Trabajos cad design en Deer Park, New YorkCrear alertas

GSE Dynamics, Inc., a full-service engineering and manufacturing company located in Hauppauge, NY, is seeking a Manufacturing Engineer in the Engineering Department who is organized, detail oriented and possesses strong interpersonal skills. \n Summary: \n The Manufacturing Engineer will be responsible for evaluating, designing, and implementing efficient production methods and processes. The role focuses on improving operational efficiency, quality control, and overall productivity. The successful candidate will work closely with design, production, and quality teams to ensure the most effective and innovative production strategies are applied. \n Reports to: Director of Manufacturing Planning \n Duties include: \n\n • Analyze and design efficient production processes for manufacturing systems.\n, • Develop and implement process improvements to reduce production time, cost, and waste.\n, • Create and maintain process documentation, including work instructions, procedures, and flowcharts.\n, • Collaborate with the engineering and production teams to ensure proper integration of new methods into existing systems.\n, • Conduct time studies, process optimization, and line balancing to enhance productivity.\n, • Identify potential issues or bottlenecks in production and propose corrective actions.\n, • Develop and support the introduction of new tools, technologies, and equipment to improve production processes.\n, • Ensure compliance with industry standards, safety regulations, and quality requirements.\n, • Assist in the design and layout of production lines, workstations, and facilities.\n, • Conduct root cause analysis for problems related to manufacturing efficiency or quality.\n, • Provide training and support to operators and production staff on new methods or procedures.\n, • Bachelor’s degree in Industrial Engineering, Mechanical Engineering, Manufacturing Engineering, or a related field.\n, • Proven experience in a manufacturing or production environment, ideally as a Methods Engineer or in a similar role.\n, • Strong understanding of production processes, lean manufacturing principles, and process improvement techniques (such as Six Sigma, Kaizen, etc.).\n, • Experience with process mapping, time studies, and work measurement.\n, • Proficient in using CAD software, manufacturing simulation tools, and ERP systems.\n, • Excellent problem-solving, analytical, and troubleshooting skills.\n, • Strong communication and teamwork abilities.\n, • Master’s degree in a relevant field.\n, • Experience in aerospace and defense industry\n, • Certification in Lean Manufacturing, Six Sigma, or other process improvement methodologies.\n, • Full-time, on-site role with occasional travel to production sites or vendor locations.\n, • May involve standing or walking for extended periods in manufacturing environments.\n, • Process Improvement, Production Systems Design, Manufacturing Technologies\n, • CAD and Simulation Tools, ERP Systems, Problem Solving, Data Analysis,\n, • Project Planning, Budgeting and Cost Management and Cross Functional Collaboration\n

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Position Summary: TTM is an advanced-technology leader in highly sophisticated surveillance, communications, analysis and integration solutions. Our systems are deployed across a wide range of land, sea and air applications, providing our aerospace, defense and commercial customers with a distinct tactical advantage. In this role, the PCB Staff Design Engineer will design moderate to complex printed circuit board (PCB) layouts in the domain of Digital, Analog, Power & RF interconnect applications. This includes responsibility for circuit board layout conceptualization, (CAD application by means of Siemens Xpedition, PAD's or Cadence Allegro tool sets), detail design activities and value-engineering in support of internal TTM programs. Areas of emphasis/focus include physical design (CAD implementation)/documentation utilizing best practice of electrical IPC standards/methodologies with experienced approach to manufacturing and sustaining maintenance of legacy design projects. Complementary support provided by a combination of TTM Management, Field Application Engineering, Electrical/Mechanical Engineering and NPI Manufacturing teams. Duties and Responsibilities: Design Engineering Physical Design • PCB concept sketches for assistance in design layout estimating, • PCB design suggestions/trade-offs regarding initial engineering inputs, • Support changes to existing schematic diagrams using TTM suite of tools: OrCAD and/or DxDesigner \n • Place and route components ensuring that all electrical and physical specifications meet the detailed design requirements for each PCB design. Utilization of Siemens Xpedition/PAD's and/or Cadence Allegro required\n, • Participate in design reviews, interface with electrical, mechanical, manufacturing and process engineers to design proto-type and production printed circuit boards in accordance with TTM standards and quality procedures\n, • Collaborate on assigned projects closely with Si (Signal Integrity) or various engineering disciplines, fellow designers and Program \n\n Leadership \n • Provide layout feedback to design engineers as needed to ensure functionality and manufacturability of PCB designs\n, • Create fabrication and assembly drawings (AutoCAD 2023), parts list & incorporate changes to existing design documentation. Create and maintain component libraries\n\n\n, • Generate all output files (ODB++, Bill of Materials & PCB/CCA documentation) required for the manufacture of the board and assembly\n, • Maintain change (PCN) responsibilities on re-design and documentation updates\n\n Industry and TTM-specific electrical standards and methodologies- \n • Product safety and EMI consideration during eCAD layout (UL, CSA, NEBS, Etc.)\n, • Standardization of electrical components and eCAD libraries utilizing IPC or vendor specific standards\n, • Exceedingly experienced with High-Speed PCB Design Constraints: Differential Pairs, Routing Topologies, Controlled Impedance, Length-matched Traces and Delay Tuning\n, • Demonstrated experience with RF PCB routing complexities. Implement layout rules for RF transmission lines (Micro-strip & Coplanar Waveguide), signal line isolation practices, via fencing & unique RF routing structures\n, • Audio (Analog & Digital separation) PCB best practice layout guidelines highly recommended\n, • Direct design experience related to multi-layer CCA and Flex PCB technologies \n, • Current knowledge of µ-via/HDI layout methodologies and best practices\n, • Understanding of stack-up materials/construction along with impedance modeling requirements\n\n Education and Experience: Education: Minimum Associates in Electrical Design/Drafting or BS in Electronic Technology. Related eCAD training certification/career experience will be considered in lieu of a degreed program with 10 year experience. Experience: Minimum of 10 years' experience with primary hands-on demonstrated proficiency of Siemens PAD's (VX2.8 or later), Siemen's Xpedition (VX2.14 or later) and/or Cadence Allegro/OrCAD (17.4 or later) product experience is required. Comprehensive understanding of electrical and mechanical engineering design practices related to printed circuit board electrical drafting and fabrication drawing creation experience is essential. Necessary familiarities with electrical design utilizing IPC standards, IAW IPC-2221/3 and associated specs is critical. Knowledge and methodology utilizing standard IPC Class III approach to design and manufacturing concerns is also necessary. BS or related degree in engineering or a related discipline \n • Related PCB design for the Aerospace and Defense sectors is preferred.\n, • CID/CID++ Certification for PCB Designers highly recognized as professional validation of design, documentation, and manufacturability skills within the industry.\n, • Solid oral communication and interfacing skills with technical and manufacturing personnel to resolve engineering tasks. Propose alternatives when faced with challenging PCB design situations including resolutions to non-standard problems.\n\n, • Appropriate understanding of vendor component data sheets for creation of schematic library and/or PCB footprints expected.\n #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $101,807 - $179,040 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

GSE Dynamics, Inc., a full-service defense engineering and manufacturing company located in Hauppauge, NY, is seeking a full-time seeking a skilled CNC Programmer to join our precision manufacturing team. The CNC Programmer will be responsible for developing advanced CNC programs for 3-, 4-, and 5-axis machines, supporting the machining of a wide range of materials. This role requires expertise in tooling, fixtures, part-holding techniques, and fixture design, along with the ability to train shop floor employees. \n\n Responsibilities \n\n • Develop, write, and optimize advanced CNC programs for 3-, 4-, and 5-axis milling machines.\n, • Utilize CAD/CAM software (Mastercam) to interpret engineering drawings and convert 3D models into accurate G-code.\n, • Determine the best machining strategies, tooling, feeds, speeds, and part-holding techniques to achieve quality and efficiency.\n, • Design and implement fixtures and part-holding methods to support complex machining operations.\n, • Work with a variety of materials, including aluminum, titanium, steel, composites, Inconel and other specialty alloys.\n, • Analyze and troubleshoot CNC programs and machining issues, making adjustments to ensure precision and compliance.\n, • Collaborate with machinists, engineers, and quality teams to ensure parts meet AS9100 and ISO compliance standards.\n, • Maintain accurate documentation of programs, setups, and revisions.\n, • Work with team CNC operators in the set up and operation of CNC equipment.\n, • Monitor output and proper operation of mechanical equipment.\n, • Use precision measuring instruments including micrometers and calipers and fixtures and gauges to check work.\n, • Read instruments and gauges to accurately measure dimensions on parts within a .001 tolerance.\n, • Maintain company safety requirements.\n\n \n Qualifications: \n\n • Minimum 5 years of experience with CNC programming and operating CNC machines.\n, • Skilled in CAD/CAM software (Mastercam)\n, • Proficient in programming 3-, 4-, and 5-axis CNC milling machines.\n, • Strong knowledge of tooling, fixtures, fixture design, and advanced part-holding techniques.\n, • Proficient in understanding of G-code and M-code programming.\n, • Blueprint with GD&T reading capabilities.\n, • Ability to work in a manufacturing environment, lift up to 40 lbs. and support hands-on machining as needed.\n, • Ability to follow written and verbal instructions.\n

Job Description About the Role: The Senior Manufacturing Engineer is a hands-on technical leader responsible for designing, implementing, and optimizing manufacturing processes for complex medical device or precision manufacturing environments. This role focuses on process development, automation, cost optimization, and continuous improvement while ensuring quality, safety, and regulatory compliance. The Senior Manufacturing Engineer plays a key role in scaling production, mentoring junior engineers, and driving operational excellence across manufacturing operations. Responsibilities: * Evaluate and optimize manufacturing processes based on efficiency, throughput, quality, and cost metrics. * Design, test, and implement new manufacturing processes for new product introductions and existing production lines. * Lead or support cost estimation activities for new and ongoing manufacturing programs. * Develop and validate automated and manual manufacturing systems. * Design, install, and qualify manufacturing equipment, tooling, and fixtures. * Analyze production requirements, machine capabilities, and capacity planning needs. * Optimize facility layouts, production lines, workflows, and machine utilization. * Identify and resolve production issues, bottlenecks, delays, and quality concerns. * Drive continuous improvement initiatives focused on cost reduction, yield improvement, and quality enhancement. * Train manufacturing staff on new and existing processes and standard work. * Mentor and develop junior manufacturing engineers and technical staff. * Collaborate with cross functional teams including engineering, quality, suppliers, and contractors. * Ensure all manufacturing processes comply with safety, environmental, and regulatory requirements. * Evaluate and implement new technologies to upgrade manufacturing systems and processes. Qualifications: * Bachelors degree in Mechanical Engineering or a related engineering discipline. * Ten or more years of experience as a manufacturing engineer or in a similar role. * Strong knowledge of manufacturing processes, fabrication methods, tooling, and CNC machining. * Experience with manufacturing equipment, automation, and quality assurance techniques. * Proficiency with CAD software and standard engineering tools, including MS Office. * Demonstrated project management, problem solving, and analytical skills. * Strong understanding of health, safety, and environmental regulations in a manufacturing environment. * Ability to work cross functionally and lead technical initiatives independently. Desired Qualifications: * Green Belt certification or formal training in Lean Manufacturing or Six Sigma methodologies. * Hands on experience with continuous improvement programs and operational excellence initiatives. * Experience supporting regulated manufacturing environments such as medical devices or precision equipment. * Strong leadership skills with a proven ability to mentor and develop engineering talent.

Job Description CAD Designer / Illustrator Specialist Nauteva Marine Flooring Location: Long Island, NY Company: Nauteva Marine Flooring Nauteva Marine Flooring is a premium marine flooring company specializing in custom CNC-cut foam decking for boats. Our products combine precision manufacturing with high-end design, and we are looking for a CAD Designer / Illustrator Specialist to help turn customer boat templates into beautifully engineered flooring layouts ready for CNC production. This role is perfect for someone who enjoys technical design, precision work, and seeing their digital designs become real products installed on boats across the country. What You'll Do: • Create custom boat flooring layouts using Adobe Illustrator, • Convert boat templates and measurements into accurate vector CAD files, • Prepare files for CNC cutting and production, • Work closely with our production team to ensure designs cut cleanly and efficiently, • Optimize designs for material usage and CNC performance, • Communicate with team members to adjust layouts, seams, logos, and patterns, • Maintain organized file structures and project documentation, • Occasionally assist with CNC machine setup or file transfer What We're Looking For: Required Skills • Expert-level Adobe Illustrator experience (this is critical), • Strong understanding of vector paths, layers, and precision layout work, • Ability to work with exact measurements and tolerances, • Comfortable preparing files for CNC machines or digital fabrication Bonus Experience • Experience with CNC routers or cutting tables, • Background in CAD, fabrication, or manufacturing environments, • Marine industry familiarity, • Experience working with templates or physical measurements The Ideal Candidate You are someone who: • Enjoys precision and problem solving, • Can translate measurements into clean, accurate digital layouts, • Takes pride in producing work that is both beautiful and manufacturable, • Understands the importance of details and accuracy in production, • Likes the idea of seeing your designs installed on real boats Why Work With Us Nauteva is a fast-growing marine brand focused on premium custom products and craftsmanship. Our team blends design, technology, and manufacturing to produce flooring systems used by boat owners and builders across the country. You’ll work in a collaborative environment where your designs directly impact the finished product. Company DescriptionNAUTEVA Marine Floor was established in 2019. We are building a brand that offers only the very best in materials, 50+ years of fabrication knowledge, an experienced installation crew paired with a level of customer service that doesn't exist in the boating industry. We provide a fully customizable flooring experience for the customer with a seamless process that ensures positive results. We are backed by our parent company, 71 Visuals. A signage branding company that was established in 1971. Through the years we have had the opportunity to work with some of the biggest brands in the world. It's with that same enthusiasm that we plan to deliver to the marine industry. At NAUTEVA, we thrive in a culture of collaboration where everyone contributes to our shared success. We value a strong work ethic, a positive and enthusiastic approach to challenges, and a relentless pursuit of innovation. Respect for our colleagues and unwavering integrity are paramount in all our interactions. If you share these values and are eager to join a team that strives for excellence, we encourage you to apply.NAUTEVA Marine Floor was established in 2019. We are building a brand that offers only the very best in materials, 50+ years of fabrication knowledge, an experienced installation crew paired with a level of customer service that doesn't exist in the boating industry. We provide a fully customizable flooring experience for the customer with a seamless process that ensures positive results. \r\n\r\nWe are backed by our parent company, 71 Visuals. A signage branding company that was established in 1971. Through the years we have had the opportunity to work with some of the biggest brands in the world. It's with that same enthusiasm that we plan to deliver to the marine industry. \r\n\r\nAt NAUTEVA, we thrive in a culture of collaboration where everyone contributes to our shared success. We value a strong work ethic, a positive and enthusiastic approach to challenges, and a relentless pursuit of innovation. Respect for our colleagues and unwavering integrity are paramount in all our interactions. If you share these values and are eager to join a team that strives for excellence, we encourage you to apply.

Job Description Join iRocket for a Summer 2026 internship and get hands-on experience building reusable space-launch vehicles. Interns will be embedded in teams across propulsion, avionics, manufacturing, test, launch operations, and data. This is a chance to contribute to real hardware, real tests, and real launches. The Role • Work on meaningful projects under mentorship from senior engineers., • Contribute to hardware design, test campaigns, manufacturing workflows, data-pipelines, or launch readiness tasks., • Participate in team meetings, hardware builds, data reviews, and test/launch operations., • Currently enrolled in a Bachelor’s or Master’s program in Engineering, Computer Science, Data Science, or related technical field., • Strong academic performance, interest in space/launch, and ability to work in a fast-paced, multidisciplinary environment., • Experience with CAD, coding, data analytics, lab/test work, or manufacturing is a plus., • U.S. Citizenship or eligibility to work in the U.S. without sponsorship.

Job Description Job Title: CAD Designer – 3D & Graphic, Tara Toy Department: Product Design Reporting To: Director, Product Design Location: Hauppauge, NY Company Overview: Just Play is a passionate and trend driven leader in the children’s consumer goods industry. Our products are an impressive mix of promotional and everyday items for the whole family. We work with the world’s leading children’s entertainment brands to manufacture and distribute exceptional products to every major mass retailer throughout North America and around the world. Job Summary: We're a fast-moving toy company looking for a versatile and experienced CAD Designer to join our creative team. This role is ideal for someone who can primarily work on 3D product design but is willing and able to take on occasional graphic design tasks like packaging, branding, and licensing work when needed. If you're passionate about toys, love to collaborate, and can keep pace with tight timelines, we’d love to hear from you. This is not a hybrid role, and being on site five days a week is required. Principal Responsibilities: • Create detailed and accurate 3D CAD models for toys and related products., • Develop technical drawings and files for prototyping and manufacturing., • Collaborate with product development, marketing, and licensing teams to ensure cohesive design execution., • Support license-based design work, adapting assets for various product lines and packaging formats., • Work on multiple projects in a fast-paced, team-oriented environment., • Occasionally design packaging layouts, branding elements, and presentation materials. Minimum Qualifications: • 3+ years of experience in CAD design, preferably in toys, consumer products, or similar industries., • Proficiency in 3D software such as SolidWorks, Blender, ZBrush, Rhino, Fusion 360, or similar., • Graphic design skills with hands-on experience using Adobe Creative Suite (Illustrator, Photoshop, InDesign)., • Comfortable working on both original products and licensed IPs., • Highly organized with strong attention to detail and ability to meet deadlines., • Experience in the toy industry or children’s consumer products preferred., • Understanding of toy safety standards, prototyping, or manufacturing processes preferred., • Illustration or rendering skills preferred., • Fluency in English (both written and verbal)., • Please include a copy of, or link to, your portfolio for review. Just Play is an equal opportunity employer. We welcome all applicants without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description A confidential, industry-leading RF/microwave manufacturer is looking for an experienced RF Amplifier Design Engineer to design, develop, and test low noise and medium power amplifiers using both discrete transistor and MMIC technologies. You’ll work across hybrid and surface-mount designs, run linear and nonlinear simulations, support production, and contribute directly to new product development. This is a hands-on engineering role with real visibility inside the organization. What You’ll Do * Design, develop, and test discrete and MMIC-based low noise/medium-power amplifiers * Build new RF and microwave circuits, components, and products * Perform linear and nonlinear simulations for active and passive circuits * Define specs for microwave components and subassemblies * Support high-reliability testing and screening requirements * Generate design reviews, test reports, and documentation * Work with manufacturing teams to ensure efficient build processes * Estimate project schedules, track engineering labor, and support technical proposals What You Need * Bachelor’s in Electrical Engineering with 4+ years experience, or Master’s with 2+ * At least 2 years designing and simulating low noise amplifiers * Experience designing passive RF/microwave components (couplers, dividers, attenuators) * Experience designing for manufacturability and managing engineering projects * Proficient with linear CAE tools plus exposure to nonlinear CAE * Hands-on lab/test experience: VNAs, noise figure analyzers, spectrum analyzers, power meters, signal generators * Ability to work under a microscope in a cleanroom environment * Familiarity with semiconductor devices like GaAs and GaN * Strong communication skills * Must be able to obtain a Secret-level security clearance Preferred Experience * Familiarity with MIL-specs: MIL-PRF-38534, MIL-STD-202 * Experience aligning and tuning fine-pitch circuits under a microscope * Knowledge of oscillator, synthesizer, PIN-diode, and filter design * System-level cascade and spur analysis * Proficiency with Keysight ADS, RFPro, Ansys HFSS, and EM simulation tools * CAD familiarity: AutoCAD, Inventor * Design/test experience up to 26 GHz or higher (40 GHz preferred) * Hybrid chip-and-wire and PCB SMT manufacturing exposure * Wire bonding experience

Job Description Schivo Medical in Plainview, New York manufactures a diverse range of essential medical technology solutions. Working with us, you will be apart of the manufacturing process of a vast array of different products including robotic surgery instruments medical devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will work with a team of professionals that are committed to helping create parts that save lives and help assist you with a fulfilling and rewarding career. Senior Manufacturing Engineer job summary: A Manufacturing Engineer is responsible for designing, implementing, and reviewing the procedures and equipment involved in the manufacturing process. Their duties include researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. Lead or assist in the cost estimating process. Senior Manufacturing Engineer Necessary Education, Skills, and Competencies (including licensing and certifications): • 10 years of work experience as a manufacturing engineer or similar role needed, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g. CAD, MS Office), • Project management skills, • Problem-solving ability, • Teamwork skills, • Degree in Mechanical Engineering or related field(CNC Machining), • Green belt certificate a plus, • Working knowledge with continuous improvement process Senior Manufacturing Engineer Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Provide cost estimations for new and existing projects., • Create, test, and implement manufacturing process., • Study production and machine requirements, • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Develop and mentor Junior engineers, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with new technology Benefits: • Employee referral, • 401(k), • 401(k) matching, • Dental insurance, • Vision insurance, • Life Insurance, • Employee assistance program, • Health insurance, • Paid time off, • Referral program * Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Description Mechanical Engineer Behlman Electronics, a leading power supply design firm located on Long Island, NY which was founded over sixty-five years ago as an engineering, manufacturing, and consulting firm for power products. Over that time, it has grown to become a leading power solutions provider for applications demanding cutting edge performance for commercial, industrial, and military mission-critical applications, is looking for a motivated technically minded individual for a position on its Engineering Team Job Description: The selected candidate will be expected to execute in a small, yet diverse, team environment through all phases of the product life cycle, this includes concept development, detail design, qualification, manufacturing transition, and production support. The engineer will be responsible for supporting the development of innovative and robust power supply solutions to meet demanding customer requirements and will leverage their mechanical engineering expertise to perform detailed design and analyses. Day to day, activities include working with 3D solid models, drawings, performing analyses to assure fit & function; performing thermal, structural/stress, and vibration analyses; assessing designs against environmental requirements. Desired Skills and Education: • Required Education: Bachelor's Degree in Mechanical Engineering or equivalent degree, • 3-5 years of relevant experience preferred., • Knowledge in fundamentals of mechanical design, analysis, and documentation principles, • Experience in Electronics Packaging and thermal simulation and analytical techniques. (Computational Fluid Dynamics, Finite Element Analysis etc)., • Experience with CAD development tools such as Inventor, Solidworks or Creo., • Strong written and verbal communication skills Salary - $90,000 - $100,000 Based on Experience. 401K Health Insurance Vision and Dental Insurance Life Insurance Paid Time off (Vacation, Holidays, sick leave etc.) Flexible Spending Accounts Tuition Assistance End of year time off Opportunities for advancement This is an on-site position and candidates must be a US Citizen or Permanent Resident. Company DescriptionBehlman Electronics Inc., an ISO 9001:2008 company, designs and manufactures a wide array of power productsBehlman Electronics Inc., an ISO 9001:2008 company, designs and manufactures a wide array of power products

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description HVAC Drafter Location: Farmingdale, NY Employment Type: Full-time, Permanent Salary: Up to $90,000 3D drafting experience required A well-established HVAC firm located in Farmingdale, NY is seeking an experienced HVAC Drafter to join their team. This role involves creating detailed technical drawings and plans for heating, ventilation, and air conditioning (HVAC) systems. The drafter will work closely with engineers, project managers, and other design professionals to transform specifications and concepts into precise CAD drawings for construction and installation. Responsibilities: • Create accurate HVAC layouts, including ductwork, piping, and equipment plans, using AutoCAD, Revit, or similar software, • Interpret architectural and engineering drawings, specifications, and relevant building codes, • Develop simple 3D models of HVAC duct and piping systems using AutoCAD MEP and Revit, • Update 2D drawings to 3D formats for enhanced visualization and coordination, • Provide 3D layout support to identify spatial conflicts and improve design accuracy, • Coordinate with engineers and project managers to meet design intent and project goals, • Revise drawings based on markups, field changes, and updated requirements, • Assist with load calculations, equipment selection, and basic HVAC design tasks, • Maintain compliance with drawing standards and applicable codes, • Associate degree or technical certification in drafting, mechanical design, or a related field, • Proficiency in AutoCAD, Revit, and other HVAC-related design software, • Solid understanding of HVAC systems and terminology, • Knowledge of building codes, ASHRAE standards, and construction documentation, • Strong attention to detail and organizational skills, • 3+ years in HVAC drafting or mechanical drafting roles, • Experience with commercial, residential, or industrial HVAC projects, • Familiarity with BIM (Building Information Modeling) workflows Company DescriptionThe Bachrach Group (TBG) is a New York-based staffing and recruiting agency founded in 1974 by Richard Bachrach. The agency specializes in facilitating placements for professionals across various industries on a nationwide scale. TBG's overarching mission is to deliver tailored staffing solutions to its client base while simultaneously providing job seekers with career prospects. The company relies on its team of recruiters, who leverage their industry knowledge and networks to connect employers with top talent. TBG provides a comprehensive range of staffing services, including direct hire, temporary staffing, Recruitment Process Outsourcing (RPO), and contract staffing. The agency has consistently achieved notable rankings in Crain's lists, ranking as the largest search firm in NYC since 2020.The Bachrach Group (TBG) is a New York-based staffing and recruiting agency founded in 1974 by Richard Bachrach. The agency specializes in facilitating placements for professionals across various industries on a nationwide scale. TBG's overarching mission is to deliver tailored staffing solutions to its client base while simultaneously providing job seekers with career prospects. The company relies on its team of recruiters, who leverage their industry knowledge and networks to connect employers with top talent. TBG provides a comprehensive range of staffing services, including direct hire, temporary staffing, Recruitment Process Outsourcing (RPO), and contract staffing. The agency has consistently achieved notable rankings in Crain's lists, ranking as the largest search firm in NYC since 2020.

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionDescription: Aerospace Tool Designer Join our innovative aerospace engineering team as an Aerospace Tool Designer, where you will play a vital role in designing and developing essential tools that support the manufacturing and assembly of aircraft structural components. This position offers an exciting opportunity to contribute to the creation of high-precision tooling solutions that ensure quality and efficiency in aerospace production. Key Responsibilities: • Design, develop, and refine tools, jigs, fixtures, molds, and gauges used in aircraft manufacturing processes., • Support the entire tooling lifecycle, from initial concept and design reviews to procurement, production implementation, and documentation., • Collaborate with cross-functional teams to ensure tooling designs meet engineering specifications, safety standards, and production requirements., • Conduct design reviews and modify tooling based on feedback and testing results., • Maintain accurate documentation and configuration control for all tooling designs and revisions., • Assist in troubleshooting tooling issues during production and implement improvements as needed. Skills and Qualifications: • Strong understanding of manufacturing processes, materials, and aerospace standards in English., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment and communicate effectively., • Knowledge of quality control and documentation procedures related to tooling. We foster a collaborative and innovative work environment that values continuous improvement and professional growth. Our company offers competitive benefits and opportunities to advance your career in the dynamic aerospace industry. Requirements: Key Responsibilities Tool Design & Modeling • Develop detailed 3D models and 2D drawings for a wide range of aerospace tooling, including assembly jigs, fixtures, molds, and gauges., • Design tooling solutions that support complex manufacturing and assembly challenges from concept through production., • Utilize CAD software such as Siemens NX, CATIA V5, and/or SolidWorks to create, modify, and maintain tooling designs., • Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accuracy, repeatability, and manufacturability., • Apply basic structural analysis principles and conduct research to validate tooling concepts and designs., • Ensure tooling meets quality, safety, ergonomic, and regulatory requirements., • Incorporate Design for Manufacturability (DFM) principles to ensure tools can be produced efficiently and cost-effectively., • Manage the complete tooling design lifecycle, from concept development through release to production., • Participate in and lead design reviews; provide constructive feedback to peers and stakeholders., • Develop tooling usage instructions, maintenance plans, and evaluation criteria, including calibration and load-testing requirements., • Support methodization and standardization of tooling and processes to improve product quality and reduce manufacturing cycle times., • Collaboration & Communication, • Work closely with cross-functional teams including Engineering, Manufacturing, Operations, and Quality., • Communicate effectively with internal stakeholders and external vendors to ensure tooling requirements, schedules, and deliverables are met., • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Aeronautical Engineering, or a related field, with a minimum of four (4) years of aircraft tooling design experience., • In lieu of a degree, a minimum of eight (8) years of directly related aircraft tooling design experience., • Proven experience designing tooling for aerospace manufacturing or assembly environments is required. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Tuition assistance The RF Engineer applies principles of RF/Electrical Engineering to solve complex technical challenges in research, development, and manufacturing environments. The role focuses on the design, development, testing, and production of RF Power Amplifier devices and systems, providing solutions to both routine and complex engineering issues under general supervision. Key Responsibilities: • Evaluate and test RF circuits, systems, and modules to meet specifications; modify as needed to achieve performance goals, • Conduct Acceptance Test Procedures (ATPs) on complete RF Power Amplifier Systems, • Develop and prototype new RF power amplifier gain stages, ensuring compliance with high-performance specifications, • Collaborate with engineering and manufacturing teams to ensure accurate data transfer and process control during product transition to manufacturing, • Design and develop next-generation RF systems specifically tailored for defense and medical applications in the IMHZ-2GHZ range, • Provide technical support and coordination to facilitate product development, manufacturing, and the transition of new designs into production, • Assist in preparing technical bids and proposals; occasionally attend customer design reviews and field-testing activitiesQualifications: Education: • Bachelors degree in Electrical Engineering (BSEE), Mechanical Engineering, Applied Science, or equivalent experience without a degreeExperience:, • 35 years of experience in microwave/RF design and developmentTechnical Skills:, • Proficiency in RF/microwave design and PCB layout, • Hands-on experience with testing, tuning, and modifying RF circuits, • Familiarity with CAD and simulation tools (ADS, HFSS, AutoCAD, PADS is a plus), • Skilled in using RF test equipment such as network analyzers, spectrum analyzers, power meters, and oscilloscopesSpecialized Knowledge:, • Experience in high-power solid-state amplifier design, • Familiarity with both packaged surface mount components and bare die technologies, • Experience with circuits operating up to 2GHZPreferred Qualifications:, • Proven experience in designing high-power solid-state RF amplifiers, • Knowledge of advanced simulation tools and RF design techniques, • Willingness and ability to travel occasionally for customer support and field service

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionJob Title: CNC ProgrammerJob Description We are seeking a skilled CNC Programmer to develop, write, and optimize advanced CNC programs for 3-, 4-, and 5-axis milling machines. This role involves utilizing CAD/CAM software (Mastercam) to interpret engineering drawings and convert 3D models into precise G-code. The ideal candidate will determine the best machining strategies and techniques to ensure quality and efficiency. Responsibilities • Develop, write, and optimize CNC programs for milling machines., • Utilize Mastercam to interpret engineering drawings and convert 3D models., • Determine machining strategies, tooling, feeds, speeds, and part-holding techniques., • Design and implement fixtures and part-holding methods for complex operations., • Work with various materials including aluminum, titanium, steel, and composites., • Analyze and troubleshoot CNC programs and machining issues., • Collaborate with machinists, engineers, and quality teams to ensure compliance., • Maintain accurate documentation of programs, setups, and revisions., • Assist CNC operators in the setup and operation of CNC equipment., • Monitor output and proper operation of mechanical equipment., • Use precision measuring instruments to check work within .001 tolerance., • Maintain company safety requirements.Essential Skills, • Minimum 5 years of experience with CNC programming and operating CNC machines., • Skilled in CAD/CAM software (Mastercam)., • Proficient in programming 3-, 4-, and 5-axis CNC milling machines., • Strong knowledge of tooling, fixtures, fixture design, and advanced part-holding techniques., • Proficient in understanding of G-code and M-code programming., • Blueprint reading with GD&T capabilities.Additional Skills & Qualifications, • Ability to work in a manufacturing environment and lift up to 40 lbs., • Ability to follow written and verbal instructions. Medical dentl vision 401k Workplace Type This is a fully onsite position in Hauppauge,NY. Application Deadline This position is anticipated to close on Mar 24, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Experienced CAD Manager needed for well established electrical contractor on Long Island. MTA experience is required. MUST know Microstation. Salary up to $170k including medical/dental/401k match. Oversees a team of CAD designers, ensuring the accurate and efficient creation of electrical schematics and control panel designs using software like AutoCAD Electrical. Key responsibilities include managing staff, setting design standards, providing technical support, training the team, and managing CAD software and libraries. Core responsibilities • Team and project management: Lead and mentor a team of CAD designers, delegate tasks, manage resources, and oversee project workflows to ensure timely and high-quality delivery., • Technical leadership: Provide expert guidance on electrical design projects, particularly in areas like UL508A control panel design and schematics., • CAD standards and quality control: Develop, maintain, and enforce the company's CAD standards and procedures. Review and ensure the quality and accuracy of all CAD outputs., • Software and library management: Manage CAD software, hardware, and symbol libraries. Analyze productivity enhancements and implement necessary customizations., • Training and support: Train internal users on CAD standards and best practices. Provide ongoing technical support and help resolve issues for the design team., • Experience: Minimum of 5-10 years of experience using AutoCAD and/or AutoCAD Electrical, with supervisory or management experience required. MICROSTATION REQUIRED

Job Description iRocket is pushing the frontier of reusable rocket propulsion. We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines. The Role • Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines., • Perform hydrodynamic, aerodynamic, bearing, and rotor-dynamics analysis for rotating assemblies., • Develop manufacturing plans and build books, manage tolerance stack-ups, and ensure as-built compliance., • Monitor performance trends, analyze cavitation, vibration, thrust-balance, and clearance growth., • Execute root-cause investigations, iterate designs to improve cost, lead-time, and reliability., • Bachelor’s degree in Mechanical or Aerospace Engineering., • 3+ years of turbomachinery or rocket-engine component experience, including design/build/test of turbopumps or related systems., • Strong knowledge of fluid/rotordynamics, cryogenics, bearings, and rotating machine behavior., • Proficiency in CAD (Siemens NX, SolidWorks, etc.), CFD/FEA, and test instrumentation., • Experience with machined, additively-manufactured parts, weldments, fasteners, seals, and rotating assemblies., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Free uniforms, • Health insurance, • Develop detailed technical drawings and specifications for retail window displays and pop ups., • Ensure that all project builds are designed with Health and Safety at the forefront of your mind., • Providing Build Drawings and CNC files., • Liaising with Project Managers on project requirements and deadlines.- Work closely with the Production Team to ensure that designs can be efficiently and accurately produced. • Conduct regular quality checks on prototypes and final products to verify accuracy and adherence to design specifications., • Participate in meetings with clients to present technical drawings and discuss project requirements. • Work closely with the design team whilst designing a project for a client. Ensuring that what is designed is achievable in project guidelines, budgets and timelines - whilst also thinking about whats best for the client., • Identify opportunities to streamline processes, improve efficiency, and enhance the overall quality of drafting work., • Proactively seek feedback and implement best practices to support ongoing learning and professional development.Qualifications: • 5+ years of experience in technical drafting for retail window displays and pop ups., • Must use SolidWorks or Inventor, • Proficiency in CAD software such as SolidWorks or Rhino., • Strong understanding of manufacturing processes and materials. • Excellent management skills with the ability to prioritize tasks and meet deadlines., • Detail-oriented mindset with a focus on quality assurance and continuous improvement.- Strong communication and interpersonal skills to collaborate effectively with cross-functional teams. • Ability to problem solve and troubleshoot technical issues as they arise., • Knowledge of health and safety regulations in the retail industry. If you have a passion for creative design and a strong technical background, we invite you to apply for this exciting opportunity to lead a dynamic team in designing innovative retail displays.

Job Description Role overview We’re hiring a Senior Machinist: CNC / GD&T / G&M Code / Setup with hands-on experience setting up and running multi-axis CNC equipment. You’ll own setups end-to-end, help prove out new programs, and support both R&D builds and short production runs. What you’ll do • Read and interpret engineering drawings, setup sheets, and related documentation; apply GD&T requirements., • Set up and operate multi-axis CNC milling and turning equipment (including mill-turn / live tooling where applicable)., • Configure workholding and fixtures (vise, soft jaws, tombstones, custom fixtures) per setup documentation and best practices., • Run, validate, and help prove out new CNC programs; support first-article / first-piece verification., • Diagnose machining issues and make minor program/parameter adjustments (feeds/speeds, offsets) during runs., • Perform in-process and final inspection using standard precision metrology tools; document results as required., • Maintain machines and work area (basic preventive care, cleanliness, chip/coolant management)., • Adapt between fast-turn prototype/R&D work and short-run production while maintaining quality and repeatability. About the team The CNC Machining team works directly with the engineering and manufacturing teams to produce precision components for propulsion and vehicle systems. About iRocket Founded in 2018, Innovative Rocket Technologies Inc. is revolutionizing the space industry as the first fully autonomous and 100% reusable rocket manufacturer. iRocket is building the world’s first reusable rocket engines with a setup focused on reusability from the beginning, including high performance and long life. We will Recondition, Reload, and Relaunch™ our rockets synonymous with how we use airplanes today for multiple daily flights in under 24 hrs. achieving reusability 2.0. Utilizing cutting-edge 3D printing and additive manufacturing technology, we’re dedicated to providing reliable and rapid access to space at a low cost. Our innovative design addresses the inefficiencies in the industry, while our proprietary reusable engine technology positions us as the leading small launch service provider. Join us on our journey to space. Requirements Required qualifications • 3+ years experience as a CNC machinist/operator and setup technician in a precision environment., • Must be proficient in G-Code and M-Code programming with the ability to troubleshoot, edit, prove out processes, perform first piece runs, and recommend changes to programs on multi-axis machine tools proficiently., • Experience with multi-axis machining (3+1 / 3+2); familiarity with complex toolpaths and 3D surfaces., • Experience with live-tooling lathes, mill-turns, or multi-task machines., • Working knowledge of machining a range of materials (e.g., aluminum alloys, stainless, alloy steels, and other engineering materials)., • Solid understanding of tooling, tool life, cutters, and fixturing methods., • Intermediate ability to interpret and apply GD&T., • Able to take ownership of the setup and run process from start to finish; comfortable juggling multiple competing priorities., • U.S. Person status required due to access to export-controlled technical data. Preferred qualifications • Experience with simultaneous 5-axis setup and operation., • Experience working with Okuma CNC machines and controllers., • Comfortable referencing a CAD model to verify dimensions/features (model-based measurement)., • Experience with CMM inspection (e.g., PC-DMIS or similar). Benefits What we offer • Competitive hourly pay at $33/hr-$43/hr (commensurate with experience), • Benefits: [Health/Dental/Vision/401(k)/PTO], • High-impact work on real aerospace hardware, • Fast-paced environment with direct collaboration across engineering, test, and manufacturing

Job Description Landscape Design/Build firm seeking landscape designer/CAD tech. Coastal Designs has been in business for more than 45 years and we are currently seeking an energetic, and motivated professional to join our team. Our company deals in high-end residential and commercial landscapes and we are looking for someone who wants to begin a career in landscape design/construction. Qualifications: • 2 Years Experience using CAD software, Excel and Word a must, • Good working knowledge of computers, • Organized, motivated, and energetic, • AOS College degree preferred, • Landscape Design experience a plus but not necessary -Reliable transportation to and from work, as well as to job sites for measuring Job Duties: • Measure Job sites (Own Transportation is required), • Create detailed plans, • Assist in estimating and creating proposals, • Order materials when necessary, • Assist in obtaining permits, • Interact with customers, vendors, and subcontractors on a regular basis, • Be able to complete a wide range of tasks Saturdays during our busy season (April-July) may be required if work load permits : will be paid at time and a half. 8am-5pm Monday through Friday are the standard hours, Saturdays may vary as stated above Job Type: Full-time Salary: $17.00 to $22.00 /hour Company DescriptionLandscape Design CompanyLandscape Design Company

Strong Microsoft Office skills (Excel required); familiarity with Bluebeam or AutoCAD is a plus.

Lead and oversee the planning, analysis, and design of bridge and structural projects. Extensive knowledge of AASHTO, NYSDOT, NYCDOT, and applicable design codes and standards. Proven experience leading design teams and managing large-scale projects.

We are currently engaged by a growing heavy civil contractor with an established presence in the New York market.Due to continued success within public infrastructure and transportation projects, they are looking to add an experienced Project Manager to their team.This is an opportunity to join a co

Utilize engineering software such as AutoCAD, Revit, and HVAC load calculation tools to create accurate designs and calculations. Integrated Construction, Design and Technology Solutions”. Work with Senior Engineers and Lead the design and development of HVAC systems for commercial and institution

Construction Management company seeking an experienced Senior Project Manager to join its rapidly growing 50-year-old company.This Senior Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure

Integrated Construction, Design and Technology Solutions”.

Construction Management company seeking an experienced Project Manager to join its rapidly growing 50-year-old company.This Project Manager must plan and supervise a wide range of construction projects from start to finish by organizing and overseeing construction procedures to ensure they are compl

Integrated Construction, Design and Technology Solutions”.

Construction Project Safety Manager.Montante Construction is seeking a Construction Project Safety Manager to join our growing team! If your skills, experience, and passion for safety at the job site align with this position, we would love to hear from you!.Montante Construction is a full-service co

Utilize engineering software such as AutoCAD, Revit, and HVAC load calculation tools to create accurate designs and calculations. Lead a team to conduct site surveys and assessments to gather data for system design and retrofitting. Collaborate with architects, clients, and other engineering discipl

Construction Project Safety Manager.Montante Construction is seeking a Construction Project Safety Manager to join our growing team! If your skills, experience, and passion for safety at the job site align with this position, we would love to hear from you!.Montante Construction is a full-service co

Ready to join a fun, growing athleisure brand? GOAT USA is looking for an exceptional IT Project Manager to lead and deliver technology initiatives that support our apparel retail and wholesale business.In this role, you will manage cross-functional IT projects from planning through execution, ensur

Now Hiring: Lead Commercial Roofing Project Manager!.Are you ready to elevate your career in the construction industry? Join a highly respected commercial roofing company that values your expertise and leadership capabilities.Commercial Roofing Project Manager.Our client is renowned as a premier com

Manage direct mail production for 4–7 nonprofit clients, depending on scope and cadence.

The Project Manager must have demonstrated corporate experience and provide support staff meeting the following requirements:.Accountable for creating and managing a comprehensive Master Project Management Plan with subordinate Risk Management Plan, Human Resources Plan, Communications Plan and Qual

Responsibilities Leads and facilitates cross-functional teams through all phases of the new product development process from concept through product design, integration into manufacturing, and product release Develops, manages and reports on the project plan, schedule and budget with input from vari

Experience with Procore, Bluebeam, and AutoCAD preferred.

Interior Designer Job Duties: Develops design concepts and produces contract documents based on client needs. Create design concepts and digital presentations with finish selections, furnishings,

Experience with and understanding drawings from AutoCAD, Creo and SolidWorks.