Trabajos structural welder en Norfolk, VirginiaCrear alertas

Now Hiring: Structural Welders \n Location: Norfolk, VA \n Company: NSC Staffing \n Send resumes to: [email protected]\n \n \n NSC Staffing is seeking Structural Welders with 2-5 years of experience for an exciting project in Norfolk, VA. This is an excellent opportunity to join a skilled team working on the repair and modernization of marine vessels, including those of the U.S. Navy, Military Sealift Command, and commercial ships. If you are a certified welder ready for your next challenge, apply today! \n \n Position Overview: As a Structural Welder, you will be responsible for welding various metals on ships or in shops, supporting mechanical repairs, and leading assigned helpers. Candidates must pass the Structural Weld test (Stick and Flux Core) and know welding techniques, ship repair terminology, and ship compartment naming conventions. \n \n Key Responsibilities:\n\n • Pass the Structural Weld Test (Stick and Flux Core) and work on welding pipes of various metals.\n, • Perform welding for ship repair and modernization projects on marine vessels, including military and commercial ships.\n, • Provide guidance to assigned helpers during welding tasks.\n, • Write Condition Reports, including detailed findings and recommended corrective actions.\n, • Interpret drawings, specifications, and Navy/MSC/ABS standards.\n, • Safely operate and maintain welding equipment, portable power tools, and hand tools.\n, • Ensure compliance with all OSHA standards and wear proper PPE, including hard hats, respirators, safety harnesses, and flotation gear as required.\nQualifications & Experience:\n\n, • 2-5 years of experience as a Structural Welder, with specific knowledge of SMAW, FCAW, and GMAW welding techniques.\n, • Ability to certify in the following: \n \n, • SMAW (Shielded Metal Arc Welding)\n, • GTAW (Gas Tungsten Arc Welding)\n, • FCAW (Flux Core Arc Welding) or Silver Brazing\n \n, • Knowledge of P-3 joint with a permanent backing ring and P-14 socket weld joint.\n, • Understanding of ship repair terminology and ability to interpret technical drawings and manuals.\n, • Physically capable of wearing all required PPE and adhering to OSHA safety standards.\n, • Basic math skills (addition, subtraction, multiplication, division) and familiarity with U.S. standard and metric measurement systems.\nWork Environment: You will work in shipyards, aboard vessels, or industrial settings where attention to detail, quality work, and adherence to safety protocols are essential. Projects will involve hands-on welding and supervision of helpers, ensuring tasks are completed efficiently and to high standards. \n \n Why NSC Staffing\n \n NSC Staffing is committed to being a trusted provider of innovative staffing solutions across the Marine, Energy, Commercial, and Industrial sectors. We foster long-term relationships by exceeding client expectations and enhancing the lives of our employees. Additionally, NSC prioritizes community service and responsible stewardship of customer resources. \n \n Benefits of Joining NSC Staffing:\n\n • Anticipated Salary Range*: [$26 - $29]\n, • Comprehensive medical, dental, and vision coverage\n, • 401(k) retirement plan\n, • Direct deposit or Global Cash Card option\n, • Long-term job opportunities\n, • Referral bonuses for qualified candidates\n, • OSHA training and certification\n *The anticipated salary range represents the estimated base pay for this role. Final compensation will be determined based on experience, qualifications, and other job-related factors and may vary from the posted range. \n \n Join Our Team Today!\n \n Apply now and advance your career with NSC Technologies - a leader in shipyard and industrial staffing. \n Visit our jobs page: www.nscstaffing.com \n \n NSC Technologies is a drug-free workplace and an equal-opportunity employer (EOE AA/M/F/V/D).\n \n #MA50

Position Title: Quality System Supervisor III - Structural (Fabrication Facility) \n \n \nWork Location: Chesapeake, VA - In Office \n \n \nFLSA Status: Full-Time, Non-exempt \n \n \nREQ#26_08056A \n \n \nSummary of duties - The Quality Assurance System Supervisor performs duties of Level II NDT with the ability to obtain and maintain certification. Assist in preparation of materials and equipment; and when applicable in the qualifying of Welding procedures for NAVSEA and ABS programs. May assist Level III NDE as necessary in the preparation and maintenance of materials to support the Welder, Brazer and NDT training and qualification programs. Perform specific inspections as assigned and assist in surveillance of work performed on government and commercial work items, specializing in structural and welding compliance.\n \n \nPerforms in-progress work surveillances and will conduct in-process and final work-package review after work-completion for welding, brazing and NDT, provided required certifications have been obtained.\n \n \nMust possess and demonstrate working knowledge of NAVSEA, US Navy, Military Sealift Command (MSC), American Bureau of Shipping (ABS), Huntington Ingalls Industries- Newport News Shipbuilding (HIINNS) and Electric Boat (EB) specific requirements relating to welding, fabrication, inspections, and workmanship.\n \n \nAssists in the development and maintenance of quality standards for structural and pipe material and equipment receiving, in-process and final inspection in accordance with company and contractual requirements. Reviews status of in-process rejections and recommends appropriate corrective action. Assist QA as necessary with internal audits to monitor compliance with company procedures.\n \n \nAssist in maintaining quality records for structural and pipe material. Receiving equipment, in-process and final inspection in accordance with company and contractual requirements.\n \n \nAdvises management of test trends, returns, vendor performance and audit results and corrective action needed. Performs other assigned duties as required by Management.\n \n \nArea of Expertise: Welding, Brazing and Non-Destructive Testing associated with service craft, boat, ship and submarine repair and modernization. Reports to the Director of Quality.\n \n \nSpecific description of duties:\n \n \n\n • Ability to obtain and maintain Level II NDT (VT) certification\n, • Assist with the development of quality control and inspection procedures for inclusion in production Fabrication Packages\n, • Accomplishes and formally documents in process, dimensional and visual inspections.\n, • Maintains, safeguards and is identified as the custodian of calibrated test and measurement equipment issued to the Fabrication Facility.\n, • Assist with defining test standards, and specifies test equipment and procedures\n, • Reviews Technical Specifications and contract requirements during Fab Package to provide guidance for Welding, Brazing and NDT technical requirements, PCP development and qualification needs\n, • Assist in development of prepopulated test and inspection records\n, • Aide in monitoring compliance in accordance with company Quality Management System, Workmanship standards and Customer requirements\n, • Conducts Quality Assurance and Quality Control Inspections, and Surveillances randomly and in accordance with written instructions.\n, • Performs inspections of material and prefabricated assemblies prior to items being delivered to customer or work site.\n, • Aide in evaluation of Suppliers via audits and inspections\n, • Perform duties in regard to support shop facility outfitting, organization, improvements and maintenance.\n, • Will operate as a Quality Liaison to mitigate and adjudicate customer (internal and external) quality concerns and non-conformances.\n, • Assist with review of QA control requirements with customer representative to assure compliance with requirements.\n, • Executes, Investigates and Responds to Internal and External Corrective Action Requests in accordance with Prism Maritime QMS and customer contract requirements.\n, • Assist with review of contractually required documentation for accuracy and completeness\n, • Perform any other assignments or tasks as needed or requested by management to assist in accomplishing the organization's mission, objectives and goals.\n, • Must be physically capable to stand/walk for long periods of time on the Fabrication Shop floor.\n, • Must be safety oriented and operate in a preventive capacity to reduce unplanned events and employee injuries.\n\n\n, • Overtime is routinely required but not guaranteed\n, • Personal transportation required for local inspections.\n, • Possession of an active State Driver's License is required\n, • Perform any other assignments or tasks as needed or requested by management to assist in accomplishing the organization's mission, objectives and goals.\n\n \n \nEducation / Specialized training - \n \n\n • High School Diploma or equivalent and including one of the following time related field experience scenario criteria:\n\n\n, • Bachelor's Degree, Level II NDT (VT) and 7 years technical experience relating US Navy structural installation, fabrication and/or inspection\n, • Associates Degree, Level II NDT (VT) and 10 years technical experience relating US Navy structural installation, fabrication and/or inspection\n, • Combination of On-the-Job Experience: 15 years Welder [Qualified]/ Level I WWI [Qualified]/ Level II NDT[Qualified] related to US Navy structural installation, fabrication and/or inspection\n\n \n \nCertification / Licenses (as required for the task being performed) \n \n\n • ASNT NDT Level II (VT)\n\n \n \nSecurity Clearance -\n \n\n • Must be a U.S. citizen\n, • Clearance up to Secret level may be required.\n\n \n \nPhysical Requirements - \n \n \nPhysical requirements include the following:\n \n\n • Lifting/moving up to and including 50 pounds\n\n \nIn performing these duties, you may be required to work outdoors. You will experience temperature variations, extremely loud noises and other physical hazards.\n \n \nCompany Overview:\n \nPrism Maritime is a premier maritime service provider for Alteration Installation Team (AIT) and Modernization related Services in support of US Maritime and Shore-based clients. Prism Maritime is a privately held business headquartered in Chesapeake, VA, with offices in San Diego and Ventura, CA. Established in 2006, Prism Maritime currently employs over 350 professionals and maintains an ISO 9001-2015 certified Quality Management System. \n \n \nPrism Maritime is an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, sex, national origin, ethnic origin, physical or mental disability, veteran status, age, or any other characteristic protected by federal, state, or local laws. U.S. citizenship is required for most positions. \n \n \nIf you need special assistance or an accommodation while seeking employment with us, please email [email protected] or call: 757-460-8800.\n \n \nTo Apply: Visit www.prismmaritime.com and click on Careers>Job Openings \n \n \nAll applications are active for 90 calendar days. After 90 days you must re-apply to still be considered for this position.

Now Hiring: Structural Welders \n Location: Norfolk, VA \n Company: NSC Staffing \n Send resumes to: [email protected]\n \n \n NSC Staffing is seeking Structural Welders with 2-5 years of experience for an exciting project in Norfolk, VA. This is an excellent opportunity to join a skilled team working on the repair and modernization of marine vessels, including those of the U.S. Navy, Military Sealift Command, and commercial ships. If you are a certified welder ready for your next challenge, apply today! \n \n Position Overview: As a Structural Welder, you will be responsible for welding various metals on ships or in shops, supporting mechanical repairs, and leading assigned helpers. Candidates must pass the Structural Weld test (Stick and Flux Core) and know welding techniques, ship repair terminology, and ship compartment naming conventions. \n \n Key Responsibilities:\n\n • Pass the Structural Weld Test (Stick and Flux Core) and work on welding pipes of various metals.\n, • Perform welding for ship repair and modernization projects on marine vessels, including military and commercial ships.\n, • Provide guidance to assigned helpers during welding tasks.\n, • Write Condition Reports, including detailed findings and recommended corrective actions.\n, • Interpret drawings, specifications, and Navy/MSC/ABS standards.\n, • Safely operate and maintain welding equipment, portable power tools, and hand tools.\n, • Ensure compliance with all OSHA standards and wear proper PPE, including hard hats, respirators, safety harnesses, and flotation gear as required.\nQualifications & Experience:\n\n, • 2-5 years of experience as a Structural Welder, with specific knowledge of SMAW, FCAW, and GMAW welding techniques.\n, • Ability to certify in the following: \n \n, • SMAW (Shielded Metal Arc Welding)\n, • GTAW (Gas Tungsten Arc Welding)\n, • FCAW (Flux Core Arc Welding) or Silver Brazing\n \n, • Knowledge of P-3 joint with a permanent backing ring and P-14 socket weld joint.\n, • Understanding of ship repair terminology and ability to interpret technical drawings and manuals.\n, • Physically capable of wearing all required PPE and adhering to OSHA safety standards.\n, • Basic math skills (addition, subtraction, multiplication, division) and familiarity with U.S. standard and metric measurement systems.\nWork Environment: You will work in shipyards, aboard vessels, or industrial settings where attention to detail, quality work, and adherence to safety protocols are essential. Projects will involve hands-on welding and supervision of helpers, ensuring tasks are completed efficiently and to high standards. \n \n Why NSC Staffing\n \n NSC Staffing is committed to being a trusted provider of innovative staffing solutions across the Marine, Energy, Commercial, and Industrial sectors. We foster long-term relationships by exceeding client expectations and enhancing the lives of our employees. Additionally, NSC prioritizes community service and responsible stewardship of customer resources. \n \n Benefits of Joining NSC Staffing:\n\n • Anticipated Salary Range*: [$26 - $29]\n, • Comprehensive medical, dental, and vision coverage\n, • 401(k) retirement plan\n, • Direct deposit or Global Cash Card option\n, • Long-term job opportunities\n, • Referral bonuses for qualified candidates\n, • OSHA training and certification\n *The anticipated salary range represents the estimated base pay for this role. Final compensation will be determined based on experience, qualifications, and other job-related factors and may vary from the posted range. \n \n Join Our Team Today!\n \n Apply now and advance your career with NSC Technologies - a leader in shipyard and industrial staffing. \n Visit our jobs page: www.nscstaffing.com \n \n NSC Technologies is a drug-free workplace and an equal-opportunity employer (EOE AA/M/F/V/D).\n \n #MA50

Job Description Position Location: Norfolk, VA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed;, • May position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools;, • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms, • Follow Quality Assurance welding procedures, • Performs all work in accordance with established safety procedures., • Participates in special projects as required. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 1-5 years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds., • Read and understand blueprints and specifications. Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Pneumatic and Electric Hand Tools, • Knowledge, Skills and Other Abilities:, • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $17.00 - $33.00 hourly In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location.

Job Description Structural Aluminum Fabricator/Welder Candidate must be reliable, self-motivated, detail oriented, able to deliver jobs within expected time frame. They MUST have EXPERIENCE AT LEAST 5YRS in the structural steel industry and 2 YEARS in the Aluminum Fabrication Industry. This is a full-time position with competitive pay, based on experience, and immediate work within our shop in Portsmouth, Va. Must be able to demonstrate ability to perform multi-pass, all position fillet and butt weld using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding) and FCAW (Flux Cored Arc Welding). Comprehend blueprints, sketches, and templates. Complete lay outs using drawings and/or templates and/or by picking up and developing the geometry required. Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding producers, or oral instructions, using electric arc-welding equipment. Prepare all material surfaces to be welded, ensuring that there is no loose or think scale, slag, rust, moisture, grease, or other foreign matter. Weld completion in flat, horizontal, vertical, or overhead positions. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, shielded metal arc. Clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. Set up and operate welding equipment and select proper electrodes according to metals to be joined or as instructed. Preform grinding and joint preparation for NDT processes. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Must be capable of using oxy/fuel torch to cut steel. Proficient in adding and subtracting of measurements. Positive attitude, superb attendance record and an eagerness to learn. Be Dependable. Self-starter that displays a strong work ethic and a commitment to quality workmanship. Willing to work in a team based fast paced environment. Work independently to complete responsibilities as required Job Type: Full-time Compensation: $42,250.00 to $56,000.00 /year based on a 40 hour-work week and average workweek for 2023 is 45 hours. 401k with Company Matching, Health Care, Paid Time Off and vacation. Experience: • Structural Steel – 5 years, • Aluminum Fabrication - 2 years, • TIG Location: Hampton Roads, Virginia Required work authorization: United States Company DescriptionMARRICK is a small fab shop that specializes in one/off projects for our customers.MARRICK is a small fab shop that specializes in one/off projects for our customers.

Job DescriptionCompany Description Veolia is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description Job Summary: Under general oversight, the Lead Welder executes advanced welding tasks including MIG, TIG, Arc, and Acetylene techniques. This position is responsible for the construction, maintenance, assembly, and alteration of diverse metal components, including fixtures, machinery, piping, and structural frameworks. This role is designated as a working lead within the team. Key Characteristics: We are seeking a precise and experienced Lead Welder to facilitate the manufacturing and assembly of specialized water treatment systems and equipment. The successful candidate will be responsible for fabricating components while supervising a welding team to maintain production schedules and meet shop demand. Duties & Responsibilities: Schematic and Materials Knowledge: • Establishes priorities for the shop; plans, assigns, inspects, and directs the work of shop weld team., • Performs detailed calculations for time and material expenditures by forecasting labor hours and initiating material orders., • Familiarity with various construction materials, their properties, and applications., • Ability to interpret material specifications and select appropriate materials for specific projects. Training New Hires: • Mentor and onboard new team members., • Provide hands-on training related to construction techniques, safety protocols, and company procedures., • Foster a positive learning environment. Ability to Work with Minor Oversight: • Execute tasks independently while adhering to project guidelines., • Demonstrate self-reliance and problem-solving skills., • Seek guidance when necessary but maintain productivity without constant supervision. Knowledge, Skills & Abilities Preferred: • Previous experience as a Welder The job description is not designed to capture all the employee’s responsibilities but is intended to capture essential functions of the role. Responsibilities may change over time and may be assigned at any time. Qualifications Education & Experience Required: • High school diploma or equivalent., • Completion of formal apprenticeship, extensive training program in a vocational school, or on the-job training program; experience as a journey level welder using a variety of welding techniques., • Experience in fabrication and manufacturing, preferably in the water treatment or related industry., • Proficiency in operating a variety of fabrication tools and equipment., • Knowledge of pipe fitting techniques and materials used in water treatment systems., • Strong commitment to safety and following established procedures., • Ability to work independently and as part of a team., • Strong organizational skills and attention to detail. Preferred: • Working Conditions Additional Information At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We’re an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. To ensure transparency and compliance with employment laws, we provide the following details regarding this position: Compensation: The compensation range is tied to the market for similarly bench-marked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate’s knowledge, skills, experience and market conditions, as well as internal peer equity. Depending upon all the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range: $26-32 Artificial Intelligence (AI) Disclosure: We do not use Artificial Intelligence (AI) to screen, assess, or select applicants for this position. Vacancy Status: This posting is for an existing vacancy. Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of the company and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination. Why Veolia? Join a company that values Responsibility, Solidarity, Innovation, Customer Focus, and Respect. You'll receive comprehensive technical and commercial training, direct mentorship from experienced Account Managers, and a clear pathway to Account Manager promotion with direct account responsibilities. Career Development Path: This position is designed as a stepping stone to Account Manager, where you'll assume direct customer responsibility and independent account management upon demonstrating commercial excellence. Ready to transition your technical expertise into a rewarding customer-facing career while making a difference in water treatment and sustainability? Apply today! We realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We’re an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Medical, Dental, & Vision Insurance Starting Day 1! Life Insurance Paid Time Off Paid Holidays Parental Leave 401(k) Plan - 3% default contribution plus matching! Flexible Spending & Health Saving Accounts AD&D Insurance Disability Insurance Tuition Reimbursement Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of the company and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Job Description Position Title: Welding Program Manager Work Location: Chesapeake, VA - In Office FLSA Status: Full-Time, Exempt REQ#26_091712 Summary of duties – Reports to Director of Operations. The Welding Program Manager is responsible for the technical ownership, implementation, control, and continuous improvement of the company’s welding program, which provides standardized welding processes, procedures, oversight, and support to both the shipboard systems integration, alteration, installation, and testing (AIT) sector and the Fabrication (Fab Shop) sector, including the fabrication of shipboard subassemblies, equipment foundations, and related structural and mechanical components. Qualified candidates must be able to support multiple priorities in an evolving environment. The Welding Program Manager develops, maintains, and administers the company’s welding procedure and welder qualification program in accordance with applicable customer requirements, military and commercial standards, codes, specifications, drawings, and contract requirements. The position ensures that welding procedures and welder qualifications are technically valid, properly documented, current, traceable, and applicable to the work being performed. Qualified candidates must be skilled with verbal and written communication and be prepared to interface daily with organizational contemporaries to ensure the successful achievement of company weld program objectives. managing multiple priorities in an evolving environment The position owns the welding procedure specification (WPS), procedure qualification record (PQR), welder performance qualification (WPQ), welder continuity, and associated welding documentation systems, including development, review, approval coordination, revision control, retention, and accessibility of records. The individual establishes and maintains the systems necessary to ensure that only appropriately qualified welders, approved procedures, and qualified welding processes are used for production work. The position has the authority and responsibility to identify welding activities that do not meet applicable requirements and to recommend or initiate corrective action, including withholding approval for use of an unqualified procedure, unqualified welder, or otherwise noncompliant welding process. Specific description of duties – • Ensure welder qualifications and continuity records accurately reflect individual qualifications and remain current in accordance with governing requirements., • Oversee procedure qualification and welder performance qualification testing, including coordination with qualified testing laboratories, inspectors, and customer representatives as required., • Create and modify Quality Management System (QMS) documentation., • Identify systemic welding-program deficiencies and implement corrective and preventive actions., • Maintain objective evidence necessary to demonstrate welding program compliance during customer, regulatory, classification society, government, and internal audits., • Interface with Quality Assurance, Engineering, Manufacturing, Operations, Supply Chain, Contracts, Program Management, and customer representatives on welding-related matters., • Provide technical input during source inspections, customer inspections, government oversight, and audits involving welding activities., • Establish metrics and reporting mechanisms for welding qualification status, continuity, procedure utilization, weld defects, rework, nonconformances, audit findings, and other indicators of welding program performance., • Evaluate new welding technologies, processes, equipment, and materials for potential application within the fabrication operation., • Support estimating, proposals, and new-work reviews by identifying welding requirements, qualification needs, technical risks, and resource requirements., • Maintain awareness of changes to applicable welding codes, standards, Navy requirements, customer specifications, and company processes and incorporate changes into the welding program as appropriate., • Perform other related duties consistent with the technical and managerial responsibilities of the position. Qualifications/ Experience – • Bachelor’s degree in Welding Engineering, Materials Engineering, Metallurgical Engineering, Mechanical Engineering, or a closely related engineering discipline; equivalent technical education and substantial welding engineering experience may be considered., • Significant professional experience in welding engineering, welding program management, or welding quality within heavy fabrication, shipbuilding, naval, defense, marine, or similarly regulated manufacturing environments., • Demonstrated experience developing and administering welding procedure and welder qualification programs., • Familiarity with HII-NNS carrier new construction and NSTP-1688 supporting EB fabrication specifications, • Demonstrated working knowledge of applicable welding codes, standards, military specifications, customer requirements, and quality-system requirements., • Demonstrated experience with WPS/PQR/WPQ development, qualification, control, and records management., • Experience establishing and maintaining welder continuity systems., • Experience auditing welding operations and identifying and resolving compliance deficiencies., • Extensive experience with training and continuous improvement of best work practices, and applying QMS requirements to daily tasking., • Strong understanding of welding metallurgy, weldability, welding processes, consumables, heat input, preheat/interpass controls, distortion, weld defects, and weld repair., • Experience working directly with certified welders, welding supervisors, inspectors, quality personnel, and manufacturing organizations., • Ability to interpret engineering drawings, welding symbols, specifications, and technical requirements., • Strong technical writing, documentation, organizational, and communication skills., • Ability to work independently and exercise sound technical judgment in a highly regulated defense/shipbuilding environment., • AWS Certified Welding Engineer (CWEng) or comparable professional welding engineering credential., • AWS Certified Welding Inspector (CWI) certification., • AWS Certified Welding Supervisor (CWS) or equivalent supervisory/production welding experience., • Experience supporting U.S. Navy shipboard fabrication, alteration, installation, repair, or sustainment programs., • Experience with NAVSEA welding requirements and applicable Navy fabrication and welding standards/specifications., • Experience with ASME, AWS, ABS, or other applicable commercial/industrial welding codes and standards., • Experience supporting government/customer audits and source inspections., • Experience with electronic welding qualification/continuity databases or quality-management systems; proficiency with maintaining digital records via SharePoint or equivalent., • Familiarity with NDE methods and weld inspection requirements., • Experience implementing welding program improvements across multiple operating locations or business units. Security Clearance – • Not required Physical/Environmental Job Requirements – Physical requirements include the following: • None Company Overview: Prism Maritime is a premier maritime service provider for Alteration Installation Team (AIT) and Modernization related Services in support of US Maritime and Shore-based clients. Prism Maritime is a privately held business headquartered in Chesapeake, VA, with offices in San Diego and Ventura, CA. Established in 2006, Prism Maritime currently employs over 350 professionals and maintains an ISO 9001-2015 certified Quality Management System. Prism Maritime is an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, sex, national origin, ethnic origin, physical or mental disability, veteran status, age, or any other characteristic protected by federal, state, or local laws. U.S. citizenship is required for most positions. If you need special assistance or an accommodation while seeking employment with us, please email hropportunities@prismmaritime.com or call: 757-460-8800. To Apply: Visit www.prismmaritime.com and click on Careers>Job Openings All applications are active for 90 calendar days. After 90 days you must re-apply to still be considered for this position.

Marine WelderThis opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination—not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems—from small watercraft to submarines, surface combatants and aircraft carriers—HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges.HII Platform Modernization (PM) trades teams provide expert solutions on submarine alterations and installations for fleet modernization. The selected Marine Welder/Fitter candidate will support PM, working closely with our skilled trades teams, on active class surface ships, using various welding processes, mechanical techniques and related duties to remove, install, and upgrade industrial equipment, assisting with alterations and installations for fleet modernization on various contracts. Selected candidates will be required to travel to shipyards and military bases located around the country and abroad when not assigned to a local task. Per Diem provided based on location when on travel. Travel and lodging expenses are covered by the company.Candidates must be able to demonstrate welding ability on needed processes through X-ray qualification testing and pass with a satisfactory grade from our Quality Assurance Team within the first three weeks from start date for continued employment.Essential Job Responsibilities:Display levels of quality, integrity, safety, respect, engagement, and performance consistent with company values.Support trades team by working on active class surface ships to assist with alterations and installations for fleet modernization.Perform all work in accordance with established quality and safety procedures.Perform a variety of simple and complicated tasks, both routine and non-routine, including those outside of specialty, related to shipboard maintenance to meet standards on various contracts at company, customer and/or field locations.Work from blueprints, engineering sketches, charts, or work orders.Fabricate, maintain, repair, and modify structural elements and equipment.Lay out and mark points and lines on parts or subassemblies using rule, square, scribe or templates.Cut, fit, assemble, and position pieces to be welded into jigs, holding fixtures, and existing structure using hand and powered tools.Apply comprehensive understanding of appropriate welding processes (SMAW, FCAW, GMAW) and production to join, surface, fabricate, and repair parts of metal, sheet metal, and other weld-able materials toward completion of assignments.Work with technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports.Maintain effective communications and relations.Provide reports to team and senior management.Minimum Qualifications:Candidates must be able to demonstrate welding ability on needed processes through X-ray qualification testing and pass with a satisfactory grade from our Quality Assurance Team within the first three weeks from start date for continued employment.Must be a U.S. citizen.Must have High School education or Trade School or equivalent, and 4 years of related experience welding aboard naval vessels.Prefer technical/professional certifications.Must be able to obtain medical clearance to wear a half-face respirator.Must have welding experience with stick welding (SMAW), Flux Core (FCAW) and Aluminum MIG (GMAW) processes in all positions from 2G to 6G.Must have working experience reading and interpreting drawings, blueprints, weldments, technical manuals, engineering sketches, charts and/or work orders as well as written and verbal instruction for products to be fabricated and/or installed.Must be able to accurately read and follow welding symbols.Must be able to accurately read measuring devices to 1/16 of an inch.Must be able to work outside of trade specific requirements as team projects require, assisting team members towards task completion.Must demonstrate applied comprehensive knowledge of quality control procedures to verify accuracy, compliance, and workmanship throughout all stages of fabrication and equipment operation.Must be able to follow and enforce safety procedures.Must have experience working in a team environment and be able to communicate effectively with others.Must provide hand tools and trade specific PPE per trades designationMust be able to travel up to 75% when not assigned to local tasking.Preferred Requirements:Candidates with experience TIG welding pipe are preferred.Candidates with current or prior welding certificates applicable with MIL-STD-248 preferred.Candidates who are currently enrolled or have graduated from and/or completed a vocational school or skilled trades certificate program are preferred.Current OSHA 10 Maritime Certificate a plus.Candidates with current security clearances are preferred.Physical Requirements:Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.May ride ships at sea for extended periods.May require wearing a respirator.Travel may be required within and outside of the continental United States.Meet HII's Mission Technologies DivisionOur team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense – the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class.Find the role that's right for you. Apply today. We look forward to meeting you.

Job DescriptionJob Opportunity: Structural Welder LEAD Staffing | Hampton Roads, VA Location: Hampton Roads, VA Schedule: Full-Time | Contract | 40 hours per week (Overtime as required) About the Role We are seeking an experienced Structural Welder to support shipyard operations in Hampton Roads, VA. This role involves performing structural welding on naval and commercial vessels using various welding processes in compliance with shipyard and naval specifications. Key Responsibilities • Perform structural welding using SMAW, FCAW, GMAW, and GTAW processes as required., • Weld ship hull structures, foundations, brackets, and other structural components., • Interpret and work from blueprints, weld symbols, and engineering drawings., • Ensure weld quality meets applicable codes, standards, and inspection requirements., • Perform fit-up and tack welding of assemblies prior to final welding., • Operate grinding, cutting, and gouging equipment., • Maintain welding equipment and work area in safe, clean condition., • Follow all shipyard safety procedures and welding quality standards. Requirements, • Minimum of 3 years of structural welding experience; marine or shipyard environment preferred., • Proficiency in multiple welding processes (SMAW, FCAW, GMAW preferred)., • Ability to pass welder qualification tests per applicable codes., • Strong blueprint and weld symbol reading ability., • High school diploma or GED required., • Must be willing to undergo background check and drug screening., • Ability to work overtime, weekends, and extended schedules as required., • Clean driving record required. Work Environment, • Shipyard and industrial settings, • Exposure to noise, heat, cold, confined spaces, and marine/industrial hazards, • PPE required at all times Job-Specific Interview Questions, • Describe your structural welding experience in a shipyard or marine environment., • Which welding processes are you certified or most experienced with?, • How do you prepare and fit up structural components prior to welding?, • What welding codes or standards are you familiar with (AWS, NAVSEA)?, • How do you ensure weld quality and minimize defects?, • Describe the most complex structural weld you have performed., • How do you handle distortion or warping of weldments?, • What safety precautions are most important when welding in confined spaces?, • How do you manage work priorities when multiple weld jobs are scheduled simultaneously?, • How do you communicate weld fit-up or design conflicts to supervisors? Why Work With LEAD Staffing, • Competitive pay based on experience, • Paid Sick Leave, • Holiday Pay (eligible after qualifying hours worked), • Medical, Dental, and Vision Insurance options, • Referral Bonus Program – earn a bonus for referring qualified candidates, • Consistent shipyard work with overtime opportunities, • Opportunity to work on complex naval and industrial projects, • Strong safety-first work culture Equal Employment Opportunity (EEO) LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender expression, genetic information (including characteristics and testing), military and veteran status, labor union affiliation, and any other characteristic protected by applicable law. \nCompany Description “At LEAD, your career is our top priority. As a leading recruiting partner, we're dedicated to connecting talented job seekers with exciting opportunities and rewarding careers across a variety of dynamic industries. Our team takes the time to understand our employee's unique skills, experience, and professional goals. We then leverage our extensive network and industry expertise to match them with the perfect fit - whether that's a short-term project, long-term contract, or a permanent role. Employee's don't just settle for just any job - they partner with LEAD and unlock a world of rewarding possibilities for themselves. Apply today and let us help you find the perfect fit.” “At LEAD, your career is our top priority. As a leading recruiting partner, we're dedicated to connecting talented job seekers with exciting opportunities and rewarding careers across a variety of dynamic industries. Our team takes the time to understand our employee's unique skills, experience, and professional goals. We then leverage our extensive network and industry expertise to match them with the perfect fit - whether that's a short-term project, long-term contract, or a permanent role. Employee's don't just settle for just any job - they partner with LEAD and unlock a world of rewarding possibilities for themselves. Apply today and let us help you find the perfect fit.”

Job Description We are seeking experienced Pipe Welders for our Norfolk, Virginia location to perform high-quality welding on pipe, plating, fabricated components, and marine structural assemblies in a shipyard environment. The Pipe Welder will use multiple welding processes and equipment to weld a variety of metals and pipe configurations in accordance with blueprints, specifications, welding procedures, and customer requirements. The ideal candidate will have strong pipe-welding experience and be proficient in multiple welding positions and processes, including FCAW, SMAW, GTAW (TIG), and air carbon arc gouging. Required Qualifications • U.S Citizenship required, • Minimum of 3-5 years of journeyman level pipe welder experience., • Weld a variety of metal surfaces, pipe, plating, castings, forgings, and fabricated components using multiple welding processes and equipment., • Perform welding in flat, horizontal, vertical and overhead positions., • Perform welding using FCAW, SMAW, and GTAW/TIG processes., • Prepare welding surfaces by cleaning, grinding, fitting, and preheating as required., • Demonstrated ability to perform 6G restricted-position pipe welding Assessment The following hands on assessment will be conducted: 1. Carbon Steel - FCAW (Flux Core Arc Welding) Welding process in the horizontal, vertical and overhead position (2G, 3G and 4G), 2. 6G GTAW pipe butt test with CUNI, CRES, and Carbon Steel Overhead and Vertical pipe socket tests with CUNI, CRES, and Carbon Steel All plates will be assessed using the x-ray method. Unique/Additional Requirements • Must be available and willing to work all shifts, including nights, weekends, overtime, and varying schedules as required., • Must be comfortable and capable of working at heights, in confined spaces, and in other challenging shipyard environments., • Must be physically capable of frequent carrying, pushing, pulling, standing, reaching, bending, and performing repetitive manual tasks., • Must have sufficient visual and auditory ability to safely perform assigned duties, recognize warning signals, and identify hazards., • Must maintain a high level of safety awareness and consistently follow company, shipyard, OSHA, and customer safety requirements., • Must be able to understand and follow written and verbal instructions in English.

Job Description Location: Hampton Roads, Virginia (Norfolk, Newport News, Portsmouth, Chesapeake) Job Type: Full-Time | Long-Term Shipyard Projects Pay Range: Competitive pay + overtime opportunities We are seeking experienced Welders and Fitters to join our team supporting major shipyard projects in the Hampton Roads, VA area. This is a great opportunity to work on high-profile ship repair, shipbuilding, and industrial marine projects with steady work and career growth. Welder Duties: • Perform structural and pipe welding (MIG, TIG, Stick, Flux Core, SMAW) on steel and aluminum in a shipyard environment, • Read and interpret blueprints, drawings, and technical specifications, • Execute proper welding techniques and inspect welds for quality assurance, • Work on naval vessels, commercial ships, and industrial marine structures Fitter Duties: • Layout, position, and fit steel and pipe components for assembly and welding, • Use cutting torches, grinders, and measuring tools to ensure proper alignment, • Interpret shipyard blueprints, drawings, and schematics, • Install foundations, bulkheads, frames, and structural parts onboard ships Qualifications: • Minimum 2 years of shipyard, marine, or industrial welding/fitting experience, • Ability to pass welding and/or fitting tests as required by the shipyard, • Familiarity with OSHA safety standards and shipyard safety practices, • Must be able to work in confined spaces, at heights, and onboard naval/commercial vessels, • Current certifications (ABS, NAVSEA, or AWS) a plus Benefits AND OVERTIME available Higher positions and pay rates available for Leads and those with specialized skills and certifications \nCompany Description Since 1992, Tidewater Staffing, Inc. (TSI) has been providing unrivaled workforce solutions for our clients in the ship repair, warehousing, and light industrial/manufacturing industries. Through the years, we’ve dedicated ourselves to solving staffing challenges efficiently, economically, and with integrity by embodying our mission statement: “Put people to work. Do the right thing every day.” Since 1992, Tidewater Staffing, Inc. (TSI) has been providing unrivaled workforce solutions for our clients in the ship repair, warehousing, and light industrial/manufacturing industries. Through the years, we’ve dedicated ourselves to solving staffing challenges efficiently, economically, and with integrity by embodying our mission statement: “Put people to work. Do the right thing every day.”

Job Description Hire Virtue is recruiting on behalf of our client for an experienced Welder to support the installation, maintenance, and repair of natural gas pipeline systems. This position plays a critical role in ensuring the structural integrity and safety of pipeline infrastructure through high-quality welding practices performed in both field and shop environments. The ideal candidate has pipeline welding experience, a strong commitment to safety, and the ability to produce quality work that meets industry standards and ASME certification requirements. Key Responsibilities • Perform welding operations for the installation, maintenance, and repair of natural gas pipelines., • Operate welding equipment, torches, power supplies, and related tools to safely fuse metal components., • Perform arc welding by establishing and maintaining proper electrical circuits., • Assist with pipeline construction, repair, integrity maintenance, and emergency response activities., • Work effectively in both field and fabrication shop environments., • Successfully complete pipe welding tests required by gas utility companies in accordance with ASME certification requirements., • Maintain compliance with all company safety policies, industry regulations, and quality standards., • Inspect completed welds to ensure workmanship meets required specifications., • Collaborate with field crews, supervisors, and inspectors to complete projects safely and efficiently. Qualifications • High school diploma or GED required., • OQ (Operator Qualification) certification for pipeline welding preferred., • Minimum of three (3) years of pipeline or industrial welding experience preferred., • Ability to pass client-required pipe welding qualification tests., • Strong knowledge of pipeline welding techniques, welding procedures, and applicable industry standards., • Excellent communication and teamwork skills., • Demonstrated commitment to safety and quality workmanship., • Ability to remain calm and respond effectively during emergency situations. Physical Requirements • Ability to work extended hours, including days, nights, weekends, and overtime as project needs require., • Ability to frequently lift and carry up to 50 pounds., • Ability to stand, walk, bend, kneel, crouch, climb, reach, and work in physically demanding environments., • Ability to climb extension ladders and work at varying heights., • Willingness to travel to project sites, typically within a four-hour radius of the assigned home office., • Ability to work outdoors in changing weather conditions and around noise, vibration, heavy equipment, and other construction-related hazards. Why Join Our Client? • Competitive compensation, • Career advancement opportunities, • Comprehensive medical, dental, vision, disability, and life insurance beginning on your first day of employment, • Employer-sponsored 401(k) with company match, • Paid Time Off (PTO), • Employee Assistance Program (EAP), • Referral bonus opportunities, • Safety-focused, team-oriented work environment with long-term career growth If you're a skilled welder who takes pride in producing quality work and wants to build a long-term career in the natural gas pipeline industry, we'd like to hear from you.

Job DescriptionJob Opportunity: Structural Welder LEAD Staffing | Hampton Roads, VA Location: Hampton Roads, VA Schedule: Full-Time | Contract | 40 hours per week (Overtime as required) About the Role We are seeking an experienced Structural Welder to support shipyard operations in Hampton Roads, VA. This role involves performing structural welding on naval and commercial vessels using various welding processes in compliance with shipyard and naval specifications. Key Responsibilities • Perform structural welding using SMAW, FCAW, GMAW, and GTAW processes as required., • Weld ship hull structures, foundations, brackets, and other structural components., • Interpret and work from blueprints, weld symbols, and engineering drawings., • Ensure weld quality meets applicable codes, standards, and inspection requirements., • Perform fit-up and tack welding of assemblies prior to final welding., • Operate grinding, cutting, and gouging equipment., • Maintain welding equipment and work area in safe, clean condition., • Follow all shipyard safety procedures and welding quality standards. Requirements, • Minimum of 3 years of structural welding experience; marine or shipyard environment preferred., • Proficiency in multiple welding processes (SMAW, FCAW, GMAW preferred)., • Ability to pass welder qualification tests per applicable codes., • Strong blueprint and weld symbol reading ability., • High school diploma or GED required., • Must be willing to undergo background check and drug screening., • Ability to work overtime, weekends, and extended schedules as required., • Clean driving record required. Work Environment, • Shipyard and industrial settings, • Exposure to noise, heat, cold, confined spaces, and marine/industrial hazards, • PPE required at all times Job-Specific Interview Questions, • Describe your structural welding experience in a shipyard or marine environment., • Which welding processes are you certified or most experienced with?, • How do you prepare and fit up structural components prior to welding?, • What welding codes or standards are you familiar with (AWS, NAVSEA)?, • How do you ensure weld quality and minimize defects?, • Describe the most complex structural weld you have performed., • How do you handle distortion or warping of weldments?, • What safety precautions are most important when welding in confined spaces?, • How do you manage work priorities when multiple weld jobs are scheduled simultaneously?, • How do you communicate weld fit-up or design conflicts to supervisors? Why Work With LEAD Staffing, • Competitive pay based on experience, • Paid Sick Leave, • Holiday Pay (eligible after qualifying hours worked), • Medical, Dental, and Vision Insurance options, • Referral Bonus Program – earn a bonus for referring qualified candidates, • Consistent shipyard work with overtime opportunities, • Opportunity to work on complex naval and industrial projects, • Strong safety-first work culture Equal Employment Opportunity (EEO) LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender expression, genetic information (including characteristics and testing), military and veteran status, labor union affiliation, and any other characteristic protected by applicable law.

Job DescriptionHUTCO, INC. Position: Advanced Shipfitter / Fabricator (Multi-Pass Tack & Burn) Job Location: Newport News, VA Hutco Branch: Portsmouth Rate of Pay: $45.00 per hour, plus per diem for those who qualify Shift: Variable – All Shifts DESCRIPTION Hutco, Inc. is currently seeking experienced Advanced Shipfitters / Fabricators for shipbuilding work in Newport News, Virginia. Qualified candidates must have a minimum of 4 years of documented commercial or naval shipfitting experience. This position requires advanced structural fabrication, multi-pass tack welding, burning, heating, and the ability to interpret complex structural drawings and blueprints. REQUIRED EXPERIENCE & SKILLS • Minimum 4 years of documented commercial or naval experience as a First Class Shipfitter., • Proficient in multi-pass tack welding., • Experience using oxygen/propane burning and heating torches., • Ability to read and interpret complex structural assembly drawings, blueprints, weld symbols, and fractional dimensions., • Experience laying out, assembling, fitting, and replacing structural piece parts, hull inserts, and penetrations., • Experience working in physically demanding shipbuilding, marine, or heavy steel fabrication environments., • Familiarity with applicable shipbuilding OSHA safety requirements., • Experience using grinders, needle guns, and other vibratory tools., • Experience with air carbon arc gouging.WELDING QUALIFICATION All Shipfitters must successfully complete the Multi-Pass Tack Welder Qualification Test using the SMAW process with MIL-10718-M (A-5A) filler metal. Testing includes: • Vertical Up (3F) position, • Overhead (4F) position, • One-hour practice session, • One-hour Vertical Up test, • One-hour Overhead test, • Visual Inspection of Weld Level I assessment Candidates must be prepared to pass the required qualification testing without prior training at the Newport News welding school. PHYSICAL REQUIREMENTS • Frequently lift and carry up to 50 lbs., • Climb, crawl, stand, bend, and work in confined spaces., • Work in environments involving temperature and humidity extremes., • Work around fumes, odors, dust, and other normal shipyard conditions., • Use various hand and power tools., • Perform physically demanding work in tight or restricted areas.BENEFITS A limited benefit plan is available to Hutco, Inc. employees through Essential Staff Care. Available plans include: • Medical / Prescription, • Dental Coverage, • Vision Coverage, • Short Term Disability, • Term Life Benefits, • Accidental Death & Dismemberment Benefit Per diem is available for individuals who qualify. CONTACT HUTCO TODAY! Apply online or contact the Hutco Portsmouth Branch: 728 High Street, Suite 200 Portsmouth, VA 23704 Call: 757-223-7680 / 757-775-4448 Hutco, Inc. is an Equal Opportunity Employer (EOE). #HUTCOSP

Job Description Job Description: • Production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, Commercial Ships, and more., • Layout, fabricate or repair metal plate and/or structural parts brace them in position within hull of ship for riveting or welding according to specifications., • Measure, mark, and install metal plate for cutting per specifications, using tools such as saws, cutting torches, and more., • Fit and weld metal plate in the repair and/or construction of marine vessels and industrial components using gas welding, brazing, arc welding, wire fed welding, or TIG welding process and procedures., • Remove high spots and cut bevels using hand files, portable grinders, and cutting torches., • May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts using shop machinery such as plate rolls, presses, bending brakes, and joggle machines., • Weld components in a flat, vertical, or overhead positions., • Set up welding machines based on the job at hand., • Provide a great level of attention to detail and focus on the given task., • Keep work areas clean and organized and take proper care of all equipment and facilities., • Ensure work is done safely and meets quality standards., • Performs other duties as assigned. Candidate Requirements:, • Must have 5 years of recent experience working in a shipyard as a structural welder., • Must be able to pass all administered tests prior to being hired for the position., • Must possess a good general knowledge of ship repair procedures and test requirements., • Must possess a working knowledge of techniques., • Must be able to comprehend instructions, drawings, and general correspondence., • Must have a working knowledge of ship repair terminology and ship compartment naming convention., • Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards., • PPE may include hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc. Job Type: Full-time Pay: $24.00- $28.00 Per hour” “$140 Perdiem” NON LOCAL ONLY Ameri-Force Benefits As part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes:, • Industry Leading Pay, • Medical Coverage, • Dental Coverage, • Vision Coverage, • Short Term Disability Benefits, • Term Life Benefits, • Referral Bonuses Referral Bonuses are available for specific jobs only About Ameri-Force Since 1991, Ameri-Force has been a leader in skilled trades staffing, offering a people-focused approach that provides competitive advantages for our clients and rewarding career opportunities for our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace, industrial, and energy sectors, we ensure a seamless experience by efficiently managing federal and state taxes, unemployment, and worker’s compensation. In addition, we offer a comprehensive benefits package, including medical, dental, vision, short-term disability, and life insurance, tailored to meet the needs of our workforce. Join Ameri-Force and be part of a company that values your success. Learn more at ameriforce.com Note: The specific duties, skills and qualifications may vary depending on the company’s requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law.

Class Structural Welder - 2nd Shift - Steel America. As a 2nd Shift Welder at Steel America, a division of Colonna's Shipyard, Inc.

As a Structural Welder, you will be responsible for welding various metals on ships or in shops, supporting mechanical repairs, and leading assigned helpers. Structural Welder, with specific knowledge of. If you are a certified welder ready for your next challenge, apply today!.

Structural Welders J1- J4 to work night shift 3pm- 11pm. GUIDELINES FOR STRUCTURE WELDER.

This role involves fabricating, assembling, and welding metal components according to specifications and blueprints, ensuring structural integrity and precision. The combination fitter/welder plays a crucial role in the construction, repair, and maintenance of ships and marine structures. Assemble s

As a Structural Welder, you will be responsible for welding various metals on ships or in shops, supporting mechanical repairs, and leading assigned helpers. Structural Welder, with specific knowledge of. Candidates must pass the Structural Weld test (Stick and Flux Core) and know welding techniques

Perform structural welding in support of ship repair and fabrication projects. First Class candidates should be capable of passing structural butt weld tests in multiple positions.

Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. We are currently looking to hire a full-time Foreman/Tank Builder. Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project., • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders)., • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates "go-backs", rejected or sloppy work., • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time., • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.), • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR., • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed, • Utilizes experience and skills to identify opportunities for improvement of company practices and resources., • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports)., • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements., • Completes all necessary paperwork i.e. daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required., • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements: • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver's license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You'll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer.

Key Responsibilities: - Interpret blueprints and technical drawings to accurately weld structural elements - Operate a variety of welding equipment, including MIG, TIG, and stick welders - Perform electrical troubleshooting and repairs as needed - Ensure all work meets industry standards and safety

Job Description We are seeking experienced Structural Welders to join our team in Norfolk, Virginia. The Structural Welder will perform high-quality welding on structural steel, vessel components, plating, tanks, and other fabricated assemblies in accordance with customer specifications, drawings, welding procedures, and shipyard standards. The ideal candidate will have strong FCAW welding experience, solid knowledge of welding metallurgy and processes, and the ability to consistently produce quality welds in horizontal, vertical, and overhead positions. Required Qualifications: • U.S Citizenship required., • Minimum 3-5 years of journeyman-level welding experience., • Must be able to qualify in two gas-shielded FCAW welding processes: 71T-1 and 811N3, in three welding positions., • Weld structural plating, assemblies, fabricated components, castings, and forgings in accordance with customer specifications, drawings, and approved welding procedures., • Perform FCAW welding in multiple positions, including horizontal, vertical and overhead., • Perform other related duties as assigned, including duties that may become essential to the position. Assessment: • Carbon steel - FCAW (Flux Core Arc Welding), • Welding in horizontal, vertical, and overhead position (2G, 3G and 4G) with fillet, V-groove butt joints and ceramic tape backing., • All plates will be assessed using the bend and x-ray method. Unique / Additional Requirements: • Must be able to work all shifts and at heights., • Must show at least two years of continuous, stable and verifiable employment., • Construction or manufacturing background preferred and have strong mechanical skills., • Frequent carrying, pushing, pulling, standing, manual dexterity, reaching, seeing, hearing, occasional kneeling, reclining and finger dexterity., • Maintain safety awareness and ability to follow directions.

Job Description HUTCO, INC. Position: Structural Welder – Pulse Arc Job Location: Newport News Hutco Branch: Portsmouth VA Rate of Pay: $45 per hour (perdiem Available for those who qualify) Work Schedule: 40 hours/week – All Shifts Security Clearance: Not Required Position Overview We are seeking highly skilled Structural Welders (Pulse Arc certified) for long-term shipyard work in Newport News, VA. Candidates must have extensive experience with multi-pass welding processes and the ability to pass all position weld tests without training. Essential Duties & Responsibilities • Perform all-position fillet and butt welds using:, • SMAW (Shielded Metal Arc Welding), • GMAW (Gas Metal Arc Welding), • FCAW (Flux Core Arc Welding), • GMAW-P (Pulse Arc Welding), • Use oxygen/propane heating torches, • Air carbon arc gouging, • Follow OSHA safety protocols for confined spaces, fall protection, and PPE use, • Work in demanding physical environments (e.g., shipboard, confined spaces, heights, staging) Required Experience & Skills • Minimum 4 years of structural welding experience at NNS or naval shipyards, • Skilled in:, • All-position welds: 2G, 3G, 4G with SMAW, FCAW, and GMAW-P, • Using fillet and butt weld gauges, • Air Carbon Arc Gouging, • Must pass:, • Visual Inspection of Welds Level I, • Welders Vision Test, • Carbon Arc Gouging Proficiency, • Mandatory: Pass weld qualification tests on-site at Newport News Welding School Mandatory Safety Training & Qualifications Leased Labor Provider must supply proof of completion/documentation for: • Confined Space Training – OSHA 29 CFR 1915, • Hazard Communication – OSHA 29CFR 1915.1200, • Respirator Fit Test & Medical Clearance (MSA Comfo Classic only), • Fall Protection – 4-D Body Harness, Lifelines, Beam Clamps (ANSI Z359.1 compliant), • Audiometric Testing & Hexavalent Chromium Clearance, • Coveralls – Flame Resistant with long sleeves, • Welding Shield Leather Bib and Full Jacket Required PPE (Provided by Supplier) • White Hard Hat (with company name and worker’s last name), • ANSI Z87 Safety Glasses with side shields, • 8” steel-toe safety boots or leather shoes with spats, • Bilsom Leightning L1N Muff-Style Hearing Protection, • MSA Comfo Classic Respirator, • Flame-resistant coveralls and full welding jacket, • Welding shield leather bib Special Requirement ✅ All candidates must pass the Pulse Arc weld test before assignment. ❗ No training provided prior to testing — must be test-ready. Benefits Hutco Inc. offers limited benefit coverage through Essential Staff Care. The hotel is advanced for the first two weeks (loan). Available plans include: • Medical / Prescription, • Dental, • Vision, • Short-Term Disability, • Term Life, • Accidental Death & Dismemberment To Apply CONTACT HUTCO TODAY! ???? Apply in person or online at our Portsmouth Branch: 728 High Street, Suite 200 Portsmouth, VA 23704 ???? Email resumes to: nnrecruiter@hutcoinc.com ???? Call us at: (757) 223-7680 Hutco, Inc. is an Equal Opportunity Employer (EOE). #HUTCOSP

Job DescriptionPosition Overview Structural & Mechanical Inc. is seeking a skilled Aluminum TIG Welder to join our fabrication and field services team. This role is responsible for performing high-quality TIG (GTAW) welding on aluminum components, ensuring structural integrity, precision, and compliance with project specifications. The ideal candidate has strong fabrication experience, attention to detail, and the ability to work both independently and as part of a team in a fast-paced industrial environment. Key Responsibilities • Perform TIG (GTAW) welding on aluminum materials for structural and mechanical applications, • Read and interpret blueprints, drawings, and weld symbols to determine specifications and tolerances, • Fabricate, fit, and assemble aluminum components and structures, • Inspect welds to ensure quality, strength, and adherence to standards, • Set up and maintain welding equipment, shielding gas, and tools, • Troubleshoot welding issues such as distortion, porosity, and overheating, • Perform repairs, modifications, and rework on existing components, • Maintain a clean and safe work environment and follow OSHA safety standards, • Collaborate with engineers, supervisors, and team members to meet project deadlinesRequired Qualifications, • 2+ years of experience in aluminum TIG welding (GTAW), • Strong understanding of aluminum properties and welding techniques, • Ability to read blueprints, schematics, and fabrication drawings, • Experience with fabrication tools (grinders, saws, measuring tools, etc.), • Ability to weld in multiple positions with high precision, • Strong attention to detail and quality workmanshipPreferred Qualifications, • Experience in structural or industrial fabrication environments, • MIG welding experience (aluminum or steel), • Welding certifications (AWS, ASME, or equivalent), • Experience working in both shop and field environmentsPhysical Requirements, • Ability to lift up to 50 lbs, • Ability to stand, bend, and work in confined or elevated spaces, • Comfortable working in shop and outdoor environmentsCompensation & Benefits, • Competitive pay based on experience, • Health, dental, and vision insurance, • Paid time off and holidays, • Opportunities for overtime and career advancementWhy Join Structural & Mechanical Inc.? Structural & Mechanical Inc. delivers high-quality fabrication and mechanical solutions across a range of industrial projects. Joining the team means working on diverse, hands-on projects with opportunities to grow your welding and fabrication expertise in a collaborative environment. Powered by JazzHR nCDTURnwRQ

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR TxVtZidONc

General Labor, Sorter, Entry Level – We’re hiring General Laborers / Sorters to sort recyclables at a large recycling and processing plant in Chesapeake, VA.Sorting recyclables is not a glamorous job but it’s a necessary one that helps keep our community clean.This position does not require a

Welder, Combination, Maintenance.

You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.

Visits may require standing on various surfaces at differing angles, bending over, crouching, and climbing obstructions such as scaffolding, ladders, and internal barge and boat structural members. If you are a certified welder ready for your next challenge, apply today!. We seek a detail-oriented,

Assemble structural parts and frames according to blueprints and specifications. Class Combination Fitter/Welder - 2nd Shift - Steel America. As a 2nd Shift Combination Fitter/Welder at Steel America, a division of Colonna's Shipyard, Inc.

Must possess knowledge and experience in the set up and operation of machines and tools to include: mig welder, tig welder, plasma arc cutter, gas cutter, carbon arc cutter, bandsaw, drill press etc. Position Title: Welder II, III. Summary of duties - The Welder applies appropriate welding processes

Structural Welders J1- J4 for the day shift 6 am - 2:45pm with a 45 minute lunch. The Structural Welder should be able to weld using SMAW, GMAW and FCAW welding process. GUIDELINES FOR STRUCTURE WELDER.

Must possess knowledge and experience in the set up and operation of machines and tools to include: mig welder, tig welder, plasma arc cutter, gas cutter, carbon arc cutter, band-saw, drill press etc. May act as structural team leader where skills are prevalent and required. Position Title: Welder I

Perform all duties on an expert and professional level while being able to mentor 2 nd and 3 rd class welders to minimize rework and maintain on-time and first-time quality.

Welder, Combination, Maintenance.

Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment.

As a Pipe Welder at Colonna's Shipyard, Inc. The pipe welder plays a key role in ensuring that piping systems on vessels meet stringent safety and performance standards. Must have at least 5 years of experience working as a pipe welder, preferably in a shipyard or marine environment; or have graduat

Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment.

You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.

Must possess knowledge and experience in the set up and operation of machines and tools to include: mig welder, tig welder, plasma arc cutter, gas cutter, carbon arc cutter, bandsaw, drill press etc. Position Title: Welder II, III. Summary of duties - The Welder applies appropriate welding processes