Trabajos cnc en Syracuse, New YorkCrear alertas

Company Summary Our client is a growing industrial automation and systems integration company that designs, builds, and commissions automation solutions for manufacturers across a variety of industries. The organization works with PLCs, robotics, collaborative robots, conveyors, machine interfaces, sensors, controls, and other industrial automation technologies. The company is expanding its automation capabilities and is looking to add an experienced controls professional who can contribute to projects from programming and integration through installation and commissioning. This is an opportunity to join a growing team where the individual will have meaningful technical responsibility and the potential to grow into a broader leadership role as the business expands. Job Summary The PLC Programmer / Robotic Integration Engineer will be responsible for programming, integrating, troubleshooting, and commissioning industrial automation systems. This position will have a strong emphasis on PLC programming and controls while also involving robot and collaborative robot integration, machine communication, HMI development, networking, sensors, motion control, and system troubleshooting. The ideal candidate is a hands-on automation professional who enjoys solving complex technical problems and working directly with equipment and customers. The ability to work across multiple automation platforms is more important than having deep expertise in one specific manufacturer or technology. The position is based in Syracuse, New York, with some flexibility for remote work when project requirements allow. The individual will spend time at the company's facility as well as customer sites during installations, commissioning, troubleshooting, and project implementation. Responsibilities • Program and modify PLC control systems using Ladder Logic, Structured Text, SFC, and other IEC 61131-3 programming environments., • Develop and modify HMI/SCADA applications for machine operation, diagnostics, alarms, recipes, and system monitoring., • Integrate industrial robots and collaborative robots into automated production systems., • Configure and troubleshoot communication between PLCs, robots, cobots, CNC machines, conveyors, HMIs, sensors, drives, and other equipment., • Integrate industrial networks and communication protocols including EtherNet/IP, EtherCAT, Modbus TCP, and similar technologies., • Configure and troubleshoot servo drives, VFDs, motion systems, and high-speed I/O., • Configure robot signals, sensors, pneumatic systems, safety devices, machine interfaces, fixtures, and other field I/O., • Assist with control system design, I/O development, electrical schematic review, device selection, and panel checkout., • Commission automation systems both internally and at customer facilities., • Troubleshoot mechanical, electrical, controls, networking, and software issues and determine root causes., • Perform PLC upgrades, machine communication improvements, controls modifications, and automation retrofits., • Provide technical support during customer installations and production startups., • Configure remote-access systems and provide remote troubleshooting support when appropriate., • Document PLC programs, network configurations, startup procedures, and system modifications., • Train customer maintenance and technical personnel on equipment operation and troubleshooting., • Work directly with customers to understand technical requirements and develop practical automation solutions., • Support technical sales activities, project planning, site assessments, and customer meetings when needed., • Develop reusable programming standards, function blocks, templates, and other tools to improve future projects., • Travel to customer locations for project assessments, installations, commissioning, and troubleshooting. Requirements • 3+ years of hands-on PLC programming experience in an industrial automation, controls, manufacturing, or systems integration environment., • Strong practical understanding of industrial automation and controls., • Experience programming PLCs and troubleshooting control systems in a production environment., • Working knowledge of IEC 61131-3 programming environments, including Ladder Logic and/or Structured Text., • Experience integrating PLCs with robots, machines, conveyors, HMIs, sensors, drives, and other industrial equipment., • Working knowledge of industrial communication and networking, particularly EtherNet/IP and/or EtherCAT., • Ability to read electrical schematics and troubleshoot control panels using appropriate diagnostic equipment., • Experience with servo drives, VFDs, motion control, or related automation technologies., • Strong troubleshooting and problem-solving skills with the ability to independently research issues and identify root causes., • Ability to work comfortably on the plant floor and directly with machinery and automation equipment., • Strong communication and interpersonal skills with the ability to interact professionally with customers, operators, maintenance personnel, and engineering teams., • Ability to manage projects and technical assignments with a high degree of independence., • Willingness and ability to travel approximately 25–40% for customer projects., • Valid driver's license and ability to travel throughout the United States., • Ability to work in a hands-on environment involving equipment installation, startup, testing, and commissioning. Preferred Requirements • Experience programming or integrating collaborative robots or industrial robots., • Experience with FANUC, Universal Robots, Doosan, or similar robotic platforms., • Experience with palletizing, packaging, material handling, machine tending, or conveyor automation., • Experience with CODESYS-based platforms, Rockwell Studio 5000, Siemens TIA Portal, Beckhoff TwinCAT, Panasonic, or similar PLC platforms., • Experience with vision systems such as Cognex, Keyence, or robot-integrated vision., • Experience with end-of-arm tooling, pneumatic systems, vacuum systems, and robotic grippers., • Experience with safety PLCs, safety-rated devices, machine guarding, and industrial robot safety standards., • Experience with remote-access systems, VPNs, industrial networking, or OT network architecture., • Experience with edge devices, industrial PCs, or gateway technologies., • Robot manufacturer certifications or formal robotics training., • Associate's or Bachelor's degree in Electrical Engineering, Electrical Technology, Mechatronics, Computer Engineering, Computer Science, or a related technical discipline., • Experience developing reusable PLC code, function blocks, programming standards, or automation libraries., • FANUC training or certification is a plus; additional training may be provided. Compensation & Benefits • Salary: $80,000–$120,000, depending on experience and capabilities., • Performance or project-based bonus opportunity., • Possible monthly vehicle/car allowance., • Company-paid business travel and travel-related expenses., • Health, dental, and vision insurance., • 401(k) with company match., • Paid time off and company holidays., • Company laptop, tools, and equipment necessary to perform the role., • Training and certification opportunities on new automation, robotics, and controls platforms., • Opportunity for increased responsibility and advancement as the automation business continues to grow. Location Syracuse, New York This is a primarily on-site position. The successful candidate will need to be available to work with automation equipment at the company's Syracuse-area facility and travel to customer locations for project implementation, installation, commissioning, and troubleshooting. Travel is expected throughout New York and the Northeast, with additional projects potentially requiring travel to the Southeast and other locations within the continental United States. Some remote work may be possible when project requirements permit. Typical customer assignments may include an initial site visit to assess the application and develop an implementation plan, followed by an installation and commissioning period. Travel frequency will vary based on the project schedule, with some assignments requiring overnight stays.

NC/CNC Machine Set-Up & Operator – 1st Shift Location: Syracuse, NY Shift: 1st Shift | 6:30 AM – 2:30 PM We are seeking an experienced NC/CNC Machine Set-Up & Operator to perform machining setups and operations across a variety of machine shop equipment and metal materials. Key Responsibilities: • Set up and operate engine lathes, vertical turret lathes, radial/spindle drill presses, shapers, surface grinders, and horizontal/vertical milling machines., • Select appropriate tools, attachments, feeds, and speeds based on material and finish requirements., • Layout and machine production and specialty castings to required tolerances., • Work with steel, iron, brass, bronze, aluminum, and other metals., • Layout, machine, fit, and assemble jigs and fixtures., • Determine machining sequences and perform calculations involving angles, tapers, fits, and dividing heads., • Inspect parts for finish allowance, material defects, and machining issues., • Maintain machines and work areas according to 5S and safety standards. Basic Qualifications: • High School Diploma/GED., • Minimum 2 years of NC/CNC setup and operation experience., • Must reside within 50 miles of Syracuse, NY; no relocation assistance available. Active-duty military candidates are exempt from the geographic restriction., • Must be legally authorized to work in the U.S. without current or future sponsorship.

MASTER SCHEDULER - AEROSPACE If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. COMPENSATION RANGE: $60,000.00 - $85,000.00 Consolidated Precision Products (CPP) Chittenango is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit _ WHAT WE OFFER • Comprehensive Benefit Plans, • Quarterly Bonus Opportunity, • 401k with Company Match, • Emphasis on Employee Engagement, • Paid Holidays and Vacation Time, • Tuition Reimbursement, • Opportunities for Advancement SUMMARY The Master Scheduler is responsible to ensure products meet on-time delivery (OTD) and budget objectives at the direction of the Manufacturing Manager, working with Production, vendors, Accounting, and Customer Service RESPONSIBILITIES • Attend daily operation line walk to communicate Customer priorities and review department OTD., • Attend weekly SIOP and SLB meetings to draft production commitments or timetables using sales forecasts and work in progress (WIP)., • TOC management, • Work with Manufacturing Manager to plan production schedule based on available personnel, materials, and equipment. Create priorities for CNC and constraint locations when FIFO’s not possible., • Review production schedules to determine material requirements and material priorities. Review with Purchasing to ensure materials are available before production release., • Compile and prepare documentation related to production sequences., • Create and distribute weekly production schedules to the Manufacturing Manager for wax. Print production travelers and distribute weekly., • Create and distribute daily foundry production schedules to individual cast units. Monitor alloy release and alloy charge cutting to ensure materials are available for the production schedule., • Confer with wax and foundry Manufacturing Managers to assess progress against production schedules and discuss needed changes., • Monitor inventory levels to ensure WIP is available to meet Customer demand. Create reruns when scrap exceeds planned yield rates., • Communicate with Production and Customer Service on delays, interruptions, difficulties, and reprioritization., • Revise and distribute production schedules as necessary due to labor or material shortages, backlogs, etc., collaborating with sales and management., • Create and distribute exception reports: materials, deliveries, schedule adherence., • Monitor and report on plant compliance with the sales plan., • Assure that BOM accuracy is maintained by Engineering, who owns the BOM., • Run lead time reports, analyze data, and share with manager., • Analyze and publish weekly on-time delivery statistics for legacy products and new product development using SPAN Measure., • Meet with Sales and Customer Service to discuss long-term forecasts (2+ months) and changes., • Maintain buffer stock inventory levels for finished goods QUALIFICATIONS, • Education: Associate degree or relevant experience, • Experience: Manufacturing Experience. Minimum three (3) years related manufacturing experience with at least (3) in a related planner/scheduler/analyst position, • Certifications/Licenses: None, • Other Required Knowledge, Skills & Abilities: Knowledge of applicable products and raw materials. Knowledge of production processes. Excellent organizational and planning skills. Excellent communication (verbal and written) skills. Excellent influencing skills. Strong problem solving skills. Excellent analytical skills. Excellent computer related skills in Microsoft Word, Power Point, Excel and Access. Excellent understanding of ERP. Knowledge and skills in Oracle. Strong interpersonal skills. Strong negotiating skills. Strong conflict management skills. Ability to “think outside the box”. Self-starter. Detail oriented. Assertive. Hands on. Results driven. Sense of urgency. This is a non-management position This is a full time position Pay Range: 60,000 - 85,000

Eaton's ES GEIS CHD division is currently seeking a NC/CNC Machine Operator - 3rd Shift. The core hours are 10:30pm to 6:30am. The hourly rate for this position is $22.52 + $1.50/hour shift premium per hour.\n \n \nPlease note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. \n \n What you'll do:\n \n \n\n • Perform a wide range of machining operations on two or more Numerically Controlled Machines.\n, • Assist in the setting up of the equipment as directed and work with operation sheets, tapes and blueprints as required.\n, • Change tooling, load automatic tool changes and maintain quality standards by checking parts with adjustable or fixed gauges.\n, • Assist in isolating and correcting malfunctions in machining control units.\n, • Perform various internal operations related to producing a finished product.\n, • Maintain work area, machines and control units in a clean, neat and orderly condition and move material to and from workstations.\n, • Perform Total Productive Maintenance (TPM) activities such as minor maintenance that includes cleaning, inspection, minor lubrication and tightening loose bolts.\n, • Duties involve application of some specialized knowledge and experience and the use of judgment to plan and perform sequence of operations or procedures within limits of standard or recognized methods and established precedent.\n\n \n Qualifications:\n \n Basic (Required) Qualifications: \n \n\n • High school diploma or GED\n, • Minimum one(1) years' previous work experience in CNC operation\n, • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse facility (50 miles) will be considered for this position.\n, • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.\n\n \n#IND123\n \n \nWe are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.\n \n \nEaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number.\n \n \nWe know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Job DescriptionDescription: Job Summary: Feldmeier Equipment is seeking highly motivated individuals with a strong work ethic and machine operation experience to join our 1st shift production team! Work in a state-of-the-art facility that provides a rewarding full-time career, in an enjoyable, fast-paced environment. Feldmeier offers the opportunity to learn a skill and fabricate stainless steel parts & vessels for customers around the world. Requirements: Essential Functions of Position: • Set up machines (calibration, cleaning etc.) to start a production cycle., • Control and adjust machine settings such as speed, pressure, direction., • Troubleshoot issues that might occur with the machine during the shift., • Check finished parts to spot any machine-related mistakes or flaws., • Observe and follow company safety rules and regulations. Minimum Qualifications: • Detail orientated., • Strong ability to multitask., • Good work ethic, • Ability to work independently and be self-motivated., • Reliable Transportation Preferred Qualifications: • Machine Operation Experience in a Manufacturing setting., • Basic knowledge of hand tools., • Basic knowledge of metal cutting/welding., • Experience with CNC controls., • Ability to add, subtract, multiply, and divide using fractions, decimals etc., • Metal Forming/Polishing experience is a plus., • Ability to read and understand Blueprints is a plus. Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day and occasional lifting, carrying, and maneuvering up to 50 pounds. · Ability to climb ladders, stairs, and platforms for elevated work. · Walking, bending, squatting, kneeling, balancing, stooping, lying down inside or under vessel and twisting while performing required job tasks. Being mindful of chemical safety and use proper PPE when required. Job Title: Machine Operator Reports To: Shop Supervisor Classification: non-exempt Pay Range: $22.00- $31.50 Night Shift: 3:30pm-2am Shift Differential: $2

Job Description Machining Department Technical Lead (Master Machinist) Syracuse, NY | 1st Shift | $38-$50/hr Sign On Bonus | Relocation available for well-qualified candidate We are seeking a hands-on Machining Department Technical Lead with extensive experience on Davenport and/or Acme Gridley multi-spindle screw machines. This role will lead machining operations, troubleshoot complex manufacturing issues, optimize processes, and mentor machinists and operators. Responsibilities • Lead setup, troubleshooting, repair, and optimization of Davenport and Acme Gridley machines, • Develop machining processes, tooling strategies, and work instructions, • Support production scheduling, quality, efficiency, and throughput goals, • Train and mentor machinists, setup technicians, and operators, • Drive continuous improvement, machine reliability, and preventive maintenance initiatives Requirements • 10+ years of machining experience, • 5+ years of hands-on Davenport and/or Acme Gridley multi-spindle screw machine experience (required), • Strong blueprint reading and GD&T interpretation skills, • Experience with micrometers, calipers, bore gauges, indicators, and thread gauges, • Proven leadership, troubleshooting, and process improvement abilities Preferred • CNC setup/programming experience, • Lean manufacturing experience, • Prior Lead Machinist, Technical Lead, or Supervisor experience, • ERP/MRP system experience Compensation & Benefits • $38-$50/hr DOE, • Potential sign-on bonus and relocation assistance, • Medical, Dental, Vision, • 401(k) with company match, • Paid vacation and holidays, • Tuition assistance, • Overtime available Note: Experience with Davenport and/or Acme Gridley multi-spindle screw machines is mandatory. This is the client's top hiring requirement.

Job DescriptionDescription: Job Summary: Feldmeier Equipment is seeking highly motivated individuals with a strong work ethic and machine operation experience to join our 1st shift production team! Work in a state-of-the-art facility that provides a rewarding full-time career, in an enjoyable, fast-paced environment. The ideal candida Feldmeier offers the opportunity to learn a skill and fabricate stainless steel parts & vessels for customers around the world. Requirements: Essential Functions of Position: • Set up machines (calibration, cleaning etc.) to start a production cycle., • Control and adjust machine settings such as speed, pressure, direction., • Troubleshoot issues that might occur with the machine during the shift., • Check finished parts to spot any machine-related mistakes or flaws., • Observe and follow company safety rules and regulations. Minimum Qualifications: • Detail orientated., • Strong ability to multitask., • Good work ethic, • Ability to work independently and be self-motivated., • Reliable Transportation Preferred Qualifications: • Machine Operation Experience in a Manufacturing setting., • Basic knowledge of hand tools., • Basic knowledge of metal cutting/welding., • Experience with CNC controls., • Ability to add, subtract, multiply, and divide using fractions, decimals etc., • Metal Forming/Polishing experience is a plus., • Ability to read and understand Blueprints is a plus. -Forklift certified -Manufacturing Experience Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day and occasional lifting, carrying, and maneuvering up to 50 pounds. · Ability to climb ladders, stairs, and platforms for elevated work. · Walking, bending, squatting, kneeling, balancing, stooping, lying down inside or under vessel and twisting while performing required job tasks. · Being mindful of chemical safety and use proper PPE when required. Job Title: Machine Operator Reports To: Shop Supervisor Classification: non-exempt Pay Range: $19.00- $31.50

NC/CNC Machine Set-Up & Operator – 1st Shift \n Location: Syracuse, NY \n Shift: 1st Shift | 6:30 AM – 2:30 PM \n \n We are seeking an experienced NC/CNC Machine Set-Up & Operator to perform machining setups and operations across a variety of machine shop equipment and metal materials. \n \n Key Responsibilities: \n\n • Set up and operate engine lathes, vertical turret lathes, radial/spindle drill presses, shapers, surface grinders, and horizontal/vertical milling machines.\n, • Select appropriate tools, attachments, feeds, and speeds based on material and finish requirements.\n, • Layout and machine production and specialty castings to required tolerances.\n, • Work with steel, iron, brass, bronze, aluminum, and other metals.\n, • Layout, machine, fit, and assemble jigs and fixtures.\n, • Determine machining sequences and perform calculations involving angles, tapers, fits, and dividing heads.\n, • Inspect parts for finish allowance, material defects, and machining issues.\n, • Maintain machines and work areas according to 5S and safety standards.\n\n \n Basic Qualifications: \n\n • High School Diploma/GED.\n, • Minimum 2 years of NC/CNC setup and operation experience.\n, • Must reside within 50 miles of Syracuse, NY; no relocation assistance available. Active-duty military candidates are exempt from the geographic restriction.\n, • Must be legally authorized to work in the U.S. without current or future sponsorship.\n\n

Job Description We are looking for a Maintenance Technician I to join our facilities and manufacturing team at Bluefors in Syracuse, NY. In this entry-level role, you will help maintain production equipment, support preventative maintenance activities, and contribute to keeping our manufacturing environment safe, clean, and operating efficiently. This is an excellent opportunity for someone with mechanical aptitude who enjoys hands-on work, problem-solving, and learning new technical skills in a high-tech manufacturing environment. Interested? Keep reading! Your tasks will include supporting the Maintenance team with production needs, preventative maintenance, facilities support, and special projects. You will perform hands-on tasks such as filling liquid nitrogen transfer dewars and flasks, cleaning vacuum pump traps, removing ice from nitrogen flasks, cleaning and servicing CNC coolant tanks, changing HVAC and air filters, maintaining CNC mist collectors, and assisting with cooling tower and A/C coil cleanings. You will also perform process cooling water filter changes, maintain maintenance records, monitor inventory, and coordinate planned maintenance activities with production managers to minimize disruption to manufacturing operations. Maintaining clean, safe, and organized work areas will be an important part of the role. We are looking for a candidate with a high school diploma or GED and at least six months of maintenance experience. Manufacturing experience is a plus, and strong mechanical aptitude is highly preferred. You should be comfortable reading and interpreting safety rules, operating and maintenance instructions, procedure manuals, and training documents. The ideal candidate will have technical and mechanical abilities, strong communication skills, initiative, and a results-driven approach to completing work. Knowledge of OSHA safety regulations related to machinery and manufacturing environments is a plus. We also appreciate candidates who are dependable, proactive, and willing to learn. Experience supporting preventative maintenance programs, working around manufacturing equipment, or performing basic mechanical and facilities maintenance will help you stand out. A strong commitment to safety, housekeeping, teamwork, and continuous learning is highly valued. Candidates who enjoy hands-on work and take initiative to identify and address maintenance needs will thrive in this role. We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together and support each other. You will have the opportunity to build your technical knowledge and gain valuable experience supporting advanced manufacturing operations. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay Range: $ 22.00-$36.00/hr. (DOE) Main Responsibilities include the following: Support Maintenance with daily production needs Fill liquid nitrogen transfer dewars Fill liquid nitrogen flasks Clean vacuum pump traps Empty ice from nitrogen flasks Support preventative maintenance activities Empty, clean, and fill CNC coolant tanks Change HVAC return air filters Assist with A/C coil cleanings Change air filtration filters Change CNC mist collector filters and clean old filters and reservoir tanks Assist with cooling tower cleanings Support Maintenance with special projects Support Facilities Maintenance during PTO coverage Maintain records relating to planned and completed maintenance Coordinate with production managers to schedule planned maintenance with minimal disruption to production Clean machines, tooling, and parts and perform maintenance as required Monitor and record inventory usage, including tooling, supplies, and raw materials Notify appropriate personnel when supplies or materials need replenishment Perform process cooling water filter changes Maintain proper housekeeping and safety practices Perform additional duties as assigned What We Expect from You High school diploma or GED required Six months of maintenance experience required Manufacturing experience preferred Strong mechanical aptitude highly preferred Technical and mechanical abilities Ability to read and interpret safety rules, operating and maintenance instructions, procedure manuals, and training documents Strong communication skills Results-driven approach to completing assigned work Demonstrated initiative and willingness to take ownership of tasks Ability to follow established safety procedures Commitment to maintaining a clean and organized work environment Ability to work effectively independently and as part of a team Willingness to continue learning and developing technical skills Excellent command of English, both written and spoken We Also Appreciate Knowledge of OSHA safety regulations applicable to manufacturing equipment Experience working in a manufacturing environment Experience with preventative maintenance Experience working with CNC equipment or related manufacturing machinery Experience with HVAC, cooling systems, filtration systems, or industrial maintenance Strong troubleshooting and problem-solving skills A proactive approach to identifying maintenance needs Strong organizational and recordkeeping skills A collaborative, team-oriented mindset Positive attitude and commitment to safety, quality, and continuous learning Physical Demands While performing the duties of this job, the employee is frequently required to stand, reach with arms and hands, and use hands and fingers for detailed maintenance tasks. The employee is occasionally required to walk, stoop, kneel, crouch, or crawl and communicate verbally. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment This position operates in a manufacturing environment and regularly works around moving mechanical parts, production equipment, machinery, tools, and maintenance systems. Employees may occasionally be exposed to humid conditions, fumes or airborne particles, heat, cold, electrical hazards, vibration, and moderately loud noise. Mandatory personal protective equipment (PPE) must be worn as required. Employees are expected to follow all Bluefors safety procedures and maintain a clean, safe, and organized workspace at all times. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job DescriptionDescription: Perform various types of maintenance operations including preventative maintenance & repairs. MONDAY-FRIDAY 6pm-2:30pm OR MONDAY-THURSDAY 1pm-11:30pm Shifts Available ABOUT JAQUITH INDUSTRIES: Jaquith Industries is a family-owned manufacturing company committed to delivering high-quality products, exceptional customer service, and a safe, team-oriented work environment. We take pride in our craftsmanship, reliability, and the long-term relationships we build with our employees and customers. At Jaquith Industries, we believe our people are our greatest asset, and we are dedicated to providing opportunities for growth, stability, and success. We are looking for motivated individuals who value teamwork, dependability, and continuous improvement. If you're seeking a rewarding career with a company that values its employees and invests in their future, we'd love to hear from you. BENEFITS: Jaquith Industries offers a competitive benefits package, including: · Health Insurance - 75% Employer Covered · Life Insurance · 401(k) Retirement Plan · 401(k) Automatic 3% Match · 80 Hours of Paid Time Off (PTO) · 40 Hours of Paid Sick Time · 11 Paid Holidays per Year · Up to $700 Annual Reimbursement for Eligible Dental and Vision Expenses · Stable, Long-Term Employment Opportunities · Overtime is Available, but Not Required · Supportive Team Environment Join a company where your hard work is valued and your contributions make a difference every day Key Responsibilities: • Independently troubleshoot and repair manufacturing equipment, including CNC machinery, laser cutting equipment, welding equipment, and automated systems, within the employee’s training and qualifications., • Maintain and repair mechanical, pneumatic, and hydraulic systems, including bearings, drives, gearboxes, pumps, valves, and cylinders. Perform precision alignment, adjustments, and component replacement., • Troubleshoot industrial electrical components and basic controls using schematics, equipment diagnostics, and PLC input/output information within the employee’s training and authorization. Coordinate advanced repairs with qualified personnel., • Complete preventive maintenance and investigate recurring failures to recommend improvements that reduce downtime., • Assist with equipment installations, relocations, rebuilds, and modifications, including disassembly, inspection, reassembly, and startup testing., • Maintain facility systems and supporting equipment, including compressed air, ventilation, and fume collection systems, and perform routine building repairs., • Document maintenance work, identify repair and spare-part needs, and coordinate priorities and equipment status with maintenance leadership and production personnel., • Follow established safety procedures, including lockout/tagout, verify equipment operation before returning it to production, and provide guidance to Maintenance Technician I employees as assigned. Skills and Qualifications: • Three or more years of industrial maintenance experience preferred; equivalent combinations of training and demonstrated ability will be considered., • Strong mechanical troubleshooting skills and practical knowledge of pneumatic, hydraulic, and basic industrial electrical and control systems., • Ability to independently diagnose and complete routine and moderately complex repairs, interpret manuals and schematics, and use hand tools, precision measuring instruments, and diagnostic equipment., • Experience with CNC machinery, laser cutting equipment, welding equipment, or automated manufacturing systems preferred., • Strong problem-solving, organization, and communication skills, with the ability to maintain accurate records and work safely independently or as part of a team., • High school diploma or equivalent; technical training, apprenticeship experience, or related certifications preferred., • Ability to perform essential physical duties, including lifting, bending, climbing, and prolonged standing, with or without reasonable accommodation. We value a safety-conscious culture and offer opportunities for growth and development within our organization. Join us and be part of a team dedicated to maintaining high standards of quality and operational excellence. Requirements: · High school diploma or general education degree (GED) or 3 years work experience. · Practice good oral and written communication skills. · Participate in training events (ie; Lockout/Tagout; HazCom; and overhead crane training) · Treat all co-workers with dignity and respect. · Possess basic math skills. · Possess basic organizational skills. · Maintain positive attitude towards work and work environment.

Job DescriptionThis position is based at our Syracuse, New York facility with core hours of 2:30pm to 10:30pm. What you’ll do: • Tear down, determine extent of troubles, repair damaged electrical or mechanical mechanism or replace worn or defective parts and reassemble following standard and prescribed safety regulations., • Need a basic understanding of PLC logic and machine programming (Mcode/Gcode), • Adjust equipment to required specification and check to assure effective operation., • Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory., • Perform electrical test operations., • Work from complex schematic diagrams, manuals and testing procedures., • Troubleshoot all defective printed circuit assembly boards., • Perform similar or associated electrical or mechanical duties as directed., • Detect and report all unusual cases to proper supervision., • Use of judgment to comply with instructions or prescribed routines and to make decisions. Qualifications:Required (Basic) Qualifications:, • Journeymen or three (3) years of documented maintenance experience in an industrial electrical/mechanical trade, • Authorized to work in the United States without Company sponsorship., • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse facility (50 miles) will be considered for this position. Preferred qualifications: • Four (4) years or more of documented maintenance experience in an industrial electrical/mechanical trade preferred, • Background in machining and electrical equipment, • Two year degree in electronics with mechanical experience/Military electronics experience., • Experience with hydraulics SKILLS AND CERTIFICATIONS [note: bold skills and certification are required] basic understanding of PLC logic and machine programming (Mcode/Gcode) Journeymen or three (3) years of documented maintenance experience in an industrial electrical/mecha

Industrial Regional Sales Manager Remote, Charlotte, NC Our client is a growth-focused industrial solutions company expanding its presence across the Southeast and looking for a driven technical sales professional to help capture a significant underserved market opportunity. This is an opportunity for a true hunter who wants ownership of a territory, the resources to solve real customer challenges, and uncapped upside for creating new business. With an expanding product portfolio, continued investment in growth, and strong demand across industrial and capital project environments, the Industrial Regional Sales Manager will have considerable runway to build relationships, win new accounts, and grow alongside the organization. This Role Offers: • Competitive base salary plus an uncapped commission structure with meaningful upside for exceeding plan., • Ramp support designed to help the new hire establish momentum during the first two quarters., • Growing product portfolio and an organization actively investing in additional market expansion., • Collaborative sales environment that rewards initiative, preparation, technical curiosity, and results. Focus: • Build and execute a focused regional growth strategy targeting high-value accounts, channel partners, industrial projects, and new market opportunities., • Generate new revenue through proactive prospecting while expanding productive relationships with existing customers and distribution partners., • Develop trusted relationships with plant managers, project managers, contractors, distributors, and other technical or capital-project decision-makers., • Serve as a consultative technical resource, identifying customer requirements and recommending practical system solutions., • Manage opportunities from initial outreach and discovery through quoting, negotiation, and close, including longer-cycle project sales., • Prioritize accounts and sales activity based on market potential, using disciplined territory planning to maximize productive field time., • Collaborate with internal teams while monitoring competitive activity, customer needs, pricing dynamics, and emerging growth opportunities., • Maintain accurate CRM, pipeline, and forecast information while traveling throughout the Southeast to develop customer relationships and territory growth. Skill Set: • Minimum 5 years of outside industrial or channel sales experience, with demonstrated success developing decision-maker relationships and closing complex deals., • Strong technical aptitude and consultative selling capability with industrial equipment, engineered systems, or other application-driven products., • Compressed air experience is highly desirable, with adjacent experience in automation, CNC equipment, mechanical systems, piping, or similar technical solutions also considered., • Proven hunter mentality with the initiative to create new opportunities rather than primarily manage an inherited customer base., • Demonstrated territory planning discipline, including the ability to prioritize accounts, manage time strategically, and execute a focused growth plan., • Experience selling through or alongside distributors, contractors, project teams, plant managers, and other industrial stakeholders., • Self-directed and comfortable managing a remote territory with significant travel, while bringing strong communication, negotiation, relationship-building, and CRM skills., • Collaborative, accountable, and growth-oriented approach, with a bachelor's degree in business, sales, marketing, or a related discipline preferred. About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

Job Description Job Description: We are currently seeking a Sheet Metal Worker to join our metal shop team. • Use press brake, rollers, spot welders, rotary machines, and hand tools to fabricate sheet metal into functional parts for continued manufacturing or finished product., • Run equipment in balancing and forming area to create functional parts for continued manufacturing or finished product. Equipment includes mills, balancer, drill press, hand drills, pneumatic tools, and flanging machine. Expectations of the position: • Meet company standard times and produce high quality parts., • Willing and able to work OT as needed., • Be willing to work on any equipment or any job in the department as requested., • Work well in a fast-paced team environment., • Must like to work with their hands and be comfortable around machinery., • Candidates must be able to lift up to 50 lbs. without assistance, and team lift to 100 lbs., • Carry out tasks issued by manager or designate., • Comply with all safety regulations and recommendations., • Reinforce and role model company values, including excellent customer service., • Able to appropriately and effectively communicate with co-workers, customers, and managers., • Perform other duties as assigned. Education & Previous Experience Requirements • High School Diploma or (GED)., • Required: Minimum of 3 years of previous work experience, • Preferred: 2 years’ previous fabrication, machining, and/or operation of CNC equipment (rollers, brakes, etc.) experience Additional Information • Job Type: Full-time, • Pay: $19.00 - $23.00 per hour, • Shift availability: Day shift (required), occasional overtime available, • Work location: In person, • Benefits: 401(k) with company match, health, dental, vision, company provided life, AD&D, and long-term disability insurance, supplemental insurances available, EAP program, pet insurance and pet wellness programs, discount programs, vacation and sick time, 8 paid holidays per year, and monthly/annual bonus potential based on company performance Please note that the posted pay range is a good faith estimate and may vary within the range based on qualifications such as experience and education level. It is Oneida Air Systems’ policy to provide equal employment opportunity to all qualified individuals. We are committed to employing a diverse workforce and all personnel actions taken are based on merit and business needs. We value all employees’ talents and support an environment that is inclusive and respectful. We are strongly committed to this policy and believe in the concept and spirit of the law. \nCompany Description Oneida Air Systems, founded in 1993, is the market leader in the design and manufacturing of dust collection systems. Our hard work and innovation have produced the best dust collection systems and products which are made right here in Syracuse, NY, that improve the safety and health of the customer’s current environment. Oneida Air Systems, founded in 1993, is the market leader in the design and manufacturing of dust collection systems. Our hard work and innovation have produced the best dust collection systems and products which are made right here in Syracuse, NY, that improve the safety and health of the customer’s current environment.

Job Description CNC Machinist Set Up 1st Shift Monday – Friday 6:00am – 2:30pm $20 - $25 per hour DOE Job Duties • Set up and operate one or more of a variety of CNC Machines, • Troubleshoot CNC issues as they may be related to set-up as necessary, • Use a variety of hand inspection tools such as micrometers, calipers, indicators, etc., • Notify the supervisor of any operations problems, • Study work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces and machining parameters Requirements • Technical, BOCES, or high school graduate with experience in blueprint reading, using measuring instruments, and manual or CNC machine center operation or equivalent, • 3 years’ experience setting up CNC Machines, preferably horizontal milling machines, • Ability to read prints, diagrams and use micrometer, verniers, calipers and gauges, • Strong attention to detail Apply now for consideration!

Job DescriptionCNC Machine OperatorPay: $19.00-$21.00/hour depending on experience Hours: 6:30am - 3:00pm Staffworks is seeking a reliable CNC Machine Operator to join their award-winning team! What's in it for you? • Temp to Hire, • NY State Sick Pay, • Great Company CNC Operator Details: • Operate five CNC lathes working from written program, • Perform selected setup operations, adjust and complete tooling repairs, • Use all gauges and interpret prints, and all hand tools required Position Title Qualifications: • 2+ years’ work experience in a Machining Department within a Manufacturing setting, • Previous experience in CNC department, • Basic math skills, including ability to use micrometers and other measuring devices, • Ability to read and interpret drawings, • Proficiency in the English language skills We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization.How to Apply: www.staffworkscny.com (315)455-9675 "INDITES"

Job Description CNC Programmer 1st Shift Hours TBD $20 - $28 per hour DOE Job Duties • Creates medium to high complexity CNC programs using three axis CAM software, • Stores and maintains programs with Living History, • Provides CAM support, downloads programs to CNC controls, makes initial set up, obtains first piece approval, and turns over production of part to operator, • Optimize programs for speed of machine time and improved quality, • Diagnoses, analyzes, and troubleshoots programs, • Creates wire or surface geometry using CAD software Requirements • A.AS in Mechanical technologies or equivalent, • Demonstrates ability to program and machine complex geometries, • Four years of CNC programming experience preferred, • Must have superior computer programming skills, • Problem solving skills, • Time management skills, • Organizational skills, • Must be mechanically inclined Apply now for consideration!

Job DescriptionDescription: Job Summary: A CNC Programmer is responsible for writing and optimizing programs for CNC Machines, interpreting blueprints and ensuring precision in manufacturing process. Essential Functions of Position: · Programming CNC Machines: Write and optimize CNC programs to guide machines in performing tasks such as cutting, milling and drilling according to engineering specifications · Blueprint Interpretation: Read and interpret technical drawings and blueprints to create CNC programs. · Machine Set up and Operation: Set up machine, load raw materials, and adjust machine settings as needed. · Testing and Quality Control: Makes necessary adjustments to ensure efficiency and quality of the final products. Ability · Code Development: Translating programming logic into machine-readable format using a specific programming language. · Software Maintenance: Modification of software after delviery · Collaboration: Work closely with engineers and machinist to evaluate project requirements and resolve any issues related to machine set up or program performance. · Testing and Debugging · Documentation: Maintain records of machine specifications, programming notes and production processes · User Support Required Skills and Qualifications: · A degree in computer science, software engineering, or related field. · Programming Proficiency: Strong knowledge of various programming languages and frameworks · Problem Solving Skills: Ability to analyze problems and develop effective solutions · Experience: Previous experience as a CNC Programmer or in a similar role is typically required. · Attention to detail: Detail-oriented with strong organizational and multitasking abilities. · Technical Skills: Proficiency in Mastercam, software and solid understanding of blueprints and technical drawings are essential · Communication Skills: Excellent verbal and written communication skills to collaborate effectively and efficiently with your team members Physical Requirements: · Ability to stand and/or walk for up to 8 hours per day. · The ability to work on a computer for up to 8 hours a day. · Being mindful of safety and use proper PPE when required. Requirements: This position requires an individual of focus, professional mannerism, mathematical skills, Blueprint comprehension, comprehension of written and verbal instructions. Use CAM software and machine software to write code for part production within a reasonable time frame. • Determine best machine, strategy, tools, and work holding to complete part., • Determine best Feeds and Speeds based on tooling manufacture recommended data or expert experience., • Document Tooling used in the form of a Tool list/Set up sheet with designated Pot/Turret positions. (Tool type, nose radius, RH/LH, Holder projection, Program name/part number, and any other pertinent information for Machine Operators) This should be in the form of paper document for the shop floor and electronic format, stored in the program folder., • Log into MES under Job number before you start the job. Note “Programing/setup” upon completion of job. Work independently to set up Machine Tool and run First Article. • Set up Tooling, load program, and prove effectiveness of your programing. Make immediate changes and update documentation immediately if necessary., • Verify dimensional accuracy and required surface finishes of part produced., • Clean and debur parts as necessary., • Note and document tool life per part. Recommend insert or tooling change out intervals. Maintain documentation, Job Travelers, and Part Identification. • Label Parts with required documentation., • Call for Quality Control as necessary., • Move completed and approved parts to next staging area., • Close your job in MES when completed. Instruct Machine Operator on your developed process and all pertinent information. • Pass on all important information., • Make sure Machine Operator has the Job Traveler and required paperwork., • Note and advise inspection interval. 100% inspection, every other part, every 5 parts, ETC. (This is at your discretion. You are responsible for the parts produced from your developed process! Keep all areas where you work clean and organized. • Put tools away. Remove all trash., • Remove all Scrap materials., • Store any tools or tooling removed from machine during setup. ·Research any special Tooling you may need for a job and request a quote. • If special tooling is needed, research the best option and request a quote from the appropriate vendor. CC your manager for approvals and ordering., • *These responsibilities can and will be updated and then recommunicated as we grow our team.

Job Description Armstrong has an opening for a first shift CNC Programmer. Armstrong Rapid Manufacturing has been in business for over 50 years in the East Syracuse NY area. Armstrong specializes in both prototyped and low volume production machined castings. Armstrong has a benefit package that includes paid holidays, bonus and referral programs, paid vacation, 401K, 100% company paid life insurance, sick time, supplemental short term disability insurance, dental, medical, accident, safety awards, cancer and critical care insurance. We also provide free coffee daily for our employees available at multiple coffee kiosks. Our website is www.armstrongrm.com and it shows many of the exciting aspects of our company! Take a look! The Salary Range for our non-exempt CNC Programmer job is $35.00-$40.00 per hour with the job description below: Summary/Objective: The CNC Programmer prepares detailed manufacturing instructions and programming data to produce machined parts and sub-assemblies using horizontal and vertical CNC machining centers to meet engineering drawings and specifications. The CNC Programmer determines manufacturing procedures and operation sequencing and establish tooling, gauging, and machine requirements to fabricate parts and sub-assemblies for various products, primarily from aluminum castings with some aluminum billet machining. In addition, the CNC Programmer spends time in the machine shop solving problems and improving processes in a team environment. Job Responsibilities • Creates medium to high complexity CNC programs using three+ axis CAM software., • Works offline to produce a robust CNC program maximizing software capabilities that will simulate accurately at the PC avoiding collisions and excess time at the work center., • Provides CAM support, downloads programs to CNC controls, makes or supports in the initial set up/prove out, obtaining of first piece approval and turns over production of part to operator., • Diagnoses, analyzes, and troubleshoots programs., • Assures compatibility of engineering drawings and specifications with manufacturing and fabrication capabilities by reviewing drawings and making suggestions for changes and revisions to enhance productivity., • Reprocesses and/or modifies existing programs for increased efficiency and productivity., • Originates studies directed towards more efficient manufacturing of parts. Including recommendations for changes in equipment, process methods, materials, and designs., • Works with Quality to create a robust CMM/manual inspection process., • Completes and/or maintains required reports and records i.e. CNC tooling lists., • Creates work and setup instructions for machinists., • Checks completed programs/changes by running simulations prior to posting code., • Ensures correct speeds and feeds based on manufacturer cut data., • Proactively supports the ISO process approach to quality management per our system requirements., • Adheres to all safety policies and practices, consistently uses personal protective equipment and practices good housekeeping., • Maintains regular on-time attendance and adheres to company policies, procedures, and standards of conduct., • Maintains a positive professional approach with all internal and external controls., • Applies classroom and on the job post training information, knowledge, skills, and abilities consistently in a quality-oriented manner (wherein the KSAs are part of the jobs tasks, duties and other tasks as requested)., • Willingness to do other tasks as required. Educational, Experience Based, and Skill Qualifications A.A.S in Mechanical technologies or equivalent work experience and demonstrated ability to program and machine complex geometries. Four (4) years of CNC programming experience desirable preferably with Master Cam. • Must have superior computer programming skills., • Must have excellent reading comprehension skills., • Good math skills, especially algebra, trigonometry, and physics., • Must have good problem-solving skills., • Must have excellent time management skills., • Must have good organizational and planning skills., • Must have excellent written and verbal communication skills., • Must be highly detail oriented., • Must be able to work effectively with little or no supervision., • Must have the ability to read blueprints., • Knowledge of safety measures pertinent to each job assignment Physical Requirements A combination of walking and sitting at a desk for prolonged periods of time. Must be able to lift up to and including 35 pounds as needed. EEO Statement Armstrong Mold Corporation is committed to equal opportunity, to providing a work environment that is free from unlawful discrimination and will not discriminate with regard to race, religion, color, national origin, sex,gender, gender identity or expression, sexual orientation, age, veteran status, disability, genetic information, or any other protected status. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, gender, gender identity or expression, sexual orientation, age, veteran status, disability, genetic information, or any other protected status. Armstrong Mold Corporation is proud to be an Equal Opportunity Employer (EOE). Armstrong Mold Corporation will make reasonable accommodation(s) for qualified applicants with disabilities and employees* If you are interested in applying for employment and feel you need a reasonable accommodation to apply for a posted position, or are an employee with a question contact Human Resources at 315-437-1517 or by email to hr@armstrongrm.com. • unless an employee reasonable accommodation would result in undue hardship. Job Posted by ApplicantPro

Job Description1st Shift Pattern MakerHours: 6am-2:30 Days: Monday - Friday Pay: 15-25 per hour depending on experience Staffworks is seeking a reliable Pattern Maker to join their award-winning team! What's in it for you? Great Starting Rate Weekly Pay Temp to Hire Opportunity Pattern Maker Details: • Lays out and constructs complex models and molds using blueprints, master patterns and stereo models to build molds, rubber resin tooling, determine joints and parting, add draft filets and radii, etc., • Plans sequence of operations, • Using three axis CAM software, interprets files, programs CNC machines and prep CAD files, • Sets up and operates a wide variety of machinery such as lathes, drills, milling machines, CNC machines, etc. as required, • Grinds, files and sands parts for assembly of a smooth and finished cavity, • Rigs molds as required, • Builds fixtures and templates, • Monitors tooling for wear and breakage and replaces as necessary., • Performs routine machine maintenance., • Adds stock to models to allow for machining tolerances, • Coaches and trains employees as requested, • Meets quality and quantity standards for the position., • Proactively supports the ISO process approach to quality management and the Syteline MIS system. Pattern Maker Qualifications: High school diploma or equivalent or Trade School graduate with training in shop math, blueprint reading and machine set-up Completion of a Pattern Maker apprenticeship Five (5) years of experience Must be able to lift up to and including 35 pounds as needed. We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization.How to Apply: www.staffworkscny.com (315) 455-9675

Job Description CNC Operator $18.00-$20.00 per hour DOE Essential Job Duties and Responsibilities • Maintains safe operations by adhering to safety procedures and regulations., • Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, and machining parameters., • Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments., • Prepare and load raw materials and parts onto the machines., • Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result., • Check and maintain machinery daily to ensure functionality. Education and Experience • Millwork experience preferred., • One to Three years’ experience in manufacturing and CNC operation., • High School diploma or equivalent, • Computer skills Requirements • Proper personal protective equipment is required to be worn when in the warehouse and factory., • Ability to lift over 50 lbs., • Ability to work overtime and including weekends when needed. Apply now for consideration!

Job Description Armstrong has an opening for a second shift CNC Machinist 1. Armstrong Rapid Manufacturing has been in business for over 50 years in the East Syracuse NY area. Armstrong specializes in both prototyped and low volume production machined castings. Armstrong has a benefit package that includes paid holidays, bonus and referral programs, paid vacation, 401K, 100% company paid life insurance, sick time, supplemental short term disability insurance, dental, medical, vision, accident, cancer and critical care insurance plus safety awards. We also provide free coffee daily for our employees available at multiple coffee kiosks. Our website is www.armstrongrm.com and it shows many of the exciting aspects of our company! Take a look! The Salary Range for our CNC Machinist 1 job is $27.00-$36.00 per hour plus an additional 10% 2nd shift premium when going onto 2nd shift with the job description below: Summary/Objective: Responsible for producing precision-machined components by setting up and operating horizontal or vertical CNC (Computer Numerical Control) machining centers. Ensures strict adherence to quality, documentation, and safety standards. Must possess the ability to optimize machining processes for enhanced efficiency and precision. Job Responsibilities • Interpret blueprints and work instructions to set up and operate 3 & 4-axis CNC mills with the correct fixturing, tooling and parameters to produce compliant precision machined parts., • Verify machined part accuracy through precision measuring tools and equipment using the documented quality plan., • Troubleshoot machining issues and make real-time adjustments to improve performance and accuracy., • Train and mentor junior machinists, sharing knowledge and best practices., • Maintain detailed production records and comply with quality assurance and safety protocols., • Perform routine maintenance and troubleshooting on machines to prevent downtime., • Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs., • Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs., • Adheres to all safety policies and procedures, consistently uses personal protective equipment and practices good housekeeping, • Maintains regular on time attendance and adheres to company policies, procedures, and standards of conduct., • Performs other tasks as directed. Educational, Experience Based, and Skill Qualifications • Minimum of 7 years CNC machining experience in set-up, operation, and optimizing CNC vertical and horizontal machine centers, • Strong understanding of CNC machining and programming principles, • Ability to edit and or write basic machining macros, • Ability to quickly identify and troubleshoot machining problems during the approval or production process, • Ability to read and interpret blueprints with a solid understanding of Geometric Dimensioning and Tolerancing (GD&T), • Strong attention to detail., • High school diploma or equivalent Physical Requirements Ability to walk, remain on feet for extended time periods, reach, stoop. Kneel and lift up to an including 35 pounds as needed. AAP/EEO Statement Armstrong Mold Corporation is committed to equal opportunity, to providing a work environment that is free from unlawful discrimination and will not discriminate with regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, veteran status, disability, genetic information, or any other protected status. Armstrong Mold Corporation is proud to be an Equal Opportunity Employer (EOE). Armstrong Mold Corporation will make reasonable accommodation(s) for qualified applicants with disabilities and employees* If you are interested in applying for employment and feel you need a reasonable accommodation to apply for a posted position, or are an employee with a question contact Human Resources at 315-437-1517 or by email to hr@armstrongrm.com. • unless an employee reasonable accommodation would result in undue hardship. #ZR Job Posted by ApplicantPro

Job Description CNC Programmer 1 Location: Syracuse, NY Schedule: Monday–Friday, 7:00 AM–3:30 PM Pay Rate: $40.00 per hour Employment Type: Full-Time Job Summary We are seeking a highly skilled CNC Programmer 1 to join our manufacturing team. This is the highest-level CNC Programmer position and is ideal for an experienced programmer who enjoys challenging work, complex machining, and solving manufacturing problems. The role supports both prototype and production machining, including developing new CNC programs for prototype parts as well as maintaining and optimizing programs for ongoing production orders. The successful candidate will use Mastercam to create and optimize CNC programs for horizontal and vertical machining centers, primarily working with aluminum castings and billet materials. Key Responsibilities • Create medium- to high-complexity CNC programs using 3+ axis CAM software, primarily Mastercam., • Develop new CNC programs for prototype and first-time production parts., • Modify, optimize, and maintain existing programs for ongoing production work., • Work offline to create robust programs and simulate machining operations to identify potential collisions and improve cycle times., • Download programs to CNC controls and support machine setup, prove-outs, and first-piece approvals., • Troubleshoot and resolve CNC programming and machining issues., • Review engineering drawings and specifications to ensure manufacturability., • Recommend improvements to machining processes, tooling, equipment, materials, and part designs., • Establish tooling, gauging, and machine requirements., • Create setup instructions and work instructions for machinists., • Verify CNC programs and changes through simulation before releasing them to production. Required Qualifications • 4+ years of CNC programming experience preferred., • Strong hands-on CNC programming and machining experience., • Mastercam experience is strongly preferred., • Demonstrated ability to program and machine complex geometries., • Experience with 3+ axis CNC machining. Physical Requirements • Ability to spend time both at a workstation and on the manufacturing floor., • Ability to lift up to 35 pounds as needed., • Ability to safely work in a manufacturing environment and follow required PPE and safety procedures.

Job Description Our client, manufacturing is seeking a Fabricator to join their team. As a Fabricator, you will be part of the production team supporting day-to-day fabrication and metal forming operations. The ideal candidate will have strong attention to detail, a solid understanding of CNC programming, and the ability to read and interpret engineering drawings which will align successfully in the organization. Job Title: Fabricator Location: East Syracuse, NY Pay Range: Depending on experience Shift: 6am-230pm, with possible overtime What's the Job? • Program, set up, and operate a LVD 6kW Puma fiber laser using Cadman software to support production requirements., • Create, edit, and optimize CNC programs for a Trumpf punch press to ensure accurate, efficient output., • Set up and operate Amada press brakes for forming operations., • Operate Haeger hardware insertion machines for installation of fasteners., • Work a 6:00am–2:30pm Monday–Friday schedule with some overtime as needed. What's Needed? • 2+ years of CNC programming experience., • Ability to read and interpret engineering drawings., • Experience programming and operating laser, punch press, and/or press brake equipment., • Comfort working with CAD/CAM-style workflows and CNC software tools (Cadman experience is required for the laser role)., • Willingness to support production schedules, including some overtime when required. What's in it for me? • Opportunity to contribute directly to fabrication and production output using advanced CNC equipment., • A Monday–Friday schedule with a consistent daytime shift (6:00am–2:30pm)., • Hands-on role across multiple fabrication processes, including laser cutting, punching, forming, and fastener insertion., • Clear expectations centered on programming, setup, and interpretation of engineering drawings., • Pay depending on experience. Upon completion of waiting period associates are eligible for: • Medical and Prescription Drug Plans, • Dental Plan, • Supplemental Life Insurance, • Short Term Disability Insurance, • 401(k) If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells. Manpower® is a global leader in contingent staffing and permanent resourcing, providing companies with strategic and operational flexibility and creating talent at scale. Our specialized recruiting teams assess and guide talent into meaningful, sustainable employment, while our PowerSuite technology enables deeper insight and smarter matching, helping candidates find opportunities that align with their strengths, experience, and career goals. In this constantly shifting world, our flexible workforce solutions provide companies with the business agility needed to succeed. Manpower is part of the ManpowerGroup® (NYSE: MAN) family of brands, which also includes Experis, Talent Solutions and Jefferson Wells. For more information about Manpower, follow us on LinkedIn, Facebook, X and Instagram.

Job Description Company Summary Our client is a growing industrial automation and systems integration company that designs, builds, and commissions automation solutions for manufacturers across a variety of industries. The organization works with PLCs, robotics, collaborative robots, conveyors, machine interfaces, sensors, controls, and other industrial automation technologies. The company is expanding its automation capabilities and is looking to add an experienced controls professional who can contribute to projects from programming and integration through installation and commissioning. This is an opportunity to join a growing team where the individual will have meaningful technical responsibility and the potential to grow into a broader leadership role as the business expands. Job Summary The PLC Programmer / Automation Integration Engineer will be responsible for programming, integrating, troubleshooting, and commissioning industrial automation systems. This position will have a strong emphasis on PLC programming and controls while also involving robot and collaborative robot integration, machine communication, HMI development, networking, sensors, motion control, and system troubleshooting. The ideal candidate is a hands-on automation professional who enjoys solving complex technical problems and working directly with equipment and customers. The ability to work across multiple automation platforms is more important than having deep expertise in one specific manufacturer or technology. The position is based in Syracuse, New York, with some flexibility for remote work when project requirements allow. The individual will spend time at the company's facility as well as customer sites during installations, commissioning, troubleshooting, and project implementation. Responsibilities • Program and modify PLC control systems using Ladder Logic, Structured Text, SFC, and other IEC 61131-3 programming environments., • Develop and modify HMI/SCADA applications for machine operation, diagnostics, alarms, recipes, and system monitoring., • Integrate industrial robots and collaborative robots into automated production systems., • Configure and troubleshoot communication between PLCs, robots, cobots, CNC machines, conveyors, HMIs, sensors, drives, and other equipment., • Integrate industrial networks and communication protocols including EtherNet/IP, EtherCAT, Modbus TCP, and similar technologies., • Configure and troubleshoot servo drives, VFDs, motion systems, and high-speed I/O., • Configure robot signals, sensors, pneumatic systems, safety devices, machine interfaces, fixtures, and other field I/O., • Assist with control system design, I/O development, electrical schematic review, device selection, and panel checkout., • Commission automation systems both internally and at customer facilities., • Troubleshoot mechanical, electrical, controls, networking, and software issues and determine root causes., • Perform PLC upgrades, machine communication improvements, controls modifications, and automation retrofits., • Provide technical support during customer installations and production startups., • Configure remote-access systems and provide remote troubleshooting support when appropriate., • Document PLC programs, network configurations, startup procedures, and system modifications., • Train customer maintenance and technical personnel on equipment operation and troubleshooting., • Work directly with customers to understand technical requirements and develop practical automation solutions., • Support technical sales activities, project planning, site assessments, and customer meetings when needed., • Develop reusable programming standards, function blocks, templates, and other tools to improve future projects., • Travel to customer locations for project assessments, installations, commissioning, and troubleshooting. Requirements • 3+ years of hands-on PLC programming experience in an industrial automation, controls, manufacturing, or systems integration environment., • Strong practical understanding of industrial automation and controls., • Experience programming PLCs and troubleshooting control systems in a production environment., • Working knowledge of IEC 61131-3 programming environments, including Ladder Logic and/or Structured Text., • Experience integrating PLCs with robots, machines, conveyors, HMIs, sensors, drives, and other industrial equipment., • Working knowledge of industrial communication and networking, particularly EtherNet/IP and/or EtherCAT., • Ability to read electrical schematics and troubleshoot control panels using appropriate diagnostic equipment., • Experience with servo drives, VFDs, motion control, or related automation technologies., • Strong troubleshooting and problem-solving skills with the ability to independently research issues and identify root causes., • Ability to work comfortably on the plant floor and directly with machinery and automation equipment., • Strong communication and interpersonal skills with the ability to interact professionally with customers, operators, maintenance personnel, and engineering teams., • Ability to manage projects and technical assignments with a high degree of independence., • Willingness and ability to travel approximately 25–40% for customer projects., • Valid driver's license and ability to travel throughout the United States., • Ability to work in a hands-on environment involving equipment installation, startup, testing, and commissioning. Preferred Requirements • Experience programming or integrating collaborative robots or industrial robots., • Experience with FANUC, Universal Robots, Doosan, or similar robotic platforms., • Experience with palletizing, packaging, material handling, machine tending, or conveyor automation., • Experience with CODESYS-based platforms, Rockwell Studio 5000, Siemens TIA Portal, Beckhoff TwinCAT, Panasonic, or similar PLC platforms., • Experience with vision systems such as Cognex, Keyence, or robot-integrated vision., • Experience with end-of-arm tooling, pneumatic systems, vacuum systems, and robotic grippers., • Experience with safety PLCs, safety-rated devices, machine guarding, and industrial robot safety standards., • Experience with remote-access systems, VPNs, industrial networking, or OT network architecture., • Experience with edge devices, industrial PCs, or gateway technologies., • Robot manufacturer certifications or formal robotics training., • Associate's or Bachelor's degree in Electrical Engineering, Electrical Technology, Mechatronics, Computer Engineering, Computer Science, or a related technical discipline., • Experience developing reusable PLC code, function blocks, programming standards, or automation libraries., • FANUC training or certification is a plus; additional training may be provided. Compensation & Benefits • Salary: $90,000–$110,000, depending on experience and capabilities., • Performance or project-based bonus opportunity., • Possible monthly vehicle/car allowance., • Company-paid business travel and travel-related expenses., • Health, dental, and vision insurance., • 401(k) with company match., • Paid time off and company holidays., • Company laptop, tools, and equipment necessary to perform the role., • Training and certification opportunities on new automation, robotics, and controls platforms., • Opportunity for increased responsibility and advancement as the automation business continues to grow. Location Syracuse, New York This is a primarily on-site position. The successful candidate will need to be available to work with automation equipment at the company's Syracuse-area facility and travel to customer locations for project implementation, installation, commissioning, and troubleshooting. Travel is expected throughout New York and the Northeast, with additional projects potentially requiring travel to the Southeast and other locations within the continental United States. Some remote work may be possible when project requirements permit. Typical customer assignments may include an initial site visit to assess the application and develop an implementation plan, followed by an installation and commissioning period. Travel frequency will vary based on the project schedule, with some assignments requiring overnight stays.

Job DescriptionDescription: Summary Sets up and operates computer numerical control lathes/mills to perform various machine functions such as turning/facing/drilling/milling/reaming/boring/tooth cutting/threading of parts such as castings/forgings/bar stock/other machined parts Specific Duties and Responsibilities: · Reads/interprets blueprints/planning sheets/sketches/related technical data to determine tooling requirements/set-up procedures/control settings/machining methods/sequences · Mounts/aligns and secures tooling/attachments and work piece on machine · Selects/installs required tooling in designated machine positions · Assembles/presets tooling for next sequence or job during automated cycle in order to minimize machine changeover or down time · Enters commands to retrieve preprogrammed instructions from database or when necessary modifies existing programs or creates new programs necessary to efficiently produce parts meeting specification/quality requirements · Calculates/sets machine controls to position tooling in relationship to work piece and to regulate factors such as cutting depth/speed/feed/coolant flow · Starts machine/monitors displays and machine operation to detect malfunctions · Operates machine on preliminary dry run before machining first part to detect errors in program/tooling placement · Manufactures first part/secures first piece approval before commencing production run · Verifies conformance of finished parts to specs/maintains records required by control plan · Deburrs all work · Stops machine to change tools and setup according to required machining sequence or to measure parts for conformance to blueprint specs · Enters commands or manually adjusts machine controls to correct malfunctions/out-of-tolerance machining · Operates machine manually to perform non-automated functions/when programming is faulty or machine malfunctions · Cleans machine/tooling parts/work area at completion of job/end of day · Performs machine maintenance according to designated schedule · Other duties as assigned Requirements: Education and Experience: • 5 years’ experience in First Class Machinist capacity Preferred, • High school diploma or equivalent required

Job Description Job Overview: 110 Metalworks is seeking a hands-on individual with a strong CNC machining background to provide technical leadership and manufacturing support across CNC machining, sheet metal, welding, and assembly operations. This role works closely with production department leaders and their teammates to improve manufacturing processes, troubleshoot production challenges, provide input on manufacturability reviews, and drive continual improvement initiatives. Working across the organization, this role also partners with estimators, programmers, and engineering teams to provide manufacturing input and support problem-solving efforts. Our success is built on caring, collaboration, and learning together through continual improvement. Primary Responsibilities: Production Floor Technical Support • Provide daily manufacturing and machining support to production departments, • Troubleshoot machining, tooling, setup, and process related issues, • Support new job launches, prove-outs, and first article production, • Assist with tooling selection, cutting strategies, and fixture concepts, • Work directly with operators, programmers, and supervisors to resolve manufacturing challenges Manufacturing Process Improvement • Identify and implement process improvements to increase efficiency and reduce waste, • Support setup reduction initiatives and standardization efforts, • Lead continual improvement projects across production operations, • Develop and improve manufacturing methods and best practices Cross-Functional Manufacturing Support • Support estimators with manufacturing input on complex parts and customer opportunities, • Support engineering teams with manufacturability reviews and production planning, • Provide manufacturing input during contract review and production readiness activities, • Provide technical support to CNC milling and turning programmers Requirements Qualifications: • Minimum 7–10 years of manufacturing experience, • Strong CNC machining background required, • Experience with CNC programming preferred, • Knowledge of tooling, fixturing, workholding, and manufacturing methods, • Ability to troubleshoot complex manufacturing issues, • Strong communication, collaboration, and problem-solving skills, • Continual improvement and lean manufacturing experience preferred Desired Experience: • CNC Milling and Turning, • Experience supporting production floor operations, • Manufacturing Engineering, • Process Improvement, • Tooling Development, • Fixture Design, • Estimating and Manufacturability Reviews, • Assembly Manufacturing Processes, • Root Cause Analysis, • Continual Improvement Initiatives · Key Success Factors: • Strong hands-on approach, • Highly visible and engaged on the production floor, • Ability to work across departments, • Practical technical problem solver, • Team-oriented mindset, • Focus on improving efficiency, quality, and overall manufacturing performance Physical Demands: Frequent walking and standing throughout the manufacturing facility to support production operations. Occasional bending, stooping, kneeling, crouching, reaching, and climbing stairs. Ability to lift and carry up to 50 pounds occasionally. Frequent visual focus required for inspecting parts, reviewing technical drawings, machine setups, tooling, and computer screens. Ability to work in a manufacturing environment with exposure to machine noise, moving equipment, metal chips, cutting fluids, and varying temperatures. 110 Metalworks Inc. is an EEO Employer - M/F/Disability/Protected Veteran Status Work Location: In person Benefits Pay: $36.00 - $43.25 per hour 110 Metalworks Inc. is an EEO Employer - M/F/Disability/Protected Veteran Status Work Location: In person

Job Description Title: Service Engineer Reports to: Service Expert Coordinator Location: DMG MORI TC Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 50% Annual Base Salary Range: $83k+ (variance in base salary offer will depend on experience level/skill set) Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Other duties as assigned. Minimum Requirements: • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job Description We are looking for a CNC Machine Operator I to join our manufacturing team at Bluefors in Syracuse, NY. In this role, you will support the production of precision components used in advanced cryogenic systems that power breakthroughs in quantum technology, scientific research, and other cutting-edge industries. This is an excellent opportunity for someone who enjoys hands-on machining work, takes pride in quality craftsmanship, and wants to grow within a collaborative, high-tech manufacturing environment. Interested? Keep reading! Your tasks will include operating CNC machines and machining centers to fabricate metallic and nonmetallic parts that meet quality and production standards. You will load raw materials into machines, inspect finished parts according to established procedures, and perform quality inspections of first-piece parts as verified by a supervisor or quality technician. You will troubleshoot machine operations, monitor machining performance, and adjust as necessary to ensure parts remain within specifications. In addition, you will use measuring tools daily, clean and deburr finished parts, monitor inventory levels for tooling and materials, and maintain a clean and organized workspace. You will also support machine maintenance activities and complete ongoing training requirements to support technical growth and continuous improvement. We are looking for a candidate with a high school diploma or GED and at least one year of manufacturing experience, or a one-year technical certificate with related experience, or an equivalent combination of education and experience. You should have the ability to set up and use measuring tools and read and interpret blueprints, with GD&T knowledge considered a plus. The ideal candidate will have strong attention to detail, the ability to follow procedures accurately, and a commitment to producing high-quality work. Familiarity with g-code programming and CNC machining processes is important, and CNC programming experience is a plus. You should be dependable, safety-conscious, and able to work effectively both independently and as part of a team. We also appreciate candidates who demonstrate strong mechanical aptitude and a proactive approach to troubleshooting and problem-solving. Experience working in a manufacturing environment focused on quality and precision machining will help you stand out. A willingness to continue learning and developing technical skills, along with a team-oriented mindset and strong organizational skills, is highly valued. Candidates who align with our values of quality, collaboration, continuous learning, and safety will thrive in this role. Fifth paragraph We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together and support each other. We foster a multicultural work environment with room to grow, where you can use your potential and further develop your skills. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay range: $19.25-23.07/hr. Main Responsibilities include the following: Operate CNC machines and machining centers to fabricate required parts Use qualified measuring tools on a daily basis Feed and load raw materials into CNC machines Inspect parts according to established policies and procedures Troubleshoot machines and maintain machine operations Monitor machine operation and adjust controls as required Detect machine malfunctions and worn or damaged tooling Perform inspection operations to maintain quality standards and specifications Clean machines, tooling, and finished parts as required Stack and organize raw and finished materials properly within storage areas Perform first-piece quality inspections as verified by a supervisor or quality technician Monitor and record tooling, supplies, and raw material inventory usage Complete ongoing technical training requirements Maintain good housekeeping and a clean work environment Perform additional duties as assigned What We Expect from You High school diploma or general education degree (GED), or equivalent combination of education and experience One year of manufacturing experience preferred Technical certificate with related machining experience preferred Ability to set up and use measuring tools Ability to read and understand blueprints and technical drawings Familiarity with GD&T principles preferred Ability to read and understand g-code programming Strong attention to detail and commitment to quality Strong mechanical aptitude and troubleshooting skills Dependability and ability to work independently and in a team environment Commitment to safety and following established procedures Willingness to continue learning and developing technical skills Ability to align with company Leadership Principles and workplace competencies Excellent command of English, both written and spoken We Also Appreciate CNC programming experience Experience working in a precision manufacturing environment Familiarity with quality inspection processes and standards Strong organizational and time management skills A proactive approach to troubleshooting and process improvement Ability to adapt in a fast-paced production environment A collaborative, team-oriented mindset A positive attitude and strong alignment with company values, including safety, diversity, and organizational effectiveness Physical Demands While performing the duties of this job, the employee may be required to stand for extended periods, use hands and fingers for detailed machining tasks, and frequently lift or move materials and tooling. The role may involve bending, reaching, stooping, and handling finished parts and raw materials. Specific vision abilities required include close vision, depth perception, and the ability to adjust focus. Work Environment This role operates in a manufacturing environment and regularly works around moving mechanical parts and machining equipment. The employee may occasionally be exposed to noise, airborne particles, heat, vibration, and other manufacturing-related conditions. Required personal protective equipment (PPE) must be worn as applicable. Employees are expected to maintain a safe, clean, and organized workspace at all times. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job DescriptionRELOCATION PACKAGE OFFERED CNC Programmer Location:East Syracuse, NY Pay:$35–$40 per hour, based on experience (plus 10% shift premium) Shift:2nd shift, with training on 1st shift We’re seeking an experienced CNC Programmer to develop programs and manufacturing instructions for precision machined parts. This role works with horizontal and vertical machining centers in a prototype and low-volume production environment, primarily machining aluminum castings and some aluminum billet. What You’ll Do Create medium- to high-complexity CNC programs using 3-axis or higher CAM software. Simulate programs before posting code to prevent collisions and reduce machining time. Select tooling, gauges, speeds, feeds, and operation sequences from engineering drawings. Support initial setups, program prove-outs, and first-piece approval before turning production over to machinists. Troubleshoot and revise programs to improve quality, cycle time, and productivity. Develop setup instructions and tooling lists for the shop. Partner with Quality on CMM and manual inspection processes. Recommend changes to processes, equipment, or part designs when they can improve manufacturability. Maintain accurate records and follow ISO quality and shop safety procedures. What We’re Looking For Experience programming and machining complex geometries;approximately 4 years of CNC programming experience is preferred. Mastercam experience preferred. Ability to read blueprints and apply algebra, trigonometry, and machining calculations. Strong troubleshooting, organization, communication, and time-management skills. Associate degree in mechanical technology or equivalent hands-on experience. Ability to work independently and lift up to 35 pounds as needed. Benefits may include medical and dental insurance, paid time off, paid holidays, a 401(k), life insurance, and bonus programs. Apply todayif you enjoy bringing complex parts from drawing to proven CNC program. You should be proficient in: • GD&T, • Equipment Troubleshooting, • CNC Tooling, • Troubleshooting Skills, • CNC Programming, • G-Code, • M-Code, • CNC Machine Setup & Changeover, • Precision Measurement & Hand Metrology, • Advanced Inspection & Gauge Measurement, • Machine Geometry & Alignment, • Machine Setups for Production Runs, • Manual Machining Skills Machines & technologies you'll use: • CNC Mill (3-4 axis VMC), • CNC Lathe (2-4 axis)

Job DescriptionCNC Machinist – Direct Hire!Starting pay: $37,440/hour, depending on experience Days: Monday- Friday Hours: 2nd shift 3:30 p.m. - 12:00 a.m. p.m. Staffworks is seeking a reliable CNC Machinist for a direct placement for their award-winning client! What's in it for you? • Great starting rate, • Immediate hire on to the company, • Benefits! CNC Machinist Details: • Operates a CNC milling machines., • At specified frequencies, uses a variety of hand inspection tools such as but not limited to micrometers, calipers, indicators etc. to compare a part dimensions with the blueprint or process and records the data on the required paperwork., • Loads feed mechanism by lifting stock into position., • Verifies settings by measuring positions, first-run part, and sample work pieces; adhering to international standards., • Maintains specifications by observing milling operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes., • Proactively supports the ISO process approach to quality management and the Syteline MIS system. CNC Machinist Qualifications: • Technical, BOCES, or high school graduate with experience in blueprint reading, using measuring instruments, and manual or CNC machine center operation or equivalent and one (1) year of experience., • Ability to read prints, diagrams, and use micrometer, verniers, calipers, and gauges., • Strong attention to detail. We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization. How to Apply: www.staffworkscny.com (315) 455-9675 "INDITES"

Job Description We’re seeking a highly skilled, detail-oriented and technically driven CNC Programmer II to join our growing Machine Shop team. Do you have strong experience developing CNC programs and supporting complex machining operations? Are you comfortable working with engineering drawings, 3D models, G&M codes, CAD/CAM software and multi-axis CNC equipment? Do you enjoy troubleshooting, optimizing machine processes and providing technical guidance to others? If yes, keep reading! As a CNC Programmer II, you will plan CNC programs and support machining operations for precision metal parts on automatic machine tools while also assisting the Production Supervisor with day-to-day team direction. You will develop, prove out and optimize CNC programs for multi-axis machining centers and traditional manufacturing methods, ensuring parts meet established quality and performance specifications. This role combines hands-on CNC programming and machining expertise with opportunities to provide technical guidance, support employee development and contribute to continuous improvement initiatives. Your tasks will include analyzing engineering drawings, sketches and 3D models to determine machining requirements, developing and optimizing CNC programs, selecting appropriate tooling and setup requirements, and creating detailed process and setup documentation. You will conduct program prove-outs and trial runs, inspect finished parts, troubleshoot programming issues and optimize processes to improve efficiency and reduce cycle times. You will also maintain the master CNC program directory, assist with the development of jigs, fixtures and special equipment, and coordinate programming activities while providing technical guidance to CNC Programmers and Junior CNC Programmers. In addition, you will support CNC machine operations, training and cross-training, quality initiatives, equipment maintenance and long-range manufacturing projects. Main responsibilities would be Analyze engineering drawings, sketches and 3D models to determine machining dimensions, configurations, cutting tools, speeds, feeds and machining processes. Develop and optimize CNC programs for multi-axis machining centers ranging from 2–9 axes and traditional manufacturing methods using PartMaker software for Okuma OSP, Mazak VCN and Mitsubishi Wire EDM. Select and specify tooling, cutter assemblies, backup programs, tool lists and setup requirements for CNC operations. Develop detailed shop process and setup sheets, instruction sheets and cutter assembly drawings to support machine setup and operation. Conduct CNC program prove-outs and trial runs, verify finished parts against specifications and make necessary program corrections. Optimize CNC programs following initial production runs to improve machining efficiency, reduce cycle times and identify cost-saving opportunities. Maintain and manage the master CNC program directory, ensuring proper file management, program accuracy, validity and accessibility. Assist in the design and development of jigs, tools, fixtures and special equipment for CNC applications and manufacturing processes. Coordinate and assign programming activities to CNC Programmers and Junior CNC Programmers while providing technical guidance and debugging support. Plan and organize special projects and long-range manufacturing initiatives. Set up and operate various CNC machines while performing required inspection and gauging to ensure parts meet established quality standards and specifications. Identify and recommend improvements to production methods, equipment performance and product quality to support efficiency and continuous improvement. Provide training, promote cross-training, support employee development and reinforce strong performance to encourage engagement and teamwork. Clean machines, tooling and parts and perform machine maintenance as required. Qualify measuring tools on a daily basis. Maintain appropriate records and documentation. Adhere to Bluefors quality and safety standards for all equipment, supplies and products. Perform other duties as assigned. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, and Paid Time Off (PTO). Location: Syracuse, NY Pay Range: $24-26/hr. (DOE) What we expect from you High school diploma/GED and completion of an Apprenticeship Program; or an associate’s degree plus four or more years of related experience and/or training; or an equivalent combination of education and experience. Experience with PartMaker software and CNC programming for lathes and mills. Ability to read, interpret and apply engineering drawings, CNC program documentation, safety rules, operating and maintenance instructions, procedure manuals and training documents. Strong understanding of G&M codes, manually written coded programs, conversational programming and CAD/CAM software, including PartMaker. Ability to develop and troubleshoot CNC programs for multi-axis machining operations. Strong mathematical, analytical and critical-thinking skills with the ability to evaluate information, identify alternatives and implement effective solutions. Ability to monitor machine operation using gauges, dials and other indicators to ensure equipment is operating properly and parts meet established requirements. Strong written and verbal communication skills, with the ability to provide clear instructions, training and technical guidance to others. Sound judgment and decision-making skills, with the ability to prioritize and manage workload effectively. Strong attention to detail and commitment to quality and safety. We also appreciate Experience working with Okuma OSP, Mazak VCN and Mitsubishi Wire EDM equipment. Experience developing and optimizing programs for multi-axis CNC machining centers. Experience designing or developing jigs, fixtures, tooling and special equipment. Experience providing technical guidance, training or mentoring to CNC Programmers or other manufacturing employees. Experience supporting continuous improvement initiatives focused on machining efficiency, cycle time reduction, cost savings or product quality. Experience participating in special projects or long-range manufacturing initiatives. Physical Demands While performing the duties of this job, the employee is frequently required to stand, reach with arms and hands, and use hand and finger dexterity. The employee is occasionally required to walk, stoop, kneel, crouch or crawl, and talk and hear. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close, distance and peripheral vision, depth perception, and the ability to adjust focus. Work Environment This position operates in a manufacturing environment and interacts with internal customers in a professional, courteous and cooperative manner. Required PPE must be worn as applicable. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and may occasionally be exposed to humid conditions, fumes or airborne particles, heat, cold, risk of electrical shock and vibration. The noise level in the work environment is usually moderately loud. This role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job DescriptionDirect Hire Machine Shop ManagerPay: $70,000-$90,000 annually Hours: 6 a.m.- to be determined Staffworks is seeking a reliable Machine Shop Manager to join their award-winning team! What's in it for you? Direct Hire Opportunity Great Salary Machine Shop Manager Details: • Plans and directs production to obtain maximum utilization of assigned employees and materials and to ensure on time shipment of parts meeting customer’s specifications, • Coordinates supply of raw materials, and perishable tools, • Revising working practices and observes employees to ensure compliance with standards, • Inspects equipment to ensure specific operational performance, • Coordinates repairs and preventive maintenance with Maintenance personnel to ensure minimum downtime., • Informs General Manager of employee problems that require his/her attention and the disposition of resolved minor problems, • Provides hands on departmental instruction and training, • Follows company’s performance appraisal policy and recommends merit increases, promotions, transfers and other personnel actions for assigned personnel.Machine Shop Manager Requirements, • High school graduate or equivalent., • A.S. in Mechanical technology or B.S. degree in engineering with a focus on particular process, • Supervisory experience in a manufacturing company specializing in CNC machining, • Technical experience in CNC machining/programming preferred., • Strong oral and written communication skills, • Computer literacy including Word, Excel, email, and Outlook., • Familiarity with an ERP system such as Syteline or SAP etc., • Five (5) years of production management experience, • Ability to lift up to 35 pounds as neededWe are an Equal Opportunity Employer and celebrate diversity at all levels of our organization.How to Apply: www.staffworkscny.com (315)455-9675 "INDITES"

Job DescriptionDescription: Job Summary: The Production Engineer / Programmer is responsible for creating, maintaining, and troubleshooting manufacturing programs and production support processes for CNC, laser, plasma, robotic welding, and fabrication equipment. This role serves as a technical resource for production personnel by supporting machine programming, resolving tooling and process concerns, improving production workflows, and ensuring programs and documentation support safe, efficient, and high-quality fabrication operations. Requirements: Essential Duties and Responsibilities: • Develop and maintain CNC, laser, plasma, robotic welding, and fabrication programs as required., • Create machine programs using CAD/CAM software and manufacturing systems., • Review engineering drawings and specifications to ensure manufacturability and programming accuracy., • Provide technical support for production personnel regarding manufacturing processes and programming issues., • Troubleshoot programming, tooling, and machine performance concerns. Production Support & Continuous Improvement • Support day-to-day production needs related to programming, setup, workflow, and fabrication process issues., • Analyze production workflows and identify opportunities to improve efficiency, throughput, and repeatability., • Assist in reducing setup times, cycle times, scrap, and rework., • Support implementation of lean manufacturing and continuous improvement initiatives as they relate to production programming and equipment use. Engineering & Documentation Coordination • Collaborate with engineering and production teams to address manufacturability or programming concerns., • Review bills of material, routings, and manufacturing documentation for accuracy related to production programming., • Support engineering change implementation where changes impact machine programs, tooling, or production methods., • Maintain accurate documentation related to programming, setup, and production support activities. Quality, Data & ERP Support • Ensure programs and production support processes comply with company quality standards and customer requirements., • Support corrective actions, root cause analysis, and preventive actions related to programming or production process concerns., • Create and maintain production information, routings, labor standards, and related manufacturing data within ERP systems as required., • Analyze production metrics and recommend improvements based on data. Safety • Promote safe manufacturing practices and compliance with OSHA regulations., • Participate in safety audits, investigations, and improvement activities as needed., • Ensure programming, tooling, equipment, and process changes consider employee safety requirements. Physical Requirements • Ability to stand and/or walk for up to 8 hours per day., • Ability to work on a computer for up to 8 hours per day., • Must be mindful of safety and use proper PPE when required.

Eaton's ES GEIS CHD division is currently seeking a CNC Machinery Operator - 2nd shift. The core hours are 2:30 pm to 10:30 pm. The hourly rate for this position is $22.52 + $1.50 shift differential per hour.\n \n \nPlease note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. \n \n What you'll do:\n \n JOB DESCRIPTION:\n \n• Setup and operate conventional machines; and operate only NC and CNC and automatic chucking machines to perform a variety of turning, drilling, tapping, boring, reaming, threading, forming, facing, milling, slotting, grooving, chamfering, serrating and deburring operations to produce a variety of explosion proof parts of various materials.\n \n• Machines include, but are not limited to, single spindle and multi-spindle drill presses and tappers, nameplate machine; cover machine; horizontal and vertical milling machines; spot welder; annealing oven; parts washers; multi-axis, multi-turret automatic and hand turret lathes, deburring grinder; automatic bar machines; and CNC turning centers.\n \n• Position parts into chucks, fixtures or loading devices; move selection levers for prescribed speeds and feeds; initiate machining cycle and remove machined parts. \n \n• Operation sequence is prescribed. \n \n• Make adjustments, change, and reset tooling to maintain specified dimensions. Load castings and bar stock to insure continuous operation of equipment. \n \n• Major adjustments and setups done by others, but may assist as directed. \n \n• Operate weigh count scale, annealing oven, various hand and power tools; wash parts; assemble, pack and label various products as required. \n \n• Maintain a supply of materials to machines and remove finished work as necessary to establish a flow through the cells. \n \n• May instruct others in the performance of job duties.\n \n• Refer to assembly drawings, wiring diagrams and machining blueprints to maintain tolerances. \n \n• Check work periodically using fixed or adjustable gauges and visually inspect all parts for appearance and compliance to specifications; correct for any discrepancies. \n \n• Exercise care to observe operations; note and refer improvements. \n \n• Assist in isolating and correcting malfunctions in machining and control units. \n \n• Perform similar or associated duties as required or directed. \n \n• Assist in maintaining Material Replenishment System (MRS). \n \n• Maintain accurate records and perform clerical functions as required. \n \n• May produce move tickets, JAT's, etc. using the CRT. Record Standard Work, graph load charts and maintain visual controls. \n \n• Maintain work area, machines and control units in a clean, neat and orderly condition. \n \n• Perform Total Preventative Maintenance (TPM) activities as minor maintenance that includes cleaning, inspection, minor lubrication and tightening loose bolts. \n \n• Administer the 5-S's. Follow standard or prescribed safety regulations. \n \n• Refer all questionable cases to proper supervision. \n \n• Duties involve application of some specialized knowledge and experience and the use of some judgment to comply with instructions or prescribed routines and to make minor decisions.\n \n Qualifications:\n \n Required (Basic) Qualifications: \n \n• High School Diploma or General Education Development (GED) certificate.\n \n• Minimum one(1) years' previous work experience in CNC operation \n \n• Must be able to work in the United States without corporate sponsorship now and within the future. No relocation benefit is offered for this position. Only candidates residing within the immediate geographic area (50 miles) of Syracuse, NY will be considered for this position. \n \n• Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.\n \n \nWe are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.\n \n \nEaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number.\n \n \nWe know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's ES GEIS CHD division is currently seeking a NC/CNC Machine Set-Up & Operate - 1st Shift. The core hours are 6:30am-2:30pm.. The hourly rate for this position is $25.89 per hour.\n \n What you'll do:\n \n \n\n • Plan and perform a wide variety of setups and machining operations on all machine shop equipment, including engine lathe, vertical turret lathe, radial drill press, spindle drill press, shaper, surface grinder, horizontal and vertical milling machines.\n, • Use all necessary machine attachments, select tools, feeds and speeds according to material and finish requirements.\n, • Square up and layout production run or special castings for machining operations to fairly close and close tolerances.\n, • Work with a variety of metals such as steel, iron, brass, bronze and aluminum.\n, • Layout, machine, fit and assemble jigs and fixtures to facilitate own work.\n, • Determine operation sequences, make computations for use of dividing head, angles, tapers, fits and assembly.\n, • Check parts for adequate finish allowance, defective material or faulty operation.\n, • Maintain equipment, machines and work area in a clean, safe and orderly condition in compliance with 5s processes.\n\n \n Qualifications:\n \n Required (Basic) Qualifications: \n \n\n • High School Diploma or General Education Development (GED) certificate.\n, • Minimum two (2) years' previous work experience in NC/CNC setup and operation\n, • No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Syracuse, NY will be considered. Active-Duty Military Service member candidates are exempt from the geographical area limitation.\n\n\n, • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.\n\n \n#IND123\n \n \n#LI-JW1\n \n \nWe are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.\n \n \nEaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number.\n \n \nWe know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's ES GEIS CHD division is currently seeking a CNC Machinery Operator - 3rd shift. The core hours are 10:30 pm to 6:30 am. The hourly rate for this position is $22.52 + $1.50/hour shift premium per hour.\n \n What you'll do:\n \n \n\n • Perform a wide range of machining operations on two or more Numerically Controlled Lathes, Chuckers or Turning Centers, some of which may be equipped with automatic, robotic or manual load/unload systems and/or related secondary auto/manual equipment.\n, • Operate Six Spindle Automatic Bar Machines.\n, • Work with operation sheets, tapes and blueprints as required.\n, • Required to change tooling, load automatic tool changes and maintain quality standards by checking parts with adjustable or fixed gauges.\n, • Assist in isolating and correcting malfunctions in machining and control units.\n, • Perform various internal operations related to producing a finished product.\n, • Work from standard work and maintain visual controls and aids (charts, schedules, etc.) and accurate records as directed.\n, • Maintain work area, machines and control units in a clean, neat and orderly condition.\n, • Perform minor maintenance that includes cleaning, inspection, minor lubrication and tightening loose bolts.\n\n \n Qualifications:\n \n Basic (Required) Qualifications:\n \n\n • Minimum one (1) years' previous work experience in CNC operation, or graduate of a CNC certificate program\n, • High school diploma or GED\n, • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse, NY (50 miles) will be considered for this position.\n, • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.\n\n \n \nWe are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.\n \n \nEaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws.\n \n \nYou do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report.\n \n \nTo request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number.\n \n \nWe know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's ES GEIS CHD division is currently seeking a Maintenance Repair Technician (CNC)- 2nd shift. This position is based at our Syracuse, New York facility with core hours of 2:30pm to 11:00pm. The hourly rate for this position is $40.51/hour + $1.50/hour shift premium per hour. \n \n What you'll do:\n \n \n\n • Tear down, determine extent of troubles, repair damaged electrical or mechanical mechanism or replace worn or defective parts and reassemble following standard and prescribed safety regulations.\n, • Need a basic understanding of PLC logic and machine programming (Mcode/Gcode)\n, • Adjust equipment to required specification and check to assure effective operation.\n, • Check sequence of machine cycle, determine type of machine malfunction, make all necessary repairs applying machine repair theory along with electrical theory.\n, • Perform electrical test operations.\n, • Work from complex schematic diagrams, manuals and testing procedures.\n, • Troubleshoot all defective printed circuit assembly boards.\n, • Perform similar or associated electrical or mechanical duties as directed.\n, • Detect and report all unusual cases to proper supervision.\n, • Use of judgment to comply with instructions or prescribed routines and to make decisions.\n\n \n Qualifications:\n \n Required (Basic) Qualifications:\n \n\n • High School Diploma or General Education Development (GED) certificate.\n, • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.\n, • No relocation benefit is offered for this position. Only candidates residing within the immediate geographic area (50 miles) of Syracuse, NY will be considered for this position\n, • 2-year degree in electronics or electrical technology or experiential equivalent\n, • 5 years of experience in NC and CNC repair\n, • Industrial mechanical background\n\n Preferred Qualifications\n \n\n • 5 years of PLC experience in troubleshooting\n, • Journeyman certification or educational equivalent\n, • Additional educational or vocational training is a plus but not required\n\n Benefits: \n \n• 401K Contributions \n \n• Medical, Dental, Vision Insurance effective Day 1 \n \n• Paid Time Off - Vacation and Holiday's \n \n• Employee Assistance Program\n \n \n#IND123 #LI-JW2 \n \n \nWe are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.\n \n \nEaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number.\n \n \nWe know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Senior Industrial Maintenance Technician.CNK Machine Manufacturing, Inc.North Chesterfield (Richmond), Virginia.About CNK Machine Manufacturing.CNK Machine Manufacturing is an established precision manufacturing company specializing in CNC machining for the aerospace, defense, and industrial markets

Company Description WALDRICH COBURG is a global leader in designing and manufacturing large precision machine tools, headquartered in Coburg, Germany. WALDRICH COBURG NA, Inc. serves as the North American sales, service, and repair hub, ensuring top-notch support for clients in the region. The company takes pride in its state-of-the-art machinery and commitment to delivering excellence to customers worldwide. Their operations focus on providing efficient and reliable solutions that meet the highest industry standards. Role Description The Senior Field Service Technician is a full-time, remote position (~85%+ travel) responsible for installing, maintaining, servicing, and troubleshooting precision machine tools on customer sites across North America. This role involves diagnosing mechanical, electrical, and control system issues, training users on machine operations, and tuning equipment for optimal performance. Collaboration with internal teams and customers to address technical challenges effectively is a core aspect of the position. Qualifications • Proficient in troubleshooting and repair of mechanical, electrical, and control systems on precision equipment, • Experience with CNC operation, and maintenance, • Strong problem-solving and analytical skills to resolve technical issues efficiently, • Excellent communication skills for user training and teamwork with customers and internal teams, • Willingness to travel extensively to client sites across North America, • Prior experience in field service of large-scale CNC machine tools, • Ability to work independently and manage tasks in remote settings, • Knowledge of relevant safety protocols and adherence to industry standards, • Technical diploma or degree in Mechanical, Electrical, or Mechatronics or a related experience, • Familiarity with WALDRICH COBURG or other vertical milling machines or similar equipment is an advantage

CNC Maintenance Technician, CNC Service Technician, Field Service Technician/Engineer, CNC Machine Operator, or similar. Field Service Engineer – CNC / Industrial Machinery. Field Service Engineer to support customers throughout the Midwest.

Position Summary: We are seeking a highly skilled Manufacturing Engineer to support the design, build, and deployment of automated machinery systems. This role is responsible for developing and optimizing manufacturing processes, with a strong emphasis on CNC programming, mechanical design interpretation, and full turnkey project execution—from machine arrival through installation, commissioning, and final customer acceptance. The ideal candidate combines hands-on technical expertise with strong project ownership and cross-functional collaboration. Key Responsibilities: • Develop, write, and optimize CNC programs for multi-axis machining centers to support production of precision components and assemblies., • Interpret and work from mechanical designs using SolidWorks or AutoCAD, ensuring manufacturability and efficient production workflows., • Lead and execute turnkey manufacturing processes, including machine setup, validation, process qualification, and final handoff to customers., • Collaborate with design engineering to refine product designs for manufacturability (DFM) and cost efficiency., • Oversee machine installation and commissioning at customer sites, ensuring systems meet performance, safety, and quality standards., • Create and maintain detailed process documentation, work instructions, and standard operating procedures (SOPs)., • Troubleshoot machining, tooling, and automation issues, implementing corrective actions to minimize downtime and improve throughput., • Select and validate tooling, fixtures, and cutting strategies to optimize cycle times and product quality., • Support continuous improvement initiatives using lean manufacturing and root cause analysis methodologies., • Coordinate with cross-functional teams including design, assembly, quality, and field service to ensure seamless project execution., • Provide technical training and support to operators, technicians, and customers as needed. Required Qualifications: • Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, or related field (or equivalent experience)., • 1–6+ years of experience in a manufacturing or automation environment., • Strong CNC programming experience (e.g., G-code, CAM software) for complex machined components., • Proficiency in SolidWorks and/or AutoCAD for interpreting and supporting mechanical designs., • Demonstrated experience managing or contributing to turnkey manufacturing or automation projects., • Solid understanding of machining processes, tooling, fixturing, and materials., • Ability to troubleshoot mechanical and process-related issues in a fast-paced environment., • Willingness to travel for machine installation and customer support as required. Preferred Qualifications: • Experience with multi-axis machining (4-axis/5-axis)., • Familiarity with PLCs, automation systems, and robotics integration., • Knowledge of GD&T (Geometric Dimensioning & Tolerancing)., • Experience with ERP/MRP systems and manufacturing data tracking., • Lean manufacturing or Six Sigma certification. Key Competencies: • Strong problem-solving and analytical skills., • Excellent communication and customer-facing abilities., • High level of ownership and accountability for project outcomes., • Ability to manage multiple priorities and deadlines effectively., • Hands-on, detail-oriented approach with a focus on quality and efficiency. Work Environment: • Combination of office, shop floor, and customer site environments., • May involve standing for extended periods and working with machinery.

Perform preventive maintenance, machine inspections, alignments, and calibration procedures. Minimum 3 years of CNC machine tool maintenance or field service experience.

NC/CNC Machine Set-Up & Operator – 1st Shift.If the following job requirements and experience match your skills, please ensure you apply promptly.NC/CNC Machine Set-Up & Operator.Set up and operate engine lathes, vertical turret lathes, radial/spindle drill presses, shapers, surface grinde

NC/CNC Machine Set-Up & Operator – 1st Shift.If the following job requirements and experience match your skills, please ensure you apply promptly.NC/CNC Machine Set-Up & Operator.Set up and operate engine lathes, vertical turret lathes, radial/spindle drill presses, shapers, surface grinde

$70 million in new equipment, a team that trusts you, and problems worth solving: sound like your kind of shop? Job Summary: We are hiring a Senior Manufacturing Engineer to join a precision machining operation that builds some of the most technically demanding components in general aviation. This is a first-shift, fully onsite role based in Mobile, Alabama - and it is built for someone who is equally comfortable reviewing CMM data at a workstation and standing next to a 5-axis machining center making real-time program adjustments. You will own production processes, close the gap between engineering and the shop floor, and be a key player in continuous improvement and new product development efforts. This is a long-term seat at a well-capitalized, growing operation. Key Responsibilities: • Support daily production machining operations: troubleshoot issues, adjust CNC programs and toolpaths, and keep the floor running at spec., • Review CMM data and apply statistical methods to evaluate and improve processes, integrating findings into MES work instructions., • Participate in the qualification and training of production team members, including signing off on operator training charts., • Drive continuous improvement initiatives with a Lean Manufacturing focus, identifying opportunities across assigned cells and equipment., • Collaborate cross-functionally with engineering, planning, operations, and quality to solve problems and advance new product development projects., • Develop and modify CNC programs (G-code, macro variable logic) to support ongoing and new production activities. Qualifications: • A Bachelor's degree in Mechanical, Manufacturing, Industrial Engineering, or a closely related field., • 4-12 years of hands-on manufacturing engineering experience with a strong background in CNC machining, ideally on 5-axis equipment., • Proven ability to interpret CMM data and make program or toolpath adjustments directly at the machine control., • Familiarity with Siemens PLC or similar machine controls; Mazak experience is a plus but not required., • Working knowledge of GD&T, PPAP, SPC principles, and shop floor gaging methods.

Job Summary Amfas International is looking for a senior manufacturing engineer to serve as the technical authority behind the products we build. Amfas supplies Cast, CNC Machined, Forged, Welded, MIM, Stamped, Plastic injection, and Assembled industrial components through a global supply base. We own a North American assembly and third-party logistics facility, and work with partner factories around the world. This role reviews customer designs, determines how parts should be made, guides tooling and fixture design, selects and suggests materials and processes, and sets the technical standard our supply base is expected to meet. This is a senior individual contributor role with no direct reports. Engineering team coordination and program scheduling stay with engineering management. This position exists to provide technical depth: walking shop floors at our facility and at suppliers, evaluating process capability, and leading root cause on difficult quality and process failures. It is also a customer liaison role, joining customer engineering calls, presenting findings, and visiting customer sites to keep Amfas aligned with what the customer needs. The position is remote in the United States or northern Mexico and travels 25 percent or more. Position Scope • Owns technical decisions: process selection and routing, tooling and fixture direction, material selection, and design for manufacturability judgment., • Provides technical evaluation when new suppliers are being considered. Finding sources and selecting suppliers stays with the sourcing and commercial team., • Technical mentor to Amfas engineers globally, with no supervisory responsibility. Program timelines and engineering team management stay with engineering management. Essential Duties and Responsibilities • Serve as the senior technical authority on manufacturing processes across machining, casting, fabrication, and assembly., • Review customer drawings, models, and specifications, provide design for manufacturability guidance, and set the manufacturing approach and process routing for new parts, including material selection, secondary operations, and finishing., • Design or direct the design of tooling, dies, molds, gauges, and fixtures, review supplier tooling proposals, and approve design changes, drawing revisions, and deviation requests., • Provide technical review on new quotes, confirming parts can be produced as priced and identifying cost drivers, tolerance risk, and process alternatives., • Evaluate prospective and current suppliers on equipment, process capability, tooling practice, and engineering competence, and visit plants to verify parts are built to the agreed method., • Lead root cause analysis and corrective action on complex quality and process failures, and support APQP and PPAP activity including process flow, FMEA, control plans, and capability studies., • Act as the senior technical contact for customer engineering teams, and translate customer requirements into clear manufacturing requirements for the supply base., • Mentor Amfas engineering staff globally and maintain internal technical standards. Requirements · Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering, or equivalent, plus 15 or more years of manufacturing engineering experience with substantial production floor exposure · Deep process knowledge across CNC machining and turning, metal casting (die, investment, or sand), sheet metal and weld fabrication, and mechanical assembly · Tooling, die, and fixture design experience highly desirable · Strong materials knowledge across brass and copper alloys, steels, stainless, and aluminum, plus heat treatment, plating, and surface finishing · Fluent in engineering drawings, GD&T, and tolerance stack up, and proficient in 3D CAD · Working knowledge of APQP, PPAP, FMEA, control plans, and ISO 9001 · Excellent written and spoken English, with the presence to represent Amfas in front of customer engineering and executive teams · Based in the United States or northern Mexico, able to travel 25 percent or more including international travel Preferred Qualifications · Experience at a contract manufacturer, job shop, foundry, or die caster · Experience qualifying or developing suppliers in Asia, particularly China and India · Conversational Spanish, and familiarity with USMCA and IMMEX manufacturing in Mexico is a plus · CAM, CMM programming, or metrology experience · Experience serving security hardware, plumbing, appliance, automotive, or industrial equipment customers

About the Company Since 2009, Yibi Precision has been a leading OEM specialist in Metal Injection Molding (MIM), integrating innovation, precision, and reliability into every solution we deliver. With over 1000 employees and a 50,000 sqm facility, we are proud to serve global clients across industries such as medical, automotive, aerospace, and high-end consumer electronics. Expertise in MIM: High-performance parts (0.1g to 800g) with tolerances as tight as ±0.05mm. Full In-house Control: A 30-person mold workshop and end-to-end capabilities including CNC, stamping, laser engraving, and PVD plating. Global Standards: Certified with ISO 9001, IATF 16949, and Sedex 4P. About the Role We are seeking a results-driven International Business Manager (US Market) to lead business development, client partnership, and market expansion for Yibi Precision’s MIM precision components across the United States and North American markets. You will act as the commercial and technical bridge between Yibi’s world-class manufacturing capabilities and the high-standard demands of North American industrial clients, driving revenue growth and establishing Yibi as a trusted MIM partner for medical, automotive, aerospace, and high-end electronics. Responsibilities • Develop and execute market entry & growth strategies for the US market, achieving business targets for MIM precision components., • Identify, acquire, and develop long-term strategic clients across target industries (medical devices, automotive electronics, aerospace, consumer electronics)., • Provide professional technical & commercial support, including DfM (Design for Manufacturability) analysis, project evaluation, and solution consulting., • Manage the full sales cycle: lead generation, client communication, quotation, sample validation, mass production and account management., • Monitor market trends, competitor activities, and customer needs in the US precision manufacturing industry., • Represent Yibi Precision at industry tradeshows, online seminars, and technical events to enhance brand visibility in North America. Qualifications • 10+ years of business development, sales, or account management experience in precision manufacturing, metal components, MIM, CNC, die casting, or automotive/medical supply chains., • Proven track record of developing US or North American market clients and achieving sales growth., • Professional proficiency in English (written & spoken)., • Strong technical understanding of precision parts manufacturing, with ability to read drawings and communicate technical advantages., • Self-driven, results-oriented, with excellent client communication and project management skills. Required Skills • Business development & client acquisition, • Precision manufacturing knowledge (MIM/CNC preferred), • DfM (Design for Manufacturability) understanding, • US / North American market sales experience, • Technical sales & account management, • Market analysis & strategy execution Equal Opportunity Statement Yibi Precision is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. How to Apply If you are passionate about precision manufacturing and business growth in the US market, please submit your CV via LinkedIn. We look forward to connecting with you.

Diagnose, troubleshoot, and repair mechanical, electrical, hydraulic, pneumatic, and CNC control system issues on machine tools at customer sites. Perform routine cleaning, lubrication, adjustment, and preventive maintenance of machine components including bearings, gears, shafts, and other mechanic