Trabajos material en Buffalo, New YorkCrear alertas

Job Description RG HOME IMPROVEMENT is an energetic outfit that specializes in QUALITY WORK. We seek to find individuals who are able to complete , but not be limited by the following items • Reads plans, instructions, or specifications to determine work activities., • Measures, marks, or records openings or distances to layout areas where construction work will be performed., • Signals construction equipment operators to facilitate alignment, movement, and adjustment of machinery., • Mixes, pours, spreads, smoothen and finishes concrete or cement., • Erects or dismantles scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures., • Sprays materials such as water, steam, paint, or stucco through hose to clean, coat, or seal surfaces., • Applies caulking compounds by hand or with caulking gun to seal crevices., • Grinds, sands, or polishes surfaces such as concrete, marble, terrazzo, or wood flooring., • Demolishes buildings, saws lumber, dismantles forms, removes projections from concrete, mounts pipe hangers, and cuts and attaches insulating material., • *The company reserves the right to add or change duties at any time.

Job DescriptionResponsibilities include operating heavy machines (Material cutting, drop hammers, presses, drill presses, belt grinders, forklift) for the manufacturing of steel forgings. If you have ever watched forged in fire on history channel, similar but with much bigger hammers. 1st Shift (6:00 AM - 1:30 PM) Benefits offered after 90 days.(Health, Disability, 401k) Must have: -High school diploma/GED -Reliable transportation(NO BUS) Prior experience as Machinist a plus but not a requirement Overtime (Time + 1/2) offered WWW.ALRY.COM

Job DescriptionBenefits/Perks • Competitive Pay, • Career AdvancementJob SummaryWe are seeking a General Laborer to join our team. In this role, you will preform manual labor tasks. This will include keeping the worksite clean through the collection of trash, operating power tools, setting up temporary structures, or other necessary tasks. Experience in tasks like siding, window installation, door installation, and knowledge of how to use a break is preferred. The ideal candidate is a hard worker with the ability to meet the physical demands of the job. You must work well with others and aim to always work as a team Responsibilities • Maintain a clean work environment by picking up trash, excess building materials, or other potentially hazardous products, • Provide assistance to onsite tradespeople such as sub crews, and carpenters, • Preform daily job tasks efficiently, • Transport materials and equipment from one location to another, • Operate power tools and/or industrial equipment, • Set up cones, warning signs, and any other necessary material to increase visibility, • Construct, transfer, and tear down temporary structures such as scaffolding, • Other manual labor tasks as required by the foreman or supervisor, • Report any unsafe conditions or equipment in need of repairQualifications, • Ability to meet the physical demands of the job, including lifting heavy objects, digging, and standing for long periods, • NYS License and transportation to job sites., • Strong attention to detail, • Excellent hand-eye coordination, • AT LEAST 1 year experience on a construction crew, • Knowledge of how to use a metal break and how to coil windows/doors, • Ability to adhere to all safety rules and regulations, • Knowledge of power tools and industrial machinery is preferred, • Strong teamwork and interpersonal skills, • Additional certifications or apprenticeship experience is preferred but not necessary

Job Description Job Overview • Company: GLC Business Services, • Salary/Pay Rate: $90,000 - $125,000 per year, • Location: Buffalo, New York, • Job Type: Full-Time, • Schedule: Monday – Friday, • Project Scope: Commercial HVAC, Mechanical & Piping Construction, • Mandatory Licenses & Certifications: Valid Driver's License Position Summary The Project Manager is responsible for planning, coordinating, and managing HVAC, mechanical, and piping construction projects from inception through completion. This position oversees project budgets, schedules, subcontractors, procurement, client relations, and field operations to ensure projects are completed safely, on time, and within budget. The Project Manager collaborates closely with owners, engineers, field supervisors, and contractors to resolve issues, maintain project progress, and deliver exceptional results for clients. Essential Duties & Responsibilities • Project Planning & Execution, • Manage all phases of assigned mechanical construction projects from preconstruction through closeout., • Develop and maintain project schedules, budgets, and work plans., • Review project drawings, specifications, contracts, and scope of work., • Coordinate labor, materials, equipment, and subcontractors to support project objectives., • Monitor project performance and implement corrective actions when necessary., • Ensure projects are completed according to contract requirements and quality standards., • Financial Management, • Prepare and manage project budgets, forecasts, and cost reports., • Track labor productivity, material costs, and project expenditures., • Review and approve invoices, purchase orders, and subcontractor payments., • Manage change orders, cost impacts, and project billing., • Identify opportunities to improve project profitability and efficiency., • Client & Stakeholder Relations, • Serve as the primary point of contact for clients, owners, and project stakeholders., • Lead owner, architect, and contractor (OAC) meetings., • Maintain positive relationships with clients, vendors, subcontractors, and trade partners., • Communicate project status, milestones, and potential issues proactively., • Ensure customer satisfaction throughout the project lifecycle., • Field Coordination & Leadership, • Collaborate with field supervisors and foremen to ensure efficient project execution., • Support jobsite teams in resolving technical and operational challenges., • Conduct jobsite visits to monitor progress, quality, and safety compliance., • Coordinate with other trades to minimize conflicts and maintain schedules., • Promote a culture of teamwork, accountability, and safety., • Risk Management & Compliance, • Ensure compliance with company policies, OSHA regulations, and contract requirements., • Manage RFIs, submittals, change orders, and project documentation., • Identify project risks and develop mitigation strategies., • Maintain accurate records and project files throughout the project lifecycle., • Support project closeout activities, including punch lists and final documentation. Qualifications & Experience • Bachelor’s degree in Construction Management, Mechanical Engineering, or a related field preferred., • Minimum of five (5) years of project management experience in the mechanical construction industry., • Experience managing HVAC, piping, and mechanical construction projects., • Strong understanding of project scheduling, budgeting, and cost control., • Proficiency with construction management software and Microsoft Office applications., • Experience with project management platforms such as Procore, Bluebeam, or similar software preferred., • Valid driver’s license and ability to travel to project sites as needed. Knowledge, Skills & Abilities • Strong leadership and team management skills., • Excellent communication and relationship-building abilities., • Ability to manage multiple projects and competing priorities., • Strong organizational and problem-solving skills., • Knowledge of mechanical systems, construction practices, and industry standards., • Ability to read and interpret drawings, specifications, and contracts., • Strong negotiation and conflict-resolution abilities. Work Environment & Physical Requirements • Combination of office and field work on active construction sites., • Frequent travel to project locations as required., • Ability to sit, stand, walk, and use a computer for extended periods., • Occasional lifting of materials and equipment up to 25 pounds., • May require visits to mechanical rooms, rooftops, and active construction environments. Compensation & Benefits • Competitive salary of $90,000 - $125,000 annually, • Performance-based bonus opportunities, • Medical, Dental & Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off and Company Holidays, • Company-paid Life Insurance, • Professional development and advancement opportunities, • Mileage reimbursement and travel support for project visits, • Stable, long-term career growth with a respected mechanical contractor About Us GLC Business Services partners with clients to deliver high-quality commercial HVAC, mechanical, and piping construction projects across Western New York. Our success is built on strong relationships, technical expertise, and a commitment to safety, quality, and customer satisfaction. We invest in our employees by providing the resources, support, and opportunities needed to build long-term careers while delivering exceptional results for every client. GLC Business Services is an Equal Opportunity Employer and considers all qualified applicants without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, veteran status, or any other protected characteristic under applicable federal, state, or local law.

Job Description Company: GLC Business Services Job: HVAC Project Engineer Location: Buffalo, NY Salary Range:$60,000.00 To $80,000.00 Annually Position Summary • The Project Engineer provides technical and administrative support to project management and field operations teams on HVAC, mechanical, and piping construction projects. This role assists with project documentation, submittals, RFIs, scheduling, procurement, cost tracking, and coordination between field personnel, vendors, and clients. The Project Engineer plays a key role in supporting successful project execution by ensuring accurate communication, timely documentation, and adherence to project specifications and company standards. Essential Duties & Responsibilities • Project Administration & Documentation, • Assist Project Managers with the administration and execution of mechanical construction projects., • Prepare, track, and maintain project documentation, including contracts, drawings, and specifications., • Process and manage RFIs, submittals, change orders, and project correspondence., • Maintain accurate project files and records throughout the project lifecycle., • Support project closeout activities, including punch lists and turnover documentation. Scheduling & Coordination • Assist in developing and maintaining project schedules and look-ahead plans., • Coordinate with field personnel, vendors, subcontractors, and clients to ensure timely project execution., • Monitor project progress and communicate updates to project teams., • Participate in project meetings and document meeting minutes and action items., • Support procurement activities and material tracking to maintain project schedules. Financial & Cost Support • Assist with project budgeting, forecasting, and cost tracking., • Review invoices, purchase orders, and subcontractor documentation., • Track labor productivity and project expenditures., • Support change order pricing and documentation., • Help identify and communicate potential cost or schedule impacts. Technical Support • Review project drawings and specifications for accuracy and completeness., • Assist with interpreting plans, specifications, and contract requirements., • Coordinate with engineers, consultants, and field teams to resolve technical issues., • Support quality control efforts to ensure work meets project requirements and industry standards., • Assist in ensuring compliance with applicable codes and regulations. Qualifications & Experience • Bachelor’s degree in Mechanical Engineering, Construction Management, or a related field preferred., • Prior experience in mechanical construction, HVAC, or piping projects preferred., • Internship or entry-level construction experience is beneficial., • Familiarity with construction documentation and project processes is preferred., • Proficiency in Microsoft Office applications., • Experience with Procore, Bluebeam, or similar construction management software preferred., • Valid driver’s license and ability to travel to project sites as needed. Knowledge, Skills & Abilities • Strong organizational and time management skills., • Excellent verbal and written communication abilities., • Strong problem-solving and analytical skills., • Ability to manage multiple priorities in a fast-paced environment., • Ability to read and interpret construction drawings and specifications., • Strong attention to detail and commitment to accuracy., • Ability to work collaboratively with project teams and clients. Work Environment & Physical Requirements • Combination of office and field work on active construction sites., • Frequent interaction with project teams, clients, and vendors., • Ability to sit, stand, walk, and use a computer for extended periods., • Occasional lifting of materials and equipment up to 25 pounds., • May require visits to active construction sites, rooftops, and mechanical spaces.

• ROLL HARD, EARN HARD - Top company drivers make up to $90,000/year*, • PAY THAT MOVES YOU - Earn 27% of linehaul + strong weekly take-home*, • SUPPORT THAT RIDES WITH YOU - Strong pay, real perks, and respect on every mile At P&S, we put our drivers first. We hire experienced flatbed drivers and treat them like family, providing higher support, better pay and utmost respect - and clean, comfortable trucks! And it's not just our opinion - in a recent survey of flatbed drivers, nearly 90% confirmed that P&S pays better than other flatbed trucking companies and is better to work for. And drivers agree: in a recent survey, nearly 90% said P&S pays better than other carriers and is a better place to work. Want a driving job where you're valued, supported, and earning more? Fill out a quick form and talk to a recruiter today. • Strong weekly pay. Top company drivers earn up to $90,000 per year, with weekly gross averaging $1,800-$2,000.*, • Percentage pay that rewards you. Make 27% of linehaul, plus tarp pay, detention pay, and layover pay-your effort directly boosts your paycheck.*, • Home when it counts. Get home weekends and enjoy a predictable schedule that balances strong earning potential with real time off., • Driver-friendly freight + support. Haul steady, well-planned freight - including steel coil, pipe + building material loads - with dependable miles and the support you need to stay productive on the road., • $5,000 sign-on bonus*, • Medical, dental, vision, life + short-term disability, • 401(k) with company match, • $5,000 referral bonus, • Free rider + pet program, • Clean, comfortable trucks All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • 1 year of verifiable CDL A OTR experience

Job Description Looking for skilled laborers for a Pre-cast concrete company in Lackawanna, NY 1st shift hours - Mon-Fri 6am-2:30pm+OT Starting at $18-19/hr, based on experience! Please respond with resume for immediate consideration!! Qualifications: -Must have at least one years of similar production or construction/landscaping experience -Must be able to read a tape measure, blueprint reading experience a plus -Must be comfortable using hand & power tools -Shop math and carpentry experience preferred -Must be comfortable performing other general labor & material handling as needed Job Duties: -Decipher blueprints to build wooden & foam molds for block production -Use hand & power tools to cut, shape wood & concrete -Check for correctness of measurements -Move molds & blocks by hand and overhead lift/crane -Sand and scrape casted blocks to correct finish -Maintain a clean and safe work environment \nCompany Description At APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. When APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions. Our branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns. At APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. \r\n\r\nWhen APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions.\r\n\r\nOur branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns.

Job Description Looking for skilled and entry level laborers for for a manufacturing company in the Clinton & Bailey area of Buffalo! Temp to perm opportunities with room to grow! Hours dependent on shift - 1st, 2nd & 3rd available Pay starts at $18/hr + $.50/$1.00 shift differential Please respond with resume for immediate consideration!!! REQUIREMENTS: -Must have prior production or general labor experience. Manufacturing experience preferred -Must be comfortable working around heavy equipment and machinery in an industrial environment -Must have experience with hand and power tools -Experience with assembly, machine operation, or blueprint reading preferred -Must be reliable and have strong communication skills *Specific requirements may vary by job* JOB DUTIES: -Assist in the production of various products, such as fiberglass, composite/plastic molded products, etc. -Operate machines and perform assembly -Read diagrams or blueprints for specifications -Perform inspections -Handle material and load machines as needed -Perform all other general labor duties as needed -Maintain a clean and safe workplace at all times. \nCompany Description At APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. When APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions. Our branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns. At APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. \r\n\r\nWhen APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions.\r\n\r\nOur branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns.

Job DescriptionDescription: The Manufacturing Deburr Leadman is a skilled deburr technician that can lead a team of deburr employees on quality and packaging of all CNC manufactured product at Snyder Industries. Oversees the shipping/receiving department to ensure correct product is shipping to meet on time delivery targets. Works with internal sales team to prioritize product flow through final inspection. Works with internal quality team on non-conformances found at final inspection. Uses blueprints, ship lists, and computer MRP software to meet customer requirements. Requirements:Essential Duties and Responsibilities The essential functions include, but are not limited to the following: · Blueprint reading, GD&T, Excel, ERP systems. · Understand manufacturing processes: Turning, Milling, Gear cutting, and Heat treating. · Works with Quality Manager on non-conformances found in department · Oversees final tapping operations · Prioritizes product for deburr employees with help with Sales department · Reviews final inspection checklists and visual inspections before packaging products · Performs visual inspection in accordance with customer specifications and ISO 9001:2015 requirements · Utilizes the ship list and working with production analyst to meet delivery needs · Performs diversified deburring and final inspection duties · Operates tools and equipment such as hand grinder, Bridgeport mill, polishing station, and tap tables · Works with engineering team on gauge needs, fixturing, tooling. · Works with quality department with calibration needs · Manages organization of inspection area and raw material warehouse · Complies with safety regulations in all aspects of performing job responsibilities. · Operates computer and enters inspection data · Other Misc. Deburr/Inspection functions Minimum Qualifications (Knowledge, Skills, and Abilities) · Experience and interest in a CNC machining job shop environment · Strong written and verbal communication skills · Attentive to detail; organized · Ability to supervise/lead team · Ability to take initiative, to maintain confidentiality, to meet deadlines, and to work in a team environment · Recommend: MS Office Suite (Outlook, Word, Excel, PowerPoint) · Recommend: Understanding of raw materials: castings, forgings, bar stock, plate materials · Recommend: Understanding of CNC turning, CNC milling, Heat treat (carburization, quench & tempering, induction hardening, welding), and gear cutting (Shaping & Hobbing) · Recommend: CNC Machining background Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. This position operates on the manufacturing floor. Employee will be responsible for looking at all angles of parts in the machine and on pallets. This role routinely uses standard office equipment such as computers, phones, cameras, copiers, and filing cabinets. While performing the duties of this job, the employee is regularly required to stand; walk; use hands; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must lift up to fifty (50) lbs. occasionally. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Job Description Job Description Power Drives, Inc. is a Buffalo‑based manufacturer specializing in custom‑engineered hose, tube, and fluid conveyance systems for a wide range of industrial and mobile equipment applications. Founded in 1946, PDI is known for delivering high‑quality, reliable solutions backed by strong engineering expertise and decades of industry experience. Pay Rate: $17.50 per hour. Employees have opportunities for salary increases through our tiered training program, as well as monthly performance incentives. Schedule: 7:00 AM -5:30 Monday- Thursday This role is 100% onsite CLIMATE CONTROLLED ENVIRONMENT Objective: To assemble, test and tag hoses, tubes, fittings, and accessories with the highest level of quality and efficiency. Minimum Requirements • High School Diploma or equivalent Job Requirements • Ability to comprehend and execute work assignments with minimal follow up supervision, • Ability to stand throughout entire shift, • Be customer service and quality driven, • Ability to read and comprehend blueprints, • Ability to be cross trained in other functions, • Observant, attentive to detail, and quality conscious, • Self-motivated and task driven, • Basic math, reasoning, and problem-solving skills, • Ability to work independently or in a team environment, • Ability to lift up to 40lbs. Essential Duties and Responsibilities • Execute assignments as given by the supervisor or group leader, • Meet or exceed quality of work and quantity expectations, • Follow all work instructions, policies, work rules, safety guidelines, and work procedures, • Utilize measurement devices like calipers, digital scales, and gage clocks to perform quality checks as required, • Perform basic preventative equipment maintenance as assigned, • Participate in problem solving, continuous improvement, and customer complaint resolution efforts, • Immediately inform supervisor or group leader of all equipment, process, material, safety, or quality concerns, • Training other team members as assigned, • Participate in daily area clean up and more significantly facility clean-up efforts as assigned, • Read and understand product blueprints and technical data sheets as required, • Set up machinery and properly use protractors and other jigs and fixtures as required, • Ensure completed product and left-over materials are returned to proper locations, • Accept reassignments to other departments as workload dictates

Job Description We are a dynamic company seeking a dedicated Cherry Picker Operator to join our team. The successful candidate will play a crucial role in our operations, ensuring efficient movement of freight and maintaining a clean and safe working environment. Our company prides itself on its unique approach to logistics and its commitment to employee satisfaction. Responsibilities • Efficiently move freight from one line to another or throughout the warehouse., • Load and unload all material on freight trucks., • Receive inventory through our custom software., • Perform daily fork-truck safety inspections at the beginning of each shift., • Manage time effectively to allow for general housekeeping duties, ensuring a clean and safe working environment.Qualifications, • Ability to manage time effectively and maintain a clean and safe working environment., • Experience in a similar role is preferred. Powered by JazzHR 8SPaOhX14w

Job Description GTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safety I Quality I Customer Obsession I Speed I Agility GTI Fabrication designs, engineers, and manufactures complex modular systems supporting modular data center infrastructure, battery energy storage systems (BESS), power generation platforms, and industrial markets. Our Buffalo manufacturing facility supports fabrication, welding, paint, electrical integration, mechanical assembly, and final system build for mission-critical industrial infrastructure products shipped across the United States. GTI operates in a fast-paced industrial manufacturing environment where General Laborers, Production Workers, Manufacturing Associates, Assembly Technicians, and Industrial Assemblers support the hands-on production of modular systems, electrical equipment enclosures, power infrastructure products, and industrial assemblies. Position Overview GTI Fabrication is seeking dependable and hard-working General Laborers, Production Workers, Manufacturing Associates, Assembly Technicians, and Industrial Assemblers to support daily manufacturing operations across fabrication, assembly, paint, electrical integration, packaging, and material movement activities within our Buffalo facility.This role supports the manufacturing of modular data center infrastructure, battery energy storage enclosures, power systems, industrial skids, and integrated electro-mechanical assemblies. Team members will assist with assembly, material staging, industrial production support, packaging, component installation, and movement of parts and assemblies throughout the manufacturing process.Successful candidates may come from manufacturing, warehouse, construction, assembly, fabrication, production, logistics, automotive, skilled trades, or industrial backgrounds. GTI is looking for individuals who want long-term careers within advanced manufacturing and industrial operations. Responsibilities General Laborer Responsibilities • Perform General Laborer duties supporting fabrication, assembly, electrical integration, paint, packaging, and warehouse operations, • Assist with loading, unloading, staging, cleaning, grinding, material movement, and production support activities, • Support manufacturing teams with movement of parts, materials, hardware, and assemblies throughout the facility, • Assist with preparation of modular enclosures, industrial components, and production work areas, • Support General Laborer activities tied to fabrication, mechanical assembly, and industrial manufacturing operations, • Maintain clean, organized, and safe production areas in accordance with GTI safety standards Production Worker Responsibilities • Perform Production Worker responsibilities supporting modular manufacturing and industrial production operations, • Support production schedules and manufacturing output tied to modular data center and power infrastructure builds, • Assist with packaging, component installation, assembly preparation, and manufacturing support tasks, • Support production line activities across fabrication, electrical integration, paint, and final assembly operations, • Work alongside Manufacturing Associates, Industrial Assemblers, and Assembly Technicians to complete production builds efficiently, • Maintain Production Worker productivity standards while supporting quality and operational goals Manufacturing Associate Responsibilities • Support Manufacturing Associate activities across fabrication, mechanical assembly, electrical integration, and warehouse operations, • Assist with assembly of modular enclosures, electrical equipment housings, structural assemblies, and industrial systems, • Support staging and installation of brackets, panels, hardware, cable trays, insulation, doors, and industrial components, • Work with production teams to support manufacturing builds tied to modular infrastructure systems, • Maintain Manufacturing Associate quality standards while supporting daily production targets, • Participate in manufacturing process improvement and continuous improvement activities Assembly Technician Responsibilities • Perform Assembly Technician duties supporting mechanical assembly, industrial assembly, and modular system integration, • Read and follow work instructions, assembly drawings, blueprints, and production documentation, • Install hardware, brackets, wall panels, floors, doors, insulation, structural supports, and industrial components, • Use drills, impacts, grinders, saws, tape measures, and assembly tools safely and effectively, • Support Assembly Technician activities tied to modular data center infrastructure and industrial manufacturing builds, • Work cross-functionally with Manufacturing Associates and Industrial Assemblers to complete complex assemblies Industrial Assembler Responsibilities • Perform Industrial Assembler work supporting integration of industrial and modular infrastructure systems, • Support mechanical assembly, structural assembly, electrical integration support, and industrial equipment installation activities, • Assist with installation of industrial components, hardware, mechanical systems, and production assemblies, • Work from blueprints, diagrams, manufacturing instructions, and production schedules, • Support Industrial Assembler activities across fabrication, manufacturing, electrical integration, and final assembly operations, • Maintain Industrial Assembler quality standards while supporting production schedules and operational goals Preferred Qualifications • Experience as a General Laborer, Production Worker, Manufacturing Associate, Assembly Technician, Industrial Assembler, Warehouse Associate, Construction Laborer, Mechanical Assembler, or similar manufacturing role preferred, • Comfortable working in manufacturing, industrial, warehouse, production, fabrication, or construction environments, • Ability to use hand tools, power tools, grinders, drills, impacts, and production equipment safely, • Ability to lift 50 pounds and stand for extended periods, • Strong attendance, reliability, and work ethic, • Ability to follow instructions, safety procedures, and production schedules, • Comfortable working in a fast-paced industrial manufacturing environment #ZR Perks & Benefits GTI offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy Policy Terms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Now Hiring a MACHINE OPERATOR FOR OUR TURRET MACHINE - SECOND SHIFT 10 Hour Shift Evening/Nights Responsible for set-up and operation of turret equipment to punch and prepare material for job orders consistent with customer requirements. Zehnder Rittling - A Trusted Name In Hydronic and Radiant Heating Since 1946 located in Western New York at 100 Rittling Blvd., Buffalo, NY 14220. If you are looking for a career not only a job, apply today at: www.zehnder-rittling.com Zehnder Rittling has led the industry in quality, responsiveness, and innovation for over 70 years. With patented and proven heating and cooling products, and custom-build engineering with CAD design capabilities, Zehnder Rittling is a single source supplier for the full variety of hydronic or radiant heating and cooling solutions. We are looking for a detail oriented, fast paced individual who are comfortable working 10 hours a day. • 40 hours per week or more, • 4:00 pm - 2:30 am Monday through Thursday, • Overtime required (when needed) -, • Friday 4:00 pm to 2:30 am (10 hours) and, • Saturday 11:30 am to 5:30 pm (6 hours) Position Summary: Responsible for set-up and operation of turret equipment to punch and prepare material for job orders consistent with customer requirements. Duties and Responsibilities: • Reviews job orders to determine customer specifications., • Sets up turret. Turn on machine, water power, hydraulic. Reset machine to zero (bring it home), • Modifies computer programs to meet job specifications on a regular basis., • Sets up tooling specifications., • Performs incoming inspection on sheared material prior to punching. (Material that does not meet specifications should be documented via "blue sheet". Obtains clearance from Leadperson or Management prior to continuing with job if problems identified.), • Operates turret, working at an appropriate tempo to meet production quantities and also maintains quality standards., • Performs first piece inspection on newly punched material to ensure equipment is properly set to produce required quality standards., • Delivers finished product (punched) to next operation within cell., • Orders tooling parts through communication with CAD as needed., • Works as part of the team and continuously seeks to identify and eliminate non-value added processes and waste., • Works in a safe manner, utilizing all required personal protective equipment., • Assist in all other areas of cell. Maintain flexibility to transfer to other cells to assist when needed. Education and/or experience: • HS Diploma/Equivalent, • Minimum 1 year similar work experience desired., • Basic mechanical aptitude and the ability to work with small hand tools. Must be dependable and have reliable transportation. • Comprehensive health, dental & vision coverage offerings, • Health Savings Account when elect a high deductible health plan -(with employer contribution), • Paid Vacation, Sick and Holiday Time, • Free Employee Assistance Program (EAP), • 401k Retirement Plan - (with employer contribution), • Full Time, Day Shift, $18.00 - $24.00 Apply today at: www.zehnder-rittling.com Zehnder Rittling is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. Zehnder Rittling will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of the business

Job Description Safetec of America, Inc. has been a trusted source of infection control, first-aid, and compliance products for over 30 years. We are a local, family-owned OTC pharmaceutical manufacturing company with a reputation for retaining employees, as we treat them like family. We are seeking a full-time 1st Shift Machine Operator to join our expanding team! 1st Shift: Monday - Thursday 6:00 am - 4:30 pm Competitive pay with excellent benefits, including generous paid time off. Responsibilities • Ability to detect equipment malfunctions or misalignments visually and by listening to the machine's noise, • Operating, adjusting, testing, and maintaining machines, • Communicate quality, material, and production issues to the supervisor, • Keep the area clean and organized at all times Required Skills and Work Experience: • Two or more years of experience in a manufacturing setting preferred, • Attention to detail and accuracy in work is a must, • Ability to lift at least 35 lbs., • Ability to push/pull using a pallet jack, • Ability to reach and bend frequently, • Ability to go up and down ladders, • Must have good verbal and written communication skills, • Mechanical ability, • Ability to work well with others

Job DescriptionRole Summary This role is responsible for operating and maintaining up to two precision grinding or machining systems including ancillary automation, auto gages, and wash equipment — while consistently meeting quality and productivity standards. The operator performs setups ranging from basic to advanced, conducts in-process inspections using calibrated gages, and carries out planned preventive and minor corrective maintenance. Key Responsibilities Maintain a safe and clean work area per 6S standards. Refer unusual or unsafe conditions to supervisor. Know appropriate level of shop math as required. Read and understand blueprints. Inspect work produced and show a genuine interest in producing quality work. Setup inspection gages such as Etalon Micrometer and profilometer. Have most of the tools of the trade. Operate and maintain (2) two machines with high standards of quality and quantity; (2) two grinders or (1) one grinder and (1) one broach or assembly machine. Operate and maintain ancillary equipment such as loader(s) (automation, robots), auto gage(s), and wash(s) (rinse, wash, rust inhibit) with high standards of quality and quantity. Hand load and hand pack. Take full swarf carts to processing area and bring empty swarf carts back to machines. Perform minor machine maintenance. (Planned Operator Maintenance and Preventive Maintenance) Maintain the Henry System, such as changing paper, checking fluid levels and fluid concentration. Recognize problems, correct them and make recommendations on how to prevent them to your supervisor or support engineer. (Machine, Material, Tool) Have a thorough understanding of speeds, feeds and tooling. Set-up basic jobs within a reasonable length of time without assistance. Set-up advanced jobs within a reasonable length of time with assistance. Maintain proper documentation and communications to ensure efficient coordination between shifts and departments (e.g. quality, engineering, maintenance) Orient when requested by supervisor. Lead when mutually agreed. Comply with all Quality Management System procedures and work instructions. Perform other related duties as requested by supervisor.

Job DescriptionDescription: The successful candidate will be a part of the production team. The Machine Operator will operate specific processing, packaging, portioning, conveying, and cooking equipment within specified parameters. Operators will be expected and required to run assigned equipment to obtain maximum productivity and quality while performing the following duties. Typically, assignments will be in a specific department and reporting will include an assigned production supervisor. The position requires an individual with several attributes, including: -Familiarity with mechanical applications -Ability to read and interpret documents such as safety rules, operating and maintenance instructions -Standing in a stationary position for an extended period of time -Some bending and lifting -Able to perform in high-stress situations -Able to lift 50+ pounds -Maintain production output goals -Team player Requirements: Job duties of a Production Machine Operator include: · Setting up line for production run · Lifting raw material cases of 50 pounds · Moving melters and equipment · Clearing and moving pallets · AWEMA One-Shot machine operation – The One-Shot deposits a filling inside a shell of chocolate. Responsibilities includes disassembling, washing, and reassembling the machine, learning a computerized menu of options, monitoring and troubleshooting · Selmi/Enrober operation – tempers chocolate · DoBoy Wrapper operation – wraps chocolate products Training and oversight is provided for all job duties.

Job Description Buffalo Biodiesel Inc. is in growth mode and currently seeking a Laser Machine Operator to join our team! This is a great opportunity to join a fast-growing business! We are seeking an experience Laser Machine Operator to work at our Tonawanda processing plant. Qualifications/Requirements: • High School Diploma or GED required, • 2+ years sand blasting experience required, • OSHA 10 or OSHA 30 preferred, • Hard Working, • Drug Free, • Able to lift 75lbs Responsibilities: • Operate laser machine to clean and strip equipment of grease, paint, rust and other deficiencies, • Assist in shop duties as needed, • Maintain a safe and clean work environment adhering to company standards and procedures Shift & Pay: • 1st shift: Monday to Friday 7am to 4pm. - Starting $50/hr Benefits: • Medical, Dental, and Vision Insurance., • 401k (with match), • Paid Time Off, • Growth Opportunities, • Opportunity for advancement into material handling and plant processing. Who We Are: Buffalo Biodiesel Inc. has been in business since 2005. We are a growing company that collects and recycles used cooking oil. With over 20 years in business, we collect, and process used cooking oil to produce Biodiesel, a carbon reducing alternative fuel to Hydrocarbons. We operate in 15 States with service to over 27,000 locations and growing. Buffalo Biodiesel Inc. is subject to and complies with the Federal Drug-Free Workplace Act. Job Type: Full-time Education: • High school or equivalent (Required) Experience: • 2+ years sand blasting required Work Location: In person

Job Description GTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safety I Quality I Customer Obsession I Speed I Agility Position Overview We’re seeking reliable Machine Operators skilled in CNC machinery and/or brake press operation to join our growing fabrication team. Operators will be responsible for setting up, running, and monitoring production equipment to shape, cut, bend, and finish metal components to strict specifications. This role supports end-to-end fabrication processes within GTI’s advanced manufacturing environment, contributing to production efficiency, quality output, and workplace safety. Key Responsibilties • Prepare, set up, and operate CNC machines (e.g., milling, routing, punching) according to work orders and engineering drawings., • Set up and operate press brake equipment for bending and forming sheet/plate metal to required dimensions and angles., • Load and align tooling, fixtures, and program parts based on engineering specs., • Inspect finished parts for quality, dimensional accuracy, and adherence to tolerances using measuring tools (calipers, micrometers, gauges)., • Perform routine maintenance and cleaning of machinery; report issues to maintenance/lead personnel., • Follow established safety protocols and maintain a clean, organized work area., • Collaborate with production team members and supervisors to meet daily production goals., • Document machine run times, material usage, and production data accurately.Requirements Required • Prior experience operating CNC machines and/or press brakes in a manufacturing or fabrication setting., • Basic understanding of machine setup, tooling changes, and part measurement., • Ability to read and interpret blueprints, technical drawings, and standard work instructions., • Comfortable using precision measuring tools., • Commitment to safety standards and quality outcomes., • Capacity to stand for extended periods and lift up to ~50 lbs. Preferred • Formal technical training or certification in machining, fabrication, or related fields., • Experience with industrial metal fabrication processes (sheet/plate steel).Familiarity with CAD/CAM or CNC programming fundamentals. Benefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. Perks & Benefits GTI offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy Policy Terms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description 2nd shift: Monday-Thursday 3:15PM-12:45AM, Friday 2:15PM-10:45PM (Every other Friday off) Summary A Production Team Assistant infuses training, development, and organizational goals into the leadership of the production floor. As a first impression to our valuable front line operators, a successful candidate will have a variety of attributes involving communication, leadership, management of workflow, safety, supervision, and technological aptitude. Essential duties and responsibilities • Demonstrate core values of organization and serve as role model for all associates., • Communicating (verbal and listening) with operators, management, process owners, and other peers., • Coordinates support efforts amongst production and engineering team when applicable., • Identifies training needs and arranges for training activities in responsible area(s)/department(s)., • Monitors training progress for trainer and trainee, ensures identified training is completed and maintains the employee-training matrix., • Ensure that the team is working well together including resolving basic Tier 1 employee conflicts and involving HR and/or the Supervisor involved when necessary., • Provide performance feedback to manager/supervisor for employee reviews., • Ensure that employees are managing expired materials in responsible area(s)/department(s), • Ensure that the employees are managing the review and recall of calibrated items in responsible area(s)/department(s), • Ensures all process related steps are completed with proper verification; electronic or manual signatures. When applicable perform any necessary ERP transactions such as but not limited to work in process receipts, work order splits, inventory adjustments, material issues, scrap, and labor transactions., • Completes defect and rejection forms and reviews with team members for opportunities of continuous improvement. Collects, reviews, and displays any other operational metric data applicable to running an effective and efficient area(s)/department(s)., • Attends meetings as production representative; such as but not limited to design review kick-off meetings, material review board, and production status meetings., • Monitors workflow and ensure team members are keeping the flow at an acceptable level., • Maintains a safe and compliant working environment., • Maintain tools and hardware ensuring team members have the proper components and equipment to perform their jobs efficiently, • Ensures all production parts are being handled according to the manufacturing instructions or work instructions, • Identifies and arranges lean events and continuous improvement measures in area(s)/department(s), • This position may require knowledge of SOX / 404 internal audit controls and related documentation., • Other duties as assigned. Qualifications • The ability to serve as a coach, mentor, role model for their own front line staff and others. Must be able to effectively communicate instructions to team(s) and listen to feedback. Must be willing to be a leader in the area(s)/department(s) and also work in a team environment with peers., • High School Diploma or GED, • Minimum 3-5 years of manufacturing experience., • Previous demonstrated leadership experience preferred but not required. Why You'll Enjoy Working Here: • Flexibility that works: 9/80 schedule with every other Friday off, • Professional growth: Continuing education support, certifications, and exposure to governance, risk, and compliance tools at a global scale., • A culture that values balance: Work with a high-performing, motivated team that also promotes positivity and collaboration., • Competitive rewards: Benefits start the first of the month after hire, quarterly bonus tied to company profitability, 401(k) with 3% company contribution, Employee Stock Purchase Plan, paid holidays (including a full Christmas week shutdown), and comprehensive health/vision/dental coverage. Why You'll Love Working Here • Enjoy a 9/80 schedule – get every other Friday off, • No weekend shifts – your time off stays yours, • Steady work in a clean, modern facility – bright, temperature-controlled, and organized, • Full benefits – health insurance, 401(k) match, paid time off, profit sharing, and more, • Culture of Balance & Growth – We believe in creating space for life outside of work while offering constant opportunities to sharpen your skills and grow your career., • Impact You Can See – Our designs will fly. Literally. Work on real products for real aircraft used around the world. Compensation & Benefits: • Hourly pay range: $22.00 - $28.00/hour with 10% shift differential, influenced by several factors including experience, skill set, education, certifications, market conditions, and business needs., • Competitive rewards: Benefits start the first of the month after hire, quarterly bonus tied to company profitability, 401(k) with 3% company contribution, Employee Stock Purchase Plan, paid holidays (including a full Christmas week shutdown), and comprehensive health/vision/dental coverage. Ready to Soar? Apply Today! We're looking for leaders ready to elevate aerospace engineering to the next level. If this sounds like the role for you, take the next step and join us in shaping technologies that touch the sky. Additional Considerations: • Due to federal contract obligations, this position may involve access to items subject to U.S. export-control laws. Employment is contingent upon the employee's authorization to access such items under applicable law. The company does not guarantee and is under no obligation to seek such authorization if it would be necessary., • An offer of employment is contingent on successfully passing a drug test and background check, • Ability to read, write and comprehend simple instructions and correspondence., • While performing the duties of this job, the employee is continually required to stand, walk, sit, use hands and arms to pull handles and push buttons and reach objects. Requirements may also include repetitive motions, climbing, balancing, stooping, bending, reaching, kneeling, crouching or crawling., • The employee must occasionally lift and/or move up to 30 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus., • Astronics LSI is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail LSINY.jobs@astronics.com; or call: 716-655-0800. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Astronics Corporation (Nasdaq: ATRO) serves the world's aerospace, defense, and other mission critical industries with proven, innovative technology solutions. Astronics works side-by-side with customers, integrating its array of power, connectivity, lighting, structures, interiors, and test technologies to solve complex challenges. For over 50 years, Astronics has delivered creative, customer-focused solutions with exceptional responsiveness. Today, global airframe manufacturers, airlines, militaries, completion centers and Fortune 500 companies rely on the collaborative spirit and innovation of Astronics. The Company's strategy is to increase its value by developing technologies and capabilities that provide innovative solutions to its targeted markets. For more information on Astronics and its solutions, visit www.Astronics.com. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

Hiring Immediately for Roofing Subcontractors - Are you leading a skilled roofing crew looking for consistent, year-round work? Erie Home, a top industry leader, is seeking reliable roofing subcontractors. We’ve been ranked among the Top 10 on the Qualified Remodeler Top 500 list for consecutive years. Why Work with Erie Home? • $2,000 Sign-On Bonus, • Earning Potential: Up to $100,000 per year, • Reliable Work: Full-time, year-round projects, • Job Support: Detailed job packets provided, • Weekly Pay: Direct deposits every week, • No Material Costs or Dump Fees: We cover it all Requirements: • General Liability Insurance, • Workman's Compensation Insurance, • EIN Letter, • Current Contractor’s License (if required by your state), • Reliable vehicle, roofing tools, and equipment required for job completion. Let's elevate your roofing business together. Apply now! Erie Home is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, political affiliation, sexual orientation, marital status, disability, age, military service, or any other protected class. If you need a reasonable accommodation due to a disability, please contact Human Resources with your request and contact information.

Job Description$2,500 SIGN-ON BONUS + EXCELLENT BENEFITS Get Out in the Field. Build Your Skills. Protect People & the Environment. NOCO – Buffalo, NY Full-Time | Non-Exempt $2,500 SIGN-ON BONUS - Available to qualified candidates with current 40-Hour HAZWOPER, OSHA 10-Hour, and Confined Space Entry certifications. Benefits & Perks That Make a Difference: At NOCO, we believe hard work in the field should come with strong benefits and support. • $2,500 Sign-On Bonus for qualified certified candidates, • Generous medical, dental & vision insurance, • HSA contribution options, • Company-paid life insurance, • Company-paid short-term disability, • 401(k) with company match, • Paid holidays, • Paid vacation, • Paid sick time, • Safety incentives, • Years-of-service incentives, • Company-provided PPE, • Boot allowance Opportunity to build valuable experience in environmental services, remediation, hazardous materials, industrial operations, and emergency response Not Interested in Sitting Behind a Desk All Day? If you'd rather be out in the field, working with a team, solving real problems, and doing work that makes an impact, this could be the opportunity for you. NOCO is hiring a dependable, safety-focused Environmental Field Technician in Buffalo, New York to support environmental cleanup, hazardous and non-hazardous material handling, emergency response, site remediation, equipment decontamination, and industrial field operations. You'll work at a variety of locations, which may include industrial facilities, wastewater treatment plants, chemical plants, construction sites, warehouses, oil fields, and power plants. No two days are exactly the same. This is a hands-on, physically active position where you'll gain exposure to multiple areas of environmental and industrial field services while working as part of an experienced team. What You'll Do: As an Environmental Field Technician, you will: • Collect, handle, transport, and dispose of hazardous and non-hazardous materials, • Work with waste chemicals, oil, sludge, contaminated materials, and other industrial waste, • Assist with hazardous-material spills and environmental emergency response, • Perform hazardous and non-hazardous waste cleanup, • Assist with environmental site remediation, • Perform equipment decontamination, • Follow local, state, and federal environmental and safety regulations, • Properly use required PPE and safety equipment, • Work in confined spaces when required, • Work at elevated heights using ladders, scaffolding, cranes, or other approved equipment, • Participate in safety training, emergency-response drills, and safety audits, • Communicate professionally with customers, • Complete assigned field projects safely and efficiently What We're Looking For: We're looking for people who are dependable, safety-conscious, adaptable, and ready to work. Candidates must be able to: • Perform physically demanding fieldwork, • Occasionally lift up to 50 pounds, • Work outdoors in varying Buffalo-area weather conditions, • Work indoors in non-climate-controlled industrial environments, • Work in confined spaces and at elevated heights, • Wear required company-issued PPE, • Wear safety glasses, hard hats, steel-toed footwear, gloves, Tyvek coveralls, and respirators when required, • Remain clean-shaven when necessary for a proper respirator seal, • Work independently when needed, • Follow detailed safety procedures and instructions, • Adapt to changing priorities, • Maintain a professional attitude when working with customers and team members Have These Certifications? You Could Qualify for a $2,500 Sign-On Bonus Qualified candidates with current: • 40-Hour HAZWOPER, • OSHA 10-Hour, • Confined Space Entry Certification may qualify for the $2,500 sign-on bonus. Additional preferred training and experience includes: • LOTO (Lockout/Tagout) training or certification, • Environmental field-services experience, • Emergency-response experience, • Hazardous or non-hazardous material cleanup, • Experience responding to releases affecting air, soil, or water, • Industrial cleaning or maintenance, • Environmental remediation, • Wastewater operations, • Oil-field experience, • Hazardous-material handling Don't have every preferred certification? Candidates who meet the core requirements and have relevant field, industrial, construction, environmental, or hands-on experience are still encouraged to apply. Schedule & Overtime Availability: Environmental and emergency-response work doesn't always fit into a traditional 9-to-5 schedule. Candidates must be willing to work: • Up to 12-hour days, • Variable schedules, • Nights when needed, • Weekends when needed, • Holidays when needed, • Additional hours during emergency-response situations or based on operational needs Build Your Environmental Career in Buffalo This isn't a job where you'll spend your day sitting behind a desk. You'll be doing meaningful, hands-on work while developing valuable experience in environmental cleanup, remediation, hazardous materials, emergency response, industrial safety, and environmental compliance. $2,500 Sign-On Bonus for Qualified Candidates • Excellent Benefits • Company-Provided PPE • Boot Allowance • 401(k) Match If you're dependable, safety-driven, and ready for hands-on work, apply today to join NOCO's Environmental Field Operations team in Buffalo, New York. NOCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other status protected by applicable law. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position.

Job Description CDL A Drivers - Part Time Buffalo, NY Wolverine Trucking Offers: • Ability to be home after every shift, • Available schedule: Weekends, • Weekly pay, • Steady work, year round, • $1,000.00 sign on bonus ($500.00 after successful completion of probationary period and $500.00 after 1 year of employment) At Wolverine we work for internal and external customers, so there is the potential to be constantly busy transporting bulk sand to a variety of locations. We offer competitive wages, a comprehensive group benefit program, and 401(K)-matching. We are currently searching for logistic professionals to complement our team in Buffalo, NY. Responsibilities: • Safely operate a tractor-trailer truck., • Haul various bulk sand material., • Properly track and document activity log., • Inspect truck before and after trip., • Report any issues or incidents to operations manager. Skills and Requirements: • Commercial driver's license (Class A) is mandatory., • Minimum one-year truck driving experience under CDL A license preferred., • Experience with sand box hauling is preferred., • Ability to drive tractor-trailer on multiple routes., • Must be able to perform routine inspection of the vehicle., • Acceptable drivers abstract., • Ability to handle physical workload., • Strong work ethic., • Communicate effectively., • Flexibility to work weekends an asset. Must be able to pass a pre-employment background check, physical, and drug screen.

Job Description CDL A Drivers – Buffalo, NY Wolverine Trucking Offers: • Ability to be home after every shift, • Available schedule: 6:00 p.m. - 6:00 a.m. (night shift), • Weekly pay, • Steady work, year round, • $3,000.00 sign on bonus ($1,500.00 after successful completion of probationary period and $1,500.00 after 1 year of employment) At Wolverine we work for internal and external customers, so there is the potential to be constantly busy transporting bulk sand to a variety of locations. We offer competitive wages, a comprehensive group benefit program, and 401(K)-matching. We are currently searching for logistic professionals to complement our team in Buffalo, NY. Responsibilities: • Safely operate a tractor-trailer truck., • Haul various bulk sand material., • Properly track and document activity log., • Inspect truck before and after trip., • Report any issues or incidents to operations manager. Skills and Requirements: • Commercial driver's license (Class A) is mandatory., • Minimum one-year truck driving experience under CDL A license preferred., • Experience with sand box hauling is preferred., • Ability to drive tractor-trailer on multiple routes., • Must be able to perform routine inspection of the vehicle., • Acceptable drivers abstract., • Ability to handle physical workload., • Strong work ethic., • Communicate effectively., • Flexibility to work weekends an asset. Must be able to pass a pre-employment background check, physical, and drug screen. #ZR

Job DescriptionAssembler ???? Cheektowaga, NY ???? 2nd Shift: 3:00 PM - 11:30 PM ???? $22-$29/hr Benefits • Medical, Dental & Vision Insurance, • Competitive Pay, • Brand New, Climate-Controlled Facility, • Clean, Well-Lit Work Environment, • Stable Company with Growth Opportunities???? What You'll Do, • Assemble industrial cooling and electro-mechanical systems, • Read work orders, blueprints, and build instructions, • Use hand and power tools to build components, • Assemble frames, piping, wiring, and cooling units, • Inspect products for quality and accuracy, • Document production and inspection results, • Package finished products for shipment What We're Looking For, • Mechanical assembly or manufacturing experience, • Ability to read blueprints and drawings, • Experience using hand and power tools, • Quality inspection experience, • Ability to lift, move materials, and stand throughout the shift???? Work Environment, • Modern manufacturing and warehouse facility, • Climate-controlled and safety-focused, • Work with advanced cooling and thermal management systems, • Regular lifting, walking, and material handling, • Use pallet jacks and hand trucks, • PPE required (steel-toe or safety-toe footwear), • Organized, clean workspace following 6S standards???? Ideal Candidate Someone with assembly, manufacturing, production, or mechanical experience who is comfortable using tools, reading blueprints, and working in a fast-paced environment while building high-quality products. Job Type & Location This is a Contract position based out of Cheektowaga, NY. Pay and Benefits The pay range for this position is $22.00 - $29.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cheektowaga,NY. Application Deadline This position is anticipated to close on Oct 12, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionIMMEDIATE HIRING ASSEMBLER STARTING PAY $17/HR START ASAP!! Department: Production Reports To: Production Supervisor Status: Non-Exempt, Hourly Pay Rates & Shifts1st Shift • Hours: 7:00 AM - 3:30 PM, • Pay: $17.00/hour2nd Shift, • Hours: 3:00 PM - 11:30 PM, • Pay: $17.50/hour3rd Shift, • Hours: 11:00 PM - 7:30 AM, • Pay: $17.50/hourPosition Summary The General Assembler I is responsible for performing basic assembly, inspection, and packaging tasks to support production operations. This role follows established procedures, works under close supervision, and contributes to meeting daily production goals with accuracy and consistency. Essential Duties & Responsibilities • Perform routine assembly tasks including applying parts, manual and machine hole punching, and removing waste material., • Inspect, count, bundle, wrap, and package finished components according to quality standards., • Enter accurate production data into ERP or related systems., • Follow detailed work instructions and established processes for each job., • Maintain a clean and organized work area and handle materials safely., • Assist with basic problem-solving within assigned tasks., • Complete required paperwork and documentation., • Participate in training as needed and support new team members when requested., • Perform other duties as assigned by management.QualificationsMust-Haves, • Ability to follow detailed written and verbal instructions., • Basic math and measurement skills., • Strong manual dexterity and comfort performing repetitive tasks.Candidate Qualities, • Reliability and Consistency: Dependable, punctual, and steady in work output., • Attention to Detail: Careful, thorough, and committed to producing high-quality work.Education & Experience, • High school diploma or GED required.Physical & Work Requirements, • Ability to stand, walk, bend, and perform repetitive hand motions for extended periods., • Ability to lift up to 25 pounds independently and occasionally more with assistance., • Ability to work in a production environment requiring focus, consistency, and adherence to safety standards., • Visual requirements include close vision, peripheral vision, depth perception, and the ability to adjust focus.Why Join Our Team?, • We offer stable full-time employment, competitive wages, hands-on training, and opportunities to grow within a manufacturing environment that values safety, teamwork, quality, and reliability. Join a team where your contributions directly impact our success every day. Job Type & Location This is a Contract position based out of Buffalo, NY. Pay and Benefits The pay range for this position is $17.00 - $17.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Buffalo,NY. Application Deadline This position is anticipated to close on Oct 13, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Responsibilities: USRC's greatest strength in being a leader in the dialysis industry is our ability to recognize and celebrate the differences in our diverse workforce. We strongly believe in recruiting top talent and creating a diverse and inclusive work climate and culture at all levels of our organization. The Biomedical Technician is responsible for overseeing the overall operational condition, maintenance and repair of all water treatment equipment, all medical equipment and mechanical/electrical systems to ensure patient safety and the safety of all staff operating such equipment for their assigned clinic(s). ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties and tasks may be assigned. • Demonstrate effective use of supplies and staff labor hours., • Assist with purchasing as needed: place orders, perform weekly and month end inventory counts., • Be familiar with the overall procedures used in Inventory Control (FIFO) and assist in the documentation and control of excess inventory., • Perform duties as assigned to meet the patient care or operational needs of the clinic., • Troubleshoot, repair and maintain equipment as recommended by the manufacturer., • Repair, calibrate, test, clean and disinfect dialysis machines, water distribution loop and RO's according to protocol., • Perform water quality checks to include but not limited to: free chlorine, total chlorine, and water hardness testing., • Perform safety checks and tests on all pretreatment water equipment including but not limited to carbon tanks, water softeners, RO units, UV lamps and ultrafilters., • Collect samples of RO water and dialysate for microbiology testing according to protocol., • Collect water samples for AAMI analysis testing according to protocol., • Disinfection of central bicarbonate system and mixing tank according to protocol., • Disinfection of RO, distribution system, and hemodialysis machines according to protocol., • Perform duties at all times within limitations established by and in accordance with company policy and procedures, applicable state and federal laws and regulations., • Perform electrical safety on dialysis machines and related equipment., • Be familiar with instruction manuals and operation for equipment in accordance with manufacturer's recommendations. Be capable of starting up and shutting down facility's equipment if necessary., • Maintain established preventative maintenance programs and required support documentation., • Maintain accurate maintenance records for the facility's equipment., • Have knowledge of the function and safe operation of water treatment equipment and related mechanical and electrical systems., • Address physical environment issues which could impact patient and staff safety., • Mix bicarbonate solution according to protocol. Mix acid concentrate solution according to protocol., • Assist in receiving, storing and stocking of supplies., • Be familiar with all emergency equipment and emergency operational procedures., • Use appropriate safety measures including personal protective equipment as necessary., • Be familiar with OSHA regulations., • Update Material Safety Data Sheets (MSDS) as required., • Be aware of all contracts and contacts necessary for the emergency repair of the clinic's equipment and mechanical systems., • Obtain quotes from reputable and approved contractors as needed to address physical environment issues., • Present technical summaries in QAPI meetings., • Maintain collaborative working relationship with Administrator(s). Partner with Administrator(s) to ensure clinic needs are met., • Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization., • Respond effectively to inquiries or concerns., • Participate in staff meetings as required. Attend in-service and continuing education offerings in compliance with company policy and procedure., • Complete initial and annual technical training on clinical staff as required., • Instruct staff in use and care of equipment and answer questions., • Participate in team concepts and promote a team effort. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Requirements include: • High school diploma or equivalent., • Valid driver' license in applicable state. License must be maintained as current, without restrictions and good driving record., • Previous dialysis, hospital, or medical experience preferred., • Confirmation of ability to distinguish all primary colors., • Ability to react and perform under stress and in emergency situations., • Ability to communicate and interface effectively with others., • Demonstrated working knowledge of the English language and ability to communicate verbally and in writing., • Ability to work independently as well as with others to plan and organize work assignment. U.S. Renal Care is an Equal Opportunity Employer/Disabled/Veteran. Benefit Details All Full-Time employees are eligible for the following benefits: • Medical / Pharmacy, • Dental, • Vision, • Voluntary benefits, • 401k with employer match, • Virtual Care, • Life Insurance, • Voluntary Benefits, • PTO All Part Time employees are eligible for the following benefits: • 401k with employer match, • PTO Pay Range: USD $23.96 - USD $35.95 /Hr. Company (Career Site Brand): U.S. Renal Care

Job Description Express Employment Professionals are currently seeking Warehouse Associates for a local distribution company in Tonawanda, NY. Hours: Monday-Friday 7:00am-3:30pm Starting Pay: $18.50 per hour Job Overview: Works to assure safe and accurate warehouse operations in shipping, receiving, inventory counting and material handling. Responsibilities • Receive shipments, and verify correct quantities to shipping documents, • Accurately record shipment information in the company system, • Report shipment discrepancies and issues to the manager, • Accurately fill orders using shelf inventory and safely package materials for shipping, • Utilize third-party logistics software to generate shipments, • Appropriately store materials in the correct warehouse locations, • Perform inventory counts, identify, and record discrepancies, • Work with internal departments to investigate and resolve inventory discrepancies Requirements • High school diploma or equivalent preferred, • Experience in warehousing, shipping, or receiving preferred but not required, • Understanding inventory management is desirable, • Proficient with Microsoft Suite and similar computer programs, • Valid driver’s license, • Able to work with little to no supervision to complete assigned tasks, • Good written and oral communication skills and excellent organizational skills, • Able to stand, walk and move for extended periods Interested and qualified applicants are encouraged to apply directly to this posting or contact our office for an interview appointment! \nCompany Description Express is a staffing service with franchise offices worldwide. We employ people to work short-term and long-term assignments for a variety of companies. Express is a staffing service with franchise offices worldwide. We employ people to work short-term and long-term assignments for a variety of companies.

Job Description CSI Sands (N.E.) /Wolverine Trucking provides a full range of aggregate and resource materials production services. We are equipped to handle every phase of the materials engineering process, from initial exploration to delivery of the end-product. We are currently searching for a Materials Dispatch Coordinator (Night Shift) to complement our team at our site in Buffalo, NY. This position will report to the Operations Manager. Responsibilities: • Take sand samples at various locations in the plant facility., • Complete sieve analysis of all plant operational sand samples., • Ensure sample containers are properly labeled and ready for sampling of all boat loads., • Complete analysis of all boat load shipments., • Complete all calibration testing on required lab equipment., • Report to Facility Manager and Shift Supervisors all Quality Control Issues., • Serve as the first point of contact for operational issues involving drivers and railyard personnel, escalating matters to management as required., • Coordinate work schedules for drivers and rail crews, communicate assignments, and obtain required signoffs., • Review and verify transportation documentation, including daily logs, inspection reports, delivery receipts, and shipping paperwork., • Monitor job progress, operational performance, and transportation costs, providing regular reports to Management., • Assist in resolving product, material, and equipment issues that impact fulfillment or delivery., • Identify operational challenges and recommend process improvements to increase productivity, safety, and service quality., • Perform other duties as assigned. Additional Responsibilities: • Provide on-the-job training to new employees for working in the lab., • Complete testing on various samples from new raw material sources as needed., • Complete other tasks as assigned to maintain plant safety and maintenance control. Skills: • Ability to read and interpret schematics of the plant process., • Communicating effectively with co-workers, subordinates, and superiors., • Basic reading, writing, and arithmetic skill required. This is normally acquired through a high school diploma or equivalent., • Ability to complete Quality Control sampling required in all plant areas., • Basic mechanic skills needed to open and close all sampling points., • Manual dexterity required for operating lab equipment and computers. License Requirements • The position requires the possession and maintenance of a valid New York drivers license and a satisfactory driving record. Physical Requirements and Working Conditions: • Must possess mobility to work in an operating industrial minerals plant / plant trailer., • Must be able to use standard office equipment including a computer and calculator., • Must be able to read materials in print and on a computer screen., • Must be able to communicate in person, over the telephone and radio., • Must be able to lift 50 pounds. Education and Experience: • High School diploma or GED We encourage all who are qualified and interested to apply in confidence; however, only those in consideration will be contacted.

Job Description GTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safety I Quality I Customer Obsession I Speed I Agility Preform a combination of tasks including but not limited to receiving, filling, shipping, and inspecting orders accurately and in a timely manner; efficiently and safely loads, unloads, and conveys materials. Key Responsibilities • Receives, locates, and transfers materials accurately and in a timely manner., • Opens containers utilizing hand tools as needed; counts and weighs materials and records information., • Identifies damaged materials and records material shortages., • Loads and unloads materials onto and from a variety of containers including but not limited to trucks, conveyors, racks, pallets, and/or trays; utilizes appropriate tools to accomplish task., • Transports incoming and outgoing materials to designated areas utilizing appropriate tools/vehicles to accomplish task including but not limited to wheelbarrow, hand truck, forklift, electric dolly, and/or elevator., • Assists machine operators as needed by lifting heavy objects by hand or by use of power hoist., • Stacks and assembles materials., • Maintains a safe, clean working environment., • Participates in quality improvement efforts., • Operates forklifts and overhead cranes., • Performs required administrative tasks; prepares all required reports and correspondence., • Performs other related duties as assigned by management.Requirements, • One to two years related experience or equivalent., • Familiarity with shipping practices and handling methods., • Forklift certified., • Ability to work with minimal supervision., • Commitment to excellence and high standards, • Excellent written and oral communication skills, • Strong organizational, problem-solving, and analytical skills, • Ability to manage priorities and workflow, • Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm., • Proven ability to handle multiple projects and meet deadlines, • Strong interpersonal skills., • Ability to understand and follow written and verbal instructions. Preferred Qualifications: • Prior experience in metal fabrication industry, • Familiarity with international shipping requirementsBenefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership #ZR GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy Policy Terms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. \nCompany Description GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description The Warehouse Forklift Operator plays a crucial role in ensuring efficient warehouse operations through safe forklift operation and effective material handling. Reporting to the Warehouse Manager, this position involves managing inventory, performing equipment inspections, and facilitating order picking, loading, and unloading processes. The role requires adherence to safety protocols and participation in weekly equipment maintenance, with shifts available during the day or night. Responsibilities • Operate forklifts safely to move materials within the warehouse, • Manage inventory by accurately tracking and handling stock, • Ensure compliance with safety standards and protocols, • Conduct regular weekly equipment inspections and maintenance, • Handle materials efficiently for loading and unloading shipments, • Pick orders accurately to fulfill shipment requirements, • Assist with shipping and receiving activities Preferred Qualifications • Minimum 1 year of experience in warehouse operations\nCompany Description Staffing Solutions is your go to company in finding you your next career. Staffing Solutions is your go to company in finding you your next career.

Job DescriptionJOB SUMMARY We are seeking a dependable and detail-oriented Receiver to join our team in Tonawanda, NY. The Receiver plays a key role in ensuring the smooth flow of materials into our facility. This position is responsible for inspecting incoming shipments, verifying documentation, recording deliveries in inventory systems, and coordinating with other departments to keep operations running efficiently. ESSENTIAL JOB FUNCTIONS • Verify contents of shipments against purchase orders, packing slips, and other documentation., • Inspect goods for damage, shortages, or quality concerns; escalate issues as needed., • Accurately record all receipts in inventory management systems., • Tag, label, and stage materials for storage or direct distribution to departments., • Collaborate with the Crib Attendant, Warehouse, and Maintenance teams to ensure accurate stocking and timely part availability., • Use Microsoft Excel for tracking, reporting, and documentation., • Assist with cycle counts, physical inventories, and maintaining stock accuracy., • Maintain cleanliness and organization in receiving and storage areas., • Operate forklifts, pallet jacks, or other material handling equipment (training/certification provided if required)., • Follow all company safety and security procedures. QUALIFICATIONS: • Required:, • High school diploma or equivalent., • Prior experience in shipping/receiving, warehouse, or inventory roles., • Strong attention to detail and organizational skills., • Basic computer skills; proficiency with Microsoft Excel., • Good communication and teamwork skills., • Commitment to workplace safety. Preferred: • Familiarity with SAP or other Warehouse/Inventory Management Systems (WMS)., • Forklift certification or willingness to obtain., • Experience conducting cycle counts and maintaining accurate inventory records. WORK ENVIRONMENT: • Warehouse/receiving dock environment with varying temperatures and conditions. ESSENTIAL PHYSICAL DEMANDS: • The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions., • Lift, handle, and carry materials, equipment, and supplies as necessary up to 50-75 pounds., • Sit, stand, bend, lift, push, pull, stoop, walk, reach, and move intermittently during working hours., • Coordination necessary to operate computers and office equipment with pushbuttons and/or touch screens. ESSENTIAL COMMUNICATION SKILLS: • Read and interpret documents., • Read a diverse amount of printed and computer material., • Communicate effectively and listen attentively., • Establish and maintain effective and harmonious working relationships with internal and external contacts., • Communicate effectively, verbally and in writing. ESSENTIAL INTERPERSONAL SKILLS: • Trustworthy, • Desire for continuous improvement, • Ability to accept performance feedback, • Goal and deadline oriented, • Ability to adapt to change, • Detail-oriented, • Service-focused, • Team-oriented GENERAL REQUIREMENTS AND/OR DISCLAIMERS: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities and duties of personnel so classified. Other duties may be assigned by the direct supervisor and/or designee. HOURS OF EMPLOYMENT: 11 am to 7:30 pm. Monday- Friday with rotating weekends. BENEFIT INFORMATION: • The position offers an attractive benefit package that includes medical insurance (Blue Cross Blue Shield PPO, HMO and Health Savings plan options available), dental coverage, vision coverage, life insurance, short-term disability, and long-term disability plans on the first of the month following the date of hire. Paid time off and 401K plan offered upon reaching eligibility. EEOC STATEMENT: • Ideal Setech, LLC is an equal opportunity employer and complies with all laws prohibiting discrimination on the basis of such factors as race, color, age, sex, national origin, religion, citizenship, handicap, height, weight and marital status. Under the State Persons with Disabilities Act and the Federal Americans with Disabilities Act, an employer has a legal obligation to accommodate an employee’s or job applicant’s disability unless the accommodation would impose an undue hardship on the employer. A person with a disability may allege a violation against an employer regarding a failure to accommodate his or her condition under Michigan law only if the person notifies the employer in writing of the need for accommodation within 182 days after the date the person knew or reasonably should have known that an accommodation was needed.

Job Description Come work with the best! At Maine Drilling & Blasting we work with the unity of family and the determination of business owners. As a majority Employee Owned company we provide a unique and generous array of benefits including two retirement plans, an Employer-contributed Stock Ownership Plan (ESOP) and company matched 401(k). In addition to health, dental, vision, life, and disability benefits, we also offer training and development opportunities. The sky is the limit, come rock your career at MD&B! Our core values of Respect, Fairness, Honesty, and Responsibility provide a firm cultural foundation as we relate to customers and each other as we Make it Happen! LICENSED BLASTER- Pay: Salary DOE plus company vehicle. Performs blasting activity in accordance with job program to achieve anticipated production. This position supports the direction of the Blasting Supervisor and Project Superintendent. Reports blasting results and status to Project Superintendent or Blasting Supervisor for input and direction. Responsibilities: • Performs assigned blasting activities., • Works as a job site blaster and receives direction from Blasting Supervisor and/or Project Superintendent, • Provides input on blast-related activities to aid direct supervisor in plans, • Identifies blast site problems and resolves with Blasting Supervisor or Project Superintendent, if necessary, • Verifies that pre-blast inspections have been conducted prior to blasting, • Performs all necessary pre-blast tests and seismograph setup as needed, • Understands and follows all Company safety policies and practices, • Places supply and material requests through Blasting Supervisor or Project Superintendent as needed, • Monitors the relationship between blast pattern and type of digging and reports results to Blasting Supervisor or Project Superintendent, • Documents use of explosives and completes required inventory paperwork, • Expected to transport explosives across state lines, as needed, • Is responsible for completing field accounting reports and required trip manifest forms as needed, • All other duties as assigned, • Attends company meetings as required, • Participates in daily heads up safety meetings Qualifications High School Degree Minimum of two years experience working with drills and explosives Must have completed Blaster I training and will be required to take Blaster II training Possess a Valid Blasting Certificate in states that require this Must have good communications skills Must hold a valid CDL with hazmat endorsement and is a Company-qualified driver (able to transport explosives across state lines) and has a good driving record as defined by the Company insurance carrier Out of town/state travel Must successfully pass ATF screenings Has a thorough understanding of blasting techniques: blast design, loading holes, select and operate electric and non-electric detonators, demonstrate grade & elevation readings, secure blast site, identify explosives, demonstrate pop shooting Proficient in all areas of drill operations Physical Requirements • Ability to perform essential functions of the position, • Ability to lift 50 lbs., 30 - 40% of the time, • Work on uneven and loose surfaces in varying weather environments, • Stooping and bending 30 – 40% of the time Skeptical about advancement opportunities? Check out these videos: • Dante (CST) talks about what it’s like to work at MD&B: https://www.youtube.com/watch?v=zrSWPW4Qbgo, • Dan (CEO) talks about career advancement opportunities: https://www.youtube.com/watch?v=gvloIft9KPY Does this sound like you? If it does, then go ahead and hit that APPLY button because we cannot wait to meet you!

Job Description Buffalo Biodiesel Inc. is in growth mode and currently seeking General Laborers to join our team! This is a great opportunity to join a fast-growing business! We are seeking entry level general laborers to work at our Tonawanda processing plant. Qualifications/Requirements: • High School Diploma or GED Required, • Forklift Experience Preferred, • Hard Working, • Drug Free, • Able to lift 75lbs Responsibilities: • Dump drums, empty buckets, and small retail packaging, • Clean floors, help unload trucks and trailers, and clean equipment Shift: • 1st shift: Monday to Friday 7am to 4pm. - Starting $25/hr Benefits: • Medical, Dental, and Vision Insurance., • 401k (with match), • Paid Time Off, • Growth Opportunities, • Opportunity for advancement into material handling and plant processing. Who We Are: Buffalo Biodiesel Inc. has been in business since 2005. We are a growing company that collects and recycles used cooking oil. With over 20 years in business, we collect, and process used cooking oil to produce Biodiesel, a carbon reducing alternative fuel to Hydrocarbons. We operate in 15 States with service to over 27,000 locations and growing. Buffalo Biodiesel Inc. is subject to and complies with the Federal Drug-Free Workplace Act. Job Type: Full-time Education: • High school or equivalent (Required) Work Location: In person

Job DescriptionBenefits: • Health insurance, • Paid time off, • 401(k), • 401(k) matching, • Flexible schedule Job Summary: The Warehouse Associate is a professional who is responsible for fulfilling the logistics behind receiving, processing and storing inventory according to purchase orders and store policy. This associate will also be responsible for setup, operation and monitoring machines daily inside of the warehouse. Duties/Responsibilities: · Retrieve the proper material in coordination with machine production · Pull/prep orders for shipment · Receive, verify, and stock all incoming material · Return inventory after production to the correct location · Communicate regularly with team members and management regarding concerns, discrepancies, and continuous improvement ideas · Ensure warehouse is clean, organized, secure and safe at all times · Other duties as assigned Required Skills/Abilities: · Ability to push, pull, and lift product using material handling equipment · Attention to detail Education and Experience: · High school diploma or equivalent. · A background in warehouse operations, including shipping, receiving and inventory is required · Working knowledge of safety regulations and procedures · Product knowledge or the ability to quickly learn · Forklift operator experience is a plus Physical Requirements: · Ability to lift 50 lbs. · Ability to stand/walk entire shift

Job DescriptionDescription: Carrier Process Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment solutions. Please visit us at https://www.cpeg.com/ to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are seeking a full-time Warehouse Clerk at our Tonawanda, NY location. The Warehouse Clerk is responsible for receiving, shipping, storing and distributing material, equipment and products within the facility, ensuring accuracy and timeliness of all job functions. Responsibilities • Assist shipping and receiving unloading trucks, checking in merchandise, matching purchase orders, • Read work orders, shipping orders or requisitions to determine items to be moved, gathered or distributed and/or shipped., • Move materials and items from receiving or storage areas to shipping or other designated areas., • Sort and place materials or items on racks, shelves or in bins according to predetermined sequence such as size, type, style, color or product code., • File requisitions, work orders or requests for materials, tools or other stock items., • Assemble customer orders from stock and place orders on pallets or shelves, or relocate orders to a holding area or fabrication department., • Mark materials with identifying information using appropriate method., • Open bales, crates and other containers., • Record amounts of materials or items received or distributed via appropriate ERP system., • Assist in counting of physical inventory., • Weigh and count items for distribution within plant to ensure conformance to company standards., • May be assigned facilities maintenance duties as needed, • Prepare parcels for mailing., • Performs related duties as assigned by supervision, • Safety and housekeepingRequirements:, • High School Diploma, or equivalent, • One year prior warehouse clerk experience, • SYTELINE ERP Experience is a plus, • Develop professional and process expertise to provide improved assistance to internal and external customers;, • Knowledge of the workplace safety system;, • Able to work under little supervision;, • Understands and able to utilize mathematical formulas required to perform job., • Able to use a level and tape measures;, • Knowledge of general manufacturing safety rules; proper use and handling of job related safety equipment;, • Able to safely operate forklift and overhead crane;, • Able to understand and carry out detailed written or oral instructions;, • Demonstrates team building, problem solving, communication, time management skills;, • Excellent communication skills both written and verbal; Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them., • Cash Balance Pension Plan. We contribute to this retirement savings on your behalf—no employee contribution required. Combined with a guaranteed 4% rate of return, this means you receive a consistent and valuable retirement benefit every year. CPEG Buffalo LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to actual or perceived: race (including traits historically associated with race, such as hair texture and protective hairstyles), color, creed, religion (including wearing attire, clothing or facial hair in accordance with the tenets of religion), sex (including pregnancy, childbirth or related medical conditions and transgender status), gender identity or expression, reproductive health decisions, familial status, national origin, physical or mental disability (including gender dysphoria and being a certified medical marijuana patient), genetic information (including predisposing genetic characteristics), age (18 and over), veteran status, military status, sexual orientation, marital status, certain arrest or conviction records, domestic violence victim status and any other status protected by law. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job DescriptionDescription: ABOUT US Since 1935, Ferguson Electric has been providing the Western New York region with exceptional electric repair and construction services. We have the experience and skill to be our customer’s “connection to quality”. Our professional team has handled a majority of the construction and service contracts for the commercial and industrial facilities in the area. We have the skill, experience, and the dedication to properly address all electrical repair and construction needs. ABOUT THE ROLE Ferguson Electric’s Material Specialist reports to the Warehouse/Shop Manager and performs duties associated with warehouse operations, including receiving, storing, and distributing products and materials, as well as driving to deliver materials to job sites. The ideal candidate will possess excellent organizational skills, a strong work ethic, and the ability to thrive in a fast-paced environment. all while strongly upholding and promoting the organization's core values. WHAT YOU WILL DO • Warehouse Operations:, • Receive and inspect incoming shipments, ensuring accuracy and quality., • Maintain accurate inventory records and perform regular counts., • Pick, pack, and prepare orders for shipment, meeting customer deadlines., • Safely operate warehouse equipment and follow proper handling procedures., • Driving and Delivery:, • Drive company vehicles to deliver supplies to project sites., • Load and unload products, ensuring proper handling and security., • Verify the accuracy of outbound shipments against order documentation., • Adhere to traffic laws, safe driving practices, and delivery schedules., • Warehouse Maintenance and Safety:, • Keep the warehouse clean, organized, and optimized for space utilization., • Adhere to safety protocols, including handling hazardous materials., • Identify and report safety hazards or equipment malfunctions., • Collaboration and Communication:, • Collaborate with team members to streamline warehouse operations., • Communicate effectively with colleagues, supervisors, and project managers., • Provide support to other departments and participate in team meetings. ABOUT YOUR QUALIFICATIONS • High school diploma or equivalent., • Proven experience in a warehousing or logistics role is preferred., • Proficiency in operating forklifts and other warehouse equipment., • Strong attention to detail and accuracy., • Ability to perform physical tasks such as lifting, carrying, and moving heavy items., • Excellent organizational and time management skills., • Good communication and interpersonal abilities., • Adherence to safety protocols and procedures. Ferguson Electric recognizes the value of diversity in our workforce. We are committed to equal opportunity. We consider all qualified employment applicants without regard to race, religion, color, gender, age, national origin, sexual orientation, gender identity, partnership status, protected veteran status, disability, or any other status protected by federal, state, or local law. Individuals who hold legal work authorization applicable to employment at Ferguson Electric in the United States will be considered without regard to citizenship/alienage. Requirements: ABOUT YOUR QUALIFICATIONS • High school diploma or equivalent., • Proven experience in a warehousing or logistics role is preferred., • Proficiency in operating forklifts and other warehouse equipment., • Strong attention to detail and accuracy., • Ability to perform physical tasks such as lifting, carrying, and moving heavy items., • Excellent organizational and time management skills., • Good communication and interpersonal abilities., • Adherence to safety protocols and procedures.

Job Description API Heat Transfer is looking for people who enjoy being part of transformation. We have a new mission, new leaders, and are accelerating our path to Lean Cultural Change. Our Operations Team is on the way to becoming a Lean Management powerhouse! If you like to fix things, and want to be part of a new API, we'd love to talk to you about our Crib Attendant B - 2nd shift position! At API we take our culture transformation seriously! To help find the best fit for our positions and organization, we ask that you complete our 10 minute Culture Index Survey. Simply follow the link after submitting your application to help us use our interview time to dive deeper into your job behaviors and work history. https://go.cultureindex.com/s/7Y0awCvsZZ What We Offer You: • Starting wage $25.72/hour, incremental increases move to $28.10 after one year, • Shift differential of $1.75 for second shift, • Be part of leading-edge technology for the heat transfer industry, • Career development and advancement, • Multi-site, global operations to learn!, • Ability to impact customers across multiple industries, • Full health & welfare benefits, PTO What Can Our Location Offer You: • Only 20 minutes from the beautiful Buffalo waterfront and 45 minutes from Niagara Falls, • In house market style cafeteria with plenty of healthy selections, • Buffalo is known for our wide range of choices for food and beverages from our famous Buffalo Wings and Beef on Weck to several micro-breweries and distilleries scattered across the region What You Will Do: • Assist in loading and unloading trucks., • Move rough and finished material from any area or department to proper storage area (such as stock room, outside storage area and racks throughout the shop)., • From a production schedule and / or supervisor’s instruction, gather parts (for contract or shop order) and deliver to proper department. Mark B/M or shop order copy that material has been issued out and turn in to Material Control office, requisitions connected with same – indication quantity issued, date and initial., • Gather and package spare parts orders and return goods for shipping per instruction., • Operate all material handling equipment such as crane (excluding cab), forklift and carts., • Checks tools in and out of stock room when this becomes stock room function., • Maintain storage area clean and in orderly fashion., • Perform weekly inventory accuracy audit via cycle count following company procedures, • Performs closely related duties as assigned Minimum Requirements: • GED or High School diploma, • Two (2) years working in shipping and receiving departments, • Forklift operation, • Familiar with warehouse management systems, • Good verbal and written communication skills, • Detail orientated, • Ability to work well with others Physical Requirements: • Ability to lift and carry heavy items, • Stand and walk for extended periods, • Perform repetitive tasks such as bending, stooping and reaching INDZ

Job Description Overview Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring a General Helper. The General Helper will be responsible for executing a wide range of operational and support duties within the manufacturing facility, including equipment operation, material handling, and general labor. This position plays a key role in maintaining productivity, ensuring product quality, and supporting safety and continuous improvement initiatives. This role is located in Buffalo, NY and will be fully on-site. Hourly Pay Range: $26.75 Work Schedule: 6am-4pm, 4pm-2am Monday-Thursday Pay Schedule: Weekly At Wieland, we recognize that attracting the best talent is key to our strategy and success as a company. As a result, our ranges reflect our good faith estimate to pay fairly. The final pay offered to a successful candidate will be based upon various factors unique to each individual that may include but are not limited to years of experience, industry knowledge, technical skills, education, qualifications, etc. Responsibilities General Helper Responsibilities: • Provide flexible operational support across the facility by filling in for absent personnel or unassigned roles as needed., • Perform a variety of production tasks primarily within the lower end of the mill, supporting copper and copper alloy processing operations., • Operate equipment and perform duties such as Operator, Helper, Inspector, and slitter operator., • Safely operate mobile and heavy equipment as required., • Execute physically demanding tasks, including heavy manual labor in a fast-paced industrial environment., • Load, move, and handle raw materials and byproducts such as gravel, scrap, or metal chips., • Perform job duties that may require bending, lifting, carrying, climbing, and working in confined spaces or at elevated heights., • Transition into assigned roles based on operational needs, seniority bidding, or management direction., • Perform a wide range of bargaining unit job functions to support plant operations and workforce flexibility., • Monitor product quality and make real-time decisions when necessary to address quality concerns and ensure compliance with specifications., • Actively participate in continuous improvement initiatives aligned with ISO 14001, ISO 45001, and ISO 50001 standards., • Contribute to workplace safety and operational excellence by engaging in near-miss reporting and improvement programs. General Helper Qualifications: • Prior experience in a manufacturing, industrial, or heavy production environment preferred., • Ability to perform a wide range of job functions with minimal supervision in a fast-paced setting., • Demonstrated flexibility and willingness to work in various roles and departments as needed., • Ability to safely operate industrial equipment, including mobile and heavy machinery., • Strong attention to detail with the ability to identify and address product quality issues., • Good judgment and decision-making skills, particularly in situations involving safety or production quality., • Ability to perform physically demanding work, including lifting, carrying, bending, climbing, and working in confined spaces or at heights., • Willingness to work in varying environmental conditions (heat, cold, noise, dust, etc.) typical of a mill environment., • Basic understanding of workplace safety practices and commitment to following all safety policies and procedures., • Ability to follow verbal and written instructions and adhere to standard operating procedures., • Strong teamwork skills with the ability to support multiple departments and work collaboratively with others., • Reliability and dependability, including good attendance and the ability to respond to changing work assignments., • Willingness to participate in continuous improvement efforts, including safety and environmental programs. Qualifications Joining Wieland’s team gives you… • Benefits - Including Medical, Dental, Vision, Disability, Life & more!, • Retirement Savings - 401(k) employee contribution + pension plan., • Work/Life Balance - Paid Vacation & Holidays., • Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless!, • Wellness Programs – Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program., • Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland is an equal opportunity and affirmative action employer. We celebrate diversity and are committed to fostering an inclusive environment for all employees. Come join Wieland today and help us continue to build a global corporation we are all proud to belong to.

Job DescriptionDescription: Carrier Process Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment solutions. Please visit us at https://www.cpeg.com/ to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. CPEG Buffalo LLC is seeking a full time, on site Electrician. This role is responsible for various electrical installations as required to manufacture products to customer drawings, specifications, or other forms of instruction. This position will be located at our Tonawanda shop located at 2000 Military Road, Tonawanda NY 14150. Schedule: Monday - Thursday 6am - 4:30pm Job Duties: • Performs duties and responsibilities in compliance with CPEG ‘s Process Map for Production;, • Interprets and reads schematic wiring drawings, • Run Rigid conduit; bend and thread using hand and power tools;, • Pull and Terminate wire;, • Build Junction boxes to print;, • Basic mechanical skills;, • Safety and housekeepingRequirements:, • High School Diploma, or equivalent required;, • Vocational or Technical training in related area preferred;, • One year experience in Rigid Conduit / Cable Tray & Glands preferred., • 2-5 Years in an Industrial work environment preferred. Knowledge, Skills, and Abilities: • Maintain a customer-focused perspective in all activities initiated to ensure that customer needs are successfully met;, • Relies on instructions and pre-established guidelines to perform the functions of the job;, • Develop professional and process expertise to provide improved assistance to internal and external customers; basic problem solving skills;, • Able to understand electrical symbols;, • Able to cut and thread conduit to proper size;, • Able to identify the different fittings and their use;, • Able to assist in wire pulling;, • Able to make simple electrical connections;, • Able to calculate proper dimensions for conduit bending;, • Familiar with GreenLee one shot table top bender;, • Able to read and understand electrical schematics;, • Basic reading and comprehension skills;, • Able to understand and carry out detailed written or oral instructions;, • Basic Assembly Skills;, • Basic Mechanical Skills;, • Have excellent communication skills, both written and verbal;, • Able to understand proper handling of all paperwork required in department reporting;, • Basic math including, but not limited to, addition, subtraction, multiplication, division, fractions and decimals;, • Basic measuring devices and basic scales of measurement including but not limited to, tape measures, rulers, thermometers and machinist scales;, • Understands and able to utilize mathematical formulas required to perform job;, • Able to use a level and tape measures;, • Knowledge of general manufacturing safety rules; proper use and handling of job related safety equipment;, • Able to safely operate forklift and overhead crane;, • Able to obtain required material and fittings dictated by BOM;, • Able to determine special requirements (slope, expansion loops and designated walkways) from drawing;, • Demonstrates the safe operation of manual and power tools;, • Basic computer skills; Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them., • Cash Balance Pension Plan. We contribute to this retirement savings on your behalf—no employee contribution required. Combined with a guaranteed 4% rate of return, this means you receive a consistent and valuable retirement benefit every year. CPEG Buffalo LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to actual or perceived: race (including traits historically associated with race, such as hair texture and protective hairstyles), color, creed, religion (including wearing attire, clothing or facial hair in accordance with the tenets of religion), sex (including pregnancy, childbirth or related medical conditions and transgender status), gender identity or expression, reproductive health decisions, familial status, national origin, physical or mental disability (including gender dysphoria and being a certified medical marijuana patient), genetic information (including predisposing genetic characteristics), age (18 and over), veteran status, military status, sexual orientation, marital status, certain arrest or conviction records, domestic violence victim status and any other status protected by law. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job Description CDL A Drivers, Part Time – Buffalo, NY Wolverine Trucking Offers: • Ability to be home after every shift, • Available schedule: Weekends, • Weekly pay, • Steady work, year round, • $1,000.00 sign on bonus ($500.00 after successful completion of probationary period and $500.00 after 1 year of employment) At Wolverine we work for internal and external customers, so there is the potential to be constantly busy transporting bulk sand to a variety of locations. We offer competitive wages, a comprehensive group benefit program, and 401(K)-matching. We are currently searching for logistic professionals to complement our team in Buffalo, NY for part time, weekend work. Responsibilities: • Safely operate a tractor-trailer truck., • Haul various bulk sand material., • Properly track and document activity log., • Inspect truck before and after trip., • Report any issues or incidents to operations manager. Skills and Requirements: • Commercial driver's license (Class A) is mandatory., • Minimum one-year truck driving experience under CDL A license preferred., • Experience with sand box hauling is preferred., • Ability to drive tractor-trailer on multiple routes., • Must be able to perform routine inspection of the vehicle., • Acceptable drivers abstract., • Ability to handle physical workload., • Strong work ethic., • Communicate effectively., • Flexibility to work weekends. Must be able to pass a pre-employment background check, physical, and drug screen.

Job DescriptionDescription: JOB SUMMARY Driving responsibilities involve delivery/pick up, reporting, operations, service, safety and maintenance, and other duties as assigned by management. The truck driver will maintain a positive attitude that promotes teamwork within the company and a favorable image of the company. When performing warehouse duties under the Supervision of the Warehouse Manager, will perform material receiving; order processing; use of company ERP System; product packaging for shipment to ensure error-free packaging; efficient loading and unloading of trucks. Verify and keep records on incoming and outgoing inventory. This position is classified as a Safety Sensitive Position due to the work environment and equipment utilized by staff. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES Driver • Deliver/Pick-up, • Assist in loading cargo as necessary., • Conduct Pre-trip inspection and complete paperwork., • Inspect freight, paperwork, and vehicle for compliance with regulations., • Check fuel and oil level before leaving., • Ensure cargo is well secured and not damaged., • Deliver the cargo in the most efficient and safest manner possible., • Ensure accuracy of the invoice and order before unloading., • Unload and/or assist in unloading cargo at the respective customer locations., • Assist in loading cargo as necessary from customers., • Collect COD payments as required., • Reporting, • Report any discrepancies in vehicle, cargo, or paperwork to your supervisor prior to leaving., • Complete all DOT regulated paperwork as required., • Report any customer complaints or refusals to your supervisor., • Return all required documentation to the company daily to include but not limited to: signed delivery receipts, pick up slips, driver’s logs, pre-trip inspection sheets., • Service, • Greet customers promptly and courteously., • Assist customers with unloading and loading cargo as necessary., • Actively work to increase personal skills and product knowledge., • Maintain a neat appearance., • Safety and Maintenance, • Operate the vehicle safely., • Obey all traffic laws, including proper use of Electronic Log Device [ELD], • Follow FMCSA Clearinghouse Regulations, • Allow no riders except those approved by your supervisor. Warehouse • Unload incoming trucks and move products to proper staging areas using a forklift, pallet jack or crane., • Receive incoming materials and compare information on packing slip with purchase orders, invoices, or other documents to verify accuracy of shipment., • Prepare orders for shipment by retrieving inventory and packaging appropriately for damage free delivery., • Maintain a neat and clean work area by sweeping floors, disposing of cardboard, banding, or packing materials, and removing debris., • Perform related duties as requested to meet department and/or business objectives., • After training, use equipment to accurately measure materials, color code, catalog, log inventory, and put product away., • With training, may operate industrial cutting equipment to cut materials as requested and perform miscellaneous duties as assigned, • After training, when required, may operate a non-CDL F450 truck for delivery, to meet production needs., • Regular and reliable on-site attendance is a requirement of employment. Requirements: QUALIFICATION STANDARDS • Valid NYS Drivers' License in good standing with Non-CDL Medical Card, • Obtain and maintain a valid Non -DOT Medical Certification., • Valid Real ID or eligible identification proof may be mandatory based on customer requirements for specific delivery territories., • Registration on FMCSA Clearinghouse and knowledge of State/Federal transport regulations., • High School Diploma or High School Equivalent strongly preferred., • Competent driving skills with one year of driving experience preferred., • Knowledge of vehicles and all their parts., • Mathematical ability to sort, check, count, measure, and verify numbers and or product shipped or received., • Demonstrated computer skills in the use of the company ERP System as required., • Ability to operate material handling equipment after training., • Ability to read and write English., • Good communication skills., • Ability to prepare routine administrative paperwork and perform math calculations. SUPERVISORY RESPONSIBILITIES • This position does not have any supervisory responsibilities. ACCOUNTABILITIES • Contribute to the overall success of the company by performing all assigned duties in a professional, timely and accurate manner., • Follow all Company safety policies and procedures set forth in the Employee Handbook, Safety Policies, and any local/regional/state/national regulations. EQUIPMENT, MACHINES AND SOFTWARE USED: • Ability to operate industrial fork trucks/lifts, overhead crane, back saw, and computer to send/receive email messages, post information to a database, and perform basic email and/or data entry in ERP System., • Accurately read calipers and measuring instruments determine inventory amounts and customer requirements. With training ability to machinery (saw and/or lathe)., • You must wear appropriate personal protective equipment including safety shoes, gloves, and safety glasses when performing certain job duties. MENTAL AND VISUAL REQUIREMENTS • Moderate mental and visual attention required for performing manual work, machine operations, setups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation., • May be required to operate equipment in congested areas involving considerable variety of movement. PHYSICAL ACTIVITIES AND REQUIREMENTS • Ability with or without reasonable accommodation performs the physical requirements of the job which include but are not limited to walking, climb, stoop, kneel, crouch, bend, talk, hear, and perform repetitive motion of hands and/or wrists to finger, grasp, handle, feel, push, pull, reach., • Visual acuity to perform inspection of materials, reading of caliper and other measuring devices and operating motorized material handling equipment., • Ability to exert more than 20 pounds of force constantly, and/or more than 50 pounds of force frequently, and/or 100 pounds of force occasionally to move objects. ENVIRONMENTAL CONDITIONS • Work involves minimal exposure to unusual elements, such as temperature changes, outdoor exposure to weather conditions, fumes, odors, gases, mists, and/or smoke, oils and/or lubricating fluids. (SDS sheets on file and available for review)., • Work environment involves exposure to physical risks, such as operating dangerous equipment and proximity to moving mechanical parts. COMPENSATION • The hourly range is $19.00/hour wage up to $27.50/hour, plus discretionary incentive. EMPLOYER'S DISCLAIMER • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job Description Sign-on bonus eligible position and referral bonuses after you are hired on! Position Summary Be a part of the "Modern Way" and join the team of Commercial Drivers that serve our Western NY customers. Be respected, Be Valued, be Modern! Modern will be celebrating our 60th year in 2024, we are a local family-owned company born and raised in Western NY! We are looking for qualified drivers that will create the "Modern Experience" for our customers and represent the Modern Brand. If you are looking for career growth within a recession-resistant industry, come be an essential driver for Modern Disposal! Essential Responsibilities • Perform complete pre- and post-operation inspection of the vehicle in accordance with Company policy to ensure tire pressure, fluid levels, safety equipment, gauges, and controls are in proper working order. Report any safety issues on standard reports., • Safely operate his or her heavy truck along his or her designated route and to the disposal site; read route sheet, follow map and service each customer as identified on the route sheet or as assigned by the dispatcher and/or supervisor., • Operate manual and/or automatic controls in accordance with Company safety policies and procedures to lift and load refuse, operate compactor and dispose of collected material at the designated facility., • Courteously interact with all customers, dispatchers and others on a daily basis to ensure all customer routes are serviced in a timely and professional manner., • Identify unsatisfactory waste containers and tag containers in accordance with applicable departmental procedures., • Continuously monitor waste for evidence of unacceptable waste. Clean area around an accidental waste spill, ensuring adherence to all applicable safety standards and policies. • Continuously monitor the condition of the vehicle to ensure it is operationally ready at all times to minimize down time; clean waste from the packer blade and truck body (where appropriate) on each disposal trip., • Complete required route/productivity sheets, VCRs and other reports, as required. Maintain adherence to required productivity standards for the department to ensure all customers are serviced in a timely and efficient manner. • Follow all required safety policies and procedures., • Perform other job-related duties as assigned. The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company. Education and Experience • Clean Class A or B Commercial Driver's license and DOT physical card, • Two years of prior driving commercial trucks preferred., • Able to read and write legibly, • Able to comply with company policy on controlled substances and alcohol, • Ability to work independently with minimal supervision, • Strong customer services skills to meet and exceed customer expectations; acts in a professional, courteous and cooperative manner toward customers and co-workers; works with a sense of honesty and trustworthiness., • Excellent time management skills to ensure assigned responsibilities are completed in an efficient and safe manner., • Good follow through ability; adheres to work schedule and follows through on challenges as they arise., • Ability to adhere to Company policies and rules set forth; promotes the Company’s safety standards; does not take inappropriate risks., • Maintains a feeling of pride in work; strives to achieve all goals. Benefits at Modern: • Medical, Dental and Vision Coverage, • Retirement Savings with Employer Match, • Health Savings Accounts, • Voluntary Insurance Products, • Employee Assistance Program, • Paid Time Off, • Paid Holidays, • Direct Deposit/Electronic Paystubs, • Discount Memberships, • Company-Sponsored Events Modern Corporation is an Equal Opportunity Employer and is committed to providing all applicants and employees the right to equal employment opportunities with regards to all aspects of the employment relationship. The Company will not engage in discriminatory practices against any applicant for employment or employee of the Company because of race, color, religion, marital status, familial status, military or veteran status, disability (including pregnancy-related conditions), creed, sex, sexual orientation, gender, gender identity or expression, transgender status, age, national origin, ancestry, domestic violence victim status, genetic predisposition or carrier status, genetic information, known relationship or association with any member of a protected class, or any other legally protected class or status.

Job DescriptionDescription: 2,000 Sign-On Bonus Hiring Immediately for Roofing Subcontractors - Are you leading a skilled roofing crew looking for consistent, year-round work? Erie Home, a top industry leader, is seeking reliable roofing subcontractors. We’ve been ranked among the Top 10 on the Qualified Remodeler Top 500 list for consecutive years. Why Work with Erie Home? • $2,000 Sign-On Bonus, • Earning Potential: Up to $100,000 per year, • Reliable Work: Full-time, year-round projects, • Job Support: Detailed job packets provided, • Weekly Pay: Direct deposits every week, • No Material Costs or Dump Fees: We cover it allRequirements:, • General Liability Insurance, • Workman's Compensation Insurance, • EIN Letter, • Current Contractor’s License (if required by your state), • Reliable vehicle, roofing tools, and equipment required for job completion. Let's elevate your roofing business together. Apply now! Erie Home is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, political affiliation, sexual orientation, marital status, disability, age, military service, or any other protected class. If you need a reasonable accommodation due to a disability, please contact Human Resources with your request and contact information.

Job DescriptionJob Title: Foreperson with CDL This position ensures the productivity of daily operations, working closely with management to determine recruiting/hiring needs, deadlines, and safety protocols to enforce among the crew. The Foreperson is responsible for troubleshooting routine job site issues and engages all employees/contractors on required training, managing, and mentoring. Job Type: Full-Time +, Non-Exempt Pay: 33.77 - $36.00 per hour. Benefits: • Available Benefit options vary based on tenure, position, and work location. Essential Functions & Responsibilities:, • Plans, coordinates, and assigns daily work for the crew after receiving/interpreting orders from a General Foreperson/Line Clearance Supervisor., • Conducts field training/retraining, instructing crew on new or revised job units., • Enforces safe work practices, as experience, judgment, company policy, and OSHA specifies and conducts safety training in accordance with company policies and procedures., • Discusses with property owner/customer(s) issues such as obtaining access, power interruption, work to be done, and responsibility for apparent damage to property; refers controversial cases to the General Foreperson., • Obtains oral or written permission from property owners to perform required work., • Promotes and maintains good customer and public relations through the effective completion of assigned work and the appropriate behavior of employees on the crew., • May be delegated the authority to investigate incident reports, damage claims, etc., and to settle minor damage claims., • Maintains accurate records, timesheets, and reports related to the performance of the crew operation., • Controls crew costs, including effective use of people-power, work methods, operation of equipment, etc., • Furnishes General Foreperson and utility representative with reports of orders completed, units of work completed, crew time, minor damage repairs and distribution, etc., • Periodically furnishes reports on incidents, truck breakdowns, private property damage, new employee follow–up, etc., • Cooperates with customers, police, and fire departments when blocking streets or driveways., • Sets up barriers, warning signs, flags, markers, etc., to protect employees and safeguard the public from hazards. In emergency situations, determines action to be taken to eliminate hazards to life and property., • Inspects and makes or provides for necessary repairs to tools, trucks, and other equipment., • Maintains good housekeeping on the truck and at work location., • Responsible for DOT maintenance and inspection requirements on all required vehicles., • Keeps informed regarding new equipment, specifications, standard practices, operating procedures, and customer and company employee relations policies and practices, including EEO and AA policies. Requests repair or replacement, when necessary.Minimum Qualifications:, • Requires the understanding of drawings and symbols representing lines, voltages, line equipment, etc., • Must have excellent communication and leadership skills., • Must have organization skills and be able to multi-task., • Must be capable of adjusting to field requirements and taking independent action without close supervision., • Must be able to safely drive an approved company vehicle., • Must be able to work with hands above head for extended periods of time., • Due to the capacity of existing equipment, the weight of the employee should not exceed approximately 300 pounds., • Must have no fear of heights.Education & Experience:, • Must be 18 years or older, • High School Diploma or GED equivalent preferred.Pre-Screen:, • Upon offer, employees may be required to subject and pass a pre-employment drug screen, background, and/or MVR check.License & Certifications:, • A valid CDL Driver's license is required.Physical Requirements:, • RARE (less than 10%): crawling, climbing, gripping, lifting up to 50 lbs., • OCCASIONAL (up to 33%): standing, stooping, kneeling, squatting, body-twisting, sense of touch, manual dexterity, lifting over 10 lbs. to 50 lbs., reaching, range-of-motion, lifting, carrying, pushing, pulling, climbing ladders, climbing stairs, balancing., • FREQUENT (up to 66%): walking, sitting, climbing on/off truck, reading, lifting up to 10 lbs., • CONTINUOUS (up to 100%): speaking clearly, seeing distant, seeing, hearing-speech-range, depth-perception, color vision.Safety: Due to the inherently dangerous nature of the industry and requirements to work with or around hazardous equipment, employees must have sufficient eyesight to judge distance/coordination of equipment and tools, be able to maintain attention and concentration for extended periods of time, be able to withstand exposure to all kinds of weather while completing work assignments, be able to wear personal protective equipment as necessary, be able to enter and exit a vehicle numerous times a day, have the endurance necessary to traverse various terrain, be capable of performing job duties throughout a standard 8- or 10-hour day, be able to communicate with others, read, write, and comprehend written/verbal job instructions and information, and communicate and handle conflict professionally. • Works in proximity to energized power lines., • Works around excessive noise from machines, chainsaws, wood chippers, and other equipment with hearing protection., • Works in all temperatures and weather and will be exposed to nature, i.e., irritating plants and biting or stinging insects, dust, etc., • Works at varying heights above ground and on unlevel terrain., • Must be able to walk, climb, and work from ladders, or at various heights, on uneven and slippery surfaces, performing mentally/physically demanding work under unfavorable weather conditions while handling equipment or material. Individuals with a disability who desire a reasonable accommodation can contact the ADA Coordinator by calling 1-833-222-3066. We partner with the Department of Homeland Security/U.S. Customs and Immigration Service to e-Verify all newly hired employees. An Equal Opportunity Employer.

Job DescriptionJob Title: Warehouse Associate Location: Tonawanda, NY Hire Type: Direct Hire Pay Range: $18.00 - $19.00/hour Work Type: Full-time Work Model: Onsite Work Schedule: Monday – Friday, 8:30am – 5pm Recruiter Contact: Blanca Vega, bvega@imaginestaffing.net Nature & Scope:Positional Overview The Imagine Group is recruiting for a Warehouse Associate on behalf of our client, a leading manufacturer and distributor of engineered fastening solutions. This company serves a wide range of industries including automotive, aerospace, and industrial manufacturing. In this role, you will be responsible for receiving, storing and organizing inventory. In addition, you will assist with picking and packing orders for shipment, performing regular inventory counts and ensuring all products are handled and shipped according to company quality and safety guidelines. As part of our team, you will enjoy a comprehensive benefits package, including: • Medical & Employer Paid: Dental & Vision starting May 1, 2025, • Paid Parental Leave, • 401K and Employer Match, • Paid time off and holidays, • Tuition Reimbursement, • Paid on-the-job Training, • Performance Incentive Bonuses, • Community Volunteering, • Employee Centric Culture Role & Responsibility:Tasks That Will Lead To Your Success, • Receive products and other goods. Use ERP system, JD Edwards, as required for receiving direct finished goods., • Pick orders using our ERP system, JD Edwards, utilizing a Microsoft tablet, • Verify quantity of products received by reading shipping information and box quantities., • Identify and stock products accurately and timely into warehouse bin locations utilizing scanning equipment., • Re-package products as needed by counting items and ensuring the accurate quantity is in each box., • Maintain and process order using tool assembly, bagging machine, rework, and quality sorting., • Prepare and ship product per customer requirements and shipping orders (including bar codes), or secondary process requirements., • Maintain equipment checklists and minimal equipment upkeep. Including scales, forklifts, etc., • Complete required daily and monthly maintenance checklist. Report issues to manager(s)., • Maintain clean warehouse area- following policies and procedures for housekeeping and safety., • Verify returned material authorization (RMA) quantities, part numbers, customer names etc. and close RMA in Syspro., • Become and maintain Penn Engineering approved Forklift certification within 3 months of employment., • Other duties as assigned Skills & ExperienceQualifications That Will Help You Thrive, • High school diploma or equivalent, • 1+ Years of warehouse experience preferred, • Ability to read and communicate both verbally and written in English, • Skill in adding, subtracting, multiplying and dividing numbers, • Ability to use a computer for data entry, data retrieval and updating orders appropriately, • Ability to utilize barcode scanning technology, • Experience with JD Edwards ERP System or another ERP System preferred, • Frequent lifting and carrying of items, often ranging from 10 to 50 pounds (sometimes heavier)., • Frequent lifting as a team for items over 50 pounds, • Standing and walking for extended periods, often 8–12 hours per shift., • Bending, stooping, and crouching to pick up or move items., • Reaching overhead and at various angles to access shelves or storage areas., • Pushing and pulling carts, pallet jacks, or other equipment., • Climbing ladders or stairs to reach high storage areas., • Operating machinery such as forklifts, pallet jacks, or conveyor belts (may require certification)., • Repetitive motions such as scanning, packing, or sorting items., • Working in varying temperatures, including cold storage or hot environments., • Manual dexterity for handling small items, labeling, or packaging.

Job Description Warehouse Associates are a skilled group of individuals that masterfully help to organize the warehouse operations of receiving and moving materials and products within the warehouse. At Kamco, we believe in doing business with integrity and being the Company of Choice for both our customers and our team. Come build your career with an exciting and growing organization within the building products industry! Essential Functions/Qualifications/Education: • Provide service to customers entering the warehouse., • Receive, organize, and move incoming materials and load outgoing materials., • Allocate and move material to its correct place and ensure an orderly warehouse at all times., • Maintain packing specifications, and make suitable skids/pallets, etc., • Operate forklift and other company vehicles and equipment as trained and instructed., • Attend and participate in all required company training programs., • Perform minor building maintenance when necessary., • Participate in weekly, monthly and/or annual physical inventories., • Maintain the appearance of the warehouse in a safe and orderly manner., • Conform to all company policies and procedures, and OSHA standards., • Maintain a high level of customer focus in producing quality products and services., • Maintain a full understanding of all products by identification, weight, and size., • Must be able to operate a forklift., • Ability to lift up to 100lbs., • Must be able to work 40 to 50 hours per week.., • Verify truck loads., • Able to work outdoors - varying shifts., • Maintain a basic knowledge of trucks, forklifts, and other equipment to determine necessary repairs., • High school diploma, general education degree (GED), or equivalent work experience and/or training., • Building supply warehouse experience strongly preferred., • Support our company values in the stated areas of Safety, Customer Focus, Teamwork, Integrity and being a Company of Choice for both employees and customers., • Other duties may be assigned. After receipt of conditional offer of employment, eligible candidates must be able to pass drug screen/physical/background check. Kamco Benefits: • A principled approach to work, including honesty and integrity., • A friendly and supportive work environment., • Competitive pay and incentives., • Excellent benefits including: Medical, Dental and Vision plans, 401(k). Kamco Supply promotes an equal employment opportunity workplace with respect to all categories protected under applicable State and Federal law.

Job Description We are looking for someone to join our team as a Warehouse Associate. In this role, you will ensure a safe working environment, manage outgoing and incoming shipments, and maintain accurate cycle counts and material handling. Our ideal candidate has some knowledge of inventory management, shipping, and handling and experience in customer service and purchasing. Customers drive our work, and our employees are empowered and committed to delivering best-in-class service. In addition, you will be well compensated and eligible for benefits as an employee. Responsibilities: • Receive shipments, and verify correct quantities to shipping documents, • Accurately record shipment information in the company system, • Report shipment discrepancies and issues to the Customer Service Manager, • Accurately fill orders using shelf inventory and safely package materials for shipping, • Utilize third-party logistics software to generate shipments, • Safely operate a forklift, pallet jack, and hand carts to move materials, • Appropriately store materials in the correct warehouse locations, • Perform inventory counts, identify, and record discrepancies, • Work with internal departments to investigate and resolve inventory discrepancies Requirements • High school diploma or equivalent preferred, • Valid driver’s license, • 1-3 years of experience in warehousing, shipping, or receiving, • Understanding inventory management is desirable, • Able to work with little to no supervision to complete assigned tasks, • Good written and oral communication skills and excellent organizational skills, • Experience using Microsoft Excel and Word, • Ability to sit or stand for long periods, • Comply with all safety guidelines to ensure a safe work environment, • Undergo a background check in accordance with local laws and regulations and successfully pass a drug screening Benefits Medical, Dental, Vision, and PTO

Job Description CDL A Drivers – Buffalo, NY Wolverine Trucking Offers: • Ability to be home after every shift, • Available schedule: 6:00 p.m. - 6:00 a.m. (night shift), • Weekly pay, • Steady work, year round, • $3,000.00 sign on bonus ($1,500.00 after successful completion of probationary period and $1,500.00 after 1 year of employment) At Wolverine we work for internal and external customers, so there is the potential to be constantly busy transporting bulk sand to a variety of locations. We offer competitive wages, a comprehensive group benefit program, and 401(K)-matching. We are currently searching for logistic professionals to complement our team in Buffalo, NY. Responsibilities: • Safely operate a tractor-trailer truck., • Haul various bulk sand material., • Properly track and document activity log., • Inspect truck before and after trip., • Report any issues or incidents to operations manager. Skills and Requirements: • Commercial driver's license (Class A) is mandatory., • Minimum one-year truck driving experience under CDL A license preferred., • Experience with sand box hauling is preferred., • Ability to drive tractor-trailer on multiple routes., • Must be able to perform routine inspection of the vehicle., • Acceptable drivers abstract., • Ability to handle physical workload., • Strong work ethic., • Communicate effectively., • Flexibility to work weekends an asset. Must be able to pass a pre-employment background check, physical, and drug screen. #ZR