Shop supervisor jobs in New York, New York - Page 2Create job alerts

Job DescriptionThis position will perform routine and non-routine maintenance, diagnostic and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. Performs work under minimal supervision. Handles more complex problems and can resolve independently. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I and/or Technician II. Also, may act as a Shift Foreman and may receive a shift premium.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$28.00/hrMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on both basic and complex maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under minimal supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers., • Diagnoses and performs accurately all phases of vehicle and equipment repair under minimal supervision. May perform diagnostic tests utilizing a computer and manufacturer's software to determine mechanical defects., • Lead preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove, overhaul and reinstallation of mechanical components with minimal Tech in Charge supervision, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Leads road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Other responsibilities as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program (expected to have 6 ASE within 6 months of hire) Minimum Experience or Skills Required • Advanced mechanical aptitude and 5 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Advanced problem-solving ability, • Advanced computer skills, • Comfortable using hand tools, • Excellent customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job Description Reporting to the Maintenance Supervisor or other Manager, the HVAC Mechanic “A” will lead the daily operation of the HVAC/R shop at the College. This position will be responsible for the ongoing temperature control and comfort of the heating and cooling systems at the College to support academic, lab, administrative, and specialized HVAC/R systems. POSITION SUMMARY Responsibilities include, but are not limited to: • Installs, operates, maintains, and repairs complex HVAC/R systems including water and oil pumps, water analysis and chemical treatment systems, air compressors, pneumatic, electrical and mechanical controls, refrigeration, heating, cooling and ventilating equipment, filters, condensers, cooling towers, evaporators, and heat exchangers., • Responds to HVAC system complaints, performs troubleshooting of systems and provides feedback to Supervisors and Managers on progress., • Plans and performs preventative maintenance tasks for College HVAC/R systems to optimize system performance and energy efficiency., • Installs electric power, piping, controls and duct work to replace, maintain or to install new equipment., • Maintains logs, checklists, and prepares written reports to Supervisor, as appropriate., • Enters information into the College’s Computerized Maintenance Management System (CMMS) to document all work, parts used, system conditions, hours worked, and leverages system data., • Ensures compliance with all safety standards, buildings codes, and environmental regulations., • Leverages Building Automation and Building Management Systems (BAS/BMS) to prioritize, document, and improve system performance and facility comfort., • Monitor and oversee College and contractor staff, as needed., • Attends training sessions and meetings to stay current on all trade, College, and regulatory requirements, • Maintains the cleanliness and orderliness of department spaces., • Prepares list of materials required to maintain inventory and complete projects., • Must respond to emergencies and maintenance tasks, as required, which may include working off-hours or holidays., • Reports to the College during closures and assists with snow and ice clearing operations, as needed., • Performs any other duties or task as may be assigned. SPECIAL SKILLS AND QUALIFICATIONS Education: High School diploma or equivalent required. Vocational School education or an appropriate apprenticeship preferred. Completion of a Journeyman level training program in HVAC/R or associate’s degree in HVAC/R Experience: • Minimum of Six years’ experience maintaining and repairing sophisticated commercial and industrial air conditioning systems including electric/pneumatic controls, fume hoods, high capacity centrifugal refrigeration equipment and roof top units., • Must be EPA Certified Universal Technician in accordance with Section 608 to handle CFCs, HCFCs, and HFCs, • Must have NJ Blue Seal Refrigeration, • Additional state or local licenses and certifications is a plus, • Experience working in an inclusive, collaborative, and respectful team setting., • Embodies a “culture of safety” in all tasks and recommends safety improvements. Other: Must have a valid Driver’s License. Must have or obtain a Certified Pool Operator certificate within 6 months of hire. Knowledge, Skills and Abilities: • Demonstrates knowledge of facility operations, maintenance, and industry standards., • Knowledge of power and hand tools, chemical handing procedures, and associated safety protocols., • Knowledge of computerized building automation systems and building managements systems., • Proficiency with Microsoft Office Suite and Google business suite experience preferred., • Provides excellent customer service to students, faculty, and staff., • Excellent organizational, prioritization, time management, and communication skills., • Experience with computerized maintenance management systems (CMMS) preferred., • Interprets and understands blueprints, schematics, wiring diagrams, and layouts., • Reviews projects and capital improvement scopes of work to identify opportunities for improvement., • Brazing, soldering, and industry standard pipe joining techniques. Physical requirements: • Prolonged periods walking, standing, bending, stretching, pushing, pulling, climbing ladders, or kneeling on uneven surfaces, • Physically able to operate powered equipment and tools, • Must be able to lift up to 50 pounds at a time, • Able to work in unconditioned, noisy, dimly light, confined, and odorous spaces, including the ability to work in variable and sometimes extreme weather conditions such as rain, snow, storms, heat, cold, and other weather indigenous to the area, • Must be able to wear personal protective equipment (PPE) for prolonged periods of time, • Must be able to climb a ladder and work at heights for extended periods of time Salary and Benefits • Annual Salary is $65,000-$80,000, • NJ Educator's Health Plan with Free Dental and Vision. NJ State Pension Plan., • 13 vacation days, 15 sick days, 4 personal days, 2 floating holidays, 3 Partial Sick Days, all designated holidays and 5 non-designated holidays a year. Bergen Community College provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionThis position will perform routine and non-routine maintenance, diagnostic and repair work on vehicles (buses, vans etc.) which adheres to First Student standards. Performs work under minimal supervision. Handles more complex problems and can resolve independently. All work is performed with a commitment to safety. May mentor or provide informal guidance to other Technicians in the shop. Also, may act as a Shift Foreman and may receive a shift premium. In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$36.07/hr based on CBAMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on both basic and complex maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under minimal supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers., • Diagnoses and performs accurately all phases of vehicle and equipment repair under minimal supervision. May perform diagnostic tests utilizing a computer and manufacturer's software to determine mechanical defects., • Lead preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove, overhaul and reinstallation of mechanical components with minimal Tech in Charge supervision, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Leads road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Other responsibilities as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program (expected to have 6 ASE within 6 months of hire) Minimum Experience or Skills Required • Advanced mechanical aptitude and 5 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Advanced problem-solving ability, • Advanced computer skills, • Comfortable using hand tools, • Excellent customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job DescriptionThis position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$26.00/hr per union contractMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers, • Assist Tech III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision., • Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision., • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Minimum Experience or Skills Required • Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Intermediate problem-solving ability, • Intermediate computer skills, • Comfortable using hand tools, • Strong customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job DescriptionThis position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I. In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$25.00/hr based on CBAMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers, • Assist Tech III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision., • Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision., • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Minimum Experience or Skills Required • Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Intermediate problem-solving ability, • Intermediate computer skills, • Comfortable using hand tools, • Strong customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job Description Job Description As an Automotive Technician, you will play a critical role in ensuring the safety, reliability, and performance of vehicles. Your primary objective will be to diagnose, repair, and maintain automotive systems using advanced diagnostic tools and techniques. You will work closely with customers and team members to provide accurate assessments and effective solutions that meet dealership and manufacturer standards. This role demands a strong commitment to quality workmanship, attention to detail, and adherence to safety protocols. Ultimately, your expertise will contribute to vehicle performance, customer satisfaction and the overall success of the automotive service operation. Responsibilities: • Perform work as outlined on Repair Orders with efficiency and accuracy, in accordance with dealership and manufacturer standards, • Diagnose cause of most malfunctions and perform repairs based on customer concern, • Communicate with Parts department to obtain needed parts, • Save and tag parts of the job if under warranty or if requested by the customer, • Examine assigned vehicle to determine if further safety or service work is required or recommended, • Communicate with Service Advisors immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time, • Document all work performed and recommended on Repair Orders, • Determine proper labor times/quotes based on industry standards or repair manual labor times, • Road test vehicles when required or refer to the test technician, • Participate in manufacturer-sponsored training programs, school, and events, • Keep abreast of manufacturer technical bulletins, • Supervise work of any apprentice technicians as assigned, • Report machinery defects or malfunctions to supervisor, • Ensure that customers' cars are kept clean. Notify service advisor immediately of anything that has happened to change the appearance or condition of the vehicle, • Keep shop area neat and clean, • Maintain and is accountable for all dealership-owned tools and manuals. Return them to the proper place and in the same condition as they were received, • Understand, keeps abreast of, and comply with federal, state, and local regulations such as hazardous waste disposal, OSHA Right-to-Know, etc., • Operate all tools and equipment in a safe manner, • Report any safety issues immediately to management, • Be punctual and a positive team player, • Other tasks as assigned Skills: The required skills enable the Technician to accurately diagnose and repair complex vehicle issues, ensuring efficient and effective service delivery. Proficiency with diagnostic tools and software is essential for identifying problems quickly and minimizing vehicle downtime. Strong mechanical aptitude and problem-solving skills allow the Technician to perform repairs that meet or exceed manufacturer standards. Excellent communication skills are used daily to interact with customers and team members, ensuring clarity and fostering trust. Qualifications: • High school diploma or equivalent, • Completion of a formal automotive technician training program or apprenticeship, • NJ Inspector's License, • Proven experience in diagnosing and repairing a variety of vehicle makes and models, • GM certified, • Ability to use diagnostic tools and equipment proficiently, • Experience working with hybrid and electric vehicles, • Familiarity with manufacturer-specific diagnostic software and repair procedures, • Strong customer service skills and the ability to explain technical information clearly Benefits: • Generous compensation based on performance/experience, • Benefits available – Medical, Dental, Vision, Life, 401(k), Paid Time Off, • Positive and family-friendly atmosphere, • Paid training and advancement opportunities

Job DescriptionReports To: Dining Room Manager / Supervisor; Banquet & Event Manager / Supervisor. Role Purpose: Echo Lake Country Club seeks polished, service-driven Professional Servers to deliver exceptional dining and event experiences for our Members and guests. Servers are ambassadors of the Club and play a critical role in Member recognition, personalized service, and maintaining the highest hospitality standards across all dining outlets and events. Professional Servers are expected to lead by example, actively assist in training and mentoring support staff, and demonstrate strong food, wine, and beverage knowledge. This role requires attention to detail, confident communication, and a proactive approach to anticipating and fulfilling Member needs. Key Responsibilities: • Deliver gracious, personalized service with a strong focus on Member recognition, preferences, and special requests., • Greet Members and guests professionally, using proper forms of address and demonstrating familiarity whenever possible., • Maintain in-depth knowledge of all food and beverage menus, including seasonal offerings, wine lists, cocktails, and specials., • Confidently recommend and upsell food and beverage pairings to enhance the Member experience., • Serve as a leader on the floor, assisting in the training, coaching, and development of support staff (runners, bussers, hosts, etc.), • Execute service according to Echo Lake standards, including table maintenance, pacing, and presentation., • Support and actively participate in banquet and event service, including set-up, execution, and breakdown., • Ensure cleanliness, organization, and proper presentation of dining rooms, banquet spaces, and service areas., • Proactively identify and resolve Member concerns, escalating issues to management as needed., • Communicate Member feedback, requests, and service opportunities to management., • Uphold sanitation, safety, and service standards at all times., • Attend all required staff meetings, training sessions, and tastings., • Perform all additional duties as assigned in support of Club operations. Daily Responsibilities: • Prepare dining rooms and banquet spaces for service., • Coordinate with kitchen, bar, and service teams to ensure timely and accurate service. Verify order accuracy prior to service., • Deliver food and beverages using proper service techniques and tray service., • Maintain table settings, bread service, water service, and overall dining room order., • Actively bus, stage, and reset tables throughout service with an all-hands mentality., • Assist with banquet and private event service as scheduled., • Relay Member feedback and special requests to management., • Maintain a polished appearance and professional demeanor at all times. Qualifications & Skills: • Minimum 3 years of experience as a Professional Server in fine dining or upscale hospitality., • Strong working knowledge of food, wine, spirits, and service etiquette., • Demonstrated ability to recognize Members and personalize service., • Experience assisting with training and mentoring front-of-house support staff., • Excellent communication, organizational, and multitasking skills., • Proven ability to upsell and manage per-member check averages., • POS proficiency and strong basic math skills., • Ability to work efficiently while maintaining composure and professionalism., • Availability to work evenings, weekends, holidays, and varied shifts., • Background check and verifiable references required. Working Conditions: • Prolonged standing, walking, lifting, bending, and stretching required., • Ability to stand for up to 10 hours per shift., • Ability to lift and carry up to 35 lbs., • Open availability required. Compensation: • Hourly Wage: $18–$23, based on experience. Benefits: • Medical, dental, and vision insurance., • Employer-paid life insurance 401(k) with employer match., • Flexible Spending Account (FSA) Dependent Care Account Health Reimbursement Arrangement (HRA)., • Complimentary employee meals during scheduled shifts., • Club privileges where applicable., • Employee discounts in the Pro Shop., • Paid Time Off (PTO).

Job Description Position Summary The City Hall Older Adult Center (CHOAC) is one of the largest older adult centers in New York City. It provides nutritious meals, vital services, and engaging activities to older adults from across the city. Recognized as a model for delivering high-quality, high-volume programming that is both culturally and linguistically responsive, CHOAC holds a prominent public profile and strong community visibility. We are currently seeking a dedicated Assistant Cook to join our food service team. The Assistant Cook will support Head Cook and other kitchen staff in preparing and serving congregate meals that meet the standards set by the NYC Department for the Aging (DFTA) and the Department of Health. This role plays a vital part in ensuring the health, safety, and satisfaction of our participants through high-quality meal service. Responsibilities: • Assist with daily food preparation, cooking, and packaging of grab-and-go meals for congregate services, • Transport, pack, and organize food supplies and related items to ensure efficient kitchen operations, • Participate in menu planning to support culturally appropriate and nutritious meal offerings, • Prepare and submit daily food cost reports to support budget tracking and compliance, • Help maintain accurate inventory and ensure proper storage and organization of food supplies, • Clean and sanitize all kitchen appliances, equipment, and storage areas; maintain cleanliness of the dining room and kitchen, including cupboards, shelves, racks, work surfaces, cooking equipment, dishes, and utensils, etc., • Assume full responsibility for meal preparation and service in the absence of the Head Cook, • Assist in planning food purchases from designated vendors and/or shop at local markets as needed, • Ensure all food service activities comply with NYC Department for the Aging (DFTA) and Department of Health (DOH) standards and regulations, • Attend staff meetings and participate in required trainings as directed by the supervisor Qualifications: • Minimum 1 year of relevant work experience, • Physical Exam and TB test required – Must be free of communicable illness, • Ability to lift up to 40 pounds and stand for long periods of time as needed, • Valid Food handler certificate protection certificate or the ability to obtain within 6 months, • Bilingual English/Asian Language preferred but not required;, • Must be able to read, write and speak some English Compensation: $20.50 per hour Hours: Monday - Friday 7:00AM to 3:00PM 35 hours per week We have a strong and vibrant work culture and offer excellent benefits including medical, dental, and vision insurance, 15 vacation days, 12 sick days, 3 personal days, and 12 paid agency-wide holidays annually. Hamilton-Madison House is an Equal Opportunity Employer

Job Description Role Summary This role supports day-to-day warehouse operations — receiving and inspecting shipments, pulling and packing orders, and maintaining accurate inventory across both bulk/pallet and case-pick/parcel work. You'll work directly in SAP B1, handle walk-in customer transactions and returns, and move between tasks and locations as the operation requires. What You'll Do ● Receive, inspect, and process incoming shipments — flagging damage, defects, or discrepancies — into inventory ● Pull, pack, and verify outbound orders in both bulk/pallet and piece-pick/parcel environments, ensuring accuracy ● Put away stock and maintain accurate bin mapping so inventory can be located reliably ● Handle walk-in customer checkout and process shipped and walk-in returns — inspect returns and flag them for restock, vendor return/credit, or write-off as a last resort ● Create GRPOs (goods receipt POs) and update barcodes and SKUs (stock keeping units) in SAP B1 ● Coordinate cross-location inventory transfers in SAP B1 and conduct cycle counts / inventory audits ● Operate pallet jacks, hand trucks, and forklifts (if certified); follow safety guidelines while standing for extended periods and lifting up to 60 lbs, including repetitive lifting for an hour or more at a stretch What Separates Strong Performers ● Tracks specifics — exact counts, SKUs, steps — rather than working from a general sense of what needs to happen ● Holds the same standard of accuracy on a bulk pallet run as on a single piece-pick order — no environment gets the shortcut ● Takes correction well, whether it comes from a supervisor or a coworker, and doesn't need to hear the same feedback twice ● Handles unglamorous, repetitive tasks without complaint and earns the team's trust over time ● Owns mistakes directly and raises process concerns rather than working around them ● Moves fluidly across tasks and locations — the versatility that leads into floor supervision or coverage-relief responsibilities as you grow in the role What You Need to Succeed Read through honestly before you apply — this role is a good fit if: ● You have a high school diploma or GED (preferred) and have worked in a warehouse setting before ● You're comfortable operating pallet jacks and hand trucks; forklift certification is a strong plus, especially for bulk/pallet work ● You're proficient with ERP (enterprise resource planning) or order management systems, preferably SAP B1 ● You can stand for extended periods and lift up to 60 lbs repeatedly, including sustained stretches with no lighter tasks to rotate to ● You have reliable transportation and can commit to being on time for every shift, without exception ● You're comfortable keeping personal phone use off the floor during your shift ● You work well without close supervision and manage your own time effectively What We Offer Competitive hourly pay ($17.00–$22.00, based on experience), medical/dental/vision insurance, paid time off, employee discounts, training & development, career advancement opportunities, and flexible scheduling. About The Cloud Supply We're a wholesale distributor of premium smoke shop, glass, vapor, hookah, and other alternative products. Founded in 2011 and headquartered in Linden, New Jersey, we provide service and authentic, high-quality products to retailers and wholesalers.

Starbucks is seeking Baristas / Customer Service Representatives to prepare beverages, assist customers, and support daily store operations in a fast-paced coffee shop environment. Baristas are responsible for taking customer orders, operating the register, preparing coffee and espresso drinks, making cold beverages and food items, maintaining a clean work area, restocking supplies, and providing friendly customer service. Employees must follow Starbucks drink recipes, food safety guidelines, and customer service standards while working efficiently during busy periods. This position typically pays $15 to $20 per hour, and employees may also receive tips, overtime pay, holiday pay, and shift differential pay for early morning or holiday shifts. Baristas are responsible for preparing drinks to company standards, operating espresso machines, handling cash and card transactions, cleaning equipment, stocking cups and ingredients, assisting with drive-thru orders where applicable, and maintaining store cleanliness. Employees must work as part of a team to ensure orders are prepared quickly and accurately. Full-time and part-time employees may be eligible for benefits including health, dental, and vision insurance for eligible employees, 401(k) with company match, paid time off, Starbucks partner discounts, free drinks during shifts, tuition assistance programs, and opportunities for advancement into Shift Supervisor or Store Manager roles. Starbucks also offers tip sharing and potential performance-based raises.

Job DescriptionFleet Maintenance Manager – Commercial Transit (Queens, NY) Location: Queens, New York (On-Site) Schedule: Full-Time | Thursday through Monday (Weekends Required) Days Off: Tuesday & Wednesday Reporting To: National Fleet Manager About Us We are the operational force behind TopView Sightseeing and Tea Around Town (TAT), running a premier, high-volume commercial passenger motorcoach and double-decker fleet across New York City. Operating a dynamic, 24/7 transportation network, we are building a best-in-class fleet maintenance culture focused on safety, reliability, and precision execution. Backed by national corporate support and modern diagnostic infrastructure, our shop maintains the assets that power some of the most recognized luxury and tourism experiences in the NYC market. Job Description We are seeking a highly disciplined, hands-on Fleet Maintenance Manager to command daily maintenance operations for our commercial passenger fleet based in Queens, NY. This is not a passive desk job; it is a high-impact, execution-focused role requiring sharp leadership, technical vehicle fluency, and an unwavering focus on fleet uptime. Reporting directly to the National Fleet Manager, you will lead our local technician teams, strategically prioritize mechanical throughput, and guarantee that our assets meet absolute safety, compliance, and brand standards before rolling out onto the streets of New York City. Core Responsibilities • Shop Throughput & Fleet Uptime: Direct all day-to-day operations of the Queens maintenance facility to ensure maximum fleet readiness and zero missed departures., • Personnel Leadership & Accountability: Supervise, schedule, and coach a team of diesel technicians. Hold frontline staff strictly accountable to efficiency metrics, repair safety, and labor hour targets., • Real-Time Triaging: Dynamically assign and prioritize preventative maintenance (PM), diagnostics, heavy-duty electrical troubleshooting, and emergency work orders based on live operational demand., • DVIR & Compliance Ownership: Review, action, and close out all driver-reported DVIRs (Driver Vehicle Inspection Reports) daily to guarantee mechanical safety., • Data & Work Order Management: Oversee the complete lifecycle of all digital work orders, tracking labor hours, parts allocation, technician productivity, and asset repair histories in real time., • Live Driver Support: Act as the primary point of contact for drivers experiencing on-road issues; provide clear, composed troubleshooting support via phone and coordinate rapid-response roadside assistance or towing vendors if required., • Shop Administration & Compliance: Manage local shop scheduling, employee timekeeping, tool/facility maintenance compliance, and payroll-related reporting.Job QualificationsThe Non-Negotiable, • The Grid-Lock Schedule: Absolute, uncompromised commitment to a permanent Thursday through Monday shift. This is a high-volume, peak-weekend operation. Complete dependability and responsiveness during these specific days are absolute conditions of employment., • The 50+ Hour Requirement: This is a senior operational leadership role, not a punch-the-clock desk job. Successfully managing fleet throughput, DOT compliance, and a 24/7 transit network requires a minimum commitment of 50 or more hours per week.Professional Experience & Leadership, • Fleet Management Experience: 5+ years of progressive experience as a Fleet Maintenance Manager, Shop Supervisor, Lead Inspector, or senior-level heavy-duty shop foreman., • Personnel Command: Proven track record of managing, scheduling, coaching, and holding a crew of technicians strictly accountable to repair safety, quality, and workflow productivity metrics., • Technical Foundation: Strong preference for candidates who have a proven background as a heavy-duty diesel technician or shop foreman prior to moving into management. Must possess the ability to read diagnostic data, audit repair quality, and confidently troubleshoot mechanical issues over the phone with drivers., • Tech-Savvy Operations: Direct proficiency utilizing digital Fleet Management Systems (FMS), creating/tracking electronic work orders, managing parts inventory, and navigating modern shop productivity dashboards.Highly Preferred (The Competitive Edge), • Passenger Transit DNA: Prior experience managing maintenance operations specifically for motorcoaches, commercial transit buses, luxury charters, or shuttle fleets. (Strong background with Van Hool architectures is a major plus)., • NYS DOT Passenger Bus Regulatory Fluency: Deep familiarity with NYS Department of Transportation (NYSDOT) passenger bus inspection regulations, safety criteria, and out-of-service mandates. Experience preparing an over-the-road passenger fleet to pass semi-annual DOT garage inspections is highly valued., • Component Mastery: Strong diagnostic and mechanical familiarity with Cummins ISM / ISX / X15 engines, heavy-duty exhaust aftertreatment systems (DPF/SCR), and ZF EcoLife / AS Tronic transmissions., • Commercial Driving Foundations: An active or previously held CDL (Class A or B) with a Passenger Endorsement to ensure a driver’s perspective and safely assist with asset spotting/positioning within the yard.Working Conditions & Physical Requirements, • Ability to work comfortably in a fast-paced, semi-outdoor shop environment subject to seasonal New York weather variations., • Ability to physically inspect vehicles, including standing, bending, and occasionally assisting with asset spotting within the yard.Compensation & Benefits, • Compensation Range: $115,000 - $135,000 per year (commensurate with senior-level leadership and asset management experience)., • Bonus Structure:

Job Description SCENIC CARPENTER Special Event Fabrication company seeks over hire carpenters to work as needed on various projects. Secaucus, NJ based shop fully equipped. Working under the supervision of the Head of Carpentry Candidates for the Scenic Carpenter position should possess solid carpentry skills, a keen eye for detail, and the ability to interpret artistic and technical drawings. Problem-solving skills and adaptability are crucial, as the work often requires on-the-spot adjustments and creative solutions. Experience with power tools and construction techniques specific to scenic production is highly valued. Being well versed in using a wide range of equipment, carpentry power tools, skills and materials to construct and finish a variety of large- and small-scale scenic items to the highest of standards to tight timescales. ESSENTIAL – REQUIRED SKILLS · Physically capable of undertaking the requirements of the position including lifting, bending, stretching and reaching for long periods of time · Able to work at height on ladders and access platforms · Ability to read and understand CAD Drawings · Ability to read and understand Build Drawings · Ability to work from scale drawings, models, plans, sketches, verbal ideas and references · Ability to create cut lists, material needs, etc. to complete a project · Excellent practical woodwork and resistant material skills · Adhere to safety standards and proper handling of equipment and gear · Ability to organize/prioritize and complete multiple tasks simultaneously on the job · Effective time management skills and the ability to work as part of a team in a busy workshop environment GENERAL SHOP DUTIES · SUPPORT WORK-Keeping shop clean. If not currently assigned a task, cleaning and putting tools away · Accept all other duties as assigned by immediate supervisor/manager -Hourly Position with possibility of overtime when necessary \nCompany Description Founded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. KadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs. *Be sure your resume file is named with your last name and first name. *Your resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at. Founded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. \r\nKadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs.\r\nBe sure your resume file is named with your last name and first name.\r\nYour resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at.

Job Description Join the excitement of a limited-time ANIME and MANGA pop-up shop. We're looking for an energetic Retail Store Team Leader who enjoys engaging with customers, supporting store operations, and helping lead a team in a fun, high-energy retail environment. Whether you're a fan of ANIME and MANGA or simply love unique retail experiences and pop-up events, this is a great opportunity to be part of something special. Responsibilities • Greet and assist customers with product recommendations and purchases, • Operate POS system and handle cash/card transactions accurately, • Restock merchandise and maintain organized, visually appealing displays, • Keep the store clean, organized, and welcoming, • Assist in leading, coaching, and supervising a team of Sales Associates to ensure excellent customer service and store operations, • Support scheduling, task delegation, and day-to-day team coordination as directed by management, • Follow store policies and supervisor direction, • Report any issues, concerns, or incidents promptly Requirements • Previous retail, customer service, or sales experience required, • Prior experience as a Team Lead, Shift Lead, Key Holder, Supervisor, or in a similar leadership role preferred, • Demonstrated ability to lead, motivate, and support a team in a fast-paced retail environment, • Friendly, outgoing, and dependable with a positive attitude, • Strong communication, interpersonal, and problem-solving skills, • Ability to multitask and remain on your feet for extended periods, • Team player with respect for a diverse customer base, • Interest in anime, manga, or pop culture is a plus (not required), • Japanese language skills are a plus, • Flexible availability, including evenings, weekends, and holidays

Job Description Seeking entry level welder to learn and grow. Reports to: Welding supervisor & Manager Responsibilities: cleaning, cutting, brushing, grinding, tacking, fitting, welding, using MIG & Stick Minimum Educational Qualifications High school Diploma /GED Minimum Previous Experience 1 year experience in shop setting

Job Description Location Brooklyn 11236 Schedule Monday-Thursday 3pm-11:30pm | Part-time Evening/PM shift | 32-hours Essential Job Functions with a disability to perform the essential duties unless this causes undue hardship to the agency.) DSP provide observations, evaluations, and reports to other team members to ensure and/or record an individual’s progress toward treatment/habilitation goals. In accordance with habilitative plans, they guide and teach individuals to develop skills required for a more independent lifestyle. Incumbents may take a lead role in one or more of the following duties within a work site. Duties may be performed in several or all of the following areas: Personal Care • Teaches and reinforces accepted infection control and personal grooming techniques; assists in bathing, dental care, hair and nail care, personal hygiene, toileting, incontinence care, menstrual care, and grooming routines as necessary., • Teaches and assists individuals in dressing, clothing selection, storage, laundering and repair of clothing and accessories; helps them to shop for clothing., • Teaches and assists in proper use and care of shavers and razors, eyeglasses, hearing aids, prostheses as prescribed by appropriate medical practitioner., • Administers and teaches individuals first aid treatments; administers cardiopulmonary resuscitation techniques and performs other health-related techniques as required., • Takes, records, reports temperatures, blood pressures, pulse rate, weight, and other significant symptoms/health-related occurrences; aids developmentally disabled individuals in understanding, recording, and reporting such factors., • Maintains confidentiality of information., • Reports unusual incidents and physical or behavioral symptoms promptly and accurately to the supervisor., • Applies valid and accepted limits for inappropriate behavior and helps control and restrain individuals with challenging behaviors in their care., • Administers prescribed medications and treatments; teaches, observes, reports problems and progress in self-administration of medications programs; assists individuals in achieving more independence in administration of medications; teaches use of skin care lotions, topical ointments, eye and ear drops and assists in their use as needed., • Accompanies individuals to medical, dental, and other health-related appointments; delivers prescriptions to pharmacy, takes medication to home site and logs same; and instructs and observes individuals in use of those substances. Food Preparation, Mealtimes • Assists individuals in eating who cannot feed themselves independently., • Teaches individuals to eat in a family-style setting; models and teaches mealtime socialization skills., • Teaches and assists individuals to plan, shop, store, prepare and serve meals using currently accepted nutritional standards; and to clean kitchen and dining areas, and dispose of leftover food safely. Maintaining the Environment Under the direction of the appropriate level supervisor, the DSP performs various tasks and duties to assure that the living environment is properly maintained and kept in a clean, neat and orderly condition. • Performs/teaches developmentally disabled individuals routine housekeeping duties such as dusting, washing floors and walls, cleaning bathrooms, and vacuuming rugs., • Assists developmentally disabled individuals in bed making., • Follows safety procedures in living unit by mopping up spills, reporting unsafe conditions, teaches and reinforces fire safety procedures. Checks to see that fire exits are clear, night-lights and exit signs on, windows locked, etc., • Stores supplies and assures that storage areas are kept in a neat and orderly condition., • Responsible for storage and replacement of linens., • May assist in various household inventories., • Performs/teaches minor and routine maintenance tasks such as changing light bulbs, fuses, replacement of faucet washers; and obtains repair services for appliances., • Performs/teaches routine removal of trash, cleaning of trash containers, ashtrays, etc., • Teaches/performs outdoor maintenance tasks and repairs of residence, yard, garden, walks; reports need for or obtains repair services for automobiles, vans, mowers, etc., • Checks fire equipment and reports any malfunction., • Conducts fire drills following the fire evacuation plan. Individual Development, Personal Interests • Teaches and reinforces use of a variety of communication skills., • Guides individuals through motor exercises designed to increase physical coordinative functions., • Teaches and reinforces principles of human growth and development, including human sexuality, as determined by each person's developmental level and program plan., • Teaches acceptable work habits, e.g., punctuality, dress and grooming, to enable individuals to develop readiness for work outside the home, or in support of individuals' habilitative goals., • Accompanies developmentally disabled individuals to community activities including worksites, cultural, religious and social events, day programs, and visits to health practitioners; aids them in developing awareness and use of community resources and in interacting with others., • Provides support for maximum community integration., • Transports/arranges for transport of individuals to community events; and aids them in development of their mobility skills., • Maintains an adequate supply of and accounting of personal clothing and possessions., • Teaches money management principles to developmentally disabled individuals; and completes/aids in completion of banking activities., • Provides an accurate accounting of all financial transactions made on behalf of individuals in their care., • Helps developmentally disabled individuals to develop/maintain positive interpersonal relationships with their peers, with others in their families, and with others in the community. Aids in explaining feelings, resolving conflicts, teaching/reinforcing acceptable means of dissipating frustration, and anger., • If pets are in the home, teaches/assists with their feeding, grooming, and care., • Teaches/supervises/participates in a variety of leisure and recreational activities, crafts projects, seasonal and permanent home decoration; assists in planning, supervising and conducting holiday celebrations selected by residents and staff., • May accompany developmentally disabled individuals to dances, camping trips, swimming, horseback riding, basketball, or other sports; assists in selection and teaching of appropriate community inclusion leisure activities., • Aids in the selection, purchase, care and use by developmentally disabled individuals of age appropriate personal belongings. Participating as Program Planning Team Member • Observes and reports on behavior and specific responses to programming, medication, interpersonal relationships, etc., • Actively participates at staff meetings by communicating observations concerning progress and reaction to various therapy programs., • At meetings, may suggest alternative programs or procedures based on experience with the individual’s habilitation plan., • Records all significant behavioral responses in prescribed format., • Participates in the development of individual program and habilitation plans., • May be asked to assist in the orientation and training of other staff., • Other duties that may be assigned Communication • As members of the Program Planning Team, DSP communicate with other direct care staff or with supervisory or clinical staff for the purpose of sharing information and obtaining direction for specific assignments. They also communicate with the developmentally disabled individuals in their care, their families and others who meet them. Essential Knowledge, Skills and Abilities • Knowledge of policies and procedures of OPWDD, as well as state and federal regulations as they apply to the care and treatment of the developmentally disabled., • Knowledge of active treatment programs as they relate to the developmentally disabled., • Currently AMAP certified or able to become certified within six months of hire., • Currently SCIP-R certified or able to become certified within six months of hire., • Currently CPR and First Aid certified or able to become certified within six months, • Ability to operate a motor vehicle safely Qualifications and Experience • High school diploma or GED or possess a Direct Support Professional (DSP) Certificate from an accredited public or private organization and the ability to provide direct services to adults with developmental disabilities. Related experience is desirable. Current clean New York State driver's license might be required depending on the shift. Preferred Education and/or Experience • Direct Care experience with people with mental and/or physical disabilities. AMAP, SCIP-R, CPR/SFA certified. #ICLother

Job Description Location Bronx 10456 Schedule Tuesday-Saturday 2pm-10:30pm Essential Job Functions with a disability to perform the essential duties unless this causes undue hardship to the agency.) DSP provide observations, evaluations, and reports to other team members to ensure and/or record an individual’s progress toward treatment/habilitation goals. In accordance with habilitative plans, they guide and teach individuals to develop skills required for a more independent lifestyle. Incumbents may take a lead role in one or more of the following duties within a work site. Duties may be performed in several or all of the following areas: Personal Care • Teaches and reinforces accepted infection control and personal grooming techniques; assists in bathing, dental care, hair and nail care, personal hygiene, toileting, incontinence care, menstrual care, and grooming routines as necessary., • Teaches and assists individuals in dressing, clothing selection, storage, laundering and repair of clothing and accessories; helps them to shop for clothing., • Teaches and assists in proper use and care of shavers and razors, eyeglasses, hearing aids, prostheses as prescribed by appropriate medical practitioner., • Administers and teaches individuals first aid treatments; administers cardiopulmonary resuscitation techniques and performs other health-related techniques as required., • Takes, records, reports temperatures, blood pressures, pulse rate, weight, and other significant symptoms/health-related occurrences; aids developmentally disabled individuals in understanding, recording, and reporting such factors., • Maintains confidentiality of information., • Reports unusual incidents and physical or behavioral symptoms promptly and accurately to the supervisor., • Applies valid and accepted limits for inappropriate behavior and helps control and restrain individuals with challenging behaviors in their care., • Administers prescribed medications and treatments; teaches, observes, reports problems and progress in self-administration of medications programs; assists individuals in achieving more independence in administration of medications; teaches use of skin care lotions, topical ointments, eye and ear drops and assists in their use as needed., • Accompanies individuals to medical, dental, and other health-related appointments; delivers prescriptions to pharmacy, takes medication to home site and logs same; and instructs and observes individuals in use of those substances. Food Preparation, Mealtimes • Assists individuals in eating who cannot feed themselves independently., • Teaches individuals to eat in a family-style setting; models and teaches mealtime socialization skills., • Teaches and assists individuals to plan, shop, store, prepare and serve meals using currently accepted nutritional standards; and to clean kitchen and dining areas, and dispose of leftover food safely. Maintaining the Environment Under the direction of the appropriate level supervisor, the DSP performs various tasks and duties to assure that the living environment is properly maintained and kept in a clean, neat and orderly condition. • Performs/teaches developmentally disabled individuals routine housekeeping duties such as dusting, washing floors and walls, cleaning bathrooms, and vacuuming rugs., • Assists developmentally disabled individuals in bed making., • Follows safety procedures in living unit by mopping up spills, reporting unsafe conditions, teaches and reinforces fire safety procedures. Checks to see that fire exits are clear, night-lights and exit signs on, windows locked, etc., • Stores supplies and assures that storage areas are kept in a neat and orderly condition., • Responsible for storage and replacement of linens., • May assist in various household inventories., • Performs/teaches minor and routine maintenance tasks such as changing light bulbs, fuses, replacement of faucet washers; and obtains repair services for appliances., • Performs/teaches routine removal of trash, cleaning of trash containers, ashtrays, etc., • Teaches/performs outdoor maintenance tasks and repairs of residence, yard, garden, walks; reports need for or obtains repair services for automobiles, vans, mowers, etc., • Checks fire equipment and reports any malfunction., • Conducts fire drills following the fire evacuation plan. Individual Development, Personal Interests • Teaches and reinforces use of a variety of communication skills., • Guides individuals through motor exercises designed to increase physical coordinative functions., • Teaches and reinforces principles of human growth and development, including human sexuality, as determined by each person's developmental level and program plan., • Teaches acceptable work habits, e.g., punctuality, dress and grooming, to enable individuals to develop readiness for work outside the home, or in support of individuals' habilitative goals., • Accompanies developmentally disabled individuals to community activities including worksites, cultural, religious and social events, day programs, and visits to health practitioners; aids them in developing awareness and use of community resources and in interacting with others., • Provides support for maximum community integration., • Transports/arranges for transport of individuals to community events; and aids them in development of their mobility skills., • Maintains an adequate supply of and accounting of personal clothing and possessions., • Teaches money management principles to developmentally disabled individuals; and completes/aids in completion of banking activities., • Provides an accurate accounting of all financial transactions made on behalf of individuals in their care., • Helps developmentally disabled individuals to develop/maintain positive interpersonal relationships with their peers, with others in their families, and with others in the community. Aids in explaining feelings, resolving conflicts, teaching/reinforcing acceptable means of dissipating frustration, and anger., • If pets are in the home, teaches/assists with their feeding, grooming, and care., • Teaches/supervises/participates in a variety of leisure and recreational activities, crafts projects, seasonal and permanent home decoration; assists in planning, supervising and conducting holiday celebrations selected by residents and staff., • May accompany developmentally disabled individuals to dances, camping trips, swimming, horseback riding, basketball, or other sports; assists in selection and teaching of appropriate community inclusion leisure activities., • Aids in the selection, purchase, care and use by developmentally disabled individuals of age appropriate personal belongings. Participating as Program Planning Team Member • Observes and reports on behavior and specific responses to programming, medication, interpersonal relationships, etc., • Actively participates at staff meetings by communicating observations concerning progress and reaction to various therapy programs., • At meetings, may suggest alternative programs or procedures based on experience with the individual’s habilitation plan., • Records all significant behavioral responses in prescribed format., • Participates in the development of individual program and habilitation plans., • May be asked to assist in the orientation and training of other staff., • Other duties that may be assigned Communication • As members of the Program Planning Team, DSP communicate with other direct care staff or with supervisory or clinical staff for the purpose of sharing information and obtaining direction for specific assignments. They also communicate with the developmentally disabled individuals in their care, their families and others who meet them. Essential Knowledge, Skills and Abilities • Knowledge of policies and procedures of OPWDD, as well as state and federal regulations as they apply to the care and treatment of the developmentally disabled., • Knowledge of active treatment programs as they relate to the developmentally disabled., • Currently AMAP certified or able to become certified within six months of hire., • Currently SCIP-R certified or able to become certified within six months of hire., • Currently CPR and First Aid certified or able to become certified within six months, • Ability to operate a motor vehicle safely Qualifications and Experience • High school diploma or GED or possess a Direct Support Professional (DSP) Certificate from an accredited public or private organization and the ability to provide direct services to adults with developmental disabilities. Related experience is desirable. Current clean New York State driver's license might be required depending on the shift. Preferred Education and/or Experience • Direct Care experience with people with mental and/or physical disabilities. AMAP, SCIP-R, CPR/SFA certified.

We are recruiting an experienced CNC Swiss Machinist / CNC Shop Manager for a growing precision machining company. \n \n This is a highly hands-on shop-floor leadership position for someone who can combine CNC Swiss machining expertise with day-to-day production leadership. The successful candidate will spend the majority of the day in the shop, working directly with machines and employees—not managing operations from an office. \n \n We are particularly interested in an experienced Swiss machinist, lead machinist, shop foreman, manufacturing supervisor, or shop manager who is comfortable setting up and operating equipment, troubleshooting machining issues, and keeping a high-mix production environment moving. \n \n CNC programming capability is highly desired. \n \n What You’ll Do: \n\n • Lead day-to-day machine shop operations while remaining actively involved on the production floor\n, • Set up and operate CNC Swiss screw machines to support production requirements\n, • Review drawings, specifications, tolerances, and job requirements before production\n, • Coordinate daily production schedules, machine assignments, manpower, materials, and job priorities\n, • Support frequent setups, short production runs, custom work, rush jobs, and changing customer requirements\n, • Troubleshoot machining, tooling, setup, quality, and production issues\n, • Program or modify CNC programs when needed, depending on experience\n, • Work with tooling, speeds and feeds, workholding, and machining processes to improve performance\n, • Perform and support first-article and in-process inspection using precision measuring equipment\n, • Ensure finished components meet print, tolerance, and quality requirements\n, • Monitor machine utilization, setup and cycle times, labor efficiency, scrap, rework, and overall shop productivity\n, • Identify bottlenecks and adjust production priorities to keep work flowing\n, • Coordinate preventive maintenance and equipment repairs to minimize downtime\n, • Train, develop, and provide day-to-day direction to machinists, operators, and other shop employees\n, • Drive improvements in setup time, cycle time, quality, throughput, and overall manufacturing efficiency\n\n \n Preferred Background: \n\n • Strong hands-on experience with CNC Swiss screw machining\n, • Experience setting up and operating Swiss-style CNC equipment\n, • Ability to program CNC equipment is highly desired\n, • Experience with CAM-based and CNC Swiss machining environments\n, • Strong understanding of CNC machine tools, Swiss machining processes, tooling, workholding, feeds and speeds, and machine setup\n, • Ability to read and interpret engineering drawings, GD&T, dimensions, tolerances, and manufacturing specifications\n, • Skilled with micrometers, gauges, and other precision inspection and measuring equipment\n, • Experience troubleshooting machining problems and refining setups and processes\n, • Background in a high-mix, low-volume or job-shop manufacturing environment with frequent setups is strongly preferred\n, • Previous experience as a Lead Machinist, Shop Foreman, Manufacturing Supervisor, Production Manager, or hands-on Shop Manager is beneficial\n, • Experience scheduling and prioritizing multiple jobs across machines and production resources\n, • Understanding of estimated versus actual machining hours, production efficiency, scrap, and job costs\n, • Experience machining small-diameter precision components is valuable\n, • Plastics machining experience is preferred but not required\n, • Strong shop-floor leadership and the ability to work directly alongside the production team\n\n \n Compensation & Benefits: \n\n • $80,000–$140,000 base salary, based on experience and technical capabilities\n, • Medical benefits\n, • 401(k) with employer matching\n, • Paid time off and company holidays\n, • Discretionary bonus opportunity\n, • Full-time, stable employment\n, • Opportunity for continued professional growth\n\n \n This opportunity is particularly well suited to someone who has developed strong CNC Swiss machining skills and is ready to combine those capabilities with broader responsibility for people, production, quality, scheduling, and overall shop performance. \n \n If you are a hands-on machining professional who enjoys solving problems on the shop floor and leading by example, we would welcome the opportunity to speak with you.

Job Description A. Duie Pyle is looking for an experienced, Fleet Maintenance Shop Supervisor to join our Fleet Maintenance Department at our Bronx, NY shop. As the Fleet Maintenance Supervisor, you’ll have the opportunity to oversee the maintenance and repair of Pyle equipment, coordinate and build work schedules, and monitor the distribution of work flow between employees. Why Pyle? • Up to $110,000 annually, depending on experience, • Start time: 7:00 AM, Monday-Friday, • Annual Benefits; Top competitive pay rates, • New, modern equipment to work on in clean shops, • Premier Northeast Carrier – 24 Shops across the Northeast Region Simply put, when it comes to getting the job done, Pyle People Deliver. A family-owned and operated business since 1924, Pyle believes in providing you with the resources and stability to succeed. Our promise is to provide outstanding service as it remains to be our first and foremost mission. Your main responsibilities will include, but are not limited to: • Monitoring and coordinating daily work schedules; monitoring Technician’s daily productivity and prioritized distribution of work flow between 1st, 2nd, and 3rd shifts, • Overseeing maintenance of all company-owned equipment in the fleet including but not limited to Tractor Trailers, Heavy Duty Trucks and Forklifts, • Performing quality repair audits ensuring standardization and excellence, • Counseling employees about work related issues and provide guidance, • Maintaining a safe and clean working environment for all employees ensuring OSHA standards are met, • Ensuring timely preventive/predictive maintenance is performed, • Effectively managing road calls to minimize driver downtime, • Communicating with Operations Leadership to ensure all equipment requirements are fulfilled, • Overseeing parts / stock room inventory and parts ordering on a daily basis, • Ensuring proper filing and archiving of shop-related documentation Your Benefits will include: • Medical, Dental, Vision, and Life Insurance, • 8 paid annual holidays – in addition to vacation and personal time off, • 401(k) with company match, • Paid Weekly via Direct Deposit, • Paid Vacation and Personal Time, • Annual Tool Allowance Program, • Annual, continual training, • Uniforms Provided To be successful in this role you will need to have the following: • Possess 3 - 5 years of experience in Class 8 truck repairs including electronic diesel engine repair and air brake systems, • High School Diploma or equivalent, • Excellent working knowledge of all heavy-duty truck and material handling equipment systems with proven diagnostic / troubleshooting skills set, • Valid driver's license (CDL) preferred, • Proven interpersonal skills with the ability to interact effectively with shop technicians and Operations Management, • Excellent record-keeping and organizational skills, • Ability to work all shifts as necessary Want a look under the hood? Click here to see what a typical day as a Pyle Technician looks like: https://vimeo.com/511212424 For a full job description associated with this posting, please contact A. Duie Pyle’s Human Resources department. This job posting is intended solely for external advertising purposes and does not represent a comprehensive list of all job-related duties and qualifications. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description Structural Steel, Miscellaneous Iron, and Stair Contractor is seeking an in-house employee to supervise our steel fabrication shop and yard operations. Primary Responsibilities: • Supervise and coordinate the daily activities of union steel workers, • Read and utilize blueprints/drawings to prepare work plans, • Established and adjust work sequences to meet schedules, • Assist workers in performing tasks such as welding, bolting, chipping and using power tools, • Supervise material handling, rigging and truck loading, • Maintain time and safety records, • Preparing material and equipment for shipment to various jobsite, • Organizing trucking schedules Essential Job Functions: • Coordinate activities with ECIW’s union field forces, • Maintain equipment, tools and consumables, • Analyze and resolve work problems., • Provide leadership in setting safety, production, and conduct examples, • Additional miscellaneous, incidental, or similar duties which may be required from a day-to-day supervisor Work Experience Requirements • Familiarity with steel members, erection equipment and tools, • Ability to read drawings and material lists, • Ability to safely rig material and equipment, • Experience in a steel fabrication shop, • Management experience Competitive pay and benefits offered.

Job DescriptionBenefits: • Employee discounts, • Free uniforms, • Training & development Job description: We are seeking an experienced Foreman / Technician (Tech Level 3) with strong leadership abilities and hands-on collision repair expertise. The ideal candidate must be capable of managing repairs from start to finish, ensuring high-quality workmanship, proper repair procedures, and efficient shop operations. This position requires a technician who not only performs advanced repairs but can also supervise and support other technicians, maintain production flow, and uphold safety and quality standards. Responsibilities • Oversee and supervise daily shop operations and technicians., • Perform and inspect repairs from initial damage assessment through final delivery., • Conduct and oversee:, • Welding and metal fabrication repairs, • Dent and body damage repairs, • Nick and minor damage repairs, • Bonding and adhesive repairs, • Plastic component repairs, • Structural and collision repairs, • Diagnose and repair or assist with:, • SRS (Airbag) systems, • ADAS (Advanced Driver Assistance Systems), • Operate and supervise the use of frame machines and measuring equipment., • Perform basic mechanical repairs related to collision repair work., • Ensure repairs meet manufacturer specifications and safety standards., • Maintain productivity, quality control, and repair documentation., • Train, mentor, and support technicians when needed., • Coordinate workflow to ensure repairs are completed on time.Requirements, • Minimum 5+ years of collision repair experience preferred., • Previous experience as a Foreman, Lead Technician, Shop Supervisor, or similar leadership role.Strong knowledge of:, • Welding techniques, • Dent and body repair, • Bonding and adhesive repair procedures, • Plastic repair methods, • Structural repair procedures, • SRS systems, • ADAS systems and calibrations, • Frame machine operation and measuring systems, • Basic mechanical repairs, • Ability to read and interpret repair procedures and OEM guidelines., • Strong troubleshooting and problem-solving skills., • Excellent leadership, communication, and organizational abilities., • Ability to manage multiple repairs and technicians simultaneously.Preferred Qualifications:, • I-CAR certifications or equivalent training., • Experience with modern vehicle technology and manufacturer repair procedures., • Experience working in a high-volume collision repair environment.Job Type: Full-time Work Location: Linden NJ Salary: up to $32/hr

Job Description Shift Manager (Bagel Sous) Location: PopUp Bagels About PopUp Bagels PopUp Bagels started as a simple backyard pickup window with one goal: create the perfect bagel and share it with friends. Today, we've grown into a fast-growing hospitality brand known for serving exceptional bagels, delivering memorable guest experiences, and fostering a culture built on quality, teamwork, and continuous improvement. At PopUp Bagels, we're passionate about scratch-made food, genuine hospitality, and developing great people. We invest in our teams, promote from within, and provide opportunities to build culinary, operational, and leadership skills in a fast-paced and rewarding environment. Position Summary As a Shift Supervisor (Bagel Sous), you will support daily shop operations by leading shifts, coaching team members, and ensuring culinary and hospitality standards are consistently executed. This hands-on leadership role works closely with restaurant leadership to drive operational excellence, maintain food quality standards, and create exceptional experiences for both guests and employees. The Bagel Sous serves as a role model on every shift, helping to develop team members, manage daily execution, and ensure all operational responsibilities are completed efficiently and to company standards. What You'll Do • Lead daily shift operations and support overall shop performance, • Coach, train, and develop team members across multiple stations, • Ensure food quality, presentation, accuracy, and hospitality standards are consistently met, • Support shift deployment, task management, and break compliance, • Assist with opening and closing procedures, cash handling, and daily operational routines, • Lead pre-shift meetings and communicate daily goals, priorities, and updates, • Monitor food preparation, inventory levels, prep production, and waste management, • Partner with leadership to maintain labor efficiency and operational excellence, • Resolve guest concerns professionally and create positive customer experiences, • Maintain compliance with food safety, sanitation, and Department of Health standards, • Support a positive, team-focused culture while driving accountability and results What We're Looking For • 1+ years of leadership experience in a restaurant, café, bakery, or hospitality environment, • Passion for food, hospitality, and team development, • Strong communication and interpersonal skills, • Ability to lead by example in a fast-paced environment, • Excellent organizational and problem-solving abilities, • Strong attention to detail and commitment to quality, • Food Safety or ServSafe Certification preferred, • Ability to learn multiple operational functions and support both front- and back-of-house teams, • Flexible availability, including mornings, evenings, weekends, and holidays Why Join PopUp Bagels? • Competitive hourly pay, • Flexible scheduling with full-time and part-time opportunities, • Leadership development and advancement opportunities, • Paid time off for eligible team members, • Complimentary PopUp Bagels and schmear during shifts, • Collaborative, team-oriented culture, • Opportunity to grow with an expanding brand focused on quality and hospitality Physical Requirements • Ability to stand and walk for extended periods, • Frequently lift and carry up to 25 pounds, • Occasionally lift and carry up to 50 pounds, • Ability to bend, reach, twist, and perform repetitive motions, • Comfortable working in a kitchen environment with exposure to heat, cold, noise, and cleaning chemicals Equal Opportunity Employer PopUp Bagels is committed to creating an inclusive workplace and is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to providing equal employment opportunities to all employees and applicants in accordance with applicable federal, state, and local laws. Join PopUp Bagels and help lead a team dedicated to delivering exceptional food, remarkable hospitality, and unforgettable guest experiences every day. ?✨

Job Description At First Student, our Maintenance Supervisors play a key role in keeping our fleet safe, reliable, and ready for service. This position oversees the day-to-day maintenance operation while remaining actively involved in the diagnosis, repair, and overhaul of buses and related equipment. The Maintenance Supervisor leads the shop team, coordinates vehicle availability with operations, and ensures all maintenance work meets company, state, and federal requirements. Pay: $70,000 - $80,000/year based on experience and qualifications Key Responsibilities • Schedule and oversee preventive maintenance, inspections, repairs, and other fleet maintenance activities., • Diagnose and troubleshoot mechanical issues involving diesel engines, buses, and related equipment., • Perform hands-on maintenance and repair work as needed., • Coordinate vehicle availability with dispatch, the Maintenance Manager, and other operations personnel., • Plan and distribute daily work assignments based on shop priorities and operational needs., • Delegate responsibilities, monitor performance, and provide direction and support to maintenance employees., • Assist with personnel matters, including hiring, promotions, performance management, and disciplinary recommendations, subject to management review and approval., • Ensure day-to-day compliance with company policies and all applicable state and federal requirements., • Review repair orders for accuracy, completeness, and proper documentation., • Work closely with location leadership to provide updates on fleet condition, maintenance priorities, staffing, and budget needs., • Order parts, fuel, and outside repair services when required., • Oversee vehicle fueling and related maintenance support activities., • Coordinate building or grounds services when assigned., • Identify opportunities to improve shop productivity, operating efficiency, safety, and vehicle reliability., • Complete special projects and other duties as assigned.Qualifications, • High school diploma or equivalent required., • Technical or vocational training preferred., • Valid CDL with all required endorsements., • At least three years of hands-on mechanical and supervisory experience., • Experience repairing and maintaining diesel engines, buses, or other heavy-duty vehicles preferred., • Strong mechanical troubleshooting and problem-solving skills., • Ability to lead employees, organize workloads, and manage competing priorities., • Good written and verbal communication skills., • Basic computer and maintenance-recordkeeping skills., • Ability to lift approximately 20 to 50 pounds.Working Conditions This position works primarily in a maintenance shop environment and is regularly exposed to dust, dirt, grease, noise, and other conditions associated with vehicle repair. The Maintenance Supervisor must be able to stand, bend, kneel, crouch, and work underneath vehicles, including while lying on a mechanic's dolly. The position requires regular hands-on work involving buses and maintenance equipment. Disclaimer This job description reflects the primary responsibilities and essential functions of the position. Management reserves the right to assign or reassign duties and responsibilities at any time based on business and operational needs. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description This is a rare chance to join our client, a globally recognized aerospace manufacturer that has spent 75+ years pushing the boundaries of turbine engine technology. Consistently ranked among the world's best employers, this publicly traded organization backs that reputation with a culture that genuinely prioritizes its people. What's in it for you? • Stability and momentum — a growing public company with deep industry leadership, • Benefits that start on day one: premium health coverage and a 9% 401(k) match — one of the strongest in the industry, • Employer-funded retirement savings contribution each pay period, • A workplace culture built around collaboration, inclusion, and continuous improvement, • Structured development programs to help you grow into your next role, • On-site fitness center access at participating locations Job Summary: The selected candidate will report to the Plant Manager and provide managerial and leadership support to the Procurement and Supply Chain Team to ensure Business Unit goals are met through the execution of procurement strategies. Procurement strategies include, but are not limited to, securing supply, cost savings, process optimization, and supplier risk mitigation. The overall goal is to support the production schedule while obtaining the best achievable value for supplies and services while maintaining compliance with company procedures. Environmental Health & Safety Responsibilities: • Expected to assist in the implementation of the company's EHS value and policy statement and its accompanying principles., • Comply with all department, facility, corporate, and regulatory EHS regulations., • Wear all required personal protective equipment., • Report all job-related illnesses and injuries (per employee handbook)., • Report all Safety, Health & Environmental concerns to your supervisor promptly., • Attend all EHS training. Responsibilities: • Directly responsible for the overall Plant procurement operations, which includes direct, indirect, and Capital spend., • Provide guidance and leadership to Plant Procurement Specialists and Supply Chain Planners., • Collaborate with the value stream (Operations, Maintenance, Engineering, Quality, Finance, etc.) to ensure procurement strategies align with Plant and BU goals., • Share savings targets of plant-specific spend with Location Management, Category Management, and stakeholders., • Manage supplier sourcing, negotiations, contracting, and the execution of agreements to support plant requirements., • Monitor supplier performance and place countermeasures to resolve any issues that may arise., • Communicate supplier issues to BU Procurement, Category Management, and Quality., • Review Plant Procurement metrics and take the necessary actions to ensure Plant and BU targets are met., • Responsible to ensure Procurement retains compliance with all auditing agencies., • Ensure the successful execution of ERP-related procurement processes including system enhancement implementations., • Responsible for Raw Material forecasting, inventory management, cost management, and researching potential BOM issues affecting inventory accuracy., • Oversee ERP item and raw material transactional activity to drive inventory accuracy — including accurate cycle count program monitoring and maintenance for raw materials., • Manage project-related teams and plant procurement and supply chain initiatives., • Ability to be flexible and manage competing priorities well; understand how to balance various deadlines and tensions both within the business and between the business and its partners. Qualifications BASIC QUALIFICATIONS: • Bachelor's degree from an accredited institution in Business, Management, Supply Chain, Logistics, IT, Politics, Policy, Finance, Accounting, Data Science/Analytics, Marketing/Communication, Economics, Mathematics, or Engineering., • Minimum 6 years' experience in Procurement or Supply Chain., • Knowledge and understanding of procurement and financial best practices and compliance (Sarbanes-Oxley, UCC Laws, Import/Export Laws, etc.)., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items. PREFERRED QUALIFICATIONS: • Procurement experience working in a fast-paced manufacturing environment., • Ability to write and negotiate complex contracts for the obtaining of goods and services., • Experience in Oracle or a similar type of Enterprise Business System., • Willingness to frequently visit the shop floor for a better understanding of Plant operations., • Customer-oriented personality., • Integrity and operates with utmost ethics; trustworthy; advocates for and complies with laws and audit functions; reports accurately; abides by agreed terms and conditions. About Augmentis Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: www.augment-is.com Representation/employer clarification: Augmentis is conducting this search on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring. Text Message Consent & Privacy As part of your application, you'll have the option to receive text updates about your status, screening, and scheduling. This is optional; it is not required to apply. See our Privacy Policy and SMS Terms & Conditions for details on how your information is used and protected.

Job Description An established property restoration company operating across 10 states is hiring an experienced mitigation technician to lead a crew in New York. This is field work. You are in the building the day the loss happens, usually before the insurance adjuster gets there. We are looking for someone who has already done this work and is ready to run the job, not learn it. WHAT YOU WILL DO • Lead a mitigation crew on residential and commercial losses., • Schedule and dispatch your crew across active jobs., • Respond to emergency water and fire losses., • Extract water, set containment, and protect unaffected areas., • Direct demo of affected materials: drywall, flooring, trim, insulation, cabinetry., • Set and monitor air movers, dehumidifiers, and air scrubbers., • Take moisture readings and keep the drying log accurate., • Photograph and document each room before, during, and after., • Perform mold and biohazard work in full PPE., • Track equipment, keep the truck stocked, and account for what leaves the shop., • Work an on-call rotation. Losses do not wait for business hours. WHAT WE ARE LOOKING FOR • Real history in the field. Three or more years in water or fire mitigation, restoration, or remediation., • Experience running a crew. You have directed other technicians on a job site and been responsible for the result., • Scheduling ability. You can sequence multiple active jobs, move people between them, and keep the day from falling apart., • Valid driver's license and a clean driving record. Required, no exceptions. You will be driving a company vehicle., • Able to lift 50 pounds repeatedly, climb ladders, and work in attics and crawl spaces., • Comfortable working in a respirator and full PPE., • Able to pass a background check., • Reliable and on time, with a phone you answer. A STRONG PLUS • IICRC certification: WRT, ASD, AMRT, or FSRT., • Experience on insurance carrier jobs., • CompanyCam, Encircle, or Xactimate familiarity., • Bilingual English and Spanish., • Construction or trade background alongside the restoration work. WHAT WE OFFER • Strong overtime. Emergency work means real hours, paid at time and a half, and our leads take home well above base., • IICRC certification paid for by the company, including levels you do not have yet., • Company vehicle and all equipment provided., • Steady year round work with a company operating in 10 states., • Room to move up. We promote from the field into supervisor and management roles, and we are growing. HOW TO APPLY Apply here and answer the screening questions. We review daily and call qualified applicants within 24 hours. In your application, tell us the first three things you do when you walk into a house with an active water loss, and the largest crew you have run. \nCompany Description An established property restoration company operating across 10 states. We respond to water, fire, smoke, and mold losses on insured residential and commercial properties, working directly with major insurance carriers. Our field crews handle emergency mitigation from the first call through drying and reconstruction. An established property restoration company operating across 10 states. We respond to water, fire, smoke, and mold losses on insured residential and commercial properties, working directly with major insurance carriers. Our field crews handle emergency mitigation from the first call through drying and reconstruction.

Job Description The primary responsibility of the Shop Team Leader is to oversee and work with a fabrication team to execute the technical drawings to appropriate finish levels and to maintain the scheduling goals for their assigned projects. This position reports to the Director of Fabrication. Job responsibilities include but are not limited to the following: Participate in Project Kickoff meetings, daily check-in meetings, and project post-mortem meetings as required by the Director of Fabrication. Review all scope-of-work/ Finish Schedule documentation produced by Production Management pertaining to your projects. Review all project milestones calendars produced by Production Management pertaining to your projects. Manage all on-site activities for all projects as assigned by the Director of Fabrication. Review forecast calendars of projects being estimated and flag schedule holes to senior management. Identify shortcomings in project workflow and actively work with direct supervisor to optimize and improve this process. This includes identifying when OT or Layoffs are needed. Personally manage assigned projects. Maintain the electronic task list of your projects. Communicate with Senior Staff, Technical Design, and Production Management as needed. Communicate with Purchasing and Logistics to ensure/confirm orders as needed. Keep projects on schedule while maintaining an efficient crew. This includes identifying when OT or layoffs are needed and coordinating those needs with the Director of Fabrication. Review drawings and assign them to various team members. Review shop drawings to ensure that all technical requirements have been met. Review and fit up as needed, finished scenery before releasing to paint, carpentry, or to the client to ensure quality control. Review load lists and hardware packs to ensure the correct items reach the end client as needed. Go onsite as needed to install or supervise the installation of your projects. Ensure team member timesheets are correct Supervise and work with crew to ensure production deadlines are met Required basic qualifications Minimum of 5+ years of manufacturing experience including supervisory experience Ability to read technical drawings Strong understanding of scenic construction and basic automation Ability to effectively prioritize, execute, and problem solve in a high-pressure environment and work efficiently within given time constraints; highly organized Ability to communicate ideas clearly Self-motivated; team oriented and highly collaborative work style Must be legally authorized to work in the United States without company sponsorship, now or in the future. Benefits • 10 vacation days per year., • 7 Shop observed Holidays with a comp policy for holidays worked., • 100% health insurance coverage for you as the employee with the ability for you to pay to cover additional family members., • 100% vision, dental, and life insurance coverage for you as the employee with the ability for you to pay to cover additional family members., • Comp Policy for worked holidays and weeks where more than 70 hours are worked., • 401k is available to contribute to - no company match currently. \nCompany Description Provider of Theatrical and Event custom fabrication and automation solutions. Provider of Theatrical and Event custom fabrication and automation solutions.

Job DescriptionParatransit Quality Control Specialist GVC II | Bronx, NY Full-Time | Varied Shifts Pay: $20.00/hr Start Your Career in Transportation and Maintenance GVC II is looking for a dependable, safety-minded Paratransit Quality Control Specialist to help keep our vehicles fueled, clean, inspected, and ready to serve. This is a hands-on role supporting daily fleet readiness and yard operations. You'll work around our maintenance operation, build relationships with mechanics and leadership, and gain valuable transportation experience with opportunities to grow into positions such as Mechanic, Maintenance Supervisor, or Paratransit Driver. What You'll Do • Fuel, inspect, and reposition paratransit vehicles, • Maintain accurate fuel, inventory, and variance records, • Check vehicles for visible damage and report concerns, • Inspect tires, fluids, supplies, and general vehicle condition, • Clean vehicles and help ensure they are ready for service, • Maintain clean and organized yard, fueling, and building areas, • Respond to spills and follow established safety procedures, • Communicate vehicle, maintenance, supply, and safety issues to the appropriate team, • Support other fleet, yard, and facility-related duties as assignedWhat We're Looking For, • Must be at least 21 years old, • High school diploma or equivalent, • Dependable, punctual, and safety-minded, • Comfortable working outdoors in varying weather conditions, • Able to perform physical and hands-on work throughout the shift, • Able to work a flexible schedule, including weekends, holidays, and extended hours when needed, • Strong attention to detail and ability to maintain accurate records, • Interest in developing a career in transportation, fleet maintenance, or operationsGVC II Benefits GVC II employees receive a competitive union benefits package that includes: • Medical, dental, and vision coverage with employee contribution based on a percentage of the current medical rate, • 1 week of vacation after 1 year of service, • 2 PTO days, • Paid birthday, • Paid holidays in accordance with the applicable agreement, • Seniority-based increases, • $25,000 company-paid life insurance, • Annual boot allowance, • Union 401(k), • Annual union-negotiated pay increasesWhy Join GVC II? This position is more than a fueling or yard job. It provides direct exposure to fleet operations and the maintenance shop while giving you an opportunity to learn the business and build a career within transportation. If you're dependable, willing to work, and interested in growing into a skilled transportation or maintenance role, this is a strong place to start. Apply Today Join GVC II and help keep New York City's paratransit fleet safe, clean, and ready to serve the community. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description About JCMLiving Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: https://jcmliving.com The Position Maintenance Supervisor - Looking for a hard-working and knowledgeable Supervisor to manage a team of six in a large luxury apartment community. The right candidate should have a working knowledge of computers, as well as electric, plumbing, drywall, flooring, appliances, windows and locks and HVAC. We offer great working conditions and hours and excellent wages - paid vacation and sick time 16-25 PAID holidays per year! A apartment is available as part of compensation package. Some responsibilities: • Keep an orderly, stocked and organized shop, • Schedule vendors and contractors, • Make sure all service requests within apartment community are completed on a timely basis, • Must be able to lift appliances, tile work, drywall work, appliance repair and installation, HVAC repairs, • Snow removal, • Carpentry, plumbing, light electrical, painting, refurbishing, cleaning, waste removal, heat and air-conditioning repair, masonry, grounds keeping, landscaping and sewer maintenance, • Carry out preventative maintenance program under the direction or Maintenance Supervisor, • Be available for emergency repairs and after-hour "on call" duty as required, • Must be capable of driving all company vehicles with valid driver's license (i.e. golf carts, quads and trucks), • Capable of using all maintenance tools, • Carrying out all maintenance duties safely that are required for this position Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time, • Free access to pools, fitness centers, pet spas, etc. Candidates, please submit their resume and salary requirements for consideration. All candidates have a drug and background check run on their applications before hire. https://jcmliving.com EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job DescriptionHaddad Plumbing and Heating Inc. is seeking an Assistant Project Manager to join our project operations team based in Newark, New Jersey. The Assistant Project Manager will support the planning, coordination, and execution of mechanical construction projects. This role works closely with Project Managers, field teams, subcontractors, and senior leadership to ensure projects are delivered safely, on schedule, and in accordance with approved drawings, specifications, and quality standards. The ideal candidate will be technically proficient, detail-oriented, and proactive, with strong communication and organizational skills and the ability to thrive in a fast-paced construction environment. The Assistant Project Manager reports to the Project Manager Supervisor and plays a key role in supporting project performance, accurate documentation, and day-to-day site coordination. Responsibilities: • Coordinate daily construction activities with field staff, project manager, construction manager, estimators, consultants, subcontractors, and relevant departments using approved drawings and materials., • Support the Project Manager to ensure effective performance., • Execute work according to shop drawings, specifications, construction schedules, and method statements., • Assist the technical team with issues as directed by senior management., • Monitor work progress against construction programs and submit site reports per the project reporting plan., • Control and coordinate subcontractor activities, reporting progress and potential issues., • Maintain site management information systems and record daily activities and circumstances impacting the project., • Provide senior management with regular feedback on project status, focusing on program, quality, variations, client issues, and other relevant factors., • Review drawings for accuracy, ensure availability of sufficient information, and use only current revisions of issued-for-construction drawings, withdrawing all superseded versions from the site.Education, Qualities & Skills required:, • Mechanical engineering degree from a recognized university., • Proficient in AutoCAD and knowledgeable in plumbing and HVAC design codes., • Required to have OSHA 30 certification., • Excellent presentation, written, and verbal communication skills., • Able to prioritize, work under pressure, and meet tight deadlines., • Initiative-driven and proactive. Strong interpersonal and organizational skills., • Capable of managing sensitive and confidential information., • Effective both independentlyCompensation: $65,000 - $75,000 Annually Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours: This is a full-time position. Days and hours of work are Monday through Friday 7:00 am – 5:00 pm. Powered by JazzHR XQfjpVHqAN

Job Description JOB TITLE: Senior Director, Operating Budget SALARY RANGE: $133,519 - $166,899 (FIN008) DEPT/DIV: Buses AGENCY: TA / OA / MTA Bus SUPERVISOR Chief Budget Officer LOCATION: East New York Depot HOURS OF WORK: 8 hours per day POSITION SUMMARY: This position has direct accountability for process improvement, analysis and reporting of all personnel and salary and wage expenses in the Department of Buses. Assigns and directs staff responsible for reporting on salary and wage expenses and process improvement in timekeeping operations. Leverages data, reporting and software applications to improve the transparency and visibility of our staffing and labor expense information. Performs audits of depot timekeeping and staffing operations. Provides employees with direction regarding compliance with NYCT rules, regulations, effective labor relations and personnel policies. Implements training programs and develops talent. RESPONSIBILITIES: • Performs variance reporting and analysis on salary and wage expenses and labor hour utilization., • Monitors depot and shop utilization of overtime against budget., • Recommends and implements successful strategies to better utilize overtime within budget., • Assists in the development of applications, reports and presentations to executive management that effectively communicate Buses performance in labor utilization., • Collaborates and communicates with operations personnel to provide clear strategic direction on utilizing best practices for timekeeping and staffing functions., • Partners with Strategic Planners and GSs of Support Services to improve our utilization of labor resources., • Works with management to develop and improve our staffing procedures and policies in a manner that comply with our collective bargaining agreements., • Performs regular compliance audits on the data in UTS, Spear and Bus trek to ensure adherence to policy and procedures., • Utilizes software applications and data visualization tools to make timekeeping and staffing more efficient and transparent., • Develop standard operating procedures for depot and shop staffing and timekeeping., • Partner with depot operations to standardize the way we utilize overtime., • Create standard operating procedures that support financial reporting, depot timekeeping, and labor resource utilization., • Create a sustainable program that develops future GSs of Support Services and dispatchers who perform timekeeping functions., • Train depot operating to utilize data visualization tools to become more efficient and accurate in their job functions., • Prepare executive reporting and presentations for the Office of the NYCT President and Buses EVP related to financial performance, availability, timekeeping and OT utilization. EDUCATION AND EXPERIENCE: • Degree Required: Bachelor’s, • Major Field of Study: Business, Economics, Finance or Data Science or a satisfactory equivalent., • Total Number of Years’ Experience: 10 years, • Years of Managerial/Supervisory Experience: 5 years DESIRED SKILLS: • Knowledge of the environment and operating of a mass transit system in a large union environment., • Knowledge of financial and timekeeping systems. Ability to effectively manage a group of employees in a fast paced and highly data-driven environment., • Good working knowledge of labor relations and collective bargaining agreements., • Superior competency with leveraging technology to implement process improvements., • Previous experience in project management., • Experience in timekeeping and staffing operations., • Ability to effectively communicate with employees at all levels in the organization, including represented employees., • Strong Verbal, communication and quantitative skills. SELECTION METHOD: Based on evaluation of education, skills, experience, interview, and written assessment. All selected candidates will be subject to a full background investigation that includes employment and education. Discrepancies may lead to dismissal. OTHER INFORMATION: Appointment may be at a comparable level to current level of selected candidate. (If necessary) As an employee of MTA NYC Transit, you may be required to complete an annual financial disclosure statement with the state of New York, if your position earns more than $101,379 (this is subject to change) per year or if the position is designated as a policy maker. HOW TO APPLY: Qualified applicants can submit an online application by clicking on the ‘APPLY NOW’ button from either the CAREERS page or from the JOB DESCRIPTION page. If you have previously applied online for other positions, enter your Username and Password. If it is your first registration, click on the CLICK HERE TO REGISTER hyperlink and enter a Username and Password; then click on the REGISTER button. EQUAL EMPLOYMENT OPPORTUNITY: MTA and its subsidiary and affiliated agencies are Equal Opportunity Employers, including with respect to veteran status and individuals with disabilities. The MTA encourages qualified applicants from diverse backgrounds, experiences, and abilities, including military service members, to apply.

Job DescriptionCompany Description: (MALIN+GOETZ) is a founder-based gender-neutral beauty and lifestyle business based in New York City. We operate flagship apothecaries in NYC, California and Hong Kong: along with an expanding presence online through www.malinandgoetz.com. The brand is distributed internationally through high-end accounts including Nordstrom, Selfridges, Space NK, and Liberty as well as amenity partners that include 5* hotels, spas, and concept gyms. Position Summary: The NoLita Sales Lead is responsible for assisting in the oversight of the day-to-day operations of the assigned store while maintaining focus on store sales goals. In addition to providing in-store customer sales support, the Sales Lead will be responsible for assisting in various tasks including (store inventory, marketing, and building the store’s client base). Sales Lead’s also assist with choreographing the daily activities of a team of retail specialists. They practice entrepreneurial ownership of their shop and make choices which benefit the store in a successful direction. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sales + Customer Service • Lead as an ambassador of the (MALIN+GOETZ) brand., • Motivate and support staff and coach the team on the sales floor providing relevant and consistent feedback to improve store performance., • Review sales performance with the Shop Manager and work with the team to deliver on or above budgeted sales., • Reinforce store protocol within company policy and procedures with an emphasis on customer service., • Foster a harmonious positive work environment and provide a safe and clean environment for our customers and associates., • Assist in ensuring the team is well versed in the brand and has a thorough understanding of our products., • Ensure all functions of the store are maintained to support a superior shopping experience. Operations + Marketing • Ensure the entire store is clean, shop ready and open for business at the appropriate time each day., • Communicate in a timely manner with Shop Manager when issues arise which may hamper store operations., • Manage the cash register bank to assure proper mix of cash and change., • Perform inventory counts to coordinate orders for stock with office in a responsible and timely manner., • Cultivate relationships within the neighborhood for cross-promotional, marketing, and potential amenity opportunities., • Review & execute merchandising directives, visual displays, and other in-store activations supporting promotional events or holiday shopping occasions., • Partner with store Leadership and Training and Education Manager on training the store team and new hires on brand history, product knowledge and our superior customer service model. Competencies: To perform the job successfully, an individual should demonstrate the following. • Achievement Focus - Demonstrates persistence and overcomes obstacles. Measures self against standard of excellence. Recognizes and acts on opportunities. Sets and achieves challenging goals. Takes calculated risks to accomplish goals., • Communications - Exhibits good listening and comprehension. Expresses ideas and thoughts in written form. Expresses ideas and thoughts verbally. Keeps others adequately informed. Selects and uses appropriate communication methods., • Managing Customer Focus - Develops new approaches to meeting customer needs. Establishes customer service standards. Monitors customer satisfaction. Promotes customer focus. Provides training in customer service delivery., • Managing People – Assists in developing teams' skills and encourages growth. Provides direction and gains compliance., • Planning and Organization - Integrates changes smoothly. Plans for additional resources. Prioritizes and plans work activities. Sets goals and objectives. Uses time efficiently. Works in an organized manner., • Problem Solving - Develops alternative solutions. Gathers and analyzes information skillfully. Identifies problems in a timely manner. Resolves problems in early stages. Works well in group problem solving situations. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: • 1 year of retail customer service experience in a client-focused environment (preferably in the beauty industry)., • Overall knowledge of the business landscape and ability to translate findings to positively impact business., • Independent work ethic and time management skills., • Ability to work retail hours including days, nights, weekends and special events in a fast-paced work environment., • Ability to stand and move about the store more than 90% of scheduled shift. Benefits: • The hourly rate for this position is $23 per hour., • Full-time employees are eligible for medical, dental, and vision insurance, employer paid life insurance, 401k plan, pre-tax commuter benefits, quarterly gratis, employee discount, long-term and short-term disability leave, and much more., • Time off includes paid company holidays, paid vacation/personal/sick/birthday hours and volunteer time Language Ability: Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Speak effectively before groups of customers or employees. Mathematical Ability: Calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference and volume. Apply concepts of basic algebra and geometry. Reasoning Ability: Define problems, collect data, establish facts and draw valid conclusions. Interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Computer Skills: Experience with the Microsoft Office suite preferred, especially Excel. Strong experience and aptitude with Point-of-Sale (POS) computer systems. Supervisory Responsibilities: Coach and lead up to 4 indirect reports; full-time associates and/or part-time associates. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position involves constant moving, talking, hearing, reaching, grabbing and standing for at least two consecutive hours. May occasionally involve stooping, kneeling, crouching and climbing ladders. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. (MALIN+GOETZ) is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, creed, religion, gender (including gender identity or expression), pregnancy, childbirth or related medical conditions, sexual orientation, marital status, domestic violence, sexual violence or stalking victim status, ancestry, national origin, alienage or citizenship, age, disability, military or veteran status, genetic information or predisposing genetic characteristic, or other protected status. Powered by JazzHR oVI4rJRPSc

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description This position is responsible for the safety, the productivity and the quality mindset of the shop floor employees. The position is responsible for assuring their designated team is achieving productivity goals, adhering to company initiatives and culture throughout the shop floor. In this role, a candidate should expect to spend a majority of their time on the shop floor with the shop floor employees. Coaching, mentoring, training and communication are key elements of this job. • Responsible for communicating to employees, providing a link between what they do and what the business needs, • Teach lean concepts and actively engage employees to improve speed, quality and reduce cost, • Participate and champion continuous improvement events, • Coach and guide employees about proper conduct and behaviors in line with company culture, • Provide feedback and maintain documentation regarding employee behaviors (good & bad), • Ensure cell employees adhere to company policies (e.g. following operating instructions, safety protocols, etc.), • Establish and enforce policies (manufacturing, quality, safety), • Responsible for employee time and attendance, • Audit overtime usage and seek improvements to reduce as necessary, • Optimize resource allocations – manpower & equipment, • Establish and sustain a 5S culture, • Assure employees have adequate training to achieve quality and productivity requirements, • Team building, • Use problem solving and critical thinking skills to overcome manufacturing obstacles, • Encourage problem solving at the operator level, • Lead and participate in Gemba walks, • Investigate safety, quality or productivity issues, • Create and assure that KPI’s are being tracked and improvements are sought, • Manage and communicate resource exceptions (time off / coverage), • Produce parts to meet master production schedule requirements – takt time, • Responsible to expedite jobs outside of cell/shared resources, • Provide timely commitments on WIP and ensure that all commit dates are on track and met., • Responsible for WIP quantities and accuracy. Qualifications College helpful but not required Supervisor experience required MS Office, ERP systems helpful Additional Information • Leadership skills:, • Strong communication with subordinates, peers and management., • Ability to motivate others, • Ability to train and delegate other, • Effectively provide feedback to reports and peers, • Be accountable for the performance of the team’s metrics and its members’ behaviors, • Mathematical skills; calculating figures, formulas, • Organize, plan and prioritize work in a fast paced, dynamic environment, • Critical thinking, decision making, problem solving – analyze information and choose best solution, • Information gathering, • Monitoring and reviewing available data (i.e. production performance or quality data) to detect and assess problems, • Lean or six sigma training or experience, • Ability to seek out opportunities independently and offer solutions, • Must be comfortable in a manufacturing environment, • Must be able to work in an office environment, i.e., sitting for long periods of time; extensive computer work (typing), • May be required to lift up to 50 lbs., • May require some travel; i.e., car, train, plane We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Title: Shop Technician Salary Range: $20-$24/Hour The purpose of this position is to pull and stage equipment from warehouse for outbound shows. Essential Duties/Responsibilities • Preparing/returning show equipment., • Package and label items appropriately for transportation or based on show requirements., • Work with operations to ensure proper substitutions on shortages., • Receive sub-rented items into order to ensure fulfillment., • Create Shipping manifest or carnet prior to shipping., • Responsible for pushing the equipment to various docking stations for outbound delivery., • Loading/unloading trucks., • Assist restocking delivered equipment in various locations throughout the warehouse., • Document service in inventory system and report all damaged equipment to operations., • Keep detailed records of maintenance, QC, and items entered into repair., • Perform other duties as assigned by supervisor. Position Type / Expected Hours of Work: Full time temporary, with ability to work overtime, including nights and weekends. Position Requirements: • R2 basic knowledge., • Positive Attitude and ability to work independently., • Experience in a warehouse or shop environment is a plus., • Attention to detail, ability to multitask, and meet deadlines., • Ability to lift 50 pounds on a frequent basis., • Must be able to work in a team environment., • Ability to spend long periods of work time standing or moving in a 70,000+ square foot warehouse., • Physical activities include using hand tools, bending, stooping, lifting, climbing stairs, carrying, walking and/or reaching on a frequent basis., • Certified to drive sit down and standup forklift is a plus., • Computer literacy / experience with Microsoft office is a plus., • Clean driving record.

Job DescriptionKreuther Handcrafted Chocolate, the product of years of culinary partnership between Chef Gabriel Kreuther and Pastry Chef Marc Aumont, is looking for a shift supervisor to oversee daily service operations and supervise a small team of sales associates. KHC provides the opportunity work for Chef Marc Aumont, a true chocolate artist who creates inventive chocolates, pastries, and chocolate sculptures rooted in classical French technique and inspired by classic New York flavor combinations. The concept of the shop is simple: only the best quality ingredients and finest craftsmanship served in beautiful, thoughtful packaging. The right candidate has a love for chocolate, passion for connecting with people, excellent customer service skills, and a desire to learn and grow with our team. Key Responsibilities: • Leading the team in customer service, • Supervising small team of sales associates, • Overseeing service operations Knowledge, Skills, and Abilities: • Effective communication, • Experience with POS systems, • Proficient in Microsoft Office applications, • Demonstrate ownership of job responsibilities through focus, determination, and attention to detail with the goal of elevating the customer experience in every interaction. Benefits: • Competitive pay rate, • Career advancement opportunities, • Medical and dental insurance, • Pre-tax commuter benefits Kreuther Handcrafted Chocolates is an Equal Employment Opportunity workplace and believes that all employees are entitled to Equal Employment Opportunity, and that the success of Kreuther Handcrafted Chocolates is primarily dependent in its employees. We do not discriminate against employees or applicants for employment because of race, age, ancestry, creed, color, religion, gender, sexual orientation, pregnancy, unemployment status, gender identity or expression, transgender status, marital status, national origin, handicap, physical or mental disability, covered veteran and/or military status, genetic information, or any other characteristic as protected under applicable federal, state, and local law. This policy applies to all employment practices of Kreuther Handcrafted Chocolates including, but not limited to, recruiting, hiring (or failure to hire), placement, promotions, transfers, training, compensation, fringe benefits, demotions, layoffs, and termination. If you are interested in joining our team, please send us your resume. We look forward to meeting you!

Job Description Overview US Facade is a leading curtain wall contractor specializing in high-end buildings in urban areas across the United States. We are actively seeking a motivated Assistant Project Manager (APM) to support our Senior Project Managers in the execution of complex facade projects. This is a pivotal support role where you will bridge the gap between design, fabrication, and on-site installation. You will work under the direct guidance of experienced Project Managers while gaining hands-on experience in managing scopes such as Window Walls, Curtain Walls, Storefronts, and Metal Panels. This position offers significant autonomy in daily tasks and provides a clear pathway for career advancement in the construction and real estate development industry. If you are interested in this position, please visit our website and submit your application through the link below: https://www.us-facade.com/services Responsibilities: Project Coordination & Administration: • Assist the Project Manager in the overall planning, direction, and coordination of project activities to ensure deadlines and cost objectives are met., • Manage the Submittal Process: Coordinate shop drawings and sample submissions between Architects, Engineers, Drafters, and Fabricators. Maintain accurate submittal logs and track approval statuses., • Document Control: Ensure the project team has the most up-to-date structural drawings, interface drawings, and revisions. Distribute updates to the Design and Site teams promptly. Schedule & Financial Support: • Assist in creating and updating Project Schedules based on client needs, factual durations, and lead times. Monitor milestones and flag potential delays to the PM., • Support the financial lifecycle of the project by assisting with Schedule of Values (SOV), preparing monthly requisitions (pay apps), and tracking Change Orders. Logistics & Supply Chain: • Coordinate Materials: Track fabrication status and coordinate the release of materials to align with the installation schedule., • Logistics Management: Coordinate deliveries to job sites, including verifying hoist/crane access, confirming trucking arrangements, and ensuring field personnel are notified and ready to receive materials. Site Operations & Quality Control: • Perform routine Site Visits to monitor progress and quality., • Field Reporting: Document site conditions, verify that work matches approved details, and generate field reports/punch lists., • Maintain daily communication with the Site Supervisor and field personnel to ensure they have the necessary resources, drawings, and materials to work efficiently., • Act as a liaison between the office and the field to resolve technical discrepancies or RFI (Request for Information) issues. Qualification: Education & Technical Skills: • Bachelor’s degree in Architecture, Civil Engineering, Construction Management, or a related field (Master’s degree is a plus)., • Proficiency in AutoCAD is required. (Ability to read and interpret architectural/structural drawings is essential)., • Strong command of Microsoft Office (Excel, Word, Project)., • Aptitude to learn new project management software (e.g., Procore, Bluebeam) quickly. Experience & Knowledge: • 1-3 years of experience in Construction Management, Project Engineering, or Architecture., • General knowledge of construction industry standards and practices., • Preferred: Familiarity with the Facade/Curtain Wall industry (Glass, Glazing, Metal Panels). Soft Skills & Languages: • Bilingual Required: Professional proficiency in English and Chinese Mandarin (Written & Verbal) to effectively communicate with internal teams and vendors., • Excellent organizational skills with high attention to detail., • Strong communication skills to effectively collaborate with GCs, Architects, and Field Teams. \nCompany Description We are a premier facade subcontractor specializing in high-end, high-rise, and mixed-use developments. With a focus on custom engineering and precision installation, we bridge the gap between architectural ambition and construction reality. Our mission is to deliver high-performing building envelopes that define skylines and stand the test of time. We don’t just install facades; we provide comprehensive solutions that ensure aesthetic integrity, energy efficiency, and structural durability. We are a premier facade subcontractor specializing in high-end, high-rise, and mixed-use developments. With a focus on custom engineering and precision installation, we bridge the gap between architectural ambition and construction reality. Our mission is to deliver high-performing building envelopes that define skylines and stand the test of time. We don’t just install facades; we provide comprehensive solutions that ensure aesthetic integrity, energy efficiency, and structural durability.

Job DescriptionMission Statement: To deliver the best technical, and finished quality construction and to develop a superior relationship with the client that lasts as long as they own their home and beyond. Location: In person, 5 days per week, on the job site in Westchester County, NY. Job Summary: The Project Engineer is responsible for assisting the Construction Supervisor with the technical execution of the assigned project, ensuring work in the field is built accurately to the plans and specifications, utilizing superior technical and organizational skills. The Project Engineer works closely with the Project Team and Subcontractors to coordinate drawings, verify field conditions, and maintain project information in Procore. Major Job Responsibilities: • Assists Construction Supervisor with field layout., • Checks field dimensions against plans and specifications and alerts Project Team as well as Construction Supervisor to potential discrepancies., • Reviews shop drawings for conformance with design documents., • Performs take-offs., • Creates coordinated drawings to assist the Project Team and Subcontractors with construction., • Assists with plan management, submittals and RFI's in Procore., • Corresponds regularly with Subcontractors, Architects and Design team to resolve field and drawing coordination issues.Other Responsibilities:, • Complete online training and refresher courses as needed., • Attend Company level meetings as requested., • Assist with site supervision if needed., • Project reassignment as needed for coverage.Requirements:, • Minimum of 4-year college degree in Engineering or Architecture., • Minimum of 3 years' experience working as an Engineer or Architect., • Technical skills to include: AutoCAD, Revit, Procore., • Ability to work in person 5 days per week on the job site in Westchester County, NY.Key Competencies:, • Strong technical and organizational skills, • Attention to detail, • Self-starter with ambition for growth, • Natural collaborator, • Resourceful, • Multitasker, • Professional with strong work ethic, • Solid time management skills, • Demonstrated interest in construction as a careerApplication: Submit resume and cover letter to: info@flowcon.net Powered by JazzHR J5etEOlaza

Job Description CNC Machinist Shift: 1st Shift: 7:00 AM – 4:00 PM (Potential OT) Salary: $25.00 – $33.00 per hour Who we are A well-established specialty component manufacturing facility located in Newark, NJ, serving critical defense and heavy industry partners. The organization is dedicated to high-quality production, workplace safety, and continuous improvement across all operations. CNC Machinist Role The CNC Machinist sets up, operates, and monitors vertical milling machinery to manufacture high-precision components to exact customer specifications. CNC Machinist Responsibilities • Set up and operate CNC vertical milling machines to produce precision components, • Perform equipment pre-operation checks to ensure proper setup, startup, and continuous running, • Monitor multi-equipment operations during production runs to minimize downtime and maintain quality standards, • Select appropriate speeds, feeds, and tooling based on material and part specifications, • Inspect finished parts using precision tools to ensure exact alignment with blueprint specifications, • Perform basic troubleshooting and adjust machine parameters as needed during operation, • Maintain clear communication with team members and support teams to maximize production efficiency, • Rotate across different departmental work centers as required CNC Machinist Reporting Relationships Reports directly to the Machine Shop Supervisor with no direct reports About You • Possess at least five years of manufacturing or precision machining experience, • Demonstrate proficiency setting up and operating CNC vertical mills, • Read and interpret engineering blueprints, schematics, and technical manuals, • Program and edit machine functions using G&M code, • Utilize precision measuring instruments including micrometers, calipers, and gauges, • Operate material handling equipment safely within a production facility, • Demonstrate English communication skills to read, write, and count inventory accurately, • Lift up to 40 lbs and work effectively in an active shop environment Next Steps If detail-oriented and quality-focused describes you, we would like to hear from you. Additional Information • Physical Demands & Working Conditions: Position requires standing for long periods, bending, reaching, and lifting up to 40 lbs. Operates in a manufacturing environment near active machinery., • Equal Opportunity Employer: All qualified applicants receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. #INDRBR2

Job Description About BRIC: BRIC is a leading arts and media institution anchored in Downtown Brooklyn whose work spans contemporary visual and performing arts, media, and civic action. For over forty years, BRIC has shaped Brooklyn’s cultural and media landscape by presenting and incubating artists, creators, students, and media makers. As a creative catalyst for their community, BRIC ignites learning in people of all ages and centralizes diverse voices that take risks and drive culture forward. BRIC builds Brooklyn’s creative future. About the Production Manager Role: BRIC seeks a Production Manager with a theatrical, visual art exhibition, and/or live events production background to plan and execute productions across BRIC's live event and exhibition portfolio. Reporting to the Associate Director, Live Events & Media Production, the Production Manager will oversee several overlapping projects throughout the year, including galas, rentals, public programs, exhibitions, and house parties, that are in in-person, hybrid, and virtual. They will collaborate across departments including Operations, Development, Partnerships, and Rentals, acting as a day-to-day technical lead from inception through strike. The Production Manager manages crew, vendors, equipment, and on-site execution while collaborating with curators, artists, producers, and clients to deliver work that meets BRIC's artistic and safety standards. This role plays a critical part in serving BRIC's community-centered mission. What You’ll Do in the Role: The Production Manager will be responsible for the following in addition to any other projects as assigned by their manager, the Associate Director, Live Events & Media Production: Production Execution • Plan, devise, and coordinate technical, staging, and production requirements for assigned events, exhibitions, and rentals, • Oversee assigned programming from inception through completion, including on-site vendor management, • Lead production meetings, processes, equipment setup, and crew assignments for assigned projects, • Act as Production Manager and/or Supervisor on assigned events, overseeing crew and Run of Day, • Serve as day-to-day technical point of contact for BRIC internal Producers, externals Rental Clients, and various vendors on assigned projects Exhibitions & Fabrication • Collaborate with curators, artists, and directors to design and install exhibitions, including digital drawings, renderings, and fabrication drawings, • Coordinate printing, framing, mounting, fabrication, A/V tech, and gallery lighting, • Draft installation timelines and checklists; organize artwork transportation and condition reporting, • Supervise art handlers and technicians on the floor; install artwork, AV components, and wall graphics, • Guide fabricators, produce prototypes and production schedules, and maintain safe and working shop equipment (lifts, saws, drill press, hand and power tools), • Maintain wood shop, galleries, exhibition storage, and art handler inventory Crew & Vendor Coordination • Recruit, schedule, and onboard freelance and part-time hourly crew for assigned projects, • Train and mentor freelance staff through load-ins, tech rehearsals, performances, and strikes, • Manage vendors on-site during events and installations Administrative & Budget Support • Attend production team meetings and contribute to post-production debriefs, • Track freelance hours and approve timesheets for payroll, • Maintain project documentation: meeting reports, staffing spreadsheets, production media, manuals, • Research and purchase materials, process supplier payments, and perform weekly bookkeeping for assigned projects, • Build project budgets in collaboration with the Associate Director and Director of Production Policy & Safety • Implement production policies and safety protocols on assigned projects, • Contribute to departmental policy and process improvements You’ll Bring these Skills and Strengths to the Role: • Mission & Values Alignment: A passion for BRIC’s support of the arts in Brooklyn and a deep commitment to building community, igniting learning, and making change through the arts and creativity., • Experience & Qualifications:, • Minimum 5 years' experience as a production manager, project manager, or with a musical touring production, museum/gallery, or non-profit arts space, • Experience in lighting, audio, projections, theatrical carpentry, and/or art handling, fabrication, and installation, • Working knowledge of Google Suite, Microsoft Office Suite, Momentus event management software, Zoom, vMix, OBS, CAD, and SketchUp, • Demonstrated ability to manage and prioritize a complex workload and collaborate across staff, artists, vendors, and community members of diverse backgrounds, • OSHA, CPR, and AED certifications, knowledge of ETC consoles and QLab, and a valid driver's license (with 26' box truck experience) are a plus, • Communication & Relationship Building: Committed to effective communication and building relationships with internal staff, producers, artists, external crew, clients, and vendors., • Commitment to Equity & Inclusion: Brings experience operationalizing equity within event production and setting an equity and justice rooted strategy for staffing and team management. Other Things to Know: • Compensation: The annual salary range for this position is $65K - $80K., • Status and location: This is a full-time, exempt role based in our Brooklyn office., • Benefits: BRIC has a comprehensive benefits package, including: paid time off, 403B retirement plan, pre-tax transit cards, medical flexible spending plans, and more. BRIC currently pays 100% of the premium for employee medical, dental and vision coverage starting on the first of the month after 2 months of employment., • Mission & Values: BRIC is committed to building Brooklyn's creative future. We advance opportunities for visual artists, performers, and media makers. We present bold work that reflects diverse audiences and speaks to the world. We ignite learning in people of all ages. We unite Brooklyn through art and creativity to build community and make change. How to Apply: All applicants must submit a resume together with a cover letter outlining the ways in which their skills and experience align with our specific needs via our online application portal found here on our website. Candidates of color and from traditionally underrepresented backgrounds are highly encouraged to apply. BRIC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, gender identity or expression, sexual orientation, national origin, age, religion, creed, disability, military and veteran status, genetic information or any other factor which cannot be used as a basis for an employment decision.

Job Description Summary The General Manager will lead the coordination and planning of everyday business operations. The General Manager is a team builder and helps provide support and direction to ensure the operations of the business run smoothly. Job Expectations The General Manager is always responsible and accountable for all restaurant activities. The General Manager ensures all Restaurant Management and Team Members are performing their job responsibilities and meeting expectations in all areas of their job descriptions. The General Manager is expected to create, execute and follow-up on the Restaurant's Business Plan. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Communicate to their immediate supervisor when additional training guidance and practice is needed, • Ensure that required Ops Walks and Q&A checks to correct areas of opportunity are being completed effectively and consistently, • Ensure that shift schedules are organized for Team Members and monitor/coach attendance, tardiness and time off, • Understand how each job responsibility impacts guests, employees, and overall restaurant operations, • Ensure the Restaurant Management Team and Team Members work together to prepare items on the Dave’s Hot Chicken menu while following cooking instructions, safety procedures, and sanitary requirements, • Ensure restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance results, • Provide direction/supervision/feedback for their management team & Team Members to maintain levels of high productivity and team morale, • Institute and follow advanced cash handling policies and procedures, • Hire, train, schedule and oversee the daily tasks of their teams, • Manage purchasing, inventory, maintenance and other operational functions, • Develop strategies for better workplace efficiency and goal achievement, • Focus on building sales and forecasting future performance, • Effectively plan, organize, and implement all daily operational routines and activities with the management team, • Ensure all required administrative duties and daily paperwork including required checklists are completed, • Ensure Restaurant is opened and closed according to DHC policy, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize restaurant costs; properly uses all products, supplies, and equipment facilities, • Communicate effectively with the Restaurant Management Team & Team Members and to resolve any interpersonal issues as neededRequirements, • Current student or high school diploma/GED preferred, • Must be at least 21 years old and fluent in English, • Previous Assistant General Manager/General Manager experience, • Certified in all stations and Management positions following the DHC Training Program, • Current ServSafe Certification, • Flexibility to work nights, weekends, holidays, opening, and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to bend and stoop and lift 50 - 75 lbs. comfortably, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from the Guest's point of view, • Effective communicator with co-workers and the Restaurant Management Team, • Excellent organization, planning, time management, delegation, and problem-solving skillsTransportation & Accessibility:, • Must have reliable transportation to work, a driver’s license and proof of insurance, • Must have telephone or other reliable method of communicating with Restaurant Management Team and TeammatesAbout Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read "East Hollywood's Late Night Chicken Stand Might Blow Your Mind." Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada. We use eVerify to confirm U.S. Employment eligibility.

Job DescriptionDescription: • Analyze production drawings, CAD models, and work orders to develop, test , and optimize CNC programs, ensuring accurate dimensions and efficient production cycles., • Utilize CAD/CAM software (AutoCAD, Rhino, Alphacam & CAM software) to translate designs into machine-readable code., • Determine, select, and manage appropriate cutting tools, speeds and feed rates for wood components., • Simplify machining time to enhance productivity and efficiency., • Support the shop with technical questions and troubleshooting., • Perform other duties and responsibilities as directed by the Supervisor and the Production Manager.Requirements:, • Bachelor's degree or equivalent in Engineering or Computer Science, • Minimum 5 years’ experience as a CNC programmer in architectural millwork and casework., • 5 years' experience in AutoCad., • 5 years' experience in Rhino, • 5 years' experience in Alphacam or other CAM software, • Experience with Homag CNC machines is a plus., • Excellent organizational and time management skills, • Excellent oral and written communication, • Must be able to work overtime when needed, • Highly motivated with the ability to work with minimum supervision

Job DescriptionThis position will perform routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under direct supervision. Handles basic issues and problems and refers more complex issues to higher-level staff. All work is performed with a commitment to safety.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$23.00/hr based on CBAMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on basic maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components, • Assist Tech II or III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Assist in the performance of mechanical repairs including the repair of brakes, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately, • Diagnoses and performs accurately all phases of vehicle and equipment repair under direct supervision., • Evaluates completed work prior to release and seeks approval where required, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Moves vehicles safely between job and work area, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement highly preferred to perform test drives or assist with road call response (expected within 3 months of hire, exceptions can be submitted for approval by Maintenance Leadership., • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 1 ASE within 24 months of hire) Minimum Experience or Skills Required • Basic mechanical aptitude and 0-1 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Basic problem-solving ability, • Basic computer skills, • Comfortable using hand tools, • Good customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess basic mechanic hand tools with at least enough tools to perform job requirements Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description Who We Are South Oxford Management (SOM) is a leading full-service property management company with a presence in Texas, Georgia, Virginia, New Jersey, Florida, and Connecticut. We are committed to delivering exceptional experiences for both our residents and team members. Our owners and leadership team bring extensive industry experience, ensuring that quality and excellence are woven into every facet of our operations—from asset management to leasing. We are passionate about creating positive experiences and believe in putting people first. When you become a part of South Oxford Management, you join a supportive team that values learning, encourages idea sharing, and actively engages in team building and community service activities. How You Will Contribute The Maintenance Supervisor is responsible for maintaining the physical integrity of the community, ensuring a safe and secure environment for residents, future residents, visitors, and team members. The Maintenance Supervisor collaborates closely with the Community Manager and Maintenance Technicians to ensure that all aspects of the community are well-maintained. The Maintenance Supervisor anticipates, identifies, and corrects problems affecting the community, and implements procedures to prevent such issues. The Maintenance Supervisor works diligently to cultivate resident satisfaction. This is not a live in position. Things You Will Do Leadership • Assist in the hiring, training, and supervising of all maintenance team members through a positive mentoring approach, • Lead service staff, delegate work orders, and inspect completed jobs, • Responsible for the overall appearance, condition, and functionality of all buildings and grounds, ensuring they are fully operational and consistently meet company standards Maintenance • Perform routine maintenance work orders at the community, which may include completing emergency and on-call tickets, • Schedule team members so that maintenance is available for emergency purposes around the clock, • Ensure OSHA and safety standards are followed, • Maintain accurate records regarding preventive maintenance, maintenance requests (received and completed), expenditures, apartment make-ready status, work-in-progress, etc, • Schedule and ensure all make-ready repairs and services are completed correctly and on schedule according to company policy, • Maintain an adequate inventory of spare parts and maintenance materials to handle the most common repairs and situations, • Keeping the Maintenance Shop stocked, organized, and clean, • Diagnose and perform maintenance/repairs, including but not limited to HVAC, plumbing, electrical, and pool maintenance, • Interface with contractors and vendors; depending on the property needs and secure bids for services, • Utilize maintenance management systems on computers and iPads to complete work order requests Safety • Think safety first and ensure that unsafe conditions are corrected promptly, • Be mindful of the condition of the community and initiate action to correct unsafe conditions, i.e., broken gates leading to the pool, broken steps, open holes, broken/burned-out exterior lights, • Conduct regular safety meetings with the Maintenance Team Customer Service • Always bring “service with a smile”, partnered with a "can-do" attitude, • Act as the gatekeeper of maintenance information — tracking and assigning everything from resident service requests to preventive maintenance records., • Take pride in the apartment community; visually inspect and address areas of concern, keep the community clean, and make note of service needs, • Communicate effectively with residents, future residents, visitors, vendors, and team members while presenting a positive, professional image, • Perform additional duties as assigned by the Community Manager Things You Will Need • You must have a valid driving license., • Must be able to work on-site five days a week; this role is not remote or hybrid eligible, • High School diploma or equivalent, • Three or more years of experience in property maintenance or an equivalent field., • Must be available to work a flexible schedule, including weekends, holidays, overtime, and on-call hours., • Must be able to walk the property, which includes climbing stairs., • Must be able to bend, stoop, squat, kneel, climb stairs, push, pull, reach, and carry supplies., • Stand for extended periods of time., • May be required to lift up to 50 pounds without assistance. Skills: • Experience leading and managing others., • General knowledge of all things pertaining to property maintenance., • Proficient and comfortable using computers and various software programs., • Skilled in the safe use and maintenance of hand and power tools., • Knowledgeable of pertinent laws, including EPA and OSHA regulations., • Certified Pool Operator, Universal Freon License, including R410A preferable., • Attention to detail., • Able to multitask and meet deadlines. What We Will Provide You South Oxford Management LLC provides a range of insurance options and benefits for our full-time team members. Including: • $28.00 -$30.00 per hr and eligible for overtime and bonuses, • Medical/Rx, • Dental, • Vision, • Employer Paid Life/AD&D, • Voluntary Life/AD&D, • Short Term Disability, • Long Term Disability, • Employee Assistance Program, • Accident Plan, • Hospital Indemnity Plan, • Critical Illness Plan, • Legal/ID Theft Protection, • Pet Insurance, • 401(k) Retirement w/ Match + Immediate Vesting, • Paid Holidays and Time Off (3+ weeks), • Rent Discount (30%), • Tuition Reimbursement($2,000/year), • Paid Parental Leave (4 weeks), • Employee Referral Bonus, • Employee Rewards and Recognition You’re exceptional. Let us make you feel it. Join our team. South Oxford Management LLC is proud to be an Equal Opportunity Employer EOE/M/F/D/V/SO. South Oxford utilizes E-Verify, a web-based system that enables enrolled employers to verify the eligibility of their employees to work in the United States through the U.S. Department of Homeland Security and the Social Security Administration, subject to state law requirements. South Oxford Management LLC is committed to providing a workplace that is free from the use, sale, possession, or distribution of illegal drugs and alcohol, as well as free from the abusive use of legal drugs or alcohol. All job applicants are required to take and successfully complete a drug and/or alcohol test before they will be permitted to begin employment. Applicants who refuse to take a test or do not cooperate with the test representatives will not be permitted to begin employment. If a test yields a positive result for drugs or alcohol, the Company may withdraw the offer of employment to an applicant where permitted by state law.

Job Description Summary: The Assistant Manager supports the Assistant General Manager and General Manager in the daily responsibilities required to keep the business running smoothly. The Assistant Manager directs employees and ensures that work is being completed in a timely and effective manner. **REQUIRED NYC FOOD HANDLERS LICENSE. Job Expectations: The Assistant Manager performs Leadership, Management, and Organizational tasks while supervising fellow Teammates, monitoring their performance, to ensure they comply with company and safety policies, and delegate tasks appropriately. Duties: • Follow the steps outlined in the DHC Training Program to learn and train new skills, duties, and responsibilities, • Abide by and enforce to the rules and direction given by the Restaurant Management Team and refrains from insubordination, • Communicate to their immediate Supervisor when additional training guidance and practice is needed, • Effectively and consistently does required Ops Walks and Q&A checks to correct areas of opportunity, • Organize shift schedules for Team Members and monitor attendance, tardiness, and time off, • Assign duties to specific Team Members based on role and skills, • Understand how each job responsibility impacts Guests, the Team, and overall Restaurant Operations and success, • Greet Guests, record orders, and serve food and beverages with a consistently positive and helpful attitude, including answering questions, • Ensure Shift Leaders and Team Members work together with their Teammates to prepare items on the DHC menu while following cooking instructions, safety procedures, and sanitary requirements, • Use specific kitchen machinery/equipment such as ice cream dispensers, fryers, warmers, etc., • Ensure Restaurant cleanliness is conducted daily by delegating the clearing of tables, sweeping, and mopping floors, washing/sanitizing/disinfecting kitchen utensils and high touch-point areas, and servicing restrooms, • Handle Guests’ concerns and complaints professionally and calmly to resolve problems according to Restaurant Policy, • Maintain a neat and tidy appearance by wearing a uniform and adhering to the DHC Uniform Policy, • Are performance-oriented and performance driven; understand performance expectations and are aware of performance, • results, • Provide direction, supervision, and feedback to maintain levels of high productivity and Team morale, • Communicate Shift Leader and Team Member work performance to the Restaurant Management Team and appropriately address performance issues, • Train new and current Team Members, • Balance cash drawers and prepare cash deposits as assigned by the Restaurant Management Team, • Assist the Assistant General Manager & General Manager as directed, • Effectively plan, organize, and implement all daily operational routines and activities alongside the Shift Leader, • Complete all required administrative duties and daily paperwork including required checklists, • Supervise and perform closing and/or opening activities as directed by the Restaurant Management Team, • Establish an environment of trust to ensure honest, open, and direct communication, • Role model and set a positive example for the entire Team in all aspects of business and personnel practices, • Follows all company guidelines for food and cash controls; follows all cost control guidelines to maintain and minimize Restaurant costs; properly uses all products, supplies, and equipment facilities, • Communicate effectively with Shift Leaders, Team Members and Management to resolve any interpersonal issues as needed Requirements: • Current student or high school diploma/GED preferred, • Must be at least 18 years old and fluent in English, • Certified in all stations as a Shift Leader following the DHC Training Program, • Flexibility to work nights, weekends, holidays, opening and closing shifts, • Ability to stand for long periods of time and work in a fast-paced environment, • Ability to bend and stoop and lift 50 - 75 lbs. comfortably, • Ability to work in close quarters and around heat, • Positive attitude while conducting any and all duties, • Commitment to Guest satisfaction. Looks at Restaurant Operations from a Guest’s point of view, • Effective communicator with co-workers and the Restaurant Management Team, • Excellent organization, planning, time management, delegation, and problem-solving skills Transportation & Accessibility: • Must have reliable transportation to work., • Must have telephone or other reliable method of communicating with Restaurant Management Team and co-workers About Dave's Hot Chicken Dave’s Hot Chicken was created by best friends Dave Kopushyan, Arman Oganesyan, and Tommy and Gary Rubenyan. Dave, a chef trained in Thomas Keller’s (French Laundry) organization set out to create the perfect Hot Chicken by searching, tasting, and frying. The four friends scrounged up $900 to put a tiny stand in an East Hollywood parking lot. The menu was simple, and the chicken was the star. And what chicken it is! Sourced and prepared to be the juiciest and most tender imaginable with each piece topped with Dave’s own mix of spices ranging from No Spice to “The Reaper.” Arman created Instagram buzz and the lines began to grow. Two nights later, Eater/LA showed up to see what the fuss was about. The next morning's headline read "East Hollywood's Late Night Chicken Stand Might Blow Your Mind." Almost instantly, the lines stretched around the block. A year later, the boys had the money to open a shop in a hip strip-mall with décor by local street artists, where the crowds continued to grow with wait-times of an hour and more. From there, the incredibly craveable “Hot and Spicy” varieties have created a cult following with rave reviews across the U.S. and Canada. We use eVerify to confirm U.S. Employment eligibility.

Job Description Job Summary: The Manufacturing Shop Hand is responsible for assisting skilled production personnel with the fabrication, assembly, finishing, and movement of materials throughout the manufacturing facility. This position is ideal for individuals seeking a career in metal manufacturing and fabrication. Duties / Responsibilities: • Maintain a clean and organized work environment by sweeping floors, removing scrap material, and keeping the fabrication and assembly areas orderly., • Follow work instructions, production schedules, and safety and quality standards., • Move and organize raw materials, tools, and finished products throughout the shop., • Perform basic material preparation, including cleaning, grinding, sanding, and deburring metal parts., • Assist fabricators, welders, machinists, assemblers, and finishers with daily production activities., • Operate basic hand tools and power tools safely, • Assist with the packaging, labelling, and preparation of products for shipment., • Support inventory and material handling activities as needed., • Assist with loading and unloading deliveries., • Perform other related duties as assigned by supervisor and/or management. Required Skills / Abilities: • Willingness to learn manufacturing processes and shop procedures., • Ability to follow verbal and written instructions., • Demonstrate a strong work ethic and dependable attendance., • Have a positive attitude and ability to work effectively as part of a team., • Basic mechanical aptitude., • Commitment to workplace safety and quality standards., • Ability to work in a fast-paced manufacturing environment. Education and Experience: • High School Diploma, GED, or equivalent preferred., • Previous manufacturing, warehouse, construction, or general labor experience is helpful but not required. Physical Requirements: • Capability to stand, walk, bend, stoop, and lift for extended periods of time, • Ability to lift and carry at least fifty (50) pounds., • Ability to work in an indoor or outdoor environment with exposure to noise, dust, and moving machinery. What Parabit Provides • Competitive compensation, • Company training and product-specific technical instruction, • Company vehicle, laptop, credit card, and cell phone, • Medical, dental, vision, life insurance, and supplemental benefit options, • 401(k) plan, • Paid time off, • Gym reimbursement About Parabit Headquartered on the south shore of Nassau County, New York, Parabit Systems, Inc. is an established manufacturer and integrator of security, self-service, and customer-experience solutions. Since 1995, Parabit has developed access control systems, surveillance products, kiosks, digital signage, mobile charging stations, emergency and courtesy communication equipment, and custom enclosures for customers in the financial, transportation, hospitality, retail, education, government, corporate, and healthcare markets. How to Apply Please submit your resume to Recruiting@Parabit.com and include the job market or geographic area in which you are applying. All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job DescriptionPosition Title: SBYSP Coordinator Reports To: SBYSP Manager Broad Function: Responsible for oversight and service delivery for the SBYSP Team I. CORE VALUES: • Demonstrates cultural competence through an awareness of and sensitivity towards Agency’s clients’ and coworkers’ cultural and socioeconomic characteristics i.e. is flexible in presentation of profession self, has the ability to “connect” with diverse populations, and has the skills to integrate culture throughout the clinical process with respect to race, color, creed, religion, gender, ethnicity, language, sexual orientation, age, appearance, mental and/or physical capability, etc. (*Culture is defined as membership in a group that has shared values, experiences and beliefs.), • Is committed to the value of a nurturing family as the ideal environment for a child and believes in the capacity of people to grow and change., • Works from a strengths-based perspective., • Understands and works well with other service systems (i.e.; child protective, juvenile justice, division on aging, probation and parole), maximizes resources to assist client., • Recognizes that consumers come first and responds to consumers appropriately., • Knows and adheres to all FC Policies and Procedures, participates in either the QA Committee or a Subcommittee and/or keeps abreast of and adheres to QA policies and procedures. II. PROFESSIONALISM: • Values and participates in the Team as a proactive member., • Respects others’ professional opinions and tolerates a range of feelings., • Able to give and receive constructive criticism., • Willing to take on extra work when needed (i.e. when there is a vacancy)., • Performs required tasks according to the program philosophy, policies and procedures., • Is courteous, approachable, and cooperative towards others and conducts self in a mature, competent, confident, and respectful manner., • Understands and adheres to confidentiality rights of clients, co-workers and agency, consistent with HIPAA (Health Insurance Portability and Accountability Act), and protects personal health information in written, verbal and electronic forms., • Practices self- care, has a sense of humor, and possesses a healthy work/ life balance important to providing great customer service., • Ensures the safety & comfort of others by communicating the presence of hazards, injuries, equipment problems or any need for help and knows the emergency evacuation and all other safety policies (universal precautions, etc.)., • In times of crisis is willing to help others, and communicates urgent information quickly to supervisor / Team., • Maintains good attendance (i.e. Maintains FT or PT schedule as contracted, and attendance does not impair or negatively affect the team.), • Is punctual for client appointments, meetings, etc., • Meets program productivity requirements., • Uses good judgment, practices ethical decision-making, and explores all options in problem solving. III. SUPERVISION: • Attends supervision consistently and comes prepared., • Documents supervision., • Able to receive feedback and to learn from it., • Has insight about self (i.e. strengths and weaknesses) and utilizes that knowledge toward growth and change. IV. LEADERSHIP: Coordinator Responsibilities: • Responsible for day to day management of SBYSP., • Report and update Manager and Director of Programs on the status of program (s)., • Facilitate SBYSP team meetings, Case Conferences and CAB (Community Advisory Board) meetings and keep minutes of each meeting., • Provide supervision and oversight of SBYS program staff., • Manage and assist in program related training needs and issues to ensure continuity of quality in program., • Assess and address risk management concerns and issues according to agency policies., • Assist the Human Resources Manager with the hiring, training, disciplining, evaluating, and motivating clinical staff., • Manage all program budget and finance affairs in conjunction with the Program Manger, Director of Programs, Finance Team and CFO., • Shop for program via online or in person as needed to ensure uninterrupted services and continuous running of program (s)., • Commitment to the Quality Improvement process, including participation on the steering committee and at least one sub-committee. As well as supporting program staff participation., • Provide clinical and crisis stabilization services., • Committed to empowering students and their families to solve their own problems and to the value of a nurturing family as the ideal environment for a child., • Refer students and their families to appropriate services., • Manage and input data into multiple databases including but not limited to the agency ECR (Netsmart), funder database (Salesforce/Connex) and ensure all information is entered accurately and within agency and funder given timeframes., • Collaborate with school and local community for events and activities to provide most comprehensive services., • Interface with school administration, guidance, CST, and any other appropriate school district staff regularly to promote continued relationships, collaborative efforts and growth of the SBYSP., • Market program in the school and community., • Complete all required paperwork in a timely fashion including but not limited to, Record Reviews, Quarterly funder reports, yearly contract documents, QI documents, monthly calendars, school district advertisements, and other program and agency related items., • Demonstrate timely attendance to all required meetings and participate as a part of the interdisciplinary team., • Attend all State funder required meetings as scheduled., • Demonstrate cultural competence through an awareness of and sensitivity towards Agency’s clients’ and coworkers’ cultural and socioeconomic characteristics i.e. is flexible in presentation of profession self, has the ability to “connect” with diverse populations, and has the skills to integrate culture* throughout the clinical process with respect to race, color, creed, religion, gender, ethnicity, language, sexual orientation, age, appearance, mental and/or physical capability, etc., • Review, sign and adhere to the Agency’s HIPPA/Confidentiality requirements, as outlined in the Agency’s Confidentiality Agreement., • Be familiar with and adhere to all Agency Policies and Procedures and Family Connections’ Core Values., • Perform other duties as required. V. CLINICAL: 1. Provide clinical services as described in Clinician Job Description., 2. Carry Clinical Caseload and provide coverage support as needed. Specifications: Education: Master’s in social work, counseling or equivalent master’s in human services. LSW, LAC, LPC LCSW or state licensure/certification specific to program requirement. Experience: Two years’ supervisory experience in the mental health field working with children and families in the community. Experience with diverse populations in an urban setting. Knowledge: Knowledge of psychiatric disorders and various treatment modalities, including group, family and individual treatment. Knowledge of community resources, social service, and mental health systems. Knowledge of appropriate clinical interventions in a crisis and non-crisis situation. Knowledge of appropriate treatment interventions for victims of sexual abuse, individuals suffering from post-traumatic stress disorder, juvenile sexual offenders. Knowledge of Family Systems Theory. Skills & Abilities: Ability to conduct psychiatric and psychosocial assessments and to make a differential diagnosis. Ability to provide clients with assistance in obtaining concrete services. Ability to create a case formulation and treatment plan. Ability to assess children and families for sexual and physical abuse. Good written and oral communications skills. Ability to create a warm, non-threatening therapeutic atmosphere. Ability to set limits with clients. Willingness to work with individuals from diverse backgrounds. Understanding of professional ethics and issues of confidentiality. Ability to work on a multi-disciplinary team. Ability to provide clinical and programmatic support and supervision. Salary: $68,000 Location: 7 Burnet St Maplewood, NJ, 07040 or 400 Central Ave, Orange, NJ, 07050 Vacation & Benefits: • Vacation: As a full-time employee working generally 35 hours per week, you will be eligible to participate in the Family Connections group benefit plans. Benefits include medical, dental, life insurance, long term disability, retirement plans, and additional supplementary benefits. Yes, you can elect to not enroll into these benefits. You will also be eligible to accrue vacation, personal, and sick days in addition to 12 paid holidays, and summer wellness Fridays., • Benefits also include professional development assistance, referral program, internal/external trainings, Capella University partnership, 403b retirement plan with employer matching (3% max) (you can enroll in your 403b without a waiting period) , employer-paid life insurance, employer paid Long-term Disability (LTD) insurance, employer paid Accidental Death & Dismemberment (AD&D) insurance, etc., • Work Environment/Physical Demands: The individual must possess the ability to perform work that requires frequent standing, bending, reaching, squatting, kneeling, moving, and lifting of up to or in excess of 50 pounds. A flexible working schedule with 5 days per week evening availability. Some working time is spent out of the office transporting children and/or parents to and from visits and observing visits in families’ homes or in the community (parks, libraries, restaurants, jails, etc.). Family Connections is an Equal Employment Opportunity Employer committed to excellence. Employment offers are made on the basis of qualifications and without regard to race, sex, religion, national or ethnic origin, disability, age veteran status, or sexual orientation or other protected classes under the State and Federal law. Family Connections is an Equal Employment Opportunity Employer committed to excellence. Employment offers are made on the basis of qualifications and without regard to race, sex, religion, national or ethnic origin, disability, age veteran status, or sexual orientation or other protected classes under the State and Federal law. Family Connections participates in E-Verify and will provide the federal government with information from each new employee’s Form I-9 to confirm authorization to work in the United States. Candidates must be authorized to work in the United States and eligible for full‑time employment on a W‑2 basis. This role must be performed in a manner that is fully compliant with all applicable federal, state, and local employment laws, including those of the State of New Jersey. C2C, 1099, or other non‑W‑2 arrangements are not eligible for consideration. Powered by JazzHR E66jezKN1n

Job Description Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are searching for a Service Manager for our Linden, NJ facility to manage internal personnel and operations in a manner that provides for the optimization of resources and delivers world class customer service, resulting in the achievement of branch performance goals. This is a working Supervisor position. Essential Job functions: • Interact with customers, assessing their service needs and quoting work as requested, • Delegate workloads and actively support growth., • Oversee the open order aging report ensuring final invoices are presented timely with every repair., • Oversee the scheduling and work flow through the shop., • Ensure employees are qualified to perform the work being assigned, • Interpret and insure that all NTTC, ASME/National Board and CFR regulations are followed., • Develop and maintain a high level of product knowledge within your staff., • Evaluate employee’s skills and recommend training as required., • Review and present requisitions when additional tooling is required., • Maintain appropriate departmental staffing in balance with branches requirements., • Provide daily reporting and all other duties assigned by the Branch Manage., • Advise and assist in the hiring process for department staff., • Conduct performance evaluations annually or as required for department staff., • Know and enforce company policies and procedures. Skill Requirements: • Excellent oral and written communication and interpersonal skills., • Highly analytical and well organized, proficient with the use of computers and related software, customer service oriented; and, • Have strong decision-making, problem solving and time management skills., • Must be ethical in all job related activities., • 5 years’ experience in parts, fleets, and tank trailer service/repair preferred., • Degree in Operations Management or other business-related discipline is preferred., • Strong attention to detail when overseeing testing and completing required documentation, • Problem-solving: essential to solve all the complex puzzles that stand between you and the perfect mechanical product/device/system DCI Benefits: • Medical, Dental and Vision Insurance, • 401(k) with generous employer match, • Paid time off, • 10 Paid holidays, • Optional Health savings account & Flexible spending account, • Life insurance, • Parental leave, • Tuition reimbursement

Job Description FUNCTIONAL ROLE: This individual is responsible or a variety of duties in support of the functional areas of Sales, Operations and Finance. The support role includes assembling operational data, entry into either proprietary spreadsheets or ERP systems such as Visual Shop or QuickBooks, and submitting the completed work on time per scheduled deadlines. The Business Support Supervisor is highly proficient in office protocols and has expert knowledge in spreadsheets, database structure and ERP systems in general. The individual will contribute to a positive team atmosphere and follow policies and guidelines in a consistent manner. This position provides day-to-day assistance to the President and may include duties ranging from customer contact to human resource involvement requiring the strictest confidentiality. Communications with senior staff and general management are to be fulfilled as required to assist and ensure the operational targets for throughput, On-Time Delivery and customer specifications are met. REQUIREMENTS: Education: • Bachelor’s Degree in Human Resource Management, Business or equivalent work experience in Administration or Office Management. Experience: • Minimum of 4 years’ experience in an office environment serving as personal assistant or office manager. Includes customer service, secretarial or administrative roles. DUTIES AND RESPONSIBILITIES: • Complete customer invoicing on a daily basis., • Arrange, organize order shipment. Includes paperwork, logistics arrangements, notifications and invoicing as required by the customer purchase order., • Open and distribute incoming mail., • Distribute weekly payroll checks., • Assist the Quotations Specialist in typing, copying, filing and submitting customer RFQ’s., • Enter Restoration work into the Private Ticket Orders database. Maintain the database as orders are completed and payments received., • Assist with Contract Review, Order Entry and Route Control., • Perform the steps necessary as defined in the Collections SOP to call and collect on past due A/R., • Enter A/R receipts into Visual Shop and QuickBooks ERP systems., • Make remote deposits of all A/R receipts., • Issue Monthly Statements to all A/R accounts., • Collect operational data for the Weekly Management Flash Report, preparing the KPI metrics., • Assist in the Purchasing function as requested., • Complete Grant Requests and Applications to the State of New York and Federal programs at the request and direction of the President., • Answer phones and keep the messaging current., • Serve as backup IT on-site designate., • Complete customer surveys to maintain good standing with all purchasing and quality systems.\nCompany Description Want to come join an established that has been around for 97 years? A Successful, long standing company who services many sectors, such as aerospace, military, automotive, space, medical, machining, restoration and so much more. With over 30 different finishes and services such as nond-destructive testing, painting, anodize, electroplating, polishing, sateening, grinding and more. There are endless opportunities to grow and excel within the company. Nassau Chrome offers long standing careers to employees who want to be a team player, and take pride in their work. Everyday is a new challenge, a new job and different work – not mundane or repetitive. Want to come join an established that has been around for 97 years? A Successful, long standing company who services many sectors, such as aerospace, military, automotive, space, medical, machining, restoration and so much more. With over 30 different finishes and services such as nond-destructive testing, painting, anodize, electroplating, polishing, sateening, grinding and more. There are endless opportunities to grow and excel within the company. Nassau Chrome offers long standing careers to employees who want to be a team player, and take pride in their work. Everyday is a new challenge, a new job and different work – not mundane or repetitive.

Job Description Transitional Services for New York, Inc., not-for profit, is a comprehensive, community-based mental health organization located in New York City. We provide a continuum of rehabilitative services to enrich the lives of those recovering from mental illness and facilitate their transition to increased levels of independence. Transitional Services for New York, Inc. envisions broadening its rehabilitative services and becoming a regional social service provider. Transitional Services for New York Staff will deliver effective programs with compassion, integrity, and professionalism. We expect all staff to put our clients’ needs first while respecting ourselves and each other as we provide hope to those who participate in our programs. Counselor (Mental Health) $24.72 Per Hour, Part-time TSINY, a non-profit Mental Health Services Agency seeks Counselor for its Residential Program, located in Queens Village, NY. Valid Driver License Required Position Summary Provide direct care services to assigned caseload. Work hands on with residents on learning daily living skills, such as personal hygiene, laundry, budgeting and room maintenance. Accompany residents on medical and benefits appointments and off-site recreational activities. Meet with caseload individually for weekly sessions. Conduct clothing inventory and shop for seasonal clothing. Essential Functions • Converse with shift going off duty for any pertinent information, i.e., appointments, overall residents’ behaviors, changes in medication, etc., • Supervise morning, afternoon and evening medication. Initial medication book immediately after each individual medication is given to a resident., • Alert day programs of resident's absence and lateness if resident has an appointment., • Complete change of shift checklist form to include: a. medication counts of controlled substance b. receipt of correct number of residents in the residence c. count correct number of charts in the file d. location of Agency vehicle e. correct number of house keys f. receipt of valuables in the house, i.e., TV, VCR, copy machine, etc. • Check staff revised schedules., • Check personal mailbox., • Assist residents with meal preparation when needed., • Report any pertinent information regarding residents and facility to shift supervisor throughout your shift., • Document in Communication Log any pertinent information regarding residents., • Meet with assigned caseload as scheduled., • Document all sessions on progress notes., • Maintain residents’ charts in accordance with Agency and OMH requirements and standards., • Meet with supervisor as scheduled., • Meet with all caseload residents to discuss all outstanding and ongoing issues., • Ensure all caseload residents have sufficient medication., • Escort residents to appointments if assigned (check appointment book or calendar)., • Escort residents shopping for personal needs., • Write Medicaid Progress Notes reflecting restorative services., • Begin status change form immediately upon hospitalization or other change of status and forward to Program Director, IDF Unit., • Visit hospitalized residents weekly., • Participate and supervise residents during fire drills., • Participate in Community Meetings., • Participate in staff meetings., • Complete quarterly ADL assessment for all caseload residents., • Participate in quarterly service plan review assessment and development., • Thoroughly inspect assigned residents' rooms for safety measures and report any damages or problems to shift supervisor., • Escort residents to Social Security office., • Escort residents shopping for new clothing (fall/winter and spring/summer)., • Functional assessment completed., • CPR/First Aid training, • Check to see that all of assigned residents have had their annual physical and dental check-ups., • Submit receipts for petty cash spent., • Inform residents of appointments., • Conduct and document room checks as needed., • Attend special on-site and off-site training, seminars, conferences, etc., • Check revised schedules for possible changes in hours/shifts and for holiday coverage., • Assist residents in completing Home Leave forms., • Make sure residents are dressed appropriately before leaving the facility., • Supervise kitchen activities (cooking, serving, clean-up) to ensure safety, health and cleanliness, as needed., • Assume Med/Shift Supervisor responsibilities as scheduled/needed., • Be able to sit or stand as needed, with or without reasonable accommodation., • May require walking, primarily on a level surface, for short periods throughout the day, with or without reasonable accommodation., • Be able to reach above shoulder heights, below the waist or lift as required to file documents or store materials throughout the workday, with or without reasonable accommodation., • Driver’s license required., • During a declared disaster, assume and adhere to assigned Job Action role(s) consistent with Disaster Preparedness Plan., • Perform other related duties as required. Experience/Education/Skills/Abilities High School diploma. TSINY is an equal opportunity employer that is committed to a policy of nondiscrimination in accordance with Title VII of the Civil Rights Act, as well as the New York State Human Rights Law. TSINY prohibits discrimination against any employee or applicant for employment on the basis of race, creed, color, national origin, sex, gender, age, disability, marital status, sexual orientation, citizenship status, veteran status or other protected group status as provided by law in all employment decisions.

Job Description SITE SUPERVISOR - NYC Reports To General Superintendent Manages Subcontractor crew for installation Summary/Objective The Site Supervisor will provide onsite management, direct installation subcontractors effectively, plan installation sequences, obtain field dimensions, and complete our onsite presence safely. Manage onsite communication acting as the company representative and liaison between client, general contractor, and installers. To oversee safety best practices including daily JHA reporting, routine safety inspections, compliance with site safety program, and enforcing proper PPE. Ensure project schedule is being maintained and prepare two look-aheads. Understand the project scope and responsibilities of each vendor and subcontractor and demand the highest level of quality control. Adequately protect all existing finishes from damage and be responsible for making sure daily housekeeping is satisfactory. Primary Responsibilities/Functions • Planning and executing all installation of products onsite for specific projects., • Planning safety techniques/requirements, OSHA., • Completing and submitting any safety forms, onsite required documentation., • Taking field dimensions or assisting in coordination of field dimension., • Enforcing quality standards., • Daily reporting documentation. Required Skills/Attributes • Must have strong leadership skills to oversee and manage subcontracted installation crews, • Must have people skills in order to effectively communicate project progress and details with onsite client project managers and superintendents Required Education/Experience • High School Diploma, • 5 years industry experience minimum Required Certifications/Licenses • OSHA 30 Position KPIs • ZERO accidents and safety violations, • 100% attendance at site safety meetings, • 100% attendance at daily/weekly GC coordination meetings, • ZERO tickets signed for subcontractors unless authorized by Project Management, • 100% enforcement of quality control program and strive for ZERO Punchlist Work Environment While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration when on a job site or in the shop, and may be exposed to shop conditions, ongoing construction and various weather conditions The noise level in the work environment can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit, talk and hear. The employee is frequently required to use hands to finger, handle or feel. The employee is required to reach with hands and arms. The employee is required to climb, balance, stoop, kneel, stand, crouch or crawl for prolonged periods. The employee must also lift and move up to 50 pounds. The employee is required to use one or two hands to grasp, move, or assemble objects. Use muscles to lift, push, pull, or carry heavy objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Personal Protective Equipment Utilize PP&E in compliance with OSHA standard and per site specific safety programs. Position Type/Expected Hours of Work This is a full-time position (40 hours). Workdays are Monday through Friday, work times are dependent on department, projects, and supervisor’s request and approval. Off-hours work is occasionally required to adhere to site restrictions and project schedule. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Travel This position requires extensive travel throughout the United States, being located 6-24 months at a time on each project before moving on. The position can travel up to 100% of the year. Benefits & Incentives • Insurance, • Medical 100% sponsored by employer, • HSA with Company contribution, • Flexible Spending Accounts, • Vision, • Dental, • Life & AD&D policy 100% sponsored by employer, • Short term disability 100% sponsored by employer, • EAP, • Voluntary add-on policies & eligibility, • 401(k) with generous company match, • Paid Time Off, • PTO with rollover potential, • Bereavement, • Jury Duty, • 9 Paid Holidays, • New Years Day, • Synergi Day, • Good Friday, • Memorial Day, • Independence Day, • Labor Day, • Thanksgiving, • Friday after Thanksgiving, • Christmas, • Wellness Benefits, • Continued Education/Professional Development Allowances Company Culture & Perks • Career growth & development, • Giving back initiatives to the community, • Employee recognition programs, • Happy hours, • Company parties, celebrations, and catered lunches regularly throughout the year, • Raffles, trivia, etc. throughout the year with prizes, • Lunch & learns, • Quarterly team building, • Quarterly company updates from CEO