Production support jobs in Westhoughton - Page 3Create job alerts

Production Supervisor - Nights (FMCG) Location: Bolton Salary: £38,640 per year Shift: Night Shift - Monday to Thursday 10am to 6am, Friday 8pm to 3am Stafforce Recruitment are recruiting for a Production Supervisor to join a well-established FMCG manufacturing site on a permanent night shift. This role is ideal for an experienced production leader who is confident managing teams in a high-volume, fast-moving food production environment while maintaining strict standards in safety, quality, and efficiency. The Role As the Night Shift Production Supervisor, you will take full ownership of your shift, ensuring production runs safely, efficiently, and in line with FMCG food manufacturing standards. You will be responsible for delivering daily production targets, maintaining food safety compliance, managing labour costs, and driving continuous improvement across your area. This role requires a hands-on leader who can motivate teams, manage performance, and ensure the site consistently delivers right-first-time production in a fast-paced environment. Key Responsibilities Lead the shift to ensure safe, efficient, and compliant food production operations Ensure full adherence to food safety standards, hygiene regulations, and site procedures Deliver the daily production plan, ensuring shift performance achieves >90% conformance Monitor line performance, throughput, and capacity to maximise productivity Take ownership of quality performance, investigating complaints and non-conformances Drive a right-first-time culture to minimise waste and rework Lead continuous improvement initiatives to improve efficiency, reduce waste, and control costs Manage labour planning, staffing levels, and absence management Conduct return-to-work interviews and support employee wellbeing Develop and coach production team members to improve skills, performance, and engagement Lead shift communication meetings, reviewing KPIs across safety, quality, delivery, and cost Ensure the factory environment meets the high hygiene and operational standards required in food manufacturing What We're Looking For Essential Experience supervising teams within FMCG or food manufacturing Strong knowledge of production processes in a high-volume manufacturing environment Understanding of food safety, quality standards, and hygiene requirements Experience managing and motivating teams within a fast-paced production environment Knowledge of process improvement and cost control Strong organisational, communication, and leadership skills IT literateDesirable Experience working in a unionised manufacturing environment Formal qualification in manufacturing, production, or engineering About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

We are looking for a Production Engineer to join a well established UK manufacturer based in Bolton that is part of a global organisation. The successful candidate will play a key role in supporting production and engineering teams. As a Production Engineer, you will ensure products are manufactured to specification, support new product introduction, maintain tooling and fixtures, and drive continuous improvement initiatives. This role offers a hands on opportunity to work closely with multiple departments and contribute to the efficiency and quality of manufacturing processes. Salary: £36,000 – £42,000 per annum (dependent on experience). Hours: Monday–Thursday 07:30–16:00, Friday 07:30–12:50 (38 hours per week). As a Production Engineer, your main duties will include: * Managing the lifecycle of production tooling and fixtures, including maintenance, calibration, and ongoing optimisation. * Creating, editing, and validating CNC programs using Fanuc, Heidenhain, or Siemens systems. * Optimising CNC milling and turning operations, from method selection to cycle time reduction and quality assurance. * Leading continuous improvement initiatives with measurable targets, including cycle time, scrap, changeover, and right-first-time performance. * Designing and implementing jigs and fixtures to improve repeatability, ergonomics, and shop floor safety. * Providing hands-on support for setup issues, technical bottlenecks, and process deviations. * Training operators and setters on new tooling, CNC programs, and best practices. * Maintaining accurate technical documentation including tool sheets, routings, BOMs, and manufacturing drawings. * Collaborating with Planning, Design, Quality, and Maintenance teams to ensure smooth production flow. * Supporting industrialisation and introduction of new products into manufacturing. Requirements: * HND, HNC, Degree, or equivalent in Mechanical, Manufacturing, or related engineering discipline. * Experience in production or manufacturing environments. * Proficiency in using lathes and milling machines. * The ideal Production Engineer will be proactive, technically confident, and focused on improving manufacturing processes. * Experience with CNC programming on Fanuc, Heidenhain, or Siemens systems. * Skilled in using standard power tools (drill, grinder, jigsaw). * Ability to read and interpret technical drawings. * Strong problem-solving skills with a practical, hands-on approach. * High attention to detail and good organisational ability. * Effective communication and teamwork skills. * Familiarity with continuous improvement techniques. * Experience using CAD software (e.g., SolidWorks, AutoCAD Inventor) is desirable but not required. Production Engineer Benefits: * 25 days holiday plus bank holidays. * Company pension scheme. * Cash Health Plan and Employee Assistance Programme, Cycle to work scheme, Life assurance. * Full training and ongoing support. * Opportunities for career progression. * Friendly and inclusive working environment. * Free onsite parking. This Production Engeering role is being advertised by S&D Trade Recruitment who are operating as an employment business and are acting as an employment agency on behalf of our client. Please apply with currrent CV and ask for Shelley in the office

Sales and Customer Development Representative Department: New Door and Part Sales Reports To: Sales Director Overview As a key member of our internal sales team, the Sales Development Representative will play a central role in supporting our customers and strengthening long-term relationships. This position is ideal for someone who thrives on communication, enjoys problem-solving, and is committed to delivering exceptional service to both new and existing customers. A pro-active approach to generating new business, customer engagement and internal collaboration is essential. Key Responsibilities: Act as a first point of contact for customer enquiries, providing accurate product information and professional guidance. Maintain strong, positive relationships with existing customers through proactive communication and outstanding service. Process quotations, sales orders, and follow-ups in a timely and efficient manner. Actively chase and follow up quotations to customers, ensuring responses are obtained and progressed in a timely and professional manner. Pro-actively engage with customers to understand their needs and recommend suitable solutions aligned with our product offering. Collaborate with production, operations, and technical teams to ensure smooth order progression and prompt delivery. Assist with the development and implementation of social media content and campaigns to support brand visibility and customer engagement. Support the Sales Director with updates, customer feedback, and administrative tasks. Maintain up-to-date knowledge of our industrial door and shutter product range. Contribute to continuous improvement initiatives within the sales department. Skills and Attributes: Exceptional communication skills, both verbal and written, with the ability to engage confidently with customers. Strong customer-focused mindset and a genuine commitment to delivering a high-quality service experience. Highly pro-active with the ability to anticipate customer needs and act on opportunities without prompting. Ability to build and maintain long-term customer relationships. Excellent organisational skills and attention to detail. Ability to work in a fast-paced environment while managing multiple tasks. Problem-solving mindset with the ability to stay calm under pressure. Proficient in CRM systems and general IT software. Experience and Qualifications: Previous experience in internal sales, customer service, or a similar role (ideally within manufacturing or construction industries). Knowledge of industrial doors, shutters, or related products is an advantage, but training will be provided. What We Offer: Competitive salary and performance-related incentives. A supportive, collaborative working environment. Opportunities for professional development and industry-specific training. The chance to be part of an established, growing manufacturer with a strong reputation in the industry

Machine Minder & Mixing Operative Opportunities - Food Manufacturing Location: Bolton, BL3 4DU Pay: £12.74-£14.01/hr (+ Overtime at £15.92/hr) Shifts: Monday-Friday (06:00-14:00 / 14:00-22:00 / 22:00-06:00) GI Group is recruiting for one of Bolton's leading food manufacturing Client! Due to expansion, there are immediate openings for Machine Minders and Cream Room/Bakery Mixing Operatives. Successful candidates will have the opportunity to secure a permanent contract. Key Responsibilities: Operate and set up production line machinery, ensuring consistent and high-quality output. Support the mixing crew by combining raw materials per formula specifications and maintaining batch documentation. Organise and maintain a sanitary work area. Adapt to various duties as needed by production management.Desirable Skills: Comfortable working with minimum supervision. Good communication and basic maths skills. Physically able to handle repetitive tasks and move items up to 50 pounds. Flexible, team-oriented approach.Ready to join a fast-growing team in a dynamic environment? Apply today with GI Group and advance your career in food manufacturing! Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, pledge members for Neurodiversity in business, Disability committed members, Silver status pledge members for the Armed Forces Covenant, and Bronze trail blazers for Racial Equality matters. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Bolton We are Electronic Engineering. We are growing, dedicated, and we work as a team to design & develop our advanced electronic solutions for MBDA products. Salary: Circa £42,000-£48 , 000 depending on experience Location: Bolton Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: · Company bonus: Up to £2,500 (based on company performance and will vary year to year) · Pension: maximum total (employer and employee) contribution of up to 14% · Overtime: opportunity for paid overtime · Flexi Leave: Up to 15 additional days · Flexible working: We welcome applicants who are looking for flexible working arrangements · Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments · Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... . Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: • We are Electronic Engineering. We are growing, dedicated, and we work as a team to design & develop our advanced electronic solutions for MBDA products., • Your role as an Electronics Engineer is to develop electronic solutions for cutting-edge systems. This will mainly include; Design, qualification and certification activities across the whole product lifecycle for Land, Sea, and Air platforms, • This role offers various types work, challenges, and a multitude of applications; typically this includes: reviewing requirements; generating a concept solution, schematics, and manufacturing data packs; involvement in component & COTS (commercial off-the-shelf product) selection; design, test, qualify to meet high-reliability & harsh environments; technical report writing; involvement supporting investigations and our colleagues in manufacturing. You can work in our labs and get hands-on working on bread-board demonstrators through to flight standard hardware., • This is a fantastic opportunity to shadow our more experienced Electronics Engineers & Technical Leads, learn from them and the teams around you before leading your own projects and developing to a Senior Electronics Engineer or Tech Lead., • We respect new perspectives and experiences, and we value our collaborative ways of working.We are committed to growing and supporting diversity in our workforce and ensuring everyone has equal opportunity to reach their potential. We believe that any individual with a learning mindset and belief in what we docan make a difference here. What we're looking for from you: • We are looking for proactive individuals who are motivated to develop within their Senior Electronics Engineer role;, • Candidates would be ideally degree qualified (electronics engineering, science, physics) or HND equivalent experience, have been involved in development of electronics products, and ideally, have a background in complex electronics and working in a multi-functional team (e.g. with mechanical, firmware, and software)., • You will have a sound track record in electronic design capability throughout the product life cycle, i.e. early concept through to production; be organised with an eye for detail and a sense of pride in what you deliver., • Most important for us is that you have the right attitude and a passion to develop - we can offer the training and support you need to enable you to broaden your skills and experience and take steps towards senior roles and onwards. We offer a clear progression path and will give you support for career growth and development. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton This is a unique opportunity for an experienced Electrical Architect to join the MBDA Weapon System Equipment team and work to support the delivery of a range of product capabilities for the needs of domestic and emerging export customers. You'll be working as part of a world-class design team to sustain and develop our products, both in-service and development: incorporating new ideas, functionality and technology to deliver to our customers. Salary: Up to £65k dependent on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: Your role will be to develop and define the electrical architecture and requirements of the equipment for all areas of the Weapon System solution, supporting analysis and decomposition to the lower-level sub-system elements and managing all technical elements of the Electrical Power and Control Equipment. Customer requirements in the Land and Maritime Domains will be challenging you to deliver within the constraints of limited physical space and harsh operating environments. Through your regular interaction with stakeholders and customers, using your communication, influencing and leadership skills you will be developing the product development demands with the delivery team, whilst focusing on the overall product picture to enable the 'On Time, On Cost, On Quality' of the technical solution. Maintaining an adaptable outlook in an ever-changing, competitive and challenging working environment will be an advantage. What we're looking for from you: The successful candidate will hold a qualification equivalent to or greater than a City & Guilds Level 3 award covering the requirements for Electrical Installations. Educated to HND Level 4 (or an equivalent qualification) will be advantageous and with appropriate experience, in electrical engineering, having obtained practical application knowledge in the following areas: Electrical Installation Design (in areas other than Building Regulations Part P), covering Extra Low and Low Voltages, and grounding/earthing, screening, and bonding schemes; Certification of installations in accordance with wiring regulations (BS 7671 or equivalent) - specifically for mobile or transportable systems; Design of electro-mechanical machinery and handling equipment in safety critical and complex electromagnetic environments; Platform and Vehicle based power supply, distribution, and management (civil or military); Design and implementation of "Uninterruptable" power systems (desirable); Hands on experience with electrical installations, machinery, testing of electrical installations, testing of equipment(s), trials work.An Electrical Architect within the Weapon System Equipment Capability team will be responsible for: Designing the initial electrical architecture for emergent and early lifecycle projects; Maintaining the electrical definition and requirements at later stages of the lifecycle, including production Delivering the technical and certification documentation, including safety related certification and UKCA/CE declaration; Supporting the functional integration of the hardware within the wider sub system definition; Promoting the wider capability definition of electrical architects within MBDA. Providing certification and sign off expertise for electrical architecture in projects delivered internally and to external customers at all project lifecycle phases;Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. Salary:Up to £57,000 dependent on experience + bonus + benefits What we can offer you: Company bonus of up to £2,500 (based on company performance and will vary year to year) Pension of maximum total (employer and employee) contribution of up to 14% Paid overtime Up to 15 days flexi leave 25 days annual leave (plus holiday purchase) Possible relocation available Fantastic site facilities, including subsidised meals, free car parking and more Excellent career progression and development opportunitiesHybrid working pattern: Primarily office based (Bolton) with some opportunity for homeworking Want to be part of a successful team working to develop new and innovative seeker solutions to address complex customer requirements? Then keep reading .... The opportunity: An opportunity exists for a Electronic Engineer with broad based skills, including a strong background in RF engineering, to take a key role in the design support of seeker products being produced in our manufacturing facility based at Bolton. The Seeker Division designs and develops state of the art RF and Dual Mode (RF and IR) seekers for use in guided missile programmes. The role requires a high degree of enthusiasm and a determination to work autonomously to support the delivery of products to the right standard and within the required timescales. The role: Acting as a design team representative to interface with the design and manufacturing teams to transition a seeker from the development phase into series manufacture. Work with manufacturing on process and capability issues & support continuous improvement initiatives to maximise production yields. Support non-conformance management, dealing with design queries and advising on non-conformances where appropriate. Support manufacturing with internal and external suppliers. to aide the manufacturing team & ensure continuity of supply. Support obsolescence management by providing recommendations to the design team.What we're looking for from you: We are looking for an Electronic Engineer with the initiative and the determination to investigate and resolve production problems. A broad-based engineering background would be essential to the role and a detailed knowledge of RF assembly and test procedures would be advantageous. The successful applicant will be able to manage their own workload, interact well with both the design and manufacturing teams, work on project changes in a timely manner & maintain the production schedule. The team: The factory based Design Support Team assists with a variety of different seeker projects - no two working days will be the same! The Design Support Team interfaces with both the Stevenage design team & Bolton manufacturing teams, to help with highly technical problem solving. There are also strong relationships with external suppliers who provide sub-assemblies into the seeker build.Our Business: We respect new perspectives and experiences, and we value our collaborative ways of working. We are committed to growing and supporting diversity in our workforce and ensuring everyone has an equal opportunity to reach their potential. We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. We also welcome applicants who are looking for flexible working arrangements. Follow us on LinkedIn (MBDA), Twitter (@MBDAcareers), Instagram (lifeatMBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. Please Note: MBDA UK Limited requires all employees to achieve the required medical and national security clearance for their role. Further restrictions and/or limitations relating to nationality and/or rights to work may also apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. Due to the nature of our business, this particular vacancy requires the applicant as a minimum to be a British Citizen or a Dual UK national with British citizenship and capable of achieving the clearance levels mentioned above. #LI-SF1

Are you interested in the industrialisation of a Manufacturing Architecture, inspection and test plan, if so this role may be suitable for you. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 3 or 4days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: The Principal Manufacturing Engineer - Industrialisation is responsible for developing a manufacturing system and process, alongside the creation of manufacturing and test instructions, FMEA's and Phase Gate reviews, with various technical aspects of Manufacturing. This will involve leading continuous improvement activities, preparation for IVM & VMS certification, risk aversion strategies and efficient non-conformance management methodologies to align with team priorities. The opportunity will also allow you to grow your knowledge within manufacturing as part of development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future principles are some of the work packages that provide stretched objectives for such growth. Develop manufacturing systems and processes in response to the defined Manufacturing Architecture and the Manufacturing, Inspection and Test Plan. Creation and approval of manufacturing and test instruction documentation. Process FMEA and process capability proving. Lead Industrialisation aspects of Product Gate Reviews Oversee obsolescence from a manufacturing Business unit perspective Lead Spiral Development activities for Business unit / Project Lead and support Continuous Improvement initiatives to ensure the area of responsibility is continually developing to improve efficiency. Lead business unit Rate increases requirements. Support the Manufacturing Engineering Manager during the preparation and proving of the Production System for IVM & VMS certification Risk identification and aversion strategies associated with technical definition and manufacturing methodologies. Development, maintain and control technical interfaces to customers, suppliers and collaborators to ensure effective and swift resolution of technical issues. Effective Non-Conformance management and corrective action. Manufacturing focal point at key meetings to report progress of Engineering actions and align team with programme priorities.What we're looking for from you: Degree/HND level of qualifications or equivalent in a relevant subject Experience of the product development lifecycle in an electronics environment. Sound awareness of PLC2. Good Manufacturing knowledge achieved through experience and understanding of industry best practice. Ability to influence across a team of functional professionals. Budgetary management trained.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

This is a fantastic opportunity for an experienced Test Equipment Design Engineer to join our Production Design Support Team. You will play a leading role in a range of Engineering activities, providing Test Equipment design support to the Manufacturing organization and broadening your expertise in an international environment. An exciting career path awaits! Job Title: Test Equipment Design Engineer, Production Design Support Salary: Circa £48,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We have a phenomenal opportunity for an experienced Test Equipment Design Engineer to play a leading role in the support of production activities with Production Design Support (PDS) at our site in Bolton. You will act as an integral interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers. What we're looking for from you: Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring. Someone with a passion for innovation and collaboration. Experienced engineer who will be prepared to work autonomously if needed, leading the delivery of your work assignments and actively engaging with stakeholders to ensure successful delivery of your outputs. Solid experience of managing discreet work packages preparing bids, controlling costs and delivering solutions. Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. Full Product Lifecycle knowledge or experience Willingness to provide support to and mentor other Engineers and Engineering Technicians.Proven experience in the design of one or more of the following disciplines:- RF and Antenna Design Electrical Architecture Design for Safety and Integrity RF Test and measurement principle knowledgeOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Important: All applicants must be able to obtain Security Clearance and must hold British Nationality as their sole nationality. Working: The role offers flexible & hybrid working. It would be beneficial to be on-site 2-3 days a week, depending on the project needs and working remotely other days. • An opportunity exists for an Electronic Engineer with broad based skills, including a strong background in RF engineering, to take a key role in the design support team in the manufacturing facility. - The Design Support Engineer designs and develops state of the art RF and Dual Mode (RF and IR). The role requires a high degree of enthusiasm and a determination to work autonomously to support the delivery of products to the right standard and within the required timescales. - The Design Support Engineer is factory based and will assists with a variety of different projects. The Design Support Team interfaces with both the design team & manufacturing teams, to help with highly technical problem solving. There are also strong relationships with external suppliers who provide sub-assemblies. - Role Requirements; Acting as a design team representative to interface with the design and manufacturing teams to transition from the development phase into series manufacture. Work with manufacturing on process and capability issues & support continuous improvement initiatives to maximise production yields. Support non-conformance management, dealing with design queries and advising on non-conformances where appropriate. Support manufacturing with internal and external suppliers. to aid the manufacturing team & ensure continuity of supply. Support obsolescence management by providing recommendations to the design team. - Skill and Experience; We are looking for an Electronic Engineer with the initiative and the determination to investigate and resolve production problems. A broad-based engineering background would be essential to the role, and a detailed knowledge of RF assembly and test procedures would be advantageous. The successful applicant will be able to manage their own workload, interact well with both the design and manufacturing teams, work on project changes in a timely manner & maintain the production schedule. - Desirable Experience; Experience in the Defence or safety regulated environment would be advantageous Experience in the Naval / Maritime domain would be advantageous. - Even If you feel like you don't meet every qualification, we encourage you to reach out an apply. - Company Benefits; Bonus: Up to £2,500 (based on performance). Pension: Up to 14% total contribution. Parental Leave: Enhanced parental, maternity, and shared parental leave. Flexi Leave: Up to 15 additional days. Facilities: On-site perks like subsidised meals and free parking. Training and Development: Excellent opportunities for career progression and skill development • Company Details; The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business! It's no wonder, they have been among the winners of the annual Glassdoor Employees' Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People! "Interesting work. Good work-life balance. Employees made to feel valued." Software Engineer, 5 Dec 2022. *Glassdoor review. "Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities" Principal Systems Engineer, 19 Dec 2022. *Glassdoor review. True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion. Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. - For full information, please get in touch

Goods Inwards / Incoming Quality Inspector (Stores & Manufacturing) Bolton | Onsite | Defence Manufacturing Why apply? An opportunity supporting a major UK defence programme Clearly defined role focused on goods inwards & stores inspection (not bench/final inspection) ________________________________________ The opportunity As a trusted partner to the UK Ministry of Defence, our client is seeking an experienced Goods Inwards / Incoming Quality Inspector to join their established manufacturing site in Bolton. This role is critical to ensuring all incoming materials and components meet purchase order, contractual, and quality requirements before entering production. You will play a key part in protecting compliance, supporting manufacturing schedules, and maintaining the highest standards within a safety critical, regulated environment. ________________________________________ What youll be doing Inspect and verify all incoming goods against purchase orders, delivery notes, and quality documentation Formally accept procured products in line with approved standards and contractual conditions Read and interpret engineering and assembly drawings, including dimensional tolerances and machined features Inspect components for damage, surface finish, paint defects, and first off requirements where applicable Complete, maintain, and update accurate inspection and quality records, ensuring full traceability Validate delivery paperwork and system entries to support audit and compliance requirements Meet agreed inspection turnaround times to support manufacturing demand Identify, segregate, and control non conforming material, raising and maintaining NCRs as required Support product verification and approval activities, including audits and PCB inspection where applicable Maintain compliance with manufacturing, quality, and safety procedures while contributing to a safe, organised working environment ________________________________________ What were looking for Essential experience Proven goods inwards, incoming inspection, or stores inspection experience within a manufacturing or regulated environment Strong understanding of inspection requirements for safety critical components Experience managing receipt, verification, traceability, and non conformance control Confidence working with inspection documentation, delivery paperwork, and quality records Please note: This role requires goods inwards / stores inspection experience. Final or bench mechanical inspection experience alone is not suitable. Qualifications (one of the following) Level 3 Electrical/Mechanical Engineering or Manufacturing Apprenticeship, or Level 3 Electrical/Mechanical Engineering or Manufacturing qualification (e.g. NVQ, ONC, Diploma or equivalent). Qualifications must meet the required standard for the role. Additional skills Manual handling and ESD awareness SAP experience is desirable but not essential ________________________________________ Security clearance British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. ________________________________________ About the site The Bolton facility is one of the North Wests leading manufacturing sites, supporting defence programmes for over 25 years. The site offers: Onsite canteen Free parking, showers, and bike racks Convenient motorway access ________________________________________ What happens next? Once you apply, and if your application meets the selection criteria, a member of the talent acquisition team will contact you to arrange a structured screening call. This conversation will explore your experience and suitability for the role in more detail. TPBN1_UKTJ

Company description: At Warburtons, family is at the heart of our business. Five generations'? worth of expertise that goes into making our bakery products allows us to continue a tradition of baking inherited over the past 150 years. Warburtons is the largest bakery brand in the UK, but that doesn't allow us to rest on our laurels. We are pioneers of the industry and ambitious market leaders, always seeking to challenge ourselves and convention. It is part of our philosophy to provide honest good sense on issues of health and well-being, helping the whole family to enjoy our products as part of a healthy, balanced diet, through a range of products to suit all meal occasions, lifestyles and tastes. Job description: Job Title: Engineering Team Leader Location: Bolton Contract: Permanent Working pattern: 4 on 4 off Salary: Up to £60,000 Are you an Engineering Team Leader or Lead Engineer with experience of working in a manufacturing environment and looking to progress or up for a new challenge? Due to continued growth and investment in our Engineering-led manufacturing sites, we have an opportunity for an Engineering Team Leader to support our bakery in Bolton. As a key part of our Engineering team, you'll engage and motivate a skilled team of engineers, utilising root cause analysis to identify and prioritise corrective, preventative, predictive and mitigating actions. The Recipe At our Bakery here in Bolton, the team are dedicated to delivering unbeatable quality in a safe manner with highly reliable equipment. We are proud to be leading and developing a collaborative, creative and responsive team at the cutting edge of engineering innovation. In this role you will lead, motivate, and manage a team of multi skilled engineers to drive a culture that delivers plant reliability, product quality, and safety in line with company standards. Working with the Engineering Manager you will have accountability for delivering the engineering strategy, via planned, corrective and reactive maintenance work. The Role Reporting to the Engineering Manager youll provide both hands-on technical support and day-to-day leadership, driving a culture of safety, teamwork, and continuous improvement. Lead, coach, and develop a team of engineers, ensuring high standards of performance, engagement, and professional development. Coordinate and deliver planned, preventative, and reactive maintenance to minimise downtime and improve line efficiency. Ensure all engineering activities are carried out safely, in line with company policies, Health & Safety regulations, and Food Safety standards. Manage priorities using the sites CMMS system logging, tracking, and closing work orders accurately. Conduct root cause analysis (RCA) and implement corrective actions to prevent reoccurrence. Support continuous improvement initiatives, driving reliability, efficiency, and cost savings. Collaborate closely with Production, Quality, and Technical teams to ensure smooth daily operations. Participate in audits, compliance checks, and engineering project delivery. Lead by example, promoting a proactive, problem-solving culture within the team. Essential Ingredients Qualifications & Training Time-served Engineering Apprenticeship, HNC/HND, or Degree in Mechanical, Electrical, or Multi-skilled Engineering. Evidence of ongoing professional development and leadership training. Experience Proven experience in a maintenance or leadership role within an FMCG, food, or manufacturing environment. Strong background in managing, motivating, and developing engineering teams. Experience using CMMS systems and good general IT literacy (Microsoft Office, data reporting tools, SAP). Knowledge & Skills Strong understanding of engineering safety, risk assessments, and permit-to-work systems. Knowledge of Food Safety, Hygiene, and GMP standards. Excellent problem-solving and root cause analysis skills. Effective communicator with the ability to work cross-functionally and build strong working relationships. Well-organised, adaptable, and capable of managing multiple priorities in a high-pressure environment. A passion for continuous improvement and developing people. Extra Dough At last and by no means least you will want to know what your breads worth. A slice of the annual profits (discretionary profit share) Family time is important to us so as well as your holiday entitlement, we'll give you the opportunity to purchase up to an extra weeks annual leave Award winning pension scheme with company contributions of 7% Life assurance Products you will love along with deals and discounts for you and the family through our Extra Dough website Continued investment in your personal development Fully stocked kitchens filled with our delicious products for you to enjoy with your daily brew! Support for your health and wellbeing, including access to free physiotherapy, 24/7 access to a confidential helpline for practical advice and a comprehensive occupational health service We respect and value difference. We look to create an inclusive workplace that promotes and values diversity. Companies that are diverse in age, gender identity, race, religion, sexual orientation, physical or mental ability, ethnicity, or any other aspect which makes them unique, are proven to be better companies. More importantly, creating an environment where everyone, from any background, can do their best work, is the right thing to do. TPBN1_UKTJ

CNC Programmer / Manufacturing Engineer (Training & Progression) £36,000 - £45,000 + Technical Training + Career Progression + 33 Days + Profit Bonus + Life Insurance + Cash Health Factory based, commutable from Bolton, Farnworth, Kearsley, Little Lever, Walkden, Radcliffe, Bury, Swinton, Salford and Manchester and surrounding areas Are you from a CNC background looking to drive process improvements whilst being heavily invested in through technical training, scope to progress your career all whilst overseeing and improving bespoke manufacturing lines where you will work towards becoming a technical expert? This is an exciting opportunity to join a highly technical team with the vision of progressing into a lead position and become a go to specialist, through excellent training and support all whilst overseeing exciting projects and having a crucial impact on their success. This company have over 70 employees but are part of a global group, they are rapidly expanding, due to company investment and are looking for a Production Engineer to join their company and become a part of their close-knit team. This role will suit someone from a CNC background looking to drive process improvements whilst being heavily invested in through technical training, scope to progress your career all whilst overseeing and improving bespoke manufacturing lines where you will work towards becoming a technical expert? The Role: *Managing the Production legislation, Lean and Six Sigma *Implementing, Managing, and Improving production standards across the manufacturing line *Opportunity to further your career and technical develop The Person: *Previous engineering background within CNC *Looking for a full-time position *Looking for a role where you can manage, oversee and implement changes Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Harry Heal at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

Are you a natural leader with a passion for driving performance, safety, and quality? We're looking for Night Shift Team Managers to take charge of our Mixing department, ensuring operations run smoothly, efficiently, and effectively. This is a fantastic opportunity to make a real impact in a fast-paced manufacturing environment, where continuous improvement and people development are at the heart of everything we do. What you'll be doing: Leading, managing, and developing a team of Tech Ops and agency staff Ensuring compliance with Health, Safety & Environmental standards Maintaining food safety, integrity, and quality across all products Managing costs, materials, and waste to meet budget targets Motivating and training your team to deliver outstanding results Driving continuous improvement projects to boost performance and efficiency Upholding hygiene and GMP standards to ensure audit readiness every day What we're looking for: Proven ability to coach, lead, and inspire teams Strong communication skills and the ability to build respectful relationships Experience in manufacturing or food production environments Excellent planning, organisation, and problem-solving skills PC literacy (MS Office, SAP) Flexibility to meet the demands of a dynamic production environment What's in it for you: A chance to lead a key department in a thriving business Opportunities to develop your leadership skills and progress your career Be part of a supportive team culture that values recognition and engagement Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, pledge members for Neurodiversity in business, Disability committed members, Gold status pledge members for the Armed Forces Covenant, and Bronze trail blazers for Racial Equality matters. Gi Group of companies includes Gi Group Holdings Recruitment Ltd, Gi Recruitment Ltd, Draefern Ltd, Excel Resourcing (Recruitment Consultants) Ltd, Gi Recruitment Ltd, INTOO (UK) Ltd, Marks Sattin (UK) Ltd, TACK TMI UK Ltd, TACK International Ltd, Grafton Professional Staffing Ltd, Encore Personnel Services Ltd, Gi Group Staffing Solutions Ltd and Gi Group Ireland Ltd. Gi Group Staffing Solutions Ltd are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Are you a skilled Mechanical Maintenance Engineer looking for a role where your expertise truly makes a difference? Do you enjoy solving mechanical faults and keeping production equipment running smoothly? Are you confident working in a fast-paced manufacturing environment with a strong focus on reliability and safety? The Opportunity A leading engineering and manufacturing business is seeking a Mechanical Maintenance Engineer to support ongoing maintenance, repair, and optimisation of plant machinery. This is a permanent, full-time opportunity within a well-established organisation offering long-term stability and development. We would also welcome applications from these industries Food production, automotive manufacturing, chemical processing, plastics manufacturing, and heavy engineering. This role would suit candidates working in these roles Mechanical Fitter, Maintenance Technician, Service Engineer, Plant Fitter, Mechanical Engineer, Workshop Engineer, Multiskilled Engineer, Industrial Fitter, Machinery Technician, Reliability Engineer. Your duties and responsibilities will be Deliver both planned and reactive maintenance across a variety of mechanical equipment. Investigate faults, carry out effective repairs, and help reduce machinery downtime. Perform routine checks, servicing, and inspections to maintain safe and efficient plant operation. Support production teams by ensuring equipment is running reliably and assist with continuous improvement activities. Install, refurbish, or overhaul mechanical assemblies such as motors, pumps, gearboxes, conveyors, and associated components.You will have the following qualifications and experience Background in a manufacturing, industrial, or production setting with proven hands-on mechanical experience. Strong ability to diagnose mechanical issues and interpret technical drawings or schematics. Practical knowledge of hydraulics and pneumatics. A recognised mechanical engineering qualification (NVQ Level 3, HNC, or equivalent). Confident working safely within site procedures, including risk assessments, permits to work, and lock-out/tag-out processes.Get in touch now If you're seeking a new opportunity and think you have the skills and experience we are looking for, then apply now or contact Chris Hill Millbank Holdings Ltd is an equal opportunities employer committed to creating an inclusive and diverse workforce. We welcome applications from all suitably qualified individuals, regardless of background, and encourage candidates from underrepresented groups to apply. We are proud to be a member of the Disability Confident Scheme, and we are committed to ensuring an accessible and supportive recruitment process for everyone. If you require any adjustments at any stage, please let us know and we’ll do our best to accommodate. Millbank operates as both an Employment Agency and an Employment Business

An opportunity has arisen for a dynamic and self-driven Safety, Health & Environmental Advisor to join the MBDA team at our Bolton site. If you are passionate about safety, health and reducing our impact on the environment, this challenging but rewarding position may be for you. Salary: Circa £37,000 depending on experience Dynamic (hybrid) working: A minimum of 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: As a Safety, Health & Environmental (SHE) Advisor, you will combine strong administrative governance and management system control with a visible, "boots on the ground" operational presence across all functions, including logistics, production cells, and test facilities. You'll provide proactive, site-based Safety, Health and Environmental support within a manufacturing environment. The role will ensure compliance with UK legislation, stakeholder requirements, and internal management systems while actively influencing safe behaviours in an operational environment. Operational ("Boots on the Ground") Safety Support Maintain a visible presence across logistics, manufacturing areas, test facilities, laboratories and engineering. Support routine SHE inspections. Support Team Leaders in developing and reviewing task-based risk assessments and safe systems of work. Provide real-time advice during non-routine tasks, breakdowns, maintenance activities, and contractor works. Challenge unsafe behaviours in a constructive and professional manner. Support emergency exercises and drills. Monitor high-risk activities such as: Lifting operations (LOLER) Hazardous substances (COSHH/DSEAR) Confined spaces Hot works Explosive or energetics-related activities (where applicable) SHE Administration & Governance Maintain SHE documentation in line with ISO 45001 and ISO 14001 management systems. Administer incident reporting systems and ensure accurate record keeping. Track and monitor corrective and preventive actions to closure. Support preparation of monthly SHE reports and KPI dashboards. Manage document control for risk assessments, procedures, and policies. Coordinate audit schedules and maintain audit records. Support internal and external audit preparation, including evidence collation. Maintain statutory inspection records (e.g. lifting equipment registers, LEV Thorough Examination and Test records etc.) Incident Investigation & Reporting Lead or support investigations into accidents, near misses, and environmental incidents. Apply structured root cause analysis methodologies (e.g., 5 Whys). Produce clear, factual investigation reports for internal governance and external stakeholders. Support RIDDOR reporting submissions. Analyse incident trends and recommend preventative measures. Regulatory & Defence Compliance Ensure compliance with UK legislation including: • Health and Safety at Work etc. Act, • COSHH, • PUWER, • LOLER, • CDM, • Environmental Protection Act Assist with security-controlled document handling where required. Liaise with enforcing authorities (HSE, Environment Agency) when necessary. Environmental & Sustainability Support Monitor waste streams, hazardous waste controls, and spill prevention measures. Support environmental inspections and permit compliance. Maintain environmental registers and aspects/impacts documentation. Assist with sustainability reporting and improvement initiatives. Culture & Engagement Deliver toolbox talks, safety alerts, and briefings. Support induction training for new starters and contractors. Act as a point of contact for employee safety concerns. Promote near-miss reporting and positive intervention culture. Support behavioural safety initiatives and human factors integration What we're looking for from you: • NEBOSH General Certificate as a minimum (Ideally working towards or willing to work towards Level 6 Diploma in Occupational Health and Safety Practice) Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-ST1

Automation Engineer Bolton, UK Days £52,000 + Bonus Join a world-class automotive supplier at the forefront of advanced manufacturing, delivering innovative components and systems to major OEMs worldwide. We are seeking a talented and experienced Automation Engineer to drive the next phase of our production excellence in our Bolton facility. In this pivotal role, you will leverage your strong background in PLC programming, process automation, and production engineering to design, implement, and continuously enhance automated systems that boost efficiency, quality, and output in a high-volume manufacturing environment. Responsibilities - Automation Engineer Design and implement automated processes to optimise production efficiency and throughput Analyse existing production processes to identify and apply the most effective automation technologies Diagnose and resolve faults in automated production processes and equipment swiftly and effectively Manage project budgets, spare parts, and associated expenses Partner with Production Engineering and Maintenance teams to implement automated processes and ensure smooth, stable handover to production operations Drive continuous development and improvement of production systems, processes, and machine performance Lead and support process improvements through structured improvement plans Propose and implement efficiency enhancements for machines and production processes Monitor performance and task Production Engineers with targeted improvements on the production line Plan optimal process flows and operator work methods to maximise output without compromising quality Set clear targets for project activities and rigorously track benefits and outcomes Experience & Qualifications - Automation Engineer Advanced PLC Programming and Fault-Finding expertise (Allen Bradley, Siemens, Keyence, etc.) – ideally qualified to EAL / City & Guilds level or equivalent Proven track record in implementing and maintaining PLC systems and automated production processes in a manufacturing setting Solid knowledge of robotics, pneumatics, and mechanical systems commonly used in production environments Strong logical approach to problem solving and root cause corrective action (RCCA) Familiarity with formal problem-solving methodologies (e.g., SGA, DMAIC, 7-step, PDCA, 5 Why, Fishbone Diagram) Benefits - Automation Engineer Discretionary annual Bonus 7.5% up to 5.5% employer contribution EV Scheme: through salary sacrifice and free charging at site Medical Insurance Death in Service: 4 x annual salary For more information on this role, please contact Andy Haddon on (phone number removed), or send a copy of your CV to (url removed) For details of other opportunities available within your chosen field, please visit Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. Ideal background / Previous roles may include: Maintenance Engineer, PLC Engineer, Electrical Engineer, Shift Engineer, Shift Technician, Reliability Engineer or field service engineer Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors

World Class Defence Organisation is currently looking to recruit a Electronics Design Engineer / Test Design Support Engineer subcontractor on an initial 6 month contract. This role would suit a candidate who comes from an Electronics Design Engineer, Electronics Engineer, Production Support Engineer or Test Systems Designer background. Rate: £65.00 per hour Location: Bolton Hybrid / Remote working: 4-5 days a week onsite (possible for remote work occasionally). Compressed week of working Monday to Thursday is available. Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Interview Process: One stage Video Interview Test Design Support Engineer Job Description: The department have an excellent opportunity for experienced Electronic Design Engineers to play a leading role in the support of production activities at their state of the art manufacturing facilities. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers. You will act as the interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. Whilst the primary aim is focused on highly advanced module missile programmes and subsystems, there is also scope to work on other unique opportunities including support to launcher assemblies. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Skillset/experience required: To be suitable for this role, Individuals will be able to demonstrate a number of the following attributes: Degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Proven experience in the design of one or more of the following disciplines: Digital and Analogue electronics Power Electronics RF & Antenna Interconnects Safety Electronics Test Systems Schematic design PCB Design Adherence to BS EN Standards Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration. You’ll be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. Manage discreet work packages preparing bids, controlling costs and delivering solutions. Experience in supporting manufacturing and resolving manufacturing issues is an advantage, but not essential. Investigative skills to be able to find Root Causes of design related issues and propose robust Corrective Actions

World Class Defence Organisation is currently looking to recruit an Electrical Systems Engineer / Architect subcontractor on an initial 12 month contract. Your base site can either be from the companies Bristol, Stevenage or Bolton office. This role will be a hybrid position – 3 days per week onsite and 2 days remote. Hourly Rate: £60 - £85 (Umbrella). Contract Duration: 6 Months initially and then ongoing and long-term thereafter. Missile Electronic Architect Job Description: Electrical Architects/Engineers are involved in all aspects of missile development, from the early concept studies to series production and in-service support. It’s an excellent opportunity for someone wanting to build on their engineering experience. Responsibilities: You will be responsible for the electrical architecture and requirements for missiles and/or their associated launcher systems with duties including: Specifying/determining system electrical requirements interface definitions and characteristics between subsystems/equipment power architecture, including power budget and power profiles data communication and processing architecture requirements for EMC, bonding, grounding and screening signal safety, including routing of safety related signals Supporting test and fault-finding activities during compatibility checks, risk reduction, system proving/qualification and integration Reviewing and authoring reports, guidelines and processes Design assessments and analysis Working to defence/industry standards Attending and supporting design reviews Alternatively, acting as the Equipment Manager (RMO) for specific electrical/electronic equipment(s) that are part of a missile or launcher system you will: Project manage the equipment(s) on behalf of the project during development, qualification and manufacture Own the requirements on behalf of the project for the equipment(s) Produce Statement(s) of Work for the associated design authority for the equipment(s) Create and update plans showing activities for the equipment(s) Manage internal & external design authorities for delivery of the equipment(s) hardware, software and deliverables to schedule, cost, quality and performance Hold regular progress reviews with the design authority for the equipment(s) Review qualification verification evidence Track and find resolution to equipment non-compliances Attend and support design reviews Skillset/experience required: Technical experience required: electrical/electronics interface definitions knowledge of defence/industry standards, etc. degree level qualification in a related subject systems engineering writing reports Ideally this would be within a defence related background, however, experience within other engineering industries will also be considered. Experience within these other areas are also of interest but not essential: defence weapon systems power supplies actuators data communication sensors EMC Health Usage Monitoring Systems (HUMS) Model Based Engineering (MBE)

The Principal Maintenance Engineer provides technical leadership in maintaining and improving the reliability of process and ESS equipment. Salary: Circa £50,000.00 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: The role focuses on advanced fault finding, applying structured problem solving techniques such as FMEA and RCA to identify root causes of failures and implement long term solutions. Through the use of condition monitoring, data analysis, and continuous improvement methodologies, the role aims to minimise downtime, enhance equipment performance, and support efficient manufacturing operations. Lead Fault finding and diagnostic on complex process and ESS equipment, ensuring rapid identification and resolution of electrical, mechanical, and control system issues Apply structured reliability and root cause methodologies including, Failure Mode and Effects Analysis (FMEA) and Root Cause Analysis (RCA) to identify failure trends and implement long-term corrective actions Drive continuous improvement activities aimed at reducing equipment downtime, improving reliability, and increasing overall equipment effectiveness Implement and manage condition monitoring strategies to proactively assess equipment health, identify potential failures at an early stage, and support predictive maintenance activities Provide technical leadership and mentoring to maintenance engineers and operators, supporting skill development, and best practice fault finding techniques Work closely with production and engineering teams to support the introduction of new equipment, ensuring maintainability and reliability are considered at the procurement stage Develop and maintain maintenance procedures, risk assessments, and technical documentation Compliance with health & safety during all maintenance activitiesWhat we're looking for from you: Minimum HNC qualification in relevant field Proven experience setting up preventative maintenance strategies Knowledge of KPIs for maintenance applications (MTTR, MTBF and system availability) and ability to use data to analyse improvement actions Experience using investigation techniques & conducting route cause analysis SAP experience required - creating maintenance plans & workload schedulingOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

We have an exciting opportunity for an experienced Electronic Design Engineer to join our team and play a leading role in the support of production activities at our state of the art manufacturing facilities. Salary: Circa £42,000-£48 , 000 depending on experience Location: Bolton Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: You will act as part of the design team as one of the main interfaces to our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Working within design support is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of these products to deliver support to our customers. What we're looking for from you: You'll need to demonstrate a number of the following attributes: · Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. · Proven experience in the design of the following disciplines:- · Analogue and Digital Electronics · Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. · Someone who will be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. · Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. · Experience in a manufacturing environment and supporting and resolving manufacturing issues and a view to implement Design for Manufacture improvements into the design. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton An exciting role has become available in our Test Architect team as a Technical expert involved in all aspects of the Missile Test process. If you have experience Electronic circuit design, testing and failure analysis techniques along with Test equipment design then this could be just the role for you! Salary: Circa £72 ,000 depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 27% of base salary Car allowance: £300 per month Pension: maximum total (employer and employee) contribution of up to 14% Private Medical Insurance Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As the Missile Test and Testability Expert you will be reporting in to the Test and Testability Department Head and, from a Project perspective, into the Project Chief Design Engineer. As Test and Testability Architects (TTA), we are involved in all aspects of the Missile Test process - from the early feasibility studies to series production and in-service support. As a Subject Matter Expert for Missile Test and Testability Architecture you will participate in range of missile programmes using your experience and expertise to improve the definition of test equipment technical requirements by focussing on key areas and removing waste. You'll be managing definition of the project test strategy, Definition of Project BIT architecture including coverage requirements and improving the way we write our specifications across all projects. As a key member on the team you'll be assessing and recommending improvements to our ways of working across TTA and lead the analysis of production test data to spot trends and diagnose failures. There will also be a need for you to lead the analysis and modelling our system to understand the test coverage and generate diagnostic instructions. Day to day you could also be involved in - Participating and supporting Red-Team reviews and activities into critical issues during development and manufacture. Supporting new product bid activities. Identify, document and deploy best practice across the department and within projects. Mentor and actively support members of the Test & Testability department. Lead / participate in roadmap development activities.What we're looking for from you: Educated to degree level (or equivalent) with significant experience of electronic test at all stages of project lifecycle, including: Electronic circuit design, testing and failure analysis techniques. Test equipment design. Experience in requirements capture. Project management and planning. Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification. Experience in DfT and testability Proven ability to influence senior stakeholders within the business relating to technical direction Support departmental strategy and support the department head with recruitment of the right people into the team. Strong interpersonal and well developed communication skills (written & verbal).Willingness to travel when required (UK and EU). Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

MBDA is looking for a number of Software Engineers at varying levels to work in the Software Resource and Capability Team on Test Software. Salary:£40,000 - £75000 depending on experience Dynamic (hybrid) working:3 to 4 Days a week in the office Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity Test Equipment Software UK work to deliver the MBDA UK test capability in partnership with colleagues in Electronic Design, the Test Centre of Excellence and other areas of Software Engineering. Our mission as a function is to facilitate robust and timely test of missile systems and ensure MBDA continues to provide a decisive military capability for our home nations and their allies. Spanning a diverse portfolio of work packages, Test Software UK directly influences the company's product certification, manufacturing output and support activities. Specifically, Test Software UK are responsible for developing and supporting software packages that utilise Test Equipment hardware to configure, verify and validate the conformance and quality of our MBDA UK product range from development, through production and into field test scenarios. It is a multi-disciplined, dynamic, focused and agile team specialising in all aspects of test solution design, including software, hardware, simulation and real-time systems. It is great a place to learn about the company's entire product portfolio, whilst embracing the change to DevOps and other innovative technologies! What we're looking for from you: A software or electronics engineer with transferable talent into software development for test solutions: Strong ability to write software in languages such as C, C++ and C# (Some Python experience would be useful but not essential) motivated to develop and support reliable, high performance, standardised, and documented software. Excellent analytical and design ability, including review and critical analysis 'Can do' and flexible approach - you'll enjoy solving technical problems that sometimes extend beyond the bounds of "software" Keen to work on novel products where the software you produce is time and mission critical Able to communicate effectively with multiple stakeholders, including Systems Engineering, Electronics and Electrical, and Test and ValidationOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

An opportunity has become available at the MBDA UK Bolton site to work as part of a team of experienced engineers to support the increasing product delivery requirements, maintaining and improving processes and standards to achieve this. Salary: Circa £43,000 depending on experience Dynamic (hybrid) working: Minimum of 4 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As a Process Engineer, you will work as part of the Printed Circuit Card Assembly (PCBA) manufacturing business unit with a focus on the manufacture of our products. The Circuit Card Assembly (CCA) Business unit produces high complexity products with a high mix, low volume output. The business unit is rapidly growing in order to achieve the large backlog of orders over the next 5-10 years, with the production output more than tripling. You will be a part of the process engineering team working closely with test, manufacturing and quality engineers whilst building strong relationships with stakeholders including the operations, design support and calibration and maintenance teams. This role reports to the Principal Process Engineer within the CCA business unit. The Role: You will be responsible for various technical aspects of PCBA. This will involve working on creating and maintaining standards, identifying and carrying out continuous improvement activities, solving technical problems, all whilst considering quality as intrinsic to the role. The opportunity also allows you to grow your knowledge within manufacturing as part of development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future are some of the work packages that can provide stretch objectives for such growth. Key Responsibilities: Supporting the manufacturing area in its growth and rate increase. Carrying out improvement activities - data gathering and data analyses to understand impact and effort required. Support the Non-Conformance process - root cause analyses, implementation of effective corrective and preventative actions. Interface with the design authority during the product development phase to ensure optimised Design for Manufacture (DfM), and in the production phase for management of change implementation. This includes supporting the New Product Introduction team in creating/improving design rules for manufacturability of circuit cards. Ensure processes and equipment contribute to a safe working environment following both company processes and legal obligations, meeting internal quality requirements. Develop and maintain manufacturing methods, processes and equipment with a data-based approach, using methods such as SPC, to support a robust manufacturing system. Resolve issues and queries with the operations team on the shop floor. Perform and review PFMEAs. Develop tooling to aid the manufacturing process. Create and modify machine programmes for the assembly, manufacture or inspection of circuit cards.What we're looking for from you: An understanding and appreciation for quality control. Analytical mindset with the willingness to learn. Proficient in computer and internet use, including proficiency in commonly used applications such as Microsoft Office Suite & manufacturing systems such as: ERP systems, Manufacturing Execution System etc. Experience in Circuit Card Manufacturing or Design is beneficial. Knowledge of PCBA Processes and Technologies is beneficial. A proactive approach to process improvements. QUALIFICATIONS (Must Have) Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 Formal further education certificate to HND or equivalent in a relevant subjectALTERNATIVELY BEng/BSc in relevant Engineering/Technical DegreeOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Job Title: Senior Electronics Engineer Location: Bolton, Greater Manchester Type: Full-time, Permanent Salary: up to £65,000 base Ready to take your engineering career to new heights? We are hiring on behalf of an industry-leading electronics company that designs and manufactures innovative, tailor-made electronic solutions. Based in Bolton, this thriving business is seeking a Senior Electronics Engineer to join its dynamic team and contribute to high-impact, cutting-edge technologies. As a Senior Electronics Engineer, you'll be instrumental in developing advanced hardware systems. You'll work across multidisciplinary teams to bring products from concept through development and into production. This hands-on technical role combines engineering depth with leadership potential—perfect for someone who enjoys mentoring and driving collaboration. Key Responsibilities: Design hardware systems, schematics, and PCB layouts Lead product development projects within structured frameworks Translate project requirements into actionable objectives Collaborate with teams including Field Ops and Manufacturing Support prototyping and New Product Introduction (NPI) Maintain documentation and ensure ISO9001 process compliance Investigate and integrate emerging technologies with the Tech team What We Need From You: Minimum 5 years of experience in hardware design (ideally using Altium) Proven track record in testing and validating hardware components Skilled in digital and analogue circuit design, especially microcontrollers Understanding of comms protocols like LTE, Ethernet, CANBus, I2C Bonus: Familiarity with control systems, sensors, and LCDs Comfortable with full lifecycle development and project planning Programming experience for microcontrollers (preferred) Personal Traits: Strong analytical mindset with a solutions-driven approach Adaptable across multiple projects and evolving tech platforms Confident communicator who thrives in cross-functional teams Passionate mentor and natural team leader Detail-focused with enthusiasm for tech innovation This is an exciting opportunity to join a company where creativity fuels progress. This is a space for engineers who love challenging the norm and shaping future-forward products. With a collaborative, supportive culture, the team champions personal growth and big ideas—all while making an impact on the global tech scene. Please note we cannot offer sponsorship for the role. If interested, please send over an updated CV

Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. Role: Mechanical Engineer Location: Bolton, fully onsite Hours: 37 per week Hourly Rate: £32-£35 per hour via Umbrella, inside IR35 Clearance: SC required before starting What you'll be doing: The main aspects of the role will be as technical support for the metrology department supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work. You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Requirements: Minimum qualification: HNC in Mechanical Engineering. Experience and knowledge of calibrating torque tools to ISO 6789-2:2017 required. Good knowledge of Geometric Dimensioning & Tolerancing (GD&T) required. Experience and knowledge in dimensional calibration required Experience and knowledge of using and creating programs for coordinate measuring machine required. Good knowledge of temperature and pressure calibration desirable Able to deal with multiple issues, tasks and priorities concurrently.If you are interested in applying for this position and you meet the requirements, please apply immediately! Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

Production Operative Are you experienced in manufacturing or production environments and seeking a stable, rewarding role near Hindley Green, Wigan? We are currently recruiting a Production Operative for a busy manufacturing site. This is an excellent temp-to-perm opportunity that offers stable hours, overtime, and immediate start options to accommodate quick onboarding. If you are reliable, hardworking, and ready to join a dynamic team, we want to hear from you! Job Title: Production Operative Location: Hindley Green, Wigan Employment Type: Contract (Temp-to-Perm) Pay Rate: £17.09 per hour Shift Hours: 38 hours per week, with overtime available Candidate Responsibilities as a Production Operative Operating mixers and fillers on the paint plant Manual handling of products in a safe, efficient manner Supporting daily production activities to meet targets Maintaining cleanliness and safety standards within the work environment Assisting team members as required to ensure smooth operationsCandidate Requirements for the Production Operative Role Previous experience in a manufacturing or production environment Comfortable with manual handling duties Ability to work 38 hours per week, with flexibility for overtime Reliable, punctual, and available to start on short notice Able to work in a fast-paced, physically demanding environmentBenefits of Working as a Production Operative Competitive pay rate of £17.09 per hour Overtime opportunities to increase earnings Temp-to-perm for long-term job stability £250 Training Allowance Dedicated Specialist Consultant for ongoing support Work with a network of 1,000s of clients nationwide Daily payroll runs for prompt payment Free Candidate Registrations Referral and Loyalty Bonus Schemes Sign Up Bonus and Free Compliance ChecksHow to Apply Interested candidates should contact Lewis for more information. Please call (phone number removed) or send your CV to (url removed). Take the first step toward a fulfilling manufacturing career as a Production Operative today! This advert is optimized for job boards such as CV Library, Total Jobs, and Reed

We are seeking an experienced and highly motivated individual to join the Quality Assurance team in Bolton, providing support to both the Manufacturing and Supply Chain teams. Salary: Circa £60,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity? Are you a Quality professional with a passion for problem solving? Working with our Manufacturing & Supply Chain teams you will lead the Quality Assurance activities on one of our complex Weapon System production lines, thereby supporting delivery of UK strategic defence needs. Co-ordinate delivery of the Quality Assurance activities across the Manufacturing Business Units to reduce production programme quality risks. Timely resolution of production line issues, by leading multi-functional teams through application of industry standard problem solving tools and techniques. Lead delivery of assurance activities associated with industrialisation of our production lines. Identify and mitigate production risks through implementation of PFMEA's, Control Plans, Special Process validation, etc. Lead Project Manufacturing Non-Conformance Panels, escalating critical issues to senior management. Ensure implementation of any Project specific non-conformance processes within manufacturing. Conduct non-conformance data analysis to identify trends, root causes and opportunities for improvement. Primary interface to Customer for project contractual deliverables out of our Bolton production facility. Additional role responsibilities: Support the Project team in developing cost effective project planning to assist in on time delivery of all contractual deliverables, whilst meeting MBDA policy and process. Collaborate with the engineering and manufacturing teams to optimise the manufacturing processes. Support the delivery of Product Life Cycle Gate reviews, providing assurance of deliverables and ensuring timely closure of actions. Provide Quality reporting into Project, Manufacturing and Functional Programme Reviews. Drive the Quality culture within the Manufacturing domain to ensure continuous improvement and delivery of the quality strategy and risk assessments. Certify and release product to our customer in accordance with the contractual requirements. What we're looking for from you: Preferably degree educated, or substantial experience in Quality Management Practitioner of current QA problem solving methods (8D, Six Sigma, DMAIC, etc.) Good working knowledge of Microsoft Office packages (PowerPoint, Word and Excel) Excellent interpersonal skills are essential and able to influence others in a collaborative way. Highly self-motivated, and demonstrate a determination and persistence to deliver results despite obstacles and setbacks. Position is based at our Bolton site, but will require provision of support at our other MBDA sites. Some travel (both UK and international) maybe required. What's in it for you? The role provides an exciting opportunity to work in a high technology environment ranging from the manufacture of CCA assemblies through to live build of Weapon Systems. What's great about the team? Join a collaborative and supportive team who work together to contribute to a shared ambition to deliver for our Armed Forces and preserve the company's reputation as the leading provider of Missile and Weapon Systems. Achieve all this while maintaining your work/life balance!! Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CT1

Are you an experienced Electrical Maintenance Engineer looking for a role where your skills genuinely make a difference? Do you thrive in a hands-on environment, solving breakdowns and keeping production running smoothly? Ready to join a stable, long-established employer offering long-term career growth? The Opportunity A leading manufacturing company is seeking an Electrical Maintenance Engineer to support the reliability, safety, and performance of their production equipment. This is a full-time, permanent role offering stability, variety, and the chance to play a key part in improving machinery uptime and site efficiency. We would also welcome applications from these industries FMCG, chemicals, food and drink, packaging, and general industrial manufacturing. This role would suit candidates working in these roles Maintenance Engineer, Electrical Engineer, Multiskilled Engineer, Shift Engineer, Maintenance Technician, Electrical Technician, Service Engineer, Plant Engineer, Engineering Technician, or Industrial Electrician. Your duties and responsibilities will be Carrying out planned and reactive electrical maintenance across a range of production machinery and site equipment. Fault-finding on electrical systems to quickly identify issues and restore equipment performance. Completing routine inspections and maintaining accurate records of maintenance activities. Supporting improvements to reduce downtime and increase equipment reliability. Assisting with the installation, commissioning, and optimisation of new machinery and control systems.You will have the following qualifications and experience Background in electrical maintenance within a manufacturing or industrial environment. Strong diagnostic skills with experience working on motors, inverters, and control systems. Ability to interpret technical drawings, wiring diagrams, and electrical schematics. Experience of PLC-controlled equipment (advantageous but not essential). Flexible, proactive approach with strong teamwork and communication skills.Get in touch now If you're seeking a new opportunity and think you have the skills and experience we are looking for, then apply now or contact Chris Hill Millbank Holdings Ltd is an equal opportunities employer committed to creating an inclusive and diverse workforce. We welcome applications from all suitably qualified individuals, regardless of background, and encourage candidates from underrepresented groups to apply. We are proud to be a member of the Disability Confident Scheme, and we are committed to ensuring an accessible and supportive recruitment process for everyone. If you require any adjustments at any stage, please let us know and we’ll do our best to accommodate. Millbank operates as both an Employment Agency and an Employment Business

Murphy is recruiting for a [[title]] to work with Energy as part of our delivery of the Great Grid partnership (GGP) The project is currently in the process of mobilising the project teams in order to support the early works, inclusive of DCO support, ahead of site commencement Mid 2027. The works are currently split between our regional office in Stone Cross (Warrington), with GGP support in Birmingham and working with the Client based in Bury St Edmunds. Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. Overall responsibility for all engineering activities related to Extra High Voltage (EHV) cable systems (400kV, 275kV, 132kV AC) across design, procurement, installation, testing, commissioning and rectification works. Lead the technical delivery and assurance of HV cable projects, ensuring compliance with customer scope, specifications, processes and relevant IEC/British Standards. A day in the life of a Murphy Engineering Manager ( HV Cables) Review the design of EHV cable systems, with a focus on 400kV, 275kV, and 132kV AC and DC systems with the ability offer practical installation, testing and maintenance inputs Practical experience and appreciation of civil engineering aspects of HV cable installation including the management of temporary works and trenchless crossing design and installation techniques. Possess a robust understanding and application of cable system design principles, including thermal ratings Provide technical support to the Procurement function through scope production, review of designer specifications, BoMs and review of offers/proposals for the purchasing of HV cables and associated accessories, engaging with international suppliers. Lead supplier engagement for Type Testing, customer Type Registration requirements and Factory Acceptance Testing (FAT), ensuring all deliverables meet associated IEC, British Standards and customer specifications/scope. Ensure all engineering activities and deliverables are fully compliant with applicable standards and client specifications. Oversee and support HV cable installation, jointing, and termination (AIS/GIS) works, ensuring best practice and high standard of safety are considered at all times. Provide technical leadership for site teams, including the review and acceptance of supplier and subcontractor Risk Assessment Method Statements (RAMS), Inspection Test Plans (ITPs), checklists, and associated QA/QC documentation. Manage and coordinate HV testing and commissioning activities, including pressure testing, sheath testing and system energisation. Lead technical investigations into asset failures, conduct root cause analysis, and report findings. Develop and implement corrective and preventive actions to mitigate future risks through NCR and Lesson Leartn processes. Build and lead a high-performing HV Cable Engineering team, fostering a culture of technical excellence and continuous improvement. Mentor and develop junior engineers, supporting their professional growth Promote knowledge sharing and best practice across the team and wider business. Support RDEC claim for projects and area of expertise Represent the business in technical meetings, audits, and reviews with National Grid and other key clients. Champion best practice in health, safety, and environmental management, working closely with the SHES department. Ensure all engineering activities are conducted in accordance with company policies and legal requirements. Still interested does this sound like you? Degree in Electrical/Power Engineering or equivalent. Chartered Engineer status (or working towards) with IET or IMechE. Significant experience (typically 10+ years) in EHV/HV cable system design, installation, and commissioning. Demonstrable experience with technical procurement and supplier management for HV cable systems. In-depth knowledge of IEC, British Standards, and National Grid Technical Specifications. Proven track record in leading technical investigations and implementing corrective actions. Experience in developing and leading engineering teams. Ideally with xperience with CYMCAP or similar cable rating software and maybe experience in both onshore and offshore HV cable projects. Familiarity with digital engineering and GIS for cable projects would be a bonus

Production Operative – Bolton (BL6) Pay: £12.21 per hour (basic) Overtime: £18.32 per hour Hours: 7:00am – 3:30pm, Monday to Friday Pay increase after 12 weeks of service Overview We are recruiting Production Operatives for a well‑established manufacturing business in Bolton. This role involves operating machinery, supporting warehouse operations and ensuring high product quality through strict production processes. Key Responsibilities Production Operate production machinery and equipment. Follow product specifications, work cards and production plans. Maintain excellent product quality. Keep accurate production and material records. Warehouse Assist with loading and unloading raw materials and finished goods. Move pallets of stock and finished goods using pallet trucks. Quality & Technical Report any technical or production issues to the Team Leader. Carry out product testing accurately and consistently. Ensure products meet all required specifications. Health & Safety Maintain high housekeeping and hygiene standards. Identify and report hazards immediately. Follow all safe systems of work. Support health and safety initiatives, including inspections and risk assessments. Other Duties Participate in annual stock takes. Attend meetings where required. Support project work and represent the company during customer or supplier visits. Candidate Requirements Ability to work in a fast‑paced, target‑driven environment. Flexible and reliable attitude to work. Strong communication skills. Good attention to detail. Physically capable of meeting the demands of the role. Ability to read and write to an acceptable standard. Benefits Full‑time, ongoing work Monday to Friday. Enhanced pay rate after 12 weeks. Opportunity to grow within a reputable organisation. Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed) /> Many Thanks

Key Responsibilities Operating a heat press safely and accurately Assembling pre-roll metal components with screws and washers Using cutters to prepare items for packing Bagging and sealing finished products Ensuring quality standards are met Keeping work areas clean and organised Following all heal

Shift pattern 2 Days, 2 Nights 4 days off.Day: 06:00 to 18:00 & Night: 18:00 to 06:00.

We are recruiting for a Technical Event Production Engineer with current Tricaster Professional or Expert certification to deliver live event planning & production, remote production & filming services for a medical science clients internal communication. Technical Event Production Engineer.

This role involves collaboration with cross-functional teams to deliver quality solutions efficiently while supporting production operations. A leading aerospace company in the UK is seeking an Engineering Support professional to provide guidance on the AAR build line and manage engineering changes.

A leading digital consultancy in Greater London is seeking a Senior Oracle EPM Functional Support Consultant to manage complex Oracle EPM environments. This role involves providing end-to-end support, diagnosing issues, and contributing to enhancements, all within a hybrid working model.

A leading financial services company is looking for a skilled leader in technology operations to manage application support teams.

We’re seeking a Production Support Engineer, ideally with experience in the financial services industry, to join our dynamic team in supporting mission‑critical software systems. Provide front‑line production support across various cryptocurrency business lines and functions, including client

A leading biotechnology company in the United Kingdom is seeking a proactive and detail-oriented Production Engineer to bridge manufacturing operations and field service.

A leading fintech company in the United Kingdom is seeking a Production Support Engineer to join their European team. This role involves managing customer inquiries, troubleshooting integrations, and providing high-quality technical support. The ideal candidate will have over 4 years of experience i

The role includes providing IT support, maintaining production system data, and conducting training sessions.

The production support engineering team is at the forefront of supporting operations in making delivery to customers. You are a people person and able to integrate into the production support engineering team and to maintain the positive relationship currently help with all customers. Liaising with

Responsibilities include ensuring system reliability, responding to support requests, and working with various teams to maintain a high-performance trading environment.

A leading machinery manufacturer in the East Midlands is seeking a Multi-skilled Maintenance Engineer to ensure machinery operates smoothly and meets production demands.

Trading Production Support Engineer. My client are seeking an Engineer with a broad skillset to support a range of technology within their stack. The position has a heavy focus on the support of Front Office Trading Applications, and the ideal candidate will stem from a similar environment.