Trabajos minor en Syracuse, New YorkCrear alertas

We're looking for Emergency Room RNs for an immediate travel nurse opening in Syracuse, NY. The right RN should have 1-2 years recent acute care experience. Read below for more requirements. As an ER Travel Nurse, you will work with a diverse team of caregivers to appropriately evaluate, triage and implement care using correct procedures and physician instructions. RNs should have experience and skill caring for patients in a fast-paced, urgent and emergency environment. Emergency Room RNs will perform minor medical operations, advise patients and family on illnesses or injuries, and plan long-term care needs. Other responsibilities as an ER Travel Nurse include documenting medical history, checking for any allergies patients might have, obtaining patient vital signs, and monitoring patients' emotional and physical well-being. As an ER Travel Nurse, you should be prepared to perform the following tasks: • Provide basic bedside care., • Clean and bandage wounds., • Provide IV therapy., • Maintain supplies and medical equipment., • Report suspected abuse to appropriate agencies. ER Travel Nurses should be able to stand and walk for long periods of time, as well as bend, lean and stoop without difficulty. RNs should be able to easily lift 20 pounds. Moving or lifting of patients may require lifting of up to 50 pounds at times. Because of the fast-paced environment, Emergency Room RNs must possess good skills for coping with stress and be able to relate to people of all ages and backgrounds. Requirements*: ACLS, BLS, PALS, NIH, 3 Years • Additional certifications may be required before beginning an assignment.

Seeking a skilled and compassionate Certified Registered Nurse Anesthetist (CRNA) to join our dynamic anesthesia team. The CRNA will be responsible for administering anesthesia, monitoring patients’ vital signs, and overseeing patient recovery from anesthesia. The ideal candidate will demonstrate a high degree of autonomy, clinical expertise, and a commitment to providing the highest quality of care. Shifts vary 8, 10, and 12 hour. Requirements: • Education: Master’s or Doctoral degree in Nurse Anesthesia from an accredited program., • Certification: Current certification as a Certified Registered Nurse Anesthetist (CRNA) by the National Board of Certification and Recertification for Nurse Anesthetists (NBCRNA)., • Licensure: Active RN and APRN licensure in the state of New York., • Required Experience: Experience in anesthesia care across a variety of surgical and procedural settings. Compensation: • Base Salary: 256,000- 285,000, • 100 K Starting Bonus, • 15 K Retention Bonus, • Relocation Assistance available, • Excellent benefits; including health/vision/dental insurances, • Paid malpractice, including post-SPHP employment tail coverage, • CME time & expense allowance, • Paid time away from the practice, • Retirement savings program with employer matching program Community Info: Enjoy easy access to cultural, recreational, and outdoor activities, including the Finger Lakes wineries, New York City, and Toronto. Syracuse is known for its parks, recreational areas, and strong community atmosphere, making it an ideal place to live and work. • Enjoy safe, family oriented neighborhoods with low cost living, • Reputable Colleges nearby (Syracuse University, Cornell & Lemoyne College), • Excellent private, public and parochial schools amongst the best in the country, • Great opportunity to see nationally ranked college sporting events as well as minor-league triple A baseball, • Skiing, Snow Boarding, Snowmobiling, Mountain Biking, Fishing and many local beaches, • One of the nation’s largest malls, Destiny USA, • Home of wine country, with many local wineries and breweries, • Just a few hours to Canada, Adirondacks, or to New York City APPLY NOW or TEXT Job #ELC231938 and email address to 636 - 628 - 2412. Search all of our provider opportunities here: brittmedical DOT com

Job Description Warehouse Associates are a skilled group of individuals that masterfully help to organize the warehouse operations of receiving and moving materials and products within the warehouse. At Kamco, we believe in doing business with integrity and being the Company of Choice for both our customers and our team. Come build your career with an exciting and growing organization within the building products industry! Essential Functions/Qualifications/Education: • Provide service to customers entering the warehouse., • Receive, organize, and move incoming materials and load outgoing materials., • Allocate and move material to its correct place and ensure an orderly warehouse at all times., • Maintain packing specifications, and make suitable skids/pallets, etc., • Operate forklift and other company vehicles and equipment as trained and instructed., • Attend and participate in all required company training programs., • Perform minor building maintenance when necessary., • Participate in weekly, monthly and/or annual physical inventories., • Maintain the appearance of the warehouse in a safe and orderly manner., • Conform to all company policies and procedures, and OSHA standards., • Maintain a high level of customer focus in producing quality products and services., • Maintain a full understanding of all products by identification, weight, and size., • Must be able to operate a forklift., • Ability to lift up to 100lbs., • Must be able to work 40 to 50 hours per week.., • Verify truck loads., • Able to work outdoors - varying shifts., • Maintain a basic knowledge of trucks, forklifts, and other equipment to determine necessary repairs., • High school diploma, general education degree (GED), or equivalent work experience and/or training., • Building supply warehouse experience strongly preferred., • Support our company values in the stated areas of Safety, Customer Focus, Teamwork, Integrity and being a Company of Choice for both employees and customers., • Other duties may be assigned. After receipt of conditional offer of employment, eligible candidates must be able to pass drug screen/physical/background check. Kamco Benefits: • A principled approach to work, including honesty and integrity., • A friendly and supportive work environment., • Competitive pay and incentives., • Excellent benefits including: Medical, Dental and Vision plans, 401(k). Kamco Supply promotes an equal employment opportunity workplace with respect to all categories protected under applicable State and Federal law.

Job Description Pay Range: $18-$20 hourly About Us ADESA, a Carvana owned company, currently operating over 50 locations throughout the US. Our Auto Auctions, some up to 200 acres, provide a wide array of vehicle services including repair & reconditioning, auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Get a sneak peek into life at ADESA! Role and Team • Provide prompt, efficient and courteous customer service, • Greet and assist walk-in customers and answer the phone, • Assist with processing vehicle titles, • Assist customers with dealer registration, compiling documents, and record retention, • Collect payments (check and floorplans), • Assist with vehicle redemptions including scheduling and processing documents, • Assist with customer bid badges, • Vehicle release form management, • Invoicing, • Strong organizational and administrative skills, • Customer service, • Data entry, • Strong team player, • Ability to work in a fast paced environment, • High School diploma or GED required, • Effective customer service skills including customer resolution skills, • Excellent verbal and written communication skills, • 1 to 2 years office experience preferred, • Proven ability to multitask while maintaining attention to detail, • Confidentiality and integrity while handling sensitive information, • Proficiency with computer systems data entry and software applications; Google Suite and CRM is a plus Competitive Pay | Quality Benefits | Holiday and Paid Time Off | Education and Equipment Reimbursement Programs | Matching 401(k) | Career Path Opportunities | And More! Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Light to Administrative Physical Work. This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. To be able to do your job at ADESA, you must be able to read, write, speak, and understand English. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Pay Range: $18-$20 hourly About Us ADESA, a Carvana owned company, currently operating over 50 locations throughout the US. Our Auto Auctions, some up to 200 acres, provide a wide array of vehicle services including repair & reconditioning, auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Get a sneak peek into life at ADESA! Role and Team • Provide prompt, efficient and courteous customer service, • Greet and assist walk-in customers and answer the phone, • Assist with processing vehicle titles, • Assist customers with dealer registration, compiling documents, and record retention, • Collect payments (check and floorplans), • Assist with vehicle redemptions including scheduling and processing documents, • Assist with customer bid badges, • Vehicle release form management, • Invoicing, • Strong organizational and administrative skills, • Customer service, • Data entry, • Strong team player, • Ability to work in a fast paced environment, • High School diploma or GED required, • Effective customer service skills including customer resolution skills, • Excellent verbal and written communication skills, • 1 to 2 years office experience preferred, • Proven ability to multitask while maintaining attention to detail, • Confidentiality and integrity while handling sensitive information, • Proficiency with computer systems data entry and software applications; Google Suite and CRM is a plus Competitive Pay | Quality Benefits | Holiday and Paid Time Off | Education and Equipment Reimbursement Programs | Matching 401(k) | Career Path Opportunities | And More! Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Light to Administrative Physical Work. This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. To be able to do your job at ADESA, you must be able to read, write, speak, and understand English. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionMetal Pattern Marker - Master Cam/CNC Programming Exp.(1st shift)Why Join UsThe salary shouldn't scare you away. You can earn more! Your craftsmanship will shape the parts that power industries. As a Pattern Maker, you will work on complex, high-precision projects that truly showcase your expertise. This is a 1st shift role with core hours of 6:00 AM to 2:30 PM, offering relocation assistance for qualified candidates. This is more than just a job – it’s a chance to take pride in building intricate patterns and molds that keep the world running. What You’ll Do • Create and hand-finish patterns, core boxes, and permanent molds of varying complexity, • Plan layouts, alignments, and fasten split sections to make plates or cope and drag plates with precise dimensions, • Operate a variety of machine tools, including CNC machines, while programming software like SolidWorks for machining tasks, • Perform intricate hand and bench operations such as fitting, polishing, and scraping to achieve exact tolerances, • Review prints for errors, develop interim dimensions, and make templates as needed, • Engage in Total Productive Maintenance (TPM) activities, including cleaning, inspection, lubrication, and minor repairsWhat You Bring, • High school diploma or GED, • At least four years of journeyman-level patternmaker experience or a journeyman license This is your opportunity to bring precision, creativity, and expertise to a role where every detail matters. Relocation assistance is available to help you make Syracuse, NY, your new home.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • Working largely independently, performs routine construction inspection services under the supervision of a Chief Inspector or Resident Engineer. May be responsible for review and assignment of work for Inspector(s)., • Duties include taking and documenting detailed measurements for payment, supervising material testing, notifying supervisor of issues and potential deviations from plans and specifications, and working with the contractor to resolve minor issues without guidance., • This position requires full knowledge of company standards, plans, and New York State DOT specifications. Qualified candidates will demonstrate familiarity and competence with various common job site conditions, will be able to clearly communicate project requirements to a contractor, and have the ability to resolve day-to-day disputes with a contractor, as well as have the experience required to know when to elevate an issue to their supervisor, all while maintaining detailed records of work and measurements and documentation for payment., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 5 years related experience, or similar position with experience in the construction field and transportation projects., • NICET Level III certification or successful completion of Fundamentals of Engineering exam required. Estimated Compensation Range: $79,040- 95,680.00/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Our current priority needs is on 3rd shift (10PM-6AM). $3.50/hr shift differential for 3rd shift! However, if you are interested in joining the team, please indicate your preferred shift, as opportunities are likely to open in the future! Standard shift hours: • 6:00 AM - 2:00 PM | Monday - Friday, • 2:00 PM - 10:00 PM | Monday - Friday Hourly Rate: +$18.00/hour, based on experience and qualifications What You’ll Be Doing • Operate, set up, optimize, and troubleshoot label manufacturing equipment, • Monitor product quality and ensure compliance with specifications, • Prepare and apply adhesives, inks, releases, and other materials, • Complete minor repairs and perform preventative maintenance, • Ensure correct raw materials are used during production, • Log production data accurately using computer systems and logs, • Maintain a clean, organized workspace in line with 6S standards, • Support material handling and packing operations, • Communicate and collaborate with cross-functional departments, • Participate in safety training and proactive hazard identification, • Contribute to training efforts and help develop SOPs, work instructions, and other documentation, • 2+ years of experience in printing or manufacturing preferred, • Strong mechanical aptitude and troubleshooting skills, • Proficiency with measuring tools like calipers, rulers, and gauges, • Familiarity with working around moving machinery and safety protocols, • Excellent teamwork, communication, and decision-making skills, • Ability to lift up to 50 lbs and navigate equipment at various heights, • Comfortable working in a standing position for extended periods, • Basic computer skills and the ability to learn new software, • High School diploma or GED preferred; a two-year technical degree is a plus, • Other Things We Think You Should Know, • This is a full-time, hands-on production role, • You’ll be part of a team that values safety, precision, and continuous improvement, • Opportunities for cross-training and career advancement are available, • What We Can Offer You, • Competitive hourly pay based on experience, • A positive and inclusive work environment, • Training and development opportunities The Fine Print At Iconex, we believe that diversity drives innovation and growth. We are proud to be an Equal Opportunity Employer and are committed to a workplace that celebrates and supports individuality. Every employee has a responsibility to uphold our inclusive values and treat all colleagues with respect and fairness. M2SS #Iconex

Job DescriptionCompany Description About Avery Dennison Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide — including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive — we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at . At Avery Dennison, some of the great benefits we provide are: * Health & wellness benefits starting on day 1 of employment * Paid parental leave * 401K eligibility * Tuition reimbursement * Employee Assistance Program eligibility / Health Advocate * Paid vacation and paid holidays Job Description We are currently seeking an Environmental, Health & Safety (EHS) Manager to join our apparel manufacturing plant in Liverpool, NY. This is a key role where you will develop, implement, and maintain the facility's EHS programs and create site-specific procedures. Your main goal will be to ensure we're fully compliant with all regulatory requirements and company initiatives. In this role, you will report directly to the Operations Manager, with a dotted line reporting relationship to the EHS Regional Manager. Responsibilities Environment, Health and Safety * Owning, creating and driving a proactive culture of safety, across all functions that is adaptable to the challenges of a large, growing manufacturing organization. * Lead in a manner consistent with Avery Dennison Values and Code of Conduct, living our culture through every day interactions and communications. * Organizing and controlling the EHS functions of the site in a collaborative manner to ensure that best in class accident prevention programs are created and maintained. * Implementing environmental, health and safety education and training to support regulatory and business requirements. * Investigating all releases, injuries and near-misses. * Managing Job Safety Analysis and PPE compliance program. * Maintaining the facility's compliance records for permits. Reviewing applicable regulation changes that impact permits and/or compliance. * Managing the safety program to assure compliance with corporate standards * Ensure our facility and that of our outsource partners is compliant to our customer audit regulations. * Identifying and evaluating hazardous conditions and practices and developing hazard control practices and programs. * Actively manage a contractor safety program * Coordinate periodic industrial hygiene monitoring of noise, air quality and other IH levels. * Reviewing plant incident statistics and making recommendations for correction of problem areas. * Conducting periodic risk assessments of plant machinery, equipment, and working conditions to ensure conformance to appropriate safety and sanitary standards and regulations. * Provide advice, assist, and audit the front line leadership to ensure that effective EHS is implemented and working * Maintain working relationships with Regulatory Agencies and chair or co- chair and lead the Safety Committees. * Assist with maintaining the Site Preparedness and Emergency Plans & Procedures. * Review Federal, State and local regulation changes that impact permits and permit compliance. * Coordinates and resolves regulatory issues with customers to meet business requirements and regulatory compliance. * Identifies and evaluates hazardous conditions and practices and develop hazard control practices and programs. Maintain MSDS system. * Reviews proposed CERs and approve them from a EHS perspective. Works closely with Engineering and Maintenance departments ensuring EHS compliance of projects and equipment. Reporting & Documentation * Requirements include integration of environmental, health and safety management systems with engineering and program documentation and schedules to maintain regulatory compliance and safe operating conditions. * Reduce liability within a facility and ensure all safety and environmental recommendations are completed and documented. * Compile process safety information for each covered process and keep readily accessible to process employees and management as well as updated on an annual basis. * Use a structured processes score card to measure and communicate Safety/Environmental performance with both leading results and indicators. * Track and regularly report the status of regulatory compliance and improvement initiatives. * Maintain OSHA 300 log, form 101, and all other governmental and corporate database records. Training, Resource & Counsel * Serve as a resource to the site manager in regards to EH&S matters and act as daily point of contact for all EH&S issues. Assists line and staff management in understanding OSHA/EPA regulations and standards, including guidance on handling OSHA/EPA compliance, inspections, and citations. * Organize and control the EH&S functions of the site(s) to ensure that an effective accident prevention program is maintained, that appropriate measures area taken to comply to Corporate, OSHA/EPA and related safety and environmental policies agencies and directives. Ensure that the company stays in compliance with company & client policies and procedures as well as federal and state laws. * Provides advice and counsel to product and process engineers and leads to incorporate environmental health and safety principles and concepts to prevent workplace, operational hazards and environmental impacts. * Implements environmental, health and safety education and training to support regulatory and business requirements. * Function as the contractor-plant representative to assure compliance of all PSM-related requirements from contractors. * Act as a resource and mentor to facility safety teams. Investigate all releases, injuries and near-misses. * The position may also be responsible for treating minor injuries, managing workmen's comp. cases, EHS training, recordkeeping, performing accident investigations, etc. Compliance & Safety Programs * Manage Job Safety Analysis program and OSHA PPE compliance program. * Maintain each facility's compliance records for permits. Review Federal, State and local regulation changes that impact permits and permit compliance. * Coordinates and resolves regulatory issues with customers to meet business requirements and regulatory compliance. * Manage the process safety program to assure compliance with all 14 elements of PSM. * Identifies and evaluates hazardous conditions and practices and develop hazard control practices and programs. Maintain MSDS system. * Reviews proposed CERs and approve them from a safety/environmental perspective. Works closely with Engineering and Maintenance departments ensuring safety/environmental compliance of projects and equipment. * Manage industrial hygiene program. Maintain and calibrate industrial hygiene testing equipment. Coordinate and conduct periodic industrial hygiene monitoring of noise, air quality and other IH levels. * Investigates compliance issues in conjunction with line and staff personnel. Notify top management of pertinent details. Guides and assists plant personnel at locations with critical environmental, safety and health issues. * Reviews plant incident statistics and makes recommendations for correction of problem areas. * Conducts periodic inspections of plant machinery, equipment, and working conditions to ensure conformance to appropriate safety and sanitary standards and regulations. * Assure that all modifications to existing PSM covered processes must go through a pre-safety start-up review, management of change, and a process hazard analysis. Qualifications Requirements * Bachelor's of Science degree required, Occupational Health and Safety, Chemical, Mechanical, Environmental Engineering/ Science or related field preferred. * 5+ years of EHS experience with progressive work assignments in a manufacturing environment. * Experience working in a facility that employs the OSHA Process Safety Management Standard required. * Advanced professional EHS certification (CSP, CIH, CHMM, QEP, CEA, REM etc.) desired. * Detailed knowledge of regulatory requirements and EHS policies, procedures and programs. * Experience in life safety codes: EHS rules, HAZOP, training, principles of occupational safety and health, and Process Safety Management. * Demonstrated success in leading efficient and effective compliance programs. * Strong interest and drive to identify/build and meet customer needs. * Being responsible for a number of key tasks, a high degree of accuracy, good time-management and priority setting skills are important. * An energetic, dedicated and enthusiastic work approach combined with good self management (without constant direct supervision) to meet deadlines. * Strong communication skills with a good command of the English language is required for this role. * Excellent teamwork, leadership, relationship building, mentoring, training and project management experience and skills. Additional Information Compensation Details The salary range for this position is $99,000- $105,000/year. The hiring base salary range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate’s relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Experienced Avery Dennison employees who are interested in this position and have questions regarding how the hiring range listed above may apply to them should contact their HR representative. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. AVERY DENNISON IS EVERYWHERE YOU LOOK: We not only embrace change… we drive it. We work hard, push hard, and take brave risks. Our culture is innovative and collaborative - where bold ideas turn into action. We grow strong talent through stretch opportunities only restricted by your interests. We are committed to workplace diversity, both for employees and for the business. We are a force for good, embedded in industries and communities worldwide. We are challenging ourselves and others to reach higher and think bigger to improve the quality of all life. Avery Dennison is a great place to work for everyone. We offer: • Workplace Flexibility, • Structured learning and development, • Mentoring program Equal Employment Opportunity All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact (440) 534-600 or email: to discuss reasonable accommodations.

Job Description The Claims Specialist manages within company best practices lower-level, non-complex and non-problematic workers’ compensation claims within delegated limited authority to best possible outcome, under the direct supervision of a senior claims professional, supporting the goals of claims department and of CorVel. This role can be performed as hybrid or remote. ESSENTIAL FUNCTIONS & RESPONSIBILITIES: • Receives claims, confirms policy coverage and acknowledgment of the claim, • Determines validity and compensability of the claim, • Establishes reserves and authorizes payments within reserving authority limits, • Manages non-complex and non-problematic medical only claims and minor lost-time workers’ compensation claims under close supervision, • Communicates claim status with the customer, claimant and client, • Adheres to client and carrier guidelines and participates in claims review as needed, • Assists other claims professionals with more complex or problematic claims as necessary, • Requires regular and consistent attendance, • Additional projects and duties as assigned KNOWLEDGE & SKILLS: • Excellent written and verbal communication skills, • Ability to learn rapidly to develop knowledge and understanding of claims practice, • Ability to identify, analyze and solve problems, • Computer proficiency and technical aptitude with the ability to utilize MS Office including Excel spreadsheets, • Strong interpersonal, time management and organizational skills, • Ability to meet or exceed performance competencies, • Ability to work both independently and within a team environment EDUCATION & EXPERIENCE: • Bachelor's degree or a combination of education and related experience, • Minimum of 1 year of industry experience and claims management preferred, • State Certification as an Experienced Examiner PAY RANGE: CorVel uses a market based approach to pay and our salary ranges may vary depending on your location. Pay rates are established taking into account the following factors: federal, state, and local minimum wage requirements, the geographic location differential, job-related skills, experience, qualifications, internal employee equity, and market conditions. Our ranges may be modified at any time. For leveled roles (I, II, III, Senior, Lead, etc.) new hires may be slotted into a different level, either up or down, based on assessment during interview process taking into consideration experience, qualifications, and overall fit for the role. The level may impact the salary range and these adjustments would be clarified during the offer process. Pay Range: $51,807 - $83,551 A list of our benefit offerings can be found on our CorVel website: CorVel Careers | Opportunities in Risk Management In general, our opportunities will be posted for up to 1 year from date of posting, or until we have selected candidate(s) to fulfill the opening, whichever comes first. ABOUT CORVEL CorVel, a certified Great Place to Work® Company, is a national provider of industry-leading risk management solutions for the workers’ compensation, auto, health and disability management industries. CorVel was founded in 1987 and has been publicly traded on the NASDAQ stock exchange since 1991. Our continual investment in human capital and technology enable us to deliver the most innovative and integrated solutions to our clients. We are a stable and growing company with a strong, supportive culture and plenty of career advancement opportunities. Over 4,000 people working across the United States embrace our core values of Accountability, Commitment, Excellence, Integrity and Teamwork (ACE-IT!). A comprehensive benefits package is available for full-time regular employees and includes Medical (HDHP) w/Pharmacy, Dental, Vision, Long Term Disability, Health Savings Account, Flexible Spending Account Options, Life Insurance, Accident Insurance, Critical Illness Insurance, Pre-paid Legal Insurance, Parking and Transit FSA accounts, 401K, ROTH 401K, and paid time off. CorVel is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. #LI-Hybrid

Job Description Looking for a career change or looking to get your career started? Affinity recruiting is looking to fill entry-level 1st shift manufacturing positions here in the Syracuse, NY location. $15.50 - $17.25 per hour (depending on experience) Full-Time positions, 40 hours a week, M-F schedule, 6am – 2:30pm! The Job: * Retrieve and return patterns to and from storage using a cart or forklift * Keep accurate record of pattern locations * Gather and set up other molding equipment and supplies for molders * Assist to evaluate the condition of the patterns * Perform minor repairs on patterns * Work closely with pattern makers and supervisors * Check process sheets for accuracy * Interface with the office to update pattern and process information * Perform any and all other job related tasks as assigned * Basic math skills and use of a ruler require Ideal candidate: * Okay with routinely lifting 30-50lbs * Okay working in a hot and dirty environment. * Can be dependable to show up and do a great job! * Someone looking for a career and eager to learn! Other positions we are recruiting for: * Grinder * Melter/Pourer If these are positions that are of interest to you and you are looking for an exciting career in the manufacturing environment please reply to this posting, with an updated resume, and a recruiter will reach out to you immediately!

Job Description • Schedule: Variable, • Typically 8-10 hour day shifts depending on department need, • Normally for 5 shifts of 40 hours per week, • Contract End Date: 04/04/2026 with potential to be extended Key Responsibilities: • Certification in Computed Tomography and Diagnostic X-ray with the ARRT., • Computed Tomography (CT) requires specific knowledge of cross-sectional human anatomy and its application in spiral, and/or, multi-slice computer tomography, inclusive of 3-D reconstruction scans, including drainages, biopsies, and peripheral vascular examinations., • Specific knowledge and training in the location, appearance, and function of the various major and minor systems susceptible to radiological illumination; to interpret the examination request accurately; to understand the functioning and inter-relationship of the various organs; to use the methods and techniques which will identify organs appearing on the digital display monitor, or on film, and the various stages of the examination to judge the acceptability of the image and/or scan for diagnostic use and to emphasize the aspects of interest to the physician. [DRT assignments that include performance of independent duties in this subspecialty require advanced ARRT certification.], • Experience in procedures such as IVP, GI series, Modified Barium Swallow, barium and air contrasted barium enema exams., • Experience with sterile supplies, local anesthetics, contrast materials, catheters, and other required equipment are presented properly for the attending radiologist(s)., • Experience with interoperative portable and portable c-arm cases., • Experience with portable c-arm cases in Pain Management., • Experience on 128 slice, 64 Slice Light Speed Computed Tomography Scanners., • Experience in Cardiac CT exams with retro and prospective gating, Interventional/CT Procedures with CT Fluoro such as Lung biopsy, RFA’s, Cryo-Ablations and Microwave ablations., • Experience with general x-ray and be responsible for performing a full range of CT exams. This will consist of both contrasted and non-contrasted exams in both areas, and tracking of reportable CT doses., • Experience and knowledge of Intravenous Contrast Agents used in Radiology and Hydration Procedures., • Knowledge of digital imaging and PACS., • Experience with VISTA (CPRS) Charting Systems preferred, but not required. Requirements • ARRT in Computed Tomography (CT), • American Heart Association BLS/CPR, • 3 years of experience in exams

Job Description • Schedule: Full Time, Monday-Friday 7:30am-4:00pm, • Contract End Date: 4/30/2026 with potential to be extended Key Details: • Specific knowledge and training in the location, appearance, and function of the various major and minor systems susceptible to radiological illumination, • To interpret the examination request accurately, • To understand the functioning and inter-relationship of the various organs, • To use the methods and techniques which will identify organs appearing on the digital display monitor, or on film, and the various stages of the examination to judge the acceptability of the image and/or scan for diagnostic use and to emphasize the aspects of interest to the physician., • Nuclear Medicine assignments that include performance of independent duties in this subspecialty require certification by the Nuclear Medicine Technology Certification Board (NMTCB) or by the American Registry of Radiologic Technology, RT (N)., • Experience with VISTA (CPRS) Charting Systems preferred, but not required. Requirements • Minimum of three years of experience in exams performed at the Syracuse VAMC., • Nuclear Medicine Technologists must be certified in Nuclear Medicine Technology by the Nuclear Medicine Technology Certification Board (NMTCB) or by the American Registry of Radiologic Technology, RT (N)., • Medical, Dental, and Vision options provided, • Accumulate up 56 hours of sick time, • 80 hours of vacation on the anniversary of your first year

Job Description Superintendent – Affordable Housing Come join our AMAZING team!! CRM Rental Management, Inc. is hiring a Superintendent at our Clinton Plaza Apartments in Syracuse, NY! Please visit: to learn more about CRM. Our company continues to grow and expand providing us with the opening for new talent! Why join our Amazing Team?! CRM Benefits: • 11 paid holidays (includes 1 floating holiday and the day after Thanksgiving!), • Excellent insurance options/benefits that are up to 75% employer paid!, • 100% up to 5% 401k match, • Competitive Salary, • Annual reviews with performance-based bonuses, • EAP including Discount programs The Superintendent’s primary duty is to assist the Regional Director of Maintenance in their duty by leading the Maintenance Team to ensure a safe, secure, and comfortable living environment for residents, visitors, and team members by maintaining the physical integrity of the property. • Maintain the physical condition of entire property., • Lead and supervise the maintenance team., • Maintain relationships with other team members and residents, suppliers, vendors, and professionals servicing the company or property., • Diagnose and performs all minor, major, and routine maintenance., • Handle inventory., • Ensure preventative maintenance and safety protocols are established and met., • Minimum 3 years full-time maintenance experience., • Ability to supervise, teach, and motivate team., • Knowledge of electricity, plumbing, carpentry, HVAC, painting, and various appliances., • Willingness to perform tasks required and to learn and grow. Monday - Friday, 8:00am - 4:30pm On-Call availability is a must. 40 hours per week.

Job Description The Claims Specialist manages within company best practices lower-level, non-complex and non-problematic workers’ compensation claims within delegated limited authority to best possible outcome, under the direct supervision of a senior claims professional, supporting the goals of claims department and of CorVel. This is a remote role. ESSENTIAL FUNCTIONS & RESPONSIBILITIES: • Receives claims, confirms policy coverage and acknowledgment of the claim, • Determines validity and compensability of the claim, • Establishes reserves and authorizes payments within reserving authority limits, • Manages non-complex and non-problematic medical only claims and minor lost-time workers’ compensation claims under close supervision, • Communicates claim status with the customer, claimant and client, • Adheres to client and carrier guidelines and participates in claims review as needed, • Assists other claims professionals with more complex or problematic claims as necessary, • Additional duties as assigned KNOWLEDGE & SKILLS: • Excellent written and verbal communication skills, • Ability to learn rapidly to develop knowledge and understanding of claims practice, • Ability to identify, analyze and solve problems, • Computer proficiency and technical aptitude with the ability to utilize Microsoft Office including Excel spreadsheets, • Strong interpersonal, time management and organizational skills, • Ability to meet or exceed performance competencies, • Ability to work both independently and within a team environment EDUCATION & EXPERIENCE: • Bachelor's degree or a combination of education and related experience, • Minimum of 1 year of industry experience and claims management preferred, • State Certification as an Experienced Examiner PAY RANGE: CorVel uses a market based approach to pay and our salary ranges may vary depending on your location. Pay rates are established taking into account the following factors: federal, state, and local minimum wage requirements, the geographic location differential, job-related skills, experience, qualifications, internal employee equity, and market conditions. Our ranges may be modified at any time. For leveled roles (I, II, III, Senior, Lead, etc.) new hires may be slotted into a different level, either up or down, based on assessment during interview process taking into consideration experience, qualifications, and overall fit for the role. The level may impact the salary range and these adjustments would be clarified during the offer process. Pay Range: $51,807 - $83,551 A list of our benefit offerings can be found on our CorVel website: CorVel Careers | Opportunities in Risk Management In general, our opportunities will be posted for up to 1 year from date of posting, or until we have selected candidate(s) to fulfill the opening, whichever comes first. ABOUT CORVEL CorVel, a certified Great Place to Work® Company, is a national provider of industry-leading risk management solutions for the workers’ compensation, auto, health and disability management industries. CorVel was founded in 1987 and has been publicly traded on the NASDAQ stock exchange since 1991. Our continual investment in human capital and technology enable us to deliver the most innovative and integrated solutions to our clients. We are a stable and growing company with a strong, supportive culture and plenty of career advancement opportunities. Over 4,000 people working across the United States embrace our core values of Accountability, Commitment, Excellence, Integrity and Teamwork (ACE-IT!). A comprehensive benefits package is available for full-time regular employees and includes Medical (HDHP) w/Pharmacy, Dental, Vision, Long Term Disability, Health Savings Account, Flexible Spending Account Options, Life Insurance, Accident Insurance, Critical Illness Insurance, Pre-paid Legal Insurance, Parking and Transit FSA accounts, 401K, ROTH 401K, and paid time off. CorVel is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. #LI-Remote

Job Description BROAD FUNCTION: Assist with general maintenance duties to include routine installation, inspection, maintenance, and repair of electrical, mechanical, and plumbing systems, etc., to maintain the facility grounds and equipment, and building elements. Hours: Full Time. 37.5 hours a week. Monday-Friday 9a-5p and every other weekend. MAJOR DUTIES AND RESPONSIBILITIES: 1. Assist maintenance mechanics with daily operations in a safe and efficient manner in accordance with current applicable Federal, State, and local standards, guidelines, and regulations, as well as the facility's established policies and procedures on a multitude of plumbing, electric Steam, air handling, refrigeration, and building., 2. Daily air and water temperatures in accordance with Department of Health regulations., 3. Removes trash from parking lot and outdoor garbage receptacles., 4. Removes recycling and shredding documents in accordance with facility procedure., 5. Assists with minor or large paint projects as directed., 6. Assists mechanics with plumping, HVAC, and electrical repairs as directed., 7. Assure that work areas and corridors etc. are clean and free of hazardous conditions and that tools, supplies, etc. are properly stored before leaving such areas on breaks, end of work day, etc., 8. Report all unsafe/hazardous conditions, defective equipment, breakdowns, incidents/accidents, etc., to your supervisor immediately., 9. All other related duties as assigned by supervisor. PHYSICAL REQUIREMENTS: Ability to repetitively lift 25 — 50 lbs., push / pull up to 250 lbs., repetitively reaches above head, climb etc. MINIMUM QUALIFICATIONS: High school graduate or GED Benefits: • Dental insurance, • Health insurance Work Location: In person

Job Description Pay range: $20-$22 hourly About Us ADESA, a Carvana owned company, currently operating over 50 locations throughout the US. Our Auto Auctions, some up to 200 acres, provide a wide array of vehicle services including repair & reconditioning, auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Get a sneak peek into life at ADESA! Role and Team • Make sure customers receive prompt, efficient and courteous attention by providing excellent customer service and responding to phone calls, emails, and text messages in a timely manner., • Resolve customer complaints in a friendly, courteous manner and advise Management of all serious complaints or incidents., • Maintain a professional appearance, orderly work environment and friendly disposition by greeting customers and guests promptly and with courtesy, both on the phone and in person., • Arrange Hotel and Flight reservations with our local transportation department., • Contact dealers daily to solicit and develop new buy business and sell business via telephone and internet. Discuss inventory needs, current and future promotions, and upcoming sales., • Maintain current customers and act as liaison for Outside Sales Representative, consignment dealers and auction personnel by maintaining relationships and developing new business., • Complete a minimum number of calls as set forth by the GSM or designated manager and log each call., • Perform Sale Day duties as set forth by GSM or Sales Supervisor. This includes but is not limited to providing exceptional customer services, IF duties, block representation, printing reports, setting-up displays and post-sale reporting., • Build strong ADESA.com customer relationships through training, education, and awareness to match the customer's needs to the product offerings. Navigate and educate customers on all aspects of ADESA.com and smart phone applications., • Responsible for impacting and achieving overall sales goals. Practice and promote teamwork at all times while setting a good example of attitude and performance., • Properly use and navigate ADESA's CRM to log calls, run reports and view dashboards., • Communicate with all departments to ensure proper marketing of sale inventory and maximize vehicle exposure for sale., • Vehicle exposure for specific units and consigners (Call Campaigns), • Educate customers on new and existing services to meet overall company goals., • Respond to and follow proper procedures on employee and customer accidents, injuries and loss or damage to any property. Report all incidents to the GSM and/or Sales Supervisor., • Practice and promote Company Core Values: Integrity, Customer Care, Innovation, Safety, Teamwork, Employee Welfare, Community Involvement and Fun., • Must know, practice and ensure that Company policies, procedures, and applicable state and federal laws are followed at all times., • Strong computer ability, • Excellent customer service skills, • Sales and marketing experience, • Office Administration Experience, • Bilingual a plus, • Salesforce and Tableau experience a plus, • Ability to work independently and exercise good business judgment and discretion, • Well organized and responsible with an aptitude in problem solving, • Excellent verbal and written communications, • Strong multitasking skills along with the ability to adapt to changing work environments, • High School or GED required., • 1 year of customer service and administrative experience., • Automotive/auction experience preferred., • Must be at least eighteen (18) years of age., • Must be qualified to operate a motor vehicle and possess a valid driver's license., • Must have a demonstrated ability to read, write, and communicate effectively in English. Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Light to Medium Physical Work., • Frequent – standing, watching, touching, listening, walking, talking, • Potential – running, jumping, yelling or other rapid or forceful movement in emergency situations This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. * Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Pay range: $20-$22 hourly About Us ADESA, a Carvana owned company, currently operating over 50 locations throughout the US. Our Auto Auctions, some up to 200 acres, provide a wide array of vehicle services including repair & reconditioning, auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Get a sneak peek into life at ADESA! Role and Team • Make sure customers receive prompt, efficient and courteous attention by providing excellent customer service and responding to phone calls, emails, and text messages in a timely manner., • Resolve customer complaints in a friendly, courteous manner and advise Management of all serious complaints or incidents., • Maintain a professional appearance, orderly work environment and friendly disposition by greeting customers and guests promptly and with courtesy, both on the phone and in person., • Arrange Hotel and Flight reservations with our local transportation department., • Contact dealers daily to solicit and develop new buy business and sell business via telephone and internet. Discuss inventory needs, current and future promotions, and upcoming sales., • Maintain current customers and act as liaison for Outside Sales Representative, consignment dealers and auction personnel by maintaining relationships and developing new business., • Complete a minimum number of calls as set forth by the GSM or designated manager and log each call., • Perform Sale Day duties as set forth by GSM or Sales Supervisor. This includes but is not limited to providing exceptional customer services, IF duties, block representation, printing reports, setting-up displays and post-sale reporting., • Build strong ADESA.com customer relationships through training, education, and awareness to match the customer's needs to the product offerings. Navigate and educate customers on all aspects of ADESA.com and smart phone applications., • Responsible for impacting and achieving overall sales goals. Practice and promote teamwork at all times while setting a good example of attitude and performance., • Properly use and navigate ADESA's CRM to log calls, run reports and view dashboards., • Communicate with all departments to ensure proper marketing of sale inventory and maximize vehicle exposure for sale., • Vehicle exposure for specific units and consigners (Call Campaigns), • Educate customers on new and existing services to meet overall company goals., • Respond to and follow proper procedures on employee and customer accidents, injuries and loss or damage to any property. Report all incidents to the GSM and/or Sales Supervisor., • Practice and promote Company Core Values: Integrity, Customer Care, Innovation, Safety, Teamwork, Employee Welfare, Community Involvement and Fun., • Must know, practice and ensure that Company policies, procedures, and applicable state and federal laws are followed at all times., • Strong computer ability, • Excellent customer service skills, • Sales and marketing experience, • Office Administration Experience, • Bilingual a plus, • Salesforce and Tableau experience a plus, • Ability to work independently and exercise good business judgment and discretion, • Well organized and responsible with an aptitude in problem solving, • Excellent verbal and written communications, • Strong multitasking skills along with the ability to adapt to changing work environments, • High School or GED required., • 1 year of customer service and administrative experience., • Automotive/auction experience preferred., • Must be at least eighteen (18) years of age., • Must be qualified to operate a motor vehicle and possess a valid driver's license., • Must have a demonstrated ability to read, write, and communicate effectively in English. Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Light to Medium Physical Work., • Frequent – standing, watching, touching, listening, walking, talking, • Potential – running, jumping, yelling or other rapid or forceful movement in emergency situations This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. * Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $35-$42/hr, • Sign on Bonus: Up to $3,000.00 DOE, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: · Ability to report to work in a timely manner as scheduled by supervisor. · Repair and overhaul equipment such as compressors, water pumps, air handlers, electrical and mechanical control devices and other similar machinery. · Test malfunctioning systems and components using electrical and/or mechanical skills. · Maintain legible corporate and personal records of work history. · Provide general repair work on refrigeration, heating and ventilation equipment such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors. · Provide preventative maintenance activities; diagnose equipment malfunctions and operating efficiency of mechanical equipment. · Perform work on minor construction and remodeling projects including startups of new installations. · Embodies the CoolSys CARES culture (Collaboration, Accountability, Respect, Empowerment, Safety). · Performs other duties as assigned. Qualifications: Education / Training · High school diploma or GED, equivalent work experience and trade or technical school classes. · Valid EPA certificate. Work Experience / Skills · 3-5 year's experience in commercial HVAC, refrigeration, and electrical required. · Basic knowledge of refrigeration, HVAC, ice machines, gas furnaces, and electrical. · Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus. · Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. · Knowlege of the components in a single-phase compressor and single-phase motor control circuit. · Ability to use an ohmmeter. · Ability to verify a capacitor is in good standing. · Ability to demonstrate an understanding of defrost circuits. · Knowledge of schematic and wiring diagram. · Ability to identify/explain function of refrigeration components. · Ability to properly leak check a single-compressor system. · Ability to demonstrate proper PPE and safety equipment. · Ability to set up LPC as the primary temperature control and as a pump down safety control. · Ability to demonstrate how to determine superheat and how to set expansion valve superheat. · Ability to verify a defrost termination is functional. · Ability to demonstrate the proper tasks for performing preventative maintenance on HVAC systems. · Ability and knowledge of the functions and safety precautions of the components of a gas furnace system. · Ability to properly recover refrigerant from a refrigeration system. · Ability to change oil in a vacuum pump. · Ability to demonstrate how to properly hook up a gauge set for evacuation. · Knowledge of reporting procedure for a large refrigerant release. · Knowledge of level 2 experience/information. · Must be able to lift up to 60 lbs. with no assistance and be able to sit and/or stand for several hours at a time. · Valid driver’s license. · Good driving record. · Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. · Ability to use typical business tools including E-Mail, Word, Excel, etc. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on ___ and ___. CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Job Description Full Time candidates are welcome to apply. Additional pay for weekends & overnight! Shifts: Job Summary: Veo seeks operations professionals who are passionate about providing riders with excellent experience by maintaining our vehicles and continually improving the efficiency of our fleet operations. E-Scooter Delivery Drivers locate, swap batteries, and rebalance vehicles throughout the city and perform quality checks and minor repairs. The ideal candidate for this role will be a team player who loves to solve problems, work with their hands, and be active throughout an entire shift. Responsibilities: • Follow the mobile App instruction to complete shift tasks, • Drive a company's van to find scooters and swap battery, • Rebalance scooters from low demand to high demand areas, • Perform basic repair and quality check, • Respond to on-demand requests to locate/retrieve scooters, • 21+ years old, • Valid driver license and acceptable driving record, • Have a smartphone and be App-savvy, • Ability to lift up to 80 lbs scooters without assistance, • Knowledge of the local geography and street layout, • Flexible schedule including early morning, night, and weekend shifts, • Competitive hourly wage, • Opportunity to work in a fast-paced, early stage technology company, • Veo credits, • Flexible work hours, • Full time employees are eligible for: Medical/dental/vision coverage, PTO Below is the expected salary range for this position. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and candidate qualifications.Pay Range $16.50—$18 USD

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at Scope: Responsible for administrative portion of a compliant calibration program. This position requires the ability to multi-task along with strong attention to detail which is critical for this role. Work with little or minimal supervision to perform the following duties: Duties: Responsibilities: \n • Follow established procedures and guidelines to ensure accurate and reliable results\n, • Maintain calibration records and documentation in accordance with quality standards\n, • Collaborate with team members to improve calibration processes and procedures\n, • Provide technical support and assistance to customers as needed\n, • Adhere to safety protocols and maintain a clean and organized work area\n, • Able to process all Send outs (INFOR, Shippers, Excel, Work) including: outgoing, receiving, repair.\n, • Able to enter New Equipment processing (AS400)\n, • Triage walk-in customers (AS400)\n, • Able to process scrapping of equipment (AS400, Excel)\n, • Able to process onsite Calibration Vendors\n, • Able to enter administrative and procedures in ETQ (Word)\n, • Monitor spreadsheets for equipment processing (Excel)\n, • Enter the daily metrics for Calibration KPI (Excel)\n, • Tracking down equipment for Calibration (Excel, AS400)\n, • Coordinating production equipment calibrations (AS400, Word, Excel)\n, • Database management (Word, Excel)\n, • Minor project tracking (Excel, Word, PowerPoint)\n\n Job Knowledge, Skills and Abilities: \n • Must have excellent PC skills, proficiency in the use of most Windows based software, both stand-alone software as well as equipment based. This includes, but is not limited to Word, AutoCAD, Excel, Project, and other standard programs.\n, • Good verbal and written skills with an excellent command of the English language.\n, • Must work well with all levels of the organization and have the ability to train others and work as a member of inter-disciplinary teams.\n, • Basic technical writing skills and experience\n, • Excellent attention to detail and problem-solving skills\n, • Ability to work independently and as part of a team\n, • Ability to lead small projects both inside and outside calibration\n, • Perform vendor negotiations for new equipment\n, • Schedule outside vendors for onsite calibrations\n, • Provide support for audits\n, • Proficiency in data analysis and structured problem solving including publishing and documenting the results is preferred.\n, • Ability to adapt and learn new skills due to continually changing work environment.\n, • A self-starter with the ability to work without direct supervision and a sense of urgency to meet production goals and customer expectations.\n, • Strong attention to details.\n\n #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $40,845 - $64,561 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job Description Jefferson Tower, located in the heart of downtown Syracuse, is seeking a skilled and reliable Maintenance Technician to join our residential apartment community and ensure our residents enjoy a safe, comfortable, and well-maintained living environment. The Maintenance Technician is responsible for performing repairs, preventative maintenance, and general upkeep of the property, including plumbing, electrical, HVAC, carpentry, and appliance work. The ideal candidate is detail-oriented, safety-focused, and committed to providing excellent service to ensure a comfortable living environment for all residents. Responsibilities: • Perform routine maintenance and repair tasks including plumbing, electrical, HVAC, carpentry, painting, and appliance repair., • Respond promptly to resident service requests and ensure issues are resolved efficiently., • Complete preventative maintenance on building systems and equipment to reduce breakdowns., • Maintain the overall appearance and safety of the property, including common areas and grounds., • Troubleshoot and identify maintenance problems, providing effective solutions., • Assist with apartment turnover, including cleaning, painting, and minor repairs between residents., • Ensure compliance with safety standards and maintain accurate maintenance records., • Work collaboratively with property management and other staff to support smooth community operations. Qualifications: Working knowledge of Plumbing, HVAC, Electrical, Carpentry and Appliances Ability to work a rotating on-call schedule and extended hours as required Strong Interpersonal skills, the ability to communicate effectively, and diffuse conflict Strong organization skills and ability to multitask Must exhibit competence in decision making and employing judgment Must have the ability to lift 50lbs Valid Driver's License a Must and have reliable transportation Join our team as a Maintenance Technician and play a key role in creating a welcoming, well-cared-for community. From fixing repairs to keeping the property in great shape, you’ll work closely with both the team and our residents to make sure everyone feels right at home.

Title: Bioprocess Associate – Night Shift (6pm – 6am) Primary Recruiter: Jane Bautista Pay Rate:: $20/Hour Position Type: initial 6 months contract (possible extension) Location: East Syracuse, NY, United States Schedule: Fixed shift schedule. 36 hours the first week, 48 hours the next week, alternating. NIGHT: 6 pm – 6 am. Must be willing to work scheduled holidays, weekends, and overtime. This is a NIGHT shift role. Position Overview: • Work is performed in a biologics manufacturing environment with classified areas requiring clean hygiene, specified gowning, and personal protective equipment (PPE). This is not a lab position., • This is an entry level position that will train for proficiency within assigned functional area(s). Biologics orientation and job function training will be provided. 100% Onsite. Primary Responsibilities: • Set-up, operation, and cleaning of process equipment including manipulation of valves, hoses, clamps, piping, etc., • Prepare buffers, media, and reagents up to 2000L, • Monitor process parameters and escalate abnormal conditions, • Maintain accurate documentation, • Sustain a clean and orderly work environment, • Achieve and maintain proficiency of above responsibilities through training, • This position includes physical demands which may involve bending, twisting, squatting, kneeling, climbing, or reaching as well as infrequent unassisted lifting (not to exceed 50lb), • This role will require handling and working with hazardous materials such as caustic, acid and steam Requirements: • High school diploma, • Ability to adhere to written instruction, verify data, perform minor mathematics equations with instruction and accurately document results to perform work safely and compliantly, • Ability to collaborate with teammates to execute scheduled work safely and compliantly, • Strong communication skills, • Familiarity with common computer tools, such as web-based applications, • Possess a continuous improvement mindset, a desire to learn, and a drive to contribute to a culture of excellence and our mission of delivering benefits to patients worldwide Nice to Have: • Mechanical aptitude, • Familiarity with general chemistry, microbiology, or clean room operations, • Prior manufacturing experience, • Prior experience with cGMP operations or aseptic technique

Job Title: Bioprocess Associate – Day Shift (6pm – 6am) Location: East Syracuse, NY 13057 Duration: 6 Months Responsibilities Job Type: Contract. This 6-month position starts ASAP. Schedule: Fixed shift schedule. 36 hours the first week, 48 hours the next week, alternating. • DAY: 6AM – 6PM, • Work is performed in a biologics manufacturing environment with classified areas requiring clean hygiene, specified gowning, and personal protective equipment (PPE). This is not a lab position., • This is an entry level position that will train for proficiency within assigned functional area(s). Biologics orientation and job function training will be provided., • Set-up, operation, and cleaning of process equipment including manipulation of valves, hoses, clamps, piping, etc., • Prepare buffers, media, and reagents up to 2000L, • Monitor process parameters and escalate abnormal conditions, • Maintain accurate documentation, • Sustain a clean and orderly work environment, • Achieve and maintain proficiency of above responsibilities through training, • This position includes physical demands which may involve bending, twisting, squatting, kneeling, climbing, or reaching as well as infrequent unassisted lifting (not to exceed 50lb)., • High school diploma, • Ability to adhere to written instruction, verify data, perform minor mathematics equations with instruction and accurately document results to perform work safely and compliantly, • Ability to collaborate with teammates to execute scheduled work safely and compliantly, • Strong communication skills, • Familiarity with common computer tools, such as web-based applications, • Mechanical aptitude, • Familiarity with general chemistry, microbiology, or clean room operations, • Prior manufacturing experience, • Prior experience with cGMP operations or aseptic technique

Job Description Responsibilities: * Work is performed in a biologics manufacturing environment with classified areas requiring clean hygiene, specified gowning, and personal protective equipment (PPE). This is not a lab position. * This is an entry level position that will train for proficiency within assigned functional area(s). Biologics orientation and job function training will be provided. 100% Onsite. * Set-up, operation, and cleaning of process equipment including manipulation of valves, hoses, clamps, piping, etc. * Prepare buffers, media, and reagents up to 2000L * Monitor process parameters and escalate abnormal conditions * Maintain accurate documentation * Sustain a clean and orderly work environment * Achieve and maintain proficiency of above responsibilities through training * This position includes physical demands which may involve bending, twisting, squatting, kneeling, climbing, or reaching as well as infrequent unassisted lifting (not to exceed 50lb) * This role will require handling and working with hazardous materials such as caustic, acid and steam Requirements: * High school diploma * Ability to adhere to written instruction, verify data, perform minor mathematics equations with instruction and accurately document results to perform work safely and compliantly * Ability to collaborate with teammates to execute scheduled work safely and compliantly * Strong communication skills * Familiarity with common computer tools, such as web-based applications * Possess a continuous improvement mindset, a desire to learn, and a drive to contribute to a culture of excellence and our mission of delivering benefits to patients worldwide * Mechanical aptitude * Familiarity with general chemistry, microbiology, or clean room operations * Prior manufacturing experience * Prior experience with cGMP operations or aseptic technique * Schedule: Fixed shift schedule. 36 hours the first week, 48 hours the next week, alternating. DAY: 6AM - 6PM, NIGHT: 6 pm - 6 am. Must be willing to work scheduled holidays, weekends, and overtime. This is a NIGHT shift role. Benefits: Healthcare Insurance: Synectics offers eligible employees and their dependents healthcare coverage through BlueCross BlueShield of Illinois. Eligibility begins on the 1st day of the calendar month following 60 days of continuous full time employment with Synectics. Premiums are subsidized by Synectics. Dental Insurance: Synectics offers eligible employees and their dependents a dental plan through MetLife. Eligibility begins on the 1st day of the calendar month following 60 days of continuous full time employment with Synectics. Vision Insurance: Synectics offers eligible employees vision insurance through VSP. Eligibility begins on the 1st day of the calendar month following 60 days of continuous full time employment with Synectics.401(k) Plan: The Synectics Inc. Investment Savings Retirement Plan. Synectics offers all employees who are 21 years of age or older the opportunity to invest in the 401(k) Plan on the first enrollment date that is at least 30 days after employment begins. Enrollment dates are each January 1st, April 1st, July 1st, and October 1st. Technical Certification Bonus: Synectics is pleased to award its employees a bonus of up to $500 for an approved professional certification. In determining the bonus amount, Synectics will consider the cost of the test(s) for any certification relating to your current position, achieved during your employment with us. Only one Certification Bonus per calendar year may be awarded per employee. Only current, active employees will be eligible to receive this bonus. It will be awarded 90 days after the Synectics office has received documentation confirming the successful completion of the certification. Synectics is an equal opportunity employer.

Eaton's ES GEIS CHD division is currently seeking a CNC Machinery Operator - 3rd shift. The core hours are 10:30 pm to 6:30 am. The hourly rate for this position is $21.71 per hour. What you'll do: \n • Perform a wide range of machining operations on two or more Numerically Controlled Lathes, Chuckers or Turning Centers, some of which may be equipped with automatic, robotic or manual load/unload systems and/or related secondary auto/manual equipment.\n, • Operate Six Spindle Automatic Bar Machines. \n, • Work with operation sheets, tapes and blueprints as required. \n, • Required to change tooling, load automatic tool changes and maintain quality standards by checking parts with adjustable or fixed gauges. \n, • Assist in isolating and correcting malfunctions in machining and control units. \n, • Perform various internal operations related to producing a finished product. \n, • Work from standard work and maintain visual controls and aids (charts, schedules, etc.) and accurate records as directed. \n, • Maintain work area, machines and control units in a clean, neat and orderly condition. \n, • Perform minor maintenance that includes cleaning, inspection, minor lubrication and tightening loose bolts. \n\n Qualifications: Basic (Required) Qualifications: \n • Minimum one (1) years' previous work experience in CNC operation \n, • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse, NY (50 miles) will be considered for this position.\n, • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.\n\n We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Our Emergency Department is a fast-paced team of interdisciplinary professionals ready to promote and restore health to all who enter. The Emergency Department offers RNs the opportunity for a wide variety of patient experiences from minor injuries in our Speed Unit, to Cardiac Arrest and Trauma. Fu

Part Time Emergency Department Registered Nurse. Our Emergency Department is a fast-paced team of interdisciplinary professionals ready to promote and restore health to all who enter. The Emergency Department offers RNs the opportunity for a wide variety of patient experiences from minor injuries in

This position will support the Civic and Community Engagement (CCE) Office and Minor, the Department of Sociology, and the Law, Society and Policy (LSP) Integrated Learning Major (ILM).This role provides student and faculty leadership with administrative support assisting with undergraduate academic

Our Emergency Department is a fast-paced team of interdisciplinary professionals ready to promote and restore health to all who enter. The Emergency Department offers RN’s the opportunity for a wide variety of patient experiences from minor injuries in our Speed Unit, to Cardiac Arrest and Trauma

Job DescriptionDirect Hire Machine Shop ManagerPay: $70,000-$90,000 annuallyHours: 6 a.m.- to be determined Staffworks is seeking a reliable Machine Shop Manager to join their award-winning team! What's in it for you?Direct Hire OpportunityGreat Salary Machine Shop Manager Details: • Plans and directs production to obtain maximum utilization of assigned employees and materials and to ensure on time shipment of parts meeting customer’s specifications, • Coordinates supply of raw materials, and perishable tools, • Revising working practices and observes employees to ensure compliance with standards, • Inspects equipment to ensure specific operational performance, • Coordinates repairs and preventive maintenance with Maintenance personnel to ensure minimum downtime., • Informs General Manager of employee problems that require his/her attention and the disposition of resolved minor problems, • Provides hands on departmental instruction and training, • Follows company’s performance appraisal policy and recommends merit increases, promotions, transfers and other personnel actions for assigned personnel.Machine Shop Manager Requirements, • High school graduate or equivalent., • A.S. in Mechanical technology or B.S. degree in engineering with a focus on particular process, • Supervisory experience in a manufacturing company specializing in CNC machining, • Technical experience in CNC machining/programming preferred., • Strong oral and written communication skills, • Computer literacy including Word, Excel, email, and Outlook., • Familiarity with an ERP system such as Syteline or SAP etc., • Five (5) years of production management experience

Monitor machine while working to adjust the feed, maintain temperature and identify issues Determine and program size of batches and speed of machine Monitor output to ensure consistency with specifications and discard defects Perform routine machine maintenance and repair minor damages. Machinist J

Wipe mirrors and windows Maintain outer premises by watering plants, mowing lawn, cleaning entrances Utilize insecticides to prevent infestation by dangerous pests Perform maintenance and minor repairs (replacing broken switches, fixing door handles, minor leaks etc.

Westrock - [Field Technician / Maintenance Technician] As a Maintenance Mechanic at Westrock, you'll: Perform routine and extensive preventative maintenance and repair procedures on electrical and mechanical systems involving production equipment and plant systems; Perform minor and major repair of

Job Description We are seeking a Property Caretaker and Management Supervisor to become a part of our team! You will perform necessary work to keep our three properties in good condition while also tending regularly to tenant requests and needs which is facilitated through a 3rd Party Management and Request System. Responsibilities: • Supervise Work of Repair and Maintenance Personnel, • Minor repair and maintenance work. Oversight of 3rd Party Repair and Maintenance on Property, • Able to prepare weekly draft budget or repair plans, based on a rough idea of known needs, • Prepare a monthly forecast for repair, maintenance and budget, • Prepare semi-annual forecast for repair, maintenance and budget, • Complete maintenance and repair work orders, in a timely fashion, • Respond timely to tenant requests where applicable, • Maintain a clean and a safe work space and property setting, • Perform other duties, as assigned, • Report Directly to Corporate, • Previous experience in property maintenance or other related fields, • Familiarity with hand-held tools and equipment, • 2 or 4 Year College Degree, • Deadline and detail-oriented, • Ability to handle regular (close) travel among 3 properties, • Competence in Microsoft OfficeCompany DescriptionSeeking Property Manager for Boutique Multi-Family Commercial Property PortfolioSeeking Property Manager for Boutique Multi-Family Commercial Property Portfolio

Job Description Come join John W. Danforth Company, one of the largest mechanical contractors in the Northeast! We are an employee-owned company and believe our greatest asset is our people. We are looking for team members who are passionate about delivering industry-leading experiences to our customers and supplying turn-key solutions for any HVAC, refrigeration, critical environment, custom metal fabrication, energy performance, or specialty mechanical project. As a Shop Associate, you are accountable for the tasks required to support our jobsites and fabrication shops. You will be responsible for upholding safety standards and personnel, while maintaining effective and efficient processes for tooling, procurement, material handling, and quality checks of our tools, you’ll provide complete field support and on time deliveries leading to reduced overall project costs. Our fleet of vehicles ranges from pickups, box trucks, stake trucks, and more. Do you like hands-on work prioritizing safety and efficiency? If you’re looking to be a part of the industry and gain exposure to the different areas of construction, come work for a best-in-class organization. What We Offer: • Danforth invests in you and your future with directed employee engagement, team support, career development, and mentoring, • Provide tools and materials to various locations within the region while maintaining high levels of safety and professionalism, • Physical ability to load and unload cargo, • Make on-time deliveries to and from various jobsites and other destinations in the safest and most efficient manner possible with no delay to the field employees or customers, • Confirm all loaded items to ensure shop order is complete and verify proper attachment of all items before vehicle is started and you leave the shop/jobsite, • Assist in shop order process of pulling and returning tools for job sites by checking safety and accessories of each tool for proper operation, and keeping inventory for future jobs, • Maintain cube vans by unloading, inspecting and restocking for state of readiness and quick response jobs, • Execute minor shipping/receiving duties as assigned by Tool Shop Manager, • Assist at warehouse, and sheet metal shop when needed, • High school degree or equivalent, • 18+ years old, • Must have a valid driver’s license, clean driving record and adhere to safe driving rules and all safety requirements, • Must be willing to work flexible hours including nights and weekends, • Strong communication skills; oral, written, and computer John W. Danforth Company is an equal opportunity employer and is committed to a workplace free from discrimination. All employees and applicants for employment will be considered without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Job Title: Reefer Technician Company Introduction: G&C Food Distributors is a re-distributor of refrigerated, frozen, and dry food. We store and deliver more than 4,000 food items to meet the needs of our customers across 27 states and 35 countries internationally. In recent years, G&C Foods has become one of the most respected redistributors in the United States. We are rapidly expanding all areas of our organization. Enjoy hands-on work and keeping things running smoothly? As a Reefer Technician, you’ll ensure our refrigerated trailers are in top condition and ready to roll! Location: Syracuse, NY Job Summary: The Transportation Maintenance Mechanic will be responsible for all maintenance on our fleet of over 160 trucks. Duties and Responsibilities: • Performing preventative maintenance and required repairs on G&C-owned diesel equipment such as Yard Trucks, Trailers, and Road Tractors, • Performing minor repairs to G&C Leased equipment when necessary, • Assist the Transportation Maintenance Supervisor with repairing the washing equipment, • 2-6 of experience in Reefer Trailer Repair, • Air Brake Certification preferred, • Diesel Engine Certification preferred, • Reefer Experience required, • NYS Driver’s License required, • CDL A or CLD B preferred, • Inspectors License preferred At G&C, we believe exceptional people deserve exceptional rewards. When you join our team, you’re not just taking a job, you’re stepping into a career with a company that invests in your growth, values your contribution, and celebrates your success. Our Benefits Package Includes: • Competitive Health Coverage – Medical plans starting at just $24.73/week, plus comprehensive vision, dental, and a 401(k) with company match to secure your future., • Company-Paid Life Insurance – Because your peace of mind matters., • Performance-Based Bonuses – Earn up to the equivalent of five additional weeks’ pay each year based on your impact and results., • Onsite Fitness & Wellness Centers – Stay active and healthy without leaving the workplace., • Flexible Scheduling Options – Designed to support your life outside of work., • Company Culture Perks – From team cookouts and appreciation events to seasonal holiday gifts, we celebrate our people year-round., • Exclusive Employee Product Discounts – Access unbeatable prices on a wide range of products, available only to our team., • Career Advancement – Clear pathways to grow within the company, backed by leadership who invest in your success., • Open-Door Leadership – Access to decision-makers who listen, act, and value your input., • Annual Flu Clinics – Convenient, no-cost health support right at work. Contact/Application Information: If you’re interested, please apply through Indeed. If you have any questions, you can email . Thank you for your interest, and we look forward to meeting you! #ADP1

Job DescriptionScrew Machine Operator Hours: 2nd shift 4:00pm-2:00amDays: Monday- Thursday Pay: $16.50 per hour plus 10% shift differential = $18.15 per hour Must train on 1st shift until training is complete Monday-Thursday5:00am-3:00pm$16.50 per hour Staffworks is seeking a reliable Screw Machine Operator to join their award-winning team! What's in it for you? - Shift Differential - Weekends Off - Temp to Hire Position - Will train person for position Screw Machine Operator Details:- Produces parts to required specifications by setting and operating conventional lathes, mills and other machinery.- Prepares machine for production including oiling the machine, starting and checking first part for possible defects. - Replaces tooling and makes minor adjustments under necessary supervision. - Ensures stock does not run out during production by inserting bar stock into spindles at end of machine. - Continuously cleans out chips during assigned shift. - Makes quality work using 3-pan system.- Checks parts after and during stock-up. - Makes out tickets that contain part numbers, machine number, operator number and date.- Maintains operational status of machine by monitoring condition of assigned machine - Report any needed repairs to the Maintenance Mechanic- Maintains work area and equipment in a clean and orderly fashion, abiding by company rules and safety regulations.- Performs all other duties as assigned.Screw Machine Operator Requirements:- High School diploma or GED, trade school certification a plus.- 1-3 years of prior Screw Machine operation experience.- Ability to read, write, and communicate in English.- General computer skills with the ability to use and learn SAP.- Ability to interpret geometric dimensions and tolerances (GD&T).- Basic mathematical knowledge to perform addition and subtraction.- Ability to utilize hand tools and have strong mechanical abilities.- Proficiency in blueprint reading.- Knowledge of and the ability to use micrometers and calipers.- Must demonstrate safe working habits, the ability to follow directions and work with minimal supervision.- Ability to work effectively in a team environment in a culturally diverse workplace. We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization. How to Apply Apply now for immediate consideration! "INDITES"

Job Description Frazer and Jones are looking to add Core Machine Operators to our foundry operations to support the business. This role works interpedently to support the daily functions for foundry production. Under the direction of the foundry foreman and/or manager, carries out repetitive operations creating and adjusting cores for the specific manufactured goods. Job Essential Functions: • Interprets and adjusts core machine pressure, temperature and timer indicators and makes adjustments to specified settings., • Makes minor repairs and adjustments, using simple measuring instruments such as a straight edge, level, measuring tape, rulers or calipers for core boxes., • Sets up and runs various core machines and changes core boxes, completes core tryouts, fills core trays and cleans cores., • Operates a fork truck to bring patterns and core machine materials throughout the plant., • Throughout the shift will drill, tap, ream and coin castings., • Evaluates thread and ream inspection during process., • Disposes of scape castings at workstation and performs housekeeping tasks such as cleaning area and core boxes., • Manually feeds materials through punch press, drilling or tapping machines., • Other duties as assigned by the foreman and/or manager. Education: High school diploma or GED, or the ability to understand fundamental English. Must be able to handle mathematical operations such as multiplication, division, converting fractions to whole numbers or decimals. Working Hours and Conditions: • 2nd Shift: Monday through Friday 2:00 PM through 10:30 PM., • The individual will need to train on the first few weeks on 1st Shift (Mon – Fri, 6 AM to 2:30 PM), • 8-hour shift assigned, may be assigned overtime via extension of shift or additional shifts., • Works in-person, this position cannot be done remotely., • Works in a foundry setting, may be exposed to environmental conditions such as varying temperatures from hot to cold and irritants such as dust, sand, etc. Pay and Benefits: • $18.08 - $20.82 per hour., • 2nd Shift receives $0.45 per hour differential., • Overtime after 8 hours in a day and after 40 hours in a week., • Medical, Dental and Vision insurance available the first of the month after hire., • Company paid short-term disability and life insurance., • 401k with 3% company match available upon hire., • Union membership.

The overall responsibility of the CCS Superintendent is to assist the Project Manager in the execution of projects. The superintendent may perform minor warranty work and must be experienced in manufactured home production/repair.

Company Overview: Allied Universal, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. May generate work orders and attached paperwork for extra security coverage requests * Responds to minor incidents (internal to Security

Job Description As employees of a farmer-owned cooperative, we come to work every day trying to honor the tireless effort and care these farming families put in every day, all day, 365 days a year. Our farmer-owners tend to think in generations, with some of our farms being run by the same families for over a century. We carry this approach into our business, knowing that each and every one of us makes a difference in allowing these generational traditions to continue, taking pride in knowing that we nourish our friends, neighbors, nation, and even the world with healthy and delicious dairy products. Our products include milk, flavored milk, yogurt, dip, sour cream, cottage cheese, Italian cheese, and ice cream mix marketed under the Upstate Farms®, Bison®, Milk for Life®, and Intense Milk® brands. As employees of a farmer-owned cooperative, we come to work every day trying to honor the tireless effort and care these farming families put in every day, all day, 365 days a year. Our farmer-owners tend to think in generations, with some of our farms being run by the same families for over a century. We carry this approach into our business, knowing that each and every one of us makes a difference in allowing these generational traditions to continue, taking pride in knowing that we nourish our friends, neighbors, nation, and even the world with healthy and delicious dairy products. Our products include milk, flavored milk, yogurt, dip, sour cream, cottage cheese, Italian cheese, and ice cream mix marketed under the Upstate Farms®, Bison®, Milk for Life®, and Intense Milk® brands. Large food manufacturer seeks applicants for production/sanitation areas. General Labor openings may include the following Production Support - Bag Room, Production Support - Pally Loader or Sanitation Specialist. All qualified, responsible applicants are encouraged to apply. We offer a competitive salary and generous paid time off. Must be able to work, weekends and Holidays. Essential Duties and Responsibilities: • Unloading, sorting, and loading the empty milk crates that are coming and going from deliveries and the warehouse., • Setting up, operating, and cleaning equipment that processes Dairy and Non-dairy products., • Performing all required operating procedures., • Sorting and bagging the empty plastic containers., • Introductory machine operating/trouble shooting., • Load the bags onto a truck with a dolly., • Unbag bottles if/when we run low to be transported to other departments in the facility., • Maintain area cleanliness, reports leaking or out of spec product and participate in waste reduction efforts, • Operate Pally loader and solves minor issues with machine., • Putting in carts and trays for pally building, corrects incoming bottle orientation, ensures out feed of assembled pallys., • Maintain production schedule, meeting order expectations and monitoring variances., • Maintain tidiness, and sanitation inside and outside the facility as needed., • Maintain and follow set of checklists Production Support Roles, Sanitation Roles, • Follow all Safety requirements to include, Housekeeping, Lock Out/Tag Out, PPE and engage in facility safety efforts., • High School Diploma or equivalent Must be a minimum of 18 years of age • No Experience required, • 1-3 years physical labor/janitorial experience preferred. Expectations: • Must be able to pass a pre-employment background and physical/drug screen, • Performs reasonable job-related tasks as requested., • Meets departmental productivity standards., • Actively participates in Continuous Improvement efforts., • Adheres to Company Policy and Procedures., • Ability to meet qualification card training plans., • Perform all job duties in a safe and compliant manner., • Operate in varied temperature ranges. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

ALOIS Healthcare is seeking a travel nurse RN OR - Operating Room for a travel nursing job in Syracuse, New York. • Specialty: OR - Operating Room, • Discipline: RN, • Start Date: ASAP, • Duration: 15 weeks, • 40 hours per week, • Shift: 10 hours, flexible ALOIS Healthcare Job ID #17201337. Pay package is based on 10 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN OR Why ALOIS Healthcare? ALOIS means “brave warrior” and that’s what you are- Warrior in Scrubs! Just as you advocate for your patients, we will advocate for you. The pay you deserve. The support you need. We’re in your corner for every battle – because you shouldn’t settle for anything less when it comes to your career. We offer: · Industry-leading pay · Weekly health insurance or health insurance Marketplace weekly bonus · Continuing education credits We’re proud to be recognized globally as a certified minority-owned staffing supplier. At ALOIS Healthcare: · Everyone Matters · We are Performance Driven · We are Open, Honest and Direct · We are Transparent · We are Inclusive · We Do the Right Thing We care about you - and your success is our success.

Job DescriptionOverview Company Overview: Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. Job Description Allied Universal is looking to hire an Assistant Account Manager. The Assistant Account Manager job is responsible for assisting the Account Manager with all supervisory, training and operations functions at the assigned post in accordance with post orders and client instructions, and following all internal procedures. To support and ensure success in this role, we provide a comprehensive, week-long management onboarding course designed to provide best practices, tools and guidance. Starting Salary $72,000.00 per year RESPONSIBILITIES: • Under the direction of the Account Manager, this position assists with the coordination of all aspects (technical and managerial) of executing the security contract at the assigned location. Assigns work tasks to Security Professionals and directs their work throughout the day, • This position is the first direct supervisory contact for shift supervisors (if applicable to site) or for Security Professionals, regarding performance, operations, and department needs. Responsible for supervising, motivating, coaching and training, • Also responsible for evaluating the work performance of Security Professionals and making recommendations regarding assignments, • Responsible for making sure that Post Order manual and all other post and training information is being properly maintained and updated, and that the Post is being properly maintained, cleaned and organized, • Assists the Account Manager in conducting interviews and evaluating new employees. Responsible for conducting on-the-job training, in coordination with Shift Supervisors, of new employees assigned to post, or when changes to post orders are made. This may include orientation to the post, review of post orders, routine responsibilities, and how to respond to emergency situations or specific client needs;, • Oversees all reports, logs and pass downs generated by and for the Security Department. Distributes communications and other information to Security Professionals at post as directed, • Manages and supervises all sub-units within the Security Department, such as fire control room, command center, and loading docks as applicable to job site. May generate work orders and attached paperwork for extra security coverage requests, • Responds to minor incidents (internal to Security Professionals and/or external to client location) that occur, ensuring appropriate action is taken, all reports are properly completed, and appropriate parties are notified in a timely manner, • Identifies any personnel problems occurring at posts, such as payroll issues, employee relations complaints or other concerns, and forward any such issues to Account Manager or Field Supervisor as appropriate. May be responsible for writing a report of the situation or assisting with an investigation, as directed by Account Manager, Branch Manager or Corporate HR Director, • Responsible for making recommendations for counseling and/or disciplinary action, including termination. May be responsible for administering counseling or disciplinary actions (may not make or initiate such decisions on his/her own, but may execute such actions at the specific direction of Account Manager with prior approval from Branch/Corporate HR management), • Responds to client or site emergencies as they arise, including ensuring appropriate communication to Account Manager, Field Supervisor, Branch and/or Regional Manager. Responsible for maintaining positive client/security relationships through frequent tenant/client contact and support, • May occasionally perform Security Professional type job duties on an as-needed basis by standing post, but under no circumstances to exceed more than 50% of time in any given workweek. QUALIFICATIONS: • Minimum high school diploma or equivalent required., • Minimum three (3) - five (5) years of professional-level experience required. Prior experience in the security industry, law enforcement and/or military required., • Must possess a valid state Guard License, or have applied and subsequently be issued such a license prior to employment. As a condition of employment, employee must successfully complete a background investigation and a post-offer/pre-employment drug/alcohol test. Additionally, as a condition of continued employment, employee must maintain current active status of Guard License at all times, and must carry the license at all times while on duty Driving Positions: must possess a valid Driver's License with at least one year of driving experience, a clean driving record (no major violations within last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by Company policy, and the ability to safely operate a vehicle required. • Energetic and focused personality with a demonstrated ability to take initiative, successfully handle and prioritize multiple competing assignments and effectively manage deadlines. Demonstration of strong customer service orientation required, with ability to effectively resolve client issues in a professional and service-focused manner and to de-escalate situations before they become hostile or unpleasant required, • Ability to write effective and concise reports in neat, legible handwriting is required, • Professional, articulate and able to use good independent judgment and discretion, • Ability to train and coach others, and to effectively enforce post orders, security standards and company policies equitably and consistently, • Outstanding verbal and written communication skills required. Ability to successfully interact at all levels of the organization, including with clients, while functioning as a team player required, • College education or business classes, • Experience in scheduling, operations or other functions of security industry, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401 (k) or Supplemental Income Plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal day If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1467056

Job Description Job Title: Sales Account Manager Momentum Environmental (Momentum) provides waste management, industrial cleaning, emergency response and remediation services to several private and public sector industries upstate New York including the manufacturing, engineering, chemical, transportation, retail, and distributed energy sectors. Momentum has an immediate opening for an experienced Account Manager (AM). Momentum services an impressive growing client base and the AM will be a driving force behind Momentum’s continued growth and success. The AM will report directly to the CEO and focus on the deployment of the strategic sales plan targeting customers who have needs across multiple service lines. We are seeking a dynamic and results-oriented Sales Account Manager to join our growing team. The ideal candidate will be responsible for managing key client accounts, fostering strong relationships, and driving sales growth within our target markets. This role offers the opportunity to work in a collaborative environment with a focus on achieving sales excellence and customer satisfaction. Key Responsibilities • Focuses business development efforts on the acquisition of recurring waste management,, • industrial cleaning, remediation, and ER services targeting the local manufacturing, utility,, • chemical, oil & gas, engineering, and transportation industries, • Identifies target accounts, develops, and executes account level growth plans by leveraging, • existing networks and new relationships, • Sets meetings, performs interactions, and conducts account penetration efforts to develop, • business opportunities in target service lines pursuant to annual growth targets, • Maintains a base of existing accounts while developing new business opportunities, • Maintains sufficient knowledge of all service lines in full support of the sales cycle and, • coordinates routinely with operational staff, • Performs minor estimating and proposal-writing, • Attends site meetings, relays vital information to colleagues and serves as the voice of the, • customer with the company, • Maintains weekly all sales pipeline account data in the company CRM and supports quarterly, • strategic and budgeting analysis, • Contributes to the annual sales plan while collaborating with operations and other executives, • regarding alignment with the company’s strategic plans, • Plays a role in the Company’s acquisition program by providing door opening opportunities,, • introductions, and market intelligence, • Contributes and participates in the company’s marketing program including social, print,, • tradeshow media, involvement in professional associations and sponsorship opportunities, • Routinely leads programs that regularly communicates with the Company’s clientele., • Plays an active role in the Health, Safety and compliance elements of the business, • Participates in the Company’s pricing program including T&M Rates, customer rates and fee, • Supports the execution of the sales plan and strategic growth initiatives by supporting sales and operational staff with major growth opportunities., • Five years of direct environmental experience including waste management, industrial cleaning,, • emergency response and/or remediation., • Recent business development experience, • A bachelor’s degree in chemistry, geology, or related environmental discipline is preferred, • Experience with CRM systems and the tracking of pipeline and customer data, • Enthusiasm to join a company early in its growth journey and leverage a sizable marke, • Entrepreneurial spirit and a bias for action; ability to work in a fast-paced environment, • Excellent communication skills including working knowledge of all MS office products, • Prior experience selling sustainability programs, transportation services, chemical sales,, • hazardous material handling services, safety services and programs, and manufacturing services preferred, • Competitive salaries, progressive, achievable bonus plans, and health benefits, • 401K with company match, • Paid Time Off (PTO), • EOE employer

Competitive pay / Medical, dental & vision / 401k - As a Collections Rep at Owens & Minor, you will: Monitor and manage assigned customer accounts to ensure timely payment of invoices; Make outbound calls to customers to collect on past due balances; Review and analyze customer payment history to de

Competitive pay / Medical, dental & vision / 401k - As a Collections Rep at Owens & Minor, you will: Monitor and manage assigned customer accounts to ensure timely payment of invoices; Make outbound calls to customers to collect on past due balances; Review and analyze customer payment history to de

Competitive pay / Medical, dental & vision / 401k - As a Collections Rep at Owens & Minor, you will: Monitor and manage assigned customer accounts to ensure timely payment of invoices; Make outbound calls to customers to collect on past due balances; Review and analyze customer payment history to de