Trabajos status en Santa Ana, CaliforniaCrear alertas

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Software Engineering - Controls Engineer Job Code: 40556 Job Location: Anaheim, CA Schedule: 9/80 Job Description: Under general direction of the Management of Software Engineering, this position develops and applies advanced software engineering methods in the investigation and solution of complex and advanced technical problems power system architectures and power conversion equipment. The Specialist Software Engineer shall lead a small software engineering team to support all stages of product development from design through implementation and system integration under minimal supervision. Essential Functions: • Perform control systems analysis of power conversion equipment and system architectures., • Support development of control systems’ design and architectures for new products., • Design and implement customer specifications, requirements for control systems design., • Write product and test specifications, modeling, and verification procedures pertaining control systems., • Implement and support control system design with MATLab, Simulink, C/C++, and other embedded system programming language., • Ability to work simultaneously on a variety of projects., • Continue improvement in technical approach to maximize efficiency of engineering resources., • Provides input with a variety of control systems, engineering concepts, practices, and procedures, • Control Specialized Software Engineer will take directions from Project Engineer and Software Engineering Manager., • Expected up to 35% of travel to customer sites for on-site support. Qualifications: • Bachelor of Science degree in Electrical Engineering (B.S.E.E.) or equivalent from a four-year college or university; and minimum 4 years of experience in design and analysis of control systems for power conversion equipment. Master of Science or advanced degree preferred with reduced minimum of 2 years of work experience. For candidates with a Ph.D. or higher, relevant research experience may be considered in lieu of professional work experience, • Must be able to obtain a US security clearance, • Must have familiarity with control systems for power system architectures and power conversion equipment., • Must have strong knowledge of control theory, ability to model with MATLAB / SIMULINK., • Experienced in the practical implementation of control system algorithms., • Experienced in with digital signal processing, machine-to-machine communications, and fiber optics based communications subsystems., • Experienced with communication protocols, such as RS-232, RS-485, and Ethernet., • Proven effective communication with Senior Project Engineers, Program Management, and customer representatives is essential., • Must be able to work as a key member of the design team with Power Design Engineers, Digital and Analog Engineers, System Engineers, Software Engineers and Mechanical Engineers., • Experienced in C and C++ programming. Knowledge of Python or C-Sharp is beneficial., • Required to have ability to obtain and maintain a secret/security clearance. Preferred Additional Skills: • Knowledge of power electronics and analog circuits, a plus., • Experience in development of military products, a plus., • Knowledge in Digital, and Microcomputer circuits, a plus., • Experienced in embedded real-time systems design, a plus, • Experienced in object and service-based software architectures, a plus. In compliance with pay transparency requirements, the salary range for this role for California is $105,500- 180,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-RTC1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in or . For information regarding your Right To Work, please click here for or .

Job Description As a valued member of our team, the Maintenance Truck Tech II is required to perform all duties of a level 1, in addition to perform basic to mid-level repair skills on at least 80% of all vehicle areas including hydraulic systems, engine and transmission accessories. Effective skills in welding, use of torch and A/C systems. Not including electronic or high-level diagnostics and repairs on all vehicle areas; also, not including internal component repairs of engine, transmissions, and gear boxes. Shift Tuesday - Saturday 10:00 am- 6:30 pm. Occasional overtime may be required as needed. Travel Required: Estimated less than 25% Benefits · Paid Holidays · Paid Vacation · Medical, Dental, Vision · 401k Retirement · $100 credit for boots after 90 days · Uniforms provided · Tool allowance when applicable · Monthly credit for cellphone use Essential Functions: • Appropriate tools required to diagnose and perform mayor repairs in vehicles., • Able to use compressed gas torch and adjustments., • Effectively do inspections and mechanical repairs to equipment and routine preventive services., • Efficient communication and computer skills for proper file documentation on each job performed., • Knowledge and ability to identify the proper name of all visible parts and non-visible parts in a vehicle., • Maintain a high standard of safety, cleanliness, and efficiency in all maintenance., • Will maintain appropriate record keeping for Bit inspections, DVIRs, work done description and work orders., • Ensures vehicles meet CHP/BIT/PM inspection requirements., • Replace, install and service brake systems, cab and sheet metal components, engine accessories, HVAC systems, hydraulic systems, and lighting electrical systems., • Replace, install and service mixer truck equipment, product transfer systems, starting systems, steering systems, transmissions, wheels, hubs, and bearings., • Replace, install frame components and basic diagnose of electronic control systems., • Replace, install, service and diagnose charging systems, clutches and drive lines, and suspensions systems., • Will inspect and identify vehicle conditions on different types of equipment such as tractors, trailers, or mixers., • Will install, select, or identify proper tire replacements & legal limit knowledge., • Complete all maintenance duties as assigned, and repair all equipment on property including, but not limited to, diesel, plant, or yard equipment., • Perform routine and preventive maintenance to keep vehicles and equipment in compliance with DOT and company standards. Non-Essential Duties: • Efficient organizational skills for scheduling and periodization of jobs., • Will prepare metal surfaces and welding techniques to complete assigned tasks., • Tracks and schedules with operations or manager on vehicles status and updates., • Perform other duties as assigned by management. Core Competencies: • Ability to read and interpret documents., • Basic math and measurement skills., • Knowledge of methods, tools, and equipment utilized in maintenance repair. Travel Required: Estimated less than 25% Minimum Education and Experience • High school diploma., • 3+ years of heavy-duty tractor maintenance experience., • 3+ years experience of work on electrical, mechanical, and hydraulic systems., • Must have own tools. Preferred Education and Experience • Associates degree, technical school certificate or equivalent experience., • 4+ years of heavy-duty tractor maintenance experience., • 4+ years experience of work on electrical, mechanical, and hydraulic systems., • 2+ years experience welding. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to walk, climb, or balance, stoop, kneel, crouch, or crawl and talk or hear. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, toxic or caustic chemicals and outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat, and risk of electrical shock. The noise level in the work environment is usually moderate to loud. The employee is regularly exposed to wet or slippery ground conditions. Employees must wear the required personal protective equipment; up to and including safety vest, hard hat, ear protection, gloves, and safety glasses. Able to climb height up to 10 feet. This Organization Participates in E-Verify Esta Organizacion Participa en E-Verify Associated Ready Mixed Concrete is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Associated Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job Description Now Hiring Part Time CERTIFIED School Bus Drivers - Tustin, CA: Sign-On Bonus: $5,000* • Hourly Rate: $30.40 - $37.45 per hour., • Training Hourly Rate: $18.00 per hour., • Guaranteed Minimum Hours: Get paid for 5 hours per day at minimum., • School Bus Certification required. As a Part Time School Bus Driver, you will play a vital role in your community and the lives of students. You will start students' days with morning pickup before school and transport them safely back home in the afternoon. Additional hours for field trips and special event transportation may be available. We are here to help you succeed with expert training and guidance to help you become a safe and professional First Student school bus driver. School Bus Driver benefits: • Pay Details: Dependent on experience and qualifications., • Hourly Rate: $30.40 - $37.45 per hour., • Training Hourly Rate: $18.00 per hour., • Guaranteed Minimum Hours: Get paid for 5 hours per day at minimum., • Medical, Dental, Vision, & Life insurance or coverage options., • 401(k) Retirement Plan with company match., • Part-time, flexible schedule: Split shifts (AM/PM routes), weekdays only; No nights, weekends, holidays, or summers required., • Career Advancement Opportunities: Advance into operational, maintenance, management, and leadership roles in over 540 locations across the U.S. & Canada!, • Employee Assistance Program (EAP): Counseling and support services for personal and work-related issues., • Community Impact: Be a trusted figure for students and families., • Employee Discount Program: Discounts on various products and services. Your day as a School Bus Driver will include: • Safely transport students to and from school and activities., • Supervise boarding and unloading at stops; assist students with seatbelts and mobility aids., • Maintain order on the bus to prevent distractions., • Conduct pre-trip and post-trip inspections (brakes, lights, tires, emergency exits)., • Report mechanical issues promptly and keep the bus clean and sanitary., • Obey all traffic laws and company safety standards., • Communicate with parents, school staff, and dispatch about student behavior or delays., • Demonstrate leadership and customer service skills. School Bus Driver Jobs are Perfect For: • Retirees looking for supplemental income., • Stay-at-home parents seeking daytime work., • Veterans transitioning into civilian roles., • Anyone seeking a second career or flexible job., • People who enjoy working with children. You might be a good fit as a School Bus Driver if you: • Are at least 21 years old., • Have a valid driver's license for at least 3 years., • Are looking for a part-time schedule and summers off., • Enjoy working with students. Note: This position is subject to DOT drug testing as a safety-sensitive employee. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. Great School Bus Drivers often bring skills such as: • Valid Class B License., • History driving with ride share companies or taxi services., • Previous experience as a teacher, CDL driver, social worker, classroom assistant, hospitality worker, or customer service or retail associate. Take the wheel and drive your career forward with First Student! Make an impact in your community while enjoying flexible schedules, great pay, and unmatched support. *Sign-on bonus conditions apply. See location for details. Bonus offer is effective 9/2/26 - 12/31/26. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job Description SUMMARY: The Driver supports both delivery and production operations. This position may not have driving or delivery assignments every day. On days when no deliveries are scheduled, the employee will serve as a Production Floater and assist assigned production departments with assembly, material handling, packaging, housekeeping, and other duties as directed. When deliveries are scheduled, the employee will safely transport materials and company items, verify delivery documentation, and follow all company vehicle and safety requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES: DRIVING AND DELIVERY • Safely operate assigned company vehicles on daily delivery and pickup routes, generally traveling approximately 5 to 100 miles per day based on business needs., • Pick up and deliver materials, supplies, signs, furniture, and other items to vendors, company locations, job sites, and designated departments accurately and on schedule., • Plan and follow assigned routes, communicate delays or delivery issues promptly, and obtain required delivery confirmations, signatures, or other documentation., • Represent the company professionally and communicate respectfully with vendors, customers, employees, and job-site contacts., • Compare packing slips, purchase orders, quantities, and delivered items for accuracy before accepting or distributing materials., • Do not accept items that cannot be matched to an authorized purchase order unless directed by the supervisor or Purchasing., • Inspect deliveries for visible shortage, damage, or discrepancy and promptly notify the supervisor or Purchasing before materials are released., • Return completed packing slips, purchase orders, receipts, and other delivery documentation to Accounts Payable or Purchasing promptly., • Review assigned purchase orders for overdue or back-ordered items and communicate status concerns to the Purchasing Agent., • Safely load, secure, unload, lift, carry, and position materials and company property, including items weighing up to approximately 50 pounds and items that may require movement on stairs., • Use carts, dollies, forklifts, or other material-handling equipment only when trained and authorized, and request team assistance for heavy, oversized, or awkward loads., • Protect transported items from shifting, damage, weather, or loss and deliver them to the correct department or designated location., • Serve as backup support to Purchasing and Subcontracting as assigned., • Assist the Sewing Department as needed, including grommeting, moving fabric bolts, and packaging flags. VEHICLE SAFETY AND COMPLIANCE • Conduct required pre-trip and post-trip vehicle inspections and promptly report damage, defects, maintenance concerns, or unsafe operating conditions., • Comply with traffic laws, parking and loading requirements, company vehicle policies, seat-belt requirements, and restrictions on distracted or unsafe driving., • Maintain vehicle cleanliness, organization, fuel levels, and required inspection, mileage, fuel, and maintenance records., • Properly secure all materials, tools, and equipment before operating the vehicle and verify that loads remain within the vehicle’s rated capacity., • Immediately report accidents, citations, injuries, property damage, cargo loss, or other driving incidents in accordance with company procedures., • Maintain all licenses, medical certifications, driving qualifications, and training required for the assigned vehicle and promptly report any change that may affect driving eligibility. GENERAL RESPONSIBILITIES • Maintain consistent attendance and punctuality and follow established schedules and break periods to support delivery and production requirements., • Attend company and department meetings, uphold company core values, and maintain professional conduct., • Perform other duties and special projects as assigned. EDUCATION, EXPERIENCE, AND QUALIFICATIONS • High school diploma or GED required., • At least three months of related delivery, driving, warehouse, material-handling, or production-support experience required., • Valid driver license appropriate for the assigned vehicle and a driving record that meets company and insurance requirements., • Ability to maintain any medical certification, vehicle-specific qualification, or other documentation required by applicable law or company policy., • Knowledge of safe driving, loading, cargo securement, delivery, and material-handling practices., • Ability to read and verify purchase orders, packing slips, delivery instructions, addresses, quantities, and related documentation., • Ability to safely operate carts, dollies, and other assigned material-handling equipment; forklift experience or the ability to complete company-provided training preferred., • Strong organizational and time-management skills with the ability to plan routes, prioritize deliveries, and meet scheduled deadlines., • Strong attention to detail and ability to identify shortages, damage, incorrect items, and documentation discrepancies., • Ability to communicate professionally with vendors, customers, employees, and other business contacts., • Ability to work independently, follow written and verbal instructions, and exercise sound judgment when responding to delivery or vehicle issues., • Ability to use email and basic Microsoft Office applications and complete required electronic or paper records., • Demonstrates reliable attendance and accurately records work time in accordance with company policy., • Regular on-site attendance and availability to travel locally during scheduled work hours are required. SUPERVISORY RESPONSIBILITIES: This position has no direct supervisory responsibilities. LANGUAGE SKILLS: Ability to read and interpret delivery instructions, purchase orders, packing slips, maps, safety information, vehicle documentation, and company procedures. Ability to complete routine records and communicate effectively with employees, vendors, customers, and other business contacts. MATHEMATICAL SKILLS: Ability to perform calculations involving quantities, weights, distances, mileage, fuel, and basic measurements and to verify delivery and purchase-order information accurately. REASONING ABILITY: Ability to follow written and verbal instructions, plan and adjust routes, identify delivery or documentation discrepancies, respond appropriately to changing road or job-site conditions, and recognize when an issue must be escalated. CERTIFICATES, LICENSES, REGISTRATIONS: Valid driver license appropriate for the assigned vehicle required. Must remain insurable under the company’s vehicle insurance program. Forklift certification preferred or the ability to complete company-provided training. A current medical certificate or other driving qualification may be required depending on the assigned vehicle. PHYSICAL DEMANDS - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Regularly sits for extended periods while driving and frequently enters and exits company vehicles., • Frequently stands, walks, bends, stoops, kneels, crouches, reaches, pushes, pulls, climbs stairs, and works in varied body positions while loading and making deliveries., • Frequently uses hands and fingers to handle materials, operate vehicle controls, complete documentation, and use assigned tools or material-handling equipment., • Regularly lifts, carries, positions, or moves items weighing up to approximately 50 pounds, frequently up to 60 pounds, and occasionally up to 65 pounds; team lifting or mechanical assistance is required for heavier or awkward items., • Must have sufficient vision, hearing, depth perception, peripheral awareness, and ability to adjust focus to safely operate a vehicle and perform delivery and material-handling duties. WORK ENVIRONMENT This position operates in company vehicles and regularly works in production, warehouse, vendor, customer, job-site, loading, and outdoor environments. • Regular exposure to traffic, changing weather and temperatures, noise, vibration, moving equipment, loading areas, uneven surfaces, and other conditions associated with driving and deliveries may occur., • Required to follow all company and site-specific safety procedures and wear appropriate personal protective equipment when entering designated areas., • Work schedules, routes, and delivery priorities may change based on production and business needs., • Regular on-site attendance and local travel during scheduled work hours are required to perform the essential functions of this position.

Job Description PRIMARY PURPOSE OF JOB: Driver is responsible for transporting materials between company facilities and customers in a safe and timely manner. This role also supports general warehouse duties including forklift driving, loading/unloading, and packaging. ESSENTIAL DUTIES & RESPONISIBILITES: • Understand paperwork and certifications., • Knowledge of COD’s and necessary paperwork., • Ability to read Thomas Guide map book., • Operate a forklift safely., • Insure truck is loaded safely., • Date stamp incoming purchase orders and insure purchase orders are stapled to blueprints., • Label all incoming hardware., • Assist in packaging parts for shipping., • Insure gages go with product., • Follow vehicle safety checklist., • Responsible for keeping vehicle clean., • Adheres to safety regulations., • Perform other duties as assigned. QULIFICATIONS: • Good driving record., • Ability to read maps., • Forklift driver, • Knowledge of Southern California freeways., • Ability to communicate, read, write, and understand English fluently. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 7:00AM - 3:30PM

" Licensed Psychiatrist\n \n Wage: Up to $224/hour \n \n Licensed psychiatrist - Are you ready to launch or expand your private practice? Headway is here to help you start accepting insurance with ease, increase your earnings with higher rates, and start taking covered clients sooner. It’s all on one free-to-use platform, no commitment required. \n \n About the role \n This position is for licensed psychiatrists looking to build or grow their private practice. Headway provides the tools, resources, and support to help you navigate insurance, streamline operations, and focus on delivering quality care - on your own terms. \n \n About you \n\n • You’re a fully licensed psychiatrist with your DEA or CDS number, ANCC board certification, a valid NPI number and malpractice insurance.\n, • You’re looking to start or expand your private practice while maintaining control over your schedule, client load, and work environment.\n, • We accept the following licenses on a state by state basis: MD / DO\n\n \n Why partner with Headway? \n As an independent provider with Headway, you’ll gain access to: \n\n • Hassle-free insurance credentialing: Get credentialed for free in multiple states within as little as 30 days.\n, • Increased earnings: Secure competitive rates with top insurance plans through our nationwide network.\n, • Predictable bi-weekly payments: Receive reliable payouts directly from Headway.\n, • Built-in EHR tools: Access real-time scheduling, secure client messaging, documentation templates, assessments, and more.\n, • Compliance & audit support: Stay up-to-date with insurance requirements and industry regulations.\n, • Free continuing education: Earn CEUs and expand your expertise through Headway Academy.\n\n \n How Headway supports your patients \n\n • Increased access: Headway makes it easier for your clients to get the care they need at a price they can afford through insurance.\n, • Instant verification: Clients can easily check their insurance status and get the care they need without disruption. \n\n \n Important Notes \n\n • This is a 1099 independent contractor role. You’ll have full autonomy over your practice, including setting your hours and managing your caseload.\n, • At this time, Headway can’t support mental health professionals that aren’t fully licensed. If your application was rejected for incomplete licensure, you’re welcome to reapply once you have a valid license. \n\n \n About Headway \n We make it easy for mental health providers to take insurance by credentialing you with the nation’s largest networks, handling billing and admin paperwork, and helping you earn more stable income with higher rates. With Headway, you can finally focus on what matters most: providing life-changing care. We’ll take care of the rest.

Job Description 3 Day Blinds is a national retailer and manufacturer of quality, custom-made blinds, shades, draperies, and shutters. We are proud to be part of the Hunter Douglas family of brands. Over the last 40 years we’ve successfully helped transform our clients' homes and workplaces by offering a wide variety of products that add beauty and comfort to every space. It takes a talented group of individuals to do what we do, and we do it together as One Team. We strive to create a culture of learning and opportunity, and most importantly, an environment where you can feel passionate and connected to your work every day. Love working with people, being on the move, and having control over your income? At 3 Day Blinds, you’ll meet with clients in their homes, help them design beautiful spaces, and guide them through a purchase all in one visit. With company-provided leads, paid training, and uncapped earning potential, you’ll have everything you need to build a high-impact career. What You’ll Do • Meet with clients in their homes to understand their needs and recommend custom window treatments, • Create simple, beautiful design solutions that fit each space, • Guide clients through the buying process and confidently close sales, • Manage your schedule, appointments, and follow-ups, • Generate additional business through referrals and networking, • Deliver an exceptional customer experience from start to finish Who You Are • A people person who enjoys building relationships and helping others, • Motivated by performance and excited about uncapped earning potential, • Confident, coachable, and comfortable working independently, • Organized and able to manage multiple appointments, • Open to working evenings and at least one weekend day, • Have reliable transportation and are comfortable traveling locally Backgrounds that do well in this role include sales, hospitality, customer service, retail, and other fast-paced environments, but no prior design experience is required. What We Offer • Uncapped commission with strong earning potential ($70K–$100K+ average), • Company-provided appointments plus opportunity to earn more through self-generated leads, • 3 weeks of paid training to set you up for success, • Tools provided (laptop, smartphone, product samples), • Mileage reimbursement, • Full benefits package including medical, dental, vision, 401(k), and paid time off, • Growth opportunities within a national brand If you’re driven, people-focused, and ready to take control of your income, apply today and start building your career with 3 Day Blinds. #West1 By submitting your application below, you are providing your prior consent to receive SMS messages to notify you of any updates to your application status and to engage in discussion throughout your application process. You can cancel the SMS service at any time. Just text “STOP” to any of our texts to unsubscribe. Message & data rates may apply. Message frequency may vary. If you have any questions regarding privacy, please read our privacy policy, https://www.hunterdouglas.com/privacy-policy or terms of use https://www.hunterdouglas.com/terms-of-use

Job Description Comfort starts with our 10,000+ team members across the globe, who are transforming the power of comfort every day. Our employees have the power to change lives, in our homes, work and communities. We foster an inclusive environment while honoring a legacy built on family, where everyone can be themselves. If you are ready to join an industry leading organization where our people are the most important asset, and innovation propels us into the future, you’re ready to take your seat at La-Z-Boy Incorporated. WE BELIEVE IN THE TRANSFORMATIONAL POWER OF COMFORT! Job Summary: Join our dynamic team and embark on a rewarding career where your ambition drives your success. Competitive earnings potential: includes an hourly base wage plus UNCAPPED commissions on all Sales. Responsible for creating sales utilizing exceptional customer service and knowledge of the La‐Z‐Boy selling process, products and services. Strive to create long‐term customer relationships that will lead to increased sales and profitability. Develop awareness of interior design through practical experience, observation and interaction with a La‐Z‐Boy Designer. Training Pay: $21 per hour for 2-6 weeks (no commissions) Average Annual Earning Potential After Training: $45,000 - $65,000+ (inclusive of base, bonus, and commission) Job Description: ✨ Sell Luxury. Live Modern. Earn Without Limits. ✨ Now Hiring: Sales Consultant – La-Z-Boy Furniture Galleries Location: Costa Mesa, CA Compensation: Base + Unlimited Commission La-Z-Boy isn’t just comfort — it’s modern, elevated, and unmistakably stylish. We’ve redefined the way people see furniture, and now we’re looking for someone who can match that energy on the sales floor. This is your chance to turn your natural charm, eye for design, and competitive drive into real results — and real income. What You’ll Be Doing: Guiding high-end clients through a premium sales experience. Creating inspired spaces with world-class furniture and décor. Curating luxury looks while earning commissions with no ceiling. What You’ll Get: A sleek, modern showroom that feels more like a gallery than a store. Ongoing training in luxury sales, interior trends, and design consultation. Exclusive employee discounts so your own space turns heads. A brand that sells itself — and a team that celebrates success. Who You Are: Polished, persuasive, and endlessly ambitious. Passionate about modern aesthetics and premium materials. Obsessed with detail, service, and delivering the wow factor. Experienced in sales or retail (luxury experience = a major plus). You don’t do average — and neither do we. This is your chance to turn your love for modern luxury into a high-reward career. Apply today. Curate beauty. Sell bold. Earn big. What You Can Expect: • Training Pay: $21 per hour for 2-6 weeks (no commission), • Average Annual Earning Potential After Training: $45,000 - $65,000+ (inclusive of base, bonus, and commission), • The company will not pay less than state/local minimum wage requirements Post-Training Pay: • Base Pay: $18 per hour, • Commission & Bonus: Earn more with UNCAPPED commission on written sales - 3% on La-Z-Boy Design Sales and 2% on other sales, other than La-Z-Boy Design Sales. Quarterly bonus opportunity of $1,500, based on your ability to meet defined individual sales goals. BENEFITS: Health Insurance through Blue Cross/Blue Shield Optum for Prescriptions In-Network Dental and Vision Insurance Paid Vacation 401k with match Disability Insurance Life Insurance and AD&D Paid Bonding Leave Paid Training Health Savings Account - Contributions go in tax-free, grow tax-free and are withdrawn tax-free Tuition Reimbursement (may receive up to $5,250 per calendar year) Employee Assistance Program (Free to all employees!) Counseling sessions Financial and legal resources KEY RESPONSIBILITIES (other duties as assigned): Drives Sales • Contribute to store sales goals by selling furniture, accessories and services offered by La‐Z‐Boy, • Promote the Design program & assist the Designer to achieve established Design program sales goals, • Consistently execute the La‐Z‐Boy selling process and strive to provide a favorable experience to all customers., • Develop and utilize sales skills and principals including approach, rapport building, needs discovery, customized portfolio presentations, answering objections, closing, follow‐up, after sale service and continuing contact with all previous and potential customers, • Maximize store promotions, marketing initiatives, and grassroots programs, • Maintain strong knowledge of the features and benefits of existing and new product lines Design Program • Schedule professional home consultations to present customized room designs, including sample fabrics, furniture, tables and accessory recommendations as well as the benefits of a professional installation service., • Execute and champion the Design process following the established company guidelines, • Responsible for supporting design related functions in the store Customer Focus • Provide the highest level of customer service to all current and future customers, • Ensure that each La‐Z‐Boy customer has an informative and positive experience by using good customer service skills and knowledge of products, while following the company selling process, • Effectively use Podium to ensure customer satisfaction and future follow‐up, • Make sound business decisions to deliver customer satisfaction and promote team environment, • Provide support by being responsive to incoming phone calls and emails, • Assist in handling customer issues and/or complaints. Provide appropriate solutions and alternatives to the customer to achieve a satisfied experience People • Maintain a positive working relationship with all store employees, • Assist to train, coach and develop new peers on La‐Z‐Boy product knowledge and selling process/skills to achieve store sales goals, • Help promote and champion a culture of sales and service Operational Excellence • Assist with maintenance of the overall visual appearance of store, this includes but is not limited to maintaining floor and/or showroom displays, tagging products and accessories, maintaining accessory catalogs and design center fabrics, supporting floor moves, and maintaining general store cleanliness, • Accurately complete order information, collect deposits and fees, keep orderly customer records, and research customer payments and deliveries, • Responsible for accurately completing daily On‐Point system logs, • Show a sense of urgency, enthusiasm and excitement with the store team and customers, • Maintain adequate knowledge of company standards, product knowledge and internal processes and systems, • Consistently schedule deliveries with customers, • Responsible for opening and closing of the store MINIMUM REQUIREMENTS: • High School Diploma or equivalent, • Previous selling experience and ability to close a sale strongly preferred, • Excellent communication, customer service skills, and organizational skills, • Strong interpersonal skills to effectively communicate, build rapport, and positively influence, • Demonstrated persuasion and negotiation skills, • Ability to effectively manage time and conflicting priorities, • Ability to effectively and productively with others as a team, • Ability to work the schedule and hours dictated by business needs, • Ability to work evenings, weekends and holidays as required, • Initiative to meet assigned goals, missions and objectives and motivated to achieve more, • Strong attention to detail, • Proficient in the use of Microsoft Office, including Word, Excel, Outlook and PowerPoint PREFERRED REQUIREMENTS: • Bachelor’s degree in Business or a related field SUPERVISORY RESPONSIBILITIES: None PHYSICAL DEMANDS/WORK ENVIRONMENT: • Ability to lift and/or carry up to 50 pounds., • Ability to stand for long periods of time., • Nearly continuous use of repetitive hand motions, hearing and listening., • Often required to sit, walk, bend and stoop, • Subject to inside environmental conditions, • Ability to pass background and drug screen. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the incumbent for this job. Duties, responsibilities and activities may change at any time with or without notice. At La-Z-Boy, we prioritize clear communication and reward outstanding talent! We invite you to explore the exciting opportunities available. To help you make an informed decision, we’re sharing key information about our pay practices. Individual pay is based on various factors, including geographic location, personal performance and relevant qualifications, experience, and skills. By providing our salary ranges and compensation range details, we aim to foster understanding and confidence in our pay practices. Should the base rate plus the commissions earned during a performance period not be at or greater than location minimum wage requirements for the period, the company will make a minimum wage adjustment for the employee to be compliant with minimum wage for the location. Weekly Hours: 40 Benefits for Employees in the US: Benefit offerings to employees and their families include: Medical, Vision, Dental and Basic Life Insurance, available 401k retirement plan with company match of up to 6%. Paid time off includes: 9-11 paid holidays each year, two weeks’ prorated vacation as a new hire and either personal time (non-exempt only) or state mandated sick time. More information can be found via: https://learn.bswift.com/la-z-boy If this role requires travel / driving in order to perform the key responsibilities outlined above, candidates must be able to meet the qualifications noted in the company’s Driver Management Program to be considered for the role. At La-Z-Boy Incorporated, we're an equal opportunity employer. We understand that our employees’ diverse backgrounds, experiences, perspectives, and viewpoints add value to our ability to create and deliver the best possible service, quality products, and is of utmost importance as we work together to build comfort. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We are committed to fostering an environment in which all employees feel valued, included, and empowered to do their best work and bring great ideas to the table. If you are a qualified individual that may need a change or adjustment to the application/interviewing/hiring process as a result of your disability, you may request a reasonable accommodations by emailing our recruiting team at recruiting@la-z-boy.com or by calling 734-242-1444.

We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information

Job Description JOB SUMMARY: The Fire Systems Technician (Power/Energy/Industrial) installs, inspects, and repairs fire alarm, sprinkler, suppression, and related safety systems in industrial and energy environments. The role works with advanced technologies including off-gas detection, thermal imaging, and BESS systems. Strong electrical and troubleshooting skills are essential to ensure safe, compliant system performance. Travel and work in varied industrial conditions are required. ESSENTIAL JOB DUTIES: • Install, inspect, maintain, and repair fire alarm, sprinkler, and suppression systems in commercial, industrial, and energy-sector environments., • Work with specialized technologies including off-gas detection, thermal runaway systems, fixed aerosol extinguishing systems, water mist systems, and thermal imaging devices., • Support Battery Energy Storage Systems (BESS) installation, monitoring, and service., • Conduct break/fix repairs during routine maintenance., • Perform electrical wiring, troubleshooting, and schematic reading, • Communicate with internal and external customers in a professional manner., • Required to be punctual to required work locations and complete scheduled projects in timely manner., • Understand and follow SFS’s Safety program, SDS book, Hazardous communication program, policies and procedures. Participate in weekly Toolbox talks. Employee must always know location all related safety documentation on each project., • Ensure company provided vehicle is clean and well maintained as required by company policies., • Periodically attend seminars or similar education/training sessions to stay abreast of latest technology, codes, and standards changes., • Respond to short-notice travel needs within the region., • Accept assignments in remote locations as required., • Work in outdoor and industrial conditions including noise, heights, heat, rain, wind, and low-light environments., • Other duties may be assigned. QUALIFICATIONS The qualifications listed below are representative of the elements required to perform the job successfully, however in some cases, an equivalent combination of Education, Training, Certifications and Experience may meet the job qualifications. Education, Training, Certifications: • High School Diploma or GED required., • Technical or vocational degree preferred., • NICET certifications in Fire Alarm, Sprinkler, or Suppression preferred., • OSHA 10/30 Construction Safety required., • NABCEP Energy Storage Installation Professional (ESIP) preferred., • NFPA 70E Electrical Safety training preferred., • Relevant State/Local/AHJ certifications (e.g., California Blue Card, Sprinkler Fitter Card). Experience, Knowledge, Skill Requirements: • Knowledge of applicable fire codes and standards (NFPA 10, 13, 25, 68, 69, 72, 750, 855, 2001, 2010; UL 9540)., • Experience with fire system manufacturers such as Notifier, Fike, Xtralis, Honeywell Analytics, Potter, Siemens, Mobotix Thermal Cameras, and Li-ion Tamer., • Strong troubleshooting, electrical, and technical skills with the ability to interpret schematics and technical drawings. Communication Skills: • Must have the ability to effectively read, write and communicate in English with employees and customers. Systems and Software Skills: • Ability to operate a computer and advanced Microsoft Office (Excel, Word, Outlook) experience, required. Other Qualifications: • Valid driver’s license with acceptable driving record required., • Must be able to comply with SFS’s Drug and Alcohol policy and Background screening requirements, which may also include customer specific requirements based on contractual agreement. PHYSICAL & WORK ENVIRONMENT REQUIREMENTS Reasonable accommodation may be made to enable individuals with disabilities to perform Essential Job Duties. Physical Requirements: While performing the duties of this job, the employee is frequently required to bend, balance, ascend and descend step stools, ladders and stairs, kneel, lift >50lbs, reach above and below shoulders, stand and walk, crouch, kneel, and drive for extended periods of time. Employee is required to see in color, close and far distances, peripheral, depth, and adjust focus. Work Environment: Employees will regularly be required to work outside, and be exposed to hot/cold temperatures, dust, fumes, chemicals, electrical hazards and noise. Employee will occasionally be required to work indoors in an office setting, work alone and with others. Employee must consistently wear all appropriate personal protective equipment, as required by company safety policies while visiting locations. We are fully committed to equal opportunities for employment to all individuals regardless of race, national origin, gender, religion, sexual orientation, disability, familial status, and any other classification protected under the law. We are an Equal Opportunity, Affirmative Action employer. While this job description is intended to be an accurate reflection of the position, management reserves the right to modify, add, or remove duties and to assign other duties as necessary. #LI-BH1 #ZR

Job Description Facilities Maintenance HVAC Technician Reports To: Corporate Director of Facilities Location: Multi-site (Corona HQ + All 7 Hospital Campuses) FLSA Status: Non-Exempt Salary: $68,640 to $108,160 annually Position Summary The Facilities Maintenance HVAC Technician is responsible for the maintenance, repair, and troubleshooting of commercial heating, ventilation, air conditioning, and refrigeration (HVAC/R) systems across KPC Health’s seven hospitals and affiliated buildings in Orange, Riverside, and San Bernardino counties. The technician ensures that HVAC systems operate efficiently, safely, and in compliance with regulatory standards to support critical healthcare environments. Key Responsibilities • Inspect, troubleshoot, and repair HVAC/R equipment including chillers, boilers, air handlers, VAV boxes, exhaust systems, and thermostats., • Perform scheduled preventive maintenance on HVAC systems across all campuses., • Monitor and adjust building automation systems (BAS) to ensure energy efficiency and comfort., • Maintain refrigerant logs and ensure compliance with EPA and Title 24 regulations., • Respond to emergency calls across KPC hospitals and affiliated buildings., • Maintain documentation of inspections, repairs, and system performance., • Supervise temporary HVAC staff or vendors and coordinate outsourced services., • Collaborate with multidisciplinary teams to minimize downtime in patient care areas., • Maintain tools, inventory, and parts for efficient service delivery., • Follow all applicable safety, infection control, and hospital regulatory protocols., • Other duties as assigned. Qualifications • Minimum 3 years of commercial HVAC experience required; healthcare or multi-building experience strongly preferred., • High school diploma or equivalent required., • EPA Universal Refrigerant Certification required., • Valid CA Driver’s License and reliable transportation., • Strong understanding of HVAC codes, safety standards, and control systems., • Familiarity with computerized maintenance management systems (CMMS) preferred.

Ryder is Now Hiring Local CDL-A Truck Drivers in Rialto, CAEarn $1,040+ per Week - Home Daily!Comprehensive Benefits - Paid Weekly\n Pay, Home Time & More:\n\n • Earn $1,040+ per week\n, • Hourly pay: $26.00 per hour\n, • Hours per week: 40 hours per week\n, • Route: Home daily\n, • Medical, Dental & Vision after 30 days\n, • 80 hours PTO your first year, starting Day 1 (use it or get paid for it)\n\n Schedule, Freight & Equipment:\n\n • Schedule: Sunday - Thursday\n, • Start time: 8:00 PM - 1:00 AM dispatch\n, • Deliver solo to: Rialto as far south as Santa Maria; LA Area; Palm Springs\n, • Tractor type: Day cab\n, • Trailer type: Dry van, 53'\n, • Equipment: Pallet jack\n, • Freight: No-touch – Office products\n, • Endorsements: HAZMAT - Must obtain within 90 days of hire\n\n Additional Benefits of Driving with Ryder:\n\n • Uniforms & boot allowance provided\n, • Unlimited driver referral bonuses - earn up to $1,500 for every hired driver\n, • Drivers are the Captain — you make safety decisions, and your job is protected \n, • 401(k) rollover available now + company match at 1 year\n, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)\n, • Employee discounts on tools, vehicles, travel, tech & more\n, • Trucks are 36 months or newer, include 24/7 Roadside Maintenance, and Company Drivers fuel up the trucks at over 800 Maintenance Facilities Nationwide\n, • Drivers paid weekly\n, • Paid training\n\n Requirements:\n\n • Valid CDL-A\n, • 9 months of driving experience within the past 3 years\n, • Minimum 21 years of age\n, • Pass a Ryder drug test\n, • Pass a Ryder Background and Motor vehicle check, including drug and alcohol verification from previous employers for the last 3 years\n, • Pass a DOT physical and Ryder road test\n\n About Ryder:\n Ryder is a commercial transportation, logistics, and supply chain management solutions company in business for over 80 years. As one of our drivers, you represent the heart of our mission and that's something we reward, admire, and appreciate. In support of that, we give you the benefits, resources, and flexibility you need to make your career journey a safe, rewarding, and successful one. \n Start Your Career with Ryder - Apply Now!\n \n Ryder is an Equal Opportunity Employer and Drug-Free Workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, status as a protected veteran, among other things, or status as a qualified individual with a disability. \n \n (*This form is considered to be a submission of interest to Ryder and is NOT a formal application of employment.)

Job Description Job Title: Helper Ventilation Job Description The Helper Ventilation role supports the installation, cleaning, and maintenance of air cleaning and ventilation systems in industrial, commercial, hotel, restaurant, and casino environments. This position focuses on the ventilation side of HVAC, including hands-on work with filters, ductwork, and basic electrical tasks. It is a physically active, field-based role that offers on-the-job training for entry-level candidates interested in learning installation, wiring, and repair of ventilation systems. 3rd shift - Sunday to Wednesday night Shift $21/hr Entry Level - Mechanically Inclined HVAC cert is great Responsibilities • Clean ventilation units and air cleaning systems in manufacturing, hotel, restaurant, commercial, industrial, and casino facilities., • Support the changeover to more eco-friendly filters by removing, replacing, and installing ventilation filters., • Use hand tools to perform basic installation, cleaning, and maintenance tasks on ventilation and duct systems., • Lift and move ventilation systems, filters, and related materials as part of daily duties., • Perform air duct cleaning and general labor tasks, including handling materials and keeping work areas organized., • Assist with HVAC installation work focused on the ventilation portion, excluding refrigeration and cooling systems., • Learn and support basic wiring, electrical work, and installation of ventilation units under supervision., • Help with minor repair tasks on air cleaning and ventilation systems as directed by experienced technicians., • Travel regularly with the team to client sites across a wide geographic area, including locations from Santa Barbara to San Diego and parts of the Inland Empire., • Work an overnight 4/10 schedule, starting Sunday night and working shifts between 6:00 p.m. and 6:00 a.m., • Collaborate effectively as a team player, communicate clearly with colleagues, and follow instructions and safety guidelines., • Maintain a professional and presentable appearance while performing physically demanding and dirty ventilation work., • Adhere to company policies, including safe vehicle use while riding in company vehicles to job sites. Essential Skills • Ability to perform physically demanding work, including lifting ventilation systems and materials and working in dirty or dusty environments., • Comfort working with hand tools for installation, cleaning, and basic repair tasks., • Willingness to work with ventilation systems and air ducts, focusing on the HVAC ventilation side without refrigeration or cooling responsibilities., • Readiness to perform general labor duties, including air duct cleaning, material handling, and basic wiring support., • Strong self-motivation with the ability to take initiative and stay productive throughout long shifts., • Team-oriented mindset with the ability to work cooperatively and reliably with coworkers and supervisors., • Comfort with heavy travel to multiple job sites across a broad region, including Santa Barbara, San Diego, Orange County, and Inland Empire areas., • Ability to work overnight shifts on a 4/10 schedule, starting Sunday night, within the 6:00 p.m. to 6:00 a.m. time window., • Clean DMV record, as required to ride in and potentially operate company vehicles in accordance with company policies., • Professional and presentable demeanor while working on-site at customer locations. Additional Skills & Qualifications • Trade school education or vocational training in HVAC, electrical, or related fields is a strong plus but not required., • Interest in learning HVAC installation, particularly the ventilation portion, including ductwork and air cleaning systems., • Willingness to learn basic electrical systems, wiring, and installation practices for ventilation units., • Experience with general labor, cleaning, repair, or maintenance work in industrial or commercial settings is beneficial., • Ability to follow detailed instructions and safety procedures while working with tools and equipment., • Reliable attendance and punctuality, especially for overnight and travel-based work schedules. Why Work Here? This opportunity offers entry-level candidates the chance to build practical skills through structured on-the-job training in a specialized area of HVAC. You gain exposure to a variety of industrial and commercial environments, work with experienced technicians, and learn valuable installation, wiring, and repair skills that can support long-term career growth. The company emphasizes hands-on learning, consistent work, and the opportunity to develop a strong foundation in ventilation and air cleaning systems. Work Environment The work environment centers around installing, cleaning, and servicing air cleaning and ventilation systems in industrial, commercial, restaurant, hotel, and casino buildings. The role focuses strictly on the ventilation side of HVAC, with no refrigeration or cooling work. Helpers work primarily in the field at customer sites, performing tasks such as changing filters, assisting with materials, cleaning air ducts, and learning electrical systems and wiring. The job involves working in dusty or dirty conditions, handling tools and equipment, and performing physically demanding tasks, often during overnight shifts. Travel is frequent and can extend across a wide region from Santa Barbara to San Diego and into the Inland Empire, with transportation provided in company vehicles. A presentable appearance is expected while on-site, even though the nature of the work is hands-on and labor-intensive. Job Type & Location This is a Contract to Hire position based out of Santa Ana, CA. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Santa Ana,CA. Application Deadline This position is anticipated to close on Oct 4, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Meaningful work. Rewarding career. Make an impact providing expert financial advice with heart. Thrivent is a different kind of financial services firm, one that puts generosity at the center of saving and investing. Here, you’ll make an impact in the lives of the people you serve, helping them build, grow and protect financial well-being through purpose-based advice, investments, insurance, banking and generosity. At Thrivent, you’ll receive the support, stability and opportunity of a Fortune 500 leader. We offer up to 14 weeks of paid training and coaching as you obtain your state insurance licenses (life, health & variable contracts), Series 7 and 66 registrations, and complete Thrivent’s comprehensive advisor onboarding program. After onboarding, you’ll have control over the income you earn, as you’ll be paid through commissions and incentives based on your success. Job Description As a Thrivent Financial advisor, you’ll: • Build a financial practice guiding Christians on their journeys to financial clarity, empowering lives of service and faith., • Provide personal, actionable and achievable advice and connect clients to Thrivent products and programs., • Develop and maintain genuine, long-term relationships throughout generations based on trust and understanding, with the ability to serve clients in your chosen community., • Make client appointments by leveraging your network and Thrivent’s reputation, delivering award-winning financial workshops and marketing your practice., • Have the flexibility to control your schedule, allowing for work-life balance., • Find a collaborative culture with colleagues who want you to be successful and are willing to help you do so., • Get the support of specialists from every facet of the organization—such as business development, marketing, technology, engagement, and experienced advisors—as you build your business. Desired Characteristics Our culture and our people are special. We’re looking for people who are – or want to become – part of the communities where clients live, work and worship. Whether you’re a seasoned financial professional or looking for a career change, you could be a successful Thrivent Financial advisor if you’re: • Self-disciplined, independent and driven to succeed., • Motivated by helping others and seeing them achieve their goals., • A natural coach or guide with strong interpersonal skills., • Passionate about living a life of generosity by serving others, not just selling products. Successful Thrivent financial advisors have come from a variety of career backgrounds, including outside sales, business management, education, ministry, hospitality, military and more. Skills acquired in these fields transition well into the financial advisor role. Requirements • Bachelor’s degree or equivalent experience. Military veterans are encouraged to apply., • Attainment of FINRA SIE, life and health licenses (licensed role only) before contracting., • Satisfactory background check, fingerprinting and securities registration and/or insurance licensing verification, if applicable. Compensation and Benefits You’ll get all the benefits of a Fortune 500 organization and more. Here, you’ll enjoy: • Unlimited earning potential through biweekly base commissions, bonus opportunities and incentive pay structures, recurring revenue streams, and dedicated planning fees for those who qualify., • Medical, dental, vision, disability and accidental death and dismemberment insurance., • Pension, 401(k) and retiree medical plans., • Ongoing support, training and opportunity for professional growth as you build your business., • Well-being programs to help you manage your physical, emotional and financial health., • Gift matching program to double your contributions to eligible nonprofit organizations and volunteer programs that support your efforts to make a difference., • Membership programs that help you connect with your clients and engage Christians to make a real impact in your community. About Thrivent Thrivent is a diversified financial services organization that, with its subsidiary and affiliate companies, serves more than 2.4 million clients, offering advice, insurance, investments, banking and generosity products and programs. For more than 100 years, Thrivent has been helping Christians build their financial futures and live more generous lives. Today, Thrivent is a not-for-profit, membership-owned Fortune 500 company with $179 billion in assets under management/advisement (as of 12/31/23). Thrivent carries ratings from independent rating agencies which demonstrate the strength and stability of the organization, including an A++ rating from AM Best; an Aa2 rating from Moody's Investors Service; and an AA+ rating from S&P Global Ratings. Ratings are based on Thrivent's financial strength and claims-paying ability, but do not apply to investment product performance. Thrivent values diversity and inclusion, and we’re committed to providing an Equal Employment Opportunity (EEO) without regard to race, religion, color, gender, gender identity, national origin, age, disability, marital status, citizenship status, military or veteran status, sexual orientation, sex, genetic information, or any other status or condition protected by applicable state or federal laws. This policy applies to all employees and job applicants. To learn more about the privacy of your information, visit our workforce privacy policy at thrivent.com/privacy. Thrivent is the marketing name for Thrivent Financial for Lutherans. Insurance products, securities and investment advisory services are provided by appropriately appointed and licensed financial advisors and professionals. Only individuals who are financial advisors are credentialed to provide investment advisory services. Visit Thrivent.com or FINRA’s Broker Check for more information about our financial advisors.

Job Description About This Role An independent financial advisory practice affiliated with an independent broker-dealer is seeking a Financial Advisor Assistant to support with day-to-day client service and office operations. We exist to help our clients build toward a retirement free from money worry — and we care just as much about helping the people on our team build real careers along the way. This is an in-person, client-facing role based in our Irvine office, best suited to someone who brings genuine optimism to their work, values steady, consistent effort that compounds over time, adapts without giving up on the goal, and takes real pride in doing right by the people they serve. Fluency in Mandarin is required, as we serve a significant Mandarin-speaking client base. In This Role You Will • Serve as a point of contact for clients via phone, email, and in person — in both English and Mandarin, • Schedule and prepare for client and prospect meetings, including agendas and follow-up materials, • Process new account paperwork, transfers, beneficiary updates, and other account servicing forms, • Maintain and update client records in the CRM, keeping contact information, notes, and workflows current, • Prepare client review packets and correspondence ahead of meetings, • Coordinate with the broker-dealer and custodian on account servicing requests, • Support client onboarding, filing, and recordkeeping to meet firm and broker-dealer compliance requirements, • Assist with marketing efforts and client events, • Perform other duties and tasks as assigned by the Financial Advisor Required Qualifications • 1+ year of office administrative or client service experience, • Intermediate Microsoft Office (Word, Excel, Outlook, and PowerPoint) skills Desired Qualifications • Financial services industry experience — banking, wealth management, insurance, or similar Growth & Development We're looking for someone who wants to grow with us long-term. For the right fit, there's room to take on more over time — potentially including support toward licensing as your role and our practice evolve together. Job Expectations • Employment is contingent upon successful completion of a background check, required by our broker-dealer, conducted after a conditional offer of employment, • This role is also subject to our broker-dealer’s ongoing regulatory requirements, including but not limited to periodic screening., • This position is not eligible for visa sponsorship Benefits • Monthly reimbursement toward medical, dental, and vision premiums, • Paid sick leave and paid federal holidays Equal Opportunity Michael Shieh provides equal employment opportunity to all applicants without regard to race, color, religion, sex, gender identity or expression, sexual orientation, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital status, military or veteran status, or any other characteristic protected by applicable federal, state, or local law.

Bus Driver We are currently on the lookout for an experienced Bus Driver to join our elite team in Irvine, CA . As a key member, you will be entrusted with ensuring safe and comfortable transportation for our passengers, while upholding the highest standards of professionalism and customer service. Transdev is proud to offer: Position Subject to Collective Bargaining Agreement: • $21.72 - $29.42 / hr, • Starting pay $21.72 with progression to $29.42 over 4 years. Benefits include: • An excellent benefits package including medical, vision, and dental coverage, and 401 (k) savings plan, • Paid holidays, vacation, and sick time Benefits may vary depending on location policy. The above represents the standard Corporate Policy. Key Responsibilities: • Safety-Focused Operations: Execute flawless operations by meticulously following designated routes and schedules, while adhering to stringent safety protocols and traffic regulations., • Passenger Care: Exhibit exceptional care and assistance towards passengers, ensuring smooth boarding, comfortable rides, and timely disembarkation for all., • Vehicle Vigilance: Champion vehicle safety through comprehensive pre-trip and post-trip inspections, promptly reporting any maintenance issues, and maintaining the highest standards of cleanliness and safety equipment readiness., • Adherence to Protocols: Uphold company policies and procedures rigorously, encompassing seat belt enforcement, emergency response preparedness, and compliance with regulatory mandates., • Other duties as required Qualifications : • 21 years or older, • Minimum 3 years of driving experience (personal or professional), • Excellent communication & customer service skills., • Availability towork day, evening, and weekends., • Subject to a DOT drug testing and physical if applicable. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including cannabis, for any reason. Physical Requirements: • Must be able to work shifts or flexible work schedules as needed., • The employee is generally subjected to long periods spent sitting., • Work environment will be a combination of both indoors and outdoors. About Transdev : Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev – the mobility company – empowers the freedom to move every day thanks to safe, reliable, and innovative solutions that serve the common good. Find out more at www.TransdevNA.com or watch an overview video at https://youtu.be/ilO5cv0G4mQ The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Transdev complies with federal and state disability laws and makes reasonable accommodations for applicants and candidates with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, please contact us.HR.TalentAcquisition@transdev.com Drug-free workplace: Transdev maintains a drug-free workplace. Applicants must: • Be eligible to work in the United States without requiring sponsorship now or in the future (if based in the U.S.)., • Successfully pass a pre-employment drug screen. California applicants: Please Click Here for CA Employee Privacy Policy. Job Category: Driver/Operator - Bus, Paratransit, Taxi, Limo, Shuttle Job Type: Full Time Req ID: 8602 Pay Group: 2V9 Cost Center: 55373 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please _ for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev – the mobility company – empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or .

Job DescriptionMaster Plumber (Licensed) Full-Time Location: Los Angeles, CA; Lake Tahoe, CA; San Diego, CA; Seattle, WA 24/7 Emergency Plumbing & Drain Services About Our Client Our Client is a fast-growing, franchise-based emergency plumbing, drain cleaning, and water damage restoration company operating 24 hours a day, 365 days a year. With locations across the United States, Our Client is redefining the plumbing industry through honest, upfront pricing, rapid response times, and an unwavering commitment to customer satisfaction. Our Client is not just a plumbing company, it is a team of dedicated professionals who show up when it matters most. Position Summary Our Client is seeking a skilled and licensed Master Plumber to join our growing team. In this role, you will be the senior technical expert on the job site, responsible for diagnosing complex plumbing issues, overseeing installations and repairs, mentoring junior technicians, and ensuring all work meets state and local code requirements. This is a hands-on leadership role that blends technical expertise with outstanding customer service. Key Responsibilities • Diagnose, troubleshoot, and repair complex residential and commercial plumbing systems including pipes, fixtures, water heaters, sump pumps, and sewer lines, • Lead and perform installations of plumbing systems for new construction and remodel projects, • Respond to 24/7 emergency plumbing calls with urgency and professionalism, • Perform drain cleaning, hydro-jetting, video camera inspections, and excavation-related plumbing work, • Oversee and mentor apprentice and journeyman plumbers on job sites, • Ensure all work complies with applicable state, local, and municipal building codes and safety regulations, • Pull permits and coordinate inspections as required, • Communicate clearly with customers, explaining issues and solutions in plain language with upfront pricing, • Accurately document work completed, parts used, and time spent for billing and records, • Maintain company vehicles, tools, and equipment in proper working order, • Collaborate with dispatch and operations teams to prioritize and schedule service calls efficiently Requirements • Active Master Plumber license in the applicable state (required), • Minimum 7+ years of hands-on plumbing experience, with at least 2 years at the Master Plumber level, • Comprehensive knowledge of plumbing codes, standards, and best practices, • Experience with both residential and commercial plumbing systems, • Ability to read and interpret blueprints, schematics, and technical diagrams, • Strong problem-solving skills and ability to work independently in the field, • Excellent communication and customer service skills, • Valid driver's license with a clean driving record, • Ability to pass a background check and drug screening, • Physical ability to lift up to 50 lbs, work in confined spaces, and perform tasks requiring standing, kneeling, or crouching for extended periods Preferred Qualifications • Experience with water damage restoration services, • Familiarity with hydro-jetting equipment and sewer camera systems, • Prior experience in a franchise or multi-location service environment, • OSHA 10 or OSHA 30 certification, • EPA or other relevant trade certifications Compensation & Benefits Our Client offers a competitive compensation package designed to reward experience, performance, and dedication: • Competitive base salary commensurate with experience, • Performance-based bonuses and incentives, • Overtime opportunities; 24/7 operation means real earning potential, • Health, dental, and vision insurance, • Paid time off and holidays, • Company-supplied vehicle, tools, and uniforms, • Ongoing training and professional development opportunities, • Clear path for career advancement within a rapidly expanding company Why Join Our Client? Our Client was built on the belief that customers deserve honesty, urgency, and quality and so do our employees. We are a company that values our technicians and invests in their growth. When you join Our Client, you become part of a team that shows up, does the job right, and takes pride in making a difference for homeowners and businesses every single day. Our Client is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status

Job Description Fire Sprinkler Inspector/ Service Technician – Protect Commercial & Industrial Assets for Avalon Fire Protection Job Overview: • Company: Avalon Fire Protection, • Salary/Pay Rate: $30.00 - $50.00 per hour (based on experience), • Location: Anaheim, CA, • Job/Employment Type: Full Time, • Schedule: Monday – Friday, 6:00 AM – 5:00 PM (Occasional overtime/weekends) (8 hour work day, start time varies), • Project Scope: Commercial & Industrial Tenant Improvements and Life Safety Inspections, • Mandatory Licences & Certifications: Valid Driver's License, California Fire/Life Safety Certification or Sprinkler Fitter Certification preferred The Opportunity: You will serve as a core technical expert ensuring vital commercial and industrial systems remain fully code-compliant and operational. Joining a company that recognizes hard work through performance culture, mentorship, and solid perks, your daily impact directly safeguards businesses and saves lives across southern California. How You Will Make an Impact: • Execute rigorous inspections, testing, and maintenance of wet, dry, and pre-action fire sprinkler and fire alarm systems following NFPA guidelines., • Diagnose complex piping or pressure deficiencies and deliver high-quality repair solutions on active job sites., • Conduct detailed fire pump operational testing and hydrant flow checks, keeping meticulous digital records., • Perform tenant improvement projects efficiently while maintaining compliance with local fire codes., • Serve as a direct point of contact for clients, providing technical advice and fostering strong, long-term working relationships., • Maintain strict adherence to site safety protocols, including lift operation and fall protection procedures. Required Qualifications & Experience: • 3+ years of hands-on experience performing fire sprinkler inspection, troubleshooting, and field repairs., • Thorough operational knowledge of NFPA 13 and NFPA 25 standards., • Strong mechanical aptitude, technical diagnostic skills, and physical ability to work at heights or in tight spaces., • Valid driver's license with a safe driving record and willingness to travel locally., • High school diploma or GED equivalent. Preferred Qualifications & Experience: • NICET Certification in Water-Based Systems Layout or Inspection/Testing., • California Sprinkler Fitter Certification or Fire/Life Safety Certification., • Working knowledge of NFPA 72 fire alarm system inspection, testing, and cross-functional troubleshooting. Compensation & Benefits: • Competitive hourly pay with overtime potential and bi-weekly pay cycle., • Comprehensive medical, dental, and vision insurance coverage., • 401(k) retirement plan with employer matching., • Paid time off (holidays, vacation, sick days) plus paid parental leave., • Travel per diem and company vehicle provided for job-related transit., • Full safety gear, uniforms, and paid technical, manufacturer, and OSHA training programs provided., • Generous employee referral bonuses and team appreciation events. About Us: Avalon Fire Protection is a premier life safety contractor specializing in commercial and industrial fire protection solutions. We consider our people our greatest asset, prioritizing workplace safety, mentorship, continuous education, and an environment where high performance is consistently valued. Learn more at https://avalonfire.com/. Avalon Fire Protection is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The Soldering Operator within our Assembly department performs a wide variety of soldering tasks and electrical/mechanical product assembly operations on components, assemblies or subassemblies in accordance with IPC/EIA J-STD-001 requirements. What You'll Do: • Prepares soldering and assembly work by reviewing instructions and blueprint specifications and comparing boards with actual designs and documents, • Populates PCB based on work instructions, assembly drawings and bills of material, • Assembles components by positioning parts and subassemblies, examining connections for proper fit and fastening parts and subassemblies, • Cleans PCBs and assemblies throughout process and after completion, • Inspects all assembly work to ensure that all applicable requirements are met, • Signs off on the traveler, dates and enters quantity, scans out job, • Perform other job duties as needed What You'll Bring: • Ability to fluently read, write and speak English, • Hand soldering experience, • Attention to detail and accuracy, • Ability to work well under pressure, • Ability to use various assembly tools including microscope, • Excellent communication and interpersonal skills, • High level of flexibility and adaptability to changing requirements and priorities, • 20/20 correctable vision in one eye, • Must be able to work 1st Shift (7:30am - 4:00pm) Education and Experience: • High School Diploma, GED or comparable industry experience (Preferred), • 1 year assembly experience in a manufacturing environment (Preferred), • Experience with soldering and assembly of military components (Preferred) Please note that in addition to prolonged sitting, the work environment requires repetitive hand motion such as handling, grasping, holding, and finger dexterity. Schedule: • 1st Shift available (7:30am - 4:00pm), • Monday to Friday, • Overtime and Weekends as required Job Type: Full-time California Pay Range $18—$21 USD The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The Assembly Inspector is responsible for performing first article, in-process and final inspections of PCB assemblies. The Assembly Inspector also preps and documents information related to Assembly processes. What You'll Do • Reviews and analyzes customer drawing(s), SOPs, work instructions and requirements specified in the traveler packet to ensure compliance with specifications; performs visual inspections of printed circuit boards and cable assemblies under IPC J standards and/or customer specifications using magnification equipment and completes an inspection checklist; scans job into PROCIM, • Verifies calibration date for any measurement device used for inspection, • Verifies assembly traveler quantity count and notifies team lead of any issues, • Performs a first article inspection (FAI) on all first time build assemblies to verify compliance with applicable IPC/Military and customer specifications; generates AS9102 report, • Identifies and documents product defects; generates NCR form and notifies team lead, • Generates and completes a Certificate of Compliance (C of C), • Performs all other job duties as needed What You'll Bring • Ability to communicate clearly and effectively in English, • Ability to interpret customer drawings, requirements, SOPs, work instructions and manufacturing travelers, • Knowledge of Military, IPC J standards, • Knowledge of first article documentation and shipping standards, • Proficiency with standard Assembly equipment, • 20/20 correctable near vision in one eye, • High attention to details, • Problem solving skills Education and Experience: • High School Diploma or General Education Degree (GED) (Preferred), • Minimum of 2 years of Assembly inspection experience in PCB or electronics manufacturing and assembly industry (Required), • Certified or previously certified J-STD, NASA-STD, and/or IPC-610 (Required) Available Schedules • Monday through Friday, • 1st shift: 7:30am to 4:00pm, • Overtime and Saturdays as Required Job Type • Full Time / Permanent, • On Site California Pay Range $19—$23 USD The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job DescriptionDescription: The Company The Cristek group is seeking a talented team player to join our team at our Anaheim, CA facility. The successful candidate is committed to pushing the boundaries of interconnect technology performance and innovation. Join us and connect your career to the future! With over 40 years of expertise designing and manufacturing micro- miniature and nano-miniature connectors, complex cable assemblies, twist capsules and mechanisms, the Cristek group offers tailored solutions to seamlessly connect you to your mission. The Cristek group's consistent, near-perfect performance, has earned it a position as preferred supplier to several major military/aerospace prime contractors and is a testament to its ability to operate a process-disciplined and metric- based business while maintaining its customer-focused, entrepreneurial roots.Cristek is a Qnnect Company, a portfolio company of Arcline Investment Management, with revenues above $80 million and ~350 employees across multiple locations, is certified in many industry standards (AS9100, NADCAP, Etc.) and is compliant with U.S. government DFAR and ITAR requirements. The Position The Cable & Harness Assembler position will play a key role within a team that will work together to assemble our customer’s product. The ability to perform effectively in a manufacturing environment and in conjunction with meeting delivery schedules and customer requirements is critical to this position Requirements • This position will perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as cables and harnesses., • Ability to learn to use basic hand tools, cutters, wire strippers, hand crimpers, scissors, soldering iron, heat gun., • Keeping equipment in good working order by performing regular inspection, cleaning, servicing along with routine and preventative maintenance., • Ability to read and understand the customer drawings, parts list, wire list, specifications, and assembly router for step-by-step instructions on how to manufacture the wire harness and cable assembly, • Production of wire harness and cable assemblies using hand and/or power tools (including specialized crimpers, drills, soldering tools, screwdrivers, torque wrenches, wire strippers, precision measuring instruments, etc.), • Daily cable and harness techniques (wire cutting, cable prep and layup, connectorization, crimping, soldering, jacketing, braiding, molding, use of lacing tape and spot ties for open wire bundles, testing, etc.), • Make continuity checks on work in process and completed assemblies, • Conduct in-process inspections on product in accordance with quality specifications, • Testing and troubleshooting of subassemblies at 1st, 2nd and final test, • Ability to use Microsoft Access to check-out and check-in tools used during production, • Work collaboratively with Engineering team to correct and improve upon any documents related to the assembly process., • Perform a number of complex, sometimes repetitive, electro-mechanical assembly operations of wire harnessing parts, components and subassemblies, • Follows health and safety rules, properly uses provided safety equipment and exercises caution in all work activitiesEducation and Experience, • High School Diploma or Equivalent, • 3 to 5 years’ experience in a wire harness and cable assembly manufacturing environment, • Electro-Mechanical assembly experience, • Strong crimping, connectorization and soldering skills, • J-STD Certification is preferred but not required, • Must be able to work under a microscope for inspection purposesRequirements: Required Skills & Working Conditions • Must be able to pass Manual Dexterity requirements (handling small parts effectively, demonstrate fine motor skills and dexterity to manipulate tweezers, small pliers and parts with speed and precision), • Must possess sufficient hand and upper body strength and gross motor skills to route cable bundles of various sizes and weights, • Must be able to demonstrate Technical Literacy (ability to read and accurately interpret wiring diagrams, electrical schematics, BOM’s and blueprints or demonstrate the ability to learn this process), • Must follow strong safety standards, • Must possess attention to detail, • Must be able to work as part of a team, • Fluent in reading, writing and speaking/understanding English, • Must be able to pass Visual Acuity requirements (color, depth perception and field of vision), • This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee Physical Requirements • Required to stand/or sit for long periods of time. Performs limited intermittent physical exertion. Required to lift up to 10 pounds frequently and up to 30 pounds occasionally. Works under safe conditions with some occasional exposure to noise or heat. Performs general housekeeping duties daily in Cable Assembly areaAt Cristek, we strive to create an inclusive and supportive work environment, and our benefits package reflects this commitment. Some of our benefit offerings include: · Insurance benefits: We provide our employees with access to comprehensive medical, dental, and vision insurances to ensure they can prioritize their health and well-being.· Paid Time Off (PTO): We believe in the importance of work-life balance, so we offer generous PTO allowances that accrue with each pay period so that our employees can rest and recharge, spend time with family and friends, or pursue personal interests.· Paid Holidays: We recognize the importance of spending time with loved ones during holidays, so our employees receive paid holidays to celebrate and enjoy these moments.· Growth Participation Units (GPUs): We provide growth participation units (GPUs) to our employees, which represent a share of the company's growth and success. Our GPUs are issued to all employees and as we increase the value of our business, they grow in value as well. When the private equity firm that currently owns us sells the company, GPUs will be paid out, with all employees sharing in the profits from the sale.· 401(k) Matching: We offer up to 4% of 401(k) matching to help our employees save for their future.· Short-Term & Long-Term Disability Insurances: We want to ensure that our employees are protected in case of unexpected circumstances, and provide short-term & long-term disability insurances, entirely employer paid.· Tuition reimbursement: We believe in continuous learning and development and offer tuition reimbursement to support our employees' educational goals.· Additional perks: Our employees enjoy a range of additional benefits such as dependable work schedules, overtime opportunities, term life & AD&D insurance, etc. Qnnect and its affiliated companies are affirmative action/equal opportunity employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information.?Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionPosition: Maintenance ClerkCompany Name: AiLO LogisticsFLSA Status for Employee: Non-ExemptPosition Type: Full-TimeLocation: On-Site (Compton, CA)Formerly known as AJR Trucking, AiLO Logistics is redefining the future of logistics. Our rebrand represents more than a new name - it signals a strategic transformation rooted in innovation, technology, and excellence. As the logistics industry rapidly evolves to meet new customer expectations, AiLO is leading the charge by integrating artificial intelligence, automation, and data-driven efficiency into every aspect of our operations. Our new identity embodies our commitment to adaptability, sustainability, and operational excellence. At AiLO Logistics, we are building the future of transportation—smart, efficient, and people-focused. Position Summary:The Maintenance Clerk is an opportunity for a highly driven, detail-oriented and dependable individual. This role supports the Maintenance Department with invoice processing, purchase order tracking, vendor communication, fleet documentation, and administrative workflow tasks. This position plays an important role in maintaining accurate records, supporting month-end close requirements, and ensuring maintenance-related transactions are processed in accordance with company procedures and customer-specific requirements. Essential Job Functions & Responsibilities: • Process vendor invoices accurately and timely in the Transportation Management System (TMT)., • Review purchase orders, repair orders, receipts, and supporting documentation for accuracy and compliance., • Communicate professionally with vendors to resolve invoice discrepancies, missing documentation, pricing issues, or billing concerns., • Coordinate with Accounting to ensure invoices are approved and processed within required timelines., • Maintain and update the Purchase Order report daily to support visibility, accountability, and month-end close requirements., • Follow customer-specific Standard Operating Procedures (SOPs) for maintenance, invoice processing, documentation, and allowable billing terms., • Track, record, and file receipts for maintenance-related purchases., • Charge parts, materials, fuel, rentals, and other maintenance-related expenses accurately as needed., • Process assigned maintenance workflow tasks, including fuel invoices, rental support, asset movement, invoice support, and other assigned items., • Enter and validate mileage records in TMT for trucks and trailers as required., • Maintain organized records for registrations, titles, inspections, and other fleet documentation., • Provide administrative support to the Maintenance Department and assist with additional duties as assigned., • Perform additional duties, responsibilities, and special projects as assigned that support the needs of the Maintenance Department, overall business operations, and AiLO Logistics’ mission, vision, and commitment to operational excellence. Qualifications and Experience: • High school diploma or general education degree (GED) required., • 2 + years of prior experience in maintenance administration, invoice processing, accounting support, transportation, logistics, or fleet operations preferred., • Proficiency with Microsoft Excel, Word, Outlook, and related business systems., • Familiarity with accounting, inventory tracking, maintenance, or transportation management software preferred., • Strong organizational skills with the ability to manage multiple tasks, reports, and deadlines., • Strong written and verbal communication skills, including the ability to work professionally with vendors, Accounting, and internal departments., • High attention to detail and accuracy when processing invoices, purchase orders, receipts, and fleet documentation., • Ability to follow established SOPs, maintain confidential business records, and meet recurring deadlines., • Minimum typing speed of 40 words per minute. Compensation: • The base pay depends on experience ($20.00/hour - $23.00/hour). Schedule: • Monday – Friday, 9AM – 6PM (Some weekends). Benefits: • Employer-paid Medical, Dental, and Vision coverage., • Company-provided cell phone & laptop., • Life Insurance coverage., • 401(K) retirement plan., • Vacation and Sick Pay., • Employee Assistance Programs., • Excellent opportunities for career advancement within a fast-growing, innovation-driven logistics company. Join AiLO Logistics:This is an exciting opportunity to shape the future of an evolving logistics leader. The ideal candidate is a visionary operator with a passion for innovation, teamwork, and results. If you are ready to help lead AiLO Logistics into its next chapter of growth, we invite you to apply and join our journey toward redefining excellence in logistics.

Job DescriptionRBC Bearings Incorporated (NYSE: RBC) is a leading international manufacturer of highly engineered precision bearings and components for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and engineered components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 60 facilities, of which 43 are manufacturing facilities in ten countries and our market capitalization is approximately $14.5 billion. Please use the link below to apply for this position directly through our corporate website:https://recruiting.ultipro.com/ROL1001RBCAI/JobBoard/323503a8-be53-4e45-a425-31ab5d011434/Opportunity/OpportunityDetail?opportunityId=2b5e7a53-5823-4320-9816-c6073fbf78c2 JOB TITLE/LOCATION:Assembler - Mark & Pack – Santa Ana, CA Essential Functions of the Job: • Operate marking equipment including electro-etching units, laser engravers, dot peening units, and ink stampers to label parts accurately., • Inspect parts for correct identification and quality standards before and after marking., • Perform wrapping, boxing, and labeling of parts according to packaging specifications and customer requirements., • Maintain cleanliness and organization of workstations and equipment., • Follow safety protocols and production procedures to ensure a safe and efficient work environment., • Record job completion details and report any defects or equipment issues to supervisors. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: • High school diploma or General Education Degree (GED) required. Experience:, • 1-3 months related experience and/or training; or equivalent combination of education and experience. Knowledge/Skills/Abilities:, • Proficiency in operating marking equipment and tools., • Strong attention to detail for accurate labeling and defect detection., • Effective manual dexterity for wrapping and boxing parts efficiently., • Basic computer skills for logging work or referencing job instructions., • Good time management to meet production deadlines., • Ability to follow written and verbal instructions precisely., • Capability to lift and handle parts of varying sizes and weights up to 25lbs., • Ability to work independently or as part of a team., • Capacity to maintain focus during repetitive tasks., • Willingness to adapt to changing production needs. Physical & Environmental Factors:Physical Requirements: Standing for extended periods, repetitive hand and arm movements, lifting and carrying up to 25lbs, and manual dexterity for handling small components and operating marking equipment.Environmental Conditions: Exposure to industrial noise, working around marking chemicals (e.g., ink, etching solutions) with proper PPE, and temperature variations. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee’s pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $18.00 to $22.00/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #42.1-1

Job DescriptionDescription: Position Title: Hand Solder Technician II Department: Hand Solder Location: Santa Ana, CA FLSA Status: Non-Exempt, Full- Time Job Summary: The Hand Solder Technician II is responsible for performing precision hand soldering of electronic components on printed circuit boards (PCBs) in accordance with IPC standards. This intermediate-level role requires strong soldering skills, attention to detail, and the ability to interpret assembly documentation. The Technician ensures that assemblies meet quality, reliability, and production standards. Key Responsibilities: · Perform through-hole and surface mount (SMT) hand soldering on PCBs using appropriate tools and techniques. · Read and interpret assembly drawings, schematics, and work instructions. · Inspect solder joints for conformance to IPC-A-610 and company standards. · Rework and repair defective solder joints and components as needed. · Operate under magnification (e.g., microscopes, magnifiers) for detailed soldering tasks. · Maintain accurate production records and ensure documentation is completed properly. · Follow safety protocols and ESD (electrostatic discharge) procedures. · Work collaboratively with all necessary teams to resolve assembly issues. · Support continuous improvement efforts in production processes and product quality. · Intermediate level BCA rework utilizing hot air and IR equipment/machines. Qualifications: · High school diploma or equivalent; technical training or certification in soldering (preferred) · minimum of 2 years of experience in hand soldering in a manufacturing or electronics environment. · Proficient in IPC-A-610 soldering standards; IPC J-STD-001 certification is a plus. · Ability to work with small components and use hand tools with precision. · Strong attention to detail and manual dexterity. Physical Requirements: · Ability to stand and sit for long periods and occasionally lift up to 25 lbs. · Manual dexterity to handle small components and operate equipment. --- This job description is intended to provide a clear overview of the primary duties and responsibilities for the Hand Solder Technician II position. It is not an exhaustive list, and other tasks may be required as needed to support the company’s operations. Regal Technology Partners is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state, or local laws. We strive to create an inclusive and diverse work environment where everyone is valued and respected. If you require any accommodation during the application process or have any questions regarding our EEO policies, please contact Human Resources, hr@regaltechnology.com Requirements:

Job DescriptionRBC Bearings Incorporated (NYSE: RBC) is a leading international manufacturer of highly engineered precision bearings and components for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and engineered components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 60 facilities, of which 43 are manufacturing facilities in ten countries and our market capitalization is approximately $14.5 billion. Please use the link below to apply for this position directly through our corporate website: https://recruiting.ultipro.com/ROL1001RBCAI/JobBoard/323503a8-be53-4e45-a425-31ab5d011434/Opportunity/OpportunityDetail?opportunityId=0fe468e7-e49a-48e8-ad81-6be3680ecfe2 Job Title/Location: Assembler - Bond Room – Santa Ana, CA Essential Functions of the Job: • Applies adhesive, installs liner, and trims product., • Masks surfaces to prepare items for bonding., • Must have the ability to use basic hand tools, for example, knives, tweezers, swabs, plug gages and micrometers., • Must be able to work around various machines such as coating tables, ovens, and presses., • Must be able to manage time effectively and work on various tasks at once. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: • High School diploma or General Education Degree (GED) required. Experience: • 0-3 years related experience., • Experience working with resins and chemicals is a plus., • Experience as an assembler is a plus. Knowledge/Skills/Abilities: • Must be a quick learner., • Strong attention to detail., • Ability to follow written and oral instructions. Physical and Environmental Elements: While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. Also, the employee is regularly required to sit and talk or to hear. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident ["green card" holders] or have refugee or asylee status. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $18.00 to $20.00/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #34.2-1

Job DescriptionSalary Range: $17.00 To 19.00 Hourly - TEMP TO HIRE POSITION Waev Inc. is an electric mobility OEM founded in 2021 to manufacture, distribute, market, and support the GEM, Taylor-Dunn and Tiger brands. GEM was the first commercially-produced, street-legal low-speed vehicle in the United States. GEMs shuttle people and goods across city centers, residential communities, government campuses, colleges and universities, and other micro-environments. Founded in 1949, Taylor-Dunn burden carriers, personnel carriers, and stockchasers have been trusted solutions in a broad range of commercial environments and provide premium reliability, safety features, and all-electric efficiency for industrial grade applications. Tiger heavy-duty tow tractors have been towing cargo, baggage, parcel, and other equipment in ground support applications since 1981. Waev's headquarters and factory are located in Anaheim, California. JOB SUMMARY Perform a wide variety of tasks as assigned, including preparing or building up vehicle parts, sub-systems, and components. Install subsystems, parts, and components into an on-road vehicle on a moving assembly line and perform inspections to ensure good quality. The first section below outlines the essential functions of the Assembler job. Assemblers must be able to perform these functions, with or without a reasonable accommodation. Duties and Responsibilities: • Safely use and operate various tools including power tools, hoists, and production equipment., • Accurately complete paperwork required for production records., • Ability to read, understand, and follow established processes and instructions., • Perform duties assigned by Supervisor and/or Group Leader., • Follow all safety rules and regulations strictly and maintain a clean and orderly work area., • Maintain a consistent pace throughout the shift with focus on quality (i.e., within applicable quality standards)., • Participate in continuous improvement process., • Work overtime as required and mandated by production schedules., • Maintain regular, reliable attendance. Physical Requirements: • Ability to lift up to 40 lbs and push/pull up to 100 lbs., • Ability to bend, twist, turn, kneel, and squat., • Stand and walk for the duration of assigned shift and reach overhead continuously., • Use air/power/vibrating tools and do strong, pincher gripping., • Work safely around moving equipment, power tools, and industrial vehicles., • Repetitive use of upper extremities. It may be necessary to perform any of these functions up to twelve hours a day. Skills & Knowledge • Basic knowledge of computers., • Basic knowledge of power, air, torque, and manual tools., • Understanding of Mechanical and Assembly concepts., • Prior manufacturing assembly experience preferred. EEO Statement Waev Inc is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law.

Job DescriptionDescription: Join a Team That Works Hard & Has Fun Doing It At Cristek, we build mission-critical cable assemblies and connectors used in aerospace and defense applications. We’re looking for reliable, hardworking team players who take pride in quality work and enjoy being part of a fast-paced team environment. Our culture is built around our ACE values: • Accountability – Own your work and deliver results, • Collaboration – Support your team and communicate openly, • Excellence – Take pride in getting the job done right If you like staying busy, learning new skills, and working with a team that knows how to work hard and have fun, we want to meet you. What You’ll Do • Assemble cable and wire harness products, • Read basic drawings and work instructions, • Use hand tools, crimpers, soldering irons, and measuring tools, • Perform inspections and continuity checks, • Work with production and engineering teams to meet quality and delivery goals What We’re Looking For • High School Diploma or equivalent, • 3–5 years of cable/harness assembly experience preferred, • Strong soldering, crimping, and assembly skills, • Attention to detail and quality, • Ability to work under a microscope, • Team player with a strong work ethic Requirements: Required Skills & Working Conditions • Must be able to pass Manual Dexterity requirements (handling small parts effectively, demonstrate fine motor skills and dexterity to manipulate tweezers, small pliers and parts with speed and precision), • Must possess sufficient hand and upper body strength and gross motor skills to route cable bundles of various sizes and weights, • Must be able to demonstrate Technical Literacy (ability to read and accurately interpret wiring diagrams, electrical schematics, BOM’s and blueprints or demonstrate the ability to learn this process), • Must follow strong safety standards, • Must possess attention to detail, • Must be able to work as part of a team, • Fluent in reading, writing and speaking/understanding English, • Must be able to pass Visual Acuity requirements (color, depth perception and field of vision), • This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee Physical Requirements • Required to stand/or sit for long periods of time. Performs limited intermittent physical exertion. Required to lift up to 10 pounds frequently and up to 30 pounds occasionally. Works under safe conditions with some occasional exposure to noise or heat. Performs general housekeeping duties daily in Cable Assembly area Why Cristek? • Competitive Pay, • Shift Differential for 2nd Shift, • Overtime Opportunities, • Medical, Dental & Vision Benefits, • PTO & Paid Holidays, • 401(k) Match, • Tuition Reimbursement Work hard. Get stuff done. Have fun. Build something that matters. · Qnnect and its affiliated companies are affirmative action/equal opportunity employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information.?Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description For over fifty years, Custom Power has been a leader in the design and manufacturing of specialized battery packs and advanced battery management systems. Serving key industries such as medical, aerospace, defense, and industrial, we deliver high-quality, innovative solutions to our clients. As an ISO 9001, AS9100, and ITAR-registered company, Custom Power maintains the highest standards of quality and precision in everything we do. We are currently seeking a dedicated and detail-oriented Production Assembler to join our team. This position plays a critical role in assembling battery packs and battery management systems according to precise specifications and quality standards. The successful candidate will work hands-on with various components and tools, following assembly instructions, blueprints, and technical documents. Attention to detail, adherence to safety protocols, and commitment to quality are essential in this role. From your first day with Custom Power, your success will be our top priority. You will receive support and guidance from your team, ensuring you have the resources you need to thrive. This role will offer hands-on experience in logistics, providing opportunities to grow within our dynamic organization. ESSENTIAL DUTIES AND RESPONSIBILITIES include but are not limited to the following. Other duties may be assigned as needed. • Assembly of Products: Assemble battery packs and battery management systems by following blueprints, work instructions, and assembly guides to ensure accurate and consistent production., • Component Handling: Handle and position small components, wires, and connectors with precision and care to prevent damage and ensure proper alignment., • Use of Tools & Equipment: Operate hand tools, power tools, and specialized equipment to complete assembly tasks efficiently and safely., • Quality Control: Conduct inspections of in-process and completed assemblies to ensure compliance with quality standards., • Soldering & Wiring: Perform basic soldering and wire routing as required for assembly., • Documentation: Record assembly data, complete production checklists, and maintain accurate documentation of work performed., • Adherence to Safety Protocols: Follow all safety procedures and wear appropriate personal protective equipment (PPE) to maintain a safe working environment., • Inventory Management: Notify supervisors of low stock or the need for replenishment of components, ensuring production timelines are met., • Problem Solving: Identify issues with parts, materials, or processes and communicate with supervisors to resolve them promptly., • Equipment Maintenance: Conduct basic cleaning and maintenance of assembly tools and equipment to ensure functionality and longevity., • Cross-Department Collaboration: Work closely with Quality Control, Engineering, and Production Supervisors to address any production challenges and maintain workflow., • Continuous Improvement: Participate in continuous improvement initiatives to enhance production efficiency, reduce waste, and maintain high-quality standards. QUALIFICATIONS • High school diploma or equivalent, • 1+ years of experience in production assembly, electronics assembly, or manufacturing, • Ability to read and interpret blueprints, technical drawings, and assembly instructions, • Proficiency in using hand tools, power tools, and specialized assembly equipment, • Strong attention to detail and ability to follow precise instructions, • Basic soldering experience is preferred but not required, • Ability to perform repetitive tasks with precision and maintain focus for extended periods, • Effective communication skills, both written and verbal., • Must be able to work effectively in a fast-paced, team-oriented environment., • Ability to stand, bend, and work with small components for extended periods, • Must be able to lift up to 25 lbs. as needed, • Proficiency in basic computer applications, • Ability to work Monday through Friday with occasional overtime as needed. Custom Power is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description For over fifty years, Custom Power has been a leader in the design and manufacturing of specialized battery packs and advanced battery management systems. Serving key industries such as medical, aerospace, defense, and industrial, we deliver high-quality, innovative solutions to our clients. As an ISO 9001, AS9100, and ITAR-registered company, Custom Power maintains the highest standards of quality and precision in everything we do. We are currently seeking a dedicated and detail-oriented Production Assembler to join our team. This position plays a critical role in assembling battery packs and battery management systems according to precise specifications and quality standards. The successful candidate will work hands-on with various components and tools, following assembly instructions, blueprints, and technical documents. Attention to detail, adherence to safety protocols, and commitment to quality are essential in this role. From your first day with Custom Power, your success will be our top priority. You will receive support and guidance from your team, ensuring you have the resources you need to thrive. This role will offer hands-on experience in logistics, providing opportunities to grow within our dynamic organization. ESSENTIAL DUTIES AND RESPONSIBILITIES include but are not limited to the following. Other duties may be assigned as needed. • Assembly of Products: Assemble battery packs and battery management systems by following blueprints, work instructions, and assembly guides to ensure accurate and consistent production., • Component Handling: Handle and position small components, wires, and connectors with precision and care to prevent damage and ensure proper alignment., • Use of Tools & Equipment: Operate hand tools, power tools, and specialized equipment to complete assembly tasks efficiently and safely., • Quality Control: Conduct inspections of in-process and completed assemblies to ensure compliance with quality standards., • Soldering & Wiring: Perform basic soldering and wire routing as required for assembly., • Documentation: Record assembly data, complete production checklists, and maintain accurate documentation of work performed., • Adherence to Safety Protocols: Follow all safety procedures and wear appropriate personal protective equipment (PPE) to maintain a safe working environment., • Inventory Management: Notify supervisors of low stock or the need for replenishment of components, ensuring production timelines are met., • Problem Solving: Identify issues with parts, materials, or processes and communicate with supervisors to resolve them promptly., • Equipment Maintenance: Conduct basic cleaning and maintenance of assembly tools and equipment to ensure functionality and longevity., • Cross-Department Collaboration: Work closely with Quality Control, Engineering, and Production Supervisors to address any production challenges and maintain workflow., • Continuous Improvement: Participate in continuous improvement initiatives to enhance production efficiency, reduce waste, and maintain high-quality standards. QUALIFICATIONS • High school diploma or equivalent, • 1+ years of experience in production assembly, electronics assembly, or manufacturing, • Ability to read and interpret blueprints, technical drawings, and assembly instructions, • Proficiency in using hand tools, power tools, and specialized assembly equipment, • Strong attention to detail and ability to follow precise instructions, • Basic soldering experience is preferred but not required, • Ability to perform repetitive tasks with precision and maintain focus for extended periods, • Effective communication skills, both written and verbal., • Must be able to work effectively in a fast-paced, team-oriented environment., • Ability to stand, bend, and work with small components for extended periods, • Must be able to lift up to 25 lbs. as needed, • Proficiency in basic computer applications, • Ability to work Monday through Friday with occasional overtime as needed. Custom Power is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job DescriptionDescription: About Us Advanced Cooling Technologies, Inc. (ACT) is a leading provider of thermal management solutions for aerospace, defense, data centers, energy, and industrial applications. For more than 20 years, ACT has engineered and manufactured innovative technologies that solve complex thermal challenges in demanding environments. Our team is driven by continuous innovation, teamwork, and collaboration, delivering reliable solutions that support critical missions and next-generation technologies worldwide. Job Summary The Composite Layup Technician is responsible for fabricating composite parts through accurate placement, orientation, and bonding of materials into molds or tooling in accordance with engineering drawings, ply books, work instructions, and quality requirements. This role focuses on the pre-cure manufacturing phase of composite components. Essential Duties and Responsibilities • Perform hand layup of composite materials, including prepregs, fabrics, adhesives, and films, • Cut, kit, and stage materials per job requirements, • Follow ply books, travelers, engineering drawings, and work instructions, • Ensure proper fiber orientation, ply sequence, material placement, and part configuration, • Apply resins, adhesives, and bonding films as required, • Perform vacuum bagging, debulking, and preparation for curing processes, • Maintain material handling controls, including freezer life, out-time tracking, and cleanliness requirements, • Inspect work for conformity to specifications prior to cure, • Complete required manufacturing and quality documentation, • Adhere to safety, environmental, and quality system requirements, • Support rework and continuous improvement activitiesRequirements:, • Ability to read and interpret engineering drawings, ply books, and work instructions, • Strong attention to detail and manual dexterity, • Understanding of composite materials, fiber orientation, and lamination techniques preferred, • Ability to work in controlled environments, including PPE requirements, • Basic math and measurement skills, • High school diploma or equivalent required, • Prior experience in composite layup, aerospace manufacturing, or related field preferred, • On-the-job training may be provided for entry-level candidates, • Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee or asylee.) ACT offers competitive pay, excellent benefits (medical, dental, vision, paid time off, holidays, company-paid life & disability insurance, 401(k) match, and profit-sharing), and a supportive team environment. ACT is an Equal Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other protected characteristic. ACT participates in E-Verify. California Applicants: ACT collects personal information for hiring purposes. California residents may have rights under the CCPA/CPRA. Contact HR at barbara.rockwell@1-act.com.

Job DescriptionRBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Please copy and paste the following link to apply to our corporate career page: https://recruiting.ultipro.com/ROL1001RBCAI/JobBoard/323503a8-be53-4e45-a425-31ab5d011434/Opportunity/OpportunityDetail?opportunityId=99fa6261-1664-4f0b-be84-44b152f95bc1 Essential Functions of the Job: • Operate marking equipment including electro-etching units, laser engravers, dot peening units, and ink stampers to label parts accurately., • Inspect parts for correct identification and quality standards before and after marking., • Perform wrapping, boxing, and labeling of parts according to packaging specifications and customer requirements., • Maintain cleanliness and organization of workstations and equipment., • Follow safety protocols and production procedures to ensure a safe and efficient work environment., • Record job completion details and report any defects or equipment issues to supervisors. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: • High school diploma or General Education Degree (GED) required. Experience: • 1-3 months related experience and/or training; or equivalent combination of education and experience. Knowledge/Skills/Abilities: • Proficiency in operating marking equipment and tools., • Strong attention to detail for accurate labeling and defect detection., • Effective manual dexterity for wrapping and boxing parts efficiently., • Basic computer skills for logging work or referencing job instructions., • Good time management to meet production deadlines., • Ability to follow written and verbal instructions precisely., • Capability to lift and handle parts of varying sizes and weights up to 25lbs., • Ability to work independently or as part of a team., • Capacity to maintain focus during repetitive tasks., • Willingness to adapt to changing production needs. Physical & Environmental Factors:Physical Requirements: Standing for extended periods, repetitive hand and arm movements, lifting and carrying up to 25lbs, and manual dexterity for handling small components and operating marking equipment. Environmental Conditions: Exposure to industrial noise, working around marking chemicals (e.g., ink, etching solutions) with proper PPE, and temperature variations. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee’s pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $17.00 to $19.00/hour. Please apply directly at: https://recruiting.ultipro.com/ROL1001RBCAI/JobBoard/323503a8-be53-4e45-a425-31ab5d011434/OpportunityDetail?opportunityId=99fa6261-1664-4f0b-be84-44b152f95bc1 RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #42.1-1

Job Description Join a team where your impact reaches beyond the stars! At Terran Orbital, you're not just part of the system – you're a vital force propelling our mission forward. As trailblazers in satellite manufacturing and aerospace innovation, we shatter boundaries daily to deliver groundbreaking solutions that power our nation's defense and commercial missions. We are a unique, fast growing, and trusted team dedicated to swiftly and efficiently designing, building, launching, and operating state of the art satellites for advanced mission constellations. If you're driven by purpose, inspired by challenges, and ready to leave your mark on the universe, you'll find a home and endless opportunities for growth here. Together, let's redefine what is possible in orbit and beyond! Terran Orbital is seeking an experienced AIT Technician – GNC Module Assembly to join our dynamic team. Reporting to the Production Manager the AIT Technician – GNC Module Assembly will responsible for assembling and testing Guidance, Navigation & Control (GNC) spacecraft components. The ideal candidate should possess a keen understanding of quality control and AS-9100 standards. This role is on our Weekday shift (Monday - Thursday) from 6:00AM - 4:30PM. Key Duties and Responsibilities • Follow detailed procedures to assemble complex electronic and mechanical modules., • Operate hand tools such as screwdrivers, torque wrenches, and light power tools., • Ability to quickly change priority while working in a fast-paced environment., • Communicate statuses, issues, and suggestions effectively to the support engineering team., • Updating documentation and hardware statuses through online services., • Basic avionics and the electrical troubleshooting., • Assist in spacecraft integration related activities., • Must possess a strong work ethic, be able to work with limited supervision, and meet the requirements of the attendance policy., • Must perform all functions of the job in a safe and professional manner., • Must keep work area(s) in a neat, clean, safe, and orderly condition., • Ability to stand for most of the working day., • Perform miscellaneous lab duties, including kitting, inventory, and organization tasks., • Perform other tasks/responsibilities as assigned Qualifications and Skills • High school diploma or GED, • 2+ years of professional experience working hands-on as a technician within electromechanical assembly and spacecraft/spacecraft hardware manufacturing, • Ability to read, understand and follow detailed work instructions for assembly and testing flight product including blueprints and schematic drawings, • Proficiency with Windows 10, Microsoft Office products, and internet browser applications, • Good written and verbal communication skills, • Knowledge of soldering tools and practices (J-STD-001 certification preferred but not required), • Skillset of harnessing and soldering to IPC 620 specifications preferred, • Ability to maintain a clean and organized workspace, • Familiarity with cleanroom cleanliness standards and ESD precautions, • Must have excellent visual acuity to perform detailed inspections and quality control tasks, • Ability to accurately distinguish a wide range of colors, which is essential for success in this role, • U.S. Citizenship with ability to obtain and maintain DoD security clearance Your actual level and base salary will be determined case-by-case and may vary based on the job-related qualification, knowledge, skills, education, and experience. In addition to base salary, we offer 100% covered medical, dental, and vision coverage, a 401(k) match, Flexible Time Off (FTO), covered life insurance, maternity and paternity leave, tuition reimbursement, employee referrals, and lots of swag! Salary Range $28—$37 USD Full-time positions only: Benefits • 100% Company-paid comprehensive medical, dental, and vision coverage for you and your dependents, • 401(k) Match, • Flexible Time Off (FTO), • Education Reimbursement, • Competitive Paid Parental Leave About Terran Orbital Terran Orbital is a leading manufacturer of satellite products primarily serving the aerospace and defense industries. Terran Orbital provides end-to-end satellite solutions by combining satellite design, production, launch planning, mission operations, and on-orbit support to meet the needs of the most demanding military, civil, and commercial customers. Learn more at www.terranorbital.com Physical Demands An employee must meet the physical demands described to perform the essential functions of this job successfully. In performing the duties of this job, the employee is routinely required to sit or stand for long durations of time, in addition to bending, reaching, and walking. This would require the ability to lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. This position is generally sedentary, with substantial computer usage. Work Environment The job operates in a professional office environment but in a manufacturing company. This job routinely uses standard office equipment such as computers, phones, photocopiers, and scanners. Disclaimers To comply with U.S. Government space technology export regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. In addition, please note that this position may require a current United States National Security clearance or eligibility for such a clearance. Terran Orbital is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, or membership in any other group protected by federal, state, or local law. If you need assistance or accommodation due to a disability, you may contact us at hr@terranorbital.com. Terran Orbital does not accept unsolicited resumes from recruiters, employment agencies, or staffing firms. To conduct business with Terran Orbital, a Master Services Agreement (MSA) must be executed and confirmed prior to submitting any information relating to a potential candidate. Without a signed MSA, Terran Orbital shall not be responsible to any individual or entity for any payment relating to any form of fee or compensation. And, in the event that a resume or candidate is submitted by a recruiter, an employment agency, or a staffing firm without a fully executed MSA, Terran Orbital has the unrestricted right to pursue and hire any of those candidate(s) without any legal or financial responsibility to the recruiter, agency, and/or firm.

Job Description RBC Bearings Incorporated (NYSE: RBC) is a leading international manufacturer of highly engineered precision bearings and components for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and engineered components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 60 facilities, of which 43 are manufacturing facilities in ten countries and our market capitalization is approximately $14.5 billion. JOB TITLE/LOCATION: Assembler - Mark & Pack – Santa Ana, CA Essential Functions of the Job: • Operate marking equipment including electro-etching units, laser engravers, dot peening units, and ink stampers to label parts accurately., • Inspect parts for correct identification and quality standards after and after marking., • Perform wrapping, boxing, and labeling of parts according to packaging specifications and customer requirements., • Maintain cleanliness and organization of workstations and equipment., • Follow safety protocols and production procedures to ensure a safe and efficient work environment., • Record job completion details and report any defects or equipment issues to supervisors. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: • High school diploma or General Education Degree (GED) required. Experience: 1-3 months related experience and/or training; or equivalent combination of education and experience. Knowledge/Skills/Abilities: • Proficiency in operating marking equipment and tools, • Strong attention to detail for accurate labeling and defect detection, • Effective manual dexterity for wrapping and boxing parts efficiently, • Basic computer skills for logging work or referencing job instructions, • Good time management to meet production deadlines, • Ability to follow written and verbal instructions precisely, • Capability to lift and handle parts of varying sizes and weights up to 25lbs, • Ability to work independently or as part of a team, • Capacity to maintain focus during repetitive tasks, • Willingness to adapt to changing production needs Physical & Environmental Factors: Physical Requirements: Standing for extended periods, repetitive hand and arm movements, lifting and carrying up to 25lbs, and manual dexterity for handling small components and operating marking equipment. Environmental Conditions: Exposure to industrial noise, working around marking chemicals (e.g., ink, etching solutions) with proper PPE, and temperature variations. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee’s pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $18.00 to $22.00/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #42.1-1

Job DescriptionSpecific duties include: • Assembling parts, including ball loading, greasing, sealing, packaging, and boxing., • Operating lathes to deburr parts and achieve final finishes., • Washing components using Branson and Heptane cleaning systems., • Inspecting parts using various inspection equipment such as 0-1 micrometers, electronic drop gauges, and other handheld measuring tools., • Working 8 to 12-hour shifts in a high-paced environment. Qualifications: • Ability to use hands for polishing parts and assembly fixtures., • Competence in using handheld measuring equipment, including 0-1 micrometers and electronic drop gauges., • Capability to read and interpret blueprints., • Proficiency with standard hand tools, surface plates, open setups, comparators, and fixed gauging., • Strong teamwork skills and the ability to work independently in a dynamic environment., • Ability to perform multiple tasks under deadlines., • Physical ability to sit, stand for long periods, and lift at least 25 pounds., • Must pass a vision test., • Ability to follow instructions accurately. Physical and Mental Requirements: • Able to lift 25 pounds regularly., • Ability to sit or stand for extended periods., • Must be adaptable to a constantly changing environment and perform well under deadlines. Experience and Education: • Previous experience in a similar role is preferred but not required., • Must demonstrate the ability to learn and apply new skills effectively. We are looking for motivated individuals who can contribute to our team-oriented environment and handle the demands of a high-paced production setting. Please note that this job description is not exhaustive. Management reserves the right to add, modify, change, or rescind work assignments or different positions and to make reasonable adjustments to ensure qualified employees can perform the essential functions of the job. Hourly Rate of Pay: $16.50/ hour to $20.00/ hour Please note: The salary range information is only applicable to California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Equal Opportunity Employer:Western Precision Aero, LLC. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Assembler Operations | Anaheim, CA | Full-Time About Korrus Korrus is transforming the way people interact with light. We are the leader in human-centric lighting, built on more than 500 patents in spectral and circadian technology, and pioneers in Human Light Interaction, the next frontier in human health and wellness. That work runs on three fronts: • Ecosense. A globally known and respected leader in architectural and commercial lighting, and the business now bringing circadian technology into the spaces where people work, heal, learn, and gather., • OIO. Our consumer brand, bringing circadian lighting into the home: biologically aligned light, the right spectrum at the right time of day, to support how people wake, focus, and rest., • Everything else in Human Light Interaction. We are pushing the limits of what light can do for human health and performance, and we own the intellectual property to do it. The Role The Assembler is responsible for assembling lighting products and components according to established work instructions, quality standards, and production schedules. This position plays a critical role in supporting manufacturing operations by producing high-quality products safely, accurately, and efficiently. Essential Duties and Responsibilities · Assemble components, subassemblies, and finished products according to work instructions, engineering drawings, and visual aids. · Use hand tools, power tools, fixtures, and other assembly equipment safely and effectively. · Inspect completed assemblies to ensure products meet quality standards and specifications. · Identify, report, and help resolve defective materials, equipment issues, or assembly discrepancies. · Perform basic testing or verification procedures as required. · Maintain accurate production records and complete required documentation. · Keep workstations clean, organized, and compliant with 5S and safety standards. · Meet daily production goals while maintaining a high level of quality and attention to detail. · Follow all company safety policies, quality procedures, and standard operating procedures. · Work collaboratively with supervisors, engineers, quality personnel, and fellow production team members. · Assist with other manufacturing or warehouse duties as assigned. Requirements · High school diploma or GED preferred. · Previous manufacturing or assembly experience preferred but not required. · Ability to read and follow written work instructions and diagrams. · Strong attention to detail and commitment to producing quality work. · Good hand-eye coordination and manual dexterity. · Ability to work independently as well as part of a team. · Dependable attendance and punctuality. Physical Requirements · Ability to stand, walk, bend, reach, and perform repetitive motions throughout the workday. · Ability to regularly lift and carry up to 35 pounds and occasionally up to 50 pounds with or without reasonable accommodation. · Ability to use hands and fingers for repetitive assembly tasks requiring fine motor skills. · Ability to distinguish colors and small components when assembling products. Work Environment · Manufacturing and production floor environment. · Regular exposure to mechanical equipment, hand tools, and production machinery. · Personal Protective Equipment (PPE) may be required depending on the work area. · Overtime and occasional weekend work may be required to meet production demands. Compensation We offer competitive hourly compensation based on experience, skills, and qualifications. Korrus is an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic. This position is not eligible for current or future visa sponsorship.

Job Description Attalon is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. The Assembler III is an essential part of our manufacturing team, helping bring complex, high‑precision products to life. In this role, you’ll assemble detailed components and products that meet strict quality and performance standards. You’ll work closely with our engineering and quality teams, collaborating to resolve assembly challenges and support ongoing improvements across the production process. This position is ideal for someone who enjoys hands-on work, takes pride in accuracy, and is comfortable interpreting technical drawings and using specialized tools. You’ll play an important part in ensuring our products are reliable, built to specification, and ready for their next stage of production or shipment. Minimum Qualifications: • High school diploma or equivalent., • Minimum of 3 years of experience in a manufacturing assembly role., • Proficiency in reading and interpreting technical drawings and assembly instructions., • Ability to use hand and power tools safely and effectively. Strong attention to detail and commitment to quality standards. Preferred Qualifications: • Certification in manufacturing or assembly processes (e.g., IPC certification)., • Basic knowledge of lean manufacturing principles., • Previous experience working in a regulated manufacturing environment (e.g., ISO standards)., • Ability to perform minor equipment maintenance and troubleshooting. Responsibilities: • Assemble components and subassemblies using hand tools, power tools, and automated equipment following detailed work instructions and blueprints., • Inspect parts and assemblies for defects or deviations from specifications, documenting and reporting any quality issues promptly., • Collaborate with engineering and quality teams to troubleshoot assembly problems and implement corrective actions., • Maintain accurate records of assembly activities, including time, materials used, and any deviations from standard procedures., • Adhere to all safety protocols and maintain a clean, organized workspace to promote efficiency and prevent accidents. Skills: • The required skills enable the Assembler III to accurately interpret complex technical drawings and follow precise assembly instructions, ensuring product quality and consistency., • Proficiency with hand and power tools is essential for efficient and safe assembly operations., • Strong problem-solving skills are used daily to identify and resolve assembly issues in collaboration with cross-functional teams. Preferred skills such as familiarity with automated equipment and lean manufacturing principles enhance productivity and support continuous improvement initiatives., • Effective communication and record-keeping skills ensure clear documentation and adherence to safety and quality protocols throughout the manufacturing process. For California, the salary range for this position is: $27.90 - $37.61 per hour Please note this range is provided as a general guideline. When determining an offer, Attalon takes into account multiple factors, including (but not limited to) the responsibilities of the position, your professional experience, education and training, specialized skills, and current market and business conditions. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job DescriptionRBC Bearings Incorporated (NYSE: RBC) is a leading international manufacturer of highly engineered precision bearings and components for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and engineered components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 60 facilities, of which 43 are manufacturing facilities in ten countries and our market capitalization is approximately $14.5 billion. Please Use the Link Below to Apply for This Position Directly Through Our Corporate Website: https://recruiting.ultipro.com/ROL1001RBCAI/JobBoard/323503a8-be53-4e45-a425-31ab5d011434/Opportunity/OpportunityDetail?opportunityId=fc1103a3-e1c7-4cfa-99e4-b2f17ebdd019 Job Title/Location: Assembler - Bond Room – Santa Ana, CA Essential Functions of the Job: • Applies adhesive, installs liner, and trims product., • Masks surfaces to prepare items for bonding., • Must have the ability to use basic hand tools, for example, knives, tweezers, swabs, plug gages and micrometers., • Must be able to work around various machines such as coating tables, ovens, and presses., • Must be able to manage time effectively and work on various tasks at once. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: • High School diploma or General Education Degree (GED) required. Experience: • 0-3 years related experience., • Experience working with resins and chemicals is a plus., • Experience as an assembler is a plus. Knowledge/Skills/Abilities: • Must be a quick learner., • Strong attention to detail., • Ability to follow written and oral instructions. Physical and Environmental Elements: While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. Also, the employee is regularly required to sit and talk or to hear. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident ["green card" holders] or have refugee or asylee status. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $18.00 to $20.00/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #34.1-1

Job Description Electrical Assembler II – Power Equipment Full‑Time • Non‑Exempt • Onsite (Fullerton, CA) We are seeking a skilled and detail‑oriented Electrical Assembler II to support the assembly, integration, and customization of MQ power generators. In this mid‑level role, you'll work hands‑on with complex electrical systems—including DCA product modifications and custom configurations—ensuring every generator meets exacting quality, safety, and performance standards. If you enjoy working from schematics, take pride in high‑quality workmanship, and thrive in a fast‑paced manufacturing environment, this role offers the opportunity to make a direct impact on reliable, field‑ready power solutions. What You'll DoElectrical Assembly & Integration • Assemble, route, and install electrical wiring and components on generator systems, including reconnection boards, terminal blocks, control panels, bus panels, engine DC systems, generator AC systems, and junction boxes., • Cut, strip, and terminate wires and cables to specified lengths; crimp terminals and lugs using hand or automated tools., • Manufacture, modify, and install custom wiring harnesses to meet product and customer specifications., • Install and connect electrical components such as relays, CTs, controllers, circuit breakers, cam‑locks, switches, solenoids, and plugs., • Route, secure, and organize wiring using proper techniques (combing, tying, wrapping) to ensure safety, durability, and professional appearance.Documentation & Technical Interpretation, • Read and interpret work orders, wiring diagrams, schematics, and specifications to determine proper assembly methods and ensure compliance with standards., • Follow detailed work instructions to complete assemblies accurately and efficiently.Testing & Troubleshooting, • Perform functional, continuity, and load‑bank testing using electrical test equipment such as ohmmeters and test lights., • Diagnose and troubleshoot electrical issues, identify root causes, and complete repairs as needed., • Verify completed assemblies meet quality standards and are free of defects prior to release.Collaboration & Safety, • Coordinate with team members and cross‑functional partners to meet production goals and delivery deadlines., • Maintain tools, equipment, and work areas in a clean, safe, and organized condition., • Follow all safety procedures and participate in training sessions and team meetings., • Perform other duties as assigned in support of manufacturing operations.What You BringExperience & Education, • High school diploma or equivalent required; technical or electrical certification from a vocational program preferred., • Minimum of 3 years of electrical assembly experience, preferably in generator or industrial equipment manufacturing, or an equivalent combination of education and experience.Technical Skills, • Strong ability to read and interpret electrical schematics, wiring diagrams, and work instructions., • Proficiency with hand and power tools, as well as electrical testing equipment., • Hands‑on experience with wiring, harness fabrication, and electrical troubleshooting., • Ability to operate material‑handling equipment such as forklifts and cranes (or willingness to become certified).Work Style & Attributes, • Strong attention to detail with a commitment to accuracy and quality workmanship., • Ability to manage time effectively and work under pressure to meet production deadlines., • Willingness to work overtime, including weekends, as business needs require., • Positive attitude, teamwork mindset, and strong communication skills.Physical Requirements The physical demands described here are representative of those required to successfully perform the essential functions of this role. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. • Occasional lifting of 25–50 pounds; carrying, pushing, and pulling materials., • Ability to climb, balance, stoop, kneel, crouch, and crawl as needed., • Ability to work in confined spaces and perform tasks requiring bending, reaching, twisting, and prolonged standing., • Typical work distribution includes approximately 20% sitting, 35% walking, and 45% standing. Compensation & Benefits • $24.00/hr-$28.00/hr, • 7:00am-3:30pm M-F, • 11 paid Holidays, • Generous Paid Time Off — accrue up to 4 weeks per year, • Excellent Benefits Package starting the 1st of the month after 30 days of employment, including:, • Medical, Dental & Vision (including orthodontics), • Company‑paid Life, AD&D, Short‑Term & Long‑Term Disability, • Flex Spending Account (FSA), accident plans, and supplemental options, • 401(k) Retirement Plan, • Tuition Reimbursement up to $5,250 annually, • MetLife Hyatt Legal plans, • Employee Assistance Program Multiquip provides competitive pay and benefits and supports our employees through our values of safety, integrity and respect. Employment is subject to pre-employment physical, drug-screening and background investigation. E-Verify (www.dhs.gov/E-Verify) is used to verify a candidates' legal right to work in the U.S. Multiquip Inc. is proud to be an Equal Opportunity Employer. All qualified applicants will received consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other protected class. Data Privacy and Collection Notice (multiquip.com) https://www.multiquip.com/multiquip/data-privacy-and-collection-notice.htm

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.\n \n ABOUT THE JOB\n \n \nAs the Supplier Quality Control Supervisor, you will lead, mentor, and scale a high-performing team of quality control inspectors responsible for both internal receiving and external source inspection operations. You will serve as a frontline technical and operational leader bridging our internal manufacturing needs with our external supply base-ensuring parts meet rigorous mission-critical standards before they ever leave a supplier's dock.\n \n \nYour focus will be on the tactical execution of inspection processes, workforce management, supplier containment, and the application of rigorous quality standards, including Geometric Dimensioning and Tolerancing (GD&T), calibrated measurement tools, data systems, and Advanced Product Quality Planning (APQP). If you are passionate about developing people, holding suppliers accountable, and driving operational excellence from the vendor floor to final assembly, this position is for you.\n \n WHAT YOU'LL DO\n \n\n • Directly lead, mentor, and scale a team of Quality Inspectors across multiple shifts and sites; conduct regular 1-on-1s, skill-gap assessments, and performance appraisals.\n, • Manage workforce planning and scheduling to optimize inspection throughput, clear receiving backlogs, and meet aggressive production milestones.\n, • Oversee and execute Source Inspections at supplier facilities, validating product conformance against engineering drawings, technical specifications, purchase orders, and AS9102 First Article Inspections (FAIs) prior to shipment.\n, • Establish and govern a Delegated Inspection program, qualifying and auditing trusted suppliers to perform self-release to accelerate dock-to-stock timelines.\n, • Lead rapid on-site containment and material sorting at vendor facilities during critical quality escapes, supplier non-conformances (NCRs), and Supplier Corrective Action Requests (SCARs).\n, • Train and elevate team technical competencies in blueprint reading, GD&T, CMM/metrology equipment, calibrated measurement tools, and electronics assembly standards.\n, • Cultivate a culture of high accountability, empowering inspectors to issue stop-work or containment notices whenever safety, compliance, or quality standards are compromised.\n, • Resolve tactical ambiguities in inspection methods, inspection orders, and operational planning, giving inspectors clear direction on daily execution.\n, • Manage incoming inspection operations, including Receiving Material Inspection, In-process inspection, End-of-line Inspection, and ad-hoc containment audits.\n, • Partner with Supplier Quality Engineering (SQE) and Procurement to conduct on-site supplier process evaluations, risk assessments, and production readiness reviews.\n, • Author, standardize, and maintain Standard Operating Procedures (SOPs), quality control plans, and inspection checklists.\n, • Collect and statistically analyze data to identify supplier failure trends, lower defect rates, and eliminate recurring non-conformances.\n, • Ensure full compliance and audit-readiness with AS9100 requirements and customer standards.\n\n \n REQUIRED QUALIFICATIONS\n \n\n • 5+ years of progressive Quality and/or Regulatory experience within the Aerospace, Defense, or Automotive industries.\n, • 3+ years of direct people management experience, with a proven track record of hiring, coaching, and managing the day-to-day performance of quality technicians or inspectors.\n, • Demonstrated hands-on experience performing on-site Source Inspections and verifying AS9102 First Article Inspections (FAIs) at supplier facilities.\n, • Strong working knowledge of Quality Management Systems (AS9100 / ISO 9001) and sampling methodologies (ANSI/ASQ Z1.4).\n, • Hands-on exposure to the inspection of mechanical assemblies and electronic components (PCBs, wire harnesses, power supplies) for high-reliability aerospace applications.\n, • Advanced proficiency in blueprint reading, GD&T (ASME Y14.5), standard metrology hand tools, and calibrated measurement equipment.\n, • Proven leadership and decision-making capabilities in a fast-paced production and hardware environment.\n, • Strong written, verbal, and cross-functional communication skills.\n, • Must be able to travel up to 50% to local manufacturing sites and HQ in Orange County, CA, and up to 20% to out-of-state supplier facilities and other company sites.\n, • U.S. Person status is required as this position needs to access export controlled data.\n\n \n PREFERRED QUALIFICATIONS\n \n\n • Bachelor's degree in a technical or engineering discipline (Mechanical, Electrical, Manufacturing, or Quality Engineering).\n, • ASQ Certified Quality Inspector (CQI), Quality Engineer (CQE), or Quality Manager (CMQ/OE).\n, • Active or prior IPC-A-610 or IPC/WHMA-A-620 certifications.\n, • Experience standing up, managing, or auditing a Delegated Quality Representative (DQR) / Supplier Self-Release program.\n, • Experience managing field-based, remote, or traveling quality inspection personnel across distributed manufacturing sites or vendor hubs.\n, • Demonstrated experience leading on-site 8D / Root Cause and Corrective Action (RCCA) investigations with vendor executive teams.\n, • Proficiency with manufacturing execution and PLM/ERP tools (e.g., Jira, MES, ERP, Teamcenter, CAD).\n, • Working knowledge of Lean Manufacturing, Six Sigma, and APQP/PPAP frameworks.\n\n TRAVEL\n \n\n • 50% travel required to local manufacturing sites and HQ in Orange County.\n, • 20% travel to other Anduril sites out of state.\n\n \n PHYSICAL DEMANDS AND WORKING CONDITIONS\n \n\n • Ability to lift up to 35 pounds.\n, • Work in clean room environments.\n, • Use of precision optical tools and equipment.\n, • Visual acuity and color discrimination required for inspection.\n, • Adherence to laser safety and contamination control protocols.\n\n \n \nUS Salary Range\n \n \n$86,000-$114,000 USD\n \n \nThe salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: \n \n Benefits\n \n \nAt Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you're supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.\n \n Protecting Yourself from Recruitment Scams\n \n \nAnduril is committed to maintaining the integrity of our Talent acquisition process and the security of our candidates. We've observed a rise in sophisticated phishing and fraudulent schemes where individuals impersonate Anduril representatives, luring job seekers with false interviews or job offers. These scammers often attempt to extract payment or sensitive personal information.\n \n \nTo ensure your safety and help you navigate your job search with confidence, please keep the following critical points in mind:\n \n\n • No Financial Requests: Anduril will never solicit payment or demand personal financial details (such as banking information, credit card numbers, or social security numbers) at any stage of our hiring process. Our legitimate recruitment is entirely free for candidates.\n, • Please always verify communications:\n \n, • Direct from Anduril: If you receive an email from one of our recruiters, it will only come from an @anduril.com address.\n, • Via Agency Partner: If contacted by a recruiting agency for an Anduril role, their email will clearly identify their agency. If you suspect any suspicious activity, please verify the agency's authenticity by reaching out to [email protected].\n \n, • Exercise Caution with Unsolicited Outreach: If you receive any communication that appears suspicious, contains grammatical errors, or makes unusual requests, do not engage. Always confirm the sender's email domain is @anduril.com before providing any personal information or clicking on links.\n, • What to Do If You Suspect Fraud: Should you encounter any questionable or fraudulent outreach claiming to be from Anduril, please report it immediately to [email protected]. Your proactive caution is invaluable in protecting your personal information and upholding the security and trustworthiness of our recruitment efforts.\n\n \n Data Privacy\n \n \nTo view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/. \n \n \nBy submitting your application, you consent to Anduril Industries using a third-party service provider to conduct pre-employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third-party service provider provides risk-intelligence services that may include analysis of sanctions and watchlists, adverse media, public-record information, and other lawful open-source or commercial data sources. This third-party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.

Job Description Job Title: Vinyl Department Assistant Department: Production Reports To: Vinyl Lead Why You’ll Like This Role This is a hands-on production role for someone who enjoys working with their hands, learning a trade, and being part of a team that produces high-quality signage. You’ll gain practical experience in vinyl preparation, layout, and application while working in a supportive, fast-paced environment where quality and teamwork matter. Position Summary The Vinyl Department Assistant supports daily operations within the Vinyl Department by preparing, cutting, weeding, and applying vinyl materials for signage. This role helps maintain quality standards, meet production deadlines, and support overall workflow. Essential Duties and Responsibilities The essential duties include, but are not limited to, the following. • Assist the Vinyl Lead with daily Vinyl Department operations., • Prepare, weed, and apply vinyl materials for signage projects., • Stage vinyl materials and support quality control throughout the production process., • Measure, layout, and prepare vinyl materials for cutting and assembly., • Transfer and cut vinyl using computer-based cutting equipment., • Assemble and prepare color boards as needed., • Organize workload and meet deadlines set by the supervisor., • Maintain a clean, safe, and organized work area., • Follow company policies, procedures, and core values., • Attend all required company and department meetings., • Perform other duties as assigned. Schedule and Work Hours • This position requires flexibility in scheduling based on production needs., • Weekend work and overtime may be required as needed. Qualifications • Minimum 6 months of experience in vinyl, signage, or production work., • Ability to accurately measure and perform layout work., • Basic computer skills; experience with vinyl cutting software a plus., • Strong attention to detail and quality., • Ability to work effectively in a team environment and meet deadlines. Work Environment and Physical Requirements • Production environment with standing, bending, and lifting materials., • Ability to lift up to 35 pounds, with or without reasonable accommodation. Equal Employment Opportunity Statement We are an equal opportunity employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected status.

Job Description RBC Bearings Incorporated (NYSE: RBC) is a leading international manufacturer of highly engineered precision bearings and components for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and engineered components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 60 facilities, of which 43 are manufacturing facilities in ten countries and our market capitalization is approximately $14.5 billion. JOB TITLE/LOCATION: Machine Operator – Santa Ana, CA ESSENTIAL FUNCTIONS OF THE JOB: • For speed lathes, perform trim and deburr using hand tools., • For assembly, install bearings into a housing using dedicated tools and fixtures., • For hone, operate the hone machine to size the inner diameter of the part., • For CNC lathes, perform load/unload operations and check size coming off the machine., • Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations., • Performs prescribed preventative maintenance on machines as required per the P.M. charts., • Must be able to perform but not limited to the following tasks: milling, turning, drilling, taping, de-burring, swaging and all bench operations and inspection., • Must be familiar with the basic machine functions in order to perform the tasks stated above., • Must be willing to accept and receive frequent supervision and assistance with regard to machine set-up. EDUCATION: • High School diploma or General Education Degree (GED) required. EXPERIENCE: • 0-3 years of factory-related experience., • Training in general safety, electrostatic discharge awareness, foreign object damage awareness and quality system awareness. KNOWLEDGE/SKILLS/ABILITIES: • Ability to read and comprehend simple instructions, short correspondence, and memos., • Ability to present information effectively one-on-one., • Ability to apply common sense understanding to carry out instructions in written, oral or diagram form. PHYSICAL AND ENVIRONMENTAL ELEMENTS: • While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas., • The employee is occasionally exposed to moving mechanical parts, fumes or airborne particles and toxic or caustic chemicals., • The noise level in the work environment is usually moderate or loud., • The employee is regularly required to sit and talk or to hear., • The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms., • The employee is occasionally required to stand and walk., • The employee must occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee’s pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $20 to $22/hour RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #27.2-0/2

Job Description Join Our Team as a Materials Expeditor! About the Company: Thomas Global Systems is a leader in the design, manufacture and support of high-integrity aviation and defense electronics, operating out of locations in Sydney, Australia and Irvine, California. About the Role: The Materials Expeditor is a key team member supporting Thomas Global Systems’ operations by driving effective inventory movements, control, and optimization strategies for aircraft parts, components, and materials. This role is responsible for maintaining lab inventory stocked with parts, chemicals, consumables and balancing material availability with cost efficiency. The position focuses on reporting stock levels, managing work-in-process (WIP), and preventing stock shortages for the lab. Working within FAA Part 145, EASA, and AS9100 regulatory frameworks, this role operates in a clean, safe, and organized environment and ensures compliance with all company procedures and quality standards. Location: Irvine, CA, fully onsite. What's on Offer: • A varied, fast paced role with an innovative and respected leader in mission-critical aerospace and defense products., • Competitive remuneration and comprehensive benefit package., • Join a team of skilled and motivated people committed to innovation, collaboration, and national security outcomes. Key Responsibilities: • Inventory Strategy & Optimization: Own and drive inventory availability in the lab for avionics components., • Safety Stock & Planning Policies: Establish and manage safety stock levels within the lab areas, reorder points, and planning parameters to support production continuity and mitigate supply risk. • Obsolescence & Lifecycle Management: Ensure that no expired chemicals or components are in the lab, report upcoming expiration of parts or chemicals to procure new material in a timely manner., • WIP Oversight & Flow Optimization: Monitor and analyse work-in-process (WIP), identify bottlenecks, and suggest actions to improve material flow and reduce aging., • Shortage Prevention & Risk Management: Proactively identify supply constraints and shortages; coordinate cross-functionally to ensure material availability., • Inventory Performance Analysis: Track and report stock outages (chemical expirations, WIP aging, shortages), providing insights and recommendations to improve operational efficiency., • System & Data Integrity: Ensure accuracy of inventory data and planning parameters within ERP/MRP systems; drive improvements in data quality and process consistency., • Regulatory & Quality Leadership: Ensure inventory control processes meet FAA, EASA, and AS9100 requirements; support audits and maintain audit-ready systems and records., • Cross-Functional Leadership: Partner with Procurement, Engineering, Production, and Quality to align inventory strategy with business and operational objectives. Act as backup to stockroom personnel to perform stockroom duties, receiving, and shipping as needed., • Process Improvement: Identify and implement continuous improvement initiatives to enhance inventory control, reduce waste, and improve overall supply chain performance. • Guidance & Support: Provide feedback and support to stockroom and operational staff to ensure effective execution of inventory processes and controls., • Other Duties: Perform additional responsibilities as assigned by management Required Skills, Experience and Behaviors: • Minimum 2 years’ experience in aerospace logistics, inventory control, material handling, or supply chain operations., • Working knowledge of Inventory requirements, AS9100 standards, and aerospace traceability and documentation practices., • Ability to interpret Bills of Materials (BOMs), work orders, and revision-controlled documentation., • Experience using Excel and ERP/MRP systems for inventory transactions, kitting, and material tracking., • Strong attention to detail, organizational skills, and a high level of accuracy in a regulated environment., • Experience in aerospace manufacturing, repair, assembly, avionics, or component logistics preferred. • Supply chain, logistics, or quality-related certifications (e.g., APICS/ASCM) are preferred., • Exposure to lean or continuous improvement practices such as 5S or Kanban is preferred., • Confirmed NEGATIVE results for drug and alcohol testing in compliance with 14 CFR Part 120 and 49 CFR Part 40. Apply now and take your career to new heights! At-Will Employment Statement Thomas Global Systems is an at-will employer. Employment with the company is voluntary and may be terminated by the employee or the company at any time, with or without cause or notice, and for any reason or no reason at all. Equal Employment Opportunity (EEO) Statement Thomas Global Systems is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants and do not discriminate based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, or any other protected status under applicable laws. Americans with Disabilities Act (ADA) Accommodation Statement If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process or to perform the essential functions of a position, please contact us at HumanResources@thomas-global.com.

Job DescriptionRBC Bearings Incorporated (NYSE: RBC) is a leading international manufacturer of highly engineered precision bearings and components for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and engineered components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 60 facilities, of which 43 are manufacturing facilities in ten countries and our market capitalization is approximately $14.5 billion. Please use the link below to apply for this position directly through our corporate website:https://recruiting.ultipro.com/ROL1001RBCAI/JobBoard/323503a8-be53-4e45-a425-31ab5d011434/Opportunity/OpportunityDetail?opportunityId=042f4a00-5fb3-44e3-a773-55047c9be186 JOB TITLE/LOCATION:Machine Operator – Santa Ana, CA. ESSENTIAL FUNCTIONS OF THE JOB: • For speed lathes, perform trim and deburr using hand tools., • For assembly, install bearings into a housing using dedicated tools and fixtures., • For hone, operate the hone machine to size the inner diameter of the part., • For CNC lathes, perform load/unload operations and check size coming off the machine., • Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations., • Performs prescribed preventative maintenance on machines as required per the P.M. charts., • Must be able to perform but not limited to the following tasks: milling, turning, drilling, taping, de-burring, swaging and all bench operations and inspection., • Must be familiar with the basic machine functions in order to perform the tasks stated above., • Must be willing to accept and receive frequent supervision and assistance with regard to machine set-up. EDUCATION: • High School diploma or General Education Degree (GED) required. EXPERIENCE:, • 0-3 years of factory-related experience., • Training in general safety, electrostatic discharge awareness, foreign object damage awareness and quality system awareness. KNOWLEDGE/SKILLS/ABILITIES: • Ability to read and comprehend simple instructions, short correspondence, and memos., • Ability to present information effectively one-on-one., • Ability to apply common sense understanding to carry out instructions in written, oral or diagram form. PHYSICAL AND ENVIRONMENTAL ELEMENTS:, • While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas., • The employee is occasionally exposed to moving mechanical parts, fumes or airborne particles and toxic or caustic chemicals., • The noise level in the work environment is usually moderate or loud., • The employee is regularly required to sit and talk or to hear., • The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms., • The employee is occasionally required to stand and walk., • The employee must occasionally lift and/or move up to 25 pounds., • Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee’s pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $20 to $22/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #27.2-0/2

Job DescriptionDescription: AdvancedPCB is seeking a reliable, motivated Plating Operator to join our growing company. The Plating Operator will be working in a fast-paced, production environment. Knowledge of printed circuit boards is a plus. Essential Job Function: • Operate wet process equipment for PCB panel processing through functions that include manual copper plating, gold immersion, electroless copper, electrolytic gold, outer layer etching, and hot air level processing., • Set and maintain chemical processing equipment within operational parameters., • Carefully load racks in plating tanks while ensuring proper temperature/current of baths., • Load the line., • Work around chemicals and exercise safe chemical handling., • Follow customers’ specifications., • Ability to lift, pull, and push over 20 lbs., • Able to stand for long periods of time., • Maintains and cleans all department equipment., • Screwing in items by hand (Tightening clamps manually)., • Ability to work with hands for extended periods of time., • Position involves working with chemicals in a safe and monitored environment. Work Schedule:This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends, when schedule details provided in advance. Work schedule is 2nd Shift | Monday through Friday, 2:30 pm - 11:00 pm. Requirements: Essential Qualifications: • Qualifications to perform this job successfully, an individual must have a minimum of 3 years of experience in the printed circuit board industry and must be able to perform each duty satisfactorily., • High School diploma or equivalent experience in the PCB Industry., • 3 to 5 years of experience in manufacturing. Preferred Additional Skills: • Good written and verbal communications skills, • Must be able to multitask in a fast-paced environment., • Work closely with production staff and be a great team player. Physical Requirements • Ability to lift, pull, and push over 20 lbs., • Able to stand for long periods of time Compensation:California Hourly Pay Range: $20.00 to $26.00 USD | DOEThe actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. About AdvancedPCBAdvancedPCB, with over 40 years of experience, is a leading manufacturer of high-reliability printed circuit boards. The company features six manufacturing sites: Aurora, Colorado, our headquarters, Santa Clara, two in Southern California, Maple Grove, Minnesota, and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making APCT one of the largest privately held printed circuit board manufacturers in North America. Advanced PCB offers Medical, Dental, Vision Insurance as well as 401K. ITAR Compliance Requirement:This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us!https://www.advancedpcb.com/en-us/

Job DescriptionOverview Company Overview: Allied Universal®, North America’s leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. Job Description As a GSOC Operator, you will serve and safeguard clients in a range of industries such as Commercial Real Estate, Healthcare, Education, Government and more. The Global Security Operations Center (GSOC) Operator, under guidance of GSOC Supervisor, is responsible for assisting company personnel in all concerns that pertain to safety and security for corporate locations around the globe. The individual will work in a GSOC environment, monitoring several screens. The Operator will use a variety of tools that range from access control and alarm monitoring systems to various business intelligence sources, open-source media, Internet, and in-house tools. The Operator is required to detect, analyze, and alert others of any incidents which may impact the client’s people, products, property, or brand image. These may range from extreme weather conditions, political instability, crime, terror, to technical failures. Join the world’s leading global security company! Hiring for a GSOC Operator – Unarmed 4+Years Experience is required/preferred for this role. • Pay-rate is $29.87 per hour. Part Time 24 Hours / Swing Shift 1400-2200 Hour / Friday & Saturday, • Location Irvine, California, • Excellent benefits and career growth opportunities RESPONSIBILITIES: • Provide customer service to our clients by carrying out safety and security procedures, site-specific policies and when appropriate, emergency response activities, • Respond to incidents and critical situations in a calm, problem solving manner, • Investigate alarms and respond by sending security patrol, or alerting Fire services or Police as needed, • Assist company employees in all concerns that pertain to safety and security, • Monitor travel safety and security of company’s employees QUALIFICATIONS: • Be at least 18 years of age for unarmed roles; 21+ years of age for armed roles, • Possess a high school diploma or equivalent, or five (5) years of verifiable experience, • Minimum of two (2) years of military, law enforcement, government, or security experience, • As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws. Allied Universal will consider qualified applications with criminal histories in a manner consistent with applicable laws., • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment. *A valid driver’s license will be required for driving positions only BENEFITS: • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company’s 401 (k) or Supplemental Income Plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal day, • 40 hours of vacation after one year of employment at eligible work assignments. Unused vacation is only paid out where required by law. Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1690523

Job Description The candidate will worked on designated team/assignment. Production activities may vary between working on semi-automated machine line, manual carton packing line, or other production support roles. Most tasks will require the candidate to work in collaboration with multiple teammates. This position is for a first shift operator (Hours: 6:00am to 2:30pm) How You'll Make An Impact: • Performs directed activities in the Raw Material Preparation department to complete the inspection, staging and manufacture of Serum, Urine and Blood based intermediates., • Production activities to include processing of biologicals materials, operating and monitoring equipment under varying conditions; adjusting equipment controls; calculating concentrations, dilutions, and yields; adhering to PPE procedures, aseptic filtering and filing procedures., • Maintains safe and clean work environment by following current good manufacturing practices (cGMP), and standard operating procedures., • Documents production by completing forms, reports, logs, and records of equipment and batches., • Performs basic instrument operation and maintenance, etc.Can assist in the troubleshooting instruments/equipment or reagents related issues and coordinates support operations., • Can assist the routine preventive maintenance on equipment., • Reviews maintenance and/or equipment specific procedures., • Utilizing software applications Microsoft and SAP for completing compliance training and manufacturing. What You Bring: • High school degree or equivalent required., • Entry level experience., • Basic math, writing/reading skills., • Goal oriented team contributor. Location: This position must be based in Irvine, California and requires the employee to be located within commuting distance of the office. Total Rewards Package: At Bio-Rad, we’re empowered by our purpose and recognize that our employees are as well. That’s why we offer a competitive and comprehensive Total Rewards Program that provides value, quality, and inclusivity while satisfying the diverse needs of our evolving workforce. Bio-Rad's robust offerings serve to enrich the overall health, wealth, and wellbeing of our employees and their families through the various stages of an employee’s work and life cycle. Benefits: We’re proud to offer a variety of options, including competitive medical plans for you and your family, free HSA funds, a new fertility offering with stipend, group life and disability, paid parental leave, 401k plus profit sharing, an employee stock purchase program, a new upgraded and streamlined mental health platform, extensive learning and development opportunities, education benefits, student debt relief program, pet insurance, wellness challenges and support, paid time off, Employee Resource Groups (ERG’s), and more! Compensation: The estimated hourly rate for this position is $18.00 to $24.52 at the time of posting. Actual compensation will be provided in writing at the time of offer, if applicable, and is based on several factors we believe fairly and accurately impact compensation, including geographic location, experience, knowledge, skills, abilities, and other job permitted factors. This position is eligible for a variable annual bonus, which is dependent upon achievement of your individual objectives and Company performance. Who We Are: For 70 years, Bio-Rad has focused on advancing the discovery process and transforming the fields of science and healthcare. As one of the top five life science companies, we are a global leader in developing, manufacturing, and marketing a broad range of high-quality research and clinical diagnostic products. We help people everywhere live longer, healthier lives. Bio-Rad offers a unique employee experience with collaborative teams that span the globe. Here, you are supported by leadership to build your career and are empowered to drive change that makes an impact you can see. EEO Statement: Bio-Rad is an Equal Employment Opportunity/Affirmative Action employer, and we welcome candidates of all backgrounds. Veterans, people with physical or mental disabilities, and people of all race, color, sex, sexual orientation, gender identity, religion, national origin and citizenship status are encouraged to apply. Agency Non-Solicitation: Bio-Rad does not accept agency resumes, unless the agency has been authorized by a Bio-Rad Recruiting Representative. Please do not submit resumes unless authorized to do so. Bio-Rad will not pay for any fees related to unsolicited resumes. Fraud Alert: Bio-Rad has received reports of individuals posing as Bio-Rad recruiters to obtain information, including personal and financial, from applicants. Beware of these fake "recruiters" and job scams. Click here for more information on this scam and how to avoid it. #LI-JTS Legal Entity: (USA_1000)Bio-Rad Laboratories, Inc.

Job Description This position is for an Production Operator II on 3rd shift who will work in the Fill/Cap/Label/Freeze Dry department to support manufacturing of Bio-Rad bottled product in compliance with established GMP processes and procedures. This position is for a third-shift operator (Hours: 10PM to 6:30AM starting Sunday evening through Friday Morning). Location: This position must be based in Irvine, California and requires the employee to be located within commuting distance of the office. How You'll Make An Impact: • Supports filling, capping and labeling operations of Bio-Rad bottled Product in team-based manufacturing processes which may require hand filling and/or use of semi-automated machinery., • Performs delivery of Semi-Finished Goods to Warehousing using carts or pallet trucks when applicable., • Performs in-process and final quality inspection of components/product., • Prepares for production by reviewing production schedule; assembling equipment and supplies., • Follow procedures and work instructions to execute production tasks., • Complete required documentation in an accurate and timely manner following Good Documentation Practices (GDP)., • Complete inventory and quality transaction in SAP Inventory System., • Maintains safe and clean work environment by following current good manufacturing practices (cGMP), and standard operating procedures, • Performs basic instrument operation, cleaning and maintenance, etc., • Can assist in the troubleshooting instruments/equipment-related issues and coordinates support operations. What You Bring: • High school diploma, GED, or equivalent., • 0-2 years related experience or equivalent combination of education and experience., • Working knowledge of quality systems, cGMP, policies, and procedures in the specialty area., • Experience operating manual, semi-auto and automatic production machinery preferred., • Transaction in SAP a plus., • Accurate and detail-oriented., • Team player/ flexible/ attentive to detail and quality minded., • Ability to work a flexible schedule, with overtime and weekends as needed. Total Rewards Package: At Bio-Rad, we’re empowered by our purpose and recognize that our employees are as well. That’s why we offer a competitive and comprehensive Total Rewards Program that provides value, quality, and inclusivity while satisfying the diverse needs of our evolving workforce. Bio-Rad's robust offerings serve to enrich the overall health, wealth, and wellbeing of our employees and their families through the various stages of an employee’s work and life cycle. Benefits: We’re proud to offer a variety of options, including competitive medical plans for you and your family, free HSA funds, a new fertility offering with stipend, group life and disability, paid parental leave, 401k plus profit sharing, an employee stock purchase program, a new upgraded and streamlined mental health platform, extensive learning and development opportunities, education benefits, student debt relief program, pet insurance, wellness challenges and support, paid time off, Employee Resource Groups (ERG’s), and more! Compensation: The estimated hourly rate for this position is $21.20 to $29.13 at the time of posting. Actual compensation will be provided in writing at the time of offer, if applicable, and is based on several factors we believe fairly and accurately impact compensation, including geographic location, experience, knowledge, skills, abilities, and other job permitted factors. This position is eligible for a variable annual bonus, which is dependent upon achievement of your individual objectives and Company performance. Who We Are: For 70 years, Bio-Rad has focused on advancing the discovery process and transforming the fields of science and healthcare. As one of the top five life science companies, we are a global leader in developing, manufacturing, and marketing a broad range of high-quality research and clinical diagnostic products. We help people everywhere live longer, healthier lives. Bio-Rad offers a unique employee experience with collaborative teams that span the globe. Here, you are supported by leadership to build your career and are empowered to drive change that makes an impact you can see. EEO Statement: Bio-Rad is an Equal Employment Opportunity/Affirmative Action employer, and we welcome candidates of all backgrounds. Veterans, people with physical or mental disabilities, and people of all race, color, sex, sexual orientation, gender identity, religion, national origin and citizenship status are encouraged to apply. Agency Non-Solicitation: Bio-Rad does not accept agency resumes, unless the agency has been authorized by a Bio-Rad Recruiting Representative. Please do not submit resumes unless authorized to do so. Bio-Rad will not pay for any fees related to unsolicited resumes. Fraud Alert: Bio-Rad has received reports of individuals posing as Bio-Rad recruiters to obtain information, including personal and financial, from applicants. Beware of these fake "recruiters" and job scams. Click here for more information on this scam and how to avoid it. #LI-JTS Legal Entity: (USA_1000)Bio-Rad Laboratories, Inc.

Job DescriptionDescription: AdvancedPCB, a printed circuit board (PCB) manufacturer, is seeking a reliable, motivated Imaging Operator to join our growing company. The ideal candidates must be able to work in a fast-paced, team environment, show a true sense of urgency, and be willing to cross-train. Dry film photoresist is the key component used in the image transfer process. It is widely used in precision etching and electroplating products such as Printed Circuit Boards. The Imaging Technician will perform all aspects of this process. Essential Job Function: • Operate all department equipment, quality checks, preventative maintenance and minor repairs, • Enter jobs into the manufacturing tracking system, • Read and interpret shop order to verify that all previous operations were completed, to verify count and to verify quality, • Maintain a safe, neat, and organized workplace Work Schedule: This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends when schedule details are provided in advance. Work schedule is Monday night through Saturday morning, 10:30 pm to 7:00 am. Requirements: Essential Qualifications, Education and Experience: • High school diploma or equivalent, • 1 year of PCB manufacturing experience or similar manufacturing related industry Preferred Additional Skills: • Ability to read, write and communicate in English., • Ability to stand 8-12 hours throughout the shift., • Ability to lift 30 pounds without straining. Physical Requirements: • Prolonged periods sitting and performing visual and manual tasks., • Fine Motor Skills, • Ability to use microscopes for long periods of time performing job duties. Compensation/Benefits: California Pay Range: $19.00 - $25.00 per hour USD | DOE The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Advanced PCB offers a variety of health and benefit programs. Which include Medical, Dental, Vision Insurance, HSA plans, Hospital and Accident plans, Life Insurance, PTO, Matching 401k, and Paid Holidays. About AdvancedPCB APCT, Advanced Circuits and San Diego are now unified as AdvancedPCB. Though the name is new, our commitment to our customers has remained unchanged. AdvancedPCB is the most comprehensive provider of printed circuit board solutions in the country. As a result of the combination of the capabilities of APCT, Advanced Circuits and San Diego PCB, AdvancedPCB offers competitive products for applications both large and small, and every interaction will be infused with our core belief that customer centricity is key. Today, more than 40 years after our founding, we are proud to be the nation’s leader in printed circuit board solutions, offering full-scale design, fabrication and assembly, consistently faster than the industry standard. We take pride in offering full-service solutions that meet the unique demands of any PCB customer need, while providing best-in-class customer service at every touchpoint. ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us! https://www.advancedpcb.com/en-us/