Maintenance jobs in Grand Prairie, TX - Page 14Create job alerts

WEST ARBROOK BLVD [Maintenance Worker / Facilities] As a Maintenance Clerk at Costco, you'll: Build and repair fixtures and structures; Repair plumbing and electrical systems under 24 volts; Perform routine maintenance and repairs for forklifts, machinery and equipment for both ancillary businesses

Job Description Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping and snow removal, we enable desired outcomes for our clients through consistent service and outstanding people. We are seeking to hire a Day Cleaner/Engineer Assistant. You will be responsible for performing vacuuming, mopping, sweeping floors, trash removal rest room and break room cleaning and other miscellaneous duties to ensure that building and facilities are maintained in a healthy, safe and sanitary manner. In addition to cleaning duties, you will be responsible for assisting the building engineer with tasks such as light bulb changing, carpet square replacement, ceiling tile replacement and other minor engineering jobs. Ideal candidate will have professional attitude & appearance and is self-motivated, hardworking, dependable, and responsible. Job Requirements • Must be able to follow instructions from supervisor and complete all tasks effectively., • Prior cleaning experience is a plus., • Must be able to lift at least 50 pounds., • Janitor experience a plus but will train., • Full-Time, • Pay rate $16.00-$18.00, • Hours: Monday - Friday 8:00am - 5:00pm, • Health Benefits Package, • Ancillary benefits—Life insurance, Long Term Disability, FSA and Dependent Spending care, • 401K, • Opportunity for growth Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability, or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law. #LI-DNI

ABOUT THE ROLE \n Operates straight or articulated rubber-tired tractor-type vehicle equipped with front-mounted hydraulically powered bucket or scoop to lift and transport bulk materials to and from storage or processing areas. This is a portable plant position in Fort Worth, TX WHAT YOU'LL ACCOMPLISH \n\n • Starts engine, shifts gears, presses pedals, and turns steering wheel to operate loader. Moves levers to lower and tilt bucket and drives front-end loader forward to force bucket into bulk material. Moves levers to raise and tilt bucket when filled, drives vehicle to work site, and moves levers to dump material.\n, • Perform assignments outlined by supervisors and standard procedures are followed in the performance of duties. Work is inspected periodically for safety and economy in operation. Performs routine maintenance on loader, such as lubricating, fueling, and cleaning.\n, • Maintain an effective system of communications with supervisors and customers serviced.\n, • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors.\n\n WHAT WE'RE LOOKING FOR \n Education: High School diploma or equivalent, please note that equivalent years of relevant work experience may be considered in lieu of a degree. \n Additional Experience: 2 years experience directly related to the duties and responsibilities specified. Additional Requirements: \n\n • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.\n\n WHAT WE OFFER \n\n • Competitive salary\n, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings\n, • Medical, Dental, Disability and Life Insurance \n, • Holistic Health & Well-being programs\n, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care\n, • Vision and other Voluntary benefits and discounts\n, • Paid time off & paid holidays\n, • Paid Parental Leave (maternity & paternity)\n, • Educational Assistance Program\n, • Dress for your day\n BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at [email protected] \n • Notice: Know Your Rights: Workplace Discrimination is Illegal\n, • Notice: Pay Transparency Nondiscrimination (English)\n, • Aviso: Transparencia en el Pago No Discriminacion (Spanish)\n\n Job Description: Job Summary: The Quality Inspector A is responsible to ensure compliance with Airbus Helicopters Inc. policies, procedures and Federal Aviation Authority (FAA) and/or European Aviation Safety Agency (EASA) regulations as applicable. This role performs preliminary, hidden damage, in-process and final inspections; performs receiving inspections approving or rejecting incoming materials through established receiving inspection processes while recording quality inspection results; is required to work with inspection tools, aids and devices to resolve tolerances and specification limits; and is responsible for performing detailed inspections of parts, materials, paint, backshop activities, functional tests, operational test and dimensional inspections to of aircraft, systems and components to determine airworthiness. Primary Responsibilities: Inspection: 60% \n • Perform required technical inspections to receive or reject incoming material, airframes, aircraft components and to detect/report suspected unapproved parts\n, • Perform in-process inspections for components in electrical backshops, manufacturing, composites, MRO and paint shop to judge the serviceability or rejection of manufactured parts, electrical components, and paint\n, • Perform detailed inspections of manufactured components such dimensional checks and acoustic tap testing\n, • Inspect aircraft aluminum, titanium or steel structures for cracks, corrosion, damage and improper assembly.\n, • Resolve accurate shimming and joining of structures with rivets or other hardware in design drawings, engineering disposition, and other approved data\n, • Detect hidden damage during inspections of airframe structures, components and sub-assemblies that could occur during shipping, receiving, or manufacturing\n, • Verify build of aircraft system wiring harnesses, connectors and electrical terminations as per design drawings\n, • Physically and systematically quarantine non-conforming components and assemblies identified during inspections\n, • Supervise the use of Measuring and Test Equipment to ensure it is well maintained and current relative to its calibration cycle\n, • Perform stock inspections/purges when advised of possible non-conforming/suspected unapproved material\n, • Evaluate and disposition sales returns\n, • Select product samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications etc.) to validate conformity to approved drawings and manuals\n, • Accomplish in-process and final quality inspections for conformity, maintenance, repair, modification, rework and overhaul of aircraft components and sub-assemblies\n, • Perform conformity inspections for Supplemental Type Certificated (STC) development projects, parts manufacturer approval (PMA) parts, structural and electrical components\n, • Inspect multiple airframe components to determine proper fit, form and function of the components\n, • Validate disposition of parts or repaired parts routed to shop floor, from warehouse, internal shops and suppliers for conformity and serviceability in accordance with approved data\n, • Qualify dynamic component parts applying visual inspection and precision measurement methods.\n, • Observe and validate instrument connections, functional or operational tests, adjustments of aircraft radios, navigational systems and flight control systems and instruments to ensure they meet required specifications\n, • Ensure compliance with all applicable calendar/hourly inspections, life limited or cycle limited components, airworthiness directives and alert service bulletins\n, • Verification of testing for emergency locator transmitters (ELT), Transponders, Altimeters, Airspeed Indicators and Air Data Computers in accordance with Title 14 CFR Parts 91, 135 and 43\n\n Documentation: 30% \n • Ensure proper tagging, identification and airworthiness of parts released to Airframe, Engines, and Accessories\n, • Compare quantity, part number, and serial number of items received with procurement data, purchase orders and other specifications to ensure accuracy and completeness\n, • Create, distribute, track in SAP and disposition the monthly Shelf Life Expiration Date (SLED) report as directed\n, • Create NCM's for non-conforming material detected and coordinate with Quality Engineers on non-conformity resolution\n, • Ensure all materials have required documentation (i.e. 8130-3, EASA Form, Certificate of Conformance)\n, • Process Goods Receipts during receiving of material\n, • Document applicable maintenance actions for airframe, engine, accessories and components in accordance with FAA and EASA approved regulations and company procedures.\n, • Research airworthiness directives, service bulletins, and alert service bulletins for applicability to aircraft and/or components\n, • Read and validate engineering drawings, reports, and test specifications\n, • Properly identify and document items in quality quarantine cage\n, • Document and prepare airframe, engine, accessories or components for return to service after production, maintenance, overhaul, repair, inspection, test or modification\n, • Compose and prepare required delivery documentation in relation to qualifying the airworthiness or return to service of aircraft, engines, parts, components and systems\n\n Quality Department Support/Continuous Improvement: 10% \n • Apply Airbus Core Values to create an environment for success, set the example, uphold the standard and welcome challenges while maintaining integrity, commitment, confidence, teamwork, customer focus, respect and reliability\n, • Perform routine process audits to ensure necessary training, tooling and technical data are available for task completion\n, • Review quality procedures, processes, documents and forms used during daily activities for accuracy and completeness\n, • Ensure compliance with company policies, procedures and FAA & EASA Regulations\n, • Support Company events, departmental meetings, special projects and team meetings\n, • Demonstrate creativity by proposing innovations using lean methodologies to ensure that top company objectives (TCOs) are met\n\n Additional Responsibilities: • Other duties as assigned at management discretion\n Qualified Experience and Training: Education: Required • Associates Degree or equivalent experience in Aviation or related industry\n Experience: Required • Minimum 6 years or equivalent diversified experience on Airbus Helicopters products as either a certificated AMT or quality inspector\n Licensure/Certifications: Required • Current/Valid FAA Airframe & Power Plant License\n, • FAA Inspection Authorization (IA)\n, • FCC 2nd Class License\n, • Non Destructive Inspection (NDI) Certificate\n\n Travel Required: • 15 % Domestic and International\n Citizenship • US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license)\n Clearance: • None\n Qualified Skills: Knowledge, Skills, Demonstrated Capabilities: Required \n • Ability to interpret technical and regulatory documentation\n, • Ability to effectively communicate verbally and in writing with all levels of personnel\n, • Familiar with inspection tools, aids and devices used in determining tolerances and specification limits\n, • Have the experience and flexibility to work in multiple areas\n\n Communication Skills: Required: • Proficiency in French, German or Spanish\n Technical Systems Proficiency: Required: • Microsoft Office Suite (Excel, PowerPoint, Word and Access)\n, • Adobe Acrobat\n, • SAP\n, • Smartsheet\n, • G Suite\n, • OCE/ARAS/Bflow\n, • T.I.P.I\n, • Onbase\n, • Orion eTechPub\n\n Complexity of the Role: Level of Decision Making: • Quality inspectors must routinely evaluate the airworthiness of aircraft and/or articles, serviceability of repairs, inspections, maintenance and safety of operation. This includes, but is not limited to, loss prevention of revenue, property or life. This position requires a high-degree of independent decision-making and integrity and may include making command decisions regarding safety of flight or operation of aircraft. Inspectors also routinely collaborate with managers, customers, suppliers, technicians, engineering and other departments for inspection related decisions.\n Organizational information: Quality Inspector A's priorities will be established by the department management. This position will report to the Supervisor, Quality Assurance who will manage principal activity. This person will have the flexibility and background to fill in for various inspection vacancies as they occur. Direct Reports: Is this a people manager? No of Exempt Reports: 0 of Non-exempt Reports: 0 Job Dimensions: \n • This position is directly responsible for ensuring the airworthiness and quality of each aircraft assigned to them, which has a direct impact on company profitability and risk prevention.\n, • Has direct contact with internal customers and suppliers during shipping/receiving inspection of aircraft kits and material\n, • Has the responsibility for generating/documenting of Non-conforming products, articles, and material when identified during routine inspections that supports and improves the overall quality of company products\n, • This position requires a professional individual who is knowledgeable, trustworthy, and personable with a customer and company advocacy mentality\n\n Nature of Contacts: • Moderate Communication on a frequent Basis with internal and external parties\n Physical Requirements: \n • Onsite: 100% unless on business travel.\n, • Vision: able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings daily. Must have correctable near and far vision if applicable.\n, • Hearing: able to hear to participate in conversations in person and via teleconference or phone and able to hear sounds on production floor including safety warnings or alarms daily.\n, • Speaking: able to speak in conversations and meetings, deliver information and participate in communications daily.\n, • Equipment Operation: able to operate most office and personal electronic equipment and some tools daily.\n, • Carrying: able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs daily.\n, • Lifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs daily.\n, • Pushing / Pulling: able to push and pull small office furniture and some equipment and tools daily.\n, • Sitting: able to sit for long periods of time in meetings, working on computer several times a week.\n, • Squatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. Daily\n, • Standing: able to stand for discussions in offices or on production floor daily.\n, • Travel: able to travel independently and at short notice 15% or less yearly.\n, • Walking: able to walk through office and production areas including uneven surfaces daily.\n, • Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site\n\n This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Helicopters, Inc. Employment Type: Permanent Experience Level: Professional Remote Type: On-site Job Family: Quality Inspection Job Posting End Date: 10.10.2025 Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can term...

Description \n\t\t\t\t\t A security technician installs, maintains, tests, and repairs physical and digital security systems, including access control, video surveillance (CCTV), intrusion detection, and computer network security tools. Key responsibilities involve reading blueprints, wiring low-voltage circuits, troubleshooting system malfunctions, performing preventive maintenance, providing user support, and managing documentation and parts inventory. The role requires strong technical skills, the ability to interpret technical manuals, a valid driver's license, and often involves physical work and adherence to safety protocols. \n\nInstall, test, troubleshoot, repair, and maintain all Security systems at customer sites.\nInstallation will include, but not limited to: Video Surveillance systems, IP and Analog cameras, wireless, Access Control panels, Intrusion Panels, magnetic locks, card readers, motion sensors, door contacts, electric door strikes, etc.\nPerform assigned projects within scope, in a timely manner, and on budget.\nProvide customers with system operation and training.\nExcellent attention to detail including maintaining concise daily records and following of operational standards and practices.\nCoordinate with Project Management and Field Technicians for project scheduling. \n\t\t\t\t\t Skills \n\t\t\t\t\t access control, installation, alarm installation \n\t\t\t\t\t Top Skills Details \n\t\t\t\t\t access control,installation,alarm installation \n\t\t\t\t\t Additional Skills & Qualifications \n\t\t\t\t\t Must have PPE before starting: Hard hat with chin strips ($20-$200 which they don't have to have an expensive one), safety glasses, steel toed shoes, vest, \nIn general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job.\n\nWhile performing the duties of this job, the employee is regularly required to stand, climb, walk, sit, push, pull, squat, crawl, and stoop. The employee is regularly required to use hands to finger, handle, feel objects, and type on keyboard; reach with hands and arms; talk and hear. Specific vision abilities required by the job include close vision, distance vision, depth perception, and the ability to adjust focus. The use of power tools will be required to effectively perform this position. The employee must occasionally lift and/or move up to 50 pounds \n\t\t\t\t\t Experience Level \n\t\t\t\t\t Intermediate Level Pay and Benefits The pay range for this position is $25.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Arlington,TX. Application Deadline This position is anticipated to close on Sep 18, 2025. h4>About TEKsystems:\n\n We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. \n\n The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. \n\nAbout TEKsystems and TEKsystems Global Services \n\n We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. \n\n The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Maintenance Repair Tech We are looking for a Maintenance Repair Tech to join our Grand Prairie, TX shot peening facility! As our Maintenance Repair Tech, you will ensure machines are running at optimal performance. This is a great role for an individual with some maintenance and fabrication (welding) experience who wishes to expand their knowledge, particularly in preventative maintenance, and robotic machines. Location: Grand Prairie, TX Shift: Monday-Friday Hourly Rate: $23-$27/hour Please note that the salary range information provided is a general guideline only, reflecting a position based in TX. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge: \n • Read blueprints and schematic drawings to determine work procedures\n, • Work within precise limits or standards of accuracy.\n, • Follow instructions and read blueprints.\n, • Safely work at heights.\n, • Use logical step-by-step procedures in work.\n, • Plan work and solve problems.\n, • Make decisions based on measurable information.\n, • Perform a variety of duties which may change often; and operate machinery.\n, • Repair pumps, large conveying augers, dust collectors, blast rooms.\n, • Assemble machinery and bolts, welds, rivets, or otherwise fastens them to foundation or other structures, using hand tools and power tools.\n, • Experience constructing and /or repairing industrial machines\n, • Machine trouble shooting skills\n, • 2 + years of maintenance experience\n, • Experience with mechanical repair, fabrication, electrical work, PLC controls\n Our Values Environmental, Social and Governance Curtiss-Wright Surface Technologies ("CWST") is the group name for the collective technical services provided by the legacy companies of Metal Improvement Company("MIC"), E/M Coating Services, Everlube Products, FW Gartner Thermal Spraying, Para Tech Coating, Component Coating & Repair Services, Bolt's Metallizing, Keronite, and IMR Test Labs. CWST is a Division of Curtiss-Wright Corporation, a global innovative company that delivers highly engineered, critical function products and services to the commercial, industrial, defense and energy markets. To learn more, please visit us at Surface Treatment and Metal Improvement | CWST *Please note, benefits are country specific and may vary from location to location. #LI-BR #IND No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

ServiceMaster Clean - [Maintenance Mechanic] As a Maintenance Technician at ServiceMaster Clean, you'll: Exceed the expectations of the customers through service delivery; Be on time for appointments; Maintain cleanliness and order of assigned service vehicle; Perform regular maintenance on equipmen

Job Description We offer a great benefits package! Medical, Dental & Vision Insurance; 401(k); and Group Life Insurance! Starting hourly rate of $16.04. The Porter will work under the supervision of the Maintenance Supervisor assisting in the maintenance of a privatized student housing facility. The facility may include all or some of the following components: offices, resident rooms, laundry facilities, swimming pool, study lounges, parking areas, gym and/or an activity center/community room/clubhouse. Maintenance Activities • Assists in performing daily tasks which will maintain the curb appeal of the facility., • Daily pick-up of exterior community grounds., • Daily trash removal as directed., • Housekeeping duties in all areas, as directed, which will include dusting, vacuuming, washing windows, cleaning and replacing lights as needed, mopping, etc., • Periodically will be requested to complete specific tasks as directed by Management such as waxing or buffing tile floors, spot cleaning furniture and carpets, etc., • During performance of duties, notes and reports items to Management requiring repair or any suspicious or unlawful items around the facility (for example, firearms, lounge furniture in resident’s unit, etc.)., • Other duties as assigned. Technical Skills • Completes assigned task with minimal supervision., • Communicates effectively and tactfully with co-workers and residents of the facility with a positive attitude and strong customer service orientation. Experience • Minimum of two (2) years previous experience as a maid/ porter in in multi-family or privatized student housing, preferred, not required. Qualifications • High School diploma or equivalent.

Job Description As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Cashier Supervisor , you will exude all the qualities that K1 embraces: positivity, cheerfulness, and exceptional customer service. Is this you? Duties and Responsibilities • Ensure that each guest receives outstanding service by providing a guest friendly environment which includes greeting and acknowledging every guest and maintaining outstanding standards., • Assures the completion of all POS transactions and the proper control of all cash and media at the POS registers according to Company policies and procedures., • Responsible for assisting in training of new cashiers, • Ensures compliance of Company policies, procedures and practices; and supports Company loss prevention efforts., • Oversees the productivity, breaks and daily scheduling of all cashiers and communicates performance issues to management., • Provides orderly maintenance of front-end supplies, • Must be at least 18 years of age, • 2+ years cashier experience, • Provide proof of identity and eligibility to work in the United States, • Must have reliable transportation, • Medical, dental and vision benefits. Experience: • Supervisor: 1 year (Preferred), • Cashiering: 2 years (Preferred) Education: • High school or equivalent (Required) Additional Compensation: • Tips, • Commission Benefits: • Health insurance, • Dental insurance, • Vision insurance, • Retirement plan, • Paid time off

Job DescriptionBenefits: • Flexible schedule, • Health insurance, • Opportunity for advancement, • Profit sharing, • Provide excellent customer service to members/guests, • Welcome and greet members/guests upon arrival, • Answer phones, book appointments, sell memberships, gift cards and upgrades, • Follow proper filing procedures/file maintenance, • Promote health/wellness benefits of massage therapy and skin care, • Maintain a professional and clean work environment & appearance, • Positive, energetic attitude, • Builder of Relationships, • Team player, • Perform various other duties as assignedWhats in it for you?, • Hourly wage plus commissions and bonuses, • Flexible schedules, • Professional and safe work environment, • Employee discounts, • Employee rewards program/employee referral bonus, • ContestsJob Requirements:, • Excellent personal appearance, good verbal and written communication skills., • Ability to handle stressful situations professionally and multitask with ease all while focusing on the guest, • A strong team player with ability to work independently with minimal supervision, • Knowledge of retail, point of sales systems and/or appointment booking computer systems, a plusIf youre looking for a supportive spa where you can grow your career - Come join our family!

Hunter Douglas is the world’s leading manufacturer of window coverings and a major manufacturer of architectural products. We are a brand that you know and trust. With more than 100 years of innovation, we’ve defined our industry with proprietary products that deliver revolutionary style and functionality and can be found in millions of homes and commercial buildings globally. \n As a member of the Hunter Douglas family of brands, Universal Screen manufactures the finest retractable shading solutions on the market. We use only the highest grade materials in the construction of each outdoor retractable shade. We firmly believe in providing our customers not only superior quality motorized shades, but also a seamless experience that surpasses their expectations. \n We are searching for candidates that are driven, intelligent, creative, and entrepreneurial. By offering challenging and accelerated opportunities for growth, powered by a shared hunger for success, we create a space for your career to thrive. In return for your expertise, we are committed to providing competitive and robust total compensation and benefit packages to ensure you feel valued. Our dream is to become the fastest growing, most loved, window covering company in the world. What’s yours? \n \n Position Overview \n The Delivery Driver is responsible for transporting product to customer locations within a 250-mile radius of the Richardson, TX facility. This position requires compliance with all applicable DOT regulations, as well as state, federal, and local transportation laws. The role involves physical assistance with unloading as needed, maintaining vehicle documentation, and coordinating routes with the Logistics Coordinator. \n What you'll do \n\n • Operation of commercial 40ft Gooseneck Trailers via new model Dodge Ram 3500 Trucks\n, • Communication with Company Dealers prior to delivery time and updating delivery times during route\n, • Navigation throughout the assigned Delivery Zone\n, • Optimizing Delivery BOL and Stop schedule based on experience\n, • Heavy lifting of product at times 60lbs+, helping dealers to unload shipments\n, • Being away from home on average, 4 nights per week (Hotel stay paid by Universal Screens, no sleeping in trucks)\n, • Vehicle documentation and coordination with maintenance provider to keep vehicles operational\n, • High school diploma or GED preferred.\n, • Must possess a valid Commercial Driver’s License (CDL).\n, • Valid Driver’s License\n, • Clean Driving Record\n, • 3 Year Driving Record\n, • Gooseneck Trailer Experience\n, • Background And Drug Test\n, • Ability to lift 60lbs+\n, • Annual base salary range: $25/hr hourly.\n, • Generous benefits package including medical, dental, vision, life, disability\n, • A company culture that prioritizes internal development and professional growth\n, • Time off with pay\n, • 401(k) plan with a degree of employer matching\n, • Paid parental leave\n #LI-RT1 \n #LI-office By submitting your application below, you are providing your prior consent to receive SMS messages to notify you of any updates to your application status and to engage in discussion throughout your application process. You can cancel the SMS service at any time. Just text “STOP” to any of our texts to unsubscribe. Message & data rates may apply. Message frequency may vary. If you have any questions regarding privacy, please read our privacy policy, or terms of use

Operating Room Shift – Evening shift 1430-2300 Number of Beds: 11 BSWMCI performs all types of surgical cases including Robotic, General, Podiatry, Colorectal, GYN, Cardiothoracic, Orthopedic, Endovascular, and Urology on high acuity patients. We have a total of 11 OR suites which include 2 Hybrid ORs. We are expanding our surgical footprint to add five additional surgical suites. Our OR leadership team fosters an environment that supports learning, mentoring, and building every team member. Surgical Services Patient Population: Outpatients, Inpatients that include: ICU/CCU Ventilators, Central Line/Aline Management, Critical Drips, PCU/Tele/Med-Surg Patient Ratios: OR-1 DSU-5 PACU-2 Department Specifics: Family and teamwork oriented. Patient/Staff safety is our top priority. Active Unit Based Council About Us Here at Baylor Scott & White Health we promote the well-being of all individuals, families, and communities. Baylor Scott and White is the largest not-for-profit healthcare system in Texas that empowers you to live well. Our Core Values are: • We serve faithfully by doing what's right with a joyful heart., • We never settle by constantly striving for better., • We are in it together by supporting one another and those we serve. Our benefits are designed to help you live well no matter where you are on your journey. For full details on coverage and eligibility, visit the Baylor Scott & White Benefits Hub to explore our offerings, which may include: • Eligibility on day 1 for all benefits, • Dollar-for-dollar 401(k) match, up to 5%, • Debt-free tuition assistance, offering access to many no-cost and low-cost degrees, certificates and more Note: Benefits may vary based on position type and/or level Job Summary SHIFT: FT/DAY 3-12 HOUR SHIFTS PER WEEK The Certified Surgical Technologist works during surgery to speed up procedures, under a Registered Nurse's supervision. This position helps the surgical team by using equipment and tools to ensure a safe operating room and that equipment is available and working properly. Essential Functions of the Role • Discuss any special needs with the surgeon before surgery. Scrub into surgery in time to prepare instruments before the surgeon scrubs in., • Prepares the operative site by aseptically cleaning and patient clipping, as needed., • Prepare and maintain the instrument table in an organized way. This avoids damage and incorrect instrument counts., • Identify damaged or incomplete trays. Rectify discrepancies immediately or contact those who can help to avoid delays or injury., • Sets up the operating room based on surgical procedure schedules. Arranges sterile setup of instrument table supplies and equipment for the specific procedure. Carefully selects and opens only needed supplies., • Ensures the proper functioning of surgical instruments, equipment, and supplies during surgical procedures., • Performs surgical counts of sponges, sharps, instruments, and miscellaneous items, according to established policies and procedures., • Anticipates the needs of the surgeon and surgical team staff. Passes sterile supplies and equipment to surgeons and assistants. Holds retractor devices and responds to the surgical team's needs during surgery., • Assists the surgical team with draping and positioning the patient., • Receive surgical specimens following protocol. Pass the specimens off the sterile field to the circulating nurse, verifying the source., • Assists with placement of surgical dressings to operative site following surgical case completion., • Disassembles surgical instruments at the end of the procedure. Recycles as needed. Disposes of sharps, fluids, and waste properly., • Prepares soiled instrumentation for proper transportation to decontamination area., • Ensures the cleaning, decontamination, sterilization, maintenance, and preparation of surgical instruments, equipment, and supplies for distribution., • Cleans the operating room following each case, and returns equipment to appropriate storage areas., • Follows infection control policies, AORN Guidelines, OSHA guidelines, and other regulations to ensure a safe work environment for self, coworkers, and patients., • Ensures proper orientation and knowledge of all equipment and instrumentation prior to patient use., • Knowledge of infection prevention and regulatory sterilization standards., • Knowledge of the theory and application of sterile and aseptic technique., • Knowledge of human anatomy, surgical procedures and implementation tools and technologies to assist surgeons with invasive therapeutic and diagnostic procedures., • Good verbal and written communication skills and interpersonal skills to interact with surgical and central sterile processing team members., • Occasional exposure to chemical and radiation hazards., • Successful completion of:, • A Commission on Accreditation of Allied Health Education Programs (CAAHEP) accredited or other nationally accredited surgical technologist program. Additionally, holds and maintains certification as a (CST) surgical technologist by the National Board of Surgical Technology and Surgical Assisting (NBSTSA) or the National Center for Proficiency Testing or their successor., • Complete a formal surgical technology training program in the U.S. military or Public Health Service Commissioner. We believe that all people should feel welcomed, valued and supported, and that our workforce should be reflective of the communities we serve. QUALIFICATIONS • EDUCATION - Grad of an Accredited Program, • Basic Life Support (BLS): BLS or BLS within 30 days of hire or transfer., • Cert Surgical Technologist (CST): CST from NBSTSA or NCCT. Completion of formal training in ST from Military/Public Health Service. Employed in ST role in a Healthcare facility before 9/1/2009., • If one of the above is not held GAP and CST ARE required.

Job Description Position Description: The Porter position will ensure that all community property grounds are clean on a daily basis. Primary Duties/Responsibilities • Remove litter and debris daily from all areas of the property (areas include: pool area, laundry rooms, dumpster area, recreation areas, general grounds, and walkways to, from and in between buildings), • Trash out vacated apartments (remove abandoned furniture, trash, boxes, etc.), • Assist with various physical tasks (.e. tearing down fences, digging trenches, etc.), • Assist with make-readies, • Assist in the cleaning and maintenance of storage rooms, • Distribute resident communications, • Maintain awareness of utility meter cut-offs, sewer clean-outs, and safety precautions, • Repair and adjust sprinklers Minimum Requirements • High school diploma/ equivalent OR 1 year of practical experience with demonstration of required skills, • To work at other Foundation Communities properties in the Austin area as needed, • Ability to understand English An occupational exposure to blood or other potentially infectious materials can be expected. May be asked to clean up bodily fluids with appropriate training and personal protective equipment provided. Physical Requirements CONSTANTLY: standing/walking, bending/stooping/squatting, pushing/pulling, grasping/gripping, reaching above the shoulder, climbing, lifting between 0 and 25 pounds. FREQUENTLY: coordination of hand/eye/foot, finger dexterity, lifting between 26 and 50 pounds. May be required to provide coverage/help at other supportive housing communities as needed. Compensation $ 17.00 /hour This position profile identifies the key responsibilities and expectations for performance. It cannot encompass all specific job tasks that an employee may be required to perform. Employees are required to follow any other job-related instructions and perform job-related duties as may be reasonably assigned by his/her supervisor. Foundation Communities provides an excellent benefits package including employer paid health benefits, 401(k) investment opportunity, Employee Assistance Program, paid vacation, holiday, and sick time. In compliance with Foundation Communities’ duty to provide and maintain a workplace that is free of known hazards, Foundation Communities is requiring all employees to be fully vaccinated against COVID-19 unless they request and receive a reasonable accommodation. Foundation Communities is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation & gender identity.

Job Description The Role: As a Pipefitter, you will work under minimal supervision with a high level of independent judgement and problem solving. You should be flexible enough to take on and tackle multiple job assignments in a shift. Preferred Experience Includes: \n • Experience with planned maintenance systems and predictive technologies\n, • Experience with industrial robotics, automation, and conveyance systems\n\n Primary Responsibilities: \n • Follow established safety procedures according to OSHA standards and company procedures\n, • Maintain, dismantle, repair, and replace mechanical and hydraulic components (e. g. bearings, seals, details, carriers, etc.) on industrial machinery such as shafting, motors, generators, air compressors, engines, pumps, cylinders, gears, couplings, linkages, ball screws, high speed CNC spindles, coolant systems and filters, and combustion equipment and valves\n, • Layout, assemble, fabricate, maintain, and repair piping systems\n, • Use various hand or power tools for measuring, cutting, threading, grooving, bending, soldering, assembling, joining, and installing pipes, valves, and fittings\n, • Read and interpret blueprints for the mechanical operation and assembly of conveyor systems, material handling systems, robots, and other automation\n, • Operate mobile equipment (e.g. forklifts, vertical lifts, cranes)\n, • Determine loading requirements to rig equipment and material for lifting\n, • Set up and operate conventional or computer numerically controlled (CNC) machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes\n, • Fabricate punches, tools, steel rule tools and t-sets to exact specifications\n, • Plan sequences of operations for fabricating tools or assemblies using blueprints, sketches, or models\n, • At least six (6) years of related experience in a Mechanical trade (millwright, pipefitter, toolmaker, machine repair) or a U.S. Department of Labor Certificate of Completion in a Mechanical trade (millwright, pipefitter, toolmaker, machine repair). \n, • Must be able to satisfactorily complete the General Motors hiring process requirements which includes comprehensive assessments, drug testing, and a background check\n, • At least 18 years of age \n, • Eligible to work in the United States \n, • Must be willing to work flexible shift hours and day, afternoon, or night shifts as well as overtime hours daily, weekend and holidays on those shifts with little notice \n, • GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU NEED OR WILL NEED GM IMMIGRATION SPONSORSHIP TO WORK OR TO REMAIN EMPLOYED AT GM (e.g., H-1B, TN, STEM OPT, etc.). \n, • \nIf you are a current GM employee operating under a collective bargaining agreement, please contact your local HR/LR for employee placement opportunities.\n, • This position may be filled with a Journeyperson or Journeyperson In Training, the compensation ranges for a JIT include ($36.68-$42.80) or Journeyperson rate of $43.67. Certificates/credentials and scoring in interview will determine your status and pay.\n\n General Motors UAW hourly employment offers a very competitive compensation and benefit package. An annual incentive payout is also available, as qualified. Relocation and travel expenses will be the responsibility of the applicant. Please note - per the labor agreement between GM and the UAW, GM may share information and documentation relating to the credentials of applicants for this position (e.g., resumes, journeyperson cards, interview notes, certificates, etc.) with UAW personnel who have a need to know as part of their role on the UAW skilled trades team. About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards Resources. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, emailus or call us at 800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Oil States is looking for candidates for the position of Quality Manager. This position is on-site full time and located in Arlington, TX. POSITION SUMMARY: Responsible for the development, implementation, maintenance, performance and management of the Quality Management System to ensure compliance with all external requirements including ISO 9001 and any other customer specific requirements through the adoption of quality and lean tools to increase the departmental effectiveness and efficiency. Reports to the General Manager but collaborates closely with the Core Process Owners and team members. Indirectly reports to OSI Director, Quality Assurance ESSENTIAL DUTIES AND RESPONSIBILITIES: \n • Lead and manage the quality team by guiding, developing, coaching, counseling, disciplining on a consistent basis by initiating, coordinating, and enforcing company policies and procedures.\n, • Lead efforts when hiring employees related to quality functions, ensuring position requirements and competency requirements are met.\n, • Ensure required training for Quality personnel is established, performed, documented, and maintained.\n, • Ensure quality processes are developed, managed, and maintained.\n, • Interpret codes, standards, customer requirements as needed.\n, • Interface with customers, suppliers, and auditors as required.\n, • Attend project kickoff and or pre job meetings as required.\n, • Ensure all required Quality documentation is established, managed, and maintained, including but not limited to: Quality Manuals, Work Procedures, Process Maps, Work Instructions, Forms, Etc.\n, • Schedule and facilitate all internal, external, customer, supplier, and registrar audits, ensuring each is performed per the relevant requirements.\n, • Coordinate with all departments to assist with the assurance of customer satisfaction internally and externally, as it relates to processes, services, and products provided to drive improvement activity that will promote the long-term interest of the business.\n, • Interpret changes to industry standards and communicate these changes to the organization as appropriate.\n, • Coordinate with Purchasing as required when qualifying and or performing audits to qualify, maintain, and manage suppliers.\n, • Ensure that Goals, Objectives, and Key Performance Indicators/Process Measures are established and are all measurable.\n, • Track and report the facilities top level goals and objectives, ensuring appropriate measures are communicated with the organization as appropriate.\n, • Insure that all NCRs, CARs, and PARs are effectively resolved and in a timely manner.\n, • Facilitate Quality Management Reviews and ensure each is performed in accordance to the requirements of the applicable standards.\n, • Responsible for the development and managing departmental budgets and cost/spending.\n, • Work with all Contract Development/Sales groups during the bid phase to ensure compliance to all Quality related customer specifications.\n, • Ensure that all personnel have access to the latest revisions and or editions of Codes, Standards, and documents that could affect the quality of our products and or services.\n, • Participate, lead, and or assist in developing Root Cause Analysis teams as required. Improve business performance by identifying key areas for business improvement, lead and sponsor improvement projects ensuring that the department has an active continuous improvement plan to improve performance.\n, • Assist in developing risk assessments, along with risk mitigation and contingency plans.\n, • Manage and maintain metrological instrument calibration function, including the inspection, repair and re-calibration of the instruments, as well as maintenance of the instrument calibration records. Ensure that any gages found out of tolerance when calibrated are evaluated for the effect on the product accepted.\n, • Maintains a safe and healthy work environment by implementing, maintaining, and aligning company policies that adhere to local, state and federal environmental, health and safety regulations.\n, • Promote a team atmosphere.\n, • Perform accurate and precise employee evaluations/appraisals.\n, • Willing to travel as required.\n, • Other assigned duties and responsibilities as required.\n\n QUALIFICATION REQUIREMENTS: \n • Bachelor's degree or 5 to 8 years' combination of education and experience in Quality Management or related field.\n, • 5 years supervisory/managing experience of Quality Assurance personnel preferred.\n, • Familiar with requirements of ISO 9001 and industry standards related to manufacturing in the oil and gas industry.\n, • Background in molded products, welding, coating, machining, and NDE processes a plus.\n, • Auditor qualifications.\n, • Familiar with Continuous Quality Improvement (CQI) techniques.\n, • Knowledge/skills to lead Root Cause Analysis (RCA) teams.\n, • Ability to positively motivate individuals and teams to meet or exceed project expectations.\n, • Strong planning, organizational, analytical and communication skills.\n, • Intermediate computer skills, Word, Excel, Power Point, etc.\n\n SPECIFIC KNOWLEDGE/SKILLS: \n • Problem Solving - Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; develops alternative solutions; works well in group problem solving situations; uses reason even when dealing with emotional topics.\n, • Technical Skills - Assesses own strengths and weaknesses; pursues training and development opportunities; strives to continuously build knowledge and skills; shares expertise with others.\n, • Interpersonal Skills - Focuses on solving conflict rather than blaming others; maintains confidentiality; listens to others without interrupting; keeps emotions under control; remains open to others' ideas and tries new things.\n, • Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; responds well to questions; demonstrates group presentation skills; participates in meetings.\n, • Written Communication - Writes clearly and informatively; edits work for spelling and grammar; varies writing style to meet needs; presents numerical data effectively; able to read and interpret written information.\n, • Cost Consciousness - Works within approved project and departmental budgets; develops and implements cost saving measures; contributes to profits and revenue; conserves organizational resources.\n, • Ethics - Treats people with respect; keeps commitments; inspires the trust of others; works with integrity and ethically; upholds organizational values.\n, • Organizational Support - Follows policies and procedures; completes administrative tasks correctly and on time; supports organization's goals and values; benefits organization through outside activities; supports affirmative action and respects diversity.\n, • Planning/Organizing - Prioritizes and plans work activities; uses time efficiently; plans for additional resources; sets goals and objectives; organizes or schedules other people and their tasks; develops realistic action plans.\n, • Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality.\n, • Attendance/Punctuality - Is consistently at work and on time; ensures work responsibilities are covered when absent; arrives at meetings and appointments on time.\n, • Dependability - Follows instructions and responds to management direction; takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan.\n, • Initiative - Volunteers readily; undertakes self-development activities; seeks increased responsibilities; takes independent actions and calculated risks; looks for and takes advantage of opportunities; asks for and offers help when needed.\n\n PHYSICAL REQUIREMENTS: \n • Prolong sitting.\n, • Some moderate lifting.\n, • Walking, standing, reaching and bending may be required.\n\n CITIZENSHIP REQUIREMENTS - By contractual requirements, the project and job location for this position requires that all persons establish proof of US Citizenship. Dual Citizenship (US citizenship and citizenship of some other country) cannot be accepted. You will be required to provide original or certified copies of documents establishing your citizenship prior to consideration for this position. Be part of what's next at Oil States Industries, Inc.! Over 80 years in business An Equal Opportunity Employer An E-Verify Employer Un empleador de E-Verify Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at [email protected] \n • Notice: Know Your Rights: Workplace Discrimination is Illegal\n, • Notice: Pay Transparency Nondiscrimination (English)\n, • Aviso: Transparencia en el Pago No Discriminacion (Spanish)\n\n Job Description: Airbus Helicopters is looking for a Quality Inspector A (NDT) to join our Quality Assurance Team in Grand Prairie, TX. The Quality Inspector A (NDT) uses NDT methods to inspect and/or certify compliance of materials, parts, products, components, assemblies or sub-assemblies and who must be qualified or certified in the following fields of activity: Magnetic Particle (MT), Fluorescent Penetrant (PT), Eddie Current (ET), Ultrasonic (UT). Meet the team: From building to servicing the next generation of aerospace, our team focuses on quality, productivity and efficiency. We ensure the highest quality of care and safety is built into each aircraft we assemble and maintain. Our team members make it happen. Your working environment: A suburb just outside the Dallas-Fort Worth metropolitan area is home to Airbus Helicopters U.S. regional headquarters, where we have more than 1,000 employees. Check out one of the seven professional sports teams that also call Dallas home - you may even see a special, custom Airbus helicopter dedicated to the Dallas Cowboys flying during home games. How we care for you: How we care for you: \n • \nFinancial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP")\n, • \nWork/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program.\n, • \nHealth & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages.\n Your challenges: Part Processing: 40% \n • Application of the various NDT methods allowing inspection and/or certification of the parts health concerning cracks.\n, • Understand and implement the work instructions in the method for which he/she is qualified according to approved written instructions (Inspection Document (DI), technical sheet (FT), Work Card (CT), Inspection process sheet, etc.).\n, • Treat the parts, document the results \n, • Carry out any preparation necessary of the parts before or after test according to work instructions \n, • Carry out interpretations and evaluations of specific product or product type for acceptance or rejection, while following an approved instruction. \n, • Ensure areas to be inspected, the position of check phases and associated documents for the preparation of instruction files (DI), Technical Sheets (FT) and/or Work Cards (CT). \n\n Calibration/ Qualification of the room and equipment: 30% \n • Maintain and calibrate NDT equipment\n, • Carry out the adjustment of the equipment items according to written instructions \n, • Collection of reference specimens\n, • Perform concentration checks\n, • Perform contamination checks\n, • Calibrate lamp illumination levels\n\n Count & Surface Preparation of Parts: 20% \n • Validate inclusion of all parts required to be processed\n, • Degrease all parts by detergent wash and Ultrasonic\n, • Water rinse all parts with Ultrasonic\n\n Documentation: 10% \n • Complete maintenance records\n, • Certify pass/fail for inspection of all parts\n, • Update SAP labor tracking \n\n Additional Responsibilities: \n • Standardize technical methods used and document with written procedures and/or NDT work instructions\n Education: Required: • Associate Degree in aviation or industry related.\n, • National Aeronautical Standard (NAS) 410 level II certification course completion\n\n Experience: Required: • Actively engaged in three or more NDT methods for five years as a NAS 410 certified level II\n Licensure/Certifications: Required: • A&P license in addition to required licenses/certifications\n, • American Society of Non-destructive Testing (ASNT) and National Aerospace Standard (NAS 410) Level III NDT certification or equivalent certification from other countries' corresponding agencies\n\n Knowledge, Skills, Demonstrated Competence: Required: \n • Be qualified to direct and perform inspections in the method required.\n, • Ability to demonstrate to the satisfaction of the Level III that they are familiar with and can perform the applicable examinations using suitable calibration blocks and written procedures prepared for examination of articles within the first 90 days.\n, • Be thoroughly familiar with the scope and limitations of the method.\n, • Have the ability to apply detailed techniques to products or parts within the limitations of the qualifications requirements.\n, • Be able to organize and report NDT results in a manner specified by the employing organization.\n, • Ability to read and understand technical and regulatory documentation.\n, • They must know the applications and limitations of the various NDT methods used to locate defects in aircraft structure and components.\n\n Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages): Required: • Must be able to read, write, speak and understand the English language effectively with all levels of personnel.\n Technical Systems Proficiency: Required: • Competent user of Microsoft SharePoint, ORION, TIPI, SAP\n Travel Required: • 5% Domestic and International\n Citizenship: • Authorized to Work in the US\n Clearance: • None\n Decision Making, Complexity: Must routinely judge the airworthiness of the component inspected for serviceability and safety to continue in service operation. Includes but is not limited to decisions resulting in loss of revenue, property or life. A high degree of independent decision making and integrity is required. Organizational information: This position will be managed by the Supervisor of Quality Assurance. Direct Reports :Exempt : 0 Non-exempt : 0 Job Dimensions, Contributions to Success: \n • Correctly identify internal and external customers and understand their requirements\n, • Maintain commitments on time/cost/quality\n, • Do not compromise safety or quality\n, • View problems as opportunities for improvement\n, • Constantly focus on improving processes, products and services.\n\n Nature of Contacts: Involved Communication on a daily Basis with internal and external parties Physical Requirements: \n • \nOnsite: 95%\n, • \nVision: \n, • Able to pass an examination to ensure near vision of at least one eye, either corrected or uncorrected, such that the individual can read Snellen equivalent of 20/25 (Jaeger #1). The examination must be on a periodic basis, not to exceed 1 year.\n, • Able to distinguish and differentiate between colors necessary for the inspection method for which qualification is sought. Color vision testing need only be accomplished one time, usually at the initial vision examination.\n, • Able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings (daily)\n\n\n, • \nHearing: able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms. (daily)\n, • \nSpeaking: able to speak in conversations and meetings, deliver information and participate in communications. 10% of each day\n, • \nEquipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. Consistently throughout the day\n, • \nCarrying: Consistently throughout the day\n, • \nLifting: able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Consistently throughout the day\n, • \nPushing / Pulling: able to push and pull small office furniture and some equipment and tools. Consistently throughout the day\n, • \nSitting: able to sit for long periods of time in meetings, working on computer.10% of each day\n, • \nSquatting / Kneeling: able to squat or kneel to retrieve or replace items stored on low shelving. Consistently throughout the day\n, • \nStanding: able to stand for discussions in offices or on production floor. Consistently throughout the day\n, • \nTravel: able to travel independently and at short notice. Between shops as required.\n, • \nWalking (include routine walking such as to a shared printer to retrieve documents): able to walk through office and production areas including uneven surfaces. Consistently throughout the day\n, • \nPersonal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by task consistently throughout the day.\n A full job description will be provided to candidates whom progress to interview stage or any candidate upon request. Equal Opportunity: All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status As a leader in our field, Airbus Helicopters, Inc. provides relocation assistance for qualified positions and a comprehensive compensation and benefits package. As a matter of policy, Airbus Helicopters, Inc. does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus Helicopters, Inc. does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. NOTE: Airbus Helicopters, Inc. reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written guarantee of employment. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Helicopters, Inc. Employment Type: Permanent Experience Level: Professional Remote Type: On-site Job Family: Quality Inspection Job Posting End Date: 09.12.2025 Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position descrip...

Job Description We are looking to hire general cleaning staff to do building maintenance, vacuuming, mopping, sweeping floors, trash removal, rest room and break room cleaning experience. • Professional attitude & appearance., • Self-motivated, hardworking, dependable and responsible., • Janitorial experience a plus but will train the right person., • Full-Time, • Pay rates starting $13.00/hr, • Hours - Day Shift 5:00am - 1:30pm or Night 2:00pm- 10:00pm, • Health Benefits Package, • Ancillary benefits—Life insurance, Long Term Disability, FSA and Dependent Spending care, • 401K, • Opportunity for growth Estamos buscando personal de limpieza con experiencia en limpieza de baños y salas de descanso. para limpieza general incluyendo aspirar and colectar basura • Actitud y apariencia profesional., • Automotivado, trabajador, confiable y responsable., • La experiencia de limpieza es una ventaja, pero capacitará a la persona adecuada., • Tiempo completo, • Salario comenzando a $13.00/hr, • Horario de trabajo 5:00am - 1:30pm or 2:00pm- 10:00pm, • Paquete de beneficios de salud, • Beneficios complementarios: seguro de vida, discapacidad a largo plazo, FSA y atención de gastos de dependientes, • 401K Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability, or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law. #LI-DNI

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Mechanic , you will service and maintain our fleet of state-of-the-art, high performance, high speed electric go karts. The right candidate will have a track record of mechanical repair experience, preferably in the golf kart, go kart, motorcycle, or motorsports field, and will be self-motivated and be able to work in a fast-paced environment. Is this you? Duties and Responsibilities • Perform opening track and kart repairs and performance checks, • Maintain kart performance throughout the day, • Maintain track and facility appearance and functionality, • Keep accurate documentation of repairs, parts inventory, and special projects, • Responsibly maintain supply of tools and machinery, • Respond to emergency situations as they arise, • Ensure that the pit, kart shop and track areas remain clean and safe, • Assist the track crew with track operations in limited situations, • Perform specific facility cleaning and maintenance duties as assigned by management, • Perform closing duties to secure the pit and track and prepare for the following day's operation, • Must be at least 18 years of age, • High school diploma or general education degree (GED); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience., • A Drug Test and Background Check is required prior to employment, • Provide proof of identity and eligibility to work in the United States, • Standing over 2/3 of time, • Walking over 2/3 of time, • Lifting is required

Description candidate must be located in or close proximity to Dallas A security technician installs, maintains, tests, and repairs physical and digital security systems, including access control, video surveillance (CCTV), intrusion detection, and computer network security tools. Key responsibilities involve reading blueprints, wiring low-voltage circuits, troubleshooting system malfunctions, performing preventive maintenance, providing user support, and managing documentation and parts inventory. The role requires strong technical skills, the ability to interpret technical manuals, a valid driver's license, and often involves physical work and adherence to safety protocols. Install, test, troubleshoot, repair, and maintain all Security systems at customer sites. Installation will include, but not limited to: Video Surveillance systems, IP and Analog cameras, wireless, Access Control panels, Intrusion Panels, magnetic locks, card readers, motion sensors, door contacts, electric door strikes, etc. Perform assigned projects within scope, in a timely manner, and on budget. Provide customers with system operation and training. Excellent attention to detail including maintaining concise daily records and following of operational standards and practices. Coordinate with Project Management and Field Technicians for project scheduling. Skills access control, installation, alarm installation Top Skills Details access control,installation,alarm installation Additional Skills & Qualifications Must have PPE before starting: Hard hat with chin strips ($20-$200 which they don't have to have an expensive one), safety glasses, steel toed shoes, vest, In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. While performing the duties of this job, the employee is regularly required to stand, climb, walk, sit, push, pull, squat, crawl, and stoop. The employee is regularly required to use hands to finger, handle, feel objects, and type on keyboard; reach with hands and arms; talk and hear. Specific vision abilities required by the job include close vision, distance vision, depth perception, and the ability to adjust focus. The use of power tools will be required to effectively perform this position. The employee must occasionally lift and/or move up to 50 pounds Experience Level Intermediate Level Pay and Benefits The pay range for this position is $25.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Arlington,TX. Application Deadline This position is anticipated to close on Sep 18, 2025. h4>About TEKsystems:\n\n We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. \n\n The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. \n\nAbout TEKsystems and TEKsystems Global Services \n\n We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. \n\n The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Baylor Medical Center- Irving Unit: Labor and Delivery Shift: Day Schedule: Part Time (2- 12 hour shifts) Experience: 2 years preferred or 1 year L&D No on-call requirements About Us Here at Baylor Scott & White Health we promote the well-being of all individuals, families, and communities. Baylor Scott and White is the largest not-for-profit healthcare system in Texas that empowers you to live well. Our Core Values are: • We serve faithfully by doing what's right with a joyful heart., • We never settle by constantly striving for better., • We are in it together by supporting one another and those we serve. Our benefits are designed to help you live well no matter where you are on your journey. For full details on coverage and eligibility, visit the Baylor Scott & White Benefits Hub to explore our offerings, which may include: • Eligibility on day 1 for all benefits, • Dollar-for-dollar 401(k) match, up to 5%, • Debt-free tuition assistance, offering access to many no-cost and low-cost degrees, certificates and more Note: Benefits may vary based on position type and/or level Job Summary The Surgical Technologist 2 works during surgery to speed up procedures, under a Registered Nurse's supervision. This position helps the surgical team by using equipment and tools to ensure a safe operating room and that equipment is available and working properly. Essential Functions of the Role • Discuss any special needs with the surgeon before surgery. Scrub into surgery in time to prepare instruments before the surgeon scrubs in., • Prepares the operative site by aseptically cleaning and patient clipping, as needed., • Prepare and maintain the instrument table in an organized way. This avoids damage and incorrect instrument counts., • Identify damaged or incomplete trays. Rectify discrepancies immediately or contact those who can help to avoid delays or injury., • Sets up the operating room based on surgical procedure schedules. Arranges sterile setup of instrument table supplies and equipment for the specific procedure. Carefully selects and opens only needed supplies., • Ensures the proper functioning of surgical instruments, equipment, and supplies during surgical procedures., • Performs surgical counts of sponges, sharps, instruments, and miscellaneous items, according to established policies and procedures., • Anticipates the needs of the surgeon and surgical team staff. Passes sterile supplies and equipment to surgeons and assistants. Holds retractor devices and responds to the surgical team's needs during surgery., • Assists the surgical team with draping and positioning the patient., • Receive surgical specimens following protocol. Pass the specimens off the sterile field to the circulating nurse, verifying the source., • Assists with placement of surgical dressings to operative site following surgical case completion., • Disassembles surgical instruments at the end of the procedure. Recycles as needed. Disposes of sharps, fluids, and waste properly., • Prepares soiled instrumentation for proper transportation to decontamination area., • Ensures the cleaning, decontamination, sterilization, maintenance, and preparation of surgical instruments, equipment, and supplies for distribution., • Cleans the operating room following each case, and returns equipment to appropriate storage areas., • Follows infection control policies, AORN Guidelines, OSHA guidelines, and other regulations to ensure a safe work environment for self, coworkers, and patients., • Ensures proper orientation and knowledge of all equipment and instrumentation prior to patient use., • Knowledge of infection prevention and regulatory sterilization standards., • Knowledge of the theory and application of sterile and aseptic technique., • Knowledge of human anatomy, surgical procedures and implementation tools and technologies to assist surgeons with invasive therapeutic and diagnostic procedures., • Good verbal and written communication skills and interpersonal skills to interact with surgical and central sterile processing team members., • Occasional exposure to chemical and radiation hazards., • Successful completion of:, • A Commission on Accreditation of Allied Health Education Programs (CAAHEP) accredited or other nationally accredited surgical technologist program. Additionally, holds and maintains certification as a (CST) surgical technologist by the National Board of Surgical Technology and Surgical Assisting (NBSTSA) or the National Center for Proficiency Testing or their successor., • Complete a formal surgical technology training program in the U.S. military or Public Health Service Commissioner. We believe that all people should feel welcomed, valued and supported, and that our workforce should be reflective of the communities we serve. QUALIFICATIONS • EDUCATION - Grad of an Accredited Program, • EXPERIENCE - Less than 1 Year of Experience, • CERTIFICATION/LICENSE/REGISTRATION, • Basic Life Support (BLS): BLS or BLS within 30 days of hire or transfer., • Cert Surgical Technologist (CST): If candidate completed military/Public Health Service ST training or worked as an ST before 9/1/2009 → HS/GED is sufficient. Otherwise, candidate must have both GAP (accredited ST program) and current CST (NBSTSA or NCCT).

Job Description Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping and snow removal, we enable desired outcomes for our clients through consistent service and outstanding people. We are seeking to hire a Day Porter/General Cleaner. You will be responsible for performing vacuuming, mopping, sweeping floors, trash removal rest room and break room cleaning and other miscellaneous duties to ensure that building and facilities are maintained in a healthy, safe and sanitary manner. Ideal candidate will have professional attitude & appearance and is self-motivated, hardworking, dependable, and responsible. Job Requirements • Must be able to follow instructions from supervisor and complete all tasks effectively., • Prior cleaning experience is a plus., • Must be able to lift at least 50 pounds., • Janitor experience a plus but will train., • Full-Time/Part-time, • Pay rate $ 13.25, • Hours 8am - 5pm, • Health Benefits Package, • Ancillary benefits—Life insurance, Long Term Disability, FSA and Dependent Spending care, • 401K, • Opportunity for growth Pritchard Industries participates in E-Verify EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability, or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law. #LI-DNI

Job Description We have a fantastic Porter opportunity available! Weinstein Properties, headquartered in Richmond, Virginia owns and manages over 60 apartment communities in Virginia, North Carolina, Texas, Tennessee, and Georgia. Still owned and operated by the Weinstein family after 70+ years, our continued success is attributed to our hands on approach to daily operations and our focus on the customer experience. Location: Grand Prairie, TX Pay: Hourly rates are competitive (starting at $16/hour) + Quarterly Bonuses Bonus*: Currently eligible for a $1000 stay on bonus after 90 days and in good standing. (*For the stay on bonus - the recruiter can discuss the details. Stay with us and be awesome and you get this great bonus!) Schedule: Monday - Friday, 8am - 5pm Who should apply? This role is ideal for someone who is reliable, detail-oriented, self-motivated, and takes pride in their work. Porters are essential members of our team, keeping our communities clean, beautiful, and welcoming. At Weinstein Properties, we do things differently. We invest in people, not just resumes. We believe in training talent from the ground up. Ideal Characteristics of Successful Porters • Reliability & Punctuality: Shows up on time, dependable, and trustworthy., • Independence & Initiative: Works well independently, is a self-starter, and takes initiative to go beyond assigned tasks., • Attention to Detail: Notices issues proactively and maintains a clean, well-kept appearance of the community., • Strong Work Ethic: Keeps busy, completes tasks thoroughly, and doesn't shy away from dirty or repetitive jobs., • Team Player: Communicates and collaborates well with maintenance and leasing teams; helps out when needed without hesitation., • Positive Attitude & Pride in Work: Takes pride in maintaining the property and contributes to community appearance., • Adaptable & Versatile: Willing to take on various responsibilities such as light painting, housekeeping tasks, or supporting maintenance as needed., • You will get dirty: Tasks include picking up trash, cleaning pet waste stations, trashing out apartments, and other potentially unpleasant (but necessary) duties., • Repetition is part of the job: Many tasks (like picking up litter and pet waste) are daily, recurring responsibilities., • Opportunity for Growth: Team members with a great attitude and willingness to learn can grow into more advanced roles in maintenance.

Job Description General Motors has a need for qualified Mechanical Journeypersons (i.e, millwrights, pipefitters, toolmakers, and machine repairman.) You will work under minimal supervision with a high level of independent judgement and problem solving. You should be flexible enough to take on and tackle multiple job assignments in a shift. Preferred Experience Includes: \n • Experience with planned maintenance systems and predictive technologies\n, • Experience with industrial robotics, automation, and conveyance systems\n\n Primary Responsibilities: \n • Follow established safety procedures according to OSHA standards and company procedures\n, • Maintain, dismantle, repair, and replace mechanical and hydraulic components (e. g. bearings, seals, details, carriers, etc.) on industrial machinery such as shafting, motors, generators, air compressors, engines, pumps, cylinders, gears, couplings, linkages, ball screws, high speed CNC spindles, coolant systems and filters, and combustion equipment and valves\n, • Layout, assemble, fabricate, maintain, and repair piping systems\n, • Use various hand or power tools for measuring, cutting, threading, grooving, bending, soldering, assembling, joining, and installing pipes, valves, and fittings\n, • Read and interpret blueprints for the mechanical operation and assembly of conveyor systems, material handling systems, robots, and other automation\n, • Operate mobile equipment (e.g. forklifts, vertical lifts, cranes)\n, • Determine loading requirements to rig equipment and material for lifting\n, • Set up and operate conventional or computer numerically controlled (CNC) machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes\n, • Fabricate punches, tools, steel rule tools and t-sets to exact specifications\n, • Plan sequences of operations for fabricating tools or assemblies using blueprints, sketches, or models\n, • Determine quality of finished products, ensuring defect-free parts, by verifying dimensions, alignment, and clearances for conformance to specifications using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators\n\nAdditional Job Description Additional Job Description Interested individuals must meet the following minimum qualifications: \n • At least six (6) years of related experience in a Mechanical trade (millwright, pipefitter, toolmaker, machine repair) or a U.S. Department of Labor Certificate of Completion in a Mechanical trade (millwright, pipefitter, toolmaker, machine repair). \n, • Must be able to satisfactorily complete the General Motors hiring process requirements which includes comprehensive assessments, drug testing, and a background check\n, • At least 18 years of age \n, • Eligible to work in the United States \n, • Must be willing to work flexible shift hours and day, afternoon, or night shifts as well as overtime hours daily, weekend and holidays on those shifts with little notice \n, • GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU NEED OR WILL NEED GM IMMIGRATION SPONSORSHIP TO WORK OR TO REMAIN EMPLOYED AT GM (e.g., H-1B, TN, STEM OPT, etc.). \n, • \nIf you are a current GM employee operating under a collective bargaining agreement, please contact your local HR/LR for employee placement opportunities.\n, • This position may be filled with a Journeyperson or Journeyperson In Training, the compensation ranges for a JIT include ($36.68-$42.80) or Journeyperson rate of $43.67. Certificates/credentials and scoring in interview will determine your status and pay.\n\n Physical Requirements \n • Quick response to safety instructions, alarms, and signals are a must\n, • Ability to work and stand for extended periods\n, • Comfortably wear personal protective equipment\n, • Navigate a busy environment\n, • Bend, twist, kneel, crouch, and reach\n, • May need to lift or carry materials weighing up to 50 lbs. depending on department\n, • Occasional sitting during certain tasks\n, • Drive mobile equipment when needed\n\n General Motors UAW hourly employment offers a very competitive compensation and benefit package. An annual incentive payout is also available, as qualified. Relocation and travel expenses will be the responsibility of the applicant. Please note - per the labor agreement between GM and the UAW, GM may share information and documentation relating to the credentials of applicants for this position (e.g., resumes, journeyperson cards, interview notes, certificates, etc.) with UAW personnel who have a need to know as part of their role on the UAW skilled trades team. About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards Resources. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, emailus or call us at 800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Job Description Quality Packaging (Qual Pac) is looking for individuals who have a strong professional ethic, are passionate about innovating for positive change, and are collaborative team players. We have been in business for over 50 years. Our success is due to a culture created by our founder that embodies these principles: Our employees are our most important asset, we stand by our word, and our customer’s needs are our number one priority. If you are looking for a career where you make a difference with over 1,000 team players, please read on. Receptionist / Administrative Clerk Position Summary The Receptionist/Administrative Clerk serves as the first point of contact for visitors and callers while also supporting various administrative tasks to ensure the smooth and efficient operation of the corporate office. This role requires a professional demeanor, strong organizational skills, and the ability to multitask in a dynamic office environment. Pay: $18.00-$19.00 / hr Key Responsibilities Front Desk & Visitor Management • Greet all visitors and callers in a courteous and professional manner, • Answer and direct incoming phone calls to appropriate personnel, • Maintain a clean, organized, and welcoming reception area, • Monitor visitor access and maintain compliance with company security and GMP (Good Manufacturing Practice) procedures, • Issue visitor badges, maintain the visitor log, and follow all required check-in protocols, • Assist with meeting and event coordination, including scheduling, travel arrangements (air, hotel, car rental), and catering, • Receive, sort, and distribute incoming mail and packages, • Prepare outgoing packages, including time-sensitive shipments via FedEx or courier services, • Perform data entry, filing, and other clerical tasks as assigned, • Ensure meeting rooms are properly set up and stocked with necessary materials, • Monitor and organize office supply inventory; place orders as needed, • Perform other administrative tasks and responsibilities as assigned by management Qualifications Education & Experience • High school diploma or equivalent required, • Excellent verbal and written communication skills, • Strong attention to detail and organizational abilities, • Professional appearance and business etiquette, • Ability to multitask and manage time effectively, • Self-motivated and able to work both independently and collaboratively, • Proficient in Microsoft Office Suite (Word, Excel, Outlook, etc.), • Experience with CRM systems such as Dynamics, Salesforce, or similar platforms preferred Physical & Mental Requirements • Ability to sit, stand, and move about for extended periods, • Capable of light lifting (10+ pounds), • Able to operate office equipment such as phones, computers, postage machines, and copiers, • Requires visual acuity for reading and computer work, • Ability to focus, problem solve, and communicate clearly Working Conditions • Standard business office environment with moderate noise and comfortable temperature, • Lighting and ergonomic conditions are adequate, • No hazardous or extreme physical conditions About Pro Pac and Qual Pac Founded in 1971, Professional Packaging Systems (Pro Pac) brings deep knowledge and expertise to provide the best packaging solutions for our customers. We serve every industry, including e-commerce, retail and wholesale food, snack, beverage, specialty manufacturing, fresh produce, hobby and craft, automotive, electronics, pet, cosmetic industries, and many more. We are headquartered in Grand Prairie, Texas, with regional sales branches in El Paso, and Brownsville, TX; and additional contract packaging / fulfillment operations in Brookshire, TX; Charlotte, NC; and Olathe, KS. Come join a growing group of honest, knowledgeable, and skilled professionals who are dedicated to offering superior products and services to those we serve! Visit us at .

Who is Martin Sprocket & Gear? Martin is a progressive leader in the Power Transmission and Bulk Material Handling Industry, classified as an essential business. We are proud of our rich heritage dating back to our beginning in 1951 as a family-run organization. Fast forward to today, we have more than 25 locations in North America. Why is it great to work for us? As an employer of choice, we offer a stable work environment with equal leadership development and career growth opportunities. We take great pride in our people and believe they are our greatest asset. \n • Affordable Medical, Pharmacy, and Dental\n, • Employee Wellness Plan\n, • Life and Disability Insurance\n, • 401k Profit Trust Plan\n, • PTO\n, • Growth Opportunities\n, • Competitive Pay\n, • Company Holidays\n, • 2nd Shift - 6% added to hourly wage\n, • 3rd Shift - 8 % added to hourly wage\n\n\n What will you do? In this role, you will be involved in the machining or processing of metal and non-metallic parts by operating CNC Milling Machines. Key Responsibilities: \n • Set up and operate CNC Lathe machines to perform tasks such as turning, drilling, bar feeder, and live tooling.\n, • Optimize set-up times, maximize machine utilization\n, • Ability to run CNC vertical mills/robo drills\n, • Understand specifications of the tasks by reading blueprints, route instructions\n, • Experience in Geometric Dimensioning and Tolerancing (GD&T)\n, • Troubleshoot programs and make adjustments when needed\n, • Setup CNC lathe machines to complete full cycles to produce a high and low volume of parts, improve productivity, maintain offsets, and inspect parts with a high degree of precision\n, • Follow the in-process part inspection process, and notify the Supervisor/Lead on the occurrence of non-conformance.\n, • Communicate with superintendents, managers, production control, and quality personnel for assignments, and resolve quality issues.\n, • Work safely and wear all required PPE for the duration of the shift. \n, • Document all issues written to ensure a smooth transition between shifts\n, • Check and perform preventive maintenance daily\n, • Schedule: 2nd Shift, Monday - Friday, {3:00 PM - 11:00 PM}.\n\n What are we looking for? We're looking for engaged individuals who are adaptable to a changing environment, take pleasure in learning, and enjoy working with others. Key Competencies: \n • Knowledge of all required measuring equipment which includes calipers, gauges\n, • Proficient math skills\n, • Ability to document machining procedures \n, • Knowledge of metals, part-holding fixtures, and lathe/mill tooling\n, • Experience in Okuma, Mazak, and Mori lathe machines preferred\n, • Simple oral communication skills; ability to read and comprehend instructions written in English and complete simple logs and reports in English\n, • Physically able to handle heavy items, including lifting, pushing, pulling, and positioning components\n, • Work scheduled hours and comply with the company's timekeeping policy and all other company policies\n, • Ability to work in a non-climate-controlled shop environment\n, • Consistently stand for an entire shift\n, • Strong knowledge of machining practices and materials is a must, as is general mechanical knowledge\n, • Willingness to be trained with a desire to learn\n, • Ability to work in a team setting\n, • Great work ethic, reliable, positive attitude\n\n To perform this job successfully, you must be able to report daily to the company's Arlington, TX branch to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable qualified candidates with disabilities to perform the essential functions of the job. Disclaimers The above statements are intended to describe the general nature and level of work being performed by candidates applying for this specific role. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of candidates hired. Martin Sprocket & Gear is an EEO Employer and E-Verify participating employer and we do not discriminate based on race, religion, national origin, sex, sexual orientation, gender identity, age, physical or mental disability, marital status, or veteran status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Position: Custodial/Janitor/Cleaning Date Revised: June 10, 2025 Reports to: Pastor and/or Facilities Manager Location: St. Matthew Catholic Church 2021 New York Ave. Arlington, Texas 76010 The principal duty of all employees is to assist in the mission of the Church in the Diocese of Fort Worth. This job description is not designed to cover or contain a comprehensive listing of all activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. General Position Summary: The Custodian position provides cleaning services, e.g. trash removal, mopping, vacuuming, restroom cleaning etc. in the church, chapel, rooms, cafeteria, Kitchen, and Parish Offices Principal Accountabilities: • Deactivate the alarm system before anyone needs access each day., • Ensure the facility is vacated and all doors are locked at the end of each day or when evening activities are completed., • Assists in keeping the building, including restrooms/hallways clean throughout the day., • Cleans church restrooms, • Cleans restrooms, vacuums carpeted areas and dust all surfaces in the building., • Cleans kitchen sink, counters, coffee maker, and microwave in breakroom, • Empties trashcans in public areas; vacuums all floors in public areas, cleans office doors and windows in Parish Office., • Dusts all furniture in public areas, mops kitchen, bathrooms and front office entrance floors, cleans bathrooms and windowsills in public areas in Parish Office., • Wipes out refrigerator, wipes baseboards, dusts blinds and ceiling corners, vacuums along baseboards and in corners in Parish Office., • For individual offices: empties trashcans, and vacuums floors., • Dusts individual offices on a rotating schedule., • Cleans restrooms., • Activate the alarm system each night after assuring the facility is completely vacated., • Be familiar with the weekly schedule and who will be using the facility., • Assist other areas related to overall maintenance of the system when assigned., • The above does not exhaust duties. Other duties may be requested from time to time from the Business Manager, • Regularly inspects all facilities for cleanliness, safety and status, • Maintains classroom furniture placement and sets up for regular or special meeting as needed., • Responsible for executing safety precautions to minimize security threats in the Church building by assessing/inspecting the entire building at the beginning of each work day for any security breach and at the end of each work day before locking/securing doors upon exiting the Church grounds., • Responsible for all other projects, tasks, etc., as assigned. Supervision Given and/or Received: • Received: moderate supervision given to this position from Parish Pastor, Business Manager Internal Contacts: • Diocese Pastors, Priests, Business Managers, and employees. External Contacts: • Parishioners, diocese vendors, local, state, and federal agency representatives, and auditors. Working Conditions and/or Physical Requirements: • Required to work some on weekends., • This position works in a typical office environment but is subject to stress due to the evolving and quickly expanding business needs, tight deadlines and heavy workloads., • Lifting: Safely lifting 35 lbs. on a regular basis, 50 lbs. on an occasional basis., • Balancing: Maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces., • Standing: Particularly for sustained periods of time., • Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another., • Use of Fingers: Picking, pinching, typing or otherwise working, primarily with fingers rather than with the whole hand or arm as in handling., • Grasping: Applying pressure to an object with the fingers and palm and being able to turn a key and doorknob and operate work tools., • Communicating: Expressing or exchanging ideas by means of the spoken word., • Repetitive Motions: Substantial movements (motions) of the wrists, hands, and/or fingers., • Visual Acuity: Close visual acuity to perform an activity such viewing a security alarm or computer monitor; expansive reading; Visual acuity to determine the accuracy, neatness, thoroughness of work assigned (i.e., custodial, general labor, etc.). or to make general observations of facilities or structures (i.e., inspection, etc.), • Climbing: Ability to ascend and descend ladders (including 6', 8', 12', 25' and roof hatch ladders), stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms. Body agility is emphasized., • Stooping: Bending body downward and forward by bending spine at the waist., • Kneeling: Bending legs at knee to come to a rest on knee or knees., • Crouching: Bending the body downward and forward by bending leg and spine., • Crawling: Moving about on hands and knees or hands and feet., • Reaching: Extending hand(s) and arm(s) in any direction., • Pushing: Using upper extremities to press against something with steady force to thrust forward, downward or outward., • Pulling: Using upper extremities to exert force to draw, drag, haul or tug objects in a sustained motion., • Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching skin, particularly that of fingertips., • Hearing: Perceiving the nature of sounds at normal speaking levels or with correction. Ability to receive detailed information through oral communication and make fine discriminations in sound., • Ability to exert up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects., • Ability to lift up to 35 pounds without assistance and up to 60 pounds with assistance. Travel Requirements: • Infrequent travel, by car, may be required to Diocese Parishes. Education and Experience Preferred: • Must have a high school diploma or G.E.D., • Experience in Janitorial. Knowledge and Skills Preferred: • Active member of a Roman Catholic parish faith community, • Knowledge of cleaning/janitorial equipment and supplies and their safe use and storage, • Excellent communication skills and ability to clearly express or exchange ideas by means of the verbal and written communication. Must be personable and able to converse intelligently and work effectively with contractors, parishioners, and staff., • Ability to honor and maintain confidentiality, • Ability to self-motivate, manage responsibilities, and work independently, • Ability to organize, prioritize, and utilize effective time-management techniques., • Positive attitude, personable, ability to work effectively with all types of people, • Skill in critical thinking and planning, • Ability to work in various climate conditions., • MUST BE BILINGUAL ENGLISH AND SPANISH FLSA Designation: Non Exempt- Full Time

As the Senior Maintenance Manager M&RE, you will oversee the maintenance and reliability of one of our flagship fulfillment centers. Partnering with the M&RE senior leadership team, you will define, develop and deliver the maintenance roadmap and set the standard for operational efficiency within y

The Maintenance Technician performs preventive maintenance and repairs on production equipment and systems (e. Shift Maintenance Technician - O'Neal Steel / Grand Prairie, TX. O'Neal Steel has an opening for a 3rd shift Maintenance Technician at our Grand Prairie, TX facility.

Responsible for the completion of a variety of tasks relating to the preparation and service of food to customers, and to the maintenance of a clean and pleasant dining environment.Essential Duties and Responsibilities:.Some or all of the following (with consideration of Child Labor Laws, where appl

As a Night Maintenance, you will protect the guest experience by ensuring the building and equipment are ready for the next day.

Pool Maintenance and Repair Technician. We continue to grow and are seeking a solution-oriented and customer-focused Pool Maintenance and Repair Technician to join our team. To do this we have built a team of dedicated, enthusiastic technicians who enjoy delivering resort-quality service and treatin

Manage fleet maintenance personnel, activities and equipment readiness at a small FedEx Freight shop location or on a shift at a large FedEx Freight shop location. FedEx Freight is an Equal Opportunity Employer, including disabled and veterans.

Location: Irving, TX (Fully Onsite) Duration: CTH.Software Engineer to join our team.The ideal candidate would be able to support our C#.NET 8 back-end maintenance and enhancement of our backend API that is pivotal in delivering robust services to a diverse range of clients.This crucial role involve

Location: Irving, TX (Fully Onsite) (Local Candidates Only) 3 months contract to hire Over 13+ years.Software Engineer to join our team.The ideal candidate would be able to support our C#.NET 8 back-end maintenance and enhancement of our backend API that is pivotal in delivering robust services to a

Manpower - JobID: 5756949 [Maintenance Mechanic] As a Maintenance Technician at Manpower, you'll: Maintain and repair industrial equipment; Troubleshoot electrical and mechanical issues; Perform preventative maintenance tasks; Assist with equipment installations; Document maintenance activities; Ens

Compass Group - JobID: C89C495AD5CA48F178420DA2426CAEC1 [Maintenance Technician] As a Maintenance Worker at Compass Group, you'll: Provide quality customer service by providing one-on-one attention to detail; Clean and polish furniture and fixtures; Perform minor repairs to doors, fixtures and furni

Lead the Charge in Maintenance Mastery. Were looking for a Preventative Maintenance Crew Lead to be the go-to expert on the job siteguiding your crew, rolling up your sleeves, and keeping our top-tier finishing systems operating at their best. Leading and performing regular maintenance like filter c

Demonstrated experience working across multiple organizations (IT, Engineering, I&C Maintenance, Regulatory Affairs, Operations, Security, etc. Capabilities and/or knowledge of cyber security controls relating to operating systems, firewalls, IDS, hardening, access control, authentication, anti-viru

Walmart is hiring General Maintenance Technicians! You will make an impact as a maintenance technician by diagnosing, repairing, and performing preventative maintenance duties for all commercial equipment to support our Walmart stores! You will be responsible to develop preventative maintenance sche

Job Description Position Overview As a Customer Solution Representative you will manage and process customer orders, identify and resolve order issues and engage in strategic cross-selling or upselling initiatives. You will play a key role in working closely with customers to meet their needs, understand challenges and ensure they have a successful and positive experience. Responsibilities Include • Customer Orders & Interaction: Engage with customers through various communication channels (phone, fax, email and will call) to manage orders, understand their needs and ensure seamless order fulfillment. Key orders daily and resolve issues quickly and precisely., • Calls answered within 2 Rings, • Process Returns, • Assist Walk-in Customers (where applicable), • eCommerce Set-Up, • 2 hour or Less Email Response Times, • Management of Shared Team Mailbox, • Open & Close Cash Drawer (P21), • Customer Relationship Management: Support with building and maintaining positive relationships with customers to increase loyalty and repeat business., • Immediate Response to Customer Issues, • Follow-Up on Delivery Issues, • Store Customer Credit Card Information, • Customer & Ship-To Maintenance, • Customer/Delivery Note Maintenance, • Customer Growth Initiatives:, • Cross-Selling - Identify opportunities to offer additional products or services that complement the customer’s original purchase, increasing overall sales and customer satisfaction., • Upselling - Identify opportunities to persuade customers to upgrade to higher-value products or services that better meet their needs, emphasizing the benefits and added value., • At least 1 year of Customer Service experience, • Excellent verbal and written communication skills that portray professionalism and strong interpersonal skills, • Proficiency with CRM software and other customer support tools, • Keen attention to detail and accuracy in handling data and documentation, • A proactive nature with strong problem-solving skills, • Strong organizational and time management skills, • Ability to work independently and collaboratively, • Customer-centric with a focus on delivering exceptional service, • Ability to physically sit at a desk for long periods, operate a computer, and listen/speak clearly on the phone IND1 Full-Time

Job Description Non-Sterile Compounding Technician About Us: Carie Boyd Pharmaceuticals is a national 503B FDA outsourcing registered facility, enabling us to meet the needs of our patients and prescribers through a variety of office use products including but not limited to injectables, pellets, and topicals. Being a member of the Carie Boyd team means prioritizing patient needs, dedication to quality, and the drive to continue to scale our innovative business in new and diverse ways. Job Summary: Assists in the production of non-sterile compounds Job Activities and Responsibilities: • Follows strict policies and procedure as outlined by the Standard Operating Procedure (SOP) and Good Manufacturing Practices (GMP) to perform various tasks, • Performs production in non-sterile compounding suite and follows cGMP, • Understands and recognizes the requirements of USP <795>, • Follows company policy to perform proper hand washing, garbing, and gowning techniques for a non-sterile compounding environment, • Performs cleaning and disinfection on a daily, weekly, and monthly basis, • Properly documents all compounding activities by following strict Good Documentation Practices (GDP) policies and procedures., • Retains knowledge of correct operation and ability to utilize and maintain manufacturing devices/equipment, • Competency in proper non-sterile suite conduct and sanitation by following and practicing strict workspace cleaning and disinfecting protocols, • Behavior represents professionalism, proper non-sterile suite conduct, and personal hygiene maintenance, • Competent in compounding technique and practices, • Participates in various aspects of the department including but not limited to:, • Powder hood use, • Data entry, • Assisting in inventory control and stocking of supplies, • Assisting with visually inspecting products for non-conformance, • Assisting with labeling products, • Meets department goals and expectations pertaining to the production schedule, • Collaborates with other departments as needed, • Contributes to any workflow needs and demands deemed necessary by Carie Boyd Minimum Qualifications: • Registration with the Texas State Board of Pharmacy (TSBP) as a Certified Pharmacy Technician or ability to register as a Pharmacy Technician Trainee within the first 90 days of hire, • Works in a non-sterile suite for an extended duration of time, • Basic calculation skills, • Strong work ethic, • Enthusiastic and eager to learn, • Strong attention to detail, highly self-motivated, and displays initiative, • Works independently and within a team, • Great communication skills, • Flexible and willing to adapt to changing protocols and requirements Physical Requirements: • Lifts up to 50 lbs., • Eye exam Confidentiality The employee must maintain the confidentiality of company information and, pursuant to State and Federal Law (including the Health Insurance Portability and Accountability (HIPAA) Act of 1996), protected health information. EOE/ADA Carie Boyd Pharmaceuticals is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Carie Boyd Pharmaceuticals will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer. Company DescriptionWe specialize in compounding office-use and personalized prescription medications.We specialize in compounding office-use and personalized prescription medications.

Job Description Sterile Compounding Technician About Us: Carie Boyd Pharmaceuticals is a national 503B FDA outsourcing registered facility, enabling us to meet the needs of our patients and prescribers through a variety of office use products including but not limited to injectables, pellets, and topicals. Being a member of the Carie Boyd team means prioritizing patient needs, and dedication to quality. We are searching for someone to join our sterile processing team that is able to work full-time, at least 40 hours a week, Monday to Friday from 5 am to 1 pm. Job Summary: Assists in the production of aseptic compounds Job Activities and Responsibilities: • Follows strict policies and procedure as outlined by the Standard Operating Procedure (SOP) and Good Manufacturing Practices (GMP) to perform various tasks · Follows company policy to perform proper hand washing, aseptic garbing, and gowning techniques. · Cleans and disinfects ISO 5, 7, and 8 environments on daily and weekly basis • Properly documents all compounding activities by following strict Good Documentation Practices (GDP) policies and procedures. · Behavior represents professionalism, proper cleanroom conduct, and personal hygiene maintenance · Competent in aseptic technique and compounding practices • Participates in various aspects of the department including but not limited to:, • Working in ISO classified rooms, • Powder hood use, • Working with third party labs, • Performing data entry, • Assisting in inventory control and stocking of supplies, • Assisting with visually inspecting products for non-conformance, • Assisting with labeling products · Contributes to any workflow needs and demands deemed necessary by Carie Boyd Minimum Qualifications: • Registration with the Texas State Board of Pharmacy (TSBP) as a Certified Pharmacy Technician or ability to register as a Pharmacy Technician Trainee within the first 90 days of hire, • High School Diploma or equivalency, • Sterile/IV Certified (APCE accredited) Desired Skills and Aptitude: · Works in an ISO classified rooms for an extended duration of time · Basic calculation skills · Strong work ethic · Enthusiastic and eager to learn · Strong attention to detail, highly self-motivated, and displays initiative · Works independently and within a team · Great communication skills · Flexible and willing to adopt to changing protocols and requirements Physical Requirements: Lifts up to 50 lbs. Eye exam Work Environment • Work environment may include areas that limit wearing jewelry, body piercings, makeup, and long nails/extensions, • When entering certain areas of the facility, requirement includes but not limited to wearing respiratory protection, cleanroom gowns, hair cover and other protective equipment as needed. Confidentiality The employee must maintain the confidentiality of company information and, pursuant to State and Federal Law (including the Health Insurance Portability and Accountability (HIPAA) Act of 1996), protected health information. EOE/ADA Carie Boyd Pharmaceuticals is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Carie Boyd Pharmaceuticals will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer. Company DescriptionWe specialize in compounding office-use and personalized prescription medications.We specialize in compounding office-use and personalized prescription medications.

Job Description Summary The Teacher Assistant supports the Teachers and the Director by helping to create a caring and safe environment for the children and assisting in activities to improve the overall care and quality of education. S/he must be able to communicate, listen and work well with others in a team environment. Assisting the staff in implementing a quality educational program and in developing positive relationships with the children and their parents, the Teacher Assistant observes and documents children’s interest and progress, and relays that information back to parents and staff. Teacher Assistant are responsible for implementing developmentally appropriate activities based on children’s interests and needs under the direction of the Teacher and the Director. Duties • Assist in the implementation of curricula activities and encourage participation by children., • Actively engage in activities; manage cleanliness, maintenance, and availability of classroom materials., • Maintain frequent communications with parents through informal discussions and progress reports., • Encourage self-help and good hygiene through behavior modeling., • Help ensure smooth, daily transition from home to child care center., • Follow all center policies and state regulations., • Maintain personal professional development plan to ensure continuous quality improvement. Requirements • Minimum of 1-2 years of professional child care experience., • High energy., • Ability to work well with others., • Strong oral and written communication skills and basic computer skills., • An understanding of child development., • Excellent leadership, organizational, and interpersonal skills., • Infant/child CPR and First Aid certification., • Must clear full background check and must pass health screening.

The ServiceNow Solution Architect - Cloud Capabilities is responsible for providing architectural guidance and best practices in designing and developing tools and which enable ServiceNow cloud capabilities for McKesson Technology. Accountable for the development and maintenance of the detailed solu

ABOUT Enlisted Sailors in the Navy Cryptology community analyze encrypted electronic communications, jam enemy radar signals, decipher information in foreign languages, and maintain state-of-the-art equipment and networks used to generate top-secret intel. Their other responsibilities include: - Collecting, analyzing, and reporting on communication signals - Utilizing computers, specialized computer-assisted communications equipment, and video display terminals - Serving as an important part of the Information Dominance Corps in its mission to gain a deep understanding of the inner workings of adversaries and develop unmatched knowledge of the battlespace during wartime RESPONSIBILITIES Within Navy Cryptology, there are distinct focus areas that have their own training paths and job descriptions. Each CT role works under the oversight of Cryptologic Warfare Officers (four-year degree required) or Cyber Warfare Engineers (four-year degree required) – and potentially both. Cryptologic Technician Interpretive (CTI) – CTIs serve as experts in linguistics (including Arabic, Chinese, Korean, Persian-Farsi, Russian, and Spanish) and deciphering information in other languages. Their responsibilities include: - Collecting, analyzing, and exploiting foreign language communications of interest - Transcribing, translating, and interpreting foreign language materials - Providing cultural and regional guidance in support of Navy, Joint Force, national, and multinational needs Cryptologic Technician Technical (CTT) – CTTs serve as experts in airborne, shipborne, and land-based radar signals. Their responsibilities include: - Operating electronic intelligence-receiving and direction-finding systems, digital recording devices, analysis terminals, and associated computer equipment - Operating systems that produce high-power jamming signals used to deceive electronic sensors and defeat radar-guided weapons systems - Providing technical and tactical guidance in support of surface, subsurface, air, and special warfare operations Cryptologic Technician Networks (CTN) – CTNs serve as experts in communication network defense and forensics. Their responsibilities include: - Monitoring, identifying, collecting, and analyzing information - Providing computer network risk mitigation and network vulnerability assessments and incident response/reconstruction - Providing network target access tool development - Conducting computer network operations worldwide in support of Navy and Department of Defense missions Cryptologic Technician Maintenance (CTM) – CTMs serve as experts in the preventive and corrective maintenance of sophisticated cryptologic equipment, networks, and systems. Their responsibilities include: - Installing, testing, troubleshooting, repairing, or replacing cryptologic networks, physical security systems, electronic equipment, antennas, personal computers, auxiliary equipment, digital and optical interfaces, and data systems - Configuring, monitoring, and evaluating Information Operations (IO), Information Warfare (IW) systems, and Information Assurance (IA) operations Cryptologic Technician Collection (CTR) – CTRs serve as experts in intercepting signals. Their responsibilities include: - Analyzing and reporting on communication signals using computers, specialized computer-assisted communications equipment, video display terminals, and electronic/magnetic tape recorders - Exploiting signals of interest to identify, locate, and report worldwide threats - Providing tactical and strategic signals intelligence, technical guidance, and information warfare support to surface, subsurface, air, and special warfare units WORK ENVIRONMENT Cryptologic Technicians perform a variety of duties worldwide, at numerous overseas and stateside shore commands; aboard surface ships, aircraft, and submarines; and with Naval Special Warfare – generally dividing time between assignments ashore and afloat. Duties could be performed in an office setting, lab-type setting, specialized maintenance shop, secure space, or watch environment. As a CT, you may work independently or as part of small, coordinated teams – ultimately under the supervision of Information Warfare Officers (four-year degree required) or Cyber Warfare Engineers (four-year degree required). TRAINING & ADVANCEMENT Upon completion of initial 7–9 week Recruit Training (known as Boot Camp), those pursuing a Cryptologic Technician role report to either Pensacola, Fla., or Monterey, Calif., to receive formal Navy schooling in their specialty area within the field of cryptology. This consists of technical “A” School and possibly advanced “C” School or “F” School. CTI training – Class “A” School is broken into two phases. Phase One takes place at the Defense Language Institute, Monterey, Calif., and is anywhere from 27 to 64 weeks long. Phase Two is 12 weeks long. Class “F” School is conducted at the Regional Center for Excellence in Monterey, Calif. CTT training – Class “A” School is approximately 17 weeks long. After “A” school, some CTTs will attend a Class “C” School that is approximately 26 weeks in duration. The schools are located in Pensacola, Fla. CTN training – Class “A” School is 26 weeks long and located in Pensacola, Fla. CTM training – Class “A” School is approximately 10 weeks in duration and located in Pensacola, Fla. CTR training – Class “A” School is approximately 22 weeks long. The school is located in Pensacola, Fla. Promotion opportunities are regularly available but competitive and based on performance. It’s also important to note that specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields. To learn more about the specific training path for any of the focus areas within the field of cryptology, locate a recruiter. EDUCATION OPPORTUNITIES Beyond offering access to professional credentials and certifications, Navy technical and operational training in the field of intelligence can translate to credit hours toward a bachelor's or associate degree through the American Council on Education. You may also continue your education through opportunities like the following: - Navy College Program and Tuition Assistance - Post-9/11 GI Bill QUALIFICATIONS & REQUIREMENTS A four-year degree is not required to become a member of the Navy electronics community. There are some specific requirements that apply to electronics jobs in advanced programs such as SECF and NF. Contact a recruiter for details. A high school diploma or equivalent is required to become an Enlisted Sailor in the cryptology field in the Navy. Those seeking a Cryptologic Technician position must be U.S. citizens who can meet eligibility requirements for a Top Secret/Sensitive Compartmented Information security clearance. They should have an interest in advanced electronics and technology; exceptionally good character; good speaking, writing, and record-keeping skills; a good working aptitude for math; and the capability to do highly detail-oriented, highly classified work. Specific qualifications vary depending upon specialization area within the field of cryptology. Contact a recruiter for details. General qualifications may vary depending upon whether you’re currently serving, whether you’ve served before, or whether you’ve never served before.

Keurig Dr Pepper - JobID: 85465901936 [Field Technician / Maintenance Mechanic] As a Production Technician at Keurig Dr Pepper, you'll: Deliver success in the production processes including enabling the operation of manufacturing equipment; Understand the operational, electrical, mechanical, and sof

TNAA TotalMed RN is seeking a travel nurse RN Cardiac Cath Lab for a travel nursing job in Arlington, Texas. • Specialty: Cardiac Cath Lab, • Discipline: RN, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel We're looking for Cardiac Cath Lab RNs for an immediate travel nurse opening in Arlington, TX. The right RN should have 1-2 years recent acute care experience. Read below for more requirements. As a Cath Lab RN, you'll work with a highly skilled team of medical professionals in a cardiovascular surgical environment providing assistance to the physician including maintenance and monitoring of EKG equipment, and assisting during angioplasty, cardiac catheterization and electrophysiology. As a Cath Lab Travel Nurse, you should be prepared to perform the following tasks: • Learn complex technologies effectively., • Assist physicians with cardiac catheterization as a way to diagnose heart conditions or as a treatment., • Assist with angioplasties, valvuloplasties and stent placements., • Help implant pacemakers and implantable cardioverter-defibrillators (ICDs). Cath Lab Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. Because of the fast-paced environment, Cardiac Cath Lab Travel Nurses must possess good skills for coping with stress and be able to relate to people of all ages and backgrounds. Requirements*: ACLS, BLS, 1 Year • Additional certifications may be required before beginning an assignment. TotalMed Travel Job ID #1281937. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Catheterization lab - CathLab RN - Travel Nurse TotalMed is a Top Ten, travel nursing and healthcare staffing agency with the mission of igniting purpose in healthcare. The organization staffs nurses, therapists, pharmacists, and other clinicians of all specialties in all 50 states. They offer local and travel jobs and match caregivers with the right organization to assist both facilities and patients. As an organization, they focus on putting highly-skilled staff into facilities to ensure adequate staffing for a better patient experience. TotalMed specializes in recruiting and placing healthcare professionals in travel, PRN, and permanent positions across the country in Nursing and Allied Health. Throughout 2020, the organization filled roles at even the most short-staffed facilities during the most challenging time in healthcare. By matching the right travel healthcare professional with the right organization, TotalMed continues to offer a lifeline to facilities and their patients. • Weekly pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Sick pay, • Wellness and fitness programs, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1

Job Description Business Systems Integration Project Manager – Finance On-Site in Grand Prairie, TX No Relocation Offered Location: Grand Prairie, TX $125-145K About Stripe-A-Zone For 75 years, Stripe-A-Zone, a Frontline Road Safety Group company, has been a leader in the pavement marking and road striping industry, delivering quality, safety, and innovation across Texas and beyond. As part of our continued growth, we are seeking a Systems Integration Project Manager – Finance to lead critical finance-related system integration initiatives, particularly during mergers and acquisitions, while collaborating closely with cross-functional teams. Position Summary This role is ideal for a finance process leader with strong M&A systems integration expertise, who can bridge the gap between business operations and technical execution. The position will focus on optimizing financial processes, ensuring seamless integration of new systems, and supporting business transformation initiatives. Travel (less than 20%) will be required to potential acquisition targets and project sites. Key Responsibilities Lead Finance-Centric System Integration Projects • Oversee planning, execution, and delivery of system integration initiatives, ensuring alignment between finance processes and technology solutions., • Lead the financial systems integration of acquired companies, including system consolidation, data migration, process alignment, and risk mitigation., • Develop clear documentation for workflows, configurations, troubleshooting procedures, and integration plans., • Bachelor’s degree in Finance, Accounting, Business Administration, or related field (MBA or relevant certifications a plus)., • 5+ years of experience in finance process improvement, system integration, or similar roles., • Experience with PowerBI required, both in creation and maintenance of dashboards, • Strong understanding of financial systems and reporting tools; familiarity with B2W scheduling software, Sage Intacct and HCSS preferred., • Proven track record in leading cross-functional projects, particularly within mergers & acquisitions., • Excellent communication, problem-solving, and organizational skills., • Ability to travel up to 20% for acquisition assessments and project execution.