Offres data cleaning à Phoenix, ArizonaCréer des alertes d'emploi

Position Summary Up to $10,000 Sign On Bonus This position performs diagnostic cardiac sonography examinations with a sub-specialty in fetal cardiac sonography examinations, as well as cardiology procedures to provide data for diagnosis of disease and injuries in accordance with all applicable standards, regulation and licensing requirements. Maintains a close working relationship with fetal cardiologists and nurse coordinators. Position Duties • Basic and Advanced Diagnostic Cardiac Sonography including Fetal SonographyPerforms high quality fetal exams for interpretation by fetal cardiologist. Performs diagnostic cardiac sonography examinations on patients across the spectrum of congenital and acquired heart disease for interpretation by a cardiologist. Determines proper technique and positioning to ensure optimal results in accordance with all applicable standards, protocols and procedures. Performs or assists with transesophageal, transthoracic and advanced techniques including stress echo cardiac sonography and/or 3D imaging as required and per training and expertise. Must regularly demonstrate mastery of fetal echocardiography. Maintains a safe environment for patients, families, and coworkers while performing all activities of the job. • Documents preliminary reportThe fetal sonographer works closely with the fetal cardiologist for all fetal exams to arrive at diagnostic conclusions. The fetal cardiologist will write the report. For all other pediatric or congenital exams, the sonographer creates a detailed report of sonographer` impressions to include pertinent medical history, anatomic findings and measurements for presentation to interpreting physician. It may include exam aspects outside sonogram results that may relate to diagnosis or treatment, including, but not limited to, patient reaction to temperature, pressure or movement of transducer, ability to respond to instructions, and movement limitations. Report is clear, concise, and grammatically correct and utilizes appropriate spelling and punctuation. Performs finalizing functions using Syngo and/or Electronic Health Record to facilitate timely and accurate results, charge capture and archival of studies. Takes steps to quickly remedy identified errors and omissions utilizing the chain of command as necessary. • Participates in the Annual Phoenix Fetal Cardiology SymposiumWillingness to assist with preparing images and/or presentations for the annual Fetal Cardiology Symposium. Able to participate as a Fetal Sonographer Faculty member and perform the duties assigned for a successful symposium. The duties may include teaching others in the hands-on session., • Maintains professional and technical competencyAttends the monthly fetal conference meetings, Contributes and participates in other fetal education opportunities to develop and build the program, (ie: fetal conference, research, symposium, etc.) Continues to pursue knowledge and self-improvement by remaining apprised of current literature, practices, and new developments in the field. Attends staff meetings as required to stay up to date on departmental policies and procedures. Participates in and contributes to Phoenix Children`s educational offerings and offsite conferences/seminars; completes self-directed learning via professional journals, texts and appropriate online resources to maintain continuing education credits as required for institutional and personal credentialing. Participates in career development and leadership activities to support the function of the lab. Proactively evaluates practices and assists to create and implement changes to increase and enhance the effectiveness of workflow practices. Serves as a preceptor to students, fellows and orientees in our program. Quality Improvement: Participates in quality improvement initiatives and integrates feedback into daily practice. • Care of Professional Environment and Equipment MaintenanceParticipates in cleaning, re-stocking, re-supplying, and turnover of cardio diagnostic exam rooms and equipment to provide for efficient, effective and safe department operations. Identifies and troubleshoots malfunctions to ensure continuous proper and safe operations. reports service needs and preventative maintenance issues as appropriate. Enters information into the departmental logs as required for accreditation purposes. Mission To advance hope, healing and the best healthcare for children and their families Vision Phoenix Children’s will be the leading pediatric health system in the Southwest, nationally recognized for exceptional care, innovative research and advanced medical education. We realize this vision by: • Offering the most comprehensive care across ages, communities and specialties, • Investing in innovative research, including emerging treatments, tools and technologies, • Advancing education and training to shape the next generation of clinical leaders, • Advocating for the health and well-being of children and families Values • We place children and families at the center of all we do, • We deliver exceptional care, every day and in every way, • We collaborate with colleagues, partners and communities to amplify our impact, • We set the standards of pediatric healthcare today, and innovate for the future, • We are accountable for making the highest quality care accessible and affordable

Position Summary Up to $10,000 Sign On Bonus This position performs diagnostic cardiac sonography examinations and cardiology procedures to provide data for diagnosis of disease and injuries in accordance with all applicable standards, regulations, and licensing requirements. This role demonstrates an expanding knowledge base of complex congenital heart disease for specific types of patient populations. The position applies more in-depth clinical reasoning and critical thinking skills and demonstrate an increased capacity to problem solve. Position Duties Identifies and troubleshoots malfunctions to ensure continuous proper and safe operations. Reports service needs and preventive maintenance issues as appropriate by utilizing the help desk and biomed service tickets as appropriate. Enters data in departmental logs as required. We realize this vision by: • Offering the most comprehensive care across ages, communities and specialties, • Investing in innovative research, including emerging treatments, tools and technologies, • Advancing education and training to shape the next generation of clinical leaders, • We place children and families at the center of all we do, • We deliver exceptional care, every day and in every way, • We collaborate with colleagues, partners and communities to amplify our impact, • We set the standards of pediatric healthcare today, and innovate for the future, • We are accountable for making the highest quality care accessible and affordable

WHAT WE DO As a premier provider of environmental services in the Western United States, Patriot Environmental Services provides a wide range of industrial, emergency response and remediation services. We are committed to the principles of safety, superior customer service and experience, and unyielding quality and dedication. We provide a broad array of environmental services to meet any need that our clients may have. From emergency spill response to hazardous waste transportation to wastewater treatment, or from industrial cleaning to full facility closure and remediation, Patriot can do it all with our own internal resources and do so while accomplishing every metric of success. Our mission is to always be Prepared and Professional. Join the team that makes a difference! DUTIES AND RESPONSIBILITIES • Ensure that Health and Safety is the number one priority by complying with all safe work practices, policies, processes, and acting in a safe manner., • Drive and operate a minimum of two types of heavy equipment including but not limited to 50/70 Barrel Vacuum and Single Roll-Off Trucks., • Make deliveries in a safe and timely manner., • Prepare Haz-Mat & Non-Haz manifests., • Maintain full compliance with DOT, FMCSA, daily ELD logs, timesheets and vehicle inspection reports., • Perform simple maintenance and cleaning of response vehicle and assigned truck., • Perform various housekeeping and custodial duties as required., • Answer 24/7 Emergency Response calls when on uncontrolled stand-by., • Work long hours and overtime, including days, nights or weekend shifts., • Other reasonable directives, responsibilities and activities may change or be assigned at any time with or without notice., • Comply with the Random Drug Testing Program. EXPERIENCE, EDUCATION AND REQUIREMENTS • High school diploma or equivalent highly preferred., • Current Commercial Driver License, required. Class A preferred., • Driving record that meets company standards and current DMV printout, required., • Hazmat and Tanker endorsement, required., • 40-hour HAZWOPER required., • 2 – 5 years of experience in heavy equipment driving and operation required., • 1 – 5 years of hazardous waste control and environmental services industry experience preferred., • All applicants must pass the following pre-employment requirements:, • Physical including drug and alcohol screening, • Background check in accordance with local laws and regulations CORE COMPETENCIES AND SPECIFIC SKILLS • Strong attention to detail with a distraction-free driving style., • Comprehensive understanding of logistics systems., • Safety conscious. PHYSICAL DEMANDS AND ENVIRONMENTAL CONDITIONS • Pull/push 50 lbs. unassisted on a frequent daily basis., • Twist and turn in full range of motion in arms, hands, torso, neck, back, and legs on a frequent daily basis., • Lift/carry 50 lbs. unassisted on a frequent daily basis., • Typing/data entry on a frequent daily basis, • Equipment used: industrial cleaning and heavy equipment, • Exposed to all environmental temperatures and weather conditions. BENEFITS • PTO, paid holidays, sick time, • Medical, dental, vision, life insurances, • 401(k) with company matching Salary Range : $26 - $35 per hour The compensation for the role will depend on several factors, including the candidate's qualifications, work experience, competencies, and skills, and may fall outside of the range shown.

Job Description JOB SUMMARY The Steward/Potwasher/Warewasher is responsible for maintaining cleanliness and proper storage of all china, glass, and silver, and ensuring the highest standards of sanitation. He/she is also responsible for assisting the kitchen staff in maintaining the cleanliness of the kitchen and all storage areas; specifically for cleaning all equipment, utensils, and the physical work area. He/she is also responsible for assisting with proper food storage and rotation. QUALIFICATION STANDARDS Education & Experience: · High School diploma or equivalent and/or experience in a hotel or a related field preferred. Physical requirements: · Flexible and long hours sometimes required. · Heavy work - Exerting up to 100 pounds of force occasionally, and/or 50 pounds of force frequently and/or up to 20 pounds of force constantly to lift, carry, push, pull or otherwise move objects. · Ability to stand during entire shift. · Ability to withstand temperature variations, both hot and cold. General Requirements · Maintain a warm and friendly demeanor at all times. · Must be able to effectively communicate both verbally and written, with all level of employees and guests in an attentive, friendly, courteous and service oriented manner. · Must be effective at listening to, understanding, and clarifying concerns raised by employees and guests. · Must be able to multitask and prioritize departmental functions to meet deadlines. · Approach all encounters with guests and employees in an attentive, friendly, courteous and service-oriented manner. · Attend all hotel required meetings and trainings. · Maintain regular attendance in compliance with Highgate Hotel Standards, as required by scheduling, which will vary according to the needs of the hotel. · Maintain high standards of personal appearance and grooming, which includes wearing the proper uniform and nametag. · Comply with Highgate Hotel Standards and regulations to encourage safe and efficient hotel operations. · Maximize efforts towards productivity, identify problem areas and assist in implementing solutions. · Must be effective in handling problems, including anticipating, preventing, identifying and solving problems as necessary. · Must be able to understand and apply complex information, data, etc. from various sources to meet appropriate objectives. · Must be able to cross-train in other hotel related areas. · Must be able to maintain confidentiality of information. · Must be able to show initiative, including anticipating guest or operational needs. · Perform other duties as requested by management. DUTIES & FUNCTIONS Fundamental Requirements · Maintain a high standard of cleanliness and orderliness in all kitchens, back dock, dumpster and utility work areas. · Heavy duty cleaning of ovens, grills, sinks, walls, floors, walk-in refrigerators and freezers and other heavy kitchen equipment. · Wash pots, pans, and kitchen utensils following proper procedure for their cleanliness and sanitation, and Vacuum carpeted areas through the food and beverage outlets. · Sweep, mop and wash floors in all food and beverage areas, kitchen, and restaurant and dock area. · Keep management informed of shortage of equipment and supplies. · Operate the dishwashing equipment to ensure that all china, glass, and silver are cleaned thoroughly and sanitation of such is maintained. · Return all clean china, glass, and silver to its proper storage location using care to minimize breakage. · Knowledge of proper safe handling techniques for all chemicals used. · Report any faulty equipment to management immediately. · Empty garbage from the Food and Beverage areas into the hotel dumpster. · Know the location and operation of all fire extinguishing equipment. · Practice safe work habits at all times to avoid possible injury to self or other employees. · Follow the proper procedures in the breakdown, cleaning and reassembling of all kitchen equipment, as needed. · Follow all sanitation standards. · Assist in the set up and breakdown of the restaurant buffet as required. · Assist Banquets by supplying china, glass, and silver as required by business demand.

Job DescriptionDescription: SUPER HEROES NEEDED!!!!!! -Must be 21 years of age or older -Must have 3 years legal driving experience -Must be able to obtain Level 1 Fingerprint Clearance Card -Must be able to drive a large capacity van BENEFITS INCLUDE: Merit Increases, Medical, Dental, Vision, PTO, Sick time, and Holidays!! JOB SUMMARY: The Direct Support Professional (DSP) will provide specialized sensory-motor, cognitive, communicative, social interaction, and behavioral training to promote skill development in individuals who have developmental disabilities. The DSP will deliver services with compassion and respect. ESSENTIAL FUNCTIONS: 1. Provide training and supervision for individuals to increase or maintain their socialization and adaptive skills., 2. Develop positive relationships and support for individuals and their caregivers., 3. Assist the individual in developing skills to achieve and maintain a quality of life that promotes their vision of the future., 4. Assist individuals in participating in meaningful age-appropriate activities and experience new activities., 5. Meet the physical needs of the individuals receiving services including attention to hygiene, health, and safety., 6. Implement habilitation goals as identified in the Individual Support Plan (ISP), 7. Provide opportunities for training and/or practice in basic consumer skills such as shopping, banking, money management, access and use of community resources, and community safety skills., 8. Develop, maintain, or enhance independent functioning skills in sensory-motor areas, cognition, and personal hygiene., 9. Assist the individuals in developing and maintaining friendships of their choice and provide training and support with social skills and problem solving., 10. Implement the daily curriculum and schedule for the day., 11. Maintain compliance with Division of Developmental Disabilities policies and procedures., 12. Perform special projects as directed by the Adult Day Services Manager and/or Lead Staff personnel., 13. Maintain accurate and timely data collection sheets and progress reports. Complete Incident Reports, as needed., 14. Provide safe transportation in a large-capacity vehicle either mornings or afternoons and for day-time outings – (must be 21 years or older for transportation duties.) PHYSICAL / MENTAL DEMANDS, ENVIRONMENT: 1. Maintain professionalism at all times while representing Family Partners, LLC, 2. Maintain and work within the program’s budget., 3. Provide safe transportation to and from the program and community activities, 4. Possess organizational skills and the ability to multi-task., 5. Must have outstanding communication and social skills., 6. The ability to initiate tasks necessary for the program to run efficiently., 7. Daily cleaning and setting up equipment utilized for the program. Requirements: MINIMUM QUALIFICATIONS: To function effectively in this position, the incumbent must possess or obtain: • High School Diploma or G.E.D., • Valid Arizona Driver’s License, • Reliable means of transportation with current insurance and registration, • Ability to obtain an Arizona Fingerprint Clearance Card, • Ability to pass criminal, background and reference checks To function effectively in this position, the incumbent must also pass the following trainings provided by Family Partners: • Article Nine Training, • Certification in Adult/Child/Infant CPR, and First Aid The DSP must have the ability to address more than one project at a time while prioritizing the demands and issues in a busy operating environment. In order to fulfill the transportation duties, a DSP must be at least 21 years of age.

Job Description * Location: Midwestern University • We are hiring immediately for full time COOK positions., • Address: 19555 North 59th Street, Glendale, AZ 85308. Note: online applications accepted only., • Schedule: Full time schedule; Monday through Friday, hours may vary. More details upon interview., • Requirement: Prior experience using kitchen equipment and batch cooking or working on a grill/fry station is preferred., • Perks: We offer a range of great benefits, including a free shift meal, a two-week holiday break, and PTO!, • Pay Range: $17.00 per hour to $19.50 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1443942. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Join our campus team where you are valued and empowered to make a difference. Enjoy competitive wages, benefits, and perks like Instapay through the One @Work app. Our careers are filled with purpose and encourage learning, growth, and meaningful impact. Apply today! Job Summary Summary: Prepares food in accordance with applicable federal, state and corporate standards, guidelines and regulations with established policies and procedures. Ensures quality food service is provided at all times. Essential Duties and Responsibilities: • Prepares high-quality food items according to standardized recipes and instructions to meet production, delivery and service schedules., • Serves meals or prepares for delivery by using correct portioning, meeting outlined standards, ensuring that food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket collection procedures during service. Responsible for records from area worked during service periods., • Cleans kitchen after preparation and serving, maintaining high standards of cleanliness. Stores or discards excess food in accordance with safe food-handling procedures., • Keeps refrigerators and storerooms clean and neat. Ensures food and supply items are stored per standards., • Operates and maintains kitchen equipment as instructed., • Assists in production planning, record keeping and reporting as required., • Assists in the ordering and receiving of all food and supplies as required., • Reports needed maintenance, faulty equipment or accidents to the supervisor immediately., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables. We are always looking for ways to invest in our people both inside and outside of work to help them achieve their full potential. Both full-time and part-time associates are eligible for the following benefits: • Opportunities for Training and Development, • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program In addition, full-time positions also offer the following benefits to associates: • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program Because this position requires you to perform services in an educational facility, there may be periods when the Company does not require you to perform work (such as winter and summer breaks when food service needs decline or cease). Any such periods during which you do not perform work on the Company’s behalf may be unpaid and deemed a temporary layoff. However, depending on business needs, you may be required to work year-round, potentially at a different location during break periods. Business needs may vary from year to year. Our Commitment to Diversity and Inclusion Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Chartwells Higher Ed maintains a drug-free workplace.

Job Description • We are hiring immediately for full time COOK positions., • Location: Amex Desert Ridge 18850 North 56th Street, Phoenix, AZ 85054. Note: online applications accepted only., • Schedule: Full time schedule; Monday through Friday, hours may vary. More details upon interview., • Requirement: Prior cooking experience is preferred., • Pay Range: $18.00 per hour to $20.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1465444. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Prepares food in accordance with applicable federal, state and corporate standards, guidelines and regulations with established policies and procedures. Ensures quality food service is provided at all times. Essential Duties and Responsibilities: • Prepares high-quality food items according to standardized recipes and instructions to meet production, delivery and service schedules., • Serves meals or prepares for delivery by using correct portioning, meeting outlined standards, ensuring that food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket collection procedures during service. Responsible for records from area worked during service periods., • Cleans kitchen after preparation and serving, maintaining high standards of cleanliness. Stores or discards excess food in accordance with safe food-handling procedures., • Keeps refrigerators and storerooms clean and neat. Ensures food and supply items are stored per standards., • Operates and maintains kitchen equipment as instructed., • Assists in production planning, record keeping and reporting as required., • Assists in the ordering and receiving of all food and supplies as required., • Reports needed maintenance, faulty equipment or accidents to the supervisor immediately., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. Req ID: 1465444 [[req_classification]]

Job DescriptionWith over 50 stores and the largest avocational cooking program in the US, Sur La Table offers an unsurpassed selection of exclusive and premium-quality goods for the kitchen and table – and the culinary expertise and inspiration to go along with it. Whether the job entails interacting with our customers, driving digital growth, or providing vital behind-the-scenes support, we’re all here for the same reason – to roll up our sleeves and create happiness through cooking and sharing good food. Position OverviewAs a Seasonal Kitchen Assistant at Sur La Table, you play a key role in inspiring customers throughout every stage of their culinary experience. With a passion for cooking, hospitality, and teamwork, the Seasona Kitchen Assistant supports the chefs to ensure smooth class operations and a #bestincenter experience, a company-wide standard for excellence in service. You’ll help bring culinary dreams to life by supporting our chefs, engaging with guests, and ensuring a clean, well-organized kitchen environment. Key ResponsibilitiesCustomer Experience & Brand Representation· Represent Sur La Table’s brand and culture by creating memorable, educational experiences that inspire repeat visits and customer loyalty. · Maintains expertise by staying current on products, actively engaging in available training, and independently seeking out additional resources.· Ensure exceptional customer experience by leading a customer-focused, Guest Obsessed culture in both the kitchen and retail sales floor.Sales & Business Performance· Assist chefs with class execution that drives repeat visits and positive customer feedback· Deliver class revenue goals by ensuring high enrollment, positive reviews, and guest return rates.· Consistently meet or exceed monthly sales goals, contributing to overall store revenue. Performance is measured by key KPIs such as individual sales volume, average transaction value, and customer conversion rates.Team Engagement & Store Support· Assist in setting up and breakdown of classes including organizing mise en place, prepping ingredients, and cleaning workstations· Clean and sanitize dishes and equipment promptly to ensure smooth kitchen operations.· Assist with restocking, organizing, and maintaining kitchen supplies and tools to support overall store readinessOperations & Compliance· Ensure compliance with food safety standards, local health codes, and sanitation regulations.· Properly handle all tools, ingredients, and kitchen equipment to maintain a safe and efficient work environment.· Maintain accurate inventory levels, minimize shrink, and control supply and culinary expenses.· May handle liquor, wine, and beer in compliance with state and location alcohol regulations, company policies, including enforcing age restrictions.· Ensure store safety and cleanliness, addressing any maintenance needs promptly.· Adhere to applicable wage and hour laws. Accurately records time worked according to SLT Policy.· Model and ensure consistent adherence to all Sur La Table policies and standard operating procedures (SOPs). Physical Requirements· Ability to communicate verbally and work cooperatively with associates and customers· Ability to remain standing for up to 4 hours at a time· Ability to move about the store directing class participants while selling to customers and retrieving merchandise from stockroom or sales floor· The capability to accurately perceive and differentiate variations in intensity or quality of flavors or odors, or to identify specific tastes or scents using the tongue or nose.· Ability to grab, reach, push, pull, bend, stoop, kneel and crouch to demonstrate, retrieve and/or replenish merchandise and/or cooking equipment.· Ability to use hands to seize, hold, grasp, turn, or otherwise to chop, whisk, slice, stir, juice and/or demonstrate other techniques.· Ability to lift and/or move merchandise weighing up to 50 lbs.· Ability to ascend/descend ladders to retrieve and/or move merchandise· Ability to operate a computer, POS system, keyboards, merchandise scanners and mouse to accomplish work· Available to work between 12 and 16 hours per week, with a flexible schedule, including nights, weekends, and holidays. While this is the minimum availability, scheduled hours may differ based on business needs.· Regular and predictable attendance with the flexibility to adjust class assignments based on demand.· Ability to work in a variable kitchen environment included but not limited to open flames, hot surfaces, temperature variations, various food allergens both physical and airborne Qualifications & Experience· Must be 16 years of age or older at the time of employment.· 1 year retail sales experience, preferred· 1 year food prep and/or kitchen operations experience, preferred· Valid Food Handlers Certification.· Excellent communication, problem-solving, and decision-making abilities.· Passion for community engagement and providing exceptional customer experiences.· Proficiency in Microsoft Office Suite and retail systems preferred.This job description represents a summary of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. Responsibilities, tasks, and duties of the jobholder might differ from those outlined in the job description and other duties, as assigned, may be part of the job. This job description is not an employment agreement or contract. Sur La Table has the exclusive right to alter this job description at any time without notice. The CSC family of brands provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, provincial, state or local laws. It is unlawful in Massachusetts to require or administer a lie-detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. The CSC family of brands is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, please contact . We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Summary Reporting to the Downtown O&M Manager, the Plant Maintenance Tech IV is responsible to provide ongoing operations and maintenance of the district cooling facilities in downtown Phoenix, while observing and complying with all safety requirements. The primary objective is to maintain plant chillers, distribution system, and auxiliary equipment safely and efficiently. Assist in maintenance activities at our Tempe cogeneration facility and remote plant locations. Principle Responsibilities/Key Results Areas • Reviews / understands the operating and maintenance requirements of the main plant, remote plants, and distribution system., • Acquires bids and oversees contractors for maintenance and other services., • Perform scheduled and unscheduled maintenance on plant equipment as directed., • Complete all necessary logs, records, maintenance documentation, and plant paperwork as required., • Perform other duties as assigned by plant management (i.e., facility cleaning, customer heat exchangers, etc.)., • Initiate work requests in Computerized Maintenance Management System (CMMS) for plant equipment requiring maintenance and meet weekly with department manager to schedule, plan, and coordinate work., • Coordinate with operations lead for initiating LOTO’s in computer-based program (Red Tag)., • Attend daily meetings with Leads and Plant Management., • Interprets technical manuals, sketches, prints, instructions, manufacturer’s data and equipment history records and incorporates the applicable information in developing work plans., • Identifies opportunities to improve O&M work processes and leads problem solving analysis when required to address issues and corrective actions while sharing lessons learned and best practices., • Plans and executes routine project maintenance and supports major maintenance and capital replacement projects. Provides coordination between contractors, consultants, and material suppliers on plant projects., • Ensures that all safety policies and regulations are followed, and all daily work is executed in accordance with Cordia’s safety policies. Performs pre-job briefs for critical work activities., • Ensures full compliance with all environmental regulations with a goal of zero exceedances, reportable spills or other violations., • Responsible for ordering and inventory management of spare parts and other plant supplies., • Must be prepared to respond to emergency callout 7 days a week, 24 hours a day. Experience and Education • High School diploma or equivalent., • Must have a minimum of five (5) years of steady work experience, working with and chilled water equipment and water pumps., • Ability to lift up to 50 lbs., • Hands on maintenance and troubleshooting experience with chiller plants., • Knowledge and experience in working with chilled water equipment and water pumps., • Ability to work in adverse climate conditions., • Gathers data; identifies issues; relates and compares; identifies cause-effect; interprets different viewpoints; determines and takes a course of action after identifying and developing possible consequences., • Seeks, acquires, and promptly applies new knowledge and skills, including interpersonal skills, new technology, and emerging industry practices. Adjusts quickly to change. Supports and champions change processes., • Flexibility to work in fast-paced, environment with "hands-on" team player approach., • Results oriented, with ability to work with minimum supervision in order to coordinate and facilitate activities across groups., • Communicates openly to ensure all personnel are informed of plant and equipment conditions., • High integrity, energy and enthusiasm.Company DescriptionCordia is a comprehensive energy solutions provider. We’re driving change towards a more resilient, sustainable energy future, and empowering people and communities to reach their full potential. District Energy systems produce steam, hot water, and/or chilled water at a central plant, then deliver the steam and water to individual buildings through a network of underground pipes. This process is considerably more energy efficient than traditional on-site heating and cooling systems, and typically requires less capital investment, risk, and operational costs than individual boilers or air conditioners.Cordia is a comprehensive energy solutions provider. We’re driving change towards a more resilient, sustainable energy future, and empowering people and communities to reach their full potential.\r\n\r\nDistrict Energy systems produce steam, hot water, and/or chilled water at a central plant, then deliver the steam and water to individual buildings through a network of underground pipes. This process is considerably more energy efficient than traditional on-site heating and cooling systems, and typically requires less capital investment, risk, and operational costs than individual boilers or air conditioners.

Job Description Smart Data Solutions, a leading provider of data management, claim routing and workflow solutions to health plans and TPAs, is looking for a Mailroom Document Processor/Scanner Operator! What you’ll be doing? • Ensuring Hi-Trust certification requirements are met, including but not limited to working on one client at a time, ensuring unprocessed mail is put back on P.O. Box shelf, ensuring processed mail is distributed to the scanning stations, and adhering to Smart Data Solutions Acceptable Use Policy, • Performing all tasks assigned with great attention to detail and in a timely manner, • Maintaining acceptable levels of productivity to align with performance standards, • Must be able to remain in a stationary position for 50% of the time, • Opening, sorting, batching and quality control of documents in a timely manner, • Preparing, verifying, and counting documents for scanning in a timely manner, • Preparing documents for scanning by unfolding/flattening, taping, removing rubber bands, or un-stapling documents in a timely manner, • Fixing tears and making copies of documents, if needed, • Following proper sorting method with appropriate cover sheets as trained, • Properly identifying P.O. Box, client name, and patient name on documents and ensuring mail is processed correctly according to client criteria, • Processing incoming mail based on customer required instructions, • Ensuring assigned work is completed to align with customer service level agreements, • Ensuring that all PHI is kept confidential and complying with all company policies and procedures, • Performing Scanner Operating duties and responsibilities as articulated below when business needs arise, • Scanning, archiving, and quality control of documents, including paper and film, • Inputting appropriate data onto scanner computer screen, such as batch cover sheet information, by manipulating a mouse and typing on a keyboard, • Feeding documents through a scanner in a timely manner, • Keeping provided scanner logs up to date (i.e. storage box logs and company checklist logs), • Troubleshooting and correcting basic technical errors of the scanning machine(s) as they occur, • Operating and cleaning the scanner machines, including any new scanner machines introduced, pursuant to training provided, • Ensuring batches are scanned and placed into appropriate storage boxes, • Verifying batches are accurate before committing such batches, • Performing all tasks assigned with great attention to detail and in a timely manner, • Ensuring that all PHI is kept confidential and complying with all company policies and procedures, • Ensuring assigned work is completed to align with customer service level agreements, • Complying with the Acceptable Use Policy which includes but is not limited to always displaying your SDS-issued photo ID while in the building, • Document Processing (as described above) when business need arises What we’re looking for? Required skills: • Must have ability to lift 45 pounds, • Strong organizational skills and attention to detail, • Manages time effectively and is dependable, • Communicate effectively, • Computer literacy, • Dependable, • 40+ WPM typing speed, 4500 KPH ten key. Why this is the company for you? Top Benefits & Perks: • A company culture that is authentic, innovative, and collaborative! Our most powerful strength is our people! We build impactful solutions for our customers - their success is our success!, • A professional development and growth-oriented workplace, • Generous benefits including, health insurance, short-term, and long-term disability, • 401(k) with a company match to provide a better future in your retirement years Smart Data Solutions (SDS) is a technology leader in healthcare process automation and interoperability. As a strategic partner, SDS helps clients digitally transform their operations, delivering tangible value through reduced costs, streamlined workflows, and an improved customer experience. With data, AI, and automation at its core, SDS provides solutions in Digital Mailroom and Data Capture, Clearinghouse, Intelligent Medical Records, Prior Authorization and Claim Operations. Trusted by over 500 clients—including multiple Blue Cross Blue Shield plans, regional health plans, TPAs, providers, and healthcare partners—SDS streamlines complex front, middle, and back-office operations. Smart Data Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.

Job Description • We are hiring immediately for a full time COOK position., • Location: BD Tempe - 850 Rio Salado Parkway, Tempe, AZ 85281. Note: online applications accepted only., • Schedule: Full time schedule; Monday through Friday, 6:00 am to 2:30 pm. More details upon interview., • Fixed Pay Rate: $20.00 per hour. Free meals, uniforms and laundering service available at select locations. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1473181. The advertised program is an AI recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! What makes FLIK click? Our people. The decisions, actions and attitudes of our associates earn the trust and loyalty of our clients every day. We know how to pick them and we know how to grow them. It starts with hiring people who share our passion for food and hospitality. Once we find the right talent, we encourage, value and recognize their contributions. We keep our people renewed, excited and engaged by providing hands-on training and educating them about the latest trends. We give them a stake in successfully raising the bar. Our people love what they do and they love sharing their passion. Join our team and see the FLIK difference. Where a job isn’t merely a job but the start of a career where you can flourish. Job Summary Summary: Prepares food in accordance with applicable federal, state and corporate standards, guidelines and regulations with established policies and procedures. Ensures quality food service is provided at all times. Essential Duties and Responsibilities: • Prepares high-quality food items according to standardized recipes and instructions to meet production, delivery and service schedules., • Serves meals or prepares for delivery by using correct portioning, meeting outlined standards, ensuring that food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket collection procedures during service. Responsible for records from area worked during service periods., • Cleans kitchen after preparation and serving, maintaining high standards of cleanliness. Stores or discards excess food in accordance with safe food-handling procedures., • Keeps refrigerators and storerooms clean and neat. Ensures food and supply items are stored per standards., • Operates and maintains kitchen equipment as instructed., • Assists in production planning, record keeping and reporting as required., • Assists in the ordering and receiving of all food and supplies as required., • Reports needed maintenance, faulty equipment or accidents to the supervisor immediately., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables. Both full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Flik maintains a drug-free workplace.

Job Description • We are hiring immediately for full time SENIOR COOK positions., • Location: Dexcom - 2160 West Broadway Road, Suite 107, Mesa, AZ 85202. Note: online applications accepted only., • Schedule: Full time schedule; Monday through Friday, 6:00 am to 3:00 pm. More details upon interview., • Requirement: Prior cooking experience is preferred., • Fixed Pay Rate: $21.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1463999. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Prepares food to ensure it is nutritious and properly flavored in accordance with applicable federal, state, local and company standards, guidelines and regulations. Essential Duties and Responsibilities: • May oversee the cooking activities of food service associates as assigned by Food Service Director., • Prepares various entrees and menu items following established recipes., • Operates and cleans equipment after each use. Performs scheduled routine cleaning., • Stores, labels and dates food items according to policy. Helps maintain organized storage of dry goods and refrigerated and frozen products., • Follows HACCP guidelines to ensure quality and safety of food supply., • Complies with federal, state and local health and sanitation regulations and department sanitation procedures., • Assists Food Service Director in maintaining accurate daily production records and completes all required documentation, reports, and logs as assigned., • Assists in the cross training of employees. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. Req ID: 1463999 [[req_classification]]

Job Description Power Plant Mechanic III Summary Reporting to the Plant Manager, the Power Plant Maintenance Mechanic is responsible for day-to-day preventative maintenance and repair of the at Arizona State University power, steam and chilled water facilities while assisting with maintenance activities at the downtown Phoenix plants as needed. The primary objective is to ensure the plants are operated and maintained with regard to the priorities in order: Safety, Reliability and Efficiency. Principle Responsibilities/Key Results Areas Reviews and understands the operating and maintenance requirements of the main plant, remote plants, and distribution system. • Performs scheduled and unscheduled maintenance of plant equipment., • Initiates work requests in Computerized Maintenance Management System (CMMS) for plant equipment requiring maintenance and meet weekly with plant management to schedule, plan, and coordinate work., • Interprets technical manuals, sketches, prints, instructions, manufacturer’s data and equipment history records and incorporates the applicable information in developing work plans., • Identifies opportunities to improve O&M work processes and leads problem solving analysis when required to address issues and corrective actions while sharing lessons learned and best practices., • Completes all necessary logs, records, maintenance documentation, and plant paperwork., • Coordinates with operations for initiating LOTOs in computer-based program (RedTag)., • Acquires and reviews bids and oversees contractors for maintenance and other services. Provides coordination between contractors, consultants, and material suppliers on plant projects., • Plans and executes routine project maintenance and supports major maintenance and capital replacement projects utilizing Cordia Project Management Policies., • Ensures that all safety policies and regulations are followed, and all daily work is executed in accordance with Cordia safety policies., • Ensures full compliance with all environmental regulations with a goal of zero exceedances, reportable spills or other violations., • Responsible for ordering and inventory management of spare parts and other plant supplies. Experience and Education • High School diploma or equivalent., • Must have a minimum of five (5) years of steady work experience, maintaining power, steam, and/or chilled water equipment., • Hands on maintenance and troubleshooting experience with cogeneration and/or central heating and cooling plants., • Proficiency in contract management and proven skills in leading/directing contractors., • Knowledge and experience in working with power, steam and/or chilled water equipment., • Gathers data; identifies issues; relates and compares; identifies cause-effect; interprets different viewpoints; determines and takes a course of action after identifying and developing possible consequences., • Seeks, acquires, and promptly applies new knowledge and skills, including interpersonal skills, new technology, and emerging industry practices. Adjusts quickly to change. Supports and champions change processes., • Flexibility to work in fast-paced, environment with "hands-on" team player approach., • Results oriented, with ability to work with minimum supervision in order to coordinate and facilitate activities across groups., • Communicates openly to ensure all personnel are informed of plant and equipment conditions., • High integrity, energy and enthusiasm., • Ability to work in adverse climate conditions., • Ability to lift up to 50 lbs.Company DescriptionCordia is a comprehensive energy solutions provider. We’re driving change towards a more resilient, sustainable energy future, and empowering people and communities to reach their full potential. District Energy systems produce steam, hot water, and/or chilled water at a central plant, then deliver the steam and water to individual buildings through a network of underground pipes. This process is considerably more energy efficient than traditional on-site heating and cooling systems, and typically requires less capital investment, risk, and operational costs than individual boilers or air conditioners.Cordia is a comprehensive energy solutions provider. We’re driving change towards a more resilient, sustainable energy future, and empowering people and communities to reach their full potential.\r\n\r\nDistrict Energy systems produce steam, hot water, and/or chilled water at a central plant, then deliver the steam and water to individual buildings through a network of underground pipes. This process is considerably more energy efficient than traditional on-site heating and cooling systems, and typically requires less capital investment, risk, and operational costs than individual boilers or air conditioners.

Job Description Position Overview - THIS POSITION IS LOCATED IN KAILUA-KONA HAWAII (Relocation Assistance) We seek an exceptional Executive Housekeeper to oversee all household operations for a prestigious private estate. This senior-level position requires a seasoned professional who can maintain the highest standards of luxury service while managing diverse household operations with discretion and excellence. Key Responsibilities Staff Management & Leadership • Supervise and coordinate a team of housekeeping, and domestic staff, • Train new staff members on estate protocols and service standards, • Schedule staff assignments and manage work rotations, • Conduct performance evaluations and provide ongoing coaching, • Oversee daily cleaning, maintenance, and organization of all estate areas, • Ensure impeccable standards of cleanliness throughout the property, • Manage deep cleaning schedules and special project coordination, • Supervise care and maintenance of fine furnishings, artwork, and collectibles, • Maintain comprehensive inventory of household supplies, linens, and equipment, • Source and purchase high-quality products and materials, • Manage vendor relationships and negotiate service contracts, • Track expenses and maintain detailed records, • Collaborate with security, groundskeeping, and maintenance teams, • Coordinate household activities around family schedules and events, • Prepare spaces for entertaining, meetings, and special occasions, • Liaise with property management and estate administrators, • Ensure guest accommodations meet luxury hospitality standards, • Coordinate special requests and personalized services, • Oversee preparation of guest quarters and common areas, • Maintain detailed preferences and service notes for regular visitors Required Qualifications Experience & Background • Minimum 5-7 years of experience in luxury estate management or high-end hospitality, • Proven track record supervising household staff teams, • Experience managing operations in properties exceeding 10,000 square feet, • Exceptional attention to detail and commitment to excellence, • Strong leadership and team management abilities, • Excellent written and verbal communication skills, • Advanced organizational and time management capabilities, • Absolute discretion and confidentiality in all matters, • Professional demeanor and polished presentation, • Flexibility to work varying schedules, including evenings and weekends, • Cultural sensitivity and adaptability to diverse family needs, • Formal training in hospitality management or related field, • Experience with smart home technology and estate management software, • Knowledge of fine textiles, antiques, and luxury goods care, • Multilingual capabilities, • Valid driver's license and reliable transportation Compensation & Benefits We offer a highly competitive compensation package commensurate with experience, including: • Excellent salary $95K - $115K, • Comprehensive health, dental, and vision insurance 100% paid for my employer, • Retirement savings plan with employer matching, • Paid time off and holiday schedule, • Professional development opportunities Company DescriptionSince 2000, Gecko Hospitality and its dedicated Franchise Partners and Recruiters throughout the United States have been pioneers in the hospitality recruiting industry. The value that Gecko Hospitality provides to its Clientele is evident in the advanced networking and technology skills our professional recruiters possess in identifying qualified restaurant professionals. At Gecko Hospitality, we are passionate about making sure that every member of our recruiting team is familiar with our philosophies. In the same way that we learn about people when developing relationships and friendships, we want our people to have a sense of Gecko Hospitality's values and insight into our company's "personality." With this insight comes a greater understanding of how values "fit" with Gecko Hospitality's values, why we do things the way we do as well as providing a basis for making decisions that are appropriate to those values. We all play a part in keeping these traditions and philosophies alive. We want every member of our recruiting team to understand that we are only as good as how well we follow these philosophies on an every day basis. Gecko Hospitality is all about achieving results by being motivated. This motivation to achieve results comes from within. No one can motivate us, nor can we motivate anyone else. As leaders, all that we can do is provide an environment where people motivate themselves to achieve mutually beneficial goals. Along with this philosophy, each team member possesses the following traits for which we are proud: honesty, integrity, desire, determination, listening skills, rapid learning, responding in a timely manner, effective communication skills, thoroughness, empathy, compassion, and most of all we want every team member to have a strong work ethic that motivates them to produce superior results both for our candidates and for our Clients. At Gecko Hospitality, you certainly have... more choices As part of our recruiting process, we may contact you regarding positions we feel are a good fit or engage with you via SMS text message. By clicking to submit your application, Gecko Hospitality has your consent to communicate via SMS text message moving forward. Terms of Service are available at Privacy Policy can be found at Message and data rates may apply, depending on your mobile phone service plan. For more help reply “HELP” to your texts or you can opt-out by replying STOPSince 2000, Gecko Hospitality and its dedicated Franchise Partners and Recruiters throughout the United States have been pioneers in the hospitality recruiting industry. The value that Gecko Hospitality provides to its Clientele is evident in the advanced networking and technology skills our professional recruiters possess in identifying qualified restaurant professionals.\r\n\r\nAt Gecko Hospitality, we are passionate about making sure that every member of our recruiting team is familiar with our philosophies. In the same way that we learn about people when developing relationships and friendships, we want our people to have a sense of Gecko Hospitality's values and insight into our company's "personality." With this insight comes a greater understanding of how values "fit" with Gecko Hospitality's values, why we do things the way we do as well as providing a basis for making decisions that are appropriate to those values. We all play a part in keeping these traditions and philosophies alive.\r\n\r\nWe want every member of our recruiting team to understand that we are only as good as how well we follow these philosophies on an every day basis. Gecko Hospitality is all about achieving results by being motivated. This motivation to achieve results comes from within. No one can motivate us, nor can we motivate anyone else. As leaders, all that we can do is provide an environment where people motivate themselves to achieve mutually beneficial goals. Along with this philosophy, each team member possesses the following traits for which we are proud: honesty, integrity, desire, determination, listening skills, rapid learning, responding in a timely manner, effective communication skills, thoroughness, empathy, compassion, and most of all we want every team member to have a strong work ethic that motivates them to produce superior results both for our candidates and for our Clients.\r\n\r\nAt Gecko Hospitality, you certainly have... more choices\r\n\r\nAs part of our recruiting process, we may contact you regarding positions we feel are a good fit or engage with you via SMS text message. By clicking to submit your application, Gecko Hospitality has your consent to communicate via SMS text message moving forward.\r\nTerms of Service are available at Policy can be found at and data rates may apply, depending on your mobile phone service plan. For more help reply “HELP” to your texts or you can opt-out by replying STOP

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Mechanic , you will service and maintain our fleet of state-of-the-art, high performance, high speed electric go karts. The right candidate will have a track record of mechanical repair experience, preferably in the golf kart, go kart, motorcycle, or motorsports field, and will be self-motivated and be able to work in a fast-paced environment. Is this you? Duties and Responsibilities • Perform opening track and kart repairs and performance checks, • Maintain kart performance throughout the day, • Maintain track and facility appearance and functionality, • Keep accurate documentation of repairs, parts inventory, and special projects, • Responsibly maintain supply of tools and machinery, • Respond to emergency situations as they arise, • Ensure that the pit, kart shop and track areas remain clean and safe, • Assist the track crew with track operations in limited situations, • Perform specific facility cleaning and maintenance duties as assigned by management, • Perform closing duties to secure the pit and track and prepare for the following day's operation, • Must be at least 18 years of age, • High school diploma or general education degree (GED); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience., • A Drug Test and Background Check is required prior to employment, • Provide proof of identity and eligibility to work in the United States, • Standing over 2/3 of time, • Walking over 2/3 of time, • Lifting is required

Job Description Sonographer (Obstetrics) Location: Phoenix, Arizona Schedule: Standard business hours Setting: Outpatient Women’s Health / OB/GYN Clinic Job Type: Full-time Compensation & Benefits • Hourly Pay: $55 – $65 (based on experience and certification), • Comprehensive Benefits Package Includes:, • Medical, dental, and vision insurance, • Paid time off (PTO) and separate sick leave, • 401(k) plan with employer contributions About the Role We are seeking an experienced and detail-oriented Sonographer specializing in Obstetrics. In this role, you will perform pelvic and obstetrical ultrasounds as well as procedures such as sonohysterograms, amniocentesis, and chorionic villi sampling. You’ll be an essential part of the patient care team, ensuring accurate imaging, supporting physicians with findings, and providing compassionate care in an outpatient clinical setting. Key Responsibilities • Review daily ultrasound schedule and prepare patient and referral information, • Enter ultrasound orders into Athena to ensure system communication, • Escort patients to the ultrasound suite and explain procedures, • Prepare patients and rooms for ultrasounds and procedures, • Perform ultrasounds, capturing all necessary images, measurements, and Doppler samples, • Generate reports in Viewpoint and ensure accurate data transfer, • Present images and preliminary findings to physicians when abnormalities are detected, • Bill for completed ultrasound services, • Maintain ultrasound equipment, including probe cleaning and sterilization, • Monitor supply needs and request orders as necessary, • Report equipment issues with GE, Philips, Viewpoint, or office systems, • Participate in quality assurance tasks, HIPAA, and OSHA trainings, • Support training and mentoring of new sonographers Qualifications • Diagnostic Medical Sonography certification (required), • Current CPR/BLS certification (required, must be maintained), • Nuchal Translucency certification (required), • Minimum of 10 ultrasound CMEs annually, • Strong communication and organizational skills, • Ability to manage high-pressure or emergent situations with professionalism, • Patient-centered approach with strong teamwork and collaboration skills Why Join Us? This is an excellent opportunity for a Sonographer passionate about women’s health and obstetrics to thrive in a supportive outpatient environment. You’ll work alongside skilled providers, contribute directly to patient care, and continue advancing your clinical expertise in obstetric imaging. How to Apply If you are ready to take the next step in your career, please submit your most recent resume or CV for confidential consideration.

Job DescriptionJob Title: Instrument Operator Department: Operations Reports To: Crew Chief Location: Phoenix, Arizona The Instrument Operator plays a crucial role in our surveying team, responsible for assisting the Crew Chief and surveying personnel in field survey operations. This role involves the operation and maintenance of surveying instruments, data collection, and ensuring the accuracy of survey data. The Instrument Operator contributes to the successful completion of survey projects. Some travel is required for this position. Key Responsibilities Field Survey Support • Assist the Crew Chief and crew members in setting up and operating surveying instruments, including total stations, GPS receivers, levels, and data collectors., • Maintain and calibrate survey equipment to ensure accurate operation measurements., • Operate surveying instruments to collect field data, including measurements, angles, distances, and elevations., • Follow Landpoint and Client specific safety protocols and guidelines during field operations to ensure a safe working environment., • Assist in the maintenance, cleaning, and storage of survey vehicles, equipment, and tools., • Transfer and organize field data into digital formats for further processing., • High school diploma or equivalent; additional education or coursework in land surveying is a plus., • Previous experience as a Survey Instrument Operator or in a related role is advantageous., • Experience in T&D, renewables, and construction staking preferred., • Familiarity with surveying instruments and data collection tools., • Basic understanding of surveying principles and procedures., • Strong attention to detail and the ability to maintain data accuracy., • Effective communication and teamwork skills., • A willingness to work outdoors in varying weather conditions. Physical Requirements include but are not limited to the following: • Continuously stand for up to 10 or more hours per day., • Lift or carry up to 50 +/- lbs of necessary supplies from the truck to the crews in the field., • Must have the ability to traverse creeks and steep slopes., • Climb Fences, • Walk up to 5 miles per day., • Work outdoors in various weather and topographical conditions for long periods of time. Outdoor temperatures can range from above 100 degrees F to below zero degrees F., • Hours worked are typically 8 hours/day 5-6 days/week (not guaranteed). Schedule driven projects may require more than 10 hours/day and up to 7 days/week., • Drive up to 500 miles per day., • Bend / Stoop up to 25 or more times per day., • Understand potential outdoor hazards associated with working outdoors such as obstacles, straddling, climbing, crawling, and wading in order to traverse obstacles., • Be aware of the various hazards associated with the different geographic regions of the U.S. Some of those hazards include but are not limited to:, • Animal Hazards such as mosquitoes, snakes, ticks, gators, bears, etc., • Poisonous Plants such as poison ivy/oak, briars, thorns, sumac, cactus, etc., • Extreme weather conditions such as snow, wind, rain, dust, etc. WUWfP5wSTR

Job Description JOB DESCRIPTION Summary: Our Sonographer position plays a vital role in providing diagnostic imaging and monitoring prenatal and gynecological conditions for our patients and assisting the doctors in the diagnosis and treatment of various medical conditions. Essential Functions: • Perform accurate OB/GYN ultrasound procedures and scans of internal organs, tissues, and blood flow., • Analyze and evaluate images assessing the quality and clarity of images., • Prepare exam rooms and ultrasound equipment to conduct sonography examinations in accordance with infectious disease, sterilization, and patient safety protocols, policies, and procedures., • Effectively communicate and prepare patients for exams by explaining procedures and answering questions and concerns., • Create and maintain accurate records of ultrasound procedures, including patient data, images, and relevant information., • Secure patient information and maintain patient confidence by completing and safeguarding electronic and paper medical records; completing diagnostic coding and procedure coding; keeping patient information confidential., • Maintain equipment for proper sterilization and functionality. Primary Duties: • Prepare exam rooms for patients including stocking with proper supplies and cleaning after each patient visit., • Ensure patients comfort during the scan, especially in sensitive or emotional situations., • Evaluate images to ensure they are clear and usable for diagnostic purposes., • Maintain accurate and timely patient documentation in EHR system., • Sterilize equipment and exam rooms after each patient visit., • Communicate findings and provide detailed reports to physicians to further review., • Coordinate and collaborate with team members., • Strong knowledge of medical terminology, human anatomy and physiology, especially in the areas related to obstetrics and gynecology., • Knowledge of how sound waves interact with tissues and how to optimize images based on varying patient conditions., • Knowledge of the different types of ultrasounds (2D, 3D, doppler) and when to use each for optimal results., • Knowledge of patient privacy laws safety protocols, and infection control standards., • Excellent communication and interpersonal skills to effectively communicate diagnostic findings to patients and physicians., • Patient care skills to ensure the comfort of the patient and to provide emotional support., • Ability to detect subtle abnormalities in ultrasound images and provide accurate information., • Ability to stand for extended periods of time and position patients appropriately for scans., • Work is performed in a professional healthcare setting with 5 OB/GYN physicians in a family atmosphere., • We have one location, no travel required., • Ability to lift and move medical equipment and supplies up to 25 pounds, • Extended periods of standing and walking., • Education: Associates degree or equivalent from 2-year college or technical school., • Certifications: Diagnostic Medical Sonography, • Experience: 4 years of experience conducting sonograms in an OB/GYN setting., • Preferred experience: High risk obstetrics experience preferred Powered by JazzHR GSbTIAsrxb

Job Description Swiss Screw Machinist Aerospace & Defense Manufacturing Location: 3617 E La Salle St, Phoenix, AZ 85040 (40th St and Southern) Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. Shift options: Day shift OR Night shift Swiss Screw Machinist RESPONSIBILITIES: • Operate CNC machines without oversight running proven production and NPI jobs, • Ability to process trouble shooting all jobs that run in the department, • Ability to setup any job including NPI and effectively demonstrate proper setup techniques, loading, indicating, touch off, of all tooling. Ability to load programs and verify correct operation, revision, etc. Cutting jaws and loading of needed fixtures. First piece buy-off, • Ability to modify speeds and feeds and conduct process improvements to increase quality and cycle time reductions, • Mentor and train process operators with regard to process operation and process quality. Ability to train level 1 and 2 machinists on use of equipment, inspection, tooling, etc., • Daily machine maintenance (checking fluid levels, cleaning out chips, etc.), • Maintaining a clean and organized work space, • Complete understanding of CNC controls including G & M program codes, • Tool management, entering in offsets to compensate for tool wear etc. Replacement of worn and damaged tools (inserts, boring bars, end mills, drills, etc.), • Ability to read and have a clear understanding of B/P’s including assemblies, dimensions, tolerances, symbols, notes, abbreviations, GD&T (geometric dimensioning and tolerancing), and any other standard nomenclature per customer, government, or industry standards, • Proper use of basic inspection, measuring and test equipment to verify machined dimensions of product. Working knowledge of the use of dial bore gages, air gages, intertest gages, etc., • In-process inspection of parts machined. Recording inspection data at the prescribed intervals per the inspection traveler or other company paperwork, • Filling out MOT and job routers, • Maintaining correct part counts on the MOT for the operations performed, • Tagging hardware and recording discrepancies on proper paperwork for hardware known to be discrepant. Notify lead personnel upon discovery upon discovery, • Communicate any job related issues/questions (part feature, program, inspection, etc.) to lead personnel for resolution and or clarification, • Reporting all machine collisions and malfunctions to lead personnel, • Adhering to all company and industry safety standards and protocols. Understanding of industry buy-off requirements, company specific handling & FOD requirements, product identification requirements, filling out company paperwork properly (MOT, Inspection Travelers, Job Sheets, etc.), • Bar Loader:, • Clean loader and maintain correct oil level, • Load bars as needed to keep production running, • Ensure the bar material is labeled with the correct job#. Label as necessary, • Remove bar remnants from last job ran, • Change out channels, pusher, flag, and J-Rings to fit next job bar size requirement, • Input all data necessary into bar loader, bar stock, channel size, part length, and set end of bar when setting up next job, • Make sure all sensors are working correctly, • Return all channels, pusher, and J-Rings from previous job to correct storage location in department, • Ability to use computer software, company ERP system, clocking in and out of jobs, etc., • 5+ years’ experience running CNC lathes, • Complete understand G & M codes for Fanuc based programming, • Good understanding of GD&T and industry standards of inspection, • Minimum High School Diploma or trade school, • Must be at least 18 years old and Authorized to work in the US, • Must be able to lift up to 20 pounds on a regular basis. The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: • The Civil Rights Act of 1964 as Amended, • Age Discrimination Act of 1967 as Amended, • Rehabilitation Act of 1973, • Vietnam Era Veterans Readjustment Act of 1974, • Americans with Disabilities Act Amendment Act of 2009 (ADAAA), • The Wagner-Peyser Act as Amended., • The Workforce Innovation and Opportunity Act, • Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands—including Curaleaf, Select, and Grassroots—offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Title: Production Technician Starting Pay: $16.00/hr Location: Phoenix, AZ Job Type: Full Time | Non-Exempt Shift: Tuesday - Friday | 6:00am - 4:30pm Who You Are: You're a hands-on production pro who thrives in a fast-paced, quality-driven environment. With an eye for detail and a steady focus on consistency, you take pride in packaging and labeling premium cannabis products—from dried flower and pre-rolls to vape cartridges, pens, and infused items. You enjoy working with clear procedures, following safety and compliance standards, and collaborating with teammates to keep operations running smoothly. Your reliability and commitment to accuracy ensure every finished product meets Curaleaf's high standards before it reaches our customers. What You Will Do: As a Production Technician at Curaleaf, you'll play a key role in delivering high-quality cannabis products by supporting every stage of the packaging process. In this fast-paced, hands-on role, you will: • Stage products and packaging materials across production lines while performing quality assurance checks to meet daily schedules and Curaleaf's high standards, • Boost operational efficiency and minimize waste by taking ownership, collaborating with the team, and communicating effectively, • Conduct in-process and final quality checks, including testing, visual inspections, and precise weighing, while maintaining 100% compliance in data recording, product tracking, and secure packaging, • Work quickly and efficiently to boost productivity while keeping the extraction room organized, clean, and inspection-ready, • You are eager to learn and can be trained on various production equipment and SOPs while consistently meeting performance expectations set by leadership, • You bring strong attention to detail and effective communication skills, thriving in a fast-paced, team-based production environment, • You can comfortably perform repetitive tasks with focus and consistency over extended periods, • You have a strong work ethic, are punctual and reliable, and help maintain a positive, professional team environment, • Ability to stand, sit, and walk for extended periods of time (8-10 hours per shift), • Ability to lift and carry up to 50 pounds regularly and occasional lifting of heavier items with assistance, • Frequent and repetitive use of hands and wrists for extended periods of time, • Repetitive bending, squatting, and reaching, • Ability to climb ladders or step stools to access plants or equipment, • Exposure to environments with high humidity, varying temperatures, and strong odors (such as cannabis), • Exposure to soil, water, fertilizer, dust, pollen and plant pathogens, • Exposure to cleaning solvents, such as high volumes of isopropyl alcohol, • Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms, • Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels Curaleaf Pay Transparency$16—$16 USD What We Offer: • Career Growth Opportunities, • Competitive Pay and Benefits, • Generous PTO and Parental Leave, • 401(K) Retirement Plan, • Life/ Disability Insurance, • Community Involvement Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, JAMS, Find and Zero Proof provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is the largest vertically integrated cannabis company in Europe with a unique supply and distribution network throughout the European market, bringing together pioneering science and research with cutting-edge cultivation, extraction, and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: • Lead and Inspire., • Commit to Win., • ONE Curaleaf. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.

Job Description We are seeking a highly analytical and detail-oriented Logistics Data Analyst with a minimum of 5 years of experience in data analysis related to sales performance and inventory levels. This role is critical to optimizing our supply chain operations, improving forecasting accuracy, and supporting strategic decision-making across logistics and sales functions. Essential Job Duties & Responsibilities: • Analyze sales trends and inventory data to identify patterns, risks, and opportunities for optimization., • Develop and maintain dashboards and reports that provide actionable insights to logistics, sales, and operations teams., • Collaborate with cross-functional teams to align inventory planning with sales forecasts and customer demand., • Monitor key performance indicators (KPIs) such as inventory turnover, stockouts, and order fulfillment rates., • Support demand planning and replenishment strategies using historical data and predictive analytics., • Identify inefficiencies in inventory management and recommend data-driven solutions., • Ensure data integrity across ERP and inventory systems; troubleshoot discrepancies and improve data workflows. Strong proficiency in data analysis tools such as Excel, SQL, Power BI, Tableau, or similar platforms. • Experience working with ERP systems (e.g., SAGE100, Ariba)., • Solid understanding of inventory management principles and sales forecasting techniques., • Excellent communication skills and ability to translate complex data into actionable insights., • Detail-oriented with strong problem-solving and organizational skills., • Bachelor’s Degree in Supply Chain Management, Business Analytics, Statistics, or related field. SCREEN Semiconductor Solutions, Co., Ltd is a manufacturer of semiconductor equipment for the lithography coat/develop and wet cleaning/etching processes. SCREEN is well known in the industry for manufacturing the most reliable equipment used in the production of semiconductor wafers and has won high marks year after year for its equipment reliability.SCREEN SPE USA, LLC\r\nSCREEN SPE USA (SEUS) was established in 1987 in Sunnyvale, California. SEUS is a sales, marketing, engineering and service organization responsible for operations in the US market for SCREEN Holdings Co., Ltd, Kyoto, Japan. SEUS now has 8 major local offices in the US to better serve our customers.\r\n\r\nSCREEN Semiconductor Solutions, Co., Ltd is a manufacturer of semiconductor equipment for the lithography coat/develop and wet cleaning/etching processes. SCREEN is well known in the industry for manufacturing the most reliable equipment used in the production of semiconductor wafers and has won high marks year after year for its equipment reliability.

Job Description EyeCare Partners is the nation's leading provider of clinically integrated eye care. Our national network of over 300 ophthalmologists and 700 optometrists provides a lifetime of care to our patients with a mission to enhance vision, advance eye care and improve lives. Based in St. Louis, Missouri, over 650 ECP-affiliated practice locations provide care in 18 states and 80 markets, providing services that span the eye care continuum. For more information, visit . Company: Desert Vista Eye Specialists Job Title: Ophthalmic Technician Department: Ophthalmology Reports To: Clinic Supervisor Location: Mesa, AZ SUMMARY An Ophthalmic Technician is a valuable asset to an Ophthalmologist as they assist in providing excellent patient care to the patients during their visit. This employee is able to handle a wide range of duties while using equipment to perform the initial testing needed to prepare a patient for an exam with an Ophthalmologist. ESSENTIAL DUTIES AND RESPONSIBILITIES • Provide exceptional customer service during every patient encounter (in person or via phone), • Display a professional attitude, greet patients promptly with a smile, and thank them when they leave, • Anticipate Physician needs to facilitate the flow of the clinic, • Practice urgency at all times with patient's time, as well as doctor's time and schedule, • Comply with all company policies and procedures, including HIPAA, • Verify patient's information by interviewing patient, • Record patient's medical history and current medications and confirm purpose of visit, • Record all data in the patient's Electronic Medical Record (EMR), • Check condition of patient's eyes by observing pupils, muscles, visual acuity, and extraocular movements, • Required skills include: dilation, refraction, pressures, and performing a variety of diagnostic tests including visual fields, OCT, GDX, IOL master, auto refractor and topography, • Demonstrates working knowledge of eye anatomy, diseases, symptoms and ocular medications, • Accurately and thoroughly document medical visits and procedures as they are being performed by the Physician, • Prepare patients for treatments and minor procedures; measure and record vital signs (blood pressure, pulse, and respiration rate) as required, • Open and close exam rooms as needed, • Keep examination, treatment, laser and any other assigned rooms cleaned and stocked with supplies, and keep drug count up to date., • General office duties and cleaning to be assigned by manager QUALIFICATIONS • Provides excellent patient care and is energetic and empathetic with patients, • Must comply with HIPAA confidentiality standards when communicating patient information, • Communication skills and the ability to coordinate and cooperate with all levels of employees in a courteous, professional manner at all times, • Organizational skills with focus on tracking patient care and improving patient flow, • Desire to gain industry knowledge and training, • Demonstrates initiative in accomplishing practice goals, • Ability to grow, adapt, and accept change, • Consistently creates a positive work environment by being team-oriented and patient-focused, • Commitment to work over 40 hours to meet the needs of the business, • Ability to work weekends when applicable, • Reliable transportation that would allow employee to go to multiple work locations with minimal notice EDUCATION AND/OR EXPERIENCE • Minimum Required: High school diploma or general education degree (GED) required, • Minimum Required: One year of related experience and/or training; or equivalent combination of education and experience LICENSES AND CREDENTIALS • Current Certified Ophthalmic Assistant (COA) or Certified Ophthalmic Technician (COT) certification is preferred, but not required SYSTEMS AND TECHNOLOGY • Proficient in Microsoft Excel, Word, PowerPoint, Outlook, • Experience using Electronic Medical Records (EMR) systems, • Computer proficiency and ability to quickly learn new applications PHYSICAL REQUIREMENTS • This role requires a variety of physical activities to effectively perform essential job functions. The position involves frequent walking (75%), sitting (50%), and standing (50%), with regular bending, stooping, and reaching (25–50%). Employees must be able to lift, carry, push, and pull items up to 25 lbs. Strong fine motor skills and full use of hands are essential, as the role demands constant grasping, writing/typing, and use of technology. Visual and auditory acuity—including color, depth, peripheral vision, and the ability to adjust focus—is required 100% of the time. Occasional driving or climbing may also be necessary. If you need assistance with this application, please contact (636) 227-2600. Please do not contact the office directly – only resumes submitted through this website will be considered. EyeCare Partners is an equal opportunity/affirmative action employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description Join the Growing Branded Bills Legacy & Shape Our Future! Job Summary: The Branded Bills Production Specialist is a hands-on and vital member of our expanding Key Responsibilities: ● Production Operations: • Operate machinery and equipment according to established procedures., • Assemble, inspect, and package products on the production line., • Inspect finished products for defects and ensure they meet quality standards., • Report any discrepancies or malfunctions to the supervisor promptly., • Load raw materials into machines and move finished products to designated areas., • Record production data, including output, downtime, and material usage., • Follow all safety guidelines and wear required protective equipment., • Perform routine maintenance or cleaning on production equipment., • Notify the maintenance team of any issues requiring repairs, • Operate machinery correctly and maintain it with care. Qualifications: • High school diploma or equivalent;, • Previous experience in a manufacturing or production environment (preferred)., • Ability to operate or learn to use production machinery and tools., • Strong attention to detail and accuracy., • Strong attention to detail and ability to meet deadlines., • Standing, bending, and lifting for extended periods., • The role involves physical activity, including standing, walking, and lifting up to 50 pounds., • Paid Time Off, • Health insurance, • 401k benefits, • Employee discount

Job DescriptionCelerion is committed to swift, exceptional clinical research through translational medicine. Every day, we use our experience, agility, and innovative research strategies to help get drugs to market faster. Responsible for the review of all source data and ensure all applicable data is entered into its respective database and/or Case Report Form (CRF). Ensure the completeness, accuracy, and consistency of source data and CRF data entry so that it meets the standard of quality expected for reporting to Sponsors and regulatory bodies. Participate with auxiliary teams involved in study set up, conduct, and data cleaning of clinical trials.Essential Functions • Attend study setup meetings to determine QC criteria and timelines for each study, • Review study-specific source documents to ensure all forms are accurate prior to study start and that all data collected is in accordance with study-specific Case Report Forms and protocol requirements., • Ensure QC reviews are complete in accordance with study-specific timelines, • Review source data on an ongoing basis to ensure the following: Clinical source data is complete according to GCP and FDA guidelines, protocol deviations (if applicable) are documented, and source data is collected in accordance with Sponsor requirements, and Celerion SOPs/PGs. Ensure data corrections are completed according to GCP guidelines, and Celerion SOPs/PGs. Complete a Final QC to ensure all source data is accounted for and has been QC reviewed, • Perform accurate data entry and verification for Celerion Standard and Sponsor Provided EDCs., • Archive source documentation including CRFs, • Complete QC/DE dedicated milestones in a timely manner, • Perform standard quality control stepsRequirements, • High School Diploma or GED (relevant internal Celerion experience in lieu preferred), • 1 - 2 years industry experience preferred, • Previous Quality Control/ Data Entry or related experience preferred, • Medical Terminology Training preferred, • Excellent oral and written communication skills, • Ability to organize and manage multiple priorities, • Experience working in an environment with complex processes and defined criteria, • Excellent time management skills required, • Proficient in MS Office applications required

Job Description Flow Distribution is seeking a Lab Extractor to assist with various tasks in our busy cannabis extraction lab. This position will be able to work quickly and efficiently while also multitasking. The Extraction Technician will extract raw cannabis plant material. The candidate will be able to multitask, work quickly and efficiently, and possess the ability to change priorities and tasks as needed. Responsibilities will include carrying out laboratory extraction production, intake of raw material, tracking material quantities in CTS system, troubleshooting and resolving problems, maintaining logs and records, maintaining glassware, grinding and packing material, daily lab cleanup, and more. • Operates hydrocarbon extractor and creates various forms of cannabis extracts while meeting or exceeding production goals, • Consistently follows Standard Operating Procedures (SOP) and all safety guidelines, • Intakes and processes raw cannabis material into crude or concentrate., • General housekeeping in the extraction room, • Documents data by creating and maintaining accurate batch records., • Secondary cannabinoid processing: prepare cannabinoid concentrate for specific secondary refining processes., • Navigate Cannabis Tracking System (CTS) and execute common commands for a given project., • Keeps equipment operational by following operating instructions; troubleshooting breakdowns, and performing preventive maintenance., • Keeps laboratory inventory in stock by placing orders and verifying receipts., • Resolves problems by examining and evaluating data, selecting corrective steps., • Updates job knowledge by participating in educational opportunities; reading technical publications., • Enhances laboratory and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments., • Maintains glassware by picking-up, cleaning, washing, sterilizing, and organizing., • Experience operating hydrocarbon extractor, • Knowledge of Chemistry Techniques, Lab Environment, Solvent Extraction, Cryogenic Procedures, Record Keeping, Data Tracking, Safe Lab Practices, Equipment Calibration and Maintenance, Chemical Safety, • Has cannabis knowledge and knows chemical properties of cannabinoids., • Must have reliable transportation., • Must be 21 years of age and authorized to work in the US with proper employment documentation., • Must have or be willing to obtain a Facility Agent Card through AZDHS Job Type: Full-time Pay: Dependent upon experience Expected hours: 40.00 per week SCHEDULE: • Night Shift, • Monday to Friday, • 2pm - 10pm We are an equal opportunity employer and considers all qualified applicants equally without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Flexible schedule, • Base Salary: $40,000$60,000, • Uncapped Commissions + Performance Bonuses, • Total Compensation Potential: $60,000$300,000+, • Minimal Competition: Our fire prevention services are code-mandated and recurring, with huge demand and limited local providers, • High-Earning Potential: Uncapped commissions + bonuses = $60K$200K+ realistic earnings, • Direct Access to Leadership: Get mentorship, rapid feedback, and clear expectations, • Real-World Impact: Help reduce the risk of kitchen fires and improve safety across the city, • Work-Life Flexibility: Office-free structure, flexible hours, and work-from-home admin days, • Support & Training: Well teach you everything you need to know about kitchen exhaust systems, safety codes, and how to succeed in the industryWhat Youll Do, • Prospect and close B2B sales with restaurants, commercial kitchens, facilities, and hospitality operators, • Build a pipeline through cold calling, cold emailing, in-person visits, referrals, and follow-up, • Conduct rooftop and kitchen inspections to evaluate exhaust systems, fans, filters, and ductwork, • Document findings using CompanyCam and present proposals through PandaDoc, • Maintain accurate CRM data in ServiceMinder and manage follow-up timelines, • Proven B2B sales success in restaurants, commercial cleaning, HVAC, or facilities, • Comfortable with cold outreach, door-to-door visits, and following up with persistence, • Existing restaurant or facility service contacts in Phoenix a major advantageCommunication and Tech Proficiency, • Confident speaking to business owners, asking questions, and explaining services clearly, • Proficient using a laptop, smartphone, CRM (ServiceMinder), CompanyCam, PandaDoc, Google WorkspaceHands-On Work Ethic, • Not afraid to climb on a roof, check greasy filters, or inspect fan belts, • Comfortable working in heat, tight spaces, and commercial kitchens, • Handy with tools and basic mechanical inspections preferredOrganized and Reliable, • Self-disciplined and consistent with documentation, follow-up, and proposal accuracy, • Able to manage your own schedule and follow a structured sales processPhysical Requirements, • Must be able to lift 40+ pounds and climb ladders, • Comfortable working at heights and outdoors in variable weather conditionsPreferred Qualifications, • Experience with commercial kitchen services, restaurant operations, or facility maintenance, • Certifications in sales, compliance, or technical service fields

Job Description A Data Center Technician is the technical liaison between the technology teams, customer and the 24x7 Data Center Environment. As a data center technician, you will be responsible for providing on-site data center escalation support for mission-critical equipment. You can provision and troubleshoot a range of data center infrastructure components including, but not limited to hardware, fiber, networking, servers, NAS, and related equipment. You are efficient at collaborating and troubleshooting complex technical issues through Chat, Phone, and Email. You know how to innovate and make decisions on your own, but also know how to take direction when it is given, paying attention to all details involved. Expected to improve current processes and introduce automation with aim towards simplification. PRINCIPAL DUTIES AND RESPONSIBILITIES: Must be able to work long shifts including nights and weekends. Must have demonstrated expertise in enterprise hardware installation, troubleshooting and repair in two or more of these areas: • Directly support and complete all scheduled data center MACs (Moves/Adds/Changes) for all tickets, emails & chats., • Hardware installation, including device labeling, power connectivity and network cable connectivity., • Complete hardware support work orders involving hardware, cabling, troubleshooting and break-fix., • Provide smart-hands assistance as required for customers within specified SLA response times., • Maintain a safe and secure operating environment within the data center and report any violations to their immediate supervisor., • Detailed and thorough documentation and record keeping., • Strong working knowledge with server and network hardware/components., • Data center productivity and support tools, applications, and software including but not limited to (Windows, Linux, SSH, RDP, Putty, KVM, IPMI, Terminal, etc.), • Provide vendor and client escorts as needed., • Provide general cleaning on raised floor, cabinet/rack exterior surfaces, work benches and other areas as needed on a regular basis., • Provide status reporting regarding Data Center service availability, performance, capacity utilization as required. KNOWLEDGE, SKILLS AND ABILITIES: • Must be self-motivated, detail oriented, positive in approach, professional and help create, develop, and implement project process improvement(s)., • General knowledge of server/network equipment and software support configurations., • Basic understanding of data center power distribution and data center best practices., • Strong aptitude for independent working environment and high productivity rate., • Must possess proven problem-solving skills, critical thinking skills and the ability to see tasks through to completion., • Must be able to work from a ladder, in confined spaces, lift up to 50 pounds and move up to 75 pounds., • Ability to sit, stand, kneel or squat for long periods of time., • Is comfortable working in a fast-paced environment and multi-tasking, • Must be able to see and distinguish different colors, read small print, and hear and recognize audible signals such as server tones., • This is a THIRD SHIFT role. Typical hours will be from 10:00PM to 6:00AM. QUALIFICATIONS AND EDUCATION REQUIREMENTS: • Must possess at least a High School diploma or GED equivalency., • Two (2) years’ minimum of data center experience., • Excellent communication and customer relationship skills., • Any server, OS, Network, or data center certifications are a plus., • Must be proficient with Microsoft Word & Excel.Company DescriptionPhoenixNAP is a privately held organization of operational, networking and management professionals that have worked in the datacenter and IT fields since the early 1990s. The company employs a unique approach to providing flexible data center solutions that are tailored to meet the differing needs of small businesses and large enterprises Phoenix is an ideal location for a data center because it is in an area not prone to natural disasters, there is a relatively low cost for power, and the city and region are very supportive of the high-tech industry. However, though Phoenix is home to numerous single tenant data centers, a lack of multi-tenant facilities in the area with available space and power presented a market need. PhoenixNAP is meeting that need while simultaneously addressing another market concern by establishing a true network access point for the city, state, and Southwestern United States region. PhoenixNAP operates a not-for-profit public peering exchange, enabling carriers to peer with one another to limit backhauling traffic to other cities across the country, and offer data center clients' additional connectivity options. Through a unique approach to designs that maximize efficiencies, PhoenixNAP is able to keep operational costs in check and pass additional captured savings on to its clients. PhoenixNAP has the available space, necessary power, efficient cooling, versatile connectivity, and multi-faceted security of a next generation data center. To learn more click here: is a privately held organization of operational, networking and management professionals that have worked in the datacenter and IT fields since the early 1990s. The company employs a unique approach to providing flexible data center solutions that are tailored to meet the differing needs of small businesses and large enterprises\r\n\r\nPhoenix is an ideal location for a data center because it is in an area not prone to natural disasters, there is a relatively low cost for power, and the city and region are very supportive of the high-tech industry. However, though Phoenix is home to numerous single tenant data centers, a lack of multi-tenant facilities in the area with available space and power presented a market need. PhoenixNAP is meeting that need while simultaneously addressing another market concern by establishing a true network access point for the city, state, and Southwestern United States region. PhoenixNAP operates a not-for-profit public peering exchange, enabling carriers to peer with one another to limit backhauling traffic to other cities across the country, and offer data center clients' additional connectivity options. \r\n\r\nThrough a unique approach to designs that maximize efficiencies, PhoenixNAP is able to keep operational costs in check and pass additional captured savings on to its clients. PhoenixNAP has the available space, necessary power, efficient cooling, versatile connectivity, and multi-faceted security of a next generation data center.\r\n\r\nTo learn more click here:

Job DescriptionAt WorkWave, we build innovative software solutions with AI capabilities for the people who keep our world safe, clean, and beautiful, from pest control to lawn care, commercial cleaning to security services. With over 8,000 customers around the globe, our platform helps these hardworking service professionals run and grow their businesses from end to end: from customer acquisition to scheduling, billing, payments, and beyond. Our vision is simple but powerful: empower the world’s mobile service workers to build a brighter future. And we back that up with decades of experience, a passionate team, and an unwavering commitment to helping our customers thrive. WorkWave is looking for a Solutions Engineer to play a key role in driving sales by supporting our Account Executives and Account Managers with the technical positioning of our Wavelytics software solutions. As a trusted advisor to prospects and customers, you’ll ensure they fully grasp the value and functionality of our solutions. Your expertise will be instrumental in closing deals and fostering long-term customer relationships. Why Join Now: We’re at an exciting moment in our growth journey. With the launch of Wavelytics, our new AI-powered analytics suite, we’re unlocking new ways to deliver value to our customers and new opportunities for our team. WorkWave operates in a field service management market that’s accelerating due to global trends in automation, sustainability, and digital transformation. Joining now means getting in early as we scale to meet massive demand and lead the future of service software.WHAT YOU'LL DO: • Develop and maintain strong relationships with prospects and key customer accounts to support deal closure., • Serve as the Wavelytics Product & Sales expert, supporting Account Managers by skillfully addressing technical and product-related questions throughout the sales cycle., • Understand and articulate our competitive advantages of Wavelytics and AI, effectively differentiating our solutions to buyers., • Speak to data protection and AI best practices and security considerations., • Collaborate with product, engineering and sales teams to refine messaging around new features and maximize their impact in the market., • Develop and maintain sales playbooks to align with product enhancements., • Cultivate customer relationships to drive testimonials and case studies that highlight product success., • At times this SE will be required to lead a sales pursuit as well at times be required to support sales pursuitsWHAT YOU'LL BRING:, • 3+ years of experience supporting the sales organization with data analytics and AI offerings., • Strong ability to learn and articulate complex technology in a way that resonates with customers., • Proven ability to quickly build rapport, understand business needs, and effectively communicate solutions.

Job DescriptionAt WorkWave, we build innovative software and fintech solutions for the people who keep our world safe, clean, and beautiful, from pest control to lawn care, commercial cleaning to security services. With over 8,000 customers around the globe, our platform helps these hardworking service professionals run and grow their businesses from end to end: from customer acquisition to scheduling, billing, payments, and beyond. Our vision is simple but powerful: empower the world’s mobile service workers to build a brighter future. And we back that up with decades of experience, a passionate team, and an unwavering commitment to helping our customers thrive. WorkWave is seeking a results-driven Enterprise Account Executive who excels at complex qualification, leads strong discovery calls, can solution sell, thrives in competitive environments, and can manage relationships on big ticket contracts throughout long sales cycles. Why Join Now:We’re at an exciting moment in our growth journey. With the launch of Wavelytics, our new AI-powered analytics suite, and continued momentum in integrated payments, we’re unlocking new ways to deliver value to our customers and new opportunities for our team. WorkWave operates in a field service management market that’s accelerating due to global trends in automation, sustainability, and digital transformation. Joining now means getting in early as we scale to meet massive demand and lead the future of service software.WHAT YOU'LL DO: • Act as a strategic partner to the world’s largest field service businesses, architecting high-impact solution roadmaps that align with WorkWave’s powerful end-to-end platform, including core functionalities like CRM, ERP, integrated payments, and our new AI-powered analytics suite, Wavelytics., • Lead visionary conversations with executive stakeholders, guiding them toward a future state that supports sustainable growth, operational excellence, and digital transformation., • Consult with purpose and precision: manage complex, multi-stakeholder sales cycles with professionalism and energy, keeping enterprise prospects engaged and focused on measurable business outcomes., • Demonstrate thought leadership and technical fluency, with the ability to articulate value across our solutions suite and professional services offerings., • Champion strategic prospecting efforts to identify, engage, and convert top enterprise targets into long-term WorkWave customers., • Work with Sales Engineers to deliver compelling product demos and tailored solution recommendations that position WorkWave as the clear vertical market leader for field service management., • Own your outcomes: build, manage, and close a robust pipeline of multi-million-dollar SaaS opportunities, consistently meeting or exceeding company goals., • Be a visible force within WorkWave, collaborating with cross-functional leaders and maintaining high visibility with executive stakeholders across the company., • Leverage cutting-edge technology and sales tools to efficiently manage your pipeline, craft tailored proposals, and drive deal progression.WHAT YOU'LL BRING:, • Customer-Centric Mindset: A deep appreciation for the hardworking service professionals we serve—those who keep our world safe, clean, and beautiful—and a drive to help them grow their businesses through innovative technology., • Strategic Influence: Ability to lead high-stakes conversations with C-level decision-makers, earning trust and guiding organizations toward transformative outcomes., • Disciplined Execution: Highly organized, detail-oriented, and committed to consistent follow-through across long sales cycles and multi-stakeholder deals., • Strong Business Acumen: A clear understanding of business models, financial drivers, and how to align software solutions to a company’s strategic objectives., • Relationship-Builder: Skilled at developing long-term partnerships based on credibility, trust, and shared success—internally and externally., • Accountability & Ownership: Takes full responsibility for driving deals forward, managing resources, and delivering measurable impact., • Composed Under Pressure: Maintains a calm, confident demeanor in high-stakes situations; resilient in the face of challenges and focused on outcomes.

Job Description CNC Machinist Aerospace & Defense Manufacturing Location: 3617 E La Salle St, Phoenix, AZ 85040 (40th St and Southern) Shift: Day shift or Night shift REQUIRED: Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. RESPONSIBILITIES: • Operate CNC machines without oversight running proven production jobs, • Understand process trouble shooting techniques with the ability to display those attributes, • Demonstrate proper setup techniques, loading, indicating, touch off, of all tooling. Ability to load programs and verify correct operation, revision, etc. Cutting jaws and loading of needed fixtures. First piece buy-off, • Daily machine maintenance (checking fluid levels, cleaning out chips, etc.), • Maintaining a clean and organized work space, • Clear understanding of CNC controls including G & M program codes, • Tool management, entering in offsets without oversight to compensate for tool wear etc. Replacement of worn and damaged tools (inserts, boring bars, end mills, drills, etc.), • Ability to read and have a clear understanding of B/P’s including assemblies, dimensions, tolerances, symbols, notes, abbreviations, GD&T (geometric dimensioning and tolerancing), and any other standard nomenclature per customer, government, or industry standards, • Proper use of basic inspection, measuring and test equipment to verify machined dimensions of product. Working knowledge of the use of dial bore gages, air gages, intertest gages, etc., • In-process inspection of parts machined. Recording inspection data at the prescribed intervals per the inspection traveler or other company paperwork, • Filling out MOT and job routers, • Maintaining correct part counts on the MOT for the operations performed, • Tagging hardware and recording discrepancies on proper paperwork for hardware known to be discrepant. ALL issues are to be addressed with lead personnel upon discovery, • Communicate any job related issues/questions (part feature, program, inspection, etc.) to lead personnel for resolution and or clarification, • Reporting all machine collisions and malfunctions to lead personnel, • Ability to use computer software, company ERP system, clocking in and out of jobs, etc., • 2 – 5 years of experience running CNC lathes, • Clear understand G & M codes for Fanuc based programming, • Good understanding of GD&T and industry standards of inspection The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: • The Civil Rights Act of 1964 as Amended, • Age Discrimination Act of 1967 as Amended, • Rehabilitation Act of 1973, • Vietnam Era Veterans Readjustment Act of 1974, • Americans with Disabilities Act Amendment Act of 2009 (ADAAA), • The Wagner-Peyser Act as Amended., • The Workforce Innovation and Opportunity Act, • Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description CNC Machinist CNC Mill or CNC Lathe Aerospace & Defense Manufacturing Location: 2688 E Rose Garden Ln, Phoenix, AZ 85050 (North Phoenix) Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. Shift: Night Shift • CNC Lathes, • CNC Mills, • Grind, • Review/study MOT’s, blueprints, and sketches to determine operations to be performed on part, • Determines fixtures, cutting tools, attachments, programs, and gages needed, • Aligns and secures holding fixture, installs cutting tools in proper holders and puts holder in machine and sets tools offsets, • Ensure the inspection department work flow is supporting production needs, • Loads programs corresponding to the operation into computer, checks tools and programs are in correct order of operation and edits program, if necessary, • Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls as required, • Sets up and maintains proper inspection method for all machined parts and communicates with coworkers where necessary for smooth transition of work shifts, • Performs in-process inspections, • Completes all paperwork including MOTs, DMRs, Non-Conforming Material requests, and First Article Inspection Forms in accordance to our procedures and policies, • Identifies and records non-conforming parts as discrepant, • Verifies quantity, customer part number and revision to the MOT and Blueprints, • Basic use of CNC control, operation, and maintenance requirements, • Read and understand B/P's, including assemblies, dimensions, tolerances, symbols, notes, abbreviations, geometric dimensions, tolerance, and other standard nomenclature per customer, government, or industry standards, • Loads material/parts into machine and programs, • Daily maintenance on machine (checking fluid levels, cleaning out chips), • In process inspection of parts, • Enter tool offsets to compensate for tool wear, • Replacement of worn or damaged tools (inserts, boring bars, end mills drills, etc.), • Filling out the MOT and their Job Sheets properly, • Maintaining correct count of parts on the MOT for their operations, • Tagging hardware and recording discrepancies on proper paperwork for hardware known to the operator to be discrepant, • Recording inspection data at proper intervals per the Inspection Traveler or other company paperwork, • Communicate any job-related issues / questions (part feature, program, inspection, etc.) to lead person for resolution / clarification, • Maintain a clean and organized workspace, • Report all machine malfunctions to the lead, • Physical Demands: Must be able to stand for the majority of the work shift, reach overhead, and bend to the floor. – exert 20 to 50 pounds of force occasionally, andor exert 10 to 25 pounds of force frequently, andor – exert up to 10 pounds of force constantly to move objects, • Visual Acuity: Ability to detect surface defects, tool wear, or measurement deviations - good near vision for reading drawings, measurements, and digital readouts, and computer screens The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: • The Civil Rights Act of 1964 as Amended, • Age Discrimination Act of 1967 as Amended, • Rehabilitation Act of 1973, • Vietnam Era Veterans Readjustment Act of 1974, • Americans with Disabilities Act Amendment Act of 2009 (ADAAA), • The Wagner-Peyser Act as Amended., • The Workforce Innovation and Opportunity Act, • Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Head Mechanic, you will service and maintain our fleet of state-of-the-art, high performance, high speed electric go karts. Duties and Responsibilities • Perform opening track and kart repairs and performance checks, • Maintain kart performance throughout the day, • Maintain track and facility appearance and functionality, • Keep accurate documentation of repairs, parts inventory, and special projects, • Responsibly maintain supply of tools and machinery, • Respond to emergency situations as they arise, • Ensure that the pit, kart shop and track areas remain clean and safe, • Assist the track crew with track operations in limited situations, • Perform specific facility cleaning and maintenance duties as assigned by management, • Perform closing duties to secure the pit and track and prepare for the following day's operation, • Must be at least 18 years of age, • High school diploma or general education degree (GED); or 1 to 3 months related experience and/or training; or equivalent combination of education and experience., • Provide proof of identity and eligibility to work in the United States, • Weekends are a must!

Job DescriptionDescription: Canine Coach Job Posting Bring your dog to work? That's right! Dogtopia, the industry leader in dog daycare, boarding, and spa services has an immediate opening for an energetic, organized, business-minded individual that will be the first point of contact for our furry friends as a Canine Coach. Tis person should love dogs - and, upon successful completion of training, you can even bring YOUR dog to with with you! What a bonus! Core Competencies • Consistent and timely attendance, • Ability to learn dog recognition, • Completion of all E-learning platforms, • Meal recording, • Proper door control in all rooms, • Ability to help in Grooming task, • Must love dogs, • Ability to spend up to 100% of work time standing, • Ability to work flexible days and hours, including holidays and weekends, • Ability to work cohesively with others in a fun, fast paced environment, • Strong customer service skills, • Detail oriented, • Quick thinker, • Emotionally intelligent, • Outgoing, enthusiastic by nature, • Fun-loving, • Strong observation skills, • Strong Multitasker, • Maintain control of large groups of dogs, • All rooms are equipped with cameras for Pet Parents to stay engaged, • Caring for all furry friends as if they were a part of your family, • Keep data accurate with current dogs, • Engage, Play and Enjoy the furry friends! We LOVE life unconditionally like a dog. We STAY loyal to our pack We CHASE the absolute highest standards of safety We PLAY to our fullest potential We TREAT every day like It's the Most Exciting Day Ever! Health and Grooming • Efficient in all grooming task, • Will learn how to identify dog breeds and behaviors, • Report dog scuffles right when they occur for safe wound cleaning if needed, • Maintain and update cleaning schedule, along with holding themselves and team accountable to the Dogtopia's safety and cleaning standards., • Inventory management of cleaning, dog and 1st aid supplies., • Maintains a neat and organized Front Desk team and area at all times., • Sets the example for the team on the 3 S's (smile, story and satisfaction) and hold accountable to internal and external customer service standards., • Answering Phones, emails and questions from Pet Parents, • Strive for high customer review ratings! This job description serves as a general idea of the essential functions of a Canine Coach will be and should not be considered exhaustive list of duties and responsibilities. At the discretion of Dogtopia, additional duties may be assigned as needed. Dogtopia is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type Requirements:

Job Description National Calibration Inc. was established in 1955, and is a growing full service ISO 17025 Accredited Calibration Laboratory with multiple offices located throughout the Southwestern United States. Our accredited laboratory provides calibration and repair of test and measurement equipment to include: Electronics, Force, Linear, Torque, Pressure, and Weight. We are a family owned business based in Scottsdale, AZ that has 35 employees with openings in Scottsdale, AZ. DESCRIPTION: We are looking for several motivated people to fill our openings as calibration technicians in a very fast paced and quality first environment. We have openings on first shift, Phys/D, Electronics, Force, Torque, and Onsite Calibration areas. These positions are customer focused and team oriented to provide 1st class customer service in calibration. GENERAL RESPONSIBILITIES: Maintain, repair, and calibrate physical/dimensional and laboratory standards with experience in all technical areas. Operate under close supervision and achieve technical guidance, as required, from supervisor or higher level technician. Learn and competently perform pressure calibrations, electrical calibrations, and temperature calibrations using developed procedures and practices Capture test readings using common instruments such as micrometers and calipers. Knowledge of torque and force application and principles. Knowledge of pressure principles, understanding of units of measure will train into field for right candidate. Learn and perform necessary repairs of instrumentation Customer interaction Cleaning and maintenance of lab equipment and lab Perform other duties as requested by the calibration lab manager or lead with training Effectively communicate with other employees in all departments PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Frequently required to stand, walk, and reach with hands and arms Frequently lift or move heavy instruments, up to 50 pounds, short distances Able to maintain concentration & focus while performing calibration JOB RESPONSIBILITIES: Maintain, repair, and calibrate physical/dimensional and basic electronics test measurement and diagnostic equipment (TMDE) and laboratory standards with experience in all technical areas. Knowledge of pressure principles, understanding of units of measure, and application of pressure for direct readout. Knowledge of torque and force application and principles. Capture test readings using common instruments such as micrometers and calipers. Ability to use and operate electronic calibration standards and automated calibration procedure software. Ability to review standards and specifications to develop calibration templates, procedures, and set guidelines for approval through QA. Provide Customer Service at a high level and maintain professionalism at all times while relaying information to Clients and Management. Operate under close supervision and achieve technical guidance, as required, from supervisor or higher level technician. SKILLS, KNOWLEDGE, ABILITIES: Must have math skills equal to Algebra I Microsoft Office Suite Knowledge Excel Skill a bonus Mechanical and electrical aptitude/experience preferred Clean Driving record for 3 years High School Diploma or equivalent Excellent communication skills, verbal and written Good organizational skills. Mid-Level Technicians (2-7 years of experience) PMEL or other formal calibration training preferred Ability to use basic math to solve problems and analyze data Capable of interpreting technical documents and instructions Good organizational skills, with the ability to establish priorities. Must have a solid understanding of electronics, electromechanical, mechanical, and thermal principles as they apply to metrology practices. Experience with maintenance data collections systems, supply, transportation, and electronic mail is required. Microsoft Office Suite Knowledge with higher level Excel Skills Excellent communication skills, verbal and written Ability to train newer technicians Work Locations: Scottsdale, AZ Pay Frequency: Bi-weekly A job for which military experienced candidates are encouraged to apply NO AGENCIES PLEASE! EOE

Job Description Time expectation 7:45-4:00 Monday-Friday Essential Responsibilities for Teachers: • Help cultivate and maintain a culture of respect, dignity, and professionalism, • Plan, implement, and monitor the efficacy of the classroom curriculum, • Deliver expected curriculum instruction with fidelity, • Actively monitor students following the staff duty schedule, • Create and implement individual education programs for students assigned to homeroom caseloads, and follow such plans for any student attending core instruction under your guidance., • Collect, analyze, and report on individual student data, • Keep up-to-date attendance/illness/accident records of children in the class, • Plan, implement, and post a weekly written plan of daily class activities, • Set up and maintain an appropriate classroom environment (this includes ensuring a clean, safe, and organized classroom), • Provide quarterly written assessments to administration/families on children’s progress, • Provide written guidelines for substitutes within the expected due dates each quarter for the emergency subfolder, • Give guidance, training, and direction to teacher assistants and volunteers, • Help with school-wide presentation and cleanliness (bulletin boards, daily cleaning, organization of materials), • Attend monthly staff meetings, • Attend community-building events no less than three per year, • Participate in all staff development offered on campus and off as required for essential competencies that ensure a safe environment (CPR/FA, Safety Care, Stop the Bleed, etc.), • Maintain a fingerprint clearance card.Company DescriptionPathways School Tucson is a state-approved private day school expanding in the Tucson area.Pathways School Tucson is a state-approved private day school expanding in the Tucson area.

Job DescriptionSalary: Hiring Range (Monthly Pay): $5,757 - $6,583 Job Code: ENGSLMGR Reports To: Director, Business Development Operations Base Location: AZ Work Status: Virtual Office Minimum Starting Monthly Range: $5,757 Hiring Range (Monthly Pay): $5,757 - $6,583 Full-time / Part-time: Full-time Exempt / Non-Exempt: Exempt Risk Designation: Medium Summary: The Engagement Solutions Manager (ESM) collaborates with Contexture internal teams to support sales execution and operations. The ESM partners with the Engagement Team to lead prospects from inquiry to becoming a satisfied client. Is responsible for the retention of existing participants, ongoing relationship management, and continued promotion of Contextures products and services. They work closely with all departments to ensure a seamless and high-quality customer experience. As the Engagement Team identifies new prospects, the ESM will create new opportunities, secure customer agreements, and represent customer needs through the implementation process of those new opportunities. Additionally, the ESM is responsible for keeping Participant information accurate by validating specific data points such as contact names during routine engagements. The ESM is also responsible for maintaining frequent contact with high-priority participants and responding timely and effectively to identified needs and requests. This position is based in Phoenix, Arizona. Our strategic flexibility allows for local work from home opportunities. Essential Duties and Responsibilities include the following: • Work with the Marketing and Engagement teams to plan and implement campaigns to meet Contexture sales goals and objectives, • Qualify leads and promptly and effectively transition leads to the Engagement Managers, • Develop client relationships and work with the team to become a long-term trusted health information exchange partner, • Responsible for managing attestation and the patient rights processes, forms, verification, etc., • Utilize business application reports to support sales operations, identify new revenue opportunities and provide information for other Contexture teams, • Explain use cases for current Contexture products to a wide variety of Contexture participant types, • Create presentations and collaborate with marketing/communications to define messaging and materials, • Builds and maintains strong, long-lasting relationships with influencers inside the Participant organization, • Demonstrate HIE application in small group and large group settings, on-line and in person, • A working knowledge of the technical components of all HIE solutions and services, • Is able to provide a first-line solution and/or triage technical concerns for participants, before passing to appropriate Contexture teams, • Responsible for initiating onboarding activities, fulfilling necessary requirements for solution implementation, and collaborating with the relevant Contexture teams to ensure participants go-live with HIE services., • Assists with high-severity requests or issue escalations as needed, • Assists in the development of materials targeted at clinical and support staff for each Contexture product and service, • Informs Contextures development of new products and services, • Maintains high-touch engagement with priority Participants including but not limited to agenda development, meeting cadence/schedule, key player/contact tracking, custom survey, etc., • Prepares reports on account status, • Identifies up-sell opportunities with current Participants and provide information to team for engagement and closure, • Responsible for maintaining current and accurate account information in Contextures business applications and keeps other applicable teams abreast of updates and changes, • Responsible for generating and managing reports on data submitted/exchanged on behalf of participants, • Responsible for ensuring participant awareness of financial account status., • Performs other related duties as assigned Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Skills • Working knowledge of clinical practice processes within various care settings, • Ability to excel in an entrepreneurial, fast-paced, diverse, results-oriented culture, • Comfortable with changing priorities and evolving processes, • Works in collaboration with other Contexture team members to ensure alignment across Contexture, • Intellectually curious; interested in market dynamics impacting interest in Contexture products and services, • Adaptable, flexible, creative business thinking attributes are critical, • Excellent verbal, written, and interpersonal communication skills; persuasive communicator, • High energy, positive, competitive, can-do attitude, and attention to detail, • Strong initiative with solid work ethic and a willingness to roll up sleeves and do what it takes, • Use creative clinical, business, and operational solutions, • At ease with ambiguity, demonstrated ability to make sound decisions with limited information, • Assertive, results- and success-oriented self-starter, with excellent project management skills, • Proactively resolve problems and take decisive action, giving regard to impact on all stakeholders, • Highly developed multi-tasking skills, • Team player with all Contexture staff and community, • Strong sense of personal responsibility in achieving Contextures goals, • Excellent communication, influencing and partnering skills at all organizational levels, • Demonstrated critical analysis and strategic planning capabilities, • Understanding of clinical workflows, • Experience with EHR software systems, • Expertise in Excel for reporting and cleaning up prospect lists for Sales campaigns, • Experience with Customer Relationship Management software., • Experience with Business Intelligence software, preferably Tableau, • Understanding of the HIE landscape, including functionality, technology (HIT) and policy, • Commitment to Contexture mission and strategic direction, • Passion for improving healthcare, • Valid drivers license, • Ability to travel within Arizona and/or Colorado to visit participant locations and occasionally stay overnight at conference location Education/Experience Minimum of 2+ years of sales or account management with physician practices. A Bachelor's Degree in Business, Healthcare Management, Information Systems, or a related discipline. Experience in preferably in healthcare IT or with a clinical background degree preferred. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate. The position may require occasional availability for after-hours work, outside of regularly scheduled hours. The position may require ability to periodically drive to and from clients, conferences and / or events; and / or limited travel. This position is expected to be exposed to, process, or handle sensitive information including but not limited to Protected Health Information (PHI), Personally Identifiable Information (PII), financial information, etc. As such, the holder of this position is expected to comply with all applicable laws, regulations, organizational policies, and compliance expectations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The person in this position needs to frequently communicate and exchange information and move about inside the office to access file cabinets, office machinery, etc. Must be able to remain in a stationary position 50% of the time. Constantly operates a computer and other office productivity machinery, such as a keyboard, monitor, calculator, copy / scanner machine, and printer. Frequently moves office and work-related material weighing up to 10 pounds; Occasionally moves office and work-related material weighing up to 30 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Note: This job description is not intended to be an exhaustive list of all duties, responsibilities and / or qualifications associated with the job. Benefits: Contexture provides a comprehensive benefits package. For details, please request a Benefit Summary from our Benefits Department. The organization is an inclusive Equal Opportunity Employer. We do not discriminate on the basis of age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other status protected by law or regulation.

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Expeditor Technician III to join us in Phoenix, AZ! This role combines the critical coordination and workflow management responsibilities of an Expeditor with the hands-on technical expertise of a Technician. The ideal candidate will be highly organized, detail-oriented, and thrive in a fast-paced production environment. They will ensure the timely delivery of parts, perform essential cleaning and processing tasks, and collaborate with our team to move parts through the process, including locating parts, assembling kits, and loading parts. Essential Duties and Responsibilities • Coordinate and expedite the flow of products, jobs, and assemblies between departments to meet production schedules., • Work closely with project managers, planners, and shop employees to maintain a constant flow of work orders., • Monitor and report delays or issues affecting production flow, including equipment, tooling, and resource constraints., • Compile and review production schedules, reports, and job statuses across various stages of work-in-progress (WIP)., • Communicate effectively with internal stakeholders and customers using verbal, written, and visual tools (e.g., drawings)., • Organize and integrate production delivery schedules, ensuring alignment with customer specifications and expectations., • Process parts using chemical and manual cleaning methods to eliminate micro-contamination., • Perform tasks such as receiving, masking, scrubbing, chemical processing, blasting, coating, drying, and packaging., • Follow Standard Operating Procedures (SOPs), Lean manufacturing principles, and safety protocols., • Handle hazardous chemicals safely and maintain proper disposal practices., • Maintain cleanliness and organization of assigned process areas., • Take SPC measurements and log data accurately., • Participate in safety meetings and ongoing training programs., • Learn and apply various tank chemistries and chemical recipes. Knowledge, Skills, and Abilities • Strong verbal and written communication skills., • Independent thought, good judgment, problem-solving skills, and the ability to prioritize multiple projects., • Strong organizational skills and time management abilities., • A team player with solid interpersonal skills., • Self-motivated with little or no supervision., • Strong computer skills (Will use Excel / Microsoft Teams)., • Ability to interpret technical drawings and customer specifications., • Comfortable working in both cleanroom and manufacturing environments. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Experience Requirement 3+ yrs of experience in a production /manufacturing/warehouse setting. Intermediate knowledge of Excel and familiarity with Microsoft Teams preferred Educational/Certification Requirement: High School Diploma and/or equivalent experience. AA or Technical School preferred. Physical Demands and Working Conditions The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed primarily in a production and cleanroom environment. Physical Demands • Ability to climb and stoop., • Ability to stand for sustained periods of time., • Ability to move arms, hands, and fingers., • Ability to li up to 40 lbs. consistently., • Ability to li over 40 lbs. with assistance., • Have the visual acuity to perform the given task., • Ability to sit for sustained periods of time., • Ability to talk on the phone and use a computer for extended periods of me., • Work with hazardous chemicals daily. Environmental Exposure • Subject to frequent interruptions., • Required to wear personal protective equipment where applicable., • Subject to hazards including electrical current, moving mechanical parts, and exposure to chemicals., • Subject to various noise levels from manufacturing and office equipment. Overnight Travel Work may require out-of-town travel depending upon assignment (training and meeting). UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off At Ultra Clean Technology, we don’t just welcome diversity - we celebrate it! Ultra Clean Technology is proud to be an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations

Job DescriptionDescription: Soleo Health is seeking a Full-time Pharmacy Technician to support our Specialty Infusion Pharmacy in Tempe, AZ. Join us in Simplifying Complex Care! Soleo Health Perks: • Competitive Wages, • 401(k) with a Match, • Referral Bonus, • Paid Time Off, • Great Company Culture, • Annual Merit Based Increases, • No Weekends or Holidays, • Paid Parental Leave Options, • Affordable Medical, Dental, & Vision Insurance Plans, • Company Paid Disability & Basic Life Insurance, • HSA & FSA (including dependent care) Options, • Education Assistance Program The Position: The pharmacy technician provides clinical support services and sterile compounding of infusion therapies under the direction of a pharmacist, and in compliance with state board of pharmacy's sterile compounding and pharmacy practice regulations. The pharmacy technician prepares and provides clinical support services necessary for the dispensing of injectable and oral medications used to support our core business offerings. Responsibilities include: • Sterile preparation of IV / infused medications under the direction of the pharmacist and in compliance with current regulations and standards., • Demonstrates understanding of USP 797 standards, USP 800 standards, and current State Board of Pharmacy (BOP) regulations., • Maintains call and shipment schedules to ensure continuity of care for all patients., • Collects, documents, disseminates and coordinates customer communications, laboratory data and various clinical information with pharmacy, nursing and reimbursement staff., • Performs efficient data entry of pertinent patient and prescription information into company’s pharmacy software system, as allowed by BOP regulations., • Performs all cleaning and maintenance of the pharmacy clean room in accordance with company policy and state BOP regulations., • Participates in company’s quality assurance and performance improvement program., • Remains current with the BOP continuing education requirements, and completes Soleo’s annual re-credentialing process., • Performs receiving and storage of medications and supplies from vendors., • Performs the picking/packaging of supplies and medications for shipment to the customer home., • Participates in regularly scheduled inventory counts and complies with Soleo’s formulary management program., • Must be able to work Full time, Monday-Friday 9am-5:30pm, 40 hours per week (holidays and weekends as needed), • Must have experience with IV compounding (Specialty Infusion or hospital experience required), • Must be licensed as a Pharmacy Technician in the state of Arizona, • Must be PTCB- Nationally CertifiedRequirements:, • High school diploma (or equivalent) required, • Registered/Certified Pharmacy Technician (CPhT), or as required by the BOP, • Minimum experience working as a technician in the pharmacy IV room of a hospital., • Prior technician experience with a home infusion company preferred, • Current registration and ACPE requirements are met, • Excellent customer service skills, • Excellent sterile compounding technique, • Basic to intermediate efficiency with Microsoft Excel, Word and Outlook About Us: Soleo Health is an innovative national provider of complex specialty pharmacy and infusion services, administered in the home or at alternate sites of care. Our goal is to attract and retain the best and brightest as our employees are our greatest asset. Experience the Soleo Health Difference! Soleo’s Core Values: • Improve patients’ lives every day, • Be passionate in everything you do, • Encourage unlimited ideas and creative thinking, • Make decisions as if you own the company, • Do the right thing, • Have fun! Soleo Health is committed to diversity, equity, and inclusion. We recognize that establishing and maintaining a diverse, equitable, and inclusive workplace is the foundation of business success and innovation. We are dedicated to hiring diverse talent and to ensuring that everyone is treated with respect and provided an equal opportunity to thrive. Our commitment to these values is evidenced by our diverse executive team, policies, and workplace culture. Soleo Health is an Equal Opportunity Employer, celebrating diversity and committed to creating an inclusive environment for all employees. Soleo Health does not discriminate in employment on the basis of race, color, religion, sex, pregnancy, gender identity, national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an organization, parental status, military service or other non-merit factor. Keywords: Hiring now, now hiring, hiring immediately, immediately hiring, IV Compounding Pharmacy Technician, IV Compounding, Sterile Compounding, Aseptic Technique, Cleanroom/ISO Class 5 hood, IV Hood, Laminar airflow workbench, USP 797 compliance, USP 800 compliance, Parenteral admixture preparation, TPN, Chemotherapy admixture, Specialty Infusion Therapies, Hospital inpatient pharmacy, compounding pharmacy technician, IV admixture technician, pharmacy cleanroom operations, Hospital IV Compounding, Pharmacy Technician, Certified Pharmacy Technician, PTCB Certification, Pyxis, Omnicell, CPR+, Alayacare

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Technician Lead to join us in Phoenix, AZ! The Production Lead Technician works in our Advanced Technology Cleaning Centers (ATCC)® to process and clean (eliminating micro-contamination) our customers’ new and in process tool chamber parts. These manufacturing processes may use various machines, processes, and chemicals to meet the varying needs of chemistry, material composition, and coatings of different parts components. Processes may take place in a cleanroom or chemical processing environment. He/she may receive, package, bag, inspect, and ship parts. Safety is our number one priority. Personal Protective Equipment (PPE) is required to avoid exposure and protect the individual. The Production Lead Technician follows Standard Operating Procedures (SOPs) and Quality processes and assists the Production Supervisor to ensure all employees are following the safety protocols. • Must be able to work overtime as required., • The Team Leader is responsible for assisting Production Supervisor regarding safety, quality, and overall production of our customers product., • Follows all safety rules and policies and assists Production Supervisor on ensuring employees are following proper safety and regulatory policies., • Leads and assists in directing production workflow through each department., • Monitors job and ensures quality and production standards are met., • Develops and assists with training of employees within each department as needed., • Looks for and makes suggestions to improve safety, quality, efficiency, and organization of work and methods., • Assists Production Supervisor to monitors KPI’s and goals and assists in developing action plans of improvement., • Demonstrates the ability to work within the team environment by participating in the resolution of problems, participation in team meetings, enables associates to work together toward area goals., • Participates in the daily activities of the team such as safety, housekeeping, and other tasks as needed., • Documents all safety, quality, personnel, and equipment issues, and informs the Production Supervisor, • Ability to take SPC measurements and log data., • 3+ years of hands-on experience in manufacturing processes or materials, or equivalent relevant experience is preferred., • Experience in parts cleaning and coating technologies is desired., • Kaizen or Lean training a major plus., • Quality Assurance experience., • Previous experience in the Parts cleaning industry a major plus., • High school diploma or GED. Technical associate degree or some college preferred., • Manufacturing team leader or supervisory experience preferred., • Ability to handle repetitive work and provide fast turn-around on production related to masking, wiping, processing parts., • Good verbal and written communications., • Must be computer literate, in particular Microsoft Word and Excel., • Ability to work a flexible work schedule including some weekend and evening work., • Must be able to wear work area gowning and other required PPE. Work Experience: • 2+ years’ experience in a manufacturing environment; leadership experience preferred. Criteria: Work Environment: • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Ability to stand for extended periods, kneel, reach, walk, push, pull and grasp., • Exerting up to 35 pounds of force occasionally, and/or up to 35 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects., • Ability to move arms, hands, and fingers., • Ability to stand for sustained periods of time., • Required to wear personal protective equipment., • Prolonged standing with some sitting and bending intermittently during work hours., • Required to wear personal protective equipment where applicable., • Subject to frequent interruptions., • Subject to hazards including electrical current, moving mechanical parts, exposure to chemicals and debris. At Ultra Clean Technology, we do not just welcome diversity - we celebrate it! Ultra Clean Technology is proud to be an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations. UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Free uniforms, • Paid time off, • Base Salary: $40,000$60,000, • Uncapped Commissions + Performance Bonuses, • Total Compensation Potential: $60,000$300,000+, • Minimal Competition: Our fire prevention services are code-mandated and recurring, with huge demand and limited local providers, • High-Earning Potential: Uncapped commissions + bonuses = $60K$200K+ realistic earnings, • Direct Access to Leadership: Get mentorship, rapid feedback, and clear expectations, • Real-World Impact: Help reduce the risk of kitchen fires and improve safety across the city, • Work-Life Flexibility: Office-free structure, flexible hours, and work-from-home admin days, • Support & Training: Well teach you everything you need to know about kitchen exhaust systems, safety codes, and how to succeed in the industryWhat Youll Do, • Prospect and close B2B sales with restaurants, commercial kitchens, facilities, and hospitality operators, • Build a pipeline through cold calling, cold emailing, in-person visits, referrals, and follow-up, • Conduct rooftop and kitchen inspections to evaluate exhaust systems, fans, filters, and ductwork, • Document findings using CompanyCam and present proposals through PandaDoc, • Maintain accurate CRM data in ServiceMinder and manage follow-up timelines, • Proven B2B sales success in restaurants, commercial cleaning, HVAC, or facilities, • Comfortable with cold outreach, door-to-door visits, and following up with persistence, • Existing restaurant or facility service contacts in Phoenix a major advantageCommunication and Tech Proficiency, • Confident speaking to business owners, asking questions, and explaining services clearly, • Proficient using a laptop, smartphone, CRM (ServiceMinder), CompanyCam, PandaDoc, Google WorkspaceHands-On Work Ethic, • Not afraid to climb on a roof, check greasy filters, or inspect fan belts, • Comfortable working in heat, tight spaces, and commercial kitchens, • Handy with tools and basic mechanical inspections preferredOrganized and Reliable, • Self-disciplined and consistent with documentation, follow-up, and proposal accuracy, • Able to manage your own schedule and follow a structured sales processPhysical Requirements, • Must be able to lift 40+ pounds and climb ladders, • Comfortable working at heights and outdoors in variable weather conditionsPreferred Qualifications, • Experience with commercial kitchen services, restaurant operations, or facility maintenance, • Certifications in sales, compliance, or technical service fields

Job Description As an industry leader providing time and labor management solutions for over 25 years, Synel Americas () offers a small company culture within an international company. We work hard but enjoy a relaxed atmosphere and many employees have been with our organization for years. Our office is conveniently located in North Scottsdale. We are seeking a self-motivated, detail-oriented, and goal-driven individual to join our production/computer hardware department. We currently have both part-time and full-time positions available: * Part-Time: 4–5 hours/day, mornings, Monday through Friday * Full-Time: 8:00 AM – 4:00 PM, Monday through Friday Synel Americas offers competitive salaries and benefits, along with a supportive, small-company culture backed by an international organization. Primary Responsibilities Include: • Inspection and testing of hardware devices related attachments, • Filling orders, • Repair of hardware devices, • Shipping and receiving (boxes up to 50 POUNDS), • Inventory counts, • Cleaning of work area, • Inspection and performing QC on hardware devices, • Putting each new device through a multi-point check process (bench testing), • Shipping out product orders to customers, • Diagnosis and repair of hardware devices, • Receiving new hardware devices, • Cleaning maintaining work area Desired Skill Set: • Previous bench testing experience or exposure to bench testing, • Previous computer or electronic hardware repair/troubleshooting experience, • Someone with mechanical aptitude, • Someone who follows process protocols, • Someone ok with repetitive tasks, • Someone who is punctual, • Someone who is patient, • Someone who is detail oriented, • Someone with a technical aptitude, • Basic knowledge of how to use computers and average typing speed, • Ability to lift boxes up to 50 POUNDS Salary: $16 - $20/hour depending on experience Company DescriptionSynel is a world leader in the development and production of data collection systems and solutions for workforce management of time & attendance, including access control and job costing. SynelAmerica's portfolio of products provides complete hardware and software solutions, including advanced biometric data capture devices with fingerprint scanning technology, facial recognition and more. Solutions are available for complex, multi-location enterprises and single-building facilities of all sizes. SynelAmerica's solutions provide on-line and real-time data collection for immediate access to information throughout an organization. Harness the ability to improve efficiency and effectiveness, reduce costs, and provide an innovative user experience while maintaining compliance.Synel is a world leader in the development and production of data collection systems and solutions for workforce management of time & attendance, including access control and job costing. SynelAmerica's portfolio of products provides complete hardware and software solutions, including advanced biometric data capture devices with fingerprint scanning technology, facial recognition and more. Solutions are available for complex, multi-location enterprises and single-building facilities of all sizes.\r\n\r\nSynelAmerica's solutions provide on-line and real-time data collection for immediate access to information throughout an organization. Harness the ability to improve efficiency and effectiveness, reduce costs, and provide an innovative user experience while maintaining compliance.

Job Description Ready to Take Your Sales Career to the Next Level? Join a Company Where Your Impact Matters. At Verde, we know that the right person in the right role can change everything-and we're looking for that person to join us as our next Sales Person. If you're a high-performing sales pro who's tired of transactional work and wants to sell something that matters, this is your opportunity to be part of a mission-driven team doing meaningful work. Here's what you'll love about this role: • You'll have ownership. You'll be trusted to run your market and bring in the right opportunities, with support-not micromanagement., • You'll sell with purpose. Verde is redefining commercial facilities services through green cleaning, sustainability, and healthier workplaces. When you close a deal, you're creating real impact., • You'll be set up to win. We've got a clear growth plan, proven sales tools, and a leadership team that's fully behind you., • A strong track record in B2B sales and business development, • Confidence in managing a full sales cycle-from cold outreach to closing, • Mastery of CRM tools (we use HubSpot)-you know your pipeline, follow-ups, and data hygiene like the back of your hand, • A relationship-first approach and ability to spot real client needs Remote but you must live in Metro Phoenix or Southern California. You'll travel occasionally for client meetings and events (1–2 nights/month, occasionally more when needed). Compensation: Base + commission, with no cap. The more you grow our business, the more you grow your earnings. OTE: 200K+ Base: 75K If you're looking for more than just a sales job, if you're looking for a team, a mission, and a company that's actually fun to work with, let's talk. Apply now or tag someone who should. #SalesCareer #PurposeDrivenWork #BusinessSolutionsManager #VerdeVibes #NowHiring #SustainableBusiness Job Posted by ApplicantPro

Job DescriptionWith over 50 stores and the largest avocational cooking program in the US, Sur La Table offers an unsurpassed selection of exclusive and premium-quality goods for the kitchen and table – and the culinary expertise and inspiration to go along with it. Whether the job entails interacting with our customers, driving digital growth, or providing vital behind-the-scenes support, we’re all here for the same reason – to roll up our sleeves and create happiness through cooking and sharing good food. Position OverviewAs a Seasonal Chef Instructor, Pastry at Sur La Table, you are the in-store expert and advocate for all things baking and pastry arts. You deliver #bestincenter service, a company-wide standard for excellence in service, by sharing specialized knowledge in pastry techniques, baking fundamentals, and personalized instruction that supports all company initiatives. The Seasonal Chef Instructor, Pastry plays a key role in inspiring a love for baking while driving sales of bakeware, mixers, and decorating tools through hands-on pastry classes and engaging culinary instruction. Key ResponsibilitiesCustomer Experience & Brand Representation· Represent Sur La Table’s brand and culture by creating memorable, educational experiences that inspire repeat visits and customer loyalty. · Deliver an exceptional in-store culinary experience focused on pastry and baking classes that reflects Sur La Table’s passion for food, teaching, and high standards, while following the provided recipes and game plans to ensure consistency and quality.· Communicate technical concepts and advanced pastry skills in a clear, encouraging, and approachable manner.· Maintains expertise by staying current on products, actively engaging in available training, and independently seeking out additional resources.Sales & Business Performance· Drive sales by upholding kitchen standards, encouraging second class sign-ups through strong customer engagement, and promoting retail items used or featured in class.· Deliver class revenue goals by ensuring high enrollment, positive reviews, and guest return rates.· Consistently meet or exceed culinary program goals by delivering exceptional classes that drive customer engagement and sales. Performance is measured by key KPIs such as second-class sign-ups, retail culinary product sales, and guest feedback through Google reviews.Team Engagement & Store Support· Assist in setting up and breakdown of classes including organizing mise en place, prepping ingredients, and cleaning workstations.· Clean and sanitize dishes and equipment promptly to ensure smooth kitchen operations.· Assist with restocking, organizing, and maintaining kitchen supplies and tools to support overall store readiness. Operations & Compliance· Ensure compliance with food safety standards, local health codes, and sanitation regulations.· Properly handle all tools, ingredients, and kitchen equipment to maintain a safe and efficient work environment.· Maintain accurate inventory levels, minimize shrink, and control supply and culinary expenses.· May handle liquor, wine, and beer in compliance with state and location alcohol regulations, company policies, including enforcing age restrictions.· Ensure store safety and cleanliness, addressing any maintenance needs promptly.· Adhere to applicable wage and hour laws. Accurately records time worked according to SLT Policy.· Model and ensure consistent adherence to all Sur La Table policies and standard operating procedures (SOPs). Physical Requirements· Ability to communicate verbally and work cooperatively with associates and customers.· Ability to remain standing for up to 4 hours at a time.· Ability to move about the store directing class participants while selling to customers and retrieving merchandise from stockroom or sales floor.· The capability to accurately perceive and differentiate variations in intensity or quality of flavors or odors, or to identify specific tastes or scents using the tongue or nose.· Ability to grab, reach, push, pull, bend, stoop, kneel and crouch to demonstrate, retrieve and/or replenish merchandise and/or cooking equipment.· Ability to use hands to seize, hold, grasp, turn, or otherwise to chop, whisk, slice, stir, juice and/or demonstrate other techniques.· Ability to lift and/or move merchandise weighing up to 50 lbs.· Ability to ascend/descend ladders to retrieve and/or move merchandise.· Ability to operate a computer, POS system, keyboards, merchandise scanners and mouse to accomplish work.· Available to work between 12 and 16 hours per week, with a flexible schedule, including nights, weekends, and holidays. While this is the minimum availability, scheduled hours may differ based on business needs.· Regular and predictable attendance with the flexibility to adjust class assignments based on demand.· Ability to work in a variable kitchen environment included but not limited to open flames, hot surfaces, temperature variations, various food allergens both physical and airborne. Qualifications & Experience· Must be 21 years of age or older at the time of employment.· A degree in culinary arts is preferred; however, candidates with extensive culinary experience and demonstrated technical proficiency will be considered in lieu of formal education.· 1-2 years of kitchen operations experience.· Valid Food Manager Certification.· Excellent communication, problem-solving, and decision-making abilities.· Passion for community engagement and providing exceptional customer experiences.This job description represents a summary of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. Responsibilities, tasks, and duties of the jobholder might differ from those outlined in the job description and other duties, as assigned, may be part of the job. This job description is not an employment agreement or contract. Sur La Table has the exclusive right to alter this job description at any time without notice. The CSC family of brands provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, provincial, state or local laws. It is unlawful in Massachusetts to require or administer a lie-detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. The CSC family of brands is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, please contact . We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Summary Committed to the constant pursuit of excellence in improving the health status of the patient and decreasing Emergency Room visits/readmission rates, ensures the safe and effective transfers of patients across the care continuum, serving as the bridge between the professional staff in a care setting (e.g. Clinic), the patient and/or family, and the community healthcare provider. Informs and guides both staff and patients working to ensure an effective care transition from the Clinic to the patient’s home; helps teach and train patient self-management skills as well as enhancing patient-healthcare provider communication; and provides support to Hospital personnel and community partners in the field and provides assistance by phone or in-person to high-risk beneficiaries by identifying social determinants of health and connecting them to community services. This position does not have direct reports. Essential Functions: % of Time Enrollment • Accepts referrals from Dignity Health Internal Medicine Clinic Physicians, • Meet with patient/family in the Clinic to introduce the program and gather enrollment data, • Reinforces program enrollment and patient responsibilities with the patient and/or caregiver Advocacy Ensuring professional boundaries are maintained with all aspects of patient’s interaction and care delivers patient care advocacy to include: • Serves as a Patient Care Advocate to the patient, coaching the patient and caregivers in addressing social determinants of health, • Provides information and navigation to the patient and/or family for an effective care transition, improved patient self-management skills and enhanced patient-healthcare provider communication, • Evaluates aspects of each patient’s condition, diagnoses, medications, and support systems to formulate an individualized plan which will lead to successful outcomes in:, • Medication self-management, • Use of a dynamic patient-centered record, • Appropriate primary care and specialist follow-up, • Knowledge of red flags, • · Reinforces instruction from medical providers and interdisciplinary team, does not provide clinical or medical advice, • · Serves as a liaison between primary care providers, and community resources on behalf of patients to ensure patient-centered coordination of care, • Works in the Clinic and community, makes home visits and follow-up phone calls Data Collection & Custodian of Records • Completes the necessary assessments and referrals by collecting data on clinical indicators Continuous Improvement & Quality • Ensures compliance with all AllThrive 365 policies, procedures, and practices regarding the CATCH Transitional Care program, and other contract and licensure requirements laws related to patient confidentiality, release of information, and HIPAA; and applies knowledge to the work in accordance with quality standards, • Uses safe work practices, • Promptly reports workplace and patient safety issues to supervisor, • Attends and actively participates in initial and on-going training and development programs and opportunities, weekly unit meetings all staff meetings, and demonstrates learned concepts on the job, • Participates in assigned work teams, as requested and appropriate, • Engages in continuous improvement efforts, as assigned, and strives to continuously improve the quality of care and self Miscellaneous • Building, cleaning, and organizing durable medical equipment Requirements Education & Experience, Knowledge/Understanding • Bachelor’s Degree in Social Work, Human Services, Psychology or Public Health or Nurse (LPN or RN) Licensed by the Arizona Board of Nursing, • Minimum of 2 years of working with patients in a primary care setting or related work experience, • Valid AZ driver’s license and acceptable MVR, • Valid CPR/First Aid Certification or ability to obtain within 30 days of position entry, • Must be at least 21 years of age, • Clear fingerprint background screening through the Department of Public Safety and comprehensive background clearance Skills • Excellent verbal, written, reading, and listening communication skills to include communicating clearly, effectively, tactfully, and patiently to a diverse population, • Strong interpersonal skills and demeanor with the ability to build rapport and garner trust with others, • Accurate keyboarding skills, • Strong planning, organization and time management skills in order to meet deadlines, • Proficient in the use of healthcare data management systems such as CarePort, Cerner, and Apricot, • Proficient in the use of a PC; in a Windows environment; in the use of the Internet; and in the use of MS Office Applications such as Outlook, Teams, and Word, and the use of SharePoint Abilities • Ability to interact with others in a professional, respectful, positive, helpful manner, promoting trust with others, and build and maintain strong, effective working relationships with internal and external customers, • Ability to follow-up and follow-through with strong attention to detail, • Ability to follow oral and written instructions, • Ability to maintain patient confidentiality, privacy and dignity at all times, • Ability to work both independently and collaborative as part of a team, • Ability to travel up to 50% of the time within the Greater Metropolitan Phoenix area using personal vehicle properly insured, • Ability to solve problems by applying analytical skills to include:, • collecting and reporting information, • Identifying trends and exceptions, • investigating to define problems more accurately, • sorting information in order of importance, • identifying relationships and linkages between components, • identifying variable potential causes and effects, • soliciting guidance to define criteria and assign values of importance and urgency, • escalating issues of an exceptional nature, • Willingness and ability to embody AllThrive 365’s core values:, • COMPASSION, • GROWTH, • RESILIENCE, • OPENNESS Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. • The work environment characteristics described are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Normal office environment; clinical or patient care setting to include hospitals, physician offices, clinics and patient homes., • While performing the duties of this position, the employee is regularly required to: talk and hear, including over the telephone, in normal range; use hands to finger, handle or feel objects, tools/equipment or controls; sit for extended periods of time, stand, reach with hands and arms, and walk. Occasionally required to stoop, kneel or crouch; lift and/or move up to 30 pounds. Vision required includes close vision, distance vision, and ability to adjust focus Preferences • Healthcare experience, • Knowledge of needs of older adults, the aging process, and the needs of adults with Disabilities, adults with traumatic brain injuries (or TBI) or SMI, • Bilingual in English/Spanish

Job Description About Fresh Start A pillar in the Phoenix community for 30 years, Fresh Start’s mission is to provide access and resources that help women achieve self-sufficiency and use their strength to thrive. We envision and work towards establishing a future of unlimited opportunities for women. Fresh Start empowers women to succeed by providing a wide range of comprehensive, wrap-around services. Our work—centered around helping women achieve economic self-sufficiency and personal empowerment—focuses on five key areas of service provision: family stability; health and well-being; financial management; education and training; and careers. Fresh Start has served thousands of women aged 18 and older, supporting them as they transform their lives and, in turn, transform the lives of their children, families, and the broader community. Diversity is a core value at Fresh Start. We are passionate about building and sustaining an inclusive, equitable working and learning environments for all clients, staff, and stakeholders. We believe every member of our team enriches our diversity: they contribute their expertise, talents, and life experience, broadening the ways we understand and engage the world, identify challenges, discover, design, and deliver innovative solutions. Overview of the Role As a data analyst, you will play a key role in transforming data into meaningful insights that inform decision-making across Fresh Start. You will work with teams throughout the organization to understand their goals and translate them into effective reporting and analysis. Your work will include building clear, interactive dashboards in Power BI, managing and optimizing data in Snowflake, and ensuring the accuracy and quality of information drawn from systems such as Apricot and HubSpot. You will be responsible for analyzing data to identify trends, preparing reports for grants and leadership, and maintaining strong data processes that support both day-to-day operations and long-term strategy. What you’ll do: • Design and build interactive dashboards and reports in Power BI, using DAX and data modeling to communicate insights clearly., • Collaborate with stakeholders across programs, development, and leadership to understand data needs and translate business requirements into technical solutions., • Collect, clean, and organize data from multiple systems (including Apricot, HubSpot, and Snowflake) to ensure accuracy, consistency, and completeness., • Maintain and optimize the Snowflake data warehouse, including query performance tuning, access management, and monitoring usage., • Develop, transform, and model data using SQL and Snowflake to prepare datasets for reporting and analysis., • Compile and distribute KPI and metric reports to measure program outcomes, track grant performance, and inform executive decision-making., • Conduct data analysis to identify patterns, trends, and insights that guide organizational strategy., • Perform regular data quality audits and implement processes for data validation, cleaning, and error resolution., • Improve and streamline data processes, identifying opportunities for automation, efficiency, and better integration across systems., • Document data processes, transformations, and reporting standards to ensure transparency, reproducibility, and organizational knowledge sharing., • Bachelor's degree in data analytics, mathematics, statistics, computer science, or related field, • Proven experience with Power BI, including DAX, modeling, and dashboard/report development., • Advanced SQL skills for querying and data transformation., • Experience working with Snowflake for querying and reporting (basic maintenance and optimization)., • Familiarity with Apricot and/or HubSpot., • Strong problem-solving and analytical skills., • Experience compiling KPI reports., • Excellent problem-solving and analytical skills., • Strong written and verbal communication skills, with the ability to explain technical information to non-technical audiences., • Skilled in data analysis and interpretation, with the ability to turn large, complex data sets into meaningful insights., • Experienced in data modeling and visualization, able to design clear dashboards and reports in Power BI using DAX and modeling best practices., • Technically strong, with advanced knowledge of SQL and Excel, and familiarity with systems such as Apricot and HubSpot., • A problem-solver and critical thinker who approaches challenges with logic, creativity, and persistence., • Detail-oriented, ensuring accuracy and consistency in all reports and analyses., • A strong communicator, able to present complex information in a clear, concise, and accessible way., • Organized and capable of managing multiple projects, prioritizing effectively, and meeting deadlines., • Equipped with business acumen, connecting data insights to organizational goals and strategy., • A collaborative team player who builds relationships and works well with colleagues across departments., • Generous paid vacation, sick and holidays., • Comprehensive health insurance., • Passionate team members and a fun office environment.

Job Description CNC Machinist - NIGHT SHIFT Mill & Lathe Department openings Aerospace & Defense Manufacturing Location: 1515 W 17th St, Tempe, AZ 85281 Shift: Night shift Department: Mill or Lathe REQUIRED: Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. RESPONSIBILITIES: • Operate CNC machines without oversight running proven production jobs, • Understand process trouble shooting techniques with the ability to display those attributes, • Demonstrate proper setup techniques, loading, indicating, touch off, of all tooling. Ability to load programs and verify correct operation, revision, etc. Cutting jaws and loading of needed fixtures. First piece buy-off, • Daily machine maintenance (checking fluid levels, cleaning out chips, etc.), • Maintaining a clean and organized work space, • Clear understanding of CNC controls including G & M program codes, • Tool management, entering in offsets without oversight to compensate for tool wear etc. Replacement of worn and damaged tools (inserts, boring bars, end mills, drills, etc.), • Ability to read and have a clear understanding of B/P’s including assemblies, dimensions, tolerances, symbols, notes, abbreviations, GD&T (geometric dimensioning and tolerancing), and any other standard nomenclature per customer, government, or industry standards, • Proper use of basic inspection, measuring and test equipment to verify machined dimensions of product. Working knowledge of the use of dial bore gages, air gages, intertest gages, etc., • In-process inspection of parts machined. Recording inspection data at the prescribed intervals per the inspection traveler or other company paperwork, • Filling out MOT and job routers, • Maintaining correct part counts on the MOT for the operations performed, • Tagging hardware and recording discrepancies on proper paperwork for hardware known to be discrepant. ALL issues are to be addressed with lead personnel upon discovery, • Communicate any job related issues/questions (part feature, program, inspection, etc.) to lead personnel for resolution and or clarification, • Reporting all machine collisions and malfunctions to lead personnel, • Ability to use computer software, company ERP system, clocking in and out of jobs, etc., • 2 – 5 years of experience running CNC lathes or CNC mills, • Good understanding of GD&T and industry standards of inspection The Company is equal opportunity employer providing competitive wages and benefits. Medical, dental, vision, disability and life insurance available. 401(k) with company match. This is an equal opportunity employer and will not discriminate against any employee or applicant due to age, race, disability, veteran status, religion, sexual orientation, gender or any other protected classification. VEVRAA federal subcontractor. This company provides provide equal employment opportunities to applicants without regard to race, color, religion, gender, age, national origin, or disabilities in compliance with federal and state laws including: • The Civil Rights Act of 1964 as Amended, • Age Discrimination Act of 1967 as Amended, • Rehabilitation Act of 1973, • Vietnam Era Veterans Readjustment Act of 1974, • Americans with Disabilities Act Amendment Act of 2009 (ADAAA), • The Wagner-Peyser Act as Amended., • The Workforce Innovation and Opportunity Act, • Fair Credit Reporting Act, 15 U.S.C. 1681 et seq

Job DescriptionDescription: Arbor Lodging is a leading hotel investment and management company with a growing portfolio of hotels throughout the United States, Mexico, and the Caribbean. We have been entrusted by numerous partners and are approved managers for Marriott, Hilton, Hyatt, and IHG. Our service ethos is proactive and holistic, fostering an environment where guests feel truly welcomed and supported at every interaction. Our culture is people-focused, data-driven, and results-oriented. Summary: The Houseperson is responsible for cleaning and maintaining designated areas of the hotel and responding to guest requests in the hotel's continuing effort to deliver outstanding guest service. Duties & Responsibilities: • Assure cleanliness of hotel grounds, entrances, storage facilities, trash areas, guest and back-of-house hallways, elevators, staircases, and guest rooms, • Communicate efficiently with managers regarding maintenance issues, room damage, or missing property, • Interact with teammates and guests in a friendly and professional way, • Deliver items to hotel guests as directed, • Assist with TV remotes, TV boxes, thermostats, jacuzzi tubs, light fixtures, phones, and moving furniture, • Support laundry and/or housekeeping departments when needed, • Distribute linen, housekeeping supplies, and room amenities properly, • Properly stock carts with cleaning and paper supplies?, • Ability to lift 50 lbs. and walk, sit, or stand for extended periods time, • Ability to lift, pull, and push moderate weight, • Flexibility to work nights, weekends, and holidays, • Strong task and time management abilities, • Competitive salary, • Annual review with increase potential, • 401k program with company match, • Medical, Dental, and Vision insurance available to eligible employees, • Wellness benefits available to eligible employees Arbor’s Guiding Principles: Arbor Lodging focuses on Five Guiding Principles to foster a culture where growth, development, and progression thrive within the properties: • Do the Right Thing - Operate and act with integrity in all you do even when it is not convenient., • Lead with Heart - Be kind, passionate and hospitable., • Be Accountable - Take ownership and deliver results., • Aim Higher - Go above and beyond to exceed expectations and pursue thoughtful change. Arbor Lodging Management provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Arbor Lodging Management complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Flow Distribution is seeking a Lab Technician to assist with various tasks in our busy cannabis extraction lab. This position will be able to work quickly and efficiently while also multitasking. Responsibilities will include maintaining glassware, grinding and packing material, and lab cleanup. DUTIES AND RESPONSIBILITIES: • Follow Standard Operating Procedures (SOP), • Maintains glassware by picking-up, cleaning, washing, sterilizing, and organizing, • Grinding material, • Assist with intake and processing of material, • General housekeeping of all lab rooms, • Assisting extraction team as needed, • Maintaining accurate batch records, • Preparing concentrate for specific processes, • Monitor lab supply materials and notify team when items need replacement, • Resolving problems by examining and evaluating data, selecting corrective steps, • Enhancing laboratory by accepting ownership for accomplishing new and different requests while exploring opportunities to add value to job accomplishments, • Prior lab experience is desirable but not required, • Must have reliable transportation, • Must be 21 years of age and authorized to work in the US with proper employment documentation., • Must have or be willing to obtain a Facility Agent Card through AZDHS, • Have weekend availability Job Type: Full-time Pay: $16.00 - $18.00 per hour Expected hours: 40.00 per week Schedule: • 10 hour shift, • 8 hour shift, • Day shift, • Evening shift, • Monday to Friday, • Morning shift, • Weekends as needed Work Location: In person We are an equal opportunity employer and considers all qualified applicants equally without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.