Trabajos junior software engineer en San Antonio, TexasCrear alertas

Job Description Position Summary We are seeking a highly experienced and knowledgeable Subject Matter Expert (SME) in Wastewater Treatment to support capital projects, research, and brewery operations in the area of industrial wastewater treatment systems. The SME will provide expert-level guidance, strategic planning, process optimization, and innovative solutions for the design, operation, and improvement of wastewater treatment facilities. Responsibilities • Provide technical leadership in wastewater treatment process design, optimization, and troubleshooting., • Develop and review engineering designs, reports, and technical documents., • Serve as the lead expert on regulatory compliance with local, state, and federal environmental standards., • Evaluate and recommend advanced treatment technologies, including biological, chemical, and physical processes., • Support financial development and project planning by offering technical insights and feasibility assessments., • Mentor junior engineers and technical staff., • Engage in client meetings, site visits, and inspections as needed., • Present findings and recommendations to stakeholders, regulators, and senior management., • Stay current with industry trends, emerging technologies, and regulatory changes. Qualifications • Bachelor’s degree in Environmental Engineering, Chemical Engineering, Civil Engineering, or related field (Master’s or Ph.D. preferred)., • 12-15 years of hands-on experience in wastewater treatment., • Proven expertise in process design, plant operation, and/or consulting services., • In-depth understanding of conventional and advanced wastewater treatment technologies., • Familiarity with modeling software and SCADA systems., • Knowledge of both US and Mexican safety and environmental standards., • Professional Engineer (PE) license preferred., • Relevant wastewater operator certifications a plus., • Excellent attention to detail on multiple simultaneous tasks, • Excellent verbal presentation skills. Excellent written communications skills and ability to document system procedures in an understandable format, • Strong analytical and problem-solving skills., • Excellent communication and presentation abilities., • Ability to manage multiple projects and deadlines., • Strong leadership and mentoring capabilities., • Strong interpersonal skills, • Willing to travel for extended periods of time, • Passport and ability to travel throughout the US and Mexico is required, • Bilingual (English/Spanish) highly desired Physical Requirements/Other • Must be able sit and/or stand for long periods of time, and work on a computer for extended periods. Location San Antonio, Texas Additional Locations Job Type Full time Job Area Operations and Production The salary range for this role is: $121,600.00 - $194,200.00 This is the lowest to highest salary we in good faith believe we would pay for this role at the time of this posting. Our compensation is based on cost of labor. For remote locations or positions open to multiple locations, the pay range may reflect several US geographic markets, including the lowest geographic market minimum to the highest geographic market maximum. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the salary range will be based on several factors including, but not limited to, the prevailing minimum wage for the location, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, shift, travel requirements, sales or revenue-based metrics, any collective bargaining agreements, and business or organizational needs. At Constellation Brands, it is not typical for an individual to be hired at the high end of the range for their role, and compensation decisions are dependent upon the facts and circumstances of each position and candidate. We offer comprehensive package of benefits including paid time off, medical/dental/vision insurance, 401(k), and any other benefits to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, or any other form of compensation that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company’s sole discretion, consistent with the law. Equal Opportunity Constellation Brands is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with Constellation Brands, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin or citizenship, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations).

Our Company Lancer Worldwide, a Hoshizaki Company, is an award-winning global leader in beverage dispensing. Through innovation and a commitment to dedication in action, we create products that benefit our customers worldwide, and give them a distinct advantage in the marketplace. We offer our teammates the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We welcome talented, passionate, and highly motivated individuals to join our team. Summary The Senior Engineer, Test & Automation supports the testing and validation of products and services provided by the company. This role serves as a technical expert on product validation and leads projects of high technical complexity. The ideal candidate will have a strong background in schematic design, test plan and cases development, and ability to rapid prototype functional test setups to validate products and processes. Essential Functions · Prepare test reports and communicate test results to engineering and other stakeholders. · Interpret and develop test documentation: customer-specific, technical performance, safety, agency, reliability, and manufacturability. · Develop and maintain specialized systems and equipment to record test data with LabVIEW programs and the other internal servers. · Conduct detailed analysis, simulations, and testing to validate designs. · Collaborate with cross-functional teams including engineering, manufacturing, quality, and procurement to ensure project success. · Prepare, communicate and monitor major technical project plans. · Prepare and present technical reports and documentation. · Ensure compliance with industry standards and regulations (e.g., IPC, UL, CE). · Mentor and guide junior engineers in their professional development. · Troubleshoot and resolve complex electrical and software issues with test systems. Knowledge, Skills & Abilities · Functional understanding of electronics and control systems. · Proficient in reading and interpreting electrical schematics and PCB layouts. · Familiarity with CAD software and in-circuit design tools (e.g., Altium, Eagle, Solidworks) recommended. · Ability to generate product and hardware test plans. · Strong analytical and problem-solving skills. · Excellent written and verbal communication skills. · Ability to work independently and lead technical teams. · Experience with project management and the ability to manage multiple projects simultaneously. · Ability to interpret and apply industry standards and regulations. · Strong interpersonal skills and ability to build working relationships with team members and stakeholders. Key Performance Indicators · Contribute to the achievement of project milestones and deadlines. · Support continuous improvement initiates within the engineering department. · Assist in maintaining high standards of product quality and reliability. · Contribute to the overall success of engineering projects and initiatives. Work Environment · Office setting with occasional visits to customer sites and testing facilities. · Safe work environment with minimal exposure to hazards. · Standard office hours with occasional overtime or weekend work for project deadlines. Education & Experience · Bachelor’s degree in Electrical Engineering or a related field (Master’s degree preferred). · Minimum of 8 years of experience in electronics engineering. · Knowledge of industry test standards is highly desirable. · Experience in a laboratory or testing-related environment is highly desirable. · Project management experience preferred. Work Environment · Office setting with occasional visits to customer sites and testing facilities. · Safe work environment with minimal exposure to hazards. · Standard office hours with occasional overtime or weekend work for project deadlines. Lancer Worldwide is unable to sponsor applicants for employment-based visas for this position. All candidates must be legally authorized to work in the United States at the time of application and throughout employment, without the need for employer-sponsored visa status now or in the future. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Physical Demands The role requires the ability to regularly sit, stand, and walk. The individual may occasionally be required to lift and carry up to 25 pounds. Good vision is necessary for computer work and detailed design tasks, and dexterity is needed for typing and handling engineering materials. Additionally, there may be occasional movement and setup of testing equipment and prototypes. Notice To Third Party Agencies Please note that LANCER does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, LANCER will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, LANCER explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of LANCER. EEO Statement Lancer provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Description Looking for a Senior Cloud Engineer to support a large Air Force, IT enterprise, Cyber Weapons System/Program in San Antonio, TX. In this role, you will lead the design, deployment, and optimization of hybrid cloud and virtualization infrastructures across multiple platforms, including AWS, Azure, GCP, and OCI. You will leverage Infrastructure-as-Code tools, containerization, orchestration, and monitoring solutions to ensure scalable, secure, and cost-effective operations. Working closely with cross-functional teams, you will integrate cloud services, enforce security and compliance standards, and support CI/CD pipelines within a DevSecOps framework. Additionally, you will mentor junior engineers, troubleshoot complex issues, and document processes to maintain operational excellence and continuous improvement. Primary Responsibilities • Support the design, deployment, and maintenance of hybrid cloud infrastructures across on-premises and commercial/government cloud platforms (AWS, Azure, GCP, OCI) utilizing IaaS and PaaS solutions., • Administer and optimize virtualization platforms such as VMware ESXi, Hyper-V, and cloud-native virtualization technologies., • Assist with automating deployments, configurations, and resource provisioning using Infrastructure-as-Code (IaC) tools including Terraform, Ansible, and CloudFormation., • Collaborate with cloud and infrastructure teams to support integration efforts and ensure consistent enterprise solutions., • Implement and support containerization and orchestration technologies such as Docker and Kubernetes within cloud and hybrid environments., • Monitor cloud and virtualization environments to maintain system availability, performance, scalability, and operational efficiency., • Troubleshoot infrastructure, application, and system issues, performing root cause analysis and implementing corrective actions as needed., • Apply security best practices including IAM, encryption, and network segmentation while supporting compliance with frameworks such as RMF, NIST, and ISO 27001., • Support and maintain CI/CD pipelines and assist with automation efforts across the software development lifecycle., • Configure and maintain monitoring and logging tools (Prometheus, Grafana, etc.) to support operational monitoring and incident response activities., • Maintain technical documentation including system configurations, operational procedures, and troubleshooting guides., • Provide guidance and knowledge sharing to junior team members and collaborate effectively within cross-functional teams., • Work closely with engineering, operations, and program stakeholders to support infrastructure solutions aligned with mission and business requirements. Basic Qualifications: • Requires BS and 8+ years of prior relevant experience or Masters with 6+ years of prior relevant experience, additional years of experience will be accepted in lieu of a degree., • Must have a DoD-8570 IAT Level 2 baseline certification (Security+ CE or equivalent)., • Must have an advanced cloud certification (AWS Certified Solutions Architect, Azure Solutions Architect Expert, or Google Cloud Professional DevOps Engineer for example)., • Must have an active Secret Clearance with the ability to obtain TS/SCI Preferred Skills and Certifications: • Cloud Certifications: AWS Certified Solutions Architect, Azure Solutions Architect Expert, or Google Cloud Professional DevOps Engineer., • Security Certifications: CISSP, CEH, GIAC or Cloud Security Automation (GCSA)., • Experience with security frameworks (e.g., RMF, NIST 800-53)., • Knowledge of scripting or programming languages, such as Python, PowerShell, or Bash., • Familiarity with log management and monitoring tools (e.g., Splunk, Datadog, or ELK stack)., • Experience with SIEM and/or SOAR tools and capabilities. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. May 15, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $107,900.00 - $195,050.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit _. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at _. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at _. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the _. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

The Software Engineer Principal must have experience with:Providing technical leadership and guidance to cross-functional teams (including developers, security engineers, and operations staff) on secure system design, deployment, and operation. This includes mentoring junior engineers and fostering

Job DescriptionAre we the road to your future? We are currently searching for an experienced Traffic Project Engineer to support our Southwest Region located in either Austin, Round Rock, or San Antonio, TX. The successful candidate will work on challenging transportation design projects providing technical expertise and ensuring compliance with locality and state DOT standards. The candidate will serve as Task Manager and collaborate with multidisciplinary team and provide guidance and direction to project team for various traffic design tasks on roadway, bridge and interchange improvements, intersection modifications and pedestrian/bike facilities projects. This position offers an excellent career opportunity with tremendous growth potential. What you’ll be doing: • Prepare traffic signal design plans for new intersections and signal modifications to facilitate multimodal accommodations, • Prepare temporary traffic control plan/traffic management plan (TMP) and signing, pavement marking plans, • Prepare streetlight design plan and perform photometric analysis using Agi32, • Prepare technical reports for IJR/IMR, and traffic/safety/road diet studies, • Prepare Intelligent Transportation System (ITS) design plans, • Prepare quantities and develop PS&E packages supporting highway design projects, • Assist in preparing conceptual intersection layouts, schematics, signal timings and engineering reports, • Supervise and mentor junior engineers, • Attend project meetings with clients What you need to have: • BS in Civil Engineering, • 5-10 years of traffic engineering experience, • EIT is required, • Proficiency in OpenRoads, • Familiarity with TxDOT and/or general DOT traffic design standards, MUTCD and AASHTO, • Proficiency in traffic analyses software such as VISSIM, Synchro/Simtraffic, Sidra Intersection, HCS, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Bonus points if you have: • Strong interpersonal and communication skills, • PE in Texas, • Self-starter and capable of completing tasks with minimal oversight Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. Austin Round Rock San AntonioTX Texas #LI-SD1

Job Description Civil Engineering Consulting Firm - We are looking for a Project Manager with 10 or more years of experience to be part of our Transportation Business Practice. The Practice encompasses work in the planning and design of transportation projects statewide for the Texas Department of Transportation (TxDOT), regional organizations such as the Alamo Area Regional Mobility Authority, and with county and local governments in and around the Austin and San Antonio Metropolitan Areas. This position can be based out of either our Austin or San Antonio office. We work for several state, regional, city and county clients providing a wide variety of transportation related planning and design work that includes long range transportation planning corridor planning, capital improvement program planning, and schematic and PS&E design. The primary responsibilities of the Project Engineer include: • Performing civil engineering design and analysis on transportation planning and design projects, • Working with junior staff and assisting in the direction of other technical staff to produce quality designs and plans and interpreting plans from other engineering related disciplines (survey, utility, etc.), • Serving as a Project Manager with responsibilities that include budget and schedule management as well as some client interaction Requirements: • Bachelor's Degree in Civil Engineering, • Texas PE license or the ability to obtain a Texas PE license within 6 months of hire, • 10 years of experience in engineering design and plan production, • Experience with Microsoft Office and Bentley design software, • Excellent written and verbal communication skills In addition, the successful candidate is highly motivated and will take initiative, be able to use resources efficiently and effectively, be able to work well with a team of engineers and technicians and is dedicated to providing excellent client service. Preferred Qualifications: • TxDOT pre certifications, • Experience working in Texas Department of Transportation roadway design projects, • Experience working on city and county roadway design projects THE BENEFITS • Opportunity to succeed in your career, • A competitive salary, • A broad benefits package including medical, prescription, dental, vision, company-paid life insurance, and long-term and short-term disability insurance, • 401(k) retirement plan with employer match, • Paid time off and eight paid holidays We also offer additional perks including alternative workweek schedules and possible work from home 1 to 2 days a week. Pay will be commensurate with experience. We are an equal opportunity employer. Please contact Ingrid Annaert for further details at ingrid (dot) annaert (at) sonatatalent (dot) com.

Job DescriptionAre we the road to your future? We are currently searching for an experienced Drainage Project Engineer to support our Southwest Region located in Texas. To be considered for this position, applicants must have, at minimum, 4 years of progressive drainage/water resources and TxDOT experience. What you’ll be doing: • Collecting and analyzing data for inclusion in Project Plans and reports, • Using computer engineering software to design stormwater management and storm drain systems, as well as soil erosion and sediment control systems, • Analyzing and designing hydrologic and hydraulic models for Transportation Improvement projects, • Permitting with different Regulatory and Water Management agencies, • Assisting and preparing project plans using OpenRoads Designer, • Contributing to the preparation and/or modification of considerable scope and complexity engineering reports and calculations for a wide variety of projects, • Preparing and assisting in the preparation of project construction details, quantities, cost estimates and project specifications, • Reviewing project quantity estimates, details, and check calculations and drawings for compliance to project requirements, • Preparing and assisting with the preparation of project schedules, • Collaborating across multiple disciplines, subconsultants, and other professionals to successfully deliver quality projects within budget and schedule, • Overseeing project design activities, supervising production efforts, and mentoring junior level support staff and other designers, • Performing other professional, management, marketing and networking duties as assigned, • Assist with roadway project development and other misc. civil engineering tasks for project design and delivery What you need to have: • Bachelor’s of Science in Civil Engineering, • Valid Professional Engineering Licensure preferred or the ability to acquire it within 6 months, • 4 - 6 years of relative/progressive drainage/water resources and TxDOT experience, • Experience with OpenRoads Designer, Storm CAD, ICPR, HEC-RAS, GIS and/or SUDA software, • Previous TxDOT Drainage design experience and strong knowledge of TxDOT standards and procedures, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Bonus points if you have: • Strong interpersonal and communication skills, • Master's in Water Resources Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. Austin Houston McKinney Rockwall Round Rock San Antonio Tyler TX Texas #LI-SD1

Job DescriptionCloud Engineer, Senior - IDCS(M)Full Time San Antonio, TX (On-site)Secret clearance with TS/SCI eligibility Referral Bonus: $1,000 Sign on Bonus- up to $2,500 Job Description: Semper Valens Solutions is looking for a Senior Cloud Engineer to support a large Air Force, IT enterprise, Cyber Weapons System/Program in San Antonio, TX. Duties: • Design, deploy, and manage virtual cloud infrastructures across hybrid environments (on-premises and cloud) such as AWS, Azure, Google Cloud, or Oracle Cloud (IaaS & PaaS)., • Ensure integration of multiple Cloud teams, processes, and instances to meet a holistic solution., • Maintain and optimize virtualization platforms like VMware ESXi, Hyper-V, and cloud-native virtualization solutions., • Automate deployments and configurations using Infrastructure-as-Code (IaC) tools such as Terraform, Ansible, and CloudFormation., • Provision, maintain, and scale cloud resources in AWS, Azure, GCP, or OCI in collaboration with cross-functional teams., • Monitor cloud resource utilization to ensure cost efficiency and scalability., • Troubleshoot and resolve system, application, and infrastructure issues, performing root cause analysis as needed., • Ensure infrastructure meets security, compliance, and operational standards within a DevSecOps framework., • Support CI/CD pipelines and integrate infrastructure automation into the development lifecycle., • Implement and manage containerization and orchestration technologies, such as Docker and Kubernetes, for microservices architectures., • Configure and maintain monitoring tools to ensure system and application availability and performance., • Identify and implement optimizations to improve efficiency, reduce latency, and enhance system uptime., • Apply security best practices, including identity and access management (IAM), network segmentation, and encryption, to protect hybrid cloud infrastructures., • Assist in audits and compliance initiatives (e.g., RMF, NIST, ISO 27001)., • Document procedures, configurations, and troubleshooting steps to enhance knowledge sharing., • Mentor junior engineers and contribute to team growth and development initiatives., • Other duties as assigned. Required Skills & Experience: • Detailed-oriented with excellent technical, verbal, and written communication skills., • Proficiency in virtualization technologies, including VMware, Hyper-V, and OpenStack., • Strong expertise in US-Gov/DoD cloud platforms such as AWS, Azure, Google Cloud (GCP), and Oracle Cloud Infrastructure (OCI)., • Hands-on experience with Infrastructure-as-Code (IaC) tools like Terraform, Ansible, and CloudFormation., • Solid understanding of containerization (Docker) and orchestration platforms (Kubernetes)., • Familiarity with monitoring tools (Prometheus, Grafana, etc.) and incident management., • Familiarity with networking concepts, including VPCs, subnets, VPNs, and firwalls., • Practical knowledge of DevSecOps principles, methodologies, and best practices. Qualifications: • Requires BS and 8+ years of prior relevant experience or Master's degree with 6+ years of prior relevant experience, additional years of experience will be accepted in lieu of a degree., • Must have a DoD-8570 IAT Level 2 baseline certification (Security+ CE or equivalent)., • Must have an advanced cloud certification (AWS Certified Solutions Architect, Azure Solutions Architect Expert, or Google Cloud Professional DevOps Engineer for example)., • Must have an active Secret Clearance with the ability to obtain TS/SCI Preferred Skills and Certifications: • Cloud Certifications: AWS Certified Solutions Architect, Azure Solutions Architect Expert, or Google Cloud Professional DevOps Engineer., • Security Certifications: CISSP, CEH, GIAC or Cloud Security Automation (GCSA)., • Experience with security frameworks (e.g., RMF, NIST 800-53)., • Knowledge of scripting or programming languages, such as Python, PowerShell, or Bash., • Familiarity with log management and monitoring tools (e.g., Splunk, Datadog, or ELK stack)., • Experience with SIEM and/or SOAR tools and capabilities. Travel: Less than 10% travel is expected for this position. Travel may include continental United States and outside continental United States locations. About Semper Valens Solutions: Semper Valens Solutions, Inc. (SVS) is a Service-Disabled Veteran Owned Small Business (SDVOSB) providing Cost Effective Software and Systems Engineering, Field Support, Training and Full Life cycle Support Management to the DOD and VA community. At Semper Valens, our vision is to remain a creative, cutting edge and cost-effective solutions provider where our shared intellect, industry experience, and technology excellence, make a positive difference in our customer's success. Our solutions help bridge the gap between IT and business prioritizations to optimize budgets, risks and operational processes. We search for outstanding technical professionals, hiring at all levels of the experience spectrum; intermediate, journeyman and senior. Consider us for your career plan. Semper Valens Solutions is an Equal Opportunity Employer Semper Valens Solutions proactively fulfills its role as an equal opportunity employer. We do not discriminate against any employee or applicant for employment because of race, color, sex, religion, age, sexual orientation, gender identity and expression, national origin, marital/parental status, pregnancy/childbirth, or related conditions, physical or mental disability, genetic information, status as a Disabled Veteran, Recently Separated Veteran, Active-Duty Wartime or Campaign Badge Veteran, Armed Forces Services Medal, or any other characteristic protected by law. If you require a reasonable accommodation to apply for a position with Semper Valens Solutions through its online applicant system, please contact Semper Valens Solutions Human Resources Department at (830) 899-6870. Semper Valens Solutions is an affirmative action/equal opportunity employer - minorities, females, disabled, and protected veterans are urged to apply. Applicants have rights under Federal Employment Laws. All Jobs at Semper Valens Solutions: https://sempervalens.com/careers

Job Description Job Title: Lead Mechanical Engineer – Autonomous Robotics Location: San Antonio, Texas Department: Engineering Reports To: Hardware Engineering Manager Job Type: Full-Time About Renu Robotics: Renu Robotics is a leader in autonomous technology for vegetation management. We build all-electric, autonomous machines that help maintain large-scale sites safely, efficiently, and sustainably. Our culture values teamwork, quality, safety, and continuous improvement. At Renu Robotics, we believe: No one wins unless everyone wins. Job Summary: We are seeking a Lead Mechanical Engineer to drive the design, development, and integration of industry-leading cutting-edge autonomous robotic systems. This role will oversee mechanical design efforts across multiple projects, lead a team of engineers, and collaborate cross-functionally to deliver robust, scalable, and high-performance autonomous systems. Key Responsibilities: • Lead the mechanical design,development,and testingof robotic platforms including chassis, actuators, enclosures, and integration of sensors and electronics., • Own the full product development lifecycle from concept tocommercialization, including prototyping,lab and fieldtesting, anddesigniteration., • Lead design reviews,DFMEAs,documentation efforts,and change releases., • Collaborate with electrical, software, and systems engineers to ensure mechanical and system-level integration., • Apply DFM (Design for Manufacturing) and DFA (Design for Assembly) principles for efficient production., • Interface with vendors and suppliers forcomponentsourcing,validation,prototyping, and manufacturing support., • Ensurescompliance withindustry-standardsafety, reliability, andregulatoryprinciples., • Performsdesignverification andvalidation,and mechanical analysis (thermal, stress, dynamics)., • Develop and execute test plans for mechanical systems including field validation., • Mentor junior engineers andestablishbest practices in mechanical design and systems engineering. Qualifications: • Bachelor's degree in mechanical engineeringor related field from an accredited university. MS in Mechanical Engineering (preferred). • 7+ years of mechanical design experience, preferably in robotics, automation, or complex mechatronic systems., • StrongproficiencyinSolidWorksandSolidworksPDM,3D CADmodeling,and mechanical simulation tools(Ansys, FEA, CFD, tolerance stack analysis)., • Understand and apply GD&T standards., • Solid grasp of EMI/EMC concepts including system level grounding and shielding., • Designing forharsh environments (temperature, shock, vibration)., • Knowledge of CSA Class1, Div2 ,CE,anUL(preferred)., • Demonstrabletrack recordofthe delivery of commercial products., • Hands-on experience with prototyping tools (e.g., 3D printing, CNC, sheet metal fabrication)., • Deep understanding of materialselection, structural design, thermal management, and kinematics., • Experiencewithelectro-mechanicalcomponents such as actuators,stepperand drive motors,gearboxes, sensors, and embedded systems., • Excellent communication, leadership, and cross-functional collaboration skills., • Experience working within ISO 9001:2015 Quality Management System Framework and other regulated frameworks., • Experience in commercial product/system delivery in harsh environments., • Experience with ERP systems (i.e.SAP, NetSuite),andQMS systems (i.e.Arena, Adept,MasterControl)., • Experience leading engineering projects and teams. Preferred Experience: • Autonomous or semi-autonomous mobile robots (e.g., drones, AMRs, humanoids)., • Design for rugged environments (military, industrial, outdoor)., • Familiarity with robotics standards (ISO 10218, R15.06, etc.)., • Experience with agile development and rapid prototyping environments is a plus, • Working knowledge of motion control, embedded systems, and system integration., • Experience in a manufacturingenvironment., • Experience ensuring product quality including standards, statistical methods,and testing. What We Offer: • Opportunity to work on breakthrough technologies in robotics., • Be part of a global business., • Collaborative and mission-driven team culture., • Competitive compensation and benefits package., • Flexible work environment.

Job DescriptionAre we the road to your future? We are currently searching for an experienced Senior Drainage Project Engineer to support our Southwest Region located in Texas. To be considered for this position, applicants must have, at minimum, 10 years of progressive drainage/water resources and TxDOT experience. What you’ll be doing: • Collecting and analyzing data for inclusion in Project Plans and reports, • Using computer engineering software to design stormwater management and storm drain systems, as well as soil erosion and sediment control systems, • Analyzing and designing hydrologic and hydraulic models for Transportation Improvement projects, • Permitting with different Regulatory and Water Management agencies, • Assisting and preparing project plans using OpenRoads Designer, • Contributing to the preparation and/or modification of considerable scope and complexity engineering reports and calculations for a wide variety of projects, • Preparing and assisting in the preparation of project construction details, quantities, cost estimates and project specifications, • Reviewing project quantity estimates, details, and check calculations and drawings for compliance to project requirements, • Preparing and assisting with the preparation of project schedules, • Collaborating across multiple disciplines, subconsultants, and other professionals to successfully deliver quality projects within budget and schedule, • Overseeing project design activities, supervising production efforts, and mentoring junior level support staff and other designers, • Performing other professional, management, marketing and networking duties as assigned, • Assist with roadway project development and other misc. civil engineering tasks for project design and delivery What you need to have: • Bachelor’s of Science in Civil Engineering, • Valid Professional Engineering Licensure or the ability to acquire it within 6 months, • 10+ years of relative/progressive drainage/water resources and TxDOT experience, • Experience with OpenRoads Designer, Storm CAD, ICPR, HEC-RAS, GIS and/or SUDA software, • Previous TxDOT Drainage design experience and strong knowledge of TxDOT standards and procedures, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • Valid driver’s license and a satisfactory motor vehicle report (MVR) Bonus points if you have: • Strong interpersonal and communication skills, • Master's in Water Resources field Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. Austin Houston McKinney Rockwall Round Rock San Antonio Tyler TX #LI-SD1

Job Description Our client is seeking a Civil Engineer with 8 or more years of experience in stormwater related planning and design for public entities. The primary focus of this position includes leading the technical aspects of projects including hydrologic and hydraulic modeling and planning studies, performing 2D hydraulic analysis, and assisting with the development and coaching of junior staff. Preferred candidates will have demonstrated project experience serving as a technical lead for drainage master plans, floodplain modeling and mapping, open channel design, and urban drainage systems for municipalities, counties, river authorities, TWDB, and TxDOT. The candidate must also have an advanced knowledge of using 2D hydraulic software including Innovyze ICM and HEC-RAS 2D. Requirements: • Bachelor of Science in Civil Engineering, • 8 or more years of experience in hydrologic and hydraulic studies, design and plan production for urban drainage and flood control projects, • Texas PE license or the ability to obtain a Texas PE license within 6 months of hire, • 3 or more years of experience in managing or mentoring junior staff, • Proficiency with HEC-HMS, HEC-RAS (steady- and unsteady-state), • Proficiency with Innovyze ICM and HEC-RAS 2D, • Knowledge of local, county and state agency submittal process, • Ability to work independently and within a team environment, • Excellent verbal and written communication skills, and ability to convey engineering information concisely to technical and non-technical audiences Preferred Qualifications: The ideal candidate also has knowledge of the following: • Working knowledge and experience with XPStorm, StormCAD, CivilStorm Drainage tools, and EPA-SWMM, • Proficiency in both AutoCAD Civil 3D and MicroStation Geopak, • Experience with MicroStation Subsurface Utility Design and Analysis (SUDA), • Certified Floodplain ManagerWe also offer additional perks including alternative work week schedules and possible work from home 1 to 2 days a week. Pay will be commensurate with experience.

Job Description Civil Engineering Consulting Firm - We are looking for a Project Engineer with 5-10 years of experience to be part of our Transportation Business Practice. The Practice encompasses work in the planning and design of transportation projects statewide for the Texas Department of Transportation (TxDOT), regional organizations such as the Alamo Area Regional Mobility Authority, and with county and local governments in and around the Austin and San Antonio Metropolitan Areas. This position can be based out of either our Austin or San Antonio office. We work for several state, regional, city and county clients doing a wide variety of transportation related planning and design work that includes long range transportation planning corridor planning, capital improvement program planning, and schematic and PS&E design. The primary responsibilities of the Project Engineer include: • Under general direction, perform civil engineering design and analysis on transportation planning and design projects, • Working with junior staff and assisting in the direction of other technical staff to produce quality designs and plans and interpreting plans from other engineering related disciplines (survey, utility, etc.), • Serving as a Task Manager or Assistant Project Manager with responsibilities that include budget and schedule management as well as some client interaction Requirements: • Bachelor's Degree in Civil Engineering, • Texas PE license or the ability to obtain a Texas PE license within 6 months of hire, • 5-10 years of experience in engineering design and plan production, • Experience with Microsoft Office and Bentley design software, • Excellent written and verbal communication skills In addition, the successful candidate is highly motivated and will take initiative, be able to use resources efficiently and effectively, be able to work well with a team of engineers and technicians and is dedicated to providing excellent client service. Preferred Qualifications: • TxDOT pre certifications, • Experience working in Texas Department of Transportation roadway design projects, • Experience working on city and county roadway design projects THE BENEFITS We offer our team members: • Opportunity to succeed in your career, • A competitive salary, • A broad benefits package including medical, prescription, dental, vision, company-paid life insurance, and long-term and short-term disability insurance, • 401(k) retirement plan with employer match, • Paid time off and eight paid holidays We also offer additional perks including alternative workweek schedules and possible work from home 1 to 2 days a week. Pay will be commensurate with experience. We are an equal opportunity employer. Please contact Ingrid Annaert for further details at ingrid (dot) annaert (at) sonatatalent (dot) com.

Job DescriptionPosition Summary The Electrical Engineer - Level III leads the development of electrical design documents for commercial building projects from concept through construction administration, ensuring compliance with applicable codes, standards and client requirements. This role develops branch circuit distribution systems for lighting and power applications and performs electrical load calculations, panel schedules, voltage drop calculations and basic short-circuit and coordination studies. The Electrical Engineer Level III prepares electrical drawings, specifications and construction documents while selecting appropriate equipment and devices based on performance, cost and system compatibility. This position coordinates closely with multidisciplinary MEP teams and leads design and construction meetings with clients, consultants and contractors to support project execution and resolve technical issues. The role conducts site visits, supports construction administration through submittal and RFI review and prepares project documentation to ensure accuracy and continuity through construction. This role requires strong technical skills, attention to detail and a collaborative mindset. Salary - $100,000 - $126,000 Working Hours • M 8:00 am – 5:30 pm, Onsite, • T 7:30 am – 5:30 pm, Optional Remote, • W 7:30 am – 5:30 pm, Onsite, • T 7:30 am – 5:30 pm, Onsite, • F 7:30 am – 12:00 pm, Optional RemoteHolidays - Nine (9) Paid Holidays Training - Paid Professional Development and CEUs Culture - Family First, Classic Casual Career Path – Mentor, Supervisor, Project Manager and Subject Matter Expert Perks • 100% Paid Employee Medical, • 50% Paid Employee Dental and Employee Vision, • 100% Paid Employee Life, Short-Term and Long-Term Disability, • 401(k) with Employer MatchMinimum Requirements, • Bachelor’s Degree in Electrical Engineering or related field, • 4+ years of MEP electrical design experience in municipal/aviation, education, healthcare or commercial sectors, • 1+ years of project management or task‑lead experience, • Current Texas Professional Engineer (PE) license or ability to obtain Texas licensure, • Advanced in AutoCAD, Revit, Bluebeam and MS Office software, • Knowledge of the National Electrical Code (NEC), applicable National Fire Protection Association (NFPA) standards and local building codes, • Strong communication skills and the ability to collaborate effectively within a multidisciplinary team, • Valid Texas Driver’s License with acceptable Motor Vehicle Record (MVR) and background check is requiredExpectations, • Develops branch circuit distribution systems for lighting and power applications in commercial facilities, ensuring compliance with applicable electrical codes and standards., • Performs electrical load calculations, panel schedules, voltage drop calculations and basic short-circuit and coordination studies to support system design., • Produces electrical engineering drawings, specifications and construction documents that align with client requirements, project budgets and established schedules., • Responsible for selecting equipment and devices, evaluating cost, performance and compatibility with overall building systems., • Coordinates design efforts with multi-disciplinary engineering teams, including mechanical and plumbing disciplines, as well as AutoCAD and Revit production staff, to ensure integrated and high-quality project deliverables., • Leads design and construction meetings with clients, consultants and contractors to facilitate coordination, resolve issues and advance project progress., • Prepares, reviews and monitors contracts, fee proposals and contract negotiations to ensure alignment with project scope and firm objectives., • Plans, schedules, conducts and coordinates detailed phases of project work while consistently maintaining firm-wide quality standards across all deliverables., • Conducts construction site visits and performs field surveys to document existing conditions, verify code compliance and monitor construction progress against design documents., • Performs construction administration tasks by reviewing submittals and shop drawings, responding to RFIs, and attending construction administration meetings to support successful project delivery., • Prepares meeting minutes, site observation reports and other project documentation to support communication and project tracking., • Supports client relationships through responsive communication and reliable project delivery., • Mentors junior team members by assigning duties, providing technical guidance and supporting professional growth and skill development., • Works closely with senior engineers and designers to support project execution and continuous learning., • Contributes to a culture of shared knowledge, collaboration and mutual respect., • Performs other duties, tasks and special projects as assigned.The above description covers the principal duties and responsibilities of the job. The description shall not, however, be construed as a complete listing of all miscellaneous, incidental or similar duties which may be required from day-to-day. The candidate selected for employment will be required to submit to a criminal background check, education verification and drug test. Interested candidates should submit their resume, with salary requirements, via our career portal on our website at www.seekinghr.com or contact us directly at (210) 679-4879 with any questions. Equal Employment Opportunity Employer M/F/D/V

Job Description We have just obtained a multi-million contract with TxDOT - WE NEED DESIGNERS !!! By working with us, you can create a career that is impactful to you while building communities that matter to all of us. With our current growth, it is an exciting time to join our team. As a vital team member, you will play a pivotal role in delivering successful and meaningful projects. Join us as a Project Engineer-Transportation Design and bring your technical expertise to make a difference! We are civil engineering design specialists – Roads | Highways | Bridges delivering projects for the Texas Department of Transportation, Bexar County, Alamo Area Regional Mobility Authority and the City of San Antonio. What You Will Do:  Responsible for the planning and distribution of discipline-specific work, and proven adherence to the schedule and budget on projects.  Assists in business development responsibilities, including proposal generation.  Oversee completeness and accuracy of project team’s work within the technical discipline.  Guides, trains and mentors’ team to overall project objectives.  Coordinates technical aspects of project with client counterpart and teaming partners at staff level for work within the discipline.  Assists with the development of scope of work, level of effort and project schedules for projects and/or assignments within discipline  Performs other duties as assigned. What You Will Need:  Bachelor’s degree in engineering with at least 8 years of relevant experience in Transportation Engineering  Licensed Professional Engineer, P.E.  Excellent communication and leadership skills  Working knowledge of TxDOT design requirements  Demonstrated DOT Transportation Design and Plan Production Experience What You Will Bring:  Previous experience in consulting engineering with a primary focus on TxDOT (or other DOT) transportation project design and/or municipal project works.  Understands the impacts of decisions on technical design and work planning.  Coordinates work planning and design effectively across multiple technical disciplines.  Prepares high quality deliverables that are on time, and within budget and scope.  Mentor, train and review work of junior engineer staff and provide constructive feedback.  3D Modeling Design experience with Open Roads Designer What We Prefer:  Master’s degree in engineering  TxDOT pre-certifications  8+ years transportation experience  Task management or Deputy PM experience  Bentley Software proficiency such as MicroStation, Open Roads, ProjectWise  Business Development experience activities to include identifying business opportunities, assisting in the production of proposals and letters of interest, as well as participating in interviews and other presentations.

Job Description Position Summary The Fire Protection Engineer serves as a senior technical expert responsible for the design, evaluation, and enforcement of fire protection and life safety systems for government facilities. This role leads complex engineering analyses, ensures compliance with federal, state, and local codes, and provides authoritative guidance to project teams, facility leadership, and contractors. The position plays a critical role in safeguarding personnel, infrastructure, and mission continuity through advanced fire protection engineering practices. Key Responsibilities • Serve as a subject matter expert (SME) in fire protection engineering, providing technical leadership and consultation to government stakeholders and project teams., • Lead the design and evaluation of fire detection, alarm, and suppression systems for complex facilities and infrastructure., • Review and approve building plans, specifications, and contractor shop drawings for compliance with applicable codes and standards (e.g., NFPA, UFC, IBC, IFC)., • Conduct and oversee fire hazard analyses, performance-based design studies, and risk assessments., • Perform and supervise site inspections, field surveys, and acceptance testing of fire protection systems., • Evaluate building designs for fire resistance, egress, water supply adequacy, and system effectiveness., • Direct the planning, installation, modification, and maintenance of fire protection systems., • Provide technical guidance to architects, engineers, and contractors regarding fire code interpretation and compliance., • Develop and review fire safety plans, life safety plans, and compliance documentation., • Lead development of training programs and conduct fire protection training for facility personnel., • Research and interpret evolving fire protection codes, standards, and technologies; recommend updates to policies and design criteria., • Support hazardous materials assessments and evaluate risks associated with storage and manufacturing environments., • Prepare and review detailed technical reports, engineering analyses, and recommendations for leadership decision-making. Education & Experience • Bachelor’s or Master’s degree in Engineering (Fire Protection, Mechanical, Electrical, Civil, Chemical, or related field) from an ABET-accredited institution., • Minimum five (5) years of professional engineering experience in fire protection engineering., • Minimum three (3) years of experience with fire alarm and fire suppression systems., • Professional Engineer (PE) license in Fire Protection Engineering (or closely related discipline) required. Knowledge, Skills, and Abilities (KSAs) • Advanced knowledge of fire protection engineering principles, systems, and life safety requirements., • Extensive familiarity with NFPA standards, International Codes (IBC/IFC), and federal criteria (e.g., UFC)., • Strong analytical skills in fire hazard analysis, performance-based design, and risk assessment., • Ability to interpret and enforce complex codes, standards, and regulatory requirements., • Excellent written and verbal communication skills, including technical report writing., • Ability to lead projects, mentor junior engineers, and coordinate across multidisciplinary teams., • Strong problem-solving skills with attention to detail and mission-focused decision-making. Additional Requirements • U.S. Citizenship required., • Ability to obtain and maintain a Public Trust or Security Clearance, as required., • Occasional travel required for inspections, site visits, and project oversight. Work Environment • Combination of office, field, and construction site environments., • May involve exposure to active construction zones and operational facilities requiring adherence to safety protocols. Leadership & Supervisory Expectations • May serve as a technical lead or project manager on fire protection engineering projects., • Provides mentorship and guidance to junior engineers and technical staff., • Acts as a liaison between government agencies, contractors, and stakeholders. Preferred Qualifications • Experience with federal facility standards (UFC, VA, DoD, or GSA criteria)., • Experience in healthcare or high-risk/mission-critical facilities., • Proficiency with AutoCAD and fire modeling software (e.g., FDS, Pathfinder). Job Type: Full-time Employee Benefits: We believe in taking care of our employees so they can perform their best work. Our benefits include: • Competitive health, dental, and vision coverage, • Retirement savings plan with employer contribution, • Paid time off to rest, recharge, and take care of what matters most, • Support for your growth through training and development opportunities, • Short and Long Term Disability Plans, • Flexible Spending Account, • A collaborative, people-first work environment, • Employee Discounts for select retailers

Job DescriptionEControls is looking for a Mechanical Engineer to join our growing R&D team. The Mechanical Engineer leads the development of mechanical and electro‑mechanical products by driving design analysis, validation planning, and cross‑functional collaboration throughout the product development lifecycle. This role serves as the product expert, working closely with supply chain, manufacturing engineering, sales, quality, customers, and suppliers to ensure robust designs, proper validation, and manufacturability. The position also contributes to organizational strength by mentoring junior engineers, supporting cost and schedule estimates, and elevating engineering consistency and technical capability. Responsibilities • Responsible for new product development of mechanical and electro‑mechanical products, including driving and supporting the team through the phase gate product development process., • Lead design analysis (FEA, CFD), design reviews, DFMEAs, PFMEAs, and DFM reviews., • Function as product expert, collaborating closely with internal cross‑functional teams including supply chain, manufacturing engineering, sales, and quality to develop new and support existing products., • Interact externally with both customers and suppliers on technical topics., • Work closely with Program Manager to estimate product cost and development timeline., • Develop and write design validation test specifications, working closely with the test lab to ensure products are properly validated., • Mentor and train junior engineers and drafters to help develop a strong, consistent engineering organization.Requirements, • Minimum of five (5) years of relevant experience, • Bachelor’s degree in Mechanical Engineering or related field, • MS in Mechanical Engineering (preferred), • Proficient in 3D mechanical design (SolidWorks preferred), • Proficient in one or more analysis tools (FEA, CFD, Tolerance stack), • Excellent oral and written communication skills, • Attention to detail, • Understand and apply GD&T standards, • Ability to work in a fast‑paced and challenging environment, • Injection molding/die casting processes and design practices, • Seal design, • Knowledge of CSA Class 1, Div 2 and UL (preferred)EControls is a global provider of innovative, state-of-the-art integrated controls solutions for internal combustion engines and electric drive systems in the off-highway, on-highway, and stationary equipment markets. EControls designs world-class, full-authority engine management systems for major OEMs around the world. Our global engine development labs and engineering staff offer full-range support, from design guidance for base engine conversion to hardware, software, and engine calibration to meet each application's specific requirements. We are passionate about customer satisfaction and service. We fearlessly engage in any effort that will eliminate our customers’ risk and clear a path to their success. We immerse ourselves in our customers’ world, reveal unknowns and deliver integrated solutions. Equal Employment Opportunity EControls provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, EControls complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Powered by JazzHR Nrf6ZLjOwW

Job DescriptionSalary: DOE The mission of the Geotechnical Project Manager for HVJSCT, a leading specialty engineering firm in Texas, is to assure client satisfaction through preparation of quality reports that address the specific project requirements within the project schedule, budget and design constraints. This includes responsibility for: • Forecast project beginning, schedule and profitability., • Develop and implement actions needed to achieve or exceed project goals., • Prepare proposals including detailed cost estimates., • Provide client satisfaction, • Guide and mentor junior staffs, • Team Building, • Assist with Business Development, • Track project expenses to ensure actual work is performed within budget, • Review Invoices prior to issuance., • Manage projects, meeting HVJ financial goals and quality standards. Sign/seal technical reports., • Review all reports prior to submittal to the client for completeness and accuracy, • Identifies and pursues new opportunities to grow geotechnical engineering services Key Criteria/Requirements: • MSCE with at least 5 years of Geotechnical Engineering experience, or BSCE with at least 10 years of Geotechnical Engineering experience., • Must have Professional Engineer license in the State of Texas., • Experience In TxDOT, City and Municipality Projects Is A Plus., • Experience with Central and South-Central Texas Geology and Soil Condition Is A Plus., • Experience with conventional and advanced geotechnical testing and data interpretations., • Knowledgeable on routinely used geotechnical software., • Excellent written and communication skills., • Demonstrated ability to solve complex problems, • Position will require the candidate to adhere to work assignments/schedules, be self-motivated, organized and have a keen sense of detail., • Position will require to work with supporting staffs, managers and clients; and therefore, the candidate needs to be a team player., • Valid Texas Drivers License with no history of accidents or alcohol/drug related traffic offenses and valid right to work documents. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 1. While performing the duties of this job the employee is frequently required to sit and talk or hear, and to utilize a computer and software applications such as Microsoft Office., 2. The employee must have the ability to lift and/or move concrete, soil, or asphalt samples up to 50 pounds., 3. The employee is required to stand; walk; drive; use hands or fingers; handle or feel objects, tools, or controls; reach with hands and arms; and stoop, kneel, crouch, or crawl., 4. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus.

Job DescriptionShape complex HVAC builds in San Antonio, TX Picture your Monday: a quick kickoff with field crews, a client touch-base to align on milestones, then out to a job site to verify install progress and safety practices. After lunch, you refine a proposal with cost breakdowns and a phased schedule, review a change order with a subcontractor, and wrap the day by finalizing a progress report and coaching a junior engineer through a technical challenge. If that rhythm excites you, this role is for you. What you'll deliver • End-to-end leadership of commercial HVAC projects—from scope and planning through turnover—hitting schedule and budget targets., • Clear coordination with owners, GCs, subs, and internal teams to define goals, milestones, and deliverables., • Regular site presence to monitor installation quality, troubleshoot field issues, and keep work moving safely., • Well-scoped proposals and presentations, including cost estimates and timeline commitments., • Uncompromising adherence to safety protocols and relevant industry codes/standards., • Accurate, organized documentation: contracts, change orders, RFIs, and periodic progress reports., • Hands-on technical guidance to project teams throughout design, install, and commissioning., • Strong, trust-based client relationships that encourage repeat work.What you bring, • Bachelor’s degree in Mechanical Engineering, Construction Management, or a related discipline preferred., • 3+ years managing commercial HVAC projects with proven schedule and cost control., • Deep understanding of HVAC systems, installation methodologies, and maintenance practices., • Fluency with project management software and common planning tools., • Outstanding communication and collaboration skills across field and office., • Ability to juggle multiple active jobs while meeting deadlines and quality targets., • Sharp problem-solving instincts and meticulous attention to detail., • Valid driver’s license and readiness to travel to San Antonio-area job sites as required. Join us to build systems that keep businesses running at their best—safely, efficiently, and on time.

_ Civil / Structural Engineer - BUILDER - SMS Job Type Full-time, Hybrid (remote / on-site) Location Based in San Antonio, relocation package available Salary Range $85,000 - $135,000 (contingent on education & experience) This position is responsible for providing program support for the Defense Health Agency (DHA) BUILDER Sustainment Management Systems (SMS) program. This position will use to develop detailed building reports describing condition of building systems and their major components. These reports will be used to plan and prioritize the sustainment activities and funding for a large portfolio of healthcare facilities. DHA utilizes BUILDER Sustainment Management System (SMS). BUILDER SMS is a web-based software application developed to assist engineers, project planners, and facility managers in making decisions on investment strategies for repair and replacement of building equipment and systems. Essential Functions: • Use existing data to develop reports that inform planners of current building conditions., • Develop broad scopes of work for replacement of existing equipment., • Develop projects for facility rehabilitation. Projects will vary in size and scope., • Assist in assessment of structural elements and foundations. Duties/Responsibilities: • Use knowledge of building systems to develop projects for repair and rehabilitation of facilities., • Provide training for new or junior field technicians., • Develop Recapitalization Reports for large medical facilities., • Update and expand field reference guide as needed., • Ensure accurate BUILDER data collection to reflect field-observed conditions., • Attend, prepare, and present briefings as required., • Work collaboratively with the Lead Engineering and Program Managers to manage all contractual obligations, timely deliverables, travel arrangements, and field operations. Work collaboratively within the organization to support the interests and needs of our clients., • Ensure compliance with federal, state, local, industry, contractual, and company regulations, standards, specifications, and best practices., • Achieve BUILDER subject matter expertise., • Perform other related duties as assigned., • Business travel up to 25%. Work Environment: Work is hybrid with up to three days a week in office and two days remote. Some site visits may be required at DoD medical facilities and possible off-site meetings. Employees may be required to travel in CONUS and OCONUS areas. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits Offered: • Paid time off (PTO), up to 4 weeks depending upon experience, • 10 Paid Federal Observed Holidays, • First of the month - medical, dental, & vision coverage, • 401K with Employer match of 5%, • Supplemental STD, LTD, Life, Accident and Critical Illness coverage, • Relocation package available, • EAP (Employee Assistance Program), • Inquire to learn more about our extensive Benefits and Employee Engagement Opportunities! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. We invite you to learn more about GoldenWolf by visiting our website at _. Education and Experience: • A bachelor's degree in Structural Engineering from an ABET-accredited 4-year program is required., • 3 - 5 years of technical experience with building systems, preferred., • Previous project experience performing infrastructure and facility assessment projects for municipal, state, and Federal entities is preferred., • Experience with DHA is a plus., • Experience in the construction and/or facilities management fields is highly preferred., • Experience creating comprehensive reports with engineering-based recommendations is preferred., • Experience with the BUILDER SMS or other SMS software platforms is preferred., • Must be eligible to obtain and maintain a favorable Department of Defense (DoD) Clearance Required Skills/Abilities: • Strong attention to detail, • Demonstrated ability to communicate concisely, both verbal and written, with client and company leadership., • Must be proficient with Microsoft (MS) Office Suite (MS Word, Excel, Outlook, Teams, etc.), • Strong analytical skills., • Ability to produce detailed and comprehensive technical reports and presentations.

As a dedicated Salesforce CRM Software Engineer Senior, you will join a dynamic, startup-minded team within the Investment Experience Technology organization at USAA, part of the Technology group. Engaged in all phases of the software systems and application development lifecycle which include gathe

Write clean, efficient, and well-documented code, following best software engineering practices. Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Join our customer's team as a Software Developer, where innovation

Computer Science, Software Engineering, Software Development, Computer Engineering, Mobile App Development, Cloud Computing, Data Science, Big Data or other related fields. Collaborating with project leads, solution engineers, and supply managers on complex or experimental projects.

As a Software Engineer, you'll work on some of the most technically challenging and impactful parts of our product. Software Engineering experience shipping user-facing features or products. This is a highly collaborative role: you'll partner closely with designers, product managers, and other engin

Computer Science, Software Engineering, Software Development, Computer Engineering, Information Technology or other related fields.

They are responsible for identifying trends that drive revenue, optimizing operational efficiency, and mentoring junior team members.

Collaborating with project leads, solution engineers, and supply managers on complex or experimental projects. Software Development, Computer Science, or other related fields.

Direct the future of AI at Figma in collaboration with cross-functional teams of innovative software engineers, product managers, and data scientists. Software Engineering, with 1 or more years of developing generative AI products. As Figma’s customer base continues to expand and diversify, and ne

Figma is seeking a versatile and experienced Machine Learning / AI Engineer to join our growing AI team, working at the intersection of applied machine learning, infrastructure, and product innovation. You’ll collaborate closely with engineers, researchers, designers, and product managers across m

Rendering & Animation engineers use a combination of C++ and TypeScript for CPU-side code (to support our two renderers); our shaders are written in GLSL. The Rendering & Animation team is looking for engineers with domain expertise in rendering algorithms and APIs, as well as both high- and low-lev

Software Engineering experience, specifically in backend or infrastructure engineering. As a Software Engineer on our Infrastructure team, you’ll help design, build, and operate the systems that power our real-time collaborative design tools used by millions of people worldwide. We’re scaling fa

Software Development, Computer Science, or other related fields.

We’re looking for an experienced Engineer to scale and drive the initiatives and programs that support Figma’s production engineering efforts, allowing our product teams to rapidly deliver new features. Have 5+ years of Software Engineering experience operating infrastructure components / servic

Computer Science, Software Engineering, or related field. Collaborating with project leads, solution engineers, and supply managers on complex or experimental projects.

Role Name: Software Engineer Lead - Power Platform Location: Dallas / Farmers Branch, TX (Onsite – 5 Days/Week) Job Type: W2 contract (Possible Extension / Contract-to-Hire) Job Description We are seeking an experienced Software Engineer Lead with strong expertise in the Microsoft Power Platform e

Collaborating with project leads, solution engineers, and supply managers on complex or experimental projects. Software Development, Computer Science, or other related fields.

Status Labs is seeking a versatile Software Engineer to sit at the intersection of client delivery, internal tooling, and web development. We are an AI-forward team, and the ideal candidate will bring genuine fluency with large language models, AI APIs, and prompt engineering as a core part of their

Basic Requirements Full Professional Proficiency in Spanish and English Being a resident in the US for the last 2 consecutive years and having familiarity with current and historical business, media, sport, news, social media, and cultural affairs in the US Ability to follow guidelines and conduc

DataAnnotation is committed to creating high-quality AI.Join our team to help train the next generation of AI while enjoying the flexibility of remote work and the freedom to set your own schedule.This role is designed to fit a variety of lifestyles — whether you’re looking to con