Trabajos it hardware en ReadingCrear alertas

Field Engineer (304jc) – Reading/Thames Valley - £30k + £3,000–£4,000 On-Call Allowance + Overtime Our client is an established and growing technology services organisation providing engineering support to customers across the UK and who have come back to us to find more suitable candidates for them. DUE TO THE NATURE OF THIS RECRUITMENT CONSULTANCY, WE ARE ONLY ABLE TO REPRESENT INDIVIDUALS WHO ARE EX MILITARY. They are now looking to recruit a Field Engineer based in the Reading/Thames Valley area and willing to travel into London on a daily basis to join their expanding engineering team. This is a hands-on, customer-facing role that would particularly suit someone who enjoys working independently, travelling to different customer locations and solving practical technical problems. We are particularly interested in hearing from individuals who are seeking their first step into a communications, IT, networking, electronics or technical engineering background who are looking to develop a long-term civilian engineering career. As a Field Engineer, you will be responsible for attending customer sites throughout your region to install, maintain, configure and troubleshoot a range of IT, networking and associated hardware. Your responsibilities will include: Installing, maintaining and deploying IT networking, cabling and point-of-sale hardware. Configuring equipment in accordance with technical specifications and customer requirements. Testing completed installations to ensure equipment is fully operational before leaving site. Installing and configuring associated camera and footfall-monitoring equipment where required. Diagnosing and resolving technical faults during installation, maintenance and break-fix activities. Escalating more complex technical problems when appropriate. Managing your own workload, travel and appointments to meet customer service levels and response times. Maintaining accurate job records, asset information, photographs, test results and technical documentation. Liaising with customers and the central Service Desk to provide clear updates and ensure a professional service. Ideally, you will have experience or knowledge in some of the following: IT networking and associated hardware. Network cabling and connectivity. Installation, maintenance or technical field support. Fault diagnosis and structured problem solving. Working independently at customer or operational sites. Cisco or similar networking equipment. Completing technical documentation accurately. * Working to deadlines, service levels and operational standards. A full clean UK driving licence is essential and existing SC clearance would be advantageous but are not essential requirements. Experience involving communications equipment, IT systems, networks, electronics, equipment installation, technical maintenance or fault diagnosis could transfer particularly well. Just as importantly, the client is looking for someone who is reliable, organised, comfortable working independently and able to communicate professionally with customers. The ability to remain calm when things do not go according to plan, diagnose problems methodically and take ownership of getting the job completed properly will be highly valued. On-Call & Working Hours The standard working week is 37.5 hours and following training and familiarisation, you will join the engineering on-call rota, typically one week in every four. Which will attract an on-call allowance of £3 – 4k per year on top on the £30k base salary. There is also overtime on offer which can significantly increase your take home pay, and a company vehicle and fuel card are also provided, other benefits include, 25 days holiday plus bank holidays, company pension scheme, life assurance, On-Going Training & Career Development This is not simply a role where you are expected to remain at the same level indefinitely. The client offers structured induction, accompanied site visits and role-specific technical development. The original career pathway provides progression from Field Engineer into Senior Field Engineer / Technical Specialist, with longer-term opportunities to move towards Lead Engineer or Regional Engineering Manager positions. For more information, please contact Jean-Claude Hedouin at Ex-Mil Recruitment Ltd on (phone number removed)

Requisition ID: 300387 Relocation Authorized: National - SingleTelework Type: Part-Time TeleworkWork Location: ReadingExtraordinary teams building inspiring projects:Since 1898, we have helped customers complete more than 25,000 projects in 160 countries on all seven continents that have created jobs, grown economies, improved the resiliency of the world's infrastructure, increased access to energy, resources, and vital services, and made the world a safer, cleaner place. Differentiated by the quality of our people and our relentless drive to deliver the most successful outcomes, we align our capabilities to our customers' objectives to create a lasting positive impact. We serve the Infrastructure; Nuclear, Security & Environmental; Energy; Mining & Metals, and the Manufacturing and Technology markets. Our services span from initial planning and investment, through start-up and operations. Core to Bechtel is our Vision, Values and Commitments. They are what we believe, what customers can expect, and how we deliver. Learn more about our extraordinary teams building inspiring projects in our Impact Report. Project Overview:For more than 75 years, Atomic Weapons Establishment (AWE) has supported the UK Government’s nuclear defence strategy and the Continuous at Sea Deterrent. They use nuclear know-how and technical expertise to provide innovative solutions that support the UK’s counterterrorism and nuclear threat reduction activities. Like Bechtel, they create and maintain a safe operating culture where safety is front and centre of everything, they do. From building state-of-the-art facilities, to supporting Production, Science, Engineering and Technology programmes, the management of Environment, Safety, Health and Wellbeing underpins all activities at AWE. Bechtel is collaborating with AWE as an integrated team to deliver the preliminary design for the facilities within the Future Materials Campus. Since 2023, Bechtel has provided delivery and technical support, ensuring the project is completed on schedule and within budget.Job Summary:This Senior Control and Instrumentation Engineer position will support a multi-year United Kingdom nuclear infrastructure programme for which Bechtel is providing project management and engineering services. The programme is currently in the conceptual design phase and represents a multi-billion-pound investment in nuclear and non-nuclear facilities.The successful candidate will be a proactive and motivated professional who supports the Engineering Delivery Managers through the Building & Services (B&S) Project Engineer, acting as a technical representative for engineering activities. Responsibilities will include supporting engineering design delivery, preparing technical documentation, executing scheduled engineering activities, undertaking quality checks, and contributing to overall project delivery. The role will also involve producing technical reports, studies, designs and calculations using engineering software and supporting systems, as well as preparing procurement documentation including quantities. You will participate in design reviews and facilitate the timely resolution of comments to the satisfaction of reviewers, enabling the delivery of approved products. In addition, you will review and coordinate deliverables produced by junior C&I engineers across the B&S and Plant, Process & Equipment (PP&E) teams.You will be expected to work independently, exercise sound engineering judgement, and develop effective approaches to resolving technical challenges. You will also provide guidance to colleagues and respond constructively to requests for assistance with technical or procedural matters. The role includes supporting the effective execution of discipline work processes, ensuring that all activities are technically robust and comply with company requirements, contractual obligations, and applicable industry codes and standards.This position is designated as full time with telework per our global telework policy and requires at least three days of in-person attendance per week at the assigned office or project. • The role will be based primarily at Aldermaston UK, however travel to Bechtel’s London office (near Covent Garden) may also be required. Flexibility in work locations includes three days per week working at the project site and two days working from home or the Bechtel office. This arrangement will change as project needs adjust.• The position is open to United Kingdom (UK) Nationals only. • This position is also subject to a successful interview and agreement upon terms and conditions of employment. Major Responsibilities:• Technical leadership: Act as the technical authority for control, instrumentation, automation, and systems engineering activities, providing advice to engineering and project management.• Control system design: Develop and review control philosophies, system architectures, functional design specifications, control narratives, logic diagrams, cause-and-effect matrices, and alarm schedules.• Instrumentation engineering: Specify and select field instruments, analysers, control valves, actuators, measurement systems, and associated equipment.• Systems integration: Coordinate the integration of control and instrumentation systems with electrical, mechanical, process, safety, communications, and plant information systems.• Safety systems: Support the design and substantiation of safety-related and safety-instrumented systems, including appropriate independence, redundancy, diversity, and defence-in-depth requirements.• Requirements management: Define, interpret, trace, and verify technical, functional, performance, safety, security, and regulatory requirements throughout the engineering lifecycle.• Design assurance: Ensure designs are technically robust, fit for purpose, operable, maintainable, testable, and compliant with project requirements.• Codes and standards compliance: Apply relevant legislation, regulatory requirements, industry standards, contractual obligations, and company procedures.• Cybersecurity coordination: Incorporate applicable industrial control system and operational technology cybersecurity requirements into system design and delivery.• Technical documentation: Prepare and review calculations, reports, studies, drawings, specifications, data sheets, equipment schedules, interface documents, and procurement packages.• Design reviews: Participate in interdisciplinary, safety, constructability, operability, maintainability, HAZID, HAZOP, and 3D model reviews, ensuring comments are resolved.• Interface management: Identify and manage technical interfaces between systems, disciplines, suppliers, contractors, facilities, and external stakeholders.• Supplier and procurement support: Prepare technical requisitions, evaluate bids, review supplier documentation, monitor technical performance, and support equipment acceptance.• Verification and validation: Plan and support design verification, software and hardware validation, factory acceptance testing, site acceptance testing, commissioning, and performance demonstration.• Configuration and change control: Maintain design baselines and ensure that requirements, software, hardware, documentation, and engineering changes are properly assessed and controlled.• Quality assurance: Undertake checking, verification, and approval activities, maintaining appropriate records and objective evidence of design compliance.• Project delivery: Plan and execute engineering activities in accordance with agreed scope, programme, budget, quality objectives, and deliverable schedules.• Construction and commissioning support: Resolve technical queries, assess deviations and design changes, and support installation, testing, commissioning, and handover.• Team coordination and development: Review and coordinate the work of junior control, instrumentation, and systems engineers, providing technical guidance and mentoring.• Problem-solving and professional judgement: Work independently, evaluate complex technical issues, and develop practical, proportionate, and defensible engineering solutions.Education and Experience Requirements:• Bachelor’s degree in electrical, Electronic, Control, Instrumentation or a closely related engineering discipline from an accredited university or college. • Chartered Engineer status with the Institution of Engineering and Technology (IET), formerly the IEE, or an equivalent recognised professional institution.Required Knowledge and Skills:• Substantial progressive experience in control and instrumentation engineering, including design development and project delivery.• Experience working within the nuclear sector or another highly regulated industry.• Experience working in multidisciplinary engineering teams and coordinating technical interfaces.• Relevant industrial experience involving complex process plants, infrastructure or safety-critical facilities.• General nuclear engineering experience is desirable.• Comprehensive knowledge of control and instrumentation engineering principles, including: o Control-system architecture and functional design.o Instrument selection and specification.o Control philosophies, logic diagrams and cause-and-effect documentation.o Safety-instrumented and safety-related systems.o Systems integration, verification and validation.• Working knowledge of applicable UK legislation, regulatory requirements, industry standards, design criteria, codes, guides and engineering procedures.• Familiarity with engineering design tools, CAD methods and design-coordination software such as Navisworks.• Awareness of industrial control system and operational technology cybersecurity requirements.• Strong technical judgement, critical-thinking and problem-solving skills.• Ability to work independently and develop practical solutions to complex engineering issues.• Strong organisational, planning, coordination and communication skills.• Ability to prepare and review technical documentation to a high standard.• Ability to coordinate and mentor junior control and instrumentation engineers.• Relevant industrial experience. General nuclear experience a plus. • Must be able to obtain a SC Clearance for access to the AWE Site. Total Rewards/Benefits:For decades, Bechtel has worked to inspire the next generation of employees and beyond! Because our teams face some of the world's toughest challenges, we offer robust benefits to ensure our people thrive. Whether it is advancing careers, delivering programs to enhance our culture, or providing time to recharge, Bechtel has the benefits to build a legacy of sustainable growth. Learn more at Bechtel Total RewardsDiverse teams build the extraordinary:As a global company, Bechtel has long been home to a vibrant multitude of nationalities, cultures, ethnicities, and life experiences. This diversity has made us a more trusted partner, more effective problem solvers and innovators, and a more attractive destination for leading talent.We are committed to being a company where every colleague feels that they belong-where colleagues feel part of "One Team," respected and rewarded for what they bring, supported in pursuing their goals, invested in our values and purpose, and treated equitably. Click here to learn more about the people who power our legacy.Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law.We're creating a space where all people, including those with disabilities, can advance their careers and optimize their possibilities through a fair and inclusive workplace. If reasonable adjustments are needed to apply for an open position, please contact us to ensure we can provide an environment where each and every candidate can thrive: accessta-sourcing@bechtel.comBechtel is a verified company with the Disability Confident Scheme Job SummaryJob number: 300387Profession: Engineering

CompanyNewOrbit builds satellites that fly in very low Earth orbit, below 300 km, along with the electric propulsion that keeps them there. Flying closer to Earth means sharper imagery from smaller optics, and an orbit that cleans itself: our satellites de-orbit within a month at end of life, leaving no debris. Our AURA family of RF gridded ion thrusters powers our own NEO-1 satellite, with first flight planned for Q3 2028, and is also offered to other operators. Electric propulsion is what lets our satellites hold very low orbits, and our AURA RF gridded ion thruster is at the centre of it. RoleElectric propulsion is what lets our satellites hold very low orbits, and someone has to prove that our AURA RF gridded ion thruster does its job. As Electric Propulsion Test Engineer, you run the test programme that turns designs into verified, flight-ready hardware, using the company's own vacuum facilities. You work shoulder to shoulder with our propulsion engineers. You build the rigs, run the campaigns, find what fails and give the evidence that drives the next design. • Plan and own the propulsion test campaigns that support NEO-1 and our customer thruster deliveries., • Design and implement test rigs and equipment for propulsion testing., • Assemble and maintain test hardware, electronics and vacuum facilities., • Operate the vacuum system, RF generators, high-voltage supplies, gas feed and thrust balance during electric propulsion tests., • Run plasma diagnostics and data acquisition, then analyse the results., • Feed findings back to the design team quickly so each iteration improves on the last., • Keep clear records of every test configuration and result, giving traceable evidence for system verification and qualification., • Work with mechanical, electrical and control engineers to integrate and test each new iteration of the ion propulsion system., • Practical electric propulsion testing experience, ideally with RF generators, high-voltage power supplies and thrust balances., • Experience with vacuum systems (pumps, gauges, valves), power supplies, fluid management (high-pressure gas tanks, mass flow controllers) and data acquisition systems., • Working knowledge of RF gridded ion thrusters and of plasma physics, diagnostics and ionisation processes., • A rigorous approach to test planning, data quality and documentation., • Willingness to work extended hours on-site., • Experience with plasma diagnostics such as Langmuir probes or retarding potential analysers., • Scripting for data analysis and test automation (Python or MATLAB)., • Experience with test rig design or hardware verification for flight programmes. Pioneering space technology - Your work on our RF gridded ion thrusters and VLEO satellite platform will redefine satellite operations and challenge traditional LEO. • Ownership and impact - You'll have a level of ownership that's rare in the space industry, and you'll take part in the full lifecycle of satellite technology., • Equity and competitive salary - Alongside a competitive salary you receive a company ownership stake, so you share in the technology you help build and in our collective success., • Comprehensive benefits - Private health insurance with dental and optical cover, and annual health check-ups., • Hybrid working - One dedicated remote day per week., • Visa sponsorship and relocation support - We sponsor visas and provide relocation support for candidates moving to join us. #J-18808-Ljbffr

Remote first, 1 day a week in Reading | £70-80k Our client is a heritage sports brand with 100 years of history. It was recently backed by a leading private equity firm and is now going fully digital. It’s building camera based auto scoring tech that powers online play, live stats and training for players worldwide. You’ll build the Go services and databases behind it, working with the hardware, product and frontend teams. • Build and maintain backend REST services in Go, • Design and evolve the SQL data model behind those services, • Help define the backend architecture and refine user stories with product, • Integrate APIs with the frontend team, • Write automated tests and deploy to production, • Monitor performance and quality in production with ops, • Share knowledge through code reviews and pair programming, • 4+ years commercial experience in Go, or a similar language like Kotlin or Rust, • Backend experience on a high volume consumer product, • Strong REST API experience, • Fluent SQL and familiarity with PostgreSQL, • Automated testing and exposure to CI/CD pipelines, • Comfortable thinking at architecture level, • A figure it out attitude. Priorities move fast and you’ll have freedom to shape the work, • Kubernetes and containerised deployments, • Grafana and Loki for observability, • Swift or Kotlin for native mobile, or a feel for modern frontend, • Bonus up to 20% of salary, • Pension, 3% employer and 5% employee, • Cycle to work scheme, with a salary sacrifice EV scheme coming soon, • Spec your own dev machine, • Access to 60+ coworking spaces and their events, • Remote first, 1 day a week in the Reading office with travel costs covered, • Work directly with a seasoned CTO, CPO and tech investors #J-18808-Ljbffr

NewOrbit builds satellites that fly in very low Earth orbit, below 300 km, along with the electric propulsion that keeps them there. Flying closer to Earth means sharper imagery from smaller optics, and an orbit that cleans itself: our satellites de-orbit within a month at end of life, leaving no debris. Our AURA family of RF gridded ion thrusters powers our own NEO-1 satellite, with first flight planned for Q3 2028, and is also offered to other operators. Electric propulsion is what lets our satellites hold very low orbits, and our AURA RF gridded ion thruster is at the centre of it. The AIT Systems Integration Engineer owns functional and system-level testing of our spacecraft and the verification tracking for each satellite campaign. Working within the Assembly, Integration & Test (AIT) team, you will take the satellite from integrated subsystems to a flight-ready, fully verified vehicle. You will bridge systems engineering, subsystem teams and the AIT Engineering Functions. You will turn requirements into test procedures, run and lead test campaigns, and make sure every requirement is closed out with traceable evidence before launch. The role suits someone who knows SmallSat development approaches, is hands-on with Hardware and Ground Support Equipment (GSE), and understands how satellite subsystems behave together. Functional and system testing • Own the functional and system test programme for the spacecraft, from unit-level acceptance, integration, thought to whole System End-to-End Testing., • Write, review and run test specifications and procedures, including basic functional testing, FDIR, end-to-end tests and mission/day-in-the-life simulations., • Lead test readiness reviews and test review boards, and sign off test reports., • Run tests before, during and after environmental campaigns (vibration, thermal vacuum, EMC) to confirm spacecraft health., • Diagnose anomalies, raise and track Non-Conformance Reports (NCRs), and drive root-cause investigations with subsystem engineers., • Develop and maintain automated test scripts and telemetry/telecommand (TM/TC) databases used for testing. Verification tracking • Own the verification matrix (VCRM) for the satellite campaign, mapping each requirement to its method: test, analysis, inspection or review of design., • Plan the verification approach with Systems Engineering and keep it current through the campaign., • Collect and link verification evidence, and report close-out status against milestones., • Prepare verification data packages for key reviews (e.g. CDR, TRR, QR, PSR/FAR) and customer acceptance. GSE and test infrastructure • Specify, integrate and validate Electrical GSE, including power supplies, battery simulators, RF test sets, umbilicals and break-out boxes., • Maintain the spacecraft checkout software and ground segment interfaces used on the AIT floor., • Make sure GSE is calibrated, configuration-controlled and safe for use with flight hardware. Integration and campaign support • Support subsystem and payload integration, including electrical interface checks, harness verification and safe-to-mate procedures., • Plan and schedule system test activities within the wider AIT campaign., • Support launch campaign activities, including transport, launch site checkout and launch vehicle interface testing., • Work to cleanroom, ESD and flight hardware handling standards, and contribute to lessons learned for future missions., • Degree in Aerospace, Electronic, Electrical or Systems Engineering, Physics, or equivalent experience., • Typically 3+ years in spacecraft AIT, systems integration or test engineering., • Hands-on experience with functional and system-level testing of satellites or space subsystems., • Familiarity with SmallSat development approaches: agile, rapid iteration, protoflight models, and pragmatic use of COTS components., • Working knowledge of satellite subsystems: EPS, OBC/C&DH, ADCS, communications (TT&C and payload RF), propulsion, thermal, structures and payloads., • Experience using and setting up GSE, including EGSE, checkout systems and RF test equipment., • Experience with requirements verification and maintaining a verification matrix through to close-out., • Comfortable with lab equipment: oscilloscopes, power supplies, multimeters, spectrum analysers, logic analysers., • Familiarity with common spacecraft interfaces and protocols (e.g. CAN, I2C, SPI, RS-422, SpaceWire, CCSDS)., • Clear technical writing for procedures, test reports and NCRs., • End-to-end involvement in at least one satellite mission that reached launch., • Test automation and scripting in Python or similar, and experience with spacecraft control or checkout software (e.g. OpenC3/COSMOS, Yamcs, SCOS-2000)., • Experience planning or supporting environmental test campaigns (vibration, TVAC, EMC)., • Knowledge of ECSS standards (e.g. ECSS-E-ST-10-02 Verification, ECSS-E-ST-10-03 Testing) or NASA equivalents., • Requirements management tools (e.g. DOORS, Jama, Polarion, Valispace)., • Launch campaign experience at a launch site., • Cleanroom and ESD-certified flight hardware handling., • Eligibility for UK security clearance, or the ability to obtain it, if required by the programme., • Takes ownership: drives tests and verification to close-out without waiting to be asked., • Methodical and detail-focused, with a strong sense of safety and quality around flight hardware., • Calm, structured problem-solver when anomalies appear under schedule pressure., • Communicates clearly across disciplines, from subsystem engineers to programme managers and customers., • Comfortable in a fast-paced SmallSat environment, balancing rigour with pace., • Willing to work flexibly during test and launch campaigns, including occasional travel., • Pioneering space technology - Your work on our RF gridded ion thrusters and VLEO satellite platform will redefine satellite operations and challenge traditional LEO., • Ownership and impact - You'll have a level of ownership that's rare in the space industry, and you'll take part in the full lifecycle of satellite technology., • Equity and competitive salary - Alongside a competitive salary you receive a company ownership stake, so you share in the technology you help build and in our collective success., • Comprehensive benefits - Private health insurance with dental and optical cover, and annual health check-ups., • Hybrid working - One dedicated remote day per week., • Visa sponsorship and relocation support - We sponsor visas and provide relocation support for candidates moving to join us. #J-18808-Ljbffr

NewOrbit builds satellites that fly in very low Earth orbit, below 300 km, along with the electric propulsion that keeps them there. Flying closer to Earth means sharper imagery from smaller optics, and an orbit that cleans itself: our satellites de-orbit within a month at end of life, leaving no debris. Our AURA family of RF gridded ion thrusters powers our own NEO-1 satellite, with first flight planned for Q3 2028, and is also offered to other operators. Electric propulsion is what lets our satellites hold very low orbits, and our AURA RF gridded ion thruster is at the centre of it. We are seeking a Structural Engineer to support the design, analysis, testing, and qualification of structures for our VLEO satellite missions. You will work across the full development lifecycle of flight hardware, from early structural modelling and design reviews through environmental testing and validation, helping ensure the reliability and survivability of spacecraft operating in one of the harshest orbital environments. You will work closely with mechanical, thermal, propulsion, systems, and AIT teams to develop structurally robust hardware capable of surviving launch and sustained operations in Ultra-Low Earth Orbit. • Perform structural analysis of flight hardware including spacecraft structures, propulsion subsystems, and mechanical assemblies. This includes static, modal, random vibration, sine, shock, and quasi-static load cases., • Develop and validate finite element models (FEM) for spacecraft and high-performance aerospace structures., • Perform hand calculations for preliminary analysis in support of FEA., • Support structural sizing, stiffness optimisation, and load path analysis for launch and in-orbit environments., • Plan and execute vibration, shock, and structural qualification testing test campaigns end-to-end: write the test plan, instrument the hardware, interpret the data, correlate the model, and close out the qualification report., • Instrument hardware using accelerometers and strain gauges, and correlate test results back to analytical models., • Review engineering drawings and collaborate directly with designers to drive structural design decisions., • Support qualification activities against relevant aerospace and space standards including GEVS, ECSS, and NASA requirements., • Contribute to structural verification activities across development, integration, and test phases., • Education: B.S. or M.S. degree in Aerospace Engineering, Mechanical Engineering, Structural Engineering, or a related field., • 3+ years of structural analysis experience on flight hardware, including spacecraft, launch vehicles, missiles, or high-performance structures., • Experience with structural analysis of a satellite's primary or secondary structure (i.e., the load-bearing bus/frame, not just a subsystem or payload) is strongly preferred., • Experience with structural analysis of spacecraft structures and subsystems, including electronic boxes, propulsion systems, hydraulics, or solar panels., • Experience with design for manufacturing (DFM)., • Hands‑on experience with FEM and ability to justify modelling assumptions and approaches., • Experience with Altair OptiStruct is a strong plus; proficiency with industry‑standard solvers such as NASTRAN, ANSYS, or Abaqus is required., • Familiarity with launch environments including random vibration PSDs, SRS shock spectra, and quasi‑static load factors., • Practical experience supporting environmental testing, including instrumentation with accelerometers and strain gauges and model correlation activities., • Confidence reading and reviewing engineering drawings and working directly with design engineers on structural decisions., • Experience with analysis of composite materials., • Experience with material testing, metallic and composites, • Pioneering space technology - Your work on our RF gridded ion thrusters and VLEO satellite platform will redefine satellite operations and challenge traditional LEO., • Ownership and impact - You'll have a level of ownership that's rare in the space industry, and you'll take part in the full lifecycle of satellite technology., • Equity and competitive salary - Alongside a competitive salary you receive a company ownership stake, so you share in the technology you help build and in our collective success., • Comprehensive benefits - Private health insurance with dental and optical cover, and annual health check-ups., • Hybrid working - One dedicated remote day per week., • Visa sponsorship and relocation support - We sponsor visas and provide relocation support for candidates moving to join us. #J-18808-Ljbffr

We are now seeking a Senior Control Systems Engineer to join our growing engineering team at our state of the art facility in Reading, Berkshire. This is a technically focused role, responsible for leading the design, development and commissioning of advanced control and automation systems across a wide range of industries. • Lead and contribute to all stages of the project lifecycle, ensuring high‑quality technical delivery, • Provide technical leadership, mentoring junior engineers and sharing best practices, • Build strong client relationships through effective technical communication, presentations and documentation, • Take ownership of technical tasks and projects, delivering to budget, quality, safety and programme expectations, • Produce and review specifications, design documents and engineering reports, • Develop, configure and implement control system application software across multiple platforms, • Conduct testing and commissioning activities in live operational environments, • Maintain consistently high engineering standards throughout the design and delivery process, • Lead or work within multi‑disciplinary teams, adapting to a variety of environments, • Ensure compliance with the company’s Integrated Management System, • Contribute to continuous improvement and support the development of the wider engineering community, • Degree‑qualified in control, automation or electrical engineering (or equivalent proven experience), • Member of a relevant engineering or professional body (e.g., MIET); Chartered status desirable, • Extensive experience within the control and automation industry, • Proven track record delivering control solutions within sectors such as Food, Utilities, FMCG, Process or Materials Handling, • Strong technical leadership and project engineering experience, • Excellent interpersonal, written and verbal communication skill, • Highly motivated, ambitious and capable of operating at a senior technical level, • HMI & SCADA technologies, • Regional control systems & telemetry, • Data analysis, reporting & IT/database integration, • MES platforms, • Industrial & IT hardware, • Operational Technology systems, • Functional safety, • OT cyber security principles, • 25 days annual leave plus Bank Holidays, • Enhanced pension contribution, • Ongoing internal training and Clear career development pathways, • A supportive employer committed to employee Well being, • Genuine opportunities for career progression within a growing business, • Access to employee discount scheme We are MARCH®. The leading provider of critical engineering services. Supporting the industries we all rely on to improve their infrastructure, process, and digital environments. We work together with our customers to maintain business continuity, optimise output, and drive new standards in productivity, reliability, and sustainability. We help deliver operational resilience, increased performance, and better environmental outcomes, across the board. Why March? Progress is People. MARCH has ambitious plans and central to our future growth is attracting, developing and retaining the very best talent. Whether your role is onsite or office-based, engineering or support, we offer opportunities for all our people to develop their careers and maximise their potential. MARCH is committed to building teams that reflect a wide range of backgrounds, perspectives, and experiences. We believe diverse thinking strengthens engineering, and we welcome applications from all backgrounds. If you need any adjustments during the recruitment process, just let the team know. #J-18808-Ljbffr

RF Engineer At OQC, we aren’t just theorising about the future; we’re building it. Born from a philosophy of bold innovation, we’ve successfully transitioned quantum computing from an academic dream into a commercial reality. The most exciting thing is that we’re just getting started and we’ve recently closed our £260 million Series C funding round – the largest fundraise ever completed by a quantum computing company in Europe. The Purpose As an RF Engineer, you'll design, develop and optimise the RF solutions at the heart of OQC's quantum computing systems. Combining passive RF and PCB design expertise with microwave simulation, prototyping and hands‑on testing, you'll create robust control and readout solutions that enable both cutting‑edge R&D and the deployment of commercial quantum computers. The Role Working within our Advanced Product Development team, you'll take RF solutions from requirements and simulation through prototyping, characterisation and deployment. You'll design RF circuitry, PCBs and packaging, optimise microwave performance and work across hardware teams to ensure solutions integrate successfully into OQC's wider technical stack. This is a hands‑on engineering role where you'll combine deep RF knowledge with practical design and testing, owning technical decisions and continuously improving the performance of our RF systems. What You'll Be Working On • Design and develop passive RF/microwave circuitry, PCBs and packaging for quantum control and readout systems., • Translate engineering requirements into RF designs that deliver the required signal performance while managing electromagnetic interference., • Simulate, prototype and characterise RF solutions using microwave analysis tools, FEA, electromagnetic (EM) tools and laboratory instrumentation., • Optimise signal integrity, signal‑to‑noise performance, filtering and microwave I/O performance through iterative design and testing., • Analyse test results and independently identify opportunities to improve existing RF designs, components and testing approaches., • Own RF solutions through technical validation, documentation, supplier engagement and handover into OQC's live quantum computing systems., • Collaborate across hardware, engineering and supply chain teams, providing RF expertise and supporting technical installations in the UK and internationally. What We’re Looking For • Strong practical experience working with RF and microwave technology, ideally in the 4-10 GHz range, • Hands‑on experience designing passive RF systems and components, alongside PCB design experience., • Strong understanding of RF/microwave principles, theory and design techniques., • Experience designing, simulating, prototyping and testing RF or microwave circuitry and systems,, • Experience using electronic design, FEA, electromagnetic (EM) simulation, and microwave analysis tools., • Ability to gather technical requirements, translate them into practical designs and clearly communicate design progress and results., • Strong analytical and problem‑solving skills, with the ability to use experimental data to drive design improvements., • Bachelor's degree or higher in Electronics or a related discipline. The 'Nice-to-Haves' • Experience with ANSYS or similar electronic simulation and analysis tools., • Experience with PCB layout would be advantageous, • Experience designing RF solutions for cryogenic environments or working with cryogenic components., • Experience working with analogue/digital converters and DSP., • Python or similar scripting experience for analysis, automation or testing., • Experience supporting RF hardware through deployment into live technical systems. Why Join OQC You will join a world‑class team at the forefront of the next computational era. We offer a culture of bold innovation, the chance to work with unique lab infrastructure, and the opportunity to see your work redefine the limits of computation. Learn more about our benefits and positive work culture here:company/careers-at-oqc/ #J-18808-Ljbffr

New Business Development Executive / Manager – Corporate IT Sales Location: Reading (Office-based 3/4 days per week + Field-based) Salary: Up to £70,000 Basic DOE + Uncapped Commission Benefits: Private Healthcare, Pension, 25 Days Holiday (rising to 30 over 5 years), Group Life Insurance, Income Protection, Gym Discounts, Free Fuel Fridays, Employee of the Quarter, Employee Referral Programme & More. About My Client My client is a leading UK technology solutions provider, helping organisations unlock the power of technology through innovative IT hardware, services, and solutions. With a strong reputation for customer service, technical expertise, and long-term partnerships, my client is continuing to grow their Corporate and Commercial division. Due to this expansion, my client is looking for experienced and ambitious New Business Development Executives, Business Development Managers, and Corporate Account Managers to join their growing team in Reading. This is an exciting opportunity to join a business where you’ll have the autonomy to build your own customer base, develop long‑term relationships, and benefit from uncapped earning potential. As a New Business Development Executive / Manager, you will be responsible for driving new business within the corporate and commercial end‑user market. You will identify and engage new customers, build your own sales pipeline, and develop profitable relationships with businesses across a range of industries. Working with a broad portfolio of IT hardware, services, and technology solutions, you will help customers find the right solutions while achieving monthly and quarterly gross profit targets. • New Business Development: Identify, prospect, and win new corporate and commercial customers through proactive outreach, networking, referrals, and targeted sales activity., • Account Development: Build and manage long‑term customer relationships, identifying opportunities for account growth, cross‑selling, and upselling., • Pipeline Generation: Utilise data platforms, CRM systems, and market intelligence tools to source leads and maintain a healthy sales pipeline., • Consultative Selling: Understand customer requirements and recommend appropriate IT hardware, services, and technology solutions., • Sales Performance: Achieve agreed monthly and quarterly gross profit targets, • Sales Operations: Prepare quotations, manage opportunities, process orders, and work towards agreed quote‑to‑order conversion targets., • CRM & Reporting: Maintain accurate CRM records, sales forecasts, and activity reports to support business intelligence and performance tracking., • Stakeholder Collaboration: Work closely with procurement, technical, operations, and wider sales teams to deliver an excellent customer experience., • Market Development: Stay up to date with technology trends, customer needs, and industry developments, representing the business professionally at events and meetings. My client is looking for commercially driven sales professionals who enjoy winning new business, building relationships, and delivering results. You will ideally have: • Experience in IT sales, preferably within a technology reseller, VAR, MSP, or IT solutions provider., • A proven track record of winning new business across the SME and/or Corporate end‑user market., • Experience selling IT hardware, managed services, software, or technology solutions., • A strong understanding of consultative and solution‑led selling., • Confidence engaging with senior decision‑makers and business stakeholders., • Excellent communication, negotiation, and relationship‑building skills., • A proactive, self‑motivated, and target‑driven approach., • The ability to manage your own pipeline and work independently., • Strong commercial awareness and a focus on profitable sales growth., • The ambition to develop a successful, long‑term career in technology sales., • Experience working with customers in sectors such as Manufacturing, Automotive, Finance, Utilities, Charities, FMCG, or other corporate environments would be advantageous., • Uncapped commission with strong earning potential., • 25 days’ annual leave, rising to 30 days over 5 years., • Group Life Insurance., • Income Protection., • Free Fuel Fridays., • Employee of the Quarter recognition., • Employee Referral Programme., • Career development and progression opportunities., • Supportive and collaborative working environment., • The opportunity to build and manage your own customer portfolio. This is an opportunity to join a growing technology business where your contribution will make a genuine difference. You’ll have the freedom to develop your own pipeline, build valuable customer relationships, and work with a team of experienced professionals who are committed to your success. Whether you’re an experienced New Business Development Executive, Business Development Manager, or Corporate Account Manager, my client wants to hear from ambitious sales professionals who are ready to take their career to the next level. #J-18808-Ljbffr

At OQC, we aren’t just theorising about the future; we’re building it. Born from a philosophy of bold innovation, we’ve successfully transitioned quantum computing from an academic dream into a commercial reality. The most exciting thing is that we’re just getting started. Lead scientific research that advances OQC’s quantum processors, superconducting circuit technology and supporting infrastructure. As a Senior Quantum Engineer, you’ll own complex research projects across the full scientific lifecycle—from identifying research priorities and designing experiments through to implementation, data analysis and final recommendations. Your work will directly influence OQC’s technology roadmap and the performance of future quantum processing units. You’ll be a senior member of our Quantum Science & Exploratory Research team, combining hands‑on experimental research with technical leadership, project ownership and mentoring. Working across superconducting quantum circuits, processor characterisation, calibration, benchmarking and cryogenic measurement systems, you’ll investigate the limitations of existing technologies and explore new approaches to qubit design, packaging and quantum‑processing infrastructure. You’ll also help shape the QSER roadmap, coordinate the resources required to deliver experimental programmes and support the development of Quantum Engineers across the team. • Lead complex scientific research projects from initial concept and experimental design through to implementation, analysis, reporting and technical recommendations., • Design, simulate and characterise novel superconducting components for quantum processors and their supporting infrastructure., • Measure, calibrate and benchmark superconducting quantum circuits, developing performance metrics and investigating QPU design or processor limitations., • Lead investigations into alternative qubit architectures and packaging approaches, translating experimental evidence into recommendations for future development., • Coordinate the scheduling and resourcing of quantum‑processing infrastructure, including multiple cryogenic systems, control electronics and measurement equipment., • Shape the QSER technology roadmap by reporting progress, assessing the feasibility of milestones and recommending future scientific priorities., • Mentor Quantum Engineers, maintain high‑quality project documentation and represent OQC through conferences, research collaborations and scientific publications., • A degree in physics, quantum engineering, electrical engineering or another relevant discipline, or equivalent professional experience., • Experience owning research projects involving the measurement, characterisation or operation of quantum systems., • Hands‑on experience running experimental quantum‑computing measurements, benchmarking processes or operational methods within an academic or industrial environment., • Experience creating or running simulations of the quantum or radio‑frequency properties of superconducting circuits., • Strong scientific software‑development skills, particularly Python or a comparable language, for experimental automation and data analysis., • The ability to analyse complex datasets, develop meaningful performance metrics and translate results into clear technical recommendations., • Strong project leadership or project‑management skills, including an understanding of resource, scheduling and budget implications., • Excellent written and verbal communication skills, with the ability to distil complex scientific information for different technical audiences., • A creative and evidence‑led approach to problem‑solving, combined with sound scientific judgement and strong planning skills., • The ability to influence technical direction, delegate effectively and support the development of less‑experienced engineers., • A PhD in physics, quantum engineering, electrical engineering or a closely related field., • Experience using or developing microwave‑frequency control hardware for superconducting quantum systems., • Scientific publication experience, particularly within superconducting circuits, quantum measurement or related fields., • Experience presenting research findings at conferences, technical reviews or collaborative research forums., • Hands‑on experience preparing, handling and installing samples within cryogenic enclosures., • Knowledge of the specification, installation and maintenance of RF or DC wiring., • Experience operating and maintaining cryogenic refrigeration and vacuum systems., • Experience developing remote‑operation or automation methods for low‑noise measurements. You’ll join a multidisciplinary team working at the forefront of superconducting quantum computing, with the opportunity to take genuine ownership of research that informs both near‑term engineering decisions and OQC’s longer‑term technology direction. This is an opportunity to combine deep scientific work with visible technical leadership—investigating novel quantum technologies, working directly with advanced cryogenic and measurement infrastructure, and helping develop the people and research capabilities behind OQC’s next generation of quantum processors. #J-18808-Ljbffr

Are you hands-on with IT hardware and enjoy working in a fast-paced operational environment? We are looking for a Technical Operations Associate to join a growing technical operations team specialising in IT asset recovery, refurbishment, recycling, and secure device processing. You will be responsi

Sales Consultant — Premium Mobility Furniture | £60,000–£100,000 OTE The Sleep & Recovery Market Surge With 83% of UK adults averaging under 7 hours of sleep a night and fatigue named the top daily productivity challenge, households are investing directly in ergonomic, sleep-restoration hardware. Our client leads this market with premier adjustable beds and rise-and-recline furniture equipped with heat therapy, massage functions, and custom positioning options. Empowering people to sleep, move, and live better creates an exceptional, high-converting consultative sales environment. Pre-Qualified Regional Diary Pre-Vetted Customer Appointments: An internal marketing team fills your regional diary with 100% pre-qualified with no cold calling or independent lead generation. Bespoke Product Line: Showcase premium adjustable beds and riser-recliners designed for fatigue management, joint support, and sleep restoration. Empathetic Consultations: Focus entirely on delivering respectful, face-to-face home consultations with mature clients and their families. 12-Week Launch Backing & Uncapped Earnings This is a self-employed, 100% commission-driven role with no base salary, giving you complete ownership over your earnings - supported by a dedicated financial safety net during your start-up phase: 12-Week Cash Flow Support: Receive a £300 weekly bonus (for running 14 allocated visits) plus £25 for every completed demonstrationduring your first 12 weeks to support cash flow as you establish your field schedule. £60,000–£100,000 Baseline OTE: Realistic annual earnings scaling directly with completed visits, with top closers reaching £160,000+. Uncapped Income Potential: Transparent commission structure rewarding consultation volume and customer satisfaction. Who This Suits A customer-focused B2C sales professional or home upgrade consultant with strong face-to-face presentation skills. Displays genuine empathy, active listening skills, and integrity to build immediate trust with older customers. Holds a full UK driving licence and operates a reliable personal vehicle for regional field visits. (It will not work if you require a guaranteed monthly salary, want a corporate office job, or lack your own vehicle.) The Process Promise Citrus Connect will call you shortly after you apply for a brief, informal chat to discuss your background, earning goals, and available territories. No long forms or assessment centres. Apply today to start the conversation. JBRP1_UKTJ

Category Specialist- TechnologyBecause we strive to put people first. Apply now, read the job details by scrolling down Double check you have the necessary skills before sending an application. Culture, our way.Procurement at PrimarkWhat’s a career at Primark all about? The positive impact you’re making, the experiences you’re having and the people you’re with. You’re our inspiration. Embrace what sets you apart, own your career and develop in ways you never expected. Leave your mark. And do it your way.What You’ll GetThis role is a hybrid opportunity, offering 1-2 days Working from home.People are at the heart of what we do here, so it’s essential we provide you with the right environment to perform at your very best.Let’s talk lifestyle: Healthcare, pension, and potential bonus. 27 days of leave, plus bank holidays and if you want, you can buy 5 more. Because Primark is all about tailoring to you, we offer Tax Saver Tickets, fitness centre, and a subsidised cafeteria. What You’ll DoWe want you to feel challenged and inspired. Here, you’ll develop your skills across a range of responsibilities:Support the development and execution of the Technology category strategy across software, SaaS, cloud, infrastructure, telecommunications, hardware, and professional services.Analyse spend, supplier performance, contracts, market trends, and business requirements to identify opportunities for cost savings, value creation, and risk mitigation.Lead and support sourcing activities, supplier negotiations, and contract renewals, delivering commercially advantageous outcomes aligned with business objectives.Build strong relationships with business stakeholders, suppliers, and offshore delivery partners to ensure successful procurement planning and project execution.Drive supplier governance, performance management, and continuous improvement initiatives to enhance service quality, innovation, resilience, and sustainability.Leverage data, analytics, and digital tools to improve procurement efficiency, increase spend visibility, support decision-making, and ensure compliance with governance standards.What You’ll BringHere at Primark, we want everyone to feel valued – so please bring your authentic self to work, of course with some other key experience and abilities for this role in particular:5+ years’ experience in Procurement, with strong knowledge of procurement processes, sourcing, supplier management, and category management principles.Technology procurement expertise, including software/SaaS, cloud, hardware, telecommunications, managed services, and technology professional services.Strong commercial and negotiation skills, with experience evaluating pricing and licensing models, managing contracts, and delivering value-driven outcomes.Excellent stakeholder management and influencing abilities, building trusted relationships across internal teams, suppliers, and external partners in a matrixed environment.Analytical and strategic mindset, using spend, supplier, contract, and market data to identify opportunities, manage risk, and support evidence-based decision-making.Highly organised, proactive, and results-focused, with strong communication, project management, problem-solving, and change-driving capabilities, alongside a keen interest in technology market trends and category development.Excited? Good. Because it’s energising to put your skills to work, in a growing global business committed to encouraging people to express themselves – and feel a sense of belonging. Apply to be part of Primark’s future, today… and enjoy career growth, our way.About PrimarkAt Primark, people matter. They’re the beating heart of our business and the reason we’ve grown from our first store in Dublin in 1969 to a 9bn+ turnover business a over 80,000 colleagues and over 440 stores in 17 countries today. Our values run through everything we do. In essence, we're Caring and always strive to put people first. We're also Dynamic, bravely pushing the boundaries to stay ahead. And finally, we succeed Together.If you need any reasonable adjustments or have an accessibility request, during your recruitment journey, such as extended time or breaks between online assessments, a sign language interpreter, mobility access, or assistive technology please contact your talent acquisition specialist. All offers of employment are subject to background checks, including right to work, reference education and for some roles criminal, and financial checks. xrnqpay If you have any concerns, please reach out to our talent acquisition team to discuss. #LIHybridREQ ID: JR-13703

Temp to Perm role Site based Van, fuel card, tools, uniform provided Must be British citizen to obtain required security clearance Initiative-taking individual, capable of working alone and running with ongoing issues where needed. required skills/experience work within the controls and automation side of industry with a focus of aiding engineering where applicable alongside being second level fault finding for our electricians and support on electrical maintenance where needed. this will include setting up and programming multiple level monitoring devices such as pulsars, installing and commissioning waste and clean water plant, and general instrumentation maintenance across a wide area including work on telemetry systems. Core Responsibilities - Maintenance & Calibration: Test, clean, and calibrate field instruments like flow meters, pressure sensors, and level indicators. - Fault Finding: Troubleshoot and fix issues in electrical circuits, relay logic, and automation hardware. - PLC & SCADA Support: Work with Programmable Logic Controllers (PLCs) and Supervisory Control and Data Acquisition (SCADA) systems to keep processes running smoothly. - Installation & Commissioning: Set up new control equipment and integrate it with existing plant networks. - Electrical maintenance and testing. Provide second level fault finding for our electricians and support on electrical maintenance when required. - Safety & Compliance: Follow strict health and safety rules, do risk assessments, and keep accurate maintenance logs. Key Requirements & Skills - Qualifications: A time-served apprenticeship or an HNC/equivalent in electrical, electronic, or instrumentation engineering. - Technical Knowledge: Experience with PLCs (such as Rockwell, Allen-Bradley, or Siemens), SCADA software, and reading circuit diagrams. - Certifications: Often requires a full UK driving licence and sometimes an 18th Edition wiring regulations qualification. - Work Style: Ability to work independently or in a multi-disciplinary team. Participate in standby rotas for emergency callouts. TPBN1_UKTJ

An excellent opportunity for an experienced Nursecall Field Engineer to join a well-established company. Job Type: Full-Time, Permanent. Salary: £30,000 - £40,000 Per Annum, Depending on Experience. Location: South of England, mainly Oxfordshire, Hampshire, Kent, Devon etc. although expect reasonable travel to further areas throughout the region. Working Hours: Monday to Friday, 0900 - 1730 (Overtime Opportunities). About The Company: They are proud to be one of the UK's leading providers of healthcare technology. Their team specialises in installing and managing digital nurse call systems and fall prevention technology for care and nursing homes. They also offer services in Internet, Wi-Fi connectivity, telephone systems, mobile handsets, and more. No matter where clients are in their digital transformation, they are here to help. Job Description: We are currently looking for a Nursecall Field Engineer to join our team and help us to provide the highest quality of installation and maintenance service of nurse call systems. This role will generally cover some semi-national travel however you should be based in the South of England (e.g. Oxfordshire, Hampshire area or similar). It's typical to have up to a 2-hour commute to the job. Occasionally travel further afield will be required, e.g. to Ise of Wight. You must consider that there could be installations up to Midlands area or beyond, however we will try to limit your work area to the South of England where possible. You must have strong nurse call experience, ideally on Wireless Nurse Call Systems such as Medicare Systems, Courtney Thorne, ARM, etc. Whilst wired Nurse Call experience is also valid, we would prefer some wireless experience where possible. Experience on fire alarms or other addressable call systems is acceptable. This is a hands-on roll - you will be issued tools and be hands-on, so being confident and practical is a must. Technical competence is something that can always be worked on, but you must be able to demonstrate you have confidence and a good grounding in nurse call. You must be technically literate and competent with modern technology, e.g. an understanding of Android, basic IP addressing / networking, Microsoft Windows etc. - we aren't expecting you to be a software developer, but we need to ensure you are happy troubleshooting Microsoft Windows on WiFi connection issues, software updates and installing files etc which is required for some Microsoft Windows based Nurse Call systems. Experience, Knowledge and understanding of networks and IP based systems is desirable. About The Role: As a Nursecall Field Engineer, you will be responsible for servicing existing nursecall systems (Mainly Medicare and Intercall), as well as new installations of their HARIS Nursecall system across the North of England. This will be including fault finding to resolve problems, programming call points, replacing effected components and installing new peripherals. This is entirely within adult social care environments (care homes, nursing homes etc). You may also need to install a small number of data cables to facilitate nurse call equipment, so you should be confident in chase walls, drilling holes, running and terminating data cables Key Duties: · Testing nursecall system functionality to fault find issues · Setting up new display screens and call points to replace faulty units · Providing on site training on system functionality · Installing new peripherals and accessories on nurse call systems · Installing new nurse call systems · Running a small amount of CAT5e/CAT6 Data Cables to support new hardware installations · Investigating Wi-Fi or other IT faults · Racking and patching IT equipment in data cabinets You will be the face of the company whilst on site with customers, so great people skills will be important - often in a technical situation, customers will look to you for help and guidance, so being able to translate complex terms to simple explanations for non-technical staff is a great skill. Ultimately this is an opportunity to develop with a chance to build a rewarding career in a small professional company Candidate Requirements: · Full UK driving license · Pass a DBS Basic Disclosure (formally referred to as a CRB check) · Have a fluent competency in English · Have right to remain / right to work in the UK (we will not sponsor employment / residency) Company Benefits: · Company vehicle with Fuel card · Company laptop · Company phone · Overtime opportunities · Uniform with ID · All tools and equipment paid for · 30 days annual leave + bank holidays + your birthday If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need. TPBN1_UKTJ

Field Service & Installation Engineer, Reading (Field Based) When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. We are looking for a Telematics Engineer to provide continued support to our growing and established customer base within Reading and the surrounding areas. You will have access to many of our benefits, including annual shift allowance in addition to your salary, annual pay reviews, company vehicle, with laptop, mobile phone and tools provided to ensure you are fully equipped in your new role. Are you an experienced Field Service & Installation Engineer looking for a new opportunity and challenge? How about the opportunity to join a market leading telematics company, that works with many household names, such as McLaren, Tesco, Harrods, Stobarts, JCB, Dominos… To name a few! A Day in the Life of… Don't just take our word for it, read Jack's story which gives a glimpse into the training, typical day and highlights being an Engineer at Microlise. You can read Jack's blog via the link here! What will you be doing? Ensure Microlise product portfolio is full integrated into our customer's assets Timely visits to customer sites to undertake the installation, servicing and continued support of our product suite Completing survey visits and identifying suitable solutions Completing QA (quality assurance) visits on Microlise products and peripherals in customer assets Inventory management Responsible for the upkeep and safety of your vehicle and all provided tools /equipment Liaise with customers at all levels Provide support to your peers and contractor resource where required Ensure administration is concise, accurate and professional Adhere to all internal process and procedures Report on statistical information when required What are we looking for? Demonstrable experience in a similar role; auto electrics and/or telematics Full UK Driving Licence Experience of working to Service Level Agreements and Operational Schedules Understanding of vehicle wiring diagrams and ability to interpret these Evidence of strong customer service skills with a professional approach Good interpersonal and communication skills, with the ability to adjust style to relevant audiences Be able to work autonomously, solve problems independently and adhere to agreed processes Take pride in what you do ensuring quality and accuracy Valid Passport for travel Working Pattern This is a field based role working remotely on our customer sites. Our Field Engineers work shifts on a rota basis, including weekends, to suit the requirements of our customers. Full details regarding our working patterns can be discussed at the interview stage, and upon application you will be provided with an example of a typical rota. What's in it for you? Full support and training to ensure you are well equipped to succeed in your role Company vehicle, shift allowance, laptop, mobile phone and tools provided Private medical insurance with Vitality Health including rewards for members such as: Apple Watch, discounted gym membership and many more 33 days holiday, including bank holidays, increasing year on year to 38 days, then further increases with length of services Life Assurance, 4 times your annual salary Free Costco membership, 20% off EE mobile and line rental, and other discounts with Reward Gateway Invested in employee health and well-being with over 20 mental health first aiders in the business Employee Assistance Programmes Great staff extras: Easter eggs, yearly BBQ, Christmas gifts, annual staff awards and many more incentives Great Place to Work™ certified – We have been recognised by the global authority on workplace culture, so come be a part of our success Best Workplace in the UK™ for Development, Technology, Wellbeing and Women Recruitment Process For successful candidates, interviews will take place whilst the advert is still live; so don't delay getting your application in! Please note: The successful candidate's job title will be Technical Hardware Engineer in line with our organisational structure. TPBN1_UKTJ

Infrastructure and Active Directory Engineer – DV Cleared Location: Reading Duration: Initial 6 months (very likely to extend) Candidates must hold active DV Clearence We are recruiting an experienced Infrastructure and Active Directory Engineer to join a secure, business-critical IT delivery team. This is a broad generalist role covering Windows and Linux servers, virtualisation, storage, backup and monitoring, alongside hands-on Microsoft Active Directory support. The estate combines established platforms that must be kept secure and supported with newer technology being introduced through modernisation and obsolescence work, The role is predominantly third-line, acting as a technical escalation point for complex incidents, problems, changes and project work, with some second-line activity as required. Candidates should bring strong depth in either core infrastructure or Active Directory, sound practical capability across the other, and the confidence to own issues and explain risks and options clearly to technical and non-technical stakeholders. This is a hands-on, all-round role covering Windows and Linux servers, virtualisation, storage, backup and monitoring, as well as Microsoft Active Directory. Most of the work is third line, so you will be required to handle the more complex issues, changes and project work, with some second-line support when needed. You should be strong in either infrastructure or Active Directory and comfortable working in the other, with some Linux and networking knowledge. • Act as a third-line escalation point for infrastructure and Active Directory services, owningcomplex incidents through to resolution and supporting second-line incidents and requests as required. • Administer and maintain on-premises Active Directory, Group Policy, DNS, DHCP, replication, trusts, authentication, Windows PKI and privileged access, including health checks and remediation. • Support Windows Server 2016 onwards and RHEL/Linux servers, VMware vSphere and Hyper-V virtualisation, clustered and HCI platforms, SAN/NAS storage, enterprise backup and monitoring, including capacity, resilience and disaster recovery. • Carry out builds, patching (including via SCCM and WSUS), upgrades, vulnerability remediation and hardware and operating system lifecycle work, managing ageing and out-of-support platforms and identifying security and obsolescence risks early. • Support modernisation and obsolescence projects, including moves to Windows Server 2022/2025, current RHEL, VMware and Hyper-V/Azure Local releases and modern HCI and storage, applying tiered administration and secure-by-design principles. • Investigate recurring or high-impact faults across connected layers, leading root cause analysis and corrective actions. • Plan and deliver changes and project work, including testing, implementation, back-out planning and service transition. • Perform datacentre activities in controlled environments, including hardware installation, cabling and health checks. Maintain technical documentation and records, working within ITIL Incident, Problem, Change and Configuration Management processes. • Drive automation and continual improvement and share knowledge with colleagues and second-line teams. • Participate in planned out-of-hours work or incident support where required by the service. SSENTIAL EXPERIENCE AND CAPABILITIES • Proven third-line infrastructure engineering experience in a medium or large enterprise environment, with the flexibility to support second-line work. • Strong depth in either core infrastructure or Active Directory, with sound hands-on capabilityacross the other. • Hands-on experience of Windows Server 2016 onwards, VMware vSphere (ESXi and vCenter) and/or Hyper-V, clustering or HCI, SAN/NAS storage, enterprise backup and disaster recovery, with familiarity with SCCM, WSUS and SCO M. • Working knowledge of Red Hat Enterprise Linux or comparable distributions, including routine administration, patching and troubleshooting. • A structured approach to troubleshooting, separating root cause from symptoms and coordinating resolution across teams. • Working knowledge of networking fundamentals, including TCP/IP, DNS, firewalls, ports and routing. • Experience in secure, controlled environments with formal access, audit and change requirements, using ITIL-aligned processes. • Clear documentation, communication and stakeholder skills, with the ability to work independently and prioritise competing demands. • Current DV clearance. Candidates who do not already hold valid DV clearance will not meet the requirement. TPBN1_UKTJ

Account Manager / Customer Success Manager Want a customer-facing technology role where you can genuinely own relationships, solve problems and help accounts grow? Join our team at Sagoss, a fast-moving, product-led business where your ideas, judgement and customer focus can make a visible difference. If you've also worked in the following roles, we'd also like to hear from you: Client Services Manager, Client Relationship Manager, Customer Account Manager, Key Account Manager, Customer Relationship Manager, Client Success Manager, Customer Retention Manager, Customer Experience Manager, Customer Engagement Manager SALARY: £35,000 to £40,000 per annum + Benefits LOCATION: Henley-on-Thames, Oxfordshire JOB TYPE: Full-Time, Permanent JOB OVERVIEW This is a fantastic opportunity for an Account Manager / Customer Success Manager who loves building strong relationships, getting stuck into customer challenges and seeing their work make a real commercial impact. No two days need feel the same. The Account Manager / Customer Success Manager will move between customer meetings, software problem-solving, training, projects, renewals and identifying ways to help accounts get even more value. Working closely with technical, support, engineering, development, project, sales and finance teams, the Account Manager / Customer Success Manager will have real visibility across the business and the opportunity to deepen their software and technical knowledge. ABOUT US Established in 2006, Sagoss Group is a growing, entrepreneurial group made up of three distinctive businesses: Sagoss, Accellerate and Healthium Clinics. Each business operates in a specialist market, creating a varied and commercially interesting environment where finance plays an important role in supporting growth, control and future scalability. Sagoss is a UK technology business delivering intelligent parking and transport solutions through an integrated platform that combines software, ANPR, payment systems, customer portals and connected hardware. Accellerate is a medical market-access consultancy that helps healthcare technologies and products move successfully through market-access strategy, regulatory compliance, health economics and related commercial support. Healthium Clinics is a private, CQC-registered medical and aesthetic clinic in Henley-on-Thames, offering private healthcare, wellness, skin and non-surgical services in a discreet, patient-focused setting. DUTIES Your duties as the Account Manager / Customer Success Manager include: Build Trusted Customer Relationships: Take ownership of a portfolio of key accounts, develop strong relationships at operational and senior level, run regular reviews and understand each customer's objectives and future plans Own Customer Challenges: Become the person customers can rely on when something needs fixing, investigating issues through software, data and logs and coordinating the right internal teams through to resolution Grow Customer Accounts: Spot genuine opportunities to add value through additional services, modules, hardware, sites and upgrades while supporting renewals and annual price reviews Become a Product Expert: Develop strong knowledge of the software platform and connected hardware, confidently demonstrate its capabilities and help customers get the most from the technology Turn Insight into Action: Translate customer requirements clearly for technical and development teams, share market intelligence and identify recurring issues or opportunities for improvement Deliver Training and Onboarding: Provide engaging on-site and online customer training, support successful onboarding and coordinate webinars, user groups and product update sessions Keep Projects Moving: Work with project and field engineering teams on installations and upgrades, keeping customers informed and ensuring smooth handovers Maintain Clear Account Visibility: Keep CRM records, meeting notes, actions, account health information and pipeline data accurate and up to date Represent the Business: Travel regularly across the UK to meet customers, visit sites and build strong face-to-face relationships CANDIDATE REQUIREMENTS ESSENTIAL Previous account management, customer success or client-facing support experience within an IT or software environment Strong problem-solving skills with a track record of taking ownership of customer issues through to resolution Software-savvy and highly IT-literate, with confidence using Microsoft 365 including Word, Excel, Outlook and Teams Experience identifying and closing upsell or renewal opportunities Experience delivering customer training both on site and online Excellent written and verbal communication and presentation skills Highly organised with the ability to manage changing workloads and priorities Full UK driving licence and willingness to travel regularly to customer sites Positive, resilient and accountable approach with the confidence to handle challenging conversations professionally Curious, proactive and collaborative mindset with a genuine desire to improve the customer experience DESIRABLE Understanding of computer code, databases, APIs or SQL sufficient to investigate issues and communicate confidently with developers Experience in parking, transport, local authority or NHS environments Experience using CRM and support ticketing systems Experience coordinating projects, installations or system upgrades Knowledge of SaaS contracts, service levels and renewals BENEFITS Joining Sagoss means becoming part of an established, award-winning technology business that is continuing to grow and innovate. We invest in structured onboarding, practical training and ongoing development, giving employees the opportunity to build their expertise, take ownership of their work and progress within the company. Our team works collaboratively across technology, operations, customer service and field engineering to deliver solutions used by public and private-sector organisations. Benefits include private medical insurance and birthday leave. Competitive salary, reviewed in line with performance and business needs NO AGENCIES PLEASE HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. JOB REF: AWDO-P15371 This job is being advertised by AWD online on behalf of Sagoss Group AWD-IN-SPJ TPBN1_UKTJ

At Dexory, we're developing advanced software powered by cutting-edge robots that are transforming the very face of global logistics. With infectious enthusiasm, our unique blend of disciplines work in harmony to produce results at pace. From hardware and manufacturing to software, AI and commercial, we're one team – one heart – that beats, learns and grows together. We're only interested in the best ideas, no matter where they're from. We're doers. Game-changers. Out-of-the-box thinkers who put merit before all else. A group of ambitious and disciplined individuals who are passionate about turning theory into rubber, metal and results. Build the function that knows what the fleet is doing, what it will do next, and what to fix first. • Define and own fleet health: what we measure, what good looks like, and how it is reported., • Investigate fleet-wide behaviour from logs and telemetry: spot a warning appearing on a handful of robots, work out which release or configuration change introduced it, quantify how many robots are exposed and how badly, and judge the real operational severity., • Own the fleet's diagnostic data capture — work with other teams for rosbag recording rules, log pipelines, telemetry coverage. If a failure cannot be investigated because the data was not recorded, that is a reliability defect., • Own alert thresholds, alert quality, resolution and escalation;, • Develop pre-failure detection of robot subsystems, • Own fleet configuration management: baselines, drift detection, change visibility, and driving the configuration itself towards something manageable rather than hand-tuned per robot., • Own fleet data quality and the hardware health foundation: component-level tracking, and a monthly fleet health report to Service and Engineering., • preventive maintenance intervals set from fleet data,, • Work alongside V&V on release candidate analysis: interpret what RC robots are showing, catch regressions before wide rollout, and recommend proceed, hold or roll back. V&V owns the release decision; you supply the evidence behind it., • Build the top-failure-modes register and drive the highest-impact items to resolution with Engineering., • Report fleet health to the interested teams (Service, Engineering, Software)., • Hire, coach and grow the team; stay hands-on with data and robots., • Hire, coach and grow the team; stay hands-on with data and robots., • Substantial engineering experience in reliability, SRE, platform operations, robotics operations or a strongly data-driven engineering role., • Fluency with telemetry and observability: Grafana or similar, time-series data, SQL, Python., • The analytical judgement to separate signal from noise, and to tell the difference between a robot that is unusual and a robot that is failing., • Enough systems depth to be credible with engineers: Linux, logs, distributed systems, and ideally ROS or another robotics stack., • The ability to argue a case from evidence and hold a position with engineering and hardware teams., • The discipline to protect proactive work from reactive pull., • Genuine interest in growing into a leadership role - a strong engineer who wants to build and lead a team, not a manager who has stopped building. Trustworthy baseline metrics that people quote in meetings; an alert set with a low false-positive rate; diagnostic data capture good enough that no significant incident goes unexplained for want of logs; at least two recurring failure modes permanently eliminated; fleet configuration visible and drift detectable; and one or two reliability engineers hired and productive. Starting from the interview process and continuing into your career with us, you will be working by our four Operating Principles: • Performance: High standards, outstanding results,, • Impact: Big challenges, bigger results, • Commitment: All in, every time, • One team: One mission, shared success Joining our team and company isn't just about expertise; it's about embracing uncertainty with ambition. We're crafting world-changing solutions, fueled by a passion to redefine what's possible. We will look for you to help create and shape the future of logistics solutions through our products, our culture and our shared vision. You will also receive: • Private healthcare via Bupa with 24/7 medical helpline, • Life insurance, • Income protection, • Pension: 4+% employee with option to opt into salary exchange, 5% employer, • Employee Assistance Programme - mental wellbeing, financial and legal advice/support, • 25 holidays per year, • Full meals onsite in Wallingford, • Fun team events on and offsite, snacks of all kinds in the office Dexory provides equal employment opportunities to all employees and applicants for employment. It prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training #J-18808-Ljbffr

Back-End Engineer (Go) - Connected Sports Tech | Reading, hybrid (1 day/week) This sports-tech scale-up is changing how a global sport is played. It combines camera-based hardware with an app that tracks play automatically and powers online matches, live stats and training. The platform has passed 200,000 users, up from tens of thousands a year ago, and is aiming for the low millions. The business sits within a heritage sports brand that was recently acquired by a leading private equity firm and is now in a new phase of growth. The engineering team is around 15 people and works like a startup, with the backing of a much bigger business. Every match played and every stat collected goes through the back end. You'll build and maintain the Go services and databases behind the core product. You'll sit in a cross-functional team that works closely with the hardware engineers, and you'll help shape the back-end architecture as the product scales. • Build and maintain REST services in Go, • Design and evolve the SQL data model behind them, • Refine user stories with product and integrate APIs with the front-end engineers, • Write automated tests, then build and deploy to production, • Monitor performance and quality in production alongside ops, • Share knowledge through code reviews and pair programming, • 4+ years' commercial experience in Go, or a similar language such as Kotlin or Rust, • Back-end experience on a high-volume, consumer-facing product, • Experience designing and implementing REST APIs, • Strong SQL and PostgreSQL, • Automated testing and CI/CD experience, • Comfort with startup pace: priorities that shift, freedom to shape the work and a "figure it out" attitude Nice to have: Kubernetes, Grafana/Loki observability, Swift or Kotlin for mobile, an understanding of modern front-end development, and a background in sport or gaming. A chance to work at the cutting edge of technology in sport, on a product its users love Lots of autonomy, and you'll learn from an experienced CTO, CPO and technology investors Up to 20% bonus, a pension (3% employer contribution), private healthcare and a cycle-to-work scheme, with salary sacrifice for EVs coming soon Office travel is expensed, you spec your own dev machine, and you get access to 60+ co-working spaces nationwide #J-18808-Ljbffr

NewOrbit builds satellites that fly in very low Earth orbit, below 300 km, along with the electric propulsion that keeps them there. Flying closer to Earth means sharper imagery from smaller optics, and an orbit that cleans itself: our satellites de-orbit within a month at end of life, leaving no debris. Our AURA family of RF gridded ion thrusters powers our own NEO-1 satellite, with first flight planned for Q3 2028, and is also offered to other operators. Electric propulsion is what lets our satellites hold very low orbits, and our AURA RF gridded ion thruster is at the centre of it. The AIT Systems Integration Engineer owns functional and system-level testing of our spacecraft and the verification tracking for each satellite campaign. Working within the Assembly, Integration & Test (AIT) team, you will take the satellite from integrated subsystems to a flight-ready, fully verified vehicle. You will bridge systems engineering, subsystem teams and the AIT Engineering Functions. You will turn requirements into test procedures, run and lead test campaigns, and make sure every requirement is closed out with traceable evidence before launch. The role suits someone who knows SmallSat development approaches, is hands-on with Hardware and Ground Support Equipment (GSE), and understands how satellite subsystems behave together. • Own the functional and system test programme for the spacecraft, from unit-level acceptance, integration, thought to whole System End-to-End Testing., • Write, review and run test specifications and procedures, including basic functional testing, FDIR, end-to-end tests and mission/day-in-the-life simulations., • Lead test readiness reviews and test review boards, and sign off test reports., • Run tests before, during and after environmental campaigns (vibration, thermal vacuum, EMC) to confirm spacecraft health., • Diagnose anomalies, raise and track Non-Conformance Reports (NCRs), and drive root-cause investigations with subsystem engineers., • Develop and maintain automated test scripts and telemetry/telecommand (TM/TC) databases used for testing., • Own the verification matrix (VCRM) for the satellite campaign, mapping each requirement to its method: test, analysis, inspection or review of design., • Plan the verification approach with Systems Engineering and keep it current through the campaign., • Collect and link verification evidence, and report close-out status against milestones., • Prepare verification data packages for key reviews (e.g. CDR, TRR, QR, PSR/FAR) and customer acceptance., • Specify, integrate and validate Electrical GSE, including power supplies, battery simulators, RF test sets, umbilicals and break-out boxes., • Maintain the spacecraft checkout software and ground segment interfaces used on the AIT floor., • Make sure GSE is calibrated, configuration-controlled and safe for use with flight hardware., • Support subsystem and payload integration, including electrical interface checks, harness verification and safe-to-mate procedures., • Plan and schedule system test activities within the wider AIT campaign., • Support launch campaign activities, including transport, launch site checkout and launch vehicle interface testing., • Work to cleanroom, ESD and flight hardware handling standards, and contribute to lessons learned for future missions., • Degree in Aerospace, Electronic, Electrical or Systems Engineering, Physics, or equivalent experience., • Typically 3+ years in spacecraft AIT, systems integration or test engineering., • Hands-on experience with functional and system-level testing of satellites or space subsystems., • Familiarity with SmallSat development approaches: agile, rapid iteration, protoflight models, and pragmatic use of COTS components., • Working knowledge of satellite subsystems: EPS, OBC/C&DH, ADCS, communications (TT&C and payload RF), propulsion, thermal, structures and payloads., • Experience using and setting up GSE, including EGSE, checkout systems and RF test equipment., • Experience with requirements verification and maintaining a verification matrix through to close-out., • Comfortable with lab equipment: oscilloscopes, power supplies, multimeters, spectrum analysers, logic analysers., • Familiarity with common spacecraft interfaces and protocols (e.g. CAN, I2C, SPI, RS-422, SpaceWire, CCSDS)., • Clear technical writing for procedures, test reports and NCRs., • End-to-end involvement in at least one satellite mission that reached launch., • Test automation and scripting in Python or similar, and experience with spacecraft control or checkout software (e.g. OpenC3/COSMOS, Yamcs, SCOS-2000)., • Experience planning or supporting environmental test campaigns (vibration, TVAC, EMC)., • Knowledge of ECSS standards (e.g. ECSS-E-ST-10-02 Verification, ECSS-E-ST-10-03 Testing) or NASA equivalents., • Requirements management tools (e.g. DOORS, Jama, Polarion, Valispace)., • Launch campaign experience at a launch site., • Cleanroom and ESD-certified flight hardware handling., • Eligibility for UK security clearance, or the ability to obtain it, if required by the programme., • Takes ownership: drives tests and verification to close-out without waiting to be asked., • Methodical and detail-focused, with a strong sense of safety and quality around flight hardware., • Calm, structured problem-solver when anomalies appear under schedule pressure., • Communicates clearly across disciplines, from subsystem engineers to programme managers and customers., • Comfortable in a fast-paced SmallSat environment, balancing rigour with pace., • Willing to work flexibly during test and launch campaigns, including occasional travel., • Pioneering space technology - Your work on our RF gridded ion thrusters and VLEO satellite platform will redefine satellite operations and challenge traditional LEO., • Ownership and impact - You'll have a level of ownership that's rare in the space industry, and you'll take part in the full lifecycle of satellite technology., • Equity and competitive salary - Alongside a competitive salary you receive a company ownership stake, so you share in the technology you help build and in our collective success., • Comprehensive benefits - Private health insurance with dental and optical cover, and annual health check-ups., • Visa sponsorship and relocation support - We sponsor visas and provide relocation support for candidates moving to join us. #J-18808-Ljbffr

We hire those that seek to innovate across people, process and technology. Join our global workforce, visualise the future and strive for success. Our engineering campus and corporate offices in the UK and US are optimal environments for ideas and innovation to flourish. ALL.SPACE, has developed a smart terminal, capable of linking with all satellites, all networks, in all orbits, all at once. Our ground-breaking software-defined service enablement platform integrates intelligent routing, edge computing and on-demand services to deliver unprecedented network resilience and application performance. Our terminal designs operate as fully electronic beam steering systems. Our IP has applications across a wide range of market sectors including aeronautical, land mobile, maritime, and 5G. It provides broadband, multi-beam, two-way communications with dynamic tracking of geostationary and non-geostationary satellites or terrestrial nodes. We are looking for world class talent to join our high-performing teamworking on cutting edge technologyin the satellite communications industry. We stand by our company values;INTEGRITY, INNOVATION & EXECUTION EXCELLENCE– giving you the opportunity to build your career in an environment where we encourage crisp decision-making, challenging the status-quo, championing your beliefs and ideas, sharing successes (and learning from failures) and working collaboratively with your fellow team members. ALL.SPACE is committed to practicing and promoting diversity, inclusion and equality in the workplace. We aim to lead by example by making satellite communications a more inviting and accessible industry for all. Visit www.all.space to learn more. • Perform requirements analysis; engage with internal and external stakeholders to understand technical functionality required to meet customer needs., • Complete architecture and design documentation for new software features., • Deliver high-quality, tested software features for an embedded real-time system, using C++., • Implement automated unit and integration tests., • Test and debug functionality in simulation and on target hardware., • Lead the investigation and timely resolution of software issues., • Employ industry standard design patterns and practices to ensure appropriate quality, security, modifiability, and extensibility., • Work within the team’s Agile framework, pro-actively contributing to the software development life cycle process., • Take technical ownership of software features; assisting in the planning and execution of work against an agreed roadmap., • Present reports on results and progress to stakeholders as required., • Mentor junior engineers, developing their technical skills and championing best practice., • Highly skilled in in C++ development on embedded systems., • Demonstrated success in delivery of reliable, real-time embedded functionality., • Full lifecycle development experience – design, develop, test, maintain., • Good experience of Linux and FreeRTOS operating systems., • Excellent understanding of physical interfaces such as Serial, Ethernet, SPI, CAN, etc., • Demonstrated skills in hardware debugging and performance characterisation., • Excellent understanding of Source Code Management (git) and CI/CD pipelines., • Generation of appropriate documentation (Jira, Confluence)., • Perform peer reviews and test of other developers’ work., • Effective collaboration in high-pace agile team., • Excellent self-organizational skills and attention to detail., • Problem-solver and collaborative team member. Due to the need to control and debug on target hardware, this role requires working at ALL.SPACE’s Reading sites. Could be hybrid role, working on-site some of the time. • Competitive Salary, • Contributory Pension Scheme, • 25 days Annual Leave + Public Holidays, • Cycle-to-Work Scheme (Salary Sacrifice), • Car Scheme (Salary Sacrifice), • Free On-Site Gym, • Employee Assistance Programme, • Discounts Platform #J-18808-Ljbffr

We hire those that seek to innovate across people, process and technology. Join our global workforce, visualise the future and strive for success. Our engineering campus and corporate offices in the UK and US are optimal environments for ideas and innovation to flourish. ALL.SPACE, has developed a smart terminal, capable of linking with all satellites, all networks, in all orbits, all at once. Our ground-breaking software-defined service enablement platform integrates intelligent routing, edge computing and on-demand services to deliver unprecedented network resilience and application performance. Our terminal designs operate as fully electronic beam steering systems. Our IP has applications across a wide range of market sectors including aeronautical, land mobile, maritime, and 5G. It provides broadband, multi-beam, two-way communications with dynamic tracking of geostationary and non-geostationary satellites or terrestrial nodes. We are looking for world class talent to join our high-performing teamworking on cutting edge technologyin the satellite communications industry. We stand by our company values;INTEGRITY, INNOVATION & EXECUTION EXCELLENCE– giving you the opportunity to build your career in an environment where we encourage crisp decision-making, challenging the status-quo, championing your beliefs and ideas, sharing successes (and learning from failures) and working collaboratively with your fellow team members. ALL.SPACE is committed to practicing and promoting diversity, inclusion and equality in the workplace. We aim to lead by example by making satellite communications a more inviting and accessible industry for all. Visit www.all.space to learn more. • Perform requirements analysis; engage with internal and external stakeholders to understand technical functionality required to meet customer needs., • Complete architecture and design documentation for new software features., • Deliver high-quality, tested software features for an embedded real-time system, using C++., • Implement automated unit and integration tests., • Test and debug functionality in simulation and on target hardware., • Lead the investigation and timely resolution of software issues., • Employ industry standard design patterns and practices to ensure appropriate quality, security, modifiability, and extensibility., • Work within the team’s Agile framework, pro-actively contributing to the software development life cycle process., • Take technical ownership of software features; assisting in the planning and execution of work against an agreed roadmap., • Present reports on results and progress to stakeholders as required., • Mentor junior engineers, developing their technical skills and championing best practice., • Highly skilled in in C++ development on embedded systems., • Demonstrated success in delivery of reliable, real-time embedded functionality., • Full lifecycle development experience – design, develop, test, maintain., • Good experience of Linux and FreeRTOS operating systems., • Excellent understanding of physical interfaces such as Serial, Ethernet, SPI, CAN, etc., • Demonstrated skills in hardware debugging and performance characterisation., • Excellent understanding of Source Code Management (git) and CI/CD pipelines., • Generation of appropriate documentation (Jira, Confluence)., • Perform peer reviews and test of other developers’ work., • Effective collaboration in high-pace agile team., • Excellent self-organizational skills and attention to detail., • Problem-solver and collaborative team member. Due to the need to control and debug on target hardware, this role requires working at ALL.SPACE’s Reading sites. Could be hybrid role, working on-site some of the time. • Competitive Salary, • Contributory Pension Scheme, • 25 days Annual Leave + Public Holidays, • Cycle-to-Work Scheme (Salary Sacrifice), • Car Scheme (Salary Sacrifice), • Free On-Site Gym, • Employee Assistance Programme, • Discounts Platform #J-18808-Ljbffr

CompanyNewOrbit builds satellites that fly in very low Earth orbit, below 300 km, along with the electric propulsion that keeps them there. Flying closer to Earth means sharper imagery from smaller optics, and an orbit that cleans itself: our satellites de-orbit within a month at end of life, leaving no debris. Our AURA family of RF gridded ion thrusters powers our own NEO-1 satellite, with first flight planned for Q3 2028, and is also offered to other operators. RoleElectric propulsion is what lets our satellites hold very low orbits, and our AURA RF gridded ion thruster is at the centre of it. As Electric Propulsion Engineer, you own the design of that thruster: you calculate it, design it, build it, test it in our own vacuum facilities and feed what you learn straight into the next iteration. You own the testing of your own designs, and your results decide what flies. • Own the design of our RF gridded ion thruster and its performance calculations, from concept to flight configuration., • Iterate rapidly to support NEO-1 and our customer thruster deliveries., • Work with mechanical, electrical and control engineers on each new iteration of the ion propulsion system., • Design and build the test rigs and equipment for propulsion testing., • Assemble and operate test hardware, electronics and vacuum facilities., • Run electric propulsion tests on your own designs and analyse the results., • Plan and run the test campaigns for your own designs., • Turn test results into design changes, then re-test., • Document every test configuration and result so it gives traceable evidence for system verification and qualification., • Strong knowledge of RF gridded ion thrusters, including RF plasma generation, ion optics and neutralisation., • Hands-on electric propulsion testing, ideally with RF generators, high-voltage power supplies and thrust balances., • Experience with vacuum systems (pumps, gauges, valves), power supplies, fluid management (high-pressure gas tanks, mass flow controllers) and data acquisition., • Solid grounding in plasma physics, modelling, diagnostics and ionisation processes., • Willingness to design, build and test your own hardware, and to work extended hours on-site., • Experience taking a thruster from design through qualification to flight hardware., • Scripting for data analysis and test automation (Python or MATLAB)., • Experience running thrusters on more than one propellant, such as xenon, krypton or air. Pioneering space technology - Your work on our RF gridded ion thrusters and VLEO satellite platform will redefine satellite operations and challenge traditional LEO. • Ownership and impact - You'll have a level of ownership that's rare in the space industry, and you'll take part in the full lifecycle of satellite technology., • Equity and competitive salary - Alongside a competitive salary you receive a company ownership stake, so you share in the technology you help build and in our collective success., • Comprehensive benefits - Private health insurance with dental and optical cover, and annual health check-ups., • Hybrid working - One dedicated remote day per week., • Visa sponsorship and relocation support - We sponsor visas and provide relocation support for candidates moving to join us. #J-18808-Ljbffr

NewOrbit builds satellites that fly in very low Earth orbit, below 300 km, along with the electric propulsion that keeps them there. Flying closer to Earth means sharper imagery from smaller optics, and an orbit that cleans itself: our satellites de-orbit within a month at end of life, leaving no debris. Our AURA family of RF gridded ion thrusters powers our own NEO-1 satellite, with first flight planned for Q3 2028, and is also offered to other operators. Electric propulsion is what lets our satellites hold very low orbits, and our AURA RF gridded ion thruster is at the centre of it. This is a first full-time engineering role on the NEO-1 satellite. You will design satellite hardware and help keep the satellite's full CAD assembly organised as the design matures, learning from our lead designer and working in a small, multidisciplinary team. You will take ownership of real parts early, translate requirements into manufacturable designs and support their validation through prototyping and environmental testing. • Design and develop mechanical hardware for the satellite, such as brackets, panels, component mounts, thermal-control hardware and cable and harness routing, with guidance from the lead designer., • Work in the satellite's large 3D CAD assembly alongside the wider design team, learning how to keep interfaces, configurations and revisions in step as several designers work in the same model., • Support assembly configuration, PLM data (3DEXPERIENCE ('3DX') or similar), bills of materials and engineering change control (ECO/ECR/ECN), so that models, drawings and interfaces stay consistent as changes are released., • Run interference and clash checks and help maintain the digital mock-up, working with each subsystem owner to allocate space and resolve conflicts., • Produce dimensioned, manufacturing-ready drawings using GD&T, with review from senior engineers., • Support design reviews (PDR and CDR) and qualification, working with structural and thermal engineers., • Work with manufacturers and suppliers to make designs easier to build, and to balance cost, mass and reliability., • Support prototype builds, integration and environmental test campaigns, iterating designs based on results., • Collaborate with electrical, software, systems and thermal engineers to integrate mechanical components into the satellite platform., • Bachelor's or master's degree in mechanical, aerospace or a related engineering discipline, completed or completing very soon., • Hands-on 3D CAD skills from university projects, a placement or an internship (SolidWorks preferred; CATIA, NX or Creo also considered)., • Working knowledge of GD&T and experience producing engineering drawings, including from coursework or a team project., • Solid grounding in mechanical design principles, materials and thermal management, with a working understanding of structural mechanics., • Evidence of designing, building and testing something real, such as a placement project, Formula Student, a UAV, or a rocketry or satellite team, including troubleshooting and iteration., • Clear communicator who is comfortable explaining and defending design decisions, and open to feedback and challenge in a fast-moving team., • A placement, internship or year in industry in aerospace, space, motorsport or another high-reliability field., • Experience of several people working in one CAD assembly, for example in a Formula Student or university team, including how files and revisions were controlled., • Exposure to PLM or PDM systems (for example 3DEXPERIENCE ('3DX'), Windchill, Teamcenter, ENOVIA or SolidWorks PDM) or to formal engineering change processes (ECO/ECR/ECN)., • Experience of design reviews, documented requirements and standards., • Satellite, CubeSat or rocketry project experience, including hardware that has launched., • Basic FEA familiarity and exposure to manufacturing processes., • Pioneering space technology - Your work on our RF gridded ion thrusters and VLEO satellite platform will redefine satellite operations and challenge traditional LEO., • Ownership and impact - You'll have a level of ownership that's rare in the space industry, and you'll take part in the full lifecycle of satellite technology., • Equity and competitive salary - Alongside a competitive salary you receive a company ownership stake, so you share in the technology you help build and in our collective success., • Comprehensive benefits - Private health insurance with dental and optical cover, and annual health check-ups., • Visa sponsorship and relocation support - We sponsor visas and provide relocation support for candidates moving to join us. #J-18808-Ljbffr

NewOrbit builds satellites that fly in very low Earth orbit, below 300 km, along with the electric propulsion that keeps them there. Flying closer to Earth means sharper imagery from smaller optics, and an orbit that cleans itself: our satellites de-orbit within a month at end of life, leaving no debris. Our AURA family of RF gridded ion thrusters powers our own NEO-1 satellite, with first flight planned for Q3 2028, and is also offered to other operators. Electric propulsion is what lets our satellites hold very low orbits, and our AURA RF gridded ion thruster is at the centre of it. The AIT Systems Integration Engineer owns functional and system-level testing of our spacecraft and the verification tracking for each satellite campaign. Working within the Assembly, Integration & Test (AIT) team, you will take the satellite from integrated subsystems to a flight-ready, fully verified vehicle. You will bridge systems engineering, subsystem teams and the AIT Engineering Functions. You will turn requirements into test procedures, run and lead test campaigns, and make sure every requirement is closed out with traceable evidence before launch. The role suits someone who knows SmallSat development approaches, is hands-on with Hardware and Ground Support Equipment (GSE), and understands how satellite subsystems behave together. Own the functional and system test programme for the spacecraft, from unit-level acceptance, integration, thought to whole System End-to-End Testing. Write, review and run test specifications and procedures, including basic functional testing, FDIR, end-to-end tests and mission/day-in-the-life simulations. Lead test readiness reviews and test review boards, and sign off test reports. Run tests before, during and after environmental campaigns (vibration, thermal vacuum, EMC) to confirm spacecraft health. Diagnose anomalies, raise and track Non-Conformance Reports (NCRs), and drive root-cause investigations with subsystem engineers. Develop and maintain automated test scripts and telemetry/telecommand (TM/TC) databases used for testing. Own the verification matrix (VCRM) for the satellite campaign, mapping each requirement to its method: test, analysis, inspection or review of design. Plan the verification approach with Systems Engineering and keep it current through the campaign. Collect and link verification evidence, and report close-out status against milestones. Prepare verification data packages for key reviews (e.g. CDR, TRR, QR, PSR/FAR) and customer acceptance. Specify, integrate and validate Electrical GSE, including power supplies, battery simulators, RF test sets, umbilicals and break-out boxes. Maintain the spacecraft checkout software and ground segment interfaces used on the AIT floor. Make sure GSE is calibrated, configuration-controlled and safe for use with flight hardware. Support subsystem and payload integration, including electrical interface checks, harness verification and safe-to-mate procedures. Plan and schedule system test activities within the wider AIT campaign. Support launch campaign activities, including transport, launch site checkout and launch vehicle interface testing. Work to cleanroom, ESD and flight hardware handling standards, and contribute to lessons learned for future missions. Degree in Aerospace, Electronic, Electrical or Systems Engineering, Physics, or equivalent experience. Typically 3+ years in spacecraft AIT, systems integration or test engineering. Hands-on experience with functional and system-level testing of satellites or space subsystems. Familiarity with SmallSat development approaches: agile, rapid iteration, protoflight models, and pragmatic use of COTS components. Working knowledge of satellite subsystems: EPS, OBC/C&DH, ADCS, communications (TT&C and payload RF), propulsion, thermal, structures and payloads. Experience using and setting up GSE, including EGSE, checkout systems and RF test equipment. Experience with requirements verification and maintaining a verification matrix through to close-out. Comfortable with lab equipment: oscilloscopes, power supplies, multimeters, spectrum analysers, logic analysers. Familiarity with common spacecraft interfaces and protocols (e.g. CAN, I2C, SPI, RS-422, SpaceWire, CCSDS). Clear technical writing for procedures, test reports and NCRs. End-to-end involvement in at least one satellite mission that reached launch. Test automation and scripting in Python or similar, and experience with spacecraft control or checkout software (e.g. OpenC3/COSMOS, Yamcs, SCOS-2000). Experience planning or supporting environmental test campaigns (vibration, TVAC, EMC). Knowledge of ECSS standards (e.g. ECSS-E-ST-10-02 Verification, ECSS-E-ST-10-03 Testing) or NASA equivalents. Requirements management tools (e.g. DOORS, Jama, Polarion, Valispace). Launch campaign experience at a launch site. Cleanroom and ESD-certified flight hardware handling. Eligibility for UK security clearance, or the ability to obtain it, if required by the programme. Takes ownership: drives tests and verification to close-out without waiting to be asked. Methodical and detail-focused, with a strong sense of safety and quality around flight hardware. Calm, structured problem-solver when anomalies appear under schedule pressure. Communicates clearly across disciplines, from subsystem engineers to programme managers and customers. Comfortable in a fast-paced SmallSat environment, balancing rigour with pace. Willing to work flexibly during test and launch campaigns, including occasional travel. Pioneering space technology - Your work on our RF gridded ion thrusters and VLEO satellite platform will redefine satellite operations and challenge traditional LEO. Ownership and impact - You'll have a level of ownership that's rare in the space industry, and you'll take part in the full lifecycle of satellite technology. Equity and competitive salary - Alongside a competitive salary you receive a company ownership stake, so you share in the technology you help build and in our collective success. Comprehensive benefits - Private health insurance with dental and optical cover, and annual health check-ups. Hybrid working - One dedicated remote day per week. Visa sponsorship and relocation support - We sponsor visas and provide relocation support for candidates moving to join us. #J-18808-Ljbffr

At Dexory, we're developing advanced software powered by cutting-edge robots that are transforming the very face of global logistics. With infectious enthusiasm, our unique blend of disciplines work in harmony to produce results at pace. From hardware and manufacturing to software, AI and commercial, we're one team – one heart – that beats, learns and grows together. We're only interested in the best ideas, no matter where they're from. We're doers. Game-changers. Out-of-the-box thinkers who put merit before all else. A group of ambitious and disciplined individuals who are passionate about turning theory into rubber, metal and results. Turn fleet data into fixes. • Build and maintain dashboards, metrics and alerts for robot and fleet health., • Analyse incident and telemetry data to find recurring failures and leading indicators., • Investigate degradation signals and turn them into alerts or engineering tickets., • Audit fleet configuration, detect drift, drive it back to baseline, and simplify the configuration so drift is harder to create in the first place., • Track component-level health and feed preventive maintenance intervals and the monthly fleet health report., • Produce clear evidence packs for engineering and hardware decisions: what is failing, how often, where, and what it costs., • Feed findings into playbooks so Robot Support can act on them., • Work with Robot Support and Commissioning to close the loop between what fails in the field and what we check before robots ship., • A few years of engineering experience in a data-heavy, operational or reliability role., • Data skills: Python, time-series analysis, and building dashboards people actually use., • Linux and log analysis, and enough ROS to interpret what a robot was doing when it failed — or the clear appetite to learn it quickly., • Curiosity and persistence — most of the value is in noticing what nobody reported., • Clear written communication; findings nobody can read do not get fixed. Measured on. Issues detected before customer impact, repeat incidents eliminated, alert quality, and config compliance. Starting from the interview process and continuing into your career with us, you will be working by our four Operating Principles: • Performance: High standards, outstanding results,, • Impact: Big challenges, bigger results, • Commitment: All in, every time, • One team: One mission, shared success Joining our team and company isn't just about expertise; it's about embracing uncertainty with ambition. We're crafting world-changing solutions, fueled by a passion to redefine what's possible. We will look for you to help create and shape the future of logistics solutions through our products, our culture and our shared vision. You will also receive: • Private healthcare via Bupa with 24/7 medical helpline, • Life insurance, • Income protection, • Pension: 4+% employee with option to opt into salary exchange, 5% employer, • Employee Assistance Programme - mental wellbeing, financial and legal advice/support, • 25 holidays per year, • Full meals onsite in Wallingford, • Fun team events on and offsite, snacks of all kinds in the office Dexory provides equal employment opportunities to all employees and applicants for employment. It prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. #J-18808-Ljbffr

At OQC, we aren’t just theorising about the future; we’re building it. Born from a philosophy of bold innovation, we’ve successfully transitioned quantum computing from an academic dream into a commercial reality. The most exciting thing is that we’re just getting started. As a Senior FPGA Engineer, you’ll play a critical role in designing and delivering the precision control hardware that powers our quantum computing systems. You’ll help solve complex technical challenges across FPGA architecture, high-speed data systems, and real-time signal processing — contributing directly to the advancement of scalable quantum computing technologies. We’re looking for a Senior FPGA Engineer to join our Advanced Product Development Group (APD), working on purpose-built FPGA hardware for quantum computing applications. This role combines deep technical expertise with cross-functional collaboration, system-level thinking, and mentorship responsibilities within a highly innovative engineering environment. • Defining scalable FPGA architectures with a focus on deterministic timing, synchronization, maintainability, and multi-card communication., • Designing, implementing, and verifying complex RTL for high-performance microwave and RF applications., • Developing interfaces and control logic for high-speed ADCs, DACs, memory systems, and RF SoC platforms., • Implementing real-time DSP algorithms optimized for FPGA resources and multi-clock domain designs., • Supporting hardware bring-up, lab integration, verification activities, and system-level testing., • Collaborating closely with Electronics, Embedded Software, Mechanical, Cryogenic, and Deployment teams to deliver fully integrated systems., • Mentoring junior engineers through code reviews, technical guidance, and development best practices while contributing to project planning and technical documentation., • Commercial experience in FPGA design and verification within complex hardware environments., • Experience with System Verilog, and/or VHDL., • Expert-level proficiency in Verilog and deep understanding of FPGA architectures., • Strong experience achieving timing closure on high-utilization FPGA designs and writing timing constraints., • Experience developing systems involving high-speed ADCs/DACs, synchronization across multiple boards/subsystems, and real-time DSP., • Ability to work independently on technically challenging projects while balancing delivery, quality, and risk., • Experience collaborating across multidisciplinary engineering teams in fast-paced R&D or product development environments., • Bachelor’s degree (or higher) in Engineering or a related technical discipline., • Strong communication, leadership, problem-solving, and stakeholder management skills., • Background in RF and microwave applications., • Experience developing control electronics for quantum computing systems., • Familiarity with Altera Quartus toolchains., • Experience using spectrum analysers, oscilloscopes, and MATLAB/Simulink for DSP modelling., • Exposure to compliance and validation activities including EMI/EMC, CE, or FCC standards., • Experience representing engineering teams externally through conferences, technical talks, or industry collaborations. You will join a world-class team at the forefront of the next computational era. We offer a culture of bold innovation, the chance to work with unique lab infrastructure, and the opportunity to see your work redefine the limits of computation. Learn more about our benefits and positive work culture here: company/careers-at-oqc/ #J-18808-Ljbffr

BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities. As an Electrical Hardware Engineer you will join our engineering team and take technical ownership of the electrical hardware that supports our current infusion product portfolio. You will investigate complex PCBA and electronic product issues, develop compliant engineering solutions, and help maintain product safety, reliability, quality, and availability throughout the product lifecycle. Most of your work will focus on released products, including component obsolescence, fault diagnosis, controlled design changes, manufacturing support, supplier issues, and product reliability. You will also contribute to new product development by applying Design for Testability, Design for Manufacture, and Design for Assembly principles to PCBAs and electro-mechanical assemblies. • Lead investigations into electrical and electronic issues, taking ownership from initial assessment through to effective closure., • Diagnose PCBA, circuit, component, test-system, and electro-mechanical faults using schematics, test data, and structured root-cause analysis., • Manage component obsolescence through impact assessment, alternative component evaluation, technical risk review, qualification, and implementation., • Develop controlled engineering changes supported by clear technical justification, verification, validation, risk management, and configuration control., • Support PCBA manufacturing lines, product transfers, test methods, supplier changes, qualification activities, and process validation., • Resolve quality, yield, reliability, test, and manufacturing issues with production sites, suppliers, and technical teams., • Contribute to new product development through design reviews, component selection, verification planning, and DFT, DFM, and DFA input., • Deliver sustaining engineering projects and technical work packages to agreed quality, scope, and delivery requirements., • Hold an HNC, HND, degree, or equivalent practical experience in Electronics, Electrical Engineering, or a related field., • Bring strong sustaining or post-release engineering experience with electronic or electro-mechanical products, ideally within medical devices or another regulated industry., • Demonstrate circuit-level and component-level fault-finding experience using schematics, test data, oscilloscopes, digital multimeters, power supplies, electronic loads, or logic analysers., • Understand analogue and digital circuits, power supplies, interfaces, sensors, embedded hardware, PCBA manufacturing, assembly, testing, and common failure modes., • Apply experience in component obsolescence, engineering change control, verification, qualification, process validation, and DFT, DFM, or DFA principles., • Work proactively across multiple technical priorities, communicate findings clearly, challenge assumptions constructively, and take accountability for decisions and outcomes. BD is proud to be certified as a Top Employer 2026 in United Kingdom and in Europe, reflecting our commitment to creating an exceptional working environment At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of healthcare. At BD, you’ll discover a culture in which you can learn, grow and thrive. We believe that when people connect in person, we learn faster, collaborate more deeply, and build a stronger culture. Join us and enjoy a culture where face-to-face collaboration supports your learning, your progress, and your success. Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally protected characteristics. Electrical Design Engineering, Electrical Engineering, Electrical Manufacturing, Electronics Test Engineering, Manufacturing, Manufacturing Automation, Manufacturing Development, Manufacturing Engineering, Manufacturing Optimization, Manufacturing Production At BD, we reward, support and develop our associates through our comprehensive Total Rewards program. We are committed to attracting and retaining high quality talent by providing reward and recognition opportunities that promote a performance-based culture, as well as a competitive package of compensation and benefits programs. You can learn more on our career site under "Our Commitment to You". Our salary or hourly rate ranges reward associates fairly and competitively. We regularly review these ranges and factors, such as location, contribute to the range displayed. Our pay is based on the role and the necessary skills and education to perform it successfully. The salary or hourly rate offered is determined by the role's specific requirements, including any applicable step rate pay system at the work location. Salary or hourly pay ranges are influenced by labor laws and Collective Bargaining Agreement (CBA) requirements applicable to the work location which may also affect the workplace arrangement of the role. #J-18808-Ljbffr

Reading What we’re all about: Any company can tell you about how they are a multi award winning, market leading business and yes, we are both of those things in the world of IoT connectivity! But we’re more than that. Our mission? To make IoT management a breeze for any device, anywhere. With over 20 million IoT subscriptions active in 165 countries and direct partnerships with 50+ mobile networks, we connect you to more than 750 networks worldwide, delivering unmatched value across the IoT connectivity chain. Innovation is in our DNA, and we have an insatiable hunger to ‘wow’! While we may not always get it right, our drive to collaborate, innovate, and achieve top-notch customer satisfaction never wavers. We offer industry expertise, stellar service support, and the most flexible, resilient, and secure connectivity solutions on the market. Our expertise spans across various sectors, including industry, agriculture, healthcare, security, transport, utilities, and smart cities. IoT… a fancy acronym or a secret code? The Internet of Things (IoT) is like the magical glue that keeps the world connected! From ordering your favourite takeaway to the ANPR technology that helps you find a parking spot, IoT is everywhere—even if you don’t realize it. At Wireless Logic, we provide cutting‑edge connectivity solutions and technologies to ensure a vast array of devices stay seamlessly connected. Join the Wireless Logic Adventure! Role Overview: The Senior Procurement Category Lead – Technology will be responsible for developing and delivering the global procurement strategy across Wireless Logic’s technology spend portfolio. The role will manage a broad range of technology categories, including software and SaaS, cloud and hosting, telecommunications, cybersecurity, IT infrastructure, hardware, professional services, and managed technology services. Working closely with senior stakeholders across Technology, Information Security, Finance, Legal, Business Systems and regional operating companies, the role will lead strategic sourcing initiatives, supplier negotiations, contract renewals, and supplier performance management. This is a senior, commercially focused role with significant autonomy and visibility across the Group. The successful candidate will help establish consistent procurement practices, consolidate fragmented spend, improve supplier governance, and deliver measurable commercial value. The role reports to the Head of Global Procurement. • Develop and implement global category strategies for technology spend, aligned with business priorities, technology roadmaps, and financial objectives., • Lead complex sourcing activities, including market analysis, RFI, RFP, competitive tendering, supplier evaluation, negotiation, and contract award., • Manage commercial negotiations for new agreements, renewals, and contract changes, securing improvements in pricing, service levels, contractual protections, and overall value., • Develop a structured forward plan for technology renewals, ensuring sufficient time for demand validation, market testing, negotiation, and stakeholder approval., • Identify opportunities to consolidate suppliers, standardise technology services and leverage Group-wide purchasing power across operating companies., • Work with technology and business stakeholders to challenge demand, validate requirements, and identify opportunities to optimise licences, usage, specifications, and service scope., • Manage key technology supplier relationships through regular performance reviews, commercial governance, SLA monitoring, and improvement planning., • Partner with Legal, Information Security, Compliance, Finance, and other stakeholders to ensure supplier risks and contractual obligations are appropriately managed., • Support the development and implementation of supplier relationship management practices for strategic and business-critical technology suppliers., • Provide commercial and procurement support for major technology transformation programmes, implementations, and strategic projects., • Monitor market trends, supplier developments, emerging technologies, and commercial models to identify risks, opportunities, and potential innovation., • Ensure sourcing and contracting activities comply with procurement policies, delegated authority, supplier due diligence requirements, and internal governance processes., • Maintain accurate reporting of sourcing activity, savings, cost avoidance, supplier risk, contract status, and category performance., • Build strong relationships with regional operating companies and support the adoption of consistent procurement processes and preferred supplier arrangements., • Contribute to the continued development of the Global Procurement function, including category management tools, templates, governance, and best-practice processes. The Secret Sauce: • Significant procurement and category management experience within technology, IT or telecommunications spend., • Demonstrable experience managing categories such as software, SaaS, cloud services, cybersecurity, IT infrastructure, hardware, telecommunications, or technology professional services., • Strong experience leading complex and high-value sourcing exercises, including RFI and RFP processes, supplier evaluations, and contract negotiations., • Proven track record of delivering measurable cost savings, cost avoidance, commercial improvements, and supplier performance benefits., • Strong understanding of technology commercial models, including subscription licensing, consumption-based pricing, enterprise agreements, cloud commitments, and managed services., • Experience managing contract renewals and identifying opportunities for licence optimisation, demand management, and supplier consolidation., • Strong commercial and financial acumen, with the ability to analyse pricing models, supplier proposals, total cost of ownership and business cases., • Experience working with senior stakeholders across Technology, Information Security, Finance, Legal and operational business functions., • Strong negotiation, influencing, and stakeholder management skills., • Ability to manage multiple sourcing projects and priorities across different business areas, regions, and timelines., • Strong written and verbal communication skills, with the ability to present commercial recommendations clearly to senior decision-makers., • A proactive and pragmatic approach, with the confidence to challenge requirements and drive decisions. Why Come Work With Us? Here’s why we’re confident you’ll love being part of our team: • The chance to join a creative, entrepreneurial company where bold ideas are celebrated., • Full training, ongoing support, and the tools to help you thrive and grow in your role., • We’re a company with heart. We genuinely care about our people and make sure everyone feels valued, respected, and part of the family. Overview of interview process at Wireless Logic: • Tele Interview – Meet the TA team If you require reasonable accommodation during the application and selection process, please let us know. We will work together to best meet your needs. Wireless Logic Group unites and brings people together. We accomplish this when we lead with a lens of diversity, equity, and inclusion in everything we do. As a global company that drives culture we aim to reflect the world’s diverse voices both internally and externally to ensure success in our mission. By applying for this role, you are consenting for us to hold and process your data in compliance with the General Data Protection Regulations. If you have any questions or wish to exercise your right to access, erase or restrict the holding or processing of your data please contact us ( ) and we will respond to your query as soon as possible. #J-18808-Ljbffr

At OQC, we aren’t just theorising about the future; we’re building it. Born from a philosophy of bold innovation, we’ve successfully transitioned quantum computing from an academic dream into a commercial reality. The most exciting thing is that we’re just getting started and we’ve recently closed our £260 million Series C funding round – the largest fundraise ever completed by a quantum computing company in Europe. Help push the performance of OQC’s quantum processors through advanced control theory, pulse optimisation and rigorous processor characterisation. You’ll develop and validate techniques that improve gate fidelity and stability, turning experimental breakthroughs into scalable calibration capabilities while providing insight that shapes future chip design. As a Quantum Engineer specialising in control, you’ll take quantum control methods from initial experiment through to system-level calibration pipelines. Working across Advanced Product Development, Calibration Engineering, Processor Innovation, Compiler and software teams, you’ll diagnose complex performance challenges and translate successful techniques into repeatable, production-ready workflows. • Develop and experimentally validate high-fidelity single- and two-qubit operations., • Design, optimise and benchmark pulse shapes using quantum control, numerical optimisation and experimental techniques., • Characterise gate error mechanisms, including coherent error, leakage, crosstalk, drift and control-chain distortion., • Build robust experimental pipelines, data-analysis workflows and performance benchmarks for quantum processors., • Define calibration requirements and partner with Calibration Engineering and Calibration Operations to operationalise successful methods., • Evaluate new devices with Processor Innovation, providing clear feedback on gate performance and processor behaviour., • Transfer new control techniques into OQC’s production software stack, documenting methods, acceptance criteria and evidence for technical handover., • A PhD, or equivalent professional experience, in physics, quantum engineering, electrical engineering, applied mathematics or a related discipline., • Experience measuring or modelling quantum systems., • Experience developing scientific software for experiment control, numerical analysis or simulation., • Strong scientific programming and data-analysis skills using Python or an equivalent language., • A strong understanding of quantum mechanics and qubit control., • Experience with numerical analysis, parameter estimation, experimental design and optimisation., • The ability to diagnose complex, system-level performance issues across hardware and software boundaries., • Clear and concise scientific communication, including confident technical presentation skills., • A collaborative, ownership-driven approach with strong problem-solving and prioritisation skills., • Experience working with superconducting qubits and microwave control systems., • Experience developing, calibrating or experimentally characterising quantum processors., • Hands-on experience optimising single- or two-qubit gates through pulse-level control., • Familiarity with randomised benchmarking, gate set tomography or algorithmic benchmarking., • Experience investigating crosstalk, drift, coherent errors or signal-chain distortion., • Experience transferring experimental methods into repeatable engineering or operational workflows., • Knowledge of machine learning or numerical optimisation techniques applied to physical systems., • Familiarity with control electronics, waveform generation and microwave signal chains., • Experience with quantum software frameworks such as Qiskit, PennyLane or Cirq. You will join a world-class team at the forefront of the next computational era. We offer a culture of bold innovation, the chance to work with unique lab infrastructure, and the opportunity to see your work redefine the limits of computation. Learn more about our benefits and positive work culture here: company/careers-at-oqc/ #J-18808-Ljbffr

Location: Bracknell + Hybrid Salary: Excellent basic salary plus bonus and Vodafone benefits Working hours: Full time 37.5 hours per week - Monday to Friday Hybrid We believe that through collaboration and connection with our colleagues we can achieve great things. Our hybrid working approach allows our people to work both in the office and at home, providing the flexibility and resources you need to succeed in your role. We don't require you to be in on specific days; instead, we ask people to come into the office 2-3 days each week, for at least 8 days per month. You should work with your line manager to understand what their expectations are for you, your specific role and your team. We're here to build a network the UK can count on - one that connects people, places and potential. Because no matter where you live, what your background is, or how you get online - we think everyone deserves the same chance to stay connected, and with VodafoneThree, that future's being built - today. We're creating more than the UK's best network. We're helping close the digital divide, empower communities and drive meaningful progress. We believe that everyone should feel they belong. Whoever you are and whatever your story, there's space for you here. We're building a workplace where different perspectives are welcomed, voices are heard, and everyone feels safe to show up as themselves. You'll join a team that genuinely cares - about each other, about our customers, and about the future we're building. From day one, you'll be welcomed, valued and encouraged to bring your whole self to work. Join us and you'll be at the heart of change. That means building responsibly, investing sustainably and creating opportunities that last. We're not just expanding connectivity; we're reimagining what a connected nation looks like. With £11bn invested in 5G and digital infrastructure, your work will directly power businesses, services, and communities across the country. You'll work on real challenges, with real impact, across every corner of the country. Wherever you join us, whatever your role, you'll be helping to build a future that works better for everyone. We move at pace, because what we're building matters - and we're learning as we go. We're proud of the progress we've made, but we're just getting started. Join our UK Networks team, where we're continually building and enhancing our network, connecting millions of people and businesses across the country. Be part of the team that makes it all happen - simplifying, automating, and bringing better connectivity than ever before, with giga-fast speed, to our customers. • You'll lead the end-to-end operational management of Fixed Network Test Lab environments, ensuring they remain fit for purpose and ready to support evolving business needs., • You'll own infrastructure capacity planning across multiple lab sites, forecasting future demand and ensuring space, power, cooling, and environmental requirements can support growth., • You'll design and implement scalable, resilient lab infrastructure solutions, including cabinet layouts, power systems, and environmental controls., • You'll oversee installation, move, add, and change (MAC) activities, ensuring quality delivery, accurate configuration management, and minimal disruption to services., • You'll act as the key escalation point for lab-related issues, coordinating resolution activities and maintaining clear communication with stakeholders., • You'll analyse performance trends, produce KPI reporting, identify risks, and recommend infrastructure investments that support business objectives and budget requirements., • You'll collaborate with technical teams, customers, and suppliers to enable high-quality testing and validation of fixed network services., • You'll champion compliance with safety, environmental, and technical standards, ensuring all activities meet regulatory and industry requirements., • Proven experience working within telecommunications, network infrastructure, or technical lab environments., • Strong knowledge of capacity management, including power, cooling, and infrastructure planning., • Excellent analytical and problem-solving skills, with the ability to make data-driven decisions and manage budgets effectively., • Experience designing and deploying technical infrastructure solutions in complex environments., • Strong stakeholder management and influencing skills, with the ability to build relationships across diverse teams and functions., • A collaborative leader who can coordinate virtual teams and deliver results in fast-paced, evolving environments., • Good understanding of telecommunications hardware, network infrastructure, and associated technologies., • Hands-on experience with equipment installation, cabling standards, and physical infrastructure deployment., • Knowledge of Ethernet networking and Layer 1-3 connectivity, including installation, configuration, and fault diagnosis., • Experience working with fibre optic technologies, including testing, installation, and fault finding., • Understanding of infrastructure governance, installation standards, and controlled environment best practices., • Knowledge of DC and AC power systems, battery technologies, RF technologies, and RadHaz safety practices would be advantageous., • A proactive, customer-focused approach with a passion for operational excellence, continuous improvement, and delivering high-quality outcomes. We know that everyone is unique, with multiple aspects to their identity and different experiences behind them. We are passionate about Inclusion for All and creating a workplace where everyone can thrive, whatever their personal or professional background. If you're excited about this role but your experience doesn't align exactly with every part of the job description, we encourage you to apply as you may be the right candidate for this role or another role, and our recruitment team can help you see how your skills fit in. We care about our people's success by offering great pay, bonuses, up to 28 days off plus bank holidays, and paid time for charity work. You can personalise our benefits for you and your family, like discounts, vouchers, a pension plan and loads more. We help with your career through our amazing learning tools and top-notch parental leave policies. We are regulated by the Financial Conduct Authority and all offers of employment for this role are subject to background checks, including criminal (DBS) and financial checks to meet the regulators standards. If you require any reasonable adjustments or have an accessibility request as part of your recruitment journey, for example, extended time or breaks in between online assessments, a sign language interpreter, or assistive technology, please refer to the Accessibility section of our Careers website (uk/reasonable-adjustments/) for guidance. We use AI in different parts of our business to boost innovation, improve efficiency, and create new opportunities. We know many candidates use AI to fine-tune their CVs or prepare for interviews, but what we really care about is your unique experiences and achievements. During the interview, we want you to rely on your own knowledge and skills to show us who you really are - your personality, creativity, and abilities. Above all, we're looking for authenticity and can't wait to get to know the real you. #J-18808-Ljbffr

Location: Wallingford - Oxfordshire (Hybrid) onsite circa 1-2 days per month Permanent At Dexory, we are transforming the warehousing and logistics industry through data intelligence. We’re currently recruiting for a full stack developer to join our Platform Engineering team, the versatile group responsible for the internal tooling, infrastructure and special projects that power our robot fleet and data pipelines. You will own features across the whole path: the Go service that ingests telemetry from a robot scanning a warehouse in Ohio, and the interface a field engineer opens at two in the morning to work out why that robot stopped. Offices based in Wallingford, Oxford and looking for someone who can do circa 1-2 days per month on site. Any experience within robotics or start up / scale up environments highly desirable. • End-to-end delivery: take features from data model through Go service to the interface, rather than handing off at a boundary., • Internal tooling and infrastructure: build and maintain software systems and internal APIs that support our robotics operations and data processing pipelines., • Interfaces for engineers and operators: build data-dense React and TypeScript interfaces that make large volumes of telemetry and scan data legible and fast to work with., • Real-time data systems: work with WebRTC, WebSockets, gRPC and Zenoh to move live telemetry and video from robot to browser., • Backend proficiency: hands-on experience building backend services in Go, or in a comparable statically typed language with real appetite to work in Go. Our services are written in Go and we expect you to be productive in it quickly., • Front-end capability: solid React and TypeScript, comfortable building dense, interactive tools rather than only forms and content pages, and interested in why a view is slow rather than resigned to it., • 3D, spatial or map-based interfaces: three.js, WebGL, deck.gl or Cesium., • Robotics, IoT platforms or other hardware-adjacent software., • Video streaming pipelines, or previous hands-on work with WebRTC., • Messaging and serialisation middleware such as Protobuf, Zenoh or MQTT., • Warehouse, logistics or supply chain systems. Starting from the interview process and continuing into your career with us, you will be working by our four Operating Principles: • Performance: High standards, outstanding results,, • Impact: Big challenges, bigger results, • Commitment: All in, every time, • One team: One mission, shared success Joining our team and company isn't just about expertise; it's about embracing uncertainty with ambition. We're crafting world-changing solutions, fuelled by a passion to redefine what's possible. We will look for you to help create and shape the future of logistics solutions through our products, our culture and our shared vision. You will also receive: • Private healthcare via Bupa with 24/7 medical helpline, • Life insurance, • Income protection, • Pension: 4+% employee with option to opt into salary exchange, 5% employer, • Employee Assistance Programme - mental wellbeing, financial and legal advice/support, • 25 days holiday per year + bank holidays, • Full meals onsite in Wallingford, • Fun team events on and offsite, snacks of all kinds in the office Dexory provides equal employment opportunities to all employees and applicants for employment. It prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. #J-18808-Ljbffr

The Infrastructure Design team is responsible for technicaldesign and assurance through a project's lifecycle, acting asexperts in various technologies, supporting RBFT and NHSorganisations. Operating a cloud-first strategy, architects arerequired to oversee on-premise services and facilitate thetransition to cloud services., A Lead Architect is responsible for converting the technicalrequirements of a project into the architecture and design thatwill guide the final product. The post holder is also responsiblefor bridging the gaps between complex business problems andsolutions in the cloud whist supporting the on premise estate.The Lead Technical Architect is the technical lead for a range ofprogrammes across Royal Berkshire NHS Trust. This role hasresponsibility for defining strategic direction of technology andleading the technical design for of all systems and services,justifying design decisions that form a critical part of the Digital vision and strategy., o Co-responsible for the strategic definition and development of the Trust IT Infrastructure and Cloud architecture. The Trust IT architecture covers clinical and non-clinical systems and support for links and access with the wider healthcare community.o Act as the Trusts Infrastructure and Cloud Technical Design Authority who provides a focus for Infrastructure elements of design across all IT systems, hardware and software. Manages the development and adherence to the IT architecture and participates in project governance ensuring alignment of projects within the architectural IT roadmap and strategy of the Trust.o Lead the implementation of infrastructure and cloud architecture solutions across a group of clinical and business applications or technologies based on enterprise business strategy, architecture principles, business capabilities and business requirements.o Understand the business (its drivers and capabilities) and determine corresponding enterprise system designs and change requirements to drive the organization's targeted business outcomes.o Provide architectural ownership in lifecycle of infrastructure hardware platforms and infrastructure components of application delivery ensuring initiative is aligned with the overall enterprise architecture.o Own and maintain the full architecture documentation and standards and monitor compliance.o Embed the overall enterprise architecture approach, strategic technologies and architecture standards. Diversity makes us interesting... Inclusion is what will make us outstanding. Inequality exists and the journey to eliminate it is not easy. Every step we take will be a purposeful step forward to deliver a truly inclusive culture where all our people are enabled to deliver outstanding care, where background is no barrier, and where everyone can be their authentic self and we truly represent our patient community. #J-18808-Ljbffr

At OQC, we aren’t just theorising about the future; we’re building it. Born from a philosophy of bold innovation, we’ve successfully transitioned quantum computing from an academic dream into a commercial reality. The most exciting thing is that we’re just getting started and we’ve recently closed our £260 million Series C funding round – the largest fundraise ever completed by a quantum computing company in Europe. As a Staff Scientist specialising in Quantum Error Correction (QEC) Theory, you'll help shape OQC's path towards fault-tolerant quantum computing. You'll develop hardware-aware error correction strategies that combine the unique capabilities of our multimode superconducting processors with advanced codes, decoders and fault-tolerant protocols, turning theoretical breakthroughs into practical advances in quantum hardware. Joining our Quantum Error Correction research team, you'll be a recognised technical authority, helping define the scientific direction of OQC's error correction strategy. You’ll work at the intersection of quantum information theory and experimental hardware, developing QEC approaches for our next-generation OQC GENESIS platform and Dimon architecture. By combining erasure detection within individual devices with error correction across multiple encoded qubits, you’ll tackle some of the most important challenges on the path to scalable, fault-tolerant quantum computing. This is a senior individual contributor role with significant scientific autonomy and influence. You’ll take ownership of ambitious research projects, collaborate closely with experimentalists and engineers, mentor fellow scientists and help translate cutting‑edge research into the technical requirements that shape OQC's future processors. • Develop and benchmark hardware‑aware QEC schemes that combine error detection within OQC's multimode devices with error correction across encoded qubit arrays., • Design advanced quantum codes and decoders that exploit syndrome measurements and erasure information while accounting for imperfect detection and residual errors., • Build and validate circuit‑level noise models alongside experimental teams, incorporating relaxation, dephasing, leakage, crosstalk and correlated errors., • Optimise syndrome extraction, erasure‑check schedules and fault‑tolerant protocols around hardware connectivity, native operations, measurement times and decoding constraints., • Evaluate logical memories and operations, balancing logical error rates, physical qubit overheads, execution time and classical decoding costs., • Translate theoretical findings into quantitative hardware, control and readout requirements, collaborating with experimentalists to design and validate critical experiments., • Lead complex scientific investigations, develop reproducible simulation and analysis tools, mentor colleagues and communicate research through publications, conferences and technical collaborations., • A PhD in Quantum Information, Physics, Mathematics, Computer Science or a related discipline, or an equivalent record of significant research experience., • A strong track record of original contributions to quantum error correction, fault‑tolerant quantum computing or related quantum information research, demonstrated through publications, research software or other substantive outputs., • Deep understanding of quantum information theory, including stabiliser formalism, quantum noise channels and fault‑tolerance principles., • Expertise in topological codes, including surface or colour codes, or quantum low‑density parity‑check (qLDPC) codes., • Experience with decoding methods for erasure and Pauli noise, including matching‑based approaches, belief propagation or ordered‑statistics decoding., • Strong understanding of fault‑tolerant logical operations, such as lattice surgery, code switching, transversal gates or magic‑state preparation and distillation., • Experience with circuit‑level simulation, logical error‑rate estimation and resource analysis informed by experimental data., • Strong scientific programming skills in Python or C++, particularly for simulation, decoder implementation and reproducible research., • Proven ability to independently lead scientific investigations, combine analytical and numerical approaches, and translate theoretical findings into practical hardware insights., • Excellent scientific communication and collaboration skills, with the ability to influence research direction and work effectively across theoretical and experimental disciplines., • Experience with erasure‑aware QEC, dual‑rail encodings or concatenated error correction schemes combining inner error detection with outer error correction., • Knowledge of superconducting quantum circuits, particularly multimode transmons and their application to quantum error correction., • Experience with microwave control, dispersive readout or modelling noise in superconducting quantum devices., • Experience developing hardware‑aware QEC strategies that account for realistic device constraints and experimental imperfections., • An established research profile within quantum information or fault‑tolerant quantum computing., • Experience mentoring researchers and contributing to collaborative academic or industrial research programmes., • 10+ years of R&D experience in quantum computing or quantum information, including doctoral, postdoctoral or industrial research. You will join a world‑class team at the forefront of the next computational era. We offer a culture of bold innovation, the chance to work with unique lab infrastructure, and the opportunity to see your work redefine the limits of computation. Learn more about our benefits and positive work culture here: company/careers-at-oqc/ #J-18808-Ljbffr

This role has been designed as ‘’Onsite’ with an expectation that you will primarily work from an HPE office. Hewlett Packard Enterprise is the global edge-to-cloud company advancing the way people live and work. We help companies connect, protect, analyze, and act on their data and applications wherever they live, from edge to cloud, so they can turn insights into outcomes at the speed required to thrive in today’s complex world. Our culture thrives on finding new and better ways to accelerate what’s next. We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs. We make bold moves, together, and are a force for good. If you are looking to stretch and grow your career our culture will embrace you. Open up opportunities with HPE. Job Family Definition: Responsible for architecting solutions that will achieve customer business outcomes either within a specific technical domain, or across the broader company portfolio (hardware, software, services, and as a service offerings) in combination with all necessary third-party components (e.g. software and integration). Develops and articulates compelling, accurate, and relevant proposals and ensures customer's business and technical requirements are met. Can be aligned to a specific area of technical expertise (e.g., products, solutions, services). Provides technical expertise to sales teams and customers (through sales presentations, product/solution demonstrations, etc.) aimed at gaining the customer mindshare within their domain. These jobs focus on technical selling to customers/partners. May be aligned to specific accounts based on business priority. Management Level Definition: Contributions impact technical components of HPE products, solutions, or services regularly and sustainable. Applies advanced subject matter knowledge to solve complex business issues and is regarded as a subject matter expert. Provides expertise and partnership to functional and technical project teams and may participate in cross-functional initiatives. Exercises significant independent judgement to determine best method for achieving objectives. May provide team leadership and mentoring to others. Demonstrates in-depth knowledge in one or more solution domains, company products, services, and solutions as well as the customer’s technical and business environment. Develops compelling customer proposals and critically reviews them, manages the expectations of internal stakeholders and customers, ensuring the meeting of customer’s business and technical requirements are met. Quantifies the impact of the business problem(s), positions business value, identifies the strengths and weaknesses of the overall proposed solution to achieve long-term business objectives. Translates outcome-based solutions into a functional solution design that aligns to the customers business needs, and then translates that functional design into a technical design and architecture that can be scaled to accommodate growth. Communicates how the solution value propositions addresses customer business needs. Tracks leading-edge and emerging technologies. Incorporates an understanding of technology trends within the IT industry, as well as the customer’s industry. Actively gathers and applies competitive intelligence as a critical component of account support. Drives the Account Business Planning process, leveraging knowledge of industry trends and the customer’s technical environment. Produces in-depth comparative analysis of alternative approaches to meet solution requirements. Develops, configures, and right sizes an optimal workload solution, balancing cost, scope, scale, boundaries, and benefits to deliver superior value and increase the win rate. Leverages deep knowledge of partner products and services and adjusts strategies to leverage the relationship between the service provider/partner and the customer. Successfully transfers knowledge to external partners to deliver effective solutions to customers. Proactively builds the pipeline by identifying opportunities (e.g., enhancements, unmet or unrecognized needs, up-selling, and cross-selling opportunities) within the account. Monitors the account pipeline and nurtures active deals from the opportunity to close. Uses pipeline insights to help prioritize activities in a way that ensures time, and resources are invested wisely in pursuit of deals with the highest potential. Actively participates in sales forecast meetings and provides feedback to accelerate the sales lifecycle. Documents ongoing work (activities, tasks) throughout the sales cycle using specific tools and resources and sharing best practices with peers and partners to collaborate more effectively. Builds strong professional relationships with customer key executives across the business and industry. Proactively shares knowledge with peers and helps develop more junior team members. First-level university technical degree or equivalent technical qualifications. Advanced degree in technology preferred. 10–12 years of technical experience in IT with a focus on technical consulting and solution selling Enterprise architecture frameworks and project management methodologies and certifications are helpful, but not required. Advanced experience participating in and leading solution configurations and the creation of demos and proofs-of-concept (POC) to meet customer requirements. Advanced understanding of the company portfolio of products, software, services, solution domain specialization, adjacent solution domain(s), and how they can be combined to address customer needs. Advanced ability to translate aaS and complete ecosystem, differentiated value, solutions, and workloads and ability to prioritize aaS offerings and consumption models that will achieve the customer’s outcomes and greatest return. Advanced understanding of aaS business model variations. Advanced ability to collaborate cross-functionally to ensure consistency of output and meet aaS strategic goals. Advanced written and verbal communication skills, including active listening and storytelling, and the ability to communicate in English and applicable local languages as needed to perform job requirements. Advanced consultative/value selling skills, including, whiteboarding, objection handling, and closing skills to proactively help customers make business decisions. Advanced company business knowledge, technical tools, and standard customer relationship management (CRM) systems and tools. Advanced resource management skills, including how and when to effectively engage SMEs/specialists. Hands on experience with one or more products, solutions, tools, or services aligned to respective job responsibility. Ability to design and develop a playbook for demonstrations or walk throughs of products, solutions, tools, or service. Ability to deliver live demonstrations or walk throughs of products, solutions, tools, or service to customers, partners, and other stakeholders. Health & Wellbeing We strive to provide our team members and their loved ones with a comprehensive suite of benefits that supports their physical, financial and emotional wellbeing. Personal & Professional Development We also invest in your career because the better you are, the better we all are. We have specific programs catered to helping you reach any career goals you have - whether you want to become a knowledge expert in your field or apply your skills to another division. Unconditional Inclusion We are unconditionally inclusive in the way we work and celebrate individual uniqueness. We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs. We make bold moves, together, and are a force for good. Let’s Stay Connected: Follow @HPECareers on Instagram to see the latest on people, culture and tech at HPE. HPE is committed to creating an inclusive and accessible workplace and encourages applications from all qualified individuals, including those with disabilities. If you believe you require accommodation during any stage of the application or interview process, please submit your request by completing our secure form linked here. Note: This option is reserved for applicants needing assistance/reasonable accommodation related to a disability. We do not discriminate on the basis of race, gender, or any other protected category, and all decisions we make are made on the basis of qualifications, merit, and business need. Our goal is to be one global team that is representative of our customers, in an inclusive environment where we can continue to innovate and grow together. The Hewlett Packard Enterprise Standards of Business Conduct (SBC) embody the fundamental principles that govern our ethical and legal obligations to Hewlett Packard Enterprise. They pertain not only to our conduct within the company but also to conduct involving our customers, channel partners, suppliers and competitors. Hewlett Packard Enterprise provides equal employment opportunity to any employee or applicant without regard to sex, gender, color, race, ethnicity, religion, creed, national origin, ancestry, citizenship, age, marital status, sexual orientation, gender identity and expression, physical or mental disability, medical condition, pregnancy, protected veteran status, uniformed service status, familial status, genetic information, political affiliation, or any other characteristic protected by federal, state, or local law. If you’d like more information about your EEO right as an applicant under the law, Know Your Rights. HPE is an E-Verify employer. E-Verify is an Internet-based system that compares information from an employee's Form I-9, Employment Eligibility Verification, to data from U.S. Department of Homeland Security and Social Security Administration records to confirm the employment eligibility of all newly hired employees. For more information. HPE is committed to creating an inclusive and accessible workplace and encourages applications from all qualified individuals, including those with disabilities. If you believe you require accommodation during any stage of the application or interview process, please submit your request by completing our secure form linked here. Note: This option is reserved for applicants needing assistance/reasonable accommodation related to a disability. Please ensure the resume you submit to us does not include any sensitive personal data. Sensitive personal data includes data revealing information about your racial or ethnic origin, political opinions, religious or philosophical beliefs, trade union membership, health, sex life or sexual orientation. To the extent the resume you submit does contain this type of personal data, you consent to the storing and processing of this data by HPE for the purpose of reviewing and managing your application. #J-18808-Ljbffr

Location: Reading, Berkshire (On-site) XYZ Reality are the creators of the world's first and only engineering-grade Augmented Reality solution, purpose built for the construction industry. Not only have we created this holographic technology, that sits within The Atom - a smart, site-safe headset/hardhat - but we implement it on projects, utilising the power of AR to ensure that all schemes are completed in line with delivery timescales and budgets. XYZ has grown to over 100 staff across the UK, US & Europe and is working with Mission Critical organisations & construction companies to successfully deliver major projects. This role sits within the Production team at our NPI facility in Reading, Berkshire, reporting to the Production & Quality Director. As Procurement Manager, you will own procurement for our NPI facility end to end - supplier strategy, negotiation, contracts, purchase-to-pay and supplier performance - for a hardware product built from electro-mechanical, optical and electronic assemblies sourced internationally. The role takes procurement off the director and builds it into a managed function: negotiated terms, second sources where single-source risk justifies them, and supplier quality joined up with the QMS. You'll be building a function from a standing start, not inheriting a running one. • Own the supplier base - segmentation, approval, review and rationalisation. Identify and qualify second sources for single-source components, and lead sourcing for new product introduction from RFQ through to first article., • Negotiate pricing, lead times, payment terms, MOQs and framework agreements. Own supplier contracts, NDAs, tooling ownership, and consignment or buffer-stock arrangements - and deliver a year-on-year cost-reduction plan., • Negotiate and manage service, maintenance, support and calibration agreements for production equipment, test kit and facilities - including indirect and services procurement to the same commercial standards as direct material spend., • Own the purchase-to-pay process end to end, including ERP purchasing data (pricing, lead times, supplier records), reorder points, safety stock and order-quantity policy with Logistics and the Systems Engineer., • Own supplier quality under ISO 9001 clause 8.4 - approval, monitoring, scorecards, audits and corrective action - and ensure supply chain compliance (RoHS, REACH, conflict minerals, CE/UKCA)., • Line-manage the Systems Engineer and report on spend, delivered savings, supplier performance, lead times and shortage risk to the Production & Quality Director., • Substantial procurement experience in an electronics, electro-mechanical or precision-manufacturing environment., • Demonstrable negotiation record with measurable savings and improved commercial terms., • Experience of supplier quality management under ISO 9001, including audits and corrective action., • Confident user of ERP purchasing modules; CIPS qualification or equivalent desirable., • Strong understanding of BOM-driven purchasing, order quantities, lead times and inventory policy - comfortable managing material shortages before they reach production., • Experience contracting for services as well as materials - service, maintenance, support agreements, subcontract and indirect spend., • Experience of second-sourcing and supply-chain risk management on single-source components., • Working knowledge of international sourcing, incoterms, duty and customs., • Involvement in an ERP implementation or migration is a strong advantage., • Able to build a procurement function from a standing start rather than inherit a running one - comfortable with ambiguity and a fast-moving environment., • 25 days annual leave + public holidays, • Private healthcare with Vitality, • Christmas shutdown days on top of leave allowance (2-4 per year usually), • Biannual salary reviews, • Summer & Christmas staff parties, • Employee referral scheme, • Cycle to Work scheme, • Make a real-world impact of revolutionising the construction industry #J-18808-Ljbffr

We hire those that seek to innovate across people, process and technology. Join our global workforce, visualise the future and strive for success. Our engineering campus and corporate offices in the UK and US are optimal environments for ideas and innovation to flourish. ALL.SPACE, has developed a smart terminal, capable of linking with all satellites, all networks, in all orbits, all at once. Our ground-breaking software-defined service enablement platform integrates intelligent routing, edge computing and on-demand services to deliver unprecedented network resilience and application performance. Our terminal designs operate as fully electronic beam steering systems. Our IP has applications across a wide range of market sectors including aeronautical, land mobile, maritime, and 5G. It provides broadband, multi-beam, two-way communications with dynamic tracking of geostationary and non-geostationary satellites or terrestrial nodes. We are looking for world class talent to join our high-performing teamworking on cutting edge technologyin the satellite communications industry. We stand by our company values;INTEGRITY, INNOVATION & EXECUTION EXCELLENCE– giving you the opportunity to build your career in an environment where we encourage crisp decision-making, challenging the status-quo, championing your beliefs and ideas, sharing successes (and learning from failures) and working collaboratively with your fellow team members. ALL.SPACE is committed to practicing and promoting diversity, inclusion and equality in the workplace. We aim to lead by example by making satellite communications a more inviting and accessible industry for all. Visit www.all.space to learn more. Embedded Software Engineers are responsible for the architecture, design, implementation, test and maintenance of the embedded software used to manage and control ALL.SPACE’s terminal products. This includes embedded real-time terminal control software, web interfaces and REST API interfaces. The software engineer will work as part of an Agile development team delivering features against a release roadmap, to meet the product requirements. • Perform requirements analysis - working with internal and external stakeholders to understand the technical functionality required to meet customer needs., • Complete architecture and design documentation for new software features., • Deliver high-quality, tested software features for an embedded real-time system, using C++., • Implement automated unit and integration tests., • Test and debug functionality in simulation and on target hardware., • Contribute to the investigation and timely resolution of software issues., • Employ design patterns and practices to ensure appropriate quality, security, modifiability, and extensibility., • Work within the team’s Agile framework, contributing to best practice., • Experienced in C++ development on embedded systems., • Demonstrated success in delivery of reliable, real-time embedded functionality., • Full lifecycle development experience – design, develop, test, maintain., • Experience of Linux and FreeRTOS operating system competence., • Good understanding of physical interfaces such as Serial, Ethernet, SPI, CAN, etc., • On hardware debugging and performance characterisation., • Understanding of Source Code Management (git) and CI/CD pipelines., • Generation of appropriate documentation (Jira, Confluence)., • Perform peer reviews and test of other developers’ work., • Effective collaboration in high-pace agile team., • Good self-organizational skills and attention to detail., • Problem-solver and collaborative team member. Due to the need to control and debug on target hardware, this role requires working at ALL.SPACE’s Reading sites. Could be hybrid role, working on-site some of the time. • Annual bonus, • 25 days annual leave, • Public holidays, • Travel to work schemes, • Fruit, snacks & drinks, • Discounts platform, • Well-being centre ALL.SPACE is an Equal Opportunity Employer. We do not discriminate based on race, religion, sexual orientation, gender identity, age, non-disqualifying disability, or any other basis covered by applicable laws. We base all hiring decisions on candidate qualifications and business needs. #J-18808-Ljbffr

Who are we? We hire those that seek to innovate across people, process and technology. Join our global workforce, visualise the future and strive for success. Our engineering campus and corporate offices in the UK and US are optimal environments for ideas and innovation to flourish. ALL.SPACE, has developed a smart terminal, capable of linking with all satellites, all networks, in all orbits, all at once. Our ground-breaking software-defined service enablement platform integrates intelligent routing, edge computing and on-demand services to deliver unprecedented network resilience and application performance. Our terminal designs operate as fully electronic beam steering systems. Our IP has applications across a wide range of market sectors including aeronautical, land mobile, maritime, and 5G. It provides broadband, multi-beam, two-way communications with dynamic tracking of geostationary and non-geostationary satellites or terrestrial nodes. We are looking for world class talent to join our high-performing teamworking on cutting edge technologyin the satellite communications industry. We stand by our company values;INTEGRITY, INNOVATION & EXECUTION EXCELLENCE– giving you the opportunity to build your career in an environment where we encourage crisp decision-making, challenging the status-quo, championing your beliefs and ideas, sharing successes (and learning from failures) and working collaboratively with your fellow team members. ALL.SPACE is committed to practicing and promoting diversity, inclusion and equality in the workplace. We aim to lead by example by making satellite communications a more inviting and accessible industry for all. Visit www.all.space to learn more. Embedded Software Engineers are responsible for the architecture, design, implementation, test and maintenance of the embedded software used to manage and control ALL.SPACE’s terminal products. This includes embedded real-time terminal control software, web interfaces and REST API interfaces. The software engineer will work as part of an Agile development team delivering features against a release roadmap, to meet the product requirements. • Perform requirements analysis - working with internal and external stakeholders to understand the technical functionality required to meet customer needs., • Complete architecture and design documentation for new software features., • Deliver high-quality, tested software features for an embedded real-time system, using C++., • Implement automated unit and integration tests., • Test and debug functionality in simulation and on target hardware., • Contribute to the investigation and timely resolution of software issues., • Employ design patterns and practices to ensure appropriate quality, security, modifiability, and extensibility., • Work within the team’s Agile framework, contributing to best practice., • Experienced in C++ development on embedded systems., • Demonstrated success in delivery of reliable, real-time embedded functionality., • Full lifecycle development experience – design, develop, test, maintain., • Experience of Linux and FreeRTOS operating system competence., • Good understanding of physical interfaces such as Serial, Ethernet, SPI, CAN, etc., • On hardware debugging and performance characterisation., • Understanding of Source Code Management (git) and CI/CD pipelines., • Generation of appropriate documentation (Jira, Confluence)., • Perform peer reviews and test of other developers’ work., • Effective collaboration in high-pace agile team., • Good self-organizational skills and attention to detail., • Problem-solver and collaborative team member. Due to the need to control and debug on target hardware, this role requires working at ALL.SPACE’s Reading sites. Could be hybrid role, working on-site some of the time. • Annual bonus, • 25 days annual leave, • Public holidays, • Travel to work schemes, • Fruit, snacks & drinks, • Discounts platform, • Well-being centre ALL.SPACE is an Equal Opportunity Employer. We do not discriminate based on race, religion, sexual orientation, gender identity, age, non-disqualifying disability, or any other basis covered by applicable laws. We base all hiring decisions on candidate qualifications and business needs. #J-18808-Ljbffr

At NewOrbit Space, our mission is to engineer the lowest orbiting satellites on Earth to rapidly advance global connectivity and insight. We are currently building satellites that can operate at an altitude of just 200 km - one-third that of conventional satellites. • You’ll lead the team that owns the software that makes the spacecraft behave: real-time control flows, autonomy, mode management, FDIR, and the core flight applications that coordinate every subsystem., • You’ll design and implement robust flight-software services on RTOS or Embedded Linux - turning mission requirements into deterministic, testable software - then take it from simulation all the way to launch and on-orbit operations., • You’ll ensure our VLEO satellites stay safe and productive with strong fault tolerance, clean observability, and rapid iteration through over-the-air updates., • Lead the flight software engineering team – recruit, coach, and direct the work of a team of software engineers to deliver the flight software elements of a novel spacecraft to operate in VLEO., • Own the on-board flight-software stack – design, implement and test real-time C/C++ on RTOS or Embedded Linux, • Integrate subsystems end-to-end – define ICDs and build drivers/middleware over I2C/SPI/UART/CAN(-FD)/SpaceWire (as applicable)., • Build spacecraft behaviors & autonomy – implement mode management, sequencing, and autonomous FDIR for safe and productive operations., • Deliver reliable real-time performance – manage concurrency, timing, CPU/memory budgets, and observability under tight constraints., • Build verification infrastructure – prototypes, SIL/HIL test harnesses, simulations, and telemetry analysis tooling to validate designs early., • Ship code from review to orbit – push through CI/CD, support integration and launch ops, and deliver secure over-the-air updates., • Work across disciplines – collaborate with avionics, AOCS, comms and mission teams to trade compute, power, thermal, storage and link budgets., • 5+ years’ experience in development of flight software for spacecraft, including experience in leading engineers with flight software deliverables., • Proven experience in building production embedded or real-time systems in C/C++ and/or Rust on RTOS or Embedded Linux for space systems., • Strong grasp of real-time software: scheduling, interrupts, concurrency primitives, determinism, and designing for constrained CPU/memory., • Proven ability to build reliable, testable systems: unit/integration testing, simulation-first development, HIL validation, and disciplined debugging., • Hands-on experience integrating with hardware via common interfaces (I2C, SPI, UART, CAN(-FD), GPIO, etc.) and practical lab debugging., • Solid software engineering fundamentals: architecture, code review, static analysis, CI/CD, configuration management, and observability/logging., • Ability to own systems end-to-end: from requirements and design through implementation, verification, operations support, and iterative improvement., • Experience with spacecraft flight software frameworks, (e.g., cFS, F´, or building lightweight component-based equivalents)., • Familiarity with autonomy and fault management patterns for radiation/SEUs, watchdog strategies, redundancy, and safe-mode design., • GNC/AOCS-adjacent experience: sensor/actuator pipelines, control-loop integration, estimation/filters, timing analysis., • Digital-twin / simulator / SIL-HIL experience for end-to-end behavior validation and regression testing., • On-orbit operations know-how: commissioning flows, anomaly response, telemetry triage, and OTA update strategies. #J-18808-Ljbffr

At OQC, we aren’t just theorising about the future; we’re building it. Born from a philosophy of bold innovation, we’ve successfully transitioned quantum computing from an academic dream into a commercial reality. The most exciting thing is that we’re just getting started. As a Senior FPGA Engineer, you’ll play a critical role in designing and delivering the precision control hardware that powers our quantum computing systems. You’ll help solve complex technical challenges across FPGA architecture, high-speed data systems, and real-time signal processing — contributing directly to the advancement of scalable quantum computing technologies. We’re looking for a Senior FPGA Engineer to join our Advanced Product Development Group (APD), working on purpose-built FPGA hardware for quantum computing applications. This role combines deep technical expertise with cross-functional collaboration, system-level thinking, and mentorship responsibilities within a highly innovative engineering environment. • Defining scalable FPGA architectures with a focus on deterministic timing, synchronization, maintainability, and multi-card communication., • Designing, implementing, and verifying complex RTL for high-performance microwave and RF applications., • Developing interfaces and control logic for high-speed ADCs, DACs, memory systems, and RF SoC platforms., • Implementing real-time DSP algorithms optimized for FPGA resources and multi-clock domain designs., • Supporting hardware bring-up, lab integration, verification activities, and system-level testing., • Collaborating closely with Electronics, Embedded Software, Mechanical, Cryogenic, and Deployment teams to deliver fully integrated systems., • Mentoring junior engineers through code reviews, technical guidance, and development best practices while contributing to project planning and technical documentation., • Commercial experience in FPGA design and verification within complex hardware environments., • Experience with System Verilog, and/or VHDL., • Expert-level proficiency in Verilog and deep understanding of FPGA architectures., • Strong experience achieving timing closure on high-utilization FPGA designs and writing timing constraints., • Experience developing systems involving high-speed ADCs/DACs, synchronization across multiple boards/subsystems, and real-time DSP., • Ability to work independently on technically challenging projects while balancing delivery, quality, and risk., • Experience collaborating across multidisciplinary engineering teams in fast-paced R&D or product development environments., • Bachelor’s degree (or higher) in Engineering or a related technical discipline., • Strong communication, leadership, problem-solving, and stakeholder management skills., • Background in RF and microwave applications., • Experience developing control electronics for quantum computing systems., • Familiarity with Altera Quartus toolchains., • Experience using spectrum analysers, oscilloscopes, and MATLAB/Simulink for DSP modelling., • Exposure to compliance and validation activities including EMI/EMC, CE, or FCC standards., • Experience representing engineering teams externally through conferences, technical talks, or industry collaborations. You will join a world-class team at the forefront of the next computational era. We offer a culture of bold innovation, the chance to work with unique lab infrastructure, and the opportunity to see your work redefine the limits of computation. Learn more about our benefits and positive work culture here: company/careers-at-oqc/ #J-18808-Ljbffr

Location: Bracknell + Hybrid Salary: Excellent basic salary plus bonus and Vodafone benefits Working hours: Full time 37.5 hours per week – Monday to Friday We believe that through collaboration and connection with our colleagues we can achieve great things. Our hybrid working approach allows our people to work both in the office and at home, providing the flexibility and resources you need to succeed in your role. We don't require you to be in on specific days; instead, we ask people to come into the office 2-3 days each week, for at least 8 days per month. You should work with your line manager to understand what their expectations are for you, your specific role and your team. We’re here to build a network the UK can count on – one that connects people, places and potential. Because no matter where you live, what your background is, or how you get online – we think everyone deserves the same chance to stay connected, and with VodafoneThree, that future’s being built – today. We’re creating more than the UK’s best network. We’re helping close the digital divide, empower communities and drive meaningful progress. We believe that everyone should feel they belong. Whoever you are and whatever your story, there’s space for you here. We’re building a workplace where different perspectives are welcomed, voices are heard, and everyone feels safe to show up as themselves. You’ll join a team that genuinely cares – about each other, about our customers, and about the future we’re building. From day one, you’ll be welcomed, valued and encouraged to bring your whole self to work. Join us and you’ll be at the heart of change. That means building responsibly, investing sustainably and creating opportunities that last. We’re not just expanding connectivity; we’re reimagining what a connected nation looks like. With £11bn invested in 5G and digital infrastructure, your work will directly power businesses, services, and communities across the country. You’ll work on real challenges, with real impact, across every corner of the country. Wherever you join us, whatever your role, you’ll be helping to build a future that works better for everyone. We move at pace, because what we’re building matters – and we’re learning as we go. We’re proud of the progress we’ve made, but we’re just getting started. Join our UK Networks team, where we’re continually building and enhancing our network, connecting millions of people and businesses across the country. Be part of the team that makes it all happen – simplifying, automating, and bringing better connectivity than ever before, with giga-fast speed, to our customers. As Test Lab Manager, you’ll play a pivotal role in shaping and running VodafoneThree UK’s Fixed Network Test Lab environments across Bracknell and Watford. You’ll ensure the labs remain scalable, resilient, and ready to support the testing, integration, and validation of critical network services. Working with a wide range of technical and business stakeholders, you’ll lead infrastructure planning, solution design, operational delivery, and continuous improvement to help drive successful business outcomes and exceptional service quality. • You’ll lead the end-to-end operational management of Fixed Network Test Lab environments, ensuring they remain fit for purpose and ready to support evolving business needs., • You’ll own infrastructure capacity planning across multiple lab sites, forecasting future demand and ensuring space, power, cooling, and environmental requirements can support growth., • You’ll design and implement scalable, resilient lab infrastructure solutions, including cabinet layouts, power systems, and environmental controls., • You’ll oversee installation, move, add, and change (MAC) activities, ensuring quality delivery, accurate configuration management, and minimal disruption to services., • You’ll act as the key escalation point for lab-related issues, coordinating resolution activities and maintaining clear communication with stakeholders., • You’ll analyse performance trends, produce KPI reporting, identify risks, and recommend infrastructure investments that support business objectives and budget requirements., • You’ll collaborate with technical teams, customers, and suppliers to enable high‑quality testing and validation of fixed network services., • You’ll champion compliance with safety, environmental, and technical standards, ensuring all activities meet regulatory and industry requirements., • Proven experience working within telecommunications, network infrastructure, or technical lab environments., • Strong knowledge of capacity management, including power, cooling, and infrastructure planning., • Excellent analytical and problem‑solving skills, with the ability to make data‑driven decisions and manage budgets effectively., • Experience designing and deploying technical infrastructure solutions in complex environments., • Strong stakeholder management and influencing skills, with the ability to build relationships across diverse teams and functions., • A collaborative leader who can coordinate virtual teams and deliver results in fast‑paced, evolving environments., • Good understanding of telecommunications hardware, network infrastructure, and associated technologies., • Hands‑on experience with equipment installation, cabling standards, and physical infrastructure deployment., • Knowledge of Ethernet networking and Layer 1–3 connectivity, including installation, configuration, and fault diagnosis., • Experience working with fibre optic technologies, including testing, installation, and fault finding., • Understanding of infrastructure governance, installation standards, and controlled environment best practices., • Knowledge of DC and AC power systems, battery technologies, RF technologies, and RadHaz safety practices would be advantageous., • A proactive, customer‑focused approach with a passion for operational excellence, continuous improvement, and delivering high‑quality outcomes. Worried that you don’t meet all the desired criteria exactly? We know that everyone is unique, with multiple aspects to their identity and different experiences behind them. We are passionate about Inclusion for All and creating a workplace where everyone can thrive, whatever their personal or professional background. If you’re excited about this role but your experience doesn’t align exactly with every part of the job description, we encourage you to apply as you may be the right candidate for this role or another role, and our recruitment team can help you see how your skills fit in. We care about our people’s success by offering great pay, bonuses, up to 28 days off plus bank holidays, and paid time for charity work. You can personalise our benefits for you and your family, like discounts, vouchers, a pension plan and loads more. We help with your career through our amazing learning tools and top‑notch parental leave policies. We are regulated by the Financial Conduct Authority and all offers of employment for this role are subject to background checks, including criminal (DBS) and financial checks to meet the regulators standards. If you require any reasonable adjustments or have an accessibility request as part of your recruitment journey, for example, extended time or breaks in between online assessments, a sign language interpreter, or assistive technology, please refer to the Accessibility section of our Careers website (uk/reasonable-adjustments/) for guidance. We use AI in different parts of our business to boost innovation, improve efficiency, and create new opportunities. We know many candidates use AI to fine‑tune their CVs or prepare for interviews, but what we really care about is your unique experiences and achievements. During the interview, we want you to rely on your own knowledge and skills to show us who you really are—your personality, creativity, and abilities. Above all, we’re looking for authenticity and can’t wait to get to know the real you. #J-18808-Ljbffr

NewOrbit builds satellites that fly in very low Earth orbit, below 300 km, along with the electric propulsion that keeps them there. Flying closer to Earth means sharper imagery from smaller optics, and an orbit that cleans itself: our satellites de-orbit within a month at end of life, leaving no debris. Our AURA family of RF gridded ion thrusters powers our own NEO-1 satellite, with first flight planned for Q3 2028, and is also offered to other operators. Electric propulsion is what lets our satellites hold very low orbits, and our AURA RF gridded ion thruster is at the centre of it. We are seeking a Structural Engineer to support the design, analysis, testing, and qualification of structures for our VLEO satellite missions. You will work across the full development lifecycle of flight hardware, from early structural modelling and design reviews through environmental testing and validation, helping ensure the reliability and survivability of spacecraft operating in one of the harshest orbital environments. You will work closely with mechanical, thermal, propulsion, systems, and AIT teams to develop structurally robust hardware capable of surviving launch and sustained operations in Ultra-Low Earth Orbit. • Perform structural analysis of flight hardware including spacecraft structures, propulsion subsystems, and mechanical assemblies. This includes static, modal, random vibration, sine, shock, and quasi-static load cases., • Develop and validate finite element models (FEM) for spacecraft and high-performance aerospace structures., • Perform hand calculations for preliminary analysis in support of FEA., • Support structural sizing, stiffness optimisation, and load path analysis for launch and in-orbit environments., • Plan and execute vibration, shock, and structural qualification testing test campaigns end-to-end: write the test plan, instrument the hardware, interpret the data, correlate the model, and close out the qualification report., • Instrument hardware using accelerometers and strain gauges, and correlate test results back to analytical models., • Review engineering drawings and collaborate directly with designers to drive structural design decisions., • Support qualification activities against relevant aerospace and space standards including GEVS, ECSS, and NASA requirements., • Contribute to structural verification activities across development, integration, and test phases., • Education: B.S. or M.S. degree in Aerospace Engineering, Mechanical Engineering, Structural Engineering, or a related field., • 3+ years of structural analysis experience on flight hardware, including spacecraft, launch vehicles, missiles, or high-performance structures., • Experience with structural analysis of a satellite's primary or secondary structure (i.e., the load-bearing bus/frame, not just a subsystem or payload) is strongly preferred., • Experience with structural analysis of spacecraft structures and subsystems, including electronic boxes, propulsion systems, hydraulics, or solar panels., • Experience with design for manufacturing (DFM)., • Hands‑on experience with FEM and ability to justify modelling assumptions and approaches., • Experience with Altair OptiStruct is a strong plus; proficiency with industry‑standard solvers such as NASTRAN, ANSYS, or Abaqus is required., • Familiarity with launch environments including random vibration PSDs, SRS shock spectra, and quasi‑static load factors., • Practical experience supporting environmental testing, including instrumentation with accelerometers and strain gauges and model correlation activities., • Confidence reading and reviewing engineering drawings and working directly with design engineers on structural decisions., • Experience with analysis of composite materials., • Experience with material testing, metallic and composites, • Pioneering space technology - Your work on our RF gridded ion thrusters and VLEO satellite platform will redefine satellite operations and challenge traditional LEO., • Ownership and impact - You'll have a level of ownership that's rare in the space industry, and you'll take part in the full lifecycle of satellite technology., • Equity and competitive salary - Alongside a competitive salary you receive a company ownership stake, so you share in the technology you help build and in our collective success., • Comprehensive benefits - Private health insurance with dental and optical cover, and annual health check-ups., • Hybrid working - One dedicated remote day per week., • Visa sponsorship and relocation support - We sponsor visas and provide relocation support for candidates moving to join us. #J-18808-Ljbffr

NVIDIA’s Worldwide Field Operations (WWFO) team is looking for a Solution Architect with expertise in Generative AI, Data Science applications and Machine Learning (ML) to work with our Hyperscaler partners. In our Solutions Architecture team, we work with the most exciting platform for accelerated computing and drive the latest breakthroughs in artificial intelligence. We need individuals who can enable customer and partner productivity. Our goal is to develop long-lasting relationships with our technology partners, making NVIDIA an integral part of end-user solutions. We are looking for someone who is always thinking about artificial intelligence, someone who can maintain alignment in a fast paced and constantly evolving field. You will be working with the latest NVIDIA technologies coupled with the most advanced CSP infrastructures, changing the way people interact with technology. As a Solutions Architect, you will be the first line of technical expertise between NVIDIA, our Hyperscaler partners and our end-customers. For this role, the primary focus will be on our strategic partnership with Google (GCP). Your duties will vary from working on proof-of-concept demonstrations, to driving relationships with key technical executives and managers to evangelize accelerated computing and Generative AI. Dynamically engaging with developers, researchers, data scientists, IT managers and senior leaders is a meaningful part of the Solutions Architect role and will give you experience with a range of challenges and solutions. Develop and demonstrate solutions based on Hyperscalers and NVIDIA’s pioneering GenAI software and hardware technologies to developers Work directly with key customers and our Hyperscalers partners to understand their challenges and provide the best solutions based on NVIDIA products Perform in-depth analysis and optimization to ensure the best performance on GPU-accelerated systems using NVIDIA software platform. This includes support in optimization of both training and inference pipelines Partner with Engineering, Product and Sales teams to understand developer’s challenges and plan for the best suitable solutions. Enable development and growth of product features through customer feedback and proof-of-concept evaluations Build industry expertise and become a contributor in integrating NVIDIA technology into Enterprise Computing architectures 5+ years of Solutions Architect/Engineering or similar experience in AI-related fields Excellent ability to listen, both verbal and written communication skills, and being comfortable with presenting technical solutions in English Expertise in deploying large-scale training and inferencing pipeline on Hyperscaler’s infrastructure, with a focus on GCP MS/PhD or equivalent in Computer Science, Data Science, Electrical/Computer Engineering, Physics, Mathematics, other Engineering fields A proven track record of academic and/or industry experience in fields related to machine learning, deep learning and/or data science You are excited to work with multiple levels and teams across organizations (Engineering, Product, Sales and Marketing team) You are a self-starter with interest in growth, passion for continuous learning and sharing findings across the team Background with Hyperscaler platforms such as GCP Experience running and optimizing large scale distributed DL training Experience optimizing inference pipeline, using a range of inferencing technics (e.g., understanding of model compression techniques, model compilation or model serving) Background with working with larger transformer-based architectures Experience using DevOps technologies such as Docker, Kubernetes, Singularity, etc. #J-18808-Ljbffr

At OQC, we aren’t just theorising about the future; we’re building it. Born from a philosophy of bold innovation, we’ve successfully transitioned quantum computing from an academic dream into a commercial reality. The most exciting thing is that we’re just getting started and we’ve recently closed our £260 million Series C funding round – the largest fundraise ever completed by a quantum computing company in Europe. As Director of Quantum Error Correction (QEC), you will lead the scientific strategy that enables fault-tolerant quantum computing. Working within our Quantum Science & Exploratory Research (QSER) department, you'll build and inspire world-class research teams, shaping the architectures, algorithms and hardware co-design that will define the next generation of quantum computing. You will lead multidisciplinary teams of QEC Theorists, Architecture Researchers and Quantum Engineers. You'll set the strategic direction for Quantum Error Correction at OQC, ensuring our research translates into practical demonstrations that maximise the performance and scalability of our superconducting quantum hardware. • Build, develop and lead a world-class Quantum Error Correction organisation spanning theory, architecture, numerical modelling, hardware co-design and implementation., • Drive OQC's QEC strategy by developing cutting‑edge error correction and mitigation techniques that reduce logical qubit overheads and strengthen our hardware roadmap., • Translate long‑term company objectives into ambitious, executable research programmes delivered across multiple technical teams., • Partner closely with hardware, software and engineering teams to ensure theoretical advances are grounded in experimental reality and accelerate product development., • Represent OQC as a recognised technical leader, presenting research breakthroughs and logical systems milestones to international conferences, customers and strategic partners., • Own the planning and management of QEC budgets, including simulation infrastructure, software tooling and external technology partnerships., • Mentor and develop technical leaders, fostering a collaborative, high‑performance research culture while removing obstacles and maintaining delivery momentum., • Significant industrial and/or academic experience developing Quantum Error Correction technologies, including bosonic, surface or LDPC codes, logical architectures, decoders or large‑scale numerical simulations., • Proven leadership experience building and managing high‑performing technical or scientific teams, including the development of senior researchers and technical managers., • Experience delivering complex research programmes within multidisciplinary environments spanning quantum hardware, software and experimental physics., • Demonstrated ability to develop long‑term technical strategy, manage competing priorities and translate vision into execution., • Strong collaboration and communication skills, with experience influencing executive stakeholders and cross‑functional engineering organisations., • Experience managing technical budgets, external collaborations and strategic research partnerships., • PhD in Physics, Mathematics, Computer Science, Electrical Engineering or another relevant scientific discipline, with a strong focus on Quantum Information Theory or a related field., • Commercial experience developing quantum computing technologies., • Experience designing or implementing quantum or cryogenic systems., • Knowledge of superconducting qubit architectures or cryogenic engineering., • Experience owning end‑to‑end technical project delivery in fast‑paced R&D environments., • Strong roadmapping, external partnership management and technical presentation experience., • Experience coordinating multiple large technical teams delivering complex scientific programmes. You will join a world‑class team at the forefront of the next computational era. We offer a culture of bold innovation, the chance to work with unique lab infrastructure, and the opportunity to see your work redefine the limits of computation. Learn more about our benefits and positive work culture here: https://oqc.tech/company/careers-at-oqc/ #J-18808-Ljbffr

At OQC, we aren’t just theorising about the future; we’re building it. Born from a philosophy of bold innovation, we’ve successfully transitioned quantum computing from an academic dream into a commercial reality. The most exciting thing is that we’re just getting started. As a Senior RF Engineer, you will design, develop, and optimise the RF systems that underpin OQC’s quantum computing platform. Working at the intersection of cutting-edge hardware, systems engineering, and quantum technology, you'll solve complex RF challenges that improve the performance, reliability, and scalability of our quantum computers. You’ll be a technical specialist within our Advanced Product Development team, leading the design and validation of RF and microwave solutions that enable quantum control and readout. Working closely with multidisciplinary engineering teams, you'll take ownership of RF hardware development from concept through to deployment, helping shape the future of commercially viable quantum computing. • Architecting and delivering RF control, readout, and packaging solutions that meet demanding system performance requirements., • Designing, simulating, testing, and optimising RF and microwave circuitry using modelling tools and laboratory-based experimentation., • Leading RF characterisation activities, including microwave I/O analysis, filtering design, signal-to-noise optimisation, and performance validation., • Investigating complex technical issues, driving root-cause analysis, and implementing data-led design improvements., • Collaborating with hardware, systems, and cryogenic engineering teams to ensure successful integration across the quantum computing stack., • Managing technical engagement with RF suppliers, evaluating components, and supporting hardware quality assurance activities., • Providing technical leadership, mentoring engineers, and contributing to roadmap planning, delivery forecasting, and engineering best practices., • Proven experience developing RF and microwave hardware solutions., • Strong RF design, simulation, and modelling expertise., • Experience with RF laboratory testing, validation, and characterisation methodologies., • Demonstrated ability to solve complex technical and system integration challenges independently., • Experience working across multidisciplinary engineering environments., • Strong data analysis, stakeholder communication, and technical documentation skills., • Ability to balance technical trade-offs, risk, manufacturability, and performance requirements., • Experience engaging with suppliers and technical partners., • Technical leadership capability, including project ownership and mentoring of engineers., • Degree in Electronics, Physics, Engineering, or a related discipline, or equivalent practical experience., • Postgraduate qualification in RF Engineering, Microwave Engineering, Electronics, Physics, or a related discipline., • Experience leading complex technical projects or work packages., • Experience within advanced technology, research, or highly regulated environments., • Knowledge of project planning, risk analysis, and process improvement methodologies., • Python scripting experience., • Strong influencing, adaptability, creativity, and leadership skills. You will join a world-class team at the forefront of the next computational era. We offer a culture of bold innovation, the chance to work with unique lab infrastructure, and the opportunity to see your work redefine the limits of computation. Learn more about our benefits and positive work culture here: company/careers-at-oqc/ Interviews will commence from the 18th June. #J-18808-Ljbffr

Shape the architecture behind advanced virtual engineering environments supporting sensitive UK defence and aerospace programmes. Synergize Consulting is seeking an experienced Enterprise Architect to play a pivotal role across Synthetics, ITEA and TLS digital engineering. This is an opportunity to influence how digital twins, real-time simulation and virtual testing come together across the full systems engineering lifecycle. You will lead the integration of a Virtual Environment solution into the wider Digital Engineering environment, bringing together people, processes and technology. Working closely with engineering teams, Product Owners and Delivery Managers, you will turn complex requirements into secure, practical architecture that supports testing, qualification, certification and training. Your architecture will help engineering teams identify integration issues earlier through Software-in-the-Loop and Hardware-in-the-Loop testing. You will also shape the digital twin and digital thread capabilities connecting the wider engineering environment. Combining strategic influence with detailed technical design, your responsibilities will include: • Developing and maintaining high-level and low-level designs., • Leading Virtual Environment architecture across the full system lifecycle., • Aligning solutions with Secure by Design principles, governance and regulatory requirements., • Advising stakeholders on architectural decisions, dependencies and delivery risks., • Identifying opportunities to reuse architecture across digital engineering workstreams., • Preparing and managing RFIs and RFQs, evaluating technologies and supporting proofs of concept., • Working with internal teams, suppliers and technology partners to deliver a coherent architecture. We are looking for an architect who can connect enterprise strategy with engineering delivery and communicate confidently with both technical and non-technical stakeholders. You will need: • Active SC clearance or DV clearance, • Demonstrable aerospace and defence experience, delivering architecture within MOD, Defence Digital or UK aerospace environments., • More than five years experience in Enterprise or Business Architecture., • Experience of real-time simulation, digital twins and digital thread concepts., • Experience architecting IT and software development environments., • A strong understanding of system, data and technical architecture across the systems engineering lifecycle., • Experience working with defence prime contractors, system integrators and suppliers., • Strong stakeholder management skills and experience working in Agile environments., • A relevant degree and industry certification(s), such as TOGAF, ArchiMate, AWS/Azure Architect or CISSP., • Availability to work onsite in Reading for at least 50% of your time. Flight simulators or synthetic environments; Microsoft Azure; SAFe; CI/CD and DevSecOps; Docker or Kubernetes; Power BI; data warehousing; or Chartered Engineer status. This role offers the chance to influence architecture with a direct impact on how complex aerospace and defence systems are engineered, integrated and tested. You will work at the intersection of enterprise architecture and advanced simulation, helping translate emerging technology into practical engineering capability. #J-18808-Ljbffr

At OQC, we aren’t just theorising about the future; we’re building it. Born from a philosophy of bold innovation, we’ve successfully transitioned quantum computing from an academic dream into a commercial reality. The most exciting thing is that we’re just getting started and we’ve recently closed our £260 million Series C funding round – the largest fundraise ever completed by a quantum computing company in Europe. As Head of Experimental System Integration, you'll lead the development of the sophisticated experimental platforms that enable OQC to push quantum computing forward. Bringing together quantum processors, cryogenics, control electronics and HPC/real-time decoding, you'll build the integration capability that accelerates our R&D cycles and helps scale OQC towards fault-tolerant logical quantum computing. Leading our Experimental System Integration function, you'll operate at the intersection of experimental physics, hardware development and embedded software engineering. You'll own the architecture and integration of our R&D testbeds, lead and develop a highly technical team, and work across OQC's research programmes to turn ambitious scientific objectives into reliable, high-performance experimental systems. Reporting to the VP Research, you'll also shape the team's technical roadmap, lead complex research projects and provide clear recommendations on priorities, resources and investment. • Lead the architecture and end-to-end integration of experimental quantum hardware testbeds, bringing together quantum processors, cryogenics, control electronics, firmware and HPC., • Define technology-transfer pathways that turn emerging, high-TRL components and subsystems into stable, high-throughput experimental platforms., • Embed across OQC's R&D programmes, translating research objectives into clear system requirements and integration strategies., • Establish system-level verification, bring‑up and validation standards that deliver repeatable, high-performance experimental operation., • Build and lead a high-performing technical team, owning recruitment, objectives, performance, coaching and long‑term capability development., • Own the Experimental System Integration roadmap and delivery of complex research projects, coordinating resources and work across multiple technical teams., • Drive operational excellence across experimental systems, improving tooling, diagnostics, uptime, throughput and repeatability while supporting external technical collaborations., • A deep technical background in quantum hardware, cryogenic systems engineering, superconducting qubits or a closely related field., • Commercial experience within a relevant technical or scientific environment., • Experience leading and developing a technical team of approximately 5–10 people within a fast-changing organisation., • Proven ownership of the full lifecycle of complex technical projects, from requirements and architecture through integration and delivery., • Strong hands‑on understanding of cryogenic system operation and electrical measurement., • Strong leadership, delegation, project planning, data analysis and technical reporting capability., • The ability to influence across disciplines, communicate complex technical concepts clearly and guide teams through challenging technical problems., • Experience coordinating multiple technical teams to deliver against complex research or engineering objectives., • PhD or equivalent commercial experience., • Experience designing and implementing quantum or cryogenic systems., • Experience working across a range of quantum or cryogenic system architectures., • A track record of designing and delivering complex technology to specification., • Experience coordinating larger multidisciplinary teams to produce complex technical outcomes. You will join a world‑class team at the forefront of the next computational era. We offer a culture of bold innovation, the chance to work with unique lab infrastructure, and the opportunity to see your work redefine the limits of computation. Learn more about our benefits and positive work culture here: company/careers-at-oqc/ #J-18808-Ljbffr