Trabajos cad design en Chula Vista, CaliforniaCrear alertas

Job Title: Packaging Design Engineer Sr. Location: 4545 Towne Centre Court, San Diego, CA 92121 Duration: 12 Months Work Arrangement: 100% Onsite Pay Range: $55–$60 per hour (W2) We are seeking a “Packaging Design Engineer Sr.” to join one of our leading healthcare clients. Position Overview The Senior Packaging Engineer will lead the design, standardization, validation, and optimization of inbound and internal logistics packaging solutions. This role ensures automation readiness, transportation efficiency, regulatory compliance, and packaging performance while supporting cross-functional and supplier initiatives. Key Responsibilities • Lead end-to-end packaging design (concept through mass production), including structural/material selection, 2D/3D CAD modeling, prototyping, testing, and cost optimization., • Conduct distribution studies and ensure compliance with ISTA/ASTM standards., • Own validation activities, including protocol development, execution, reporting, and deviation management., • Define supplier packaging requirements and perform risk assessments for damage reduction., • Support automation readiness and DFx reviews., • Lead root cause investigations and continuous improvement initiatives., • Collaborate with Procurement, Quality, Manufacturing, Logistics, and external vendors., • Provide project management and administrative support to leadership. Required Qualifications, • Bachelor’s degree in Packaging, Materials, Industrial Engineering, or related field., • 5–10 years of technical experience in packaging or manufacturing., • Strong knowledge of packaging validation, ISTA/ASTM standards, and DFx principles., • Experience in root cause analysis and process improvement., • Proficiency in CAD tools (AutoCAD, SolidWorks, Creo) and pallet optimization software (TOPS Pro, Cape Pack). We are looking for the candidate who are eligible to work with any employers without sponsorship. If you’re interested, please click “Apply” button.

Akkodis is seeking a Mechanical Design Engineer for a 6+ Contract position with a client located in San Diego, CA Pay Range: $50/hr - $60/hr (The rate may vary based on experience, education, geographic location, and other factors.) Position Responsibilities The Mechanical Engineer performs a range of non-routine technical mechanical design tasks and mechanical modeling using advanced CAD software. Emphasis on mechanical design of power equipment PCA packaging, rack mounted electronics and enclosures. Key Responsibilities: • Assists in performing electro-mechanical design, from concept through production release, of power electronics equipment comprised of complex assemblies of circuit board assemblies, magnetics, heat sinks, power semiconductors, electrical interconnects, and associated enclosures., • Assists with making engineering computations, writes specifications and adjusts in drawings of specifications., • Assists with providing mechanical engineering, • Verifies and checks completed work, checking dimensions, materials to be used and quantities., • Collaborates with cross-functional teams to optimize designs and processes., • Hands on testing and troubleshooting., • Provides production support. Qualifications: • Bachelor's degree in mechanical engineering or equivalent technical degree., • 2-5 years of experience with electro-mechanical packaging design for electronic assemblies and sheet-metal design., • Due to the nature of our programs and products, applicants must have the legal right to work in the U.S. and additionally must be legally authorized to access export-controlled information and source code., • Knowledge of 3D CAD design using Solidworks, and knowledgeable in design tolerance analysis and mechanical packaging of electronic equipment, sheet metal design, and drawing and documentation background., • Knowledge of fabrication processes used in producing sheet metal chassis and structural parts, injection molding of plastics, and machining., • Knowledge of (FEM) Finite Element Modeling (FEA) mechanical stress modeling and thermal analysis/modeling tools., • Competent in thermal design of cooling systems comprised of power devices and magnetics, heat sinks, and airflow using fans. Competency in liquid cooling is desirable., • Competent in characteristics in materials and plating, and design practices to prevent corrosion. Creative thinker capable of designing mechanical packaging and layout of electronic assemblies considering equipment cooling and airflow requirements., • Knowledgeable in applying concepts of (DFM) Design for Manufacturability and (DFA) Design Failure Analysis in design of electro-mechanical assemblies., • Knowledgeable in analysis and simulation of environmental conditions, such as temperature, humidity, shock and vibration. Competency in mechanical stress analysis and thermal analysis with (FEM) Finite Element Modeling software is desirable., • Familiar with Gerber files, etc., • Proficiency in MS PowerPoint, Excel, Word, and simple database applications., • Design background and performs mechanical engineering analysis (stress, vibrations, thermal), designs product packaging with consideration for low manufacturing cost, low material costs, serviceability and reliability If you are interested in this Mechanical Design Engineer job, then please click APPLY NOW. For other opportunities available at Akkodis go to ___. If you have questions about the position, please contact Sunny Kumar at . Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ___. The Company will consider qualified applicants with arrest and conviction records by federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Company Description Fire & Risk Alliance (FRA) is a trusted global partner specializing in fire protection engineering, process safety, risk management, emergency response, and applied research. Formed by experienced engineers and consultants from diverse backgrounds, FRA delivers innovative, practical, and cost-effective solutions. Our core principles include trust, excellence, quality, and loyalty to clients and each other. The company is dedicated to providing exemplary service and fostering personal relationships to address fire and risk challenges globally. Role Description This is a full-time, hybrid role for a fire protection engineering consultant in our San Diego, CA office. The primary responsibilities include developing technical reports for battery energy storage systems (hazard mitigation analyses, emergency response plans), designing fire protection systems (fire alarm, fire suppression) in AutoCAD, and conducting fire protection code consulting analyses (high-piled storage, hazardous materials, lithium-ion battery storage, alternate material and method requests, fire protection plan reviews). The role involves code analysis, report generation, and providing practical and code compliant resolutions to address the client's needs. The consultant will collaborate closely with a lead engineer for each project. Qualifications • E.I.T. or P.E. license preferred, • Proficiency in using AutoCAD and other CAD software for fire protection system design, • Strong written and verbal communication skills, • Excellent problem-solving abilities, • Bachelor's or Master's degree in Engineering or related field, • Ability to collaborate with a diverse team and clients, • Project management skills are a plus, • Knowledge of Hydraulic software packages is a plus

Rock West Composites, Inc. has an exciting opportunity for a Manufacturing Engineer. Rock West Composites, Inc. is an engineering and manufacturing company dedicated to providing innovative solutions for commercial and government customers. This position is located in our San Diego HQ office at 7625 Panasonic Way San Diego, CA and reports to the Director of Engineer. This location is primarily a small batch, prototype, and R&D facility supporting DoD, Space, and commercial clients. Position Summary: The Manufacturing Engineer is expected to oversee the activities associated with the planning, development, implementation and maintenance of manufacturing methods, processes and operations for new and existing products. This includes ensuring the effective use of materials, equipment, tooling and personnel in producing quality products at minimum costs. Under limited supervision, determines, for programs of the highest complexity for any customer, the optimal manufacturing methods and processes for producing company products. Generally, will see a product from start-up through satisfactory production, coordinating the manufacturing processes required to meet customer, government and company requirements. Primary Position Responsibilities: • Daily interface with Manufacturing and Program Managers to establish clear lines of communication and provide program/task status, • Creation of EBOMS, MBOMS, work instructions, travelers, process specifications and material selections, in support of production manufacturing programs. Maintain control of production processes, • Ability to mentor and develop junior staff, • Create part fabrication documentation as required to support manufacturing and quality, • Recommend and implement process improvements to improve part quality, reduce cycle-time and cost, • Support design concept activities for part and tool fabrication and use, • Support the resolution of technical problems at the direction of Program/Engineering management, • Interface with customer engineering and part/raw material suppliers to resolve technical problems, • Perform red-line duties to parts on shop floor and implement engineering changes to parts in process, • Address MRB conditions and recommend and implement corrective actions, • Supports management in assuming all safety regulations are met and maintain safe working environment, • Maintains a neat and orderly work area and supports the company FOD program, • Responsible for estimating requirements for staffing, time of production, and costs to provide relevant data for any operational decisions, • Will work closely with other manufacturing departments to coordinate, develop and implement relevant training for company employees Position Requirements: • Working knowledge of composites. Experience with composite materials and processing techniques such as wet-layup, autoclave, RTM, and compression molding, • Basic Knowledge of AS9100 quality management systems. Understand, follow and adhere to corporate Quality Management Systems on daily basis, • Mechanically able to assemble and disassemble parts and assemblies, • Experience with contact and noncontact inspection methods, • Experience with data acquisition systems to record temperatures, vacuum and pressure, • Organized, self-motivated, strong attention to detail and high level of accuracy, • Ability to manage multiple programs, set priorities and follow tasks through to completion, • Complete Bids and Proposals in support of new proposal activities, • Capable of working in an environment in which demands, and priorities are constantly changing Qualifications: • Minimum of 5 years of composite Manufacturing Engineering experience., • Bachelors degree in manufacturing or mechanical engineering, aerospace oriented preferred., • Strong job costing knowledge and ability to generate pricing proposals., • Minimum of 1 year of composite part fabrication, machining, bonding and assembly experience, • Must possess strong communication, interpersonal and analytical skills and be able to work effectively across all areas of the business, • Current computer literacy is a must, including proficiency in the use of the entire Microsoft Office Suite (i.e. Word, Excel, Access, PowerPoint, Project and Outlook, • Proficient with CAD/CAM preferably SolidWorks, • Experienced and proficient with blueprint reading/CAD model interrogation and in-depth understanding of GD&T., • US. Person under 22 CFR 120 (due to ITAR Restrictions Perks and Benefits: • 100% Employer Paid Medical and Dental, • Annual Bonus, • 401K - 5% match, • Employee Stocks Option Program, • 9/80 work schedule, • 8- paid Holidays, • PTO: Max. 4-weeks after 5 years of employment, • $2,500 tuition reimbursement Compensation: The pay range for this position falls within $105,000-$130,000. The final compensation will be determined based on experience, skillset, and other factors permitted by law. Why should you want to work with us? Rock West Composites cares about our employees! Not only do we offer great benefits to our full-time employees (Medical & Dental 100% employer paid, Vision, Paid Time Off and 401K match), we offer a fun and friendly working environment! Rock West Composites is an Equal Opportunity Employer. It is the policy of the company to provide equal opportunity for all employees and applicants for employment without regard to race, color, religion, religious creed, ancestry, gender, pregnancy, sex, sexual orientation, transitioning status, gender identity, gender expression, national origin, age, genetic information, military and veteran status, marital status, medical condition, mental disability, physical disability, or any other basis protected by local, state, or federal law. EEO is the law. We also prohibit compensation discrimination under all applicable laws. Certain positions require meeting the U.S. Person definition in 22 CFR 120.62. ITAR Requirement: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder) as defined by 8 U.S.C. 1101(a)(20), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, Must be authorized to work in the U.S. without the company’s immigration sponsorship now or in the future. Rock West Composites will not offer immigration sponsorship for this position. Rock West Composites will not seek an export authorization for this role. Rock West Composites maintains a Drug and Alcohol-Free Workplace. Depending on state law and the nature of the position, candidates who receive a conditional offer of employment may be required to complete a drug screening. Rock West Composites may also conduct drug and alcohol testing based on reasonable suspicion, post-incident, or for safety-sensitive positions as permitted by law. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact 858-537-6260.

Produce mechanical, electrical/electronic drawings from rough engineering sketches and preparing drawing layouts from one or more engineering sketches. Provide technical expertise in developing, modifying, and maintaining engineering drawings and documentation using computer-aided design (CAD) softw

Position Summary Under direct supervision, prepare detailed CAD drawings for construction projects, create and coordinate 3D model for HVAC systems. Qualifications · College degree or vocational courses in related field, plus 3-5 years’ hands-on experience · 3D BIM experience (modeling equipment sheet metal systems in REVIT) · 3D or 2D CAD experience with certification and experience in construction · 2D coordination experience (determining optimal ductwork route by overlaying architectural structural and MEP drawings in Blue Beam) · Able to create computerized conceptual designs and layouts, where at times, there is only a limited amount of pre-established design information available · Able to create detailed shop drawings, and submittal documents of a mechanical HVAC system for a particular project · Must be able to conduct official reviews, markups, and request for revisions on behalf of the company design documentation for a particular project · Familiar with the applicable codes for a particular project · Solicit, generate, review and/or finalize the selection criteria during the preconstruction phase of a project in conjunction with the Estimating Department for the major equipment and/or major subcontractor(s) · Requires good verbal and written communication and the ability to self-initiate activities, coordinate tasks and manage projects with strong attention to detail and follow-up • Requires strong customer service, excellent people skills and ability to build and maintain positive, supportive working relationships while maintaining an approachable and friendly demeanor, • Requires the ability to gain cooperation of others and work in a team environment, • Ability to multi-task and prioritize effectively, flexibly and responsively while working with competing priorities and deadlines · Prepares detailed shop drawings for projects. · Coordinates construction design with all trades. · Attends and participates in coordination meetings. · Converts red line drawings into As-Built drawings. · Efficiently and accurately drafts details from rough sketches provided by Project Managers, Supervisors and Superintendents. · Files and maintains drawings for fast retrieval when needed. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, talk and hear. The employee is frequently required to walk, use hands to type data, operate business machines, dial the telephone and reach with hands and arms stoop. The employee must frequently lift and/or move 10 lbs. and occasionally lift and /or move up to 15 lbs. Specific vision abilities required this job include close vision and the ability to adjust focus. WORK ENVIRONMENT The noise level in the work environment is usually low to moderate. Fast-paced work environment may require some travel to local job sites.

Description The Undersea Systems Division (USD) at Leidos currently has an opening for a Test/Mechanical Engineer to work in our San Diego, CA office. The USD operates at the leading edge of technology by designing, demonstrating, and deploying solutions to solve complex remote sensing problems for our Department of Defense customers. This is an exciting opportunity to contribute to system development and to gain experience for an individual with interest in maritime remote sensing, physics, sensors, system prototyping, algorithm and software development, statistics, machine learning, and artificial intelligence. Our focus is to develop capabilities and deployable prototypes and transition those to our Defense business segment. Primary Responsibilities. Candidate will be responsible for applying sound test engineering, mechanical engineering & design principles in the development of a HWIL system containing machined, structural, sheet metal, & “commercial off the shelf” component parts. Candidate will be responsible for bill of material development, system documentation and verification and component specification for mechanical assemblies. Candidate must be able to apply sound mechanical test engineering processes, such as drawing production, configuration management, and integration and development of complex mechanical systems. Basic Qualifications. * Bachelor's degree in Mechanical or Aerospace Engineering from an ABET-accredited university. * Candidate must have a minimum of 2+ years of combined experience in mechanical component / Hardware in the Loop testing. * Proficiency in finite element analysis (SolidWorks, FEMAP, Nastran, COMSOL), Machine Learning * Demonstrated experience in the following areas: * Test Procedure Development, Performance and Updates * Performance of System Testing Level Testing * CAD based software such as SolidWorks * Ability to work independently and as part of a multi-disciplined team; able to perform complex tasks applying engineering first principles. * Must have strong communication (written and verbal) and interpersonal skills. * Lead testing operations, reviews, run analysis, and define hardware test plans. * US Citizenship required with the ability to obtain a TS clearance. SUBSEAMSS If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. February 9, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $69,550.00 - $125,725.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Description POSITION DESCRIPTION: The Director, Manufacturing – Dental Prosthetics (DMDP) is the manufacturing leader for all custom products and is responsible for overseeing the safety and quality standards across all dental prosthetic product lines, along with a commitment to consistent on-time delivery. Other key responsibilities include working with VP, Operations to monitor, improve and drive efficiency in both production and general operations. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Leads and oversees the Argen Digital Manufacturing Center., • Providesexpert leadership and technical guidance across fixed, removable, and implant dentistry, including a strong working knowledge of porcelainapplications., • Ensures that the Sales team's requirements are heard and understood, as they are the voice of the customer. Champions quality excellence across the Argen Digital Manufacturing Center by setting andmaintainingbest-in-class quality standards., • Brings extensive experience in highly digitalworkflows,nesting, processing, and finishing, with the hands‑on capability to train, mentor, and elevate team performance., • Acts as the primary escalation point for quality‑related concerns, partnering closely with team leads to investigate, resolve, and proactively prevent issues while translating customer feedback into continuous improvement., • Works with the Digital manufacturing team to mitigate risks that couldimpactoperations and reputation. This involves assessing potential issues, developing contingencyplansand ensuring compliance with regulatory and industry standards., • Educates and supports employees without a dental background by clearly communicating the critical quality requirements of dental restorations., • Utilizes industry‑standard CAD and CAM software to support digital manufacturing workflows and quality outcomes., • Collaborates with Engineering to develop, implement, and continuously improve standard operating procedures (SOPs) and work instructions within the Argen Digital Manufacturing Center., • Communicates effectively and professionally with Quality, Manufacturing,Finance,and customer‑facing teams to ensure alignment and consistent execution., • Partners with the Business Development team to support the introduction of new products into the manufacturing workflow, ensuring quality requirements are defined from the outset., • Collaborates closely with the finance team to oversee budgets and monthly reporting for the manufacturing departments responsible for producing dental prosthetics and aids in product costing and return on investment (ROI) analysis for various projects., • Demonstrated success built ona strong foundationof education and hands-on experience; a high school diploma or equivalent isrequired, while a two-to-four-year accredited college degree or technical certificate is highly desirable., • Completion of a dental-related training program with formal certification is strongly preferred., • 10+ years of progressive experience in analog dental technology, with a proventrack recordof producing high-quality prosthetic outcomes., • 5+ years of hands-on experience in digital dentistry, including CAD design and additive and subtractive manufacturing workflows., • Current CDT accreditationstronglypreferred, reflectinga high levelof professional competence and industry recognition., • Broadexpertiseacross multiple disciplines of dental technology, enabling flexibility and informed decision-making., • This role requires a comprehensive understanding of fixed, removable, and implant dentistry, including porcelain application, and works collaboratively with cross-functional teams to address quality-related issues, enhance manufacturing workflows, and drive continuous process improvement., • Exceptional manual dexterity, precision, and hand–eye coordinationrequiredfor detailed dental manufacturing work., • Consistentlydemonstratea high levelof attention to detail and commitment to quality., • Proven ability to develop clear,accurate, and thorough documentation supporting quality control and manufacturing processes., • Ability to multi-task and prioritize., • Strong interpersonal skills and the ability to interact with diverse demographics., • Empathetic attitude and ability to handle challenging situations with patience and professionalism., • Excellent organizational and time management skills to prioritizetasks,projects effectively, • Ability to meet deadlines., • Strong problem-solving skills, with the ability to quicklyidentify, troubleshoot, and resolve workflow and production issues., • Solid financial acumen in the Dental manufacturing environment., • Excellent written and verbal communication skills, with the ability to effectively collaborate across teamsincluding excellent presentation skills toteach and communicate., • Experience mentoring and developing junior manufacturing technicians, fostering skill growth and quality awareness., • Strong drive for continuous learning and professional development within evolving dental technologies., • Able torepresentArgenin accordance withour Core Values., • Strong andpracticalknowledge of LEAN manufacturing principles and continuous improvement concepts preferred., • Demonstrated ability to learn and apply complex technical concepts through work instructions, standard operating procedures, and structured on-the-job training., • Knowledge of cGMP regulations ISO 13485, 21CFR Part 820, CMDR SOR/98-282, 93/42/EEC, RDC 16 2013, MHLW MO 169 and TG(MD)R Sch3 preferred.

Knowledgeable in applying concepts of (DFM) Design for Manufacturability and (DFA) Design Failure Analysis in design of electro-mechanical assemblies. Knowledge of 3D CAD design using Solidworks, and knowledgeable in design tolerance analysis and mechanical packaging of electronic equipment, sheet m

You will be part of an exciting silicon design group that is responsible for designing state-of-the-art ASICs. Use advanced CAD tools, mask design knowledge to layout corrections and robust physical design representation of circuits. We have an extraordinary opportunity for Digital Layout Designers!

The ideal candidate will have over 10 years of experience in rail design, strong leadership skills, and proficiency in CAD.

Job DescriptionSummaryThe San Diego office has an exciting opportunity for an Electrical Design Engineer with 0-3 years of experience. Our client is an award-winning engineering firm that has been named "Best Place to Work" for the past 15 years. Duties & Responsibilities • PreDesign & Field Investigation, • Conduct field surveys and review existing "as-built" drawings to assess system conditions and gather pertinent project information, • Prepare site assessment reports and collaborate with architects, engineers, and clients to define project scope., • Design Engineering, • Develop schematic designs, single-line diagrams, and load schedules for electrical systems., • Perform technical calculations (e.g., arc flash, short circuit, voltage drop, load flow) using tools like ETAP, SKM, EnergyPro, or IES VE., • Design power systems (normal emergency, renewable), lighting systems and controls, and lowvoltage infrastructure (fire alarm, security, voice/data, nurse call)., • Conduct lighting photometric studies, breaker coordination, arc flash studies, and medium-voltage equipment replacement design P2S., • BIM / CAD Coordination, • Create and manage detailed AutoCAD and Revit MEP models and drawings, ensuring CAD/BIM standards compliance., • Collaborate across disciplines (mechanical, plumbing, structural, civil) to ensure design coordination., • Construction & Commissioning Support, • Support construction administration by reviewing submittals, responding to RFIs, attending site meetings, and documenting punch walk reports., • Provide on-site construction assistance and engineering support, ensuring design intent is met ., • Participate in commissioning and quality assurance activities, including onsite testing and integration coordination ., • Energy & Sustainability Engineering, • Perform energy modeling and calculations to comply with Title 24, ASHRAE, and achieve LEED or NetZero design targets ., • Support sustainable design initiatives through energy optimization studies and lifecycle cost analysis., • Project Coordination & Client Engagement, • Coordinate design schedules, deliverables, and technical updates across multi-disciplinary teams and external stakeholders., • Act as a liaison during construction, ensuring client satisfaction and regulatory compliance. -Bachelor's degree in Electrical Engineering or related Engineering Field required -0-3 years of experience with Electrical Design -Association with IEEE is a plus -Experience with ETAP/SKM is a plus -Experience with AutoCAD and Revit MEP preferred Benefits Upon eligibility, some of the benefits offered include: • 13 Observed Company paid holidays a year, • Medical, Dental, Vision Plans, • Employer-paid Group Life Insurance, • Supplemental Insurance Plans such as: Accident, Critical Illness, and Pet Insurance, • Tuition & Training Assistance, • 401(k) program offers immediate vesting and employer match is 100%, not exceeding 4% of employee compensation

Job Description Senior Principal Robotics Process Engineer Description: Join our fast-paced and passionate team as a Senior Principal Robotics Process Engineer As we scale, you will be instrumental in building our foundation from the ground up. This is a dynamic, hands-on role for a self-starter who thrives in a fluid startup environment. You'll have the opportunity to work on cutting edge technologies, work closely with leadership, and develop and implement engineering practices that support our mission and growth. Your key responsibilities are as follows: Work independently and in a team while over-communicating with the manager and the teammates. Will mentor junior engineers. Execute complex engineering tasks involving planning, preparation, data/information collection and analysis and decision-making in a process involving peer reviews and documentation of the results. Use tenacity, patience, self-discipline and passion for excellence to assure accuracy of execution schedule, data quality/integrity, conformance to company best practices, clarity in communication and documentation. Use every opportunity to grow competency through mentorship, curiosity, communication, exposure and initiative Drive innovation in modeling, design, analysis, and alignment methods to support product roadmap. Perform alignment system architecture trade studies with complex and interdependent performance requirements. Support business development with architecture concepts, feasibility analysis, and white paper writing Support project engineering with project scope, schedule, and risk analysis. Requirements This position requires access to export-controlled information. Employment is contingent upon the applicant being a U.S. person as defined by 8 U.S.C. § 1324b(a)(3). Experience: A bachelors degree in mechanical engineering, Physics, or a related field A minimum of 5 years of relevant experience, ideally within a startup or technology company. Skills: Demonstrated successful execution of engineering tasks including use of mechanical CAD and quantitative analysis/programming tools, instrumentation and measurement, part fabrication or procurement, integration and test, data collection, analysis and documentation. Demonstrated successful execution of automated test or component alignment using robotics, machine vision, or electrical test equipment for photonics alignment. Demonstrated successful execution of engineering project to perform complex photonics alignment using robotics and automation . Startup Mindset: You're creative, flexible, and eager to wear multiple hats. You're passionate about building systems from the ground up and comfortable with ambiguity and change. Benefits The expected annual salary range for this position is $165,000-$225,000.

Job DescriptionDUTIES AND RESPONSIBILITIES The Electrical and Mechanical Computer-Aided Design (ECAD/MCAD) Engineer will be responsible for mechanical design tasks using SolidWorks, including creating models, detailed drawings, and Bills of Materials (BOMs). Additionally, this role requires expertise in Electronic Design Automation (EDA) tools, such as OrCAD Capture/Allegro or Altium Designer for schematic capture and Printed Circuit Board (PCB) layout. The ideal candidate will bridge the gap between mechanical and electronic design to ensure seamless product integration. This role supports engineering work that helps identify and define new restoration capabilities for the Navy’s C4ISR Restoration Depot, including designing, evaluating, planning, testing, and operating C4ISR electrical, electronic, mechanical, and/or computer components, equipment, and systems. Key Responsibilities: • Develop and maintain mechanical CAD models, detailed drawings, and BOMs using SolidWorks., • Perform schematic capture and PCB layout using OrCAD Capture / Allegro or Altium Designer., • Collaborate closely with electrical and mechanical engineering teams to ensure design accuracy and manufacturability., • Support design reviews and troubleshoot design-related issues., • Maintain documentation and revision control for mechanical and electronic designs., • Assist in prototyping and testing as needed. REQUIRED SKILLS/YEARS OF EXPERIENCE • Bachelor’s degree in Mechanical Engineering (ME), Electrical Engineering (EE), or a related field., • Certified in SolidWorks to develop 3D mechanical CAD drawings and simulations (modeling, diagrams, BOM generation)., • Experience with OrCAD Capture/Allegro or Altium Designer for schematic capture and PCB design and layout., • Strong understanding of mechanical and electronic design integration., • Excellent communication and teamwork skills., • Work closely with the Quality team to complete any First Article Inspection Reports or relevant Corrective and Preventive Actions and submit Technical Data Packages to Configuration Management., • 6 years of recent C4ISR or other relevant ME and EE experience in designs, builds, installations, testing, documentation, and recommending corrective actions. Travel Required: 0% Work Location: San Diego, CA This position is required to have and maintain a Secret US DoD security clearance. PREFERRED SKILLS • Utilizes ScanCAD to reverse engineer single and multi-layer PCBs back to schematic drawings., • Certifications in OrCAD Capture/Allegro, Altium Designer, and/or P-Spice are highly recommended., • Utilizes ScanCAD to reverse engineer single and multi-layer PCBs back to schematic drawings., • Utilizes Flying Probe Automated Test Equipment (ATE) to fault isolate production PCBs and identify manufacturing defects in new production PCBs., • Experience with test automation and scripting is a plus., • Quality Management System (QMS) experience that is compatible with ISO 9001:2015. REMARKS Must be able to communicate effectively in English, both verbally and in writing. Must be able to interface effectively with all levels of technical and management personnel. Compensation: $105K - $150K annual salary. Compensation for positions at Centurum vary depending on a wide range of factors including, but not limited to, location, responsibilities, skill set, and level of experience. EOE M/F/Disability/Veteran Benefits Full-time employees are eligible for the following benefits enrollment from their date of hire: • Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis., • Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent., • Basic Life Insurance - Company provided benefit for all full-time employees., • Supplemental Life Insurance - Optional life insurance coverage to employees at group rates., • Dependant Life Insurance - Optional coverage for dependents at a group rate., • Long Term Disability Insurance - Optional coverage available to employees at group rates., • Vacation and Sick Leave - Leave accrual is determined by length of service., • Holidays - The company observes ten paid holidays each year. Powered by JazzHR ciad78BQcu

As a CAD Engineer specializing in design verification (DV), you will play a crucial role in developing automation tools and flows for DV, enabling state‑of‑the‑art EDA tools for Qualcomm DV teams, exploring and applying the latest ML/AI technologies to improve DV workflow, and developing agent

Job DescriptionSummaryThe San Diego office has an exciting opportunity for an Electrical Design Engineer with 0-3 years of experience.Our client is an award-winning engineering firm that has been named "Best Place to Work" for the past 15 years. Duties & Responsibilities • PreDesign & Field Investigation, • Conduct field surveys and review existing "as-built" drawings to assess system conditions and gather pertinent project information, • Prepare site assessment reports and collaborate with architects, engineers, and clients to define project scope., • Design Engineering, • Develop schematic designs, single-line diagrams, and load schedules for electrical systems., • Perform technical calculations (e.g., arc flash, short circuit, voltage drop, load flow) using tools like ETAP, SKM, EnergyPro, or IES VE., • Design power systems (normal emergency, renewable), lighting systems and controls, and lowvoltage infrastructure (fire alarm, security, voice/data, nurse call)., • Conduct lighting photometric studies, breaker coordination, arc flash studies, and medium-voltage equipment replacement design P2S., • BIM / CAD Coordination, • Create and manage detailed AutoCAD and Revit MEP models and drawings, ensuring CAD/BIM standards compliance., • Collaborate across disciplines (mechanical, plumbing, structural, civil) to ensure design coordination., • Construction & Commissioning Support, • Support construction administration by reviewing submittals, responding to RFIs, attending site meetings, and documenting punch walk reports., • Provide on-site construction assistance and engineering support, ensuring design intent is met ., • Participate in commissioning and quality assurance activities, including onsite testing and integration coordination ., • Energy & Sustainability Engineering, • Perform energy modeling and calculations to comply with Title 24, ASHRAE, and achieve LEED or NetZero design targets ., • Support sustainable design initiatives through energy optimization studies and lifecycle cost analysis., • Project Coordination & Client Engagement, • Coordinate design schedules, deliverables, and technical updates across multi-disciplinary teams and external stakeholders., • Act as a liaison during construction, ensuring client satisfaction and regulatory compliance. -Bachelor's degree in Electrical Engineering or related Engineering Field required -0-3 years of experience with Electrical Design -Association with IEEE is a plus -Experience with ETAP/SKM is a plus -Experience with AutoCAD and Revit MEP preferred Benefits Upon eligibility, some of the benefits offered include: • 13 Observed Company paid holidays a year, • Medical, Dental, Vision Plans, • Employer-paid Group Life Insurance, • Supplemental Insurance Plans such as: Accident, Critical Illness, and Pet Insurance, • Tuition & Training Assistance, • 401(k) program offers immediate vesting and employer match is 100%, not exceeding 4% of employee compensationEmployment Type: Full time Location: San Diego, CA

Job Description Company Description Our client is a general contractor & Framing Contractor based in San Diego, California specializing in new construction multi-family and commercial projects. They operate as a comprehensive design, construction, and development company with a specialized division dedicated to framing and mass timber erection. Our primary focus is on internal projects ranging from 20 to 150 units, which we own. Additionally, we extend our expertise as subcontractors for framing and mass timber erection tasks. Holding both B general contracting and A general engineering licenses as well as having licensed architects on staff, we bring a versatile skill set to the construction industry. Role Description This is a full-time on-site role based in San Diego, CA for a Framing Estimator / Project Manager. The successful candidate will be responsible for managing and overseeing multiple aspects of the project from estimation to completion, working closely with clients, architects, engineers, and subcontractors to ensure that all projects are completed on time, within budget, and in compliance with all necessary regulations. This role will require experience in construction management, project coordination, and excellent communication and negotiation skills. Qualifications • Minimum of 5 years of experience in construction management, project coordination, and framing estimation for commercial and multi-family projects, • Experience with construction software such as Procore, Bluebeam, or PlanGrid, • Excellent organizational, communication, and negotiation skills, • Ability to read and interpret construction plans, specifications, and contracts, • Ability to do takeoffs and prepare material lists, • Experience with subcontractor management and scheduling, • Knowledge of all construction trades with a focus on electrical, mechanical, and plumbing, • Ability to work independently in a fast-paced environment, • OSHA 30 certification is preferred, • Coordination with general contractors & architects, • Prepare Bids for projects ranging from single family homes to large multifamily and commercial buildings., • Perform takeoffs for lumber & hardware, • Prepare Lists by level / phase, • Prepare cut sheets with stud heights, cut lists ect.

Job Description Company Description Our client is a general contractor & Framing Contractor based in San Diego, California specializing in new construction multi-family and commercial projects. They operate as a comprehensive design, construction, and development company with a specialized division dedicated to framing and mass timber erection. Our primary focus is on internal projects ranging from 20 to 150 units, which we own. Additionally, we extend our expertise as subcontractors for framing and mass timber erection tasks. Holding both B general contracting and A general engineering licenses as well as having licensed architects on staff, we bring a versatile skill set to the construction industry. Role Description This is a full-time on-site role based in San Diego, CA for a Framing Estimator / Project Manager. The successful candidate will be responsible for managing and overseeing multiple aspects of the project from estimation to completion, working closely with clients, architects, engineers, and subcontractors to ensure that all projects are completed on time, within budget, and in compliance with all necessary regulations. This role will require experience in construction management, project coordination, and excellent communication and negotiation skills. Qualifications • Minimum of 5 years of experience in construction management, project coordination, and framing estimation for commercial and multi-family projects, • Experience with construction software such as Procore, Bluebeam, or PlanGrid, • Excellent organizational, communication, and negotiation skills, • Ability to read and interpret construction plans, specifications, and contracts, • Ability to do takeoffs and prepare material lists, • Experience with subcontractor management and scheduling, • Knowledge of all construction trades with a focus on electrical, mechanical, and plumbing, • Ability to work independently in a fast-paced environment, • OSHA 30 certification is preferred, • Coordination with general contractors & architects, • Prepare Bids for projects ranging from single family homes to large multifamily and commercial buildings., • Perform takeoffs for lumber & hardware, • Prepare Lists by level / phase, • Prepare cut sheets with stud heights, cut lists ect.Employment Type: Full time Location: San Diego, CA

Job Description We are seeking a highly skilled Manufacture Process Engineer to lead and optimize manufacturing processes for Printed Circuit Board Assemblies (PCBA). This role is critical in ensuring high-quality, reliable, and cost-effective production through expertise in stencil design, soldering processes, wave solder profiling, conformal coating, and secondary operations. The ideal candidate will bring deep technical knowledge, hands-on experience, and a continuous improvement mindset to advance our PCBA manufacturing capabilities. ⚙️ Key Responsibilities • Process Development & Optimization, • Design, validate, and optimize stencil designs for solder paste application., • Develop and maintain reflow soldering profiles, including vapor phase reflow processes, to ensure robust solder joints and minimize defects., • Establish and refine wave soldering profiles for through-hole components., • Define and implement secondary operations including press-fit connector installation, heat sink attachment, and mechanical assembly steps., • Develop and oversee conformal coating processes to ensure environmental protection and product reliability., • Create and enforce rework standards for soldering, ensuring compliance with IPC and industry best practices., • Manufacturing Support, • Provide technical leadership to production teams in troubleshooting assembly issues., • Collaborate with design engineering to ensure manufacturability of PCB layouts and component selection., • Drive yield improvement initiatives and root cause analysis for process-related defects., • Lead Corrective and Preventive Action (CAPA) initiatives to eliminate recurring issues and strengthen process robustness., • Support new product introduction (NPI) by developing scalable and repeatable assembly processes., • Quality & Compliance, • Ensure adherence to IPC-A-610, J-STD-001, IPC-7711/7721, and other relevant industry standards., • Maintain documentation of process parameters, work instructions, and control plans., • Partner with quality engineering to implement corrective and preventive actions (CAPA)., • Continuous Improvement, • Lead projects focused on automation, efficiency, and cost reduction., • Evaluate and introduce new technologies, equipment, and materials to enhance PCBA processes., • Train and mentor junior engineers and technicians in advanced assembly techniques. Qualifications & Experience • Education: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Materials Science, or related field. Master’s preferred., • Experience: Minimum 7–10 years in PCBA manufacturing engineering, with proven expertise in:, • Stencil design and solder paste application., • Reflow soldering (including vapor phase reflow) and thermal profiling., • Wave soldering process development and optimization., • Conformal coating application and process control., • Secondary operations (press-fit connectors, heat sinks, mechanical assembly)., • Rework and repair standards for solder joints., • Root cause analysis and CAPA methodologies for troubleshooting and issue resolution., • Strong knowledge of IPC standards (IPC-A-610, J-STD-001, IPC-7711/7721)., • Hands-on experience with SMT equipment, AOI/X-ray inspection, and process monitoring tools., • Demonstrated success in NPI process development and scaling to volume production., • Excellent problem-solving, analytical, and communication skills., • Ability to lead cross-functional teams and drive process improvements in a fast-paced environment. Preferred Skills • Experience with Design for Manufacturability (DFM) and Design for Test (DFT) principles., • Familiarity with Lean Manufacturing and Six Sigma methodologies., • Proficiency in CAD tools for stencil and fixture design., • Knowledge of advanced soldering techniques (selective soldering, laser soldering)., • Strong project management and leadership capabilities.

Job DescriptionSummaryOur client, a top notch mechanical contractor, is currently seeking an experienced Plumbing Estimator for their San Diego, CA location. Backed by the strength and stability that comes with almost a century of customer care and ownership, they adhere to the highest safety standards for its employees and clients. They offer industry-leading building information modeling (BIM) capabilities, design/build services, sustainable solutions, commercial HVAC services, and complex mechanical and industrial system installations. Plumbing estimator is responsible for all phases of the estimating and bidding process including preconstruction services and performing estimate takeoffs. Thorough knowledge of the mechanical construction bidding processes is required. Specific expertise with Plumbing systems serving hotels, student housing, laboratories, power plants, Cogeneration facilities, manufacturing facilities, clean rooms, cGMP facilities and process systems for Pharmaceutical and microelectronics facilities is desired. Ability to produce a complete detailed estimate from incomplete design documents is preferred. Duties And Responsibilities Bid document review, pre-bid meetings, client interface, quantity takeoff, material, equipment and subcontractor pricing, spreadsheet input and proposal preparation. Estimates will be prepared using Quote Express estimating software. Experience with Quote Express or other on-screen estimating software is desired. Duties also include on site and/or In-house estimating where candidate will work with professionals in design firms on design-assist and design-build projects to direct the design to meet the budget. Estimator will also interface with construction project teams and CAD detailing staff. Must have knowledge regarding safety, worker’s compensation, insurance and bonding, materials as it pertains to bidding requirements. Other duties may be assigned. Qualifications Computer Skills Proficient in MS Word, MS Excel, Bluebeam, Internet, Lotus Notes, and QuoteExpress windows-based piping and sheet metal estimating systems. Required Attributes Must possess excellent written and verbal communications skills.Maintain a professional manner in actions and appearance when representing the organization.Must prioritize in a fast paced multi-task environment with organization skills.Must have demonstrated ability to perform basic business mathematical functions.Must work with minimal supervision.Must effectively manage time and details.Must interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Must have organizational skills in handling & archiving technical data.Must comply with all operating policies, procedures, plans, and programs. Prefer a minimum of 3-5 years mechanical construction experience and proficiency in the preparation of large and complex bid proposals of all types. Language Skills Must have the demonstrated ability to effectively communicate, cooperate, and collaborate with multiple levels of employees, vendors, and suppliers.

Job DescriptionSummary Are you an Electrical Engineer with 10+ years of experience looking to grow your career? Our client, in San Diego, is an award-winning engineering firm that has been named "Best Place to Work" for the past 15 years. Duties and Responsibilities • Pre-Design Engineering, • Perform field surveys for the design of electrical systems, gather information, and prepare site assessment reports, • Prepare electrical schematic designs, • Design Engineering, • Design power single line and riser diagrams, • Perform electrical calculations (arc flash, coordination, short circuit, voltage drop, load flow) using ETAP/SKM, • Lighting fixtures and power equipment selection, • Perform lighting and power circuiting, • Design and coordinate the lighting control system, • Prepare fire alarm device layout based on the International Fire Code and NFPA 72, • Design fire alarm riser diagrams, calculations, and sequence of operations, • Prepare enlarged plans, elevations, schedules, and details, • Understand and utilize CAD/BIM standards, • Have a working knowledge of California Electrical Code and Energy Standards to design medium voltage and low voltage electrical systems, • Coordination among different disciplines, such as mechanical, plumbing, telecom, civil, structural, and architectural. Work in close contact with the entire design team, • Edit specifications for projects, • Project Management, • Demonstrate ability to manage multiple large-size projects involving other senior engineers and sub-consultants, • Provide mentorship to design engineers, • Prepare proposals independently for clients, • Demonstrate active development of business with new and existing clients, • Construction Administration, • Review and respond to RFIs, • Review equipment submittals, • Degree: Bachelor or Master degree in Electrical Engineering, • Registered Professional Engineer License required, • Minimum 10 years experience preferred, • Ability to manage projects, PM experience preferred, • Able to lead electrical design projects and a team of design engineers, • Demonstrate project management skills., • Experience using AutoCAD, ETAP/SKM, and Revit required, • Familiar with HCAI requirements, • Be self-motivated, inquisitive, detail-oriented, adept at looking at underlying issues, and willing to work in a fast-paced environment, • Possess strong record-keeping and organizational skills Benefits Upon eligibility, some of the benefits offered include: • 13 Observed Company paid holidays a year, • Medical, Dental, Vision Plans, • Employer-paid Group Life Insurance, • Supplemental Insurance Plans such as: Accident, Critical Illness, and Pet Insurance, • Tuition & Training Assistance, • 401(k) program offers immediate vesting and employer match is 100%, not exceeding 4% of employee compensationEmployment Type: Full time Location: San Diego, CA

Job Description Summary We are currently seeking a Structural Drafter to join our growing team. This role is key in translating structural engineering concepts into precise, detailed drawings that guide construction. The ideal candidate is skilled in computer-aided design (CAD) and/or BIM software, detail-oriented, and experienced in structural drafting across a variety of building types. Duties & Responsibilities * Drawing & Drafting * Prepare detailed structural drawings and plans using AutoCAD, Revit, or similar software, under the supervision of structural engineers * Draft construction documents including foundations, framing, floor plans, sections, and details * Update and revise drawings based on markups and design changes from engineers and project managers * 3D Modeling & Coordination * Assist with 3D modeling of structural systems for coordination and visualization * Collaborate with engineers, architects, and other drafters to support multidisciplinary coordination * Quality & Documentation * Perform quality checks to ensure accuracy, compliance with company standards, and adherence to applicable codes * Maintain organized documentation and version control of project drawings Qualifications & Requirements * Education * Associates degree or technical diploma in drafting, design technology, or a related field * Experience * 2+ years of experience in structural drafting, preferably in an architectural or engineering firm * Exposure to projects in commercial, healthcare, residential, or institutional sectors * Technical Skills * Proficiency in AutoCAD and/or Revit; experience with BIM workflows is a plus * Familiarity with structural systems including steel, concrete, wood, and masonry * Ability to read and interpret structural and architectural drawings and specifications * Experience with Bluebeam, Navisworks, or other coordination tools * Knowledge of local building codes and construction standards * Soft Skills * Strong attention to detail and commitment to producing high-quality work * Good communication skills and ability to work collaboratively within a team environment Benefits * Competitive salary based on experience * Medical, dental, and vision insurance * 401(k) retirement plan with company matching * Paid vacation, sick leave, and holidays * Professional development support Employment Type: Full time Location: San Diego, CA

Job Description Join Our Team! At Tomarco Contractor Specialties / ISAT Total Support, our employees are thriving both inside and outside the office. Our rapid growth is not only because of what we do, but how we do it. It’s simple: our employees are our greatest asset! We value our team members and create an environment where they feel motivated, supported, and appreciated. We perform at high levels, fueled by a diverse team that brings energy, collaboration, innovation, and pride to every project. We foster a workplace centered around teamwork, quality work, and customer satisfaction. INTRODUCTION: Are you ready to bring your engineering skills to a dynamic and fast-growing organization? Tomarco Contractor Specialties LLP (DBA ISAT Total Support) is seeking a full-time Design Engineer to support our Engineering and Sales teams across multiple branch locations. In this role, you will contribute to high-quality engineering solutions, custom designs, seismic bracing layouts, and client-focused project support. We aim to make the most of your technical ability while giving you opportunities to grow your career as our company continues to expand. COMPENSATION AND BENEFITS:. • Competitive salary based on experience, • Medical, Dental, and Vision coverage, • 401(k) Program with company match, • $100K Life Insurance, • Accelerated growth opportunities, • Exposure to major construction projects, • Nationwide company with multiple branches, • Rewarding, fast-paced work environment, • Inclusive and diverse culture ABOUT US: Tomarco Contractor Specialties, LLP dba ISAT Total Support, is a wholesale distributor in the construction industry with strategic manufacturing partners. Since 1977, ISAT has been a global leader in engineering innovation, fastening systems, seismic bracing, and application-specific construction solutions. We design, manufacture, and distribute non-structural engineering support systems for projects around the world. POSITION OVERVIEW The Design Engineer position supports both the Engineering and Sales teams across ISAT’s nationwide branches. You will be responsible for preparing custom engineering packages, providing technical support, producing accurate drawings, managing project files, and working closely with internal and external partners to deliver exceptional engineering solutions. This role blends engineering design, project coordination, technical communication, and product knowledge. PRIMARY RESPONSIBILITIES • Assist Custom Engineering Lead/Project Manager—will work under the guidance of a Lead Design Engineer who assigns all engineering tasks; may also be assigned directly to a project management team; should be in constant contact with whomever they directly report to, updating them on tasks and letting them know their status at the end of the day., • Custom Engineer – responsible for daily custom engineering packages, which typically include, but are not limited to, one of the following: basic anchor calcs, custom suspended support designs, wall supports, riser supports, and roof-mounted designs., • Billing—must understand our billing tracking software (Nexus) and how to input ALL hours, whether it is for a project, administrative, or personal leave., • Gather Information for Custom Engineering Packages (Basic)—with the assistance of Senior Engineers, must be able to communicate with PMs, sales staff, and even clients to obtain all necessary information regarding the engineering documents needed for your tasks., • Custom Engineer Package Submittals – must be able to build basic custom engineering submittals, including coversheets, back up calcs, and supporting documents., • Detail Drafting – must be able to create accurate details using AutoCAD and/or Revit for all custom engineering packages using the right annotations, scale, and callouts for such things as welds, torque, and correct parts and pieces., • Generate Quotes—Work directly with Salesmen and Branch PM's to help generate scope of work forms and quotations for services., • Seismic Layouts – must have a in depth knowledge of the ISAT manual and rules for laying out standard bracing, including how to create a bracing legend, cover sheet, and correctly annotated layout on projects for all trades, configurations, and for the CBC, IBC, and UFC., • Product Knowledge—Have an in-depth knowledge of what products/parts could be utilized on projects and be able to apply the ISAT line of supported products. Able to create and catalog new applications of support systems and help create better solutions for the future., • Communication—must be able to communicate in all forms of correspondence folders and related to projects associated with; will create transmittals, send follow up emails after coordination meetings, etc.; all related communication needs to be electronically documented in project folders, and CC’d to the Lead., • Project File Management – must have a working knowledge of our file structure and be able to keep all file folders current and organized; must understand where various files need to be put so all personnel have them readily and easily available., • Program Proficiency – must learn the basics of AutoCAD, Revit, Navisworks, Bluebeam, and NEXUS., • Code Knowledge – will acquire a basic knowledge of all codes pertinent to custom engineering, particularly the ASCE-7, IBC, UFC and how they govern seismic engineering., • Organization – must be able to keep a clean and organized work environment., • Performs Other Duties as Assigned—The employee might be asked to perform duties not listed in this job description, but which are also considered to be essential to the employment position., • Bachelor’s degree in Engineering (Mechanical, Civil, Structural, or related field) required, • 4+ years of engineering or design experience preferred (open to entry-level with strong aptitude), • Experience in non-structural seismic applications is a plus, • Proficiency in AutoCAD, Revit, or similar CAD platforms, • Ability to read and interpret construction plans, • Strong communication, organizational, and problem-solving skills, • Ability to manage multiple tasks in a fast-paced environment *Equal Employment Opportunity

Job Description Join our fast-paced and passionate team as the Manager of Configuration and Quality Systems. As we scale our latest high-technology systems, you will be the guardian of our product integrity and the architect of our documentation lifecycle. This is a dynamic, high-visibility role for a process-oriented leader who thrives in a fluid environment and understands that a world-class product requires world-class traceability. You will define the configuration management roadmap, lead the Quality Management System (QMS), and ensure that every iteration of our hardware is documented, validated, and ready for prime time. Your key responsibilities are as follows: • Configuration Management (CM): Establish and lead the Configuration Control Board (CCB). Manage the end-to-end lifecycle of Engineering Change Orders (ECOs), Deviations, and Waivers to prevent "version creep.", • Quality Management System (QMS): Own the development, implementation, and maintenance of the company’s QMS (ISO 9001/AS9100). Serve as the primary point of contact for external audits and certification bodies., • Documentation Control: Oversee the "Master Record." Ensure that all CAD data, Bills of Materials (BOMs), and Manufacturing Process Specifications (MPS) are vaulted, revision-controlled, and accurately reflected in the ERP/PLM systems., • BOM & Traceability: Partner with NPI Engineering to audit complex BOM structures and implement serialized component tracking to ensure 100% "as-built" vs. "as-designed" accuracy., • Continuous Improvement: Lead root cause analysis and corrective action (CAPA) investigations for systemic documentation or process failures, driving a culture of "Right First Time.", • A bachelor’s degree in engineering, Quality Management, or a related technical field, or extensive practical experience., • A minimum of 8 years of experience in a highly regulated manufacturing environment (Aerospace, Semiconductor, or Medical Device)., • Expertise in PLM platforms (e.g., Arena, Windchill, Teamcenter) and their integration with ERP systems (e.g., SAP, Oracle, NetSuite)., • Deep understanding of ASME Y14.35 (Revision of Engineering Drawings) and MIL-STD-973 or similar CM standards., • Demonstrated success in achieving or maintaining AS9100 or ISO 9001 certifications in a startup or growth-stage environment., • Strong quantitative skills for tracking Quality Metrics (Yield, CoPQ, and Audit Findings). The expected annual salary range for this position is $135,000-$180,000 (commensurate with experience). As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job Description Manufacturing Engineer IV (Staff) San Diego, CA Manufacturing Operations Requirements Qualifications BS Degree in Mechanical Engineering, Bioengineering, Chemical Engineering, Manufacturing Engineering, or scientific discipline required Minimum 8-12 years related experience, including years of higher-level education (MS, PhD) Experience in design of experiments and statistical tools (ANOVA, t-test, etc.) Experience with Fishbone, A3, 5Y, and other root cause investigation tools Strong understanding of process interactions (inputs, outputs) that are both technical and system related Expertise with scaling manufacturing processes to commercial volumes Experience with budgeting, cost management, modeling, and preparing business proposals (ROI, NPV) for new initiatives seeking executive approval Strong understanding of FDA 21 CFR Part 820 and ISO 13485 quality and regulatory standards Experience with lean manufacturing and six sigma methodologies (preferred) Experience with design for manufacturability concepts and product development lifecycle (preferred) Experience with standard electrical, mechanical, and wet lab test equipment (preferred) Strong leadership skills, including the ability to set goals, allocate resources to appropriate priorities, and provide constructive feedback to foster positive relationships Proficiency in Microsoft Office tools Proficiency with JMP, Minitab, or equivalent statistical software Experience with ERP, MES, and other manufacturing systems Proficiency in BMRAM or equivalent asset management system Expertise in several specialty skillset, including injection molding, welding, analytical chemistry, microscopy, metrology, adhesives, or electronics packaging Proficiency in Solidworks or equivalent CAD software (preferred) Experience with MS Project, Visio, and other project management tools (preferred) Experience with manufacturing database, controls, and vision (preferred) Experience with Altium or other electronics design software (preferred) Role model for what kindness looks like. Actively levels up those on the team through example setting, guidance, and support. Empowers others to make effective decisions Excels at identifying solutions to accelerate teams learning of the problem space Strong organizational planning and ability to hold others accountable. Breaks down silos within and across teams to ensure forward progress and collective success Ability to take decisive action and deliver tangible results in a cross-functional organization. Leadership aptitude of teams, projects, and programs

Job DescriptionJob Description: Shield AI is seeking a candidate to lead the seamless integration of complex systems into our vehicle's confined spaces. In this high-ownership role, you'll lead the systems layout on the vehicle, collaborating closely with cross-functional teams to optimize size, weight, and cost. This involves managing the product structure, creating diverse zonal configurations, and spearheading iterative design discussions with key stakeholders to deliver a cohesive final product. This is your chance to design at the edge of innovation and autonomy, making a real-world impact. What You'll Do • Lead vehicle systems layout configuration., • Create and manage the product structure., • Drive iterative design discussions with key stakeholders to ensure a cohesive final product., • Manage physical and electrical interfaces across stakeholder teams., • Develop critical tools within NX functions (such as mass rollups & EBOM exports)Required Qualifications, • Bachelor's or Master's degree in Aerospace Engineering or Mechanical Engineering, • Knowledge of aircraft systems (e.g., avionics, flight controls, hydraulics, electrical power distribution, environmental control systems, propulsion)., • Strong CAD skills (NX preferred) with integration experience, • Ability to work independently and as part of a highly collaborative team in a fast-paced environment.Preferred Qualifications, • Experience with UAVs, aircraft, or robotic systems, • Proven experience leading technical integration efforts and collaborating with multidisciplinary teams., • Materials selection inclusive of alloys, heat treatments, allowables, and finishes, • Hands-on machine shop or mechanic experience (professional or hobby)

Job Description Job Overview We are seeking an experienced Senior Aerospace Electrical Engineer with extensive expertise in Unmanned Aerial Vehicles (UAVs) to lead and innovate within our engineering team. The ideal candidate will have a strong background in guidance systems, servo control, rugged design, design assurance, verification testing, and quality control, coupled with proven leadership and mentoring skills. This role demands hands-on technical proficiency and the ability to guide multidisciplinary teams in delivering high-performance electrical systems for aerospace applications. Key Responsibilities • System Design and Innovation: Lead the design and development of advanced electrical systems for UAVs, including guidance systems, servo control mechanisms, and power management solutions, ensuring alignment with mission-critical requirements., • Rugged Design: Oversee the development of durable electrical components and systems engineered to withstand harsh environmental conditions, including extreme temperatures, vibrations, and electromagnetic interference., • Guidance Systems: Direct the integration of sophisticated guidance and navigation systems, incorporating sensors, GPS, and inertial navigation units, to achieve precise and reliable UAV performance., • Servo Control: Spearhead the design and optimization of servo control systems for precise actuation and stabilization of UAV components, such as control surfaces, gimbals, and payloads., • Design Assurance: Establish and enforce design assurance processes to ensure compliance with aerospace standards (e.g., DO-160, DO-254, MIL-STD), driving reliability and safety in all designs., • Verification Testing: Develop and lead comprehensive verification and validation testing strategies, overseeing test execution to confirm system performance, durability, and compliance under simulated and operational conditions., • Quality Leadership: Collaborate with quality assurance teams to define and uphold rigorous quality standards, leading root cause analysis and implementing corrective actions to maintain product excellence., • Hands-On Expertise: Actively participate in prototyping, troubleshooting, and system integration, leveraging hands-on skills to resolve complex technical challenges and validate designs., • Team Leadership and Mentorship: Mentor and guide junior engineers, fostering technical growth and collaboration while leading cross-functional teams to achieve project milestones and objectives., • Education: Bachelor’s degree in Electrical Engineering, Aerospace Engineering, or a related field; Master’s degree strongly preferred., • Experience:, • Minimum of 8 years of experience in aerospace electrical engineering, with at least 5 years focused on UAV systems., • Demonstrated expertise in guidance systems, servo control, ruggedized design, and verification testing., • Proven leadership experience, including managing teams and mentoring engineers., • Technical Skills:, • Advanced proficiency in CAD tools (e.g., Altium Designer, Cadence) for circuit design and PCB layout., • Expertise in embedded systems, microcontrollers, and real-time operating systems., • In-depth knowledge of aerospace standards (e.g., DO-178C, DO-254, MIL-STD-810)., • Proficiency with test equipment, including oscilloscopes, signal analyzers, and environmental test chambers., • Leadership Skills:, • Strong ability to lead and inspire technical teams, manage projects, and drive innovation., • Excellent communication skills to collaborate with stakeholders and present complex technical information clearly., • Proven mentoring skills to develop junior engineers and foster a culture of excellence., • Soft Skills:, • Exceptional problem-solving and analytical skills with a focus on quality and precision., • Extensive experience with UAV flight control systems, autopilot integration, and sensor fusion., • Familiarity with FAA and international certification processes for UAVs., • Background in designing fault-tolerant and redundant systems for high-reliability aerospace applications.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking a Structural Analyst to support the structural analysis and testing of advanced UAVs. In this role, you will work closely with Mechanical, Systems, Propulsion, and Aerospace Engineers to ensure the structural integrity of our lightweight, high-performance aircraft. You will contribute to the design, analysis, testing, and optimization of airframe structures and components, ensuring they meet performance, weight, and safety requirements. This role is ideal for engineers with 7+ years of experience looking to gain expertise in finite element analysis (FEA), composite materials, mechanical testing, and aircraft loads analysis in a fast-paced, high-tech aerospace environment.What you'll do: • Assist in building and refining finite element models (FEM) to evaluate the structural performance of UAV components., • Perform static, modal, fatigue, and vibration analyses to assess stress, deformation, and durability., • Conduct hand calculations to validate FEA results, ensuring accuracy and structural reliability., • Work with design engineers to optimize airframe structures, balancing weight, strength, and manufacturability., • Support the development of test plans for structural validation, including quasi-static, vibration, and shock testing., • Analyze flight telemetry and structural test data to improve modeling accuracy and correlate predictions with real-world performance., • Assist in defining load cases, material properties, and design margins for UAV airframe and mechanical components., • Document and present structural analysis reports and technical recommendations to engineering teams., • Collaborate with cross-functional teams to ensure structural requirements align with system performance goals., • Contribute to the continuous improvement of structural analysis methodologies, tools, and best practices.Required qualifications:, • B.S. in Mechanical Engineering, Aerospace Engineering, or related field., • 7+ years of experience in structural analysis, finite element modeling, or aircraft loads analysis., • Experience with FEA tools (ANSYS, NASTRAN, HyperWorks, or similar)., • Strong ability to perform hand calculations for structural strength, stability, and fatigue analysis., • Knowledge of composite materials and lightweight aerospace structures., • Familiarity with mechanical testing methods (static, vibration, and fatigue)., • Proficiency with data analysis tools (Excel, MATLAB, Python, or similar)., • Strong problem-solving skills, attention to detail, and ability to work in a team environment.Preferred qualifications:, • Master’s degree in Mechanical or Aerospace Engineering., • Experience in aircraft structural design, UAV airframe development, or aerospace testing., • Hands-on experience with structural testing, modal analysis, or composite modeling., • Exposure to CAD software (NX, SolidWorks) and PLM tools (Teamcenter or similar). Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Are you a passionate and innovative product design engineer looking to help develop state of the art AI and aircraft products? Are you eager to make a positive difference in the world? Do you want to work alongside mission driven and values focused teammates? Shield AI is just the place for you! As a Mechanical Engineer, you will be responsible for contributing to the mechanical design and development of Shield AI's autonomous UAV products. You will help architect new products, perform the detailed design of complex electro-mechanical assemblies, and will use best in class design and analysis tools. You will collaborate closely with internal and/or external partners to prototype, test and release products to production. You will also help ensure product features achieve performance, schedule and reliability goals.What you'll do: • Own the design and development of new products and subsystems., • Perform analysis on designs including hand calculations, CAD, and FEA., • Rapidly design, prototype and test to validate the robustness and proper performance of designs., • Lead design reviews., • Participate in engineering and pre-production product builds., • Interface with cross-functional teams to ensure the successful development and launch of new products., • Exemplify technical excellence and be accountable for your work.Required qualifications:, • You have a B.S. degree in Mechanical or Aerospace Engineering, • 2+ year of hands-on experience in design and development of mechanical systems, • CAD modeling experience, • Knowledge of FEA principles, • Exceptional written and verbal communication, • You have a demonstrated record of working hard, being a trustworthy teammate, holding yourself and others to high standards, and being kind to others., • Demonstrated track record of assuming ownership over development processes and features and delivering outstanding outcomes., • Proven track record of successfully shipping products, showcasing the ability to navigate through development cycles, overcome obstacles, and deliver high-quality solutions to meet project deadlines and exceed client expectations in a fast-paced environment. Preferred qualifications:, • M.S. degree in Mechanical Engineering, Aerospace Engineering, or equivalent., • Leadership experience on a project team, • Problem solving skills including root cause investigation, failure analysis, and DOE, • Experience using Siemens NX, • Experience working on cutting-edge autonomous robotic systems, • Proven background in thriving within fast-paced environments, particularly within startup or R&D settings. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:Shield AI is seeking a Senior Staff Structural Design Engineer to lead the development of structural systems for our next-generation autonomous aircraft. As a technical leader within the Mechanical Engineering organization, you will drive architecture, design strategy, and execution for high-performance primary and secondary aircraft structures. You will operate with broad ownership across structural subsystems, influencing technical direction, integration strategy, and validation planning. This role is ideal for an experienced aerospace engineer who combines deep structural expertise with strong cross-functional leadership in fast-moving, mission-driven environments.What you'll do: • Lead the design and development of major structural subsystems across Shield AI’s next-generation UAV platform, including primary load-bearing structures., • Drive structural architecture decisions, load path definition, and layout strategy in partnership with systems, aero, propulsion, and manufacturing teams., • Own the structural design lifecycle from clean-sheet concept through production release, ensuring quality, traceability, and configuration control., • Perform and guide linear and nonlinear structural analysis, fatigue assessments, margin analysis, and design optimization under operational and edge-case loads., • Establish material strategies for composite and metallic structures aligned to performance, manufacturability, cost, and mission durability requirements., • Lead structural validation strategy including test planning, correlation, and design iteration across coupon, subcomponent, and system-level testing., • Facilitate and drive design reviews, risk assessments, and technical decision-making forums related to structural systems., • Partner closely with manufacturing, supply chain, and flight test to ensure seamless transition from engineering development to production and deployment., • Mentor engineers across levels and raise the overall technical bar through design reviews and analysis rigor., • Identify and implement improvements in structural design processes, analysis workflows, and configuration management practices to increase velocity and quality.Required qualifications:, • Bachelor’s or Master’s degree in Mechanical Engineering, Aerospace Engineering, or related discipline., • 9–10+ years of experience in aircraft structural design with ownership of major components or subsystems through development, test, and/or production., • Deep expertise in composite and metallic aircraft structures, including material behavior, joints, load paths, and environmental effects., • Strong proficiency in CAD tools (NX preferred) and FEA tools (ANSYS, Abaqus, NASTRAN, or similar)., • Experience conducting advanced stress analysis, fatigue assessment, and structural optimization., • Strong command of GD&T, tolerance stackups, DFMA, and structural layout best practices., • Demonstrated experience leading cross-functional engineering efforts and influencing technical direction., • Clear, concise technical communication and ability to operate with high autonomy and ownership.Preferred qualifications:, • M.S. degree in Aerospace or Mechanical Engineering., • Experience on Group 3–5 UAV, DoD aircraft, or high-performance aerospace vehicle programs., • Working knowledge of aerospace standards (MIL-STD, ASME Y14.5, FAA FARS) and certification pathways., • Experience in vehicle integration, manufacturing liaison, and production support., • Familiarity with model-based engineering, digital twin development, or advanced configuration management tools. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:Shield AI is seeking an exceptional Electrical Engineer to join the team in building our next-generation autonomous aircraft. Joining now places you at the earliest stages of development, tackling open-ended design challenges that will shape the future of autonomous flight. You will collaborate closely with other Electrical Engineers, Mechanical, Thermal, CAD, Hardware Test, Reliability, Supply Chain, Manufacturing, and other cross-functional teams. This is an opportunity to shape our team processes and own critical aspects of our hardware development.What you'll do: • Own full product and circuit design for flight critical subsystems. This includes analog, digital, high-speed, power, compute, sensors, FPGA, and other functional blocks as needed, • Design for high reliability in challenging environments. Including temperature, altitude, radiation, and vibration, • Full-cycle hardware development: Own the entire flow — concept, modeling, worst case analysis, schematic capture, simulation, prototyping, design reiteration for improving design maturity, testing and validation, • PCB ownership: Drive PCB layout and design with ECAD engineers, optimizing for power density, EMI, thermal, and manufacturability, • Design for Safety, Manufacturability and Reliability: Design robust systems keeping in mind best practices for safety, manufacturing and reliability, • Board Bring Up and Testing: Execute board bring up, verification, validation and HALT testing to meet rigorous aerospace reliability standards, • Cross-functional collaboration: Work closely with Mechanical, CAD, Embedded, Software, Production and various aircraft teams throughout the product lifecycle, • Design review leadership: Lead and contribute to cross-functional reviews ensuring robust, high-integrity engineering decisions, • Program execution: Manage project timelines, deliverables, and technical milestones to drive on-time, high-quality outcomes, • Mentor and lead other engineers supporting your projectRequired qualifications:, • You have a B.S. in Electrical Engineering or equivalent, • You have 5+ years of experience as an Electrical Engineer, • You are experienced with: circuit design, schematic capture, component selection, circuit testing, circuit debugging, and system integration, • You have a demonstrated record of working hard, being a trustworthy teammate, holding yourself and others to high standards, and being kind to others Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Looking for a place to grow your career and make a difference? RICK is the place for you! As a Principal Project Engineer/Manager in San Diego, CA you will have an opportunity to work with a multi-disciplinary team on meaningful, landmark projects in the San Diego, CA area. As a RICK team member, you will help clients and communities turn their dreams into reality. You will learn from and work alongside industry-leading experts and together shape the future of tomorrow. Qualifications Qualified candidate will have a BSCE degree, CA Registration as a Professional Civil Engineer, (or ability to obtain in next 6 months), plus a minimum of eight (8-12) years relevant experience; or the equivalent work experience of twelve (12-15) years in this industry. Candidates for this position must demonstrate: • Independent thought and decision-making abilities, • Must demonstrate strong independent thought and decision-making abilities, • A minimum of three years management experience supervising the work of technical staff required, • Possess demonstrated leadership and supervisory skills, • Demonstrate Project management ability, • Management of construction documents and contracts, • Management of construction support and field coordination, • Management of project schedules and budgets, • Preparation of contracts, fee proposals, and scopes of work, • Significant experience in client and public-agency interactions, • Ability to perform conceptual and preliminary engineering design studies (incorporating land use and zoning considerations, assessment and consideration of site constraints, infrastructure requirements, and potential regulatory issues), • Preparation/processing of regulatory plans, • Preparation/processing of public improvement plans (private and public), • Ability to perform constructability reviews AutoCAD/Civil 3D. CAD experience is required. Additional Skills: • Applies engineering principles, techniques, and procedures for Civil Engineering design, • Possesses working knowledge of business and management principles associated with strategic planning, resource allocation, leadership techniques, production procedures, interview and hiring methods and the coordination of people, • Accepts and carries out responsibility for the design team's direction, control and planning; sets realistic goals and makes decisions independently, • Exhibits a thorough understanding of jurisdictional processing, • Negotiates effectively, • Demonstrates a high level of leadership & management ability; accepts and responds appropriately to constructive feedback with others and applies seasoned time management, • Relates well and maintains a high level of respect and confidence from co-workers, public agencies, • Demonstrates a high level of competence in written and oral communication, • Generous Benefits Package, • Medical, Dental, Vision, Profit Sharing, 401K, and Life and Disability Insurance and Personal Leave RICK Engineering Company is an Equal Opportunity Employer RICK employees are protected by laws designed to protect employees from discrimination based on race, religion, color, sex, pregnancy, gender identity, sexual orientation, parental status, national origin, age, disability, family medical history or genetic information, political affiliation, military service, or any other non-merit-based factor. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, and training and career development programs. RICK employees are also protected against retaliation if they engage in a protected activity, whistleblowing, or the exercise of any appeal or grievance right provided by law.

Job Description If you are looking for a place to grow your career and make a difference – RICK is the place for you! As a Field Survey Manager in San Diego, CA, you will have an opportunity to work with and lead a team on meaningful, landmark projects in the San Diego region. As a RICK team member, you will help internal and external clients and communities turn their dreams into reality. You will learn from and work alongside industry-leading experts and peers. This is a position with opportunities for future growth and advancement. Learn more about our firm by visiting QUALIFICATIONS: • Candidate will have a minimum of ten (10) years of land survey experience, plus an A.S. or bachelors in land surveying or equivalent work experience of twelve (12) years., • Having a California Land Surveyor Registration is a plus or demonstrating the ability to obtain within 180 days of accepting the position will be taken into consideration for wage determination., • The candidate must be able to effectively manage a survey department and demonstrate the ability to lead and oversee its operations., • Candidate for this position must demonstrate strong independent thought, decision-making abilities and the ability to interact well with/lead department staff., • Responsible for developing and maintaining client relationships with owners, developers, agencies, contractors, subcontractors and other departments within the company., • Implement business strategy across the department., • Prepare and oversee proposals, contracts and the financial health for projects., • Demonstrates knowledge, understanding and implementation of federal, state and local jurisdictional laws, policies and procedures as they relate to the land surveying practice., • Demonstrates a high level of understanding of survey control, survey procedures, construction staking and jobsite safety for survey field staff., • Demonstrates a technical expertise at the application of coordinate geometry, CAD and survey calculations together with the gathering and review data for the preparation of topographical maps and design surveys for new and existing construction., • Manage and mentor staff researching, preparing calculation for the performance of boundary surveys, construction staking, and other surveys. RICK employees are protected by laws designed to protect employees from discrimination based on race, religion, color, sex, pregnancy, gender identity, sexual orientation, parental status, national origin, age, disability, family medical history or genetic information, political affiliation, military service, or any other non-merit-based factor. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, and training and career development programs. RICK employees are also protected against retaliation if they engage in a protected activity, whistleblowing, or the exercise of any appeal or grievance right provided by law.

Job Description If you are looking for a place to grow your career and make a difference – RICK is the place for you! As a Field Survey Manager in San Diego, CA, you will have an opportunity to work with and lead a team on meaningful, landmark projects in the San Diego region. As a RICK team member, you will help internal and external clients and communities turn their dreams into reality. You will learn from and work alongside industry-leading experts and peers. This is a position with opportunities for future growth and advancement. Learn more about our firm by visiting QUALIFICATIONS: • Candidate will have a minimum of ten (10) years of land survey experience, plus an A.S. or bachelors in land surveying or equivalent work experience of twelve (12) years., • Having a California Land Surveyor Registration is a plus or demonstrating the ability to obtain within 180 days of accepting the position will be taken into consideration for wage determination., • The candidate must be able to effectively manage a survey department and demonstrate the ability to lead and oversee its operations., • Candidate for this position must demonstrate strong independent thought, decision-making abilities and the ability to interact well with/lead department staff., • Responsible for developing and maintaining client relationships with owners, developers, agencies, contractors, subcontractors and other departments within the company., • Implement business strategy across the department., • Prepare and oversee proposals, contracts and the financial health for projects., • Demonstrates knowledge, understanding and implementation of federal, state and local jurisdictional laws, policies and procedures as they relate to the land surveying practice., • Demonstrates a high level of understanding of survey control, survey procedures, construction staking and jobsite safety for survey field staff., • Demonstrates a technical expertise at the application of coordinate geometry, CAD and survey calculations together with the gathering and review data for the preparation of topographical maps and design surveys for new and existing construction., • Manage and mentor staff researching, preparing calculation for the performance of boundary surveys, construction staking, and other surveys. RICK employees are protected by laws designed to protect employees from discrimination based on race, religion, color, sex, pregnancy, gender identity, sexual orientation, parental status, national origin, age, disability, family medical history or genetic information, political affiliation, military service, or any other non-merit-based factor. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, and training and career development programs. RICK employees are also protected against retaliation if they engage in a protected activity, whistleblowing, or the exercise of any appeal or grievance right provided by law. Company DescriptionRICK is an award-winning, multi-disciplinary planning, design, and engineering firm with a 68-year history of enriching communities throughout the western United States. RICK offers a full range of services from initial planning through concept development, final designs and plans, and implementation.RICK is an award-winning, multi-disciplinary planning, design, and engineering firm with a 68-year history of enriching communities throughout the western United States. RICK offers a full range of services from initial planning through concept development, final designs and plans, and implementation.

Job Description TrellisWare launched in 2000 with an innovative culture striving to push technological boundaries in the area of wireless communications. We are now a worldwide leader in highly advanced algorithms, waveforms, and communications systems that range from small form factor radio products to fully integrated solutions. At TrellisWare, we connect passion with purpose and together we make an impact- on our careers, our company, and the world. And you can too. If you love to innovate and collaborate in a dynamic environment where boundaries are being pushed, you belong at TrellisWare. Where the opportunity to serve is not a challenge but a gift. Where you're never going alone. Because there's too much at stake to go solo. Our people are our primary asset, and we believe that strong, cohesive teams are the key to leveraging brilliant individual contributions to even greater achievements. The Engineering Team is seeking a Mechanical Engineering Manager. You would be responsible for leading a team of Mechanical Engineers as they conceive, develop, produce, and maintain radio products, mechanical solutions for handheld tactical radios, accessories, and other communications equipment through all stages of their lifecycle. This position is responsible for the leadership and management of TrellisWare's internal mechanical engineering team as well as outside design services such as industrial design. It oversees all mechanical engineering activities that guide and support new products through concept, design, production, and end of life. The team's goals include the full lifecycle of mechanical design, Industrial design, rapid prototyping, EMI, and environmental testing. TrellisWare Managers are responsible for building strong, cohesive teams by hiring top-tier talent, developing key skills within their teams, and fostering a culture of ownership and accountability within a positive, supportive, and flexible environment. They inspire execution amongst their teams and role model TrellisWare's core values of delivering excellence, empowering people, and pushing boundaries. The essential duties and responsibilities include: • Provide leadership, mentorship, and expertise to the Mechanical Team., • Take ownership of the mechanical design of radio products and accessories., • Define, derive, and document mechanical system requirements., • Explore feasibility and applicability of new technologies, materials, processes to add to our mechanical design toolkit on both new and existing designs., • Oversee creation and release of fabrication and assembly drawings., • Creates development plans to forecast resource requirements (labor and material) through product release as well as estimation of product unit cost. Actively manages team to drive execution to the plan. Actively maintains plan to reflect actual execution., • Design, document, and execute mechanical engineering development processes., • Oversee creation and release of assembly drawings., • Manage external vendors, including industrial design firms, rapid prototype vendors, and full production vendors., • Provide functional management to the mechanical engineering team., • Provide coaching and mentoring to junior team-members., • Plan and execute conceptual and detailed development efforts., • Define and develop current and future competencies required by team members in order to maintain TrellisWare's competitive advantage and build individual and organizational capabilities., • Develops and implements strategies for cross-team and cross-department communication., • Inspire execution according to TrellisWare values (delivering excellence, empowering people and pushing boundaries)., • Support TrellisWare development processes and continuously improve them., • Establishes group mission and goals that are aligned with organizational vision, mission, values, and strategy., • Hires, engages, and retains the best people., • Clarifies goals and expectations for teams performance (removes obstacles and provides necessary resources and feedback) in order to achieve agreed targets and results, and synergistically supports departmental success., • Defines and develops current and future competencies required by team members in order to maintain our competitive advantage and build individual and organizational capabilities., • Develops relationships with team members built on trust and respect., • Bachelor's degree in mechanical engineering or related field of study required. Master's degree a plus., • At least 10 years of applicable product development and manufacturing engineering experience for high technology electronics/communication products., • Experience designing portable, rugged devices that require balance between ruggedness, size/weight, and recurring cost. Experience with radios and/or DoD is a plus., • Understand various material (metal, plastic), fabrication processes (CNC machining, casting, molding, injection etc) and their cost/performance tradeoffs, • Experience with electro-mechanical design considerations., • Experience interfacing with Industrial Designers is a requirement. Personal Industrial Design skills are a plus., • Ability to manage external vendors, including industrial design firms, rapid prototype vendors, and full production vendors., • Understand low volume, medium volume, and high-volume product design considerations., • Design for manufacturing/Concurrent Engineering experiences., • Experience in using Solidworks and/or other 3D CAD software., • Expertise in thermal modeling and thermal design considerations., • Ability to foster a culture of hard work, trust, and respect that is consistent with company values., • Ability to renegotiate team commitments and manage customer expectations as priorities change., • Sound business acumen and advocate for continuous improvement of processes and procedures., • Strong interpersonal skills and emotional intelligence., • Ability to mentor and coach junior employees in professional development and process improvement., • Ability to evaluate performance against defined goals and effectively communicate areas of growth/improvement for direct reports., • Strong analytical and problem-solving skills., • Effective execution and decision making., • Champion of change and promotes innovation., • Able to frequently sit, stand, walk, use hands to fingers, handle or feel, reach within hands and arm's length, stoop, kneel, and crouch, talk and hear., • Regularly required to sit for extended periods of time; frequently required to use office equipment such as PC, printer, telephone, etc., • Able to regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Disclaimer - The above statements are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Nothing in the job description restricts the company's right to change, assign, or reassign duties and responsibilities at any time for any reason. TrellisWare Technologies pays competitively according to the market in an individual's geographic location, in addition to their qualifications and experience. The posted range is annually and for individuals located in the San Diego, CA area. San Diego, California Pay Range$180,000—$210,000 USD Check out the Careers page for more information about working at TrellisWare Technologies.

Job Description Essel is looking for a Mid to Senior Level Solid Waste Engineer to manage and work on diverse solid waste projects. In this role you will help manage projects, developing proposals and will also be directly involved with public and private clients in marketing, client management, and project production. Responsibilities include project management, business development, and staff development. Project responsibility will have a primary focus on solid waste management, including landfill gas, landfills and landfill infrastructure, composting, and other projects, which may require design, engineering, permitting, construction and/or operations support. You can be hybrid out of our San Diego, Long Beach, Pleasanton, or Sacramento office. Remote work might also be considered if you live in California. • Apply intensive and diversified knowledge of engineering and scientific principles and practices in solid waste assignment areas and related fields., • Prepare engineering calculations, drawings, reports, and permit applications., • Make decisions independently on engineering or scientific problems and methods, plans and coordinate work, and represent us at meetings and conferences., • Field work performed by high/driving in varied terrain and weather will be required, including but not limited to, surveys/data gathering, CQA liner installations, inspections, etc., • Office-based tasks including: CAD drafting, mathematical calculations, report writing, creating site plans and facility diagrams, and permit applications., • Business development including: proposal preparation, meeting with clients, and attending industry-related conferences/trade shows., • Bachelor’s degree in relevant engineering field required., • Minimum of 6 years of relevant working knowledge/demonstrated consulting experience with projects specific to the solid waste industry, including:, • Landfill gas management, air compliance, and landfill design and permitting is required., • E.I.T. required and California P.E (civil) registration or ability to obtain within 6 months preferred., • Medical, dental, vision, 401K, and employer-funded Employee Stock Ownership Plan (ESOP), • Student Debt Employer Contribution Program, • Paid holidays and PTO

Job Description Natilus is building the next generation of aviation through the development of blended-wing-body aircraft, delivering a step-change in overall efficiency. Our growing family of aircraft is designed to make air travel more sustainable while fundamentally improving the economics of commercial flight and the operational effectiveness of defense logistics. By combining advanced aerodynamics with innovative design, Natilus aircraft achieve exceptional fuel efficiency, increased payload capacity, and seamless compatibility with existing airport infrastructure. With hundreds of aircraft valued in the billions of dollars already on order, we are redefining how aircraft are designed, built, and operated, representing a meaningful evolution in modern aviation Work Summary: Natilus is seeking a Structures Designer to join our team in San Diego, CA. In this role, you will be responsible for CAD-based structural design, model management, drafting standards development, and coordination with manufacturing. You will work across composite and metallic structures while contributing to CAD process optimization to support efficient, high-quality model development Main Responsibilities: • Leading company CAD efforts, • Design and develop composite and metallic primary and secondary structures, • Model management, • Drafting standards development, • Coordinate with manufacturing, • CAD process development, • Minimum of 7 years of experience as a Structures designer or in a closely related role, • Strong foundational understanding of aircraft load paths and structural behavior, • Strong foundational understanding of parametric CAD model development and management, • Experience designing bolted and bonded joints, • Expert-level knowledge of composite structures, including detailed design and fabrication methods, • Proficiency with NX, CATIA, or SolidWorks, • Experience with rapid prototype aircraft structures from conceptual and preliminary design through build, • Hands-on experience with design-for-build manufacturing, determinate assembly, manufacturing planning, and tooling design Desired Experience: • Kickoff through production program experience, • Rapid prototype program experience, • Hands-on composite build experience Core Behaviors: • Build trust through ownership, transparency, and follow-through, • Communicates clearly, directly, and respectfully across teams, • Lead by example and model expected behaviors, • Ability to give and receive direct, constructive feedback, • Comfortable operating in a fast-paced, collaborative environment with evolving priorities Travel Requirements: Occasional travel and on-site work at the local hangar may be required Benefits Health Care Plan (Medica, Dental, Vision) Retirement Plan – 401k Unlimited PTO Onsite Gym Access Natilus Inc. hires solely based on qualifications, merit and competence. Natilus Inc. is an equal opportunity employer. Natilus Inc. does not hire on the basis of race, color, religion, gender, national origin/ ethnicity, veteran status, disability status, age, sexual orientation, marital status, mental or physical disability or any other legally protected status. Please note: Recruiters will never ask for sensitive personal or financial information during the application phase

Job Description Summary We are currently seeking a Structural Drafter to join our growing team. This role is key in translating structural engineering concepts into precise, detailed drawings that guide construction. The ideal candidate is skilled in computer-aided design (CAD) and/or BIM software, detail-oriented, and experienced in structural drafting across a variety of building types. Duties & Responsibilities * Drawing & Drafting * Prepare detailed structural drawings and plans using AutoCAD, Revit, or similar software, under the supervision of structural engineers * Draft construction documents including foundations, framing, floor plans, sections, and details * Update and revise drawings based on markups and design changes from engineers and project managers * 3D Modeling & Coordination * Assist with 3D modeling of structural systems for coordination and visualization * Collaborate with engineers, architects, and other drafters to support multidisciplinary coordination * Quality & Documentation * Perform quality checks to ensure accuracy, compliance with company standards, and adherence to applicable codes * Maintain organized documentation and version control of project drawings Qualifications & Requirements * Education * Associate’s degree or technical diploma in drafting, design technology, or a related field * Experience * 2+ years of experience in structural drafting, preferably in an architectural or engineering firm * Exposure to projects in commercial, healthcare, residential, or institutional sectors * Technical Skills * Proficiency in AutoCAD and/or Revit; experience with BIM workflows is a plus * Familiarity with structural systems including steel, concrete, wood, and masonry * Ability to read and interpret structural and architectural drawings and specifications * Experience with Bluebeam, Navisworks, or other coordination tools * Knowledge of local building codes and construction standards * Soft Skills * Strong attention to detail and commitment to producing high-quality work * Good communication skills and ability to work collaboratively within a team environment Benefits * Competitive salary based on experience * Medical, dental, and vision insurance * 401(k) retirement plan with company matching * Paid vacation, sick leave, and holidays * Professional development support

Job DescriptionCompany Description At Coffman Engineers, we serve as both prime consultant and sub consultant on projects large and small, including commercial, retail, institutional, government, industrial, and project/construction management. Incorporated in 1979, we have employees in more than 24 locations serving clients across the United States and overseas. To meet client objectives and to integrate our many disciplines, we can create teams comprised of civil, structural, mechanical, electrical, fire protection, and corrosion control, as well as project/construction managers and professionals in a variety of specialty services. This ability has made us a leader in the engineering and construction communities, and has strengthened our reputation as being progressive, innovative, and a great place to work. Job Description The right team is more than an advantage — it’s a game changer! Join a group of engineering professionals dedicated to excellence at Coffman Engineers’ San Diego office, supporting multidisciplinary teams across our organization. We are looking for a Senior Civil Engineering Designer who brings strong technical civil design capabilities and a passion for elevating civil workflows across a wide range of markets. Beyond delivering high-quality project work, the successful candidate will play a key role in advancing our civil CAD standards, enhancing multidisciplinary collaboration, and improving how we deliver work companywide. You’ll be part of a supportive, collaborative engineering culture with opportunities to influence the future of our CAD strategy, mentor emerging designers, and make a lasting impact on civil design excellence. About the Role This position blends project-focused civil design with corporate-level civil CAD leadership opportunities. You will contribute directly to multidiscipline engineering projects—from planning through construction—while also offering guidance on CAD standards, tools, training, and coordination across civil teams nationwide in collaboration with our Corporate CAD Task Force. Coffman’s Corporate CAD Task Force leads our CAD/BIM initiatives and helps elevate consistency, efficiency, and quality in deliverables. Key Responsibilities Civil Design (Project Work) • Produce high-quality civil site design drawings, exhibits, and deliverables for a range of site development projects., • Develop grading, drainage, utilities, alignments, profiles, pipe networks, and other Civil 3D‑based design elements., • Work in multi-disciplinary engineering and design teams to produce and align civil design components within multi-discipline design packages., • Serve as Subject Matter Expert for Civil design programs and best practices., • Coordinate with other discipline leads (Structural, Mechanical, Electrical, Fire Protection) to support Coffman CAD initiatives., • Review and contribute to the development and rollout of corporate CAD standards, templates, and folder organization., • Support Task Force initiative areas such as:, • AutoCAD folder organization and maintenance, • AutoCAD, Revit, & Civil 3D templates, • CAD/BIM project leadership frameworks, • Enhancing the drafter/designer/engineer workflow, • Engage with civil design staff across multiple Coffman offices., • Provide mentorship and input as we recruit, develop, and retain strong drafter/designer talent.Qualifications, • Graduation from a certified CAD training program or AA degree in CAD or related field., • Autodesk Certified Professional preferred., • 8+ years of civil drafting/design experience., • Advanced proficiency in AutoCAD and AutoCAD Civil 3D, including surfaces, alignments, pipe networks, corridors, and profiles., • Strong communication and coordination skills. This position is not eligible for sponsorship. Additional Information Coffman Engineers is a company that truly focuses on its employees. We support and encourage individually tailored professional and technical advancement as well as personal growth. We offer an excellent salary/benefits package, a desirable location, and a professional office environment with the opportunity to work with a collaborative team. Our offices provide several engineering discipline services, which work together collaboratively to provide complete engineering design packages. Coffman offers a flexible schedule and this position may be eligible for PTO, a fun office environment with a high-performing team and a fully stocked kitchen! We welcome the dedicated and the driven. Join us. Don't take our word for it. Check out what others are saying: Coffman at a Glance: • 46 years in business, • 850+ employees serving clients throughout the U.S. and overseas from more than 23 locations, • Multi-discipline engineering services plus corrosion control, commissioning and project/construction management, • Zweig Group Hot Firm List, Zweig Group, 2021, • Top 500 Design Firms, Engineering News-Record, 2022, • Top Workplace (Small), The San Diego Union-Tribune, 2020, 2021, 2022, 2023, 2024, • Best Places to Work (Large), San Diego Business Journal, 2021, 2022, 2023, 2024, 2025 You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know and we will provide reasonable accommodation. If you are experiencing problems applying through our system, please try using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly. This position is direct with Coffman Engineers - we are an Equal Opportunity Employer. We do not discriminate on the basis of any status protected under federal, state, or local law. Follow us! Twitter: @CoffmanEngineer Instagram: @CoffmanEngineers LinkedIn: Facebook: @CoffmanEngineers

Job Description Qualified candidates will have a BSCE degree, California Registration as a Professional Civil Engineer (Preferred but not required), plus a minimum of ten (8) years of relevant experience in land development and/or public works (required); or the equivalent work experience of twelve (10) years in the industry. Qualified candidates will also have a minimum of eight (6) years of management experience supervising the work of engineers, designers, and other project support staff. Candidates for this position must demonstrate: • Strong independent thought and decision-making abilities, • Possess demonstrated leadership and supervisory skills, • Exhibit management ability, • Supervision of engineering design teams, • Management of project schedules and budgets, • Preparation and management of contracts, fee proposals, and scopes of work; significant experience in client and preparation of contracts, fee proposals, and scopes of work, • Site assessment, the ability to perform engineering design studies (incorporating infrastructure requirements, and potential regulatory issues), • Preparation/processing of regulatory plans, • Preparation/processing of public improvement plans in support of public agencies and capital improvement projects, • Preparation/processing of plans to support land development projects, • Expert in preparation/processing of plans through Los Angeles and Ventura County Public Works., • Ability to perform constructability reviews, • Experience with a range of construction support services, • Applies engineering principles, techniques, and procedures to design, • Possesses working knowledge of business and management principles associated with strategic planning, resource allocation, leadership techniques, production procedures, interview and hiring methods and the coordination of people, • Accepts and carries out responsibility for the design team's direction, control and planning; sets realistic goals and makes plans independently, • Exhibits a thorough understanding of jurisdictional processing, • Negotiate effectively, • Demonstrates a high level of leadership & management ability; accepts and responds appropriately to constructive feedback with others and applies seasoned time management, • Relates well and maintains a high level of respect and confidence from co-workers to public agencies, • Demonstrates a high level of competence in written and oral communication, • Possesses knowledge of CAD and its capabilities for preparing exhibits, studies and/or final plans

Job Description Hazen and Sawyer is seeking a CAD/BIM Designer to work alongside project managers and engineers to produce structural BIM (Revit) models, families, and contract drawings for the structural discipline. The ideal candidate will be proficient in the use of Autodesk Revit with experience in the creation of models, families and contract drawings. The candidate will have experience leading the model and contract drawing development effort for projects, including performing interdisciplinary clash detection and the reconciliation of conflicts as well as ensuring that standards are adhered to. AutoCAD/Civil 3D proficiency would be of benefit. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Developing Revit models, families, and contract documents, • Coordinating contract drawing development with multiple disciplines, • Performing BIM model clash detection and working with various disciplines to resolve conflicts, • Training/mentoring less experienced designers, • Reviewing models and drawings for less experienced designers, • Relevant bachelor’s degree and 6 to 10 years of experience — or an associate degree/technical certification and 6 to 10 years of experience., • Proficiency in Autodesk Revit, • Proficiency in AutoCAD/Civil 3D would be a benefit, • Experience leading and coordinating drawing production for medium and large sized projects. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Process Development Engineer IV (Staff) San Diego, CA Qualifications BS Degree in Mechanical Engineering, Bioengineering, Chemical Engineering, Manufacturing Engineering, or scientific discipline required Minimum 8-12 years related experience, including years of higher-level education (MS, PhD) Experience in design of experiments and statistical tools (ANOVA, t-test, etc.) Experience with Fishbone, A3, 5Y, and other root cause investigation tools Strong understanding of process interactions (inputs, outputs) that are both technical and system related Expertise with scaling manufacturing processes to commercial volumes Experience with budgeting, cost management, modeling, and preparing business proposals (ROI, NPV) for new initiatives seeking executive approval Strong understanding of FDA 21 CFR Part 820 and ISO 13485 quality and regulatory standards Experience with lean manufacturing and six sigma methodologies (preferred) Experience with design for manufacturability concepts and product development lifecycle (preferred) Experience with standard electrical, mechanical, and wet lab test equipment (preferred) Strong leadership skills, including the ability to set goals, allocate resources to appropriate priorities, and provide constructive feedback to foster positive relationships Proficiency in Microsoft Office tools Proficiency with JMP, Minitab, or equivalent statistical software Experience with ERP, MES, and other manufacturing systems Proficiency in BMRAM or equivalent asset management system Expertise in several specialty skillset, including injection molding, welding, analytical chemistry, microscopy, metrology, adhesives, or electronics packaging Proficiency in Solidworks or equivalent CAD software (preferred) Experience with MS Project, Visio, and other project management tools (preferred) Experience with manufacturing database, controls, and vision (preferred) Experience with Altium or other electronics design software (preferred) Role model for what kindness looks like. Actively levels up those on the team through example setting, guidance, and support. Empowers others to make effective decisions Excels at identifying solutions to accelerate teams learning of the problem space Strong organizational planning and ability to hold others accountable. Breaks down silos within and across teams to ensure forward progress and collective success Ability to take decisive action and deliver tangible results in a cross-functional organization. Leadership aptitude of teams, projects, and programs

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking a Principal Structural Analyst to provide technical leadership for the structural analysis and validation of advanced UAV platforms. In this role, you will serve as a subject-matter expert for airframe structures, guiding analysis strategy, mentoring engineers, and ensuring structural integrity across the full aircraft lifecycle—from concept through flight test and production. This role is ideal for engineers with 15+ years of experience who have led complex aerospace programs and are comfortable owning structural analysis direction, influencing design tradeoffs, and partnering closely with program and engineering leadership.What you'll do: • Lead structural analysis strategy for UAV airframes, major substructures, and critical components., • Define and review finite element modeling approaches, assumptions, load cases, and margins., • Perform and oversee static, modal, fatigue, vibration, and damage-tolerance analyses., • Establish best practices for hand calculations, correlation methods, and model validation., • Drive structural optimization across performance, weight, cost, and manufacturability., • Own structural test strategy, including defining requirements, overseeing execution, and correlating results to analysis., • Review and approve structural analysis deliverables, test reports, and certification artifacts., • Mentor and technically guide senior and early-career structural analysts., • Partner with cross-functional leads to balance structural requirements with system-level performance goals., • Influence long-term architecture, materials selection, and structural design standards.Required qualifications:, • B.S. in Mechanical Engineering, Aerospace Engineering, or related field., • 12+ years of experience in structural analysis, aircraft structures, or aerospace systems., • Deep expertise with FEA tools (ANSYS, NASTRAN, HyperWorks, or similar)., • Advanced proficiency in hand calculations for strength, stability, fatigue, and damage tolerance., • Extensive experience with composite and lightweight aerospace structures., • Strong background in structural testing, correlation, and certification support., • Ability to operate as a technical authority and make high-impact engineering tradeoffs., • Excellent communication skills and experience presenting to senior technical leadership.Preferred qualifications:, • Master’s or Ph.D. in Mechanical or Aerospace Engineering., • Prior experience as a technical lead or subject-matter expert on aircraft or UAV programs., • Hands-on involvement in flight test support and structural certification efforts., • Experience defining organizational analysis standards and methodologies. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Join our fast-paced and passionate team as a Robotics Process Engineer 4. As we scale, you will be instrumental in building our foundation from the ground up. This is a dynamic, hands-on role for a self-starter who thrives in a fluid startup environment. You'll have the opportunity to work on cutting edge technologies, work closely with leadership, and develop and implement engineering practices that support our mission and growth. Your key responsibilities are as follows: • Work independently and in a team while over-communicating with the manager and the teammates. Will mentor junior engineers., • Execute complex engineering tasks involving planning, preparation, data/information collection and analysis and decision-making in a process involving peer reviews and documentation of the results., • Use tenacity, patience, self-discipline and passion for excellence to assure accuracy of execution schedule, data quality/integrity, conformance to company best practices, clarity in communication and documentation., • Use every opportunity to grow competency through mentorship, curiosity, communication, exposure and initiative, • Drive innovation in modeling, design, analysis, and alignment methods to support product roadmap., • Perform alignment system architecture trade studies with complex and interdependent performance requirements., • Support business development with architecture concepts, feasibility analysis, and white paper writing, • A bachelor’s degree in mechanical engineering, Physics, or a related field, • Demonstrated successful execution of engineering tasks including use of mechanical CAD and quantitative analysis/programming tools, instrumentation and measurement, part fabrication or procurement, integration and test, data collection, analysis and documentation., • Demonstrated successful execution of automated test or component alignment using robotics, machine vision, or electrical test equipment for photonics alignment., • You're creative, flexible, and eager to wear multiple hats. The expected annual salary range for this position is $165,000-$225,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job Description Join our fast-paced and passionate team as a Robotics Process Engineer 4. As we scale, you will be instrumental in building our foundation from the ground up. This is a dynamic, hands-on role for a self-starter who thrives in a fluid startup environment. You'll have the opportunity to work on cutting edge technologies, work closely with leadership, and develop and implement engineering practices that support our mission and growth. Your key responsibilities are as follows: • Work independently and in a team while over-communicating with the manager and the teammates. Will mentor junior engineers., • Execute complex engineering tasks involving planning, preparation, data/information collection and analysis and decision-making in a process involving peer reviews and documentation of the results., • Use tenacity, patience, self-discipline and passion for excellence to assure accuracy of execution schedule, data quality/integrity, conformance to company best practices, clarity in communication and documentation., • Use every opportunity to grow competency through mentorship, curiosity, communication, exposure and initiative, • Drive innovation in modeling, design, analysis, and alignment methods to support product roadmap., • Perform alignment system architecture trade studies with complex and interdependent performance requirements, • Support business development with architecture concepts, feasibility analysis, and white paper writing., • A bachelor’s degree in mechanical engineering, Physics, or a related field, • Demonstrated successful execution of engineering tasks including use of mechanical CAD and quantitative analysis/programming tools, instrumentation and measurement, part fabrication or procurement, integration and test, data collection, analysis and documentation., • You're creative, flexible, and eager to wear multiple hats. The expected annual salary range for this position is $150,000-$200,000. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description: Shield AI is seeking a Senior Structural Analyst to support the structural analysis and testing of advanced UAVs. In this role, you will contribute to the analysis, validation, and optimization of lightweight, high-performance aircraft structures while working closely with Mechanical, Systems, Propulsion, and Aerospace Engineers. This role is ideal for engineers with 5+ years of experience who have a strong foundation in structural analysis and are looking to deepen their expertise in finite element analysis (FEA), composite materials, mechanical testing, and aircraft loads in a fast-paced aerospace environment.What you'll do: • Build and refine finite element models (FEM) to evaluate structural performance of UAV components and subassemblies., • Perform static, modal, fatigue, and vibration analyses to assess stress, deformation, and durability., • Conduct hand calculations to validate FEA results and support design decisions., • Partner with design engineers to optimize structures for weight, strength, and manufacturability., • Support development and execution of structural test plans, including quasi-static, vibration, and shock testing., • Analyze structural test data and flight telemetry to correlate analysis predictions with real-world performance., • Assist in defining load cases, material properties, and design margins., • Prepare and present structural analysis reports to cross-functional engineering teams., • Contribute to improving analysis workflows, tools, and documentation.Required qualifications:, • B.S. in Mechanical Engineering, Aerospace Engineering, or related field., • 5+ years of experience in structural analysis, FEA, or aerospace structures., • Experience with FEA tools (ANSYS, NASTRAN, HyperWorks, or similar)., • Strong hand-calculation skills for strength, stability, and fatigue., • Working knowledge of composite materials and lightweight structures., • Familiarity with structural testing methods., • Proficiency with data analysis tools (Excel, MATLAB, Python, or similar)., • Strong communication skills and ability to collaborate in a team-based environment.Preferred qualifications:, • Master’s degree in Mechanical or Aerospace Engineering., • Experience with UAVs, aircraft structures, or aerospace testing programs., • Exposure to CAD (NX, SolidWorks) and PLM tools. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Laboratory Manager Engineering San Diego, CA Requirements At least 12 years experience as a technician supporting engineering activities. Highly motivated self-learner with a positive attitude. Organized and detail-oriented disposition. Ability to interface with a wide range of people and work in a fast-paced, multi-disciplinary environment. Hands-on experience with CAD software, electrical and mechanical tools and test equipment. Experience with electromechanical fixture design, development and validation. Strong experience with reflow soldering, especially applied to ICs and surface-mount components. Experience testing products and generating test reports. Strong written and verbal communication skills. Experience using Microsoft Word, PowerPoint, and Excel. Comfortable running test scripts on Windows command line. Experience with Altium Schematic & PCB design tools. Experience with SolidWorks. Associates or other technical degree preferred.

Job DescriptionSummary Our client, a top notch mechanical contractor, is currently seeking an experienced Plumbing Estimator for their San Diego, CA location. Backed by the strength and stability that comes with almost a century of customer care and ownership, they adhere to the highest safety standards for its employees and clients. They offer industry-leading building information modeling (BIM) capabilities, design/build services, sustainable solutions, commercial HVAC services, and complex mechanical and industrial system installations. Plumbing estimator is responsible for all phases of the estimating and bidding process including preconstruction services and performing estimate takeoffs. Thorough knowledge of the mechanical construction bidding processes is required. Specific expertise with Plumbing systems serving hotels, student housing, laboratories, power plants, Cogeneration facilities, manufacturing facilities, clean rooms, cGMP facilities and process systems for Pharmaceutical and microelectronics facilities is desired. Ability to produce a complete detailed estimate from incomplete design documents is preferred. Duties And Responsibilities Bid document review, pre-bid meetings, client interface, quantity takeoff, material, equipment and subcontractor pricing, spreadsheet input and proposal preparation. Estimates will be prepared using Quote Express estimating software. Experience with Quote Express or other on-screen estimating software is desired. Duties also include on site and/or In-house estimating where candidate will work with professionals in design firms on design-assist and design-build projects to direct the design to meet the budget. Estimator will also interface with construction project teams and CAD detailing staff. Must have knowledge regarding safety, workers compensation, insurance and bonding, materials as it pertains to bidding requirements. Other duties may be assigned. Qualifications Computer Skills Proficient in MS Word, MS Excel, Bluebeam, Internet, Lotus Notes, and QuoteExpress windows-based piping and sheet metal estimating systems. Required Attributes Must possess excellent written and verbal communications skills.Maintain a professional manner in actions and appearance when representing the organization.Must prioritize in a fast paced multi-task environment with organization skills.Must have demonstrated ability to perform basic business mathematical functions.Must work with minimal supervision.Must effectively manage time and details.Must interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Must have organizational skills in handling & archiving technical data.Must comply with all operating policies, procedures, plans, and programs. Prefer a minimum of 3-5 years mechanical construction experience and proficiency in the preparation of large and complex bid proposals of all types. Language Skills Must have the demonstrated ability to effectively communicate, cooperate, and collaborate with multiple levels of employees, vendors, and suppliers. Employment Type: Full time Location: San Diego, CA