System one jobs in Pasadena, TexasCrear alertas

Job Description Overview Cashiers are to greet and thank every customer who enters and leaves the store. Cashiers must be proficient in all aspects of the Cavender’s Boot City cashiering system and knowledgeable of all paperwork associated with each cashiering entry. Cashiers are also responsible for keeping the store neat and clean, and must always answer the phone with an enthusiastic response and professional manner. Cashiers will support our management staff with miscellaneous tasks like stocking, visual displays, special orders, and all basic house-keeping needs. Duties and Responsibilities • Support the “Cavender’s Culture” and drive our Mission, Vision, and Values, • Perform cashiering tasks accurately and efficiently, • Keep work area neat, clean, and organized, • Be knowledgeable about CBC policies and procedures, • Be knowledgeable of all CBC cashiering transactions:, • Cash Sales, • Check Sales, • Non-taxable sales, • Credit Cards, • Voids, • Exchanges, • Enter all sales and monies in register at time of sale, • Help stock merchandise and straighten store as needed, • Suggest possible add-on purchases to the customer and promote store specials, • Report to work promptly, neatly groomed, and appropriately attired, • Be security conscious at all times, • Provide knowledgeable responses to phone inquiries (e.g. sales, promotions, store location, price, and inventory), • Keep updated on sale promotions (items/prices/etc.), • Practice inventory control on boots, • Check for boot mis-mates, • Follow the company policy on all commission sales; validate all sales tickets, • Perform all other miscellaneous duties as assigned, • Job requires associate to raise or lower objects from one level to another regularly during shift, • Ability to comprehend basic instructions, • Ability to interpret documents, • Ability to apply abstract principles to a wide range of complex tasks, • Ability to understand the meanings of words and effectively respond, • Ability to analyze information and write reports, • Associate must be able to read English., • Associate must be able to understand English, • Associate must be able to stay alert during work hours assigned Cavender’s is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, military status, national origin, sex, ancestry, age, sexual orientation, pregnancy, disability, genetic information, or any other personal characteristic protected under federal, state, or local law. Cavender’s will provide reasonable accommodations for persons with a disability upon request. If you have a disability and need assistance completing the application, please call Customer Service at (888) 361 – 2555 or visit your nearest Cavender’s store.

Job DescriptionBilingual Shelter Advocate • Full Time/Non-Exempt: 36-hours a week, • Schedule:, • Wednesday through Saturday, 8:30 am to 5:30 pm, four 9-hour shifts per week, with one random flex day, • Associate’s/Bachelor’s degree preferred, preferably in social sciences field. In lieu of educational requirement, High School Diploma/GED with a minimum of one year’s experience in social services or customer related field., • Bilingual; English/Spanish., • Must rotate on-call responsibility a minimum of approximately 2-3 24-hour shifts per month to provide accompaniments to victims of FV/SA at local hospitals, police departments, schools, etc., • Knowledge of the dynamics of sexual and domestic violence, laws related to sexual and domestic violence and an overview of legal system., • Ability to establish rapport and work with at-risk populations., • Must pass criminal background investigation check, • Must pass drug screen, • Must provide and maintain current TX Driver’s License, • Must provide and maintain clean driving record and annually update driving record, • Must provide and maintain current auto liability insurance oKrgntvijt

Job Description Position Summary Thompson Engineering is seeking a highly motivated and experienced Construction & Geotechnical Materials Laboratory Manager to lead and manage laboratory operations supporting construction and geotechnical testing services. This role is responsible for overseeing laboratory personnel, equipment, quality systems, and safety practices to ensure accurate, timely, and compliant testing of soils, aggregates, concrete, asphalt, and related materials. The Laboratory Manager plays a critical role in maintaining Thompson's quality standards, supporting business objectives, and developing high-performing teams. Key Responsibilities Laboratory Operations & Quality • Coordinate and manage daily operations of the construction and/or geotechnical materials laboratory to ensure testing services are performed safely, accurately, and on schedule., • Ensure all laboratory activities comply with Thompson Engineering's Quality Program, Quality Management System (QMS), project specifications, and applicable industry standards., • Develop, implement, and maintain laboratory-specific procedures that align with company quality and operational requirements., • Oversee proficiency testing programs and ensure compliance with A2LA, AASHTO, USACE, ISO 17025, R18, and other applicable accreditation standards., • Lead, supervise, and mentor laboratory personnel; ensure staff are properly trained, equipped, and supported to perform their duties safely and effectively., • Evaluate employee performance and support professional development and career growth in accordance with company policies., • Assist with recruiting, hiring, onboarding, and training of laboratory staff to meet current and future workload demands., • Oversee efficient utilization of laboratory facilities, equipment, and resources; identify and request additional resources as needed., • Ensure proper calibration, maintenance, and operation of all laboratory testing equipment., • Collaborate with Office and Department Management in the preparation of proposals, quotations, and cost estimates for laboratory testing services., • Ensure accurate scope definition, manpower planning, and pricing to support profitability and client expectations., • Supervise laboratory administrative functions, including report preparation, documentation, and client deliverables., • Ensure compliance with company administrative requirements such as timekeeping, expense reporting, and purchasing procedures., • Lead laboratory safety initiatives and promote a strong safety culture through pre-task planning, training, and active oversight., • A proactive leader with a strong sense of ownership, accountability, and attention to detail., • A quality-focused professional committed to accuracy, compliance, and continuous improvement., • A safety-minded manager who leads by example and prioritizes employee well-being., • A collaborative team builder who can develop talent and manage laboratory operations efficiently. Education & Experience (One of the following): • Bachelor's degree in a STEM-related field with 3+ years of experience in construction and geotechnical materials laboratory testing; or Certification by recognized national, regional, or state authorities (or equivalent in-house certification) in one or more of the following areas: • Concrete, • Aggregates, • Soil and rock, • Valid driver's license with an acceptable driving record., • Strong leadership, organizational, and communication skills., • Demonstrated ability to manage laboratory operations while maintaining quality and safety standards.

Job DescriptionJoin the Alpine Legacy Group Win Big. Lead Boldly. Leave a Legacy. At Alpine Legacy Group, we do more than provide supplemental insurance — we develop people. We help protect families, grow leaders, and build careers grounded in hard work, integrity, and ownership. We move with intention, aim for excellence, and take pride in every success. We’re expanding into new markets and looking for self-driven people who want more — more growth, more freedom, and more impact. The Role As a Sales Professional, you’ll earn while you learn. Our training is all-in — real field experience, personal mentorship, and hands-on coaching from proven leaders. We’ll teach you the system, sharpen your skills, and push you to become elite. You’ll own your local territory — building relationships with business owners, running meetings, and helping families secure real financial protection. What You’ll Do * Build a client base through in-person meetings, referrals, and networking. * Present, close, and follow through — from first handshake to lifelong client. * Use our CRM to track leads, manage activity, and grow your book of business. * Stay plugged in with your team and leader — we win together. * Set goals, hit them, and raise the bar again. What It Takes * You love to win and hate to lose. * Confident, coachable, and relentless. * Disciplined with your time and committed to personal growth. * Athletic, leadership, or competitive background? That’s a huge plus — our top performers come from that world. Requirements * Clean background check, valid driver’s license, and reliable transportation. * Active Health & Life License (or ready to get one — we’ll help and reimburse fees). * Bachelor’s degree or solid work experience with a drive to succeed. Compensation & Perks * Weekly draw + uncapped commissions — you control your paycheck. * Monthly cash bonuses, quarterly stock shares, and vested renewals. * Paid incentive trips for top producers — win your way to elite destinations. * Health, dental, and vision benefits after 60 days. * Promotions based purely on performance — no waiting in line. * A winning culture built on competition, camaraderie, and growth. Join a team of winners. Build your legacy.

Job DescriptionJob Title: Quality Assurance Analyst (Oracle Applications) Location: Houston, TX Shift: Day Shift Position Overview We are seeking an experienced Quality Assurance (QA) Analyst with strong expertise in Oracle application testing to support enterprise systems. This role focuses on defining and executing QA strategies, leading testing efforts, and ensuring the quality, reliability, and performance of Oracle-based solutions. The ideal candidate has experience working in complex environments and can lead testing initiatives from planning through execution. Key Responsibilities * Lead and execute QA testing strategies for Oracle-based applications * Develop and maintain test plans, test cases, test scripts, and test scenarios * Perform functional, integration, system, regression, and user acceptance testing (UAT) * Validate Oracle modules and integrations to ensure business and technical requirements are met * Identify, document, track, and manage defects through resolution * Collaborate with developers, business analysts, and stakeholders to understand requirements and testing scope * Ensure testing standards, best practices, and quality processes are followed * Provide test status reports, defect metrics, and quality assessments to project teams and leadership * Support continuous improvement of QA processes and testing methodologies Required Skills & Experience * Proven experience as a QA Analyst or QA Lead in Oracle testing environments * Strong knowledge of Oracle application testing strategies * Hands-on experience testing enterprise systems and integrations * Experience creating and executing manual test cases (automation experience is a plus) * Strong analytical, troubleshooting, and documentation skills * Ability to work independently and lead QA efforts with minimal supervision Preferred Qualifications * Experience testing Oracle modules such as Financials, HCM, or SCM * Familiarity with integration testing and data validation * Experience working in large enterprise or public-sector environments * Exposure to test management tools and defect tracking systems For more details reach at . About Navitas Partners, LLC: It is a certified WBENC and one of the fastest-growing Technical / IT staffing firms in the US providing services to numerous clients. We offer the most competitive pay for every position. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job Description Title: Senior Electrical Maintenance Specialist Location: Pasadena, TX Who we are: Voted one of the Nation's Best and Brightest Companies to Work for, Kuraray America, Inc. (KAI) is a global leader in specialty chemical, fiber, and resin production. With top-of-the-line research and production facilities and a vast network of supplies from around the world, Kuraray leads the industry in specialty dental, fiber, resin, and elastomer products. Kuraray America is a wholly owned subsidiary of Kuraray Company, Ltd. Based in Tokyo, Japan. Kuraray has operations in 32 countries and employs more than 11,000 employees, including over 800 in the United States. Why Kuraray: Kuraray is building a better tomorrow, today. Our team members are dedicated to expanding our business with committed professionals who share essential values such as integrity, excellence, teamwork, and accountability. As a part of Kuraray America, Inc., our team shares the advantages of working for the leader in specialty chemicals, resins, and fibers. Our international presence and resources allow us to be a world-leading innovator in the industries we service. Yet, despite our size, our people are more than just a number. As a new team member, you can expect to earn responsibility quickly. Our commitment to our people is visible in our comprehensive benefits package. As a Kuraray team member, you will have the opportunity to enjoy competitive salaries and benefits, incentive opportunities, and an excellent work environment. Position Summary: The Senior Electrical Maintenance Specialist provides advanced technical expertise in maintaining, troubleshooting, and improving the plant's electrical, instrumentation, and control systems to ensure safe and reliable operations. This hands-on role supports daily maintenance activities, assists with reliability improvements, and serves as a technical resource for the operations and maintenance teams. The position requires strong problem-solving skills, practical knowledge of industrial electrical systems, and the ability to work independently in a fast-paced chemical manufacturing environment. Responsibilities: Maintenance & Troubleshooting • Perform advanced troubleshooting, repair, and maintenance of electrical and instrumentation systems, including motors, drives, MCCs, transformers, sensors, analyzers, and control devices., • Support troubleshooting of process control systems (DCS, PLCs) and related field instrumentation., • Lead and assist in diagnosing complex electrical and instrumentation issues impacting plant operations., • Support reliability initiatives through preventive and predictive maintenance programs, inspections, and system improvements., • Install, calibrate, and maintain instruments, control valves, transmitters, and analyzers., • Maintain and troubleshoot low- and medium-voltage electrical equipment, control panels, starters, and VFDs., • Read and interpret electrical and instrumentation drawings, loop sheets, and wiring diagrams., • Ensure work complies with plant safety standards and applicable codes (NEC, NFPA 70E, ISA)., • Provide first-line support for DCS troubleshooting, loop tuning, and basic configuration updates under engineering direction., • Maintain DCS-related field connections and signals (4-20 mA, Foundation Fieldbus, Profibus, Modbus, wireless)., • Participate in root cause failure analyses and implement corrective/preventive actions., • Recommend improvements to enhance reliability, safety, and equipment life cycle., • Support updates to equipment documentation, PM procedures, and technical standards., • Promote and ensure compliance with all plant safety, environmental, and quality standards., • Participate in safety reviews, job hazard analyses, and incident investigations., • Share technical expertise and mentor maintenance technicians to build team capability., • High school diploma or equivalent, • Minimum of 7 years of experience in electrical and instrumentation maintenance within a chemical, refining, or industrial manufacturing environment., • Strong working knowledge of electrical systems (low/medium voltage), drives, MCCs, and instrumentation., • Experience troubleshooting DCS and PLC systems (Yokogawa experience preferred)., • Proven ability to read and interpret electrical drawings, schematics, and loop diagrams., • Solid understanding of preventive and predictive maintenance practices, • Familiar with PSM concepts such as MOC and safe work permitting., • Ability to work independently, prioritize tasks, and respond to urgent issues after hours when required., • Strong commitment to safety and continuous improvement. Valid driver's license required. Competencies: • Customer Focus, • Building strong customer relationships and delivering customer-centric solutions., • Business Insight, • Applying knowledge of business and the marketplace to advance the organization's goals., • Cultivates Innovation, • Creating new and better ways for the organization to be successful., • Action Oriented, • Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm., • Ensures Accountability, • Holding self and others accountable to meet commitments., • Drives Results, • Consistently achieving results, even under tough circumstance, • Collaborates, • Building partnerships and working collaboratively with others to meet shared objectives., • Values Difference, • Recognizing the value that different perspectives and cultures bring to an organization, • Communicates Effectively, • Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences., • Courage, • Stepping up to address difficult issues, saying what needs to be said., • Instills Trust, • Gaining the confidence and trust of others through honesty, integrity, and authenticity., • Situational Adaptability, • Adapting approach and demeanor in real time to match the shifting demands of different situations. We offer a competitive compensation package that includes base pay and an annual incentive. This program is designed to reward individual performance and align overall rewards with corporate and team performance. Our employees benefit from a robust healthcare package that includes wellness reimbursements, along with generous perks such as three weeks of paid time off, ten company holidays, paid parental leave, education reimbursement, and a matching 401k plan, among other offerings. Applicants must be authorized to work for ANY employer in the U.S. Learn more at kuraray.us.com/careers/ Kuraray America, Inc. is an Equal Employment Opportunity/disability/protected veteran status No third-party candidates accepted. Job Posted by ApplicantPro

Job DescriptionJob Title: Application Analyst Location: Houston, TX Position Type: Contract Position Overview The Application Analyst is responsible for conducting moderate to complex analytical work within the assigned functional area. This includes monitoring resources, evaluating system and business processes, and analyzing historical data trends to ensure optimal departmental efficiency and effectiveness. Submission of a candidate for this role confirms the individual’s agreement to comply with all organizational policies and procedures, adhere to contractual terms, and meet all required qualifications and specialty experience for the position. Key Responsibilities * Perform complex analysis related to enterprise applications and financial systems * Monitor resource utilization and assess system/process efficiency * Evaluate and present historical data and trends to support operational and strategic decisions * Support metadata governance and master data management initiatives * Collaborate with cross-functional teams including Finance, Supply Chain, HR, and IT * Design, build, and maintain enterprise metadata solutions to support downstream systems * Ensure consistency, accuracy, and compliance of metadata across integrated platforms * Participate in system enhancements, automation, and continuous improvement initiatives Required Skills & Experience * Strong accounting background, with understanding of: * Profit & Loss statements * Balance sheet structures * General Ledger (GL) segments * Metadata-driven reporting and financial close processes * Deep expertise in Oracle Enterprise Data Management Cloud Service (EDMCS) configuration to enforce business rules and reduce metadata errors * Hands-on experience with the Oracle EPM stack, including: * EDMCS * EPM Data Integration * Supporting technologies such as SQL, PL/SQL, Groovy, JSON, and APIs * Experience building and automating EDMCS exports and extracts using APIs * Experience coordinating with Oracle Integration Cloud (OIC) to streamline end-to-end metadata deployment processes * Proficiency in Oracle EDMCS solution design and development, including: * Viewpoints * Node types * Data mappings * Subscriptions * Validations * Workflows supporting multiple downstream systems Preferred / Additional Skills * Ability to provide master data management (MDM) support for: * Supply Chain systems * Human Capital Management (HCM) systems * Experience working in large, complex enterprise environments For more details reach at . About Navitas Partners, LLC: It is a certified WBENC and one of the fastest-growing Technical / IT staffing firms in the US providing services to numerous clients. We offer the most competitive pay for every position. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job Description Elevate Your Real Estate Career with Corcoran Prestige Realty! Join our vibrant team and unlock exceptional growth opportunities. At Corcoran Prestige Realty, we provide you with the essential tools and steadfast support to excel in the real estate industry. Our rapid expansion means we have more leads than we can handle, offering you a unique opportunity to thrive. Our state-of-the-art systems are designed for success. With a tech-forward approach and robust lead generation, we empower agents to connect with genuine buyers and sellers, making us one of the industry's fastest-growing teams. Why Choose Corcoran Prestige Realty? Consistent Lead Flow: Say goodbye to chasing leads. We provide a continuous stream of high-quality leads, allowing you to focus on closing deals. Robust Support Network: Gain direct access to leadership, coaching, and marketing resources to maintain your momentum. Transaction Assistance: We handle the backend paperwork, enabling you to focus on client relationships. Proven Lead Training: Learn to convert leads into clients and successful closings with our comprehensive training system. Are You the Perfect Fit for Corcoran Prestige Realty? • Self-Motivated: You bring energy and drive to build a thriving real estate business., • Client-Centric: You excel at helping clients and fostering relationships that lead to repeat business., • Team-Oriented: You understand that success is achieved through collaboration and commitment. Your Responsibilities as a Real Estate Agent: • Engaging with Leads: Follow up and maintain contact with buyers and sellers to create new opportunities., • Building Client Relationships: Understand each client's needs to guide them confidently forward., • Guiding Transactions: Provide expert advice and support clients throughout the entire process., • Conducting Property Showings: Schedule and conduct showings to help buyers make informed decisions., • Managing Contracts and Deals: Oversee timelines and tasks to ensure deals stay on track., • Expanding Your Network: Utilize your skills to reach more clients and grow your business., • Staying Informed: Keep abreast of local market trends to provide valuable insights to your clients. What We Seek: • Tech-Savvy: Eager to learn and utilize digital tools that simplify your work., • Effective Communicator: Skilled in connecting, negotiating, and following up with clarity and precision., • Driven and Goal-Oriented: You set ambitious targets and consistently work towards achieving them., • Organized and Efficient: Adept at managing your time and staying on top of tasks., • Active Real Estate License (Required): A valid license is essential to work as an agent. While others slow down, we're accelerating our growth—and we're eager to welcome more agents ready to grow with us. Apply now and discover the possibilities with Corcoran Prestige Realty. Job Type: Full-time Pay: $48,226.91 - $196,492.21 per year Benefits: Flexible schedule Schedule: Monday to Friday Self-determined schedule Weekend availability Supplemental pay types: Bonus pay Commission pay

Job Description Schutz Container System, a Global Packaging company is searching for a Recondition Returns Logistics Sales Representative ( RECO Sourcing Specialist. Full time & Onsite Role Summary: is a sales role focused on sourcing returned IBC cages for inspection, repair, and reconditioning to a like-new state, often at a discounted price; their responsibilities include identifying potential returners, promoting the benefits of returning products for refurbishment, and managing the sales process for returned items, including buyback programs, while ensuring customer satisfaction and maximizing revenue from returned inventory. Key Responsibilities: • Oversee and analyze return trends to recover lost inventory., • Actively seeking out potential returners interested in returning IBC cages through various channels such as: Customer referrals, online listings, customer databases, and outreach campaigns., • Addressing customer concerns, resolving issues related to returned products, and ensuring a positive post-sale experience., • Possessing in-depth understanding of the reconditioning process, product specifications, and any potential limitations of raw material items to accurately answer customer inquiries., • Monitoring market trends and competitor activity to identify potential return opportunities for reconditioned products., • Identify, establish, and maintain new raw material sources to drive business growth., • Generate and present monthly reports detailing account activity, new opportunities, and lost accounts., • Candidate will be required to work 80% office and 20% out in the field looking for new vendors and meeting with existing vendors, • Coordinate with supply chain and SCS customer service personnel to support Canadian and US Operations, • Assist plant personnel as needed with any container return issues, • Ensure returners comply with regulatory guidelines for IBC / drum returns (DOT,EPA,UN, etc), • Support to the Operation management team with report request, ensuring timelines and accuracy, • Manage existing supplier relationships, fostering collaboration, and ensuring long-term partnerships., • Proven track record of successful sales performance, including lead generation, closing deals, and exceeding sales targets., • Excellent communication and interpersonal skills to build rapport with customers and address their concerns effectively., • Experience with reverse logistics which encompasses the processes of managing returned products, recycling materials, and ensuring proper disposal, offering opportunities for cost reduction, improved customer satisfaction, and enhanced sustainability., • Understanding market dynamics, trends, and supplier landscapes to identify potential sources and assess their capabilities., • Ability to effectively identify, evaluate, and select suppliers and returners, ensuring quality, cost-effectiveness, and alignment with organizational needs., • Aptitude to promote a business or service that offers a wide variety of products or services, allowing customers to complete multiple tasks or needs in one place, simplifying their experience and potentially saving time and effort., • Strong problem-solving and analytical abilities., • Proven ability to negotiate competitive pricing for material returns (with pre-approval)., • Excellent organization and multitasking skills., • Detail-oriented with a commitment to accuracy., • Strong team player with effective communication skills., • Safety and compliance experience which involves understanding and adhering to regulations, standards, and best practices to ensure a safe working environment, minimize risks, and protect employees and the public., • Be part of an innovative and growing industry leader., • Work in a collaborative and dynamic environment., • Competitive salary with opportunities for professional growth.Company DescriptionSchuetz Container Systems is a world-class leader in the manufacturing of industrial containers across multiple business lines. In addition, our sister company, Cardinal Container Systems, reconditions industrial packaging for use in a wide range of commercial applications. A vital part of this process involves the collection and return of used containers that can be reconditioned in our state of the art factories and reused by our diverse customer base.Schuetz Container Systems is a world-class leader in the manufacturing of industrial containers across multiple business lines. In addition, our sister company, Cardinal Container Systems, reconditions industrial packaging for use in a wide range of commercial applications. A vital part of this process involves the collection and return of used containers that can be reconditioned in our state of the art factories and reused by our diverse customer base.

Job Description Our company is currently seeking an AP/AR Clerk to join our team! You will be responsible for preparing and examining financial records for our company. Responsibilities for AP Clerk • Perform Accounts Payable functions in an accurate and timely manner daily., • Perform Accounts Receivable functions in an accurate and timely manner daily., • Conduct reconciliation of all bank accounts on an as needed basis, • Maintain and balance the cash flow ledger in an accurate and up to date manner., • Perform all activities related to the accounts payable function including reviewing, coding, and processing payments to vendors and customers., • Perform account receivable functions including invoicing, deposits, collections, and revenue recognition., • Prepare financial reports through collection, analysis, and summarization of data., • Interpret and apply accounting policies, rules, and regulations to all work to ensure compliance with applicable standards., • Collect and sort invoices and checks., • Keep a thorough record of business transactions and enter data from daily work logs into the company’s general ledger system., • Supporting supervisory and executive staff by performing any assigned accounting and clerical tasks, • Keep a thorough record of all company charges, as well as any refunds that have been issued., • Keep track of any consumer issues that require a refund and make sure that the refunds are issued in a timely manner., • Assist senior accounting personnel with any tasks conducted within the accounting department, or any tasks that require accounting personnel to take part., • Key in or type up any documents or items that the accounting department is responsible for, including checks and invoices, as well as vouchers, accounting statements, and other reports and records., • Match work orders to invoices., • Process invoices/bills so that they can be paid., • Contact customers to notify them of delinquent accounts and accept any payments made at the time of contact., • High School Diploma, • Bachelor’s degree in accounting, Finance, or related field a plus, • 3-5 years relevant experience working in accounting or bookkeeping environment., • Strong verbal and written communication skills, • Proficient skills in QuickBooks and Microsoft Excel, • Experience with accounts payable, accounts receivable, payroll, and general ledger, • High degree of accuracy and attention to detail, • Able to multitask and work independently with little supervision., • The ability to meet deadlines., • Exceptional organization skills, • Excellent data entry skills, • 40 hours work week with some limited overtime in some cases., • Punctual, Reliable, and dependable individual, • Reliable transportationCompany DescriptionRCS Personnel is a staffing company who works with customers seeking to fill their skilled, light industrial and administrative positions. We offer terms from temporary, temp-hire & direct hires. Visit one of our branches to see how we can assist you. Here is the link to register with us . Once the application is made, you will need to bring your valid government-issued ID so that we can activate your profile. Most people bring their TX driver's license/ID with a social. Once the application is complete, we can then determine where we can place you, based on your work history and background check. Please let us know when your application is complete. Our office is located at 8005 East Freeway St. Houston Tx 77029 and our office number is 713-675-0626. If you have any questions, please reach out to us.RCS Personnel is a staffing company who works with customers seeking to fill their skilled, light industrial and administrative positions. We offer terms from temporary, temp-hire & direct hires. Visit one of our branches to see how we can assist you.\r\n\r\n Here is the link to register with us . Once the application is made, you will need to bring your valid government-issued ID so that we can activate your profile. Most people bring their TX driver's license/ID with a social. Once the application is complete, we can then determine where we can place you, based on your work history and background check. Please let us know when your application is complete. Our office is located at 8005 East Freeway St. Houston Tx 77029 and our office number is 713-675-0626. If you have any questions, please reach out to us.

Job Description The Monica Foster Team is a top 100 team in the U.S. and trusted Zillow Preferred (formerly Flex) partner, one of the first and the highest producing in Houston —and we’re looking for licensed agents who are ready to plug into a consistent stream of high-converting buyer and seller leads. You’ll work in a remote-ready, cutting-edge tech and automation-supported environment where your job is to connect, consult, and close - with the full backing of a team built for modern real estate success. We give you more than a job, we provide you the opportunities to BUILD A CAREER. What You’ll Get: • Exclusive Zillow leads—live, ready-to-act buyers and sellers to fill your pipeline, • Access to a database of over 50,000 leads, • A Team Leader and Broker with 20+ years of experience supervising or executing 4500+ transactions, • A fully remote-capable business model, no office requirement, • Powerful CRM, tools and AIRE (Automation Intelligence for Real Estate system custom built by a former NASA engineer) to streamline follow-up, focus on being a real estate professional, and increase your amount of closings, • Dedicated transaction support from the best personnel and process in the industry, • Dedicated lead support staff, • Ongoing coaching and lead conversion training, • Collaboration, education and support from a high-performance team including, but not limited to, sponsors, trainers, leaders, and mentors, • A team with a proven track record of success unmatched by competitors What You Bring: • Active real estate license, • A strong work ethic and desire to succeed, • Strong communication and client consultation skills, • Coachability, • Ability to plug into team systems and processes, • Schedule availability and flexibility Compensation: • Commission-based with performance incentives, • $80K–$250K+ based on volume Schedule: • Flexible, but responsiveness is key, • Regular coaching and check-ins Benefits: • Health Insurance, • Revenue Share, • Profit Share (subject to market conditions), • Stock Awards, • Showing Agent pay, • Professional Development If you're looking for a team that invests in your growth and delivers real opportunities, apply now to join The Monica Foster Team and discover the difference the Monica Foster Team and Zillow can make.

Job Description Title: Electrical Maintenance & Reliability Engineer Location: Pasadena, TX Who we are: Voted one of the Nation's Best and Brightest Companies to Work for, Kuraray America, Inc. (KAI) is a global leader in specialty chemical, fiber, and resin production. With top-of-the-line research and production facilities and a vast network of supplies from around the world, Kuraray leads the industry in specialty dental, fiber, resin, and elastomer products. Kuraray America is a wholly owned subsidiary of Kuraray Company, Ltd. Based in Tokyo, Japan. Kuraray has operations in 32 countries and employs more than 11,000 employees, including over 800 in the United States. Why Kuraray: Kuraray is building a better tomorrow, today. Our team members are dedicated to expanding our business with committed professionals who share essential values such as integrity, excellence, teamwork, and accountability. As a part of Kuraray America, Inc., our team shares the advantages of working for the leader in specialty chemicals, resins, and fibers. Our international presence and resources allow us to be a world-leading innovator in the industries we service. Yet, despite our size, our people are more than just a number. As a new team member, you can expect to earn responsibility quickly. Our commitment to our people is visible in our comprehensive benefits package. As a Kuraray team member, you will have the opportunity to enjoy competitive salaries and benefits, incentive opportunities, and an excellent work environment. Position Summary: The Electrical Maintenance & Reliability Engineer is responsible for maintaining, troubleshooting, and improving the plant's electrical, instrumentation, and process control systems to ensure safe, reliable, and efficient operation. This role provides hands-on technical support, leads equipment reliability initiatives, and partners with Operations, Maintenance, and Project teams to minimize downtime, extend equipment life, and drive continuous improvement. Responsibilities: Maintenance & Troubleshooting • Provide day-to-day technical support to resolve electrical, instrumentation, and control system issues impacting plant operations., • Troubleshoot failures involving motors, drives, MCCs, transformers, sensors, and control systems., • Lead root cause failure analysis (RCFA) and implement corrective/preventive actions., • Develop and optimize preventive and predictive maintenance programs for electrical and instrumentation assets., • Design, specify, and oversee installation or upgrades of electrical and instrumentation systems including control valves, transmitters, analyzers, interlocks, 480VAC starters, 120VAC/24VDC circuits, and VFDs., • Review and update I&E drawings, specifications, and single-line diagrams., • Manage contractors for electrical and instrumentation projects; ensure work meets codes, standards, and plant specifications., • Provide first-level troubleshooting and maintenance of DCS systems and related field instrumentation., • Configure and maintain control loops, interlocks, signal inputs/outputs, and communication protocols (Foundation Fieldbus, Profibus, Modbus, wireless)., • Coordinate system updates, backups, and minor modifications to improve process reliability and operability., • Analyze equipment performance data to identify reliability risks and develop improvement plans., • Apply reliability tools such as FMEA, RCM, and life-cycle analysis to optimize asset performance., • Support capital projects by providing technical input to design, commissioning, and maintenance readiness., • Act as the primary technical advisor and functional lead for all I&E personnel in Maintenance., • Collaborate with Operations to improve safety, yield, and overall plant performance., • Support Process Safety Management (PSM) initiatives including MOC, PHA participation, and incident investigations., • B.S. in Electrical, Instrumentation, or Chemical Engineering, • Minimum 5 years of instrumentation and electrical maintenance experience in a chemical, refining, or industrial manufacturing environment., • Working knowledge of Yokogawa DCS (other platforms such as DeltaV, Honeywell, or ABB a plus).., • Knowledge of discreet, continuous, and sequential control, loop tuning, adaptive control, and feed-forward control modeling., • Proven ability to diagnose, troubleshoot, and resolve equipment and process issues., • Familiarity with key PSM elements including Process Hazards Analysis, Process Technology, Management of Change, and RAGAGEP., • Demonstrated ability to lead, mentor, and coach team members in a collaborative environment., • Strong project management skills with the ability to prioritize and manage multiple complex, time-sensitive projects., • Excellent technical writing, interpersonal, and communication skills., • Self-motivated with initiative and the ability to work independently., • Proficient in Microsoft Office (Word, Excel, PowerPoint). Competencies: • Customer Focus, • Building strong customer relationships and delivering customer-centric solutions., • Business Insight, • Applying knowledge of business and the marketplace to advance the organization's goals., • Cultivates Innovation, • Creating new and better ways for the organization to be successful., • Action Oriented, • Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm., • Ensures Accountability, • Holding self and others accountable to meet commitments., • Drives Results, • Consistently achieving results, even under tough circumstance, • Collaborates, • Building partnerships and working collaboratively with others to meet shared objectives., • Values Difference, • Recognizing the value that different perspectives and cultures bring to an organization, • Communicates Effectively, • Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences., • Courage, • Stepping up to address difficult issues, saying what needs to be said., • Instills Trust, • Gaining the confidence and trust of others through honesty, integrity, and authenticity., • Situational Adaptability, • Adapting approach and demeanor in real time to match the shifting demands of different situations. We offer a competitive compensation package that includes base pay and an annual incentive. This program is designed to reward individual performance and align overall rewards with corporate and team performance. Our employees benefit from a robust healthcare package that includes wellness reimbursements, along with generous perks such as three weeks of paid time off, ten company holidays, paid parental leave, education reimbursement, and a matching 401k plan, among other offerings. Applicants must be authorized to work for ANY employer in the U.S. Learn more at kuraray.us.com/careers/ Kuraray America, Inc. is an Equal Employment Opportunity/disability/protected veteran status No third-party candidates accepted. Job Posted by ApplicantPro

Job Description Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631 ; (956)247-2467 ; (281)965-2749 Walk-ins Accepted! Apply today! 815 Sheila Lane Channelview, TX 77530 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 7. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 8. Must possess a working knowledge of welding equipment and work processes used in marine welding., 9. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 10. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 11. Must understand the US customary and metric measurement system., 12. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job DescriptionSalary: Overview BlastOne is a business that is growing fast globally and looking for top talent to join our dynamic fast paced family! What makes us great is phenomenal staff who fit our fantastic culture! We believe in paying well and offering great benefits in order to attract the best talent. What we do: BlastOne is a leading global supplier in the Industrial Corrosion Control Industry! Hiring fantastic people is our key to growth. We hire top talent who shares our values! The Role This is a full time, hands-on position working within a creative, energetic & highly customer focused sales environment. Your primary jobs are: • To grow and enhance existing customer relationships, find potential and bring new customers on board with BlastOne in your designated group of clients or territories., • Establishing relationships with senior decision makers in a corporate environment, long term vision (6 months to 5 years) and influencing specifications to maximize BlastOne opportunities, • Tracking of long-term potential opportunities and projects that will provide business for BlastOne in the future., • Proactive sales calls to create future business opportunities You will need good computer skills, excellent phone sales skills, a passion for organization, and experience in selling industrial equipment/components. Required Skills/Qualifications • Minimum 3 years experience in selling Industrial Equipment/Machinery, • Demonstrated ability to sell, • Mechanical aptitude, • Problem solver, • Organizational skills, • Solid grasp of basic computer systems - Microsoft Outlook/Word/Excel, CRM, etc., • Excellent attention to detail. The detail matters! If we can't get the small things right, we'll never hope to get the big things right!, • Brilliant task and time management skills. You always complete your assigned tasks on time, every time!, • A can-do attitude. Preferred Skills/Qualifications • Fluent in use of salesforce.com CRM system, • Ability to write technical sales letters, • Understanding of Corrosion Control Industry, • Experience with Industrial Sandblaster/Painter The Perks working at BlastOne • Great company culture with a meaningful mission, • Flexible time off, • Generous 401k policy, • Industry leading Health Insurance & benefits program, • Ability to put your personal stamp on the success of a company, • Incredible opportunities to grow within the company and the industry, both your responsibilities and compensation Personality / Core Value Requirements BlastOne is a unique company. We have a strong, close-knit team of hard working, caring professionals who have a passion for supporting our customers.To accomplish this, we take great effort to ensure that the members we add to our team will contribute positively to the great culture we already have. Were happy but we spell it HAPIEE which is an acronym for our core values and beliefs: • H:Humility it is the team that wins - no one is better than anyone else on the team. My success is just as much the result of others I work with., • A: WereAgile we move and work quickly and are flexible we change quick., • P: Were positive, outgoing andPassionate! Our favorite phrase is CAN DO!, • I: We act withIntegrityat all times. We are respectful and courteous. We do the right thing., • E: WeExecute we do what we say we will do. Action is better than inaction., • E: We always operate withExcellence and with a hard work ethic.

Job Description Labor One is hiring Journey-Level Shipfitters for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (956)382-2631; (956)247-2467; (281)965-2749 Walk-ins Accepted! Apply today! 815 Sheila Lane Channelview, TX 77530 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for performing, with minimal supervision, steel and aluminum structural work in all stages of repair and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships and barges. The position requires a working knowledge of procedures, strong mechanical aptitude and ability and be able to follow directions. The individual must possess experience in the trade, knowledge of ship terminology, blueprint reading, measurements, and the ability to interpret job specifications and drawings. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Ability to comprehend instructions, drawings, and general correspondence., 2. Comprehensive understanding of ship repair terminology and ship compartment location nomenclature., 3. Be physically and medically capable of wearing all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Ability to write comprehensive Condition Found Reports (CFR) describing the material condition of the ship as it pertains to the assigned work item, and provide recommended corrective action., 5. Ability to effectively confer job related information to the structural supervisor and small groups., 6. Ability to read and interpret structural drawings (including weld symbols), sketches, specifications, and NavSea standard items and Navy damage control diagrams., 7. Experience fabricating templates, squaring plates, scribing in structures, and installing perpendiculars on ships in accordance with drawings, specifications, or sketches., 8. Experience using oxy-acetylene torch for cutting and washing., 9. Welding experience: SMAW (S-11A) (fillet) FCAW (S-1) (fillet) GMAW (S-25) (fillet), 10. Experience using hand and power tools safely including but not limited to mauls, grinders, circular and reciprocating saws, and hand and magnetic drill., 11. Understand the proper use and operation of structural shop fabrication equipment, including shears, punches, and brakes., 12. Possess a working understanding of the aluminum 5XXX process., 13. Ability to add, subtract, multiply, and divide whole numbers, fractions, and decimals using US customary measurement system., 14. Possess a working knowledge of, and be able to take measurements using the metric system., 15. Four (4) years of related experience. DUTIES AND RESPONSIBILITIES 1. Must comply with OSHA standards and the shipyards best safety practices., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 3. Work shifts and overtime as assigned., 4. Keeping the work area clean and safe at all times, especially at the end of the shift., 5. Understand relevant work processes, operation of equipment, and complete tasks proficiently., 6. Complete daily work assignments and provide status of unfinished work for shift turnover., 7. Use appropriate sections of NAVSEA, ABS, Coast Guard standards and manufacturer's tech manuals., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 50 lbs to 100 lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift Only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description JOB TITLE: SALES COORDINATOR INTRODUCTION: How strong is your hustle? If you push to exceed expectations and to delight customers then we want you. 4-Horn Power & HVAC offers competitive wages and a full range of Medical, Dental, Vision, Life insurance, as well as Short-Term and Long-Term Disability Insurance. The Company also offers 401(k) options with matching under policy guidelines. PRIMARY FUNCTION: The Sales Coordinator position gives support and coordination to the client in all rental equipment needs. This position ensures that all rental related functions of the branch are conducted in an efficient, accurate, and timely manner. This role provides a great opportunity to learn all aspects of the business to prepare for future role in sales and/or management. PRIMARY DUTIES: • Assists Sales Reps and Branch Mgmt. with the coordinating of all rental equipment (and rental equipment accessories) inventory, deliveries, and pickups, • Act as a liaison between customers, and other departments of the branch, to ensure customer expectations are met, exceeded, and good will is maintained for future business, • Manage established procedures to ensure Company standards are maintained through Company and client policies and procedures including, but not limited to, safety, sales processing, and confidentiality, • Maintain professional and ethical business relationships with all customers and co-workers following the established company policies and procedures., • Produce all required paperwork and reports accurately, completely, and in a timely manner, • Responsible for answering branch phone and routing calls to appropriate office(s) and/or departments, • Responsible for RentalMan system management of all on/off rents, • Dispatches and coordinates delivery and pickup of equipment and parts, • Dispatches service calls as required and maintains appropriate call logs, • Issues and receives Purchase Orders, • Monitors accounts receivable reports, • Responsible for the day-to-day operation of the branch in the absence of a Branch Manager, • Creates and monitors rental contracts and delivery tickets, • Periodically conduct weekly safety meetings, • Continuous growth in knowledge of Company products, inventory, pricing and delivery capabilities, • Performs other tasks and duties as assigned by Management EDUCATION & SKILLS REQUIRED: • Must have a Bachelor's degree, • Must have a desire to work in Outside Sales, • Must have excellent customer service and problem-solving skills, • Must be able to multi-task and work on many different projects at one time, • Must be able to work independently, and in a team environment, to prioritize and accomplish assigned projects, • Must be detail oriented and organized, • Must have solid computer skills (RentalMan experience is a plus)

Job DescriptionPRIMARY FUNCTION: The Sales Coordinator position gives support and coordination to the client in all rental equipment needs. This position ensures that all rental related functions of the branch are conducted in an efficient, accurate, and timely manner. This role provides a great opportunity to learn all aspects of the business to prepare for future role in sales and/or management. REQUIRED EDUCATION & SKILLS: • Must have a desire to work in Outside Sales, • Bachelor’s degree preferred or equivalent experience, • Must have excellent customer service and problem-solving skills, • Must be able to multi-task and work on many different projects at one time, • Must be willing to learn all aspects of the business to prepare for a future role in sales and/or management PRIMARY DUTIES: • Assists Sales Reps and Branch Mgmt. with the coordinating of all rental equipment (and rental equipment accessories) inventory, deliveries, and pickups, • Act as a liaison between customers, and other departments of the branch, to ensure customer expectations are met, exceeded, and good will is maintained for future business, • Responsible for RentalMan system management of all on/off rents, • Dispatches service calls for delivery, equipment pick up, parts and maintenance, • Monitors accounts receivable reports, • Creates and monitors rental contracts and delivery tickets, • Continuous growth in knowledge of Company products, inventory, pricing and delivery capabilities, • Performs other tasks and duties as assigned by Management National Tank & Equipment is an Equal Opportunity company.

Job Description JOB TITLE: Sales Coordinator PRIMARY FUNCTION: The Sales Coordinator position gives support and coordination to the client in all rental equipment needs. This position ensures that all rental related functions of the branch are conducted in an efficient, accurate, and timely manner. This role provides a great opportunity to learn all aspects of the business to prepare for future role in sales and/or management. REQUIRED EDUCATION & SKILLS: • Must have a desire to work in Outside Sales, • Bachelor’s degree preferred or equivalent experience, • Must have excellent customer service and problem-solving skills, • Must be able to multi-task and work on many different projects at one time, • Must be willing to learn all aspects of the business to prepare for a future role in sales and/or management PRIMARY DUTIES: • Assists Sales Reps and Branch Mgmt. with the coordinating of all rental equipment (and rental equipment accessories) inventory, deliveries, and pickups, • Act as a liaison between customers, and other departments of the branch, to ensure customer expectations are met, exceeded, and good will is maintained for future business, • Responsible for RentalMan system management of all on/off rents, • Dispatches service calls for delivery, equipment pick up, parts and maintenance, • Monitors accounts receivable reports, • Creates and monitors rental contracts and delivery tickets, • Continuous growth in knowledge of Company products, inventory, pricing and delivery capabilities, • Performs other tasks and duties as assigned by Management 4 Horn Power & HVAC is an Equal Opportunity company.

Job DescriptionBenefits: • Flexible schedule, • Opportunity for advancement Are you a hands-on I.T. or Telecom professional looking for something beyond the desk? AMG Tech Support is seeking skilled, driven technicians to support our growing national client base. This role goes far beyond basic helpdesk tasks one day you might be installing an operating system, the next you're drilling through walls and running structured cabling across entire buildings, or terminating a 66-block. If you're the kind of person who thrives in the field and loves the variety that comes with every job site, this opportunity is for you. Job Responsibilities • Perform a wide range of technical tasks including but not limited to:, • OS installations, hardware diagnostics, and software setup, • Structured cabling (including drilling, running, and dressing cables), • Telecom work (punch-downs, demarc extensions, etc.), • Work independently across various environments: retail, medical, restaurant, and corporate, • Maintain a high standard of professionalism with clients, • Be on call and ready to respond to service requests within your territoryPreferred Skills & Experience, • PC and printer troubleshooting experience (a strong plus), • At least 1 year of I.T. or Telecom experience, and one of the following:, • A+ Certification, • Network+ Certification, • OR 5+ years verifiable field experience in I.T./TelecomRequired Equipment & Qualifications, • Reliable personal vehicle (Public transportation not accepted), • Valid drivers license, • Must have a standard set of tools for basic I.T. and networking tasks (e.g., screwdrivers, cable testers, crimpers)., • Laptop with Ethernet port, • Smartphone with mobile hotspot, • Ability to accept job assignments based on your availability; being on-call 24/7 is a strong advantage., • Punctual, courteous, and presentableCompensation & Perks, • Paid hourly while on site, • 1099 contractor position, • Travel pay included (based on time travel; approx. 80-mile radius from home), • App-based tracking for job time and travel, • Exposure to new and exciting technologies and clients, • Opportunity to expand your skills and industry knowledgeAbout AMG Tech Support AMG is a trusted provider of I.T. and Telecom solutions to professional offices, medical facilities, restaurants, and retail operations nationwide. We specialize in structured cabling, point-of-sale configurations, and network infrastructure. Our mission is to deliver reliable, scalable, and efficient I.T. services that help our clients stay competitive and connected. Ready to take your I.T. career to the next level? Apply today and join a team that values flexibility, skill, and drive.

Job Description Overview The Bilingual Cashier is to greet and thank every customer who enters and leaves the store. Cashiers must be proficient in all aspects of the Cavender’s Boot City cashiering system and knowledgeable of all paperwork associated with each cashiering entry. Cashiers are also responsible for keeping the store neat and clean and must always answer the phone with an enthusiastic response and professional manner. Cashiers will support our management staff with miscellaneous tasks like stocking, visual displays, special orders, and all basic housekeeping needs. Duties and Responsibilities • Support the “Cavender’s Culture” and drive our Mission, Vision, and Values., • Perform cashiering tasks accurately and efficiently., • Keep work area neat, clean, and organized., • Be knowledgeable about CBC policies and procedures., • Be knowledgeable of all CBC cashiering transactions:, • Cash Sales, • Check Sales, • Non-taxable sales, • Credit Cards, • Voids, • Exchanges, • Enter all sales and monies in register at the time of sale., • Help stock merchandise and straighten the store as needed., • Suggest possible add-on purchases to the customer and promote store specials., • Report to work promptly, neatly groomed, and appropriately attired., • Be security conscious at all times., • Provide knowledgeable responses to phone inquiries (e.g. sales, promotions, store location, price, and inventory)., • Keep updated on sale promotions (items/prices/etc.)., • Practice inventory control on boots., • Check for boot mis-mates., • Follow the company policy on all commission sales; validate all sales tickets., • Perform all other miscellaneous duties as assigned., • Job requires associate to raise or lower objects from one level to another regularly during shift., • Fluency in both English and Spanish is required., • Ability to comprehend basic instructions., • Ability to interpret documents., • Ability to understand the meanings of words and effectively respond., • Ability to analyze information and write reports., • Associate must be able to stay alert during work hours assigned. Cavender’s is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, military status, national origin, sex, ancestry, age, sexual orientation, pregnancy, disability, genetic information, or any other personal characteristic protected under federal, state, or local law. Cavender’s will provide reasonable accommodations for persons with a disability upon request. If you have a disability and need assistance completing the application, please call Customer Service at (888) 361 – 2555 or visit your nearest Cavender’s store.

Job Description Technician FLSA Classification: Exempt Reports to: Operations Manager Job Description Summary/Objective: The Technician is responsible for inspecting, troubleshooting, and repairing vacuum trucks and related equipment, ensuring they meet safety and operational standards. Driving Responsibilities: Driving is a fundamental requirement of all shop roles at Vac2Go. Employees must safely and efficiently operate vehicles and adhere to all federal and state driving regulations to support daily operations and customer needs Essential Functions: • Review the Plan of the Day board and monitor for updates throughout the day., • Execute repairs according to the Plan of the Day., • Conduct all required preventative maintenance., • Manage inventory of parts and equipment, requesting approval to order as needed., • Run diagnostics on all trucks and equipment., • Check in vehicles upon return, completing and submitting Check-In Sheets for approval., • Perform Check-In/Check-Out procedures., • Perform bag changes as needed for each vehicle., • Maintain detailed documentation for preventative maintenance in Fleetio or equivalent PM system., • Maintain accurate and updated documentation in the Fleet Management system for DOT requirements and submit it to the Operations Manager daily., • Manage time effectively to execute the Plan of the Day and address unplanned customer needs., • Monitor the shop for safety concerns and address issues immediately., • Communicate changes in the Plan of the Day to the Mechanic and update the team proactively., • Ensure required parts are available or on order before beginning repairs., • Diagnose and identify the root cause of issues., • Determine the best path forward to execute necessary repairs and maintenance quickly and safely., • Balance cost efficiency and quality in decision-making., • Troubleshoot common vacuum truck and equipment repair needs., • Decide whether a repair or replacement is the most efficient solution., • Identify issues that immediately impact the ability to meet customer needs., • Deliver basic training to customers about each vacuum truck and equipment type as needed., • Address daily customer questions and concerns via phone, email, and in-person interactions promptly and professionally., • Frequent communication with others; ability to remain stationary for prolonged periods., • Walking, handling, and reaching with hands and arms., • Ability to lift to 50 lbs. frequently., • Travel may be required for training or attending industry events., • High School Diploma or GED required., • A minimum of 2 years of driving experience in accordance with CDL or Non-CDL requirements is required., • 1-3 years of experience with both automatic and manual equipment., • Must have a valid driver’s license and a current DOT certification (CDL or Non-CDL)., • Able to provide 10 years of employment history., • Proficient knowledge of electrical and hydraulics., • Ability to operate diagnostic systems and understand results., • Good communication skills, both written and oral., • Must be authorized to work in the United States. Manual Lifting Requirements Standard Manual material handling and movement is a component of almost every single job in our shop. Typically, it involves lifting, lowering, pushing, pulling, gripping, pinching, carrying, and holding objects to some degree, whether by hand or with some form of mechanical lift or assistance. Each of these handling activities exposes the employee and the shop to the potential of personal injury or property damage. To reduce overall injuries, we are aiming our efforts at reducing material handling hazards to our employees. Vac2Go Ergonomic Guidelines • The maximum weight to be lifted by one employee with two hands is 50 pounds., • Two people working together in tandem can lift 50–100 lbs., • For anything over 100lbs, mechanical means must be used at all times., • Work within your power zone. Keep weight centered on your torso and as close to your body as practical., • Avoid twisting and turning while lifting., • Push versus pull as often as possible., • Always ensure you know the weight of an object before attempting to lift or carry it. Types of mechanical means available to assist: • Forklifts, • Use the appropriately rated forklift., • Dollies/Pallet movers/Carts, • Do not overload the device. Affirmative Action/EEO statement: Vac2Go is an Equal Opportunity Employer and complies with ADA regulations as applicable. Note: This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. Turner Industries Group is looking for an Electrical & Instrumentation Technician to join our nested maintenance team at a site in the Pasadena, TX area. THIS IS A ROTATING SHIFT POSITION - 4 ON, 4 OFF, 12 HOUR SHIFTS WORKING DAYS AND NIGHTS. • Identify electrical problems with a variety of testing devices., • Maintain and control 480 VAC electrical distribution systems., • Be familiar with splicing and stress cones., • Self-motivated with the ability to work independently., • Troubleshoot, diagnose, & solve Instrumentation issues that occur within an active running process unit., • Troubleshoot, maintain, and repair low voltage electrical systems., • Maintain instrumentation/electrical equipment in accordance with manufacturers' recommendations., • Must be familiar with the following: transmitters, switches, analyzers, PH and Conductivity probes, programmable controllers, proximity devices, level control systems, control valves, equipment and personnel safety systems, electrical distribution systems, transformers, single phase motors, three phase motors and motor drives and controls. Within each category there are a variety of pneumatic and electronic devices., • Ability to read and interpret electrical drawings, schematics, P&ID's, equipment drawings., • Must be able to pass a background check and drug screen, • The successful candidate will be local - per diem and relocation are not available for this position, • NCCER Certification preferred, • Electrical License required General Job Description: Conducts calibration of instrumentation both electronic and pneumatic, field and control room, and installation of instrument loops. Functional Requirements: Receives, inventories and catalogs instruments for calibration according to construction schedule; sets up calibration and loop files; checks on installation of instrument loops; coordinates and runs (or assists) in loop checks, to include checkout with computer as required; maintains installation and completion records; keeps loop drawings, installs air tubing and control tubing runs, works start up following start up procedures; inspects meters, indicators and gauges to detect abnormal fluctuations; test accuracy of flow meters' pressure gauges, temperature indicators, controllers, radiation counters or detectors and other recording, indicating or controlling instruments to locate defective components in the system; removes defective instruments from system and decontaminates, disassembles and cleans instruments and replaces defective parts; lubricates instruments and replaces defective wiring and tubing; keeps loop drawings, installs air tubing and control tubing runs, works start up following start up procedures. Qualification Standards: • Written pre-employment qualification test or NCCER verification, • Post-offer drug/alcohol screen and physical evaluation, • Hazard Communication orientation/test, • Turner Industries Group, LLC indoctrination, • OSHA approved corrective eyewear (Z87), • Job site orientation, • Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.), • Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. SPECIAL WARNING: PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG/ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT/CASH CARD FOR PURPOSES OF THE DRUG/ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS, PLEASE CONTACT OUR HIRING OFFICE AT BEFORE AGREEING TO PAY FOR A DRUG/ALCOHOL TEST Job Posted by ApplicantPro

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic, and labelling is accurate. Eurofins is dedicated to delivering testing services that contribute to the health and safety of society and the planet, and to its corporate responsibility to protect the environment and ensure diversity, equity, and inclusion across the entire network of Eurofins companies. Job Description Business Unit Manager (BUMa) is responsible for maintaining positive operating margin at the laboratory level and for meeting and exceeding the annual budget. Supervises all laboratory personnel and provides leadership and direction as needed. Responsible for ensuring compliance and integration of facility operation with corporate and regulatory policies and procedures. The Business Unit Manager will serve as a liaison with corporate business partners and will champion Company policies, vision, and mission. Business Unit Manager responsibilities include, but are not limited to, the following: · Lead team, schedule, and train employees · Ensure adherence to highest quality and efficiency standards in laboratory operations · Ensure coverage and performance · Foster morale and teamwork · Demonstrates and promotes the company vision · Regular attendance and punctuality · Manage the technical conduct, quality control, and related record keeping of all analytical evaluations performed · Responsible for the supervision, organization, and coordination of all technical activities of personnel within the principles of sound scientific endeavors, business economy, and the professional development of subordinate employees. · Provide the necessary planning, organization, direction, and control to meet the goals of the company. · Ensure that all pertinent company health, safety, and environmental programs are adhered to and documentation is maintained. · Establish and maintain professional business relationships with clients, industry officials, and peers. · Assist in the generation of marketing strategies, prepare comprehensive technical work proposals, and maintain an influential position in establishing business expansion plans. · Provide input toward the financial growth and development of the company. · Coordinate business activities with the Business Unit Managers from the other locations to ensure customer expectations are met without duplication of testing activities. · Responsible for the overall operational success of the laboratory, which includes, but is not limited to: budgeting, making decisions on capital expenses, managing senior staff, attending to major client needs, revenue & profit growth, and cost control. · Oversee daily operations including: laboratory, quality, logistic, and managerial duties. · Represent the laboratory in technical meetings. · Participate with the Sales/Marketing team in the preparation and quotation of major technical studies. · Propose major investments to company executives. · Ensure that the laboratory expenses are on track with the annual budget. · Approve major expenses and control the costs of the laboratory within established company guidelines. · Analyze monthly laboratory indicators (operating and labor costs, turnaround time, productivity, etc.). · Verify that company employment policies and procedures are followed correctly. · Perform annual performance reviews for direct reporting personnel. Coordinate and review annual reviews of other lab personnel. · Handle employee relation issues as per company guidelines and with the support of Human Resources. · Coordinate the interaction between the different laboratory departments. · Understand and follow each Quality System document relevant to employment responsibilities, e.g., methods, SOPs, etc. Propose changes to documents and approve documents when required · Conducts all activities in a safe and efficient manner Performs other duties as assigned Qualifications Education: · Bachelor's degree in biology, chemistry, or other related degree concentration, or equivalent directly-related experience (two years of directly related industry experience is equivalent to one full-time year of college in related major) Experience: · At least 10 years of supervisory experience · At least 10 years professional experience in laboratory operations with a minimum of 5 years of laboratory operations or large/multi-department/team leadership with profit/loss accountability - $5M+ Net Sales or equivalent size operation. Demonstrated success in improving operational, profit, quality and safety performance. · Familiarity with laboratory operations and services · Familiarity with EPA, DOT, OSHA, and DOL regulations · Excellent verbal and written skills · Strong customer relations skills · Ability to manage a business at a profit/loss responsibility level · Ability to control operating budgets · Ability to develop and enforce policies and operating practices · Ability to prioritize and delegate responsibilities · Ability to successfully handle contract and other negotiations · Strong decision-making abilities · Problem-solving abilities Professional working proficiency in English is a requirement, including the ability to read, write and speak in English. Additional Information We support your development! Do you feel you don’t match 100% of the requirements? Don’t hesitate to apply anyway! Eurofins companies are committed to supporting your career development. We embrace diversity! Eurofins network of companies believe in strength and innovation through diversity, being an Equal Opportunity Employer. We prohibit discrimination against employees or applications based on gender identity and/or expression, race, nationality, age, religion, sexual orientation, disability, and everything else that makes employees of Eurofins companies unique. Sustainability matters to us! We are well on our way to achieving our objective of carbon neutrality by 2025, through a combination of emission reduction and compensation initiatives. We encourage our laboratory leaders to make sustainable changes at their local level, and in addition to their initiatives we also count on our dedicated carbon reduction team to help us to achieve this goal! Find out more in our career page: Company description: Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in discovery pharmacology, forensics, advanced material sciences and agroscience contract research services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 35 years, Eurofins has grown from one laboratory in Nantes, France to 61,000 staff across a decentralised and entrepreneurial network of ca. 900 laboratories in 61 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2024, Eurofins generated total revenues of EUR 6.515 billion, and has been among the best performing stocks in Europe over the past 20 years. We do not offer Visa Sponsorship for this role. As a Eurofins employee, you will become part of a company that has received national recognition as a great place to work. we offer excellent benefits including comprehensive medical coverage, life and disability insurance, 401(k) with company match, paid holidays, paid time off, and dental and vision options. *The benefits package offered will vary based on the employee's full-time or part-time regular status. Eurofins USA Environment Testing is a Disabled and Veteran Equal Employment Opportunity employer.

Job DescriptionJob Title: IT Programmer Analyst Location: Houston, TX Shift: Day Shift (Details to be confirmed) Position Overview We are seeking an experienced IT Programmer Analyst to perform moderate to complex technical and functional analysis in support of enterprise systems. This role is responsible for monitoring system resources, evaluating business and technical processes, and analyzing historical data trends to support operational efficiency and departmental effectiveness. The ideal candidate will have strong experience with Oracle technologies, integration tools, and enterprise applications. Key Responsibilities * Conduct moderate to complex analysis of systems, processes, and resource utilization * Monitor system performance and identify opportunities for optimization * Evaluate existing workflows and recommend technical improvements * Analyze and present historical data trends to support decision-making * Develop, test, and support integrations and reports for enterprise systems * Collaborate with technical teams, business stakeholders, and analysts to implement solutions * Ensure compliance with internal IT standards, policies, and procedures * Document technical designs, processes, and system changes Required Technical Skills & ExperienceIntegration & Development Tools * Experience with Oracle Integration Cloud (OIC) development * Hands-on knowledge of Eclipse, JDeveloper, Postman, and SoapUI Reporting & Data * Experience with Oracle BI Publisher and Oracle Transactional Business Intelligence (OTBI) * Strong knowledge of SQL and SSIS packages Functional Knowledge (Required) * Functional understanding of Oracle Financials (FIN) * Functional understanding of Oracle Human Capital Management (HCM) * Functional understanding of Oracle Supply Chain Management (SCM) Qualifications * Experience performing system analysis and application support in an enterprise IT environment * Strong analytical, troubleshooting, and problem-solving skills * Ability to interpret business requirements and translate them into technical solutions * Strong communication skills, both written and verbal * Ability to work independently while collaborating with cross-functional teams. For more details reach at . About Navitas Partners, LLC: It is a certified WBENC and one of the fastest-growing Technical / IT staffing firms in the US providing services to numerous clients. We offer the most competitive pay for every position. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job DescriptionJob Title: IT Programmer Analyst Location: Houston, TX Position Type: Contract Position Overview The IT Programmer Analyst is responsible for conducting moderate to complex analysis within the assigned application area. This role includes monitoring system resources, evaluating application and business processes, and analyzing historical information trends to ensure optimal departmental efficiency and effectiveness. Key Responsibilities * Provide application and technical support for enterprise financial, supply chain, and payroll systems * Perform analysis, development, and support activities across assigned applications * Monitor system performance and resource utilization * Evaluate business processes and recommend system enhancements * Develop and maintain batch jobs, programs, and scripts to automate business processes * Support integrations and cross-system communication through workflows and notifications * Analyze and present historical data trends to support operational decision-making * Collaborate with cross-functional teams including Finance, Supply Chain, Payroll, and IT Must-Have Qualifications * Ability to support non-Infor Lawson applications when required * Strong functional knowledge of Finance, Supply Chain, and Payroll * Experience with Infor Lawson IPA (Infor Process Automation), including workflows, notifications, and integrations * Proficiency in application and technical support for Infor Lawson using: * Lawson 4GL * COBOL * SQL * ProcessFlow * Experience creating and maintaining Lawson batch jobs, programs, and scripts to automate business processes across Finance, SCM, and Payroll modules Nice-to-Have Qualifications * Experience with Lawson Design Studio (LDS) forms, UI customizations, and JavaScript enhancements * Knowledge of non-core Infor Lawson S3 applications (e.g., MSCM, XM, LBI) * Previous experience participating in or supporting migrations from Infor Lawson to Oracle Fusion For more details reach at About Navitas Partners, LLC: It is a certified WBENC and one of the fastest-growing Technical / IT staffing firms in the US providing services to numerous clients. We offer the most competitive pay for every position. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job DescriptionDescription: Air Specialty and Equipment is one of the largest air compressor distributors in Texas. We are seeking an experienced individual, who has worked in an industrial or manufacturing environment, to fill the position of Field Service Technician for the Houston, TX area. Responsibilities for the role include, but are not limited to, troubleshooting, maintaining, repairing and installing Air Compressors and Rotating Equipment while also gaining knowledge and experience with industrial air compressors and other compressed air equipment. You will also be responsible for the up-keep of all company trucks, and communicate with the Technical Department regularly to find solutions. • Inspect, troubleshoot, diagnose and maintain rotary screw/ reciprocating air compressors and various types of air dryers, • Perform diagnostics and determine causes for failures on air compressor systems equipment, • Perform routine preventative maintenance such as oil changes, cleaning and setting of factory standard controls. Provide equipment/system recommendations to improve reliability and/or performance, • Consult with and advise customers on compressed air equipment needs, maintenance, and repairs, • Document all service checklist and associated forms, • Strong respect for safety practices and demonstrates the use of necessary PPE and other safety devices Requirements: • 2+ years field service experience required, compressed air experience preferred, • Valid driver's license, • Strong mechanical and electrical background, • Experience servicing, troubleshooting, diagnosing, repairing commercial and industrial compressors and dryers desired, • Strong written and verbal communication skills, • Has own tools necessary to complete job (basic hand tools, multi-meter, thermal gun), • Consistent attendance

Job Description Join Our Team at True North Group! Position: Sales Agent Trainee Number of Openings: 1 Territory Sales Position Available Break Into Sales with Purpose Looking to launch your career in a role where your results directly impact your paycheck. At True North Group, we believe the best salespeople aren't born -they're trained. If you're hungry to learn, ready to hustle, and eager to grow into something more, we'll give you the tools to make it happen. If you're looking for more than a job something that offers real growth, real income potential, and the chance to make a difference this could be it. Your Day-to-Day Will Include: Meeting with individuals and teams in person Presenting workplace supplemental insurance benefits and protecting families Following up and generating leads and building your own pipeline Collaborating with teammates and mentors in and out ofthe field Learning to close deals and manage long-term client relationships We Provide: Uncapped weekly commission + Weekly draw pay + bonus structure Comprehensive training and field development Incentive trips, team events, and networking opportunities A clear, personalized career path from day one It is a requirement that you obtain your Health and Life Insurance license before beginning work with us. Once you receive a job offer, our onboarding team will guide you through the licensing process step-by-step. After you join our team, you'll be eligible for reimbursement of any licensing fees you paid to become licensed. What You Need: A positive attitude and strong work ethic Excellent communication skills A coachable mindset and eagerness to learn The ability to work independently and manage time Reliable transportation and professional presence No Experience, No Problem. Whether you're just out of university, switching industries, or trying to find a place to grow long term, we've built a system that helps newcomers thrive. Many of our top reps came in with zero sales experience ? just the willingness to work hard, take feedback, and stay consistent. We're interviewing now. Take the first step toward something bigger. Apply at

Job DescriptionThis position is built for professionals who excel at listening and advising. Client conversations focus on fit, not pressure. Long-term relationships matter. For over 15 years, we’ve helped entrepreneurial people create successful businesses helping families make smarter financial decisions. We teach you a proven system, provide world-class mentorship, and give you the tools to succeed. You bring the drive and discipline to make it happen. What You’ll Do Work remotely, on your own schedule, helping families protect what matters most. Use our proven process to recommend solutions that fit their needs and budget. Show families how to eliminate debt, protect income, and secure their future—often without increasing their monthly expenses. This isn’t about selling “policies”—it’s about solving problems, building trust, and earning income by providing real value. What You Get True Business Ownership: You’re in control of your schedule, income, and growth. Mentorship That Works: Learn directly from industry leaders who’ve built 6- and 7-figure businesses themselves. Proven Systems & Tools: You’ll never have to reinvent the wheel. Scalable Income: No cap on earnings. Bonuses and incentive trips for top performance. Flexibility: Part-time or full-time—your choice. Group health, dental, and vision benefits available. You’ll never be micromanaged, but you won’t be alone. What We Look For Entrepreneurial Mindset: You take ownership of your work and results. Coachable Attitude: You’re open to learning and applying what works. Work Ethic: You stay consistent and follow through. We don’t care where you come from—we care where you’re headed. If you lead by example, stay focused, and treat this like the business it is, you can build something that lasts. If you’re ready to build a business that reflects your values, supports your lifestyle, and grows with your effort—let’s talk. No pressure. No gimmicks. Just a conversation to see if this is the right fit for you. Requirements • 18+ and authorized to work in the U.S., • 100% Commission 1099, • Able to pass a background check and complete licensing (we’ll guide you through it)., • Prior experience in sales, customer service, leadership is required., • Comfortable working remotely and independently. Benefits • All-Expenses-Paid Vacations – Travel to dream destinations like Puerto Rico, Italy, Portugal, Mexico, and more—fully paid based on performance., • Work-from-Anywhere Flexibility – 100% remote with control over your schedule and income., • Earn Time & Money – System-driven income model gives you the power to create both financial freedom and time freedom., • True Agency Ownership – Build your own business with real contractual ownership., • Legacy Business Transfer – Pass your agency to a loved one and create generational wealth., • Free Life Insurance – One full year of coverage included for qualifying agents., • Up to $500,000 in Life Coverage – Access large term coverage (up to 30 years) as a benefit., • Health Benefits Access – Affordable medical, dental, and vision coverage available through a partner provider., • Award-Winning Culture – Named a top company culture by Entrepreneur and a fastest-growing company by Inc. 5000. • • Mentorship & Training – Plug into proven systems and real-time coaching to level up fast.

Date Posted: Are you the right candidate for this opportunity Make sure to read the full description below. 2026-01-20 Country: United States of America Location: US-MA-TEWKSBURY-TB3 ~ 50 Apple Hill Dr ~ CONCORD BLDG, Tewksbury Tb3 300 Concord Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Ability to obtain INTERIM U.S. government issues security clearance is required prior to start date At Raytheon, the foundation of everything we do is rooted in our values and a higher calling to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. The Systems Engineering Integrated Systems department is seeking a Principal Systems Engineer (Modeling & Simulation). The Integrated Systems team leads all aspects of systems engineering that drive the development of complex systems supporting the Raytheon Land and Air Defense Systems (LADS) mission area from our Tewksbury, MA location. The department supports Raytheon by cultivating a world-class group of systems thinkers who collaborate to architect technical solutions to some of the world's toughest challenges. This is a full-time onsite position based in Tewksbury, MA. What You Will Do * Contribute and collaborate in a team environment receiving input from the program or team experts and contributing your knowledge to advance the discussions. * Communicate with cross-functional engineering teams to coordinate design plans and requirements analysis. * Contribute your knowledge of performance engineering practices and procedures to evaluate work across a wide range of intriguing subject areas. * Manage program technical risks by evaluating requirements and design aspects. * Develop models to validate proposed architectures and designs against requirements as well as help shape future tech growth. * Develop and maintain modeling tools incorporating Digital Signal Processing (DSP) with complex time domain elements. * Analyze data to understand performance and perform root cause analysis. * Incorporate radar system concepts including detection, discrimination, track and signal processing algorithms to model their behaviors and analyze performance. * Incorporate effector system concepts to model their behaviors and analyze performance. Qualifications You Must Have * Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience. * Experience with Digital Signal Processing, including development or application of time-domain signal models to support system design and requirements analysis. * Experience with system modeling, algorithm development, test vectors, or analysis tools in support of evaluating radar requirements and performance. * Experience with MATLAB, Python, C/C++, and/or Fortran. * Ability to obtain Interim Secret U.S. government issued security clearance is required prior to start date. Qualifications We Prefer * Experience with reading and understanding technical design drawings and electrical schematics. * Experience with taking ownership of tasks and leading technical efforts spanning multiple stakeholders, and being able to communicate effectively with all levels of the organization. * Experience with system requirements capture, design, and decomposition. * Experience with radar system concepts; detection, discrimination, track and signal * processing algorithms and their behaviors and performance. * Ability to read and understand technical design drawings and electrical schematics. * Experience with data analysis and statistics with large volumes of data. * Experience conducting analysis and studies, including how to define and execute a study. * Experience using MATLAB for model development. * Demonstrated technical and analytical skills to develop credible results for presenting to the customer. What We Offer * Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. * Relocation assistance is available! Learn More & Apply Now! * Please consider the following role type definition as you apply for this role. * Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. * Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. xmcpwfu All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job DescriptionJob Title: Application Analyst Location: Houston, TX Position Type: Contract Position Overview The Application Analyst is responsible for conducting moderate to complex analysis within the assigned functional area. This role focuses on monitoring resources, evaluating business and system processes, and analyzing historical data trends to ensure optimal departmental performance and effectiveness. The Application Analyst will collaborate closely with cross-functional teams to design, implement, and support system solutions that enhance operational efficiency and address organizational needs. Key Responsibilities * Conduct detailed analysis of business and system processes to support operational effectiveness * Monitor resource utilization and evaluate workflow efficiency * Analyze historical data and trends to support decision-making * Collaborate with Payroll and IT teams to design and implement system solutions * Support improvements to HR and Payroll business processes * Assist with system testing, validation, and implementation activities * Ensure compliance with internal policies and industry standards * Communicate findings, recommendations, and status updates to stakeholders Required Skills & Experience * In-depth knowledge of HR and Payroll processes * Experience with Oracle Payroll implementations, including system configuration and testing * Strong understanding of OTBI and BI Publisher reports for payroll auditing and compliance * Experience collaborating with technical teams on outbound data extracts and system integrations * Strong analytical, quantitative, and problem-solving skills * High attention to detail and ability to manage complex data sets Preferred / Additional Skills * Knowledge of Oracle Absence Management * Knowledge of Oracle Time & Labor * Experience working in large, complex enterprise environments For more details reach at About Navitas Partners, LLC: It is a certified WBENC and one of the fastest-growing Technical / IT staffing firms in the US providing services to numerous clients. We offer the most competitive pay for every position. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job Description Overview Stockers are to receive, price, sensor (if applicable) and inspect freight. Stockers must be proficient in all aspects of the Cavender’s Boot City stocking system, and knowledgeable of all paperwork associated with each stocking function. Stockers must prioritize merchandise by order of importance (i.e., empty wrangler shelves should be restocked after empty polish racks are restocked). Stockers are also responsible for keeping the store neat and clean inside and outside. Duties and Responsibilities • Support the “Cavender’s Culture” and drive our Mission, Vision, and Values, • Support stocking tasks accurately and efficiently, • Keep work area neat, clean, and organized, • Be knowledgeable of all CBC policies and procedures, • Be knowledgeable of all CBC stocking procedures:, • Return to Stock (RTS), • Return to Vendor (RTV), • Validating packing slips, • Tagging merchandise, • Sensor tagging merchandise (if applicable), • Keep back-stock moving out to the sales floor to the proper locations, • Report to work promptly, neatly groomed, and appropriately dressed, • Be security conscious at all times, • Perform all other miscellaneous duties as assigned, • Job requires associate to raise or lower objects from one level to another regularly during shift, • Job requires associate, on a regular basis, to carry objects up to 50 lbs, • Job requires that the associate regularly pick up objects up to 50 lbs, • Ability to comprehend basic instructions, • Ability to interpret documents, • Ability to apply abstract principles to a wide range of complex tasks, • Ability to understand the meanings of words and effectively respond, • Associate must be able to read English., • Associate must be able to understand English, • Associate must be able to stay alert during work hours assigned Cavender’s is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, military status, national origin, sex, ancestry, age, sexual orientation, pregnancy, disability, genetic information, or any other personal characteristic protected under federal, state, or local law. Cavender’s will provide reasonable accommodations for persons with a disability upon request. If you have a disability and need assistance completing the application, please call Customer Service at (888) 361 – 2555 or visit your nearest Cavender’s store.