Production support jobs in GloucesterCrear alertas

As an experienced Traffic Management Operative, you will be required to work on Traffic Management Schemes for a range of projects, helping them to run smoothly and efficiently to achieve maximum production in a working day, whilst maintaining a high Health and Safety standard. This role requires flexibility due to the nature of the business. You must be able to work both days and nights, including some weekends as required. You must have a can do and responsible attitude to work. We are looking for someone to: • Oversee all methods of traffic management; Give and take, Priority, Stop/Go boards, Portable traffic signals, Convoy working, Road closures, Lane closures and diversions, • Ensure all work is carried out according to safe working methods and best practice procedures, • Carry out risk assessments and method statements on works involving traffic management, • Ensure that all activities associated with the job are carried out according to laid down procedures where possible. Identify areas that can be improved and report to your line manager, • Ensure that daily vehicle checks are carried out – to ensure cleanliness and tidiness of vehicle and the safety of the driver and passenger, • Promote positive company image whilst at work (via wearing of company clothing, attitude, and site cleanliness), • Demonstrate initiative by constantly looking to see where improvements can be made, • Assist the public, directing them through safe site lines when required, • Only undertake Traffic Management activities that you have the qualification to undertake (LANTRA), • All Traffic Management setups must be compliant with guidance and legislation (Red Book, Chapter 8, ARTSM etc.), • Regularly check your site to ensure it remains compliant, • Report any unsafe acts and conditions, and rectify immediately if safe and competent to do so, • Drive safely and avoid distractions. Keep within the speed limit and drive with due care and attention to prevent road traffic collisions, • Park vehicles safely, taking consideration of members of the public and other road users, • Five-point PPE to be worn on site at all times, • Lantra 12d accreditation as a minimum TTMBC, 12d (M1-M2), • Lantra 12 a/b accreditation, IPV driver, foreman advantageous, • Provide evidence that you understand the differences between Chapter 8 and the Safety at Street Works and Road Works (red book) and how these apply, • Full valid UK driving licence, • Be able to read and understand CAD drawings, in relation to the works required, • Preferable to have mechanical ability in relation to Traffic Lights We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy which you can find here - . Go Traffic Management has been serving traffic management solutions to clients since 2008, and are now one of the UK’s largest traffic management providers. Our services are delivered from our 22 regional depots, through our dedicated team of 200 employees and support network of approved suppliers. At Go Traffic Management, we have a reputation for providing clients with extensive, well-planned, and expertly delivered solutions for projects and schemes of all sizes. We pride ourselves in meeting (and often exceeding) clients’ expectations in a professional and cost-effective manner, which is a strategy that has resulted in our long-standing working relationships with clients, partners, and stakeholders. Be: SAFE - Go Traffic Management Our Be: SAFE campaign actively encourages our workforce to work safely and avoid unsafe acts and conditions by following four basic rules.

Thermal Processing Lead/ Chipping Campden, Gloucestershire Campden BRI, our Processing Innovation Team supports our members and clients with consultancy, project work and training activities in the thermal processing area, including process development, validation and optimisation. This encompasses heating (e.g. cooking, pasteurisation and sterilisation) and cooling (chilling and freezing) processes. Due to the work they do there's an exciting travel element to this role- UK, Europe and Globally! Expenses paid work trips across the globe, recent trips include- Turkey, Iceland, Jamacia, South Africa, Italy and Spain. You will be working in a range of different food & drink manufacturing sectors, growing your skills and knowledge! The work of the Group is firmly rooted in the application of sound science and engineering principles to the solution of food industry problems. The route to delivering this is through a blend of longer-term research activities and short-term contract support for companies. In addition, there is a significant training and knowledge transfer activity aimed at facilitating the application of best practice within the food manufacturing sector. The Group has facilities for traditional thermal processing (including heating and cooling operations), as well as a selection of more innovative technologies, supporting areas such as product development and food packaging. You will provide thermal process authority support to Campden BRI clients in the form of technical project work, validation solutions and the delivery of training to clients. You will play a leading role in the development of new business within the team. You will lead a team of process technologists (3-4 direct reports), in the delivery of scientific and technical projects, particularly focused on delivery of the thermal process validation services. Position • Management & oversight of the thermal validation service, ensuring quality of work, planning of resource and maintenance of equipment (e.g. repairs & calibration), • Managing own project work activities to meet project deadlines. These will be the more technical validation and/or consultancy projects, some of which will involve travel to client sites in the UK and abroad, • Design and provision of training courses and presentations on external/internal training courses, seminars and symposia, • Proposing and delivering funded research, around thermal and none-thermal processing technologies, • Development of the technical and professional skills of staff reports (3-4 G2/3 level staff), • Responsible for the business development of research and contract work building client relationships, preparing/reviewing quotes, • Responding to direct technical enquiries and requests for processing advice Requirements • Degree or equivalent in chemical engineering, science or food technology., • A fundamental awareness of the importance of heat processing in the food industry., • Proven experience working in a food production related setting. Experience of working within a specific processing areas such UHT, pasteurisation, or retort processing is advantageous., • Experience of and/or enthusiasm for, people management and development., • Proven business development skills, with the potential and desire to develop these further., • Excellent verbal and written communication skills (client meetings, emails, reports)., • Time management and financial awareness to facilitate effective project management, • Full UK/EU driving licence and eligibility to live/work in the UK. Ability to travel within the UK and beyond, • Computer literate: MS Office (particularly Excel, Outlook, PowerPoint). Benefits • Reward platform with employee discounts and rewards, • 25 days holiday + 8 bank holidays, • Buy and sell holiday scheme, • A generous work save pension scheme, with employee contributions matched by the company up to 10%, • Culture focus around work/life balance (early finish Fridays), • Subsidised onsite restaurant, • £45,000- £55,000 pa based on experience Please note due to our rural location you must have your own transport (car) and have a valid UK drivers license. Click 'apply now' or send your CV to .

Role: Project Support Engineer (Manufacturing) Location: Gloucester Duration: 12 months Inside IR35: Umbrella About our client: Our client is a world-leading manufacturer of integrated composite propeller systems, known for innovation in both commercial and military aviation markets. They provide advanced propulsion solutions that combine high performance, efficiency, and reliability. Their expertise includes the design, development, manufacture, and support of electronically controlled, all-composite propeller blades, which have become a benchmark in the aerospace industry Key Responsibilities: - • Reports to the Engineering Project Manager, • Manage all deliveries associated to the project (engineering and hardware), • Maintain a schedule detailing all activities and deliverables for the project and delivery to internal and external customers., • Reporting project deliverables status during regular meetings., • Managing integrated project team, including resource planning and task definition., • Generating weekly status reports / metrics with focus on deliverables. The Person: - • Demonstrated success in a project team environment, preferably aerospace., • Knowledge of the specification and design process, development and qualification process and manufacture / production planning process., • Knowledge of risk reduction and continuous improvement techniques., • Excellent communication and interpersonal skills., • Strategic vision, a questioning approach & determination to achieve objectives. Please apply if you want to be part of a leading global aerospace company that delivers complex, mission-critical solutions!

An exciting opportunity has arisen to join a market-leading group operating across the Commercial, Industrial, Residential and Service sectors, who are now looking for an Electrical Design Engineer to support the delivery of innovative engineering solutions across their expanding product portfolio. This Gloucestershire based, dynamic organisation has become the market leader in each of the sectors it serves and is embarking on an ambitious growth plan over the next 3 years. With continued investment in products, infrastructure and most importantly, its people, this is a fantastic opportunity to join a forward-thinking engineering function that prides itself on being entrepreneurial, customer-focused, competitive and operationally best-in-class. As an Electrical Design Engineer here, you will take responsibility for electrical design activities across the product lifecycle, from early-stage concepts all the way through to production release. This will include control panel design, PLC integration and ensuring that all electrical systems meet stringent safety, quality and compliance requirements. This is a crucial role in delivering robust and manufacturable engineering solutions working as part of a multi-disciplinary team. Key responsibilities for the role of Electrical Design Engineer based in Gloucestershire: • Leading the electrical design of packaged pumping systems, including control panel layouts, schematic diagrams and cable schedules., • Researching and developing new product concepts while enhancing existing designs in response to customer, production and market feedback., • Specifying and selecting electrical components to meet performance, safety and compliance requirements., • Development and integration of PLC-based control systems including configuration, I/O definition and functional documentation (PLC programming experience would be useful but is not essential)., • Producing and maintaining detailed electrical documentation including wiring diagrams, design calculations and BOMs., • Ensuring that all electrical designs comply with CE/UKCA requirements, Health & Safety regulations and relevant UK/EU directives (LVD, EMC, Machinery Directive)., • Supporting EMC compliance through best-practice design and collaboration with external test facilities., • Collaborating with Mechanical Design, Compliance and Manufacturing teams to ensure design integrity and manufacturability., • Providing input into design reviews, risk assessments and verification/validation testing throughout the development lifecycle. Key skills required for Gloucestershire based role of Electrical Design Engineer: • Degree or equivalent in Electrical or Electronic Engineering., • Proven experience in product design or development, (specific experience involving water management / fluid-handling equipment would be ideal but is not a pre-requisite)., • Experience of working within R&D or New Product Development environments., • Proven experience of designing industrial/commercial control panels (a working knowledge of PLC-based control systems and Variable Speed Drives would be an advantage but is not a pre-requisite), • Solid experience in using CAD/schematic design software, experience of SolidWorks Electrical would be ideal but experience of EPLAN, or AutoCAD Electrical will also be considered., • Familiarity with key standards and directives, including:, • Low Voltage Directive (LVD), • EMC Directive, • Machinery Directive, • BS EN 60204-1 (Electrical Equipment of Machines), • EN 60335 Working environment and opportunities: • Hybrid working arrangements with time split between the Gloucestershire based office, home and site, • Opportunity to join a highly skilled, ambitious engineering team within a rapidly expanding market leader, • Involvement in the full product lifecycle, contributing to innovative and technically challenging projects., • A culture that encourages development, continuous improvement and professional growth. This is a great opportunity to join a forward-thinking engineering group with ambitious growth plans, a collaborative culture and a commitment to building the best place to work while helping shape the future of high-performance, compliant engineering solutions. To apply please send your CV to , or for more information contact Chuck Lam on 01582 878868.

Multi-Skilled Maintenance Engineer.Days & Nights (6am-6pm / 6pm-6am).We're recruiting a hands-on Multi-Skilled Maintenance Engineer for a busy FMCG manufacturing site in Buckinghamshire.You'll support production through breakdown response, planned maintenance and ongoing equipment improvements.R

You will provide support and coaching to the on-site team to ensure minimum downtime for the production team with both mechanical and electrical issues The main responsibilities of the role includes - Support Engineering Manager over different shifts - Deliver plant and reactive maintenance of ele

Embedded Systems Engineer Permanent | Hybrid £60,000 - £70,000 per annum + Benefits About the Role We are seeking an experienced Embedded Systems Engineer to take ownership of our embedded control platforms. This hands-on role spans the full embedded stack, including STM32 firmware, hardware integration, TouchGFX GUI development, and system-level architecture. You’ll work closely with electrical and mechanical engineers to deliver robust products from development through to production. Key Responsibilities • Own and develop firmware on STM32F4 MCUs (Embedded C), • Design and support PCBs using Altium Designer, • Develop low-level drivers (ADC, SPI, UART/RS485, I2C, GPIO, RTC), • Implement safety logic and state machines, • Develop and maintain TouchGFX user interfaces, • Manage system architecture, EEPROM storage, and Modbus/RS485 communication, • Support testing, validation, production, and field issue resolution Required Skills & Experience • Experience in embedded development (STM32 preferred), • Strong Embedded C and low-level driver experience, • Experience with TouchGFX and mixed-signal systems, • PCB design experience with Altium, • Familiarity with Modbus RTU, RS485, EEPROM, and production debugging tools Desirable • Experience in industrial automation, HVAC, water systems, or similar environments

Quality Assurance Manager Gloucester/Cheltenham Manufacturing Permanent Role £50,000 - £55,000 The Role – Quality Assurance Managerr An excellent opportunity has arisen for a confident Quality Assurance Manager to join an established SME manufacturing business ideally situated between Gloucester and Cheltenham. You’ll be tasked with leading quality matters within the business including QMS and Quality Assurance matters, whilst also guiding ongoing Environmental, Health and Safety Matters. This is a unique opportunity working closely with management across the business to lead the continued growth and success of a modern manufacturing business. Duties – Quality Assurance Manager • Develop and implement a site-wide quality strategy aligned with business and customer objectives., • Partner with Production, Engineering & Supply Chain teams to integrate quality, • Maintain and continuously improve the QMS in line with ISO standards, • Plan and lead internal audits, co-ordinate external and customer audits, • Monitor and analyse process capability and product conformance through key metrics, • Lead root cause investigations using structured problem-solving tools (8D, 5 Whys)., • Manage supplier quality performance through audits, scorecards, and improvement plans., • Oversee customer returns and complaint processes (CRNs), • Maintain and improve EHS management systems., • Coordinate risk assessments, safe systems of work and training., • Lead on quality matters for Production, Engineering, Supply Chain and Service., • Coach teams in standard work and structured problem solving (8D, 5-Whys) and verify CAPA effectiveness., • Design and deliver concise, practical training (inspection methods, control plans, etc.), • Promote Lean and Six Sigma methodologies to enhance product quality., • Coordinate Quality, Environmental and H&S data gathering to support Group reporting Background – Quality Assurance Managerr • Preferably - Degree in Engineering, Manufacturing, Quality, or a related field., • Notable experience in quality/HSE roles within manufacturing, • Evidence of ownership of QMS processes., • Proven leadership experience managing multi-disciplinary teams., • ISO 9001 (and familiarity with ISO 14001/45001). Knowledge, • Lean, Six Sigma, and structured problem-solving experience, • SAP Business One (or equivalent ERP) coverage, • QMS/DMS such as Q-Pulse (or equivalent QMS), • Office & Analytics experience. Omega – Quality & HSE Manager For more information regarding this role please call Lee Powell on 01453 829530 or to make an application apply online directly or email Thank you for your interest in this vacancy. Omega Resource Group is a technical and engineering specialist agency and we also recruit for Quality Manager, HSE Manager, Quality Lead, Senior Quality Engineer, HSE Officer, QHSE Manager, QEHS Manager, QA Manager, Quality Management Systems Manager and more.

Your role as Process Engineer for our client will involve you undertaking the following type of tasks: - perform Root-Cause analysis with process and test data to implement sustainable corrective actions - respond to manufacturing problems in a timely manner to support production - ensure site co

Director of Business Development - Development Services, Northern Europe Driving growth across Northern Europe Remote role however, requirements to live within the United Kingdom or Sweden. WHO? Are you a business development professional with deep experience in pharmaceutical development services? This exciting opportunity is offered by Meribel Pharma Solutions, a growing CDMO supporting pharmaceutical and biotech partners. They provide integrated development and manufacturing solutions, from early development through commercial supply. Dedicated to bringing life-changing medications to market, they can support the high-quality production of oral dosage forms, liquid formulations, lyophilisation, and semi-solid dosage forms. WHAT? Responsible for driving commercial growth across Northern Europe. Key aspects of the role include: • Identify and Develop Opportunities with Prospects and Targets, • Client Relationship Management, • Achieve Sales Targets, • Collaborate with Internal Teams, • Reporting and CRM Management, • Market Intelligence YOU! The ideal candidate will live within the UK or Sweden and have a minimum of 5 years’ experience in business development or sales within a CDMO or pharmaceutical manufacturing environment, with particular strength in development services, formulation development, and analytical services. Educated to bachelor’s degree level in life sciences, business, or related field. A comprehensive understanding of the pharmaceutical development lifecycle, strong knowledge of oral solid dose and small-molecule drug development, and the credibility to engage with scientific and regulatory stakeholders. Experience in sterile manufacturing, including aseptic processing or lyophilization, is highly desirable. Please apply directly above or reach out to OR to find out more! Don’t meet all the requirements? Don’t sweat! We’re always looking for an excuse to discuss your next opportunity. You might just surprise yourself… Lead Candidate wholeheartedly supports Equality and Diversity in employment and opposes all forms of unlawful or unfair discrimination on the grounds of age, disability, sex, gender reassignment, sexual orientation, pregnancy and maternity, race, religion or belief and marriage and civil partnerships.

Manufacturing Test Engineer Salary: £45,000 DOE Working Pattern: Hybrid, typically 4–5 days on-site in Bolton Security: British citizen or dual UK national; BPSS checks required We’re looking for a skilled Manufacturing Test Engineer on behalf of our client; who are a leader in the defence sector, to support the testing, diagnosis and validation of electronic and electro-mechanical assemblies across their lifecycle. You’ll help develop test processes, introduce new test equipment, and ensure products meet time, cost and quality targets. You’ll join a collaborative team working on a range of development and production projects. Key Responsibilities • Support test activities from early design through to production readiness, • Introduce and maintain test facilities, including documentation and configuration control, • Perform testing and component-level fault diagnosis, • Collaborate with Operations and Design teams to resolve technical issues, • Contribute to continuous improvement and maintain test engineering standards What You’ll Need • HNC or higher in an engineering/electronics discipline (HND or degree preferred), • Experience with analogue/digital electronic testing and manufacture, • Knowledge of electronic measurement, diagnostics and test equipment, • Experience with manual and automated test systems, • Familiarity with ERP/MES tools (e.g., SAP), • Strong problem-solving, organisation and communication skills Benefits • Bonus up to £2,500, • Pension contributions up to 14%, • Paid overtime, • Up to 15 days flexi leave, • Enhanced family leave, • Subsidised meals, free parking, • Strong training and progression opportunities

Code Wizards Group is a world leader in backend and multiplayer infrastructure for the gaming industry. From high-scale AAA console and PC games to fast-paced mobile indie titles, we empower studios to bring multiplayer experiences to life. Within the Group lie Multiplayer Wizards, whose sole responsibility is to help game studios to run and operate their game infrastructure seamlessly for the players. We're on the search for some Contract DevOps Engineering talent to join the team working on some specific game migration work. Are you a highly productive DevOps Engineer, looking to use your wealth of games industry knowledge and your technical DevOps skills to help keep games online and running, whatever challenges are thrown at you? In this role, you will use your skills to help educate others in the team and act as an escalation point for head-scratching problems. Incidents are no problem, and you are happy to pick up and run with an outage, working with internal teams and the customer to keep the game infrastructure online. DUTIES AND RESPONSIBILITIES • Diagnosing and performing root cause analysis on customer infrastructure, including in incident scenarios, • Proactively identify and raise methods of improving team efficiency and procedures to improve support to the customer, • Assisting with escalated issues and navigating scenarios across multiple teams, • Writing clean, scalable, and performant scripts & code, • Forming part of a regular on-call rotation supporting our customers and internal teams SKILLS AND EXPERIENCE • Experience working in the gaming industry having migrated a live service game in production., • Knowledge of backend systems for online games and ideally exposure to game engines, Unity, Unreal etc., • An excitement to expand your knowledge on unfamiliar infrastructure and tools, • Automation knowledge on a wide variety of tools – Ansible, Terraform, Grafana, and Kubernetes, etc., • Prior experience migrating a game from one Cloud provider onto AWS, • Excellent knowledge of containers, virtual machines and Linux server administration, • Demonstrable experience in programming or personal code-based projects. Please note, initially, we will be looking at people with knowledge of the Games Industry.

First Point Group is recruiting for a Core Network Engineer (Ericsson/Nokia) with specific previous experience working on Virgin Media / VMO2 and/or BT/EE networks and projects. The successful candidate will have extensive experience within operational support, optimisation, and evolution of a next-generation IMS and 5G core network. This is a fully remote role based on a daily rate contract. Please note - sponsorship cannot be provided, so candidates must live in the UK with valid rights to work. Responsibilities • Perform daily configuration, operation, and maintenance (O&M) of IMS Core network nodes to ensure continuous service availability., • Monitor network KPIs and proactively provide performance improvement recommendations across internal and external IMS Core platforms., • Collaborate with cross-functional teams using automation and analytics tools to improve operational efficiency., • Execute parameter configuration changes on the 5G Standalone Core platform, including cloud-native core environments and subscriber data platforms., • Manage performance monitoring and alerting for 5G SA Core networks using modern observability tools (metrics, logging, and alert management)., • Conduct service validation, acceptance testing, and end-to-end functional testing for IMS and 5G SA services., • Audit core network nodes and services to ensure maximum availability, resilience, and compliance with operational standards., • Lead capacity planning activities for Core network elements, ensuring scalability and alignment with traffic growth and service demand., • Handle end-to-end KPI and KQI analysis across Core and interdependent network domains., • Diagnose and resolve complex IMS Core network issues related to configuration, software, hardware, products, and services., • Support the integration, commissioning, and acceptance of new Core network nodes and services, including project and vendor coordination., • Provide L2/L3 operational support and escalation handling for Core network incidents, including roaming-related issues., • Perform pre- and post-implementation analysis of IMS Core KPIs following network changes and optimisation activities., • Manage product and software lifecycle activities across all Core network nodes, including upgrades, patches, and decommissioning. Key Skills & Experience • Strong hands-on experience with IMS Core and 5G Core network environments, • Proven expertise in Core network operations, performance management, and troubleshooting, • Experience working with cloud-native Core architectures and automation-driven operations, • Solid understanding of KPIs, KQIs, and end-to-end service assurance, • Ability to manage complex incidents and collaborate across engineering, operations, and vendor teams, • Experience supporting live production networks in a high-availability environment

Position: Mechanical Design Engineer Location: Gloucestershire Salary: up to £50K plus benefits package Industry: Aviation & Aerospace PRS Engineering has engaged with a new client and a world leading manufacturer of specialist ground support equipment (GSE) and specialised systems supporting Aviation & Aerospace Operations. This exciting business design, develop, and manufacture market-leading aircraft vehicles and systems. Delivering projects and equipment to the highest quality, performance, and reliability. Noticed by some of the world’s largest airports, oil companies and military organisations. A new opportunity has arisen for a Mechanical Design Engineer to join a specialist and growing engineering division to assist with the production of new designs and modify and update existing designs by producing accurate technical drawings This is an amazing opportunity to join a company with a global reputation who provide services to the aircraft industry. The successful candidate will undertake design work on contracts based on analysis of specifications, producing accurate drawings and liaising with production, purchasing and sales where necessary. Knowledge in a wide range of areas including 3D design, electronics and PLC programming. The role will suit candidates from a design background, with a degree in mechanical, electrical, or electronic engineering (or equivalent). You will need experience using 3D AutoCAD (Inventor) or SolidWorks and any additional knowledge of electronics or PLCs would be advantageous, however PLC programming training can be provided. The successful candidate will be predominately involved in the mechanical design of vehicles however the role will also involve electrical design the candidate will be responsible for using AutoCAD to produce technical drawings and schematics, for both new designs and new processes. You will be involved in testing the equipment and QA. This is a truly unique opportunity for an engineer, to join a market leading company that will provide opportunities for skills development, that can be utilised across all aspects of engineering. The role involves: • Design and detailing of Aircraft vehicles and associated equipment, • Creation of engineering proposals, • Generation of tender documents from customer specifications, • Selection of components, compilation of BOMs and costings, • Communication of preliminary designs to both Sales & Design, • Preparation of 3D CAD data & 2D manufacturing drawings using Inventor & AutoCAD, • Project management of contracts from concept through to delivery, • Supervision of shop floor personnel Must be eligible to work in the UK, no sponsorship available now or in the future. Must have full rights to work in the UK with no restrictions.

Multi-Agent LLM Systems Remote (MUST BE IN EUROPE) We’re partnering with a venture-backed startup led by a founder who has built and taken two technology companies to IPO, now assembling a world-class team to tackle one of the most impactful problems in applied AI. The company is developing a voice-enabled AI copilot used by professionals to eliminate the friction from documentation and decision-making, a product with genuine, real-world impact that’s already being used in production environments. They’re now looking for a Senior/Staff AI Engineer to own and evolve the core “brain” service behind this assistant, the system that powers reasoning, retrieval, and dialogue in real time. Interview Process: 1️⃣ Intro call where we talk about the role. 2️⃣ Technical discussion with the Head of AI. 3️⃣ Deep-dive session with a Backend Engineer and ML Engineer from the team. 4️⃣ 30-minute conversation with the Founder. Why This Is Worth Your Time • Real ownership: You’ll be the architect behind a core AI system, not a feature contributor., • Fast-moving environment, • Immediate impact: Your code will run in production and support real users from day one., • Technical depth: Multi-agent reasoning, voice-streaming, RAG optimisation and all in one system., • Flexible setup: Remote across the EU, with optional co-working in London or Barcelona. What you’ll do • Obsessive about latency, you think in milliseconds, optimise for concurrency, and understand the trade-offs between speed, cost, and model performance., • Design, implement, and productionise multi-agent LLM systems that reason, plan, and coordinate., • Develop FastAPI-based microservices optimised for low latency and high reliability., • Engineer and evaluate RAG pipelines: hybrid retrieval, re-ranking, grounding, and context validation., • Integrate real-time voice interfaces (STT/TTS, WebRTC, LiveKit) into intelligent conversational flows., • Instrument and evaluate system performance using observability and model-faithfulness metrics. What we’re looking for • Proven ability to build and ship agentic or multi-agent frameworks into production., • Expert Python, FastAPI, and asyncio developer., • Practical experience with LangChain, Autogen, or custom orchestration layers., • Startup mindset: ownership, speed, and pragmatism over perfection. Bonus points • Experience working with voice or streaming systems (STT/TTS, WebRTC, LiveKit)., • Exposure to evaluation tooling, LLM-as-judge setups, or agent benchmarking., • Background in healthtech, fintech, or other compliance-heavy sectors.

Summary We’re looking for a practical, technically-minded Product Development Technologist to help us take new nutraceutical products from development into reliable and efficient commercial production. This is a hands-on role that sits between R&D and Manufacturing where you’ll be supporting the industrialisation and scale-up of solid dose products (powders, capsules and tablets) ensuring they run consistently at volume, meet quality expectations and can be manufactured efficiently on our equipment at high volumes. At TOHC, we manufacture our products in-house, so this critical role is about making products work in the real world. You’ll spend time in the lab, on the factory floor and alongside the teams responsible for producing and releasing products every day. Who are we? The Oxford Health Company is an award-winning contract manufacturing business specialising in the food supplement market. Since our incorporation in 2013, we’ve been recognised as one of the Times Top 100 Fastest-Growing Companies in 2023, with an impressive 58% average annual growth over the past three years. Our commitment to excellence has earned us numerous industry-specific accolades, including recent 2024 wins at the Oxfordshire Business Awards in both the Large Business and Green Award categories. We are a dynamic, entrepreneurial team driven by a mission to become the UK’s leading Food Supplement Manufacturer, both in turnover and service quality. Our success is built on offering expert service and the industry's shortest lead times to new and medium-sized brands with high-value propositions. Our headquarters and manufacturing facility are located in Bicester, with a second storage warehouse nearby. Since fitting out our state-of-the-art clean rooms and manufacturing facility in 2019, we have continued to invest in our infrastructure to better serve our customers and enhance operational efficiency. What will you do? Industrialisation & scale-up. • Support the transfer of new products from R&D into routine manufacturing with a focus on powders, tablets and capsules., • Help define the “best way to make it” at scale including blending approach, order of addition, mixing times, compression parameters, encapsulation settings and packaging considerations., • Investigate common solid-dose challenges such as flow issues, bridging, rat-holing, segregation, weight variation, poor compressibility, tablet defects and capsule fill inconsistency., • Recommend practical improvements to formulations and/or processing parameters to improve yield, consistency, and throughput., • Carry out and interpret relevant testing on blends, raw materials and finished products to support manufacturability and consistency., • Typical checks may include bulk/tapped density, compressibility, moisture/LOD, particle size considerations, blend uniformity checks, tablet hardness/friability/disintegration and capsule fill weight behaviour., • Use data and observation to inform decision-making and ensure learning is captured properly., • Produce clear, useful documentation that supports scale-up and production readiness (formulation sheets, trial write-ups, manufacturing instructions, technical handovers)., • Work closely with Production, Quality, Procurement and Commercial teams to keep development moving and remove blockers., • Support feasibility conversations for new product enquiries by assessing whether something is realistic with available equipment, ingredients and timelines. What We’re Looking For Education: Bachelor’s degree in Pharmacy, Pharmaceutical Sciences, Food Science, Chemistry, Chemical Engineering (or equivalent industry experience). Experience: Proven experience in either pharmaceutical or nutraceutical/food supplement product development, scale-up, technical transfer or manufacturing support within solid dosage forms (tablets, capsules, powders). Technical Skills: • Confident operating and interpreting results from common lab equipment (e.g., hardness testers, disintegration/dissolution equipment, moisture/LOD testing, tap density testing)., • Strong analytical and problem-solving skills with a hands-on approach to troubleshooting., • Ability to interpret manufacturing instructions, product specifications, quality requirements and translate these into practical action on the manufacturing facility floor., • Clear technical writing skills, with experience producing useful documentation such as trial reports, manufacturing instructions, and SOPs. Why Join Us?

We are seeking an experienced and.Shift Team Leaderto support day-to-day engineering operations at our Tewkesbury site.In this hands-on leadership role, you will guide and support a team of Engineers, ensuring the smooth running of production and distribution activities across a fast-paced environme

Lead, support, and energize a warehouse team to achieve daily production targets. Ensure materials are prepared, processed, and dispatched according to customer specifications.

Role: Account Director Location: Remote (UK based) If you’ve ever thought “this would blow up on TikTok” - we want you on our team. We’re on the hunt for an Account Director who can blend data, creativity, and a touch of TikTok magic to help brands connect with millions. If this sounds like you, then join the UK’s Leading TikTok Agency. We are Nonsensical. We’re a team built on passion, driven by creativity, always led by curiosity, and grounded in honesty. We help brands show up, stand out, and blow up on TikTok. From viral restaurants like Urban Tandoor, to leading B2B brands, global banks, and huge beauty brands. We’re a full-service TikTok agency. That means one day you could be leading organic strategy for a brand, launching a TikTok influencer campaign, or driving growth for global brands on TikTok Shop. What you’ll be doing: • Lead overall TikTok strategy for key clients - focusing on organic growth, storytelling, communities and recurring formats., • Be the senior strategic partner for your clients - leading client relationships, running strategic sessions, performance reviews and ensuring TikTok ladders back to wider brand goals., • Set the direction for influencer and creator activity for your clients — deciding when and how creators should be involved, approving suggested creators and overseeing campaign approach, • Shape TikTok Shop strategy where relevant - using organic content, creators and live formats to drive growth, • Oversee content output from your client team - making sure briefs are sharp, creators stay on-brand and the final content is something you’re proud to put live., • Identify new opportunities for client growth - reactive cultural moments, influencer partnerships, long-term series or new TikTok features worth testing., • Lead and develop your team - supporting Account Managers and Execs, setting standards, providing feedback and helping them grow into strategic thinkers., • Support new business and pitches - helping shape proposals, leading parts of pitches and showing prospective clients how we grow brands on TikTok. Skills, experience and characteristics • Good understanding of TikTok and wider social media platforms - content formats, communities, trends, algorithms and how brands grow organically., • You’ll have agency experience, with a track record of managing successful accounts, • You’ve been the senior contact for clients - leading calls, setting direction and building trusted relationships., • Confident challenging ideas, making strategic recommendations and keeping clients focused on long-term growth, not just single posts., • Has managed or led a team - setting expectations, mentoring and helping others grow., • Exceptionally organised - comfortable managing multiple clients, deadlines and creative production workflows., • Calm under pressure, proactive with solutions, and adaptable when TikTok (or clients) change direction quickly. Hours: 36.5 per week Monday - Thursday 9am - 5.30pm Friday - 9am - 4.30pm What you get if you join us: 🏡 Fully Remote Working – Work from wherever you’re happiest in the UK (with access to a co-working space in major UK cities if you like a change of scene). 💰 Pension Scheme – Helping you invest in your future while you shape your present. 🎉 Company Socials – From virtual hangouts to IRL meetups, we love bringing the team together. 💡 Creative Half-Days – Every quarter, take a half-day plus £50 to do something that inspires you — a class, gallery trip, pottery, spa, whatever frees your mind. 📚 Learning Fund – £200 a year towards books, audiobooks, courses or content that fuels your development. 🎊 Bonus Leave Days – Birthday? Wedding? Moving house? Take the day off on us (no annual leave used). 📝 What to expect in the recruitment process We like to be transparent - here’s how it works: Step 1: Apply Show us who you are - apply via LinkedIn but if you also want to submit a cover letter, portfolio, a TikTok via go for it! Step 2: Screening Call A 20–30 minute chat with our People & Talent team to get to know you and answer any initial questions. Step 3: First Interview A conversation with your potential manager — diving into your experience, how you think about TikTok and client relationships. Step 4: Second Interview + Task You’ll complete a small strategic or creative task (nothing wild) and present it back to our your potential manager and the Chief Content Officer — a chance to show how you think, lead and create. 💬 Ready to join the team? Ready to join the team? Apply today - we can’t wait to meet the person behind the creativity. At Nonsensical, we believe great ideas don’t come from one place, one perspective, or one type of person - they come from everywhere. That’s why we welcome applications from people of all backgrounds, experiences and identities. If you’re excited about this role but don’t meet every single requirement, please still apply. We care about potential as much as experience - and we’d love to hear your story.

Overview At Element Digital Engineering, we don’t just solve problems, we engineer smart, practical solutions that shape industries. As part of the global Element Materials Technology group, we combine advanced simulation and consultancy with world-class testing, inspection, and certification expertise. From nuclear and aerospace to energy and defence, our work spans sectors and scales. One day it’s simple hand calculations and static FEA; the next, it’s high-fidelity 3D dynamic or shock analyses. Whatever the challenge, we bring the right level of detail to deliver outcomes that matter. Join our team as an Engineer / Project Engineer (Structural Analysis) and become a trusted partner to our clients, providing: • Design support & in-service assessments, • Verification services & failure investigations Full-time, Permanent | Based in Bristol (Quayside) or Derby | Hybrid & Flexible Working Available Element Digital Engineering is a leading provider of specialist engineering simulation, design, and consultancy support to clients across many industries – including Aerospace, Automotive, Energy, Built Environment and Chemical Process – in the UK and internationally. As a part of our team, you will play a central role in providing our clients with design support and verification services, operational troubleshooting, and technical safety assessments. Responsibilities • Carry-out a range of technical projects and analyses, with some supervision from our more experienced staff, in order to meet the clients’ needs and expectations, • Participate in technical delivery and client relationship management, • Support business development activities with a range of new and existing clients, • Integrate and engage with our positive team culture with adherence to Element’s core values – care, integrity, and progress Skills / Qualifications • Have a bachelor’s degree (grade 2.1 or above), master’s degree or PhD or in a relevant engineering, science or applied mathematics discipline. Preferably with experience in the application of structural analysis from first principles or in accordance with relevant standards, • Have experience delivering engineering analysis in an engineering company and/or engineering consultancy setting, including managing projects or aspects of engineering projects, • Have strong technical knowledge and experience in solving problems with FEA, including defining an approach, model setup, post processing, verification and validation. This should include statics, dynamics, and frequency domain. This would ideally be in at least two of aerospace, nuclear, renewable energy, oil & gas, or defence sectors, • Have a working understanding of structural integrity topic areas such as fatigue, creep and plasticity; as well as material behaviour, • Ideally have knowledge of widely used analysis tool, including ANSYS, Abaqus, NASTRAN, or Calculix with a demonstrable ability to extend their capability using user functions where necessary, • Some proficiency in the in the use of programming languages such as Python, MATLAB, VBA , C# or C/C++ would be an advantage, • Have strong verbal and written communication skills, • Are either already at, or actively working toward, Chartered Engineer (or equivalent) status, • Like a challenge, are flexible thinkers and aren’t intimidated by unfamiliar problems, • Enjoy client and colleague interaction, takes responsibility for delivery, and wants the opportunity to work within a growing and dynamic engineering team Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today’. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming “the world’s most trusted testing partner”. All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c) “If you need an accommodation filling out an application, or applying to a job, please email ”

Data Scientist – Peer‑to‑Peer Renewable Energy Trading Platform Location: London (Hybrid) Employment Type: Full‑time, Permanent About the Company We are a rapidly scaling peer‑to‑peer Power Purchase Agreement (PPA) platform enabling businesses, generators, and communities to buy and sell renewable electricity directly. Our purpose is to accelerate the shift to a decentralised, transparent, and data‑driven energy system. We build intelligent systems that optimise matching, pricing, and forecasting across distributed generation and consumption. As we expand across the UK and Europe, we are adding strong analytical and modelling capability to our team. Role Overview We are hiring a Data Scientist to develop the forecasting, optimisation, and analytical models that underpin our trading platform. You will design, build, and deploy production‑grade models using energy‑market data, asset telemetry, weather data, settlement data, and commercial datasets. This role is central to the evolution of our pricing, risk, trading, and optimisation engines. You will collaborate closely with engineering, product, and commercial teams and work with a high degree of autonomy. Responsibilities Modelling and Forecasting • Develop time‑series models for generation, consumption, and market price forecasting., • Build probabilistic and scenario‑based forecasting capabilities., • Apply machine learning to optimise matching, pairing, and routing algorithms within the P2P marketplace. Trading and Optimisation Intelligence • Create algorithms that optimise buyer–seller matching, pricing, and load balancing., • Support automated PPA structuring, risk scoring, and exposure modelling., • Develop data‑driven insights to improve trading efficiency and platform performance. Data Infrastructure and Engineering • Work with engineers to design and maintain pipelines for market data, weather feeds, asset data, and settlement information., • Implement scalable analytics environments and deploy models into production. Product and Cross‑Functional Collaboration • Translate modelling outputs into dashboards, APIs, scoring engines, and product features., • Provide input into product strategy based on model performance and market trends., • Communicate insights clearly to non‑technical stakeholders. Market and Commercial Analytics • Analyse energy market signals, PPA structures, pricing models, and regulatory factors., • Develop intelligence around imbalance exposure, generation patterns, demand profiles, and commercial optimisation. Required Skills and Experience Technical Skills • Proficiency in Python and associated data science libraries (NumPy, Pandas, SciPy, scikit‑learn, PyTorch/TensorFlow)., • Strong experience with time‑series modelling (ARIMA, Prophet, LSTMs or similar)., • Understanding of optimisation methods (linear, mixed‑integer, reinforcement learning desirable)., • Strong SQL and practical experience with production‑ready data pipelines., • Experience working with cloud environments (AWS, GCP, or Azure). Energy and Market Experience (Highly Desirable) • Understanding of electricity markets, PPAs, forecasting, imbalance settlement, or asset telemetry., • Experience with data sources such as system operator data, market pricing feeds, or weather‑driven asset forecasting. Professional Skills • Ability to work in a fast‑paced startup environment with autonomy and ambiguity., • Strong communication and problem‑solving skills., • Ability to convert complex analytical outputs into actionable business recommendations. Nice to Have • Experience with marketplace or matching algorithms., • Exposure to flexibility markets, virtual power plants, or reconciliation/settlement processes., • Experience with ML deployment frameworks (MLflow, Vertex AI, SageMaker)., • Knowledge of optimisation libraries such as Gurobi, OR‑Tools, or Pyomo.

An exciting opportunity has arisen with a specialist engineering organisation delivering high-performance solutions across a wide range of industries. We are seeking a Design Engineer - Mechatronics to join a growing engineering team and play a pivotal role in the full product development lifecycle – from initial concept and prototype development through to production, testing and release to market. As a Design Engineer - Mechatronics, you will work closely with existing engineering and production teams, contributing to the design and manufacture of custom sensing products tailored for extreme environments. This is a hands-on, full-time, on-site role offering variety, autonomy and the chance to make a direct impact on product performance and business success. Key responsibilities for the role of Design Engineer – Mechatronics based in Gloucestershire include: • Research, develop and design new products from concept through to production., • Produce component designs, tooling and manufacturing drawings., • Modify, improve and up-issue existing part drawings to support ongoing product development., • Work across quality, production and business management systems to ensure product integrity and efficiency., • Ensure compliance with relevant regulations and standards., • Inspect and test delivered components as part of the quality and verification process. Key skills and experience required for the role of Design Engineer – Mechatronics, based in Gloucestershire: • Degree in Mechanical Engineering, Mechatronics or a related discipline., • Provable industry experience in an engineering design environment., • Proven experience delivering products through the full lifecycle – from concept and prototype development to testing and market release., • Hands-on experience with prototype building, testing and validation., • Strong proficiency in CAD tools (ideally SolidWorks) for 3D modelling and 2D manufacturing drawings., • Computer literate and comfortable using Microsoft Office/365, Teams and ERP systems., • Strong communication skills with excellent written and verbal literacy., • Highly self-motivated, able to manage multiple simultaneous projects with minimal supervision., • Strong attention to detail, quality-focused and committed to “right first time” delivery., • Ability to take initiative and solve design challenges in a fast-paced environment., • Coding knowledge for supporting management systems or test rig development is beneficial but not essential. The successful candidate will, once settled, work largely independently and report to the Commercial and Production Directors, with regular project reviews to ensure progress and quality. APPLY NOW! To apply for the role of Design Engineer – Mechatronics based in Gloucestershire, please send your CV to , or for more information contact Mike Belmar on 01582 878807 or 07961 158782.

Role: Machine Learning Engineer (Robotics) About AssetCool AssetCool is addressing one of the most pressing challenges in the global energy transition - grid congestion. By combining cutting-edge grid robotics with breakthrough materials science, our technology transforms the physical performance of the grid in situ, increasing current-carrying capacity by up to 30%, at just 5% of the cost and in a tenth of the time compared to conventional approaches. In addition to enhancing capacity, our solutions tackle other grid constraints including corrosion, electrical noise, and enable the collection of high-value data to build accurate, predictive digital twins. This technology is proving transformative and is being adopted at an accelerating pace, with deployments across Canada, Slovenia, the UK, and the USA, and a strong global deployment pipeline. AssetCool is one of the fastest growing start-ups in Europe, with plans to more than double, again, in size over the next six months. Backed by international investors from the US, Europe, and the UK, we are proud to be one of the most innovation-focused companies in the UK energy sector. We’re looking for ambitious, mission-driven individuals who are excited to work hard alongside their colleagues to build and deploy world-leading technology that tackles some of the planet’s most urgent infrastructure challenges. Role Overview We are looking for a Robotics Machine Learning Engineer to join our software team and help deliver ambitious ML solutions that power real-world robotic inspection and automation. This is a hands-on, applied role where you’ll build multi-modal machine learning models that operate in challenging outdoor environments, helping take ideas from prototype to field-tested deployment. You’ll be involved in the full ML lifecycle: building datasets, training and evaluating modern vision models, running experiments, and supporting deployment to edge devices. Demonstrable experience is essential - this could be through a previous role, research, open-source contributions, or strong personal/university-level projects. Candidates at all levels are encouraged to apply. Key Responsibilities • Develop and improve machine learning pipelines for robotic inspection tasks, including: segmentation; detection; classification; object tracking., • Build, train, and evaluate deep learning models using modern architectures such as:, • YOLO model family architectures for object detection and image segmentation., • Transformer-based object detection models (e.g., DETR / RT-DETR style approaches)., • Segmentation models such as Segment Anything Model (SAM), • Multimodal Vision Language Models (e.g. PaliGemma, Qwen2.5-VL, SmolVLM)., • Work with real-world industrial datasets (variable lighting, clutter, motion blur, weather effects) and help define clear annotation and labelling standards., • Support annotation workflows and dataset management using platforms such as Roboflow., • Prototype solutions quickly, moving from idea → training → evaluation using clear metrics (IoU, mAP, precision/recall, F1, etc.)., • Train ML systems using both real and synthetic datasets, including:, • generating synthetic training data for rare events and edge cases., • applying domain randomisation techniques to generalise training outcomes., • evaluating sim-to-real transfer performance., • Perform statistical and numerical analysis to evaluate model performance, failure modes, and robustness in field conditions., • Collaborate with robotics, embedded, and software teams to ensure ML systems are testable, deployable, and reliable on real hardware., • Communicate results clearly through short technical write-ups, sprint demos, and experiment logs. Required Skills & Experience • Strong Python programming skills, including experience with ML training and data workflows., • Experience with Jupyter Notebooks., • Demonstrable hands-on experience developing and training vision models., • Architectural fluency and a deep understanding of state-of-the-art architectures, including transformers and CNNs with the ability to select and adapt models based on specific constraints and applications., • Experience with deep learning frameworks such as PyTorch (preferred) or TensorFlow., • Understanding of key ML/CV concepts:, • dataset splits, overfitting, evaluation metrics, augmentation, and performance trade-offs., • Comfortable working with image processing and common computer vision libraries (e.g., OpenCV, NumPy, Pillow, SciPy, Matplotlib)., • Good engineering habits: Git-based workflows, virtual environment usage, clean code, and reproducible experiments., • Strong problem-solving ability, able to iterate quickly and learn new tools and techniques. Preferred Skills & Experience • Experience with Roboflow for dataset management, augmentation, annotation workflows, and/or model training., • Comfortable using Jupyter Notebooks for rapid experimentation, dataset exploration, and model evaluation., • Experience with “cutting-edge” vision model ecosystems and customisation (e.g. prompt-driven workflows, foundation segmentation models, hyperparameter tuning, adapters)., • Experience with synthetic data generation and simulators for perception training and testing., • Familiarity with robotics simulation tooling such as NVIDIA Isaac Sim, MuJoCo, Gazebo (or similar simulation environments)., • Familiarity with deployment constraints and optimisation for edge inference (e.g. NVIDIA DeepStream, or similar tooling), • Experience with Docker or container-based development for reproducible training and deployment environments., • Understanding of practical ML engineering workflows: experiment tracking, model/version management, dataset provenance, and regression testing, • Basic C/C++ knowledge (helpful for integrating models into production robotic systems)., • Keen interest in robotics, real-time perception, and the latest machine learning and computer vision research, with an emphasis on practical deployment outside the lab. Why Join AssetCool? • Work on groundbreaking technology revolutionizing the power grid., • Fast-growing startup with significant industry traction and large-scale projects., • Collaborative, innovation-driven team with exciting career growth opportunities., • Competitive salary, and flexible work options Research shows that some candidates may hesitate to apply unless they meet every listed requirement. If this role excites you but your experience doesn’t align perfectly with every qualification, we still encourage you to apply. You might be exactly who we're looking for, either for this role or another opportunity within our team. We’re proud to be an equal opportunities employer and welcome applications from people of all backgrounds. We’re committed to building an inclusive, supportive workplace where everyone can thrive, regardless of age, disability, gender identity, marital or civil partnership status, pregnancy or maternity, race, religion or belief, sex, or sexual orientation. If you have a disability or any specific requirements and need adjustments at any stage of the recruitment process, just let us know and we’ll do our best to accommodate your needs. We may close this vacancy early if we receive a high volume of applications. We encourage you to apply as soon as possible to avoid missing out.

Job Description My client, a food production company based in the Tewkesbury area is looking to recruit a Maintenance Engineer Team Leader on a permanent contract.You will provide support and coaching to the on-site team to ensure minimum downtime for the production team with both mechanical and el

We are seeking a Development Manager to lead a forward thinking team, exploring innovative and proven practices and technologies which enable Hutchinsons to deliver exceptional agronomic advice. Ranging across agronomic inputs, technology, crop production techniques, genetics and broader agronomy concepts, the Development team support our Advisors to provide industry leading advice to their customers. About the Role As Development Manager, you will lead on projects that underpin our technical strategies, ensuring our Advisors have the confidence and evidence they need in their roles. You’ll work closely with internal and external stakeholders to ensure that we continue to innovate, robustly trial new products and technologies and communicate findings effectively. Key Responsibilities • Lead and Manage: Inspire and guide the Development team to deliver high-quality trials and outputs on time and to the highest standards. Oversee the team in the planning, monitoring, and reporting of trials on agronomic inputs, crop protection, nutrition, biostimulants, and technology innovations., • Building and Managing Relationships: Build strong relationships with internal stakeholders to ensure the team priorities and business objectives are aligned. Maintain and develop partnerships with external stakeholders to ensure Hutchinsons remain at the forefront of access to new chemistry, technology and other innovations., • Collaboration: Work with technical, commercial, and services teams, as well as external partners; input suppliers, supply chain, technology opportunities and breeders., • Innovation Projects: Drive engagement with Regional Trials Centres, Helix farms, and Novafield initiatives to evaluate new technologies and opportunities., • Financial Management: Report to the Board on costs and ensure that budgets are utilised effectively. What We’re Looking For • Strong technical understanding of UK agronomy with a desire to be at the forefront of market innovations with the confidence to support and challenge current agronomic practices., • Proven leadership and team management experience., • Excellent communication and relationship-building skills., • Ability to manage multiple projects and collaborate across diverse teams.

DHX is the hydraulic engineering arm of Kinetic Solutions Group, delivering high-performance fluid power systems across critical sectors including Renewable Energy, Defence, Infrastructure, and Stadia. Known for robust manufacturing, advanced technical capabilities, and precision engineering, DHX supports high-integrity, mission-critical applications worldwide. As demand for our engineered hydraulic systems continues to grow, DHX is recruiting a Hydraulic Fitter to join our skilled team based at our Heckmondwike facility in West Yorkshire. This is an exciting opportunity to work on high-profile projects across the UK and globally, with hands-on involvement in the build, installation, and maintenance of advanced hydraulic equipment. Purpose of the Role The Hydraulic Fitter will be responsible for the in-house assembly, testing, and commissioning of hydraulic systems, along with on-site installation and servicing. This includes power units, hydraulic cylinders, manifolds, and associated mechanical assemblies. The role involves both workshop and field-based work, supporting delivery and aftercare of bespoke engineered solutions. Key Responsibilities In-House Assembly & Testing • Assemble and test hydraulic systems including HPUs, cylinders, manifolds, and associated pipework and fittings., • Conduct quality checks to ensure systems meet technical and safety specifications., • Assist with factory acceptance testing (FAT) and prepare systems for dispatch and installation. On-Site Installation & Commissioning • Install mechanical and hydraulic systems at customer sites, ensuring alignment with technical drawings and procedures., • Fit components such as motors, gearboxes, and bearings in accordance with design specifications., • Carry out hydraulic flushing, pressure testing, and commissioning under supervision or independently, depending on project scope. Service & Maintenance • Support ongoing equipment servicing, fault finding, and root cause analysis of hydraulic and mechanical systems., • Perform reactive and planned maintenance both in-house and at client facilities., • Prepare detailed reports following service visits, outlining issues found, actions taken, and recommendations. Collaboration & Documentation • Work closely with engineering, production, and project teams to ensure alignment on specifications and schedules., • Accurately record build, test, and service activities for traceability and compliance purposes., • Support continuous improvement activities related to service delivery and hydraulic build quality. Client Interaction & Travel • Represent DHX professionally during site visits and service interventions., • Travel to customer sites across the UK and occasionally overseas as required for installation or commissioning activities. Skills & Experience Required • Mechanical apprenticeship or Level 3 qualification in Mechanical Engineering or equivalent., • Experience working with hydraulic systems, including build, maintenance, or commissioning., • Good understanding of hydraulic principles and mechanical assembly techniques., • Strong fault-finding and problem-solving capabilities across hydraulic and mechanical equipment., • Proficient in interpreting mechanical and hydraulic schematics and general arrangement drawings., • Familiarity with safe working practices and health & safety regulations., • Ability to work independently or as part of a team in both workshop and field environments., • Effective communicator with a proactive, collaborative attitude. Location: Heckmondwike Travel: Required to customer sites across the UK and occasionally overseas. Job Benefits • Competitive Salary: A competitive salary aligned with your skills, experience, and the value you bring to the business., • Professional Development: Ongoing training, development, and support for professional qualifications, including opportunities for career progression., • Annual Leave: Enjoy 25 days of holiday per year, plus 8 statutory bank holidays., • Holiday Purchase Scheme: Buy up to 5 additional days of holiday each year to suit your personal needs., • Pension Scheme: Employer pension contributions to help secure your financial future., • BUPA Health Scheme: Access private healthcare through our comprehensive BUPA Health Scheme., • Paycare Cash Plan (Level 2): Get money back on everyday healthcare costs with our Level 2 Paycare Cash Plan.

Machine Learning Engineer - Contract (Financial Services, Outside IR35) Duration: 6 months Rate: £650 - £750 per day IR35: Outside Location: UK / Remote We’re seeking an experienced Machine Learning Engineer to support a Financial Services organisation on an initial 6-month contract, working on production-grade ML systems that operate in regulated, high-volume environments. This role is ideal for someone comfortable taking models from research through to deployment, with a strong appreciation for robust engineering, governance, and scalability. Responsibilities • Design, build, and deploy machine learning models into production within a Financial Services environment, • Collaborate closely with Data Scientists, Software Engineers, Risk, and Product teams, • Build and maintain end-to-end ML pipelines (training, validation, inference, monitoring), • Ensure models meet requirements around performance, resilience, and explainability, • Contribute to MLOps best practices, model governance, and technical standards, • Support model monitoring, drift detection, and ongoing optimisation Required Experience • Proven commercial experience as a Machine Learning Engineer, ideally within Financial Services, FinTech, or a regulated environment, • Strong Python skills and hands-on experience with ML libraries (TensorFlow, PyTorch, scikit-learn), • Experience deploying and supporting ML models in production, • Solid understanding of data pipelines, versioning, testing, and software engineering best practices, • Experience working with cloud platforms (AWS, GCP, or Azure) Nice to Have • Experience with fraud, risk, credit, AML, pricing, or customer analytics use cases, • Familiarity with MLOps tools (MLflow, Kubeflow, Airflow, etc.), • Docker and Kubernetes experience, • Exposure to model governance, explainability, or regulatory frameworks Contract Details • £650–£750 per day (Outside IR35), • Initial 6-month contract, with strong extension potential, • Immediate or short-notice start preferred

Position: Senior / Principal Electrical Engineer Location: Birmingham, UK Employment Type: Full-time, Permanent Role Summary We are seeking an experienced Senior / Principal Electrical Engineer to lead the electrical discipline within an ambitious and growing MEP design consultancy. You’ll play a pivotal role in shaping electrical engineering solutions for a variety of built-environment projects, ensuring designs are sustainable, robust, compliant with regulations, and aligned with clients’ technical and performance requirements. You’ll work closely with multidisciplinary teams delivering from early-stage concept through detailed design, construction monitoring and handover, with emphasis on low-carbon and high-performance outcomes. Key Responsibilities • Lead electrical design on medium- to large-scale building services projects from concept through to RIBA Stages 4-6, ensuring technical excellence and design coordination., • Produce and review HV/LV distribution designs, power systems, lighting and controls, emergency & external lighting, fire alarm & life safety systems, and communications infrastructure., • Prepare engineering calculations, specifications, layouts, schedules and performance criteria that meet regulatory, safety, sustainability and client standards., • Oversee production of design documentation (schematics, detailed drawings, BIM models), ensuring accuracy and constructability., • Provide technical leadership, mentoring and coaching to junior engineers and design staff., • Coordinate electrical scope with mechanical, public health and architectural disciplines to achieve integrated solutions., • Advise clients and project teams on electrical compliance, energy efficiency, low-carbon strategies and sustainable design alternatives., • Act as a point of contact for clients, contractors and stakeholders throughout project delivery., • Review contractor submissions, respond to technical queries, and support site inspections and commissioning activities as required. Qualifications & Experience • Chartered or near-chartered Engineer (CEng / IEng) with relevant professional body (e.g., IET, CIBSE)., • Significant post-qualification experience (ideally 10+ years) in electrical building services consultancy or similar MEP design environment., • Strong technical capability in electrical engineering design, with proven experience leading diverse projects., • Proficiency in BIM tools (Revit or equivalent) and electrical design software., • Demonstrable experience with building regulations, compliance standards and energy modelling principles., • Excellent communication skills, with ability to engage confidently with clients and multidisciplinary teams. Desirable Skills • Experience in sustainable, low-carbon design and energy-efficient electrical systems., • Exposure to performance-based design and advanced power/controls systems., • Prior involvement in RIBA Stages 0-7 workflows and construction monitoring. Why This Role Matters You will be instrumental in growing the electrical design capability within an engineering consultancy that champions innovative, low-carbon building services. This is an opportunity to shape electrical strategy, influence design outcomes and mentor the next generation of engineers while working across exciting and varied projects.

Job description Are you an experienced New Product Introduction (NPI) Manufacturing Engineer? Are you proficient in ensuring NPI manufacturing processes meet project deliverables ? I want to talk to you!I am looking for an experienced NPI Manufacturing Engineer to join a global leader in Automotive manufacturing Manufacturing Engineer Outside IR35 Contract Monday to Thursday 8:00am – 5:00pm Friday 8:00am – 2:00pm Scotland Manufacturing Engineer Job Description • Manage allocated projects through a structured, gated process from the concept/quotation stage, right to production-handover + 90 days, • To support the Technical and NPI team in all aspects of the Engineering function regarding new product / design change introduction including cost tracking, • To assist manufacturing through optimising processes and work layouts etc. to ensure capacity is available, existing plant use is maximised, and material movement is minimised using simulations., • Actively implement, manage, and analyse continuous improvement activities using lean principles and tools such as PFMEA, Process Flow, Value Stream Mapping and standard operations, • Find ways to reduce costs and maximize quality. Manufacturing Engineer Essential Experience/Skills/Qualifications • Ideally degree qualified, although other qualifications and relevant experience, particularly with an Automotive Tier 1 are also acceptable, • At least 2 years relevant experience within a Manufacturing engineering environment, • Experience of Lean, Kaizen and structured problem-solving tools

ABOUT US Established in 2010, XTOOLTECH is a Shenzhen-based supplier of automotive intelligent diagnostic tools. Adhering to the principle of “Make Repairing Easier”, we are committed to the R&D, production, and sales of automotive intelligent diagnostic equipment. Leveraging cutting-edge technologies such as car networking, big data, and cloud computing in the field of automotive electronic diagnosis, we strive to deliver innovative solutions to the global market. Our business covers over 75 countries and regions. Our core products (e.g., XTOOL D1 Pro diagnostic scanner) integrate IoT and cloud technology, making us a pioneer in simplifying vehicle repairs worldwide. OUR MISSION: Make Repairing Easier OUR VISION: To be the world's leading provider of automotive electronic diagnostic equipment At XTOOLTECH, we value innovation, collaboration, and a customer-centric mindset. We provide a dynamic work environment that encourages growth, rewards excellence, and supports employees in achieving their professional goals. Join us to contribute to the automotive diagnostic industry and grow with a forward-thinking team. ABOUT THE JOB We are seeking an experienced Overseas Channel Sales & Marketing Manager to lead our overseas market expansion and channel management. This role will be pivotal in driving our global sales strategy, building strong overseas partnerships, and ensuring the achievement of sales targets. You will have the opportunity to shape our overseas market presence and work with a diverse team across different regions. JOB RESPONSIBILITIES • According to the company's marketing strategy and overall planning, conduct comprehensive channel planning for overseas markets, establish and improve channel sales systems., • Undertake sales targets in overseas regions, formulate actionable sales plans, and lead the completion of product promotion and sales tasks., • Develop overseas customer development and maintenance plans, organize their implementation, supervise progress, and evaluate results to ensure plan realization., • Conduct in-depth analysis and investigation of customer markets, identify market trends and opportunities, and coordinate with relevant teams to formulate and adjust customer marketing and sales strategies., • Coordinate the planning and implementation of overseas exhibitions and other marketing events to enhance brand awareness and promote product sales., • Coordinate the management of overseas marketing centers and overseas branches, ensure smooth communication and collaboration, and optimize operational efficiency., • Responsible for other related matters arranged by the company. JOB REQUIREMENTS • Bachelor's degree or above; fluent in English (listening, speaking, reading, and writing) as a working language;ability to speak other languages is even better., • More than 5 years of work experience in developing overseas markets and serving overseas customers, with a proven track record in achieving sales targets., • Possess certain market analysis, marketing planning, and product promotion capabilities, with experience in formulating and executing effective sales strategies., • Strong logical and analytical skills, with the ability to interpret market data and make data-driven decisions; strong leadership to manage teams and drive collaboration., • Demonstrate an overall perspective and foresight to identify long-term market opportunities and respond to market changes., • Priority is given to candidates with experience in automotive diagnostic products, automotive repair market, or automotive tool agency industry. SALARY AND BENEFITS Competitive salary package, with negotiable salary and benefits for outstanding candidates (not limited to the published scope).Opportunities for professional development and training to support your career growth.A dynamic and inclusive work environment with a focus on teamwork and innovation. For more information about our company, please visit our official website： If you are passionate about the automotive diagnostic industry, have a proven track record in overseas sales, and are ready to take on new challenges, we look forward to receiving your application! “Click ‘Apply’ to share your resume and a brief note on how you’ve grown an overseas market—we’ll respond within 3 business days!”

Company Description OmniforceAI is a global AI automation consultancy specialising in agentic AI systems and business transformation. We build AI agents and systems that enable real-time operational intelligence for businesses across finance, consulting, and service industries. Role Description We're looking for an AI Agentic Engineer to support our team in designing and building production-grade AI agent systems for enterprise clients. You'll work directly with clients to architect multi-agent solutions, implement co-human/co-agent workflows, and deliver systems that meet regulatory and compliance requirements. What you'll do: • Design and implement multi-agent AI systems using LLMs, orchestration frameworks, and modern development tools, • Build production applications that integrate AI agents with existing business systems, • Participate in technical discovery calls with clients to scope and architect solutions, • Develop solutions for regulated industries requiring robust security and compliance, • Work with AI-assisted development tools (Cursor, GitHub Copilot) to accelerate delivery, • Collaborate with our team to establish technical standards and best practices What we're looking for: • Demonstrated experience building AI agent systems that have reached production, • Strong Python skills and experience with at least one orchestration framework (LangChain, LangGraph, CrewAI, or similar), • Experience integrating LLMs (OpenAI, Anthropic, or open-source models) into applications, • Practical knowledge of vector databases, RAG systems, and API/MCP design, • Ability to explain complex technical concepts to non-technical stakeholders, • Portfolio or GitHub examples of AI projects you've built Bonus points for: • Experience building systems for regulated industries (financial services, healthcare), • TypeScript/JavaScript experience, • Understanding of enterprise security and compliance requirements Role details: • Full-time, remote position, • Salary range: £33,000-£40,000 depending on experience, • Work with international clients across UK & US, • Small team environment with direct impact on company growth

A Test Engineer is sought with excellent diagnostic skills down to component level and with practical skills in building and fixing electronic and/or electromechanical equipment. You’ll get involved with the testing and assembly of a range of electronic radar systems and sub-assemblies. Requirements for the Test Technician include: • HNC or higher in Electronic / Electrical Engineering., • Proven experience of building, fixing and modifying electronic and/or electromechanical equipment., • Experience using a range of standard test equipment., • Strong fault diagnostic skills down to component level., • Ability to design and/or build prototype test jigs and assemblies., • Experience of inspecting and/or testing goods to IPC standards., • Great to see knowledge of radar systems. Reporting to the Senior Test Engineer, the Test Technician will work closely with the production, Engineering and Support teams; repairing and maintaining electronic radar systems, assembling and testing prototypes, providing technical support for field trials and demonstrations as well as ensuring lab facilities are functional and calibrated.

Software Engineer Backend | .NET | Azure | APIs for AI-driven products | 2 days a week in a Irelandoffice | Up to £55k (DOE) We are exclusively supporting a fast-growing SaaS business building modern software used by tens of thousands of customers across the UK and beyond. This is not about building thin wrapper APIs around legacy systems. The focus here is on API infrastructure that powers core products, third-party integrations and AI services, including systems that automate real end-to-end workflows, not just surface-level features. They are now hiring an Software Engineer to take real ownership of how services connect, scale and stay secure, while enabling new AI-driven capabilities across the platform. If you enjoy building production-grade APIs that sit at the heart of real products, not just support tools, this is exactly that kind of role. What you will be doing: You will design and build APIs that enable products, partners and AI services to work together, including: Building RESTful APIs using C# .NET, SQL and Azure Implementing secure authentication using OAuth, JWT and modern security patterns Exposing product capabilities for AI services and third-party integrations Producing clear API documentation using OpenAPI / Swagger Improving reliability with logging, monitoring and strong error handling Supporting CI/CD pipelines for automated testing and deployment Working closely with product and AI platform teams on how services are consumed This is a role with real technical ownership, not just tickets passed down a queue. What they are looking for: This suits someone who enjoys backend engineering and wants to step into more platform-level API work. You will likely bring: Strong experience building backend services in C# .NET Solid SQL and experience with relational databases Experience designing RESTful APIs and understanding HTTP fundamentals Familiarity with authentication approaches like OAuth or JWT Exposure to Azure and cloud deployment A testing mindset and care for clean, maintainable code Nice to have, not essential: API gateways or API management platforms Event-driven or message-based systems Building APIs for external partners or developers Supporting AI services via APIs This is a strong move for someone who wants to grow beyond simple CRUD services and into more platform and integration-led backend engineering. What’s next? We are managing this hire directly and working closely with the engineering leadership behind it. That means real insight, proper preparation and no CV disappearing into a black hole. If you want to work on APIs that actually matter to real products and real users, apply and we will take you through the details.

Code Wizards Group is a world leader in backend and multiplayer infrastructure for the gaming industry. From high-scale AAA console and PC games to fast-paced mobile indie titles, we empower studios to bring multiplayer experiences to life. Within the Group lie Multiplayer Wizards, whose sole responsibility is to help game studios to run and operate their game infrastructure seamlessly for the players. We're on the search for some DevOps Engineering talent to join the team on a permanent basis working on some specific game migration work. Are you a highly productive DevOps Engineer, looking to use your wealth of games industry knowledge and your technical DevOps skills to help keep games online and running, whatever challenges are thrown at you? In this role, you will use your skills to help educate others in the team and act as an escalation point for head-scratching problems. Incidents are no problem, and you are happy to pick up and run with an outage, working with internal teams and the customer to keep the game infrastructure online. DUTIES AND RESPONSIBILITIES • Diagnosing and performing root cause analysis on customer infrastructure, including in incident scenarios, • Proactively identify and raise methods of improving team efficiency and procedures to improve support to the customer, • Assisting with escalated issues and navigating scenarios across multiple teams, • Writing clean, scalable, and performant scripts & code, • Forming part of a regular on-call rotation supporting our customers and internal teams SKILLS AND EXPERIENCE • Experience working in the gaming industry having migrated a live service game in production., • Knowledge of backend systems for online games and ideally exposure to game engines, Unity, Unreal etc., • An excitement to expand your knowledge on unfamiliar infrastructure and tools, • Automation knowledge on a wide variety of tools – Ansible, Terraform, Grafana, and Kubernetes, etc., • Prior experience migrating a game from one Cloud provider onto AWS, • Excellent knowledge of containers, virtual machines and Linux server administration, • Demonstrable experience in programming or personal code-based projects. Please note, initially, we will be looking at people with knowledge of the Games Industry.

Lead AI Engineer UK - Remote Portugal - Remote There are NO limits to your career: come shape the future and be part of a truly unique global culture at OutSystems! About This Role As a Lead AI Engineer in our Artificial Intelligence Group, you will be working on our Mentor line of products. Your main role will be to design and bring to life AI products and features applied to the problem of Enterprise Vibe Coding (vibe coding for “serious software”), covering the full Software Development Lifecycle. To do this, you will work alongside the rest of the group to push the state-of-the-art and build the next generation of AI-native developer tools. The sky's the limit and you’ll help us get there. Key Responsibilities • Stay up to date with the state-of-the-art in Artificial Intelligence and Machine Learning, and apply it to the problem of Enterprise Vibe Coding;, • Make use of techniques such as In-Context Learning (Prompt Engineering & Retrieval Augmented Generation) and Tool Calling to guide Agents to perform as intended;, • Work in an “eval-driven development” methodology, applying evaluation techniques such as model-based critiques, semantic accuracy benchmarks, and tool-use success rates as the basis for developing robust, reliable, and production-ready LLM Agents;, • Work across the entire lifecycle of product development, from ideation, through prototyping and designing to implementation and evaluation;, • Collaborate with cross-functional teams to ship and iterate on production-grade AI products;, • Own the end-to-end development of AI features of a customer-facing product, ensuring software quality, observability and scalability;, • Be a thought leader in the space, advancing the field by putting the most forward ideas into practice in a large-scale project. Qualifications / What You Need To Succeed • Ph.D. or MSc degree in Computer Science, Electrical Engineering, Artificial Intelligence, Machine Learning, or related technical fields is highly valued., • 7+ years of work experience in Machine Learning and AI Engineering roles, preferably building with LLMs and/or Agentic Systems, from development to production., • Hands-on experience with LLM frameworks (e.g. langchain, langgraph, llamaindex, langsmith), AI platforms (e.g. Databricks, mlflow) and containerization solutions (e.g. Docker) is valued., • Strong software engineering fundamentals and proficiency in Python are a must., • Be creative, ambitious and curious. Be resourceful and innovative. The Longer Story: OutSystems enables enterprise teams to build AI-powered applications and agents that reduce manual work, streamline internal operations, and accelerate impact. A proven low-code foundation combined with agentic AI and AI app generation capabilities empowers teams to move up to 10x faster with the assurance of security, scalability, and governance built in. As the future becomes agentic, our customers need us now more than ever. AI has opened the door to extraordinary possibilities—but inside the enterprise, things are moving fast and feeling chaotic. Some early adopters are making progress in production, but for many, AI tools are sprawling without governance, data isn’t ready, and talent isn’t there yet. Enterprises are still drowning in application backlogs and struggling with legacy systems. But with the right platform, AI doesn’t have to add to the chaos. It can become the breakthrough that brings clarity—and drives real, enterprise-wide impact. At OutSystems, we’ve built that platform, providing the tools necessary for enterprises to overcome these hurdles. We are looking for passionate, talented, and motivated people to join us in helping our customers build, deploy, and scale apps and agents—fast, helping them accelerate innovation while enabling secure, governed human-AI collaboration. OutSystems is a truly global company, with more than 850,000 developer community members, 1,700 employees, more than 500 partners, and thousands of active customers in over 75 countries and across 21 industries. Founded in 2001, OutSystems has offices in the United States, United Kingdom, the Netherlands, Portugal, Germany, the UAE, Japan, Hong Kong, Malaysia, Australia, India, and Singapore, and of course has a thriving, worldwide community of remote employees. Amongst our customers are some of the world's most recognizable brands across diverse industries—brands like Toyota, Heineken, Bosch, KeyBank, and UCLA. These customers are the reason we have a 4.6 star rating on G2. Their success is ours, and their stories demonstrate tangible ROI and transformational impact. We are a 9x Gartner Magic Quadrant Leader for Low-Code Application Platforms and a multi-year leader in the Forrester Wave. We’re recognized not just as leaders but as visionaries with a strong ability to execute, now extending our leadership into the AI and agentic application development arena. Working at OutSystems Our goal is to ensure that OutSystems is a place for bright, happy, and motivated people who share a common purpose and take pride in doing excellent work to pursue our vision of providing the AI-powered low-code development platform enterprise leaders trust to build, secure, and evolve their business applications, agents, and core systems. Our culture is focused on our core values of trust, customer success, innovation, and alignment. Our team members operate with transparency, integrity, and accountability, define success through the lens of the outcomes we deliver for our customers, push the boundaries with excellence, and work together toward our shared vision to deliver on what matters most. What do we have to offer you? • A company that is always growing, changing, and innovating. We challenge each other to innovate in our products, in our team, and how we use our own technology. And we give our teams space to be proactive and creative., • Real career opportunities. We care about growth and development. Yes, vertical career progression is a possibility, but it's not the only one. From lateral moves and joining different teams to mastering specialized skills, we support your growth no matter what your goals are., • Work colleagues that are as smart, hard-working, and driven as you. We act as one global OutSystems team, taking ownership and working together toward a shared vision., • Disrupting the status quo is in our DNA. In fact, it’s why our company exists., • We ask “why” a lot. It helps us connect our individual work to the bigger picture and sometimes even uncover a better way. Are you ready for the next step in your career? Then we’d love to hear from you! OutSystems nurtures an inclusive culture of diversity, where everyone feels empowered to be their authentic self and perform at their best. A company that embraces the creativity and innovation that comes through diverse perspectives. We are committed to creating a team that reflects society through inclusive programs and initiatives and are proud to be an equal opportunity employer. All qualified applicants receive equal consideration regardless of race, place of origin, color, age, marital status, religion, sex, sexual orientation, gender expression or identity, protected veteran status, disability status or any other status protected by law.

Contract Role Location: Silverstone- 5 days a week on site IR35: Inside Length of contract: 3 months The Cadillac Formula 1® Team is what happens when history, purpose and daring talent come together. Backed by TWG Global and GM, our team is uniquely positioned to disrupt Formula 1®, bringing a fresh perspective and an unrelenting drive for success. We have the energy of a start-up, with the ideas and originality of a business that always wants to lead, never wants to follow. We’re building everything from the ground up, from a high-performance car to an inclusive, values-driven culture. We show bold ambition. We combine leadership in innovation with excellence in execution. We are one team. We have the freedom to think differently, the opportunity to shape process and practice, an ego-free environment where people thrive on being challenged by those around them. A historic name behind us. Career-defining moments ahead. This is history in the making. Join us. Fueled by bold ambition: Play your part in getting us on the grid. As a Composite Trimmer at the Cadillac Formula 1® Team, you will play a crucial role in the finishing processes of composite components. You will be responsible for trimming, sanding, and preparing components for assembly, ensuring that all work is completed to the highest quality standards. This position requires attention to detail and a commitment to quality workmanship. • Trim and finish composite components according to engineering specifications and quality standards., • Utilize hand and power tools effectively and safely during the trimming process., • Inspect finished components for defects, ensuring compliance with quality requirements., • Collaborate with assembly and production teams to ensure timely workflow., • Maintain a clean and organized workspace, adhering to safety protocols., • Assist in identifying areas for improvement in the trimming process., • Participate in training and development to enhance technical skills related to composite trimming and assembly. Driven by high performance: What do you need to bring to the team? • Experience in composite trimming/Fitting, preferably within the F1/motorsport or aerospace sectors., • Ability to read and engineering drawings., • A methodical and thorough approach to with excellent attention to detail with a can-do attitude, • Proficiency in using hand and power tools associated with composite trimming processes., • Strong attention to detail and commitment to producing high-quality work., • Ability to work effectively in a team and communicate clearly., • Experience in a fast-paced and dynamic environment with a willingness to be flexible during busy periods., • Experience of assembling Class A components while following QA documentation and company processes, • Experience of in line inspection/scanning would be desirable., • Strong problem-solving skills and a proactive approach to tasks., • Willingness to learn and adapt in a continually evolving industry., • Adherence to safety and quality standards in all aspects of work A team like no other. The Cadillac Formula 1® Team challenges conventions and redefines success through bold ambition, cutting-edge innovation, and an unwavering commitment to precision and excellence—on and off the track. This includes offering industry-leading pension, generous time off and, as part of a global brand, huge potential for career development. Please be aware that we will be reviewing applicants on a rolling basis and this job posting will close once a suitable candidate is identified. We encourage all interested individuals to submit their application as soon as possible. As an equal opportunities employer, we are committed to the equal treatment of all current and prospective employees and does not condone discrimination on the basis of age, disability, sex, sexual orientation, pregnancy or maternity, race or ethnicity, religion or belief, gender identity or marriage and civil partnership. We aspire to have a diverse and inclusive workplace and strongly encourage suitably qualified applicants from a wide range of backgrounds to apply. At Cadillac Formula 1®, all Team Members are expected to actively support and uphold our policies and procedures, including those focused on Environmental responsibility, Sustainability initiatives, Inclusion and Health and Safety practices. Please note that additional security checks may be required as part of the recruitment process. This may include a background check covering a minimum of the past five years and a criminal record check.

My client is a leading organisation in Secure communications and Data at Rest domain! They are expanding their UK team to support multiple Cyber and Information Assurance development projects. The company is seeking an experienced FPGA Design Engineer to join a fast-paced, multi-disciplinary environment focused on both standard products and bespoke secure digital design solutions. This role involves full lifecycle ownership of FPGA solutions-from requirements and architecture through implementation, verification, and production. The position covers complex FPGA designs incorporating both industry-standard and custom protocols. Key Responsibilities include - * Own the delivery of FPGA solutions from requirements through to production. * Lead the elicitation and interpretation of requirements for FPGA implementations. * Define FPGA architecture in collaboration with the wider development team. * Work alongside Project Managers to plan and deliver against project timelines. * Coordinate other FPGA engineers when required. * Liaise with external FPGA and IP suppliers. * Develop test benches and perform in-system testing. * Contribute to proposals, estimations, and technology roadmaps when needed. Essential Skills & Experience - * Proven track record delivering FPGA designs across the full development lifecycle. * Strong VHDL skills for FPGA design and verification. * Experience optimising designs for performance and power efficiency. * Experience debugging and integrating FPGA solutions in hardware. * Proficient with configuration management tools. * Experience with Microchip devices and Libero for design synthesis (advantage). * Experience verifying HDL using ModelSim or Questasim (UVM beneficial). Desirable Skills - * Requirements analysis and management (e.g., DOORS). * Experience with SmartFusion, PolarFire or Igloo devices. * Knowledge of PCIe NVMe implementations in FPGA. * Experience with Xilinx or Altera devices/toolchains. * Familiarity with 3rd-party IP integration. * Design for security principles. * Embedded firmware development (C/C++/assembler). * Understanding of cryptographic algorithms and standards. * Experience integrating FPGAs within larger hardware platforms. If you're interested in this role, then please apply. I will reach out to you via phone call to discuss further! Desired Skills and Experience FPGA Development, FPGA Engineer, Firmware Engineer, Full lifecycle, Requirements, Architecture, Coordination, Test bench development, VHDL, Xilinx, Power dissipation, Integration, Debugging, HDL, Modelsim, Questasim, DOORs, Altera, 3rd party IP, C, C++, assembler.

PROJECT DESCRIPTION Join a fast-moving, outcome-driven engineering team that builds high-quality simulations and real-time experiences using commercial and proprietary game engines. You’ll shape how we exploit, extend, and integrate engines to solve complex systems problems, influence product roadmaps, and mentor engineers across disciplines. If you love squeezing performance from engines, building robust pipelines, and turning prototypes into production-grade systems, this role is for you. SKILLS AND KNOWLEDGE REQUIRED Must Have • Proven experience as a game developer, engine engineer, or simulation engineer working with commercial game engines (Unreal, Unity, or similar)., • Good C++ skills and practical experience with Python and Lua scripting., • Demonstrable track record of engine exploitation: profiling, optimization, custom module/plugin development, and toolchain integration., • Systems thinking: you design solutions that consider performance, maintainability, and operational constraints., • Experience with rapid prototyping, iterative design, and stakeholder-driven development., • Strong stakeholder management and the ability to translate user needs into technical requirements., • Excellent communication skills and a collaborative mindset. Desirable • Degree in a STEM field, ideally to Masters level., • Experience with animation pipelines, 3D modelling, or content creation workflows., • Familiarity with HLA, DIS, or other simulation interoperability standards., • Background in UX/HMI design or human-in-the-loop simulation., • Prior experience working on security-cleared or regulated projects. TASKS REQUIRED • Lead engine-driven projects from concept through delivery, building demos, bespoke tools, and integrated simulations., • Exploit and extend game and simulation engines to meet performance, quality, and interoperability goals., • Design and implement robust systems using C++, Python, and Lua to automate workflows and integrate third-party tools., • Drive engine maintenance and optimisation, including profiling, memory and CPU tuning, and platform-specific improvements., • Collaborate across disciplines with systems engineers, software teams, Human Factors designers, and IT to deliver cohesive solutions., • Rapidly prototype and iterate, turning experimental ideas into validated features and production-ready components., • Mentor and document: capture knowledge, run workshops, and support junior engineers to raise team capability. KEY DELIVERABLES • Demonstrations, • Engine improvements and plugins, • Regular knowledge capture, management and sharing activities, • Upskilling of others, • Mentoring of junior staff

Due to increased work load we require a skilled and knowledgeable Quality Inspector to join our Quality Control team. The job will involve, • Conduct thorough inspections and testing of products, materials, or components to verify that they meet quality standards, specifications, and regulatory requirements in accordance with AS9100, • Maintain detailed records of inspection and testing results, including measurements, observations, and any defects or non-conformities found, • Ensure that products or processes adhere to established quality control standards and procedures, including compliance with industry regulations and safety standards, • Identify and document any defects, deviations, or non-conformities in products, materials, or processes and communicate this information to relevant personnel for corrective action, • Select random samples for inspection from production batches, shipments, or inventory to evaluate quality, • Conduct and document quality inspections of first article, in process and finished goods to ensure quality conforms to specified requirements, using measurement devices such as callipers, micrometers, shadow graph, digital height gauge and CMMs, • Report all non-conformances, unsafe conditions, broken or out of calibration equipment, procedures not in effect, to Team Leader, • Collaborate with production and engineering teams to identify opportunities for process improvements that enhance product quality and efficiency, • Perform visual and mechanical inspection functions against customer drawings with a good understanding of geometric dimensioning and tolerancing, • Review & interpret customer requirements, • Inspecting raw materials to ensure consistency and integrity, • Assist in the implementation of 5S and other Lean techniques for developing operational excellence, • Support HSE projects with a goal to certification to ISO 14001 and ISO 45001, • Comply with the company’s Health & Safety rules and regulations and help ensure compliance by all who enter or work at the company’s premises. Either directly or through those who report to you, support the work of the company’s H&S Committee The key skills we require are. • Extensive knowledge of Quality Control techniques, • Understand complicated engineering drawings, including geometric dimensioning and tolerances, • Be able to confidently use and operate the company’s measurement equipment, including micrometers, callipers, shadow graph, digital height gauge and the CMMs, • Willing to undertake or collaborate with defect root cause and analysis and suggest appropriate mitigation and preventative measures, • Knowledge of manufacturing and production processes, • The ability to perform a muti-task job and adjust priorities as instructed by the Team Leader, • Possess time management skills. Be able to take the initiative to meet deadlines and can prioritise workload with minimal supervision, • Pro-active approach to maintaining the Health & Safety of all employees. Ideal experience will include, • Working within a QMS and a working knowledge of AS9100 requirements, • Knowledge of Inspection and measurement techniques, • Ability to use mechanical measuring equipment, with CMM experience desirable, • Understanding of Geometric Dimensioning and Tolerancing (GD&T), • Having the ability to conduct FAIRs to AS9102, • Experience of using structured problem-solving techniques desirable, • Experience of internal auditing to ISO9001 or AS9100 desirable, but not essential, • Experience with assisting with PPAP’s, APQP’s or PFMEA’s, • Understanding of SPC/SQC desirable, but not essential, • Not essential, but beneficial, would be a basic knowledge of the ISO45001 (H&S) and ISO14001 (Environmental) Standards Equal Opportunities We welcome people from all backgrounds and are committed to creating an inclusive recruitment process. If you require any reasonable adjustments during the recruitment process, please contact and we will be happy to support you. Please note we do not accept CV's from Recruitment Agencies.

Purpose and objectives of the role The Quality Engineer will support our PCB within their Quality Department in carrying out activities to ensure product integrity in accordance with all required quality specifications, standards, goals, and objectives. Support the conformity of the quality management system. Main duties and responsibilities • Perform quality Inspections of customer-specific critical parts., • Handling rejected/ defect materials and returns as they arise. This includes: Segregating and quarantining non-conforming products where necessary and liaising with suppliers/ customers., • Raise/ address non-conformances as required., • Support in the reporting of quality metrics in relation to these issues., • Addressing customer complaints to identify the source of the problem, root cause analysis and implementation of corrective and preventative actions., • Check that documents are at the correct revision level and completed correctly., • Documentation/ records are completed in line with Good Documentation Practice., • Ensuring tests pass prior to release and any applicable Change Notes / Concessions have been documented., • Support in driving continuous improvements throughout the organisation., • Report writing, including FAI and CAPA., • Support the Divisions' Apprenticeship programme by mentoring and educating the Divisions' Apprentices., • Maintain time and attendance to company standards, • Observe the Health and Safety regulations laid down in company procedures and government legislation All employees may be required to carry out other tasks as necessary for the business. These tasks will be appropriate to their skills and experience and will not be unreasonable. Qualifications • Educated to Degree level in either engineering or Life Sciences (or equivalent) or relevant industry experience Skills and Experience • Knowledge of MRP/Q Pulse is advantageous, but training will be provided., • Awareness of IPC Standards and/or experience in PCB Inspection., • Awareness of quality standards – BS EN 9100/9001., • An enthusiastic self-starter with a good eye for detail and the ability to complete tasks/ objectives., • Analytical and problem-solving skills., • Internal auditing experience is advantageous but not essential., • Good Timekeeping and attendance, able to work a 2-shift rotation., • Ability to work in a fast-paced, high-technology production environment., • Ability to work as a member of a team and assist in the smooth running of the department to meet required output., • Excellent workmanship and attention to detail., • Self-disciplined and able to work with minimum supervision., • Working Knowledge of Microsoft Office – Excel, Word, Outlook., • Good communication skills. Experience • Previous experience in electronic manufacturing or manufacturing environment, preferred but not essential, as full training is given. Working Hours • 37.5 hours Monday to Friday, • 2 Shift pattern, • Early Shift 08:00-16:00 (30-minute lunch break), • Back Shift 10:00-18:00 (30-minute lunch break) Why Zot? • Nearly 50 years of Engineering experience in all aspects of Manufacturing, • 30 days paid holiday per year (this includes 8 public), • Workplace pension scheme, • Shift allowance (where applicable), • Excellent on-the-job training, • Apprenticeship schemes available, • Sage Benefits including many shopping discounts, • Employee Assistance programme., • Good transport links and on-site car parking, • Equal Opportunities Employer

Senior AI Engineer The Essentials Location Remote UK, with expectation for attendance in the office for team meetings (approx. every two months) Employment Type Full-Time, Permanent The Opportunity Are you interested in making a difference by developing products used by the world’s largest Pharmaceutical Companies? Are you interested in working with pioneers in the field of AI and software engineering? Are you interested in innovating for impact? If you are then read on for a role with a difference where you can join our inspiring team and make a big difference with class-leading solutions. We are expanding and looking for an AI Engineer to join our team developing ground-breaking products using the latest AI and LLM (Large Language Model) agentic technologies. Our innovative solutions are transforming the industry, and we are looking for passionate individuals to join us in our mission to revolutionise healthcare in a role with a difference. Job Description We are seeking an AI Engineer with expertise in building scalable, production-grade systems and a passion for AI/LLM technologies and innovation. You will design, develop, and maintain our platform’s backend infrastructure, focusing on multi-tenant architectures, security, and efficient LLM integration. This role requires a strong understanding of Python web frameworks, cloud services (particularly AWS), and modern AI approaches including working with agentic architecture. Key Responsibilities Backend Development & Architecture - Design and implement scalable Python backend services, architect and maintain secure, high-performance, production multi-tenant systems, and develop RESTful and asynchronous APIs for internal and external use. LLM, Agents & AI Integration - Drive R&D innovation to meet client goals by building AI agentic workflows, advanced search, robust interaction and context management, and extending core model capabilities and protocols. Leadership & Collaboration - Collaborate on UI/UX integration, code reviews, architecture and roadmap decisions, and cross-functional work with data science, product, and commercial teams. Data Engineering - Design and maintain efficient data pipelines, ensuring smooth data flow between systems and LLM components while implementing robust validation, transformation, and enrichment processes. Cloud & Infrastructure - Design and implement AWS-based cloud infrastructure using infrastructure-as-code approaches and maintain CI/CD pipelines for reliable deployment and testing Security & Compliance - Operate to the highest security standards as expected by ISO27001 Qualifications and Skills Required Skills and Experience Ø 5+ years of Python backend development experience (fewer years’ experience is acceptable for exceptional candidates) Ø Strong experience of using LLMs/AI in a production setting and use of the latest techniques working with LLMs Ø Strong knowledge of cloud services (preferably AWS) and infrastructure-as-code Ø Experience with containerisation, orchestration, and CI/CD pipelines Ø Understanding of database scaling, caching strategies, and performance optimisation Ø Familiarity with LLM technologies and latest utilisation methodologies, including agentic workflows Ø Strong understanding of software design principles and coding standards Preferred Skills and Capabilities Ø Familiarity with React or other frontend technologies for better cross-team collaboration Ø Experience implementing LLM integration frameworks Ø Background in pharmaceutical or healthcare domain Ø Familiarity of working to ISMS ISO27001 standards Ø Growth mindset combined with tenacity Ø Entrepreneurial approach driven by curiosity and innovation Ø Deep customer centricity What We Offer Ø Competitive salary and benefits Ø Opportunities for professional growth Ø Flexible work hours and remote work Ø Collaborative, inclusive work environment Ø Chance to work on cutting-edge AI technologies with real-world impact Selection process • Screening interview with HR, • Introductory interview with hiring manager/technical exercise, • Capability interview with CEO/team members Circuit Medical Circuit Medical is a well-established, research-driven global consultancy that specialises in delivering comprehensive services to maximise the value of medical affairs and other functions to the biopharmaceutical industry. We proudly support leading global pharmaceutical companies such as AstraZeneca, Roche, Takeda, and many others. As we expand our digital offerings, we are building a suite of products aimed at enhancing quality, efficiency and performance for our clients and ultimately help patient care. Circuit Medical excels by being different, curious, innovative, working with ambiguity, being collaborative, communicative, all for the greater good and always delivering to a high quality. Circuit Medical welcomes everyone and creates inclusive teams where we celebrate different backgrounds, experiences, and perspectives. We encourage colleagues to bring their whole selves to work. We provide equal employment opportunities to applicants and employees without regard to race, colour, religion, age, sex, sexual orientation, gender identity, national origin, or disability. We promote a culture of trust, support, and acceptance.

About the Job Location: Remote/Occasional On-site, must be UK based Company: Dynamics Connect Day Rate/Hourly Rate: Freelance Expertise in all BC modules including Finance, Manufacturing & Warehousing Dynamics Connect is a UK based Microsoft Business Central partner, we specialize in delivering Buisness Central to businesses across multiple industries. We’re looking for a talented pre-sales consultant to join our team on a freelance basis initially to help with demonstrations and shaping digital transformation for our clients and prospective clients. What You'll Do • Deliver compelling product demonstrations, workshops, and proof‑of‑concepts tailored to industry needs., • Collaborate closely with sales, delivery, and technical teams to design innovative, scalable solutions, • Client Consultation: Provide expert advice on ERP best practices and process improvements in finance, inventory, production, and supply chain, • Support RFP/RFI responses with clear, value‑driven content., • Act as a trusted advisor, guiding clients through best practices and solution possibilities. What We're Looking for • Experience in Dynamics 365 Business Central – pre-sales mainly, consulting and implementation roles are a positive, • Strong knowledge of Finance, Manufacturing, and Warehousing processes and their Business Central applications, • Ability to analyze business requirements and translate them into efficient ERP solutions, • Experience with Power Platform, and integrations is a plus, • Excellent problem-solving skills, communication, and client-facing experience. Apply today or reach out for a chat! No agencies.

Company Description More Food is a family-run bakery specializing in premium handmade cakes and indulgent treats. Located in the picturesque Sussex Downs, we focus on using high-quality ingredients to create products with exceptional flavor and taste. With a 30,000 sq ft BRC Grade A* factory, we have established ourselves as a trusted supplier to retailers, wholesalers, garden centers, coffee shops, and delis. Our baked-to-order approach allows us to offer an extensive range of cakes and even custom options to meet unique customer needs. At More Food, our commitment to excellence is at the heart of everything we do. Role Description This is a full-time, on-site role for a Technical Manager, based in West Sussex. The Technical Manager will oversee daily bakery operations, ensuring compliance with food safety and quality standards. Responsibilities include managing technical support, leading research and development projects for new products, analyzing production processes for enhancements, and coordinating cross-functional teams. The role requires effective team management and project oversight to uphold high operational standards and deliver exceptional products to our clients. Qualifications • Strong Analytical Skills for process evaluation, problem-solving, and decision-making, • Proven Team Management experience, with the ability to guide and motivate staff, • Proficiency in Technical Support to address production challenges and maintain operational efficiency, • Experience in Research and Development (R&D) for product innovation and improvement, • Competency in Project Management, including planning, execution, and completion of technical initiatives, • Knowledge of food safety and quality standards (e.g., BRC certification), • Bachelor’s degree in Food Science, Engineering, or a related field is preferred, • Excellent organizational and communication skills

Senior Account Manager – Property Marketing Central London £45,000–£50,000 Are you a seasoned Account Manager with a passion for property and a talent for strategic marketing? We’re partnering with a leading property marketing collective in Central London who are looking for a Senior Account Manager to lead client relationships and deliver outstanding multi-channel campaigns across the real estate and built environment space. In this role you’ll be at the heart of projects that bring property brands, developments and places to life — from strategic planning and creative direction to digital, social, print and experiential execution. You’ll manage a portfolio of key accounts across the property sector, becoming the trusted day-to-day contact for clients while working closely with design, digital and production teams to create standout marketing work that drives results. What you’ll be doing: • Build and maintain strong client relationships with property developers, agents and stakeholders, • Lead strategic account planning and campaign development, • Coordinate cross-disciplinary delivery — from digital and social campaigns to visual identity and launch collateral, • Ensure projects are delivered on time, on brief and on budget, • Support business growth through exceptional service, client advocacy and new business opportunities Who we’re looking for: • Proven experience in account management, within property, real estate, creative or integrated marketing environments, • Excellent communication, organisation and leadership skills, • A strategic thinker with hands-on delivery capability, • Confidence managing projects across teams and touchpoints, • A keen interest in property, place and brand storytelling Why this is a great move: • Central London base with hybrid working flexibility, • Competitive salary reflective of experience, • Opportunity to work across award-winning property marketing brands, • Career progression in a growing, forward-thinking collective Ready to take your next step in property marketing? Apply now or get in touch to learn more!

Head of Engineering A growing design and manufacturing business is seeking a Head of Engineering to lead its multi-disciplinary engineering function through an exciting phase of product innovation and international growth. This strategic role sits within the senior leadership team and offers a clear pathway to Engineering Director. About the Role As Head of Engineering, you will own the long-term technical direction of the company while managing the day-to-day performance of the engineering team. You will drive product innovation, ensure machinery meets modern safety and compliance standards, and elevate engineering capability across design, documentation, and customer delivery. This role combines leadership, technical oversight, and cross-functional collaboration - including close interaction with production, service, and commercial teams. It suits a hands-on engineering leader who thrives in a design-led OEM environment. Key Responsibilities Lead, mentor and develop a multi-skilled engineering team. Drive innovation by identifying opportunities for new technologies, improved safety, cost reduction and better performance. Oversee the design, improvement and update of machinery and systems. Ensure technical compliance with CE/UKCA/UL and other relevant standards. Supervise the creation of technical documentation, risk assessments and design FMEAs in line with modern health & safety legislation. Support customer-facing technical functions including spares, service, installation and commissioning. Contribute to strategic direction, succession planning and continuous improvement. Requirements Degree in Mechanical or Electrical Engineering (or related discipline). Proven experience in an OEM design and manufacturing environment. Track record of delivering engineered products or capital equipment to international customers. Minimum 5 years in a senior engineering leadership role. Strong communication, supervisory and stakeholder management skills. Desirable Skills Experience delivering capital projects to global clients. Background as an Engineering Manager (or equivalent senior technical role). Exposure to production, installation or service environments. What’s Offered Senior leadership role with defined progression to Engineering Director. Influence over long-term product and technology strategy. Opportunity to modernise and grow an established engineering function. Collaborative environment within a forward-thinking manufacturing business.

Full Stack Engineer (Java, React, AI/ML/LLM/SDK) – Cutting-Edge Series B scale up Location: Remote EU - Spain Salary: £70K - £110K About: We are seeking a Full Stack Engineer with a proven track record in building and scaling applications powered by Large Language Models (LLMs). This role requires deep expertise in Java, React, and modern AI/ML development, including LLM frameworks, SDKs, and retrieval-augmented generation (RAG) systems. Key Responsibilities • Design and develop scalable full-stack solutions involving both frontend (React/TypeScript) and backend (Java)., • Build and optimise AI/ML pipelines leveraging LLMs and RAG architectures., • Develop SDKs and APIs to support AI-driven applications in resource-constrained or production-grade environments., • Collaborate across engineering, product, and research teams to drive innovation in AI/ML-based products., • Ensure high performance, testability, and reliability across the stack. Key Qualifications • Strong proficiency in Java and React/TypeScript, • Hands-on experience building and deploying LLM-based systems (e.g., OpenAI, Hugging Face Transformers, LangChain, etc.)., • Deep understanding of AI application architecture, including RAG systems, vector databases, prompt engineering, and fine-tuning., • Experience with ML model serving, SDK development, and working in production-grade environments., • Ability to work across the full stack and thrive in a fast-paced, collaborative environment., • Product-focused engineer What We Offer: • The chance to work with cutting-edge hardware technologies in a high-growth environment., • A collaborative team culture that values innovation and technical excellence., • Competitive salary and benefits package.

Vice President of Engineering Location: Remote (Ideally need to be based in the UK) Salary: £140,000–170,000 base + equity + benefits About the Company Join a Series A–funded digital asset risk-management platform backed by Microsoft, Coinbase, Samsung, Nyca, and Neotribe. With $22M raised and three years of financial runway, the company powers real-time risk monitoring, analytics, and intelligence insights for financial institutions, custodians, tokenized-asset issuers, and regulators. Their mission is to enable safe, compliant, scalable blockchain participation for institutions on a global scale. About the Role As VP of Engineering, you will lead and scale the engineering organization responsible for delivering the company’s core risk platform. You’ll define technical direction across architecture, data infrastructure, analytics systems, and compute pipelines, while integrating emerging intelligence-driven capabilities such as automated risk scoring, alerting, reporting, and anomaly detection. You’ll work cross-functionally with Product, Analytics, and Customer Success, operating as a technical and strategic leader shaping the next phase of platform evolution. Key Responsibilities Engineering Leadership & Execution • Lead engineering teams across backend, frontend, SRE, data platforms, and risk analytics., • Drive execution of the engineering roadmap, delivering secure, scalable enterprise software., • Define engineering processes that promote iteration, performance, and predictable delivery in a remote-first environment. Architecture & Platform Direction • Own end-to-end evolution of platform architecture: ingestion pipelines, scoring engines, real-time compute, APIs, and integrations., • Guide system design decisions that ensure resilience, scale, and extensibility amid growing regulatory and market complexity., • Lead technical direction for enterprise deployments, POCs, and customer integrations. Data Infrastructure & Analytics • Scale the data platform to support broader asset coverage, higher throughput, and more sophisticated analysis., • Develop advanced analytics capabilities including anomaly detection, cross-chain signals, and automated scoring models., • Ensure data accuracy, quality, and resiliency across pipelines and computation layers. Emerging AI & Automation Capabilities • Introduce new automation, reporting, and workflow intelligence features., • Integrate AI-powered classification, alerting, risk scoring, and customer-facing insights securely and transparently., • Ensure future enhancements remain enterprise-ready, explainable, and compliant. Cross-Functional Collaboration • Work with Product and Analytics to convert customer needs into technical execution plans., • Support Sales Engineering and BD by communicating technical capabilities and roadmap direction., • Serve as a technical leader in customer evaluations, deployments, and audits. Technical Skills & Required Expertise The role requires deep hands-on architectural and technical leadership across distributed systems, data platforms, and analytics tooling. Languages & Backend • Python, Go (Golang), TypeScript, • Strong understanding of distributed systems, microservices, API-driven architectures Data & Analytics • AWS Redshift, Athena, DynamoDB, Snowflake (or equivalent cloud data warehouses), • Kafka, Kinesis, or other streaming/event platforms, • Experience building large-scale ingestion and normalisation pipelines, • Experience with analytics engines, scoring frameworks, and real-time compute Cloud & Infrastructure • AWS preferred (EKS, Lambda, S3, IAM, CloudWatch, ECS), • CI/CD tooling, infrastructure-as-code, observability, monitoring, deployment pipelines, • Experience operating highly available systems in production environments Security, Compliance & Enterprise • Secure systems design, identity/auth workflows, audit trails, • Enterprise-grade performance monitoring, SLAs, and reliability metrics Domain Expertise • Blockchain data platforms, node infrastructure, or crypto risk systems, • Analytics-heavy or automation-centric enterprise platforms What Sets This Role Apart • Lead engineering for a category-defining risk platform transforming blockchain compliance and safety., • Set foundational architecture powering global financial institutions and regulators., • Build and scale a world-class engineering org across multiple disciplines. Perks & Benefits • Competitive salary + meaningful equity, • Medical insurance (location dependent), • Fully remote + home office budget, • Supported attendance at blockchain conferences, • Opportunities to collaborate globally and shape emerging industry standards

About Us Innovation is at the heart of everything we do at Offshoot Operations. Our Graphics Team delivers end-to-end solutions for broadcasters, sports federations, and facility providers, encompassing design, data and social integration, motion graphics, hardware, and operational support. Our recent projects include major boxing World title fights, Games of the Future esports, Wimbledon, the Professional Fighters League (Europe, Middle East and Africa), the National Cycling Championships, and Glastonbury. The Role We’re expanding our graphics development team and looking for a skilled Graphics Developer with proven Vizrt experience. This is a hands-on development role focused on building real-time graphics packages, integrating live data feeds, and developing companion tools that streamline broadcast workflows. You’ll work closely with our design and operations teams to deliver high-performance graphics solutions across a range of sports and entertainment productions. The role is UK-based with remote flexibility and occasional international travel. What You’ll Be Doing Graphics Development • Design and build real-time graphics templates using Vizrt Artist and Adobe tools, • Integrate live data feeds and ensure reliability in broadcast environments, • Develop companion GUIs to streamline graphics prep and reduce operator workload, • Maintain high standards of visual design, performance, and version control, • Collaborate with clients and internal teams to evolve graphics solutions Technical Collaboration • Work closely with developers, designers, and engineers to integrate graphics systems, • Support implementation of new tools and workflows across the graphics pipeline, • Maintain awareness of evolving broadcast technologies and contribute to continuous improvement, • Support setup, testing, and refinement of graphics packages ahead of events What We’re Looking For Essential Skills • Viz Artist, • Adobe After Effects and understanding of broadcast codecs, • Familiarity with data integration workflows (Excel, JSON, XML, UDP) Key Personal Qualities • Strong desire to learn and develop new creative and technical skills, • Calm under pressure, with excellent troubleshooting instincts, • Clear communicator with a collaborative mindset, • Adaptability to work across varied clients, technologies, and production styles Salary: Dependent on experience. Schedule: Includes evening and weekend work. Location: UK based development (Remote). UK & International travel, if required to support projects.