Environmental safety jobs in Los Angeles, California - Page 4Create job alerts

Job Description Hotel Equities, a multi-award-winning hotel development and hospitality management company, is currently searching for a remarkable Line Cook for the Le Parc at Melrose in West Hollywood, CA. Job Purpose: Prepare food items in accordance with production requirements and quality standards while maintaining a safe sanitary work environment. Warm, knowledgeable service and helpful guidance reassure guests they’ve made the right choice to stay with us. • Prepare all food items according to standard recipes and as specified on guest check and, • following company and brand standards, to ensure consistency of product and achieve high, • guest satisfaction., • Prepare daily requisitions for supplies and food items for production., • Visually inspect, select, and use only food items of the highest standard in the preparation, • of all menu items., • Check and control the proper storage of product and check portion control, to maintain, • qualify product., • Keep all refrigeration, equipment, and storage and working areas in clean, working condition, • in order to comply with health department regulations., • Good working knowledge of accepted standards of sanitation., • Knowledge of operating all kitchen equipment (stoves, ovens, broilers, slicers, steamers, kettles, etc.), • Must have knowledge of food and beverage preparation and service., • Promptly report all maintenance issues, • Properly receive and store food and other deliveries, • Consult with upper kitchen management on a daily basis as well as with other departments that, • are directly related to the Food & Beverage Department., • Participate in long range planning., • Participate, support and make recommendations for ongoing hotel programs with continues, • improvement in networking., • Participate in physical inventories, •  Guest Relations, • Be readily available/ approachable for all guests., • Take proactive approaches when dealing with guest concerns. Follow property specific, • second effort and recovery plan., • Extend professionalism and courtesy to guests at all times., • Adhere to all applicable Company Standard Operating Procedures., • Be an enthusiastic, helpful and positive member of the team, • Be professional, responsible and mature in conduct and behavior, • Be understanding of, encouraging to and friendly with all co-workers, • Be self-motivated and use time wisely, • Maintain open line of communications with each department, • Communicate pertinent information, • Respond positively to new ideas, • Openly accept critical/developmental feedback, • Maintain effective communication through the use of meetings, memorandums, • Be available to help other departments in emergency situations, • Perform other assignments as directed by supervisor., • Adhere to all work rules, procedures and policies established by the company including, but not limited to those contained in the associate handbook., • Safety and Security Skills, • Properly handle and account for keys High School diploma /Secondary qualification or equivalent. At least two years of food preparation experience in the hospitality industry This job requires the ability to perform the following: • Must be able to speak, read, write and understand the primary language(s) used in the workplace., • Must be able to read and write to facilitate the communication process., • Requires good communication skills, both verbal and written., • Must possess basic computational ability., • Ability to read recipes and follow their instructions., • Ability to physically self-demonstrate culinary techniques, i.e., cutting, cooking principles, plate presentation, safety and sanitation practices., • Ability to create appropriate buffet displays up to 5-6 feet in height and the ability to set up, maintain and breakdown same., • Most work tasks are performed indoors. Temperature is moderate and controlled by hotel, • environmental systems; however, must be able to work in extreme temperatures like freezers (-10 degrees F) and kitchens (+110 degrees F), possible for one hour or more., • Must be able to stand and exert well-paced mobility for up to 4 hours in length., • Ability to physically handle knives, pots, mirrors, or other display items as well as grasp, lift and carry same from shelves and otherwise transport up to 50 pounds to every area of the kitchen. Ability to perform cutting skills on work surfaces, topped with cutting boards, 3 to 4 feet in height (banquet kitchen, prep kitchen, bake shop, etc.). Proper usage and handling of various kitchen machinery to include slickers, buffalo chopper, grinders, mixers, and other kitchen related equipment., • Ability to create, builds, handle, and dismantle displays up to 8 feet high, including ice carvings., • The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level., • Must be able to exert well-paced ability in a limited space and to reach other locations of the hotel on a timely basis., • Must be able to bend, stoop, squat and lift up to 50 lbs. on a regular and continuing basis; must be able to stretch to fulfill cleaning/inspection tasks., • Must be able to exert well-paced ability to maneuver between functions occurring simultaneously., • Must be able to lift trays of food or food items weighing p to 30 lbs. on a regular and continuing basis., • Must be able to push and pull carts and equipment weighing up to 250 lbs. regularly., • Requires grasping, writing, standing, sitting, walking, repetitive motions, bending, climbing,, • listening and hearing ability and visual acuity., • Talking and hearing occur continuously in the process of communicating with guests, supervisors and co-workers., • Vision occurs continuously with the most common visual functions being those of near vision and depth perception., • Requires manual dexterity to use and operate all necessary equipment., • Requires finger dexterity to be able to operate office equipment., • Being passionate about people and service., • Strong communication skills are essential when interacting with guests and employees., • Reading and writing abilities are used often when completing paperwork, logging issues/complaints/requests/ information updates, etc., • Basic math skills are used frequently when handling cash or credit., • Problem-solving, reasoning, motivating, and training abilities are often used., • Team Driven and Values Based Culture, • Medical/Dental/Vision, • Vacation & Holiday Pay, • Same-day pay available, • Employee Assistance Program, • Career Growth Opportunities/ Manager Training Program, • Reduced Room Rates throughout the portfolio, • Third Party Perks (Movie Tickets, Attractions, Other), • 401(k), • Employee assistance program, • Employee discount, • Flexible schedule, • Flexible spending account, • Life insurance, • Parental leave, • Referral program

Servicon Systems, Inc. EEO Statement: Equal Employment Opportunity/M/F/disability/protected veteran status Servicon Systems is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Housekeeper II US-CA-Los Angeles Job ID: 2026-7172 Type: Full-Time of Openings: 5 Category: Janitorial/Custodial LA General Who We Are We are a family and women-owned local company with over 50 years of experience in environmental solutions, specializing in infection prevention for complex facilities. Our responsiveness allows us to quickly meet staff and client needs. Servicon’s Culture of Caring drives our commitment to healthy environments, supported by three pillars: People, Programs, and Performance. These focus areas reinforce our values and help improve people's lives, patient care, infection prevention, and operational efficiency. The Role Now Hiring: EVS Housekeepers (Environmental Services) High-Volume Trauma Hospital | Los Angeles Area. 2nd Shift: 3:00 PM – 11:30 PM Pay: $24.75/hour Schedule: Must be available to work weekends and holidays Are you ready to make a real impact where it matters most? Join our fast-paced Environmental Services team at one of Los Angeles’ busiest trauma hospitals. This is more than a cleaning role—it’s a frontline position in patient safety and care. WHAT YOU WILL DO • Clean and disinfect patient rooms according to hospital standards, • Maintain strict infection control procedures, • Support a safe, sanitary environment for patients, staff, and visitors, • Work efficiently in a high-volume, fast-paced setting, • Demonstrate a complete knowledge of infection control, isolation procedures and proper operation of cleaning equipment while sanitizing patient, operating, Inpatient Tower or emergency room., • Perform terminal cleanings to include but not limited to, Covid, Monkey Pox, TB, lice, maggots, mites, worms, or bodily fluids, • Perform pressure washing in outpatient departments and/or operating rooms, • Must be fluent in English language, • 1+ years of custodial experience a plus, • 1 + year experience working in emergency rooms, operating rooms, etc., • Ability to handle under pressure emergencies, • Knowledgeable in disposal of biohazard waste/material Why You Will Love It Here • A friendly, respectful, energetic corporate culture that will allow you to thrive, • Work in an environment where you can see the difference you make daily!, • Employee Assistance Program (EAP), • Competitive base salary, • Safe harbor 401(k) with company matching (if applicable) Compensation details: 24.75-24.75 Hourly Wage PIa0cd2373d61c-37820-40427356

Job Description The role… At Soho House, a Line Cook II is responsible for maintaining a station or two, seamless preparation of food and sauces, and assisting Senior Chefs with service. As Line Cook II, you thrive in fast-paced environments and positively influence the team by demonstrating highly skilled abilities of two stations and remaining calm during a busy service. A successful Line Cook II is a critical member of the team due to the focused and appreciated culinary abilities in two or more stations. Although not skilled in all stations, a Line Cook II is hyper-specialized and has a proven ability to execute all menu items properly from prep to plate and deliver top-quality dishes from two or more stations. Main Duties • Responsible for learning ingredients on all menu items and able to produce consistent and quality dishes in fast-paced and demanding environments and on two stations., • Daily support in prep as well as kitchen maintenance, equipment, and inventory when needed., • Daily responsibilities also include preparing food items in the pantry, fry station, and other kitchen areas while adhering to allergy requests and specific dish alterations., • Prepares all food items as directed in a sanitary and timely manner. In addition, be able to comply with safety, sanitation and food handling procedures., • Follows recipes, portion controls, and presentation specifications as set by the Kitchen while paying attention to cooking temps and quality to reduce additional costs., • Assist with inventory to support the kitchen operating at a sustainable food cost., • Sets up stations according to Kitchen guidelines, and maintains a safe, clean, organized, and stocked work area., • Production and a-la-carte dish(s) execution. Including weekend feast ideas and team meals., • Work towards specific goals and Soho House Standards for speed of service goals and consistent experience for Soho House Standards for service; 3-8-10, • Ensure proper time and attendance procedure is followed when clocking in and out for shifts and breaks., • Support Executive Sous and Jr. Sous with pre and post-service meeting when requested., • Positive influence for teams under pressure and provide a welcoming work environment that increases staff morale., • Attend "Cook House" trainings and support the mentoring and education of new and existing team members on areas they are looking to go., • Assists with the cleaning, sanitation, and organization of kitchen, walk-in coolers, and all storage areas., • Minimum of 2+ years' experience in a fast-paced, upscale and approachable environment of professionals, • Strong understanding of professional cooking and encompasses educated knife-handling skills., • Food handler's certificate, • Strong communicator, able to take direction, team player mentality., • Proactive ability to build professional relationships with all leaders and kitchen team., • Flexible schedule and ability to work morning, night, weekend and holiday's (as needed), • Must be able to seize, grasp, turn, and hold objects with hands., • Must be able to work on your feet for at least 8-10 hours., • Fast-paced movements are required to go from one part of the kitchen and storage areas to others., • Must be able to move, pull, carry, or lift up to 50 pounds on occasion and 35 pounds regularly., • Occasional environmental exposures to cold, heat, and water Soho House offers competitive compensation packages that feature global benefits and perks. Whether you're seeking entry-level employment or a new opportunity to expand your profession, we offer training to develop the technical and managerial skills necessary to enhance your career. • Health Care + 401K: Full-time employees are eligible for full benefits; Medical, Dental, and Vision as well as a Retirement fund with a 2% match., • Paid Time Off: Full- Time Employees have sick days + vacation days., • Career Development: Soho House can progress your career domestically or internationally as well as managerially or technically., • Soho Impact: Empowering the Soho House Community to make positive change, through mentoring, apprenticeship, local outreach, and sustainability., • Learning & Development: An extensive range of internally and externally run courses are available for all employees., • Cookhouse & House Tonic: Celebrating our passion for food and drink. Check out our monthly calendars and get involved in trips, trainings and events. Available to all., • Team Events: From fitness sessions to cinema screenings and art classes, each month, we hold a series of fun events which you can sign up for., • Team Meal: While on duty in our Houses and restaurants you will be provided with a substantial meal free of charge.In accordance with California law, the salary range for this role if filled within California is listed below. The range for the position in other geographies may vary based on market differences. The actual compensation will be determined based on experience and other factors permitted by law.Pay Range$25—$25 USD

Job Description The role… At Soho House, a Line Cook III is responsible for contributing to service and supporting a dedicated section, seamless preparation of food and sauces, and assisting Senior Chefs when needed. As a Line Cook III, you thrive in fast-paced environments and positively influence the team by demonstrating skilled abilities of one or more stations and remaining calm during a busy service. A successful Line Cook III is a critical member of the team due to the focused and appreciated culinary abilities in one or more stations. Although not skilled in all stations, a Line Cook III is hyper-specialized and has a proven ability to execute all menu items properly from prep to plate and deliver top-quality dishes from two or more stations. Main Duties • Responsible for learning all menu items and ability to produce consistent and quality dishes in fast-paced and demanding environments on one or more stations., • Daily support in prep as well as kitchen maintenance, equipment, and inventory when needed., • Daily responsibilities also include preparing food items while adhering to allergy requests and specific dish alterations., • Prepares all food items as directed in a sanitary and timely manner. In addition, be able to comply with safety, sanitation and food handling procedures., • Follows recipes, portion controls, and presentation specifications as set by the Kitchen while paying attention to cooking temps, wastage, and quality to reduce additional costs., • Sets up station according to Kitchen guidelines and maintains a safe, clean, organized, and stocked work area., • Production and a-la-carte dish(s) execution. Including weekend feast ideas and team meals., • Work towards specific goals and Soho House Standards for speed of service goals and consistent experience for Soho House Standards for service; 3-8-10, • Ensure proper time and attendance procedure is followed when clocking in and out for shifts and breaks., • Support Executive Sous and Jr. Sous with pre and post-service meeting when requested., • as well as restocks all items as needed throughout the shift., • Maintain a positive energy and remain influential to other team members while working under pressure and provide a welcoming work environment that increases staff morale., • Attend "Cook House" trainings and support the mentoring and education of new and existing team members on areas they are looking to go., • Assists with the cleaning, sanitation, and organization of the kitchen, walk-in coolers, and all storage areas., • Minimum of 1+ years' experience in a fast-paced, upscale, and approachable environment of professionals, • Understanding of professional cooking and encompasses educated knife handling skills., • Food handler's certificate, • Strong communicator, able to take direction, and has a team player mentality., • Proactive ability to build professional relationships with all leaders and kitchen team., • Flexible schedule and ability to work morning, night, weekend, and holidays (as needed), • Must be able to seize, grasp, turn, and hold objects with hands., • Must be able to work on your feet for at least 8-10 hours., • Fast-paced movements are required to go from one part of the kitchen and storage areas to others., • Must be able to move, pull, carry, or lift up to 50 pounds on occasion and 35 pounds regularly., • Occasional environmental exposures to cold, heat, and water Soho House offers competitive compensation packages that feature global benefits and perks. Whether you're seeking entry-level employment or a new opportunity to expand your profession, we offer training to develop the technical and managerial skills necessary to enhance your career. • Health Care + 401K: Full-time employees are eligible for full benefits; Medical, Dental, and Vision as well as a Retirement fund with a 2% match., • Paid Time Off: Full- Time Employees have sick days + vacation days., • Career Development: Soho House can progress your career domestically or internationally as well as managerially or technically., • Soho Impact: Empowering the Soho House Community to make positive change, through mentoring, apprenticeship, local outreach, and sustainability., • Learning & Development: An extensive range of internally and externally run courses are available for all employees., • Cookhouse & House Tonic: Celebrating our passion for food and drink. Check out our monthly calendars and get involved in trips, trainings and events. Available to all., • Team Events: From fitness sessions to cinema screenings and art classes, each month, we hold a series of fun events which you can sign up for., • Team Meal: While on duty in our Houses and restaurants you will be provided with a substantial meal free of charge.In accordance with California law, the salary range for this role if filled within California is listed below. The range for the position in other geographies may vary based on market differences. The actual compensation will be determined based on experience and other factors permitted by law.Pay Range$24—$25 USD

Job Description Hope Mission Statement The mission of Hope the Mission is to prevent, reduce and eliminate poverty, hunger, and homelessness by offering immediate assistance and long-term solutions. Position Purpose and Summary: Event Cook I The Event Cook I is responsible for preparing food for events in a high-volume, fast-paced environment in accordance with established recipes, quality standards, and food safety requirements. This role focuses on accurate execution of assigned tasks while maintaining sanitation and organizational standards. The Event Cook I works collaboratively with culinary staff, volunteers, and production teams to support on-site and off-site events, including both upscale and casual service, and performs duties under the direction of the Event Chef de Cuisine. Event Cook II The Event Cook II performs all core food preparation duties while assuming an increased level of responsibility for event execution and operational support. This role serves as a working lead during events by coordinating workflow, providing guidance to Event Cook I staff and volunteers, and supporting quality control and service standards. The Event Cook II assists with training, problem-solving, and execution of complex or high-volume events and may take on additional responsibilities for off-site events and special projects under the direction of the Event Chef de Cuisine. Responsibilities: ● Quality Control: Ensures that every dish is to the standard of the Event Chef de Cuisine for quality an taste. ○ Monitors consistency and presentation of food items, making adjustments as necessary. ● Kitchen Efficiency and Organization: Maintains an organized and efficient workflow in the kitchen. Manages the setup and upkeep of workstations, ensuring all necessary ingredients and tools are readily available. ● Training and Supervision: Assists in training new kitchen staff. Provides guidance and mentorship to less experienced cooks and prep cooks, ensuring the team maintains high culinary standards. ● Inventory Management: FiFO procedures, restocks inventory, notifies chef-in-charge of any low stock levels. Helps put away daily deliveries. ● Health and Safety Compliance: Adheres to and enforces strict health and safety standards. Ensures the kitchen meets all regulatory requirements. ● Equipment Maintenance: Responsible for the proper use and maintenance of kitchen equipment, reporting any malfunctions or safety hazards. ● Collaboration and Communication: Works closely with other cooks, Food Services team members and the Chef de Cuisine to ensure a harmonious kitchen operation. Effective communication skills are essential. ● Create sauces, marinades, bases and mixes in accordance with company recipes, techniques and standards ● Cook stocks & broths in accordance with company recipes ● Maintain a clean and sanitary workstation during all working hours. ● Maintain and organize kitchen equipment, tools and utensils ensuring they are clean and in good working condition. ● Organize and clean all kitchen areas including dry storage, refrigeration, freezer storage, dish washing area. ● Diligently label speedracks, containers, and products specifically for event use in shared cold storage. ● Apportion and serve food to facility residents, employees, or patrons. Required Skills & Core Competencies: ● Advanced Food Preparation: Skilled in preparing a wide range of dishes and ingredients with proficiency. This includes experience in handling different types of meats, seafood, vegetables, and other ingredients, as well as knowledge of various cooking techniques. ● Able to operate, maintain and clean all kitchen equipment including scales, ovens, stove tops, braising pan, steam kettle, fryer, grill, flat top. ● Ability to read and follow recipes, familiarity with both weight and volumetric measurements ● Ability to work calmly and effectively under pressure ● Ability to take directions from the Sous Chefs, Event Chef de Cuisine and Executive Chef ● Be a team player and have a great positive attitude. ● Have excellent organizational skills and time management skills; be able to function under time constraints and deadlines with attention to detail ● Must be able to multitask and prioritize daily tasks list ● To ensure a functional and hygienic environment, inspect and clean all equipment, kitchen appliances, and work areas ● Advanced understanding of knife handling and kitchen safety ● Ability to frequently work with volunteers and represent the organization and its mission to patrons and members of the public. ● Ability and willingness to take lead on event and volunteer session execution when the Event CDC and Sous are engaged in other commitments ● Competence with recipe development, use of all volumetric and weight measurements, and recipe scaling. ● Flexibility and willingness to assist with daily production duties as needed or when event prep has been completed ● Plating dishes buffet, family, and/or individual style with sense of urgency and finesse ● Assist with staff meal as needed ● Assist with cooking food according to menus, special dietary or nutritional restrictions, or numbers of portions to be served ● Assist with dish team as needed ● Assist other Food Services team members as needed ● Follow strict food safety regulations to maintain a safe environment for all. ● Perform any other tasks assigned with a positive attitude and a willingness to help. Qualifications Event Cook I ● Experience: 4+ years of culinary experience; 3+ years Line Cook experience in a professional kitchen; high volume production preferred. Experience in busy, fast-paced environments is welcome. Event Cook II ● Experience: 5+ years of culinary experience; 4+ years Line Cook experience in a professional kitchen; high volume production preferred. Experience in busy, fast-paced environments is welcome. Event Cook I & II ● Commitment to serving the needs of homeless families and individuals ● Food handler certification ● Culinary degree preferred ● High school diploma or GED preferred ● FLSA Status: Non-Exempt ● Drug and TB testing required. Background check required ● Job Type: Full-time Mandatory Requirements: ● Must be able to work in a standing position for extended periods of time ● Must be able to carry, lift, push, and pull up to 50lbs ● Must be able to regularly bend and stoop ● Must be able to work weekends and holidays ● Must follow strict requirements about food safety Physical, Demands, Environmental Conditions, Equipment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employee is required to: Routinely required to sit; walk; climb stairs; engage in verbal, written, and email communication; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the Administration office. Can observe and respond to people and situations and interact with others encountered in the course of work. Handle, fingers, grasp and feel objects and equipment; Reach with hands and arms; Communicate, receive and exchange ideas, information by means of the spoken and written word; Be mobile by moving oneself from place to place quickly and easily; Repeat various motions with the wrists, hands, and fingers; Be able to have visual activity for (including, but not limited to) administrative and clerical tasks; Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Drive vehicle in and around Los Angeles County, as needed; be able to enter buildings that may require climbing stairs. Be periodically subjected to outside environmental conditions. Use a desktop and/or laptop computer, copy, postage, and fax machines. Complete all required forms in personal writing. Employee may work in proximity to service animals and emotional support animals. ◊ EEO: HOTV (Hope of the Valley) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, HOTV complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, placement, promotion, recall, transfer, leaves of absence, compensation and training. ◊ HOTV will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job of er is made to you. After making a conditional of er and running a background check, if HOTV is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide Tuesday - Saturday: 8:00am - 4:30pm or 11:00 am - 7:30pm

Job Description Position Summary The mission of Hope the Mission is to prevent, reduce, and eliminate poverty, hunger, and homelessness by offering immediate assistance and long-term solutions. Our mission is to meet our participants' needs through an individualized and non-judgmental approach. The Prep Cook is responsible for preparing ingredients, chopping vegetables, and assisting in meal preparation. They ensure a clean and organized workstation and kitchen, manage inventory, and may handle basic cooking tasks. Attention to detail and adherence to hygiene and safety standards are crucial in this role. Most of the work will be high volume production. This position is a part of our kitchen staff working with Line Cooks, Lead Cooks and reports to the Chef de Cuisine. Primary Duties and Responsibilities: ● Knife Skills: Possess proficient knife skills to ensure accurate and efficient food preparation ● Organization: Maintain a well-organized and clean workspace, including proper storage of ingredients and labeling ● Assisting Chefs: Support chefs and kitchen staff in various cooking tasks, ensuring timely and smooth meal preparation ● Inventory Management: Monitor and manage inventory levels, alerting the chef-in-charge when supplies are running low ● Food Safety: Adhere to strict hygiene and safety standards, including proper food handling, storage, and sanitation practices ● Equipment Handling: Operate kitchen equipment such as slicers, food processors and blenders safely and efficiently ● Recipe Adherence: Follow recipes and guidelines to maintain consistency in food quality, taste, and presentation ● Communication: Coordinate with other kitchen staff to ensure seamless workflow and timely completion of tasks ● Clean-Up Duties: Assist in post-meal service clean-up, including dishwashing when necessary ● Flexibility: Adapt to changes in menu or kitchen priorities and assist in various kitchen duties as needed ● Team Collaboration: Work collaboratively with the kitchen team to achieve overall kitchen goals and maintain a positive working environment ● Time Management: Efficiently manage time to meet food preparation deadlines and maintain a smooth kitchen operation ● Quality Control: Monitor the quality of ingredients and finished dishes, reporting any issues to the chef-in-charge ● Create sauces, marinades and mixes in accordance with company recipes, techniques and standards ● Decorating assistance: preparing icing, glazes, toppings and decorate on cakes, muffins and baked goods ● Able to operate, maintain and clean kitchen equipment including scales, ovens & stove tops ● Maintain kitchen equipment, tools and utensils ensuring they are clean and in good working condition ● Ability to read and follow recipes ● Be a team player and have a great positive attitude ● Able to effectively collaborate with team members, supervisors and other staff. ● Have excellent organizational skills and time management skills; be able to function under time constraints and deadlines with attention to detail ● Must be able to multitask and prioritize daily tasks list ● Maintain a clean and sanitary workstation ● Organize and clean all kitchen areas including dry storage, refrigeration and freezer storage ● Apportion and serve food to facility residents, employees, or patrons ● To ensure a functional and hygienic environment, inspect and clean all equipment, kitchen appliances, and work areas ● Must be able to work in a standing position for extended periods of time ● Must be able to carry, lift, push, and pull up to 50lbs ● Must be able to regularly bend and stoop ● Must be able to work weekends and holidays ● Must follow strict requirements about food safety Other Requirements: ● Assist with other teams as needed ● Assist with inventory management: restock ingredient bins and notify supervisors of any low stock items ● Assist with staff meal and special events as needed ● Assist with cooking food according to menus, special dietary or nutritional restrictions, or numbers of portions to be served ● Work with volunteers and workers who help in meal preparation and service. ● Follow strict food safety regulations to maintain a safe environment for all. ● Perform any other tasks assigned with a positive attitude and a willingness to help. Additional Qualifications and Experience: ● Experience: 2+ years of culinary experience; high volume production preferred ● Commitment to serving the needs of homeless families and individuals ● Food handler certification ● High school diploma or GED preferred ● FLSA Status: Non-Exempt ● Drug and TB testing required. Background check required ● Job Type: Full-time Physical, Demands, Environmental Conditions, Equipment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employee is required to: Routinely required to sit; walk; climb stairs; engage in verbal, written, and email communication; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretch. Occasionally required to move around the Administration office. Can observe and respond to people and situations and interact with others encountered in the course of work. Handle, fingers, grasp and feel objects and equipment; Reach with hands and arms; Communicate, receive and exchange ideas, information by means of the spoken and written word; Be mobile by moving oneself from place to place quickly and easily; Repeat various motions with the wrists, hands, and fingers; Be able to have visual activity for (including, but not limited to) administrative and clerical tasks; Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Drive vehicle in and around Los Angeles County, as needed; be able to enter buildings that may require climbing stairs. Be periodically subjected to outside environmental conditions. Use a desktop and/or laptop computer, copy, postage, and fax machines. Complete all required forms in personal writing. Employee may work in proximity to service animals and emotional support animals. ◊ EEO: HOTV (Hope of the Valley) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, HOTV complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, placement, promotion, recall, transfer, leaves of absence, compensation and training. Weekends required, AM & PM shifts available

Exciting Opportunity for Impactful Tech Work! 🚀 Are you ready to use your technical expertise to ensure the safety and quality of vital environmental systems? We are looking for a talented individual to join a dynamic team focused on a major data and application migration project! This is your chance to lead data migration efforts, mentor junior developers, and solve complex problems that truly matter. If you thrive in collaborative environments and enjoy mastering new technologies, this role is for you! Contract Details 📝 • Type: One-year renewable contract., • Estimated Hourly Rate: $43.34 - $51.34/hour., • Location: Fully Remote., • Residency Requirement: Candidates must reside in a state that aligns with Eastern or Central Time. Closing Date: January 22, 2026 Note: This role is open to direct hires only. We are not accepting Corp-to-Corp (C2C) or agency submittals. Required Skills 🛠️ • 8 years of experience working on government IT projects as a software developer or engineer., • 8 years of experience building and optimizing SQL statements and stored procedures., • 3 years of experience supporting information systems related to Water Quality or Safety., • Strong working knowledge of ASP.NET, .NET, C#, HTML, and CSS., • Bachelor’s degree in Computer Science, Computer Engineering, or a related field. Preferred Skills ✨ • Experience with Water Quality Exchange (WQX), SDWIS, SWIFT, and DW-SFTIES., • Experience utilizing Apache Tomcat and Java., • Previous collaboration or work experience with the Environmental Protection Agency (EPA)., • Proficiency with Microsoft Office products and service/help desk ticket platforms. Nice to Have Skills & Additional Duties 🌟 • Demonstrable expertise in software troubleshooting, debugging, and analysis., • Familiarity with the full Software Development Life Cycle (SDLC)., • Expertise in developing and executing software test cases., • Experience maintaining and upgrading existing software applications., • Leadership experience within technical teams., • Ability to estimate development effort for software requests., • Excellent communication skills with the ability to coordinate across project and business teams., • ICHRA, • 401k, • Competitive compensation, • Bi-weekly pay, • Direct deposit

Job Description About Norchem For over 40 years, Norchem has been at the forefront of innovation in the textile services industry-delivering advanced water, chemical, and software solutions that reduce environmental impact while maximizing performance. We're not just another industrial company-we're pioneers. From automated VFD injection technology to crossflow filtration and plant-wide data systems, Norchem has consistently introduced breakthrough technologies that reshape how facilities operate. Our culture is built on trust, ingenuity, and a drive to solve complex challenges. If you enjoy working on meaningful systems that blend electrical engineering, automation, and sustainability-you'll fit right in. The Opportunity Norchem is a C-10 Contractor looking for a hands-on Controls Technician (PLC & Panel Building) who thrives in a fast-paced, problem-solving environment. This role is ideal for someone who enjoys building, troubleshooting, and bringing automated systems to life-from the shop floor to field installations. We value a practical, no-nonsense work environment where good ideas win! You'll play a key role in assembling and maintaining the control systems that power Norchem's cutting-edge solutions. Location: Bell Gardens, CA Schedule: Monday-Friday, 6:00 AM to 2:30 PM (overtime eligible as needed). Benefits • Medical, Dental Vision and Life Insurance (94–100% of employee premiums covered on select plans), • 401(k) pre-tax/ROTH plans with Employer Safe Harbor Match, • PTO and STO, • Federal Holidays, • Company Work Uniforms, • Build and wire UL508A control panels using schematics and I/O lists, • Assemble and integrate PLCs, relays, drives, and control components, • Troubleshoot and repair industrial electrical systems (motors, VFDs, relays, PLCs), • Execute BOM, I/O, and PID specifications for electrical panel builds and installation projects., • Perform quality control tests and inspect systems for quality, safety, and code compliance, • Interpret electrical schematics, manuals, and work orders, • Collaborate with engineering and production teams to deliver high-quality automated systems, • 3–5 years of hands-on experience in electrical, automation, or electromechanical work, • Experience with control panel building and PLC/HMI-based systems is desired., • Working knowledge of UL508A standards and industrial control wiring, • Ability to read and interpret schematics, blueprints, and wiring diagrams, • Familiarity with motors, VFDs, and industrial electrical components, • Strong troubleshooting mindset and attention to detail, • Comfortable working both independently and as part of a team, • Work on innovative, real-world automation systems-not repetitive production lines, • Be part of a company focused on sustainability and industry disruption, • Gain exposure to cutting-edge technologies in water treatment and industrial automation, • Join a collaborative, tight-knit team where your ideas matter, • Opportunities to grow your technical skillset across electrical, controls, and systems integration Norchem Corp is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable.

Job Description This position contributes to the success of The Aster LA (“Company”) by maintaining the cleanliness and organization of dining items used in all outlets by keeping the dish area clean and clutter free. RESPONSIBILITIES: · Arrives to work on time in proper uniform and ready to work. · Follows proper daily dish cleaning duties as set forth in company policies · Upon arrival inspect work area for any job-related needs, such as machine chemicals, cleaning supplies, apron, gloves · Organize dish area, set up empty racks/bus tubs, refresh sanitation buckets · Properly wash, stack, and store china, glassware, silverware, cookware, and storage containers in correct racks and storage areas. · Change dishwashing machine water and sink water as required by business levels, and properly uses chemical dilutions · Assists in the timely storing and organization of food deliveries. · Maintains floors clean and dry throughout the shift · Maintains trash cans throughout shift and removes full trashcans and boxes at the end of each shift to proper location · Assists with cleaning grills, mopping floors, and other areas in the kitchen prior to ending the shift · Assists in food prep and any other duties set forth or requested by the chef as needed. · Support in other food & beverage outlets as business dictates. ENSURE A SAFE WORK ENVIRONMENT: · Comply with the Company Health and Safety (H&S) processes while working on projects, initiatives and other work-related duties; perform job duties in a way that will not cause danger to self or others, or violate local, state, federal, environmental regulations. · Promptly correct or report any hazard, potential hazard, or unsafe work condition to the Director of Facilities, and/or People & Culture; wear protective equipment when required; ensure work location is kept safe, clean, and organized. · Seek out opportunities to enhance personal skills set relevant to job tasks. · Maintain current on product knowledge, best practices, and skills needed to meet the demands of your position. EDUCATION, LICENSES, & CERTIFICATIONS: · Ideal: Minimum of one (1) years of experience in same or similar positions in the Food & Beverage industry · Required: Food Handlers Certification(s) · Ideal: High School Diploma or GED Equivalent ESSENTIAL QUALIFICATIONS: · Required: At least eighteen (18) years of age. · Required: Reliable and punctual attendance. · Required: Excellent time-management skills; prioritizing and completing assigned job tasks effectively. · Required: Read and write (English). · Ideal: Bi-lingual oral, speech, and writing skills in and additional language is an asset in this position · Required: Excellent interpersonal and customer service skills · Ideal: Excellent verbal and written communication skills; ability to convey messages clearly and compose correspondence with correct and proper grammar. · Ideal: Strong presentation skills; convey messages clearly and confidently; persuade and effect change positively. · Required: Capable of working effectively independently with minimal supervision · Required: Strong analytical skills. · Required: High attention to detail and accuracy · Required: Strong organizational skills · Required: Ability to prioritize effectively and efficiently meet deadlines and produce work in a timely manner. · Required: Ability to elicit and accept constructive feedback. · Required: Communicate verbally with staff · Required: Give and/or follow verbal and written instructions · Required: Visually inspect all work areas · Required: Ability to analyze and solve problems; efficiently handle multiple duties under pressure with minimal supervision; work flexible hours as required including nights/weekends. · Required: Positive attitude, professional manner, and appearance in all situations. · Ideal: Demonstrated quality written, verbal, and interpersonal communication skills. PHYSICAL REQUIREMENTS, DEMANDS, AND WORKING CONDITIONS: Physical Exertion Heavy work: Exerting up to 50 pounds of force occasionally, and/or up to 35 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects (for example, dish trays, delivery, bucket of water, and mopping ). ASSOCIATE ACKNOWLEDGMENT: This description is not intended to be all-inclusive. Associates may be asked to perform any reasonable management request, within their capabilities, to meet the ongoing needs of the business. NOTE: This description excludes non-essential and marginal functions of the position that are incidental to the performance of the fundamental job duties. Furthermore, the specific examples in each section are not intended to be all-inclusive. Rather, they represent the typical elements and criteria considered necessary to perform the job successfully. Other job-related duties may be assigned by the associate’s supervisor. Furthermore, this description is subject to change, in the sole discretion of the Company and in no way creates an employment contract, implied or otherwise; each associate remains, always, an “at will” associate.

Job Description This position contributes to the success of The Aster LA (“Company”) by maintaining the cleanliness and organization of dining items used in all outlets by keeping the dish area clean and clutter free. RESPONSIBILITIES: · Arrives to work on time in proper uniform and ready to work. · Follows proper daily dish cleaning duties as set forth in company policies · Upon arrival inspect work area for any job-related needs, such as machine chemicals, cleaning supplies, apron, gloves · Organize dish area, set up empty racks/bus tubs, refresh sanitation buckets · Properly wash, stack, and store china, glassware, silverware, cookware, and storage containers in correct racks and storage areas. · Change dishwashing machine water and sink water as required by business levels, and properly uses chemical dilutions · Assists in the timely storing and organization of food deliveries. · Maintains floors clean and dry throughout the shift · Maintains trash cans throughout shift and removes full trashcans and boxes at the end of each shift to proper location · Assists with cleaning grills, mopping floors, and other areas in the kitchen prior to ending the shift · Assists in food prep and any other duties set forth or requested by the chef as needed. · Support in other food & beverage outlets as business dictates. ENSURE A SAFE WORK ENVIRONMENT: · Comply with the Company Health and Safety (H&S) processes while working on projects, initiatives and other work-related duties; perform job duties in a way that will not cause danger to self or others, or violate local, state, federal, environmental regulations. · Promptly correct or report any hazard, potential hazard, or unsafe work condition to the Director of Facilities, and/or People & Culture; wear protective equipment when required; ensure work location is kept safe, clean, and organized. · Seek out opportunities to enhance personal skills set relevant to job tasks. · Maintain current on product knowledge, best practices, and skills needed to meet the demands of your position. EDUCATION, LICENSES, & CERTIFICATIONS: · Ideal: Minimum of one (1) years of experience in same or similar positions in the Food & Beverage industry · Required: Food Handlers Certification(s) · Ideal: High School Diploma or GED Equivalent ESSENTIAL QUALIFICATIONS: · Required: At least eighteen (18) years of age. · Required: Reliable and punctual attendance. · Required: Excellent time-management skills; prioritizing and completing assigned job tasks effectively. · Required: Read and write (English). · Ideal: Bi-lingual oral, speech, and writing skills in and additional language is an asset in this position · Required: Excellent interpersonal and customer service skills · Ideal: Excellent verbal and written communication skills; ability to convey messages clearly and compose correspondence with correct and proper grammar. · Ideal: Strong presentation skills; convey messages clearly and confidently; persuade and effect change positively. · Required: Capable of working effectively independently with minimal supervision · Required: Strong analytical skills. · Required: High attention to detail and accuracy · Required: Strong organizational skills · Required: Ability to prioritize effectively and efficiently meet deadlines and produce work in a timely manner. · Required: Ability to elicit and accept constructive feedback. · Required: Communicate verbally with staff · Required: Give and/or follow verbal and written instructions · Required: Visually inspect all work areas · Required: Ability to analyze and solve problems; efficiently handle multiple duties under pressure with minimal supervision; work flexible hours as required including nights/weekends. · Required: Positive attitude, professional manner, and appearance in all situations. · Ideal: Demonstrated quality written, verbal, and interpersonal communication skills. PHYSICAL REQUIREMENTS, DEMANDS, AND WORKING CONDITIONS: Physical Exertion Heavy work: Exerting up to 50 pounds of force occasionally, and/or up to 35 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects (for example, dish trays, delivery, bucket of water, and mopping ). ASSOCIATE ACKNOWLEDGMENT: This description is not intended to be all-inclusive. Associates may be asked to perform any reasonable management request, within their capabilities, to meet the ongoing needs of the business. NOTE: This description excludes non-essential and marginal functions of the position that are incidental to the performance of the fundamental job duties. Furthermore, the specific examples in each section are not intended to be all-inclusive. Rather, they represent the typical elements and criteria considered necessary to perform the job successfully. Other job-related duties may be assigned by the associate’s supervisor. Furthermore, this description is subject to change, in the sole discretion of the Company and in no way creates an employment contract, implied or otherwise; each associate remains, always, an “at will” associate.

Job DescriptionCompany Description Fairmont Breakers is a beloved feature of the Long Beach skyline, a historic landmark with a character and soul of its own. Originally opened in the roaring twenties as a lavish hotel on the waterfront, Breakers was a sought-after destination for world-famous stars. Following an extensive renovation, Fairmont Breakers returns as Long Beach’s only luxury hotel, restoring one of California’s most storied properties to its original grandeur. It offers 185 boutique rooms and suites; a rooftop pool and terrace; an open-air rooftop lounge with views of the Pacific; a blissful two-story spa, wellness and fitness center; dining venues and bars including a live jazz club; and 10,000 square feet of indoor and outdoor function space. Whether exploring the comforts of elevated coastal Italian cuisine in Nettuno or dining among the stars with champagne and caviar in Sky Room, Fairmont Breakers aims to delight all of your senses with artful surroundings and innovative offerings from our culinary team. Job Description • Consistently offer professional, friendly and proactive guest service while supporting fellow Colleagues, • Maintain complete knowledge of and comply with all departmental policies/service procedures/standards., • Maintain complete knowledge of correct maintenance and use of equipment. Use equipment only as intended., • Review the daily production sheets with the Sous Chef., • Responsible for the day-to-day operations of their station, • Liaise with Front of House Managers as needed, • Have full knowledge of all menu items, daily features and promotions, • Keep overproduction and food waste to a minimum, ensure proper rotation, labeling, and storing of food in order to reduce food cost expense, • Ensure storeroom requisitions are accurate, • Ensure the cleanliness and maintenance of all work areas, utensils, and equipment, • Adhere to standardized recipes and specifications in order to maintain consistency and ensure all standards are met, • Ensure that station opening and closing procedures are carried out to standard, • Keeps overproduction and food waste to a minimum, ensures proper rotation, labeling, and storing of food in order to reduce food cost expense, • Operate all kitchen equipment and conduct themselves with safety in mind at all times, • Ensures that all food products are handled, stored, prepared and served safely in accordance with hotel and government Food Safety guidelines, • Prepares lists of food products required for station for Sous Chef order and approval, • Ensure a clean and safe working environment, and actively participate in health and safety initiatives., • Prepare food of consistent quality following Fairmont Breakers, LQA and Forbes standards., • Practice safety and sanitation standards at all times. Make sure that all perishables are being kept at the proper temperatures., • Cook orders as requested, including special requests., • Start food items that are prepared ahead of time, making sure not to prepare over estimated needs., • Properly portion all items on assigned station., • Check pars for shift use, determine necessary preparation, freezer pull and line set up. Note any out-of-stock items or possible shortages., • Assist in prep work of vegetables and condiments as required for the next shift., • Return all food items not used on next shift to designated storage areas, being sure to cover/date all perishables., • Duties may include different kitchen prep work, garde-manger, line, butcher, fish preparation, soups, hot side, cold side, banquets, colleague dining room, pastry, etc.., • Complete opening duties:, • Set up workstation with required mise en place, tools, equipment and supplies., • Inspect the cleanliness and working condition of all tools, equipment and supplies., • Check production schedule and pars., • Establish priority items for the day., • Inform the Supervisor of any supplies that need to be requisitioned for the day's tasks., • Transport supplies from the Storeroom and stock in designated areas., • Check P.O.S. printers on the line; ensure they are in working order and there is enough paper available for the shift., • Prepare all menu items following recipes and yield guides., • Inform the Sous Chef of any shortages before the item runs out., • Inform F&B service staff of 86'd items and amount of available menu items/special dishes throughout the meal period., • Inform Sous Chef of any excess items that can be used in daily specials or elsewhere., • Breakdown work station and complete closing duties:, • Return all food items to the proper storage areas., • Rotate all returned product., • Wrap, cover, label and date all items being put away., • Straighten up and organize all storage areas., • Clean up and wipe down food prep areas, reach-ins/walk-ins, and shelves., • Return all unused and clean utensils/equipment to the specified locations., • Ice down hot items from the steam table, so they cool quickly., • Turn off all equipment not needed for the next shift., • Restock items that were depleted during the shift., • Review status of work and follow-up actions required with the Sous Chef before leaving., • Assist with inventories as scheduled., • Assist in plating up Banquet meals as assigned., • Work at off-premises functions., • Disinfect and sanitize cutting boards and worktables., • Transport empty, dirty pots and pans to the pot wash station., • Assist Stewards in order to make clean up a more efficient process., • Perform duties in other areas of Kitchen as assigned., • Adhere to all hotel environmental policies and initiatives, • Follow kitchen policies, procedures and service standards, • Follow all safety and sanitation policies when handling food and beverage, • Actively share ideas, opinions and suggestions in daily shift briefings, • Attend designated meetings., • Maintain regular and predictable attendance, • Other duties as assigned Qualifications • Previous experience in the Culinary field required, • Experience in Garde Manger, Hot Kitchen, Banquet Kitchen in a 4 or 5 Diamond Hotel preferred, • Advanced Knife skills, • Diploma or Certification in a Culinary discipline an asset, • Strong interpersonal and problem-solving abilities, • Highly responsible & reliable, • Ability to work well under pressure in a fast-paced environment, • Ability to work cohesively as part of a team, and also under minimal supervision, • Ability to focus attention on guest or employee needs, remaining calm and courteous at all times, • Must be able to work flexible shifts including mornings, evenings, weekends, and holidays, • Ability to verbally communicate effectively with co-workers in English, • Reading, writing and oral proficiency in the English language, • Pushing, pulling, bending, stooping, upward reaching, • Ability to read BEO for banquet functions, • Ability to cook on carving station, pasta, omelet and stir fry stations, • Ability to cut, trim and bone meat prior to cooking, • Ability to wash, peel, cut and shred fruits and vegetable to prepare them for use, • Ability to bake, broil, sauté and steam meats, fish, vegetables and other foods, • Ability to measure and mix ingredients according to recipes, • Must possess high-quality standards., • Ability to have a positive relationship with other departments Additional Information What is in it for you: • Hourly rate: USD $32.00 per hour, • Discounted hotel rooms and food & beverage rates to employees at our sister properties around the globe., • We provide learning programs through our Academies to promote growth and development so that you can perform at your full potential., • Opportunity to develop your talent and grow within your property and across the world! We provide an environment of trust, respect, and integrity. A home away from home. Where diversity and inclusion are celebrated. Privacy and personal information are protected. Through Accor’s Employee Value Proposition, we ensure fair treatment and a workplace free from discrimination & harassment. Our commitment to Diversity & Inclusion: We are an inclusive company and our ambition is to attract, recruit and promote diverse talent. We commit to a future where diverse identities are celebrated, and equitable and inclusive practices are woven into the fabric of everything we do as an organization.

Job DescriptionBenefits: • Flexible schedule, • Free food & snacks Reports To: Restaurant Manager SPECIFIC RESPONSIBILITIES • Sets up work area, equipment and utensils., • Reads tickets processed through the POS system., • Prepares items ordered through the POS system according to recipe book., • Maintains safety and sanitation standards at all times., • Rotates products according to FIFO principle., • Covers, labels, dates and stores prepared products., • Maintains high standards of personal hygiene in compliance with local health ordinances., • Cleans work area, stores utensil, disassembles and cleans equipment., • On occasion, the Line Cook will need to operate the dish machine and may be required to prepare salads and raw product for the use on the cooks line., • Follows all health, safety, sanitation and security standards. ESSENTIAL FUNCTIONS Physical Actions: The Line Cook will be required to engage in the following physical action for up to an eight-hour shift: • 60% Standing, • 5% Walking, • 5% Carrying, • 5% Lifting, • 15% Reaching, • 10% CleaningThe Line Cook will be required to lift up to 50 pounds. The Line Cook works under extreme time pressures to complete orders, considerable dexterity is required. The fryer station entails working with shortening heated to 350 F. The broiler station entails extended periods of work over open flames. Environmental Exposure: The Line Cook is exposed to heat, moisture, smoke and cleaning chemicals used in the kitchen. The Line Cook engages in extensive verbal interaction with co-workers and is exposed to potentially frustrating situations. The Line Cook must work well with limited supervision. BENEFITS/PERKS • Paid sick leave, • Employee Assistance Plan, • A dynamic and energetic work atmosphere, • Career development

Job Description Hotel Equities, a multi-award-winning hotel development and hospitality management company, is currently searching for a remarkable Line Cook for the Chamberlain West Hollywood, CA Job Purpose: Prepare food items in accordance with production requirements and quality standards while maintaining a safe sanitary work environment. Warm, knowledgeable service and helpful guidance reassure guests they’ve made the right choice to stay with us. • Prepare all food items according to standard recipes and as specified on guest check and, • following company and brand standards, to ensure consistency of product and achieve high, • guest satisfaction., • Prepare daily requisitions for supplies and food items for production., • Visually inspect, select, and use only food items of the highest standard in the preparation, • of all menu items., • Check and control the proper storage of product and check portion control, to maintain, • qualify product., • Keep all refrigeration, equipment, and storage and working areas in clean, working condition, • in order to comply with health department regulations., • Good working knowledge of accepted standards of sanitation., • Knowledge of operating all kitchen equipment (stoves, ovens, broilers, slicers, steamers,, • kettles, etc), • Must have knowledge of food and beverage preparation and service., • Promptly report all maintenance issues, • Properly receive and store food and other deliveries, • Consult with upper kitchen management on a daily basis as well as with other departments that, • are directly related to the Food & Beverage Department., • Participate in long range planning., • Participate, support and make recommendations for ongoing hotel programs with continues, • improvement in networking., • Participate in physical inventories, •  Guest Relations, • Be readily available/ approachable for all guests., • Take proactive approaches when dealing with guest concerns. Follow property specific, • second effort and recovery plan., • Extend professionalism and courtesy to guests at all times., • Adhere to all applicable Company Standard Operating Procedures., • Be an enthusiastic, helpful and positive member of the team, • Be professional, responsible and mature in conduct and behavior, • Be understanding of, encouraging to and friendly with all co-workers, • Be self-motivated and use time wisely, • Maintain open line of communications with each department, • Communicate pertinent information, • Respond positively to new ideas, • Openly accept critical/developmental feedback, • Maintain effective communication through the use of meetings, memorandums, • Be available to help other departments in emergency situations, • Perform other assignments as directed by supervisor., • Adhere to all work rules, procedures and policies established by the company including, but not limited to those contained in the associate handbook., • Safety and Security Skills, • Properly handle and account for keys High School diploma /Secondary qualification or equivalent. This job requires the ability to perform the following: • Must be able to speak, read, write and understand the primary language(s) used in the workplace., • Must be able to read and write to facilitate the communication process., • Requires good communication skills, both verbal and written., • Must possess basic computational ability., • Ability to read recipes and follow their instructions., • Ability to physically self-demonstrate culinary techniques, i.e., cutting, cooking principles, plate presentation, safety and sanitation practices., • Ability to create appropriate buffet displays up to 5-6 feet in height and the ability to set up, maintain and breakdown same., • Most work tasks are performed indoors. Temperature is moderate and controlled by hotel, • environmental systems; however, must be able to work in extreme temperatures like freezers (-10 degrees F) and kitchens (+110 degrees F), possible for one hour or more., • Must be able to stand and exert well-paced mobility for up to 4 hours in length., • Ability to physically handle knives, pots, mirrors, or other display items as well as grasp, lift and carry same from shelves and otherwise transport up to 50 pounds to every area of the kitchen. Ability to perform cutting skills on work surfaces, topped with cutting boards, 3 to 4 feet in height (banquet kitchen, prep kitchen, bake shop, etc.). Proper usage and handling of various kitchen machinery to include slickers, buffalo chopper, grinders, mixers, and other kitchen related equipment., • Ability to create, builds, handle, and dismantle displays up to 8 feet high, including ice carvings., • The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level., • Must be able to exert well-paced ability in a limited space and to reach other locations of the hotel on a timely basis., • Must be able to bend, stoop, squat and lift up to 50 lbs. on a regular and continuing basis; must be able to stretch to fulfill cleaning/inspection tasks., • Must be able to exert well-paced ability to maneuver between functions occurring simultaneously., • Must be able to lift trays of food or food items weighing p to 30 lbs. on a regular and continuing basis., • Must be able to push and pull carts and equipment weighing up to 250 lbs. regularly., • Requires grasping, writing, standing, sitting, walking, repetitive motions, bending, climbing,, • listening and hearing ability and visual acuity., • Talking and hearing occur continuously in the process of communicating with guests, supervisors and co-workers., • Vision occurs continuously with the most common visual functions being those of near vision and depth perception., • Requires manual dexterity to use and operate all necessary equipment., • Requires finger dexterity to be able to operate office equipment., • Being passionate about people and service., • Strong communication skills are essential when interacting with guests and employees., • Reading and writing abilities are used often when completing paperwork, logging issues/complaints/requests/ information updates, etc., • Basic math skills are used frequently when handling cash or credit., • Problem-solving, reasoning, motivating, and training abilities are often used., • Team Driven and Values Based Culture, • Medical/Dental/Vision, • Vacation & Holiday Pay, • Same-day pay available, • Employee Assistance Program, • Career Growth Opportunities/ Manager Training Program, • Reduced Room Rates throughout the portfolio, • Third Party Perks (Movie Tickets, Attractions, Other), • 401(k), • Employee assistance program, • Employee discount, • Flexible schedule, • Flexible spending account, • Life insurance, • Parental leave, • Referral program

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. Job Summary Performs a variety of office duties relating to the efficient operation of a one or more Vulcan Materials production facility. Responsible for the supervision or processing of all daily and monthly accounting related information in a timely and accurate manner as required by the Western Division Accounting department. This position will be responsible for preparing a preliminary analysis of monthly financial statements for location management. Working in minimal supervision from Plant or Operations Manager, this position will be responsible for some or all of the following; detailed analysis of monthly margin statements, perform detailed analysis of labor, operating and repair costs, maintain various inventory reconciliations, bank deposits, process accounts payable invoices and monthly accruals, track and process location hourly and salary timecards, maintain a petty cash fund (if necessary), monitor and log procurement card activity, process fuel usage and receipts, track all plant assets, track and monitor maintenance for plant equipment, coordinate location purchases and rentals, produce a variety of daily and monthly reports as required by location management, and act as a location contact to other Vulcan locations as well as the surrounding communities. This position will also work closely with other Vulcan departments addressing issues dealing with Safety, Health and Environmental, Purchasing, and Human Resources. This position reports directly to the location Plant Manager and will also utilize a dotted line responsibility to the Manager of Plant Accounting and Internal Control Processes to verify compliance with all internal control processes for the location. What You'll Do • (40%) Perform a variety of daily plant duties as required by plant manager or division accounting; purchase orders, payables, time cards, fuel usage and receipts, bank deposits, tracking costs and running local reports for plant manager., • (20%) Prepares month-end closing information for accounting based on current closing schedule; fuel inventories, fixed asset changes, equipment rentals, month-end accounts payable accruals and location production reports. Prepares detailed analyses of monthly margin and cost statements as requested by location management., • (15%) Ability to research, document and resolve location related problems as required. Present findings to the appropriate manager where and when needed., • (10%) Provide supervision, guidance and training to lesser-experienced plant clerks., • (10%) Works with division Human Resources department to handle personnel requests and problems. Works with division SHE department handling safety and environmental issues., • (5%) Serve as a contact for the plant. Receive guests and answer phones directing questions or problems to the appropriate individual. Serve as backup for some scale clerk duties when necessary. What We're Looking For: Education: 2 years of college or equivalent experience in accounting related activities are required. College Degree preferred. Experience: Two (2) to three (3) years office experience in bookkeeping or accounting is required. License: A valid Driver's License is required. Knowledge, Skills, and Abilities: Must possess a sound understanding of accounting principles. Thorough knowledge of common office practices, procedures, and use of office equipment are required. Must possess basic math skills focusing on accuracy and be able to use a ten key calculator by touch. Appropriate typing skills and a strong knowledge of all Microsoft Office products is required. Must have solid organizational skills, be able to prioritize and handle multiple tasks simultaneously. Must have good communication skills and be familiar with proper phone etiquette. Behavioral Expectations: High Integrity: Acts with unyielding integrity and honesty in business transactions, promoting company policies and holding self and other employees accountable, keeping promises and commitments. Self-Motivated: Initiates and takes action before being required to do so. Collaborates with others to address issues that arise. Strong Work Ethic: Uses time efficiently. Finds the answers and makes sure the situation is taken care of correctly. Commitment to Learning: Applies intellect to the fullest, welcoming activities that require one to stretch. Responsive: Responds promptly and accurately to requests for information from; employees, customers, support groups (HR, Sales, Safety and Visitors.) and coordinates appropriate follow-up. Strong People Skills: knowing how and when to show empathy, active listener, ability to mediate disputes and being tolerant of differences in a casual or business setting. Be 100% approachable. Communication Skills: Must have outstanding communication skills and have the ability to interact well with people in all levels of the organization. Critical Competencies: Customer Focus: Takes responsibility for customer relationships, keeping promises and commitments. Team Player: Establishes trust with team members and support groups, (Safety, HR, Sales, Vendors) providing support and holding accountability. Recognizes group morale and acts to protect or build as necessary. Unusual Working Conditions: Plant office environment may be exposed to occasional dust and dirt. **Other duties may be assigned as required. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. The industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts our daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, and Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Salary Range: The base salary range for this role is between $29.00 - $36.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. . Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. : Administrative : California-Sun Valley : GM - SO CAL : Full-time : Apr 9, 2026, 8:34:38 PM

Alliance Technical Group is on the lookout for an exceptional leader to take on the pivotal role of Director of Operations of our Ambient Air Quality Division. If you're a dynamic and talented professional with a passion for environmental management and a track record of operational excellence, this could be the career-defining opportunity you've been waiting for. This job will come with a generous salary depending upon experience and performance bonus, benefits, PTO and 9 paid holidays per year. This position will oversee the whole division, and travel will be a necessity. Job Summary: The Director of Ambient Monitoring owns the operational performance and commercial growth of the company's ambient monitoring service line (~$5M in revenue). This leader sets strategic direction, drives revenue growth, and ensures flawless project delivery-all while forging tight cross-functional partnerships with field services, consulting, laboratory analysis, and software/data teams to deliver a seamless, end-to-end value proposition for clients. Supervisory Responsibilities: • Supervises senior management ambient staff; Manages and develops a team of field technicians, project coordinators, and subcontractors; Builds bench strength to support growth., • Delegates both routine and complex responsibilities to direct reports, matching tasks to individual development needs and sharing accountability., • Fosters a collaborative, team-oriented culture across fields, lab, consulting, and software groups. Operational Leadership & Delivery Excellence • Owns P&L performance for the ambient monitoring service line, including revenue targets, margins, utilization, and cost management., • Oversees project planning, resource allocation, field mobilization, and QA/QC to ensure on-time, on-budget, and compliant delivery of monitoring programs., • Establishes and continuously improves standard operating procedures (SOPs), health and safety protocols, and quality systems aligned with EPA, state, and client-specific requirements., • Develops and executes a growth strategy to expand the service line's revenue, market share, and geographic reach., • Serves as a senior client-facing representative: participates in proposals, presentations, contract negotiations, and key account management alongside business development teams., • Identifies and pursues cross-selling and upselling opportunities by packaging ambient monitoring with field services, laboratory analysis, consulting, and data/software solutions., • Monitors market trends, regulatory developments, and competitive landscape to inform service innovation and pricing strategy., • Build and maintains relationships with regulators, industry associations, and strategic partners to generate referrals and strengthen the company's market position. Cross-Functional Integration & End-to-End Value Creation • Collaborates with Field Services leadership to optimize crew scheduling, equipment logistics, and multi-service project delivery., • Partners with Laboratory Analysis teams to align sampling protocols, chain-of-custody processes, turnaround times, and analytical methods with client expectations., • Works with the Consulting practice to integrate monitoring data into compliance reports, risk assessments, and strategic advisory deliverables., • Coordinates with Software/Data teams to leverage the company's data capture and reporting platform, enhancing real-time data delivery, dashboards, and client self-service capabilities., • Champions a "one company" approach, ensuring clients experience a unified, coordinated engagement across all service lines. Technical & Regulatory Leadership • Serves as an internal subject matter expert on ambient air quality monitoring methodologies, instrumentation (continuous monitors, passive samplers, optical methods, etc.), and regulatory frameworks., • Stays current with evolving EPA methods, NAAQS revisions, state implementation plans, and emerging contaminant monitoring requirements., • Provides technical review and sign-off on monitoring plans, QAPP documents, and final deliverables as-needed to meet program, • Supports ancillary services (water quality, noise, odor monitoring) as client needs dictate, ensuring appropriate technical resources are in place., • Supports the use of Salesforce by adding to customer information and contact base via relationships developed through business development activities. Required Skills/Abilities: • Leading through Vision and Values - keeps the organization's vision and values at the forefront of decision-making and actions; models company values during both good and challenging times., • Empowerment/Delegation - comfortably delegates both routine and important tasks, shares responsibility and accountability, views delegation as development opportunities., • Customer Focus - skilled at establishing and maintaining effective customer relationships; gains customers' trust and respect., • Impact/Leadership Disposition - creates a strong first impression, commands attention and respect, and displays confidence., • Communication Skills - communicates clearly and professionally with clients, regulators, and internal teams at executive, technical, and operational levels., • Influencing - understands an individual's motivations and concerns; adjusts style accordingly to persuade others to a desired outcome., • Problem Solving - objectively assesses issues, identifies root causes, and determines alternative solutions., • Strong commercial acumen: comfortable with proposals, pricing, contract terms, and client negotiations., • Deep working knowledge of EPA ambient monitoring methods (e.g., 40 CFR Part 58, TO-series, IO-series, PM methods) and associated QA/QC requirements. Education and Experience: • Bachelor's degree in Environmental Science, Engineering, Atmospheric Science, Chemistry, or a related discipline., • 15+ years of progressive experience in ambient environmental monitoring, with at least 5 years in a leadership role managing operations, teams, and budgets., • Demonstrated track record of growing a services business-achieving revenue targets, winning new accounts, and expanding client relationships., • Experience managing field teams, instrumentation fleets, and subcontractor relationships across multiple concurrent projects., • Master's degree or professional certification (e.g., QEP, CHMM, PE) in a related field preferred., • Experience in a multi-disciplinary environmental services firm that combines field services, laboratory, consulting, and data/software capabilities preferred., • Familiarity with fenceline monitoring (e.g., EPA Method 325), community air monitoring, and real-time data telemetry systems preferred., • Experience with water quality, noise, or odor monitoring programs preferred., • Computer skills - intermediate to advanced proficiency in Word, Excel, Adobe, Outlook, Google Earth, Salesforce, and data management platforms. Physical Requirements: • Must be able to meet physical demands such as:, • Consistent standing or walking, • Consistent bending, crouching, or stooping, • Climbing ladders and/or stairs, • Use of tools or equipment requiring a high degree of dexterity, • Ability to distinguish between shades of color, • Must be willing to work outdoors in industrial environments, • Medical, Dental, and Vision Insurance, • Flexible Spending Accounts, • 401(K) Plan with Competitive Match, • Continuing Education and Tuition Assistance, • Employer-Sponsored Disability Benefits, • Life Insurance, • Employee Assistance Program (EAP), • Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st), • Profit Sharing or Individual Bonus Programs, • Referral Program, • Per Diem & Paid Travel Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Why work at Nebius Nebius is leading a new era in cloud computing to serve the global AI economy. We create the tools and resources our customers need to solve real-world challenges and transform industries, without massive infrastructure costs or the need to build large in-house AI/ML teams. Our employees work at the cutting edge of AI cloud infrastructure alongside some of the most experienced and innovative leaders and engineers in the field. Where we work Headquartered in Amsterdam and listed on Nasdaq, Nebius has a global footprint with R&D hubs across Europe, North America, and Israel. The team of over 800 employees includes more than 400 highly skilled engineers with deep expertise across hardware and software engineering, as well as an in-house AI R&D team. We are seeking an experienced Procurement Specialist to support the US market, with a strong focus on Marketing, HR, and other indirect categories. This role will partner closely with Marketing, HR, Finance, Legal, and other internal stakeholders to drive cost efficiency, supplier performance, and value creation while ensuring compliance with company policies and US market regulations. The Procurement Specialist will be responsible for administering and leading competitive bidding processes (RFPs), negotiating commercial terms (pricing and contractual), proposal analysis, commercial reports issuance, and evaluating and selecting suppliers in accordance with company policies primarily in the areas of Business & 3rd party Services Procurement for company needs. Procurement categories include: Marketing and PR (essential); Employment & Out staffing agencies; Agencies for contractor engagement; Consulting & Audit services; Telecommunication services; Office leases and supplies; other indirect categories Your responsibilities will include: • The Procurement Specialist will be responsible for multiple procurement projects at one time., • Formulates requests for proposal/quotations/information, bid analysis, tenders, and risk evaluations. Coordinates preparation of RFP and SoW., • Administers and leads cross-functional teams through the competitive bidding process, directs supplier negotiations, develops, evaluates, and selects suppliers in accordance with company policies., • Strategically source services and goods using a variety of methods to ensure an uninterrupted supply., • Evaluates and selects suppliers based on their ability to provide the goods/services and at costs consistent budgetary expectations., • Responsible for negotiation of contracts to minimize operational, legal, and financial risks. Collaborates with both internal and external legal counsel, as applicable., • Analyzes trends and makes corresponding sourcing decisions., • Participates in meetings with suppliers to rectify issues and to ensure suppliers are capable of meeting and are aware of the requirements and expectations., • Perform work according to department KPI goals and other duties as may be assigned We expect you to have: • Bachelor’s degree in a relevant field such as Economics, Business Administration, Supply Chain Management, or a related discipline; or an equivalent combination of education and professional experience., • Minimum of 5 years of professional procurement experience, with mandatory expertise in Marketing and PR, HR services, professional services, and a strong understanding of the associated service categories., • Proven expertise in procurement processes, negotiation skills, vendor management, and contract negotiation., • Solid knowledge of business and third-party services purchasing, with a strong commercial focus on project-based contracts and service requirements., • Experience working in a high-performance, complex organizational environment with multiple systems and stakeholders, including compliance, safety, quality, and environmental management., • Fluency in English, both written and spoken., • Strong written and verbal communication skills, with the ability to clearly convey information to diverse audiences., • Demonstrated ability to collaborate effectively with internal stakeholders and external suppliers., • Self-motivated professional with excellent planning, project management, prioritization, and organizational skills., • Strong computer proficiency, including advanced use of Excel and the full Microsoft Office suite., • Familiarity with the ZIP procurement system is preferred. What we offer • Competitive salary and comprehensive benefits package., • Opportunities for professional growth within Nebius., • Flexible working arrangements., • A dynamic and collaborative work environment that values initiative and innovation. We’re growing and expanding our products every day. If you’re up to the challenge and are excited about AI and ML as much as we are, join us!

Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins works with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. Eurofins believes it is a global leader in food, environmental, pharmaceutical and cosmetics products testing and in agroscience CRO services. It is also one of the global independent market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, CDMO, advanced material sciences and in the support of clinical studies. In over just 30 years, Eurofins has grown from one laboratory in Nantes, France to over 50,000 staff across a network of more than 900 independent companies in over 50 countries and operating more than 800 laboratories. Eurofins offers a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products, as well as providing innovative clinical diagnostic testing services, as one of the leading global emerging players in specialized clinical diagnostics testing. In 2021, Eurofins generated total revenues of EUR € 6.7 billion, and has been among the best performing stocks in Europe over the past 20 years. We're looking for a strong business developer with experience in the drug discovery space to join our team! As a Business Development Manager overseeing key accounts, here's what you'll do: • Will be responsible for sales of Eurofins Discovery full portfolio comprised of chemistry, pharmacology, both products and services within assigned key accounts by maintaining current business, expanding to new therapeutic areas and gaining new revenue from other portfolio offerings., • Maintain a proficient understanding of the drug discovery process and selling the portfolio to the US client base., • Prospect within key accounts for the client persona that requires services or products for use in drug discovery., • Build client relationships through use of strategic selling skills and various collaborative approaches with frequent client visits and business reviews., • Provide recommendations and feedback for operational strategy needed to meet client requirements., • Develop key account business plans to grow account-by-account on a strategic basis and monitor against the goals of the plan on quarterly basis. This includes developing KPIs for accounts to demonstrate success in growing the portfolio of business. Pivoting the plan based on changes in customer need as pertinent and working closely with the operational sites within Eurofins Discovery to adopt to customer requirements., • Report on and strategize on competitor activities observed in the region/ globally., • Provide monthly reports against key metrics as defined., • Develop collaborative relationships with Sr. Leaders of the Eurofins Discovery companies in order to support their business and gain knowledge from them about the business., • Work closely with Eurofins sales teams that have relationships with the strategic account in other regions around the globe to effectively implement the account strategy., • Work closely and collaboratively with Marketing to design and implement territory and regional strategies to promote the portfolio and the Eurofins Discovery brand., • Utilize sales and marketing channels effectively including web site, ecommerce, marketplaces and participate effectively and proactively in customer events such as webinars, tradeshows and customer site events., • Travel approximately 30-50% of the time. What we are looking for: • 5+ years’ of experience in field sales with strong understanding of drug discovery and in particular discovery chemistry., • Experience developing and managing large key accounts typically pharma and biotech., • A minimum education of a B.S. chemistry or pharmacology or related discipline and 5 years of sales experience in selling products and services for drug discovery. Excellent knowledge of the pharmaceutical drug discovery and development process, preferably but not necessary to have worked in drug discovery., • Understanding and prior experience in the CRO market and proven ability to analyze and act on the global business trends to drive regional business development activities., • Strong presentation skills. Collaborative nature to work with multiple internal stakeholders., • Ability to endure normal travel to customer sites via mass transportation, personal car, and air travel., • Ability to travel internationally to major regions around the globe with limited restrictions (sales meetings, customer visits, training and customer audits) Salary Range: $125,000 - $150,000/yr. The position is full-time, Monday-Friday, 8 a.m.- 5 p.m., with overtime as needed. • Excellent full time benefits including comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match

Clean Earth is a leading provider of environmental services in the United States providing remediation, disposal, recycling, and beneficial reuse solutions for hazardous and non-hazardous waste, contaminated soil, and dredged material. Our vast portfolio of technologies and services touches nearly every industry that generates waste including energy, infrastructure, commercial, industrial, retail, and healthcare markets. Every day our teams across the country take a hands-on, dedicated approach to recycling and beneficially reusing waste that would otherwise go into landfills. We value our employees as our most important asset, and this is reflected in many areas across our company including recently being named a 2024 Most Loved Workplace ®. We are committed to creating a positive work culture that fosters growth and development while ensuring the health and safety of our employees Candidates must reside in Southern California Applicants Must Have HazWaste Sales Experience The Regional Account Manager will be responsible for expanding the Company’s business within pre-assigned territories. This position is accountable for achieving sales goals through the acquisition and development of new customers and expansion of the product line within the existing customer base. Develop and target regional accounts and prospects in conjunction with the Director of Sales to achieve contract, revenue growth, account milestone objectives, and activity expectations within an assigned account/geography. • Maintains current customers and acquires new customers by meeting or exceeding goals for territory revenue, growth objectives, account retention and customer service functions via telephone and periodic sales calls and presentations. This interaction includes the entire sales cycle from prospecting, maintenance, proposals, contracts, price increases, cancellations and contract renewals, • Builds relationships with current customers while growing the revenue and profits through service changes and price increases., • Communicates regulatory compliance issues to customers., • Implements sales strategies to maximize revenue and profits through maintenance and penetration of existing customers., • Resolve problems and coordinate customer needs with Field Operations and/or Customer Service group., • Works as liaison between customers and accounts payable department for collection of receivables when requested., • Assists with coordination and implementation of Regional and National account sales activities., • Sell in a highly consultative manner, with ability to articulate the company value-proposition and the benefits of working with Clean Earth brand over other traditional waste services companies and direct competition., • Creates presentations for key sales customers and prospects., • Coordinate the development of sales objectives, territory and account selling strategies and ensures their execution., • Completes territory routing plans, territory forecasts and customer business reviews., • Develop account specific strategies and plans -- and execute against those plans -- to win national and regional in the manufacturing and industrial market space., • Provide management with information used to evaluate regional & national opportunities., • Promotes customer brand loyalty by participating in or joining regional/national professional organizations that serve the regional marketplace and/or consumers., • Make daily calls on new prospects within the targeted territory geography, along with identifying leads via a variety of internet websites, networking, key vendors and peers within local and national organizations., • Monitor and communicate sales performance against goals through approved performance metrics. Basic Required Qualifications: • Bachelor’s Degree in Business, Sciences, Marketing or Management coupled with 3+ years’ experience in outside sales & selling outsourced services to the manufacturing and industrial market or related industries. OR 5+ years industry related sales experience, • 5+ Years of sales experience manage multiple accounts., • Knowledge of RCRA, DOT, DEA regulatory environment, • Up to 50% travel by car to customers within territory & possible overnight & weekend travel., • Similar background/experience within waste management/environmental services, • Proficiency in Microsoft Word, Excel and PowerPoint,, • Proficiency in Salesforce or similar CRM, • Experience in managing a territory while demonstrating a proven track record of sales success achieving or exceeding aggressive growth targets and sales quotas., • Self-directed with the ability to work on multiple projects with competing priorities and deadlines, • Demonstrates established relationships or the ability to rapidly establish relationships within the C-level, Regulatory Affairs, Quality, Procurement, Supply Chain, Operations and Marketing functions within the retail industry, • Demonstrates established relationships or the ability to rapidly establish relationships within the Environmental Health and Safety, Regulatory Affairs, Quality, Procurement, Supply Chain, Operations and Marketing functions within the manufacturing industry. Clean Earth offers competitive benefits including health, dental, vision, life, and disability insurance plans starting on the first day of employment; paid time off, wellness benefits, employee discount program, tuition assistance, and a 401k with company matching. We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, gender identity, or genetics. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. If you have a difficulty applying for any job posted on Harsco Clean Earth’s website because a disability prevents you from using the online system, Clean Earth offers the following alternate application procedure: Call toll free (833) 209-2659 and leave your name, phone number, city and state of residence. Clean Earth will arrange for an alternate method of applying and will consider your application together with all other applications received for the job. This line is dedicated to disability applications only. No other inquiries will receive a response.

Job Description Material Handler, Entry Traffic & Warehousing Department Monday through Friday 7:30am to 4:00pm Safety Statement: This is a safety sensitive position. Job Purpose: Moves material and products in manufacturing and/or warehouse area by manual hand truck, electric hand truck and/or forklift with the purpose of loading, unloading, or stocking in warehouse or cells. Essential Functions: • Uses a forklift, pallet jack and/or hand dolly., • Follows instructions to determine materials or containers to be moved., • Prepares loads for shipment; for instance, banding, plastic wrapping the product, etc., • Loads and unloads materials onto or from pallets manually and onto or off trailers., • Conveys materials to or from storage or work sites to designated areas using a forklift, manual or electrical pallet jack., • Secures lifting attachments to materials and conveys load to designated location, i.e. lift forks, fork extensions, extension boom., • Works under direct supervision on duties and tasks that are basic, selecting from written instructions and established procedures., • Will be working with a team of co-workers. Required Qualifications: • Six months of prior related experience is preferred, but not required., • Manufacturing background a plus, but not required., • Must have the ability to drive motorized equipment or vehicles and have a valid driver’s license., • Must have the ability and awareness to recognize sights and sounds in the workplace which the employee might encounter., • Applies basic and develops intermediate skills in procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization., • Must have basic math skills., • Must be flexible with required working hours, including overtime. Must be able to lift up to 70 lbs. from floor to shoulder level, to routinely push and/or pull a minimum of 50 pounds with a manual pallet jack, to occasionally bend at the knee level, stoop and/or climb. Must be able to stand for a minimum of 8 to 10 hours. Must be able to use a forklift, pallet jack and hand dolly. Must be able to pass a forklift-driving test to become an authorized forklift driver. Background check is required. Will be required to wear proper protective equipment including, but not limited to, protective eye and/or hearing equipment to safely perform job duties. Will occasionally be exposed to chemicals, dust, heat, cold, gas, and/or fumes. Must be able to adjust to normal plant environmental conditions (above moderate hot and cold conditions) and to adapt quickly to physical applications requiring varying motor skills. This job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.” Activity Hours per day Never 0 hours Occasionally up to 3 hours Frequently 3-6 hours Constantly 6-8+ hours Sitting X(if on a lift) Walking X Standing X Bending (neck) X Bending (waist) X Squatting X Climbing X Kneeling X Crawling X Twisting (neck) X Twisting (waist) X Hand Use: Dominant hand Right Left X Is repetitive use of hand required? X Simple Grasping (right hand) X Simple Grasping (left hand) X Power Grasping (right hand) X Power Grasping (left hand) X Fine Manipulation (right hand) X Fine Manipulation (left hand) X Pushing & Pulling (right hand) X Pushing & Pulling (left hand) X Reaching (above shoulder level) X Reaching (below shoulder level) X LIFTINGCARRYING Never 0 hrs. Occasionally up to 3 hrs. Frequently 3-6 hrs. Consistently 6-8+ hrs. Height Never 0 hrs. Occasionally up to 3 hrs. Frequently 3-6 hrs. Consistency 6-8+ hrs. Distance 0-10 LBS. X 6 to 8 ft. X 11-25 LBS. X X 26-50 lbs. X X 51-75 lbs. X X 776-100 LBS. X X 100+ LBS. X X

Job Description P O S I T I O N D E S C R I P T I O N TITLE PACKER B DEPARTMENT Production SUPERVISOR Production Team Leader LOCATION Commerce A. PURPOSE Assure product is packed within established time. B. DUTIES The duties of this position are those described below. This job description does not state or imply that the duties listed are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform any other job-related duties as requested by management. 1. Essential Duties These duties directly and substantially serve to achieve the purpose of the position. ♦ Receive and follow instructions from the Team Leader in charge. ♦ Pack, stack, pull, push and label product boxes & cases. ♦ Load/unload bread upon request, as instructed. ♦ Repack and assemble shippers. ♦ Inspect quality of product. ♦ Assist co-workers as required. ♦ Support machine operator as needed. ♦ Communicate any operational problems that may affect quality of product to Team Leader. ♦ Perform general housekeeping functions. ♦ Follow safety requirements at all times. ♦ Perform any and all tasks requested by the Team Leader or lead person. ♦ Understand and use Sugar Foods Corporation’s Core Values: 1. Be Prepared 2) Show Up 3) On Time 4) Follow Through C. Physical Requirements ( All requirements are subject to possible modification to reasonably accommodate individuals with a disability.) 1. Physical activities of this position. (Check ALL that apply.) ■ Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms. Body agility is emphasized. This factor is important if the amount and kind of climbing required exceeds that required for ordinary locomotion. ■ Balancing: Maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces. This factor is important if the amount and kind of balancing exceeds that needed for ordinary locomotion and maintenance of body equilibrium. ■ Stooping: Bending body downward and forward bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles. ■ Kneeling: Bending legs at knee to come to a rest on knee or knees. ■ Crouching: Bending the body downward and forward by bending leg and spine. ???? Crawling: Moving about on hands and knees or hands and feet. ■ Reaching: Extending hand(s) and arm(s) in any direction. ■ Standing: Particularly for sustained periods of time. ■ Walking: Moving about on foot to accomplish tasks, particularly for long distances. ■ Pushing: Using upper extremities to press against something with steady force in order to thrust forward, downward or outward. ■ Pulling: Using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion. ■ Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position to position. This factor is important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles. ■ Fingering: Picking, pinching, typing or otherwise working, primarily with fingers rather than with the whole arm as in handling. ■ Grasping: Applying pressure to an object with the fingers and palm. ■ Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips. ■ Talking: Expressing or exchanging ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly or quickly. ■ Hearing: Ability to understand oral instructions in a noisy environment. ■ Vision: Visual inspection of areas to be cleaned. ■ Repetitive motions: Substantial movements (motions) of the wrists, hands and/or fingers. 2. Degree of physical exertion required for the position. (Check ONE.) ???? Sedentary Work: Exerting up to 10 lbs of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary Work involves sitting most of the time. Jobs are sedentary if walking and standing are required only occasionally and all other sedentary criteria are met. ???? Light Work: Exerting up to 20 lbs. of force occasionally and/or up to 10 lbs. of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for Sedentary Work and the worker sits most of the time, the job is rated for Light Work. ■ Medium Work: Exerting up to 50 lbs. of force occasionally and/or up to 20 lbs. of force frequently, and/or up to 10 lbs. of force constantly to move objects ???? Heavy Work: Exerting up to 100 lbs. of force occasionally and/or up to 50 lbs. of force frequently, and/or up to 20 lbs. of force constantly to move objects ???? Very Heavy Work: Heavy Work: Exerting in excess of 100 lbs. of force occasionally and/or in excess of 50 lbs. of force frequently, and/or in excess of 20 lbs. of force constantly to move objects 3. Environmental conditions the employee will be subject to in this position. (Check ALL that apply.) ■ Inside environmental conditions: Protection from weather conditions, but not necessarily from temperature changes. ???? Outside environmental conditions: No effective protection from weather. ???? Both environmental conditions: Activities occur inside and outside. ???? Extreme cold: Temperatures below 32 degrees for periods of more than one hour. ■ Extreme heat: Temperatures above 100 degrees for periods of more than one hour. ■ Noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level. ???? Vibration: Exposure to oscillating movements of the extremities or the whole body. ■ Hazard: Includes a variety of physical conditions, such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. ???? Atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin: Fumes, odors, dusts, mists, gases or poor ventilation. ■ Oils: There is air and/or skin exposure to oils and other cutting fluids. ???? Humidity: Exposure to humid conditions ranging from 70 to 92 percents. ???? Respirator: Use is required. ???? None: No substantial exposure to adverse environmental conditions (such as in typical office or administrative work). D. EDUCATION/EXPERIENCE/SKILLS REQUIRED ♦ High School

Job DescriptionServicon Systems, Inc. EEO Statement: Equal Employment Opportunity/M/F/disability/protected veteran status Servicon Systems is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Floor Care Technician US-CA-Los Angeles Job ID: 2026-7207 Type: Full-Time of Openings: 1 Category: Floor Care LAC Courts - C.S.F. Criminal Justice Center Who We Are We are a family and women-owned local company with over 50 years of experience in environmental solutions, specializing in infection prevention for complex facilities. Our responsiveness allows us to quickly meet staff and client needs. Servicon’s Culture of Caring drives our commitment to healthy environments, supported by three pillars: People, Programs, and Performance. These focus areas reinforce our values and help improve people's lives, patient care, infection prevention, and operational efficiency. The Role Directly responsible for performing floor care cleaning services, window cleaning, and general janitorial duties according to client and company standards and values; providing quality workmanship in a timely and effective manner, ensuring punctuality, safe practice, and compliance to company procedural floor care processes; maintaining floor care equipment; and completing work assignments in detail to ensure customer satisfaction. WHAT YOU WILL DO • Understand and practice all client and Servicon Safety programs, promoting safety as a culture to team members and wearing all Personal Protective Equipment (PPE) when performing work., • Proficient in performing various types of floor care work including but not limited to: stripping/refinishing hard surface floors, carpet care/extraction, and operating highly-specialized floor care equipment., • Perform work assignments as directed and in compliance with Servicon’s floor care procedures/processes., • Inspect assigned area while performing duties and after work has been completed to verify that all work has been done in compliance with site-specific procedures and client’s Scope of Work (SOW)., • Ensure all supplies are stocked and available, equipment is clean and in good operating order, and/or report malfunctioning equipment in a timely manner., • 1+ yr. floor technician experience is preferred, • Must have a valid driver's license, • High school diploma or GED equivalent (preferred), • Extensive floor care product knowledge, • Working knowledge of multiple hard floor surfaces (marble, granite, VCT, etc.), • Working knowledge of carpet cleaning procedures (shampooing, extracting, bonneting), • Ability to perform window cleaning and power washing duties, • Proficient verbal / written communication skills (Spanish a plus), • Planning / scheduling, problem solving, • Time management skills Why You Will Love It Here • Hybrid work environment, where applicable, • A friendly, respectful, energetic corporate culture that will allow you to thrive, • Work in an environment where you can see the difference you make daily!, • Employee Assistance Program (EAP), • Competitive base salary, • Safe harbor 401(k) with company matching (if applicable) PI76b905eb8ae9-25405-40404388

Job DescriptionDescription: About the Company Direct Edge is a fast paced and quickly growing printing company specializing in digital, offset and large format printing for enterprise, agency and trade printers. If you are looking for an opportunity to work in an environment that values your professional skills, Direct Edge has a career path for you. We are currently seeking experienced and professional full-time candidates to join our team. Job Summary Delivery driver makes deliveries and pickups along with loading and unloading of trucks. They work safely at all times. They are friendly, observant, and able to determine customer needs and communicate that information to the Manager and/or Warehouse Supervisor. Essential Duties and Responsibilities · Safely operate commercial vehicles and maintain a clean appearance by complying with organization operational policies, procedures, and standards, as well as state and local driving rules and regulations; cleans truck exterior and interior. · Perform pre- and post-trip inspections and provide detailed information to management on a daily basis related to customer service, operating discrepancies, and other administrative data. · Maintain trucks operating efficiency by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; scheduling repairs. · Keep delivery, truck, and driving records by obtaining receipt acknowledgments; recording tracking information; completing driver log and truck performance forms. · Enhance organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. · Assist with loading and unloading at other locations. · Understand the shipping documents that are associated with each delivery and have accurate directions to each delivery destination. · At the end of the workday, remove keys from the truck and store keys in the approved location. · Perform other reasonably related duties as assigned by immediate supervisor and other management as required. · Other warehouse duties as assigned. Requirements: Qualifications – Education, Experience, License/Certifications: · Must have a clean driving record. · Must be at least 21 years old of age. · Must pass drug testing and background check. · High school diploma or equivalent · A proper and valid driver's license for the vehicle(s) being driven · A driving record that demonstrates good driving skills in compliance with Company policy · No convictions for reckless driving within the past 5 years · No convictions for DUI within the past 5 years · No suspensions or revocations within the past 5 years · No serious violations within the previous 12 months (15 mph or greater, following too closely, improper passing, traffic offenses committed in a CMV in connection with a fatality) · No more than 1 moving violation within the past 12 months · No more than 2 moving violations within past 3 years Knowledge, Skills, and Abilities: · Experience driving trucks larger than 20ft. · Good knowledge of Orange and Los Angeles counties. · Proficient at scheduling routes and being deadline-oriented. · Dependable and energetic in working in a team environment. · Excellent organizational skills as you will be working with both the shipping/receiving manager and the management team to coordinate your daily driving schedule. · Loading of items in to the truck to be delivered. · Secure the load properly; so that nothing will shift or get damaged. · Ensure the necessary equipment to safely unload item is available. · Forklift certification is a plus. · Know laws, rules and regulations governing driving motor vehicles in general, and commercial vehicles subject to Department of Transportation regulations in particular. · Know of, be able to apply and practice safety precautions in a warehouse and material handling environment. · Able to build and maintain a positive working relationship with customers, vendors and co-workers. · Able to remain calm and function effectively in stressful, unexpected, and/or emergency situations. · Able to learn to operate warehouse material-handling equipment. · Read, write, speak and understand English. Physical Requirements · Mobility: Ability to stand, walk, sit, and climb in and out of delivery trucks frequently throughout the day. · Strength: Ability to lift, carry, push, or pull up to 50 pounds regularly and up to 75 pounds occasionally. · Endurance: Ability to work on your feet for extended periods, including walking and standing for several hours at a time. · Manual Dexterity: Frequent use of hands and arms for loading and unloading items, operating delivery vehicles, and handling material-handling equipment such as dollies or pallet jacks. · Visual Requirements: Ability to read and interpret maps, road signs, and delivery documents, and inspect deliveries and vehicle conditions. · Hearing and Communication: Ability to hear and communicate effectively with customers, coworkers, and dispatch, including over the phone or radio. · Environmental Tolerance: Ability to work outdoors and indoors in varying weather conditions and environments, including warehouses and delivery sites. · Driving: Ability to sit for extended periods while driving and safely operate commercial vehicles over long distances. · Flexibility and Coordination: Ability to bend, kneel, squat, and twist as needed for loading and unloading items and securing cargo. · Cognitive Requirements: Ability to remain alert and focused during driving and delivery tasks, and to respond quickly to changing traffic or work conditions. Compensation: The base compensation range for this full-time position is $25-$28 per hour plus benefits. Compensation ranges are determined by various factors, including role, experience, and location. The pay range displayed reflects the minimum and maximum target for new hire salaries for this position. Within the range, actual individual compensation is determined by various factors, including location, job-related skills, experience, and relevant education or training.

Job DescriptionCompany Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description Job Summary: Responsible for receiving materials into the warehouse, maintaining accurate and safe storage of inventory, properly issuing materials to internal customers, shipping materials using various methods, processing related records, reports, documents and files. Key Characteristics • Detail Orientation., • Strong organizational, written and oral skills, • Review receiving documents for accuracy and completeness prior to accepting receipt of order from carrier, • Any major discrepancies, problems or concerns are reported to their supervisor, • If required, contact requisitioning department/person for disposition instructions, • Receive materials into inventory by recording receipt in Enterprise Resource Planning (ERP) system and physically placing into proper warehouse location. Forward receiving documents appropriately or receive the inventory into the ERP system, • Process outgoing materials by recording in ERP system and delivering to internal customers, • Assist in conducting physical inventory, • Maintain clean, orderly, and safe warehouse and storage facilities, • Notify supervisor of all safety problems or concerns, • Provide assistance as needed in the shipping of materials and equipment to other service centers, job sites, etc., • Prepare and maintain accurate and timely materials control records as required, • Resolve routine receipt, storage, and issuing problems with assistance from supervisor, • Perform other duties as required to support the procurement and materials control process and management needs, • Work to control inventory levels, cycle time, machine loads, and other aspects as required to meet production schedulesQualifications Knowledge, Skills & Abilities Education & Experience Required: • High School Diploma, G.E.D, Homeschool Certification, or international equivalent to High School Diploma., • Good working knowledge of MS Office (Excel, Word, PowerPoint) and SAP, • Able to left up to 50 lbs, • Basic computer skills required, • Associates Degree or some college course work, • Strong organizational, written and oral skills, • One year work-related experience preferred, • ERP / Inventory control software experience desirable, • Cooperative., • Initiative., • Ability & willingness to handle repetitive weight - 50 lbs, • Ability & willingness to work in all weather conditions, • Ability & willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, & power industry facilities Additional Information At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We’re an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive compensation and benefits that include: ● Compensation - The salary range is tied to the market for similarly benchmarked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate’s knowledge, skills, experience, and market conditions, as well as internal peer equity. Depending upon all the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range: $21-$24 USD | No bonus ● Medical, Dental, & Vision Insurance Starting Day 1! ● Life Insurance ● Paid Time Off ● Paid Holidays ● Parental Leave ● 401(k) Plan - 3% default contribution plus matching! ● Flexible Spending & Health Saving Accounts ● AD&D Insurance ● Disability Insurance ● Tuition Reimbursement Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of Veolia, and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

When you join the Huntington Hospital team, you are aligning yourself with an organization whose values drive our philosophy of compassionate community care. Over the past 129 years, we’ve grown from a small 16-bed hospital to a nationally recognized healthcare leader with 619 beds. As part of our commitment to providing equitable, high-quality care to all members of our community, we embrace differences and work hard to create a place of belonging for our patients and our employees. When you join the Huntington family, you’ll be empowered to enact change that continuously improves our ability to deliver world-class care, with kindness and dignity, to all who need it. Internal Workers – Please log into your Workday account to apply Expectations: Performs general cleaning functions in all areas of the facility, following proper infection control and safety procedures. Includes cleaning in occupied patient rooms, discharge cleaning, ancillary area cleaning and public areas. Ability to work with blood and body fluids in a high paced environment. Must be willing to work as a team player in order to provide consistent quality care for patients. This position may require flexibility of hours. EDUCATION: High School Diploma or GED preferred. EXPERIENCE/TRAINING: Required: Previous customer service experience. Preferred: Six (6) months of housekeeping. Ability to read and write and communicate in Basic English. ‎ Job Title: Environmental Service Aide Per Diem ‎ Department: Environmental Svcs ‎ Shift Duration: 8 ‎ Primary Shift: Days ‎ Time Type: Part time ‎ Location: 100 W California Blvd, Pasadena, CA 91105 ‎ Pay Range: The estimated base rate for this position is $25.20 - $27.09. Additional individual compensation may be available for this role through differentials, extra shift incentives, bonuses, etc. Base pay is only a portion of the total rewards package, and a comprehensive benefits program is available for qualifying positions. ‎ ‎ ‎ ‎

Job DescriptionYou’ve Never Been Satisfied with "Good Enough." You want to make an impact, not just manage projects, but change how the world gets built. At Accenture Infrastructure & Capital Projects, you’ll do exactly that. You’ll help develop and deliver the factories, grids, transit systems, and public infrastructure that keep communities moving - and do it smarter, safer, and more sustainably than ever before. You’ll work alongside people who think big and act bold - project managers, engineers, technologists, and strategists who blend real-world experience with digital innovation and AI. Together, we’re transforming how capital projects are planned, managed, and executed, creating a better way to build for the future. Because “good enough” builds the past. You’re here to build what’s next, on a team that outperforms every norm. Visit us here to learn more about Accenture Infrastructure & Capital ProjectsAs Accenture continues to grow, you may see a variety of new career opportunities, and depending on the role and location you may be directed to apply through Accenture Infrastructure and Capital Projects LLP or one of our other legal entities - Accenture Infrastructure and Capital Projects, LLC or Accenture Infrastructure and Capital Projects Inc., with benefits varying by country and role, so please check with your recruiter for details.THE WORK: • You’ll manage, oversee, and coordinate all facets of the pre-construction, bid and award, construction, and close-out phases of assigned projects, ensuring project goals and deadlines are met., • You’ll review pre-construction documents, including designs and specifications, and submit comments to designers as necessary to ensure that all requirements are met., • You’ll plan, organize, and prepare reports to upper management regarding the status and progress of the projects, providing key updates and addressing potential issues., • You’ll coordinate with pertinent public agencies, client staff, and project teams during pre-construction and construction phases to ensure compliance with off-site work regulations and project requirements., • You’ll monitor the project budget monthly, ensuring that it accurately reflects the status and progress of the project, and address any discrepancies promptly., • You’ll manage the daily activities of the contractor, review construction schedules and submittals, and coordinate responses to contractors’ inquiries to ensure project progress., • You’ll receive, reviews, and negotiate contractor change order proposals to achieve a fair and reasonable price in accordance with contract terms, while addressing any schedule impacts in a timely manner., • You’ll review and monitor payments to the contractor, architects, engineers, and other relevant parties, ensuring that payments are processed according to contract terms., • You’ll administer the provisions of Professional Service Agreements between architects and the district, ensuring that contractual obligations are met, and project milestones are achieved., • You’ll monitor and manage the project close-out process, including overseeing financial close-out, ensuring all deliverables are completed, and confirming that the project is completed within budget and timeline., • Onsite at client site: The work location for this role is onsite with our clients and partners to enable delivery and cultivate our client relationships.HERE’S WHAT YOU’LL NEED:, • Graduation from a recognized college or university with a bachelor’s degree in architecture, Engineering, or Construction Management OR, • Graduation from a recognized college or university with a bachelor’s degree and possession of a valid Certified Construction Manager (CCM) credential or the ability to complete CCM within one (1) year of employment OR, • Minimum of 20 (twenty) years of experience and possession of a valid Certified Construction Manager (CCM) credential the or ability to complete CCM within one (1) year of employment, • Minimum of fifteen (15) years full time paid professional experience in Construction and/or a combination of Project and Construction Management of Commercial and/or Public/Educational Facility Construction, • Minimum of five (5) years full time paid professional experience in managing large programs with projects having construction values more than $20MBONUS POINTS IF YOU HAVE:, • PMP, CCM or related certificates, • Design Build Experience, • Experience utilizing Building Information Modeling (BIM), • Experience with Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS), • Experience with Division of the State Architect (DSA) construction/design processes, • Safety and OSHA Safety Regulations (OSHA 30 minimum), • A valid Certificate of Registration as an Architect by the California Architectural Board or Professional Engineer by the State Board for Professional Engineers and Land Surveyors, • Valid Construction Manager (CCM) credential by the Construction Manager Certification Institute (CMCI)Compensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired in Illinois, Minnesota, California, Colorado, District of Columbia, Maryland, Massachusetts, New York, New Jersey, Ohio or Washington as set forth below. We accept applications on an on-going basis and there is no fixed deadline to apply.We believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities. For details, view a copy of the Accenture Equal Opportunity and Affirmative Action Policy StatementAccenture is an EEO and Affirmative Action Employer of Females/Minorities/Veterans/Individuals with Disabilities. Accenture is committed to providing veteran employment opportunities to our service men and women.

Job DescriptionYou’ve Never Been Satisfied with "Good Enough." You want to make an impact, not just manage projects, but change how the world gets built. At Accenture Infrastructure & Capital Projects, you’ll do exactly that. You’ll help develop and deliver the factories, grids, transit systems, and public infrastructure that keep communities moving - and do it smarter, safer, and more sustainably than ever before. You’ll work alongside people who think big and act bold - project managers, engineers, technologists, and strategists who blend real-world experience with digital innovation and AI. Together, we’re transforming how capital projects are planned, managed, and executed, creating a better way to build for the future. Because “good enough” builds the past. You’re here to build what’s next, on a team that outperforms every norm. Visit us here to learn more about Accenture Infrastructure & Capital ProjectsAs Accenture continues to grow, you may see a variety of new career opportunities, and depending on the role and location you may be directed to apply through Accenture Infrastructure and Capital Projects LLP or one of our other legal entities - Accenture Infrastructure and Capital Projects, LLC or Accenture Infrastructure and Capital Projects Inc., with benefits varying by country and role, so please check with your recruiter for details.THE WORK: • You’ll manage, oversee, and coordinate all facets of the pre-construction, bid and award, construction, and close-out phases of assigned projects, ensuring project goals and deadlines are met., • You’ll review pre-construction documents, including designs and specifications, and submit comments to designers as necessary to ensure that all requirements are met., • You’ll plan, organize, and prepare reports to upper management regarding the status and progress of the projects, providing key updates and addressing potential issues., • You’ll coordinate with pertinent public agencies, client staff, and project teams during pre-construction and construction phases to ensure compliance with off-site work regulations and project requirements., • You’ll monitor the project budget monthly, ensuring that it accurately reflects the status and progress of the project, and address any discrepancies promptly., • You’ll manage the daily activities of the contractor, review construction schedules and submittals, and coordinate responses to contractors’ inquiries to ensure project progress., • You’ll receive, reviews, and negotiate contractor change order proposals to achieve a fair and reasonable price in accordance with contract terms, while addressing any schedule impacts in a timely manner., • You’ll review and monitor payments to the contractor, architects, engineers, and other relevant parties, ensuring that payments are processed according to contract terms., • You’ll administer the provisions of Professional Service Agreements between architects and the district, ensuring that contractual obligations are met, and project milestones are achieved., • You’ll monitor and manage the project close-out process, including overseeing financial close-out, ensuring all deliverables are completed, and confirming that the project is completed within budget and timeline., • Onsite at client site: The work location for this role is onsite with our clients and partners to enable delivery and cultivate our client relationships.HERE’S WHAT YOU’LL NEED:, • Graduation from a recognized college or university with a bachelor’s degree in architecture, engineering, or construction management OR, • Graduation from a recognized college or university with a bachelor’s degree. The candidate must be able to complete the Certified Construction Manager (CCM) credential within one (1) year of employment in the Facilities Services Division of the Los Angeles Unified School District OR, • Possession of a valid Certified Construction Manager (CCM) credential may be substituted for the required education, • Minimum of ten (10) years full time paid professional experience in Construction and/or a combination of Project and Construction Management of Commercial and/or Public/Educational Facility Construction, • Minimum of three (3) years full time paid professional experience with full responsibility for coordinating complex projects with construction values in excess of $10MBONUS POINTS IF YOU HAVE:, • Design Build Experience, • Experience utilizing Building Information Modeling (BIM), • Experience with Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS), • Experience with Division of the State Architect (DSA) construction/design processes, • Safety and OSHA Safety Regulations (OSHA 30 minimum), • A valid Certificate of Registration as an Architect by the California Architectural Board or Professional Engineer by the State Board for Professional Engineers and Land Surveyors, • A valid Construction Manager (CCM) credential by the Construction Manager Certification Institute (CMCI)Compensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired in Illinois, Minnesota, California, Colorado, District of Columbia, Maryland, Massachusetts, New York, New Jersey, Ohio or Washington as set forth below. We accept applications on an on-going basis and there is no fixed deadline to apply.We believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities. For details, view a copy of the Accenture Equal Opportunity and Affirmative Action Policy StatementAccenture is an EEO and Affirmative Action Employer of Females/Minorities/Veterans/Individuals with Disabilities. Accenture is committed to providing veteran employment opportunities to our service men and women.

Job Description Hope Mission Statement The mission of Hope the Mission is to prevent, reduce and eliminate poverty, hunger, and homelessness by offering immediate assistance and long-term solutions. Position Purpose and Summary The Client Services Monitor (CSM) works directly on-site and is responsible for keeping participants safe, supporting daily operations, community standards and helping Hope the Mission's Interim Housing programs run smoothly. The CSM plays an important role in creating an environment that is safe, structured, and respectful — one where every participant is treated with dignity and fairness. This position requires someone who shows up consistently, uses good judgment, and genuinely cares about serving people experiencing homelessness. Many participants in our programs have been through long periods of instability, crisis, and trauma. When a CSM shows up with calm, care, and compassion, it creates a sense of safety and routine that participants can count on as they work toward stable housing. The CSM reports to the Program Manager or Assistant Program Manager and works alongside site staff to make sure the program runs well, meets contract requirements, and reflects Hope the Mission's values in every interaction. Primary Duties and Responsibilities Facility Maintenance and Sanitation * Assists with and facilitates routine cleaning of all facility areas to maintain cleanliness, safety, and operational readiness * Cleans and disinfects restrooms and shower areas after each use, without exception. Maintains sanitary and safe restroom and sink conditions at all times. Completes deep cleaning of restrooms and common areas. * Monitors and maintains hygiene areas and community areas; ensures resources are fully stocked, replenishing as needed. * Washes, dries, and prepares towels used for restroom and shower services * Monitors laundry rooms, restrooms, and common areas to ensure cleanliness and appropriate use * Maintains accurate shower and restroom usage logs Participant Safety and Monitoring * Conducts required wellness checks each shift to ensure participant safety and well-being * Monitors participant movement, common areas, and site activity to promote safety and program compliance * Conducts routine site walk-throughs and safety checks during assigned shifts * Supports contraband control and safety procedures in accordance with agency policy * Responds to incidents and emergencies using trauma-informed de-escalation techniques and follows all incident reporting protocols * Supports emergency responses — including medical emergencies, overdoses, and evacuations — until leadership or first responders arrive Participant Services and Engagement * Provides direct, respectful assistance to participants, including answering questions, responding to requests, and connecting participants to appropriate staff or resources * Assists with participant intake, orientation, and explanation of site guidelines as directed by management * Distributes hygiene supplies including soap, shampoo, towels, and related items to participants as needed * Supports meal service, supply distribution, and general operational duties as assigned Documentation and Reporting * Completes Daily Activity Reports (DARs) accurately, objectively, and in a timely manner * Conducts intake, exit, and case notes in HMIS where applicable * Assists with documentation related to participant movements, wellness concerns, or incidents as required * Observes and reports safety concerns, maintenance issues, guideline violations, and unusual occurrences to site leadership promptly Shift Operations * Provides support during shift pass-downs and communicates relevant updates between shifts * Provides overnight, evening, weekend, or holiday coverage as scheduled * Performs other duties as assigned Skills * Strong observation and situational awareness skills * Trauma-informed communication and de-escalation techniques * Ability to maintain professional boundaries with participants * Clear, objective, and professional written documentation skills * Ability to follow policies, procedures, and chain of command * Strong teamwork and communication skills * Basic computer and email proficiency * Ability to lead with integrity and uphold organizational mission, values, and service philosophy. * Ability to cultivate and maintain collaborative relationships with community-based organizations and external service providers. Strong Interpersonal Skills. * Maintains professionalism, empathy, and sound decision-making when working in complex or emotionally challenging environments. Qualifications * High school diploma or GED required * Previous experience in homeless services, shelter operations or social service preferred * Knowledge of trauma-informed care and harm reduction principles preferred * Ability to work flexible schedules including nights, weekends, and holidays Mandatory Requirements * Background Screening – Employment is contingent upon the successful completion of background checks as required per worksite. * Drug and Alcohol Testing – Candidates must pass pre-employment and ongoing drug and alcohol screenings in accordance with company policy. * Motor Vehicle Record (MVR) Check – For roles requiring driving, employment is contingent upon an acceptable driving record. * Legal Eligibility to Work – Candidates must provide proof of legal authorization to work in the US. * Compliance with Company Policies and HIPAA standards – All employees must comply with company policies, including safety, confidentiality, and conduct standards. Physical, Demands, Environmental Conditions, Equipment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. The employee is required to: walk and climb stairs; stand, bend, squat, climb, kneel, and twist on an intermittent or sometimes continuous basis; grasp, push, pull objects such as files, file cabinet drawers, and reach overhead; handle, finger, grasp and feel objects and equipment; reach with hands and arms; be mobile by moving oneself from place to place quickly and easily; repeat various motions with the wrists, hands, and fingers; be able to perform visual activities for (including, but not limited to) administrative and clerical tasks; ability to lift up to 25 lbs.; communicate, receive and exchange ideas, information by means of the spoken and written word; drive vehicles in and around Los Angeles County; be able to enter various buildings that may require climbing stairs; be periodically subjected to outside environmental conditions. The employee may work in proximity to service animals and emotional support animals; use a desktop and/or laptop computer; various office machines. Complete all required forms in personal writing. Work Environment The employee may be in contact with individuals and families in crisis who may be ill, using alcohol and drugs, and who may not be attentive to basic personal hygiene, health and safety practices. The employee may experience a number of unpleasant sensory demands associated with the participants’ use of alcohol and drugs, and lack of personal hygiene. The employee must be ready to respond quickly and effectively to many types of situations, including crisis situations and potentially hostile situations. The noise level in the work environment is usually moderate in an office setting. Sometimes work may become stressful when working under pressure or in crisis intervention. . EEO: HTM (Hope the Mission) provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, HTM complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, placement, promotion, recall, transfer, leaves of absence, compensation and training. HTM will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if HTM is concerned about a conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Find out more about the Fair Chance Act by visiting the California Department of Fair Employment and Housing’s Fair Chance Act webpage. Full time, graveyard shift.

Job DescriptionBenefits: • Employee discounts, • Flexible schedule, • Opportunity for advancement Reports To: Restaurant Manager SPECIFIC RESPONSIBILITIES • Prepares the restaurant and their station for guests., • Greets seated guests., • Answers questions and makes suggestions regarding food and beverage orders., • Writes down the order as the guests order., • Processes orders through the POS terminal., • Prepares side items and completes soup and salad orders., • Delivers drinks from the service bar and food from the kitchen, • Assists in running food orders to guests in other servers stations., • Responds to guest requests and anticipates guest needs throughout the meal., • Responds professionally to guest comments, complaints and questions., • Keeps tables clear of soiled plates, trash and empty glasses., • Presents the guest check and processes payment., • Offers a parting comment to departing guests., • Assists all dining room guests by clearing tableware, re-filling beverages and responding to guest requests., • Verbally acknowledges all guests encountered in restaurant., • Abides by all applicable laws regarding the sale and service of alcoholic beverages., • Follows all health, safety, sanitation and security standards. ESSENTIAL FUNCTIONS Physical Actions: The Server will be required to engage in the following physical action for up to a eight- hour shift: • 35% Standing, • 25% Walking, • 25% Carrying, • 5% Lifting, • 5% Reaching, • 5% CleaningThe Server is required to deliver food and beverage to guests weighing up to twenty pounds. The Server will need to carry soiled plates and glassware weighing up to 10 pounds. The Server may need to retrieve supplies weighing up to 10 pounds from storage shelves. The Server may need to lift glass racks weighing up to thirty pounds. Environmental Exposure: The Server works in the climate controlled environment of the dining rooms, but will be required to walk in and out of the kitchen resulting in exposure to heat and humidity. The Server may be working on the patio and will be exposed to varying weather conditions. The Server works with cleaning chemicals. The Server engages in extensive verbal interaction with guests and employees and is exposed to potentially frustrating situations. The Server must work well with limited supervision. BENEFITS/PERKS • Comprehensive Benefits Package (Medical/Dental/Vision/Life/LTD), • 401(k) retirement plan, • Paid sick leave, • Employee Assistance Plan, • A dynamic and energetic work atmosphere, • Career development

• Job Identification 116954, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 630 E Lambert Rd., Brea, CA, 92821, US (On-site), • Job Schedule Full time Shift: CNC Machinist ' 1st Shift (4:00am-2:30pm) Key Responsibilities: ' Manufacture products in accordance with Engineering drawings ' Adhere to all department and Company quality standards ' Check product dimensions utilizing proper equipment ' Refer any issues regarding the CNC Lathe area to senior leads or supervisors ' Assure compliance to all department and Company quality standards ' Record, as required, all productivity on Company system ' Clean and maintain machinery according to department and Company standards ' Adhere to all Company safety regulations The ability to communicate in English (reading, writing, and speaking) *May be required to participate in and/or conduct regular department trainings , Basic Qualifications ' 3+ years of operation experience with CNC Lathes (such as Okuma, Takisawa, Swiss, Doosan, etc.). ' Ability to learn to set-up a CNC lathe (including work holding, kitting of tools, touching off of tools/establishing offsets, reading of manufacturing drawings, and first article buy-off) on FANUC or OSP (Okuma) controls. ' Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. ' This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

Helix Electric was founded in 1985 and is now one of the nation's largest and most successful electrical contracting companies. Our commitment to empowering people and powering projects is realized by our exceptional team of dedicated and highly skilled experts working together and never settling for good enough. We are proud of the team-oriented and employee-empowered business approach that defines our unique character. Our Superintendent is responsible for the installation and implementation of large-scale electrical projects. DUTIES & SCOPE: • Managing and providing leadership for safety and environmental programs, • Monitoring job costing, quality reporting, forecasting and productivity, • Coordinating all labor, materials, and equipment, • Completing field administration: timesheets, quantity reports, purchases, and the job diaries, • Organizing and coordinating all subcontractor activities, • Implementing and monitoring the construction plan; including scheduling and logistics, • Supervising, mentoring, and developing field personnel (15+ electricians), • Participating in all field work activities and willing to work with tools when necessary, • Journeyman Trade Certification in a related Construction trade will be considered an asset, • A proven track record of delivering safe projects on schedule and within budget, • Excellent organizational skills and attention to detail with the ability to perform a variety of tasks under multiple deadlines in a fast-paced environment, • Demonstrated leadership skills, • Strong communication and interpersonal skills, • Proficient in MS Office Suite, • Excellent knowledge of the Building Codes, • Job requires working in all elements, depending on job location, time of year, heat, cold, rain, snow., • Must be able to utilize construction site sanitary facilities (Porta-Johns)., • Employee's personal weight and personal tools cannot exceed weight limit of ladder (Class 1-250 lbs., Class 1A-300 lbs.)., • Wear personal protective equipment (hard hat, safety glasses, and gloves always), respirator when required., • Climbing ladders and steep stairs, crawling, standing, stooping, bending, crouching, kneeling, sitting, reaching, able to routinely lift heavy objects more than 50 pounds and pushing and pulling of objects is required. The starting base pay for this role is between USD $125,000.00 and $150,000.00 per year. The actual base is dependent upon many factors, such as: location, training, transferable skills, work experience, business needs and market demands. The base pay range is subject to change and may be modified in the future. The role may also be eligible for bonus and benefits. Helix Electric provides a comprehensive benefits package that includes the following: • Medical Plans, • Dental Plans, • Vision Plan, • Life Insurance, • Disability Insurance, • Accident Insurance, • Critical Illness Insurance, • Hospital Insurance, • Pet insurance, • 401(k) Plan with Match, • Employee Discount Program through PerkSpot, • Tax Savings Accounts - FSA, HSA, DCFSA and CSA, • Tuition Reimbursement, • Scholarships Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

• Job Identification 116712, • Job Category Operations, • Posting Date 03/19/2026, 03:12 PM, • Locations 800 S State College, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time, • Remote Work Schedule Availability? None This position must follow Fullerton specifications and all safety precautions to heat treat and processing. Under the direction of supervisory personnel, interprets process specifications, work orders, written, and verbal instructions of all processing and applicable safety procedures, other than those pertaining directly to electroplating and heat treat. This position must follow of Fullerton specifications and all safety precautions to heat treat and processing. • Perform process operations in accordance with applicable specifications, work order, written, or verbal instructions., • Makes additions and new solution make-ups as required., • Inter-department moves of production work orders as required., • May be used as a training position for Heat Treat or Plating., • Adheres to current safety code and cleans workstation and equipment before completing shift or as required., • Keep log on all work processed and maintains S.P.C. charts where applicable., • May inspect/approve parts prior to moving on to the next operation per procedures., • Receives training from experienced operators in department. Keeps a log on all training until employee reaches a level three., • Parts to be lifted and/or transported may weigh up to 30 lbs., • Train other operators as required, • Keeps work area clean, safe and in an orderly fashion on a daily basis., • High school diploma or GED (Preferred.), • Working knowledge in manufacturing and quality processes and procedures., • Ability to read and interpret blueprints, work instructions and policies and procedures., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • Must be able to lift/move 30 lbs. (may not exceed per EHS policies)., • Able to work in extreme hot environment., • Must be able to stand for long periods of time., • Must be able to monitor furnace and verify instrumentation. The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $16.79 to $26.70. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

Design a career and build your future... Because it matters! Onsite Representative / QAQC Inspector - Heavy Civil McMillen, Inc. is seeking a highly skilled Onsite Representative / QAQC Inspector - Heavy Civil to join our Construction Management - Heavy Civil team to support our field operations for water resource projects. This individual will be responsible for monitoring construction activities, ensuring compliance with project specifications, and maintaining the highest standards of quality and safety. All Construction Division offers of employment are contingent upon the successful completion of a background check and drug screen. In accordance with client requirements, security clearance is required and is determined based on background check results. Who we are: McMillen, Inc. designs and builds solutions that shape the future of water resources. As an employee-owned firm, we take pride in every project because we know our work truly matters. Our people thrive on solving complex challenges, pushing boundaries, and refining their craft. We don't look for the complacent or the comfortable. We seek problem solvers, innovators, and experts who are always striving to be better. We support continuous learning, cutting-edge technology, and a balanced work-life environment so our employees can build careers they're proud of. We are focused in the dams, energy, fisheries, natural resources, and infrastructure markets. With staff across the United States, Canada, Europe, and beyond, we bring global best practices to our clients. Our people integrate engineering, environmental, and construction expertise to deliver practical, results-driven outcomes. From concept to completion, projects are guided through feasibility studies, permitting, design, construction, and commissioning, ensuring technical precision and real-world functionality. Responsibilities: • Implement Quality Control practices and procedures., • Ensure all work is in conformance with the contractual requirements., • Verify all material incorporated into the project conforms to all submittals, project specifications and drawings., • Understand and execute the required testing procedures in conformance with the contract documents and industry standards., • Create/Prepare outgoing correspondence to the clients, subcontractors, and other outside entities, ensuring accuracy, quality and professionalism of work., • Monitor, document and track all Quality Control documents including but not limited to Quality Control Daily Reports, Testing and Inspection Reports, Preparatory/Initial Meetings, and other project specific document management/tracking requirements., • Schedule and review all special inspection and material testing performed by third parties., • Serve as the primary onsite representative for the owner during construction., • Conduct daily site inspections to verify compliance with design plans, specifications, permits, and applicable codes., • Monitor construction activities including grading, erosion control, stormwater management, pipe installation, pump stations, water/wastewater infrastructure, and other related systems., • Document field conditions and maintain detailed daily inspection reports, photos, and records., • Coordinate with contractors, clients, regulatory agencies, and design engineers to resolve field issues., • Review and verify contractor submittals, test reports, and materials for compliance with project requirements., • Perform QAQC checks on workmanship and materials; identify and document deficiencies or non-conformances., • Participate in project meetings and communicate effectively with project stakeholders., • Bachelor's degree is highly desired in the related fields of Construction Management or Engineering., • Minimum of 5 years' heavy civil experience in a QA/QC capacity., • Working knowledge of water resource construction techniques and QAQC procedures., • Familiarity with local/state/federal environmental and safety regulations., • Excellent attention to detail and organizational skills., • Strong communication and interpersonal skills., • Proficiency in Microsoft Office and field reporting software (e.g., e-Builder, Procore, etc.)., • OSHA 30 preferred., • Regular, predictable attendance is required., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The inability to cope with a stressful work environment does not constitute a protected disability., • While performing the duties of this job, the employee is frequently required to sit. The employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear., • The employee must occasionally lift and/or move up to 25 pounds., • Must be able to travel with luggage and be able to transport materials and personal overnight supplies., • Pay Range: $140,000 - 180,000 (DOE) Visa sponsorship, including renewal during employment, will not be provided for this position. No recruiters, please. Equal Opportunity Employer, including disabled and veterans. ___

Design a career and build your future... Because it matters! Senior Project Manager/Engineer - Civil McMillen, Inc. is seeking a highly skilled Senior Project Manager/Engineer - Civil with 15-20 years of experience focused in water resource-related work. Who we are: McMillen, Inc. designs and builds solutions that shape the future of water resources. As an employee-owned firm, we take pride in every project because we know our work truly matters. Our people thrive on solving complex challenges, pushing boundaries, and refining their craft. We don't look for the complacent or the comfortable. We seek problem solvers, innovators, and experts who are always striving to be better. We support continuous learning, cutting-edge technology, and a balanced work-life environment so our employees can build careers they're proud of. We are focused in the dams, energy, fisheries, natural resources, and infrastructure markets. With staff across the United States, Canada, Europe, and beyond, we bring global best practices to our clients. Our people integrate engineering, environmental, and construction expertise to deliver practical, results-driven outcomes. From concept to completion, projects are guided through feasibility studies, permitting, design, construction, and commissioning, ensuring technical precision and real-world functionality. Responsibilities: • Follow safe work practices and adhere to company guidelines for planning and executing work in a safe manner., • Work in conjunction with engineers, geologists, and scientists to solve project challenges, performing design calculations as required., • Support dam safety engineering, by supporting the multi-disciplinary needs of the dam safety programs., • Multi-task across various disciplines and locations in support of dam and other hydroelectric specific project work., • Communicate professionally and effectively with a variety of subject-matter experts and project contributors in a collaborative team environment., • Assist with feasibility studies by conducting research to assess challenges and develop solutions., • Conduct field inspections; observe and participate in field exploration and testing programs; and perform site characterizations and evaluate geotechnical hazards., • Assist in the selection of criteria for planning, design, and construction of dams, tunnels, foundations, slopes, and earth-retaining structures., • Assess subsurface conditions, including soil and rock properties and geomechanical conditions, including review and interpretation of field maps, field logs, test data, and other field documentation. Evaluate field and laboratory test data and develop parameters for use in technical analyses., • Conduct numerical analysis using programs such as DIPS, UNWEDGE, SWEDGE, UDEC, Phase2, Rocscience SLIDE.., • Prepare technical reports including geotechnical data reports, geotechnical baseline reports, field reports, technical memoranda, computation packages, feasibility reports, design and evaluation reports, construction drawings, and specifications., • General knowledge of seismic analyses., • Provide field engineering support for projects during construction., • Participate in professional development and training activities., • Manage projects including client expectations and project scope, schedule, and budgets., • Project and Task Management effectively manage multi-discipline teams for hydroelectric and dam projects., • Regular, predictable attendance is required., • Ability to get along and work effectively with others., • BS in Civil Engineering from an accredited university required (MS with a civil focus preferred)., • Professional Engineer registration required., • 10+ years of experience related to geotechnical analysis and design and/or dam safety engineering., • Skill in reading, interpreting and communicating contract documents, plans and specifications., • Knowledge of FERC Guidelines preferred., • Knowledge of the application of engineering and construction related to dam and hydro infrastructure., • Strong interpersonal and organizational skills, with the ability to convey technical information through written and verbal communication (English)., • Project management experience., • Ability to work in a team environment, work independently and be self-motivated., • Willing to travel up to 25%., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The inability to cope with a stressful work environment does not constitute a protected disability., • While performing the duties of this job, the employee is frequently required to sit. The employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear., • The employee must occasionally lift and/or move up to 25 pounds., • Must be able to travel with luggage and be able to transport materials and personal overnight supplies., • Pay Range: $138,000 - $250,000 (DOE) Visa sponsorship, including renewal during employment, will not be provided for this position. No recruiters, please. Equal Opportunity Employer, including disabled and veterans. ___

• Job Identification 116973, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 630 E Lambert Rd., Brea, CA, 92821, US (On-site), • Job Schedule Full time We're hiring a Pyrometry Technician, 1st shift, to join our team! $35/hr plus eligibility for annual bonuses. Key Responsibilities: ' Electrical: troubleshooting motors, controls, sensors, relays, PLCs. ' Performed Hydrogen Burnout on Vacuum Furnaces ' Mechanical: bearings, seals, hydraulics, pneumatics, fans, pumps, gearboxes. ' Vacuum systems: leak detection, valve rebuilds, vacuum pump rebuilds (rotary vane, booster, diffusion, cryo). ' Instrumentation: calibration of thermocouples, pressure gauges, flowmeters. ' Preventive Maintenance: following OEM schedules (Ipsen, HeatTech, McLaughlin, Solar, SECO/Warwick, Lindberg, etc.). ' Welding/fabrication: basic TIG/MIG for hot zone or fixture repairs (preferred). ' Reading schematics/blueprints and interpreting maintenance manuals. CMMS (Computerized Maintenance Management System) familiarity for work orders and PM tracking. , Basic Qualifications ' High School Diploma or GED required. ' 3'5 years of maintenance experience in aerospace, heat treating, or heavy industrial environments. ' Hands-on work with vacuum furnaces, atmosphere furnaces, ovens, and support equipment (vacuum pumps, chillers, quench tanks, gas systems). ' Experience maintaining pyrometry systems and performing temperature uniformity surveys (TUS) and system accuracy tests (SAT) per AMS 2750. ' NADCAP heat treat compliance knowledge (AMS 2750). ' AS9100. ' Lockout/Tagout (LOTO), confined space, forklift, manlift certifications. ' Safety training in oxygen/fuel gas handling and high-pressure gas systems. ' Strong troubleshooting and root-cause analysis ability. ' Ability to prioritize urgent breakdowns vs. planned PM. ' Comfortable working off-shift or on-call during furnace downtime/repairs. ' Communication skills for working with operators, engineers, and QA. ' Documentation accuracy ' all repairs and calibrations must meet aerospace audit requirements. Preferred Qualifications ' Technical trade school, apprenticeship, or Associates degree in Industrial Maintenance, Electrical, or Mechanical Technology. ' EPA Section 608 certification (if working with chillers/refrigerants) is a plus. ' 4 years maintaining Ipsen and McLaughlin vacuum furnaces in aerospace. ' Skilled in vacuum pump rebuilds, thermocouple calibration, TUS/SAT prep. ' Familiar with AMS 2750, NADCAP audits, and pyrometry PMs. ' Cross-trained in electrical, mechanical, and instrumentation repair. Physical Requirements: ' Lift up to 50 lbs, climb ladders, work in tight/hot environments. ' Comfortable around high voltage, high temperature, and pressurized systems. ' Use of PPE (respirators, face shields, insulated gear). , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 116946, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 630 E Lambert Rd., Brea, CA, 92821, US (On-site), • Job Schedule Full time We're seeking an Operations Supervisor, 2nd shift, to join our Brea, CA location to manage, direct, and coordinate all activities related to the area to maximize productivity and minimize cost while achieving safety, quality and throughput targets. Key Responsibilities: ' Ensures to run a safe, injury/accident-free workplace. ' Establish the production schedule, manage people, assets, tooling and materials in running the production in most productive fashion; engage actively in potential schedule or requirement changes; ensure and enhance production schedule adherence. ' Manage Key Performance Indicators (KPI's) and other reporting on daily basis to drive performance in all assigned areas; and ensure all production data accuracies. ' Ensure employees are trained on production procedures and practices ' Carry out supervisory responsibilities including interviewing, hiring & training employees; planning, assigning & directing work; evaluating and appraising individual performance; rewarding & disciplining employees; addressing complaints & resolving problems. ' Review variable costs, productivity, earned standard hours and throughput daily and implements effective recovery or corrective actions when targets are not achieve. ' Actively participate Continuous Improvement (CI) projects to increase efficiency, productivity and machine utilization while reducing overall cost.' ' Provide manufacturing expertise if and when problems arise. ' Formulates and maintains highest standards of housekeeping (5S) in all areas assigned. ' Support and improve upon quality initiatives designed to meet plant goals. ' Manage preventative maintenance performed by production employees. ' Stay abreast of technological advancements and process improvements, which may impact production. Other duties as assigned. , Basic Qualifications: ' Bachelor's degree from an accredited institution, or equivalent experience. ' 4+ years Manufacturing experience (aerospace, fasteners, machining backgrounds preferred). ' Supervisory experience leading teams of 40+ people; Performance management skills. ' Analytical skills; Personal accountability; Strong organizational skills. ' Effective verbal and written communication skills with all levels of organization, especially with direct employees. ' Intermediate use of ERP (JDE), MS Word, Excel, Access, Outlook; other PowerBI and productivity tools. ' Quality focused & production driven. ' Must be capable of working effectively with minimal direction and supervision. ' Must possess excellent problem solving, organizational and verbal & written communication skills. ' Solid, overall business acumen and a strong mindset for continuous improvement. ' Attention to detail and an attitude of 100% compliance with all company and regulatory requirements. ' Work requires verbal communication and interpersonal skills. ' Ability to motivate teams to produce quality materials within tight timeframes and simultaneously manage several projects. ' High energy level and ability to work flexible hours. ' Ability to work in a team-oriented environment. ' Strong computer skills (e.g. MS Word, MS Excel, MRP). ' Strong attention to detail. ' Results oriented. ' Process improvement experience is desirable (Six Sigma, Lean Manufacturing). Salary Range: The base pay range for this position in California is $78,600 - $120,000/year. Pay is based on market location and may vary depending on job-related knowledge, skills, and experience. A sign-on payment may be provided as part of the compensation package, in addition to a full range of medical, financial, and/or other benefits, dependent on the position offered. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

Description Shannon & Wilson is an employee-owned consulting firm headquartered in Seattle, Washington. Committed to technical excellence and high-quality service, we provide integrated geotechnical engineering, engineering geology, environmental and natural resource services for clients worldwide. Since 1954, we have delivered comprehensive engineering and environmental solutions for the most challenging infrastructure planning, design, permitting and construction conditions. We are dedicated to improving our communities, preserving the environment and utilizing the most innovative science practices in all our work. Responsibilities: • Perform geotechnical engineering and geological analyses and calculations., • Prepare and write engineering and other reports., • Perform field explorations, collection of samples, geologic reconnaissance, and mapping., • Perform with construction observation on job sites and prepare summary logs and other documentation., • Perform geotechnical lab testing and communicate results., • Interact and communicate with clients, vendors, and staff at all levels., • Support marketing activities, including preparation of cost proposals., • Follow Shannon & Wilson's Quality Assurance policy., • Follow and promote Shannon and Wilson's Health and Safety and Loss Prevention policies., • Masters Degree in Geotechnical Engineering, PhD Degree preferred., • 0 - 6 years of experience in Geotechnical Engineering., • Have obtained or in process of receiving a Engineer-in-Training Certificate, • On track to obtain Professional Engineering (PE) License., • Work experience (and/or coursework) in one or more of the following areas: soil mechanics; rock mechanics; rock and soil slope stability; shallow and deep foundations; tunneling; microtunneling; seismic design; earthquake engineering; and retaining structures. Typically, depending on an applicant's education, experience, other qualifications they possess, if they are a fit for the company and local office culture, and the current business needs, an Entry-Level Geotechnical Engineer typically would be placed at a Shannon & Wilson Professional I, II, III, or IV level. Compensation: Professional I: $68,640 - $91,980 Professional II: $68,640 - $101,880 Professional III: $74,520 - $111,780 Professional IV: $81,120 - $121,680 Shannon & Wilson is committed to providing a comprehensive total rewards package that includes the following benefits: • Employee stock ownership, • Medical, prescription, vision, dental, long-term care and life insurance plans are offered to employees (and their families)., • Pre-tax health and daycare FSA, • Profit sharing and 401(k) plans with annual safe-harbor contributions, • 10 - 20 paid vacation days per year for full-time employees, based on years of experience (prorated for part-time employment), • Sick leave accrues based on state requirements, • 9 paid holidays per year + 1 personal holiday, • Paid volunteer day, • Paid time off for bereavement and jury duty, • Two weeks of paid parental leave, • Lunch & Live wellness webinars and an Employee Assistance Program, • Mentorship Program, • Tuition Reimbursement, • Free parking Shannon & Wilson is an Equal Opportunity EmployerShannon & Wilson participates in the E-Verify program.Please note that non-solicited resumes from external recruitment agencies will not be considered as introductions to our business, unless a preapproved agreement is in place and the external recruitment agency has been engaged to work on this specific vacancy.

Design a career and build your future... Because it matters! Project Engineer - Civil/Hydrology and Hydraulics McMillen, Inc. is seeking a highly skilled Project Engineer - Civil/Hydrology and Hydraulics 6+ years focused on water resources, dam safety, and hydroelectric-related engineering. Who we are: McMillen, Inc. designs and builds solutions that shape the future of water resources. As an employee-owned firm, we take pride in every project because we know our work truly matters. Our people thrive on solving complex challenges, pushing boundaries, and refining their craft. We don't look for the complacent or the comfortable. We seek problem solvers, innovators, and experts who are always striving to be better. We support continuous learning, cutting-edge technology, and a balanced work-life environment so our employees can build careers they're proud of. We are focused in the dams, energy, fisheries, natural resources, and infrastructure markets. With staff across the United States, Canada, Europe, and beyond, we bring global best practices to our clients. Our people integrate engineering, environmental, and construction expertise to deliver practical, results-driven outcomes. From concept to completion, projects are guided through feasibility studies, permitting, design, construction, and commissioning, ensuring technical precision and real-world functionality. Responsibilities: • Follow safe work practices and adhere to company guidelines for planning and executing work in a safe manner., • Work in conjunction with engineers, geologists, hydrologists, and scientists to solve project challenges, performing design calculations and technical analyses as required., • Perform hydrologic and hydraulic analyses in support of dam safety and hydroelectric projects., • Prepare civil design for hydraulic structures; work with Design Technology group to develop engineering plan sets., • Utilize hydrologic and hydraulic modeling tools such as HEC-HMS, HEC-RAS (1D/2D), HEC-ResSim, FLOW3D or similar industry-standard software., • Multi-task across various disciplines and locations in support of dam, fisheries and hydroelectric-specific project work., • Communicate professionally and effectively with a variety of subject-matter experts and project contributors in a collaborative team environment., • Prepare technical deliverables including civil and hydrologic data reports and construction specifications., • Manage projects tasks by maintaining client expectations and overseeing scope, schedule, and budgets., • Mentor junior engineers in a respectful, collaborative manner that promotes professional growth and positive team culture., • Regular, predictable attendance is required., • Ability to get along and work effectively with others., • BS in Civil Engineering from an accredited university required (MS with a civil or water resources focus preferred)., • Professional Engineer (PE) registration required., • 6+ years of experience in water resources engineering with emphasis on design, hydrology and hydraulic engineering., • Demonstrated experience with hydrologic and hydraulic analyses related to dams, reservoirs, spillways, and hydroelectric facilities., • Demonstrated experience with civil design of hydraulic structures, such as diversions, spillways, fish screens, penstocks, and energy dissipation basins., • Strong understanding of engineering practices related to dams, spillways, reservoirs, and hydro infrastructure., • Ability to read, interpret, and communicate contract documents, plans, and specifications., • Experience preparing and reviewing technical reports and design documentation for regulatory and client review., • Strong interpersonal, organizational, and communication skills, with the ability to clearly convey complex technical information in written and verbal English., • Proven project management experience., • Ability to work independently, collaboratively, and in a fast-paced, multi-disciplinary environment., • Willingness to travel up to 25%., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The inability to cope with a stressful work environment does not constitute a protected disability., • While performing the duties of this job, the employee is frequently required to sit. The employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear., • The employee must occasionally lift and/or move up to 25 pounds., • Must be able to travel with luggage and be able to transport materials and personal overnight supplies., • Pay Range: $96,000 - $145,000 (DOE) Visa sponsorship, including renewal during employment, will not be provided for this position. No recruiters, please. Equal Opportunity Employer, including disabled and veterans. ___

• Job Identification 117004, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 1425 Acacia Ave, Fullerton, CA, 92831, US (On-site), • Job Schedule Part time ' Starts at $26/hr Position Overview: ' The intern will assist cross-functional teams including manufacturing, quality, engineering, planning, and supply chain while developing practical skills in a regulated, fast-paced environment. Key Responsibilities: ' Support manufacturing operations related to machining, deburring, inspection, and assembly of metal fittings ' Assist with data collection, reporting, and basic analysis related to production efficiency, scrap, rework, and throughput. ' Help maintain accurate production documentation in accordance with aerospace quality standards (AS9100, ISO, etc.) ' Shadow and assist supervisors, engineers, and leads with process improvements and workflow optimization ' Support inventory tracking, material flow, and basic scheduling activities ' Participate in safety initiatives and comply with all EH&S requirements ' Assist with continuous improvement projects (5S, Lean, standard work documentation) ' Perform administrative and operational support tasks as assigned Learning Opportunities: ' Exposure to CNC machining and metal manufacturing processes ' Understanding aerospace quality and compliance requirements ' Hands-on experience in a regulated manufacturing environment ' Introduction to production planning, quality assurance, and supply chain operations Professional development through mentorship and real-world projects , Basic Qualifications: ' Currently enrolled in or recently completed a program in Engineering, Manufacturing, Operations, Business, Supply Chain, or a related field ' Strong interest in aerospace manufacturing and metal products ' Basic proficiency in Microsoft Excel, Word, and Outlook ' Ability to follow instructions, procedures, and safety requirements ' Strong attention to detail and willingness to learn ' Familiarity with Lean manufacturing or continuous improvement concepts ' Interest in pursuing a career in aerospace, manufacturing, or operations Physical Requirements: ' Ability to work in a manufacturing environment with exposure to noise, machinery, and production equipment ' Ability to stand, walk, and occasionally lift up to 25 lbs, with reasonable accommodations required by law Must comply with all company safety and PPE requirements ' , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 116947, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 1425 Acacia Ave, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time Shift: Processing Associate' 2nd shift Position Overview: As a Processing Associate, you'll be part of our team located in Fullerton, CA. Key Responsibilities: ' Apply coatings and paints to aerospace parts using spray equipment or manual techniques. ' Operate sandblasting equipment to clean, roughen, or prepare surfaces for coating. ' Prepare parts for finishing by masking and unmasking components according to work instructions. ' Ensure uniform and defect-free finishes by carefully following process guidelines. ' Read and interpret blueprints, work orders, and technical specifications to determine finishing requirements. ' Inspect finished parts for defects and ensure compliance with aerospace quality standards. ' Maintain and clean tools, equipment, and work areas to ensure safe and efficient operations. ' Follow safety procedures and properly handle hazardous materials, including paints and solvents. Complete production logs and documentation as required. , Basic Qualifications • Bachelor's degree from an accredited university, • Minimum of 3 years in learning, development and training., • Proficiency in using spray painting equipment and sandblasting tools., • Ability to follow detailed work instructions and quality standards., • Strong attention to detail and ability to detect surface imperfections., • Knowledge of safety procedures related to handling coatings, chemicals, and protective equipment., • Ability to work independently and as part of a team in a fast-paced environment. Preferred Qualifications • Experience in L&D in a manufacturing setting. ' Physical ability to stand for long periods, lift up to 20 lbs., and perform repetitive motions. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

Design a career and build your future... Because it matters! Senior Fire Protection Project Manager/Engineer McMillen, Inc. is seeking a highly skilled Senior Fire Protection Project Manager/Engineer who will oversee projects from concept through completion, providing technical expertise, client engagement, and project management leadership. This is a client-facing role, requiring strong communication skills, the ability to build long-term client relationships, and proven experience leading multidisciplinary teams. Who we are: McMillen, Inc. designs and builds solutions that shape the future of water resources. As an employee-owned firm, we take pride in every project because we know our work truly matters. Our people thrive on solving complex challenges, pushing boundaries, and refining their craft. We don't look for the complacent or the comfortable. We seek problem solvers, innovators, and experts who are always striving to be better. We support continuous learning, cutting-edge technology, and a balanced work-life environment so our employees can build careers they're proud of. We are focused in the dams, energy, fisheries, natural resources, and infrastructure markets. With staff across the United States, Canada, Europe, and beyond, we bring global best practices to our clients. Our people integrate engineering, environmental, and construction expertise to deliver practical, results-driven outcomes. From concept to completion, projects are guided through feasibility studies, permitting, design, construction, and commissioning, ensuring technical precision and real-world functionality. Responsibilities: • Lead the planning, design, and execution of complex fire protection engineering projects., • Serve as the primary client interface, cultivating and maintaining strong client relationships., • Manage all phases of project delivery, including scope, budget, schedule, and quality, • Collaborate with internal teams and external stakeholders to ensure project success., • Provide technical leadership in fire protection system design, code compliance, and risk analysis., • Mentor and support junior engineers and project staff., • Bachelor's degree in Fire Protection Engineering, Mechanical Engineering, or related discipline., • 15-18 years of progressive experience in fire protection engineering and project management., • 10 + years of experience as a Project Manager., • Fire Protection Professional Engineering Licensure., • Knowledge of industry standards, building codes, and safety standards such as NFPA, NEC, NESC, UL, UFC and UFGS., • Strong client-facing skills with a track record of cultivating and growing client relationships., • Willingness to travel 10-25% for client and project needs., • Regular, predictable attendance is required., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The inability to cope with a stressful work environment does not constitute a protected disability., • While performing the duties of this job, the employee is frequently required to sit. The employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear., • The employee must occasionally lift and/or move up to 25 pounds., • Must be able to travel with luggage and be able to transport materials and personal overnight supplies., • Pay Range: $140,000 - $230,000 (DOE) Visa sponsorship, including renewal during employment, will not be provided for this position. No recruiters, please. Equal Opportunity Employer, including disabled and veterans. ___

• Job Identification 115560, • Job Category Engineering, • Posting Date 01/21/2026, 04:54 PM, • Locations 3000 W Lomita Blvd., Torrance, CA, 90505, US (On-site), • Job Schedule Full time Responsibilities Perform a variety of engineering assignments in work measurement for the establishment of standards. Conduct analytical studies on engineering proposals to develop and detail processes for product manufacture. Develop cost estimates. Develop and issue production routings to manufacture products to the specifications and standards established by the Engineering groups. • Determine feasibility and method to manufacture new products, whether in-house or from outside source, and estimate cost based on various manufacturing methods., • Determine method of manufacturing which will result in production of product as it was designed., • Confer with Manufacturing and Project Engineer and/or corresponding production personnel to determine the method of manufacturing products in the most efficient manner versus cost of production, machine capability, machine availability, and skill availability., • Confer with Quality Control to ensure method of manufacturing will result in product consistent with customer and internal quality requirements., • Generate, maintain, and assist in the preparation of product structures, production routings, product BOM, and part information including approvals, equivalent part numbers and cost information in the manufacturing databases., • Edit work order routings to assure work centers, rates, operation codes, and manufacturing sequence is correct and complies with approved methods before release to production., • Investigate, update and/or create production routings to reflect cost saving method of manufacturing., • Review and approve changes to drawings, specifications, and other engineering documents, and apply the changes to the product structures and manufacture process documentation., • Review and evaluate inefficiencies and inconsistencies in actual production methods compared to the planned methods and analyze potential long-term solutions to minimize variation in a cost-effective manner. Update or create routings to reflect cost savings methods of manufacturing., • Assist Manufacturing Engineers to determine production machine rates and standards for inclusion in product structures., • Interact with Project Engineering, Manufacturing, Sales department, and the vendors as needed in the performance of assigned duties., • Participate in ABS Workshops and Kaizen events both within the assigned product group, and in other product groups., • Participate in proactive team effort to achieve departmental and company goals., • Provide leadership to others through example and the sharing of knowledge/skill., • Comply with all safety policies, procedures and practices as it relates to office/production working environments i.e. PPE (Personal Protective Equipment) when entering production environment., • Bachelor's degree in an engineering discipline, • 1+ years of experience in manufacturing and/or engineering, • Employee must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • 2+ years of experience in high volume manufacturing, • Familiarity with fastener manufacturing, • Strong proficiency with MS Office (Excel, PowerPoint, Word, Outlook) and related computer skills, • Advanced skills in MS Excel & Project, able to create pivot tables or macros, and analyze data, • Must be able to read blueprints, and understand basics of measurement techniques and tools, • Exceptional written/oral communication, presentation and interpersonal skills., • Strong organizational skills, ability to manage multiple large projects and interact with all organization levels, • Experience with using systems such as QAD, AS 400, or other MRP system desirable., • Proficient in the use of computer aided design/drafting software (SolidWorks and AutoCAD) The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $67k-$95k. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

Design a career and build your future... Because it matters! Senior Dam Safety Engineer - FERC IC McMillen, Inc. is seeking a highly skilled Senior Dam Safety Engineer - FERC IC to join our team in multiple locations across the United States. We are looking for a licensed Professional Engineer (PE) with a strong background in civil, structural, hydrological, or geotechnical engineering as it relates to FERC dam safety evaluations. This position can be fully remote and the option for flexible working hours is available for the right candidate. This position requires direct collaboration with clients and regulatory agencies, so we are looking for a professional with exceptional client relationships and regulatory experience. If you are passionate about dam safety and eager to contribute to impactful water resource projects, we encourage you to apply. Who we are: McMillen, Inc. designs and builds solutions that shape the future of water resources. As an employee-owned firm, we take pride in every project because we know our work truly matters. Our people thrive on solving complex challenges, pushing boundaries, and refining their craft. We don't look for the complacent or the comfortable. We seek problem solvers, innovators, and experts who are always striving to be better. We support continuous learning, cutting-edge technology, and a balanced work-life environment so our employees can build careers they're proud of. We are focused in the dams, energy, fisheries, natural resources, and infrastructure markets. With staff across the United States, Canada, Europe, and beyond, we bring global best practices to our clients. Our people integrate engineering, environmental, and construction expertise to deliver practical, results-driven outcomes. From concept to completion, projects are guided through feasibility studies, permitting, design, construction, and commissioning, ensuring technical precision and real-world functionality. Responsibilities: • Perform dam safety related work, including FERC Part 12D inspections (both CAs and PIs) and Chief Dam Safety Engineer (CDSE) types dam safety services., • Lead or participate in Potential Failure Modes Analysis (PFMA) and Level 2 Risk Analysis (L2RA) workshops., • Oversee dam safety related hydrological, geotechnical, and structural evaluations of dams, embankments, dykes, and levees., • Write all types of dam safety reports including DSSMRs, O&M Manuals, PSPs, ODSPs, EAPs, and STI documents., • Manage clients, projects, and deliverables., • Provide dam safety training and EAP exercises (functional, tabletop, seminar, etc.) with clients., • Conduct meetings, present findings, provide guidance to clients, regulators, and/or boards., • Lead or support remedial designs for earthfill embankment dams, concrete dams, and various other water-impounding structures., • Mentor junior staff on all aspects of dam safety., • Marketing of professional services, proposal writing, cost estimating, and project scheduling., • B.S. required, in Civil, Structural, or Geotechnical Engineering (MS preferred)., • Active PE License in good standing is required., • 15+ years of engineering consulting experience which includes FERC Part 12D, dam safety evaluations, and dam engineering design and analysis., • Previously performed the role of FERC-approved Independent Consultant or CDSE or be eligible to be approved to perform this role., • Previously performed the role of PMFA/L2RA Facilitator on a FERC-regulated Project., • Has completed the FERC-required Facilitator trainings., • Significant knowledge of federal and state dam safety standards/guidelines., • Excellent verbal and written communication skills, including proposal development., • Knowledge of design software such as AutoCAD, GeoStudio (SLOPE/W, etc.), AllPile, Rocscience, and/or HEC-RAS etc., • Regular, predictable attendance is required., • Pay Range: $165,000 - $250,000 (DOE) Visa sponsorship, including renewal during employment, will not be provided for this position. No recruiters, please. Equal Opportunity Employer, including disabled and veterans. ___

• Job Identification 116801, • Job Category Operations, • Posting Date 04/14/2026, 04:09 PM, • Locations 135 North Unruh Ave., City of Industry, CA, 91744, US (On-site), • Job Schedule Full time Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Born from many well-known and long-standing brands, Howmet Fastening Systems, headquartered in Torrance, California, is the premier designer and manufacturer of aerospace and industrial fasteners, latches, fluid fittings and installation tools. Our products are used nose to tail on commercial and military aircraft, as well as on jet engines, industrial gas turbines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Establishes operational procedures for activities such as verification of incoming and outgoing shipments, handling and disposition of materials, and keeping warehouse inventory current., • Supervision of Material Handlers assigned to manufacturing., • Oversees the inventory control and reporting accuracy for the location, • Collaboratively partner with Planning team for the implementation, integrations, and execution of capacity, • Assists in planning and organizing activities of the material control department to best utilize personnel to achieve short and long-range goals., • Analyze and evaluate inventory and supplier delivery problems and recommend solutions., • Confers with department heads to ensure coordination of warehouse activities with activities of other functions such as production, sales, records control, and purchasing., • Site Import Compliance Specialist and ensures all manufactured finished products and raw materials are effectively managed to meet all US government import laws and regulations., • Provides vendors internal and external with information to ensure compliance to US laws., • Assists in clearing shipments through US Customs by contacting appropriate local staff to obtain needed information., • Provide guidance and oversee accurate preparation of export and shipping documentation for international shipments by personnel at location., • Manages location's compliance with U.S. and foreign export regulations - including ITAR, EAR, OFAC, FTSR and other regulatory agencies. Skills: • Familiarity with manufacturing operations, • Ability to manage a team of hourly Material Specialist in Shipping and Raw Material Handling, • Strong interdepartmental communication and cooperation skills, • Understanding of planning, scheduling, and capacity management concepts To perform the job successfully, an individual should demonstrate the following competencies: Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness. Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently Quantity - Completes work in timely manner; Works quickly. Safety and Security - Awareness and engagement with EHS safety and security guidelines; Reports potentially unsafe conditions ; Uses equipment and materials properly. , Basic Qualifications: • Bachelor's degree required, preferably in Engineering, Business, or Supply Chain, • Minimum of 5 years' experience in warehouse/shipping management and/or Production Control, • Previous people manager experience required, • Employee must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • CPIM (Certificate Production and Inventory Management) a plus, • Previous experience in Aerospace manufacturing setting preferred Benefits/Salary: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $95k - $105k , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

• Job Identification 116964, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 630 E Lambert Rd., Brea, CA, 92821, US (On-site), • Job Schedule Full time Position Overview: As a nut former, you'll be part of our team located in Brea, CA on 1st Shift Key Responsibilities: ' Sets, operates and troubleshoots nut forming machines, as required by demand or direction of supervision ' Keep machines in best operating conditions, including replacing worn fasteners, machine parts or tooling ' Efficiently and effectively maximize the output of the production equipment and produce quality products that meet all expectations ' Produce quality products utilizing Manufacturing drawings, process control documents, training materials, and departmental work instructions. ' Demonstrates the safe use of all shop support equipment necessary to prepare or modify tooling to produce products meeting the customer expectations. ' Trains operators in machine operation and safety practices ' Detects, evaluates and communicates machine/equipment conditions, material anomalies, part / tool drawing discrepancies or other unusual shop floor activities and/or concerns to both maintenance and supervision. ' Gathers materials for production such as: part drawings, tool drawings, production schedules, production requirements, production reports, etc. ' Reports production and set-up in the K-Lite production tracking system Maintains the entire workplace in a safe, clean operating condition on a daily basis. ' , Basic Qualifications: ' 1 year of previous nut forming experience ' Communicates all pertinent and/or necessary information to fellow employees supervision and support teams. Knowledge of all internal forms of measuring devices, such as micrometers, calipers, gages, etc. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 116333, • Job Category Environmental Health and Safety, • Posting Date 02/24/2026, 01:10 AM, • Locations 900 Watson Center Road, Carson, CA, 90745, US (On-site), • Job Schedule Full time We are seeking highly motivated and energetic students for the 2026 summer intern program at Howmet Fastening Systems. The program consists of 10-12 weeks of structured hands-on training involving plant tours, seminars, networking events, and projects selected to add direct value to the business. At the conclusion of the program, interns will present their projects to plant managers, supervisors, and mentors. An internship at Howmet Fastenings Systems will provide an invaluable experience that you can utilize in any roles, and it's Howmet Aerospace's goal to evaluate our interns for potential entry-level openings. This position will report directly to the site's Environmental Health & Safety Manager with daily coaching from the team's engineers and technicians. The Howmet Aerospace Summer Internship Program will include engaging in impactful projects to assist the company and the student's professional development. • Conduct noise monitoring survey and develop a noise reduction plan with deadlines and SPA's to champion, • Develop a training matrix that is computer based, • Continuous improvement opportunities for incident investigations and audits, • Create an online platform for users to take advantage of mobile tablets ADDITIONAL REQUIREMENTS: • Able to work full time, onsite for a minimum of 12 consecutive weeks beginning in May or June 2026, • Able to provide own transportation for position at Carson, California., • Must be enrolled in a bachelor's degree or graduate degree program by the start of employment., • Minimum completion of Sophomore level coursework from an accredited institution., • Currently enrolled in a Bachelor's degree program related to the field of Environmental Health & Safety. (Environmental Health Science, Environmental Health and Safety, Occupational Safety and Health, Industrial Hygiene, Environmental Science and/or Environmental Engineering Technology), • Experience with Microsoft Office Suite (Excel, Word, Teams, etc.), • Must be proficient working in a Microsoft systems environment., • Prior Internship work experience., • Strong verbal and written communication skills

• Job Identification 116997, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 630 E Lambert Rd., Brea, CA, 92821, US (On-site), • Job Schedule Full time Shift: Centerless Grinder Set Up Operator ' 1st Shift Position Overview: The Centerless Grinder Set Up Operator will set-up and operate one Cincinnati #2 OM Center-Less Grinding Machine. While operating the machine the operator will follow the quality policy of 3V Fasteners.'''''''' Key Responsibilities: ' Plan and perform close tolerance set-ups with multiple material types. ' Responsible for training, instructing and setting-up for lower level employees. ' Set-up and operate while no set-ups for others are required. ' Establish proper grinding wheel speeds and stock removal rates for optimum efficiency. ' Identify necessary gages for each job. ' Perform 1st article inspection, referring to the part print, before operating or turning over to another operator ' Actively participates in continuous improvement activities to assist team in meeting daily goals of: Quality and Productivity. ' Maintain a clean and safe work environment. ' Works with minimal supervision to independently perform the job of Set-up Grind Operator. ' Set-up and operate one Cincinnati #2 OM Grinding Machine. ' Maintain high quality standards. ' Read and understand work instructions. ' Completes assigned tasks in a timely manner. ' Completes router, inspection sheet and inputs set-up/production information into LTS production tracking. ' Observes all safety regulation. ' Performs other duties as required. Report any equipment defects, unsafe or hazardous conditions, or material shortages to the supervisor. , Basic Qualifications ' High School Diploma or GED. ' Good communication skills. ' Ability to read and interpret blueprints. ' Experience using Inspection Tools (Micrometer, Caliper, Drop gages, etc.) ' Minimum of 5 years of related experience. Preferred Qualifications: ' Experience with Cincinnati Centerless Grinders. Physical Requirements: ' Visual acuity for detailed work. ' Must be able to lift 50 pounds from floor to waist and waist to floor periodically. ' Must be able to stand for the entire shift. Must be able to work in an un-air conditioned shop environment. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 116781, • Job Category Operations, • Posting Date 04/14/2026, 02:48 AM, • Locations 3000 W Lomita Blvd., Torrance, CA, 90505, US (On-site), • Job Schedule Full time, • Remote Work Schedule Availability? None Job Duties and Responsibilities: The Team Leader assists the Supervisor with ensuring that production of products meets or exceeds efficiency and company quality standards. In addition, the Team Leader, in collaboration with the Supervisor, oversees and/or conducts training of new or existing employees and is responsible for communicating any performance issues with employees in the department to the Supervisor or appropriate management personnel. The Team Leader interprets specifications and job orders to employees, analyzing problems and assigning duties. The Team Leader is responsible for educating and monitoring all employees on all company safety policies and procedures to ensure a safe work environment. • Makes constant checks on production to ensure quality of finished products and maintains surveillance over equipment and machinery and notifies supervisor or maintenance of any issues., • Knowledge on davenports, chuckers, and titanium/aluminum fasteners product, • Establishes or adjusts work instructions and placement of employees to meet production schedules and goals., • Train current and new employees on machinery in applicable areas, including LTV (Lock, Tag and Verify), Human Performance, 5s., • Participates in training and other activities that are designed to make improvements of facilities, equipment, or procedures to improve safety, quality, and efficiency., • Assists in identifying repetitive issues and promoting problem solving to root cause, focused on safety, quality and on time delivery. Perform TPM and 5S audits., • Helps develop Standard Operating Procedures by conducting time studies and evaluating job tasks., • Monitors employees to ensure they are following safety policies and procedures and also maintains a safe work environment for all of our employees and keeps area neat and clean at all times., • Oversees and trains employees, including organizing, prioritizing, and scheduling work assignments. Ensures on-the-job training and safety training are conducted for employees on methods and equipment used., • Fosters a cooperative team-based work environment motivating employees to achieve established goals and growth within the company. The Team Leader is instrumental in assisting the Supervisor with overseeing employees; however, this position is not directly responsible for the performance of the employees in the area. Carries out goals and supervisory functions in accordance with the direction of the Supervisor and the organization's policies and applicable laws. Performs all other assignments, projects and duties as assigned. Knowledge and Skills: • Must have previous machining experience on ACME or multi-spindle machines, • Must have a general understanding of manufacturing and be able to plan and think strategically., • Must have excellent leadership skills, organizational skills, and a positive personality with strong awareness to diversity in the workplace., • Must have knowledge of production and workflow procedures and be familiar with quality control standards necessary to maintain satisfactory levels of production., • Ability to make decisions quickly and develop a plan of action to address issues arising with production changes or issues., • Knowledge of company and departmental organizational structure, policies, procedures, rules, and regulations., • Must possess skills to communicate ideas and instructions clearly and concisely and be able to coordinate effectively with management, other supervisors, employees, and the public., • Ability to instruct employees in a positive manner, motivating employees to achieve established goals while working as a team., • Skill in the use of machinery and equipment in the assigned area preferred., • High School diploma or GED preferred, • A minimum of ten (10) years of experience working in a manufacturing environment or equivalent experience in a supervisory or leadership role. The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $29-$50/hr. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 115891, • Job Category Engineering, • Posting Date 05/04/2026, 07:31 PM, • Locations 3016 W Lomita Blvd, Torrance, CA, 90505, US (On-site), • Job Schedule Full time Howmet Fastening Systems (HFS) is seeking a Senior Manager, Continuous Improvement, Capital Projects and Infrastructure based at our Torrance, California Headquarters, or an alternate Southern California site, with regular travel to sites. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. General Summary: We are seeking a strategic and execution-focused Senior Manager, Continuous Improvement, Capital Projects and Infrastructure to lead and deliver Cost Savings and CAPEX initiatives across our HFS North America Aerospace (NA Aero) manufacturing sites. This role is pivotal in driving operational efficiency, innovation, and growth through the successful execution of capital investments-on time, within budget, and aligned with ROI/payback expectations. You will manage a dynamic portfolio of infrastructure, equipment, and technology projects, ensuring alignment with long-term asset value and strategic goals. This role will serve as the primary leader for the NA Aero Continuous Improvement Program (CIP), driving $20m+ in year-over-year productivity, waste reduction, and operational excellence. The leader will oversee CI governance, track savings delivery against annual targets and ensure strong engagement and accountability from plant leadership teams. The leader will also play a key role in shaping future investments by partnering with operational and cross-functional leaders to identify and scope opportunities that enhance our capabilities in aerospace, fasteners, and precision manufacturing. The scope of this role also includes responsibility for our real estate and footprint strategy, such as engaging with brokers to manage leases and renewals, and supporting sites with utilization and expansion needs. Furthermore, you will oversee the forecasting and tracking of greenhouse gas (GHG) reduction targets and actuals, ensuring capital investments are aligned with environmental impact goals and sustainability commitments. All projects must meet safety, environmental, and regulatory standards, and contribute meaningfully to our competitive positioning. Specific Responsibilities: • Lead full lifecycle delivery of capital projects across North America, from concept and feasibility through design, procurement, installation, and commissioning, while ensuring disciplined execution of scope, schedule, budget, and vendor performance., • Provide strong financial and governance oversight for CAPEX initiatives, including cost tracking, forecasting, variance analysis, and alignment with annual plans and approval requirements., • Drive continuous improvement in capital investment, identifying new opportunities with site leaders, optimizing spend, reducing waste, improving ROI, and strengthening longterm asset value and operational efficiency., • Partner cross-functionally with operations, engineering, finance, procurement, and EHS to align project objectives with broader enterprise strategy., • Develop and maintain comprehensive project documentation including budgets, schedules, risk assessments, and ROI/payback analyses. Identify potential risks and implement mitigation strategies to ensure successful project outcomes., • Lead the NA Aero Continuous Improvement Program (CIP), including annual goalsetting, project pipeline development, and delivery of major productivity and costreduction targets across all sites., • Drive CI engagement and accountability with plant leadership, provide Lean and problemsolving coaching, and ensure each site maintains a prioritized portfolio of improvement initiatives., • Consolidate and validate CI results, report savings and operational impact to senior leadership, and integrate CI priorities with CAPEX strategies to strengthen longterm performance., • Oversee contractor selection and bid processes while managing vendors throughout construction and installation to ensure quality, costeffectiveness, and adherence to project specifications, timelines, and governance requirements, • Oversee real estate and footprint strategy of manufacturing sites, including lease management, broker engagement, and support for site utilization and expansion planning., • Lead forecasting and tracking of greenhouse gas (GHG) reduction targets and actuals, ensuring capital investments align with sustainability goals and environmental impact objectives., • Ensure compliance with all applicable safety, environmental, and regulatory standards throughout each phase of the project lifecycle., • Champion continuous improvement in project execution methodologies, governance practices, and investment strategies. Skills: • Extensive knowledge and experience with lean manufacturing. Must have proven leadership and management skills. Thorough knowledge of complex electronic business enterprise systems required., • Demonstrated experience leading multi-site Continuous Improvement programs, including savings tracking, CI Governance, and deployment of Lean tools, • Proven success delivering single-site and multi-site capital projects with budgets ranging from $500k to $50M., • Familiarity with sustainability metrics and GHG emissions tracking; ability to align capital investments with environmental performance goals., • Ability to work effectively with employees, peers, senior-level leaders, customers and vendor representatives., • Excellent communication, presentation, and persuasion skills. Ability to work independently, prioritizing and completing multiple work assignments in diverse fields with minimal direction. The above statements are intended to describe the general nature of work being performed. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of incumbents in this job classification. Benefits/Salary: • The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401(k) matching program, paid holidays and vacation. The salary range for this position is $140,000-170,000 annually. , Education: • A bachelor's degree in Engineering, Business, or Operations required., • 5+ years of experience managing CAPEX projects in manufacturing environments., • Experience supporting real estate and facilities strategy, including lease management, site utilization, and broker engagement., • Must have excellent communication, presentation, and interpersonal skills., • Familiarity with AS9100, FAA regulations, and defense compliance., • Strong knowledge of aerospace, fasteners, or precision manufacturing industries., • Must be able to prioritize and complete multiple and diverse work assignments with minimal direction and supervision.