Material jobs in Fort Worth, TexasCreate job alerts

Job Description Job Summary Position reports to Welding Supervisor and is subordinate to the team leader. Areas of responsibility include final welding for sub-components. Duties may include welding outside of designated weld area to meet equipment needs. Duties may include assembly or subassembly of product when required for proper final welding. Job Duties  Final welding of sub-components. • Complete final welding activities of sub-components following requirements for welding techniques (critical/structural welds, continuous welds, skip welds, etc.), • Consult with Team Leader on nontraditional fabrication requirements and fixtures.  Work with Team Leader and Team Members to meet job requirements, quality standards and schedule dates. • Ensure that sub-components are properly welded with quality welds., • Identify and/or confirm defective items and report them to the Team Leader for disposition., • Maintain accurate time sheet.  Maintain organization in assigned work areas. • Ensure organized storage of tools, welding equipment, and supplies. Keep area clear of clutter and other hazards., • Notify Team Leader of maintenance needs for equipment.  Comply with H&S Environmental, Health and Safety Programs. • Read, comprehend, and comply with H&S Safety Manual and Employee Handbook.  Other activities as directed by Welding Supervisor. Qualifications  Ability to read and understand fabrication drawings and specifications from the Engineering Department.  Ability to give, receive and understand oral and written instructions in English.  Ability to complete training and operate forklifts, overhead cranes, welding equipment, pneumatic and electric power tools.  Understanding of welding techniques and the use and capabilities/capacities of welding equipment and tools.  Ability to identify and solve problems.  Stable employment and attendance history. Objectives  Weld all sub-components with best effort to meet target dates established with minimal mistakes.  Perform work activities in a manner that produces the highest possible quality for the finished product in the most efficient way.  Identify, recommend and implement new procedures, new tooling/fixtures, and new technology in supplies and equipment in an effort to improve efficiency and/or quality in the welding processes.  Meet and exceed company policies regarding safety, quality and environmental compliance.  To continue to develop skills and knowledge increasing employees value to the company. Company DescriptionHayes and Stolz Industrial Manufacturing Company, a leading manufacturer of customized bulk material handling and processing equipment. Our focus is to understand our customer's equipment requirements and deliver a solution that is reliable and cost effective. The new team member will be working in our new facility in Burleson, Texas that was built in 2017. Hayes and Stolz offers competitive pay and benefits, including but not limited to 401k retirement plan with company match, health, dental, vision and voluntary short-term disability, and a generous holiday and vacation schedule.Hayes and Stolz Industrial Manufacturing Company, a leading manufacturer of customized bulk material handling and processing equipment. Our focus is to understand our customer's equipment requirements and deliver a solution that is reliable and cost effective. The new team member will be working in our new facility in Burleson, Texas that was built in 2017. Hayes and Stolz offers competitive pay and benefits, including but not limited to 401k retirement plan with company match, health, dental, vision and voluntary short-term disability, and a generous holiday and vacation schedule.

Job Description Material Handler duties and responsibilities Required to work with a supervisor and production team. Typical day-to-day responsibilities include: • Verifying the accuracy of quantity and quality of incoming deliveries, • Labeling every product and placing them accordingly, • Identifying and locating the right products during the delivery process, • Keeping all material handling equipment in the best condition by conducting regular maintenance, • Conveying purchasing requirements and keeping data on the availability of products in short supply, • Collaborating with internal departments to locate missing packages, fix incorrect deliveries and replace damaged products, • Sorting raw materials for heat treatment and outside processing.

Job DescriptionNow Hiring – Flux Core Welders for WEEKDEND SHIFT 4am - 4pm 12 hours shift Friday, Saturday & Sunday Location: Fort WorthShift: • 2nd Shift: 4:00 PM – 2:30 AM or Weekend shift 4am to 4pm - Fri, Sat Sun, • Perform Flux Core welding using 1/16" or .052 wire, • Welding structural steel components for utility applications, • Maintain high standards for weld quality, safety, and efficiencyWeld Test Requirements:, • 2G Bend Test, • Experience with Flux Core welding (heavy gauge material), • Ability to pass the required weld test

Job Description • Maintain a smooth and timely flow of stock to production by accurately filling requisitions and transporting materials throughout the facility., • Receive, verify, and document incoming deliveries by checking counts, inspecting for damages, and completing proper inventory and pricing paperwork., • Safely operate material handling equipment (forklifts, pallet jacks, etc.) to move raw stock, base stock, supplies, and finished goods., • Weigh and prepare raw stock using scales according to written and oral instructions., • Store accepted deliveries in designated stock areas, ensuring proper organization and accessibility., • Assist with scheduled physical inventories and cycle counts, helping to maintain accurate stock records., • Monitor low stock levels and non-inventory supplies (e.g., pallets, cartons, carbon) and promptly communicate needs to appropriate personnel., • Coordinate with the Production Team to prioritize material flow, reorganizing when needed to meet shifting deadlines., • Support company goals by working closely with team members to ensure customer satisfaction and operational efficiency.Company DescriptionSchoening Technology Group is an organization of proven success among IT professionals and our clients whom we provide efficient and cost effective programs and solutions. We understand that our clients need qualified and reliable professionals, that is why our recruiting team assumes a thorough understanding our client's needs and requirements. We engage numerous resources in the community, industry and beyond to get the best resources for our clients,Schoening Technology Group is an organization of proven success among IT professionals and our clients whom we provide efficient and cost effective programs and solutions.\r\n\r\nWe understand that our clients need qualified and reliable professionals, that is why our recruiting team assumes a thorough understanding our client's needs and requirements. We engage numerous resources in the community, industry and beyond to get the best resources for our clients,

Job Description Position: Journeyman Ironworker Job Location: Crowley, TX Position Type: Full-Time • Base Wage: $30-$32 hr, • Crowley Indoor Track Facility Iron Worker Wage Scale $35.82 hr, • $550 per-diem and travel pay if eligible (home must be outside 60 mile radius of job site to receive travel or per diem), • Medical insurance and other insurance benefits available., • 1-week Paid vacation & paid holidays after 1 year of service., • Must be eligibe to work in the US. Required Skills • Bolt-up structural member following blueprints and instructions from supervisors., • Rig structural-steel members to hoist cables, using chains, or cables., • Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members., • Detail Work: may include installing angle and bent plate, welding clips, joists, tube steel or angle kickers; installing safety cable and safety posts; or shaking out and spreading joists and long spans., • Assembling: Plumbing of structural steel; installing deck; installing and welding steel stairs, handrail and guardrail., • Field fabrication or assembly of metal parts such as steel frames, columns, beams, and girders, according to blueprints or instructions from supervisors., • Use all safety and personal protective equipment for the purpose intended. Use of safety harness and lanyard for proper tie off., • Operate boom lift and scissor lift., • Pull, push, or pry structural-steel members into approximate positions for bolting into place., • Rigger / Signal Person, • OSHA 10, • Aerial Lift

Job Description Gulfeagle Supply is a family-owned business with over 100+ locations nationwide. We are a full line distributor of residential and commercial roofing and building products. Gulfeagle Supply specializes in servicing the professional contractor while also providing a variety of products and services to the homeowner, building owner, architect and general contractor. We take pride in delivering the highest quality and best value to our customers and we would be pleased to make you part of the mission. Here at Gulfeagle we are "Building a Career for YOU" WAREHOUSE HELPER Are you eager to join a growing company that provides advancement opportunities? Gulfeagle Supply is looking for hardworking individuals that desire a career in the distribution industry. We hold the development of people as a core value and are proud to provide our employees with the tools necessary for career growth and continued success. Our Warehouse Helpers work under the direction of the Branch Manager and are responsible for operating the warehouse forklift while performing various material handling duties in a safe, customer-oriented manner. ESSENTIAL FUNCTIONS: • Safely operate the forklift to store material in warehouse in an organized fashion and pull material as needed to load in customer and branch vehicles., • Receiving materials from vendors, verify quantity for accuracy, complete paperwork as appropriate., • Assist in taking inventory quarterly or as needed., • Maintain warehouse, yard, and trucks in a proper presentable manner. Minor repairs as needed., • Responsible for the safe handling of materials and adhering to company safety regulations at all times; including wearing back brace, gloves, shoes, and other safety devices as appropriate., • Aiding customers with materials, reporting problems, with deliveries, and service issues., • Must be able to work both indoors and outdoors under adverse weather conditions, • Ability to bend, reach, lift and climb, • Forklift Licensed/Certified, • Must have the ability to lift up to 100 pounds of material continually, • Must be a U.S. citizen or be authorized to work in the U.S. * Education: • High School diploma or equivalent Gulfeagle Benefit Package: • 401(K) Retirement Plan including Employer Match, • PTO & Paid Holidays, • Health Insurance - Medical, Dental & Vision, • Life, AD&D, Short & Long-Term Disability, • Health &Wellness Programs, • Flexible Spending Accounts, • Health Savings Accounts, • Employee Discount Programs, • and more! This Job Summary indicates the general nature and level of work expected of the incumbent(s). It is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the incumbent. Incumbent(s) may be asked to perform other duties as requested. Gulfeagle Supply is an Equal Opportunity Employer. We do not discriminate based on age race, gender color, religion, national origin, disability marital status, veteran status, sexual orientation, gender identity, or other characteristics protected under federal, state, or local law. All duties and responsibilities are essential job functions and requirements and are subjected to possible modifications to reasonably accommodate individuals with disabilities. We are proud to be an EEO employer M/F/D/V. We maintain a drug-free workplace. Company DescriptionGulfeagle Supply is a family owned distributor of residential/commercial roofing & building products with over 75 locations nationwide. Are you looking for a career opportunity with a growing company? Look no further!Gulfeagle Supply is a family owned distributor of residential/commercial roofing & building products with over 75 locations nationwide. Are you looking for a career opportunity with a growing company? Look no further!

Job DescriptionTellworks Logistics, headquartered in Atlanta, Georgia with locations throughout the United States, is a leading provider of supply chain services. Our company offers warehouse and logistics services for companies who depend on service excellence and require a personalized, rather than one-size-fits-all, approach to their materials management requirements. Job Position: Order Picker Brief Description Responsible for labeling and consolidating products accurately, picking and pulling cartons/boxes; placing materials on pallets or in staging areas and/or other applicable spaces within the warehouse. Assist shipping and receiving unloading trucks, matching material documents to requested orders. Other duties as necessary (labeling, cleaning, sweeping, mopping, maintenance, and special projects). Essential Functions The following is intended to describe the general nature and level of work being performed. It is NOT an exhaustive list of all expectations. The individual in this position must be capable of performing all the essential functions with or without a reasonable accommodation. • Consolidate cartons and material from storage areas accurately and within specified performance requirements, • Consolidate inbound and outbound freight from trailers and/or containers, • Ensure that there is no damage to the product and verify received against the physical count of stock, • Read, decode, and decipher product coding to expedite order movement, • Maintain a clean, orderly workstation, returned supplies, and merchandise to assigned locations and cleaned the work area at the end of each shift, • Ability to stand and walk for a full workday Description of Minimum Job Requirements • High School Diploma or Equivalent, • Prefer 2-4 years of experience, • Must be able to read, decode, and decipher freight coding, • Consistently lift, standing, bending, and rotating motions, • Operate hand truck and Stand up reach forklift, • Must be able to read and write English, • Basic Mathematics Skills This is intended as a description of the way the job is currently performed. It does not address the potential for accommodation. • Must be able to move about the warehouse to access products, and machinery and assist others, • Must be able to move and place cartons on pallets weighing up to 60 pounds, • Must be able to bend downward using legs at the knee, • Must be able to detect, determine, perceive, identify, recognize, judge, observe, inspect, estimate, and assess product, • Basic mathematics skills (add, divide, multiply and subtract), • Ability to interpret instruction, • Basic computer skills, • Must be reliable and dedicated to good attendance, • Must be available to occasionally work overtime, as required, • Must be adaptable to changing work tasks and workload, • Must be dedicated to working safely Benefits: • Medical insurance, • Dental Insurance, • Vision insurance, • Paid Time Off, • 401k

Job Description Monday Through Friday From 7am-6:45pm Some Weekends required Overtime REQUIRED Payrate is $16/Hr Immediate Hire!!! Please Call 214-396-1501 for more information or visit us at 3340 S Watson Rd Arlington Tx 76014 Order Picker-This position requires familiarity with warehouse management system (WMS) technologies, including RF scanners and tablets. The primary responsibility of Order Pickers is to ensure that the items picked and packed for orders are accurate and free from damage prior to shipping. Order Pickers are expected to meet their daily picking and packing targets while adhering to health and safety compliance standards. REQUIRED QUALIFICATIONS/SKILLS -High School Diploma or GED required. -1-3 years Warehouse and Shipping experience; 1-2 years forklift driver experience with fall protection and other material handling equipment. -Able to effectively communicate in English, both verbal and written, for safety and inventory management requirements. -Physical Requirements: The Warehouse Associate must be able to lift heavy objects up to 50 pounds, stand, walk, and bend for extended periods of time. Key Responsibilities • Ensure the warehouse is accessible and safe for customer and employee traffic., • Mark materials with identifying information using the appropriate method., • Open skids, crates, and other containers., • Assist in counting physical inventory., • May be assigned facilities maintenance duties as needed., • Complete requisition forms to order supplies from other departments., • Prepare parcels for mailing., • Load, transport, and deliver items to clients or businesses in a safe, timely manner., • Load and unload items from vehicles., • Adhere to assigned routes and follow time schedules., • Abide by all transportation laws and maintain a safe driving record., • Prepare reports and other documents relating to deliveries., • Operate equipment and machines, such as cars, trucks, forklifts, etc., • Sweep, dust, and mop., • Organize the warehouse and work area for orderliness at all times., • Comply with company policies and procedures for individual and team safety Skills Needed- • Excellent oral and written communication skills, • Ability to use picking machines in warehouses and manually pick items, • Knowledge of in-house databases and order tracking software, • Interpersonal skills, • Ability to work while standing for long hours and consistently lift at least 55 lbs. safely, • Knowledge of warehouse health and safety policies and procedures Benefits of working for REX Personnel: Weekly pay Insurance and benefits Holiday pay Vacation pay Model employee bonuses (where applicable) Attendance bonuses (where applicable) Sign on bonuses (where applicable) Diverse team of staff and recruiters who are always accessible Prompt, friendly and multilingual serviceREX Personnel offers long term, temp-to-perm jobs in warehouse and manufacturing. We are a compassionate company with a large team of recruiters and support staff that want the best for our candidates. We are honest, transparent, supportive, and we try to be helpful to our candidates and employees in as many ways as we can.\r\n\r\nBenefits of working for REX Personnel:\r\n\r\nWeekly pay\r\nInsurance and benefits\r\nHoliday pay\r\nVacation pay\r\nModel employee bonuses (where applicable)\r\nAttendance bonuses (where applicable)\r\nSign on bonuses (where applicable)\r\nDiverse team of staff and recruiters who are always accessible\r\nPrompt, friendly and multilingual service

Job Description Position Summary: The Welder’s role is to weld parts safely, quickly and accurately, meeting or exceeding customer specs by reading blueprints, including weld symbols; ensuring correct machine settings, shielding gas, weld position, and filler material are used. Primary Responsibilities: • Fit and weld parts according to customer specifications, meeting or exceeding customer specs, both structural and aesthetic., • Knowledge, understanding, and use of weld symbols, • Knowledge, understanding, and use of blueprints, • Ability to MIG / Fillet weld, • Ability to 2G and/or 3G uphill weld, • Ability to double V groove weld, • 100% Company Paid Long Term Disability and Life Insurance, • Medical, • Dental, • Vision, • Paid Time Off (PTO), • 401k with Company Match, • Critical Illness, • Hospital Indemnity, • Accident Insurance Entry Level – (Level 1) - Welder ($18+) • Skills: Basic understanding of welding safety, tools, and techniques., • Processes: Simple MIG welding., • Tasks: Fitting, Tack welding, basic welding, assisting experienced welders., • Skills: Proficient in MIG welding, and basic TIG welding processes., • Processes: Can weld in multiple positions (flat, horizontal, vertical), • Task: Structural welding, pipe welding, blueprint reading, quality control., • Skills: High Precision welding, complex joint configurations, metallurgy knowledge. Proficient in MIG and TIG welding processes., • Processes All-position welding on steel, aluminum, stainless steel., • Task: SME, training, inspection, and custom fabrication. This position is carried out in a fabrication shop environment and as such has the following physical work requirements: • Must be able to lift up to 100lbs., • Must be able to position welding apparatus in any position the work required., • Position requires ability to stand for prolonged periods of time., • Position may require bending, kneeling, and stooping., • Exposed to shop elements such as noise, dust, odors, and chemicals. Physical weld testing on site must be acceptable. All qualified applicants will receive considerations for employment without regard to race, color, sex (including pregnancy), religion, national origin, age, disability, veteran status, or any other status protected by applicable law. We are committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs and activities

Job Description Company Overview: MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The Fabricator/Welder builds, fits, and installs structural fabrications, equipment frames, guards, platforms, and process piping that support magnet manufacturing operations. This role partners closely with Engineering to interpret drawings, prototype new designs, and deliver high‑quality, reliable fabrications on schedule. Success in this role requires expert layout and fit‑up, proficiency in multiple welding processes (GTAW/TIG, GMAW/MIG, SMAW; FCAW a plus), strong pipefitting skills, and a relentless commitment to safety and craftsmanship. Position Responsibilities: • Set up and operate manual and CNC lathes to turn shafts, journals, and threaded features, control runout, concentricity, and surface finish to spec., • Mill, drill, bore, and tap components on manual/CNC mills; perform precision layout and hole patterns., • Perform surface and cylindrical grinding (OD/ID) and honing to achieve tight tolerances and finishes on critical features., • Build, repair, and optimize tools, dies, jigs, fixtures, gauges, and special tooling for production and R&D/pilot operations., • Read and interpret engineering drawings, GD&T callouts, isometrics, and 3D models; verify dimensions/tolerances before and during machining., • Program, set up, and prove out CNC jobs (conversational or CAM); select tooling, speeds/feeds, work holding, and offsets to meet quality and takt., • Inspect in process and final parts using micrometers, bore gauges, indicators, height gauges, pins, optical comparator, and (as available) CMM., • Hold tight tolerances as required (e.g., shaft/bore fits down to ±0.0005 in; critical features to ±0.0002 in) and document results., • Deburr and finish parts to meet surface roughness and edge break requirements., • Assemble, fit, and try out tooling; diagnose and correct issues (alignment, clearance, spring/stripper force, galling, wear)., • Collaborate with Engineering on prototypes and engineering changes; redline prints and suggest design-for-manufacture/assembly (DFM/DFA) improvements., • Manage toolroom organization (5S), maintain machines and tooling, and track spares/consumables; coordinate heat treat and coating services when needed., • Record time, parts, and work details in SAP CMMS; maintain traceability/documentation as required., • High school diploma or equivalent, 4+ years of industrial fabrication/welding experience in a manufacturing, maintenance, or shop environment., • Proficiency in GTAW/TIG (stainless and carbon) and GMAW/MIG; SMAW required; FCAW experience is a plus., • Strong blueprint reading skills including weld symbols; ability to work from isometric drawings and basic P&IDs., • Demonstrated pipefitting ability (takeoffs from isos, offsets, fit‑up, and support installation) to meet quality/tolerance requirements., • Competent with layout math and precision measurement tools (tape, calipers, squares, angle finders, levels, lasers)., • Safe operation of forklifts, overhead cranes, and common fabrication tools; ability to obtain/maintain certifications., • AWS D1.1 (structural steel) and/or AWS D1.6 (stainless) certifications; ASME Section IX qualifications for pipe a plus., • Experience with sanitary tubing/orbital TIG, vacuum or high‑purity gas systems, or cryogenic piping components., • Experience building jigs and fixtures; basic machining (sawing, light mill/lathe ops) for fit‑up., • Familiarity with GD ability to interpret tolerance stacks in drawings., • Experience collaborating directly with engineers/designers; comfortable giving manufacturability feedback and executing redlines. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description POSITION SUMMARY: The Quality Control Inspector is responsible for all inspections performed to ensure compliance to approved data, Federal Aviation Regulations, the RSQCM, and/or data acceptable to the administrator. This is an experienced-level position with no supervisory responsibilities that reports to the Chief Inspector. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES • Ensures that no defective, unserviceable or un-airworthy parts are used on any components or articles released by Aspire., • Ensures all fabricated parts are labeled and identified properly., • Inspects work performed to ensure compliance., • Performs receiving inspection functions as authorized and prescribed in the RSQCM., • Accomplishes all necessary inspections of articles maintained by the repair station to ensure overall quality of workmanship and material used in the fabrication process., • Notifies the Quality Control Supervisory Personnel in a timely manner of any quality concerns and items related to airworthiness that are not resolved through the normal course of the day; These items may be communicated by email, voice mail or documented in the Shift Turnover Log. Quality Control Inspectors will ensure that quality concerns and items related to airworthiness are addressed and tracked until resolution., • Coordinates with the Inspection Supervisory Personnel to determine daily priorities of required inspection items., • Demonstrates a thorough familiarity with all applicable FARs, company, and customer manuals applicable to their work assignments., • Demonstrates a thorough familiarity with all necessary tooling, inspection aids and techniques to accomplish assigned tasks., • Ensures all maintenance and alterations that are performed by the repair station are in compliance to the applicable technical data., • When Aspire MRO requires working multiple shift operations Aspire MRO supervisory personnel shall ensure the Shift Turnover Report (PD-Form-3) clearly communicates any pertinent information and maintain communication and continuity from shift to shift. Ensures that the turnovers are completed post shift (all Shifts) and filed daily., • Other duties as assigned. REQUIRED QUALIFICATIONS: • High School Diploma or equivalent., • Airframe & Power Plant license, • 5+ years of related heavy maintenance experience on commercial aircraft (B737, B757, B757, B777, A330, etc.). PREFERRED QUALIFICATIONS: • FAR 145 Quality Control Maintenance knowledge or experience. SUCCESS FACTORS/JOB COMPETENCIES: • Good understanding of Quality requirements, inventory control., • Good knowledge of FAA regulations., • Understanding of Company operations., • Able to organize, coordinate, and direct team activities., • Strong problem-solving skills., • Good Communication skills., • Able to use all related maintenance equipment and computer applications., • Must be able to understand, read, write, and speak Standard English, including technical, aircraft and quality control-related vocabulary, for technical and general business correspondence and for producing work products., • Must be able to adhere to all established safety policies, processes, and procedures. WORK ENVIRONMENT: This job operates in indoor and, occasionally, outdoor settings. The indoor settings include office and warehouse/airplane hangar environments which require the use of standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines and safety gear. The outdoor settings include airplane runways and parking lots. The noise level in the work environment is occasionally loud. Occasionally subject to varying inside and/or outside temperatures, which may include extreme heat (temperatures above 100 degrees) or extreme cold (temperatures below 32 degrees). While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit or stand. The employee frequently is required to use the fingers to make small movements such as typing, picking up small objects, or pinching fingers together. This would also occasionally require the ability to walk; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. Exerts up to 50 lbs. regularly, and/or up to 20 lbs. frequently. Occasionally lifts up to 100 lbs with assistance. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. TRAVEL: Travel may occasionally be required for this position (10% or less). WORK AUTHORIZATION/SECURITY CLEARANCE: Must be able to legally work in the US without sponsorship. Must be able to pass a post offer DOT drug test upon hire. EQUAL EMPLOYMENT OPPORTUNITY AND AFFIRMATIVE ACTION PLAN: Aspire MRO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. Aspire will also take affirmative action as called for by applicable laws and Executive Orders to ensure that minority group individuals, females, disabled veterans, recently separated veterans, other protected veterans, Armed Forces service medal veterans, and qualified disabled persons are introduced into our workforce and considered for promotional opportunities.

Job Description We are currently seeking an experienced DRYWALL TECHNICIAN to join our team in Dallas! You will be responsible for completing work orders and other required tasks. Responsibilities: • Must be able to read and understand blueprints, • Work safely and perform all work with quality workmanship, • Must be able to install metal stud framing, hang drywall, and acoustical ceilings, • Must have experience in the acoustical industry, • Need to be able to work well as a team and take direction from foreman and supervisors

Job Description Pay: $14.00 - $15.00 per hour Job description: Job description: Pay: $14.00 - $15.00 per hour Shift: 6am-4:30pm Shift: 5pm-3:30am Job description: Job Summary General labor is responsible for safely handling lumber products. Verifies material meets customer requirements and company expectations. Principle Duties and Responsibilities • Moves and secures lumber products and other materials according to instructions, • Stacks finished products according to predetermined bundle sizes and/or customer requirements, • Labels material based on the following specifications: type, size, and count, • Applies individual tags to material before/after treating/production, • Uses a staple gun and troubleshoots equipment, • Bands, bundles and secures material, including attaching corner protectors and loading sticks, • Follows instructions for stacking material properly and according to company policy and customer requirements, • Ensures correct quantities and material are strapped, and labeled before leaving the work area, • Maintains accurate inventory of tags and reports any problems or discrepancies to supervisor, • Records production on production sheets, • Maintains a clean and organized work area, • Assists with other work areas by moving material, loading and unloading material carts, • Participates in safety, CI and other programs and meetings, • High school diploma/GED preferred but not required, • No minimum experience is required, but manufacturing or lumber experience is preferred, • Working knowledge of basic math preferred, • Must be at least 18 years of ageCompany DescriptionSmart Resources is a strategic staffing agency that provides tailored workforce solutions across industries like manufacturing, logistics, skilled trades, and corporate recruiting. With a focus on long-term partnerships, they offer vetted talent, on-site support, and customized hiring strategies to help businesses reduce costs, improve productivity, and build reliable teams.Smart Resources is a strategic staffing agency that provides tailored workforce solutions across industries like manufacturing, logistics, skilled trades, and corporate recruiting. With a focus on long-term partnerships, they offer vetted talent, on-site support, and customized hiring strategies to help businesses reduce costs, improve productivity, and build reliable teams.

Start a fulfilling career as a Warehouse Maintenance I! We're a team. Our success is driven by the collective effort of each member in our warehouse, which has set us apart in the industry for 130+ years. We're dedicated to collectively challenging any supply chain problem with top-of-the-line technology and safety measures carried throughout the process. We wouldn't be where we are without our warehouse team. It's why we've built a culture-focused and diverse environment for you that offers opportunities for advancement with industry-leading benefits. This position is an entry-level training and development position. The Maintenance I teammate troubleshoots, repairs, and perform preventive maintenance actions on material handling equipment and other facility support systems in the distribution center environment. Benefits you can count on: • Pay rate: $19.47 per hour., • Generous benefits that start on your 60th day: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance., • Earn vacation time, and sick leave accrual from day one and paid holidays after 90 days., • 401(k) Profit Sharing Plan after 90 days., • Ensure that spare parts usage, inventory and work order actions are accurately tracked and documented according to Company policy., • Assist with DC maintenance requirements such as (but not limited to) refrigeration systems, plumbing, building lighting, welding, dock doors, air systems, racking, tote washer, and air spray painting., • Maximize availability of all classes of batteries by managing charging cycles and battery rotation., • Perform inspections and cleaning; do specific gravity checks; evaluate cable serviceability and repair damage., • Develop a working knowledge of the required aspects of the McLane Maintenance Connection database., • At least 18 years of age., • High School Diploma or GED preferred., • At least 1 year of professional experience in industrial maintenance., • At least 1 year of maintenance experience with material handling equipment., • Able to read and understand electrical schematics., • Experience with distribution center industrial equipment, including (but not limited to) forklifts, reach trucks, order pickers, tuggers, and carts., • Knowledge of OSHA regulations., • Basic computer skills with experience in a maintenance database such as MP2, DataStream 7i, or Maintenance Connection., • Organized, • Problem solver, • Teamwork oriented, • Safety conscious We've been forging our path as a leader in the distribution industry since 1894. Building an expansive nationwide network of teammates for 130+ years has allowed us to stay agile for our clients across the restaurant, retail, and e-commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing team member training, and emphasizing our people-centered culture. Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. For our complete EEO and Pay Transparency statement, please visit

Job Description Job Title: Traveling Commercial Roof Foreman Location: Various Nationwide Job Sites (Travel Required) Department: Roofing Operations Reports To: Project Manager / Superintendent Job Summary: We are seeking an experienced and dependable Traveling Commercial Roof Foreman to lead and manage roofing crews on commercial job sites across the country. The Foreman will be responsible for overseeing the daily operations on site, ensuring quality workmanship, enforcing safety compliance, and maintaining project schedules. This is a travel-based position requiring extended stays at project locations. Key Responsibilities: ·Supervise and coordinate activities of roofing crew members on commercial job sites. ·Ensure all work is performed in compliance with OSHA and company safety policies. ·Interpret and implement project plans, specifications, and details. ·Oversee daily work schedules, material deliveries, and jobsite logistics. ·Communicate effectively with project managers, contractors, and clients. ·Conduct jobsite inspections to ensure quality control and timely progress. ·Train and mentor crew members, fostering a culture of safety and accountability. ·Complete daily reports, timecards, and safety checklists. ·Travel to various job sites as assigned, often for extended periods. ·Qualifications: ·Minimum 5 years of commercial roofing experience, with at least 2 years in a foreman ·or leadership role. ·Proficient in TPO, EPDM, PVC, BUR, and/or metal roofing systems. ·Strong leadership and crew management skills. ·Ability to read detail drawings, specifications, and use digital tools for reporting. ·Excellent communication and problem-solving skills. ·Valid driver’s license and ability to pass a background check and drug test. ·Willingness and ability to travel regularly, including overnight stays. Preferred Qualifications: ·OSHA 30 certification. ·Bilingual (English/Spanish) is a plus. ·Crane, forklift, or equipment operation certifications. Working Conditions: ·Exposure to varying weather conditions. ·Frequent lifting of heavy materials and climbing ladders. ·Extended travel required (company-paid lodging, per diem provided). Compensation & Benefits: ·Competitive salary based on experience. ·Travel per diem and lodging provided. Company DescriptionMEMCO staffing was founded in 1996, we are not your everyday staffing agency, we place good people with a fitted client, 95% of your jobs are temp to perm, We take care of our clients as well as our employees.MEMCO staffing was founded in 1996, we are not your everyday staffing agency, we place good people with a fitted client, 95% of your jobs are temp to perm, We take care of our clients as well as our employees.

Job DescriptionParagon Energy Solutions Paragon is seeking an Electrical Engineering Manager to join our team! This position is responsible for leading a team of engineers, prioritizing work and interacting with internal and external customers on a daily basis. Responsibilities: • Responsible for coordinating with inside sales and the PMO to ensure work activities are planned using the appropriate resources and materials, • Responsible to develop, maintain and manage project schedules for projects less than $300k, • Support Sales & Marketing team by assisting in preparing quotes to include hours for completion, estimation of difficulty of project, and material as needed, • Mid-level position managing day-to-day activities of a group of 5-8 engineers, • Provide technical support for engineers as needed, • Assist in design and document reviews for engineering, • Assist in developing monthly shipping forecasts, • Ensure engineers adhere to the Quality Assurance Program, • Act as a liaison to outside vendors; answers questions, arrange meetings (as needed), review vendor documentation for correctness and completeness, • Recognize and drive process improvements to ensure continuous operational excellence, • Minimum of a Bachelor’s degree in Electrical Engineering is required, • Minimum of 5 years of engineering experience with a minimum of 3 years managing a technical based team is required, • 3 – 5 years of prior nuclear Commercial Grade Dedication experience highly preferred, • Must have thorough knowledge of the Nuclear/Power Generation industry to include 10CFR50 Appendix B Quality Assurance programs, NUREG and EPRI guidelines and documents along with IEEE and UL Standards, • Must possess related technical background with the ability to manage and direct a team of Engineers. Background in the functional testing and inspections of electrical, electronic and mechanical components preferred Compensation details: 116000-175000 Yearly Salary PI2f6beee4fd8b-25405-38461678

Job Description NO REMOTE WORK - On site 8 hours a day (8:30am - 5:30pm OR 9:00am to 6:00pm shift due to property's needs) Sterling Personnel is looking for an energetic and outgoing professional Bilingual (SPANISH) Leasing Superstar to show and lease apartments for several properties in North Dallas. 6 months to 1 year of previous leasing experience is preferred. Applicant must maintain a professional appearance, positive attitude and be punctual and present. Strong sales experience is required, must be able to close! The positions will be paying $17.00 - $24.00 per hr. + bonuses, health insurance and PTO once the position becomes permanent. SUMMARY: Shows and leases apartments to prospective residents and initiate marketing efforts to various merchants and businesses. ESSENTIAL DUTIES AND RESPONSIBILITIES: Include the following but are not limited to the job specifications contained herein. Leasing agent completes lease form or agreement and collects rental deposit. · Leasing agent is responsible for insuring the “model" apartments and target apartments are ready for show; responsible for maintaining work areas and office in clean and orderly manner; need to have an awareness of the “curb appeal" of the property. · Thorough knowledge of lease terms, specifications and all community policies. · Leasing agent is knowledgeable of required telephone and sales techniques. · Applicant must have knowledge of current market conditions. · Applicant must be fully informed of current rental rates, sizes, locations and amenities of the property. The ideal individual will also need to be excellent and follow up and follow through. · Applicant will maintain contact with all apartment locator services and local businesses to provide informational material. Update periodically. · Applicant is responsible for “shopping" competitive properties. · Develop full knowledge of application information required, screening processes and policies regarding rentals. · Responsible to conduct out-reach marketing at least once per week. · Develop and maintain an on-going resident retention program under direction of Property Manager. · Responsible for proper maintenance of all resident and property files. · Efficient and timely processing of all required administrative forms, reports and related information. · Applicant must be courteous and efficient in the handling of resident requests and complaints. NO FELONIES NO Misdemeanor - THEFT or/and ASSAULTS Charges Company DescriptionSterling Personnel has successfully staffed the apartment industry in the DF/W metroplex since 1985. Customer service and quality have always been the foundation for our company and is the reason for our success. At Sterling we believe in our candidates and our clients, and that is why we continually provide quality professionals to outstanding management companies and vendors. Let us assist you in finding your dream job!Sterling Personnel has successfully staffed the apartment industry in the DF/W metroplex since 1985. \r\nCustomer service and quality have always been the foundation for our company and is the reason for our success. \r\nAt Sterling we believe in our candidates and our clients, and that is why we continually provide quality professionals to outstanding management companies and vendors. Let us assist you in finding your dream job!

Customer Service Specialists work closely with wholesale and retail customers to determine their needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Store associates Customer Service Specialists are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and store. Customer Service Specialists are tasked with achieving excellent customer service, while consistently meeting the store’s sales goals. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s customers, staff, employees, vendors, contractors, and the general public. The individual selected for this role will be expected to work at Store #707230, located at: 5604 Colleyville Blvd, Ste J&K Colleyville, TX 76034 At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 – Online Application Find the role(s) that interest you on our Careers page: ___ Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 – Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You’ll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 – In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute—it matters to us. A general description of benefits offered can be found at ___. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. • Ensure high levels of customer satisfaction through excellent sales service, • Assist customers in person and over the phone by determining needs and presenting appropriate products and services, • Build productive trust relationships with wholesale and retail customers, • Process sales transactions accurately and consistent with policies and procedures, • Follow and achieve sales goals on a monthly, quarterly, and yearly basis, • Maintain precise work order files and formulas, • Pull appropriate products from the sales floor or warehouse, • Tint and mix products, as needed, to customer specifications, • Stock shelves and set up displays, • Clean store equipment, • Load/unload delivery trucks, • Assist in making deliveries, as needed, • Maintain in-stock and presentable condition assigned areas, • Remain knowledgeable on products offered and discuss available options, • Comply with inventory control procedures, • Suggest ways to improve sales Minimum Requirements:, • Must be at least eighteen (18) years of age, • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future, • Must be able to read, write, comprehend, and communicate in English, • Must be able to read, write, comprehend, and communicate in Spanish, • Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion, • Have a valid, unrestricted Driver’s License, • Have at least a High School diploma or GED, • Have at least one (1) year experience working in a delivery, retail, or customer service position, • Have previous work experience selling paint and paint related products, • Have previous work experience operating tinting and mixing equipment #SHWSalesBL

Customer Service Specialists work closely with wholesale and retail customers to determine their needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Store associates Customer Service Specialists are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and store. Customer Service Specialists are tasked with achieving excellent customer service, while consistently meeting the store’s sales goals. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s customers, staff, employees, vendors, contractors, and the general public. The individual selected for this role will be expected to work at Store #707230, located at: 5604 Colleyville Blvd, Ste J&K Colleyville, TX 76034 At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 – Online Application Find the role(s) that interest you on our Careers page: ___ Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 – Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You’ll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 – In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute—it matters to us. A general description of benefits offered can be found at ___. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. • Ensure high levels of customer satisfaction through excellent sales service, • Assist customers in person and over the phone by determining needs and presenting appropriate products and services, • Build productive trust relationships with wholesale and retail customers, • Process sales transactions accurately and consistent with policies and procedures, • Follow and achieve sales goals on a monthly, quarterly, and yearly basis, • Maintain precise work order files and formulas, • Pull appropriate products from the sales floor or warehouse, • Tint and mix products, as needed, to customer specifications, • Stock shelves and set up displays, • Clean store equipment, • Load/unload delivery trucks, • Assist in making deliveries, as needed, • Maintain in-stock and presentable condition assigned areas, • Remain knowledgeable on products offered and discuss available options, • Comply with inventory control procedures, • Suggest ways to improve sales Minimum Requirements:, • Must be at least eighteen (18) years of age, • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future, • Must be able to read, write, comprehend, and communicate in English, • Must be able to read, write, comprehend, and communicate in Spanish, • Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion, • Have a valid, unrestricted Driver’s License, • Have at least a High School diploma or GED, • Have at least one (1) year experience working in a delivery, retail, or customer service position, • Have previous work experience selling paint and paint related products, • Have previous work experience operating tinting and mixing equipment #SHWSalesBL

Job Description Journeyman Electrician Job Responsibilities and Duties • Interprets technical drawings to determine the layout of electrical systems, • Diagnoses and troubleshoots faulty wiring, • Runs tests on generators and other backup systems, • Leads compliance with OSHA and other applicable standards, • Checks for and deploy upgrades of electrical components, • Documents problems and prepares reports, • Relevant hands-on experience preferred, • Electrician license or certification, • In-depth knowledge of electrical principles, construction, wiring schematics, • Deep understanding of the National Electrical Code (NEC) and other safety standards, • Strong analytical and organizational skills, • Excellent verbal and written communication skills Installation: Installing electrical wiring, fixtures, outlets, and other components based on blueprints and specifications. * Maintenance: Performing routine checks and maintenance on electrical systems and equipment to ensure proper functioning. * Repair: Diagnosing and repairing electrical malfunctions and faults in various systems. * Troubleshooting: Identifying and resolving electrical problems using various tools and techniques. * Safety Compliance: Ensuring all work adheres to safety codes and regulations. * Supervision: May supervise and train apprentices or other junior electricians. * Customer Interaction: Communicating with clients about electrical needs, providing estimates, and discussing solutions. * Material Management: Keeping track of inventory, ordering necessary parts, and managing tools and equipment. Company DescriptionSmall Company looking for people with drive and great work ethic. We have lots of work and you are guaranteed 40 hours a week. Paid vacation, holiday and sick pay.Small Company looking for people with drive and great work ethic. We have lots of work and you are guaranteed 40 hours a week. Paid vacation, holiday and sick pay.

Job Description We are seeking an experienced Electrical Superintendent to join our team! The ideal candidate will have 4 or more years experience in the construction field. We have been in business for over 25 years and are a medium sized company that only works in the commercial construction field. We are seeking someone who can oversee project planning, scheduling, budgeting, and implementation. Responsibilities: • Oversee all aspects of construction project from planning to implementation, • Supervise onsite personnel and subcontractors, • interface with project inspectors, contractors, engineers, owner, and architect, • Maintain high standards of workmanship that adhere to original plans and specifications, • Familiar with subcontractor partner subcontracts and scope of work, • Responsible for the projects financial success, • Understanding of all projects general conditions and general requirements, • Generate RFI's as required to ensure completeness of the project documents and identify and clarify any discrepancies, • Manage and enforce safety practices daily, • Able to read blueprints, • Manpower management, • Previous experience in construction management or related field, • Familiar with construction management software, • Strong leadership qualities, • Deadline and detail oriented Please apply if you thin you would be a great fit!

Job Description Summary The Helper assists the Machine Operator in production. Job Responsibilities • Follow Machine Operator’s instructions., • Keep area clean and organized., • Assist Crane Operator with loading material. STRENGTH RATING: Very Heavy Work - Exerting in excess of 100 pounds of force frequently (1/3 to 2/3 of the time) and/or in excess of 20 pounds of force constantly (2/3 or more of the time) to move objects. DEMANDS: Each of these physical activities is essential to the job occasionally to frequently: Standing, walking, sitting, lifting, carrying, pushing, pulling, climbing, balancing, stooping/bending, reaching, handling and feeling. ENVIRONMENTAL CONDITIONS: Occasional exposure to outside weather conditions. NOISE INTENSITY LEVEL: Moderate POSITION REQUIREMENTS Minimum Qualifications • High school diploma or equivalent is preferred., • Good communication (written and verbal) skills and the ability to speak read and write Basic English., • Ability to add, subtract, multiply, and divide., • Must be a self-motivated, dependable, team oriented person with a positive Can Do attitude who can be effective under pressure., • Ability to work as a team with other personnel assigned to the job, • 6 months consecutive experience in production is ideal, but not required, • Willingness to work overtime., • Participate in insuring a safe work environment through promoting all company safety policies., • Ability to be patient, calm, and helpful with internal and external customers to resolve issues constructively., • 6 months Forklift Driver experience preferred, but not required, • High School Diploma/GED is preferred, but not required, • Ability to comprehend and implement oral instructions quickly., • Ability to perform mathematical calculations and to comprehend measurements, • Good eyesight or wear corrective lenses as seeing is essential to the job. Applicant must be able to have clear vision at 20 feet or more and have good depth perception to judge distance and space relationships., • Ability to read a tape measure., • Knowledge of compass directions.

Job Description Smith Personnel is currently sourcing for skill CNC Mill operators for a large manufacturing facility in South Fort Worth. 2nd shift: 2pm-10:30pm / will train 1st shift Job Description: A Mill Operator's primary responsibility is operating and maintaining milling machines to shape and cut materials into specific forms, ensuring quality and consistency of output. This involves setting up machines, monitoring the process, adjusting as needed, and inspecting finished products. Responsibilities: The essential functions of this position will include, but not be limited to, oversight and execution of the following: • Machine Setup: Setting up milling machines according to job specifications, including selecting the appropriate tools, configuring settings, and performing test runs., • Operation Monitoring: Continuously monitoring the milling process to ensure accurate shaping and cutting, adjusting as necessary to maintain quality., • Quality Assurance: Inspecting finished products for defects and conformity to specifications., • Material Handling: Loading and unloading materials into the milling equipment., • Safety: Adhering to safety protocols and environmental regulations. To perform this job successfully, an individual must be able to perform each essential duty satisfactory: · High school diploma or equivalent (bachelor’s degree or certification in related field preferred). · 1 – 3 years of experience in manufacturing and operations is required. o Forging and forging tooling & design is desired. o Experience in the aerospace industry is strongly preferred. · Ability to read and comprehend a variety of instructions and standard operating procedures. · Strong analytical skills and practical problem-solving skills. · Excellent oral and written communication skills o Working with management and making presentations will be required. · Self-motivated and ability to work well with others. Company DescriptionSmith Personnel offers a variety of career opportunities to choose from. Our Staffing Coordinators will work with you to find the ideal job that fits your personal goals. SMITH uses Job Matching Tools to match your abilities and interests ensuring that your talent is utilized to its fullest potential.Smith Personnel offers a variety of career opportunities to choose from.\r\nOur Staffing Coordinators will work with you to find the ideal job that fits your personal goals. SMITH uses Job Matching Tools to match your abilities and interests ensuring that your talent is utilized to its fullest potential.

Job Description Staff-Up is seeking a Construction Equipment Mechanic for a large construction material business in Fort Worth, TX 76106! Pay Rate: $34.00 NOTE: MUST HAVE CONSTRUCTION EQUIPMENT MAINTENANCE EXPERIENCE!! Job description: This position requires the level of knowledge, skills, and tools necessary to diagnose and repair all makes of medium & heavy-duty construction equipment. Some duties include removing, cleaning, repairing, reinstalling, and adjusting vehicle components, including engine components, fuel systems, and the like. Duties And Responsibilities: • Inspect and repair construction equipment such as Skid Steers, Excavators, Curb Saws., • Must have own tools!, • Inspect and repair forklifts, tractors, and trailers, • Perform all required maintenance inspections and safety checks as required, • Help service customers with their equipment, • Troubleshoot and submit repair bids to Service Manager, • Ability to read and understand schematics, • High School Diploma or GED, • Computer-assisted troubleshooting experience, • Construction Equipment and vehicle maintenance, • Must be able to lift 75 pounds, full use of arms to hands to use tools, must be able to climb up and off equipment and be able to see close as well as distant, • Requires a valid and current driver’s license

We are seeking experienced Crew Leaders to work safely in the field for our Enhancement division. You will be a working team member who oversees all aspects of a crew from start to completion. What would my responsibilities be? · Supervise all Enhancement activities of the crew, ensuring that all crew members have the required safety material, the training and tools needed to complete the job, and that they are always operating safely. · Complete a pre-trip inspection report each day. · Coordinate with branch management, customers, and employees as needed. · Use Install tools and operate heavy equipment as needed. Safely drive crews to and from jobs, adhering to the Company's Safety Policy and ensuring that the public will be safe while in contact with crews. · **Candidates with experience in masonry, flat work, pavers, and retaining walls are desired. Why Join Yellowstone? · Competitive hourly pay, paid weekly · Benefits package including health, dental and vision insurance, 401k with a company match paid time off, and holiday pay · Industry-leading safety programs · Company provided safety gear · Equipped with optimal and most professional equipment · High profile customers, worksites, and landscape results -A company that values and appreciates YOU Requirements · Legal authorization to work in the United States · Experience managing a crew consisting of laborers providing landscaping installation or related services · Must have reliable transportation to the Branch or first job site · Safe driving record and ability to successfully pass a Motor Vehicle Report (“MVR”) required · Strong English communication skills. Spanish a plus Become part of the team dedicated to Excellence in Commercial Landscaping

Job Description As an Instructor, you will provide your students with the skills and knowledge necessary to obtain entry-level employment in their field of study. In our collaborative environment, you will prepare students with the knowledge, skills, and work habits for a successful career. Instructors will ensure ethical conduct, sound educational practices, and the academic development of each student, with focus on the mission and core values of the campus. In this position, the Instructor delivers the approved curriculum to help students achieve their educational and career goals. Instructors will also manage their classrooms and promote a positive and engaging learning experience, provide support, tutoring and other assistance as needed. Instructors are to “model" the professional behaviors, language, and activities expected of our students. ESSENTIAL FUNCTIONS • Utilize classroom and lab instruction, student assessment mechanisms, and classroom management techniques to provide an engaged classroom experience to students, • Guarantee that student has been presented with the material to successfully meet the learning objectives of each course within a student’s program of study, • Provide the student with timely information and feedback on his/her academic progress relative to quizzes, tests, homework and projects, • Ensure that instructional materials and equipment are ready for student use, sufficient in quantity, are properly maintained and are in working order prior to class time, • Participate in ongoing faculty assessment and professional development activities to ensure an active and engaged classroom experience for all students; maintain required certification and license, • Possess a thorough knowledge and understanding of all school policies, and actively participate in their implementation and enforcement, • Actively participate in meetings, review and analyze assessment data, compile reports, and meet academic and administrative deadlines, • Ensure campus compliance with all federal, state, and regulatory bodies’ guidelines, along with internal policies of the company, • High school diploma, GED, and/or proof of completion of related vocational training program., • Verifiable work experience: Five years verifiable industry experience within the last ten years, • Must be certified or licensed where required by law, • Strong written, oral, and interpersonal communication skills with demonstrated success in collaborating with diverse groups of employees and customers, • Demonstration of highest levels of integrity and professionalism in all aspects, including appearance, demeanor, and attitude, • Ability to work in an observation/coaching style environment, • Capability to prioritize, accept responsibility, and work within deadlines, • Superior organizational and problem-resolution skills, • Demonstrated commitment to customer service, • Prior experience teaching in a proprietary education setting and/or experience with training employees within the industry., • Knowledge of federal, state, and accreditation regulations applicable to the proprietary education industry Ancora Education is committed to creating a diverse and inclusive work environment. We are an equal opportunity employer that maintains a policy of nondiscrimination with respect to all employees and applicants for employment. All employment decisions are made without regard to individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law.

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC JR. MECHANIC JOB RESPONSIBILITIES & REQUIREMENTS As an HVAC Apprentice you will assist experienced technicians with installing, maintaining, and repairing heating, ventilation, and air conditioning systems for a company that handles service work and site maintenance for national accounts. • Assist in the servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources, • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • A strong willingness to learn and a positive attitude are crucial, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED:, • Medical Insurance, • Dental Insurance, • Paid Vacations 4OkGrymtuf

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC SERVICE TECHNICIAN Job Responsibilities & Requirements HVAC Service Tech for company that handles service work and site maintenance for national accounts. • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations Vdz1CUmz1M

Job Description Salary: $34.00 to $38.00 per hour HVAC Mechanic - Harris Methodist Hospital - 1st Shift Crothall Healthcare is a Compass One Company that provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 1300 healthcare service teams in 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013 and Becker's Top 150 Places to Work since 2016. A division of Compass Group USA, we have more than 26,000 team members. Our core services include: Environmental Services, Healthcare Technology Solutions, Patient Transportation, Laundry & Linen, Facilities Management, and Ambulatory EVS. Learn more at . Job Summary The HVAC Maintenance Mechanic performs a variety of skilled maintenance duties related to the facilities engineering and maintenance departments. This is a first shift 7am to 3:30pm M-F schedule. Responsibilities: Updates work statuses and documents tasks completed in the CMMS using a mobile device. Helps settle staff, material needs, and timelines for jobs and projects. Cleans, lubricates, services, repairs, and diagnoses malfunction of HVAC, electrical and mechanical building systems, sterilizers, food service equipment, sprinkler and standpipe systems, transport systems, electronic signaling systems, fire alarm systems and similar plant and specialty equipment items Assists in making decisions on all repairs and reports major problems to the Manger as appropriate. Constructs, finishes, installs, maintains, and repairs electrical and mechanical systems, or the facilities of any related systems, using power & hand tools and other vital equipment. Reviews outside vendor projects and makes punch lists. Analyzes and corrects sophisticated building system problems and electro/mechanical problems related to utilities. Supports project management activity as needed. Responds to emergency problems in the facility and makes emergency repairs as needed. Maintains logs, performs rounds, and completes P.M. work orders, tests, and inspections. Makes recommendations for modification or improvement of preventive maintenance systems. Maintains shops and mechanical areas in a clean and safe manner. Preforms other duties as assigned. Qualifications: 5 years’ experience as a Maintenance Mechanic in an institutional setting in an engineering or maintenance subject area. HVAC certification or license highly preferred. Experience working with blueprints and schematics. A general understanding of electro-mechanical equipment. Rudimentary ability to apply hand-operated construction equipment. Ability to repeatedly lift 50 pounds and kneel/bend/stoop and perform strenuous labor for extended periods of time. Apply to Crothall today! Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1459219 Crothall Healthcare RANDY ERPELDING [[req_classification]]

Job DescriptionDescription: We are currently seeking a Maintenance Technician to join our team! You will be responsible for completing work orders and other required tasks. This schedule is Monday thru Friday from 5pm-130am with OT as needed. Responsibilities: • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service., • Perform simple machinist duties and responsibilities., • Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test and make adjustments., • Perform regular preventive maintenance on machines, equipment and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Detect faulty operations, defective material and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas, • High school diploma or equivalent preferred but not required, • Minimum of one (1) year experience in window & door manufacturing or related field preferred but not required., • Technical Capacity, • Ethical Conduct, • Communication Proficiency, • Results Driven, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. NT Window is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate based on race, color, religion, sex (including sexual orientation and gender identity), national origin, age, disability, veteran status, or any other protected status under applicable laws. Requirements:

Job DescriptionJob description In our world, “high ticket” is anything with a price point of about $10k or above. We firmly believe that some of the most talented sales professionals in the world are underpaid because they’re in the wrong vehicle selling the wrong product. We take pride in seeking out top talent, developing them further into highly trained closers, and enabling them to reach new levels of earning potential through high ticket sales with WFS Group. Put simply, there are a handful of things a sales role needs to provide for you to maximize earning potential: high quality leads, high deal velocity, high average sales price, short sales cycle, a strong commission structure, and solid systems & training to support you; we provide all of that. If your current position is missing any one of those key elements, you owe it to yourself to apply and find out for yourself. Competitive Commission Structure & Earning Potential! Selling Life Changing Products! Inbound Leads from Word Class Marketing! A Snapshot of WFS Group: WFS Group is a fast paced, high performance sales agency that provides what is referred to as “done for you sales” services to our clients. Think of a lead generation based marketing agency…. But focused on sales! Put simply, our clients outsource their sales department to us and we sell their services/packages to help them scale faster than ever before while changing as many people’s lives as possible. The main verticals we service are in the online, digital marketing based community with companies that have educational programs that teach high paying skill sets which is referred to as “alternative education.” We sell a range of transformative programs and packages including everything from business consulting programs, to programs that teach people how to invest in real estate, learn mergers and acquisitions and many many more. The world is changing and so is the education space with college application and admission rates down significantly. Bespoke alternative education is a multi billion dollar a year industry and growing, and you can be a part of the gold rush. We believe people’s dream lives are just on the other side of receiving the right information- we’re responsible for getting that to them. Position Overview: We’re looking for top performing sales professionals that are grateful to wake up to a full calendar of leads and are addicted to chasing the rush of the deal! This role is a closer position which will primarily consist of taking inbound scheduled sales calls generated from our marketing efforts, taking the leads through the WFS proprietary selling framework, managing your pipeline, and maximizing revenue by generating sales. Although this role is NOT an outbound role, we are NOT looking for lazy closers. We want hungry, ambitious, and grateful closers that aren’t afraid to dial additional opportunities in between scheduled calls. If you are a self-motivated and growth-driven individual, we encourage you to apply for this opportunity. Why High Ticket Closers LOVE WFS Group: * Fully location independent (remote position) * Set your own hours, manage your own calendar * $10-15k average deal value * 10-14 day average sales cycle * Consistent inbound lead flow * Huge earning potential for those that are willing to hustle * Word class sales training & weekly team coaching * High Performance Culture (A players only) * Offers that change our customers lives!! Responsibilities: * Consistently increase product knowledge by consuming the content in the sales training center. * Participate in daily sales syncs via zoom to discuss sales initiatives, study sales call game tape, and strategize around the pipeline. * Follow the WFS proprietary selling framework to take leads through the sales process (training provided). * Engage in deep question led discovery dialogue to identity challenges, pain points, and gaps that create the need, desire, & urgency for WFS products and services. * Build and maintain relationships with leads, using a consultative sales approach to understand their goals, objectives, and dominant buying motives. * Utilize WFS sales material & tools to deliver persuasive sales presentations via zoom that speak to core desires, highlighting the key benefits and value of WFS products and services. * Achieve or exceed sales quotas and targets, consistently meeting or exceeding sales performance expectations. * Adhere to CRM best practices to track and manage sales activities, including lead management, follow-up, and accurate forecasting. * Collaborate with cross-functional teams to ensure a seamless and successful sales process. * Display WFS core values at all times to contribute to a high performance culture. Requirements: * 2 years of previous experience in high ticket sales or consultative sales process, with a proven track record of closing deals and driving revenue. * Effective communication and presentation skills. * Self-starter with a strong drive for success. * Ability to work independently and manage time effectively. * Excellent people skills with the ability to create rapport. * Experience and working knowledge of CRM systems. You SHOULD apply if: * KNOW you were born to be a top producer/top earner * You have extensive experience in phone/zoom sales * You’re hungry with tenacity and not a spoiled lazy closer * Bring energy and enthusiasm to every room you’re in * You’re a strategic individual and thoroughly enjoy the sales process * You’re extremely coachable and disciplined * You can learn and adapt quickly in a fast paced sales environment * You have advanced sales experience * You consider yourself to be of the most elite sales professionals out You should NOT apply if: * Aren’t all of the things listed above * Can’t commit to learning our systems, processes, and offer * Don’t work well in a structured team setting with other top performers * Don’t have amazing communication skills * Are a one trick pony and not a dynamic individual * Get stressed out in fast paced operations * NEED results overnight * Don’t have legit sales experience * Are lying about your experience Job Type: Full-time Pay: $90,000.00 - $140,000.00 per year This position is an Independent Contractor Role - 1099 Flexible Schedule: * Monday to Friday Work Location: Remote Compensation Range: $90K - $240K

Job Description Longhorn, Inc. is a 3rd generation independent and family owned wholesale supplier of irrigation, landscape, wastewater, lawn equipment, and outdoor lighting. We have been providing materials to contractors and installers in the state of Texas for over 43 years! We are currently seeking hardworking individuals to fill an open full-time position at our location in Mansfield, Texas. We are seeking someone who can drive our trucks for us, as well as serve as a general warehouse employee, potentially growing towards development into an inside sales operative at the Longhorn Irrigation sales counter. The ideal candidate would perform various duties including: • Delivering material to job site locations and to our other Longhorn locations, • Operating a forklift in our warehouse and pipeyard, • Receiving purchase orders and transfers, • Pulling and preparing orders and transfers, • General Warehouse Maintenance and Cleaning, • Shipping and receiving inventory, • Learning to take and write sales orders, • Processing Payments Training will be provided. Benefit Package including 401k, dental, medical, vision, and Bonus structure Full time position with available Overtime Please respond to this ad via ZipRecruiter, email , call the Mansfield location at 817-225-2725, or stop by the store at 106 Sentry Drive, Mansfield, TX 76063 to request an application in person.

Job DescriptionAbout O’Hara’s Son Roofing Company Since 1987, O’Hara’s Son Roofing (OSR) has provided new commercial roof construction, commercial roof replacement, commercial leak repair service, and preventative maintenance for commercial roofs. Headquartered in Chicago, IL, our team of 100+ employees is dedicated to providing quality work with a strong focus on safety and communication. As of 2025, OSR ranks among the Top 20 Roofing Contractors in the country. We specialize in the installation of numerous styles of roof applications and coatings. Additionally, we provide extensive roof repairs, OSHA-compliant safety items, and renewable energy solutions. OSR maintains branches throughout the country, providing timely service and maintenance to our partners in each region of the United States. Join Our Dynamic Team and Embrace Our Core Values! At O’Hara’s Son Roofing (OSR), we believe in “Putting the Pedal to the Metal,” driving our success forward by continuously improving and never settling for average work. As a family-oriented company, we embrace a "No Jerk Zone," fostering an environment of respect, support, and teamwork at every level. We value self-starters who take pride in their work, go above and beyond for the team, and seize opportunities to shape their future with us. If you share our commitment to doing all the little things well and being our customers' preferred roofing contractor, we invite you to apply. Job Description As a Regional Service Technician, your home office is located more than 240 miles from a Branch. You will be responsible for performing inspections, repairs, and maintenance on commercial roofing systems. Your expertise in roofing techniques, problem-solving abilities, and commitment to quality workmanship will contribute to the success and reputation of our company. Responsibilities • Roofing Inspections and Assessments:, • Conduct thorough inspections of commercial roofing systems to identify and assess any issues or areas of concern., • Document findings and prepare detailed reports outlining the condition of the roof and recommended repair or maintenance actions., • Utilize appropriate tools and equipment to perform inspections, including thermal imaging devices, moisture meters, and visual assessments., • Identify and address potential safety hazards and make recommendations for corrective measures., • Roofing Repairs and Maintenance:, • Perform repairs and maintenance on various types of commercial roofing systems, including flat roofs, metal roofs, and shingle roofs., • Diagnose and troubleshoot roofing issues, such as leaks, punctures, and damaged flashing., • Replace or repair damaged roofing materials, including membranes, shingles, insulation, and flashings., • Apply appropriate sealants and coatings to ensure the integrity and waterproofing of the roofing system., • Adhere to safety guidelines and use proper safety equipment while performing repairs., • Safety and Quality Assurance:, • Adhere to safety policies and protocols to prevent accidents and ensure a safe work environment., • Follow industry best practices and company standards to deliver high-quality roofing installations and repairs., • Conduct quality inspections to verify that work meets established standards and specifications., • Identify and report any issues or deficiencies in roofing systems, materials, or installations., • Equipment and Material Handling:, • Safely operate and maintain tools, equipment, and machinery used in roofing installations and repairs., • Ensure proper care and storage of tools and equipment to maintain their functionality and longevity., • Assist in the inventory management of roofing materials and supplies., • Coordinate with the supervisor or project manager to ensure the availability of necessary materials and equipment for each project., • Work Order Execution:, • Review and interpret work orders, ensuring accurate understanding of the required tasks and timelines., • Coordinate with managers and coordinators to schedule and prioritize service requests., • Gather and organize the necessary materials, tools, and equipment for each assigned job., • Efficiently execute work orders, adhering to project specifications, industry standards, and company policies., • Customer Service:, • Communicate with customers in a professional and courteous manner, addressing their questions, concerns, and needs., • Provide clear explanations of work performed and recommendations for further actions or maintenance., • Ensure customer satisfaction by delivering high-quality workmanship and excellent customer service., • Maintain a clean and organized work area, respecting the customer's property and minimizing disruption., • Documentation and Communication:, • Utilize our service software platform to accurately record and document all service, activities, including repairs, materials used, and time spent on each project., • Maintain awareness of timing; check-in and out for work orders will occur with GPS-enabled company-issued device., • Complete required paperwork, including work orders, time sheets, and inspection reports accurately and in a timely manner., • Communicate effectively with team members, supervisors, and clients regarding project progress, issues, and any necessary updates., • Provide recommendations and suggestions for improving processes, procedures, and work methods., • Attend virtual team connection meetings with direct supervisor., • Safety and Professional Development:, • Stay updated on the latest industry trends, techniques, and safety practices through ongoing training and professional development opportunities., • Comply with company safety policies and procedures, including wearing personal protective equipment (PPE) and following safe work practices., • Additional Responsibilities:, • Handle additional responsibilities and projects as assigned.Requirements, • High school diploma or equivalent., • Minimum of 2 years of experience in commercial roofing installation, repair, or maintenance., • Extensive knowledge of commercial roofing systems, materials, and repair techniques., • Proficient in using various roofing tools, equipment, and safety procedures., • Ability to interpret work orders, specifications, and technical drawings., • Strong problem-solving and troubleshooting skills., • Physical stamina and ability to work at heights and in various weather conditions., • Ability to climb a 40-foot ladder and lift heavy objects., • Willingness to travel as required., • Ability to travel long-distance throughout the year., • Excellent communication and customer service skills., • Team player attitude is a must., • Valid driver's license and clean driving record., • Flexible Work Environment, • 40 Hours PTO per Year + Paid Holidays (First Year), • 80 Hours PTO per Year + Paid Holidays (Following One Year), • Safety Equipment, • Medical Benefits - Partial Contribution:, • Medical Insurance: Aetna (EPO, PPO, & PPO HSA), • Dental Insurance: Aetna (PPO), • Vision Insurance: Guardian Insurance, • Retirement:, • 401k with up to 4% company match - after 1 year of continuous employment and 1000 hours worked, • Non-Contributory Benefits - Employer Paid:, • Life Insurance, • Accidental Death & Dismemberment (AD&D), • Short Term Disability (STD) Please, complete our online job application and send your resume in PDF format, including a personal email address, and mobile number where we can text or leave voicemails for you during regular business hours (8-5 pm CST). We appreciate your time and consideration of this career opportunity. Please, contact us with any additional questions at . The preceding job description has been designed to indicate the general nature and level of work to be performed. It is not meant to be interpreted as a comprehensive inventory of all duties and responsibilities required of employees assigned to this job. O’Hara’s Son Roofing is an Equal Employment Opportunity and E-Verify compliant Employer. Our company is a Drug Free Workplace. Candidates must be authorized to work in the U.S.

Job Description General Summary This position is responsible for installation and maintenance of injection molding production machinery such as horizontal injection molding machines, 3 axis robots, automated cells, material loaders, material dryers, water chillers, temperature control units, hot runner controllers, end of arm tooling, etc. Must be able to maintain the equipment in good working condition and to execute planned maintenance and corrective maintenance. Analyze our existing custom production machinery for areas of improvement, designing necessary custom parts for the machinery, and working with the Injection Molding Department to design the most efficient production layout in our new facility. This position is also responsible for tooling changes as well as preventive maintenance and minor repairs of injection molding tooling. Duties and Responsibilities (essential duties are italicized) 1. Performs preventive maintenance as scheduled following the proper lock out tag out procedures., 2. Performs corrective or reactive maintenance when a line is down., 3. Assists with changeovers of the machines as scheduled to accommodate the production schedule., 4. Adjusts the machines as necessary to maintain the productivity on the machines., 5. Leads and supports continuous improvement projects., 6. Supports new employees on the proper training of using, troubleshooting and maintaining the machinery., 7. Keep the spare parts and maintenance work bench and tool carts in order, clean and safe., 8. Support the safety committee to ensure all the guidelines and regulations are being followed, 9. Responsible for machine safety and proper operation., 10. Help during the startup and shutdown procedures in production, 11. Fill out the proper documentation when performing adjustments, preventive or reactive maintenance., 12. Waste disposal management and proper documentation, 13. Assist with facilities maintenance as needed, 14. Performs in a manner consistent with company Core Values and Purpose., 15. Attends all scheduled meetings, missing no more than 10% annually., 16. Clocks in and out for work and lunch with no more than 1 error per month., 17. Provides excellent customer service., 18. Follows all OSHA and other safety guidelines., 19. Actively demonstrates teamwork at all times., 20. Manages any stress on the job, including but not limited to meeting deadlines., 21. Adheres to company safety standards at all times, such that no serious (requiring medical attention) injury occurred during the prior 12-month period., 22. Follows other policies and procedures such that there are no verbal or written warnings during the evaluation period. The duties described above are not inclusive. Additional duties may be permanently assigned or required from time to time due to the need to respond to customer needs and remain competitive in the marketplace. Minimum Knowledge, Skills, and Abilities Required Work environment characteristics described here are representative of those that must be met by a Team Member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 1. High school diploma or equivalent. 2.At least 2 years experience working in a plastic transformation process such as injection molding, extrusion or blow molding and preferably exposed to machinery brands such as ARBURG, Wittman and SEPRO 3. At least 2 years’ experience in a production environment repairing and maintaining injection molding machinery, injection molding tooling, robotic automation systems., 4. Excellent understanding of predictive and preventative maintenance processes., 5. Mechanical skills needed to perform maintenance and must have proven experience and ability in mechanical, electrical and electronic maintenance troubleshooting techniques., 6. Able to demonstrate working knowledge of mechanical/electrical principles/concepts., 7. Able to read/comprehend instructions given through electronic/mechanical instruction books, including electric, electronic, pneumatic and hydraulic diagrams., 8. Familiarity with implementing or maintaining equipment and facilities based on ISO9001 or 13485., 9. Fluently speak, read, and write English., 10. Skilled in time management., 11. Skilled in multi-tasking., 12. Demonstrated customer problem solving skills., 13. Ability to work with minimal supervision., 14. Ability to learn and perform primary functions of positions within department., 15. Ability to manage stress., 16. Ability to meet physical demands of the job which include, but are not limited to: walking; bending; pushing; pulling; sitting for extended periods of time at a desk using a computer, phone and headset; and occasionally lifting and carrying items which may weigh up to 50 pounds., 17. Position spends approximately 100% of time moving about the production area including walking, standing, sitting, squatting, reaching, twisting, and leaning., 18. Vision and hearing must be within or correctable to within normal range., 19. Must work from the corporate office and be able to work on time on a regular basis during regular business hours. Must be available for evening/weekend work as needed., 20. While performing the duties of this job, the Team Member is exposed to production equipment at various times. The noise level in the work environment is usually moderate. This position starts at $23.00- $25.00 per hour depending upon experience. This position is 100% onsite at our Arlington location. This is a B shift position, hours are 2:00pm-10:30pm M-F with occasional Saturday OT.

Job Description Title: Maintenance Technician Reports to : Maintenance Supervisor Job Purpose : Ultimately responsible for preventative and diagnostic maintenance of equipment. Key Responsibilities and Accountabilities : * Perform highly diversified duties to install and maintain production machinery and facility equipment * Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of machinery * Support with machine improvement and the installation of new equipment * Must have controls, robot programming, and automation experience * Complete TPM activities on workshop equipment * Read and interpret equipment manuals and blueprints to perform required maintenance and service * Use a variety of hand and power tools, electric meters and material handling equipment in performing duties * Perform other duties as required or assigned by supervisor * Follow all OSHA and internal safety standards Key Measures of Success * Safety Record * OEE * Continuous Improvement Activity * Machine Uptime * PM Completion % Qualifications: * High School Diploma, GED, or equivalent work experience * Technical certification in mechanical, electrical, or other technical field preferred * 3-5 years verifiable experience in Industrial Maintenance * Specific experience maintaining stamping presses preferred * Strong electrical and mechanical troubleshooting skills * Well versed in standard preventative maintenance protocols * Proficient in use of hand tools, power tools, shop equipment and appropriate PPE * Proficient in metal cutting, welding, drilling and tapping * Working knowledge of PLC and relay logic control systems * Working knowledge of hydraulic and pneumatic devices and controls * Working knowledge of electrical distribution systems and LOTO procedures * Previous experience maintaining air compressors a plus * Previous experience programming automated equipment including robots * Ability to perform active job duties that require standing, walking, bending, kneeling, stooping, crouching, crawling and climbing * Ability to lift and/or move 50 lbs Phoenix Stamping Group, LLC offers a drug-free work place along with a competitive salary and benefits package. We are an equal opportunity employer (EEO), dedicated to a policy of nondiscrimination in employment on any basis including race, creed, color, age, sex, religion, sexual orientation, gender identity, or national origin and in compliance with ADAAA. You should be proficient in: • Creating Preventive Maintenance Plans, • Heavy Equipment Repair, • Mechanical Troubleshooting Skills, • 120/208/240/480 Voltage Systems, • Electrical Installation, • Electrical Troubleshooting, • Electrical Repair, • Troubleshooting Industrial Automation Equipment $30 - $35 / hr

Job Description Salary: [[cust_PostingPayRange]] Other Forms of Compensation: [[otherFormsComp]] Pay Grade: [[payGrade_obj]] Crothall Healthcare is a Compass One Company that provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 1300 healthcare service teams in 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013 and Becker's Top 150 Places to Work since 2016. A division of Compass Group USA, we have more than 26,000 team members. Our core services include: Environmental Services, Healthcare Technology Solutions, Patient Transportation, Laundry & Linen, Facilities Management, and Ambulatory EVS. Learn more at . Job Summary Summary: Installs and maintains interior and exterior building wall finishes and surfaces with paint, coatings, wall coverings, plaster and other repair materials. Removes and installs wall trim and cove base materials, or other accessory items as needed to complete the work professionally and safely. Essential Duties and Responsibilities: • Selects proper tools and equipment including, but not limited to, paints, brushes, rollers, spray guns, drop cloths, rags, ladders, scaffolds, tape, cleaning materials, etc., • Selects pre-mixed paints or prepares paints to match specific colors by blending and mixing required proportions of pigment, oil, and thinning and drying substances., • Transports material and equipment to the job site or arranges for the transport of heavy or bulky items., • Prepares site by covering furniture, equipment and floors with drop cloths and masking doors, windows and other trim where required., • Prepares surfaces including cleaning, minor repair and patching of metals, wood, masonry, and polishing of finished surfaces and glazing as necessary. Installs, removes, and replaces cove bases, ceiling tiles, wall mounted items, and similar accessory items needed to achieve a complete and finished appearance., • Performs caulking, sanding, taping, application of special finishes and color matching, waxing and polishing of finished surfaces and glazing as necessary., • Makes minor repairs to spray and roller equipment, simulates wood grain, marble, brick or tile effects., • Recommends substitute materials or colors to improve and expedite work., • Requisitions and receives materials and equipment, and maintains simple records and time reports., • Cuts stencils and stencil surfaces with lettering or decorations., • Paints signs on such surfaces as cloth, bulletin boards, walls, doors, equipment, etc., • Installs wall coverings and similarly applied materials., • Freehands highlighting, shading and counter-shading and apply stipple & glaze finishes., • Removes, repairs and installs ceramic tile floors, walls and ceilings., • Tapes and spackles drywall in preparation for painting., • Fills nail holes, cracks and joints with putty, plaster or other filler., • Performs other duties as assigned. Qualifications: • 1 year of trade school or 2 years of experience as Painter in a similar sized institution., • Some lifting of medium and/or heavy equipment and tools. Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1463145 Crothall Healthcare RANDY ERPELDING [[req_classification]]

Job Description Summary of Position: Traveling Multifamily Superintendent Position: Lead Multifamily Superintendent (TX & Southeast Travel) Salary Range: ~$130,000/year salary + Bonus + Perdiem & Auto Allowance ( Benefits in addition to compensation) Project Size: $40+ Million Garden Style Apartment with Duplex development. ABOUT US - Why You Should Work With Us: Our Client's Company is a national builder of Class A multifamily assets across the U.S. and is one of the most active multifamily builders in Southeast region. Headquartered in Nashville TN, Our Company has over a 50-year history of successful developments throughout major U.S. markets. Our Company stands among the most active privately held real estate companies in the country. Our executive leadership team has an average of 50 years of comprehensive experience in multifamily projects– ranging from low-density garden apartments and mid- to high-density wrap and podium projects to student-living housing projects and mixed-use developments. Position Summary The Superintendent will manage daily operations onsite including the project staff and subcontractors. Plans, directs, and coordinates activities of designated project to ensure that goals or objectives of project are accomplished within prescribed time frame and budget parameters by performing the following duties personally or through subordinate supervisors. Key Responsibilities • Must have 7+ years of experience leading the process in building Garden or Podium Wrap type projects, from start up through completion., • Preferred experience also with cast-in-place and precast garage construction is preferred, • Proven experience on running large sites and successful completion of schedule, budget, client satisfaction and safety. Additional Responsibilities: • Work with other staff members to negotiate any changes with subcontractors, • Ensures compliance with company policies and safety procedures as well as contract plans and specifications, • Coordinate or assist with coordination of project activities with Company personnel, • Reviews status reports and modifies schedules or plans as required for review, • Meets with project personnel to discuss & provide technical advice and to resolve problems, • Responsible for and assisting with the overall direction, coordination, and evaluation or the project: including safety, resources, performance, budget, scheduling, equipment management, quality, and risk analysis, • Manages the process to ensure that documented commitments made in the developmental phases of a project are implemented at the proper time, • Reviews and approves vendor pay estimates, material requests and invoices, • Draft, review and approve works and purchase / change orders, • Attends & directs project status meetings and assists in problem solving efforts, • Work with and be part of the estimating/bid process during project procurement phase, • Assume additional responsibilities as directed by division and corporate management. Travel as required to attend, but not limited to, meetings, site visits, training, etc. KEY Skills and Abilities • MULTIFAMILY Construction Experience (Projects $40MM), • Garden / Walk-Up Style project experience required, • Scheduling Expertise, • Communication skills, • Negotiating | Contracts skills, • Ability to work well with a team & manage multiple employees as needed, • Impeccable organizational skills Education/Experience • 8+ years of construction superintendent experience in the MULTIFAMILY ground-up / new-construction industry with 2+ garden style projects completed required.

Job Description ESSENTIAL JOB FUNCTIONS • Ensures adherence to and demonstrates a sound understanding of safety best practices and regulations, • Monitors all work performed and provides crews training where needed, • Performs equipment, material, and routine site inspections, • Ensures teams work together to deliver quality work to strict deadlines, • Provides leadership and guidance to develop their team members skills and abilities, • Manages subcontractors and vendors, • Available for rotational on-call work, • Reconciles work production tasks as they relate to invoicing, • Walks out jobs and properly white lines areas for new work, • Ensures dig tickets are called in and follows up with local jurisdictions, • Positively motivates crew, especially when fighting the elements or behind on projects, • Conducts quality assurance inspections during and after completion of work to ensure compliance to customer specific requirements, • Communicates effectively with homeowners’ associations and hangs door tags to inform residents of an upcoming project, etc., • Critical thinking skills, • Conflict resolution skills, • Good analytical skills with the ability to plan, predict, investigate, and find solutions, • Strong work ethic, leads by example, and does what it takes to get the job done, • Computer experience in Microsoft Office Suite and with various other construction and financial software programs, • Excellent at relationship building, • Ability to communication with clarity at the frequencies required by management and customers, • Ability to travel to multiple sites as required, • Work independently with minimal supervision, • One plus years as a construction supervisor in a capacity similar to current requirements, • Construction background (aerial, underground, etc.), • Basic knowledge of splicing, • Valid driver’s license and excellent driving record, • Must be able to pass a DOT physical, • Must be able to pass a pre-employment drug test, • Understands flag and tag procedures, • Permitting Experience, • Bi-lingual (Spanish/English), • Undergraduate degree, • CDL License

Job DescriptionStreet Maintenance Worker I: PRIMARY DUTY: Efficiently performs the work necessary for the effective maintenance and repair of city streets, parking lots, drainage facilities, and rights-of-way according to established quality standards and procedures. NECESSARY KNOWLEDGE, SKILLS AND ABILITIES: • Knowledge of basic math skills., • Knowledge of use of hand tools and equipment used in the maintenance and repair of streets., • Knowledge of material used in street maintenance operations., • Knowledge of safe handling of traffic in construction and maintenance areas and various operating characteristics of heavy equipment used in street maintenance and repair., • Ability to perform basic troubleshooting of equipment to identify and resolve minor technical issues., • Ability to work safely and take initiative., • Ability to work after hours and on weekends., • Must be able to lift up to 90 lbs., • Ability to follow oral and written instructions., • Ability to maintain positive, effective working relationships with fellow employees and the public. EDUCATION AND EXPERIENCE: • High school diploma or equivalent., • No experience necessary-entry level position. CERTIFICATES AND LICENSES REQUIRED: • Must have a Class "C" Texas driver's license with good driving record and be able to obtain a class "A" Texas drivers license within 6 months from hire date., • Complete work zone safety course within 1 year from hire date Street Maintenance Worker II: PRIMARY DUTY: Efficiently performs the work necessary for the effective maintenance and repair of city streets, parking lots, drainage facilities, and rights-of-way according to established quality standards and procedures. NECESSARY KNOWLEDGE, SKILLS AND ABILITIES: • Knowledge of basic math skills., • Knowledge of use of hand tools and equipment used in the maintenance and repair of streets., • Knowledge of material used in street maintenance operations., • Knowledge of safe handling of traffic in construction and maintenance areas and various operating characteristics of heavy equipment used in street maintenance and repair., • Ability to perform basic troubleshooting of equipment to identify and resolve minor technical issues., • Ability to work safely and take initiative., • Ability to work after hours and on weekends., • Must be able to lift up to 90 lbs., • Ability to follow oral and written instructions., • Ability to maintain positive, effective working relationships with fellow employees and the public. EDUCATION AND EXPERIENCE: • High School diploma or equivalent., • One or more years of experience in maintenance and repair of city streets and drainage facilities or related field. CERTIFICATES AND LICENSES REQUIRED: • Texas Class "A" Driver's License., • Complete work zone safety course within 1 year from hire date. Street Maintenance Worker III: PRIMARY DUTY: Proficiently operate heavy equipment used in the maintenance and repair of streets and drainage system. Efficiently performs the work necessary for the effective maintenance and repair of city streets, parking lots, drainage facilities, and rights-of-way according to established quality standards and procedures. This position also trains personnel in repair and in safe and proper use of heavy equipment. NECESSARY KNOWLEDGE, SKILLS AND ABILITIES: • Knowledge of basic math skills., • Knowledge of use of hand tools and equipment used in the maintenance and repair of streets., • Knowledge of material used in street maintenance operations., • Knowledge of safe handling of traffic in construction and maintenance areas and various operating characteristics of heavy equipment used in street maintenance and repair., • Ability to perform troubleshooting of equipment to identify and resolve technical issues., • Ability to work safely and take initiative., • Ability to work after hours and on weekends., • Must be able to lift up to 90 lbs., • Good communication skills, both oral and written., • Ability to follow oral and written instructions., • Ability to maintain positive, effective working relationships with fellow employees and the public., • General knowledge of principles of supervision, training and evaluating employee performance. EDUCATION AND EXPERIENCE: • High school diploma or equivalent., • Three (3) years' experience in street/drainage maintenance., • Two (2) years' experience operating heavy equipment. CERTIFICATES AND LICENSES REQUIRED: • Texas Class "A" Driver's License., • Complete work zone safety course within 1 year from hire date. Job Posted by ApplicantPro

Job Description General Summary This position is responsible for installation and maintenance of injection molding production machinery such as horizontal injection molding machines, 3 axis robots, automated cells, material loaders, material dryers, water chillers, temperature control units, hot runner controllers, end of arm tooling, etc. Must be able to maintain the equipment in good working condition and to execute planned maintenance and corrective maintenance. Analyze our existing custom production machinery for areas of improvement, designing necessary custom parts for the machinery, and working with the Injection Molding Department to design the most efficient production layout in our new facility. This position is also responsible for tooling changes as well as preventive maintenance and minor repairs of injection molding tooling. Duties and Responsibilities (essential duties are italicized) 1. Performs preventive maintenance as scheduled following the proper lock out tag out procedures., 2. Performs corrective or reactive maintenance when a line is down., 3. Assists with changeovers of the machines as scheduled to accommodate the production schedule., 4. Adjusts the machines as necessary to maintain the productivity on the machines., 5. Leads and supports continuous improvement projects., 6. Supports new employees on the proper training of using, troubleshooting and maintaining the machinery., 7. Keep the spare parts and maintenance work bench and tool carts in order, clean and safe., 8. Support the safety committee to ensure all the guidelines and regulations are being followed, 9. Responsible for machine safety and proper operation., 10. Help during the startup and shutdown procedures in production, 11. Fill out the proper documentation when performing adjustments, preventive or reactive maintenance., 12. Waste disposal management and proper documentation, 13. Assist with facilities maintenance as needed, 14. Performs in a manner consistent with company Core Values and Purpose., 15. Attends all scheduled meetings, missing no more than 10% annually., 16. Clocks in and out for work and lunch with no more than 1 error per month., 17. Provides excellent customer service., 18. Follows all OSHA and other safety guidelines., 19. Actively demonstrates teamwork at all times., 20. Manages any stress on the job, including but not limited to meeting deadlines., 21. Adheres to company safety standards at all times, such that no serious (requiring medical attention) injury occurred during the prior 12-month period., 22. Follows other policies and procedures such that there are no verbal or written warnings during the evaluation period. The duties described above are not inclusive. Additional duties may be permanently assigned or required from time to time due to the need to respond to customer needs and remain competitive in the marketplace. Minimum Knowledge, Skills, and Abilities Required Work environment characteristics described here are representative of those that must be met by a Team Member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 1. High school diploma or equivalent. 2.At least 2 years experience working in a plastic transformation process such as injection molding, extrusion or blow molding and preferably exposed to machinery brands such as ARBURG, Wittman and SEPRO 3. At least 2 years’ experience in a production environment repairing and maintaining injection molding machinery, injection molding tooling, robotic automation systems., 4. Excellent understanding of predictive and preventative maintenance processes., 5. Mechanical skills needed to perform maintenance and must have proven experience and ability in mechanical, electrical and electronic maintenance troubleshooting techniques., 6. Able to demonstrate working knowledge of mechanical/electrical principles/concepts., 7. Able to read/comprehend instructions given through electronic/mechanical instruction books, including electric, electronic, pneumatic and hydraulic diagrams., 8. Familiarity with implementing or maintaining equipment and facilities based on ISO9001 or 13485., 9. Fluently speak, read, and write English., 10. Skilled in time management., 11. Skilled in multi-tasking., 12. Demonstrated customer problem solving skills., 13. Ability to work with minimal supervision., 14. Ability to learn and perform primary functions of positions within department., 15. Ability to manage stress., 16. Ability to meet physical demands of the job which include, but are not limited to: walking; bending; pushing; pulling; sitting for extended periods of time at a desk using a computer, phone and headset; and occasionally lifting and carrying items which may weigh up to 50 pounds., 17. Position spends approximately 100% of time moving about the production area including walking, standing, sitting, squatting, reaching, twisting, and leaning., 18. Vision and hearing must be within or correctable to within normal range., 19. Must work from the corporate office and be able to work on time on a regular basis during regular business hours. Must be available for evening/weekend work as needed., 20. While performing the duties of this job, the Team Member is exposed to production equipment at various times. The noise level in the work environment is usually moderate. This position starts at $23.00- $25.00 per hour depending upon experience. M-F 6:00am-2:30pm Occasional Saturday OT. #zr

Job Description About the Role The Superintendent I is responsible for planning and managing the construction site to ensure that the work is completed to safety and quality standards and stipulated contractual obligations. Utilizing knowledge of building methods, materials, and sequencing, the Superintendent I provides daily oversite to direct the activities of Company and subcontractor personnel. The Superintendent I may be assigned to a specific scope within a large project ($100m or greater), or they may be the lead superintendent on engagements ranging from $5m to $50m. Skills & Qualifications • High School Diploma or GED, required, • Bachelor’s Degree in Construction, Engineering, Architecture, or Business, preferred, • Minimum of 8-years of commercial construction experience, required, • Minimum of 6-years of field supervision as a lead superintendent for a ground-up General Contractor, required, • Construction project experience should include some combination of ground-up healthcare, K-12, higher education, and/or cultural venues, • Construction contract experience should include Construction Manager at Risk (CM@R), Design-Build, and/or Integrated Project Delivery (IPD), • Demonstrated success implementing and managing project safety programs, required, • Proficient with Lean Construction tools and management style, required, • Proficient with scheduling software, required Primary Duties • Develop a Safety Culture with Subcontractors by facilitating the BBS program in coordination with the Job Team., • Analyze, document and address Safety Hazards through Safety Walks in coordination with the Job Team., • Review JHAs for completeness and accuracy daily for all trades on site., • Manage Field Labor for the project including facilitating the hiring and termination process. Coordinate with Office Assistant to execute proper procedure for hiring and termination., • Develop the Master Baseline Schedule with clear logic and accurate activity durations in coordination with Job Team. Regularly update activity completions on the Project Schedule with Job Team and develop strategies to maintain scheduled milestones and substantial completion., • Develop Site Utilization, Logistics and Phasing Plans during Preconstruction for accurate GMP Creation. Update these plans throughout the project to effectively communicate construction planning to the Project Team., • Utilize Lean Board tools to visually manage constraints in productivity. Facilitate proper coordination and communication between all project team members to enhance job productivity., • Facilitate effective Daily Huddles with Job Team and Subcontractors to organize productive daily work tasks., • Lead the creation and coordination of a Weekly Work Plan Utilizing Lean Board Tools. Implement the WWP by communicating and holding subcontractors and project team members accountable for commitments., • Complete PPCs weekly utilizing Lean Board Tools to communicate performance to Project Team. Create necessary recovery plans based on PPCs., • Generate Daily Reports for Linbeck and Linbeck Self-Perform for proper documentation. Review the accuracy and manage timely submission of Daily Reports from all Subcontractors, • Facilitate early communication of Job requirements to subcontractors during Preconstruction and Construction through Kick-Off and Pre-Install Meetings., • Create and maintain necessary SWPPP plans, documentation, permits and measures., • Utilize Autodesk Build Issues and Checklists to manage the QA/QC program on the project in coordination with Subcontractors., • Manage the AHJ Inspection/Finals process and coordinate with all subcontractors for proper approvals. Utilize Inspection/Finals Matrix to create a plan and track the progress of inspections., • Manage the Work Order/Ticket process in coordination with the Project Manager for any work on Time and Material. Review subcontracts to determine if work is in or out of scope and verify work ticket hours, quantities and pricing are accurate., • Utilize Labor Production Report to manage Self-Perform scopes of work to stay within schedule and budget. Enter necessary quantities places and ensure accurate timecard cost coding for precise labor production tracking for Linbeck and leased labor., • Project necessary labor requirements for the Job to assist in Linbeck Labor Coordination. Attend and participate in necessary coordination meetings., • Utilize LAT Technologies to enhance field productivity including, but not limited to, project documentation using 360 Degree Photos and drones., • Utilize and navigate the BIM Model to assist in visualization and quality control on the project. Participate as needed in Spatial Coordination to proactively resolve issues with the design team. Physical Requirements Must be physically fit enough to function safely on a project site and office setting. This includes the following: • Prolonged periods sitting at a desk and working on a computer with repetitive movements, • Exerts in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds of force frequently, and/or in excess of 20 pounds of force constantly to move an object., • Ascends or descends ladders, scaffolding, and steep slopes with agility (Climb), • Maintains body equilibrium to prevent falling from precarious situations (Balance), • Lowers the body to floor level and move with agility (Stoop or Crawl), • Extends out and retrieves objects outside immediate range (Reach), • Supports oneself and stays in an upright position (Stand), • Presses against something with substantial and steady force to thrust forward, downward, or outward (Push), • Exerts a considerable force to draw, drag, haul, or tug objects in a sustained motion (Pull), • Raises substantial objects from a lower to a higher position or moves objects horizontally from position to position (Lift), • Maneuvers small objects precisely by whatever means (Pinch or Pick), • Seizes an object by applying considerable force (Grip), • Detects attributes of objects, such as size, shape, temperature, texture, tension, or force by tactile means (Feel), • Expresses or exchanges ideas through spoken word (Speak), English preferably., • Perceives the nature of sound with no less than a 40db loss @ 500 Hz, 1,000 Hz, and 2,000 Hz with or without correct (Hear), • Is subject to substantial repetitive motions of the body and or its parts, • Must have good depth perception, field of vision, near acuity, • Frequently exposed to weather (occasionally extreme cold, extreme heat, wet, and/or humid, exposure to dust and fumes, and working in highly exposed places) Additional Requirements • Current driver’s license, required., • Work on-site at a main office or project location, required, • May be called after hours and on weekends to address delays, emergencies, bad weather, and other issues at the jobsite, • May require travel Linbeck Group and its affiliates are committed to maintaining a working environment that encourages mutual respect, promotes respectful and productive relationships between co-workers, and is free from all forms of prohibited harassment or discrimination of any Employee or applicant for employment by or against any person, including supervisors, co-workers, temporary or seasonal workers, vendors, or customers. As a result, the Company prohibits any form of harassment or discrimination because of race, color, religion, sex, pregnancy, sexual orientation, age, national origin, physical or mental disability, or any other basis protected by federal, state, or local law.

Job DescriptionJob description: Best Maid Products is in search of a skilled Maintenance Technician. This position is responsible for electrical and mechanical tasks on automated packaging/distribution equipment. Applicants must be capable of utilizing working knowledge to troubleshoot/repair Control Circuits, Electrical Distribution Systems, and conduct Preventative/Predictive maintenance. . Responsible for promoting a safe working environment by following all safety protocols. · Must understand how to maintain and troubleshoot all automated conveyor systems in the building as necessary. ·May be responsible for leading and auditing preventative electrical/mechanical maintenance procedures · Must be capable of performing PLC Control level issue diagnosis and maintenance (Allen Bradley) · Responsible for installing, maintaining, and troubleshooting relay logic, ladder diagrams, control components, photo-eyes, motor starters, limit switches, proximity sensors, solenoids, etc. · Required to utilize blueprints and schematics to perform maintenance safely and efficiently. · Must be willing to collaborate and build relationships with all levels of the organization. Preferred Qualifications: • High school diploma or equivalent, • 2+ years of experience with automated conveyor systems and controls, • 2+ years of experience in the repair of material-handling equipment, • 2+ years of experience conducting predictive and preventative maintenance procedures., • 1+ years of metal and wood fabrication, • 1+ years of blueprint and electrical schematic reading, • 1+ years of knowledge of electrical and electronic principles Benefits: • Dental insurance, • Health insurance, • Paid time off, • 10-hour shift, • Day shift, • Monday to Friday, • Overtime

Job DescriptionDescription: Position Summary: Receive, stock, issue, and control assets required in the manufacturing of aircraft seats according to the procedures in the Logistics area. Essential Duties and Responsibilities include the following, other duties may be assigned: • Issue or distribute materials, parts and supplies to customers or co-workers, based on information from incoming requisitions., • Ensure parts are protected from damage throughout the Logistics processes., • Properly identify all boxes in stock with the correct storage unit and material number., • Move, prepare and stage parts to the identified area, • Assist in inventory control by conducting location validations and stock counts., • Reconcile waybill, bill of lading with bill of materials, and actual shipment arrivals, • Count, sort, and identify items against the delivery note prior to process., • Inspect the received goods, making note of any damages and discrepancies, and immediately reporting the same., • Must be able to work a flexible schedule Requirements: Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Education: High School Diploma or GED equivalent required Experience: • Experience in warehouse environment, • Experience using an order picker preferred, • Experience with RF device, • Computer data entry, • Knowledge of databases sufficient to perform the job, duties, and tasks associated with the position, • Ability to work in a team environment, • Good attendance record

Job Description Legacy Talent Search is currently seeking candidates for General Laborer roles in Fort Worth. Our client is a well-established industry leader known for innovation and a commitment to delivering the highest quality products. With a focus on continuous improvement, they pride themselves on maintaining excellence at every stage of their manufacturing process. Key Responsibilities: · Perform general labor duties including material handling, loading/unloading, and facility upkeep · Accurately enter, track, and update data related to production, materials, and inventory · Operate basic equipment and tools safely and efficiently · Follow safety protocols and maintain a clean, organized work environment · Collaborate with team members to meet daily production and reporting goals · Assist with quality checks and ensure accurate documentation of work performed · Report any safety issues, equipment malfunctions, or process concerns to supervisors Qualifications: · High school diploma or equivalent · Prior data entry experience required (accuracy and attention to detail essential) · Ability to lift up to 50+ lbs and stand for extended periods in a fast-paced environment · Strong organizational and multitasking skills · Excellent teamwork, communication, and collaboration abilities · Flexibility to work varying shifts, including evenings and weekends, as required · Prior experience in a warehouse, production, or labor role is preferred What We Offer: · Competitive hourly wage · Comprehensive benefits package, including health, vision, and dental insurance · Opportunities for growth and advancement within the company · A supportive and inclusive workplace culture · The chance to contribute to a company that values innovation, quality, and community At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life, one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community—how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

Job Description Summary/Objective: Venus Construction is hiring an experienced CDL End Dump Truck Driver to safely transport materials like dirt, gravel, and sand to and from job sites. This role requires adherence to DOT and Texas state regulations and a strong commitment to safety in a fast-paced construction environment. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Operate and drive end dump trucks to transport materials to and from job sites., • Ensure loads are secure and properly distributed to comply with weight restrictions and DOT and Texas state regulations., • Perform pre-trip and post-trip vehicle inspections to ensure safe operating conditions., • Maintain accurate logs of working hours, vehicle maintenance, and material deliveries., • Follow designated routes and schedules while adhering to all traffic laws and company policies., • Assist with loading and unloading materials when necessary., • Communicate effectively with dispatchers, project managers, and site supervisors., • Perform routine maintenance and report any mechanical issues to the maintenance team., • Valid Class A or Class B CDL license, depending on truck configuration, with a clean driving record., • Minimum 2 years of experience operating an end dump truck in a construction or similar environment., • Knowledge of DOT and Texas state regulations regarding commercial vehicle operation., • Ability to operate manual and automatic transmissions., • Experience hauling aggregates, dirt, or construction materials is a plus., • Air Brake Endorsement required if the truck is equipped with air brakes., • Strong attention to detail and commitment to safety., • Ability to work in various weather conditions and lift up to 50 lbs. Venus Construction is an equal opportunity employer & participant in e-verify. Venus Construction does not discriminate on the basis of race, religion, color, sex, sexual orientation, age, disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. Company DescriptionVenus Construction is an award-winning Site Utility Contractor that has been proudly serving the Dallas-Fort Worth Metroplex since 1967. Venus Construction is now in its third generation of ownership by the McAda family. We offer underground and infrastructure utility installation for commercial, residential development, multi-family, municipal, and TxDOT projects. Trust is our brand! Venus Construction is a participant in E-Verify and an Equal Opportunity Employer.Venus Construction is an award-winning Site Utility Contractor that has been proudly serving the Dallas-Fort Worth Metroplex since 1967. Venus Construction is now in its third generation of ownership by the McAda family. We offer underground and infrastructure utility installation for commercial, residential development, multi-family, municipal, and TxDOT projects. Trust is our brand!\r\n\r\nVenus Construction is a participant in E-Verify and an Equal Opportunity Employer.

Job Description As a leader in the industry, Insituform Technologies LLC, an Azuria Water Solutions company, is a global company that has been providing pipeline protection services for more than 50 years. Insituform values employee development and empowerment and are looking for innovative individuals to join their team and contribute to maintaining critical infrastructure worldwide. We are currently seeking Construction Technicians / Laborers with valid CDL licenses to join our team in Fort Worth, TX. As a Construction Technician / Laborer, you will be responsible for the installation of cured-in-place pipe (CIPP) for various municipal, industrial, storm, and sewer line rehab and repair projects. This position requires working with minimal oversite while still adhering to instructions closely. We are currently offering a limited-time sign-on bonus of $4,000 for new hires with a valid CDL license, and sign-on bonuses for new hires without a current CDL license are also available at a reduced amount. New employees who meet the criteria outlined in our sign-on bonus program will be eligible for the full payout. The starting pay is at an hourly rate, and the average Construction Technician can expect to earn up to $55,000 per year in total (includes starting hourly rate, overtime, per diem). Why You’ll Love Working For Us: • Competitive salary, • Daily per diem while traveling, • 100% covered individual hotel room stays while traveling, • Full benefits package including medical, dental, vision, and prescription drug coverage, • 401k matching, • Tuition assistance, • Paid time off and overtime pay, • Company paid PPE, boots, and safety gear, • Career growth opportunities, • Work for a forward-thinking and innovative company, • Repair various types of sewer lines by using a specific product and process, • Ensure pull-in tube is properly prepared for installation by examining D-Rings, chains, and attachment to pulling cable, • Install the prepared tube using a winch, backhoe, crane, or other appropriate material, • Monitor gauges, dials, or other indicators to ensure equipment is working properly, • Cure resin products using an inflation tube, banding boots, layflat, boiler hose, etc., • Learn / train on Insituform’s products, processes, safety procedures, installation techniques, and equipment, • Drive various vehicles (pickup trucks to tractor-trailer rigs) to haul crews and equipment, • High School diploma or equivalent preferred, • Experience as a Construction Laborer and / or Installation Technician highly preferred, • OSHA certifications are a plus, • Valid driver’s license required with a clean motor vehicle report, • Must possess a Class A or B CDL and be aligned with Insituform’s motor vehicle standards (Hazmat endorsement is preferred but not required), • Must be able to wear a respirator and body harness while entering confined spaces, • Ability to lift / move up to 75 pounds and use pneumatic, battery-powered, or electric tools, • Comfortable working outside at job sites with moving vehicles and mechanical operations, with occasional exposure to fumes or airborne particles, • Must be able to travel weekly (potentially out of state) Azuria Water Solutions is an Equal Opportunity Employer. Equal opportunity is a sound and just concept to which Azuria Water Solutions is firmly bound. Azuria Water Solutions will not engage in discrimination against, or harassment of, any person employed or seeking employment with Azuria Water Solutions on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, non-disqualifying disability, status as a protected veteran or other characteristics protected by law. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. VEVRAA compliant – priority referral Protected Veterans requested.

Job Title: Materials Specialist Location: North Richland Hills, TX Work Schedule: Monday – Friday, 8:00am – 5:00pm (1-hour lunch) Type of Employment: Direct Hire Compensation: $20.00 – $30.00/hour (eligible for overtime) Industry: Manufacturing Benefits: This position is eligible for Medical, Dental, and Vision insurance; Paid Time Off (PTO); Long-term and Short-term Disability; and Voluntary Life Insurance, with employer contribution beginning after 60 days of full-time employment. Job Description: Addison Group has partnered with a growing manufacturing client to hire a Materials Specialist. In this role, you will be responsible for developing and maintaining accurate Bills of Materials (BOMs) that support production, planning, and inventory management. The position requires strong analytical skills, keen attention to detail, and the ability to thrive in a fast-paced manufacturing environment. Key Responsibilities: • Develop and maintain accurate Bills of Materials based on engineering documentation, • Translate technical drawings into structured BOMs for production use, • Manage and update material master data within ERP systems, • Coordinate with planning, scheduling, and inventory teams to ensure data accuracy, • Support material capacity planning for upcoming projects, • Collaborate with cross-functional departments to streamline data flow and resolve discrepancies, • Perform additional administrative and operational tasks as needed Qualifications: • 1–3 years of experience in a manufacturing or production setting, • Familiarity with ERP systems (NetSuite or similar preferred), • Advanced proficiency in Microsoft Excel (assessment required), • Ability to interpret engineering drawings and technical documentation, • Strong mathematical and data management skills, • Excellent communication and teamwork abilities, • Associate degree or equivalent technical training preferred

Location: Fort Worth, TX | Full-Time | On-Site Ferris Mfg. Corp., a Fort Worth-based medical device manufacturer and creator of PolyMem Advanced Wound Care Dressings, is seeking a Material Engineer/Scientist to support the Product Development team as well as collaborate with the Manufacturing, Regulatory, Marketing and Sales departments. You will be responsible for finding, developing, and qualifying materials for the new and existing Ferris products. Key Responsibilities • Collaborate with cross-functional teams to develop and optimize materials for medical devices, ensuring compliance with regulatory and performance targets., • Find and qualify alternative sources and alternate materials 1) to assure consistent supply and 2) to save on costs (if possible), • Investigate and understand foam (especially polyurethane foam) production and processing from a technical perspective., • Guide material selection, characterization, and processing techniques., • Support product development from concept through commercialization, including prototyping, testing, and validation., • Support material compliance, sourcing, and improvements across product lifecycle., • Investigate and resolve material-related issues in design, manufacturing, and field operations., • Prepare key material related documentation, such as, specifications, test methods, protocols, and reports., • Contribute to risk management, design control, audits, and regulatory submissions., • Stay current with emerging materials technologies and industry trends relevant to medical devices., • Draft, edit, and critique policies, procedures, work instructions, specifications, reports, and records. Must Have Qualifications • Bachelor’s or Master’s degree in Materials Science / Engineering, Polymer Science, Chemical Engineering, or other relevant field., • Experience preferred in materials engineering, ideally in foam, plastic, silicone, web, adhesive, chemical, or medical device industries., • Strong understanding of polymers, plastics, and composites used in medical applications; familiarity with metals and ceramics is a plus., • Strong understanding of material science fundamentals (morphology, surface chemistry, etc.) for troubleshooting or field issues., • Experience with material characterization and imaging techniques (e.g., SEM, ICP, GFAA, FTIR, mechanical testing, etc.) and laboratories that provide such services., • Familiarity with FDA and ISO regulations for medical devices, especially ISO10993 is beneficial., • Excellent problem-solving, communication, and teamwork skills., • Proficiency in Microsoft Office Suite., • Working both independently and as part of a team are essential., • Knowledge of biocompatibility and sterilization processes is beneficial., • Experience with chemical and materials modeling software/techniques and CAD, is beneficial.