Product lead jobs in PeterboroughCreate job alerts

Lifecycle Consultant - Aftermarket Location: Peterborough (100% Onsite) Pay Rate: Up to £44.04 per hour (Umbrella) Duration: 12-Month Initial Contract (Likely to extend) Working Hours: Monday - Friday, 8:00 am - 4:00 pm The Opportunity We are looking for a Lifecycle Consultant to join our Industrial Power Systems Division in Peterborough. This is a pivotal role focused on driving initiatives that support parts and service growth through the entire product lifecycle. You will work within a team of consultants and engineers, playing a key role in protecting and improving our aftermarket legacy with a heavy focus on the New Product Introduction (NPI) phase. This is a diverse, high-impact position where you will be involved across the business and multiple functions, providing a unique opportunity to support exciting new product launches. Your Role As the successful candidate, you will bridge the gap between engineering design and commercial growth. You will lead aftermarket deliverables within large-scale projects to ensure we meet budget and strategy goals while developing new repair options that drive global parts sales. Key Responsibilities: • NPI Leadership: Lead aftermarket deliverables within NPI or product deletion projects, managing tasks to be on time and within budget., • Drive Revenue: Implement and improve solutions using key metrics to drive parts revenue and Percentage of Parts Sales (POPS) growth., • Lifecycle Management: Optimize parts branding, intellectual property, and supplier agreements throughout the product lifecycle., • Technical Influence: Work with Engine Design and Product teams to ensure that product design reflects specific aftermarket requirements. We need a technical project specialist who can lead by influence and analyze complex data sets to provide clear direction. Requirements: • Experience: Minimum of 5 years in the automotive, off-highway, or a similar technical product industry., • Technical Knowledge: Extensive understanding of NPI, product deletion, design change, and service/repair/overhaul solutions., • Systems: Proficiency in reading engineering drawings using Teamcenter or equivalent engineering data management systems., • Hard Skills: Strong project management skills and a solid technical awareness of diesel engines and parts. This role offers the chance to be part of a high-performing team of six within a broader lifecycle and commercial group. You will have the opportunity to directly impact the success of new product launches while working in a collaborative, professional environment. Ready to drive aftermarket excellence? Apply today.

Our client, a well-established business based on the outskirts of Peterborough, is looking to recruit a Data Analyst/Manager to join their team on a permanent basis. PETERBOROUGH CAMBS, OFFICE BASED £35000 - £40000 Monday to Friday 09.00am to 17.00pm About the company My client is an innovative and forward-thinking brand where creativity and impact go hand in hand. They are passionate about breaking the mould—whether through the content they create, how they engage and inspire audiences, or the way they deliver their work. At their core is a strong commitment to investing in people and projects that drive meaningful, measurable outcomes. They partner with a diverse portfolio of clients, all united by a shared ambition to create positive change and sustainable growth. Key responsibilities for the Data Analyst/Manager role: As a Data Analyst/Manager, this is a senior, hands-on role where you will oversee data systems, reporting, and insights that directly influence company performance across our partner organisations. You will play a key role in shaping how data is captured, analysed, and used—both internally and for clients—ensuring our platforms deliver actionable insights and measurable impact. Data Strategy & Ownership • Lead the development of the data strategy across products and platforms, • Act as the senior data lead, supporting leadership with insight-driven decision making, • Own data architecture across CRM systems, internal platforms, and reporting tools, • Ensure high standards of data quality, integrity, and compliance (including GDPR), • Deliver analysis on campaign performance, player behaviour, and outcomes, • Build dashboards and reports for internal teams and external partners, • Support client-facing reporting, demonstrating ROI and impact of solutions, • Work closely with account management and marketing teams to optimise campaigns, • Manage and optimise CRM and database systems (e.g., supporter databases, platforms), • Lead on implementation of BI tools, • Act as the go-to expert for data across the business, • Support and mentor junior analysts as the team grows We are looking for a Data Analyst/Manager who has the following: • Proven experience in a senior data role (Data Manager, Senior Analyst, or similar), • Strong understanding of data in a commercial or environment, • Advanced skills in SQL, Excel, and data visualisation tools, • Experience working with CRM systems and customer / supporter data, • Knowledge of GDPR and data governance best practices Coulter Elite Resourcing is an independent recruitment consultancy acting on behalf of our client. Our areas of recruitment include Commercial, FMCG, Engineering, Technical, and IT. We aim to respond to every application we receive. However, due to the volume of applications, this isn’t always possible. If you have not heard from us within 5 working days, please accept our apologies that your application has been unsuccessful on this occasion.

PE Global is recruiting a Design Engineer for our manufacturing client based in Peterborough, the role is an initial 12 month contract and the rate for this role is £35.30 PAYE or £47.91 Umbrella p/hour. Responsibilities: • Design, Plan and deliver air/fuel system/component development projects to time, cost and quality goals., • Communicate design and project status and key issues to peers, stakeholders and management., • Lead design reviews to gain cross-functional business support for new designs, supplier nomination and capital investment., • Collaborate with suppliers to develop specifications and deliver quality solutions through APQP., • Assess technical risk through FMEA; define and coordinate simulation and validation activities (DVP&R)., • Investigate and resolve technical issues using 8D methodology., • Collaborate with Product Management to understand customer needs and design requirements., • Write and review technical information and technical reports to support production design release., • Collaborate with global teams to implement engineering solutions at worldwide facilities., • Reflect on lessons learnt, using Lean methodology to identify improvement opportunities. Qualifications: Essential: • Bachelor’s degree in an accredited Engineering or related discipline (or equivalent knowledge/experience)., • 6-8 years of engineering or relevant experience., • Good understanding of mechanical engineering fundamentals, engine components and/or systems and component development., • Highly level of expertise working in CAD and PLM systems :, • Experience of using CAD (Creo) to design powertrain components, • Experience of using PLM systems (Teamcenter), • Experience designing powertrain and/or engine components., • Regularly supporting peer reviews working with others to share learning and develop robust solutions., • Use of research techniques to identify solutions to problems autonomously., • Good understanding of manufacturing principles and processes., • Self-motivated and able to manage and deliver complex projects to meet commitments., • Effective communication skills and teamwork. Desirable: • Expertise in high or low pressure fuel systems., • Air system, EGR system, turbochargers would also be considered., • Experience of leading and participating in APQP, FMEA and DVP&R., • Engineering experience gained in the off-highway diesel engine sector., • Analytical skills, and experience of developing components and systems through simulation, rig testing and complete system testing. Please note PE Global cannot assist with visa sponsorship, candidates will need the full right to live and work within the UK for at least the next 12 months.

PE Global is recruiting a Product Life Cycle Consultant (Aftermarket) for our manufacturing client based in Peterborough. The role is an initial 12 month contract and the rate for this role is £33.12 PAYE or £44.95 Umbrella p/hour. Key Responsibilities: • Lead aftermarket activities across NPI and product lifecycle projects, • Drive initiatives to improve parts sales and aftermarket growth, • Develop and implement repair and service solutions, • Support business cases for new aftermarket products and services, • Optimise parts branding, supplier agreements, and design changes, • Collaborate with engineering and product teams to embed aftermarket requirements, • Analyse complex data to support decision-making and continuous improvement, • Ensure parts availability and service levels are aligned with growth targets Requirements: • Minimum 5 years’ experience in automotive, off-highway, or similar technical industries, • Strong project management skills, • Knowledge of aftermarket operations and business cases, • Technical understanding of diesel engines and components, • Experience with engineering data systems (e.g. Teamcenter or similar), • Proficient in Microsoft Excel and MS Office, • Ability to read and interpret engineering drawings Desirable: • Degree qualification or equivalent experience, • Knowledge of parts marketing and sales, • Experience across NPI and product lifecycle processes Please note PE Global cannot provide visa sponsorship. Candidates will need the full right to live and work within the UK for at least the next 12 months.

Branch Manager Location: Peterborough Salary: Up to £45,000 (negotiable for the right candidate) + Annual Bonus Industry: Metals Reference: PETBRM-DB We’re recruiting a Branch Manager to lead the day to day operations of a well-established metal stockholder and processor in Peterborough. This is an excellent opportunity for an experienced manager with a sales mindset, ideally from a metals or related industrial background, to take ownership of a busy branch, drive sales performance, and manage a team effectively. Key Responsibilities: • Lead the branch team, including Sales, Admin and Warehouse., • Ensure daily operations run smoothly, including on time deliveries and high quality service, • Support the sales team while running your own accounts, • Analyse customer base and branch performance to drive revenue and margin, • Contribute to purchasing decisions and stock management, • Ensure compliance with Health & Safety regulations, • Conduct monthly management meetings and review branch KPIs, • Analyse data to identify opportunities for growth and operational efficiency Key Requirements: • Proven management experience, ideally in sales or branch operations, • Strong leadership and people skills, approachable, fair, and decisive, • Forward thinking, proactive, and hands on, • Track record of meeting or exceeding sales targets, • Experience within metals, manufacturing, engineering, or multi-product sectors preferred, • Background in internal sales or branch management advantageous Package & Benefits: • Competitive salary up to £45,000, negotiable for the right candidate, • Annual bonus based on branch performance, • Monday–Friday: 08:30–17:15 (flexi-time), • 25 days holiday + Bank Holidays, • Company pension scheme, • Opportunity to lead a market leading business within the metals industry To Contact Direct Daniel Barnett Senior Executive Consultant 0151 209 2050 At Aspion, our core values have been built around the importance of transparency, innovation, passion and collaboration. As such, we are committed to open communication and the protection of your privacy. We have updated our policies in line with new General Data Protection Regulation laws to make it easier for you to understand how we collect, store and handle your data – These can be viewed on our website.

Evolve are recruiting for leading Ophthalmology company who are seeking a Hospital Sales Representative to join their team. You’ll manage our client’s glaucoma pharmaceutical business, driving sales, promotion, and education of the product portfolio. Alongside this, you will build and nurture strong relationships with key customers, positioning our client as a trusted partner and leading presence in the glaucoma and dry eye market. This is a full-time position working across the Lincolnshire, Peterborough, Cambridge & Norfolk territory. What’s on offer? Excellent Salary & Benefits: A competitive starting salary, along with an exceptional bonus, company car or allowance, private healthcare, Death in service, pension and more! Innovative Product Portfolio: Work with a leading Ophthalmic product range in a specialist market. Stronger Voice - Put your ideas and input carry real weight in shaping products, strategy, and company culture. Connected Team Culture - Enjoy a more personal, supportive, and collaborative work environment. Ideal Requirements for the Hospital Sales Representative • ABPI Qualified Professional – Bring your recognised industry accreditation and expertise to a role where you can truly make an impact., • NHS & Secondary Care Sales Pro – Experienced in healthcare sales with a genuine passion for ophthalmology and improving patient outcomes., • Proven Sales Achiever – A strong track record of exceeding targets and driving business growth in a competitive market., • Master of Influence – Exceptional selling, negotiation, and networking skills that build lasting partnerships and open new opportunities., • Strategic Account Manager – Skilled at taking a territory management approach, developing tailored plans to maximise results and customer satisfaction., • Compelling Communicator – Confident, polished, and persuasive with excellent presentation skills to engage stakeholders at every level. Role Responsibilities for the Hospital Sales Representative • Build Powerful Partnerships – Develop and nurture strong relationships with key customers across both the NHS and private sector, becoming a trusted partner in delivering outstanding healthcare solutions., • Drive Impactful Conversations – Lead engaging, strategic, and sometimes challenging discussions that move account objectives forward and strengthen long-term collaboration., • Map the Key Players – Create a clear and effective stakeholder map, identifying decision-makers, influencers, and access champions to maximise opportunities., • Own Your Territory – Take charge of your area with a strategic business plan that drives growth, manages resources, and delivers measurable results., • Leverage Data for Success – Maintain accurate, up-to-date customer records and use this valuable insight to inform planning, reporting, and smarter decision-making. Recruitment Process 2 stage interview process. Connect with a hiring manager and team who are committed to guiding your career and helping you make an impact. Excited to learn more? Click apply or reach out to Katie Fisher on 0113 457 0777 for full details! Get to know your recruiter, Katie, on our website: ___ Evolve is a leading recruitment and outsourcing organisation, operating within the Pharmaceutical, Healthcare, Medical Device and Life Science sectors. Equal opportunities are important to us. We believe that diversity and inclusion are critical to our success as a company, We encourage applications from everyone, regardless of background, gender identity, sexual orientation, disability status, ethnicity, belief, age, family or parental status, and any other characteristic.

The Deichmann store, located in Serpentine Green, Peterborough is seeking a Store Manager to join our busy store. The salary for this role is £34,500 + the potential to earn commission and bonuses. Training for this role will take place in our city centre Peterborough store. Ideal candidate: This is a really exciting opportunity for a successful and ambitious Store Manager to join a successful, international retail brand. Already demonstrating a superior level of performance within their own store, the successful candidate will have the right mix of managerial and technical aptitudes in order to drive performance. You will have previous experience of working as a Store Manager in fast paced, high volume retail setting. You must be able to problem solve and think on your feet, alongside this you will be a people person, have the ability to plan and co-ordinate resources and be passionate about the delivery of exceptional customer service. Key activities: • Motivate and coach the team to deliver excellent customer service, • Lead by example in promoting and recommending complimentary shoe care products, demonstrating confidence with selling and excellent product knowledge, ensuring the very best level of customer service, • Stock management, • Analysing and interpreting sales performance data and reports, • Making recommendation for ways to improve sales performance, based on analysis of quantitative and qualitative data and identification of customer insights, • Ensure all company standards are implemented and maintained i.e. merchandising, admin, • Delivery of all KPI’s, meeting all company standards, • Recruitment and training of the team Personal characteristics: • A hands on leader, with experience working as a Retail Store Manager, • A positive flexible approach with a can do attitude, • Energy and enthusiasm, with ability to work under pressure, in a demanding fast paced environment, • Have the confidence and ability to motivate, coach and inspire the team, • Highly numerate, • Attention to detail, • Good communicator, • Be methodical, organised and have a structure approach to work, • Be fully flexible across the week If you would like to join the team at Deichmann UK as our Store Manager and you meet the job requirements, please click apply. We’d love to hear from you! By applying for this role, you are confirming you have the right to work in the UK and will be required to submit the required documentation.

Role: Head of S&OP / Head of Planning (Supply Chain) Salary: £74,000 + Car Allowance (£6,275 minimum) + 5% Bonus Location: Peterborough (site-based initially, moving to hybrid working after 6 months) Pod Talent are currently working with a well-known and highly successful UK business on an exciting opportunity for a Head of S&OP to join during a key period of transformation. This is a high-impact leadership role where you will be responsible for modernising and elevating the planning function, improving visibility across demand and supply, and creating a more forward-looking, data-led S&OP process. The business has strong foundations in place, but now requires an experienced leader to bring structure, challenge existing ways of working, and build a best-in-class planning capability. You will lead established demand and supply planning teams (8 direct reports in total) and play a critical role in improving forecasting accuracy, stock strategy, systems utilisation, and cross-functional alignment. Key Responsibilities for the role of Head of S&OP / Head of Planning - • Lead and develop the end-to-end S&OP process, driving improved planning maturity across the business, • Manage teams across Demand Planning and Supply Planning, building capability, accountability, and performance, • Improve forecast visibility beyond the current short-term planning horizon to enable better supply and resource planning, • Implement robust short-term planning processes, whilst shaping a longer-term automation roadmap, • Review and optimise stock holding strategy, working capital, and SKU lifecycle management, • Drive a more efficient JIT-led replenishment model, • Evaluate current ERP / MRP system capability and maximise planning functionality within existing systems, • Improve planning data, reporting, KPIs, and decision-making processes, • Work closely with Procurement, Operations, and wider business stakeholders to align supply with demand, • Lead change management across long-standing teams, embedding stronger behaviours and performance standards Key Experience Required for the Position of Head of S&OP / Head of Planning - • Proven leadership experience within S&OP, Demand Planning, Supply Planning, or Integrated Business Planning, • Strong understanding of forecasting, inventory strategy, replenishment, and supply planning principles, • Experience transforming or improving planning functions within complex operational environments, • Strong systems capability - ERP / MRP knowledge essential (SAGE exposure beneficial but not required), • Commercially minded with the ability to reduce cost, optimise stock, and improve service simultaneously, • Experience leading established teams through change and performance improvement, • Confident stakeholder manager able to influence cross-functionally and challenge constructively, • Open on industry background - product-based, manufacturing, distribution, retail, wholesale or similar environments all of interest This is an excellent opportunity for someone looking to step into a visible leadership role with genuine scope to shape a function and make lasting impact. If interested, please apply here or email

Lifecycle Consultant – Aftermarket Location: Peterborough (100% Onsite) Pay Rate: Up to £44.04 per hour (Umbrella) Duration: 12-Month Initial Contract (Likely to extend) Working Hours: Monday – Friday, 8:00 am – 4:00 pm The Opportunity We are looking for a Lifecycle Consultant to join our Industrial Power Systems Division in Peterborough. This is a pivotal role focused on driving initiatives that support parts and service growth through the entire product lifecycle. You will work within a team of consultants and engineers, playing a key role in protecting and improving our aftermarket legacy with a heavy focus on the New Product Introduction (NPI) phase. This is a diverse, high-impact position where you will be involved across the business and multiple functions, providing a unique opportunity to support exciting new product launches. Your Role As the successful candidate, you will bridge the gap between engineering design and commercial growth. You will lead aftermarket deliverables within large-scale projects to ensure we meet budget and strategy goals while developing new repair options that drive global parts sales. Key Responsibilities: • NPI Leadership: Lead aftermarket deliverables within NPI or product deletion projects, managing tasks to be on time and within budget., • Drive Revenue: Implement and improve solutions using key metrics to drive parts revenue and Percentage of Parts Sales (POPS) growth., • Lifecycle Management: Optimize parts branding, intellectual property, and supplier agreements throughout the product lifecycle., • Technical Influence: Work with Engine Design and Product teams to ensure that product design reflects specific aftermarket requirements., • Continuous Improvement: Identify and implement process improvements with measurable results across all levels of management. What We’re Looking For We need a technical project specialist who can lead by influence and analyze complex data sets to provide clear direction. Requirements: • Experience: Minimum of 5 years in the automotive, off-highway, or a similar technical product industry., • Technical Knowledge: Extensive understanding of NPI, product deletion, design change, and service/repair/overhaul solutions., • Systems: Proficiency in reading engineering drawings using Teamcenter or equivalent engineering data management systems., • Hard Skills: Strong project management skills and a solid technical awareness of diesel engines and parts., • Soft Skills: A self-starter with excellent time management and the ability to communicate and influence at all levels of an organization. Why Apply? This role offers the chance to be part of a high-performing team of six within a broader lifecycle and commercial group. You will have the opportunity to directly impact the success of new product launches while working in a collaborative, professional environment. Ready to drive aftermarket excellence? Apply today.

This role in summary Beko UK&I are looking for a talented and experienced E-commerce Technical Leader to join our Direct to Consumer team. Reporting to the Head of D2C, this multi-faceted role will help to deliver a wide range of digital projects and the day-to-day management of our Direct to Consumer Websites, Marketplaces and CMS. Ultimately, the focus of this role is to help drive our business forward by delivering our digital objectives, including improvements to our user experience, increased conversion, and Sales. Your responsibilities will include • Oversee daily technical management of e-commerce platform and multiple websites, CMS, including content updates, campaign setup, landing pages, and data handling., • Manage four Hotpoint websites (two D2C and two internal) from a technical CMS perspective, ensuring seamless updates, optimized navigation, and strong user experience., • Monitor and analyze performance using GA4, FullStory, and Hotjar to drive datainformed UX and content improvements., • Lead CRO initiatives to boost onsite performance and contribute to measurable business growth., • Drive content optimization projects and coordinate new product launches across all websites., • Triage and prioritize incoming requests, collaborate with regional and crossfunctional teams, ensure timely delivery of features, and track/report digital metrics to support eCommerce growth. Additional Info Furthermore, you will be responsible of • SEO management including content optimisation, automated/manual technical checks, page speed optimisations, search console and SEMrush. Working closely with external SEO agencies and content resources (internal/external) to implement recommendations., • Website testing for new feature launches, including regular website audits to ensure an optimal customer journey. Regular use of cross-browser/device testing., • Creating and managing documentation of existing/new features and processes., • General admin, such as data updates, raising purchase orders and invoices. Minimum requirements • 4+ years of hands‑on experience in a similar role within a commercial environment, with a strong focus on the technical management of e‑commerce platforms., • Solid technical background and practical experience with Web technologies and infrastructure, including close collaboration with third‑party suppliers and internal stakeholders and multiple business units, • SEO expertise, including implementation of SEO strategies and practical experience with Google Analytics, Google Data Studio and PowerBI., • Experience HTML and CSS, essential for CMS management., • Good understanding of website design and UX to enhance customer journey and overall brand experience., • Proven ability to operate in a fast‑paced, multi‑project environment, with strong project management skills to ensure effective prioritisation and delivery., • Degree-level qualification or equivalent in a technical/digital field., • Good knowledge of GDPR and data transfer best practices., • Understanding of eCommerce trading and overall website management., • Basic image editing skills. Nice to Have: • Previous experience with Vtex ecommerce., • Knowledge of programming concepts is desirable due to working closely with development agencies., • Good understanding of website technologies and infrastructure, including DNS, Cloud., • Previous experience with large websites and CMS migrations is desirable. Why Join Beko Europe Beko Europe is a leading home appliance company, dedicated to improving the lives of its consumers through a diverse range of innovative and sustainable products and solutions. As part of Beko, recognized as the "Number 1 Home Appliances Company in Europe," Beko Europe offers a portfolio of 16 brands including Beko, Hotpoint, Indesit, Whirlpool, Leisure and Blomberg, to name a handful, all providing quality appliances to millions of households. Beko Europe promotes sustainability in the home, using advanced technology, skilled human resources and strong manufacturing capabilities to contribute to a better future. Our design approach focuses on people-centric solutions that seamlessly integrate functionality, sustainability and appealing design. The company is committed to exceeding consumer

Lifecycle Consultant – Aftermarket (Contract) Peterborough | Onsite 12‑month contract (high likelihood of extension) £44.04 per hour (Umbrella) We're supporting a large engine OEM to find a Lifecycle Consultant – Aftermarket to support a growing pipeline of new product introductions (NPI) and lifecycle activities within the Industrial Power Systems Division. This role sits at the heart of engineering, product and aftermarket, focusing on ensuring products are designed, launched and managed to maximise aftermarket parts and service growth across the full lifecycle. The role As a Lifecycle Consultant, you will lead and coordinate aftermarket deliverables across NPI and product lifecycle projects, influencing design and strategy decisions to protect and grow long‑term parts revenue. You’ll work closely with engineering, product management, supply chain, manufacturing, quality and commercial teams, acting as the aftermarket voice throughout the lifecycle. Key responsibilities • Lead aftermarket activities within New Product Introduction (NPI) and product deletion projects, • Influence product design to ensure aftermarket readiness (service, repair and overhaul solutions), • Develop and support business cases for aftermarket parts and service growth, • Drive initiatives to increase parts revenue, POPS and service levels, • Optimise lifecycle elements including parts branding, IP protection, supplier agreements and design changes, • Use data, metrics and analysis to track performance and drive continuous improvement, • Act as a key stakeholder across the business, influencing without direct authority About you You’ll be a strong technical–commercial hybrid, confident working in complex, cross‑functional environments. Essential experience: • Minimum 5 years’ experience within automotive, off‑highway, diesel engines or similar technical products, • Proven project management experience within NPI or product lifecycle environments, • Strong understanding of aftermarket operations, parts strategy and business cases, • Technical awareness with ability to read and understand engineering drawings, • Experience using Teamcenter or similar PLM / engineering data management systems, • Confident communicator, able to influence engineering and commercial stakeholders Desirable: • Exposure to parts marketing, service strategy or lifecycle optimisation, • Experience within a large, global OEM environment What’s on offer • Opportunity to work on high‑profile new product launches, • Broad exposure across engineering, product and commercial teams, • Long‑term contract potential with a globally recognised brand, • Competitive £44.04/hr umbrella rate Working pattern • Onsite role based in Peterborough, • Monday to Friday, typically 8:00am – 4:00pm

Senior Mendix Developer Wealth & Asset Management (Outside IR35) Rate: Up to £450/day You can get further details about the nature of this opening, and what is expected from applicants, by reading the below. Contract: 2-month initial (likely extension to 6 months due to a large product backlog) IR35:Outside Location: UK-based (remote/Hybrid depending on client) Overview A wealth management client is seeking a Senior Mendix Developer with strong full-stack capabilities and direct experience working with securities, funds, or broader investment/asset management systems. Broader FS/Wealth Management experience is also fine. Youll be rebuilding an existing funds management and reconciliation system, currently in MS Access, and migrating/re-engineering it into a robust Mendix application as part of a fixed-term transformation project. Key Responsibilities * Lead technical delivery of a Mendix-based funds management & reconciliation platform * Translate the existing MS Access solution into scalable Mendix modules * Work closely with SMEs from wealth/asset management * Implement data flows, validation, reconciliation logic, and reporting * Ensure best practices in Mendix architecture, security, and performance * Contribute to ongoing backlog items (likely extension to 6+ months) Required Experience * Senior-level Mendix developer (Advanced cert ideal) * Proven full-stack Mendix development capabilities * Experience working with securities, funds, asset/wealth management, or financial products * Background in building transactional or reconciliation systems * Ability to work autonomously in a fast-paced transformation project. Start dates will be early next year. xrnqpay Get in touch and one of our team will reach out as soon as possible.

What the Aftermarket Project Manager will do: * Lead the aftermarket deliverables within large NPI (New Product Introduction) or product deletion projects to ensure aftermarket growth and manage tasks to be on time, within budget, and aligned with the product strategy * Positively impact exist

Job Title: Production Engineer Type: Permanent Location: Newark Working Hours: 37.5 hours per week, 8:00 AM - 4:30 PM, Monday to Friday (office / site-based) Company Overview: Join a leading electronics manufacturer, providing innovative solutions for major global organisations across industries such as marine, medical, aerospace, defence, and industrial automation. The company is currently experiencing significant growth and requires a skilled Production Engineer to support the optimisation and improvement of manufacturing operations. Key Responsibilities: * Analyse and improve existing production processes to increase efficiency and reduce waste. * Support New Product Introduction (NPI) and ensure smooth transition from design to manufacturing. * Identify and resolve production issues through root cause analysis and corrective actions. * Create and maintain manufacturing documentation, including work instructions, process flows, and risk assessments. * Lead and support continuous improvement initiatives including Lean, Kaizen, and 5S. * Provide technical engineering support to production teams on the shop floor. * Monitor and report on key performance indicators (KPIs) related to quality, throughput, and reliability. * Ensure compliance with health, safety, and quality standards in all processes. * Work closely with design...

GBR Recruitment Ltd are working exclusively with a market leading Agricultural Machinery manufacturer, recruiting for an experienced hands on Engineering Manager to successfully lead their engineering department. This is a key senior management team role, where you will mentor, coach & develop the Engineering team to be the very best they can be. You will also play a key role in influencing new product development & product innovation, driving continuous improvement across all Agri products & engineering processes. The client is seeking someone from an Agricultural Machinery (Tractors, Combines, Telehandlers) background or similar specialist products within Construction Plant Machinery or other types of complex high capital specialist machinery / specialist vehicles. You will have formal engineering qualifications & strong knowledge of mechanical, electrical, hydraulic & pneumatic components, parts & systems. Duties: * Responsible for leading the engineering team & managing workloads, ensuring the successful delivery of Agri machinery engineering projects & product improvements. * Overseeing engineering processes including Engineering Change Requests (ECR) suggests changes, while an Engineering Change Notices (ECN), BOMs, as well as project planning * Setting timelines for strategic projects & ensuring the delivery of them * Provide accurate costings & quotations for the sales & buying teams * Drive CI, LEAN m...

Are you looking to join a successful and growing organisation who are committed to creating a great safe place to work where all employees have the opportunity to contribute, grow and develop? Portakabin are looking for a Commercial Manager to join our successful team to cover the East midlands -Nottingham Area(Nottingham, Derby and Leicester). You must live within this region and be able to travel throughout it and also stay overnight at National locations if required. As an experienced Commercial Manager, you will lead a team to achieve commercial targets in support of the Business Unit commercial strategy. Your remit will be to coach the team in the field and also support in the office to maximise performance, achieve targets, drive strong customer engagement and deliver an excellent customer experience. Role Details: • Annual salary up to £55,000 - dependent on skills and experience., • Travelling weekly covering the Nottingham/Derby/Leicester Area., • Uncapped Commission, • Permanent, • Company Car, • Full UK Driving Licence, • Eligible for Private Medical Scheme, • Annual leave of 25 days per annum plus bank holidays and opportunity to buy an additional 5 days each year., • Plan and allocate commercial activity to the area to deliver commercial targets, grow market share and maximise EBITDA potential., • Collaborate with wider teams to deliver excellent customer service and product quality from order win through the entire customer journey, ensuring a seamless and high-quality customer experience., • Maintain strong internal relationships and work with the Regional Project Manager to programme and manage delivery expectations with customers., • Promptly resolve any service issues that could impact customer satisfaction, escalating when necessary., • Coach team members to win new business, grow existing customer accounts and maintain a strong pipeline with high conversion rates., • Develop team members by ensuring they have the skills required to perform their duties and providing targeted coaching to maximise individual and team performance., • Hold regular conversations with individuals and teams to set clear expectations, promote accountability and sustain high performance standards., • Manage and develop Key accounts and close larger opportunities within this region supporting the commercial team to enter into contract with clients, • Identify and implement commercial improvements that increase efficiency, enhance competitiveness and elevate the customer experience., • Ensure compliance with company policies, governance standards and all legal and regulatory requirements., • Educated to degree level, or equivalent relevant commercial experience., • Minimum GCSE (or equivalent), including maths and English., • Experience of managing and developing commercial teams., • Background in B2B sales with a track record of delivering results., • Experienced in selling and a confident negotiator with good influencing skills., • Demonstrated the ability to manage a wide customer account base effectively., • Demonstrated ability to identify and convert new business opportunities., • Commercially aware, keeping up-to-date with competitor activities and market trends., • Track record of delivering efficiency improvements., • Proficient in using Microsoft Office including MS Excel, Word and PowerPoint. NOTE: If we receive a high volume of applications for a role, we reserve the right to close a vacancy earlier than scheduled. • Contributory pension including life insurance benefit, • A range of dedicated health and wellbeing services, • Cycle to Work Scheme, • Employee Benefits Program (Discounts at 100s of shops, gyms, restaurants and even holidays!), • Learning & development opportunities and resources, • Opportunity for career progression, • A chance to give back to your community with an annual volunteering day

As a leading UK life and pensions mutual insurer with a proud history dating back to 1843, we exist to help people live financially confident lives – protecting their income while they work and maximising it when they stop. Today, over one million members and customers trust us to look after their futures, families and finances. Joining us means becoming part of a team that puts our members, customers and advisers at the heart of everything we do. We’re committed to creating an inclusive culture where colleagues can thrive. We are proud to have built a workplace where our colleagues feel welcomed, respected, supported and valued – reflected in our recognition as one of the Financial Times UK’s Best Employers in 2025 and 2026. We celebrate individuality and believe our differences make us stronger, so bring your true self and help shape the future of LV=. We are pleased to offer a fantastic opportunity for a B2B Marketing Manager to join our Savings & Retirement business on a fixed-term basis of 12 months. Working closely with the Head of Marketing, you will be responsible for driving and delivering a marketing and communications plan to promote our investment products to external audiences, including financial advisers and consumers. You’ll play a lead role in creating compelling product stories and will oversee the central coordination of the production of investment materials, literature and communications, working collaboratively with our investment experts, proposition and sales teams, plus external partners. You’ll also work collaboratively with colleagues to deliver creative and innovative marketing campaigns designed to engage and inspire our audiences, utilising all channels across the marketing mix. You’ll ensure all planned activity remains within budget and aligns to plan, maximising commercial value. Key Responsibilities • Managing a team of 2-3 direct reports and providing leadership for coordinated business as usual (BAU) and planned campaign activities, to support the successful delivery of wider product and sales business objectives., • Effectively managing key relationships with all relevant internal and external parties (including agencies, networks and media owners)., • Directing and developing the delivery of marketing communications, materials and content., • Evaluating commercial and reputational value of marketing activity., • Assessing current market trends, competitor and distributor behaviours and drivers within the market to determine campaign activity and messaging opportunities to develop competitive advantage., • Ensuring full compliance with LV= policies and standards, and other regulatory and legislative requirements., • Attending quarterly events and sales events periodically. About You Our ideal candidate will… • Be a passionate, proactive marketing professional with experience in financial services., • Be able to communicate complex content clearly and simply, demonstrating the value LV= offers through jargon-free communications, • Be experienced in line management, with an ability to motivate and inspire others, and deliver constructive feedback in an approachable and positive manner., • Effectively identify, understand and interpret strategic and tactical marketing opportunities., • Plan and project-manage effectively, with the ability to deliver key pieces of work in a timely and accurate manner., • Communicate and collaborate with different stakeholders and coordinate a wide range of tasks to deliver performance., • Competently work with technical information, with a keen eye for detail. This role is a Band C in the LV= salary structure. Please note all salary sacrifice benefits are subject to National Minimum Wage requirements i.e. you are unable to select any benefits that would reduce your base pay below the minimum wage threshold. At LV= Life and Pensions, you’ll go above and beyond to do the right thing for our customers. We’ll reward your hard work with an attractive, competitive salary and benefits package, which includes: • 30 days' holiday, • The opportunity to buy or sell up to five days of holiday, • An annual bonus scheme based on company and personal performance, • Flexible benefits, including a cycle to work scheme, personal accident insurance, critical illness cover, private medical insurance, and dental insurance, • Competitive pension scheme - LV= Life and Pensions will double-match the amount you pay, up to 14% (subject to National Minimum Wage requirements), • Group Life Assurance of four times your basic pay to your dependents (you’ll have the option to increase this to 8 x cover), • Group Income Protection, if you enrol into the pension scheme and reach 5 years of service, • Employee Assistance Programme (EAP) service for support when you need it, • Virtual GP service, • Shared parental leave, • Up to 20% discount on our life products for you and your immediate family. We’re proud of our inclusive culture at LV= and, as an equal-opportunity employer, we continually work to remove unconscious bias from our recruitment process. We value our colleagues for what they bring to our team regardless of any protected status or characteristics they may have. Talk to us about flexible working as part of your application - if it’s right for you, our members and customers, and our business, then we’ll do everything we can to make it happen. We’re also open to conversations about flexible working as part of your application - if it’s right for our customers, our business and for you, then we’ll do everything we can to make it happen. Please note that we are unable to offer Skilled Worker Visa Sponsorship for this role. Therefore, you must ensure that you are eligible to work in the UK without our sponsorship in order for your application to be considered. Go on, bring your true self to LV=.

Contract type: Permanent Hours: Full-time, 35 hours Location: Head Office, Nottingham (Hybrid working, minimum 2 days per week) Application process: Please apply via the application button which will direct you to our careers site. If you require any adjustments to assist you in applying, please contact At Nottingham Building Society our talent acquisition approach is rooted in openness and inclusive hiring, so even if you don’t feel you tick every box, we’d still genuinely love to hear from you. Take the helm of the entire marketing engine at Nottingham Building Society and shape the future of an ambitious, purpose driven brand. You will set the vision for growth, customer value and marketing impact, transforming bold commercial goals into powerful marketing outcomes. Leading expert channel teams and cross functional collaborators, you will modernise marketing with cutting edge data, AI, personalisation and seamless omnichannel experiences. Poised as the successor to the CMO, you will operate with enterprise-wide influence, creative courage and sharp commercial instinct, building a high performing, future fit marketing organisation that drives revenue, margin and long term growth. This is your opportunity to define what great looks like and elevate NBS to its next era. Here’s a taste of what you will be doing as a Head of Marketing at Nottingham Building Society: • Enterprise & Commercial Leadership – Own the marketing strategy, investment decisions and commercial outcomes, influencing product, pricing and distribution through insight., • Growth & Performance – Deliver full funnel growth across all channels, ensuring activity drives acquisition, engagement, loyalty and commercial value., • Brand & Creativity – Lead brand positioning and governance while driving creative excellence and insight led storytelling., • ✨ Customer & Brand Advocacy – Represent marketing priorities at senior forums and shape enterprise wide strategy., • Data, Digital & AI Capability – Build future fit capability across first party data, AI, automation, personalisation and connected omnichannel experiences., • Measurement & Optimisation – Set the measurement framework and performance rhythms to enable real time optimisation and clear ROI., • Matrix & People Leadership – Lead and develop a high performing team, aligning channel experts and partners behind shared goals., • Strategic & Commercial Acumen – Skilled in enterprise level strategy, value creation, P&L drivers, investment allocation and ROI., • Marketing Excellence – Deep expertise in, proposition development, go to market launches, full funnel growth, CRM and lifecycle marketing., • Data, Digital & AI Fluency – Strong command of first party data strategy, segmentation, experimentation and AI or automation for personalisation and optimisation., • Matrix & Executive Leadership – Confident influencing at Exec level, aligning cross functional teams, setting clear measures and driving accountability., • Creative & Storytelling Leadership – Able to lead distinctive brand building, insight driven storytelling and high craft creative standards., • ️ Change & Transformation Capability – Experienced in operating model redesign, capability building and improving processes and governance., • Proven Track Record – Led multi-disciplinary marketing teams in regulated industries, delivered brand evolution, built always on data driven marketing, influenced ExCo or Board, and grown talent., • Competitive Package : Fair salary benchmarked against market data, annual discretionary bonus, car allowance and 29 days holiday plus bank holidays., • Health & Wellbeing : Access to Bupa Private Medical , mental health first aiders, and a suite of wellbeing resources to support you inside and outside of work., • Work-Life Balance : 35-hour working week for full-time roles, with flexibility to help you perform at your best., • Career Growth : Ongoing personal and professional development, we’ll support your ambitions and help you grow your potential., • Inclusive Culture : Be part of a friendly, values-led team that genuinely cares about doing the right thing for colleagues and customers., • Giving Back : Use two paid volunteering days each year to support causes close to your heart, through our Samuel Fox Foundation., • Sustainability Focus : Join a business committed to reducing its carbon footprint and making a positive impact on the environment. We proudly embrace and celebrate diversity as a fundamental cornerstone of our values. We believe that a diverse and inclusive workplace is not just essential for our success but is also a reflection of the vibrant communities we serve. Our commitment to diversity extends beyond our internal culture to the way we approach advertising and engage with our customers. Our commitment means actively working to eliminate barriers and biases that may hinder equal opportunities within our organisation. We strive to ensure that all individuals, regardless of background, have an equal chance to thrive and advance in their careers. We acknowledge that diversity is not just a goal to be achieved but a continuous journey toward creating an environment that embraces differences and promotes equal opportunities for all. We are committed to creating an inclusive culture that encourages collaboration, creativity, and a sense of belonging for every member of our community. We are a mutual, which means we don’t have shareholders. Instead, we’re owned by our members and use our money to do good, investing in our community, responsible causes, and – well, you. So, we’re always striving to do the right thing for our team, communities and members.Although our history spans over 170 years, our purpose of helping our members save, plan for and protect their financial futures is enduring. At The Nottingham Building Society, we are dedicated to overcoming obstacles and turning challenges into opportunities. At the heart of our mission is our unwavering commitment to breaking down barriers and building better futures by helping our customers achieve the significant milestone of owning their own home.

The Deichmann store, located in Serpentine Green, Peterborough is seeking a Store Manager to join our busy store. The salary for this role is £34,500 + the potential to earn commission and bonuses. Training for this role will take place in our city centre Peterborough store. Ideal candidate: This is a really exciting opportunity for a successful and ambitious Store Manager to join a successful, international retail brand. Already demonstrating a superior level of performance within their own store, the successful candidate will have the right mix of managerial and technical aptitudes in order to drive performance. You will have previous experience of working as a Store Manager in fast paced, high volume retail setting. You must be able to problem solve and think on your feet, alongside this you will be a people person, have the ability to plan and co-ordinate resources and be passionate about the delivery of exceptional customer service. Key activities: * Motivate and coach the team to deliver excellent customer service * Lead by example in promoting and recommending complimentary shoe care products, demonstrating confidence with selling and excellent product knowledge, ensuring the very best level of customer service * Stock management * Analysing and interpreting sales performance data and reports * Making recommendation for ways to improve sales performance, based on analysis of quantitative an...

Lifecycle Consultant - Aftermarket Location: Peterborough (100% Onsite) Pay Rate: Up to £44.04 per hour (Umbrella) Duration: 12-Month Initial Contract (Likely to extend) Working Hours: Monday - Friday, 8:00 am - 4:00 pm The Opportunity We are looking for a Lifecycle Consultant to join our Industrial Power Systems Division in Peterborough. This is a pivotal role focused on driving initiatives that support parts and service growth through the entire product lifecycle. You will work within a team of consultants and engineers, playing a key role in protecting and improving our aftermarket legacy with a heavy focus on the New Product Introduction (NPI) phase. This is a diverse, high-impact position where you will be involved across the business and multiple functions, providing a unique opportunity to support exciting new product launches. Your Role As the successful candidate, you will bridge the gap between engineering design and commercial growth. You will lead aftermarket deliverables within large-scale projects to ensure we meet budget and strategy goals while developing new repair options that drive global parts sales. Key Responsibilities: • NPI Leadership: Lead aftermarket deliverables within N...

Manufacturing Engineer / NPI Process Engineer Manufacturing Engineer required for a long term contract Peterborough (Min 12 Months, likely to become ongoing though). £39.00 FCSA Umbrella (Role is deemed inside IR35) £28.00 paye Office Based 5 days PW in Peterborough The Manufacturing Engineer is expected to function as a specialist with respect to a specific technical phase of an increase in production significantly over the next 12-18 mths the process improvement function and which generally falls within the areaof Assembly of Machinery Work assignments may be specialised in nature but may also be broad based with coordination between other staff personnel to complete a larger project. Evaluate projects to define desired results and determine logical approaches. Evaluates such NPI factors as cost, assembly, equipment, space, etc. as well as other information needed to determine requirements. Prepares feasibility studies for appropriateness and cost effectiveness and submits recommendations accordingly. Results contribute to the effective management decisions in determining the most efficient processes, methods, machinery, tools, equipment, services and systems needed in the manufacture of product. Actual work assignments may be typified as follows: Developing, analysing and managing Manufacturing/ Assembly / NPI Projects. Lead manufacturing engineering deliverables across all NPI gateways. Own readiness reviews and ensure ME inputs are approved prior to each gateway. Working with facility Manufacturing Engineers to ensure new processes work seamlessly with the existing manufacturing processes. Deliver process design, PFMEA, control plans, standard work and documentation. Manage tooling, fixtures, and equipment from specification to commissioning. Support prototype, pilot, and validation build phases, ensuring issues are resolved between gateways. Collaborate with Product Engineering on Design for Manufacturing and change management. Support PPAP, capability studies, risk management, and launch readiness metrics. Act as Manufacturing Engineering lead for programme governance, technical reviews, and gateway approval sign-off. Strong NPI, programme delivery, or launch engineering experience in automotive or similar. Knowledge of engine assembly, machining, or precision manufacturing processes. Proven delivery within gated NPI processes (automotive preferred). Strong PFMEA, control plan, statistical validation, and problem-solving capability. Excellent stakeholder and technical leadership skills. Leading, developing and supporting timely Design for Manufacture Best Practices, Operation Excellence Process Validation Best Practices and Lean Operation Excellence and Manufacturing Best Practices. Engaging in creative problem solving to address operational issues including: efficiency improvements, process bottlenecks, quality concerns. (APQP/PPAP experience Desirable) Working with internal and external suppliers to develop and manage projects to ensure efficient and cost- effective systems and processes to produce quality products. Essential Skills Previous experience within something associated or very similar to Manufacturing of High Value, Low Volume manufactured products preferred Demonstratable experience in all areas related within NPI Planning, Increased work capacities, whilst going through an increase in production over a relatively short period of time Process Improvement, Process Optimisation, Design, Develop, and implement Manufacturing Systems. Strong Project management experience & able to demonstrate previous project where production has been significantly increased in volume APQP/PPAP interpretation & recommendations related to Workforce/Labour allocation Demonstrable improvements on Processes & Process optimisation This position encompasses process improvement, Process Optimisation, tooling, plant engineering, supplier relationship building, releasing, machine shop, fabrication, assembly, etc. wherever a specific technical assignment may be needed. Adheres to established standards, policies and practices relating to quality, cost reduction, safety, ergonomics, etc. in performing assigned duties. This role is inside IR35, and has a pay rate of £39 /hr FCSA Umbrella depending upon experience and qualifications Paye also available (c.£28.00) TPBN1_UKTJ

Senior Electronics Design Engineer - Mixed Signal An exciting opportunity has arisen for a Senior Electronics Engineer to join a Cambourne, Cambridgeshire based market-leading manufacturer of specialist fire detection systems. Their innovative products are trusted globally in high-stakes environments such as museums, warehouses, theatres, and even commercial aviation. As a Senior Electronics Design Engineer, you will play a pivotal role in leading and mentoring a team of talented engineers. Youll bring technical expertise, strategic insight, and a passion for delivering exceptional electronic designs that make a tangible difference in the real world. Key Responsibilities of this Cambourne, Cambridgeshire based Senior Electronics Design Engineer job: Lead the design and development of complex analogue and digital electronic circuits, including schematic capture, component selection, and design reviews. Provide hands-on technical leadership throughout the entire electronics product lifecycle - from concept, feasibility, and design, through to prototyping, testing, certification (including ATEX), and production handover. Ensure robust designs suitable for high-reliability and safety-critical applications, including high-risk and ATEX-certified environments. Plan, manage, and oversee project delivery, ensuring alignment with technical and commercial objectives. Skills & Experience Required for this Senior Electronics Design Engineer job: Proven experience in analogue and digital circuit design, including schematic capture and verification using tools like Altium 365 Strong senior-level background with project ownership, team leadership, and mentoring responsibilities. Industry experience with regulated or high-risk products ideally including ATEX or other safety-critical standards Degree-qualified in Electronics, Electrical Engineering, or a closely related discipline This is a fantastic opportunity to join a forward-thinking Cambourne, Cambridgeshire based business that values innovation, continuous improvement, and the development of its people-all while delivering life-saving technology.

Lifecycle Consultant - Aftermarket Location: Peterborough (100% Onsite) Find out more about the daily tasks, overall responsibilities, and required experience for this opportunity by scrolling down now. Pay Rate: Up to £44.04 per hour (Umbrella) Duration: 12-Month Initial Contract (Likely to extend) Working Hours: Monday - Friday, 8:00 am - 4:00 pm The Opportunity We are looking for a Lifecycle Consultant to join our Industrial Power Systems Division in Peterborough. This is a pivotal role focused on driving initiatives that support parts and service growth through the entire product lifecycle. You will work within a team of consultants and engineers, playing a key role in protecting and improving our aftermarket legacy with a heavy focus on the New Product Introduction (NPI) phase. This is a diverse, high-impact position where you will be involved across the business and multiple functions, providing a unique opportunity to support exciting new product launches. Your Role As the successful candidate, you will bridge the gap between engineering design and commercial growth. You will lead aftermarket deliverables within large-scale projects to ensure we meet budget and strategy goals while developing new repair options that drive global parts sales. Key Responsibilities: • NPI Leadership: Lead aftermarket deliverables within NPI or product deletion projects, managing tasks to be on time and within budget., • Drive Revenue: Implement and improve solutions using key metrics to drive parts revenue and Percentage of Parts Sales (POPS) growth., • Lifecycle Management: Optimize parts branding, intellectual property, and supplier agreements throughout the product lifecycle., • Technical Influence: Work with Engine Design and Product teams to ensure that product design reflects specific aftermarket requirements. We need a technical project specialist who can lead by influence and analyze complex data sets to provide clear direction. Requirements: • Experience: Minimum of 5 years in the automotive, off-highway, or a similar technical product industry., • Technical Knowledge: Extensive understanding of NPI, product deletion, design change, and service/repair/overhaul solutions., • Systems: Proficiency in reading engineering drawings using Teamcenter or equivalent engineering data management systems., • Hard Skills: Strong project management skills and a solid technical awareness of diesel engines and parts. This role offers the chance to be part of a high-performing team of six within a broader lifecycle and commercial group. You will have the opportunity to directly impact the success of new product launches while working in a collaborative, professional environment. Ready to drive aftermarket excellence? xrnqpay Apply today.

Job Description: Learn more about the general tasks related to this opportunity below, as well as required skills. Agentic Tech Lead (Contract) Location: London 2-3 times a week Industry: Financial Services / Highly Regulated Duration: 7 Months (Initial) Rate: Outside IR35 The Opportunity We are looking for a high-caliber Agentic Tech Lead to drive the engineering delivery of a cutting-edge agentic AI platform. This isn't just about prompt engineering; it's about building robust, end-to-end systems that operate within the rigorous guardrails of a highly regulated environment. As the primary technical driver, you will bridge the gap between ambitious product goals and production-grade reality. You'll be hands-on across the stackfrom AWS Bedrock and Python services to complex React integrationsensuring that agentic translates to value-driven for our customers. The Technical Requirements To thrive in this role, you must be a seasoned engineer who can reason end-to-end across complex architectures. Core Stack: Expert-level proficiency in React, Python, and AWS Bedrock. AI/Agentic Mastery: Deep, practical experience building agentic systems and orchestration concepts. You've done this before and know where the pitfalls lie. Regulated Environments: Proven track record in sectors like FinTech, Gov, or Healthcare. You understand that auditability, logging, and access control are features, not afterthoughts. Full-Stack Fluency: Ability to navigate APIs, cloud infrastructure, and frontend integrations seamlessly, even when not acting as the formal architect. Delivery Leadership: Strong experience leading engineering delivery on complex platforms, with a knack for unblocking teams and driving scope forward. Your Responsibilities Lead Delivery: Coordinate frontend, AI, cloud, and QA activities to ensure a predictable, high-quality release cycle. Bridge Product and Engineering: Collaborate with Product Managers and Architects to translate ambiguous goals into concrete, deliverable backlogs. Own the Core: Take ownership of the implementation of core platform mechanics and technical risks. Problem Solve: Act as the primary escalation point, maintaining momentum through early-stage scoping and high-ambiguity phases. Set the Standard: Implement best-in-class engineering practices, including CI/CD, maintainable codebases, and rigorous testing suitable for financial services. Mentor and Coach: Technically guide a team of engineers, upskilling them in agentic systems and production-grade AI delivery patterns. xrnqpay £600.00 - £650.00 / day Talent International UK and it's subsidiaries, Digital Gurus, Infinite Talent and Rethink act as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this opportunity, you accept the TandC's, Privacy Policy and Disclaimers which can be

At the heart of Paxton, we are innovators, we look for ways of harnessing new technology to provide better solutions for our customers. We're a global brand with nearly 40 years of experience, our team of over 400 employees is spread around the world. Are you the right candidate for this opportunity Make sure to read the full description below. We pride ourselves on creating a vibrant environment, with a focus on excellent company culture. Our teams make Paxton a great place to work with brilliant benefits that come with any role at Paxton, with an emphasis on career progression, training and development, and recognition of achievement for every employee. So, what are the benefits? • We run a great social calendar with wine tasting, cooking classes, onsite yoga, staff parties, monthly internal events and more. Its rare you wont see something going on!, • Private medical insurance (Opt in) and healthcare cash-back plan with Health Shield., • Join a Carbon Neutral company Paxton is Carbon Neutral in the UK, France, Germany & South Africa!, • Modern offices, collaboration spaces, onsite mini-gym, and a gourmet café with subsidised food., • Discounted fitness memberships up to 75% off in your area with GymFlex., • Collaborative internal group initiatives like the Green Team, EDI Team, or the Charity Team., • Tech, bike, and travel or season ticket loans., • 25-days holiday plus bank holidays, and you can buy & sell up to 5 days a year. Join our Manufacturing Engineering team in Eastbourne , where youll deliver successful New Product Introduction (NPI) across electronics (PCA) and assembly manufacturing, acting as the key interface between Product Development and Manufacturing. • Lead end-to-end NPI activity, ensuring products are delivered safely, on time, to quality and cost targets, with full production readiness at launch., • Drive Design for Manufacture, Assembly and Test (DFM/DFA/DFT), embedding Right First Time (RFT), FMEA and defect prevention principles throughout the product lifecycle., • Ensure safe process design during NPI, supporting risk assessments, COSHH and compliance with HSE and ISO9001 requirements., • Define and optimise manufacturing processes, equipment, layouts, workflows and documentation, ensuring effective handover into production., • Identify opportunities to reduce cost, waste, complexity, rework and scrap through design and process optimisation, including support for CapEx decisions., • Work closely with Product Development, Quality, Operations and Manufacturing Engineering teams to resolve issues, prioritise workload and communicate progress across multiple projects., • Act as a manufacturing subject matter expert, supporting continuous improvement of NPI processes and mentoring junior engineers., • Experience in a similar NPI or Manufacturing Engineering role within electro-mechanical manufacturing., • Strong application of DFM principles and experience collaborating closely with design teams., • Confident working across multi-disciplinary and multi-site teams with clear, effective communication skills. We want to collaborate with you and hear your ideas, most of all, we want people to enjoy the journey with us. Take a look at what our team thinks of working here

Graph Database Specialist (Neo4j / PostGIS) Remote (Europe) | AI-First Geospatial Platform Make your application after reading the following skill and qualification requirements for this position. A product-led tech company is hiring a Graph Database Specialist to build a Neo4j + PostGIS platform at the core of its product. This is a high-impact role where the graph + geospatial layer is the competitive advantage, not just infrastructure. Youll design, scale, and optimise a production-grade data platform handling complex, real-world relationships. Key Responsibilities • Design and optimise Neo4j graph models and Cypher queries, • Build scalable, idempotent ETL / ingestion pipelines, • Architect PostGIS spatial schemas and queries, • Lead migration from legacy systems into graph architecture, • Expose data via high-performance APIs (REST / GraphQL), • Apply AI tools to accelerate development while maintaining data quality Requirements, • Strong Neo4j + Cypher experience (production optimisation), • Solid PostGIS / spatial SQL expertise, • Experience with graph xrnqpay modelling and large-scale ETL pipelines, • Remote: Europe time zones preferred, • Type: Full-time (strong contractors considered), • Start: Urgent

Job Description: Head of Customer Accounts Company:Trade Mastermind Please ensure you read the below overview and requirements for this employment opportunity completely. Location:Orton Southgate, Peterborough Job Type:Full-time | Permanent Work Location:In Person About Trade Mastermind Trade Mastermind is the UKs leading business education and coaching organisation for the construction and trade industry. Founded by BBC Apprentice winner Joseph Valente, we have supported over5,000 trade business owners, helping them achieve an average of370400% growth. We are proud to have opened our20,000 sq. ft. Trade Mastermind University Headquarters, the worlds first dedicated university for trades. The state-of-the-art facility includes a300-person event arena, professionalpodcast studios, andCambridgeshires first rooftop business venue. We specialise in helping tradespeople become successful business owners through structured training programmes, mastermind groups, academies and business retreats. If you are looking for a company where you can grow, thrive and make a real impact, Trade Mastermind offers an exciting and supportive environment. Relight your passion for wanting to get up every day and make a difference. Join a team that is shaping the future of the trade and construction industry. Why Join Trade Mastermind? • Collaborative and supportive team culture, • Strong opportunities for career growth, • Forward-thinking and innovative company, • Ongoing training and development, • Competitive benefits package, • Commitment to diversity and inclusion, • Modern working environment Reporting to:Chief Executive Officer (CEO) TheHead of Customer Accountsis responsible for overseeing and enhancing the entire customer journey, from onboarding through to retention and account growth. This senior leadership role focuses oncustomer satisfaction, account performance, and long-term client relationships.The successful candidate will lead the customer account management and support teams while ensuring a seamless and high-quality experience for all clients. Key Responsibilities Customer Journey Management • Oversee the full customer lifecycle from onboarding through to ongoing support, • Ensure a seamless and high-quality customer experience, • Identify opportunities to improve customer touchpoints and engagement, • Lead the management of all customer accounts, • Ensure key clients receive proactive and personalised service, • Act as the escalation point for complex customer issues, • Develop and implement customer retention strategies, • Identify opportunities for account growth and expansion, • Analyse customer data to identify trends and potential churn risks, • Lead and manage the customer account management team, • Set clear goals and performance targets, • Conduct regular performance reviews and coaching sessions, • Work closely with Sales, Marketing and Product teams, • Ensure the customer experience is consistent across departments, • Define and track customer performance metrics, • Monitor retention, satisfaction and account growth, • Provide regular reports to senior leadership, • Implement best practices in customer account management, • Improve customer engagement and service processes, • Minimum5 years experiencein Customer Account Management or Operations leadership, • Minimum5 years management experience, • Minimum3 years supervisory experience, • Strong leadership and team management skills, • Excellent problem-solving abilities, • Data-driven decision making skills, • Strong organisational and communication skills, • Experience managing customer accounts and retention strategies, • Competitive salary £75,000 + commission structure, • Company pension, • Sponsored training and development, • Modern office environment, • Company equipment provided, • Free on-site parking, • Health and wellbeing programme If you are an experienced leader with a passion for customer excellence and account management, we would love to hear from you. Apply today and become part ofTrade Masterminds mission to transform the trade industry.

R&D Senior Technologist Maximise your chances of a successful application to this job by ensuring your CV and skills are a good match. McCormick UK is seeking an experienced and commercially driven R&D Senior Technologist to develop commercially viable products from concept through to launch for key QSR customers. This role supports the EMEA strategy by delivering NPD and regeneration projects in a proactive, customer-facing capacity, while acting as a spokesperson for R&D in cross-functional environments. MAIN RESPONSIBILITIES • Manage a portfolio of NPD and regeneration projects from concept to launch, delivering sales growth., • Develop new products (including duplications) aligned to customer briefs and business strategy., • Deliver right first time solutions through strong technical and commercial awareness of ingredients, processes, and customer requirements., • Represent R&D in customer meetings, presentations, trials, and project updates, building strong customer relationships., • Lead and support factory trials, ensuring successful scale-up and launch., • Provide technical support to Operations, Logistics, and Purchasing for cost optimisation and quality improvement initiatives., • Engage with suppliers and external partners to leverage new ingredients and technologies., • Degree in Food Science or related discipline, • Relevant product development experience in sauces, dressings, condiments, or similar., • B2B and QSR experience essential., • Strong understanding of the development process, including factory trials and scale-up., • Commercially aware, able to link technical decisions to cost and business impact., • Effective cross-functional collaborator with strong project management skills., • Team management experience is an asset, or experience leading through influence. McCormick & Company is an equal opportunity/affirmative action employer. xrnqpay All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, colour, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As users of the disability confident scheme, we guarantee to interview all disabled applicants who meet the minimum criteria for the vacancy/ies.

As our Service Delivery / Customer Support Manager, you’ll lead the team that customers rely on when it matters most. When ERP software sits at the heart of a business, customer service isn’t a function – it’s a promise. You’ll own service standards, influence product decisions, and ensure

Manufacturing Engineer / NPI Process Engineer Manufacturing Engineer required for a long term contract Peterborough (Min 12 Months, likely to become ongoing though). £39.00 FCSA Umbrella (Role is deemed inside IR35) £28.00 paye Office Based 5 days PW in Peterborough The Manufacturing Engineer is expected to function as a specialist with respect to a specific technical phase of an increase in production significantly over the next 12-18 mths the process improvement function and which generally falls within the area of Assembly of Machinery Work assignments may be specialised in nature but may also be broad based with coordination between other staff personnel to complete a larger project. Evaluate projects to define desired results and determine logical approaches. Evaluates such NPI factors as cost, assembly, equipment, space, etc. as well as other information needed to determine requirements. Prepares feasibility studies for appropriateness and cost effectiveness and submits recommendations accordingly. Results contribute to the effective management decisions in determining the most efficient processes, methods, machinery, tools, equipment, services and systems needed in the manufacture of product. Actual work assignments may be typified as follows: Developing, analysing and managing Manufacturing/ Assembly / NPI Projects. Lead manufacturing engineering deliverables across all NPI gateways. Own readiness reviews and ensure ME inputs are approved prior to each gateway. Working with facility Manufacturing Engineers to ensure new processes work seamlessly with the existing manufacturing processes. Deliver process design, PFMEA, control plans, standard work and documentation. Manage tooling, fixtures, and equipment from specification to commissioning. Support prototype, pilot, and validation build phases, ensuring issues are resolved between gateways. Collaborate with Product Engineering on Design for Manufacturing and change management. Support PPAP, capability studies, risk management, and launch readiness metrics. Act as Manufacturing Engineering lead for programme governance, technical reviews, and gateway approval sign‑off. Strong NPI, programme delivery, or launch engineering experience in automotive or similar. Knowledge of engine assembly, machining, or precision manufacturing processes. Proven delivery within gated NPI processes (automotive preferred). Strong PFMEA, control plan, statistical validation, and problem‑solving capability. Excellent stakeholder and technical leadership skills. Leading, developing and supporting timely Design for Manufacture Best Practices, Operation Excellence Process Validation Best Practices and Lean Operation Excellence and Manufacturing Best Practices. Engaging in creative problem solving to address operational issues including: efficiency improvements, process bottlenecks, quality concerns. (APQP/PPAP experience Desirable) Working with internal and external suppliers to develop and manage projects to ensure efficient and cost- effective systems and processes to produce quality products. Essential Skills Previous experience within something associated or very similar to Manufacturing of High Value, Low Volume manufactured products preferred Demonstratable experience in all areas related within NPI Planning, Increased work capacities, whilst going through an increase in production over a relatively short period of time Process Improvement, Process Optimisation, Design, Develop, and implement Manufacturing Systems. Strong Project management experience & able to demonstrate previous project where production has been significantly increased in volume APQP/PPAP interpretation & recommendations related to Workforce/Labour allocation Demonstrable improvements on Processes & Process optimisation This position encompasses process improvement, Process Optimisation, tooling, plant engineering, supplier relationship building, releasing, machine shop, fabrication, assembly, etc. wherever a specific technical assignment may be needed. Adheres to established standards, policies and practices relating to quality, cost reduction, safety, ergonomics, etc. in performing assigned duties. This role is inside IR35, and has a pay rate of £39 /hr FCSA Umbrella depending upon experience and qualifications Paye also available (c.£28.00)

Our client, a well-established business based on the outskirts of Peterborough, is looking to recruit a Data Analyst/Manager to join their team on a permanent basis. PETERBOROUGH CAMBS, OFFICE BASED £35000 - £40000 Monday to Friday 09.00am to 17.00pm About the company My client is an innovative and forward-thinking brand where creativity and impact go hand in hand. They are passionate about breaking the mould—whether through the content they create, how they engage and inspire audiences, or the way they deliver their work. At their core is a strong commitment to investing in people and projects that drive meaningful, measurable outcomes. They partner with a diverse portfolio of clients, all united by a shared ambition to create positive change and sustainable growth. Key responsibilities for the Data Analyst/Manager role: As a Data Analyst/Manager, this is a senior, hands-on role where you will oversee data systems, reporting, and insights that directly influence company performance across our partner organisations. You will play a key role in shaping how data is captured, analysed, and used—both internally and for clients—ensuring our platforms deliver actionable insights and measurable impact. Data Strategy & Ownership • Lead the development of the data strategy across products and platforms, • Act as the senior data lead, supporting leadership with insight-driven decision making, • Identify opportunities to improve player acquisition, retention, and lifetime value through data Data Management & Governance • Own data architecture across CRM systems, internal platforms, and reporting tools, • Ensure high standards of data quality, integrity, and compliance (including GDPR), • Develop scalable processes for data collection, validation, and storage Analytics & Performance Insights • Deliver analysis on campaign performance, player behaviour, and outcomes, • Build dashboards and reports for internal teams and external partners, • Translate complex datasets into clear recommendations that drive revenue growth Client & Stakeholder Reporting • Support client-facing reporting, demonstrating ROI and impact of solutions, • Work closely with account management and marketing teams to optimise campaigns, • Provide insight into trends such as acquisition cost, attrition, and engagement Tools & Systems • Manage and optimise CRM and database systems (e.g., supporter databases, platforms), • Lead on implementation of BI tools, • Collaborate with product and tech teams to enhance data functionality across platforms Leadership & Capability Building • Act as the go-to expert for data across the business, • Support and mentor junior analysts as the team grows, • Promote a data-driven culture across all departments Skills and experience We are looking for a Data Analyst/Manager who has the following: • Proven experience in a senior data role (Data Manager, Senior Analyst, or similar), • Strong understanding of data in a commercial or environment, • Advanced skills in SQL, Excel, and data visualisation tools, • Experience working with CRM systems and customer / supporter data, • Knowledge of GDPR and data governance best practices, • Ability to translate data into commercial and strategic insights Sounds like a bit of you. If you are interested in this Data Analyst/Manager position, please apply today. Coulter Elite Resourcing is an independent recruitment consultancy acting on behalf of our client. Our areas of recruitment include Commercial, FMCG, Engineering, Technical, and IT. We aim to respond to every application we receive. However, due to the volume of applications, this isn’t always possible. If you have not heard from us within 5 working days, please accept our apologies that your application has been unsuccessful on this occasion

Mechanical Design Engineer Eye, Suffolk £40,000 to £45,000 + Pension + 25 Days Holiday + Bank Holiday Mechanical Design Engineer required for a company that works in several different market sectors including; food, poultry, stainless steel swimming pools & moving pool floors & agriculture as well as the design and manufacture of slurry handling equipment. The Mechanical Design Engineer role would be suited to mechanical design engineers from sheet metal, stainless steel and / or agricultural product design backgrounds. You will have strong 2D & 3D design package experience ideally on AutoCAD LT and on SolidWorks. The Mechanical Design Engineer role will principally involve producing working detail and assembly drawings. You will undertake both concept and re modification design work using stainless steel materials. You will ensure drawings are in line with technical specifications provided. The company offer comprehensive internal training and you will work within a successful team who take a proactive lead in managing the preparation of drawings, parts lists, contract documentation and other documents for a range of products. The Mechanical Design Engineer Role: • Mechanical design role using steel materials. * Producing working detail and assembly drawings. * Primarily work on SolidWorks and AutoCAD LT. * Working in a team to ensure all technical specifications are completed to a high standard. * Attend customer sites for site surveys, troubleshooting etc. * Preparation of parts lists, contract documentation and other documents for a range of products. * Working on multiple projects with short lead times simultaneously. The Mechanical Design Engineer: • Mechanical design background. * Experience in 3D and 2D CAD (Ideally SolidWorks and AutoCAD LT). * Any relevant engineering qualifications are beneficial and not essential

R&D Senior Technologist McCormick UK is seeking an experienced and commercially driven R&D Senior Technologist to develop commercially viable products from concept through to launch for key QSR customers. This role supports the EMEA strategy by delivering NPD and regeneration projects in a proactive, customer-facing capacity, while acting as a spokesperson for R&D in cross-functional environments. MAIN RESPONSIBILITIES Manage a portfolio of NPD and regeneration projects from concept to launch, delivering sales growth. Develop new products (including duplications) aligned to customer briefs and business strategy. Deliver right first time solutions through strong technical and commercial awareness of ingredients, processes, and customer requirements. Represent R&D in customer meetings, presentations, trials, and project updates, building strong customer relationships. Lead and support factory trials, ensuring successful scale-up and launch. Provide technical support to Operations, Logistics, and Purchasing for cost optimisation and quality improvement initiatives. Engage with suppliers and external partners to leverage new ingredients and technologies. Provide day-to-day leadership and coaching to a Technologist and contribute to team capability development. CANDIDATE PROFILE Degree in Food Science or related discipline Relevant product development experience in sauces, dressings, condiments, or similar. B2B and QSR experience essential. Strong understanding of the development process, including factory trials and scale-up. Commercially aware, able to link technical decisions to cost and business impact. Effective cross-functional collaborator with strong project management skills. Team management experience is an asset, or experience leading through influence. Confident, proactive, detail-oriented, and able to perform under pressure. Agencies: McCormick as needed will work with external recruitment vendors through our Agency Portal. Unless previously contacted, McCormick does not accept unsolicited resumes from external recruiting agencies. McCormick & Company is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, colour, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As users of the disability confident scheme, we guarantee to interview all disabled applicants who meet the minimum criteria for the vacancy/ies. TPBN1_UKTJ

Description Job Description: • This position manages large NPI (New Product Introduction) or product deletion projects to ensure aftermarket growth and deliverables are on time, within budget, and aligned with the product strategy., • You will positively impact existing processes and develop new repair options that drive parts sales, leading and influencing major initiatives to set direction for parts growth., • Throughout the Lifecycle you will have responsibility for your Product group on parts branding, intellectual property, supplier agreements, design change, service, repair and overhaul., • You will support the business cases and development of innovative aftermarket parts and service solutions utilising industry knowledge and expertise to drive to successful market launch., • This individual will be responsible for creating total ownership cost models and producing revenue improvement analysis., • You will implement new or improve existing solutions and processes, using key metrics to drive parts revenue and percentage of parts sales (POPS) growth., • Responsible for managing complex global cross-divisional projects to maximize the harvest opportunity to retain customers ‘in-channel’ through the life of the product., • You will work with all levels of management to identify and implement continuous improvement processes with measurable results., • This individual will have responsibility in ensuring the service level for all parts is set correctly and reviewed to ensure maximum parts growth., • You will have extensive knowledge, recognition and expertise to positively influence and educate all levels from product launch and through the entire product Life Cycle., • You will work with the Engine Design, Product teams and Life Cycle Consultants to ensure Product Design reflects Aftermarket requirements., • You will champion Built in Quality (BIQ) to drive activity to support future Parts growth. Qualifications: The position typically requires a college or university degree or equivalent experience in an Aftermarket environment. Prior supervisory experience is a plus. Must have the ability to learn and do statistical analysis and have basic computer skills. Skills and experience: • Ability to lead by influence and communicate at all levels of the organisation., • Extensive knowledge of NPI, Product deletion, brand, design change, aftermarket systems, processes, service, repair and overhaul solutions, • Self-starter with excellent time management, organisation, prioritisation and change management skills., • You will have extensive Life Cycle Product Management experience gained in an Aftermarket Spare Parts and/or service environment., • Some knowledge of parts marketing and sales functionality would be advantageous., • You will have excellent project management skills, able to work across functions such as Product Development, Engineering, Quality, Supply chain, Manufacturing, Aftermarket, and Operations., • Applicants must be able to cultivate an extensive knowledge of company products, aftermarket systems, processes, service and repair and overhaul solutions. Skills aftermarket lifecycle automotive engineer Employee Value Proposition fully onsite Job Title: Lifecycle Consultant Location: Peterborough, UK Rate/Salary: 35.00 - 37.00 GBP Hourly Job Type: Contract Trading as Aston Carter. Allegis Group Limited, Maxis 2, Western Road, Bracknell, RG12 1RT, United Kingdom. No. (phone number removed). Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. Aston Carter is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at (url removed)> To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go to (url removed)> We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice at (url removed)/en-gb/privacy-notices for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. If you are resident in the UK, EEA or Switzerland, we will process any access request you make in accordance with our commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield

Quality Lead Location: Within the East Anglia area to include: Lincoln, Peterborough, Huntingdon, Northampton, Milton Keynes, Norfolk and Colchester Contract: Permanent/Full time Salary: circa £50,000 & Car Allowance* At Anglian Water our values are that together, we will: Build trust, do the right thing, and we are always exploring. Who are we? Here within Anglian Water, we collaborate with a number of alliance partners to provide the best water and water recycling services across the region by maintaining our existing assets and undertaking new projects to safeguard future water supplies. Playing a key part in our drive to bring environmental and social prosperity to the region we serve through our commitment to Love Every Drop are our Integrated Operational Solutions (IOS) Alliance. Comprising of Anglian Water, Morrison Utility Services, Barhale and Kier, the IOS Alliance work together to concentrate on solutions across the water recycling and clean water asset base. What will you be doing as our new Quality Lead? This is an extremely exciting support the development of a new vision for Integrated Operational Solutions (IOS), where a heavy focus on Quality and Assurance will be critical to IOS's Success. IOS consists of a team of experts from Anglian Water, and external Partners who collaboratively work together to deliver optimal solutions for Anglina Water. As we move into AMP8 IOS will support the delivery of Anglian Water's most ambitious capital programme yet, where the volume and complete of work will increase. Therefore, to support this programme IOS must have a clear quality and assurance strategy to meet these challenges. Reporting to the Quality & Assurance Manager the Quality Lead plays a vital role in assuring the quality of work undertaken across IOS, from project inception to asset delivery and handover. The role is key to providing the Senior Leadership Team with analysis of work carried out and creating salient reports to show where work doesn't meet the standard expected enabling IOS to improve the quality of work carried out and reduce the need to revisit future defects, improving customer and stakeholder confidence. A little bit about your skills, experience and behaviours Experience of working in a construction environment & water industry Lead Auditor and detailed knowledge of ISO9001 Ensure that products built off-site are delivered to the required design and standard by carrying out pre-delivery quality inspections and witness testing as identified in the project plan. Ensure that our delivery processes comply with the clients internal and external standards and that the product quality is suitable to serve the requirements of client Escalate concerns and agree remedial actions with the project delivery teams. Support the Site Manager in carrying out specific quality checks and witness testing pre/during/post critical on-site activities as identified in the project plan. Ensure that final operational approval of Safe to Operate is secured through early identification and resolution of operability, safe to operate and quality risks that could delay DM4. Ensure the m2i rework list content is up to date, monitor corrective actions and ensure they are closed out. Ensure data is submitted on a monthly basis and delivery documentation completed promptly to enable project close out. Support where directed the work of the Assurance Leads in Impact Planning, Operational Assurance & liaison and Safe to Operate. Support the Water Quality Compliance Manager wherever and whenever directed to by them and the Quality & Assurance Manager. Why Anglian Water? At Anglian Water, our people are at the heart of everything we do, and we ensure their hard work is recognised and rewarded. Some of our benefits include: Bonus scheme Private healthcare Competitive pension scheme Up to 26 days annual leave, increasing with length of service Flexible benefits to support your wellbeing EAP scheme Car Allowance* (* criteria is >9000 business miles p.a.) Inclusion is for everyone and we are an equal opportunity employer, which means we'll consider all suitably qualified applicants regardless of gender identity or expression, ethnic origin, nationality, religion or beliefs, age, sexual orientation, disability status or any other protected characteristic. We recruit and develop our people based on merit and their passion for creating better outcomes, and we're committed to creating an environment where all our colleagues feel they belong. If you feel this role is your next move within the industry and you display these skill sets and attributes, then please apply today. Closing date: 29th May 2026 #loveeverydrop TPBN1_UKTJ

Design Manager - Water (PFAS) - AMP8 Location: East of England (hybrid working) Working Pattern: 3 days per week on site for first 3 months, reducing to approx. 2-3 days per fortnight based on performance Type: Permanent preferred | Contract considered Lead the design of a flagship AMP8 portfolio tackling PFAS ('forever chemicals') removal across multiple Water Treatment Works. This is a high-impact leadership role managing a multidisciplinary team delivering complex treatment solutions centred on two-stage Granular Activated Carbon (GAC) systems, with a combined portfolio value of approximately £155m. You will lead design excellence, innovation and sustainable engineering outcomes across projects spanning Grimsby to Colchester, helping protect water quality and the natural environment for future generations. The Role As Design Manager, you will lead a team of 15-20 engineers delivering detailed design solutions across a portfolio of PFAS treatment projects. Working collaboratively across project management, construction and supply chain partners, you will drive high-quality, safe and cost-effective engineering outcomes aligned with AMP8 priorities. Key Responsibilities Design Leadership Lead multidisciplinary design delivery across water treatment capital projects Develop and manage Engineering Project Plans covering scope, programme, cost, risk and resources Direct Process, Mechanical, Electrical and Civil engineering design activities Ensure design quality processes support a right-first-time approach Coordinate supplier and subcontractor design integration Support optioneering and solution development activities Project Delivery Collaborate across integrated project teams to deliver joined-up project outcomes Drive affordability, programme certainty and value engineering Embed sustainability and carbon reduction principles into designs Identify and manage risks, opportunities and design improvements Ensure stakeholder engagement and design acceptance Health & Safety (CDM) Support delegated Principal Designer duties under CDM Regulations Ensure design risk assessments, pre-construction information and H&S files are produced Promote a strong safety culture across engineering teams Team Leadership & Development Lead, mentor and develop a multidisciplinary engineering team Identify capability gaps and support recruitment and resource planning Foster an inclusive, collaborative and high-performing team environment Innovation & Transformation Promote digital engineering and fully attributed 3D modelling Support product standardisation and design innovation Drive continuous improvement in engineering efficiency and sustainability About You Qualifications & Experience Degree-qualified in Engineering or related discipline Chartered Engineer status (or working towards) Experience delivering design for water or infrastructure capital projects Experience leading multidisciplinary design teams Experience working within Design & Build environments beneficial Understanding of CDM designer responsibilities Benefits (Permanent option) Employer pension contribution Potential company car or car allowance (partner dependent) Structured salary progression within banding Long-term AMP8 programme visibility Flexible hybrid working arrangement after initial onboarding period Apply now to secure a key role delivering critical water treatment infrastructure and environmental improvements

Aftermarket Project Manager – Diesel Engines Peterborough (Site based) Initial 12 Month Contract – likely to be extended 37 Hours a week Monday – Friday Up to £33.95p/h PAYE plus holiday and pension contribution OR up to £46.08p/h Umbrella Are you an experienced in driving initiatives to support parts and service growth through product lifecycle for Aftermarket? Do you have technical awareness of diesel engines? Are you experienced in managing projects? If so, this is a great opportunity to help drive processes to protect and improve aftermarket parts and legacy with focus on the New Product Introduction phase. What the Aftermarket Project Manager will do: • Lead the aftermarket deliverables within large NPI (New Product Introduction) or product deletion projects to ensure aftermarket growth and manage tasks to be on time, within budget, and aligned with the product strategy, • Positively impact existing processes and develop new repair options that drive parts sales, leading and influencing major initiatives to set direction for parts growth, • Throughout the Lifecycle have responsibility for optimising parts branding, intellectual property, supplier agreements, design change, service, repair and overhaul, • Support the business cases and development of innovative aftermarket parts and service solutions utilising industry knowledge and expertise to drive to successful market launch, • Implement new or improve existing solutions and processes, using key metrics to drive parts revenue and percentage of parts sales (POPS) growth, • Work with all levels of management to identify and implement continuous improvement processes with measurable results, • Have responsibility in ensuring the service level for all parts is set correctly and reviewed to ensure maximum parts growth, • Have extensive knowledge, recognition and expertise to positively influence and educate all levels from product launch and through the entire product Life Cycle., • Work with the Engine Design, Product teams and Life Cycle Consultants to ensure Product Design reflects Aftermarket requirements What the Aftermarket Project Manager Will Need: • Ability to lead by influence and communicate at all levels of the organisation, • Extensive knowledge of NPI, Product deletion, brand, design change, aftermarket systems, processes, service, repair, and overhaul solutions, • Self-starter with excellent time management, organisation, prioritisation, and change management skills, • Some knowledge of parts marketing and sales functionality would be advantageous, • You will have excellent project management skills, able to work across functions such as Product Development, Engineering, Quality, Supply chain, Manufacturing, and Operations, • Must be able to complete analysis and provide direction using complex data sets, • Must have the ability to read and understand engineering drawings utilising Teamcenter or equivalent engineering systems To apply, please submit a copy of your up to date CV clearly indicating your relevant experience. Applicants must have an existing right to work in the UK and evidence of eligibility will be required. Suitable candidates will be contacted. The above represents a summary of the contract assignment. A full description of this contract assignment is available. A full explanation of this rate and all deductions will be explained in a key information document (KID) supplied to registered candidates

Project Manager Project Manager / Lifecycle Project Consultant This would also suit a programme manager, project development specialist or specialist in developing markets within the long term project lifecycle & aftermarket services This role Would Not Suit IT Project Managers, it requires some form of Mechanical Engineering expertise Peterborough, Fully Office Based in Peterborough 5 days pw £42 - £44 ph FCSA Umbrella (This role is deemed inside IR35) £30 - £32 paye Are you a Project Engineer / Manager with experience in aftermarket products? Do you have a proven background of managing projects developing aftermarket opportunities within an engineering or similar high value industry? Are you looking to work with a very well known, well-respected & innovative company? If so, please read on. This Advert has been deliberately been kept brief to encourage applications from inquisitive project managers keen to explore more about a company with current exciting growth & potential for more growth in the immediate future. We are currently recruiting for our Peterborough based client Candidates should have experience and knowledge of the following: Previous knowledge of planning, managing and delivering development of opportunities post manufacturing & service, through life/legacy project development or technology projects involving repair & service of discrete and complex products and sub-components. Previous experience within either automotive, aerospace or defence manufacturing (essential) Able to demonstrate and ability to conduct market & customer research, identify new opportunities & deliver products, training & services Review existing aftermarket processes/procedures & identify modern solutions that makes support to our customers much more efficient. Prepare & issue internal business cases that highlight the benefits of proceeding with the new products/services. Deliver project or bid to agreed time, cost and quality parameters. A sound commercial and financial understanding is required. Good customer skills and an ability to work and communicate with people at all levels in the organisation. Ability to work in/with a multi-disciplined team.Experience Ability to lead by influence and communicate at all levels of the organisation. Extensive knowledge of NPI, Product deletion, brand, design change, aftermarket systems, processes, service, repair, and overhaul solutions. This experience may come from Manufacturing Engineering, Process Engineering or NPI Quality Engineering Self-starter with excellent time management, organisation, prioritisation, and change management skills. Some knowledge of parts marketing and sales functionality would be advantageous. You will have excellent project management skills, able to work across functions such as Product Development, Engineering, Quality, Supply chain, Manufacturing, and Operations. Must be able to complete analysis and provide direction using complex data sets. Must have the ability to read and understand engineering drawings utilising Teamcenter or equivalent engineering systems. Knowledge of Lean Manufacture, Supplier development, Understanding of DFMEA, PFMEA, Minimum of 2-3 years of experience in a similar role. Self-motivated individual who can take the initiative to complete tasks Past success in technical troubleshooting Detail oriented with strong organizational skills Good problem-solving abilities using systemic, logical, and sequential approaches Knowledge of and experience with ISO requirements We currently have a definite timeline in place with this company and will be able to offer relevant feedback & have pre – agreed interview slots. £37 - £39 FCSA Umbrella (This role is deemed inside IR35,. Paye also available If you feel you could fit the bill for this company, then please apply for further details. Please apply with your CV in WORD format

Lead Software Engineer Photocentric Ltd, based in Peterborough, Cambridgeshire and the USA, is an award-winning innovator in 3D printing. We have invented a patented new method of 3D printing that is beginning to disrupt how things are made worldwide. We manufacture our own 3D printers and resins in Peterborough and export globally. Join Photocentric and help take our 3D printer to the next level. We are seeking a Lead Software Engineer to enhance our system capabilities and support the evolution of additive manufacturing into next-generation mass manufacturing solutions. Key Responsibilities as Lead Software Engineer include: Work within a small, collaborative engineering team and alongside other R&D teams to deliver bespoke software solutions for advanced manufacturing systems. Design, build, and maintain frontend and backend software supporting new and existing 3D printing solutions. Develop and enhance bespoke 3D printer control software. Work directly with hardware and equipment to diagnose issues and resolve system-level problems. Translate business and product requirements into technical solutions and support software release planning and delivery. Produce and maintain technical documentation, including software release notes. Contribute to software architecture, code quality, and development processes. Carrying out coding Identify, coordinate, and manage outsourced software development where appropriate. Lead a small team Required Skills and Experience of our Lead Software Engineer: Full-stack software development experience. Strong proficiency in JavaScript / TypeScript, including Angular for frontend development. TypeScript backend development, using NestJS or similar frameworks. Experience designing and consuming RESTful APIs. Experience developing software that operates or interfaces with hardware. Familiarity with event-driven architectures. Experience with database design and implementation. Strong debugging, problem-solving, and code design skills. Experience working with Linux-based systems, including Raspberry Pi (RPI) or similar platforms. Ability to adapt to existing systems and workflows, contribute to team development practices, and suggest improvements to efficiency and code quality. Clear and effective communication skills with team members and stakeholders. Non-Essential but Useful: C++ and/or Python (used within parts of our system). Embedded software development (some embedded layers are written in C++ and Python). Experience working in mixed-language codebases. Awareness of UI/UX design considerations for user-facing tools. What We Offer: Competitive salary. Higher-contribution pension. Minimum 24 days holiday entitlement. Onsite role but could offer hybrid working Free onsite vehicle charging. Free access to our on-premises gym. Access to state-of-the-art 3D printing and prototyping facilities. A friendly team with a strong social culture. If you're excited by the idea of manufacturing in orbit and want to be part of a project that's changing how things are made in space and become our Lead Software Engineer , please click ‘apply' now! We'd love to hear from you. TPBN1_UKTJ

NPD Concept Technologist - Food manufacturing Peterborough 12 month FTC | Mon-fri £30,000 - £33,000 d.o.e If you're passionate about food trends, consumer insight and turning bold ideas into commercial success, this is your opportunity to sit at the heart of innovation. What you'll be doing as the NPD Concept Technologist: Be the category expert, building deep knowledge of the products and adjacent categories, tracking competitor activity and retailer benchmarks to fuel true innovation. Create and deliver standout concepts, developing new products aligned to pipeline and critical paths, blending creativity with commercial realism. Lead insight-led ideation, translating trends, market intelligence and customer briefs into exciting branded and own-label propositions. Own customer collaboration, building trusted relationships with strategic partners and confidently presenting concepts both on-site and in customer forums. Work cross-functionally with Buying, Technical, Packaging and Factory teams to source new ingredients, formats and feasible solutions. Take concepts from kitchen to factory, ensuring smooth handover to Process teams with robust documentation, samples and trial readiness. Support launches end-to-end, from kitchen development through pre-production, first runs and post-launch reviews. Champion continuous improvement, challenging ways of working and driving evolution of the Concept NPD process to keep innovation sharp and competitive. What you'll need as the NPD Concept Technologist: Experience within a new product development role or a relevant degree is required Own transport Full UK working rights - no sponsorship or visas available If you believe you have the skills and personality to fit these requirements please either apply via this advert or call Henderson Brown on (phone number removed) for more information

Evolve are recruiting for leading Ophthalmology company who are seeking a Key Account Manager to join their team. You’ll manage our client’s glaucoma pharmaceutical business, driving sales, promotion, and education of the product portfolio. Alongside this, you will build and nurture strong relationships with key customers, positioning our client as a trusted partner and leading presence in the glaucoma and dry eye market. This is a full-time position working across the Lincolnshire, Peterborough, Cambridge & Norfolk territory. What’s on offer? Excellent Salary & Benefits: A competitive starting salary, along with an exceptional bonus, company car or allowance, private healthcare, Death in service, pension and more! Innovative Product Portfolio: Work with a leading Ophthalmic product range in a specialist market. Stronger Voice - Put your ideas into shaping products, strategy, and company culture. Connected Team Culture - Enjoy a more personal, supportive, and collaborative work environment. Ideal Requirements for the Key Account Manager * ABPI Qualified Professional – Bring your recognised industry accreditation and expertise to a role where you can truly make an impact. * NHS & Secondary Care Sales Pro – Experienced in healthcare sales with a genuine passion for ophthalmology and improving patient outcomes. * Proven Sales Achiever – A strong track record of exceeding targets and driving business growth in a competitive market. * Master of Influence – Exceptional selling, negotiation, and networking skills that build lasting partnerships and open new opportunities. * Strategic Account Manager – Skilled at taking a territory management approach, developing tailored plans to maximise results and customer satisfaction. * Compelling Communicator – Confident, polished, and persuasive with excellent presentation skills to engage stakeholders at every level. Role Responsibilities for the Key Account Manager * Build Powerful Partnerships – Develop and nurture strong relationships with key customers across both the NHS and private sector, becoming a trusted partner in delivering outstanding healthcare solutions. * Drive Impactful Conversations – Lead engaging, strategic, and sometimes challenging discussions that move account objectives forward and strengthen long-term collaboration. * Map the Key Players – Create a clear and effective stakeholder map, identifying decision-makers, influencers, and access champions to maximise opportunities. * Own Your Territory – Take charge of your area with a strategic business plan that drives growth, manages resources, and delivers measurable results. * Leverage Data for Success – Maintain accurate, up-to-date customer records and use this valuable insight to inform planning, reporting, and smarter decision-making. Recruitment Process 2 stage interview process. Connect with a hiring manager and team who are committed to guiding your career and helping you make an impact. Excited to learn more? Click apply or reach out to Katie Fisher on (phone number removed) for full details! Evolve is a leading recruitment and outsourcing organisation, operating within the Pharmaceutical, Healthcare, Medical Device and Life Science sectors. Equal opportunities are important to us. We believe that diversity and inclusion are critical to our success as a company, We encourage applications from everyone, regardless of background, gender identity, sexual orientation, disability status, ethnicity, belief, age, family or parental status, and any other characteristic

VP Engineering and Lead Product Designer, where the big strategic decisions are made together. Senior or Lead Product Manager. Lead Product Manager (growth path to CPO).

Maybe you're a Product Manager, Sportsbook Product Manager, Product Owner, Trading Analyst, or Betting Product Specialist, and know you’d flourish in an environment with the freedom to innovate, test, and prove ideas without constraint. Product Lead – Sports Betting (Football Focus). This is a r

We are working with a Tier 1 banking client seeking an experienced Product Engineering Lead to join a high-impact technology function responsible for delivering and supporting critical enterprise platforms. This is a key leadership role within a global engineering xsrmqjs organisation, focused on dr

Benefits:22 days rising after 2 years, Holiday buy-back scheme, Pension, Growth by sharing bonus scheme, on-site parking, Modern open plan offices, Free lunch every Friday, Company sick pay, Company social and corporate events, monthly + annual bonus xsrmqjs structure, training provided.Have you got

Lead Product DesignerA growing consumer products company is seeking a Lead Product Designer to take ownership of a portfolio of products within its New Product Development function. This is a senior, hands-on role responsible for leading projects from early concept throu

A leading financial services firm seeks a Product Security Lead in London to work within its Cybersecurity & Technology Controls team. The successful candidate will enhance the security culture across product teams, manage risk effectively, and serve as a key expert in security issues, utilizing str

Leading cross‑functional collaboration; working closely with engineers, product managers, delivery leads and stakeholders to balance user needs with technical feasibility and strategic client goals. Portfolio of impactful work demonstrating ability to lead the end‑to‑end design process—deriv