Part time engineering jobs in Fort Worth, TexasCreate job alerts

Location: Main Hospital Bldg - 2nd Floor Full time, benefitted weekend overnight position : Fri/ Sat/Sun 18:15 pm to 7:15 am; weekend and overnights shift differentials will apply. Primary Purpose Education • Must have American Registry of Radiologic Technologists (ARRT) with certification in Radiography (R) within 3 months of hire., • Must have a Texas Department of State Health Services (TDSHS) - Medical Radiologic Technologist (MRT) certification 6 months of hire., • Must have a current Healthcare Provider (BLS Level) CPR course completion card from one of the following:, • American Heart Association, • American Red Cross Rescuer, • Must be able to demonstrate time management, organizational, and interpersonal skills., • Must be able to demonstrate oral and written communication skills., • Must be able to demonstrate knowledge of Radiologic equipment., • Responsible for production quality radiographs of basic and intermediately complex exams/procedures, while adapting procedures and technical factors in relation to patient conditions and history. Participates in quality review program. Responsible for understanding and adhering to radiation safety regulations and infection control standards established by Parkland and accreditation agencies to ensure that Radiologic procedures are carried out safely., • Utilizes technical knowledge and skills to perform procedures accurately and in a timely manner in accordance with age specific criteria. Completes exam charges and image documentation in a timely manner. Administers contrast material in the correct dosage, route and observes patients for adverse reactions. Enters accurate patient exam data into the electronic health record. Responsible for equipment, supplies, and room preparation in order to ensure appropriate set-up before each procedure., • Interviews patient (two patient identifier), conducts patient screening (when applicable) and obtains medical history pertaining to procedure's clinical criteria. Explains procedure and instructs patient on necessary requirements needed to provide diagnostic images. Answers questions/screening concerning procedures and contrast for relevant exams. Assists the physician as needed in performing procedures. Ensures that images and records are properly completed with patient identification data and appropriate labeling., • Maintains equipment including running quality assurance checks and notifying supervisor of maintenance needs. Maintains a record of quality assurance tests to ensure that equipment runs efficiently and effectively. Maintains all passwords to each computer system. Promptly reports equipment malfunctions to supervisor or the appropriate engineering department., • Transports patients to and from radiographic area as needed and consults with physicians or other healthcare providers regarding x-ray orders, performed procedures, and protocol to ensure that radiographic needs are met., • Participates in departmental Performance Improvement Programs, promotes Parkland Health mission, vision, values, and its relationship to the work environment, attends modality meetings satisfactorily. Functions in the department as part of an interdisciplinary team and collaborates in the care and service delivery process of patient care through effective communication with other service lines. Prioritizes exams with scheduling exams to ensure smooth workflow, minimize wait times and address stat and urgent requests., • Responds to inquiries, calls, emails in a timely and professional manner. Communicates shift hand off regarding workflow issues with equipment or pending exams with oncoming staff. Engages in equitable distribution of departmental workloads. Serves as a resource and role model to other staff and team members., • Takes responsibility for own professional growth and development by maintaining ARRT and State licensure. Completes mandatory Parkland training. Integrates knowledge gained into current work practices., • Meets the minimum requirements of the department PRN requirements to sustain PRN status. Requisition ID: 986405

Job DescriptionLocation: Fort Worth RMX TX Job Req ID: 14721 Join our amazing team and contribute as a: Plant Maintenance Technician ABOUT THE ROLE Amrize is hiring a full-time Ready Mix Plant Maintenance Technician for the DFW Ready Mix Plants. WHAT YOU'LL ACCOMPLISH • Maintains, inspects, repairs, moves, and/or installs plant machinery and equipment in accordance with instructions, equipment manuals, etc. May perform maintenance on plant buildings as well; Assures compliance with environmental and safety regulations., • Schedules and performs preventative maintenance on plant equipment such as crushers, conveyor belts, pulleys, pumps, screens, and screen bearings by following the manufacturer's recommended service intervals and internal equipment reliability experience., • Inspection of condition and operation of plant equipment and perform necessary repairs and adjustments., • Move and install plants following engineering plans and specifications; guide less experienced mechanics., • Disassembles and repairs production equipment by replacing worn or broken parts, including bearings, rollers, motors, controls, etc., • Performs maintenance on building and other related work as assigned., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors., • Other duties as assigned. WHAT WE'RE LOOKING FOR • High school diploma or equivalent, • 2-3 years of specialized training in technical school, apprenticeship, or manufacturers' training program, • 3-4 years experience in mechanical repair, installation, and construction in a plant or industrial environment, • Must have a working knowledge of basic electrical, mechanical, hydraulic, and pneumatic systems as well as the use of all shop equipment, such as welding and machining equipment Additional Requirements: • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Description Sr. Automation & Controls Supervisor ABOUT GOLDEN STATE FOODS Golden State Foods is a distinguished leader in the foodservice industry, offering an extensive array of products and services to a diverse clientele. Rooted in the values of quality service and integrity, we are dedicated to creating a supportive and inclusive atmosphere where employees can advance, innovate, and contribute to our ongoing success. ABOUT THE JOB The Sr Automation & Controls Supervisor coordinates Engineering functions and people covering all aspects of electrical and automation engineering in the factory. Technical expertise to include electrical distribution, instrumentation and automation, as well as knowledge of MES (Manufacturing Execution System), Digital solutions, food processing and technology and project management. Sets overall strategic and tactical direction for the E&A and maintenance department in subject area of expertise, with focus on people and product safety, reliability, sustainability, compliance and business objectives. Actively participate on the planning and support/delivery of capital investment project WHAT YOU'LL DO • Support building Automation & Controls and electro-mechanical skill capability: Ensures that personnel managing, operating and maintaining equipment and infrastructure are competent to do so safely and efficiently. Ensures that competency assessment and competency building plans are in place, routinely reviewed and executed in the factory., • Deliver Process Improvements: Have a deep insight of the production processes (Process Mastership), and continuously strive for the improvement of quality, safety or efficiency while protecting the technological know-how and competitive advantage., • Operate and Maintain: Participates in the implementation and execution of maintenance strategy, tools and methodologies at site level. Ensures safe and reliable operation of electrical systems, instrumentation, process and supervisory control, and manufacturing execution systems (MES). Implement digital technologies to drive reliability and process improvements., • Manage Risk and Compliance: Ensures that all installations comply with market and corporate safety, health, environment, product safety and product quality standards. Ensures that the key documentation is up to date and in place (e.g. electrical drawings, automation documentation and backups, maintenance plans, etc.). Ensure that the Management of Change is in place to appropriately manage modifications involving relevant systems., • Drive Sustainability: Actively participate on the factory sustainability objectives, define priorities, develop and operationalize the strategy to generate energy and water savings. Track and report results coming from any improvement projects, even from the ones that are not specifically related to sustainability., • Manage factory asset portfolio: Ensures a strategy is in place to anticipate asset end-of-life, obsolescence and replacement requirements, without compromising asset performance and cost competitiveness. Ensures timely stakeholder awareness for capital planning purposes., • Excel in Industrialization: Participates in all Capital Investments projects in the factory that involves the area, ensuring that the technical solution follows corporate and market standards and is delivered with the expected quality, being on time and on budget. WHAT YOU'LL NEED • Minimum 5 years' experience with Automation and / or MES engineer with Electrical experience (as Project Engineer, Project Manager or Factory MES-E&A Engineer), • Experience in managing/direct supervision of technical teams, contractors or other 3rd parties, • Experience on delivering technical trainings, • Ability to read and comprehend simple to complex instructions, correspondence, and memos., • Ability to write simple to complex correspondence., • Ability to effectively present information in one-on-one and group situations to customers, clients, and other team members of the organization., • Ability to use effective problem-solving skills. PHYSICAL REQUIREMENTS: • Ability to wear personal protective equipment and/or clothing., • Sit 8 or more hours per day., • Stand/walk 7 or more hours per day., • Frequently bend, reach, twist/turn and climb., • Occasionally squat., • Occasionally lift up to 50 lbs. from floor to shoulder and carry 30 feet., • Specific vision abilities required by this job include close vision, distance vision, and color vision. ENVIRONMENTAL/ATMOSPHERIC CONDITIONS: • Constantly work in damp, wet, humid and slippery environments., • Constantly work near moving equipment with fumes or airborne debris., • Constantly work in extreme heat/cold., • Constantly work in high noise levels requiring hearing protection., • Occasionally work in high places., • Occasionally work with toxic or caustic chemicals. MACHINES/TOOLS/EQUIPMENT/SOFTWARE: • Bump cap, hair net, safety glasses, hearing protection, and uniform or smock., • Knife and small hand tools. LEADERSHIP/MANAGEMENT RESPONSIBILITY • Yes, small team of maintenance associates Education & Experience • Bachelor's Degree in Electrical Engineering or equivalent, strongly preferred OR 5+ of applicable experience in lieu of a degree WHAT YOU’LL GET • People First: At Golden State Foods, we're not just a company; we're a dynamic community where your talents are celebrated, and your ambitions are nurtured., • Values Driven: Our core values drive everything we do, creating a culture of innovation, integrity, and excellence. But we're not content with just being great; we strive for greatness in every aspect of our work., • People Development: At GSF we strive to continually develop our people to prepare us all for the needs of tomorrow., • Philanthropy & Sustainability: We're committed to making a difference beyond our walls through philanthropy and sustainability efforts across all our locations around the globe., • Extensive Benefits: Golden State Foods believes in a holistic approach to wellness focusing on the whole person with benefits that support those needs. Equal Opportunity Employer: We’re proud to be an equal opportunity employer. Golden State Foods values diverse perspectives and is committed to creating an inclusive workplace where every person can thrive - respected, supported, and empowered. We believe diversity, in every form, strengthens our team and our communities.

Are you ready to explore a world of possibilities, both at work and during your time off? Join our American Airlines family, and you’ll travel the world, grow your expertise and become the best version of you. As you embark on a new journey, you’ll tackle challenges with flexibility and grace, learning new skills and advancing your career while having the time of your life. Feel free to enrich both your personal and work life and hop on board! The Sr. Manager, Continuous Improvement plays a key leadership role in shaping how American Airlines delivers reliable, efficient, and customer centric operations across airports and contact centers. Leading a team of process improvement professionals, this role transforms complex operational challenges into streamlined, scalable solutions that directly impact both employee effectiveness and the customer experience. As noted above, this list is intended to reflect the current job but there may be additional essential functions (and certainly non-essential job functions) that are not referenced. Management will modify the job or require other tasks be performed whenever it is deemed appropriate to do so, observing, of course, any legal obligations including any collective bargaining obligations. • Provide strategic leadership and direction to a team of analysts and a manager focused on continuous improvement across airport and contact center operations., • Set the vision, priorities, and roadmap for process improvement initiatives aligned to enterprise goals, operational strategy, and customer experience objectives., • Lead multiple, concurrent, and time‑sensitive initiatives from concept through implementation and sustainment, ensuring measurable and sustainable results., • Partner cross‑functionally with Airport Operations, Contact Centers, Skyview, Workforce Planning, Technology, and other enterprise teams to design integrated solutions., • Drive optimization strategies related to staffing models, facility layouts, workflows, ground time, service recovery, and misconnect performance., • Establish standard work, governance, and performance measures to ensure improvements are scalable, repeatable, and aligned with enterprise standards., • Influence and gain alignment with leaders at all levels by clearly articulating the “why,” expected outcomes, and operational impacts of change., • Champion continuous improvement methodologies (Lean, Six Sigma, data‑driven problem solving) and embed CI thinking into day‑to‑day operations., • Develop future leaders by coaching, mentoring, and providing growth opportunities for team members., • Monitor performance metrics, assess risks, and proactively adjust strategies to ensure delivery of operational and financial benefits., • Travel up to 40% of the time to support airport and contact center engagements, pilots, and implementations. Minimum Qualifications- Education & Prior Job Experience • Bachelor’s degree in Industrial Engineering, Business, Operations, or a related field, or equivalent experience/training., • 7+ years of professional experience in continuous improvement, operations, industrial engineering, or a related field. Preferred Qualifications- Education & Prior Job Experience • Master’s degree (MBA, MS in Industrial Engineering, or related field)., • 4+ years of experience formally or informally leading teams and/or large‑scale process improvement initiatives. Skills, Licenses & Certifications • Experience working with and presenting to senior leaders and executive‑level stakeholders. • Strong leadership and organizational skills with the ability to set direction, delegate effectively, and drive results., • Expertise in continuous improvement methodologies (Lean, Six Sigma, process redesign)., • Excellent quantitative, analytical, and problem‑solving skills., • Proficiency in Microsoft Office tools, including Excel, PowerPoint, Word, Access, and Power Apps., • Ability to operate independently, manage competing priorities, and thrive in a dynamic, fast‑paced environment., • Exceptional written and verbal communication skills across all levels of the organization., • Lean Six Sigma Black Belt certification., • Demonstrated ability to influence decisions and lead through ambiguity., • Experience developing future leaders and building succession pipelines. • Travel Perks: Ready to explore the world? You, your family and your friends can reach 365 destinations on more than 6,800 daily flights across our global network., • Health Benefits: On day one, you’ll have access to your health, dental, prescription and vision benefits to help you stay well. And that’s just the start, we also offer virtual doctor visits, flexible spending accounts and more., • Wellness Programs: We want you to be the best version of yourself – that’s why our wellness programs provide you with all the right tools, resources and support you need., • 401(k) Program: Available upon hire and, depending on the workgroup, employer contributions to your 401(k) program are available after one year. Are you ready to feel a tremendous sense of pride and satisfaction as you do your part to keep the largest airline in the world running smoothly as we care for people on life’s journey? Feel free to be yourself at American.

Are you ready to explore a world of possibilities, both at work and during your time off? Join our American Airlines family, and you’ll travel the world, grow your expertise and become the best version of you. As you embark on a new journey, you’ll tackle challenges with flexibility and grace, learning new skills and advancing your career while having the time of your life. Feel free to enrich both your personal and work life and hop on board! As one diverse, high-performing team dedicated to technical excellence, you will focus relentlessly on delivering unrivaled digital products that drive a more reliable and profitable airline. In the Cybersecurity Operations domain you will be responsible for the cyber defense of technology assets by managing daily activities, threat detection and incident response, security tool implementation, and team development. You will be expected to balance technical oversight, and business alignment to keep the organization’s digital assets safe while ensuring the team is empowered, the systems are resilient, and the entire operation runs smoothly, effectively, and proactively. Additional information about the skills needed for this position is listed in the Skills, Licenses & Certifications section below. As noted above, this list is intended to reflect the current job but there may be additional essential functions (and certainly non-essential job functions) that are not referenced. Management will modify the job or require other tasks be performed whenever it is deemed appropriate to do so, observing, of course, any legal obligations including any collective bargaining obligations. • Work closely with senior leadership, project managers, and stakeholders to align cybersecurity initiatives with corporate objectives and ensure successful project delivery., • Clearly convey project risks and strategies to senior management and stakeholders, ensuring transparency and informed decision-making., • Ensure adherence to cybersecurity standards and regulations, providing regular reports on security practices and compliance to stakeholders., • Oversee the integration of physical security measures with cybersecurity protocols to ensure comprehensive protection and monitoring of our infrastructure., • Effectively coordinate resources and manage project progress, addressing issues and risks to ensure successful delivery., • Develop and implement strategies for secure communication protocols to protect sensitive data and ensure the integrity cybersecurity systems., • Oversee the operations of the SOC, ensuring it is equipped with the latest tools, technologies, and processes to effectively monitor and respond to security threats., • Communicate critical security operations risks, strategies, and incident statuses to executive leadership, and prepare detailed performance reports with insights on compliance, effectiveness, and KPIs., • Develop and implement strategies and governance frameworks for security operations, ensuring alignment with organizational goals and regulatory compliance., • Mentor a team of cybersecurity professionals within the security operations domain, fostering a culture of excellence and continuous improvement through targeted training and development opportunities., • Oversee and guide the planning, execution, and delivery of cybersecurity projects and initiatives, ensuring alignment with corporate objectives., • Bachelor's degree in Computer Science, Computer Engineering, Technology, Information Systems (CIS/MIS), Engineering, or a related technical discipline, or equivalent experience/training. Extensive job experience in cybersecurity architecture or a related field is required, with a proven track record of designing and implementing secure IT architecture and frameworks. Demonstrated expertise in leading architectural design and strategic oversight in cybersecurity initiatives., • Bachelor’s degree in Information Technology, Computer Science, Cybersecurity, or a related field; advanced degree preferred., • 5+ years’ experience in cybersecurity architecture or related roles., • Experience designing and implementing comprehensive security architectures and frameworks., • Familiarity with cloud platforms (e.g., AWS, Azure, Google Cloud) and their security features., • Relevant certifications including but not limited to Certified Information Systems Security Professional (CISSP); Certified Information Security Manager (CISM); Certified Incident Handler (GCIH); Certified Information Systems Auditor (CISA); Certified Ethical Hacker (CEH); CompTIA Security+; Certified SOC Analyst (CSA), • Proficiency in security operations technologies and tools (e.g., SIEM, IDS/IPS, EDR), • Expertise in incident response and handling procedures, • Knowledge of threat intelligence and threat hunting methodologies, • Understanding of network security principles and practices, • Familiarity with security frameworks and standards (e.g., NIST, ISO 27001), • Ability to analyze security events and incidents to identify root causes and mitigation strategies, • Strong problem-solving skills to address security challenges and incidents, • Excellent written and verbal communication skills to articulate security concepts and solutions to technical and non-technical stakeholders, • Ability to collaborate effectively with cross-functional teams, • Travel Perks: Ready to explore the world? You, your family and your friends can reach 365 destinations on more than 6,800 daily flights across our global network., • Health Benefits: On day one, you’ll have access to your health, dental, prescription and vision benefits to help you stay well. And that’s just the start, we also offer virtual doctor visits, flexible spending accounts and more., • Wellness Programs: We want you to be the best version of yourself – that’s why our wellness programs provide you with all the right tools, resources and support you need., • 401(k) Program: Available upon hire and, depending on the workgroup, employer contributions to your 401(k) program are available after one year. Are you ready to feel a tremendous sense of pride and satisfaction as you do your part to keep the largest airline in the world running smoothly as we care for people on life’s journey? Feel free to be yourself at American.

Are you ready to explore a world of possibilities, both at work and during your time off? Join our American Airlines family, and you’ll travel the world, grow your expertise and become the best version of you. As you embark on a new journey, you’ll tackle challenges with flexibility and grace, learning new skills and advancing your career while having the time of your life. Feel free to enrich both your personal and work life and hop on board! The Director, Revenue Management – Continuous Improvement & Innovation is a senior leadership role within the Revenue Management organization. This position is responsible for transforming how Revenue Management work is designed, executed, and scaled by embedding continuous improvement, innovation, and advanced analytics into daily operations. This role leads process improvement and innovation initiatives that accelerates decision-making, and drives measurable efficiency and revenue impact. The Director partners closely with Pricing, Yield Management, Revenue Engineering, IT, Finance, and external vendors to modernize workflows and develop AI-enabled solutions—including GenAI and agentic AI—as core Revenue Management capabilities. This list is intended to reflect the current job but there may be additional essential functions (and certainly non-essential job functions) that are not referenced. Management will modify the job or require other tasks be performed whenever it is deemed appropriate to do so, observing, of course, any legal obligations including any collective bargaining obligations. Leadership & Operating Model Transformation • Lead enterprise‑wide continuous improvement initiatives across Revenue Management, focusing on speed to insight, execution consistency, and scalable impact, • Redesign end‑to‑end RM workflows to reduce manual effort, eliminate waste, and elevate analytical and commercial judgment, • Own the innovation roadmap for Revenue Management processes, tools, and operating models, • Drive the development and deployment of GenAI, agentic AI, ML, and automation‑powered solutions that transform RM workflows, • Partner with Revenue Engineering and IT to translate business needs into technical design, development plans, and production‑ready solutions, • Work closely with Pricing, Yield Management, Finance, Commercial, and Technology teams to deliver cross‑functional solutions requiring alignment across data, systems, and processes, • Serve as a trusted advisor to senior Revenue and Commercial leaders on process design, capability building, and innovation strategy, • Identify, evaluate, and manage external vendors and technology partners to accelerate CI and innovation outcomes, • Ensure vendor solutions are outcome‑driven, scalable, cost‑effective, and integrated into core RM workflows, • Build, lead, and develop a high‑performing Continuous Improvement & Innovation team, • Set clear expectations, coach leaders, and create strong development pathways aligned to evolving analytical and AI skill needs, • Bachelor’s degree in Business, Economics, Engineering, Analytics, Computer Science, Statistics, Operations Research, or a related field, or equivalent experience/training, • 7 years of progressive leadership experience, including leading managers and senior individual contributors, • 10 years of experience in revenue management, analytics, strategy, process improvement, or transformation roles within complex, data‑intensive environments, • Demonstrated success leading large, cross‑functional initiatives with measurable business impact, • Experience working closely with technology and engineering teams on advanced analytics, automation, or AI‑enabled solutions Preferred Qualifications – Education & Prior Job Experience • MBA or other advanced degree, • Prior experience within airlines, travel, transportation, e‑commerce, consulting, finance, or technology‑driven organizations, • Experience establishing or scaling a Continuous Improvement, Analytics, or Innovation Center of Excellence Skills, Licenses, and Certifications • Demonstrates the highest standards of personal ethics and integrity, • Demonstrated experience leveraging AI, ML, GenAI, and agentic AI to redesign business processes and operating models, • Strong understanding of process improvement methodologies (Lean, Six Sigma, or equivalent), applied pragmatically, • Ability to guide complex initiatives through agile, iterative development cycles, • Ability to think strategically, negotiate skillfully, digest complex details, and use sound judgment and initiative in making decisions, • Excellent analytical, problem solving, and critical thinking ability, • Excellent project planning and organizational skills, with ability to thrive in a fast-paced environment with multiple priorities while maintaining high attention to detail and follow-through, • Ability to influence through outstanding interpersonal, collaboration, and negotiation skills, • Strong skills in stakeholder management and internal evangelism, as well as proven ability to build and facilitate relationships at all levels of the organization, both internally and externally, • Travel Perks: Ready to explore the world? You, your family and your friends can reach 365 destinations on more than 6,800 daily flights across our global network., • Health Benefits: On day one, you’ll have access to your health, dental, prescription and vision benefits to help you stay well. And that’s just the start, we also offer virtual doctor visits, flexible spending accounts and more., • Wellness Programs: We want you to be the best version of yourself – that’s why our wellness programs provide you with all the right tools, resources and support you need., • 401(k) Program: Available upon hire and, depending on the workgroup, employer contributions to your 401(k) program are available after one year. Are you ready to feel a tremendous sense of pride and satisfaction as you do your part to keep the largest airline in the world running smoothly as we care for people on life’s journey? Feel free to be yourself at American.

Are you ready to explore a world of possibilities, both at work and during your time off? Join our American Airlines family, and you’ll travel the world, grow your expertise and become the best version of you. As you embark on a new journey, you’ll tackle challenges with flexibility and grace, learning new skills and advancing your career while having the time of your life. Feel free to enrich both your personal and work life and hop on board! • This job is responsible for helping to create and promote a cross-functional learning organization and continuous improvement culture by leveraging advanced analytics., • The role is a part of the IOC Performance Analytics team within our Integrated Operations Division., • Applies advanced data and analytics skills to implement the IOC vision for an industry-leading analytics capability to assess performance and improve decision making, • Creates compelling and holistic data stories for communicating and visualizing insights around operational disruptions, • Researches current practices and industry trends and keeps abreast of latest advances in Cloud-based data analytics to solve complex airline operations problems, • Collaborates with airports, government agencies, research institutions, and business partners to enhance and accelerate the IOC Performance Analytics vision, • Establishes connections with all levels and job functions within the IOC organization, from front-line team members to senior leadership to gain valuable insights into opportunities, data, people, and processes, • Collaborates with IT Data Engineering Teams to expand our data lake of airline operational data; explore and engineer innovative data sources into self-service data lake patterns, • Acts as an agent of change to help establish American Airlines as an industry leader in operational performance and continuous improvement, • Participates in a variety of performance management projects, developing and measuring KPIs to measure and improve performance of IOC decision makers. Minimum Qualifications- Education & Prior Job Experience • Bachelor’s degree in a quantitative discipline (Operations Research, Data Science, Industrial Engineering, Computer Science, Decision Sciences, Statistics, etc.), • Expertise in at least one computer programming/scripting language (e.g. Python, R, Java, C++) and experience using data analytics software tools to analyze large data sets, • Expertise in at least one data visualization tool (e.g. Tableau, PowerBI), • Practical experience in data extraction, cleansing, analysis, and visualization, • Practical experience with Big Data,Data Lake, and Cloud technologies Preferred Qualifications- Education & Prior Job Experience • Master’s degree in a quantitative discipline (Operations Research, Data Science, Industrial Engineering, Computer Science, Decision Sciences, Statistics, etc.), • Familiarity with Microsoft Azure and Databricks platforms, • Experience with visualization design and UX, • 2-5 years of experience in a technical/quantitative professional environment, • Experience with KPI development and management metrics for individual and team performance, • Travel Perks: Ready to explore the world? You, your family and your friends can reach 365 destinations on more than 6,800 daily flights across our global network., • Health Benefits: On day one, you’ll have access to your health, dental, prescription and vision benefits to help you stay well. And that’s just the start, we also offer virtual doctor visits, flexible spending accounts and more., • Wellness Programs: We want you to be the best version of yourself – that’s why our wellness programs provide you with all the right tools, resources and support you need., • 401(k) Program: Available upon hire and, depending on the workgroup, employer contributions to your 401(k) program are available after one year. Are you ready to feel a tremendous sense of pride and satisfaction as you do your part to keep the largest airline in the world running smoothly as we care for people on life’s journey? Feel free to be yourself at American.

Are you ready to explore a world of possibilities, both at work and during your time off? Join our American Airlines family, and you’ll travel the world, grow your expertise and become the best version of you. As you embark on a new journey, you’ll tackle challenges with flexibility and grace, learning new skills and advancing your career while having the time of your life. Feel free to enrich both your personal and work life and hop on board! • The Airport Operations Planning team is the analytical engine that powers workforce & ground service equipment decisions for our airport teams. This highly analytical position leads a diverse team of analysts specializing in manpower modelling, frontline bidding, data collection, and financial forecasting., • Our team works directly with operations leadership & various other departments to ensure the airports are provided with the right resources required to achieve our performance goals., • Lead a team of analysts responsible for developing and implementing frontline union bids, • Work closely with airport leaders as they make headcount decisions driven by schedule changes, peak demand seasons, flex dates, etc, • Get to know our airport leaders by spending time in their operation and being able to translate their needs via workforce tools & technology, • Provide team of analysts with structure, support, and most importantly, care, • Work collaboratively with other operational, airport, and customer planning groups to understand their staffing needs and constraints, • Bachelor's degree / Master's degree in Aviation, Mathematics, Statistics, Finance, Industrial Engineering or related technical field or equivalent experience/training, • Travel Perks: Ready to explore the world? You, your family and your friends can reach 365 destinations on more than 6,800 daily flights across our global network., • Health Benefits: On day one, you’ll have access to your health, dental, prescription and vision benefits to help you stay well. And that’s just the start, we also offer virtual doctor visits, flexible spending accounts and more., • Wellness Programs: We want you to be the best version of yourself – that’s why our wellness programs provide you with all the right tools, resources and support you need., • 401(k) Program: Available upon hire and, depending on the workgroup, employer contributions to your 401(k) program are available after one year. Are you ready to feel a tremendous sense of pride and satisfaction as you do your part to keep the largest airline in the world running smoothly as we care for people on life’s journey? Feel free to be yourself at American

Are you ready to explore a world of possibilities, both at work and during your time off? Join our American Airlines family, and you’ll travel the world, grow your expertise and become the best version of you. As you embark on a new journey, you’ll tackle challenges with flexibility and grace, learning new skills and advancing your career while having the time of your life. Feel free to enrich both your personal and work life and hop on board • We are responsible for process standardization and capacity modelling. As noted above, this list is intended to reflect the current job but there may be additional essential functions (and certainly non-essential job functions) that are not referenced. Management will modify the job or require other tasks be performed whenever it is deemed appropriate to do so, observing, of course, any legal obligations including any collective bargaining obligations. • Develops and maintains airport staffing models to analyze staffing requirements and work closely with Financial Planning & Controller groups to provide accurate headcount forecasts, • Identifies, analyzes and recommends solutions to airport resource issues and build strategies to optimize staffing efficiencies, • Evaluates the financial and customer experience implications of strategic projects such as capital expenditures, contract proposals, process improvements, and technology changes as it relates to staffing, • Works closely with airport leadership to provide support and evaluate changes to staffing practices, • Uses qualitative and quantitative observations/data to develop capacity model requirements to be used to feed staffing models, • Basic understanding of lean six sigma and continuous improvement to identify process improvement opportunities, • Manages standardization of processes at the airports in alignment with the model(s), • Minimum Qualifications- Education & Prior Job Experience, • 2+ years of related experience in an airline or aviation consulting firm as an analyst in operations, finance, or corporate development, • BS/BA degree in a related field - preferably in engineering, business, mathematics, or economics, • Expert in Excel and PowerPoint, • Motivated professional that is capable of managing a heavy workload while prioritizing complex tasks, • An agile, self-starter with the ability to deal with ambiguity, • Adapts well in fast-paced/changing environments, • Shows up every day with a high can-do attitude and energy, • Preferred Qualifications- Education & Prior Job Experience, • Ability to pull and manipulate large sets of data using SQL or Python Experience, • Working with union or frontline level employees, • Skills, Licenses & Certifications, • Travel Perks: Ready to explore the world? You, your family and your friends can reach 365 destinations on more than 6,800 daily flights across our global network., • Health Benefits: On day one, you’ll have access to your health, dental, prescription and vision benefits to help you stay well. And that’s just the start, we also offer virtual doctor visits, flexible spending accounts and more., • Wellness Programs: We want you to be the best version of yourself – that’s why our wellness programs provide you with all the right tools, resources and support you need., • 401(k) Program: Available upon hire and, depending on the workgroup, employer contributions to your 401(k) program are available after one year. Are you ready to feel a tremendous sense of pride and satisfaction as you do your part to keep the largest airline in the world running smoothly as we care for people on life’s journey? Feel free to be yourself at American.

Are you ready to explore a world of possibilities, both at work and during your time off? Join our American Airlines family, and you’ll travel the world, grow your expertise and become the best version of you. As you embark on a new journey, you’ll tackle challenges with flexibility and grace, learning new skills and advancing your career while having the time of your life. Feel free to enrich both your personal and work life and hop on board! • This job is a member of the Integrated Operation Team within the Integrated Operations Division., • This job provides Flight Operations support in the areas of performance data and publications, weight and balance, route and payload studies and performance data automation., • Analyzes airport runway information required to create takeoff performance data, • Creates and analyzes Engine-Inoperative Special Turn Procedures for airport runways requiring special departure considerations; coordinate with appropriate Flight Operations personnel to ensure the viability of proposed procedures, • Analyzes mission capabilities for specific city pairs, • Performs weight & balance analysis and maintains aircraft weight records as required, • Creates and loads data required for use of dispatch systems and other support systems, • Creates data required for the Flight Manual (FM) and Performance Handbook (PH), • Responds to queries by pilots, dispatchers, load agents and operations planning personnel as required, • Responsible for handling aircraft engineering and analysis efforts for operations groups and participating in departmental technology projects, • Provides technical support duties for a fleet of aircraft and will act as business unit coordinator for applications development, • Monitors aircraft performance and related databases, data mining & analysis, developing business case for technology projects, identifying customer requirements, sourcing testing and quality assurance tools, and documentation, • Bachelor's Degree in Engineering, • Masters degree in Engineering, • 5+ years of experience in aircraft performance or weight & balance engineering, • Experience with Airbus and Boeing performance programs, • Experience with database and programming software, • Ability to effectively communicate operational topics to other employees as well as with manufacturing representatives, • Travel Perks: Ready to explore the world? You, your family and your friends can reach 365 destinations on more than 6,800 daily flights across our global network., • Health Benefits: On day one, you’ll have access to your health, dental, prescription and vision benefits to help you stay well. And that’s just the start, we also offer virtual doctor visits, flexible spending accounts and more., • Wellness Programs: We want you to be the best version of yourself – that’s why our wellness programs provide you with all the right tools, resources and support you need., • 401(k) Program: Available upon hire and, depending on the workgroup, employer contributions to your 401(k) program are available after one year. Are you ready to feel a tremendous sense of pride and satisfaction as you do your part to keep the largest airline in the world running smoothly as we care for people on life’s journey? Feel free to be yourself at American.

Job DescriptionSalary: 25-45 Handling Systems & Conveyors * Manufacture of Overhead Bridge cranes and a Full line of conveyors (Power& Free, Chain, & Slat) * HSC was established in 1992 * Home office: Mabelvale, Arkansas * Manufacturing/Service Locations: Mabelvale, AR & Ft. Worth, TX * Service Locations: Troy, AL & Houston, TX * HSC Offers professional engineering services with communications and documentation * HSC uses 3D Autodesk Inventor software for intricate product design. * All Structural components are built to AWS D14.1 with and inhouse AWS inspector * Full time QUALITY Program * Member of CMAA & HMI HSC is a fast-growing company with immediate openings in the Dallas/Fort Worth for an experienced Overhead Hoist/Crane Technician with strong customer focus & the desire to go the extra mile. Field Service Technicians are primarily responsible for inspecting, troubleshooting & repairing overhead crane systems. Familiarity with gear drives, bearings, couplings, wire rope hoist, chain hoist, VFD controls, remote control systems as well as other crane & hoist components. * Candidates must pass drug/alcohol test and extensive background check prior to employment. Additional testing may be required as directed by customer. Key Responsibilities and Accountabilities: * Perform Scheduled preventive maintenance * Effectively interface with customer and HSC customer service to communicate maintenance, repairs and upgrades. * Inspect, Evaluate and make professional recommendations of repairs base on industry guidelines (OSHA, CMMA, NEC & ANCI) * Maintain professional rapport with customer by efferently responding to breakdowns, troubleshooting issues and completing job within acceptable timeframe. * Communicate with the customer on the repairs and any recommend preventive maintenance and/or inspection that may be required to monitor the crane system Required Skills and Knowledge: * Ability to work under pressure and with deadlines * Ability to work independently * Ability to fabricate and weld (certified) is a plus * Ability to perform inspection to OSHA/ANSI criteria * Ability to troubleshoot electrical circuits * Ability to disassemble and reassemble complex equipment * Ability to read drawings and electrical diagrams * Must be able to work at heights (20-100+ feet) * Must follow all safety guidelines * Maintain confidentiality * Quality & results driven * Good driving record Additional Requirements: * Must be willing & able to work off shifts and weekends as required by the customer * Must be able to work overtime as need by customer * Must be able to serve on call as part of the service office rotation * Must be able to travel out of town and overnight as needed * Must be able to frequently lift 25 lbs * Must be able to occasionally lift 50 lbs * Position requires frequent climbing, balancing, stooping/crouching & overhead reaching * Position requires occasional pushing, pulling, kneeling & crawling. * Position will frequently be exposed to heat, cold, noise and heights COMPETITIVE PAY FOR EXPERIENCED TECHS BENEFITS PACKAGE THAT INCLUDES: PROFIT SHARING AND 401k match Health, Dental and Vision Paid Holidays Paid PTO after completing 90 day probationary period Note-this is not a crane operator position-Service Technicians ONLY Must be able to pass a criminal background check and drug screening.

Job Description Texas AirSystems has been shaping the HVAC landscape in Texas for over four decades. With 500+ team members and seven offices statewide, we partner with over 60 leading manufacturers to deliver custom, high-performance solutions that stand the test of time. Here, your work matters. You'll be part of a team that values collaboration, rewards curiosity, and gives you the tools to keep growing. Whether you're just getting started or looking for your next big challenge, this is a place where you can thrive and make a real impact. SIGN ON BONUS Boiler Technicians will receive a $2,000 sign-on bonus, plus an additional $2,000 at their 90-day mark Boiler Service Technician – Commercial HVAC Reports to: Area Service Manager FLSA Status: Non-Exempt The Opportunity We are seeking an experienced Boiler Service Technician. This position will be responsible for performing boiler inspections and maintenance. An ideal candidate will be customer service oriented and work well with others. Position requires a high level of correspondence with Project Managers, Service Coordinators and customers. Responsibilities • Provide a variety of preventative maintenance, repairs, inspections, etc. on boilers and other HVAC equipment, • Performs electrical and mechanical inspection and maintenance on equipment to ensure peak performance, • Perform specific preventative maintenance including cleaning of equipment, • Uses experience and technical skills with preventive maintenance and system operations to determine service requirements, • Ability to interpret engineering drawings in reference to layout, location and operation of the system(s), • Represents the company in a positive manner to other trades, contractors and owners, • Advises owner/representative of preventive maintenance inspections performed and corrective actions to be taken, • Suggest additional services that are beneficial to customer, • Works in a team-based environment to share information and workload while ensuring customer satisfaction, • Submits required paperwork to Service Coordinator daily, • Must work in a safe manner on a daily basis and ensure that all safety measures are taken at all times, • Performs other duties as assigned, • High School Diploma or equivalent, • Must have valid driver's license with good driving record, • Must have current Boiler certification and OSHA 10 Training, plus 1-5 years' experience working as a Service Technician in a commercial environment, • Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad), • Electrical knowledge required and EPA Certification (i.e. HVAC Journeyman, Boiler Operator, Gas Installer, etc.), plus 2-3 years boiler maintenance and repair experience preferred, • Ability to work in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, risk of electrical shock (high voltage), climbing/working at elevated heights, etc., • Must be able to climb, crawl, stoop, kneel and must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks. Environmental Requirements Will be required to work in a field environment, multiple customer sites on a daily basis. Physical Demands While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship. Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.

Job Description The Compressor Rebuild Technician is responsible for performing maintenance and rebuilding tasks on a variety of industrial compressors. This role requires meticulous attention to detail and a solid understanding of mechanical systems to ensure all equipment operates efficiently and reliably. Duties/Responsibilities: • Perform maintenance and rebuild tasks on various industrial compressors, • Ensure all equipment operates efficiently and reliably, • Diagnose mechanical issues and implement effective solutions, • Maintain accurate records of maintenance and repair activities, • Adhere to safety protocols and guidelines, • Collaborate with other technicians and departments to optimize workflow, • Provide technical support and guidance to junior staff, • Other duties as assignedRequired Skills/Abilities:, • Extensive knowledge of compressor systems and their components, • Ability to diagnose and troubleshoot mechanical issues, • Proficiency in using hand and power tools, • Skilled in reading and interpreting technical manuals and schematics, • Strong attention to detail and commitment to quality, • Excellent problem-solving and analytical skills, • Strong communication and interpersonal abilities, • Ability to work independently and as part of a team, • Time management skills and ability to prioritize tasks effectively, • Knowledge of safety protocols and regulationsEducation/Experience:, • High school diploma or equivalent, • Formal training or certification in mechanical/automotive engineering or a related field, • Minimum of 3 years of experience in industrial equipment repair, • Hands-on experience in compressor rebuilds and maintenance, • Proficiency in reading and interpreting technical manuals and blueprints, • Strong mechanical aptitude and troubleshooting skills, • Familiarity with using precision measuring instruments and toolsTravel Requirements:, • Ability to travel occasionally to attend meetings, trainings, and events.Physical Requirements:, • Ability to use a computer, phone, printer, scanner, and other office equipment., • Ability to stand and walk for long periods of time, • Bend, kneel, and crouch for extended periods, • Ability to perform repetitive movements, • Ability to move in and around confined and cluttered places and uneven areas, • Ability to lift, carry, and move objects weighing up to and exceeding 50 pounds, • Adequate vision to perform all required tasks, • Work on ladders, scaffolding, and rooftops, • Comfortable with heights and able to climb and descend safely, • Strong sense of balance and spatial awareness, • Participate in respiratory fit testing and use as required About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job DescriptionDescription: Job description: Who we are: We are a dynamic engineering business working in the aerospace market specialising in maintenance tooling and ground support equipment. Our services include engineering, planned maintenance, repairs, upgrades, calibration, and testing. We operate workshop and field technicians supporting our customers at airlines, MROs, and engine/aircraft OEMs. Our global presence includes facilities across the United States, United Kingdom, Europe, and The Middle East. About the role: We are looking for a Maintenance Technician to join our engineering team based at our Dallas facility. The successful candidate will primarily work from our Dallas facility but will also support our engineering teams across other locations from time to time. A varied role, work will mainly be mechanical but there will be elements of hydraulic, pneumatics and electrical aspects to consider. Day to day tasks will consist of delivering planned maintenance and repairs to aircraft ground support equipment and tooling – with a mixture of onsite maintenance and workshop activities. Key Responsibilities (but not limited to): • Delivering planned maintenance tasks to various types of aircraft equipment and tooling – example: engine stands, engine tooling, ground support equipment, steps, platforms, trailers, trolleys, tow bars, jacks., • Carrying out repairs to equipment as may be required, including troubleshooting problems., • Working on several projects at one time., • Reading engineering drawings and manuals to support fault-finding and identifying spare parts., • Working as part of a wider engineering team., • Surveying equipment to identify faults and generating reports via our online system., • Supporting work activities at other locations across the network as required from time to time., • Trade school certification, bachelor’s degree from a related field is preferred., • Must have a minimum of 3 years of job training in a similar role and industry., • Ability to trouble shoot items such as manual and powered machinery, maintenance equipment and workshop/hanger tooling., • Candidates must successfully pass a welding test prior to hire., • Fluent in English (other languages are a plus). Ability to read and write English and follow verbal and written instructions in English. A clear understanding of simple math is essential., • The ideal candidate will demonstrate a proactive approach to the role and will be committed to delivering excellent customer service., • Clear technical competency and at least two years related experience, • Formal engineering or similar related qualification., • Excellent customer service skills., • Ability to work alone and as part of a team., • Excellent planning and organizational ability with an analytical approach to problem solving., • Experienced with IT, demonstrating ability in MS Office - including Email, Outlook, Word, and Excel, • Good at communicating with people at all levels., • Travel between sites may be a requirement as needed., • Full clean driving record, • Must have right to work in the United States. While performing the duties of this job, employees are regularly required to sit, walk and stand; talk or hear, both in person and by telephone; use hands repetitively to finger, handle, feel or operate standard office equipment; reach with hands and arms; and lift up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, and the ability to adjust focus. The work environment characteristics described here represent those employee encounters while performing this job's essential functions. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Employees work under typical office conditions, and the noise level is usually quiet to moderate. However, in certain assignments, an employee may work near moving equipment and be exposed to toxic or caustic chemicals, biological hazards, airborne fumes, outdoor weather conditions, and loud, prolonged noise. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Tuition reimbursement, • Preventive maintenance: 2 years (Required) Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insuranceRequirements:, • Welding skills required; candidates will be required to pass a welding test.

Job Description Quality Site Manager Location: Arlington, TX with Travel to US Employment Type: Full-Time Reports To: Assistant Operations Manager Overview Vayan Group is seeking a Quality Site Manager to oversee day-to-day quality operations, inspection coordination, and customer relations at key automotive and manufacturing locations across the U.S. This role combines hands-on technical expertise with leadership and project management, ensuring all inspection and containment activities meet customer and Vayan Group quality standards. The position involves frequent travel to customer sites to support product launches, conduct audits, and lead quality teams in fast-paced manufacturing environments. If you’re a driven leader who thrives on accountability, teamwork, and precision—this is your opportunity to join a rapidly growing, quality-driven organization. Key Responsibilities Leadership & Site Management • Lead all on-site operations, including inspection, containment, and quality support activities., • Supervise and mentor a team of inspectors and team leads across multiple shifts., • Coordinate staffing, scheduling, and daily priorities to meet customer and project needs., • Enforce Standardized Work Instructions (SWI), 5S, and safety practices across all operations., • Maintain compliance with ISO 9001 and customer-specific quality standards., • Perform and oversee dimensional inspections using precision tools such as calipers, pin gauges, micrometers, and height gages., • Review and approve AS9102 First Article Inspection (FAI) reports for machined parts and assemblies., • Interpret blueprints, technical drawings, and engineering specifications to ensure product conformity., • Conduct and document Layered Process Audits (LPAs), process validations, and corrective actions., • Oversee scrap containment, nonconforming material control, and rework processes in collaboration with production and logistics., • Act as the primary customer liaison for quality and inspection operations., • Collaborate with customer Quality, Engineering, and Materials teams to resolve issues quickly and effectively., • Coordinate with suppliers, OEMs, and internal stakeholders to support pre-series builds and launch readiness., • U.S. Citizenship required (for clearance eligibility)., • 5+ years of experience in a manufacturing or quality-focused environment., • Proven success leading teams of 6+ in multi-shift or multi-site operations., • Strong technical understanding of blueprints, tolerances, and inspection methods., • Hands-on experience with precision measurement tools (Calipers, Pin Gauges, Micrometers, Height Gages)., • Experience with AS9102, PPAP, FMEA, PSA, and SPC processes., • Excellent communication, leadership, and problem-solving skills., • Proficient in Microsoft Office (Excel, Word, Outlook, PowerPoint)., • Comfortable working in fast-paced, factory or warehouse environments with strict quality and safety standards., • Bachelor’s degree or coursework in Industrial Engineering, Manufacturing Technology, or a related field., • Certifications in QMS, ISO 9001, AS9102, or related quality systems., • Ability to stand for long periods, walk extensively, and lift up to 25 lbs., • Flexible schedule; may include occasional weekends and extended hours per customer demand., • Reliable transportation and excellent attendance required. At Vayan Group, we believe in Quality Without Compromise. You’ll join a team driven by integrity, precision, and accountability—backed by ISO 9001 certification and a commitment to continuous improvement. Be part of an organization where leadership, innovation, and excellence come together to move manufacturing forward. Together, We Go Vayan.

Description Have you ever wondered what it would be like to work with one of the BEST in government contracting? Ranked by Forbes as a Top government contractor and one of the World's Most Ethical Companies, Team Leidos is one you don't want to overlook. Everything we do is built on commitment to do the right thing for our customers, our employees and our community. We embrace and solve some of the world’s toughest challenges. We're focused on ensuring our customers have the right tools, technologies and tactics to keep pace with an ever-evolving world landscape. We know once you join Team Leidos, you are sure to go home at the end of each day knowing YOU MADE A DIFFERENCE, resulting in one of the most REWARDING careers you could have imagined. We Want You! The National Airspace Systems Integration Support (NISC) program at Leidos is seeking an Electrical Engineer to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in Des Plaines, IL. The National Airspace Systems Integration Support (NISC) program at Leidos is seeking an Electronics Engineer to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group located in Fort Worth, TX The ideal candidate will support the daily operations of the FAA’s Terminal Group. Duties include but are not limited to: • Plan and design electrical systems for a variety of FAA buildings and structures., • Perform on-site surveys to develop “to-scale” designs and detailed reports., • Test and analyze power systems and participate in construction inspections and final inspections inclusive of CAI and JAI., • Confer with engineering staff and other personnel to identify and resolve problems with the design or implementation., • Coordinate design components with a multi-disciplinary team and generate drawings, wiring diagrams, and wiring schematics as required for site-specific modifications and new construction., • Prepare construction drawings and prepare site-specific specifications and contract documents and independent cost estimates., • Perform project management related tasks and communication (including safety plans, sequence of work, cutover plans)., • Generate and coordinate the Integrated Risk Management Checklists (IRMC), communication plans, project risk register, to meet Operational Risk Management (ORM) requirements., • Coordinate and complete Work Permits required for potential impact to lead and asbestos that may be encountered during construction., • Participate in meetings inclusive of the pre-construction meeting and on-site construction meetings with stakeholders to coordinate electrical systems with other ongoing construction and projects., • Plan, schedule, and coordinate construction project activities to meet milestones and deadlines; working directly with stakeholders and contractors., • Manage and participate in on-site cutovers, testing and restoration of facilities., • Prepare, maintain, and provide periodic updates of project to team, management, and stakeholders., • Manage multiple projects towards successful on-time completion., • Review contractor design and construction submittals., • Perform internal design reviews of FAA designed power projects., • Effectively communicate in written and verbal form., • Accomplish clear and concise general and technical writing and tactfully coordinate with a variety of project stakeholders, peers and management levels. Basic Qualifications: • Must have a Bachelor’s Degree in Electrical Engineering or Power related degree from an accredited College/University and a minimum of 6 years of prior relevant experience or Masters with minimum of 5 years of relevant experience, • Exceptional written and verbal communication skills., • Proven ability to produce clear, concise general and technical documentation, and to collaborate effectively with diverse stakeholders, team members, and all levels of management., • Extensive experience in the design of 120/208V and 480V electrical systems, including additions, modifications, and new construction projects., • Extensive understanding and experience with the National Electric Code for modifications and new builds., • Knowledgeable of electrical trade installation methods, techniques, and hardware for use in designing construction drawings., • Experience designing electrical circuits and breakers for pumps, motors, air handlers, and other mechanical systems, • Experience designing and modifying electrical distribution for commercial, industrial and/or government facilities, including standby engine generator and un-interruptible power systems (UPS)., • Experience performing Load Calculations., • Must be proficient with Microsoft Office Suite and able to organize documentation and have an awareness of general documentation systems., • Strong experience with AUTOCAD., • Ability to obtain Public Trust Clearance., • Ability to travel up to 50% of the time. Desired Qualifications: • Experience supporting the Federal Aviation Administration, • Experience with power system analysis software such as EDSA Power Analytics and SKM Systems Analysis Power Tools. For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $87,100.00 - $157,450.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Financial Data AnalysisEmbedded FinanceInvestment Strategy & AdvisoryPredictive Analytics & VisualizationAbout micro1micro1 connects domain experts to the development of frontier AI models. Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform. AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments. Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality contributions at scale.Our goal is to enable 1 billion people to do meaningful work by applying their expertise to AI. We’ve raised $40M+ in funding, and our AI recruiter has powered over 1 million AI-led interviews as our global network of experts grows into the human intelligence layer for AI. Job Title: Financial Analyst Job Type: Full-time or Part-time, Contract Location: Remote Job Summary Are you a skilled Financial Analyst looking for your next opportunity? Join our dynamic talent pool and gain access to exciting roles with top-tier clients. Be the first to hear about new openings and work with innovative teams that value financial excellence in data-driven analysis. Key Responsibilities • Analyze complex financial data to identify key trends and provide actionable insights for strategic decision-making., • Lead the evaluation of embedded finance opportunities and contribute to advisory on investment strategies., • Develop predictive financial models and dynamic visualizations using up-to-date analytics platforms., • Conduct thorough market and industry research, synthesizing information from diverse sources to inform business recommendations., • Communicate findings and strategic recommendations clearly in both written reports and verbal presentations to stakeholders., • Stay ahead of the latest trends in the Asian economy, embedded finance, and digital financial solutions., • Collaborate with cross-functional teams to translate analytical results into business outcomes. Required Skills and Qualifications • Bachelor’s degree in Finance, Economics, or related field., • Professional certification (CFA, CIIA, CMA) or proven experience as a financial analyst in a leading finance institution., • Strong proficiency in financial data analysis, predictive analytics, and visualization tools (e.g., Power BI, Tableau, Python or R)., • Demonstrated experience in investment strategy and advisory, particularly within embedded finance contexts., • Exceptional written and verbal communication skills, with a keen eye for detail and clarity., • Advanced online research capabilities and ability to synthesize diverse financial information rapidly., • Experience working in or with Asia, with a solid understanding of regional financial markets and economic drivers. Preferred Qualifications • Previous experience at an MBB (McKinsey, BCG, Bain) firm or a major financial institution., • Familiarity with digital finance platforms and emerging fintech trends in the Asian market., • Based in Asia, or extensive prior exposure to the Asian economic landscape.

Summary Manufacturing Technicians perform a multitude of assembly types, to include mechanical, electrical, and electro-mechanical. The individual must we willing to travel to both CONUS and OCONUS site and also to areas of the world that are eligible for hazard pay. Must hold Printed Circuit Board (PCB) component level soldering skills. Essential Duties and Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position works under general-close supervision and typically in a team environment. • Performs a variety of non-routine and non-repetitive production assembly operations on electronic assemblies, mechanical assemblies and subassemblies; includes cable assemblies/wiring harnesses., • Working with/use of common hand and/or power tools, jigs, and saws., • Determine methods and sequences of assembly/integration operations where complete information may not be readily available., • Must be knowledgeable and experienced working with and from Engineering sketches/diagrams, schematics, and drawings., • Responsibilities include fabrication, assembly, modification, and/or rework of subassemblies and assemblies, and integration of system hardware., • May participate in device(s) teardown, removal, and/or a part of the site installation team, which would require travel to field installation sites, possibly overseas (passport required), for up to six (6)-eight (8) weeks or so at a time., • Possible shift work involved at various times; including swing, second and/or third shift., • Working overtime as required/as requested (and possibly on a regular basis for extended periods)., • Knowledgeable of, and experience with, Microsoft Office Word and Microsoft Office Excel., • Responsible for closing applicable Manufacturing Order (MO) routing steps, both on the hardcopy MO as well as in Deltek Costpoint®, and generating Nonconforming Material Reports (NMR's) as applicable, • May assist in collecting data for Engineering Change Requests (ECR's) on issues discovered during the assembly/build/integration process. Qualifications and Education Requirements • High school diploma at minimum, with applicable experience working with electrical/mechanical assemblies and subassemblies, or an equivalent combination of education and experience., • Printed Circuit Board (PCB) component level soldering skills., • Must be knowledgeable and experienced working with and from Engineering sketches/diagrams, schematics, and drawings., • Experienced with common hand and/or power tools, jigs, and saws., • Must exhibit a “team first/teamwork” attitude., • Current passport is desired at start and will be required for overseas travel (when scheduled to support)., • Must be able to work for long periods of time standing, stooping and bending, and also lifting up to forty (40) to fifty (50) pounds, with no limitations/restrictions., • Must either have a current Department of Defense (DoD) Secret security clearance, or higher level, or being within the 24-month (two-year) window since last accessing it. If a clearance is not currently held, the process will be start Schedule: Full-time (but also may be part-time depending on workload an can include overtime as needed and on an extended period at times), • Shift: Day - 1st (although swing/2nd shift work may be required on an as needed basis), • Travel: Likely, could be up to 75-80% of the time, • Due to U.S. Government contract requirements, only U.S. citizens are eligible for this role. Security Responsibilities Must comply with all company security and data protection / usage policies and procedures. Personally responsible for proper marking and handling of all information and materials, in any form. Shall not divulge any information, or afford access, to other employees not having a need-to-know. Shall not divulge information outside company without management approval. All government and proprietary information will be accessed and stored electronically on company provided resources. • Incumbent must hold active DoD Personal Security Clearance. Due to U.S. Government contract requirements, only U.S. citizens are eligible for this role. Work Environment Work is performed in a subassembly shop, final assembly labs and customer sites. All areas are climate controlled however there are times when individuals will need to work outside in the elements. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to work for long periods of time standing, stooping and bending, and also lifting up to forty (40) to fifty (50) pounds, with no limitations/restrictions., • Must be able to climb and work from ladders., • Must be able to work overtime as needed Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for their job. Duties, responsibilities, and activities may change at any time with or without notice. Job Description Who We Are: • CAE Vision: Our vision is to be the worldwide partner of choice in defense and security, and civil aviation by revolutionizing our customers’ training and critical operations with digitally immersive solutions to elevate safety, efficiency and readiness., • CAE Defense & Security Mission: CAE's Defense and Security business unit focuses on helping prepare military customers to develop and maintain the highest levels of mission readiness., • CAE Values: Empowerment, Innovation, Excellence, Integrity and OneCAE make us who we are and we strive to make a difference in the world while helping each other succeed. What We Have to Offer: • Comprehensive and competitive benefits package and flexibility that promotes work-life balance, • A work environment where all employees are valued, respected and safe, • Freedom to succeed by enabling team members to deliver, take initiatives and make decisions, • Recognition, professional development, advancement and having fun! CAE USA Inc. is an equal opportunity employer, and all qualified applicants will be considered for employment without regard to any protected characteristic, including disability and protected veteran status, as defined under federal, state, or local laws. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at

Job DescriptionDescription: Design meets cleanliness. At Kozy Hotel, we believe a well-kept room is the foundation of a memorable stay. We’re looking for a detail-oriented Housekeeping Room Attendant who takes pride in creating spotless, welcoming spaces for every guest. What You’ll Do As a Room Attendant, you’ll be responsible for maintaining the cleanliness and comfort of guest rooms and public areas. Your responsibilities will include: • Cleaning guest rooms to brand standards, including making beds, dusting, vacuuming, and sanitizing bathrooms, • Replenishing amenities, towels, and linens with care and consistency, • Reporting maintenance issues or room damage promptly to engineering or management, • Ensuring carts, closets, and storage areas are clean, stocked, and organized, • Following safety and sanitation protocols, including handling chemicals and linens properly, • Assisting with deep cleaning projects and room turns as needed, • Previous housekeeping experience preferred (hotel or healthcare setting ideal), • Strong attention to detail and time management skills, • Ability to work independently and as part of a team, • Physical ability to lift, bend, push carts, and stand for extended periods, • Flexibility to work weekends, holidays, and varied shifts, • A positive attitude and pride in your work What We Offer • Competitive hourly pay, • Paid time off and holiday pay · Health benefits including fulling company paid medical, dental and vision • Employee discounts on hotel stays and amenities, • Uniforms and supplies provided, • A supportive, design-forward work environment where your effort is recognized Help us deliver the comfort guests remember. Join Kozy Hotel and be part of a team that values cleanliness, care, and hospitality.

Job Description Autonomous Vehicle Safety Driver Irving, TX | Full-Time | $25/hr | 1-Year Contract Turn Your Rideshare Driving Experience Into the Future of Transportation If you’ve spent time behind the wheel driving for Uber or Lyft, you already understand what it takes to stay alert, navigate busy roads, and safely transport passengers. Now imagine using those same skills to help test and improve self-driving technology that could transform the way people move through cities. We’re partnering with a leading autonomous vehicle company that is looking for experienced, safety-minded drivers to join their team as Autonomous Vehicle Safety Drivers in Dallas. Instead of picking up passengers, you’ll help monitor and support next-generation self-driving vehicles while they operate on real roads. If you’re a professional driver who takes pride in safety, awareness, and great driving habits, this is a unique opportunity to turn your experience into a role at the forefront of transportation innovation. What You’ll Be Doing As an Autonomous Vehicle Safety Driver, you’ll play a critical role in ensuring the safe and successful testing of self-driving vehicles while helping engineers improve the technology that will shape the future of mobility. Your day-to-day responsibilities will include: • Safely operating autonomous vehicles on public roads while monitoring system performance, • Remaining alert and ready to take control if needed to ensure safe driving conditions, • Observing vehicle behavior and collecting real-world data to support engineering improvements, • Conducting daily pre-drive safety checks and preparing vehicles for testing, • Communicating professionally with riders, engineers, and operations teams, • Documenting driving sessions and submitting detailed reports on vehicle performance Choose the schedule that fits you best: Shift Options • AM: 6:00 AM – 4:30 PM, • Thursday – Sunday, • Friday - Monday, • Pay: $25 per hour, • Schedule: Full-time (30+ hours per week), • Assignment Length: 1-Year Contract, • Projected End Date: February 23, 2026, • Strong, safe driving record and excellent driving instincts, • Highly attentive with the ability to stay focused for extended periods, • Calm and decisive in unpredictable traffic situations, • Strong communication and observation skills This isn’t just another driving job. You’ll be contributing to the development of autonomous technology that could transform transportation worldwide. Every mile you drive helps engineers improve systems that will one day power safer, smarter cities. If you're excited about technology, enjoy driving, and want to be part of the future of mobility — we’d love to hear from you! Company DescriptionAscent Placement Partners is a leadership focused staffing firm dedicated to helping organizations reach the peak of excellence by identifying the leaders who make the difference. We believe that every successful organization has a defining leader, the one who completes the climb, elevates performance, and unlocks the next level of growth. Our approach goes beyond filling roles. We take the time to understand each company’s vision, culture, and challenges to identify leaders who align strategically and inspire meaningful impact. By combining deep market insight with a consultative, relationship driven process, we connect organizations with proven talent capable of driving sustainable success.Ascent Placement Partners is a leadership focused staffing firm dedicated to helping organizations reach the peak of excellence by identifying the leaders who make the difference. We believe that every successful organization has a defining leader, the one who completes the climb, elevates performance, and unlocks the next level of growth. \r\nOur approach goes beyond filling roles. We take the time to understand each company’s vision, culture, and challenges to identify leaders who align strategically and inspire meaningful impact. By combining deep market insight with a consultative, relationship driven process, we connect organizations with proven talent capable of driving sustainable success.

Job Role: • Provide program management support onsite with a customer located in Mansfield, TX, including project creation, customer communication, and document creation and editing, as needed., • write and substantiate repair procedures, • Coordinate with ACD Consulting Engineers supporting this customer, as assigned., • Review any customer issues and provide timely solutions., • Track ACD Consulting performance with the customer and record metrics., • Duties may include FUSION, AUTOCAD, and/or SOLIDWORKS drafting and design., • Bachelor’s Degree, in engineering preferred but not necessary. Relevant work experience., • 3+ years work experience in an aviation related technical role, directly supporting Part 121 Airlines and/or Part 145 Repair Station, preferred., • Familiarity with reading/researching aircraft AMM/IPC/SRM/CMM data required., • Ability to travel/drive locally to customers, as needed., • Professional business-like manner and appearance representing ACD Consulting, for customer and coworker communications., • Excellent written and verbal skills., • Ability to be resourceful and proactive to address work related concerns., • Excellent organizational skills., • Multitasking and time-management skills, with the ability to prioritize tasks., • Must maintain a high level of accuracy and attention to detail.

Entry-Level Electrical Engineer 📍 DFW Metroplex - Hurst, TX 🏢 Full-Time | In-Office Build Your Engineering Career We are seeking a motivated Entry-Level Electrical Engineer to support commercial and industrial electrical construction projects throughout the DFW Metroplex. This role offers hands-on experience in electrical design, project coordination, and construction operations while working alongside experienced engineers and project managers. This is an excellent opportunity for a recent graduate or early-career professional looking to build a long-term career in electrical construction and project engineering. Recent graduates encouraged to apply! Responsibilities • Assist with low- and medium-voltage electrical system design and construction coordination, • Prepare and update electrical drawings, schematics, and construction documents, • Support project managers with submittals, RFIs, project reporting, and scheduling, • Coordinate with subcontractors, architects, engineers, vendors, and field teams, • Help ensure projects remain on schedule and within budget, • Participate in project meetings and jobsite visits as needed, • Utilize AutoCAD, Revit, Bluebeam, and related software to support engineering and project documentation, • Ensure work aligns with National Electrical Code (NEC) standards, • Gain exposure to estimating, project management, and construction operations Education • Bachelor’s Degree in Electrical Engineering or related engineering field preferred, • Candidates with strong relevant construction or electrical industry experience may also be considered, • FE/EIT certification or pursuit of licensure is a plus, but not required Skills & Experience • Basic understanding of electrical systems, • Familiarity with the National Electrical Code (NEC), • Experience with AutoCAD or similar design software is preferred., • Strong communication and organizational skills., • Ability to work collaboratively in a team environment., • Willingness to learn project management and construction coordination processes., • Construction industry experience is beneficial but not required. What We Offer • Competitive Compensation, • Health, Dental, Vision & Life Insurance, • 401(k) with Company Match, • Paid Time Off & Paid National Holidays, • Mileage Reimbursement, • Training & Continuing Education Support - EIT/FE/PE employer-sponsored training, • Career Growth Opportunities, • Collaborative Team Environment

Position: Product Designer Location: Fort Worth, Texas Duration: Contract Job ID: 175981 Job Overview: We are seeking a Product Designer to join a high-impact Digital Customer Experience team in Fort Worth, Texas. This role is ideal for a designer who thrives in customer-facing, product-driven environments and wants to shape experiences used at scale. You’ll partner closely with Product, Engineering, and stakeholders to influence product direction, elevate design quality, and deliver intuitive, end-to-end user experiences—from concept through execution. • This is a hybrid role (onsite Tuesday–Thursday, remote Monday/Friday)., • Interviews include two rounds (virtual + onsite)., • Not open to H1B candidates. Responsibilities: • Drive product and design decisions through UX best practices, research insights, and agile methodologies, • Collaborate closely with Engineering to deliver thoughtful, scalable solutions, • Gather, synthesize, and act on user and stakeholder feedback throughout the design process, • Present work with clarity and confidence, using strong storytelling and visual communication, • Provide regular updates using tools such as Jira, Rally, and Aha!, • Design intuitive, user-centered interfaces aligned with established design systems and patterns, • Create wireframes, flows, prototypes, and high-fidelity designs with strong systems thinking, • Plan and execute research (usability testing, interviews, heuristic evaluations) to validate design decisions, • Lead end-to-end design efforts from ideation through delivery, • Mentor other designers and contribute to a collaborative, high-performing team environment, • Ensure responsive, accessible designs across web and mobile platforms Qualifications: • Bachelor’s degree in HCI, Human Factors, Computer Science, Visual Design, or related field (or equivalent experience), • 3+ years of UX/Product Design experience in a collaborative, agile environment, • Proven ability to partner with Engineering from concept through implementation, • Strong proficiency in Figma and modern prototyping tools, • Experience designing for complex, customer-facing digital products across web and mobile (iOS/Android), • Familiarity with research methods including usability testing and user interviews, • Strong problem-solving and systems thinking skills, • Ability to organize and simplify complex workflows and information architecture, • Working knowledge of HTML, CSS, and frontend concepts, • Understanding of accessibility standards (WCAG 2.0+), inclusive design, and localization, • Experience with tools like Jira, Rally, and Aha!, • Excellent storytelling and presentation skills About PTR Global: PTR Global is a leading provider of information technology and workforce solutions. PTR Global has become one of the largest providers in its industry, with over 5000 professionals providing services across the U.S. and Canada. For more information visit . At PTR Global, we understand the importance of your privacy and security. We NEVER ASK job applicants to: • Pay any fee to be considered for, submitted to, or selected for any opportunity., • Purchase any product, service, or gift cards from us or for us as part of an application, interview, or selection process., • Provide sensitive financial information such as credit card numbers or banking information. Successfully placed or hired candidates would only be asked for banking details after accepting an offer from us during our official onboarding processes as part of payroll setup. Pay Range: $60-70 per hour The specific compensation for this position will be determined by several factors, including the scope, complexity, and location of the role, as well as the cost of labor in the market; the skills, education, training, credentials, and experience of the candidate; and other conditions of employment. Our full-time consultants have access to benefits, including medical, dental, vision, and 401K contributions, as well as PTO, sick leave, and other benefits mandated by applicable state or localities where you reside or work. If you receive a suspicious message, email, or phone call claiming to be from PTR Global do not respond or click on any links. Instead, contact us directly at +1 214-740-2424. To report any concerns, please email us at

$6 - $6/hourpayIMUAttention to DetailVideo CaptureAbout micro1micro1 connects domain experts to the development of frontier AI models. Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform. AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments. Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality contributions at scale.Our goal is to enable 1 billion people to do meaningful work by applying their expertise to AI. We’ve raised $40M+ in funding, and our AI recruiter has powered over 1 million AI-led interviews as our global network of experts grows into the human intelligence layer for AI. Job Title: Data-Video Generalist Job Type: Contractor Location: Remote - experts based in Latin America and the Caribbean. Selected countries include: Mexico, Costa Rica, Panama, Dominican Republic, Brazil, Argentina, Colombia, Chile, Uruguay, Jamaica, Bahamas, and Barbados. Timeline: Applications close on May 8th at 5 pm PST. Job Summary: Join our customer's team as a Data-Video Generalist and make a direct impact on the future of activity recognition and robotics. In this expert-level, remote role, you will contribute vital synchronized motion and video data, helping to advance cutting-edge machine learning models for next-generation technologies. Key Responsibilities: • Capture precise motion data using your smartphone’s IMU sensors during specified physical activities., • Record synchronized video footage to ensure data accuracy and enhance the integrity of all collected motion data., • Follow detailed technical protocols to consistently meet strict quality, labeling, and determinism standards., • Deliver a minimum of 10 hours of high-quality, approved video data each week throughout the project’s duration., • Communicate clearly and proactively with the team to clarify requirements and share insights on data collection practices., • Maintain timely and reliable delivery of your outputs, aligned with project milestones and expectations., • Participate in device compatibility checks and an innovative, AI-enabled interview process as part of onboarding. Required Skills and Qualifications: • Access to a head strap to be able to record both hands within 48 hours of the start date., • Supported devices include the iPhone 11 and later, Google Pixel 6 and later, and Samsung Galaxy S21 and later., • Meticulous attention to detail and a proven record of following standardized protocols., • Demonstrated ability to consistently manage output and meet deadlines in a dynamic, data-driven environment., • Exceptional written and verbal communication skills essential for documentation and remote collaboration., • Advanced tech-savviness and experience with mobile devices for sensor and video data capture., • Physical ability to engage in repetitive movement tasks safely and effectively., • Access to a compatible smartphone capable of high-fidelity data collection. Preferred Qualifications: • Familiarity with structuring large-scale datasets for AI and robotics applications. Compensation is output-based; experts are paid per minute of submitted video that meets the project specifications. The time required to complete work may vary depending on the expert’s experience and workflow. Minimum submission requirements apply. Videos must be at least 2 minutes in length. Experts must submit a minimum of 10 hours of video per week. Hands-Free Capturing: This project uses a smartphone head strap for video. It’s a nice-to-have if you already own one. If you don't own one, once selected, we will offer you a sign-up bonus to cover the cost of this equipment to secure your readiness to work. We Move Fast: We typically fill roles within 48 hours, so we’re looking for teammates who are ready to jump in. If selected, we’d love for you to start your first task as soon as you move forward with your application.

Project Engineer Opening with Established CT Contractor | Growth Opportunities! This Jobot Job is hosted by: Christina Chariott Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $70,000 - $75,000 per year A bit about us: Our client is a well-established contractor with decades of experience delivering high-quality framing, drywall, ceiling systems, and general trades work across the Connecticut and Western Massachusetts. Known for their reliability, innovation, and strong partnerships, they take pride in completing projects on time and on budget while fostering a collaborative team environment. Apply now to learn more! Why join us? • Competitive compensation + bonus structure, • Full benefits offered: medical, dental, vision, life insurance, 401k, • Be part of a company with over 65 years of industry leadership in construction, • Benefit from a stable, growth-oriented environment with long-standing client relationships Job Details Key Responsibilities Prepare, process, and track submittals. Issue and track RFIs with project managers; distribute to field personnel and subcontractors. Generate and update material procurement logs. Prepare jobsite scope binders, plans, and construction documents for field use. Assist project managers with print markups (e.g., Bluebeam). Update project schedules with team support. Utilize project management/accounting software (e.g., Sage 300/Timberline) accurately. Maintain professional communication with subcontractors and the construction team. Consistent follow-up and follow-through with internal and external parties. Qualifications Bachelor’s degree in Civil Engineering, Construction Management, or related field preferred. Proven experience in construction management or project engineering. Proficiency in Microsoft Office (Outlook, Excel, Word), Bluebeam, ProCore, etc. Ability to read blueprints, schematics, and technical drawings. Excellent time management and task prioritization skills. Positive attitude and adaptability in a fast-paced environment. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionDescription: Position Summary: The Spares Operation Planner is responsible for coordinating and scheduling the spare part, spare assembly and mod kit on time delivery to all RECARO customers by releasing both spares assembly orders and mod kit orders in SAP and ensuring all components needed are on time in order to meet scheduled delivery dates for spare parts, spare assemblies and mod kits. Essential Duties and Responsibilities include the following, other duties may be assigned: • Enter, review and release both spares assembly orders and mod kit orders in SAP., • Determine lead times for both assemblies and mod kits (based on the longest lead time items in the BOM), • Coordinate with other departments (e.g. Purchasing, MRP, Logistics, Quality, etc.) to ensure all components needed are on time in order to meet scheduled delivery dates, • Monitor all released spare parts orders with Logistics to ensure proper picking and issuing of parts., • Part number set up in SAP for all parts applicable (both E and F parts)., • Make any changes (e.g. lead times, buyer, indexes, requirements, etc.) necessary in the material master, • Check and create routings for all assemblies and mod kits, • Investigate and resolve any problems that arise pertaining spare parts, spare assemblies and mod kits., • Organize, prepare and run daily Spares Shop Floor Meeting in coordination with Spares Coordinators, • Run shortage report on a regular basis and initiate appropriate actions, • Understand Engineering Bill-of-Material (BOM)., • Read and interpret assembly and mod kit drawings., • Interact with customers and suppliers as required., • Participate in special projects as required., • Working closely with service coordinators to ensure customer needs are met. Requirements: Education/Experience: Education: • 3 years of production planning experience preferably with commercial airline seats, • Previous customer service experience, • Familiarity of Lean Manufacturing a plus

Job DescriptionJob Summary: We are seeking a highly skilled and detail-oriented CMM Programmer with expertise in Zeiss Calypso software to join our team. The ideal candidate will focus on developing and optimizing CMM programs to support precision manufacturing and quality assurance processes. This role requires advanced knowledge of Geometric Dimensioning and Tolerancing (GD&T), experience with Catia and 3DX, and proficiency in Microsoft Office Suite. The programmer will collaborate with engineering and manufacturing teams to ensure dimensional accuracy and compliance with design specifications, while effectively communicating results to stakeholders. Key Responsibilities: • Develop, write, and optimize CMM programs using Zeiss Calypso software to support manufacturing and quality assurance processes., • Interpret and apply GD&T requirements to create accurate and efficient CMM programs for complex rotorcraft components and assemblies., • Collaborate with design and engineering teams to review technical drawings and 3D models, ensuring proper programming for dimensional validation., • Utilize Catia and 3DX to interpret 3D models and integrate design data into CMM programming., • Maintain and update CMM programs to reflect design changes, process improvements, and evolving quality standards., • Provide technical support and troubleshooting for CMM programming and operation., • Prepare and deliver documentation, reports, and presentations using Microsoft Office Suite (PowerPoint, Access, Word, and Excel)., • Communicate programming results and recommendations to executive management, customers, and cross-functional teams. Qualifications: Education: • Completed Bachelor’s Degree Required Skills and Experience: • Advanced proficiency in Zeiss Calypso software for CMM programming., • Strong knowledge of GD&T principles and their application in programming and manufacturing processes., • 3-5 yrs of experience in developing and validating CMM programs for complex components and assemblies., • Proficiency in Microsoft Office Suite (PowerPoint, Access, Word, and Excel)., • Effective communication and interpersonal skills to interface with executive management, customers, and cross-functional teams. Preferred Skills and Experience: • Experience with Catia and 3DX for reviewing and interpreting 3D models and technical drawings., • Familiarity with aerospace or rotorcraft manufacturing processes and quality standards. Key Competencies: • Strong analytical and problem-solving skills., • Attention to detail and commitment to quality., • Ability to work independently and as part of a team., • Effective time management and organizational skills.

Job Overview: Earn While You Learn. Build a Six‑Figure Sales Career. Guaranteed Training Pay: $2,000 Biweekly for Your First 8 Weeks Are you a confident, people‑first sales professional who thrives on meaningful conversations and real results? Do you enjoy helping homeowners transform their spaces—and seeing the impact of your work every day? At Infinity Replacement, we bring the legacy of Marvin directly to homeowners through a premium, consultative, in‑home experience. Our direct‑to‑consumer model allows you to focus on what you do best: building trust, solving problems, and delivering exceptional results. The Opportunity As an In‑Home Design Consultant, you’ll meet with pre‑qualified homeowners who are actively looking to replace windows or doors. You’ll guide them through product selection, design options, and the decision‑making process—helping them invest confidently in their home. If you’re motivated by strong earning potential, autonomy, and purpose‑driven work, this role offers a clear path to long‑term success. Highlights of your role: • Represent Infinity Replacement by Marvin with professionalism and integrity, • Attend scheduled, pre‑qualified in‑home appointments, • Lead homeowners through our consultative sales process, • Create customized proposals and complete contracts, • Build lasting relationships that drive referrals and repeat business Compensation & Perks • $100K+ earning potential; top consultants average $200K+, • Commission credited at time of order (no waiting for installation), • Guaranteed training pay: $2,000 biweekly for your first 8 weeks, • Monthly car allowance (average $550), • Mileage reimbursement, • Company‑provided phone, laptop, or iPad, • Monthly and annual bonus opportunities We Invest in You From day one, you’ll receive comprehensive paid training in: • Product knowledge, • Consultative selling, • In‑home design solutions, • Tools and systems for long‑term success You’re a good fit if you have (or if you can):, • Enjoy helping people and solving real problems, • Are motivated by performance‑based earnings, • Build rapport easily and communicate with confidence, • Want a career—not just a job, • Outside sales experience is a plus—but not required, • CRM or digital pricing experience helpful, not required We also want to make sure you have:, • Valid driver’s license with an acceptable accident and moving violation motor vehicle record., • Flexibility for appointments with our customers, • Strong written and verbal communication skills For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities #infinity Compensation: Potential Earnings of up to $250,000+

Job Overview: Earn While You Learn. Build a Six‑Figure Sales Career. Guaranteed Training Pay: $2,000 Biweekly for Your First 8 Weeks Are you a confident, people‑first sales professional who thrives on meaningful conversations and real results? Do you enjoy helping homeowners transform their spaces—and seeing the impact of your work every day? At Infinity Replacement, we bring the legacy of Marvin directly to homeowners through a premium, consultative, in‑home experience. Our direct‑to‑consumer model allows you to focus on what you do best: building trust, solving problems, and delivering exceptional results. The Opportunity As an In‑Home Design Consultant, you’ll meet with pre‑qualified homeowners who are actively looking to replace windows or doors. You’ll guide them through product selection, design options, and the decision‑making process—helping them invest confidently in their home. If you’re motivated by strong earning potential, autonomy, and purpose‑driven work, this role offers a clear path to long‑term success. Highlights of your role: • Represent Infinity Replacement by Marvin with professionalism and integrity, • Attend scheduled, pre‑qualified in‑home appointments, • Lead homeowners through our consultative sales process, • Create customized proposals and complete contracts, • Build lasting relationships that drive referrals and repeat business Compensation & Perks • $100K+ earning potential; top consultants average $200K+, • Commission credited at time of order (no waiting for installation), • Guaranteed training pay: $2,000 biweekly for your first 8 weeks, • Monthly car allowance (average $550), • Mileage reimbursement, • Company‑provided phone, laptop, or iPad, • Monthly and annual bonus opportunities We Invest in You From day one, you’ll receive comprehensive paid training in: • Product knowledge, • Consultative selling, • In‑home design solutions, • Tools and systems for long‑term success You’re a good fit if you have (or if you can):, • Enjoy helping people and solving real problems, • Are motivated by performance‑based earnings, • Build rapport easily and communicate with confidence, • Want a career—not just a job, • Outside sales experience is a plus—but not required, • CRM or digital pricing experience helpful, not required We also want to make sure you have:, • Valid driver’s license with an acceptable accident and moving violation motor vehicle record., • Flexibility for appointments with our customers, • Strong written and verbal communication skills For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities #infinity Compensation: Potential Earnings of up to $250,000+

ID 2026-9639 Department Marketing Position Type Regular Location US-TX-Fort Worth Location Arlington, TX, TX, US Location Duncanville, TX, US Location Weatherford, TX, US Location Mansfield, TX, US Infinity Replacement is Marvin's direct-to-consumer solution for homeowners who want premium windows and doors without the hassle. We bring Marvin's 100+ year legacy of craftsmanship straight to customers through high-quality products, professional installation, and personalized inhome consultations. We're looking for Brand Ambassadors who enjoy engaging with people face to face and have a natural ability to spark interest through conversation. This role is focused on starting conversations and scheduling inhome consultations-not closing sales. Is This You? You're approachable, confident, and comfortable talking with new people in person. You know how to make a strong first impression, ask good questions, and represent a premium brand professionally. You're goaloriented, dependable, and motivated by results-but you don't need to be pushy or salesy to succeed. Whether you come from retail, hospitality, customer service, events, or are exploring a career path in sales and marketing, this role offers flexibility, strong earning potential, and room to grow. Engage in person with homeowners at retail locations, events, and community venues • Introduce customers to Infinity Replacement by Marvin in a friendly, professional way, • Identify interest and generate qualified leads by scheduling inhome consultations, • Accurately record customer information and appointment details, • Set up, maintain, and manage branded displays What's In It for You • Strong Pay with Real Earning Power, • Guaranteed $20/hour, • Weekly bonuses for every qualified appointment generated - no cap, • Top performers regularly earn $25-$35+ per hour, • Many earn $1,000+ per week, even working part time, • Flexible Schedule, • Choose shifts that fit your life, including weekdays, evenings, and weekends, • Minimum commitment of 15 hours per week, • Training, Support, and Growth, • Paid training and ongoing coaching, • Clear expectations and messaging, • Opportunities to advance into sales, leadership, or remain in a highearning flexible role, • Toll reimbursement and the pride of representing a premium, trusted brand, • Are 18 years of age or older, • Reliable transportation (travel to retail locations and events required), • A smartphone, • Comfort standing and moving throughout your shift, • Ability to lift up to 40 lbs (display setup), • Confidence handling rejection-you understand every "no" gets you closer to a "yes" From people to products, Marvin is committed to creating better ways of living. When you join this family-owned and -led window and door company, you belong to a community full of opportunities. For more than a century, we've been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin's quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. Marvin is committed to creating an inclusive environment for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable laws. Applicants requiring reasonable accommodation for any part of the application and hiring process may contact us at . #infinity Earn $25 - $35+/hr - guaranteed hourly pay of $20/hr plus weekly bonuses for every qualified lead

Location US-TX-Fort Worth ID 2026-2129 Category Site Development & Planning Position Type Full-Time Remote No Parkhill is seeking a professional civil engineer with a specialization in site development to be part of our team in Fort Worth, Texas. This position is an opportunity to enhance one's design skills while working on Parkhill's diverse range of site development related work. This is a full-time, exempt position paid on a salary basis. Life at Parkhill At Parkhill, Building Community is the reason we exist. We invest in extraordinary people who love investing in their communities. We are more than planners, architects, and engineers - we are neighbors who choose to live and work in the communities we serve. Increase your impact with our team of passionate collaborators. Whether you are a recent graduate with untapped potential or a professional with proven experience, we invite you to discover a career path designed for you. Parkhill is one of the largest architectural and engineering firms in the Southwest with14offices located throughout Texas, New Mexico, and Oklahoma. Leadership and management of engineers and technicians. • Technical supervision and design capabilities in the areas of pavement, utilities, grading, site elements, and drainage., • Client development and management, including successful relationships, financial accounting, and responsiveness., • Familiarity with local zoning ordinances, subdivision regulations, and other design criteria., • Manage demands of in-house and external surveying support., • Community involvement including active participation and seeking leadership roles in civic, technical, and professional organizations., • Develops proposals, scopes, fees, and tracking performance., • Development and maintenance of relationships with City departments., • Presentations at hearings, Commissions, and Council meetings., • Project types to include:, • Site Design for Office, Retail, Industrial, and Institutional Buildings, • Residential Subdivisions from Land Acquisition to Finished Lots, • Municipal Roadway, Drainage, and Planning projects, • Bachelor's degree in engineering required., • Professional engineer registration in Texas., • Minimum 6 years of experience in the types of responsibilities listed above., • Additional desirable experience would include:, • Experience including plans production and management of the following tasks:, • Experience with entitlements such as Platting, Zoning, and Municipal Permitting, • Experience with Site Planning and Development Master Planning, • Grading and Drainage Design, • Street and Alley Design, • Site Design, • Water and Wastewater Design, • Hydrology and Hydraulics Analysis and Design, • General Civil Design, • Construction Management, • Software including AutoCAD Civil 3D and ArcGIS., • SWP3s, • Excellent written and oral communication skills to interact effectively with clients, staff, municipal authorities, vendors, and contractors., • Must be able to attend City Council/client meetings as needed. Benefits and Perks We offer a comprehensive benefits program that supports the whole person. Our benefits include: * Life Balance: hybrid/flexible work schedules, flexible work environment, generous PTO, paid holidays. * Investing in Your Future Growth: specialized training, continuing education, professional licensing, intern development programs, University of Parkhill. * Competitive Benefits: Multiple health plan options, FSA for dependent care, HSA contributions, employer 401k contribution, employer-paid basic life, short/long term disability coverage, performance bonuses. * Well-Being: mental health care, culture committees, wellness program, charitable giving match.

Yellowstone Local is proud to represent Lone Star Fire Sprinkler, Inc., an industry leader in fire sprinkler and low-voltage life safety systems. If you can both design and estimate complex systems while turning plans into profitable wins, this is where your skill set stands out and pays off. * Competitive base salary, depending on experience * Commission of 1.5% on contract sales, paid quarterly after 90 days * Additional Christmas bonus * Typical schedule of 7 AM to 4 PM with flexibility * Overtime opportunities paid at 1.5x rate * Opportunity to work on large-scale commercial projects valued at $2M to $5M * Clear path to grow into a Sales Estimator role * Consistent, full-time workload with high-impact commercial projects * Health, dental, and vision insurance * 401(k) with company match * Paid time off and holidays * Exposure to advanced estimating tools and technologies, including AutoCAD and Spincad * Work alongside experienced professionals in fire alarm, life safety, and low-voltage systems * Be part of a company that values precision, performance, and accountability * Strong collaboration between estimating, engineering, and operations teams * Your input directly impacts project success and company growth * Opportunity to expand into client-facing roles and sales functions * Prepare detailed and competitive cost estimates for commercial fire alarm and low-voltage systems in Richland Hills, Texas * Review blueprints, specifications, and bid documents for accuracy and completeness * Perform material, labor, and equipment takeoffs using AutoCAD and or Spincad * Design fire alarm and low-voltage systems when needed to support estimating efforts * Collaborate with sales, engineering, and operations teams to align project strategy * Identify risks, cost-saving opportunities, and value engineering solutions * Support proposal development and assist with client presentations when needed * Build and maintain strong relationships with vendors and subcontractors * Contribute to successful bidding strategies on large-scale commercial construction projects Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. Lone Star Fire Sprinkler, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. * 5 or more years of estimating experience in fire sprinkler, life safety, or low-voltage systems * Design experience in fire sprinkler or low-voltage systems strongly preferred * The ability to both design and estimate projects is highly valued * Strong knowledge of commercial construction and large-scale project workflows * Proven ability to estimate projects valued at $2M or more * Proficiency in AutoCAD and or Spincad for system layout and takeoffs * Strong analytical, organizational, and communication skills * Ability to interpret technical drawings and specifications accurately * NICET Level II or higher certification preferred * Background as a fire alarm designer or systems engineer is a plus Lone Star Fire Sprinkler, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #yellow

Job Description AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today's five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. What You'll Do: Machine Operation & Setup • Operate 5-axis CNC machines to manufacture complex aerospace components with tight tolerances, • Perform complete machine setups, including tooling, fixtures, offsets, and workholding, • Load, verify, and adjust CNC programs to ensure accuracy and efficiency, • Interpret engineering drawings, GD&T requirements, and work instructions, • Perform first article, in-process, and final inspections using precision measuring tools (calipers, micrometers, gauges), • Ensure all components meet aerospace tolerances and quality standards, • Diagnose and resolve machining issues such as tool wear, chatter, and offset discrepancies, • Optimize feeds, speeds, and tool paths to improve efficiency and part quality, • Conduct routine preventative maintenance (coolant checks, lubrication, cleaning), • Maintain a clean, organized, and safe work environment, • Partner with engineering, quality, and production teams to resolve technical issues, • Accurately complete job travelers, ERP entries, and production documentation, • High school diploma or GED (technical certification preferred), • 2–5+ years of experience operating 5-axis CNC machines in a manufacturing environment, • Strong ability to read and interpret engineering drawings and GD&T, • Proficiency with precision measuring instruments (calipers, micrometers, gauges), • Ability to independently perform machine setups, • Experience in aerospace or high-precision manufacturing environments, • Familiarity with CAD/CAM software (e.g., Mastercam) and G-code programming, • Experience machining aluminum, composites, or aerospace alloys, • Ability to stand and walk for extended periods of time., • Ability to use hands and fingers to perform repetitive and precision tasks., • Ability to climb, balance, bend, stoop, kneel, and reach as required to perform job duties., • Ability to communicate effectively, including talking and hearing., • Ability to work in, on, around, and in proximity to large structures, equipment, and tooling., • Ability to lift, push, and/or carry items up to 40 pounds as required., • Ability to work near moving mechanical parts and equipment., • Ability to work in and around tight or confined spaces., • Medical, dental, vision, • 401(k) (pre-tax & Roth), • Life insurance, disability coverage, • HSA, transportation benefits, • Employee Assistance Program, • Up to $5,000 in temporary housing (first 3 months) This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking a Quality Control Technician 3rd shift for our client in the Manufacturing domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Permanent position, and the client is looking for someone to start immediately. Duration: Full-time Location: Fort Worth, TX Salary: $54,000/Annually Role: Quality Control Technician (3rd shift) Primary Skills: Engineering Role Description: The Quality Control Technician must have 3+ years of experience. The Quality Control Technician is responsible for incoming inspection of molded and purchased parts to ensure conformity to company engineering and quality standards. Primary focus will be completing inspections in an expedited manner in support of the manufacturing process. This position may also require that the product is promptly and accurately put into the warehouse after passing incoming inspection and QA audit. Secondary focus may include first article inspections (FAI) on purchased metal and plastic components. Essential Duties and Responsibilities (other duties as assigned): • Conduct inspections as per documented instructions using MicroVu vision system, calipers, micrometers, or other devices., • Examines material or product for surface defects such as cracks, pits, and short shots., • Measures and electronically record dimensional data to ensure part compliance with part print., • Compares product with written standards such as print specifications to ensure conformance with product requirements., • Communicates status of part examination to the Tooling, Molding, and Quality teams., • Generate quality advisement documentation and provide reports to QA Engineers or Supervisor., • Generate emails to report findings and follow up with disposition of stock., • Work with warehouse personnel to place components into stock after QA approval., • Complete calibration and maintenance of inspection equipment., • Rejects defective parts, and marks type of defect on part, container of parts, or inspection tag., • Assists in investigation of defective parts using written standards and data collected from the molding process to determine the root cause of the defect., • Provide support to assembly, molding, kitting, warehouse, or other departments when needed., • Perform other duties as assigned by immediate supervisor (written or verbal). Requirements Education and Skill Requirements: • One-year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience., • Associate’s degree in engineering or science preferred., • Ability to read and understand detailed parts and assembly prints., • Proficient in Microsoft Office, specifically Excel and Outlook., • Good communication skills and follow-through on assigned tasks., • MicroVu or other measurement equipment experience preferred. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 plus pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. Education: High School Experience: Minimum 3+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Devyanshu Pawar Recruiter Phone: 412-490-7931 Benefits: This is a direct hire position, and the hired applicant will receive our client’s benefits package. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Job Summary Company NextGen Security, LLC Location Dallas, TX Industries Security Integration Job Type Full Time Employee Years of Experience 3-5 years of industry experience Career Level Senior Sales Person Exemption Exempt Senior Account Manager About the Job What we’re looking for: We are seeking an experienced sales person in the security industry to join our fast-growing and dynamic team. What you’ll be doing: This position will have multiple roles ranging from: developing new business, managing new and existing client needs, presenting solutions, technical knowledge for a broad range of products, working with operations and engineering on a regular basis to develop proposals and management of client security initiatives. Some travel may be required. • Management of customer accounts., • Regular communication with customers., • Assist in the management of projects with the Operations team., • Work independently without supervision., • Follow-up with customers and their requests., • Development of Account Manager and assist them as needed., • Project estimating., • Business Development., • Networking with vendors, suppliers and industry contacts., • Creation of quotes and scopes of work. What you bring to the table: • Excellent written and verbal communication skills., • A positive, collaborative attitude with a willingness to interact with customers, co-workers and other personnel., • Ability to manage multiple projects simultaneously with razor-sharp focus on the details., • A commitment to integrity and our Company Standards and Procedures., • BA/BS degree or equivalent. What we bring to the table: • An awesome, collaborative culture., • Compensation based upon background and experience., • Full benefits package., • Vacation., • Cellphone Allowance. We are an equal opportunity employer and drug- free workplace. Pre-employment drug screens and background checks will be conducted. Employees are subject to appropriate routine drug screens, based on job classification. Application Process Please submit your resume, references and your requested salary range when applying for this position to . More About Us NextGen Security is an electronic security systems integrator that offers commercial and industrial companies best in class industry knowledge, engineering design, implementation, management and on-going maintenance services. Our company accomplishes this by hiring only the most experienced and best-qualified talent the security industry has to offer. Management team and staff members have 10-25 years of commercial and industrial security industry expertise with single site, multi-facility, plant-wide, campus-wide, regional, national and international security projects. If that wasn’t convincing enough, check out what our employees say about working at NextGen: Notice To Employment / Recruitment Agents Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from NextGen Security’s HR department. Any agency candidate submission may only be submitted to positions opened to the agency through openings available via NextGen Security’s website. NextGen Security will only pay a fee for candidates submitted or presented where there is a contract communication in place between the Employment / Recruitment agents and NextGen Security, and only if the candidate is submitted via approval from NextGen Security’s HR department. Candidates submitted or presented by Employment / Recruitment Agents without a full approval from NextGen Security’s HR department shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.

Job Description Job Summary Company NextGen Security, LLC Location Dallas, TX Industries Security and Surveillance Job Type Full Time Employee Years of Experience 5+ years of installation experience in security industry Career Level Experienced (Non-Manager) Exemption Non-Exempt Senior Technician About the Job What we’re looking for: We are seeking an experienced electronic security installation technician to join our fast growing and dynamic team. What you’ll be doing: This position will have multiple roles ranging from: project oversight in the field, system programming, project activation and commissioning, installation of field devices, and most importantly, servicing of high-end integrated security devices. Extensive weekly travel will be required. What you bring to the table:  Minimum of 5 years of experience with installing and maintaining: • Enterprise-level access control systems  Superior problem solving and communication skills.  Work independently with minimal supervision.  Familiarization with local electronic security codes and industry standards. Understanding and ability to work safely in a chemical plant environment.  Experience with AutoCAD, Visio, MS Project and other Microsoft products. Preferred  Access Control System Vendor Certifications in Software House, Genetec, ProWatch and/or Lenel.  Video Management System Vendor Certifications in Genetec, OnSSI, MaxPro, Avigilon, and/or Milestone.  Experience in computer operating systems, network design and implementation. TWIC Cardholder. What we bring to the table:  Compensation based upon background and experience.  Company vehicle.  Full benefits package.  Vacation.  Cellphone Allowance. We are an equal opportunity employer and drug- free workplace. Pre-employment drug screens and background checks will be conducted. Employees are subject to appropriate routine drug screens, based on job classification. Application Process · Please submit your resume, references and your requested salary range when applying for this position to . More About Us NextGen Security is an electronic security systems integrator that offers commercial and industrial companies best in class industry knowledge, engineering design, implementation, management and on-going maintenance services. Our company accomplishes this by hiring only the most experienced and best-qualified talent the security industry has to offer. Management team and staff members have 10-25 years of commercial and industrial security industry expertise with single site, multi-facility, plant-wide, campus-wide, regional, national and international security projects. If that wasn’t convincing enough, check out what our employees say about working at NextGen: Notice To Employment / Recruitment Agents Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from NextGen Security’s HR department. Any agency candidate submission may only be submitted to positions opened to the agency through openings available via NextGen Security’s website. NextGen Security will only pay a fee for candidates submitted or presented where there is a contract communication in place between the Employment / Recruitment agents and NextGen Security, and only if the candidate is submitted via approval from NextGen Security’s HR department. Candidates submitted or presented by Employment / Recruitment Agents without a full approval from NextGen Security’s HR department shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.

Job Description For those who’d rather be on the move than behind a desk. We’re opening our 2026 hiring pipeline now for curious, adaptable problem-solvers who love travel, hands-on work, and being part of a team that actually knows your name. If you’re the kind of person who can laugh through flight delays, figure things out on the fly, and find satisfaction in solving complex problems, this might be your perfect fit. We believe in transparency. Our four-week paid training is designed to prepare technically skilled individuals for the field. Success in training requires a basic foundation in electrical systems, programming, and communication networking. If you’re new to these areas, this role may not yet be the right fit. Why You’ll Love Working With Us Work + Travel, Combined. You’ll experience new cities, tackle unique projects, and earn all your own travel rewards while working directly with customers across North America. There is no office to report to, and you’ll be away from home while you’re working. Fair Pay That Grows With You. Starting salary $60,000–$75,000, depending on location, education, and experience. You’ll also receive per diem for meals, mileage reimbursement, utilization bonuses, weekend bonuses and more. We don’t have endless budgets, but we do have trust, teamwork, and appreciation of knowing every person by name. Room to Grow. We invest in your development through paid training, annual merit raises, and a 5% salary increase after six months. Learn, advance, and build a career that can take you in multiple directions. We will be your biggest cheerleaders of growth, even if you’re not with ProAutomated forever. Real Benefits + Real Flexibility. Health, dental, and life insurance, a matching 401(k), short & long term disability options, paid vacation, and flexible time off after 18 months. We take care of you, on and off the job. A Team That Gives You Community. We’re a smaller, people-first company where teamwork, adaptability, and humor are part of the job. All of our leaders have grown into their positions at ProAutomated, so your manager has done what they’re asking you to do. We hold each other to high standards, accept none of us are perfect, and push for excellence. You’ll be surrounded by people who have your back. What You’ll Do You’ll be part of the team that keeps automation projects moving. At ProAutomated, we don’t install systems, we partner with system integrators and manufacturers to ensure everything works flawlessly when it matters most. • Support data center startups, performing on-site mechanical, electrical, and control checks., • Lead startup, checkout, and acceptance testing for warehouse fulfillment and manufacturing systems in industries like food and beverage., • Partner with automation and controls engineers to test, troubleshoot, and validate their systems on-site., • Provide clear communication and updates to customers and project teams to keep progress smooth and accurate., • Typical travel rotations follow a days on & off schedule: 5 on - 2 off, 10 on – 4 off, or 14 on – 7 off. Every project brings new challenges and new locations., • Work with various customers, getting invaluable real world experience with massive companies, but with the ProAutomated team supporting you.What We’re Looking For, • A genuine love of travel, expect to be away from home on rotation (we’ll handle the logistics)., • Preferred experience: have a working knowledge of electrical systems, programming, and communication networking skills., • Adaptability and grit, you thrive when plans change and challenges pop up., • Strong communication and problem-solving skills., • Must live within 50 miles of a major airport (relocation assistance available)., • Personal vehicle within 45 days of employment (for local projects)., • Authorized to work in the U.S., • A technical degree or equivalent hands-on experience (3+ years) in a related field such as electrical, mechanical, or automation engineering. Physical Requirements The below physical requirements are considered essential functions of the role. • Ability to walk long distances across large facilities or job sites as part of daily work activities., • Climb ladders, stairs, or work at heights., • Lift, carry, and move up to 50 lbs., • Stand, kneel, or reach for extended periods Apply now to get on our radar for early 2026 hiring. Principals only — recruiters, please do not contact. ProAutomated is an Equal Opportunity Employer. We value diversity and are committed to creating an inclusive environment where all team members feel respected and supported. Employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or any other protected status. Powered by JazzHR zscoqVGR3u

Job Description Business Development Representative COMPANY DESCRIPTION: Paxon Energy is a fast-growing leader supporting major gas and electric utilities nationwide. We specialize in high-quality inspection, safety, and field services that keep energy systems safe, reliable, and running strong. Our teams thrive in a people-first, safety-driven culture where talent is valued and growth is encouraged. Join Paxon and be part of a team powering the future of energy. JOB TYPE: Full Time with eligibility for full benefits. LOCATION: Remote, you will be required to travel for this position, but your base of operations can be anywhere in the Continental U.S. COMPENSATION: Salary - $120k to $150k per year + Commission and Expenses– Exempt, Final compensation will be extremely competitive for this market and negotiated upon offer of employment. POSITION SUMMARY: Our Business Development role supports company growth by identifying potential business opportunities, discovering, and pursuing leads, and engaging in client outreach. You will help develop proposals, build client relationships, create and execute sales plans for specific accounts. This is a crucial role as part of our sales team in converting leads into loyal customers. High energy and effective communication skills are required for this role. Responsibilities: (Disclaimer: The lists below are not all inclusive) Core: • Market Research: Analyze market trends, competitors, and potential growth areas., • Opportunity Identification: Identify new clients, markets, or service opportunities., • Relationship Building: Cultivate strong ties with clients, partners, and stakeholders., • Strategy Development: Create plans for specific assigned existing and new account growth, and sales development., • Proposal & Negotiation: Collaboratively develop proposals and foster contract negotiations., • Cross-Functional Collaboration: Work with Sales, Marketing, and operational Service teams. Typical Duties - • Attending industry events., • Daily search to uncover leads., • Develop and deliver presentations per the company guidelines., • Monitoring project execution for contracts., • Business Development: Focuses on long-term strategies, develop new markets, and encourage partnerships., • Strategic thinking and analytical skills, • Excellent communication, presentation, and networking skills, • Strong business acumen and negotiation ability Required - • Bachelors Degree - Business, Industrial Technology, Agribusiness, Engineering Technology, Engineering., • Five to fifteen years in the Energy Industry, • BD / sales experience, • Internal and external communication skills, • Sales or Business Development Certifications (e.g., Professional Certificate in Business Development), • Specific Experience in Construction Management and Inspection Services (Midstream, Transmission, Distribution) We are committed to providing a diversified workforce to our clients: Paxon Energy & Infrastructure is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. We invite resumes from all interested parties including women, minorities, veterans, and persons with disabilities. All qualified applicants will receive consideration for employment without regard to their protected veteran status and will not be discriminated against based on disability.

Job Description Fabrication Supervisor Job Summary: This position is responsible for the performance and oversight of high quality, safe, reliable, timely and cost-effective operation of the company’s fabrication department, consisting of the Machine Shop, Sheet Metal Shop, and Paint Shop in support of the company’s production schedule. Job Responsibilities: • Supervise day-to-day operations of the fabrication department., • Assign work orders to machinists, sheet metal workers, and painter and obtain fixtures, special tools, and materials required to complete the fabrication processes and track work order progress., • Coordinate with other department supervisors such as Production Assembly and Inventory Control to ensure parts are available when needed., • Track and analyze work order hours to detect and correct manufacturing deficiencies., • Track and present repair department performance metrics to senior management, as required., • Analyze engineering drawings, sketches, and design data of a part to determine dimension and configuration of cuts, select cutting tools, and establish machining speeds and feed rates., • Write CNC programs to manufacture parts as required by production work orders and approved Request to Production, focusing on minimizing manufacturing costs and optimizing quality., • Upload programs into production CNC machinery, load tooling, and perform set up operations as required by the program., • Operate CNC machines to manufacture parts as required by production work orders and approved Requests to Production., • Store and back up CNC programs in a centralized location., • Maintain a current revision log of CNC programs., • Coordinate with the maintenance department to schedule Preventative and Periodic Maintenance on CNC machines., • Analyze work orders and other applicable documents to determine materials needed, sequence of operations, and equipment required, and assign work to appropriate Machinists., • Train other Machinists in equipment operation and other tasks associated with machining parts., • Working from blueprints and standardized work instructions, perform machine operations on manual Machine Shop equipment such as lathes, milling machines, and grinders, to manufacture parts as required by production work orders and approved Requests to Production., • Devise, construct and maintain fixtures, tools, dies, gauges and equipment to facilitate manufacturing., • Provide technical assistance to the Engineering Department in relation to machining operations and departmental capabilities., • Provide estimates on machining time as required from management., • Education: High school graduate, 3 years technical school preferred; 1 year general machining, 1-year general metallurgic manufacturing, • Experience: Minimum 3 years of CNC programming and operation (GIBBS CAM preferred) and 3 years in general Machine Shop work., • Skills: Must possess strong work ethic and organizational skills. Ability to effectively prioritize and manage competing demands. Ability to provide leadership, supervise and adapt in a dynamic work environment. Intermediate knowledge of shop mathematics. Intermediate knowledge in general and aerospace machining best practice techniques and the ability to read blueprints and data sheets., • Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to stand, reach, grasp, lift and is subject to frequent repetitive motion and vibration. The employee is frequently required to use hands to finger, handle and feel. The employee is occasionally required to sit, walk and hear. The employee must occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision and depth perception. The visual acuity to perform an activity such as: machine set up and usage; visual inspection of parts using precision measuring devices to verify the accuracy of the work performed., • Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee is frequently in an environmentally controlled shop environment. The employee is frequently subject to hazards. Includes working in very close proximity to moving mechanical parts. The noise level is quiet to moderate. We offer an excellent benefits package, including life insurance, comprehensive medical and dental plan, profit sharing and retirement plan, paid holidays, vacation and PTO. Salary will be commensurate with experience, education and ability. EEO/AA/F/M/Vet/Disabled

Job Description Hazen and Sawyer is seeking an entry-level engineer for our Fort Worth office. As part of our design and process teams, you will work on water and wastewater projects, including drinking water/wastewater/reuse treatment facility upgrades, conveyance systems, wellfields, stormwater management, water resources, and asset management. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Assist in preparing engineering deliverables, including sampling studies, condition assessments, process modeling, hydraulics, and design reports, • Work directly with senior level engineering team providing mentoring opportunities to learn and develop, • Manage data for process modeling and design, • Attend client and internal project management meetings, • Coordinate with manufacturers and vendors to select equipment, • Support multiple projects from planning through construction, • Participate in fieldwork and site visits (mostly in-state), • B.S. in Environmental, Civil, Chemical, or Mechanical engineering, • Strong interest in the water/wastewater industry, • Strong communication skills, self-motivation, organization, and attention to detail, • Must be proficient in Microsoft Office Suite, • EIT certification, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionAt Baird, Hampton & Brown, our mission is building partners through creative, sustainable engineering solutions, and honest, long-term relationships. With over 30 years in the business, we understand that a solid foundation is necessary in every aspect of what we do. We support our team members in pursuing excellence in their fields and balancing their lives. We serve our clients with integrity, communication, and involvement at every stage. As a team member, you can trust BHB to champion our core values, which leads to healthy, mutually beneficial relationships as well as services of the highest caliber. We are currently seeking a full-time, exempt Graduate Civil Engineer. As an entry level position, the Graduate Civil Engineer, will learn how to work on civil projects for municipal governments and private developments. Working closely with Professional Engineers, Engineers-in-Training, and Designers, you will first develop the technical processes to create civil drawings under the direction of a Project Manager. During this time, you will also develop professional skills, learning the business and client side as well as the process to eventually manage the full scope of a civil engineering project. In this role you can expect to perform the following tasks. This is not an exhaustive list: • Analyze and interpret survey reports, maps, drawings, blueprints, aerial photography, and other topographical or geologic data to plan projects., • Plan and design transportation or hydraulic systems and structures, following construction and government standards using design software., • Analyze and produce designs for stormwater, sewer, pipeline, parking, sidewalks, roadway, etc. using design software., • Prepare site grading and utility plans, coordinating with municipal parties. Perform hydraulic calculations and prepare construction documents for permitting., • Compute load and grade requirements, water flow rates, or material stress factors to determine design specifications., • Degree in Civil Engineering from an ABET-accredited program, • Engineer in Training certification or the ability to receive in one year, • Any experience in designing for civil projects or performing calculations; land development, commercial, industrial, land development, retail, education, municipal, roadways, water resources, or utilities. Position Type and Schedule This is a full-time, exempt position, with an expectation to work 40 hours per week. BHB offers flexible scheduling options, including five 8-hour days or four 9-hour days with a half day on Friday morning. While the start and end times of the workday can be adjusted, employees are expected to establish and maintain a consistent schedule which must encompass the core business hours of 9am – 4pm. Although overtime is not required, it is requested at times to meet our clients’ needs. Benefits We believe that taking care of our employees and their families is vital to our success. For several years, BHB has been awarded the titles of "Best Place for Working Parents" and Zweig’s "Best Firms to Work For." BHB sponsors employee medical, dental, vision, short-term & long-term disability, and basic life insurance, as well as subsidizing a significant family portion. BHB also offers voluntary life and disability insurances, paid parental leave after 12 months of employment, a PTO bank immediately available, & 401(k) matching. We believe in lifelong learning: providing many internal & external training opportunities including formal & informal mentorship programs. We sponsor multiple professional & industry memberships, licensure, and leadership opportunities. More details regarding benefits will be provided during the interview process. Equal Employment Opportunity Baird, Hampton & Brown is an Equal Opportunity Employer. All employment decisions are based on qualifications, merit, and business need. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, age, sex (including pregnancy & childbirth conditions), sexual orientation, gender, gender identity, expression, or status, mental or physical disability, genetic information, military or veteran status, citizenship, or any other status or characteristic protected by applicable law. Powered by JazzHR MzlJcjThTU

Job Description The CAD Technician is part of a civil engineering design team involved in a variety public infrastructure and transportation improvement projects (i.e., streets, drainage, water, sanitary sewer, etc.). The position is a lead technical support role in our Fort Worth Headquarters. Responsibilities/Expectations: Responsibilities require being actively engaged in plan production and design of projects. More specifically, responsibilities include: -Using established CAD standards to prepare electronic drawings from minimum marked-up plans and/or verbal instruction by engineers/designers -Oversight of CAD systems management, refinement and evolution of standards -Organizing and scheduling your own work, and at times, the work of other team members to accomplish project goals within established budgets and schedules -Coordination with engineers and other design team members -Plotting and assembling construction plans Requirements At a minimum, candidates must meet the following educational and professional requirements: Education/Certification -High School graduate or GED required -Post-high school technical coursework, certification or degree in computer drafting/design or related field preferred Professional -Responsive and results-oriented in service to clients -2-4 years of civil CAD experience and understanding of a variety of projects including residential subdivisions, public infrastructure improvements (i.e., streets, drainage, water, sanitary sewer, etc.), site development projects involving parks, schools, churches, hospitals, and retail/commercial centers -Proficient in the latest version of Bentey Microstation and OpenRoads Designer, 2D and 3D drafting, as well as Microsoft Word and Excel -Demonstrated ability to develop solid working relationships with other team members -Ability to quickly adapt to and adopt new CAD standards and procedures -Commitment to quality in the design and presentation of drawings -Prior Subsurface Utility Engineering (SUE)/utility experience is preferred but not required To learn more about TNP’s culture, visit our website at . Benefits Compensation: Compensation includes: · A competitive hourly wage, dependent on skills, qualifications, and experience · Overtime pay for additional hours worked in excess of 40 hours · Generous year-end performance-based bonus opportunities Benefits: Excellent company benefits are also provided, including: · Medical, dental, and vision insurance, all beginning on the first day of employment · Life and disability insurance · A 401(k) plan with a partial company match · A Health Savings Account · Paid time off · Onsite gym · An extensive learning and development program · Tuition reimbursement · Financial Advising TNP is an Equal Employment Opportunity Employer. The organization will not discriminate against any individual because of race, color, religion, creed, sex, age, national origin, disability or other reason prohibited by the fair employment laws. Reasonable accommodation will be provided in an effort to advance employment opportunities for individuals with disabilities. Employment at TNP is on an at-will basis. The employee and the organization are each free to terminate the relationship at any time without cause.

Job Description JOB DESCRIPTION Exercises general supervision over catering operations for both Dickies Arena ticketed events included but not limited to the FWSSR, concerts and sporting events as well as large scale private functions up to 1600 guests. The Catering Manager must provide strong leadership direction, support and guidance to part-time catering team members as they plan, prepare and execute each unique event. This position is responsible for ensuring that alcoholic beverages are served safely, and that food quality and sanitation standards are always maintained. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. • Responsible for the overall success, communication and coordination of all events executed at Dickies Arena and/or by TDMC., • Develop and Manage Part-Time Leaders, • Must hire and maintain a complete catering staff to include servers, bartenders, supervisors, etc., • Responsible for training all team members, • Will take from existing training collateral to further develop and establish catering policies and practices., • Must ensure all staff are properly and consistently scheduled in accordance with time and attendance guidelines., • Will work closely with culinary/F&B leadership team counterparts daily., • Will need to plan menus and staff events within budget monitored by Manager of Catering and Events, • Responsible for the accuracy of billing communication with all clients and/or financial counterparts within the organization accordingly., • Must communicate consistently with all building related counterparts such as operation and engineering to ensure event specific needs are documented and discussed in advance of each event., • Will work closely with tour representatives, VIP event coordinators, as well as internal event counterparts in conjunction with each event., • Ability to identify and/or oversee special projects to better the department and/or arena as identified or assigned., • Have knowledge of all building related policies as they pertain to responsible alcohol service, general sanitation, safety and security., • Engage with venue guests, as well as team members to ensure exceptional hospitality is always received., • Other responsibilities and tasks as deemed appropriate by the Dickies Arena Leadership Team., • Engage with venue guests, as well as team members to ensure exceptional hospitality is always received., • Assist the Manager of Catering and Events with BEO builds and update of all computer software/ Point of Sale System with the appropriate event information, menu selections, item descriptions, and prices., • Have complete knowledge of all menus, items, ingredients, and presentations., • Conduct pre-shift meetings., • Visit each catering location to ensure the atmosphere and quality of the presentation reflects the Dickies Difference for our clients and their guests before they arrive., • Expedite the communication of special food and beverage requests, late food and beverage orders, changes to any food and beverage orders, and guest-related issues to the appropriate entities. QUALIFICATIONS: • Successful track record for 3+ years in Food and Beverage Leadership with a preferred focus on Catering Management in a full-service resort, hotel, or convention center executing and overseeing every type of event, • Experience in a range of catering formats including but not limited to plated and buffet service., • Track record of organizing and planning events that serve a wide range of guests, • Robust understanding of Operations, as well as Food & Beverage and each department’s relationship to large scale events (A/V, set ups, costings, planning, etc.), • Attention to detail, • Excellent written and verbal communication skills, • Working knowledge of Catering Software, • Working knowledge of basic PC applications (Microsoft Word, Excel, Outlook, etc.), • Experience, implementing and operating Point of Sale, On-line Ordering and purchasing related technology, • Experience with computerized workforce management software is strongly preferred, • Solid organizational skills with the ability to handle multiple projects at one time, • Must be able to work extended shifts of 10 hours or more as business dictates, • Must be flexible with schedule and able to work different shifts, • Ability to work nights, weekends and holidays, • Must be able to work in fluctuating temperatures, • English reading, writing, comprehension, math and computer skills required, • Ability to taste and evaluate food and beverage products, • Must be able to reach, lift, stoop, bend and perform extensive standing and walking (including stairs) throughout shift, • Ability to use hands in using office equipment, including the computer system, • Ability to express or exchange ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly, or quickly, • Ability to perceive the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication, and to make the discriminations in sound. Ability to talk and hear to conduct phone and radio correspondence, • The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; determine the accuracy, neatness, and thoroughness of the work assigned; visual inspection involving small errors and/or operation of machines (including inspection); using measurement devices; and/or assembly parts at distances close to the eyes INTELLECTUAL/SOCIAL, PHYSICAL DEMANDS AND WORK ENVIRONMENT: The intellectual/social, physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Intellectual/Social demands: • While performing duties of this job, the employee is frequently required to multi-task under time limits and with moderate to high pressure situations. Position requires constant attention to details and accuracy of specified standards including: following simple to complex (more than 3 steps) instructions, and concentration which frequently extends beyond 30 minutes at a time. This position also requires frequent use of interpersonal skills with internal and external clients. Employee will frequently communicate via radio and in-person with others and exchange accurate information. This position requires employee to frequently work both independently or as part of a team. Position also requires being able to recognize and resolve conflicts, by being able to openly communicate with clients. Physical demands: • While performing the essential functions of this job, the employee will frequently operate a POS system, computer and other office devices such as calculators, telephones, copy machines, faxes and printers. Employee will constantly move about inside and outside various areas of the facility before/during/after events to interact with internal/external clients and supervise the work of employees during events. Employee must constantly communicate via telephone, radio, email and in-person with others and exchange accurate information. Employee may occasionally be required due to business demands and event operations to lift and/or move up to 50 pounds. As business, maintenance, operations or emergency situations require, employee may sporadically assist in lift/move 100 lbs. or more. Work environment: • The duties of this position are performed primarily indoors but do require frequent movement in and out of controlled temperature units such as refrigerators and/or freezers. The noise level in the work environment is usually moderate, with the exception of event days, where the sound levels may be higher than moderate. Employee will be occasionally exposed to outdoor weather conditions, year-round. Employee will be exposed to and working in extreme temperatures when utilizing various pieces of equipment.

Job Description Petmate is a global leader in pet supply products. Some of our most beloved brands include Petmate®, Chuckit!®, Quirky Kitty®, Vittles Vault®, Wild Eats® and Arm & Hammer®. Over 60 years ago, Petmate began with a single focus on providing safe pet transportation, which resulted in the creation of the first dog kennel. Flash forward to today, and the same love and bond that existed to provide safe travels for our pets now permeates through every step of pet and pet owners’ shared adventure. Knowing that pets are every bit as much a part of the family, Petmate takes pride in developing new, superior products that improve the quality of life and enrich the bond created between people & their pets. From environmentally responsible manufacturing to rigorous product testing, we place safety at the core of what we make and how we make it. Our trusted brands continually drive innovation across pet categories, spanning dog and cat toys, feeding and watering, food storage, carriers, shelters, treats & chews, bedding and more. OUR WHY: To enrich the lives of families by cultivating the bond between people & their pets OUR VISION: Families everywhere trust us more than any other company to enhance the well-being of their pets at every step of their adventure Petmate Core Values OWN IT! We take full responsibility for our actions, decisions, and their outcomes STEADFAST DETERMINATION: Steady pursuit of what's next with unwavering commitment and enthusiasm DO THE RIGHT THING: Consistent alignment of actions and values in every situation, ensuring you're always true to what's right SAFETY WITHOUT COMPROMISE: We prioritize the safety of employees, consumers, and pets without compromise POSITION SUMMARY Reporting to the Chief Operations Office, the Director of Quality and Compliance will lead and support Petmate’s strategic, tactical, and operational efforts in product quality, regulatory and social compliance commitments. This position will be onsite at the Corporate Headquarters in Arlington, TX ESSENTIAL DUTIES AND RESPONSIBILITIES This position will work cross functionally with the product management team, brand marketing team, Petmate sales teams, US manufacturing and Asia operations. • Understands the requirements to effectively support all activities related to the three aspects of this job: Reliability Engineering (from concept to final design), Manufacturing Quality (for “make” and “buy” items), and Compliance., • Manages communication between US operations, Asia Team, customers, and vendors to drive global process improvement & efficiency within the team., • Manages following a strategy of Continual Improvement, with strong management skills to influence the organization to execute tasks on time and on budget., • Manages all Corrective Actions with all stakeholders and meet all committed deadlines., • Possess knowledge and strong skills to interpret industry & retailer test methodology/requirements, social compliance standards, auditing procedures and inspection practices., • Serves as the leader of Petmate social compliance audit, quality management systems audit, regulatory compliance and production testing., • Responsible for evaluation & reporting of all audit data in all customers’ portals or written reports. Manages corrective action plans for audits and factory inspection activity., • Assists cross-functional teams and suppliers with interpretation of inspection, test & audit data., • Advanced/Expert level proficiency and interpretation to regulatory requirements of California Proposition 65, CPSIA, FDA, AAFCO, REACh, ISTA, ASTM F963/EU EN-71, TSCA/EPA/CARB, Conflict Minerals & Code of Federal Regulations (CFR)., • Support to sales team for reporting & communication of sustainability (measurements, reporting, benchmarking, best practice implementation), conflict minerals compliance and federal & state law/regulations., • Establishes and manages annual volume of third-party testing, inspection and audits. Develops and manages annual QA budget., • Maintains internal quality and compliance manuals & SOPs. Reviews and updates these manuals on a yearly basis or as necessary., • Works with designated third-party service providers in the maintenance and development of testing protocols., • Develops and oversees quality reporting that supports corporate quality improvement strategies for factories and product., • Understands, plans and adapts retailer requirements into existing Petmate program. Communicates directly to retail partners for various programs (quality testing, factory social compliance, quality concerns, sustainability surveys, quality systems & security audits), • Manages the team of QC inspectors to support all manufacturing activities at Petmate’s factories. ADDITONAL SKILLES AND KNOWLEDGE PREFERRED • Solution oriented with demonstrated problem solving skills in a structured manner., • Ability to perform in a rapidly changing multi-task environment., • Facilitates a risk-aware culture with proactive communications., • Strong ability to set priorities based on risk and mitigating risk., • Goal oriented with demonstrated ability to meet internal and customer deadlines. MINIMUM QUALIFICATION REQUIREMENT • Minimum 8+ years related experience in quality and compliance aspects (product testing, inspection & regulatory compliance), • Expert level knowledge of best-in-class tools to drive quality and compliance risk assessment to drive a proactive approach to quality and compliance (CTQ, FMEA, QC Protocols, SPC, …), • Expert level knowledge in quality testing, social/ethical compliance and inspection practices., • Advanced Microsoft Office skills (MS Word, Excel, Visio), • Excellent oral, written, and interpersonal skills., • Good organization skills, multi-tasking, and ability to handle concerns and questions., • Ability to read and comprehend work instructions, correspondence and memos., • Effective presentation skills., • A team player who collaborates and cooperates with colleagues in a positive manner to achieve Company goals. Petmate is an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law.

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. Overview We are seeking a Configuration Management (CM) Engineer to own and enforce product configuration control across engineering, manufacturing, and supply chain systems. The ideal candidate has a strong understanding of class I vs class II changes, product lifecycle management (PLM), and ERP bill-of-material (BOM) integrity. This role ensures that as-designed, as-planned, and as-built configurations align at every stage of production. Key Responsibilities - Define, implement, and enforce configuration control rules, including Class I vs Class II change thresholds (engineering vs minor production impacts). - Manage and maintain BOM integrity across ERP, PLM, and MES systems. - Perform as-built vs as-designed audits, ensuring hardware traceability between work orders, BOM revisions, and engineering documentation. - Collaborate with engineering to validatepart numbers, revisions, and metadata before release to the BOM. - Liaise with Planning and Production Control to ensure ERP BOMs accurately reflect approved configurations and effectivity dates. - Create and maintainchange control documentation, including ECOs, ECRs, deviations, and waivers. - Support ERP/PLM data migration, part-number standardization, and revision control efforts. - Develop configuration baselines for prototype, qualification, and flight hardware. - Participate in internal audits and ensure compliance with AS9100, ISO 9001, and company-specific QMS requirements. - Serve as a subject matter expert for configuration management processes and digital thread traceability. Qualifications - Bachelor’s degree in Engineering, Manufacturing Systems, or related field. - 5–10 years of experience in Configuration Management, Product Lifecycle, or Systems Engineering within aerospace, defense, or complex hardware manufacturing. - Proven experience with ERP (e.g., NetSuite, SAP, Oracle) and PLM (e.g., Arena, Teamcenter, Windchill) systems. - Strong understanding of Engineering Change Control (ECO/ECR) and revision management. - Familiarity with BOM structures, serial number traceability, and work order management. - Excellent attention to detail, documentation, and cross-functional communication skills. - Knowledge of AS9100, ISO 9001, and ITAR compliance preferred. Why E-Space is right for you: As a member of our team, you will play a crucial role in driving our success. Our team members have a strong sense of dedication and responsibility; this includes a strong commitment to our mission to create an entirely new suite of global capabilities to improve lives, business efficiencies and build a smarter planet. This means that there will be times when extra hours, including nights and weekends, may be needed to meet critical deadlines and mission goals. In return, we offer a dynamic work environment with opportunities for professional growth and development and the chance to make a meaningful impact in a high-growth industry. We want you to make the most of your journey at E-Space. That’s why we support and invest in the physical, emotional and financial well-being of our team members and their families. Some of what you can expect when working at E-Space: • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionCompany Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programs as we turn challenge into opportunity and complexity into success. Our capabilities include program, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority interest. Turner & Townsend and CBRE work together to provide clients with the premier program, project and cost management offering in markets around the world. Job Description Turner & Townsend is seeking an experienced Senior Cost Manager / Quantity Surveyor to support a major, multi‑phase data center construction program in the Abilene, TX / Shackelford County region. The development spans a large multi‑building campus, currently underway, with long‑term phased delivery extending over several years. This role will be central to maintaining cost governance, commercial rigor, and alignment across a large, complex site with significant civil, structural, and MEP scope. You will serve as a key day‑to‑day client interface, ensuring disciplined cost controls, clear communication, and strong stakeholder coordination. The ideal candidate brings robust construction cost expertise, operates confidently in a client‑facing environment, and contributes to a high‑performing project team. Travel, Per Diem & Relocation: • Per diem provided for required travel., • Mileage reimbursement available for candidates living within driving distance., • Relocation assistance is available for candidates interested in moving closer to the site. Responsibilities • Develop and maintain detailed cost plans, budgets, and estimates throughout design and construction., • Prepare and present monthly cost reports, forecasts, and executive‑level summaries., • Coordinate cost data from designers, contractors, subcontractors, and vendors for accurate validation., • Maintain benchmarking and built‑cost records to support program‑wide improvements., • Lead procurement support activities, including pricing reviews, scope validation, and commercial negotiations., • Manage final accounts and drive timely agreement., • Oversee full change‑management workflow, ensuring changes are reviewed, evaluated, negotiated, approved, and accurately tracked., • Maintain rigorous cost‑control systems, monitoring commitments, variances, and trends., • Support contingency and cost‑risk analysis activities., • Coordinate cost, schedule, and scope alignment with project controls teams., • Lead value‑engineering and cost‑optimization efforts across phases and trades., • Monitor market conditions and provide commercial insights., • Serve as a primary client interface, ensuring objectives and expectations are met., • Prepare clear commentary on contractor submissions and support governance reviews., • Ensure compliance with Turner & Townsend Business Management Systems., • Mentor junior team members and contribute to a collaborative, high‑performance culture., • Support financial management tasks including margin tracking and resource forecasting., • SOX control responsibilities may be part of this role, which must be adhered to where applicable.Qualifications, • Able to work on‑site in the Abilene, Texas area with hybrid flexibility; per diem, travel, or relocation support available., • Bachelor’s degree in Quantity Surveying, Construction Management, Engineering, or related field., • 5–7+ years of cost management or project controls experience on medium‑ to large‑scale construction programs., • Experience with mission‑critical, industrial, or large campus‑scale builds preferred., • Consultancy experience strongly preferred., • Strong understanding of civil, structural, and MEP construction., • Advanced competency in budgeting, financial reporting, forecasting, and cost‑control systems; EVM experience beneficial., • Proven ability to manage full change‑management processes on major projects., • Strong project controls understanding, including cost‑schedule integration and variance analysis., • Skilled in procurement support and commercial contract management., • RICS accreditation (or progress toward certification) preferred., • Excellent communication, negotiation, and stakeholder‑management skills., • High analytical capability and attention to detail., • Proficiency with standard cost management tools and Microsoft Office. Additional Information *On-site presence and requirements may change depending on our client's needs. Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Please find out more about us at and All your information will be kept confidential according to EEO guidelines. Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Job Description Job Summary Company NextGen Security, LLC Location Dallas, TX Industries Security Integration Job Type Full Time Employee Career Level Entry Level to Experienced Exemption Status Exempt Assistant Project Manager About the Job What we’re looking for: We are seeking an electronic security assistant project manager to join our fast-growing and dynamic team. This position will work directly with a Project Manager to assist in completing projects. What you’ll be doing: This position will have multiple roles ranging from: attending project meetings, assisting with resource scheduling, such as installation and subcontractor team coordination, onsite technician support, project quality control, staging of equipment, project documentation assembly and review, assisting with invoicing & project tasks, and most importantly, representing NextGen Security as the valuable point of contact for our valued customers. Local travel may be required for this position. What you bring to the table: • Bachelor’s degree in business or related field (preferred but not required)., • Prior internship experience within project management or related field (preferred but not required)., • Customer service experience a plus., • Strong organizational skills., • Superior problem solving and communication skills., • Ability to process and apply new skills/concepts quickly., • Work independently with minimal supervision., • Strong attention to detail., • Experience with Microsoft Office, Teams & Windows Operating Systems., • Experience with AutoCAD, Microsoft Project, Procore, and other project management & design products (preferred but not required) What we bring to the table: • An awesome, collaborative culture., • Compensation based upon background and experience., • Full benefits package., • Vacation., • Cellphone Allowance., • Career path options. We are an equal opportunity employer and drug-free workplace. Pre-employment drug screens and background checks will be conducted. Employees are subject to appropriate routine drug screens, based on job classification. Application Process Please submit your resume, references and your requested salary range when applying for this position to . More About Us NextGen Security is an electronic security systems integrator that offers commercial and industrial companies best in class industry knowledge, engineering design, implementation, management and on-going maintenance services. Our company accomplishes this by hiring only the most experienced and best-qualified talent the security industry has to offer. Management team and staff members have 10-25 years of commercial and industrial security industry expertise with single site, multi-facility, plant-wide, campus-wide, regional, national and international security projects. If that wasn’t convincing enough, check out what our employees say about working at NextGen: Notice To Employment / Recruitment Agents Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from NextGen Security’s HR department. Any agency candidate submission may only be submitted to positions opened to the agency through openings available via NextGen Security’s website. NextGen Security will only pay a fee for candidates submitted or presented where there is a contract communication in place between the Employment / Recruitment agents and NextGen Security, and only if the candidate is submitted via approval from NextGen Security’s HR department. Candidates submitted or presented by Employment / Recruitment Agents without a full approval from NextGen Security’s HR department shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.

Job Description • We are hiring immediately for FULL TIME JOURNEYMAN PIPEFITTER positions., • Location: Quantum - 5001 Blue Mound Road, Fort Worth, TX 76106. (Openings at other locations within school district available) Note: online applications accepted only., • Schedule: Full time schedule; days and hours may vary. More details upon interview. (Full and Part Time with the flexibility to meet most scheduling needs), • Requirement: 5-7 yrs experience preferred; trades license(s), • Pay Range: $28.00 to $32.00 per hour. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Quantum North America is a leading design-build firm specializing in Mechanical, Electrical, Plumbing, Installation, and Energy Engineering solutions. Since 2003, we've delivered reliable, cost-effective services across diverse markets nationwide. Headquartered in Dallas/Fort Worth, our team of 125+ professionals—including engineers, project managers, certified technicians, and skilled tradespeople—drives our consistent growth and reputation for excellence. With over 125 projects completed annually and operations in 30 states, we offer a collaborative, accountable work environment where innovation and client satisfaction are at the core of everything we do. As a member of Compass Group, North America, we want you to be as great as you can be. We empower our associates to direct their own future, keeping them confident that we support them every step of the way. As a result, our associates embody greatness through their actions, natural passion for quality, and a can-do attitude. The opportunity for greatness is real at Quantum North America and throughout the Compass world. Job Summary Summary: Assists with the day-to-day upkeep, maintenance and smooth operation of the building and campus. Repairs, maintains and assists in the installation of equipment. Essential Duties and Responsibilities: • Provides quality customer service by providing one-on-one attention to detail., • Cleans and polishes furniture and fixtures., • Performs minor repairs to doors, fixtures and furniture., • Records information from meters and gauges at specified intervals to verify operating conditions., • Makes adjustments and minor repairs to heating, cooling, ventilating, plumbing and electrical systems., • Regularly replaces HVAC air filters., • Monitors building security and safety by performing such tasks as locking doors after operating hours and checking electrical appliance use to ensure that hazards are not created., • Moves heavy furniture, equipment and supplies either manually or by using hand trucks., • Mows and trims lawns and shrubbery, using mowers and hand and power trimmers; clears debris., • Notifies managers about the need for major repairs or additions to building operating systems., • Removes snow from sidewalks, driveways and parking areas., • Sets up, arranges and removes decorations, tables, chairs, ladders and scaffolding to prepare facilities for events., • Ad-hoc cleaning of building floors by sweeping, mopping, scrubbing or vacuuming; gathers and empties trash; services, cleans and supplies restrooms., • Drives vehicles required to perform work., • Performs other duties as assigned. Qualifications: • Medical/Dental/Vision Insurance, • 401K with Company Match, • Disability Insurance, • Life Insurance/AD, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace & Employee shopping program, • Identity Theft Protection, • Pet Insurance, • And More… Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Mayland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. Applications are accepted on an ongoing basis. Quantum North America maintains a drug-free workplace. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: