Trabajos material en San Diego, California - Page 2Crear alertas

Olgoonik is an Equal Opportunity Employer Overview: Drive gas or diesel powered trucks. Pick up, transport and deliver parts, material, equipment and components to pre-determined destinations. Vehicles typically carry cargo less than 4 tons. Drive vehicles both on and off of Government installations and in light to heavy traffic conditions. Transport Hazardous Material (HAZMAT) as necessary in performance of depot mission. Primary Responsibilities: • Drive trucks less than 26,000 pounds to destination for pick up and delivery based on instructions or directions received and by using maps., • Inspect truck for defects before and after trips., • Monitor vehicle during operation and report maintenance/repair requirements to Dispatcher., • Secure loads being transported to ensure safe and undamaged arrival at destination., • Report and receive direction via radio or cellular phone., • Assist in loading and unloading of material transported., • Must be able to hook up and/or disconnect tractor-trailer combination vehicles., • Maintain driver log according to ICC regulations., • Perform daily preventive maintenance adjustments to truck., • Perform all other duties as assigned. Supervisory Responsibilities: Perform supervisory duties as assigned. Education and/or Experience: • Must have High School Diploma or GED (May substitute experience for education on a year-by-year basis)., • Must be able to obtain license to use any equipment for which a current license is not held within 30 days of selection., • Minimum six months general experience., • Minimum of six months specific experience demonstrating knowledge required to perform duties of position. Knowledge, Skills, and Abilities: • Must be proficient with Microsoft Suite of products including, Word, Excel, Access and E-mail business software., • Must demonstrate a good attitude and ability to work as a member of a Team., • Must be self-motivated and have the ability to work effectively under a minimum of supervision., • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail. Certificates, Licenses, Registrations: • Must have valid Commercial Driver's License (CDL). Security Clearance: SECRET Level Required • Must have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered Investigation., • Must be a U.S. Citizen., • Must also be able to maintain a US Government SECRET clearance. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs. overhead and/or repetitively. Outside work in hot and cold or wet weather is occasionally required.

Number ICIMS-2026-10080 Job function QA&RA Job type Temporary Location Werfen - San Diego - AID - 9900 Old Grove Road San Diego, California 92131-1638 United States Country United States Shift 1st Introduction Werfen Werfen is a growing, family-owned, innovative company founded in 1966 in Barcelona, Spain. We are a worldwide leader in specialized diagnostics in the areas of Hemostasis, Acute Care Diagnostics, Transfusion, Autoimmunity, and Transplant. Through our Original Equipment Manufacturing (OEM) business line, we research, develop, and manufacture customized assays and biomaterials. We operate directly in 30 countries, and in more than 100 territories through distributors. Our Headquarters and Technology Centers are located in the US and Europe, and our workforce is more than 7,000 strong. Our success comes from a specific focus in these rapidly evolving diagnostic areas, our commitment to customers, and our dedication to innovation and quality. We're passionate about providing healthcare professionals the most valuable and complete solutions to improve hospital efficiency and enhance patient care. Overview Job Summary The Temporary Document Control Specialist III guides, executes, and improves Document Control processes including document changes, quality records control, labeling creation, SAP master data entry, and training record maintenance activities. This role ensures compliance with organizational standards and regulatory requirements and improves the efficiency and quality of Document Control processes. The Document Control Specialist III demonstrates subject matter expertise in document control processes and regulatory requirements. The position is responsible for carrying out activities and facilitating processing associated with change orders, SAP training sessions, quality plan tasks, document and record processing, metrics, artwork for labeling, and other tasks to achieve department objectives. The Document Control Specialist III works closely with department management and other Quality teams to ensure activities and tasks are accurately and efficiently completed and also works independently; uses professional judgement to make decisions with in areas of authority. Completes work in accordance with Inova Quality Management System. Responsibilities Key Accountabilities The main activities for this role include: • Document and Data Processing and Entry - Initiate and process change orders: review change orders verbiage and content for errors, inconsistencies, and incompleteness; confirm documents and records comply with standardized formats and file naming conventions; and affected items; confirm approvers are appropriate to the change; communicate proactively with stakeholders to ensure efficiency of change order processing; work with change owners and reviewers on required corrections and clarifications; monitor aging change orders and facilitate issues resolution in a timely manner; ensure completion of implementation actions prior to effective status of the change; and coordinate periodic review. Maintain signature and delegation records. Create and maintain SAP master data. Ensure physical controlled copies are maintained at point of use., • Document and Record Lifecycle Management- Optimize processes while performing creation, acceptance, review, storage, distribution, and archiving controlled documents and records from initiation through obsolescence and disposal., • Department Procedures - Create and revise document and record lifecycle management, training, and product labeling SOPs, work instructions, checklists, forms, and templates. Maintain accuracy and compliancy of procedures., • Process Improvement - Lead and implement Document Control department process improvements for accuracy, efficiency, effectiveness, and cycle times. Make process corrections based on process data trends. Represent Document Control in cross-functional projects., • Training & Support - SME for training in Document Control department activities and requirements. Develop, deliver and maintain training materials for document control practices to the organization. Train new team members to procedures. Assist in creation of training sessions, and follow-up on completion of training by users., • Metrics & Reporting - Maintain tracking data and reporting documents, labeling, and training metrics, reports, and dashboards. Analyze and respond to trends., • Product Labeling - Optimize processes while performing creation, review, maintenance, and archiving product labeling from initiation through obsolescence. Print restricted product labeling., • Quality Records Management - Optimize processes while performing scanning, filing, archival and disposal of paper and electronic quality records through required retain durations as well as processing quality records for off-site storage., • Audit Support - Support internal and external audits and regulatory inspections. At minimum, pull requested audit documents and records, respond to auditor queries, represent Document Control in audits and inspections., • Compliance - Follow applicable Werfen standard operating procedures (SOPs), national and international and other Quality System regulations, ISO standards, as well as applicable Environmental Health & Safety, Human Resources and all other regulatory and administrative policies.., • Perform other duties and responsibilities as assigned. Networking/Key relationships • Quality Teams, • Regulatory Teams, • Manufacturing Teams, • Operations Teams, • Marketing Teams, • Supply Chain Teams, • Legal & Human Resources Minimum Knowledge & Experience required for the position: Education: Bachelor's degree in a relevant field (e.g., Life Sciences) or equivalent experience required. • Advanced knowledge of document lifecycle management and maintaining documents within quality system requirements., • Advanced knowledge of Quality Management System regulations ISO 13485, and related standards as pertain to document, quality record, training records, labeling artwork control., • Advanced experience in drafting, updating, and implementing SOPs, work instructions, forms, templates, and other QMS controlled documents., • Advanced experience in document control configuration and document lifecycle management within a regulated quality management system., • Advanced experience with SAP for document control and material master management., • Experience leading departmental projects as well as providing representation in interdepartmental projects., • Experience with quality-related training systems., • Experience with computerized information systems (e.g., ERP, eDMS, LMS) required. Skills & Capabilities: • Attention to Detail & Accuracy: Thorough attention to detail and commitment to accuracy; ensures completeness and precision in documentation., • Organization & Time Management: Proficient organizational skills with the ability to manage multiple priorities and meet deadlines in a fast-paced environment., • Communication: Proficient written and verbal communication skills in English; able to effectively communicate and train on document control requirements and processes., • Collaboration & Interpersonal Skills: Advanced interpersonal skills for cross-functional collaboration; able to influence and negotiate to achieve optimal outcomes., • Customer Service Orientation: Responds promptly to requests and drives stakeholder satisfaction., • Process Improvement: Ability to analyze current processes, identify gaps, and implement effective solutions., • Adaptability: Ability to support changing business needs and work effectively in dynamic environments., • Problem-Solving: Proficient in identifying and resolving complex issues and problems; seeks help and guidance for cross-functional issues and problems. Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to communicate. Must be able to detect, identify and inspect scientific data. The employee will be required to stand and/or walk up to 8 hours per day and/or sit for up to 8 hours per day. Must be able to use hands to feel objects, including keyboard, telephone and pipettes or other lab equipment. May need to reach with hands and arms, climb stairs, balance, stoop, kneel or crouch. Will be required to talk and hear and have specific vision abilities, including close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. May occasionally have to lift and/or move up to 25 pounds. The noise level in the work environment will vary but is usually moderate. This position is very active and requires varying levels of mobility. The annual base salary range for this role is currently $24.00 range to $34.00 range. Individual employee compensation will ultimately depend on factors including education, relevant experience, skillset, knowledge, and particular business needs. This is a 3-12-month job contract. This role is eligible for medical, dental, and vision insurance, 401k plan retirement benefits with an employer match, as well as paid vacation and sick leave. Our sales roles are eligible for participation in a commission plan and our management, and select professional roles, are eligible for a performance-based bonus. If you are interested in constantly learning and being challenged on a daily basis we encourage you to submit your resume or CV. Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen strictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact for assistance. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team. If you are interested in constantly learning and being challenged on a daily basis we encourage you to submi Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen s trictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact for assistance.t your resume or CV. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Promote Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Plant Operation. Load hot mix asphalt into haul trucks. Manufacture various asphalt products according to mix design and customer jobsite specifications. Operate plant equipment to regulate flow of materials to and from conveyors, chutes, pumps, and storage bins. Control inventory of materials. Inspect Equipment, Structures, and Material. Perform daily inspections of the auxiliary equipment and document items in need of repair or service. Maintain stationary hot mix asphalt equipment, including but not limited to conveyors, shakers, drives, and screws. Diagnose problems and perform mechanical repair and maintenance. Monitor Processes and Materials. Monitor and review plant equipment systems to ensure continuous flow of materials and maintain certified products. Remove clogged materials when applicable. Document and Record Information. Assist plant management with record keeping and daily production schedules for submitting reports on production and maintenance. Read and write delivery tickets to determine the mix design called for each load. Issue delivery tickets to customers. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Previous experience in the aggregate or construction industry is preferred. Knowledge of Best Practices. A basic knowledge of the asphalt or construction industry is preferred. Flexibility. Must be willing to work overtime and extended hours depending on customer and company demands. Must be able to sit for long periods of time, work outside in all types of weather conditions, and tolerate being exposed to loud noises. Mechanical Skills. Must have some knowledge of industrial tools, their uses, and maintenance. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for ___ in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. ___ to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impact daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing ___. Health Benefits. Medical, Dental, Vision programs, ___. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see ___ and helping our employees meet their goals as a key part of our business. Salary Range. The base hourly range for this role is between $38.00 - $46.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our ___ as it relates to the use of temporary staffing agencies, placement services and professional recruiters. : Manufacturing : California-San Diego : GM - SO CAL : Full-time : Apr 15, 2026, 6:48:09 PM

Job Description Labor One is hiring Shipfitter Helpers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for assisting with steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges while under the supervision of a supervisor and/or journeyman / 1st Class shipfitter. The position requires a basic understanding of structural repair procedures and a strong aptitude and ability to follow directions. The individual must possess knowledge of ship terminology, measurements, and the ability to read job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions and general correspondence., 2. Working understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to effectively communicate issues encountered during the job that are in conflict with the directions provided by the supervisor or journeyman / 1st class fitter., 5. Ability to read and interpret structural drawings, including weld symbols., 6. Basic understanding of hand and power tools used by shipfitters including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 7. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 8. Up to one (1) year of experience in a heavy industry. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, before commencing work., 6. Complete daily work assignments and provide status of unfinished work to the journeyman or supervisor., 7. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 8. Respond to visual, verbal, and audible sounds/commands., 9. Work at heights above 12' from ladders, scaffolding, and manlifts., 10. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 11. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 12. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st Shift 40 Hrs per Week OT per hiring Managers approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Kros-Wise is seeking a full-time Production Material Coordinator Technician III in San Diego, CA. Overview: Provide I- Level production material to support ships planned maintenance availabilities. • Ability to complete the SWRMC General Supply Specialist (GSS) Job Qualification Requirement (JQR) within four (4) months of providing direct support., • Ability to perform material management support in accordance with NAVSUP, OPNAV, and DoD supply instructions, manuals, and publications; and SWRMC data system process guides; and standard operating procedures., • Research, tracking, receiving, issuing, storing, and inventory of materials and repair parts. Perform routine inventory counts, validate locations, research and request adjustments for any variances, and resolve errors. Manage Mission Support Material (MSM) and Future Use Material (FUM). Maintain and organize warehousing of MSM and FUM for easy access, identification, inventory, and transfer or issue to the shops. Process offloads of excess material per DoD and NAVSUP policies., • Research and provide materials and repair parts requisition requests to Government GSS personnel for Government Furnished Material (GFM) required for Off-Site Shop work., • Validate and process materials and services requests from assigned shops, create Job Material Lists (JMLs), and follow up on requisitions., • Coordinate pickup and delivery of supplies, materials, and repair parts. Perform quality assurance (QA) functions, such as validating that materials being received are the materials ordered, are in the correct quantities, in good condition, and properly identified and packaged for transport., • Knowledge of MSE, WEBFLIS, WEBVLIPS, One Touch Support (OTS), FedMall, MRO Tracker, GSA Advantage, Haystack, FEDLOG., • Requires working, walking, reaching, sitting and concentration in the presence of noise., • Ability to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways., • Ability to lift, carry and move objects up to 50 lbs. in weight., • Noise conditions range from very quiet to loud., • Required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Job Description Scope: The contractor shall provide an Material Coordinator responsible for overseeing the daily operations of EODESU ONE's physical ILO warehouse in support of Navy EOD-specific Table of Allowance (TOA) logistics. The position encompasses directing, developing, and performing logistics management functions to plan, coordinate, and evaluate the logistical actions necessary to support the command's mission and its expansive growth. They must navigate assignments that require timeliness, flexibility, and the ability to address frequent, short-fused requirements by formulating solutions and providing actionable recommendations. Balancing day-to-day operations with the prioritization of urgent objectives, while maintaining the continuity of ongoing activities, is a constant and essential aspect of this role. Complexity: Serve as a subject matter expert in mission management, life-cycle sustainment, and materiel readiness, leveraging diverse supply, finance, and logistics management processes to analyze information, evaluate subordinate unit performance, and recommend process, planning, or funding adjustments. Utilize professional judgment to plan, organize, and execute intricate analytical decisions in a dynamic environment with shifting priorities, ensuring maximum mission effectiveness. Oversee multifaceted planning, information systems, and management programs impacting EOD, MDSU, and U.S. Navy operations. Develop and implement innovative methods, prioritize competing requirements, and resolve highly challenging issues under pressure. Monitor performance, identify areas for improvement, design and implement measurement tools, and validate outcomes, ensuring resourceful and strategic decision-making in support of mission-critical objectives. Major Duties & Responsibilities: • Direct all warehouse functions including issue,receipt,storage,shipment,and maintenance of TOA equipment and materials in accordance with established Navy supply procedures and command, • Serve as the lead for inventory management, materiel readiness,and life cycle sustainment planning for EODGRU ONE units., • Interface regularly with Echelon IV–VI commands and ensure accurate warehouse data entry in DPAS and related Navy logistics systems., • Conduct and supervise all warehouse audits, inspections, and corrective actions related to missing/lost/stolen property, FLIPLs, and DRMO transfers., • Provide TOA subject matter expertise to Equipment Review Boards (ERBs), including recommendations for technical refresh, phased replacement, and urgent requirement, • Coordinate and track TOA items requiring Depot Level Repair(DLR), maintaining audit-ready records for asset check-in/check-out.Knowledge Required by the Position:, • Demonstrated expertise in logistics management concepts, including coordination and integration of supply-related operational issues to support complex missions effectively., • Proficient in supply programs, policies, nomenclature, and automated record-keeping systems,with the ability to analyze and resolve logistical problems., • Skilled in qualitative and quantitative methods for assessing and improving management processes and systems., • Thorough knowledge of contracting procedures and policies, including proficiency with online tools like Wide Area Work Flow (WAWF) for contractor performance management and reporting., • Comprehensive understanding of supply and property book regulations, directives, and SOPs to manage and control equipment, property, and supplies effectively., • Knowledge of government and commercial shipping and receiving operations to oversee supply department performance and address capability gaps., • Familiar with Naval Expeditionary Combat Command structure, mission requirements, and internal policies, with the ability to operate effectively in a senior staff capacity., • Proficient in using Microsoft Office software(Word,PowerPoint,Excel,Access,andOutlook)and specialized DOD/DON software applications, including DPAS, OMMSNG, and DRRS-S., • Experienced with the EOD Force Table of Allowance(TOA),including knowledge of equipment characteristics and related directives, manuals, and instructions., • StrongworkingknowledgeofNavyEODmissionareas,NavyandJointMilitaryForces,andall Navy Expeditionary Combat Command forces., • Resourceful in large-scale inventory and warehouse management, including Defense Property Accountability System(DPAS)operations, with an emphasis on accuracy and accountability for mission-critical equipment., • Skilledcommunicatorwithexcellentwrittenandoralcommunicationabilities,capableofpresenting facts, recommendations, and reports clearly and concisely., • Proficient in data visualization, including developing spreadsheets,charts, and graphs to support decision-making., • Strong interpersonal and team work skills, with a high degree of self-motivation and the ability to work independently., • Experienced in managing inventory across Navy Echelon IV and V Commands, with expertise in resource management for over $150 million in mission-essential equipment., • Knowledgeable in Navy Maintenance and Material Management(3M) programs and TOA Viewer Program for inventory accuracy and reporting., • Demonstratedexperiencemanagingphysicalwarehouseoperations,includingmaterielreceipt, issue, storage, shipping, and inventory accountability., • Proficient in the use of DPAS for property tracking and accountability,with emphasis on physical TOA commodity management., • Familiarity with Navy and DoD equipment handling procedures,including oversight of inspection, maintenance, and calibration cycles., • ExperiencepreparingandprocessingDD1348-1A,DD1149,DD200(FLIPL),and MLSR, • Knowledge of DRMO/ disposition procedures and depot-level repair(DLR), • Strong understanding of NAVSUPP-485, COMNECCPACINST2B, and relevant NECC TOA guidance., • Proficient in Microsoft Excel and SharePoint for inventory tracking, documentation, and, • Must have,or be able to obtain or renew, a Forklift Operator's Job Posted by ApplicantPro

Job Description Labor One is hiring Journey-Level Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: -This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. -The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE: 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES: 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT: -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary About Us: We are a family-owned steel fabrication shop specializing in custom metalwork for commercial, industrial, and residential clients. With a commitment to quality, we take pride in delivering exceptional results. Responsibilities: • Lead, mentor, and train a team of skilled welders and fabricators., • Plan, assign, and direct daily welding and fabrication tasks to meet production schedules and deadlines., • Interpret blueprints, engineering drawings, and specifications to ensure accurate fabrication and assembly., • Perform various welding techniques (MIG, TIG, Arc, etc.) on different materials (steel, stainless steel, aluminum, etc.)., • Fabricate and assemble metal parts, brackets, and structures according to required dimensions and tolerances., • Conduct quality control inspections of finished products, ensuring adherence to quality standards and specifications., • Monitor project progress, track milestones, and report weekly updates to management., • Identify opportunities for process enhancements and efficiency improvements within the fabrication shop., • Ensure all safety protocols and procedures are strictly followed, maintaining a safe and organized work environment., • Estimate time and material costs for custom fabrication projects., • Operate and maintain a variety of welding and fabrication equipment, including torches, power supplies, saws, grinders, and other machine shop tools., • Troubleshoot and repair equipment as needed. Qualifications: • Proven experience as a welder/fabricator, with at least 3+ in a lead or supervisory role., • Expertise in various welding processes (MIG, TIG, Stick, Flux-Core, etc.) and ability to work with diverse metals., • Strong ability to read and interpret complex blueprints, technical drawings, and welding symbols., • Proficient in using measuring devices such as calipers, micrometers, and depth gauges., • Excellent knowledge of metal fabrication techniques, including cutting, shaping, bending, and assembly., • Demonstrated leadership skills, with the ability to motivate, train, and manage a team effectively., • Strong problem-solving abilities and attention to detail., • Commitment to maintaining a safe work environment and adhering to all safety regulations., • Ability to lift and move heavy objects (50+ lbs.) and stand/be active for extended periods., • Strong communication and interpersonal skills., • Valid driver's license (if applicable for occasional travel or material pick-up). Preferred (but not required): • Experience with CNC cutting machines., • Familiarity with lean manufacturing principles. Benefits: • Competitive salary based on experience and qualifications., • Opportunities for professional development and growth., • A supportive and collaborative team environment. To Apply: Please fill out application and we will be in contact with you. PCIW Steel Corp is an Equal Opportunity Employer.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Adheres to SOPs & work instructions, • Performs cycle counts and accurately logs results into ERP system, • Maintains a clean and organized work area specifically all products, • Completes daily cycle count sheets reports discrepancies or inconsistencies to management, • Responds to & fulfills material requests from various depts. accurately logs into ERP system and reviews/verifies logged transactions, • Adheres to all safety regulations, • Cross trains across multiple depts. as needed, • Reports other issues, concerns, and/or inconsistencies to management, • High school diploma or GED, • Previous cycle count and/or inventory experience in a manufacturing/production floor, • Proficiency with MS Office (i.e. Word, Excel, Outlook, PowerPoint), • Ability to follow written & verbal instructions, • Team Player, • Strong attention to detail, • Dependable and can adhere to a work schedule, • Good written & verbal communication Skills, • Can lift up to 50 lbs.

Job Description Job Description: This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned. 4. Be accountable for completion of daily work assignments., 4. Comply with OSHA standards and BAE best safety practices., 5. Keep your work area clean and safe at all times, especially at the end of the shift., 6. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company’s “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12’ from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Chula Vista, CA Summary: Shipfitters are responsible for the layout, fabrication and installation of structural parts such as plates, bulkheads and frames. Shipfitters brace structures in position for welding. Shipfitters prepare templates for fabrication of nonstandard parts. Duties and Responsibilities include the following. Other duties may be assigned. • Helps fabricate template for bending / shaping ship structures, frames, bulkheads and braces., • Assists with measurements, layout and cutting of templates., • Completes pre and post weld checks., • Performs chipping, beveling, grinding and cleaning of surfaces to be welded using power and hand tools., • Perform housekeeping efforts to maintain cleanliness of the worksite., • Deliver materials as required., • Performs duties as Fire Watch., • Participates in special projects as required., • Employees may be required to travel for work to other locations\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • High School diploma or GED., • This position requires 1+ years of experience in the shipfitting trade., • Apprentice school or trade school not required, but preferred. \n\n Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Equipment: • General Hand Tools \n\n Knowledge, Skills and Other Abilities: • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is working on a ship. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $22.16 - $34.00 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-26-00033 This position is currently accepting applications.

Job Description Welder/Fitter - El Cajon, CA - Career Opportunity Job Description • Perform TIG and MIG welding on a wide range of assemblies in accordance with drawings and specifications., • Assist a journeyman welder with fit-up and fabrication tasks, ensuring accurate alignment and assembly of parts., • Read and interpret blueprints and weld symbols to determine weld locations, sequence, and required techniques., • Use fixtures and other tooling to position and secure components during welding and fabrication., • Operate hand grinders and related tools to prepare, clean, and finish welds and materials., • Weld exotic materials, including various alloys, Inconel, and 300/400 series stainless steel., • Weld materials of different thicknesses, such as .032, .060, .090, and .188, while maintaining weld quality and consistency., • Apply welding techniques using back gaps where required to achieve proper penetration and joint integrity., • Set up welding machines, including adjusting amperage and other parameters, to match material and weld requirements., • Document work performed, including type of rod used, type of weld, and other relevant process details., • Identify materials and accurately record information on travelers and related documentation., • Work on assigned jobs both within and adjacent to the core welding field, supporting fabrication and production needs as required., • Proficiency in TIG (GTAW) and MIG (GMAW) welding on assemblies., • Ability to read and interpret blueprints and weld symbols., • Hands-on experience with welding assembly and fixture usage., • Skill in welding exotic materials, including alloys, Inconel, and 300/400 series stainless steel., • Capability to weld materials in multiple thicknesses, including .032, .060, .090, and .188., • Experience setting up weld machines, including amperage adjustments and process parameters., • Competence in using hand grinders and related tools for material preparation and finishing., • Ability to document welding work accurately, including consumables used and weld types., • Skill in identifying materials and recording information on travelers and other production documents., • Ownership of a welding hood suitable for TIG and MIG welding operations., • Ability to fabricate parts under supervision while following detailed instructions and drawings., • Strong attention to detail and commitment to producing clean, consistent, and high-quality welds. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description At Carrier Johnson + Culture (CJ+C), we are fueled by creativity, curiosity, and collaboration. Our team champions a user-first approach that pushes design boundaries and fosters innovation. Our work spans multifamily residential, hospitality, mixed-use, and commercial projects of varying scales and complexities, delivered through collaboration, technical rigor, and thoughtful leadership. As a Senior Interior Designer, you will partner with clients, design leaders, project managers, and interdisciplinary teams to bring thoughtful, high-performing interior environments to life. Your Role As a Senior Interior Designer at CJ+C, you will lead the development and delivery of interior design projects, contributing across multiple projects simultaneously. You will play a key role in translating design concepts into coordinated, buildable solutions while maintaining design intent from early concept through construction. With 10+ years of experience, you are a producing leader who combines strong design sensibility with technical expertise. You are comfortable operating across both design and delivery, contributing to spatial strategy, user experience, and documentation with equal clarity. Your ability to align design vision with execution makes you a critical contributor to project success and team performance. What You Will Do • Lead interior design efforts across all phases of projects, including programming, conceptual design, schematic design, design development, construction documentation, and construction administration., • Actively produce and oversee high-quality drawing sets including plans, reflected ceiling plans, elevations, millwork, and detailed interior assemblies., • Develop and coordinate interior solutions that align with project goals, budgets, schedules, and client expectations., • Coordinate internal teams and external consultants including architecture, MEP, lighting, and specialty disciplines to ensure seamless integration of interior scope with base building systems., • Guide projects through code compliance and regulatory requirements including CBC and ADA standards., • Oversee construction administration including responding to RFIs, reviewing submittals, conducting site visits, and maintaining design intent and quality., • Collaborate closely with Project Managers and Design Leaders on budgeting, scheduling, resource management, specifications, and overall project delivery., • Integrate FF&E documentation within the broader construction documentation set, ensuring alignment between design intent, procurement, and installation., • Uphold rigorous Quality Assurance and Control standards across drawings, specifications, and deliverables., • Contribute to conceptual design, space planning, and user experience strategies, particularly within hospitality and multifamily residential projects., • Collaborate with design leadership to support development of design narratives, material strategies, and experiential concepts., • Apply strong design judgment to detailing and technical solutions to reinforce overall design intent., • Mentor and guide junior and intermediate designers, supporting both design and technical development., • Participate in client coordination and presentations, clearly communicating design and technical solutions. Your Qualifications • Bachelor's or Master's degree in Interior Design, Interior Architecture, or Architecture from an accredited university required., • 10+ years of professional experience with a strong focus on interior project delivery and documentation., • Experience in hospitality, multifamily residential and cultural projects preferred., • NCIDQ certification preferred., • Licensed Architect is a plus, particularly for candidates with integrated architecture and interiors experience., • Advanced proficiency in Revit with demonstrated hands-on experience producing high-quality construction documents and coordinating BIM models., • Strong design portfolio demonstrating ability to contribute from concept through execution., • Deep knowledge of interior detailing, materials, building systems integration, construction methods, and specifications., • Strong knowledge of California Building Code, accessibility requirements, and local permitting processes., • Proven ability to coordinate multidisciplinary teams and manage multiple projects simultaneously., • Strong problem-solving and decision-making skills with a pragmatic, solution-oriented approach., • Excellent communication and interpersonal skills to clearly convey ideas to clients, consultants, contractors, and internal teams., • Extensive experience in construction administration and resolving field conditions while maintaining design intent., • Commitment to continuous learning, professional development, and knowledge-sharing within the firm. To be considered, please provide a current portfolio and/or work samples in PDF format. Final role, title, and compensation will be commensurate with the candidate's specific expertise and skills.

Job Summary General Atomics Electromagnetic Systems (GA-EMS) designs and manufactures first-of-a-kind electromagnetic and electric power generation systems. GA-EMS' expanding portfolio of specialized products and integrated system solutions support critical fleet, space systems and satellites, missile defense, power and energy, and process and monitoring applications for defense, industrial, and commercial customers worldwide. Under general direction this position is responsible for inspecting cables, parts, assemblies, tooling fixtures and material to ensure compliance with customer requirements, company specifications, and quality requirements. Sets up, operates, inspects, tests, and adjusts new and reworked tools, dies, gauges, jigs and fixtures for conformance to engineering drawings and specifications. Maintains, processes, and updates confidential and sensitive electronic and hard copy reports, records and statistics. DUTIES AND RESPONSIBILITIES:\n • Inspects cables, machined parts, components, assemblies and materials to ensure compliance with appropriate regulatory guidelines (Military Standards, ASTM and ANSI, and ASME Code).\n, • Provides various electronic and hard copy reports of inspections and notifies appropriate parties including project engineers.\n, • Sets up and calibrates measuring and test equipment and schedules service and repair of equipment. May maintain calibration computer databases.\n, • May observe testing and provide oversight, as necessary, to verify compliance with requirements. May perform nondestructive examinations on various metallic and nonmetallic materials, parts, and assemblies using methods such as penetrant, hi-pot and hardness testing.\n, • May interact with regulatory agencies and customers during audits and review of company inspection and calibration activities.\n, • May monitor and verify quality in accordance with statistical process or other control procedures.\n, • Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company.\n, • Expected to work in a safe manner in accordance with established operating procedures and practices.\n Job Qualifications \n • Typically requires an associate's degree, trade school certificate, military training or equivalent in quality inspections or certification by a professional group such as ASQ or AWS, and one or more years of progressive experience in electrical, mechanical, electromechanical or metrology inspection and calibration. May substitute additional experience in lieu of formal education and training.\n, • Must possess:\n, • ability to read and understand engineering drawings and specifications, and perform mathematical computations;\n, • good communication skills to effectively interface with all levels of employees including management;\n, • ability to interpret non-routine information and respond to non-routine issues;\n, • ability to maintain the confidentiality of sensitive information.; and\n, • good computer skills.\n\n\n, • The ability to work independently or in a team environment is essential as is the ability to work extended hours as required.\n, • Experience with IPC-A-610, IPC-D-620, JSTD-001, AS9100 are desirable.\n

Job DescriptionUnder limited supervision and working in a loud environment with a variety of epoxy agents, this position performs a variety of non-routine and non-repetitive procedures and assists in the fabrication, curing, build-up and assembly of various types of composite materials where required information is readily available, methods and sequences have been pre-determined, and tooling is provided. Works with blueprints, templates, sample parts, process sheets and other authorized information. DUTIES AND RESPONSIBILITIES: • Assist in the preparation of molds and forms., • Mark and cut tape, woven material, honeycomb, adhesive and similar materials following templates, guides or specific dimensions and sequences., • Route, drill, trim, and sand to blueprint dimensions and tolerances. Operate vacuum press as required. Assist in the lay-up of composite materials to mold., • Fit and smooth successive layers of materials as necessary to secure build-up free from wrinkles, air pockets and voids following directions and instructions., • Assist in the development of shop aids to facilitate fabrication, trimming and assembly as required., • Assemble Aircraft components using structural adhesives, rivets and threaded fasteners., • Prepare surface and paint composite and metal components including bodywork, contour shaping and sanding. Apply spray application of epoxy paints, urethane and water-based epoxy coatings, using a high-volume low-pressure spray gun., • Check expiration dates of materials prior to use, prepare proper mixes of resins and catalysts. 9. May make continuity checks on work in progress and may monitor and verify quality in accordance with statistical processes or other control procedures., • Maintain records as required. Supports the quality process by maintaining work area in an orderly condition by returning tools, equipment and materials to storage areas., • Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices. Additional Functions: Other duties as assigned or required. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply. Essential Qualifications Typically requires High School diploma or equivalent and five or more years of related experience. • Must be able to verbally communicate, read and comprehend written and verbal instructions, detailed blueprints and other similar authorized drawings and documents, and be capable of doing basic mathematical calculations., • Must be able to use hand tools, such as rollers, paper cutters, scissors, x-acto knives, electric heat gun and fixtures such as molds and mandrels., • Ability to use measuring instruments such as scales and protractors and calipers. Familiarity with common shop tools such as band saws, disk sanders, drill press, wood lathe, etc., • May require respirator certification., • Must be able to work in a loud environment; work extended hours as required; and be able to lift assemblies weighing up to 50 lbs. Equal Opportunity Employer / Disabled / Protected Veterans The Know Your Rights poster is available here: The pay transparency policy is available here: For temporary assignments lasting 13 weeks or longer, the Company is pleased to offer major medical, dental, vision, 401k and any statutory sick pay where required. We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation for any part of the employment process, please contact your staffing representative who will reach out to our HR team. AllSTEM Connections participates in the E-Verify program in certain locations as required by law. Learn more about the E-Verify program. We also consider for employment qualified applicants regardless of criminal histories, consistent with legal requirements, including, if applicable, the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance. Pursuant to applicable state and municipal Fair Chance Laws and Ordinances, we will consider for employment-qualified applicants with arrest and conviction records, including, if applicable, the San Francisco Fair Chance Ordinance. For Los Angeles, CA applicants: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. #3412 Company DescriptionGuiding Principles and Core Values: UP HIRE Understanding Matters. We actively listen to each other, our STEM professionals, and customers. We take the time to understand their needs to make the best connections in the industry. People Matter. People are at the center of our company. All decisions we make are in the best of interest of our employees, co-workers, communities, candidates and customers. Honesty Matters. We conduct our business with integrity and DO the right things. We ARE trustworthy partners WHO stand behind our work and people. Innovation Matters. We are disciplined in bringing forward new thought and solutions that guide the industry and grow our company. Continued growth secures sustainability that provides solid careers for our employees, stability for our STEM professionals, and reliability to our customers. Relationships Matter. We take personal responsibility for all relationships with our employees, co-workers, STEM professionals and customers. Courtesy, dignity and respect EQUAL high performance results. Everything Matters. We hold ourselves accountable to perform with the upmost of professionalism, attention to detail, and highest standard of service. We hit our targets and do what we say we will do.Guiding Principles and Core Values: UP HIRE\r\nUnderstanding Matters.\r\nWe actively listen to each other, our STEM professionals, and customers. We take the time to understand their needs to make the best connections in the industry.\r\n\r\nPeople Matter.\r\nPeople are at the center of our company. All decisions we make are in the best of interest of our employees, co-workers, communities, candidates and customers.\r\n\r\nHonesty Matters.\r\nWe conduct our business with integrity and DO the right things. We ARE trustworthy partners WHO stand behind our work and people.\r\n\r\nInnovation Matters.\r\nWe are disciplined in bringing forward new thought and solutions that guide the industry and grow our company. Continued growth secures sustainability that provides solid careers for our employees, stability for our STEM professionals, and reliability to our customers.\r\n\r\nRelationships Matter.\r\nWe take personal responsibility for all relationships with our employees, co-workers, STEM professionals and customers. Courtesy, dignity and respect EQUAL high performance results.\r\n\r\nEverything Matters.\r\nWe hold ourselves accountable to perform with the upmost of professionalism, attention to detail, and highest standard of service. We hit our targets and do what we say we will do.

Job Description Sanford Burnham Prebys is much more than a research facility and hub for innovation; it’s a vibrant global community of talented scientists and researchers from over 30 countries. This worldwide representation enriches our perspectives and enhances our creative approach to solving complex scientific challenges. We strive to be leaders not only in biomedical research but also in creating an environment where excellence thrives through collaboration across cultures and backgrounds. Our mission is to advance the biomedical sciences by cultivating the next generation of scientific leaders, providing meaningful opportunities for researchers of all backgrounds to learn, innovate, and make breakthrough discoveries that improve human health. Together, we translate science into health. The duties and responsibilities contained in the job description are intended to be examples of the accountabilities for which the person in the position will demonstrate competency through performance. The job description is not intended to be an all-inclusive list. Duties and responsibilities are subject to change and other duties may be assigned as necessary in accordance with institutional needs and applicable law. Position Summary: Under the supervision of the HRIS Manager, the HR Operations & Onboarding Coordinator supports the HRIS function in maintaining accurate employee data, reporting, and system operations, while also partnering with Talent Acquisition to deliver a smooth and engaging onboarding and orientation experience. This role is highly detail-oriented and plays a critical part in ensuring data integrity, compliance, and a positive new hire experience. This role is administrative and transactional in nature and is responsible for executing established HRIS and onboarding procedures under supervision. Duties and Responsibilities: HRIS Support & Data Management • Support the HRIS Manager with day-to-day system administration and data entry in accordance with established procedures and role-based access controls, • Accurately input, update, and maintain employee records in the HRIS, • Assist with generating standardized and predefined HR reports (e.g., headcount, turnover, onboarding metrics), • Perform routine audits to ensure data accuracy and completeness and escalate discrepancies as appropriate, • Help troubleshoot basic HRIS issues and escalate complex problems as needed, • Partner with internal partners (IT, Facilities, Payroll, International Services, and HR) to coordinate onboarding and orientation activities for new hires, • Serve as a point of contact for new hires during their onboarding period to provide information and administrative support, • Accurately deliver and track post-onboarding documentation, • Prepare and distribute first-day/onboarding paperwork and system access details, • Initiate new hires in the HRIS and ensure all required data is entered correctly, • Schedule and provide new hire orientation sessions, • Maintain accurate employee records, including I-9 and other employment documentation, in accordance with institutional policy and retention requirements, • Support onboarding processes designed to comply with Institute policies and applicable employment regulations, • Support audit requests by providing accurate HRIS data and documentation as requested and under supervision, • Work closely with Information Services, Talent Acquisition, International Services, and hiring managers, • Enter new hires into GLACIER & email notification to update GLACIER for extensions/changes as directed by International Services leadership, • Support process improvements across HRIS and onboarding workflows within assigned scope and under supervision Minimum Qualifications: Education: • High school diploma and three years’ relevant Human Resources or related office experience or an equivalent combination of education, training and/or experience from which comparable knowledge, skills and abilities have been attained., • 1–3 years of direct experience in HRIS support or onboarding coordination preferred, • Familiarity with HRIS platforms (e.g., Workday, ADP), • Strong attention to detail and data accuracy, • Non -profit previous experience preferred, • Experience with Microsoft Excel, HR reporting and data analysis involving standardized reports and data extraction, • Basic knowledge of employment laws and HR compliance Other Knowledge, Skills and/or Abilities: • Excellent organizational and communication skills, • Ability to handle sensitive information with confidentiality, • High attention to detail and data integrity Direct: no Indirect: no Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. When working on-site, the work environment is in a standard office setting. Frequently exposed to low to moderate noise, various odors, temperature changes, and equipment with moving parts, including but not limited to computers, phones, printers, and other standard office equipment. If working from home, you are responsible for ensuring a workspace that reasonably supports the performance of assigned duties, including a quiet, organized, and comfortable setting, free from significant noise or distractions. This role requires the use of standard home office equipment, including but not limited to computers and phones. As you may be exposed to minimal noise and temperature variations depending on your home setup, it's important to maintain a workspace that supports productivity and well-being. Reliable internet connection and a suitable workstation are essential to fulfill job responsibilities effectively. Physical Requirements: Ability to execute those physical activities required to perform the essential functions, including, but not limited to, regular sitting and being mobile; continual communicating both in person and on the telephone; regular keyboarding; regular reading of both print and digital material; and all other activities required to perform essential functions. Hybrid Eligible: Yes – subject to institutional policy and operational needs Compensation: The expected hiring rate for this position is $24 - $30/hour commensurate with experience. We welcome talented individuals of all backgrounds regardless of gender, sex, religion, race, national origin, citizenship, age, disability, perceived disability, pregnancy, pregnancy-related condition, reproductive health decisions, sexual orientation, gender identity, gender expression, genetic information, HIV/AIDS, marital status, covered veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. We are proud to be an equal employment opportunity employer. As part of this commitment, Sanford Burnham Prebys Medical Discovery Institute will ensure that persons with disabilities are provided reasonable accommodations for the hiring process. If a reasonable accommodation is needed, please contact our Benefits Team at (858) 646-3100 or via e-mail at

Type of Requisition: Pipeline Clearance Level Must Currently Possess: Secret Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: Professional Engineering Job Qualifications: Skills: PC Hardware, Server Hardware, Windows System Administration Certifications: None Experience: 1 + years of related experience US Citizenship Required: Yes Job Description: Launch your engineering career on the Navy's front lines as an Engineer Associate with GDIT. You'll support Naval Information Warfare Center Pacific (NIWC Pacific Codes 55131/55132/55133) delivering Consolidated Afloat Networks and Enterprise Services (CANES) and related tactical network capabilities across ashore, afloat, subsurface, airborne, mobile, and joint environments. You'll gain hands-on experience in labs and classified spaces-building, integrating, testing, and documenting mission networks that warfighters depend on. MEANINGFUL WORK AND PERSONAL IMPACT \n • Build, rack/stack, power, and cable lab systems; label, document, and validate connectivity (fiber/copper, VLANs, trunk/access).\n, • Install and baseline OS images (Windows/Linux) and virtual hosts/guests (VMware ESXi/Workstation); stand up small test topologies.\n, • Execute checklists for System Operational Verification Tests (SOVT) and Developmental Test & Evaluation (DT capture logs and test data.\n, • Run basic diagnostics (ping, traceroute, iperf, Wireshark); isolate Layer 1-3 issues and escalate with clear fault isolation notes.\n, • Apply vendor updates and security patches; assist with DISA Security Technical Implementation Guide (STIG) checklists and Assured Compliance Assessment Solution (ACAS) scans under senior guidance.\n, • Update engineering drawings (block/rack elevations), bills of material (BOM), cable running sheets, and "as-built" packages.\n, • Submit/track configuration items in CMPro; support change control (CCB), trouble reports, and asset accountability.\n, • Contribute to installation design package (IDP) inputs and site survey artifacts; support field events alongside senior engineers.\n, • Coordinate daily with NIWC engineers, program office staff, and Fleet users; produce concise status notes and technical minutes.\n\n WHAT YOU'LL NEED TO SUCCEED (Required): \n • \nSecurity Clearance: Active Secret clearance.\n, • \nExperience: 1 - 2 years with PC/server hardware, basic networking (TCP/IP, subnets, VLANs), and Windows/Linux administration; comfort working in racks with power/fiber/copper.\n, • \nSkills: Scripting fundamentals (PowerShell/Bash/Python), documentation discipline, and familiarity with ticket/change tools (Jira/ServiceNow).\n, • \nCertifications: DoD 8140/8570 IAT II baseline (e.g., Security+ CE) or ability to obtain within 90 days of hire.\n, • \nPhysical/Availability: Onsite in San Diego, CA; able to lift 40 lbs, work in lab/shipboard spaces, and support occasional CONUS/OCONUS travel.\n, • \nEducation: BS/BA in Electrical/Computer/Systems Engineering, Computer Science, Information Technology, or related field; equivalent military training/experience considered.\n, • \nWork Location: Onsite NIWC Pacific, San Diego, CA (labs/shipyards/fleet concentration areas). Limited CONUS/OCONUS travel as tasking requires; ability to work in classified labs and onboard ships/submarines/airborne ground sites.\n, • \nPosition Availability: Position is pending final contract award.\n, • US Citizenship Required\n\n WHAT WE'D LOVE FOR YOU TO HAVE (Desired): \n • CCNA or equivalent networking certification; Linux+/RHCSA; VMware VCP-DCV (associate level acceptable).\n, • Hands-on with VMware ESXi/NSX, Cisco IOS/NX-OS, GPON/QoS, and TACLANE/VPN basics.\n, • Exposure to CANES/ADNS or other Navy tactical networks; familiarity with RMF/eMASS artifacts, STIGs, ACAS/NESSUS.\n, • Experience with CM tools (CMPro), requirements/tools (DOORS), and diagramming (Visio/Cameo).\n, • COMSEC awareness and working knowledge of classified lab procedures/SCIF etiquette.\n, • ITIL Foundation and/or basic automation (Ansible) a plus.\n\n GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. \n • \nGrowth: AI-powered career tool that identifies career steps and learning opportunities\n, • \nSupport: An internal mobility team focused on helping you achieve your career goals\n, • \nRewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off\n, • \nCommunity: Award-winning culture of innovation and a military-friendly workplace\n\n OWN YOUR OPPORTUNITY Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. The likely salary range for this position is $72,877 - $98,599. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 10-25% T elecommuting Options: Onsite Work Location: USA CA San Diego Additional Work Locations: Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Job Description Overview The 50+ person growing studio is seeking a Senior Interior Designer with healthcare interiors experience to join their growing collaborative firm! Mid-size Los Angeles & San Diego Architecture + Interiors studio has received acclaim for its award-winning healthcare designs for clients including Kaiser Permanente, UCLA, UCI, and Children’s Hospital Los Angeles. Voted as one of the “Best Places to Work” for healthcare, designers and architects at this firm never leave! This is one of our first clients and candidates love it here. From landmark medical campuses to intimate imaging suites, the studio designs exceptional environments that promote healing while meeting the healthcare industry's planning, efficiency and technical demands. Their studio's architectural ingenuity, technical expertise, and attention to detail consistently place their projects at the forefront of cutting-edge design. (Note: Opportunity for fully remote available. Candidates residing in California are preferred, not required. Offices are based in Long Beach & San Diego) Role Overview * The Sr. Interior Designer will collaborate and coordinate with clients, Design Leaders, and project teams to bring innovative and creative design concepts and solutions to healthcare clients. * Demonstrate a thorough understanding of Interiors and Architectural building materials and finishes, specifications, current and applicable building and fire codes, design and detailing standards and construction techniques. Able to enrich design concepts through technical strategies and effectively uses appropriate tools to research, design and document at all project phases. * Demonstrates a thorough knowledge of Interior Design / Interior Architecture including design concept development, presentation techniques, design documentation, construction documentation, construction administration, and materials / finishes selection and specifications. The Sr Interior Designer is responsible for the design of a building's interior from start to finish. They typically work on projects from concept to completion, and their responsibilities include: Planning * Involved in the planning process from the beginning, including design elements and forms, ceiling design, and material and finish selection. They also consider space planning, and specialty light fixtures. Design Preparation * Senior interior designers prepare and develop drawings, models, images, and materials related to the design. They also research materials, products, and produce samples and visioning material. Project Management * Senior interior designers coordinate the design team, define project requirements and schedules. They also manage work progress and work closely with the design and project teams. Client Communication * Senior interior designers explain their ideas to their team and articulate why the concepts work, and then present them to the client. They also advise clients and ensure success in every aspect of their project. Skills that include: * Creativity and innovation in design solutions * Knowledge of building codes and regulations * Attention to detail and precision in design execution * Understanding of color theory and space planning Preferred candidates will have: * 7-10+ years of professional experience in healthcare interior design / architecture design is preferred * Bachelor’s Degree in Interior Design or Architecture or professional equivalent * Knowledge of building codes and HCAI * Experience leading design teams Delays may be experienced if uploading portfolio pdf. Do not exit out of page during upload. We look forward to receiving your application!

Olgoonik is an Equal Opportunity Employer Overview: The Shipper / Packer provides technical guidance to employees on the interpretation, application and modification of preservation, packaging and packing matters, to include processing criteria, procedures and techniques. Primary Responsibilities: • Resolves complex problems connected with preservation, packaging, and marking methods., • Blocks and braces a wide variety of military equipment and supplies., • Studies and analyzes the preservation, packaging, and packing program to assure program effectiveness., • Implement changes in packaging methods, requirements and procedures., • Establishes packaging standard operating procedures for the employees to follow., • Ensures that employees are provided with updates and changes to packaging regulations to include hazardous packaging requirements., • Reviews packaging discrepancies and recommends appropriate corrective actions., • Recommends methods of preservation when guidance is not readily available from data systems., • Researches technical, performance, environmental and cost data on packing materials., • Read specifications and photographs as/if required in DLA contract., • Participates in formal training in technical/certifiable aspects of packing and shipping hazardous material as required every two years., • Utilizes management policy, principles and practices to apply, interpret and implement packaging guidelines., • Knowledge of automated systems (e.g. DSS, HMIRS, FEDLOG, FLOS, JHCS, etc.)., • Applies conventional fact-finding, analytical and problem-solving methods and techniques to identify packing problems., • Analyze diverse and often vague data to determine trends, solve problems and recommend a course of action., • Keep abreast of and evaluate new developments pertaining to areas of responsibility to ensure that planning, approaches, findings and decisions will result in an efficient packaging/preservation process. Supervisory Responsibilities: • There are no supervisory responsibilities associated with the position. Education and/or Experience: • High School Diploma or GED required., • Minimum one (1) year specific experience in material handling, supply, distribution, inspection, or related areas., • One year using woodshop tools, fabricating containers, framing construction, or preservation, packing, and packaging., • One-year specific experience demonstrating ability to read blueprints, measure fabrication., • Experience identifying various materials for construction of wood containers. Knowledge, Skills, and Abilities: • Skill in operating materials handling equipment such as forklifts, tugs, stock selectors and other general-purpose equipment to move items to or from storage locations., • Proficient with Microsoft Suite products including Word, Excel, Access and Outlook software., • Demonstrate a good attitude and ability to work as a member of a team., • Ability to work effectively under a minimum of supervision., • Ability to multi-task efficiently, works in a fast-paced environment on multiple projects, and has a strong attention for detail. Certificates, Licenses, Registrations: • None Required. Security Clearance: • N/A Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs overhead and/or repetitively. Outside work in hot and cold or wet weather is occasionally required. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Number ICIMS-2025-9301 Job function QA&RA Job type Full-time Location Werfen - San Diego - AID - 9900 Old Grove Road San Diego, California 92131-1638 United States Country United States Shift 1st Introduction Werfen Werfen is a growing, family-owned, innovative company founded in 1966 in Barcelona, Spain. We are a worldwide leader in specialized diagnostics in the areas of Hemostasis, Acute Care Diagnostics, Transfusion, Autoimmunity, and Transplant. Through our Original Equipment Manufacturing (OEM) business line, we research, develop, and manufacture customized assays and biomaterials. We operate directly in 30 countries, and in more than 100 territories through distributors. Our Headquarters and Technology Centers are located in the US and Europe, and our workforce is more than 7,000 strong. Our success comes from a specific focus in these rapidly evolving diagnostic areas, our commitment to customers, and our dedication to innovation and quality. We're passionate about providing healthcare professionals the most valuable and complete solutions to improve hospital efficiency and enhance patient care. Overview Job Summary The Document Control Specialist III guides, executes, and improves Document Control processes including document changes, quality records control, labeling creation, SAP master data entry, and training record maintenance activities. This role ensures compliance with organizational standards and regulatory requirements and improves the efficiency and quality of Document Control processes. The Document Control Specialist III demonstrates subject matter expertise in document control processes and regulatory requirements. The position is responsible for carrying out activities and facilitating processing associated with change orders, SAP training sessions, quality plan tasks, document and record processing, metrics, artwork for labeling, and other tasks to achieve department objectives. The Document Control Specialist III works closely with department management and other Quality teams to ensure activities and tasks are accurately and efficiently completed and also works independently; uses professional judgement to make decisions with in areas of authority. Completes work in accordance with Inova Quality Management System. Responsibilities Key Accountabilities The main activities for this role include: • Document and Data Processing and Entry - Initiate and process change orders: review change orders verbiage and content for errors, inconsistencies, and incompleteness; confirm documents and records comply with standardized formats and file naming conventions; and affected items; confirm approvers are appropriate to the change; communicate proactively with stakeholders to ensure efficiency of change order processing; work with change owners and reviewers on required corrections and clarifications; monitor aging change orders and facilitate issues resolution in a timely manner; ensure completion of implementation actions prior to effective status of the change; and coordinate periodic review. Maintain signature and delegation records. Create and maintain SAP master data. Ensure physical controlled copies are maintained at point of use., • Document and Record Lifecycle Management- Optimize processes while performing creation, acceptance, review, storage, distribution, and archiving controlled documents and records from initiation through obsolescence and disposal., • Department Procedures - Create and revise document and record lifecycle management, training, and product labeling SOPs, work instructions, checklists, forms, and templates. Maintain accuracy and compliancy of procedures., • Process Improvement - Lead and implement Document Control department process improvements for accuracy, efficiency, effectiveness, and cycle times. Make process corrections based on process data trends. Represent Document Control in cross-functional projects., • Training & Support - SME for training in Document Control department activities and requirements. Develop, deliver and maintain training materials for document control practices to the organization. Train new team members to procedures. Assist in creation of training sessions, and follow-up on completion of training by users., • Metrics & Reporting - Maintain tracking data and reporting documents, labeling, and training metrics, reports, and dashboards. Analyze and respond to trends., • Product Labeling - Optimize processes while performing creation, review, maintenance, and archiving product labeling from initiation through obsolescence. Print restricted product labeling., • Quality Records Management - Optimize processes while performing scanning, filing, archival and disposal of paper and electronic quality records through required retain durations as well as processing quality records for off-site storage., • Audit Support - Support internal and external audits and regulatory inspections. At minimum, pull requested audit documents and records, respond to auditor queries, represent Document Control in audits and inspections., • Compliance - Follow applicable Werfen standard operating procedures (SOPs), national and international and other Quality System regulations, ISO standards, as well as applicable Environmental Health & Safety, Human Resources and all other regulatory and administrative policies.., • Perform other duties and responsibilities as assigned. Networking/Key relationships • Quality Teams, • Regulatory Teams, • Manufacturing Teams, • Operations Teams, • Marketing Teams, • Supply Chain Teams, • Legal & Human Resources Minimum Knowledge & Experience required for the position: Education: Bachelor's degree in a relevant field (e.g., Life Sciences) or equivalent experience required. • Advanced knowledge of document lifecycle management and maintaining documents within quality system requirements., • Advanced knowledge of Quality Management System regulations ISO 13485, and related standards as pertain to document, quality record, training records, labeling artwork control., • Advanced experience in drafting, updating, and implementing SOPs, work instructions, forms, templates, and other QMS controlled documents., • Advanced experience in document control configuration and document lifecycle management within a regulated quality management system., • Advanced experience with SAP for document control and material master management., • Experience leading departmental projects as well as providing representation in interdepartmental projects., • Experience with quality-related training systems., • Experience with computerized information systems (e.g., ERP, eDMS, LMS) required. Skills & Capabilities: • Attention to Detail & Accuracy: Thorough attention to detail and commitment to accuracy; ensures completeness and precision in documentation., • Organization & Time Management: Proficient organizational skills with the ability to manage multiple priorities and meet deadlines in a fast-paced environment., • Communication: Proficient written and verbal communication skills in English; able to effectively communicate and train on document control requirements and processes., • Collaboration & Interpersonal Skills: Advanced interpersonal skills for cross-functional collaboration; able to influence and negotiate to achieve optimal outcomes., • Customer Service Orientation: Responds promptly to requests and drives stakeholder satisfaction., • Process Improvement: Ability to analyze current processes, identify gaps, and implement effective solutions., • Adaptability: Ability to support changing business needs and work effectively in dynamic environments., • Problem-Solving: Proficient in identifying and resolving complex issues and problems; seeks help and guidance for cross-functional issues and problems. Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to communicate. Must be able to detect, identify and inspect scientific data. The employee will be required to stand and/or walk up to 8 hours per day and/or sit for up to 8 hours per day. Must be able to use hands to feel objects, including keyboard, telephone and pipettes or other lab equipment. May need to reach with hands and arms, climb stairs, balance, stoop, kneel or crouch. Will be required to talk and hear and have specific vision abilities, including close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. May occasionally have to lift and/or move up to 25 pounds. The noise level in the work environment will vary but is usually moderate. This position is very active and requires varying levels of mobility. The annual base salary range for this role is currently $24.00 range to $34.00 range. Individual employee compensation will ultimately depend on factors including education, relevant experience, skillset, knowledge, and particular business needs. This role is eligible for medical, dental, and vision insurance, 401k plan retirement benefits with an employer match, as well as paid vacation and sick leave. Our sales roles are eligible for participation in a commission plan and our management, and select professional roles, are eligible for a performance-based bonus. If you are interested in constantly learning and being challenged on a daily basis we encourage you to submit your resume or CV. Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen strictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact for assistance. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team. If you are interested in constantly learning and being challenged on a daily basis we encourage you to submi Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen s trictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact for assistance.t your resume or CV. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team.

Olgoonik is an Equal Opportunity Employer Overview: Perform full range of duties in the receipt, stowing, kitting, and issuing of material. Ensure items being stowed or shipped meet requirements of MIL-STD 129N. Must use anti-static devices. Provide first article inspection, if required, as depot contract agreement. Comply and input Distribution Standard System (DSS) data, count, sort, weigh incoming articles to verify receipt of items on requisition or invoice. Primary Responsibilities: • Identifies, examines, classifies, accepts, rejects, and disposes of material as per DLA regulations. Examinations may be visual or require measuring devices., • Loads material on and off skids, pallets, and stands., • Prepares labels as required., • Fills Materiel Request Orders (MROs) on a timely basis., • Prepares various reports relating to distribution., • Operates tools and equipment in performance of duties., • Receives data from, and input data to, DSS and other automated systems., • Operates MHE as assigned and hold appropriate license., • Counts, weighs, records data, applies tags and labels., • Makes preventive maintenance adjustments to equipment., • Ensures integrity of tools and equipment inventory., • Performs all other duties as assigned. Supervisory Responsibilities: • N/A Education and/or Experience: • High school diploma or GED required., • Two plus years of college or technical school highly desirable. (May substitute experience for education on a year-by-year basis)., • Minimum one-year general experience., • Minimum of one-year specific experience in material handling, supply, distribution, inspection, Quality Assurance (QA), or related area. Knowledge, Skills, and Abilities: • Must possess knowledge of inspection/examination procedures for material., • Must possess knowledge of research techniques for unmarked/defective material requiring identification., • Must be able to read contractual specifications, drawings, prints, schematics, and photographs., • Must be proficient with Microsoft Suite products including, Word, Excel, Access and E-mail business software., • Must demonstrate a good attitude and ability to work as a member of a Team., • Position requires self-motivation and the ability to work effectively under a minimum of supervision., • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects and have a strong attention for detail. Certificates, Licenses, Registrations: • None Required. Security Clearance: • N/A Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: General office environment. Travel may be required based on business demands. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Olgoonik is an Equal Opportunity Employer Overview: Contingent upon contract award. The Woodworker Lead is responsible for overseeing a team of woodworkers and ensuring all carpentry, crating, and packaging functions are performed safely, accurately, and in accordance with Defense Logistics Agency (DLA) Distribution contract requirements. This position plays a key role in supporting day-to-day operations by constructing, repairing, and modifying wooden containers and related products for military and government supply chain operations. Primary Responsibilities • Lead, train, and mentor woodworkers to meet performance standards and deadlines., • Assign daily tasks and monitor progress to ensure compliance with workload requirements., • Construct and repair items such as boxes, crates, pallets, and storage bins from wood and wood substitutes, using specifications, patterns, templates, and hand/power tools., • Build custom crates around equipment and material as required to support shipping and storage., • Repair defective containers by replacing damaged parts, inserting bracing, or adding protective fillers such as felt pads or cardboard., • Apply preservatives, sealants, and markings to containers in accordance with military standards (MIL-STD-129 and other applicable guidance)., • Operate hand tools, pneumatic tools, nail guns, and saws safely and effectively., • Ensure all work meets quality, safety, and contract compliance requirements., • Use Warehouse Management System (WMS) and other Government Data Systems to document, track, and process work actions., • High school diploma or equivalent., • Three (3) years of woodworker/carpenter experience, including crate building and repair., • At least one (1) year in a lead, supervisor, or team-lead role., • Knowledge of carpentry methods, hand tools, power tools, and pneumatic nailers., • Ability to read and interpret technical drawings, specifications, and work instructions., • Familiarity with DLA Distribution standards, including MIL-STD-129 marking and packing requirements., • Proficiency in using Warehouse Management Systems (WMS) or similar automated systems., • Strong leadership, communication, and organizational skills., • Must be able to lift up to 50 lbs and work in a warehouse environment., • Prior experience working under DLA Distribution contracts or in a DoD logistics environment., • Knowledge of Packaging, Preservation, and Packing (PPP&M) standards. This position is located in a warehouse environment. Work may require standing, bending, lifting, and operating tools and machinery. Safety gear (steel-toe boots, safety glasses, gloves, etc.) must be worn as required. Work Environment: General warehouse environment. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins works with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. Eurofins believes it is a global leader in food, environmental, pharmaceutical and cosmetics products testing and in agroscience CRO services. It is also one of the global independent market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, CDMO, advanced material sciences and in the support of clinical studies. In over just 30 years, Eurofins has grown from one laboratory in Nantes, France to over 50,000 staff across a network of more than 900 independent companies in over 50 countries and operating more than 800 laboratories. Eurofins offers a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products, as well as providing innovative clinical diagnostic testing services, as one of the leading global emerging players in specialized clinical diagnostics testing. In 2021, Eurofins generated total revenues of EUR € 6.7 billion, and has been among the best performing stocks in Europe over the past 20 years. We're looking for a strong business developer with experience in the drug discovery space to join our team! As a Business Development Manager overseeing key accounts, here's what you'll do: • Will be responsible for sales of Eurofins Discovery full portfolio comprised of chemistry, pharmacology, both products and services within assigned key accounts by maintaining current business, expanding to new therapeutic areas and gaining new revenue from other portfolio offerings., • Maintain a proficient understanding of the drug discovery process and selling the portfolio to the US client base., • Prospect within key accounts for the client persona that requires services or products for use in drug discovery., • Build client relationships through use of strategic selling skills and various collaborative approaches with frequent client visits and business reviews., • Provide recommendations and feedback for operational strategy needed to meet client requirements., • Develop key account business plans to grow account-by-account on a strategic basis and monitor against the goals of the plan on quarterly basis. This includes developing KPIs for accounts to demonstrate success in growing the portfolio of business. Pivoting the plan based on changes in customer need as pertinent and working closely with the operational sites within Eurofins Discovery to adopt to customer requirements., • Report on and strategize on competitor activities observed in the region/ globally., • Provide monthly reports against key metrics as defined., • Develop collaborative relationships with Sr. Leaders of the Eurofins Discovery companies in order to support their business and gain knowledge from them about the business., • Work closely with Eurofins sales teams that have relationships with the strategic account in other regions around the globe to effectively implement the account strategy., • Work closely and collaboratively with Marketing to design and implement territory and regional strategies to promote the portfolio and the Eurofins Discovery brand., • Utilize sales and marketing channels effectively including web site, ecommerce, marketplaces and participate effectively and proactively in customer events such as webinars, tradeshows and customer site events., • Travel approximately 30-50% of the time. What we are looking for: • 5+ years’ of experience in field sales with strong understanding of drug discovery and in particular discovery chemistry., • Experience developing and managing large key accounts typically pharma and biotech., • A minimum education of a B.S. chemistry or pharmacology or related discipline and 5 years of sales experience in selling products and services for drug discovery. Excellent knowledge of the pharmaceutical drug discovery and development process, preferably but not necessary to have worked in drug discovery., • Understanding and prior experience in the CRO market and proven ability to analyze and act on the global business trends to drive regional business development activities., • Strong presentation skills. Collaborative nature to work with multiple internal stakeholders., • Ability to endure normal travel to customer sites via mass transportation, personal car, and air travel., • Ability to travel internationally to major regions around the globe with limited restrictions (sales meetings, customer visits, training and customer audits) Salary Range: $125,000 - $150,000/yr. The position is full-time, Monday-Friday, 8 a.m.- 5 p.m., with overtime as needed. • Excellent full time benefits including comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match

Job Description JOB TITLE: SALES ASSOCIATE/MATERIAL HANDLER DEPARTMENT: RETAIL STATUS: PART - TIME IMMEDIATE SUPERVISOR: STORE MANAGER THE SALVATION ARMY MISSION STATEMENT: The Salvation Army, an international movement, is an evangelical part of the universal Christian Church. Its message is based on the Bible. Its ministry is motivated by the love of God. Its mission is to preach the Gospel of Jesus Christ and to meet human needs in His name without discrimination. QUALIFICATIONS: • High School graduate or equivalent, • Must be able to operate POS/Cash Register, • Must pass background check, which will include Criminal History and Sex Offender Registry., • Ability to communicate effectively with management, fellow store employees, customers and donors. PHYSICAL REQUIREMENTS: • Ability to sit, walk, stand, bend, squat, climb, kneel, and twist on an intermittent or continuous basis., • Ability to grasp, push, pull objects such as files, file cabinet drawers, clothing carts, merchandise carts, rolling clothing racks, fixtures, furniture dollies, platform trucks and carts, hand trucks and miscellaneous carts., • Ability to operate a telephone, • Ability to lift up to 50 lbs., • Ability to perform various repetitive motion tasks ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Ensure Customer/Donor needs are met by greeting all Customers and Donors and giving prompt, courteous assistance., 2. Stock priced items ready to be merchandised on the sales floor in accordance with Salvation Army Standards., 4. Assist in the maintenance of the store to keep it clean, neat and organized. Perform cleaning duties as assigned by Store Manager, Assistant Manager, Shift Supervisor and District Sales Manager. • Cleaning Windows, • Dusting, • Cashwrap Area, • Fitting Rooms, • Bathrooms, • Stockroom and Breakroom, • Sweeping and Mopping, • Donation Area, • Maintains assigned department within the store per TSA Merchandising Standards. 5. Follow all POS/Cash Register Policies in accordance with TSA Policies and Procedures., 6. Maintain safety standards and report any hazards/problems to the managers., 7. Follow all HR policies and procedures., 8. Attend required Monthly Store Meetings., 9. Follows all Dress Code Policy in accordance with the TSA Policies and Procedures., 11. Maintain and clean up the area in and around the donation trailer/pod at the beginning and end of each shift., 12. Courteously assist the donor in the removal of all donated items from the donor’s vehicle and provide receipt., 13. Separate and sort all donated material into the proper containers, and properly stack material as instructed by the Store Manager., 14. Perform other written or verbal duties as may be assigned by the Store Manager, Assistant Manager, Shift Supervisor and District Sales Manager and Command Administration.

Job Description Who we are: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a Technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Fuse Integration is seeking a Material and Inventory Handler to join our team in San Diego! You will be responsible for performing a combination of duties involved in receiving, storing, shipping, and issuing equipment, materials, and supplies in our Production Laboratory, System Integration Laboratory and Warehouse. The successful candidate will be able to track, log, verify, and compile various reports for received material, and examine stock to verify conformance to specifications and invoices. If you have Material Handling experience, Microsoft Office experience, the ability to learn quickly, multi-task, and work in a fast-paced environment, then contact us to get more information about this opportunity. Duties and Responsibilities: • Perform receiving and material movement function including:, • Receives purchased and completed manufactured items, verifies identification codes and quantities, • Inspect incoming goods for compliance with Purchase Orders, • Make entries on inspection paperwork and in business system software, • Communicate results of inspections and assist in facilitation of corrective actions, • Prepares and attaches a variety of property identification markers, • Records incoming and outgoing inventory and/or material in the appropriate computer system(s) or hard copy record(s), • Maintains control and inventory of production components and government property, • Restocks inventory to assure it is at the appropriate level. Documents and restocks returned inventory. Identify, report, and investigate inventory shortages, overages, or discrepancies, • Fulfills standard and immediate inventory requests and kits manufacturing rquests, • Packages, labels, and documents items for shipping, • Inputs data to maintain configuration management compliance with various computer software systems, • High school diploma and two or more years of experience in a shipping/receiving and inventory control environment. Additional education may be substituted in lieu of work experience, • Familiar with using office and specialized inventory/stock control software to track and record inventory levels and prepare requested reports and information and must be able to work extended hours as required, • Experience with material handling equipment, • Material Handling Equipment Certifications highly desired More about Fuse: Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements—providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Salary Range: $21/hr - $26/hr Benefits • Medical, Dental, and Vision, • Covered for employee, and a portion of dependents' coverage is covered as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job DescriptionDescription: Material Coordinator – Lathe 6721 Cobra Way, San Diego, CA, United States Full-time Company Description Welcome to CoreDux USA, a leading innovator in the machining industry located in the vibrant Sorrento Valley area of San Diego. As a rapidly growing company, we specialize in providing high-precision machining solutions that cater to a wide array of industries, including aerospace, automotive, medical devices, and consumer electronics. Our commitment to quality and excellence has earned us a reputation for delivering exceptional products and services to our clients. At CoreDux USA, we pride ourselves on our state-of-the-art facility, equipped with cutting-edge technology and advanced machinery, enabling us to meet the most demanding project requirements with unparalleled accuracy and efficiency. Our team of skilled professionals is dedicated to pushing the boundaries of innovation and delivering results that exceed expectations. As we continue to expand our operations, we are looking for talented and motivated individuals to join our team. We offer a dynamic work environment that fosters professional growth, collaboration, and creativity. If you’re passionate and eager to be part of a company that values innovation and excellence, CoreDux USA is the perfect place for you. Join us on our exciting journey and contribute to shaping the future of the machining industry! “At this time, we are unable to sponsor applicants for employment authorization. All candidates must be legally authorized to work in the United States without current or future need for employer sponsorship.” Job Description Material Coordinator – Lathe Reporting To CNC Lathe Supervisor Department Production Salary $21 – $29 per hour (DOE) Role Objective We are seeking a reliable Material Coordinator – Lathe to support the Lathe department by managing the flow of raw material, work-in-process (WIP), and job kits in and out of the lathe cell. This role keeps the machines running by ensuring the right material, tooling, and paperwork are at the right machine at the right time. Key Responsibilities · Pull and stage raw bar stock, billets, and material kits for lathe jobs based on production schedule. · Prepare and deliver job kits to lathe operators including drawings, routers, setup sheets, and tooling. · Move work-in-process parts between lathe operations, inspection, and downstream departments. · Maintain accurate real-time visibility of material status and location in the lathe area. · Update ERP/MRP system with material moves, issues, and operation completions. · Coordinate with Purchasing and the Material Control team to flag material shortages before they impact production. · Support the Lathe Supervisor in production scheduling by tracking material availability and job readiness. · Maintain cleanliness, organization, and 5S standards in the lathe area and staging zones. · Assist with cycle counts, audits, and inventory accuracy initiatives. · Follow all AS9100 requirements for material identification, segregation, and traceability. Qualifications · High school diploma or GED. · 2+ years of material handling, inventory control, or production coordination experience in a manufacturing environment. · Familiarity with ERP/MRP systems (SAP, Oracle, Epicor, NetSuite, or similar). · Basic understanding of machining operations, raw material types, and cut-to-length requirements. · Ability to read and follow written work instructions, routers, and drawings. · Basic computer skills including Microsoft Excel and email. · Strong organizational and communication skills. · Ability to read, write, and communicate in English. Additional Information Preferred Skills · Prior experience supporting CNC lathe or machining operations. · Prior experience in AS9100 or ISO 9001 certified environments. · Forklift and/or pallet jack certification. · Familiarity with bar feeders, bar pullers, and bar stock handling. Physical Requirements · Ability to lift up to 50 pounds. · Ability to stand for long periods and move between different workstations. · Ability to wear required PPE for extended periods. · Ability to work in a shop environment with exposure to noise, heat, and other manufacturing conditions. All your information will be kept confidential according to EEO guidelines. Diversity, Equity, and Inclusion (DE&I) Statement At CoreDux USA, we are committed to fostering a diverse, equitable, and inclusive workplace. We believe that diversity in our workforce enhances creativity, innovation, and problem-solving. We strive to create an environment where every employee feels valued, respected, and empowered to bring their authentic selves to work. Equal Employment Opportunity (EEO) Statement CoreDux USA is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, breastfeeding, and related medical conditions), gender, gender identity, gender expression, sexual orientation, marital status, national origin, ancestry, citizenship status, age, physical or mental disability, medical condition, genetic information, military or veteran status, or any other characteristic protected by applicable federal, state, or local laws. We are dedicated to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. Benefits: · 401(k) · Dental insurance · Employee assistance program · Flexible spending account · Health insurance · Health savings account · Life insurance · Vision insurance · Long Term Disability Benefits · Short Term Disability Benefits · Paid Time Off · Birthday Lunches · Company Paid Holidays · School Visitation Leave · Leave for Organ / Bone Marrow Donor Recruiters and Staffing Agencies Thank you for your interest in our job opening, but we are not engaging recruiters for this position and will not respond to recruiter / agency inquiries. Requirements:

Prototype Engineering Technician Pay: $25.00-$29.00/hour Location: San Diego, CA (Onsite) Duration: 12-Month Contract Schedule: Standard Working Hours Job Responsibilities In this role, you will support prototyping activities within a collaborative manufacturing environment. The position works closely with engineering teams to assist with product development initiatives and the fabrication of prototype components. Key responsibilities include: • Supporting prototype builds in collaboration with Product Development Engineering., • Assisting with fixture setup, fabrication, and prototype assembly., • Producing components using machining, rapid prototyping, and fabrication equipment., • Creating and modifying 3D models using CAD software to support prototype development., • Supporting cross-functional teams in engineering and manufacturing activities related to product prototyping. Essential Duties and Job Functions • Work with engineers to set up and fabricate prototype fixtures and components., • Operate traditional and CNC machine shop equipment including mills and lathes., • Produce prototype parts using rapid prototyping equipment such as:, • 3D printers, • Laser cutters, • Other fabrication tools, • Interpret engineering drawings, prints, and schematics to fabricate parts accurately., • Perform fabrication and assembly of mechanical, electronic, and electro-mechanical components., • Utilize CAD software (e.g., SolidWorks) to design or modify solid models for manufacturing., • Use measurement tools such as calipers, micrometers, and height gauges to verify dimensions., • Follow established machine shop policies, procedures, and safety standards., • Maintain compliance with safety protocols, including the use of proper PPE., • Utilize common hand and power tools during prototype fabrication and assembly. Knowledge & Skills • Strong mechanical aptitude and troubleshooting abilities., • Basic mechanical fixture and/or electro-mechanical design experience., • Ability to read and interpret technical drawings and schematics., • Familiarity with machine shop environments and equipment., • Experience with measurement and inspection tools., • Ability to work effectively in a fast-paced and dynamic environment., • Experience with rapid prototyping equipment such as 3D printers and laser cutters., • Proficiency with Microsoft Office applications., • Strong attention to detail and commitment to safety practices. Education & Experience Required: • 1-3 years of machine shop experience using traditional equipment such as:, • Conventional lathes, • Mills, • CNC milling machines, • Experience with fabrication and assembly of mechanical or electro-mechanical components., • Experience using hand tools and power tools in a manufacturing environment. Preferred / Nice to Have: • Associate's degree or relevant technical training., • Experience maintaining tools and managing material inventory., • Familiarity with optical measurement equipment (e.g., Keyence systems)., • Industry certification or trade school training in a related field., • Knowledge of 3D CAD software (SolidWorks and/or Fusion 360 preferred)., • Ability to lift up to 30 lbs., • Willingness to take on additional responsibilities and assignments as needed.

Job Description JOB TITLE: SALES ASSOCIATE/MATERIAL HANDLER DEPARTMENT: RETAIL STATUS: PART - TIME IMMEDIATE SUPERVISOR: STORE MANAGER THE SALVATION ARMY MISSION STATEMENT: The Salvation Army, an international movement, is an evangelical part of the universal Christian Church. Its message is based on the Bible. Its ministry is motivated by the love of God. Its mission is to preach the Gospel of Jesus Christ and to meet human needs in His name without discrimination. QUALIFICATIONS: • High School graduate or equivalent, • Must be able to operate POS/Cash Register, • Must pass background check, which will include Criminal History and Sex Offender Registry., • Ability to communicate effectively with management, fellow store employees, customers and donors. PHYSICAL REQUIREMENTS: • Ability to sit, walk, stand, bend, squat, climb, kneel, and twist on an intermittent or continuous basis., • Ability to grasp, push, pull objects such as files, file cabinet drawers, clothing carts, merchandise carts, rolling clothing racks, fixtures, furniture dollies, platform trucks and carts, hand trucks and miscellaneous carts., • Ability to operate a telephone, • Ability to lift up to 50 lbs., • Ability to perform various repetitive motion tasks ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Ensure Customer/Donor needs are met by greeting all Customers and Donors and giving prompt, courteous assistance., 2. Stock priced items ready to be merchandised on the sales floor in accordance with Salvation Army Standards., 4. Assist in the maintenance of the store to keep it clean, neat and organized. Perform cleaning duties as assigned by Store Manager, Assistant Manager, Shift Supervisor and District Sales Manager. • Cleaning Windows, • Dusting, • Cashwrap Area, • Fitting Rooms, • Bathrooms, • Stockroom and Breakroom, • Sweeping and Mopping, • Donation Area, • Maintains assigned department within the store per TSA Merchandising Standards. 5. Follow all POS/Cash Register Policies in accordance with TSA Policies and Procedures., 6. Maintain safety standards and report any hazards/problems to the managers., 7. Follow all HR policies and procedures., 8. Attend required Monthly Store Meetings., 9. Follows all Dress Code Policy in accordance with the TSA Policies and Procedures., 11. Maintain and clean up the area in and around the donation trailer/pod at the beginning and end of each shift., 12. Courteously assist the donor in the removal of all donated items from the donor’s vehicle and provide receipt., 13. Separate and sort all donated material into the proper containers, and properly stack material as instructed by the Store Manager., 14. Perform other written or verbal duties as may be assigned by the Store Manager, Assistant Manager, Shift Supervisor and District Sales Manager and Command Administration.

Job Description Job duties: * Unloads, receives and puts away incoming product, goods, tools and/or equipment; unpacks bales, crates, and other containers; checks for damage and for discrepancies between goods and invoices. * Accurately sorts, labels, moves and stores items; places material or items on racks, shelves, or in bins according to predetermined sequence such as size, style, or product codes; arranges storage to optimize crib space. * Inspects and measures tools/equipment for defects, wear and tear and reports damage or wear to supervisors. * Prepares periodic inventory or maintains perpetual inventory of supplies and equipment. * Delivers tools or equipment to associate work locations. Skills Required: Must have over 3 months of experience, High School Diploma or equivalent ( Not Required) • Loading, unloading, picking, packing or moving goods in a warehouse environment; forklift / cherry picker experience preferred., • Demonstrated ability to read and interpret documents such as safety rules, work orders, operating and maintenance instructions, and procedure manuals., • Basic computer knowledge and proficiency and/or a demonstrated technical aptitude to learn; preferred technical skills to include but not limited to MS-Office products, Vista, Control, SX.e, Prophet 21., • Demonstration of basic mathematical skills (add, subtract, multiply and divide in all units to measure, using whole numbers, common fractions, and decimals); ability to compute rate, ratio, and percent preferred., • Strong communication and customer service skills., • Ability to work in a team environment and be self-motivated to accomplish assigned tasks and goals., • Material Handler Experience, • Loading and Unloading Vehicles, • Maintenance and Repair Skills, • Inventory Management & Control, • Basic Computer Skills

Job Description POSITION DESCRIPTION Reports to: Program Manager Supervises: N/A POSITION STATUS: Full-time ESSENTIAL AREA OF RESPONSIBILITY: All areas of responsibility listed below are essential to the satisfactory performance of this position, with reasonable accommodation, if necessary. Work responsibilities may vary, depending upon the assignment. GENERAL FUNCTIONS The contractor shall directly support the Material Management Department and the Directorate for Administration at NMCSD by providing support including, but not limited to Duties / Responsibilities Include, but not limited to the following * Process internal customer orders, stock, and re-supply medical logistics items. This will include removing all outdated or expired items from shelves. * Provide forward logistics support to Material Operations personnel as needed with the established computerized internal supply system. This includes assisting with the delivery of supplies, equipment, or furniture to customer accounts within the medical treatment facility, to include outlying buildings attached to the organization. * Provide operation of the computer system for filling carousel bins and supply lockers. Customer service may be required when filling lockers throughout the hospital complex. * Will answer phone calls via the 24-hour hotline to answer supply questions regarding the General Stores operations and provide professional and timely customer service to end users. * Will work on weekends, holidays, or any shift, since the General Stores area operates 24 hours a day, 7 days a week. * Inventories supply carts located in clinics and wards throughout the hospital through the use of a hand-held device. * Downloads data from computer and generates picklist. * Identifies and selects items for issue from a carousel and loads supply items onto transport lockers for the restocking of PAR carts. * Prepares lockers for transport on Automated Guided Vehicles (AGVs) for distribution. * Receives supply lockers from AGVs, unloads lockers into PAR carts, and inventory with replenishment. WORKING CONDITIONS * Perform occasional travel to contractor and customer sites, as required * Work is performed indoors with some potential risks to safety and health hazards related to electronics in a medical environment. * Work flexible hours, including occasional overtime QUALIFICATIONS * Knowledge of governing supply regulations, procedures, and instructions. * Knowledge of supply functions, operations, program requirements, and work methods. * Knowledge of warehousing methods, procedures, material handling techniques, and activities such as material receiving, issuing, and preservation. * Ability to use automated processing equipment and systems such as optical readers and scanners. * Ability to read, interpret, and apply reference material such as regulations, manuals, catalogs, records, orders, etc. to accomplish and resolve problems. * Ability to read and speak the English language, correct grammar, spelling, punctuation, capitalization, and format to prepare and edit written correspondence, reports, and transcribed material. * Proficient with standard office equipment, such as computers, typewriters, copiers, fax machines, telephone systems, and office automation systems, to perform a substantial range of office support. * Demonstrate general medical ethics, telephone etiquette, excellent communication, and customer service skills. Education and Other Requirements * Must have a High School Diploma and the ability to learn new tasks. * Experience. A minimum of 6 months experience is required in the supply or warehouse setting. * Physical Requirements. Work is a combination of sedentary duties as well as light to moderate physical effort. * Requirements include walking, standing, reaching, bending, and moving items. May require lifting and carrying weight over 45 pounds. Works periodically on hard surfaces. Work Environment: • Work is performed indoors in an environment involving everyday risks or discomforts that require normal safety precautions. The area is adequately lighted, heated, and ventilated. Personnel assigned to this contract acquire and maintain all required training and certifications (as applicable). Clearance: Dental Insurance * Health Insurance * Paid Time Off Physical Skills and Abilities * May require lifting - up to 25 pounds * Requires visual acuity to use a keyboard Requirement • A criminal background check will be performed.

Job Description JOB TITLE: SALES ASSOCIATE/MATERIAL HANDLER DEPARTMENT: RETAIL STATUS: PART - TIME IMMEDIATE SUPERVISOR: STORE MANAGER THE SALVATION ARMY MISSION STATEMENT: The Salvation Army, an international movement, is an evangelical part of the universal Christian Church. Its message is based on the Bible. Its ministry is motivated by the love of God. Its mission is to preach the Gospel of Jesus Christ and to meet human needs in His name without discrimination. QUALIFICATIONS: • High School graduate or equivalent, • Must be able to operate POS/Cash Register, • Must pass background check, which will include Criminal History and Sex Offender Registry., • Ability to communicate effectively with management, fellow store employees, customers and donors. PHYSICAL REQUIREMENTS: • Ability to sit, walk, stand, bend, squat, climb, kneel, and twist on an intermittent or continuous basis., • Ability to grasp, push, pull objects such as files, file cabinet drawers, clothing carts, merchandise carts, rolling clothing racks, fixtures, furniture dollies, platform trucks and carts, hand trucks and miscellaneous carts., • Ability to operate a telephone, • Ability to lift up to 50 lbs., • Ability to perform various repetitive motion tasks ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Ensure Customer/Donor needs are met by greeting all Customers and Donors and giving prompt, courteous assistance., 2. Stock priced items ready to be merchandised on the sales floor in accordance with Salvation Army Standards., 4. Assist in the maintenance of the store to keep it clean, neat and organized. Perform cleaning duties as assigned by Store Manager, Assistant Manager, Shift Supervisor and District Sales Manager. • Cleaning Windows, • Dusting, • Cashwrap Area, • Fitting Rooms, • Bathrooms, • Stockroom and Breakroom, • Sweeping and Mopping, • Donation Area, • Maintains assigned department within the store per TSA Merchandising Standards. 5. Follow all POS/Cash Register Policies in accordance with TSA Policies and Procedures., 6. Maintain safety standards and report any hazards/problems to the managers., 7. Follow all HR policies and procedures., 8. Attend required Monthly Store Meetings., 9. Follows all Dress Code Policy in accordance with the TSA Policies and Procedures., 11. Maintain and clean up the area in and around the donation trailer/pod at the beginning and end of each shift., 12. Courteously assist the donor in the removal of all donated items from the donor’s vehicle and provide receipt., 13. Separate and sort all donated material into the proper containers, and properly stack material as instructed by the Store Manager., 14. Perform other written or verbal duties as may be assigned by the Store Manager, Assistant Manager, Shift Supervisor and District Sales Manager and Command Administration.

Job Description Overview: The Patriot Group is seeking dependable, safety-minded, and travel-ready Utility Material Handlers to support a national utility distributor on warehouse and material response assignments throughout the United States. This position is based out of San Diego, California, but the work supports nationwide deployments in warehouse and utility material handling environments. The ideal candidate will have forklift experience, strong warehouse awareness, and the ability to support fast-paced assignments involving material movement, inventory, truck loading/unloading, and order pulling/kitting. This is a hands-on role that may involve work in both indoor warehouse settings and outdoor operational environments, depending on the assignment. Responsibilities: • Operate forklifts safely and efficiently in warehouse and outdoor work environments, • Pull, stage, sort, and kit materials for warehouse release and field support, • Load and unload trucks with utility materials and related equipment, • Receive inbound shipments and verify counts, condition, and accuracy, • Support inventory control through cycle counts, stock checks, and material organization, • Maintain clean, organized, and safe warehouse and yard work areas, • Use scanners, tablets, or other tracking tools to support inventory and material movements, • Follow pick sheets, shipping documents, work instructions, and site procedures, • Work closely with supervisors and team members to meet assignment goals, • Support warehouse operations in both indoor and outdoor environments as needed, • Follow all customer, company, and site safety requirements, including PPE compliance, • Forklift experience required, • Valid REAL ID required for air travel, • Valid driver’s license required, • Ability and willingness to travel nationwide for temporary assignments, • Ability to work assignments with a typical Sunday departure and Saturday return, • Ability to work in both indoor and outdoor conditions, • Ability to lift, carry, move, and handle materials throughout the workday, • Ability to stand, walk, bend, stoop, and work in active warehouse settings for extended periods, • Warehouse experience, • Experience with inventory, cycle counts, stock handling, and order pulling, • Experience loading and unloading trucks in a warehouse, utility, or distribution setting, • Familiarity with scanners, warehouse systems, tablets, or inventory software, • High school diploma or equivalent, • Prior experience in emergency response, fire service, military, utility, or logistics preferred, • Valid driver’s license required, • Forklift and small equipment operation required, • Must be able to lift up to 50 lbs, • Ability to work outdoors and in extreme weather conditions, • Must be able to walk, stand, bend, and operate tools for extended periods, • Travel & Assignment Details, • Position is based out of San Diego, CA, • Work supports nationwide response assignments, • Assignments are generally 2 weeks minimum, • Travel is commonly outbound on Sundays and return on Saturdays, • Air travel is required, • Hotel lodging is arranged by the company We offer competitive wages, excellent benefits, and opportunities for growth and advancement within our company. If you are a motivated individual who enjoys hands-on work and being part of a dynamic team, we encourage you to apply for the position of Utility Laborer at The Patriot Group. Applicants for employment with Patriot Supply Unlimited, Inc dba The Patriot Group are considered without regard to race, color, religion, sex, age, sexual orientation, national origin, or any other factors prohibited by local, state, or federal law. We are proud to be an Equal Opportunity Employer. Applicants with disabilities may be entitled to reasonable accommodation under the ADA and related state laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing an undue hardship on the company. Please contact our personnel team if you need assistance completing any forms or to otherwise participate in the application process. This employment application does not create a contract or offer of employment. If hired, employment with the Company will be on an at-will basis and can be terminated at the will of either you or the Company. Please be advised, this application for employment is only good for 30 days from the date received by the Company. Consideration for employment after 30 days requires submission of a new application.

Job DescriptionDescription: This is a temporary, full-time position. Strong performers may be considered for permanent placement based on business need Shift: Monday- Friday, 6:00 AM - 2:30 PM SUMMARY The Material Handler III serves as a senior-level contributor within the Supply Chain team, responsible for the accurate handling, movement, and management of materials across the facility. This role leads by example in warehouse operations, mentors junior material handlers, and supports continuous improvement initiatives. In addition to performing stockroom functions including production order picking, inventory control, cycle counting, and material distribution, the Material Handler III takes an active role in resolving complex inventory discrepancies, coordinating with cross-functional teams, and supporting operational efficiency. This position requires a strong command of ERP systems, material traceability requirements, and lean manufacturing principles. ESSENTIAL JOB FUNCTIONS · Operate powered industrial equipment (forklift, pallet jack, company vehicle as authorized) to safely transport raw materials, finished goods, tooling, and supplies between warehouse and production work centers in compliance with all safety and regulatory requirements. · Serve as a senior resource for material flow coordination, staging tools, fixtures, and raw materials in alignment with the production schedule to minimize downtime and support on-time delivery. · Receive, verify, and document incoming shipments; load and unload trucks while ensuring material accuracy, condition, and traceability. Identify and escalate discrepancies or quality concerns. · Perform and review inventory transactions in the ERP system (IQMS) including material moves, receipts, issues, and adjustments; identify root causes of discrepancies and recommend corrective actions. · Store materials, pallets, and containers (including large gaylords) in designated rack locations in strict adherence to FIFO, lot control, and traceability requirements. · Maintain organized storage of CNC fixtures, thermoforming tools, and production support equipment; identify and address unsafe or non-compliant storage conditions. · Prepare, label, tag, and package materials for internal transfer or external shipment in accordance with customer and regulatory requirements, and verify accuracy of junior team members' work as assigned. · Lead and participate in warehouse 5S initiatives, waste management programs, and continuous improvement activities; serve as a subject matter resource for team-level process improvement efforts. · Assist Shipping and Receiving operations as needed; provide guidance to junior Material Handlers during peak periods or in the absence of supervisory coverage. · Comply with all safety policies, OSHA requirements, and company procedures; proactively identify and report hazards, near misses, and unsafe conditions. · Lead or assist with inventory cycle counts; analyze count results, identify root causes for variances, and support resolution to maintain inventory accuracy targets. · Perform routine equipment checks, log findings, and coordinate with maintenance on equipment issues to minimize operational disruptions. · Provide on-the-job training and guidance to Material Handler I and II employees on processes, systems, and safety expectations. · Support cross-departmental coordination with Production, Quality, and Purchasing on material availability, substitutions, and expedited requests. · Supports accounting and organizational objectives by completing related tasks and special projects as assigned. SUPERVISOR RESPONSIBILITIES The responsibilities of this role do not include supervising other employees. QUALIFICATIONS To succeed in this job, an individual must satisfactorily perform each essential job function. The requirements below represent the required knowledge, skill, and ability. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EDUCATION and EXPERIENCE • High school diploma or GED required; associate degree or vocational/technical certification in logistics, supply chain, or a related field preferred., • Six (6) or more years of experience in warehouse, stockroom, or inventory control positions., • Three (3) or more years of experience operating a forklift in a manufacturing or distribution environment., • Prior experience in a senior, lead, or training capacity within a warehouse or materials team preferred. CERTIFICATES, LICENSES, REGISTRATIONS • Current Forklift Operator certification or satisfactory completion of a company-approved forklift training program is required., • Possession of a valid driver's license and a good driving record. LANGUAGE REQUIREMENTS · Excellent verbal and written communication skills in English. · Conversational in any other language is a plus. MATHEMATICAL SKILLS • Proficient in basic arithmetic: addition, subtraction, multiplication, division, fractions, decimals, and percentages., • Ability to interpret packing slips, bill of materials, and inventory reports with numerical accuracy. JOB SKILLS • Intermediate proficiency in MS Office Suite and SharePoint., • Working knowledge of ERP systems; IQMS experience strongly preferred., • Advanced understanding of material handling processes including customer order fulfillment, inventory control and disposition, supply documentation, data and transactional management, material distribution and delivery, and cycle/physical counting., • Ability to train and guide others on material handling processes, ERP transactions, and safety expectations., • Experience with RF Gun operation; demonstrated ability to troubleshoot common RF scanning issues., • Solid understanding of Lean manufacturing principles; active participation in 5S and continuous improvement activities, with ability to lead team-level improvement tasks., • Demonstrated sound judgment in prioritization and decision-making within a fast-paced, ambiguous environment., • Strong written communication skills for completing forms, logs, cycle count documentation, and internal correspondence., • Reliable and flexible to work additional hours on short notice to complete orders or special projects in support of customer demands., • Ability to effectively communicate and collaborate across organizational levels, including Production, Quality, Supply Chain, and supervision. PHYSICAL DEMANDS As part of their job duties, the employee must be able to sit, stand, and walk throughout the day while frequently using their hands to handle objects and communicate verbally. Additionally, they may need to reach, stretch, push, pull, crouch, stoop, and occasionally lift objects weighing up to fifty (50) pounds. This role requires specific vision abilities, including close, distance, color, peripheral vision, depth perception, and the ability to adjust focus. According to ADA regulations, reasonable accommodation will be provided to ensure that individuals with disabilities can perform the job's essential functions. WORK ENVIRONMENT Manufacturing environment: A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Providien Thermoforming is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have . PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS · ASTM F–2412–2005, ANSI Z41–1999, or ANSI Z41–1991 rated safety toe shoes in specific areas. · Clear ANSI Z87.1 safety-rated glasses in specific areas. · Hearing protection in specific locations. · Ability to compile with JSA in specific areas. TRAVEL Approximately 5% of travel is expected. SALARY INFORMATION According to several states' laws, this position's salary range falls between $20 and $28 hourly/annually. However, this salary information is merely a general guideline. When extending an offer, Providien Thermoforming considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations. Requirements:

Job Description PAY RATE: $17.25 hour ABOUT THE ARC The Salvation Army (TSA) Adult Rehabilitation Center (ARC) is a no-fee program to assist men & women in their journey to complete our rehabilitation program. We are grateful for the contributions our valued employees make toward the maintenance and effectiveness of the programs. The organization is indebted to and dependent on the diligence and devotion of its employees. ABOUT OUR RETAIL TEAM Become part of the dedicated Retail Team at The Salvation Army! Together we can continue to serve and impact our local community, through the commitment to “Do The Most Good” at our Santee Thrift Store, which supports the Adult Rehabilitation Program. This is an opportunity to promote a positive shopping/donor experience, enhance customer service, problem-solving and teamwork skills, while contributing to the success of our Program and its participants. EMPLOYEE BENEFITS OFFERED • Opportunity for career growth, • Paid time off, • Employee Stores Discounts, • Great Work Perks Discounts (Amusement Parks, Museums, Services and more!), • Employee Referral Bonuses, • Medical, Dental, and Vision, • Health and fitness Fitbit Devise, • Retirement Plan, • Legal Advice MetLife, • Pet Insurance, • AFLAC, • Maintaining and cleaning up the area in and around the Donation trailer/pod at the beginning and end of each shift, • Assisting the donor in the receipt of donated items from the donor and provide receipt, • Maintaining all reports and paperwork as instructed by Supervisor, • Separating and sorting all donated material into the proper containers, and properly stack material as instructed by the Supervisor, • Assisting TSA PA/Drivers with loading donations on to trucks as necessary, • Informing the supervisor of needed items prior to running out (i.e.: brooms, receipts, totes, carts, etc.), • High School diploma/GED preferred, • Must pass background check, which will include Criminal History and Sex Offender Registry., • Ability to read and write and to understand and follow both written and verbal instructions, • Ability to sit, walk, stand, bend, squat, climb, kneel, and twist on an intermittent or continuous basis., • Ability to grasp, push, pull objects such as files, file cabinet drawers, clothing carts, merchandise carts, rolling clothing racks, fixtures, furniture dollies, platform trucks and carts, hand trucks and miscellaneous carts., • Ability to move product up to 75lbs., • Ability to perform various repetitive motion tasks. Our stores operate 7 days per week. Work schedules are determined by Management and employee must be flexible to always ensure adequate store coverage. Full-time associates may be scheduled to work any full-time shift including evenings, weekends, and holidays. COVID-19 Updates The Salvation Army will comply with all governmental orders and any contractual obligations relative to COVID-19 safety measures, including mandatory vaccination of staff, if required. The Salvation Army will consider requests for exemptions from any such requirements on either religious or medical grounds when available.

Job Description Join Our Team! At DSI, we have over 40 years of sales enablement and customized business solution experience, providing enhanced value that delivers results for our clients and partners. We're on the lookout for passionate individuals eager to make their mark in sales and customer service. Our exciting and rewarding work environment offers you the opportunity to grow with us and make a significant impact. Job Overview The Retail Support Specialist (RSS) delivers hands-on, frontline support to AT&T customers inside high-traffic national retail environments. In this role, you will engage directly with customers and retail partners to resolve account, billing, device, and service concerns; often in fast-paced, high-volume situations. Success in this role requires strong communication skills, emotional resilience, comfort with technology, and the ability to remain calm, accurate, and professional in a dynamic retail setting. Key Responsibilities: Customer Support • Provide professional, friendly, and solution-focused support to AT&T customers inside national retail locations., • Resolve inquiries related to billing, account updates, plan changes, device support, and service concerns., • Troubleshoot wireless devices, network issues, and feature functionality., • Act as the AT&T subject-matter expert for retail employees and third-party labor partners., • Serve as the primary AT&T representative for these partners, leading in-store support for retail escalations., • This role is performed in a retail environment and requires standing, walking, and engaging on the sales floor for up to 8 hours per day., • Ability to work flexible schedules, including evenings, weekends, and holidays, based on business needs., • Navigate multiple systems simultaneously while engaging with customers in real time., • Document all interactions thoroughly and accurately., • Adhere to company policies, compliance requirements, and privacy standards., • Meet or exceed performance metrics, including quality, efficiency, and customer satisfaction scores., • Execute and maintain approved planograms for mobile devices and signage, • Maintain inventory accuracy for display devices and fixtures, • Work closely with cross-functional teams such as technical support, billing, fraud, customer care, and escalation agents., • Share insights on recurring issues to improve processes and customer experience., • Maintain a positive, professional demeanor during all interactions. Requirements Required Skills & Qualifications • Strong customer service and communication skills., • Ability to handle high-stress or escalated situations with professionalism., • Proficient in multitasking and navigating complex systems., • Detail-oriented with strong problem-solving abilities., • Experience in wireless communications, retail customer service, or technical support, • Competitive starting pay of $26 per hour!, • Comprehensive training and development programs, • A supportive and engaging team environment, • Medical, Dental, Vision, and Life insurance are available on the first day of the month following your first day of employment – no extended waiting period!, • 401k Plan with employer matching after one year of employment, • Paid vacation, personal/sick days, and bereavement time after 90 days, • Employee Profit Sharing Program, • 50% AT&T wireless discount, • Paid training, • Advancement opportunities, we prefer to promote from within!

Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Required Who We Are General Dynamics NASSCO is one of three shipyards in the Marine Systems group of General Dynamics Corporation (NYSE: GD). General Dynamics NASSCO traces its beginnings to the industrial heart of San Diego, along the working waterfront of beautiful and historic San Diego Bay. The company has been designing and building ships in San Diego's industrial corridor since 1960 and is the largest full service shipyard on the West Coast of the United States Job Summary Operates a variety of diesel electric cranes, including portal, tower, mobile, mobile (auxiliary), overhead (cab), overhead (floor), to lift and move heavy objects and machinery. Responds to ground signals to rotate boom, alter angle of boom, reposition crane and raise and lowers load. Inspects crane for defective parts and performs routine maintenance and inspection procedures. Performs other related tasks as assigned, some of which may become essential to the position. Qualifications Standards Must have knowledge of mechanical and crane operation principles. NCCCO License to operate Mobile Hydraulic Crane (All Terrain) preferred. Crane Operator with extensive Rigging experience preferred. Must be able to comprehend ship nomenclature (decks, port, stbd, fwd, aft, frame number, compartment location, etc.) Must be able to coordinate hand, foot and eye movement. Basic knowledge and comprehension of weights and conversion (lbs, tons, kilograms) needed. Knowledge and comprehension of universal hand-signals for rigging and crane operations necessary with the ability to clearly communicate via hand-held radio. Must have the ability to work at heights, in confined spaces, and be available to work any shift. Must comprehend written and verbal instructions, hear warning signals and read and comprehend safety instructions, regulations and warnings. Essential Job Tasks \n • Operate diesel electric cranes, including portal, tower, mobile, mobile (auxiliary), overhead (cab), overhead (floor) cranes; rotate and alter boom angles in response to radio or hand signals to raise, lower and transfer loads. \n, • Set up machinery and equipment, including boom lengths and crib outriggers.\n, • Rig machinery and material in and out of ships.\n, • Provide data into log books relating to lifts.\n, • Read load charts and understand different types of load materials and landing areas. \n, • Inspect cranes for proper operation.\n, • Conduct pre and post-job inspections independently and/or with supervision.\n, • Perform minor crane maintenance, clean windows, and make basic repairs.\n, • Train and mentor others in essential rigging job functions and safe crane operations.\n, • Other job duties as assigned relevant to the trade.\n\n Materials, Tools, Equipment, Work Aids Basic hand and power tools, rigging tools, gloves, lubricating greases, oil, and cleaning solvents. Personal protective equipment required. Physical/Mental Involvement Repetitive or prolonged sitting, climbing, balancing, and lifting. Lifting body weight, sitting, reaching, handling, pushing/pulling, standing, walking, leaning and seeing (to maintain visual contact with load), eye/hand/foot coordination. Hearing warning signals, reading and comprehending safety instructions and planning sequence. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. Marginal Job Tasks Housekeeping in all work areas, including sweeping. May be required to attend safety, quality and/or process improvement meetings. Environmental Factors Exposure to wind, rain, ambient temperatures such as extreme heat and cold, wet and humid conditions, dust, and toxic/caustic chemicals. Works at heights of up to 120' on piers or barges. Exposed to high levels of constant noise. PAY SCALE $33.15 - $36.50 This pay range is a reasonable estimate of the hourly range for this role. It takes into account the wide range of factors considered in making compensation decisions; including but not limited to skill sets, experience, training, and education. General Dynamics NASSCO also provides a variety of benefits including medical & dental insurance coverage, 401(k) retirement savings plan, flexible spending accounts/HSAs, life and disability insurance, company paid holidays and paid time off (PTO), wellness coaching, and an onsite health services. General Dynamics NASSCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law. To learn more about applicant rights under federal law, click here: Know Your Rights: Workplace Discrimination is Illegal If you have a disability that impacts your ability to complete the job application process and would like to request an accommodation, please contact our Human Resources Department. Call (619) 544-8511 or email [email protected]. This contact information is for accommodation requests only, not to inquire about the status of applications. NASSCO is an Equal Opportunity / Individuals with Disabilities / Protected Veterans Employer

Surface Warfare Analyst, Mid The Opportunity: As an expert in defense missions, your unique background inspires you to think bigger, push further, and ask questions others don't. We need your extensive industry knowledge and advisory skills to solve some of our client's most complex problems and find solutions that keep our nation safe. As a Surface Warfare Analyst, you'll bring your full range of knowledge and experience in leadership, integration of shipboard systems, operational and tactical maritime warfare, command and control, maintenance and modernization, Navy training systems, installation management and managing people, policies , training, logistics, and shipboard material readiness to work alongside thought leaders in analytics and digital solutions to improve surface ship readiness. You'll use your skills and expertise to analyze problems, develop solutions, and work with Navy leaders to improve surface warfare. Work with us to help prepare Navy surface forces and staffs for deployment and success in their operational missions. Further your career while creating mission-forward solutions that matter. Join us. The world can't wait. You Have: \n • 8+ years of experience in Surface Warfare, including Department Head afloat or ashore\n, • Knowledge of Surface Navy readiness policies and systems\n, • Ability to develop, produce, and present briefings, issue papers, presentations, and documents at the tactical through strategic levels at the General Officer or Flag Officer level\n, • Ability to travel up to 25% of the time\n, • Secret clearance\n, • 2+ years of experience on a major Echelon III or above staff, or Joint or Combatant Command military staff\n, • Experience in Navy requirements development and Navy Program Objective Memorandum ( POM ) processes\n, • Experience with Surface Navy maintenance planning and maintenance management, and managing the employment, integration, or development of Navy C5I systems or networks\n, • Experience with Navy remote autonomous systems\n, • Experience as a Warfighting Tactics Instructor\n, • Experience with Navy logistics, training or personnel readiness systems, policies , and management\n, • Experience developing or validating Surface Navy Doctrine and Tactics, Techniques, and Procedures ( TTP )\n, • Knowledge of Navy tactical training systems, including the use of live, virtual, and constructive training\n, • TS / SCI clearance\n Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information ; Secret clearance is required. Compensation At Booz Allen, we celebrate your contributions, provide you with opportunities and choices, and support your total well-being. Our offerings include health, life, disability, financial, and retirement benefits, as well as paid leave, professional development, tuition assistance, work-life programs, and dependent care. Our recognition awards program acknowledges employees for exceptional performance and superior demonstration of our values. Full-time and part-time employees working at least 20 hours a week on a regular basis are eligible to participate in Booz Allen's benefit programs. Individuals that do not meet the threshold are only eligible for select offerings, not inclusive of health benefits. We encourage you to learn more about our total benefits by visiting the Resource page on our Careers site and reviewing Our Employee Benefits page. Salary at Booz Allen is determined by various factors, including but not limited to location, the individual's particular combination of education, knowledge, skills, competencies, and experience, as well as contract-specific affordability and organizational requirements. The projected compensation range for this position is $61,900.00 to $141,000.00 (annualized USD). The estimate displayed represents the typical salary range for this position and is just one component of Booz Allen's total compensation package for employees. This posting will close within 90 days from the Posting Date. Identity Statement As part of the hiring process, we will ask you to complete an identity verification process that leverages advanced biometrics and artificial intelligence to ensure authenticity and protect against identity fraud. You are expected to be on camera during interviews and assessments. We reserve the right to take your picture to verify your identity and prevent fraud. Candidate AI Usage Policy AI is a part of our daily work at Booz Allen, and we are committed to the responsible and ethical use of AI tools. However, we want to ensure a fair candidate process based on your own skills and knowledge. As part of this commitment, the use of artificial intelligence (AI) or other tools to assist with responses during interviews (whether in-person or virtual) is prohibited unless permission is explicitly provided. Work Model Our people-first culture prioritizes the benefits of collaboration, whether it occurs in person or virtually. To support engagement and effective communication, employees working virtually are generally expected to have their cameras on during meetings. \n • \nRemote: If this position is listed as remote, there may still be occasions when you are required to work in person at a Booz Allen or customer facility.\n, • \nHybrid: If this position is listed as hybrid, you will be expected to work from a Booz Allen facility frequently, in alignment with leadership expectations and the needs of the role. You may also be required to work from or visit a customer facility.\n All qualified applicants will receive consideration for employment without regard to disability, status as a protected veteran or any other status protected by applicable federal, state, local, or international law.

Olgoonik is an Equal Opportunity Employer Overview: The Shipper / Packer provides technical guidance to employees on the interpretation, application and modification of preservation, packaging and packing matters, to include processing criteria, procedures and techniques. Primary Responsibilities: • Resolves complex problems connected with preservation, packaging, and marking methods., • Blocks and braces a wide variety of military equipment and supplies., • Studies and analyzes the preservation, packaging, and packing program to assure program effectiveness., • Implement changes in packaging methods, requirements and procedures., • Establishes packaging standard operating procedures for the employees to follow., • Ensures that employees are provided with updates and changes to packaging regulations to include hazardous packaging requirements., • Reviews packaging discrepancies and recommends appropriate corrective actions., • Recommends methods of preservation when guidance is not readily available from data systems., • Researches technical, performance, environmental and cost data on packing materials., • Read specifications and photographs as/if required in DLA contract., • Participates in formal training in technical/certifiable aspects of packing and shipping hazardous material as required every two years., • Utilizes management policy, principles and practices to apply, interpret and implement packaging guidelines., • Knowledge of automated systems (e.g. DSS, HMIRS, FEDLOG, FLOS, JHCS, etc.)., • Applies conventional fact-finding, analytical and problem-solving methods and techniques to identify packing problems., • Analyze diverse and often vague data to determine trends, solve problems and recommend a course of action., • Keep abreast of and evaluate new developments pertaining to areas of responsibility to ensure that planning, approaches, findings and decisions will result in an efficient packaging/preservation process. Supervisory Responsibilities: • There are no supervisory responsibilities associated with the position. Education and/or Experience: • High School Diploma or GED required., • Minimum one (1) year specific experience in material handling, supply, distribution, inspection, or related areas., • One year using woodshop tools, fabricating containers, framing construction, or preservation, packing, and packaging., • One-year specific experience demonstrating ability to read blueprints, measure fabrication., • Experience identifying various materials for construction of wood containers. Knowledge, Skills, and Abilities: • Skill in operating materials handling equipment such as forklifts, tugs, stock selectors and other general-purpose equipment to move items to or from storage locations., • Proficient with Microsoft Suite products including Word, Excel, Access and Outlook software., • Demonstrate a good attitude and ability to work as a member of a team., • Ability to work effectively under a minimum of supervision., • Ability to multi-task efficiently, works in a fast-paced environment on multiple projects, and has a strong attention for detail. Certificates, Licenses, Registrations: • None Required. Security Clearance: • N/A Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs overhead and/or repetitively. Outside work in hot and cold or wet weather is occasionally required. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Olgoonik is an Equal Opportunity Employer Overview: Analyzes, plans, advises, operates, or evaluates the development and implementation of policies, procedures, standards, training, and methods for identifying and protecting information, personnel, property, facilities, operations, or material from unauthorized disclosure, misuse, theft, assault, vandalism, espionage, sabotage, or loss. Primary Responsibilities: • Developing, evaluating, maintaining, and/or operating systems, policies, devices, procedures, and methods used for safeguarding information, property, personnel, operations, and materials, • Developing and implementing policies and procedures for analyzing and evaluating the character, background, and history of employees, candidates for employment, and other persons having or proposed to be granted access to classified or other sensitive information, materials, or work sites. Supervisory Responsibilities: • There are no supervisory responsibilities associated with this position. Education and/or Experience: • High school diploma or GED required., • Experience shall include a minimum of three (3) years of experience in the security field\ Knowledge, Skills, and Abilities: • DLA experience is a plus, • Must have experience drafting business correspondence and written communication., • Excellent writing and interpersonal skills are required., • Must have experience in following policies and procedures, • Must be accurate and have good analytical skills., • Must have the ability to organize and coordinate workload to meet deadlines., • Must be proficient with Microsoft Suite of products including, Word, Excel, Access and E-mail business software., • Must demonstrate a good attitude and ability to work as a member of a Team., • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail. Certificates, Licenses, Registrations: • None Required. Security Clearance: • None Required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: General office/warehouse environment. Some travel both domestically and internationally may be required based on business demands. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law. to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Olgoonik is an Equal Opportunity Employer Overview: The Quality Control Specialist - QC manages quality program planning, quality program evaluation, identifying and resolved quality issues, and providing technical advisory services. Primary Responsibilities: • Evaluates systems, • Analyzes data, • Establishes control procedures, • Use DSS and other Government Data Systems, • Validates processes, • Performed IAW DLA Distribution Standard Operating Procedures (SOPs), • Audits Readiness Internal Controls Supervisory Responsibilities: • Supervisory responsibilities are not anticipated. Education and/or Experience: • BA/BS Degree in related field, • 4+ Years of Quality Control experience in an IT related environment, • Experience with Corrective Action Plans (CAP), • 3+ years' experience working with the Distribution Standard System (DSS), • 2+ years' experience with MIL-STD-129., • Government contracting experience is preferred Knowledge, Skills, and Abilities: • Knowledge of Material Hazard and Bio-Hazard Communication (MSDS), • Knowledge of the Material Receiving / Handling sections of ISO 9000, • Experience with OEM Process Flow System and Procedures (NCR), • Must be proficient with Microsoft Suite of products including Word, Excel, Access and E-mail business software., • Must demonstrate a good attitude and ability to work as a member of a Team, • Position requires self-motivation and the ability to work effectively under a minimum of supervision, • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail. Certificates, Licenses, Registrations: • Microsoft Office Suite (MOUS) Certification, Microsoft Certified Professional Security Clearance. Security Clearance: • The candidate must be able to pass a thorough government administered background investigation for the site. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: General office environment. Some travel both domestically and internationally required based on business demands. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Olgoonik is an Equal Opportunity Employer Overview: The Heavy Truck Driver drives gas or diesel powered trucks. Picks up, transports and deliver parts, material, equipment and components to pre-determined destinations. Vehicles typically weigh less than 1 tons. Drives vehicles both on and off of Government installations and in light to heavy traffic conditions. Transports Hazardous Material (HAZMAT) as necessary in performance of depot mission. Primary Responsibilities: • Drives trucks up to 26,000 pounds to destination for pickup and delivery based on instructions or directions received and by using maps., • Inspects truck for defects before and after trips., • Monitors vehicle during operation and reports maintenance/repair requirements to Dispatcher., • Secures loads being transported to ensure safe and undamaged arrival at destination., • Reports and receives direction via radio or cellular phone., • Assists in loading and unloading of material transported., • Must be able to hook up and/or disconnect tractor-trailer combination vehicles., • Maintains driver log according to ICC regulations., • Performs daily preventive maintenance adjustments to truck., • Performs all other duties as assigned. Supervisory Responsibilities: • Perform supervisory duties as assigned. Education and/or Experience: • Must have High School Diploma or GED (May substitute experience for education on a year-by-year basis)., • Must be able to obtain license to use any equipment for which a current license is not held within 30 days of selection., • Minimum six months general experience., • Minimum of six months specific experience demonstrating knowledge required to perform duties of position. Knowledge, Skills, and Abilities: • Must be proficient with Microsoft Suite of products including, Word, Excel, Access and E-mail business software., • Must demonstrate a good attitude and ability to work as a member of a Team., • Must be self-motivated and have the ability to work effectively under a minimum of supervision., • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail. Certificates, Licenses, Registrations: • Must have valid Commercial Driver's License (CDL). Security Clearance: SECRET Level Required • Must have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered Investigation., • Must be a U.S. Citizen., • Must also be able to maintain a US Government SECRET clearance. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs. overhead and/or repetitively. Outside work in hot and cold or wet weather is occasionally required.

Olgoonik is an Equal Opportunity Employer Overview: Perform duties of Quality Control Evaluation testing, evaluation, validation of processes, and training of distribution center work force in Quality Management. Primary Responsibilities: • Identify, examine, classify, inspect and report on specific and general issues of quality assurance and Quality Management. Examinations may be visual or require measuring devices and techniques., • Assists Project Lead in creation and implementation of Quality Control Plan, • Conducts Quality Control checks on completed project work, • Executes mock audits to ensure project team members are executing IAW DLA SOP's, • Reports Non-Conforming results to Project Lead, • Tracks QCP results and prepares reports, • Validate processes through statistical sampling and other measuring techniques., • Perform first article inspections as required., • Prepare reports as required., • Receive data from, and input data to Distribution Standard System (DSS) and other automated systems in performance of duties., • Quality Control point of contact for distribution mission., • Assist in reviews of inventory process, COSIS process, packaging and shipping processes to ensure continued emphasis on continuous process improvement., • Perform all other duties as assigned. Supervisory Responsibilities: • Supervisory responsibilities are not anticipated. Education and/or Experience: • High school diploma or GED required., • Two years of college is preferred. (May substitute experience for education on a year-by-year basis)., • Minimum two years' general experience., • Minimum of two years' specific experience in areas of inspection, quality assurance, and related areas., • Able to successfully certify in Safety, Hazardous Material (HAZMAT) and radioactive training requirements. Must be current in all certifications within 30 to 60 days of selection for position. Knowledge, Skills, and Abilities: • Must be proficient with Microsoft Suite of products including, Word, Excel, Access and E-mail business software., • Must demonstrate a good attitude and ability to work as a member of a Team., • Position requires self-motivation and the ability to work effectively under a minimum of supervision., • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail., • Able to use processes of inspection/examination procedures for material. *, • Able to read specifications, drawings, prints, schematics and photographs. *, • Must be able to follow requirements of MIL-STD 129. Certificates, Licenses, Registrations: • None. Security Clearance: SECRET Level Required • Must have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered Investigation., • Must be a U.S. Citizen., • Must also be able to maintain a US Government SECRET clearance. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: General warehouse/office environment. This position is on Second and or Third Shift. Some travel required between sites based on business demands. Some travel both domestically and internationally required based on business demands. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Olgoonik is an Equal Opportunity Employer Overview: Perform full range of duties in the receipt, stow and issue of material. Ensure items being stowed meet requirements of MIL-STD 129N. Primary Responsibilities: • Identify, examine, classify, accept, reject, and dispose of material as per DLA regulations. Examinations may be visual or require measuring devices and techniques under supervision of senior staff or management., • Load material on and off skids, pallets, and stands., • Operate tools and equipment in performance of duties., • Receive data from and input data to DSS and other automated supply systems in performance of duties., • Operate Material Handling Equipment (MHE) as assigned and hold appropriate license., • Count, weigh, record data, apply tags and labels., • Able to use basic processes of inspection/examination procedures for material., • Able to read specifications, drawings, prints, schematics and photographs., • Able to prepare reports relating to distribution functions., • Able to make preventive maintenance adjustments to related equipment., • Perform all other duties as assigned working with and around Hazardous Material., • Have and maintain a CDL, Class A with a HAZMAT endorsement. Education and/or Experience: • Must have High School Diploma or GED., • Minimum three years' specific experience in material handling, supply, distribution, inspection, or related areas., • Must be able to acquire license to use Material Handling Equipment (MHE)., • Must be proficient in the use of Distribution Standard System (DSS) and other automated distribution systems used at site., • Must be proficient with Microsoft Suite of products including, Word, Excel, Access and E-mail business software., • Must demonstrate a good attitude and ability to work as a member of a team., • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail., • Excellent driving record. Certificates, Licenses, Registrations: • Material Handling Equipment (MHE)., • Valid driver's license., • Provide continuous support for Hazardous materials (HM). Packaging and Shipping of hazardous material needs to be completed within 1 day of receipt. All packaging must be conducted by a HM certifier certified to Defense Transportation Regulations, Part III, Appendix J. All received HM will be processed in RDS and delivered to the NIWC HAZMAT Center according to current guidelines., • Affix proper shipping documentation, labels, and HM labels, as well as HM Dangerous Goods Declaration or Certification to material to be shipped. Security Clearance: Position requires U.S. Citizenship, a US Government background check and may require a US Government SECRET Clearance. If the SECRET Clearance Level is required, the candidate must also: • Have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered investigation., • Be able to maintain a US Government SECRET clearance. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs overhead and/or repetitively. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Olgoonik is an Equal Opportunity Employer Overview: Perform full range of duties in the receipt, stow and issue of material. Ensure items being stowed meet the requirements of MIL-STD 129N. Primary Responsibilities: • Perform inventory actions., • Identify, examine, classify, accept, reject, and dispose of material as per DLA regulations., • Examinations may be visual or require measuring devices and techniques under supervision of senior staff or management., • Load material on and off skids, pallets, and stands., • Operate tools and equipment in performance of duties., • Receive data from and input data to DSS and other automated supply systems in performance of duties., • Operate Material Handling Equipment (MHE) as assigned and hold appropriate license., • Count, weight, record data, apply tags and labels., • Use basic processes of inspection/examination procedures for material., • Read specifications, drawings, prints, schematics and photographs., • Prepare reports relating to distribution functions., • Make preventive maintenance adjustments to related equipment. There are no supervisory duties associated with this position. Education and/or Experience: • High School Diploma or GED required, • Proficient in the use of Distribution Standard System (DSS) and other automated distribution systems used at site., • Proficient with Microsoft Suite products including Word, Excel, Access and Outlook software., • Demonstrate a good attitude and ability to work as a member of a team., • Ability to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail., • Material Handling Equipment (MHE) license. Must be certified to operate MHE in accordance with manufacturer guidelines. Operators must be able to safely access, control, and operate the equipment within all physical design and safety limitations defined by the manufacturer. Position requires U.S. Citizenship and a US Government background check . If the SECRET Clearance Level is required, the candidate must also: • Have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered investigation. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs overhead and/or repetitively. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Olgoonik is an Equal Opportunity Employer Overview: The Warehouse Specialist Lead - SD performs full range of duties in the receipt, stow and issue of material. Ensure items being stowed meet requirements of MIL-STD 129N. Must be proficient in use of anti-static devices. Provide COSIS/Shelf-Life inspection as required in depot contract agreement. Perform kitting functions and provide cost estimates for preparation of kits. Provide daily work assignments to other storage personnel assigned to work center. Primary Responsibilities: • Assists the Supervisor in scheduling work, responsible for instructing and aiding a group of employees., • Performs evaluations and assists the supervisor in maintaining a smooth flow of work and maintains records., • May be temporarily called upon to act on behalf of a supervisor in cases of emergency or absence., • Identifies, examines, classifies, accepts, rejects, and disposes of material per DLA regulations. Examinations may be visual or require measuring devices and techniques., • Must be able to conduct inventory/causative research, read supply manuals, specifications, drawings, and prints., • Loads material on and off skids, pallets, and stands., • Conducts Shelf-Life and COSIS actions as necessary and conduct material coordination duties for special programs as required., • Prepares labels as required., • Prepares reports as required., • Operates tools and equipment in performance of duties., • Receives data from and inputs data to DSS and other automated supply systems in performance of duties., • Operates Material Handling Equipment (MHE) as assigned and hold appropriate license., • Counts, weighs, records data, apply tags and labels., • Makes preventive maintenance adjustments to related equipment., • Performs all other duties as assigned. Supervisory Responsibilities: • Assists the Supervisor in scheduling work, responsible for instructing and aiding a group of employees., • Performs evaluations and assists the supervisor in maintaining a smooth flow of work and maintains records. Education and/or Experience: • High School Diploma or GED required., • 2 years of college or technical school preferred (may substitute experience for education on a year-by-year basis)., • 5 years general experience, • 3 years specific experience in material handling, supply, distribution, inspection, quality assurance, or related areas. Knowledge, Skills, and Abilities: • Knowledge of supply inspection/examination procedures for material., • Knowledge of inventory research techniques for unmarked/defective material requiring identification., • Proficient in the use of Distribution Standard System (DSS) and other automated distribution systems used at site. Familiar with MIL-STD 129., • Proficient with Microsoft Suite including, Word, Excel, Access and E-mail business software., • Demonstrate a good attitude and ability to work as a member of a team., • Ability to work effectively under a minimum of supervision., • Ability to multi-task efficiently, works in a fast-paced environment on multiple projects, and has a strong attention for detail. Certificates, Licenses, Registrations: • None Required Security Clearance: Position requires U.S. Citizenship, a US Government background check and may require a US Government SECRET Clearance. If SECRET Clearance Level is required, candidate must also: • Have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered Investigation., • Be able to maintain a US Government SECRET clearance. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: General office environment. Travel may be required based on business demands. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Olgoonik is an Equal Opportunity Employer Overview: Perform full range of duties in the receipt, stow and issue of material. Ensure items being stowed meet the requirements of MIL-STD 129N. Primary Responsibilities: • Perform inventory actions., • Identify, examine, classify, accept, reject, and dispose of material as per DLA regulations., • Examinations may be visual or require measuring devices and techniques under supervision of senior staff or management., • Load material on and off skids, pallets, and stands., • Operate tools and equipment in performance of duties., • Receive data from and input data to DSS and other automated supply systems in performance of duties., • Operate Material Handling Equipment (MHE) as assigned and hold appropriate license., • Count, weight, record data, apply tags and labels., • Use basic processes of inspection/examination procedures for material., • Read specifications, drawings, prints, schematics and photographs., • Prepare reports relating to distribution functions., • Make preventive maintenance adjustments to related equipment. There are no supervisory duties associated with this position. Education and/or Experience: • High School Diploma or GED required, • Proficient in the use of Distribution Standard System (DSS) and other automated distribution systems used at site., • Proficient with Microsoft Suite products including Word, Excel, Access and Outlook software., • Demonstrate a good attitude and ability to work as a member of a team., • Ability to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail., • Material Handling Equipment (MHE) license. Must be certified to operate MHE in accordance with manufacturer guidelines. Operators must be able to safely access, control, and operate the equipment within all physical design and safety limitations defined by the manufacturer. Position requires U.S. Citizenship and a US Government background check . If the SECRET Clearance Level is required, the candidate must also: • Have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered investigation. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs overhead and/or repetitively. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Helix Electric was founded in 1985 and is now one of the nation's largest and most successful electrical contracting companies. Our commitment to empowering people and powering projects is realized by our exceptional team of dedicated and highly skilled experts working together and never settling for good enough. We are proud of the team-oriented and employee-empowered business approach that defines our unique character. Our Project Engineer assists their Project Manager on projects and is the liaison between the field and the office. In this role, the PE is responsible for defining the project's objectives by planning, executing and finalizing projects according to the schedule while keeping within the budget. OUR INTERNSHIP PROGRAM: As an intern at Helix Electric you will be trusted with meaningful responsibilities that have a lasting impact on the projects you touch. This hands-on approach to learning coupled with our top-notch mentor program affords all Helix interns the opportunity to develop skills that ensure their continued growth well beyond graduation. Our University Relations Team is dedicated to ensuring all interns have an experience where they learn, grow, and contribute value. To provide a well-rounded experience, all interns are exposed to a variety of project types, phases of construction, and project teams. Join Team Helix to empower people and power projects. DUTIES & SCOPE: • Develop relationships with project managers, subcontractors, engineers, and vendors to ensure a team approach and lay a foundation for building a career in the construction industry., • Collaborate with superintendent to track material; maintains positive relationships with vendors for tracking, coordination, and close-out purposes., • Act as a champion of the Helix safety culture. Monitors and encourages jobsite safety and accident prevention., • Engage in the Change Order process and is introduced to Accubid to assist with estimating., • Partner with the project team to analyze subcontract agreements to better understand scope of work and project pricing., • Involved with material and equipment procurement., • Collaborate closely with the BIM department and is directly involved in the coordination and planning process., • Produce and maintain detailed job logs (transmittals, submittals, RFIs)., • Exposure to and monitoring of quality control., • Manage labor schedules by working closely with superintendents and project managers., • Create and order prefabricated assemblies to assist in planning and on time delivery., • Enrolled in a bachelor's degree program such as Construction Management, Electrical Engineering, Civil Engineering, Architectural Engineering, or a related field., • Previous construction or internship experience preferred., • Highly motivated with a tendency to take initiative., • Basic math skills with ability to calculate and analyze data., • Excellent written and verbal communication skills., • Good organizational skills., • The ability to work well with all levels of the organization., • A mindset for making continuous improvements of department processes. The starting hourly base pay for this role is between USD $21.00 and $24.00 per hour. The actual base is dependent upon many factors, such as: location, training, transferable skills, work experience, business needs and market demands. The base pay range is subject to change and may be modified in the future. The role may also be eligible for bonus and benefits. Helix Electric provides a comprehensive benefits package that includes the following: • Relocation assistance, • Housing stipend or corporate apartment #LI-HK1 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Olgoonik is an Equal Opportunity Employer Overview: Performs duties of warehousing and distribution operations and supply management requirements IAW terms and conditions of the contract supporting DLA Distribution Norfolk at Portsmouth Virginia and DLA Maritime Norfolk. Supervises unionized workforce using various Government and Commercial applications, which includes NAVSEA's Material Access Technology (MAT) System and Automated Request for Kitting (ARK). Supervises employees performing services in both inside and outside areas including on open docks. Warehouse Specialist Supervisor will ensure employees are cross-trained to move between the functional areas. Warehouse Specialist Supervisor takes direction from the Site Manager and completes contract services at DLA Distribution Norfolk at Portsmouth Virginia and DLA Maritime Norfolk, which is located at the Norfolk Naval Shipyard Portsmouth, VA (NNSY), at Naval Station (NSN) Norfolk and off-site locations when required. Supervises employees working various rotating shifts, various adjusted hours, overtime, and weekends commensurate with workload requirements to support the customer. Primary Responsibilities: • Oversees storage and distribution operations., • Directs employees engaged in receiving, storing, issue, shipment and distribution of a variety of bin and bulk materials, equipment, and commodities using automated and manual material moving equipment, devices, and systems., • Plans the use of subordinate workers, equipment, facilities, and materials based on projected workload on weekly or monthly bases., • Establishes deadlines, priorities, and work sequences in agreement with general work schedules, methods, and policies established by Site Manager., • Redirects workers and resources to accomplish unanticipated work and to accommodate daily workload fluctuations., • Conducts planning of current and future work schedules, providing workload data, estimates, information on staffing needs, and recommendations as to the scheduling of projected work., • Ensures work is done properly and efficiently in agreement with the terms and condition of the contract., • Uses MAT and other Government Data Systems to perform the requirements in the PWS, i.e., resolving common error conditions, responds to computer output instructions or error conditions, and following SOPs., • Must possess a motor vehicle and forklift license for forklifts up to 20K. Supervisory Responsibilities: • Manages subordinate lead personnel and meeting contract performance standards., • Ensures workforce personnel wear all required personal protection equipment (PPE) (e.g., hearing protection, eye protection, gloves, safety boots/shoes, aprons, masks, face shields, reflective vests, safety harnesses) during the performance of their duties., • Ensures area of responsibility is operating in agreement with all referenced DLA Distribution SOPs, addendums, FRAGOS, and Process Manuals as required for day to day operational processing and preparation for any audit event., • Responsible for compliance with the Audit Assertion Program reporting and documentation requirements, Assertion Memo IAW CDRL A034, to include monthly assertion reporting that assigned areas of responsibility are ready for audit and or corrective action plans are documented and being corrected if an assertion cannot be made., • Responsible for the Audit Assertion Program functional areas of Offload/Tally, Receipt Induction, Stow/Warehousing, Re-warehousing and Stock Selection, i.e. Pick/Pack/Prep for Shipment. Education and/or Experience: • High School degree required. Bachelor's degree in Business or Logistics preferred., • Must have a minimum of three (3) years of experience in distribution and warehousing using MAT or equivalent automated Warehouse Management System (WMS) within the past five (5) years. Knowledge, Skills, and Abilities: • Must be knowledgeable in DD1348-1A receipt processing, Navy requisitions, inventory practices, supply operations, data entry into personal computers and scanning devices, and possess an understanding of warehouse storage plans., • Direct experience using various Government and Commercial applications including NAVSEA's Material Access Technology (MAT) System and Automated Request for Kitting (ARK)., • Interface with and support material owners, other Material Distribution Activities, DLA Primary Level Field Activities, and other customers to accomplish the contract requirements. Certificates, Licenses, Registrations: • Must possess a motor vehicle and forklift license for forklifts up to 20K. Security Clearance: Position requires U.S. Citizenship, a US Government background check and may require a US Government SECRET Clearance. If SECRET Clearance Level is required, candidate must also: • Have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered Investigation., • Be able to maintain a US Government SECRET clearance if required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. Lifting and moving warehouse items up to 70 pounds without MHE assistance. Work Environment: General office environment. Some travel both domestically and internationally may be required based on business demands. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.