Technical designer jobs in Fort Worth, TexasCreate job alerts

Job Description M&S Engineering, LLC seeks qualified candidates that are highly organized, energetic, self-motivated with the ability to work independently or as a team for the non-exempt position of Electric Distribution Designer. The position will produce electric distribution field designs, staking of distribution facilities, project estimation and preparation of construction prints using electronic design/estimation software in accordance with the client’s standards of construction and specifications. This position will report to the office and is not remote. Requirements Include: • Ability to represent self professionally in both M&S and the client’s image while meeting with property owners, other engineering firms and construction resources., • Ability to stay abreast with the changing technologies, work planning, and design methodologies associated with Electric Distribution Design., • Ability to mentor and/or train others staff members to transfer personal design knowledge to others., • Proficient with the design of both overhead and underground electric distribution facilities., • Ability to recognize electric distribution framing and components 4kV through 35kV, to initiate designs for construction or reconstruction of both overhead and underground distribution facilities., • Ability to perform distribution line design calculations for structure loading, guying, geometric angle calculations, conductor sag interpretation, unitized framing design, construction practices and construction safety guidelines using industry tools and methods., • Ability to take personal responsibility for the quality, accuracy and time constraints of work product., • Possess strong analytical and technical problem solving skills., • Ability to multi-task several projects through different requirements of design iterations and priority shifts., • Proficient with the use of a laptop computer, and related software programs including, MS Outlook, MS Excel and MS Word., • Ability to communicate effectively, orally and in writing., • Strong skills of time management and multi-tasking., • Ability to work outdoors for extended hours in various climate conditions and travel, including overnight stays for up to five nights., • Ability to walk over and across various terrain and carry surveying instruments, field and staking equipment for the purpose of laying out staking for Electric Distribution Design., • Prefer an Associate’s degree or certificate in Electric Power Technology and/or three (3) years’ prior experience with electric distribution design and estimation., • Familiarity of the operation and maintenance of electrical distribution systems., • Familiarity of joint construction and electric utility best practices., • Knowledge of Electric Distribution construction framing techniques, construction practices and their components., • Use of surveying equipment and gathering of geospatial points., • Prefer the ability to interpret property line boundary, topographic surveys, as-built surveys, construction staking, ROW staking and collection of geospatial points., • Use of electronic design/estimation software to prepare cost estimates using unitized labor and material units, work instructions and construction sketches., • Prefer the experience and ability to research and collect property deed information at record facilities for the evaluation of existing or proposed easements, establish ownership information and definition of property boundaries., • Familiarity with the NESC and its applications to electric distribution line design., • Salary commensurate with experience, • Employer paid health/dental/vision insurance, • Employer paid STD/LTD, • Life Insurance, • Candidate referral bonus, • 401k retirement plan with employer match, • Paid Holidays, • Earned vacation time

Salary Range: $62,499-$103,548Relocation: Yes About Us Oncor Electric Delivery Company LLC, headquartered in Dallas, is a regulated electricity transmission and distribution business that uses superior asset management skills to provide reliable electricity delivery to consumers. Oncor (together with its subsidiaries) operates the largest transmission and distribution system in Texas, delivering power to nearly 4 million homes and businesses and operating more than 143,000 miles of transmission and distribution lines in Texas. Position Summary As a Designer with our Substation Building Information Modeling group at Oncor, you're responsible for the creating substation physical and electrical BIM designs for Company's substation engineering teams and ensuring the Company's substation design BIM standards are current and adhered to by all users. We are considering applicants with multiple experience levels. Please view all details related to responsibilities, education, and experience level for each level of consideration. Key Responsibilities \n • Support the implementation of BIM substation design software's, including process creation, integration with other related Company software, and design library creation.\n, • Develop, maintain, and communicate BIM design symbols, assemblies, libraries, and templates.\n, • Remain aware of new substation equipment being purchased by Company and coordinate directly with substation equipment manufacturers to download design content and update internal design standards.\n, • Perform quality assurance of internal and external substation designs to ensure adherence to Company's BIM design standards and processes.\n, • With minimal direction, develop substation project physical and electrical 3D and 2D Computer-Aid Design (CAD) designs for Engineering teams from conceptual plans.\n, • Perform necessary calculations to ensure that the design meets the technical requirements and adheres to Company's safety and design standards.\n, • Review substation as-builts by comparing post-construction 3D laser scans with 3D BIM design models and following up with Engineering teams on discrepancies.\n, • Coordinate/develop design documents, drawings, and bills of materials.\n, • Bring potential project-related problems and possible solutions to the attention of the responsible party.\n, • Develop and deliver training content to users.\n, • Technical ability to understand electric circuit theory and device selection and placement.\n, • Technical ability to understand electrical designs and industry standards.\n, • Technical ability to select and place equipment in design based on technical requirements.\n, • Experience within a team being a key contributor and/or leading projects.\n High school diploma, GED, or equivalent required. For Associate Designer: • 2-year Associate degree or Bachelor degree in a technical related curriculum are encouraged to apply.\n, • Ability to effectively manage projects from inception to completion, working with other groups.\n, • Consistent delivery of safe and accurate substation designs with minimal supervision and technical direction.\n At Oncor, we offer a comprehensive set of benefits, compensation and performance management programs designed specifically to attract, retain, motivate and reward our high-performing workforce. Our supportive and inclusive culture allows every team member the opportunity to thrive and make a difference. We invest in our employee's success and well-being by offering such things as: \n • Annual incentive program.\n, • Competitive health and welfare benefits (medical, dental, vision, life insurance).\n, • Ability to earn wellness incentives (up to $2,000 in 2025) and other wellbeing resources.\n, • 401k with dollar-for-dollar company match up to 6%.\n, • 401k match with student debt program.\n, • Cash balance pension plan.\n, • Adoption Assistance.\n, • Mental health resources.\n, • Employee resource groups.\n, • Tuition reimbursement.\n, • Competitive vacation, 10 company holidays and 2 personal holidays.\n, • Paid parental leave.\n, • Salary continuation for up to 6 months for approved employee illness or injury.\n Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionPosition: UX Product Designer Position Type: W2 Contract – No Benefits Position Location: Ft. Worth, TX We’re a multidisciplinary UX team that drives the user experience for our customer and employee facing applications. In this position, you’ll work within a cross-functional team where you’ll influence product and design decisions with ownership of projects from inception through development. You’ll get to showcase your experience and knowledge in UX research, design, content and information architecture. The job American is transforming the way we deliver software and solutions for our customers, and this role is a new one at American. As part of this transformation the UX organization is aligning to a Portfolio and Product-based culture and we are looking to hire a UX Product Designer. The UX Product Designer is a thoughtful, empathetic and experienced UX professional with extensive knowledge of UX best practices and hands-on experience with interaction / visual design, information architecture, user research and UX strategy. This job is a member of the User Experience (UX) and Digital Platform team within IT. This is an exciting opportunity for the right individual to work across disciplines to take large, complex applications and transform them into simple, intuitive experiences. You’ll wear many UX hats and be responsible for conceptualizing, prototyping, presenting and delivering a variety of UX deliverables (personas, flows, research plans, test scripts, low and hi-fidelity mockups). Principal duties and responsibilities General • Works with a cross-functional team using agile methodology to define user stories and UX deliverables, • Influences design and product owner decisions based on UX best practices, design principles and research, • Collaborates with developers to find the most effective, expedient and efficient way to implement solutions, • Collects, analyzes, presents and actions feedback and manage changes to deliverables, • Presents work in a clear and compelling manner to stakeholders (be able to explain design, • recommendations by citing best practices, research data or business requirements), • Designs the visual style, interface and interaction flow of applications and experiencesInformation Architecture, • Advocate for the user and collaborate with business owners to develop features and flows that align with the user’s needs, • Gather and translate rules and assets into UX systems, programs and enterprise solutions, • Prepare, manage, update and distribute UX documentation (navigational flows, wire frames, mock-ups, use cases, task flows prototypes, content, system errors, etc.)UX Research, • Create research strategies based on desired outcomes and develop usability test plans, scripts and scenarios for prototypes. Regularly formulate and test hypotheses during design iterations., • Use research techniques (heuristic reviews, user interviews, remote unmoderated and in-person testing) to determine ease-of-use and comprehension of designs and ideas, • Design, recruit / schedule and moderate usability studies and user interviewsA qualified candidate should possess, • Bachelor’s degree in human computer Interaction, Human Factors Engineering, Computer Science, Visual Design, Library Sciences or other related discipline, or equivalent experience or training, • 5+ years of experience as a UX practitioner with a background in user experience design, interaction design or similar, • Strong skills in modern design and prototyping tools (Figma, Adobe CC, etc.), • Experience working closely with developers from inception through implementation in an agile environment, • Advanced analytical skills dealing with complex data problems and implementing sustainable solutions, • Proven ability to collaborate effectively across disciplines, product lines, roles, geographical and time zone boundaries, • Knowledge and proficiency using remote unmoderated testing tools and moderated testing devices and platforms, • In-depth understanding of both qualitative and quantitative research methods, • Strong understanding of user-centered design principles and a solid grasp of trends in web and app design, • Strong organizational skills and the ability to label, classify and intelligently build flows and wireframes for complex computer applications are a plus, • Experience rapidly iterating designs to conduct user testing and to deliver to development teams, • Experience in responsive, adaptive and accessible designs, • Ability to manage multiple concurrent projects and communicate effectively with non-technical users, • Please include candidate's online portfolio (and password as applicable) demonstrating a strong experience in creating user-centered experiences Powered by JazzHR xcVvhL66PP

Join a Global Leader in Workforce Solutions – Net2Source Inc. Who We Are: Net2Source Inc. isn’t just another staffing company, we’re a powerhouse of innovation, connecting top talent with the right opportunities. Recognized for 300% growth in the past three years, we operate in 32 countries with a global team of 5,500+. Our mission? To bridge the talent gap with precision—Right Talent. Right Time. Right Place. Right Price. Please find below the job description. Position: Teamcenter Super User (Creo & SolidWorks Integration) Location: Fort Worth, TX 76134 (Onsite preferred) Type: Contract Top 3 Skills: Teamcenter, Creo SolidWorks, AutoCAD, Teamcenter 14.3, CAD and Teamcenter End User Support Super User/ Business User to train and provide support to end users Primary Responsibilities • System Expertise & Support, • Serve as the primary point of contact between end users and the PLM support/administration team for issues related to Teamcenter, Creo, and SolidWorks., • Provide first-level functional and technical support for CAD and PLM users, including troubleshooting integration issues, login problems, and data synchronization errors., • Identify recurring issues and collaborate with IT or PLM administrators for root cause analysis and resolution., • User Training & Guidance, • Conduct user training sessions, create user guides, and share best practices for CAD data management and Teamcenter workflows., • Mentor engineers and designers on correct usage of check-in/check-out, revision control, and product structure management., • Assist new users in onboarding and setup of Creo/SolidWorks and Teamcenter integration tools., • Process & Data Management, • Ensure proper CAD model and drawing management, including naming conventions, version control, and release processes., • Maintain data integrity within Teamcenter—validate BOMs, CAD structures, and associated metadata., • Support engineering change processes (ECR/ECO), ensuring CAD data is properly linked and updated in PLM., • CAD-PLM Integration Management, • Monitor and validate data exchange between Creo/SolidWorks and Teamcenter through the respective integration tools (e.g., TCAI, SolidWorks Integration)., • Assist in testing and deployment of new releases, patches, or configurations related to CAD integrations., • Collaborate with IT/PLM teams to report and test integration bugs or performance issues., • Process Improvement & Documentation, • Identify opportunities to streamline CAD and PLM workflows and provide feedback for continuous improvement., • Document procedures, configuration changes, and known issues to maintain up-to-date operational references., • Support audits and compliance checks related to design data and configuration management., • Collaboration & Coordination, • Act as the liaison between engineering teams, PLM administrators, and IT support for coordination of user needs and system enhancements., • Participate in UAT (User Acceptance Testing) for new Teamcenter or CAD releases., • Contribute to standardization efforts for templates, attributes, and design libraries within Creo/SolidWorks. Preferred Skills & Experience • Strong functional understanding of Teamcenter modules: Structure Manager, Workflow Designer, Change Management, and Classification., • Experience with Creo Parametric and/or SolidWorks modeling best practices., • Familiarity with Teamcenter CAD integration tools such as TCAI (Teamcenter Integration for Creo) or SolidWorks Integration (SWIM)., • Good understanding of Engineering BOM (EBOM) and product configuration principles., • Excellent communication and documentation skills for cross-functional coordination. Why Work With Us? We believe in more than just jobs—we build careers. At Net2Source, we champion leadership at all levels, celebrate diverse perspectives, and empower you to make an impact. Think work-life balance, professional growth, and a collaborative culture where your ideas matter. Our Commitment to Inclusion & Equity Net2Source is an equal opportunity employer, dedicated to fostering a workplace where diverse talents and perspectives are valued. We make all employment decisions based on merit, ensuring a culture of respect, fairness, and opportunity for all, regardless of age, gender, ethnicity, disability, or other protected characteristics. Awards & Recognition • America’s Most Honored Businesses (Top 10%), • Fastest-Growing Staffing Firm by Staffing Industry Analysts, • INC 5000 List for Eight Consecutive Years, • Top 100 by Dallas Business Journal, • Spirit of Alliance Award by Agile1 Ready to Level Up Your Career? Click Apply Now and let’s make it happen.

Job Description About Trotter Controls: Trotter Controls is a world-class provider of aerial firefighting systems, telemetry systems, turnkey control systems, and automation equipment. We are a technology-driven company with a diverse engineering and manufacturing focus. Our in-house capabilities include: • Control systems design and fabrication, • Mechanical systems and automation equipment, • Advanced manufacturing technologies:, • 3D printing, • Laser welding, • SMT & through-hole electronics, • Traditional mechanical and electrical fabrication and assembly Position Overview: We are seeking a Mechanical Designer or Engineer / SolidWorks Operator to join our growing engineering team. This role is ideal for a technically skilled, self-motivated team player who thrives in a dynamic environment focused on R&D and continuous product improvement. We value aptitude, attitude, hands-on experience, and a desire for continuous growth. Key Qualifications: • College degree is a plus but not required, • Equivalent fabrication and SolidWorks experience may substitute for a degree, • Candidates with hands-on shop experience are highly favored, • Strong understanding of fabrication techniques, including:, • Sheet metal, • Machining processes, • Experience with equipment/mechanism or structural design is required, • Detail-oriented with the ability to create:, • Mechanical designs, • Drawings, • Assemblies, • 3D models, • Proficiency in SolidWorks is a plus Ideal Candidate Attributes: • Team player with strong collaboration skills, • Positive, can-do attitude with a focus on progress and continuous improvement, • Strong work ethic and ability to manage tasks independently, • Responsive to technical requirements and able to prioritize effectively, • Excellent communication skills—both verbal and written, • Ability to document engineering details and processes (Word proficiency is a plus), • Able to use or learn Microsoft Office (Word, Excel) Preferred (Not Required) Skills: • Previous automation experience, • Electrical, controls, or system design experience, • AutoCAD experience Benefits: • 11 Paid Holidays, • Paid Time Off (PTO), • Employer-subsidized pre-tax health insurance, • Optional pre-tax vision, dental, and other insurance plans, • SIMPLE IRA retirement plan with employer matching Company DescriptionYou can find out more about our company and some of the work we have done at can find out more about our company and some of the work we have done at .

Job Description About Trotter Controls: Trotter Controls is a world-class provider of aerial firefighting systems, telemetry systems, turnkey control systems, and automation equipment. We are a technology-driven company with a diverse engineering and manufacturing focus, including: • Control systems design and fabrication, • Mechanical and automation systems, • In-house manufacturing technologies:, • 3D printing, • Laser welding, • SMT & through-hole electronics, • Traditional mechanical & electrical fabrication and assembly Position Overview: We are seeking a Mechanical Engineer / SolidWorks Designer to join our growing team. This is a great opportunity for a self-motivated, technically proficient team player who thrives in a dynamic environment focused on both R&D and continuous product improvement. Be part of a high-impact team that designs and delivers cutting-edge technology in a fast-paced and supportive environment. Primary Responsibilities: • Collaborate with the mechanical engineering team, • Assist in team coordination, task assignments, and project prioritization, • Mentor less experienced personnel, • Contribute to team output and act as a technical leader (player/coach role), • Produce and review detailed designs, drawings, and models, • Oversee the design process and progress of others Required Qualifications: • Strong Mechanical Engineering background, • Ability to perform mechanical engineering analysis (structures and parts), • Experience in:, • Mechanism / machine design, • Metal fabrication technologies (e.g., sheet metal, machining operations), • Design for manufacturability, time to market, and reliability, • Detail-oriented with experience in:, • Mechanical designs, assemblies, and 3D models, • SolidWorks for design work, • FEA using SimSolid and SolidWorks Ideal Candidate Attributes: • Team player with a strong work ethic, • Positive, can-do attitude with a focus on continuous improvement, • Able to self-manage and prioritize tasks, • Responsive to technical requirements, • Strong verbal and written communication skills, • Ability to document engineering details and processes (Word proficiency a plus), • Comfortable using or learning Microsoft Office tools (Word and Excel) Preferred (But Not Required) Skills: • Hands-on fabrication experience, • Automation experience, • Electrical/controls/systems experience, • AutoCAD experience, • Project management experience Benefits: • 11 Paid Holidays, • Paid Time Off (PTO), • Employer-subsidized pre-tax health insurance, • Optional pre-tax vision, dental, and other insurance plans, • SIMPLE IRA retirement plan with employer matching Company DescriptionYou can find out more about our company and some of the work we have done at can find out more about our company and some of the work we have done at .

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Natural Gas Designer to join our ICE team to improve infrastructure in our Texas offices. Candidates must have a high school diploma, and five or more years of drafting experience in the natural gas or utility industry. Experience with design programs (Civil3D) is required, and experience with CadWorx or Autodesk Plant 3d is a plus. Excellent technical writing, organization and communication skills are essential. Candidates must be self-motivated and able to work well with others. Knowledge of personal computer hardware and software configurations is required. A flexible hybrid-remote work schedule is available.Typical responsibilities include: • Responsible for interpreting, analyzing, organizing, executing and coordinating new design projects and/or revisions to existing projects of varying scales and complexity, • Apply engineering principles and procedures while performing engineering design work, • Perform design calculations as needed, • Provide design details as needed, • Seek resolutions on non-standard analytical problems, • Create estimated time requirements for projects, • Attend project-specific meetings to determine CAD schedules, • Save project-specific data on a daily and weekly basis, • Assist Project Managers as needed, • Attend meetings as needed, • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • High school diploma requiredSkills/Experience:, • 5 or more years of drafting experience in the natural gas or utility industry is required, • Knowledge of personal computer hardware and software configurations and familiarity is required, • Experience with Autodesk Civil 3D is required, • Experience on public utility projects is preferred

Job Description Who we are: Pattison ID helps companies deploy their identity for maximum consistency, engagement and impact across physical and digital signage, and branded environments. Our comprehensive signage solutions, including exterior, interior, wayfinding, and digital signage, redefine how brands connect with their audiences. Our Solutions: We offer architectural, digital services, sign maintenance solutions and flexible leasing options. As one of the largest companies in our industry, with 7 manufacturing facilities, 8 sales and operations offices, and over 1,000 employees across the US and Canada, Pattison ID is committed to offering a culture where team members can achieve their unique career ambitions, while embodying our Core Values of Innovation, Delight, Dependability, Involvement and Drive. Essential Functions: What you’ll do: * • Develop detailed 2D and 3D technical drawings, shop drawings, and fabrication documents using Revit and AutoCAD based on design concepts and project specifications., • Create accurate bills of materials (BOMs) and cutting lists for production., • Collaborate closely with the sales, design, engineering, and production teams to ensure designs are optimized for manufacturing efficiency and cost-effectiveness., • Interpret architectural plans, client specifications, and engineering requirements to develop appropriate sign solutions., • Identify and resolve design conflicts or technical challenges proactively., • Ensure all designs comply with relevant building codes, ADA requirements, and industry standards., • Manage and organize design files, ensuring version control and accessibility., • Participate in design reviews and provide technical input and recommendations., • Proven expertise in Revit and AutoCAD is essential. Please highlight your specific experience with these software platforms in your application., • Bachelor’s degree in Architecture, Industrial Design, Mechanical Engineering, or a related technical field, or equivalent work experience., • Minimum of 5 years of experience as a Technical Designer or similar role, preferably within the sign manufacturing, architectural, or fabrication industries., • Strong understanding of manufacturing processes, materials (e.g., metals, plastics, LEDs), and construction methods relevant to sign production., • Excellent spatial reasoning and ability to visualize complex 3D structures from 2D drawings., • High attention to detail and accuracy in all work., • Ability to work independently and collaboratively in a fast-paced environment., • Strong problem-solving skills and a proactive approach to challenges., • Excellent communication skills, both written and verbal. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is constantly required to sit and use hands to operate telephone, type and operate computer and mouse. • The employee is frequently required to talk, hear, and bend and twist neck., • The employee may occasionally lift and/or move up to 10 pounds and rarely lift and/or move up to 25 pounds., • 11 paid holidays, • 1 Paid Floating Holiday to recognize a special day of significance to you, • Generous Paid Time Off Policy, • Comprehensive health, dental, and vision benefits, • 401K Plan with Company matching,, • Hybrid Work Model, • On the job training and development, • Collaborative and Inclusive work environment

Job DescriptionAre you ready to take your drafting skills to the next level? Our client is seeking a talented AutoCAD Drafter in Arlington, TX to bring precision, creativity, and innovation to their engineering projects. In this role, you’ll be responsible for producing detailed fabrication drawings and comprehensive Bills of Materials (BOMs), ensuring every component is accurate and ready for production. You’ll work closely with the Purchasing and Fabrication teams, providing essential engineering documentation and support to keep projects moving smoothly and efficiently. If you're passionate about design, thrive on detail, and enjoy working in a collaborative environment where your contributions truly matter—this is your chance to make a lasting impact. Apply today and help shape the future of fabrication and design! Requirements: • Must have 1 to 3 years of related experience in a manufacturing environment, • Must have knowledge of ASME VIII-1 Code design and fabrication requirements, • Proficient in use of AutoCAD for 2-D traditional drafting techniques, • Must have experience using SolidWorks, • Basic familiarity with welding concepts, • Mechanical Designer- Pressure Vessels and ST Heat Exchangers, • Must have an Associate degree in a technical discipline, • Must have working knowledge of Microsoft Office Hours: Monday-Friday, 8:00 AM-5:00 PM Benefits: • Health Insurance, • 401k, • Paid Time Off Compensation: $20.00-$22.00/hour For immediate consideration, apply now! RC77743493 #ZR

Job Description We are RED Group. And We're Thinking Ahead. RED Group is an Industrial Control Systems (ICS) technology development and integration firm specializing in Process Automation, IT/OT Consulting, and Industrial Cybersecurity. We stand out in experience and expertise. We are committed to an employee-centric culture of success where we put our people first and give our staff the opportunities and push that they need to succeed and improve. As a result, they give their utmost to help our clients and get better at what they do each day. Our mission is to add value to our clients' organizations by selecting and deploying the proper resources and technology to ensure their goals are realized. Our team of Engineers, Consultants, Programmers, and Technicians provide the valuable expertise necessary for efficient and secure ICS/OT environments. Our North Texas office continues to expand and we are seeking a driven Sr. Industrial Control Systems (ICS) Engineer to become an integral part of our team. Step into a dynamic role that blends in-office collaboration with on-site client support, offering the ideal mix of variety and challenge. If you're ready to make an impact, now is your chance to TAKE CONTROL and join our team! This role supports active, ongoing projects that require local travel. About the Role The Sr. Industrial Control Systems (ICS) Engineer is responsible for the implementation of control systems and DCS/PLC/SCADA programming. This includes a working knowledge of Electrical, Instrumentation, and Industrial Control Systems/IT - specializing in design, development, programming, integration, troubleshooting, commissioning, start-up and control system optimization. The Sr. Industrial Control Systems Engineer is expected to be a technical lead on projects providing technical guidance to less experienced engineers and support their professional development. Key Responsibilities Experience in more than one of the following areas is preferred, but not required: • Program and configure PLC, HMI, DCS and SCADA systems., • Design, configuration, integration, and implementation of automated equipment., • Develop software/hardware design specifications., • Design, write, test and document PLC/HMI software., • Create Control Narratives, Logic Diagrams, Cause & Effect Diagrams, and Network Diagrams., • Develop and execute control system validation/testing protocols., • Troubleshoot, test, and start-up control systems onsite., • Participate in site visits and meetings as required by project., • Consult with clients to ensure project success., • Interact with project managers/team leads, clients, and other third parties., • 8+ years of control systems design and programming experience, focusing on PLC, HMI, and SCADA systems preferred., • Modicon PLC programming languages: Control Expert, Unity, Concept., • Rockwell Automation Software: Logix Designer, Studio5000, RSLogix5000, RSLogix500., • OIT/HMI software development: Wonderware, Intellution, FactoryTalk ME/SE, VTScada, Ignition (Perspective & Vision)., • Experience with Ignition Software highly desired. Inductive Automation Ignition Core Certification Preferred; Gold Certification a Plus., • Experience with common control system documents (P&IDs, I/O Lists, C&E Matrices, etc.)., • Experience with control systems instrumentation and end elements basic operation and electrical interfaces., • Experience with start-up and commissioning of automation systems., • Experience with control system networking technologies (including industrial communications protocols) and PC networking technologies., • Experience with motor control systems and variable frequency drives (VFD)., • Must be able to travel to customer sites in the surrounding area as needed to support project and client requirements., • Ability to partner with clients, vendors, and other team members to deliver projects., • Ability to manage multiple projects and priorities., • Strong interpersonal, verbal, and written communication skills., • Embrace our core values while enjoying a collaborative and engaging atmosphere:, • Be Dependable, • Cultivate Relationships, • Strive for Excellence, • Foster and promote a strong safety culture and follow company safety protocols. Culture. Growth. Opportunity. At RED Group, we believe that a thriving workplace starts with a strong, employee-centric culture. Our focus on our people ensures they have the resources, support and opportunities needed to excel. Our commitment to success drives outstanding results in our client engagements, with our team always striving for excellence. If you join RED Group, you'll enjoy: • A collaborative team environment that values your contribution., • Competitive benefits, flexible schedules, and hybrid remote work options., • The stability of a well-established company poised for exciting growth.

Job Description Qualifications: Post: Bentley OpenPlant Mechanical Designer Senior • Proficiency with Bentley OpenPlant and OpenBuildings, • Strong Knowledge of Bentley ProjectWise, • Proficiency with Navisworks Manage, • Experience with AutoCAD and Revit, • Strong problem-solving skills, • Strong work ethic and commitment to meet project requirements and deadlines, • Communication and collaboration skills to work effectively on multi-disciplinary teams, • At least 5 years experience producing complex BIM models and construction drawings in an engineering and consulting environment., • Experience with plant design required., • The power utility market is undergoing rapid and dramatic changes, with drivers such as artificial intelligence and the electrification of infrastructure expected to create exponential load growth for power utilities across North America. In response, the company is expanding its Energy & Power Solutions team to expand the delivery of reliable power solutions to the North American market., • By joining our team, youll have the opportunity to deploy your technical skills to develop design models and construction drawings for exciting projects that will impact the energy landscape of tomorrow. We have an immediate position available for a Senior Process Design Professional with expertise coordinating BIM models in the Bentley OpenPlant environment. Your responsibilities will include coordination with multi-discipline teams to produce innovative three-dimensional design models and construction drawings., • You will be working closely with our engineering staff to support a diverse range of international multi-sector clients. If you are excited by the possibilities of working on projects that will shape our world for the next generation, this is the place for you. Come join our growing team to shape the future of energy!

“Join the Acme Family” ENGINEERING DESIGN MANAGER FLSA Status: Exempt Acme Brick Company (a Berkshire Hathaway Company) is an organization of professionals in the manufacturing and building material distribution industry. We manufacture brick and distribute our own brick as well as brick and associated products manufactured by others. We operate in 13 states with a philosophy that we are much more than a brick manufacturer and distributor. Summary We are seeking a “best in class” Engineering Design Manager that will provide engineering principles, design, specifications and technical services to the construction, planning, and design of buildings, equipment and other structures. They often work with other engineers and with architects, who focus on function layout or aesthetics of building projects. The work often encompasses elements of other various engineering disciplines, including, civil, mechanical, electrical, fire protection, and others. The Engineering Design Manager assists and directs the engineering designer associates in the completion of assignments heavily related to architectural masonry shapes, quantity take-offs for our sales associates and plant equipment design drawings. The Engineering Design Manager is responsible for managing, directing and assisting the engineering associates with AutoCAD and the work product created and stored. This candidate has experience in the design, specification, and construction of commercial and industrial facilities. The ideal candidate has a natural ability to roll with the punches, being flexible to handle anything that might come their way. You will be a strong and reliable support to company operations. Not only will your efforts allow us to achieve organizational efficiency, you will nurture the pleasant work environment our people love. Essential Duties and Responsibilities (other duties may be assigned) This is a safety sensitive position. • Understand and consider the risks of all work you engage in or provide support on, • Provide support, both onsite and by phone to associates in the field, • Performing project research and completing technical design tasks, • Prepare opinion of probable cost, construction specifications and contract documents, • Ability to read and interpret technical documents, • Handle multiple projects and priorities at one time, • Develop scope, completion of or direction of engineering designs, specifications, RFQ packages, capital request development, and upon approval the actual construction, • Manage Subscriptions for all AutoDesk products, • Work in accordance with company standards and values with project team for a variety of projects Skills and Experience Required for Success • Experience in the design, specification and construction of commercial and industrial facilities from foundations through to finish out, • Ability to design and detail new structures or analyze existing structures, calculate and certify load rating, • AutoCAD, Revit, Bluebeam, and MSOffice experience required, • Experience in Civil 3d preferred, • A thorough understanding and grasp of engineering design principles required, • Attention to detail required, • Able to set and meet design schedules and deadlines, control costs, scheduling, change orders, general meeting and reporting, • Surveying skills are a must, primarily utilizing Total Station, • Direct and assist fellow associates in utilization of AutoCAD, • Provide organized leadership and engineering expertise in executing engineering projects, • Be effective in communication and following up with all managers involved with capital expenditure projects, • Be effective in providing feedback to senior management on the planning, execution process behind the capital projects being dealt with, • Ability to work independently and as a team player, • Ability to meet plan delivery deadlines when assigned, • Willingness/ability to assume increased responsibilities when presented, • Excellent communication, critical thinking, and problem-solving skills Competencies Required for Success • Integrity, • Trustworthy, • Teamwork, • Relationship Building, • Quality Focused Qualifications • BS Civil Engineering required, Architectural experience a major plus, • EIT, PE license preferred We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Job Description Bring your menswear expertise to a company where craftsmanship, collaboration, and family values define the culture. This is an opportunity to join a family-owned fashion manufacturing company based in Fort Worth, Texas, where your technical design precision will shape high-quality men's apparel worn across the country. Work alongside creative and production teams that value tradition, innovation, and excellence in design. As the Senior Technical Designer for menswear, you will be part of a team that takes pride in designing garments that combine comfort, style, and durability — while having your technical expertise recognized and respected every step of the way. Senior Technical Designer (Menswear) – Your Job Duties You will oversee all technical aspects of menswear product development, from concept through production, ensuring garment fit, construction, and quality standards align with brand and market expectations. You will: • Create and maintain technical packages (tech packs) including detailed specifications, construction notes, and BOMs, • Review design sketches and translate them into technical specifications for production, • Conduct fittings on live models and mannequins, communicating fit comments to pattern makers and factories, • Collaborate with design, product development, and sourcing teams to ensure design intent is maintained through final production, • Troubleshoot pattern and construction issues, recommending solutions to improve quality and efficiency, • Manage garment grading, pattern corrections, and measurements for all men's product categories, • Communicate directly with domestic and overseas factories regarding technical specifications, pattern revisions, and production approvals, • Approve samples and pre-production garments for fit, fabrication, and quality, • Track sample development calendars to ensure deadlines are met across multiple programs Senior Technical Designer (Menswear) – You Have (Required Skills, Experience & Team Fit) You have: • Prior experience as a Technical Designer, Fit Specialist, or Pattern Engineer within the menswear apparel category, • Strong understanding of garment construction, patternmaking, and fabric behavior, • Proficiency with technical design software such as Gerber, or Clo3D, and PLM systems, • Prior experience working with factories on pattern approvals, construction methods, and quality standards, • Knowledge of size specifications, grading, and fit for men's apparel across various product types (woven shirts, denim, outerwear, and knits), • A detail-oriented mindset, with a strong ability to communicate technical feedback both visually and verbally, • A collaborative work style, able to partner cross-functionally with design, sourcing, and production teams Senior Technical Designer (Menswear) – You Might Have • Experience with Centric PLM system, • Experience with Clo3D development tool Senior Technical Designer (Menswear) – Benefits for You • Base salary starting range is $70,000 to $95,000, commensurate with experience, • Company-sponsored medical, dental, and vision insurance options, • 401k with company contribution, • Paid holidays, paid time off, supplemental life, supplemental insurances, and more (including a retail clothing discount and stipend!), • This role is in the office, Monday through Friday

Graphic Designer Job Duties: Prepares work to be accomplished by gathering information and materials. Maintains technical knowledge by attending design workshops; reviewing professional publications; and participating in professional societies. Illustrates concept by designing rough layout of art an

Job Description TNP has an immediate opening for a Senior Project Manager to join its Transportation Group in our Fort Worth or Katy, Texas office. A successful candidate will be one who is self-directed, service-driven, team-focused, and customer-oriented. They are responsible for project planning, scheduling, and maintaining client relationships, as well as overseeing staff charged with the development and delivery of transportation projects, including city street and TxDOT highway improvements. The Senior Project Manager position provides an excellent opportunity for personal & professional growth, and the opportunity to have a strong leadership role in the growth and development of the team. Responsibilities • Preparing and/or managing the technical design, plan production, and delivery of transportation projects as required and/or assigned, • Preparing and/or managing the preparation of construction documents for public and/or private public works infrastructure projects (i.e., grading, street, highway, drainage, water, and sanitary sewer improvements) from conceptual to final design, • Preparing and/or managing the preparation of proposals, design plans, reports, opinions of probable cost, construction specifications, and contract documents, • Establishing strong communication and collaborative working relationships with team members & clients, • Organizing & scheduling your own work, and directing the work of other team members in order to accomplish project goals within established budgets and schedules, • Effectively coordinating & collaborating with technical experts, other engineering design teams, and sub-consultants, • Establishing strong client relationships and communication, • Maintaining strong overall financial performance, • Guiding the work of Civil Engineers & CAD Designers Education/Registration • B.S. in Civil Engineering, • Licensure as a Texas Professional Engineer (Civil), • TxDOT pre-certifications in applicable roadway transportation categories Professional • Responsive and results-oriented in service to clients and the design team, • A minimum of 10 years (10+) of experience in transportation design (i.e. city street, drainage, highways, freeways, and traffic), • Three (3) years minimum experience in the local transportation market working with TxDOT and other local governmental entities, • Proficiency using OpenRoads Designer with prior experience using MicroStation/GeoPak to design and deliver TxDOT deliverables is required, • Proficiency with Microsoft Word and Excel required, • Strong commitment to professional development, • Demonstrated ability to develop solid working relationships with other team members in a team-oriented environment, • Demonstrates ability to communicate with and lead on and off-site production team members, • Ability to organize, manage & complete multiple tasks and assignments in a schedule-sensitive environment, • A competitive base salary, dependent on skills, qualifications, and experience, • Supplemental pay for additional hours worked in excess of 43 hours, • Generous performance-based bonus opportunities, • Medical, dental, and vision insurance, all beginning on the first day of employment, • Life and disability insurance, • A 401(k) plan with a partial company match, • A Health Savings Account, • Paid time off, • In-office gym, • An extensive learning and development program, • Tuition reimbursement, • Financial Advising

Job Description Design the Future of Infrastructure Innovation isn't just a buzzword its the blueprint behind every road, subdivision, and site we touch. As our Senior Civil Designer, you'll play a vital role in transforming visionary concepts into real-world designs that shape the communities of tomorrow. You wont just be drafting plans you'll be engineering progress. From grading and drainage design to collaborating with multi-disciplinary teams, you'll bring creative precision, problem-solving power, and technical mastery to every project that passes your desk. If you thrive in a fast-paced environment where collaboration, excellence, and ingenuity drive success, this is your opportunity to lead from the drawing board forward. What You'll Do Lead Design Excellence • Manage and produce civil design and construction drawings across commercial, residential, industrial, and public infrastructure projects., • Apply your expertise in AutoCAD Civil 3D to craft detailed, compliant, and buildable designs that stand up to real-world conditions., • Partner closely with Project Managers, Engineers, and sub-consultants to ensure alignment across every stage of project development., • Participate in Project Kickoff Meetings and Design Charrettes, contributing insights that elevate design quality and client satisfaction., • Lead Construction Drawing completion delegating tasks, reviewing checklists, and performing QC on all assigned sheets., • Prepare quantity take-offs, exhibits, and detailed cost estimates to support project proposals and design submissions., • Support and train junior drafters and designers, helping develop the next generation of civil design talent., • 8+ years of experience in Land Development and 5+ years of hands-on experience with AutoCAD Civil 3D., • Deep knowledge of civil infrastructure design including grading, drainage, paving, water, and sewer systems., • Strong ability to interpret and integrate consultant drawings, reports, and survey data into construction documents., • Proven record of managing competing priorities, meeting deadlines, and maintaining meticulous attention to detail., • A collaborative, proactive, and professional demeanor with excellent written and verbal communication skills. Self-motivated team player who thrives in a fast-moving, innovation-driven environment. Natural mentor eager to share knowledge and elevate those around you. Committed to quality, accuracy, and continuous professional growth. Ready to Build What's Next? Join Us and bring your expertise to a firm where design meets innovation, and every line drawn helps shape the future of infrastructure.

Job Description Qualifications: • Bachelor's degree in Architecture from an accredited architectural programme, • Professional Architectural License and be able to be licensed in multiple states (*AIA), • At least 8 years of professional Architectural Design experience, • Expert-level proficiency with REVIT, AutoCAD, Sketchup, and Adobe Suite, • Knowledge of building codes and applicability to industrial facilities, • Understanding of scopes of work, developing budgets, and reviewing schedules, • Master's degree in Architecture, • Prior Data Center Design Experience, • As an Architect Professional in our Data Centers group, youll contribute to projects that enable the heart of our clients successful data center facilities engineering, design and construction. In this role, you will have the chance to work on projects including engineering and design of data centers and other mission-critical facilities. Youll be accountable for the schedule and technical quality of challenging engineering tasks as you gain familiarity with the clients expectations, scope, budget, and schedule. This is a hybrid US location flexible role., • Collaborating with a team of designers and engineers as Architect/Architectural Designer, youll help us engage with clients and subcontractors, designing some of the worlds most advanced data center facilities. Your multi-discipline, highly interactive team will work together to deliver construction documents., • Plan and conduct work requiring judgment and evaluation, selection, and adaptation of architectural techniques and criteria., • Exhibit a high level of attention to detail and quality control, • Perform calculation checking of others work., • Collaborate with other designers in the development of layout, technical design, construction drawings, specifications, and model creation., • Attend project meetings and take an active role in helping the team resolve concerns and solve problems across all disciplines., • Participate in and champion internal, cross-discipline, and external project quality reviews., • Support field construction efforts, including reviewing submittals, responding to questions from clients and contractors, and performing field walks., • Perform technical and business presentations with clients and employees., • Perform quality reviews on designs performed by others., • Participate in developing proposals, budgets, and schedules for process-specific work. The candidate must be able to work in one of the following offices two days per week: Fort Worth, TX; Cary, NC; Philadelphia, PA; Denver, CO; Chicago, IL; Greenville, SC; Omaha, NE; Arlington, VA; Phoenix, AZ. No visa sponsorship. Must have a professional architect licence.

Content Strategist 12 Months Contract Fort Worth, TX Not open to H1B candidates at this time. 70% work onsite. 1 virtual interview and 1 in-person interview Can be extended through 2026. Why youll love this job: Were a multidisciplinary UX team that drives the user experience for both customer and employee-facing applications. In this position, youll be working with the Senior UX Designer and be responsible for creating content across our employee facing customer service tool. Youll get experience and insight into understanding business requirements, user research and work with product teams to deliver clear, consistent, customer-focused content. What youll do: In this position, youll be responsible for planning, creating and managing content across multiple digital channels. The UX Content Designer has a deep understanding of the content planning, tone-of-voice, style and formatting needed to maintain consistency and brand identity. Youll partner with UX Product Designers and product teams to provide relevant, customer-focused content based on the understanding of our customers and employees behaviors, needs and pain points. Youll participate in user research to understand and analyze the performance of content, identify areas for improvement and optimize messaging to ensure it resonates with our end users. This job is a member of the Technology Strategy & User Experience (UX) team within the Information Technology division at ***. Principle duties and responsibilities: Provide content strategy to ensure relevant content is delivered contextually Collaborate on a content roadmap and conduct content audits Establish and maintain operational processes and procedures for managing content requests and delivery Lead content governance and implementation of best practices at an enterprise level Work with product stakeholders and bring them along as you provide content to ensure messaging is optimized and successful Coach and mentor others on content strategy best practices Create documentation based on user groups to understand the tone and voice Artifacts you will deliver scripts, content strategy, knowledge base articles, and content embedded within the product All youll need for success: Minimum qualifications - education and prior job experience Bachelors degree in English, journalism, technical writing or equivalent experience / training 5+ years creating and executing digital content strategy across multiple channels Extensive experience planning for and developing useful, usable content including instructional text, error and confirmation message, taxonomy and SEO Preferred qualifications - education and prior job experience: Masters degree in English, journalism or technical writing Experience using a content management or knowledge management system and agent-facing applications Experience with technical projects involving AI / machine learning Travel industry experience Skills, licenses and certifications: Superior writing, editing and proofreading skills: You understand the importance of clearly and concisely communicating for digital channels. A proven track record of collaboration across product and UX teams: You can translate complex concepts into easy-to-understand interactive experiences. A passion for creating great digital user experiences with actionable knowledge of the digital landscape: Keeping up with industry and user trends, emerging technologies and best practices and trends is fun for you. Youre able to influence decision makers. A passionate advocacy for effective, user-friendly communication: You can talk about the importance of consistent messaging across multiple channels and make a case for a strategic approach to content delivery. Collaborate with multiple stake holder groups to gain alignment and input related to content needs.

Job Description Qualifications: Post: Bentley OpenPlant Electrical Designer Senior Here's what you will need: • Advanced Proficiency with Bentley OpenPlant, • Strong problem-solving skills, • Strong work ethic and commitment to meet project requirements and deadlines, • Communication and collaboration skills to work effectively on multi-disciplinary teams, • At least 5 years experience producing complex BIM models and construction drawings in an engineering and consulting environment., • The power utility market is undergoing rapid and dramatic changes, with drivers such as artificial intelligence and the electrification of infrastructure expected to create exponential load growth for power utilities across North America. In response, the company is expanding its Energy & Power Solutions team to expand the delivery of reliable power solutions to the North American market., • By joining our team, you'll have the opportunity to deploy your technical skills to develop design models and construction drawings for exciting projects that will impact the energy landscape of tomorrow. We have an immediate position available for a senior electrical design professional with expertise coordinating BIM models in the Bentley OpenPlant environment. Your responsibilities will include coordination with multi-discipline teams to produce innovative three-dimensional design models and construction drawings., • You will be working closely with our engineering staff to support a diverse range of international multi-sector clients. If you are excited by the possibilities of working on projects that will shape our world for the next generation, this is the place for you. Come join our growing team to shape the future of energy!

Job DescriptionSalary: $70,480 - $100,720 MSE Environmental is a growing full-service environmental consulting firm seeking a Level 3 Industrial Hygiene Environmental Field Technician / Consultant (Asbestos, Mold, Lead) professional. The successful candidate will enjoy conducting a variety of field and office tasks in support of mold, asbestos, legionella, water damage consulting, lead consulting, indoor air quality assessment, environmental site assessment, and site characterization projects. Tasks may include collection of field data, sample collection, abatement monitoring and oversight, research and review of regulatory records, directing subcontractors, data evaluation, technical report preparation, and project management. We are seeking individuals desiring long-term career opportunities. The position includes excellent mentoring and training opportunities and the opportunity to learn or participate in other aspects of environmental consulting. Job Responsibilities • Conduct microbial, lead, asbestos, soot, water, water damage consulting, and industrial hygiene inspection and sampling., • Prepare inspection reports based on the inspection findings., • Conduct Project Designs and Management plans., • Conduct Silica sampling and negative exposure assessments., • Conduct Asbestos negative exposure assessments., • Conduct Asbestos and lead abatement oversight., • Conduct Mold Assessments, • Perform Legionella Water Inspections and Management Plans, • Conduct water damage consulting assessments, moisture mapping, and structural dry-down pyschometrics., • Consultant will drive to job sites daily and travel for work 80-100% of the time., • Consultant will work from the office from 8 - 5 pm normal business hours (Required), • The right individual will perform various duties, including, administrative tasks, errands, field tech support, • Candidates must be able to perform work with minimal supervision, respond and learn quickly., • Follow and live by the MSE Environmental Foundations of our Brand ( On website), • Create training manual and standard operating procedures (SOPS) for all environmental services, • Create Google slides presentations on technical topics and present to MSE Environmental clients, • Other related duties as assigned. Job Qualifications The successful candidates will be required to speak, read, and write English. Previous asbestos consulting experience is required w. OSHA Hazwoper certificate, lead assessor registration, NIOSH 582, and working knowledge of Microsoft Word, Excel, and Adobe Illustrator are pluses. The ability to properly wear and use personal respirator equipment and other forms of personal protective equipment is required. Candidates should have excellent verbal and written communication skills, a POSITIVE attitude, good organizational skills, a strong work ethic, GREAT customer service and be reliable. Candidates must have a current valid driver's license with a clean driving record. Education/Experience • Current AHERA Management Planner and Project Designer (Required), • Active Individual Asbestos Consultant License Texas (Required), • Current Air Monitor Technician / PM License Texas (Required), • Current Asbestos Inspector License Texas (Required), • Current Management Planner and Project License Texas (Required), • Current EPA Lead Inspector Certification (Not Required but a plus), • Current EPA Lead Risk Assessor Certification (Not Required but a plus), • Mold Assessment Consultant License (Not Required but a plus), • Valid State Driver's License and auto insurance and reliable vehicle for transportation (Required), • A Good driving record with no points (Required), • At least 5 years as an Industrial Hygienist or Environmental Technician preferred (Required), • Literacy in Microsoft Office, Word, Windows 10, Google Searches, Gmail, SmartPhone technology Skills • Excellent verbal and written communication, • Critical thinking, • Coordination, • Monitoring, • Time management, • Organization Management, • Project management, • Active listening, • Judgment and decision-making, • Complex problem solving, • Strong work ethic, • Reliability, • Attention to detail, • Works well under pressure, • Excellent computer skills, • Excellent smartphone skills Local candidates are preferred. Work Schedule • An 8-10 hour workday working at the office., • Additional after-hours/weekend work is required and performed on a rotating and as-needed basis., • May require travel out of town and be available night and weekend work., • Handle approximately 25 projects per week from start to finish. Physical Demands • Ability to comply with work safety requirements, • Operate a motor vehicle and willingness to travel for long periods of time in the vehicle between projects, • Visually distinguish between colors, • Detect and receive messages over the phone and email, • Setup and takedown company event equipment as needed, • Ability to lift 50-75 lbs and pass annual medical and respiratory fit test exams., • Ability to climb ladders, crawl in crawlspaces, climb roofs, and access other difficult areas., • Must pass a pre-employment background check and drug screen, • Must maintain a professional appearance, • 21 years of age and older, • Must live within daily driving distance of the office Work Environment Job duties are primarily performed at project/job sites within the Environmental Hygienist's assigned region and include extensive travel between sites and laboratories. Benefits • MSE offers a comprehensive, highly competitive compensation package including health benefits with medical, vision, dental plan, and more., • Earned paid time off and paid holidays included., • MSE Environmental is an equal-opportunity employer and promotes a drug-free workspace., • Salary or Wage commensurate with experience., • Full-Time Employment, • Bonus Opportunities

Job Description Teague Nall and Perkins, Inc. (TNP) is an engineering and design consulting firm serving clients throughout Texas. Our Marketing team has an immediate opening for a full-time Graphic Designer in our Fort Worth office. The successful candidate will be integral to the continued success of the company, with significant opportunities to support and enhance how TNP presents itself across a wide array of marketing materials and mediums. This graphic design role is critical to the support and expansion of the company’s branding and marketing efforts. As Graphic Designer, you will work with a diverse, highly-creative group of professionals to create materials for proposals, marketing collateral, conferences, social media, and other internal and external projects. Through collaboration with Marketing staff and other key firm personnel, you will be responsible for the design and development of creative content consistent with our corporate brand. We are looking for a naturally engaging storyteller who can take technical concepts and translate them into impactful, accessible visuals that demonstrate TNP’s identity and value to clients, the public, and our employees. Candidates will be asked to submit a portfolio of sample work as part of the interview process. Portfolios demonstrating conceptual thinking and strong graphics skills will be given prime consideration. Responsiblities • Work with marketing and technical staff to conceptualize graphics for proposals and other efforts, • Develop graphics for proposals and presentations, including covers/tabs, renderings, and specialty imagery, • Create layouts for proposals, resumes, and project sheets, • Create custom iconography and marketing materials for projects (internal and external), • Support and enhance existing branding for marketing materials, including collateral, presentations, brochures, templates, website, social media, print, and digital pieces, • Uphold and enhance our Brand Standards, • Assist with the continued development of the TNP brand identity Education/Certification • Bachelor’s degree in Graphic Design, Digital Design, Visual Communication, or other design-related fields, • Applicants must have a valid driver’s license Professional Requirements: • 2-5 years of graphic design experience preferred, • Previous experience working in a professional environment. (Previous experience at an A/E/C firm and/or with marketing teams is preferred but not required), • Strong design sense and vision, • Ability to communicate brand voice through graphics & visuals, • Understanding of brand standards and guidelines, • Ability to meet hard deadlines and create, communicate, and manage a revision schedule to do so, • Ability to creatively transfer complex technical concepts into easily-understood visuals, • High level of proficiency with Adobe Creative Suite, specifically InDesign, Illustrator, and Photoshop, • High level of proficiency with Microsoft PowerPoint and other Office 365 applications, • Experience creating/editing in Adobe After Effects, Premiere Pro or similar is a plus, • Thorough understanding of typography, layout, color, and all other elements of design, • Moderate photography skills a plus but not required, • Responsive and results-oriented service to staff, • Ability to manage and schedule work to meet objectives & deadlines, • Thrives in creative environment. Willing to accept a balanced workload of different types of tasks crucial to the success of the business., • Ability to take direction well and to ask questions when needed, • Team player with a positive attitude and a commitment to a positive work environment, • Ability to accept constructive feedback and creative review professionally in order to satisfy creative requirements, • Generous performance-based bonus opportunities, • Medical, dental, and vision insurance, all beginning on the first day of employment, • Life and disability insurance, • A 401(k) plan with a partial company match, • A Health Savings Account, • Paid time off, • In-office gym, • An extensive learning and development program, • Tuition reimbursement, • Financial Advising

Job Description M&S Engineering, LLC seeks qualified candidates that are highly organized, energetic, self-motivated with the ability to work independently or as a team for the non-exempt position of Senior Electric Distribution Designer. The position will produce electric distribution field designs, staking of distribution facilities, project estimation and preparation of construction prints using electronic design/estimation software in accordance with the client’s standards of construction and specifications. This position will report to the office and is not remote. Requirements Include: • Six (6) years’ prior experience with electric distribution design and estimation., • Strong background in both overhead and underground electric distribution line design, standards of construction and design guidelines., • Ability to represent self professionally in both M&S and the client’s image while meeting with property owners, other engineering firms and construction resources., • Ability to stay abreast with the changing technologies, work planning, and design methodologies associated with Electric Distribution Design., • Ability to mentor and/or train others staff members to transfer personal design knowledge to others., • Proficient with the design of both overhead and underground electric distribution facilities., • Recognition of electric distribution framing and components 4kV through 35kV, to initiate designs for construction or reconstruction of both overhead and underground distribution facilities., • Use of electronic design/estimation software to prepare cost estimates using unitized labor and material units, work instructions and construction sketches as detailed by client., • Use of surveying equipment and gathering of geospatial points., • Ability to interpret and apply the NESC to electric distribution line design., • Ability to provide all information and interpret the processes for permit acquisition involving TxDOT, City, County, State and Federal applications., • Ability to perform distribution line design calculations for structure loading, guying, geometric angle calculations, conductor sag interpretation, unitized framing design, construction practices and construction safety guidelines using industry tools and methods., • Ability to take personal responsibility for the quality, accuracy and time constraints of work product., • Possess strong analytical and technical problem solving skills., • Ability to multi-task several projects through different requirements of design iterations and priority shifts., • Proficient with the use of a laptop computer, and related software programs including, MS Outlook, MS Excel and MS Word., • Ability to communicate effectively, orally and in writing., • Strong skills of time management and multi-tasking., • Ability to work outdoors for extended hours in various climate conditions and travel, including overnight stays for up to five nights., • Ability to walk over and across various terrain and carry surveying instruments, field and staking equipment for the purpose of laying out staking for Electric Distribution Design., • Prefer an Associate’s degree or certificate in Electric Power Technology., • Knowledge of the operation and maintenance of electrical distribution systems., • Knowledge of joint construction and electric utility best practices., • Prefer the ability to interpret property line boundary, topographic surveys, as-built surveys, construction staking, ROW staking and collection of geospatial points., • Salary commensurate with experience, • Employer paid health/dental/vision insurance, • Employer paid STD/LTD, • Life Insurance, • Candidate referral bonus, • 401k retirement plan with employer match, • Paid Holidays, • Earned vacation time

Job DescriptionCompany Description We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description As an I&C Designer at Olsson, you will support the development of high-quality engineering solutions for data center projects. You'll assist in preparing instrumentation and controls design documents, collaborate with engineers and other disciplines, and help ensure designs meet project requirements and safety standards. Primary Responsibilities: • Prepare instrumentation engineering/design deliverables including:, • Instrument Index, • Instrument Data Sheets, • Installation Details, • Instrument Location Plans, • Wiring Diagrams and Loop Diagrams, • Develop control systems (DCS/PLC) data sheets and design documents:, • I/O Lists, • Process Control Narratives, • Graphic Sketches, • Cause & Effect Diagrams, • Alarm Rationalization, • Coordinate with third-party control system vendors and participate in Factory Acceptance Tests (FAT)., • Develop and review P&IDs for various projects., • Select and size I&C components such as valves, thermowells, orifice plates, and relief valves., • Collaborate across disciplines to develop level sketches and ensure design integration., • Review vendor documentation and provide technical recommendations., • Mentor junior engineers and support team development., • Ensure compliance with company and project site safety policies., • Designing innovative and reliable control systems that enhance operational efficiency., • Collaborating across disciplines to create integrated engineering solutions., • Staying current with emerging instrumentation technologies and industry standards., • Mentoring others and fostering a culture of continuous learning and improvement., • Experience in Electrical Engineering, Mechanical Engineering, or a related field., • Associate's degree preferred, • 5+ years of experience in instrumentation and controls design, preferably in data center or industrial projects., • Proficiency in engineering design software and tools, including REVIT., • Strong understanding of control systems (DCS/PLC), instrumentation technologies, and industry standards., • Excellent communication and collaboration skills with internal teams and external vendors., • A proactive mindset and commitment to delivering solutions that meet technical and safety requirements. #LI-DD1 Additional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: • Engage in work that has a positive impact on communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.