Trabajos class b cdl en Dallas, Texas - Page 3Crear alertas

Job Description Beast Mode Truckin seeks experienced Class A OTR drivers and recent CDL graduates for over‑the‑road runs excluding the Northeast regional. Drivers will operate predominantly refrigerated (reefer) equipment with occasional dry‑van freight. The role offers competitive pay, full benefits, paid orientation, and a predictable home time schedule. Key responsibilities: • Operate Class A commercial vehicles safely and in compliance with federal, state, and company regulations., • Transport refrigerated and dry freight over long‑haul routes (OTR, excluding the Northeast regional)., • Perform pre‑ and post‑trip inspections and basic vehicle care; report maintenance needs promptly., • Maintain accurate logs and paperwork consistent with Hours of Service (HOS) and company policy., • Protect cargo integrity and follow securement procedures for temperature‑sensitive loads., • Average weekly pay: approximately $1,400–$1,500 (varies by experience and miles)., • Base pay per mile: $0.45–$0.55, depending on experience; paid weekly., • Full benefits package including medical, HSA, dental, life insurance, AD&D, paid time off, and 401(k)., • 3‑day paid orientation at the nearest terminal., • OTR schedules with home approximately every 2–3 weeks, typically allowing 2–3 full days at home per cycle., • Age 21 or older with a valid Class A CDL., • At least 3 months of OTR, regional, or local driving experience in the last 12 months, or completion of a recognized CDL training program and acceptance into the company’s mentor program., • Hazmat endorsement required; must be obtained within 90 days of hire if not already held., • No more than two moving violations in the last three years., • No DOT recordable preventable accidents in the last five years., • No major moving violations (e.g., 15+ mph over limit, reckless driving, following too closely) in the last 12 months., • Must never have failed or refused a DOT drug or alcohol test; drivers requiring SAP certification are not eligible., • Valid DOT medical card with at least 75 days remaining at the time of orientation., • Emphasis on safety, professionalism, and reliable on‑time delivery., • Position is suitable for drivers seeking consistent OTR work, competitive compensation, and comprehensive benefits., • Background checks and pre‑employment drug screening (urine and/or hair) will be conducted in accordance with company policy.

Job Description Company Info Circular Services, the largest privately held recycling and organics provider in the U.S., strengthens this mission through its national scale and long-term municipal partnerships. It operates over 25 facilities serving major long-term municipal and commercial contracts. The mission of Circular Services is to keep valuable materials in circulation and minimize the cost and environmental impact of landfills. The company services municipal contracts with some of the largest and fastest growing cities in the U.S. including New York City, Austin, San Antonio, and Phoenix. About the Role: The Class B FEL Driver operates a truck that collects and transports recyclable materials to and from specified destinations. Responsibilities: Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. • Operates a Front-End Load (FEL) commercial recycling collection truck and ancillary equipment on assigned route/s to commercial container customers, while providing excellent customer service, • Deliver recyclables to designated recycling/drop-off facility, • Load recyclables using automated FEL to service 2 yard to 8-yard commercial containers, • Properly operates joystick to control front loading arms and forks to connect to container, watching for unintended contact with obstructions around the FEL container, • Safely raise the container to unload into the truck hopper, makes sure adequate overhead clearance ensures no contact with structures, power lines, date lines or trees that may cause damage or injury, • Practice proper backing procedures after servicing the container using cameras making sure back up alarms are working properly, • Prepares, receives, and provides appropriate documentation for the delivery and pickup of containers to ensure timely service, • Loads, secures, and unloads truck and follows all safety procedures at recycling facility, • Maintains radio or telephone communications with dispatcher and supervisor to receive instructions or notice of changes concerning deliveries or pickups, • Complies with all mandatory safety meetings & briefings, operational standards & policies, and maintains a valid Texas CDL and DOT medical card, • Maintains route sheets, completes pre-trip/post trip inspections and reports vehicle inspection records, and follows all federal and state DOT regulations daily, • Maintains route quality safety and service standards, • Maintains clean vehicle interior and exterior, • Communicates vehicle mechanical problems immediately, • Operates truck and equipment using prescribed techniques to eliminate Driver induced mechanical failures, • Responsible for completing daily pre & post trip inspections, • At least 3 years of satisfactory driving experience of Class A or B vehicles preferred, • Excellent communication skills and ability to deal professionally with customers, dispatchers, mechanics, and other drivers, • Ability to perform simple mathematical calculations, • Excellent driving skills, • Computer Skills: Basic use of Tablets and Applications, • Pass drug screen and criminal background check, • Successfully complete and pass a written and road test, • Must be at least 18 years of age, • Legally eligible to work in the United States., • Ability to perform physical requirements of the position with or without reasonable accommodation The physical demands described here are representative of those which must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the Must be able to pass a DOT physical • Must be able to climb into and out of truck several times per day using three points of contact, • Must be able to sit for extended periods as well as walk for short periods, • Must be able to bend, stoop, crawl, and squat to perform a full inspection of the underside of the truck and inspect tires for adequate inflation and potential damage, • Must be able to work outside for short periods of time in all types of weather, • Must be able to see and hear proficiently to operate a commercial motor vehicle in a safe manner Benefits: • Paid Parental Leave, • Health insurance, • Dental insurance, • Vision insurance, • HSA/ FSA, • Paid time off, • Employee Assistance Program, • 401k matching, • Tuition Reimbursement EEOC: Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics.

Job Description Are you an experienced Grapple Truck operator with a Class A or B CDL looking for an exciting opportunity to work outdoors and travel around the state of Texas? National Salvage is on the hunt for experienced professionals like you to join our team. In this role, you’ll take the wheel of our rear-mounted Grapples. If you’re someone who thrives in the open air and takes pride in getting the job done right the first time, this is the career move you’ve been waiting for. At National, safety, precision, and results are at the core of everything we do. To succeed in this role, you must have hands-on experience operating a knuckle boom, log loader, or grapple with a Class A or B CDL. Enjoy the stability of a Monday - Friday schedule with daytime hours, all while contributing to projects that make a difference. DUTIES, TASKS, AND RESPONSIBILITIES: • Picking up powerline poles using a rear mounted log loader boom, • Loading trucks or rail cars in a fast-paced environment, • Operating a chainsaw, • Removing debris at sites using log loader boom, • Able to work long hours, overtime, and possible weekends in various weather conditions, • Filling out daily paperwork, • Ability to use a smartphone, GPS, and Electronic Logging Device POSITION-SPECIFIC COMPETENCIES: • Able to work long hours, in all weather conditions, • Hold valid driver’s license, a CDL CLASS A or B is required, • Must be able to lift 25 pounds, • Follow all Safety Program, Policies and Procedures, • Completely and accurately fill out daily paperwork, • Able to learn the basic use of a smartphone, • Basic mechanical knowledge in order to make small repairs (change hydraulic hose, grease and lube, safety walk around inspection), • Able to pass pre-employment drug test and random drug tests after hiring, • Competitive hourly pay, • All lodging paid for by company, • $40 per diem, • Full health benefits including medical, vision, dental, life insurance, and more, • 401(K) retirement plan with company matching, • Paid time off, • Stable work through all seasons with, full time work through the winter, • Comprehensive Wellness program – offering 1:1 wellness coaching session This job description is not intended to be comprehensive list of the duties and responsibilities of the position. Duties and responsibilities may change without notice. Verification of your right to work in the United States, as demonstrated by your completion of the Form I-9 upon hire and your submission of acceptable documentation (as noted on the Form I-9) verifying your identity and work authorization within three days of starting employment. For your convenience, a copy of the Form I-9 List of Acceptable Documents is enclosed for your review. Satisfactory completion of a background investigation, for which the required notice and consent forms are enclosed. Successful completion and passing a drug and alcohol test. All job applicants are subject to drug and alcohol testing. National Salvage & Service Corporation and its related entities are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Holt CAT, the largest Caterpillar dealer of heavy equipment in the United States, is seeking an experienced Field Service Technician for the Fort Worth / Bridgeport Texas Region. The Field Service Technician's primary role is to conduct exceptional field service repairs, which include addressing problems such as pumps, hydraulics, engines, transmissions, HVAC, and electrical issues on heavy equipment like dozers, backhoes, front-end loaders, and excavators. Hours for this position will be Monday thru Friday 7am to 5pm, must be able to work overtime. Must have a valid driver license and a good driving record. Related construction equipment experience is preferred for this role. Must be able to obtain a CDL Class B. What can HOLT offer you? A competitive salary, front-loaded PTO, 401k matching plus a profit-sharing plan, comprehensive health care benefits, tuition reimbursement, wellness rewards, gym discount, an amazing employee development program with a department devoted to your professional development allowing you to grow your skills and build your competencies to prepare you for future opportunities at HOLT, and much more! T Education and Experience: • No Less than 4 (Four) years of diesel-powered heavy construction equipment repair experience in a field environment preferred, • CATERPILLAR Dirt Machinery Experience Required, • Ability to troubleshoot, diagnose, and repair equipment using electronic and manual equipment to determine failure., • Able to document all work orders properly, • Must be able to troubleshoot and diagnose Tier 4 systems., • Must b able to troubleshoot and diagnose EGR systems, • MSHA certification preferred, • Air conditioning certification preferred, • Crane/Rigger certifications preferred, • High school diploma or equivalent preferred, • Valid Driver’s license required, • Ability to obtain a valid Commercial Driver's License (CDL) and must have an acceptable driving record, • Must have all required mechanic hand and pneumatic tools (metric/standard), • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Performs advanced repairs and advanced troubleshooting offsite with minimal supervision, • Performs advanced troubleshooting and advanced diagnoses of equipment malfunctions and failures, • Removes and installs parts, disassembles and assembles basic components, • Tests, makes adjustments and verifies proper operation of all repairs and adjustments, • Prepares and completes all job-related documents, writes service reports, orders parts, and maintains clear customer records; in addition, accesses databases required to complete job, • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Maintains service vehicle inspection records, daily inspections and driver logs as required by the Department of Transportation, • Adheres to contamination control and HAZMAT rules and regulations, • Maintains all company equipment, tools, and vehicle in a good, clean, and working order, • Communicates job progress to supervisor and customer as needed, • Completes assigned jobs and task to meet flat rate time and re-work standards, • Works overtime as required by workload and customers’ needs, • Completes all assigned Technician Training Path courses and safety training in a timely and proficient manner, • Projects professionalism with both internal and external customers, including personal appearance; may be relied upon to act as a mentor to lower level Technicians, • Requires regular and punctual employee attendance, • Knowledge of safe work procedures and practices, • Moderate to Expert knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Moderate to Expert knowledge of hydraulics, transmissions, engines, undercarriage, and electrical, • Proficient with current computer software, related hardware, and basic knowledge of machine electronic systems, • Exceptional skills in customer service, • Advanced diagnostic and troubleshooting skills, Knowledge of CAT ET and CAT SiS 2.0 preferred, • Planning and organizing skills to prioritize and plan work activities; uses time efficiently; plans for additional resources, • Operation and control skills of equipment or systems, • Equipment selection skills to determine the kind of tools and equipment needed to do a job, • Ability to communicate clearly and effectively, both verbally and in writing, • Ability to operate a crane and forklift, and obtain required certifications/licenses, • Ability to meet deadlines and work under fast-paced, time-constraining circumstances, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Frequently moves materials or equipment weighing up to 80 pounds, • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet, and climb up and down ladders and/or equipment, • Be able to maneuver safely and work underneath equipment, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work #LI-HCT LI-JH1 #ZR#JH #CAT #Caterpillar #HOLTCAT #heavyequipment #dozer #excavator #motorgrader #scrapper #skidsteer #loader

Job Description Are you ready to be part of a dynamic and dedicated team? Pinnacle Propane, a leading propane distribution business operating in nine US states, is looking for a Service Technician to join our team. At Pinnacle Propane, we are committed to providing exceptional service to our customers and employees. Why Join Pinnacle Propane? At Pinnacle Propane, we value our employees and offer a comprehensive benefits package to support your well-being and work-life balance. When you join our team, you'll enjoy: • Great Benefits: Including medical, vision, dental insurances, amongst others., • Life Insurance: Financial protection for you and your family., • Community Volunteering Day: A paid day off to give back to the community and make a difference., • Paid Time Off: Generous PTO and company holidays to relax, recharge, and spend time with loved ones. Duties include focusing on Pinnacle Propane's core values of Safety, Integrity, and Customer Service. Ensure compliance with all Federal, State, and Local regulations pertaining to the storage, installation, delivery, and usage of all products that Pinnacle Propane supplies. Operate within the Policy and Procedures outlined in Pinnacle Propane employee and operation manuals. This position will report to the Branch Manager. Essential Job Functions: • Set, Repair, Maintain tanks and cylinders, • Install service lines to house, equipment, or building in accordance with Federal, State, Local regulations, • Ensure that Company and Government Safety, policy and regulatory standards are met and maintained, • Perform leak test and gas checks at customer sites, • Operate service/company vehicles in accordance with company and government regulations, • Maintain service/company vehicles by reviewing maintenance record, perform pre and post trip inspections. Secure vehicles and equipment consistent with company security instructions and policy, • Troubleshoot propane systems and propane appliances for any problems, • Convert gas appliances, • Perform repairs and adjustments on propane equipment, • During daily interaction with customers communicate clearly and effectively to convey information to new and existing customers, • Maintain a professional image and superior customer service, • Deliver propane gas and/or refined fuels as required, • Work a flexible schedule with after-hours and emergency callouts, • Communicate with supervisor of any issues that might impact safety, customer satisfaction, productivity, and other established goals and standards, • Prepare, complete, process, and maintain work orders and/or all job-related documentation, • Operate and maintain handheld truck computer and equipment, • Ability to lift, carry, push or drag hoses and equipment up to 60lbs, • Perform other duties as assigned Job Requirements Basic Qualifications (Required): • 1 Year of verifiable experience operating a Class B commercial motor vehicle, • Must be able to read, write, understand and speak the English language., • Ability to operate in adverse weather conditions, including off road., • Ability to abide by all DOT rules and regulations., • Ability to read, analyze, and interpret documents, manuals and reports., • Ability to respond to common inquiries or complaints from clients, regulatory agencies or members of the business community., • Consistently demonstrates cooperative, team-oriented behavior., • Safety conscious and understand safe work practices for operating in the oil and gas field and on the road., • Maintain cleanliness and perform minor maintenance on equipment as well as ensure equipment is mechanically sound and in good working order at all times and report deficiencies to maintenance staff. Minimum Qualifications (Required): • Class B CDL with HazMat, Tanker and Air Brakes, • Must pass pre-employment drug and random drug and alcohol testing, • Must pass a criminal background check, • Must have a good MVR, • No more than 3 moving violations in the last 3 years, 2 in last 2 years, or 1 in the last year, • No more than 1 preventable/at-fault accident in the last 3 years, 2 in the last 5 years, • No DUI, reckless driving, hit & run, suspended licenses, etc. in the past 5 years EEO Statement Pinnacle Propane is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Pinnacle Propane complies with all applicable federal, state, and local laws regarding nondiscrimination and affirmative action.

Job DescriptionJob Summary Reporting to the Area Manager/Regional Program Director, the CDL Program Director is responsible for providing leadership for the CDL Program. The CDL Program Director provides subject matter expertise and actively participates in curriculum development, revision, and implementation process. As the subject matter expert in a particular program, the CDL Program Director provides product knowledge training to the Account management group, utilizing materials generated via the centralized curriculum development process. This position is responsive to the Account management staff when asked to engage with potential students and actively participates in new student orientation. The CDL Program Director is responsible for hiring, assigning, orienting, developing, evaluating, and recognizing Driver Trainers within the program(s) of study. The CDL Program Director will convene meetings with faculty on a regular basis. The CDL Program Director is also responsible for monitoring and supporting the student population within his/her program of study. The CDL Program Director plays an active role in the student advising process, including advising students during the provisional period, meeting with students who initiate a complaint, advising students who have career-oriented questions, and consulting with students whose engagement and/or academic progress is in question. The CDL Program Director analyzes student population data, working with faculty and staff to identify students who may be at risk, and contacting students to identify barriers to success and to provide support and information concerning student services. Finally, the CDL Program Director is responsible for continuous improvement of the program. Actively engaged in the development and maintenance of the campus effectiveness plan, the CDL Program Director collects data for purposes of analyzing program performance. Key Responsibilities I. Provides Services to Students * Supplements Driver Trainer advising for students receiving failing assessments. * Provides academic advising as needed to students. Provides referrals to outside resources when counseling needs go beyond the scope of the school. Provides or arranges for student tutoring when needed. * Leads student retention initiatives for students in the program who experience barriers to success. * Maintains regular contact with all students within the program area and responds to their questions and/or concerns in a timely manner. Posts office hours for students. * Refers students to appropriate staff for non-academic problem resolution. * Contacts students who miss days from class or whose absence during the week results in more than four absences during the course. * Maintains records of interactions and correspondence with students (i.e. phone calls, emails, mail). * Monitors contact, and results of contact, from Driver Trainers to students in assigned program area(s). Makes calls weekly to students who (a) were not called or could not be reached; (b) did not return as promised; or (c) did not offer plans to return by a specific date. Offers appropriate academic advice and demonstrates genuine interest in students. * Identifies students needing tutoring. II. Oversees Status of Quality of Curriculum, Instructional Materials, Equipment, and Facilities * Serves as a subject matter expert regarding academic curriculum for program area. * Actively participates in the curriculum development/revision process led by the Home Office Executive team. * Provides leadership in the implementation of new and revised curriculum. * Provides input into creating the master schedule regarding course sequencing, offerings, room assignments, and Driver Trainer teaching assignments. III. Oversees Faculty Performance and Development * Assists the Area Manager/Regional Program Director in the recruitment, interviewing, and hiring of faculty for program of study. * Orients, monitors, supervises, mentors, and assists new Driver Trainers. * Ensures that all program area Driver Trainers adhere to required administrative and classroom delivery duties and requirements as outlined in the job description for CDL Driver Driver Trainer. * Ensures completeness of faculty files and documentation of official transcripts, professional development, observations, and performance reviews. * Provides leadership and supports all Driver Trainers and supervises their instructional and program needs. * Observes classes within the program area and coaches Driver Trainers to continually improve instructional presentation and classroom management skills. * Conducts performance appraisals of department faculty members, including areas of strength and recommendations for improvement and future skillset development. * Conducts regular weekly day and evening faculty meetings. Meeting topics may include improvement of course offerings, methods of instructional delivery, selection of texts, and such other purposes which serve to improve the quality of the instructional program. Documents all meetings. * Provides departmental product knowledge training to Account management and Career Services personnel as requested. * Provides information to all departments as trends and changes in program specialty areas occur. * Assists account management personnel with student recruitment as requested. * Promotes faculty participation and provides leadership in the professional development activities of program faculty members and the documentation of those activities. * Participates actively in a minimum of one professional organization within the community. * Attends faculty meetings and in-service programs. Maintains a record of professional development activities. * Maintains current personal knowledge of federal and state institutional regulations, and accreditation standards related to program area. * Participates in preparation of government and accreditation reports and ensures their timely submission and accuracy. * Assists the Area Manager/Regional Program Director in evaluating data collected from student questionnaires and conducts faculty conferences when necessary to discuss the results and provides recommendations for improvement. * Maintains regular office hours each week to ensure consistency between day and evening policies, procedures and instruction. * Collaborates with peers and associates to ensure coordination of interdepartmental activities. * Intervenes in and works to resolve any personnel issues that arise among program area Driver Trainers. * Assists the Area Manager/Regional Program Director in planning program budgetary needs if and when applicable. * Performs all duties of a full-time Driver Trainer. IV. Leads and Develops Others * Provides clearly defined roles and objectives for driver trainers, monitors performance, provides feedback, and meets regularly to discuss priorities. * Resolves individual and group performance opportunities in a timely manner to motivate and foster teamwork. * Identifies opportunities to involve others in new and challenging work assignments that advance the skills and capabilities of individuals and the organization. Experience and Education Required * High school diploma or GED. * Industry certification in the field of instruction if required by industry, or demonstrated knowledge equivalent to the certification. * 3 years of experience in academic instruction in a post-secondary environment. * 5 years of industry experience in the field of instruction. * 2 years of experience in a management or supervisory role. * Ability to qualify as a CDL Driver /Driver Trainer. * Knowledge regarding faculty development, including requirements, delivery methods, and reporting. * Motivation, dedication, professionalism, integrity, and enthusiasm for teaching. * Ability to show sensitivity to the needs and requirements of adult learners. * Ability and desire to embrace the school’s mission. * Ability to inspire students to the highest level of achievement in preparation for meeting employer expectations. * Knowledge of industry standards and requirements within the field of instruction. * Knowledge of and ability to facilitate learning on course content within the field of instruction. * Excellent organizational skills. * Knowledge of Microsoft Office programs and database programs (CampusVue preferred). * Ability to develop and use collaborative relationships for the purpose of accomplishing work objectives; developing relationships with other individuals by listening, sharing ideas, and appreciating others' efforts. * Superior verbal and written communication skills. * Interpersonal relationship skills necessary for positive interactions with students, alumni, faculty, and employers. * Excellent creative and problem solving skills in dealing with students, alumni, employers, faculty, and staff. * Ability to meet and/or exceed defined goals. * Excellent presentation skills and ability to present ideas effectively to individuals or groups in a formal setting. * Management skills in planning, organizing, controlling and evaluating programs and policies in a dynamic and changing environment. * Knowledge of the federal FMCSA and state Department of Motor Vehicle standards. Experience and Education Preferred * Associate’s Degree or higher, documented specialized competency within the field of instruction, or equivalent work experience in the field of instruction. * 5 years of experience in academic instruction in a post-secondary environment. * 10 years of experience in the field of instruction. * Working knowledge of federal/state government education regulations. * 3 years of experience in a management or supervisory role. * Previous experience as an academic program director. * Experience in student guidance, or related fields. * Working knowledge of federal/state government regulations. Physical Demands * Mobility & Balance: Ability to frequently climb in/out of the cab, bend, squat, kneel, twist and reach to perform pre/post-trip inspections and navigate tight spaces. * Strength: Ability to crank trailer landing gear (often 100+ lbs), handle training and safety equipment, and potentially assist with loading/unloading (if applicable). * Endurance: Ability to sustain physical activity and be alert during extending driving and instructional periods, including exposure to varying weather conditions such as heat, cold, wind, rain, ice or snow. * Sensory Acuity and Overall Health: Must possess and maintain a valid DOT Medical Examiner’s Certificate and meet DOT physical qualifications required to hold a CDL, with or without reasonable accommodations, as required by Federal regulations. Specific Tasks & Considerations: * Demonstrating Skills: Physically showing students how to couple/uncouple trailers, perform inspections, and maneuver the large vehicle. * Environmental Exposure: Working outdoors in various conditions including extreme heat, cold, rain, or snow while training. Work Environment Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is usually not exposed to weather conditions. The noise level in the work environment is usually moderate. Note This is not necessarily an exhaustive list of all responsibilities, skills, duties, or requirements associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or require that other or different tasks be performed when circumstances change. I have read and understand the above job description. I further understand that this is not an all-inclusive list and does not constitute a contract. My employment remains at will as with all employees of Ancora Education.

Job Description Job Summary: Provides exceptional customer service while inspecting, repairing, and providing maintenance to trucks, trailers, and attachments for On-Highway vehicles. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Troubleshoots, diagnosis, and repairs On-Highway trucks both Cat and OEM, • Performs engine and related equipment repairs on Trucks and Trailers, • Disassembles, inspects, determines parts required, and reassembles to factory specifications within TRGs, • Adheres to contamination control and HAZMAT rules and regulations, • Provides quality control/assurance inspections of completed tasks to include road testing, • Uses computers and related software to assist in diagnosing and reprograming engines, • Completes documentation for service reports, timecards, parts requisition and returns, • Maintains all company equipment, tools, and vehicles in a good, clean, and working order, • Interprets and utilizes information from operating, maintenance, online resources, and service manuals/bulletins, • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Travels to and from the job site and travels to retrieve parts, • Listens and understands customer complaints, quotes and explains repair costs, and schedules appointments with customers while providing clear communications, • Orders parts needed to complete repairs, • Completes and files documentation necessary to justify billing, • Responds to customer needs after hours when needed, • Communicates job progress to supervisor and customer as needed, • Works overtime as required by workload and customers’ needs, • Maintains a P Factor of 100% or greater, • Maintains less than .5% rework for years total sales, • Projects professionalism with both internal and external customers, including personal appearance, • Acts as a mentor and coach to lower level Technicians, • Completes all assigned Technician Training Path courses and safety training, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Knowledge and proficiency with current computer software, related hardware, and On-Highway Truck electronic systems diagnostic tooling, • Knowledge and ability to explain how various systems function on trucks and trailers, • Operation and control skills of On-Highway Trucks & Trailers, • Problem-solving and troubleshooting skills, • Verbal communication skills, • Exceptional skills in customer service, • Excellent time management and organizational skills, • Ability to follow logical troubleshooting procedures, • Ability to learn and navigate various software for both CAT and OEM, • Ability to work independently and as part of a team, • Ability to be self-starting and motivated, • Ability to operate a conventional forklift, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair and overhead crane, • Ability to operate an On-Highway Truck on public roads, • Ability to make precisely coordinated movements of the fingers of one or both hands in order to grasp, manipulate, or assemble very small objects, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences Education and Experience: • High school diploma or equivalent, accreditation from a technical school or an applicable skilled trades program required, • Minimum of three years of experience required, • CDL – Class A or B required, • ASE Certifications preferred, • Has met HDSI requirements for Service Field Tech 1; Ability to complete HOLT's VBL Classes, model HOLT's VBL Culture, and successfully apply the tools, • On-going Safety Training required Supervisory Responsibilities: • None Travel: • Travel up to 40% and overnight travel may be required Additional Requirements: • Must own and maintain the necessary tools to efficiently perform the job, • Must have a clean driving record Physical Requirements: • Significant amount of time sitting, standing, walking, kneeling, crouching, stooping, crawling, climbing, and reaching, • Constant movement and use of hands, this position requires good manual dexterity, • Communicates with customers, service managers, and co-workers, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath equipment, • Frequently lifts and moves materials and equipment up to 70 lbs., • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment Work Environment: • Frequently works outdoors around moving mechanical parts and exposed to weather extremes that include inclement weather, heat, cold, and humidity, • Exposure to minor burns, cuts, bites, or stings, • Exposure to small quantities of chemical, dust, steam, high-pressure water, and high speed rotating equipment, • Exposure to hazardous conditions and contaminants, • Works in an enclosed vehicle or equipment, • Works in extremely bright or inadequate lighting, • Exposure to high noise levels Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Job Description RESPONSIBILITIES: This position is responsible for performing high-quality lubrication and periodic maintenance service work on heavy equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. REQUIREMENTS: This position requires a self-motivated, detail-oriented individual with a high energy level who must be able to: • Work alone with a limited amount of supervision, • Correctly service equipment with proper fluids and filters, • Complete machine inspections, • Minimum of 2 years heavy equipment repair experience, ability to work a flexible schedule required Mon - Friday - 6 AM - 5 PM and working at least 2 Saturdays per month and travel overnight about 4 days per month #LI-TFR #LI-HCT #LI-MFG #LI-HIR #CAT #CATERPILLAR #HOLTCAT

Job Description Job Summary: Diagnoses, repairs, reconditions, and adjusts key systems and components of trucks and related equipment. Mid-level position – Generally has more than three years of experience and/or demonstrated job relevant knowledge/skills. A level two technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level two technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and self-starting; often a team member on a large project. Essential Functions: • Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission, • Troubleshoots and diagnoses moderately complex engine malfunctions and failures with direction and minimum supervision, • Performs thorough engine and related equipment repairs on trucks and trailers with direction and minimum supervision, • Disassembles, inspects, determines parts required, and reassembles to factory specifications within TRGs, • Provides quality control/assurance inspections of completed tasks to include road testing, • Uses computers and related software to assist in diagnosing and reprograming engines, • Completes documentation for service reports, timecards, parts requisition and returns, • Interprets and utilizes information from operating, maintenance, online resources, and service manuals/bulletins, • Operates equipment and vehicles with possession of all necessary licenses and certificates, • Adheres to contamination control and HAZMAT rules and regulations, • Maintains all company equipment, tools, and vehicle in a good, clean, and working order, • Communicates job progress to supervisor and customer as needed, • Works overtime as required by workload and customers’ needs, • Projects professionalism with both internal and external customers, including personal appearance, • Acts as a mentor and coach to lower level Technicians, • Completes all assigned Technician Training Path courses and safety training, • Consistently maintains an average rework of less than 1%, • Ensures a positive average variance consistently, • Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards, • Requires regular and punctual employee attendance, • Performs other duties as assigned Knowledge, Skills, and Abilities: • Ability to meet all requirements as outlined in Leveling Description Guide to include; Basic Requirements, Electrical System, Engine Systems, AC/Heat System, Fuel System, Compressed Air Systems, Cooling System, Rear Differential, Intake/Exhaust Systems, Drive Train Components, Clutches, Tier IV Engine Emission Systems and Transmissions, • Ability to meet all technical and performance requirements for a level one technician, • Solid knowledge of equipment and tools, including their designs, uses, repair, and maintenance, • Sound knowledge and proficiency with current computer software, related hardware, and electronic systems diagnostic tooling, • Operation and control skills of vehicle fleet, • Problem-solving and troubleshooting skills, • Verbal communication skills, • Exceptional skills in customer service, • Excellent time management and organizational skills, • Ability to follow logical troubleshooting procedures, • Ability to work independently and as part of a team, • Ability to operate a conventional forklift, • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in mechanical repair & overhead crane, • Ability to operate a vehicle on public roads, • Ability to make precisely coordinated movements of the fingers of one or both hands in order to grasp, manipulate, or assemble very small objects, • Ability to read, write, and understand information, • Ability to listen to and understand information and ideas presented through spoken words and sentences, • Ability to complete HOLT's VBL Classes, model HOLT's VBL Culture, and successfully apply the tools (Learn) Education and Experience: • High school diploma or equivalent, accreditation from a technical school or an applicable skilled trades program required, • At least two years of experience required, three or more preferred, • CDL – Class A or B preferred, • ASE – Medium/Heavy Truck Certification four or more preferred, • AC Certification Required, • Brake System Certification Required, • Has met HDSI requirements for Service Tech 1; Ability to complete HOLT's VBL Classes, model HOLT's VBL Culture, and successfully apply the tools, • On-going Safety Training required Supervisory Responsibilities: • None Travel: • Up to 5% travel or overnight stays, • Up to 5% travel to other stores that require help during times of heavy workloads may be expected Additional Requirements: • Must own and maintain the necessary tools to efficiently perform the job, • Valid driver’s license and acceptable driving record Physical Requirements: • Significant amount of time spent standing, • Constant movement and use of hands, this position requires good manual dexterity, • Communication with customers and constant communication with co-workers, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work, • Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue, • Be able to maneuver safely and work underneath equipment, • Lifts and moves materials and equipment up to 50 lb, • Occasional kneeling, crouching, stooping, crawling, reaching, and balancing, • Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment Work Environment: • Regularly works indoors around moving mechanical parts, • May be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity, • Frequently works in an enclosed vehicle or equipment, • Requires wearing common protective or safety equipment, • Exposure to high noise levels, • Works in extremely bright or inadequate lighting, • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high speed rotating equipment, • Exposure to minor burns, cuts, bites, or stings Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

Currently Hiring Class A CDL Truckers. Category: , Keywords: Class A Driver.

Notify managers of any major maintenance or delivery issues encountered * Follow delivery schedule and rest at appropriate times * Maintain detailed driving and delivery logs * Track and report working hours * Adhere to company rules and regulations * Obey all applicable traffic laws and drive accor

Job Description Job Description We're seeking experienced OTR Truck Drivers with a Class A CDL and strong flatbed/oversize load expertise to transport freight safely and efficiently across the country. Qualifications * Valid Class A Commercial Driver's License (CDL).

Job Description Job Description NEW OTR CDL-A CAREER OPPORTUNITIES We are seeking Class A Drivers with 2 Years of experience that are reliable and organized who will go above and beyond!! Whether you're a seasoned veteran with a knack for hauling refrigerated freight or have 2 years minimum experi

We are looking for the best of the best, and want you to retire with us! As a Regional Direct Store Delivery Class A CDL Driver, you will be a vital part of a team that drives our business forward while positively impacting the communities we serve. Must possess a valid Class A Commercial Driver's L

We're looking for Class A CDL drivers that have a minimum of 3 months experience OTR or Dedicated Regional.

High School Diploma or GED, 21+ years old, valid driver's license and a class A CDL license. CDL driving experience are strongly preferred.

Must possess a valid commercial driver's license (CDL-A) with hazardous materials, and twin/triple trailer endorsements.

Paradym Trucking is searching for qualified CDL A Drivers with at least 12 months of driving experience that are interested in joining our team. Paradym Trucking Cdl A Drivers.

Oak Farms of Dallas is looking for dependable CDL Drivers (Class B) to operate a Straight Truck to deliver various dairy products to customer locations on an assigned route schedule. Maintain a valid Class B (or A) CDL and current DOT medical card. Oak Farms Of Dallas Cdl Drivers (Class B).

MILES, GREAT PAY, NEW EQUIPMENT AND BENEFITS!.VSS offers newer equipment with.Our drivers average 3000 miles a wk.Come be a part of a winning team, where you are not just a truck number, you are.VAN/ REEFER -STARTING PAY RANGES FROM.TEAM PAY -STARTING PAY RANGES FROM.FLATBED-STARTING PAY RANGES FROM

This position could include: Driving - CDL - Class A CDL - Delivery Truck Driver - OTR - Delivery Driver - Customer Delivery - Commercial Driver's License. Valid Commercial Driver's License A (CDL A). We operate with a differentiated business model and world-class brand portfolio, powered by a talen

You are home bi-weekly with this regional Class A OTR driving position. The driver will enjoy no touch freight with excellent benefits, and only 6 months class A experience needed. Qualified Class A drivers will have 6 months tractor trailer experience.

Dallas, TX 75201- Home Weekly CDL A Truck Driver. CDL A Truck Driver Position Details. Earnings: Our CDL A truck drivers earn a weekly pay of $1,275 to $1,350, reflecting our appreciation for your hard work and dedication.

Only 12 months CDL experience needed.

Ryder is hiring a Class A CDL Truck Driver in Dallas, TX offering weekly pay, excellent benefits, and a driving career you can feel good about. Provide appropriate CDL and endorsements for the position. Must have Class A verifiable experience in a tractor trailer or comparable vehicle:.

Regional Class A CDL Driver Dedicated Routes, No Touch Freight. Looking for a driving career that offers consistency, competitive pay, and weekly home time? We're hiring Class A CDL Regional Drivers in the Dallas area to run dedicated lanes with no-touch freight and 100% dry van loads. No endorseme

Are you looking to get your CDL Class A and enter the world of trucking? The Knight CDL Academy is the CDL School for you. With small class sizes, advanced technology, and experienced instructors, Knight will provide the foundation for a rewarding career in trucking!. CDL School Training with Knight

CDL Class A and an above average DOT safety record.

The Class A CDL Tanker Driver is a critical position responsible for the safe and efficient transportation of liquid cargo to various destinations. Valid Class A Commercial Driver's License (CDL) with tanker endorsement. Valid Class CDL-A in state of residence with a TANKER endorsement Roll Off or

CDL Class A driving experience. Valid Class A CDL with endorsements. D&M Auto Leasing seeking a CDL Driver for the nation's largest auto leasing company.

Requires a Class A CDL, at least 6 months experience driving Class A tractor/trailer within the last 3 years (all must be verifiable). Class A CDL Drivers Needed ASAP- Local Route- Home Daily.

Class A CDL Team Drivers - DOD Clearance Needed. We are seeking experienced Class A CDL Team Drivers with DOD Clearance to join our fleet.

A valid State issued CLASS C driver's license. Ability to obtain all local, state, and federal requirements for CDL holder.

CDL Class "A" Truck Driver - $2,500 sign on bonus!. Class "A" CDL driver's license. Dallas) CDL Class "A" Truck Driver*.

Hiring Class A CDL Truck Drivers.

Cornerstone Building Brands - 9001 Ambassador Row - Responsibilities: Deliver building materials to retail stores and construction job sites using a tractor-trailer; Inspect vehicle before, during, and after use to determine safe operating condition; Log driver activities and maintain trip and inspe

Safely operates a tractor-trailer or a straight truck with a pup trailer (or other vehicle requiring a Class A CDL) to perform assigned duties on designated routes. Commercial Driver License (CDL) Class A Upon Hire.

Ready to put your truck-driving career in high gear? Make the shift and fuel your career as a CDL Class A Truck Driver for Penske. Immediate Opportunities: Full-time Local Class A CDL Truck Drivers. Best-in-class specs designed for comfort.

Clean Class A CDL = No Accidents or Incidents within past year. About the job Class A CDL- Dedicated Regional OTR- (TX-TN-FL) $1215-$13505-7 Days Out.

Minimum Qualifications:* Valid Class A Commercial Driver's License (CDL) with tanker endorsement. Basic usage of computer and cell phone for training, communication, and expense managementRequired Skills & Abilities:* Valid Class CDL-A in state of residence with a TANKER endorsement - Roll Off or Tr

Ready to move your career forward? Pace is hiring a Class A Driver in Dallas, TX. Pace is seeking a Class A Driver that will be responsible for deliveries between Pace cross docks or customer locations in the Southeastern region. Providing our customers with first-in-class experience.

Tricont Trucking Company, a proud member of the Del Monte Fresh, is now hiring Class A CDL Drivers for permanent, year-round, Full-Time positions in Dallas, TX.

Paradym Trucking Cdl A Drivers. Paradym Trucking is searching for qualified CDL A Drivers with at least 12 months of driving experience that are interested in joining our team.

CDL Class A or B is required (all local routes and airport). Local CDL truck drivers must be able to read and write to complete required forms. Local CDL truck drivers work overtime when required.

Paradym trucking is looking for CDL drivers with at least 12 months of experience as a CDL A Driver. CDL Class A experience with 6 months of flatbed in last 5 years. Paradym Trucking CDL Driver Opportunity.