Trabajos status en Chesapeake, VA - Page 18Crear alertas

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Assure Nondestructive Testing (NDT) inspections are in compliance with customer directives, requirements, and specifications. This individual will be qualified to properly set up and calibrate equipment to interpret and evaluate results with respect to applicable codes, standards, and specifications. This individual will be familiar with the scope and limitations of the NDT methods for which qualified/certified and will exercise assigned responsibility for on-the-job training and guidance of NDT trainees and NDT Level I personnel. This individual will be able to organize and report the results of NDT inspections. Ensure the requirements set forth in the company Process Instructions and QA Manual are adhered to and enforced. Other duties include working outside of the NDT field in a Tiger Team work environment. Travel and overtime may be required. Strong analytical skills required. Duties And Responsibilities Expectations of this function are: \n • Performing proper set up and calibration of NDT equipment. Interpretation and evaluation of NDT results with respect to applicable codes, standards and specifications. \n, • This individual will be familiar with the scope and limitations of the NDT methods for which qualified/certified. \n, • This individual will be able to organize and report results of NDT inspections. Methods include as a minimum: Visual Inspection (VT), Dye Penetrant Inspection (PT) and Magnetic Inspection (MT) methods may also be used.\n, • Maintaining custody of the equipment required for Level-II NDT inspections.\n, • Maintaining personal NDT training and qualifications.\n EXPERIENCE AND EDUCATION: \n • High School/GED education at a minimum.\n, • Previous Military or industrial training/qualification/certification/experience must be documented to meet Level II requirements.\n, • As an option, this individual may have been a NDT Level I or NDT Trainee at OII-MSD to meet previous training/qualification/experience requirements.\n, • At a minimum, this individual will be certified, able to work independently, and proficient in the following methods: VT and PT.\n, • Additional certifications of other NDT methods preferred, i.e. MT, UT, RT, ET.\n, • NBPL certification a plus.\n, • Technical knowledge with submarine and/or surface combat ships recommended.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems. Select proper materials and requirements to perform welding functions. Fabricate and install fixtures and jigs required for welding process alignments. Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required. Duties And Responsibilities \n • Requires no supervision/oversight. Has experience in the trade qualifications and can perform all work required as a Welder and will provide mentoring to junior craftsman. \n, • Must be able to understand and perform the set-up, adjustment, and operation of various welding equipment and hand tools used in the trade. Select welding filler material, joint design and proper heat ranges as directed by Technical Work Documents. \n, • Read and understand terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process. \n, • Fabricate and install fixtures, jigs, supports and targets to ensure proper alignment during welding processes.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop. \n, • Must have the ability to obtain government base access. \n, • Knowledge and practical skills tests required. \n, • Qualify as a Welder/Workmanship Inspector in accordance with OII Process Instructions and welding procedures.\n, • Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification. Automated welding processes.\n, • Must be able to obtain a Secret/Confidential security clearance.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night\n, • Frequently working on or near moving equipment and vibrating equipment\n, • When outdoors, humidity is frequently above 90%\n, • Noise is over 85 decibels\n, • Light is intense/glare\n, • Occasional exposure to open fire/flames/sparks\n, • Frequent exposure to airborne dust, fumes, and gases\n, • Includes exposure to contaminants\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable\n, • Job tasks are performed in close physical proximity to other people\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection for body, vision, and hearing protection.\n\n Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Job DescriptionDescription: Attention all Optometry Technicians we are calling on you to work with us providing Vision Exams and treatment to our Military Service members. We will primarily work weekends, with some occasional weekdays in the State of _______ on an "as needed basis". We provide health readiness services to meet the medical and dental requirements to maintain a deployable military force for the following: • U.S. Army Reserve (USAR), • Army National Guard (ARNG), • U.S. Navy Reserve (USNR), • U.S. Marine Forces Reserve (MARFORRES), • U.S. Coast Guard Reserve (USCGR), • Air National Guard (ANG) Working as an optometric technician can include the following duties: • Helping the optometrist with procedures and patient care, • Taking patient histories and maintaining the patient records system, • Assisting patients to select a suitable frame for their glasses, • Demonstrating care and maintenance of lenses to patients, • Repairing minor issues with broken and damaged eyeglasses, • Keeping the office organized and presentable, and making the exam room ready, • Testing visual acuity, depth perception, pressure and pupil reflexesRequirements:, • 1+ years of experience as an optometric or ophthalmic technician, • Experience performing visual fields, OCTs, and Fundus Photography is required, • Experience with computers, including knowledge of and experience with word processing, database, and spreadsheet programs Join our team, and become a part of a bridge for better health. If you are made a conditional offer of employment, you will be required to undergo background check (including criminal record check) and drug screening. We use E-Verify in our hiring process. DOCS Health is committed to ensuring equal employment opportunity. All employment decisions, policies, and practices are in accordance with applicable federal, state, and local anti-discrimination laws. DOCS Health will not engage in or tolerate unlawful discrimination (including any form of unlawful harassment) on account of a person's sex (including pregnancy), age, race, color, religion, national origin, ancestry, citizenship, physical or mental disability, sexual orientation, gender nonconformity, status as a transgender individual, gender identity, genetic information, marital status, family responsibility, armed services, or any other status protected by law.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: NDT VT, MT, PT Inspector, Level II REPORTS TO: NDT Examiner, LIII PAY RANGE: $30.00 - $35.00/Hourly DOE This position is eligible for a one-time bonus in the amount of $2,000.00 following successful completion of VT, and MT NDT Level II method certifications, and following a minimum of 90 days of employment. Summary of position: NDT inspector level II will perform VT, MT and PT inspections on surface ship and submarine structure. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Required Education: High school graduate, or GED Responsibilities: • Performs physical inspections of completed welds and materials on board surface ships and submarines, • Work to approved company inspection procedures, • Assist with Reviews and writing procedures/standards for VT, MT, and PT processes, • Provide on the job training for trainees and LI/LII inspectors, • Ensure work is done safely and meets quality standards, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Report any unsafe work conditions or practice to supervisor, • Qualified NDT VT, MT, and PT Inspector Level II IAW NAVSEA requirements in Tech pub 271 (PT is preferred but not required.), • Experience with SMAW, GTAW and GMAW welding highly preferred, • Have knowledge of welding joint design and joint fit up requirements, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week Mental Requirements: Must be able to carry out simple to complex instructions in a safe and efficient manner. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Location Portsmouth, VA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder II for our Norfolk, VA office beginning on or around June 2nd . The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Duties & responsibilities include, but are not limited to the following: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments.\n, • Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.\n, • Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Leads technical project teams, schedules, reports and briefs customers and senior management.\n, • Performs duties outside of specialty in order to complete installation or work assignment.\n, • Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.\n, • Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.\n\n Experience and Skills \n • Must possess a high school, trade or vocational school degree\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred\n, • Must have or have the ability to obtain a SECRET clearance\n, • Must have the ability to obtain base access and security credentials\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces\n, • Travel may be required within and outside of the continental United States\n, • Due to export control regulations, this role is open to U.S. citizens of the US \n, • Demonstrated reliability and punctuality; must be able to consistently report to work on time\n, • Possess basic and some advanced specialized welder's tools\n\n Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran". "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description GENERAL SUMMARY:Provide support to the US Navy LOCATION:Norfolk, VA PRINCIPAL DUTIES/RESPONSIBILITIES: • 1 - 3 years of experience., • Experience working in a shipyard / ship repair environment., • Able to read and interpret blueprints, sketches, written technical instructions and manuals, and lead and supervise their implementation., • Prospective employees must be a US Citizen with a Clean Background and able to pass a Drug Screen, • Experience working on all classes of ships (CVN, CG, DDG, SSN). Able to hold and maintain a security clearance a plus, • High school diploma or GED equivalence, • Ability to obtain DBIDS is required.\n EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-25-00060 This position is currently accepting applications.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent Job Overview:Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education: High school graduate, or GED Responsibilities: • Ensure work is done safely and meets quality standards, • Set up welding machines based on the job at hand or using a Welding Procedure Specification, • Must have own basic skill related tools and equipment if not supplied by the workplace, • Weld steel, aluminum and stainless steel components based on the required weld processes and parameters, • Adhere to the specific welding procedure specifications, • Set up welding cells for serial production runs, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Assist in the preparation of product for shipment, • Report any unsafe work conditions or practice to supervisor, • Six months to one-year related experience and/or training, • Experience with steel, aluminum and/or stainless steel required, • Experience with SMAW, GTAW and GMAW welding highly preferred, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Knowledge of welding equipment and associated tooling including proper set up and use, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week, • Pass substance abuse testing, • \nReasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.\n\n Location Portsmouth, VA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

1st Class Drydock Mechanic Purpose: Colonna's Shipyard is seeking a 1st Class Drydock Mechanic to support drydock operations in Norfolk, VA. Job Description: • Responsible for accomplishing all duties of a lower classman., • Block and haul various vessels and splice three strand ropes., • Builds keel and bilge blocks, cradles, and shoring for supporting ships in dry dock, marine railways, shipways, or building docks, using woodworking hand and power tools., • Positions and secures blocking in accordance with the ship's blueprints., • Use centering chains, lasers, oil sticks, and magnetic tapes., • Identify various types of wood (Oak, Pine, Salt Treated, Composite) and ropes (Nylon, Samson, single braided, double braided, synthetic, manila etc.)., • Become proficient in dry dock, railway, and travelift line handling., • Moor vessels using different types of mooring equipment (Cleats, bitts, bollard bitts, chocks, H bitt, etc.), with instruction., • Tie various knots (Barge hitch, Tow bridal)., • Operate the following equipment, completing any required training beforehand:, • Drydock equipment (Capstan, grip hoist, flood valves, discharge valves), • Forklifts, • Impact wrench, • Nail gun, • Come a long, • Industrial Planer, • Winches, • JLGs, • Small boats, Oil booms, moving floats, and Yokohamas., • Perform basic chainsaw operation (Startup, blade change, general maintenance)., • Train on emergency procedures relating to drydocks, railways, and travel lift., • Complete the maintenance tasks of dry docks and railways successfully., • Locate Stern Reference Points (SRP)., • Learn and execute introductory blueprint reading skills., • Complete maintenance of drydocks and railways and perform rigging duties, as needed., • Read and understand a table of offsets and Gearman (railway gear and track watch)., • Train on guiding Travel lift on and off pier as well as grade beams., • Work as deckhand and assist in hooking up tugs to vessels., • Identify all piers and berthing locations within the shipyard., • Must have 24/7 availability., • Must have at least five (5) years of maritime experience in trade., • Must have some technical training., • Must have knowledge of and ability to use hand tools and instruments associated with the Mechanic., • Must be able to work effectively with others., • Must have regular, reliable attendance., • Must be able to work independently to complete responsibilities., • Ability to obtain DBIDS preferred., • Experience operating small boats, JLG, chainsaws, and industrial planers preferred., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

3rd Class Drydock Mechanic Purpose: Colonna's Shipyard is seeking a 3rd Class Mechanic to support docking operations at our site in Norfolk, VA. This position works 1st shift (Mon-Fri 7am-3:30pm). Job Description: • Able to accomplish all duties of lowerclassmen, • Block and haul various vessels, • Builds keel and bilge blocks, cradles, and shoring for supporting ships in dry dock, marine railways, shipways, or building docks. Using woodworking hand and power tools, • Positions and secures blocking in accordance to ship's blueprints, • Proficient in using centering chains, lasers, oil sticks, and magnetic tapes, • Ability to identify various types of wood (Oak, Pine, Salt Treated, Composite, etc.), • Ability to identify various types of ropes (Nylon, Samson, single braided, double braided, synthetic, manila etc.), • Proficient in dry dock, railway, and travelift line handling, • Ability to moor vessels using different types of mooring equipment (Cleats, bitts, bollard bitts, chocks, H bitt, etc.) with instruction, • Ability to tie different knots (Barge hitch, Tow bridal), • Qualified to operate the following equipment:, • Drydock equipment (Capstan, grip hoist, flood valves, discharge valves), • Forklifts, • Impact wrench, • Nail gun, • Come a long, • Basic chainsaw operation (Startup, blade change, general maintenance), • Trained in emergency procedures on drydocks, railways, and travel lift, • Successfully complete the maintenance tasks of dry docks and railways, • Ability to locate Stern Reference Point (SRP), • Introductory Blueprint reading skills, • Rigging duties, • Trained in guiding Travel lift on and off pier as well as grade beams, • Ability to deckhand and assist in hooking up tugs to vessels, • Must identify all piers and berthing locations within shipyard, • Will be required to adhere to safety policy and wear personal protective equipment- hard hat, safety glasses, steel toe boots/shoes and, when necessary, respirator, • Understand and act upon instruction, • Work independently to complete responsibilities, • 24 hour and 7 day (24 / 7) availability, • At least 1 year of maritime experience in trade, • Technical training required, • Knowledge of and ability to use hand tools and instruments associated with the Mechanic, • Must be able to work effectively with others, • Must be a steady, reliable worker, • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Lead Mechanic Supervisor- Pipe Fitting (2nd Shift) Purpose: Colonna's Shipyard is seeking a Lead Mechanic Supervisor to oversee 2nd Shift Pipe Fitting operations in Norfolk, VA. Position Summary: Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Essential Duties and Responsibilities: Key responsibilities include: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised), • Must have the ability to understand job specifications, drawings, and corresponding technical references., • Must have the ability to use hand tools and instruments associated with the Pipefitting trade including but not limited to, pipe benders, bandsaws, bench grinders, drill presses, pipe threaders., • Must be able to work effectively with others., • Must be trained in the NAVSEA Standard Items that are applicable to the pipefitter trade and demonstrate an advanced understanding of bevels, types of backing rings, consumable inserts (E/B rings), open roots, saddles, miters and tolerances., • Must be able to comprehend blueprints, sketches, and templates., • Must be able to calculate and understand units of measure, including fractions and decimals., • Must know how to measure using a scale and tape measure., • Must be able to comprehend and follow complex instructions., • Must be self-motivated and able to complete responsibilities with minimal direction., • Minimal Travel; 10% or less. \n\n Security Requirements: • Must be able to access government facilities and be DBIDS eligible., • Position requires you to obtain and maintain a DBIDS., • Position requires US Citizenship.\n\n Physical Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • Must be able ride ships at sea for extended periods., • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee may be required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description GENERAL SUMMARY: Proficient in ability to install, overhaul, and repair US Naval submarine and ship machinery, mechanical systems, and components such as pumps, valves, launchers, and actuators as well as assisting project teams with the installation of structural and piping components. LOCATION: Norfolk, VA. DUTIES/RESPONSIBILITIES: • Performs installation, repair, and overhaul of machinery, mechanical systems, and components., • Performs system or component level inspections as directed by the Project Manager., • Assists welders and pipefitters with fit up and installation of structural and piping components., • Performs installation, repair, and overhaul in accordance with Technical Work Documents (e.g. QAWBs, Maintenance Standards, & Technical Manuals) and associated drawings., • Responsible for documenting inspections and work performed in both the Technical Work Document and on associated Objective Quality Evidence Forms as applicable., • Performs installation, repair, and maintenance utilizing hand tools, power tools, and Precision Measuring Instruments., • Expected to work well both independently and in a team setting., • Minimum of 3 years of experience in mechanical / equipment installation, repair, and overhaul on US Naval vessels; or completion of a formal related course of study through either a community college, technical or trade school, military training, formal company training program, or an apprenticeship program., • Submarine experience and experience with SUBSAFE, DSS-SOC, and/or LEVEL I systems and components is preferred., • Experience and working knowledge of utilizing hand tools, power tools, and Precision Measuring Instruments., • Experience working in shipyards and ship repair environments., • Possess ability to read, understand, and interpret Technical Work Documents and drawings., • While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear., • Frequently the employee is required to carry objects that might weigh up to 50 pounds., • High School Diploma or GED equivalency is required., • Prospective employees must be a US Citizen and capable of passing both a Criminal Background Check and a Drug Screen., • Current SECRET Level Security Clearance is required.\n EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-25-00107 This position is currently accepting applications.

IT Quality Assurance Analyst III Job Category: Engineering Time Type: Full time Minimum Clearance Required to Start: Secret Employee Type: Regular Percentage of Travel Required: Up to 10% Type of Travel: Continental US The Opportunity: Join NAVSEA 03S as an IT Quality Assurance Analyst supporting the Navy Maintenance and Modernization Enterprise Solution (NMMES), a mission-critical program that supports over 45,000 users executing naval ship and submarine maintenance operations worldwide. Key Responsibilities: Establish and maintain processes for evaluating software and associated documentation Determine resources required for quality control activities Maintain quality levels throughout the system life cycle Conduct formal and informal reviews at pre-determined points throughout the development lifecycle Provide daily supervision and direction to support staff Develop and implement quality assurance standards and procedures Lead quality control initiatives across multiple development teams Evaluate software quality across both legacy and modern applications Implement automated testing strategies and frameworks Collaborate with development teams to ensure quality is built into processes Report on quality metrics and provide recommendations for improvements Support compliance with DoD and industry quality standards Qualifications: Required: \n • Bachelor's Degree (STEM degree preferred but not required)\n, • At least 8 years of experience in IT quality assurance\n, • Strong knowledge of quality assurance methodologies and practices\n, • Experience with software testing and evaluation processes\n, • Proven leadership and team management abilities\n, • Understanding of software development lifecycle\n\n Desired: \n • Experience with DoD/Navy programs\n, • Quality assurance certifications (CSQA, ISTQB)\n, • SAFe certification\n, • Knowledge of automated testing tools and frameworks\n, • Experience with Agile testing methodologies\n, • Understanding of DoD quality and testing standards\n, • Experience with both legacy and modern testing approaches\n, • Project management experience\n\n What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose - to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy. Your potential is limitless. So is ours. Learn more about CACI here. Pay Range: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here. The proposed salary range for this position is: $90,300-$189,600 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Overview The United States Coast Guard (USCG) Command, Control, Communications, Computers, Cyber, and Intelligence (C5I) Service Center has been structured to deliver technology solutions for mission success by virtue of its six Product Lines and five Shared Service Divisions. The C5I community, through the CYBER-CIO-C4IT Transformation, is now better aligned with the Mission Support Business Model to more efficiently manage C5I assets over their full life cycle. The UHF/VHF Engineering Technicians provide logistical life cycle support of equipment/systems during the O&M, and disposition phases of the system development life cycle. The UHF/VHF Technician shall be able to track and utilize USCG logistical and support tools such as CGFixit (Remedy), EAL, ALMIS, SFLC Central and NESSS. The primary focus of this UHF/VHF Technician is support of SHORT-RANGE COMMUNICATIONS OBSOLESCENCE REPLACEMENT PROJECT (SCORP). The VHF / UHF communication suite provides the fleet with robust VHF / UHF communication capabilities both encrypted and unencrypted. Providing for the safe navigation and efficient communication within the maritime domain. This system is based on common architecture and is scaled to meet individual platform requirements across the USCG. The system was built by C5ISC using COTS parts, such as Motorola and Standard Horizon equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Provide depot level VHF/UHF equipment/system troubleshooting support to resolve trouble tickets, work orders and CASREPS generated from the USCG Centralized Service Desk utilizing, monitoring and updating CGFixIT (Remedy) or the Equipment Asset Log (EAL) application support tools., • Provide installation support of SCORP equipment, both hands on and providing oversite to others as needed., • Provide VHF/UHF equipment/system on-site technical support for analysis and/or repair requirements. Contractor shall also provide After Action report within five (5) days after site visit., • Provide VHF/UHF remote troubleshooting support, as appropriate, for identifying repair requirements., • Provide a weekly status report of all VHF systems Incidents/Work Orders/CASREPs that the contractor is actively supporting (CDRL A004)., • Maintain document management, including version/revision control and overall document organization., • Support BOD-FCDS with the development and maintenance of databases as necessary., • Provide data collection support by sending emails and making phone inquiries to field commands/units, then organize and document the data obtained., • Use Government provided feedback to make revisions/updates to technical and logistics documents and project plans., • Provide BOD-FCDS support as the VHF Engineering Technical Support Subject Matter Expert (SME) representative at meetings or represent BOD-FCDS when the BODFCDS SME is unable to attend., • Provide input to revise Equipment Integrated Logistics Support Plans (EILSP) and Equipment Support Sheets (ESS) and other logistics/supply chain documentation for the systems and equipment listed. NON-ESSENTIAL DUTIES: Other duties and responsibilities as assigned. REQUIRED SKILLS: Experience, Education and Licensure: • 10 years of experience with troubleshooting and maintaining DHS or DOD equipment. Certifications/Qualifications: • Preferred that the candidate completed a college electronics course curriculum with award of a BSEET/BSEE or achieved certification in an advanced electronics program from a technical school. SUPERVISORY RESPONSIBILITIES: None. ADDITIONAL QUALIFYING FACTORS: Travel required for this position will be about 50% of the year in the beginning, tapering off when the SCORP deployment is complete. As a condition of employment, must pass a pre-employment drug screening, as well as have acceptable reference and background check results. The Tatitlek Corporation gives hiring, promotion, training and retention preference to Tatitlek shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. As an equal opportunity employer, The Tatitlek Corporation recognizes that our strength lies in our people. Discrimination and all unlawful harassment, including sexual harassment, in employment is not tolerated. We encourage success based on our individual merits and abilities without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, marital status, citizenship status, military status, protected veteran status or employment. We support and obey laws that prohibit discrimination everywhere we do business. Salary $75-91k/annually

Lead Mechanic Supervisor - Outside Machinist Purpose: Colonna's Shipyard is looking to obtain a Lead Mechanic Supervisor - Outside Machinist to support our shipyard operations in Norfolk, VA. Position Summary: Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Essential Duties and Responsibilities: Key responsibilities include: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc.\n\n Additionally, position will: • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Provides input to management and project teams to support schedule, progress, ETC/EAC updates for all projects assigned to them.\n\n Required Qualifications: • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised), • Must have the ability to understand job specifications, drawings, and corresponding technical references., • Must have regular, reliable attendance., • Must have at least (5) five years shipboard experience within the trade to be supervised., • Must have supervisory experience in outfitting, commercial and or maritime., • Must be able to work effectively with others., • Must be a steady, reliable worker., • Must be able to comprehend and follow complex instructions., • Must be self-motivated and able to complete responsibilities with minimal direction., • Technical training preferred., • Prefer DBIDS Eligibility. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Lead Mechanic Supervisor- Gas Free Purpose: Colonna's Shipyard is seeking a Lead Mechanic Supervisor -Gas Free to support day shift operations in our Shipyard in Norfolk, VA. Position Summary: Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Job Description: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 7 years related trade experience (in the trade to be supervised)., • Must have the ability to understand job specifications, drawings, and corresponding technical references., • Must be able to work effectively with others., • Prefer some previous supervisory/mentoring experience (such as make-up supervisor). \n\n Security Requirements: • Must be able to access government facilities and be DBIDS eligible., • Position requires you to obtain and maintain a DBIDS., • Position requires US Citizenship.\n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods., • Able to perform other duties as required which may involve high heat, humidity, noise, and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal. \n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Requisition Number: 25021 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $41,600.00 - $50,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Summary Join HII as we keep the world's most powerful Navy afloat! Join our Elevator Support Unit (ESU) as a Marine Mechanic! This position will support contracted skilled trades work on Weapon Elevators and Aircraft Elevators and their systems on U.S. Navy ships. Travel within and outside of the continental United States may be required. This is a full-time position, located in Chesapeake, VA. What You Will Do • Perform maintenance and repairs on aircraft carrier elevators, cargo handling systems, vertical stores conveyors, and associated equipment., • Work closely with higher level employee in specialized assignments., • May train/assist other employees/navy personal on shipboard systems and day-today operation., • Work includes daily activities of physical labor in an industrial and shipboard environment., • Applies comprehensive understanding of production and processes toward completion of assignments.\n What You Must Have • High School education, or Trade School or equivalent, and 2 years of related experience., • Must be able to obtain medical clearance to wear a half-face respirator., • Must be able to obtain base access credentials within 60 days of start date, and maintain credentials throughout employment., • Must be able to travel when not assigned to local tasking., • Must have experience installing, maintaining and repairing structural and mechanical systems and associated equipment., • Must have experience using various power tools and measurement devices., • Must have the ability to read, interpret and follow blueprints, technical drawings and/or technical manuals., • Must have knowledge of safety and quality control steps and procedures., • Must be able to obtain and maintain a DoD security clearance, and maintain clearance level throughout employment., • Must be able to provide hand tools per trades designation.\n Preferred: Bonus Points For • Experience related to maintenance and repair of shipboard aircraft elevator, ordnance handling equipment, or vertical package conveyors preferred., • Prior Shipboard experience preferred., • Candidates who have graduated from and/or completed a vocational school, apprenticeship program or a skilled trades certificate program are preferred., • Current or active DoD clearance a plus., • OSHA 10 Maritime Certification a plus.\n Physical Requirements Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Norfolk, VA Summary: Performs routine mechanical work on U.S. Navy shore facilities, waterborne vessels, surface ships and/or submarines. Tasks will be related to inspections, repairs, modernization and/or alterations. Duties and Responsibilities include the following. Other duties may be assigned. • Proficient in the use of precision measurement equipment including scales, vernier calipers, micrometers and torque wrenches., • Experienced with use of torque wrench extensions and multipliers and operation of hydraulic torque wrench., • Proficient in the use of portable drill presses and milling machines., • Perform disconnects and connections of mechanical joints., • Removes and installs various equipment using sound engineering practices., • Overhauls various pumps and valves., • Ability to trouble shoot and determine faulty equipment, determine cause of malfunction and determine best repair method., • Performs hydrostatic tests of pumps, valves and piping., • Records test procedures and results, performs routine analysis and calculations, and makes recommendations to Team Lead., • Have the ability to read and follow technical manuals for various equipment., • Fills our objective quality evidence (OQE) forms., • May lead large teams of mechanics., • Provides work leadership and technical training to lower-level technicians., • Provides feedback to Team Leader of job status. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Must have completed a formal related course of study in trade through either a community college, technical or trade school, military training, formal company training program or an apprentice program., • Must have 10+ years of verifiable experience as a mechanic in an industrial environment (i.e., shipbuilding, ship repair or nuclear power plants).\n\n Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Equipment: • General Hand Tools, • Torque Wenches, • Precision Measuring Instruments, • Hydraulic Pumps \n\n Knowledge, Skills and Other Abilities: • Must be able to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of shipboard operating requirements., • and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is working on a ship. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-25-00043 This position is currently accepting applications.

Are You Craving A Career With An Industry Leader? Panda Express is searching for experienced leaders to join our store management team. Panda is 100% committed to the professional and personal development of our family of associates. That’s why we offer paid Store Management Leadership Training, mentorship, and support from our Panda community that cares about your success. What You'll Do As A Store Manager: You are in charge of the operation of a single store. This includes, but is not limited to, hiring, managing and directing of associates to achieve financial goals and ensuring the delivery of exceptional guest experiences. It's up to you to make your store a success. Don’t worry! In order to prepare you for success, we will provide an 8 or more weeks of store leadership training program. How we reward you:** • Free meals while working at Panda, • Generous compensation package with bonus opportunities, • Medical, Vision, Dental, Voluntary Short-Term Disability, Cancer Income Protection insurance for full-time associates, • Pre-Tax Dependent Care Flexible Spending Account, • 401K with company match, • Paid time off, paid holidays, bereavement/funeral leave and Leave Share Program, • Discounts at theme parks, gym memberships, and much more, • Opportunity to give back to your community, • Hands-on paid training to prepare you for success, • On-Going Career & Leadership Development, • Opportunities for growth into management positions, • On-going career and leadership development, including comprehensive training, • Continuous education assistance and scholarships, • Lucrative associate referral bonus, • Income protection including Disability, Life, and AD&D insurance, • Pre-Tax Dependent Care Flexible Spending Account **Candidates must meet, and continue to meet if employed, eligibility requirements for each benefit to qualify. Desired Skills & Experience: • High school diploma required, • Flexibility to work in a store within a 50-mile radius, • Able to work a flexible schedule, including weekends, • Food Safety: Serve Safe certified ADA Statement: While performing duties, counter areas are often hot with steam from steam table and food vapors. Workspace is restricted and employees are generally expected to remain standing for long periods of time. Employees must prepare hot and cold foods, use Chinese cook knife and other kitchen equipment and work quickly without losing accuracy. Employees must be able to lift up to 50 lbs., stand up to four hours and reach across counter tops measured at 36 inches to serve customers. Kitchens are hot and noise levels are usually high; storage space is limited and shelving is high. Employees must be able to work in a fast-paced work environment, have effective verbal communication skills, ability to adapt to a dynamic environment with changing priorities, and the ability to manage conflicts/difficult situations. Panda Strong since 1983: Founded in Glendale, California, we are now the largest family-owned American Chinese Restaurant concept in America. With close to 2,300 locations globally, we continue our mission of delivering exceptional Asian dining experiences by building an organization where people are inspired to better their lives. Whether it’s impacting our team or the communities we work in, we’re proud to be an organization that embraces family values. You’re wanted here: We value diversity in all forms and know the strength it brings. Workplace equality allows for creative ideas to bloom, diverse points of view to be heard, and improves overall happiness. We like the sound of that. Panda Restaurant Group, Inc. is an Equal Opportunity Employer and is committed to providing equal opportunity, and does not discriminate on the basis of any characteristic protected by law, including but not limited to sex/gender (including pregnancy, childbirth, lactation and related conditions), gender expression, race, color, religion, national origin, sexual orientation, gender identity, disability, age, ancestry, medical condition, genetic information, marital status, and veteran status. Additionally, Panda Restaurant Group, Inc. complies with all federal, state, and local laws regarding requests for workplace accommodations. If there is a reason you believe you require an accommodation, please reach out to our accommodation team vie email at .

The Quality Assurance Supervisor is responsible for ensuring timely and effective implementation of all company's policies, procedures, and activities involved in assuring the quality of services and products. She/he maintains close working relationships with other department managers and supervisory personnel in order to meet and maintain product and service quality, identify, solve and prevent problems affecting service/product quality, maximize productivity, and comply with regulatory requirements. They serve as a representative of the Management Team and report to the kSARIA Service Corporation Quality Assurance Manager. kSARIA offers its employees a comprehensive benefits package including Health, Dental, Life and Disability, PTO, Paid Holidays, 401(k) Essential Duties and Responsibilities \n • Support Quality Assurance processes in the development of key components of the Quality Assurance Work Procedures, Test Procedures, and Objective Quality Evidence (OQE).\n, • Support development, review, and ensure compliance with on-site production Work Packages and Technical Work Documents (TWD).\n, • Obtain output information from production leads\n, • Support development of project plans and project-related documents (i.e., Project Charter, Production BOM, etc.)\n, • Confer with the Program Management Office (PMO) to determine project status, resource usability, and customer guidelines\n, • Provide input capturing Lessons Learned regarding Work Processes, Quality, scheduling, manpower, and resource utilization impacting project completion\n, • Provide input for clear and concise instruction of work items to ensure full compliance with customer specifications and requirements\n, • Compile and review test and inspection records for all completed tasks\n, • Read, understand and follow customer work item instructions, drawings, and routing diagrams to ensure full compliance of installed components and assemblies.\n, • Support the maintenance of test equipment and ensure proper setup and calibration.\n, • Additional Responsibilities include:\n, • Review engineering design plans, design concepts, and proposals for adequacy, test specifications, and fabrication and installation methods and processes. \n, • Ensure Quality Management System is in compliance with NAVSEA Standard Items and NAVSEA Technical Specifications as required by contract.\n, • Maintain training records to ensure compliance with contract requirements. \n, • Implement and administer the Corrective Action and Preventative Action processes, to include convening fact findings and critiques.\n, • Conduct periodic internal audits as required for compliance.\n, • Conduct frequent surveillances to maintain an atmosphere of quality and safety standards.\n, • Additional collateral duties and responsibilities may be assigned to support the overall business unit operation.\n\n Requirements \n • Must have a minimum of 5 years relevant experience working in ship repair onboard US Navy ships. Experience installing, terminating, and testing fiber optic and copper multi-pin and RF cable assemblies is a plus.\n, • Must be familiar with NAVSEA Standard Items and specified test requirements\n, • Ability to read, understand and follow customer work item requirements, drawings, and wiring diagrams\n, • Individual must have keen attention to detail and be quality metric driven\n, • High School Diploma\n PM19

Lead Mechanic Supervisor - Corrosion Control Purpose: Colonna's Shipyard is seeking a Lead Mechanic Supervisor - Corrosion Control to support our 2nd shift (3pm-11:30PM) operations in our Shipyard in Norfolk, VA. Position Summary: Position will support management with training and assignment of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge in support and execution of production goals in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require occasional travel. Essential Duties and Responsibilities: Key responsibilities include: • Primary duty is to execute routine (and non-routine) production duties in support of operational goals and in compliance with Company procedures and policies., • Performs skilled tasking (relative to their assigned trade) in the maintenance, repair, installation/removal, new construction, etc. activities supporting ship repair/industrial fabrication operations., • Supports management to facilitate daily production activities of the team and helps ensure employees (assigned to their work crew) have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • May assist management with timekeeping validation, training, performance management, coaching/counselling, supervision, etc. for employees assigned to their work crews., • Breaks broader production requirements down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Utilizing their production knowledge, make recommendations to support Plan of the Day (POD) for their assigned projects and utilizing their assigned resources to efficiently achieve operational requirements of projects., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc., • Manage, supervise, and direct the day-to-day efforts of the Corrosion Control employees., • 75-80% of the time will be spent aboard ship or in the shop supervising staff.\n\n Additionally, position will: • Review project specifications/SOWs and support creation of requisitions of all needed materials in accordance with contract requirements and associated references., • Generate and submits production reports to management (to include condition and surveillance reports, operational briefs, executed quality checks, etc.) meeting all technical/customer reporting requirements., • Support management in ensuring tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Initiates QA/Customer call out and attends/executes TIP inspections., • May serve as backup/makeup to supervisor, as needed., • Provides input to management and project teams to support schedule, progress, ETC/EAC updates for all projects assigned to them. \n\n Required Qualifications: • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised)., • Must have the ability to understand job specifications, drawings, and corresponding technical references., • Must be able to work effectively with others., • Must be steady, flexible, reliable worker. \n\n Preferred Skilled/Qualifications: • Some previous supervisory/mentoring experience (such as make-up supervisor), • NBPI Certification (NAVSEA basic paint inspector) preferred., • C-7 (Abrasive Blaster) Certification preferred., • C-12 (Airless Spray Applicator) Certification preferred., • C-13 (Ultra- High-Pressure water-jetting) Certification preferred., • C-14 (Plural Component Pump operator/Sprayer) Certification preferred. \n\n Security Requirements: • Must be able to access government facilities and be DBIDS eligible., • Position requires US Citizenship.\n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Applied Technical Services, LLC ("ATS" or the "Company") is a leading provider of critical testing, inspection, certification, and compliance services. The Company serves clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense. ATS was founded in 1967 and is headquartered in Marietta, GA. Today the Company employs nearly 2,100 team members in over 95 locations across the United States. Our purpose is to create a safe and reliable world and our mission is to deliver assurance through precise technical and professional services. Summary: ATS is seeking NDT Level II Techs & NDT Assistants/Trainees to support our Chesapeake, VA office. Responsibilities/Duties: NDT Assistants/Trainees • Perform tasks as directed in order to prepare components or equipment for inspections., • Work alongside certified technicians to help complete projects and learn activities., • Interface with personnel to determine scope of work and work priorities in order to meet customer expectations., • Interface with personnel to determine scope of work and work priorities in order to meet customer expectations., • Help clean and organize equipment before, during, and at the completion of projects., • Document on job training experience as assigned by management., • Perform other job related tasks as assigned by supervisors. Responsibilities/Duties: NDT Level II Technicians • Perform examinations of materials in accordance with procedures, codes, standards, and specifications., • Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for OJT and guidance of trainees, • Interface with department managers and clients to determine scope of work and work priorities in order to meet customer expectations., • Be able to prepare written instructions and to organize and report the results of examinations., • Work independently and support team members Perform other job related tasks as needed and assigned by supervisors. Qualifications Minimum: Requirements/Qualifications: • NDT Assistants/Trainees High School Diploma, GED, or equivalent; math and print reading skills; ability to used computers for data entry and report writing; Applicants with documented prior NDT classroom training or OJT preferred., • NDT Level II Technicians Meet the minimum requirements of an NDT Assistant/Trainee; provide documentation of education, training, and experience in the applicable NDT method(s); have a working knowledge of industrial environments and general manufacturing processes; ability to effectively communicate with other departments, and customers to report issues and solve problems. All applicants require the following: • Ability to learn and comply with all company policies and procedures., • Excellent communication skills written and verbal., • Applicants must pass a drug screen and have a valid drivers license with a clean driving record., • U.S. Persons Only: A requirement of this position is access to information that is subject to U.S. export controls under the U.S. International Traffic in Arms Regulations (ITAR). Accordingly, the company will consider only U.S. Persons for this position. A U.S. Person includes (a) U.S. citizens or nationals; (b) U.S. lawful permanent residents (i.e., green card holders); (c) persons granted refugee status; or (d) persons granted asylum in the United States. This information is collected solely for purposes of complying with U.S. export control requirements and will not be used to unlawfully discriminate in the hiring process. Work Conditions: • Must be able to wear safety equipment as required by the safety department for personal protection., • Work from heights on scaffolding, ladders, elevated platforms, man-baskets, etc., • Work in confined spaces which will require crawling, stooping, climbing, etc., • Work in around operating equipment and industrial environments., • Work with radiation and hazardous materials such as cleaners, penetrants, film developing chemicals, etc., • Work shifts up to 12 hours/day and 7 days/week and travel for extended periods of time, • Ability to lift and carry 100 pounds. Benefits: ATS offers excellent wages and advancement opportunities. ATS full-time employee benefits include: medical, dental, vision, 401k, vacation, personal time, and bonuses. EOE/AA/M/F/Vet/Disabled ATS is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Overview: Nurse Practitioner/Physician Assistant PRN – Home Risk Assessments New Grad NP's welcome to apply $1,500 Sign-On Bonus About Us: Matrix Medical Network offers a broad range of clinical services and proven expertise that give primary care providers and the at-risk health plan members we visit with every day the tools and knowledge to better manage their health at home. With deep roots in clinical assessment and care management services, our national network of clinicians break through traditional barriers to care by meeting those members where they are. We help older adults and other at-risk individuals enjoy a better quality of care, experience improved health outcomes, and identify chronic conditions that may otherwise go undiagnosed. Our job opportunities allow you to leverage your expertise and compassion to make a direct impact to the health and well-being of others. Join our team and be rewarded by competitive compensation and flexible scheduling while making a difference in the community! About the Position: During a visit that can last up to one hour, Matrix providers review and observe a member’s current health, medical history, medication adherence, social environment and other risks. This provides unmatched insight into a member’s overall health and well-being that can be difficult to capture during routine office visits. The Matrix Comprehensive Health Assessment helps to improve quality of care and allows us to potentially close multiple care gaps with a single visit. Our Culture: • We have a clear vision of where we are going, and we are guided by core values that embody our organization and culture, • We emphasize innovation and growth, and you will be given the opportunities and tools to develop personally and professionally, • We encourage and celebrate collaboration, • Conduct Adult/Geriatric Assessments, medical history, diagnosis and treatment, health education, physician referrals, case management referrals, follow-up and clear documentation according to Matrix guidelines and protocols, • Work collaboratively with physicians, case managers, social workers, family members, key caregivers and any ancillary medical personnel as appropriate, • Collaborate with Primary Care Physician (PCP) on patient education, provide follow-up Type: PRN - Flexible PAY: Earn from $2,200 up to $11,000 per month (Based on an average of 20-100 completed visits per month, and pay of $110.00 per completed assessment). Compensation range is based on availability and assessment completion. Location: Home, SNF and other community environments in Portsmouth, Virginia Hours: Days, Evening, Nights, weekend, Flexible Scheduling Benefits: PRN providers are non-benefited except for 401(k) and limited Voluntary Benefits Mileage Reimbursement plan Qualifications: Must Haves: • Master’s Degree required OR commensurate experience and satisfactory completion of NP licensure, • Master’s Degree required OR commensurate experience and satisfactory completion of PA licensure, • Current RN and NP or PA licensure in state of practice to include prescription authority or the ability to obtain prescriptive authority, • Board certified by the NCCPA, AANP, ANCC or the AACCN in a Matrix approved specialty, • Have a current BLS, ACLS or CPR certification, • 1 year experience as a Nurse Practitioner/Physician Assistant preferred, new grads encouraged to apply. Have the ability to travel either in state or out of state, • Have strong computer skills and familiarity with EMR software, • Possess excellent verbal and written communication skills with patient, clients and colleagues, • Travel required to meet patients where they live, • Ability to travel - Valid state driver license, able to drive a car, proof of adequate automobile insurance coverage for the state of residence Matrix Medical Network is an Equal Employment Opportunity Employer. It is the policy of Matrix to provide equal employment opportunities without regard to race, color, religion, sex, gender identity or expression, pregnancy, age, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information or any other protected characteristic under applicable law. It is also the policy of Matrix that qualified individuals with disabilities receive equal opportunity in regard to job application procedures, hiring, and all aspects of the employment process. Matrix is committed to the full inclusion of all qualified individuals. Consistent with the Americans with Disabilities Act (ADA) and applicable state and local laws, it is the policy of Matrix to provide reasonable accommodation when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed to participate in the job application or interview process, pre-employment testing, to otherwise participate in the selection process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact . Portsmouth, VA 23701 Primary Location: Portsmouth, VA 23701 Job: Clinical—Nurse Practitioner (NP) or Physician Assistant (PA-C). Regular Shift. PRN time Job Level: Day Job, 8am, 7pm, Travel, Monday, Friday. No on-call, no evening, no weekend hours unless desired. Job, Clinical, Nursing, Work from Home Opportunity, Regular, Job Type, Standard, Travel, Flexible, Pay, No Call, Hours. #LI-PG1

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Norfolk, VA Summary: Sheet metal mechanics are responsible for the layout, fabrication and installation of sheet metal parts made from sheet thicknesses up to 1/8 inch such as bulkheads, lockers, outfitting and furnishings and miscellaneous brackets. Sheet metal mechanics prefabricate, fit, install sheet metal structures in position for welding or riveting or other methods of mechanical fastening. Sheet metal mechanics prepare templates for fabrication of nonstandard parts. Duties and Responsibilities include the following: Other duties may be assigned. • Helps fabricate templated for bending / shaping ship shipboard structures, frames, bulkheads and brackets., • Assists with measurements, layout and cutting of templates., • Perform grinding and cleaning of surfaces to be welded or riveted using power and hand tools., • Proficient in riveting and fastening panels and sheet metal structures., • Perform housekeeping efforts to maintain cleanliness of the worksite., • Deliver materials as required., • Performs duties as Fire Watch., • Participates in special projects as required., • Employees may be required to travel for work to other locations\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Typically requires 1-5 years related experience. Equipment: General Hand Tools Knowledge, Skills and Other Abilities: • Must be able to read and understand material safety data sheets (MDS). While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is working on a ship. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-25-00045 This position is currently accepting applications.

2nd Class Drydock Mechanic Purpose: Colonna's Shipyard is seeking a 2nd Class Drydock Mechanic to support drydock operations in Norfolk, VA. Job Description: • Responsible for accomplishing all duties of a lower classman., • Block and haul various vessels., • Splice 3 strand ropes., • Builds keel and bilge blocks, cradles, and shoring for supporting ships in dry dock, marine railways, shipways, or building docks, using woodworking hand and power tools., • Positions and secures blocking in accordance with the ship's blueprints., • Use centering chains, lasers, oil sticks, and magnetic tapes., • Identify various types of wood (Oak, Pine, Salt Treated, Composite, etc.), • Identify various types of ropes (Nylon, Samson, single braided, double braided, synthetic, manila etc.), • Become proficient in dry dock, railway, and travelift line handling., • Moor vessels using different types of mooring equipment (Cleats, bitts, bollard bitts, chocks, H bitt, etc.), with instruction., • Tie various knots (Barge hitch, Tow bridal)., • Operate the following equipment, completing any required training beforehand:, • Drydock equipment (Capstan, grip hoist, flood valves, discharge valves), • Forklifts, • Impact wrench, • Nail gun, • Come a long, • Industrial Planer, • Winches, • JLGs, • Small boats, Oil booms, moving floats, and Yokohamas., • Perform basic chainsaw operation (Startup, blade change, general maintenance)., • Train on emergency procedures relating to drydocks, railways, and travel lift., • Complete the maintenance tasks of dry docks and railways successfully., • Locate Stern Reference Points (SRP)., • Learn and execute introductory blueprint reading skills., • Perform rigging duties, as needed., • Complete maintenance of drydocks and railways., • Read and understand table of offsets., • Gearman (railway gear and track watch)., • Train on guiding Travel lift on and off pier as well as grade beams., • Work as deckhand and assist in hooking up tugs to vessels., • Identify all piers and berthing locations within the shipyard., • Must have 24/7 availability., • Must have at least three (3) years of maritime experience in trade., • Must have some technical training., • Must have knowledge of and ability to use hand tools and instruments associated with the Mechanic., • Must be able to work effectively with others., • Must have regular, reliable attendance., • Must be able to work independently to complete responsibilities., • Ability to obtain DBIDS preferred., • Experience operating small boats, JLG, chainsaws, and industrial planers preferred., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Job Description Company Overview: Continental Tide Defense Systems,Inc. (Continental Tide) is an industry leader, providing engineering andindustrial services to the U.S. Navy, U.S. Coast Guard, Military SealiftCommand, and other DoD organizations. At Continental Tide, we understand that agreat company culture is one where employees know their voice is heard, nomatter what their title is, and letting them grow in their role as the companydoes. We want to provide our employees with the opportunity to learn, bechallenged and be in a position where they can succeed, develop new skills, anddo things they wouldn't have the opportunity to do elsewhere. Our fast-pacedand challenging environment, employees here at Continental Tide can catapultthemselves to the top and we're looking for 'the best at what they do' to joinour team and help us grow! Job Description: Continental Tide is seeking amotivated, energetic, and experienced Engineering Technician with astrong structural background and Alteration Installation Team (AIT) leadershipexperience to support our ship modernization and sustainment projects in Norfolk,VA. This is a field-oriented leadership role ideal for a hands-on technicalprofessional experienced in the installation, modification, and repair of U.S.Navy ship structures. The successful candidate will oversee installationefforts and coordinate all aspects of structural and mechanical work duringshipboard alterations and repairs, ensuring work is performed safely,efficiently, and in compliance with Navy and contract standards. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Essential duties & responsibilities include, butare not limited to the following: \n • Serveas the structural SME and project lead for hull, mechanical and structuralrepairs projects, managing day-to-day operations onboard ships and in shipyardenvironments.\n, • Leadstructural teams in the layout, cutting, fitting, installation, and alignmentof structural components including bulkheads, deck inserts, framing, andfoundations.\n, • InterpretNAVSEA drawings, blueprints, and technical specifications to plan and executestructural work packages in compliance with 9090-310 REV H or latest version.\n, • Superviseand mentor shipfitters, mechanics, welders, and helpers to ensure qualitycraftsmanship and safe work practices.\n, • Collaboratewith Project Leads, Program Managers, Engineers, QA &QC, and customerrepresentatives to resolve issues and align project goals.\n, • Assistin tracking and report daily progress, labor hours, and material usage; assistin scheduling and forecasting work.\n, • Ensureall structural work adheres to NAVSEA Standard Items, ABS requirements, OSHAregulations, and company policies.\n, • Adhereto, maintain, and update all QA documentation OQE to include but not limited toweld maps, inspections, and post-repair testing.\n, • Identifyand mitigate project risks, support change orders, and contribute toafter-action reporting.\n, • Asrequired perform duties and responsibilities as Site Foremen as a project lead foroverall task assignment.\n, • SubmitDaily Status Reports (DSR), develop Condition Found Reports, and updateprogress utilizing Microsoft Project in POA&M (plans of action &milestone) format.\n\n Experience and Skills \n • Targetexperience of ten (10) years of experience in shipfitting or structural shiprepair, with at least three (3) years in a supervisory or lead role.\n, • Technicalexpert in shipboard structural repairs including insert installation, hullcuts, and steel fabrication.\n, • Strongunderstanding of QAWBs, OQE documentation, and structural inspection processes.\n, • Provenleadership skills in a shipboard or industrial repair environment. \n, • Eligibleto obtain a DoD Secret Security Clearance.\n, • Mustbe able to work in confined spaces, at heights, and aboard vessels. \n, • Proficientin reading and interpreting NAVSEA drawings, welding symbols, and installationspecifications.\n, • Experiencewith maintaining budgets and material.\n, • FormerU.S. Navy Hull Technician (HT) or shipyard trade certification in structuralfabrication or welding.\n, • Weldingcertifications (FCAW, SMAW, GMAW) are a plus.\n, • Experiencewith HPUs, Valves, Pumps/Motors, Hydraulic systems is a plus.\n, • Experiencesupporting NAVSEA modernization programs.\n, • Experience communicating directly with management,subcontractors, and customers regarding project cost, staffing, and scheduling.\n, • Background in preparing status reports and ensuring plansadhere to contract specifications.\n, • OSHA10 or 30 Maritime Certification.\n, • Exposureto open-air environments.\n, • Requiredto visit project sites aboard ships and rigs, both onshore and offshore.\n, • Wearvarious types of personal protective equipment (PPE), (i.e. ear plugs, safetyglasses, hard-hat, steel-toed boots, gloves) as required.\n, • Sitevisits may involve standing on a variety of surfaces and angles, bending,crouching, and climbing over obstructions such as scaffolding, ladders, andinternal barge or boat structural components.\n, • Exposureto sound levels exceeding 100 decibels.\n, • Mustpossess sufficient visual acuity, peripheral vision, depth perception, andnight vision to inspect marine components and systems, identify defects orirregularities, and safely operate tools and equipment.\n, • Maywork in confined spaces with limited ventilation.\n, • Requireprolonged periods of sedentary work, including sitting and/or standing.\n, • Maybe required to operate machinery, power tools, and/or heavy equipment.\n, • Mustbe able to communicate effectively to exchange and comprehend information.\n, • Frequentexposure to extreme weather conditions, including high heat and extreme cold.\n To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Job Benefits Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Why Join Us? At Continental Tide, we foster a culture of collaboration, innovation, and professional growth. By joining our team, you'll work on impactful projects supporting our nation's fleet, with opportunities to advance your career in a fast-paced and rewarding environment. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures. Location Portsmouth, VA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: Aluminum TIG Welder REPORTS TO: Production Superintendent SUMMARY The Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the GTAW (Gas Tungsten Arc Welding) process in all positions. This role also includes handling miscellaneous tasks as assigned by the supervisor. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Prioritize safety and adhere to quality standards during all aluminum welding operations., • Configure welding machines according to job requirements or Welding Procedure Specifications for GTAW aluminum welding., • Utilize personal basic tools and equipment for welding tasks if not provided by the workplace., • Perform aluminum welding based on the required GTAW process and parameters., • Strictly follow welding procedure specifications for GTAW aluminum welding., • Prepare and set up welding cells for serial production runs of aluminum components., • Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities., • Adhere to all company policies and rules., • Demonstrate keen attention to detail and focus on assigned tasks., • Comply with safety regulations and maintain high-quality standards., • Collaborate with team members to enhance productivity and efficiency., • Assist in preparing aluminum products for shipment., • Report any hazardous work conditions or practices to the supervisor., • Ability to understand and follow both verbal and written instructions., • A willingness to learn and display a dependable work ethic., • Knowledge of welding equipment, including proper setup and usage for aluminum GTAW welding., • Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals., • Familiarity with the metric system., • Capable of standing continuously for extended periods., • High school graduate or GED, • Six months to one-year of relevant experience and/or training in aluminum welding., • May be made to enable qualified individuals with disabilities to perform essential job functions.\n Location Portsmouth, VA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Norfolk, VA Summary: Using brazing and cutting equipment and various power and hand tools, the pipefitter performs a variety of shop and shipboard pipefitter trade functions. These functions include the repair and/or removal of old structural materials; the installation and fit up of new structural materials and complete fabrication of complex fluid system piping and piping hangers and supports. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following: Other duties may be assigned. • Apply basic pipefitting and brazing processes to join, fabricate, or repair fluid system piping and associated hangers and supports., • Proficient I bending pipe with multiple bends in a single run including 3-dimensional bends., • Qualified to braze multiple base metal and filler metal combinations., • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed., • May lay out and mark points on parts or subassemblies using rules, square, scribe or templates., • Gives recommendation to Project Manager for corrections of problems, • May position pieces be welded or brazed into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools., • Knowledge of the processes and procedures necessary for the proper removal of old equipment and piping systems with minimal damage to surrounding materials., • Maintain certification in the brazing procedure(s) as required by Quality Assurance Manager., • Performs all work in accordance with established safety procedures. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Typically requires 10+ years of related experience., • Experience working in the marine fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of brazing standards and brazing procedures., • Current brazing Certification for Cu and CuNi piping materials., • Skill to make acceptable brazes as determined by either peel test or UT test., • Read and understand blueprints and specifications.\n\n Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Knowledge, Skills and Other Abilities: • Ability to follow written and verbal instructions., • Advanced knowledge of welding tools and procedures., • Knowledge of geometry, weld shrinkage, welding techniques, and physical properties of metal.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is working on a ship. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-25-00055 This position is currently accepting applications.

Job DescriptionDescription: Days: M-F Hours of Work: Full Time - 40 Hours/Week + potential OT Relocation Required: Yes Travel Requirements: On-site Panama City FL Signing Bonus: No Salary: Negotiable based on experience Background check, secret clearance, drug screening and US Citizenship are the requirements for this position. Contingent on client approval. LABOR CATEGORY - SUMMARY Tier 4 1. Bachelor's Degree & +10 years' experience, 2. High School Diploma and 20 years' experience, 3. High School Diploma and 20 years' military experience with 6 years engineering related Tier 3 1. Bachelor's Degree & 4-10 years' experience, 2. High School Diploma & 12 years' experience, 3. High School Diploma & 20 years' military experience with 4 years engineering related Tier 2 1. Bachelor's Degree & 2 - 4 years' experience, 2. High School Diploma & 8 years' experience, 3. N/A Tier 1 1. Bachelor's Degree, 2. Bachelor's Degree, 3. Bachelor's Degree Must meet 1 of the 3 requirements The Deputy Test Manager plays a mission-critical role in ensuring the operational readiness and delivery of one of the U.S. Coast Guard’s most advanced shipbuilding programs. This position directly supports our commitment to performance, safety, schedule, and national security through disciplined test execution and leadership excellence. TMMG is seeking a dynamic and highly experienced Deputy Test Manager to lead the planning, coordination, and execution of total ship testing for the U.S. Coast Guard’s Offshore Patrol Cutter (OPC) program. This individual will serve as the ship-level authority for test operations across HM&E, C5ISR, QA, Engineering, and Production domains from Stage 2 through Acceptance and In-Service Trials.A s a key leader in the Test Department, the Deputy Test Manager will directly manage testing activities for an assigned OPC hull, driving schedule, technical excellence, procedural rigor, and alignment across multiple departments and subcontractors. This role demands a mission-focused professional with strong test engineering acumen, field leadership, and the interpersonal skills to ensure test readiness and successful delivery. Shipyard Deputy Test Manager - POSITION REQUIREMENTS AND RESPONSIBILITIES include the following. Other duties may be assigned. • Experience:, • Minimum 5 years of progressively responsible shipboard test or commissioning experience, including leadership roles., • Prior experience executing test programs for U.S. Navy, Coast Guard, or commercial maritime vessels., • Familiarity with INSURV trial card management, ABS NVR, MIL-STD documentation, and industry-standard test methodologies., • Demonstrated expertise with dock trials, propulsion testing, power-up events, fuel systems, diesel generators, and combat system integration., • Experience overseeing subcontractors and working within complex stakeholder environments., • Education:, • Bachelor’s degree in Marine Engineering, Naval Architecture, Electrical Engineering, or related technical field preferred., • Equivalent experience in U.S. Navy or commercial shipyard environment will be considered., • Technical Skills:, • Competency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)., • Ability to read and interpret ship construction drawings, system schematics, and technical manuals., • Familiarity with test tracking tools, OQE documentation, and integrated data systems., • Certifications (Preferred):, • OSHA Maritime Safety Certification, • LOTO Program Management, • Secret Security Clearance (Required or Ability to Obtain), • Work Environment:

Job Description Type: Full Time Location: Chesapeake, VA Overtime Exempt: No (SCA) Reports to: ARMADA HQ Duties & Responsibilities: • Delivery of advanced level high-risk training in many of CENSECFOR's courses of instruction requires instructors that possess highly specialized skills and experience. Tactical Weapons-based instructors deliver training in support the following courses of instruction:, • Small Arms Marksmanship Instructor (SAMI) (A-041-0148), • Antiterrorism Training Supervisor (AT TRASUP) (A-830-0034), • Security Reaction Force-Advanced (SRF-A) (A-830-0396), • Armed Sentry/Security Reaction Force-Basic (AS/SRF-B) (A-830-0018), • Non-Lethal Weapons Basic instructor (NLW-BI) (A-830-0035), • Non-Lethal Weapons Senior Instructor (NLW-SI) (A-830-0038), • Submarine Force Sentry (SUBFOR Sentry) (A-830-0028), • Master at Arms, Class A (MAA) (A-830-0011) (NTTC Lackland only) and Non-Compliant Boarding, Visit, Board, Search, and Seizure (NCB VBSS) (A-830-0395), • Have attended the Navy Instructor Training Course (NITC) (A-012-0077) (or military service equivalent), • Academic credentialing (teacher/professor), • Instructor training via an academic institution. Academic ITC requirements should contain, at a minimum, the following Learning Objectives:, • Effective communication and questioning techniques, • Adult learning theory and principles, • Instructional Delivery methods, • Lesson delivery performance laboratory, • Training environment management, • Inter-personal skills, • Possess at least two years of past military experience in a weapons-carrying and employment operational environment or equivalent experience as a Law Enforcement officer with a military or civilian security force., • Possess a basic understanding of Military/Civilian Security Force techniques., • Be qualified as a Small Arms Weapon's Instructor., • Possess a minimum of five (5) years documented armed tactical military operational experience involving:, • Basic Tactical Communications, • Small Arms (Rifle and Pistol) Employment, • Tactical Shooting, • Mission Planning, • Tactical Movement, • Defensive Tactics, • Non-lethal weapons employment, • Tactical Hostile Intent Decision Making (Shoot/Don't Shoot), • Tactical Weapons-based instructors are responsible for demonstrating modern dynamic combat shooting skills., • These instructors will deliver a wide variety of training topics, as well as providing instructional and safety support for live-fire weapons training., • In addition, all tactical weapons-based instructors must be skilled operators of pistol, rifle and shotgun, and must be and capable of achieving a "Sharpshooter" qualification score with each weapon and meet OPNAVINST 3591.1(series) qualifying scores in all applicable courses of fire., • Tactical Weapons instruction requires instructors who possess the fitness and conditioning to support the level of instruction., • Instructors shall be personally capable of performing all training evolutions including the ability to effectively complete weapons qualifications in the standing, kneeling and prone positions, ascend or descend ladders and go through narrow passageways, and be free of any abnormal fear of heights., • Additionally, Tactical Weapons-based Instructor personnel are tasked with Judgment-based Engagement Training (JET) Instruction., • JET training requires highly qualified, tactically astute instructors possessing experience, knowledge, skills and abilities required to coach students through dynamic use of force decision-making training utilizing Small-Arms Marksmanship Simulation (SAWS)., • JET training encompasses:, • Decision-making during high stress tactical situations or deadly force confrontations, • Recognizing compliant/non-compliant threat, non-compliant threat response, response using appropriate level of force, legally & tactically; understanding psycho-physiological reactions inherent in life threatening encounters, high stress tactical situations or deadly force confrontations, • Tachy-psyche (Tachypsychia) effect (Fight or Flight), increased heart rate, vasoconstriction, loss of fine motor skills or control, "Tunnel vision" (loss of peripheral vision) , auditory exclusion, time distortion (skewed perception of time or space), • Compensating techniques that mitigate psycho-physiological responses, • Stress inoculation, • Muscle memory, • Practical exercises and scenario driven interactive simulation, • Force-on-Force training w/ Simunitions.Minimum Education and Experience: The above information has been designed to indicate the general nature and level of work to be performed. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of the contractor assigned to this position. Special Notes: Relocation is not available for these jobs. ARMADA provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. ARMADA complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Must be able to successfully pass a background check, and pre-employment drug testing. Job offers are contingent upon results of background check and drug testing.

Job DescriptionThe PM (SME)/Network Engineer Senior will lead and oversee all aspects of the program. This includes full-spectrum program and project management of engineering, integration, sustainment, and modernization activities across SECRET, TOP SECRET, and SCI enclaves. The PM will manage cross-functional technical teams including network specialists, voice/data Communications engineers, logistics specialists, and property management staff while serving as the primary interface to government leadership. The PM is responsible for program performance, cost, schedule, risk, resource management, compliance, and customer satisfaction—ensuring mission readiness and excellence in execution. Job Duties • Provide strategic leadership and direction for the execution of all Performance Work Statement (PWS) elements across network, systems, security, and integration functions, • Serve as the primary Point of Contact (POC) with the Government Contracting Officer’s Representative (COR) and stakeholders, • Ensure alignment of technical execution with contract requirements, mission objectives, and evolving government priorities, • Collaborate with senior engineers and architects to guide modernization and sustainment strategies for SIPRNet, NIPRNet, JWICS, and SCI networks, • Support decision-making on architecture, cybersecurity compliance, phased deployments, and troubleshooting escalations, • Monitor and report on performance metrics across PWS subtask areas ensuring seamless integration and execution, • Lead a multi-disciplinary team of engineers, analysts, and administrators, • Assign and manage resources across up to 12 concurrent projects throughout the calendar year, • Ensure proper staffing, training, and professional development to meet evolving technical and security requirements, • Develop and maintain integrated master schedules and work breakdown structures (WBS), • Identify risks and implement mitigation strategies to prevent delays or scope creep, • Track project costs, manage budgets, and ensure accurate and timely reporting to government financial stakeholders, • Implement and maintain quality control procedures to ensure deliverables meet or exceed contract standards, • Ensure all services are provided in accordance with DoD cybersecurity regulations, STIGs, IAVA compliance, and operational SOPs, • Lead internal reviews, audits, and corrective action plans as needed, • Prepare and deliver weekly, monthly, and ad hoc status reports, briefings, and executive summaries, • Facilitate Integrated Product Teams (IPTs), working groups, and technical exchange meetings with government and contractor personnel, • Represent the program during performance evaluations, milestone reviews, and inspectionsMinimum Qualifications, • Active Top Secret with SCI, • Bachelor’s degree in Engineering, Computer Science, Business, or related field (Master’s preferred), • 8+ years of experience in program or project management within DoD/IC environments, • Demonstrated experience managing multi-enclave (SIPR, NIPR, JWICS, SCI) network/system modernization efforts, • Experience leading cross-functional teams in classified environments and overseeing technical delivery in accordance with government contracts, • Familiarity with DISA standards, DoD acquisition processes, RMF, and performance-based contractsPreferred Certifications, • PMP® (Project Management Professional), • ITIL v4 Foundations or higher, • DoD 8570 IAT or IAM Level II/III Certification (e.g., CISSP, CISM) A3T offers excellent benefits to enhance the work-life balance, including: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Short Term & Long-Term Disability, • 401k Retirement Savings Plan with Company Match, • Paid Holidays, • Paid Time Off (PTO), • Tuition and Professional Development Assistance 3KGu2KrgQU

Job Description Job Summary: We are seeking two highly motivated and experienced Project Managers to lead and manage one or more government contracts. This role is responsible for ensuring successful project execution through operational leadership, financial oversight, and consistent client engagement. The Project Manager will act as the primary point of contact for the customer and internal teams, ensuring contract requirements are met on time, within budget, and with high quality. Please note that this posting is for 2 Hybrid Openings in Norco, CA and Chesapeake, VA. As with any position, additional expectations exist. Some of these include, but are not limited to, adhering to normal working hours, meeting deadlines, following company policies as outlined by the Employee Handbook, communicating regularly with assigned supervisor(s), staying focused on the assigned tasks, and completing other tasks as assigned. Responsibilities: • Lead all aspects of project execution, including planning, scheduling, cost control, quality assurance, and customer satisfaction, • Serve as the principal interface with the customer, maintaining strong relationships and ensuring contractual obligations are met, • Monitor project performance metrics, identify trends, resolve issues, and implement process improvements to drive efficiency and results, • Oversee the preparation and timely submission of all contract deliverables and reports, • Provide strategic guidance to project teams, ensuring alignment with business goals and customer expectations, • Ensure compliance with all applicable regulations, policies, and procedures, • Direct and support the work of subcontractors, ensuring quality and timely delivery of work products, • Manage the recruitment, training, mentorship, and performance evaluations of assigned staff, • Foster a high-performing, collaborative team environment while promoting continuous improvement and professional development, • Maintain deep understanding of company services and offerings to support organic growth and new business capture, • Assist with proposal development, staffing strategies, and solutioning efforts for future contract pursuits Basic Qualifications: • If applicable: If you are or have been recently employed by the U.S. government, a post-employment ethics letter will be required if employment with VSolvit is offered, • Bachelor’s degree in Business Administration, Project Management, Engineering, or related field, • 5+ years of experience managing projects or programs, including at least 3 years managing federal government contracts, • Proven experience with cost control, schedule management, and contract compliance, • Strong leadership, communication, and organizational skills, • Proficiency in project management tools (e.g., Microsoft Project, Jira, or similar), • U.S. Citizenship Required, • Active DoD Secret Clearance or higher, • Experience managing subcontractors and multi-vendor teams, • Familiarity with FAR/DFARS and other federal contracting regulations, • Experience working with DoD or other defense agencies, • Strong analytical skills and experience implementing process improvements Join the VSolvit Team! Founded in 2006, VSolvit (pronounced 'We Solve It') is a technology services provider that specializes in cybersecurity, cloud computing, geographic information systems (GIS), business intelligence (BI) systems, data warehousing, engineering services, and custom database and application development. VSolvit is an award winning WOSB, CA CDB, MBE, WBE, and CMMI Level 3 certified company. We offer a customizable health benefits program that best meets the needs of its employees. Offering may include: medical, dental, and vision insurance, life insurance, long and short-term disability and other insurance products, Health Savings Account, Flexible Spending Account, 401K Retirement Plan options, Tuition Reimbursement, and assorted voluntary benefits. Our goal is to grow together and enjoy the work that we do as a team. VSolvit LLC is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Job Description Imagine One is currently seeking a Senior Project Manager with demonstrated experience in leading and coaching large-scale Agile transformations using the Scaled Agile Framework (SAFe). The ideal candidate will be a SAFe Program Consultant (SPC) and/or PMP-certified and possess extensive experience with Lean-Agile practices and methodologies. This role requires a leader who is effective at engaging cross-functional teams, guiding organizational agility, and working directly with executive leadership to ensure program alignment, transparency, and delivery excellence. This position is "contingent” on award of the associated work to the Imagine One Team. This position supports the U.S. Navy, Norfolk, Virginia. Key Responsibilities: • Lead and coach enterprise-level Lean Agile Centers of Excellence (LACE) to foster consistent Agile practices and behaviors., • Facilitate Product Increment (PI) Planning sessions across Agile Release Trains (ART)., • Lead the stand-up, coaching, and synchronization of multiple Agile Release Trains (ARTs), including Scrum of Scrums and ART sync meetings., • Mentor and coach Scrum Masters and Agile teams across the organization., • Manage and lead a supportive and/or controlling Project Management Office (PMO) in line with organizational goals., • Ensure adherence to standardized project forms, methodologies, and training practices., • Develop and peer-review monthly status reports, deliverables, and progress assessments., • Define and update the PMO’s mission and objectives, in alignment with organizational strategy., • Develop and manage project charters, ensuring alignment with scope, schedule, and resource planning., • Facilitate and coordinate meetings with senior leadership, providing concise briefings and strategic updates., • Prepare and present program review materials to internal and external stakeholders, including customers., • Conduct regular team touchpoints and yearly performance evaluations, fostering high-performance team culture. Required Qualifications: • SAFe Program Consultant (SPC) Certification, • Project Management Professional (PMP) Certification, • Agile Certification (e.g., PMI-ACP, ICAgile, or equivalent), • Proven experience teaching, coaching, and implementing the Scaled Agile Framework (SAFe), • 10+ years of progressive experience in project/program management, • Experience leading Agile transformations and managing Agile Release Trains (ART), • Experience with PI Planning, Scrum of Scrums, and other Agile ceremonies at scale, • Strong background leading PMO organizations, including creating processes, standards, and reporting frameworks, • Excellent communication skills – verbal, written, and presentation – with proven ability to brief senior leadership and executive stakeholders, • Experience developing project charters and PMO strategy documentation, • Ability to develop visually compelling presentations and program reports Preferred Skills: • Prior experience in federal, defense, or large enterprise environments, • Experience with Agile tools such as Jira, Rally, ADO, or VersionOne, • Familiarity with government or DoD contracting and program oversight Educational Requirements: • Master’s Degree preferred in an IT field preferred. Bachelor’s Degree will be substituted for additional years of experience. Security Requirements: • U.S. Citizenship required., • Candidate must have an ACTIVE SECRET clearance Imagine One Technology & Management, Ltd., offers a full package of benefits and competitive salary, excellent group medical, vision, and dental programs. 401K savings plan; $4K annual tuition reimbursement ($5K if pursuing master’s degree); employee training, development, and education programs; profit sharing; advancement opportunities; and much more! ISO 9001:2015, ISO 20000-1:2018, ISO 27001:2013 CMMI Development and Services - Maturity Level 3 An Employee-Owned Business EEO/Veterans/Disabled

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description GENERAL SUMMARY: Proficient in fit up, brazing, assembly, and installation of piping systems and components onboard US Naval submarines and ships as well as off hull fabrication efforts. LOCATION:Norfolk, VA. DUTIES/RESPONSIBILITIES: • Performs shipboard fit up, brazing, and assembly of piping systems and components in support of installation, repair, and maintenance efforts., • Performs fit up, brazing, and assembly in support of off hull fabrication efforts., • Responsible for layout, templating, and targeting piping for both brazing and welding applications., • Assists welders and mechanics with fit up and/or installation of piping, structural, and mechanical components., • Performs fit up, brazing, assembly, installation, repair, and maintenance in accordance with Technical Work Documents (e.g. QAWBs, Maintenance Standards, & Technical Manuals) and associated drawings., • Responsible for documenting requisite inspections, brazing, and mechanical joint assembly efforts in both the Technical Work Document and on associated Objective Quality Evidence Forms., • Responsible for selection and control of brazing filler material, joint design, and brazing rig setup in accordance with the Technical Work Document and company Quality Assurance Procedures., • Expected to work well both independently and in a team setting., • Minimum of 5 years of experience in performing brazing operations, fit up, and assembly of piping systems in support of installation, repair, and overhaul efforts on US Naval vessels; or completion of a formal related course of study through either a community college, technical or trade school, military training, formal company training program, or an apprenticeship program., • Proficient in performing both Face Fed and Insert Ring brazing operations for Grade III, IV, and V alloys., • Proficient in performing pipe bending utilizing hand, mechanical, and pneumatic pipe benders for completing 3D and 5D pipe bends., • Experience with performing setup, operation, and adjustment of brazing rig (e.g. torch, lines, bottles, gauges, flowmeter) and associated hand/power tools., • Submarine experience and experience with SUBSAFE, DSS-SOC, and/or LEVEL I systems and components is preferred., • Experience working in shipyards and ship repair environments., • Must possess the ability to read, understand, and interpret Technical Work Documents and drawings., • Must possess understanding and working knowledge of the basic math (e.g. geometry, addition, subtraction) required for bending, targeting, and installing piping systems and components., • While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear., • Frequently the employee is required to carry objects that might weigh up to 50 pounds., • High School Diploma or GED equivalency is required., • Prospective employees must be a US Citizen and capable of passing both a Criminal Background Check and a Drug Screen., • Current SECRET Level Security Clearance is required.\n EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-24-00006 This position is currently accepting applications.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Norfolk, VA Summary: Using brazing and cutting equipment and various power and hand tools, the pipefitter performs a variety of shop and shipboard pipefitter trade functions. These functions include the repair and/or removal of old structural materials; the installation and fit up of new structural materials and complete fabrication of complex fluid system piping and piping hangers and supports. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following: Other duties may be assigned. • Apply basic pipefitting and brazing processes to join, fabricate, or repair fluid system piping and associated hangers and supports., • Proficient I bending pipe with multiple bends in a single run including 3-dimensional bends., • Qualified to braze multiple base metal and filler metal combinations., • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed., • May lay out and mark points on parts or subassemblies using rules, square, scribe or templates., • May position pieces be welded or brazed into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools., • Knowledge of the processes and procedures necessary for the proper removal of old equipment and piping systems with minimal damage to surrounding materials., • Maintain certification in the brazing procedure(s) as required by Quality Assurance Manager., • Performs all work in accordance with established safety procedures., • Participates in special projects as required.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Typically requires 5-10 years of related experience., • Experience working in the marine fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of brazing standards and brazing procedures., • Current brazing Certification for Cu and CuNi piping materials., • Skill to make acceptable brazes as determined by either peel test or UT test., • Read and understand blueprints and specifications.\n\n Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Knowledge, Skills and Other Abilities: • Ability to follow written and verbal instructions., • Advanced knowledge of welding tools and procedures., • Knowledge of geometry, weld shrinkage, welding techniques, and physical properties of metal.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is working on a ship. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number SKI-25-00053 This position is currently accepting applications.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Ensure welding program support for the Programs Department is in compliance with all safety, quality, technical and housekeeping standards. Direct and coordinate welding performance qualifications to meet production efforts. Assist in resolving technical questions and issues associated with welding operations. Provide mentorship and training to welders assigned to projects in execution of work. Interface with customers to ensure satisfaction. Frequent travel and overtime will likely be required. Strong analytical and personnel management skills required. Duties And Responsibilities \n • Coordinate the welding performance qualifications for production welders. Guide welding personnel in the proper welding technique during initial qualification if needed. Facilitate the proper NDT inspections of weld coupons in accordance with applicable specifications. Develop, maintain, and administer written tests to welding personnel. Control all records for initial performance qualifications and quarterly maintenance of qualification. \n, • Assist with developing new welding procedure qualification test reports and welding procedures in accordance with applicable specifications to support production efforts. Facilitate the proper NDT inspections of procedure and performance weld coupons. Assist in reviewing and revising welding procedures as necessary to support production work. \n, • Ensure economy and accountability in the expenditure of man-hours and material, to include shop fabrication requests. Assist with maintaining departmental inventory of materials, consumables and tools. Assit with ordering materials, consumables and tools as needed.\n, • Recommend and/or make improvements in machinery, equipment or production methods.\n, • Establish and/or enforce any safety procedures and regulations as required to ensure safety of production personnel. Maintain adherence to good housekeeping practices and safety guidelines in accordance with OII-MSD Safety Training Observation Program (STOP).\n, • Assist with welding technical advice and interpretation of drawings, schematics, MIL-STDs, SUBSAFE requirements, production processes, etc., to production personnel.\n, • Working with the Tool Room, ensure all welding equipment issued to production personnel is safe and properly maintained. \n, • Assist with welding problems and/or conditions for production personnel for local and forward work sites.\n, • Attend Fact Finding Critiques when required to identify unsatisfactory work processes in accordance with MSD PI-60.\n, • Perform audit/surveillance observations and oversee welding operations at OII-MSD work locations and other work locations to include subcontractors. \n, • Review subcontractor welding and workmanship procedures to ensure compliance with all fabrication documents.\n, • Assist subcontractors with challenging tasks regarding welding efforts and provide solutions during production welding to include weld sequencing, fixturing, joint preparation, etc. \n, • Travel to different work locations to assist with performing critical/difficult weld joints and mentor junior welders where needed.\n, • Minimum ten years of hands-on experience in welding.\n, • Foreman Naval and/or Commercial Shipyard with extensive Apprenticeship Program; or High School/GED with Apprenticeship Diploma and additional mechanical vocational courses; or\n, • High School/GED with extensive military training and experience in welding operations. \n, • Minimum three years leadership / supervisory experience in submarine and/or ship repair preferred. \n, • Ability to communicate and interface effectively with personnel within and outside the organization.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night\n, • Frequently working on or near moving equipment and vibrating equipment\n, • When outdoors, humidity is frequently above 90%\n, • Noise is over 85 decibels\n, • Light is intense/glare\n, • Occasional exposure to open fire/flames/sparks\n, • Frequent exposure to airborne dust, fumes, and gases\n, • Includes exposure to contaminants\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable\n, • Job tasks are performed in close physical proximity to other people\n OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary We are seeking a detail-oriented and highly organized Production Controller to support a dynamic manufacturing facility that produces complex, mission-critical components for both submarine new construction and submarine overhaul programs. This role is vital in ensuring timely, efficient, and coordinated execution of manufacturing activities across multiple high-priority defense projects. The Production Controller will be responsible for production planning, job tracking, coordination of shop floor activities, and oversight of the Manufacturing Work Request Form (MWRF) process - the formal mechanism used by overhaul project teams to initiate manufacturing support for submarine refit and maintenance work. The Production Controller's primary responsibility is maintenance, review, tracking, and preparation for certification of Task Group Instructions, Condition Reports, MWRF's and all other technical work documents. He/she will assist the Production and Manufacturing Project Manager(s) with varieties of details associated with materials, schedules, and resource availability. Interface with Project Managers, Supervisors, Craftsmen, NDT inspectors, Quality Assurance and other departments and organizations as required to support assigned projects. Interface will involve obtaining and providing information on matters of importance to the assigned Project Manager(s) and Production Manager. Duties And Responsibilities The Production Controller (PC) reports directly to the OII-MSD Production Manager (PM) for the performance of his/her responsibilities, or in the absence of the PM, an individual designated by the Production Manager. These responsibilities include but are not limited to the following: \n • Production Coordination:\n, • Manage and schedule work orders to support both new construction and overhaul programs.\n, • Monitor work-in-progress (WIP), resolve workflow bottlenecks, and ensure timely completion of manufacturing tasks.\n, • Interface daily with manufacturing, engineering, quality assurance, and supply chain teams to maintain alignment across departments.\n, • Troubleshoot and resolve production and technical issues.\n, • Collaborate with cross-functional teams to secure cooperation and approval for actions and solutions.\n, • Interpret production processes and job-related information for team members.\n, • MWRF Process Management:\n, • Serve as the central point of contact for all Manufacturing Work Request Forms (MWRFs) initiated by submarine overhaul, DDS, and New Construction Project teams.\n, • Review MWRFs for accuracy, completeness, and priority alignment.\n, • Coordinate with WFE, planning, SCM, and manufacturing leads to translate MWRFs into actionable work orders and ensure scheduling within production workflows.\n, • Project Support:\n, • Track and report production status, material availability, and shop priorities to project stakeholders.\n, • Support the timely fabrication and delivery of components critical to overhaul, DDS, and new construction schedules.\n, • Work with project managers and project engineers to communicate delays or issues and help develop mitigation strategies.\n, • Assist with preparing and reviewing quotations.\n, • Coordinate manufacturing schedules with Project Managers to optimize machine and personnel utilization.\n, • Drive and support process improvements to enhance efficiency in both the machine shop and fabrication shop.\n, • Attend Project meetings as required to provide input or updates\n, • Documentation & Compliance:\n, • Maintain accurate documentation and ensure compliance with internal procedures, and quality standards.\n, • Contribute to continuous improvement initiatives and process documentation refinement.\n, • Have a basic understanding of U.S. Navy's Joint Fleet Maintenance Manual, NAVSEA Standard Items, and the SUBSAFE program.\n\n Other Duties Assigned: • High School/GED and additional administrative vocational courses.\n, • Minimum eight years working in a manufacturing environment.\n, • Personal computer literacy and familiarity with the Microsoft Office Suite.\n, • Effectively communicate with personnel within the company.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DDS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary The Quality Engineer is a key contributor to advancing our Quality Management System (QMS), bringing expertise in quality management and manufacturing processes to drive continuous improvements. This role focuses on developing and implementing quality assurance processes that proactively prevent issues and ensure our products meet the highest standards-delivered on time and within budget. As a subject matter expert, the Quality Engineer confidently navigates complex situations, making impactful decisions and setting a standard for quality practices. This position also plays an essential role in promoting a culture of excellence by mentoring team members, fostering effective cross-departmental communication, and leading continuous improvement efforts across the organization. Duties And Responsibilities QUALITY SYSTEM DEVELOPMENT & IMPROVEMENT: • Independently develop and implement quality procedures and plans that meet and exceed customer requirements., • Lead quality improvement initiatives by evaluating processes, identifying areas for enhancement, and implementing effective solutions. QUALITY ANALYSIS & CORRECTIVE ACTIONS: • Conduct in-depth investigations of quality failures, identify root causes, and establish corrective and preventive actions., • Analyze complex quality data to identify trends and drive continuous improvement, supporting compliance with quality standards and regulations. LEADERSHIP & TRAINING: • Educate and mentor employees on QMS requirements, processes, and best practices, fostering a culture of continuous improvement., • Lead Process Failure Mode Effects Analysis (PFMEA) and root cause analysis for critical quality issues, ensuring that corrective actions are effective and preventative. CUSTOMER & SUPPLIER COLLABORATION: • Collaborate with suppliers, supply chain, and program management to manage supplier performance and ensure customer satisfaction., • Address customer feedback proactively by creating action plans for improvement and provide technical input in bids and proposals to confirm alignment with customer needs. PERFORMANCE MONITORING & IMPROVEMENT: • Develop inspection and test plans, conduct compliance audits, and resolve identified findings and risks independently., • Utilize advanced metrology and statistical techniques to analyze data, enhance performance, and reduce the Cost of Poor Quality (COPQ). CHANGE MANAGEMENT & QUALITY CULTURE DEVELOPMENT: • Serve as a change agent by applying Quality Assurance methods to cultivate a strong quality culture within the organization., • Leverage a deep understanding of human factors and motivational strategies to drive quality outcomes and inspire team members in adopting quality initiatives. Qualifications REQUIRED • Bachelor's degree in engineering or a related field (relevant experience may be considered in lieu of a degree)., • 7 years of experience in Quality, with a background in product manufacturing and hands-on quality management. PREFERRED • Certifications and applied experience in Lean and Six Sigma methodologies., • Proficiency with ERP systems, PLM/ePDM systems, and Microsoft Office Suite for daily tasks. SECURITY CLEARANCE: • Must have a Secret Security Clearance issued by the U.S. Department of Defense. CITIZENSHIP: • Must be a U.S. citizen who is not a dual citizen of any other country. Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Join our team as a Project Engineer (PE) and take the lead on exciting, large-scale projects that challenge your technical expertise and leadership skills. As a key member of our engineering department, you'll work closely with the Chief Engineer and Project Manager to define and manage the resources, schedule, and costs for our cutting-edge projects. Collaborating with diverse teams across our organization, including QA, Manufacturing, Purchasing, Shipping and Receiving, you'll provide crucial engineering support throughout the manufacturing, integration, and testing phases. With your guidance, our engineering team will deliver high-quality solutions from initial concept to successful completion, ensuring project and production availability align with customer specifications. If you're ready to drive innovation and make a tangible impact within a collaborative environment, apply now. EXPECTATIONS: \n • Self-motivated, focused individual with strong attention to detail and high ethical standards. \n, • Capable of developing and leading a small engineering team through a complex submarine overhaul.\n, • Ability to read and interpret blue prints, applicable submarine specifications and Special Emphasis Program requirements. \n, • Ability to work as part of a team of managers and technical personnel and support multiple projects. \n, • Strong organizational skills and analytical / logical approach. \n, • Ability to synthesize diverse information (technical, schedule) and exercise good judgment.\n, • Independently performs difficult engineering tasks to completion that may include a variety of complex features, conflicting design requirements, unusual materials requirements, and the need to coordinate the work of others.\n, • Excellent technical judgment, and appreciable independent evaluation, creativity, and latitude in making decisions are expected.\n, • Demonstrates ability to devise innovative solutions to problems.\n, • Develops objectives, schedules, and estimates for difficult assignments.\n, • Directs and supervises the activities of small to moderate size teams of engineers and tech writers\n, • Reviews progress and evaluates results of work accomplished by self and others.\n, • Interacts with customer technical representatives to define and manage customer expectations.\n, • Uses team management skills to lead the design or production engineering group during various phases of a project or availability.\n, • Reviews Engineering Work Packages (e.g. TGIs) related to project.\n, • Assist in Bid and Proposal efforts including cost estimating, technical approach definition, and input to baseline schedule data.\n EDUCATION: • Minimum 5 years engineering experience in complex systems design, manufacturing, and integration environment. Knowledge related to submarine structural fabrication and welding requirements such as NAVSEA Tech Pub 1688, 278, or 248 and the NAVSEA URO/MRC program desired.\n, • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work.\n, • Demonstrated ability to lead technical groups. \n, • Excellent communications and organizational skills.\n, • Demonstrated knowledge of military, and commercial, construction and material specifications applicable to Submarine and Deep Submergence System work.\n, • Possesses and applies an advanced knowledge of engineering principles and practices in one or more engineering fields.\n, • Has provided field support in engineering capacity.\n, • Candidate will have to perform in an ISO-9000 rated company in a rapidly changing and demanding atmosphere.\n, • Must be able to obtain a U.S. DoD Secret Security Clearance.\n, • Must be a U.S. citizen who is not a dual citizen of any other country.\n, • Must be willing to travel up to 25%.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DDS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary In this role, you will be a pivotal member ensuring Nondestructive Testing (NDT) inspections align seamlessly with customer directives and industry standards. As a qualified professional, you'll play a crucial role in setting up and calibrating equipment, interpreting results, and guiding NDT trainees. Your proficiency in organizing and reporting inspection results, coupled with adherence to quality processes, is key. Embrace the opportunity to work collaboratively in a dynamic Tiger Team environment, showcasing your strong analytical skills. Travel and overtime may be required, but the impact you make will be instrumental in Oceaneering's success. Duties And Responsibilities The NDT Level II Inspector is responsible for conducting non-destructive testing in compliance with industry standards. The inspector must be qualified in and perform the following tasks: Equipment Setup and Calibration: • Accurately interpret and evaluate NDT results according to codes and standards.\n, • Organize and report inspection results effectively.\n, • Use methods such as:\n, • Visual Inspection (VT)\n, • Dye Penetrant Inspection (PT)\n, • Magnetic Particle Inspection (MT)\n EXPERIENCE AND EDUCATION: \n • High School/GED education at a minimum.\n, • Previous Military or industrial training/qualification/certification/experience must be documented to meet Level II requirements.\n, • As an option, this individual may have been a NDT Level I or NDT Trainee at OII-MSD to meet previous training/qualification/experience requirements.\n, • At a minimum, this individual will be certified, able to work independently, and proficient in the following methods: VT, MT, PT, UT Shear Wave\n\n, • Additional certifications of other NDT methods preferred, i.e. RT, ET\n, • NBPL certification a plus.\n, • Technical knowledge with submarine and/or surface combat ships recommended.\n Applicants are encouraged to include electronic copies of their Level II NDT certifications in Visual Testing (VT), Magnetic Particle Testing (MT), Penetrant Testing (PT), and Ultrasonic Testing Shear Wave (UT) as part of their initial application. Certifications can be from industry, trade school, military, or other relevant sources. If these documents are not included with your application, they will be requested if you are selected for an initial phone screening with our recruiting team. Before scheduling an interview with the hiring team, candidates will need to provide: \n • Proof of NDT certification(s)\n WORKING CONDITIONS This position is considered PRODUCTION/OUTDOOR WORK which is characterized as follows. The shipyard/base/manufacturing work environment; the site may contain mobility barriers with uneven ground level and obstructed pathways. Climatic and environmental conditions at the job site will be indoor/outdoor climate with various temperatures and noise levels caused by tools, machinery, equipment, and etc. PHYSICAL ACTIVITY/REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL \n • Lift 20-50 pounds\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences\n, • Lift 10-25 pounds\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead\n, • Lift up to 10 pounds\n All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: Pipe Welder REPORTS TO: Production Superintendent SUMMARY The Pipe Welders are responsible for accomplishing work in accordance with work specifications safely, with the highest quality and in a professional manner. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Prioritize safety and adhere to quality standards during all pipe welding operations., • Configure welding machines according to job requirements or Welding Procedure Specifications for GTAW/SMAW Pipe welding., • Utilize personal basic tools and equipment for welding tasks if not provided by the workplace., • Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities., • Adhere to all company policies and rules., • Demonstrate keen attention to detail and focus on assigned tasks., • Comply with safety regulations and maintain high-quality standards., • Collaborate with team members to enhance productivity and efficiency., • Assist in preparing pipe products for shipment., • Report any hazardous work conditions or practices to the supervisor., • Ability to understand and follow both verbal and written instructions., • Have a working knowledge and understanding of welding standards, such as Tech-Pub-278, Tech-Pub-248, MIL-STD-1689 and proper joint designs IAW MIL-STD-22D., • Have the ability to weld all types of materials, to tig and stick, weld plate, pipe including piping joints such as sockets, butts, consumable rings, backing rings and open butts., • Have experience with various metals such as cuni, monel, stainless steel, alum, and carbon steel., • Be able to weld with the use of a mag-base mirror for tig and stick., • Be able to trouble shoot problems with tig lines and machines., • Pipe testing will be in restricted positions., • A willingness to learn and display a dependable work ethic., • Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals., • Familiarity with the metric system., • Capable of standing continuously for extended periods., • High school graduate or GED, • Six months to one-year of relevant experience and/or training in aluminum welding., • May be made to enable qualified individuals with disabilities to perform essential job functions.\n Location Portsmouth, VA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Job DescriptionDescription: Summary: The Program Manager shall directly contribute to program efforts in several areas, including cost management/avoidance, schedule estimation and tracking, contract performance management, risk management, requirements analysis, and quality assurance activities. Ensures proper performance of tasks necessary to ensure the most efficient and effective execution of the contract. The PM shall utilize expert communication skills needed to direct the skilled technical resources and report on the progress, issues, and problem areas, as well as write and review program and contractual documents. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Responsible for the overall management of service jobs involving the maintenance and repair of Isotta Fraschini Motori marine engines installed on various customer vessels. Projects typically will serve Littoral Combat Ship (LCS), Expeditionary Fast Transport (EPF), Mine Counter Measures (MCM), and USCG buoy tender programs., • Accountable for controlling and reporting cost, schedule, and performance of assigned service jobs to ensure the operations teams achieve and comply with contract requirements., • Indirectly manage and extensively communicate with the operations team to ensure coordinated job performance and availability of manpower and supplies. Routinely use project schedules and data (analysis reports) as communication tools., • Serve as the customer’s primary contact for all contractual and business matters pertaining to service jobs. This includes, but is not limited to, preparing quotations, and negotiating contracts and purchase orders to define scope of work, schedule, deliverables, requirements and price., • Champion process changes to continuously improve the productivity and efficiency of operations., • Routinely monitor specific job and overall business performance by deriving and reporting key performance indicators (KPIs); use KPIs to drive operational changes and continuously improve., • Securely organize and maintain project documents, including records of contracts and evidence of customer deliverables. Communication – Shares information in an effective and collaborative manner. Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures. Ability to multitask several projects at any given time. Ability to prioritize work flow to ensure timely completion. Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions using a holistic business approach; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Leadership - Exhibits confidence in self and others; Inspires and motivates others to perform well; effectively influences actions and opinions of others; Accepts feedback from others; Gives appropriate recognition to others. Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness. Business Acumen - Understands business implications of decisions; Displays orientation to profitability; Demonstrates knowledge of market and competition; Aligns work with strategic goals. Cost Consciousness - Works within approved budget; Develops and implements cost saving measures; Contributes to profits and revenue; Conserves organizational resources. Diversity - Shows respect and sensitivity for cultural differences; educates others on the value of diversity; promotes a harassment-free environment; Builds a diverse workforce. Ethics - Works with integrity and ethically; upholds organizational values. Requirements: Qualifications • Bachelor’s Degree in Science Discipline or Engineering, • Five or more years of professional experience in a program or project management role (one involving engines or power systems equipment preferred), • Project Management Professional (PMP) certification preferred, • Awareness level knowledge of engine maintenance and repair activities including familiarity with spare parts and related equipment, • Ability to read, analyze, and interpret technical procedures, or governmental regulations., • Ability to write reports, business correspondence, and procedure manuals., • Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Working knowledge of Project Management software; MS Word and MS Excel., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job., • The noise level in the work environment is usually moderate. Fincantieri Marine Systems is an equal opportunity employer and is committed to providing equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. We are proud to be a company that values diversity and inclusion in the workplace. Fincantieri Marine Systems also takes affirmative action to employ and advance in employment individuals from historically underrepresented groups, including women, minorities, individuals with disabilities, and protected veterans. We encourage all qualified candidates to apply and join our team in supporting innovation, integrity, and excellence in the maritime industry.

Job DescriptionSummary: Under the supervision of the Child Care Lead Teacher, assist in providing a learning environment at the newly built child development center that uses developmentally appropriate practices, ensures the health and safety of each child and staff, and offers resources and support to families. Salary commensurate with experience ($19.95- 25.20 Per hour) Duties and Responsibilities: Developmentally Appropriate Practice • Participate in the on-going assessments of children including completing observations, portfolio sampling, and developmental checklists., • Support each child's individual learning and development by providing an environment offering developmentally appropriate equipment and materials., • Be inclusive of children with disabilities by following the child’s Individual Education Plan (IEP) or the Individual Family Service Plan (IFSP)., • Assist with the implementation of a daily program which balances adult and child-initiated activities in both large and small groups, indoor and outdoor play, and timely and predictable transitions., • Collaborate with the lead teacher to develop and implement lesson plans based on ELM curriculum., • Provide opportunities for creative self-expression through art, music, movement, and dramatic play., • Support the social and emotional development of each child by building trust, fostering independence, encouraging self-confidence, and supporting positive adult and peer relationships., • Encourage positive guidance by setting clear, consistent limits, and having realistic expectations., • Practice and model the sanitation and hygiene procedures which include but are not limited to hand washing, the cleaning and disinfecting of toys and furniture, and providing children with space to place personal belongings., • Comply with policies regarding blood borne pathogens to adequately protect children and staff., • Assist lead teacher with maintaining accurate emergency contact information., • Follow the policies regarding temporary exclusion and physician notification of diagnosis., • Practice the policies regarding medication administration and storage., • Provide an indoor and outdoor environment supervised in accordance with Child Care Administration licensing regulations and free of environmental and physical hazards., • Comply with the agencies approved Child Abuse and Neglect Reporting policy., • Complete daily attendance records when requested by the Child Care Lead Teacher or in their absence., • Respond to emergency situations by implementing emergency preparedness procedures., • Assist in the nutritional aspects of the program by assisting children with “family style” meals, sitting with children during designated mealtimes, and appropriately scheduling meals into the daily schedule., • Serve all food that is on the planned menu, unless directed otherwise., • Serve purchased food replacements for children with specific and physician documented dietary needs.Staff and Parent Responsibilities, • Follow the ELM curriculum., • Assist the lead teacher in making timely requisitions for health, safety, and classroom supplies., • Provide adequate coverage in your absence for all approved leave, which includes personal days and advanced scheduled sick leave., • Attending all scheduled staff development days and any additional training sessions., • Attending all staff meetings., • Invite parents to become an integral part of the program., • Assist the childcare lead teacher in completing two parent and teacher conferences throughout the year., • Assist parents with transitioning from one classroom to another or from the Child Development Center to kindergarten., • Communicate with parents regularly, verbally and non-verbally., • Assist with the preparation of home learning activities., • Communicate in a professional and respectful manner with parents and guardians., • Perform other duties as assigned.Conditions of Employment, • Must be 18 years of age or older., • Must have a high school diploma or GED., • Must have all required education and experience to meet current Virginia State licensing requirements for qualifications., • Must have knowledge of childcare regulations., • Must participate in continued professional development through enrollment in formal and informal educational courses related to early childhood education., • Must satisfactorily obtain or complete required training certificates and maintain certifications or credentials required by federal, state or National Accreditation institutions as used by the CDC., • Must pass Federal, State, Child Protective Services Checks, National Sex Offender Registry and if living out of the State of Virginia in the last 5 years all applicable Out if State checks applicable., • Must pass a pre-employment physical, provide evidence of immunization, be free of all communicable diseases, and obtain appropriate immunization against communicable diseases., • Must be familiar with accreditation standards., • Preferred to have experience with military families and their children Compensation and Benefits: • Sign-on Bonus: Eligible candidates will receive a $500 sign-on bonus upon hire., • Retention Bonus: Earn up to $1750 in retention bonuses, distributed over key employment milestones as part of our commitment to employee satisfaction an longevity. Armed Service YMCA is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. ASYMCA is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, family or parental status, or any other status protected by the laws of regulations in the locations where we operate. We will not tolerate discrimination or harassment based on any of these characteristics. ASYMCA encourages applicants of all ages. Military spouses, veterans and military affiliated job seekers encouraged to apply. Armed Services YMCA is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. ASYMCA is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. We will not tolerate discrimination or harassment based on any of these characteristics. ASYMCA encourages applicants of all ages. Armed Services YMCA acknowledges the minimal use of artificial intelligence (AI) technology in our initial recruitment stages. All AI use is coupled with human review and is designed to assist our team in building efficiencies and excelling at focusing on timeliness and communication in our hiring process. Our hiring teams thoroughly evaluate skills and qualifications and make all final hiring decisions. Powered by JazzHR YUc71bfdwX

Job Description STAFF OFFICER MILITARY PARTNERSHIPS - Partnerships Strategy & Policy DEFTEC delivers mission-critical solutions through skillfully delivered services and innovative products. We are inspired by our clients' critical missions and driven to provide the most effective solutions to execute their missions, operational challenges, and requirements. Our dedicated, experienced, and talented employees work closely with our clients to ensure the delivery of exceptional services and products. POSITION OVERVIEW This position contributes to the activities of the Partnerships IPT/Branch by supporting daily operations, initiatives, and long-term objectives. Responsibilities include developing and delivering briefings to senior officers and decision makers on partnership-related matters; assisting in the formulation of policies, directives, and process improvements; and ensuring effective coordination across stakeholders. The role also provides direct support to the Head of the Partnerships IPT/Branch and requires periodic travel-up to 30 days per year-to participate in meetings, conferences, and engagements both within and outside NATO boundaries. JOB RESPONSIBILITIES: • Contribute to the drafting of policies, reports and studies on the longer-term perspectives of NATO military partnerships, and on their interaction with NATO's defence policies and cooperative programmes., • Through the analysis and assessment of information received across NATO Enterprise on best practice and lessons learned on partnerships issues, contribute to the further development of related NATO concepts, policies and procedures, including Bi-Sc and ACT directives, • Identify, within portfolio, ACT Programmes of Work (PoW) that could be opportunities for partners engagement, and partner countries that could contribute to ACT PoW., • Provide geopolitical analysis and Key Leader Engagement on PfP countries. Perform the Action Officer (AO) role and/or provide inputs for PfP country related Bi-SC tasks., • Develop processes to implement corporate memory mechanisms for partnerships (including synthesis, documentation, traceability, change management, etc.). This will include providing a quality assurance service with regards to partnerships development activities and to contracting activities across the branch., • University postgraduate degree (master's or higher) in international relations, international security, international development, military studies (including military technology or operations research), foreign policy, public affairs, political science, or related discipline; or have attended a NATO or national military staff college (OF-3 level or higher), • Experience working in the field of foreign/international security/international cooperation/defence/military affairs, • Experience working within NATO Enterprise (preferred); or other International Organization (in a defence or Security-related position); or within a national mission, delegation, or embassy to an IO (in a Defence or Security-related position), • Demonstrate a working knowledge of: NATO Partnerships; or security sector reform / defence and security capacity building; or defence planning; or military capability development / military applications of operations Research. DEFTEC offers a comprehensive whole-life benefits package that includes medical, dental, vision, holiday, paid time off, 401K with a match, life insurance, short/long-term disability, and educational reimbursement. The DEFTEC team comprises professionals who make a difference daily in crucial national security missions. Our leadership knows that this happens by employing a diverse team that is well cared for. Our top priority is our employees, making DEFTEC an ideal workplace. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Please get in touch with if you require reasonable accommodations. DEFTEC is a Drug-Free Workplace where post-offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies. AAP/EEO Statement DEFTEC Corp is an Equal Opportunity and Affirmative Action Employer and prohibits discrimination and harassment of any type based on actual or perceived race, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth or breastfeeding), gender, gender identity, and gender expression, religious creed, disability (mental and physical) including HIV and AIDS, medical condition (cancer and genetic characteristics ), genetic information, age, marital status, civil union status, sexual orientation, military and veteran status, denial of family and medical care leave, arrest record and/or any other characteristic(s) protected by federal, state or local law. This policy applies to all terms of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, training, compensation, benefits, employee activities, and general treatment during employment. Other Duties Please note that this job description is not designed to cover or contain a comprehensive listing of the activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. Job Posted by ApplicantPro

Job Description Gates of West Bay Apartments The Service Manager/Maintenance Superintendent is responsible for the physical upkeep of the community and is under the direction of the Property Manager. He or she must maintain and operate all mechanical equipment and supervise all maintenance employees. The Service Manager will be responsible for maintaining both properties. Essential Duties and Responsibilities include the following • Train and be responsible for work performed by all staff members under his or her direction., • Hire and terminate employees in accordance with Drucker + Falk policy and under the direction of the Property Manager., • Counsel (and document) maintenance employees to improve their work and work attitudes., • Establish schedules and assign personnel routine maintenance tasks., • Make certain that the community has maintenance coverage at all times, in case of emergencies or emergency work requests. Able to be on emergency “on call” status to respond to emergency work orders., • Perform all duties with the highest consideration for safety, and train and be responsible for all staff members to do so as well., • Conduct monthly safety meetings with staff and document topics discussed. Emphasize safety with all new employees., • Continually inspect buildings, grounds, and common areas to identify needed preventative maintenance, to ensure that the buildings and common areas are clean, grounds are being properly maintained and to identify current and potential safety hazards., • Maintain a clean, safe, and well-organized shop and equipment storage area in compliance with all OSHA regulations, i.e., maintain Hazard Communication Program, SDS, State and Federal posters and posting OSHA summary forms., • Perform necessary maintenance and repairs in apartments with work orders., • Strive to see that all work orders are completed within 24 hours., • Turn vacant apartments into units ready for occupancy following Drucker + Falk guidelines., • Schedule contractors for maintenance related work. Secure bids and proposals as directed., • Use contract labor whenever it becomes cost effective, following approval by the Property Manager or Regional Property Manager., • Strictly follow established budgetary guidelines., • Follow all Drucker + Falk purchasing directives and procedures., • Maintain operating manuals, warranty records and other materials pertaining to general inventory and parts replacement and availability., • Keep abreast of developments in the field, including new products and new and less expensive ways of making repairs, • Always maintain the highest standards of resident relations., • Complete and return Monthly Preventative Maintenance Sheets., • Monitor all O & M Programs (i.e., Asbestos, Lead Based Paint and Mold & Fungi) in place on the community to ensure that all O & M Specialists, Consultants, Contractors and/or employees are notified of the presence of these substances when work to be performed may involve the disturbance of these substances. Ensure that all such work is performed following the established O & M program., • The Maintenance Superintendent is also responsible for maintaining all record keeping and reports relating to these O&M programs to ensure that the property is in full compliance., • Must be accurate in all phases of technical work., • Performs other duties as assigned. Qualifications Supervisory Responsibilities - Manages 0-8 employees; in the Maintenance department. Responsible for the overall direction, coordination, and evaluation of these employees. Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to taste or smell. The employee must frequently lift and/or move up to 100 pounds. Specific vision abilities required by this job include peripheral vision and depth perception. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to toxic or caustic chemicals; outside weather conditions and risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; extreme cold; extreme heat and vibration. The noise level in the work environment is usually moderate. Education and/or Experience - High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience Certificates, Licenses, Registration Current Driver's License, CFC Certificate Other Skills and Abilities HVAC, CPO Certification, Plumbing Skills, Carpentry Skills, Electrical Skills Knowledge of OSHA regulations, SDS standards Benefits: Competitive Benefits to include Health, Dental, Life, 401K, Employees Assistance Program, Long Term Disability, Vacation and Sick Leave Equal Opportunity Employer. Drug-Free Workplace.

Job Description EPC Services Company, a leading power/utility engineering consultant and construction firm, has an immediate opening for a full-time Warranty & Commissioning Construction Manager. This position is a traveling Construction Manager role for individuals with strong knowledge of the means and methods used in the construction of electrical substations, transmission lines, and renewable energy (solar and wind) collection systems. A Warranty & Commissioning Construction Manager (CM) may fill in as a Construction Manager at times and provide direct supervision of all subcontractor's activities and material receiving on the projects. The position of Warranty & Commissioning CM is an essential role in the organization. The CM is available on a 24-hour basis to respond to emergencies that may be covered under warranty. The CM is responsible for troubleshooting inquiries for client claims, field response and repairs as well as all aspects of the commissioning activities including client training and relationships for EPC Services projects across the U.S. This position requires a minimum of 80% travel. Its functions include 1:1 and/or collaborative client discussion of problems, resolution, and timing of repairs. Additional work may include field support of electrical apparatus testing, setting, and testing protective relays and functional verification of control, protection, and alarm circuits. The position will work with project managers to advise on safety, quality control/quality assurance, on-site reporting, environmental compliance inspections, and training as required. This position reports directly to the Project Manager for all project specific issues and reports to the Manager of Warranty & Commissioning for assignment to the projects, for general installation practices, and inspection processes. Minimum Requirements: High school diploma or equivalent; switching certification; a minimum of 5 years' experience in transmission line and/or substation construction; understand all safety requirements and best practices to ensure that our employees and out subcontractors are always operating in a safe manner; capable of reading and understanding technical documentation and equipment manuals; familiar with IEEE standards, procedures, and guides; excellent organizational skills; strong written and verbal communication skills; working knowledge of a variety of computer applications including Microsoft Office (Word, Excel, PowerPoint, and Access), Vista ERP software knowledge a bonus; driving (ability to be insured to drive company vehicles). The successful applicant will be subject to client-mandated drug and background checking and is subject to EPC Services Company's auto insurance carrier requirements. Applicants must not require sponsorship for employment visa status (e.g., H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include: • Medical, dental and vision insurance, • Flexible spending account, • Health savings account, • Life insurance, • Disability insurance, • 401(k), Profit Sharing and Employee Stock Ownership Plan, • Paid vacation, personal days, and holidays, • Paid Parental Leave An Equal Opportunity Employer Job Posted by ApplicantPro

Requisition Number: 25196 Required Travel: 0 - 10% Employment Type: Full Time/Salaried/Exempt Anticipated Salary Range: $78,897.00 - $96,657.60 Security Clearance: Ability to Obtain Level of Experience: College This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Who We Are We are seeking a talented and experienced Cooling Engineer to join our mechanical engineering team. This role is crucial for the design, analysis, and integration of complex cooling systems for various naval and defense platforms. The ideal candidate will have a strong background in thermodynamics, heat transfer, and fluid dynamics, with hands-on experience in designing and testing cooling solutions. This position is contingent upon contract award. What You Will Do • Performs engineering functions in one or more of the following specialties: electronics, electrical, mechanical, civil, naval, and/or chemical., • Receive and perform assignments involved in the analysis, design, integration, testing, installation, operation, product support, and maintenance of the Aegis auxiliary cooling systems and components, • Ensure proper activation and operation of the cooling systems supporting the Aegis Combat System (ACS) infrastructure including safety processes, diagnostic test procedure review, crew training and trials support, configuration and its interface/relationships with shipboard auxiliary equipment, • Configure, and operate temporary convection-type cooling systems to support Aegis Combat System testing, • Support Aegis auxiliary equipment configuration and operation supporting the testing and employment of the ACS, • Identify, report, and assist in the resolution of cooling equipment operational and configuration issues, • Ensure demineralized water, ship's chilled water, & sea-water supply service pumps, Electronic Cooling Water skids, SPY Sea Water Cooling skids, heat exchangers, cooling water air-removal systems, air handling units, and supporting piping configurations are operational and available to support Aegis Combat System operation and coordinate with the senior cooling engineer for cooling related matters, • Work as a team member to complete customer deadlines which may have competing/shifting priorities, • Document test procedure discrepancies for future revision\n What You Must Have • 5 years relevant experience with Bachelors in related field; 3 years relevant experience with Masters in related field; or 0 years experience with PhD or Juris Doctorate in related field. 4 years of additional equivalent experience can be substituted for a BA/BS., • Candidate must be a recent graduate with a Bachelor's of Science degree in Engineering or graduating college senior who is in good academic standing and pursuing a Bachelor's degree in Engineering. Bachelor's of Science Degree in Engineering from an ABET accredited program is required prior to starting employment., • Candidate must have a strong understanding of thermodynamics, fluid mechanics, and heat transfer principles., • Candidate must have experience with 3D CAD software (e.g., SolidWorks, Inventor)., • Candidate must have the ability to work in a fast-paced, collaborative team environment., • Candidate must have the ability to obtain and maintain a security clearance.\n Bonus Points For Having! • Experience with cooling systems for naval platforms or defense electronics., • Familiarity with military and marine standards (e.g., MIL-STD, ABS, etc.)., • Experience with system-level modeling and simulation tools., • Active security clearance.\n Physical Requirements Office, industrial or shipboard environment. Capable of climbing ladders and tolerating confined spaces and extreme temperature variances. Lifting and moving of materials not to exceed the guidelines set for one man lift. HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

1st Class Structural Welder Purpose: Colonna's Shipyard, is seeking a 1st Class Structural Welder to support 1st shift operations in our Shipyard in Norfolk, VA. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding producers, or oral instructions, using electric arc-welding equipment., • Prepare all material surfaces to be welded, ensuring that there is no loose or think scale, slag, rust, moisture, grease, or other foreign matter., • Weld completion in flat, horizontal, vertical, or overhead positions., • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding., • Manually apply filler rod to supply weld metal., • Clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes., • Set up and operate welding equipment and select proper electrodes according to metals to be joined or as instructed., • Preform grinding and joint preparation for NDT processes., • Burning, washing, edge prepping using hand and automated equipment., • Flux cored inner shield and dual shield welding along with oxy-acetylene torching, air-arc, weld-wire gas, stick and pipe flange., • Construct or repair metal products by joining parts either manual (using a variety of welding methods including electric arc, MIG and TIG welding or oxy-acetylene welding) or by machine., • Read and understand the Chemist and Competent Persons reports and determine if job sites, particularly those involving combustible material, are safe for personnel and hot work., • Preforms grinding and joint preparation for NDT processes., • Mark or tag material with proper job number, piece marks, and other identifying marks as required., • Will be required to wear personal protective equipment hard hat, safety glasses, steel toe boots/shoes and, when necessary, respirator., • Must have at least seven (7) years' experience as a Welder., • Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding) and FCAW (Flux Cored Arc Welding), • Must have knowledge of welding techniques (oxygen-acetylene, electric arc, and TIG), tools and equipment, • Must have knowledge of and ability to use hand tools and instruments associated with the trade, • Must be able to work effectively with others., • Must be able to comprehend blueprints, sketches, and templates., • Must have ability to enter and move through manholes to reach and work in internally confined spaces., • Must be a steady, reliable worker., • Must be able to instructions., • Prefer previous technical training., • DBIDS eligibility preferred. \n\n Security: • Position requires US Citizenship.\n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).