Trabajos minor en Rochester, New YorkCrear alertas

Compensation Type: Hourly Highgate Hotels: Highgate is a leading real estate investment and hospitality management company with over $15 billion of assets under management and a global portfolio of more than 400 hotels spanning North America, Europe, the Caribbean, and Latin America. With a 30-year track record as an innovator in the hospitality industry, this forward-thinking company provides expert guidance through all stages of the property cycle, from planning and development through recapitalization or disposition. Highgate continues to demonstrate success in developing a diverse portfolio of bespoke lifestyle hotel brands, legacy brands, and independent hotels and resorts, featuring contemporary programming and digital acumen. The company utilizes industry-leading revenue management tools that efficiently identify and predict evolving market dynamics to drive outperformance and maximize asset value. With an executive team of seasoned hospitality leaders and corporate offices worldwide, Highgate is a trusted partner for top ownership groups and major hotel brands. _ Location: Homewood Suites Rochester 2095 Hylan Dr.Rochester, NY 14623 Responsibilities: • Assist with the operation maintenance and repair of equipment., • Change out light bulbs; perform preventative maintenance for guest rooms to include: vinyl repair touch up paint minor furniture repair tub caulking tile repairs etc., • Perform preventative maintenance for ice machines refrigerators kitchen equipment laundry equipment HVAC guestrooms meeting rooms the swimming pool and hot tub., • Perform plumbing repair laundry equipment repair preventative maintenance on all exhaust fans and supply; monitor energy conservation; repair vacuum cleaners and any other small equipment upon request., • Immediately follow up on any alarms to determine the exact location and cause - determine emergency status and report to the Front Desk with findings., • Perform other tasks/jobs as assigned by the supervisor or manager., • Weekend Availability required. Qualifications:, • Experience in a hotel or a related field preferred., • High School diploma or equivalent required., • Licensed in a trade preferred (plumbing electrical HVAC carpentry etc.)., • Must have a valid driver’s license for the applicable state., • Must have an acceptable MVR (Motor Vehicle Driving Record) property specific. Benefits • In addition to travel discounts at our hotels, Highgate offers competitive benefits, including three pricing tiers of medical coverage, as well as Dental and Vision benefits to eligible full-time associates. Paid time off plans may also be available to associates who qualify. The Retirement 401(k) Program is open to both full-time and part-time associates who qualify.

Company: Gerber Collision & Glass Built with Intent. Driven by YOU. At the Gerber Collision & Glass, our teams work to provide the elite infrastructure and supportive environment you need to Be the Best and outperform at every touchpoint in collision and glass services. As we continue to grow and lead the industry, we ensure you have the resources and the team behind you to move your career forward. Ready to grow with a team that’s built for your success? Apply today. Our Commitment: The Boyd Group welcomes unique talents from all backgrounds and characteristics. We act with integrity and appreciate the diverse perspectives that make our "Greater Team" exceptional. Qualified individuals, including those with disabilities and Protected Veterans, are encouraged to apply. Job Description: The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times. Key Job Responsibilities Ensure consistent execution of WOW (Wow Operating Way) plan. Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle. Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible. Realigns car chassis and frames to repair structural damage. Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed. Replaces or repairs interior parts as needed. Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent. Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair. Performs other related duties as assigned. Education and/or Experience Required High school diploma or equivalent required. Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer. Required Skills/Abilities Ability to read job orders and work with very little supervision. Ability to work with other repairers within an auto body shop. Thorough understanding of methods and procedures to repair vehicle bodies. Thorough understanding of how to use tools required for the trade. Other Requirements Must be able to work safely in a noisy area with many odors present. Must be able to lift up to 30 pounds at times. Must be able to visually inspect vehicle damage in a variety of weather conditions. Must be able to bend, stretch, kneel, and squat to perform repairs and inspections. Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job. Benefits That Drive Your Success Gerber offers the comprehensive benefits you expect from an industry leader, including: Annual Paid Time Off (PTO) plans 2 weeks of Paid Parental Leave for Full time Employees who work a minimum of 30 hours per week 6 paid holidays annually Medical, Prescription Drug, Dental & Vision Insurance effective Day 1 401(k) Retirement Plan with company match Employer Paid Short-Term Disability & Life Insurance Additional Voluntary Life Insurance Continuing Education Opportunities Free Prescription or Non-Prescription Safety Glasses annually Annual Voluntary Uniform Stipend Voluntary Daily Pay option available About Us Gerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit _ to learn more about our company. AI Disclosure Statement: At The Boyd Group and all affiliated companies, we do not use artificial intelligence (AI) or automated tools to screen, assess, or select applicants for employment. All hiring decisions are made by real people who review each application individually. Compensation Details: FLAT RATE Estimated $65,000 – $125,000+ per year Compensation is commensurate with skill, education, and experience. Sign-on bonus opportunities available for qualified candidates.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Master Level Mobile Diesel Technician to support our Truck Fleet in Rochester, NY Call or text “Rochester” to Jordon @ 904-869-3454 for more details Hear it from a Torque Mobile Mechanic Technician Here: https://RyderCareers.Video/TorqueMMT • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Schedule: Monday - Friday, • Hours: First Shift 7:00 am – 4:00pm, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided, • Bonus eligible based on performance., • Grow with Ryder: This position provides additional training to level up. Apply Here with Ryder Today Spots are filling fast — apply now to secure your spot. Call or text “Rochester” to Jordon @ 904-869-3454 for more details We want the right Maintenance Repair Mechanic Technician to join us at Ryder manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development, • Employee & Customer Referral Bonus program Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer., • Act as a mentor for the SM II level. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 month ago (4/28/2026 4:48 PM) Requisition ID 2026-200656 Location (Posting Location) : State/Province NY Location (Posting Location) : City ROCHESTER Location (Posting Location) : Postal Code 14606 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

Position Description Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Diesel Technician to support our Truck Fleet in Rochester, NY Hear it from a Torque Mobile Mechanic Technician Here: https://RyderCareers.Video/TorqueMMT • Technician Positions Pay Each Week, • Hourly Pay: $43.00 per hour based on experience, • Retention Bonus: $2000 paid every quarter within the first year., • Schedule: Flexible 40-hour work week (weekend premiums apply), • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided, • Grow with Ryder: This position provides additional training to level up. We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks. Spots are filling fast — click apply now to secure your spot. Questions? Call Jordon or text “Rochester” to 904-869-3454 to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • 80 hours PTO your first year, starting Day 1, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Build your skills - paid training, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Four (4) years or more Relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair, • Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support, • Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable, • Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Instructs and advises other technicians regarding maintenance repair procedures and diagnostics, • Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 week ago (5/22/2026 9:16 AM) Requisition ID 2026-202411 Location (Posting Location) : State/Province NY Location (Posting Location) : City ROCHESTER Location (Posting Location) : Postal Code 14606 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001374 Min Pay USD $43.00/Hr. Max Pay USD $43.00/Hr.

Position Description Torque by Ryder is immediately hiring a Permanent Full-Time Master Level Mobile Diesel Technician to support our Truck Fleet in Rochester, NY Hear it from a Torque Mobile Mechanic Technician Here: https://RyderCareers.Video/TorqueMMT • Technician Positions Pay Each Week, • Hourly Pay: $41.00 per hour, • Schedule: Monday - Friday, • Hours: First Shift 7:00 am – 4:00 pm, • Fuel Card and Company Cell Phone provided, • For mobile technicians, work site service vehicle will be provided, • Bonus is eligible based on performance., • Grow with Ryder: This position provides additional training to level up. Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call Jordon or text Rochester to 904-869-3454 to speak with your recruiter today. We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks. At Ryder, we offer outstanding benefits: • Generous Paid Time Off, • Medical, Dental and Vision Insurance effective 30 days from hire date, • Life Insurance and Disability Insurance Options, • 401K Savings Plan with Ryder matching contributions, • Discount on purchase of Ryder Common Stock, • Employee Discounts on Automotive, Mobile plans, Travel and Hotels, • Accredited Tech School Tuition Reimbursement, • PPE & Uniforms provided at no cost, • Paid Job training and development, • Employee & Customer Referral Bonus program Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools required, • Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, • Diagnostics and repairs, including AC, electrical systems, • Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs, • Three (3) years or more relevant work experience, preferred, • NonCommercial Driver License CLASS E, preferred, • Valid Commercial Driver License (CDL) CLASS A, preferred, • Other State driver's license, as required, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must be able to drive Ryder vehicles, • Ability to:, • Understand and adhere to Company policies in all areas, • Complete repair orders with the Company established systems, • Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Work independently and as a member of a team, • Prioritize workload, • Proven hands-on mechanic, customer service, and account management skills, • Demonstrates customer service skills, • Strong relationship management skills, • Strong verbal and written communication skills, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Preventive Maintenance (PM230&PM298) within 90 Days, • Brakes-Air (BA220&BA298) within 90 Days, • Brake mechanics/inspectors FMCS 396.25, • Hydraulic Brake (BH220&BH298) where appropriate within 90 Days, • Tire & Wheel TW220 within 90 Days, • CF609 & A/C trained and qualified (AC220&AC298) within 180 Days, • HD electrical - DR208 within 90 Days, • Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days, • Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix), • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer., • Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction., • Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc, • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Performs other duties as assigned., • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements., • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer., • Act as a mentor for the SM II level. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 1 week ago (5/22/2026 9:09 AM) Requisition ID 2026-202409 Location (Posting Location) : State/Province NY Location (Posting Location) : City ROCHESTER Location (Posting Location) : Postal Code 14606 Category Technicians/Service Employees9 Employment Type Regular-Full time Travel Requirements Greater than 60% Position Code 1001311 Min Pay USD $38.00/Hr. Max Pay USD $38.00/Hr.

ALOIS Healthcare is seeking a travel nurse RN PCU - Progressive Care Unit for a travel nursing job in Rochester, New York. Job Description & Requirements • Specialty: PCU - Progressive Care Unit, • Discipline: RN, • Start Date: 07/07/2026, • Duration: 13 weeks, • 48 hours per week, • Shift: 12 hours, nights, • Employment Type: Travel Much of the work they do centers on assessing and tracking changes in patients' conditions and reporting this information to the doctor heading the treatment team. They also frequently change dressings, provide wound care and perform minor bedside procedures, such as IV or catheterization. ALOIS Healthcare Job ID #18401301. Pay package is based on 12 hour shifts and 48.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN PCU About ALOIS Healthcare Why ALOIS Healthcare? ALOIS means “brave warrior” and that’s what you are- Warrior in Scrubs! Just as you advocate for your patients, we will advocate for you. The pay you deserve. The support you need. We’re in your corner for every battle – because you shouldn’t settle for anything less when it comes to your career. We offer: · Industry-leading pay • Generous cost of living and housing stipends · Opportunities for referral, sign-on, and extension bonuses · Weekly health insurance or health insurance Marketplace weekly bonus · Continuing education credits We’re proud to be recognized globally as a certified minority-owned staffing supplier. At ALOIS Healthcare: · Everyone Matters · We are Performance Driven · We are Open, Honest and Direct · We are Transparent · We are Inclusive · We Do the Right Thing We care about you - and your success is our success.

ALOIS Healthcare is seeking a travel nurse RN OR - Operating Room for a travel nursing job in Rochester, New York. Job Description & Requirements • Specialty: OR - Operating Room, • Discipline: RN, • Start Date: 06/01/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel Operating room nurses provide direct and individualized nursing care to patients based on best-in-class operating procedures, nursing disciplines, and patient safety protocols. They coordinate and consult with other healthcare professionals to assess, plan, implement and evaluate both minor and major operations. ALOIS Healthcare Job ID #18204700. Pay package is based on 10 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN OR About ALOIS Healthcare Why ALOIS Healthcare? ALOIS means “brave warrior” and that’s what you are- Warrior in Scrubs! Just as you advocate for your patients, we will advocate for you. The pay you deserve. The support you need. We’re in your corner for every battle – because you shouldn’t settle for anything less when it comes to your career. We offer: · Industry-leading pay • Generous cost of living and housing stipends · Opportunities for referral, sign-on, and extension bonuses · Weekly health insurance or health insurance Marketplace weekly bonus · Continuing education credits We’re proud to be recognized globally as a certified minority-owned staffing supplier. At ALOIS Healthcare: · Everyone Matters · We are Performance Driven · We are Open, Honest and Direct · We are Transparent · We are Inclusive · We Do the Right Thing We care about you - and your success is our success.

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $35-$42/hr, • Sign on Bonus: Up to $3,000.00 DOE, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: · Ability to report to work in a timely manner as scheduled by supervisor. · Repair and overhaul equipment such as compressors, water pumps, air handlers, electrical and mechanical control devices and other similar machinery. · Test malfunctioning systems and components using electrical and/or mechanical skills. · Maintain legible corporate and personal records of work history. · Provide general repair work on refrigeration, heating and ventilation equipment such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors. · Provide preventative maintenance activities; diagnose equipment malfunctions and operating efficiency of mechanical equipment. · Perform work on minor construction and remodeling projects including startups of new installations. · Embodies the CoolSys CARES culture (Collaboration, Accountability, Respect, Empowerment, Safety). · Performs other duties as assigned. Qualifications: Education / Training · High school diploma or GED, equivalent work experience and trade or technical school classes. · Valid EPA certificate. Work Experience / Skills · 3-5 year's experience in commercial HVAC, refrigeration, and electrical required. · Basic knowledge of refrigeration, HVAC, ice machines, gas furnaces, and electrical. · Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus. · Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful. · Knowlege of the components in a single-phase compressor and single-phase motor control circuit. · Ability to use an ohmmeter. · Ability to verify a capacitor is in good standing. · Ability to demonstrate an understanding of defrost circuits. · Knowledge of schematic and wiring diagram. · Ability to identify/explain function of refrigeration components. · Ability to properly leak check a single-compressor system. · Ability to demonstrate proper PPE and safety equipment. · Ability to set up LPC as the primary temperature control and as a pump down safety control. · Ability to demonstrate how to determine superheat and how to set expansion valve superheat. · Ability to verify a defrost termination is functional. · Ability to demonstrate the proper tasks for performing preventative maintenance on HVAC systems. · Ability and knowledge of the functions and safety precautions of the components of a gas furnace system. · Ability to properly recover refrigerant from a refrigeration system. · Ability to change oil in a vacuum pump. · Ability to demonstrate how to properly hook up a gauge set for evacuation. · Knowledge of reporting procedure for a large refrigerant release. · Knowledge of level 2 experience/information. · Must be able to lift up to 60 lbs. with no assistance and be able to sit and/or stand for several hours at a time. · Valid driver’s license. · Good driving record. · Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. · Ability to use typical business tools including E-Mail, Word, Excel, etc. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on and . CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Job Description Job purpose To setup and run the Sodick Wire EDMs all the while maintaining part quality and production efficiencies. Duties and responsibilities • Setup, operate and debug Sodick Wire EDMs., • Make machine tool offsets as needed to maintain part quality., • Make minor program changes to M & G code as needed., • Identifies signs of tool wear and then makes the appropriate process or tool change(s)., • Reads process sheets and mechanical drawings with the understanding of GD&T., • Works on multiple machines and performs multiple tasks throughout the day., • Uses general measuring instruments such as; indicators, micrometers, calipers, optical comparators, gage blocks, rules, protractor and height gages., • Enters inspection data into a computer software program., • Performs basic machine maintenance such as changing fluids and filters., • Maintains a clean work environment and machine work area., • Follows company written policy and documented procedures., • Performs other duties as assigned. Qualifications • Minimum 3-5 years of experience setting up and running EDMs or minimum 3-5 years of experience setting up and running CNC Lathes and Mills or Technical Training College with the focus of study being CNC setups and operation., • Ability to read blue prints and knowledge of GD&T a must., • Knowledge of Esprit programs with understanding of cutting parameters., • An understanding of both the Metric and English measuring systems a must., • Ability to use a variety of measuring equipment., • High School Diploma or Technical Training Certificate. Working conditions • Standard work week is Monday through Friday on B-Shift., • Working in production environment., • Required exposure to industrial oils, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Requirement for some independent actions and/or decisions is expected., • Required to work in a non-air-conditioned setting., • Some repetitive motion required on occasion. Physical requirements • Required daily: periodic lifting of materials and parts weighing up to 70 lbs., • Required intermittent long periods sitting and standing. Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran #ROC B Shift: Mon-Thurs: 2:45pm-12:15am Fri: 2:45pm-6:45pm

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SCHEDULE: 12 hour rotating shifts on a 2-2-3 schedule SUMMARY: Extrusion Operator 3 is responsible for safely and effectively contributing to teams of 4-5 individuals supporting the operation of extrusion lamination manufacturing equipment. Maintaining a strong work ethic while demonstrating good communication skills are important to exceeding customer expectations, productivity standards, and personal career growth. An Extrusion Operator 3 is expected to be able to independently prioritize their time and duties to contribute to the team running efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Performs duties in a manner that adheres to safety policies and procedures., • Participate in the training curriculum, learning new aspects of extrusion line operations while completing assigned duties required for operation., • Maintain quality standards by reviewing product specifications and ensuring thorough completion of assigned production paperwork., • Operate as a member of a larger team responsible for aspect of overall process. Team members will rely on attention to detail and proper communication to ensure entirety of process is safe and efficient., • Exercise cautious approach to heavy equipment including use over overhead hoists., • Completes tasks to ensure area around the machine is clean to GMP & Food Safety standards, • Visual acuity for identifying minor imperfections and material defects., • Basic understanding of general tool usage including tape measurers, utility knives and screw drivers., • Good communication skills, both verbal and written with working knowledge of Microsoft Office.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); and one to three years related manufacturing experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions and short correspondences. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to peers and supervisors within the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to read/use a tape measurer and apply concepts of basic algebra. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to reach out for assistance and communicate if instructions or assignments are not clear. Ability to retain information and apply to future situations of similar manner. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: An Extrusion Utility Operator is responsible for safely and effectively contributing to team a of 4-5 individuals supporting the operation of extrusion lamination manufacturing equipment. Maintaining a strong work ethic while demonstrating good communication skills are important to exceeding customer expectations, productivity standards, and personal career growth. Extrusion Utility Operators are expected to be able to independently prioritize their time and duties to contribute to the team running efficiently. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Performs duties in a manner that adheres to safety policies and procedures., • Participate in the training curriculum, learning new aspects of extrusion line operations while completing assigned duties required for operation., • Maintain quality standards by reviewing product specifications and ensuring thorough completion of assigned production paperwork., • Operate as a member of a larger team responsible for aspect of overall process. Team members will rely on attention to detail and proper communication to ensure entirety of process is safe and efficient., • Exercise cautious approach to heavy equipment including use over overhead hoists., • Completes tasks to ensure area around the machine is clean to GMP & Food Safety standards, • Visual acuity for identifying minor imperfections and material defects., • Basic understanding of general tool usage including tape measurers, utility knives and screw drivers., • Good communication skills, both verbal and written with working knowledge of Microsoft Office.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); and one to three years related manufacturing experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions and short correspondences. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to peers and supervisors within the organization. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS Ability to read/use a tape measurer and apply concepts of basic algebra. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to reach out for assistance and communicate if instructions or assignments are not clear. Ability to retain information and apply to future situations of similar manner. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SCHEDULE: Rotating 12 hour shifts on a 2-2-3 schedule SUMMARY: Slits printed rolls from the press or Extruder to individual rolls as per customer specifications. Material being slit is inspected for quality/defects and finished rolls are palletized for shipment to the customer. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Facilitate on the job training and instruction for team members on the correct use of tools and equipment to ensure proper safety and operating procedures are followed., • Reads job specifications to determine machine adjustments and material requirements., • Sets up machine., • Uses lowboy to mount full rolls onto machine., • Observes machine operation to detect material defects or machine malfunction., • Measures material dimensions to determine accuracy of machine operation., • Performs minor machine maintenance such as oiling/greasing machines and changing female knives., • Prepares required paperwork, including daily production reports, SPC charting, roll tickets and inventory tags., • Completes work orders when necessary., • Actively participates in safety programs and makes safety observations. Follows plant safety rules., • Other duties as assigned.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms and talk or hear. The employee is occasionally required to walk and stoop, kneel, crouch, or crawl. This position may require manual lifting not to exceed 50 lbs – reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to humid conditions, airborne particles, and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: talentacquisition@americanpackaging.com.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! shift schedule: 12 Hour Nights: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. Shift Differential of $2 per hour for night shift. job purpose: The Filler Operator is responsible for filling containers of all products supplied by the processing department, beginning with the sterile preparation of raw materials through the blow molder to inspection equipment beyond the capper. This position is expected to maintain the integrity and sterilization of all packaged products throughout the associated equipment. The individual will complete the required routine documentation and ensure legal parameters are complied with. They will perform product testing and evaluation protocols as outlined by Packaging, Quality, and Maintenance department requirements. The Filler Operator also cleans the machines according to food processing standards, troubleshoots issues, performs minor repairs or adjustments, and clears any jams that may occur during production. responsibilities: • Follow all safety, working, and Good Manufacturing Practice (GMP) rules., • Report to and follow the directions of Production Supervisors., • Demonstrate the ability to safely operate moving equipment and make the appropriate adjustments within process limits in order to package accurate and defect-free full bottles., • Observe machine operations to ensure quality conformity to specifications and standard operating procedures for all packaged products moving on to the next equipment center., • Weigh and inspect filled, capped bottles routinely to verify specifications are met throughout production runs. Work with the Quality Assurance department to confirm the product complies with all requirements for the duration of runtime., • Communicate with material handlers to supply filling equipment with the required production materials or cleaning agents., • Count and record finished or rejected packaged items., • Clean (CIP) and/or sterilize (SOP) the blow molder, filler, capper, coder, inspection units, and surrounding areas. Maintain the entire filling room in audit ready condition both during and after production., • Proactively monitor the production line, inspection equipment, and surrounding conveyors to watch for any problems including backups, jams, or rejects. Efficiently resolve stoppages and continue production in a timely manner while recording all downtime reasons., • Stop and troubleshoot machines when faults occur, clear machine jams, then report malfunctions to the appropriate supervisor and/or technician., • Oil properly, troubleshoot problems, perform minor repairs using the correct tools, and participate in Preventive Maintenance on the filling equipment., • Aid in the training of new personnel or upskilling of team members., • Perform other duties as assigned by management. skills/qualifications required: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Basic computational skills including simple math and reasoning required., • Must be able to operate the equipment effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment, • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. certificates, licenses, registrations: • HMI (human machine interface) devices and process trending are needed for the position., • Filler operating experience, preferably with aseptic bottling, is required. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Filler Operator stands throughout their shift, walks on uneven concrete and tile surfaces, and could lift up to 50 pounds at once., • Pushing/Pulling/Bending/Stooping – The Filler Operator pushes/pulls wheeled carts, material containers, and product samples for testing. The Filler Operator pushes/pulls while using brooms, dust mops, and brushes during cleanup duties. The Filler Operator bends/stoops occasionally throughout the workday for varying lengths of time., • Squatting/Kneeling/Crawling/Twisting/Turning – The Filler Operator may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist when testing product, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Filler Operator steps on and off equipment platforms and climbs stairs to access equipment. The Filler Operator reaches below and/or above shoulder level when removing or adding boxes to a pallet and dumping materials into a hopper., • Grasping/Manipulation – The Filler Operator will engage in frequent use of hands and fingers for pressing buttons, opening equipment doors, typing on a keyboard, clearing jams, executing changeovers, and performing quality checks. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of an absence, another employee with the same skill level will assume the duties and responsibilities as required. how fairlife nourishes you: At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential, • Rewards & recognition, matching gifts, free product, and Business Resource Groups fairlife's nour!sh program is designed to meet you where you are — supporting your individual wellbeing journey while enabling you to do your best work every day. position location: Webster, NY reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is bonus eligible. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$29—$29 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! shift schedule: 12 Hour Days: This is a day shift position, with hours from 6:00 AM to 6:00 PM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. job purpose: The Filler Operator is responsible for filling containers of all products supplied by the processing department, beginning with the sterile preparation of raw materials through the blow molder to inspection equipment beyond the capper. This position is expected to maintain the integrity and sterilization of all packaged products throughout the associated equipment. The individual will complete the required routine documentation and ensure legal parameters are complied with. They will perform product testing and evaluation protocols as outlined by Packaging, Quality, and Maintenance department requirements. The Filler Operator also cleans the machines according to food processing standards, troubleshoots issues, performs minor repairs or adjustments, and clears any jams that may occur during production. responsibilities: • Follow all safety, working, and Good Manufacturing Practice (GMP) rules., • Report to and follow the directions of Production Supervisors., • Demonstrate the ability to safely operate moving equipment and make the appropriate adjustments within process limits in order to package accurate and defect-free full bottles., • Observe machine operations to ensure quality conformity to specifications and standard operating procedures for all packaged products moving on to the next equipment center., • Weigh and inspect filled, capped bottles routinely to verify specifications are met throughout production runs. Work with the Quality Assurance department to confirm the product complies with all requirements for the duration of runtime., • Communicate with material handlers to supply filling equipment with the required production materials or cleaning agents., • Count and record finished or rejected packaged items., • Clean (CIP) and/or sterilize (SOP) the blow molder, filler, capper, coder, inspection units, and surrounding areas. Maintain the entire filling room in audit ready condition both during and after production., • Proactively monitor the production line, inspection equipment, and surrounding conveyors to watch for any problems including backups, jams, or rejects. Efficiently resolve stoppages and continue production in a timely manner while recording all downtime reasons., • Stop and troubleshoot machines when faults occur, clear machine jams, then report malfunctions to the appropriate supervisor and/or technician., • Oil properly, troubleshoot problems, perform minor repairs using the correct tools, and participate in Preventive Maintenance on the filling equipment., • Aid in the training of new personnel or upskilling of team members., • Perform other duties as assigned by management. skills/qualifications required: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Basic computational skills including simple math and reasoning required., • Must be able to operate the equipment effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment, • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. certificates, licenses, registrations: • HMI (human machine interface) devices and process trending are needed for the position., • Filler operating experience, preferably with aseptic bottling, is required. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Filler Operator stands throughout their shift, walks on uneven concrete and tile surfaces, and could lift up to 50 pounds at once., • Pushing/Pulling/Bending/Stooping – The Filler Operator pushes/pulls wheeled carts, material containers, and product samples for testing. The Filler Operator pushes/pulls while using brooms, dust mops, and brushes during cleanup duties. The Filler Operator bends/stoops occasionally throughout the workday for varying lengths of time., • Squatting/Kneeling/Crawling/Twisting/Turning – The Filler Operator may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist when testing product, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Filler Operator steps on and off equipment platforms and climbs stairs to access equipment. The Filler Operator reaches below and/or above shoulder level when removing or adding boxes to a pallet and dumping materials into a hopper., • Grasping/Manipulation – The Filler Operator will engage in frequent use of hands and fingers for pressing buttons, opening equipment doors, typing on a keyboard, clearing jams, executing changeovers, and performing quality checks. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of an absence, another employee with the same skill level will assume the duties and responsibilities as required. how fairlife nourishes you: At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential, • Rewards & recognition, matching gifts, free product, and Business Resource Groups fairlife's nour!sh program is designed to meet you where you are — supporting your individual wellbeing journey while enabling you to do your best work every day. position location: Webster, NY reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is bonus eligible. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$29—$29 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job Description Scope The Licensed Practical Nurse (LPN) at the Quatela Center for Plastic Surgery is responsible for performing clinical duties and assisting or setting up minor procedures for the clinical practice. Position Summary LPN is responsible for assisting in the care of both facial and body plastic postoperative clients. This is a fulltime position that requires approximately 90% of time standing/walking and about 10% of time sitting. No heavy lifting is involved. Qualifications • LPN Licensure from accredited school of nursing, • CPR certified, • More than 2 years’ experience as a LPN in the field of medicine., • Work Experience with Dermatology and / or Plastic Surgery is a plus but not mandatory, • Experience and use of electronic medical records, • Understands proper way to educate clients, assess learning response., • Ability to assess client and identify medical needs/concerns and the ability to communicate this to supervisory MD or NP provider., • Ability to triage patients., • Knowledge and ability to remove sutures, drains, dressings with thorough physical assessment skills. (Applicant will be trained on proper technique with our patient population), • Ability to identify infection or hematoma, • Training in basic clinical/medical procedures., • Basic computer operating knowledge-Microsoft word and Excel, • Basic knowledge of working with camera/downloading info into computer. (Will receive training), • Ability to work with and maintain confidential patient information., • Ability to communicate effectively with all levels of staff, patients, and clients., • Ability to follow precise direction, instructions, and system protocols., • Ability to provide friendly, timely service to all patients and/or clients with questions or concerns., • Ability to take direction and follow through on assignments and responsibilities. Duties and Responsibilities • Assist physician, NP and RN in seeing post-op, follow-up, and new patients., • Remove sutures, change dressings, remove JP drains, remove staples., • Set-up and assist with minor procedures, collect specimens, • Take new patient photos and enter demographics into database, • Ability to use Nextech for making appointments, checking on appointments, adding notes and in general good understanding of all Nextech functioning., • Return patient phone calls with answers to inquiries for any reason, • Full understanding of all injectables and ability to teach clients about these products., • Clean and sterilize instruments during clinical day along with other team members. Clean rooms at end of clinical day as needed with other team members. Launder robes and garments as needed for Clinic. Benefits • Medical Insurance, • Dental Insurance, • Vision Insurance, • FSA- Flexible Spending Account, • HSA – Health Savings Account, • Life Insurance – Employer paid- 1.5x annual pay, • Paid Family Leave, • 3-Weeks Paid Vacation annually, • 401k Safe Harbor Plan (after 60 days), • 10 paid Holidays, • Employee Discounts, • Work Anniversary Milestones- Employee Bonus -1 year/5 year/15 year/20 year/25 year All duties and responsibilities stated are essential job functions. Staff members may be required to perform additional job-related duties as assigned by management. It is the policy of Vito Quatela, MD, PLLC to provide equal employment opportunities without regard to race, color, religion, sex, national origin, genetic information or any other protected characteristic under applicable law.

Job Description Job description: • Assist with the care of patients in a solo-private family medicine office, • Rooming patients: obtain vital signs, reconcile medication list, assist with form completion, have patient change as needed, time efficiency to ensure proper flow of office session, • Medication refill: confirm dosage/route of administration/frequency, assist with refill preparation, assist with prior authorizations, • Routine point-of-care testing: urine dip, urine pregnancy, Rapid strep, etc., • Outpatient office procedures: EKG, dressing changes, immunizations, intramuscular injections, allergy injections, phlebotomy, • Set up for minor office procedures including lesion excisions, joint injections, etc; sterilize surgical equipment in autoclave, • Accurate submission of patient samples to lab, • Assist with triaging patient calls and coordination of same-day appointments, • Maintain vaccine supply: both private supply and Vaccine For Children (VFC) supply, monitor refrigerator/freezer temperature/logs, • Maintain exam rooms: keep supplies stocked, remove expired items, turn over/clean exam rooms after each patient visit, • Patient communication: relay messages between patient and physician regarding questions related to care, refills, etc., utilize the EMR for documentation of all patient care, • Maintain knowledge of medications commonly used in scope of family medicine practice, • Experience with EMRs, • Type 40 WPM minimum, • Proficiency with Microsoft Word, Excel, • Proficiency with utilizing online websites for ordering medical supplies, etc., • High level of professionalism including maintaining strict patient confidentiality, • Superb accuracy, precision and integrity, • Active LPN license required, • Active CPR/BLS certification Job Type: Part-time Benefits: • 401(k) matching, • Health insurance, • Paid time off License/Certification: • LPN license (Preferred)

Job DescriptionDescription: Position Summary Operates computer numerically controlled (CNC) lathes and/or mills to machine metallic and nonmetallic workpieces to satisfy requirements of released traveler packet. Operates machining centers on repetitive production involving skill and dexterity. Attention is required to prevent damage to product or damage to the machine center. Makes minor but necessary machine adjustments to ensure satisfactory production. Inspect works for dimensional integrity and obvious defects. Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual serving in this capacity shall be consistently able to: • Run jobs of minimal complexity on any CNC Machinery. Level of assistance while training varies with part and/or process., • Ability to read and understand traveler packet, including print and other specifications, for all applicable requirements such as dimensions and tolerances, tooling instructions, gauging and cutting instruments., • Position and secure tools in holders, lift workpieces manually or with a hoist and secure workpiece in chuck or appropriate fixture., • Start machine or initiate software program and engage feed. Direct coolant flow toward tool and work piece., • Observe material removal step(s) to detect excessive wear or malfunction., • Verify conformance of machined work pieces to specification tolerances., • Plot dimensional data on control charts or inputs information to SPC/Datamyte system if required. Initiate proper procedural action if control chart warning limits are identified or out-of-tolerance conditions are experienced., • Complete job-related paperwork accurately and completely, which includes expedite sheets, move tags and job cards, machine preventive maintenance., • Understand basic Vantage operation for time reporting., • Understand how to use elementary statistical tools., • Other duties may be assigned by supervisor., • Follow company policies and values. Supervisory Responsibilities This position has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED); and six to twelve months related experience and/or training or equivalent combination of education and experience. Competencies To perform the job successfully, an individual should demonstrate the following competencies: • Problem Solving - Works well in group problem solving situations., • Technical Skills - Pursues training and development opportunities., • Customer Service - Responds promptly to customer needs; Responds to requests for service and assistance., • Interpersonal Skills - Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Demonstrates group presentation skills; Participates in meetings., • Written Communication - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information., • Teamwork - Exhibits objectivity and openness to others' views; Gives and welcomes feedback., • Leadership - Accepts feedback from others., • Diversity - Shows respect and sensitivity for cultural differences., • Ethics - Treats people with respect; Works with integrity and ethically; Upholds organizational values., • Organizational Support - Follows policies and procedures; Supports organization's goals and values., • Motivation - Measures self against standard of excellence., • Planning/Organizing - Uses time efficiently., • Professionalism - Approaches others in a tactful manner; Treats others with respect and consideration regardless if their status or position; Accepts responsibility for own actions., • Quality - Applies feedback to improve performance; Monitors own work to ensure quality., • Quantity - Meets productivity standards; Completes work in timely manner., • Safety and Security - Observes safety and security procedures; Uses equipment and materials properly., • Adaptability - Adapts to changes in the work environment., • Attendance/Punctuality - Is consistently at work and on time; Arrives at meetings and appointments on time., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions. Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others! PGM is an EOE Employer

Job DescriptionDescription: This is a B-Shift Position starting at 4:00 PM and includes a 10% premium on base rate Please apply on our website www.pgmcorp.com Position Summary Operates CNC (Computer Numerically Controlled) lathes and/or mills to machine metallic and nonmetallic workpieces to produce precision machined parts at acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damaged product or damage to machine center. Making necessary minor machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: This is a B-Shift Position starting at 4:00 PM and includes a 10% premium on base rate • Operate CNC mills and/or lathes, running new and existing production jobs of moderate complexity without assistance unless unusual problems occur. Must be able to make minor adjustments when necessary., • Monitor perishable tooling inventory for each assigned job., • Perform all required inspection duties to maintain acceptable quality levels., • Inform supervisor of any problems associated with equipment, processes or procedures and offer ideas or possible solutions., • Complete job-related paperwork accurately and completely which includes: expedite sheets, move tickets, and job cards., • Perform routine preventative maintenance, as required, including but not limited to daily preventative machine maintenance logs., • Analyzes blueprint and specifications manual for requirements such as dimensions and tolerances, tooling instructions on fixturing, gauging, print rev. level, and cutting instruments., • Computes unspecified dimensions and necessary machine settings as required by the work order., • Positions and secures tools in holders, lifts work piece manually or with hoist, and secures work piece in chuck or appropriate fixture., • Starts machine, turns or initiates software program and engages feed. Directs coolant flow to tool and work piece., • Observes material removal step(s) to verify process integrity and detect excessive wear or malfunction., • Verifies conformance of machined work pieces to specification tolerances., • Plots dimensional data on control charts and collects SPC Data. Initiates proper procedural action if control chart warning limits are identified or out-of-tolerance conditions are experienced., • Basic and Advanced Vantage training, • Follow company policies as outlined in the employee handbook and values, • Other duties may be assigned. Supervisory Responsibilities This job has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED); and one to five years related experience and/or training or equivalent combination of education and experience. Internal Training Requirements • Company Practices & Policies, • Lock Out/Tag Out Video, • Company Benefits Orientation, • Personal Protection Equipment, • Mission, Vision & Values Training, • Right-to-Know Training, • Values Based Leadership, • Traveler Sign-Off, • Bloodborne Pathogen, • Hazardous Communication, • Fire Extinguisher Safety This is a B-Shift Position starting at 4:00 PM and includes a 10% premium on base rate

Job Description Center for Youth: Started BY YOUTH FOR YOUTH. We partner with youth to realize their full potential, by creating opportunities, removing barriers and promoting social justice. The Center ensures understanding and values differences in people of diverse cultures, ethnic origins, sexual orientation, disabilities and beliefs. Overview: The Counseling and Runaway and Homeless Youth (RHY) Department provides a continuum of essential services to the most vulnerable youth in our community, including two crisis nurseries, an emergency shelter, permanent and transitional housing, a food and clothing pantry, street outreach, and support for minor victims of commercial sexual exploitation. Schedule: Full time, 37.5 hours per week. Sunday-Thursday, 10 am-6 pm, with flexibility to accommodate client and family needs Location: Emergency Shelter Responsibilities: • Case management, • Assessments and service plans, • Crisis intervention, • Referrals and follow-up, • Aftercare, • Youth transportation, • Youth advocacy, • Maintenance of client confidentiality, • Support daily shelter activities (youth routines, supervision, meals, life skills recreations activities, etc.), • Maintenance of facility and grounds, • Partnership with youth & family counselor on youth case coordination Required Qualifications: • Bachelors Degree in Human Services OR Equivalent combination of experience and education, • Knowledge of youth asset development and risk reduction theory, and youth serving systems, community resources, partnerships and collaborations, • A valid Driver's license Skills: • Excellent verbal and written communication, • Positive youth development, • Knowledge of counseling approaches and techniques, • Group facilitation and training method skills, • Knowledge of community resources Pay Rate: $22.50- $24.50 per hour The Center for Youth Provides Equal Employment Opportunities

Job DescriptionWell-established urgent care clinic seeks BE/BC Family Practitioner near Rochester NY • Practice setting: Join 3 primary care physicians, 3 APP’s & an experienced support staff; on-site imaging, lab services & treatment tools, • Schedule: Flexible w/8 or 12-hour shifts available; no call required, shared weekend & holiday rotations; motivating admin team, • Duties: Care for minor injuries & illnesses such as sprains & cuts, colds & flu, minor burns, back pain & other ailments, • Compensation: Offer includes generous hourly salary, incentives, sign-on bonus, relo/vaca/CME, benefits, retirement & malpractice, • Community: Servicing 100K residents, enjoy a variety of school options, a vibrant lakefront downtown & easy access to Rochester & nearby cities For more details on this position & other we have available, email us at info@atlanticmedsearch.com or call (954) 344-0606

Job Description Monroe Tractor is a well-known and respected construction equipment and agricultural equipment dealer with over 70 years of experience servicing the northeastern US. With 18 locations throughout New York, Pennsylvania, Vermont, Connecticut, Rhode Island and Massachusetts, we pride ourselves on providing best-in-class sales and support to over 15,000 hardworking customers. Since our founding in 1951, the industries we serve have been transformed by the technologies, equipment, and capabilities undreamed of decades ago. But the people we serve haven't changed, and neither have we. We're still a family-owned business! We are seeking a knowledgeable and driven Product Support Specialist to serve as the subject matter expert for Wirtgen, Road Construction & Mining Machinery product lines. In this role, you will play a critical part in supporting our sales team and customers by delivering in-depth product knowledge, technical support, and application expertise. You will build and maintain strong customer relationships within your assigned territory to increase market share, drive equipment sales, and contribute to long-term company profitability. This position requires a deep understanding of road construction equipment, asphalt and concrete milling, paving, soil stabilization, and other heavy equipment applications. Territory: BUFFALO/ROCHESTER/SYRACUSE TERRITORIES Responsibilities • Increase market share and profitability for the stated range of products within the geographic area., • Develop relationships and network throughout the industry to monitor and participate in all product activities. Know the market; where future work will be done, where it is currently being done and by whom. Develop an open and "real time" channel of communication throughout the industry. Be recognized as a solutions provider and a wealth of expertise for our customers., • Create opportunities by evaluating customer fleets and techniques, and proactively propose better solutions, • Assist the Sales force with product demonstrations and technical presentations., • Deliver all new machines and provide onsite operation and maintenance training. Regularly follow up with customer's deliveries to insure they remain fully trained, well supported and highly satisfied with our products and services., • Communicate regularly with the store/branch managers and full line sales professionals to share information on activity within their regions., • Be a primary channel of communication for product technical and commercial issues with our manufacturing partners., • Be an active and highly visible participant in industry groups and events and keep abreast of competitive activity and competitive products., • Always seek additional parts and service opportunities for company and reporting those prospects to the appropriate parties., • Provide training for our customers and employees, which includes continual education on developments for our product line, as well as that of our competitors., • Assist customers with parts, service and repair requirements., • Coordinate delivery and pickup of equipment as needed by customer., • Follow all safety rules and regulations while performing work assignments and adhere to all policies and procedures as specified in company manuals and as directed in the employee handbook., • Proactively seek and participate in available company-sponsored training, in an effort to develop and advance knowledge base and skill set., • Participate in all company/location driven communication efforts, including open book meetings, huddles, department meetings and other related efforts., • Maintain a positive and professional working relationship with peers, management, and support resources, with a constant commitment to teamwork and exemplary customer service., • Perform all other duties as assigned by management in a professional and efficient manner. Qualifications: • Must be able to work independently, • Prior Heavy Highway Construction knowledge (Milling, Paving, etc.) required, • Possess basic mechanical skills for setups and minor repairs, • Prior sales experience and/or training required, • Good understanding of local market conditions, • Must have strong communication and interpersonal skills, • Excellent customer service skills, • Excellent computer skills Benefits • Medical, Dental & Vision Insurance, • Health Savings Account (Employer + Employee Contributions), • Accident & Disease Insurance, • 401K Plan + Match, • Competitive Paid time off Policy, • Short/Long Term Disability, • Annual Reviews Monroe Tractor is proud to be an Equal Opportunity Employer and values diversity in the workplace. We encourage candidates from all backgrounds to apply and join a team where your work makes a difference every day. Pay is commensurate with the applicant's experience, as it relates to the position. Pay Transparency$55,000—$65,000 USD

Job DescriptionDescription: Status:32 hrs./wk. 28 weeks, Aug - May Position Summary The Nurse Practitioner provides comprehensive primary and episodic healthcare to college students within a campus health center setting. This role emphasizes holistic, developmentally informed care for young adults and collaboration with counseling, wellness, and campus partners to support student success, retention, and well-being. The NP practices in accordance with state scope-of-practice regulations and evidence-based standards for college health, including guidance from the American College Health Association (ACHA). Essential Duties & Responsibilities Clinical Care • Provide primary care services to a diverse college student population, including assessment, diagnosis, and treatment of acute and chronic conditions., • Conduct health histories, physical exams, and preventive health screenings., • Diagnose and manage common illnesses and injuries (e.g., respiratory illness, infections, minor injuries, dermatologic concerns)., • Prescribe medications and treatments in accordance with state licensure., • Order and interpret laboratory tests, imaging, and diagnostic studies., • Assist with ensuring compliance with state and institutional immunization requirements, and administer immunizations (as applicable)., • Provide health education and counseling on nutrition, sleep, substance use, stress, and wellness. Care Coordination & Collaboration • Collaborate with counseling services, disability/accessibility services, athletics, residence life, and other campus partners to support student well-being (with appropriate consent)., • Refer students to specialists or community providers when indicated., • Participate in case consultation and interdisciplinary team meetings., • Assist in developing care plans for students with complex medical or mental health needs. Health Promotion & Prevention • Support campus health promotion initiatives and outreach events., • Contribute to public health efforts such as vaccination campaigns and other wellness programming., • Provide consultation for campus health concerns and emerging student needs. Documentation & Compliance • Maintain accurate, timely, and confidential electronic health records., • Ensure compliance with HIPAA, state regulations, and institutional policies., • Review and act upon student health history and immunization records., • Participate in quality improvement initiatives and accreditation processes as applicable. Administrative & Professional Responsibilities • Participate in staff meetings, training, and campus committees as appropriate., • Assist with development of clinical protocols and health center policies., • Assist with regular updates to the department’s policy and procedure manual for health services., • Maintain licensure, certification, and continuing education requirements., • Support training and supervision of student workers, interns, or graduate trainees as appropriate.The approved rate of pay is: $63.00/hr - $66.00/hrRequirements: Qualifications Required • Must hold an active New York State Nurse Practitioner license and practice in accordance with Section 6902(3)(b) of the New York Education Law., • Minimum 1–2 years of clinical experience in primary care, family medicine, urgent care, adolescent/young adult health, or college health (may consider strong new graduates)., • Demonstrated ability to work with diverse populations and emerging adults., • Strong interpersonal, communication, and collaborative skills. Preferred • Experience in college health, adolescent medicine, family practice, or community health., • Experience with electronic health records., • Interest in health promotion, mental health integration, and preventive care., • Experience working in interdisciplinary or educational settings. Work Schedule • Primarily Monday - Friday daytime hours, with an expectation of one evening clinic per week to support student access and campus needs., • Special event coverage as needed. Work Environment • Fast-paced outpatient college health center., • Frequent interaction with students, faculty, and campus partners., • Requires ability to maintain confidentiality and professional boundaries in a campus environment.

Job Description Job Summary The CNC Operator is responsible for operating CNC equipment within the Turning, Milling, or Swiss department while ensuring all parts meet quality and customer specifications. This role requires strong blueprint reading skills, in-process inspection capabilities, and the ability to make minor machine adjustments to maintain precision and efficiency. Compensation • $25 - $28 / hr, • 10% shift differential on 2nd, • Overtime: Unlimited available (including Saturdays) Shift • 1st Shift: 7:30 AM – 4:00 PM, • 2nd Shift (Priority): 3:45 PM – 12:30 AM Responsibilities • Read and interpret blueprints and technical drawings, • Perform in-process inspections using appropriate measuring tools (micrometers, calipers, gauges, etc.), • Make tool offset adjustments as needed to maintain part accuracy, • Follow company procedures for tagging, inspection, and documentation, • Ensure all tools and gages are properly calibrated and up to date, • Work closely with supervisors and the Quality team to ensure compliance with customer specifications, • Follow lean manufacturing practices and established shop procedures, • Maintain a clean, safe, and organized workstation, • Perform basic preventative maintenance on machines as required, • Adhere strictly to all safety policies and procedures, • Remain flexible to support overtime needs when required Requirements Qualifications • 1–3 years of CNC machining experience (Turning, Milling, or Swiss preferred), • Ability to perform accurate in-process inspection, • Basic understanding of CNC controls and tool offset adjustments, • Strong attention to detail and commitment to quality, • Ability to work independently and as part of a team, • Willingness to work overtime as needed Benefits Benefits • Overtime opportunities available, • Medical, dental, and vision insurance, • 401(k), • Paid time off and paid holidays

Job DescriptionDescription: Status: 32 hrs./wk. 28 weeks, Aug - May Position Summary The Physician Assistant provides comprehensive primary and episodic healthcare to college students within a campus health center setting. This role emphasizes holistic, developmentally informed care for young adults and collaboration with counseling, wellness, and campus partners to support student success, retention, and well-being. The PA practices in accordance with state scope-of-practice regulations and evidence-based standards for college health, including guidance from the American College Health Association (ACHA). Essential Duties & Responsibilities Clinical Care • Provide primary care services to a diverse college student population, including assessment, diagnosis, and treatment of acute and chronic conditions., • Conduct health histories, physical exams, and preventive health screenings., • Diagnose and manage common illnesses and injuries (e.g., respiratory illness, infections, minor injuries, dermatologic concerns)., • Prescribe medications and treatments in accordance with state licensure., • Order and interpret laboratory tests, imaging, and diagnostic studies., • Assist with ensuring compliance with state and institutional immunization requirements, and administer immunizations (as applicable)., • Provide health education and counseling on nutrition, sleep, substance use, stress, and wellness. Care Coordination & Collaboration • Collaborate with counseling services, disability/accessibility services, athletics, residence life, and other campus partners to support student well-being (with appropriate consent)., • Refer students to specialists or community providers when indicated., • Participate in case consultation and interdisciplinary team meetings., • Assist in developing care plans for students with complex medical or mental health needs. Health Promotion & Prevention • Support campus health promotion initiatives and outreach events., • Contribute to public health efforts such as vaccination campaigns and other wellness programming., • Provide consultation for campus health concerns and emerging student needs. Documentation & Compliance • Maintain accurate, timely, and confidential electronic health records., • Ensure compliance with HIPAA, state regulations, and institutional policies., • Review and act upon student health history and immunization records., • Participate in quality improvement initiatives and accreditation processes as applicable. Administrative & Professional Responsibilities • Participate in staff meetings, training, and campus committees as appropriate., • Assist with development of clinical protocols and health center policies., • Assist with regular updates to the department’s policy and procedure manual for health services., • Maintain licensure, certification, and continuing education requirements., • Support training and supervision of student workers, interns, or graduate trainees as appropriate.The approved rate of pay is: $53.00/hr - $56.00/hrRequirements: Qualifications Required • Must hold an active New York State Physician Assistant license and practice in accordance with New York Education Law and Public Health Law, including applicable provisions for prescriptive authority and collaboration with supervising physicians., • Minimum 1–2 years of clinical experience in primary care, family medicine, urgent care, adolescent/young adult health, or college health (may consider strong new graduates)., • Demonstrated ability to work with diverse populations and emerging adults., • Strong interpersonal, communication, and collaborative skills. Preferred • Experience in college health, adolescent medicine, family practice, or community health., • Experience with electronic health records., • Interest in health promotion, mental health integration, and preventive care., • Experience working in interdisciplinary or educational settings. Work Schedule • Primarily Monday - Friday daytime hours, with an expectation of one evening clinic per week to support student access and campus needs., • Special event coverage as needed. Work Environment • Fast-paced outpatient college health center., • Frequent interaction with students, faculty, and campus partners., • Requires ability to maintain confidentiality and professional boundaries in a campus environment.

Job Description We are currently seeking an experienced Driller to support our environmental and geotechnical drilling programs in Rochester, New York. This full-time position requires experience with soil sampling, installation of various size groundwater monitoring and recovery wells, rock coring, air & mud rotary and geotechnical drilling. Additional responsibilities include routine maintenance and minor mechanical repairs of equipment. Duties • A minimum of 5 years of experience as lead driller on truck or track-mounted rotary drill rig, • Commercial Driver License (CDL) with clean driving record, • 40-hour HAZWOPER training required Requirements • OSHA 10-hour or 30-hour construction safety training are preferred but not required, • Ability to weld a plus, • Experience with operation of heavy equipment (e.g., excavator, bulldozer, etc.) a plus Salary Range: $30.00 - $40.00 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description We are looking for a reliable LPN (Licensed Practical Nurse) / RN (Registered Nurse)to work directly with a physician or APP assisting with his daily office schedule. The ideal candidate will be professional and efficient and able to multitask in a fast paced environment. Responsibilities • Record a patient’s medical history accurately, • Chart review and preparation, • Take and record measurements of blood pressure, temperature, heart rate etc., • Observe patients under treatment to identify progress, side-effects of medications etc., • Administer injections, prescribed medications, and catheters., • Assist MD with office visits, procedures and minor surgical procedures., • Communicate with patients’ family or friends to relay information as needed., • Assist fellow team members with phone calls, stocking, set-up, sterilizing and other responsibilities as needed. Skills • Proven experience as LPN or similar role, • Familiarity with safety and sanitation standards and procedures, • Understanding of confidentiality obligations and nursing best practices, • Excellent knowledge of medical terminology, • Good computer skills and accurate data entry, • Good physical condition and stamina, • Excellent communication and interpersonal skills, • Compassionate and able to handle stress, • Successful completion of LPN license program is a must Benefit Conditions: • Waiting period may apply, • Only full-time employees eligible EMR Used: • Medent / Epic Environment: • Outpatient Qualifications: • Current State Nursing License, • Willing to travel between offices Employer type: • Physician office Relocation Assistance Provided: • No Work Remotely • No

Job DescriptionSummary/Objective: The responsibility of the Digital Press Operator is to operate digital printing equipment to create high quality print copies from a variety of source files. Operate digital color equipment and standard document finishing equipment including guillotine cutter. Use computers to create layouts and printed materials that are sent to printing presses for production. Listen to CSR/Sales specifications and adjust attributes such as size and resolution to create a high-quality finished product. Possess a strong eye for detail and enjoy working with technology. Manage multiple projects with varying timelines. Schedule Rotates every two weeks • A Shift: Monday–Friday, 7:00 AM–3:30 PM, • B Shift: Monday–Friday, 3:30 PM–12:00 AM (Midnight) Essential Functions: • Process Customer Print orders daily., • Prioritize work assignments based on deadlines, overall company workload, machine capability and client needs., • Operate Digital Printing Equipment to create high quality print copies from a variety of source files., • Operate digital color equipment and standard document finishing equipment including guillotine cutter., • Troubleshoot printer issues by performing minor repairs and routine equipment maintenance., • Use software/hardware to complete needed repairs and recognize when a service call is required., • Restock Printing Supplies: paper, toner, labels, and additional printing materials., • Order labels and other components to keep operations going efficiently and on schedule., • Seeks guidance and direction as necessary for performance of duties., • Demonstrates good judgment in investigating problems., • Respects the confidentiality of company information., • Maintains cooperative working relationship with supervisor., • Makes best use of time during the workday., • Consistently shows ability to recognize and deal with priorities., • Performs all duties in an independent manner with little supervision., • Performs all other tasks / duties as may be assigned by their supervisor. Competencies: Digital print operators should have an aptitude for visual color and print design along with strong attention to detail. The following skills are essential to getting the job done: • Print design – digital print operators need to make creative page layouts and process files to send them to a digital press., • Color management – it is essential that digital print operators are well-versed in color theory and processing colors for print graphics., • Computer skills – digital print operators need to be well-versed in various computer programs focused on digital printing., • Troubleshooting – when equipment or printing jobs malfunction, digital print operators need to fix them., • Customer service – clearly presenting print information and interacting with fellow employees is essential for digital print operators., • Time management – multitasking and fulfilling print orders in an organized, timely fashion is a critical requirement for digital print operators. Requirements/Qualifications: • 2+ years of digital printing experience, • Ability to work in a fast-paced production environment., • Ability to work well with co-workers in a team environment., • Ability to operate computer-based technology. Preferred Education and Experience: • High School Diploma or equivalent and/or equivalent professional experience. Physical Demands: • Regularly required to talk or hear., • Regularly required to sit, regular use of hands., • Frequently required to stand and walk., • Occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl and use foot/feet to operate machine., • Occasionally lift and/or move up to 60 pounds., • Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus., • The employee must be able to work under pressure with ever changing deadlines and priorities. AAP/EEO Statement Flower City Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), gender, national origin, ancestry, age, physical or mental disability, military status, status as a veteran or disabled veteran, sexual orientation, gender identity or expression, marital or family status, genetic information, medical condition, or any other basis protected by applicable federal, state, or local law, ordinance, or regulation.

Job Description Immediate Structural Concrete Foreman Position Available! Other Masonry Positions Available: Carpenters, Masons, Finishers, Laborers, Form Fitters LG Evans Construction, Inc. performs work on a mix of public prevailing rate and private commercial projects in the site and concrete construction market. Applicants with a versatile resume in the concrete trades are encouraged to apply. Reliability, a strong work ethic, and professionalism are a MUST. Work will be primarily in the Rochester and surrounding counties area with some minor travel required. The pay could range $20-$35/hr based on position, experience and is negotiable. We offer medical benefits, PTO, and a 401K plan with company match, along with an excellent working environment!! Apply today! There are a variety of ways: Website: www.lgevansinc.com - submit an application right from the career tab In person: Our main headquarters is located at 1823 Lakeville Road, Avon, NY, 14414 Summary As a Structural Concrete professional, you will be integral to the construction process, focusing on concrete forming, finishing, and installation. Reporting to the Site Supervisor, your role involves utilizing core skills such as hand and power tools to ensure high-quality work. Your premium skills in mechanical knowledge and construction estimating will enhance project efficiency, while relevant skills in blueprint reading and carpentry will support comprehensive project execution. Join our team to contribute to innovative construction projects and ensure structural integrity in a collaborative environment. Responsibilities • Oversee and direct designated concrete crew (Foreman), • Set up and dismantle concrete forms and scaffolding as needed., • Operate power tools and hand tools for concrete finishing and rebar installation., • Read and interpret blueprints to ensure accurate construction., • Collaborate with team members on construction site tasks and renovations., • Maintain safety standards and protocols while working on-site., • Estimate material requirements and assist in the mixing of concrete. Qualifications • Proficient in concrete forming and finishing techniques, • Skilled in using hand and power tools, • Experience in construction site operations and renovation projects, • Knowledge of blueprint reading and construction estimating, • Familiarity with rebar installation and concrete mixing, • Relevant experience in carpentry, drywall, and roofing tasksCompany DescriptionWelcome to LG Evans Construction Inc. We are a commercial site, concrete, and masonry contractor specializing in both private and public works. Driven by our CORE Values, we strive to exceed expectations on every project!Welcome to LG Evans Construction Inc. We are a commercial site, concrete, and masonry contractor specializing in both private and public works. Driven by our CORE Values, we strive to exceed expectations on every project!

Job DescriptionDescription: Job Summary The Pediatric Dental Assistant supports pediatric dentists in delivering high-quality, compassionate oral healthcare to infants, children, and adolescents. This role requires a strong commitment to patient safety, clinical excellence, and child-centered care. The Pediatric Dental Assistant is responsible for preparing treatment rooms, assisting during procedures, ensuring patient comfort, and maintaining strict infection control standards. Work Context • Work is performed primarily in a pediatric dental clinical setting., • Frequent direct interaction with infants, children, adolescents, and their parents or guardians., • Regular exposure to dental instruments, equipment, and materials, including sterilization chemicals and radiographic devices., • Work involves close physical proximity to patients and other clinical staff., • Position requires adherence to strict infection control, safety, and confidentiality standards., • Fast-paced environment with multiple patients scheduled throughout the day., • Requires the ability to manage emotionally sensitive situations, including anxious or uncooperative pediatric patients., • Standing, sitting, bending, and reaching are required for extended periods., • May require assisting patients with special healthcare needs., • Work hours may include early mornings, evenings, or occasional weekends, depending on practice operations., • Scheduling may include working at two seperate office locations. Primary Job Duties • Prepare patient, sterilize or disinfect instruments, set up instrument trays, prepare materials, or assist dentist during dental procedures., • Taking patient x-rays., • Record treatment information in patient records., • Take and record medical and dental histories and vital signs of patients., • Provide postoperative instructions prescribed by dentist., • Assist dentist in management of medical or dental emergencies., • Instruct patients in oral hygiene and plaque control programs., • Clean and polish removable appliances., • Apply protective coating of fluoride to teeth., • Schedule appointments, prepare bills and receive payment for dental services, complete insurance forms, and maintain records, manually or using computer., • Order and monitor dental supplies and equipment inventory. Activities • Assist the pediatric dentist during examinations, cleanings, restorative procedures, and minor oral surgeries., • Prepare and organize treatment rooms, instruments, materials, and equipment before and after patient visits., • Take, process, and document dental radiographs in accordance with safety and regulatory standards., • Clean, disinfect, and sterilize instruments and operatory areas following established infection control protocols., • Escort pediatric patients and their families to and from treatment areas and help position patients for procedures., • Provide age-appropriate explanations of dental procedures to patients and parents to support understanding and comfort., • Apply preventive dental treatments as permitted by state regulations, such as fluoride varnish and sealants., • Monitor patient comfort and behavior during treatment and promptly report concerns to the dentist., • Maintain accurate patient records and update clinical documentation in the practice management system., • Support daily clinic operations, including supply management, operatory turnover, and team coordination. Tools and Technology • Dental hand instruments, including mirrors, explorers, scalers, and forceps., • Chairside dental equipment such as dental chairs, delivery units, suction systems, and curing lights., • Dental radiography equipment, including digital X-ray sensors, intraoral cameras, and panoramic imaging systems (as applicable)., • Sterilization and infection control equipment, including autoclaves, ultrasonic cleaners, and instrument cassettes., • Preventive care materials and tools, including fluoride varnish applicators and sealant delivery systems., • Personal protective equipment (PPE), including gloves, masks, face shields, and protective eyewear., • Dental practice management software for scheduling, charting, and patient records., • Electronic health record (EHR) systems and digital imaging software., • Standard office equipment, including computers, printers, phones, and scanners. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. The company is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. Requirements: Education and Experience • High School Diploma - or the equivalent (for example, GED), • Post-Secondary Certificate, • Some College Courses Knowledge • Knowledge of pediatric dental procedures, instruments, materials, and terminology., • Understanding of child behavior management techniques used in pediatric dentistry., • Knowledge of infection control standards, including OSHA, CDC, and HIPAA regulations., • Familiarity with dental radiography principles and radiation safety practices., • Knowledge of preventive dental care practices, including fluoride application and sealants, within state scope-of-practice guidelines., • Basic understanding of oral anatomy, tooth development, and common pediatric dental conditions., • Awareness of emergency procedures and patient safety protocols in a dental clinical setting., • Working knowledge of dental practice management software and electronic health records (preferred). Skills • Strong ability to communicate effectively with children, parents, and caregivers in a calm, reassuring manner., • Excellent chairside assisting skills, including instrument transfer, suctioning, and patient monitoring., • Ability to manage pediatric patient behavior and reduce anxiety through empathy and positive reinforcement., • Proficiency in taking and processing dental radiographs while adhering to safety standards., • Strong organizational and time-management skills in a fast-paced clinical environment., • Attention to detail and accuracy in clinical procedures and documentation., • Ability to work collaboratively as part of a dental healthcare team., • Manual dexterity and fine motor skills for handling dental instruments and materials., • Basic computer skills, including use of dental practice management and imaging software., • Ability to adapt to changing schedules, patient needs, and clinical priorities.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Transportation Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • Working largely independently, performs routine construction inspection services under the supervision of a Chief Inspector or Resident Engineer. May be responsible for review and assignment of work for Inspector(s)., • Duties include taking and documenting detailed measurements for payment, supervising material testing, notifying supervisor of issues and potential deviations from plans and specifications, and working with the contractor to resolve minor issues without guidance., • This position requires full knowledge of company standards, plans, and New York State DOT specifications. Qualified candidates will demonstrate familiarity and competence with various common job site conditions, will be able to clearly communicate project requirements to a contractor, and have the ability to resolve day-to-day disputes with a contractor, as well as have the experience required to know when to elevate an issue to their supervisor, all while maintaining detailed records of work and measurements and documentation for payment., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 5 years related experience, or similar position with experience in the construction field and transportation projects., • NICET Level III certification or successful completion of Fundamentals of Engineering exam required., • Associates Degree required; Bachelor's Degree a plus. Accepted employment offers will be contingent upon candidate's ability to pass a pre-employment drug and alcohol screen in accordance with Federal Railroad Administration Title 49 CFR Part 219 Estimated Compensation Range: $79,040- 95,680.00/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description JOB SUMMARY Under the direct supervision of the Quality Director, with input from the Quality Engineer(s), the CMM Technician performs inspection of machined parts using the multiple CMM’s available to provide data for First Article, In-Process and Final Inspections. JOB REQUIREMENTS Requirements of this position include, but are not limited to: • Pull the correct CMM program and load into the CMM., • Stage the part on the CMM and provide detailed information pertaining to if the machine parts meet all Engineering Drawing / Model / Customer requirements., • Communication of inspection results to machine operators, quality management, engineering team and customers when required., • Understanding of the NCMR process including creating and communicating the NCMR information during a Material review board meeting., • Set up the CMM for inspection based upon priorities established by the Quality Director., • Ability to make minor program adjustments when required and once verified by Senior CMM Technician, or CMM Programmer., • Open plate inspection when required to validate CMM data that may be questionable., • Daily maintenance of CMM’s., • Must be flexible, approachable, and work well with all employees. KNOWLEDGE, SKILLS, AND ABILITIES • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Ability to understand and carry out oral and written directives., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of specific equipment to be operated, including inspection equipment., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to use precision measuring tools such as calipers, micrometers and gages., • Ability to read drawings and blueprints and be familiar with common machine tools., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • Must be able to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems., • Must have a working knowledge of Geometric Dimensioning and Tolerancing, Statistical Process Control, Microsoft Word, Microsoft Excel, and Pc-DMIS., • Must be able to program coordinate measuring machine using Pc-DMIS., • Must be able to perform open plate inspection using standard measuring equipment and methods. EDUCATION AND EXPERIENCE • 5 years of experience in inspecting precision machined metal parts, • 3 years of experience in programming inspection for precision machined parts on a CMM using Pc-DMIS JOB BENEFITS • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $23.00 - $37.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Gender/Sexual Orientation/Gender Identity/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description What to expect as a Commercial Security Installation Technician III: • Assist the Project Manager regarding on-site scheduling of work activities and timely delivery of equipment, • Responsible for the connection of control panels, application requirements, wire concealment, and security software installation, • Install, program and configure commercial electronic security systems for enterprise commercial clients (door access control, CCTV, intrusion detection, low voltage communication, electronic locks, point sensors, signaling devices, ect.), • Troubleshoot new installations to ensure the systems are functioning properly and satisfy codes, • Demonstrate Allied Universal's core values as a highly skilled leader on the Installation Team, • Supervise several teams comprised of Security Installation Technician I's and II's, • Manage several medium- to large-sized jobs simultaneously, doing so within approved hours and margin tolerances, • Drive to client sites with a company-issued vehicle to perform the system installation and confirm the system is operating effectively and meets contract requirements, • Installation of electrical wiring, panels, cables, and security devices, • Completes miscellaneous tasks as assigned by manager What knowledge and skills are required: • A high school diploma or equivalent is required, • Minimum 2-3 years of experience in the physical security, fire alarm or low voltage communication industry installing field devices, programming systems, and running medium- to large-sized jobs, are required, • Experience with any or all of the following is preferred: Software House, Lenel, AMAG, S2, Brivo, Milestone, Exacq, Axis, Bosch, Commend, DMP, Open Options, Notifier, Fluidmesh or ONSSI, • Possess or have the ability to obtain proper state licensing once hired (Low Voltage D license, Alarm Installer Lic. etc.), • Ability to meet deadlines and work in a fast-based environment with minimum direction, • Good communication skills for effective interaction with internal and external customers, • Strong troubleshooting skills and mechanical aptitude, • Ability to be on-call on a rotational basis, • Must be detail-oriented and organized Must possess a valid driver's license with at least one year of driving experience, a clean driving record (no major violations within the last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by company policy, and the ability to safely operate a vehicle. • Ability to complete time entry from home on a daily basis via the Internet, • Ability to deliver product familiarization training to end-users, • Strong proficiency in Microsoft Office products (Word, Excel, and Project), • Ability and track record of successfully loading servers with third-party applications and deploying IP video solutions, • Possess general working knowledge of network architecture, • Overnight travel may be required on an as-need basis BENEFITS: • Pay: $40 - $48 hourly, • Medical, dental, vision, retirement plan, basic life, AD&D, and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time is offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-26 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1577483

Job DescriptionDescription: Position Summary Operates CNC (Computer Numerically Controlled) lathes and/or mills to machine metallic and nonmetallic workpieces to produce precision machined parts at acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damaged product or damage to machine center. Making necessary minor machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity Requirements: Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: • Operate CNC mills and/or lathes, running new and existing production jobs of moderate complexity without assistance unless unusual problems occur. Must be able to make minor adjustments when necessary., • Monitor perishable tooling inventory for each assigned job., • Perform all required inspection duties to maintain acceptable quality levels., • Inform supervisor of any problems associated with equipment, processes or procedures and offer ideas or possible solutions., • Complete job-related paperwork accurately and completely which includes: expedite sheets, move tickets, and job cards., • Perform routine preventative maintenance, as required, including but not limited to daily preventative machine maintenance logs., • Analyzes blueprint and specifications manual for requirements such as dimensions and tolerances, tooling instructions on fixturing, gauging, print rev. level, and cutting instruments., • Computes unspecified dimensions and necessary machine settings as required by the work order., • Positions and secures tools in holders, lifts work piece manually or with hoist, and secures work piece in chuck or appropriate fixture., • Starts machine, turns or initiates software program and engages feed. Directs coolant flow to tool and work piece., • Observes material removal step(s) to verify process integrity and detect excessive wear or malfunction., • Verifies conformance of machined work pieces to specification tolerances., • Plots dimensional data on control charts and collects SPC Data. Initiates proper procedural action if control chart warning limits are identified or out-of-tolerance conditions are experienced., • Basic and Advanced Vantage training, • Follow company policies as outlined in the employee handbook and values, • Other duties may be assigned. Supervisory Responsibilities This job has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED); and one to five years related experience and/or training or equivalent combination of education and experience. Internal Training Requirements • Company Practices & Policies, • Lock Out/Tag Out Video, • Company Benefits Orientation, • Personal Protection Equipment, • Mission, Vision & Values Training, • Right-to-Know Training, • Values Based Leadership, • Traveler Sign-Off, • Bloodborne Pathogen, • Hazardous Communication, • Fire Extinguisher Safety Benefits: • Competitive Pay, • Medical effective on start date, • Dental, • Life Insurance (plus additional supplemental coverage), • 401(k) program, • Short & Long Term Disability, • Profit Sharing Program, • Vacation Program, • Educational Financial Assistance, • Flexible Spending Accounts, • Health Savings Accounts, • And others!

Job Description CNC Lathe Machinist - A Shift Location: Brinkman Precision Inc./West Henrietta, NY Job Type: Full-Time Shift: B Shift Pay: $20.00 to $40.00/hr. based on experience Benefits: Health, Dental, Vision, 401(k), PTO, Paid Holidays, and more About Us: At Brinkman Precision, Inc., we specialize in high-precision machining for industries such as aerospace, medical, defense, and industrial manufacturing. With a reputation for quality and innovation, we are committed to delivering exceptional parts and service to our clients. We are currently seeking an experienced CNC Lathe Machinist to join our growing team. Job Responsibilities: • Set up, operate, and maintain CNC lathes to produce precision components according to blueprints and specifications, • Perform tool changes, offset adjustments, and minor programming edits as needed, • Inspect parts using calipers, micrometers, and other precision measuring tools to ensure quality, • Interpret technical drawings and machining instructions, • Troubleshoot and resolve basic machine issues, • Work with team members and engineers to meet production deadlines and quality standards Qualifications: • Minimum 3 years of experience operating CNC lathes in a precision machining environment, • Proficiency in reading and interpreting technical drawings and GD&T, • Ability to use precision measuring instruments accurately, • Attention to detail and commitment to producing high-quality work, • Ability to work independently and as part of a team, • Must be reliable Brinkman Precision, Inc. offers competitive wages and excellent benefits including: • Paid Time Off, • 401 (k) Matching, • Medical, • Dental, • Short Term Disability, • Long Term Disability, • Life Insurance, • And more! Please submit your resume with past experience listed for consideration and we appreciate your interest in our company! EOE, including disability/vets. Job Posted by ApplicantPro

Job DescriptionDescription: Join our Team! Monroe Ambulance is a family-owned private EMS Agency based in Rochester, NY. We have Proudly been in business since 1975, providing 24/7 advanced and basic life support, patient transport, and community education to both Monroe and Franklin County. Monroe Ambulance offers a family-friendly environment where you can become part of the critical infrastructure that keeps our communities safe. ?Here you’ll find all departments work together as a team to live out our core values: Quality, Compassion and Integrity with the goal of providing the highest quality care available to the communities we serve. About the Opportunity Full-time? Pay range: Starting at $25/hour, with final compensation commensurate with experience. On-call pay additional -$50/night during the week, $100/day on weekends, 4hr minimum pay at your hourly/overtime rate if you are called in however most cases can be handled over the phone, on-call is on a 3-person rotating schedule Choose from 4 High-Deductible Health Plans in 2025- including one single-coverage plan that’s 100% company paid Comprehensive health, dental and vision coverage options for you and your family Retirement savings plan with company match Paid time off, 7 paid holidays per year, and more! Company Sponsored Ford STARS Training allowing you to become fully Ford certified while you work! Company Paid PPE fund allows you up to $500/year for work boots, safety glasses including prescription safety glasses, gloves, etc. Position Overview Repairs and maintains company and customer vehicles and mechanical equipment (engines, hydraulic systems, etc.) within the regulations and standards set by DOT (Dept. of Transportation), NYS DOH (NY state Dept. of Health), and DMV (Dept. of Motor Vehicles) by performing the following duties. Essential Job Functions • Observes mechanical devices in operation to watch and listen for causes of failure, • Completes thorough documentation of all work performed, condition of the vehicles, parts to be ordered, and work to be scheduled., • Diagnoses electrical and computer control devices using appropriate testing equipment., • Dismantles devices to gain access to and remove defective parts., • Examines form and texture of parts to detect imperfections., • Inspects used parts to determine changes in dimensional requirements., • Repairs or replaces defective parts., • Installs special functional and structural parts in devices., • Lubricates and cleans parts., • Starts devices to test their performance., • Sets up and operates drill press, grinder, and other metalworking tools to make, repair, and rebuild parts., • Repairs electrical equipment., • Preventative maintenance on a scheduled basis for all fleet vehicles., • Completion of fabrication work as assigned, to include; body work, painting, etc., • Road service calls as necessary to evaluate and repair failed vehicles and equipment. This includes our vehicles in Franklin County (Malone NY) once every other month on a rotating schedule (travel and hotel are paid by company)., • Timely communication to Supervisors and Dispatchers of vehicles off road for service and repair. (To include target time for returning to road service.), • Road tests equipment and vehicles., • Diagnoses chronic repair problems and devises permanent repair resolution plan., • Operating snow removal equipment., • Performs minor building maintenance and equipment repair as needed. Requirements: Requirements • ?Must have own tools?, • Valid NYS Driver’s License, • Minimum of Two (2) years as an Automotive Technician, • ASE Certified Technician (A1-A8) Not required but preferred, • NYS Inspectors License is a plus, • Technical skills to diagnosis, electrical and mechanical repairs, • Effective and professional communications skills, • Work well in a team environment, • Basic computer skills, • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • High School diploma or equivalent. One year certificate from college or technical school; and three to six months related experience and/or training; or equivalent combination of education and experience. Must be at least 18 years of age., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. The employee must regularly lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee regularly works near moving mechanical parts; in high, precarious places; and in outside weather conditions and is regularly exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, extreme cold, extreme heat, risk of electrical shock, and vibration. The noise level in the work environment is usually very loud.

Job DescriptionDescription: Position Summary The Vice President of Real Estate Development and Asset Management is a senior-level leader responsible for overseeing RAUNY's real estate projects, facilities management, and procurement strategies. This role involves collaborating with organizational leadership to ensure that all real estate, facility, and procurement initiatives align with RAUNY’s business goals. The incumbent will manage the organization’s real estate portfolio, lead strategic planning for facility development, and oversee procurement processes to ensure quality, cost-effectiveness, and compliance. In compliance with NYS's Pay Transparency Act, the salary range for this position is listed above. East House considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. The hiring process for this position may require a criminal background check and/or motor vehicle records check. Any verbal or written offer made is contingent on satisfactory results, as determined by Human Resources. Key Responsibilities Real Estate Development and Asset Management • Develops and executes on a real estate development, capital improvements (major and minor requests), and facility management strategy in partnership with the Board of Directors, Real Estate Committee, Chief Executive Officer and Chief Program Officer to ensure East House has high quality facilities that meet community needs., • Coordinates and follow through on development details with the construction, property management, legal and accounting departments, to ensure compliance with all funding agencies, due diligence and loan and equity closings., • Evaluates potential sites, conducts due diligence, and secures financing and approvals for affordable housing and other development projects., • Facilitates partnerships among developers, community-based organizations, capital partners, and governmental partners., • Drafts and submits budgets based on work scope and resource needs and effectively managing construction projects to ensure the timely and within-budget completion of new facilities., • Leads project management efforts, including assembling and coordinating development teams (architects, engineers, contractors), securing funding, and overseeing construction to ensure projects are completed on time and within budget., • Manages project construction as RAUNY’s representative at construction meetings, and resolves issues related to schedule, local permits, third party professional’s responsibilities and change order requests., • Manages the progression of all development projects including gaining board approval and the timely preparation of board materials., • Negotiates the purchase of land and/or existing apartment buildings and secure necessary permits, licenses, and funding for real estate projects., • Oversees facilities and property teams, partnering with the Director of Facilities and Property to create and monitor budgets, manage maintenance requests, and ensure project timelines and financial goals are met., • Prepares for and make public presentations as necessary for local approvals and community support, including the PADIVAN site selection process., • Provides oversight and administration for housing management for Recovery Associates of Upstate New York, East House Corporation and East House Properties, including planning, real estate development, financial analysis, subcontractor supervision and coordination with vendors for all construction and capital projects., • Serves as the primary staff liaison for the Board of Directors Real Estate Committee, managing development projects from inception through construction, including RFP responses, contract negotiations, and obtaining necessary permits and licenses providing updates as necessary., • Working together with Management to meet with local municipal leaders to garner support for proposed developments and negotiation of tax abatement agreements. Financial Management • Track and manage key performance indicators (KPIs) related to real estate development, facilities management, and affordable housing property management, ensuring alignment with financial targets., • Budget Management: Support budget forecasting and manage expenditures for real estate and facilities, projects, including all large-scale purchases., • Maintains real estate procurement and project records in accordance with retention schedules. Project Coordination & Compliance • Lead and coordinate multiple projects, ensuring adherence to timelines, budgets, and stakeholder expectations., • Collaborate with the Office of Ethics, Compliance & Quality to ensure compliance with all regulations and organizational policies., • Identify opportunities for continuous improvement, driving efficiency across all areas of responsibility., • Develop lead and participate in cross functional teams., • Perform cost analyses and return on investment (ROI) reviews for projects, processes, or products., • Oversee the proper disposal of all property and equipment., • Align with all relevant business functions in achieving strategic company targets., • Oversees project documentation and completion., • Collaborate with the Office of Ethics, Compliance & Quality to ensure compliance with all applicable regulations and organizational policies., • Identify opportunities for process improvements and cost savings, driving efficiency across all areas of responsibility., • May perform other duties as requested by the Chief Financial Officer. Skills • Values alignment: Ability to lead, perform, and be accountable in alignment with East House’s values of Humanistic, Optimistic, Integrity, Progressive and Collaborative, • Strong business acumen: A solid understanding of the financial and economic factors that influence purchasing decisions is essential., • Strategic thinking: A strategic mindset helps to create procurement strategies that align with business needs and goals., • Excellent negotiation skills: Good negotiation skills and ability to balance being firm while kind when negotiating or navigating situations with a difference of opinion., • Attention to detail: High levels of attention to detail to spot potential risks and issues in time., • Strong leadership and team management skills with the ability to mentor and manage teams., • An understanding of the real estate development and public planning process; familiarity with public housing programs at the federal, state and local level., • Excellent financial acumen, with experience in budget management, financial analysis and modeling., • Advanced knowledge of real estate law, construction processes, and procurement regulations., • Excellent communication, interpersonal, problem-solving, and decision-making abilities., • Demonstrated ability to build rapport with internal and external stakeholders of all levels., • Effective decision-making abilities, including analyzing information and determining appropriate next steps on projects., • Ability to effectively collaborate with architects, engineers, and other specialists. COMPETENCIES Strategy & Execution Leadership & Performance • Demonstrates Business Acumen., • Consistently displays political savvy., • Champions change and leads organizational transformation., • Visionary Thinking/Strategy., • Drive for Results., • Solution-focused thinking., • Commitment to East House Values., • Personal Accountability., • Relationship Building/Collaboration., • Commitment for Diversity, Equity & Inclusion., • Ethical Decision Making/Leadership., • Operational Efficiency, Feedback, & Continuous Improvement. Working Conditions/Work Environment Traditional office environment with flexible work hours as needed. Occasional travel required to project sites and meetings within the greater Rochester area. Potential for travel outside of Monroe County. Position requires automobile, driver’s license and insurance. Physical Demands The demands/work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, talk, hear, stand, walk, ability to reach above or below shoulders, use hands to type and/or perform light lifting and occasional stair-climbing. Experiences frequent interruptions; required to meet inflexible deadlines; requires concentration and attention to detail; requires ability to problem-solve; requires a high level of organizational and prioritization skills. Requires ability to maintain confidentiality of information received. Requires ability to sit for prolonged periods; exposed to visual display terminal for prolonged periods; dexterity and precision required in the operation of a computer. Reasonable Accommodation East House provides reasonable accommodations to applicants with disabilities under the Rehabilitation Act, the Americans with Disabilities Act, the New York Human Rights Law, or similar applicable law. If you need reasonable accommodation for any part of the application and hiring process, please contact the Human Resources office at 585-238-4800 or email your request to HRTeam@easthouse.org. Determinations on requests for reasonable accommodation will be made on a case-by-case basis. EEO Statement East House provides equal opportunity to all qualified individuals and does not discriminate on the basis of race, color, creed, age, marital status, sex, gender, religion, sexual orientation, gender identity, gender expression, national origin, veteran status or disability, or any other protected statuses in its hiring, promotions, and other employment activities. Requirements: Minimum Qualifications Education • Bachelor’s degree in business, finance, accounting, real estate/community development, or a related field. Comparable education and experience may be considered. Experience • 10+ years of increasing responsibility in affordable housing, particularly in the development of housing for low and moderate-income households, facilities management, or procurement, with a strong background in multi-family housing and capital projects. Proven track record of successful large-scale projects., • 5+ years’ experience in a senior leadership role (including supervision) with demonstrated experience of state and federal housing funding sources and programs and overseeing large-scale projects and cross-functional teams, • Proven track record of successfully managing complex development projects from inception to completion., • Provided oversight for the financial, administrative, and regulatory compliance aspects of various affordable housing programs., • Extensive knowledge of real estate development, multi-family housing, financial structuring, and capital raising., • Proven experience in managing large-scale real estate projects, facilities, and procurement processes., • Strong leadership, negotiation, and project management skills., • Ability to work collaboratively with cross-functional teams and external partners., • Understands the requirements for NYS LIHTC and all other related funding applications involved with developing NYS affordable housing.

Doctor of Medicine | Dermatology Location: Rochester, NY Employer: Lancesoft Inc Pay: Competitive weekly pay (inquire for details) Start Date: ASAP About the Position Job Description Join our dynamic dermatology team in Rochester, NY ! This locum tenens position allows you to provide high-quality dermatologic care in a supportive outpatient clinic environment . Perfect for providers looking to fill coverage or explore a potential full-time MD role . Schedule: Monday–Friday, 8:00 AM – 4:30 PM (Day Shift, No Call) Patient Load: 25–35 patients per day Locations: Primary clinic in Rochester with occasional support to nearby clinics Procedures: Minor procedures optional for experienced providers Documentation: Maintain patient records using EPIC Requirements Board Certified Dermatologist (highly preferred) New York State Medical License in hand Minimum 3 years of recent dermatology experience Proficiency with EPIC electronic medical records Current BLS certification Consistent work history (gaps >30 days should be addressed) Strong communication skills and professional demeanor Benefits Job Benefits ⏰ Flexible scheduling options Supportive clinical team , including LPNs, RNs, and MAs (1 per 12 patients) ✂️ Opportunity to perform minor surgical procedures Make a meaningful impact on patient care while maintaining a balanced work-life schedule Observe major holidays while providing quality care

Doctor of Medicine | Dermatology Location: Rochester, NY Employer: Adelphi Locums Pay: Competitive weekly pay (inquire for details) Start Date: ASAP About the Position JOB OVERVIEW • Job Title: Dermatology • Job Type: Locum Tenens • Location: Rochester, NY • Service Setting: Outpatient Clinic • Coverage Type: Clinical Only • Coverage Period: June 1, 2026 – Ongoing (26 weeks) • Clinical Shift Schedule: Monday – Friday, 8:00 AM – 4:30 PM PATIENT INFORMATION • Patient Demographics: Adults and Adolescents • Patient Volume/Census: Approximately 25–35 patients per day • Case Mix: General dermatology with option for minor surgical procedures FACILITY INFORMATION • EMR System: Epic • Office Equipment Available: Standard dermatology clinic equipment • Support Staff Available: 1 support staff per 12 patients (LPN, RN, MA) • Reason for Coverage: Supplemental Coverage COMPENSATION & BENEFITS • Rate: TBD • Travel, Lodging, and Malpractice Insurance: Not Specified REQUIRED PROCEDURES • General dermatology evaluations and treatments • Minor dermatologic procedures (optional) JOB REQUIREMENTS • Licenses: Active NY license required (in hand) • Board: Board Certified preferred • Certifications: BLS required • Experience: Minimum 3 years recent dermatology experience • Other Qualifications: Must have recent Epic experience; no significant work gaps DUTIES & RESPONSIBILITIES • Provide outpatient dermatology care • Diagnose and treat skin conditions • Perform minor procedures if applicable • Collaborate with clinic staff • Maintain accurate documentation in Epic EMR

Doctor of Medicine | Dermatology Location: East Rochester, NY Employer: Lancesoft Inc Pay: Competitive weekly pay (inquire for details) Start Date: ASAP About the Position A fantastic locum tenens Dermatology opportunity is available in Rochester, New York , offering a consistent weekday schedule, strong clinical support, and the chance to practice in a busy, well-established outpatient setting. This role is perfect for a board-certified dermatologist seeking stability, high patient volume, and excellent compensation—without call responsibilities. Position Overview: Location: Rochester, NY Start Date: June 1, 2026 (or as soon as credentialed) Assignment Length: 26 weeks and possible extension Schedule: Monday–Friday, 8:00 AM – 4:30 PM Setting: Outpatient Dermatology Clinic EMR: Epic No Call Required ⚕️ Clinical Details: Patient Volume: 25–35 patients per day Support Staff: 1 clinical support member (LPN, RN, or MA) per ~12 patients Opportunity to perform minor dermatologic procedures based on experience Potential for occasional float coverage to a nearby clinic location Well-structured clinic flow with strong team support ✅ Requirements: Board Certified Dermatologist Active New York license BLS certification Minimum 3 years of recent experience Epic experience required Compensation & Perks: Competitive, best-in-market pay rates (discussed upon interest) Comprehensive malpractice coverage Complimentary travel and lodging All orientation hours paid Predictable weekday schedule for optimal work-life balance If you're looking for a well-supported dermatology role with consistent hours and strong earning potential , this opportunity in Rochester, NY is an excellent fit.

Doctor of Medicine | Dermatology Location: Rochester, NY Employer: Alumni Healthcare Staffing Pay: Competitive weekly pay (inquire for details) Contract Duration: 26 Weeks Start Date: ASAP About the Position Specialty State NY Location 2250 Brighton Henrietta Town Line Rd Fl 2, Rochester, NY, 14623 Requirements Job ID: 3163081 Position Details MD: Location: RGH Genesee Valley Derm with possible float Support to Clifton Springs Start: 6/1/26 or as soon as credentialed Shift: M-F 8a-4:30p BLS required Board Certified HIGHLY preferred Patient load per day: 25-35 ppd Must have 3 years of recent experience Must have recent EPIC experience NY License in hand 1 support staff LPN RN MA for every 12 patients. Notes: Patient volumes typically 25-35 per day open to flexible scheduling support Clifton Springs Dermatology primary office Genesee Valley Dermatology. If the provider has experience and would like to perform minor surgeries that's an option as well. Depending on the number of patients provider will typically have 1 support staff LPN RN MA for every 12 patients. NY License in Hand Epic Experience Required Must be Board Certified Ensure that the work history is up to date Ensure there are no gaps of 30 days If malpractice is involved dismissed or not we need a physician statement Please always include email phone for the candidate Shift Info: Day 5x8-Hour 08:00 - 16:30 Schedule Day 5x8-Hour (08:00 - 16:30) Dates Needed 2026-06-01T06:00:00+00:00 - 2026-11-30T06:00:00+00:00 Alumni Healthcare Staffing offers: Weekly Direct Deposits Travel and Lodging Provided if Needed A+ Rated Malpractice Coverage 24/7 Availability of your Recruiting Consultant & Credentialing Staff If you have availability for this job or are interested in other opportunities, please send an updated CV or contact me today. Danielle Dick (908) 842-8235

Doctor of Medicine | Dermatology Location: East Rochester, NY Employer: Lancesoft Inc Pay: $250 to $279 per hour Shift Information: Days - 5 days x 8 hours Start Date: 6/6/2026 About the Position Description A locum tenens opportunity is available for a Dermatology Physician (MD or DO) starting June 1, 2026, or as soon as credentialed. This is an outpatient role with a Monday through Friday daytime schedule and no call. The position focuses on general dermatology care, with the option to perform minor procedures depending on provider experience. There may also be occasional coverage at an additional nearby clinic. About the facility This is an outpatient dermatology clinic with potential float coverage to a secondary location. The practice maintains a steady patient volume and is supported by a structured clinical team. Facility Type: Outpatient Clinic Practice Setting: Dermatology EMR System: Epic Patient Volume: 25 to 35 patients per day Support Staff: Approximately 1 clinical staff member (LPN, RN, or MA) per 12 patients Procedures: Minor dermatologic procedures optional based on experience Scheduling: Some flexibility available Compensation Pay Rate: Details can be discussed further after applying to the job posting. Travel expenses reimbursed, including: Mileage Rental car Hotel Flight Malpractice Covered Job Responsibilities Provide general dermatology care in an outpatient setting Manage a daily patient load of 25 to 35 patients Diagnose and treat a variety of dermatologic conditions Perform minor dermatologic procedures if qualified and interested Document and manage patient care using Epic EMR Collaborate with clinical support staff to maintain efficient workflow Provide coverage at the primary clinic and assist at a secondary location if needed Qualifications Physician, MD or DO, specializing in Dermatology Board Certification highly preferred and expected per notes Active New York medical license required and must be in hand BLS certification required Minimum of 3 years of recent dermatology experience required Epic EMR experience required Continuous work history required with no gaps greater than 30 days Explanation required for any malpractice history Working Hours Schedule: Monday through Friday Shift: 8:00 AM to 4:30 PM Shift Length: 8 hours Call: None Start Date: June 1, 2026 or as soon as credentialed Contract Length: 26 weeks Coverage Type: Scheduled Skills Strong general dermatology diagnostic and treatment skills Ability to manage a high volume outpatient clinic Experience with minor dermatologic procedures preferred Proficiency with Epic EMR Strong communication and teamwork skills Efficient patient flow management and documentation skills

Doctor of Medicine | Dermatology Location: Rochester, NY Employer: VieMed Healthcare Staffing Pay: Competitive weekly pay (inquire for details) Shift Information: Days - 8 hours Start Date: ASAP About the Position Job Title: Dermatology Physician Job ID: 3163081 Position Details: Emergency privileges will be granted Location: RGH Genesee Valley Dermatology with possible float support to Clifton Springs Start Date: 03/02/2026 (or as soon as credentialed/compliant; approximately 4-6 week lead time) End Date: 08/31/2026 Shift: Monday - Friday, 8:00 AM - 4:30 PM BLS required Will accept board-eligible candidates Patient load per day: 25-35 patients Must have at least 3 years of recent experience Recent EPIC experience required NY License in hand Support staff: 1 LPN, RN, or MA for every 12 patients Notes: Opportunity to perform minor surgeries if interested; flexible scheduling options Hourly Pay Rate: $267.54 Job Order Benefits: Competitive Pay Packages Weekly Pay Schedule via Direct Deposit Comprehensive Medical Benefits (W-2) Robust Referral Bonus Program 24/7 Dedicated team committed to your success throughout your time with VHS Paid sick time in accordance with all applicable state, federal, and local laws Licensure, Certification, Travel, and other reimbursements when applicable VHS is an Equal Opportunity Employer (“EEO”)/Protected Veterans/Individuals with Disabilities/E-Verify Employer and welcomes all to apply #LiveYourLife #VHSCC Benefits Licensure -Certification - Travel and other reimbursements when applicable

Job Description JOB SUMMARY The Maintenance Worker is responsible for general maintenance of property buildings, grounds and equipment. Ensure the property is both appealing and safe for patrons of the mall. ESSENTIAL FUNCTIONS • Maintains grounds and parking lots, performing garbage pick-up, daily litter cleaning each morning, minor routine parking lot repairs, landscaping, mulching, weeding, and other related maintenance activities. Fall and Spring clean-up., • Maintains building by performing minor and routine painting, carpentry, plumbing, electrical wiring, tile repair, power washing, and other related maintenance activities., • Performs maintenance and repairs on equipment, including small engines., • Notifies the supervisor of the need for significant lighting, heating, and ventilating equipment repairs., • Maintains motor vehicles (trucks, tractors, salters, and plows)., • Cleans snow and debris from sidewalks and parking lots using a variety of equipment (training provided). Premium hourly rates apply for equipment operators., • Prune trees, trims shrubbery, and cultivate flowers., • Minor sidewalk and hardscape repairs., • Occasional work inside., • Operates power tools and equipment., • Must have a valid Driver’s license. OTHER DUTIES • This description is not meant to be an all-inclusive list of duties and responsibilities but constitutes a general definition of position scope. EDUCATION & EXPERIENCE: • High school diploma or general education degree (GED)., • Trade school certification and mechanical repair courses or equivalent experience, a plus., • Experience in one or more relevant fields is helpful but not necessary, plumbing, electrical, dry wall, carpentry, small engine repair is a plus. KNOWLEDGE, SKILLS & ABILITIES: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence., • Apply common sense understanding to carry out detailed but uninvolved written or oral instructions. PHYSICAL DEMANDS AND WORK ENVIRONMENT: The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodation may be provided to enable individuals with disabilities to perform essential functions. • Regularly required to stand; walk; bend, stoop, kneel, push, pull; use hands to handle or feel; reach with hands and arms; talk or hear; and smell., • Occasionally required to sit, climb, and balance., • Occasionally required to lift and/or move up to 50 pounds., • Specific vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus., • The work environment is indoors and outdoors, frequently exposed to all types of weather conditions., • Occasionally exposed to moving mechanical parts; high, precarious places; and risk of electrical shock., • The noise level in the work environment is usually moderate. The salary range listed for this position represents the anticipated compensation based on experience and qualifications and may vary depending on internal factors and applicable laws. Hours are 6 AM - 3:00 PM Monday through Friday with some early morning hours during snow removal. Occasional OT during winter months.

Position Summary: Participates in surgical procedures, assists the registered nurse in‐patient care, maintains aseptic technique, prepares sterile and non‐sterile supplies and equipment. Anticipates the needs of the surgeon as required. Education, License & Cert: Graduate of an accredited Surgical Technician School, or LPN with a current license in the state of practice, or completion of a completed and appropriate training program for surgical technology in the United Sates Army, Navy, Air Force, Marine Corps, Coast Guard, or Public Health Service Commissioned Corps. Certified Surgical Technologist (CST) certification preferred. Subject to state specific grandfather clauses, candidate may be exempt from degree requirement. Experience: Experience preferred, but may be trained on -the-job, if recent graduate. Must have general knowledge of surgical procedures and draw specialized training from working with physician or physicians on the job. Essential Functions: 1. Completion of hospital and department specific orientation., 2. Perform basic aseptic technique in accordance to policy and procedure of Corning Hospital., 3. Basic knowledge of instrumentation for minor cases., 4. Scrub minor cases alone., 5. Working knowledge of electrocautery, suction apparatus, surgical tables, autoclave and steris processes and patient safety principles in the OR., 6. Knowledge of surgical anatomy for each case scrubbed., 7. Know surgical terminology specific to each case scrubbed., 8. Knowledge of standard precaution guidelines of Corning Hospital, 9. Knowledge of instrumentation for all cases., 10. Scrub all cases offered in the Operating Room., 11. Knowledge of the use of specialty equipment, i.e.: ophthalmology microscope, laser, video endoscopy equipment, fracture table)., 12. Certification as an OR technician recommended., 13. Functions in an “on call” capacity when assigned., 14. Becomes proficient in a surgical specialty to maintain equipment, order supplies and perform inservice training for OR staff as requested. Other Duties: 1. Participates in patient care under the supervision of the surgeon, professional nurse and anesthesiologist., 2. Is authorized to access secured storage areas in the performance of essential job functions and duties., 3. Assists in the care, preparation and maintenance of sterile and unsterile supplies and equipment., 4. Works with Central Supply staff to ensure sterility of equipment., 5. Performs supportive functions related to surgical procedures following principles of sterile technique., 6. Follows Standard Precautions and utilizes disease specific precaution guidelines as per CDC guidelines., 7. Utilizes and maintains surgical instruments according to manufacturer’s recommendations and department guidelines., 8. Follows hospital safety guidelines., 9. Follows all hospital Policies and Procedures., 10. Participates and actively supports PI activities., 11. Maintains biannual CPR., 12. Completes annual education update., 13. Attends and participates in Staff Development meetings., 14. Completes at least 12 hours continuing education annually., 15. Maintains certification, if applicable., 16. Assists in orientation of new personnel to the department as well as developing skills of other staff members when requested or appropriate., 17. Completes in‐services and self‐learn education programs as required., 18. Rotates as needed on all shifts and days as requested; regularly demonstrates flexibility on an “on‐call” basis., 19. Demonstrates good judgement and planning when responding to requests or questions while interacting with physicians, patients, and families., 20. Responds to schedule/assignment changes quickly., 21. Consistently shows good judgement by showing an appreciation of cost and quality., 22. Reports any changes in the patient’s condition to appropriate personnel., 23. Refers unsolved problems and consults with the appropriate person in order to pursue problem resolution through proper chain of command., 24. Respects, at all times, the confidentiality of patient’s records, the progress, and utilizes complete discretion when discussing patient matters., 25. Displays confidence and shows respect to patients, families, physicians, and other health care workers by performing job related duties in a highly professional manner at all times., 26. Readily assists, supervises, delegates or consults with other staff members when requested or appropriate. Requests assistance from others as needed., 27. Displays positive attitude/working relationships toward all internal and external customers., 28. Demonstrates ability and judgement to coordinate simultaneous work requirements. Completes all scheduled assignments without sacrificing quality of care performed., 29. Willing to accept additional responsibilities and duties related to the operation of the department as permitted., 30. Performs duties in an independent manner with little or no direct supervision., 31. Schedules benefit time appropriately. Acceptable attendance practices., 32. Provides timely notification for absence or tardiness (2 hours)., 33. Takes appropriate breaks and returns promptly., 34. Observes hospital dress code: wears identification badge while on duty and maintains a professional appearance at all times., 35. Consistently strives to be an effective and productive member of the department and of the organization., 36. Performs other duties as assigned. Rev: 2/23/26 Payrate: $28.41 to $41.80

Job Description Job description Performs administrative duties for senior level executive at our Corporate Office location. This position has access to sensitive, confidential, and strategic information. The scope and complexity of this position is such that the Executive Assistant is regularly dealing with diverse matters that require substantive knowledge of the company. Ideal candidate must be able to interact with all levels within the company, have professional appearance and demeanor, possess a strong work ethic, display good judgment, be highly organized and have the ability to work autonomously. DUTIES & RESPONSIBLITIES: • Ascertains the nature and priority of incoming phone calls and emails; accurately records messages, and transfers calls / responds to emails as necessary., • Communicates in person and through correspondence with contacts inside and outside the company such as vendors, customers, and senior leadership., • Composes correspondence; creates presentations, organizational charts; Schedules and coordinates meetings, conference calls, and other events., • Creates organizational processes., • Informs attendees of function dates and times, reserves meeting space, provides the appropriate equipment/materials., • Takes initiative on projects; appropriately researches matters as needed., • Organizes, prioritizes, and summarizes the content of incoming e-mail, materials, information, special requests, and meetings., • Coordinates schedules, which includes: scheduling meetings (in person and virtual), preparing documents and materials in advance of meetings., • Coordinates travel arrangements, including scheduling of airfare, rental cars/ drivers, hotels, dining reservations, offsite meeting arrangements., • Performing minor accounting duties., • Writing and editing emails, drafting memos, and preparing communications on the executive’s behalf, • Event Coordinator Duties, • Plan, coordinate and execute multiple events for Buffalo and Rochester throughout the years directed by the State President., • Create reliable financial reports for accounting and process payments on time.Knowledge, Skills and Abilities, • Ability to maintain a positive and professional attitude when interacting with sales associates, clients, vendors and co-workers., • Ability to communicate professionally in oral and written fashion., • Must have previous experience in an Executive Assistant position, with proven clerical, organizational, statistical and administrative skills., • Must be highly organized, detail-oriented, ability to multi-task and prioritize, take initiative, and be adaptable to changing situations., • Ability to set up virtual meetings using Zoom, WebEx and Microsoft Teams., • Ability to work with spreadsheets in Excel. Must be proficient in Word, Excel, and PowerPoint and Outlook., • Ability to approach projects with creativity and intellectual stimulation., • Ability to maintain confidentiality and operate with discretion in relation to private and confidential business matters., • Must possess good judgment and problem solving skills., • High school diploma required; Business school education and/or college coursework desirable.OTHER, • Business School, or a College degree preferred and/or at least 5 – 7 years of administrative support for senior level or C-suite., • Occasional travel may be required.The hourly rate is based on location and experience ranging from $25-$27 per hour. HowardHanna.com Hanna Holdings, Inc. affiliates and assigns are committed to providing equal employment opportunity to all employees and applicants for employment regardless of such factors as race, color, religion, sex, national origin, age, veteran's status or disability. The Company abides by all local, state and federal laws and regulations affecting the hiring of employees. Powered by JazzHR UKlJjsPtIV

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! shift schedule: 12 Hour Days: This is a day shift position, with hours from 6:00 AM to 6:00PM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. .job purpose: The Packaging Operator operates, sets up, changes over, troubleshoots, and cleans either sleeving, case packing, or palletizing equipment. This position ensures the manufactured products meet specifications, makes minor adjustments as necessary, clears any jams that may occur, and prepares the equipment for cleaning. They continuously feed various materials into the machines such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap. They adhere to food processing requirements verified by routine quality checks and maintain food safe practices for the entire duration of operation. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate moving equipment and make the appropriate adjustments within process limits in order to package accurate and defect-free cases with sleeved bottles., • Observe machine operations to ensure quality conformity to specifications and standard operating procedures for all packaged products., • Inspect packaged product throughout the process including filled bottles, sleeved bottles, formed cases, shrink wrapped cases, and full pallets to verify all meet finished specifications then adjust the process as needed while escalating issues to a supervisor., • Supply packaging equipment with materials such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap., • Periodically count and record all finished or rejected materials., • Clean the packaging equipment, ancillary tools, conveyors, and surrounding areas. Maintain the entire packaging line in audit ready condition both during and after production., • Proactively monitor the production line, packaging equipment, and surrounding conveyors to watch for any problems including backups, jams, or rejects. Efficiently resolve stoppages and continue production in a timely manner while recording all downtime reasons., • Stop and address machines when faults occur, clear machine jams, then report malfunctions to the appropriate supervisor and/or technician., • Troubleshoot problems, perform minor repairs using the correct tools, and participate in Preventive Maintenance on the packaging equipment., • Demonstrate proactive monitoring skills, using visual observation of gauges and listening to mechanical sounds to ensure equipment is functioning properly. Inform maintenance of suspected issues if unable to correct., • Aid in the training of new personnel or upskilling of team members., • Perform other duties as assigned by management. skills/qualifications required: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Basic computational skills including simple math and reasoning required., • Must be able to operate the equipment effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Packaging Operator stands throughout their shift and walks on uneven concrete or tile surfaces. They lift full packaged cases to conduct routine checks and load material onto the equipment infeed areas., • Pushing/Pulling/Bending/Stooping – The Packaging Operator pushes/pulls rolls of labels onto sleever and stacks collapsed boxes on a pallet or places into a recycling container. The Packaging Operator pushes/pulls while using brooms, dust mops, and brushes during cleanup duties. The Packaging Operator bends/stoops occasionally throughout the workday for varying lengths of time, especially to maintain the corrugate material feed level for the packer., • Squatting/Kneeling/Crawling/Twisting/Turning – The Packaging Operator may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist is used when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Packaging Operator steps on and off the platforms and climbs stairs to access equipment. The Packaging Operator reaches below and/or above shoulder level when removing or adding boxes to a pallet, loading materials, and dumping unfinished product components., • Grasping/Manipulation – The Packaging Operator will engage in frequent use of hands and fingers for pressing buttons, opening equipment doors, typing on a keyboard, clearing jams, executing changeovers, and performing quality checks. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of an absence, another employee with the same skill level will assume the duties and responsibilities as required. how fairlife nourishes you: At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential, • Rewards & recognition, matching gifts, free product, and Business Resource Groups fairlife's nour!sh program is designed to meet you where you are — supporting your individual wellbeing journey while enabling you to do your best work every day. position location: Webster, NY reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is eligible for bonus. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$24—$25 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Imagine being able to meet your leader BEFORE applying! Click the following link to meet and hear from the leader about this specific role; https://youtu.be/FGt7tEykqJA MISSION This role exists to keep critical fleet assets safe, road-ready, and productive. Maintenance technicians are essential to ensuring trucks operate with maximum reliability and safety—supporting public health, environmental responsibility, and operational excellence. This is hands-on, high-impact work where your performance directly affects what gets done, when, and how safely. WHY THIS ROLE? WHY NOW? You won’t be a number on a spreadsheet. You’ll be a named, needed member of a tight-knit crew, where your work shows up in the real world every day. Shop leads still turn wrenches. Managers still walk the floor. And teammates still show up with grit, skill, and pride in the trucks they maintain. This team believes in training the willing—not filtering for perfection. If you bring the right hands, mindset, and heart for the work, they’ll invest in your growth with real training, real trust, and real opportunity. PERFORMANCE OBJECTIVES By day 30: Complete onboarding and web-based safety/compliance training (Hydraulics 101, J1939 Diag, PPE, LOTO). Shadow lead technician on preventive maintenance (PM) routines for front-loader and roll-off trucks. Demonstrate understanding of shop layout, work order systems, and diagnostic tools (Allison, Cummins, Mack). By day 90: Independently complete scheduled PMs and minor diagnostics on at least 2 truck types. Support evening or off-shift maintenance schedules with minimal supervision. Execute basic hydraulic troubleshooting and participate in vendor-led on-site training. By day 180: Serve as a key responder for mechanical downtime within your yard assignment. Maintain uptime standards across a small fleet section with 90%+ first-time fix rate. Mentor new tech apprentices or junior techs on shop safety, tooling, and SOPs. FIT TRAITS Hands-On Learner: You absorb knowledge by doing—and improving with every rep. Culture Builder: You ask your teammates what they’re working on. You show up with respect, curiosity, and care. Grit + Growth: Whether you’ve got two years or twenty, you push to learn what’s next. Mission Aligned: You believe that clean communities and crew safety are worth the sweat. Requirements Must have served in the U.S. Army, U.S. Navy, U.S. Marine Corps, U.S. Air Force, U.S. Coast Guard, U.S. Space Force, U.S. Reserves, or U.S. National Guard. Baseline Skills: Mechanical aptitude, ability to read schematics, understanding of diesel systems. Experience: Any of the following: Military MOS in mechanical, aviation, diesel, or maintenance fields (e.g., 91B, 3521, 2T3X1). Civilian experience in heavy equipment, diesel, or fleet maintenance. Strong home/garage mechanical background + verifiable training or references. Tools: Must own or acquire personal hand tools; quarterly tool reimbursement offered. Certs (Preferred): CDL, DOT Brake Inspection, ASE certifications (not required to start). Clearance: No clearance required; must be eligible to work in the U.S. Physical: Ability to lift 50 lbs; bend, stoop, kneel; use lifts/jacks safely. Benefits BENEFITS Salary of $25 - $40/hr Monday - Friday role (rotating evening/weekend on call availability) Tool Reimbursement Program – Quarterly tool upgrades encouraged. Training Access – Vendor-led, instructor-led, and web-based technical certifications. Career Mobility – Multiple technician paths: site leadership, operations, diagnostics. People-First Culture – Tight-knit teams, real leadership access, no corporate red tape. Work-Life Balance – Predictable shifts, off-the-clock respect, local transfers possible.

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. The construction of fairlife's manufacturing facility in Webster, NY is underway. This state-of-the-art, 750k sq ft, greenfield plant is expected to be operational in late 2025 and will lay the foundation for fairlife's next phase of growth as the leading dairy nutrition provider. While coupling the industry's latest technologies and fairlife's operational excellence to build this world-class facility, fairlife plans to hire 250 new employees and bring in approximately 5 million lbs. of milk a day, with room to grow over the coming years. Join Us - Sign-On Bonus Included! shift schedule: 12 Hour Nights: This is a night shift position, with hours from 6:00 PM to 6:00 AM. The role follows a rotating 2-2-3 schedule: two days on, two days off, three days on, followed by two days off, two days on, and three days off. Team members will work every other weekend, including Friday, Saturday, and Sunday. Shift Differential of $2 per hour for night shift. .job purpose: The Packaging Operator operates, sets up, changes over, troubleshoots, and cleans either sleeving, case packing, or palletizing equipment. This position ensures the manufactured products meet specifications, makes minor adjustments as necessary, clears any jams that may occur, and prepares the equipment for cleaning. They continuously feed various materials into the machines such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap. They adhere to food processing requirements verified by routine quality checks and maintain food safe practices for the entire duration of operation. responsibilities: • Follow all safety, working, and Good Manufacturing Practices (GMP) rules., • Report to and follow the directions of the Production Supervisors., • Demonstrate the ability to safely operate moving equipment and make the appropriate adjustments within process limits in order to package accurate and defect-free cases with sleeved bottles., • Observe machine operations to ensure quality conformity to specifications and standard operating procedures for all packaged products., • Inspect packaged product throughout the process including filled bottles, sleeved bottles, formed cases, shrink wrapped cases, and full pallets to verify all meet finished specifications then adjust the process as needed while escalating issues to a supervisor., • Supply packaging equipment with materials such as sleeves, corrugate, shrink film, glue, pallets, and stretch wrap., • Periodically count and record all finished or rejected materials., • Clean the packaging equipment, ancillary tools, conveyors, and surrounding areas. Maintain the entire packaging line in audit ready condition both during and after production., • Proactively monitor the production line, packaging equipment, and surrounding conveyors to watch for any problems including backups, jams, or rejects. Efficiently resolve stoppages and continue production in a timely manner while recording all downtime reasons., • Stop and address machines when faults occur, clear machine jams, then report malfunctions to the appropriate supervisor and/or technician., • Troubleshoot problems, perform minor repairs using the correct tools, and participate in Preventive Maintenance on the packaging equipment., • Demonstrate proactive monitoring skills, using visual observation of gauges and listening to mechanical sounds to ensure equipment is functioning properly. Inform maintenance of suspected issues if unable to correct., • Aid in the training of new personnel or upskilling of team members., • Perform other duties as assigned by management. skills/qualifications required: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be provided to enable individuals to perform the essential functions. • A High School diploma or General Education Degree (GED) required., • Strong verbal and written communication skills., • Basic computational skills including simple math and reasoning required., • Must be able to operate the equipment effectively after the appropriate training period., • Must have the ability to troubleshoot small problems and escalate accordingly for those requiring additional expertise., • Must work in a safe, efficient manner while adhering to all safety procedures., • Must possess or be able to obtain an Industrial Truck Operator License., • Ability to handle ambiguity and work in a fast paced, entrepreneurial environment., • Proficiency in English: Comfortable with both written and verbal communication, including reading and writing. working conditions and physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Sitting/Standing/Walking/Lifting/Carrying – The Packaging Operator stands throughout their shift and walks on uneven concrete or tile surfaces. They lift full packaged cases to conduct routine checks and load material onto the equipment infeed areas., • Pushing/Pulling/Bending/Stooping – The Packaging Operator pushes/pulls rolls of labels onto sleever and stacks collapsed boxes on a pallet or places into a recycling container. The Packaging Operator pushes/pulls while using brooms, dust mops, and brushes during cleanup duties. The Packaging Operator bends/stoops occasionally throughout the workday for varying lengths of time, especially to maintain the corrugate material feed level for the packer., • Squatting/Kneeling/Crawling/Twisting/Turning – The Packaging Operator may squat to pick up product from the floor, or during various cleanup duties. There will be occasional twisting and turning at the waist is used when loading material, or when performing routine responsibilities., • Climbing/Balancing/Reaching – The Packaging Operator steps on and off the platforms and climbs stairs to access equipment. The Packaging Operator reaches below and/or above shoulder level when removing or adding boxes to a pallet, loading materials, and dumping unfinished product components., • Grasping/Manipulation – The Packaging Operator will engage in frequent use of hands and fingers for pressing buttons, opening equipment doors, typing on a keyboard, clearing jams, executing changeovers, and performing quality checks. food safety requirements: • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer, and/or Government requirements and standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to food safety and the quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to food safety and the quality of ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming products in terms of food safety and quality issues until the deficiency or unsatisfactory condition has been corrected., • In the event of an absence, another employee with the same skill level will assume the duties and responsibilities as required. how fairlife nourishes you: At fairlife, we believe in better — and that includes how we support our people. We offer a comprehensive suite of benefits and wellbeing resources designed to support you physically, emotionally, socially, and financially, both in and out of work. • Comprehensive medical, dental, and vision coverage, effective day one!, • Supplemental health plans (hospital indemnity, accident, and critical illness insurance), • Paid Time Off to recharge and support work-life balance, • Paid parental leave & adoption assistance (up to $10,000), • Parental support & family care benefits, including childcare resources and lactation support, • 401(k) to support retirement planning with up to 9% in employer match, • Wellness reimbursement (up to $500 for qualified wellbeing expenses), • Employee Assistance Program (EAP) for emotional wellbeing and work-life support, • Company-paid life insurance and short-term disability, • Employer HSA funding (for HDHP participants), • Tuition reimbursement (up to $10,000) and student loan repayment ($200/month), • Learning & development programs to unlock your full potential, • Rewards & recognition, matching gifts, free product, and Business Resource Groups fairlife's nour!sh program is designed to meet you where you are — supporting your individual wellbeing journey while enabling you to do your best work every day. position location: Webster, NY reports to: Packaging Supervisor travel requirements: little to none exempt/nonexempt: nonexempt This position is eligible for bonus. *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$24—$25 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email careers@fairlife.com. For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.