Trabajos 16 hour en PeterboroughCrear alertas

Contract Development Engineer Location: Peterborough (Fully Onsite) Hourly Rate: £42.77 per hour Equivalent Day Rate: £320.78 per day (Based on a 37.5-hour week) Duration: 12 Months (Strong likelihood of extension) Working Hours: 37.5 hours per week (Flexible start/finish times: Mon-Thu 8:30-16:45, Fri 8:30-16:15) We are seeking a skilled and collaborative Development Engineer to join a close-kn... ZIPC1_UKTJ

Bench Joiner based in Newark Benefits: Location: Newark Salary: £14 to £16 per hour DOE Contract: Permanent Hours: Full-time 40 hours Monday to Friday 9am to 5pm (early finish on Fridays) + Potential overtime Kitchen Bench Joiner role overview: We are seeking a highly skilled Kitchen Bench Joiner to join our client's bespoke manufacturing team. This role is ideal for an experienced joiner who takes pri... ZIPC1_UKTJ

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Stevenage cluster, covering areas like Stevenage, Hitchin, Letchworth Garden City, Welwyn Garden City, Hertford. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Stevenage cluster, covering areas like Stevenage, Hitchin, Letchworth Garden City, Welwyn Garden City, Hertford. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Join the RAC as a Mobile Vehicle Technician in our SMR Division - a new era of mobile repair. • A competitive base salary of £40,178, with on-target earnings of up to £52,000, • A guaranteed overtime option to increase your base salary, plus additional overtime and bonus opportunities, • 40 hours per week, with core hours from 8:30 am to 5:00 pm, and 1 in 4 Saturdays. A Different Kind of RAC Role: Welcome to SMR The RAC is known for roadside rescue - but this isn’t that. Our Service, Maintenance & Repair (SMR) division is a newer, fast-growing part of the RAC, built to deliver planned, structured repair and servicing directly to members - from their driveway to their workplace car park. There are no emergency callouts, no unpredictable shift patterns and no roadside recoveries. Instead, you’ll work through a scheduled list of jobs, with the time, tools and support you need to do quality work. Where you’ll work You’ll be part of the Stevenage cluster, covering areas like Stevenage, Hitchin, Letchworth Garden City, Welwyn Garden City, Hertford. You’ll be out on the road in your local area, working through a clearly planned schedule of appointments - no reactive callouts, just organised, pre‑booked work where you can focus on doing the job properly. What to expect Your day starts with a clear digital schedule. Each job is pre‑booked, with the member expecting you. You’ll carry out: • Routine servicing, • Diagnostics using advanced mobile equipment, • In‑depth repairs you’d normally complete in a workshop, • Member advice and recommendations based on your inspection, • Vehicle safety checks aligned to RAC standards And because SMR is structured, you’re not reacting to breakdowns - you’re delivering planned work that you can prepare for. From day one, you’ll have everything you need: a fully equipped RAC van, fuel card, uniform, full tool set and advanced diagnostics. You’ll use your technical skill and problem‑solving ability to get people moving again; safely, quickly and confidently. Why SMR is different (and why techs love it) • Planned appointments instead of emergency responses, • Consistent workflow instead of unpredictable demands, • In‑depth repairs, not roadside temporary fixes, • Time to do the job properly, with support and parts ordering built in, • Clear schedules using RAC’s mobile service platform It’s the ideal role for techs who want variety and independence without the reactive nature of Patrol. What you’ll need: • Level 2 qualification in Light Vehicle Maintenance (or equivalent), • Minimum 2 years’ experience as a vehicle technician working on light vehicles, • A full UK driving licence with fewer than 6 points No CV required when you apply and it takes just 5 minutes – it's easier than ever to start your journey with us. As a Mobile Mechanic at the RAC, you’ll get benefits that go the extra mile: • Earnings That Motivate - enjoy a market-competitive base salary of £40,170, with the opportunity to increase your earnings up to £52,000 through bonuses and premium-rate overtime. A full-time 40-hour week, with Monday–Saturday availability (8am–8pm), offers flexibility and stability, • Opt-in Guaranteed Overtime - after your first month, you can choose to work extra rest days at £30 per hour. Just one extra day a month could earn you £3,000 more per year on top of your base salary. Two extra days could give you an extra £5,000. It's your choice - more flexibility, more reward., • Tools to Drive Your Future - get started with a free RAC Ultimate Complete Breakdown Service from day one, plus access to a car salary sacrifice scheme (including electric vehicle options) after 12 months, delivering serious tax savings., • Time Off That Matters - enjoy 23 days of holiday (rising to 25 with service), plus bank holidays. We also support work-life balance with paid family leave, flexible schedules, and practical resources to help navigate personal commitments., • Financial Security & Perks - pension scheme with up to 6.5% matched contributions alongside life assurance cover up to 4x salary (10x optional with flex benefits), designed to support you long-term., • Wellbeing That Works for You - our 24/7 confidential support service is available to you and household members aged 16+, offering reassurance whenever you need it., • Extras That Make a Difference - access Orange Savings, our exclusive discount portal with deals across top retailers, holidays, tools, tech and more. After passing probation, you’ll automatically join our Colleague Share Scheme, giving you a stake in our collective success. Who thrives here? You’re more than just great with tools - you’re great with people. Our Mobile Mechanics are the face of the RAC: working on driveways, in car parks, speaking directly with members, and providing reassurance, clarity and high-quality service. You enjoy independence, problem solving and real variety - each job is different. From servicing and diagnostics to in depth repairs and reporting, you’re hands-on, adaptable and confident making decisions on the spot. You take pride in using your technical ability to genuinely help people and keep them moving. The role is ideal if you want: ✔Independence in a mobile role ✔The stability and support of a trusted national organisation ✔Ongoing development, including future EV and diagnostic skills ✔A role where giving members complete peace of mind is simply part of what you do We’re the RAC At the RAC, we don’t stand still. With over 125 years of history and 12.5 million members, we’re on a mission to become the UK’s number one motoring services provider. Our culture reflects that ambition – backed by a 4.5-star Glassdoor rating, our people know we’re serious about career growth, recognition, and support. We celebrate individuality and champion every voice. As an equal opportunities' employer, we welcome people from all backgrounds and walks of life – it’s what sets us apart and drives us forward.

Contract Development Engineer Location: Peterborough (Fully Onsite) Hourly Rate: £42.77 per hour Equivalent Day Rate: £320.78 per day (Based on a 37.5-hour week) Duration: 12 Months (Strong likelihood of extension) Working Hours: 37.5 hours per week (Flexible start/finish times: Mon-Thu 8:30-16:45, Fri 8:30-16:15) We are seeking a skilled and collaborative Development Engineer to join a close-knit, high-performing team of 10 engineering specialists in Peterborough. This is a high-impact, 12-month contract role where you will balance cutting-edge New Product Introduction (NPI) projects with vital current product optimization. If you are looking for a hands-on technical challenge where your work directly shapes engine performance, component lifespan, and green energy readiness, this is the contract for you. The Opportunity: What You Will Do Split across two vital workstreams, you will have a direct impact on both new developments and sustaining engineering: • New Product Introduction (NPI): Help take a relatively new, clean-sheet engine platform to the next level. You will focus on stretching engine power output, advancing component revisions, and validating new parts as projects move from design into the development phase., • Current Product S...

My client is starting a brand new commercial project in Peterborough and is now looking for TWO Pipe Fitters and Mates, for around 4 months work. HOURLY RATE : £25.50 per hour - Fitter £20.00 per hour - Mate CIS payments only LOCATION : Peterborough, PE7 DATE COMMENCING : Monday 22nd June 2026 LENGTH OF CONTRACT : 3-4 months HOURS OF WORK : · 7:30am - 16:30pm · Book 9 hours per day JOB DESCRIPTION : Pipe Fitter & Mate My client is looking for TWO experienced Pipe Fitters and Mates, to work as two pairs on site in Peterborough. IPAF and CSCS Skills cards are a must and you must be able to provide your own tools and PPE. REQUIREMENTS : Pipe Fitter & Mate · CSCS card Skills · PPE · Tools · Commercial experience PERSON SPECIFICATION : Pipe Fitter & Mate · Can communicate well and work with others already on site. · Can read a drawing and follow instructions given · Can work the 42.5 hours each week Please Note : You will be paid via our payroll partner Marvel Payroll, and one of their Account Managers will contact you before you start work. All workers will be paid by CIS. Wallace Hind Selection - Construction Temps, alongside our client...

My client is starting a brand new commercial project in Peterborough and is now looking for TWO Pipe Fitters and Mates, for around 4 months work. HOURLY RATE : £25.50 per hour - Fitter £20.00 per hour - Mate CIS payments only LOCATION : Peterborough, PE7 DATE COMMENCING : Monday 22nd June 2026 LENGTH OF CONTRACT : 3-4 months HOURS OF WORK : · 7:30am - 16:30pm · Book 9 hours per day JOB DESCRIPTION : Pipe Fitter & Mate My client is looking for TWO experienced Pipe Fitters and Mates, to work as two pairs on site in Peterborough. IPAF and CSCS Skills cards are a must and you must be able to provide your own tools and PPE. REQUIREMENTS : Pipe Fitter & Mate · CSCS card Skills · PPE · Tools · Commercial experience PERSON SPECIFICATION : Pipe Fitter & Mate · Can communicate well and work with others already on site. · Can read a drawing and follow instructions given · Can work the 42.5 hours each week Please Note : You will be paid via our payroll partner Marvel Payroll, and one of their Account Managers will contact you before you start work. All workers will be paid by CIS...

Mechanical Design Engineer 6 Month Contract, Outside IR35 Plymouth (Hybrid/Remote) Up to £50.00 per hour DOE (Limited Company) + Hybrid/Remote Working + Early Finish on Friday Excellent opportunity for a Mechanical Design Engineer for an immediately available contract role working for a market-leading, international company. The company are a well-established, highly revered manufacturing company in the Plymouth area with sites across the world that not only are renowned for the quality of their products but also for being a leading and progressive employer within the area. Due to growth, they are currently looking for a Design Engineer on a contract basis. In this role you will work directly with customers to establish their requirements and manage the design process on multiple projects The person will come from a Quality Engineering background and have knowledge of a variety of processes within a manufacturing/engineering environment. The Role: • Liaising directly with clients, creating designs from scratch, the use of design tools such as DFMEA and Six Sigma., • Core hours - Monday to Thursday, 08:00 - 16:30, Friday 08:00 - 15:30, • 6 month contract, outside IR35 (Limited Company) Hybrid working available - normally 1 day a week on site or 1 week a month if further afield The Person: • Experience with 3D design software (Creo/Windchill/Autodesk Inventor and/or Vault software, • Experience within sheet metal design, • Mechanical Engineering degree, • Available for an immediate start Reference Number: BBBH254257 To apply for this role or for to be considered for further roles, please click "Apply Now" or contact Sophie Fox at Rise Technical Recruitment. This vacancy is being advertised by Rise Technical Recruitment Ltd. The services of Rise Technical Recruitment Ltd are that of an Employment Agency. Rise Technical Recruitment Ltd regrets to inform that our client can only accept applications from engineering candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending

Pertemps are recruiting HGV Class 1 (C+E) Night Drivers for a well-known and established haulier based in Newark. We can offer full or part time night work with shifts available throughout the week, all year round. All work is fridge work, completing straightforward deliveries and collections to large distributions centres and warehouses in the region. What We Offer Night shifts starting between 16:00 – 18:00 Work available Monday to Sunday Full / part-time shifts throughout the week Modern, well-maintained fleet Refrigerated trailer work Pay Rates (all PAYE) £16.00 per hour (Monday to Friday) £19.00 per hour (Weekend rate) Requirements Valid HGV Class 1 (C+E) licence held for at least 12 months Valid CPC and Digital Tachograph cards Maximum 6 penalty points (No DR10, CD10, IN10) Reliable and flexible approach to ad hoc shifts Ideal For Drivers Based In: Newark, Lincoln, Grantham, Mansfield, Retford, Southwell and surrounding areas. Suitable For: C+E Drivers, Class 1 Drivers, HGV Drivers, LGV Drivers, Night Drivers, Fridge Drivers. Apply Now Click Apply Now or contact Joe at Pertemps Lincoln on (phone number removed) for more information...

Pay: From £13.00 per hour Job Description: Wood Assembly Operatives Immediate Start Location: Sutton on Trent Pay Rate: £13.00 per hour Contract: Ongoing Start Date: ASAP Hours: Monday to Friday, 07:00 16:00 Overview CDS Labour are recruiting Wood Assembly Operatives to join a busy manufacturing site in the Sutton on Trent area. This is a hands-on role working in a fast-paced environment, ideal for candidates with assembly, production, or warehouse experience. Key Responsibilities • Assembling wooden products using hand tools and nail guns, • Operating power tools and basic machinery, • Carrying out quality checks on finished products, • Handling materials and assisting with heavy lifting, • Maintaining a clean and safe working environment, • Following all health & safety procedures Requirements • Previo...

Contract Development Engineer Location: Peterborough (Fully Onsite) Hourly Rate: £42.77 per hour Equivalent Day Rate: £320.78 per day (Based on a 37.5-hour week) Duration: 12 Months (Strong likelihood of extension) Working Hours: 37.5 hours per week (Flexible start/finish times: Mon-Thu 8:30-16:45, Fri 8:30-16:15) We are seeking a skilled and collaborative Development Engineer to join a close-knit, high-performing team of 10 engineering specialists in Peterborough. This is a high-impact, 12-month contract role where you will balance cutting-edge New Product Introduction (NPI) projects with vital current product optimization. If you are looking for a hands-on technical challenge where your work directly shapes engine performance, component lifespan, and green energy readiness, this is the contract for you. The Opportunity: What You Will Do Split across two vital workstreams, you will have a direct impact on both new developments and sustaining engineering: • New Product Introduction (NPI): Help take a relatively new, clean-sheet engine platform to the next level. You will focus on stretching engine power output, advancing component revisions, and validating new parts as projects move from design into the development phase., • Current Produ...

Class 1 Driver Based:NG22 - NEWARKUp to £21.00 Were currently recruiting for experiencedClass 1 Driverto work with awell-established company based in Newark, Nottinghamshire.This is a great opportunity for ongoing, and potentially full-time work. As aClass 1 Driver, youll be responsible for: Fridge/Tipper Vehicles Ensuring all paperwork and delivery notes are completed accurately Maintaining professional standards and excellent customer service at all times High standard of safe system of work Hours & Pay: Start Times/Days can vary! - This role can involve nights out / tramping depending on the run. Shift Length:8-12 hours per day Pay Rates: £16-21 per hour Weekly pay every Friday Requirements: ValidClass 1 (Category C+E)licence ValidCPC & Digital Tachograph Card Experience withcurtain-side trailerspreferred Excellent communication and customer service skills Apply Now to become a HiredGiant!-TEMP TO PERM! Class 1 Driver • HGV 1 Driver, • LGV C+E, • Fridge Trailer, • Curtain Side, • Trunking, • HGV Jobs, • Newark, • Lincoln, • Class 1 Newark, • Fridge, • Tipper, • Tipper Driver, • newark, • C+E Tipper, • C+E Fridge, • HGV Fridge Driver, • Class 1 Day Driver, • Logistics & Transport Jobs, • Full Time HGV Work JBRP1_UKTJ

Take on a contract role with weekly pay and steady work as a Gas Engineer, supporting kitchen refurbishment works across domestic properties in Newark and Sherwood. This is a hands-on role working in occupied and void homes, completing safe gas isolations, first and second fix works, safety checks, and associated wet plumbing tasks. Youll be joining a reliable property services contractor delivering planned kitchen refurbishments across local housing stock. This role would suit a Gas Engineer who is confident working to programme deadlines, completing compliant work, and supporting wider refurbishment teams on site. Id love to see CVs from anyone who has worked as a Gas Engineer, Gas Safe Plumber, Heating Engineer, Domestic Gas Engineer, or Plumbing and Heating Engineer within social housing, planned works, or domestic refurbishment settings. As a Gas Engineer, you will be: • Isolating gas supplies safely during kitchen rip-outs, • Completing first fix plumbing work linked to kitchen refurbishments, • Identifying and locating pipework and services for sinks and appliances, • Carrying out second fix gas works, including appliance reconnection or installation where required, • Completing Gas Safe checks after rip-out and again at completion, • Removing existing radiators as required, • Refitting and installing new radiators across the planned programme, • Working safely and compliantly across occupied and void domestic properties Id love to speak to anyone who has: • Gas Safe registration, • Relevant domestic ACS qualifications, • Experience with gas isolations, testing, and first/second fix works, • Strong wet plumbing experience, including radiator removal and refitting, • Experience working in domestic housing, social housing, or planned refurbishment works, • The ability to work to programme deadlines across multiple properties The role is offering the following benefits: • Weekly pay, • £24-26 pounds per hour, • Consistent contract work, • Local work across Newark and Sherwood, • Ongoing kitchen refurbishment programme, • This role is offering pay in the region of £16 to £19 per hour, depending on experience and expectations. Location & travel This Gas Engineer role is based across Newark and Sherwood, supporting a local housing contract with works carried out across domestic properties. Youll be working as part of a planned kitchen refurbishment programme, moving between properties as required to complete gas and plumbing tasks at key stages of the works. If this Gas Engineer role sounds like something youd be interested in, apply now or contact Paris on or 07451262464 to find out more. JBRP1_UKTJ

ARC are recruiting on behalf of our market leading client, looking for HGV Class 1 night drivers to work within their organisation CLIENT LOCATION - Peterborough Job Title: HGV Class 1 Driver Job Type: Temporary - ongoing. Location: PE1 Rate of pay: PAYE AUTO £16ph, Hybrid £17.20ph, Ltd £21ph Are you an experienced HGV Class 1 driver looking for an exciting opportunity? Look no further! ARC, one of East Anglia's leading Recruitment Agencies, is seeking skilled drivers like you to join their client's dynamic team. With immediate starts available once registered, you can jump-start your career right away. ARC are currently looking for HGV Class 1 Night Driver to work with a well established refridgerated haulage distributor. For this position, you must have the following: 6 months class 1 driving experience in the uk needed. Qualifications - C+E license, digi card and CPC. Updated driver cards. No more than 9 points. This driving position is for an ongoing duration, with the potential for it to be temp-perm for the right candidate. The type of work for this HGV Class 1 night position will be refrigerated haulage. You will be expected to do hub runs around the country. It will include standard delivery paperwork. This HGV Class 1 position will be Monday-Friday with minimum 8 hours paid each day. BENEFITS OF WORKING FOR ARC • Working with one of East Anglia’s leading Recruitment agencies with 16 years within the marketplace, recruiting for many of the region’s leading companies. • In a recent survey 96% of our clients stated ARC are their preferred agency labour supplier. • Paid annual leave pro-rata for PAYE (inclusive of statutory holiday) • Weekly pay – with a 1 hour pay resolution guarantee. • Pension contribution (after 3 months continuous service). • On-going assignments • Free access to our Health Assured scheme for you and your family. • Access to Free online training. Don't miss out on this fantastic opportunity to join ARC and drive your career to new heights! Apply now by visiting our website at . Take the first step towards a rewarding future as an HGV driver! THERE ARE AGENCIES THEN THERE IS ARC DRIVING STANDARDS FORWARD

We are looking for an experienced 360 Machine Operator to work on a busy housing site in Peterborough for one of our clients. HOURLY RATE : £24.00 per hour - CIS LOCATION : Peterborough DATE COMMENCING : Friday 26th June 2026 LENGTH OF CONTRACT : Ongoing HOURS OF WORK : · 7:30 - 16:30 · Book 9 hours per day REQUIREMENTS : 360 Machine Operator · CPCS / NPORS above 10 ton · PPE · Experienced 21ton operator PERSON SPECIFICATION : 360 Machine Operator · Can communicate well with others already on site, and follow instructions given · Previous housing experience · Good work ethic · Can work the full 45 hours are required per week Please Note : You will be paid via our payroll partner Marvel Payroll, and one of their Account Managers will contact you before you start work. All workers will be paid by CIS. Wallace Hind Selection - Construction Temps, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Ref: Tommy Smith - 18532, Wallace Hind - Construction Temps

Job Title: Labourer (CSCS) Start Date: 07/07/2026 Pay: £16.75p/hour CIS Location: Peterborough Hours: 08:00am – 16:30pm Duration: 5 months Job Description: As a general labourer you will be in charge of keeping the site tidy, this would include sweeping, moving materials ect. You may also be required to move materials and assist with trades

Date posted: 16 June 2026 Pay: £12.85 per hour Job Description: Packer Job Title: Packer Location: Peterborough Job Responsibilities In the role of Packer, you will be: Packing items into boxes Building cartons for the products Working within a chilled environment Working in a cold environment at 5 degree temperature throughout the dayHours of Work and Pay £12.85 per hour Monday to Friday 06:00 to 14:00 Overtime x1.25

Job Role: Field Service Engineer – Freight Wagon Maintenance Salary: £52k Location: Midlands and South based Shift Pattern: 4 days on (12 hour shifts) followed by 4 x 24 hours on call, 4 days off About the Client Our client is a global leader in rail technology, freight solutions, and rolling stock engineering, supporting operators and manufacturers across the UK and worldwide. With a long heritage in rail innovation, they specialise in locomotive and wagon maintenance, digital rail systems, braking technology, and fleet modernisation programmes. They play a major role in keeping freight and passenger services moving, delivering high‑quality engineering support, component overhaul, and reliability‑focused upgrades. Their teams work across depots, customer sites, and major rail facilities, providing technical expertise that helps improve safety, performance, and operational efficiency across the network. This is an opportunity to join a respected organisation known for its engineering excellence, strong safety culture, and commitment to continuous improvement. About the Role We’re looking for an experienced and safety‑focused On‑Call Fitter to join a growing freight maintenance team supporting wagon fleets across the UK. This is a field‑based role working on a 12‑day rotating shift pattern (4 × 12‑hour shifts, 4 × 24‑hour on‑call, 4 days off), providing essential maintenance, fault diagnosis, and responsive repair services. If you enjoy working independently, solving problems on the ground, and keeping freight operations moving, this is a fantastic opportunity to join a team delivering high‑quality engineering support across the network. What You’ll Be Doing Working to all Health & Safety legislation and company procedures. Carrying out dynamic risk assessments and maintaining safe systems of work. Using PPE correctly and following site‑specific safety rules. Reporting hazards and supporting incident investigations. Delivering maintenance, inspections, and repairs to industry and customer standards. Completing accurate documentation, inspection sheets, and fault reports. Supporting continuous improvement and defect trend analysis. Attending urgent call‑outs for wagon faults, brake issues, and derailments (any time, 7 days a week). Providing technical support during on‑call periods (9am–3pm where required). Working with terminal staff and operators to minimise disruption. Maintaining vehicle, tools, and equipment readiness. Supporting project work, commissioning, and modification programmes. Participating in 5S and lean initiatives at depots and customer sites. What We’re Looking For Essential NVQ Level 3 (or equivalent) in Mechanical or Electrical Engineering. Experience in freight wagon maintenance or similar heavy engineering. Strong fault‑finding and repair skills. Ability to work independently and make safe decisions on site. Good communication and basic IT skills. Full UK driving licence. Willingness to work unsociable hours and travel. Desirable Knowledge of brake systems, couplers, and running gear. Experience in rail freight operations. PTS or equivalent site access certification. HNC/HND or NVQ Level 4. What You’ll Receive Full training programme (12–16 weeks) before joining the on‑call rota. All tools, equipment, PPE, and vehicle provided. Supportive team environment with ongoing development. Opportunity to work on varied sites across the UK rail network

Team Leader – Production (Food Manufacturing) Peterborough £13.50 per hour Permanent Position Monday to Thursday | 06:00 – 16:30 Our client, a growing and successful manufacturing business in Peterborough, is seeking an experienced Production Team Leader to join their expanding production department. Key Responsibilities • Lead and motivate a production team to achieve daily targets., • Ensure production runs efficiently while maintaining quality standards., • Monitor and improve productivity, safety, and performance., • Support training and development of production operatives., • Ensure compliance with food safety and health & safety procedures. Requirements • Previous experience in a Team Leader (TL) or Line Leader (LL) role within a food manufacturing environment., • Strong leadership and communication skills., • Ability to work in a fast-paced production setting., • Good understanding of production processes and quality standards. Desirable Skills • Experience operating Vertical Form Fill Seal (VFFS) machinery., • Food manufacturing engineering background., • Experience as a VFFS Machine Operator within a manufacturing environment (food or non-food). What's on Offer? Permanent, full-time position Four-day working week (Monday to Thursday) Opportunity to join a growing and supportive business Career development opportunities If you have production leadership experience and are looking for your next challenge in Peterborough, we'd love to hear from you. Apply today or contact our recruitment team for more information

Production Planning Assistant - Eye - £30-35k (DOE) We are currently seeking a Production Planning Assistant to support production scheduling across our clients manufacturing areas. This role plays a key part in ensuring customer orders are delivered on time while maintaining optimal production flow and inventory levels. Salary: £30-35k Hours: Monday - Friday 07:30am-16:30pm (40 hour week) Holiday: 25 days + Bank Holidays Key Responsibilities: Maintain and update production schedules in line with machine, material and labour capacity. Create and manage Works Orders within the ERP system. Coordinate with internal teams including Production, Purchasing, and Sales teams to align demand and material availability. Monitor and maintain Finished Goods and WIP stock levels. Communicate potential delays and scheduling risks proactively. Cover for Purchasing and Planning team members during annual leave. Participate in daily and weekly planning meetings. What We're Looking For: Basic understanding of manufacturing. Strong Excel and I.T system skills. Highly organised with strong attention to detail. Strong communicator who works well across teams. Eager to learn and grow within Supply Chain / Manufacturing.This is an excellent opportunity for a motivated individual looking to develop their career in production planning within a dynamic manufacturing environment. If you are interested in this role, or know of someone that may be interested, please respond to this with a copy of an up to date CV for more information. Alternatively you can reach us on (phone number removed)! Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website

Injection Mould Setter – Nights £18.12 per hour + £50 Weekly Attendance Allowance Monday to Thursday | 18:00 – 06:00 | Permanent Four-Day Working Week – Enjoy a Three-Day Weekend Every Week Profile 5S Recruitment are delighted to be supporting a well-established and highly successful manufacturing business in the recruitment of an experienced Injection Mould Setter for their night shift operation. This Injection Mould Setter opportunity offers the chance to join a busy, modern manufacturing environment where your experience will be valued, your ideas listened to, and your contribution recognised. Working just four nights per week, this position provides an excellent work-life balance, giving you every Friday, Saturday and Sunday off to spend with family, pursue hobbies or simply recharge. If you are an experienced Injection Mould Setter who enjoys keeping production running efficiently, solving technical problems and taking ownership of machine performance, this could be the ideal next step in your career. The Role As an Injection Mould Setter, you will play a key role in ensuring production runs efficiently, safely and to the highest quality standards. Responsibilities include: • Setting, adjusting and optimising injection moulding machines to maximise efficiency and output., • Carrying out safe and efficient tool changes in line with production schedules., • Monitoring machine performance, cycle times and product quality., • Diagnosing and resolving process and machine issues to minimise downtime., • Calibrating masterbatch units in accordance with setting sheets and production requirements., • Maintaining high standards of housekeeping, safety and quality throughout the production area., • Recording downtime, scrap and production data accurately using the company's ERP system., • Providing supervisory cover during holidays and periods of absence when required., • Working closely with operators, supervisors and management to achieve production targets. The Candidate To be successful in this Injection Mould Setter position you will ideally have: • Previous experience working as an Injection Mould Setter within a plastic injection moulding environment., • Strong tool changing and machine setting experience., • Good process optimisation and fault-finding skills., • Experience monitoring cycle times, quality standards and reducing rejects., • Knowledge of masterbatch calibration and processing adjustments., • Good computer literacy and experience using production or ERP systems., • Strong communication and teamwork skills., • A proactive, organised and methodical approach., • Excellent problem-solving abilities and attention to detail., • A good understanding of Health & Safety within manufacturing. What's on Offer • £18.12 per hour., • £50 weekly attendance allowance., • Weekly pay., • Permanent night shift., • Monday to Thursday working pattern., • Every Friday, Saturday and Sunday off – enjoy a genuine three-day weekend every single week., • Better work-life balance with a consistent four-day working week., • Free onsite parking., • Employee benefits platform with high street discounts and cashback., • Ongoing training and development., • Friendly, supportive manufacturing team. This Injection Mould Setter position offers far more than just a competitive salary. It provides the opportunity to work a highly desirable four-day week, giving you more time to enjoy your weekends while building a long-term career with a stable manufacturing business. If you're an experienced Injection Mould Setter looking for a new permanent opportunity where your skills will be valued and your weekends are protected, we'd love to hear from you. About 5S Recruitment Limited 5S Recruitment Limited are specialist recruiters within the plastics, engineering and manufacturing sectors. With over 16 years of industry experience, we believe in quality over quantity, taking the time to understand both our clients and candidates to ensure the right long-term fit. As a one-man-band recruitment business, every candidate receives a personal, honest and professional service throughout the recruitment process

Choose the hours that suit your lifestyle with financial security through a. You can choose the hours you are contracted to.

The Role Security and Parking Officer - Royal Stoke University Hospital – Flexible Zero Hour Contract - 12. Per Hour Do you have an SIA license? Do you enjoy working outside? Are you a security focused person? Are you looking for flexible shifts to suit your other commitments? If you answered yes

Choose the hours that suit your lifestyle, with financial security through a.

A private employer is seeking a Personal Assistant (PA) in Gosforth, Newcastle upon Tyne.The role involves assisting a 17-year-old with a learning disability who requires support in daily activities, such as personal care, domestic tasks, and social engagement.The ideal candidate should have experie

LOCUM ECP ANP CHERTSEY HOURS DAYS TO SUIT £38 £55 per hour in Surrey Job Ref: dmarche1 Dream Medical is a specialist in Primary Care Recruitment that works in partnership with prestigious private and third sector clients. The role offers a range of hours from part‑time to full‑time, with 24/7

We are looking for a caring, patient Female Personal Assistant in Fenham, Newcastle upon Tyne to support a 7-year-old girl with complex needs.The position involves ensuring her safety, assisting with daily care activities, and providing enriching community experiences.The role requires sensitivity t

Locum GP required in Uxbridge | 36 hours per week | £75 per hour in London North. Locum GP required in Sheffield | 36 hours per week | £85 per hour. Locum General Practitioner | North London | £80 per hour.

Looking for a Female Personal Assistant in Fenham, Newcastle Upon Tyne.The role involves supporting Shannon, a 12-year-old girl with autism, to enjoy community activities and develop independence.Candidates need to be friendly, reliable, and must hold a full UK driving licence.Shannon loves active p

Tripod are the fastest growing specialist health and social work Recruitment Company in the UK.Our team includes some of the most experienced consultants in the country who have the knowledge and skills to find you the best opportunities and further your career.We aim to make things as simple as pos

Locum GP required Harrogate £80 per hour 37 Hours p w in North Yorkshire. Locum GP required in Harrogate | 37 hours per week | £80 per hour. The hourly rate for this position is £80.

The shift pattern:Full Time Rota: Week 1 (5 days): Monday, Tuesday, Friday, Saturday, Sunday Week 2 (2 days): Wednesday, Thursday Shift available:10am-10pm (12 hours) Rate of Pay:£13.

The job offers a flexible schedule of 4 hours per week during term time and 11.

The role involves providing obstetric and gynecologic services with 24-hour in-house call coverage for 2-4 days at a time.

Village location, YO51 postcode, easily accessible from A1.Caring for a young lady with learning disabilities.Experience in providing support for young adults with additional needs.Female applicants only as some help with personal care needed.The job is caring for a lovely, sociable, young lady with

Locum GP required in Sheffield | 36 hours per week | £85 per hour. Excellent hourly rate of £80 per hour on offer – immediate start available. LOCUM GP HEMEL HEMPSTEAD LONG TERM ROTA c£80 per hour in Hertfordshire.

This role involves caring for a lovely, sociable young lady with learning disabilities at home.The position requires working two overnight shifts weekly, from 3.Tuesdays and Thursdays, offering £16.A genuine occupational requirement for the holder of this role to be female is in accordance with the

LOCUM GP SE LONDON UCC FLEXI DAYS HOURS £85. The hourly rate on offer for this position is at the very top end of the scale in the UK at the moment to reflect the flexibility you as a GP will have to have. Hours: Monday–Friday, 8:00–17:00.

Here at Tortilla, we are seeking to recruit a.Central Kitchen in Tottenham Hale.You will join us on a permanent and full-time basis, and in return, you will receive a competitive rate of.Benefits we can offer you as our Kitchen Assistant.Free homecooked lunch during shifts.Epic social events and ent

Balham, UK – £75 per hour (37‑40 hours per week). Working 37‑40 hour week, you will see a diverse range of patients at the site we manage and perform the normal duties a regular NHS Locum GP does. Cover an ongoing rota (Monday‑Friday weekly) with no weekend work or extended hours required.

We are recruiting experienced Duct Fitters and Duct Mates for an exciting commercial project based in Derby.Weeks+ (potential for extension) |.Monday to Friday 07:30 - 16:00.Installation of Galvanized ductwork.Duct Installation qualification listed on the back of the card.Proven experience installin

Join our caring team as a Personal Assistant in Gosforth, Newcastle.You'll support two wonderful young individuals with autism and learning disabilities, enabling them to grow in confidence and independence.This role offers flexible part-time and full-time shifts, providing a genuinely rewarding exp

Locum GP required in Sheffield | 36 hours per week | £85 per hour Dream Medical, in conjunction with an esteemed client is seeking a locum GP who can commit to 9 sessions a week. Per Hour PLUS Travel Accomodation in Bath and North East Somerset. You will not be expected to cover any extended hours

A personal assistant is needed to support a child with complex medical needs in Gosforth, Newcastle upon Tyne.Responsibilities include providing personal care, assisting with daily living activities, and engaging in community outings.Applicants must have experience with Epilepsy and Disabilities, a

The hourly rate on offer for this position is at the very top end of the scale in the UK to reflect the flexibility you as a GP will have. LOCUM GP KENT UCC FLEXI DAYS HOURS £85.

This role involves working 40+ hours per week with a structured job plan available upon request.