Trabajos customer engineer en Holbrook, New YorkCrear alertas

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $90,000 - $120,000 annual based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 3- 7 minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team.

Job DescriptionMechanical Test Engineer - Level III US Citizenship is required for this role If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has a career opportunity available for a hands-on Mechanical Test Engineer-Level III to join our growing Engineering and Test Division. Our three divisions, Engineering and Test, Technical Services, and Mission Systems, make DTB a diverse and interesting place to work.Dayton T. Brown, Inc. is a premier leader as an independent testing laboratory providing testing and engineering services. We support customers across all platforms and services in the military, aerospace, shipboard, railway, weapons manufacturing, automotive, and consumer industries worldwide.The ideal candidate will be able to hit the ground running, must take a hands-on approach to their work, be flexible in their duties, and be a proven self-starter. Responsibilities include, but are not limited to:DTB is looking for a dedicated and detail-oriented Mechanical Test Engineer with over 5 years of experience in engineering, manufacturing, or construction projects. This candidate has proven expertise in mechanical or fluid systems, project management, and troubleshooting complex challenges. DTB is looking for a strong communicator with a track record of building lasting customer relationships and driving efficiency in fast-paced environments.Budget and Risk ManagementMechanical or Fluid systems ExpertiseMulti-task and manage numerous projects at the same timeStrong critical thinking skills to efficiently plan and direct large-scale projects, as well as mitigate risksTroubleshooting problems creatively and thinking outside the boxExcellent verbal communication skills required for customer correspondence and working with peersBuild and maintain long lasting relationships with customersPromote continuous improvement and be process driven The ideal candidate will need to be successful in this position:Required Qualifications:4 yr. bachelor's degree in either Mechanical, Fluids, Process, Manufacturing, or Systems Engineering REQUIRED5+ years- experience in an engineering position in a similar field REQUIREDAbility to obtain Secret clearanceUS Citizenship is required Preferred Qualifications:Project management experience on large-scale programs preferredExperience in Mechanical/Fluid/Systems testing a plusEngineering design (Inventor, AutoCAD, etc.) experience a plusMS Project experience a plusAbility to work overtime to meet deadlines, including nights and weekends, as necessaryMotivated to learn new challengesStrong attention to detailClear verbal and written communication skillsAs a Dayton T. Brown employee, you can expect a fun working environment that provides security and career advancement, and so much more such as:Tuition reimbursementA stable, successful organizationInnovative work environmentAdvancement potentialPrivate medical, vision, and dental insuranceProfit sharing, 401K with company match!Work/Life balance and family values. Dayton T. Brown, Inc. is an equal opportunity employer - Veterans and Disabled. Job Posted by ApplicantPro

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $120,000 - $160,000 annually based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities: • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements: • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 7+ minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description WHO WE ARE: Firematic is a family-owned business serving those who protect us all for over 50 years! We are currently looking for an enthusiastic mechanical engineer with strong attention to detail to work with the Engineering team to design and engineer custom fire apparatus and emergency vehicles. WHAT YOU'LL BE DOING: Responsibilities include but are not limited to: • Design emergency vehicle bodies and chassis cab accessories using SolidWorks software products, • Produce drawings that shop employees will utilize to fabricate and assemble new emergency vehicles, • Ensure CAD system configurations incorporate all large and small components to avoid conflicts when assemblies are erected, • Understand cable routing during the design of complex sheet metal assemblies, • Report to Director of Operations to synchronize design and production scheduling, • Follow all company safety procedures when observing or operating on the production floor, • Ensure products are consistent with those requested by the customer, • Generate and maintain parts lists to order necessary parts for each vehicle based on the given specification and design., • Keep an organized parts & design library accessible by all fellow engineers, • Present vehicle designs to customers during Pre-Construction meetings, take notes., • Communicate regularly with management & assigned sales-people with design updates., • Regularly check shop work for quality assurance, communicate regularly with shop staff, providing advise & feedback. WHAT YOU BRING TO THE TABLE: If you can check ALL of these boxes, please send us your resume, we would love to talk to you! • Bachelor's degree in Mechanical Engineering with a minimum of 5 years work experience, • Use SolidWorks to accurately and proficiently model complex structural sheet metal assemblies, • Use SolidWorks to create complex plumbing systems and electrical harnesses, • Experience with Solidwork's PDM & managing design libraries., • Read written specification documents and use original thought, creativity and engineering knowledge to design products that strictly meet those specifications, • Ability to accurately and completely indicate design problems and form solutions in a prompt, complete and clear manner, • Thorough understanding of automotive engineering principles, • Apply automotive engineering principles to adapt drivetrains to accommodate additional PTO components, • Understand mechanical and electrical requirements of purchased parts related to the automotive and fire industries, • Understand the abilities and inabilities of CNC waterjet machinery, CNC Press Brakes, GTAW & GMAW as well as all common machine shop and metal shop tooling, • Hands on automotive or aviation repair experience, • Create drawings for a manufacturing facility, • Create assembly and welding work instructions, • Use knowledge of fluid dynamics in conjunction with common fire industry plumbing products and procedures to design complex hydrodynamic systems, • Capacity to maintain extreme level of detail, • Work as part of a team to brainstorm, troubleshoot and produce designs, procedures and products, • Must be able to deal with customers, staff and vendors in an enthusiastic, cheerful and helpful manner, • Ability to learn and translate essential technical details regarding the fire apparatus utilizing CAD/CAM software. Preferred Experience: • General welding knowledge, • SolidWorks PDM, Inventor, Pro E, Creo, • Emergency Vehicle Technician, • Emergency vehicle sales or service, • Fire Suppression, • Automotive or high voltage electrical design or repair, • Commercial or residential construction, • NFPA 1901, 1906, 70

Job DescriptionDescription: We are seeking an experienced Engineering Lead to provide day-to-day leadership and development of our electrical and mechanical engineering team. This hands-on role combines people leadership with engineering expertise to ensure projects are appropriately staffed, priorities are aligned, and the team delivers innovative electrical and LED lighting products successfully. Working closely with the Sr. Project Engineer, this role will oversee team performance, resource allocation, workload planning, and engineering processes while supporting product development and project execution. Key Responsibilities • Manage day-to-day work assignments, priorities, team capacity, and resource allocation in partnership with the Sr. Project Engineer, • Lead, coach, and develop engineers and engineering technicians, including 1-on-1s, performance reviews, goal setting, and technical guidance, • Design, test, troubleshoot, and improve electrical products throughout the full product lifecycle, • Lead engineering projects and new product development initiatives with internal teams, OEM customers, manufacturing partners, and overseas suppliers, • Support project schedules, deliverables, technical risks, and resource needs to ensure successful and timely execution, • Drive product testing, troubleshooting, root-cause analysis, corrective actions, and continuous product improvement, • Coordinate hardware, firmware, and software integration and support technical problem-solving across engineering disciplines, • Ensure engineering specifications, technical documentation, engineering changes, and work instructions meet ISO-controlled documentation requirements, • Provide technical support to Customer Service, Quality, Operations, manufacturing partners, and other cross-functional teams, • Support recruiting, interviewing, onboarding, training, and workforce planning for the Engineering department, • Drive team accountability and identify opportunities to improve engineering processes, workflows, communication, and overall department effectiveness Requirements • Bachelor's degree in Electrical, Mechanical, or related engineering discipline, • 5-7 years of progressive engineering experience, preferably in product development or manufacturing, • Demonstrated experience leading, mentoring, or managing engineering professionals, • Experience with engineering project execution, resource planning, product development, testing, and troubleshooting, • Working knowledge of ISO quality systems and engineering documentation, • Experience working with manufacturing partners and overseas suppliers, • Strong leadership, communication, organizational, and problem-solving skills Preferred Qualifications • Experience with automotive, heavy-duty transportation, electrical, or residential lighting products, • Experience working with suppliers in China and Taiwan, • Familiarity with hardware, firmware, and software product development, • Experience with Altium, MPLAB, LabVIEW, FileMaker Pro, or similar engineering tools Why Join Us • 401(k) with company match, • Highly subsidized medical, dental, and vision coverage, • Paid time off plus paid volunteer day, • Company-paid life insurance, • Employee Assistance Program (EAP) and healthcare concierge services, • Employee discounts on Maxxima products, • Discounts on concerts, movies, and theater events, • Company-sponsored employee events Salary Range: $95,00 - $125,000 Maxxima is a leading manufacturer and supplier of LED lighting technologies with divisions focused on the home lighting and heavy-duty truck markets. For more than 40 years, we have continued to grow by delivering innovative, high-quality products to the residential and transportation industries. As our business grows, our team continues to grow with it. Apply to join our team. We appreciate your interest in building your career with Maxxima. Requirements:

Job Description Position Title: Quality Engineer Intern For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $20 - $25 hourly a is a 6 month temporary position. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: We are seeking a motivated and detail-oriented Quality Engineering Intern to join our Quality team. This internship provides hands-on experience supporting an AS9100-certified Quality Management System within a high-reliability manufacturing environment. The successful candidate will work alongside Quality Engineers, Process Engineers, and Operations personnel to improve product quality, investigate manufacturing issues, and support customer and regulatory requirements. This is an excellent opportunity for engineering or technical students interested in aerospace, manufacturing, quality systems, and continuous improvement. Key Position Accountabilities: • Support Quality Engineers with day-to-day quality assurance and manufacturing activities., • Assist in investigating product and process nonconformances using Root Cause and Corrective Action (RCCA) methodologies., • Participate in the preparation, tracking, and closure of Corrective Action Requests (CARs) and verify implementation of corrective actions., • Review manufacturing records, inspection results, and test data for completeness and compliance., • Prepare and organize End Item Data Packs for customer deliveries, ensuring all required quality documentation is complete and accurate., • Assist with calibration program activities, including reviewing calibration status, updating records, and helping maintain measurement equipment compliance., • Analyze manufacturing and inspection data to identify trends, recurring issues, and opportunities for process improvement., • Support First Article Inspection (FAI) activities in accordance with AS9102., • Assist with internal audits and verification of compliance to AS9100 procedures and work instructions., • Participate in Material Review Board (MRB) activities by collecting data and supporting disposition documentation., • Review supplier documentation including Certificates of Conformance, inspection reports, and quality records., • Help maintain quality metrics, dashboards, and reports for management review., • Collaborate with Engineering, Manufacturing, Supply Chain, and Inspection teams on quality improvement initiatives., • Perform additional quality engineering projects as assigned. Required Knowledge, Skills and Abilities: • Strong analytical and problem-solving abilities., • Excellent organizational skills and attention to detail., • Ability to interpret technical drawings and engineering documentation., • Proficiency with Microsoft Excel, Word, and PowerPoint., • Comfortable working with data and identifying trends., • Strong written and verbal communication skills., • Ability to work independently while collaborating effectively within a cross-functional team., • Eagerness to learn aerospace quality standards and manufacturing processes. Qualifications: • Currently pursuing a degree in:, • Mechanical Engineering, • Electrical Engineering, • Industrial Engineering, • Manufacturing Engineering, • Quality Engineering, • Engineering Technology, • or a related STEM discipline, • Rising junior, senior, or graduate student preferred. Why Join Us? This internship offers meaningful, real-world engineering experience where your work directly supports the manufacture of high-reliability aerospace products. You'll collaborate with experienced engineers and quality professionals, gain exposure to industry standards, and build skills that translate directly into careers in aerospace, defense, medical device, automotive, and advanced manufacturing. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job DescriptionDescription: We are seeking a motivated Project Engineer to support the design, development, testing, and production of innovative electrical and LED lighting products. This position works closely with engineering, manufacturing partners, quality, customer service, and overseas suppliers to bring products from concept through production while ensuring quality, regulatory compliance, and customer satisfaction. This is an excellent opportunity for an engineer with a sense of curiosity who enjoys solving technical problems, working hands on in a lab environment, and leading projects in a collaborative team. Key Responsibilities • Design, test, troubleshoot, and improve electrical products through full production lifecycle, • Lead engineering projects with internal teams, OEM customers, and overseas suppliers, • Drive new product development, manufacturing support, and continuous product improvement initiatives, • Create and maintain engineering documentation, specifications, product instruction sheets, and technical work instructions, • Coordinate engineering change documentation and ensure compliance with ISO-controlled documentation requirements, • Provide technical support to Customer Service and manufacturing partners, • Analyze returned products, identify root causes, and recommend corrective actions, • Identify project risks, develop mitigation plans, and manage project schedules, • Provide technical guidance and training to technicians and engineering personnel, • Coordinate hardware, firmware, and software integration efforts, • Execute additional engineering projects, initiatives, and responsibilities as assigned to meet company and department objectivesRequirements:, • Bachelor's degree in Electrical, Computer, Mechanical Engineering, or a related engineering discipline, • 3-5 years of engineering experience, • Experience with electrical product development, electrical systems, troubleshooting, analog and/or digital circuit design, product testing, and continuous improvement activities, • Knowledge of ISO quality systems and engineering documentation, • Experience communicating with overseas suppliers, preferably in China and Taiwan, • Strong analytical, critical thinking, and problem-solving skills, • Customer-focused with excellent written and verbal communication skills Preferred Qualifications • Experience in automotive or residential lighting products is preferred, • Working knowledge of programming languages such as C and/or Python, • Experience with Altium, MPLAB, LabVIEW, FileMaker Pro, or similar engineering tools is a plus Why Join Us • 401(k) with company match, • Highly subsidized medical, dental, and vision coverage, • Paid time off plus paid volunteer day, • Company-paid life insurance, • Employee Assistance Program (EAP) and healthcare concierge services, • Employee discounts on Maxxima products, • Discounts on concerts, movies, and theater events, • Company-sponsored employee events Salary Range: $85,000 - $95,000 Maxxima is a leading manufacturer and supplier of LED lighting technologies with divisions focused in the home lighting and heavy-duty truck markets. We have been in business for over 40 years and we are consistently growing as both the residential and transportation industries continue to depend on us for our innovative, high-quality products. As our company grows, our team is growing right along with it. Apply to join our team. Thank you for your interest in wanting to work with us! Maxxima is a division of Panor Corp. We are an equal opportunity employer. Panor Corp. provides equal employment opportunity to all employees and applicants without regard to actual or perceived race, creed, color, citizenship, sex, pregnancy, religion, national origin, military status, marital status, sexual orientation, gender expression or identity, genetic information (including genetic predisposition), age, disability, status as a victim of domestic violence, or any other group protected by applicable federal, state and local laws. This policy applies to all terms and conditions of employment including, but not limited to, recruitment, hiring, assignment of duties, benefits, promotion, discipline, harassment, training, compensation, leave of absence, layoff and termination.

Sales Engineer — Capital Equipment / Machine Tool Sales\n Allendale Machinery Systems | Long Island, NY Territory About Allendale Machinery Systems\n Founded in 1981, Allendale Machinery Systems has grown into one of the Northeast's most respected machine tool distributors, built on a straightforward principle: deliver fair, value-driven solutions backed by genuine service. Our portfolio includes industry-leading brands such as Haas Automation, Kitamura Machinery, Citizen, and Miyano, complemented by a full range of tooling, automation, applications engineering, and 3D printing/additive manufacturing solutions. \n \n Allendale remains family-owned and is now in its third generation of leadership. That continuity shapes how we operate: we prioritize long-term relationships over transactional selling and invest genuinely in our people. It's also reflected in our manufacturer partnerships — we have represented most of our key product lines for more than 30 years, a level of continuity our customers recognize and trust. At the same time, Allendale continues to grow, building a deeper and more capable team while operating with the structure, discipline, and professionalism of a well-run organization. \n \n With 55 employees, more than 2,000 active customers, and a sales organization focused on the NY/NJ territory, Allendale has earned a reputation as the partner manufacturers turn to first — not simply to purchase a machine, but to solve a problem. We are looking for a professional who is ready to build that same reputation within their own territory. The Opportunity\n As a Sales Engineer covering Long Island, you will serve as Allendale's primary representative within your territory — the professional manufacturers rely on for solutions, not just sales pitches. This is a capital equipment role characterized by longer sales cycles, higher-dollar transactions, and relationships built over years rather than days. You will own your territory, develop new accounts, grow existing relationships, and establish yourself as the trusted technical resource your customers turn to first. What You'll Do\n\n • Serve as the primary point of contact for customers in your territory, building trust-based relationships across their organizations\n, • Prospect and develop new accounts through proactive outreach, cold calling, and regular in-person facility visits\n, • Manage the full sales cycle — qualification, presentations, proposals, demonstrations, and close\n, • Develop technical fluency in our product lines so you can assess customer applications and recommend the right solution\n, • Maintain accurate CRM documentation and pipeline visibility\n, • Partner closely with our Sales Manager, Technical Support, Operations, and Marketing teams to deliver a seamless customer experience\n, • Represent Allendale professionally at customer sites, industry events, and trade shows\nWhat We're Looking For\n We welcome candidates from two distinct backgrounds: \n \n Path 1 — Established B2B sales professionals. Candidates with a proven ability to cold call, engage decision-makers, and close longer, higher-dollar transactions. Comfort with frequent travel and in-person facility visits is essential. Experience selling capital equipment, industrial products, or other technical/consultative solutions is a strong advantage. \n \n Path 2 — Manufacturing or CNC machining professionals transitioning into sales. Candidates with deep shop-floor experience and a genuine understanding of manufacturers' needs, ready to build a sales career on that technical foundation. Allendale will invest in developing the sales skills required for success. \n \n Also valued: \n\n • Bachelor's degree in engineering or business\n, • Background in manufacturing, engineering, or a related technical field\n, • Strong collaborative instincts and experience working effectively as part of a team toward shared goals\n, • Valid driver's license and willingness to travel within the assigned territory\n, • High level of organization, follow-through, and CRM discipline\nWhy Allendale\n\n, • Join a company with over 40 years of stability and a well-established reputation as an industry leader\n, • A defined growth path: this role can progress into Product Specialist, Sales Manager, or other commercial leadership positions\n, • Represent best-in-class product lines — Haas Automation, Kitamura Machinery, Citizen, and Miyano — that customers already trust\n, • A family-owned culture that's expanding and building a stronger team, without losing its personal, relationship-driven approach\n, • The opportunity to contribute meaningfully to the future of manufacturing in the region\nApply Today\n If you are an accomplished sales professional who excels at building long-term relationships, or a manufacturing professional ready to bring your technical credibility to a sales career, we encourage you to apply. \n Join Allendale Machinery Systems and help us remain the partner manufacturers rely on to succeed.

Fully remote in AI Security!!! This Jobot Job is hosted by: Garrett Mathison Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $175,000 - $200,000 per year A bit about us: We are a rapid growth start-up helping enterprise clients ensure the security of their AI Agents. Why join us? We offer the opportunity to work on cutting-edge technology with full benefits, a remote work environment and a team of highly skilled engineers. Job Details We are seeking a highly skilled and motivated Rust Backend Engineer to join our dynamic team. This is a full-time permanent position in the AI Security space that offers an exciting opportunity to work on cutting-edge technologies. The successful candidate will be responsible for developing and maintaining robust, scalable software solutions using Rust programming language. You will work closely with our team of talented engineers to design and implement high-quality software solutions, ensuring system consistency and improving customer satisfaction. Responsibilities: 1. Design, develop, and maintain efficient, reusable, and reliable Rust code., 2. Integration of user-facing elements developed by front-end developers with server-side logic., 3. Identify bottlenecks and bugs, and devise solutions to these problems., 4. Work collaboratively with cross-functional teams to understand end-user requirements, formulate use cases, and translate them into pragmatic and effective technical solutions., 5. Deploy applications on GCP using technologies such as Compute Engine and Cloud Functions., 6. Use Terraform for infrastructure as code to automate and manage infrastructure., 7. Design and implement RESTful APIs., 8. Implement and manage Kubernetes clusters for container orchestration., 9. Maintain code integrity and organization, ensuring the best possible performance, quality, and responsiveness of the applications. Qualifications: 1. Bachelor's degree in Computer Science, Engineering, or a related field., 2. 5+ years of experience as a Rust Backend Engineer or similar role., 3. Proficiency in Rust programming language., 4. Strong experience with Google Cloud Platform (GCP), Compute Engine, and Cloud Functions., 5. Solid experience with Terraform and infrastructure as code., 6. Proficiency in designing and implementing RESTful APIs., 7. Experience with Kubernetes and container orchestration., 8. Strong understanding of data structures, system design, and algorithms., 9. Excellent problem-solving skills and attention to detail., 10. Ability to work independently and as part of a team., 11. Excellent communication and interpersonal skills. If you are passionate about technology and enjoy solving complex problems, this is the perfect opportunity for you. We offer a competitive salary and benefits package, along with the chance to work in a dynamic and innovative environment. Join us and contribute to shaping the future of the Tech Services industry. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Firmware Engineer Key Responsibilities: • Firmware Development: Design, develop, and maintain embedded firmware for power supply products, including microcontroller programming, device drivers, and communication protocols. Familiarity with Microchip, TI and Freescale uP’s and their coding., • Algorithm Development: Collaborate with hardware engineers to develop and optimize control algorithms for power conversion, voltage regulation, and protection mechanisms., • Integration and Testing: Integrate firmware with hardware platforms and conduct thorough testing to ensure functionality, reliability, and compliance with specifications and standards., • Documentation: Prepare clear and comprehensive documentation including design specifications, test plans, and user manuals to support product development and customer support activities., • Troubleshooting and Debugging: Identify and resolve firmware-related issues through systematic debugging, testing, and analysis of system behavior., • Continuous Improvement: Stay abreast of emerging technologies, industry trends, and best practices in firmware development to propose and implement continuous improvements in our products and processes., • Collaboration: Work collaboratively with cross-functional teams to ensure alignment of firmware development efforts with overall project goals and timelines. Qualifications: • BS in EE or Computer Science or related fields, • Prefer 3-5 years experience but entry level / new graduate will be considered based on experience., • Domestic and international travel may be required., • Bilingual Mandarin a plus., • Assembly language knowledge a plus., • Sponsorship for H1B is available., • Onsite position in NY(Long Island) office, no hybrid or remote option Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance, • Life Insurance, • Paid time off Location – New York (Long Island)

Meet - established customer service satisfaction levels and other operational/customer service metrics as outlined in established guidelines.

Respond to customer calls in a timely and professional manner. Join OBE As a Customer Service Representative. We're looking for Customer Service Representatives who thrive on solving problems, value precision, and bring a strong sense of reliability to the team.

As a Dollar Express Customer Service Representative you will be responsible for providing exceptional service to our customers. Accurately handles customer funds and processes transactions using the POS system. Remains constantly aware of customer activity to ensure a safe and secure shopping enviro

Objective: To develop customer relationships to increase customer loyalty; interact with customers in an efficient and professional manner; ensure legendary customer experience with every contact. Customer Service Representative. Notify customer of ship dates, production delays, art work and spec st

Establish customer relationships and follow up with customers, as needed. Use a customer-focused, needs-based review process to educate customers about insurance options. We help customers with their insurance and financial services needs, including Auto Insurance, Home Insurance, Life Insurance, an

We are seeking a friendly, reliable, and detail-oriented Customer Service Representative to handle incoming calls and provide professional assistance to customers. The Customer Service Representative plays an important role in ensuring that customers receive prompt, accurate, and professional assist

As a Customer Service Representative, you will work as part of a supportive team to be the face of U-Haul company's exceptional service and ensuring that customers get all the help they need on their journeys by inspecting and maintaining equipment. Customer Service Representative Responsibilities:.

Respond to customer requests for information concerning order tracking, order expediting and product availability. Notify customers of potential backorders, credit issues, order availability and any other information regarding orders. Assist in unloading and loading vendor and customer vehicles.

Enters sales orders into the system, contacts customers to ascertain data omitted on orders, resolves customer questions related to orders, provides price quotations, traces status of orders through traffic and production departments at plant locations. Be accountable and take ownership of the custo

We help customers with their insurance and financial services needs, including Auto Insurance, Home Insurance, Life Insurance, Business Insurance, Health Insurance, and Renters Insurance.

Enters sales orders into the system, contacts customers to ascertain data omitted on orders, resolves customer questions related to orders, provides price quotations, traces status of orders through traffic and production departments at plant locations. Receives customers' requests by telephone or e

As a Customer Service Representative - State Farm Agent Team Member with Patty Herbstman - State Farm Agent, you will generate the kind of exceptional customer experiences that reinforce the growth of a successful insurance agency. Answer customer inquiries and provide policy information. Process in

Establish customer relationships and follow up with customers, as needed. Use a customer-focused, needs-based review process to educate customers about insurance options. Develop leads, schedule appointments, identify customer needs, and market appropriate products and services.

Who we are looking for: Customer service representatives will ensure the delivery of excellent customer service while building solid customer relationships. We Are Hiring Asap! Local Customer Service Applicants Needed. We are looking for someone with excellent communication skills to fill our newly

As a Customer Service Representative - State Farm Agent Team Member with Lynne Barnhardt - State Farm Agent, you will generate the kind of exceptional customer experiences that reinforce the growth of a successful insurance agency. Answer customer inquiries and provide policy information. Assist cus

Customer Service Representative. Respond to customer inquiries (phone, email, chat, etc. Process requests and maintain customer records.

The Home Depot Pro Customer Service/Sales Team is dedicated to delivering an exceptional experience for professional customers, including contractors, property owners, and commercial clients. Pro Customer Service/Sales Team members build and maintain professional relationships with Pro customers, pr

Remote Work From Home Customer Service Representative Agent - Part Time Market Research Panelists Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Market Research assignments. Customer service representative agent experience is not necessa

We help customers with their insurance and financial services needs, including Auto Insurance, Home Insurance, Life Insurance, Retirement Planning, Business Insurance, College Planning, and Renters Insurance.

If you are a customer service representative agent or someone just looking for a flexible part time remote work from home job, this is a great way to supplement your income. Customer service representative agent experience not required. Remote Work From Home Customer Service Representative Agent - P

Customer service representative agent experience not required. Remote Work From Home Customer Service Representative Agent - Part Time Market Research Panelists Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Market Research assignments.

The Customer Service/Sales position types may include Department Sales, Lead Generator, Pro Account Sales, Sales Specialist, Special Services, and Customer Order Specialist. Position Purpose: Customer Service/Sales associates provide fast, friendly service by actively seeking out customers to assess

Customer service representative agent experience not required. Remote Work From Home Customer Service Representative Agent - Part Time Market Research Panelists Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Market Research assignments.

Remote Work From Home Customer Service Representative Agent - Part Time Market Research Panelists Our company is seeking individuals to participate in National & Local Paid Focus Groups, Clinical Trials, and Market Research assignments. Customer service representative agent experience is not necessa

You'll ensure a quick and easy customer experience and keep the store clean and clutter free. Assist customers when cashiering with a variety of transactions across different platforms (in-store, online and mobile), which includes operating a point-of-sale system, bagging items of all size, handling