Trabajos cad design en Springfield, MissouriCrear alertas

Job DescriptionSalary: DOE JOB DESCRIPTION DEVELOPMENT PROJECT ENGINEER SUMMARY Under general supervision a Team Leader, is responsible for engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. TYPICAL PROJECTS Typical projects are public and private infrastructure projects. Example projects may include roads, bridges, storm water facilities, potable water systems, sanitary sewer systems, trails, parks, and site development. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Be enrolled as an Engineering Intern or hold a Professional Engineering License in the State of Missouri. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS * Pre-employment drug and alcohol screening * Valid Drivers License * Background screening including previous employment, education, criminal history, and driving record verification

Job Description JUMPSTART, ADVANCE, AND LOVE YOUR CAREER WITH SMSI! As a CAD Technician II, you will play a key role in supporting engineering and construction teams by producing detailed, accurate technical drawings and plans. You will work closely with engineers, project managers, and other stakeholders to ensure project specifications are met and drawings comply with applicable standards. Note: This role may require occasional visits to job sites to perform field verification, gather measurements, or support project coordination efforts. What We Offer: • Competitive salary and benefits package, • 401(k), • Health insurance, • Life insurance, Vision insurance, • Dental insurance, • Opportunities for advancement, • Paid time off, • Paid holidays, • Professional development and training opportunities, • Supportive, team-focused work environment, • Develop and revise detailed construction drawings and technical layouts using AutoCAD and/or Revit., • Interpret architectural and engineering design intent into clear and concise construction documents., • Coordinate with engineering and design teams to resolve conflicts or issues in drawings., • Ensure all drawings comply with industry codes, standards, and company guidelines., • Maintain organized drawing sets, revision logs, and documentation records., • Assist in field verification, measurements, and as-built documentation when needed., • Support various departments, including HVAC, plumbing, process piping, ammonia refrigeration, electrical, fabrication shop, and CSA (Civil, Structural, and Architectural)., • Collaborate with various departments to support project planning, permitting, and execution., • Review redlines and implement changes accurately and efficiently., • Aid in estimating hours for accurate bidding. Industries Supported: • Food & Beverage Production and Processing., • Pharmaceutical production and packaging., • Cold Storage and Industrial Refrigeration., • Commercial and Industrial Construction. Qualifications:, • Minimum of 3–5 years of experience as a CAD Technician in the construction or AEC (Architecture, Engineering, Construction) industry., • Associate degree or technical diploma in Drafting, CAD Technology, or related field desired (preferred but not required)., • Proficient in Revit and/or AutoCAD., • Strong knowledge of construction drawings, detailing practices, and building systems., • Ability to read and understand architectural, mechanical, structural, and electrical plans., • Familiarity with construction documentation, site layouts, and code compliance requirements., • Excellent attention to detail and organizational skills., • Ability to work independently and collaboratively under project deadlines. About Company SMSI is dedicated to providing the highest quality mechanical services performed in an honest, dependable, and efficient manner. SMSI offers lots of room to grow in a fast-paced company. We have been serving commercial and industrial markets for 30 years.

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Join our team at Olsson and take your career in civil engineering to the next level! We are looking for a highly motivated and collaborative civil engineer EIT with experience or interested in roadway and transportation engineering to work on challenging projects in urban and rural roadways, multimodal paths, and larger highways/interchanges. As a member of our roadway team, you will have the opportunity to contribute to a wide range of transportation-related projects and work alongside experienced professionals who are passionate about delivering high-quality results. You will be responsible for providing basic project design through CAD drafting, performing research and writing technical reports, and traveling to job sites for observation, as needed. At Olsson, we value growth and high performance, and we are committed to providing our employees with the resources and support they need to excel. You will have access to cutting-edge technology, ongoing training and professional development, and opportunities for career advancement. Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills, • Ability to contribute and work well with a team, • Excellent interpersonal and problem-solving skills, • Bachelor's Degree in Civil Engineering, • Engineer-In-Training (EIT) certificate, • 2+ years of relevant experience, • Familiarity with AutoCAD Civil 3D or MicroStation, a plus #LI-DNI Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Olsson provides multidisciplinary design services for mixed-use, commercial, and residential land development projects, along with municipal, industrial, sports, schools, and other site development types. As an Entry-level Civil Engineer - Site Design (Assistant Engineer), you will provide basic project design through CAD drafting, instruct drafters on how to create drawings of designs, and prepare project schedules. You may also perform research, write technical reports, and travel to job sites for observation. Primary Duties and Responsibilities: • Assists with project design elements for engineering projects utilizing familiarity with standard techniques and established methods., • Performs entry-level plan production and receives clearly defined instructions for necessary tasks., • Gains knowledge and experience working within design and modeling software., • Receives guidance from senior level staff to assist with project schedules and technical engineering calculations., • Contributes to limited portions of a broader project while under direct supervision., • Gathers and prepares research to assist with the assembly of technical reports., • May provide mentoring to student interns by answering questions and offering guidance with routine assignments., • Working collaboratively with others., • Having ownership in the work you do., • Strong communication skills, • Ability to contribute and work well on a team, • Bachelor's degree in engineering, • Must obtain Engineer Intern (EI) certificate, • 0-2 years+ related civil engineering design experience, • Knowledge of AutoCAD (Civil 3D is a plus) #LI-DD1 Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job Description HiFyve is hiring a Tool and Die Maker in the Manufacturing industry in Springfield, MO! Salary: $60,000/year + annual bonus Shift: 1st Shift (7:00 AM–4:00 PM) Location: Springfield, MO Benefits: Full benefits package About the Role This role supports manufacturing operations by maintaining, repairing, and fabricating tooling, jigs, and fixtures. The Tool and Die Maker works closely with maintenance and manufacturing engineering on tooling repairs and new tooling development. Job Responsibilities • Grind and sharpen production tooling within specified tolerances, • Diagnose, repair, and maintain tooling and stamping dies, • Assist with the design and development of new stamping and forming dies, • Fabricate jigs, fixtures, and tooling to support production needs, • Collaborate with maintenance and engineering on tooling improvements, • Read and interpret drawings and blueprints, • Use precision measuring instruments to verify tooling accuracy Qualifications • High school diploma or GED required, • Experience in a sheet metal manufacturing environment preferred, • CNC machinist and/or Tool and Die Maker experience preferred, • Ability to operate lathes, mills, grinders, and drill presses, • Proficiency using precision measurement tools (micrometers, calipers, etc.), • NC programming and CAD drawing experience is a plus If you're interested, please apply!

Job Description POSITION SUMMARY The Design Engineering Manager will lead cross-functional efforts to ensure product designs are optimized for efficient, cost-effective, and high-quality manufacturing. This role bridges design engineering and production, driving collaboration to reduce complexity, improve yield, and accelerate time-to-market. The Design Engineering Manager must have hands-on design experience and be proficient in CAD software such as SolidWorks, and will have the opportunity to build, grow, and develop their own design engineering team. CORE FUNCTIONS • Manage and mentor a team of DFM engineers, fostering innovation and continuous improvement through product design., • Define and implement best practices for manufacturability across product lines., • Oversee the design and development of tooling related to the enhancement of manufacturing processes, product changes, and new products that are consistent with a zero-defect level and low product cost., • Recommend changes, prepare cost justifications, and coordinate the design and development of current products., • Assist engineering, purchasing, and manufacturing personnel in troubleshooting or problem-solving activities., • Provide technical guidance on materials, processes, and assembly methods., • Identify design risks and propose solutions to improve scalability, reliability, and cost efficiency., • Drive standardization of components and processes to streamline production., • Ensure designs meet industry standards, regulatory requirements, and internal quality benchmarks., • Champion design reviews and manufacturability assessments throughout the product lifecycle., • Monitor emerging technologies and manufacturing trends to enhance competitiveness., • Lead initiatives to reduce waste, improve yield, and lower production costs through product design., • Ensure all engineering projects fit within the overall company goals and strategy., • Provide support to new product design engineering and production during the hand-off of a new product. Education and Experience • Bachelor’s degree in Mechanical, Industrial, or a related Engineering field is required., • 7+ years of engineering experience, with 2+ years of supervisory experience is required., • Lean or similar Continuous Improvement knowledge and experience is required., • CAD software experience is required., • Proven experience in DFM, new product introduction (NPI), and high-volume production environments is required., • ISO/IATF experience preferred. Required Licenses • Valid driver’s license required. Skills, Abilities, and Knowledge • Skilled in Microsoft Office., • Ability to read and understand technical drawings., • Ability to communicate effectively with others, both verbally and in writing., • Actively attends to, conveys, and understands comments and questions of others., • Mathematical skills commensurate with an engineering degree., • Ability to prioritize multiple projects and priorities through the analysis of business needs. Travel • Innovative – Displays original thinking and creativity; Meets challenges with resourcefulness; Generates suggestions for improving work; Develops innovative approaches and ideas., • Judgement – Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions., • Problem Solving – Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics., • Professionalism – Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments., • Safety and Security – Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly., • Teamwork – Balances team and individual responsibilities; Exhibits objectivity and openness to other views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone’s efforts to succeed., • Verbal Communication – Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. SUPERVISOR RESPONSIBILITIES • Manager+: Plans, organizes, evaluates, and directs the employees within the department function. Has direct reports. PHYSICAL REQUIREMENTS • This position is subject to medium work; Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Physical Activities • This position is subject to the following physical activities: reaching, standing, walking, pushing, pulling, lifting, talking, and hearing. Visual Acuity • The worker is required to have close visual acuity to perform an activity such as preparing and analyzing data and figures; transcribing; viewing a computer terminal; expansive reading; visual inspection involving small defects, small parts and/or operation of machines (including inspection); using measurement devices; and/or assembly of fabrication of parts at distances close to the eyes. Working Conditions RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep®, Bronco® and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, RealTruck’s 6,000+ associates operate from 35+ facilities across four continents. RealTruck’s industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 1,000 patents and pending applications. The company’s omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships.

Job DescriptionSalary: DOE JOB DESCRIPTION BRIDGE PROJECT ENGINEER SUMMARY Under general supervision a Team Leader, is responsible for engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. TYPICAL PROJECTS Typical projects are public and private infrastructure projects. Example projects may include roads, bridges, storm water facilities, potable water systems, sanitary sewer systems, trails, parks, and site development. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Be enrolled as an Engineering Intern or hold a Professional Engineering License in the State of Missouri. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS * Pre-employment drug and alcohol screening * Valid Drivers License * Background screening including previous employment, education, criminal history, and driving record verification

Job Description HiFyve is hiring for a Controls Engineer in Springfield, MO! • $90,000 - $100,000 + overtime when traveling (20%-30% travel), • Profit Sharing, • Bachelor’s Degree is NOT required, • Roughly $50/day per diem for meals (when traveling), • Direct bill to the client on lodging so the employee doesn’t have to pay upfront & be reimbursed (when traveling), • Mileage is reimbursed when traveling via car their personal car to a site (proof of insurance is required), • Cell phone reimbursement, • Relocation assistance for the right candidate Location: Springfield, MO Will travel 20-30%. The travel is to perform site surveys once the Pre-Sales Engineering Group sells a new contract. The travel is in 7 states: MO, KS, OK, KY, TN, AR, MS. The travel is usually 1-2 days in length for each trip. If the travel will cause you to be back late, you will stay overnight and come back during business hours the next day. About the company: They put in high-tech Automation / Controls / PLCs into correctional facilities (jails). Everything is integrated into innovative touch panels. These control the jail’s: utilities, lighting, water, door locks & the intercom system. NOTE: Extensive background check to meet hiring criteria The role: Controls Engineer You will help the company to integrate controls platforms into client sites in order to automate the facilities, by doing site surveys once the sales engineering group completes their systems drawings. This controls engineer goes on-site with the design (to automate the jail) and does the testing to ensure everything is going to work, comes back & makes any modifications or change requests. You need to have experience in CAD and Drafting standards You need to be able to produce system component and line level drawings Must be 100% proficient in PLCs and Relays Benefits: 401K w/ match Profit Sharing: 10% of the company’s profits get divvy’d up between the employees after the year ends & the profit sharing goes into their 401K (the amount is dependent on the role within the company) Medical/Dental/Vision: eligible first of the month after hired Scholarship fund for employees’ kids (submit application to win one of five scholarships) PTO: You get 40 hours the day you are hired & after 90 days you start accruing another 40 hours (year 1) 120 hours for year 2 140 hours for year 4 Keeps increasing up to 190 hours *They allow you to carry over PTO *They allow you to cash out PTO 4 times a year, as long as you keep a balance of 40 hours banked

Job DescriptionSalary: DOE JOB DESCRIPTION WATER/WASTEWATER/STORMWATER PROJECT ENGINEER SUMMARY Under general supervision a Team Leader, is responsible for engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. TYPICAL PROJECTS Typical projects are public and private infrastructure projects. Example projects may include roads, bridges, storm water facilities, potable water systems, sanitary sewer systems, trails, parks, and site development. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Be enrolled as an Engineering Intern or hold a Professional Engineering License in the State of Missouri. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS • Pre-employment drug and alcohol screening, • Valid Drivers License, • Background screening including previous employment, education, criminal history, and driving record verification

Job Description JUMPSTART, ADVANCE, AND LOVE YOUR CAREER WITH SMSI! We are looking for an experienced Project Engineer with a strong background in the construction sector. The ideal candidate will be responsible for designing, implementing, and maintaining mechanical systems across a variety of construction projects, ensuring safety, efficiency, and compliance with all relevant codes and standards. What We Offer: • Competitive salary and benefits package, • 401(k), • Health insurance, • Life insurance, • Vision insurance, • Dental insurance, • Paid time off, • Paid holiday, • Opportunities for advancement, • Professional development and training opportunities, • Supportive, team-focused work environment, • Design HVAC, plumbing, and other mechanical systems for industrial construction projects., • Provide engineering design and technical support for industrial ammonia refrigeration systems, ensuring safety, regulatory compliance, and energy efficiency., • Prepare detailed engineering calculations, plans, and specifications., • Review contractor RFIs, submittals, and provide technical review of project documents., • Collaborate with client architects, civil engineers, electrical engineers, and project managers to deliver integrated solutions., • Coordinate directly with CAD technicians and field members to provide reliable design support., • Conduct site inspections and provide support throughout the construction phase., • Ensure all mechanical designs and installations meet applicable building codes and regulations., • Participate in project planning, budgeting, and scheduling activities., • This role supports sales in quoting, design development, and customer interactions., • Willingness to perform other duties as deemed necessary. Industries Supported: • Food & Beverage Production and Processing., • Pharmaceutical production and packaging., • Cold Storage and Industrial Refrigeration., • Commercial and Industrial Construction. Qualifications:, • Bachelor’s degree in Mechanical Engineering (Master’s degree preferred)., • A Professional Engineer (PE) license is strongly preferred., • Minimum of 7+ years of experience in mechanical engineering within the construction industry., • Specific experience with ammonia refrigeration systems in industrial or cold storage environments is highly desired., • Proficiency with AutoCAD, Revit, and mechanical design software., • Solid understanding of building systems and construction processes., • Strong knowledge of mechanical codes and standards., • Excellent problem-solving, communication, and teamwork skills., • Ability to manage multiple projects and meet deadlines in a fast-paced environment. About Company SMSI is dedicated to providing the highest quality mechanical services performed in an honest, dependable, and efficient manner. SMSI offers lots of room to grow in a fast-paced company. We have been serving commercial and industrial markets for 30 years.

Job DescriptionSalary: DOE JOB DESCRIPTION TRANSPORTATION PROJECT ENGINEER SUMMARY Under general supervision a Team Leader, is responsible for engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. TYPICAL PROJECTS Typical projects are public and private infrastructure projects. Example projects may include roads, bridges, storm water facilities, potable water systems, sanitary sewer systems, trails, parks, and site development. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Be enrolled as an Engineering Intern or hold a Professional Engineering License in the State of Missouri. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS • Pre-employment drug and alcohol screening, • Valid Drivers License, • Background screening including previous employment, education, criminal history, and driving record verification

Job Description HiFyve is working with a company in Springfield, MO that is hiring a CAD Designer. Salary: $60k-$70k (could be higher for the right individual) Full Benefits Package Summary Performs design work, usually for a major project or several minor projects, simultaneously, under general direction of their immediate supervisor. Essential Job Functions ∙ Responsible for converting project information (e.g. specifications, general sales order information, data sheets, etc.) into drawings and other documentation that manufacturing then uses to produce a product. ∙ Identifies deviations in job scope, estimates magnitude of changes, and notifies the appropriate parties. ∙ Assures that design continuity is maintained throughout the entire project. ∙ Ensures communication flow, both verbal and written, is maintained within engineering and with other design and engineering disciplines. ∙ Executes quality control procedures. ∙ Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position ∙ Overtime is a mandatory condition of employment and frequent in this position Knowledge, Skills, Abilities (Competencies) ∙ Strong AutoCAD and Inventor skills ∙ Strong computer skills and familiarity with Microsoft Office suite of programs. ∙ Must be able to work on multiple tasks with little supervision in a fast-paced environment. ∙ Good English oral & written communication skills ∙ Shows initiative to perform duties beyond assignment-specific duties. ∙ Knowledge of engineering principles and techniques ∙ Knowledge of various fabrication methods and installation procedures ∙ A broad understanding of a wide spectrum of materials, their characteristics and their tolerances and limitations ∙ A general understanding of the operation of various mechanical systems. Education and Experience A two-year college degree in design, drafting or similar degree program is preferred. Without the degree a minimum of 2 years' experience is required. Company: -Great company, great culture, great reputation -83 years in business -The grandson of the original owner is now the President (has been for 12 or 13 years). When he (David) became President, culture became his #1 priority. They are a very transparent company: they review the financials every month with every single employee, to show how their day-to-day hard work is contributing to the overall financial success of the organization. -Family type atmosphere Perks & Benefits: -Annual Incentive Plan for all full-time employees (bonus): up to 10% for all employees -Generous PTO -1 Sick day, 1 floating day, 11 holidays -Tuition reimbursement -Medical/Dental/Vision: 30 day waiting period -401K with up to 4% match on an 8% contribution by you -In Springfield only, they partner with a standalone family medical clinic called Command. This gives you and your family (if you are on their insurance) 24/7 access to a physician and anything done at that clinic is 100% company paid. You also get a huge discount on medicine. They are looking into bringing this feature to Osceola in the future but are still piloting it in Springfield first.

Job DescriptionSalary: DOE JOB DESCRIPTION Bridge Project Manager As a Bridge Project Manager, you will play a pivotal role in providing project management, design and analyticalcivil-structural engineering expertise for a wide range of bridge and other civil infrastructure projects. Your primary responsibility will be to manage and design projects in compliance with applicable processes, codes and standards, while meeting customer specifications. This will require your ability to produce, review, or manage the production of design and construction documents for projects, from conceptualization to final construction. You will be an integral part of feasibility studies, designs, and reports, and you will be responsible for preparing, implementing, and assessing contract documents. In addition, you will lead design teams throughout all phases of the project, from bidding to completion, utilizing your leadership skills and technical knowledge to deliver high-quality results. SUMMARY Under general supervision of a Team Leader, a Bridge Project Manager is responsible for project management and engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Serve as Project Manager, Project Engineer, and Client contact on projects., • Participate in Business Development activities., • Sign and seal engineering work performed by you or that is performed under your direct supervision., • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Hold a Professional Engineering License in the State of Missouri, or obtain one within six months of employment. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS/LICENSING • Professional Engineering License in states as required for projects, • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS * Pre-employment drug and alcohol screening * Valid Drivers License * Background screening including previous employment, education, criminal history, and driving record verification

Job DescriptionSalary: DOE JOB DESCRIPTION Transportation Project Manager As a Transportation Project Manager, you will play a pivotal role in providing project management, design and analytical civil engineering expertise for a wide range of Transportation and other civil infrastructure projects. Your primary responsibility will be to manage and design projects in compliance with applicable processes, codes and standards, while meeting customer specifications. This will require your ability to produce, review, or manage the production of design and construction documents for projects, from conceptualization to final construction. You will be an integral part of feasibility studies, designs, and reports, and you will be responsible for preparing, implementing, and assessing contract documents. In addition, you will lead design teams throughout all phases of the project, from bidding to completion, utilizing your leadership skills and technical knowledge to deliver high-quality results. SUMMARY Under general supervision of a Team Leader, a Transportation Project Manager is responsible for project management and engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Serve as Project Manager, Project Engineer, and Client contact on projects., • Participate in Business Development activities., • Sign and seal engineering work performed by you or that is performed under your direct supervision., • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Hold a Professional Engineering License in the State of Missouri, or obtain one within six months of employment. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS/LICENSING • Professional Engineering License in states as required for projects, • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS • Pre-employment drug and alcohol screening, • Valid Drivers License, • Background screening including previous employment, education, criminal history, and driving record verification

Job DescriptionSalary: DOE JOB DESCRIPTION Development Project Manager As a Development Project Manager, you will play a pivotal role in providing project management, design, and analytical civil engineering expertise for a wide range of Development and other civil infrastructure projects. Your primary responsibility will be to manage and design projects in compliance with applicable processes, codes and standards, while meeting customer specifications. This will require your ability to produce, review, or manage the production of design and construction documents for projects, from conceptualization to final construction. You will be an integral part of feasibility studies, designs, and reports, and you will be responsible for preparing, implementing, and assessing contract documents. In addition, you will lead design teams throughout all phases of the project, from bidding to completion, utilizing your leadership skills and technical knowledge to deliver high-quality results. SUMMARY Under general supervision of a Team Leader, a Development Project Manager is responsible for project management and engineering design tasks, including detailed calculations, plan preparation and review, quantity take-offs, cost estimates, technical specification writing, inspections, CAD and other tasks as may be required. ESSENTIAL FUNCTIONS Responsibilities will include but not be limited to the following: • Serve as Project Manager, Project Engineer, and Client contact on projects., • Participate in Business Development activities., • Sign and seal engineering work performed by you or that is performed under your direct supervision., • Research design options codes and regulations applicable to the project and provide schematic level and preliminary designs while working closely with other team members., • Provide detailed final designs and produce mark-ups to incorporate in drawings., • Perform engineering calculations, analysis and design., • Produce engineering reports and plans., • May serve as a designated Client contact on some projects., • Perform quantity take-offs and prepare engineer's estimates for projects., • Coordinate directly with Surveyors on project surveying., • Coordinate directly with CAD Designers activities., • Coordinate work with outside consultants., • Utilize AutoCAD and/or Microstation software to prepare engineering design documents and basic drawings., • Perform field activities during design and/or construction such as observe and record existing field conditions, take and verify measurements within project area as necessary., • Prepare construction specifications for various types of projects., • Review shop drawings and material certifications. EDUCATION/EXPERIENCE/LICENSURE Bachelor of Science degree in Engineering or equivalent from an ABET accredited four-year college or university. Hold a Professional Engineering License in the State of Missouri, or obtain one within six months of employment. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is generally in an office environment, but occasionally will visit job sites during design or construction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is often required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Riding and/or driving in a vehicle is commonly required for up to 6 hours at a time. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position, with a minimum expectation of 40 hours per week. However, most work weeks will be 40 or more hours. Hours are somewhat flexible and some late evenings and/or weekends may be required. TRAVEL There may be occasional overnight travel for this position. Some local day travel may also be required. SKILLS AND MINIMUM REQUIREMENTS/LICENSING • Professional Engineering License in states as required for projects, • Proficiency with AutoCAD Civil and/or MicroStation, • Excellent computer skills in Microsoft Office Suite OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. OTHER REQUIREMENTS • Pre-employment drug and alcohol screening, • Valid Drivers License, • Background screening including previous employment, education, criminal history, and driving record verification

Job DescriptionDescription: Power Distribution and Make Ready Designer Overhead Utility Pole Design • Joint-Use Engineering • NESC-Compliant Make-Ready Work Location: Springfield, MO / Remote (U.S.) Are you an experienced Power Distribution Designer or Make-Ready Designer looking to support meaningful utility engineering projects? Join a team that values accuracy, collaboration, and long-term professional growth. ABOUT THIS OPPORTUNITY We are seeking skilled Make-Ready Designers (primary focus) and Power Distribution Designers to support engineering programs for major electric and telecom utilities. Ideal candidates bring demonstrated experience in overhead utility pole design, NESC application, clearance assessment, pole loading analysis, and construction package development. Useful design platforms include DDS, Katapult, O-Calc, GIS, MicroStation, AutoCAD, or client-specific drafting systems. In this role, you will review field/walkout data, evaluate existing attachment conditions, model pole loading, determine make-ready requirements, and prepare accurate construction-ready deliverables. Applicants without utility pole design or distribution engineering experience will not be considered. Note: This position is remote, but new hires must attend a 2-week paid, in-person orientation at our Perrysburg, OH headquarters. WHAT YOU WILL DO • Execute overhead distribution and make-ready design work orders while meeting quality, time, and budget expectations, • Apply established engineering design standards, NESC requirements, and internal processes, • Perform end-to-end make-ready, joint-use, and/or general distribution design, • Conduct permitting and easement research (pole ownership, ROW, property rights, approvals), • Collaborate with team members to resolve design challenges and ensure accurate deliverables, • Use design software such as AutoCAD, MicroStation, DDS, PoleForeman, O-Calc, Katapult, or client systems, • Perform quality control reviews when required, • Support additional duties as assigned TOP COMPETENCIES & SKILLS Make-Ready Engineering, Joint-Use Design, Pole Loading Analysis, Utility Pole Design, Overhead Distribution Design, NESC Compliance, Utility Engineering, Pole Attachments, Make-Ready Construction, Aerial Design, Utility Coordination, Right-of-Way Permitting, Pole Replacement Design, Make-Ready Estimates, Field Survey Interpretation, CAD for Utility Design, GIS for Utility Design, Electrical Distribution Design, Utility Construction Standards, Telecommunications Make-Ready Requirements: WHAT WE’RE LOOKING FOR • High school diploma or equivalent required; an associate degree or higher in engineering, drafting, or a related field is preferred, • Minimum 2 years of experience in make-ready engineering, joint-use design, or electric power distribution design (3+ years strongly preferred), • Proven experience in utility pole design, including NESC application, clearance analysis, pole loading concepts, and preparation of construction-ready design packages, • Proficiency with CAD or MicroStation; experience with DDS, Katapult, O-Calc, or similar utility design platforms is strongly preferred, • Solid understanding of power distribution construction practices, with the ability to learn utility-specific proprietary systems efficiently, • Must hold a valid driver’s license, maintain active auto insurance, and pass all required background, drug, and MVR screenings, • Authorization to work in the United States is required, • Willingness to travel occasionally, including minimal overnight travel when project needs require, • Ability to work a standard Monday–Friday schedule aligned to Eastern Time, with Central/Mountain/Pacific adjustments as appropriate PHYSICAL REQUIREMENTS • Ability to work for extended periods using a computer keyboard, monitor, and telephone, • Ability to prepare and analyze data, review detailed information, and work with design tools requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment, • Ability to communicate effectively through oral and written channels ABOUT SIGMA TECHNOLOGIES Sigma Technologies is a growing engineering and design firm with 500+ team members across 30+ states. For over 25 years, we’ve supported major power and telecommunications utilities with work that directly impacts communities nationwide. Our core values — Safety, Honesty, Truth, and Decency — shape how we work and who we hire. We are TeamSigma™. *To learn more about working at Sigma, view our video and career page. WHAT WE OFFER We want our Associates to stay healthy, happy, and secure. We offer a positive work environment with supportive coworkers, managers, and leaders, plus: • No-cost monthly healthcare plan option for employees, • Competitive pay, • Medical, dental, and vision plans with up to 80% of the premium sponsored by Sigma, • 401(k) plan with matching contributions up to 5% of salary, • Paid holidays, vacation, and sick time, • Education and professional licensing assistance programs This job advertisement is intended to outline the primary responsibilities and requirements of the role. It is not all-inclusive. Additional duties may be assigned as needed. This ad does not constitute an employment agreement, and job requirements may change based on organizational needs. Pay is commensurate with experience and education. Sigma is an equal opportunity employer and does not discriminate based on race, color, gender, sexual preference, gender identity, age, religion, national origin, disability, genetic information, veteran/military status, or any classification protected by law. PM22 #Remote

Earn at least $1770 driving with Uber when you complete your first 134 trips in 30 days.Driving is an easy way to boost your income while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).Get started today and we’ll provide support along

Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly.Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can

Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly.Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can

Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly.Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can

Earn at least $1770 driving with Uber when you complete your first 134 trips in 30 days.Driving is an easy way to boost your income while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).Get started today and we’ll provide support along

Earn at least $1770 driving with Uber when you complete your first 134 trips in 30 days.Driving is an easy way to boost your income while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).Get started today and we’ll provide support along

Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly.Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can

Earn at least $1745 driving with Uber when you complete your first 120 trips in 30 days.Driving is an easy way to boost your income while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).Get started today and we’ll provide support along

Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly.Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can

Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly.Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can

Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly.Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can

Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly.Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can

Earn at least $1770 driving with Uber when you complete your first 134 trips in 30 days.Driving is an easy way to boost your income while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).Get started today and we’ll provide support along

Earn at least $1745 driving with Uber when you complete your first 120 trips in 30 days.Driving is an easy way to boost your income while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).Get started today and we’ll provide support along

Earn at least $1745 driving with Uber when you complete your first 120 trips in 30 days.Driving is an easy way to boost your income while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).Get started today and we’ll provide support along

Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly.Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can

Earn at least $1745 driving with Uber when you complete your first 120 trips in 30 days.Driving is an easy way to boost your income while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).Get started today and we’ll provide support along

Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly.Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can

Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly.Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can