Trabajos troubleshooting en NorwichCrear alertas

Launch Your Cyber Security Career – Job Guaranteed! Cyber attacks are rising, and companies need skilled professionals now more than ever. With Newto Training’s Cyber Security Career Programme, you’ll gain 4 top certifications (Azure Fundamentals, CompTIA Security+, CompTIA CySA+, Forescout FSCA) plus real-world project work that doubles as hands-on experience. 100+ hours of live training Practical skills in troubleshooting, networking (Cisco), Azure cloud, Splunk SIEM & Tenable vulnerability management Job guarantee with our hiring partners Get certified, get experience, get hired. Apply today and start your journey into cyber security. Course cost - £2995, or, £249.58 per month We guarantee you will be offered a job upon completion, or we will refund you 100% of your course fees.

Your new companyWe have an exciting new opportunity for a Mechanical Technician for a well-known manufacturer based in Norwich. Reporting to the site Maintenance Manager, you will work alongside a team of experienced technicians on the site maintenance plan and periodic site shut-downs.Your new roleYou will ensure that pumps, valves, mixers, reactors, and other mechanical systems operate safely and efficiently to support continuous manufacturing. This often includes handling hazardous materials, performing preventive maintenance, and supporting process operations. • Maintain and repair mechanical equipment such as pumps, control gear, and rotating machinery., • Investigate equipment failures and perform corrective actions to minimise downtime., • Perform routine inspections and statutory checks, ensuring compliance with safety and environmental regulations., • You will ideally have completed a mechanical apprenticeship, NVQ, HNC, or equivalent with strong mechanical troubleshooting skills., • Experience in chemical, process, or manufacturing environments is highly valued. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Annual Bonus, Private Healthcare, Long Service Bonus, and Training! Are you an IT Support Technician or IT Support Engineer and feel like you’re being held back in your current role. This local MSP encourage their Engineers to get involved in all levels of tickets, whilst still be dedicated to their most comfortable level of ability. With a “Teamwork” approach to getting through tickets, your day-to-day will be mixed from standard service desk problems to project planning and implementation. You will be supported in your growth through training and gaining the right qualifications. Responsibilities: • Acting as the initial point of contact for incoming calls to the service desk, • Monitoring ticketing system and triaging new tickets appropriately, • Troubleshooting issues both remotely and on site, • Configuring new equipment as per project specifications, • Willingness to participate in an on-call support rota and occasional pre-planned out-of-hours project work Technical Skills: • Experience troubleshooting Windows desktop operating systems, • Experience troubleshooting Microsoft 365 apps including OneDrive/Teams, • Ability to diagnose basic networking issues, • Familiarity with Routers, Switches, Access Points and other networking hardware If you’re interested in applying or require more information, please contact Shaun Lohan at Atkinson Moss. If you have an up-to-date CV please include it with your email. Not the job for you? Please do reach out as we have multiple Technology Jobs available in Norfolk and Suffolk.

Launch Your Network Engineer Career – Job Guaranteed! With Newto Training’s Network Engineer Career Programme, you’ll gain 4 top certifications (Azure Fundamentals, CompTIA Network+, uCisco CCNA, Forescout FSCA) plus real-world project work that doubles as hands-on experience. • 100+ hours of live training, • Practical skills in troubleshooting, networking (Cisco), Azure cloud, Splunk SIEM & Tenable vulnerability management Apply today and start your journey into networking. Course cost - £2795, or, £232.91 per month We guarantee you will be offered a job upon completion, or we will refund you 100% of your course fees.

Launch Your Network Engineer Career – Job Guaranteed! With Newto Training’s Network Engineer Career Programme, you’ll gain 4 top certifications (Azure Fundamentals, CompTIA Network+, uCisco CCNA, Forescout FSCA) plus real-world project work that doubles as hands-on experience. • 100+ hours of live training, • Practical skills in troubleshooting, networking (Cisco), Azure cloud, Splunk SIEM & Tenable vulnerability management Apply today and start your journey into networking. Course cost - £2795, or, £232.91 per month We guarantee you will be offered a job upon completion, or we will refund you 100% of your course fees.

Launch Your Network Engineer Career – Job Guaranteed! With Newto Training’s Network Engineer Career Programme, you’ll gain 4 top certifications (Azure Fundamentals, CompTIA Network+, uCisco CCNA, Forescout FSCA) plus real-world project work that doubles as hands-on experience. • 100+ hours of live training, • Practical skills in troubleshooting, networking (Cisco), Azure cloud, Splunk SIEM & Tenable vulnerability management Apply today and start your journey into networking. Course cost - £2795, or, £232.91 per month We guarantee you will be offered a job upon completion, or we will refund you 100% of your course fees.

Launch Your Network Engineer Career – Job Guaranteed! With Newto Training’s Network Engineer Career Programme, you’ll gain 4 top certifications (Azure Fundamentals, CompTIA Network+, uCisco CCNA, Forescout FSCA) plus real-world project work that doubles as hands-on experience. • 100+ hours of live training, • Practical skills in troubleshooting, networking (Cisco), Azure cloud, Splunk SIEM & Tenable vulnerability management Apply today and start your journey into networking. Course cost - £2795, or, £232.91 per month We guarantee you will be offered a job upon completion, or we will refund you 100% of your course fees.

Launch Your Network Engineer Career – Job Guaranteed! With Newto Training’s Network Engineer Career Programme, you’ll gain 4 top certifications (Azure Fundamentals, CompTIA Network+, uCisco CCNA, Forescout FSCA) plus real-world project work that doubles as hands-on experience. • 100+ hours of live training, • Practical skills in troubleshooting, networking (Cisco), Azure cloud, Splunk SIEM & Tenable vulnerability management Apply today and start your journey into networking. Course cost - £2795, or, £232.91 per month We guarantee you will be offered a job upon completion, or we will refund you 100% of your course fees.

Contractor Hardware Technician / Electronic Technician – Low & High Voltage, Electric Drive Systems Greater Norwich area Contract Opportunity - Outside IR35 2 months+, strong likelihood of further extensions as project is ongoing ARCA Resourcing is proud to partner with an innovative engineering organisation at the forefront of next-generation electric propulsion technology. We’re looking for an experienced Hardware Technician to support the build and development of advanced electric drive systems in a fast-paced R&D environment. This is a fantastic opportunity to get hands-on with cutting-edge prototype hardware that will help shape the future of mobility. What You’ll Be Doing: • Building, modifying, and maintaining prototype motors, inverters, wiring harnesses, and test boxes, • PCB assembly, soldering, rework, and fault finding, • Supporting prototype testing, data capture, and issue resolution, • Working closely with engineers to interpret drawings, BOMs, and design updates, • Maintaining a safe, organised, and fully operational engineering lab, • Managing tooling, calibration, stock, and consumables, • Ensuring accurate build documentation and configuration control, • Working safely with AC/DC systems up to 600V / 25kW, • Contributing to continuous improvement of lab processes and workflows What We’re Looking For: • Hands-on hardware build and assembly experience, • Strong fault-finding and troubleshooting skills, • Experience using multimeters, oscilloscopes, soldering equipment, and test tools, • Ability to read technical drawings and follow build instructions, • Excellent attention to detail and documentation standards, • Good understanding of ESD and electrical safety practices Contract Details: • Start: ASAP, • Duration: Initially up to 8 weeks (with likely extension), • Hours: Flexible / mutually agreed, • Based onsite Monday - Friday If you’re an experienced technician looking to work on genuinely exciting electric drive technology, we’d love to hear from you. Apply now or contact ARCA Resourcing for more information.

Launch Your Network Engineer Career – Job Guaranteed! With Newto Training’s Network Engineer Career Programme, you’ll gain 4 top certifications (Azure Fundamentals, CompTIA Network+, uCisco CCNA, Forescout FSCA) plus real-world project work that doubles as hands-on experience. • 100+ hours of live training, • Practical skills in troubleshooting, networking (Cisco), Azure cloud, Splunk SIEM & Tenable vulnerability management Apply today and start your journey into networking. Course cost - £2795, or, £232.91 per month We guarantee you will be offered a job upon completion, or we will refund you 100% of your course fees.

Launch Your Network Engineer Career – Job Guaranteed! With Newto Training’s Network Engineer Career Programme, you’ll gain 4 top certifications (Azure Fundamentals, CompTIA Network+, uCisco CCNA, Forescout FSCA) plus real-world project work that doubles as hands-on experience. • 100+ hours of live training, • Practical skills in troubleshooting, networking (Cisco), Azure cloud, Splunk SIEM & Tenable vulnerability management Apply today and start your journey into networking. Course cost - £2795, or, £232.91 per month We guarantee you will be offered a job upon completion, or we will refund you 100% of your course fees.

Launch Your Cyber Security Career – Job Guaranteed! Cyber attacks are rising, and companies need skilled professionals now more than ever. With Newto Training’s Cyber Security Career Programme, you’ll gain 4 top certifications (Azure Fundamentals, CompTIA Security+, CompTIA CySA+, Forescout FSCA) plus real-world project work that doubles as hands-on experience. 100+ hours of live training Practical skills in troubleshooting, networking (Cisco), Azure cloud, Splunk SIEM & Tenable vulnerability management Job guarantee with our hiring partners Get certified, get experience, get hired. Apply today and start your journey into cyber security. Course cost - £2995, or, £249.58 per month We guarantee you will be offered a job upon completion, or we will refund you 100% of your course fees.

Contract Test Technician – Dynometer, Dyno, experience Electric Drive Systems Greater Norwich area Contract Opportunity - Outside IR35 2 months at least, strong likelihood of further extensions as project is ongoing ARCA Resourcing is proud to partner with ETA on an exciting opportunity for an experienced Test Technician to support the development and validation of cutting-edge electric drive systems. This is a fantastic chance to work at the forefront of electric propulsion technology, operating advanced dynamometer facilities and supporting innovative engineering programmes shaping the future of mobility. What You’ll Be Doing: • Setting up and operating dynamometers, test rigs, and associated equipment, • Installing motors, inverters, gearboxes, and units under test, • Configuring sensors, instrumentation, and data acquisition systems, • Running performance, durability, efficiency, and validation testing, • Monitoring tests, identifying faults, and ensuring safe, repeatable execution, • Capturing, validating, and logging test data accurately, • Supporting engineers with analysis and reporting of results, • Maintaining and calibrating dynos, sensors, and test equipment, • Troubleshooting rig and equipment issues, • Helping improve test methods, fixtures, and facility capability, • Maintaining a safe, organised, and efficient test environment What We’re Looking For: • Experience operating test rigs for motors, inverters, or electric drive systems, • Strong electrical and electromechanical fault-finding skills, • Proficiency with oscilloscopes, multimeters, power analysers, DAQ systems, and insulation testers, • Good data handling and reporting skills, • Mechanical and electrical installation/maintenance experience, • Knowledge of HV safety, lockout/tagout, and safe systems of work, • Excellent attention to detail and documentation discipline Contract Details: • Start: May, • Duration: Initially up to 8 weeks (with possible extension) If you’re a skilled Test Technician looking to work on advanced electric propulsion technology within a high-performing engineering environment, we’d love to hear from you. Apply now or contact ARCA Resourcing for more information.

Our client is seeking an experienced and motivated Agricultural Service Technician to join their team. This role focuses on maintaining, servicing, and repairing modern agricultural machinery-particularly tractors-across Norwich and the surrounding Norfolk area. You'll work independently, travelling directly from home or the workshop to customer sites, supported by a well-established depot for parts collection and technical support. Role Overview • Diagnose, service, and repair agricultural tractors, including hydraulic, electrical, and mechanical systems., • Carry out computer-based diagnostics on modern machinery; equipment and software provided., • Travel to customer sites across Norfolk, typically starting the day from home., • Return to the depot as required to collect parts and prepare for upcoming jobs., • Participate in occasional on-call and weekend work due to the nature of the agricultural industry., • Ideally experience working on Case tractors (advantageous but not essential)., • Background in agricultural, plant, forklift, HGV, or similar mechanical engineering., • Strong knowledge in hydraulics, electrics, or mechanical systems., • Confident carrying out diagnostics, including computer-based troubleshooting., • Must be computer-literate due to the use of diagnostic software., • Full UK driving licence., • Ability to work independently and manage time efficiently., • Hourly rate £18-£22, dependent on experience., • Standard hours: Monday-Friday, 8:00am-5:00pm (42.5 hrs/week)., • 39 hours paid at basic rate; additional 5 hours built-in overtime at 1.5x., • Further overtime paid at time and a half., • Double time on Sundays., • £50 call-out fee for evenings, weekends, and unscheduled work., • Company van for work travel (not for personal use)., • Full technical training provided, including specialist brand systems., • Wide customer base across Norfolk, offering varied and rewarding daily work. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

Role Overview We are seeking a highly skilled Electrical / PLC Engineer to join our engineering and manufacturing team. This role is responsible for maintaining, troubleshooting, and improving automated production equipment, electrical systems, and PLC-controlled machinery. The successful candidate will ensure high levels of equipment reliability, deliver robust engineering solutions, and support continuous improvement initiatives across the site. Key Responsibilities Electrical Engineering • Perform routine maintenance, diagnostics, and repair of electrical systems, motors, drives, sensors, and control panels., • Lead electrical fault-finding activities to minimise downtime and maintain safe operational standards., • Ensure all electrical work complies with current regulations (e.g., BS7671) and internal safety standards., • Assist in the design, installation, and commissioning of new electrical equipment and upgrades., • Program, modify, and troubleshoot PLC systems, • Diagnose automation faults and implement sustainable fixes to prevent recurrence., • Support integration of SCADA, HMI, and machine control systems into manufacturing processes., • Optimise machine control logic to improve throughput, reliability, and safety., • Work closely with engineering, operations, and maintenance teams to implement improvements that increase efficiency and reduce downtime., • Identify and lead proactive engineering projects to improve reliability, energy efficiency, and machine performance., • Follow all site safety policies and promote a culture of safe working practices., • Conduct risk assessments for electrical and automation tasks., • Ensure all work aligns with relevant industry standards, safety legislation, and engineering best practice. Skills & Experience Required Essential • Time-served Electrical Engineer or equivalent NVQ Level 3 / HNC / HND in Electrical or Control Engineering., • Proven experience in an engineering or manufacturing environment., • Strong PLC fault-finding and program modification skills., • Solid understanding of industrial automation, sensors, control loops, and drives., • Ability to read and interpret electrical schematics and technical documentation., • Experience with electrical maintenance of production machinery., • Experience with SCADA, HMI design, or industrial networking., • Knowledge of robotics, servo systems, or pneumatic/hydraulic integration., • Experience within FMCG, automotive, food manufacturing, or heavy industry., • Competitive Salary, • 31 days holiday (increasing with service within 2 years), plus an additional paid day for your birthday with the option to buy more holiday via salary sacrifice, • Pension – with up to 4 x salary & income protection, with the option to potentially save on tax and National Insurance via our salary sacrifice arrangement, • Comprehensive health & well-being benefits including access to in-house occupational health & well-being resources, discounted gym memberships, employee assistance programme, & mental health resources, • Heavily discounted group discount scheme on all products, • Salary sacrifice benefits – enjoy perks such as pension, cycle to work, electric car purchase, and additional annual leave, while potentially reducing your tax and NI contributions

R13 Recruitment are supporting an innovative and growing technology organisation in their search for a Service Desk Analyst to join their client support team. This is an excellent opportunity for someone looking to develop their career within software and technology support, joining a collaborative environment where customer service and problem-solving are at the heart of everything they do. Supporting a specialist software platform, you will play a key role in delivering a high-quality experience to clients while developing valuable technical and client-servicing skills. Full-time, Monday to Friday hours with hybrid working available. Full product training will be provided, making this a fantastic opportunity for someone who is passionate about technology and customer support and wants to build a long-term career within a growing IT business. The Company This forward-thinking technology business develops and delivers specialist software solutions to their clients. With a strong focus on innovation, collaboration and client success, they offer excellent long-term development opportunities within a supportive and people-focused working environment. Benefits • Hybrid working opportunities ( flexibility for 4 days from home / 1 day in office ), • Pension scheme, • Ongoing training and development, • Clear career progression opportunities, • Supportive and collaborative team environment, • Providing first-line remote support to software users and clients., • Logging and managing incidents and service requests via the ticketing system., • Investigating and troubleshooting technical issues using internal and external resources., • Prioritising support tickets based on urgency and impact., • Escalating more complex issues to specialist teams where required., • Maintaining accurate documentation and updating records clearly and consistently., • Providing timely updates to clients and internal stakeholders., • Supporting user onboarding/offboarding and access management processes., • Assisting with password resets, account amendments and user administration., • Contributing to knowledge base documentation and process improvements., • Previous experience within a customer service, service desk or helpdesk position., • Excellent communication skills, both written and verbal., • Strong customer service and relationship-building abilities., • Good IT literacy, including Office 365., • Strong organisational skills and attention to detail., • Ability to prioritise workload and manage multiple tasks effectively., • A proactive and positive approach to problem-solving. To hear more details about this fantastic opportunity, please email your CV to Rebecca Headden – Business Partner at R13 Recruitment. If you do not hear from us within 5 working days upon initial submission of your CV, please assume you have been unsuccessful on this occasion.

Systems Analyst (ERP / Application Support) Location: Norwich (Hybrid, 3 days minimum on site)Salary: £ REED Technology are supporting a well-established organisation in their search for a Systems Analyst to join their Finance Systems team. This is a fantastic opportunity for someone with strong ERP application support experience to take ownership of a core business system, supporting users, resolving issues, and contributing to ongoing system development and improvement. The role is centred around Dynamics 365 (Finance & Operations), but experience with other large-scale ERP systems will also be considered. Key Responsibilities • Provide 2nd / 3rd line support for a core ERP system (Dynamics 365 F&O), • Act as a key point of contact between end users, internal IT teams, and external support partners, • Investigate and resolve system issues, carrying out root cause analysis to prevent recurrence, • Manage and prioritise a queue of support tickets (approx. 10–15 per day), • Carry out system configuration tasks (e.g. user setup, dimension changes), • Support system upgrades, testing, and releases, • Work proactively with the business to identify training needs and recurring issues, • Assist in the development of reports and system documentation, • Proven experience in application or systems support (2nd line or above), • Experience supporting a large ERP system (e.g. Dynamics 365, NetSuite, SAP, Oracle), • Strong troubleshooting and analytical skills with a focus on root cause resolution, • Ability to manage and prioritise multiple support requests, • Experience working in a user-facing support environment, • Experience with Microsoft Dynamics 365 Finance & Operations, • Exposure to Azure integration services or system integrations, • Understanding of database structures or data flows

Contract Test Technician - Dyno / Motor Testing Location: Norwich, Norfolk Rate: Up to £55 per hour, outside IR35 We're looking for an experienced Test Technician to join a specialist electronics engineering client of ours in Norwich on an urgent contract basis. This role is centred around dynamometer (dyno) testing of electric motors and drive systems, working hands-on in a fast-paced test environment alongside a skilled engineering team. The Role You'll be responsible for setting up and executing rotational dyno tests, configuring motors and test equipment, operating data acquisition systems, and capturing and validating test data to engineering standards. You'll also play an active role in troubleshooting and debug activities on dyno systems, working closely with engineers throughout. What We're Looking For Previous dyno or test rig experience is strongly preferred, alongside an electrical or electronics bias. We're open to candidates from a range of sectors. Relevant experience could come from: • Automotive test & development, • Marine propulsion or naval systems, • Rail engineering, • Industrial motors or drives, • Wind turbines or rotating machinery You should be practical, methodical and comfortable working with a degree of autonomy in a technical environment. • Up to £55 per hour, Outside IR35, • 3 month initial contract with strong potential to extend, • Overtime available, • Fully onsite in Norwich, Norfolk, • One stage Teams interview, available at short notice

About Evolve Psychology At Evolve Psychology, we do things differently. Founded in 2014 by Dr Laura Powling, Evolve Psychology began with a bold aim to redefine what clinical and forensic psychology means in practice. Laura’s vision was simple yet powerful, to bring care, connection, empathy and clinical excellence together, with no compromise. What started as a small practice delivering expert witness and neurodevelopmental assessments has blossomed into a national independent psychology service. We earned our first NHS contract in 2021, launched satellite clinics to streamline access, and rolled out neurodevelopmental services to families across the UK. We are clinician‑founded and clinician‑led, proudly registered with HCPC and affiliated with the British Psychological Society and the Royal College of Speech & Language Therapists. We’re also award-winning, a testament to the dedication and quality of our multidisciplinary team of over 100 experts. What sets Evolve Psychology apart? • Founded and led by Dr Laura Powling, a Consultant Clinical Psychologist with 18+ years’ experience across NHS, forensic, and neurodevelopmental services, bringing deep clinical insight and hands-on leadership to everything we do., • We specialise in autism, ADHD, dyslexia and dyscalculia assessments for children, young people and adults offering a high-quality, person-centred service backed by NHS contracts and available via Right to Choose across the UK., • We prioritise clinical quality and real impact, not speed or scale at the expense of care. Our assessments are evidence-based, multidisciplinary, and designed to support the whole person, not just produce a diagnosis., • We offer more than assessment work. Our clinicians can contribute to the Evolve Skills & Research Academy, developing training, shaping neuroinclusive content, or collaborating on research, all part of our broader mission to raise awareness and improve support for neurodivergent individuals, educational institutions and workplaces., • We have a strong, values-led culture. Compassion, clarity, and integrity guide everything we do, from our team interactions to the way we support families., • We’re growing sustainably, with purpose. With clinics across the UK and Ireland, a growing digital presence, and a multidisciplinary team of 100+ experts, Evolve is expanding with care, always keeping quality at the centre. The role At Evolve Psychology Services, we equip our clinicians with cutting-edge tools and support to help them focus on what matters most: delivering exceptional care to children, young people and their families. You’ll join a passionate and supportive multidisciplinary team dedicated to making a meaningful difference in the lives of children and young people. Our service specialises in high-quality, evidence-based assessments for autism and ADHD, delivered through both NHS-funded referrals and private pathways. As a Specialist Neurodevelopmental Practitioner, you’ll contribute to comprehensive neurodevelopmental assessments, helping ensure timely, accurate diagnoses that lead to appropriate support and improved outcomes for families. You will be responsible for: • Conducting face-to-face structured observations as part of the neurodevelopmental assessment process., • Conducting remote developmental history interviews with parents and carers via Zoom, • Participating collaboratively in peer MDT diagnostic discussions, supported by senior clinicians where needed, • Delivering clear, compassionate feedback to families, • Producing accurate clinical reports, including diagnostic formulations, with the help of our smart tools, • Working efficiently to meet service Key Performance Indicatiors (KPIs), • Delivering clinical supervision (where applicable), • Able to travel to a clinic base to conduct in-person assessments, (hybrid only) Our Ways of Working: • Digital workflows and smart report-writing reduce admin time and enhance clinical impact., • A custom-built electronic health record system, developed in-house using market leading research, • Continuously enhancing internal systems, based on employee feedback to improve efficiency, • Ongoing training and onboarding to ensure confidence in all tech and systems, • In-house IT and operational support, so you're never left troubleshooting alone Qualifications and experience • Minimum of 1 years' professional registration with one of the following regulatory bodies: HCPC, NMC, GMC or Social Work England. Such as:, • HCPC – Clinical Psychologist, Counselling Psychologist, Educational Psychologist, Speech and Language Therapist, Occupational Therapist, • NMC – Mental Health Nurse, Learning Disability Nurse, General Nurse, Children’s Nurse, • GMC – Medical Practitioners, • Social Work England – Social Worker, • Minimum of 1 years’ experience conducting diagnostic assessments for autism and/or ADHD in children and young people, • Strong understanding of differential diagnosis in neurodevelopmental presentations, • In-depth knowledge of DSM-5 diagnostic criteria for autism and ADHD, • Trained and experienced in the use of diagnostic tools such as ADOS-2, ADI-R, etc, • Effective time management and caseload organisation skills, with the ability to manage competing demands and meet clinical deadlines, • Ability to work effectively within a multidisciplinary team and participate in collaborative diagnostic discussions., • Highly developed written language skills used to produce high-quality clinical reports, • Well-developed communication skills with children, young people, and their families, ensuring compassionate, clear, and professional interactions throughout the assessment process, • Must be eligible to work in the UK Why work with Evolve? Be part of a supportive, purpose-driven team dedicated to transforming neurodevelopmental care across the UK. At Evolve, we offer: • A values-led culture where clinical excellence, compassion, and staff wellbeing come first., • Continued professional development, clinical supervision, and reflective practice to support the ongoing development of your clinical skills., • Competitive salary based on experience, with annual salary reviews and pension contributions., • Generous leave entitlement, including 28 days annual leave plus bank holidays - and a day off for your birthday., • Private healthcare to support your physical and mental health., • A company laptop and on-call IT support to enable seamless remote working., • Opportunities to contribute beyond clinical work through the Evolve Skills & Research Academy, including training and research., • Company events, • Access to a collaborative, multidisciplinary team passionate about improving outcomes for neurodivergent individuals and their families.

Rubicon Consulting is currently recruiting for an Advance operations coordinator on a 9 month contract, located in East Anglia Role Summary · Meticulous administration of Client wind farm sites including technical and commercial record-keeping and clear separation of costs between service and warranty activities in line with the customer contract · Raise, schedule and allocate planned and unplanned maintenance activities in conjunction with Client field staff and customer personnel via SAP system · Maintain efficient timescales for planned maintenance activities and create daily and weekly plans for site team as required, optimizing the deployment of Crew Transfer Vessels (CTVs) · Control and technical verification within SAP systems; collation of time data and parts consumption to allow billing and parts replenishment to be initiated · Ensure maintenance and troubleshooting activities are aligned to business objectives and customer requirements · Co-ordinate the preparation/provision of Health, Safety and Environment (HSE) related documentation and ensure all work is carried out in line with UK legislation · Co-ordinate record keeping, reporting and documentation archives to support full service and maintenance history Skills · Computer skills essential · SAP knowledge preferable but not essential · Excel skills · Good communication skills. Our Company Rubic...

Monitor and maintain network performance, connectivity, and security, troubleshooting i. This is a highly hands-on position where you will take ownership of all things IT - from maintaining day-to-day systems and providing internal support, through to developing and implementing new digital solution

Electrical Engineer (PLC Specialist) Norfolk | £50,000 | 🕒 37.5 hours (Early Finish Fridays) We’re recruiting for an Electrical Engineer with strong PLC experience to join a well-established international manufacturing business based in Diss. This is a hands-on, autonomous role focused on fault finding, troubleshooting, and supporting complex electrical and control system issues across a live production environment. The Role You’ll act as the go-to escalation point for medium to high-level electrical and electronic faults, particularly where issues go beyond obvious breakdowns. The role involves regular hands-on support to breakdowns, with a strong emphasis on root cause analysis and long-term solutions. You’ll be heavily involved with PLCs, drives, and control systems, working across both legacy and modern equipment. Key Responsibilities * Advanced electrical and electronic fault finding (PLCs, drives, sensors) * PLC and drive programming/modifications (modification experience considered) * Supporting breakdowns and improving system reliability * Obsolescence reviews and component upgrades * Delivering small automation projects (panel rewires, upgrades, energy initiatives) * Supporting larger upgrade projects, including PLC migrations (e.g. S5 to S7) * Working closely with OEMs, while remaining hands-on and self-sufficient Hours & Package * 37.5 hours per week (ty...

Contract Test Technician - Dyno / Motor Testing Norwich, Norfolk | 3 month Contract (likely extension) | Up to £55ph, outside IR35 | Overtime Available | Start ASAP The Role A specialist electronics engineering client of ours is looking for an experienced Test Technician to join their team on an urgent contract basis. You'll be at the heart of their motor testing operation - setting up and running dynamometer tests on electronic / electric drive systems and motors, working closely with engineers to ensure accurate, reliable results. This is a hands-on role with real variety: from configuring test rigs and motors through to monitoring data acquisition systems, validating outputs and supporting troubleshooting on upgraded dyno platforms. If you're someone who takes pride in doing things properly and can hit the ground running in a technical environment, this is worth a look. What You'll Be Doing • Setting up and executing rotational dynamometer (dyno) tests on electric motors and drive systems, • Configuring motors, test rigs and associated equipment ahead of test runs, • Operating and monitoring data acquisition systems throughout testing, • Capturing, recording and validating test data to engineering standards, • Supporting fault-finding and debug activities on dyno systems, • Collaborating with engineers across all stages of te...

You will ideally have completed a mechanical apprenticeship, NVQ, HNC, or equivalent with strong mechanical troubleshooting skills. We have an exciting new opportunity for a Mechanical Technician for a well-known manufacturer based in Norwich. You will ensure that pumps, valves, mixers, reactors, an

Offshore Instrument Technician – UK North Sea Opportunity Are you ready to elevate your career as an Offshore Instrument Technician with a leading player in the Oil & Gas sector? Our client a major operator in the UK North Sea, is seeking skilled and safety-focused Instrument Technicians to join their offshore teams. This vital role offers the chance to work on cutting-edge offshore processing facilities, ensuring the smooth operation and maintenance of critical instrumentation systems that keep gas production running efficiently and safely. As part of a multidisciplinary team, you will perform preventative maintenance, troubleshooting, and testing on a range of instrumentation equipment including safety shutdown valves, extinguishant and fire & gas detection systems, level and pressure measurement devices, nucleonic instruments, and safety instrumented systems. Your contributions will directly impact plant availability and operational excellence in one of the world’s most dynamic offshore environments. Required Skills: Strong expertise in maintenance, testing, and operation of offshore instrumentation systems COMPEX Proven ability to safely manage Shutdown/Blowdown valves, Fire & Gas systems, and Extinguishant systems Experience with Fixed and Portable Flammable and Toxic Gas Detectors Skilled in maintenance of level, pressure, and temperature measurement equipment Competence in handling Nucleonic devices in compl...

37 hours per week, 52 weeks per year £25,255 - £29,856 per annum We have an excellent opportunity for an IT Field Support Technician to join City College Norwich, based primarily at our Paston College campus in North Walsham. Working as part of a large and diverse IT support team across three campuses, you will be the first point of contact for staff and students at Paston, delivering responsive, friendly first- and second-line IT support that keeps the college running smoothly day to day. You should have experience across a range of IT support disciplines, including hardware troubleshooting, device configuration, and network connectivity, with a confident, calm approach to problem-solving in a busy educational environment. A strong communicator with a customer-focused mindset, you will be comfortable working independently on site while staying closely connected to the wider helpdesk team. You will be competent in the use of Microsoft operating systems and applications, with a strong working knowledge of desktop and laptop hardware, printers, mobile devices, and classroom technologies. Experience with service desk software, or in an education setting, would be an advantage. Most importantly, you will bring a willingness to learn and a genuine passion for great IT support. If you are personable, technically capable, and ready to be part of a friendly and supportive team, we would love to hear from you. To apply please visit our website by clicking on the 'apply on company website' button. Closing date for applications: Wednesday 20 May 2026 at Midnight Interviews to be held on Wednesday 27 May 2026 As a College we are required to undertake various Safer Recruitment checks as set out within the guidance from the Department for Education Keeping Child Safe in Education. We require all staff to undertake an enhanced Adult and Child Workforce DBS Check and to register with the DBS Update Service. Please note: From 28 November 2020 the government implemented changes to the filtering rules, and we have been instructed that we cannot accept any update service checks on DBS certificates that have been issued before this date. Therefore, a new one must be completed with City College Norwich.

We are seeking a proactive and detail-oriented HR Assistant to support the team whilst they have the implementation of a new HR system. This is a temporary role initially for 6 months but could be extended. The ideal for someone with strong administrative skills, excellent communication, and a keen interest in HR processes and technology. This role can be full or part time. Key Responsibilities: • Assist with the rollout of the new HR system, including data migration, testing, and user acceptance activities., • Maintain accurate employee records and ensure data integrity during system transition., • Data entry/ updating the HR Database and scanning of documents, • Providing Data for Payroll, • Respond to initial HR Queries, • Triaging and responding to the HR Email Inbox, • Provide administrative support to the HR team, including document preparation, filing, and updating HR databases., • Act as a first point of contact for employee queries related to the new system, offering guidance and troubleshooting support., • Coordinate training sessions for staff on the new HR system and prepare user guides or FAQs., • Liaise with internal stakeholders and external vendors to ensure smooth implementation and resolve any issues promptly.

Electrical Supervisor £60,000 Basic + Overtime + Bonus + Van + Fuel Card Monday - Friday - 8am - 4pm About the Role: In this role, you’ll take ownership of on-site electrical teams delivering solar PV and battery storage installations. Beyond day-to-day supervision, you’ll help shape a positive team environment, uphold strict safety standards, and contribute to improving how projects are delivered. What You’ll Be Doing * Managing and supporting site-based electrical personnel, including qualified electricians, trainees, and subcontract partners * Championing safe working practices and ensuring adherence to all relevant legislation and internal procedures * Overseeing installation, inspection, testing, and commissioning of solar and battery systems * Carrying out site audits, risk assessments, and quality control checks * Spotting opportunities to streamline processes and improve efficiency on-site * Feeding back insights from completed projects to strengthen future delivery * Troubleshooting and resolving technical electrical issues when they arise * Tracking labour and material usage to support cost management * Collaborating with project teams to keep delivery aligned with timelines and budgets Skills & Qualifications * Demonstrated experience supervising electrical installations or teams * Practical experience with solar PV and/or battery storage syst...

We're looking for a Third Line Support Engineer to support and maintain mission-critical systems across cloud, on-premise, and front-end environments. This is a hands-on role focused on resolving complex issues, maintaining system performance, and contributing to continuous improvement within a 24/7 service environment. You will be an experienced third line engineer who thrives on solving complex technical problems. You take ownership of escalations, work confidently across multiple platforms, and communicate effectively with both technical and non-technical stakeholders. Key Requirements • 3-5 years' experience in a third-line IT support role, • Strong programming knowledge (JavaScript, Python, React, Node), • Good working knowledge of Linux and AWS, • Experience with AWS Lambda and/or Bash scripting, • Familiarity with API management tools, • Strong understanding of ITIL frameworks, • Proven troubleshooting and problem-solving skills, • Excellent communication and customer service skills, • Ability to work independently and manage multiple priorities, • Experience with Technology Enabled Care Services (TECS) or SmartTEC systems, • AWS and/or relevant technical certifications (e.g. ITIL, CompTIA, CCNP), • Hands-on use of Wireshark, SIP traces, or packet analysis tools, • Understanding of VoIP...

Your new company We have an exciting new opportunity for a Mechanical Technician for a well-known manufacturer based in Norwich. What you'll need to succeed You will ideally have completed a mechanical apprenticeship, NVQ, HNC, or equivalent with strong mechanical troubleshooting skills. Repo

Our client is seeking an experienced and motivated Agricultural Service Technician to join their team. This role focuses on maintaining, servicing, and repairing modern agricultural machinery-particularly tractors-across Norwich and the surrounding Norfolk area. You'll work independently, travelling directly from home or the workshop to customer sites, supported by a well-established depot for parts collection and technical support. Role Overview Diagnose, service, and repair agricultural tractors, including hydraulic, electrical, and mechanical systems. Carry out computer-based diagnostics on modern machinery; equipment and software provided. Travel to customer sites across Norfolk, typically starting the day from home. Return to the depot as required to collect parts and prepare for upcoming jobs. Participate in occasional on-call and weekend work due to the nature of the agricultural industry. Maintain high standards of customer service, professionalism, and accuracy in reporting.Requirements Ideally experience working on Case tractors (advantageous but not essential). Background in agricultural, plant, forklift, HGV, or similar mechanical engineering. Strong knowledge in hydraulics, electrics, or mechanical systems. Confident carrying out diagnostics, including computer-based troubleshooting. Must be computer-literate due to the use of diagnostic software. Full UK driving licence. Ability to work independently and mana...

Hardware Technician – Electric Drive Systems - Norfolk - Contract (Outside IR35) Role: Hardware Technician Location: Norfolk (On Site 5 Days Per Week) Contract: Outside IR35 Duration: 8 Weeks (Will extend or option to go permanent) Rate: £DOE We are supporting an advanced engineering business developing next-generation electric drive systems for high-performance and clean technology applications. They are looking for a hands-on Hardware Technician to support prototype builds, hardware modifications, and engineering test activities within a fast-paced R&D environment. This is an excellent opportunity for someone who enjoys practical engineering work, prototype development, and working closely with multidisciplinary engineering teams on cutting-edge electrification technology. The Role You will take ownership of prototype hardware assembly, PCB rework, wiring harness manufacture, lab maintenance, and test support activities. Working alongside hardware and systems engineers, you will help ensure development programmes progress efficiently, safely, and to a high technical standard. The role will suit someone with strong practical electronics and hardware experience who is comfortable working in a dynamic engineering environment. Key Responsibilities - Assemble, integrate, and modify electric drive system prototypes including motors, inverters, and associated hardware - Support engineering changes and prototype iterations - Build prototype wiring harnesses and test boxes - Carry out PCB assembly, soldering, rework, and modifications - Troubleshoot hardware and PCB-related issues alongside engineering teams - Maintain the engineering lab, tools, equipment, and test rigs - Support calibration scheduling and inventory management - Assist with functional, validation, and performance testing - Maintain accurate build and configuration records - Ensure all work is carried out safely and in line with engineering and quality standards - Support rapid development cycles and continuous improvement activities Experience & Skills Required - Experience assembling and configuring electronic or electromechanical hardware - Strong hands-on fault-finding and troubleshooting capability - PCB soldering and rework experience - Ability to read and work from technical drawings, schematics, and BOMs - Familiarity with lab and diagnostic equipment such as multimeters and oscilloscopes - Experience supporting prototype or development environments - Understanding of safe working practices including ESD procedures - Comfortable working with high-voltage systems and test environments Contract Details - Initial 8-week contract - Outside IR35 - Day rate DOE - Potential for extension or permanent opportunity - Immediate/short-notice start preferred If this is of interest please apply on LinkedIn or email

A machinery services provider in Norwich is seeking a skilled Mobile Plant Fitter to maintain and repair various plant machinery. Responsibilities include troubleshooting, maintenance, and excellent customer service.

We're looking for a Third Line Support Engineer to support and maintain mission-critical systems across cloud, on-premise, and front-end environments. This is a hands-on role focused on resolving complex issues, maintaining system performance, and contributing to continuous improvement within a 24/7 service environment. You will be an experienced third line engineer who thrives on solving complex technical problems. You take ownership of escalations, work confidently across multiple platforms, and communicate effectively with both technical and non-technical stakeholders. Key Requirements 3-5 years' experience in a third-line IT support role Strong programming knowledge (JavaScript, Python, React, Node) Good working knowledge of Linux and AWS Experience with AWS Lambda and/or Bash scripting Familiarity with API management tools Strong understanding of ITIL frameworks Proven troubleshooting and problem-solving skills Excellent communication and customer service skills Ability to work independently and manage multiple priorities Full UK driving licence Desirable: Experience with Technology Enabled Care Services (TECS) or SmartTEC systems AWS and/or relevant technical certifications (e.g. ITIL, CompTIA, CCNP) Hands-on use of Wireshark, SIP traces, or packet analysis tools Understanding of VoIP/SIP, TCP/IP, DNS, DHCP, VLANs, and firewall configurations Experience with telecare platforms, IoT systems, or digital alarm receivers Background in customer-facing technical roles Passion for innovation, automation, and continuous improvement You'll act as the escalation point for complex incidents, supporting Tier 1 and Tier 2 teams while leading third-line support activities. You'll diagnose and resolve high-impact issues, perform root cause analysis, and help prevent recurring problems. You'll work across cloud and on-prem environments, supporting infrastructure, applications, and integrations. The role also involves contributing to system improvements, supporting deployments, and ensuring service continuity. If you're a skilled Third Line Support Engineer looking to work on complex systems and make a real impact, we'd encourage you to apply. Spectrum IT Recruitment (South) Limited is acting as an Employment Agency in relation to this vacancy. TPBN1_UKTJ

Design Engineer Technique Recruitment Solutions are a specialist Engineering & Manufacturing recruitment company based in Norfolk, we are working with a local client who design and manufacture bespoke products predominantly for the power industry. Due to growth they are looking for a driven design engineer to join their dynamic CAD department. The successful candidate will have experience with design of rotating machinery or parts Job Overview Working with SolidWorks to implement electrical and mechanical design specifications into detailed manufacturing drawings for production. This could be for complete machines or individual components. Liaising with production to see projects through the manufacture process and onward to customer delivery. Producing 3D models to be used for analysis in Ansys. Responsibilities and Duties Production of accurate manufacturing drawings. Production of full assembly drawings & parts lists from manufacturing drawings using SolidWorks PDM Modifications and revision of design drawings. Ability to understand engineering materials, properties & manufacturing processes of these materials. Aid production with troubleshooting and design improvements. Qualifications/Experience The successful candidate Minimum of HND or equivalent in mechanical engineering or related subjects. Experience in drawing office methods & practices combined with good factory floor knowledge of machining & assembly processes. Good all round knowledge of 2D/3D CAD systems as well as Microsoft Office. Experience with SolidWorks / SolidWorks PDM or similar CAD software. Ability to work as part of a strong team, as well as making informed decisions when working alone at site, either in the UK or abroad. Certifications of any training, in house or otherwise, would be advantageous. Full driving license & current passport would be a distinct advantage. Technique-Recruitment Solutions Ltd is a proud equal opportunities employer, dedicated and specialist to the engineering and manufacturing industries. We work and support some of the most well-known companies in Norfolk and Suffolk. These vacancies are being advertised on behalf of Technique-Recruitment Solutions Ltd who are operating as an employment business and employment agency

Contract Test Technician - Dyno / Motor Testing Norwich, Norfolk | 3 month Contract (likely extension) | Up to £55ph, outside IR35 | Overtime Available | Start ASAP The Role A specialist electronics engineering client of ours is looking for an experienced Test Technician to join their team on an urgent contract basis. You'll be at the heart of their motor testing operation - setting up and running dynamometer tests on electronic / electric drive systems and motors, working closely with engineers to ensure accurate, reliable results. This is a hands-on role with real variety: from configuring test rigs and motors through to monitoring data acquisition systems, validating outputs and supporting troubleshooting on upgraded dyno platforms. If you're someone who takes pride in doing things properly and can hit the ground running in a technical environment, this is worth a look. What You'll Be Doing Setting up and executing rotational dynamometer (dyno) tests on electric motors and drive systems Configuring motors, test rigs and associated equipment ahead of test runs Operating and monitoring data acquisition systems throughout testing Capturing, recording and validating test data to engineering standards Supporting fault-finding and debug activities on dyno systems Collaborating with engineers across all stages of test execution What We're Looking For Previous dyno or test rig experience is strongly preferred, alongside an electrical or electronics bias. We're open to backgrounds across a range of sectors. Any of the following would be relevant: Automotive test & development Marine propulsion or naval systems Rail engineering Industrial motors or drives Wind turbines or other rotating machinery You should be practical, methodical and comfortable working in a fast-paced test environment with a degree of autonomy. Up to £55 per hour Outside IR35 3 month initial contract. Strong potential to extend or transition long-term Overtime available One-stage Teams interview TPBN1_UKTJ

Overview We are seeking a hands-on, detail-oriented Contract Test Technician to support the development and validation of electric drive systems in an engineering environment. This role plays a key part in ensuring products meet performance, safety, and reliability standards through structured testing and data-driven validation. The ideal candidate will have experience working with test rigs and instrumentation, with a strong focus on accuracy, safety, and troubleshooting in a fast-paced development setting. Schedule Shift: To be arranged Hours: Flexible based on project requirements Duration: Initial 8-week contract (potential extension) Key Responsibilities Set up dynamometers, test rigs, and supporting equipment for electric drive system testing Install units under test including motors, gearboxes, inverters, and associated components Configure sensors, instrumentation, and data acquisition systems Prepare and execute tests in line with defined procedures and Design Verification Plans (DVP) Ensure all equipment is calibrated and safe prior to testing Run performance, durability, and validation tests using dynamometer systems Monitor tests and identify abnormal behavior or faults during operation Record and log test data using data acquisition systems Perform basic validation checks to ensure accuracy and repeatability of data Support engineers in analyzing results and documenting test outcomes Assist with calibration of sensors and instrumentation Carry out routine maintenance of test rigs and equipment Troubleshoot mechanical and electrical issues related to test setups Support continuous improvement of test methods, equipment, and processes Maintain a clean, safe, and organized test environment Qualifications Experience setting up and operating test rigs for electric motors, inverters, or drive systems Strong troubleshooting skills for electrical and electromechanical systems Proficiency with test and measurement equipment (oscilloscopes, multimeters, power analyzers) Experience using data acquisition systems and recording test data Ability to perform mechanical and electrical installation and maintenance tasks Understanding of high-voltage safety practices and electrical standards Ability to follow detailed test procedures and maintain accurate documentation Experience working in an engineering or development environment preferred Core Competencies Strong attention to detail and technical accuracy Problem-solving and diagnostic capability Hands-on, practical approach to testing and validation Ability to work independently and within a team Strong communication and documentation skills Commitment to safety and quality standards Equipment & Technologies Dynamometers and test rigs Data acquisition and analysis systems Electrical test equipment (oscilloscopes, multimeters, power analyzers) Sensors and instrumentation systems High-voltage electrical systems and safety equipment

R13 Recruitment are supporting an innovative and growing technology organisation in their search for a Service Desk Analyst to join their client support team. This is an excellent opportunity for someone looking to develop their career within software and technology support, joining a collaborative environment where customer service and problem-solving are at the heart of everything they do. Supporting a specialist software platform, you will play a key role in delivering a high-quality experience to clients while developing valuable technical and client-servicing skills. Full-time, Monday to Friday hours with hybrid working available. Full product training will be provided, making this a fantastic opportunity for someone who is passionate about technology and customer support and wants to build a long-term career within a growing IT business. The Company This forward-thinking technology business develops and delivers specialist software solutions to their clients. With a strong focus on innovation, collaboration and client success, they offer excellent long-term development opportunities within a supportive and people-focused working environment. Benefits • Hybrid working opportunities ( flexibility for 4 days from home / 1 day in office ), • Pension scheme, • Ongoing training and development, • Clear career progression opportunities, • Supportive and collaborative team environment, • Exposure to cutting-edge technologies and projects The Day to Day • Providing first-line remote support to software users and clients., • Logging and managing incidents and service requests via the ticketing system., • Investigating and troubleshooting technical issues using internal and external resources., • Prioritising support tickets based on urgency and impact., • Escalating more complex issues to specialist teams where required., • Maintaining accurate documentation and updating records clearly and consistently., • Providing timely updates to clients and internal stakeholders., • Supporting user onboarding/offboarding and access management processes., • Assisting with password resets, account amendments and user administration., • Contributing to knowledge base documentation and process improvements., • Ensuring compliance with internal security and operational procedures. You Will Have / Be • Previous experience within a customer service, service desk or helpdesk position., • Excellent communication skills, both written and verbal., • Strong customer service and relationship-building abilities., • Good IT literacy, including Office 365., • Strong organisational skills and attention to detail., • Ability to prioritise workload and manage multiple tasks effectively., • A proactive and positive approach to problem-solving., • Comfortable working in a fast-paced and evolving environment. How to Apply To hear more details about this fantastic opportunity, please email your CV to Rebecca Headden – Business Partner at R13 Recruitment. If you do not hear from us within 5 working days upon initial submission of your CV, please assume you have been unsuccessful on this occasion

Overview We are seeking a hands-on and detail-oriented Contract Hardware Technician to support the development and testing of electric drive systems within an engineering environment. This role is responsible for assembling prototypes, implementing hardware modifications, and maintaining lab operations to support efficient product development and validation. The ideal candidate will have strong technical skills, experience working with electronic hardware, and the ability to troubleshoot and support engineering teams in a fast-paced development setting. Schedule Shift: To be arranged Hours: Flexible based on project requirements Duration: Initial 8-week contract (potential extension) Key Responsibilities Assemble, integrate, and modify electric drive system prototypes including motors, inverters, and associated components Interpret technical drawings, BOMs, and engineering instructions to support builds Ensure prototype hardware is correctly configured, functional, and safe for operation Perform PCB assembly, rework, and modifications to support development activities Ensure soldering, wiring, and component placement meet quality standards Manufacture prototype wiring harnesses and test boxes for validation activities Maintain and organize the hardware lab, ensuring tools and equipment are in working order Track inventory and consumables to support ongoing engineering projects Schedule and perform calibration of lab equipment and instruments Maintain accurate documentation of builds, modifications, and configuration changes Support hardware testing, including setup, monitoring, and data capture Assist with functional, performance, and validation testing of prototypes Identify and report faults, anomalies, and performance issues during testing Ensure safe handling of high-voltage systems (up to 600V / 25kW) Collaborate with hardware, software, and systems teams to support project delivery Support rapid prototyping cycles and continuous product improvement Recommend improvements to lab processes, tools, and workflows Promote safe working practices and maintain compliance with engineering standards Qualifications Experience assembling and configuring electronic or electromechanical hardware Ability to read and interpret technical drawings and specifications Strong troubleshooting skills using test equipment and diagnostic tools Experience with PCB assembly, soldering, and rework techniques Familiarity with lab instruments such as multimeters and oscilloscopes Understanding of electrical safety standards and ESD procedures Ability to maintain accurate technical documentation and records Strong organizational and time management skills Experience working in an engineering or development environment preferred Core Competencies Strong attention to detail and technical accuracy Problem-solving and diagnostic capability Hands-on, practical approach to engineering tasks Ability to work independently and within a team Strong communication and collaboration skills Commitment to safety and quality standards Equipment & Technologies Multimeters, oscilloscopes, and diagnostic tools Soldering and PCB rework equipment Electrical and electronic test systems Prototype wiring and harness tools Engineering lab equipment and calibration tools

Hours of work: 39 hours per week Reporting to: Electrical Manager Pay: £28,363.76-£45,878.46 a year All applicants are required to have the right to work in the UK. Job Description: We are seeking a skilled commercial electrician to play a crucial role in the installation, maintenance and repair of solar photovoltaic (PV) systems. You will have a strong background in commercial and utilities electrical work, a passion for renewable energy and a commitment to safety. RenEnergy are at the forefront of the renewable energy revolution. As a dynamic rapidly growing innovator we envision a world powered by clean energy and work tirelessly to turn that vision into reality. As we continue to grow and expand our operations, we are seeking an experienced Electrician to join our installations team. Key responsibilities include: Install solar PV systems, including panels, inverters and battery storage units in line with technical design specifications and according to industry standards and regulations. Ensure all installations comply with UK electrical standard, IET wiring regulations and H&S standards. Maintain up to date knowledge on industry technologies and legislation. Continuous monitoring to maintain excellent levels of H&S on site. Communicate effectively with clients regarding project timelines, system performance and maintenance needs. Provide technical support and guidance to clients, ensuring a positive customer experience. Prepare and maintain detailed reports and documentation for installations, maintenance and repairs including compliance checks. Assist with the completion of necessary paperwork for permits and grid connection applications. About you: We are looking for the following skills, knowledge and experience: NVQ Level 3 in Electrical Installation. 17th/18th Edition IET Wiring Regulations Certificate Experience in Solar PV installation desirable. Strong understanding of commercial and utilities electrical systems and safety protocols. Excellent troubleshooting and problem solving abilities. Ability to work independently or as part of a team. Excellent organisational and communication skills are essential. Physical fitness and ability to work at heights. Must have a full, clean UK Drivers Licence. Must have a ECS Gold Card We are an equal opportunity employer and encourage applications from individuals of all backgrounds, regardless of race, gender, ethnicity, religion, disability or age. TPBN1_UKTJ

We're looking for a Third Line Support Engineer to support and maintain mission-critical systems across cloud, on-premise, and front-end environments. This is a hands-on role focused on resolving complex issues, maintaining system performance, and contributing to continuous improvement within a 24/7 service environment. You will be an experienced third line engineer who thrives on solving complex technical problems. You take ownership of escalations, work confidently across multiple platforms, and communicate effectively with both technical and non-technical stakeholders. Key Requirements 3-5 years' experience in a third-line IT support role Strong programming knowledge (JavaScript, Python, React, Node) Good working knowledge of Linux and AWS Experience with AWS Lambda and/or Bash scripting Familiarity with API management tools Strong understanding of ITIL frameworks Proven troubleshooting and problem-solving skills Excellent communication and customer service skills Ability to work independently and manage multiple priorities Full UK driving licenceDesirable: Experience with Technology Enabled Care Services (TECS) or SmartTEC systems AWS and/or relevant technical certifications (e.g. ITIL, CompTIA, CCNP) Hands‑on use of Wireshark, SIP traces, or packet analysis tools Understanding of VoIP/SIP, TCP/IP, DNS, DHCP, VLANs, and firewall configurations Experience with telecare platforms, IoT systems, or digital alarm receivers Background in customer‑facing technical roles Passion for innovation, automation, and continuous improvement You'll act as the escalation point for complex incidents, supporting Tier 1 and Tier 2 teams while leading third-line support activities. You'll diagnose and resolve high-impact issues, perform root cause analysis, and help prevent recurring problems. You'll work across cloud and on-prem environments, supporting infrastructure, applications, and integrations. The role also involves contributing to system improvements, supporting deployments, and ensuring service continuity. If you're a skilled Third Line Support Engineer looking to work on complex systems and make a real impact, we'd encourage you to apply. Spectrum IT Recruitment (South) Limited is acting as an Employment Agency in relation to this vacancy