Trabajos cad design en Gilbert, ArizonaCrear alertas

NX CAD Designer ( Chandler, AZ ) 15462. We are currently looking for an experienced Designer 4 to join our Mechanical Engineering Design team within the Launch Vehicle Division at our Chandler, AZ facility. The Designer 4 will work within the Design/Drafting group and will be responsible for checkin

Summary We are seeking an experienced Senior Instrumentation and Controls (I&C) Engineer with a Professional Engineer (PE) license to join our growing multidisciplinary Architectural & Engineering team. This role will focus heavily on semiconductor facility projects and requires deep technical expertise, strong coordination skills, and the ability to deliver high-quality engineering packages within a fast-paced project environment. The ideal candidate is proactive, detail-oriented, and comfortable working collaboratively with electrical, mechanical, process, and structural teams to support highly complex facility systems. Key Responsibilities Instrumentation & Controls Design • Develop complete I&C design packages, including P&IDs, control narratives, loop diagrams, wiring diagrams, instrument indices, panel layouts, and I/O lists., • Select, size, and specify instrumentation for systems such as ultrapure water, specialty gases, chemical distribution, HVAC, and process utilities., • Create sequences of operation (SOO) and develop detailed control logic aligned with client requirements., • Design and integrate control system architectures including PLC, DCS, SCADA, BMS, and EMS platforms., • Prepare technical specifications and engineering documents for construction and permitting. Project Coordination • Collaborate with multiple engineering disciplines to ensure complete and coordinated system designs., • Participate in design reviews, model coordination meetings, and constructability sessions., • Provide direction to CAD/Revit designers for instrument placement, routing, and system integration. Project Execution • Prepare and seal engineering drawings and documents using a valid PE license., • Assist with scope development, cost estimates, and proposal preparation for I&C project components., • Review vendor submittals and shop drawings for compliance with project requirements. Field Support & Commissioning • Provide on-site support including installation verification, calibration oversight, loop checks, and functional testing., • Troubleshoot instrumentation and control system issues during construction and commissioning., • Support development of punch lists and resolution of technical issues in the field. Quality, Codes & Standards • Ensure all designs comply with ISA, SEMI, NEC, NFPA, IEEE, and applicable local codes., • Maintain documentation integrity and support internal standards development. Client Interaction • Attend client meetings and design presentations as needed., • Communicate technical information clearly to clients, project managers, and multi-discipline teams., • Provide timely updates and proactively identify project risks or design changes. Required Qualifications • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Chemical Engineering, or related field., • Active Professional Engineer (PE) license (required)., • 5–10+ years of relevant engineering experience, preferably in semiconductor or advanced manufacturing environments., • Strong knowledge of instrumentation, controls, automation systems, and semiconductor facility processes., • Proficiency with I&C design tools, loop diagrams, P&IDs, instrument databases, and control system architecture., • Understanding of ISA standards, NEC, NFPA, and SEMI requirements., • Excellent communication, coordination, and problem-solving skills. Preferred Qualifications • Experience with tool install projects, process utilities, and advanced semiconductor facilities., • Experience working with PLC, DCS, SCADA, BMS, and EMS control platforms., • Familiarity with AutoCAD, Revit, and instrumentation design software., • Experience supporting commissioning, startup, and troubleshooting activities. Compensation: $120,000 - $180,000 (hourly pay) per year depending on experience Industrial Design offers competitive pay and full benefits including Health/Dental/Vision insurance (single and family), PTO, Paid Holidays and 401k. Affirmative Action/EEO statement – Industrial Design recruits, hires, employs, trains, promotes, and compensates individuals based on job-related qualifications and abilities. Industrial Design is an equal opportunity employer and values diversity. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other status protected by law. Applicants please note: This position requires US work authorization, and we are not looking for out of country/outsourced support or remote workers of any kind. This opening is for local candidates residing in the metro phoenix area or those willing to self-relocate to this area only. All positions listed are full time in office roles with no opportunity for hybrid or work from home accommodations. If you are looking to work remote, please do not apply.

Position Overview Prism is seeking an experienced Telecom Designer with a comprehensive understanding of structured of cabling, backbone and horizontal distribution systems, telecom spaces, and supporting infrastructure. This role requires the ability to independently design, coordinate, and problem-solve complex telecom systems with minimal to no supervision while collaborating with internal teams, clients, and other disciplines. Responsibilities: • Demonstrate a strong understanding of network topologies, architectures, and network types, • Design, evaluate, and optimize Backbone and Horizontal Distribution Systems., • Perform site surveys, capacity assessments, upgrade recommendations based on client and/or site needs., • Design building pathways and resolving complex routing with constructability in mind., • Develop and coordinate comprehensive cabling pathway designs, including cable tray, conduit, J‑hooks, plenum and non‑plenum spaces, and wall or barrier penetrations, • Perform fiber and copper infrastructure design, including fiber type and strand counts, conduit fill calculations, backbone layouts, cross‑connect and LIU schedules, and single- or multi‑building fiber one‑line diagrams, • Design and coordinate telecommunications spaces, including entrance facilities, equipment rooms, telecom rooms, enclosures, and data centers, • Design and coordinate telecom outlet locations using diamond studies, and wireless access point placement using heat mapping and CAD tools, • Review and verify product data submittals for compliance with construction documents and specifications, • Respond to RFIs and identify scope or design impacts in coordination with the Project Manager and System Owner, • Assist with design verification walks, construction coordination, and resolve field issues, • Coordinate designs with clients, owners, contractors, and other disciplines to ensure constructable solutions, • Perform other duties as assigned Qualifications: • Bachelor’s degree in electrical engineering or construction, • 3-5 plus years of telecom designer experience, • Knowledgeable of structured cabling systems (fiber and copper), Telecom standards, materials, and components, and facility data tables and documentation standards, • Able to make design decisions, solve complex technical problems, • Adapt to new situations and project requirements, • Strong coordination and communication skills, • Proficiency with CAD and design documentation, • Experience handling large-scale, complex telecom projects, • Ability to mentor others and contribute to standards and documentation best practices (preferred), • Telecom design experience in Commercial buildings, Campuses, Data Centers and Multi-building sites, • Experience working with construction teams and responding to installation challenges, • Familiarity with industry standards (BICSI, TIA, etc.) Why Prism • Work on complex, high-impact telecom projects, • Collaborative, technical design environment, • Opportunity to lead, mentor, and influence standards, • Growth-oriented team with long-term career potential

Job Title: Engineer Location: Chandler, AZ (~25% travel to FL) Contract Length: 09 Months (Potential Extension) Schedule: 8:00 AM – 5:00 PM Role Overview: This is an individual contributor role that requires the use of judgement in applying professional expertise and is expected to work independently with minimal supervision. Roles & Responsibilities: • Designs and validates manufacturing processes being transferred to a new location. Specifies precise product functional requirements; designs, tests and integrates manufacturing processes and fixtures; and evaluates the processes overall effectiveness, cost, reliability and safety., • Designs, develops, and executes process validation plans; creates and reviews material part specifications and bills of materials. Collaborates with internal manufacturing partners, contract manufacturers, and designers to optimize designs for manufacture ability., • Utilizes CAD (Computer Aided Design) or CAE (Computer Aided Engineering) systems to review and modify existing designs of engineering drawings. The job requires the ability to make judgment based on practice and previous experience., • Own a product line end-to-end; validation experience; equipment manufacturing background.

Manufacturing Process Transfer Engineer • Contract Duration: 9 months - Estimated to end 9/2026 (potential for extension), • Location: 100% Onsite in Chandler, AZ (85226), • Type: W2 contract (NO C2C OR THIRD PARTY), • Pay Rate – Negotiable depending on DIRECT-related experience up to $50 - $55 an hour, • Work Hours: 8:00 AM – 5:00 PM, • Work Authorization: Must be physically located in United States and have United States employment authorization documents WITHOUT CURRENT OR FUTURE sponsorship requirements. Sponsorship is NOT available NOW or in the FUTURE for this role. Key Responsibilities: • Own and manage a product line end-to-end, overseeing all stages from development through implementation, • Design and validate manufacturing processes being transferred to the new location, • Specify precise product functional requirements; design, test, and integrate manufacturing processes and fixtures, • Evaluate processes for effectiveness, cost efficiency, reliability, and safety, • Develop, execute, and document process validation plans, • Create and review material part specifications and bills of materials, • Collaborate with internal manufacturing partners, contract manufacturers, and designers to optimize designs for manufacturability, • Utilize CAD (Computer Aided Design) or CAE (Computer Aided Engineering) systems to review and modify existing engineering drawings and designs, • Prepare and review technical documentation related to validation and product management activities, • Work comfortably with manufacturing equipment in a hands-on environment, • Apply technical aptitude to troubleshoot, optimize, and enhance manufacturing operations Preferred Qualifications: • Experience with equipment validation, • Strong technical aptitude, • Familiarity with manufacturing processes and equipment, • Proficiency in CAD/CAE systems Important information: To be immediately considered, please send an updated version of your resume to . * (Kelly Services does not expense relocation/interview costs)

Manufacturing Process Engineer 6 month contract On-site in Chandler, AZ Must be able to work on a W2 Requirements • Design and validate manufacturing processes being transferred to a new location., • Specify precise product functional requirements., • Design, test, and integrate manufacturing processes and fixtures., • Evaluate process effectiveness, cost, reliability, and safety., • Design, develop, and execute process validation plans., • Create and review material part specifications and bills of materials., • Collaborate with internal manufacturing partners, contract manufacturers, and designers to optimize designs for manufacturability., • Utilize CAD (Computer Aided Design) or CAE (Computer Aided Engineering) systems to review and modify existing engineering drawings., • Own a product line end-to-end., • Work independently with minimal supervision and apply professional judgment based on practice and previous experience., • Travel approximately 25% to Florida (flexibility required)., • Support transfer activities from Lakeland to Chandler. Qualifications • Engineering degree required., • Validation experience., • Equipment manufacturing background., • University degree or equivalent practical knowledge gained through experience., • Understanding and application of procedures and concepts within own discipline., • Ability to make judgments based on practice and previous experience., • Typically requires a degree or equivalent and no experience.

Senior Manufacturing Engineer – Aerospace Location: Onsite in Tempe, AZ (open to relocation) About the Role: We are partnered with a well-established aerospace manufacturer specializing in advanced battery systems and energy storage solutions that support mission-critical applications across commercial, military, and general aviation. Their products are trusted in extreme environments where reliability, safety, and performance are non-negotiable. This Senior Manufacturing Engineer will play a key role in advancing manufacturing processes across complex electronics and battery product lines. The position is highly visible within operations and offers strong opportunities for professional growth within a global aerospace organization. What You’ll Do • Lead the development, optimization, and validation of manufacturing processes to improve quality, safety, and productivity in a regulated aerospace environment, • Partner closely with production supervisors and operators to ensure processes are efficient, repeatable, and compliant with AS9100 standards, • Design and implement tooling, fixtures, and jigs to support precision assembly and machining, • Provide hands-on technical support to manufacturing, troubleshooting equipment, process variation, and nonconforming material issues, • Drive continuous improvement initiatives using Lean and Six Sigma tools to reduce waste and increase throughput, • Analyze manufacturing costs and identify opportunities for automation, efficiency gains, and cost reduction, • Lead root cause and corrective action investigations (RCCA) and ensure sustainable solutions are implemented, • Improve and maintain manufacturing documentation including routings, work instructions, and process controls, • Support new product introductions by leading the transition from engineering development to full production, including process validation and tooling readiness, • Initiate and execute engineering change requests and change orders, • Collaborate with operations leadership to support long-term manufacturing strategy, capacity planning, and technology roadmaps, • Mentor junior engineers and technicians, fostering a culture of technical excellence and continuous learning, • Bachelor’s degree in Mechanical, Electrical, Industrial, Aerospace, or Manufacturing Engineering, • 5–7 years of manufacturing engineering experience within aerospace, defense, or another highly regulated industry, • Hands-on experience supporting new product introductions, • Strong background developing process routings, work instructions, and PFMEAs, • Master’s degree in an engineering discipline, • Experience in a structured manufacturing or operations leadership development program, • Lean Six Sigma certification, • Prior aerospace manufacturing experience, • Exposure to robotics, automation, or advanced manufacturing technologies, • CAD design experience Work Schedule & Physical Requirements • Standard business hours, Monday–Friday, with flexibility to support overtime as needed, • Ability to lift up to 25 lbs and remain seated or standing for extended periods, • Reasonable accommodations available for qualified individuals Compliance Requirement This role may involve access to ITAR-controlled data. Candidates must be a U.S. Person as defined by U.S. export control regulations or be eligible to obtain required government authorization. Work Environment This role includes time spent in both an office and manufacturing environment. Noise levels may be elevated at times, and exposure to typical manufacturing floor conditions should be expected.

Printed Wire Board Layout PWB ( Chandler, AZ ) 15546 12 Month Contract Pay rate: $50-75/hr W2, maybe more for the right candidate Onsite or Telecommute US Citizenship Required Responsibilities: • Design/Layout printed wiring boards (PWBs) for military/aerospace avionics and test applications., • Communicate project status to your direct Manager and the Program Engineering Manager., • Collaborate with the circuit design engineer and mechanical engineers to ensure proper form, fit, and function of the design., • Participate in Peer Reviews and Design Milestone reviews throughout the development process Basic Qualifications for Engineer – CAD CAM 3:, • Minimum 5 years recent PWB design layout experience using the Cadence Allegro design tool suite;, • AA/AS degree or other 2-year post high school training with a minimum of 5 years of relevant experience;, • Working knowledge of high density complex, multilayer boards (6-16 layers);, • Experience in the layout/routing of digital and analog circuits, including power circuits;, • Experience with layout/routing of high speed digital and controlled-impedance circuits (SERDES, DDR3/DDR4, etc);, • Experience with rigid-flex assemblies;, • Ability to prepare artwork (ODB++, Gerbers) for fabrication of PWBs;, • Extensive experience with footprint/symbol creation and library management;, • Understanding of IPC-2221 and IPC-7351 specifications;, • Ability to acquire security clearance., • This position requires the applicant to be a U.S. citizen. Candidates must have the ability to obtain and maintain a DoD Secret clearance per business requirements. Preferred Qualifications for Engineer – CAD CAM 3:, • Working understanding of the Printed Wiring Assembly manufacturing process;, • Experience with CAM350 and/or Valor DFM software tools;, • Experience with OrCAD Layout and Mentor PADS or Xpedition tool suites;

Job Description CNC Mill Prototype/Short Run Machinist - MUST HAVE PROGRAMMING EXPERIENCE If you are a highly motivated and experienced CNC Mill Machinist, the Machinist position at AeroSpec may be a great step for your career. This is a full time 1st shift position with hours of 7am-3:30pm with the opportunity for overtime. About AeroSpec, Inc. AeroSpec is a global leader in innovative design, engineering, and manufacturing of automated assembly and test machine systems. Core competences include advanced high speed motion controls, precision component placement, precision custom metrology systems, machine vision and robot & laser integration. AeroSpec is ISO 9001 Registered provides CE certifications, UL markings, and FDA Medical & Pharmaceutical validation. For details of our equipment portfolio and capabilities, visit AeroSpec at . Duties and Requirements • Must have minimum of 1 year CNC programming experience, • Minimum of 3 years’ experience operating CNC Vertical Mills such as Haas, Doosan, Mazak, Yam or SMG, • Program, Setup and Machine prototype and short run parts from engineering blueprints using HAAS VMC Mills., • Proficient reading blue prints and understanding specifications and GD&T., • Capable of reading of reading manual measuring instruments., • Knowledge and understanding of manufacturing QA procedures and processes., • Ability to program mills by entering instructions, including zero and reference points, setting tool registers, offsets, compensation., • Analyze and diagnose machining, programming and tooling problems., • Good communication and interpersonal skills. Must be able to read, write and speak English fluently., • Experience with CAD programs such as AutoCAD or SolidWorks a plus., • Knowledge of programming Mills using Mastercam or SURFCAM is a definite plus., • Manual mills and lathe experience a plus. Benefits • Competitive wage, • Team oriented work environment; skills development and mentorship, • Established, 40-year-old Engineering/Manufacturing Company, • Top rated benefit package including medical, dental, vision, disability, life insurance, PTO, etc., • 401k with 50% company match, • Tuition reimbursement plan AIgTBG5Kuz

Job DescriptionJob Title: Production SupervisorJob Description We are seeking a dedicated and experienced Production Supervisor to manage and lead our production team. The ideal candidate will oversee the production floor, ensuring all processes meet high quality standards and safety regulations. They will play a key role in optimizing production flow and implementing continuous improvement initiatives. Responsibilities • Manage the production team and operators., • Assign tasks to team members and monitor employee performance., • Provide and develop coaching, training, and development opportunities for team members., • Ensure production schedules are adhered to, making resource adjustments as needed., • Coordinate with various cross-functional teams to optimize the production flow., • Enforce safety regulations and promote a safe working environment., • Investigate any incidents and implement corrective actions., • Implement and lead continuous improvement efforts to increase efficiency and reduce waste., • Maintain accurate records of production outputs, downtime, and employee performance., • Prepare daily, weekly, and monthly production reports., • Monitor, develop, and support standard work activities for yourself and team members., • Identify and address any quality-related issues in the manufacturing process., • Communicate production status and issues to all stakeholders.Essential Skills, • Proven experience as a Production Supervisor or similar role in a manufacturing environment., • Strong leadership and team management skills., • Experience with continuous improvement and Lean manufacturing principles., • Proficiency in ERP/MES systems (e.g., Epicor, Oracle, SAP)., • Strong communication and interpersonal skills for coordinating with various departments., • Ability to manage multiple tasks and adapt to changing priorities.Additional Skills & Qualifications, • Bachelor’s degree or related field preferred., • Certification in Lean, Six Sigma, or other relevant process improvement frameworks preferred., • Knowledge of CAD and other design and simulation software. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Mesa,AZ. Application Deadline This position is anticipated to close on Mar 6, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description A rapidly growing advanced manufacturing company is opening a new, state-of-the-art production site in Mesa, Arizona and is hiring an experienced Production Supervisor to support this expansion. This is a hands-on leadership role reporting to the Operations Manager, responsible for overseeing daily manufacturing operations and ensuring production targets are met across safety, quality, delivery, and cost. The ideal candidate brings strong floor leadership, a continuous improvement mindset, and experience driving team performance in a fast-paced manufacturing environment. What You’ll Be Responsible For * Lead and supervise production operators and day-to-day shop floor activity * Assign work, manage priorities, and monitor performance to ensure production goals are achieved * Coach, train, and develop employees to build a strong, reliable production team * Ensure production schedules are met by adjusting labor, workflow, and resources as needed * Partner cross-functionally with Operations, Quality, Engineering, and other teams to optimize production flow * Promote and enforce safety standards, ensuring a safe and compliant work environment * Investigate incidents and implement corrective actions to prevent recurrence * Drive continuous improvement initiatives focused on efficiency, waste reduction, and standardization * Track production output, downtime, labor performance, and operational metrics * Prepare and deliver daily, weekly, and monthly production reporting * Maintain and reinforce standard work practices and operational discipline * Identify and resolve quality issues within the manufacturing process * Communicate production status, risks, and constraints to leadership and stakeholders What We’re Looking For * Proven experience as a Production Supervisor (or similar manufacturing leadership role) * Experience working in an environment with safety, quality, and delivery KPIs * Proficiency with ERP/MES systems (SAP, Oracle, Epicor, or similar) * Strong leadership, communication, and team management skills * Ability to manage shifting priorities in a high-growth environment * Lean manufacturing experience strongly preferred (Lean, Six Sigma, or similar) * Familiarity with quality tools such as SPC and standard work processes * Working knowledge of CAD or design tools is a plus #hc222166

Job Description Who are we? XNRGY Climate Systems is a North American leader in sustainable design and advanced manufacturing of custom air treatment systems focused on research and energy development contributing to the reduction of carbon footprint. We are excited to announce the opening of our new technology headquarters in Mesa, Arizona in 2025. This expansion reflects our commitment to growth and innovation in the climate solutions industry. As part of this expansion in the US, XNRGY is seeking a qualified and experienced on site Production Supervisor to join the team. Reporting to the Operations Manager, this position will be responsible for overseeing the day-to day manufacturing operations for the Mesa XNRGY production site. As part of your role, you will be ensuring that production meets all safety, quality, delivery, and cost related metrics. You will be critical in leading and supervising production teams to meet all objectives and drive a lean culture focused on continuous improvement. An overview of your responsibilities: • Lead and manage the production team and operators., • Assign tasks to team members and monitor employee performance., • Provide and develop coaching, training, and development opportunities for team members., • Ensure production schedules are adhered to, making resource adjustments as needed to meet schedules., • Coordinate with various cross-functional teams to optimize the production flow., • Enforce safety regulation and promote a safe working environment., • Investigate any incidents and implement corrective actions., • Implement and lead continuous improvement efforts for increase efficiency and waste reduction., • Maintain accurate records of production outputs, downtime, and employee performance., • Prepare daily, weekly, and monthly production reports., • Monitor, develop, and support standard work activities for yourself and team members., • Identify and address any quality related issues in the manufacturing process., • Communicate production status and issues to all stakeholders. What you'll need, among other things! • Proven experience as a Production Supervisor or similar role in the manufacturing environment., • Proficiency in ERP/MES systems (i.e. Epicor, Oracle, SAP, ect.)., • Strong leadership and team management skills., • Certification in lean, Six Sigma, or other relevant process improvement frameworks are preferred., • Strong communication and interpersonal skills for coordinating with various departments., • Ability to manage multiple tasks and adapt to changing priorities., • Knowledge of CAD and other design and simulation software., • Familiarity with statistical process control (SPC) and other quality assurance tools. Do you have other qualifications? Tell us what is unique about you that is a great addition to the team. Does this sound like you? We look forward to receiving your application. Why choose XNRGY! • Competitive salary with STIP (short term bonus incentive plan)., • Medical, dental, and vision insurance., • 401 K., • Employee assistance program., • Paid time off., • A dynamic team, open to change to bring its color., • Modern state of the art facility with industry 4.0 technology in Mesa, Arizona., • Being part of a green industry transformation., • Fast-growing dynamic environment where entrepreneurial spirit is recognized., • Inclusive and diversity-friendly environment., • Career advancement: XNRGY promotes internal promotion., • Electric charging stations. At XNRGY Climate Systems, we are committed to fostering a diverse and inclusive workplace. We believe that a variety of backgrounds, experiences, and perspectives are essential to driving innovation and achieving success. We welcome individuals who share our passion for sustainability and who are eager to contribute to a more positive environmental future. Are you ready to join our driven team? Join a company that values courage, community, climate, customer and coherence. Be part of carving our footprint and joining a winning team! Company DescriptionXNRGY Climate Systems is a North American leader in sustainable design and advanced manufacturing of custom air treatment systems. We are focused on research and energy development, contributing to the reduction of carbon footprint. XNRGY is excited to announce the opening of our new technology headquarters in Mesa, Arizona, in 2025, with a second manufacturing site launching next door in 2026. This expansion reflects our continued commitment to growth, innovation, and leadership within the climate solutions industry, supporting the AI industry.XNRGY Climate Systems is a North American leader in sustainable design and advanced manufacturing of custom air treatment systems. We are focused on research and energy development, contributing to the reduction of carbon footprint. \r\n\r\nXNRGY is excited to announce the opening of our new technology headquarters in Mesa, Arizona, in 2025, with a second manufacturing site launching next door in 2026. This expansion reflects our continued commitment to growth, innovation, and leadership within the climate solutions industry, supporting the AI industry.

Proficiency with CAD software (Unigraphics or SolidWorks preferred). Support die and fixture design/modeling for investment casting patterns and finishing processes.

Job Description Job Title: CAD Designer Beginner Department: Sales Reports to: Joe Romano Location: Tempe, AZ Employment Type: (Full-time/Exempt) Why Benson At Benson, we're more than just a company; we're a dedicated team making a real difference. As leaders in fire protection and life safety solutions, we ensure the safety of our clients' facilities with top-tier services and unwavering standards. Join our culture of excellence and innovation to grow personally and professionally while impacting the safety of our communities. What will my role entail in the position Summary? We are seeking a beginner CAD Designer in life safety systems. If this is a career you're interested in, please reach out. You will support the design and layout of fire alarm, fire sprinkler, and related low-voltage systems. This role plays a critical part in producing accurate, code-compliant drawings that support permitting, installation, and long-term system performance. The ideal candidate is highly organized, technically skilled, and comfortable collaborating with engineers, project managers, and field teams. Key Responsibilities: List the essential duties of the position. You will learn these. • Develop detailed CAD drawings for life safety systems, including fire alarm, fire sprinkler, mass notification, and other low-voltage systems, • Learn to prepare construction documents, shop drawings, and as-built drawings in compliance with NFPA, IFC, IBC, and local AHJ requirements, • Interpret architectural, mechanical, and electrical plans to coordinate system layouts, • Collaborate with engineers, project managers, and field technicians to ensure constructability and accuracy, • Revise drawings based on redlines, field changes, and permit review comments, • Maintain drawing standards, title blocks, and file organization, • Support permitting and submittal packages as required, • 1 year of CAD drafting experience, preferably in fire protection or life safety systems. Right out of college is preferred, • Ability to read and interpret construction documents, • Ability to sit/stand for extended periods, • Ability to lift up to 25] pounds, • on-site expectations, • Office environment with standard business hours, • Occasional jobsite visits may be required, • Adherence to company policies, procedures, and applicable laws. At Benson Systems, we believe great people deserve great support. When you join our team, you’re not just accepting a job, you’re becoming part of a company that invests in your well-being, growth, and success. • Outstanding Benefits – Enjoy comprehensive health insurance for you and your family, including 100% company-paid employee-only medical coverage, plus robust dental and vision plans, a 401(k), and even pet insurance., • We Invest in Your Expertise – We pay for required certifications and license renewals so you can focus on advancing your skills without added financial stress., • Generous Paid Time Off – Take time to recharge, travel, or be with the people who matter most. We value work-life balance., • Competitive Compensation – Your work matters, and we make sure you’re rewarded with a compensation package that reflects your contributions., • Career Growth Opportunities – Build a future with us through ongoing professional development and advancement opportunities., • A Family-First Culture – Enjoy company gatherings where families are welcome, creating a supportive, inclusive environment that truly feels like a community. EEO Statement: Benson Systems is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. All qualified applicants will receive consideration for employment without regard to any of these protected characteristics. #Benson123

Job Description Position Summary: Conceives, investigates, evaluates, and makes recommendations for new equipment, tooling and processes to improve safety, reliability, capacity and reduce costs. Performs CNC Programming of complex Aerospace components, analysis, design, and/or assembly related to manufacturing or industrial engineering projects. Investigates and analyzes unique or highly technical manufacturing or industrial engineering assignments and provides technical assistance in establishing operational procedures and methods. Performs technical surveillance of a complex nature in the control of product, design concepts, and specification requirements. Evaluates engineering changes and determines appropriate labor or equipment standards to meet specification requirements. Utilizes systematic problem solving and data collection to identify and resolve problems, including driving cost and downtime reduction. Leads and/or participates in health, safety, environmental, production, material control, Sig Sigma and R&D project teams. Writes weekly activity and project reports, develops action plans, and generates work instructions, test procedures and other documentation to support production operations. Essential Duties and Responsibilities include, but are not limited to: • Develop aircraft fabrication, assembly, and installation work instructions by evaluating engineering drawings, tool designs, process specifications, and equipment specifications, • Evaluate and recommend tools and equipment for the support of manufacturing, • Perform root cause corrective action for the support of manufacturing, • Train and work with other engineers and planners, • Prioritize and adjust work flow to meet customer needs, • Participate and incorporate Lean Manufacturing and initiatives, • Provide liaison support for production floor via work instruction and manufacturing bill of materials modifications, • Understand and be aware of customer schedules and current engineering resources to match the needs and delivery dates on the schedule, • Other duties as assigned Qualifications: • Experience and Education:, • Bachelor’s degree with 2-4 years of experience, or 5+ years of experience., • 3 + years of CNC machinist experience, • Technical Skills:, • Ability to identify and resolve problems in a timely manner or develop alternative solutions, • CAD/CAM CNC Mill programming of complex aerospace components, • Proficiency in NX or Mastercam preferred, • workplace holding and fixture design/illustration, • Experience with GibbsCam a plus, • Proficiency in CNC Lathe programming a plus., • Proficient in the use of all Microsoft Office programs and Windows operating system, • Ability to thrive in a changing, fast-paced growing and dynamic business, • Detail oriented and able to manage multiple projects simultaneously, • Strong written and verbal communication skills, • Excellent organization skills and attention to detail, • Physical Requirements:, • Extended screen time, • Long periods of sitting, • Potentially long hours Supervisory Responsibilities: None. Travel Required: Minimal Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law. Company DescriptionManufacturing excellence starts from within. Our teams collaborate and share knowledge across our facilities. We thrive through continual learning and mentoring. From apprenticeship to leadership, our people are proud of the important work we do.Manufacturing excellence starts from within. Our teams collaborate and share knowledge across our facilities. We thrive through continual learning and mentoring. From apprenticeship to leadership, our people are proud of the important work we do.

Job Description Job Title: Senior Manufacturing Engineer Job Summary: The Senior Manufacturing Engineer is responsible for overseeing production processes, ensuring efficiency, quality, and cost-effectiveness in manufacturing operations. This role works collaborates cross-functionally with R&D, quality and the broader operations team to develop, optimize and validate manufacturing processes to bring new products to operational maturity. The Senior Manufacturing Engineer also provides technical leadership, mentoring, and guidance to ensure best practices in manufacturing excellence. Responsibilities • Develop and improve manufacturing processes to increase efficiency and reduce waste., • Provide technical leadership and support to the manufacturing team., • Analyze production data to identify areas for improvement in quality, cost, and throughput., • Provide guidance and expertise in the selection and installation of new equipment and technologies., • Perform risk assessments and develop contingency plans to mitigate production interruptions., • Ensure compliance with safety, regulatory, and quality standards throughout the production process., • Train and mentor junior engineers and technicians to improve their skills and productivity., • Other duties as assigned. Skills Experience Required Skills: • Bachelor of Science degree in Mechanical, Electrical, Industrial, Aerospace or Manufacturing Engineering, • Experience with new product introduction, • Experience developing process routings, work instructions, and PFMEAs. Preferred Qualifications: • Master’s degree in Mechanical, Electrical, Industrial, Aerospace or Manufacturing Engineering, • Prior aerospace manufacturing experience, • Must be able to lift and/or move up to 25 lbs. and be able to sit and/or stand for long periods of time. OTHER QUALIFICATIONS: Ability to safely and successfully perform essential job functions consistent with the ADA, FMLA, and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to maintain reasonably regular, punctual attendance consistent with the ADA, FMLA, and other federal, state and local standards. Compliance with all policies. This position requires use of and access to information which is subject to the International Traffic in Arms Regulations (ITAR). Accordingly, all Process Engineers must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Temporary Resident, Political Asylee, or Refugee. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regularly required to stand or sit, and move about the facility. Employee may occasionally lift or move up to 35 lbs. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work usually performed in an office setting and/or production setting. The noise level in the work environment is usually moderate unless noted by safety signage.

Job DescriptionDescription: A.T. Still University's Arizona School of Dentistry & Oral Health (ATSU-ASDOH) is seeking a full-time, non-exempt Digital Dental Lab Technician on the Mesa, Arizona campus. The Digital Dental Lab Technician supports the fabrication and delivery of digitally designed dental prosthetics, appliances, and models within the dental school’s academic laboratory. Under the supervision of the Digital Dental Lab Manager, this role is responsible for operating CAD/CAM equipment, preparing digital files, post-processing 3D printed and milled items, and maintaining lab systems. The technician ensures high-quality output, supports student and faculty digital learning, and helps advance the integration of digital workflows into clinical and preclinical education. Duties & Responsibilities: Digital Case Management and Production • Process incoming digital files (STLs) for design, milling, or 3D printing., • Fabricate crowns, bridges, splints, surgical guides, study models, and other prostheses using CAD/CAM workflows., • Perform post-processing, finishing, and polishing of printed and milled restorations and appliances., • Operate digital dental equipment including intraoral scanners, desktop scanners, design software (e.g., 3Shape, Exocad), milling units, 3D printers, and curing ovens., • Perform daily maintenance and calibration of lab equipment and report malfunctions or service needs to the Lab Manager., • Assist with basic CAD design of restorations and guides, or preparation of files for external or internal design., • Navigate digital dental software for reviewing, modifying, and exporting design files., • Assist students and faculty in submitting digital cases and understanding lab workflows., • Support educational demonstrations, open lab hours, and digital dentistry workshops as needed., • Monitor lab materials such as resin, burs, blocks, and other consumables used in fabrication., • Assist with receiving, storing, and tracking supplies and materials., • High school diploma or equivalent., • 2+ years of experience in a dental laboratory, with at least 1 year in digital workflows., • Proficiency in using CAD/CAM software and equipment (e.g., 3Shape, Exocad, CEREC,Roland, Asiga, Formlabs)., • Strong technical skills and attention to detail., • Completion of dental laboratory technology training or equivalent certification., • CDT (Certified Dental Technician) or training in digital dental technology., • Experience working in an academic or healthcare environment., • Digital dental fabrication and workflow knowledge, • Technical troubleshooting and equipment care, • Organization and production efficiency, • Collaboration with faculty, students, and staff, • Adaptability to evolving technologies and educational needs A.T. Still University (ATSU) does not discriminate on the basis of race, color, religion, ethnicity, national origin, sex (including pregnancy), sexual orientation, age, disability, or veteran status in admission or access to, or treatment or employment in its programs and activities.

Job Description WHO ARE WE? Horsepower Automotive Group (HPAG), is a leader in the growing automotive aftermarket industry. When you join HPAG, you'll have a unique opportunity to be a part of our exciting and rapidly growing, multi-brand organization. Our brands include Addictive Desert Designs, DV8 Offroad, Flatline Van Co., and Rago Fabrication. We support a collaborative environment and value open participation from individuals with different ideas, experiences, and perspectives. Are you ready to be part of our future? HPAG has a position open for a CAD Designer. We are seeking a passionate and creative individual to join our multi-faceted Product Development Team. You will be responsible for developing, testing, and optimizing product designs for the offroad aftermarket. Our ideal candidate has a background in design for manufacturing and experience with sheet metal and tube weldments/structures. Experience designing machined parts is also preferred. We work solely in Solidworks, extensive experience with this program is necessary Responsibilities and essential job functions include, but are not limited to the following: • Design and develop vehicle components., • Test components in real world scenarios., • Identify and resolve engineering challenges, including troubleshooting product failures and implementing corrective actions., • Create packaging designs and technical drawings for manufacturing., • Maintain detailed documentation of product specifications, design changes, and testing results, • Stay informed about industry trends, competitor products, and customer feedback to inform design decisions and drive innovation., • Manage quality control documentation and implementation with our QA partners and factories., • Ability to work in a fast-paced work environment and be a team player to accomplish the company goals and adjust to rapidly changing priorities., • Self-motivated, assertive, and responds to production metrics., • Extensive Solidworks experience, • Knowledge and experience of sheet metal and tube assemblies and weldments, • Design for manufacturing experience, • Strong written and verbal communication skills, • Teamwork and collaboration abilities, • Manufacturing/building/fabrication experience is a plus., • Contributes to building a positive team spirit and puts success of team above own interests, • Ability to read, write, and speak English fluently., • Health Insurance, • Dental insurance, • Life Insurance, • Vision Insurance, • Employee discount, • Paid time off, • 8 hour shift, • Day shift, • Monday to Friday Work Location: In-Person at our Chandler, AZ facility It is the policy of Addictive Desert Designs, and its affiliated companies to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law.

Job DescriptionSalary: AtSyberJet, we arent just building planeswere redefining the speed of business. As an emerging leader in aerospace, weve stripped away the corporate bureaucracy to make room for pure, unadulterated innovation. Creativity is our currency and 'good enough' doesn't exist. If you thrive in a culture of continuous evolution and want the autonomy to design, build, and fly the future of aviation, youve found your home. Here, your fingerprints will be on the most advanced aerospace systems in the world, pushing the limits of whats possible in precision engineering and high-performance flight. Job Description: SyberJet Aircraft is seeking a Weights & Balance Engineer with strong experience in aircraft weight management and center-of-gravity (CG) analysis. The candidate will be responsible for managing and controlling aircraft weight and balance across all programs, supporting new designs, modifications, and certification activities while working closely with project engineers, discipline leads, and cross-functional teams. This role blends technical ownership, project oversight, and regulatory compliance, and is ideally suited for a weights engineer who understands the full aircraft lifecycle, from early conceptual design through certification and continued operational safety, and who has direct experience supporting FAA Part 23 and/or Part 25 aircraft programs. Key Responsibilities: Weights & Balance Expertise: • Serve as the company Subject Matter Expert (SME) for aircraft weights and balance., • Develop, maintain (database), and control aircraft mass properties, including weight statements, CG envelopes, moments, and inertia calculations., • Perform and oversee weight impact assessments for design changes, modifications, and new installations across all aircraft systems., • Support weight optimization efforts by identifying opportunities for mass reduction while maintaining safety, performance, and certification compliance., • Lead weight engineering activities across multiple aircraft programs and projects., • Develop and maintain weights schedules, milestones, and deliverables aligned with overall program timelines., • Coordinate with project engineers and functional leads to ensure weight and aircraft center of gravity targets are established, tracked, and met., • Prioritize and sequence weight-related tasks to optimize program schedules and reduce technical and certification risk., • Support and oversee FAA certification activities related to weights and balance., • Apply 14 CFR Part 23 regulations and associated guidance material to weights and balance compliance., • Define and document the weights and balance certification basis, means of compliance, and compliance matrices., • Prepare, review, approve, and release certification documentation, including weight and balance reports, loading manuals and limitations, CG envelopes and mass properties documentation, ground and flight test support documentation, compliance findings and approval artifacts, • Ensure aircraft-level weight and balance data complies with regulatory requirements and supports approved operating limitations., • Coordinate with engineering teams to ensure design changes are properly reflected in approved weight and balance data., • Identify weight growth risks and CG margin risks early and develop mitigation strategies., • Manage weight data, configuration changes, and documentation using Teamcenter, Jira, and Confluence., • Utilize weight tracking tools, spreadsheets, databases, and CAD-based mass properties to maintain accurate configuration control., • Promote a weight-conscious culture across engineering disciplines and programs. Qualifications: Education: • Minimum of 810 years of experience in aircraft weights and balance engineering., • Direct experience managing aircraft mass properties, CG analysis, and weight tracking on certified aircraft programs., • Strong knowledge of FAA certification requirements related to weights and balance, including Part 23 regulations and guidance material., • Proven ability to manage weight data across multiple projects and configurations., • Experience with Catia or Siemens NX and Teamcenter., • Experience with Agile Development using Jira sprint methodology. Team Player: Ability to work collaboratively in a team environment, demonstrating strong interpersonal and leadership skills. What We Offer • Competitive salary and benefits package., • Opportunities for professional growth and development., • A collaborative, engineering-driven, innovative work environment., • The opportunity to work on cutting-edge aircraft development and certification programs with a highly skilled team of professionals.

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of multi-disciplinary engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we're headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. ANS has quickly become a major player in solar energy, battery storage, and broader renewable energy engineering space. The company offers a comprehensive suite of services, covering project development, engineering, procurement and construction, operations and maintenance, financing, and M&A. ANS aims to redefine the conventional relationship between engineers and clients, prioritizing agility, collaboration, and a deep understanding of client challenges. Specializing in design analysis, detailed engineering, and development support for solar and energy storage projects across the United States, the company, while historically focused on geotechnical and electrical engineering, is further diversifying into the entire value stream of Renewable Development. ANS has differentiated itself through a highly customer-centric approach to their services; this is evident in their high customer retention, ability to command some of the highest premiums in the market, and market penetration of ~15% despite being a relatively lean team. Overview: It is an exciting time to join ANS. We are seeking an experienced and hands-on Director of Transmission Line Engineering (servant leader) to join our growing team. This is a player/coach role with tremendous opportunity for growth. The Director has full responsibility for organizing, executing, and leading an engineering organization in the successful execution of a diverse range of complex engineering projects and services in a team-oriented environment. As a business leader, you will collaborate with your team and support staff, to drive advancements in the Renewables Industry, focusing on Solar and Battery Energy Storage projects as well as Utility Interconnections. Key Responsibilities:· Strategic Leadership: The successful candidate will provide strong leadership, overseeing team management, staffing, planning, training, and resource development to ensure the successful execution of projects. This leader will drive the delivery of transmission line projects ensuring they meet quality standards and client specific requirements. Additionally, this role will be responsible for establishing and communicating short- and long-term goals, with clear KPIs to guide performance and project success. · Cross-Department Collaboration: Work closely with internal stakeholders, across multiple departments (and geographies) to ensure project execution to support company goals and business objectives. Work closely with other departments driving excellence in the overall execution and client experience at ANS. · Innovation: This role demands a forward-thinking mindset, staying open to new ideas, technologies, and ways of working. It requires a willingness to challenge the status quo, explore innovative solutions, and continuously seek improvements to drive progress and efficiency. Qualifications and Skills • Knowledge of technical applications and software required to review plan and profiles, sections, details, and sag and tension charts for construction drawing sets., • Comprehensive knowledge of electrical engineering principles, industry standards, and codes with a passion for transmission line engineering design., • Ability to develop, follow, interpret and apply internal, client, and industry procedures and standards to complex design situations and provide guidance to staff in implementation., • Ability to develop, review and evaluate design alternatives based on experience, standards, and codes to solve constructability and design challenges and provide direction to staff., • Ability to drive business success in coordination with Business Development, Project Management, and Sr Leadership with a deep understanding of proposals, financials, and relationship implications to company success., • Ability to lead client interactions either from an office or field environment to answer technical and business questions, drive solutions, and mitigate negative impacts in stressful situations., • Excellent communication skills, high emotional intelligence, and an innate ability to collaborate with a variety of stakeholders (technical and non-technical alike)., • Experience with and understanding of modeling software for poles and structures, sag and tension, transmission line routing and load modeling, grounding, lightning, and basic electrical calculations or modeling preferred. Intermediate PLS-CADD/POLE/TOWER, PSSE, CAD and PDF editor knowledge strongly preferred.Requirements, • BS in Electrical, Structural, or Mechanical Engineering from an accredited institution or equivalent Engineering BS degree. Preference to Power specific programs., • Professional Engineer License, • 15+ years of experience in transmission line design and engineering., • Ability to Travel 25%+ and hold a Passport

Job DescriptionSalary: About Us: SyberJet is an up-and-coming aircraft manufacturer dedicated to pushing the boundaries of innovation and precision in the design and manufacturing of advanced aerospace systems and aircraft. Our team is committed to excellence, creativity, and continuous improvement in all aspects of our work. Job Description: We are seeking a talented and experienced Mechanical Design Engineer to join our innovative team. The successful candidate will have a solid background in mechanical design within the aerospace sector, with proficiency in Computer Aided Design (CAD) and Teamcenter PLM. Preferred candidates will also have experience with highly parametric modeling techniques, 3D electrical harness routing, FEA, and CFD. Key Responsibilities: • Mechanical Design: Design and develop complex aerospace components and systems, ensuring compliance with technical specifications, performance standards, and regulatory requirements., • CAD Modeling: Use CATIA V5 and/or Siemens NX for 3D modeling, assembly design, and drafting. Produce detailed engineering drawings and specifications., • Product Lifecycle Management: Manage product data, track design changes, and ensure documentation is current and accessible using Teamcenter, Jira, and Confluence., • 3D Electrical Harness, Cable, and Fluid Systems Routing: Design and route 3D electrical harnesses, flight control cables, and fluid lines within aerospace systems, ensuring accuracy and adherence to design requirements., • Publications/Interfaces: Implement and manage CATIA Publications and/or NX Interfaces with WAVE Link Control for complex assemblies, ensuring robust and flexible design configurations., • Collaboration: Work closely with cross-functional teams, including manufacturing, quality assurance, and project management, to integrate designs into production seamlessly., • Problem Solving: Analyze and resolve design issues, offering innovative solutions to engineering challenges., • Testing and Validation: Participate in prototype testing and validation to ensure designs perform under various conditions., • Continuous Improvement: Contribute to process improvements and best practices within the design and development team. Qualifications: • Education: Bachelors degree in Mechanical Engineering or a related field., • Experience: Minimum of 5 years of experience in mechanical design within the aerospace, automotive, or similarly complex product development industry., • Software Skills: Proficiency in CATIA V5 or Siemens NX and Teamcenter is mandatory., • Preferred Experience:, • 3D electrical harness, cable, and/or fluid systems routing., • CATIA Publications for linked reference management or NX Interfaces with WAVE Link Control., • FEA experience, especially within Simcenter 3D Nastran., • CFD experience., • Agile Development using Jira Sprint Methodology., • Drafting or MBD using GD&T principles., • Technical Knowledge: Strong understanding of aerospace materials, manufacturing processes, and industry standards., • Analytical Skills: Excellent problem-solving skills with the ability to analyze complex technical data and provide effective solutions., • Communication: Strong verbal and written communication skills, with the ability to effectively present and document technical information to various stakeholders., • Team Player: Ability to work collaboratively in a team environment, demonstrating strong interpersonal skills. Preferred Qualifications: • Previous involvement in aerospace certification processes and standards (e.g., FAA, EASA)., • Project management experience or certification. What We Offer: • Competitive salary and benefits package., • Opportunities for professional growth and development., • A collaborative and innovative work environment., • The chance to work on cutting-edge aerospace projects with a talented team of professionals.

Job Description Nammo Defense Systems, Inc., a defense contractor, is the primary USA operation of the Nammo Group (Nammo AS). Nammo Defense Systems Inc. (NDS) develops, manufactures, and supports Shoulder Launched Munitions (SLMs), energetic material solutions such as aircraft emergency escape systems, actuation devices, rocket motors, warheads, and composite solutions including carbon fiber tubes and composite aerospace structures. JOB OVERVIEW: Manufacturing Engineers at NDS Mesa analyze, design, develop, and implement methods to produce Nammo products that support the warfighter. The Manufacturing Engineer is responsible for the process, tooling, work instructions, and training required to deliver product safely, efficiently, and on time. How you will be rewarded as our Manufacturing Engineer: • Competitive compensation, • Monday-Thursday work week working four 10-hour days (off on Fridays), • Generous paid time off and Holiday Pay, • Medical, Dental and Vision Insurance, • 401(K), employee assistance programs, health savings account KEY RESPONSIBILITIES: • Apply engineering principles to ensure safety in manufacturing processes that contain propellants, pyrotechnics, and/or explosives, • Tooling design and documentation, • Provide hands-on assembly training to operations team, • Evaluate existing equipment and / or systems for methods to improve safety, performance, efficiency, and reliability, • Identify and mitigate risks associated with critical assembly operations, • Apply working knowledge of product design and assembly to the manufacturing process, • Define maintenance for equipment and tooling through coordination with maintenance team, • Identify and champion IR&D and continuous improvement projects, • Coordinate and perform all necessary validation and / or process engineering evaluations as needed for manufacturing equipment, • Review and provide feedback on product designs to ensure manufacturability, • Author and maintain product assembly work instructions, • Troubleshoot and resolve tooling and equipment electrical and mechanical issues, • Author and present oral presentations outlining/summarizing progress on selected projects and programs to both internal and external customers., • Participate in and support internal and external audits COOPERATION This role requires collaboration across internal teams and with external stakeholders. LEVEL OF DECISION MAKING This position requires daily autonomous decision-making capabilities when working with both internal and external customers. SKILLS & QUALIFICATIONS: • BS/MS in engineering discipline or physics with ability to perform basic engineering analyses (stress, deflection, flow rate, pressure drop, and tolerance stack-ups), • 3+ years of experience designing electro-mechanical manufacturing equipment using 3D CAD software, • 3+ years of experience working with pneumatics, controls, sensors, and PLC’s, • 3+ years of experience with SCADA systems using Ignition (or similar) is preferred but not required, • Solid understanding of metal working tolerances produced by milling, grinding, turning, and laser/water jet cutting, • Experience with Lean Manufacturing and applying statistics in a manufacturing setting, • Experience designing, installing, and qualifying production equipment including hand tools, fixtures, gages, and semi-automated equipment, • Capable of providing hands-on support and troubleshooting of assembly equipment in a production environment, • Proficiency at authoring technical documents such as test plans, test reports, manufacturing procedures, and project reports, • Knowledge and experience with selection of materials commonly used in tools, gages, and assembly fixtures, • Basic understanding and experience in Design for Manufacturing (DFM), Design of Experiments (DOE), Failure Mode Effects Analysis (FMEA), and process hazard analysis (PHA), • Ability to obtain BATF approval to engage in certain explosive operations COMPETENCIES: • Excellent communication and collaboration skills, • Strong problem-solving and critical-thinking abilities, • Action oriented with ability to work in fast-paced environments, • Leadership or teamwork abilities, • Technical writing WORKING CONDITIONS: • Full-time on-site position., • This position may require travel on an as-needed basis., • Work with explosives, pyrotechnics, and solid rocket propellant devices., • This role may involve working in diverse settings and conditions. Note: Due to US Export Control laws and regulations; applicants selected for employment must show proof of a U.S. Person status before employment may begin.

Job DescriptionSalary: SyberJet is an up-and-coming aircraft manufacturer dedicated to pushing the boundaries of innovation and precision in the design and manufacturing of advanced aerospace systems and aircraft. Our team is committed to excellence, creativity, and continuous improvement in all aspects of our work. Job Description: SyberJet Aircraft is seeking a Senior Propulsion & Fuel Systems Engineer with strong FAA certification and systems safety experience to lead and coordinate the integration of advanced propulsion and fuel systems on our aircraft programs. This role blends technical engineering leadership, project oversight, and regulatory compliance responsibilities, and is ideally suited for a propulsion engineer who has contributed directly to FAA Part 23 or Part 25 programs and understands the full life cycle of propulsion system development, integration, and certification. You will act as the project engineer for powerplant and fuel systems development interfacing with vendors and guiding independent electrical and mechanical design teams to ensure the final design is safe, certifiable, and optimized for performance and manufacturability. Key Responsibilities: Propulsion & Fuel System Integration: • Lead the integration of new turbofan engines and associated fuel systems into the aircraft design., • Define and manage system-level requirements, interfaces, and design constraints for propulsion, fuel systems, and bleed air., • Guide supplier selection and coordination, ensuring design alignment and certification readiness., • Ensure mechanical and electrical subsystems are harmonized with engine and fuel system integration needs., • Serve as the technical lead for propulsion and fuel systems certification efforts., • Coordinate with FAA ACOs and DERs (Designated Engineering Representatives) on compliance planning and issue resolution., • Develop and contribute to compliance documentation, including means of compliance matrices, certification plans, compliance checklists, and engineering reports., • Author, support, and review System Safety Assessments (SSAs), including FHA, FTA, and SSA documents per ARP4761 guidance., • Support propulsion and fuel system ground and flight test programs., • Lead root-cause analysis and corrective actions for any propulsion-related anomalies or discrepancies during testing., • Manage product data, track design changes, and ensure documentation is current and accessible using Teamcenter, Jira, and Confluence. Problem Solving: • Contribute to process improvements and best practices within the design and development team. Qualifications: Education: • Minimum of 8 years of experience in aircraft turbofan propulsion system design and integration, with at least 5 years supporting FAA certification (Part 23 or Part 25)., • Demonstrated experience supporting or leading System Safety Assessments., • Solid understanding of FAA certification processes, including working with FAA DERs or as an ODA member., • Working knowledge ofaircraft fuel system design, propulsion system controls, and engine bleed air systems (particularly for anti-icing and pneumatic integration). Software Skills: • Experience with Simulink, MATLAB, or engine performance simulation tools is desired., • Model-based systems engineering (MBSE) tools and methodologies., • Agile Development using Jira Sprint Methodology., • Working knowledge of engine control integration, FADECs, electrical loads, and engine nacelle design., • Project Management Technical Knowledge: • Ability to work collaboratively in a team environment, demonstrating strong interpersonal skills. What We Offer: • Competitive salary and benefits package., • Opportunities for professional growth and development., • A collaborative, engineering-driven, innovative work environment., • The chance to work on cutting-edge aerospace projects with a talented team of professionals. How to Apply: Interested candidates are encouraged to submit their resume, cover letter, and a portfolio of relevant work to . Please include Senior Propulsion & Fuel Systems Engineer Aerospace Industry in the subject line of your email.

Job Description Who We Are: Praxis Resources is a fast-growing provider of custom manufacturing, prototyping, and repair services, specializing in the development and production of innovative technological solutions. From concept to completion, we are committed to delivering high-quality, tailored products that meet the unique design and functionality needs of our clients. Who We’re Looking For: We are seeking a skilled Machinist with CAD/CAM programming experience to join our manufacturing team. This role involves programming, setting up, and operating CNC equipment to produce high-quality parts across a variety of projects and industries. The ideal candidate is detail-oriented, technically strong, and enjoys collaborating in a fast-paced, hands-on environment. Responsibilities • Program, set up, and operate CNC milling and/or turning machines, • Create and modify CAD models and CAM toolpaths to support production and prototyping, • Interpret engineering drawings, GD&T, and technical specifications, • Select appropriate tooling, fixtures, and machining strategies, • Perform first-article inspections and ensure parts meet quality standards, • Troubleshoot machining and programming issues to improve efficiency and quality, • Collaborate with engineering, manufacturing, and quality teams, • Maintain a clean, safe, and organized work environment Qualifications • Experience as a Machinist with hands-on CNC machining, • Proficiency in CAD/CAM software (e.g., Fusion 360, Mastercam, SolidWorks CAM, or similar), • Strong understanding of machining processes, materials, and tooling, • Ability to read and interpret blueprints and GD&T, • Experience with tight tolerances and precision components, • Strong problem-solving skills and attention to detail Preferred Qualifications • Experience with 3-, 4-, or 5-axis CNC machines, • Background in aerospace, defense, medical, or high-precision manufacturing, • Experience with additive manufacturing or hybrid workflows, • Familiarity with continuous improvement or lean manufacturing practices What We Offer: • Comprehensive benefits package consisting of Medical, Dental and Vision. Praxis Resources contributes 95% of the cost for employees and dependents. Eligibility is 1st of the month following date of hire, • Supplemental benefits are available which include Voluntary Life Insurance, Short Term Disability and Long Term Disability., • Paid Time Off, • Paid Holidays, • A collaborative, team-oriented work environment

Job Description Nammo Defense Systems, Inc., a defense contractor, is the primary USA operation of the Nammo Group (Nammo AS). Nammo Defense Systems Inc. (NDS) develops, manufactures, and supports Shoulder Launched Munitions (SLMs), energetic material solutions such as aircraft emergency escape systems, actuation devices, rocket motors, warheads, and composite solutions including carbon fiber tubes and composite aerospace structures. JOB OVERVIEW: With independent judgment and discretion, manages the Detail Design and Drafting group as well as Document Control. How you will be rewarded as our Manager, Configuration: • Competitive compensation, • Monday-Thursday work week working four 10-hour days (off on Fridays), • Generous paid time off and Holiday Pay, • Medical, Dental and Vision Insurance, • 401(K), employee assistance programs, health savings account KEY RESPONSIBILITIES: • Directs and coordinates activities of the Detail Design (and Drafting) department including product design, NDS’s solids modeling and drafting standards, engineering design data management, and CAD proficiency., • Implement and maintain configuration management practices throughout the organization., • Conduct detailed department planning., • Review annual department operating expense budget and adhere to annual budget., • Ensure jobs are carried out to or above customer expectations and quality standards., • Cross train department employees to ensure continuity of operations and schedule achievement., • Ensure that NDS personnel are trained on Document Control procedures., • Ensure that processes and procedures are in compliance with industry standards., • Ensure that Documentation meets industry standards and contractual requirements., • Review procedures and documentation annually to assure effective and efficient applications., • Ensure all work activity is documented per company procedure., • Understand product structure, physical item hierarchies, and manage Product Baselines., • Coordinate work assignments for Detail Design (and Drafting)., • Provide central contact point for Detail Design (and Drafting)., • Assist in training Project Engineering and other distributed users of the NDS CAD system., • Provide labor estimates for new or re-draw of existing products., • Ensure that all drawings adhere to NDS standard operating procedures, ANSI/ASME (ASME Y14.100), and MIL standards (MIL-STD-31000)., • Develop and maintain NDS CAD systems operating procedures., • Establish design requirements with Project, Manufacturing, and/or Quality Engineering, • Work with Program Team to change/improve product design documentation for use by suppliers, in-house teams, and customers., • Develop SOPs and continuously improve processes for configuration management (based on CMII theory)., • Provide primary PLM interface to cross functional leadership, • Responsible for all aspects of Document Control., • Coordinates with the Contracts Department to assure that all customers' and sub-contractors' documentation conform to NTI contract requirements., • Maintains historical archives of NDS product data., • Plays instrumental role in quality system audits in order to sustain company certification., • Manage day-to-day PLM activities including planning and oversight of product data management tools, • Provide primary PLM interface to cross functional leadership, • Continuously improves Document Control procedures. LEVEL OF DECISION MAKING This position requires the ability to make daily autonomous decisions. High level decision making and leading and coaching a team on best practices are imperative to the role. SKILLS & QUALIFICATIONS: Required: • Bachelor’s degree (BS) shall be from a four-year college or university. MBA may be considered equivalent to a MS degree with respect to years of experience., • Ability to gain BATF approval COMPETENCIES: • Excellent communication and collaboration skills., • Strong problem-solving and critical-thinking abilities., • Ability to work in fast-paced environments., • Leadership or teamwork abilities. WORKING CONDITIONS: • Full-time on-site status., • This position may require travel on an as-needed basis., • This position may require working in diverse settings and conditions., • This position may require working in diverse settings and conditions. Note: Due to US Export Control laws and regulations; applicants selected for employment must show proof of a U.S. Person status before employment may begin.

Job Description Ardurra is seeking a Civil Engineer in Training to join our team at one of our Arizona office locations! Primary Function: Under general supervision, performs assignments of limited scope which require the application of standard techniques, procedures, and criteria in carrying out a sequence of related design engineering tasks. Assignments involve some unusual or difficult problems requiring job knowledge and abilities beyond entry level. Primary Duties: • Prepares plan details and outlines, identifies quantities of materials, cost estimates and performs calculations for a specific segment of a project., • Assists in preparation of technical specifications., • Evaluates vendor bids and drawings to assure compliance with specifications., • Reviews and approves design drawings within defined limits., • Prepares technical reports or sections of larger reports., • From time to time, performs field tests & measurements, collects field data., • Bachelor’s Degree in Civil Engineering from an accredited university or college, • Engineer-in-Training certificate (any state), • Experience with Civil 3D CAD software While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-LC

Job Description We are seeking a Tool Designer / Machinist to join our aerospace manufacturing team. This role is responsible for designing, analyzing, and refining custom tooling, fixtures, dies, and mechanical systems that support precision manufacturing. The ideal candidate has a strong background in tool and die, CAD-based mechanical design, and hands-on machining and tool room expertise required to produce prototypes, validate new tooling, and modify or repair existing tools for reliable production performance, with the ability to collaborate closely with engineering and production teams. What You’ll Do • Design detailed CAD drawings, layouts, and technical documentation for custom tooling, fixtures, dies, and mechanical assemblies, • Create schematics and technical views showing component relationships and system functionality, • Collaborate with engineers, machinists, and production teams to resolve design and manufacturability challenges, • Review material dimensions and specifications, assign material numbers, and verify compatibility, • Revise and improve tooling designs to address production issues, enhance functionality, and reduce cost, • Apply mathematical calculations (geometry, trigonometry, tolerances) to develop accurate tooling specifications, • Annotate drawings with instructions and notes; develop operation and maintenance documentation as needed, • Produce scale and full-size blueprints for manufacturing and inspection, • Create technical illustrations for manuals, work instructions, and maintenance guides, • Set up and operate manual and/or CNC mills, lathes, or grinders as needed for tool fabrication, • Perform fitting, assembly, and functional validation of new tooling, • 3+ years of experience in tool design, machining, or tool & die manufacturing, • 2+ years of hands-on experience using CAD software (Kubotek, KeyCreator, SolidWorks, or similar), • Experience designing fixtures, dies, and tooling for aerospace manufacturing, including tube assemblies, • Hands-on experience fabricating, modifying, or repairing tooling, • Strong understanding of GD&T, tolerance stack-up, and mechanical design principles, • Ability to interpret technical drawings, specifications, and manufacturing requirements, • Strong problem-solving skills with a practical, production-focused mindset, • Experience in regulated manufacturing environments (AS9100 preferred), • Ability to machine to tight tolerances, • Comprehensive medical coverage, vision, dental, • Paid sick leave and paid vacation

Job Description Location: Tempe, Arizona Travel: ~15% Employment Type: Full-Time Compensation & Benefits • Expected salary range (AZ): $90,000–$120,000, depending on experience, • Health, dental, and vision benefits, • Paid time off and holidays We’re looking for a technically skilled and field‐savvy Field Applications Engineer to support our product line of glass shower doors, interior doors, and shower pans. This role is ideal for someone who understands manufacturing processes, enjoys solving problems, and can confidently support installers, contractors, and customers. You’ll serve as the bridge between our engineering, manufacturing, and field installation teams—helping ensure our products perform exactly as designed. Qualifications • Experience in manufacturing engineering, preferably with glass, glazing, doors, or building products, • Hands-on installation experience in construction or specialty building materials, • Strong mechanical aptitude and ability to read technical drawings, • Excellent communication and problem-solving skills, • Willingness to travel up to 15%, • Knowledge of lean manufacturing or continuous improvement principles, • Experience with CAD or technical documentation Technical & Engineering Support • Provide expert-level understanding of manufacturing processes for glass, doors, and shower systems, • Review product designs, installation requirements, and technical specifications, • Support installers and contractors during onsite installations, • Diagnose and resolve product or installation issues in the field, • Conduct site visits (approx. 15% travel) to ensure proper installation practices Customer & Partner Support • Serve as the technical point of contact for customers, builders, and distributors, • Deliver product training, installation guidance, and best practices, • Assist with warranty evaluations and technical documentation Cross-Functional Collaboration • Work closely with project management, manufacturing, quality, and product development teams, • Communicate field insights to drive continuous improvement, • Participate in product testing and validationCompany DescriptionWe’re a dynamic, diverse, and creative team driven by strong relationships and a passion for delivering excellence. Recognized as an industry leader, our respected organization manufactures innovative construction products for hospitality projects nationwide. As a rapidly growing firm, we partner with renowned global brands and leading architecture and design firms.We’re a dynamic, diverse, and creative team driven by strong relationships and a passion for delivering excellence. Recognized as an industry leader, our respected organization manufactures innovative construction products for hospitality projects nationwide. As a rapidly growing firm, we partner with renowned global brands and leading architecture and design firms.

Job Description Position Summary: Must have previous CNC Machining Experience! Manages and directs engineering department resources and activities. Technical approval responsibility for the design of current production work and new product development activities. Develops and recommends corporate engineering policies and procedures consistent with company objective, including, but not limited to, new product testing procedures, problem solving, and training of engineering personnel. Manages engineering department’s assets, hardware and software, and any of the other related programs or systems within the engineering department. Coordinates with technical support personnel to conduct prototype runs for products or processes. Provides technical responsibility for planning, organizing and coordinating test procedures on current and future designs. Communicates with company personnel on projects, priorities, timetables and budgets as required. Interacts with customers and/or vendors. Develops short term and long term goals of design engineering and research and development. Essential Duties and Responsibilities include, but are not limited to: • Directs department activities to design new products, modify existing designs, improve production techniques, and develop test procedures., • Resolves problems using solutions that involve new techniques, technologies, or concepts., • Analyzes technology trends, human resource needs, and market demand to plan projects., • Confers with management, production, and marketing staff to determine engineering feasibility, cost effectiveness, and customer demand for new and existing products., • Forecasts operating costs of department and directs preparation of budget requests., • Advanced skills with Mastercam, Gibbs Cam, Espree or other CAM software, and CNC machine programming, setup, and operations., • Ability to machine parts to specification of .1mm to .0005mm tolerances working from CAD files, mechanical drawings, and sketches, • Ability to read, understand, and create technical mechanical drawings, sectional views, part notes, dimensions, and tolerances, • Conversational knowledge of G-Code., • Advanced skills in workpiece fixturing., • Expertise calculating/estimating machine cycle times, determining cost effective operation sequences, machinability, and feasibility, • Geometric Dimensioning and Tolerancing knowledge, • Comprehensive understanding of Multi Axis milling, turning, grinding, cutting, EDM, etc. and detailed functional knowledge of most common machine shop tools and machines, • Advises management of new developments which may affect profit, schedule, costs, customer relations, and/or inter-departmental relations., • Provides direction and example for interpretation and application of company policies and procedures to the engineering activities., • Maintains a working knowledge of new technologies which may improve operations and develops recommendations accordingly., • Maintains a working knowledge of safety policies and regulations to ensure duties of self and others are performed in a safe manner., • Experience and Education:, • Bachelor’s degree with 8-10 years of experience, or a Master’s degree with 6-8 years of experience, • At least 2 years in a supervisory capacity, • Technical Skills:, • Ability to identify and resolve problems in a timely manner or develop alternative solutions, • Proficient in the use of all Microsoft Office programs and Windows operating system, • Ability to thrive in a changing, fast-paced growing and dynamic business, • Detail oriented and able to manage multiple projects simultaneously, • Strong written and verbal communication skills, • Excellent organization skills and attention to detail, • Physical Requirements:, • Extended screen time, • Long periods of sitting, • Potentially long hours Supervisory Responsibilities: • Supervises, coordinates, provides leadership to and reviews the work of assigned staff., • Directly supervises individual contributors in technical positions and/or entry level professionals., • Estimates staffing needs., • Assigns work., • Recommends candidates for employment and makes recommendations for termination., • Conducts performance evaluations and salary reviews for assigned staff., • Responsible for the application of company policies. Travel Required: Occasional Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law. Company DescriptionManufacturing excellence starts from within. Our teams collaborate and share knowledge across our facilities. We thrive through continual learning and mentoring. From apprenticeship to leadership, our people are proud of the important work we do.Manufacturing excellence starts from within. Our teams collaborate and share knowledge across our facilities. We thrive through continual learning and mentoring. From apprenticeship to leadership, our people are proud of the important work we do.

Job Description Acoustics Engineer I (Entry-Level / Early Career) TECHLITE – A Division of The Zippertubing Company Tempe, AZ | Full-Time | Onsite Day Shift: Mon–Thurs 5:00am–3:30pm Also known as: acoustic consultant, acoustician, sound engineer, architectural acoustician TECHLITE, a division of The Zippertubing Company, is a U.S.-owned manufacturer with more than 50 years of experience designing and producing high-performance acoustic panels and specialty insulation systems. We serve architectural, industrial, transportation, and commercial markets where sound control, thermal performance, and material innovation matter. As a small, agile manufacturing organization, our team works closely across engineering, production, and customer-facing functions to deliver customized, performance-driven solutions. We value curiosity, collaboration, and hands-on problem solving. TECHLITE is seeking an Acoustics Engineer I to support the design, testing, and development of acoustic and insulation products. This is an excellent opportunity for a recent graduate or early-career engineer (1–2 years of experience) who is eager to apply engineering fundamentals in a real-world manufacturing environment. This role blends acoustic analysis, product development, materials science, and cross-functional collaboration, offering hands-on exposure to engineered-to-order solutions. Key Responsibilities: • Support the design and development of acoustic panels and insulation systems, • Perform acoustic calculations and analysis related to sound absorption, transmission loss, and noise reduction, • Assist in product testing, validation, and documentation, • Interpret customer specifications and technical requirements, • Collaborate with manufacturing to ensure designs are practical, scalable, and cost-effective, • Support prototype development and product improvement initiatives, • Work with Sales and Business Development to help translate technical performance into customer-ready solutions, • Contribute to technical documentation, reports, and product data sheets, • Bachelor’s degree in Mechanical Engineering, Acoustical Engineering, Architectural Engineering, or related field, • 0–2 years of experience in acoustics, materials engineering, or product development (internships/co-ops welcomed), • Foundational understanding of:, • Sound absorption and transmission principles, • Acoustic measurement concepts (NRC, STC, etc.), • Materials behavior and performance, • Strong analytical and problem-solving skills, • Proficiency in Excel and familiarity with CAD software preferred, • Ability to work collaboratively in a small-team manufacturing environment, • Internship experience in architectural acoustics, manufacturing, or materials testing, • Exposure to ASTM acoustic testing standards This role is partially sedentary; however, some filing is required. This would require the ability to lift files, open filing cabinets, and bend or stand on a step ladder as necessary during their shift. The employee must occasionally lift and/or move up to 25 pounds. The position involves sitting, talking, hearing, climbing stairs, using the elevator, and walking throughout the 8-10-hour shift. Hand-eye coordination is necessary to operate tools, drafting instruments, computers, printers, and various equipment. This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. This individual will also be responsible for all other duties assigned by the department manager or executive management. Duties, responsibilities, and activities may change at any time with or without notice. This classification for this role is exempt. Benefits • 80 hours of vacation, • 48 hours of sick time, • Paid Parental Leave, • Medical, • Dental, • Vision, • Flex Spend (Allegiance), • 401K w/match, • Full Time, in office position – Tempe, AZ (near Priest and University), • Monday to Thursday (5:00am – 3:30pm) Direct Applicants Only: The company is handling all recruitment for this position internally. Third-party recruiters or staffing agencies are asked to refrain from contacting the company at this time. Unsolicited submissions will not be considered. For more information about Techlite, please visit our website: . • Techlite, a division of Zippertubing® uses E-Verify., • Criminal background check (Required), • English (Required), • US work authorization is a must, • Employer will not sponsor applicants for employment visa status.

Job Description A rapidly expanding advanced manufacturing organization is hiring an experienced Process Engineer to support a new U.S. production facility in Mesa, Arizona. Reporting to the Process Engineering Manager, this role will focus on improving and sustaining manufacturing processes to increase efficiency, reduce waste, and ensure consistent product quality. The ideal candidate has strong hands-on manufacturing engineering experience, thrives in a fast-paced environment, and is comfortable driving process improvements using data, lean principles, and structured problem-solving tools. Key Responsibilities * Develop, maintain, and improve Standard Work, SOPs, work instructions, and visual process aids * Drive process improvements using production data to improve throughput, quality, and efficiency * Ensure documentation is accurate, easy to follow, and aligned with lean manufacturing principles * Analyze manufacturing performance data to identify bottlenecks, inefficiencies, and recurring issues * Maintain process control plans and ensure alignment with quality requirements * Define and specify equipment, tooling, and fixtures required to meet process capability needs * Partner with Engineering, Operations, and Quality to support new product launches and production readiness * Lead problem-solving efforts using industry-standard methodologies (root cause analysis, corrective actions, etc.) * Support implementation of best practices including lean flow, automation, and modern manufacturing technologies Qualifications * Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, or related field * 5+ years of manufacturing engineering experience with increasing responsibility * Proven background supporting Design for Manufacturing (DFM) and New Product Introduction (NPI) * Strong analytical skills with the ability to interpret production data and make data-driven decisions * Strong communication and cross-functional collaboration skills * Ability to manage multiple priorities and adapt quickly in a changing production environment * Familiarity with CAD and design/simulation tools is preferred Why This Opportunity * Join a growing manufacturing organization in a modern facility environment * High-impact role supporting production scale-up and continuous improvement * Strong cross-functional exposure (engineering, operations, quality, product launch teams) * Opportunity to implement lean best practices, automation, and process modernization #hc222167

Job Description Position Summary: Conceives, investigates, evaluates, and makes recommendations for new equipment, tooling and processes to improve safety, reliability, capacity and reduce costs. Performs CNC Programming of complex Aerospace components, analysis, design, and/or assembly related to manufacturing or industrial engineering projects. Investigates and analyzes unique or highly technical manufacturing or industrial engineering assignments and provides technical assistance in establishing operational procedures and methods. Performs technical surveillance of a complex nature in the control of product, design concepts, and specification requirements. Evaluates engineering changes and determines appropriate labor or equipment standards to meet specification requirements. Utilizes systematic problem solving and data collection to identify and resolve problems, including driving cost and downtime reduction. Leads and/or participates in health, safety, environmental, production, material control, Sig Sigma and R&D project teams. Writes weekly activity and project reports, develops action plans, and generates work instructions, test procedures and other documentation to support production operations. Essential Duties and Responsibilities include, but are not limited to: * Develop aircraft fabrication, assembly, and installation work instructions by evaluating engineering drawings, tool designs, process specifications, and equipment specifications * Evaluate and recommend tools and equipment for the support of manufacturing * Perform root cause corrective action for the support of manufacturing * Train and work with other engineers and planners * Prioritize and adjust work flow to meet customer needs * Participate and incorporate Lean Manufacturing and initiatives * Provide liaison support for production floor via work instruction and manufacturing bill of materials modifications * Understand and be aware of customer schedules and current engineering resources to match the needs and delivery dates on the schedule * Other duties as assigned Qualifications: * Experience and Education: * Bachelor’s degree with 2-4 years of experience, or 5+ years of experience. • 3 + years of CNC machinist experience Technical Skills: * Ability to identify and resolve problems in a timely manner or develop alternative solutions • CAD/CAM CNC Mill programming of complex aerospace components, • Proficiency in NX or Mastercam preferred, • workplace holding and fixture design/illustration, • Experience with GibbsCam a plus, • Proficiency in CNC Lathe programming a plus. Proficient in the use of all Microsoft Office programs and Windows operating system * Ability to thrive in a changing, fast-paced growing and dynamic business * Detail oriented and able to manage multiple projects simultaneously * Strong written and verbal communication skills * Excellent organization skills and attention to detail * Physical Requirements: * Extended screen time * Long periods of sitting * Potentially long hours Supervisory Responsibilities: None. Travel Required: Minimal Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

Job Description A rapidly growing advanced manufacturing organization is hiring a Mechanical Designer to support the development of engineered equipment used in highly technical, mission-critical environments. This role is ideal for a detail-oriented designer who can translate requirements into accurate 3D models and technical drawings that directly support manufacturing, assembly, and installation. You will work closely with production, quality, engineering, and suppliers to develop practical, cost-effective design solutions and ensure documentation is clear, controlled, and build-ready. Key Responsibilities * Create detailed 3D CAD models, engineering drawings, and submittal packages in alignment with project requirements and internal standards * Support manufacturing by resolving design-related build issues and updating drawings to improve manufacturability and assembly efficiency * Partner with Quality to investigate nonconformities, support corrective actions, and provide design solutions when customer communication is required * Select mechanical components and materials, working with suppliers and external partners to evaluate options and refine concepts * Interpret design briefs, specifications, and applicable standards to develop practical and innovative product solutions * Collaborate with engineering teams throughout the product development lifecycle, including design updates, improvements, and change implementation * Produce detail, assembly, and arrangement drawings required for equipment to be manufactured, assembled, installed, and maintained * Develop layouts to define dimensions, tolerances, clearances, and proper component fit and function * Maintain controlled documentation including drawing revisions and Bills of Materials (BOMs) in an organized and traceable manner * Participate in design reviews and contribute to continuous improvement initiatives within the engineering function Qualifications * Bachelor’s degree in Industrial Engineering or a related discipline * Practical experience using at least one 3D CAD software package (Autodesk Inventor, SolidWorks, CATIA, Creo, or similar) * Autodesk Inventor experience is a plus, but not required (training may be available for strong candidates) * Strong attention to detail with proven analytical and problem-solving skills * Proficiency with Microsoft Office (Word, Excel, PowerPoint) * Fluent in English (written and verbal) * Ability to clearly communicate technical design concepts to cross-functional teams (production, quality, purchasing, sales, etc.) * Comfortable managing multiple priorities under deadlines while maintaining accuracy and quality * Strong organizational and time-management skills with disciplined documentation practices * Able to work effectively both independently and within a collaborative team environment * Commitment to safety standards, documentation best practices, and company policies #hc222583

Job Description HPAG has a position open for a CAD Designer. We are seeking a passionate and creative individual to join our multi-faceted Product Development Team. You will be responsible for developing, testing, and optimizing product designs for the offroad aftermarket. Our ideal candidate has a background in design for manufacturing and experience with sheet metal and tube weldments/structures. Experience designing machined parts is also preferred. We work solely in Solidworks, extensive experience with this program is necessary Responsibilities and essential job functions include, but are not limited to the following: • Design and develop vehicle components., • Test components in real world scenarios., • Identify and resolve engineering challenges, including troubleshooting product failures and implementing corrective actions., • Create packaging designs and technical drawings for manufacturing., • Maintain detailed documentation of product specifications, design changes, and testing results, • Stay informed about industry trends, competitor products, and customer feedback to inform design decisions and drive innovation., • Manage quality control documentation and implementation with our QA partners and factories., • Ability to work in a fast-paced work environment and be a team player to accomplish the company goals and adjust to rapidly changing priorities., • Self-motivated, assertive, and responds to production metrics., • Extensive Solidworks experience, • Knowledge and experience of sheet metal and tube assemblies and weldments, • Design for manufacturing experience, • Strong written and verbal communication skills, • Teamwork and collaboration abilities, • Manufacturing/building/fabrication experience is a plus., • Contributes to building a positive team spirit and puts success of team above own interests, • Ability to read, write, and speak English fluently., • Health Insurance, • Dental insurance, • Life Insurance, • Vision Insurance, • Employee discount, • Paid time off, • 8 hour shift, • Day shift, • Monday to Friday Work Location: In-Person at our Chandler, AZ facility

Job Description CIVIL CAD DRAFTER - Land Development Exciting Growth Opportunity in Arizona! Dibble's Land Development team is expanding, and we're looking for a talented and driven Civil CAD Drafter to join us in Mesa, Goodyear, or Tucson. At Dibble, our employees benefit from a top-tier benefits program, a healthy work-life balance, ongoing professional development, engaging company events, and meaningful community involvement. We're seeking a candidate who thrives in a dynamic environment, can manage multiple high-impact projects simultaneously, and consistently delivers quality work. The ideal candidate will demonstrate sound decision-making that supports both project success and company goals. ACCOUNTABILITIES: • Perform engineering design using AutoCAD Civil3D, • Communicate design approaches and decisions with associated supporting documentation to Project Engineers and Project Managers, • Prepare development plans including site, utility and grading & drainage construction documents, • Tabulate and address review comments on deliverables provided by Client, Project Engineers or Project Managers, • Provide quality reviews of own work in accordance with Company's quality control program and processes, • Preparation of engineering drawings from sketches, field books, verbal description, and specifications, • Coordination of CAD files and design with internal and external team members Minimum Qualifications: • Prior AutoCAD and Civil 3D experience, • Relevant/similar Land Development Experience, specifically commercial/site development, • Excellent oral and written communication skill, • Ability to work independently and self-motivated, • Ability to prepare construction documents using good design judgement and meeting agency design guidelines, • Ability to work in a fast paced and ever-changing environment on multiple projects simultaneously and must be a team player, • Associate's Degree in drafting or similar education preferred, • A minimum of 1-3 years of experience as a CAD Drafter required LOCATION: Can be located in Goodyear, Mesa, or Tucson. COMPENSATION: Compensation is based on the successful candidate's individual education, qualifications, and experience. ABOUT DIBBLE Founded in 1962, we provide a full range of multi-disciplinary services to public and private sector clients across Arizona, Colorado, and the Southwestern United States. Our broad market expertise offers the ability to deliver complete engineering, planning, and surveying solutions from concept to closeout. Our business is built on honesty, ethics, accountability, quality, and service and our sense of purpose drives our commitment to serve our employees, clients, partners, and communities. Every day, our team of professionals collaborate, develop, and produce great results. They are the reason we get things done so we know how essential they are. For our amazing team, we offer great benefits as well as ensure a positive and uplifting company culture in which our employees can continue to learn, grow, and perform to their highest potential. READY TO JOIN OUR TEAM? If you feel that you would be right for this opportunity, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Dibble is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Job Posted by ApplicantPro

Job Description Join BPG Designs, LLC in Tempe, AZ as a Full Time CAD Technician, where your engineering creativity meets hands-on construction! This hy brid role immerses you in a dynamic environment alongside a team of passionate professionals, all dedicated to innovation and excellence. With a pay rate of up to $23 per hour, depending on experience, you’ll be recognized for your contributions while advancing your skills in a fast-paced industry. Work within a culture that values integrity and safety, while also encouraging a fun and energetic atmosphere. By being part of our forward-thinking team, you’ll help shape exciting projects and see your designs come to life. You can get great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, Competitive Salary, and Paid Time Off. If you’re looking for a challenging position that offers both professional growth and an engaging work environment, this is the perfect opportunity for you! Your role as a CAD Technician As a newly hired CAD Technician at BPG, you can expect a collaborative and engaging day-to-day experience. Your schedule will be from 7 AM to 4 PM, Monday through Friday, allowing for a consistent work routine. Each day, you will be responsible for creating detailed technical drawings, collaborating with project managers and engineers to ensure accuracy and adherence to design specifications. Expect to participate in team meetings to review project progress and address any challenges. You’ll also engage in reviewing and revising existing plans based on feedback and site conditions. Additionally, you will utilize industry-standard CAD software to produce high-quality designs while maintaining a focus on safety and excellence in all aspects of your work. With innovation at the forefront, your creativity will play a key role in bringing projects to life. Would you be a great CAD Technician ? To thrive as a CAD Technician at BPG, you will need a blend of technical and interpersonal skills. Strong attention to detail is essential for creating precise drawings and ensuring the accuracy of design specifications. A foundational understanding of construction principles and engineering concepts will aid in effective collaboration with project managers and engineers. Excellent communication skills are critical, as you'll need to convey ideas clearly and work closely with various stakeholders. Problem-solving abilities will help you navigate project challenges and develop innovative solutions. Additionally, being adaptable and open to feedback is crucial, as project requirements may evolve. Time management skills will ensure you meet deadlines while maintaining high-quality work. A commitment to safety and a proactive approach to learning will further enhance your success within the dynamic environment at BPG Designs. Are you ready for an exciting opportunity? So, what do you think? If this sounds like the right position for you, go ahead and apply. Good luck! Job Posted by ApplicantPro

Job Description CIVIL CAD DESIGNER - Land Development Our Arizona Land development team is growing! JOIN DIBBLE AND SHAPE YOUR FUTURE! We are seeking a highly motivated Civil CAD Designer to join our Mesa, AZ office. Our employees enjoy our industry-leading benefits program, ability to balance their work life and home life, opportunities for development and growth, company events & activities, and the various opportunities to give back with our community activities. The successful candidate will have the ability to participate in complex and high value projects, work with multiple projects simultaneously without sacrificing quality of effectiveness, make sound decisions for the benefit of the project and the Company. ACCOUNTABILITIES: • Perform engineering design using AutoCAD Civil3D, • Communicate design approaches and decisions with associated supporting documentation to Project Engineers and Project Managers, • Prepare development plans including site, utility and grading & drainage construction documents, • Tabulate and address review comments on deliverables provided by Client, Project Engineers or Project Managers, • Provide quality reviews of own work in accordance with Company's quality control program and processes, • Preparation of engineering drawings from sketches, field books, verbal description, and specifications, • Coordination of CAD files and design with internal and external team members Minimum Qualifications: • Prior AutoCAD and Civil 3D experience, • Relevant/similar Land Development Experience, specifically commercial/site development, • Excellent oral and written communication skill, • Ability to work independently and self-motivated, • Ability to prepare construction documents using good design judgement and meeting agency design guidelines, • Ability to work in a fast paced and ever-changing environment on multiple projects simultaneously and must be a team player, • Associate's degree in drafting or similar education preferred, • A minimum of 1-3 years of experience as a CAD Drafter required LOCATION: This opportunity is in our Mesa, AZ office location COMPENSATION: Compensation is based on the successful candidate's individual education, qualifications, and experience. ABOUT DIBBLE Founded in 1962, we provide a full range of multi-disciplinary services to public and private sector clients across Arizona, Colorado, and the Southwestern United States. Our broad market expertise offers the ability to deliver complete engineering, planning, and surveying solutions from concept to closeout. Our business is built on honesty, ethics, accountability, quality, and service and our sense of purpose drives our commitment to serve our employees, clients, partners, and communities. Every day, our team of professionals collaborate, develop, and produce great results. They are the reason we get things done so we know how essential they are. For our amazing team, we offer great benefits as well as ensure a positive and uplifting company culture in which our employees can continue to learn, grow, and perform to their highest potential. READY TO JOIN OUR TEAM? If you feel that you would be right for this opportunity, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Dibble is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Job Posted by ApplicantPro

Job Description Elevate Your Career in the Heart of the Valley of the Sun Gilbert, Arizona where desert sunsets paint the sky in brilliant hues and innovation meets southwestern charm. Here, in one of America's fastest growing metropolitan areas, an exceptional opportunity awaits a talented dentist ready to make their mark. Your Next Chapter Begins Here We're seeking an accomplished dentist with at least 2 years of clinical experience or GPR/AEGD completion to join our thriving Phoenix practice. This isn't just another position it's your chance to practice cutting-edge dentistry in a city that perfectly balances year-round sunshine, cultural vibrancy, and endless outdoor adventure. Where Artistry Meets Precision In our state-of-the-art practice, you'll deliver the full spectrum of dental care with confidence and creativity: Diagnose and treat complex dental conditions with precision. Perform advanced restorative procedures, endodontics, extractions, and implant dentistry. Design and craft custom prosthetics – bridges, crowns, and dentures that transform smiles. Execute surgical procedures on tissues and bone with expertise. Empower patients through education, preventive care, and personalized treatment planning. Provide compassionate sedation and anesthesia management. Guide patients through their healing journey with thoughtful medication management and aftercare. Working seamlessly alongside our talented hygienists and dental assistants, you’ll be part of a team that believes exceptional dentistry is a collaborative art. What Sets You Apart You bring more than credentials you bring passion: • Active Arizona DDS or DMD license Minimum 2 years of clinical experience or GPR/AEGD program completion, • Advanced proficiency with modern dental technology and digital workflows Proven expertise in extractions, endodontics, surgical procedures, and restorative dentistry, • Exceptional chairside manner and communication skills that put patients at ease, • Meticulous attention to detail paired with grace under pressure Why Phoenix? Imagine finishing your day and hiking Camelback Mountain as the sunsets over the Sonoran Desert. Picture weekend escapes to Sedona's red rocks or Scottsdale’s world class dining and arts scene. With 300 days of sunshine annually, championship golf courses, professional sports, and a booming culinary landscape, Phoenix offers an unparalleled quality of life. Why Our Practice Stands Apart We've created something special a practice where technology empowers artistry and teamwork elevates outcomes: Cutting Edge Technology: CBCT imaging, CAD/CAM design software, in-house 3D printing, and milling machines at your fingertips Comprehensive Care Model: From routine cleanings to complex implant cases were a true full-service destination 5 Star Experience: Every patient, every visit, every time it’s our standard Investment in Excellence: Generous continuing education reimbursement to fuel your professional growth Collaborative Culture: A supportive team environment where your expertise is valued and your success is celebrated Competitive Rewards: Exceptional compensation and benefits package that reflects your worth Your Future Awaits This is more than a career move it’s an invitation to practice dentistry at the highest level while enjoying everything Phoenix has to offer. Here, your clinical excellence will shine under the Arizona sun, your skills will flourish with cutting edge technology, and your passion for transforming lives will find its perfect home. Ready to discover why Phoenix is where exceptional dentists thrive? Let’s create something extraordinary together brighter smiles, better outcomes, and a career that inspires you every single day.

Job DescriptionJob Title: Mechanical DesignerJob Description We are seeking a talented Mechanical Designer to support the Sentinel program. This role involves using Siemens NX and modeling software along with Teamcenter, with a focus on maintaining and applying GD&T standards. The Sentinel program is paperless, emphasizing the importance of PMI (Product Manufacturing Information) experience, which consolidates all written assembly instructions, dimensions, and data sheets into the drawings. Responsibilities • Develop and revise layout, detail, and assembly drawings of moderate complexity for mechanical and/or electro-mechanical components using CAD and PLM software with minimal supervision., • Design simple mechanical and/or electromechanical components as required., • Gather missing information necessary to complete assignments and ensure accuracy., • Perform work in accordance with standard drafting practices, maintaining a solid understanding of Geometric Dimensioning and Tolerancing methods., • Hand off work to and supervise lower-level drafters as needed., • Adhere to established policies and standards while using CAD and PLM software efficiently.Essential Skills, • Proficiency with Siemens NX and Teamcenter, with at least 2 years of recent experience., • Daily use of Geometric Dimensioning and Tolerancing (GD&T)., • 5-10 years of experience in military, DOD, or aerospace mechanical design., • U.S. Citizenship with the ability to obtain a secret security clearance.Additional Skills & Qualifications, • 1 year of PMI Product Manufacturing Information experience in NX. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in CHANDLER,AZ. Application Deadline This position is anticipated to close on Mar 10, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Full Arch Hybrid Exocad Designer Position Title: Full Arch Hybrid Exocad Designer Employment Type: Full-time Location: Arizona Industry: Dental Laboratory / Digital Dentistry Position Summary The Full Arch Hybrid Exocad Designer is responsible for the digital design of full arch, implant-supported prosthetics—specifically hybrid dentures—using Exocad CAD/CAM software. This role focuses on the All-on-4 treatment concept and requires close collaboration with dentists, dental assistants, and other lab technicians to ensure each restoration meets the highest standards of fit, function, and aesthetics, Key Responsibilities • Design full arch implant-supported bridges and hybrid dentures using Exocad software, based on digital scans of patients’ teeth and gums (especially for All-on-4 cases)., • Fabricate hybrid prosthetics that meet clinical and aesthetic requirements., • Read and interpret dental prescriptions (RXs) and technical specifications accurately., • Collaborate with dental professionals and lab team members to ensure patient needs are met and cases are completed on time., • Perform quality control checks on all digital designs to ensure they meet lab and clinical standards., • Troubleshoot and resolve design or workflow issues as they arise., • Stay updated on advancements in CAD/CAM technology and digital dental workflows., • Proficiency in Exocad software; experience with 3Shape or similar CAD/CAM platforms is a plus., • Demonstrated expertise in designing full-arch, implant-supported, and hybrid dental restorations., • In-depth knowledge of dental anatomy, occlusion, morphology, and materials science., • Experience with digital workflows, 3D scanning, and dental lab processes., • Strong attention to detail and the ability to follow detailed instructions., • Excellent communication and teamwork skills; able to collaborate effectively with dentists and lab staff., • Strong problem-solving skills and the ability to work in a fast-paced, deadline-driven environment., • Good manual dexterity and eyesight; ability to sit or stand for extended periods., • Ability to manage multiple projects simultaneously while maintaining quality standards., • Previous experience in a dental laboratory setting, particularly with full-arch and All-on-4 cases., • This position may require in-person work at a dental laboratory facility., • Physical demands include sitting or standing for long periods and working with fine digital and manual tools., • The work environment is collaborative, innovative, and focused on delivering high-quality dental solutions to patients.

Job Description Quality Engineer Job Responsibilities: Design, develop and implement best quality practices and processes for product and process improvements. Maintain, monitor and ensure highest quality in services or products. Develop and initiate quality standards for tests, inspections and evaluations. Quality Engineer Job Duties: • Plans and directs activities concerned with development, application, and maintenance of quality standards for processes, materials and products., • Develops and initiates standards and methods for inspection, testing, and evaluation, utilizing knowledge in engineering fields such as manufacturing or mechanical engineering., • Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality data., • Develops and implements methods and procedures for disposition of discrepant material and devises methods to assess cost and responsibility., • Directs workers engaged in measuring and testing product and tabulating data concerning materials, product, or process., • Compiles and writes training material and conducts training sessions on quality control activities., • Specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology and automated testing., • Manage quality control program., • Design and develop forms and instructions for evaluating, assessing, reporting and documenting on quality standards in products or services., • Troubleshoot and resolve problems relating to quality control aspects., • Lead, direct and assist technical, professional staff in measuring and testing a product or services., • Compile and document data relating to products, processes, materials and quality. Dealing with Complexity, In-depth knowledge of electronic manufacturing, Knowledgeable of SMT assembly processes and equipment, Leadership, Ability to interact with customers, Supervision, Manufacturing Methods and Procedures, Manufacturing Quality, Six Sigma and Lean manufacturing, Presenting Technical Information, CAD, CAD/CAM Education: Bachelor's of Science in engineering discipline and 5 years applicable field experience Company DescriptionAPCT, ACI, and San Diego PCB Design have rebranded to AdvancedPCB. Though our name has changed, our commitment to our customers will not. With this latest acquisition, AdvancedPCB will evolve into the most comprehensive provider of PCBs in the country. As the result of a fusion of capabilities and opportunities, we will offer a competitive product for applications both large and small, and every interaction will be infused with our core belief that customer centricity is key. The PCB and Chip industries are vitally important to the United States. A large percentage of semiconductor production happens offshore, which challenges our strategic capabilities as a nation. It’s imperative that the industry shift power and production back onshore, but smaller organizations have been struggling to keep up with technology – and cost – which ultimately led to the consolidation of numerous organizations. With over 40 years of industry experience, AdvancedPCB is poised to lead the industry with a high-level focus on customer centricity and the unique ability to meet the demands of any PCB need, be it simple or highly complex. However, the need for greater domestic manufacturing and associated investment in this sector is a problem we all share and must band together to address. This rebrand will provide a window of opportunity for us to broaden the conversation and awareness of the important place we hold across industries and is a chance for us to work together to boldly redefine technology and drive our nation - and the global community - towards a brighter, more sustainable and interconnected world. Today, more than 40 years after its founding, AdvancedPCB is the nation’s leader in printed circuit board solutions, offering full-scale design, fabrication, and assembly in-house consistently faster than the industry standard. We take pride in offering full-service solutions that meet the unique demands of any PCB customer need, while providing best-in-class customer service at every touchpoint.APCT, ACI, and San Diego PCB Design have rebranded to AdvancedPCB. Though our name has changed, our commitment to our customers will not. With this latest acquisition, AdvancedPCB will evolve into the most comprehensive provider of PCBs in the country. As the result of a fusion of capabilities and opportunities, we will offer a competitive product for applications both large and small, and every interaction will be infused with our core belief that customer centricity is key.\r\n\r\nThe PCB and Chip industries are vitally important to the United States. A large percentage of semiconductor production happens offshore, which challenges our strategic capabilities as a nation. It’s imperative that the industry shift power and production back onshore, but smaller organizations have been struggling to keep up with technology – and cost – which ultimately led to the consolidation of numerous organizations.\r\n\r\nWith over 40 years of industry experience, AdvancedPCB is poised to lead the industry with a high-level focus on customer centricity and the unique ability to meet the demands of any PCB need, be it simple or highly complex. However, the need for greater domestic manufacturing and associated investment in this sector is a problem we all share and must band together to address. This rebrand will provide a window of opportunity for us to broaden the conversation and awareness of the important place we hold across industries and is a chance for us to work together to boldly redefine technology and drive our nation - and the global community - towards a brighter, more sustainable and interconnected world.\r\n\r\nToday, more than 40 years after its founding, AdvancedPCB is the nation’s leader in printed circuit board solutions, offering full-scale design, fabrication, and assembly in-house consistently faster than the industry standard. We take pride in offering full-service solutions that meet the unique demands of any PCB customer need, while providing best-in-class customer service at every touchpoint.

Job Description Company Description Lonestar Racing is an industry leading off-road aftermarket manufacturing company specializing in aftermarket ATV and UTV products from small billet components to fully race legal race UTV's. We manufacture all our products in house in our machine and fabrication manufacturing facility, here in Mesa, Arizona. Role Description This is a full-time on-site role for a design/manufacturing engineer located in Mesa, Arizona. This role and scope of responsibilities are flexible based on the candidates experience. The design/manufacturing engineer will be responsible for designing new aftermarket ATV and UTV products for Lonestar Racing. They will be responsible for managing the product life cycle from the initial research and development to a full production ready component. This includes R&D, design, fixture design and manufacturing process development. The candidate must be able to adapt and improve new and existing designs based on product feedback and prototyping outcomes, while ensuring compatibility with machine and equipment capabilities and constraints. The role requires high proficiency in CAD (Solidworks Preferred). The ideal candidate will be able to manage the design and development of new products while simultaneously exploring and developing new manufacturing processes for new and existing products to support the production team in easier, faster, and more profitable manufacturing of Lonestar Racing products. Key Responsibilities · Design of high-quality aftermarket ATV and UTV components · Managing product development up to and including initial production · Collaborate with multiple teams and departments on manufacturing process development · New product documentation including but not limited to part numbers, CAD drawings, fabrication process notes, machine shop process notes · New product fixture development, work holding, tooling acquisitions · Managing multiple projects at once while adhering to deadlines · Reverse engineering OEM ATV and UTV products using 3D scanning technology · Utilize Software including Solidworks, Mastercam, CreaformOS 2, Bambu Studio · Manufacturing Cost Reduction Required Qualifications · High Proficiency in CAD modeling (Solidworks Preferred) · Experience with low volume production manufacturing process development · Basic understanding of metal fabrication and CNC machining · Strong understanding of mechanical design principles · Attention to detail and problem-solving skills · Mechanically inclined Preferred Qualifications · Experience using engineering software such as Mastercam, CreaformOS 2, Bambu Studio · Experience with manual machining (lathe and mill) techniques is a plus · Experience in metallurgy or material science is a plus · Basic knowledge of ASME Standards and where to look them up · Off-road Enthusiast Additional Details · 4/10 Schedule - Monday-Thursday 6:00am-4:45pm · Pay: $50,000 - $100,000 per year o Role and Compensation based on experience · Health insurance · Dental insurance · Life insurance · Vision insurance · Paid time off

Job DescriptionJob Description Be part of a team that applies its expertise and knowledge to technical projects, finding innovative, cost-effective means to improve products, techniques, procedures, and technologies. You will design and develop new ideas and solutions for new product development as well as current products modification and improvements based on in-service issues and market strategy. You are responsible for design and implementation of mechanical parts, subassemblies and product improvements. KEY RESPONSIBILITIES • Support the design, implementation, commissioning, and maintenance of energy production, management and infrastructure automation systems., • Execute energy-related projects, ensuring systems operate efficiently, safely, and deliver results for our customers, • Commission, test, troubleshoot, and optimize energy and control systems to improve efficiency and reliability., • Collaborate as a technical focal for field technicians, engineers, and project to deliver projects on schedule and within scope., • Diagnose system issues, perform root-cause analysis, and implement corrective actions., • Ability to work flexible shifts to support operational requirements Qualifications YOU MUST HAVE • Bachelors Degree in Mechanical, Aerospace or Electrical Engineering, • Minimum of 2 years of experience with PLCs and industrial controls, • Minimum of 2 years of experience with process piping and controls including distribution of flammable fluids, • Minimum of 3 year of experience with Familiarity with industrial mechanical systems such as cooling towers, compressors, dryers, refrigeration systems, heaters WE VALUE, • Three plus years design experience, specifically with CAD, preferably NX or Catia or AutoCAD, • Industrial and user experience design talent, • Ability to work independently, • Willingness to learn new technologies, • An open, honest and team oriented personality, • Eagerness to get involved in hands-on work, • Ability to work flexible shifts, • Creativity, • Some experience developing products or sustaining existing products In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more Honeywell Benefits information visit: The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: 1/15/2026 US PERSONS CONSIDERATIONS: Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status or have the ability to obtain an export authorization. About Us Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable.

Job DescriptionTitleProject Engineer EOE StatementWe are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Description CAGE is a highly respected leader in civil engineering, surveying, and construction management services, known for our expertise in land development consulting. Our team of professionals is dedicated to delivering innovative and high-quality solutions tailored to our clients' unique needs. Committed to excellence and integrity, CAGE offers a collaborative and supportive work environment where employees can thrive and grow. Join us and become part of a company that values expertise, fosters professional development, and drives impactful projects that shape communities for the better. Position Overview: As a Project Engineer at CAGE, you will be tasked with the preparation, scheduling, and coordination of design documents and calculations for various site development tasks. These include site planning, stormwater management calculations, preliminary and final construction documents, stormwater pollution prevention plans, completion of permit documents, and other relevant reports. You'll work under the guidance and supervision of the project manager to ensure smooth execution of all activities. Typically Reports To: Project Manager Typical Years of Experience: 3+ Key Responsibilities: • Manage site planning, stormwater management calculations, utility design, preliminary and final construction documents, stormwater pollution prevention plans, completion of permit documents, and other reports with the direction and guidance of the project manager., • Manage project communication with clients and build trust and relationships with clients through consistent delivery of quality products and service., • Utilizes time management and organizational skills to excel at project tasks., • Prioritize projects tasks for multiple ongoing projects., • Attend client/municipal meetings with the project manager to review project issues and pursue project approval, including technical meetings and public hearings with the direction and guidance of the project manager., • Attend project meetings with the direction and guidance of the project manager., • Coordinates with project subconsultants to obtain the necessary information for project design., • Continuously meets all deadlines or informs the project manager well in advance if a deadline cannot be met due to extenuating circumstances., • Assist the project team in preparing the project schedule and include all necessary tasks to define the critical path., • BS in Engineering from an accredited university., • 3+ years of experience., • EIT credentials (passing of the FE exam) preferred, but not required., • Proficient with CAD Civil 3D software., • Possess a firm understanding of engineering design for all aspects of site development such as site grading design, utility design, and storm management design., • Focused, motivated, and results oriented., • Embraces teamwork approach and possesses strong communication skills., • Must demonstrate a firm understanding of project flow and necessary project tasks. Professional Growth • Tuition reimbursement & on-demand training, • Clear career paths & promotion opportunities, • Book club, happy hours & social events, • Inclusive, collaborative environment, • Compensation: $80,000-$95,000, • The salary range provided is a general guideline. Final compensation will be based on factors such as experience, qualifications, skills, and overall alignment with the role and company needs., • Medical, dental & vision plans (HSA options), • Mental health resources & EAP access, • Hybrid work options, • Flexible time off - no accruals, • 7 paid holidays + 1 floating holiday, • Paid parental leave (4 weeks), • 401(k) with an up to 4% match, fully vested day one, • Life & disability insurance At CAGE, we excel as problem solvers, prioritize cost-conscious design, and deliver exceptional value to our clients. Crucially, we foster strong relationships built on trust and satisfaction. We seek individuals who share our enthusiasm, passion, and dedication to hard work which have propelled us to our current success. Are you ready to make a difference at CAGE? If so, we look forward to meeting you. CAGE Civil Engineering is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Join our team and contribute to the innovative solutions that drive our success. CAGE does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies without pre-approval from the CAGE team. Pre-approval is required before any external candidate can be submitted. CAGE will not be responsible for fees related to unsolicited resumes and for candidates who are sent directly to hiring managers. LocationAZ - CHANDLER Full-Time/Part-TimeFull-Time About the OrganizationCAGE is a highly respected leader in civil engineering, surveying, and construction management services, known for our expertise in land development consulting. Our team of professionals is dedicated to delivering innovative and high-quality solutions tailored to our clients' unique needs. Committed to excellence and integrity, CAGE offers a collaborative and supportive work environment where employees can thrive and grow. Join us and become part of a company that values expertise, fosters professional development, and drives impactful projects that shape communities for the better. Powered by JazzHR yF3i2iAGpH

Job Description You will craft, test, certify, and build high assurance encryption products aligned with NSA TEMPEST requirements within Secure Network Systems (SNS). Use your TEMPEST design expertise for new HAIPE, EDE, Space, and Tactical high assurance encryptors, as well as execute production TEMPEST sampling program and address any test failures to root cause. Responsibilities: • Collaborate with analog and digital hardware design engineers and mechanical engineers to create TEMPEST compliant products, • Recommend circuits, participate in design reviews, conduct tests on new TEMPEST solutions, • Review Schematic/CAD designs, • Develop TEMPEST Test plans, procedures, and reports, • Participate in the initial Certification and Submittal phase of the new TEMPEST facility and oversee certification under the TEMPEST Manufacturing and Test Services Program, • Perform testing in accordance with NSTISSAM TEMPEST/1-92, CNSSAM TEMPEST 01-02, • Collaborate with in-house and contract test technicians to conduct experimental (engineering) and formal (for score) TEMPEST tests, • Execute the production sampling TEMPEST program, • Collaborate with NSA to achieve successful TEMPEST test results and product certification, • Support the EMI/EMC qualification of products Qualifications: • Experience with hardware design for TEMPEST secure products, • TEMPEST experience post CTP certification, • Proven experience with NSTISSAM TEMPEST/1-92 and CNSSAM TEMPEST/01-02 specifications, • Demonstrated experience with MIL-STD-461/464 and/or DO-160 EMI/EMC standards, a plus, • Validated understanding with TEMPEST test equipment such as TEMPEST receivers, oscilloscopes, dynamic signal analyzers and signal generators, • Foundational knowledge of analog and digital logic and timing considerations, • Solid written and verbal communication skills, ability to work with a temporally and geographically diverse team, • Familiarity with production related processes and common failure modes, • Able to be a part of a multidisciplinary team to evaluate and troubleshoot production related issues, • Bachelor’s degree in Engineering, Computer Sciences or relevant technical field, • Certification of a Level I CTP (Certified Tempest Professional), • US Government position. US Citizenship required, • Active DoD Secret Clearance with ability to obtain Top Secret when administratively feasible, • Ability to travel up to 15%, • Relocation Package is also available

Job Description Summary We are seeking an experienced Senior Instrumentation and Controls (I&C) Engineer with a Professional Engineer (PE) license to join our growing multidisciplinary Architectural & Engineering team. This role will focus heavily on semiconductor facility projects and requires deep technical expertise, strong coordination skills, and the ability to deliver high-quality engineering packages within a fast-paced project environment. The ideal candidate is proactive, detail-oriented, and comfortable working collaboratively with electrical, mechanical, process, and structural teams to support highly complex facility systems. Key Responsibilities Instrumentation & Controls Design • Develop complete I&C design packages, including P&IDs, control narratives, loop diagrams, wiring diagrams, instrument indices, panel layouts, and I/O lists., • Select, size, and specify instrumentation for systems such as ultrapure water, specialty gases, chemical distribution, HVAC, and process utilities., • Create sequences of operation (SOO) and develop detailed control logic aligned with client requirements., • Design and integrate control system architectures including PLC, DCS, SCADA, BMS, and EMS platforms., • Collaborate with multiple engineering disciplines to ensure complete and coordinated system designs., • Participate in design reviews, model coordination meetings, and constructability sessions., • Prepare and seal engineering drawings and documents using a valid PE license., • Assist with scope development, cost estimates, and proposal preparation for I&C project components., • Provide on-site support including installation verification, calibration oversight, loop checks, and functional testing., • Troubleshoot instrumentation and control system issues during construction and commissioning., • Ensure all designs comply with ISA, SEMI, NEC, NFPA, IEEE, and applicable local codes., • Attend client meetings and design presentations as needed., • Communicate technical information clearly to clients, project managers, and multi-discipline teams., • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Chemical Engineering, or related field., • Active Professional Engineer (PE) license (required)., • 5–10+ years of relevant engineering experience, preferably in semiconductor or advanced manufacturing environments., • Strong knowledge of instrumentation, controls, automation systems, and semiconductor facility processes., • Proficiency with I&C design tools, loop diagrams, P&IDs, instrument databases, and control system architecture., • Understanding of ISA standards, NEC, NFPA, and SEMI requirements., • Experience with tool install projects, process utilities, and advanced semiconductor facilities., • Experience working with PLC, DCS, SCADA, BMS, and EMS control platforms., • Familiarity with AutoCAD, Revit, and instrumentation design software. Industrial Design offers competitive pay and full benefits including Health/Dental/Vision insurance (single and family), PTO, Paid Holidays and 401k. Affirmative Action/EEO statement – Industrial Design recruits, hires, employs, trains, promotes, and compensates individuals based on job-related qualifications and abilities. Industrial Design is an equal opportunity employer and values diversity. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other status protected by law. Applicants please note: This position requires US work authorization, and we are not looking for out of country/outsourced support or remote workers of any kind. This opening is for local candidates residing in the metro phoenix area or those willing to self-relocate to this area only. All positions listed are full time in office roles with no opportunity for hybrid or work from home accommodations. If you are looking to work remote, please do not apply.

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin? Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity, and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! Your Next Opportunity We are seeking a Substation Protection & Control Design Engineer to join our world‑class engineering team. In this role, you'll work on new substation designs and apply your deep technical expertise to develop detailed protection and control drawings-including metering and relaying single lines, three‑line diagrams, AC/DC schematics, wiring diagrams, panel layouts, cable schedules, RTU diagrams, and SCADA interfaces. This is an opportunity to contribute to high‑impact utility and transmission projects while collaborating with some of the most talented engineers in the industry. What You'll Do * Apply knowledge of substation protection and control schemes-overcurrent, distance, differential, breaker failure, voltage/frequency, transformer, reclosing, communication‑based protection, synchronization, and more. * Develop protection and control one‑line diagrams and relaying panel bills of materials with minimal supervision. * Create and manage drawings including: * Metering and relaying single lines * AC/DC schematics * Wiring diagrams * Panel elevations and layouts * Cable schedules * Point‑to‑point wiring * Panel fabrication details * RTU and communications wiring * Breaker and LTC control schematics * SCADA control/alarm interfaces * Trip circuit supervision * Scheme 1 / Scheme 2 separation * Support projects involving transmission line panel replacements, bus reconfigurations, and sectionalizing stations. * Work on retrofit projects, including the conversion of electromechanical relays to microprocessor‑based systems. * Perform CAD design and drafting using AutoCAD or MicroStation. * Review vendor equipment drawings, design specs, and control cabinet layouts. * Support development of protection and control panel bill of materials. * Apply knowledge of various transmission bus arrangements. What You'll Need to Be Successful * Experience with design development stages (30%, 60%, 90%, as‑builts) and associated deliverables. * Strong understanding of industry standards, symbols, and construction notes. * Experience reviewing manufacturer drawings (transformers, breakers, junction boxes, etc.). * Hands‑on expertise developing complete P&C drawing packages (single lines, three‑lines, schematics, wiring, RTU diagrams, communication diagrams). * Experience in retrofit and modernization projects, including relay upgrades. * Proficiency with AutoCAD or MicroStation. * Familiarity with transmission‑level substation configurations. What You Bring to Us * B.S. in Electrical Engineering or a related discipline. * 6+ years of experience in protection and control design for transmission, distribution, substation, or industrial power systems. Travel * Up to 25% Working Conditions * Primarily office-based with periods of sitting, walking, typing, bending, and carrying. * Occasional exposure to jobsite conditions and moderate noise levels. * ADA‑compliant environment with reasonable accommodations available. * Occasional lifting up to 30 lbs. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. You Matter - Our Benefits * Employee Stock Ownership Plan (ESOP) * 401(k) * Annual performance‑based bonuses * 17 PTO days + 10 paid holidays * Medical, dental, and vision insurance * Life, AD&D, and voluntary life insurance * Disability income protection * Health and Dependent Care FSA options * Charitable Giving Match through the Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job DescriptionJob Title: Mechanical DesignerJob Description We are seeking a talented Mechanical Designer to support the Sentinel program. This role involves using Siemens NX and modeling software along with Teamcenter, with a focus on maintaining and applying GD&T standards. The Sentinel program is paperless, emphasizing the importance of PMI (Product Manufacturing Information) experience, which consolidates all written assembly instructions, dimensions, and data sheets into the drawings. Responsibilities • Develop and revise layout, detail, and assembly drawings of moderate complexity for mechanical and/or electro-mechanical components using CAD and PLM software with minimal supervision., • Design simple mechanical and/or electromechanical components as required., • Gather missing information necessary to complete assignments and ensure accuracy., • Perform work in accordance with standard drafting practices, maintaining a solid understanding of Geometric Dimensioning and Tolerancing methods., • Hand off work to and supervise lower-level drafters as needed., • Adhere to established policies and standards while using CAD and PLM software efficiently.Essential Skills, • Proficiency with Siemens NX and Teamcenter, with at least 2 years of recent experience., • Daily use of Geometric Dimensioning and Tolerancing (GD&T)., • 5-10 years of experience in military, DOD, or aerospace mechanical design., • U.S. Citizenship with the ability to obtain a secret security clearance.Additional Skills & Qualifications, • 1 year of PMI Product Manufacturing Information experience in NX. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in CHANDLER,AZ. Application Deadline This position is anticipated to close on Mar 10, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.