Shop jobs in Pueblo, ColoradoCreate job alerts

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking a Mill Electrical Technician to join our team at our plant located in Pueblo, Colorado. As a Mill Electrical Technician (MET), you will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • $32.51 - Mill Electrical Technician - Trainee - must have the equivalence in one of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • $35.19 - Mill Electrical Technician - Starter - must have the equivalence in two of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • $ 38.25 to $45.00 per hour depending on experience - Mill Electrical Technician - Standard - must posses an electrical journeyman license or equivalent education/experience., • Relocation Assistance available between $5,000- $10,000 depending on location, • Shift differential, • Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification, • Complete the RMSM training program to become skilled in all three of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Must have completed or have the equivalence of a craft apprenticeship in one of the following three crafts: Combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • 1 - 3 years of experience as an electrician in heavy industry, manufacturing, or mining; experience working with machinery, overhead cranes, equipment operation or a closely related field preferred, • Valid Colorado license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH Open & Closing Dates: 8/1/2025 - 12/1/2025 The above statement reflects the general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. We are seeking a Mill Electrical Technician Assistant to join our team at our plant located in Pueblo, Colorado. The Mill Electrical Technician (MET) Assistant will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification, • Complete the RMSM training program to become skilled in all three of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Operation of overhead cranes, • Attend courses and assessments to become skilled in one of the three crafts, as defined by the training program, • Obtain and maintain OSHA 10 and equipment certifications, as required Requirements • Associates Degree or 2 years of experience in applicable field, • Valid Colorado's license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH Open & Closing Dates: 8/1/2025 - 12/1/2025 The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Compensation • $29.07 per hour, • Shift differential Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking a Mill Electrical Technician to join our team at our plant located in Pueblo, Colorado. As a Mill Electrical Technician (MET), you will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • $32.51 - Mill Electrical Technician - Trainee - must have the equivalence in one of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • $35.19 - Mill Electrical Technician - Starter - must have the equivalence in two of three crafts which include combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • $38.25 to $45.00 per hour depending on experience - Mill Electrical Technician - Standard - must possess an electrical journeyman license or equivalent education/experience., • Relocation Assistance available between $5,000- $10,000 depending on location, • Shift differential, • Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification, • Complete the RMSM training program to become skilled in all three of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Must have completed or have the equivalence of a craft apprenticeship in one of the following three crafts: Combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • 1 - 3 years of experience as an electrician in heavy industry, manufacturing, or mining; experience working with machinery, overhead cranes, equipment operation or a closely related field preferred, • Valid Colorado license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH Open & Closing Dates: 8/1/2025 - 12/1/2025 The above statement reflects the general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. We are seeking Machinist to join our Maintenance team at our Pueblo, Colorado location. As a machinist you will machine, disassemble and assemble parts for equipment and machines in a safe manner. This position reports to the Maintenance Superintendent. • Use lathes, milling machines, vertical and horizontal boring mills, shapers/slotter machines, surface and cylindrical grinders, radial drill presses, appropriate hand, power and measuring tools, radio controlled overhead cranes, fork lifts, presses and all other shop equipment, • Work Bench-floor & field work, including alignments, • Utilize materials which include castings, forgings, bar stock flats and rounds, • Read prints and drawings, layout and plan work according to blueprints, and select proper materials and machines necessary for precision machining of product, • Test, inspect, dismantle, assemble and repair machined product accurately while making provisions for handling of materials, equipment and tools when needed, • Observe all safety rules and LOTO procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assists Maintenance personnel, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, oils solvents, and oil based products, extreme cold and heat; close proximity to moving parts, chips, shavings, scale, and sharp tools, • Obtain and maintain OSHA 10 and equipment certifications, as required, • Machinist Apprenticeship, AAS degree in Machining Technology or equivalent in an applicable field, • 1 - 3 years of experience in fabrication and welding in heavy industry, manufacturing, or mining; experience working with machinery, equipment operation or a closely related field preferred, • Demonstrated proficiency in all categories of Machining Technology, including critical alignments and sophisticated measuring tools, • Ability to perform installation and set-up of "Class 5" bearings & Babbitt Bearing Fits, • Competent in manipulating numbers, quantities, shapes and spaces; able to take precise measurements and calculate necessary dimensions, • Ability to repair machinery required in operating departments and roll shops, • Valid Colorado Drivers License, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to constantly exert forces up to 50 pounds and frequently exert forces up to 100 pounds to lift, carry, push and pull, • $32.97 per hour, • Shift differential #TAH Open & Closing Dates: 8/1/2025 - 12/1/2025 Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Responsibilities As a Quality Assurance Technician, you will verify product conformance to Rocky Mountain Steel Mills standard requirements and customer specifications using non-destructive testing methods, gauges, and visual inspection. You will investigate routine metallurgical problems, determine compliance with specifications and evaluate products utilizing microscope, hardness, and tensile machines. You will prepare samples using lathes grinders, cut-off machines, power saws, drill presses, milling and turning machines, polishing equipment, and measuring tools. You will work with various measuring devices, hand tools, materials, supplies, equipment, and necessary safety equipment. The ideal candidate will demonstrate a high regard for safety. • Measure and visually inspect for adherence to process sheets, standard practices and specifications, • Verify, audit, identify and record product and equipment, • Review process sheets for customer order requirements, • Operates all equipment needed to complete the job which may include grinders, cutting torch, gauges, mobile equipment, and robotics, • Assist operators in change overs, • Reject, determine, disposition, sort and identify product, • Prepare necessary reports, records and counts for traceability and inventory purpose, • Keeps work area and equipment clean and orderly, • Perform duties as needed in keeping mill operational, including routine maintenance and assists Maintenance personnel, • Adhere to all appropriate Standard Operating Procedures, • Utilize necessary safety equipment and observe all safety rules and lock out procedures Job Requirements • Possess an understanding of the basic manufacturing process and familiarity with heavy industry, manufacturing, or mining; or a closely related field, • Competent in manipulating numbers, quantities, shapes and spaces; able to take simple measurements and perform basic mathematical operations (e.g., addition, subtraction, division, decimals, fractions), • Ability to accurately read precision measurement tools, experience with gauges, micrometers, NDT flaw detectors and machine shop equipment, • Qualified Level I non-destructive testing background or equivalent preferred, • Quality control experience in a manufacturing and metallurgical background; knowledge of ISO standards, preferred, • Must meet and maintain Inspector entry level qualifications concerning literacy, experience, training, testing, courses and certification, • Ability to safely and appropriately operate, power and hand tools, machinery, and mobile equipment; 12 months experience preferred, • Obtain and maintain safety and equipment certifications, as required, • Ability to convey and understand information effectively and safely, including speaking over a public address system, • Ability to work in both inside and outside environmental conditions, with exposure to elevated noise levels, extreme heat and cold, physical hazards - close proximity to moving parts, hot surfaces, pinch points, sparks, sharp edges, high pressure air, oxygen and gas lines (atmospheric conditions may require the use of a respirator), • Must be able to work in a physically demanding manufacturing environment, which will include but not be limited to repetition, climbing, kneeling, standing, crawling, consistent exertion of forces up to 50 pounds or more, • Valid driver's license preferred - required for certain positions within the scope of Quality Assurance, • Must be willing to work varied shifts (3 shift rotation) and any days of the week, • Must be 18 years of age, • Qualified Candidates will be required to demonstrate proficiency through testing #TAH The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be constructed as a detailed description of all of the work requirements that may be inherent in the job. Compensation • $28.35 per hour, • Shift differential Open & Closing Dates: 8/1/25 - 12/1/25 Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. The Sr. Process Engineer is the technical process expert for multiple mills and provides technical support for multiple process engineers, quality, operations, and maintenance as appropriate. This includes multiple mills and operations through technical support, advanced process optimization, and Six Sigma project definition, oversight and project management. This role is responsible for collaborating with senior operations, quality, engineering and maintenance in identifying and executing opportunities for process improvements. The Sr. Process Engineer assists with process control, capital improvements and initial product performance evaluations. This position is responsible for ensuring process engineers and teams are using proper methods in the development of process control solutions and continuous process improvement. Job Summary and Responsibilities • Focuses on process improvement (continuous approvement) efforts to improve product quality for multiple manufacturing lines and mills, • Design, and/or optimize, and implement process control systems for multiple manufacturing lines and mills, • Develops daily, monthly and annual operational reports such as KPIs, COPQs, product/process capability assessments, and requirements for manufacturing lines along with process improvements, • Collaborates with quality assurance and operations teams to ensure that shop floor documents and training identify the necessary features of process control (targets, tolerances, frequency of measurement, etc.) to maintain process control systems and strategies, • Supports product development activities working with mill process engineers, quality, operations, and R&D when required, • Attends Six Sigma, lean manufacturing and process control conferences to stay abreast of process control techniques, advancements in the broader steel manufacturing industry, • Recommends capital investments to improve processes capability and leverage new technologies and assist in implementation as applicable, • Master's degree in Engineering, Metallurgical Engineering or Materials Science required, PhD degree preferred, • Minimum of 10 years' experience working in data driven process improvement, • Experience in steelmaking with melting and casting expertise, • Experience in MS Excel, Minitab, or other statistical software packages to analyze numerical data and draw conclusions, • Experience working with interdepartmental teams at all levels up to management to accomplishing tasks, • Experience with programming including SQL, visual basic and IBA analysis tools a plus, • Demonstrated experience in advanced statistical analysis techniques (MSA, ANOVA, SPC, Regression, forecasting tools and designed experiments), • Demonstrated experience in applying root cause problem solving methods (Ford 8D, Ishikawa diagrams, Failure Mode Effects Analysis, etc.) in manufacturing #TAS COMPENSATION $110,000 - $125,000 Open & Closing Dates: 9/18/2025 - 10/30/2025 Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Description and Responsibilities We are seeking a Mill Electrical Technician to join our team at our plant located in Pueblo, Colorado. As a Mill Electrical Technician (MET), you will provide all necessary electrical, electronic and combustion-instrumentation maintenance to all areas of the Mill in a safe and efficient manner. This position reports to the Superintendent of Maintenance. • Serve the function(s) of a Combustion-Instrumentation Technician, Electronic Repairman and/or Electrical Inspector (Maintenance Electrician) depending upon training and certification, • Complete the RMSM training program to become skilled in all three of the crafts mentioned above, • Troubleshoot, repair, dismantle, assemble and install a variety of equipment throughout the mill, • Work with Electric Shop, Combustion Lab and Electronic Shop equipment and tools, mobile equipment of every kind, controls, switches, valves, ovens, furnaces, machinery, cranes, prints and drawings, • Observe lockout procedures, • Keep work area and equipment clean and orderly, • Perform routine maintenance and assisting Maintenance personnel, • Operate overhead cranes as needed, • Work in both inside and outside environmental conditions, while exposed to elevated noise levels, vibrations, extreme cold and heat; conditions which require use of a respirator or dust mask; in close proximity to moving parts, electrical currents; working on scaffolding and high places; exposure to natural gas, high heat, hot surfaces, molten metal, chemicals, oils and lubricants, • Obtain and maintain OSHA 10 and equipment certifications, as required Requirements • Must have completed or have the equivalence of a craft apprenticeship in one of the following three crafts: Combustion-Instrumentation Technician, Electronic Repairman and Electrical Inspector (Maintenance Electrician), • 1 - 3 years of experience as an electrician in heavy industry, manufacturing, or mining; experience working with machinery, overhead cranes, equipment operation or a closely related field preferred, • Valid Colorado's license and mobile equipment qualification, • Strong troubleshooting, repair and installation skills, • Must be a self-starter with the ability to work with minimal supervision and manage your time when given multiple tasks, • Must have excellent interpersonal communication skills and the ability to collaborate effectively with all levels of personnel, • Physical ability to climb, walk, balance, stoop, kneel, crouch, crawl, make repetitive motions, hear, etc. and the ability to lift up to 75 pounds, • Qualified Candidates will be required to demonstrate proficiency through testing The above statement reflects the general details considered necessary to describe the principal functions of the job identified, and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. • $38.25 to $45.00 per hour depending on experience, • Shift differential #TAH Open & Closing Dates: 8/1/2025 - 12/1/2025 Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job DescriptionAt CF&I Steel, L.P., our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. We are seeking a Melting Supervisor to join our Steelmaking team located in Pueblo, Colorado. The Melting Supervisor is responsible for leading and motivating personnel toward higher levels of safety, environmental cleanliness, quality and production through strict adherence of the Rocky Mountain Steel Mills Business Plan and core values • Directly, responsible for supervising and motivating a team of Electric Furnace and Casting personnel in the production of various sizes and grades of rounds from the Demag Caster., • Communicates and supports a safe and positive working environment for all personnel, • Ensures that all employees are working safely and following all the company policies, procedures and practices, • Assists with the operations and flow of the Melt Shop in all areas, including the Furnace, LRF and VTD, • Delivers appropriate training in the development of competent and a motivated and cross trained workforce, • Provides daily update reports and operational progress to management, • Participates in the development and implementation of safety, quality and cost improvement activities focused on achieving the Business Plan and AIPs Requirements • Bachelor's degree and/or equivalent work experience, • Minimum 5 years' experience in steelmaking; Metallurgy preferred, • Ability to work in a team environment with proven interpersonal skills, • Strong leadership and managerial skills, • Strong problem-solving and proven decision making skills, • Proven written and verbal communication skills, • Good organizational and time management skills, • Ability to multitask, • Highly motivated and a self-starter, • Ability to interact with all levels of our organization, • Proficient in Excel, Word and Oracle, • Strong mechanical aptitude, • Experience in the management of 6S projects #TAS Compensation Our total compensation package includes amazing benefits! • Competitive wages and bonus opportunities, • Family medical, dental, and prescription coverage at minimal employee cost, • Short and long term disability programs, • Competitive retirement plans, • Flexible Spending and Health Savings Accounts, • Employer-provided and Voluntary Life Insurance options, • Paid vacation and recognized statutory holidays, • Apprenticeship and career advancement within the company, • Tuition reimbursement, • Wellness program All applicants must be eligible to work in the USA. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer Orion Steel Group, L.L.C. is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Orion Steel Group, L.L.C. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail or call: (312) 533-3577. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

Job Description Responsibilities The Service Foreman ensures that qualified diesel mechanics perform repairs correctly and efficiently and that the service department maintains a consistently high level of customer satisfaction. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Recruit, hire, and motivate qualified diesel mechanics., • Assist mechanics in developing their skills with support of the Service Manager., • Schedule repair work and assign technician(s) to mechanical segments that match their skill level to ensure quality., • Ensure that all repairs are assigned to mechanics in an equal and fair manner., • Provide technical support for mechanics when necessary., • Check progress (W-I-P) of each repair order throughout the day., • Maintain high-quality repairs and minimizes comebacks. Conduct periodic spot checks of completed jobs for thoroughness and quality., • Road test vehicles to quality-check work performed., • Monitor mechanics’ daily productivity reports and corresponding payroll records. Benefits: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • Two year’s related shop and technician supervision experience., • Commercial driver’s license and insurability with Company’s carrier. This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description We will pay for your tool box move! We offer flexible shifts including 4 10's We give wage incentives for technicians holding a current CDE certification McCandless Truck Center is one of the region's premier Commercial Truck Sales & Leasing Dealerships, proudly serving the Pueblo area for many years. Our team enjoys a fantastic culture and opportunities for advancement, which are company-wide focused to help you grow both personally and professionally. We're interested in helping you establish and build a long-term career with us, because we know that happy employees lead to happier customers! What We Offer: • Health Insurance - 80% of employee premiums are company paid!, • Free Dental & Vision insurance for employees!, • Life Insurance Policy, • 401(k) plan with company match, • PTO and Vacation Days, • Training SUMMARY Functions as an experienced technician who is able to perform diagnoses and repairs of most vehicle components with little supervision required. ESSENTIAL DUTIES Essential Duties include the following. Other duties may be assigned. Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards. Diagnoses cause of most malfunctions and performs repair. Communicates with parts department to obtain needed parts. Saves and tags parts of the job if under warranty or if requested by the customer. Examines assigned vehicle to determine if further safety or service work is required or recommended. Communicates with service advisor immediately if additional work is needed, if work outlined is not needed, or if repairs cannot be completed within the promised time. Documents all work performed and recommended on the repair order. Road tests vehicles when required or refers to the test technician. Participates in manufacturer-sponsored training programs, schools, and events. Keeps abreast of manufacturer technical bulletins. Supervises work of any apprentice technicians as assigned. Reports machinery defects or malfunctions to supervisor. Ensures that customers' cars are kept clean. Notifies service advisor immediately of anything that has happened to change the appearance or condition of the vehicle. Keeps shop area neat and clean. Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as they were received. Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Operates all tools and equipment in a safe manner. Reports any safety issues immediately to management. MARGINAL DUTIES As assigned. EDUCATION and/or EXPERIENCE Half of the certifications of a master certified technician depending on area of expertise CDL PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; use hands to finger, handle, or feel; and climb or balance WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job; the employee is occasionally exposed to: • Wet and/or humid conditions, • Moving mechanical parts, • Fumes or airborne particles, • Toxic or caustic chemicals, • Outdoor weather conditions, • Extreme heat, • Risk of electrical shock $22.00 to $55.50

Job Description Job Description Check out who we are! Job Title: Sr. Machinist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Reimbursement Relocation Assistance Available) Remote: On-Site Pay Range: $27.25-$30 Hourly About Gulftech international Our companies are the world’s recognized leaders in the engineering, manufacture, lease, sale, and service of industrial equipment and components serving food production and processing companies. Gulftech’s family of companies touches 90% of the world’s fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers each of which is the leader in their respective markets throughout the world. Job Summary Efficiently, effectively, safely, and independently set up, adjust, troubleshoot, and operate a variety of MANUAL MACHINE TOOLS including lathes and mills producing parts to exacting tolerances and dimensions at production rate (very tight tolerancing) This is a low-volume and high mix production environment. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): • Interpret complicated blueprints, sketches, and engineering specifications., • Determine the sequence of operations, number of cuts required, and method of setup., • Select, mount, and align various specialized machine attachments and standard or improvised tooling., • Make necessary and correct machine adjustments to improper machine functioning or cutting action., • Measure, mark, and scribe dimensions and reference points on material or work pieces as guides., • Calculate and set controls to regulate machining factors, such as speed, feed, coolant flow, and depth/angle of cut., • Accurately monitor and verify quality in accordance with statistical processes or other control procedures., • Use a variety of machinist hand tools and precision measuring instruments., • Understand materials and applications as required., • Solve problems relative to the work-holding arrangement, unusual materials, machine setting, tools, product specifications, and fabrication methods for the production process., • Align and fasten work using standard fixtures and established methods., • Install and adjust cutting tools consistent with the type and size of material being machined., • Adjust feeds, speeds, and depth of cut to machine quality parts, per documentation., • Inspect parts for conformance to specifications using measuring instruments such as gages, calipers, micrometers, and comparators., • Visually inspect parts for burrs or damage machined surfaces., • Maintain equipment to ensure cleanliness, accuracy, and reliability specific to requirements., • Implement lean initiatives by identifying and providing suggestions on areas for improvement., • Effectively apply lean concepts and tools in the work area., • Observe all company policies and procedures, including safety rules, and maintain a clean and orderly work area. Benefits and Compensation • Two medical plans (PPO & HSA), dental, and vision insurance, • Paid time off, Vacation, and eight Holidays, • Employee assistance program (EAP), • 401k, • Profit sharing, • Free Life, • Free AD&D, • Free Disability insurance (Shot and Long-Term Disability), • Tuition Assistance, • Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Job Description Job Summary As a Truck Service Advisor (TSA), you will provide first-rate service to customers through your extensive knowledge of the products we sell and the services we provide. The TSA is primarily responsible for writing work orders, suggestive selling, and handling over-the-counter (OTC) transactions while ensuring that we are returning every traveler to the road better than they came! In this role, you can expect to: · Work in a fun, trusting environment focused on providing great service where the expectations of the customer are exceeded · Have extensive knowledge of the products we sell and the services we provide · Have strong suggestive selling skills to help generate revenue. Ability to influence in a professional manner while displaying high integrity · Write, detail, and process (pay out) Work Orders and OTC transactions; Properly write up an ETA Work Order; Secure Purchase Orders, Prepare and communicate quotes to customer · Source parts from outside vendors and coordinate delivery · Prepare end of shift drop and shift report; Understand various payment types · Maintain the safety of both our customers and team members What we’d like to see: · A dedicated individual who works well with others and is excited to be part of our team! · High School Diploma or GED · Good verbal and written communication skills · Previous cashier and customer service experience; experience in repair or parts shop preferred · Strong suggestive selling skills · Basic computer skills · Ability to work flexible hours including nights, weekends and some holidays in interior and exterior conditions · A valid driver’s license Typical Physical Demands In this role, the team member is regularly required to talk and hear. Standing, walking, kneeling, stooping, bending over, crouching, crawling, climbing, and repetitive use of legs are done occasionally. The team member is occasionally required to lift up to 50 lbs and/or move heavy objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. All performed with or without a reasonable accommodation. Work Environment While performing these duties of this job, the employee may be exposed to outdoor elements in all seasons. Occasionally, the employee will also be exposed to fumes and particles, moving mechanical parts and vibration. The noise level in the work environment can be loud at times. While performing these duties, the employee may be exposed to dirt, dust, grime, grease, oil, gas, high-concentrated cleaning solutions, etc.

Job Description Job Summary We are looking for experienced Diesel Mechanics/Technicians in Pueblo, CO Pay starting at $25 per hour with the potential to go hire. Commission also available. As a Diesel Technician, you will provide accurate, efficient service to customers by troubleshooting, diagnosing, and repairing heavy duty trucks and trailers in a professional and accommodating manner. Our Technicians ensure we are returning every traveler to the road better than they came! In this role, you can expect to: · Work in a fun, trusting environment focused on providing great service where the expectations of the customer are exceeded · Have extensive knowledge of the products we sell and the services we provide · Diagnose wear conditions and together with TSA or Manager, makes recommendations to customers · Complete repairs within their capabilities and as written · Understand Truck Service Standard Services and specialized customer programs · Follow safety guidelines and reports potentially unsafe situations caused by team members and/or customers. What we’d like to see: · A dedicated individual who works well with others and is excited to be part of our team! · Good verbal and written communication skills · Previous experience in repair or parts shop preferred · Basic computer skills · Ability to work flexible hours including nights, weekends and some holidays in interior and exterior conditions · A valid driver’s license Typical Physical Demands In this role, the team member is regularly required to talk and hear. Standing, walking, kneeling, stooping, bending over, crouching, crawling, climbing, and repetitive use of legs are done occasionally. The team member is occasionally required to lift up to 50 lbs and/or move heavy objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. All performed with or without a reasonable accommodation. Work Environment While performing these duties of this job, the employee may be exposed to outdoor elements in all seasons. Occasionally, the employee will also be exposed to fumes and particles, moving mechanical parts and vibration. The noise level in the work environment can be loud at times. While performing these duties, the employee may be exposed to dirt, dust, grime, grease, oil, gas, high-concentrated cleaning solutions, etc. Requirements Qualifications for the Diesel Technician position: • High school diploma or equivalent; vocational training in diesel technology is preferred., • Considerable experience in diesel repair and maintenance., • Strong problem-solving and diagnostic skills., • Ability to work independently and as part of a team., • Effective communication skills., • Valid driver's license with a clean driving record., • Willingness to work flexible hours, including nights and weekends.

Job DescriptionDustrol Inc., is a 100% employee-owned asphalt contractor in Pueblo, CO that designs, builds, maintains, and modifies its own custom-made equipment for use on Cold milling and Hot-In-Place asphalt recycling projects. Established in 1973, we have had continued success growing our footprint throughout the Midwest. We are currently looking for a full-time Heavy Field Mechanic to support the Western Division in Pueblo, CO. Candidates must be willing to learn new tasks and have pride in the quality of their work. Job Details: • Perform major and minor repairs on engines, transmissions/clutches, differentials, fuel systems, air systems and hydraulic systems., • Perform efficient diagnostics on electronic controls and components., • Operate and inspect machines and ensure they meet or exceed DOT standards., • Perform preventative maintenance, and sample-based repairs., • Foundation repairs, brakes, suspension, steering, drivelines., • Repair custom built equipment under guidance of Shop Foreman., • Notifies Shop Foreman of any additional work required on a unit., • Notifies Shop Foreman if equipment or vehicle is not in serviceable condition or constitutes a safety hazard., • Field position that can work out of town during our season (April-October).Job Qualifications:, • Repair experience with and without manuals., • A technical degree or certification is a plus but not required., • Experience working with air brake, hydraulic and electrical systems., • Experience in preventive maintenance of Diesel engines., • Manage jobs efficiently and in a timely manner., • Must have ability to communicate repairs to manager and complete daily work orders and timecards., • Demonstrated ability to follow instructions (written and oral) and work independently.Job Requirements:, • Minimum two years’ experience preferred., • Must have tools to support general Class 8 truck and trailer repairs., • Must be able to lift, push, or carry objects of 50lbs on a continual basis., • Regularly work near moving mechanical parts and outside conditions that include inclement weather, heat and humidity, and exposure to dust, fumes, and asphalt., • Must have a valid driver's license class, CDL REQUIRED or have the ability to obtain a CDL.Pay: $80,000-$100,000 a year Dustrol, Inc. is an equal opportunity employer, and this posting is intended to describe the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities, duties and skills required. Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance, • Diesel engine repair: 0-2 years, • Mechanical knowledge: 0-2 years Powered by JazzHR rXrhPd2GPl

Job Description Part Time Maintenance Technician I - Night Shift (7:00pm - 7:00am Saturday & Sunday) - $28.00/hr. + $1.00/hr. Shift Differential Who we are looking for: We are currently looking for a Part Time Maintenance Technician I - Night Shift (7:00 p.m. to 7:00 a.m. Sat./Sun.) to be based out of Pueblo, Colorado. Reporting to the Maintenance Manager, the Maintenance Technician I will be responsible for maintaining production and quality by ensuring operation of machinery and mechanical/electrical equipment. What you’ll do: Maintenance Technician I’s responsibilities include, but are not limited to: • Follow diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications to troubleshooting malfunctions., • Fabricate repair parts by using machine shop tools and equipment., • Follow maintenance schedules and document all maintenance activities accurately., • Conduct routine inspections, lubrication, and calibration of equipment to prevent unplanned downtime., • Perform electronic equipment repair and replace electrical components or defective parts (includes control power, sensors, switches, etc. (120V), • Repair electrical motors, parts, wiring and other electrical devices., • Ability to troubleshoot mechanical systems, determine errors, and replace mechanical components (includes pillow blocks, rotary joints, bearings, chains, etc.), • Perform hydraulic maintenance, including fixing leaks, refill reservoirs, and repair work., • Support Preventive maintenance on boiler, chiller and compressor, • Perform fabrication and welding, • Respond promptly to equipment breakdowns or failures to minimize production downtime., • Perform tool changes on equipment when required., • Work within team environment with minimum supervision., • Exercise judgment and initiative within established guidelines., • Perform inspections of safety devices in facility. (Fire extinguishers, Emergency Lighting), • Minimum educational requirement is high school diploma, or equivalent. A technical certification or degree in maintenance or a related field is a plus. Certification in Maintenance Management, OSHA, or DOT HAZMAT certification is preferred., • Experience and knowledge of Lean Daily Management principles preferred, • Strong mechanical aptitude, • 3 years of proven experience as a Maintenance Technician or in a similar role doing electrical/mechanical maintenance in an industrial/ manufacturing environment., • Strong knowledge of mechanical, electrical, and HVAC systems., • Experience with installation of machinery and equipment as well as disassembly., • Must be adaptable to changes in the work environment, comfortable with multiple competing demands and able to deal with frequent change, delays, or unexpected events in a calm and logical manner., • Must be able to work safely and efficiently in a fast-paced work environment, • Able to lift 50 pounds unassisted, • All associates must embrace and foster an environment that supports our core values of Integrity, Respect, Excellence, Teamwork and Accountability., • Know and follow plant safety rules and Life Savings Rules, understand the Atkore Values, Knowledge of 5s practices, and consistently wear proper PPE., • Complete Lock Out Tag Out and Forklift Training, • Zero safety incidents in past 90 days of evaluation date, • Less than 15 attendance points on the date of evaluation, • Train on plant equipment operation procedures to assist in troubleshooting skills Atkore is a five-time Great Place to Work© certified company and a three-time Top Workplaces USA award winner! We’re committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $28.00 per hour. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays Applications accepted through August 13, 2025 or until filled. Apply at .

Job Description Floater - 1st shift (7:00am - 3:00pm) $20.00/hr. Who we are looking for: We are currently looking for a Floater – 1st Shift (7:00 a.m. to 3:00 p.m.) to be based out of Pueblo. Reporting to the Manufacturing Supervisor, the Floater will be responsible for the quality and accurate production of fiberglass elbows. What you’ll do: The Floater’s responsibilities include, but are not limited to: • Ensure all supplies are gathered for the duration of the shift, • Assist in initiating bending, including cutting and sanding preparation, placing in the oven, cooling, verifying angle and labeling, • Relieve Bender for breaks and lunches, • Assist in red striping, cutting or swedging as directed, • Perform final inspection on angle, label, and appearance of elbows, • Perform maintenance tasks as directed by supervisor, • Responsible for housekeeping in assigned area, • Minimum educational requirement is a high school diploma or equivalent, • One year’s previous shop experience is preferred, • Excellent interpersonal and communication skills, • Good understanding of math skills required for quick and accurate counting, calculations and measurements including radius, inside and outside diameter, and length, • Attention to detail, accuracy, time management and organization, • Must be adaptable to changes in the work environment, comfortable with multiple competing demands and able to deal with frequent change, delays or unexpected events in a calm and logical manner, • Must be able to work safely and efficiently in a fast-paced work environment, • Know and follow plant safety rules and wear proper PPE, • Zero safety incidents in past 90 days of evaluation date, • Less than 15 attendance points on the date of evaluation Atkore is a five-time Great Place to Work© certified company and a three-time Top Workplaces USA award winner! We’re committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $20.00 per hour. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays Applications accepted through March 31, 2025. Apply at .

Job Description Human Touch Home Care is looking for a personal care worker to join our team. We value our employees like family. We are a locally operated home care company that has been helping our clients to live their most healthful and fulfilling lives at home in the Colorado area. Requirements: • Provide unskilled personal care services and homemaking services to the company's patients., • Attends to any unskilled personal care services that the consumer requires using the Rules and Regulations document provided by the Company., • Accompany or drive patients to physician/clinics, • Provide assistance or stand by assistance with bathing, skin care, hair care, toileting, dressing, shaving, nail care, mouth care, etc., • Perform housekeeping tasks as directed, • Make bed, change and launder linens, • Wash dishes, prepare meals and grocery shop, • Clean stove, kitchen, bathroom, and only the consumers living area and bedroom, • Vacuum, sweep, dust, take out trash, run errands as needed, mop floors (make sure floor is dry before leaving), • Advises staffing director of requests which cannot be met or of conditions which are unsafe, • Is dependable to consumers and Company in both providing and documenting services on time sheets, • Minimum High School Diploma or GED., • Ability to read, analyze and interpret regulations and other documents., • Requires personal transportation, valid state issued driver's license, good driving record and auto insurance as required by law., • Some experience working with elderly and frail but will train. Work Location: In person Job Posted by ApplicantPro

Walmart - 78 N Mcculloch Blvd - [Retail Associate / Shopper / Team Member / from $14 to $26-hr] - As an Online Order Filler & Delivery at Walmart, you'll: Acknowledge and greet customers with a smile; Answer customer questions; Help customers find the products they are looking for; Shop for customer

Job Description Requirements • RVIA certification is recommended but not required, • A successful Recreational Vehicle (RV) Technician will have strong attention to detail, be self-motivated, and be well-versed in all maintenance and repairs, • Plumbing-Carpentry-HVAC-Electrical-Mechanical-RV Service, • A successful Recreational Vehicle (RV) Technician will have strong attention to detail, be self-motivated, and be well-versed in all maintenance and repairs, • Certification from college or technical school in trade field (HVAC, Electrical, Plumbing, Maintenance, etc.) is certainly helpful but, we also consider applicable work experience, • Valid driver's license Responsibilities • Provide and document complete diagnostic tests and repair or replacement services to customers, • Perform electrical, plumbing, carpentry, and appliance maintenance, • Track all parts and materials used in repairs or replacements, • Keep supervisor appraised of work progress, • Ensure that the final work product meets quality standards and is inspected by the supervisor or designee, • Prolonged periods of standing, stooping, crawling, and bending, • Exposure to heights and hazards related to working with electrical and welding equipment, • Environmental conditions include heat, cold, humidity, noise, dust, and wetness, • May lift up to 25 lbs and/or move up to 50 lbs, • Make 100 % productivity the goal and keep as close to that as possible, • Use factory specifications as the standard in all repair, service, and customization work, • Provide excellent customer service for all external and internal customers, specifically offering dependable vehicle service, • Receive service assignments from the service writer or service manager, • Have the repair work finished within the allotted time. Set goals, develop skills, and constantly increase efficiency skill level, • Submit your requested parts as soon as it is determined what is required for a particular job, • Keep the service writer or service manager informed of any additional work that may be required or of any delays to the estimated completion time as you make those determinations so the customer can receive up-to-date information, • Aid service writer as needed to write work orders, conduct test rides, interact with the customer, or in any other way you are able to guarantee customer satisfaction, • Maintain a clean, efficient work area and assist in keeping the shop neat and organized, • Make sure the proper paperwork is completed and filed after every job completion, • Keep your technical qualifications current by finishing any required training programs, • Take care that the vehicle is cleaner when the job is completed than when the customer dropped it off Salary is based on a structure that takes into account an individual’s experience. Company DescriptionWe are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local lawsWe are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws

Job Description Optical Retail Sales Associate Part Time 30 years ago Dr. Barnes founded Eyemart Express to deliver everything a patient needs. It started with one friendly shop in Appleton, WI, and has since expanded to over 245 stores in 42 states. Today, Eyemart Express is celebrated for promptly delivering quality eyewear at great prices, while maintaining great relationships with optometrists and local communities. We’re not like everyone else—with local labs in stores, eye exams, and same-day delivery on glasses—our customers never miss a moment. Now, you can join one of the nation’s top optical retailers and help improve lives by helping people see better. Earning Potential: The earning potential for this role is competitive, inclusive of base pay ($15.00 - 16.00) and incentives. The Retail Sales Associate, also known as a Retail Optician, will primarily assist patients in selecting the eyeglass frames, lenses, and lens coatings that best suit their needs. The Retail Associate will also be responsible for ensuring the lab technicians have accurate measurements and prescription information for grinding, coating, and fitting lenses to the frames. Once the glasses are complete, the Retail Associate is responsible for dispensing the glasses to the patient. Responsibilities: * Customer Service: Provide exceptional customer service to all patients. * Sales and Promotions: Maintain knowledge of current sales and promotions as well as policies regarding payment, returns, and exchanges. * Transaction Processing: Compute and process payment transactions/refunds using the in-house Point of Sale system. * Insurance Claims: Process insurance claims efficiently. * Product Knowledge: Maintain up-to-date knowledge of products. * Patient Files: Create and maintain patient files, following company and HIPAA policies regarding confidentiality. * Patient Assessment: Assess and interpret patient’s needs/wants based upon prescription requirements, facial features, lifestyle, and occupation, and suggest the most appropriate products (i.e., frames, lens type, coatings). * Measurements: Take necessary measurements (i.e., measuring the patient’s pupillary distance). * Work Orders: Prepare work orders for the lab ensuring all pertinent information is listed (i.e., patient information, prescription, lens size/type, measurements, special tinting or coating, etc.). * Lens Selection: Pull correct lenses according to work order specifications. * Product Inspection: Inspect the final product for accuracy; adjust completed glasses to fit the patient using pliers, hands, and heat if necessary to bend frames accordingly. * Adjustments and Repairs: Adjust/repair damaged frames, replace nose pads, and missing screws. * Merchandise Management: Price, stock, and straighten merchandise. Requirements: * High School Diploma or GED. * Experience working in retail, customer service, or sales. * Experience working in the optical industry is preferred but not required. We are willing to train. At Eyemart Express, we're dedicated to excellence in everything we do. We understand the importance of work-life balance and strive to be as flexible as possible with scheduling needs to ensure our team members can achieve harmony between work and personal life. If you're ready to join a company that values excellence, invests in your future, and respects your need for balance, submit your resume today! Eyemart Express is where your career takes off. This posting provides an overview of the role. A full job description will be provided upon hire. VSP Vision is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to age, gender, race, color, religion, sex, national origin, gender identity, sexual orientation, disability or protected veteran status. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Do you enjoy shopping? Online orderfillers and delivery associates get to do just that every day. Online orderfillers have the opportunity to shop for our customers and choose just the right apple, or select their favorite cereal. This position is extremely fast paced and is one that gets to spend t

Job DescriptionLooking for full time Master Certified and Certified Kia and Chevrolet technicians that would love to be part of a high energy, growing service department. Starting pay $50,000/year plus, depending on experience and level of certification. Benefits are also offered. Qualifications Education High school diploma or the equivalent. Other Ability to read and comprehend instructions and information. Professional personal appearance. Excellent communication skills. Ability to meet company's production and quality standards. Physical Requirements Surroundings move throughout the company facility for most of the shift. spend time outdoors in the weather and elements. Sitting infrequently Standing for prolonged periods Walking on a regular basis Bending, twisting and/or stooping on a regular basis Kneeling and/or Squatting on a regular basis Lifting over 50 lbs on a regular basis Reaching and/or lifting overhead on a regular basis Climbing stairs Repetitive hand/finger movement on a regular basis Grasping/grabbing with hands on a regular basis Pushing and Pulling on a regular basis Expectations General Expectations Devote himself/herself to insuring satisfaction to customers. Determine management, production and quality requirements by asking questions and listening. Attend company meetings as required. Maintain a follow-up system that encourages follow through with assigned projects. Establish personal performance goals that are consistent with company standards of productivity and devise a strategy to meet those goals. Review and analyze actions at the end of each day, week, month, and year to determine how to better utilize time and plans more effectively. Understand the terminology of the business and keep abreast of technology changes in products and services. Know and understand the federal, state and local requirements which govern the company’s business. Follow lawful directions from supervisors. Understand and follow work rules and procedures. Participate in performance management. Interact well with others and be a positive influence on employee morale. Uphold the company’s non-disclosure and confidentiality policies and agreements. Work evening, weekend and holiday work hours as required. Job-Specific Expectations Performs lube oil filter services in a professional manner and performs vehicle inspections as required. Provide excellent customer service for all customers whether external and internal, specifically offering dependable vehicle service. Maintains equipment in good working condition and maintains the work area in a safe, clean and organized manner. Receive service assignments from the service writer or service manager. Have the 'lube' work finished within the allotted time. Set goals, develop skills and constantly increase efficiency skill level. Maintain a clean, efficient work area and assist in keeping the shop neat and organized. Make sure the proper paperwork is completed and filed after every job completion. Keep your technical qualifications current by finishing any required training programs. Take care that the vehicle is cleaner when the job is completed than when the customer dropped it off. When assigned other duties as they may be given pursue and accomplish with excelleny in mind.

Job Description Part-Time Manager Opportunity Join the team. Drive Sales. Be the Most You! At Claire’s, we’re all about self-expression, creativity, and bringing the latest trends to life for our customers. If you thrive in a fast-paced retail environment, love engaging with customers, and have a passion for driving sales, this is the perfect opportunity for you! Responsibilities • Own the Sales Game: Crush sales goals by delivering next-level customer experiences, upselling must-have accessories, and hyping up promos to drive revenue., • Piercing Excellence: Join the ranks of our piercing experts through comprehensive training. Become a trusted guide for customers - conducting piercings, educating on aftercare, maintaining a sterile environment, addressing questions and concerns throughout the process., • Keep It Fresh: Maintain an Insta-worthy store with perfect displays, organized inventory, and easy-to-shop layouts that make browsing fun and effortless., • Team Collaboration: Support your Store Manager by motivating the team, sharing sales tips, and creating a positive, high-energy vibe that customers (and coworkers) love., • Brand Representation: Showcase Claire's products and services. Stay plugged into the latest fashion and social media trends to help customers find their perfect style. Use your knowledge to suggest products and boost sales., • Store Operations: Keep the heartbeat of our store strong by overseeing operations with efficiency and flair. From managing inventory and handling cash transactions to visual merchandising and coordinating promotional activities. You ensure that every aspect of store operations reflects the fun and joy that defines Claire's., • Create Shareable Moments: Encourage customers to show off their new accessories and piercings on social media, turning their Claire’s haul into the next viral moment. About You • Sales-Obsessed Energy: You love the thrill of making a sale, hitting goals, and turning browsers into buyers., • Social & Digital Savvy: You know what’s trending, what’s viral, and how to translate that into an amazing customer experience., • Customer-First Mentality: You get people, and you love making them feel confident and empowered., • Retail & Leadership Skills: At least one year of retail experience, ideally with some leadership or sales-driving responsibility., • You can conduct piercings and demonstrate patience and empathy, particularly with young or anxious customers., • You are proficient in operating a POS system to facilitate transactions and manage sales efficiently, contributing to smooth store operations., • You have completed some high school and have at least one year of retail management experience., • You can stand during scheduled shifts and maneuver 11-35kg (25-75lbs)., • You can bend, stoop, extended reaching, and climb ladders or step stools while placing merchandise throughout the store and assisting customers., • You are passionate about providing our customers with opportunities to express themselves freely every day., • You are energized by interacting with customers and stive to provide excellent service throughout their visit., • You are inspired by our values of teamwork, compassion, integrity, customer delight, diversity, and self-expression., • You have strong verbal and written communication skills to effectively interact with customers, employees, and management., • You possess a strong grasp of mathematics, essential for tasks such as inventory management, sales analysis, and cash handling., • You are a driven team player with a positive attitude and willingness to learn., • You’re self-motivated and organized, as some of our stores may require you to work alone at times., • You show a passion for fashion and stay up to date with the latest trends, which can contribute to enhancing the customer experience and driving sales., • Epic Employee Discount: Score the latest accessories at an amazing discount!, • Career Glow-Up: Real opportunities for promotions and career growth. Upon submitting your application, you can expect an update within 5 days. If the hiring manager wants to proceed with your application, the process will involve a face-to-face interview in one of our stores. This will provide you with the opportunity to showcase your passion for customer service, teamwork, and self-expression, while also giving us a chance to get to know you better. Compensation Range: $16.31 - $17.81 Claire’s is committed to adhering to all applicable company policies and federal, state, and local laws and regulations. All positions will be compensated at or above the legally mandated minimum wage for the location in which work is performed. The final compensation will be determined by various factors such as relevant work experience, education, certifications, skills, and geographic location. Benefits for full-time employees included medical, dental, and vision insurance, voluntary welfare plans, bonus plan eligibility, 401(k) match, vacation time, sick time* and paid leave. Benefits for part-time employees included voluntary welfare plans, 401(k) match, vacation time, sick time* and paid leave in required states. *Sick Time: For the State of Washington, all employees will accrue paid sick time at the rate of 1 hour for every 30 hours worked. Claire's is an equal opportunity employer committed to diversity, equity, and inclusion and we encourage applications from members of all underrepresented groups, including those with disabilities. We will accommodate applicants' needs, upon request, throughout all stages of the recruitment process. Please inform us of the accommodation(s) that you may require. Information received relating to accommodation will be addressed confidentially. To request accommodation, please email . Only messages sent for this purpose will be considered.

Job DescriptionDescription: Are you ready to join the winning team? At Gills Point S, our team has a common goal of providing exceptional service to our customers, while also ensuring that each employee feels valued, respected, and engaged in contributing to the success. With our strong reputation for family values and operational ethics, we are eager to add more team members who want to grow with us. We are seeking an experienced Tire & Auto Service Assistant Manager to serve a critical role supporting the management of our retail tire and automotive repair store. Seeking a team builder with experience in all facets of store operations. Duties include sales, scheduling and service, inventory and payroll management and control, staff management and development all geared toward achieving an overall objective of growing the business through high quality operational and customer service execution. If you are... • Proven at building rapport with customers, team members and vendors to ensure exceptional service, • Adept at directing and monitoring day-to-day retail store activities, • Driven for results through effective prioritization and delegation of work, • Detailed and attentive to executing against a plan and set of standard operating procedures, • Growth and leadership opportunities in our expanding organization, • Stable work hours, • Competitive pay, • 401(k) savings plan with company match, • Paid Time Off, • Medical, dental, vision, LTD, STD, Life Insurance, and Accidental Benefits available after 60 days, • A great team to work with and a company with upward mobility Requirements: Experience needed... • Minimum 3 years automotive shop or retail service experience, including at least 2 years in a supervisory role., • Must enjoy and thrive in a fast-paced goal-driven environment., • Must possess the ability to use computers/POS system, communicate effectively and establish lasting customer relationships, plan and prioritize work efficiently while upholding excellent quality standards., • Techniques to manage and balance store and shop productivity with cost and sales trends

Administrative Assistant / Remote] - Anywhere in U.Both PT & FT Available - As a Data Entry Specialist you'll: Enter appropriate credits for each song; Transcribe, review, edit, and add the lyrics; Assist in adding all information needed for music publishing utilizing various databases; Create, assi

Create an outstanding customer experience through exceptional service.Establish and maintain a safe and clean environment that encourages our customers to return.Assist manage in achieving sales and profit goals established for the Cheese department, and monitor and control all established quality a