Cad design jobs in Louisville, KentuckyCreate job alerts

Job DescriptionDescription: JOB TITLE: Controls Engineer Co-Op REPORTS TO: Engineering Manager JOB STATUS: Full Time FLSA STATUS: Non-Exempt JOB SUMMARY: The Controls Engineer Co-Op is responsible for assisting in the support of all phases of a controls project to include assistance in concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working under an experienced engineer and an established set of guidelines. ESSENTIAL FUNCTIONS: • Able to use computer software for design engineering and PLC and HMI programming., • Capable of basic trouble shooting of a system and communicate status – verbally and written., • Assist and support the process for designing and delivering successful control., • Support in designing and developing layouts for electrical circuits or systems for power and control distribution., • Assist in the production of detailed schematics., • Support the Systems Checklist for projects during field installation and startup., • Assist with Systems documentation and manual creation, • Assist in the development of electrical diagrams., • Be a valuable contributor to project teams., • Communicate with other team members effectively, • Office setting and field locations., • Collaborative, engaging and success driven culture, • Sitting for prolonged periods of time, • Repetitive typing/data entry It is the policy of ControlTouch Systems to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, ?physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), ?or any other characteristic protected by federal, state or local law. In addition, ControlTouch Systems will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Has knowledge of commonly used concepts, practices, and procedures with controls, • Basic programming and design knowledge, • Basic CAD knowledge, • Basic knowledge of MS Office Suite, • Demonstrate effective organizational skills and multi-tasking abilities, have an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment., • Critical thinker and problem-solver, • Self-starting instincts and strong analytical skills, • Excellent verbal and written communications skills, • Must be actively pursuing a Bachelor's or Master’s degree in engineering – preferably EE, EET or CECS from and accredited university/college., • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed

Job Description Position Summary: Dant Clayton has opportunities for candidates to become part of an exciting and growing company in the world of sports facility design, fabrication, and construction. The Design Automation Specialist – Inventor API / iLogic performs a variety of activities supporting the design department to deliver 3D fabrication-ready part files to the in-house manufacturing department using Autodesk Inventor, while also managing a library of parametric parts in Autodesk Vault. This role will help shape the organization through the use of 3D design technology and processes that align with company objectives. Dant Clayton is seeking a candidate who can bring fresh ideas to the table and collaboratively improve Design for Manufacturing & Assembly (DFMA) principles and design automation processes within a fast-growing team. Essential Job Duties: • Create, maintain, and organize custom Autodesk Inventor parts and assemblies within Vault for fabrication teams., • Lead development of Inventor & Vault processes with automation (iLogic, PowerShell, CoolOrange, etc.), including the creation of parametric parts and assemblies., • Maintain standard processes for Inventor & Vault with internal/external design partners and other Dant Clayton stakeholders (manufacturing department)., • Implement Autodesk Inventor & Vault as a part of the standard design & manufacturing processes to streamline information transfer from design to manufacturing., • Integrate design data into the company ERP (INFOR CloudSuite SiteLine) for reporting., • Attend and participate in cross-functional team meetings; collaborate on vision and execution of company initiatives to improve design processes., • Develop comprehensive knowledge of Dant Clayton products, identify opportunities for improvement (value engineering), and make constructive suggestions for change., • Associate’s degree or higher with an educational background in manufacturing, construction, architecture, or engineering., • Certificate in Computer Aided Drafting and Design (preferred) and/or relevant experience., • Proven experience in design automation and workflows for manufacturing parametric assemblies and parts., • General understanding of manufacturing/design practices and principles; familiarity with structural framing requirements., • Demonstrated ability to manage/coordinate software implementation (Inventor or similar) for design and manufacturing processes., • Self-starter who is focused, articulate, well-organized, and detail-oriented., • Strong interpersonal skills and ability to work effectively in a team environment., • Ability to prioritize tasks and meet deadlines with a sense of urgency. Excellent communication skills, both written and verbal., • Proficiency with Autodesk Inventor, Vault, and CAD; familiarity with other 3D software, Bluebeam Revu, and Microsoft Office products., • Passion for technological advancement and personal growth., • Prolonged periods sitting at a desk and working on a computer., • Competitive Compensation Packages, • Competitive Employee Benefit Packages, • Health, • Dental, • Vision, • Life & Disability Insurance, • Comprehensive Employee Wellness Program, • Health Savings Account – Employer Contributions, • 401k with Employer Matching, • Professional Career Development Opportunities, • Learning Management System, • Paid Time Off, • Tuition Assistance Program, • Employee Reward and Recognition Program

Job Description JQOL is seeking an experienced Civil Engineer. We are actively looking for a great candidate to join our growing company. The successful candidate will work with a team to ensure projects are designed in accordance with current manuals and specifications, as well as following accepted industry practices and procedures. The chosen applicant will be integrally involved in project management, client relations, and staff allocation. As well as plan development and detailed calculations as needed. We need our team members to be versatile, enthusiastic, and have a highly team-oriented mindset. The position is open to recent Professional Engineers with 4 to 6 years or relevant experience in either the Indianapolis area or Louisville area. Responsibilities • Work will include but not be limited to financial performance of projects, staff oversight and direction, CAD design, plan details, technical specifications, estimating, quantity calculations, technical reports, permitting, shop drawing review, and engineering analyses., • The chosen applicant will work closely with the JQOL design team as well as other design partners and clients as needed., • 4-year degree in civil engineering with 4-6 years related work experience is preferred, • Professional Engineer in Indiana or Kentucky is required, • Experience with site design is required, • Familiarity with and a desire to continue to learn AutoCAD / Civil 3D, • Proficiency with Microsoft Office 365 including Word, Excel, Access, and Power Point

Job DescriptionDescription: JOB TITLE: Controls Engineer Co-Op REPORTS TO: Engineering Manager JOB STATUS: Full Time FLSA STATUS: Non-Exempt DATE: October 1, 2025 JOB SUMMARY: The Controls Engineer Co-Op is responsible for assisting in the support of all phases of a controls project to include assistance in concept and research, estimating support, component selection, network design, panel design, layout, device troubleshooting, PLC and HMI programming; on-site installation and debug; and after-sales support while working under an experienced engineer and an established set of guidelines. ESSENTIAL FUNCTIONS: · Able to use computer software for design engineering and PLC and HMI programming. · Capable of basic trouble shooting of a system and communicate status – verbally and written. · Assist and support the process for designing and delivering successful control. · Support in designing and developing layouts for electrical circuits or systems for power and control distribution. · Assist in the production of detailed schematics. · Support the Systems Checklist for projects during field installation and startup. · Assist with Systems documentation and manual creation · Assist in the development of electrical diagrams. · Be a valuable contributor to project teams. · Communicate with other team members effectively · Other responsibilities as needed. WORK ENVIRONMENT: · Office setting and field locations. · Collaborative, engaging and success driven culture · Travel up to 50% PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. · Sitting for prolonged periods of time · Repetitive typing/data entry · Lifting up to 50 pounds · WORK SCHEDULE: This position offers a flexible work schedule. General office hours are M-F, 7a-4p or 8a-5p. Working hours will vary when working at a job site to meet the requirements as needed. It is the policy of Sortation Labs, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, Sortation Labs, LLC will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: · Has knowledge of commonly used concepts, practices, and procedures with controls · Basic programming and design knowledge · Basic CAD knowledge · Basic knowledge of MS Office Suite · Demonstrate effective organizational skills and multi-tasking abilities, have an acute attention to detail, the ability to receive direction and be a high-energy team player with the ability to work independently, as well as in a group environment. · Critical thinker and problem-solver · Self-starting instincts and strong analytical skills · Excellent verbal and written communications skills · Willingness to travel to customer facilities as needed and work non-business hours based on project and customer needs. EDUCATION, EXPERIENCE AND QUALIFICATIONS: · Must be actively pursuing a Bachelor's or Master’s degree in engineering – preferably EE, EET or CECS from and accredited university/college. · Legally authorized to work in the United States

Job DescriptionMechanical Design Engineer This Jobot Job is hosted by: Christopher Singleton Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $95,000 - $125,000 per year A bit about us: Global leader in the design, development and production of systems that address the industry current and future solutions. Why join us? Competitive Base Salary Company paid health plan for employees Flexible Hours Very generous PTO Dental and Vision, FSA, HSA Small team, autonomy Many more great perks! Job Details Job Details: We are seeking a dynamic and experienced Mechanical Design Engineer to join our team in the manufacturing industry. This position offers a unique opportunity to be involved in the entire product development cycle, from initial concept through to production and beyond. The successful candidate will be a key contributor to our team, utilizing their skills in Solidworks, 3D modeling, engineering drawings, product development, project management, machine design, and design for manufacturing. With over 5 years of experience in the field, the candidate will be expected to deliver high-quality engineering solutions and contribute towards the growth and success of our company. Responsibilities: • Develop, design, and test mechanical components and systems using 3D CAD software (SolidWorks), • Prepare detailed engineering drawings and specifications for manufacturing, • Collaborate with cross-functional teams to understand product requirements and develop innovative design solutions, • Manage multiple projects simultaneously, ensuring they are completed on time and within budget, • Conduct design reviews and make recommendations for improvements, • Apply knowledge of Design for Manufacturing (DFM) principles to optimize product design for ease of manufacturing, cost efficiency, and quality, • Perform complex mechanical analyses to validate designs, • Work closely with manufacturing teams to troubleshoot and resolve design-related issues, • Bachelor’s Degree in Mechanical Engineering or a related field, • Minimum of 5 years of experience in mechanical design engineering, preferably in the manufacturing industry, • Proficiency in SolidWorks and other 3D CAD software, • Strong knowledge of engineering principles, including Design for Manufacturing (DFM), • Experience in machine design and product development, • Proven project management skills with the ability to manage multiple projects simultaneously, • Exceptional problem-solving skills with a strong attention to detail, • Excellent communication skills, both written and verbal, • Ability to work effectively in a team environment and collaborate with cross-functional teams, • Self-motivated with a strong desire to learn and stay updated with the latest industry trends, • Ability to work under pressure and meet tight deadlines Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description NFI Parts™ is North America’s most comprehensive organization providing parts, technical publications, training, and support for buses and motor coaches. NFI Parts is the parts division of NFI Group, providing replacement parts for New Flyer® transit buses, MCI® motor coaches, ADL buses, ARBOC® vehicles, as well as the product lines for the acquired NABI and Orion parts businesses. Additionally, NFI Parts has extensive cross references for parts that are common with other bus, coach, and cutaway product lines and has a mature supply base and established relationships with over 1,000 suppliers. Further information is available at . POSITION SUMMARY To work as a member of the Accounts Receivable team for the Parts Organization to execute issues and achieve departmental goals. Responsible for the timely, accurate and efficient daily administration of invoicing, cash posting and collection of accounts. WHAT YOU WILL DO: · Processing Functions for Daily Invoicing; System set for Auto Invoicing Reports, Printing of Daily Invoices, and Daily Reconciling of Invoices to Shipped-Not-Invoiced Report (SNI), Maintain information on spreadsheets (i.e. freight amounts). · Able to navigate thru SharePoint and pull banking information, and create Receipt transfers when required. · Posting Daily Bank Deposits for CAD and USD (ACH/EFT and Lockbox). · Posting CyberSource daily batches. · Create transactions in CyberSource when required and properly recording manual transactions. · Administration of Manual invoices and Credit Memo’s/ Debit Memo’s when required. · Maintenance of Customer database (i.e. addition of new customers in Oracle, addition of ship to, bill to addresses, contact names, tax profile, discounts, webstore, primary warehouse etc.). · Collections, Account Reconciliation’s · Being accountable for assigned accounts to keep within the DSO target. · Follow all current AR processes and procedures. WHAT YOU NEED TO BE SUCCESSFUL: · High School diploma or equivalent. · 3-5 years of Accounting experience, with collections a preference. · Computer skills including proficiency in Microsoft Office applications. Benefits WHY JOIN OUR TEAM: • Competitive Wages., • A continuous learning environment., • Ability to advance your career with a growing company., • Employee social committee organizes numerous events throughout the year, including summer barbecues, holiday festivities, sporting events and tournaments, and much more. OUR WHY: We exist to move people. Our mission is to design and deliver exceptional transportation solutions that are safe, accessible, efficient and reliable. NFI Group is a leading independent global bus manufacturer providing a comprehensive suite of mass transportation solutions. News and information are available at , , , , , and . #NFI

Job Description We are searching for a motivated and enthusiastic interns to join our dynamic team at HWC Engineering. As an intern, you will work closely with our experienced professionals on various multi-disciplinary projects including Road & Bridge Design, Water Resources, Construction Inspection, Land Survey, Land Development, Landscape Architecture, Urban and Regional Planning, and Economic Development. This opportunity offers hands-on experience and exposure to real-world challenges within the Civil Engineering industry, allowing you to apply your academic knowledge, enhance your skills, and contribute to the success of our projects. WHAT YOU’LL GAIN • Gain valuable hands-on experience in project work., • Learn from experienced professionals in the field., • Opportunity to contribute to real-world projects and make a meaningful impact., • Exposure to a variety of disciplines, including structural, geotechnical, and transportation engineering, landscape architecture design, urban and regional planning, and economic development., • Networking opportunities with professionals in the industry., • Potential for continued engagement or full-time employment based on performance and availability. WHAT YOU NEED • Currently enrolled in a bachelor’s or master’s degree program in a related field., • Strong academic record with coursework in structural analysis, geotechnical engineering, transportation engineering, and other relevant subjects., • Proficiency in computer-aided design (CAD) software and familiarity with engineering software such as AutoCAD, Civil 3D, or similar tools., • Excellent problem-solving skills and ability to think critically about engineering challenges., • Strong communication skills, both written and verbal., • Detail-oriented with a high degree of accuracy in work output., • Eagerness to learn, adapt, and contribute in a collaborative team environment., • Previous internship experience or exposure to civil engineering projects is a plus. Note: this internship position will typically last for 4 months, starting in May 2026. The duration may be subject to adjustment based on academic schedules and project requirements. Please note that there is no relocation or housing assistance associated with this internship. WHY WORK WITH US At HWC Engineering, our foundation is built upon a vibrant culture that celebrates diversity, collaboration, and innovation. We believe in creating an environment where every individual feels valued, supported, and inspired to thrive. • As an intern, you’ll have opportunities to learn from experienced professionals, build new skills, and explore your career interests throughout your time with us., • Our culture isn't just a statement; it's what brings us together and drives how we work, grow, and win as a team. We are humbled to have been named a Best Place to Work in Indiana by the Indiana Chamber of Commerce from 2016 – 2025; 10 years in a row!, • Teamwork is at the core of our success, and we celebrate the achievements of each member, knowing that our collective efforts lead to exceptional outcomes. Collaboration isn’t just something we talk about — it’s how we work, every day., • Enjoy a balanced workday! While you’ll spend most of your time in the office to gain hands-on experience and connect with your team, we still value work-life balance and offer flexibility when possible, depending on your role and situation. HWC Engineering is a full-service consulting engineering firm that provides water, wastewater, stormwater, transportation, inspection, site engineering, survey, landscape architecture and planning services to both the public and private sectors. Founded in 1989 in Terre Haute, Indiana, HWC has additional offices in Indianapolis, Lafayette, Muncie, Hammond, and New Albany, allowing us to provide professional engineering services to clients throughout Indiana and the Midwest. HWC is an Equal Opportunity Employer (EEO) that does not discriminate on the basis of race, religion, age, gender or any status protected by federal, state or local laws. All employment decisions are based on qualifications, merit, competence and performance.

Job DescriptionDescription: C&I Engineering is looking for a talented and driven individual to join our team! About the opportunity: Staff Instrumentation & Controls Engineer We are currently seeking a full-time Staff Instrumentation & Controls Engineer in our Louisville, KY office to help us achieve our company mission. This person will be part of the Electrical Engineering team, which is responsible for developing designs for electrical, instrument, and control systems and performing a variety of computer-based modeling, design, engineering, and planning tasks on projects. C&I is a full-service engineering design firm providing engineering/design/project management, and procurement services to various clients in oil & gas, food & beverage, and distilled spirits. Responsibilities include: • The Staff Instrumentation & Controls Engineer will be responsible for leading multi-disciple projects, including directing and monitoring support staff., • Helping develop P&IDs and creating typical electrical and instrument design documents., • Specifying process instrumentation including level, pressure, flow, temperature, and other related instrumentation., • The Staff Instrumentation & Controls Engineer will prepare complete design packages including a scope of work that meets design intents and customer expectations. Minimum requirements: • Bachelor's degree or higher from an ABET-accredited engineering program with a minimum of 10 years of related work experience, or a bachelor's degree or higher from an ABET-accredited engineering technology program with 12 years of relevant experience., • Ability to travel domestically or internationally to client locations, vendor shops, and project sites. Travel may be up to 10%, • Experience required in chemical, refinery, or food & beverage industries for new or retrofit projects., • Must comply with drug-free workplace requirements., • Must be able to obtain a Transportation Worker Identification Credential (TWIC) and pass any required background checks., • Performs work in a safe manner in accordance with C&I and client requirements., • Must be able to meet the physical demands of the job, which could include exposure to the weather, heights, small spaces, noise, etc. while working on job sites., • Professional Engineer License, • Industry work experience, • Leadership experience · Employee Owned · ESOP · 401k · Health Insurance · Dental & Vision · Optional 4-day Work Weeks · Salaried Employees are Paid Straight Time for Hours Worked Over 40 Our core values include: • People: Building our company on diversity, development, and experience, • Quality: Doing the right things right, • Ownership: Holding ourselves and our teams accountable for results C&I is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, physical or mental disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Requirements:

AutoCAD Designer / Drafter Overview We are seeking a detail-oriented AutoCAD Designer/Drafter to create accurate technical drawings and plans that support project design, development, and execution. This role collaborates closely with engineers, architects, and project managers to translate concepts and specifications into precise, buildable drawings. Key Responsibilities * Create, modify, and maintain detailed 2D and/or 3D drawings using AutoCAD * Prepare construction documents, layouts, schematics, and shop drawings * Review drawings for accuracy, completeness, and compliance with standards * Incorporate redlines, field changes, and design updates into existing plans * Coordinate with engineering, architectural, and project teams to resolve design issues * Ensure drawings comply with industry standards, codes, and client requirements * Maintain organized drawing files and documentation * Assist with as-built drawings and project closeout documentation Qualifications * Proficiency in AutoCAD (2D required; 3D a plus) * 2+ years of experience in drafting or design * Strong understanding of technical drawings and construction documentation * Ability to read and interpret blueprints, specifications, and sketches * Excellent attention to detail and time management skills * Strong communication and collaboration abilities Preferred Qualifications * Experience in architecture, engineering, construction, or manufacturing environments * Knowledge of Revit, Civil 3D, or other CAD/BIM software * Associate degree or certification in Drafting, Design, or related field What Success Looks Like * Accurate, high-quality drawings delivered on time * Smooth coordination between design and execution teams * Minimal rework due to errors or omissions

Confer with supervisory personnel, owners, contractors, or design professionals to discuss and resolve matters such as work procedures, complaints, or construction problems. Obtain as-builts from field; request CAD from engineering. Familiarity with AutoCAD, and other electrical, technical, or const

Job Description iLogic Design Specialist Zing Recruiting is partnering with a leading sports facility design, fabrication, and construction company in Louisville, KY, to hire a iLogic Design Specialist. This role focuses on leveraging 3D design technology to deliver fabrication-ready part files, manage parametric parts libraries, and improve design automation processes. This is a salaried position with a starting pay of $75,000 and offers benefits such as medical, dental, vision, 401K, and more. iLogic Design Specialist Job Summary: * Pay: Starting at $75,000 annually * Location: Louisville, KY * Hours: Full-time, 40 hours/week; occasional overtime may be required to meet project needs iLogic Design Specialist Responsibilities: * Create, maintain, and organize custom Autodesk Inventor parts and assemblies within Vault for fabrication teams * Lead development of Inventor & Vault processes with automation (iLogic, PowerShell, CoolOrange, etc.), including creation of parametric parts and assemblies * Maintain standard design processes for internal and external teams, supporting manufacturing workflows * Implement Inventor & Vault to streamline design-to-manufacturing information transfer * Integrate design data into ERP systems for reporting purposes * Participate in cross-functional team meetings and contribute to design process improvements * Develop knowledge of products and suggest value engineering improvements * Communicate design automation processes to ensure clear understanding across teams iLogic Design Specialist Qualifications: * Bachelor’s degree (manufacturing, construction, architecture, engineering) or equivalent combination of education and experience * Certificate in Computer Aided Drafting and Design preferred * Proven experience in designing automation and workflows for parametric assemblies and parts * Understanding of manufacturing/design practices and structural framing requirements * Experience managing software implementation (Inventor or similar) for design/manufacturing workflows * Self-starter, detail-oriented, well-organized, and able to prioritize tasks effectively * Strong interpersonal and team collaboration skills * Proficiency with Autodesk Inventor, Vault, and CAD; familiarity with Bluebeam Revu and Microsoft Office * Passion for technology and continuous personal/professional growth iLogic Design Specialist Physical Requirements: * Prolonged periods sitting and working on a computer Why Zing? * Medical, Dental, Vision & Life insurance available * 401K available after reaching hours worked requirement * Direct Deposit Programs * Opportunities for professional growth in a collaborative, innovative environment Zing Recruiting, a leader in the staffing industry for the past 33 years, continues our vision of ‘linking’ communities through employment. Zing Recruiting’s dedication to the safety, health & well-being of our associates, clients, and communities remains our #1 priority. Zing Recruiting is proud to be an EEOE, M/F/D/V, and we are committed to diversity both in practice and spirit at all levels of the organization and encourage individuals with disabilities to apply. Accommodations are available for those in need. #ZINGSE #LI-PW1 #ZINGZIP Company DescriptionZing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.Zing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.

Job Description *This position will report to our New Albany office. Our team is looking for a qualified, self-motivated Project Manager experienced in Land Development. The ideal candidate will have experience managing all aspects of residential and/or commercial land development including conducting due diligence, evaluating site conditions, working with municipalities & reviewing agencies, and overseeing public and private utility contractors, site contractors & landscape contractors. The Land Development Project Manager supports the creation of the site development budget and required internal reporting and documentation for all land development projects. If you want to work in a remarkable work culture where everyone treats one another with the highest level of respect and enjoys being part of one of the most progressive and friendly engineering firms in the Midwest, then we would love for you to apply! WHAT YOU’LL DO • Perform and supervise engineering work related to the design and permitting of site engineering / land development projects., • Interpret, organize, execute and coordinate engineering projects with unique and complex criteria., • Supervise the engineering work of a project team, including other engineers and CAD technicians., • Providing site engineering expertise to other individuals and work groups within the firm., • Scope work and write proposals., • Manage budgets, invoice preparation and forecasting., • Bachelor’s degree in civil engineering., • 3-5+ years of relevant, progressive experience in the civil engineering industry, with an emphasis on land development projects., • Professional Engineering License in Indiana (or the ability to obtain licensure in Indiana through reciprocity)., • Strong oral and written communication skills., • Ability to think critically, manage time and problem solve., • Strong data analysis and organizational skills., • Complete competence working well independently and on a team. HWC Company Culture is proud of its employee compensation packages and profit sharing. Over the last decade, HWC has given annual raises and performance-based bonuses and recognition unmatched by competitors! • Named one of the Best Places to Work in Indiana by the Indiana Chamber of Commerce in 2016 – 2025., • HWC offers Flexible work environment and schedules: hybrid, and full-time in office work environments are offered dependent upon position / situation (ability to work from home)., • Highly competitive salary along with performance-based bonuses and recognition., • Paid time off available upon hire and at the start of each new year., • Competitive pay and benefits. ABOUT HWC HWC Engineering is a full-service consulting engineering firm that provides water, wastewater, stormwater, transportation, inspection, site engineering, survey, landscape architecture and planning services to both the public and private sectors. Founded in 1989 in Terre Haute, Indiana, HWC has additional offices in Indianapolis, Lafayette, Muncie, and New Albany, allowing us to provide professional engineering services to clients throughout Indiana and the Midwest. HWC is an Equal Opportunity Employer (EEO) that does not discriminate on the basis of race, religion, age, gender or any status protected by federal, state or local laws. All employment decisions are based on qualifications, merit, competence and performance.

Job DescriptionDescription: JOB SUMMARY Experienced technical lead specializing in the design and development of parcel sortation and material handling systems. Adept at leading customer bids and projects from concept through execution, whether starting from a blank slate or refining existing layouts. Combines deep knowledge of automation and sortation technologies with a strong commitment to meeting site-specific requirements and strict customer specifications.--- ESSENTIAL FUNCTIONS • Serve as the technical lead on assigned bids and projects, ensuring proposed system designs align with customer requirements, safety regulations, and internal engineering standards., • Design automated parcel sortation and material handling system layouts for proposals, from conceptual planning through to detailed designs., • Collaborate with internal project teams to maintain consistency in design practices and ensure compliance with company engineering standards., • Engage directly with customers to confirm all site-specific, project, and specification requirements are accurately captured and addressed., • Create and review detailed engineering designs, system calculations, and layout drawings for parcel handling systems., • Develop comprehensive drawing sets in AutoCAD and/or 3D models using Inventor to support proposals and project planning., • Generate detailed manifests outlining required demolition, modifications, and new equipment necessary for project execution., • Analyze 3D models against point cloud scans to validate accuracy and identify discrepancies., • Produce detailed clash detection reports, highlighting potential issues requiring field service attention., • Communicate effectively across cross-functional teams to ensure all technical requirements are captured for accurate estimating and bid development., • Coordinate design and estimating efforts across internal departments and external partners, acting as the primary technical point of contact., • Provide expert technical guidance throughout project planning, system installation, and commissioning phases., • Contribute to the development, maintenance, and enforcement of engineering tools, processes, and standards for the systems engineering discipline., • Perform additional engineering, estimating, and project-related tasks as needed to support business objectives.Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Proficiency in Autodesk AutoCAD, Inventor, Navisworks, and BIM., • Strong knowledge of material handling mechanical and system-level engineering principles, including equipment, speed, flow rates, and integration of subsystems., • Ability to review and apply detailed customer specifications., • Proficiency in Microsoft Office (Excel, Outlook, Project)., • Ability to apply independent engineering judgment, cost analysis, and problem-solving skills., • Ability to produce accurate, high-quality design packages., • Detail-oriented, organized, and capable of balancing multiple bids and project priorities., • Strong organizational skills; capable of balancing technical design, estimating, and project coordination responsibilities., • Strong communication skills with the ability to interface effectively with customers, vendors, and internal teams., • Ability to lead design and estimating efforts, and coordinate across disciplines to achieve project and proposal goals. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor’s degree, or equivalent in years of experience., • 5+ years’ experience in conveyance, material handling, or similar systems engineering, • Proficiency in CAD Software (AutoCAD, Inventor, or similar)., • Experienced use of Microsoft Office (Excel, Outlook, Project)., • Legally authorized to work in the United States.

Job Description Senior Project Engineer – Engineered Solutions Location: Louisville, KY Salary Range: $120,000 – $125,000 Overview Support the cross-functional delivery of engineered-to-order (ETO) solutions, partnering with sales, vendors, and customers. Lead the design, estimation, and management of custom sanitary processing systems, ensuring projects are completed on time, within scope, and aligned with customer expectations. Key Responsibilities * Conceptualized and designed large-scale sanitary manufacturing and cleaning systems for food, beverage, dairy, personal care, or pharmaceutical industries. * Evaluated customer opportunities with the sales team to develop tailored solutions that align with business objectives. * Prepared engineering documentation using CAD tools, including process flow diagrams, P&IDs, equipment layouts, general assemblies, and 3D models. * Developed cost estimates and technical proposals, assisting sales in presenting solutions to customers. * Served as both project manager and design engineer for complex custom projects, overseeing technical performance, quality, cost, and scheduling. * Led technical design reviews and acted as the primary on-site contact for installations and subcontractor coordination. * Managed scope changes, issued change orders, and developed full project documentation and turnover packages. * Communicated regularly with internal leadership and maintained strong cross-department relationships. * Mentored team members and promoted continuous improvement in engineering practices. * Applied relevant industry standards and stayed current with new technologies and integration strategies. * Coordinated with third-party partners, vendors, and suppliers throughout the project lifecycle. * Ensured safety protocols and certifications were maintained and promoted both in the field and in-house. * Performed other duties as assigned. Qualifications * Bachelor's degree in Mechanical or Chemical Engineering (Master's preferred). * 10+ years of experience with engineered-to-order or project-based custom systems. * PE license preferred. * Strong background in sanitary fluid processing and related industries. * Proficient in AutoCAD, SolidWorks, or similar design/drafting tools. * Ability to create and interpret P&IDs. * Skilled in project management, cost estimation, proposal development, and customer engagement. * Proficient in Microsoft Office, ERP systems, and project management tools. * Willing to travel up to 35% to customer and vendor locations. * Comfortable in a culture that values collaboration, accountability, and adaptability.

Job DescriptionDescription: JOB TITLE: Mechanical Project Engineer REPORTS TO: Director, Mechanical Engineering JOB STATUS: Full Time FLSA STATUS: Exempt DATE: April 2025 JOB SUMMARY: The Mechanical Project Engineer will play a critical role in the design, organization, deployment, and leadership of baggage handling systems and components. You will collaborate successfully with stakeholders including project managers, principal engineers, engineering designers and design engineers, other engineering disciplines, procurement, and field services to complete baggage handling projects successfully. You will focus on safe, high-quality output, on schedule and on budget. Our Mechanical Project Engineer would be responsible in part for overall ownership, design, and supervision of a project, based on customer specifications and as-sold information. You would understand the system fully and make design decisions, work with the customer to ensure their needs are fully met, requisitioning all applicable materials, and lead the mechanical engineering team on a project. You will direct the creation of comprehensive, detailed installation and component level drawing packages per customer specifications and field installation team requirements. ESSENTIAL FUNCTIONS: • Aid in design of custom baggage handling systems using CAD software (2D AutoCAD, 3D Inventor)., • Perform engineering calculations, such as horsepower and speeds., • Collaborate with internal stakeholders, such as project management, procurement, field services, and other engineering disciplines to ensure mechanical engineering is aligned fully with the organization., • Represent the company appropriately during detailed design reviews and other collaborative participation with customers and consultants., • Work together with vendors to ensure adherence of design and quality., • Lead a team of designers, design engineers, and lead designers., • Track the project against schedule, scope, and budget., • Create budgets and forecasts for both cost and hours., • Identify potential issues, provide efficient solutions, and make decisions when required., • Create and maintain equipment Manifests and other engineering documentation., • Review detailed field installation drawings containing detail for customer approval and field installation ease., • Ensure all designs comply with specifications and standards., • Lead design reviews and other regular meetings., • Provide support during fabrication and construction, both in office and on-site as required. WORK ENVIRONMENT: • Office primarily, with occasional field visits., • Up to 20% travel may be required. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • High productivity in office., • Sitting for prolonged periods of time., • Repetitive typing/data entry., • Lifting up to 20 pounds. WORK SCHEDULE: This position works in office. General office hours are M-F, 7a-4p or 8a-5p. Working hours may vary to meet project requirements. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Excellent leadership and delegation skills., • Ability to read and understand customer specifications, engineering drawings, Bills of Material, and equipment Manifests., • Detail oriented, organized, and quality driven., • Ability to multi-task and change focus rapidly., • Critical thinker and problem-solver., • Self-starting instincts and motivation to work independently., • Capable of handling stress in a fast-paced, deadline driven environment., • Excellent verbal and written communication skills. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor’s degree, or equivalent in years of experience., • 5+ years’ experience in conveyance, construction, or other system-level engineering functions, or relevant project engineering experience., • Knowledge of conveyor systems, specifically baggage handling, is a plus., • Proficiency in CAD Software (AutoCAD, Inventor, or similar)., • Experienced use of Microsoft Office (Excel, Outlook, Project), • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed.

Job DescriptionDescription: C&I Engineering is looking for a talented and driven individual to join our team! About the opportunity: Senior Power Engineer We are currently seeking a full-time Senior Power Engineer in our Louisville, KY office to help us achieve our company mission. This person will be part of the Electrical Engineering team, which is responsible for developing designs for electrical/power systems and performing a variety of computer-based modeling, design, engineering, and planning tasks on projects. C&I is a full-service engineering design firm providing engineering/design/project management, and procurement services to various clients in oil & gas, food & beverage, and distilled spirits. Responsibilities include: • The Senior Power Engineer is responsible for designing electrical equipment for oil & gas, petrochemical, and other related facilities., • Design industrial power distribution systems, including equipment specifications, protection schemes, load analysis, fault, and coordination studies., • Performs electrical engineering calculations, including load studies, voltage drop calculations, wire and conduit sizing, and motor sizing., • Bachelor's degree or higher from an ABET-accredited engineering program with a minimum of 6 years of related work experience, or a bachelor's degree or higher from an ABET-accredited engineering technology program with 8 years of relevant experience., • Ability to travel domestically or internationally to client locations, vendor shops, and project sites. Travel may be up to 10%., • Must comply with drug-free workplace requirements., • Must be able to obtain a Transportation Worker Identification Credential (TWIC) and pass any required background checks., • Performs work in a safe manner in accordance with C&I and client requirements., • Must be able to meet the physical demands of the job, which could include exposure to the weather, heights, small spaces, noise, etc., while working on job sites., • Professional Engineer License, • Industry work experience, • Leadership experience, • Employee Owned, • ESOP, • 401k, • Health Insurance, • Dental & Vision, • Optional 4-day Work Weeks, • People: Building our company on diversity, development, and experience, • Quality: Doing the right things right, • Ownership: Holding ourselves and our teams accountable for results, • Service: Understanding our partnership and providing valued solutions Meet most but not all requirements? At C&I, we are dedicated to fostering a diverse and inclusive community that celebrates dedication and passion as much as past experience. If you are excited about this role and joining our team, we encourage you to still apply! You could be the perfect fit for this (or another) role. C&I is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, physical or mental disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Requirements:

Job Description Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking a Permit Supervisor (Drafting) who plays a critical role in managing the permitting workflow and ensuring compliance with all applicable Federal, State, County, and Local regulations. This role requires advanced expertise in AutoCAD principles and standards, as well as Rights-of-Way permitting. The Supervisor is expected to lead the technical and administrative processes involved in the acceptance, preparation, drafting, review, and approval of permit drawings, supporting efficient and compliant project execution. Responsibilities • Oversee daily operations of the CAD team, including workload allocation, priority setting, and one-on-one meetings., • Provide constructive feedback, conduct performance evaluations, and create career development plans., • Lead hiring, onboarding, and team-building initiatives to foster a high-performing culture., • Develop, document, and enforce CAD standards covering layers, naming conventions, annotations, plotting protocols, and file structures., • Maintain the CAD Standards Manual and conduct regular audits to ensure compliance., • Implement drawing checklists, redlining/review cycles, and approval workflows to ensure accuracy and consistency., • Ensure compliance with industry standards such as NCS, ISO 128, and ASME Y14.5., • Identify process inefficiencies and apply lean methodologies and process mapping for continuous improvement., • Lead automation efforts using tool palettes, LISP routines, sheet set workflows, and custom macros., • Strategically plan resources and estimate drafting hours to align with project timelines., • Monitor KPIs such as on-time delivery, rework rates, and first-pass approval; implement corrective actions as needed., • Collaborate with engineers, architects, and project managers to align scopes, resolve design conflicts, and manage changes., • Maintain accurate drawing revisions and change logs for stakeholder visibility., • Curate and maintain standardized blocks, dynamic blocks, detail libraries, templates, and plot styles., • Ensure version control and accessibility of shared content across teams and locations., • Develop and deliver training programs, lunch-and-learns, SOPs, and reference materials to upskill the team., • Provide advanced CAD support and coordinate with IT to resolve technical issues., • Define structured project folders, naming conventions, archiving protocols, and backup/versioning practices., • Manage data integrity and access permissions within PDM/CDE environments., • Plan and coordinate software upgrades (e.g., AutoCAD), licensing, and feature testing., • Perform other related duties as assigned by management. Qualifications • 6+ years of professional CAD drafting/design experience, including 2+ years in a lead or supervisory role managing CAD teams and workloads., • Expert-level AutoCAD proficiency: dynamic blocks, xrefs, Sheet Set Manager, fields, parametric constraints, paper/model space best practices, and CTB/STB plotting., • Proven CAD standards development and enforcement: templates, layers/naming per NCS or equivalent, annotation styles, title blocks, and periodic standards audits., • Strong QA/QC capability: drawing checklists, redline/review workflows, approval gates, and familiarity with relevant codes/standards (e.g., ISO 128, ASME Y14.5/GD&T), • Automation/customization skills: AutoLISP/macros, and/or .NET/C#/Python scripting for tooling, batch routines, and productivity improvements., • Working knowledge of adjacent platforms and interoperability: Revit, Civil 3D, Plant 3D, Navisworks, IFC/DGN/DWG exchange, and coordinate systems., • Document and data control expertise: versioning, naming conventions, libraries (blocks/details), and experience with PDM/EDMS tools (e.g., Autodesk Vault, ProjectWise), • People leadership and coaching: onboarding, mentoring, performance feedback, conflict resolution, and running stand-ups and 1:1’s., • Project management fundamentals: scoping CAD tasks, estimating hours, scheduling, prioritizing multi-project pipelines, and managing change control., • Clear communicator with strong stakeholder skills: cross-discipline coordination with engineering/field teams, and ability to author SOPs, training materials, and reports for leadership. Shift is full-time Monday – Friday between the hours of 8:00 am – 5:00 pm PST. Must be flexible and willing to work outside normal business hours as necessary. Benefits: healthcare, retirement, paid leave (e.g., sick leave, PTO, company holidays), life insurance, AD&D, short-term disability, FSA, education reimbursement, wellness reimbursement, and employee assistance program (EAP).

Job Description Senior Civil Project Engineer JQOL is seeking a Senior Civil Project Engineer to support and lead civil engineering design efforts across Indiana and Kentucky. We are looking for a dynamic and driven professional to help shape the future of our growing company. This position offers the opportunity to lead multidisciplinary teams, oversee high-impact projects, and play a key role in client engagement and business development. The successful candidate will be responsible for the delivery and management of civil engineering projects from concept through construction, ensuring design excellence, financial performance, and client satisfaction. This is a leadership-track position for engineers with demonstrated experience managing both technical work and people. Key Responsibilities • Serve as project manager on complex civil/site development projects across multiple markets., • Lead and mentor project teams, including junior engineers and CAD designers, ensuring high-quality deliverables and efficient resource allocation., • Oversee project planning, scheduling, budgeting, and financial tracking to meet performance goals., • Maintain strong client relationships and support new business development efforts through proposals, presentations, and networking., • Provide technical oversight and guidance on engineering design, including grading, stormwater management, utilities, erosion control, and permitting., • Review plans, specifications, calculations, and technical reports to ensure compliance with applicable standards and regulations., • Bachelor's degree in Civil Engineering required; Master's degree a plus., • Minimum 8+ years of progressively responsible experience in civil/site design and project management., • Active Professional Engineer (PE) license in Indiana and/or Kentucky., • Proven leadership experience in managing staff, budgets, and client accounts., • Proficiency with AutoCAD Civil 3D and a strong desire to stay current with design tools and software trends., • Advanced understanding of permitting processes, agency coordination, and municipal design standards., • Strong written and verbal communication skills with the ability to lead meetings and present to clients or public entities. Position is open in either our Indianapolis, IN or Louisville, KY office.

Job DescriptionDescription: JOB TITLE: Mechanical Designer Engineer Co-Op REPORTS TO: Manager, Mechanical Engineering JOB STATUS: Full Time FLSA STATUS: Non Exempt DATE: September 2025 JOB SUMMARY: The Mechanical Engineer Co-Op is responsible for assisting in the creating of mechanical engineering drawings and designs specific to the parcel industry. The Mechanical Designer Engineer Co-Op works under the day-to-day direction of the Principal Engineer and interfaces with other engineering staff to ensure designs are functional, efficient and safe. ESSENTIAL FUNCTIONS: · Assists in producing mechanical installation drawings for parcel handling projects. · Collaborate with project teams to ensure consistent design practices. · Assists in the preparing AutoCAD drawings sets for permits, installation and as-built conditions. · Other responsibilities as needed. WORK ENVIRONMENT: · Office primarily, with occasional field visits. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. · High productivity in office. · Sitting for prolonged periods of time. · Repetitive typing/data entry. WORK SCHEDULE: This position works in office. General office hours are M-F, 7a-4p or 8a-5p. Working hours may vary to meet project requirements. It is the policy of Sortation Labs, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, Sortation Labs, LLC will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: · Basic knowledge in AutoCAD · Has knowledge of commonly used concepts, practices, and procedures with controls · Proficiency in Microsoft · Ability to follow directions · Detail-oriented and organized; and capable of performing work that is consistent and accurate · Critical thinker and problem-solver · Self-starting instincts and strong analytical skills · Excellent verbal and written communications skills EDUCATION, EXPERIENCE AND QUALIFICATIONS: · Must be actively pursuing a Bachelor’s or Master’s degree in mechanical design engineering. · AutoCAD proficient (2D and 3D CAD design software) · Experienced use of Microsoft Office (Excel, Outlook) · Legally authorized to work in the United States

Job Description Paradigm is seeking a Senior Mechanical Engineer with (10-15) plus years of experience in building and facility/site mechanical HVAC and building plumbing consulting engineering. This position will work with a team of engineers and architects to design the mechanical and plumbing systems for buildings primarily at VA Medical Centers throughout the United States, in addition to design for other federal and private project work. The ideal candidate has federal healthcare facility mechanical systems experience, is able to travel to other states as needed for site investigations and construction observations, is self-motivated, has excellent communication both written and verbal skills, is proficient in Auto-Cad and Windows software as well as mechanical engineering HVAC design software. This person must be able to design and manage multiple projects simultaneously. Desired Experience: • 10-15 plus years of experience as a mechanical engineer (Federal Healthcare Preferred), • PE license, • Project Management Experience, • Interfacing with clients (VA Medical Centers), • Cooling and heating systems for VA Medical Centers, • Plumbing Design for VA Medical Centers, • AutoCAD, • Read and interpret blueprints and as-built drawings., • Attend meetings and project confidence with clients (Sometimes out of state)., • Provide guidance and leadership to staff engineers as to the appropriate HVAC solutions on projects in various stages of design., • Review submittals (shop drawings, etc.) to determine conformance with contract documents., • Evaluate, select and apply standard engineering techniques, procedures, and criteria to perform assigned tasks, • Coordinate with other engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information, • Research and analyze customer design proposals specification, manuals, and other data to evaluate the feasibility, cost, and maintenance requirements of designs or applications, • Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications, • Research, design, and evaluate mechanical products, equipment, systems, and processes to meet requirements, apply knowledge of engineering principles, • Provide feedback to design engineers on customer problems and needs, • Plumbing, • Construction, • Energy, • Heating, • Engineering, • Design, • Air Conditioning, • Submittals, • AutoCAD, • Strong work ethic, • Responsible

Job DescriptionDescription: JOB TITLE: Mechanical Principal Engineer REPORTS TO: Director, Mechanical Engineering JOB STATUS: Full Time FLSA STATUS: Exempt JOB SUMMARY: The Mechanical Principal Engineer will play a critical role in the specification knowledge, training, onboarding, decision making, workflow development, and general upkeep of the mechanical engineering department. You will collaborate successfully with stakeholders including project managers, project engineers, engineering designers and design engineers, other engineering disciplines, procurement, and field service, as well as heavily with the customer, to ensure that our department decisions align with customer requirements, field services needs, industry standards, and company best practices. Our Mechanical Principal Engineer would be responsible for being a main point of contact for the company for a customer in mechanical engineering. You would understand baggage handling systems fully, comprehend customer specifications and be able to influence future specification changes, and create standards for both ways of working and internal specifications. You will advise project engineers, designers, and other engineering disciplines on a consistent, quality-driven, and efficient way to work. ESSENTIAL FUNCTIONS: • Design and review internal process documentation, templates, work instructions, SOPs, and other ways of working., • Dictate internal standards, focusing on standardization., • Develop internal tools and calculation sheets for use by the organization., • Lead and guide project engineers and designers on an advisory basis, focusing on consistency, adherence to customer specifications and requirements, and high-quality output., • Understand baggage handling systems fully and make system level design decisions based on your knowledge., • Perform and develop complex engineering calculations, such as horsepower calculations and speeds, and understand the mechanics behind the calculations., • Collaborate with internal stakeholders, such as project management, procurement, field services, and other engineering disciplines to ensure mechanical engineering is aligned fully with the organization., • Represent the company appropriately during collaborative participation with customers and consultants., • Work together with vendors to ensure adherence of design and quality, as well as active participation in product design to meet customer needs., • Identify potential issues, provide efficient solutions, and make decisions when required., • Create and maintain equipment Manifests and other engineering documentation., • Review detailed field installation drawings containing detail for customer approval and field installation ease, and assist with dictating internal standards for drawings., • Office primarily, with occasional field visits. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • High productivity in office., • Sitting for prolonged periods of time., • Repetitive typing/data entry. This position works in office. General office hours are M-F, 7a-4p or 8a-5p. Working hours may vary to meet project requirements. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Excellent leadership and delegation skills., • Ability to read and understand customer specifications, engineering drawings, Bills of Material, and equipment Manifests., • Ability to understand complex engineering calculations., • Detail oriented, organized, and quality driven., • Ability to multi-task and change focus rapidly., • Critical thinker and problem-solver., • Self-starting instincts and motivation to work independently., • Excellent verbal and written communication skills. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor’s degree, or equivalent in years of experience., • 7+ years’ experience in conveyance., • Knowledge of conveyor systems, specifically baggage handling, is required., • Proficiency in CAD Software (AutoCAD, Inventor, or similar)., • Experienced use of Microsoft Office (Excel, Outlook, Project), • Legally authorized to work in the United States, • Ability to obtain airport security clearance as needed.

Job DescriptionThis role requires the ability to work lawfully in the U.S. without employment-based immigration sponsorship, now or in the future. JOB SUMMARY The HFC Designer I generates broadband system designs in the most cost-effective manner while maintaining Charter Communications’ and the department’s standards and specifications. Under direct supervision/guidance, prepares and maintains detailed engineering and design drawing files and schematics using Computer Aided Design (CAD) or other spatial or GIS software platforms. Works closely with cross-departmental boundary partners; Tech Ops, Construction and Engineering in the facilitation of design/engineering services providing necessary information, including strand maps, design maps, BOMs, charts, graphs, and sketches of vertical details, and provide SOWs in a timely basis. Helps develop and maintain Charter Communications; broadband HFC design and digitizing standards. RESPONSIBILITIES • Actively and consistently support all efforts to simplify and enhance the customer experience., • Design basic HFC broadband plant extensions utilizing various design software programs., • Utilize various CAD/GIS software programs (Bentley, Spatial, AutoCAD, and Smallworld) to digitize base, strand, coax, fiber designs, fiber splicing documentation and BOMs in accordance with the Charter Communications digitizing standards and specifications., • Conduct engineering change orders to ensure that all related work is complete and accurate and all related documentation is acquired and routed properly., • Perform quality control checks on field mapping, field notes and/or map digitizing to ensure all specifications are met., • Provide technical guidance and QC of contractor work in support of existing specifications across various architecture concepts., • Document and digitize construction as-builds for project reconciliation as required., • Contribute to project coordination and perform administrative functions by maintaining associated records, providing reports as necessary and processing related invoices., • Schedule work assignments, monitor project work flow and maintain accurate weekly production reports., • Make copies of system prints or engineering documents as required., • Maintain digital plotter, engineering copier/scanner and other departmental equipment., • All other duties as assigned. REQUIRED SKILLS/ABILITIES/KNOWLEDGE Ability to read, write, speak and understand English Well-versed in HFC architectures, HFC Network Design Specifications and symbology Understanding of CATV standards and terminology, HFC, Fiber-to-the-Home (FTTH) and Passive Optical Network (PON) architectures Basic knowledge of CAD/Spatial applications such as MicroStation/BentleyComms, Spatial, AutoCAD and/or Smallworld design and digitizing software programs Ability to handle multiple projects at one time with accuracy Working knowledge of MS Office such as Excel, Word and PowerPoint Must have strong computer skills Must have good verbal and written communication skills Must be able to manage multiple priorities REQUIRED EDUCATION High School Diploma or equivalent education and experience College level math (algebra, trigonometry, calculus) or demonstrated analytical ability preferred REQUIRED RELATED WORK EXPERIENCE AND NUMBER OF YEARS Drafting/design experience or coursework - 1+ #zrfo2 #LI-BC1 EDS100 2025-66078 2025 Here, our employees don’t just have jobs, they're building careers. That’s why we offer a comprehensive pay and benefits package that rewards employees for their contributions to our success, supporting all aspects of their well-being at every stage of life. A qualified applicant’s criminal history, if any, will be considered in a manner consistent with applicable laws, including local ordinances. Get to Know Us Charter Communications provides superior communication and entertainment products for residential and business customers through the Spectrum brand. Our offerings include Spectrum Internet®, TV, Mobile and Voice. Beyond our connectivity solutions, we also provide local news, programming and regional sports via Spectrum Networks and multiscreen advertising solutions via Spectrum Reach. When you join our team, you’ll be keeping our customers connected to what matters most in 41 states across the U.S. Watch this video to learn more. Grow Your Career Here We’re committed to growing a workforce that reflects the customers and communities we serve – providing opportunities for employment and advancement to all team members. Spectrum is an Equal Opportunity Employer, including job seekers with disabilities and veterans. Learn about Life at Spectrum. REQUIRED SKILLS/ABILITIES/KNOWLEDGE Ability to read, write, speak and understand English Well-versed in HFC architectures, HFC Network Design Specifications and symbology Understanding of CATV standards and terminology, HFC, Fiber-to-the-Home (FTTH) and Passive Optical Network (PON) architectures Basic knowledge of CAD/Spatial applications such as MicroStation/BentleyComms, Spatial, AutoCAD and/or Smallworld design and digitizing software programs Ability to handle multiple projects at one time with accuracy Working knowledge of MS Office such as Excel, Word and PowerPoint Must have strong computer skills Must have good verbal and written communication skills Must be able to manage multiple priorities REQUIRED EDUCATION High School Diploma or equivalent education and experience College level math (algebra, trigonometry, calculus) or demonstrated analytical ability preferred REQUIRED RELATED WORK EXPERIENCE AND NUMBER OF YEARS Drafting/design experience or coursework - 1+ #zrfo2 Company DescriptionCharter Communications is known in the United States by our Spectrum brands, including: Spectrum Internet®, TV, Mobile and Voice, Spectrum Networks, Spectrum Business and Spectrum Reach. When you join us, you’re joining a strong community of 95,000 employees working together to serve nearly 32 million customers in 41 states and keep them connected to what matters most. We’re committed to growing a workforce that reflects our communities, and providing equal opportunities for employment and advancement. EOE, including disability/vets.Charter Communications is known in the United States by our Spectrum brands, including: Spectrum Internet®, TV, Mobile and Voice, Spectrum Networks, Spectrum Business and Spectrum Reach. When you join us, you’re joining a strong community of 95,000 employees working together to serve nearly 32 million customers in 41 states and keep them connected to what matters most.\r\n\r\nWe’re committed to growing a workforce that reflects our communities, and providing equal opportunities for employment and advancement. EOE, including disability/vets.

Job Description *This position will report to our New Albany, IN office. Our team is looking for a qualified, ambitious, and enthusiastic CAD Technician to support our growing Land Development team. You are an eager individual, ready to tackle a variety of site development projects that include commercial, industrial, public works, and more. You take each project from concept to construction documents, and every step requires excellent drafting skills in AutoCAD Civil 3D. You have attention-to-detail in site geometry, utilities, grading, and drainage, as well as erosion and sediment control. This position requires a collaborative team player to work with our project engineers, project managers, and project surveyors, in tackling challenges that may arise and ensuring project success. If you want to work in a remarkable work culture where everyone treats one another with the highest level of respect and enjoys being part of one of the most progressive and friendly engineering firms in the Midwest, then we would love for you to apply! WHAT YOU’LL DO • Work with the project engineer to prepare site plans for land development projects., • Collect data from engineers and use the information to create construction documents, schematics, and exhibits., • Utilize prior design experience to proactively address potential design issues., • Help the team develop and refine design and drafting standards for projects., • Practice efficiency engineering as it pertains to design selection., • Work closely with other engineering technicians and experienced engineers., • Design will be primarily within AutoCAD Civil 3D with an emphasis on road layout, mass site grading, earthwork takeoffs, and erosion and sediment control plans., • Demonstrate a wide degree of creativity and latitude., • Effectively communicate and interact with clients to ensure we are meeting their needs., • Work closely with other disciplines on multi-discipline projects., • Associates’ degree in Design Technology/CAD, • 5+ years of working experience, • Proficiency in AutoCAD Civil 3D, • Basic understanding of civil engineering design practices a plus., • Must be organized and schedule driven to work on multiple projects in various stages of design., • Ability to think critically, manage time and problem solve., • Complete competence working well independently and on a team. HWC Company Culture is proud of its employee compensation packages and profit sharing. Over the last decade, HWC has given annual raises and performance-based bonuses and recognition unmatched by competitors! • Named one of the Best Places to Work in Indiana by the Indiana Chamber of Commerce in 2016 – 2025; 10 years in a row!, • HWC offers Flexible work environment and schedules: remote work, hybrid in-office, and full-time in office work environments are offered dependent upon position / situation (ability to work from home)., • Highly competitive salary along with performance-based bonuses and recognition., • Paid time off available upon hire and at the start of each new year., • Competitive pay and benefits. ABOUT HWC HWC Engineering is a full-service consulting engineering firm that provides water, wastewater, stormwater, transportation, inspection, site engineering, survey, landscape architecture and planning services to both the public and private sectors. Founded in 1989 in Terre Haute, Indiana, HWC has additional offices in Indianapolis, Lafayette, Muncie, and New Albany, allowing us to provide professional engineering services to clients throughout Indiana and the Midwest. HWC is an Equal Opportunity Employer (EEO) that does not discriminate on the basis of race, religion, age, gender or any status protected by federal, state or local laws. All employment decisions are based on qualifications, merit, competence and performance.

Job DescriptionDescription: JOB SUMMARY: Designs layouts and equipment for parcel sortation and material handling systems. This role involves developing concepts, performing engineering calculations, creating specifications, and collaborating with internal teams. Requires Bachelors of Science in Mechanical Engineering. ESSENTIAL FUNCTIONS: • Develop detailed mechanical engineering designs and calculations for parcel handling projects., • Produce mechanical installation drawings, fabrication drawings, and supporting documentation., • Collaborate with project teams to ensure consistent design practices and compliance with engineering standards., • Prepare AutoCAD drawing sets for permits, installation, and as-built conditions., • Support the review and approval of submittals, vendor drawings, and design changes., • Provide technical input during project planning, installation, and commissioning phases., • Other engineering responsibilities as needed. WORK ENVIRONMENT: • Office primarily, with occasional field visits. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • High productivity in office., • Sitting for prolonged periods of time. This position works in office. General office hours are M-F, 8a-5p. Working hours may vary to meet project requirements. It is the policy of Sortation Labs, LLC to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, Sortation Labs, LLC will provide reasonable accommodation for qualified individuals with disabilities. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Proficiency in AutoCAD (2D and 3D CAD design software)., • Strong knowledge of mechanical engineering principles, including materials, mechanics, and manufacturing methods., • Proficiency in Microsoft Office (Excel, Outlook)., • Ability to apply independent engineering judgment and problem-solving skills., • Ability to produce accurate, high-quality drawing and design packages., • Detail-oriented, organized, and capable of balancing multiple project priorities., • Bachelor of Science degree in Mechanical Engineering required or equivalent work experience, • 0–3 years of engineering experience (internships or co-op experience considered)., • Proficiency in AutoCAD (2D and 3D)., • Experience with Microsoft Office (Excel, Outlook)., • Legally authorized to work in the United States.

Job Description Process/Project Engineer Location: Louisville, KY Salary Range: $105,000 – $115,000 Primary Purpose Work cross-functionally with the division's outside sales team to solve customer problems and address customer needs through the delivery of cost-effective engineered-to-order solutions, including project management, project estimation, system design, and installation support. Key Responsibilities * Design small to mid-sized sanitary manufacturing and cleaning processes with assistance from more experienced engineers. * Evaluate customer opportunities with Outside Sales and develop recommendations to solve customer needs through estimating, design, and delivery of customized solutions. * Utilize CAD to prepare engineering drawings, including process flow diagrams, P&IDs, equipment layouts, general assembly drawings, and solid models, following accepted engineering principles. * Understand customer requirements, develop project cost estimates, and create customer proposals with assistance from senior engineers. * Deliver small to mid-sized projects as both project manager and design engineer to meet customer requirements and internal performance, quality, cost, and schedule targets. * Identify and mitigate risk factors that may prevent successful project delivery. * Contribute to and facilitate effective technical and cross-functional design reviews. * Manage onsite installations as the customer point-of-contact and lead for subcontractors; ensure projects are completed per requirements and to the customer's satisfaction. * Issue change orders when projects deviate from agreed-upon scope. * Facilitate the development of project documentation and turnover packages. * Communicate effectively with senior management and maintain positive relations with all operating groups, especially Sales. * Support and promote engineering processes while offering ideas for continuous improvement. * Build knowledge of and apply relevant industry standards to customized solutions. * Stay current on new technology and applications within the industry; meet with vendors to review available products and technology. * Interface with third-party partners, including equipment and material suppliers. * Remain up to date on safety training and certifications, promoting safe work practices on job sites and in the shop. * Promote an engaging work environment by exhibiting a positive attitude, helping where needed, and being an active team member. * Perform other duties as assigned. Qualifications * Bachelor's degree in Mechanical or Chemical Engineering (or equivalent) from an accredited institution. * Background or training in fluid processing a plus. * Experience with drafting, solid modeling, and design packages (e.g., AutoCAD, SolidWorks, Creo, Inventor) preferred. * Strong computer skills, including proficiency with Microsoft Office applications. * Ability to travel to customer and vendor facilities; approximately 35% travel required. * Must be a good cultural fit for a family-owned enterprise.

Job DescriptionDescription: JOB SUMMARY: Serves as the technical lead on customer projects, overseeing the mechanical design and ensuring successful delivery of parcel sortation and material handling systems. This role bridges engineering and project management, coordinating design activities and serving as a key point of contact for internal and external stakeholders. ESSENTIAL FUNCTIONS: • Serve as the technical lead on assigned projects, ensuring designs align with customer requirements, safety standards, and company practices., • Collaborate with project teams to ensure consistent design practices and compliance with engineering standards., • Develop detailed mechanical engineering designs and calculations for parcel handling projects., • Produce mechanical installation drawings, fabrication drawings, and supporting documentation., • Prepare AutoCAD drawing sets for permits, installation, and as-built conditions., • Coordinate design activities across internal teams and external partners, serving as a key point of contact for technical issues., • Support the review and approval of submittals, vendor drawings, and design changes., • Provide technical input during project planning, installation, and commissioning phases., • Monitor design deliverables to ensure successful project execution within scope, schedule, and budget., • Other engineering and project responsibilities as needed.Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Proficiency in AutoCAD (2D and 3D CAD design software)., • Strong knowledge of mechanical engineering principles, including materials, mechanics, and manufacturing methods., • Proficiency in Microsoft Office (Excel, Outlook)., • Ability to apply independent engineering judgment and problem-solving skills., • Ability to produce accurate, high-quality drawing and design packages., • Detail-oriented, organized, and capable of balancing multiple project priorities., • Strong organizational skills; capable of balancing technical work and project coordination responsibilities., • Strong communication skills with the ability to interface effectively with customers, vendors, and internal teams., • Ability to lead design efforts and coordinate across disciplines to achieve project goals.

Job Description Job Title Machinist/Programmer Department Production Position Type Full Time/Hourly/Non-Exempt Reports To Plant Manager Working Hours Monday-Thursday 6:00am-4:30pm Job Responsibilities: • Develop and write CNC programs using G-code or CAM software (e.g., Mastercam, EspritCAM, SolidWorks, Autodesk Fusion 360, Bobcad, GibbsCAM) based on technical blueprints and 3D CAD models., • Setting up and programming some of the highest end machine tools available, such as Okuma, Makino, DMG MORI, & DN Solutions, • Working inside a variety of different CNC controls, such as FANUC, Okuma OSP, Pro 5/6, and Siemens., • Select appropriate cutting tools, machining strategies, and parameters such as feed rates and spindle speeds., • Reading and interpreting technical blueprints & drawings using GD&T, CAD/CAM files, and design specifications to ensure accurate machining of components., • Create setup sheets and provide detailed instructions and training for CNC Machine Operators, • Monitor machine operations, make tool wear offsets as needed, and troubleshoot issues to maintain quality standards., • Load raw materials into CNC machines and set up tools for machining operations., • Using precision measuring tools such as calipers, micrometers, indicators, gage blocks, gage pins, etc., to ensure the accuracy of your work., • Holding tolerances down to .0005", • Strong technical skills in mathematics, blueprint reading, GD&T attention to detail, problem-solving abilities, and effective communication for teamwork are required., • Vocational school, apprenticeship, or Machine Tool Technology associate degree preferred., • Experienced using CAD/CAM Programming software such as Esprit, MasterCAM, Autodesk Fusion, • Experience with Fanuc, OSP, or Siemens controls are a plus!, • Experience programming & setting up 3-4 axis machining centers required. 5-axis are a plus!, • Experience programming & setting up mill-turn / multitasking machines such as an Okuma Multus/Mazak Integrex/Mori NT/NTX/CTX are a plus!, • High School graduate or G.E.D. program, • Successfully pass drug screening, • Ability to collect data, define problems, establish facts, and draw a valid conclusion., • Demonstrated ability to interpret blueprints, schematics, and technical documentation., • Demonstrated ability to perform shop math functions, including trigonometry., • Understanding of company Quality Policy and fundamentals of ISO 9001, • Ability to work with deadlines., • Good organizational skills, • Solid communication skills at all levels of the organization (written and oral), • Speak, read, and write English., • Ability to use the latest technology/software provided by the company., • A precise attention to detail, • Must have excellent sense of priorities and a self-motivator., • Must adhere to all OSHA safety rules and regulations., • Physical Demands:, • Stand, walk, push, pull, climb stairs and ladders, reach overhead and bend to the floor., • Exert up to 20 pounds of force occasionally and/or exert up to 10 pounds of force frequently., • Ability to safely lift 50 pounds., • Senses: Visual (basic color perception, peripheral and depth perception, close vision of 20 inches or less, distance vision of more than 20 feet). Required for reading blueprints and any required customer documentation., • Hearing: Ability to monitor machine sounds to identify and diagnose changes in order to take appropriate action., • Visual: Near acuity and accommodation are required for reading machine dial gauges, blueprints and precision measuring instruments used in the inspection of parts., • Working Environment/Conditions:, • Subject to moderate to high noise levels from operating machines, • Physical hazards are being exposed to moving equipment and machine parts., • Breathing fumes, dust, and mist, • Skin exposure to oils and cutting fluid., • May be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws., • Fanatical About Precision - We build correct and efficient processes, and we execute them with relentless accuracy. We avoid shortcuts because quality is on the line. Our customers and our teammates can expect precision-made products every single day., • Accountable to Each Other - We take responsibility for our actions, owning both successes and mistakes. We hold ourselves and our colleagues accountable to our standards of excellence. We all play for the same team, and every win is shared., • Challenge Accepted - We’re not afraid to try something new, to solve a problem, or to think of new ideas. We like to figure things out. We meet new tasks with enthusiasm and curiosity. Our default is YES., • Truth Tellers, Always - We are honest and ethical in all our actions. Our communications with our clients and each other are clear, timely, frank, and fair. We are empowered and obligated to voice concerns. We honor our commitments because our word is our bond. Monday-Thursday 6:00am-4:30pm

Job DescriptionDescription: JOB TITLE: Mechanical Design Engineer REPORTS TO: Manager, Mechanical Engineering JOB STATUS: Full Time FLSA STATUS: Exempt JOB SUMMARY: The Mechanical Design Engineer will play a critical role in the conceptualization, design, and development of baggage handling systems and components. You will collaborate successfully with mostly engineering stakeholders including project engineers, principal engineers, and other engineering designers and design engineers to complete baggage handling projects successfully. You will focus on safe, high-quality output, on schedule and on budget. Our Mechanical Design Engineer would be responsible in part for modeling the systems (or portions of the systems), based on customer specifications and as-sold information. You would understand the system and provide input when a more efficient design would be better suited. You will help create comprehensive, detailed installation and component level drawing packages per customer specifications and field installation team requirements. ESSENTIAL FUNCTIONS: • Design custom baggage handling systems using CAD software (2D AutoCAD, 3D Inventor)., • Develop component level equipment, assembly, weldment, and part level models and detailed drawings for fabrication., • Perform engineering calculations, such as horsepower and speeds., • Collaborate in a team setting with other engineers, and occasionally with other business units, customers, or vendors., • Identify potential issues and provide efficient solutions., • Create and maintain Bills of Material (BOMs), Manifests, and other engineering documentation., • Create detailed field installation drawings containing detail for customer approval and field installation ease., • Ensure all designs comply with specifications and standards., • Participate in design review meetings with the project team. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • High productivity in office., • Sitting for prolonged periods of time., • Repetitive typing/data entry. This position works in office. General office hours are M-F, 7a-4p or 8a-5p. Working hours may vary to meet project requirements. Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Ability to read and understand customer specifications, engineering drawings, Bills of Material, and equipment Manifests., • Detail oriented, organized, and quality driven., • Ability to multi-task and change focus rapidly., • Critical thinker and problem-solver., • Self-starting instincts and motivation to work independently., • Capable of handling stress in a fast-paced, deadline driven environment. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor’s degree, or equivalent in years of experience., • 3+ years’ experience in conveyance, construction, or other system-level engineering functions., • Knowledge of conveyor systems, specifically baggage handling, is a plus., • Proficiency in CAD Software (AutoCAD, Inventor, or similar)., • Experienced use of Microsoft Office (Excel, Outlook)., • Legally authorized to work in the United States., • Ability to obtain airport security clearance as needed.

Job Description CNC Programmer Shepherdsville, KY Fulltime and Onsite New Flyer is North America’s heavy-duty transit bus leader, providing sustainable mobility solutions through transit buses, technology, and infrastructure. New Flyer is a subsidiary of NFI Group, a leader in propulsion agnostic bus and coach mobility solutions. Building on its 90+ year legacy of innovation, New Flyer is the only manufacturer offering all three types of zero-emission transit buses, with over 1,900 zero-emission buses delivered to date. New Flyer actively supports over 35,000 heavy-duty transit buses currently operated by approximately 500 agencies. POSITION SUMMARY: Play a pivotal role in our manufacturing process as a CNC Programmer. In this position, you will be tasked with developing CNC programs and operating advanced CNC machinery to create precision components for our innovative bus manufacturing processes. Your expertise will contribute to our commitment to quality and efficiency. WHAT YOU WILL DO: • Write and optimize CNC programs using advanced CAD/CAM software to ensure the efficient production of parts., • Set up and calibrate CNC machines, including lathes, mills, and routers, according to specifications., • Interpret technical drawings and blueprints to determine necessary machining steps., • Select appropriate tooling and fixtures to enhance production quality and efficiency., • Monitor production processes for accuracy, performing adjustments and troubleshooting as required., • Conduct inspections and quality control checks to maintain high standards of output., • Collaborate with engineers to refine designs and improve manufacturability., • Maintain detailed documentation related to machine settings, maintenance logs, and production reports. WHAT YOU NEED TO BE SUCCESSFUL: • Proven experience as a CNC Programmer in a manufacturing environment., • Strong proficiency in CAD/CAM software (MasterCam preferred) and G-code programming., • In-depth knowledge of CNC machining processes, tools, and materials., • Ability to read and interpret engineering drawings, blueprints, and technical documents., • Experience with CNC machine setup, operation, and maintenance., • Detail-oriented mindset with strong analytical skills., • Excellent mathematical capabilities and technical aptitude., • Capable of working effectively in a team and communicating with cross-functional teams., • Commitment to adhering to safety standards and protocols in the workplace. Shift Details: • 1st Shift, • Be a part of a team leading the world’s electrification of mass mobility., • Competitive Wages and comprehensive benefit package with Immediate benefit eligibility, • Paid holidays and vacation, • 401K with generous company match, • Passionate about creating a better product, a better workplace, and a better world, • Inclusive workplace culture that values and empowers team members., • On-the-job training in a continuous learning environment (we invested $15.9 million in 2024), • Advancement opportunities within our family of companies OUR WHY: We exist to move people. Our mission is to design, deliver, and support market-leading bus and motorcoach solutions that are safe, accessible, efficient, and reliable. Our values—safety, quality, integrity, accountability, teamwork, and sustainability—are at the core of everything we do. NFI Group | We Move People - YouTube Leveraging 450 years of combined experience, NFI offers a wide range of propulsion agnostic bus and coach platforms, including market leading electric models. Through its low- and zero-emission buses and coaches, infrastructure, and technology, NFI meets today’s urban demands for scalable smart mobility solutions. Together, NFI is enabling more livable cities through connected, clean, and sustainable transportation. News and information is available at , , , nfi.parts, , arbocsv.com, and carfaircomposites.com. New Flyer is committed to administering all employment matters in accordance with the value we place on fostering an inclusive and welcoming workplace that values the contributions of all team members. We ensure that all employment decisions are based upon merit and comply with applicable employment legislation and requirements. Accommodations are available at all stages of the recruitment process, at the candidates’ request.

Job DescriptionDescription: JOB SUMMARY Technical lead specializing in the design and development of parcel sortation and material handling systems. Adept at leading customer bids and projects from concept through execution, whether starting from a blank slate or refining existing layouts. Combines deep knowledge of automation and sortation technologies with a strong commitment to meeting site-specific requirements and strict customer specifications--- ESSENTIAL FUNCTIONS • Serve as the technical lead on assigned bids and projects, ensuring proposed system designs align with customer requirements, safety regulations, and internal engineering standards., • Design automated parcel sortation and material handling system layouts for proposals, from conceptual planning through to detailed designs., • Collaborate with internal project teams to maintain consistency in design practices and ensure compliance with company engineering standards., • Engage directly with customers to confirm all site-specific, project, and specification requirements are accurately captured and addressed., • Create and review detailed engineering designs, system calculations, and layout drawings for parcel handling systems., • Develop comprehensive drawing sets in AutoCAD and/or 3D models using Inventor to support proposals and project planning., • Generate detailed manifests outlining required demolition, modifications, and new equipment necessary for project execution., • Analyze 3D models against point cloud scans to validate accuracy and identify discrepancies., • Produce detailed clash detection reports, highlighting potential issues requiring field service attention., • Communicate effectively across cross-functional teams to ensure all technical requirements are captured for accurate estimating and bid development., • Coordinate design and estimating efforts across internal departments and external partners, acting as the primary technical point of contact., • Provide expert technical guidance throughout project planning, system installation, and commissioning phases., • Contribute to the development, maintenance, and enforcement of engineering tools, processes, and standards for the systems engineering discipline., • Perform additional engineering, estimating, and project-related tasks as needed to support business objectives.Requirements: REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: • Proficiency in Autodesk AutoCAD, Inventor, Navisworks, and BIM., • Strong knowledge of material handling mechanical and system-level engineering principles, including equipment, speed, flow rates, and integration of subsystems., • Ability to review and apply detailed customer specifications., • Proficiency in Microsoft Office (Excel, Outlook, Project)., • Ability to apply independent engineering judgment, cost analysis, and problem-solving skills., • Ability to produce accurate, high-quality design packages., • Detail-oriented, organized, and capable of balancing multiple bids and project priorities., • Strong organizational skills; capable of balancing technical design, estimating, and project coordination responsibilities., • Strong communication skills with the ability to interface effectively with customers, vendors, and internal teams., • Ability to lead design and estimating efforts, and coordinate across disciplines to achieve project and proposal goals. EDUCATION, EXPERIENCE AND QUALIFICATIONS: • Bachelor’s degree, or equivalent in years of experience., • 2+ years’ experience in conveyance, construction, systems engineering, or project engineering functions with exposure to cost estimating and proposal development., • Proficiency in CAD Software (AutoCAD, Inventor, or similar)., • Experienced use of Microsoft Office (Excel, Outlook, Project)., • Legally authorized to work in the United States.

Job Description Rapid Industries is a world leader in conveyor systems since 1967. We design, fabricate, install, and maintain complete material handling systems to fit all applications. We are a pinnacle company for the automotive and appliance industries, specializing in overhead and floor conveyors and specialty automation equipment. Rapid is looking for a Mechanical Drafter to join their team to assist engineering and production with 2D and 3D design and mechanical drawings using AutoCAD software and Inventor. We offer great benefits and career advancement opportunities! Responsibilities: • Create engineering drawings and designs for production and manufacturing., • Assist with layout and design engineering work on material handling solutions., • Generate accurate BOM and CAD layouts for manufacturing., • Prepare complete documentation packages for engineers., • Verify drawings are correct to specifications, codes, and other regulations., • Minimum of 2 years or more of related drafting experience in manufacturing. Material handling is preferred., • Experience using 2D and 3D AutoCAD required., • Experience using Inventor preferred., • Mechanically inclined, detail oriented, and eager to learn., • Excellent problem-solving skills., • Ability to multitask., • Excellent communication and teamwork skills. Benefits: 401(k), Health Insurance, Health Savings Account, LTD, STD, Basic and Voluntary Life Insurance, Paid Time Off Schedule: • 8 hour shift (7:00 AM) qehOb0qrkw