Trabajos cad design en Rochester, New YorkCrear alertas

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job Description We are currently seeking qualified candidates to fill an Engineering Technician / Designer position to join our Transportation practice for a full-time position in our Rochester, NY office. Duties include: • Generate highway, bridge and site plans along with the associated details., • Assist technical staff in specialized designs., • A.S. degree or equivalent, or technical school in CAD/Drafting, or equivalent experience., • 2-5+ years of relevant experience is preferred, entry level candidates will be considered., • Training/experience in the use of CAD/Drafting software. Proficiency in the use of MicroStation CONNECT Edition and OpenRoads/InRoads is preferred., • Proficiency in AutoCAD a plus., • Proficiency in Microsoft Office applications, such as Word and Excel., • Knowledge in NYSDOT CAD standards and the basics of transportation design a plus., • Should have good planning and organization skills., • Should have the ability to work as a part of a team., • Must be self-motivated. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description M/E Engineering is currently interviewing for an Electrical Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager, or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimations., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR BMUJn68jWa

Job Description We are currently hiring a Project Architect in our Architectural division at our Rochester, NY office. The Architectural Division at LaBella provides comprehensive planning and design services for a wide variety of markets, including State Corrections, Healthcare, K-12 and Higher Education, Residential, Commercial, and Municipal. The overall expectations of the Project Architect position are to work with large project teams, including outside subconsultants, to ensure that all aspects of the project are being met and completed. An individual in this position needs to be capable of delegating aspects of work to the Project Technician and coordinating with all other disciplines. The Project Architect will assist the Project Manager with client meetings, design team meetings, and construction administration. In addition, the Project Architect must be motivated and capable of performing all duties with minimal guidance. A successful candidate will be self-motivated with the ability to lead, communicate, coordinate, and motivate. A successful candidate will also possess strong interpersonal, collaboration, and organizational skills, as well as contribute to a positive work environment. Requirements • Bachelor’s or Master’s degree in Architecture, • Registered Architect in the state of New York (desirable but not required), • 6-10+ years of experience, • Prior experience working with NYS OGS and/or other government agencies (desirable but not required), • Have thorough knowledge and understanding of New York State building codes, • Strong technical design and construction document skills, • Well-developed project design and planning skills, • Excellent graphic presentation skills, • CAD experience. (AutoCAD and Revit), • Microsoft Office (Word, Excel, Outlook, MS Project) Salary Range: $70,000 - $90,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description We are currently hiring a Project Manager in our Architectural division at our Rochester, NY office. The Architectural Division at LaBella provides comprehensive planning and design services for a wide variety of markets, including State Corrections, Healthcare, K-12 and Higher Education, Residential, Commercial, and Municipal. The overall expectations of the Project Manager position are to work with large project teams, including outside subconsultants, to ensure that all aspects of the project are being met and completed. The Project Manager is responsible for leading an entire architectural project, from budget to implementation. The Project Manager oversees architectural projects from the conception stage through construction and the eventual completion of the project, making sure that project teams meet quality, schedule, contractual, and budget goals. A successful candidate will be self-motivated with the ability to lead, communicate, coordinate, and motivate. A successful candidate will also possess strong interpersonal, collaboration, and organizational skills, as well as contribute to a positive work environment. Requirements • Bachelor’s or Master’s degree in Architecture, • Registered Architect in the state of New York (desirable but not required), • 12+ years of experience, • Prior experience working with NYS OGS and other government agencies (desirable but not required), • Have thorough knowledge and understanding of New York State building codes., • Strong technical design and construction document skills, • Well-developed project design and planning skills, • Excellent graphic presentation skills, • CAD experience (AutoCAD and Revit), • Microsoft Office (Word, Excel, Outlook, MS Project) Salary Range: $90,000 - $115,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical project leader for the organization with the responsibility of expediting the process flow of jobs through the shop from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost-effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Minimum Qualifications: • Intermediate level professional, • Two years or more of professional experience in a manufacturing business environment, • Five years or more of manufacturing/sheet metal/welding fabrication knowledge, • CNC machining / programming background is a plus, • A.S. Degree in Engineering required; Manufacturing, Mechanical or Industrial Degree (B.S. preferred) Specific Duties: • Responsible for all phases of the quoting process including; developing a Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usage’s, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual job cost vs. quoted job cost, • Drive process improvements to generate cost reduction, • Help write the process sheets (Travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed Measurement Tools: • On time delivery to customers, • Quality performance, • Decrease in job setup time on turret, mills and lathes, • Cost savings for production; including tooling, • Project management and document control organization skills, • Have a “Team player attitude”, promote commitment and follow through This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: A CNC Machinist I will operate computer numerical control (CNC) mill and lathe machines to precisely manufacture parts from raw materials like metal or plastic, by interpreting blueprints, setting up the machine, and monitoring the production process to ensure the finished product meets required specifications and quality standards. Key responsibilities include reading technical drawings, selecting appropriate cutting tools, basic programming using CAD/CAM software and performing quality checks on the produced parts. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Review and understand blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and set up requirements., • Align and secure holding fixtures (such as: collets, vices, indicating vices), cutting tools, attachments, accessories, and materials on machines, such as mills, lathes, jig borers, grinders, and tooling pre-setter., • Understand, calculate and set controls to regulate machining factors, such as speed, feed, coolant flow and enter command to retrieve, input or edit computerized machine control media; observes machine operation to detect malfunctions or out-of–tolerance machining and adjusts machine controls or control media as required., • Verify conformance of finished work piece to specifications, using precision measuring instruments such as micrometers, calipers, comparator, height gauges, and gauge blocks.., • Confer with engineers, production personnel, or technical leads to resolve machining or assembly problems., • Comply with company requirements in completing essential documentation as required., • Train, assist and support new employees in producing quality parts and in completing all process requirements., • Assure all policies and procedures are followed and safety precautions are taken to reduce the risk of injury., • Maintain a clean work area and assure safe operation of all equipment., • Be available on reasonable notice for unscheduled overtime to meet production schedules., • Perform and document Operator Preventative Maintenance operations as needed., • Fully understand setup and operation of at least two machining field (mills, chucker lathes, swiss lathes, grinders, EDMs, etc) You Have: • High School Diploma/GED or vocational equivalent., • Minimum 3 years’ experience in precision CNC Mill/Lathe machining within a manufacturing environment., • Basic understanding of machine programming capabilities through CAD/CAM software., • Basic understanding of GD&T and corresponding measurement tools relative to a precision machine shop environment (micrometers, verniers, drop gauges, optical comparators, etc.), • Basic Knowledge of G & M codes., • Proficiency in blueprint reading, quality inspection, creating preventive maintenance plans, mechanical troubleshooting, and lean manufacturing principles. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. C Shift: Monday - Friday, 10:00pm - 6:30am Before transitioning to a standard C shift, this role will spend 2 - 4 weeks training on A shift: Monday - Friday 6:00am - 2:30pm

Job Description TekPro is partnered with a premier contract machining company in the Rochester, NY area in their search for a Manufacturing Engineer! This position is focused on MasterCAM programming, tooling/fixture design, and process engineering for complex parts in the aerospace, defense, and medical industries. This position typically offers high hourly pay and lots of overtime for tremendous earning potential, but can be flexible for a salaried job offer as well. Position Summary Responsible for developing and optimizing manufacturing processes. Analyze products and methods to innovate both new and existing operations. Drive enhancements that reduce cycle times, elevate product quality, and generate significant cost savings. Duties and Responsibilities: • Ensure product stability and support manufacturing by designing robust process capabilities, establishing standards, and continually improving the manufacturing process., • Optimize & innovate manufacturing, production process, machine operations and overall performance.  Collaborate with management, manufacturing & other departments to troubleshoot production needs., • Upgrade systems and processes with new technology., • Meet customer deadlines on quotes., • BS degree in Engineering or commensurate work experience, • Previous experience as a manufacturing engineer or similar role preferred., • Proficient in CAD/CAM software (SolidWorks, Mastercam, Part Maker)., • Familiarity with manufacturing equipment and quality assurance techniques (CNC equipped)., • Proficient in Microsoft Office and ERP systems., • Strong project management, problem-solving, and multitasking abilities., • Continuous commitment to health and safety standards., • GD&T, • CNC Tooling, • CNC Programming, • Design for Manufacturability (DFM), • Machine Setups for Production Runs, • CNC Mill (3-4 axis VMC), • CNC Lathe (2-4 axis), • CAM Software (Mastercam), • CNC Mill (5+ axis VMC)

Job DescriptionDescription: Position Summary The Manufacturing Engineer is responsible for developing, optimizing, and sustaining manufacturing processes to support efficient, high-quality production. This role involves analyzing products and production methods to improve both new and existing operations. Working collaboratively within a cross-functional team environment, the Manufacturing Engineer applies technical expertise to drive continuous improvements that reduce cycle times, enhance product quality, and deliver measurable cost savings. Duties and Responsibilities • Design and implement robust manufacturing processes to ensure product stability, establish production standards, and support ongoing process improvements., • Optimize and innovate manufacturing methods, equipment operations, and overall production performance to enhance efficiency and reduce waste., • Collaborate cross-functionally with engineering, production, and other departments to troubleshoot issues and resolve production challenges., • Research, recommend, and integrate new technologies and systems to upgrade manufacturing capabilities and drive innovation., • Prepare accurate and timely quotes in response to customer deadlines, ensuring feasibility and alignment with production capabilities., • Design and develop end-to-end manufacturing solutions including processes, tooling and fixtures, CNC programs, and detailed work instructions. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in Engineering preferred., • Prior experience as a Manufacturing Engineer or in a similar role is strongly preferred., • Proficient in CAD/CAM software, including SolidWorks, Mastercam, and PartMaker., • Knowledge of CNC manufacturing equipment and quality assurance methodologies., • Skilled in Microsoft Office Suite and experienced with ERP systems., • Strong project management, problem-solving, and multitasking capabilities., • Demonstrated commitment to maintaining health and safety standards., • Able to work both independently and collaboratively within a team environment. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Electrical Designer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • CAD work during the conceptual engineering phase of the project, • Provide support during the detailed engineering phase of the project by drafting key concepts needed to convey intent to the design engineer as needed, • Review a sample of all drawings supplied by detailed engineering firm to ensure compliance with Customer’s CAD standards, this includes items such as:, • Border and revision procedures and compliance, • Line and text style weights, fonts, heights,, • Overall drawing format issues, • Proper use of CAD layers in drawings, • 5 years or more of CAD experience, • Associates degree preferred or equivalent work experience, • Utilities background preferred, • Proficient with AutoCAD and MicroStation. Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The Senior Project Engineer- Mechanical oversees design, development, implementation, and analysis of projects from concept to completion. Has a broad knowledge of engineering design tasks and assists in the resolution of complex problems. This individual manages the preparation of plans, designs, calculations, equipment selections and engineering reports. What are we looking for: • Associates degree required; Bachelor's degree preferred. Higher education degree a plus., • 10+ years of experience in building infrastructure and/or energy reduction initiatives., • Additional certifications (i.e. CEM, LEED AP, EIT, or PE) also a plus., • Proficient with planning, scheduling, and coordinating detailed phases of projects., • Proficient with time management to follow the various detailed phases of projects., • Proficient computer skills, including Microsoft Office. CAD experience a plus., • Strong written and verbal communication skills are necessary. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description M/E Engineering is interviewing for a Mechanical Design Engineer in our Rochester, NY office. We are a growing full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering, P.C. is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop skills of the Project Engineer/Design Engineer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer, Project Engineer, Group Manager, Partner, Associate, and or Principal., • Independently performs assignments after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • Assists in the preparation of contract documents., • Plans, schedules, and conducts all phases of the work in a partial or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • Associate degree, Bachelor of Science degree, or equivalent combination of education and experience., • The compensation range for this position is $62,400 to $72,500 per year. M/E Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR ZnYKP7DT72

Job Description M/E Engineering is currently interviewing for a Plumbing/Fire Protection Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR 2gCnn3YHX5

Job DescriptionDescription: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Generous sign on bonus., • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit, • Pet insurance enrollment option Position Summary The Project Manager position will be responsible for management of high profile and complex projects from start to finish. This role will also work with employees on the shop floor to improve efficiency, safety, and quality of manufacturing processes. Duties and Responsibilities · Responsible for driving total project management solutions from quote through to shipment · Plans and designs tools, fixturing, and other mechanically functioning equipment · Develops plans and implements new machining processes. · Spearheads process optimization in both engineering and manufacturing. (automation) · Provide technical support to sales team and support customer interface accordingly · Complete detailed cost models needed to support providing quotes to customers · Comprehends and disseminates customer driven specifications called out on drawings and determine how to process the parts in accordance with the specifications required. · Works with QC to ensure all QMS requirements are being met during job routing. · Understands ISO 9001 workflow requirements and follow such procedures. · Builds B.O.M. on job routers to conform with customer material requirements called out on the print, parts list, and or contract. · Reviews customer supplied purchase orders and contracts to ensure we meet all order requirements and build notations in the work instructions. · Orders specialty material, hardware, and finishing supplies pertaining to the job or project assigned. · Works with QC to review material certifications from vendors and sign off that they meet the called-out requirements from the contract. · Effectively communicates any issues encountered while working on assigned projects back to supervisor and the customer as needed in a professional and timely manner. · Leads post and pre-production reviews on defense projects during first run or after encountering issues. · Creates measurable KPI’s that will quantify success on critical to plant growth projects. · Provides support as Engineering Manager back up. · Interprets customer supplied drawings and determine the best method of manufacturing considering the equipment available and the current manufacturing schedule. · Writes work instructions in detail pertaining to any one of the fabrication processes. · Utilizes 3D CAD software to help shop floor employees better understand the manufacturing process of various parts. · 3D model customer parts using their supplied drawings utilizing CAD software. · Program machines. (laser, turret) · Supports the shop floor in any fixture design / work holding suggestions and optimize quality outcome. · Utilizes Mastercam, SolidWorks, Radan, Epicor, or similar software when required, to communicate effectively to the shop floor. · Maintains revision control of manufactured parts using our ERP system. · Other duties as assigned. Requirements: Position Qualifications · Bachelors degree in Engineering or related discipline is a plus · 10 plus years of experience in hands on machining (mills and lathes) · 3+ years of experience in Project Management. Knowledge, Skills, and Abilities · Strong communication skills, both written and verbal · Excellent problem-solving skills · Attention to detail and accuracy. · Proficient in Microsoft Office. · Ability to work independently and as part of a team. · Flexibility and adaptability to changing priorities and deadlines. · Confident decision-making ability · Capable of participating in cross-functional settings and working with support functions, manufacturing, quality engineer, and facilities. · Support cost reduction & continual improvement activities. · Analyze raw data and generate usable reports. · Knowledge of print reading and understanding of common GD&T practices. · Knowledge of materials and their chemical and physical properties.

POSITION DESCRIPTION: The Junior Packaging Engineer plays a key role in supporting the design, development, and implementation of packaging solutions that meet product protection, cost efficiency, and sustainability goals. This entry-level position is ideal for a recent graduate or early-career professional with a passion for packaging innovation and a desire to grow within a collaborative, fast-paced environment. The Junior Packaging Engineer works closely with cross-functional teams including product development, supply chain, and operations to ensure packaging solutions align with business objectives and customer expectations. ROLES & RESPONSIBILITIES: Assist in Packaging Design: • Support the creation of packaging concepts for new and existing products using CAD and prototyping tools., • Research and recommend materials based on performance, cost, and environmental impact., • Execute standard packaging tests (i.e. drop, vibration, compression) to validate performance., • Identify opportunities to reduce packaging waste and improve recyclability., • Assist in evaluating packaging designs for cost-saving opportunities., • Communicate packaging requirements to external vendors and assist in sourcing., • Work with marketing, operations, and product teams to ensure packaging meets branding and operational needs., • Support compliance with packaging regulations and industry standards (i.e. ISTA, ASTM)., • Prepare and update packaging specifications, test reports, and change records., • Participate in process improvement initiatives and lean manufacturing projects., • Suggest enhancements to packaging workflows and tools. SKILLS & EXPERIENCE: • Bachelor’s degree in Packaging Engineering, Packaging Science, or a related field., • 0-2 years of relevant experience in packaging (internships or co-ops included)., • Basic knowledge of packaging materials such as corrugate, plastics, and paperboard., • Familiarity with CAD software (i.e. ArtiosCAD, SolidWorks) and prototyping tools., • Understanding of packaging testing protocols and standards (i.e. ISTA, ASTM)., • Strong analytical and problem-solving skills., • Effective verbal and written communication skills., • Ability to work collaboratively in a cross-functional team environment., • Detail-oriented with strong organizational and documentation skills., • Eagerness to learn and grow within the packaging engineering field.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical leader for the organization, with the responsibility of expediting the process flow of jobs through the factory from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Requirements Minimum Qualifications: Position is located in Rochester, NY • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word, Excel and MRP Systems, • Solid understanding and application of Geometric Dimensioning & Tolerancing (GD&T), • Ability to read and understand blueprints at an advanced level, • Experience in the utilization of lean manufacturing practices and ISO Quality Systems, • Three years or more of manufacturing/sheet metal with welding fabrication knowledge, • CNC machining / programming background is a plus, • Ability to design & model in 3D CAD Software, Solidworks Preferred Production Specific Duties: • Voices all concerns while working with other production staff, Quality Assurance, Engineering and Vice President of Operations to resolve any and all current or potential problems affecting the production schedule, • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures, • Recommend continuous improvement actions for improving work processes Departmental Specific Duties: • Responsible for all phases of the CNC Programming Process, review Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual time and material standards vs. quoted time and material standards, • Drive process improvement to generate cost reduction, • Help write the process sheets (travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed, • Design tooling and gauges as needed to ensure customers quality requirements are achievable, • Control proper revision levels for all programs in the company database Measurement Tools: • On time delivery to customers, • Quality performance recognized in scrap reduction and minimized process variation, • Decrease in job setup time on all equipment, • Cost savings for production; including tooling, • Project management and document control organization skills

Job DescriptionDescription: Addison Precision Manufacturing is a world-class contract manufacturer of precision-machined components. Our focus reflects a commitment to machining excellence, and we strive to deploy the latest technologies to meet the highest standards of any industry requiring precision machined components, including customers in the aerospace, aircraft, medical and precision manufacturing industries. In 2019 we built a brand new, air conditioned, state of the art, manufacturing facility. We are looking to build our team here. Addison Precision Manufacturing is looking for Process Engineer who will develop and maintain processes in a lean manufacturing setting. The Process Engineer works with both the customer and fellow departments to develop and improve the manufacturing process by studying product and manufacturing methods. Process Engineers have the ability to contribute their knowledge and ideas to improve upon current processes, resulting in reduced cycle times, improved quality of product and increased cost savings. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insuranceRequirements: Duties & Responsibilities: • Support manufacturing in productivity and quality improvements, • Assure product and process quality by designing testing methods, establishing standards., • Develop and maintain manufacturing process flows., • Collaborate with Engineers, Contractors and Suppliers, • Optimize processing capabilities through use of continuous improvement principles, • Assist in the development (design and machine) new/existing features., • Support Root Cause Analysis and Corrective Action determination, • Bachelor's or Master's degree in Engineering preferred or equivalent experience., • Previous experience as a process engineer or similar role preferred., • Familiarity with manufacturing equipment and quality assurance techniques., • Project management skills, • Problem solving ability, • Strong GD&T knowledge, • Continuous commitment to health and safety standards., • Contribute to a team effort as well as being able to work independently.

Job Description Electronics/Software Engineer Overview As one of our Electronics/Software Engineers, you will be key to helping us research, design, develop, and test electrical components, circuits, and systems for the creation and manufacturing of OLED Lighting products. Why is this role so important? Ultimately, we pride ourselves in empowering our customers to make unique products with the world's most advanced, best performing, and highest quality multi-stack OLED technology. It is our mission. We must maintain our technological advantage by continuous development of advanced technologies to make our OLED lighting products even more reliable, brighter, and higher performing at lower cost. What You'll Do Every Day As a part of our User Experience team, you will work closely with the Research & Development and Production teams to help build and ensure the functionality and quality of various prototypes, demonstrators, applications, manufacturing tools, and products under development. The cool thing about OLEDWorks is that one minute you might be working closely with our CTO, and the next you might be working alongside one of our new co-op employees or technicians learning all about OLEDs and our technology. We truly have a culture of learning, knowledge sharing, and innovative inspiration. Day to day, you will be designing devices, coding applications, and performing hands-on electronics work. You will work in a desk environment using CAD and development software as well as in our research lab using a variety of electronics assembly tools. You will also support various trade shows and customer tech days with the design and assembly of demonstrators (on site). Skills You Must Bring Ideally you have a BS/BE degree in Electrical Engineering or Electronics Engineering. You have at least 3 years of full-time related job experience in a research and/or manufacturing environment. You can code, use 2D and 3D CAD software, and have electronics design and assembly skills all in a professional setting. You pay attention to the details and are diligent and thorough. Solving challenging technical problems is a passion and never-ending mission. Working on a wide variety of project types is energizing. You take pride in your accurate and consistent work and like to contribute collaboratively as a team. You are comfortable primarily working in an office, located in Rochester, NY. OLEDWorks is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, sex, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Sheet Metal Process Engineer Reports to: Fabrication Director Your Role: The Sheet Metal Process Engineer is responsible for shepherding products through the production process, while ensuring customer delivery and quality requirements are satisfied. This high impact role requires innovative thinking, a high sense of urgency and collaborating in a cross-functional environment. Responsibilities Include: • Develop and validate manufacturing processes for new products, including tooling, fixtures, and assembly methods., • Participate in design reviews to ensure manufacturability and cost-effectiveness., • Interpret and clarify engineering drawings, BOMs, and specifications for internal teams and external suppliers., • Serve as the primary point of contact for technical questions related to the TDP., • Ensure documentation is complete, accurate, and production-ready., • Define and optimize processes., • Support root cause analysis and corrective actions for production issues., • Implement lean manufacturing principles and continuous improvement initiatives., • Work closely with procurement, quality, and supplier engineering teams to ensure alignment on technical requirements., • Collaborate with design and R&D teams to ensure manufacturability of new products., • 5+ years hands-on experience of bending, forming, welding and finishing processes., • .AS/BS in relevant technical field., • Strong understanding of NPI processes and design-for-manufacturing (DFM) principles., • Familiarity with ERP and PLM systems., • Experience working with suppliers and contract manufacturers., • Proficiency in CAD software (e.g., SolidWorks) and manufacturing systems (e.g., PDM, Autodesk Vault, SW Composer)., • Knowledgeable in programming., • Proficiency in interpreting engineering drawings, GD&T, and BOMs., • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision ProductsA reasonable estimate of the compensation range for this position is $60,000.00 - $90,000.00 per year. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR UUQJBe6ntM

Job Description About Us SWBR is a nationally recognized design firm with expertise in architecture, interior design, structural engineering, landscape architecture, graphic design, planning and civil engineering. Since our founding in 1969, the focus of our expertise and most of our current work supports education, housing, and workplace design. We are proud of the diverse range of backgrounds, personalities, and passions that make up our team. But for all our differences, we’re united by a core mission: to positively impact lives through meaningful design. With 120+ professionals, we are headquartered in Rochester, New York with offices in Troy, Syracuse, and Buffalo, New York. We are currently seeking a full-time Level IV Interior Designer in our Rochester, NY office. This position leads Interior Design services on project teams and reviews/advises/provides design solutions, including interior space/spatial relationship analysis and aesthetic/functional requirements in support of the design intent that protects the health, safety, and welfare of our clients. The incumbent will also work to enhance/define aspects of project through spatial analysis, color, finish, furniture, lighting recommendations, special design features and furniture layouts. They will be responsible for delegation/completion of interior documents and expected to seek new and maintain existing client relationships. Applicants for this position must have experience in education, municipal, commercial, industrial and/or multi-unit/multi-use housing based projects or their application may not be considered. Duties: • Manages Interior Design projects (including budget, fee, scope, client goals, milestones and deadlines). Leads Interior Design services on Architectural projects. Client contact from Interiors, • Reviews product and material research to ensure durability, wearability, maintenance, installation requirements, etc., • Prepares budget estimates for interior finishes and furnishings, • Produces/delegates project documents (including CAD production), schedules and specification information for interior building construction, materials and furnishings per SWBR standards. Reviews interior documents for accuracy, thoroughness/completion • Understands and implements contracts and applicable AIA agreements, • Prepares interiors fee estimates, hours, letter proposals, resource plans, including consultants, • Works with Business Development to prepare qualification packages, • Oversees preparation of material boards, power points, 3D renderings, sketches, • Leads in-house interiors project meetings, including consultants, • Leads (or guides designers to lead) client meetings/presentations, will engage in working directly with client, • Reviews/processes or delegates submittals, leads punch lists, • Answers/delegates requests for information (RFI) and architect’s supplemental information (ASI), • Understanding the documentation for extra services – Professional Services Change Order (PSC) vs follow up email/additional services proposal, • Prepares Rough Order of Magnitude (ROM) cost estimates for projects, • Review financial reports from projects they are involved with, responsible for interiors hours, distribution of hours and fee, • Reviews project invoices, follows up with clients for aged receivables, outstanding invoices, • 4 Year College degree in Interior Design or Architecture, • 8-15 years of related experience in a commercial-based Interior Design firm required. Experience with Education, multi-unit/multi-use housing, Commercial, Municipal, and/or Industrial projects needed., • NCIDQ Certification required, should have good-to-exceptional LEED V4 Knowledge Base., • Advanced knowledge of interior finishes & materials (flooring, wall, ceiling, specialty, upholstery, window treatment, etc.), • Advanced knowledge of color theory, pattern/texture with materials and finishes, • Advanced knowledge of interior building codes, • Knowledge of standard vs premium products including content, durability, and maintenance., • Has experience with reviewing documents for required contents, thoroughness and completion during schematic design, design development, construction documents, permit sets, etc •, • Knowledge of/ability to enact Professional Service Change Orders and proposals for additional services, • Advanced knowledge of furniture (styles) – available finishes and upholsteries., • Advanced proficiency in Revit, Word, Excel, Power Point, Sketch Up, Photoshop, Illustrator, 3D color renderings, other programs plus ability to help and/or teach other designers as needed, • Individual will work in a normal office setting and occasionally visit active construction sites, and must be physically able to stand, walk, stoop, kneel, crouch, reach, and keyboard., • Position requires occasional lifting, pulling and pushing of up to a maximum of 25 pounds Base Salary Information: $74,247-$89,482 The above salary ranges represent a good faith range for incumbents of this position. Actual offers will be based on experience, education level, and demonstrated skills and will be at the discretion of the employer. We actively support professional development, including steps towards licensure and/or related accreditations, as a benefit of employment. SWBR offers an outstanding compensation and benefits package and provides a creative environment. Applicants interested in joining a progressive, energetic and family-friendly firm that rewards hard-working team players and offers unlimited growth potential in a multi-studio design setting should view our website at to apply. SWBR is an Affirmative Action/Equal Opportunity Employer. Veterans and Individuals with disabilities are encouraged to apply.

Job DescriptionAchieve more with Volt Volt is immediately hiring for a Manufacturing Engineer in Rochester, NY As a Manufacturing Engineer you will: The Manufacturing Engineer II operates with minimal supervision and is responsible for designing, implementing, and optimizing manufacturing processes within a single facility. This role supports the production of both new and existing products by improving efficiency, quality, cost, and safety. It may also involve planning assembly layouts, testing new systems, and managing capital projects, all while ensuring compliance with regulatory standards. • Plans and designs basic manufacturing processes, • Determines equipment and tooling needs, • Develops and implements efficiency, safety, and cost-focused projects, • May lead small teams, • Advises on design concepts and specifications, • Ensures processes meet regulatory standards, • Applies technical standards and principles, • Investigates and resolves quality issues, • Suggests corrective actions, • Performs other duties as assigned This is a full time, Direct Hire opportunity. The ideal candidate will have: • Bachelor’s Degree in Engineering or related field, • 2–5 years of relevant experience, • Proficient in applying engineering concepts to solution lines, • Strong analytical and problem-solving skills, • Experience with continuous improvement methods (e.g., pull systems, JIT, process mapping), • Working knowledge of:, • Data structures and database programming, • CAD/CAM and computer-aided manufacturing systems, • Standard business and data analysis software, • Engineering drawings and specifications, • Geometric dimensioning and tolerancing (GD&T), • Strong verbal and written communication skills, • Well-organized, detail-oriented, and able to multitask, • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Access, Outlook) Salary: $70,000-$80,000 *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.

Job Description Job purpose Individual will be responsible for producing, modifying and repairing tools used in the manufacturing process. Must have 10+ years of experience reading prints and using mills, lathe, surface grinders and other standard tool room machines to make parts to print. Must have good attention to detail and accustom to working and measuring to close tolerance and delicate parts. Responsible for maintaining work quality and doing in process inspection. Essential Duties • Assembling, fitting and repairing tools, • Following engineering drawings, including interpreting GD&T, • Using 2D and 3D computer aided design and manufacturing software (CAD/CAM), • Assisting with tool maintenance, • Teach basic machine operation to floor operators as required, • Give experienced input to tooling designs for better manufacturability, • Complete production operations requiring tool room machines, • Other tasks not listed here that arise from an ever-growing environment, • Other duties as assigned Key Responsibilities Responsibilities Measurement Make tools to engineer parts Parts measured to print Assemble and debug prototype tools Tools made for production put to use Readily assist production and engineer as required Tasks completed in a timely manor Minimum Qualifications • Education: High school diploma or GED/Technical Training Certificate/Equivalent experience., • Work experience: Journeyman Tool & Die Maker or equivalent with 5+ years of experience., • Ability to read engineering prints with high understanding of GD& T, • High competency using micrometers, indicators, calipers, etc., • Requires intermittent long periods of standing and/or walking, • Periodic lifting of materials not to exceed 40 pounds, • Willing to work beyond normal hours if needed, • Subject to stressful situations, • An understanding of both Metric and English measuring systems, • Ability to write and edit programs with understanding of cutting parameters, • Ability to use Manual Knee Mill, Manual Lathe, Grinder, Machine Tools, Inspection and measuring instruments such as micrometers, calipers, and indicators and power hand tools Physical Demands and Work Environment • Standard work week is Monday through Friday, hours to be consistent with business unit; some off hours work expected, • Generally working in Office with some activities in production environment., • Repetitive motion, • Some day or overnight travel domestically could be required.

Job Description M/E Engineering is currently interviewing for a Mechanical Project Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adoptions and modifications to create schematic., • Assignments have clear and specified objectives and require the investigation of a limited number of variables., • Works with Principal, Associate, and/or Senior Engineer/Designer to clarify project scope and schedule of deliverables., • Provides supervision and guidance related largely to overall objectives, critical issues, new concepts and policy matters., • Consults with Principal, Associate, Group Manager or Senior Engineer concerning unusual problems and development., • Prepares project plans and specifications., • Supervises Designers and CAD Operators as related to tasks in progress., • Responsible for accuracy of design, specifications, drawings, etc., • Establishes project design concepts, design criteria and scope, space requirements, etc., • Makes engineering computations., • Projects cost estimating., • Coordinates between trades, architect, client, etc., • Responsible for equipment selection, sizing, etc., • Checks work of designers and CAD operators., • Reviews shop drawings., • Provides suggestions for improvements of M/E standards., • Supervises, coordinates, and reviews the work of Designers and CAD Operators., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science Degree or equivalent. Powered by JazzHR OWWlxUAU1O

Job Description M/E Engineering is interviewing for an entry level CAD Operator position in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop professional work knowledge and abilities requiring application of standard techniques, and procedures in carrying out computer aided design (CAD) and Building Information Modeling (BIM) tasks., • Exercises judgment required in details of work and in making preliminary selections and adoptions of drawing layouts, standard details, symbols and procedures., • Performs work assigned by BIM Lead under supervision and training., • Assists engineers with Revit issues, reports unfamiliar problems to BIM Lead for solutions., • Takes calls from coworkers on Microsoft Teams with camera on., • Leads BIM coordination meetings with architects and engineers, determines project setup requirements., • Creates Revit projects on ACC, cleans and links AutoCAD drawings, adds required team members., • Builds knowledge base in order to solve common Revit, Navisworks, ACC and AutoCAD issues., • Copies, creates, and maintains detail libraries in Revit and PDF., • Assist with conventional designs, investigations, and surveys for which there are standard procedures., • Prepares sketches and other activities of standard procedures and limited scope requiring knowledge of principles and techniques commonly employed., • Applies standard practices and techniques, adjusts and correlates data, recognizes discrepancies and follows design through a series of related steps., • Files blueprints, catalogs, etc., • Duplicates and check submittals under review of Engineer., • If assigned BIM/CAD Coordinator duties, the following is required:, • Works with BIM/CAD Coordinator from Architect and other sub-consultants to determine deliverable requirements., • Updates REVIT Model and CAD Backgrounds, then notifies design team, • Coordinates and oversees deliverables. Works with the Administrative group and project to deliver set as expected., • Performs conventional designs, investigations, and surveys for which there are standard procedures., • Performs all other related duties as assigned.Education and Experience, • High school diploma. Technical school training or Associate degree preferred.Compensation Powered by JazzHR 5dHkPoC2Hj

Job Description Job Title: Mechanical Design Engineer Reports To: Optics/Systems Engineering Manager Grade: 12 Summary We are seeking an experienced and innovative Mechanical Design Engineer to join our engineering team at a senior level. The successful candidate will lead the design, development, and testing of advanced mechanical components and systems, with a strong emphasis on research, development, and cross-disciplinary collaboration. This role requires demonstrated expertise in product development, project leadership, and the ability to mentor junior engineers, while working closely with manufacturing and quality teams to ensure designs meet performance, cost, and manufacturing objectives. Essential Duties and Responsibilities: • Lead complex analytical work in machine design, dynamics, fluid mechanics, and magnetics., • Oversee and create detailed mechanical designs using Creo CAD software; guide prototype development and ensure designs meet advanced functional, performance, and cost requirements., • Drive precision engineering initiatives, including flexure design, kinematic repeatability, optical mounting, and thermal management., • Identify and implement improvements to existing products by analyzing performance and reliability, incorporating feedback from production, customer service, and field data., • Conduct and supervise simulations, stress analysis, and physical testing to verify design performance; ensure compliance with relevant standards and regulations., • Manage and run test stands and machines, conduct experiments, and build engineering prototypes; oversee the execution of new product development prototype experiments for mechanical/electrical/thermal/fluid systems., • Utilize and train others on sophisticated metrology equipment, including laser position measurement, ball-bar motion equipment, rotation measurement, temperature, fluid flow, and pressure measurement devices., • Write and review concise test reports with justifiable conclusions and recommendations; present findings to cross-functional teams and leadership., • Collaborate with external suppliers and vendors to ensure materials and components meet required specifications; lead supplier development initiatives as needed., • Foster frequent communication and open brainstorming with team members; mentor junior engineers and interns., • Focus on research and development: Lead innovative research to develop new technologies and improve existing products. Collaborate with cross-functional teams to explore new ideas and methodologies. Drive R&D projects to advance technological capabilities and maintain a competitive edge in the industry. Education and/or Experience – Minimum B.S. in Mechanical Engineering or Technology with 7+ years of relevant work experience (MS or PhD preferred); or equivalent combination of education and experience. • Advanced familiarity with motion systems as related to mechanical design., • Advanced understanding of mechanical systems, materials science, and manufacturing processes., • Demonstrated expertise with measurement tools, data acquisition systems, and sensors., • Proven experience with Geometrical Dimensioning and Tolerancing methods; Six Sigma certification preferred. Technical – • Strong technology perspective, particularly related to the manufacture of complex machinery (e.g., CNC machines, machine motion, etc.)., • Expertise in tolerance analysis, stress analysis, FEA (Finite Element Analysis), and thermal management techniques., • Experience leading projects and mentoring junior engineers. Salary Range: $80,000-$115,000. The salary offered will be determined by the candidate's education, experience and other qualifications, considering internal equity among current employees with similar skills and experience. QED is an Equal Opportunity Employer

Job Description Title CNC Machinist I Department Machine Shop Reports to Machine Shop Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: A CNC Machinist I will operate computer numerical control (CNC) mill and lathe machines to precisely manufacture parts from raw materials like metal or plastic, by interpreting blueprints, setting up the machine, and monitoring the production process to ensure the finished product meets required specifications and quality standards. Key responsibilities include reading technical drawings, selecting appropriate cutting tools, basic programming using CAD/CAM software and performing quality checks on the produced parts. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Review and understand blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and set up requirements., • Align and secure holding fixtures (such as: collets, vices, indicating vices), cutting tools, attachments, accessories, and materials on machines, such as mills, lathes, jig borers, grinders, and tooling pre-setter., • Understand, calculate and set controls to regulate machining factors, such as speed, feed, coolant flow and enter command to retrieve, input or edit computerized machine control media; observes machine operation to detect malfunctions or out-of–tolerance machining and adjusts machine controls or control media as required., • Verify conformance of finished work piece to specifications, using precision measuring instruments such as micrometers, calipers, comparator, height gauges, and gauge blocks.., • Confer with engineers, production personnel, or technical leads to resolve machining or assembly problems., • Comply with company requirements in completing essential documentation as required., • Train, assist and support new employees in producing quality parts and in completing all process requirements., • Assure all policies and procedures are followed and safety precautions are taken to reduce the risk of injury., • Maintain a clean work area and assure safe operation of all equipment., • Be available on reasonable notice for unscheduled overtime to meet production schedules., • Perform and document Operator Preventative Maintenance operations as needed., • Fully understand setup and operation of at least two machining field (mills, chucker lathes, swiss lathes, grinders, EDMs, etc) You Have: • High School Diploma/GED or vocational equivalent., • Minimum 3 years’ experience in precision CNC Mill/Lathe machining within a manufacturing environment., • Basic understanding of machine programming capabilities through CAD/CAM software., • Basic understanding of GD&T and corresponding measurement tools relative to a precision machine shop environment (micrometers, verniers, drop gauges, optical comparators, etc.), • Basic Knowledge of G & M codes., • Proficiency in blueprint reading, quality inspection, creating preventive maintenance plans, mechanical troubleshooting, and lean manufacturing principles. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift: Monday - Friday, 2:00pm - 10:30pm Before transitioning to a standard B shift, this role will spend 2 - 4 weeks training on A shift: Monday - Friday 6:00am - 2:30pm

Job Description Mechanical Engineering Intern-Spring Semester Summary The Mechanical Engineering Intern provides support to Engineering, R&D, Manufacturing and Quality, in various capacities. Essential Duties and Responsibilities include the following. Other duties may be assigned. Conduct experiments as defined by Engineering and other groups. Support development/R&D activities via conducting experiments and summarizing findings, building mechanical and opto-mechanical assemblies, etc. Assist in developing test plans. Execute test plans, summarize/analyze data and report findings. Utilize sophisticated metrology equipment including interferometers, laser position measurement equipment, ball-bar motion equipment, rotation measurement equipment, temperature, fluid flow and fluid pressure measurement devices. Communicate frequently with team members. Openly brainstorms with team members. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience – Currently enrolled in a Bachelor’s or Master’s degree program in Mechanical Engineering or a closely related field. Relevant coursework in areas such as machine design, dynamics, fluid mechanics, and magnetics. Previous internship or co-op experience in a mechanical engineering role a plus. Working knowledge of machine shop equipment and tools. Machining experience is a plus. Familiarity with a variety of measurement tools, data acquisition systems and sensors. Experience with Six Sigma methodologies a plus. Experience with Geometrical Dimensioning and Tolerancing methods a plus. Experience with CAD software for creating detailed mechanical designs, PTC CREO detailing experience a plus. Computer Skills: Experience with Excel or Mini-Tab to capture, graph, analyze and communicate test data is preferred. Basic word processing, spreadsheet, and presentation software skills are required. Demonstrated aptitude for learning new software. Technical - Strong technology perspective particularly related to the optics industry through prior experience. Travel – Travel is not a primary part of this job. The position is an hourly paid position with a pay range of $22.00 to $27.00 based on the candidates education level, and prior internship and project related experience. We would prefer a candidate who can work 40 hours a week during the internship period, but would consider a candidate interested in part-time (less than 40 hours). QED Technologies is an Equal Opportunity Employer

Job DescriptionCompany Description Founded in 1978, California Closets has built a reputation as the leader and design authority in premium space management, delivering custom-designed organizational solutions and exceptional service. We believe home is more than just a place — it should be a source of creativity, comfort, and connection. From beautiful walk-in closets and entertainment centers to versatile pantries and home offices, we design custom storage solutions that add value to your life and home by making space for what belongs. Think of it as ‘practical magic.’ Job Description The Installation Tech installs custom designed residential storage systems and accessories using a variety of luxury materials. A successful candidate will have experience with hand and power tools, measurements and the ability to provide exceptional customer service to our clients. What We Offer: California Closets has both company-owned and franchise locations. This location is company-owned, therefore earns the following benefits: • Health insurance – Medical, Dental, and Vision, • PTO days and paid holidays, • 401K retirement plan with company match, • Transporation from Company’s location to and from customer job sites will be provided, • Company tools and PPE provided, • Guaranteed 40 hours/week with overtime potential, • Day shift hours, • Grow your career with us – many promotional opportunities available Duties and Responsibilities: • Perform skilled and semi-skilled carpentry work to install custom storage systems such as closets, cabinets, offices, and other spaces in the home or commercial buildings., • Utilize company-provided CAD drawings\blueprints to install systems properly and efficiently., • Assemble and install systems of varying complexity., • Assists in the removal and installation of materials in customer homes., • Maintain shop tools and equipment in safe working order (tools are provided)., • Install systems independently or with team members depending on the size of the job., • Provide a high level of customer service for in-home installations., • Maintain safety standards at all time., • Responsible for driving to and from customer sites and operating a company-provided vehicles in a safe manner., • Perform other duties and responsibilities as assigned by the supervisor.Qualifications, • Must maintain a valid driver's license and clean driving record, • High School diploma or equivalent, • Experience with common hand and power tools, • Trade or vocational school experience desirable, • Cabinetry or carpentry skills desirable, • Strong verbal and written communication and listening skills, • Able to walk, lift 50 pounds, reach, stoop, stand, grasp, balance, climb stairs, kneel, and crouch Additional Information Find us on Facebook, YouTube, and Instagram We are an equal opportunity employer. We E-Verify. All your information will be kept confidential according to EEO guidelines. Privacy Policy: Terms and Conditions:

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Associate, PCB Parts Designer Job Code: 25479 Job Location: Rochester, NY Job Schedule: 9/80; Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: This person will contribute to the company’s success by supporting PCB part design activity enabling the development of the most advanced radio communication equipment in the world for the military and first responders. The PCB Parts Designer will effectively utilize EDA tools deployed at L3Harris to create and improve schematic symbols and decals for Printed Circuit Board mounted electronic components utilized on PCB assemblies in new and existing products. Essential Functions: \n • Utilize Siemens/Mentor PADS Designer and Layout software. Utilized AutoCAD mechanical software. \n, • Create and maintain schematic symbols for Electrical CAD (ECAD) libraries, referencing component vendor data sheets. \n, • Create and maintain copper pad footprints, solder mask, and solder paste patterns for ECAD library referencing component vendor data sheets, IPC standards, and internal L3Harris design guidelines. \n, • Create and maintain ECAD footprints for use by mechanical engineering. \n, • Ensure all requirements for fabrication, manufacturing, and assembly are met. \n, • Knowledge of CAD software tools. \n, • Knowledge of SMT and through-hole electronic components and packages used on PCB assemblies. \n, • Understands mechanical dimensioning and tolerancing. \n, • Excellent attention to detail. \n #LI-KW4 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Land Survey Crew Chief / $80k-$120k / Great Place To Work! This Jobot Job is hosted by: Mike Basile Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $80,000 - $120,000 per year A bit about us: The firm built it’s reputation on delivering quality design and performance for local municipalities and the Veterans Administration, working efficiently in partnership with many specialized firms and general contractors throughout the region. • Service Disabled Veteran Owned Business (SDVOB) providing Civil/Site, Building, and Fire Protection Engineering Services., • Civil, Architectural and Landscape Architecture Design and Consulting. Specializing in Space Planning, Historic Preservation, and Drafting., • Land Surveying Professional Services with Experience in Commercial, Federal and State. Land Surveying Services Provided include Topographic, Site/Utility, and Fathometric. Why join us? • Strong compensation & benefits, great culture • Our firm’s values include providing professional development opportunities for military veterans with service connected disabilities- military veterans of all experience are encouraged to apply. Professional Engineers experienced with one or more agencies such as New York State OGS/TWA/DOT/DASNY/SUNY and the Veterans Administration are also encouraged to apply Job Details Role Overview The Land Survey Crew Chief will lead field survey crews in support of boundary, topographic, construction, and infrastructure projects for municipal, commercial, and federal clients. This role is responsible for collecting accurate field data, supervising survey staff, coordinating with project managers and office staff, and ensuring that all survey work meets technical, safety, and quality standards. Key Responsibilities • Lead and manage field survey crews to perform boundary, topographic, ALTA/NSPS, utility, and construction stakeout surveys., • Operate and maintain survey instruments, including GPS/GNSS receivers, robotic total stations, digital levels, and data collectors., • Review field notes, sketches, and digital data to ensure completeness and accuracy prior to submission to CAD staff., • Collaborate with engineers, architects, and project managers to meet project requirements and deadlines., • Train, mentor, and supervise junior field crew members., • Ensure compliance with company safety procedures and OSHA standards while working in diverse site conditions., • Coordinate scheduling of survey fieldwork, equipment, and logistics. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.

Job Description M/E Engineering is interviewing for an Electrical Design Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Performs assignments designed to develop the skills of the Design Engineer., • Utilizes engineering principles and standard designs to develop project designs and layouts., • Works with Senior Engineer, Project Engineer, Group Manager, Associate and/or Principal., • Independently performs assignments after instructions as to the general results expected., • Receives guidance on unusual problems and supervisory approval on developed plans., • Assists in the preparation of contract documents., • Plans, schedules, conducts all phases of the work in a part of or a total project of moderate scope., • Performs conventional engineering work including standard designs., • Makes engineering calculations., • Develops elementary designs expanding on detailed schematic sketches., • Coordinates production and coordination with Senior Engineer/Designer or Project Engineer/Designer., • Associate Degree, Bachelor of Science Degree, or equivalent combination of education and experience. Powered by JazzHR VIBXwB62js

Linde Engineering North America LLC.Tonawanda, NY, United States | req22293.In this role, you will utilize project management methodologies, system and tools as defined by company.You will also understand the project schedule and work with project team to develop a fabrication plan that supports the

The Assistant Project Manager is accountable for ensuring that customer service is delivered by hiring, training, supervising and coordinating employees engaged in cleaning and maintaining facilities in his/her assigned account(s) in accordance with contract specifications.Assign duties and tasks to

Oversees and communicates project progression from inception to completion including design, permits, material delivery, labor schedules, and field installation.

About Us: EMCOR Services Betlem has been in the facilities management and mechanical contracting business for over 95 years, maintaining facilities, designing, building, and servicing HVAC, refrigeration, controls, ductwork, and piping systems for new construction, renovation, and retrofit projects.

Manages all phases of project, from design through direct occupancy. Ensures compliance with university standards for design and construction.

Since 1966, Paul Davis has been an industry leader in the areas of property damage mitigation, reconstruction and remodeling.With more than 370 offices in our franchise network, the company serves residential, institutional, and commercial customers and clients across the United States and Canada.We

The Assistant Project Manager is responsible for assisting the Project Manager with managing the project life cycle process on assigned projects.They must assist in obtaining project pricing, budgeting, estimating, detailing, management of subcontractors/vendors, and project schedules.Assists in mai

This position is responsible for the management of larger and more complex IT projects assigned, providing tactical management, administration and leadership throughout project teams.Salary range (depending on experience): $70k-$140k.Initiates large, complex projects following the defined project ma

High School Diploma or equivalent.Associates or Bachelor's degree a plus but not required.Years of Project Management Experience in Construction, Remodeling, or Restoration.Ability to multi-task and prioritize.High aptitude in Microsoft Office Suite and other software.Performance versus annual goals

Focus on the core content of the job post, removing all extra metadata and navigation elements.The job title and description are presented in a clean and beautiful format.

The Assistant Project Manager is responsible for assisting the Project Manager with managing the project life cycle process on assigned projects.They must assist in obtaining project pricing, budgeting, estimating, detailing, management of subcontractors/vendors, and project schedules.Assisting in m

As a Project Engineer specializing in Bridge design, your role will include preparing complete project documents for structural components of transportation projects; reviewing complete project documents for conformity and quality assurance; and coaching junior staff in the preparation of design cal

Project Manager I, Project Delivery.At ENFRA, we blend a rich history with a forward-looking vision.With over 100 years of experience, we are a pillar of stability in the energy infrastructure industry and a leader in innovative energy solutions.Our commitment to leveraging emerging technologies ens

As a Project Engineer specializing in Bridge design, your role will include preparing complete project documents for structural components of transportation projects; reviewing complete project documents for conformity and quality assurance; and coaching junior staff in the preparation of design cal

Spearheads the development and implementation of appropriate project metrics and outcomes during the design phase of new projects.

As a Project Engineer specializing in Bridge design, your role will include preparing complete project documents for structural components of transportation projects; reviewing complete project documents for conformity and quality assurance; and coaching junior staff in the preparation of design cal

Understanding of mechanical design philosophy and design process flow. Fundamental understanding of industry accepted design methods and practices, including design spaces/tradeoffs, test data analysis, and requirement/specification change processes. Demonstrated performance and proficiency in the e