Trabajos service technician en Boston, MACrear alertas

Job Profile Summary This role focuses on providing medical and clinical support services to patients. In addition, this role focuses on performing the following Surgical Services duties: Responsible for medical services involving the excision or incision of a patient's body, such as interventional pain management and other procedures. This position also works to provide a safe environment for patients undergoing invasive procedures or surgery. A clinical technologist role that has specialized knowledge or skills gained through a combination of vocational education, training, and experience. This role will be most commonly applied to patient care and/or scientific/laboratory jobs. An experienced level role requiring basic knowledge of job procedures and tools obtained through work experience and requiring vocational or technical education. Works under moderate supervision, works through problems of a routine nature, but may at times require interpretation or deviation from standard procedures and communicates information that requires some explanation or interpretation. Job Overview This position is a proficient Surgical Technician who practices under the supervision of the surgical team in the Operating Room to deliver patient care throughout the perioperative experience. Assists the Surgeon during surgery by providing the appropriate instruments and in maintaining and organizing operating room equipment. Performs according to the policies, procedures, philosophy, and objectives of the department and hospital. Works cooperatively within department and other services to create a system of quality health care. Job Description Minimum Qualifications: 1. High school diploma or equivalent., 2. Before July 1, 2013, employed as a surgical technologist in a surgical facility; OR Successfully completed a training program for surgical technology in the military; OR Graduated from an accredited Surgical Tech Program., 3. If employed as a Surgical Technologist after July 1, 2013, Surgical Technologist Certification (CST) is required., 4. 12 Months to Less than 3 Years of healthcare experience., 5. Basic Life Support (BLS) Certification. Duties and Responsibilities: The duties and responsibilities listed below are intended to describe the general nature of work and are not intended to be an all-inclusive list. Other duties and responsibilities may be assigned. 1. Functions in a professional manner as the Surgical Technologist Operating Room on a wide variety and in all stages of surgical procedures., 2. Maintains strict aseptic technique during set-up, patient draping and during surgical procedure., 3. Scrubs on surgical cases, participates in surgery by organizing the instrumentation to the surgeon, participating in surgical counts., 4. Selects and prepares the appropriate instruments, supplies and equipment for surgical cases., 5. Performs related activities under the direction of the surgeon., 6. Performs all counts with the circulating nurse according to Operating Room policy., 7. Manages all intraoperative medications in accordance with Operating Room policy., 8. Manages surgical specimens according to Physician’s orders and Hospital policy., 9. Follows Operating Room procedures for the proper decontamination of instrumentation, equipment, and room turnover., 10. Assists in the positioning, moving and transporting of patients as needed., 11. Reports equipment and supply problems to the Charge Nurse, Service Lead or Clinical Nursing Director as needed., 12. When not participating on surgical cases, assists with positioning obtaining needed items during surgery and assists in room turnover activities., 13. Participates in Operating Room activities related to quality improvement, continuing education, orientation of new personnel and emergency preparedness., 14. Remains knowledgeable about service specific equipment ensuring safe and efficient utilization., 15. Maintains a collaborative work relationship with peers and colleagues in order to create a positive work environment., 16. Performs the role of Preceptor for staff in training., 17. Assists in orientation of new personnel (i.e. aides, orderlies, technicians, nurses, etc.) to the protocols, policies, rules and regulations of the Operating Suite., 18. Remains knowledgeable about equipment ensuring safe and efficient utilization across multiple surgical specialties. Physical Requirements: 1. Ability to work within the semi-restricted and restricted environment of the Operating Room and other Perioperative support areas., 2. Stands under hot surgical lights for prolonged periods of time., 3. Possibility of muscle strain from lifting patients and heavy equipment, shocks and burns from cautery units and autoclaves. Possibility of cuts from sharp instruments., 4. Frequent exposure to hazardous chemicals, blood and bodily fluids, extreme noise levels, radiation, lasers, drastic fluctuations in ambient temperature, etc., 5. Ability to wear a protective lead apron for extended periods of time and exposure to radioactivity, harmful anesthesia gases and septic infections., 6. Requires frequent lifting and positioning of patients, materials, equipment, power tools, instruments, etc., 7. Frequent contacts with patients, physicians and nursing staff in Operating Room. Skills & Abilities: 1. Advanced knowledge of aseptic technique and infection prevention practices., 2. Intermediate knowledge of anatomy and physiology, medical terminology, microbiology, and pharmacology to ensure that optimal patient care is provided., 3. Intermediate knowledge of computers, surgical equipment, and infrastructure., 4. Intermediate knowledge and skills necessary to provide care to patients throughout the life span., 5. Excellent interpersonal skills to effectively interact with staff, patients, physicians, vendors, and other departments within the hospital., 6. Demonstrates advanced knowledge in all procedures related to their surgical specialty area and has sufficient general knowledge to assist in other specialties as needed., 7. Displays proficient knowledge and skills related to procedures performed outside of their surgical specialty area and demonstrates the ability to competently support multiple service lines and case types within the Operating Room. Tufts Medicine is a leading integrated health system bringing together the best of academic and community healthcare to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, MelroseWakefield Hospital, Lawrence Memorial Hospital of Medford, Care at Home - an expansive home care network, and large integrated physician network. We are an equal opportunity employer and value diversity and inclusion at Tufts Medicine. Tufts Medicine does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, genetic information, veteran status, national origin, gender identity and/or expression, marital status or any other characteristic protected by federal, state or local law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation by emailing us at ___.

Melrose/Wakefield Hospital, part of Tufts Medicine, is seeking experienced Surgical Technologists to join our team. This is a great opportunity to work close to home and avoid commuting traffic at a community hospital with a great culture! This role is eligible for a generous sign on bonus as well! Why Join Us? Competitive salaries & benefits Medical, Dental and Vision benefits start day one 403(b) Retirement with company match Tuition Reimbursement Free on-site Parking Opportunities for career growth Job Overview The Surgical Technician, under the guidance of the Registered Nurse, is responsible for the care and safety of surgical patients. This role is responsible for assisting the physician with the preparation of and the technical aspects of the role of the scrub person during surgical procedures. Location: Melrose/Wakefield Hospital - 585 Lebanon Street - Melrose, MA Hours: (3) 12 hour shifts - days/evenings Minimum Qualifications 1. High school diploma or equivalent., 2. Graduate of an accredited Surgical Technology Program OR Massachusetts's Licensed Practical Nurse (LPN)., 3. Surgical Technician certification through an accredited program or within 12 months of completing program., 4. Basic Life Support (BLS) certification., 5. Two (2) years of Operating Room Experience. Duties and Responsibilities The duties and responsibilities listed below are intended to describe the general nature of work and are not intended to be an all-inclusive list. Other duties and responsibilities may be assigned. 1. Assists in the set-up for specific surgical procedures in accordance with established Surgical Services procedures and individual physician preferences. Responsible for updating physician preference cards., 2. Sets up individual case carts with appropriate instruments and equipment for next day cases. Makes Clinical Practice Leader aware of any problems., 3. Performs the role of the scrub person during surgical procedures: understands and applies the fundamentals of aseptic technique by maintaining the sterile field, anticipates the surgeon’s needs, passes instruments, knowledge of anatomy, follows proper medication administration, maintains accurate accounts of sponges, sharps, and instruments in conjunction with RN and physicians., 4. Carries out technical tasks other than cutting, clamping and suturing of tissues., 5. Applies electrocautery to clamps, not tissue, on bleeders under the supervision of the surgeon., 6. Assists the RN/Transporter in transferring the patient to designated room, Prepares surgical specimens for circulating nurse to identify and label for clinical laboratory., 7. May assist anesthesiologist and other personnel in setting up equipment and obtaining emergency or other supplies. About Melrose/Wakefield Hospital Melrose/Wakefield Hospital and Lawrence Memorial Hospital of Medford are two campuses with one community in mind: the people of north suburban Boston. Melrose/Wakefield Hospital and Lawrence Memorial Hospital are distinguished by the range of high-quality clinical care and services. Our teams welcome everyone with hospitality and humanity. We focus on reducing health disparities through 40+ local health programs across a system of hospitals, urgent care locations, outpatient services, and community physicians. Core to our values, Melrose/Wakefield Hospital’s commitment to community is demonstrated by our many local health programs throughout our service area and participation in partnerships with community agencies and events, and education programs in more than 10 communities to support the wellness and health of our residents. Tufts Medicine is a leading integrated health system bringing together the best of academic and community healthcare to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, MelroseWakefield Hospital, Lawrence Memorial Hospital of Medford, Care at Home - an expansive home care network, and large integrated physician network. We are an equal opportunity employer and value diversity and inclusion at Tufts Medicine. Tufts Medicine does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, genetic information, veteran status, national origin, gender identity and/or expression, marital status or any other characteristic protected by federal, state or local law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation by emailing us at ___.

Job Profile Summary This role focuses on providing medical and clinical support services to patients. In addition, this role focuses on performing the following Surgical Services duties: Responsible for medical services involving the excision or incision of a patient's body, such as interventional pain management and other procedures. This position also works to provide a safe environment for patients undergoing invasive procedures or surgery. A clinical technologist role that has specialized knowledge or skills gained through a combination of vocational education, training, and experience. This role will be most commonly applied to patient care and/or scientific/laboratory jobs. An entry-level role typically requiring little to no prior knowledge or experience and requiring vocational or technical education. Work is routine or follows standard procedures, is closely supervised, and communicates information that requires little explanation or interpretation. Job Overview This position is an entry level Surgical Technician position who practices under the supervision of the surgical team in the Operating Room to deliver patient care throughout the perioperative experience. Assists the Surgeon during surgery by providing the appropriate instruments and in maintaining and organizing operating room equipment. Performs according to the policies, procedures, philosophy, and objectives of the department and hospital. Works cooperatively within department and other services to create a system of quality health care. Job Description Minimum Qualifications: 1. High school diploma or equivalent., 2. Before July 1, 2013, employed as a surgical technologist in a surgical facility; OR Successfully completed a training program for surgical technology in the military; OR Graduated from an accredited Surgical Tech Program., 3. If employed as a Surgical Technologist after July 1, 2013, Surgical Technologist Certification (CST) is required., 4. Basic Life Support (BLS) Certification. Duties and Responsibilities: The duties and responsibilities listed below are intended to describe the general nature of work and are not intended to be an all-inclusive list. Other duties and responsibilities may be assigned. 1. Functions in a professional manner as the Surgical Technologist Operating Room on a wide variety and in all stages of surgical procedures., 2. Maintains strict aseptic technique during set-up, patient draping and during surgical procedure., 3. Scrubs on surgical cases, participates in surgery by organizing the instrumentation to the surgeon, participating in surgical counts., 4. Selects and prepares the appropriate instruments, supplies and equipment for surgical cases., 5. Performs related activities under the direction of the surgeon., 6. Performs all counts with the circulating nurse according to Operating Room policy., 7. Manages all intraoperative medications in accordance with Operating Room policy., 8. Manages surgical specimens according to Physician’s orders and Hospital policy., 9. Follows Operating Room procedures for the proper decontamination of instrumentation, equipment, and room turnover., 10. Assists in the positioning, moving and transporting of patients as needed., 11. Reports equipment and supply problems to the Charge Nurse, Service Lead or Clinical Nursing Director as needed., 12. When not participating on surgical cases, assists with positioning obtaining needed items during surgery and assists in room turnover activities., 13. Participates in Operating Room activities related to quality improvement, continuing education, orientation of new personnel and emergency preparedness., 14. Remains knowledgeable about service specific equipment ensuring safe and efficient utilization., 15. Maintains a collaborative work relationship with peers and colleagues in order to create a positive work environment. Physical Requirements: 1. Ability to work within the semi-restricted and restricted environment of the Operating Room and other Perioperative support areas., 2. Stands under hot surgical lights for prolonged periods of time., 3. Possibility of muscle strain from lifting patients and heavy equipment, shocks and burns from cautery units and autoclaves. Possibility of cuts from sharp instruments., 4. Frequent exposure to hazardous chemicals, blood and bodily fluids, extreme noise levels, radiation, lasers, drastic fluctuations in ambient temperature, etc., 5. Ability to wear a protective lead apron for extended periods of time and exposure to radioactivity, harmful anesthesia gases and septic infections., 6. Requires frequent lifting and positioning of patients, materials, equipment, power tools, instruments, etc., 7. Frequent contacts with patients, physicians and nursing staff in Operating Room. Skills & Abilities: 1. Advanced knowledge of aseptic technique and infection prevention practices., 2. Basic knowledge of anatomy and physiology, medical terminology, microbiology, and pharmacology to ensure that optimal patient care is provided., 3. Basic knowledge of computers, surgical equipment, and infrastructure., 4. Basic knowledge and skills necessary to provide care to patients throughout the life span., 5. Excellent interpersonal skills to effectively interact with staff, patients, physicians, vendors, and other departments within the hospital., 6. Demonstrates essential knowledge in all procedures related to their surgical specialty area and has sufficient general knowledge to assist in other specialties as needed. Tufts Medicine is a leading integrated health system bringing together the best of academic and community healthcare to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, MelroseWakefield Hospital, Lawrence Memorial Hospital of Medford, Care at Home - an expansive home care network, and large integrated physician network. We are an equal opportunity employer and value diversity and inclusion at Tufts Medicine. Tufts Medicine does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, genetic information, veteran status, national origin, gender identity and/or expression, marital status or any other characteristic protected by federal, state or local law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation by emailing us at ___.

Job Profile Summary This role focuses on providing medical and clinical support services to patients. In addition, this role focuses on performing the following Surgical Services duties: Responsible for medical services involving the excision or incision of a patient's body, such as interventional pain management and other procedures. This position also works to provide a safe environment for patients undergoing invasive procedures or surgery. A clinical technologist role that has specialized knowledge or skills gained through a combination of vocational education, training, and experience. This role will be most commonly applied to patient care and/or scientific/laboratory jobs. An experienced level role requiring basic knowledge of job procedures and tools obtained through work experience and requiring vocational or technical education. Works under moderate supervision, works through problems of a routine nature, but may at times require interpretation or deviation from standard procedures and communicates information that requires some explanation or interpretation. Job Overview This position is a proficient Surgical Technician who practices under the supervision of the surgical team in the Operating Room to deliver patient care throughout the perioperative experience. Assists the Surgeon during surgery by providing the appropriate instruments and in maintaining and organizing operating room equipment. Performs according to the policies, procedures, philosophy, and objectives of the department and hospital. Works cooperatively within department and other services to create a system of quality health care. Job Description Minimum Qualifications: 1. High school diploma or equivalent., 2. Before July 1, 2013, employed as a surgical technologist in a surgical facility; OR Successfully completed a training program for surgical technology in the military; OR Graduated from an accredited Surgical Tech Program., 3. If employed as a Surgical Technologist after July 1, 2013, Surgical Technologist Certification (CST) is required., 4. 12 Months to Less than 3 Years of healthcare experience., 5. Basic Life Support (BLS) Certification. Duties and Responsibilities: The duties and responsibilities listed below are intended to describe the general nature of work and are not intended to be an all-inclusive list. Other duties and responsibilities may be assigned. 1. Functions in a professional manner as the Surgical Technologist Operating Room on a wide variety and in all stages of surgical procedures., 2. Maintains strict aseptic technique during set-up, patient draping and during surgical procedure., 3. Scrubs on surgical cases, participates in surgery by organizing the instrumentation to the surgeon, participating in surgical counts., 4. Selects and prepares the appropriate instruments, supplies and equipment for surgical cases., 5. Performs related activities under the direction of the surgeon., 6. Performs all counts with the circulating nurse according to Operating Room policy., 7. Manages all intraoperative medications in accordance with Operating Room policy., 8. Manages surgical specimens according to Physician’s orders and Hospital policy., 9. Follows Operating Room procedures for the proper decontamination of instrumentation, equipment, and room turnover., 10. Assists in the positioning, moving and transporting of patients as needed., 11. Reports equipment and supply problems to the Charge Nurse, Service Lead or Clinical Nursing Director as needed., 12. When not participating on surgical cases, assists with positioning obtaining needed items during surgery and assists in room turnover activities., 13. Participates in Operating Room activities related to quality improvement, continuing education, orientation of new personnel and emergency preparedness., 14. Remains knowledgeable about service specific equipment ensuring safe and efficient utilization., 15. Maintains a collaborative work relationship with peers and colleagues in order to create a positive work environment., 16. Performs the role of Preceptor for staff in training., 17. Assists in orientation of new personnel (i.e. aides, orderlies, technicians, nurses, etc.) to the protocols, policies, rules and regulations of the Operating Suite., 18. Remains knowledgeable about equipment ensuring safe and efficient utilization across multiple surgical specialties. Physical Requirements: 1. Ability to work within the semi-restricted and restricted environment of the Operating Room and other Perioperative support areas., 2. Stands under hot surgical lights for prolonged periods of time., 3. Possibility of muscle strain from lifting patients and heavy equipment, shocks and burns from cautery units and autoclaves. Possibility of cuts from sharp instruments., 4. Frequent exposure to hazardous chemicals, blood and bodily fluids, extreme noise levels, radiation, lasers, drastic fluctuations in ambient temperature, etc., 5. Ability to wear a protective lead apron for extended periods of time and exposure to radioactivity, harmful anesthesia gases and septic infections., 6. Requires frequent lifting and positioning of patients, materials, equipment, power tools, instruments, etc., 7. Frequent contacts with patients, physicians and nursing staff in Operating Room. Skills & Abilities: 1. Advanced knowledge of aseptic technique and infection prevention practices., 2. Intermediate knowledge of anatomy and physiology, medical terminology, microbiology, and pharmacology to ensure that optimal patient care is provided., 3. Intermediate knowledge of computers, surgical equipment, and infrastructure., 4. Intermediate knowledge and skills necessary to provide care to patients throughout the life span., 5. Excellent interpersonal skills to effectively interact with staff, patients, physicians, vendors, and other departments within the hospital., 6. Demonstrates advanced knowledge in all procedures related to their surgical specialty area and has sufficient general knowledge to assist in other specialties as needed., 7. Displays proficient knowledge and skills related to procedures performed outside of their surgical specialty area and demonstrates the ability to competently support multiple service lines and case types within the Operating Room. Tufts Medicine is a leading integrated health system bringing together the best of academic and community healthcare to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, MelroseWakefield Hospital, Lawrence Memorial Hospital of Medford, Care at Home - an expansive home care network, and large integrated physician network. We are an equal opportunity employer and value diversity and inclusion at Tufts Medicine. Tufts Medicine does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, genetic information, veteran status, national origin, gender identity and/or expression, marital status or any other characteristic protected by federal, state or local law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation by emailing us at ___.

Melrose/Wakefield Hospital, part of Tufts Medicine, is seeking an experienced full-time Surgical Technologist - SIEU to join our team. This is a great opportunity to work close to home and avoid commuting traffic at a community hospital with a great culture! This role is eligible for a generous sign on bonus for experienced candidates! Why Join Us? Competitive salaries & benefits Medical, Dental and Vision benefits start day one 403(b) Retirement with company match Tuition Reimbursement Free on-site Parking Opportunities for career growth Job Overview The Surgical Technician, under the guidance of the Registered Nurse, is responsible for the care and safety of surgical patients. This role is responsible for assisting the physician with the preparation of and the technical aspects of the role of the scrub person during surgical procedures. Location: Melrose/Wakefield Hospital - 585 Lebanon Street - Melrose, MA Hours: 36 hours per week / four-9-hour shifts (6:30am-4pm) Potential for three- 12hr shifts 6:30am-7pm On-call shifts required approx. every 6 weeks 7am-7pm Every other weekend (Saturday & Sunday) & every other holiday shift rotation required Flexibility needed for peer coverage within dept. Minimum Qualifications: 1. High school diploma or equivalent., 2. Graduate of an accredited Surgical Technology Program OR Massachusetts's Licensed Practical Nurse (LPN)., 3. Surgical Technician certification through an accredited program or within 12 months of completing program., 4. Basic Life Support (BLS) certification., 5. Two (2) years of Operating Room Experience. Preferred Qualifications: 1. Four (4) years of Operating Room Experience. Duties and Responsibilities The duties and responsibilities listed below are intended to describe the general nature of work and are not intended to be an all-inclusive list. Other duties and responsibilities may be assigned. 1. Assists in the set-up for specific surgical procedures in accordance with established Surgical Services procedures and individual physician preferences. Responsible for updating physician preference cards., 2. Sets up individual case carts with appropriate instruments and equipment for next day cases. Makes Clinical Practice Leader aware of any problems., 3. Performs the role of the scrub person during surgical procedures: understands and applies the fundamentals of aseptic technique by maintaining the sterile field, anticipates the surgeon’s needs, passes instruments, knowledge of anatomy, follows proper medication administration, maintains accurate accounts of sponges, sharps, and instruments in conjunction with RN and physicians., 4. Carries out technical tasks other than cutting, clamping and suturing of tissues., 5. Applies electrocautery to clamps, not tissue, on bleeders under the supervision of the surgeon., 6. Assists the RN/Transporter in transferring the patient to designated room, Prepares surgical specimens for circulating nurse to identify and label for clinical laboratory., 7. May assist anesthesiologist and other personnel in setting up equipment and obtaining emergency or other supplies. About Melrose/Wakefield Hospital Melrose/Wakefield Hospital and Lawrence Memorial Hospital of Medford are two campuses with one community in mind: the people of north suburban Boston. Melrose/Wakefield Hospital and Lawrence Memorial Hospital are distinguished by the range of high-quality clinical care and services. Our teams welcome everyone with hospitality and humanity. We focus on reducing health disparities through 40+ local health programs across a system of hospitals, urgent care locations, outpatient services, and community physicians. Core to our values, Melrose/Wakefield Hospital’s commitment to community is demonstrated by our many local health programs throughout our service area and participation in partnerships with community agencies and events, and education programs in more than 10 communities to support the wellness and health of our residents. Tufts Medicine is a leading integrated health system bringing together the best of academic and community healthcare to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, MelroseWakefield Hospital, Lawrence Memorial Hospital of Medford, Care at Home - an expansive home care network, and large integrated physician network. We are an equal opportunity employer and value diversity and inclusion at Tufts Medicine. Tufts Medicine does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, genetic information, veteran status, national origin, gender identity and/or expression, marital status or any other characteristic protected by federal, state or local law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation by emailing us at ___.

Job Description Now Hiring | Medical Assistant/Front Office Assistant for a Long-Term Role with a Premier Hair Restoration Practice in Boston, MA Hourly range: $20 to $21per hour Do you want to work in an exciting, growing industry? The aesthetic medicine industry continues to expand, as more and more people are seeking ways to improve their appearance and confidence Bosley, the world's largest internationally known aesthetic medicine practice is offering an outstanding opportunity for the right candidate. With 70 offices across the nation and nearly 50 years of experience, we can offer you an exceptional work environment. Bosley is the leading hair restoration expert and has been changing our patients’ lives for nearly 5 decades using the latest, most advanced technology for both surgical and non-surgical hair restoration. Bosley’s corporate culture is filled with passionate team members that enjoy helping people and love what we do. If you want a rewarding career in the fast-growing aesthetics industry, then Bosley is the right place for you! Bosley is seeking a top-notch Medical Assistant/Front Office Assistant to support our Boston, MA surgical office. As a Medical Assistant/Front Office Assistant, you will play a key role in enhancing the patient experience from start to finish. This dynamic position requires strong attention to detail and the ability to manage multiple tasks simultaneously. In the morning, you'll begin by working in the front office, helping open the clinic, greeting patients—including those scheduled for procedures—reviewing paperwork, and processing payments. After lunch, you’ll transition to the clinic, where you’ll provide hands-on care, work alongside the team and physician, offer post-procedure instructions, and assist patients throughout their procedure experience. At our practice, we value unparalleled personalized patient experience, and technical expertise to give our patients the best possible results. If these values resonate with you and you are a patient-focused individual, you are the addition we are looking for. Summary: • Greet patients and visitors in person and on the telephone., • Schedule patients for procedures, consultations, and post-operative visits., • Process payments for procedures & products., • Ensure accurate patient data is input into the computer systems., • Accompany patient to exam/procedure room, • Prepare patients for examination and treatment, • Check the schedule and organize the patient flow, • Prepare exam and treatment rooms with necessary instruments and supplies, • Ensure that all treatment rooms are cleaned and stocked at the end of the workday, • Assist providers in preparing the patient and the facilities for procedures, • Prepare and maintain supplies and equipment for treatments, including equipment sterilization, • Assist with scheduling of patient's tests and treatments, • Communication Skills: Strong interpersonal and communication skills. Ability to effectively communicate with patients, peers, and management. Ability to communicate with proper etiquette., • Mathematical Skills: Basic math functions. Ability to use a calculator and calculate percentages., • Education/ Experience: Certified medical assistant. Willing to train the right candidate. Get paid while learning to become a hair transplant technician from the best team in the business., • Reasoning Ability: Ability to multi-task, while being attentive to patients and remaining flexible to the needs of the business. Ability to work as part of a team and take initiative independent of direct supervision., • Organizational Skills: Ability to follow up on leads, schedule consultations, obtain patient consent for treatment and manage time management skills. We offer very competitive compensation, benefits, and an inclusive culture. • Medical, Dental, Vision, Life Insurance, LTD, 401k match, and a $250/mo., PTO, transit pass where applicable.

Job Description Jefferson Apartment Group is a full-service real estate firm specializing in multifamily and mixed-use real estate investments through our acquisition, development, construction and property management services. We are seeking a Maintenance Technician for J Malden Center, a unique transit-oriented, mixed-use development that includes 320 residential apartments, 45,000 sf of office space that will become the new Malden City Hall, and more than 22,500 sf of street retail. jmaldencenter.com In the Maintenance Technician role, the primary objective is to provide superior care and customer service to our most valued residents by providing quality, timely and right the first-time responses to residents’ service needs. ESSENTIAL FUNCTIONS: • Replaces filters and cleans air conditioning vents in vacant apartments and occupied units, in addition to other preventative maintenance tasks., • Assists maintenance staff with service requests., • Handles “on call” duties whenever needed., • Replaces breezeway/hallway light bulbs as needed., • Assists with apartment make-readies., • Assists in the distribution of flyers and other material., • A High School Diploma or equivalent preferred. We offer a competitive salary and excellent individual and team performance-based bonus potential. In addition, a comprehensive benefits package is offered to all full-time employees with medical, dental, and vision coverage, paid vacation and sick leave and rental discounts. Join a growing company with tremendous career growth opportunities. EEO MFDV.

Job Description BigFoot Staffing is seeking a Cleanroom & Equipment Certification Technician to join a growing engineering services team. This role focuses on ensuring that client facilities and equipment meet regulatory requirements and operate according to design and owner specifications. Youll perform inspections, certifications, and functional testing for various building systems and controlled environments within pharmaceutical and related industries. Key Responsibilities • Perform testing, certification, and maintenance of clean air hoods (biological safety cabinets, laminar flow hoods, fume hoods, etc.), including NSF-certified procedures., • Conduct testing and certification of laboratory spaces and cleanrooms., • Inspect and functionally test building systems, including Air, Cooling, Heating, Plumbing, and Power Distribution., • Accurately complete all required documentation and administrative tasks. Qualifications Required: • Technical degree (2- or 4-year) OR equivalent education, training, and related experience, • NSF certification (or ability to obtain), • Ability to read and interpret engineering drawings, • Strong mechanical aptitude with proficiency using hand tools, • Proficiency with Microsoft Office, • Ability to understand and apply technical data, • Problem-solving skills and willingness to continually learn new services, • Valid drivers license and reliable vehicle (truck, hatchback, or minivan), • Ability to lift up to 25 lbs, • Willingness to travel locally with some overnight trips (up to 1 week at a time) Preferred: • Experience in a cleanroom environment Additional Information • Mileage and parking expenses reimbursed, • Occasional travel to the Pacific Northwest for training or client service opportunities, • Must pass an initial background check If you'd like to learn more about this opportunity - apply today! By applying for this job, you consent to being contacted by BigFoot Staffing representatives about job opportunities via text messaging. Standard messaging rates may apply. You may opt-out at any time by replying 'STOP' to any message received. #INDHP #OUHP

Job DescriptionBenefits: • Competitive salary, • Opportunity for advancement, • Serve others within your community in their time of need, • Make a difference for others that have had a disaster strike their property, • Work hard and take pride in completing projects (i.e. mitigating flood and fire damage), • Be empathetic and show a sense of urgency while communicating through modern technologyTeam Compensation and Benefits:, • Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities, • Monthly cross-training opportunities to advance your career, • Bonus program for performance, • Great culture and team dynamicTeam Qualifications (Requirements):, • Desire to join a world-class team and contribute a positive attitude, • Dedication to customer service, • Fluent in English, • Valid driver's license with a clean record, • Have the ability to work nights/weekends and overtime, if needed, • Ability to lift 75 LBS frequently, • Desire to continually learn new thingsRole on the Team (Job Responsibilities):, • High level performance of water mitigation, tarping, board up, mold remediation, asbestos/lead abatement and carpet cleaning/reinstallation services according to Paul Davis and industry specifications under the supervision of the Mitigation Manager., • Focus and dedication to providing excellent customer service., • Maintain a clean, properly stocked and organized truck and maintain all company equipment., • Be accessible by phone and participate, as necessary, in the on-call schedule.

Job DescriptionField Service Controls Technician Job Description We are looking for a full time traveling Field Service Controls Technician with experience in product installation to help take our company to the next level. As a small-medium sized business in the emerging energy efficiency and renewable energy space, our goal is to grow sales and become a national leader. Our national network of engineers and technicians is unique in this field and provides a solid platform for future growth. The ideal candidate will be able to demonstrate exceptional communication and integrity while maintaining a high level of service excellence. Field Service Controls Technician Essential Duties and Responsibilities: • Install and/or commission control systems for commercial kitchen ventilation., • Install low 230+ volt and electrical equipment, • Perform site surveys of commercial kitchen ventilation hoods and mechanical systems., • Perform site meetings to coordinate various trades for product installation., • Deliver formal site training to end‐users (kitchen staff and site engineers)., • Write technical reports at project completion for submission to customer., • Provide technical support to customers and contractors to resolve issues rapidly and thoroughly., • Make recommendations for potential service enhancements or modifications to meet the ever-changing needs of the customer., • Manage all travel arrangements once jobs are assigned each week, including and changes that may occur while on the road., • Submit weekly expense reports., • Participate in weekly safety meetings., • 100%+ travel required (regional, national, or international), • Other job duties as assigned.Field Service Controls Technician Qualifications:, • Proficient in Microsoft Office Suite, • Mechanical, electrical, and controls knowledge required, • Superior customer service skills, • Excellent written and verbal communication skills, • High emotional intelligence, positive attitude, and a service leadership philosophy, • High attention to detail, follow-up, multi-tasking, and conflict resolution, • Able to demonstrate a high level of integrity and a penchant for high quality, • Must possess a strong work ethic and a high level of self-accountability, • Able to establish and maintain effective working relationships with co-workers, contractors, and customers, • OSHA 10- or 30-Hour training preferred, • CPR/AED/First Aid certification preferred, • Requires ability to walk, climb, stand, carry materials, stoop, kneel, bend at waist., • Must be able to climb a minimum 30 ft ladder, • Maximum unassisted lift = 70 lbs. Average lift less than 50 lbs., • Exposed to seasonal weather based on geographic region, • Exposed to moving parts and electricity that require safety protocols, • Extreme Ownership - Takes personal responsibility for outcomes and perseveres in the face resistance or setbacks. Pursues everything with energy and drive., • Subject Matter Expertise - Excels at his/her professional function, regularly demonstrating and sharing depth of knowledge and skills. Is a quick study., • Clear & Candid Communication - Ensures that information is passed on to others who should be kept informed; has the courage to say what needs to be said., • Building Collaborative Relationships- Cultivates trusting, respectful, professional relationships with colleagues and customers over time., • Planning & Problem-Solving - Takes the steps necessary to deliver high quality results, on time and on budget., • Continuous Improvement - Constantly seeks ways to improve the internal and external customer experience by delivering better, faster, or less expensive products and services. Melink Corporation is an Equal Opportunity Employer #IHFieldServiceTech Powered by JazzHR Ws9PFqWZjq

Job Description Cooperidge Consulting Firm is seeking a dedicated Service Technician to join the team of one of our Industrial Services Clients. In this role, you will be responsible for performing advanced diagnostics, service, and repairs on equipment, providing exceptional support to our customers, and ensuring optimal performance of authorized products. Key Responsibilities: • Perform advanced repairs and maintenance on equipment., • Conduct diagnostic tests to analyze service issues in a timely manner., • Document all service and repair activities accurately in the work order system., • Collaborate with other technicians and service personnel to improve processes., • Provide training and mentorship to more junior technicians., • Support the service department by maintaining inventory and supplies., • Communicate effectively with customers regarding services performed and equipment needs., • At least 5 years of HVAC/R service experience (hot side preferred but cold side accepted), • High school diploma or GED required; HVAC certificate or Universal Refrigeration Certification preferred for higher-level technicians., • Proficient in Microsoft Office; familiarity with MRP or rental software is a plus., • Must pass a DOT physical and drug test to operate company vehicles., • Valid driver’s license with a clean motor vehicle report (MVR) required., • Willingness to undergo a background check prior to employment., • Ability to safely lift and move up to 50 pounds., • Strong mechanical knowledge, effective communication skills, and customer service focus., • Eagerness to learn and grow within the company., • Full-time roles offering overtime and weekend work opportunities, • Competitive hourly wages plus potential quarterly bonuses, • Comprehensive health, vision, and dental insurance plans, • Life insurance coverage, • 401(k) retirement plan with company matching contributions, • Paid time off including vacation, sick leave, and holidays, • Opportunities for career growth and advancement, • Employee discount programs and perks

Job Description The Building Technician works under the direction of the Property Manager(s), who oversee the daily operations of multiple office buildings. Duties include preventative maintenance, meter readings, troubleshooting and correcting problems, performing inspections, responding to tenant issues and requests, occasionally being available after hours for emergencies, overseeing contractors working in the building, and some painting. The Building Technician must be knowledgeable about life safety equipment, power plant operations, electrical systems, and all building HVAC systems. ESSENTIAL DUTIES: • Preventative Maintenance including HVAC, electrical and plumbing systems, • Meter Readings, • Troubleshooting and correcting problems, • Perform inspections, • Respond to tenant problems and requests, • Off-hour emergency availability as needed, • Meet and oversee contractors working in the building, • Previous experience in building maintenance or a related field required, • Knowledge of building HVAC, electrical, and plumbing required, • Professional demeanor and excellent customer service skills necessary, • Excellent communication skills, • Good mechanical skills and must be a quick learner, • Excellent customer service skills, • Ability to prioritize tasks, • Must have good organizational skills

Job DescriptionDescription: Under the guidance of the Director of Nursing, the Infection Prevention and Occupational Health Nurse Manager is responsible for the management of the Sterile Processing and Occupational Health departments, as well as facilitating and coordinating activities for the Infection Prevention and Control (IPC) program and supporting the education and development of staff. The Infection Prevention and Occupational Health Nurse Manager has oversight for the Nurse and Sterilization Technician, as well as practice as a nurse in completing the day-to-day duties. The position is expected to perform under minimal direction and keeps the Director of Nursing informed of progress and potential issues that may affect Occupational Health, SPD or Infection Control. The Infection Prevention and Occupational Health Nurse Manager will implement Evidence Based Practice changes through policy and education to ensure compliance with regulatory bodies. The Infection Prevention and Occupational Health Nurse Manager will include Fenway Health’s Racial Equity Action Plan (REAP) principles as well as the Building the Best Workplace Culture pillars in all their activities. Fenway Health offers fantastic benefits to those who quality including: • Generous paid time off including 3+ weeks of vacation, 9 sick days, and 11 paid holidays per year, • Comprehensive and low-cost health and dental (100% employer contribution) insurance through Blue Cross Blue Shield., • Retirement plan with employer match, • License fee reimbursement, • Educational opportunities through The National LGBTQIA+ Health Education Center, • CEU training opportunities, • Supervision, tuition reimbursement, in-service training, and professional development support Occupational Health • Management of occupational health staff, • Support Human Resources department with clinical clearance for new hires, • Support Human Resources department for clinical clearance for staff return to work procedures post illness and injuries., • Monitors employee work-related illness and injury trends and incident reports and works to assess, develop and implement strategies to prevent future work-acquired injuries or illness, • Coordinate and support administration of vaccinations, Tuberculosis screening/testing and FIT testing requirements for new hires and staff annual renewal requirements., • Ensures compliance with annual reporting to DPH of staff vaccination data, • Supports surveillance activities related to workplace exposures of communicable diseases, • Provide guidance and support to Human Resources department for staff injuries on the job, • Support Occupational post exposure prophylaxis (OPEP) process, • Support Human Resources department regarding request for environmental work accommodations, DME equipment etc., • Support nursing department clinical needs/ duties as assigned Infection Prevention/ Control and Sterile Processing • Management of Sterile Processing Department technicians, • Monitors compliance with the performance and proper documentation, including the QC process of Sterilization and High Level Disinfection practices in accordance with the associated policy and procedures. Conducts the required training and completes competency checklists for health center employees designated to perform these functions upon hire and annually thereafter, • Maintains appropriate metrics to track SPD performance and efficiency, • Collaborate with multidisciplinary departments and programs, senior leadership, and external agencies to implement, monitor, and adhere to the IPC program., • Ensure prevention measures are in place in patient care areas and conduct rounds on a regular basis to review and assess IPC practices and identify opportunities for improvement regarding IPC strategies including, but not limited to environment of care; hand and respiratory hygiene; hazardous waste disposal; cleaning, disinfection, and sterilization practices; and specimen collection, handling, and transportation., • Facilitate adherence with regulatory requirements and accreditation standards related to IPC surveillance and reporting in accordance with Joint Commission, DPH, OSHA and CDC, • Implement recommended or evidence-based practices aimed at prevention of infections acquired in the healthcare settings and other communicable infectious diseases encountered in the healthcare setting., • Assess infection risks of design, construction, and renovation that impact patient care areas and provide recommendations to reduce the risk of infection as part of the design, construction, and renovation process to existing sites., • Advise healthcare personnel regarding the use of personal protective equipment (PPE) and application of appropriate precautions., • Collaborate with area supervisors to develop competencies and provide education regarding the principles and techniques of infection control to personnel as appropriate (e.g.: orientation, new product or equipment implementation, updated policies and processes)., • Facilitate development and implementation of policies, procedures, and guidelines related to IPC in consultation with the Infectious Disease physician and nursing., • Provide input into selection and implementation of products and equipment intended for clinical use and for infection surveillance and control use, • Serves as chair of the IC committee and responsible for leading the annual IC Risk Assessment, Plan and Goals, in collaboration with the committee., • Serves as a member of the Environment of Care Committee, • Serve as an active participant at other meetings appropriate for IPC including antibiotic stewardship, pharmacy and therapeutics, emergency preparedness, and safety. Collaborate in planning community and facility responses to communicable disease outbreaks, biologic threats and disasters as appropriate. Education and Development Program Collaboration • Responsible for the management of the Staff Development Nurse, • Provides guidance, resources, and knowledge regarding the most up to date clinical and infection control practices, • Participates in strategic planning as assigned, • Demonstrates skill in navigating and communicating in a complex environment., • Works with department leaders to identify areas of improvement and training for staff, • Accepts committee and workgroup appointments and actively participates to affect change., • Engages with and promotes respectful communication between interdisciplinary teams., • Maintains proficiency in clinical areas and serves as a resource for staff, • Participates in planning, implementing, and monitoring Infection Prevention/ Control goals and objectives consistent with the Fenway Health Strategic Plan, • Lead, facilitate and participate on IPC related improvement initiatives., • Works alongside clinical nurses as needed to support patient care Requirements: • Current Massachusetts Nursing license required (LPN or RN), • Minimum 3 years of nursing experience, • Experience in infection control and/or APIC certification, • Experience in Occupational Health, • Current BLS certification required., • Proficiency in the use of the computer and associated software (i.e., MS products, Electronic Health Record (EHR) software) is required., • Effective interpersonal and communication skills and ability to work harmoniously with others in an ethnically, culturally, and racially diverse environment is required., • Authentic interest in LGBTQIA+ and community health is required., • Ability to work harmoniously and effectively with colleagues, patients, clients and vendors across the spectrum of diversity, including but not limited to race, ethnicity, color, gender identity, sexual orientation, age, socio-economic status, national origin and immigrant status, religious or spiritual identity, disability (physical, mental, emotional and developmental), veteran status, and/or limited English proficiency., • Five (5) years of experience in ambulatory, hospital, or public health nursing, • Experience with working within a complex healthcare system with multiple product lines We offer competitive salaries, and for those who qualify, an excellent benefits package; including comprehensive medical and dental insurance plans, generous paid time off, commuter benefits, and more. LGBTQIA+ identified persons, Black, Indigenous, and other people of color (BIPOC), and individuals from other historically underrepresented communities are strongly encouraged to apply.

Job Description Mavis Tires & Brakes at Discount Prices - AUTOMOTIVE TIRE TECHNICIANS ($800 New Hire Bonus) Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Tire Technicians to join Team Mavis TODAY at our state-of-the-art automotive service and retail tire sales centers in the Everett, MA area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. Mavis offers eligible Automotive Tire Technicians GUARANTEED WEEKLY BONUS PAYMENTS during the introductory period of employment, totaling up to $800! WHAT IS THIS GREAT CAREER OPPORTUNITY? As an Automotive Tire Technician, you're the backbone of our business. That's why you'll realize the rewards of a career with competitive, guaranteed base compensation PLUS additional earning potential through significant weekly bonus payments. The starting base rate of pay for an Automotive Tire Technician is negotiable. • NO EXPERIENCE IS NEEDED! We'll teach you everything you need to know through PAID TRAINING. To help introduce you to our weekly performance-based incentive programs and to give us an opportunity to coach you on our industry-leading processes, Mavis offers eligible Automotive Tire Technicians GUARANTEED WEEKLY BONUS PAYMENTS during the introductory period of employment, totaling up to $800!, • Automotive Tire Technicians install new tires and wheels and perform tire services -- like rotations, balancing and flat repairs -- to keep our valued customers' vehicles operating safely. HOW DO I KNOW IF A CAREER WITH MAVIS IS RIGHT FOR ME? You'd be a great fit for the Automotive Tire Technician position if you: • like paid training and using proven processes;, • are motivated by commissions/incentive compensation;, • value reliability, punctuality and teamwork;, • love working in a fast-paced environment;, • enjoy staying active;, • are open to learning;, • care about meeting customer-promised delivery times and providing quality service;, • want to work for a growing company that promotes from within; and,, • be at least 18 years of age;, • be legally authorized to work in the United States; and, At Mavis, we understand that our people are our greatest asset. We value our team members' hard work and that's why proudly offer you benefits and rewards to support your lifestyle and well-being. As an Automotive Tire Technician, you can expect: • A safe, positive working environment;, • An excellent combination of fringe benefits, like health, vision and dental insurance;, • A 401(k) retirement savings plan with employer match;, • Paid vacations;, • Paid time off;, • Paid holidays;, • Life insurance;, • Paid on-the-job training; and,, • Opportunities for career growth and advancement What are you waiting for? APPLY NOW! Candidates can apply online at . OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit . Mavis is an Equal Opportunity Employer Consistent with our commitment to the principal of equal employment opportunity for all individuals, we enforce a zero-tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived membership in any category or status protected by applicable federal, state or local law. Where appropriate, Mavis may provide reasonable accommodation, in order for an otherwise qualified individual to perform the essential functions of the position. Mavis does not seek salary history information from applicants. Job Posted by ApplicantPro

Job Description Who We Are Evergreen Fire and Security (EFS) is a recognized leader in the life safety and security solutions industry. We are entrusted by the Federal Government and commercial customers to protect lives, critical infrastructure, and information by providing and maintaining technically advanced and innovative fire alarm, access control, intrusion detection, CCTV, mass notification, and other critical protection systems. The Key to Our Success Our success is largely due to the experience, skills, and expertise of the best and brightest employees in the industry. Due to growth, we are looking for additional qualified experts to join the Evergreen team. Think you have what it takes? Great! We welcome you to submit your qualifications for this great Evergreen Fire and Security career opportunity. The Opportunity This opportunity as a Traveling Electronic Security Systems Technician is perfect for an experienced low-voltage technician who enjoys traveling! The Responsibilities • Installs, repairs, tests, and maintains security projects, • Serves as the face of Evergreen to our customers onsite by providing top-notch service and product training, • Ensures safety through compliance with relevant State and Federal regulations, • Handles service orders and project administration, • Ability to travel extensively, • Valid CPR/First Aid card, • Valid electrician certificate or trainee card, • High school diploma or equivalent, • Electrical wiring experience, • Basic computer skills (Microsoft Office), • Good communication skills to interface with customers, • Ability to call and schedule appointments, follow instructions, and understand code requirements, • Attention to detail, • Ability to work autonomously, • Ability to work well with others and come to work with a positive attitude, • Valid driver’s license and proof of minimum liability insurance, • Relevant factory certifications and knowledge are always a plus. Great examples include:, • Lenel, • DAQ Access Control/IDS, • Milestone CCTV, • Pelco CCTV, • Monitor Dynamics Access Control/IDS, • AMAG, • Various DDC and Building Utility Control Systems, • Prior experience working on government contracts or military bases Here at Evergreen, we pay competitive wages and benefits, but we also go the extra mile for our Technicians, and even more so for those who travel frequently. Sound good? Check these out: Awesome Travel Perks! • Additional weeks of paid leave for extended travel—up to 320 additional hours of time off!, • Paid flights for weekends at home for regional travel, • Weekly per diem for meals, incidentals, and lodging paid to you, • Paid TSA Pre-Check, • Competitive pay, • Paid Time Off (PTO), • Paid holidays, • Medical, dental, and vision insurance plans, • 401(k) plan, • Up to 4% match available, • 100% vested from day one, • Healthcare flexible spending accounts, • Dependent care flexible spending accounts, • Employee Assistance Program (EAP), • Company-sponsored group term life insurance, • Corporate perks program We also offer opportunities for training and advancement in a fast-paced, inclusive, and rewarding working environment. Check us out on Facebook, LinkedIn, or at . Evergreen Fire & Security is a US government contractor with sensitive access requirements. As our employee, you must also be able to satisfy federal government requirements for access to government information. Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. citizenship due to the level of access to sensitive information and/or restricted facilities. Evergreen Fire and Security is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy, status as a parent, national origin, age, disability (physical or mental), family medical history or genetic information, political affiliation, military service, or other non-merit based factors. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, training, and career development programs. Powered by JazzHR yoHLXf7C2M

Job DescriptionDescription: ASC-Contract Biometric Technician (On-Call)- Position Position Summary: As an ON-CALL Customer Service Representative (Biometrics Technician), you will be responsible for supporting the mission of a government program located in your state. This position works as a part of a dynamic team of professionals assisting the United States Citizenship and Immigration (USCIS) Application Support Center (ASC) operations.This is not a regular Full Time or regular Part-Time position; it is a Casual On-Call position. • ON-CALL employees are expected to be available all five days, Monday through Friday from the hours of 7:45 am to 4:15 pm for substitute coverage as needed at the site., • All efforts are made to notify On-Call personnel in advance of the site on-call needs, however, occasionally employees are notified the night before or the day of need. Interested candidates must meet this availability., • In this position, hours are not guaranteed, and employees are on an “as needed” basis so a steady income stream cannot be guaranteed., • Complete biometrics registration (fingerprints, photographs, signatures) for applicants seeking legal immigration to the United States., • Verify all who enter the ASC are approved applicants and visitors while ensuring they adhere to all facility processes and procedures to maintain operational efficiency., • Provide front-line customer service as representatives of HeiTech Services, our partner Amentum and on behalf of the United States Government. Skills and Abilities Required: · Must be able to obtain and maintain a government-issued suitability clearance. · Must be able to speak and write in English. · Ability to stand upright on one’s feet for scheduled shift duration, excluding meals and breaks · Ability to hold and grasp applicants’ hands to obtain quality fingerprints · Ability to work in a high-paced environment with the public · Ability to type and use basic computer skills · Successful completion of the biometrics training and certification within 60 days Minimum Education and Experience Required: · High School Diploma or equivalent · Demonstrated experience in customer service Must be US Citizen and able to obtain a government clearance. Desired Skills: Ability to speak a foreign language

Job Description MAINTENANCE TECHNICIANOur client is seeking a full-time Maintenance Technician for one of their flagship apartment communities. The ideal candidate must be skilled in all areas of general maintenance and must be able to perform physical maintenance operations of the property. YOUR ROLE • Maintain the interior and exterior physical condition of the assigned property in a professional manner, • Assist in the performance of all maintenance duties including service requests and apartment turnover functions, • Regularly care for buildings and grounds as needed, • Reliably handle emergency situations YOUR VALUE, • Dedication to your Residents – working to exceed their expectations, resolve any maintenance-related issues, perform work orders in a timely manner, and maintain the property to the company's high standards, • Dedication to the Vision – striving to exceed expectations, always being a team player, and persisting until the job is done., • Dedication to your team – you roll up your sleeves and assist team members—no job is “above/below your pay grade” YOUR SKILLS, • Experience in property maintenance (preferably residential) including Appliance Repair, Electrical, Plumbing, HVAC, Painting, etc., • Willingness to jump in, learning new tasks and systems, • Excellent communication skills, both written and verbal THE PERKS!, • Market Competitive salary, on-call and overtime pay, bonuses and performance-based incentives., • Comprehensive health, dental, and vision insurance plans., • Professional development opportunities., • Generous vacation and leave policies.

Job DescriptionDescription: JOB TITLE: CNC FIELD SERVICE ENGINEER IMMEDIATE SUPERVISOR: SERVICE MANAGER TRAVEL: REQUIRED UP TO 100% WORK SUMMARY: Perform a wide variety of tasks associated with servicing, repairing or operation of most CNC machine tools. Use precision test equipment to analyze, troubleshoot and repair complex mechanical and electrical problems. Advanced operation of CNC controls from different manufacturers. Successfully coordinate and complete the installation of all machine tools. Work closely with customers, vendors, OEM’s, and other KRC personnel. Independently organize and complete a successful service call. Assist other service engineers, and preventive maintenance technicians. General scraping and fitting of machine tool components (not mandatory but improves your value). Troubleshoot and repair electronic circuitry to component level. Perform a variety of advanced specialized machine tool repair processes. JOB RESPONSIBILITIES: • Dismantle and prepare machines for shipment, • Level and alignment of machines., • Troubleshoot and repair of major machine tool problems., • Disassemble, repair and rebuild machine tool sub assemblies and assemblies., • Organize, tag and mark components for future assembly., • Identify, repair or replace damaged components., • First time power up and troubleshooting of machines., • Servo system tuning., • Report activities and expenses timely and accurately, • Train other employees for advancement, • Train customers on operation of CNC control systems., • Advanced troubleshooting and repair electronic circuitry., • Communicate with customers, vendors, OEM’s and KRC personnel., • Keep work area neat, clean and organized., • Travel to customer’s facilities often and on short notice, • Work with very limited supervision., • Training & Tuition Reimbursement, • Company paid Uniforms and Cell Phones, • Company truck provided for field service engineers, • Paid Vacation, Sick Time and Holidays., • Health Insurance, Vision, Life, Dental, Long & Short-Term Disability, 401k Profit Sharing, • Referral Bonus Program of $5000, • A Positive Work Environment ABOUT KRC MACHINE TOOL SOLUTIONS KRC Machine Tool Solutions is a provider of machine tools and services specializing in helping customers maximize their production requirements through unique solutions. Established in 1989, we are known nationwide as the premier provider in the areas of unique machine builds, CNC retrofitting, machine rebuilding, and machine tool services and repair. At KRC, you will have the opportunity to work alongside the most talented leaders in the Machine Tool Industry. We are looking for passionate people to join our team, who are excited to help us build the future generation of this industry. Our passion is in solving customer’s problems and creating unique solutions that no other company can provide. In order to accomplish our goal of being the best, we understand our people have to be our #1 asset and we are fully committed to investing in your success. Requirements: JOB REQUIREMENTS: • Advanced machine tool knowledge and terminology., • 3 or more years of experience in machine tool field service., • Associates degree in electronic engineering or related field of study--experience may be substituted for the education., • Complete knowledge of mechanical systems and components., • Full understanding of multiple machine tool specifications and have an advanced knowledge of test equipment., • Mechanical hand tools and tool box., • Intermediate knowledge of parametric programming and ladder logic., • Basic knowledge of hand tools and some power tools., • Set up and operate Renishaw Ballbar and Renishaw Laser Calibration equipment (desirable, not mandatory)., • Ability to do final scrape and or fitting of most machine tool components is desirable (not mandatory)., • Working knowledge of applications processes and programming., • Dependable transportation., • Excellent interpersonal skills., • Intermediate computer skills., • Advanced troubleshooting abilities., • In depth understanding of CNC controls and functions., • Standing for long periods of time., • Frequent reaching, bending, and stooping., • Ability to lift up to 50 pounds.

Job DescriptionDescription: Are you an experienced Generator Technician looking for a career with a company that values your skills and supports your growth? At Kinsley Power Systems, we’ve been a leader in generator service, sales, and rentals for over 60 years. As a family-owned business, we take pride in fostering a rewarding work environment where your expertise makes a difference. To qualify for the $25,000 sign-on bonus—candidates must reside in the Greater Boston metro area. Key Responsibilities and Preferred Experience: • Performing preventative maintenance and repairs on standby generator systems, • Troubleshooting, diagnostic testing, load-bank testing and start-ups on generators, • Preparing accurate quotes for repairs and completing/submitting work orders, • Previous experience working on residential or industrial generators, • Exceptional communication and customer service skills, • The ability to participate in an on call, rotating schedule, • Must provide your own tools (multi-meter, hand-tools, etc.), • Very safety focused with an OSHA 10 (or the ability to attain one), • Valid DOT Card (or the ability to attain one) and a valid driver’s license Benefits: • Competitive compensation and Paid Time Off (Personal, Parental Bonding, Bereavement, Volunteering), • Comprehensive health benefits (Medical, Dental, Vision, 401k + match, Company Paid STD/LTD/Life + more), • Company sponsored trainings and certifications (EGSA), • Company vehicle, gas card, • Uniforms, annual boot + additional uniform stipends, • Advancement opportunities and the ability to work alongside some of the top technicians in our industry Compensation: • Up to $25,000 sign-on bonus, paid in installments (details provided during the interview), • Compensation: $40–$60 per hour, based on experience All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements:

Job DescriptionBenefits: • Employee discounts, • Opportunity for advancement, • Training & development Automotive Technician Overview: Thank you for considering Midas to continue your career. We are in need of an experienced, career focused technician at our Torrington location. The ability to effectively and accurately diagnose and repair a wide variety of vehicles is a must. A positive attitude and your own tools are also requirements. Emissions tester or ASE certifications a plus. At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through years of automotive repair experience. We are a full-service facility, and we are looking for talented and self-motivated people to help us grow our business! Automotive Technician Benefits & Perks: • Free Training, • Paid Holidays, • ASE reimbursement., • Employer match 401K, • Health insuranceAutomotive Technician Requirements:, • Ability to repair vehicles independently, while also having experience working well in a team environment., • Knowledge in automotive brakes, exhaust, suspension, & engine diagnostics., • Track record of high personal productivity., • Knowledge of, and adherence to, safety and environmental standards for repair facilities.Automotive Technician Qualifications:, • Experience using shop equipment such as lifts, Tire Changing Equipment, Tire Balancers, Wheel Alignment Equipment, etc., • High School Diploma or equivalent. Technical Degree or ASE certifications a definite plus., • Valid Drivers License that meets insurance guidelines., • Personally owned tools required to complete jobs independently.Job Type: Full-time

Job Description Position: Facilities Support Technician Department: Facilities Services Location: Facilities Services Building and across the Milton Academy campus Hours: Generally M-F, 8:30 a.m.-5:00 p.m. FLSA: Non-Exempt (hourly) Workers Comp. Code: Milton Academy is an independent college preparatory K–12 school, boarding and day in grades 9–12, located eight miles south of Boston. Milton Academy cultivates in its students a passion for learning and a respect for others. Milton students grow by developing their own identities, learning from and listening to the lived experiences of others, and living and working among peers whose differences they accept with respect and care. In our ongoing work to create an environment that confronts bias, injustice, and bigotry, we encourage each other to be open to learning, explore our histories and identities, and seek to understand the world around us with a critical lens. At Milton, we prepare students to partner with their future communities to create a more just world, and to have the courage to speak up and live by our motto, “Dare to be true.” Summary of Position: The Facilities Support Technician is an entry-level position that plays a vital role in the day-to-day operations of Milton Academy’s facilities department and services to the campus. This position is responsible for 1) providing mailroom support, 2) assisting with moving, deliveries, and event setups across campus, 3) accompanying vendors, trades or grounds crew members to assist with various tasks, and 4) providing various forms of administrative support for facilities services. The technician helps ensure an organized, efficient, and safe environment for students, faculty, staff, and visitors. The individual must understand how to collaborate and communicate well with others, have strong organizational and computer skills, and be able to meet the physical requirements of the position. All training related to the department’s systems and basic maintenance activities will be provided; as such, the successful candidate must have an interest in acquiring new skills, attending training, and taking direction. Essential Functions and Responsibilities: Mailroom • Staff the mailroom front desk as needed; greet students, employees, and package delivery employees as they arrive., • Answer the mailroom phone and direct callers as appropriate., • Sort and distribute incoming mail and packages; scan items into the Notifi system and assign them to the appropriate individual and/or department., • Prepare and ship outgoing mail and packages., • Support delivery of mail and packages across campus, as directed., • Operate necessary mailroom equipment and computer programs to complete job responsibilities., • Maintain mailroom cleanliness and organization; inventory mailing supplies and re-order as directed., • Create signage and other informational items for the campus as directed., • Provide administrative support, as directed, including support for the Facilities Operations and Administrative Specialist, which may include:, • Distributing keys and access badges to vendors and contractors, • Monitoring the facility work order system, • Managing campus vehicle reservations and usage, • Complete general maintenance tasks (training will be provided), as directed, either alone or in support of trades maintenances staff., • Escort outside vendor technicians during on-site work to ensure proper coordination and adherence to security protocols., • Assist with setup and breakdown of furniture, equipment, and materials for meetings, events, athletic functions, and rentals., • Execute small moves and/or deliver items across different parts of campus, as directed., • Support snow removal as part of the school’s essential staff team (must be available to work onsite when school is canceled or opening on a delayed schedule due to inclement weather), including driving vehicles and equipment with snowplows, brushes, blowers, salt/sand spreaders and shovels., • Other duties as assigned, in support of the school’s campus. Supervision to be received: Facilities Operations and Administrative Specialist Supervision to be exercised: None Education/Licensure/Certification Required: High School Diploma or GED equivalent Must possess a valid driver’s license, pass an insurance and driver’s record check annually and be able to drive a vehicle for Milton Academy in accordance with the School’s policies and procedures Preferred: Associate’s degree, some college, or other certification(s) that demonstrate an interest in learning new skills. Experience Required: Previous experience working, volunteering, or serving others in a customer service-oriented manner Preferred: Previous experience working in a mailroom, delivery, or grounds role Competencies Required: • Demonstrated ability to use a computer, including proficiency in Google Workspace, Microsoft Office and Adobe Creative Cloud., • Ability to work collaboratively with internal and external constituencies., • Must be able to read, understand, and follow directions., • Ability to be flexible., • Demonstrates a customer service orientation., • Understands confidentiality and related issues., • Receptive to supervision and professional development. Required: • Must be able to move around the Milton Academy campus without restriction., • Must be able to regularly lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds., • Must be capable of pushing carts and using tools or equipment for event set-ups., • Must be able to drive to and from the local post office and transport mail and packages to Milton Academy., • Must be able to sustain prolonged periods of standing, walking, bending, stooping and reaching., • Excellent hand-eye coordination and the ability to use hand tools and other technical instruments in tight or confined spaces. Required: Ability to be flexible and work collaboratively. Ability to prioritize multiple projects and tasks in a fast-paced work environment. Must understand issues of confidentiality. Must be receptive to supervision and professional development. All interested internal candidates must complete an application for promotion or transfer and inform your supervisor as soon as possible. The essential functions and basic skills have been included in this job description; it is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This position description is subject to change at any time. An equal opportunity employer, Milton embraces diversity and the pursuit of excellence. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race (including natural and protective hairstyle), color, sex (including pregnancy and pregnancy related condition), sexual orientation, gender identity, gender expression, religion, religious creed, physical or mental disability, age, genetic information, veteran status, ancestry, citizenship, national or ethnic origin or any other status protected by applicable law.

Job DescriptionDescription: Relocation available for qualified candidates! The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business – not on the business of maintenance and materials management. Job Summary Our Dock & Door Technicians a.k.a. “Service Professionals” are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that’s just before lunchtime. Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity?, 2. Does the idea of autonomy and independence excite me?, 3. Can I have fun, while keeping it safe and efficient?, 4. Am I looking for a career family and not just a job?, 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! Room for Growth The exciting news about being a Service Professional is that you can start where your current skills best align with the level of work. Miner offers four levels of Service Professionals so that you can gain, advance, or refine your dock and door abilities. • Apprentice Level (Level I) – best for candidates who have a passion for learning and a willingness to train. Experience working in any related field is a plus, but most importantly an understanding of mechanics and the ability to fix a variety of products is needed., • Service Professional Level (Level II) – this is the sweet spot for anyone who has at least a year of experience in a related field and knowledge of the basic concepts of electrical and hydraulic troubleshooting. Service professionals are well attuned to customers and can communicate effectively while in the field., • Senior Level (Level III) – possesses experience in basic repairs in the AED, Highspeed, or gate fields with a proficient understanding of hydraulic and electrical troubleshooting. Candidates will typically have 4 years of experience in this field. What You’ll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn’t have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements: What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: • 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers., • Ability to repair industrial facilities, including doors, loading docks, and dock-levelr’s., • Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you!, • Ability to take direction and work independently while on the road for hours each day., • Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must., • Technical school training and OEM certifications are desired but not required., • Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need. We thought you’d never ask. Please view our benefits page to learn more about the Benefits to all Miner employees. The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. In addition to those benefits, Service Professionals can look forward to: • Competitive pay, including quarterly bonus incentives, • Uniform and boot allowance, • Training and the opportunity for growth, • Company issued truck for work travel, can be taken home as well, • Autonomy and independence, • Competitive PTO and Paid Holidays Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group’s Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company’s good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay.

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: This role supports areas of field Service operation within Sungrow USA related to commissioning, warranty, and Operations and Maintenance (O&M) of the expanding installed sites in the region. Reporting to the regional field service supervisor, this position is responsible for troubleshooting, repairing, maintaining, and commissioning support of PV inverters and ancillary equipment/ systems, usually at the customer’s site or at a staging yard/warehouse. This position will comply with the Safety Mandate, “ZERO HARM,” to ensure safe and efficient work and operation of the facility for all personnel and equipment. Ensures that personnel and safety issues are given priority to maintaining a safe and efficient working environment. Implements and enforces safety management policy and procedures regarding the facility: safety information, hazard analysis, safe operations/Maintenance Training, subcontractor compliance, plant integrity, work permits, emergency planning, and response. Duties and Responsibilities: • Perform a variety of technical assignments involving the installation, operation, testing, and maintenance of string and central solar inverter and/or BESS Systems, PCS, batteries, and ancillary equipment., • Perform general troubleshooting and diagnosis under Sungrow’s maintenance and repair guidelines., • As needed, support and perform pre-commissioning (with and without grid emulator) and commissioning of solar inverters and BESS systems within schedule and work plans, • Additionally, for those on O&M capacity, perform Preventive Maintenance and other Long Term Service Agreement (LTSA) activities per the contract, • Investigate solar plant issues such as DC array grid faults, inverter design issues, and utility grid transients. For BESS positions, these investigations may also involve SOC checks and module /component-level troubleshooting, replacement of electrical/electronic parts, SW version updates, etc., • Provide feedback to the engineering and project team on possible mechanical and electrical design improvements., • Lead upgrade/rework projects (software and hardware) in the field and interact with customers to explain the project's technical scope and manage work schedule and commitments., • Work with customer SCADA engineers to set up systems communication and parameters involving Sungrow’s controllers and F&G systems as needed., • Accurately describes troubleshooting sequences and procedures which they have observed, • Identifies and documents basic mechanical and electrical issues and problems, • Performs basic corrective maintenance, • Create/modify Field Service procedures for safety troubleshooting and maintenance if required., • When using contractors on sites, act as the Lead to ensure the contractors submit daily activity reports and JSA reports and work follows Sungrow standards and expectations., • Prepare and submit own Daily Activity Reports and Daily JSA Reports., • Work independently in the field and with Design Engineers to resolve high-level technical issues, support the investigation of the root cause for technology applications for complex projects, • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar plant operations., • Verify and comply with engineering documentation standards and test procedures., • Completes documentation in a timely and organized fashion, • Follow level-appropriate standard operating procedures., • Own creation and submission of all field paperwork and documentation for full compliance with site documentation and project requirement, • Associate’s Degree in an Engineering or Computer Science Discipline from an accredited university or college, • Renewable industry experience is desired, • Power Electronics experience is desired, • OSHA 10 certificate within 12 months of date of hire, • Strong demonstration of workplace safety practices, • Understands and follows a Safety Plan, • Comprehend Job Hazard Analysis and conduct level-appropriate Job Hazard Analysis, • Designated as Authorized Person for LOTO, • Compliant with environmental safety requirements, • Proficient in the use of Microsoft Office, including Word, Excel, Outlook, PowerPoint, • Motivated self-starter with complex problem-solving abilities., • A ‘completer-finisher’ taking accountability for ideas from inception to delivery in an environment that requires robust metrics to confirm the success., • Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of partners, senior managers, and subject matter experts., • 3 plus years of overall experience in a technical field, • 2 years of experience in solar inverters or BESS, • Must possess the ability to work with test equipment and hand tools as required., • Must be able to closely follow instructions and pre-established procedures/SOP to perform the ductions of the job, • Must be proficient in Microsoft Office Suite (Word, Excel, PowerPoint and Outlook), • OSHA, NFPA70A, Electrical Safety, • 80% Plus Work Location and Status: • Contract-to-Hire, MA/ME area, • Compensation commensurate with experience, • Competitive benefits package and employee programs Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. Thank you for your interest in Sungrow.

Job Description Same Day Service Company, a leader in the appliance repair industry for the last 30 years, is now hiring technician trainees for the Boston/Metro area. You bring your outstanding personality and motivation, we will teach you the rest. No experience necessary $25 per hour to start (50K - 65K 1st year guaranteed) Experienced techs typically earn 100K+ • Paid training, you earn while you learn, • Multiple positions available, • Career opportunity, we are investing in your future, • No weekends (Mon - Fri only), • No after hours calls, • Full support staff, • No layoffs in 30 years, • Benefit package includes health/dental/vision/life insurance/401K Match, • Company van, gas card, phone & tools provided Good driving record and valid driver's license required If you are not the office type, enjoy being hands on, and like fixing things yourself this may be the fit for you. We are excited to discuss the career opportunities that we have available. Send us a Text at 800-683-3836 or Apply now. #hc77770

Job Description Maintenance Technician, Union A family-owned and privately held property management company, First Realty Management has more than 70 years of experience with the industry knowledge to match. We combine the resources of a large company with the personal touch and attention to detail of a small, local firm. At the core of it all, our talented employees make us stand out above the rest. While we perform as a top-tier property management company, we strongly emphasize our close-knit, family-owned foundation. Professional growth is encouraged through a commitment to educational advancement and opportunities to learn from industry thought leaders. We create a sought-after community atmosphere by recognizing and celebrating those who go above and beyond. And above all else – we always put our team members first. First Realty Management Corp, a leading area property management firm is seeking an experienced Maintenance Technician to serve multiple apartments in the Boston area. We are seeking an individual who can work well independently when needed and is skilled in electrical, plumbing, carpentry, HVAC, boilers, and general maintenance work. Requirements • This individual must have the ability to adapt to changing priorities., • Good communication skills are necessary., • The individual should be service-minded and take pride in work., • Shares in on-call rotation., • Having your own hand tools is very helpful., • Prior experience in apartment maintenance is also helpful., • Reliable transportation, willingness to travel when needed, and a valid driver's license are required., • Sign-on Bonus., • Paid Vacation, Holidays, PTO/Personal leave., • 401(k) plan., • Health, Vision, Dental Insurance., • Life Insurance, Short-& Long-Term Disability., • Flex spending accounts & Transportation expense accounts.

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. What You Will Do Are you an experienced Field Service Technician? Do you have experience working with Fuel Dispensers and Point of Sale equipment? If so, apply to be a part of the OWL team today! Our Field Service Technicians complete tasks including hanging hardware (repair and/or replacement) and mechanical/electrical issues with both fuel dispensers and point of sale equipment. You must be willing to learn about other systems within the properties to assist in general maintenance needs. What We Offer You! • Competitive Compensation Package including benefits eligible on day one of employment., • Weekly Pay!, • 8 Paid National Holidays and 2 floating holidays to use at your discretion for a total of 10 per year!, • Travel per diem for traveling positions., • Flexible Paid Time Off, • 401(k) with Company Match up to 4%!, • Health, Dental, and Vision Insurance – Eligible on day one of employment!, • Health Savings Account (HSA) and Flexible Spending Account (FSA) to support you and your dependent’s medical expenses., • Disability & Occupational Accident Insurance, • Company-Paid Life Insurance Policy, • Employee Assistance Program (EAP) Perform petroleum equipment and EV Charging service and installation calls in a professional, timely, and quality manner. • Complete job paperwork for each service call, at the time of service., • Complete training courses in a timely manner to maintain current certifications and equipment knowledge., • Act as a resource for customers; aid and product support to maintain long term relationships., • Juggle multiple tasks in a fast-paced ever-changing work environment., • Communicate skillfully and effectively in person or over the phone., • Minimum 2 years of experience as a petroleum service technician., • High School Diploma or GED, • Positive Attitude, • Attention to Detail, • Minimum of 2 years’ experience or schooling in a Mechanical, Electrical, or Computer Trades, • Proficient in Microsoft Office Suite, • Written and verbal communication skills, • Willingness to work in all varied weather conditions., • Willingness to travel with the possibility of overnight jobs., • Experience with Point-of-Sale installation and repair required., • Experience working with Wayne or Gilbarco Dispensers is a plus., • Experience working with Verifone a plus., • Experience in computer networking a plus., • Clean driving record and the ability to work safely required., • Capable of lifting and caring equipment weighing up to 75 lbs.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off The Field Technician (FT) is responsible for making sure all equipment in the field is installed and maintained correctly at each customers site; also, responsible for good customer service relations including but not limited to consistent and clear communication with the client, proper follow-up, and providing solutions to ensure customer satisfaction. B. Responsibilities The following list outlines the general responsibilities of the role: Install temperature monitoring devices and products Calibrate and maintain installed equipment Develop test procedures and fixturing as required Maintain field records and perform installation/operational/ and performance Qualifications with correct information documented in database Comply with quality systems procedures as required Answer emergency service situations After receiving the proper training, the Field Technician will go on call and answer Emergency Service Situations. C. Organization Relationships The Field Technician reports to the National Service Director. JOB REQUIREMENTS: A. Education and Training The Field Technician should have a two-year technical degree, or equivalent experience as determined by the National Service Director. B. Technical Requirements The Field Technician is required to complete supervised in-house training as well as read and understand any pertinent training or department procedure manual. The Technician will be required to be proficient on all systems maintained by SafePoint Scientific. C. Experience Prior experience is not required. *MUST LIVE IN THE BOSTON AREA * This is a remote position.

Job DescriptionWho is Flock? Flock Safety is an all-in-one technology solution to eliminate crime and keep communities safe. Our intelligent platform combines the power of communities at scale - including cities, businesses, schools, and law enforcement agencies - to shape a safer future together. Our full-service, maintenance-free technology solution is trusted by communities across the country to help solve and deter crime in the pursuit of safer communities for everyone. Our holistic public safety platform is comprehensive and intelligent, providing the actionable evidence needed to solve, deter and reduce crime across neighborhoods, schools, businesses and entire cities. Without compromising transparency or privacy, we are turning unbiased data into objective answers. Flock strives to offer a career-defining experience where you can also make an impact on your community. While safety is a serious business, we are a supportive team that is optimizing the remote experience to create strong and fulfilling relationships even when we are physically apart. Our group of hard-working employees thrive in a positive and inclusive environment, where a bias towards action is rewarded. We have raised over $700M in venture capital from investors including Tiger Global, Andreessen Horowitz, Matrix Partners, Bedrock Capital, Meritech Capital Partners, and Initialized Capital. Now surpassing a $7.5B valuation, Flock is scaling intentionally and seeking the best and brightest to help us meet our goal of reducing crime in the United States by 25% in the next three years. The Opportunity Flock Safety is looking for an Installation Technician to join our Field Operations team. Our team is comprised of individuals who are results-driven, detail-oriented and combine a great work ethic with critical thinking to install products that delight our customers. Our technicians are the face of our company and interact frequently with a variety of our customers while out in the field. Job Responsibilities: * Install poles of varying lengths per install specifications. Requires digging a minimum of 8” x 36” holes. * Mount solar panels on poles and attach external batteries to solar panels * Affix license-plate reading cameras with PTZ (Pan, Tilt, Zoom) technology to poles * Work on both public and private roads, working often on equipment 10-12’ high. * Regularly work with a bucket truck and/or ladder to work on equipment up to 30 feet high. * Repair minor breaks in underground irrigation or private wiring * Provide installation pictures via the Flock field app on a mobile device * Perform administrative tasks such as inventory management and receiving product shipments * Perform work in safe and professional manner * Meet with customers to discuss installation options and perform site surveys * Interpret traffic control plan and permit drawings to identify the proper installation location for a Flock device The Skillset * This role requires frequent/continuous bending, digging, reaching, climbing, squatting, sitting, standing, walking, driving, and independently lifting up to 50 lbs. * Prior experience with field work is a plus: construction, security systems, low voltage wiring, or similar. * Prior knowledge of operating a bucket truck on occasion. * Comfortable driving a work van(Ford Transit) and occasionally a 1 ton pickup truck(Ram 3500) or towing a small trailer. * Prior use of power tools, motor vehicles and heavy equipment * Must be comfortable working on ladders at high heights * Handyman-like experience, whether personally or professionally. * Good time-management, organization and communication skills * Desire to work outdoors and comfortable working in all weather conditions and outdoor elements * General knowledge for all things tech, and the ability/desire to learn and work with new software/tools. * Basic knowledge of computer skills, Office Suite, Google Suite and email * Must be at least 21 years of age to rent a vehicle and meet company vehicle insurance requirements. Required Availability: M-F during daylight hours. Overtime is at times expected and required. Start and end times will vary based on time of year (solar constrained) and the workload. Travel: Expect to travel up to 3 hours away during service tickets regularly. Occasionally this role will require travel up to 8 hrs away. In these situations, overnight accommodations are provided. We do not anticipate the travel demand for this role to exceed 30%. Feeling uneasy that you haven’t ticked every box? That’s okay; we’ve felt that way too. Studies have shown women and minorities are less likely to apply unless they meet all qualifications. We encourage you to break the status quo and apply to roles that would make you excited to come to work every day. 90 Days at Flock We are a results-oriented culture and believe job descriptions are a thing of the past. We prescribe to 90 day plans and believe that good days, lead to good weeks, which lead to good months. This serves as a preview of the 90 day plan you will receive if you were to be hired as an Installation Technician at Flock Safety. The First 30 Days * Understand how to complete timekeeping in our payroll software & book travel * Complete OSHA 10 certification and 2 weeks of in-field Training * Introduction to the following work order types (Site Installation, Maintenance and Site Surveys) The First 60 Days * Working solo in the field with the support of your leadership team and technical support staff 90 Days & Beyond * Complete all work orders assigned, excel with the tools and metrics we use, and have built a strong relationship with your team members, leaders, and key cross-functional stakeholders. Salary & Equity In this role, you’ll receive a starting salary of $62,400 as well as stock options The Perks * 🌴Flexible PTO: We seriously mean it, plus 11 company holidays. * ⚕️Fully-paid health benefits plan for employees: including Medical, Dental, and Vision and an HSA match. * 👪Family Leave: All employees receive 12 weeks of 100% paid parental leave. Birthing parents are eligible for an additional 6-8 weeks of physical recovery time. * 🍼Fertility & Family Benefits: We have partnered with Maven, a complete digital health benefit for starting and raising a family. Flock will provide a $50,000-lifetime maximum benefit related to eligible adoption, surrogacy, or fertility expenses. * 🧠Spring Health: Spring Health offers a variety of mental health benefits, including therapy, coaching, medication management, and digital tools, all tailored to each individual's needs. * 💖Caregiver Support: We have partnered with Cariloop to provide our employees with caregiver support * 💸Carta Tax Advisor: Employees receive 1:1 sessions with Equity Tax Advisors who can address individual grants, model tax scenarios, and answer general questions. * 💚ERGs: We want all employees to thrive and feel like they belong at Flock. We offer three ERGs today - Women of Flock, Flock Proud, and Melanin Motion. If you are interested in talking to a representative from one of these, please let your recruiter know * 💻WFH Stipend: $150 per month to cover the costs of working from home. * 📚Productivity Stipend: $300 per year to use on Audible, Calm, Masterclass, Duolingo, Grammarly and so much more. * 🛠️Tools & Gear: Flock Safety-branded uniforms, tools, and safety gear as well as an annual $250 uniform expense allowance * 🚗Work Vehicle: The use of a well-equipped Flock Safety owned Sprinter van and fully-paid-for gas card #ZR Flock is an equal opportunity employer. We celebrate diverse backgrounds and thoughts and welcome everyone to apply for employment with us. We are committed to fostering an environment that is inclusive, transparent, and collaborative. Mutual respect is central to how Flock operates, and we believe the best solutions come from diverse perspectives, experiences, and skills. We embrace our differences and know that we are stronger working together. If you need assistance or an accommodation due to a disability, please email us at . This information will be treated as confidential and used only to determine an appropriate accommodation for the interview process. At Flock Safety, we compensate our employees fairly for their work. Base salary is determined by job-related experience, education/training, as well as market indicators. The range above is representative of base salary only and does not include equity, sales bonus plans (when applicable) and benefits. This range may be modified in the future. This job posting may span more than one career level. Compensation Range: $62.4K

Job Description 100% REGIONAL/NATIONAL TRAVEL (MON-FRI) Company Vehicle/Tools Provided, Company Credit Card for Travel Expenses, Paid Travel/ Training, Achieve Professional Certifications (NEBB), Cell Phone/ Daily Food Allowance, Training/ Retention Bonuses, Weekends off, Hotel & Airfare Points are Yours to Keep! The HVAC Field Service Technician role has a competitive salary based on experience. Wellness Benefits: Medical, Dental, Vision, HSA, EAP, FSA, FSA Dependent Care, and Wellness program. Life, short-term, and long-term disability company-sponsored plans. Financial Benefits: Competitive pay, retention bonuses, employee-owned, 401K plan with match, paid time off, paid holidays, bereavement, paternal leave, jury duty, and tuition reimbursement. We are looking for a full-time HVAC Field Service Technician professional to join our Services team. As a small-medium sized business in the emerging energy efficiency space, we partner with some of the largest retailers, restaurants, and grocers in the world to ensure high quality and energy-efficient buildings! Our national network of engineers and technicians is unique in this field and provides a solid platform for future growth. The ideal candidate will be able to demonstrate exceptional communication and integrity while maintaining a high level of service excellence. Essential Duties and Responsibilities: • Perform system commissioning for commercial buildings including Air/Water Balance, Indoor Air Quality (IAQ) testing, Equipment start-up, and Quality Assurance (QA) testing., • Write technical reports at project completion for submission to customer., • Provide technical support to Customers and Contractors to resolve issues rapidly and thoroughly., • Make recommendations for potential service enhancements or modifications to meet the ever-changing needs of the customer base., • Provide technical support to customers and contractors., • 100%+ travel required (regional or national)., • 1+ year of HVAC experience required, • Proficient in MS Office (Excel, Word, PowerPoint and Visio), • Mechanical experience preferred, • NEBB, AABC, TABB & NBC certified is a plus, • Mechanical, electrical, and controls knowledge preferred, • Superior Customer Service Skills, • Excellent written and verbal communication skills, • High emotional intelligence, positive attitude, and a service leadership philosophy, • High attention to detail, follow-up, multi-tasking, and conflict resolution, • Able to demonstrate a high level of integrity and a penchant for high quality, • Must possess a strong work ethic and a high level of self-accountability, • Able to establish and maintain effective working relationships with co-workers, contractors, and customers, • OSHA 30 Hour training preferred, • Bilingual (Spanish speaking) would be beneficial The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Requires ability to walk, climb, stand, carry materials, stoop, kneel, bend at waist., • Must be able to climb a minimum 30 foot ladder, • Maximum unassisted lift = 50 lbs. Average lift less than 20 lbs., • Exposed to seasonal weather based on geographic region, • Exposed to moving parts and electricity that require safety protocols, • Exposure to varied travel conditions either driving or flying Perks: • Travel The Country - 100% Travel, • Paid Training: Classroom, Online, & Field, • Become an Employee Owner, • Company Provided: Vehicle, Tools, Laptop/Tablet, • Hotel & Airfare Loyalty Points Are Yours to Keep, • Gain Experience with All Equipment Types & Nearly All OEMs, • Paid Travel & Overtime, • Company Credit Card for Travel Expenses, • Achieve Professional Certifications, • Clothing Stipend & Cell Phone Allowance Training & Retention Bonuses, • Weekends Home, • Independent Work Life, • Learn A High Demand Skill Set, • Practical Hands-On Experience KIFFErbqUy

Job DescriptionOverview Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description Allied Universal Technology Services® is hiring a Service Technician to drive our mission of being the world's most trusted service provider. The technician will perform service, maintenance, repair, and diagnostics on access control systems and IP-based video equipment, including electrified/non-electrified locks, card readers, IP/analog cameras, intercoms, video recorders, and wired/wireless systems. Salary range: $32-$52/hour Up to $5,000 signing bonus! RESPONSIBILITIES: • Travel to commercial client sites to service, identify, repair, troubleshoot, and detect access control equipment and IP based video security systems. Including but not limited to:, • Electrified/non-electrified locks, card readers, ancillary door devices, • IP/analog cameras, head-end video recording devices, • Wired/wireless systems and intercom systems, • Troubleshoot and resolve installation issues efficiently and effectively to ensure company compliance, standards and building codes, as well as company safety policies and procedures, • Execute, document and track service-related issues through ServiceNow in accordance with Federal, State and local regulations, • Interpret electrical schematics, CAD drawings and related documents for use in low-voltage applications, • Provide phone and on-line remote diagnostic support with a high level of customer service to both internal and external clients, • High school diploma or equivalent, • Must possess a valid Driver's License with at least one year of driving experience, a clean driving record (no major violations within last 36 months, no more than 1 accident in last 24 months, no more than one minor moving violation in last 24 months), a minimum level of insurance as required by Company policy, and the ability to safely operate a company-issued vehicle, • Minimum of two (2) years of field experience in the electronic security industry, • Possession of state-specific licensing or ability to obtain and hold license once hired, • Proficient computer skills with the ability to quickly navigate and oversee the use of multiple systems and applications, • Exceptional interpersonal and communication (both oral and written) skills to document and report important information with all levels of the organization, • Ensure the completion of tasks and projects, both independently and as part of a team, to meet deadlines and contribute to the overall success of the organization, • Available for scheduled “on-call" duties to respond to emergency service tickets/requests, • Strong troubleshooting skills, mechanical and electronics aptitude, • Ability to work with a variety of hand and power tools, • Experience in the electronic security industry, • Salary range: $30-$52 / hour, • Up to $5,000 signing bonus!, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401 (k) or Supplemental Income Plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-EB1 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1423414

Job Description About Us Keystone Management is directed by experienced professionals. From managing the world's busiest airport and biggest airline, to managing the largest cereal manufacturing facility, our experience in specialized, technical industrial, facility, and aviation services are second to none. We provide various asset management and operations-oriented technical services such as building maintenance, preventive maintenance, project management, construction management, energy management, repairs, and troubleshooting of facility assets. JOB SUMMARY The Facilities Maintenance Technician III, under supervision, is responsible for performing essential preventive maintenance and repair of building plumbing, mechanical, electrical, and control systems, including refrigeration, and A/C units at the hangar and terminal locations. Location: Logan International Airport (BOS) Boston, MA Shift: 2:00 PM-10:30 PM Hourly Range: $32.00-36.00 Per Hour ESSENTIAL JOB DUTIES AND RESPONSIBILITIES • Repair, maintain/monitor all equipment and amenities., • Diagnose equipment issues and assist in the diagnosis of process-related problems through collaborative teamwork., • Change all filters for HVAC as required., • Change light bulbs, interior and exterior, as needed., • Use computer-based CMMS system to create and closeout work orders with data including labor hours, equipment maintenance and parts used., • Carry a company radio/cell phone for coverage and site-wide communication., • Available to work flexible hours., • Available for an assigned emergency on-call schedule., • Assists/Escort outside service personnel, inspectors and vendors., • Keeps workspace neat, clean and free of clutter., • Understand and comply with OSHA, Safety and PPE requirements., • HS Diploma or Equivalent, • Certification in a skilled trade or system is a must, • Experience performing preventative maintenance (PM’s) on equipment, • Experience fitting industrial piping systems with materials such as, PVC, copper, stainless steel instrument tubing is a plus, • Experience with steam systems and heat exchanges is preferred, • Strong customer service skills, • Excellent communication skills, • Strong problem-solving skills, • Detail oriented, • Willing to go above and beyond, • Takes pride in their appearance, • High level of professionalism, • Ability to work in a fast-paced environment and perform well under pressure, • Adaptable, • Positive attitude, • Willingness to share knowledge with team members, supervisors, and customer, • Self-discipline, • Ability to stand for long periods, • Ability to walk on level, uneven and slippery surfaces, • Ability to frequently reach, twist, turn, kneel, bend, squat and stoop, • Ability to operate office equipment, computer and tools, • Correctable vision and hearing, • Ability to walk long distances within the airport, • Ability to regularly lift, drag, carry and push equipment, tools and supplies up to 75 pounds, • Ability to climb ladders, • Ability to function in high-pressure situations, • Ability to drive a vehicle, • Exposure to mechanical, electrical and noise hazards, • Pass a drug test, • Pass a Keystone Management background check, • Pass a Federal Aviation Administration background check, • Pass a driving history check, • Possess a current driving license Powered by JazzHR SXTjsmvj94

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Dental insurance, • Flexible schedule, • Health insurance, • Opportunity for advancement, • Paid time off, • Profit sharing Position Overview: We are looking for a technician-level candidate with a minimum of 5 years of experience, particularly in industrial hygiene. Experience with mold investigations, asbestos, and lead-based paint is highly desirable. Certifications in asbestos and lead are a plus, as the successful candidate will support our Certified Industrial Hygienists (CIHs) on a variety of field investigations and assessments. Key Responsibilities: Perform site inspections, air monitoring, and sample collection for mold, asbestos, lead, and other contaminants Support Certified Industrial Hygienists with field data collection, instrument calibration, and documentation Conduct environmental sampling (air, dust, soil, water) in accordance with industry and regulatory standards Prepare field reports and assist with data entry and technical documentation Assist with hazardous building material surveys and indoor air quality assessments Travel throughout the New England region as project needs arise Preferred Qualifications: 5+ years of field experience in industrial hygiene or environmental consulting Current Massachusetts or other New England state certifications in asbestos and/or lead Mold investigation experience strongly preferred OSHA 40-hour HAZWOPER certification (or willingness to obtain) Strong attention to detail and ability to follow standard operating procedures Effective verbal and written communication skills Valid drivers license and ability to travel regionally About HETI: Founded in 1986, HETI is a full-service, nationwide environmental consulting firm providing services in site assessment, remediation, risk characterization, industrial hygiene, and occupational health & safety. We serve commercial, industrial, government, legal, and insurance clients across the U.S. through our regional office network. We are an Equal Opportunity Employer and offer a competitive benefit package including base salary plus bonus opportunities and a friendly, flexible work environment. We look forward to hearing from you. Flexible work from home options available.

Job Description Come join our growing team! If you are looking for a rewarding role with opportunities for growth at a company that values integrity, innovation, and teamwork, look no further! Barkan Management Company is a leading property management firm serving over 200 residential communities across 8 states, with regional offices in Boston and Washington D.C. Founded in 1964, we have over 50 years of experience in real estate, specializing in community association and multi-family management, encompassing market rate and affordable housing. Our team of over 800 talented professionals shares a commitment to delivering unparalleled service, maintaining the highest quality standards, and exceeding client expectations. Join us as we continue to redefine the standards of excellence in property management! Who we need: We are looking for a motivated, experienced, hands-on Maintenance Technician. This is a full-time, non-exempt, position reporting to the Facilities Manager. The role is based in Boston, MA. Candidates must possess excellent communication and customer service skills, be professionally mannered and reliable, and preferably live within [30 miles] of the community for efficient response time. Pay commensurate with experience. What you’ll do: The Maintenance Technician is responsible for assisting the manager with the physical plant, including preventive, responsive, routine and emergency maintenance throughout the property. Under the direction of the manager, the maintenance technician will perform some tasks as part of a team, and for some tasks individually, such as the maintenance items listed below: • Assigned maintenance tasks such as: Painting, electrical, plumbing, flooring, general carpentry, HVAC issues, window/glass repair, door/lock repair, minor repairs in common areas, completion of work orders, assisting to keep the grounds and common areas free of trash and debris, physical plant preventive, responsive, emergency and routine maintenance, inspecting grounds, buildings, and other community features throughout our property., • Completing special projects, tasks or duties as assigned by Facilities Manager and/or Property Manager., • Provide in-unit maintenance for residents such as: Minor repairs, troubleshooting appliances, light bulb replacements, and handyman services., • Performing emergency on-call service for after-hours maintenance-related issues as required., • Fostering a positive and respectful attitude toward residents, vendors, and staff; working patiently, professionally and cooperatively., • Communicating effectively with residents, fellow associates, vendors and supervisors, • Complying with all personnel management policies and procedures, • Ensuring adherence to the company’s safety and operating policies, standards and procedures, • Working with the Facilities Manager to ensure the physical condition and appearance of the property will enhance the value of the community. What we’re looking for: • Professional Experience Required: Minimum 2 years of experience in community building maintenance, or related trade., • Must be able to move up to 50 pounds variable distances, • Mobility and flexibility to use ladders to heights in excess of 8 feet, • Ability to work outdoors in temperatures above 90 degrees or below 32 degrees Fahrenheit as assigned when necessary, • Use of general maintenance equipment including but not limited to: hand tools, ladders, and required safety equipment., • Hands-on repair and maintenance work constitutes majority of time and duties, • Ability to follow instructions, team attitude with the ability to work independently, excellent communication skills, organized, strong customer service skills, detail oriented and efficient., • Basic computer and Internet abilities., • Must complete tasks assigned in a timely manner. What we can do for you! Barkan offers a competitive compensation and benefits package to full-time employees that includes: • Medical/Dental/Vision, • Flexible Spending Accounts, • Life Insurance, • Short and Long-Term Disability, • Paid Time Off, • 401(k) Match, • Group Legal/Critical Illness/Hospitalization/Accident/Pet Insurance, • Employee Assistance Program The Barkan Companies is an equal opportunity employer that is committed to inclusion and diversity. We take affirmative action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics. Requisition #2367

Job Description Overall Position Objectives: We are looking for a team-oriented Maintenance Technician for our Chestnut Hill location. We are looking for professionals who are great communicators, problem solvers, and who take a proactive approach to their work as we continue to take the property to the next level. Key Position Accountabilities: • Operate and maintain a variety of equipment to perform minor repairs and maintain cleanliness of the property’s interior and exterior., • Will be required when needed to work weekends and/or evenings as required by management and respond to emergency maintenance related situations as needed., • Perform variety of maintenance/minor repair activities on the interior/exterior areas of the property including, but not limited to, painting, drywall, tile work, light bulb replacement, plumbing, door repairs, including parking lot and sidewalk repair., • Can read blueprints of buildings and underground utilities for the property., • Follow and adhere to all OSHA required guidelines., • Operate lift equipment and ladders to perform preventative maintenance and make repairs., • Inspect and maintain interior/exterior areas regarding cleanliness and risk management issues and inform departmental management of priority repair issues., • Maintain roof drains on all buildings and inspect all catch basins monthly on property for backups and good condition. Perform emergency roof patching as needed., • Inspect all service courts making sure that service courts are clean and safe for Tenants., • Maintain all common areas, sprinkler rooms and electrical rooms for safety and cleanliness., • Purchase and pick-up supplies and materials as needed to perform specific tasks., • General knowledge of plumbing and drain systems a plus to help with maintaining public restrooms across the property., • General knowledge to inspect, repair and maintain electrical, HVAC and other utility services a plus., • Create and implement checklists regarding daily, weekly, and monthly tasks as related to the property’s specific needs., • Making sure that Housekeeping is maintaining the grounds to high standards. Follow up with housekeeping on all projects for the property., • Able to offer assistance to customers by answering questions to create excellent customer service and goodwill. You will have an immediate opportunity to jump in and help on a wide range of projects as the right hand to the Property Operations & Tenant Construction Manager. For example, assisting management with our work order process for the property will be an immediate chance to streamline process and create value. Requirements • Strong problem-solving skills. Organizational skills a plus., • Valid Driver’s License., • Can-do attitude, initiative, humility, and strong work ethic., • Ability to handle multiple projects simultaneously and an adaptability to change., • Good oral and interpersonal skills; bilingual language skills a plus; English speaking skills a must. Massachusetts-based WS Development is a mixed-use developer with a singular mission: creating places people want to be. With an approach that values art, science, innovation and, above all else, people, WS strives to engage each community it serves with best-in-class experiences, designed with our customers, tenants and partners in mind. Established in 1990, WS is one of few vertically-integrated real estate companies that conceptualizes, owns, operates and leases more than 100 properties that range from cutting-edge urban spaces to lifestyle and community centers. With over 22 million square feet of existing space and an additional nine million square feet under development, it is one of the largest privately-owned development firms in the country. WS is where great ideas and great people come together to design, build, and operate some of the best loved real estate projects in the country. We live at the intersection of entrepreneurship and establishment. We have the infrastructure of decades supporting a culture of free-thinking excellence. We expect every WS employee to feel welcomed and valued irrespective of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, disability, age, veteran status, marital status, parental status, cultural background, and life experiences. Or for any other reason.

Job Description We are seeking an experienced Facilities Technician to join the team. The successful candidate will be detailed oriented, organized, and have a strong desire to learn. Key responsibilities will be performing or overseeing vendor performed maintenance/calibrations on GMP Utility systems, process equipment and clean room infrastructure in a highly regulated cGMP environment. The candidate must be willing to support on-call rotation and support additional shift coverage as needed including annual shutdown support. Responsibilities: • Utilizes CMMS to manage the completion of all maintenance assignments., • Comply with Good Manufacturing Practices (GMP) requirements to include detailed documentation of work performed in both electronic and written form., • Reports any maintenance failure or issues immediately to management., • Evaluates equipment performance and makes recommendations to maintenance performance or system design., • Seeks to continuously improve maintenance practices., • Interpret P&IDs, equipment/system layouts, wiring diagrams, and specifications to plan and perform maintenance and repair activities., • Provides support during annual shutdowns., • Routine performance of preventative maintenance on process support systems and equipment including but not limited to: Pumps, Valves, Autoclaves, Centrifuges, Reactors, BSC's, Isolators, WFI Generation/Distribution, Clean Steam, compressed gases, HVAC equipment, • Conducts rounds of GMP and non-GMP equipment and systems., • Inspect, operate, or test machinery or equipment to diagnose machine malfunctions., • Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions., • Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary., • Repair machines, equipment, or structures, using tools such as hammers, hoists, saws, drills, wrenches, or equipment such as precision measuring instruments or electrical or electronic testing devices., • Maintain or repair specialized equipment or machinery located in cafeterias, laundries, hospitals, stores, offices, or factories., • Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment., • Maintains all spaces clean and orderly., • Coordinating and escorting contractors and vendors for the performance of preventative maintenance and repairs on process support systems., • Supports quality systems for CAPA, Deviations and Change Management. Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools., • Support Annual Shutdown, On-Call rotation and shift coverage. Requirements: • High School diploma, GED, or equivalent required, • Trade school or undergraduate education is preferred, • Professionally Licensed in any of the following areas desirable: Wastewater Treatment, Plumbing, Electrical, Refrigeration., • 1 + years of applicable experience in a GMP environment is preferred, • Ability to multitask and always maintain professionalism, • Proficient in Microsoft Office products (Outlook, Word, Excel, etc.), • Experience working with Blue Mountain RAM or other CMMS programs preferred, • Experience with DeltaV PCS System or other control system is a plus, • Ability to read, understand, and follow SOP, P&ID's and work instructions., • Contract position with possible extension

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Free uniforms, • Paid time off, • Competitive salary At Surface Experts Boston and South, we dont just fix things we bring surfaces back to life! Whether its bathtubs, counters, floors, cabinets, or appliances, we specialize in providing top-tier repair solutions with precision, craftsmanship, and outstanding customer service. If youre passionate about hands-on work, take pride in problem-solving, and want to grow your skills in a thriving environment, wed love to have you on our team! What Youll Do As a Bathtub Repair Technician: We are looking for someone who has experience in either the process of fabricating or installing bathtubs. Familiarity with the common tub building materials: fiberglass, gel coat, enameled steel and acrylic. We repair damages to tubs that happen during or after installation. Youll be the hero turning damaged surfaces into masterpieces. From multi-family properties to residential homes, youll help restore surfaces as tenants move out and new ones move in. Were hiring for full-time roles to keep up with growing demand. Heres how youll make an impact: Repair and restore bathtubs, counters, floors, cabinets, and more, making them look like new. Assess damage, recommend the best repair solutions, and use tools and materials with confidence. Collaborate with property managers and clients to understand their needs and exceed expectations. Maintain an organized work environment and keep the service vehicle neat and stocked. Our mission at Surface Experts, our mission is to develop outstanding teams by investing in strong relationships. Together we work to solve our customers problems by reducing the waste of time, money and materials which end up in landfills. What Were Looking For Are you handy, motivated, and love to learn? This role could be a perfect fit! Heres what wed like: • A keen eye for color matching and attention to detail. (Art background can help you accel), • A desire to learn how to repair bathtubs, counters, floors, and cabinets (No prior experience? No problemwell train you!)., • Familiarity with hand tools and an interest in mechanical or repair work., • Strong communication skills and a customer-first mindset., • The ability to work independently and as part of a team with an excellent work ethic.Perks & Benefits We believe great work deserves great rewards. Heres what you can look forward to: • Competitive pay based on experience, plus a bonus structure., • Paid, hands-on training to master the craft. Pay is based on experience and performance., • A company vehicle for travel to job sites., • Paid holidays and accruable vacation, • Health Insurance Stipend after probationary period., • Provided company uniforms., • Opportunities for growth and professional development.A supportive team culture where your work truly matters., • Learn a new trade and grow with a thriving, emerging business!Join Our Team At Surface Experts, we take pride in craftsmanship, integrity, and delighting our customers. If that sounds like a team you want to be part of, apply now! Please submit your resume and cover letter detailing your most recent experience. Transforming Surfaces. Building Careers. Growing Together. Surface Experts Boston and South is an equal opportunity employer that celebrates diversity in the workplace. Learn more about what it means to work with Surface Experts: Watch this video This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Surface Experts Corporate.

Job Description SUMMARY Performs required diagnostics and repair of HVAC and oil heating systems. ESSENTIAL DUTIES AND RESPONSIBILITIES • Document services performed and parts used, • Previous experience servicing oil heating systems and air conditioning systems, • Have the proper tools to perform the required services, • Installation of all heating and cooling equipment QUALIFICATIONS • Possess a valid driver’s license, • Possess good customer skills, • Possess a valid MA Oil Burner Technician License / Certificate, • Installation experience a plus, • Air conditioning certification a plus, • Ability to drive a service van, • A flexible work schedule is required - nights, weekends & holidays, • Ability to digitally receive, update and complete service work, • Personal cell phone LANGUAGE SKILLS Excellent communication skills are necessary. Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rates, ratios and percentages.

Job DescriptionDescription: Who we are: Aerzen USA Corp. is an international manufacturer of positive displacement blowers, hybrid blowers, screw compressors and turbo blowers. These high-quality machines are used for air and gas applications across many essential industries, including; Wastewater, Cement, Biogas, Pharmaceutical and Food, among many others. We are One Team, and we Empower our team members to be both Inquisitive and Evolutionary. What We Offer: Aerzen USA offers a competitive salary; generous health benefits (to include 96% company-paid benefit plans) with company HSA contribution; a 401(k) with company match; a tuition reimbursement program; and a profit share bonus package; along with the opportunity to work with a dynamic group of professionals. What You’ll Do: As a Field Service Technician - Northeast Region, you will perform and carry out all tasks related to installing, assembling, servicing, and repairing Aerzen products. You are also responsible for providing customers with prompt, professional and high-quality service. Work is performed at our location and/or at our customer’s location. Services provided may be scheduled or on-demand. Overnight travel on short notice is often required. Position Requirements: • Approximately 100% travel, often four nights away weekly, on a continuous basis. This role covers the Northeast Region, including NY, NJ, CT & MA., • Performs startups, equipment inspections, troubleshooting, repairs and/or preventive maintenance service on all Aerzen Products at customer sites; Represent Aerzen in professional and courteous manner following all Aerzen and customer safety requirements., • Installing, configuring, calibrating and maintaining control, measurement and indicating instrumentation (pneumatic, analog & digital); Installing and terminating electrical, pneumatic and fluid connections; Understand controls narratives and analyze/troubleshoot process application related issues., • Analyzing and correcting communication issues; Properly address TCP/IP networks and RS-485 communications., • Perform repairs and assembly on Aerzen Products; Disassemble; assess damage and evaluate failures on machines; diagnose problems with Aerzen machines by evaluating material condition and asking the customer questions; demonstrates the ability to offer machine-based recommendations; can identify the root cause of a machine failure; Utilize defined procedures and a standard rebuild kit., • Read, understand and use equipment diagrams, checklists, engineering drawings, and other process documentation to perform service tasks, assembly and repairs on Aerzen Products., • Communicate with customers to discuss job requirements, provide recommendations and service options, listen to customer concerns, and provide status updates during service call and at completion., • Assist engineering in plant design, modifications and hazard analysis., • Complete written repair reports to document cause of failure, description of work performed, materials consumed, condition of equipment as received and as returned to the customer., • Conduct customer training on Aerzen Products when onsite.Requirements: Education Requirements: High School Diploma or associate degree (2 years schooling) in electronics technology, or associated field. 5+ years of field experience will also be considered in lieu of degree. Experience: Over 4 years of Field Service and Repair experience. Skills & Other Requirements: • Ability to read and interpret diagrams (dimensions, assembly, electrical), • Proper use of micrometer, dial indicator, feeler gauges and coordinate measuring tools, • Ability to regularly use a forklift, ladder, hand tools, power tools, welding, calibrated measurement devices, hydraulic equipment is a must. Aerzen USA was founded in 1983 and is a wholly owned subsidiary of Aerzener Maschinenfabrik GmbH, a recognized world leader in the production of rotary positive displacement machines since 1868. Aerzen USA is headquartered in Coatesville, PA, with multiple offices and service centers throughout the United States. Aerzen USA designs and manufactures positive displacement blowers, hybrid blowers, screw compressors, and high-speed turbo blowers with installations around the world. The company specializes in wastewater treatment aeration, pneumatic conveying of bulk materials, and process gas conveying with high-efficiency equipment and world-class product service and support. For more information visit our website at: Aerzen USA Corp is an equal opportunity employer and selects employees on the basis of skills and experience. Aerzen USA ensures that all persons are entitled to equal employment opportunity without regard to race, color, gender, gender identity, sexual orientation, pregnancy, age, national origin, religion, marital status, ancestry, disability, veteran’s status, and any other characteristic protected under applicable federal, state, or local laws. All employment decisions and actions are based on merit and made without regard to any characteristic protected by state, federal or local law. All offers of employment at Aerzen USA Corp are contingent upon clear results of a thorough background check. In compliance with the Drug-Free Workplace Act of 1988, Aerzen USA Corp has a longstanding commitment to provide a safe, quality-oriented, and productive work environment. Alcohol and drug misuse poses a threat to the health and safety of Aerzen employees and to the security of the company's equipment and facilities. For these reasons, Aerzen USA Corp is committed to the elimination of drug and alcohol use and misuse in the workplace. Applicants being considered for hire must pass a drug test before beginning work. Refusal to submit to testing will result in disqualification of further employment consideration. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including termination of employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9. #LI-Remote

Job Description National Carwash Solutions has grown over the past 45 years to become North America’s largest equipment, service, and cleaning solutions provider in the car wash industry! NCS is seeking a Field Service Maintenance Technicians! National Carwash Solutions, Inc. has world-class brands that are backed by the largest service network in the country with more than 300 dedicated service professionals and growing! Come join us for an extraordinary career in a high growth, team-oriented company! APPLY TODAY!!! Position Details: The Field Service Maintenance Technician (FST) operates on-site to perform preventive maintenance, repair equipment, and install replacement parts related to NCS vehicle wash equipment and accessories. The FST will also train customers on basic equipment maintenance. What You’ll Do: • Perform service work on vehicle wash equipment and accessories including trouble shooting of electrical, electronic, and mechanical problems to ascertain the needed corrective action., • Replace, repair, or adjust parts and systems as necessary., • In accordance with preventive maintenance contracts, the technician inspects, calibrates, and checks all chemicals., • Run equipment through "cycles" to ensure the complete system is functioning properly., • Advises customer of necessary service work and make recommendations to customers regarding replacement of worn or damaged parts, systems, etc., • Following unit installation inspects equipment to ensure proper function., • Provide information and training to customer regarding proper operation and general maintenance of equipment., • Develop and maintain good rapport with customers, constantly striving to provide Positively Outrageous Service and ensure customer satisfaction., • May deliver parts or supplies to customers., • Completes work orders, expense reports, and daily and weekly time logs., • Maintain up-to-date knowledge of equipment changes or modification through various resources such as training seminars, maintenance manuals, and service bulletins, or engineering documents, as well as individual research and other correspondence., • Maintains proper inventory of parts on service vehicle and in warehouse; reports level of field inventory as required., • Responsible for knowing and complying with all service policies and procedures., • Keeps Service Manager informed of all significant problems, progress, or difficulties., • Responsible for following all policies and procedures pertaining to NCS’s Quality System, • Other job-related duties as assigned. Physical Requirements: • Ability to lift items of light to heavy weight, up to 50 lbs., • Ability to intermittently and repeatedly bend, stoop, kneel, reach, twist, perform repetitive motions using hands to grasp, push, pull, or do fine manipulations, climb ladders, and stand for prolonged periods. What You Need: • High school diploma, • Associates Degree from a two-year college or technical/trade school plus a minimum of one (1) year industry related experience; OR equivalent combination of education and experience, • Minimum of 3 years’ experience:, • As a field technician or related technician, • Industrial Mechanical, Pneumatics, PLC experience, • Electrical Experience - including 3 phase., • Bi-lingual skills required - English and Spanish, • Clean driving record with no more than three (3) moving violations within the past 5 years; no more than two (2) preventable, at-fault accidents within the past 5 years., • No impaired driving convictions within the past five (5) years and no charges currently pending., • Willing and able to travel assigned geography on a daily basis; may include overnights as needed., • Able to work rotating on-call weekend schedule, as assigned., • Ability to use basic math and writing skills., • Capable of accurately reading and interpreting schematics and blueprints, • Ability to comprehend and interpret equipment, operating, and maintenance manuals and instructions., • Ability to successfully work independently or within a team., • Forklift experience/certification desired but will train., • Committed to customer satisfaction and ability to adapt/respond to different personalities., • Ability to multi-task, prioritizes, and manages time effectively., • Intermediate computer skills, and email communication, • Must possess excellent communication and organizational skills., • Must have adequate sight to read blueprints and other engineering documents and/or work orders and other field service documents. Grow your career supported by an energized and passionate team, professional development, training, flexibility, and opportunities for advancement. We offer competitive wages and benefits including comprehensive health, dental and vision coverage, matching 401(k), paid time off and more. National Carwash Solutions is a proud equal opportunity employer. We are a drug free, EEO employer committed to a diverse workforce. We will consider all qualified candidates regardless of race, color, national origin, sex age, marital status, personal appearance, sexual orientation, gender identity, family responsibilities, disability, education, political affiliation, or veteran status. Position Salary Range: $27 - $30 Benefits: • Medical, Dental, and Vision, • 401(k) Retirement and Savings Plan with matching contribution, • Life, AD&D, Accident and Critical Illness Insurance, • Short Term Disability, • Vacation, Sick and Holiday pay, • Health Saving Account and Flexible Spending Accounts, • Pet Insurance, • Employee Assistance Program, • Opportunity for Short Term and Long-Term Incentives

Job Description Charles Gate Property Management is seeking a smart, organized, and proactive Maintenance Technician to join our growing team. The Maintenance Technician is responsible for day-to-day multiple maintenance service requests and repair and upkeep services within a portfolio of Boston and Metro North Boston area residential apartment and condominium buildings under the direction of the Property Managers. The ideal candidate will have 1+ years of residential property maintenance experience, and must have a well-rounded industry skill set, and external outside contractor supervisory experience, including communication and coordination. Work is to be performed in a high-quality manner with a sense of urgency. Clients and property must be treated with the utmost respect and hospitality. A valid driver’s license, well running vehicle/truck, and a set of tools are required for the job. Location: Boston and Metro North Boston area (but willing to travel as needed to maintain coverage) Shift: 1st Shift M-F Full Time Pay Rate: $25.00+ DOE plus industry leading mileage reimbursement. Overtime: Available separately @ 1.5 for On Call and Snow Removal Comprehensive Benefits Package Health insurance, PTO, 401K/FSA/supplemental insurance Responsibilities of a Maintenance Technician: ● Completion of all maintenance service requests as assigned. ● Complete turnover inspection and repair process of vacant apartments as directed by the Property Manager. ● Schedule and complete regular preventative maintenance ● Coordinate special projects as directed by the Property Manager. ● Coordinate access and assist in monitoring all work being performed by outside contractors and vendors. ● Providing for 24-hour emergency maintenance service as scheduled. ● Monitor and maintain building systems as assigned. ● Responsible for alerting the Property Manager of any unusual occurrence and/or damage that have taken place or that may occur. ● Must be able to solve maintenance and repair issues enthusiastically and creatively as they arise. ● Maintain a professional courteous manner with all clients, residents, vendors, contractors, and fellow employees. ● Assure safety standards are used which comply with all company, local, city, state and federal guidelines. ● This job requires exerting 50+ pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly. Qualifications of a Maintenance Technician: ● High School or GED required ● Personal Vehicle/ Own tools required (Basic) ● Certifications, Current Special Licenses (HVAC, Electrical) highly encouraged. ● 1+ years professional maintenance experience in a fast-paced environment, serving a wide range of tasks and a high level of communication. ● Experience in the property management industry or hospitality is required. ● Experience specifically in residential property management is highly recommended. ● Plumbing: includes the repair, replacement or installation of faucets, pipes, hot water tanks, toilets, garbage disposals, dishwashers, water-dispensing refrigerators, and washing machines. ● Electrical: includes the repair, replacement or installation of power switches, fuses, wall sockets, ceiling lights, ceiling fans, climate control systems, and garage doors openers. ● Drywall repair: includes filling in small holes caused by nails and minor dings from normal wear and tear - most performed between the time a tenant vacates a unit and a new renter assumes occupancy. ● Painting: includes minor touch-ups following damage repair and new coats of paint applied to unit walls between the time a tenant vacates a unit, and a new renter assumes occupancy. ● Appliance repair: includes the repair, replacement, or installation of major household appliances, such as refrigerators, dishwashers, range ovens, washers and dryers, hot water tanks, and air conditioners. ● Snow removal: includes shoveling, blowing, or plowing snow away from covered walkways and driveways, and laying down rock salt on icy surfaces to prevent slipping. ABOUT CHARLESGATE CHARLESGATE is an integrated real estate firm that empowers thousands of clients throughout Eastern Massachusetts with a comprehensive array of services across residential and multifamily commercial real estate - property management & leasing, sales brokerage, investment sales, construction, and new development. With deep, local roots, we were founded in Boston in 2003 and are headquartered in the Back Bay. We are rapidly growing, including making the Inc 5000 list of the fastest-growing private companies in America. Our VISION is to inspire and empower our clients, our team, and our communities through comprehensive real estate solutions. As a Values based firm, we are founded on the Core Principles of ETHICS. RELATIONSHIPS. RESULTS. as well as our Seven Fundamental Cultural Values that we expect our team to exhibit: ● Positive Attitude. Smile and move. ● Empathy. Seek first to understand the perspectives of others. ● Proactivity. Bias towards action using good judgment. ● Ownership. See the big picture. ● Curiosity. Think, learn, and rapidly improve. ● Resourcefulness. Be effective. ● Communication. Be concise, articulate and make meaning clear. Employees First! We are an employee first organization that believes that being committed to our employees first is the only way we can deliver the best service to our clients. Our office culture and work environment is second to none to promote harmony in all of our lives Powered by JazzHR tlNA2moj8Y

Job Description Great money. Great benefits. We know you have a lot of options for work these days, so let’s cut to the chase. We ask you to join our team, because we believe there’s no better place to build or finish your career in the security systems industry. We’ve been at this for 52 years, still family-owned, and the first employee we hired is still with us today. That tells you something about how we value people, and how our employees value working here. We are seeking talented technicians to work in our Commercial Installation group from our headquarters in Arlington, Massachusetts. We offer a $5,000 Sign-on Bonus for Licensed Technicians Candidates must have: A Massachusetts Systems Technician “D” license or Journeyman “B” license, or the equivalent in other states. You will be proficient with residential and commercial security systems installation, programming and service, including but not limited to: Burglar Alarm Systems, Fire Alarm Systems, Access Control Systems, Video Systems, Intercom Systems, and networking. You must have a valid driver’s license and be able to drive a company vehicle. Backgrounds checks are required. Benefits: Work/Life Balance • Generous Vacation and Personal Time, • Company Paid Holidays, • Medical, Dental Vision, • 401(k) with Company Match, • Tuition Assistance Program, • Real Estate and Computer Purchase Loans, • Company Paid Short-Term Disability, • Voluntary Benefits Discounts, • Multiple Employee Discount Programs, • DCU Credit Union Membership To learn more, please visit . Americans With Disabilities Act American Alarm & Communications, Inc. complies with all aspects of the Americans with Disabilities Act (ADA) and state disability laws. This means that we will not discriminate against qualified individuals with a disability in any phase of the employment relationship including application for employment, hiring, promotions and/or advancement opportunities, termination, compensation, training and any other conditions or privileges of employment. American Alarm & Communications, Inc. is committed to equal employment opportunity and nondiscrimination for all employees and qualified applicants without regard to a person's race, color, sex, gender identity or expression, age, religion, national origin, ancestry, ethnicity, disability, veteran status, genetic information, sexual orientation, marital status, or any other characteristic protected under applicable law.

Job Description Why DH Pace? DH Pace Company is a distribution, construction and service organization offering a complete range of door and door related products and commercial security products. The company is privately owned and has been in operation over 95 years! We have 50+ US offices in 24 states with 2024 company-wide sales over $1 billion. Our mission is to enhance the communities we serve by improving the safety, convenience, and aesthetics of the buildings where we live, work, and play. Our foundation of values represents who we are and what we stand for. Values are never situational or circumstantial, they are always and forever. Our core values are R.I.S.E. Respect, Integrity, Service, and Excellence. Pasek Security Company™ a DH Pace Company, Inc. in S. Boston, MA is seeking to hire a Systems Integration Technician. You will be responsible for the installation and service of commercial electronic security systems, including access control, CCTV, intrusion detection, intercom, emergency phone, and parking revenue systems. If you have security or access control experience, please apply today for consideration! Job Responsibilities: • · Installation of access control, CCTV, intrusion detection, intercom, emergency phone, and parking revenue systems, • · Interact with customers, vendors, and other contractors on-site to properly coordinate successful installations, • · Maintain safe working environment and upon completion of day's work ensure job site is clean and clear of debris, • · Maintain inventory on truck and have knowledge and understanding of all parts, part numbers, and part descriptions, • · Ensure that all job tickets and time sheets are completed, signed, and submitted accurately and timely, • · High school diploma/GED (preferred), • · Prior experience in systems integration, access control, or security field required, • · Strong troubleshooting skills required, • · Ability to safely lift 100 pounds, • · Ability to work at heights and use a ladder, • · Must possess valid driver's license and good driving record Our benefit offerings include: • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, and drug screen required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description Field Service Technician - Commercial Refrigeration & Kitchen Equipment Join the Joe Warren & Sons Co. (JWS) family, a dynamic force in commercial refrigeration and food equipment services across New England. Since 1991, our family-led business anchored in Norwood, MA, has combined an industry-leading reputation for quality service with a profound respect for our community and team. As we chart an exhilarating growth phase, we're eager to bring aboard a Commercial Refrigeration Field Service Technician. Total Compensation: $60,000.00 - $115,000.00+ per year based on experience Field Service Technician Responsibilities • Travel to client sites to diagnose and repair refrigeration and ice machine equipment., • Ensure clear and accurate paperwork for all customer services., • Coordinate with the Parts Department for precise parts identification and ordering., • Ensure timely and professional installation of ordered parts., • Keep the service truck tidy and maintain an organized inventory of parts and tools., • Engage with manufacturers, sales reps, dealers, and customers., • Identify service challenges, gather relevant data, and formulate effective solutions., • Collaborate with manufacturers for equipment diagnosis when required., • Offer top-tier service and clearly communicate service requirements to customers., • Advocate for and suggest additional JWS services to customers as appropriate., • EPA certification and a strong emphasis on safety., • Ability to climb stairs and ladders., • Adept at multitasking and adapting to varying tasks., • Emphasis on customer understanding and satisfaction., • High School diploma or GED and a valid driver’s license., • Ability to lift and carry items weighing up to 75 pounds., • Independent worker and effective team collaborator., • Proficiency in using hand tools., • Demonstrated ability to complete assignments with little to no supervision., • Previous experience in gas, electric, plumbing, and/or steam repairs is an asset., • Minimum of 5 years of experience in refrigeration/ice machine and/or similar commercial kitchen equipment repair or a related field., • Strong organizational skills and a proactive, team-oriented mindset., • Physical capability to undertake tasks requiring walking, standing, driving, sitting, squatting, kneeling, reaching, bending, twisting, and turning for up to 8 hours.Field Service Technician Benefits:, • Attractive compensation package with periodic reviews, bonuses, and increments, • Very competitive 401k with a 4% Safe Harbor Match, • Comprehensive Health Benefits: Medical, Dental (FREE), Vision, and HSA, • Ready-to-Go Company Vehicles: Equipped with all necessary tools and equipment., • Flexible On-call with Overtime: Infrequent on-call schedules and plentiful OT opportunities with incentive pay., • Career Growth: Paid training, tuition assistance, and numerous advancement opportunities., • Mentoring Incentives: Earn extra by mentoring through our Experienced Training Program., • Life & Disability Insurance for your peace of mind, • Benefit from our company-wide Bonus incentive program with quarterly payouts, • Enjoy 9 company-funded holidays along with generous PTO, • Robust career progression opportunities, • Referral bonuses for expanding the JWS family Powered by JazzHR ucfkGp5pYt

Job Description Maloney Properties – Voted “Best Place to Work” by our employees for 10 years! Join our hard-working motivated team! Our reputation for customer service and quality workmanship is the best in the industry. About Us: Established in 1981, Maloney Properties LLC is a successful women-owned business. Our services include property management, real estate development, hospitality management, sales/marketing, and construction management services. We manage more than 100 housing communities with more than 10,000 units throughout the New England area. We attribute our success to the effective working partnerships we have created with both clients and staff. Maloney Properties has developed a unique culture and work environment that is a significant factor in our success and enables us to attract and retain the best talent and finest professionals in the industry. As a result, Maloney Properties has a high employee retention rate with an average employee tenure of more than 10 years. We are a company with a human focus and feel passionately and genuinely that our employees are our greatest asset. We are dedicated to teamwork, staff development and training. We have created a community within our company; we set clear goals and work together to achieve them. Maloney Properties is an Equal Opportunity Employer. Your Responsibilities: We are seeking a Maintenance Technician to join our team in Dorchester, MA. This is a full-time opportunity in the property maintenance field at a multi-site portfolio of residential properties. You will join a team of maintenance professionals whose responsibilities include: • Performing in-unit repairs, preventative maintenance, and unit turnovers., • Preparing properties for upcoming inspections., • Completing work orders, including light electrical, plumbing, HVAC, and carpentry work., • Providing access to contractors and inspectors as needed. Your Qualifications: We are looking for someone with excellent communication skills and a strong customer service philosophy. • Knowledge of general apartment repair and experience in carpentry, plumbing, electrical, and HVAC work is required., • Experience with Yardi or other work order systems is preferred. We offer highly competitive pay and a comprehensive benefits package including great health benefits, 13 paid holidays, vacation time, 401k match, life and disability insurance, employee assistance program, an extra paid day off during your birthday month, and more! You will love our family-friendly workplace and healthy work-life balance at Maloney. We also offer training programs and opportunities that lead to employee advancement and promotions. If you are interested in furthering your skills and building your career, this is a great opportunity for you!

Job Description Maintenance Technician, Union A family-owned and privately held property management company, First Realty Management has more than 70 years of experience with the industry knowledge to match. We combine the resources of a large company with the personal touch and attention to detail of a small, local firm. At the core of it all, our talented employees make us stand out above the rest. While we perform as a top-tier property management company, we strongly emphasize our close-knit, family-owned foundation. Professional growth is encouraged through a commitment to educational advancement and opportunities to learn from industry thought leaders. We create a sought-after community atmosphere by recognizing and celebrating those who go above and beyond. And above all else – we always put our team members first. First Realty Management Corp, a leading area property management firm is seeking an experienced Maintenance Technician to serve multiple apartments in the Boston area. We are seeking an individual who can work well independently when needed and is skilled in electrical, plumbing, carpentry, HVAC, boilers, and general maintenance work. Requirements • This individual must have the ability to adapt to changing priorities., • Good communication skills are necessary., • The individual should be service-minded and take pride in work., • Shares in on-call rotation., • Having your own hand tools is very helpful., • Prior experience in apartment maintenance is also helpful., • Reliable transportation, willingness to travel when needed, and a valid driver's license are required., • Sign-on Bonus., • Paid Vacation, Holidays, PTO/Personal leave., • 401(k) plan., • Health, Vision, Dental Insurance., • Life Insurance, Short-& Long-Term Disability., • Flex spending accounts & Transportation expense accounts.

Job DescriptionCompany Description TOMRA North America, is a top International Reverse Vending and Recycling Company. At Tomra transformation is at the heart of everything we do. We transform ideas & technology to create intelligent and pioneering tools to support a sustainable future. Job Description TOMRA North America, a top International Reverse Vending and Recycling Company is looking for a Service Technician in Massachusetts. Company Vehicle is provided Hours: 7:00am – 3:30pm Monday through Saturday (alternating weekend days with a comp day during the week) Job Type: Full-time Essential Duties and Responsibilities: • Perform pre-installation site surveys at customer locations and create related documents for management review, • Install, calibrate and test reverse vending machines, • Trouble shoot, diagnose and resolve equipment malfunctions, • Train customers on the operation and maintenance of RVM's #indsrvne Qualifications • 3+ years experience in electro-mechanical field service role, • Clean and valid driver's license with the ability to obtain a DOT Medical card, • High school diploma of GED, • Ability to use hand and power tools, • Experience using a multi-meter, • Capability to use both a lap top computer and a smart phone along related software and apps, • Clear communication skills both verbal and in writing, • Min. education High School degree or equivalent required; 2 Year Degree or Certification Preferred, • Min. experience 1-2 years' experience in electromechanical field service or equivalent Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionDescription: Join Our Team as a Field Service Technician at DOC Services! Are you a skilled technician looking to advance your career with a leading company that values your hard work and expertise? DOC Services Inc. is the perfect place for you! With over 35 years of experience and a reputation for excellence, we are committed to providing reliable maintenance solutions that keep our clients’ businesses running smoothly. Why DOC Services Inc.? • Year-Round Stability: Enjoy consistent work., • Growth and Development: Continuous training and opportunities to enhance your skills and advance your career., • Comprehensive Support: Be part of a company that sets you up for success, with robust resources and a dedicated support system., • Flexible Scheduling: Achieve work-life balance with schedules designed to fit your lifestyle., • Diagnosing and repairing mechanical and electrical failures on electromechanical equipment., • Performing preventive maintenance while adhering to OSHA safety standards., • Skillfully using hand and power tools for equipment assembly, disassembly, and repair., • Promptly responding to service calls to keep our clients’ equipment operating seamlessly., • A high school diploma or GED., • 2+ years of equipment repair experience or equivalent training., • Strong mechanical and electrical skills, with the ability to read schematics., • A valid driver's license with a clean driving record., • Excellent interpersonal skills and a professional attitude., • The ability to work independently, pay close attention to detail, and remain organized., • Tools of the Trade: Company vehicle, phone, laptop, and gas card provided., • Financial Security: Competitive pay and a 401(k) plan with company match., • Health and Wellness: Comprehensive medical, dental, and vision insurance options., • Career Advancement: Continuous training and professional development opportunities. DOC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment based on race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, disability, or any other federal, state, or local protected class. Requirements:

Job Description EXPERIENCED FIELD TECHNICIANS NEEDED IN BOSTON, MA Cennox is seeking an enthusiastic Field Technician to join our expanding Field Services division. We are looking for passionate, experienced field professionals that are ready to work in an environment that allows you to grow as Cennox grows...Those with exceptional customer service and who can thrive in a dynamic team culture should apply. Also, willing to be cross trained to support our other lines of business, banking and retail. WHY SHOULD YOU JOIN THE CENNOX FAMILY? • Competitive Pay & Paid Training, • Company Vehicle, • Total Benefits Package including Retirement, Health, Dental, Vision, Life Insurance & more, • Paid Holidays, Vacation & Sick Package, • Company-provided tools, uniforms, and Android smartphone, • Flexible work schedule, paid training, and opportunity for travel In this role, you will service our customers by performing preventative maintenance, installation, determining issues with products, and training customers on the proper use of financial equipment throughout Boston and surrounding areas. This position offers the chance to become part of a rapidly growing company. WHAT YOU'LL BRING: • 3+ years experience with low voltage electronics, mechanical systems, and computer experience; Safe or ATM Technical experience is a plus, • Electro-mechanical skills a must, ability to use basic hand tools including but not limited to multi-meter, voltmeter, volt-ohm meter, • Working knowledge of Microsoft Office (Word, Outlook, Excel), • Experience with mapping and routing applications such as MapPoint or Google Maps, • Ability to learn through telephone training, • Great communication/customer service skills and ability to interpret/execute written instructions, • Valid driver's license with a driving record in good standing and a reliable/insured vehicle, • Ability to communicate and provide excellent customer service, • Ability to lift/move 50 or more pounds, stand, climb, bend, stoop, and reach freely, • Ability to work both indoors and outside in all-weather and sit/drive for extensive daily travel, • Good hand/eye coordination and sharp eyesight Notice on Use of AI in Hiring As part of our commitment to fair and efficient hiring practices, Cennox uses JazzHR’s TalentFit AI tool to assist in evaluating candidate applications. This technology helps us match applicants to job requirements based on qualifications and experience. All hiring decisions are ultimately made by our human recruiting team. If you have questions or concerns about this process, please let us know during your application. E-Verify Cennox participates in the E-Verify program to confirm the identity and employment eligibility of all new employees. For more information, please visit . Powered by JazzHR 7daKuMJvb9