Trabajos heavy equipment operator en Savannah, GeorgiaCrear alertas

Job Description NIGHT SHIFT DUMP TRUCK DRIVER CDL B DRIVER / AUTOMATED LOADOUT OPERATOR Department: Transload Operations Shift: Night Shift Classification: Full-Time / Safety-Sensitive Reports To: Operations Manager / Shift Leadership Position Summary The Night Shift Dump Truck Driver / Automated Loadout Operator is a blended position responsible for safely operating a commercial dump truck and independently loading material through AMW's automated loadout system. The driver will use a tablet to select and confirm load information, position the truck, operate the loading controls, verify weights, complete required documentation, and transport material as assigned. Because this role works primarily at night with limited direct supervision, the successful candidate must be dependable, self-motivated, safety-focused, and able to recognize and communicate problems before they affect employees, equipment, product quality, customers, or delivery schedules. Key Responsibilities Commercial Driving and Delivery · Safely operate a dump truck and related commercial equipment in compliance with company policy and all applicable DOT, state, and local requirements. · Perform assigned nighttime material movements and deliveries while following approved routes, schedules, site rules, and customer instructions. · Complete thorough pre-trip and post-trip inspections and promptly report defects, damage, maintenance concerns, incidents, or unsafe conditions. · Maintain legal axle and gross vehicle weights and ensure the load is properly distributed, contained, and secure before travel. Automated Self-Loading Operations · Use a company-provided tablet and automated loading system to select the correct order, customer, material, destination, and target weight before loading. · Confirm the truck is correctly positioned and that the loading area is clear before initiating the load cycle. · Monitor the entire load cycle, verify displayed weights and alarms, and stop the process immediately if an unsafe condition, wrong product, equipment issue, or abnormal reading is observed. · Follow approved procedures for load verification, scale tickets, load adjustments, and system shutdown. Never bypass safeguards or attempt repairs outside authorized training. Documentation and Communication · Accurately complete electronic and paper load records, inspection reports, delivery tickets, fuel records, and other required documentation. · Maintain timely communication with operations leadership regarding completed loads, delays, product or weight discrepancies, equipment alarms, breakdowns, customer concerns, and emergencies. · Protect customer, shipment, and company information and ensure each load is matched to the correct documentation before departure. Night Shift Ownership · Work independently and remain productive with limited supervision while following established priorities and procedures. · Plan work to meet loading and delivery expectations without sacrificing safety, accuracy, equipment care, or product integrity. · Maintain the truck cab, dump body, loadout area, and assigned workspaces in a clean and orderly condition. · Support other terminal duties within training and qualification when operational needs require. Required Qualifications · Valid Class B Commercial Driver's License (CDL B) with an acceptable driving record. · Ability to meet all applicable DOT driver qualification, medical certification, and drug/alcohol testing requirements. · Demonstrated experience safely operating dump trucks, tractor-trailers, or comparable heavy commercial vehicles. · Ability and willingness to work a night-shift schedule, including overtime, weekends, or holidays when business needs require. · Comfort using a tablet, touchscreen controls, electronic forms, and basic automated equipment interfaces. · Ability to read and follow load instructions, safety procedures, warning messages, delivery documents, and posted signage. · Reliable attendance, sound judgment, and the ability to work independently in a safety-sensitive environment. Preferred Qualifications · Two or more years of commercial driving experience, preferably involving dump trailers, bulk materials, terminals, ports, warehouses, construction, or industrial facilities. · Experience with automated loadout systems, truck scales, electronic logging devices, or transportation management applications. · Basic mechanical awareness and experience recognizing abnormal equipment sounds, alarms, leaks, or operating conditions. Core Competencies · Safety ownership and rule compliance · Self-motivation and personal accountability · Attention to load, product, and documentation accuracy · Dependability and time management · Clear communication and timely escalation · Good judgment under limited supervision Physical and Work Environment Requirements · Regularly enter and exit commercial vehicles, climb steps and ladders, bend, reach, and perform vehicle and load inspections. · Work outdoors and in industrial areas during nighttime hours in heat, cold, rain, dust, noise, and changing weather conditions. · Maintain the visual, hearing, physical, and cognitive ability required to safely operate a commercial motor vehicle and automated loading equipment. · Wear required personal protective equipment and comply with all AMW, customer-site, and regulatory safety requirements. Performance Expectations Success in this role is measured by safe driving, accurate self-loading, on-time completion of assignments, complete documentation, proper equipment care, reliable attendance, and prompt communication when conditions require assistance or escalation. Equal Opportunity Statement Atlantic Marine Warehouse is an equal opportunity employer. Employment decisions are made without regard to any status protected by applicable law. Reasonable accommodations may be provided to qualified individuals with disabilities in accordance with applicable law. \nCompany Description Atlantic Marine Warehouse Co (AMWCO) is an asset-based company with CSX rail served locations in Savannah, GA. AMWCO provides warehousing, distribution, cargo handling, transloading and container drayage services to third party clients. We believe great work starts with a great environment. Our culture is built on respect, collaboration, and growth. Every team member is encouraged to share ideas, solve problems together, and contribute to the success of the organization. We value people who take pride in their work, support their teammates, and bring a positive attitude to challenges. Our leadership team maintains an open-door approach, making sure communication is transparent and everyone feels heard. When you join our team, you’re not just taking a job—you’re becoming part of a group that values integrity, accountability, teamwork, and continuous improvement. Atlantic Marine Warehouse Co (AMWCO) is an asset-based company with CSX rail served locations in Savannah, GA. AMWCO provides warehousing, distribution, cargo handling, transloading and container drayage services to third party clients.\r\n\r\nWe believe great work starts with a great environment. Our culture is built on respect, collaboration, and growth. Every team member is encouraged to share ideas, solve problems together, and contribute to the success of the organization.\r\n\r\nWe value people who take pride in their work, support their teammates, and bring a positive attitude to challenges. Our leadership team maintains an open-door approach, making sure communication is transparent and everyone feels heard.\r\n\r\nWhen you join our team, you’re not just taking a job—you’re becoming part of a group that values integrity, accountability, teamwork, and continuous improvement.

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As the Rental Shop Technician you will be responsible for diagnosing and performing mechanical, electrical, hydraulic, and pneumatic repairs on a variety of rental, customer equipment, and tools. Additionally support management in the overall safety, operational workflow, improve equipment quality, and development of reporting technicians. Primary Responsibilities: • Inspect, diagnose, troubleshoot and locate mechanical deficiencies on heavy equipment diesel engines and components., • Repair and/or replace all components of light and heavy frame assemblies, suspension systems drive trains, electrical systems, steering, braking, material handling, and operator comfort systems., • Determine extent of necessary repairs including identifying major engine and transmission overhaul needs and prepare orders for required services., • Tune up engines; diagnose computer controls, modules and air conditioning components using diagnostic equipment., • Perform welding and brazing, fabricate and modify parts, equipment, miscellaneous structures and attachments., • Complete all documentation (work orders, parts orders, inspections, warranty support, comments and time sheets) in a legible, accurate and timely manner., • Perform all work in accordance with established time, quality standards and safety procedures.Additional Responsibilities:, • Participate in required safety program, and work in a safe manner., • Additional duties as assigned by manager.Who We Are Looking For: To be successful in this position you should have a strong mechanical aptitude, knowledge of tools applicable to the position and the desire to learn. You should possess a strong sense of urgency and desire to provide superior customer service. The ability to take direction and work in a team environment is essential to this position as well. Education/Experience: • High school diploma or equivalent preferred.Required Qualifications/Skills:, • Knowledge of complex hydraulics, electrical, computer and mechanical systems, arc and oxygen acetylene welding, test equipment used to diagnose and repair equipment and electronic components of vehicles., • Ability to operate a variety of equipment safely to diagnose, adjust and repair malfunctions; follow oral and written instructions; read and understand operators and repair manuals; work cooperatively with others; work with minimal supervision and keep required records., • Ability to read, analyzes, and interpret technical information- schematics, technical manuals, technical drawings, technical procedures, and governmental regulations, • Operate equipment and vehicles with possession of all necessary licenses and certificates., • Skilled in ‘Basic’ computer applications including email and internet usage., • The ability to communicate through email- sending & receiving notes, attachments., • Ability to read, analyzes, and communicate technical information., • Ability to write service reports that effectively communicate required information in an understandable (clear and concise) and useable method., • Ability to ask and properly respond to questions from customers and supervisors. Preferred Qualifications/Skills:, • Course work from accredited trade school, college or university with emphasis in mechanics, hydraulics, and automotive electronics is desirable.Values: At Yancey Bros. Co, we are always looking to add people to our team who share our core values: • Safety: We value the lives and health of our team and customers above all else., • Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly., • Teamwork: We work as one across our organization for the benefit of our customers., • Excellence: We strive to be the best, continuously improving our customers’ experience and the solutions we provide., • Sense of Urgency: We respond quickly to customer needs and hold ourselves accountable for results. Ideal candidates will demonstrate the following values: • Acting in a safe manner, • Exhibiting honesty and integrity, • Acting in a fair and ethical manner, • Team mentality, • Delivering quality results, • Embraces change / improvement, • Exhibiting superior customer service skills, • Exhibiting pride and ownership, • Working with a sense of urgency, • Exhibiting a winning attitude What We Offer: Yancey Bros. Co. offers a full benefits package that includes aggressive compensation levels, technician tool allowances, full medical, vision and dental coverage, employee wellness programs, paid vacations and more. Competitive Pay Structure • Competitive Pay, • Individual Bonus Opportunities Available, • Technician Tool Allowance, • 401k Plan Strong Company Match, • Employee Profit Sharing, • Financial Wellness CoachingEmployee Wellness Program, • Medical, Vision, Dental Insurance, • Prescription Drug Coverage, • Flexible Spending Accounts, • Short & Long Term Disability, • Group Life InsurancePersonal Time Off, • Paid Holidays, • Paid Sick Leave Career Development, • Tuition Reimbursement, • Ongoing Training, • Advancement Opportunities

Job Description Summary The Equipment Operator will work collaboratively with the Laborers and Foreman for completion of jobsite activities. Essential Duties and Responsibilities • Ability to operate various pieces of heavy equipment, including excavators, loaders, dozers, graders, rollers, backhoes, etc., • Use various pieces of equipment to perform fine grading and finishing, sloping, and banking, backfilling, demolition, ditching, loading, excavating, and stockpiling., • Utilize GPS systems, read and understand grade stakes and hubs for grade control and finishing, • Ensure adherence to safe work practices and procedures, • Work outdoors on location in all weather conditions and on all terrain, • Perform daily safety and maintenance checks on equipment, • Repair or assist in the repair and maintenance of the construction vehicles, • Perform preventive maintenance on equipment as required including fluid and filter changes and parts lubrication, • Clean equipment as scheduled or when required, • Ensure equipment is safely and securely stored when finished for the day, • Practice workplace safety per OSHA standards, • Ability to work independently and to stay on top of the schedule, • Willingness to do work outside of equipment operations, which includes but is not limited to general labor work, • Maintains a neat appearance and dresses appropriately for the job, • Good attendance, • Is a team player, and communicates well, • Presents a positive attitude about the company and the job Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience • Proven ability to operate heavy equipment, • Valid driver/operator license, • High school diploma or equivalent or at least one year of experience, • Knowledge of light and heavy equipment operation and maintenance, • Knowledge of basic equipment and vehicle inspection and maintenance including tire pressure, checking oil and water levels, • Ability to read, understand, follow, and enforce safety procedures, • Must always present a professional image, representing self and company in a professional, courteous and respectful manner when dealing with customers, vendors, employees and the public, • Skilled with various hand and power tools, • Competent operating excavators, backhoe, trencher, etc. Physical Requirements • Sit, stand, and walk continuously throughout the scheduled workday, • Stand, reach, drive and use fine motor skills frequently throughout the day, • Bend, kneel, squat, and climb throughout the workday, • Lift from 10 to 150 pounds, • Work both indoors and outdoors, exposed to all weather conditions and may be in loud environments, • Must work in a manner that will not jeopardize the health and safety of him/herself or others Language Skills • Must be able to read and comprehend English The above statements reflect the general details necessary to describe the principal functions of the occupation described and shall not be construed as a detailed description of all the work requirements that may be inherent in the occupation. All applicants must be willing to submit to a pre-employmentdrug test, background check, and motor vehicle recordcheck. Equal opportunity employer, including veterans, and individuals with disabilities

Job Description Job Summary Dredgit Corporation is seeking an experienced Excavator Operator to support a dike-raising project in Jasper County, SC. This role is responsible for safely and efficiently operating a hydraulic excavator to raise, widen, and armor the perimeter containment dike to design crest elevation, working closely with dozer operators, dump truck/haul operators, and survey crews to keep the dike-raising work progressing on schedule. This is physically demanding, outdoor work performed on a remote marsh/barrier island site with soft, saturated ground and tidally influenced conditions. Minimum Qualifications • Minimum 5 years of verifiable experience operating hydraulic excavators (25,000 lb class and larger) on heavy civil, dredging, or marine/wetland construction projects, • Prior experience working on dike/levee raising, dredged material containment area (DMCA) construction, or similar marsh/wetland island earthwork strongly preferred, • Experience operating on soft, unstable, or saturated marsh/wetland ground (mats, timber crane pads, geotextile-reinforced surfaces), • Working knowledge of dike raising sequencing (lift construction, crest widening, slope armoring, borrow excavation), • Comfortable working on a remote island site accessed by barge or boat, with limited land-based access, • Valid driver's license; ability to obtain and maintain a TWIC (Transportation Worker Identification Credential) card, • Ability to pass a pre-employment and random drug/alcohol screening (DOT and/or company policy), • OSHA 10-Hour or OSHA 30-Hour construction certification preferred, • Ability to read and interpret grade stakes, survey markers, and basic grading/cross-section plans, • Physical ability to climb in and out of equipment, work outdoors in all weather conditions (including coastal SC heat/humidity), and perform pre/post-shift inspections Skills Required • Precise bucket and boom control for fine grading, borrow excavation, and dike lift placement in confined/wet marsh conditions, • Ability to excavate borrow material and place it in controlled lifts to raise the existing dike to design crest elevation and section, • Skilled at shaping and maintaining dike slopes, crest width, and toe drains/ditches to design tolerances, • Competent at loading dump trucks, off-road haul trucks, or barges as directed, • Strong spatial awareness for working near water, tidal marsh, soft ground, and other mobile equipment, • Ability to perform routine equipment maintenance checks (fluids, undercarriage, hydraulics) and report mechanical issues, • Understanding of erosion/sediment control and turbidity control practices in a coastal marsh environment, • Effective communication with ground personnel, spotters, and other operators via radio/hand signals Key Responsibilities • Operate a hydraulic excavator to raise the existing perimeter containment dike to design crest elevation, width, and slope, • Excavate borrow material (on-site or from designated borrow areas) and place it in controlled lifts along the dike alignment, • Shape and maintain dike side slopes, crest, and toe drainage ditches to plan grade and cross-section, • Load dump trucks, haul trucks, or barges with borrow/fill material as directed by the superintendent/foreman, • Move and reposition timber mats, geotextile fabric, and crane pads to support safe equipment travel over soft marsh ground, • Coordinate with dozer and haul operators to maintain efficient material flow along the dike-raising alignment, • Conduct daily pre- and post-operation equipment inspections; complete inspection checklists and report defects immediately, • Follow all site-specific safety plans, including fall protection, tidal/marine safety, and remote-site/water access protocols, • Attend and participate in daily safety briefings/tailgate talks and toolbox meetings, • Maintain accurate awareness of survey control points, existing dike infrastructure, and environmentally sensitive areas (oyster beds, marsh habitat), • Perform other equipment operation duties as assigned in support of the dike-raising project \nCompany Description Founded in 2011, Dredgit® Corporation is a family-owned, self-perform specialty contractor based in Houston, Texas. We provide critical infrastructure maintenance services through four operating divisions: Marine, Environmental, Civil and Industrial. Over the past 11 years, we have safely executed a variety of challenging projects in some tough environments. Our customers include the U.S. Army Corps of Engineers, U.S. Coast Guard, state/local governments, and large, well-known industrial companies in the pulp and paper, petrochemical, refining, liquified natural gas, and power generation industries. Founded in 2011, Dredgit® Corporation is a family-owned, self-perform specialty contractor based in Houston, Texas. We provide critical infrastructure maintenance services through four operating divisions: Marine, Environmental, Civil and Industrial.\r\n\r\nOver the past 11 years, we have safely executed a variety of challenging projects in some tough environments. Our customers include the U.S. Army Corps of Engineers, U.S. Coast Guard, state/local governments, and large, well-known industrial companies in the pulp and paper, petrochemical, refining, liquified natural gas, and power generation industries.

Job Description Position Summary The Heavy Equipment Operator is responsible for the safe and efficient operation of heavy construction equipment in support of underground utility installation, site development, excavation, grading, and other heavy civil construction activities. This position plays a critical role in the successful completion of projects by operating equipment with precision while maintaining compliance with company policies, safety regulations, project specifications, and federal installation requirements. Essential Duties and Responsibilities: • Safely operate heavy construction equipment, including but not limited to:, • Hydraulic excavators, • Backhoes, • Bulldozers, • Wheel loaders, • Skid steer loaders, • Rollers/ Compactors, • Articulated dump trucks, • Motor graders, • Telehandlers (when qualified), • Perform excavation, trenching, grading, backfilling, and material handling for underground utility installation, including water, sanitary sewer, storm drainage, force main, and related infrastructure., • Excavate around existing underground utilities while maintaining required clearances and minimizing risk of damage., • Read and interpret construction drawings, blueprints, utility plans, grade stakes, cut sheets, and project specifications., • Assist with the installation of underground utilities by excavating to proper depth and grade., • Work closely with pipe crews, laborers, survey personnel, and supervisors to ensure work is completed safely, accurately, and efficiently., • Perform daily pre-trip and post-operation equipment inspections and report any mechanical deficiencies immediately., • Conduct routine equipment maintenance, including fueling, greasing, cleaning, checking fluid levels, and monitoring machine performance., • Identify unsafe conditions and immediately report hazards, damaged utilities, or equipment issues., • Assist with loading, unloading, transporting, and securing equipment and materials as needed., • Follow all company safety policies, OSHA regulations, project-specific requirements, and federal installation security protocols., • Wear required personal protective equipment (PPE) and actively participate in safety meetings and training., • Maintain a clean and organized work area and assist with general labor duties when equipment operation is not required., • Represent the company professionally while interacting with clients, inspectors, subcontractors, and government personnel., • Perform other duties as assigned. Required Qualifications: • High school diploma or GED preferred., • US Citizen, • Minimum of two (2) years of experience operating heavy construction equipment in heavy civil or underground utility construction., • Demonstrated ability to safely operate multiple types of heavy equipment., • Working knowledge of excavation safety and trenching requirements., • Ability to interpret blueprints, grade stakes, utility markings, and project plans., • Valid driver's license with an acceptable driving record., • Ability to obtain and maintain access to federal, military, and other secure project sites, including successfully passing required background screenings when applicable., • Strong communication skills and the ability to work effectively within a team environment. Preferred Qualifications: • Commercial Driver's License (CDL), • OSHA 10-Hour or OSHA 30-Hour Construction Certification, • NCCER Heavy Equipment Operator Certification, • Competent Person – Excavation Safety Training, • Experience with GPS machine control systems, • Experience performing work on federal or military construction projects Knowledge, Skills, and Abilities: • Safe operation of heavy construction equipment., • Knowledge of underground utility installation methods and practices., • Understanding of excavation safety, trench protection, and utility locating procedures., • Ability to recognize and avoid underground utility conflicts., • Strong mechanical aptitude and ability to identify equipment issues., • Excellent situational awareness and commitment to safety., • Ability to work independently while maintaining communication with supervisors and crew members., • Strong work ethic, reliability, and attention to detail. Physical Requirements: • Ability to sit for extended periods while operating equipment., • Frequently climb on and off heavy equipment., • Lift, carry, push, and pull up to 50 pounds., • Walk on uneven terrain and work around active construction sites., • Frequently bend, stoop, kneel, crouch, and climb., • Ability to work outdoors in varying weather conditions, including heat, cold, rain, and humidity. Working Conditions: • Heavy civil construction sites, utility projects, and federal installations., • Exposure to loud noise, dust, vibration, heavy equipment, moving vehicles, and changing weather conditions., • Overtime, weekend work, travel, and overnight stays may be required based on project needs., • Must comply with all company policies, customer requirements, and applicable federal, state, and local regulations. Core Competencies: • Safety First, • Integrity and Accountability, • Teamwork and Collaboration, • Communication, • Dependability, • Quality Workmanship, • Adaptability, • Problem Solving, • Professionalism\nCompany Description SG Development & Consulting Inc. was established in 2020 by Scott Silvia and Travis Garland, two accomplished entrepreneurs and 24-year veterans of the United States Navy. Having served together on multiple tours of duty, Scott and Travis forged a strong personal and professional bond built on trust, discipline, and shared leadership. During and after retiring from active duty, both Scott and Travis made successful transitions to civilian life by individually owning and operating other businesses. These ventures equipped them with invaluable experience in leadership, operations, and client service—skills that laid the groundwork for their next ambitious endeavor: SG Development & Consulting Inc. Driven by a shared vision and a commitment to excellence, they founded what has quickly become one of the fastest-growing construction companies in the region. Their military-honed values—integrity, accountability, and precision—form the foundation of the company’s culture and operations. Today, SG Development & Consulting Inc. stands out for its mission-focused approach, reliable execution, and deep industry expertise, delivering high-quality construction solutions to clients across a range of sectors. SG Development & Consulting Inc. was established in 2020 by Scott Silvia and Travis Garland, two accomplished entrepreneurs and 24-year veterans of the United States Navy. Having served together on multiple tours of duty, Scott and Travis forged a strong personal and professional bond built on trust, discipline, and shared leadership.\r\n\r\nDuring and after retiring from active duty, both Scott and Travis made successful transitions to civilian life by individually owning and operating other businesses. These ventures equipped them with invaluable experience in leadership, operations, and client service—skills that laid the groundwork for their next ambitious endeavor: SG Development & Consulting Inc.\r\n\r\nDriven by a shared vision and a commitment to excellence, they founded what has quickly become one of the fastest-growing construction companies in the region. Their military-honed values—integrity, accountability, and precision—form the foundation of the company’s culture and operations.\r\n\r\nToday, SG Development & Consulting Inc. stands out for its mission-focused approach, reliable execution, and deep industry expertise, delivering high-quality construction solutions to clients across a range of sectors.

Job Description Job Summary Dredgit Corporation is seeking an experienced Dozer Operator to support a dike-raising project at the Jones Oyster Bed Island Dredged Material Containment Area (DMCA) in Jasper County, SC. This role is responsible for pushing, spreading, and grading borrow/fill material to build up the perimeter containment dike to design crest elevation and cross-section, while operating safely on soft, saturated, and tidally influenced marsh ground. The operator will work closely with excavator and haul truck operators to maintain material flow and stay on the dike-raising schedule. Minimum Qualifications • Minimum 5 years of verifiable experience operating track-type dozers (D6 class and larger, or equivalent) on heavy civil, dredging, or marine/wetland construction projects, • Prior experience working on dike/levee raising, dredged material containment area (DMCA) construction, or similar marsh/wetland island earthwork strongly preferred, • Experience spreading and compacting fill in controlled lifts on soft, low-bearing-capacity marsh/wetland ground preferred, • Working knowledge of dike raising sequencing (lift construction, crest widening, slope shaping/armoring), • Comfortable working on a remote island site accessed by barge or boat, with limited land-based access, • Valid driver's license; ability to obtain and maintain a TWIC card, • Ability to pass a pre-employment and random drug/alcohol screening, • OSHA 10-Hour construction certification required; OSHA 30-Hour preferred, • Ability to read and interpret grade stakes, survey markers, and basic grading/cross-section plans, • Physical ability to climb in and out of equipment, work outdoors in all weather conditions (including coastal SC heat/humidity), and perform pre/post-shift inspections Skills Required • Precise blade control for spreading, leveling, and fine grading borrow/fill material to design dike elevations and slopes, • Ability to build up and shape dike lifts in defined stages as borrow material is placed, • Skilled at operating on soft, unstable, or saturated marsh ground without becoming stuck or damaging containment structures, • Understanding of lift compaction sequencing and material drying/consolidation practices for dike raising, • Ability to identify and avoid soft spots, tidal creeks, and unstable sections of the existing dike, • Strong coordination skills for working in tight sequence with excavators and haul trucks along a linear dike alignment, • Ability to perform routine equipment maintenance checks (fluids, undercarriage, track tension) and report mechanical issues, • Effective communication with ground personnel, spotters, and other operators via radio/hand signals Key Responsibilities • Push, spread, and grade borrow/fill material to raise the perimeter containment dike to the elevations, width, and slopes specified in the design plan, • Build up dike lifts in sequence from excavator-placed borrow material, maintaining consistent lift thickness, • Maintain safe, stable working surfaces for other equipment operating along the dike alignment, • Assist in maintaining haul roads and equipment travel paths across soft/saturated marsh ground, • Monitor lift stability and flag sections requiring additional material, drying time, or rework, • Coordinate with excavator and haul truck operators to keep material placement on pace with the dike-raising schedule, • Conduct daily pre- and post-operation equipment inspections; complete inspection checklists and report defects immediately, • Follow all site-specific safety plans, including equipment travel over soft ground and tidal/marine safety protocols, • Attend and participate in daily safety briefings/tailgate talks and toolbox meetings, • Maintain awareness of survey control points, existing dike infrastructure, and environmentally sensitive areas (oyster beds, marsh habitat), • Perform other equipment operation duties as assigned in support of the dike-raising project \nCompany Description Founded in 2011, Dredgit® Corporation is a family-owned, self-perform specialty contractor based in Houston, Texas. We provide critical infrastructure maintenance services through four operating divisions: Marine, Environmental, Civil and Industrial. Over the past 11 years, we have safely executed a variety of challenging projects in some tough environments. Our customers include the U.S. Army Corps of Engineers, U.S. Coast Guard, state/local governments, and large, well-known industrial companies in the pulp and paper, petrochemical, refining, liquified natural gas, and power generation industries. Founded in 2011, Dredgit® Corporation is a family-owned, self-perform specialty contractor based in Houston, Texas. We provide critical infrastructure maintenance services through four operating divisions: Marine, Environmental, Civil and Industrial.\r\n\r\nOver the past 11 years, we have safely executed a variety of challenging projects in some tough environments. Our customers include the U.S. Army Corps of Engineers, U.S. Coast Guard, state/local governments, and large, well-known industrial companies in the pulp and paper, petrochemical, refining, liquified natural gas, and power generation industries.

Job DescriptionHeavy Equipment Operator Bulk Handling Marine Terminal – Savannah, Georgia Position Summary The Heavy Equipment Operator supports bulk cargo operations at a Savannah-based marine terminal, safely operating loaders, dozers, excavators, and other specialized mobile equipment in support of vessel loading and discharge, truck and rail movements, and stockpile management. This role operates within an active port environment requiring strict adherence to safety standards, security protocols, Lean 5S standards and productivity expectations to support vessel turnaround times and customer commitments. Operators are expected to contribute to safe, efficient, and environmentally responsible terminal operations. Essential Duties and Responsibilities • Conduct and document pre-shift equipment inspections in compliance with company and port safety standards., • Safely operate front-end loaders, dozers, excavators, and other heavy specialized equipment to:, • Load and discharge bulk cargo from ocean-going vessels and barges, • Load trucks and railcars for outbound shipments, • Build, manage, and reclaim stockpiles, • Perform terminal cleanup and material transfers, • Operate tandem dump trucks or similar equipment to transport materials within the terminal yard., • Maintain safe working distances around vessel operations, stevedoring crews, truck traffic, rail movements, and other heavy equipment., • Comply with all OSHA regulations, US Coast Guard requirements, and Maritime Transportation Security Act (MTSA) security standards., • Adhere to all Port access requirements and terminal security procedures., • Report mechanical issues promptly and coordinate repairs to minimize operational downtime., • Participate in safety meetings, job briefings, and required maritime safety training., • Support terminal operations during peak vessel schedules, weather events, or surge activity., • Perform additional duties as assigned to support overall terminal productivity.Qualifications, • Minimum of one (1) year of experience operating heavy equipment, including loaders, dozers, and excavators; bulk material handling or port experience preferred., • High school diploma or GED equivalent., • Valid driver’s license required., • Ability to obtain and maintain a Transportation Worker Identification Credential (TWIC)., • Ability to pass pre-employment drug screening, physical examination, and background check., • Willingness to work rotating shifts, including days, nights, weekends, holidays, and extended hours based on vessel schedules., • Ability to work outdoors year-round in heat, humidity, rain, and other coastal weather conditions common to Southeast Georgia.Knowledge, Skills, and Abilities, • Understanding of bulk cargo handling procedures and marine terminal operations., • Strong safety awareness in high-traffic, port environments., • Ability to operate equipment safely around vessels, ship loaders, conveyors, and rail operations., • Basic mechanical troubleshooting skills., • Ability to communicate effectively with supervisors, stevedores, and terminal personnel., • Commitment to safety, productivity, and teamwork.Work EnvironmentWork is performed outdoors in an active marine terminal along the Savannah River. Employees may be exposed to heavy equipment traffic, vessel operations, dust, noise, and varying weather conditions including heat and humidity. Physical requirements include climbing up to 120 feet, boarding vessels, lifting up to 50 lbs., prolonged sitting, and manual labor.DisclaimerThis job description is not intended to cover or contain a comprehensive listing of activities, duties, or responsibilities. Duties may change at any time with or without notice to meet operational and vessel scheduling needs.

Job Description SUMMARY OF POSITION The primary responsibility of the Crane Operator is to safely and efficiently load and unload cargo from vessels. This position also performs highly skilled work involving the operation and general maintenance of a variety of heavy equipment used in maritime and terminal operations. The Crane Operator must be qualified to operate various types of equipment, including cranes, container handlers/stackers, yard hustlers, forklifts, farm equipment, heavy industrial and construction equipment, and tractor-trailers. This position requires a high level of skill in the safe and efficient operation of large and heavy equipment and a thorough understanding of vessel, terminal, and cargo-handling operations. ESSENTIAL DUTIES AND RESPONSIBILITIES • Safely and efficiently operate gantry cranes, container handlers, forklifts, yard hustlers, and other vessel and terminal support equipment., • Load, unload, move, stack, and position cargo in accordance with established operating and safety procedures., • Perform preventive maintenance, corrosion control, corrective maintenance, and minor repairs on assigned equipment, as appropriate., • Complete required daily, monthly, and annual equipment and safety inspections; accurately document results in applicable equipment or machinery logs and assist with corrective actions as needed., • Maintain qualification and proficiency in vessel operations, terminal support, and warehouse support equipment as required., • Participate in the training of support personnel, including flagmen, oilers, yard personnel, and new equipment operators., • Maintain proficiency standards established by management and participate in operator proficiency evaluations as required., • Demonstrate thorough knowledge of the proper care, operation, and safe use of light and heavy equipment used in maritime operations., • Understand and comply with applicable laws, regulations, safety standards, company policies, and operating procedures., • Know and correctly use standard hand signals required for crane operations and ensure compliance with established signaling procedures., • Maintain awareness of surrounding personnel, equipment, cargo, and changing conditions to ensure safe operations., • Perform additional duties as assigned. POSITION REQUIREMENTS • Previous crane operating experience required., • Previous experience in the stevedoring or maritime industry preferred., • High school diploma or equivalent required., • Forklift certification required., • Valid Transportation Worker Identification Credential (TWIC) required., • Ability to understand and correctly interpret equipment load charts., • Ability to recognize and respond appropriately to changing conditions that may affect the safe operation of a crane or other equipment., • Ability to pick, carry, swing, position, and place loads smoothly, accurately, and safely., • Strong mechanical aptitude, problem-solving ability, and sound judgment., • Ability to communicate effectively with supervisors, team members, and support personnel using radio communication, verbal instructions, and/or standard hand signals., • Ability to work effectively as part of a team and provide leadership or direction when required., • Strong organizational and time-management skills., • Resourceful, dependable, and able to manage multiple responsibilities., • Ability to communicate and work effectively with individuals from diverse backgrounds and roles., • Ability to work overtime, including weekdays, weekends, holidays, and varying shifts as operational needs require., • Ability to successfully complete all required pre-employment and/or ongoing screening requirements, including drug screening, physical examination, and background check. Required Operational Knowledge Basic knowledge and demonstrated understanding of the following: • Equipment and workplace safety procedures, • Truck and equipment inspections, • Storage and exchange points, • Counterbalance principles, • Stability triangle, • Center of gravity, • Equipment terminology, • Attachments and load centers, • Battery inspection, • Material-handling procedures, • Loading and de-stacking, • Unloading and stacking, • Counterbalance equipment operation, • Traveling on ramps and within trailers, • Equipment parking and securing procedures COMPETENCIES Verbal and Written Comprehension Ability to understand and follow oral and written instructions, including general, technical, and safety-related communications. Communication Skills Ability to communicate clearly and effectively and provide accurate instructions and directions. Reasoning and Problem Solving Ability to identify operational issues, troubleshoot problems, assess changing conditions, and determine appropriate courses of action. Time Management and Organization Ability to effectively manage time, prioritize responsibilities, and handle a broad range of activities in a fast-paced operational environment. Safety Awareness Demonstrates consistent awareness of workplace hazards and follows established safety procedures, regulations, and operating practices. Teamwork and Leadership Works effectively with others and demonstrates the ability to provide guidance, instruction, and leadership when necessary. PHYSICAL DEMANDS / WORK ENVIRONMENT While performing the duties of this position, the employee is regularly required to stand, walk, use hands to handle or operate equipment and controls, and reach with hands and arms. The position may require climbing, bending, stooping, and working at varying heights. The employee must be able to lift, carry, push, pull, and/or move up to 50 pounds unassisted. The work environment includes hazards and conditions typical of maritime, terminal, and heavy-equipment operations, including exposure to moving machinery, heavy equipment, elevated work areas, cargo-handling operations, chemicals, and other industrial hazards. Employees may be exposed to varying and potentially extreme weather conditions, temperatures, ventilation, lighting, noise levels, and other environmental conditions. Appropriate personal protective equipment (PPE) must be worn as required. The employee must be able to safely perform the essential functions of the position with or without reasonable accommodation.

Job Description *Looking for Traveling Heavy Equipment Operators with paid Per Diem, working throughout Georgia, South Carolina, North Carolina, Tennessee and the Florida Panhandle* We are looking for experienced Heavy Equipment Operators that are willing to travel throughout the Southeastern United States, with specific experience in track hoes and dozers. Candidates must show a strong interest in learning. A dedicated career development plan will be provided to help you advance your career. Equipment Operator • Mainline Hoe Operator: ability to dig trenches for sewer and set trench boxes, • GPS Dozer Operator a plus: requires extensive GPS Trimble knowledge and ability to fine grade Requirements: • Must have valid driver's license, • Must be a U.S. Citizen, • Must participate in pre-employment and random drug screening program., • Subject to a background screening process C. A. Murren is a full-service, well established industrial, civil, and power industry contractor performing work throughout the Southeastern and Mid-Atlantic United States with offices located in Georgia, Florida, South Carolina and Virginia. For more than 40 years, we have offered the highest levels of industrial site development performance and we are proud of our long legacy of serving the Southeast. Our philosophy is to focus on both the human element and the high quality, sustainable construction that makes us who we are. We are completely dedicated to serving our clients and the team members who make C. A. Murren a team and family-oriented experience like few others. We pride ourselves in over 40 years of safety and quality work in the heavy civil construction industry. We have an excellent benefits package which includes, medical, dental, vision, and 401K match! We also have a career development plan which offers continued growth for your career goals! We are seeking Heavy Equipment Operators with 2+ years of experience with heavy civil construction experience. These positions are based throughout the Southeastern United States. If you are passionate about construction and have 2+ years’ experience as a Heavy Equipment Operator for heavy civil sites, please apply below. Also, please check out our company. https://camurren.com/about-us/

Job DescriptionJob Title: Ship Gear Crane Operator Location: Bulk Handling Marine Terminal Position SummaryThe Ship Gear Crane Operator is responsible for the safe and efficient operation of vessel-mounted cranes (ship’s gear) during bulk cargo loading and discharge operations at a marine terminal. This role plays a critical part in maintaining production targets while ensuring compliance with all safety, environmental, and regulatory requirements.The operator must demonstrate strong situational awareness, precision control skills, and the ability to coordinate effectively with stevedores, signal persons, equipment operators, and vessel crews. Operational Duties • Operate ship-mounted cranes and other specialized heavy equipment to load and discharge bulk commodities such as aggregates, fertilizers, and other dry bulk materials., • Perform precise hoisting, swinging, and placement of clamshell buckets, hooks, or other lifting attachments., • Maintain steady production rates while minimizing cargo spillage and equipment wear., • Coordinate with Stevedore and terminal supervisors to ensure smooth cargo flow., • Conduct pre-shift equipment inspections and report mechanical or operational concerns immediately., • Monitor load limits, boom angles, and operating conditions to prevent overload or unsafe operations., • Adjust crane operations based on vessel trim, list, weather conditions, and cargo type.Safety & Compliance, • Follow all terminal safety policies, OSHA regulations, and maritime industry standards., • Adhere to site-specific safety procedures and lockout/tagout requirements., • Maintain clear communication via radio and hand signals., • Stop operations immediately if unsafe conditions arise., • Participate in safety meetings, and ongoing training.Equipment & Maintenance, • Inspect wire ropes, sheaves, hooks, clamshells, and lifting gear prior to and during operations., • Ensure proper rigging and attachment of lifting devices., • Report equipment damage, unusual vibrations, hydraulic leaks, or electrical issues., • Assist maintenance personnel with troubleshooting when required.Qualifications, • High school diploma or equivalent preferred., • Proven experience operating ship’s gear cranes or similar heavy lift cranes in a marine or industrial environment., • Knowledge of bulk cargo handling operations., • Ability to read load charts and understand crane capacity limitations., • Strong understanding of safe lifting practices and signaling procedures., • Valid TWIC card (or ability to obtain)., • Ability to work rotating shifts, weekends, holidays, and extended hours based on vessel schedules.Skills & Competencies, • Excellent hand-eye coordination and depth perception., • Strong focus and ability to operate equipment for extended periods., • Clear verbal communication skills., • High level of safety awareness., • Ability to work effectively as part of a team in a fast-paced marine environment., • Mechanical aptitude.Physical Requirements, • Ability to climb ladders and access crane cabs at heights., • Ability to sit for extended periods while maintaining alertness., • Tolerance for working in outdoor conditions including heat, cold, rain, and wind., • Ability to lift up to 50 lbs. as needed.Work Environment, • Marine terminal environment with exposure to noise, dust, heavy equipment traffic, and vessel operations., • Work performed on board vessels and dockside., • Variable schedule dependent on vessel arrivals and cargo demands.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities. In addition to the above job duties, employees will be expected to work in various capacities at other locations within the company based on the needs of the company. This job description is not exhaustive or intended to be all-inclusive of all job duties that may apply to an employee. Duties may change at any time with or without notice.

Job Description Looking for an experienced equipment operator to assist our team on concrete projects in: -Fort Stewart, Georgia. -Laredo, Texas. -La Place, Louisiana. -Fort Leonard Wood, Missouri. -Across the North-east coast NY, CT, MA, RI Must be able to operate various machines in various weather/site conditions. Preferred equipment: -Backhoe/excavator -Front-end loader -All terrain forklift -Dozers Candidates should be familiar with excavation rules and standards. Must be able to complete a background check. \nCompany Description At McCarthy Concrete, we’re committed to quality and innovation in everything we do. Founded in 2002, we’ve grown into a leading concrete contractor with a reputation for excellence across the industry. Giving Back We believe in giving back to the community, and support a variety of non-profit organizations throughout Connecticut and beyond. Safety + Efficiency Our team is dedicated to creating a safe and healthy work environment, and we use eco-friendly products whenever possible to reduce our impact on the planet. At McCarthy Concrete, we’re committed to quality and innovation in everything we do. Founded in 2002, we’ve grown into a leading concrete contractor with a reputation for excellence across the industry.\r\n\r\nGiving Back\r\nWe believe in giving back to the community, and support a variety of non-profit organizations throughout Connecticut and beyond.\r\n\r\nSafety + Efficiency\r\nOur team is dedicated to creating a safe and healthy work environment, and we use eco-friendly products whenever possible to reduce our impact on the planet.

Job Description Are you a Chemical Operator ready to manage specialized refining and production processes at a global chemical plant? Join SUSONITY, a leader in the chemical industry, at our Savannah manufacturing site. We're a global brand that unites proven heritage with future ambition, and we're looking for a highly motivated and experienced professional to help us embrace a bold future.Position Scope:The Operator is responsible for performing the daily production duties within their production area along with the other operators on the production team. The main activities include the manufacturing of products to ensure quality and favorable yield by following the standard operating procedures, while maintaining high standards for housekeeping, safety and environmental compliance. The operator will contribute to the site's continuous improvements utilizing the CIP database for BPS and continuous improvement ideas and may participate on 5S and L&SS projects. The operator is responsible for contributing to the site and departments key performance indicators (KPIs).Schedule & Availability: This position follows a swing shift of 5 x 12 hour shifts, per week with 2 days off in between. Must be able to work long hours on a rotating shift schedule on a regular basis and in extreme climates (high/low temperatures and humidity). Key Responsibilities:Operator areas include but not limited to: Mica Preparation, Finishing, Blending & Packaging, Repack, Non-Dust, Bismuth, and WM production.Process chemicals by following standard operating procedures on equipment such as reactors, filters, kilns, centrifuge, pumps, etc.Assure safe and environmentally compliant operation of the production processes.Package and transfer chemicals safely.Monitor and maintain equipment, including adjusting controls, cleaning, and startup/shutdown.Conduct laboratory tests and record results like PH, temperature, particle analysis, etc.Possess technical knowledge in the area of responsibilities.Participate in continuous improvements initiatives within areas of responsibility.Provide on-the-job training to other operator I and II as requested.Ability to climb stairs, ladders and walk long distances during the course of the workday.Able to move and handle heavy objects with appropriate equipment.Qualifications:A High School / GED degree.At least three years of Chemical Operations experience in a Manufacturing environment.Be proficient in the use of normal computer hardware/software.A solid understanding and application of basic math skills.Exposure to Lean Six Sigma and ISO certification.Physical Requirements:Ability to stand for extended periods.Ability to lift objects up to 50 lbs.Ability to climb ladder/stairs.Ability to bend, stoop and kneel.Ability to work in various environmental conditions (hot, cold, dusty).Ability to work in enclosed/tight spaces.Must be able to work long hours (12-14) on a rotating shift schedule on a regular basis.Must be able to work in extreme climates (high / low temperatures and humidity).Able to move and handle heavy objects with appropriate equipment.

Job Description Packaging/Labeling Equipment Operator Job Description This role operates and monitors packaging and labeling equipment in a food manufacturing environment, ensuring safe, efficient, and accurate production. You follow strict food safety and hygiene standards, perform equipment setup and data entry for product coding, and verify that all materials and labels meet specifications. You contribute to a clean, organized, and compliant production area while supporting high-quality output. Responsibilities • Adhere to all food manufacturing, safety, and hygiene requirements, consistently demonstrating excellent personal hygiene habits., • Ensure a safe working environment by following good manufacturing practices and all plant safety procedures., • Operate packaging and labeling equipment (PLE), including the accumulator, cap applicator, mead wrapper, cardboard packer, robot palletizer, and inkjet coder., • Enter SKU, lot code, and expiration date information into coding and labeling equipment according to the specification sheet., • Verify materials, codes, and labels to ensure they meet specifications, and accurately record required information on appropriate forms., • Perform routine cleaning and maintenance of equipment in accordance with operation manuals and plant standard operating procedures (SOPs)., • Use RF scanning equipment to correctly scan and track all production materials and inventory., • Handle materials and packaging components, including heavy lifting, to keep production lines supplied and running smoothly., • Monitor equipment performance and product quality, promptly reporting issues or deviations to the appropriate personnel., • Maintain neat, organized work areas and ensure proper documentation and follow-through on assigned tasks., • Manage multiple tasks and priorities in a fast-paced manufacturing environment while meeting production goals., • Collaborate with team members and communicate effectively to support continuous operations and process improvements. Essential Skills • High school diploma or equivalent., • Comfort working in a food manufacturing environment and following strict safety and hygiene standards., • Previous manufacturing, production, or warehouse experience preferred., • Ability to operate packaging machinery and material handling equipment., • Strong attention to detail to ensure accurate coding, labeling, and documentation., • Basic math skills for counting, measurements, and verification of product information., • Basic written communication skills for completing forms and production records., • Ability to use RF scanners for inventory and material tracking., • Capability to perform heavy lifting and material handling tasks as part of daily duties., • Demonstrated communication, organization, and listening skills., • Ability to organize and handle multiple tasks in a fast-paced environment., • Computer literacy for data entry and operation of coding and labeling equipment. Additional Skills & Qualifications • Previous experience in a manufacturing or warehouse setting is a plus., • Experience with inventory processes and RF scanning systems is beneficial., • Familiarity with packaging machines, robot palletizers, and inkjet coding equipment is an advantage., • Strong follow-through and neatness in completing tasks and maintaining documentation., • Comfort working in a full personal protective equipment (PPE) environment., • Reliability and consistency in following standard operating procedures and safety guidelines. Why Work Here? You join a production team that values safety, reliability, and clear communication, offering a structured schedule that balances work and time off. The 2-2-3 shift pattern provides regular extended breaks, including a three-day weekend every other week, supporting work-life balance. You work with established processes and equipment in an environment that emphasizes training, adherence to standards, and teamwork, giving you the opportunity to build stable experience in manufacturing and grow your skills over time. Work Environment This position is based in a manufacturing facility where you work in full personal protective equipment (PPE). The environment can become very hot, and you spend most of your time on or around production lines and packaging equipment. The role follows a fixed 2-2-3 schedule on either 1st shift (7:00 a.m. to 7:30 p.m.) or 2nd shift (7:00 p.m. to 7:30 a.m.), and the shift you are hired for remains your permanent shift. Over a 14-day cycle, you work 7 days and have 7 days off, with Week 1 typically including Monday and Tuesday on, Wednesday and Thursday off, then Friday through Sunday on, and Week 2 including Monday and Tuesday off, Wednesday and Thursday on, then Friday through Sunday off. You work in a production-focused setting that requires consistent use of PPE, attention to safety, and comfort with extended shifts in a busy, physically active environment. Job Type & Location This is a Contract to Hire position based out of Savannah, GA. Pay and Benefits The pay range for this position is $18.46 - $21.46/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Savannah,GA. Application Deadline This position is anticipated to close on Sep 29, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description TERMINAL OPERATOR – SHIFT LEADMAN Wood Pellet Rail Receiving & Marine Terminal Operations Location: Savannah, GA Schedule: 12-Hour Rotating Shifts | Days, Nights, Weekends & Holidays Employment Type: Full-Time JOIN OUR TERMINAL OPERATIONS TEAM We are seeking a Terminal Operator – Shift Leadman to support safe, efficient, and reliable wood pellet receiving, storage, reclaiming, and vessel-loading operations at our marine terminal. This is a working lead position responsible for coordinating shift activities, operating and monitoring terminal equipment, supporting rail and truck receiving operations, and providing day-to-day direction and training to terminal operators. WHAT YOU'LL DO • Lead daily shift operations and promote a strong safety-first culture., • Coordinate railcar spotting and unloading of bottom-dump hopper cars and truck-dump operations., • Operate and monitor PLC-controlled rail pits, conveyors, dust collection, environmental systems, and related equipment., • Operate track-mobile rail equipment and heavy equipment, including front-end loaders, after required training., • Monitor incoming wood pellets for temperature, moisture, and product-quality requirements., • Safely transfer and store product in designated dome silos., • Support product reclaiming and outbound vessel-loading operations., • Train and assist operators in safe equipment operation and terminal procedures., • Operate and monitor ship-loading equipment after qualification., • Communicate effectively with railroad personnel, vessel personnel, contractors, coworkers, and management., • Complete shift reports, inspections, equipment logs, and required operational documentation., • Maintain a clean, safe, and orderly terminal environment., • Identify and report equipment, safety, environmental, and product-quality concerns., • Support troubleshooting, preventive maintenance, and operational continuity. WHAT WE'RE LOOKING FOR • High school diploma or equivalent., • Previous heavy equipment experience, preferably front-end loader experience., • Strong mechanical aptitude and ability to learn industrial equipment and PLC control systems., • Basic computer skills, including Microsoft Word, Excel, and Outlook., • Strong communication, teamwork, leadership, and problem-solving skills., • Ability to train and work effectively with other employees., • Previous marine terminal, bulk-material handling, railroad, industrial, or vessel-loading experience is preferred., • Previous lead or supervisory experience is a plus. REQUIRED TO WORK AT OUR TERMINAL • Ability to obtain and maintain a TWIC (Transportation Worker Identification Credential)., • Successful completion of required pre-employment drug screening, background check, and physical/medical evaluation., • Ability to work a 12-hour rotating schedule, including days, nights, weekends, holidays, and overtime., • Ability to climb stairs, ladders, and elevated structures frequently., • Ability to work at heights exceeding 100 feet., • Ability to work in confined or restricted areas when properly trained and authorized., • Ability to lift up to 50 pounds., • Ability to work safely around railcars, trucks, conveyors, mobile equipment, industrial machinery, dust, noise, vibration, and changing weather conditions., • Ability to wear required PPE and follow all safety and operating procedures. WHY JOIN US? This position offers an opportunity to build a career in marine terminal operations, bulk material handling, rail operations, heavy equipment, and industrial leadership. The Shift Leadman plays an important role in developing terminal operators and maintaining safe, reliable, and efficient operations. If you are safety-focused, mechanically inclined, dependable, and ready to take the next step in terminal operations leadership, we want to hear from you. Apply today and join our team!

Job Description Moran Environmental Recovery, LLC (MER) is an integrated environmental company specialized in providing services to Energy and Industrial, Commercial and Naval Marine, Railroad and Government clients. With operations based in strategically located resource centers along the United States eastern and gulf coasts, the services we perform range in scope from routine maintenance work, utilizing vacuum trucks and high-pressure washing equipment to large-scale site remediation and abatement. Our core competencies involve specialized risk management tools and are performed in strict compliance with complex regulatory requirements. We provide these services using in-house resources, enabling exceptional quality control enjoyed by few companies in our industry. Job Summary The Vacuum Truck Operator must be able to work in compliance in the delivery of MER’s four (4) core service lines (Emergency Response, Industrial and Marine Services, Facility Decontamination, and Site Remediation). Drivers must adhere to and maintain strict compliance with corporate/office policies and procedures, established health and safety protocols, and all applicable local, state, and federal regulations. Job Responsibilities • Execution of field work encompassed in remediation and industrial maintenance projects while under direct or indirect supervision., • Drive an average of 30% of the time as well as work onsite as part of a team. Depending on location, drivers may be asked to perform the duties of a Field Technician if business needs warrant it., • Correct completion of all job-specific, employee-related and equipment-related MER paper work including Timesheets, Daily Work Reports, Driver’s Logs, Pre and Post Vehicle Inspection and Daily Tailgate Safety Meeting Forms., • Understand and enforce project’s detailed scope-of-work to maintain strict compliance with contract documents, project schedules, and corporate policies and procedures., • Work safely during all phases of performing the job duties required in the field., • Ability to perform work inside areas of varying dimensions, involving squatting and crawling for possible extended periods., • Ability to follow directions; read/speak and understand English; read and understand common danger placards / labels and hazardous warning literature including site safety plans., • The ability to safely drive and perform safety checks on all vehicles for which licensed., • Operate various vehicles safely, including but not limited to Vacuum Truck, Vacuum Trailer, Turbo-Vac, Roll-Off Truck and Hydro Vac., • Project work may require out of town travel for two weeks or more, • Must be able to understand and comply with company and client safety standards., • Due to the diversity of both scheduled and non-scheduled projects, physical demands, and environmental conditions vary significantly depending on the project., • Work outside year round in all types of weather., • May work in environments that are extreme in nature like environmental conditions such as heat, cold, heights, hazardous chemicals, loud noises, dangerous equipment, long hours etc., • May be exposed to varying levels of physical activities and physical extremes such as long periods of standing, walking, crouching, use of hands, and heavy lifting of up to 50 pounds or more., • Must be clean shaven at all times to allow immediate donning and seal of respirator. Qualifications • Must be able to effectively operate a manual transmission., • Requires High School Diploma or GED (or equivalent reading, writing and reasoning skills) and 2-3 years of experience operating vacuum trucks (or similar equipment)., • Additional experience in related work (emergency response, manual labor, industrial cleaning) is preferred., • A valid Class “A” Commercial Driver’s License (CDL) with Hazmat and Tanker endorsements is required., • Experience with construction equipment and heavy haul/end dump is required, • TWIC Preferred., • OSHA 40-HR HAZWOPER and Confined Space Entry certifications are desired but not required., • Successful completion of a pre-employment background and substance screening process including, but not limited to, employment verifications, criminal search and Motor Vehicle Record (MVR) search as well continued verifications throughout employment to ensure that all records meet company policy standards. Benefits • Competitive Salary, • Health, Dental and Vision Insurance, • 401k with Company Match, • Paid Time Off (PTO), • Paid Holidays Moran Environmental Recovery is an Equal Opportunity Employer. #HP

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As a Heavy Equipment Field Service Diesel Technician, you will be diagnosing, troubleshooting, and performing standard mechanical, electrical, hydraulic, and pneumatic repairs on customer's equipment in the field. Technicians furnish their own tools, are able to operate industry associated heavy equipment, and complete all assigned work in an accurate and timely manner. Primary Responsibilities: • Inspect, diagnose, troubleshoot, and locate mechanical deficiencies on heavy equipment diesel engines and components. Source and order parts as needed., • Determine extent of necessary repairs including identifying major powertrain overhaul needs and prepare orders for required services., • Proper use of diagnostic equipment., • Repair and/or replace all components of diesel engines hydraulic systems, air conditioning systems, suspension systems, drive trains, electrical systems, steering, braking, material handling, and operator comfort systems., • Perform welding and brazing, fabricate and modify parts, equipment, miscellaneous structures and attachments., • Complete all work orders (including warranty information) and time sheets in a legible, accurate, and timely manner., • Operate equipment and vehicles with possession of all necessary licenses and certificates., • Perform all work in accordance with established quality standards and safety procedures., • Maintain service vehicle inspection records, daily inspections and driver logs as required by the Department of Transportation (DOT)., • Must keep truck and equipment clean and presenting the best impression possible to the public., • Photograph equipment when necessary.Additional Responsibilities:, • Participate in required safety program, and work in a safe manner., • Additional duties as assigned by manager.Who We Are Looking For: To be successful in this position you should have a strong mechanical aptitude, knowledge of tools applicable to the position, and the desire to learn. You should possess a strong sense of urgency and desire to provide superior customer service. The ability to take direction and work independently is essential to this position as well. Education/Experience: • High school diploma or equivalent., • 4+ years of industry experience. Required Qualifications/Skills:, • Knowledge of complex hydraulics, electrical, computer and mechanical systems, arc and oxygen acetylene welding, test equipment used to diagnose and repair equipment and electronic components of vehicles., • Ability to operate a variety of equipment safely to diagnose, adjust and repair malfunctions; follow oral and written instructions; read and understand operators and repair manuals; work cooperatively with others; work with minimal supervision and keep required records., • Ability to read, analyzes, and interpret technical information- schematics, technical manuals, technical drawings, technical procedures, and governmental regulations, • Operate equipment and vehicles with possession of all necessary licenses and certificates., • Skilled in ‘Basic’ computer applications including email and internet usage., • The ability to communicate through email- sending & receiving notes, attachments., • Ability to read, analyzes, and communicate technical information., • Ability to write service reports that effectively communicate required information in an understandable (clear and concise) and useable method., • Ability to communicate effectively with customers and coworkers. Keep customers up-to-date using MODERN as the main method of communication., • Valid, active driver's license., • Ability to read, write, and speak English., • Ability to clear driver screenings and provide necessary information for a complete DQ file, including but not limited to:, • Road Test administered by Yancey personnel., • Background check and MVR with less than 10 points., • DOT Physical, • Drug Screen, • Must not be disqualified to drive a CMV under 49 CFR § 391.15. Preferred Qualifications/Skills:, • Course work from accredited trade school, college or university with emphasis in mechanics, hydraulics, and automotive electronics is desirable.Values: At Yancey Bros. Co, we are always looking to add people to our team who share our core values: • Safety: We value the lives and health of our team and customers above all else., • Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly., • Teamwork: We work as one across our organization for the benefit of our customers., • Excellence: We strive to be the best, continuously improving our customers’ experience and the solutions we provide., • Sense of Urgency: We respond quickly to customer needs and hold ourselves accountable for results. Ideal candidates will demonstrate the following values: • Acting in a safe manner, • Exhibiting honesty and integrity, • Acting in a fair and ethical manner, • Team mentality, • Delivering quality results, • Embraces change / improvement, • Exhibiting superior customer service skills, • Exhibiting pride and ownership, • Working with a sense of urgency, • Exhibiting a winning attitude What We Offer: Yancey Bros. Co. offers a full benefits package that includes aggressive compensation levels, technician tool allowances, full medical, vision and dental coverage, employee wellness programs, paid vacations and more. Competitive Pay Structure • Competitive Pay based on experience, • Individual Bonus Opportunities Available, • Technician Tool Allowance, • 401k Plan Strong Company Match, • Employee Profit Sharing, • Financial Wellness CoachingEmployee Wellness Program, • Medical, Vision, Dental Insurance, • Prescription Drug Coverage, • Flexible Spending Accounts, • Short & Long Term Disability, • Group Life InsurancePersonal Time Off, • Paid Holidays, • Paid Sick Leave Career Development, • Tuition Reimbursement, • Ongoing Training, • Advancement Opportunities

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As a Heavy Duty Diesel Truck Technician, you will be diagnosing, troubleshooting and repairing diesel engines and components on all makes and models of on-highway diesel trucks and buses. Primary Responsibilities: • Inspect, diagnose, troubleshoot and locate mechanical deficiencies on buses and on-highway diesel truck engines and components., • Repair and/or replace all components of diesel engines, hydraulic systems, air conditioning systems, suspension systems, drive trains, electrical systems, steering, braking, material handling, and operator comfort systems., • Determine extent of necessary repairs including identifying major power-train overhaul needs and prepare orders for required services., • Perform welding and brazing, fabricate and modify parts, equipment, miscellaneous structures and attachments., • Complete all documentation (work orders, parts orders, inspections, warranty support, comments and time sheets) in a legible, accurate and timely manner., • Perform all work in accordance with established time, quality standards and safety procedures.Additional Responsibilities:, • Participate in required safety program, and work in a safe manner., • Additional duties as assigned by manager.Who We Are Looking For: To be successful in this position you should have a strong mechanical aptitude, knowledge of tools applicable to the position and the desire to learn. You should possess a strong sense of urgency and desire to provide superior customer service. The ability to take direction and work in a team environment is essential to this position as well. Education/Experience: • High school diploma or equivalent preferred.Required Qualifications/Skills:, • Knowledge of complex hydraulics, electrical, computer and mechanical systems, arc and oxygen acetylene welding, test equipment used to diagnose and repair equipment and electronic components of vehicles., • Ability to operate a variety of equipment safely to diagnose, adjust and repair malfunctions; follow oral and written instructions; read and understand operators and repair manuals; work cooperatively with others; work with minimal supervision and keep required records., • Ability to read, analyzes, and interpret technical information- schematics, technical manuals, technical drawings, technical procedures, and governmental regulations, • Operate equipment and vehicles with possession of all necessary licenses and certificates., • Skilled in ‘Basic’ computer applications including email and internet usage., • The ability to communicate through email- sending & receiving notes, attachments., • Ability to read, analyzes, and communicate technical information., • Ability to write service reports that effectively communicate required information in an understandable (clear and concise) and useable method., • Ability to ask and properly respond to questions from customers and supervisors. Preferred Qualifications/Skills:, • Course work from accredited trade school, college or university with emphasis in mechanics, hydraulics, and automotive electronics is desirable.Values: At Yancey Bros. Co, we are always looking to add people to our team who share our core values: • Safety: We value the lives and health of our team and customers above all else., • Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly., • Teamwork: We work as one across our organization for the benefit of our customers., • Excellence: We strive to be the best, continuously improving our customers’ experience and the solutions we provide., • Sense of Urgency: We respond quickly to customer needs and hold ourselves accountable for results. Ideal candidates will demonstrate the following values: • Acting in a safe manner, • Exhibiting honesty and integrity, • Acting in a fair and ethical manner, • Team mentality, • Delivering quality results, • Embraces change / improvement, • Exhibiting superior customer service skills, • Exhibiting pride and ownership, • Working with a sense of urgency, • Exhibiting a winning attitude What We Offer: Yancey Rents offers a full benefits package that includes aggressive compensation levels, technician tool allowances, full medical, vision and dental coverage, employee wellness programs, paid vacations and more. Competitive Pay Structure • Competitive Pay, • Individual Bonus Opportunities Available, • Technician Tool Allowance, • 401k Plan Strong Company Match, • Employee Profit Sharing, • Financial Wellness CoachingEmployee Wellness Program, • Medical, Vision, Dental Insurance, • Prescription Drug Coverage, • Flexible Spending Accounts, • Short & Long Term Disability, • Group Life InsurancePersonal Time Off, • Paid Holidays, • Paid Sick Leave Career Development, • Tuition Reimbursement, • Ongoing Training, • Advancement Opportunities #YPS

We are seeking a reliable Shipping & Receiving Operator to support daily warehouse operations. This role involves reviewing shipping orders on a tablet, verifying documentation, picking and pulling products, preparing pallets, and shrink-wrapping materials for outbound shipment. The position is approximately 60% manual labor and 40% forklift operation as needed. Schedule: MondayFriday, 7:00 AM5:30 PM Saturdays: 2 per month, 7:00 AM12:00 PM Pay: $18.75$21.75/hr + OT Key Responsibilities: Accurately pick flooring product orders and place items on pallets Shrink-wrap pallets to ensure safe handling of heavy materials Review shipping orders and verify documentation for accuracy Collect and route outbound freight paperwork Assemble merchandise and prepare orders for shipment Schedule inbound and outbound freight to support warehouse flow Communicate with carriers and provide loading instructions Safely operate forklifts, pallet jacks, and other equipment Maintain a clean, organized work environment Complete equipment checklists and basic preventative maintenance Perform additional duties as assigned Qualifications: High School Diploma or equivalent Minimum 1 year warehouse experience Forklift experience preferred Tablet/iPad proficiency Strong communication and organizational skills Ability to follow instructions and work under pressure

GLOVIS America, Inc. is a third-party logistics provider headquartered in Irvine, CA. Since our inception in 2002, we are committed to delivering our customers products via truck, rail, or ocean vessel throughout the U.S., Canada, and Mexico. Glovis America makes every effort to exceed standards by providing quality service to our customers and vendors of the automotive, freight forwarding, parts distribution, used car, and fuel industries. We cater logistics strategies and processes to our customers' needs by utilizing the latest information systems and advanced technologies. Maneuvering locomotives within the switching yard to assemble and disassemble trains • Moving railcars to designated tracks as per schedule and instructions, • Operating track switches to route trains or individual railcars onto different tracks, • Ensuring that tracks are correctly aligned for the intended movement, • Connecting and disconnecting railcars using mechanical couplings, • Inspecting couplings and ensuring secure connections, • Conducting pre-operational inspections of locomotives and railcars to identify any mechanical issues, • Reporting and addressing any defects or maintenance needs, • Using radios and hand signals to convey information accurately and efficiently, • Adhering to all safety protocols and regulations to prevent accidents and injuries, • Wearing appropriate personal protective equipment (PPE), • Quickly addressing and resolving operational issues that arise during shifts, • Making informed decisions to ensure the smooth and efficient operation of the yard Documenting all movements, switch positions, and any incidents that occur during operations • Keeping logs of inspections and maintenance activities, • Ensuring compliance with environmental and safety regulations Participating in ongoing training programs to stay updated on operational procedures and safety standards • Assisting in the training of new personnel as needed, • Other duties as assigned, • Detail oriented Required, • Safety-conscious Required, • Ability to work outside under various conditions Required, • Discipline to follow processes and procedures in a consistent and safe manner Required, • Experience operating diesel locomotives in a switching yard Required, • High School Diploma/G.E.D. Required, • Bachelor's Degree Preferred, • 1 years of experience in Locomotive Operation Required, • 2 years of experience in Locomotive Operation Preferred, • Must hold a valid state issued Driver's License, • FRA/AAR locomotive operator certification Preferred Glovis America, Inc. adheres to the equal employment opportunity guidelines set forth by federal, state, and local laws. The information requested on this form is sought in good faith and will not be used to discriminate against the applicant based on race, religion or creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic characteristics, marital status, sex or gender (which includes pregnancy, childbirth, or related circumstances), gender identity, gender expression, age, citizenship, sexual orientation, family care or medical leave status, military and veteran status, political affiliation, or any other characteristic protected by federal, state and local laws. • Comfortable working at heights for various installs, • Working at heights - elevated locomotive platforms & autotracks, • Operating heavy machinery - diesel locomotives, • Precise manual dexterity - locomotive controls, • Exposure to change in temperature - work is primarily outside, • Exposure to dust, fumes, gases, chemicals, etc - Diesel exhaust from locomotives, • Drive, • Push/pull, • Bend/stoop, • Kneel, • Squat/crouch, • Stand, • Lift up to 50 lbs., • Carry up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. This position works in a plant manufacturing/warehouse setting. • Comfortable working at heights, specifically at railcars and locomotive heights, • Operate locomotive operation, • Ability to exercise throttle control, • Comfortable working in all weather conditions, • Comfortable working in/around locomotive, • The position is based out of Savannah, GA office at a plant manufacturing/warehousing environment., • Communication with employees and field partners will be primarily conducted via phone and email. The information contained herein is not intended to be an all-inclusive list of duties and responsibilities of the job, nor is it intended to be an all-inclusive list of skills and abilities required to do the job. Glovis America, Inc. reserves the right to alter and change this job description at any time without notice based on business needs.

Hands-on field role troubleshooting and repairing heavy rental equipment across mechanical, electrical, hydraulic, and pneumatic systems. This Jobot Job is hosted by: Travis Bergwall Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $30 - $45 per hour A bit about us: A long-established equipment and power-systems organization serving customers across Georgia with sales, parts, and field service support for construction equipment, on-highway engines, and electric power generation systems. Why join us? Competitive compensation, individual bonus opportunities, technician tool allowance, medical, dental and vision coverage, 401(k) with strong company match, employee profit sharing, paid time off, tuition reimbursement, ongoing training, and advancement opportunities. Job Details Troubleshoot, diagnose, and perform mechanical, electrical, hydraulic, and pneumatic repairs on customer and rental equipment in the field. Inspect equipment, identify deficiencies, use diagnostic tools, source parts, and repair diesel engines, hydraulic systems, air conditioning, suspensions, drivetrains, electrical systems, steering, braking, and operator-comfort systems. Complete work orders accurately, operate service equipment safely, and provide excellent customer service. Candidates should have heavy equipment, automotive, diesel, or on-highway truck experience; their own tools; basic computer skills; a valid driver’s license; and the ability to work independently. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionDescription: Are you tired of feeling like just a number at work? At MainOcean, we believe work should be more than just a job ~ it should feel like a second home. We pride ourselves on offering a family-style environment where every team member is a valued contributor and shares a commitment to excellence. With over 100 years of combined expertise across three generations, our business stands as a cornerstone in logistics and transport throughout the Southeast and Gulf Coast. We excel in providing innovative supply chain solutions through our integrated network of warehouses, ports, and transportation services. Come join our passionate team and experience a dynamic, collaborative environment where your growth and success are at the heart of what we do. About Us: We are proud to be a family-run, regionally focused company led by three generations with more than 100 years of combined logistics, transport and stevedore experience in the Southeast and Gulf Coast. MainOcean Carolinas LLC is a consolidated family of companies providing logistics and supply chain solutions to cargo owners and shippers through the warehouse, port, and transportation industries. Job Purpose: Serve in a key role by performing a wide range of warehouse functions, including the safe and efficient operation of forklifts, inventory management, order picking, material handling, and shipping and receiving activities. This role supports smooth warehouse operations and ensures the timely loading and unloading of customer products. The position will also include responsibilities as a Yard Truck Operator when business needs require. The Yard Truck Operator safely and accurately moves trailers to and from dock doors per instructions from the Supervisor and office staff. This role is responsible for maintaining the organization, cleanliness, and safety of yard and dock areas, as well as ensuring all seals and paperwork are properly handled and processed in accordance with MainOcean Logistics procedures. Duties & Responsibilities: • Operate various types of forklifts, including reach trucks, clamp trucks, standard forklifts., • Safely load and unload materials from trucks and storage areas according to customer’s requirements., • Transport materials throughout the warehouse using forklifts and other heavy equipment., • Assist with shipping and receiving tasks, including checking inventory and verifying orders., • Collaborate with Warehouse Supervisors to ensure efficient warehouse operations., • Organize customer products by type, lot number, or other required classifications., • Perform routine maintenance checks on forklifts and report any issues or malfunctions., • Operate yard lifts and yard trucks in a safe and efficient manner., • Conduct accurate and timely yard checks at designated times., • Set dock for the following day at the end of each shift in accordance with required prioritization., • Prioritize BTC drivers by communicating prior to arrival, facilitating doubles when possible, and verifying empty containers are clean with doors properly secured., • Proactively notify management of all work not expected to be completed within assigned time expectation so corrective action can be taken., • Accurately complete and submit all required documentation for each load and end-of-day reporting, including but not limited to container activity logs, receiving documents, and photos for export crate deliveries., • Maintain an organized, clean, and safe work area free of OSHA violations, including but not limited to assigned truck and apron area., • Efficiently coordinate traffic in the yard when necessary., • Proactively notify management when company property or equipment needs repair or the condition is deteriorating abnormally., • Develop and build professional relationships with customers., • Adhere to safety protocols and maintain a clean and organized work area., • Support continuous improvement by contributing to the ongoing efforts to improve all experiences with MainOcean., • Additional duties as assigned., • Duties and responsibilities may change, and new ones may be added, at any time with or without advanced notice.Requirements: Skills and Qualifications: • High school diploma or equivalent required., • Forklift operator certified with proficient skill in the safe operation of forklift, yard lifts, and yard trucks., • Current valid driver’s license and clean driving record., • 1+ year of experience warehouse related experience with a successful track record of safety and accuracy., • Able to read, write, and communicate in verbal and written English fluently., • Able to work with initiative and minimal supervision and is goal oriented., • Computer and tablet literate along with working knowledge of camera use in order to take pictures of cargo., • Strong business math skills., • Able to read, interpret, and apply information from office documents., • Able to effectively communicate regarding completed work and accurately ascertain estimated time to completion of outstanding work., • Able to build strong relationships with intra-company employees and drivers., • Able to multi-task and manage multiple priorities., • Excellent attention to detail., • Excellent organizational, task and time management skills. Working Conditions: • The worker is subject to outside environmental conditions: No effective protection from weather., • The worker is subject to extreme heat: Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions such as wind and humidity., • The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level., • The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals., • The worker is subject to atmospheric conditions: One or more of the following conditions that affect the respiratory system of the skin: Fumes, odors, dusts, mists, gases or poor ventilation., • The worker is required to function in narrow aisles, passageways, or small spaces: Includes spaces such as loaded cargo containers and warehouse aisles., • The worker is subject to heights: The worker frequently is required to utilize ladders and lifts to reach high objects in a warehouse environment that may be stored tens of feet off of the ground. Physical Requirements: • Medium work: Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects., • Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms. Body agility is emphasized. This factor is important if the amount and kind of climbing required exceeds that required for ordinary locomotion., • Stooping: Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles., • Crouching: Bending the body downward and forward by bending leg and spine., • Reaching: Extending hand(s) and arm(s) in any direction., • Standing: Remaining upright on the feet, particularly for sustained periods of time., • Sitting: Be in a seated position for an extended period of time., • Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another., • Pushing: Using upper extremities to press against something with steady force in order to thrust forward, downward or outward., • Pulling: Using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion., • Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position to-position. This factor is important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles., • Fingering: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling., • Grasping: Applying pressure to an object with the fingers and palm., • Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips., • Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly, • Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction and having the ability to receive detailed information through oral communication and making fine discriminations in sound., • Seeing: Clarity of vision at near and far distances, depth perception, and able to work in low light environments., • Smelling: Able to detect or perceive odors. Direct Reports: • None. Acknowledgements MainOcean Carolinas LLC provides equal employment opportunities to all applicants and employees and strictly prohibits any type of harassment or discrimination in regard to race, religion, age, color, sex, disability status, national origin, genetics, sexual orientation, protected veteran status, gender expression, gender identity, or any other characteristic protected under federal, state, and/or local laws. Consistent with the Americans with Disabilities Act (ADA), it is the policy of MainOcean Carolinas LLC to provide reasonable accommodation when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact Human Resources - hr@mainocean.com. All employment with MainOcean Carolinas LLC is on an at-will basis.

Job DescriptionJob SummaryWe are seeking a Forklift Operator to join our team. In this role, you will transport packages and materials throughout the facility. This position requires a dedication to safety and careful driving practices. Ultimately, the goal of this position is to maximize efficiency by ensuring that materials and products are always in the right location at the right time. The ideal candidate has a proven track record as a Forklift Operator and an excellent safety record. Se solicita 2 forklift drivers con licencia valida para conducir este tipo de maquinas. Personal flexible con ganas de apoyar en diferentes tareas del almacen. Responsibilities • Unload products from incoming trucks and relocate them to the appropriate places, • Move pallets and crates from one location to another, • Monitor products for damages, shortages, or quality control issues and report on those issues, • Perform regular inspections and maintenance of machinery to ensure optimal operation, • Maintain accurate inventory records and activity logs, • Adhere to all health and safety regulations, legal guidelines, and company policies, • Assist in maintaining a safe and organized work environmentQualifications, • Previous experience as a Forklift Operator is preferred, • We only hire individuals who are legally authorized to work in the United States., • Valid forklift certification, • Familiarity with and ability to use industrial equipment, • Strong attention to detail, • Ability to meet the physical demands of the job, including lifting heavy objects, • Excellent hand-eye coordination

Job DescriptionDescription: JOB OVERVIEW: We are seeking a dependable and safety-conscious Siloadmax / Top Lift Operator to join our team at our Stack Yard. This dual-role position is responsible for operating specialized equipment to load bulk products into containers and handling container movement within the yard. KEY RESPONSIBILITIES: Siloadmax Duties: • Install bladders into 20-ft containers for bulk loading., • Operate the Siloadmax system, including attaching the bladder spout and starting product flow., • Monitor gauges and instruments to regulate the loading process., • Seal containers once filling is complete., • Maintain associated equipment such as air compressors and generators. Top Lift Duties: • Operate a Taylor Top Lift to move containers on and off chassis., • Maintain yard organization by strategically placing and stacking containers., • Perform regular cleaning and upkeep of the yard area., • Conduct routine checks and maintenance on top lift equipment. Requirements: MINIMUM WORK EXPERIENCE: • Experience in driving heavy equipment is a must., • Previous forklift experience PREFERRED EDUCATION • High School Diploma SPECIFIC KNOWLEDGE & SKILLS: • Strong attention to detail and ability to follow procedures, • Comfortable working indoors and outdoors in various weather conditions, • Ability to lift up to 50 lbs and work on your feet for extended periods, • Basic computer or scanner skills for inventory management WORK ENVIRONMENT: Work is generally performed in a warehouse environment. The noise level is moderate. Generally, well ventilated, and well lit. Warehouse team members may be required to wear protective clothing. Additionally, may operate heavy equipment and strict safety regulations may be required. PHYSICAL EFFORT: Work is physically strenuous, and team members are required to lift heavy packages up to 50 pounds. Work may require excessive bending or stooping. Team members may be required to climb ladders, use hand tools, and/or use heavy machinery (e.g., forklift, etc.). The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Light duty options may be available. Port City Logistics is an Equal Employment Opportunity Employer and does not discriminate against applicants or employees on the basis of race, color, religion, creed, national origin, ancestry, disability that can be reasonably accommodated without undue hardship, sex, sexual orientation, gender identity, age, citizenship, marital or veteran status, or any other legally protected status.

Job Description Who We Are: Porter Logistics is a fast-growing third-party logistics (3PL) provider redefining modern warehousing and fulfillment. Headquartered in Atlanta, we’ve scaled over the past decade from a two-person operation in 10,000 square feet to more than 1 million square feet across multiple Georgia facilities, supporting high-volume, high-expectation customers across a range of industries. We’re excited to be expanding into Savannah, marking our first facility in the market. This new location represents a major milestone for Porter Logistics and offers a unique opportunity to help launch, shape, and grow operations from the ground up while being supported by an established, Atlanta-based organization. This is a tight-knit team where leaders know you by name, your work creates visible impact every single day, and hard work gets rewarded with real opportunities. If you're energized by challenge, want limitless growth potential, and thrive in a fast-paced environment where no two days are the same, keep reading. The Role: As a Forklift Operator, you're the engine that powers everything we do. You'll safely operate multiple types of equipment (sit-down, stand-up, cherry picker, reach) while loading, unloading, sorting, staging, and transporting products through our fast-moving operation. This isn't a clock-in, clock-out job. You'll be a problem-solver who takes ownership, adapts on the fly, and keeps our operation running smoothly when things get dynamic. If you take pride in precision, thrive under pressure, and want your expertise to actually matter, this is your opportunity. What You'll Earn: • $20-22/hour based on experience, • Competitive medical, dental, and vision plans, • Paid time off and company holidays, • Overtime opportunities You'll Thrive Here If You: • Roll up your sleeves and stay hands-on when things get messy, • Run toward challenges instead of away from them, • Want to grow your career with a company that promotes from within, • Value being part of a small, high-energy team where everyone matters This Might Not Be For You If: • You're looking for predictable, repetitive days, • You prefer a big corporate environment with layers of bureaucracy, • You're watching the clock instead of the workWhat You'll Be Responsible For:, • Unload palletized products from containers and trailers using forklifts and other material handling equipment., • Transport and put away product into assigned warehouse storage locations, ensuring proper placement and organization., • Retrieve and pick orders accurately from warehouse storage locations based on pick lists and customer requirements., • Safely load palletized product onto trailers and containers for outbound shipments., • Perform daily inspections and basic maintenance of forklifts to ensure safe operation., • Follow all company policies, standard operating procedures, and safety regulations to uphold a safe and compliant work environment., • Identify and report any product damage, equipment issues, or process concerns promptly. What We're Looking For: • Proven experience as a forklift driver, preferably in a 3PL or logistics environment., • 2+ years of experience operating a forklift., • Familiarity with palletized handling and transport., • Knowledge of warehouse safety practices and procedures., • Ability to operate forklifts and other warehouse machinery safely and efficiently., • Experience with RF scanning devices for inventory tracking and management, • Strong attention to detail and accuracy., • Physical ability to lift and move heavy objects (up to 50 lbs)., • Excellent communication and teamwork skills., • Ability to work in a fast-paced environment while meeting safety and quality expectations The Hiring Process: We value your time and are committed to a streamlined, respectful hiring experience. Candidates selected for further consideration will begin with a brief phone screen with a member of our HR team. If mutual interest is confirmed, you’ll be invited for an in-person interview at our warehouse to meet the team and tour the facility. Powered by JazzHR sqAhselF8p

Traveling Heavy Equipment Operators Wanted. Looking for Traveling Heavy Equipment Operators with paid Per Diem, working throughout Georgia, South Carolina, North Carolina, Tennessee and the Florida Panhandle*. We are looking for experienced Heavy Equipment Operators that are willing to travel thro

Our heavy equipment operators take their careers to the next level by working on equipment that requires a high level of skill and determination. Are you looking for stable work as a Heavy Equipment Operator II with benefits that provide financial security for you and your family? Aspiring to advan

The primary responsibility of the Crane Operator is to safely and efficiently load and unload cargo from vessels. This position also performs highly skilled work involving the operation and general maintenance of a variety of heavy equipment used in maritime and terminal operations. The Crane Operator must be qualified to operate various types of equipment, including cranes, container handlers/stackers, yard hustlers, forklifts, farm equipment, heavy industrial and construction equipment, and tractor-trailers. This position requires a high level of skill in the safe and efficient operation of large and heavy equipment and a thorough understanding of vessel, terminal, and cargo-handling operations. Essential duties and responsibilities include: • Safely and efficiently operate gantry cranes, container handlers, forklifts, yard hustlers, and other vessel and terminal support equipment., • Load, unload, move, stack, and position cargo in accordance with established operating and safety procedures., • Perform preventive maintenance, corrosion control, corrective maintenance, and minor repairs on assigned equipment, as appropriate., • Complete required daily, monthly, and annual equipment and safety inspections; accurately document results in applicable equipment or machinery logs and assist with corrective actions as needed., • Maintain qualification and proficiency in vessel operations, terminal support, and warehouse support equipment as required., • Participate in the training of support personnel, including flagmen, oilers, yard personnel, and new equipment operators., • Maintain proficiency standards established by management and participate in operator proficiency evaluations as required., • Demonstrate thorough knowledge of the proper care, operation, and safe use of light and heavy equipment used in maritime operations., • Understand and comply with applicable laws, regulations, safety standards, company policies, and operating procedures., • Know and correctly use standard hand signals required for crane operations and ensure compliance with established signaling procedures., • Maintain awareness of surrounding personnel, equipment, cargo, and changing conditions to ensure safe operations., • Perform additional duties as assigned. Position requirements include: • Previous crane operating experience required., • Previous experience in the stevedoring or maritime industry preferred., • High school diploma or equivalent required., • Forklift certification required., • Valid Transportation Worker Identification Credential (TWIC) required., • Ability to understand and correctly interpret equipment load charts., • Ability to recognize and respond appropriately to changing conditions that may affect the safe operation of a crane or other equipment., • Ability to pick, carry, swing, position, and place loads smoothly, accurately, and safely., • Strong mechanical aptitude, problem-solving ability, and sound judgment., • Ability to communicate effectively with supervisors, team members, and support personnel using radio communication, verbal instructions, and/or standard hand signals., • Ability to work effectively as part of a team and provide leadership or direction when required., • Strong organizational and time-management skills., • Resourceful, dependable, and able to manage multiple responsibilities., • Ability to communicate and work effectively with individuals from diverse backgrounds and roles., • Ability to work overtime, including weekdays, weekends, holidays, and varying shifts as operational needs require., • Ability to successfully complete all required pre-employment and/or ongoing screening requirements, including drug screening, physical examination, and background check. Required operational knowledge includes: • Equipment and workplace safety procedures, • Truck and equipment inspections, • Storage and exchange points, • Counterbalance principles, • Stability triangle, • Center of gravity, • Equipment terminology, • Attachments and load centers, • Battery inspection, • Material-handling procedures, • Loading and de-stacking, • Unloading and stacking, • Counterbalance equipment operation, • Traveling on ramps and within trailers, • Equipment parking and securing procedures Competencies include: Verbal and Written Comprehension Ability to understand and follow oral and written instructions, including general, technical, and safety-related communications. Communication Skills Ability to communicate clearly and effectively and provide accurate instructions and directions. Reasoning and Problem Solving Ability to identify operational issues, troubleshoot problems, assess changing conditions, and determine appropriate courses of action. Time Management and Organization Ability to effectively manage time, prioritize responsibilities, and handle a broad range of activities in a fast-paced operational environment. Safety Awareness Demonstrates consistent awareness of workplace hazards and follows established safety procedures, regulations, and operating practices. Teamwork and Leadership Works effectively with others and demonstrates the ability to provide guidance, instruction, and leadership when necessary. Physical demands and work environment include: While performing the duties of this position, the employee is regularly required to stand, walk, use hands to handle or operate equipment and controls, and reach with hands and arms. The position may require climbing, bending, stooping, and working at varying heights. The employee must be able to lift, carry, push, pull, and/or move up to 50 pounds unassisted. The work environment includes hazards and conditions typical of maritime, terminal, and heavy-equipment operations, including exposure to moving machinery, heavy equipment, elevated work areas, cargo-handling operations, chemicals, and other industrial hazards. Employees may be exposed to varying and potentially extreme weather conditions, temperatures, ventilation, lighting, noise levels, and other environmental conditions. Appropriate personal protective equipment (PPE) must be worn as required. The employee must be able to safely perform the essential functions of the position with or without reasonable accommodation.

Job Description Dredgit Corporation is seeking an experienced Dump Truck Operator to haul borrow and fill material in support of a dike-raising project at the Jones Oyster Bed Island Dredged Material Containment Area (DMCA) in Jasper County, SC. This role is responsible for safely operating an articulated or rigid-frame dump truck over soft, saturated, and often temporary haul roads along the dike alignment, loading and dumping material as directed to keep the dike-raising work on schedule. This is physically demanding, outdoor work performed on a remote barrier island site with tidally influenced conditions. Minimum Qualifications • Minimum 5 years of verifiable experience operating off-road/articulated dump trucks (ADTs) or heavy rigid-frame haul trucks on heavy civil, dredging, or marine/wetland construction projects, • Prior experience hauling on dike/levee raising, dredged material containment area (DMCA) construction, or similar marsh/wetland island earthwork strongly preferred, • Experience operating on soft, unstable, or saturated haul roads and temporary marsh access routes, • Comfortable working on a remote island site accessed by barge or boat, with limited land-based access, • Valid driver's license (CDL preferred, depending on truck classification and any public-road travel requirements), • Ability to pass a pre-employment and random drug/alcohol screening, • OSHA 10-Hour construction certification required; OSHA 30-Hour preferred, • Ability to read and follow haul route plans and direction from spotters/ground personnel, • Physical ability to climb in and out of equipment, work outdoors in all weather conditions (including coastal SC heat/humidity), and perform pre/post-shift inspections Skills Required • Skilled, controlled operation of articulated/rigid-frame haul trucks on soft, wet, and uneven marsh terrain, • Ability to safely load, haul, and dump borrow/fill material along a linear dike alignment with excavators and dozers working nearby, • Strong awareness of truck payload limits, ground conditions, and load stability to avoid rollovers or becoming stuck, • Ability to back into and position at loading/dumping points precisely and safely under operator/spotter direction, • Understanding of basic haul road maintenance needs (ruts, soft spots, standing water, tidal effects) and ability to report conditions, • Strong situational awareness around other heavy equipment, ground personnel, and marsh/waterfront hazards, • Ability to perform routine equipment maintenance checks (fluids, tires, hydraulics) and report mechanical issues, • Effective communication with loaders, spotters, and other operators via radio/hand signals Key Responsibilities • Haul borrow material, fill, and armor stone between borrow/loading points and the dike-raising work area, • Position truck accurately and safely at excavator loading points and designated dumping/placement locations along the dike, • Operate safely over soft, saturated, and temporary haul roads, adjusting speed and route to changing ground and tidal conditions, • Monitor and report haul road deterioration (ruts, soft spots, ponding) to the superintendent/foreman for maintenance, • Coordinate with excavator and dozer operators to maintain continuous, efficient material flow along the dike alignment, • Conduct daily pre- and post-operation equipment inspections; complete inspection checklists and report defects immediately, • Follow all site-specific safety plans, including haul road traffic control, equipment travel over soft ground, and tidal/marine safety protocols, • Attend and participate in daily safety briefings/tailgate talks and toolbox meetings, • Maintain awareness of survey control points, existing dike infrastructure, and environmentally sensitive areas (oyster beds, marsh habitat), • Perform other equipment operation and general labor duties as assigned in support of the dike-raising project \nCompany Description Founded in 2011, Dredgit® Corporation is a family-owned, self-perform specialty contractor based in Houston, Texas. We provide critical infrastructure maintenance services through four operating divisions: Marine, Environmental, Civil and Industrial. Over the past 11 years, we have safely executed a variety of challenging projects in some tough environments. Our customers include the U.S. Army Corps of Engineers, U.S. Coast Guard, state/local governments, and large, well-known industrial companies in the pulp and paper, petrochemical, refining, liquified natural gas, and power generation industries. Founded in 2011, Dredgit® Corporation is a family-owned, self-perform specialty contractor based in Houston, Texas. We provide critical infrastructure maintenance services through four operating divisions: Marine, Environmental, Civil and Industrial.\r\n\r\nOver the past 11 years, we have safely executed a variety of challenging projects in some tough environments. Our customers include the U.S. Army Corps of Engineers, U.S. Coast Guard, state/local governments, and large, well-known industrial companies in the pulp and paper, petrochemical, refining, liquified natural gas, and power generation industries.

Job Description Job Overview: Terminal Operator (Wood Pellet Rail Receiving) The primary duties of employee shall be to safely operate and maintain all related wood pellet handling equipment and conduct himself or herself in a professional manner at all times. This shall include specifically receiving and discharging arriving rail cars via bottom dump hopper cars and safely and efficiently storing the wood pellets in the appropriate Dome Silo location. Employee shall also be responsible for reclaiming wood pellets from the Dome Silo location and loading Shipper nominated vessels per the terms and conditions of the related agreements between parties. Job Description: Employee will have multiple tasks including but not limited to the following: · Communication with railroads for spotting cars on track and placing cars over the rail pit · All aspects of unloading cars including venting hatches, inspecting cargo, opening gates, quality control PLC monitoring and progressing cars · Operate track mobile rail car handling equipment for industrial switching operations per training. · Employee shall continuously monitor PLC for proper operation of all aspects of pit, belt conveyors, dust collection systems, and environmental control systems. · Employs must at all times monitor incoming product for proper Temperature and Moisture monitoring · Employee will operate equipment such as front end loader during outbound shipments to unload the domes. · Employee will be trained in all aspects of shipping · Employee will run/ train on ship loader and all aspects to load ship fully and correctly. · Employee will communicate with shift supervision or facility manager with all operational and safety protocol. · Employee will be responsible for up keep and cleanliness of facility* Job requirements and pre-requisites: · High School Diploma (Military experience is not included) · Ability to qualify for a US Department of Homeland Security Transportation Worker Identification Credential (TWIC card). · Pre-employment drug screening · Pre-employment physical (including but not limited to lung capacity test) · Pass Background Check · Physically fit (able to climb steps and ladders frequently) and to work in tight spaces · Experience running heavy equipment (e.g. Front End Loaders) · Computer literate – MS Outlook or similar, MS Excel, MS Word · Highly motivated · Flexible schedule (weekend work, night shift on revolving basis) · Ability to work at heights above 100 feet · High mechanical aptitude · Ability to work with others in a cooperative and professional manner Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities. Duties may change at any time with or without notice.

Job Description NIGHT SHIFT DUMP TRUCK DRIVER CDL B DRIVER / AUTOMATED LOADOUT OPERATOR Department: Transload Operations Shift: Night Shift Classification: Full-Time / Safety-Sensitive Reports To: Operations Manager / Shift Leadership Position Summary The Night Shift Dump Truck Driver / Automated Loadout Operator is a blended position responsible for safely operating a commercial dump truck and independently loading material through AMW's automated loadout system. The driver will use a tablet to select and confirm load information, position the truck, operate the loading controls, verify weights, complete required documentation, and transport material as assigned. Because this role works primarily at night with limited direct supervision, the successful candidate must be dependable, self-motivated, safety-focused, and able to recognize and communicate problems before they affect employees, equipment, product quality, customers, or delivery schedules. Key Responsibilities Commercial Driving and Delivery · Safely operate a dump truck and related commercial equipment in compliance with company policy and all applicable DOT, state, and local requirements. · Perform assigned nighttime material movements and deliveries while following approved routes, schedules, site rules, and customer instructions. · Complete thorough pre-trip and post-trip inspections and promptly report defects, damage, maintenance concerns, incidents, or unsafe conditions. · Maintain legal axle and gross vehicle weights and ensure the load is properly distributed, contained, and secure before travel. Automated Self-Loading Operations · Use a company-provided tablet and automated loading system to select the correct order, customer, material, destination, and target weight before loading. · Confirm the truck is correctly positioned and that the loading area is clear before initiating the load cycle. · Monitor the entire load cycle, verify displayed weights and alarms, and stop the process immediately if an unsafe condition, wrong product, equipment issue, or abnormal reading is observed. · Follow approved procedures for load verification, scale tickets, load adjustments, and system shutdown. Never bypass safeguards or attempt repairs outside authorized training. Documentation and Communication · Accurately complete electronic and paper load records, inspection reports, delivery tickets, fuel records, and other required documentation. · Maintain timely communication with operations leadership regarding completed loads, delays, product or weight discrepancies, equipment alarms, breakdowns, customer concerns, and emergencies. · Protect customer, shipment, and company information and ensure each load is matched to the correct documentation before departure. Night Shift Ownership · Work independently and remain productive with limited supervision while following established priorities and procedures. · Plan work to meet loading and delivery expectations without sacrificing safety, accuracy, equipment care, or product integrity. · Maintain the truck cab, dump body, loadout area, and assigned workspaces in a clean and orderly condition. · Support other terminal duties within training and qualification when operational needs require. Required Qualifications · Valid Class B Commercial Driver's License (CDL B) with an acceptable driving record. · Ability to meet all applicable DOT driver qualification, medical certification, and drug/alcohol testing requirements. · Demonstrated experience safely operating dump trucks, tractor-trailers, or comparable heavy commercial vehicles. · Ability and willingness to work a night-shift schedule, including overtime, weekends, or holidays when business needs require. · Comfort using a tablet, touchscreen controls, electronic forms, and basic automated equipment interfaces. · Ability to read and follow load instructions, safety procedures, warning messages, delivery documents, and posted signage. · Reliable attendance, sound judgment, and the ability to work independently in a safety-sensitive environment. Preferred Qualifications · Two or more years of commercial driving experience, preferably involving dump trailers, bulk materials, terminals, ports, warehouses, construction, or industrial facilities. · Experience with automated loadout systems, truck scales, electronic logging devices, or transportation management applications. · Basic mechanical awareness and experience recognizing abnormal equipment sounds, alarms, leaks, or operating conditions. Core Competencies · Safety ownership and rule compliance · Self-motivation and personal accountability · Attention to load, product, and documentation accuracy · Dependability and time management · Clear communication and timely escalation · Good judgment under limited supervision Physical and Work Environment Requirements · Regularly enter and exit commercial vehicles, climb steps and ladders, bend, reach, and perform vehicle and load inspections. · Work outdoors and in industrial areas during nighttime hours in heat, cold, rain, dust, noise, and changing weather conditions. · Maintain the visual, hearing, physical, and cognitive ability required to safely operate a commercial motor vehicle and automated loading equipment. · Wear required personal protective equipment and comply with all AMW, customer-site, and regulatory safety requirements. Performance Expectations Success in this role is measured by safe driving, accurate self-loading, on-time completion of assignments, complete documentation, proper equipment care, reliable attendance, and prompt communication when conditions require assistance or escalation. Equal Opportunity Statement Atlantic Marine Warehouse is an equal opportunity employer. Employment decisions are made without regard to any status protected by applicable law. Reasonable accommodations may be provided to qualified individuals with disabilities in accordance with applicable law.

Job Description We’re seeking an experienced Heavy Civil Earthwork Superintendent to lead field operations for a dike-raising project at the Jones Oyster Bed Island Dredged Material Containment Area in Jasper County, SC. In this hands-on field leadership role, you’ll direct earthmoving crews and equipment across a remote marsh island site with soft, saturated, and tidally influenced ground conditions. This is not an office-based project management position. You will work directly in the field, managing daily excavation, hauling, grading, and material placement operations. Responsibilities: • Direct excavator, dozer, and dump truck crews completing borrow excavation, material hauling, lift placement, grading, and slope shaping., • Plan daily earthwork activities to meet production goals, cut/fill requirements, and project specifications., • Coordinate with survey and QA/QC teams to verify lift thickness, compaction, elevation, crest width, and slope., • Monitor haul roads and equipment routes across soft marsh ground, directing maintenance and repairs as needed., • Manage equipment assignments, operator performance, production rates, and field logistics., • Enforce safety procedures related to heavy equipment traffic, spotters, tidal conditions, and marine hazards., • Track daily quantities, delays, equipment issues, and project progress., • Coordinate barge, boat, equipment, and material deliveries to maintain production. Requirements: • Minimum 5 years of field experience as an Earthwork Superintendent, Grading Superintendent, or Dirt Work Superintendent., • Direct supervisory experience with excavator, dozer, and dump truck crews on heavy civil projects., • Experience with dike or levee construction, dredging support, DMCA/DMPA projects, or comparable earthwork strongly preferred., • Knowledge of borrow excavation, lift construction, compaction, crest widening, slope shaping, and drainage., • Ability to read grading plans, cross-sections, survey controls, and construction drawings., • Experience managing soft-ground, wet-weather, or tidally influenced working conditions., • OSHA 30-Hour Construction certification required., • Ability to obtain and maintain a TWIC card and pass required drug and alcohol screenings., • Valid driver’s license and ability to travel or relocate near the project for the duration of the assignment., • Comfortable working on a remote island accessed by boat or barge. We Offer: • A key field leadership role on a specialized heavy civil marine construction project., • The authority to direct daily crews, equipment, and earthwork production., • Work involving large-scale excavation, grading, dike construction, and marine logistics., • The opportunity to apply your field experience in a challenging, technically complex environment., • Additional compensation and project benefits based on company policy and experience. Apply today! \nCompany Description Founded in 2011, Dredgit® Corporation is a family-owned, self-perform specialty contractor based in Houston, Texas. We provide critical infrastructure maintenance services through four operating divisions: Marine, Environmental, Civil and Industrial. Over the past 11 years, we have safely executed a variety of challenging projects in some tough environments. Our customers include the U.S. Army Corps of Engineers, U.S. Coast Guard, state/local governments, and large, well-known industrial companies in the pulp and paper, petrochemical, refining, liquified natural gas, and power generation industries. Founded in 2011, Dredgit® Corporation is a family-owned, self-perform specialty contractor based in Houston, Texas. We provide critical infrastructure maintenance services through four operating divisions: Marine, Environmental, Civil and Industrial.\r\n\r\nOver the past 11 years, we have safely executed a variety of challenging projects in some tough environments. Our customers include the U.S. Army Corps of Engineers, U.S. Coast Guard, state/local governments, and large, well-known industrial companies in the pulp and paper, petrochemical, refining, liquified natural gas, and power generation industries.

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: As a Rental Field Service Technician, you will be troubleshooting, diagnosing, and performing standard mechanical, electrical, hydraulic, and pneumatic repairs on customer and Yancey’s rental equipment in the field. Candidates must furnish their own tools, be able to operate industry associated heavy equipment, and complete all assigned work in an accurate and timely manner. Primary Responsibilities: • Inspect, diagnose, troubleshoot, and locate mechanical deficiencies on Heavy Equipment., • Source and order parts as needed., • Proper use of diagnostic equipment., • Repair and/or replace all components of diesel engines hydraulic systems, air conditioning systems, suspension systems, drive trains, electrical systems, steering, braking, material handling, and operator comfort systems., • Perform welding and brazing, fabricate and modify parts, equipment, miscellaneous structures and attachments., • Complete all work orders (including warranty information) and time sheets in a legible, accurate, and timely manner., • Operate equipment and vehicles with possession of all necessary licenses and certificates., • Perform all work in accordance with established quality standards and safety procedures., • Must work overtime on short notice., • Maintain service vehicle inspection records, daily inspections and driver logs as required by the Department of Transportation., • Must keep truck and equipment clean and presenting the best impression possible to the public., • Photograph equipment when necessary., • Must be able to obtain a CDL license if required.Additional Responsibilities:, • Participate in required safety program, and work in a safe manner., • Maintain safe driving record., • Additional duties as assigned by manager.Who We Are Looking For: To be successful in this position you should have a strong mechanical aptitude, knowledge of tools applicable to the position, and the desire to learn. You should possess a strong sense of urgency and desire to provide superior customer service. The ability to take direction and work with minimal supervision is required for this position as well. Education/Experience: • High school diploma or equivalent preferred.Required Qualifications/Skills:, • Minimum of 5 years of relevant experience, • Strong troubleshooting skills., • Knowledge of complex hydraulics, electrical, computer and mechanical systems, arc and oxygen acetylene welding, test equipment used to diagnose and repair equipment and electronic components of vehicles., • Ability to operate a variety of equipment safely to diagnose, adjust, and repair malfunctions; follow oral and written instructions; read and understand operators and repair manuals; work cooperatively with others; work with minimal supervision and keep all required records., • Ability to read, analyze, and interpret technical information from schematics, technical manuals, technical drawings, technical procedures, and governmental regulations., • Basic computer skills (Windows based programs and email)., • Possess and maintain an acceptable driving record according to company standards., • Skilled in basic computer application programs Preferred Qualifications/Skills: • Course work from accredited trade school, college or university with emphasis in mechanics, hydraulics, and automotive electronics is desirable.Values: At Yancey Bros. Co, we are always looking to add people to our team who share our core values: • Safety: We value the lives and health of our team and customers above all else., • Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly., • Teamwork: We work as one across our organization for the benefit of our customers., • Excellence: We strive to be the best, continuously improving our customers’ experience and the solutions we provide., • Sense of Urgency: We respond quickly to customer needs and hold ourselves accountable for results. Ideal candidates will demonstrate the following values: • Acting in a safe manner, • Exhibiting honesty and integrity, • Acting in a fair and ethical manner, • Team mentality, • Delivering quality results, • Embraces change / improvement, • Exhibiting superior customer service skills, • Exhibiting pride and ownership, • Working with a sense of urgency, • Exhibiting a winning attitude What We Offer: Yancey Bros Co offers a full benefits package that includes aggressive compensation levels, technician tool allowances, full medical, vision and dental coverage, employee wellness programs, paid vacations and more. Competitive Pay Structure • Competitive Pay, • Individual Bonus Opportunities Available, • Technician Tool Allowance, • 401k Plan Strong Company Match, • Employee Profit Sharing, • Financial Wellness CoachingEmployee Wellness Program, • Medical, Vision, Dental Insurance, • Prescription Drug Coverage, • Flexible Spending Accounts, • Short & Long Term Disability, • Group Life InsurancePersonal Time Off, • Paid Holidays, • Paid Sick Leave Career Development, • Tuition Reimbursement, • Ongoing Training, • Advancement Opportunities

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

FedEx - - Responsibilities: Operate equipment safely to move packages and freight; Assist in pallet buildup and breakdown for heavyweight freight; Liaise with ULD repair vendor as needed; Perform other duties as assigned.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Nesco Resource - - Responsibilities: Handle and maintain flow of materials in manufacturing areas; Operate motorized and non-motorized material handling equipment; Work under direct supervision; Adhere to established guidelines.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Abacus Corporation - - Responsibilities: Operate forklift to move, load, unload, and stage palletized products; Perform daily equipment inspections and report maintenance issues; Maintain inventory accuracy using warehouse management system; Assist with order picking, replenishment, and shipping/re

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

ProLogistix - - Responsibilities: Safely operate sit-down forklifts and reach trucks; Load, unload, and move materials throughout the warehouse; Support shipping, receiving, and inventory functions; Use RF scanners to pull, stage, and verify orders; Maintain a clean and organized work area.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Nestle - - Responsibilities: Dispenses raw materials according to specifications; Verifies labels against batch records; Documents dispensing per formulas and SOPs; Loads and unloads raw materials; Maintains accurate records and inventory.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Abacus Corporation - - Responsibilities: Operate slip-sheet forklift to move, load, unload pallets; Load/unload trailers and stage products; Transport materials per warehouse procedures; Perform daily equipment inspections and report issues; Maintain inventory accuracy using WMS.

Yancey Bros - - Responsibilities: Pull stock orders for customers and technicians; Perform daily cycle counts before receiving stock or billing; Bin locate items and prepare stock for transfers; Deliver parts to customers and other Yancey stores; Maintain a clean, safe, organized warehouse.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th