Trabajos lighting en Thornton, Colorado - Page 2Crear alertas

Job Description Show Technician – Denver, Capitol Hill neighborhood The Show Technician is responsible for the daily technical operation of the projection-based exhibition, ensuring all show systems function reliably and consistently to deliver a high-quality guest experience. This role supports the setup, testing, operation, and maintenance of all projection and audiovisual equipment, while troubleshooting technical issues and maintaining the visual and operational standards of the production. Position Overview Daily Show Setup & Operation • Prepare and power up all projection, audio, media server, and show control systems prior to opening each day., • Conduct daily technical checks to ensure all systems are operating correctly and the show is ready for public presentation., • Verify alignment, brightness, and synchronization of projectors and media content., • Monitor the performance of projection and audiovisual systems during presentations., • Troubleshoot and resolve issues related to projectors, media servers, networking, and playback systems., • Coordinate with remote technical advisors if advanced technical support is required., • Perform routine maintenance of projection equipment, including lens cleaning, filter checks, and cable inspections., • Ensure all technical equipment is handled and stored correctly., • Report equipment faults or wear that may require repair or replacement. Show Quality Control • Maintain consistency of image quality, projection mapping, audio levels, and show timing., • Ensure the presentation meets established technical and artistic standards., • Identify opportunities to improve operational efficiency and show reliability. End-of-Day Shutdown • Safely power down and secure all technical systems and equipment after the final show., • Document any technical issues or maintenance needs in daily reports. Qualifications & Skills • Experience with projectors, AV technology, media servers, or show control systems., • Video Systems (Critical): Hands-on experience with VERTEX media servers and show control systems. Familiarity with video signal distribution to projectors, including Lightware network matrix systems (RX/TX), • Audio Systems (Critical): Experience with professional audio systems, including QSC Q-SYS platforms and Dante networking. Familiarity with L-Acoustics speakers and amplification systems., • Lighting Systems (Preferred): Working knowledge of lighting control systems is an asset. Experience with Chauvet fixtures, GrandMA3 on PC control environments, and Elation nodes is beneficial. Training can be provided., • Networking (Preferred): Understanding of AV networking infrastructure, including Netgear managed switches and Access points, using network management tools such as Netgear Engage., • Ability to diagnose and troubleshoot technical issues under operational conditions., • Strong attention to detail and commitment to maintaining high presentation standards., • Comfortable working in live show or exhibition environments with public audiences., • Ideally, 2-3 years demonstrable experience working with the Critical systems noted., • Man-Lift certified and ability to work at heights. Working Conditions • Evening and weekend work required based on Event schedules. Day and late night work during load in period according to Production schedules., • The Technician operates the technical elements of show alone, with on-site guest/customer operational support and remote technical support., • Work performed in darkened exhibition environments and technical areas., • Ability to lift up to 50lbs comfortably, • Reports to the show’s General Manager and remote Technical Director, • Rate: $50/hr for 30-40hrs/wk depending on event schedule. Work Location: In person

Job Description Equipment Operator At Lumin8 Transportation Technologies, we are committed to delivering a full range of Smart Infrastructure Services for the transportation industry. We design, construct, install, integrate, operate, monitor, and maintain a wide variety of Transportation Infrastructure Assets/Technologies for our customers and communities. We are currently seeking an experienced Equipment Operator to join our team. This role includes operating a variety of specialized vehicles and equipment such as Hydro-Vac Trucks, Bucket Trucks, Excavators, Backhoes, Cranes, concrete saw and other heavy machinery used in commercial electrical and infrastructure projects. We offer a comprehensive benefits package including Paid Time Off, Holiday Pay, Discretionary Bonus, Medical, Dental, Vision, Short/Long-Term Disability, Life Insurance and matching 401(k) plan. To learn more about us and see out opportunities, please visit our website at . DUTIES and RESPONSIBILITIES: • Skilled and technical work in the construction, installation, and repair of traffic signal systems, highway lighting, and other transportation related systems., • Drives construction equipment to and from job sites, loads and unloads equipment from trucks and/or trailers., • Inspects equipment, performs preventive maintenance, and reports needed repairs., • Safely and efficiently operates all equipment including but not limited to; aerial lift/bucket trucks, trenchers, derrick/digger trucks, cranes, backhoes, trackhoes, air compressors, and concrete saws., • Makes operating adjustments and minor repairs to equipment such as changing buckets and teeth and tightening loose bolts and fittings., • Assist with supervision and training of subordinate employees., • Have their own hand tools (Complete list)., • Follow requirements for utility locates and permits., • Fill out and turn in required personal and project paperwork., • Maintain a neat and professional appearance., • Communications with customers and other contractors., • Responsible for maintaining and renewing required certifications and licenses., • Provide their own transportation to and from work and/or be responsible for company assigned vehicle if provided and typically report to work at the job site., • Wear steel toe work boots when working on a construction site., • Wear Safety Vest and Hard Hat when on a job site., • Use proper PPE as required. EDUCATION, EXPERIENCE, SKILLS and ABILITIES: • High School Diploma or GED., • Minimum eight years combined experience as a Groundsman / Laborer, Maintenance Technician I or Construction Technician I, and Equipment Operator I. Some experience may be substituted with equivalent related construction or electrical experience., • Ability to operate gas torches (cutting and brazing)., • Must be proficient with basic hand tools and power tools., • Must be proficient at traffic signal wiring., • Must be familiar with MUTCD, NEC, CDOT, Local, Customer, and Project specific standards and specifications ., • Must be able to read plans and schematic diagrams., • Must be able to read survey stakes, elevations, and grades., • Must be familiar with basic communications systems, radio, fiber, hard wire, etc., • Ability to troubleshoot and repair simple problems., • Ability to efficiently supervise others, analyze and solve work problems, make decisions., • Ability to perform heavy physical work, often under adverse weather conditions., • Ability to follow and transmit clear written and verbal instructions., • Ability to communicate effectively with co-workers, supervisors, and the public., • Ability to maintain an effective working relationship with others. CERTIFICATIONS, LICENSES, REGISTRATIONS, and TRAINING: • Must possess and maintain valid Texas commercial driver’s license (CDL class A)., • Must be insurable., • Hazard Communications/MSDS, • Blood Borne Pathogens, Hantavirus, Respiratory Protection, • WL Bucket Truck/Aerial Lift, and Fall Protection., • WL Trencher, Excavation, and Utility Damage Prevention., • WL Crane and Rigging/Material Handling, • CDOT Flagger Certification, • IMSA Work Zone Safety certification or equivalent., • IMSA Traffic Signal Level I Certification. WORK ENVIRONMENT: • Must be able to work in all weather conditions., • Must be able to work at heights over 15 feet., • Must be able to lift/move up to 50 pounds., • Must be able to work nights COMPENSATION: This is a “Full Time” hourly position with the opportunity to advance. Pay range is between $25.00 to $30.00 per hour, depending on previous experience. The following benefits are included on the 1st day of the month following your date of hire: • Health, Dental, and Vision Insurance, • Basic Life Insurance & AD&D, • Health Care & Dependent Care Flexible Spending Account, • Short Term Disability – Long Term Disability, • 401(k) plan (with matching), • Paid Vacation, • Paid Holidays Lumin8 Transportation Technologies is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of age, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, gender identity, military or veteran status.

Job Description Excel is currently seeking Licensed Journeyman Electricians for a government-regulated project in Hastings, Nebraska. License Requirements Applicants must hold a current Nebraska Journeyman Electrician License or a valid license from one of the following reciprocating states: Alaska, Arkansas, Colorado, Idaho, Iowa, Minnesota, Montana, New Mexico, North Dakota, Oklahoma, South Dakota, Texas, or Wyoming. OSHA 10 certification is required. Essential Duties and Responsibilities Qualified candidates must be able to perform, but are not limited to, the following tasks: • Install cable, • Install channel tray, • Pull cable of various sizes locally and through facility pipe racks, • Terminate cable in panels, motors, boxes, and equipment, • Install junction boxes, RIO cabinets, lighting panels, and disconnect switches This is a government-regulated position that includes both a base rate and fringe rate: • Base Rate: $37.01/hour, • Fringe Rate: $18.99/hour, • Total Straight-Time Rate: $56.00/hour We offer a rich benefit package including: health, dental, and vision coverage to keep you and your family healthy; a 401(k) plan with employer matching; supplementary benefits including short and long-term disability; access to counseling services and mental wellness programs; a salary that reflects your experience and performance, and much more!

Job DescriptionSalary: $133k - $175k Are you passionate about shaping the future of humanity's presence in space? Lunar Outpost, an industry leader in space robotics and planetary vehicles, invites you to join our team! Lunar Outpost is dedicated to creating a permanent presence in space, while also driving positive impacts here on Earth. We are currently seeking a Crew Systems Lead to contribute to our mission in a dynamic startup environment. Lunar Outpost is seeking a capable, experienced Crew Systems IPT Lead to lead the development and integration of human-facing systems for a NASA Class A human spaceflight program. This position combines work at the forefront of commercial spaceflight with excellence in human spaceflight through delivery of a safe, reliable, and capable system for the lunar surface. As the Crew Systems IPT Lead, you will oversee a cross-functional team responsible for the end-to-end design, integration, and delivery of crew accommodations and interfaces. You will collaborate closely with human spaceflight stakeholders from NASA and the commercial industry, Lunar Dawn engineering teams across multiple disciplines, and subcontractors/suppliers to ensure that the LTVS solution meets rigorous human-rating and certification requirements. Take the #NextLeap with Lunar Outpost and work on the Lunar Terrain Vehicle (LTV), which will carry NASA astronauts farther than they've ever been before on the lunar surface! Key Responsibilities: • Serve as the technical and programmatic leader for the Crew Systems Integrated Product Team, accountable for performance, cost, and schedule, • Lead the development of Crew System hardware and software, including (but not limited to): displays and controls, seating and restraints, lighting, stowage, ingress/egress systems, and human-machine interfaces, • Collaborate closely and extensively with human spaceflight customers at NASA, across numerous human-related offices, to ensure a satisfactory Crew Systems solution, • Ensure compliance with all applicable NASA Class-A requirements, including human systems integration, safety, and certification standards, • Contribute to the definition and management of requirements, interfaces, and verification plans across internal and external stakeholders, • Coordinate technical work across mechanical, electrical, software, thermal, safety, and systems engineering disciplines, • Own the integration and validation of crew systems through design reviews, ground testing, and flight readiness milestones (e.g., CDR, FRR), • Support the development and delivery of training, procedures, and flight products related to crew system usage, • Champion a culture of safety, innovation, and mission success Required Qualifications: • Bachelors degree in aerospace, industrial, biomedical, or related fields of engineering or science, • Minimum of 11 years of experience in aerospace systems development, including 5+ years in technical leadership roles, • Demonstrated experience developing and integrating complex, human-rated systems, • Strong leadership, project management, and communication skills, • Familiarity with NASA systems engineering processes and human spaceflight certification requirements, • Able to simultaneously govern multiple, disparate tasks, • Able to operate under notable pressure within tight timelines, • Self-motivated, focused, and driven to meet critical deadlines, • Excellent organization and time management skills, • Excellent written and oral communication skills, • U.S. Person Preferred Qualifications: • Masters degree in an engineering or management discipline, • Experience supporting ISS, Artemis, Commercial Crew, or similar Class A human spaceflight programs, • Working knowledge of NASA-STD-3001 Vol 1 & 2, JSC 20793, or related human systems standards, • Experience with MBSE tools (e.g., Cameo, SysML) and digital engineering workflows, • Experience working in a fast-paced, agile environment with a startup or commercial aerospace culture, • PMP, INCOSE CSEP, or equivalent certification Any offer of employment for this position is conditional upon Lunar Outpost receiving the LTVS Phase II contract from NASA. If the contract is not awarded to Lunar Outpost, this offer will be considered null and void, without further obligation to Lunar Outpost. Lunar Outpost is an equal opportunity employer. We do not discriminate against protected characteristics (gender, age, sexual orientation, race, nationality, ethnicity, religion, disability, veteran status). We want all employees (including executives and HR) to treat others with respect and professionalism.

Job Description Sign Estimator – Broomfield Sign Company Would you like to be part of a growing, established sign company producing high-quality custom signage across Colorado and beyond? At Broomfield Sign Company, you’ll work alongside an experienced team in a fully equipped, 21,000 sq. ft. facility with in-house fabrication and installation capabilities. About Us Broomfield Sign Company, Inc. has been serving the Front Range since 1999. We’re known for delivering high-quality signage and building long-term client relationships, with consistent growth and repeat business year over year. The Role We are seeking an experienced Sign Estimator to join our team. This role is responsible for preparing accurate, timely estimates for a wide range of custom signage projects. Key Responsibilities: * Review drawings, specifications, and bid documents * Perform takeoffs and develop detailed cost estimates * Coordinate with sales, project management, and production teams * Communicate clearly with internal teams and vendors * Manage multiple bids and deadlines simultaneously Project Types You’ll be estimating a variety of custom projects, including: * Monument and pylon signs * Channel letters * Custom architectural elements and artistic signage Additional project examples can be viewed at: What We’re Looking For * Experience in sign estimating or a related industry * Strong understanding of signage materials, fabrication, and installation * Ability to read and interpret blueprints and construction documents * High attention to detail and strong organizational skills * Solid math and problem-solving abilities * Ability to manage multiple priorities in a fast-paced environment * Experience with national accounts, multi-site rollouts, or complex custom fabrication is a plus Tools & Technology * Monday.com * Casper (cloud-based sign industry software) * Microsoft Office Suite What We Offer * Competitive compensation (based on experience) * Flexible schedule * Paid vacation and holidays * Medical, dental, life, and Aflac coverage * SIMPLE IRA with 3% match * Ongoing training and development opportunities * Supportive, team-oriented culture Location Broomfield, Colorado — conveniently located between Denver and Boulder, with easy access to dining, shopping, and over 7,000 acres of open space. Why Join BSC? * Stable, growing company with strong leadership * Diverse and interesting project mix * Investment in technology and equipment * Opportunities for long-term growth Company DescriptionExperience Excellence with BSC Signs Where Craftsmanship, Teamwork, and Growth Come Together At BSC Signs, we bring brands to life through bold, custom signage—but what truly sets us apart is our team. Based in Broomfield, Colorado, we are a full-service sign manufacturing and installation company known for quality work, strong relationships, and a commitment to doing things the right way. We’re a growing company that values accountability, communication, and continuous improvement, and we’re building a team of people who take pride in their work and support each other. What We Do • Full-service signage: design, permitting, fabrication, and installation, • Licensed in 70+ municipalities with a dedicated permitting team, • In-house design using Adobe Creative Suite and 3D modeling, • High-quality fabrication using premium materials and advanced lighting What It’s Like to Work Here • Team-oriented environment with close collaboration between office and production, • Fast-paced, hands-on work with a variety of commercial projects, • Opportunities to grow as the company continues to expand, • Leadership focused on improving systems, processes, and long-term stability Whether you’re in the office or the shop, you’ll be part of a team that takes pride in delivering great work and continuously getting better.Experience Excellence with BSC Signs\r\nWhere Craftsmanship, Teamwork, and Growth Come Together\r\n\r\nAt BSC Signs, we bring brands to life through bold, custom signage—but what truly sets us apart is our team. Based in Broomfield, Colorado, we are a full-service sign manufacturing and installation company known for quality work, strong relationships, and a commitment to doing things the right way.\r\n\r\nWe’re a growing company that values accountability, communication, and continuous improvement, and we’re building a team of people who take pride in their work and support each other.\r\n\r\nWhat We Do\r\n\r\n* Full-service signage: design, permitting, fabrication, and installation\r\n* Licensed in 70+ municipalities with a dedicated permitting team\r\n* In-house design using Adobe Creative Suite and 3D modeling\r\n* High-quality fabrication using premium materials and advanced lighting\r\n\r\nWhat It’s Like to Work Here\r\n\r\n* Team-oriented environment with close collaboration between office and production\r\n* Fast-paced, hands-on work with a variety of commercial projects\r\n* Opportunities to grow as the company continues to expand\r\n* Leadership focused on improving systems, processes, and long-term stability\r\n\r\nWhether you’re in the office or the shop, you’ll be part of a team that takes pride in delivering great work and continuously getting better.

Job DescriptionJob Title: Commercial Journeyman Electrician Company: Elemental Commercial Services Location: Denver Metro / Front Range, Colorado, with travel to surrounding states Job Type: Full-Time Pay: $42.00–$50.00 per hour Travel: Required for select out-of-state jobsAbout Elemental Commercial Services Elemental Commercial Services performs commercial electrical work across tenant improvement, commercial new construction, industrial, and data center projects throughout Colorado and surrounding states. We are hiring a Commercial Journeyman Electrician who can install work safely, read plans, execute with minimal supervision, and contribute to a disciplined field culture. Position Summary This role is built for a licensed journeyman who knows commercial work, understands jobsite expectations, and can perform at a high level across tenant improvement, commercial new construction, industrial, and data center environments. You will work with foremen and project teams to deliver quality installations, maintain schedule, and mentor less experienced field personnel when needed. Key Responsibilities • Install conduit, cable tray, feeders, branch circuits, lighting, controls, gear, and associated electrical systems, • Read and work from blueprints, specifications, schedules, and electrical plans, • Perform layout, rough-in, trim, device installation, equipment hookups, and final punch work, • Maintain workmanship standards and deliver code-compliant installations, • Coordinate daily work with foremen, project managers, and other trades, • Identify jobsite issues early and communicate them clearly, • Support apprentices with training and field guidance, • Maintain clean, organized, and safe work areas, • Travel as required for assigned out-of-state projectsQualifications, • Current Journeyman Electrician license required, • Strong commercial and industrial electrical experience required, • Tenant improvement and commercial new construction experience required, • Data center experience preferred, • Ability to read plans and execute work independently, • Strong understanding of NEC and jobsite safety practices, • Valid driver’s license required, • Must be dependable, accountable, and willing to travel when neededBenefits, • Competitive pay: $42.00–$50.00 per hour, • Health benefits, • 401(k) with 4% company match, • Long-term opportunity across commercial, industrial, and data center projects Powered by JazzHR fvcn1m2KyX

Job DescriptionDescription: The RMH Group has been making a difference in the world and our environment through engineering for over 60 years with our headquarters located in Lakewood, Colorado and a branch office in Phoenix, Arizona. Our culture of learning and development will lead to continued growth as we place an emphasis on properly prioritizing work-life harmony while working on challenging engineering projects. Minimum of seven (7) years of design experience in the consulting engineering industry. Candidate will be responsible for technical performance as well as possess diversified knowledge of engineering principles and practices. Must have the ability to apply techniques, modifications and theories and have the ability to make decisions independently while still utilizing guidance from other engineers and project managers. Mentoring less experience team members is also an important facet of this position. We view every project as an opportunity to form a lasting partnership and we pride ourselves on our company culture. Essential Job Responsibilities Design mechanical systems for commercial buildings (project size will vary based upon experience) Takes ownership of all aspects related to project Responsible for small proposals and presentations to clients Responsible for producing change orders in regards to out of scope work Establishes and maintains relationships with clients for the firm Project manager for mechanical and electrical projects (project size will vary based upon experience) Resolves payment issues with clients Forecasts staffing needs for projects Plans and schedules project production coordinating with lead engineers Tracks and monitors budget, schedules and task lists Coordinates with internal team members such as engineers, admins, drafters Coordinates with external team members such as owners, architects, sub consultants Participates and/or leads meetings with clients/owners Skills Skilled in the use of Microsoft Office and CAD, BlueBeam and REVIT software Ability to communicate effectively Work collaboratively with others Requirements: Requirements Bachelor’s Degree in Mechanical Engineering or Architectural Engineering from an ABET accredited four-year college or university Prefer a minimum of seven (7) years building design experience in the MEP industry Registration as a Professional Engineer required and ability to obtain registration in Colorado Quality of Leadership Demonstrated leadership skills Promotes positive attitude, image Possesses excellent motivational skills Shows fairness and consistency; is decisive Shows good judgment and reasoning ability Takes initiative to set goals and works purposefully to achieve them Exhibits effective interpersonal skills – speaking, writing and listening Benefits & Culture Company-subsidized health, dental, vision Life insurance Short-term and long-term disability Health Savings Account Flexible Spending Accounts Healthcare Concierge Paid Time Off & Hybrid Work Schedules 401K & Bonus Opportunities Tuition Reimbursement Onsite Private Gym & Cafe Community Involvement Volunteer Opportunities Team Building Activities Professional Society Membership Support Internal and External Training Opportunities Professional Licensing Newly remodeled office with custom lighting and collaboration spaces Nestled on the edge of Golden with spectacular views and access to dining The RMH Group is a Denver-based mechanical, electrical, technology, sustainable, and industrial facility consulting engineering firm. We have been serving local, national and international clients for over 60 years. We view every project as an opportunity to form a lasting partnership and we pride ourselves on our family-type culture. Join our firm to make a difference in the world through engineering. RMH is proud to be a part of Equal Employment Opportunity (EEO), Affirmative Action (AA), and M/F/V/D employer programs.

Job Description Commercial Electrical Foreman Job Title: Commercial Electrical Foreman Company: Elemental Commercial Services Location: Denver Metro / Front Range, Colorado, with travel to surrounding states Job Type: Full-Time Pay: $45.00–$55.00 per hour Travel: Required for out-of-state jobs About Elemental Commercial Services Elemental Commercial Services delivers high-accountability electrical construction across tenant improvement, commercial new construction, industrial, and data center projects throughout the Denver Metro / Front Range and surrounding states. We are hiring a Commercial Electrical Foreman to lead field execution, build strong crews, and drive safe, on-schedule production. Position Summary This is a hands-on field leadership role for a proven electrical foreman who can run work, lead from the front, and hold the line on safety, schedule, workmanship, and accountability. The right candidate has strong commercial and industrial experience, understands tenant improvement and ground-up commercial work, and can step into data center environments with confidence. This role also supports preconstruction by assisting estimators with bid reviews and scope evaluation from plans. Key Responsibilities • Lead and supervise field crews on commercial, industrial, tenant improvement, commercial new construction, and data center projects, • Build, lead, train, and mentor electricians and apprentices in the field, • Plan daily and weekly work to maintain production, quality, and schedule performance, • Read and interpret blueprints, specifications, one-lines, panel schedules, and electrical plans, • Coordinate manpower, materials, tools, equipment, and installation sequencing, • Manage layout, rough-in, trim, feeders, branch circuits, lighting, controls, gear, and equipment installation, • Maintain jobsite safety, code compliance, and quality control standards, • Coordinate with project managers, general contractors, inspectors, vendors, and other trades, • Identify field issues early and drive practical solutions before they impact schedule or cost, • Assist estimators with bid support from plans, including takeoffs, scope reviews, and constructability input, • Manage inspections, punch lists, and closeout activities, • Travel as required for out-of-state workQualifications, • Journeyman or Master Electrician license required, • Strong experience in commercial and industrial electrical construction required, • Tenant improvement and commercial new construction experience required, • Data center experience strongly preferred, • Proven experience building, leading, and training crews, • Strong ability to read plans and translate drawings into field execution, • Experience assisting estimators with bids from plans, • Strong working knowledge of NEC, jobsite safety, and quality standards, • Valid driver’s license required, • Must be able and willing to travel for project workBenefits, • Competitive pay: $45.00–$55.00 per hour, • Health benefits, • 401(k) with 4% company match, • Company vehicle Powered by JazzHR mVrZ5pQx7w

Job DescriptionSalary: $55,000 - $90,000 DOE Set Construction Manager - Furniture Row Studio Denver, Colorado | Full-Time | $55,000 - $90,000 annually About This Opportunity Furniture Row is seeking a skilled Set Construction Manager to lead the design and construction of high-quality sets for our expanding studio production operations. This role combines expert-level carpentry and woodworking with production management, focusing on building broadcast-ready sets for HD photography and video content creation. You'll be responsible for constructing furniture-quality sets, managing studio operations, coordinating equipment and logistics, and supervising construction crews. This is an excellent opportunity for a master carpenter with production experience to take ownership of a state-of-the-art studio facility. What You'll Do Set Construction & Design • Design and build high-quality sets, furniture pieces, and scenic elements that look exceptional in HD filming, • Execute advanced finish carpentry and detailed woodwork meeting broadcast production standards, • Construct modular set pieces that can be reconfigured for different shoots and product displays, • Manage construction timelines to meet photography and video production schedules, • Coordinate set installation and striking operations with lighting and camera crews, • Supervise carpenters, painters, and day laborers during large productions, • Organize, catalog, and maintain all construction tools, studio equipment, and materials, • Manage workshop space, ensuring clean, organized, and efficient work environment, • Coordinate equipment and product transportation between studios, stores, and distribution centers, • Work with production teams to achieve the creative vision for furniture showcases, • Coordinate with store operations for product selection and transportation logistics, • Collaborate with photography and video teams on technical setup needs, • Support content creation workflows across all platforms What We're Looking For Required Qualifications • 5+ years of advanced carpentry experience with a portfolio of completed high-quality projects, • 2+ years of scenic construction experience in film, television, theater, or similar production environments, • Master-level woodworking skills, including joinery, finishing, and specialty construction techniques, • Project management experience managing timelines, budgets, and supervising crews, • Valid driver's license for delivery truck operation and equipment transport, • Expert use of hand and power tools including table saws, routers, chop saws, and specialty equipment, • Advanced knowledge of construction materials, structural integrity, and lightweight scenic techniques, • Ability to read and interpret blueprints, technical drawings, and construction specifications, • Experience with lifting equipment, rigging systems, and set installation procedures, • Trade school carpentry certification or completed apprenticeship, • Furniture making or high-end finish carpentry background, • Experience in retail display construction or commercial set building, • Knowledge of inventory management systems and equipment tracking, • Background in production coordination or technical theater operations What We Offer Compensation & Benefits • Competitive salary: $55,000 - $90,000 annually based on experience, • Performance bonuses for on-time, on-budget project completion, • Skills premiums for advanced certifications and specialized expertise, • Comprehensive health, dental, and vision insurance, • Pre-Tax Flex Spending Account, • 401(k) retirement plan with company matching, • PTO policy that begins accruing on day 1, • Paid Holidays, • Opportunities for advanced training and certification, • Access to cutting-edge tools and production equipment, • Career advancement potential within expanding media operations, • State-of-the-art studio facility with modern workshop equipment, • Collaborative team environment with creative professionals, • Variety in projects from intimate product shoots to large-scale productions, • Opportunity to see your work featured across multiple media platforms How to Apply Ready to build exceptional sets for a leading furniture retailer? Please submit: • Resume highlighting carpentry and production experience, • Portfolio showcasing your best construction and set building work, • Cover letter explaining why you're interested in this unique role, • References from previous employers or project collaborators Equal Opportunity Employer Furniture Row is committed to creating a diverse and inclusive workplace. We welcome applications from all qualified candidates regardless of race, gender, age, religion, sexual orientation, or disability status. Application Deadline: Open until filled Start Date: Immediate Location: Denver, CO 80216 Join our team and help create the visual stories that showcase America's favorite furniture brands!

Job DescriptionMister Sparky, an affiliate of Authority Brands, is excited to announce that were officially under NEW management and eager to add experienced licensed Electricians to our team in Northern Colorado. Our offices are conveniently located in Denver and Loveland. What can Mister Sparky offer you? • Competitive compensation that rewards your hard-earned experience., • Service vans, fuel cards, and iPads provided!, • A best-in-the-industry benefits package that includes generous PTO, health, dental, vision, and life insurance, and 401k with company match.Theres never been a better time to join our team! Responsibilities: • Assemble, install, test, and maintain electrical or electronic wiring, equipment, apparatus, and fixtures., • Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem., • Connect wires to circuit breakers, transformers, or other components., • Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, ensuring compliance with codes., • Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes., • Install ground leads and connect power cables to equipment., • Place conduit inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete the circuits between boxes., • Construct/fabricate parts; fasten boxes to wall to house electrical switches or outlets., • Provide preliminary sketches and cost estimates for materials and services., • Works closely with other departments to ensure the proper transfer of all service work business data., • Inspection of area for cleanliness after job completion respecting the customers property., • Maintains company vehicle, ensuring cleanliness and organization, both inside and out., • Always maintain a professional image. Qualifications:, • Must have a minimum of 3 years of verifiable experience as an electrician in a residential service and maintenance operation., • GED or High School Diploma., • Associate degree in related field preferred., • Basic math and reading comprehension., • Knowledge of electrical field concepts, practices, best practices, and procedures including the technical ability to understand and interpret Electrical Codes, Life Safety Codes, NFPA, Uniform Building Codes and Lighting Systems., • Solid communication and customer service skills., • Must have appropriate trade tools., • Valid drivers license and a clean driving record., • Ability to pass a background check and drug screenWe offer GREAT benefits, including a 401K with company match, company vehicle, training, room for advancement, and great earning potential. Authority Brands Inc. conducts drug screens and background checks on applicants who accept employment offers. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions; however, we do not sponsor visas at this time. Authority Brands Inc. is an Equal Opportunity Employer.

Job Description Overview Function as a Journeyman for Bergelectric Corp.; installing new electrical systems and repairing existing electrical systems while maintaining compliance with national, state and local electrical codes along with all Bergelectric Corp. policies and procedures. Support activities at commercial, industrial, institutional and residential locations. This is considered to be a safety sensitive position. Responsibilities • Install, repair, maintain, and test commercial, industrial and residential electrical systems in full support of Bergelectric Corp. safety, operations and productivity initiatives., • Use industry related hand tools and power tools., • Measure, cut, bend, thread, etc. and install wire and electrical cable systems, conduit systems and other wire raceway systems., • Feed to, pull into, and terminate wire and cable within control centers, distribution boxes, transformers, transducers, switch gear, receptacles, switches, etc., • Splice and terminate wires at junction points., • Troubleshoot equipment electrical systems and control circuits and build control panels from drawings., • Prepare sketches and schematic diagrams showing the location of wiring and electrical systems., • Delegate tasks and assist with training other employees., • Communicate effectively with Foremen and crew members., • Maintain workflow schedule to ensure all Bergelectric Corp. productivity objectives are met., • Demonstrate the highest level of professionalism and courtesy when interacting with colleagues, customers and vendors., • Adhere to all Bergelectric Corp.’s safety policies and procedures. Qualifications • Must hold a current Journeyman Wireman license (if required by the applicable state, city or county)., • Ability to install power systems: lighting, fire protection, security, and data network., • Ability to build and install control panels and provide maintenance to systems., • Experience using Electrical Single Line blueprints., • Experience finding and repairing faults in electrical apparatus and circuits., • Ability to verify compliance and functionality of installations., • Experience helping with the management of a project and crew., • Ability to manage material estimates., • Demonstrate strong leadership and pre-planning abilities.

Job Description$20.00-$22.00 COOK Compensation: -$20.00-$22.00. Not eligible for tips. Join for the Fun, Stay for the Career! If you are looking for a great place to work, have fun, and make money mate, click to apply. Come join the Outback family as an Outbacker where you will make memorable first and last impressions with all our customers. You will support our commitment to bringing the best of who we are to deliver perfectly tailored service to each and every guest. As an Outbacker, you’ll help to provide each customer with an AUS-SOME dining experience in the restaurant, that makes each guest’s day better. BENEFITS: • Comprehensive health insurance (medical, dental, vision) for employees eligible under ACA measurement rules., • A paid day off, after 90 days of employment., • Accrued Paid Sick Leave: up to 48 hours of paid sick leave per year, required under the Healthy, Families and Workplaces Act (HFWA). This benefit is for use of a variety of health- and safety-purposes, which employees “earn” at a rate of 1 hour of leave for every 30 hours worked., • Growth Opportunities! Shift Leader program with extensive on the job training., • Hospitable culture that recognizes hard work, effort, perseverance and leadership., • Closed Thanksgiving & Christmas Day to spend the day with family & friends., • Flexible Schedule., • Meal discounts., • Company sponsored Employee Assistance Program., • We are the largest franchisee of Outback Steakhouse., • Responsible for the preparation of food items. We have a diverse menu that requires speed and accurate preparation, and you should feel proud of each item you prepare., • Our Kitchen is well designed with large working areas. We have Line Cook positions in Salad, Fry, Sauté, Grill and Make Up, along with Kitchen Prep Cooks., • Responsible for maintaining equipment and the cleanliness of your surroundings in the kitchen., • Working as a team to achieve standards in preparation and delivery of food items., • Prepares food with proper safety equipment, tools, and recipe standards., • Restocks kitchen and cook line as needed., • Commitment to food safety, cleanliness, job safety and sanitation standards., • Ability to lift, carry or move up to 30 lbs., • Able to work in hot and cold environments., • Ability to walk and stand for extended periods of time, up to 8 hours per shift., • Frequent bending, reaching, kneeling, squatting and stooping., • Manual dexterity to handle glassware, utensils and technology systems., • Ability to move quickly in a fast-paced environment., • Visual ability to include distance, close, color, depth and peripheral. Also, the ability to adjust focus as needed. The role involves working in areas with low or dim lighting. All newly hired employees are subject to and must successfully complete the Electronic Employment Eligibility Verification Program (E-Verify). You can view the E-Verify Participation and Right to Work poster at ABOUT US: We are Out West Restaurant Group, the largest franchisee of Outback Steakhouse in the United States. Outback Steakhouse is an Australian theme restaurant that opened in March of 1988. At Outback Steakhouse we take food seriously, without forgetting the fun and we are proud to do things uniquely and strive to positively impact the lives of our people we call “Outbackers”. We believe if you treat people “Just Right” then success is sure to follow. It’s a culture of respect and camaraderie that breeds enthusiasm. We start with indulging each customer like a guest in our own home. We continue by committing to the success of each and every Outbacker to be trained to the best of their ability. Out West Restaurant Group is an equal opportunity employer. We do not discriminate based on race, color, religion, sex, national origin, age disability, or any other protected status. All employment decisions at Outback are based on business needs, job requirements and individual qualifications without regard to any characteristic protected by both federal and state laws. We are committed to fairness, respect and opportunity for all employees. Monitor 200 Award-Ranked in Top 50 Franchisees in the U.S., 4 years in a row. International Franchise Association’s Franchisee of the Year Award 2022, for Exemplifying Excellence in Local Community Service. Proud contributor to non-profit organizations, California Care and CORE. Both organizations do incredible work, providing essential support to restaurant employees and their families during challenging times. There is no fixed deadline for applying for this position.

Job DescriptionMantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility—inside and out—and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. • Do you thrive on building client relationships and closing high-value energy procurement deals?* Are you passionate about delivering innovative energy solutions that make a real impact?* Do you want to join a best-in-class team where your success is uncapped? If you answered yes, let's talk! GENERAL PURPOSE: We’re seeking a proven B2B sales professional with deep experience in energy procurement brokerage sales—specializing in electricity, natural gas, and green energy. As a Sales Executive on the energy team, you’ll play a critical role in driving new business growth and expanding our footprint into large key accounts (typically ~5,000 MWh and up). This is a consultative sales role, focused on building long-term client relationships and delivering solutions that help manage energy spend across procurement, efficiency strategies, and the full suite of Mantis offerings. Reports to: Director of Sales, Energy Key AccountsHybrid Schedule: 3 days in-office/week.Travel: 30-40% based on client meetings, events, etc.Outside Sales and Energy Advising, • Prospect, uncover, and develop strategies to secure new business opportunities., • Build and maintain a healthy pipeline of prospects and key energy accounts., • Conduct calls and face-to-face meetings daily with C-level decision makers., • Position solutions that optimize energy spend and deliver measurable value., • Analyze and report customer positions and commodity contract performance., • Collaborate with internal teams to ensure seamless execution and client satisfaction., • Maintain accurate records in Salesforce and other CRM tools., • Exceed sales goals consistently and contribute to overall market share growth.QUALIFICATIONS, • 5–10 years selling B2B electricity, natural gas, or green energy contracts (supplier or broker backgrounds welcome)., • Multi-year track record of exceeding individual quotas (~$1M+), • Strong proficiency in Microsoft Office and CRM systems., • Demonstrated ability to sell into multiple levels of an organization.COMPETENCIES, • Hunter and closer mentality with exceptional networking and cold-calling skills., • Strategic and tactical selling expertise with new prospects., • Excellent communication, negotiation, and presentation skills., • Highly organized with the ability to manage multiple priorities in a fast-paced environment., • Consultative approach to building long-term client relationships.

Job DescriptionJoin Our Denver Team as an Experienced Industrial Mechanic!We’re looking for a skilled mechanic to join our second-shift team at our Denver plant. If you have experience maintaining and repairing high-speed industrial machinery in a production environment, we want to hear from you!Shift Details: • Second Shift Hours: 2:00 PM to 10:45 PM, Monday through Friday, • Pay: $26.50 - $35.00+/hr. Potential for more based on experience.What You’ll Do:, • Perform preventative maintenance on industrial machinery, engines, motors, pneumatic tools, and production machines following manuals, diagrams, and engineering specifications., • Troubleshoot and repair hydraulic, pneumatic, and mechanical systems, including gearboxes and electrical controls., • Fabricate repair parts using machine shop instruments and equipment as needed., • Provide mechanical maintenance recommendations to improve reliability., • Ensure a safe work environment, following PPE and lock-out/tag-out procedures., • Operate a forklift (certification required)., • Perform basic facility repairs, including plumbing, lighting, and HVAC., • Work closely with the Maintenance Manager, engineering, and production teams to coordinate repairs.What We’re Looking For:, • Experience: 5+ years in an industrial, manufacturing, or production environment., • Skills: Hands-on experience with hydraulic, pneumatic, and mechanical repairs with strong troubleshooting ability., • Education: Associate’s degree or equivalent technical training preferred, or a combination of education and experience., • Ability to read and interpret schematics and technical diagrams., • Basic computer skills, including department programs, scanning systems, and touchscreens., • Mathematical ability to work with whole numbers, fractions, and decimals., • Reasoning skills to apply mechanical knowledge in troubleshooting breakdowns.Physical & Work Environment:, • Frequent standing, walking, and lifting (up to 50 lbs)., • Work around moving machinery, loud noise, and varying conditions., • Must be comfortable operating a forklift and handling tools., • Reasonable accommodations may be made for individuals with disabilities.Why Join Us?At CEMCO, we value safety, efficiency, and teamwork. Join us for a supportive work environment with opportunities to grow your skills in industrial maintenance.

Job Description Join Team Royal! Why Royal? At Royal Electric Company we provide expert electrical design, construction, and service with builders, contractors and facility owners who value relationships, trust, expertise, and a commitment to each other towards achieving exceptional results. We believe in transforming the culture of construction, creating a space where everyone feels they belong. We are proud to support initiatives like "Breaking Barriers," showcasing the incredible contributions of women in our industry. Breaking Barriers: Women At Work Episode 1 We are able to sustain this through our linking values of expertise, collaboration, integrity, passion, and loyalty. These values support our core purpose; to build great relationships, one project at a time! We believe in taking care of our team. From comprehensive wellness programs to continuous learning opportunities, we invest in your growth and well-being. One Royal Culture Short Story We currently have an opening for a Project Engineer role that can be based out of Dallas, TX, Denver, CO, or Austin, TX. This position will support airfield infrastructure projects at Dallas–Fort Worth International Airport, Denver International Airport, or Austin-Bergstrom International Airport, depending on the selected location. The Project Engineer will focus on airfield infrastructure projects in the surrounding region and will be an integral part of the project management team overseeing critical airfield operations, including taxiway and runway lighting, edge lights, associated systems, and more. Success in the position is achieved through the following duties & responsibilities: • Manage document control between job folders and PlanGrid., • Perform take offs for lighting and power counts., • Assist with job start-ups including procuring a jobsite trailer and office material, identify vendors in job site area, and work with accounting to set up new vendors if needed., • Understand the project’s schedule including deliverables and milestones. Assist in the development with project team., • Prepare commodity submittals, review long lead submittals, prepare RFIs and CORs, track documentation of submitted/returned, and closeout documents., • Process material orders/Subcontractor T&C and ensure phase codes are being assigned., • Assist project team with deliveries to site or shop., • Follow up with vendors regarding long lead items and tracking procurement., • Collect production data from field and input into production and quantity tracking so information is timely and accurate., • Resource for Foreman, Field Engineer, Project Manager, and Superintendent, • Build and maintain relationship with General Contractors and/or Project Owners, Subcontractors, and vendors that promote project success. Education & Experience: • Bachelor’s degree in a relevant field with at least 3 years of related experience, or equivalent combination of technical training and related experience., • Construction management experience is a plus., • Understand the construction process from office to field., • Understand the estimating process; electrical estimating preferred., • Proficient computer skills including Microsoft Office Suite, Bluebeam, Procore., • Experience working with a scheduling platform preferred; P6, Planner, etc., • Demonstrates strong written and verbal communication skills., • Ability to work with a team and independently., • Demonstrates strong attention to detail, time management abilities and organizational skills., • Ability to work on projects concurrently., • Ability to maneuver between office and jobsites., • Airport and/or Underground experience a plus, • $64,480.00/year - $90,000/year We offer competitive wages plus benefits and 401(k). Royal is proud to be an equal opportunity workplace. Individuals seeking employment at Royal are considered without regards to age, ancestry, color, race, gender (including pregnancy, childbirth, or related medical conditions), gender identity or expression, sexual orientation, genetic information, marital status, medical condition, mental or physical disability, national origin, protected family care or medical leave status, religion, military or veteran status, or any other characteristic protected by federal, state, or local laws. Applicants must be authorized to work in the United States. Royal Electric is unable to sponsor or take over sponsorship of employment Visa at this time. We utilize E-Verify to confirm work authorization with both the Social Security Administration and the Department of Homeland Security. E-Verify Link: We promote a drug free workplace. Benefits • Health Care Plan (3 types of Medical plans, Discounted Dental & Orthodontist services for adults & children, Premium Vision Plan), • Retirement Plan (Traditional 401k, Roth 401k)., • $50k Life Insurance (Basic, Voluntary, & AD&D), • Paid Time Off (Vacation, Sick Leave, and 8 Paid Holidays), • Family Leave FMLA (Maternity & Paternity), • Short Term & Long-Term Disability, • Pet Insurance, • Flex Spending Accounts: Healthcare, Dependent care (Daycare children & elderly – work related), & Transit, • Pharmacy discounts, • Kisx Card (Surgery & Imaging Program), • Opportunity for tuition reimbursement, • Wellness Resources, • Free telehealth, • Health Joy App, • Free peer coach support - (mental health, stress management, substance use, and suicidal ideation), • CancerCARE 1:1 Consulting and support with expert medical team, • Employee Assistance Support, • Hearing Aid discount plan, • Laser VisionCare discount plan, • Learning & Development, • Safety training: Getting Everyone Home Safely, • Professional & Leadership Development Training, • Skill Development Training, • Mentorship Program, • On-The-Job & Classroom Training, • Employee Referral Program: We value referrals from our employees! If you know someone who would be a great fit for this role, please refer them through our company’s referral program. Successful referrals can earn you an incentive!, • Join our Talent Community: Stay updated on job openings, career tips, and exclusive hiring events. You’ll also receive resources to help you grow professionally. Sign up now to stay connected with Royal and be the first to know about new opportunities!

Job Description Application Window: Applications are accepted on an ongoing basis. To apply, fill out the general application form at carltonelectric.com. NOTICE: Experienced apprentices are required to provide an affidavit of hours from previous employers to be compensated accurately. It is the employee’s responsibility to collect this documentation and provide it to Carlton Electric, Inc. General Overview A second – fourth year electrical apprentice is responsible for various electrical installation tasks including installing raceways, pulling wire, mounting equipment, installing and completing finished electrical products such as lights and switches and more. All tasks are to be completed under the guidance of a licensed journeyman electrician and on the job training will be provided. Second-fourth year apprentices are expected to work diligently both on the job and on their schooling to gather the proper and required knowledge and experience for becoming a qualified journeyman electrician. Responsibilities • Maintains compliance with all OSHA, Carlton Electric and other customer safety requirements and policies., • Actively works to acquire the skills and knowledge required to be a successful electrician via on the job training, mentoring and classroom work., • Completes work with a focus on safety, quality, and a sense of urgency., • Performs semi-skilled and unskilled laboring duties related to the installation, maintenance, and repair of a wide variety of electrical systems and equipment., • Uses various hand tools, site tools and safety equipment as needed on the job site., • Maintain tools and equipment and keep parts and supplies in order., • Develops a working understanding of blueprints., • Develops a working knowledge of circuitry and electrical theory., • Develops a basic understanding and working understanding of the national electrical code, depending on previous experience., • Develops a basic understanding and working understanding of lighting control systems depending on previous experience., • Develops a basic understanding and working understanding of fire alarm systems depending on previous experience., • Dig trenches for running underground electrical systems., • Performs with wire and cable pulls., • Assists with material handling duties on the jobsite., • Troubleshoot electrical issues with wiring and equipment, depending on level of knowledge and experience., • Performs other related duties as required and assigned., • Must have at least 2,000 recorded hours for a second year apprentice; at least 4,000 recorded hours for a third year apprentice; at least 6,000 recorded hours for a fourth year apprentice., • Must be at least 18 years of age., • Must have a reliable transportation method., • Must be able to pass a drug screen at any given point in time., • Must be able to pass a background check., • Must possess mechanical and technical aptitude and a passion for working with your hands., • Must demonstrate a focus on safety, quality, and goal attainment., • Must be self-motivated, teachable, punctual, respectful, able to follow directions and be an ideal team player., • Must be able to acquire all necessary required tools and proper clothing before the first day on the job. Tool investment for the first day averages around $250. Additional tool investment within 30 days averages around $500. Additional tool investment within first 60 days averages around $275. Final tool investment within 90 days averages around $375. Total tool investment for first year averages around $1,400. Initial clothing investment averages around $400. Employees can expect to spend around $200-$700 per year in replacement tool and clothing expenses., • OSHA 10 certified preferred., • Sitting – ability to remain in normal and abnormal seated position for prolonged period., • Kneeling – ability to remain in a kneeling position, either one knee or both, for a prolonged period of time., • Standing – ability to stand on one’s feet with little to no movement for a prolonged period., • Walking – ability to move around on one’s feet for long period of time, often without breaks. Must be able to walk at speeds of at least 3 miles per hour., • Lifting – up to 50 pounds., • Carrying – up to 50 pounds., • Bending- ability to bend at waist, hips, and knees, sometimes for a prolonged period., • Pushing – up to 50 pounds., • Pulling – up to 50 pounds., • Ability to work on and maneuver a ladder safely, both 3 legged and extension ladders for a prolonged period., • Possess the ability to talk., • Possess the ability to hear well either naturally or with correction., • Possess the ability to see well either naturally or with correction., • Possess the ability to focus and concentrate on a task for long periods of time., • Ability to maintain a calm and focused mental state, especially in high-pressure or emergency situations., • Capacity to think clearly, rationally, and quickly when troubleshooting electrical systems or responding to unexpected issues., • Capable of managing stress effectively, maintaining composure and focus throughout the workday., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job., • Working conditions can vary greatly depending on job site and time of year. You must be able to perform your work in hot, cold, muddy, wet, humid, windy, and dry conditions., • Field employees are always required to wear required personal tools while working., • Ability to work from different heights including, but not limited to, on step ladders, A-frame ladders, extension ladders, and ariel lifts., • Potential to work in restricted areas such as manholes, utility tunnels, crawl spaces, trenches, attics, vaults, switchgear rooms and more., • All employees must always wear personal protective equipment on the job site including, safety boots, hard hats, safety glasses, gloves, masks, and ear plugs., • Potential to work overtime and night shifts, sometimes on short notice., • Must be okay with working in areas ranging, but not limited to Colorado Springs to Fort Collins. Qualifications • Must have at least 2,000 recorded hours for a second year apprentice; at least 4,000 recorded hours for a third year apprentice; at least 6,000 recorded hours for a fourth year apprentice., • Must be at least 18 years of age., • Must have a reliable transportation method., • Must be able to pass a drug screen at any given point in time., • Must be able to pass a background check., • Must possess mechanical and technical aptitude and a passion for working with your hands., • Must demonstrate a focus on safety, quality, and goal attainment., • Must be self-motivated, teachable, punctual, respectful, able to follow directions and be an ideal team player., • Must be able to acquire all necessary required tools and proper clothing before the first day on the job. Tool investment for the first day averages around $250. Additional tool investment within 30 days averages around $500. Additional tool investment within first 60 days averages around $275. Final tool investment within 90 days averages around $375. Total tool investment for first year averages around $1,400. Initial clothing investment averages around $400. Employees can expect to spend around $200-$700 per year in replacement tool and clothing expenses., • Sitting – ability to remain in normal and abnormal seated position for prolonged period., • Kneeling – ability to remain in a kneeling position, either one knee or both, for a prolonged period of time., • Standing – ability to stand on one’s feet with little to no movement for a prolonged period., • Walking – ability to move around on one’s feet for long period of time, often without breaks. Must be able to walk at speeds of at least 3 miles per hour., • Lifting – up to 50 pounds., • Carrying – up to 50 pounds., • Bending- ability to bend at waist, hips, and knees, sometimes for a prolonged period., • Pushing – up to 50 pounds., • Pulling – up to 50 pounds., • Ability to work on and maneuver a ladder safely, both 3 legged and extension ladders for a prolonged period., • Possess the ability to talk., • Possess the ability to hear well either naturally or with correction., • Possess the ability to see well either naturally or with correction., • Possess the ability to focus and concentrate on a task for long periods of time., • Ability to maintain a calm and focused mental state, especially in high-pressure or emergency situations., • Capacity to think clearly, rationally, and quickly when troubleshooting electrical systems or responding to unexpected issues., • Capable of managing stress effectively, maintaining composure and focus throughout the workday., • Working conditions can vary greatly depending on job site and time of year. You must be able to perform your work in hot, cold, muddy, wet, humid, windy, and dry conditions., • Field employees are always required to wear required personal tools while working., • Ability to work from different heights including, but not limited to, on step ladders, A-frame ladders, extension ladders, and ariel lifts., • Potential to work in restricted areas such as manholes, utility tunnels, crawl spaces, trenches, attics, vaults, switchgear rooms and more., • All employees must always wear personal protective equipment on the job site including, safety boots, hard hats, safety glasses, gloves, masks, and ear plugs., • Potential to work overtime and night shifts, sometimes on short notice., • Location: Denver Greater Metro Area/Front Range (Fort Collins to Colorado Springs), • Start Date: TBD, • Status: Full-Time, Non-Exempt, • Schedule: Normal working hours of Monday-Friday 7AM – 3:30PM. This position may offer or require overtime, weekend, or holiday work., • Other financial benefits: This position may be eligible for, but not guaranteed a yearly bonus., • Health Insurance: Multiple coverage options available for employee and family., • Dental Insurance: Coverage options available for employee and family., • Vision Insurance: Coverage options available for employee and family., • Employee assistance program., • Short-term and long-term disability insurance available., • Life insurance and voluntary life insurance available., • Paid Holidays, • Paid Time Off, • 401K with company match. Roth and traditional options available. Carlton Electric does not discriminate against any protected category when determining salary and compensation for an employee.

Job DescriptionMantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility—inside and out—and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. *Do you thrive on building client relationships and closing high-value energy procurement deals? * Are you passionate about delivering innovative energy solutions that make a real impact? * Do you want to join a best-in-class team where your success is uncapped? If you answered yes, let's talk! General Purpose: We're seeking a skilled B2B sales professional with experience in energy procurement brokerage or supplier sales - specializing in electricity, natural gas, and green energy. As a Sales Executive on the energy team, you’ll play a critical role in driving new business growth and expanding our footprint into small and medium-sized business accounts (typically 50-5,000 MWh) This is a high-volume sales role, focuses on heavy cold calling and outreach to build client relationships and deliver solutions that manage energy spend across procurement, energy efficiency, and the full suite of Mantis offerings.Outside Sales and Energy Advising • Prospect, uncover, and develop strategies to secure new business opportunities., • Build and maintain a high-volume pipeline of prospects and SMB energy accounts., • Conduct calls and face-to-face meetings daily with client decision makers., • Position solutions that optimize energy spend and deliver measurable value., • Analyze and report customer positions and commodity contract performance., • Collaborate with internal teams to ensure seamless execution and client satisfaction., • Maintain accurate records in Salesforce and other CRM tools., • Exceed sales goals consistently and contribute to overall market share growth.Qualifications, • 5 years selling B2B electricity, natural gas, or green energy contracts (supplier or broker backgrounds welcome)., • Sales track record of exceeding individual quotas ($300k), • Strong proficiency in Microsoft Office and CRM systems, • Demonstrated ability to sell into multiple levels of an organization.Competencies, • Hunter and closer mentality with strong networking and cold-calling skills., • Strategic and tactical selling expertise with new prospects., • Strong communication, negotiation, and presentation skills., • Highly organized with the ability to manage multiple priorities in a fast-paced environment., • Advanced sales and client success approach., • Results-driven mindset with relentless focus on exceeding targets.Reporting, Schedule and Travel, • Reports to Director of Sales, Energy SMB Accounts, • Hybrid Schedule: 3 Days in-office/week

Job Description Prizm Electrical Solutions, Inc. is hiring a Traveling Licensed Electrical Journeyman to join our team in Denver, CO. This position can independently work lighting, power, and control systems within commercial and industrial facilities. They understand, interpret, and implement NFPA70 NEC and will work in multiple states. Candidates must take extreme pride in their work and value positive company culture and perpetual internal growth. Prizm Electrical Solutions, Inc. is a Colorado-based electrical design-build contractor specializing in industrial, heavy commercial, water/wastewater, data centers, electrical service, and maintenance. Our expertise propels our ability to provide innovative construction methods, value engineering, and solution-oriented project management. Prizm Offers: • A Full-Time Stable Career Opportunity offering Competitive wages, • Medical Insurance 100% Paid by Employer, • Life Insurance, • Interprets technical drawings and schematics, specifications, and submittals to determine layout of electrical systems, • Leads compliance with OSHA and other applicable standards, • Follows direction from Project Leadership, • Ensures high quality installations of all electrical equipment and components, • Installs and repairs wiring, electrical fixtures, power equipment, and components of machinery and equipment following NEC, • Operates a variety of hand tools including core drill, hammer drill, drill motors, KO sets, conduit benders, and conduit threaders, • Perform underground and overhead electrical installations, • Diagnoses and troubleshoots wiring and components, • Assists with crew productivity, • Facilitates order of needed electrical components, • Inspect tasks upon completion and ensure areas are clean, • Electricians risk injury from electrical shock, falls, and cuts; to avoid injuries, they must follow strict safety procedures. Education and Experience: • Valid state license that permits you to practice as a journeyman electrician, • Excellent critical thinking skills, • Observant and thorough, • An active listener with top-notch verbal and written communication skills Physical Requirements: • Physically fit and capable of carrying up to 50 pounds., • Frequently work on manlifts, ladders and scaffolds., • Working environment varies, depending on the type of job. Including, but not limited to natural ambient conditions, confined areas, ditches, or other uncomfortable places., • Operates construction equipment, including, forklifts, backhoes, and cargo trucks., • Work weeks are typically 40 hours with project specific overtime, as needed. Pay: $35.00 - $50.00 per hour Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Project specific per diem, • Project specific safety bonuses, • Driver's License (Required), • Valid state license that permits you to practice as a journeyman electrician Along with the usual protocols to protect our employees, vendors, and partners, we've implemented additional safety standards, specifically in response to minimizing the possibility of transmission of the COVID-19 virus. Along with CDC recommended guidelines, we've established procedures to reduce exposure and susceptibility. These include providing personnel with appropriate PPE, added cleaning protocols, and encouraging open lines of communication for feedback, questions, and concerns. Prizm Electrical Solutions, Inc. is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other status protected by applicable law

Job DescriptionPosition Description: The Receptionist will manage a multi-line phone system, greet and direct guests, visitors and clients, and manage general office upkeep. This individual is the initial contact person at OZ and should represent the professional nature of the office. General administrative support is provided to staff as requested and includes tasks that can be done while at the reception desk.Qualifications: High school diploma required; college degree preferred. 12 years of experience in a professional office environment preferred. Experience operating a multi-line phone system. Proficiency with Microsoft Office Suite; familiarity with Deltek Vantagepoint is a plusResponsibilities:Receptionist Responsibilities:Professionally and hospitably greets and welcomes guests, clients and staff to our office space. Build strong relationships with colleagues and frequent visitors, knowing names if possible. Manage incoming phone calls on multi-line phone system including screening and transferring calls appropriately. Basic understanding of Deltek Vantagepoint for entering and searching for basic project data. Coordinates couriers and FedEx/UPS services. Assists with postage and mail as needed. Accepts incoming deliveries, notifies recipients and stores items near the supply room. Maintains the reception area, galley, lobby, supply/mail center, postage machine, and surrounding conference rooms by keeping areas clean, stocked and organized.Office Operations Support: Coordinates conference room meeting set-up, breakdown and clean up. Follows assigned tasks on the Admin Task list and other duties that may be assigned. Order, set up, and organize lunches for meetings. Maintains office plants.Coordinates office cleaning contract, crew and cleaning supplies with oversite as needed. Order and manage office beverages and snacks. Maintains inventory and procurement of office supplies Support kitchen and common area cleanliness (running dishwashers, wiping counters, restocking, etc.). Handles routine requests, including facilities requests from staff. Coordinates with building vendors/contractors including janitorial, electrical, HVAC, etc. (i.e., building temperature, lighting, equipment failures). Perform general office upkeep such as collecting dirty dishes, restocking items, cleaning up meeting lunches, and ensuring spaces remain presentable. Manage all issues related to office upkeep (working with building management to resolve any fixes in the offices, etc) Distribute/Re-Issue RTD Eco-passes, parking information and communicates with IT on new hire needs. Prepare new-hire desks and Orients new employees on facilities rules/processes. Helps with project archiving and file searches upon request Other duties may be assigned. How to Apply: Please submit your online application with an uploaded resume for your application to be complete. Applications without a resume will be considered incomplete. Here at OZ, we have cultivated a culture of fearless creators that are constantly seeking ways to push the boundaries of exceptional design. Community stewardship is a cornerstone of our company values, and we are committed to several community service programs through OZ Gives. We offer a variety of health and wellness resources and activities, as well as regular employee events, to build rapport and socialize with each other outside of our important project work. Our collaborative approach is enhanced by our in-office presence and provides hands-on mentorship and team building. One of the perks of working in the office is seeing all the friendly pups who accompany their humans - we are a dog-friendly environment. Our competitive benefits package includes medical, dental, wellness, and vision plans to allow our employees to choose what's best for them and their families. In addition, OZ offers LTD, Life Insurance, 401K, and PTO. Hourly: $21 - $23, depending on knowledge, skills, and experience. $21.00 - $23.00 Hourly

Job Description Now Hiring: Freelance Event & Production Crew – Denver, CO Pay: $25–$36/hr (based on role & experience) Start: June 2026 | Freelance, Project-Based Work Who We Are Odeum Labor Services (OLS) is a national provider of skilled labor for live events, theater, immersive experiences, and experiential builds. Founded through the merger of Mind the Gap Labor Services and TINC Productions, we bring more than 30 years of expertise to every project. Our crews support everything from theatrical builds and concerts to large-scale marketing activations, corporate events, and immersive experiences. We install scenic and technical elements such as staging, lighting, sound, temporary structures, event furniture, and branded environments. At OLS, we believe projects succeed when crews are respected, fairly paid, and properly supported. Our in-house project managers handle logistics and communication — so our freelance professionals can focus on delivering exceptional work on-site. We don’t just fill shifts. We build crews. Roles We’re Hiring: • Carpenters, • Finish Carpenters, • Painters What You’ll Need • Prior experience in live events, scenic installs, or production labor, • Transportation to and from job sites in the Denver, CO area, • Professional attitude and reliability, • OSHA or equipment certs are a plus (not required) Why Work With Odeum? • Competitive pay: $25–$36/hour, • Straightforward communication & scheduling, • Real project support from a team that’s been on-site, • Opportunity for ongoing work across the region Apply Today Email your resume, availability, and location to: Know someone great? Send them our way or forward this post. Job Type: Part-time Pay: $25.00 - $36.00 per hour Expected hours: 5 – 40 per week Work Location: In person Company DescriptionOdeum Labor Services (OLS) was born from the backstage world. Founded in 2024 through the merger of Mind the Gap and Tinc Productions labor divisions, we bring 30 years of "in the trenches" experience to the market. We provide the skilled technicians, leads, and crews that make events, permanent installations, and brand activations happen.Odeum Labor Services (OLS) was born from the backstage world. Founded in 2024 through the merger of Mind the Gap and Tinc Productions labor divisions, we bring 30 years of "in the trenches" experience to the market. We provide the skilled technicians, leads, and crews that make events, permanent installations, and brand activations happen.

Job Description Overview Function as a General Foreman for Bergelectric Corp.; managing the labor, materials, and production for electrical construction projects. Provide technical expertise in installing and troubleshooting electrical wiring and equipment. Work cooperatively with the general contractor and/or customer in managing the project, project schedule and employees. Monitor installations and ensure work is performed according to Bergelectric Corp. standards and project specifications. This is considered to be a safety sensitive position. Responsibilities • Responsible for supervision of all field production activities; Aid the Foreman in planning the job, ordering materials and workforce., • Work with appropriate Project Managers and Superintendents to establish project goals at the project's beginning and monitor success in reaching those objectives on an ongoing basis., • Review and monitor labor efficiencies, hours, and ratios. Project the labor needs for the duration of the project. Maintain the project schedule and update weekly., • Monitor codes and specifications, installation methods., • Prepare, review, distribute and/or maintain all required installation documentation., • Provide leadership and guidance to sub-Foremen., • Work with the appropriate Project Managers and Superintendents to track and monitor material costs, storage, consumed and ordered to identify potential problems while minimizing cost and overruns to Bergelectric Corp., • Achieve Bergelectric Corp. productivity objectives by effectively managing and assigning tasks to crew members, while accurately maintaining the project labor tracking report. Communicating labor tracking status with other key project personnel., • Utilize a proactive approach to anticipate and resolve potential issues., • Ensure the proper safety equipment, materials and tools are onsite to perform the required work., • Maintain complete and accurate “as-builts” as per Bergelectric Corp. procedures and project requirements., • Communicate effectively with a wide range of individuals including project owners, architects, general contractors, management, crew members, etc., • Adhere to project contract document changes and Bergelectric Corp. change order notice-to-proceed policies., • Adhere to all Bergelectric Corp., state and federal safety policies and procedures., • Ensure all work performed meets with NEC, federal, state, county, local codes, and contract documents., • Provide leadership in fostering a teamwork environment in all aspects of job responsibilities., • Monitor and focus on employee / crew morale to ensure positive outcomes of all situations., • Ensure compliance with all policies and procedures included in the Bergelectric Corp. Employee Handbook. Qualifications • A minimum of three to five years of experience working as an Electrical Foreman/General Foreman or in a similar role in electrical construction, design, and cost management for commercial or industrial projects., • Must hold a current Journeyman Wireman license (if required by the applicable state, city or county)., • Advanced abilities in reading and interpreting electrical plans and specifications with in-depth knowledge of the NFPA codes., • Demonstrated track record of successful project leadership with experience managing sub-Foremen., • Capable of managing any type of private or public sector electrical construction project including new construction, tenant improvements, etc., • Solid understanding of the electrical codes and installation methods., • Well-versed in the installation of power systems: lighting, fire protection, security, and data networks., • Knowledgeable regarding the build, installation, and maintenance of control panels., • Comfortable utilizing Electrical Single Line blueprints., • Experience in verifying the compliance and functionality of installations., • Knowledgeable in the identification and repair of faults in electrical apparatus and circuits., • Demonstrated ability to effectively order and track materials, perform cost projections and develop “as builts”., • Strong knowledge and experience related to scheduling, material lead times, product knowledge and installation durations.

Job Description Application Window: Applications are accepted on an ongoing basis. To apply, fill out the application on carltonelectric.com. General Overview A Journeyman Electrician is responsible for safely and accurately installing, repairing, and maintaining electrical systems across commercial projects. This includes installing raceways and cable systems, pulling wire, mounting, and terminating equipment, and delivering high-quality finished electrical work such as lighting, devices, and fixtures. Journeymen are also expected to provide guidance and training to apprentices, lead small crews when assigned, and help ensure work is completed efficiently, correctly, and in compliance with code and company expectations. Responsibilities -Maintain full compliance with OSHA, Carlton Electric, and customer safety requirements and policies. -Perform all work with a focus on safety, quality, efficiency, and professionalism. -Execute skilled tasks related to installing, maintaining, and repairing a wide range of electrical systems and equipment. -Properly use and maintain hand tools, power tools, jobsite equipment, and required PPE. -Train and guide apprentices in the safe and proper use of tools, equipment, and installation methods. -Maintain tools, equipment, parts, and materials in clean, organized working order. -Demonstrate working knowledge of special systems, including lighting controls and fire alarm systems. -Read and interpret blueprints, drawings, and specifications using Bluebeam or other digital platforms. -Apply working knowledge of circuitry, electrical theory, and the National Electrical Code (NEC). -Bend, install, and support conduit systems. -Perform trenching and installation of underground electrical systems. -Pull wire and cable according to project requirements and industry standards. -Troubleshoot wiring, components, and equipment issues based on experience and skill level. -Perform other related duties as assigned. Qualifications -Must possess a valid Colorado Journeyman Electrician (JW) license. -Must demonstrate strong professional communication and customer service skills, both verbal and written. -Must be able to pass a drug screen at any time. -Must be able to pass a background check. -Must be self-motivated, teachable, punctual, respectful, and able to follow direction; demonstrates the qualities of an ideal team player. -Must have personal hand tools and required power tools necessary for commercial electrical work. -Proficiency with digital construction tools preferred; experience with Bluebeam is a plus. -Ability to lead, mentor, and train apprentices as needed. -Ability to read and interpret blueprints, schematics, and electrical diagrams. -Strong understanding of the National Electrical Code (NEC). -Demonstrated competency in bending, installing, and supporting conduit systems. -Working knowledge of special systems, including fire alarm, lighting controls, and low-voltage support as applicable. -Ability to work independently with minimal supervision and as part of a team. -Must have reliable transportation to and from various job sites in Colorado. Physical Demands -Sitting, standing, kneeling, walking for prolonged periods of time. -Be able to walk at speeds of up to 3 miles per hour. -Lifting, carrying, pushing, pulling – up to 100 pounds. -Ability to bend at waist, hips, and knees, maneuver on a ladder (3/4 legged and extension ladders) for a prolonged period. -Must wear personal tools while working (tool harness, or belt, can weigh up to 50 lbs). -Possess the ability to talk, hear, and see well either naturally or with correction. -Possess the ability to focus and concentrate on a task for extended periods of time. -Ability to maintain a calm and focused mental state, especially in high-pressure or emergency situations. -Capacity to think clearly, rationally, and quickly when troubleshooting electrical systems or responding to unexpected issues. -Capable of managing stress effectively, maintaining composure and focus throughout the workday. -Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. Working Conditions -Sometimes hot, cold, wet, muddy, humid, windy, and dry conditions depending on time of year. -Must wear personal tools while working (tool harness, or belt). -Ability to work from different heights such as on ladders and lifts. -Potential to work in restricted areas such as manholes, utility tunnels, crawl spaces, trenches, attics, vaults, switchgear rooms and more. -All employees must always wear Carlton Electric required PPE (gloves, glasses, hard hats, safety boots). -Potential to work overtime and night shifts, sometimes on short notice. -Must be okay with working in areas ranging but not limited to Colorado Springs to Fort Collins. Compensation Package Location: Denver Greater Metro Area/Front Range (Fort Collins to Colorado Springs) Start Date: TBD Status: Full-Time, Non-Exempt Schedule: Normal working hours of Monday-Friday 7AM – 3:30PM. This position may offer or require overtime, weekend, or holiday work. Working hours may change depending on season or project need. Pay Rate: $33-$41 per hour, depending on experience. *This pay rate is the good-faith and reasonable estimate of the range of possible compensation at the time of this job posting. Carlton Electric reserves the right to ultimately pay more or less than the posted rate if they believe the new range is determined in good-faith. Carlton Electric reserves the right to adjust compensation based on, but not limited to, approved factors such as seniority, merit, quantity and/or quality systems, location, education and/or training, and required travel. -Other financial benefits: This position may be eligible for, but not guaranteed a yearly bonus. -Health Insurance: Multiple coverage options available for employee and family. -Dental Insurance: Coverage options available for employee and family. -Vision Insurance: Coverage options available for employee and family. -Employee assistance program. -Short-term and long-term disability insurance available. -Life insurance and voluntary life insurance available. -Paid Holidays -Paid Time Off -401K with company match. Roth and traditional options available. -Company paid continuing education credits. Carlton Electric is an equal opportunity employer. Carlton Electric does not discriminate against any protected category when determining salary and compensation for an employee.

Job Description Associate Buyer | American Lighting Location: Denver, CO (Near Downtown) Work Arrangement: In-Office (40 hours per week) Experience: Associate degree or 3+ years of equivalent experience Position Summary American Lighting is seeking an Associate Buyer to manage the full procurement lifecycle, from data analysis and order placement to international logistics tracking. This role balances routine inventory management with specialized requirements for retail projects, requiring a candidate who is equally comfortable with high-volume data entry and complex inventory planning. Core Responsibilities • Procurement & Data Entry: Manage the high-volume creation and monitoring of purchase orders for inventory, special projects, and operational supplies., • Inventory Analysis: Evaluate weekly forecasts and historical data to develop comprehensive reorder plans for management review., • Logistics Oversight: Coordinate with freight forwarders to track international containers, ensuring schedules are met and stakeholders are updated through final delivery., • Global Buying: Manage supplier communication related to POs and PIs, confirm and track lead times, monitor order milestones, and proactively follow up to ensure timelines are met and risks are escalated as needed, • Excel Proficiency: Substantial experience working with formulas in Microsoft Excel, ideally within an inventory planning or analytical capacity., • Education & Experience: Associate degree required, or a minimum of 3 years of direct professional experience in a purchasing or procurement role., • International Trade: Preference will be given to those with familiarity in international trade and importing processes is preferred., • Analytical Mindset: The ability to identify trends and anomalies within large datasets to ensure inventory accuracy.Company DescriptionMid-size business just outside of downtownMid-size business just outside of downtown

Job DescriptionSimply Put, A Great Place to Work Benesch is a growing, multi-disciplined planning, engineering, and professional services firm. We enhance infrastructure and communities across the country – creating spaces and providing connections in ways that make a difference. We pride ourselves on being nimble enough to remain responsive to client needs yet large enough to offer exceptional bench strength. As a member of our team, you'll have an opportunity to draw from those resources when you need them and, likewise, contribute your expertise when you have something to share. At Benesch, we are looking for candidates with varied backgrounds and worldviews. We are committed to offering an inclusive work environment where everyone feels valued and respected. Statistics show that women and underrepresented groups are less likely to apply for a position if they don't meet 100% of the qualifications. If this statement resonates with you, don't be so hard on yourself—apply for the job! Civil Project Engineer We have a career opportunity for an Civil Engineer to join our growing aviation group in our Colorado division. The ideal candidate will have a minimum of 4 years' experience. The candidate must also have experience designing aviation projects. This individual will be developing plans, specifications, and estimates for airport agencies and private clients. Location This position will be based out of our Denver office. The Impact You Will Have • Design responsibility for elements such as pavement, drainage, utilities, lighting/NAVAIDS, security and fuel facilities, • Responsible for project design calculation files, ensuring adequate independent quality control reviews, • Manage the process of compiling and coordinating plans, specifications, cost estimates and pay items, • Coordinate and review drafting and the assembly of plan sets, • Develop and oversee task work plans for assigned team members, • Engage in active team communication, • Organize technical meetings among design staff, • Perform occasional field construction observation, sometimes requiring out-of-town travel, • Active involvement in professional organizationsWhat We Are Looking For, • Bachelor's degree in Civil Engineering or related discipline required, • Experience with FAA design standards preferred but not required, • P.E. license in the state of Colorado or ability to obtain shortly after onboarded, • Demonstrate advanced use of AutoCAD and Civil 3D Modeling, • Excellent communication skills, verbal and written, • Ability to perform complex analysis and design, • Ability to assemble a complete design package for assigned elements or projects, • Ability to work effectively in a team environment #LI-OS1 The expected compensation range for this position is displayed in accordance with the Colorado Equal Pay for Equal Work Act. The final agreed-upon compensation is based on numerous factors, including but not limited to individual education, qualifications, prior work experience, and geographic location. The total annual compensation package will consist of a base salary, overtime, and bonuses. Benefits: Our benefits package is designed to take care of our employees. Benesch offers a generous paid time benefits plan that increases throughout your career plus several paid holidays. Our benefits include medical, dental, and vision benefits. We also include company-paid life insurance, short term, and long-term disability plans. Benesch offers a 401K plan and profit-sharing contributions to the 401K plan. From insurance and retirement plan to our wellness programs, we provide employee benefits that meet your wants and needs. Colorado Pay Range $95,000—$140,000 USDWhy Work at Benesch At Benesch, we prioritize the health and wellness of our employees, understanding that their well-being is crucial for both personal and professional success. We offer a range of benefits for eligible employees, including insurance, retirement plans, and wellness programs. Our Total Rewards package is designed to support a healthy lifestyle and can be customized to meet the needs of our employees and their families. Click here to learn more about some of the benefits of working at Benesch! Professional Development • Opportunities for management and leadership development at all levels, including executive coaching and leadership development for Team Leaders, Group Managers, Division Managers, and Executive Leaders, • Tuition reimbursement for job-related courses, • Ongoing professional development through resources like Red Vector, LinkedIn Learning, technical team meetings, and knowledge-sharing training sessions, • Personalized training and career development plans with your manager, • Funding for training, committee work, professional organization memberships, and licenses/certifications, • Support for active participation in professional organizations to foster leadership and community engagementRetirement Benefits, • Access to valuable retirement planning tools, education, and individual meetings with plan advisors at no charge, • Potential for Benesch to contribute up to 9% of your gross compensation to your retirement plan (5% profit-sharing contribution to your 401(k) plan, regardless of your own contributions, & 80% match on your contributions, up to a maximum company contribution of 4%)Work/Life Balance, • Flexible work schedules and hours, including work-from-home options (dependent on the role), • Generous Paid Time Benefits (PTB) that increase with your career, • Immediate use of annual PTB; no accrual needed, with the ability to bundle time-off plans for extended vacations or life events, • Ten days of paid parental leave for birth, adoption, or foster placementEmployee Engagement Benesch is firmly committed to Equal Employment Opportunity (EEO) and prohibits employment discrimination for employees and applicants in all protected groups, including veterans and individuals with disabilities, or other status protected by federal, state, and local laws. Know your Rights: Workplace Discrimination is Illegal We will be accepting applications on an ongoing basis until a candidate is found. Benesch is committed to working with and providing reasonable accommodation to applicants with a physical disability or other impairment. If you are limited in your ability or are unable to access Benesch's Careers website due to a physical disability or other impairment, you may request a reasonable accommodation by emailing . This option is only available to those in need of an accommodation due to a disability or other impairment. Please do not use this as an alternative method for general inquiries or status on applications, as you will not receive a response. Reasonable requests will be responded to as soon as possible on a case-by-case basis. External Recruiters and Staffing Agencies Benesch shall have no obligation to compensate any external recruiter or search firm for candidate submissions made without a valid, current, and fully executed agreement. Submission of candidate information does not establish entitlement to a fee. All recruiting activity must be coordinated and authorized through the Benesch Talent Acquisition team. Please direct all communications to

Job Description Overview The Traffic Signal Construction Technician works on various projects building traffic signals, highway and street lighting, infrastructure and Intelligent Transportation System (ITS) within the Denver metro area and other locations within Colorado. The successful candidate will have prior experience building traffic signal projects within the construction industry. This position will be covered by a collective bargaining agreement and is a union position. All candidates must be willing and able to sign on with the applicable union if hired. Company Overview Since 1912, Sturgeon Electric Company, Inc., a subsidiary of MYR Group, Inc, has provided comprehensive electrical construction services to clients throughout the western U.S. Sturgeon Electric has two divisions, offering both power line construction and commercial/industrial electrical construction, making it a full service electrical provider. Sturgeon Electric’s Commercial and Industrial (C&I) electrical construction division specializes in large-scale commercial electrical projects, telecommunications, traffic signalization, gas distribution, high voltage distribution service and maintenance to clients. Sturgeon Electric has experience performing projects under Integrated Lean Project Delivery methods, and also offers pre-construction services, in-house pre-fabrication capabilities, and Building Information Modeling (BIM) capabilities Essential Functions • Mounting devices, • Installing poles, • Drilling caissons, • Installation of required equipment, • Wiring of equipment, • Trouble shooting and integration of required equipment, • Any other job related duties as requested, • Understand and comply with the Company’s Code of Business Conduct and Ethics and other industry-specific professional and ethical conduct standards, if applicable Responsibilities Qualifications • Journeyman level position requires 3 years previous industry experience, • CDL Class A driver’s license, • IMSA Level 2 certification Qualifications Compensation & Benefits • $37.65 - $45.19 per hour. This will be a union position. Wage depends on experience and certifications, and benefits are detailed within the applicable collective bargaining agreement, • Healthcare for employees and immediate families will be paid by Sturgeon Electric, • An additional 15% of the wage scale is paid directly into your retirement account Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at 1-855-635-1321. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.

Job DescriptionColorado based Traveling electricianBased out of Colorado, traveling throughout the area and surrounding states Typical workweek is Sunday through Thursday Salary $30-$45 per hour DOE Per Diem paid for all travel days Company Vehicle Benefits *Contract to perm, during contract/probationary period supplemental benefits are available, after probation, benefits are fully paid for employees and family, medical, dental, vision, PTO, Paid holidays, 401K w company matching, life insurance, legal services, prescription assistance and more! Must have an active Journeyman license or Master electrician license and present number during application process for verification. Inspect and test electrical components to diagnose problems, repair broken electrical components, and install updates for outdated electrical systems.Troubleshoot electrical problems and install new wiring or other components to fix lighting, fuse boxes, and generators.Oversee training for co-workers as needed.Manage multiple tasks simultaneously and meet project deadlines and daily deliverables (i.e. pictures, signed checklists, As-Built, etc.).Resolve conflict while maintaining positive relationships at all levels.Conduct tests to ensure all newly installed electrical systems and component devices are operational.Ensure electrical systems meet local, county, state, or federal codes; legal and/or insurance requirements.Adhere to all required project safety requirements as set forth by Wachter, our customers, or OSHA.Perform any other duties not specifically stated herein, but which your supervisor may assign.Maintain the company’s high standard of quality and professionalism with regards to workmanship, customer relations, coworkers, behavior and appearance. Requirements: • Licensed Journeyman or Master Electrician at the state level is required., • Experience as a Lead or Forman electrician., • Experience as a Commercial and/or Industrial Electrician., • Based on our clients needs you could be home or traveling on the road for 1-3 weeks at a time throughout the region., • Flexible and willing to work on-call, day, night, weekend, or overtime shifts as the job requires., • Ability to read blueprints and comprehend SOW documents., • Dependable – must show up to work on time daily., • Knowledge of industry standards and current NEC requirements., • Safety conscious, follow all applicable PPE guidelines., • Has basic hand tools and PPE., • Strong interpersonal skills with ability to coach, motivate and mentor field staff, • Self-motivated, career-minded, looking for a place with advancement opportunities., • Ability to thrive in a high pressure environment., • Proficient with the use of computers, including email, spreadsheets, and database Microsoft Office, Outlook, Word, Excel, ect., • Advance troubleshooting skills., • Demonstrate effective capability in problem solving and analytical thinking., • Excellent customer relationship and communication skills; verbal and written. #STEI

Job DescriptionMantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility—inside and out—and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. This role owns the intake, coordination, and resolution of client service requests across a national portfolio. It ensures incoming issues are triaged quickly, appropriate resources are identified and dispatched, and work is completed with clear communication and minimal disruption to the client. The role serves as a central coordination point for service activity across multiple service types, supporting clients, project teams, and contractors to deliver fast, accurate, and reliable outcomes. OUTCOMES (SCORECARD FOR SUCCESS) • Service requests triaged and dispatched within defined SLA, • 95%+ of service requests resolved without escalation or client complaint, • All work orders and service records entered accurately within 24 hours, • Contractor invoices processed within 3 business days of receipt, • Client updates provided within agreed timelines for 100% of active requests, • <2% error rate in data entry, reporting, and documentation, • Maintains strong working relationships across clients, contractors, and internal teamsRESPONSIBILITIES, • Receive and triage incoming client service requests across multiple service types, • Dispatch appropriate contractors based on location, scope, urgency, and resource availability, • Service as a primary point of contact for clients, ensuring timely, clear, and professional communication, • Collaborate with project managers, account managers, contractors, and internal teams to coordinate service execution, • Track all active service requests and ensure timely resolution, • Maintain accurate and complete records in Salesforce and internal systems, • Process contractor invoices and confirm alignment with scope and work performed, • Generate and distribute client-facing updates and service reports, • Identify risks or delays, escalate issues as needed, and support resolution, • Maintain visibility into service activity, workload, and coordination needs across a national portfolioMINIMUM QUALIFICATIONS, • 3+ years of customer service or coordination experience, • Strong written and verbal communication skills, • Ability to manage multiple high-urgency tasks simultaneously, • High attention to detail in documentation and data entry, • Proven ability to collaborate across internal teams and external partnersPREFERRED QUALIFICATIONS, • Experience in roofing, construction, or facilities services, • Experience using CRM or project tracking systems (e.g., Salesforce), • Associate's or Bachelor's degree in Construction, Communications, or related fieldWORKING CONDITIONS/PHYSICAL REQUIREMENTS, • Work environment: Office-based, fast-paced, high-volume coordination role, • Physical requirements: Sitting, standing, walking; occasional lifting up to 30 lbs.

Job Description At Maven, we humanize brands to move people. As one of the largest independent brand experience companies in the country, we solve problems by putting people at the center and creating memorable moments that drive human and business impact. Our business model starts and ends with employee happiness. Fueled by diverse passions, unique personalities, and the hunger for the most complex challenges, Maven people unleash a culture that creates the best possible brand experiences for the world and the most fulfilling team experiences for each other. It is this special culture that unites our talented team around a shared purpose: making the world more human. It is an exciting time at Maven as we continue to create the happiest, most inspiring, and truly impactful company in the industry. We hope you will choose to be a part of it. Program Director We are seeking a Program Director to play a pivotal role in shaping the future of signage at Maven—the industry’s go-to partner for large-scale, complex signage programs. Our work transforms healthcare networks, financial institutions, corporate campuses, and retail environments into spaces where brands come to life and people find their way with ease. As Program Director, you will guide clients and teams through every stage of ambitious, multi-site signage programs. You’ll oversee strategy, execution, vendor partnerships, and financial stewardship to ensure programs are delivered with excellence. This is a leadership role where your expertise will influence outcomes from surveys and design through fabrication, installation, and close-out. If you are a seasoned program leader who thrives on managing complexity, building trusted client partnerships, and mentoring teams to do their best work, this is an opportunity to make a visible impact on some of the most significant signage programs in the country. Responsibilities • Lead complex, multi-site signage programs from setup through close-out, including surveys, design, technical documentation, vendor coordination, fabrication oversight, installation, and program reporting., • Serve as the primary client contact, cultivating strong relationships, providing clear updates, resolving issues, and identifying opportunities for program growth., • Organize vendor bids, analyze proposals, and make recommendations to clients on vendor selection based on program needs and performance., • Partner with Technical Design Directors to ensure design intent and technical documentation are translated accurately into vendor deliverables., • Review prototypes, shop drawings, and first article signs to ensure compliance with brand standards, technical requirements, and program goals., • Oversee vendor performance and quality control, ensuring consistency across fabrication methods, finishes, lighting, and installation techniques., • Manage program budgets, schedules, and staffing to deliver on time and within scope., • Leverage SignChart® as the platform for all program tracking, reporting, financial transparency, and client communication., • Manage a team of 3–4 direct reports, providing day-to-day guidance, performance feedback, and support for professional growth., • Continuously improve processes, tools, and workflows to enhance program delivery and team efficiency., • Actively coach, mentor, and develop team members—cultivating their skills, building accountability and confidence, preparing future leaders, and recognizing achievements., • Promote strong internal collaboration and communication, contributing to a positive and high-performing team culture., • Contribute to new business efforts, including proposals and presentations, while fostering organic growth with existing clients., • 12+ years of experience in program management, ideally within signage, architectural, construction management, or environmental design firms., • Degree or professional background in architecture, industrial design, construction management, or related disciplines strongly preferred., • Proficiency in project management, design and documentation tools, including Powerpoint, Excel, AutoCAD, Revit, and SketchUp, • Deep knowledge of signage programs, including survey methodologies, fabrication techniques, materials, finishes, lighting, installation practices, and cost drivers., • Strong written and verbal communication skills, with the ability to clearly convey program strategy and technical requirements to internal teams, vendors, and clients., • Highly organized, self-motivated, and capable of managing multiple programs independently Salary: $95,000 - $150,000 Final salary will be determined based on seniority, merit, geographic location, education, training and experience, and may vary from the amount listed above. Our people take care of us, so we take care of our people. Enjoy: • Ample paid time off to recharge and reset, • 401K: traditional and Roth options, plus employer match, • 100% employer-paid medical, dental and life insurance premiums for employees, • Optional vision, life, short-term and long-term disability coverage Application Deadline: 5/31/2026

Job DescriptionAbout C.R. England, Inc.Founded in 1920, C.R. England, Inc. is headquartered in Salt Lake City, UT and is one of North America’s premier transportation companies. C.R. England is an industry leader in Dedicated, Over-The-Road, cross-border Mexico, and Intermodal services.C.R. England has also been regularly recognized for management excellence. This year, C.R. England was recognized by Newsweek as one of ‘America’s Greatest Workplaces for Women’, one of only three truckload carriers to receive this recognition, and ‘America’s Greatest Workplaces for Diversity’ one of only seven truckload carriers to be so recognized. Additionally, C.R. England was honored with a ‘2020 Glassdoor Top Places to Work’ award, the ‘Achievers 50 Most Engaged Workplaces™ Award’ and by Deloitte Private and The Wall Street Journal as a ‘2021 US Best Managed Company’.Committed to giving back the community, learn more about C.R. England Inc.’s goal of providing one million meals to children annually through partnerships with local food banks by visiting . Position: Diesel Technician Location: Denver CO Pay: $28-33.00/hr Schedule: M - F ATTENTION EXPERIENCED DIESEL MECHANICS: If you want to build a stable career with an industry leader that provides: • A safe, clean, and organized shop,, • Free uniform and laundry service, including jackets,, • Reimbursement for boots and safety glasses (including prescriptions safety glasses),, • Annual safety bonuses, and, • Generous employee referral bonuses... C.R. England has an amazing career opportunity for you! We are growing and offering qualified and experienced new hires a $5,000 signing bonus paid during the first year of employment. (Some restrictions may apply. Signing bonus may not be available to all candidates. Manager or recruiter can provide additional details.) Why work for C.R. England?, • Great Compensation & Benefits!, • Weekly pay, vacation, a floating holiday, medical, dental, life, vision, 401K, and more, • Free uniform and laundry service, including jackets, • Reimbursement for boots and safety glasses (including prescriptions safety glasses), • Annual safety bonuses, • Generous employee referral bonuses., • Great Facilities!, • Tractor lifts., • T-8 lighting throughout all bays and isles., • Locker rooms w/ showers., • Break rooms., • Bulk fluid delivery systems available to all repair bays., • Clean DPF’s with FSX Machines (we clean our own)., • Open parts rooms., • Great Equipment! Our tractor fleet of 4,000+ Daimlers consisting of: • Cascadia tractors with DD15’s and DT-12 automated transmissions., • Western Stars with DD15’s and DT-12 automated transmissions., • Our fleet of 8,800 trailers consisting of:, • Utility and Wabash trailers., • Thermo King and Carrier refrigerated units., • TempStack intermodal containers., • Dry Van Trailers with Dura-Plate., • Our generous tool supply, laptops, and diagnostic software., • Great Career Path! - Personal and professional development through C.R. England University., • Safety training., • Self-paced on-line training., • Leader led training., • Hands-on training., • Career Path Planning and Individual Development Plans. Job qualifications may include, but not limited to: • General knowledge of EGR/emissions control systems, foundation, air, and ABS brake systems, and DC electrical systems., • Understand the importance of diagnosis and repair versus parts replacement. - Basic computer knowledge with good written communication skills., • Ability to read and understand repair manuals and complete/fill tags and repair orders., • Experience with Freightliners or Detroit engines a plus. - Excellent customer service skills., • Be 18 years of age or older., • High School Diploma or GED., • Graduation from trade or technical school., • Substantial diesel technician experience or heavy duty military mechanic experience with tanks, LAVs, or 5-ton vehicles can take the place of trade school., • Must provide your own roll-a-round storage and hand-tools. Job requirements may include, but not limited to: • Troubleshoot, diagnose, and perform preventative maintenance and repairs on tractor systems including diesel engines, transmissions, brakes, HVAC, satellite/cellular systems, electrical, suspension, and tires., • Utilize computer systems (TMT, TMW, and internet) to accurately create, track, and complete work order repairs including the tracking of time (labor hours), parts used, work completed, and locate technical information as required., • Move equipment on and off the safety lane and around the yard., • Perform proper safety protocols and procedures, including use of protective equipment, and maintain a safe work area in accordance with company policy., • Provide superior customer service to drivers., • Maintain a positive work atmosphere by acting and communicating in a positive, collaborative, efficient, service-oriented manner., • Perform additional duties as assigned by leadership., • Other duties as assigned. C.R. England 2025 C.R. England is an equal opportunity at will employer and does not discriminate against any employee or applicant for employment because of age, race, religion, color, disability, sex, sexual orientation or national origin.

Job DescriptionCalling Established Stagers & Interior Designers in the Denver Area Grow Your Staging Business Without the Cost of Inventory, Storage, or Logistics All About Staging & Design is opening our 15,000+ sq ft staging warehouse in Denver to a small group of independent stagers and designers who want to grow their business faster. If you already work with realtors, builders, investors, or homeowners and want to take on more projects without the huge expense of owning furniture, storage space, and delivery vehicles, this opportunity may be the perfect fit. Instead of building your own warehouse and inventory from scratch, you can plug into ours. What We Provide • 15,000+ sq ft staging warehouse in Denver, • $1M+ inventory of furniture, art, rugs, lighting, and décor, • Professional delivery and installation crew, • Organized inventory systems, • Logistics coordination, • Opportunity to collaborate with an established local staging brand This allows you to focus on designing beautiful spaces and growing your client base, while we support the operational side. Who This Opportunity Is For We are looking to collaborate with motivated stagers and interior designers who already have experience or an existing client base. This is ideal for someone who: • Has worked with realtors, builders, or investors, • Has staging or interior design experience, • Wants to scale their business without owning inventory, • Enjoys building relationships and managing their own clients, • Values independence but appreciates shared resources This is not an entry-level training program. We are looking for professionals who want to grow their own business with strong operational support. How the Model Works You keep 100% of your staging/design fees You manage: • Client relationships, • Consultations, • Design planning We provide: • Furniture inventory, • Warehouse access, • Delivery and installation logistics Inventory rental and delivery fees apply depending on project scope. Partnership Structure This opportunity operates as an independent contractor partnership (1099). Partner stagers operate their own staging or design business while utilizing our warehouse inventory and logistics support. Partner stagers are responsible for: • Their own client relationships, • Maintaining appropriate business insurance (general liability), • Marketing and growing their brand, • Transporting themselves to job sites and the warehouse Partner stagers may continue to promote their own brand and portfolio, and are welcome to use our furniture installations in their marketing and project photography. About Us All About Staging & Design is a female-owned, family-operated staging company based in Denver, led by owner and head stager Jeannie Pucci. With over 15,000 square feet of curated staging inventory, our goal is to support talented stagers and designers by providing the infrastructure needed to grow a successful staging business. Interested? Send us: • A short introduction about your experience, • Examples of past staging or design work (if available), • A little about your current client base or goals We look forward to connecting with creative, motivated professionals ready to grow.

Job Description this position requires an individual who is self-motivated and able to work independently. Duties will include managing and designing projects from concept through construction, coordination with the client, utilizing and coordinating internal resources . You will also be responsible for leading and helping to further grow our local office and Electrical Engineering Department, as well as participate in business development activities for the company. • BS in Electrical Engineering, • PE Preferred but not required, • 3+ years minimum experience, • Proficiency in Autodesk Revit preferred, • Experience with design and coordination of complex electrical systems, • Knowledge of lighting, technology and fire alarm systems, • Successful experience in project management and client interaction, • Demonstrated leadership with staff and projects, • LEED Accreditation a plus

Job DescriptionDescription: Are you Passionate about Power? As an Electrical Engineer with Swanson Rink, you will have the opportunity to work on a variety of projects with high-profile clients who are passionate about their facilities and work in a collaborative process to find the right solutions for their unique needs. Our engineers are supported by specific Project Management and BIM staff allowing our engineers for focus specifically on developing engineering solutions for our clients. We are looking for engineers who have attained initial experience in electrical engineering design and are seeking an opportunity to engage in this exciting and challenging market. Get to Know Us:INTEGRITY | ENGINEERING EXCELLENCE | LEGACY Founded in 1949, Swanson Rink specializes in designing mechanical, electrical, fire protection, plumbing and technology infrastructure for data centers, airports, and other complex buildings. Ranked among Building Design + Construction top Engineering Firms for both Airport and Data Center design four years running! Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Follow us on LinkedIn! What Can We Offer You for All Your Hard Work? • The opportunity to work on complex, exciting projects for high profile clients, • Focused training and professional development, mentorship, professional career growth opportunities, • Paid professional membership fees, tuition reimbursement, prep and exam coverage for certifications and licenses, • EcoPass/Commuter benefits (Denver), • Stock purchase plan, • Company paid holidays, Paid Time Off, paid parental leave, • Vision, dental and medical insurance with employer HSA contributions, FSA options, • Monthly technology allowance, • Traditional and Roth 401(k) with immediate vesting on matching contributions Your Job Responsibilities: • Design electrical systems for data centers, aviation and commercial/industrial facilities including:, • Design power systems, including layout and circuiting of receptacles, miscellaneous equipment, mechanical equipment, and completion of panel schedules., • Power design associated with UPS and generator support systems, mechanical systems and other equipment., • Design of electrical one-line diagrams., • Conduit routing, layout and circuiting of receptacles, and completion of panel schedules., • Short circuit and voltage drop calculations., • Fuse and circuit breaker coordination studies., • Prepare studies on various electrical systems, identify options and potential solutions. Provide related cost comparisons., • Development of specifications for the lighting and power systems., • Review of contractor’s shop drawings and submittals., • Construction observations., • Demonstrates expert application of local and national building codes and all applicable safety codes and industry standards and International Building Codes, • May engage in business travel for client meetings, field surveys, etc., • Participate in seminars and training events to stay current with industry trends. Requirements: Your Requirements and Qualifications: • A Bachelor's Degree in Electrical Engineering from an ABET accredited four-year college or university., • Registration as a Professional Engineer or be willing to become licensed., • Certification as an EI/EIT required., • Minimum of 2 years’ experience as a consulting engineer., • Requires the ability to pass background checks, security screenings or drug testing as required by our clients and/or Federal contracts. Equal Employment Opportunity/Veteran/Disability Note to Staffing Firms: To protect the interests of all parties, Swanson Rink does not accept unsolicited resumes from any source other than directly from an applicant or from an approved vendor with a fully executed written agreement. Swanson Rink is not responsible for any placement fees associated with unsolicited resumes.

Job Description$57,784 -$60,000 RESTAURANT MANAGER Compensation: · $57,784 -$60,000, with Bonus Opportunity. Not eligible for tips. Outback Steakhouse, the home of juicy steaks, spirited drinks, and Aussie hospitality. Monitor 200 Award-Ranked in Top 50 Franchisees in the U.S., 4 years in a row. If you are looking for a great place to work, have fun, and make money mate, click here to apply. With limited supervision, the Restaurant Manager is responsible for the daily operations of the FOH/BOH functions in a restaurant. These include company standards, customer experience, professional leadership, and direction for employees. All new managers will go through an extensive Manager in Training (MIT) program. Combining this with your previous experience, we will set you up for success to become a top-notch leader within the Outback family! BENEFITS: • Comprehensive health insurance. Individual as well as Family plans (Medical, Dental, Vision)., • Quarterly bonus based on company goals and metrics., • 2 Weeks paid vacation accrual., • 401k Retirement plan., • Group Life and AD&D Insurance, Short Term and Long-Term Disability., • Accrued Paid Sick Leave: up to 48 hours of paid sick leave per year, required under the Healthy, Families and Workplaces Act (HFWA). This benefit is for use of a variety of health- and safety-purposes, which employees “earn” at a rate of 1 hour of leave for every 30 hours worked., • Public Health Emergency (PHE) Leave: up to 80 hours of PHE-related leave when a PHE is declared., • PerkSpot Discounts., • Growth Opportunities to Upper Management. Development programs designed for future promotions., • Incredible Work Life Balance. Targeting a 47-hour work week., • 11 Week paid on-site Training Program., • Complimentary Manager Shift Meal., • Hospitable culture that recognizes hard work, effort, perseverance and leadership., • Company sponsored Employee Assistance Program., • We are the largest franchisee of Outback Steakhouse., • Contributes to the success of the restaurant’s operations: FOH & BOH., • Leads a team to success and provides mentorship; creates an enjoyable environment., • Optimizes profits with labor, along with food & beverage costs, through proper ordering and inventory practices. Handles policies & procedures; maintains compliance., • Increases customer satisfaction while managing standards of service., • Continuously grows the business through sales and marketing., • Always recruits new talent for future staff openings., • Committed to safe food handling, cleanliness, safety, and sanitation standards at all times., • Ensures the quality of food with proper safety equipment, tools, and recipe specs., • Passionate about the taste and temperature of each dish and perfect plate presentations., • Proven management experience (2+ years) in a restaurant supporting large teams; full-service experience preferred., • Demonstrated success in a leadership role., • Flexible to work at other locations in the region when needed., • You must be a minimum of 21 years of age., • Highly proficient in English verbal, reading & writing communication skills., • Ability to lift, carry or move up to 30 lbs., • Able to work in hot and cold environments., • Ability to walk and stand for extended periods of time, up to 10 hours per shift., • Frequent bending, reaching, kneeling, squatting and stooping., • Manual dexterity to handle glassware, utensils and technology systems., • Ability to move quickly in a fast-paced environment., • Visual ability to include distance, close, color, depth and peripheral. Also, the ability to adjust focus as needed. The role involves working in areas with low or dim lighting. All newly hired employees are subject to and must successfully complete the Electronic Employment Eligibility Verification Program (E-Verify). You can view the E-Verify Participation and Right to Work poster at ABOUT US: We are Out West Restaurant Group, the largest franchisee of Outback Steakhouse in the United States. Outback Steakhouse is an Australian theme restaurant that opened in March of 1988. At Outback Steakhouse we take food seriously, without forgetting the fun and we are proud to do things uniquely and strive to positively impact the lives of our people we call “Outbackers”. We believe if you treat people “Just Right” then success is sure to follow. It’s a culture of respect and camaraderie that breeds enthusiasm. We start with indulging each customer like a guest in our own home. We continue by committing to the success of each and every Outbacker to be trained to the best of their ability. Out West Restaurant Group is an equal opportunity employer. We do not discriminate based on race, color, religion, sex, national origin, age disability, or any other protected status. All employment decisions at Outback are based on business needs, job requirements and individual qualifications without regard to any characteristic protected by both federal and state laws. We are committed to fairness, respect and opportunity for all employees. International Franchise Association’s Franchisee of the Year Award 2022, for Exemplifying Excellence in Local Community Service. Ranked #1 in Customer Satisfaction within a Full-Service Restaurant in 2023! Proud contributor to non-profit organizations, California Care and CORE. Both organizations do incredible work, providing essential support to restaurant employees and their families during challenging times. There is no fixed deadline for applying for this position.

Job Description Senior Electrical Engineer | Mission Critical HED is looking to add an experienced team member to our group of talented Electrical Engineers. The candidate should have broad electrical engineer expertise, with a focus on mission critical projects. Primary responsibilities will include providing for the design and technical systems for large, complex projects from schematics through construction administration. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Typical Duties • Responsible for building system concepts and documentation process from schematics through construction administration phases within the discipline., • It is expected that the engineer will be in regular coordination with Supervisor in project development and performance., • Electrical Engineer shall have a proficient knowledge of primary sectors of design including:, • Power Distribution, • Lighting and Controls, • Fire Alarm, • Specification writing and editing., • Energy conservation and sustainability/report technical writing., • Function as Project Discipline Team Leader on large, complex projects when assigned., • Responsible for directing and overseeing project team members within their own discipline. Level 4 is responsible for monitoring and executing team compliance with project budget., • Prepare and monitor project status reports., • Coordinate with Electrical Engineering Discipline Leader in preparing project Man-hour Estimates., • Prepare and document required code research for project., • Participate in the development of the project cost model and design to it., • Develop and maintain Electrical Basis of Design Journal throughout the life of the project., • Conduct material and product research as required for project development., • Attend project meetings as necessary., • Interface with other Project Discipline Team Leaders., • Respond to client questions/requests within 24 hours., • Document interpretation and submittal reviews during bidding and construction administration., • Monitor and mentor staff to produce quality architectural and engineering services within a project team concept., • Mentor support engineers to help prepare them for greater project responsibilities., • Provide regular feedback to the Electrical Engineering Discipline Leader on performance of support engineers., • Identify opportunities to improve quality, services, and participate in the implementation., • Participate in in-house training activities., • Participate in related professional organizations and activities., • Contribute to department discussions on field feedback, lessons learned, new technology or developments encountered., • Bachelor's degree and licensure required., • LEED Accredited preferred., • Revit experience, • Minimum six years' experience in A/E industry preferred., • Extensive knowledge of all aspects of professional services from schematic design through project close-out, including design and technical expertise., • A comprehensive understanding of the coordination aspects and related requirements of all design disciplines., • Proficiency in short-circuit and selective coordination calculation. Utilization of EDSA, SKM or other analytical modeling software preferred., • Excellent written/ verbal communication and strong organizational skills., • Possess the ability to motivate, mentor staff, and delegate work assignments., • Computer and CADD/BIM literate., • Very detail-oriented, self-motivated, enthusiastic and flexible., • Capable of traveling to and from project sites for attending client, project and construction meetings., • Ability to access existing and new project sites for observation, investigation and evaluation purposes., • Ability to use equipment for communication and documentation purposes., • Visual acuity to perform responsibilities. #LI-DD1

Job DescriptionBenefits: • Employee discounts, • Flexible schedule, • Free food & snacks, • Free uniforms, • Training & development Come join The Woodhouse Day Spas, voted Americas best day spa in 2012 and 2013 by American Spa Magazine! We are hiring for Part Time Spa Concierge. At The Woodhouse, we value our team members and strive for excellence with every guest experience. Share with us your unique talents and professionalism and in return, we will train you in The Woodhouse Way providing you with the tools, knowledge, and intention that will help you deliver the best guest experience each and every time. We are a company that recognizes, rewards and celebrates with you along the wayas you excel and grow in your talents, opportunity will follow you. The Woodhouse Day Spa is the leader in affordable luxury. The willingness to serve and the ability to deliver are the core of our companys mantra. We are seeking passion filled, enthusiastic individuals driven by intention and guided by excellence to join our team today. Want to be more than just a number --then you should consider joining the Woodhouse Family today! Our spa concierge... Makes the magic happen by providing the ultimate guest experience and invoking guest delight! Happiness follows you wherever you go! More specifically, our fabulous Spa Concierge: • Provides personal attention from the time the guest walks though the door, • Educates the guest on the Woodhouse experience including a warm welcome, introduction to our locker room and amenities, and helping them to have a seamless experience, • Answers the phone with a smile each and every time, • Is the brand ambassador, making sure the guest enters a clean, safe place with just the right lighting, music and scent to ensure that memorable experience, • Remembers the small things that make The Woodhouse special--the guests favorite drink, the warm inviting neck wrap, personal details such as birthdays and anniversaries, • Serves as back up for the leadership team, when they are busy taking care the big stuff, you always make sure things are running smoothlyRequirements, • Highly knowledgeable about the surrounding area & lives within 20 minutes or less from location., • Excellent customer service skills with a friendly and warm demeanor., • Strong verbal and written communication skills and ability to multitask., • Ability and willingness to work flexible hours including weekends, holidays, and late nights., • Ability to work on feet for 6-8 hours., • Must be able to lift/push/reach for/carry 25+ pounds occasionally., • High school diploma or equivalent experience., • Experience with luxury service preferred Woodhouse Perks include: • Competitive Pay and Incentive programs, • Generous discounts and opportunities to enjoy services and products, • The Woodhouse Way paid training program

Job Description About The Source Hotel Nestled in Denver’s vibrant RiNo Art District, The Source Hotel is a modern retreat that seamlessly blends industrial character with contemporary elegance. As part of a dynamic marketplace featuring artisanal dining, craft beverages, and curated retail, our hotel offers guests an immersive experience that celebrates creativity, culture, and community. With thoughtfully designed spaces and an atmosphere of inspired hospitality, The Source Hotel is more than a place to stay, it’s a destination to discover. We are looking for our next great team member to join us on our team. We are committed to providing you with: • Highly competitive wages, • An exceptional benefit plan for eligible associates & your family members, • RSP/401K matching program for eligible associates What You’ll Do • Responsible for all areas of the Public Area Attendant Checklist on a daily basis., • Stock caddies/carts with all required cleaning supplies, linen, amenities, and equipment., • Maintain awareness of guests, greeting guests in passing, using names when known, moving carts to allow guests to pass, and turning off vacuum cleaners when guests are present., • Empty and recycle trash., • Clean stairwells, windows, furniture, lighting, fixtures, drapes, vents, and plants., • Sweep and mop floors; vacuum and shampoo carpets., • Clean and stock public restrooms., • Clean fitness center, employee locker rooms, offices, guest and service elevators, drinking fountains, vacuum cleaners daily., • Unload and store all unused items from caddies/carts, and store caddies/carts correctly., • Maintain positive and professional communication with all staff., • Provide recognition to others, including co-workers, supervisors, managers, and directors., • Ensure a healthy and safe work environment for staff and guests., • Be knowledgeable of property facilities, services, hours of operation, in-house events, conferences, and amenities to proactively assist guests., • Promote property outlets to guests., • Assist guests in finding locations within the property by escorting, when possible, or giving clear directions., • Resolve guest complaints using property procedures., • Create a positive environment in which all employees have the ability to maximize their potential., • Listen to comments, criticisms, and feedback from guests, employees, and managers., • Participate in daily pre-shift meetings., • Always smile and offer a warm greeting to all., • Take the initiative to offer assistance throughout the property., • Perform duties in accordance with company standards, policies, and guidelines, and applicable laws and regulations., • Perform additional duties as requested by department managers and supervisors., • Communicate with supervisors and managers to ensure that assigned duties are completed to standard., • Coordinate operations with other departments, as needed., • Present a professional image to employees, guests, clients, owners, and investors., • Ability to work evenings, weekends, and holidays, as needed., • Ability to comprehend and use basic language, either written or spoken, to communicate information and ideas., • Ability to read, comprehend, and write simple instructions., • Ability to perform numerical operations using basic counting, adding, subtracting, multiplying or dividing., • Ability to effectively deal with internal and external customers and staff, some of whom will require high levels of patience, tact, and diplomacy., • Ability to move throughout the business (standing, walking, kneeling, bending) for extended periods of time., • Ability to make repeating movements of the arms, hands, and wrists., • Ability to express or exchange ideas verbally and perceive sound by ear., • Ability to obtain impressions through the eyes., • Manual dexterity, hand-eye coordination, and ability to work with hand above shoulders., • Ability to regularly move objects (lift, push, pull, balance, carry) up to 50 pounds / 25 kilograms., • Ability to turn or twist body parts in a circular motion.

Job Description$15.16-$15.16 SERVER Compensation: -$15.16-$15.16. Tip eligibility. -Per the Colorado Constitution, this employer claims tip credit per Colorado standards. Join for the Fun, Stay for the Career! If you are looking for a great place to work, have fun, and make money mate, click to apply. Come join the Outback family as an Outbacker where you will make memorable first and last impressions with all our customers. You will support our commitment to bringing the best of who we are to deliver perfectly tailored service to each and every guest. As an Outbacker, you’ll help to provide each customer with an AUS-SOME dining experience in the restaurant, that makes each guest’s day better. BENEFITS: • Comprehensive health insurance (medical, dental, vision) for employees eligible under ACA measurement rules., • Accrued Paid Sick Leave: up to 48 hours of paid sick leave per year, required under the Healthy, Families and Workplaces Act (HFWA). This benefit is for use of a variety of health- and safety-purposes, which employees “earn” at a rate of 1 hour of leave for every 30 hours worked., • Growth Opportunities! Shift Leader program with extensive on the job training., • Hospitable culture that recognizes hard work, effort, perseverance and leadership., • Closed Thanksgiving & Christmas Day to spend the day with family & friends., • Flexible Schedule., • Meal discounts., • Company sponsored Employee Assistance Program., • We are the largest franchisee of Outback Steakhouse., • Responsible for exceeding the customer expectations by providing them with friendly, prompt, and attentive service, that is guided by each guest’s preference and cues., • Extensive knowledge of our food and drink menu. Recommend, upsell, and reinforcing the customers’ orders., • Prepare food and condiments adhering to Outback standards., • Accuracy with guest orders to ensure satisfaction., • Buss tables, deliver food and beverages, and ensure every opportunity to WOW a customer is complete. Teamwork is essential and required by all Outbackers., • Commitment to food safety, cleanliness, job safety and sanitation standards., • Handle cash and credit transactions accurately., • Commitment to food safety, cleanliness, job safety and sanitation standards., • Must be at least 18 years old to sell alcohol., • Ability to lift, carry or move up to 30 lbs., • Able to work in hot and cold environments., • Ability to walk and stand for extended periods of time, up to 8 hours per shift., • Frequent bending, reaching, kneeling, squatting and stooping., • Manual dexterity to handle glassware, utensils and technology systems., • Ability to move quickly in a fast-paced environment., • Visual ability to include distance, close, color, depth and peripheral. Also, the ability to adjust focus as needed. The role involves working in areas with low or dim lighting. All newly hired employees are subject to and must successfully complete the Electronic Employment Eligibility Verification Program (E-Verify). You can view the E-Verify Participation and Right to Work poster at ABOUT US: We are Out West Restaurant Group, the largest franchisee of Outback Steakhouse in the United States. Outback Steakhouse is an Australian theme restaurant that opened in March of 1988. At Outback Steakhouse we take food seriously, without forgetting the fun and we are proud to do things uniquely and strive to positively impact the lives of our people we call “Outbackers”. We believe if you treat people “Just Right” then success is sure to follow. It’s a culture of respect and camaraderie that breeds enthusiasm. We start with indulging each customer like a guest in our own home. We continue by committing to the success of each and every Outbacker to be trained to the best of their ability. Out West Restaurant Group is an equal opportunity employer. We do not discriminate based on race, color, religion, sex, national origin, age disability, or any other protected status. All employment decisions at Outback are based on business needs, job requirements and individual qualifications without regard to any characteristic protected by both federal and state laws. We are committed to fairness, respect and opportunity for all employees. Monitor 200 Award-Ranked in Top 50 Franchisees in the U.S., 4 years in a row. International Franchise Association’s Franchisee of the Year Award 2022, for Exemplifying Excellence in Local Community Service. Proud contributor to non-profit organizations, California Care and CORE. Both organizations do incredible work, providing essential support to restaurant employees and their families during challenging times. There is no fixed deadline for applying for this position.

Job Description BUILDING ENGINEER II Working Shift Sunday through Thursday or Tuesday through Sat 3:00 pm to 11:00 pm. JOB SUMMARY: The Building Engineer II apply trade skills to perform preventive maintenance and corrective repair of building systems for the safe, efficient and proper operation of the assigned property. The individual in this role must be capable of completing all tasks as directed by the Chief Engineer, Assistant Chief Engineer or property management staff with some supervision, taking ownership when assigned team projects and accepting responsibility for actions and results. DUTIES AND RESPONSIBILITIES: • Complies with all applicable codes, regulations and governmental agency and Company directives related to building operations and work safety., • Works in a constant state of alertness and safe manner., • Competent in all shift operations, satisfying work orders and/or providing some technical and procedural assistance for coworkers., • Electrical: Possesses a working knowledge of electrical systems, circuits and electrical safety procedures. Knowledgeable in troubleshooting, short circuits, grounding issues, etc. of single- or three-phase AC circuits. Competent in the replacement of outlets, switches, lighting ballasts, circuit breakers, motor control starters, motors, etc. Assists with the preventive maintenance program for all electrical equipment., • HVAC: Possesses a working knowledge of heating, ventilating and air conditioning (HVAC) systems and Central Plant operations to include troubleshooting of same. Assists with preventive maintenance for all building mechanical equipment such as air handlers, pumps, variable air volume units, etc. Knowledgeable in building automation systems (BAS). Responds to HVAC calls. Knowledgeable in chemical treatment. Performs inspections on chillers; adjusts and records findings. Replaces belts, motors, bearings, actuators and valves on all mechanical equipment. Knowledgeable in pneumatic or direct digital control (DDC) controllers and actuators for proper operation., • Life Safety: Proficient in the property’s life safety systems and all life safety recordkeeping. Identifies and responds to fire alarms and trouble calls; properly enables or disables points. Conducts inspections of emergency generator and fire pumps; records results. Makes recommendations for outside service as appropriate., • Miscellaneous: Maintains a basic understanding of mechanical drawings and wiring diagrams., • Repairs or replaces door closures, hardware and operators. Adjusts or repairs security systems., • Maintains adequate supplies and tools and orders materials necessary to complete all tasks., • Arranges for subcontractors when required., • Updates job knowledge at an appropriate level by participating in educational opportunities, reading professional publications, growing personal networks and possibly participating in professional organizations., • Performs and/or oversees the day-to-day efficient operation, maintenance and repair of all building and site systems for assigned properties. Building systems include but are not limited to HVAC, electrical, lighting, plumbing, energy management, water treatment, hardware, keying and fire protection., • Assist in the monitoring of contractors, inspecting work and generating deficiency lists., • Accurately complete tenant requests, repair work and related records for the respective site/buildings as required. Follow applicable government / local authority requirements and other records for assigned properties., • Available for various shifts, to fill in for other staff, and to work extended hours, nights, weekends and holidays to ensure adequate building coverage and perform necessary repairs as needed. Respond to afterhours emergencies such as fire, flooding, severe weather (including but not limited to snow and ice removal) power outage and other related situations including clean-up activities per on-call procedures or as requested in critical situations., • Assist in the monitoring and implementation of OSHA requirements., • Perform other duties as assigned. DESIRED SKILLS AND EXPERIENCE: • Solid ability to safely and properly use the following tools: ladders, lifts, basic hand tools, multimeters, amp probes, anemometers (airflow meter and hood), pressure gauges, drain augers, plungers, safety goggles, ear protection and fire extinguishers., • Knowledge of the operation of heavy equipment such as chillers, generators, switchgears, pumps, air handling units, etc., • Effective interpersonal and customer service skills to work with customers, co-workers and outside vendors., • Effective time management and personal organization skills; works with a sense of urgency; able to meet deadlines., • Solid understanding of computer technology including email systems, mobile smart phones, memos and spreadsheets., • Professional, effective written and verbal communication skills. Requires the ability to read, write and speak English to interact with co-workers and tenants, give and receive direction and complete tasks and work orders., • Ability to comprehend, analyze and interpret documents. Capable of defining problems, collecting information, establishing facts and drawing conclusions at a level appropriate for the position., • Ability to add, subtract, multiply and divide common units of measure and apply these concepts to practical situations. QUALIFICATIONS: • Valid driver’s license and clean driving record required, • High school diploma or equivalent, • Minimum 3 years’ experience in the building operation/maintenance field preferred, • Universal EPA Refrigerant Handler License required, • NATE Certified HVAC Technician, • Refrigeration Operating Engineer or Stationary Engineer License required

Job DescriptionDescription: Come design with us! As an Entry Level Electrical Engineer, we provide a training program that allows you the ability to quickly become an active member of our engineering team with abundant opportunities to grow. We pride ourselves on collaborating as a team. You will work closely with project managers and various levels of experienced engineers and engineering managers. Get to Know Us:INTEGRITY | ENGINEERING EXCELLENCE | LEGACY Founded in 1949, Swanson Rink specializes in designing mechanical, electrical, fire protection, plumbing and technology infrastructure for data centers, airports and other complex buildings. Ranked among Building Design + Construction top Engineering Firms for both Airport and Data Center design four years running! Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Follow us on LinkedIn! What Can We Offer You for All Your Hard Work? • The opportunity to work on complex, exciting projects for high profile clients, • Focused training and professional development, mentorship, professional career growth opportunities, • Paid professional membership fees, tuition reimbursement, prep and exam coverage for certifications and licenses, • EcoPass/Commuter benefits (Denver), • Stock purchase plan, • Company paid holidays, Paid Time Off, paid parental leave, • Vision, dental and medical insurance with employer HSA contributions, FSA options, • Monthly technology allowance, • Traditional and Roth 401(k) with immediate vesting on matching contributions Your Job Responsibilities: • Design power systems, including layout and circuiting of receptacles, miscellaneous equipment, mechanical equipment, and completion of panel schedules., • Design lighting systems, including lighting fixture selection, layout, circuiting, and controls for interior and exterior applications., • Design of basic electrical one-line diagrams., • May engage in business travel for client meetings, field surveys, etc., • Participate in seminars and training events to stay current with industry trends. Requirements: Your Requirements and Qualifications: • A Bachelor's Degree in Electrical Engineering from an ABET accredited four-year college or university., • Certification as an EI/EIT required., • Requires the ability to pass background checks, security screenings or drug testing as required by our clients and/or Federal contracts., • Must be authorized to work in the United States. Salary range of $72,500 - $75,000 and will be based on several factors including experience, knowledge, skills, and abilities of the applicant. Equal Employment Opportunity/Veteran/Disability

Job DescriptionSalary: We at BranchPattern are committed to building our company with great people like you, people who represent the best in their profession. We are looking for talented minds with a common purpose, to improve life through a better built environment, to grow with us. BranchPattern is a place where you can make a difference while building a meaningful and rewarding career. Our employees are fun, passionate, and innovative change agents who strive to deliver award winning work. Our engineers work on technically demanding buildings such as healthcare, higher education, and other complex facilities, where electrical systems, technology, and infrastructure must work seamlessly together to support performance, reliability, and long term adaptability. We are seeking a dynamic Electrical and Building Technology Engineer who is early in their career and eager to grow across both electrical engineering and building technology. This role supports complex projects today while providing exposure to advanced electrical systems, building technologies, and emerging energy services. The ideal candidate is curious, adaptable, and motivated to develop deeper technical responsibility over time through mentorship and hands on project experience. Requirements • Bachelors degree in Electrical Engineering or Architectural Engineering., • 0 to 6 years of experience in electrical engineering, building systems, or related technical roles., • FE, EIT, or Licensed Professional Engineer (PE), or ability to obtain licensure., • Foundational understanding of electrical building systems and codes., • Strong interest in building technology, systems integration, and modern electrical infrastructure. Key Responsibilities Electrical Engineering Support • Support the analysis, design, and documentation of electrical systems for complex building projects., • Assist with power distribution, lighting, and essential electrical systems under the guidance of senior engineers., • Apply sound engineering fundamentals to support system performance, reliability, and constructability., • Participate in construction administration activities and coordination with contractors and design partners. Building Technology and Systems Integration • Support building technology scopes such as controls coordination, low voltage systems, and technology enabled building infrastructure., • Collaborate with project teams to help integrate electrical systems with building automation, controls, and data driven systems., • Assist in evaluating how emerging technologies and tools can support building performance and operations. Electrification and Forward Looking Systems • Support electrification related efforts such as load analysis, infrastructure readiness, and future proofing electrical systems., • Assist senior engineers with early stage studies and option analysis related to energy systems and building performance., • Contribute to decarbonization efforts as part of a broader, multidisciplinary team. Collaboration and Professional Development • Work closely with mechanical engineers, building scientists, architects, and other disciplines in a collaborative team environment., • Develop clear technical documentation and contribute to client deliverables., • Learn from senior engineers and actively pursue growth in both electrical engineering and building technology., • Stay current with evolving codes, tools, and best practices related to electrical systems and building technology. Desired Qualifications • Experience or strong interest in building technology, controls, or systems integration., • Exposure to healthcare or other technically demanding building environments is a plus., • Familiarity with NEC and electrical building codes., • Comfort working across disciplines and learning in a fast moving, collaborative environment., • Strong communication skills and a proactive, growth oriented mindset. BranchPattern is a great place to work! BranchPattern is an award-winning firm built by engineers and building scientists who genuinely care about improving peoples lives. We are advocates for building a better environment and community. Our employees are progressive, passionate and innovative change agents that strive to deliver high quality projects. If you are ready to make a difference and improve the lives of our communities apply today. • Flexible work hours that allow you to balance work and life., • Casual work environment where you can dress for your day., • Employee ownership and the freedom to be an entrepreneur., • Paid volunteer time and parental leave so you can care for others., • Paid birthday holidays and wellness initiatives so you can care for yourself., • Genuine and progressive leadership who put people first., • Clear career paths and mentors that want you to excel., • Paid certifications and memberships to build your leadership in the industry., • Fully paid medical, dental, and vision insurance for all employees., • Employee Stock Ownership Plan (ESOP) Shares and Profit Sharing., • 401k with a company match. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin.

Job Description The Electrical Engineer is responsible for electrical planning, designing, engineering and construction document production and project estimates. Additional duties include energy analysis, lighting analysis, cost/benefit analysis, electrical systems design, existing system condition assessment, and emergency/standby generation design. This position reports to the Director of Engineering. The Fundamentals • Apply knowledge and experience with building codes, regulations and requirements, building materials, construction methods, and procedures to all projects. Ability to manage the proper sequencing of construction documents., • Manage multiple, simultaneous projects from beginning to end, such as Design Basis through specifications and submittals., • Able to work well in a team/collaborative setting, make sound decisions and drive action cross functionally., • Able to organize and prioritize personal workload in a dynamic, fast-paced environment to meet deadlines., • Comfortable making independent decisions with general guidelines., • Demonstrated exceptional planning, analytical and problem-solving skills; ability to apply logical steps to problem solving., • Able to work with modest supervision and guidance, • Possess a professional demeanor while interacting with clients, partners and team members., • Able to function effectively in a demanding environment and manage multiple projects simultaneously., • Demonstrated strong verbal and written communication skills; skilled with making presentations to clients., • Possess a professional demeanor while interacting with clients, partners and team members, • Experience in higher education, office and/or light manufacturing, • Bachelors degree in Electrical Engineering from an accredited institution, • Minimum five years of experience in facility design, • Experience in power distribution, lighting design, communication systems and data centers, lighting photometric calculations, existing building assessments/reports., • Professional license is preferred, • Must be proficient in Revit, Microsoft Office (Word, Excel, Access, Outlook), AutoCAD and specialized electrical engineering software (e.g. Easy Power), • Work is performed in an office setting and in the field; job site monitoring may be performed in various weather conditions., • Occasional travel may be required, • Able to move around construction sites in various stages of development from excavation to completion and beyond., • Work is performed in an office setting and in the field; job site monitoring may be performed in various weather conditions., • Occasional travel may be required, • Activities may be necessary outside of the normal office hours depending on workload, schedules and client geographical location. Annual base compensation for this position is $90,000 - $110,000 based on experience

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job title - Substation Physical DesignerJob location - Denver, CO (Centennial) \u007C or Muscatine, IAJob type - Hybrid or OnsiteRequisition ID - 11184 JOB SUMMARY: Primarily functions as substation physical designer to create equipment plan, elevations, conduit/trench plan, grounding plans, installation details, bill of materials, and conduit schedules drawings on projects. Drawings created by designer should be substantially complete, requiring limited review and mark-up by the engineer prior to completion. Fully developed and marked-up details would not be provided by the engineer; the designer would be expected to utilize the results of calculations, design criteria, scope of work and specifications in preparing the drawings with the engineer’s verbal overview of what is needed. What You Will Be Doing: • Perform NESC - clearances, spacing, lighting levels, • Perform IEEE 80 - grounding calcs & CDEGS, • Perform IEEE 605 - bus calcs, • Perform IEEE 998 & NFPA 780 - lightning protection Calcs, • Utilize CAD in 2D or 3D to create drawings, • Gather information from manufacturers and vendors drawings for substation design, • Create general arrangement from one-line diagram, • Create plans and elevations from general arrangement, • Prepare preliminary foundation plan, • Create grounding plan and conduit/trench plan from general arrangement, • Create bill of material and populate plans and elevations with corresponding call-outs, • Create grounding and conduit details and associated bill of material, • Create conduit schedules, • Coordinate the physical design with civil, steel structures and foundations designs, • Complete drawings from conceptual development, design phases, construction, to as-built, • Provide drafting support on other disciplines drawings, • Provide technicians and designers with design sketches for preparation of finished design drawings, and guidance in refining technical requirements, • Assist in the training of other technicians and designers, • Performs other work-related duties as assignedRequired Qualifications:, • Minimum of 10 years relevant design experience, or able to perform essential duties successfully, and meet the following qualifications, • Certificate or Associates degree in CADD, drafting, engineering technology or related field, • Proficiency with AutoCAD and Microstation, • Autodesk Inventor and/or Bentley Substation 3D software knowledge is a plus, • Excellent communication, collaboration and coordination skills with drafting and engineering, • Good understanding of what is required for project set-up and start-up, • A thorough understanding of the physical design package and how changes in each drawing will carry through to other drawings and disciplines., • RUS design guide – General overall knowledge of voltage levels, ampacity, fault current, typical station layouts, bus arrangements & protection schemes, • Thorough knowledge of bus configuration types and purposes, • Thorough knowledge of common major equipment applications, types, ratings, manufacturers, specifications and installation requirements, • Thorough knowledge of common conductors, hardware, fasteners and assemblies including application, types, ratings, manufacturers, specifications and installation, testing and commissioning requirements, • Good understanding of steel structures and foundations used in substations, • Thorough understanding of construction & maintenance methods, requirements, sequences and limitations MANAGERIAL SCOPE: Responsible for schedule and budget management of assigned tasks. Work-Life Balance We realize there’s more to life than just work. We help you meet the demands of work, family and personal life through several flexible options. What we offer:Member-Owned. Member-ownership is at the heart of our culture, aligning client satisfaction, company performance, and personal reward.Paid Time Away. Stanley Consultants offers numerous paid holidays, generous paid time off (PTO), parental leave, and professional development leave.Health Insurance. We provide a comprehensive insurance package including medical, dental, vision, FSA, HSA, Doctor On Demand, wellness reimbursement, and mental health resources.Financial Health. We offer life insurance, short- and long-term disability insurance, identity theft protection, and many other benefits.Professional Growth. When your skills grow, so do we, which is why we offer tuition assistance, professional society membership, and more.Financial Rewards. We share our prosperity with members through company stock ownership, a generous 401K match, incentive compensation, and profit-sharing contributions to retirement 401K plans.Click Here: A Great Place To Work Learn more about Stanley Consultants in this short video: Working at Stanley Consultants Stanley Consultants does not welcome unsolicited resumes from staffing and recruiting agencies. Any unsolicited resumes submitted to Stanley Consultants, including but not limited to resumes submitted directly to Stanley Consultants members, or any of our representatives, will be deemed the property of Stanley Consultants. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c) We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Candidate will provide electrical design for water and wastewater facility projects. Qualified candidate should have an interest in industrial power systems design, including low voltage electrical power distribution, motor control, VFDs, lighting systems, equipment layout and related activities. Candidate should have familiarity with the NEC and related Codes. Candidate must also have good communication skills. Candidate will serve as an electrical designer on projects for water and wastewater facilities. Responsibilities include executing redline markups from more experienced engineers, sizing conduit and wire, laying out electrical distribution equipment, designing lighting systems, and interaction with engineers from other disciplines. Additional Qualifications/Skills: • Experience with Autocad and Revit BIM software is desirable, • Experience with Microsoft Office products is required, • Experience with SKM and/or ETAP software is desirable, • 0-4 years of experience required, • Passing or having the ability pass the Fundamentals of Engineering exam is desirable Educational Requirements:

Job Description Electrical Engineer Our Electrical Engineering team is looking to add an experienced team member to our group of talented engineers. The Electrical Engineer builds on foundational experience to take independent ownership of portions of project design, documentation, and coordination. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role is trusted to perform electrical engineering tasks with minimal supervision and supports project delivery from concept through construction. Electrical Engineer serves as a technical contributor and emerging mentor, contributing to electrical calculations, code research, QAQC, and coordination across disciplines. Individuals in this role are expected to deepen their technical knowledge, begin supporting client interaction, and develop the critical thinking required for future engineering leadership roles. Essential Functions: • Lead design development and electrical calculations for assigned electrical systems across schematic, design development, and construction document phases., • Independently perform lighting and power load calculations, feeder sizing, short circuit studies, and NEC compliance checks with minimal input., • Prepare technical documentation for electrical systems, including system descriptions, Division 26 specifications, equipment schedules, and redline markups., • Develop and review electrical system layouts in Revit—including power, lighting, fire alarm, and single-line diagrams—in coordination with architectural and structural backgrounds., • Coordinate electrical design with internal disciplines (mechanical, plumbing, lighting, sustainability) and external consultants (e.g., low voltage, civil) to resolve design conflicts., • Review and respond to electrical RFIs and submittals, with support from senior engineers as needed., • Perform field verification for electrical conditions, assist with punch walks, and participate in electrical construction observation visits., • Participate in early-phase project design strategy discussions and support electrical discipline leads with technical input., • Engage in internal QAQC processes and perform peer reviews of electrical drawings and documentation for code compliance and drafting consistency., • Begin mentoring electrical designers and interns on software use, modeling best practices, documentation standards, and calculation basics., • Participate in internal and external project meetings, and support the preparation of agendas, meeting minutes, and follow-up documentation with a focus on electrical scope., • Bachelor’s degree in electrical engineering or equivalent required., • P.E. licensure required., • 5+ years in the AEC Industry required along with previous experience developing electrical solutions for crime labs, medical examiner labs and other comparable facilities - required., • An understanding of the financial status of projects as they progress, development of cost budgets for projects, value of client relationships and be able to deliver projects with a focus on the quality is preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills required., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Ability to work well with others under deadline situations required. Physical Requirements • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. #LI-DD1

Job Description Electrical Engineer Denver, CO (Downtown) Direct Hire/ Permanent Placement 80k-160k (Jr-Sr. level roles open), Hybrid, Medical, Dental, Vision, FSA, 401(k) match, Bonus 50+ year old mid-sized firm specializes in designing mechanical, electrical, plumbing, fire protection, and technology infrastructure projects for large scale projects like data centers, airports, and other complex buildings. ROLE/ RESPONSIBILITIES • Electrical design of power distribution, lighting, fire alarm in accordance with NEC codes and standards, • Electrical equipment calcs, selection, and layout of switchgear, transformers, electrical panels, emergency generators, UPS., • one-line diagrams, short circuit, voltage drop calcs, • Project Management REQUIRED SKILLS AND EXPERIENCE • Bachelor’s degree in Electrical Engineering, Architectural Engineering, or similar, • REVIT, AutoCAD, • 3+ yrs. of US industry experience post degree, • EIT or PE (highly preferred), • ITAR Compliant – Federal clients, must be eligible to work without any VISA sponsorship

Job Description Control Systems Engineer- Senior This position is located On-site in our Denver Colorado location. The Control Systems Engineer – Senior is responsible for the design, development, integration, and validation of advanced electronic control systems for maritime applications. This role leads complex engineering efforts, supports cross-functional collaboration, and ensures delivery of high-quality, compliant, and innovative automation and power systems. The position requires strong technical expertise, leadership capability, and the ability to work autonomously on complex assignments. Roles and Responsibilities: • Design, develop, and test electronic control systems for remote and autonomous maritime operations., • Create and implement technical designs, including control schematics, process diagrams, and automation logic., • Configure and program PLC/HMI systems and develop control software using CAN bus protocols., • Analyze system performance through modeling and testing; troubleshoot and resolve technical issues., • Design marine electrical power generation and distribution systems and integrate C5i technologies into vessel platforms., • Collaborate with customers, vendors, and cross-functional teams to support design development and execution., • Ensure compliance with contract requirements, engineering standards, and ABS regulations., • Manage engineering changes (ECR/ECN), review and approve design documentation, andmaintainconfiguration control via PLM systems., • Partner with quality and production teams to resolve installation issues and support production readiness., • Lead and mentor a small team; review work for technical accuracy andstandards ofcompliance., • Drive continuous improvement throughthe developmentof best practices, documentation, and process enhancements., • BS degree preferred in Electrical Engineering or similar, • 10+ years of control system design to include feedback control systems using CAN bus protocol, • Desire marine electrical knowledge to include power generation, power distribution, navigation, communication, video, equipment installations, junction box installation, cable routing, cableways and penetrations, and lighting systems, • Experience with MS Office, BC Dynamics, AutoCAD, Zuken, Python, PDM, PLM, MRP,Sharepoint, and Access, • The ability to work unsupervised efficiently and effectively, • Have excellent communication, teamwork, leadership, conflict management, and critical thinking skills, • 5 years program management experience, • Ability to be lead technical advisor to achieve scope, cost, and schedule targets, • Ability to pay attention to detail and to work on complex configurations Health/Dental/Vision EAP/Life STD/LTD 401(k) with company match (pre- and post-tax options) Vacation/Sick accrual and holiday pay Tuition reimbursement program Employee referral program Pet Insurance Birdon is committed to the HEALTH and SAFETY of our workforce and to the ENVIRONMENT we expect this same commitment from all employees. Birdon America Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Know Your Rights. The Company invites any applicant and/or employee to review the Company’s written Affirmative Action Plan. This plan is available for inspection upon request by emailing . If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact for further assistance

Job Description$15.16-$15.16 TAKE-AWAY Compensation: -$15.16-$15.16. Tip eligibility. -Per the Colorado Constitution, this employer claims tip credit per Colorado standards. Join for the Fun, Stay for the Career! If you are looking for a great place to work, have fun, and make money mate, click to apply. Come join the Outback family as an Outbacker, where you will make memorable first and last impressions with all our customers. You will support our commitment to bringing the best of who we are to deliver perfectly tailored service to each and every guest. As an Outbacker, you’ll help to provide each customer with an AUS-SOME dining experience in the restaurant, that makes each guest’s day better. BENEFITS: • Comprehensive health insurance (medical, dental, vision) for employees eligible under ACA measurement rules., • Accrued Paid Sick Leave: up to 48 hours of paid sick leave per year, required under the Healthy, Families and Workplaces Act (HFWA). This benefit is for use of a variety of health- and safety-purposes, which employees “earn” at a rate of 1 hour of leave for every 30 hours worked., • Growth Opportunities! Shift Leader program with extensive on the job training., • Hospitable culture that recognizes hard work, effort, perseverance and leadership., • Closed Thanksgiving & Christmas Day to spend the day with family & friends., • Flexible Schedule., • Meal discounts., • Company sponsored Employee Assistance Program., • We are the largest franchisee of Outback Steakhouse., • Makes memorable first and last impressions with a smile., • Uses food and beverage menu knowledge to share favorites and provide recommendations.., • Answers the phone in a prompt and professional manner., • Demonstrates teamwork by supporting all areas of the restaurant as business needs arise, ensuring every opportunity to WOW our guests is fulfilled. Teamwork is essential and expected of all Outbackers., • Accurately processes orders, accepts payment in a friendly and timely manner, anticipates guests needs while ensuring each order is complete and correct., • Ability to lift, carry or move up to 30 lbs., • Able to work in hot and cold environments., • Ability to walk and stand for extended periods of time, up to 8 hours per shift., • Frequent bending, reaching, kneeling, squatting and stooping., • Manual dexterity to handle glassware, utensils and technology systems., • Ability to move quickly in a fast-paced environment., • Visual ability to include distance, close, color, depth and peripheral. Also, the ability to adjust focus as needed. The role involves working in areas with low or dim lighting., • Ability to perform essential functions of the job with or without reasonable accommodation. All newly hired employees are subject to and must successfully complete the Electronic Employment Eligibility Verification Program (E-Verify). You can view the E-Verify Participation and Right to Work poster at ABOUT US: We are Out West Restaurant Group, the largest franchisee of Outback Steakhouse in the United States. Outback Steakhouse is an Australian theme restaurant that opened in March of 1988. At Outback Steakhouse we take food seriously, without forgetting the fun and we are proud to do things uniquely and strive to positively impact the lives of our people we call “Outbackers”. We believe if you treat people “Just Right” then success is sure to follow. It’s a culture of respect and camaraderie that breeds enthusiasm. We start with indulging each customer like a guest in our own home. We continue by committing to the success of each and every Outbacker to be trained to the best of their ability. Out West Restaurant Group is an equal opportunity employer. We do not discriminate based on race, color, religion, sex, national origin, age disability, or any other protected status. All employment decisions at Outback are based on business needs, job requirements and individual qualifications without regard to any characteristic protected by both federal and state laws. We are committed to fairness, respect and opportunity for all employees. Monitor 200 Award-Ranked in Top 50 Franchisees in the U.S., 4 years in a row. International Franchise Association’s Franchisee of the Year Award 2022, for Exemplifying Excellence in Local Community Service. Proud contributor to non-profit organizations, California Care and CORE. Both organizations do incredible work, providing essential support to restaurant employees and their families during challenging times. There is no fixed deadline for applying for this position.

Job DescriptionSalary: BranchPattern is an engineering and building science firm committed to creating spaces that perform at the highest level, technically, environmentally, and humanly. Our Technology group sits at the intersection of built-environment expertiseand emerging digital intelligence, delivering ICTandSecurityon projects across the country. Wedon'tjust designbuildingsystems; we shape how people experience buildings. We are scaling. Our 10x vision is not a metaphor; it is a strategic roadmap to grow our practice into a nationally recognized leader in smart, human-centered building technology consulting. To get there, we need people who are technically sharp, intellectually curious, and motivated by the idea that buildings can, and should, work better for the humans inside them. This is not a siloed drafting position. This is a role for someone who wants to own the technical narrative of a project from schematic design through construction administration and who understands that great ICT and security design is inseparable from great architecture. As an ICT & Security Consultant / Designer, you will serve dual roles: a hands-on technical designer producing construction documents and specifications, and a consulting partner engaging clients, coordinating with multidisciplinary teams, and translating complex infrastructure into clear, actionable design intent. You will be an active contributor toBranchPattern's growth, participatingin business development, client relationships, and thought leadership as we expand our presence. Design & Technical Delivery • Lead and produce ICT system designs: structured cabling (ISP/OSP copper and fiber), horizontal distribution, telecom room layouts,bondingand pathways, • Design and specify security systems including Access Control, Video Surveillance (CCTV/IP), and Intrusion Detection, • Author complete construction document packages schematic design through 100% CDs including drawings, specifications, and basis-of-design narratives, • Develop network topology diagrams and schematic interface documents supporting integrated ICT, AV, security, and smart building infrastructures (BMS, EMS, lighting), • Perform construction administration: respond to RFIs, review submittals, supportcommissioning,and close-out, • Conduct site surveys and existing condition assessments to inform design decisions, • Produce deliverables in Revit and AutoCAD;proficiencyin BIM coordination expected Consulting & Client Engagement • Serve as a primary technical contact for clients across sectors, including education, healthcare, commercial, and civic, • Lead project meetings, present design concepts, and translate technical requirements into compelling, client-ready narratives, • Coordinate closely with architects, MEP engineers, AV consultants, and general contractors to deliver seamlessly integrated solutions, • Participate in business development activities, including RFP responses, client presentations, and market outreach upon request., • Contribute toBranchPattern's external presence, white papers, industry events, thought leadership content, as the firm scales its profile nationally Team & Practice Development • Mentor junior designers and support a culture of continuous technical growth within the Technology group, • Perform QA/QC review of ICT/security design documents, • Stay current on emerging technologies and embed innovation deliberately, not just for novelty, but in service of better building performance, • Maintain and expand knowledge of TIA/BICSI standards, IBC, NFPA, and relevant codes Required Qualifications • 3+ years of experience in ICT and/or security systems design within an A/E consulting environment, • Demonstrated experience designing structured cabling (ISP/OSP), access control, video surveillance, and intrusion detection systems, • Proficiencyin producing full construction document packages including drawings and specifications, • Experience working within multidisciplinary design teams (architects, MEP, structural), • Strong client communication and presentation skills comfort in front of a room is essential, • Proficiencywith Revit and/or AutoCAD; Bluebeam Revu; Microsoft Office Suite, • Bachelor's degree in Electrical Engineering, Technology, Telecommunications, or a closely related field, or equivalent demonstrated experience Preferred Qualifications • RCDD (Registered Communications Distribution Designer) strongly preferred, • PSP (Physical Security Professional) or CPP credential, • BICSI DCDC, OSP, or RTPM credential, • Experience with BIM coordination and smart building network integration (BMS, EMS, metering, lighting control), • 10+ years of experience for a senior-level consideration BranchPattern is a great place to work! We are building a practice that thinks differently about built environments. The people who do well here are not just technically excellent, they'recurious about why systemsfail toservepeople, andmotivated to do something about it. They bring a point of view to their work. Theyaskhard questionsindesign reviews. They see business development not as a distraction from craft but as an extension of it. If you are looking for a seat at abigfirm where you execute the same playbook on repeat, this is not that. If you want to help define what smart building consulting looks like as the industry matures, and to grow your career in step with a firm that is growing strategically and intentionally, we want to hear from you.If you are ready to make a difference and improve the lives of our communities, apply today. • Flexible work hours that allow you to balance work and life., • Casual work environment where you can dress for your day., • Employee ownership and the freedom to be an entrepreneur., • Paid volunteer time and parental leave so you can care for others., • Paid birthday holidays and wellness initiatives so you can care for yourself., • Genuine and progressive leadership who put people first., • Clear career paths and mentors that want you to excel., • Paid certifications and memberships to build your leadership in the industry., • Fully paid medical, dental, and vision insurance for all employees., • Employee Stock Ownership Plan (ESOP) Shares and Profit Sharing., • 401k with a company match. Anticipated salary range for this position may be $75,000 - $120,000 per year. Salary may be higher or lower than the stated range depending on factors unrelated to the applicants race, color, religion, gender, sexual orientation, gender identity, national original, ethnicity, age or disability. Salaries can vary from this range based on geographic cost of labor, cost of living and more. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin.