Trabajos Engineering en Gilbert, AZCrear alertas

Crane Aerospace & Electronics is a leading supplier of mission-critical RF, microwave, and millimeter-wave components and subsystems for defense, aerospace, and space platforms. From deep-space satellite payloads to electronic warfare systems and secure communications, our Microwave Solutions division plays a vital role in powering innovation where performance matters most. We are seeking a hands-on Manufacturing Engineer III to join our dynamic team in Chandler, AZ. This is an opportunity to drive manufacturing excellence for highly complex RF and microwave products in a high-mix, low-volume environment supporting next-generation defense and space technologies. What You'll Do: • Lead cross-functional initiatives focused on manufacturing process optimization, cost reduction, and product improvement across our advanced RF/microwave product lines, • Analyze and design manufacturing methods, process flows, tooling, and layout to support efficient production of highly specialized hardware, • Support root cause analysis and corrective actions for yield, quality, and assembly issues in high-reliability microwave product manufacturing, • Participate in DFM reviews for new designs and design changes; provide technical feedback to improve manufacturability and throughput, • Drive improvements in manufacturability for RF/microwave integrated assemblies (IMAs), frequency control devices, up/down converters, filters, and synthesizers, • Develop and maintain detailed manufacturing instructions, routings, and procedures aligned with quality and regulatory requirements, • Mentor junior engineers and act as a technical leader in support of production and engineering teams, • Conduct cost analysis, ROI calculations, and make/buy decisions to support capital investments and business case evaluations, • Serve as a key contributor in cross-functional Material Review Board (MRB) and new product introduction (NPI) teams, • Interface with internal teams, external vendors, and customers to resolve technical manufacturing challenges and enable delivery What You'll Bring: • Bachelor's degree in Mechanical, Electrical, Manufacturing Engineering or related field, • 5+ years of experience in a manufacturing engineering role within a high-reliability electronics or RF/microwave production environment, • Knowledge of manufacturing methods for RF electronics, including soldering, mechanical assembly, bonding, and environmental testing, • Ability to analyze technical drawings, interpret customer specifications, and support high-mix product builds, • Strong working knowledge of Lean principles, root cause analysis, and continuous improvement tools (e.g., 5 Why, Fishbone, PFMEA), • Effective communicator with ability to collaborate across engineering, quality, supply chain, and operations teams, • Experience developing and tracking manufacturing KPIs, creating work instructions, and supporting regulated production (e.g., AS9100, MIL-STD) Preferred Qualifications: • Experience in a defense, aerospace, or regulated electronics manufacturing environment, • Prior work with RF/microwave systems or components a significant plus, • Proficiency in ERP/MRP systems, CAD tools, and process mapping platforms, • Exposure to CBS (Crane Business System) or similar continuous improvement frameworks Why Crane Microwave Solutions? • Join a team solving some of the toughest technical challenges in the defense and space industries, • Contribute to critical systems that keep people safe and connected across the globe-and beyond, • Thrive in a fast-paced, collaborative environment that values growth, ownership, and innovation Apply now to help us advance the next generation of RF and microwave technologies from concept to mission deployment. Top Benefits: As a team member at Crane Aerospace and Electronics, you'll enjoy: \n • \nBenefits: Health care, dental, vision, life and disability insurance starting the first day of the month\n, • \nTime Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.\n, • \n401k Retirement Plan: 401k plan with company match\n, • \nEducation Reimbursement: eligible after 90 days of employment\n\n You can see a list of our benefits at or visit our website at for more information on our company and great opportunities. We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value. In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool. This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Technology is the driving force behind our product. We’re looking for brilliant people to join our team. Apply now!

Job Description Senior RF Engineer Location: Chandler, AZ Job type and Duration: Permanent – Full-Time US Citizenship required Our client, a national Aerospace and Defense organization, is looking to hire an RF Engineer to join their dynamic Engineering team in Chandler, AZ. This position requires you to be onsite in Chandler five days a week. The RF Engineer specializes in complex technical matters and provides engineering services for RF/Microwave/ Millimeter communications hardware systems for defense application including responsibility for technical proposals, prototype to production, performance, customer presentations, schedule, and cost requirements. Will have expert knowledge of concepts, practices and procedures of assigned product or program. May lead a team of engineers on assigned projects. Essential Functions: • End to End Systems analysis, model and simulate circuit or system performance using analytical tools, Cascade analysis of up/down converters., • Detailed analysis and design of RF (from VHF through millimeter-wave) and mixed-signal communications hardware components, including digital receiver subsystems and exciters (front ends, IF sections, phase-lock loops, AGC loops, synthesizers, A/D and D/A conversion)., • Filter modeling, analysis and design., • System integration, test and development of RF/millimeter-wave communications hardware for spaceflight., • Investigate; evaluate new communications technologies for spaceflight applications., • Work with interdisciplinary teams to ensure that the designs meet the customers electrical, environmental as well as internal manufacturing requirements and standards., • Mentor junior engineers and others in the area of expertise., • Support internal concurrent design criteria., • Functional as technical interface for customers and attend technical meetings as required, and specification development with customer., • Translate customer specification; generate design documentation required for prototype and/or production releases as needed., • Document new designs per established guidelines including but not limited to simulations, test circuit measurements and tolerance analysis., • Provide appropriate input to the development of test procedures, fixtures and software., • Experience : 10+ years of experience in microwave/millimeter-wave design theory component design; Experience with high reliability hardware from conceptual design through flight delivery; Experience with microwave modeling tools (I.e., Gensys, ADS, AWR, Ansoft HFSS, Ansoft Designer, Ansoft Maxwell, Matlab and AutoCAD or equivalent software., • Knowledge : Knowledge of complex communication systems theory; Systems architecture, RF architecture, RF/Microwave circuit design; Detailed knowledge of RF and mixed-signal design techniques and technologies, including receivers, synthesizers, and transmitters; Millimeter wave Radio systems design; synthesizer design, mixers, amplifiers, PLLs, low phase noise VCOs, filters, etc., from DC > 40Ghz; Magnetic circuit analysis experience desired., • Education/Certification : BS degree in Electrical Engineering. Masters or PhD degree preferred.Company DescriptionESPO Engineering, established in 1965, is a premier Technical Recruiting and Staffing firm. ESPO employees may enjoy a full range of benefits from 401(k), Premium Health Insurance, Dental, Disability, Direct Deposit, PTO time and Holiday Pay. Apply now and see why so many professionals choose ESPO to help advance their careers. View jobs: Engineering, established in 1965, is a premier Technical Recruiting and Staffing firm. \r\n\r\nESPO employees may enjoy a full range of benefits from 401(k), Premium Health Insurance, Dental, Disability, Direct Deposit, PTO time and Holiday Pay. Apply now and see why so many professionals choose ESPO to help advance their careers. \r\nView jobs:

Job Description We're looking for a motivated Architect to join our design team at Minimal Living Concepts. As the Lead Architect, you'll lead our design team to craft our projects from the ground up. You will play a major part in dictating the design ethos of our brand and product line. We are expanding our product offering to include full size homes while also revamping our current ADU designs. This is role is a huge opportunity for the architect looking to lead a team and to spearhead the design vertical of our organization. In addition to creating all architectural documentation for your projects, you'll coordinate with our trusted engineering teams and third-party consultants to direct the design development of the entire project and facilitate planning and permitting processes. This critical role will draft and design to ensure that our construction projects are executed efficiently and accurately, meeting all regulatory standards and requirements. You will be working directly with the company's owners to further craft our line of full size homes and enter into a role with excellent growth potential. Description: Manage architecture, drafting, planning, and permitting processes from project initiation through to approved permits. This role will head up drafting and lead the planning process to create complete permit submittal packages for each company project, while working with team members to coordinate deadlines and deliverables based on the project requirements. Key Responsibilities: * Drafting & Design: • Create detailed architectural drawings, blueprints, and plans based on initial designs and sketches., • Expand our product offering and tailor the design ethos of our home/adu designs., • Develop floor plans, elevations, sections, and construction details using CAD software., • Revise and update existing drawings as needed, incorporating feedback from architects and engineers. Collaboration: • Work closely with architects, engineers, and other team members to ensure drawings meet project specifications., • Coordinate with project managers to understand project timelines and ensure drawings are completed on schedule., • Communicate with contractors and construction teams to clarify design details and resolve issues during the construction phase. Compliance & Standards: • Ensure all drawings comply with relevant building codes, regulations, and company standards., • Assist in the preparation of documents for permits, approvals, and construction., • Maintain an organized archive of drawings and related documents. Technical Skills: • Utilize AutoCAD (or Revit), and other relevant software to produce high-quality architectural drawings., • Incorporate material specifications, finishes, and other detailed information into drawings. Education: • Associate's or Bachelor's degree in Architectural Drafting, Architecture, or a related field., • Certification in CAD or related software is preferred. Experience: • 2+ years of experience in architectural drafting, preferably within the construction or architectural industry., • Experience with residential projects is a plus. Skills: • Proficiency in AutoCAD (or Revit), and other architectural drafting software., • Strong attention to detail and accuracy in producing technical drawings., • Excellent communication and teamwork skills., • Ability to manage multiple projects and meet deadlines., • Understanding of building codes, zoning laws, and construction processes.Company DescriptionMinimal Living Concepts is a premier custom home builder in Arizona, known for our innovative and high-quality pre-designed products. As we expand into full-sized homes and grow our spec home operation, we're seeking to build an incredible team to support our growing operations and ensure the smooth execution of our projects. Our mission is simple. Creating the world’s most seamless path to buying designer homes, online. Currently, our focus is on providing a complete turn-key service for the planning, permitting, and construction of our designer homes in Arizona and we are quickly expanding our portfolio of speculative home builds. We handle every element of our projects in-house, including acquisitions, architecture, design, permitting, planning, construction, and sales. View our products and company information at Living Concepts is a premier custom home builder in Arizona, known for our innovative and high-quality pre-designed products. As we expand into full-sized homes and grow our spec home operation, we're seeking to build an incredible team to support our growing operations and ensure the smooth execution of our projects.\r\n\r\nOur mission is simple. Creating the world’s most seamless path to buying designer homes, online. Currently, our focus is on providing a complete turn-key service for the planning, permitting, and construction of our designer homes in Arizona and we are quickly expanding our portfolio of speculative home builds. We handle every element of our projects in-house, including acquisitions, architecture, design, permitting, planning, construction, and sales.\r\n\r\nView our products and company information at

Job Description SV Microwave has an exciting opportunity for a driven, hardworking Manufacturing Engineer. This is a great opportunity for an individual with a strong desire to develop with a leading manufacturer. As a Manufacturing Engineer at SV Microwave, you will • Support the manufacturing floor in a technical capacity to ensure production meets quality and time standards, • Design tooling and processes for new product, • Improve existing methods and processes for cost reduction, decreased cycle and set-up times, and quality, • Initiate improvements based on yield, production time, rework, and other production metrics., • Troubleshoot root cause design and component failures and field returns using both experimental and analytical methods. Recommend & implement corrective actions., • Bachelors’ degree in manufacturing or mechanical engineering, • Excellent analytical and IT skills, • A meritocracy where a high level of achievement and contribution is rewarded, • Competitive compensation & incentives, • Training and career development, • A start-up atmosphere within a large, established organization, • 401k with a company match plus an additional employer paid contribution, • Healthcare including medical, dental and vision, life and disability, • 15 Days of Paid Time Off & 12 Paid Holidays, • Tuition reimbursement opportunities and education loan repayment assistance This position requires access to controlled technology that is subject to US export controls. Qualified candidates must be a US Person (including US Citizen, lawful permanent resident, or protected individual as defined by 8 U.S.C. 1324b(a)(3) or eligible to obtain required authorizations(s) from the U.S. Government. Powered by JazzHR YwDV912iyi

Job Description Position Description The Office Engineer (OE) position supports the execution of work in the field with a focus on project administration activities. The OE participates in many of the field activities, especially as related to safety and quality control. The Office Engineer works with the Project Engineer and responsibilities include exercising judgment and discretion in making recommendations, implementing policies and procedures, and handling a wide variety of matters in the office such as trade partner/supplier management to administer contract changes (e.g., RFIs and change orders), management of financial accounts, scheduling of deliveries, reporting on production trends, and other administrative aspects of the project. Position Qualifications * A 4-year degree in Civil, Structural, Architecture, or Construction Management * Valid Driver’s License * Strong communication skills * Computer software proficiency: Microsoft Office Suite (especially Excel-based templates), ProjectSight, Primavera, and AutoDesk Suite Preferred Qualifications * Past internships in the construction industry are preferred, but not required Essential Duties * Support the field through materials management to maintain the project schedule and sequencing * Supervise trade partner employees involved in the submittal and shop drawing process * Perform detailed reviews and provide approvals of submittals, shop drawings, and product data * Create and process RFIs in a solutions-oriented manner * Process subcontract bonds, insurance, pay applications, correspondence, change estimates, and potential change orders * Assist with data gathering for the monthly owner pay application and margin analysis * Participate in jobsite safety meetings, weekly safety audits, etc. * Facilitate the quality control plan and participate in preparatory meetings, initial inspections, follow-up inspections, etc. * Support BIM and VDC coordination meetings in the creation of RFIs, as needed, and review shop drawings from the coordinated model

Job DescriptionSalary: SyberJet Aircraft is a leading innovator in the development of advanced light jets, focused on delivering cutting-edge aviation solutions with a commitment to quality, performance, and safety. We are looking for a highly skilled and experienced Senior Electrical Engineer to join our growing team and contribute to the design, development, and integration of electrical systems for next-generation aircraft. Job Description: We are seeking a talented Senior Electrical Engineer with at least 10 years of experience in aerospace electrical engineering to lead the development of electrical systems for SyberJet Aircrafts cutting-edge aviation platforms. This individual will be responsible for the design, testing, integration, and support of electrical systems and components critical to the performance and safety of our aircraft. As a Senior Electrical Engineer at SyberJet, you will have the opportunity to work on highly innovative projects in a fast-paced and collaborative environment, where your expertise will play a key role in shaping the future of aviation. Key Responsibilities: • Electrical System Design: Lead the design and development of electrical power systems, avionics, wiring, and control systems for SyberJet Aircrafts advanced jet platforms, ensuring compliance with aerospace industry standards., • System Integration: Work closely with cross-functional teams to integrate electrical systems with mechanical and software subsystems, ensuring compatibility and optimal performance., • Component Selection: Select and validate electrical components, ensuring they meet the required performance, safety, and regulatory standards for aerospace applications., • Testing and Validation: Develop and execute comprehensive test plans, including environmental and system-level testing, to validate the electrical systems performance, reliability, and compliance with relevant standards., • Troubleshooting and Support: Provide technical support during both the design and production phases, troubleshooting complex electrical issues and implementing effective solutions., • Mentorship and Leadership: Mentor and guide junior engineers, providing technical leadership and fostering a culture of collaboration and innovation within the engineering team., • Documentation and Reporting: Prepare detailed technical documentation, including schematics, wiring diagrams, and system specifications, to support development, production, and regulatory approval processes, • Continuous Improvement: Stay informed about the latest technological advancements in electrical engineering and apply best practices to continuously improve SyberJets electrical systems and development processes. Qualifications • Education: Bachelors degree in Electrical Engineering, Aerospace Engineering, or a related discipline. A Masters degree or Professional Engineering license (PE) is preferred., • Experience: Minimum of 10 years of hands-on experience in electrical engineering within the aerospace industry, with a strong track record of successful design and development of electrical systems for aircraft or similar applications., • Technical Expertise: Deep understanding of aerospace electrical systems, including avionics, power distribution, control systems, and safety protocols., • Standards Knowledge: Extensive experience with aerospace industry standards and regulations (e.g., DO-160, MIL-STD-704, FAR Part 23/25)., • Software Proficiency: Proficiency with electrical design and simulation tools (e.g., MATLAB, Simulink, Altium, AutoCAD, Teamcenter, Jira, Confluence or similar) and electrical analysis software., • Problem-Solving Skills: Strong analytical and problem-solving skills, with the ability to address complex electrical issues and develop innovative solutions., • Communication: Excellent communication skills, with the ability to present technical information clearly to both technical and non-technical stakeholders. Preferred Qualifications: • Advanced Degree: Masters or Ph.D. in Electrical Engineering or Aerospace Engineering., • Specialized Experience: Experience with electrical systems for business jets, commercial aircraft, or military platforms., • Leadership Experience: Proven ability to lead engineering teams and manage cross-functional projects in a fast-paced, high-performance environment., • Certifications: Relevant certifications such as PMP (Project Management Professional) or IEEE membership are a plus. What We Offer • Innovative Work Environment: Be part of a dynamic team at the forefront of developing advanced aircraft technologies., • Impactful Projects: Contribute to the design and production of next-generation jet aircraft., • Competitive Compensation: Attractive salary and benefits package, including health, dental, vision, and retirement plans., • Collaborative Culture: Join a team of highly motivated professionals working together to push the boundaries of aerospace engineering.

Job Description Fisher Industries is a family of businesses that encompasses all aspects of the aggregate production and heavy civil construction industries. Our unique, vertically integrated business model allows us to handle small projects, large scale operations, and every tough job in between. Our goal is to provide reliable products and sustainable solutions for innovative global infrastructure. For additional information about our company, visit our website at POSITION SCOPE The Heavy Civil Project Engineer will be responsible for planning, developing, coordinating and managing onsite construction activities for heavy civil construction projects to ensure quality and cost. This position will be a travelling position where the qualified applicant will be required to integrate and travel with a project team or paving crew to assist with all the functions of the project. The individual must be able to multi-task and work in a fast-paced environment. Some night and weekend work will be required. Traveling is required for this position. This project is located in Kingman, AZ $1500 Sign-On Bonus! • Bonuses Payable following 90 days of employment PRIMARY DUTIES • Manage job controls to ensure compliance with contract, budget, schedule, forecasting and job costing, • Supervise, direct, and assist project staff to ensure individual development and that project standards are met, and work is completed on time and under budget, • Develop and maintain project schedule and daily costs to ensure work is completed on time and under budget, • Provide technical support in construction planning, quality control, application of construction methods, resolution and documentation of design conflicts, and constructability reviews to ensure successful job completion, • Represent company during client and project management meetings to ensure effective communication, • Develop and maintain all material and submittal logs, • Review, analysis, management, and resolution of field coordination issues within project team, • Interpret project plans, specifications, and details for subcontractors and craft people, • Bachelor's Degree in Civil Engineering, Construction Management or related field preferred, or equivalent combinations of technical training and related experience, • 7+ years of construction estimating support, engineering, field support, or similar experience, • Proficiency with Blue Beam and OST preferred but not required, • Proficiency with Heavy Job and HCSS preferred but not required, • Valid driver's license and acceptable MVR in accordance with Company Vehicle Program, • Ability to pass a pre-employment drug test, • Ability to complete work tasks under various adverse weather conditions including heat above 100 degrees, cold, and rain We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email or call the HR Department at (701) 456-9184 to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application. Job Posted by ApplicantPro

Job Description My client is seeking a Facilities Electrical Engineer. This role will act as the system owner and subject matter expert for a variety of Electrical Power systems supporting the Arizona facility. You will be responsible for safety, capacity, reliability, documentation and advanced troubleshooting of electrical power systems that may be up to 12.4kV as well as UPS and Emergency Generator systems. You will own developing documentation such as PM Job plans, operating procedures, troubleshooting specifications & training programs as well as engaging with our electricians and service providers in the field to ensure our power systems are safe and maintained.factory/site in Peoria, AZ. Essential Duties and Responsibilities: • Evaluate production equipment performance and efficiency., • Perform load calculations and select appropriate FEEDERS for system stability., • Conduct preventive maintenance on transformers, generators, UPS, and batteries., • Monitor key equipment in the central control room in real-time, including power consumption., • Develop system documentation (PM job plans, operating instructions, action plans, training) and lead root cause analysis (RCA) for electrical system failures., • Manage PA system operations, including installation, maintenance, and user training., • Ensure maintenance meets OEM and AHJ/Code requirements., • Coordinate with utility providers on load management and downtime., • Manages the Electrical Load Database to ensure distribution and source maintain redundancy and capacity for future expansion. Reviews ground fault, electrical coordination and Arc Flash Analysis and works to mitigate risk., • Develop and review plans, specifications, cost estimates, and safety plans., • Provide training and troubleshooting for electricians to ensure safe switching and subsequent work., • Ensure all requirements as specified by the manufacturer of equipment systems are met, and equipment operations, repairs, modifications, and maintenance meet environmental protection requirements., • Perform additional duties as needed, including ERT. Required Qualifications: • Bachelor's Degree in Electrical Engineering required. • A minimum of 3 years of relevant post education experience as an electrical engineer. • 3+ years of experience in maintenance with extensive knowledge of infrastructure design. • Previous knowledge in the operation of industrial and/or commercial processing equipment, semiconductor or Electric Utility experience is preferred. • Must have knowledge of industry standards, codes and regulations, and the ability to apply to maintenance operation of site Electrical Power systems. • Proficiency with electrical engineering principles, practices, process, design/build, and the application to permitting and project work-related issues. • Demonstrates competence and comprehensive knowledge concerning adjacent disciplines such as controls, water, gas and chemicals or mechanical. • Well-defined specific knowledge of relevant engineering and electrical construction laws, codes, regulations, compliance practices, and record-keeping requirements. • Demonstrated critical thinking and problem-solving skills required to apply technical knowledge to reach conclusions from testing results, data collation, computations, statistical analysis and arriving at the most effective, economical, and logical solution. • Demonstrated effectiveness at coordinating and assertively directing subcontractors. • Experience with Hook-Up & Lay-out - Matrix review of production equipment, preparation of bidding documents, on-site supervision, equipment turn-on, and handover. • For expansion construction, experience performing all tasks related to planning, design, construction, completion, and various permits. Physical Requirements: • Must have the ability to safely climb ladders, and work at elevation from ladders, scaffolding, lifts, roofs, or platforms, and the ability to work in confined spaces. Preferred Qualifications: • Previous experience in the semiconductor/advanced manufacturing industry preferred., • Experience managing cleanroom utility equipment, facility optimization, energy-saving planning, and utility operation preferred.

Job Description The Quality Engineer in Medical Plastic Injection Molding is responsible for overseeing and ensuring the quality of existing and new products and processes within the medical device manufacturing environment. This role involves implementing quality assurance practices, ensuring compliance with regulatory standards, conducting audits, and driving continuous improvement initiatives. Key Responsibilities: • Quality Assurance:, • Develop, implement, and maintain quality assurance policies and procedures to ensure product quality and compliance., • Create and maintain Quality Assurance documentation including Control Plans, pFMEAs, Quality Alerts, and Inspection Plans., • Conduct audits of raw materials, in-process products, and finished goods to verify adherence to quality standards., • Conduct Process Validations for new and revised products and processes ensuring long term capability., • Schedule Inspection resources to provide data supporting project work for on-time completion., • Regulatory Compliance:, • Ensure that all products and processes comply with relevant medical device regulations and standards, such as ISO 13485 and FDA requirements., • Prepare and manage documentation for regulatory submissions and audits., • Process Monitoring and Improvement:, • Monitor production processes to ensure consistent product quality., • Identify areas for process improvement and lead initiatives to enhance product quality and manufacturing efficiency., • Data Collection and Analysis:, • Collect and analyze data on product quality and process performance., • Prepare reports on quality metrics and trends to inform decision-making., • Problem Solving and Root Cause Analysis:, • Lead root cause analysis and corrective action activities for non-conforming products., • Collaborate with production, engineering, and R&D teams to implement effective corrective and preventive actions., • Supplier Quality Management:, • Evaluate supplier quality performance and conduct supplier audits and routine surveys., • Participate in review and approval of New Suppliers., • Provide routine review and maintenance of the Company Approved Supplier List (ASL)., • Work with suppliers to resolve quality issues, including issuance and followup on Corrective Actions, to ensure the supply of high-quality materials., • Customer Interaction:, • Address customer complaints and quality concerns including processing of Return Material Authorization, RMA, and formal Corrective Actions., • Support customer audits and visits by providing necessary documentation and information., • Support and provide routine status updates to Customers regarding open actions including, but not limited to, Corrective Actions, Projects and/or other Status Updates., • Active participant in Drawing Reviews to ensure that Quality Requirements can be satisfied., • Support Quality requirements for New Product Introduction working closely with Program Managers to support critical timelines for completion., • Continuous Improvement:, • Drive continuous improvement initiatives aimed at enhancing product quality, reducing waste, and improving efficiency. Provide review of any changes for impact on QMS., • Participate in and lead cross-functional quality improvement teams., • Training and Development:, • Mentor and train quality control personnel and junior quality engineers., • Conduct quality-related training programs for manufacturing and other relevant staff., • Auditing and Compliance:, • Conduct internal audits to ensure compliance with quality management systems and regulatory requirements., • Education: Bachelor's degree in Engineering, preferably in Mechanical, Industrial, or Plastics Engineering., • Experience: Minimum of 3-5 years of experience in a quality role within the medical device manufacturing industry, with significant experience in plastic injection molding., • Knowledge:, • In-depth understanding of quality assurance principles and methodologies., • Extensive knowledge of injection molding processes and equipment., • Familiarity with medical device regulations and standards, including ISO 13485 and FDA requirements., • Skills:, • Strong analytical and problem-solving skills., • Excellent attention to detail and organizational skills., • Proficiency in statistical analysis and quality management software., • Effective communication and leadership skills., • Ability to stand or walk for extended periods., • Occasionally lift and move objects up to 25 pounds., • Manufacturing floor and office environment., • May require occasional travel to supplier or customer sites., • Must be able to work flexible hours, including weekends or evenings, as needed.

Job Description Fisher Industries is a family of businesses that encompasses all aspects of the aggregate production and heavy civil construction industries. Our unique, vertically integrated business model allows us to handle small projects, large scale operations, and every tough job in between. Our goal is to provide reliable products and sustainable solutions for innovative global infrastructure. For additional information about our company, visit our website at . POSITION SCOPE The Project Engineer will be responsible for planning, developing, coordinating and managing onsite construction activities for heavy civil construction projects to ensure quality and cost. This position will be a travelling position where the qualified applicant will be required to integrate and travel with a project team or paving crew to assist with all functions of the project. The individual must be able to multi-task and work in a fast-paced environment. Some night and weekend work will be required. Traveling is required. $1500 Sign-On Bonus! • Bonuses Payable following 90 days of employment PRIMARY DUTIES • Manage job controls to ensure compliance with contract, budget, schedule, forecasting and job costing, • Supervise, direct, and assist project staff to ensure individual development and that project standards are met, and work is completed on time and under budget, • Develop and maintain project schedule and daily costs to ensure work is completed on time and under budget, • Provide technical support in construction planning, quality control, application of construction methods, resolution and documentation of design conflicts, and constructability reviews to ensure successful job completion, • Represent company during client and project management meetings to ensure effective communication, • Develop and maintain all material and submittal logs, • Review, analyze, management, and resolution of field coordination issues within project team, • Interpret project plans, specifications, and details for subcontractors and craft persons, • Perform other duties as assigned REQUIREMENTS • Bachelor's Degree in Civil Engineering, Construction Management or related field preferred, or equivalent combinations of technical training and related experience, • 7+ years of construction estimating support, engineering, field support, or similar experience, • Proficiency with Blue Beam and OST preferred but not required, • Proficiency with Heavy Job and HCSS preferred but not required, • Valid driver's license and acceptable MVR in accordance with Company Vehicle Program policy is required, • Ability to pass a pre-employment drug test is required, • Ability to complete work tasks under various adverse weather conditions including heat in excess of 100 degrees, cold, and rain, • MUST BE WILLING TO TRAVEL Fisher Industries is an Equal Employment Opportunity Employer. Pre-employment physical and drug testing are required. If you require an accommodation to submit an application, please email or call 701-456-9184 and ask for the HR Department to request an accommodation. This email is only to request accommodation to the application process and is not an email to inquire about the status of your application. Job Posted by ApplicantPro

Job Description Title: Service Engineer Reports to: Service Coordinator Location: DMG MORI USA- Arizona Hours: Full Time, Core Business Hours Classification: Non-Exempt Travel: 50% or more Annual Base Salary Range: $83k (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Machine installation, maintenance, and repairs., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Provide assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers . Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening.

Job Description Please note; this role is based in Phoenix! POSITION SUMMARY The Director of Acoustical Engineering is responsible for overseeing the Acoustical Engineering function in developing, releasing, and maintain acoustical products according to MiTek business needs. Establishes policies and procedures that produce high-quality acoustical designs. ESSENTIAL FUNCTIONS • Lead acoustical development team to develop, document, and maintain products., • Participate actively in the acoustical development process to drive on-time release date commitments., • Responsible for overall acoustical architecture., • Assist acoustical development team in attaining optimal team performance by removing technical obstacles., • Develop and manage Acoustical Engineering designs utilizing standard development tools., • Work effectively with Product Managers and Project Managers to ensure delivery against agreed priorities., • Stimulate hiring, career plans, training as well as performance reviews for the Acoustical Engineering team., • Review all documents related to Product requirements and participate in product brainstorming sessions., • Responsible to analyze, design, develop and support all acoustical products., • Ensure the team’s adherence to the MiTek M7 development gate system., • Build lean, technically strong, accountable, fearless, high-performing teams that can collaborate and challenge each other to produce the best outcome., • Create, implement, and maintain a continuous improvement plan for acoustical development., • Ensure that technology standards and best practices are maintained across the organization., • Drive consistent standards and approaches throughout the development team., • Establish clear organizational structures and succession plans aligned with appropriate responsibilities, accountabilities, and personal development for all development staff in line with anticipated growth., • Ensure proper maintenance and provisioning of the acoustical lab and equipment., • Manage all Acoustical Engineering budget and resource allocation., • Manage joint development with 3rd party vendors as well as outsourced development., • Hire engineers and coordinate their training., • 10+ years of experience in leading engineering teams, solving complex problems in enterprise offerings, analyzing challenges, and establishing strategies and processes for resolutions, • 10+ years of experience leading senior professionals, including managers and architects, • 10+ years of experience with commercial and/or pro audio products, • Experience with DSP (Digital Signal Processing) tuning preferred Computer Skills • Proficient with all MS Office Software (Word, Excel, Power Point, and Outlook), • Experience with SolidWorks 3D CAD is a plus, • Proficient understanding of MLSSA, LEAP, LMS, EASRA, TEF, Audio Precision Software, and Klippel, • Proficient experience of vibration theory, structural mechanics, and failure analysis of materials, • Proficient experience of materials used in audio manufacturing, • Willing to travel on a periodic basis internationally, • Extensive experience with acoustics, noise control, and acoustical modeling, • Requires advanced skill with hand-tool utilization including wrenches, screw drivers, drills and metal shears, • Proficient experience with calibrated measuring devices including vernier caliper, micrometers and electronic multimeters, • Excellent project management skills, • Comfortable with multiple, simultaneous responsibilitiesCompany DescriptionMiTek Corporation is a family owned and operated parent company to brands including MTX Audio, Xtant, Coustic and AtlasIED. MiTek's experience in designing, manufacturing, and selling high performance commercial, mobile, residential, marine, and motorsports audio has created some of the best equipment on the market.MiTek Corporation is a family owned and operated parent company to brands including MTX Audio, Xtant, Coustic and AtlasIED. MiTek's experience in designing, manufacturing, and selling high performance commercial, mobile, residential, marine, and motorsports audio has created some of the best equipment on the market.

Job Description Essential Duties and Responsibilities: • Evaluate production equipment performance and efficiency., • Perform load calculations and select appropriate FEEDERS for system stability., • Conduct preventive maintenance on transformers, generators, UPS, and batteries., • Monitor key equipment in the central control room in real-time, including power consumption., • Develop system documentation (PM job plans, operating instructions, action plans, training) and lead root cause analysis (RCA) for electrical system failures., • Manage PA system operations, including installation, maintenance, and user training., • Ensure maintenance meets OEM and AHJ/Code requirements., • Coordinate with utility providers on load management and downtime., • Manages the Electrical Load Database to ensure distribution and source maintain redundancy and capacity for future expansion. Reviews ground fault, electrical coordination and Arc Flash Analysis and works to mitigate risk., • Develop and review plans, specifications, cost estimates, and safety plans., • Provide training and troubleshooting for electricians to ensure safe switching and subsequent work., • Ensure all requirements as specified by the manufacturer of equipment systems are met, and equipment operations, repairs, modifications, and maintenance meet environmental protection requirements., • Perform additional duties as needed, including ERT. Required Qualifications: • Bachelor's Degree in Electrical Engineering required. • A minimum of 3 years of relevant post education experience as an electrical engineer. • 3+ years of experience in maintenance with extensive knowledge of infrastructure design. • Previous knowledge in the operation of industrial and/or commercial processing equipment, semiconductor or Electric Utility experience is preferred. • Must have knowledge of industry standards, codes and regulations, and the ability to apply to maintenance operation of site Electrical Power systems. • Proficiency with electrical engineering principles, practices, process, design/build, and the application to permitting and project work-related issues. • Demonstrates competence and comprehensive knowledge concerning adjacent disciplines such as controls, water, gas and chemicals or mechanical. • Well-defined specific knowledge of relevant engineering and electrical construction laws, codes, regulations, compliance practices, and record-keeping requirements. • Demonstrated critical thinking and problem-solving skills required to apply technical knowledge to reach conclusions from testing results, data collation, computations, statistical analysis and arriving at the most effective, economical, and logical solution. • Demonstrated effectiveness at coordinating and assertively directing subcontractors. • Experience with Hook-Up & Lay-out - Matrix review of production equipment, preparation of bidding documents, on-site supervision, equipment turn-on, and handover. • For expansion construction, experience performing all tasks related to planning, design, construction, completion, and various permits. Physical Requirements: • Must have the ability to safely climb ladders, and work at elevation from ladders, scaffolding, lifts, roofs, or platforms, and the ability to work in confined spaces.

Job Description The successful candidate is responsible for the programming, support and new development.

Job DescriptionDescriptionAt Wilson Engineers, we specialize in designing and delivering critical water and wastewater projects that serve communities across Arizona. With more than 200 professionals, we pride ourselves on being an ethical, innovative, and collaborative firm where employees thrive and grow. We are seeking an experienced Electrical Engineer with a Professional Engineer (P.E.) license to join our Tempe, AZ office. In this role, you’ll design and oversee the delivery of electrical and control systems that power essential infrastructure, working side by side with engineers, project managers, and construction teams. This is a 40-hour onsite position that offers hands-on collaboration, visibility on high-profile projects, and the opportunity to make a direct impact on Arizona communities. What You’ll DoCodes & Compliance • Apply a strong working knowledge of NFPA 70 (National Electrical Code), NFPA 70E, NFPA 101, and NFPA 820., • Ensure all designs and reviews meet industry standards and safety requirements.Project Delivery, • Lead and support the preparation of Electrical, Instrumentation, and Controls (EI&C) contract drawing packages in AutoCAD., • Review shop drawings, respond to RFIs, perform field inspections, and support startup and commissioning activities., • Lead, review, and interpret power system studies and arc flash studies., • Collaborate closely with engineers, project managers, contractors, and clients throughout design and construction.Tools & Technology, • Proficient with Microsoft Office Suite and AutoCAD., • Experience with SKM for electrical power distribution modeling a plus. What We’re Looking For • Undergraduate degree in Electrical Engineering from an accredited university., • Professional Engineer (P.E.) license required – Arizona preferred., • Minimum 3 years of electrical and industrial controls engineering experience, ideally in the water/wastewater industry., • Minimum 3 years of experience producing EI&C contract drawing packages in AutoCAD., • Strong written and verbal communication skills, with the ability to work independently and as part of a team., • Ability to read and interpret P&IDs and control descriptions a plus. Why Join Wilson Engineers? • Impactful work – contribute to essential water and wastewater projects that directly serve Arizona communities., • Career growth – opportunities for advancement within a growing, Arizona-based firm., • Collaboration & stability – work side-by-side with multidisciplinary teams in a supportive, long-term environment.

Job Description About Cousins Properties: Headquartered in Atlanta, Cousins is a fully integrated, self-administered and self-managed real estate investment trust (REIT). Cousins has a simple, compelling strategy: Premier urban Sun Belt office portfolio, Disciplined about capital allocation, Best-in-class balance sheet, with Strong local operating platforms. Acting through its operating partnership, Cousins Properties LP, primarily invests in Class A office buildings located in high-growth Sun Belt markets. Cousins Properties (NYSE: CUZ) develops, owns, and manages a 20 million square foot trophy office portfolio in the high-growth Sun Belt markets of Atlanta, Austin, Charlotte, Dallas, Nashville, Tampa, and Phoenix. Founded in 1958, Cousins creates shareholder value through its extensive expertise in the development, acquisition, leasing, and management of high-quality real estate assets. The Company has a comprehensive strategy in place based on a simple platform, trophy assets, and opportunistic investments. For more information, please visit . Job Summary: The Building Engineer - Commercial Office will be responsible for the hands-on maintenance of building systems for the safe, efficient, and proper operations of all assigned properties. This role will perform repairs and help in the operation, monitoring, and performance of preventative maintenance on building systems as necessary. This position is located in Tempe, AZ. This position is on-site. This is not a remote or hybrid position. (For Cousins' internal candidates - this is equivalent to a Grade I Engineer position.) Responsibilities: Electrical Systems: • Possess an understanding of A.C. circuits and safety procedures, • Trouble-shoot and find short circuits or ground in single or three-phase A.C. circuits, • Possess an understanding of the refrigeration cycle. Must have passed the test for a universal CFC license, • Conduct preventative maintenance of air handling units, • Respond to HVAC calls and make repairs or adjustments as needed, • Test and adjust chemical treatment levels in water system, • Perform daily inspections on chillers. Make adjustments as necessary. Record findings in the chiller log., • Replace belts, motors, bearings, actuators, and valves on air handling units and cooling towers, • Adjust pneumatic or direct digital control (DDC) controllers and actuators for proper operation, • Adjust set points, start-up and temperature on building energy management system, • Trouble-shoot power induction units (PIU) or Fan Powered Terminal Units (FPIU) to determine if operating properly, • Possess an understanding of the plumbing systems, • Rebuild and repair flush valves and faucets., • Responsible for the replacement of wax bowel seal, remounting of toilet urinals and lavatories., • Responsible for the preventative maintenance of a systems pump., • Possess an understanding of the operation of the property’s life safety systems, • Identify and respond to fire alarm and trouble calls. Properly enable and disable points., • Repair and replace door closures, door hardware and door operators, • Adjust and repair security systems Required or Preferred Knowledge, Skills, and Abilities: • A minimum of six years of experience in the building maintenance industry., • High School Diploma or GED required., • Must be knowledgeable in the safe and proper use of the following tools: ladders, lifts, basic hand tools, volt meter, manual drain auger, plumber’s helper, safety goggles, ear protection, and fire extinguisher., • Extensive knowledge in Chiller and Boiler operations is required. Must be able to operate heavy equipment such as chillers, generators, switchgear, pumps, air handling units etc., • Must have excellent organizational and problem-solving skills., • Must possess excellent customer service skills., • Must be a team player, able to work outside the core business hours when needed and willing to accept a variety of tasks associated with this position., • Must possess strong interpersonal skills and an ability to work and communicate effectively with all levels of operations., • Must be a self-starter and able to work well with minimal supervision., • Must be able to speak, read, write, and understand the primary language(s) used in the workplace., • Must be willing to work rotating shifts., • Responsiveness – Need to perform responsibilities with an acute sense of urgency to meet the needs of others; respond to solve problems; willing to accept a variety of tasks associated with this position, • Integrity - Demonstrate sound business ethics; consistently comply with organizational values; protect confidential information, • Customer Service – Demonstrate optimum customer service delivery while performing all job functions, • Must be able to stand and exert well-paced mobility for up to 4 hours in length, • Must be able to bend, stoop, squat, and stretch to fulfill cleaning and repair/maintenance tasks, • Must be able to lift up to 50 lbs. on a regular and continuing basis

Job Description Nammo Defense Systems Inc., a defense contractor, manufactures and supports shoulder-fired systems; energetic material solutions such as aircraft emergency escape systems, actuation devices, rocket motors, warheads, medium & large caliber ammunitions, mortar ammunition; and composite solutions including carbon fiber tubes and composite aero-structures. How you will be rewarded as a Process Engineer • Competitive Salary, • Monday-Thursday work week working four 10-hour days, • Off on Fridays, • Generous paid time off and Holiday Pay, • Medical, Dental and Vision Insurance, • 401(K), employee assistance programs, health savings account Position Summary: The Process Engineer is a technical expert responsible for overseeing the manufacturing process of composite propellant. They play a crucial role in determining the necessary steps to manufacture propellant and propellant-loaded devices, such as rocket motors and gas generators, while ensuring they meet engineering requirements. This position collaborates with various departments, including Program Management, Supply Chain, Operations, Research and Development, Quality, and Product Engineering, to ensure the success of the products. The Process Engineer contributes to the development of manufacturing processes for new products and provides support for existing production processes. They serve as the technical owner of the production process, encompassing chemical processing, equipment requirements, work instructions, tooling design, automation projects, support production operations, and facility design. Primary Responsibilities: • Apply engineering principles to safely process propellants, pyrotechnics, and/or explosives for product development or improvement, ensuring compliance with program requirements., • Develop processes, and techniques to enhance manufacturing capabilities and efficiency., • Document and maintain all process documentations, including but not limited to: Bill of Materials, Process Flows, Work Instructions, etc., • Understanding and experience in Design of Experiments (DOE), Failure Mode Effects Analysis (FMEA), and Process Hazard Analysis (PHA)., • Develop robust processes for failure analysis and drive continuous improvement., • Lead and participate in current and future product and facility development projects. Author comprehensive technical documentation packages including but not limited to: Test Plans, Test Reports, Presentations, Validation data package, etc., • Coordinate and perform all necessary validation and / or process engineering evaluations as needed for manufacturing equipment., • Deliver oral presentations summarizing progress on selected projects and programs to both internal and external stakeholders., • Provide technical support and training to Engineering Technicians and operations involving them on current and future project activities., • Estimate labor, equipment, and material requirements for production work and development projects., • Adhere to standard practices and safety procedures to maintain a safe working environment. Required Experience & Skills: • BS/MS in Chemical Engineering, Material Science or a related field., • Preferred 3+ years’ experience with propellants, pyrotechnics and/or explosives in manufacturing., • 5+ years’ experience in process engineering or related field, preferably in composite propellant manufacturing or a related industry., • Preferred strong knowledge of manufacturing processes and requirements for composite propellant and propellant-loaded devices or industry-relevant experience preferred., • A working knowledge of energetic material regulations and safe handling/measurement., • Familiarity with Program Management, Supply Chain, Operations, Research and Development, and Product Engineering processes., • Ability to diagnose and solve complex technical problems., • Excellent communication, collaboration, organizational and prioritization skills., • Ability to obtain approval through ATF to handle Nammo products and information. Note: Due to US Export Control laws and regulations; applicants selected for employment must show proof of a U.S. Person status before employment may begin.

Job Description HVAC/Plumbing Engineer Hazen and Sawyer is seeking an HVAC Engineer Position requires a minimum of three (3) years of experience in HVAC and Plumbing design Candidate will work within Hazen and Sawyer’s HVAC/Plumbing Group. The candidate can expect to work closely with more experienced HVAC Engineers to perform HVAC and Plumbing designs. The work will focus on municipal water and wastewater projects including planning, preliminary and final designs, and providing engineering services for projects in construction. It is preferable to have experience in the HVAC systems related to water and wastewater facilities, although relevant experience in municipal, industrial or commercial buildings and facilities is acceptable. The candidate should enjoy working within a team environment, and seek to develop HVAC and Plumbing design skills. Education and Experience requirements: • Bachelors of Science degree in Mechanical Engineering (preferred)., • Ability to communicate well both orally and in writing., • A minimum of (3) years of experience performing heating, ventilating, cooling, and plumbing design for municipal, commercial or industrial facilities., • A PE license is preferred, or the candidate must have plans of obtaining their PE., • Experience with Revit and other CAD skills is preferred., • Relevant areas of experience includes:, • Application of various types of heating, ventilation, air conditioning, and hydronic piping systems, • Heating and cooling load calculations, • HVAC controls systems and building/facility management systems, • ASME B31.1 Power Piping or ASME B3.9 Building Services Piping designs, • International Mechanical Code, Plumbing Code and Fire Code, • Performance of detailed HVAC and hydraulic pressure drop calculations, • Performance of Plumbing pipe sizing and fixture count analysis, • SMANCA Duct Construction Standards, • NFPA 820 HVAC designs Must be Authorized to work in the US We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Job Description Hazen and Sawyer is seeking a Water Treatment Project Engineer for our Arizona offices located in Tempe, Tucson, and Goodyear. This role will support project engineering and management, and the development of water and potable reuse projects throughout Arizona, the Southwest and across the country. You will be a part of the Hazen Water and Reuse practice groups engaging, collaborating, and supporting water and reuse projects, and opportunities across the country as needed Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Your role will include, project engineering/management, design, planning, operational support with a focus on water treatment / reuse and drinking water projects, • Supporting proposal development., • Mentor junior drinking water staff., • Coordination and collaboration with clients., • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Supporting projects to meet client expectations, budgets, and quality requirements., • Following internal Hazen processes to ensure quality delivery of engineering projects for clients., • Technical responsibility for interpreting, organizing, executing, and coordinating assignments on small to medium projects., • Bachelor's degree in civil/environmental engineering, • PE license, • 5-12 years of experience in municipal water treatment, water quality, water treatment technology, or manufacturing, • Experience in successfully delivering projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description The Senior Principal Architect is responsible for design and management solutions that support the needs of Hazen client base. Develop schematic and complete design solutions in accordance with Hazen design standards. Coordinate with internal including engineering, project management, construction estimating, construction field staff and building code officials as well as external consultants to provide solutions that deliver the design intent effectively and efficiently. Participate in document production with other teams to ensure that all building components are fully integrated with one another. Requirements: • 10 years + broad-based architectural experience, including building infrastructure design., • Professional license and NCARB certificate or ability to obtain NCARB Certificate., • Experience with budget/schedule, and quality responsibility., • Experience in public bid projects., • Proficiency in Architectural design and quality responsibility., • Knowledge of building systems and their coordination/integration; Architectural, Structural, MEP, Civil, • Knowledge and working experience with building codes, environmental regulations and sustainability concepts., • Demonstrate experience with appropriate materials use and methods of construction, development of construction details and specifications of materials., • Proficient in Revit BIM software and AutoCAD a plus., • Plan, organize, and direct the architectural work throughout the project life cycle., • Supervise and direct a design team., • Manage a variety of projects from design concept through construction administration., • Interface/coordinate architecture and engineering disciplines to develop and execute architectural design concepts., • Communicate and coordinate with clients and consultants to ensure a clear understanding of project goals and expectations., • Experience running architectural project teams including communicating and coordinating with multi-disciplinary teams, obtaining agency approval, contract documentation, technical detailing, and construction administration., • Direct architectural team in effective execution in the development of the architectural construction documents (focus on detailing, specifications, and materials) and coordinate with architectural, BIM and engineering staff., • Ensure that the project undergoes standard quality assurance activities including QAQC reviews during each phase of the project., • Assist in development of project costs, budget, and schedule., • Provide senior level reviews of construction submittals and RFIs from contractors., • Complete projects on schedule and within budget. We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Job Description Description/Comment: Develops and modifies process formulations, methods and controls to meet quality standards. Recommends and implements improvements, modifications or additions to document work. Reviews product development requirements for compatibility with processing methods to determine costs and schedules. Integrates equipment and material capabilities to meet process module target specifications and technology target specifications. This is an individual contributor role that requires the use of judgement in applying professional expertise and is expected to work independently with minimal supervision. Roles typically require a university degree or an extensive amount of practical knowledge gained through experience. Job requires an understanding and application of procedures and concepts of own discipline. The job requires attention to detail in making evaluative judgements based on the analysis of factual information. This job typically requires a degree or equivalent and a minimum of 2 or more years experience.

Job Description Hazen & Sawyer is seeking an Assistant Instrumentation & Control (I&C) Systems Engineer to join our team in our Tempe office. This position will help deliver instrumentation and control system designs for water and wastewater projects to our clients. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management, • We foster a work environment low on bureaucracy and high in creativity, • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed, • Candidate will develop I&C system designs for the water and wastewater industry with the potential for Human Machine Interface and Programmable Logic Controller programming/ configuration work, • Candidate will develop Process and Instrumentation Diagrams (P&IDs), control system architecture drawings, and installation details; prepare instrumentation and control system specifications; prepare cost estimates for projects; and review & approve documentation developed by contractors. Must know how to use AutoCAD or AutoCAD Plant 3D or be willing to learn, • BS in Engineering, • Engineer In Training (EIT) or ability to obtain EIT, is required., • Familiarity with AutoCAD is desired, • Working knowledge of the National Electrical Code (NEC), National Fire Protection Association (NFPA), Life Safety Codes, and other related Codes is desired, • Strong verbal, writing and interpersonal skills are required for coordination with other disciplines and client interface, • Electrical experience is desired, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionDescription: • Develop end-to-end Generative AI solutions, from data ingestion to production deployment, with a focus on mortgage industry applications., • Fine-tune, evaluate, and optimize large language models (LLMs) for use cases such as automated document classification, loan condition generation, and borrower communication support., • Integrate AI into enterprise workflows to automate routine tasks, enhance underwriting decision support, and improve broker and borrower engagement., • Design and implement RAG pipelines using vector databases to power intelligent knowledge search for guidelines, pricing, and compliance references., • Leverage Azure AI Foundry, AI Services, Model Catalog, Agents, Guardrails, and App Services to deliver secure, scalable AI tools for lending operations., • Apply emerging AI research and tools where they create measurable value in loan processing, compliance monitoring, and risk assessment., • Ensure AI solutions align with MLOps best practices, emphasizing scalability, maintainability, and regulatory compliance., • Collaborate with Operations, Compliance, and IT teams to identify automation opportunities and drive AI adoption across the organization., • Develop, document, and refine prompt engineering strategies and multi-agent system workflows for mortgage-specific applications., • Ability to independently execute the complete AI solution development lifecycle., • Hands-on experience with large language models (preferably Azure OpenAI) and frameworks such as LangChain or Semantic Kernel., • Practical expertise with Azure AI Foundry, AI Services, Model Catalog, Agents, Guardrails, and App Services., • Strong Python programming skills and familiarity with machine learning engineering best practices., • Proven track record of transitioning AI solutions from prototype to production in enterprise environments., • Experience with vector databases and RAG architectures., • Cloud AI expertise (Azure or AWS) with a strong understanding of infrastructure and deployment strategies., • Familiarity with prompt engineering, multi-agent systems, and advanced LLM orchestration., • Understanding of MLOps, AI security, and compliance in regulated industries; mortgage or financial services industry experience is a plus.

Job Description Exciting opportunity to join BPG Designs, LLC as a Full Time CAD Technician! As a key player in our team, you will have the chance to showcase your skills and creativity in a hybrid work setting. With a competitive pay, your talent will be recognized and rewarded accordingly. Take your CAD expertise to the next level with us and be part of a dynamic company at the forefront of the construction industry. Are you ready to make your mark in the world of design and engineering? Apply today! You will have benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, and Paid Time Off. Are you excited about this CAD Technician job? As a CAD Technician at BPG, you can expect to work on a variety of exciting projects daily. Your tasks may include creating detailed drawings, collaborating with engineers and architects, and ensuring accuracy and precision in your designs. In this role, you will have the opportunity to utilize your software proficiency and problem-solving skills to contribute to the success of our projects. Your typical schedule will be Monday through Friday, from 7am to 4pm (Arizona Time), allowing you to maintain a healthy work-life balance while honing your CAD expertise in a supportive and collaborative hybrid work environment. Technical Skills Required • Proficient in AutoCAD (Map 3D preferred) for telecom or utility design, • Ability to read and interpret base maps, plats, utility records, and field sketches, • Familiarity with OSP/ISP standards (BSW, UG, aerial, conduit systems), • Experience drafting Plan & Profile views, As-Builts, and Fiber Routing, • Capable of using standard templates and layer conventions for telecom builds, • Draft buried and aerial fiber route designs from field notes, KMZ, or survey data, • Accurately place utilities, ROW, easements, property lines, and tie points, • Offset civil features (curbs, gutters, sidewalks, fences) as needed, • Label and annotate drawings per company and client standards, • Apply jurisdictional permitting requirements and standard engineering details, • Demonstrated experience with fiber design projects between 700–2000 feet in length, • Proven ability to take a project from concept to 100% completion with minimal oversight, • Performs quality control, redline correction, and self-checks effectively, • Communicates clearly with field teams, engineers, and project managers, • Organized, reliable, and adaptable in a fast-paced environment, • Strong attention to detail and ability to meet deadlines Job Posted by ApplicantPro

Job DescriptionDescriptionWilson Engineers with a staff of more than 210 personnel specializing in water and wastewater engineering and construction management. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an experienced Drainage Engineer - Civil Project Engineer (P.E.) to join our team. This position requires 40 hours per week in our Tempe office (This job is not remote nor hybrid). Looking to move to the Greater Phoenix area? Relocation assistance available! Essential Duties and Responsibilities • Create Grading and Paving designs utilizing Civil 3D feature lines and corridors to create highly accurate finish ground surfaces., • Create Sewer and Water pipeline designs utilizing gravity and pressure pipe networks within Civil 3D., • Create/label exaggerated paving, sewer, storm drain and water profiles in Civil 3D, • Understand advanced survey principles, able to import survey field points into Civil 3D, capable of generating easement/property boundary linework from legal descriptions, create/edit existing ground surfaces in Civil 3D, prepare legal description/graphic based on CAD linework and convert grid coordinates to ground coordinates based on scale factors., • Process LIDAR point cloud data in Recap and utilize to create existing ground surfaces in Civil 3D, • Ability to take technical direction from Project Managers or Principals and complete design tasks and elements., • Must possess a Bachelor of Science in Civil Engineering., • Requires a minimum of six (6) years of Grading and Drainage/Utility Pipeline design experience including construction-related engineering services., • A current Professional Engineer (P.E.) license is required; Arizona PE license or the ability to obtain is required, • Experience working in Grading and Drainage and Utility Pipeline fields. Relevant experience shall include site vertical grading design, drainage/sewer/water report preparation and specification writing., • Construction-related engineering services experience with the ability to review Shop Drawings, Specification, RFIs, issuing Engineers Directives etc., • Computer experience with Microsoft Word, Excel, Outlook, • Proficiency with Civil 3D, DDMSW (Rational Method and HEC-1 Models), CulvertMaster, FlowMaster, HY-8, Recap (LIDAR data) StormCAD, SewerCAD, SWMM, and WaterCAD software., • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus, • Relocation assistance available#LI-DH1

Job Description National Engineering firm with a focus on water engineering and water/wastewater facility design is looking for a Civil PE Project Manager to add to the Arizona team. The successful candidate will have experience with an emphasis on water/wastewater design projects for municipalities. As the Project Manager, you will supervise projects and provide technical direction to a team of junior and mid-level design engineers on water/wastewater facilities projects from initial studies through the final construction management. Oversight of the projects include the production of construction drawings to meet local, state and federal guidelines and standards. Must have an in-depth knowledge of civil engineering infrastructure projects, including paving, water, sewer, grading and drainage for a variety of water/wastewater municipal projects. Requirements: • BS Degree in Civil or Environmental Engineering, • 10 years of water and wastewater experience, • PE Rewards: • Excellent Benefits, • Tuition Reimbursement, • 401K Match, • Medical Insurance coverage

Job Description Job Title: Staff Engineer. SAP Security Location: Tempe, Arizona Overview: The SAP Security Engineer role is to architect security solutions, maintaining system/process integrity and SOX compliance. This includes partnering with an offshore team to review and fix GRC issues, new projects and ensure SOX and audit compliance. The SAP Security Engineer is also responsible for working with Business Process Owners (internal customers) on new projects, enhancements and process improvements. This individual will apply proven communication and problem-solving skills to solve issues related to the deployment of mission-critical SAP Security controls. What you will be doing: * Architect successful security solutions, maintaining system/process integrity and SOX compliance. * Partner with the offshore SAP Security team to ensure all requests are completed within SLA. * Direct and guide the offshore security team for day-to-day activities and new projects. * Review and fix all existing issues in the current GRC setup. * Ensure SOX and audit compliance of all systems and processes and perform regular audits. * Work with Business Process Owners (Customers) on new projects, enhancements and process improvements. Recommend the best practices and ensure timely implementation. What you must have: * Ten (10)+ years' experience with SAP Security Design, Implementation and Administration required, including production support experience. * Bachelor's degree in relevant field such as Computer Science, Information Systems, etc. Additional and relevant experience may be considered in lieu of education. * Demonstrated leadership qualities with the ability to delegate and provide guidance for routine tasks. * SAP Security experience using SAP GRC with any of the following: SAP ECC, S/4, SAP BI, SAP BPC, SAP BOBJ, SAP Enterprise Portal, SAP APO and SAP SRM applications is required. * Experience with enhancing and providing ongoing support for SAP GRC access control suite (ARA, EAM, and ARM). * Demonstrated experience in customizing SAP GRC 10 BRF plus rules and MSMP workflows. * Prior experience with SAP GRC role reaffirm and UAR. * Previous experience working in a global team with diverse cultures both within IT and Business user community. * Excellent written and verbal communication skills are required. * Previous experience with Business Role based security. * Proven experience with analyzing and resolving complex authorization problems utilizing various SAP tables to support security, transaction, and controls projects is required. Nice to have: * Experience with SAP Fiori and gateway authorizations is preferred.

Job Description East Valley A&E firm specializing in unique, interesting, and custom projects is looking to add a Mechanical Engineer in the Chandler, Arizona office (hybrid and some remote work availability for Phoenix, Arizona residents). As the senior-most Mechanical Engineer, you will be responsible for designing HVAC systems, air handlers, plumbing, and fire protection systems and work with diverse teams of engineers in other disciplines to design complex, interactive systems. You will also have the opportunity to lead junior engineers and designers, conduct construction observations, survey site conditions, and participate in full project client team meetings. Requirements: • Bachelors Degree in Mechanical Engineering, • PE registration, • 5-10 years of experience Rewards: • Great benefits package, • Complex, interesting projects, • Hybrid work schedule

Job Description Mechanical Engineer Tempe, AZ Direct/ Salary role, $80k - $160k (Jr.-Sr. level role open), Hybrid, Full Benefits, 401k match, ESOP, Tuition reimbursement This particular client is a mid-sized, 50-year-old, MEP Consultancy. They work on a wide variety of projects, including: Healthcare, Education, Science & Tech, Multi-Unit Residential, Manufacturing, Industrial, Plant/ Utility, etc. OVERVIEW The Mechanical Engineer will work on preparing contract documents and specs for complex building systems. The ideal Candidate will be tasked with design, calculations, analysis, project management, and field/ construction coordination activities. ROLE/ RESPONSIBILITIES/ HIGHLY PREFERRED EXPERIENCE Prepare mechanical system construction documents Technical design and quality control, mechanical system calculations and layouts Produce of construction document, Construction administration, site visits, and shop drawing review Project Management Revit, AutoCAD, Trane Trace HVAC system, ductwork, and hydronic design. BSME, BSAE or similar, EIT or PE preferred, 3+ yrs. experience

Job DescriptionDescriptionWilson Engineers has a staff of more than 190 personnel specializing in water and wastewater engineering and construction management. We are dedicated to delivering ethical, reliable, high-quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an experienced Water/Wastewater Project Engineer to join our team. This position requires 40 hours per week in our Tempe office (this job is not remote nor hybrid). Essential Duties and Responsibilities • Experience working in Water and Wastewater field. Relevant experience shall include design of treatment facilities, collection systems, booster and pump stations, water, reclaimed water, and wastewater master plans., • Experience with construction-related engineering services with the ability to review Shop Drawings, RFIs, issuing Engineers Directives etc., • Civil Engineering Degree (Professional Engineer (PE) license preferred)., • Minimum of four (4) to six (6) years of relevant experience in Water/Wastewater related design and experience with construction-related engineering services., • Ability to work in a team environment with the work involving studies, detailed design and engineering services during construction., • Ability to take technical direction from Project Managers or Principals and complete design tasks and elements. Ability to coordinate with multi-disciplinary engineering teams. #LI-DH1 BenefitsThe comprehensive benefits plan offered by Wilson Engineers exceeds industry standards, and is aimed at meeting each employee's personal and professional expectations. Benefits include personal time off, paid holidays, medical, dental and vision coverage; plus a flexible spending plan and short and long-term disability. Wilson Engineers also helps in securing your financial future by offering 401k plans with employer matching.Benefits plan offered to our full-time employees: • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus

Job Description Job Type: Test & Balance Field Engineer for the commercial HVAC industry to service the Tempe, AZ area with periodic national outreach. National TAB () is a high-performing certified test, adjust, and balance (TAB) & Indoor Air Quality (IAQ) company. We perform HVAC balancing for our clients, large and small, throughout the United States. Our technicians perform the certified testing, adjusting, and balancing of specialized heating, cooling, ventilation, and heat transfer systems in new commercial retail, design-build, and public projects. We provide all necessary equipment, extensive training, and ongoing support to our technicians, enabling them to provide the high standard of test and balancing services our customers rely on. All new associates will be based in the Tempe, AZ area with the opportunity to travel the USA in a wide and varied number of settings. Qualifications: Engineering degree or Mechanical Engineering Technology (MET) (or similar) degree preferred excellent math, mechanical and communication skills Efficient computer skills Willingness to travel Monday – Thursday (4-day work week) an average1- 2 weeks per month. We provide training and tools Grow with National TAB! National TAB is a NEBB certified firm and provides a career path for individual employees to obtain NEBB certification. To learn more about NEBB guidelines and certification visit Benefits: National TAB has partnered with Insperity HR services to provide excellent health coverage. In addition, we offer dental & eye insurance, paid holidays, vacation, sick days, and a simple retirement program. Compensation: Recent graduates from engineering technology programs (or similar programs) start with a base hourly rate with opportunity to earn additional quarterly bonuses & continuous growth. Candidates with experience have an opportunity for higher starting compensation. Company DescriptionNational TAB Intelligence is the nation’s leading provider of intelligence, insight, and knowledge around the operational, health, and environmental conditioning of our clients’ businesses. Our environmental leadership creates comfortable and intelligent environments that have positive impacts in all the communities we serve.National TAB Intelligence is the nation’s leading provider of intelligence, insight, and knowledge around the operational, health, and environmental conditioning of our clients’ businesses. Our environmental leadership creates comfortable and intelligent environments that have positive impacts in all the communities we serve.

Job Description Position Overview: We are seeking a licensed and experienced Structural Engineer to join our team. This role will focus primarily on semiconductor projects, with opportunities to work in related industries such as manufacturing, cleanroom, industrial, and commercial sectors. The ideal candidate is comfortable working in a fast-paced, multi-disciplinary environment and will be involved throughout the entire project lifecycle—from conceptual design through construction. Key Responsibilities: • Lead the structural engineering scope of projects, ensuring code compliance and technical accuracy, • Develop structural designs and produce construction documents for concrete, steel, and masonry structures, • Perform detailed load calculations, structural analysis, and design of building components, • Review and stamp engineering drawings and specifications, • Redline and review work completed by junior engineers, designers, and drafters, • Coordinate closely with in-house architectural, mechanical, and electrical teams to ensure cohesive design solutions, • Participate in job site walks to assess existing conditions, confirm field dimensions, and support construction progress, • Attend and contribute design reviews, presenting structural concepts and resolving design challenges, • Participate in multidisciplinary coordination meetings to align structural design with other engineering and architectural systems, • Participate in construction administration (e.g. RFI’s and Submittals), • Bachelor’s in Structural or Civil Engineering, • Active Professional Engineer (PE) license, • 5+ years of experience in structural design, with a preference for semiconductor or industrial project experience, • Proficiency in structural analysis and modeling software such as: RISA, • Proficiency in Revit for BIM coordination (strongly preferred), • Familiarity with AutoCAD and Navisworks for coordination and clash detection, • Working knowledge of Bluebeam Revu for markups and document review, • Experience working in cleanroom or controlled environment design, • Knowledge of vibration-sensitive structural systems and foundations, • Experience with seismic design considerations and detailing, • Familiarity with fabrication and construction means & methods Affirmative Action/EEO statement – Industrial Design recruits, hires, employs, trains, promotes, and compensates individuals based on job-related qualifications and abilities. Industrial Design is an equal opportunity employer and values diversity. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other status protected by law. Applicants please note: This position requires US work authorization, and we are not looking for out of country/outsourced support or remote workers of any kind. This opening is for local candidates residing in the metro phoenix area or those willing to self-relocate to this area only. All positions listed are full time in office roles with no opportunity for hybrid or work from home accommodations. If you are looking to work remote, please do not apply. All Staffing Agencies please take note: Industrial Design LLC will not accept unsolicited resumes or applications from any person/source other than directly from an individual candidate. All unsolicited resumes or applications provided to Industrial Design LLC by any method (Postal mail, Email Fax or Text), including directly to Industrial design by courier or personal delivery will be considered as property of Industrial Design LLC. Industrial Design will never pay a fee or commission for any hiring resulting from the receipt of an unsolicited resume or application. Any submission of an unsolicited resume or application which has delivered to Industrial Design which originates from an agency will be considered to have been referred by the agency free of any charges, fees or commissions. All agencies must obtain written approval from Industrial Design’s Principal, in advance, prior to submission any resumes or applications. Submissions then will only be permitted in conjunction with a fully executed service contract in place between the agency and Industrial Design LLC; service contracts will be specific to exact job openings only. Industrial Design LLC will not pay a fee or commission to any agency or agent that does not have a valid service agreement in place prior to communications related to the open position and potential candidate for that position. Agency agreements must be signed by the Principal member of Industrial Design LLC to be valid, no other Industrial Design LLC employee, representative or member is authorized to bind Industrial Design LLC to any agreements or contracts, written or verbal, regarding the placement of employment candidates by any agency or agent; these aforementioned conditions included any full time, part time, contract, temp to hire and staff augmentation position within Industrial Design LLC.

Job Description About Alta E&I Alta E&I is a leading Environmental and Infrastructure Engineering firm committed to delivering innovative and sustainable solutions. We specialize in a range of services from civil and geotechnical engineering to environmental compliance, dedicated to improving communities and infrastructure with cutting-edge technology and expertise. Position Overview: We are seeking a highly motivated and detail-oriented Environmental Engineering Manager to oversee and manage projects related to Process Safety Management & Risk Management Plan, Emergency Action Plans, Mechanical Integrity Audits, Compliance Audits, Process Hazard Analysis, and Spill Prevention Control and Countermeasure (SPCC) plans for our clients. This role will play a critical part in procuring, managing and supporting environmental and safety projects with a strong focus on EH&S compliance and risk assessment, along with excellent leadership and communication skills. Key Responsibilities: • Lead and support environmental and safety projects with a primary focus on PSM, emergency preparedness and Mechanical Integrity., • Lead a team of environmental and safety engineers and scientists to ensure client compliance and value added to our clients. Ensure compliance with regulatory requirements related to PSM, emergency action plans, and SPCC standards., • Conduct hazard assessments, PSM audits, and risk assessments to identify safety and integrity issues. Assist in the development and implementation of compliance plans for hazardous materials systems and environmental compliance tracking tools., • Establish maintenance and inspection protocols to ensure mechanical integrity of systems and develop improvement plans as needed., • Build and maintain strong relationships with clients, providing regular updates and reports on project status., • Support audits, inspections, and internal reviews related to environmental compliance and chemical safety. Qualifications: • Bachelor’s degree in environmental engineering, Chemical Engineering, or related discipline (Master’s or PhD is preferred)., • 3–5 years of experience in environmental engineering or compliance, with a focus on PSM, emergency preparedness, and mechanical integrity., • Familiarity with regulatory frameworks including PSM, RCRA, CWA, CAA, , OSHA HAZCOM, and local environmental laws., • Ability to inspire, motivate, and guide team members towards achieving common goals. Strong organizational and analytical skills with attention to detail., • Excellent written and verbal communication skills., • Ability to work independently and manage multiple projects simultaneously. Why Join Alta E&I? Welcome to Alta Environmental & Infrastructure! Alta E&I is a leader and client full-service Engineering, Surveying, Material Company, and Environmental company. We have partnered with the most reputable and knowledgeable architects, developers, building contractors, institutions, and government agencies. Alta provides performance driven solutions throughout the asset life cycle, from concept to decommissioning. These projects have primarily been in the Phoenix and Tucson metropolitan areas but have included other locations in the State of Arizona. Alta Southwest is one of the fastest growing premier Engineering company is the state. We strive to be the best technical services company to work with, work for and invest in! Join us and gain a career through training that promotes additional certifications allowing you to become a skilled worker in the industry. Benefits: As an Alta E&I employee you will receive the opportunity to enroll in our company sponsored benefits (medical, dental, vision, life, long term disability) and 401k plan. You will also receive 7 paid company holidays and accrue up to 10 paid days off. We pay for employee earned certifications, which include immediate pay increases. Join us and get a career! We are an equal opportunity employer and welcome applications from all qualified individuals, regardless of race, gender, disability, or any other protected status. We thank all applicants for their interest in this position; however, only those selected for an interview will be contacted. Join our team and help us make a difference in the world by promoting sustainability and protecting our environment. Apply today and become a part of our mission to create a greener, healthier future for all.

Job DescriptionTitleCivil Engineer Intern - Summer 2026 EOE StatementWe are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Description ABOUT YOU Are you an ambitious, self-starting leader with a passion to advance your career and problem solving skills at a rapid rate? Do you like the idea of growing your skills and knowledge of engineering, design, and business operations simultaneously? If the answer is, “Yes!”, we have an opportunity for you. CAGE Civil Engineering is currently seeking a highly motivated civil engineer intern to join our team this summer. At CAGE, our interns are provided not only immediate responsibility but unlimited opportunity. As a civil engineer intern with CAGE, you will have the responsibility to develop technical skills related to the production of design documents and calculations including code/ordinance research, site planning, stormwater management calculations, preliminary and final construction documents, stormwater pollution prevention plans, completion of permit documents, and other reports. WHAT WE CAN OFFER YOU We are dedicated to the well-being of our associates and are proud to be recognized as a Best Place to Work. Interns with CAGE are compensated for their efforts and provided a culture where entrepreneurial associates are able to create their own success. At CAGE, a core value is to treat everyone with respect, always. We are proud to be an equal opportunity employer, and all qualified applicants will receive consideration for employment. A DAY IN THE LIFE • Be a full-fledged member of a design team working on variety of residential, commercial, industrial and institutional projects, • Exposure to land development design concepts and consulting on a variety of projects, • Design and draft land development plans utilizing AutoCAD Civil 3D, • Experience preparing site plan, grading, and utility plans to illustrate site developability based on learned constraints, • Ability to meet with internal and external customers to review concept plans, discuss advantages to multiple approaches, and work to define direction of project, • Attend site visits to gather data for use in design, • In current pursuit of a BS in Engineering from an accredited university, • Familiar with CAD, • Focused, motivated, and results oriented, • Must possess a strong desire to learn and advance one’s technical skill, • Must demonstrate the ability to learn quickly and accept constructive criticism Professional Growth • Mentorship from peers and leaders, • Hands-on experience working on real projects and visiting sites, • Book club, happy hours & social events, • Inclusive, collaborative environment, • Compensation: Up to $25/hr At CAGE, we are problem solvers, we're cost-conscious designers and value engineers. Most importantly, our clients like us, trust us and want to do business with us. We are looking for people with the same enthusiasm, passion, and respect for hard work that brought us to where we are today. Are you a person that can make a difference at CAGE? If the answer is, “Yes!” we look forward to meeting you. CAGE does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies without pre-approval from the CAGE team. Pre-approval is required before any external candidate can be submitted. CAGE will not be responsible for fees related to unsolicited resumes and for candidates who are sent directly to hiring managers. LocationAZ - CHANDLER Full-Time/Part-TimeFull-Time About the OrganizationCAGE is a highly respected leader in civil engineering, surveying, and construction management services, known for our expertise in land development consulting. Our team of professionals is dedicated to delivering innovative and high-quality solutions tailored to our clients' unique needs. Committed to excellence and integrity, CAGE offers a collaborative and supportive work environment where employees can thrive and grow. Join us and become part of a company that values expertise, fosters professional development, and drives impactful projects that shape communities for the better. Powered by JazzHR xaQEvecoir

Job Description Scope: The Maintenance Technician is responsible for performing routine maintenance and repair tasks to uphold the hotel’s quality standards, ensure a safe and comfortable environment for guests, and support overall operational efficiency. Primary Responsibilities: * Complete assigned preventative maintenance tasks and minor repair work orders, such as replacing ceiling tiles, light bulbs, and patching vinyl surfaces. * Inspect and perform minor repairs on electrical systems including air conditioning controls, televisions, and lighting fixtures. * Assist in diagnosing and repairing basic plumbing issues such as leaks, clogged drains, and maintenance of sinks, toilets, kitchen, and laundry equipment. * Refurbish and maintain furniture and fixtures in guest rooms, including cabinets, tables, chairs, doors, and windows. Perform painting and finishing work as needed. * Respond promptly and professionally to guest maintenance requests and follow up to ensure resolution and satisfaction. * Maintain a clean and professional appearance in compliance with hotel grooming standards. * Adhere to all company policies, safety protocols, and standard operating procedures. * Perform other duties as assigned by the supervisor or management team. Benefits: * 401(k) and 401(k) matching * Health, dental, and vision insurance * Life insurance * Employee assistance program * Employee discounts * Tuition reimbursement * Referral program

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 100 personnel specializing in water and wastewater engineering and construction management. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an experienced, Water/Wastewater Modeling Engineer to join our team. This position requires 40 hours per week in our Tempe office. (This job is not remote.) Essential Duties and Responsibilities • The ideal candidate will have previous experience with water and/or wastewater system hydraulic modeling and planning efforts and have a strong interest in specializing in water and wastewater hydraulic modeling and system planning studies., • The candidate should be able to perform and manage technical work on water and wastewater system modeling and planning studies: evaluating water system water quality, planning water distribution and wastewater collection systems, analyzing historical demands/flows and preparing future demand/flow projections, pumping and storage capacity analyses, integrated water resource planning., • At least 3 Years’ experience in Water Distribution System and Wastewater Collection System Modeling, Master Planning and preparation of reports. Requirements • Civil or Environmental Engineering undergraduate degree with an emphasis in Fluid Mechanics, Hydraulics, and/or Water Resources., • Experience and/or familiarity with Geographic Information System (GIS) technology and GIS software (i.e. ESRI ArcGIS) + Capable in MSWord, MS Excel, and PowerPoint., • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus

Job Description Industrial Design LLC is a growing, full- Service A&E firm found in Chandler Arizona. Our core work revolves around design and engineering of Base build, Progressive build, and Site Infrastructure projects for industrial manufacturing companies; our largest client is a very well know Semiconductor manufacturer with multiple sites in the City of Chandler. In addition to infrastructure design and engineering we also offer in-house services for Tool Installation design, 3D Laser scanning, Concrete GPR, Trimble Point/Datums, 3D/BIM modeling, Vinyl System Labeling, and Industrial Layout. Summary - We are seeking a Senior Electrical Design Engineer with a current PE license to take on a key leadership role in the electrical design and development of complex systems for semiconductor-related projects. The ideal candidate will have extensive experience in electrical design, a deep understanding of semiconductor facility requirements, and the ability to collaborate with multiple disciplines within our firm. As a Senior Engineer, you will be responsible for leading a team of drafters, designers, and junior engineers, overseeing electrical design projects from concept to completion, ensuring compliance with industry standards, and mentoring your team to foster professional growth. Key Responsibilities: • Lead electrical design and engineering projects, mainly for the semiconductor industry, ensuring the highest quality standards are met., • Lead and manage a team of drafters, designers, and junior engineers, providing guidance, mentorship, and direction to ensure successful project delivery., • Perform detailed electrical system design, including power distribution, lighting, and backup systems, tailored to the unique needs of semiconductor facilities., • Collaborate with architectural, structural, civil, mechanical, process piping teams to integrate electrical systems seamlessly into broader project designs., • Ensure that electrical designs are compliant with local and national codes, as well as industry best practices and standards (e.g., NEC, IEEE, etc.)., • Oversee the preparation of electrical design documentation, including drawings, specifications, and calculation reports., • Conduct power system studies and simulations, including fault analysis, short circuit analysis, and coordination studies., • Review and approve work from junior engineers and technical staff, providing guidance and mentorship to foster their professional growth., • Interface directly with clients, contractors, and vendors to ensure smooth project execution and timely resolution of any design-related issues., • Ensure projects are completed on time and within budget while maintaining the highest quality standards., • Professional Engineer (PE) License in Electrical Engineering (required)., • Bachelor's degree in Electrical Engineering or related field., • 5-10 years of experience in electrical design engineering, • In-depth knowledge of electrical codes and standards, including the National Electrical Code (NEC), IEEE, and other relevant standards., • Proven track record of leading electrical design projects from concept to completion., • Experience managing and mentoring a team of engineers, drafters, and designers in the delivery of electrical systems., • Strong problem-solving skills with the ability to think critically and troubleshoot complex issues., • Experience with electrical design software such as AutoCAD, Revit, Easy Power, SKM, Etap or similar platforms., • Prior experience with Semiconductor, cleanroom or industrial projects., • Experience with medium and low voltage systems, backup power systems (UPS, generators), and electrical safety design in semiconductor manufacturing environments., • Familiarity with sustainable or energy-efficient design practices and systems., • Proficiency in project management and experience leading teams in a fast-paced, multi-disciplinary environment., • Master's degree in Electrical Engineering or related field., • Variety and Challenge: Work on diverse projects across the country, tackling problems you won't find elsewhere., • Collaborative Environment: Be part of a team that values creativity and innovation across all disciplines., • Growth Opportunities: Gain experience in all phases of design, from concept to completion. Affirmative Action/EEO statement – Industrial Design recruits, hires, employs, trains, promotes, and compensates individuals based on job-related qualifications and abilities. Industrial Design is an equal opportunity employer and values diversity. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other status protected by law. Applicants please note: This position requires US work authorization, and we are not looking for out of country/outsourced support or remote workers of any kind. This opening is for local candidates residing in the metro phoenix area or those willing to self-relocate to this area only. All positions listed are full time in office roles with no opportunity for hybrid or work from home accommodations. If you are looking to work remote, please do not apply. All Staffing Agencies please take note: Industrial Design LLC will not accept unsolicited resumes or applications from any person/source other than directly from an individual candidate. All unsolicited resumes or applications provided to Industrial Design LLC by any method (Postal mail, Email Fax or Text), including directly to Industrial design by courier or personal delivery will be considered as property of Industrial Design LLC. Industrial Design will never pay a fee or commission for any hiring resulting from the receipt of an unsolicited resume or application. Any submission of an unsolicited resume or application which has delivered to Industrial Design which originates from an agency will be considered to have been referred by the agency free of any charges, fees or commissions. All agencies must obtain written approval from Industrial Design’s Principal, in advance, prior to submission any resumes or applications. Submissions then will only be permitted in conjunction with a fully executed service contract in place between the agency and Industrial Design LLC; service contracts will be specific to exact job openings only. Industrial Design LLC will not pay a fee or commission to any agency or agent that does not have a valid service agreement in place prior to communications related to the open position and potential candidate for that position. Agency agreements must be signed by the Principal member of Industrial Design LLC to be valid, no other Industrial Design LLC employee, representative or member is authorized to bind Industrial Design LLC to any agreements or contracts, written or verbal, regarding the placement of employment candidates by any agency or agent; these aforementioned conditions included any full time, part time, contract, temp to hire and staff augmentation position within Industrial Design LLC.

Job DescriptionSalary: Job Description: We are seeking a talented and experienced Aerothermal Engineer/Analyst to join our innovative team. The successful candidate will have extensive experience in STAR-CCM+ or Ansys Fluent and a strong background in design optimization, aerodynamic load determination, HVAC simulation, aero-acoustic simulation, and the correlation of wind tunnel data to CFD analysis especially as it relates to high-speed jet aircraft. Key Responsibilities: • Aerothermal Analysis:, • Perform aerothermal analysis using STAR-CCM+ or Fluent to support the design and development of aerospace components and systems., • Correlate wind tunnel data with CFD results to validate models and improve simulation accuracy., • Determine aerodynamic loads and applicable use cases to ensure structural integrity and performance., • Design Optimization:, • Utilize design optimization techniques to enhance the performance and efficiency of aerospace systems., • Collaborate with cross-functional teams to integrate optimization results into the overall design process., • HVAC and Aero-Acoustic Simulation:, • Conduct HVAC simulations to evaluate and improve thermal management systems., • Perform aero-acoustic simulations to analyze and mitigate noise generation in aerospace applications., • Problem Solving:Analyze and resolve design issues, offering innovative solutions to engineering challenges., • Testing and Validation:Participate in prototype testing and validation to ensure designs perform under various conditions., • Continuous Improvement:Contribute to process improvements and best practices within the design and development team. Qualifications: • Education:Advanced degree in Aerospace Engineering, Mechanical Engineering, or a related field., • Experience:, • Minimum of 10 years of experience in the aerospace industry., • Proven experience with Siemens STAR-CCM+ or Ansys Fluent and CFD analysis of internal and external flows, including transonic conditions., • Strong background in correlating wind tunnel data with CFD results., • Expertise in design optimization and topology techniques., • HVAC design optimization including aero-acoustic considerations., • Preferred Experience:, • Proficiency with Siemens development ecosystem and workflow between NX, STAR-CCM+, and Simcenter 3D with Nastran., • Agile Development using Jira Sprint Methodology., • Familiarity with the Teamcenter PLM environment., • Analytical Skills:Excellent problem-solving skills with the ability to analyze complex technical data and provide effective solutions., • Communication:Strong verbal and written communication skills, with the ability to effectively present and document technical information to various stakeholders., • Competitive salary and benefits package., • Opportunities for professional growth and development., • A collaborative and innovative work environment., • The chance to work on cutting-edge aerospace projects with a talented team of professionals.

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 200 personnel specializing in water and wastewater engineering and construction management. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an experienced Civil Project Engineer (Grading/Drainage/Pipeline Design) to join our team. This position requires 40 hours per week in our Tempe office (This job is not remote nor hybrid). Looking to move to the Greater Phoenix area? Relocation assistance available! Essential Duties and Responsibilities • Create Grading and Paving designs utilizing Civil 3D feature lines and corridors to create highly accurate finish ground surfaces., • Create Sewer and Water pipeline designs utilizing gravity and pressure pipe networks within Civil 3D., • Create/label exaggerated paving, sewer, storm drain and water profiles in Civil 3D, • Understand advanced survey principles, able to import survey field points into Civil 3D, capable of generating easement/property boundary linework from legal descriptions, create/edit existing ground surfaces in Civil 3D, prepare legal description/graphic based on CAD linework and convert grid coordinates to ground coordinates based on scale factors., • Process LIDAR point cloud data in Recap and utilize to create existing ground surfaces in Civil 3D, • Ability to take technical direction from Project Managers or Principals and complete design tasks and elements., • Must possess a Bachelor of Science in Civil Engineering., • Requires a minimum of four (4) to eight (8) years of Grading and Drainage/Utility Pipeline design experience including construction-related engineering services., • A current Arizona Professional Engineer (P.E.) license preferred, • Experience working in Grading and Drainage and Utility Pipeline fields. Relevant experience shall include site vertical grading design, drainage/sewer/water report preparation and specification writing., • Construction-related engineering services experience with the ability to review Shop Drawings, Specification, RFIs, issuing Engineers Directives etc., • Computer experience with Microsoft Word, Excel, Outlook, • Proficiency with Civil 3D, DDMSW (Rational Method and HEC-1 Models), CulvertMaster, FlowMaster, HY-8, Recap (LIDAR data) StormCAD, SewerCAD, SWMM, and WaterCAD software., • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus, • Relocation assistance available#LI-DH1

Job Description You will be a key member of the new product development team ensuring the implementation of cutting-edge technology for medical devices is safe, effective, and compliant with industry practices. Working closely with R&D, Marketing, Advanced Operations, and Regulatory Affairs team members, you will be in a fast-paced environment with opportunities to win for yourself, the company, and patients around the world. This position is a hybrid between a traditional R&D Engineer and a traditional Quality Engineer. Additional Job Details: Candidate must reside within a commutable distance to Tempe, AZ and is expected to be onsite 3+ days/week at the facility and is not eligible to be fully remote.

Job DescriptionDescriptionWilson Engineers provides technically sound and feasible solutions that focus on client’s needs. Team dynamics and leading-edge technology lets our professionals implement forward thinking designs. With offices in Minden and Reno, Nevada (our home office is in Tempe, Arizona), we are well placed to serve our clients with Water and Wastewater Infrastructure, Grant Opportunities, Planning, Surveying, Site Development, Hydrology/Hydraulics, Landscape Architecture, Residential Design, Water Resources, Expert Testimony, Hazard Mitigation Planning, and Roadway Maintenance & Design. We are seeking an experienced Hydraulic Engineer - Civil Engineer to join our team. This position is 40 hours per week in our Tempe office. This position will support our Northern Nevada operations. Relocation assistance available for well-qualified candidates! Essential Duties and Responsibilities • Prepares hydrologic and hydraulic models using HEC-RAS, HEC-HMS, & Flo-2D., • Prepares hydrologic and hydraulic studies and FEMA permitting; prior floodplain modeling work experience in Douglas County is a preferable., • Researches jurisdictional drainage requirements for appropriate incorporation into design and construction drawings., • Oversees production of drainage design and construction drawings using AutoCAD & MicroStation, • Performs data management and prepare exhibits using ArcGIS and QGIS desirable., • Works as a member of a multi-discipline team., • Mentors EIT staff regarding hydrologic and hydraulic theory and practice, • Conducts site visits and document findings., • Bachelors degree in Engineering, • Minimum 5 years of drainage experience, • Professional Engineer (PE) license preferred, • Proficient with HEC-RAS, HEC-HMS, & Flo-2D, • Proficiency with ArcGIS and QGIS; GISP certification desirable, • Proficient in Outlook, Word, Excel, and PowerPoint, • Strong organizational and Communication Skills, • Works well in a Team Environment, • Strong attention to detail, • Strong knowledge of construction means, methods and techniques, • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus, • Relocation assistance available for well-qualified candidates!#LI-DH1

Job Description Hazen and Sawyer is seeking a Site Civil Engineer to support water and wastewater infrastructure projects with a strong focus on site design for our Arizona offices located in Tempe, Tucson, and Goodyear. This role involves both hands-on work in layout planning, piping systems, grading, paving, roadways, and stormwater infrastructure, as well as managing various stages of project development, from conceptual design to construction support. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Design and develop site layout plans including yard piping, roadways, grading, stormwater systems, and paving for water/wastewater projects., • Conceptual and preliminary design efforts, including field visits, data collection, alternatives analysis, and technical reporting., • Perform hydraulic calculations and contribute to hydraulic modeling tasks., • Permitting processes and evaluating design alternatives., • Coordinate work with sub-consultants and ensure design integration., • Prepare technical memoranda, reports, and electronic design deliverables., • Provide construction-phase support by reviewing contractor submittals and responding to RFIs., • Bachelor's degree in Civil, Environmental, or related Engineering field., • 5-12 years of relevant experience in civil/site development., • PE License required., • Strong communication skills and ability to work collaboratively with internal teams and clients., • Skilled in critical thinking and problem-solving for technical challenges., • Proficient in developing construction drawings from sketches, including site layout, drainage, and grading., • Experience in facility and site design planning., • Proficiency with Microsoft Office Suite (Word, Excel, Outlook, PowerPoint)., • Knowledge of local utility codes and permitting procedures., • Familiarity with stormwater modeling tools such as StormWise™, InfoSWMM, or HEC-RAS., • Master’s degree in Civil Engineering., • Comprehensive health benefits (medical, dental, vision, and prescription plans)., • Pre-tax flexible spending plans for medical, dependent care, and transportation., • Short and long-term disability, and employer paid life insurance., • Paid holidays, floating holidays, and paid time off (PTO)., • Employer-contributed 401(k) plan and additional financial planning support., • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships. Starting pay range for this position depends on skills, experience, education and geographical location.

Job Description Safety Engineer Location: Texas Salary: Competitive Experience Level: 3-5+ Years Description United Trades of America is seeking a Safety Engineer to support and enhance jobsite safety across our diverse construction portfolio. In this role, you'll help implement safety programs, enforce regulatory compliance, and build a culture where safety is embedded in every action. Whether working on aviation, education, multi-family, or civic projects, your impact will be felt daily. Responsibilities • Monitor and enforce project safety compliance on active construction sites, • Conduct daily safety walks, inspections, and audits, • Deliver onboarding, toolbox talks, and safety training sessions, • Investigate incidents, near-misses, and develop corrective action plans, • Maintain accurate safety documentation and reports, • Support project teams with site-specific safety plans and JHAs, • 3+ years of field experience in construction safety (GC preferred), • Knowledge of OSHA 1926 standards and local safety regulations, • OSHA 30-Hour Certification required; CHST preferred, • Strong interpersonal and observational skills, • Competitive compensation and career advancement opportunities, • Full medical/dental/vision benefits + 401(k) match, • A safety-first company culture with strong field support

Job DescriptionTitleProject Engineer EOE StatementWe are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Description CAGE is a highly respected leader in civil engineering, surveying, and construction management services, known for our expertise in land development consulting. Our team of professionals is dedicated to delivering innovative and high-quality solutions tailored to our clients' unique needs. Committed to excellence and integrity, CAGE offers a collaborative and supportive work environment where employees can thrive and grow. Join us and become part of a company that values expertise, fosters professional development, and drives impactful projects that shape communities for the better. Position Overview: As a Project Engineer at CAGE, you will be tasked with the preparation, scheduling, and coordination of design documents and calculations for various site development tasks. These include site planning, stormwater management calculations, preliminary and final construction documents, stormwater pollution prevention plans, completion of permit documents, and other relevant reports. You'll work under the guidance and supervision of the project manager to ensure smooth execution of all activities. Typically Reports To: Project Manager Typical Years of Experience: 3+ Key Responsibilities: • Manage site planning, stormwater management calculations, utility design, preliminary and final construction documents, stormwater pollution prevention plans, completion of permit documents, and other reports with the direction and guidance of the project manager., • Manage project communication with clients and build trust and relationships with clients through consistent delivery of quality products and service., • Utilizes time management and organizational skills to excel at project tasks., • Prioritize projects tasks for multiple ongoing projects., • Attend client/municipal meetings with the project manager to review project issues and pursue project approval, including technical meetings and public hearings with the direction and guidance of the project manager., • Attend project meetings with the direction and guidance of the project manager., • Coordinates with project subconsultants to obtain the necessary information for project design., • Continuously meets all deadlines or informs the project manager well in advance if a deadline cannot be met due to extenuating circumstances., • Assist the project team in preparing the project schedule and include all necessary tasks to define the critical path., • BS in Engineering from an accredited university., • 3+ years of experience., • EIT credentials (passing of the FE exam) preferred, but not required., • Proficient with CAD Civil 3D software., • Possess a firm understanding of engineering design for all aspects of site development such as site grading design, utility design, and storm management design., • Focused, motivated, and results oriented., • Embraces teamwork approach and possesses strong communication skills., • Must demonstrate a firm understanding of project flow and necessary project tasks. Professional Growth • Tuition reimbursement & on-demand training, • Clear career paths & promotion opportunities, • Book club, happy hours & social events, • Inclusive, collaborative environment, • Compensation: $80,000-$95,000, • The salary range provided is a general guideline. Final compensation will be based on factors such as experience, qualifications, skills, and overall alignment with the role and company needs., • Medical, dental & vision plans (HSA options), • Mental health resources & EAP access, • Hybrid work options, • Flexible time off - no accruals, • 7 paid holidays + 1 floating holiday, • Paid parental leave (4 weeks), • 401(k) with an up to 4% match, fully vested day one, • Life & disability insurance At CAGE, we excel as problem solvers, prioritize cost-conscious design, and deliver exceptional value to our clients. Crucially, we foster strong relationships built on trust and satisfaction. We seek individuals who share our enthusiasm, passion, and dedication to hard work which have propelled us to our current success. Are you ready to make a difference at CAGE? If so, we look forward to meeting you. CAGE Civil Engineering is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Join our team and contribute to the innovative solutions that drive our success. CAGE does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies without pre-approval from the CAGE team. Pre-approval is required before any external candidate can be submitted. CAGE will not be responsible for fees related to unsolicited resumes and for candidates who are sent directly to hiring managers. LocationAZ - CHANDLER Full-Time/Part-TimeFull-Time About the OrganizationCAGE is a highly respected leader in civil engineering, surveying, and construction management services, known for our expertise in land development consulting. Our team of professionals is dedicated to delivering innovative and high-quality solutions tailored to our clients' unique needs. Committed to excellence and integrity, CAGE offers a collaborative and supportive work environment where employees can thrive and grow. Join us and become part of a company that values expertise, fosters professional development, and drives impactful projects that shape communities for the better. Powered by JazzHR yF3i2iAGpH

Job Description Responsibilities: • Lead architecture and engineering strategy for infrastructure, backend, web, and mobile platforms., • Oversee GCP cloud operations, including Cloud Logging, Monitoring, Security Command Center, Secret Manager, Identity & Access Management (IAM), and Cloud Armor., • Architect, implement, and maintain our microservices platform using Node.js, NestJS, Go, Python, Postgres, MongoDB, and RabbitMQ., • Enforce best practices around authentication, authorization, and application security posture., • Manage large-scale containerized deployments using Google Kubernetes Engine (GKE) and containerd., • Lead Continuous Integration/Continuous Delivery (CI/CD) strategies leveraging Terraform and ArgoCD.

Job Description Comment: Develops and implements methods and procedures for process control, process improvement, testing and inspection to ensure that the products are free of flaws and function as designed. Designs and installs sophisticated testing equipment and performs product testing and analysis to maintain quality levels and minimize defects and failure rates. Analyzes reports and defective products to determine trends and recommend corrective actions. Collaborates with supplier representatives on quality problems, ensures that effective corrective actions are implemented and contributes to supplier quality improvement programs. This is an individual contributor role that requires the use of judgement in applying professional expertise and is expected to work independently with minimal supervision. Roles typically require a university degree or an extensive amount of practical knowledge gained through experience. Job requires an understanding and application of procedures and concepts of own discipline. The job requires the ability to make judgements based on practice and previous experience. This job typically requires a degree or equivalent and no experience.

Job DescriptionCompany Description Achieve is a leading digital personal finance company. We help everyday people move from struggling to thriving by providing innovative, personalized financial solutions. By leveraging proprietary data and analytics, our solutions are tailored for each step of our member's financial journey to include personal loans, home equity loans, debt consolidation, financial tools and education. Every day, we get to help our members move their finances forward with care, compassion, and empathetic touch. We put people first and treat them like humans, not account numbers. Job Description We are seeking a Staff Palo Alto Network Engineer to help mature and optimize our global network security environment with a focus on Zero Trust architecture, alignment to NIST cybersecurity frameworks, and proactive risk reduction. This role is critical to ensuring that our firewall infrastructure and security posture evolve in step with business priorities, regulatory compliance, and industry best practices. The ideal candidate brings deep experience in managing and refining Palo Alto Networks solutions across complex, hybrid enterprise environments. Beyond deployment, this position requires a strategic mindset—someone who can evaluate current controls, identify gaps, drive standardization, and lead continuous improvement efforts. Primary Responsibilities and Duties – This role will be focused on these key functions : * Serve as the subject matter expert for Palo Alto Networks firewalls, Panorama, and Prisma Access, ensuring ongoing performance, scalability, and consistency * Drive maturity of network security architecture, focusing on Zero Trust Network Architecture (ZTNA) and alignment to the NIST Cybersecurity Framework (CSF) and 800-207 guidelines * Lead ongoing optimization of firewall policies, rulebase hygiene, and configuration standards across environments * Define and enforce enterprise-wide security policy frameworks, including tagging standards, object naming conventions, and access control methodologies * Refine and maintain authentication profile integrations (e.g., LDAP, SAML, RADIUS, MFA) to support granular, identity-based security models * Collaborate with stakeholders to align firewall controls and network segmentation to business risks and priorities * Conduct periodic assessments and gap analyses to measure posture against best practices, compliance requirements, and internal audit standards * Participate in cross-functional projects to ensure network security is embedded in infrastructure lifecycle processes (e.g., change management, architecture reviews) * Maintain documentation, reference architectures, and runbooks to support knowledge transfer, audit readiness, and operational excellence * Provide mentorship and guidance to junior team members and collaborate with broader InfoSec, cloud, and infrastructure teams * Support security incident response by providing firewall data, analysis, and rule adjustments as needed Qualifications What you'll bring: * 5–8+ years of experience managing enterprise firewall environments, ideally in regulated or highly available environment * Expertise with Palo Alto Networks solutions (PA Series firewalls, Panorama, Prisma Access) * Deep understanding of Zero Trust principles and ability to apply them in real-world enterprise environments * Strong grasp of NIST CSF, 800-207, and other industry-aligned security architecture and control frameworks * Experience developing and managing firewall policy baselines, segmentation strategies, and governance documentation * Proficiency in managing authentication profiles and integrating identity platforms (e.g., Okta, Azure AD) with network controls * Experience in hybrid cloud and IaaS environments (e.g., AWS, Azure) and their impact on network security architecture Certifications: * PCNSE (Palo Alto Networks Certified Network Security Engineer) – Required * CCNP Security, CCNP Enterprise, or CCIE – Preferred * Security certifications such as CISSP, Security+, or GIAC – Strongly Preferred Preferred: * Familiarity with Cisco networking technologies (routing/switching, ISE) is preferred * Leading security hardening or firewall optimization initiatives * Developing internal standards aligned to Zero Trust maturity models * Automation and scripting experience (e.g., Ansible, Python, Terraform) is a plus * Exposure to SD-WAN or SASE frameworks * Education: Bachelors degree in Computer Science, Information Technology, Cybersecurity, or related field. Additional Information All your information will be kept confidential according to EEO guidelines. Achieve well-being with: • Hybrid and remote work opportunities for certain roles, • 401 (k) with employer match, • Medical, dental, and vision with HSA and FSA options, • Competitive vacation and sick time off, as well as dedicated volunteer days, • Access to wellness support through Employee Assistance Program, physical and mental health wellness programs, • Up to $5,250 paid back to you on eligible education expenses, • Pet care discounts for your furry family members, • Financial support in times of hardship with our Achieve Care Fund At Achieve, we’re changing millions of lives. From the single parent trying to catch up on bills to the entrepreneur needing a loan for the next phase of growth, you’ll get to be a part of their journey to a better financial future. We’re proud to have over 3,000 employees in mostly hybrid and 100% remote roles across the United States with hubs in Arizona, California, and Texas. We are strategically growing our teams with more remote, work-from-home opportunities every day to better serve our members. A career at Achieve is more than a job—it’s a place where you can make a true impact, have a sense of belonging, establish a fulfilling career, and put your well-being first. Attention Agencies & Search Firms: We do not accept unsolicited candidate resumes or profiles. Please do not reach out to anyone within Achieve to market your services or candidates. All inquiries should be directed to Talent Acquisition only. We reserve the right to hire any candidates sent unsolicited and will not pay any fees without a contract signed by Achieve’s Talent Acquisition leader. #LI-KM1