Trabajos compliance testing en MiddlesbroughCrear alertas

Inspector (CAT 3) Pressure Equipment \n \n \n TÜV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of ...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Storage Tank Inspector \n Full Time Permanent Position \n \n \n \nTÜV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly br...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

TÜV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle.

TÜV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle.

Quality Engineer Permanent Opportunity Aerospace / Production / Manufacturing Gloucester The Role - Quality Engineer We are currently seeking an experienced Quality Engineer to join our client's team at their state-of-the-art facility based in Gloucester on a permanent basis. Our client manufacture composite engineering products for global application in the Aerospace, Space, Defence and Motorsport sectors. This is an all-round quality engineering position with ownership of the Quality Management System, supplier quality and corrective action planning all included. You'll need to be comfortable in a rapidly evolving business which scaling quickly. Duties - Quality Engineer Develop, implement and maintain procedures that ensure quality standardisation. Undertake root cause analysis and implement corrective actions Recommend improvements that reduce defects, raise quality and increase efficiency. Maintain inspection, audit, test and corrective action records (including FAIR and ISIR) Run internal audits against quality standards and regulatory requirements. Work with suppliers so materials and components meet standards Train production staff on quality standards, tools and techniques. Work with engineering to feed quality learnings back into product development. Analyse defect rates, returns and other quality data. Background - Quality Engineer Experience in general root cause analysis & Six Sigma Experience of working with AS9100 QMS Knowledge and practical experience with FMEA. Hands on experience with quality testing & inspection tools. Effective communication internally and externally. Strong analytical and problem-solving skills. Omega For more information about this role, please contact Lee Powell on 01453 829530 or send a copy of your CV to Candidates who are currently a Quality Engineer, Quality Assurance Engineer, Supplier Quality Engineer, Quality Lead, Senior Quality Engineer, QA Engineer, Quality compliance Engineer or Quality Manager may be suitable. For details of other opportunities available within your chosen field please visit our website Omega is acting as an Employment Agency in relation to this vacancy. Omega does not charge candidates any recruitment or job-seeking fees at any stage of the hiring process. TPBN1_UKTJ

We are looking for an SAP P2P Architect – Billingham -UK (onsite)– Contract for the below role. The P2P Architect ensures UK procurement processes align with the global template and statutory requirements including VAT, vendor onboarding, P flows, GR/IR, and invoice automating. • Validate UK procurement processes including vendor onboarding, P, GR/IR., • Ensure VAT compliance and statutory reporting alignment., • Collaborate with offshore teams for configuration and testing., • Support SIT/UAT cycles and defect resolution., • Drive cutover readiness including pen P migration., • Ensure alignment with Client architecture., • 15+ years f SAP P2P/MM experience., • Strong understanding f UK VAT and procurement compliance., • Experience with invoice automating and vendor management., • Strong documentations and saluting design skills., • Experience in S/4HANA Procurement., • Exposure to Ariba, Coupa r third party procurement tools. #J-18808-Ljbffr

An exciting opportunity has arisen for a Payload Product Assurance Engineer to play a key role in ensuring the quality, reliability and compliance of advanced space payload products throughout their lifecycle. Working closely with Engineering, Manufacturing, Supply Chain and Programme teams, you will support the delivery of high-quality RF and microwave hardware for demanding Space and Defence applications. • Lead product assurance activities across payload and space hardware programmes from concept through to customer delivery., • Ensure compliance with customer, regulatory and industry standards, including ECSS, ESA and NASA requirements., • Work with Engineering, Manufacturing and Test teams to embed quality throughout the product lifecycle., • Support the selection and qualification of space-grade electronic components and materials., • Review and approve quality plans, manufacturing documentation, non-conformance reports and release documentation., • Lead root cause investigations, corrective actions and Non-Conformance Review Boards (NRBs)., • Participate in design reviews, manufacturing readiness reviews, customer reviews and programme gate reviews., • Monitor quality metrics, process capability and continuous improvement activities., • Maintain robust configuration control, traceability and product documentation., • Support supplier quality and material/process compliance activities., • Degree or equivalent experience in Engineering, Manufacturing, Physics, Quality or a related discipline., • Experience in Product Assurance, Quality Assurance, Manufacturing Quality or Reliability Engineering., • Experience working with complex electronic, RF, aerospace, defence or space products., • Strong understanding of quality management systems, non-conformance management and root cause analysis., • Knowledge of space-grade electronic components, PCB manufacturing and aerospace soldering standards., • Familiarity with ECSS, ESA or NASA quality standards., • Excellent communication skills with the ability to work effectively across multidisciplinary teams., • Experience supporting satellite, payload or wider space programmes., • Knowledge of AS9100 and ISO 9001 quality systems., • Experience with configuration management, FMEA, risk management, qualification or acceptance testing., • Experience supporting supplier or customer audits., • Competitive salary depending on experience., • 37.5 hour working week., • 25 days' holiday plus public holidays, with the option to buy up to 5 additional days., • Contributory pension scheme with up to 8% company contribution., • Life Assurance., • Income Protection Insurance., • SAYE share scheme., • Electric Vehicle (EV) scheme., • Cycle to Work scheme., • Volunteering day., • Learning and development opportunities., • Opportunity to work on cutting-edge Space and Defence programmes within a collaborative engineering environment., • Excellent opportunities for professional development and career progression. Applicants must already have the right to work in the UK. Unfortunately, visa sponsorship is not available for this role. The successful candidate must satisfy UK Security Clearance requirements. #J-18808-Ljbffr

This role is based at our head office at NETPark in Sedgefield TS21 3FR. Skilled Worker Visa support and Relocation assistance is available, if required. Filtronic is looking for a Mechanical Design Engineer to join our engineering team to work on a range of exciting RF and microwave products from concept through to volume production. With experienced engineers, advanced design tools and in-house RF/mmWave manufacturing capability, you will be able to develop your skills and experience designing high-frequency products as part of the Filtronic team. Our products range from low volume niche opportunity devices to high volume telecommunications, aerospace, defence and space-related applications. To provide end-to-end mechanical engineering support and leadership for advanced high-frequency RF systems, modules and amplifiers, ensuring that mechanical performance, thermal efficiency, reliability, manufacturability, quality and cost requirements are achieved. The role will involve the design of mechanically robust, lightweight and thermally efficient assemblies for demanding industrial, payload and high-reliability environments, including space-related applications. • Design precision mechanical components and assemblies for RF modules and systems, including lightweight structural enclosures, heatsinks, liquid cooling solutions and waveguide-based architectures., • Develop modular mechanical architectures suitable for integration into larger payload or system-level assemblies, considering mass, volume, mounting interfaces and serviceability., • Ensure designs meet RF, thermal, mechanical and environmental requirements, including EMI shielding, structural stiffness, tolerance control, CTE compatibility, vibration, shock and ingress protection., • Create detailed 3D CAD models and engineering drawings using SolidWorks., • Select appropriate materials, finishes and manufacturing processes to support product performance, reliability and manufacturability. Thermal and Structural Analysis • Perform thermal analysis and simulation, including CFD and conjugate heat transfer, to validate cooling strategies for high-power RF amplifiers and electronic assemblies., • Conduct structural and dynamic analysis using FEA for vibration, shock, fatigue and other load-case conditions typical of high-reliability payload deployment., • Review mechanical properties of parts and assemblies, including thermal performance, mechanical stress and environmental robustness., • Validate simulation models through physical testing and correlation with measured data. RF-Aware Mechanical Engineering • Work closely with RF, electronics and systems engineers to optimise mechanical features that influence RF performance, including cavity geometry, surface finish, plating, tolerances and material selection., • Design mechanical solutions with consideration for waveguide structures, micro-machined geometry, PCB integration and precision alignment., • Support electromechanical product concept design in collaboration with RF, electronics and PCB design teams. Manufacturing Support • Develop designs for manufacturability, assembly and cost reduction using processes including CNC machining, die-casting, additive manufacturing and sheet metal manufacture., • Generate manufacturing documentation including bills of materials, GD&T drawings and assembly instructions., • Manage and control engineering drawings and documentation in accordance with Drawing Office standards and company processes., • Support suppliers and production teams during prototype build, first article approval and continuous improvement activity., • Contribute to design reviews as part of the company’s ISO and NPI processes., • Support engineering change activity through ECN/ECO processes. Prototyping and Testing • Support the build and test of mechanical prototypes and development hardware., • Support environmental and reliability testing including thermal cycling, humidity, vibration, thermal shock and drop testing., • Work with test and process engineering to develop production hardware, jigs and fixtures to optimise build and test efficiency., • Provide technical support to internal stakeholders, customers and external partners throughout the product lifecycle. Skills, Experience and Qualifications • Degree or equivalent qualification in Mechanical Engineering., • Strong 2D and 3D CAD skills, with SolidWorks preferred., • Experience designing high-precision mechanical assemblies, ideally for constrained, high-reliability or technically demanding environments., • Understanding of PCB integration, RF shielding and EMI/EMC considerations., • Strong understanding of materials and manufacturing processes, preferably including CNC machining of aluminium alloys and lightweight structures., • Excellent understanding of GD&T and engineering drawing standards., • Experience developing drawings for machined, cast, moulded, punched or sheet metal parts., • Ability to work effectively within cross-functional engineering teams., • Experience with PDM/PLM systems and engineering change processes., • Must be a highly motivated individual able to interface effective with internal and external customers. Desirable Skills and Experience • Experience with payload systems or deployment environments such as space, aerospace, defence or telecoms infrastructure., • Experience with industrial system design., • Hands-on experience with FEA and thermal simulation tools, preferably SolidWorks Simulation or SolidWorks Flow., • Familiarity with RF/mmWave product development, including waveguides, filters, amplifiers and high-frequency assemblies., • Knowledge of lightweighting techniques and structural optimisation for mass-constrained designs., • Experience with high-reliability and qualification-driven design standards such as MIL-STD or ECSS., • Familiarity with environmental testing such as thermal vacuum or vibration qualification., • Knowledge of RoHS and WEEE compliance., • Experience supporting supplier development, first article inspection or production readiness activity., • Strong problem-solving ability with excellent attention to detail., • Positive, proactive and hands-on approach., • Ability to manage multiple projects and priorities in parallel., • Clear and effective communicator across multidisciplinary teams, suppliers and customers., • Self-motivated, adaptable and eager to learn new tools, processes and technologies., • Team player with a strong customer focus. The successful candidate must meet the criteria for UK Government Security Clearance vetting. • Salary benchmarked to attract the strongest candidates., • 37.5 hour working week, • 25 days’ holiday plus public holidays, with the option to buy up to 5 additional days, • Contributory pension scheme with up to 8% company contribution, • Life Assurance, • Income Protection Insurance, • Save As You Earn (SAYE) share scheme, • Electric Vehicle (EV) scheme, • Cycle to Work scheme, • Volunteering day, • Learning and development opportunities We are always happy to answer any questions you may have about the role, what we do, our culture or what it is like to work at Filtronic. At Filtronic, we believe diverse perspectives drive innovation. We’re committed to creating an inclusive workplace where everyone is treated with respect and has the opportunity to succeed. We welcome applications from all suitably qualified candidates regardless of age, disability, gender reassignment, marriage or civil partnership, pregnancy and maternity, race, religion or belief, sex or sexual orientation. If you require any reasonable adjustments during the recruitment process, please let us know. We’ll be happy to support you throughout your application journey. #J-18808-Ljbffr

TÜV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle.

Application Deadline: 19 November 2026 Department: Power & Renewables Employment Type: Permanent - Full Time Location: Stockton on Tees Reporting To: Asset Support Team E&M Manager px PEOPLE, their commitment to excellence, innovation and teamwork, are the reason for px Group’s continuing growth and success story. We aim to be the elite provider of operations management, engineering services and energy management solutions in high hazard, highly regulated industries nationally and as we grow, across Europe and globally. For more information visit www.pxlimited.com Our Head Office is based in Stockton-on-Tees and is home to our administrative support teams, engineering & maintenance support team & energy services teams. The Offices are located on the river Tees with close access to walks, shops and restaurants. We are now recruiting for a Senior Mechanical Engineer. The Senior Mechanical Engineer is a key role for the safe, reliable and compliant operations, through effective delivery of all mechanical systems and associated equipment across stipulated px operated sites within the UK and Europe. Effectively ensuring Compliance, safety, integrity, reliability and commercial considerations. You’ll be supported with personalised on the job training, coaching, mentoring and twice-yearly development and performance reviews to help maintain & develop your contributions and competence. The team support our sites both remotely and physically and there is frequent travel to the following places: Stallingborough CHP, WELP, Energy Works Hull & TeesRep Biomass Plant You may also be asked to do both long and short term secondments in the above places. • Lead mechanical engineering support across UK and European sites, ensuring asset integrity, reliability, statutory compliance, and continuous improvement., • Develop and implement mechanical engineering strategies, systems, and processes to achieve safe, compliant, and efficient operational performance., • Provide technical guidance for shutdowns, projects, modifications, maintenance activities, and planned/unplanned operational events., • Manage engineering projects and change initiatives, ensuring compliance with project management and Management of Change (MoC) requirements., • Drive safety, audit, and compliance activities, including investigations, risk reviews (HAZOP, LOPA, RBI), and safe working standards., • Support business growth and operational excellence through mentoring, technical leadership, stakeholder engagement, continuous improvement initiatives, and specialist authorisation responsibilities (e.g., radiography, pressure testing, and excavations)., • Degree in Mechanical Engineering (or equivalent) with experience in process, fuel terminal, refinery, or power generation environments., • Strong background in maintenance, contract, outage/shutdown management, and operational procedures within a 24/7 operating environment., • Proven ability to deliver compliance, policies, and initiatives across functions while managing relationships with customers, contractors, and stakeholders., • Experience managing projects, budgets, KPIs, and developing business cases for capital and revenue investment., • Knowledge of SHE and quality systems, maintenance management, process safety (HAZOP, LOPA, PSM), functional safety, audits, Management of Change, document control, and regulatory compliance., • 25 days holiday plus bank holidays, • Contribution towards eye test and glasses, • Online company discount benefits site including cinema tickets and gym membership discount, • Long Service Awards, • Employee recognition scheme – ELITE Awards, • Employee Assistance Programme, • Flexible Benefits Package, • Onsite parking We are committed to equality of opportunity for all staff and applications from individuals are encouraged regardless of age, disability, sex, gender reassignment, sexual orientation, pregnancy and maternity, race, religion or belief and marriage and civil partnerships. Please note this role may close early or be extended depending on the volume of applications. #J-18808-Ljbffr

The Electronics Engineer designs, develops and supports state-of-the-art analogue and digital electronic instrumentation for challenging measurement and control applications. Responsible for hardware and firmware development, the role contributes across the entire product lifecycle, from initial concept and design through schematic design, PCB layout, firmware implementation, testing, validation, manufacture and field support. Working with multidisciplinary teams, the Electronics Engineer drives continuous product improvement, resolves complex technical challenges and delivers innovative, reliable instrumentation that meets strict customer, safety, regulatory and business requirements while maintaining the highest standards of quality and performance. • Degree in Electronic Engineering or a related discipline., • Proven experience designing analogue and digital electronic systems including schematic capture and PCB layout and routing., • Hands-on experience developing system architectures utilising 32-bit microcontrollers (e.g., ARM Cortex-M), low-power peripherals, and power management circuits., • Familiarity developing low-level embedded firmware, interfacing peripherals (e.g., ADC) and implementing communication protocols (e.g., SPI, I2C, UART)., • Knowledge of product lifecycle management and design for manufacture., • Awareness of industrial standards and compliance applicable to electronic equipment (e.g., EMC Directive)., • Strong understanding of analogue and digital circuit design, low-level embedded systems, testing and verification techniques., • Knowledge of product development processes, reliability engineering and relevant industry standards and regulatory requirements. Responsibilities/Accountabilities: • Design, develop and validate analogue signal conditioning and digital electronic instrumentation for precision measurement and control applications., • Write, debug and maintain low-level embedded firmware for 32-bit microcontrollers., • Support products throughout the full lifecycle, driving continuous improvement, technical problem-solving and successful product delivery. The Electronics Engineer designs, develops and supports state-of-the-art analogue and digital electronic instrumentation for challenging measurement and control applications. Responsible for hardware and firmware development, the role contributes across the entire product lifecycle, from initial concept and design through schematic design, PCB layout, firmware implementation, testing, validation, manufacture and field support. Working with multidisciplinary teams, the Electronics Engineer drives continuous product improvement, resolves complex technical challenges and delivers innovative, reliable instrumentation that meets strict customer, safety, regulatory and business requirements while maintaining the highest standards of quality and performance. • Degree in Electronic Engineering or a related discipline., • Proven experience designing analogue and digital electronic systems including schematic capture and PCB layout and routing., • Hands-on experience developing system architectures utilising 32-bit microcontrollers (e.g., ARM Cortex-M), low-power peripherals, and power management circuits., • Familiarity developing low-level embedded firmware, interfacing peripherals (e.g., ADC) and implementing communication protocols (e.g., SPI, I2C, UART)., • Knowledge of product lifecycle management and design for manufacture., • Awareness of industrial standards and compliance applicable to electronic equipment (e.g., EMC Directive)., • Strong understanding of analogue and digital circuit design, low-level embedded systems, testing and verification techniques., • Knowledge of product development processes, reliability engineering and relevant industry standards and regulatory requirements. Responsibilities/Accountabilities: • Design, develop and validate analogue signal conditioning and digital electronic instrumentation for precision measurement and control applications., • Write, debug and maintain low-level embedded firmware for 32-bit microcontrollers., • Support products throughout the full lifecycle, driving continuous improvement, technical problem-solving and successful product delivery., • Plan and prioritise engineering activities to meet project milestones, quality standards and business objectives., • Collaborate closely with multidisciplinary teams including mechanical, software, quality and project management to deliver fully integrated, robust products., • Solve complex technical challenges involving electronic hardware, embedded firmware and system integration., • Balance technical performance, cost, manufacturability, reliability and regulatory compliance throughout product development., • Operate with autonomy on assigned tasks, taking ownership of engineering decisions and technical solutions., • Exercise engineering judgement while identifying and escalating significant technical or commercial risks where appropriate., • Build effective working relationships across multidisciplinary engineering and operational teams., • Provide technical guidance and knowledge sharing to colleagues and support the development of junior engineers where required. Billingham (Belasis) Tracerco is a worldleading industrial technology company with over 65 years’ experience. We provide companies all over the world with the insights they need to make informed decisions about their operations. Using innovative technology. We measure the unmeasurable. We access the inaccessible We help solve the impossible. At Tracerco, every individual is valued and respected. We believe attitude is everything, and are committed to developing the ambitious, the curious, the motivated and the talented. We challenge everyone to be the best, explore varied roles and specialize in an area you enjoy and excel in a diverse and flexible career. We strive for excellence and want you to do the same. #J-18808-Ljbffr

We are currently sourcing a Senior Piping Engineer to join our client in Teesside. The candidate will be a Senior Piping Engineer with a substantial, recent and proven track record in onshore oil and gas, LNG, refinery, chemical or petrochemical projects and will be able to demonstrate experience, in a similar and relevant position, of FEED and detail design. Good communication and presentation skills are essential. • To undertake Piping Engineering design work with true regard to Safety and in compliance with national and Client Codes & Standards., • Preparation and checking of:, • Pipeline Fluid Index, • Piping Line Classes, • Piping Specifications, • Valve and Accessories Data Sheets, • Fabrication and Installation Specifications, • Testing Specifications, • Painting Specifications, • External Pipe Coating and Protection Specification #J-18808-Ljbffr

Control Systems Engineer Location: Middlesbrough Permanent Wolviston Management Services are delighted to be supporting our client in the recruitment of an experienced Control Systems Engineer to join their established EC&I engineering team in Middlesbrough. Our client operates within a highly regulated chemical manufacturing environment, where reliable control systems are essential to maintaining safe, efficient and continuous production. This is an excellent opportunity for a hands‑on Control Systems Engineer with strong Siemens PCS7 and S7 PLC experience, combining control system design, fault‑finding and process optimisation with the delivery of capital projects and ongoing plant improvements. As Control Systems Engineer, you will be responsible for developing, maintaining and improving industrial control systems to support safe and efficient manufacturing operations. You will work closely with engineering, maintenance and production teams to troubleshoot complex control system issues, optimise batch manufacturing processes and support the successful delivery of engineering projects. The position also involves contributing to process safety, functional safety and regulatory compliance within a demanding chemical manufacturing environment. Key responsibilities will include: • Designing, developing and maintaining control systems using Siemens PCS7 and S7 PLCs, • Troubleshooting complex control system faults to minimise downtime and maintain production efficiency, • Developing and implementing control strategies for new and existing batch manufacturing processes, • Supporting the delivery of capital projects, including system testing, commissioning and start‑up activities, • Working closely with engineering, maintenance and production teams to improve process control and operational performance, • Providing technical support and guidance to engineers, maintenance technicians and plant operators, • Participating in HAZOP studies, LOPA assessments and process safety reviews, • Developing and maintaining safety‑related control programming in accordance with IEC 61511, • Implementing OT cybersecurity measures in line with IEC 62443, • Managing alarm systems in accordance with IEC 62682 to support effective operator response, • Preparing and maintaining technical documentation, including control narratives, User Requirement Specifications (URS) and Functional Design Specifications (FDS), • Ensuring compliance with COMAH regulations and relevant engineering and safety standards, • Supporting continuous improvement initiatives across control systems and manufacturing operations We are looking for an experienced Control Systems Engineer with a strong background in industrial automation, process control and manufacturing operations, ideally gained within the chemical, petrochemical or similarly regulated process industries. Ideally, you will have: • An HNC, HND, Degree or relevant apprenticeship in Electrical Engineering, Control Systems Engineering, Instrumentation or a related discipline, or equivalent industry experience, • Extensive hands‑on experience with Siemens PCS7 and S7 PLC systems, • Proven experience designing, developing, commissioning and maintaining industrial control systems, • A strong understanding of process control and batch manufacturing operations, • Experience troubleshooting complex automation and control system faults within an operational manufacturing environment, • Good knowledge of COMAH regulations and industrial process safety standards, • An understanding of functional safety, OT cybersecurity and alarm management principles, • Experience contributing to engineering projects, commissioning activities and process improvements, • Strong analytical and problem‑solving skills with sound engineering judgement, • Excellent communication skills and the ability to work effectively with multidisciplinary engineering and production teams, • The ability to work independently, manage competing priorities and deliver practical engineering solutions Experience participating in HAZOP and LOPA studies, preparing technical specifications and supporting control system modifications would be advantageous. This position offers the opportunity to take ownership of control systems engineering activities within an established chemical manufacturing environment, working across plant reliability, process optimisation, functional safety and capital project delivery. The role provides a varied combination of hands‑on technical engineering and project involvement, with the opportunity to contribute directly to the safety, efficiency and ongoing development of manufacturing operations. If you're an experienced Control Systems Engineer looking for your next opportunity within chemical manufacturing, #J-18808-Ljbffr

We are currently recruiting for a EC&I Department Head on behalf of our internationally operating client within the Testing, Inspection & Certification sector. The suitable person must be a graduate Electrical, Control & Instrumentation Engineer, chartered with a minimum of 10 years experience. This role will also be responsible for supporting the commercial function of the business, being comfortable being in front of clients and developing proposals. Key Responsibilities: • Prepare scopes of work and estimates to support proposals., • Assist in preparing project documents including scopes, schedules and reports., • Deliver the EC&I engineering design scope to budgets and programes., • Co-ordinate/liaise with EC&I and other Engineering disciplines/client/package vendors., • Design authority for all EC&I packages., • Prepare, check and/or approve design calculations, specifications, data sheets, reports, scope of work and drawings to British/International Standards and Codes of Practice., • Design, develop, review and approve electrical and controls (IEC) engineering drawings, specifications and documents in line with national and international standards., • Conduct electrical design calculations and approve calculations conducted by others including earthing, cable sizing, Short Circuit Calculation, Cantilever strength calculation, Battery Sizing calculations, voltage drop, lighting levels, cable tray fill and heat tracing etc., • Prepare and review datasheets and/or procurement packages for electrical equipment., • Preparation of key engineering design documents including SLD’s, Schematic Diagrams, Cable Schedules and Layout Plans., • Liaise with vendors, select and oversee purchase of EC&I equipment & components., • Monitor work for compliance to applicable codes, accepted engineering practices and client standards., • Provide specialist design input to 3D models., • Prepare Technical Analysis of proposals provided by equipment manufacturers and contractors., • Interpret vendor and other discipline drawings/information., • Attend and participate in safety reviews, risk reviews, planning reviews, model reviews and constructability reviews., • Manage conflicting priorities among simultaneous projects., • Identify and raise scope changes., • Comply with Company Quality Manager Systems., • Other professional duties as reasonably required. Key Requirements : • Background in Heavy Engineering/Chemical/Petrochemical/Oil & Gas Industries preferred., • Chartered Engineer required, • Minimum of 10 years of EC&I experience, preferably in oil & gas, chemicals and/or other high hazard process industries., • Appropriate Technical Engineering Degree, • Knowledge of regulations, codes, manufacturing standards, and industry standard practices., • Ability to work in a multi-disciplinary team environment., • Ability to allocate work appropriately to design staff and monitor progress to meet project needs., • Ability to work in both design office and operating plant environments., • Comfortable dealing directly with both Clients and Vendors at all levels., • Knowledge of ATEX and equipment for electrically hazardous areas., • Knowledge or experience of Functional Safety, preferably holding a suitable Functional Safety qualification., • Expertise using MS office suite and knowledge of AutoCAD., • Experience in the use of AVEVA E3D., • Experience in the design of HV and LV Power distribution systems, LHV/LV Switchgear Panels and MCC’s., • Experience in Relay Coordination, Load Flow, Short Circuit and Motor start studies., • Exposure to IEC, IEEE, IS, CBIP & ANSI Standards., • Proficiency in AUTOCAD, DIALUX, CG LUX Software.

Application Deadline: 19 November 2026 Department: Power & Renewables Employment Type: Permanent - Full Time Location: Stockton on Tees Reporting To: Asset Support Team E&M Manager px PEOPLE, their commitment to excellence, innovation and teamwork, are the reason for px Group’s continuing growth and success story. We aim to be the elite provider of operations management, engineering services and energy management solutions in high hazard, highly regulated industries nationally and as we grow, across Europe and globally. For more information visit www.pxlimited.com Our Head Office is based in Stockton-on-Tees and is home to our administrative support teams, engineering & maintenance support team & energy services teams. The Offices are located on the river Tees with close access to walks, shops and restaurants. We are now recruiting for a Senior Mechanical Engineer. The Senior Mechanical Engineer is a key role for the safe, reliable and compliant operations, through effective delivery of all mechanical systems and associated equipment across stipulated px operated sites within the UK and Europe. Effectively ensuring Compliance, safety, integrity, reliability and commercial considerations. You’ll be supported with personalised on the job training, coaching, mentoring and twice-yearly development and performance reviews to help maintain & develop your contributions and competence. The team support our sites both remotely and physically and there is frequent travel to the following places: Stallingborough CHP, WELP, Energy Works Hull & TeesRep Biomass Plant You may also be asked to do both long and short term secondments in the above places. • Lead mechanical engineering support across UK and European sites, ensuring asset integrity, reliability, statutory compliance, and continuous improvement., • Develop and implement mechanical engineering strategies, systems, and processes to achieve safe, compliant, and efficient operational performance., • Provide technical guidance for shutdowns, projects, modifications, maintenance activities, and planned/unplanned operational events., • Manage engineering projects and change initiatives, ensuring compliance with project management and Management of Change (MoC) requirements., • Drive safety, audit, and compliance activities, including investigations, risk reviews (HAZOP, LOPA, RBI), and safe working standards., • Support business growth and operational excellence through mentoring, technical leadership, stakeholder engagement, continuous improvement initiatives, and specialist authorisation responsibilities (e.g., radiography, pressure testing, and excavations)., • Degree in Mechanical Engineering (or equivalent) with experience in process, fuel terminal, refinery, or power generation environments., • Strong background in maintenance, contract, outage/shutdown management, and operational procedures within a 24/7 operating environment., • Proven ability to deliver compliance, policies, and initiatives across functions while managing relationships with customers, contractors, and stakeholders., • Experience managing projects, budgets, KPIs, and developing business cases for capital and revenue investment., • Knowledge of SHE and quality systems, maintenance management, process safety (HAZOP, LOPA, PSM), functional safety, audits, Management of Change, document control, and regulatory compliance., • 25 days holiday plus bank holidays, • Contribution towards eye test and glasses, • Online company discount benefits site including cinema tickets and gym membership discount, • Long Service Awards, • Employee recognition scheme – ELITE Awards, • Employee Assistance Programme, • Flexible Benefits Package, • Onsite parking We are committed to equality of opportunity for all staff and applications from individuals are encouraged regardless of age, disability, sex, gender reassignment, sexual orientation, pregnancy and maternity, race, religion or belief and marriage and civil partnerships. Please note this role may close early or be extended depending on the volume of applications. #J-18808-Ljbffr

Job DescriptionStorage Tank Inspector \ N Full Time Permanent Position \ N \n \n \nTÜV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly br...\ N \n \n \n \n \ N \n \n \n \n \ N \n \n \n \n \ N \n \n ZIPC1_UKTJ

We are currently sourcing a Senior Piping Engineer to join our client in Teesside. The candidate will be a Senior Piping Engineer with a substantial, recent and proven track record in onshore oil and gas, LNG, refinery, chemical or petrochemical projects and will be able to demonstrate experience, in a similar and relevant position, of FEED and detail design. Good communication and presentation skills are essential. Core Responsibilities: • To undertake Piping Engineering design work with true regard to Safety and in compliance with national and Client Codes & Standards. Preparation and checking of: • Pipeline Fluid Index • Piping Line Classes • Piping Specifications • Valve and Accessories Data Sheets • Fabrication and Installation Specifications • Testing Specifications • Painting Specifications • External Pipe Coating and Protection Specification By clicking the link above or any third-party link within this posting, you are leaving this site and going to a third-party website where the third-party website's terms and privacy policy apply #J-18808-Ljbffr

We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle.

We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle.

You will carry out fixed wire testing, issue EICRs and support diverse electrical compliance tasks across commercial and industrial sites. Electrician with Inspection & Testing qualifications to join a nationwide project portfolio in the UK.

Seeking an Electrical Technician for compliance testing of domestic properties.

The role of Airfield Safety & Compliance Officer serves as a critical link between operational teams, service partners, and regulatory authorities, ensuring compliance with aviation regulations and promoting a safe working environment.

Knowledge and compliance with Health and Safety regulations.

The start date for this role is 30th November 2026.The shift pattern is a 10 hour rotation across 4 weeks that will include some evening and weekend working.Competitive Salary: Starting at £26,116 rising to £26,738 after 8 months, plus an uncapped monthly commission scheme .Online GP: Access to a

This role necessitates providing direction on compliance with data protection laws, advising on emerging risks, and leading initiatives for data protection compliance.

Customer Service Advisor (Sales Training) Competitive Salary 6% Pension Life Assurance Company Benefits Enniskillen, County Fermanagh Are you looking for a career where you will join a close-knit office, in a dynamic team offering full internal training on sales? Are you looking to join a market-

Recruit4staff are representing a leading food manufacturing and packaging business in their search for a Warehouse FLT Operative to work in Oswestry Job Details: Pay: £34,401 starting salary, rising to £38,631 once signed off as competent in the role Hours of Work: 3 on, 3 off, working 12-hour

If you have hands-on property xsrmqjs compliance experience, enjoy getting the det.

Casual Warehouse Operative Location : Based at Cullompton, Flexibility to support our North Tawton Depot and Heathfield depot.Apply now, read the job details by scrolling down Double check you have the necessary skills before sending an application.Looking for a job that offers you the flexibility t

Our team is dedicated to maintaining high standards of compliance and operational efficiency.

Shifts | Chiller department |30-35 days holiday (pro rata) | 10% in-store discount | Pension scheme Everyone who works at Lidl brings something unique to the table - but we also have a whole lot in common.As a Lidl Warehouse Operative (Chiller), you’ll make sure our stores receive the right stock

Maintaining accurate compliance records and dashboards, so our monthly, quarterly and annual reports give a true picture of how safe our homes are Quality-check safety certification to make sure non-technical details are valid, complete and correct Monitor compliance programmes and due dates, work w

Shifts | Chiller Department | 30-35 days holiday (pro rata) | 10% in-store discount | Pension scheme.Everyone who works at Lidl brings something unique to the table - but we also have a whole lot in common.We’re hard-working, focused and reliable.As a Lidl Warehouse Operative (Chiller), you’ll m

Seeking a fluent Dutch-speaking Customer Service Advisor for a 12-month fixed-term, full-time role.Responsibilities include handling customer inquiries via phone, email, and chat, providing solutions, and maintaining records.The role is primarily remote with occasional office visits.

Monday to Friday | Night Shift.Quest Employment are recruiting for Warehouse Operatives to join a busy team in the ST21 area.If you have warehouse experience and hold LLOP or PPT experience/certification, we want to hear from you!.Loading and unloading vehicles.Moving stock safely around the warehou

Red Recruitment are seeking a motivated and energetic Warehouse Operative (AM shift) to join our dynamic logistics team.In this role, you will be responsible for efficiently handling materials, managing shipments, and maintaining a safe and organized warehouse environment.DutiesPicking items accurat

Lidl Warehouse Operative to pick, pack, and stock products ensuring timely delivery to stores.Role involves working independently, adhering to picking instructions, and managing inventory.

Higher pay rate is achieved by.Higher pay rate is achieved by working overtime or weekends.Night Warehouse Operative - Colnbrook.Position: Full-Time, Temp2Perm.Are you reliable, hands-on, and looking to grow in a fast-paced working environment?.One of The Best Connection's valued clients, a well-est

An exciting new Warehouse Operative opportunity at DX!.This is a Nightshift vacancy***.DX are a market leading provider of a wide range of delivery services, including parcel freight, secure, courier and logistics services.We provide a wide range of specialist delivery services to both business and

Our client is currently looking for a Warehouse Operative to work a Rotation shift in Rugby.This is an ongoing role that will become permanent for the right candidate.Rotating Shifts: 06:00-14:00//14:00-22:00.Warehouse Operative (Rotation).General Warehouse Duties such as:.Helping with all aspects o