Trabajos electrician en El Cajon, CaliforniaCrear alertas

Amee Bay, LLC, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an experienced Naval Marine Shipboard Electrician to join our team in San Diego, CA. Position Overview: 1st Class electricians test, manufacture, troubleshoots, repair, red-line drawings and make design recommendations for electrical and electronic equipment. The employee will perform a wide variety of different tasks depending on the needs of the company. Position Responsibilities: \n • Knowledge of navy AC (60 and 400 Hz) and DC electrical systems\n, • Navy tag-out, WAF programs and applicable Naval procedures / instructions\n, • Maintain QWI and associated forms\n, • Implements and monitor OSHA safety\n, • Demonstrate the ability to supervise junior personnel\n, • Knowledge of Navy electrical and electronic systems\n, • Able to troubleshoot, disassemble, and inspect electrical equipment\n, • Able to clean electrical equipment and parts, reassemble, and operationally test equipment.\n, • Knowledge of electrical systems such as switchboards, switchgear, distribution panels, controls, etc.\n, • Versed in the use of common electrical measuring instruments, and of various electronic measuring devices, such as voltmeters, ammeters, ohmmeters, power analyzers and megohmmeters.\n, • Familiar with the use of Precision Measuring Instrumentation\n, • Ability to read and interpret blueprints, sketches, written technical instructions and manuals.\n, • Ability to plan and make working diagrams and circuits.\n, • Capable of cable run fabrication and wire way fabrication\n, • US Citizenship\n, • Must be able to obtain/maintain security and base access clearance. Active clearance is preferred \n, • High School Diploma or equivalent\n, • Navy 'A' / 'C' school(s) or completion of a vocational, maritime, or journeyman training program.\n, • Minimum eight (8) years' experience.\n, • Must have a valid U.S. Driver's License\n, • Must pass drug screening.\n\n This position is located in San Diego, CA. The hourly rate for this position is $25.00 - $30.00 based on experience To apply: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Amee Bay, LLC a subsidiary of Three Saints Bay, LLC and a Federal Government Contractor industry leader, is seeking an Apprentice Electrician to join our Team in San Diego, CA. Qualified Candidates will be able to: \n • Work closely with Senior Electricians to develop or improve current knowledge of various shipboard electrical tasks.\n, • Learn how to read electrical drawing/diagrams.\n, • Develop key skills to execute clean and efficient wiring in cabinets.\n, • Learn to properly route cables throughout cableways.\n, • Transport materials, tools, and equipment to and within work sites as required.\n, • Inventory received material.\n, • Help maintain a clean worksite.\n, • Assist senior technicians with drilling, cutting, and modifying various shipboard items.\n, • US Citizenship.\n, • Must meet requirements to obtain a Federal Secret Clearance.\n, • High School Diploma or equivalent.\n, • Minimum of one (1) year of marine/maritime related experience.\n, • Ability to perform general maintenance tasks.\n, • Ability to follow written and verbal instructions.\n, • Knowledge of relevant tools and equipment.\n, • Ability to work aboard ships which includes frequent climbing, bending, and working in confined spaces.\n, • Must have a Valid U.S. Driver's License.\n, • Must pass drug screening as a condition of employment.\n\n This position is located in San Diego, CA. The hourly wage for this position is $18.00 to $22.00, based on experience. To apply: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Amee Bay, LLC, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an experienced Naval Marine Shipboard Electrician to join our team in San Diego, CA. Position Overview: 1st Class electricians test, manufacture, troubleshoots, repair, red-line drawings and make design recommendations for electrical and electronic equipment. The employee will perform a wide variety of different tasks depending on the needs of the company. Position Responsibilities: \n • Knowledge of navy AC (60 and 400 Hz) and DC electrical systems\n, • Navy tag-out, WAF programs and applicable Naval procedures / instructions\n, • Maintain QWI and associated forms\n, • Implements and monitor OSHA safety\n, • Demonstrate the ability to supervise junior personnel\n, • Knowledge of Navy electrical and electronic systems\n, • Able to troubleshoot, disassemble, and inspect electrical equipment\n, • Able to clean electrical equipment and parts, reassemble, and operationally test equipment.\n, • Knowledge of electrical systems such as switchboards, switchgear, distribution panels, controls, etc.\n, • Versed in the use of common electrical measuring instruments, and of various electronic measuring devices, such as voltmeters, ammeters, ohmmeters, power analyzers and megohmmeters.\n, • Familiar with the use of Precision Measuring Instrumentation\n, • Ability to read and interpret blueprints, sketches, written technical instructions and manuals.\n, • Ability to plan and make working diagrams and circuits.\n, • Capable of cable run fabrication and wire way fabrication\n, • US Citizenship\n, • Must be able to obtain/maintain security and base access clearance. Active clearance is preferred \n, • High School Diploma or equivalent\n, • Navy 'A' / 'C' school(s) or completion of a vocational, maritime, or journeyman training program.\n, • Minimum eight (8) years' experience.\n, • Must have a valid U.S. Driver's License\n, • Must pass drug screening.\n\n This position is located in San Diego, CA. The hourly rate for this position is $25.00 - $30.00 based on experience To apply: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Career Area: Operations Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. About the Role: The Industrial Electronic Electrician Maintenance Technician will construct, install, modify, maintain and/or repair industrial electronic systems and related equipment utilized within buildings, facilities and machinery by interpreting blueprints, wiring, schematic diagrams, following technical, oral or written instructions. They will analyze and correct the malfunctioning of such industrial electronic equipment as spot, flash, seam and roll welding machines, plasma arc control systems, automatic, heli-arc, induction heater and numerical control/ CNC machine systems. What You Will Do: \n • Install, maintain, test, troubleshoot, and repair electrical/electronic systems, controls, and components of manufacturing machine tools and production equipment\n, • Use knowledge, manuals, schematic diagrams, blueprints, sketches, electrical codes and other specifications to perform work; May work without instructions or documentation\n, • May design circuitry to modify control designs to repair or improve electronic controls and control systems\n, • May produce schematics, sketches, or other documentation to record accomplished work\n, • Diagnose, test, repair or replace malfunctioning electron controls or control related components on manufacturing machine tools and related production equipment\n, • May repair or modify printed circuit cards\n, • May program computer controls for production equipment and machine tools; function does not include writing numerical control programs that operate machine tools or create tool paths to manufacture products\n, • May perform the functions of the Industrial Maintenance Electrician\n, • May communicate directly with manufacturers' technical or engineering support to resolve machine tools or other production equipment problems\n, • Employees must have the skills and knowledge to perform this work in a safe manner in compliance with published codes and manufactures recommendations\n, • Uses hand-tools, power tools, and electrical and electronic test equipment\n\n What You Have: \n • High School Diploma, GED or equivalent\n, • Must be able to pass basic aptitude tests\n, • Candidates should possess strong initiative, leadership ability, interpersonal and communication skills, and computer literacy\n\n Preferred Qualifications: • Must have a minimum of 3 years of solid electrical background with experience in in-depth PLC troubleshooting a plus and possess licenses and/ or certificates as required by state and local codes and ordinances\n Summary Pay Range: $36.47 - $54.71 Compensation and benefits may vary depending on multiple individualized factors, job level, market, location, job-related knowledge, skills, individual performance, and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. \n • Medical, dental, and vision benefits*\n, • Paid time off plan (Vacation, Holidays, Volunteer, etc.)*\n, • 401(k) savings plans*\n, • Health Savings Account (HSA)*\n, • Flexible Spending Accounts (FSAs)*\n, • Health Lifestyle Programs*\n, • Employee Assistance Program*\n, • Voluntary Benefits and Employee Discounts*\n, • Career Development*\n, • Incentive bonus*\n, • Disability benefits\n, • Life Insurance\n, • Parental leave\n, • Adoption benefits\n, • Tuition Reimbursement\n, • Sign-on bonus\n\n, • These benefits also apply to part-time employees Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at . Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Amee Bay LLC, a subsidiary of Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an Electrician Foreman to join your team in San Diego, CA. Position Overview: Electrician Foreman supervises and/or accomplishes manufacture, troubleshooting, repair, and installation of electrical and electronic equipment. The employee will perform a wide variety of different tasks depending on the needs of the company. Position Responsibilities: \n • Supervising and coordinating the activities of electricians\n, • Reading blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly\n, • Installing, inspecting, testing, maintaining, and repairing electrical systems and equipment\n, • Ensuring compliance with safety procedures and regulations\n, • Interacting with contractors and clients in order to ensure successful contract accomplishment\n, • Training and mentoring electrical workers\n, • Preparing estimates, budgets, and work timetables\n, • Ensuring all electrical installations meet quality and legal standards\n, • Knowledge of navy AC (60 and 400 Hz) and DC electrical systems\n, • Navy tag-out, WAF programs and applicable Naval procedures / instructions\n, • Maintain QWI and associated forms\n, • Implements and monitor OSHA safety\n, • Knowledge of Navy electrical and electronic systems\n, • Able to troubleshoot, disassemble, and inspect electrical equipment\n, • Able to clean electrical equipment and parts, reassemble, and operationally test equipment.\n, • Knowledge of electrical systems such as switchboards, switchgear, distribution panels, controls, etc.\n, • Versed in the use of common electrical measuring instruments, and of various electronic measuring devices, such as voltmeters, ammeters, ohmmeters, power analyzers and megohmmeters.\n, • Familiar with the use of Precision Measuring Instrumentation\n, • Ability to read and interpret blueprints, sketches, written technical instructions and manuals.\n, • Ability to plan and make working diagrams and circuits.\n, • Capable of cable run fabrication and wire way fabrication\n \n • US Citizenship\n, • Must be able to obtain/maintain security and base access clearance. Active clearance is preferred \n, • High School Diploma or equivalent\n, • Navy 'A' / 'C' school(s) or completion of a vocational, maritime, or journeyman training program.\n, • Minimum eight (8) years' experience.\n, • Proven work experience as an Electrical Foreman or similar role\n, • In-depth knowledge of electrical systems and electrical code\n, • Ability to read and interpret electrical drawings and blueprints\n, • Excellent leadership and project management skills\n, • Strong problem-solving abilities\n, • Good communication skill\n, • Must have a valid U.S. Driver's License\n The salary for this position is $75k - $85k based on experience. Please apply online at: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Company Overview At General Dynamics Ordnance and Tactical Systems, our employees are the heart of our company. We invite you to apply to join our team of employees who are dedicated to excellence that meet the needs of the warfighters and our customers around the world, day in and day out. Job Summary The Electro-Mechanical Technician is responsible for a range of tasks related to systems integration equipment and process operations that require technical expertise. This role includes testing, assembling, and evaluating various types of AC and DC components. Candidates must possess knowledge and experience in utilizing electronic and mechanical equipment, such as multimeters, power supplies, oscilloscopes, and calipers, as well as a solid understanding of AC and DC theory. Impact of the Role General Profile \n • Acquires basic skills to perform routine tasks\n, • Develops understanding in an analytical or scientific method or operational process\n, • Works with close supervision\n, • Performs manual tasks according to established procedures\n Essential Functions \n • Assists with inspecting, repairing, installing, and maintaining electrical systems, machinery, and equipment.\n, • Ensures all work performed meets required safety codes and is properly inspected.\n, • Uses a variety of tools and equipment, such as power construction equipment, measuring devices, power tools, and testing equipment.\n, • Supports with testing electrical systems to ensure proper installation and operation.\n, • Inspects electrical systems to determine whether repairs are needed.\n, • Assists with replacing conduit, wiring and circuit breakers as needed.\n Required Qualifications • \nRequired education and experience: Attending a Vocational / Technical School or internal training program OR Equivalent Combination of Relevant Education & Experience or Skillset; No prior experience needed Preferred Qualifications \n • \nPreferred education and experience: Vocational/Technical Training Degree\n, • \nDiscipline/Major: Technical training preferred\n, • \nAdditional certifications: Typically requires an Electrician's license granted by state\n, • \nKnowledge, skills & abilities: Electrical Wiring Installation. Install Electrical Services. Reading Blueprints/Diagrams. Safety Inspections. Troubleshooting Electrical Codes.\n Physical Requirements \n • Requires regular movement throughout GD-OTS facilities.\n, • Must be able to lift up to 45 pounds.\n, • May need to stand for long periods of time.\n, • Work may require employee to work inside and outside with exposure to changing climate and/or operate machinery.\n, • May be requested to work a different shift.\n, • Must be willing to work outside normal business hours as required\n, • This position is Safety-Sensitive.\n Travel Requirements No or very little travel likely. Pay Range (USD) $42,243.00 - $57,153.00 Pay Transparency Statement The salary range displayed reflects the minimum and maximum for salary for this position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, internal equity, and relevant education or training. Your recruiter can share more about the range during the hiring process. Additional Compensation Hired applicant may be eligible to participate in the Company's Gain Sharing Program. Benefits Employees are eligible for medical, dental, vision, short and long-term disability, and basic life insurance as well as pre-tax spending accounts. Employees are also able to enroll in the company's 401k plan and are eligible for the Non-Contributory Retirement Contribution. In addition to the benefits discussed above, the company offers the following voluntary benefits: Critical Illness Insurance, Accident Insurance, Identify Theft Protection, Enhanced Legal Services, Auto and Home Insurance, Pet Insurance, Commuter Benefits, Hospital Indemnity Insurance, Educational Assistance. PTO, Holiday, and Family Leave Employees will receive 11 paid holidays and 120 hours of PTO annually and up to 3 weeks paid family leave. The above statements describe the general nature and level of work only. The statements do not represent an exhaustive list of required responsibilities and skills. Other duties may be added or this job description may be amended at any time. This job description does not alter an employee's at-will employment status or create an employment agreement or contract, implied or otherwise.

The Marine Electrician-Level IV Technician will provide troubleshooting, maintenance, repair and material assessment of various types of boat electrical systems and components in accordance with Navy guidance and OEM technical specifications in CONUS & OCONUS locations, as required. ROLES AND RESPONSIBILITIES: • Uses technical knowledge and experience to troubleshoot and identify causes for equipment/system failure to the component level., • Ability to perform services in accordance with applicable OEM tech manuals., • Maintain and repair boat electrical systems and communications equipment to include but not limited to:, • Running lights, • Battery system, • GENTEX communication boxes, • UHF and VHF tactical communications equipment, • Satellite communications (SATCOM), • 110A Alternators, • Battery Isolators, • Furuno radar displays and radome, • VIC 3 and VIC 5 Communications systems, • H.S. Diploma or equivalent., • Minimum of 5 years' general experience in their respective trade and at least 3 consecutive years of experience repairing and troubleshooting the aforementioned boat electrical systems and communication equipment., • Familiarity with Navy Boat Information Book (BIB) and drawings., • Comprehension & application of technical documentation - Manuals & drawings., • Knowledge of proper use of diagnostic equipment., • Possess basic computer skills with working knowledge of Microsoft Outlook, Word and Excel., • Possess organizational skills., • Possess effective oral and written communication., • Must be able to lift, carry and transport heavy equipment and boxes up to 50 lbs., • Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc.)., • Ability to be able to work in maintenance shop environment, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions., • Possess or ability to obtain and maintain a secret clearance, • Travel requirement less than 25%, • Ability to travel overseas when required Please note: The annualized pay range referenced is a general guideline. Solvere Technical considers factors such as (but not limited to) the following when determining base pay: scope and responsibilities of the position, candidate's related work experience, education/training/certifications, key skills, internal peer equity/external market competitiveness, as well as other business considerations. BENEFITS Solvere offers a comprehensive and generous benefits package. The Solvere benefits package includes medical, dental, and vision insurance for the employee and/or families. Solvere also includes basic life insurance plus short- and long-term disability for the employee. Employees may elect to enroll in our company's 401k plan. Employees will also accrue paid time off and holidays. Additional voluntary options include supplemental insurance plans. About the Company Visit: Solvere Technical Group is committed to non-discrimination and equal employment opportunity. All qualified applicants will receive consideration for employment without discrimination based on disability, protected veteran status or any other characteristics protected by law.

Company Overview At General Dynamics Ordnance and Tactical Systems, our employees are the heart of our company. We invite you to apply to join our team of employees who are dedicated to excellence that meet the needs of the warfighters and our customers around the world, day in and day out. Job Summary The Electro-Mechanical Technician is responsible for a range of tasks related to systems integration equipment and process operations that require technical expertise. This role includes testing, assembling, and evaluating various types of AC and DC components. Candidates must possess knowledge and experience in utilizing electronic and mechanical equipment, such as multimeters, power supplies, oscilloscopes, and calipers, as well as a solid understanding of AC and DC theory. Impact of the Role General Profile \n • Requires basic skills in an analytical or scientific method or operational process\n, • Works within clearly defined standard operating procedures and/or scientific methods and adheres to quality guidelines\n, • Works with close supervision\n, • Performs manual tasks according to established procedures\n Essential Functions \n • Inspects, repairs, installs, and maintains electrical systems, machinery, and equipment.\n, • Ensures all work performed meets required safety codes and is properly inspected.\n, • Uses a variety of tools and equipment, such as power construction equipment, measuring devices, power tools, and testing equipment.\n, • Tests electrical systems to ensure proper installation and operation.\n, • Inspects electrical systems to determine whether repairs are needed.\n, • Replaces conduit, wiring and circuit breakers as needed.\n Required Qualifications • \nRequired education and experience: Vocational/Technical Training Degree and 1-2 years' experience OR Equivalent Combination of Relevant Education &/or Experience Preferred Qualifications \n • \nPreferred education and experience: Associate's Degree\n, • \nDiscipline/Major: Technical training preferred\n, • \nAdditional certifications: Typically requires an Electrician's license granted by state\n, • \nKnowledge, skills & abilities: Electrical Wiring Installation. Install Electrical Services. Reading Blueprints/Diagrams. Safety Inspections. Troubleshooting Electrical Codes\n Physical Requirements \n • Requires regular movement throughout GD-OTS facilities.\n, • Must be able to lift up to 45 pounds.\n, • May need to stand for long periods of time.\n, • Work may require employee to work inside and outside with exposure to changing climate and/or operate machinery.\n, • May be requested to work a different shift.\n, • Must be willing to work outside normal business hours as required\n, • This position is Safety-Sensitive.\n Travel Requirements No or very little travel likely. Pay Range (USD) $41,811.00 - $77,649.00 Pay Transparency Statement The salary range displayed reflects the minimum and maximum for salary for this position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, internal equity, and relevant education or training. Your recruiter can share more about the range during the hiring process. Benefits n/a PTO, Holiday, and Family Leave N/A The above statements describe the general nature and level of work only. The statements do not represent an exhaustive list of required responsibilities and skills. Other duties may be added or this job description may be amended at any time. This job description does not alter an employee's at-will employment status or create an employment agreement or contract, implied or otherwise.

Summary You will serve as an ELECTRICIAN LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will serve as an Expert Electrician leading a group to ensure work assignments are completed.\n, • You will be responsible for the repair, overhaul, installation, modification, calibration, and test of electrical systems and equipment on naval surface ships and submarines, both nuclear and non-nuclear.\n, • You will set up, operate, and troubleshoot various types of equipment utilized to manufacture and overhaul surface and sub-surface ship's components.\n, • You will disassemble, clean, and replace visually found defective parts, reassemble, check for more faulty components, replaces the same, align, calibrate and check out equipment using known standards and test equipment.\n, • You will oversee adjustments and repairs to maintain operation of electrical equipment, cause of malfunction or defects and repairs or replaces worn, damaged, or defective parts.\n, • You will assure that all work assignments of the groups are carried out on any of the three shifts as assigned.\n, • You will pass instructions received from supervisors and provide overview of tasks to be performed to other workers.\n, • You will keep supervisor apprised of potential problems, controversial issues, and recommend corrective actions.\n, • You will inspect completed and in process work for quality of workmanship and adhere to requirements, specifications, standards, plans and schedules.\n, • You will perform research to continually improve trade processes and keep shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.\n, • You will ensure plans, blueprints, materials, and tools are available for specific jobs.\n, • You will mentor, train and instruct trade employees in a wide range of electrical equipment.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position may require work onboard ships, the ability to climb vertical ladders and work in awkward positions and confined spaces\n, • This position require may selectee to be willing and able to lift and/or carry loads/items up to 40 pounds in weight.\n, • The incumbent of this position must obtain, maintain and use a government travel card.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Amentum is actively seeking a Small Boat Engineering Technician Instructor with expertise in small craft and shipboard propulsion and auxiliary systems. This position is ideally suited for individuals with Engineering Department experience, proficient in Marine Propulsion, Electrical, Auxiliary and control systems. Work is performed at a Navy Training Command located at Naval Amphibious (NAB) Coronado, CA. Responsibilities: • Conduct preventive and corrective maintenance, • Operate and control casualties of propulsion systems in-port and underway on small navy watercraft, • Execute pre-start and post-operation checks, • Adhere to Amentum's Ethics Program, Workplace Environment, and Occupational Safety standards, • Maintain cleanliness of assigned work areas or craft\n Minimum Qualifications: • Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work location., • Six (6) years of experience as a Navy Engineman/Navy Construction Mechanic/Navy Electrician's Mate OR equivalent civilian experience, • Experience as a Navy Engineman/Navy Construction Mechanic/Navy Electrician's Mate OR equivalent civilian experience, • Ability to perform classroom instruction, underway laboratory training, preventative and corrective maintenance of Navy craft and support equipment, • Qualified as a Navy Second Class Swimmer or equivalent, • Availability to work alternate schedules as required by training needs, • Willingness to work occasional overtime, • Ability to work in both indoor and outdoor environments and conditions, • Ability to perform limited travel, as needed\n Preferred Qualifications: • Prior experience as a Navy Engineman, Electrician or Electronics Technician with Improved Navy Lighterage System (INLS), Maritime Prepositioning Force Utility Boat (MPFUB), Lighter Amphibious Resupply Cargo (LARC), Combat Rubber Raiding Craft (CRRC) or Amphibious Bulk Liquid Transfer System (ABLTS)., • Familiarity with CAT C18 & C4.4, John Deere 6081, Cummins QSM-11, Evinrude Outboard Engines, Hamilton and Wartsila Waterjets, hydraulic and electrical systems., • Experience with 460 and 115 Vac distribution systems, 24 Vdc, diesel engine electronic control systems and programmable logic controllers., • Experience performing preventive and corrective maintenance and preservation of Navy small craft., • Military Instructor certification.\n Service Contract Act (SCA) Compensation & Benefits: This is an hourly, overtime-eligible position that falls under the Service Contract Act (SCA). In accordance with the Health and Welfare provisions of the SCA, and in addition to your base hourly rate, you may be eligible to receive an additional health and welfare payment for each hour you work to ensure compliance with the minimums set forth by the act. The amount you are entitled to receive will vary depending upon the fringe benefits you select now and in the future. Service Contract Act (SCA) Compensation & Benefits: This is an hourly, overtime-eligible position that falls under the Service Contract Act (SCA). In accordance with the Health and Welfare provisions of the SCA, and in addition to your base hourly rate, you may be eligible to receive an additional health and welfare payment for each hour you work to ensure compliance with the minimums set forth by the act. The amount you are entitled to receive will vary depending upon the fringe benefits you select now and in the future. Compensation Details: $28.44 - 35.01 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. Benefits Overview: Our health and welfare benefits are designed to support you and your priorities. Offerings include: • Health, dental, and vision insurance, • Paid time off and holidays, • Retirement benefits (including 401(k) matching), • Educational reimbursement, • Parental leave, • Employee stock purchase plan, • Tax-saving options, • Disability and life insurance, • Pet insurance\n Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Original Posting: 03/18/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Company Overview At General Dynamics Ordnance and Tactical Systems, our employees are the heart of our company. We invite you to apply to join our team of employees who are dedicated to excellence that meet the needs of the warfighters and our customers around the world, day in and day out. Job Summary The Electro-Mechanical Technician is responsible for a range of tasks related to systems integration equipment and process operations that require technical expertise. This role includes testing, assembling, and evaluating various types of AC and DC components. Candidates must possess knowledge and experience in utilizing electronic and mechanical equipment, such as multimeters, power supplies, oscilloscopes, and calipers, as well as a solid understanding of AC and DC theory. Impact of the Role General Profile \n • Requires basic skills in an analytical or scientific method or operational process\n, • Works within clearly defined standard operating procedures and/or scientific methods and adheres to quality guidelines\n, • Works with close supervision\n, • Performs manual tasks according to established procedures\n Essential Functions \n • Inspects, repairs, installs, and maintains electrical systems, machinery, and equipment.\n, • Ensures all work performed meets required safety codes and is properly inspected.\n, • Uses a variety of tools and equipment, such as power construction equipment, measuring devices, power tools, and testing equipment.\n, • Tests electrical systems to ensure proper installation and operation.\n, • Inspects electrical systems to determine whether repairs are needed.\n, • Replaces conduit, wiring and circuit breakers as needed.\n Required Qualifications • \nRequired education and experience: Vocational/Technical Training Degree and 1-2 years' experience OR Equivalent Combination of Relevant Education &/or Experience Preferred Qualifications \n • \nPreferred education and experience: Associate's Degree\n, • \nDiscipline/Major: Technical training preferred\n, • \nAdditional certifications: Typically requires an Electrician's license granted by state\n, • \nKnowledge, skills & abilities: Electrical Wiring Installation. Install Electrical Services. Reading Blueprints/Diagrams. Safety Inspections. Troubleshooting Electrical Codes\n Physical Requirements \n • Requires regular movement throughout GD-OTS facilities.\n, • Must be able to lift up to 45 pounds.\n, • May need to stand for long periods of time.\n, • Work may require employee to work inside and outside with exposure to changing climate and/or operate machinery.\n, • May be requested to work a different shift.\n, • Must be willing to work outside normal business hours as required\n, • This position is Safety-Sensitive.\n Travel Requirements No or very little travel likely. Pay Range (USD) $41,811.00 - $77,649.00 Pay Transparency Statement The salary range displayed reflects the minimum and maximum for salary for this position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, internal equity, and relevant education or training. Your recruiter can share more about the range during the hiring process. Benefits n/a PTO, Holiday, and Family Leave N/A The above statements describe the general nature and level of work only. The statements do not represent an exhaustive list of required responsibilities and skills. Other duties may be added or this job description may be amended at any time. This job description does not alter an employee's at-will employment status or create an employment agreement or contract, implied or otherwise.

Summary You will serve as a ELECTRICIAN LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will determine placement of electrical distribution panels and other equipment.\n, • You will install, maintain, troubleshoot, or repair electrical equipment, systems, generators, switchboards, or control equipment in a shipyard environment.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will operate power tools (e.g., pipe benders, cutters, power drills) to cut, bend, fit, and thread components of electrical equipment and systems.\n, • You will use hand tools and test equipment to check alignment, output, or resistance to ground and other electrical characteristics.\n, • You will diagnose faulty electrical equipment or systems to determine rework or replacement of faulty components on nuclear ships alterations and repairs.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Summary You will serve as an ELECTRICIAN LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will serve as an Expert Electrician leading a group to ensure work assignments are completed.\n, • You will be responsible for the repair, overhaul, installation, modification, calibration, and test of electrical systems and equipment on naval surface ships and submarines, both nuclear and non-nuclear.\n, • You will set up, operate, and troubleshoot various types of equipment utilized to manufacture and overhaul surface and sub-surface ship's components.\n, • You will disassemble, clean, and replace visually found defective parts, reassemble, check for more faulty components, replaces the same, align, calibrate and check out equipment using known standards and test equipment.\n, • You will oversee adjustments and repairs to maintain operation of electrical equipment, cause of malfunction or defects and repairs or replaces worn, damaged, or defective parts.\n, • You will assure that all work assignments of the groups are carried out on any of the three shifts as assigned.\n, • You will pass instructions received from supervisors and provide overview of tasks to be performed to other workers.\n, • You will keep supervisor apprised of potential problems, controversial issues, and recommend corrective actions.\n, • You will inspect completed and in process work for quality of workmanship and adhere to requirements, specifications, standards, plans and schedules.\n, • You will perform research to continually improve trade processes and keep shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.\n, • You will ensure plans, blueprints, materials, and tools are available for specific jobs.\n, • You will mentor, train and instruct trade employees in a wide range of electrical equipment.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position may require work onboard ships, the ability to climb vertical ladders and work in awkward positions and confined spaces\n, • This position require may selectee to be willing and able to lift and/or carry loads/items up to 40 pounds in weight.\n, • The incumbent of this position must obtain, maintain and use a government travel card.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

The Marine Electrician-Level IV Technician will provide troubleshooting, maintenance, repair and material assessment of various types of boat electrical systems and components in accordance with Navy guidance and OEM technical specifications in CONUS & OCONUS locations, as required. ROLES AND RESPONSIBILITIES: • Uses technical knowledge and experience to troubleshoot and identify causes for equipment/system failure to the component level., • Ability to perform services in accordance with applicable OEM tech manuals., • Maintain and repair boat electrical systems and communications equipment to include but not limited to:, • Running lights, • Battery system, • GENTEX communication boxes, • UHF and VHF tactical communications equipment, • Satellite communications (SATCOM), • 110A Alternators, • Battery Isolators, • Furuno radar displays and radome, • VIC 3 and VIC 5 Communications systems, • H.S. Diploma or equivalent., • Minimum of 5 years' general experience in their respective trade and at least 3 consecutive years of experience repairing and troubleshooting the aforementioned boat electrical systems and communication equipment., • Familiarity with Navy Boat Information Book (BIB) and drawings., • Comprehension & application of technical documentation - Manuals & drawings., • Knowledge of proper use of diagnostic equipment., • Possess basic computer skills with working knowledge of Microsoft Outlook, Word and Excel., • Possess organizational skills., • Possess effective oral and written communication., • Must be able to lift, carry and transport heavy equipment and boxes up to 50 lbs., • Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc.)., • Ability to be able to work in maintenance shop environment, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions., • Possess or ability to obtain and maintain a secret clearance, • Travel requirement less than 25%, • Ability to travel overseas when required Please note: The annualized pay range referenced is a general guideline. Solvere Technical considers factors such as (but not limited to) the following when determining base pay: scope and responsibilities of the position, candidate's related work experience, education/training/certifications, key skills, internal peer equity/external market competitiveness, as well as other business considerations. BENEFITS Solvere offers a comprehensive and generous benefits package. The Solvere benefits package includes medical, dental, and vision insurance for the employee and/or families. Solvere also includes basic life insurance plus short- and long-term disability for the employee. Employees may elect to enroll in our company's 401k plan. Employees will also accrue paid time off and holidays. Additional voluntary options include supplemental insurance plans. About the Company Visit: Solvere Technical Group is committed to non-discrimination and equal employment opportunity. All qualified applicants will receive consideration for employment without discrimination based on disability, protected veteran status or any other characteristics protected by law.

Amee Bay, LLC a subsidiary of Three Saints Bay, LLC and a Federal Government Contractor industry leader, is seeking an Apprentice Electrician to join our Team in San Diego, CA. Qualified Candidates will be able to: \n • Work closely with Senior Electricians to develop or improve current knowledge of various shipboard electrical tasks.\n, • Learn how to read electrical drawing/diagrams.\n, • Develop key skills to execute clean and efficient wiring in cabinets.\n, • Learn to properly route cables throughout cableways.\n, • Transport materials, tools, and equipment to and within work sites as required.\n, • Inventory received material.\n, • Help maintain a clean worksite.\n, • Assist senior technicians with drilling, cutting, and modifying various shipboard items.\n, • US Citizenship.\n, • Must meet requirements to obtain a Federal Secret Clearance.\n, • High School Diploma or equivalent.\n, • Minimum of one (1) year of marine/maritime related experience.\n, • Ability to perform general maintenance tasks.\n, • Ability to follow written and verbal instructions.\n, • Knowledge of relevant tools and equipment.\n, • Ability to work aboard ships which includes frequent climbing, bending, and working in confined spaces.\n, • Must have a Valid U.S. Driver's License.\n, • Must pass drug screening as a condition of employment.\n\n This position is located in San Diego, CA. The hourly wage for this position is $18.00 to $22.00, based on experience. To apply: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

Career Area: Operations Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. • Set up and operate any CNC / Manual machine tool to perform any operation within its capacity where special fixtures and holding devices are furnished or not required. Perform complete and independent setup of various machine tools and perform any operation within the machine's capacity, working from 0.I.S., prints, tapes, sketches, oral and written instructions to determine the sequence of operations to be performed, dimensions and tolerances to be held, tools to use, method of locating, aligning, and holding work, and feeds and speeds. Make machine adjustments for efficient machining operations. Use precision measuring instruments, machines and gauges to check own work for conformance to specifications. As required, pre-set and/or sharpen cutting tools.\n, • Recognize improper machine functions and take corrective action and provide information to resolve discrepancies. Deburr and break edges of own machine parts. Maintain identification of machined parts as required. Replenish coolant, change accessible filters and lubricate own machine tool as required. Remove way covers, check and report damage.\n, • This position frequently interfaces with engine mechanics, production schedulers, manufacturing engineers, and third-party customer witnesses.\n\n Minimum Qualifications : \n • Minimum 1 year of experience\n, • Experience interpreting OIS Instruction sheets\n, • Ability to perform complete set up of machine\n, • Experience with Shop Floor Information System (access and interpret SFIS instruction) or equivalent shop floor data collection program\n, • Experience with Dimension and Tolerances, tools used for locating aligning and holding work\n, • Ability to make maintenance adjustments for efficient machine operations\n, • Ability to work from blueprints\n\n Payroll transfer is not available for this position. Working with minimal supervision, Industrial Electronic Electricians work on the electrical and electronic controls of manufacturing machine tools and related manufacturing equipment. Employees in this position: \n • Install, maintain, test, troubleshoot and repair electrical and electronic systems, controls, and components of manufacturing machine tools and production equipment.\n, • Use knowledge, manuals, schematic diagrams, blueprints, sketches, electrical codes and other specifications to perform work. However, they may work without instructions or documentation. Employees may design circuitry to modify control designs to repair or improve electronic controls and control systems. Employees may produce schematics, sketches or other documentation to record accomplished work.\n, • May repair or modify printed circuit cards.\n, • May program computer controls for production equipment and machine tools. This function does not include writing numerical control programs that operate machine tools or create tool paths to manufacture products.\n, • Will perform the functions of the Industrial Maintenance Electrician to include but not limited to: electrical infrastructure installations, lighting repair and replacement, knowledge of the NEC and California Electric Code, and electrical motor repair and replacement.\n, • May communicate directly with manufacturer's technical or engineering support to resolve machine tool or other production equipment problems.\n, • Employees must have the skills and knowledge to perform work in a safe manner in compliance with published codes, manufacturer's recommendations, and all Solar Turbines safety procedures.\n, • Will use hand tools, power tools, electrical and electronic test equipment.\n, • May perform additional task a directed by supervision.\n\n Minimum Qualifications : \n • Experience with electrical and electronic trouble shooting, installation, and repair.\n, • Knowledge of motor controls, ladder logic, and PLC's.\n, • The ability to run conduit of all sizes\n, • Ability to work at heights, operate forklifts, man lifts, and scissor lifts.\n, • Basic computer skills\n\n Preferred Qualifications : \n • Recognized apprenticeship\n, • Technical college or trade school\n, • Military electrical or electronic training\n, • Machine Tool Repair/calibration experience\n, • Experience with Horizontal Mill\n, • CNC Grinding Experience\n\n Minimum Education Level : High School Diploma Minimum Years of Experience : 3 to 5 Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at . Summary Pay Range: $23.00 - $40.92 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. \n • Medical, dental, and vision benefits*\n, • Paid time off plan (Vacation, Holidays, Volunteer, etc.)*\n, • 401(k) savings plans*\n, • Health Savings Account (HSA)*\n, • Flexible Spending Accounts (FSAs)*\n, • Health Lifestyle Programs*\n, • Employee Assistance Program*\n, • Voluntary Benefits and Employee Discounts*\n, • Career Development*\n, • Incentive bonus*\n, • Disability benefits\n, • Life Insurance\n, • Parental leave\n, • Adoption benefits\n, • Tuition Reimbursement\n\n, • These benefits also apply to part-time employees Posting Dates: Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Summary You will serve as a ELECTRICIAN LEADER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will determine placement of electrical distribution panels and other equipment.\n, • You will install, maintain, troubleshoot, or repair electrical equipment, systems, generators, switchboards, or control equipment in a shipyard environment.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will use theoretical practices of the trade to repair faulty electrical equipment or systems on nuclear ships.\n, • You will operate power tools (e.g., pipe benders, cutters, power drills) to cut, bend, fit, and thread components of electrical equipment and systems.\n, • You will use hand tools and test equipment to check alignment, output, or resistance to ground and other electrical characteristics.\n, • You will diagnose faulty electrical equipment or systems to determine rework or replacement of faulty components on nuclear ships alterations and repairs.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • This position may require exposure to high noise levels.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

The Marine Electrician-Level IV Technician will provide troubleshooting, maintenance, repair and material assessment of various types of boat electrical systems and components in accordance with Navy guidance and OEM technical specifications in CONUS & OCONUS locations, as required. ROLES AND RESPONSIBILITIES: • Uses technical knowledge and experience to troubleshoot and identify causes for equipment/system failure to the component level., • Ability to perform services in accordance with applicable OEM tech manuals., • Maintain and repair boat electrical systems and communications equipment to include but not limited to:, • Running lights, • Battery system, • GENTEX communication boxes, • UHF and VHF tactical communications equipment, • Satellite communications (SATCOM), • 110A Alternators, • Battery Isolators, • Furuno radar displays and radome, • VIC 3 and VIC 5 Communications systems, • H.S. Diploma or equivalent., • Minimum of 5 years' general experience in their respective trade and at least 3 consecutive years of experience repairing and troubleshooting the aforementioned boat electrical systems and communication equipment., • Familiarity with Navy Boat Information Book (BIB) and drawings., • Comprehension & application of technical documentation - Manuals & drawings., • Knowledge of proper use of diagnostic equipment., • Possess basic computer skills with working knowledge of Microsoft Outlook, Word and Excel., • Possess organizational skills., • Possess effective oral and written communication., • Must be able to lift, carry and transport heavy equipment and boxes up to 50 lbs., • Ability to work in a field environment for extended periods (and in some cases, areas of extreme heat and humidity such as Guam, Djibouti, Bahrain, etc.)., • Ability to be able to work in maintenance shop environment, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions., • Possess or ability to obtain and maintain a secret clearance, • Travel requirement less than 25%, • Ability to travel overseas when required Please note: The annualized pay range referenced is a general guideline. Solvere Technical considers factors such as (but not limited to) the following when determining base pay: scope and responsibilities of the position, candidate's related work experience, education/training/certifications, key skills, internal peer equity/external market competitiveness, as well as other business considerations. BENEFITS Solvere offers a comprehensive and generous benefits package. The Solvere benefits package includes medical, dental, and vision insurance for the employee and/or families. Solvere also includes basic life insurance plus short- and long-term disability for the employee. Employees may elect to enroll in our company's 401k plan. Employees will also accrue paid time off and holidays. Additional voluntary options include supplemental insurance plans. About the Company Visit: Solvere Technical Group is committed to non-discrimination and equal employment opportunity. All qualified applicants will receive consideration for employment without discrimination based on disability, protected veteran status or any other characteristics protected by law.

Company Overview At General Dynamics Ordnance and Tactical Systems, our employees are the heart of our company. We invite you to apply to join our team of employees who are dedicated to excellence that meet the needs of the warfighters and our customers around the world, day in and day out. Job Summary The Electro-Mechanical Technician is responsible for a range of tasks related to systems integration equipment and process operations that require technical expertise. This role includes testing, assembling, and evaluating various types of AC and DC components. Candidates must possess knowledge and experience in utilizing electronic and mechanical equipment, such as multimeters, power supplies, oscilloscopes, and calipers, as well as a solid understanding of AC and DC theory. Impact of the Role General Profile \n • Acquires basic skills to perform routine tasks\n, • Develops understanding in an analytical or scientific method or operational process\n, • Works with close supervision\n, • Performs manual tasks according to established procedures\n Essential Functions \n • Assists with inspecting, repairing, installing, and maintaining electrical systems, machinery, and equipment.\n, • Ensures all work performed meets required safety codes and is properly inspected.\n, • Uses a variety of tools and equipment, such as power construction equipment, measuring devices, power tools, and testing equipment.\n, • Supports with testing electrical systems to ensure proper installation and operation.\n, • Inspects electrical systems to determine whether repairs are needed.\n, • Assists with replacing conduit, wiring and circuit breakers as needed.\n Required Qualifications • \nRequired education and experience: Attending a Vocational / Technical School or internal training program OR Equivalent Combination of Relevant Education & Experience or Skillset; No prior experience needed Preferred Qualifications \n • \nPreferred education and experience: Vocational/Technical Training Degree\n, • \nDiscipline/Major: Technical training preferred\n, • \nAdditional certifications: Typically requires an Electrician's license granted by state\n, • \nKnowledge, skills & abilities: Electrical Wiring Installation. Install Electrical Services. Reading Blueprints/Diagrams. Safety Inspections. Troubleshooting Electrical Codes.\n Physical Requirements \n • Requires regular movement throughout GD-OTS facilities.\n, • Must be able to lift up to 45 pounds.\n, • May need to stand for long periods of time.\n, • Work may require employee to work inside and outside with exposure to changing climate and/or operate machinery.\n, • May be requested to work a different shift.\n, • Must be willing to work outside normal business hours as required\n, • This position is Safety-Sensitive.\n Travel Requirements No or very little travel likely. Pay Range (USD) $42,243.00 - $57,153.00 Pay Transparency Statement The salary range displayed reflects the minimum and maximum for salary for this position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, internal equity, and relevant education or training. Your recruiter can share more about the range during the hiring process. Additional Compensation Hired applicant may be eligible to participate in the Company's Gain Sharing Program. Benefits Employees are eligible for medical, dental, vision, short and long-term disability, and basic life insurance as well as pre-tax spending accounts. Employees are also able to enroll in the company's 401k plan and are eligible for the Non-Contributory Retirement Contribution. In addition to the benefits discussed above, the company offers the following voluntary benefits: Critical Illness Insurance, Accident Insurance, Identify Theft Protection, Enhanced Legal Services, Auto and Home Insurance, Pet Insurance, Commuter Benefits, Hospital Indemnity Insurance, Educational Assistance. PTO, Holiday, and Family Leave Employees will receive 11 paid holidays and 120 hours of PTO annually and up to 3 weeks paid family leave. The above statements describe the general nature and level of work only. The statements do not represent an exhaustive list of required responsibilities and skills. Other duties may be added or this job description may be amended at any time. This job description does not alter an employee's at-will employment status or create an employment agreement or contract, implied or otherwise.

Three Saints Bay, LLC and a Federal Government Contractor industry leader, is seeking an.Qualified Candidates will be able to:.Work closely with Senior Electricians to develop or improve current knowledge of various shipboard electrical tasks.Learn how to read electrical drawing/diagrams.Develop key

Typically requires an Electrician's license granted by state.

Three Saints Bay, LLC, and a Federal Government Contractor industry leader, is seeking an.Electrician Foreman supervises and/or accomplishes manufacture, troubleshooting, repair, and installation of electrical and electronic equipment.The employee will perform a wide variety of different tasks depen

Work closely with Senior Electricians to develop or improve current knowledge of various shipboard electrical tasks.

The Marine Electrician-Level IV Technician will provide troubleshooting, maintenance, repair and material assessment of various types of boat electrical systems and components in accordance with Navy guidance and OEM technical specifications in CONUS & OCONUS locations, as required.

Epsilon Systems is seeking a Temporary Electrician II for National City, CA. Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments. At least 5 years' experience as a marine electrici

Full-Time Electrician II in National City, CA. Adjusts, repairs, or replaces defective wiring and relays in ignition, lighting, air-conditioning, and safety control systems, using electrician's tools. Minimum of three years' experience as an electrician in the ship repair industry.

San Diego, CA shipyard related subcontractor looking to hire an Electrician. Job Summary: An Electrician will focus on providing engineering support to all departments as needed.

You will serve as an Expert Electrician leading a group to ensure work assignments are completed.

Full-Time Electrician II in National City, CA. Adjusts, repairs, or replaces defective wiring and relays in ignition, lighting, air-conditioning, and safety control systems, using electrician's tools. Minimum of three years' experience as an electrician in the ship repair industry.