Trabajos environmental safety en Houston, TexasCrear alertas

As a Lead Electrical Engineer, you will elevate your career and make a significant impact by leading projects that craft cutting-edge solutions for diverse clients. At Powell, a Lead Electrical Engineer holding a minimum of a bachelor’s degree in electrical engineering, or a related engineering discipline with a focus on power, will be the “technical face” on projects from concept to completion. You will be working with clients to design custom Low and Medium Voltage Switchgear & Control Solutions to meet their technical specifications and quality standards within the constraints of the budget and the schedule. Additionally, a Lead Electrical Engineer stays updated on industry trends, and provides recommendations for process improvements and technological advancements. Finally, you will join a team that fosters a supportive environment, continuous learning and development where your expertise will not only be appreciated but recognized and rewarded. Essential Responsibilities • Independently complete projects to match client specifications and requirements, • Draft electrical construction drawings using AutoCAD in conjunction with our in-house mechanical and wiring teams, • Apply design knowledge to engineer 480V through 5kv Motor Control, and 480V through 38kV Switchgear along with other miscellaneous equipment, • Work with the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project, • Create and validate Bills of Materials for client submittal and approval, • Complete self and peer design reviews to verify accuracy and completeness of designs before issuing projects to Powell’s manufacturing floor for construction, • Mentors engineers in the department, • Provide technical support in client meetings, • Coordinate with purchasing and suppliers to specify & approve component parts and assemblies, • Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule, • Coordinate with the electrical design team, and the mechanical engineering team for the final design and construction package to include wiring diagrams, one-line diagrams, three-line diagrams, control schemes, and mechanical layouts of the project, • Create AC and DC schematics, door component layouts, wiring diagrams, and one-line diagrams for project approval, construction and As-Built’s drawing submittals, • Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project, • Assist fellow production engineers in solving problems on a daily basis, • Adhere to Powell’s policies and procedures, work instructions, ISO policies, Safety Rules and Regulations, • Meet regularly with clients, suppliers and OEMs Minimum Qualifications • BS Degree in Electrical Engineering, Electrical Technology or related area, • Minimum 8-10 years of experience in an Engineering role, • Advanced drafting/ACAD skills, • Advanced proficiency in electrical SWGR design and control schemes., • Advanced proficiency in understanding power system and relay applications as applied to switchgear products Required Experience Is Proportionate With the Selected Job Level • The Engineer level requires a Bachelor’s degree in an engineering discipline and 0-3 years of relevant job related experience, • The Senior Engineer level requires a Bachelor’s degree in an engineering discipline and 4-8 years of relevant job related experience, • The Lead Engineer level requires Bachelor’s degree in an engineering discipline and 7-10 years of relevant job related experience Skills, Abilities & Other Requirements • Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment, • Solid organization, communication, presentation and planning skills, • Experience in carrying out engineering development types of tasks and addressing production issues, • Demonstrated ability to work collaboratively with others in a cross-functional team environment, • Highly self-motivated in working on “first-of-its-kind” projects that require resilience and tenacity, • Strong problem-solving skills, and the ability to troubleshoot complex system-level problems, • Solid understanding of one-line and three-line drawings, control schematics, and point to point wiring diagrams, • Familiarity with power distribution equipment (three phase systems, relays, transformers, control switches, etc.), • Strong understanding of 480V through 38kV electrical distribution and switchgear operation, • Familiar with applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL, • Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product, • Possess a strong customer service commitment, • Proficient at project specification and drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.) Working & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential #LI-KB2 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

Powell Service Technicians are responsible for ensuring the end-to-end safety, quality and performance of Powell equipment across the US and Canada. This includes performing installations, preventative maintenance, and corrective maintenance. The ideal candidate thinks critically, can work well in a team setting, and is a problem solver. Field service technicians are expected to service the west coast, gulf coast south, offshore and east coast service regions. Qualified service technicians are provided safety and technical training with full office support. Once qualified, technicians are assigned a company vehicle, standard tooling, testing equipment, a laptop, phone compensation, and company expense card. Essential Responsibilities • Adhere to Powell’s current safety and quality standards, • Complete all site documentation in a timely manner; including but not limited to, weekly time sheets, signed service and repair order, materials used and report writing., • Provide regular and clear communication regarding work schedule to Field Operations Scheduler and District Service Manager, • Maintain flexible work hours, which will include over time and periodic weekend support, • Must be available to travel up to 85% of the year., • Comply with Powell‘s standard operating procedures, documentation processes, safety processes and protocols., • Coordinate with Powell Project management, customers, vendors, and labor support in a professional and customer-centric manner, • Able to work in different roles from supporting the Manufacturing Department within house fabrication, to overseeing small crews on installation projects., • Switchgear and PCR installations, • DC / AC Switchgear, • Perform performance testing on Powell equipment and components, including but not limited to; insulation testing (megger testing), Ductor, Hi Potential testing, torque tests and mechanical / functional testing., • Perform regular inspections of any issued vehicle or calibrated equipment/tools., • Provide support to services manufacturing group. May consist of construction, installation, wiring and testing., • Duties will include local and domestic travel, PCR installation, switchgear installation, PowlVac breakers, also trouble shooting, testing and repair of mentioned items. Minimum Qualifications • Field service technicians are required to have 4 years as a shop and / or field electrical / breaker technician., • Exhibit basic knowledge of Electrical Industry manufacturing standards. Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear., • Basic knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applications, • Basic knowledge of electrical air and surface creepage clearance requirements., • Basic knowledge in writing accurate and complete test reports, project summaries and has the ability to explain basic anomalies found on a given project. Preferred Qualifications • Basic familiarity with contactor and circuit breaker schematics (Preferred)., • Basic understanding of hi potential testing (Preferred), • Basic understanding of low resistance testing (Preferred)., • Basic working knowledge of mechanical and electrical functional testing of circuit breakers and electrical switchgear (Preferred)., • NICET Level 1 certification (Preferred)., • HUET / Offshore Survival Training (Will be provided if the candidate is not currently certified)., • NFPA 70E Trained (Preferred / Training can be provided)., • OSHA 10 / 30 Trained (Preferred / Training can be provided) Skills, Abilities & Other Requirements • Demonstrate basic knowledge in the design and manufacture of bus and structural modification projects., • Demonstrate knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Basic AC and DC theory., • Ability to assist other senior level technicians with maintenance, repair, installation, upgrades and retro fills on Powell switchgear and power control rooms Working & Environmental Conditions Working Environment The Field Service Technician typically performs duties in an industrial environment. This position requires services both locally and across the Continental US. It is the policy of Powell Service Division to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand, talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. Additional requirements are as follows: Medium physical effort (lifting/moving up to 50 pounds) Have full range of mobility in upper and lower body and be able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time. Work at heights greater than 10’. Work on ladders of all types. Work on scissors and bucket lifts (on occasion). In addition, employees will be required to complete and pass Company and Customer required drug screening, background and employment verification checks, maintaining eligibility throughout employment. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

Powell Global Service is seeking an experienced Applications Engineering Supervisor to lead our Applications Engineering team in Houston, Texas. In this critical leadership role, you will serve as the primary technical and business focal point for Powell’s electrical equipment and field service portfolio. You will partner closely with Sales and Strategic Account teams to drive high-quality bid decisions, optimize technical and commercial strategies, and maximize win rates at target margins. You will lead a team of applications (estimating) engineers, delivering complex technical solutions for medium voltage (MV) and low voltage (LV) electrical distribution equipment, including switchgear, MCCs, E-Houses, and power systems. This position combines hands-on technical leadership, team management, process improvement, and strategic growth initiatives to support the continued expansion of Powell’s Service Division. • Key Responsibilities Act as the primary technical expert and business focal point for Powell’s electrical equipment and Field Service portfolio. • Provide informed technical input to enquiry/bid go/no-go decisions., • Partner with Sales and Strategic Accounts to ensure technically sound, commercially optimized bid strategies that align with company objectives and maximize order win probability at the best possible margins., • Manage the PGS-Houston Applications Engineering resources, balancing strategic tender priorities while maintaining departmental flexibility to handle urgent workloads — with a strong emphasis on quality of wins over quantity of tenders., • Lead, develop, and mentor a team of estimating engineers, including task assignments, performance management, on-the-job training, information management, and supplier/vendor coordination., • Develop and refine standard solutions and processes to drive continuous improvements in cost, quality, and execution efficiency., • Analyze project specifications, drawings, and data sheets to determine material, labor, and equipment requirements for MV and LV electrical distribution systems., • Lead technical initiatives to support division growth, including customer site visits to deliver innovative solutions tailored to customer needs., • Build and maintain strong customer relationships while proactively managing expectations on deliverables. Qualifications • Minimum 5 years of managerial/leadership experience of engineering teams., • Bachelor’s degree in a technical discipline (Electrical Engineering preferred) from an accredited institution, plus 8–10 years of relevant industry experience OR a minimum of 15 years of relevant industry experience without a degree., • Senior-level technical expertise in at least one of the following areas:, • Electrical Equipment Field Service (installation, testing, start-up, and training), • Power Systems, • Electrical System Integration (preferably switchgear and MCC applications), • Strong leadership, mentorship, and problem-solving skills with the ability to guide engineering teams., • Proven ability to thrive in a fast-paced, results-oriented environment., • Excellent verbal and written English communication, interpersonal, and collaboration skills., • Ability to work effectively both independently and in cross-functional teams., • Demonstrated commitment to continuous improvement and the development/use of estimating-related KPIs to track growth, efficiency, and cost performance., • Willingness to travel up to 25%. Required Skills, Knowledge & Experience • In-depth knowledge of Powell equipment, including both current and legacy (previous vintage) product lines., • Strong familiarity with:, • 5/15kV Switchgear, 38kV Switchgear, • Low Voltage and Medium Voltage MCCs, • Power Control Rooms / E-Houses, • Panelboards and Relay Panels, • Experience with field modifications to existing electrical equipment., • Proficiency in reading and interpreting electrical drawings, symbols, wiring diagrams, customer specifications, and applicable industry standards (ANSI, ISO, etc.)., • Practical knowledge of drafting/CAD, design and circuitry, documentation, material ordering, and providing technical support to sales, customers, and shop personnel., • Innovative mindset with a proven ability to improve existing products and processes focusing on quality, delivery, and cost optimization. WORKING & ENVIRONMENTAL CONDITIONS • The employee typically performs duties in a normal office environment. There will be some work in the shop environment and exposure to the elements of our shop., • Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities. The customer sites can be refineries, utility substation yards or even offshore platforms., • It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. #LI-CAB

Powell Service Technicians are responsible for ensuring the end-to-end safety, quality and performance of Powell equipment across the US and Canada. This includes performing installations, preventative maintenance, and corrective maintenance. The ideal candidate thinks critically, can work well in a team setting, and is a problem solver. Field service technicians are expected to service the west coast, gulf coast south, offshore and east coast service regions. Qualified service technicians are provided safety and technical training with full office support. Once qualified, technicians are assigned a company vehicle, standard tooling, testing equipment, a laptop, phone compensation, and company expense card. Essential Responsibilities • Adhere to Powell’s current safety and quality standards, • Complete all site documentation in a timely manner; including but not limited to, weekly time sheets, signed service and repair order, materials used and report writing., • Provide regular and clear communication regarding work schedule to Field Operations Scheduler and District Service Manager, • Maintain flexible work hours, which will include over time and periodic weekend support, • Must be available to travel up to 85% of the year., • Comply with Powell‘s standard operating procedures, documentation processes, safety processes and protocols., • Coordinate with Powell Project management, customers, vendors, and labor support in a professional and customer-centric manner, • Able to work in different roles from supporting the Manufacturing Department within house fabrication, to overseeing small crews on installation projects., • Switchgear and PCR installations, • DC / AC Switchgear, • Perform performance testing on Powell equipment and components, including but not limited to; insulation testing (megger testing), Ductor, Hi Potential testing, torque tests and mechanical / functional testing., • Perform regular inspections of any issued vehicle or calibrated equipment/tools., • Provide support to services manufacturing group. May consist of construction, installation, wiring and testing., • Duties will include local and domestic travel, PCR installation, switchgear installation, PowlVac breakers, also trouble shooting, testing and repair of mentioned items. Minimum Qualifications • Field service technicians are required to have 8 years as a shop and / or field electrical / breaker technician., • Exhibit basic knowledge of Electrical Industry manufacturing standards. Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear., • Basic knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applications, • Basic knowledge of electrical air and surface creepage clearance requirements., • Basic knowledge in writing accurate and complete test reports, project summaries and has the ability to explain basic anomalies found on a given project. Preferred Qualifications • Basic familiarity with contactor and circuit breaker schematics (Preferred)., • Basic understanding of hi potential testing (Preferred), • Basic understanding of low resistance testing (Preferred)., • Basic working knowledge of mechanical and electrical functional testing of circuit breakers and electrical switchgear (Preferred)., • NICET Level 1 certification (Preferred)., • HUET / Offshore Survival Training (Will be provided if the candidate is not currently certified)., • NFPA 70E Trained (Preferred / Training can be provided)., • OSHA 10 / 30 Trained (Preferred / Training can be provided) Skills, Abilities & Other Requirements • Demonstrate basic knowledge in the design and manufacture of bus and structural modification projects., • Demonstrate knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Basic AC and DC theory., • Ability to assist other senior level technicians with maintenance, repair, installation, upgrades and retro fills on Powell switchgear and power control rooms Working & Environmental Conditions Working Environment The Field Service Technician typically performs duties in an industrial environment. This position requires services both locally and across the Continental US. It is the policy of Powell Service Division to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand, talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. Additional requirements are as follows: Medium physical effort (lifting/moving up to 50 pounds) Have full range of mobility in upper and lower body and be able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling and squatting for extended periods of time. Work at heights greater than 10’. Work on ladders of all types. Work on scissors and bucket lifts (on occasion). In addition, employees will be required to complete and pass Company and Customer required drug screening, background and employment verification checks, maintaining eligibility throughout employment. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

As an Electrical Engineer, you will elevate your career and make a significant impact by leading projects that craft cutting-edge solutions for diverse clients. At Powell, an Electrical Engineer holding a minimum of a bachelor’s degree in electrical engineering, or a related engineering discipline with a focus on power, will be the “technical face” on projects from concept to completion. You will be working with clients to design custom Low and Medium Voltage Switchgear & Control Solutions to meet their technical specifications and quality standards within the constraints of the budget and the schedule. Additionally, an Electrical Engineer will learn industry standards and trends. Finally, you will join a team that fosters a supportive environment, continuous learning and development where your expertise will not only be appreciated but recognized and rewarded. Essential Responsibilities • Design standard jobs with guidance to match client specifications and requirements, • Draft electrical construction drawings using AutoCAD in conjunction with our in-house mechanical and wiring teams, • Gain design knowledge to engineer 480V through 5kv Motor Control, and 480V through 38kV Switchgear along with other miscellaneous equipment, • Work with your Supervisor and the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project, • Create and validate Bills of Materials for client submittal and approval per Powell Standards, • Complete self-design reviews to verify accuracy and completeness of designs before issuing projects to Powell’s manufacturing floor for construction, • Gain the ability to provide technical support in client meetings, • Coordinate with purchasing and suppliers to specify & approve component parts and assemblies, • Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule, • Coordinate with the electrical design team, and the mechanical engineering team for the final design and construction package to include wiring diagrams, one-line diagrams, three-line diagrams, control schemes, and mechanical layouts of the project, • Create AC and DC schematics, door component layouts, wiring diagrams, and one-line diagrams for project approval, construction and As-Built’s drawing submittals, • Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project, • Assist fellow production engineers in solving problems on a daily basis, • Adhere to Powell’s policies and procedures, work instructions, ISO policies, Safety Rules and Regulations, • Meet regularly with clients, suppliers and OEMs Minimum Qualifications • BS Degree in Electrical Engineering, Electrical Technology or related area, • Minimum 1-3 years of experience in an Engineering role, • Ability to draft in ACAD, • Proficient with electrical design and circuitry, • Basic understanding of power system and relay applications as applied to products Required Experience Is Proportionate With the Selected Job Level • The Engineer level requires a Bachelor’s degree in an engineering discipline and 0-3 years of relevant job related experience, • The Senior Engineer level requires a Bachelor’s degree in an engineering discipline and 4-8 years of relevant job related experience, • The Lead Engineer level requires Bachelor’s degree in an engineering discipline and 7-10 years of relevant job related experience Skills, Abilities & Other Requirements • Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment, • Solid organization, communication, presentation and planning skills, • Ability to carry out engineering development types of tasks and address production issues, • Demonstrated ability to work collaboratively with others in a cross-functional team environment, • Strong problem-solving skills, and the ability to troubleshoot system-level problems, • Basic understanding of one-line and three-line drawings, control schematics, and point to point wiring diagrams, • Basic understanding to being very proficient with power distribution equipment (three phase systems, relays, transformers, control switches, etc.), • Basic knowledge of 480V through 38kV electrical distribution and switchgear operation, • Able to apply applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL in day-to-day activities, • Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product, • Possess a strong customer service commitment, • Basic understanding to being very proficient at drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.) Working & Environmental Conditions • The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally there may be some work performed in the field with exposure to construction sites or active customer facilities., • It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. #LI-KB2 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. *This role can be remote with travel into sites as needed. Job Summary (includes but is not limited to the following, other duties may be assigned) The Steam Turbine Engineering Specialist III (TE) will be a key player in supporting the inspection and maintenance of our steam turbine fleet, including but not limited to GE D11s, GE A10s, Siemens KNs, and SW BB35/65s. Emphasizing safety, integrity, and accountability, the TE will manage high-quality maintenance, precise outage planning, and risk management against the constraints of time, budget, and market demands. This role is crucial for developing and implementing efficient and effective maintenance strategies for the steam turbines, in line with our core values and expectations. Core Values/Expectations: • Safety: Uphold our commitment to safety above all, actively leading and participating in safety initiatives and ensuring all activities comply with safety standards. • Verifying Capital Part Serial Numbers: Ensure accurate tracking, planning, and forecasting for capital parts and budgets by diligently verifying and documenting serial numbers. • Writing Outage Reports: Consistently produce comprehensive outage reports for every project, regardless of OEM presence, to maintain transparency and accountability. • Creating or Leading Shift Turnover Reports: Take the initiative in producing detailed shift turnover reports, particularly vital when the OEM is not the labor contractor, to ensure seamless transitions and continuity. Responsibilities will include: • Actively promote and lead by example in all aspects of safety, making it a priority in every task and decision. • Manage and support maintenance planning and execution for steam turbines, both remotely and on-site, with a strong emphasis on safety and operational excellence. • Supervise OEM and third-party vendors, ensuring adherence to safety, quality standards, and Calpine’s best interests while emphasizing accurate verification of capital part serial numbers. • Conduct thorough inspections and mechanical maintenance on steam turbines, employing meticulous attention to detail in evaluating condition and performance. • Evaluate vendor-supplied test and inspection data, leveraging this information to make informed decisions on maintenance strategies and repairs. • Offer maintenance and repair recommendations, planning, and scheduling outage scopes with a commitment to creating accurate and timely outage and shift turnover reports. • Liaise with vendors for quotes, selecting services for outage and maintenance scopes, with a focus on cost-effectiveness, quality, and accurate capital part management. • Guide technical teams in performing specialized repairs and maintenance on steam turbines, ensuring knowledge transfer and adherence to safety protocols. • Innovate and improve inspection, testing, and repair techniques for steam turbines, enhancing operational efficiency, reliability, and safety. Job Requirements: • High School Diploma or engineering degree is preferred; consideration given to other degrees based on demonstrated expertise. • Strong functional knowledge of steam turbine inspection, testing, maintenance practices, and safety standards. • Minimum 20 years of experience in a steam turbine maintenance role, with a preference for Siemens, GE, Alstom, Toshiba, and MHI steam turbine expertise. • Self-motivated, independent worker with excellent team collaboration skills. • Commitment to innovation, problem-solving, and continuous learning in line with our core values. • Excellent organizational, communication, and detail-oriented skills. • Must pass drug screening. Preferential Qualifications: • Extensive experience with steam turbine models and technologies. • Background in military, OEM, or Merchant Marine power plant maintenance, with a focus on gas turbines. • More than 7 years of industry experience, particularly in roles that align with our core values. Salary Information: Salary Range: $109,779.21 to $139,968.50 Additional Calpine Information: • Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities., • Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to hrrecruitment@calpine.com. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP _ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description Responsible for performing thorough inspections and related repair on company vehicles. Performs over the road services requiring to rescue buses from other locations while remaining in compliance with FMCSA regulations. JOB SPECIFIC RESPONSIBILITIES: PLEASE LIST BY ORDER OF IMPORTANCE Routine servicing and overhauling of all diesel enginesInspecting the engines and detecting technical malfunctionsSpecializing in repairing and maintaining parts of engine, such as fuel injections systems, emission controls systems, and preventative maintenanceDiagnosing "check engine light" fault codes, aftertreatment engine system, engine misfires, and A/C electrical systemDisassemble and overhaul internal combustion engines, pumps, generators, transmissions, clutches, and differential units.Skilled in diagnosing major electrical and engine components, performing repairs as needed Order necessary parts as needed for tasks being performedInspect and test defective equipment, diagnosing malfunctions using diagnostic software per the manufacturerRewire lights and instrument panel components.Diagnose and replace faulty components such as brakes, wheel-seals, turbos, alternators, transmissions, internal engine adjustments and startersFollow safety standards per FMCSA regulations to remain in complianceFuel and wash buses when requiredRoad test buses to detect malfunctionsMove vehicles within property limits, contigent to safety training Perform over the road service calls with little to no supervisionAbility to work indoors and outdoors (i.e. inclement weather, heat, cold, humidity, etc.)Prioritize and meet deadlinesMaintain the shop clean and organizedExcellent communication skills, both written and verbalOther duties as required EXPERIENCE: Please indicate the type of experience required/preferred for the positionRequired or Preferred:5+ years of job-related experiencerequired.Bilingual- Spanish/ English EDUCATION: Minimum Formal Education: Click on the cell below to see a drop down menu of options for education. Required or Preferred:High school diploma or equivalent required; additional training beyond high schoolrequired. LICENSES and CERTIFICATIONS: Please identify whether certification must be held upon hire or obtained within a designated period.Required or Preferred:CDLPerferredDiesel Technical Certification required.ASE Certificationpreferred. PHYSICAL DEMANDS: Heavy - Exerting 60-100 lbs. occasionally, 25-60 lbs. frequently, or up to 10-20 constantly.Job DemandsFrequencyBrief Description of Job DemandsFor each item, click on the relative Frequency cell to indicate the frequency of each physical demand.BendingFrequently - 1/3 - 2/3 of the time CarryingFrequently - 1/3 - 2/3 of the time ClimbingFrequently - 1/3 - 2/3 of the time CrouchingFrequently - 1/3 - 2/3 of the time Fine Dexterity (skill/adroitness with hands; ex typing, administering shots, etc.)Occasionally-Up to 1/3 of time Foot Control (manipulation of pedals, controls, equipment, etc. with feet)Occasionally-Up to 1/3 of time HandlingFrequently - 1/3 - 2/3 of the time Hearing (ability to interpret and differentiate between sound, etc.)Constantly - 2/3 or more of the time KneelingRarely - Less than 1 hour/week Lifting/ExertingFrequently - 1/3 - 2/3 of the time Pushing/PullingFrequently - 1/3 - 2/3 of the time ReachingFrequently - 1/3 - 2/3 of the time SittingRarely - Less than 1 hour/week StandingOccasionally-Up to 1/3 of time Talking (ability to speak coherently and be understood by others)Occasionally-Up to 1/3 of time TwistingOccasionally-Up to 1/3 of time Vision (ability to differentiate between color, to determine distance, depth perception, etc.)Constantly - 2/3 or more of the time Walking/Moving (from one location to another to perform work)Frequently - 1/3 - 2/3 of the time NON - PHYSICAL DEMANDS: Job DemandsFrequencyBrief Description of Non - Physical Job DemandsFor each item, click on the relative Frequency cell to indicate the frequency of each non - physical demand.Stress Demands - Person in the position is responsible for maintaining stable performance under pressure or opposition, and handling stress in a manner that is acceptable to others and to the organization.Occasionally-Up to 1/3 of time Time Pressures – Person in the position is responsible for producing work/outcomes relatively quickly; within a specified timeframe.Occasionally-Up to 1/3 of time Frequent Change of Tasks – Person in the position is responsible for reprioritizing workload based on the needs of the organization.Frequently - 1/3 - 2/3 of the time Performing multiple tasks simultaneously - Person in the position is responsible for working on a variety of different tasks simultaneously, while maintaining the quality of the work.Frequently - 1/3 - 2/3 of the time Tedious or exacting work – Person in the position is responsible for producing work that is routine and/or repetitious in nature.Frequently - 1/3 - 2/3 of the time Noisy/Distracting Environment – Person in the position will be subject to noise and distraction throughout the workday.Occasionally-Up to 1/3 of time Variable Schedule/Overtime – Person in the position is required to work evenings and/or weekends, or is required to work overtime.Occasionally-Up to 1/3 of time Other (please describe) ENVIRONMENTAL CONDITIONS: Click on the cell below each heading to see a drop down menu of options of Environmental Factors. Environmental / Health and Safety ConcernsFrequencyBrief Description of Working ConditionsWorking conditions are relatively free from unpleasant environmental conditions.Frequently - 1/3 - 2/3 of the time Extreme temperature (heat, cold, extreme temperature changes).Frequently - 1/3 - 2/3 of the time Wetness and/or humidity (bodily discomfort from moisture).Frequently - 1/3 - 2/3 of the time Respiratory Hazards (fumes, gases, chemicals, radiation, dust/mites and dirt).Constantly - 2/3 or more of the time Noise and Vibration (where earplugs would be recommended).Constantly - 2/3 or more of the time Working conditions are relatively free from hazards.Rarely - Less than 1 hour/week Mechanical HazardsOccasionally-Up to 1/3 of time Toxic/Chemical HazardsRarely - Less than 1 hour/week Fire HazardsRarely - Less than 1 hour/week

Job Description Dredgit is hiring Shoremen for an upcoming dredging project at Clearwater in Augusta, Georgia. This position provides shore support for dredging operations, including shorewatch duties and moving and positioning blocks with a forklift. We’re looking for dependable, mechanically inclined people who pay attention, take initiative, and can work outdoors during 12-hour shifts. Responsibilities • Perform shorewatch duties, maintaining visual observation of dredge operations and radio communication with the dredge operator., • Stay alert to unsafe conditions or signs of trouble and notify the operator or supervisor promptly., • Safely operate a forklift to move and position blocks as directed., • Inspect the forklift before use and report equipment problems., • Assist with basic equipment maintenance and other shore support tasks using hand tools and power tools., • Maintain a clean, organized work area and follow all project safety procedures. Qualifications • Previous forklift operating experience., • Mechanical aptitude and experience using hand tools and power tools., • Ability to remain attentive during extended periods of observation., • Ability to learn procedures, retain instructions, and complete routine tasks independently after training., • Clear radio communication and good judgment about when to report problems or request assistance., • Dependable attendance, a strong work ethic, and willingness to help the crew., • Ability to work outdoors during 12-hour shifts in varying weather conditions., • Dredging, construction, equipment maintenance, agricultural, or similar hands-on experience preferred. Qualifications • Mechanical aptitude and practical experience safely using hand tools and power tools., • Dependable attendance, a strong work ethic, and a willingness to learn., • Ability to remain alert and focused during extended periods of equipment monitoring., • Ability to learn procedures, retain instructions, and handle routine tasks independently after training., • Good judgment when troubleshooting basic problems and recognizing when assistance is needed., • Ability to communicate clearly by radio and follow operating instructions., • Ability to work outdoors during 12-hour shifts in varying weather conditions., • Dredging, marine, equipment maintenance, agricultural, or similar hands-on experience preferred. Requirements • Valid driver's license, • Willing and able to travel extensively and stay out of town for extended periods, • Able to work long shifts outdoors in heat, cold, rain and other jobsite conditions, • Able to lift and carry up to 50 lbs. and perform physical work including climbing, bending, pulling and standing for extended periods, • Comfortable working on and around water, boats and heavy equipment. Travel This position requires travel. Dredgit provides: • Housing, • $40/day per diem, • Full benefits (medical, dental, vision, 401k, PTO) About Dredgit Dredgit is a privately held marine and heavy civil contractor performing dredging and infrastructure work across the Gulf Coast and beyond. We promote from within and develop skilled operators from hardworking laborers. If you want real work, real responsibility, and real opportunity — apply. Dredgit Corporation is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to any status protected by applicable law. \nCompany Description Founded in 2011, Dredgit® Corporation is a family-owned, self-perform specialty contractor based in Houston, Texas. We provide critical infrastructure maintenance services through four operating divisions: Marine, Environmental, Civil and Industrial. Over the past 11 years, we have safely executed a variety of challenging projects in some tough environments. Our customers include the U.S. Army Corps of Engineers, U.S. Coast Guard, state/local governments, and large, well-known industrial companies in the pulp and paper, petrochemical, refining, liquified natural gas, and power generation industries. Founded in 2011, Dredgit® Corporation is a family-owned, self-perform specialty contractor based in Houston, Texas. We provide critical infrastructure maintenance services through four operating divisions: Marine, Environmental, Civil and Industrial.\r\n\r\nOver the past 11 years, we have safely executed a variety of challenging projects in some tough environments. Our customers include the U.S. Army Corps of Engineers, U.S. Coast Guard, state/local governments, and large, well-known industrial companies in the pulp and paper, petrochemical, refining, liquified natural gas, and power generation industries.

Job Description General Construction Laborers Needed ASAP About Beyer Group At Beyer Group, our teams provide essential services that support the communities where we live and work. With decades of experience across infrastructure, environmental services, and property maintenance, we take pride in delivering quality, reliable work for our clients. Job Overview We’re looking for General Construction Laborers to join our field operations team in the Houston, TX area. This is a great opportunity for someone who enjoys hands-on, outdoor work and wants to build experience in a field environment. You’ll support job-site operations by loading and moving materials, cleaning and maintaining work areas, installing and removing materials, and assisting with other general labor tasks. No prior field experience is required, and on-the-job training is provided. This is a full-time, non-exempt position that may require overtime, weekend, or holiday work depending on project needs. The starting pay is $17.00 per hour. Yearly bonus opportunities are also available if company goals are met. Why Join Beyer Group? • Competitive Pay and Full Benefit Package: Includes overtime opportunities, generous health, disability, and life coverage, and 401(k) with company match., • Work Life Balance: Home most evenings., • Hands-On Experience: Build your skills operating equipment in an active field environment., • Variety in Your Work: Support different projects and jobsite needs while working with heavy equipment and materials., • Be Part of an Established Team: Join a company with decades of experience serving the communities where we work and building sustainable communities., • Career Growth Opportunities: Learn and grow with a company who cares about the development of their team members. What You’ll Do • Move Materials: Load, unload, lift, and move materials and supplies around job sites., • Job-Site Cleanup: Remove trash and debris and assist with cleaning streets and work areas using shovels and other equipment., • Installation Support: Assist with installing and removing filter fabric fencing and other materials as needed., • Maintain the Job Site: Help keep work areas clean, safe, and organized., • Follow Safety Procedures: Follow company safety guidelines, attend required meetings, and report unsafe conditions or incidents. What We’re Looking For • Reliable transportation to and from work and be able to report to work by 6:00 AM., • Experience in general labor, construction, or a related field is a plus, but not required., • Able to perform physical work, including standing, walking, bending, lifting, and moving throughout the workday., • Able to lift or move 50 lbs. or more with or without reasonable accommodation., • Comfortable working outdoors in varying weather conditions and around noise, vibration, dust, fumes, and other typical job-site conditions., • Willing to learn and take on different tasks as needed., • Ability to work weekends and holidays when needed. The Beyer Group is an Equal Opportunity Employer. Equal opportunity is a sound and just concept to which we are firmly bound. We will not engage in discrimination against, or harassment of, any person employed or seeking employment with us on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, non-disqualifying disability, status as a protected veteran or other characteristics protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. VEVRAA compliant – priority referral Protected Veterans requested.

Job Description We are seeking a reliable, experienced Auto Mechanic to inspect, diagnose, repair suspension related work. The ideal candidate possesses strong problem-solving skills, proficiency with modern diagnostic tools and commitment to quality workmanship and shop safety • Diagnostics & Troubleshooting: Perform mechanical and computerized system diagnostics to identify vehicle issues, fault codes, and performance glitches using specialized diagnostic software and scanners., • Maintenance & Service: Execute routine maintenance tasks including filter changes, battery testing, and tune-ups according to manufacturer specifications., • Repairs & Replacements: Repair or replace defective components including brake systems, steering/suspension, and HVAC systems., • Vehicle Inspection: Conduct multi-point safety inspections on incoming vehicles to identify potential hazards, wear-and-tear items, and preventative service needs., • Customer Communication & Reporting: Provide accurate estimates of repair time and material costs to service advisors. Explain technical issues clearly and document all performed work accurately on repair orders., • Safety & Compliance: Maintain a clean, organized, and safe work station. Adhere strictly to OSHA standards, shop safety rules, and environmental regulations regarding fluid disposal., • Required Qualifications & Experience, • Education: High school diploma or GED equivalent; completion of a vocational/technical training program in automotive technology preferred., • Experience: 2+ years of professional hands-on automotive repair experience in a dealership or independent shop setting., • Driver's License: Valid driver’s license with a clean driving record (required to test-drive vehicles)., • Tools: Possession of a standard personal mechanic tool set (shop provides heavy equipment and specialized diagnostic machinery). Preferred Certifications & Skills • ASE Certifications: Current ASE (Automotive Service Excellence) certifications (e.g., A1-A8) are highly preferred., • Technical Proficiency: Experience with modern engine management systems, hybrid/EV systems, and advanced driver-assistance systems (ADAS)., • Soft Skills: Strong time-management skills, attention to detail, and team-oriented mindset. Physical Requirements & Working Conditions • Ability to lift, carry, and maneuver up to 50–70 lbs independently., • Ability to bend, kneel, balance, reach, and work overhead or in cramped spaces for extended periods., • Exposure to loud noise, automotive chemicals, fumes, and varying shop temperature

Line of Business: Service & Support About Us: Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What you will be doing: Provide 24/7 Remote Monitoring, Operation, and Control of Plant Processes Provide continuous remote monitoring, operation, and control of cement and grinding plants across the United States and Canada from Heidelberg Materials’ centralized HROC operations center in Irving, TX Actively optimize cement manufacturing processes and assigned plant equipment using advanced control systems, automation platforms, and real-time data interfaces. Analyze process conditions, instrumentation data, alarms, and system trends to ensure stable, safe, and efficient operation within defined operating limits, while taking timely control actions as required. Make Critical Operational Decisions in a Highly Automated Environment In coordination with the plant, exercise sound operational judgment and decision-making authority in response to process deviations, alarms, and abnormal conditions, executing corrective actions in line with established procedures, escalation protocols, and safety requirements. Operate within a highly automated, data-driven environment leveraging advanced process control, predictive analytics, and AI-enabled tools to drive performance outcomes while maintaining full accountability for actions taken. Troubleshoot and Resolve Process, Equipment, and Control System Issues Identify, diagnose, and resolve process inefficiencies, equipment malfunctions, and control system issues in real time. Collaborate closely with plant operations, process engineering, systems engineering, reliability teams, and other HROC resources to stabilize operations, minimize downtime, protect production, and sustain safe and reliable plant performance. Collaborate Across the HROC Network to Optimize System Performance Share best practices, transfer operational learnings, and optimize overall system performance. Work across HROC and plant teams to identify common challenges, replicate proven solutions, and support consistent performance improvement. Champion Standard Operating Procedures (SOPs) and Operational Consistency Champion SOPs to ensure consistency, reliability, safety, and efficiency in remote operations. Support the development, application, and continuous improvement of standardized procedures, escalation protocols, operating playbooks, and best-practice routines. Drive Continuous Optimization and Automation Strategies Support and actively contribute to the deployment and refinement of advanced automation strategies, improve process stability, throughput, energy efficiency, reliability, and cost performance. Identify and implement improvement opportunities through data analysis, operational insights, and cross-plant knowledge sharing. Leverage Data to Improve Performance and Standardization Use data to identify trends, inefficiencies, recurring issues, and improvement opportunities. Drive standardization and replication of best practices by sharing insights, learnings, and performance improvement actions across the HROC network. Ensure Safe, Stable, and Compliant Operations Ensure the safe, continuous, and compliant operation of plant processes, maintaining adherence to safety procedures, operating standards, environmental requirements, and quality targets. What Are We Looking For: Bachelor of Science/Engineering degree, preferably Chemical, Industrial or Manufacturing. Technical certifications or vocational training in process operations or a related field may substitute for a degree. Previous experience in a similar industrial environment is desirable, but not required due to the comprehensive training program. This position offers a unique opportunity for a 6-to-8-month training period that includes comprehensive training in the cement manufacturing process/equipment and key responsibilities. Strong analytical and problem-solving skills and attention to detail, with a high degree of accuracy and precision. Excellent communication and the ability to collaborate with maintenance, engineering, and production personnel. Ability to work rotating 12-hour day/night shifts, weekends, and holidays to sustain uninterrupted plant operations. Ability to travel in both the United States and Canada as required. What We Offer: Competitive base salary ranging from $75,410 to $100,550, and participation in our annual incentive plan. 401(k) retirement savings plan with an automatic company contribution as well as matching contributions. Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement - Account (HRA) and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Equal Opportunity Employer - Minority / Female / Veteran / Disabled As part of our hiring process, we may use AI-assisted tools to support the screening and evaluation of candidate applications and interviews. These tools help streamline the initial assessment, but all decisions about candidate advancement are made by human recruiters and hiring managers. While technology supports early steps, every interview will be handled by experienced recruiters and hiring managers to provide a personal touch.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Wiring Technician Lead to provide hands-on leadership and technical support within our wiring department. The Lead Wiring Technician will lead and support a team of Wiring Technicians in the assembly and wiring of custom electrical control panels while ensuring work is completed safely, accurately, and according to engineering drawings, project specifications, and Panelmatic standards. This role is responsible for helping coordinate daily work, providing technical guidance, inspecting completed work, troubleshooting wiring issues, and supporting the team in meeting project schedules and quality requirements. The Lead Wiring Technician will work closely with Production Supervisors, Engineering, and other team members to ensure projects are completed correctly and efficiently. Job Duties: • Lead and provide day-to-day direction and technical support to Wiring Technicians., • Review engineering drawings, wiring diagrams, schematics, and project specifications to determine assembly and wiring requirements., • Help assign and prioritize daily work based on project schedules and production needs., • Layout, measure, drill, and tap subpanels for initial assembly preparation., • Install DIN rail, equipment, SEL relays, lockout relays, test switches, terminal blocks, nameplates, wire duct, and other electrical components., • Cut, tag, route, and terminate wires according to project drawings and Panelmatic standards., • Inspect wiring and panel assemblies to ensure proper routing, labeling, termination, workmanship, and overall quality., • Troubleshoot wiring issues and assist technicians in resolving assembly and electrical discrepancies., • Identify drawing, material, or production issues and communicate them to the appropriate Supervisor or Engineering team., • Train and mentor Wiring Technicians on proper wiring techniques, tools, equipment, safety practices, and Panelmatic standards., • Provide hands-on assistance with complex or difficult wiring and panel assembly tasks., • Alter and cut steel, plastic, and other materials as required for panel fabrication and assembly., • Ensure work is completed in accordance with applicable safety requirements, quality standards, and project specifications., • Monitor progress and communicate project status, delays, material shortages, or other concerns to production leadership., • Help maintain an organized, clean, and safe work area., • Support testing, inspection, and final quality checks as needed., • Assist with onboarding and training new Wiring Technicians., • Promote teamwork, accountability, and a positive work environment., • Perform additional duties as needed to support project schedules, production goals, and overall department operations. Requirements • High school diploma or equivalent preferred., • 3+ years of experience in electrical panel wiring, electrical assembly, industrial wiring, or a related manufacturing environment., • Previous lead, senior technician, or informal leadership experience preferred., • Ability to read and interpret electrical schematics, wiring diagrams, engineering drawings, and assembly instructions., • Strong understanding of electrical panel assembly and wiring practices., • Experience using hand tools, power tools, wire strippers, crimpers, drills, and other electrical assembly equipment., • Ability to accurately measure, cut, route, label, and terminate electrical wiring., • Strong attention to detail and commitment to quality., • Ability to troubleshoot wiring and assembly issues., • Ability to communicate effectively with technicians, supervisors, engineering, and other departments., • Ability to provide direction, training, and support to less-experienced team members., • Ability to work independently while also functioning effectively as part of a team., • Ability to prioritize tasks and help keep projects on schedule. Benefits Benefits: • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K Retirement, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description We are seeking skilled and experienced Journeyman Electricians with expertise in commercial construction. The ideal candidates will be responsible for installing, maintaining, and repairing electrical systems, with a strong focus on working with conduit pipe and ensuring compliance with safety and building codes. Key Responsibilities: • Install, repair, and maintain electrical systems in commercial construction projects., • Work with various types of conduit pipe, including EMT, PVC, and rigid conduit., • Read and interpret blueprints, electrical schematics, and technical drawings., • Perform wiring, grounding, and panel installations according to code requirements., • Test electrical systems and components for safety, efficiency, and compliance., • Troubleshoot electrical issues and perform necessary repairs., • Ensure all work meets NEC (National Electrical Code) and local regulations., • Collaborate with other trades and contractors to complete projects on time., • Maintain a safe and organized work environment, adhering to OSHA guidelines. Qualifications:, • High school diploma or equivalent., • Valid Journeyman Electrician license. (Varies by State), • Minimum of 5 years of experience in commercial electrical work., • Extensive experience working with conduit pipe and electrical installations., • Strong knowledge of NEC and local electrical codes., • Ability to read and interpret blueprints and electrical diagrams., • Excellent problem-solving and troubleshooting skills., • Ability to lift and carry heavy equipment and work in various environmental conditions., • Valid driver’s license., • Ability to pass background check. Preferred Skills:, • Experience with fire alarm systems, lighting controls, and emergency power systems., • Ability to operate power tools and testing equipment., • Strong attention to detail and organizational skills., • Effective communication and teamwork abilities. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Job Description We are seeking Apprentice commercial electricians to join our team in Houston, TX (The TX Gulf Coast Region includes Houston and Greater Houston area.) As an apprentice commercial electrician, you will work under the guidance of experienced electricians to learn and develop the necessary skills to become a fully licensed electrician. This is a great opportunity for individuals who are passionate about the electrical trade and eager to gain hands-on experience in a variety of settings. Basic Qualifications: -Active TX ID or DL -Active Electrical License -Social Security Card -Tools -Reliable Transportation Duties/Skills/Physical Requirements: • Assist with the installation, maintenance, and repair of electrical systems commercial settings, • Learn to read and interpret blueprints, schematics, and technical drawings, • Assist in troubleshooting electrical issues and making necessary repairs, • Perform basic electrical tasks such as wiring, conduit bending, and circuit installation, • Learn to use hand tools and power tools safely and effectively, • Follow all safety protocols and regulations to ensure a safe working environment, • Collaborate with a team of electricians to complete projects efficiently and effectively -Clear communication skills are required for effective collaboration with team and other construction professionals • Knowledge of high voltage systems, • Experience working as a commercial electrician, • Knowledge of NEC (National Electrical Code) regulations- Strong understanding of electrical principles and concepts, • Basic knowledge of electrical principles and concepts, • Familiarity with hand tools and power tools used in the electrical trade, • Strong attention to detail and problem-solving skills -Commitment to safety protocols is essential, as the work involves handling potentially dangerous tools and equipment. -Must have the physical ability to perform tasks such as lifting, standing, and walking for extended periods. -The job may involve lifting heavy equipment -Must be able to safely work in various environmental conditions -The role can involve working at heights and in confined spaces. -A neat, clean, tidy, and professional appearance is always the EE standard -Expected work schedule hours: 40 per week • Documentation or letter verifying on the job training hours (OJT) can help determine starting salary* Benefits & Perks: • Competitive compensation, • Paid Vacation, • Paid Holidays (8.5 days), • Health Insurance, • Dental & Vision Insurance (covered by Enterprise.), • School Tuition Assistance, • Opportunities for career advancement, • Training and development programs, • 401K Retirement savings plan, • We offer competitive compensation and the opportunity for career growth within our organization., • Job Type: Full-time Enterprise Electrical Core Values: (Greatness) Committed to Excellence (Accountability) Plan it, Do it, Own it (Mentorship) Learn it, Know it, Teach it (Teamwork) One Team, One Goal (Positivity) Positive Attitude Required

Job Description Powell is an engineered to order manufacturer of switchgear and electrical equipment for the power generation industry. As a Wireperson you will perform various wiring tasks within the Electrical Assembly department. Four 10s Schedule: Monday-Thursday 2:30pm-1:00am. A Wireperson is responsible for assembling, installing, and maintaining electrical systems and components. They work with various types of wiring, cables, and connectors to ensure proper functioning of electrical equipment and systems. Wirepersons may read and interpret electrical schematics and blueprints, and they often work closely with electricians and other technicians to complete projects. They must adhere to safety regulations and follow industry standards to ensure the integrity and reliability of electrical systems. Essential Responsibilities Use hand tools (e.g. crimpers, strippers, torquing tools, calibrating tools, etc.) to perform tasks. Run and bundle wires according to Powell wiring standards. Layout, install, drill and tap devices onto doors and back pans. Install name plates and space heaters. Install and terminate CTs. Operate continuity buzzers. Terminate and run wire for MCC, SWGR, and harnesses according to wire diagram. Promote a safety culture as well as attend all safety meetings. Ensure that work areas remain clean and well organized. Perform in process inspections Minimum Qualifications Minimum education level of a High School Diploma or General Education Equivalent Diploma is preferred. Ability to read and understand point-to-point wiring diagrams Ability to read and use a tape measure Must have a basic command of the English language, both written and verbal. Safely use variety of hand/power tools. Lift up to 50lbs using proper lifting techniques. Preferred Qualifications Basic computer knowledge considered and asset. Knowledge of calibration Read and understand spec sheet and master copy drawing. Skills, Abilities & Other Requirements Positive attitude. Willingness to learn. Ability to follow direction from Senior Assemblers and Lead Assemblers. Effectively demonstrates on-time delivery and the ability to stay focused on goals and responsibilities. Self-starter with ability to take on multiple tasks with a drive to succeed. Challenges the status quo; looks for better or more efficient ways to get results. Ability to adapt to new ideas, technology, processes or product changes. Believes and displays through actions that our customers represent our current success and remain vital to our future growth. Demonstrates integrity and ethical decision making. Conscientious, thorough, accurate, and reliable when performing and completing job tasks. Able to work effectively within your team and around other departments and their activities. Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Working & Environmental Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. Required to wear personal protective equipment (PPE) at all times (i.e., hard hats, safety glasses, hearing protection, safety harnesses as required) and respirators when required. Must be able to work from all type of ladders (step ladders, "A" frame ladders and all size extension ladders) and scaffolding. Working at heights usually no higher than 30 feet in the air on or using proper lift equipment. Physical Requirements Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs. Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction in a repetitive manner continuously. Continuous standing, walking 50–300-foot distances for long periods of time with only occasional sitting. Must be able to climb stairs frequently throughout the shift. Able to frequently look over shoulders, work with both arms above shoulders and use both arms at full length frequently. Using upper extremities to apply or exert a force continuously up to 50lbs. Frequent use of hand tools such as tin snips, hammer, and power tools (some vibrating), for long periods of time.

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Lead Industrial Electrician to provide hands-on leadership and technical direction within our electrical integration team. The Lead Industrial Electrician will lead and support a team responsible for the electrical installation, wiring, and integration of equipment within custom metal buildings and enclosures. This position will ensure electrical installations are completed safely, accurately, and in accordance with engineering drawings, customer specifications, Panelmatic standards, and applicable NEC codes. The Lead Industrial Electrician will coordinate daily work activities, provide technical guidance to team members, inspect completed work, troubleshoot issues, and help ensure projects remain on schedule. The Lead Industrial Electrician will remain hands-on in the installation and integration process while serving as a technical resource and leader for the team. Job Duties: • Provide day-to-day direction, guidance, and technical support to Electrical Integration Technicians., • Help coordinate daily assignments and prioritize work based on project schedules and production requirements., • Lead by example and maintain high standards for safety, quality, productivity, and workmanship., • Train, coach, and mentor team members on electrical installation practices, tools, equipment, and Panelmatic standards., • Assist with onboarding and training new employees., • Monitor team progress and communicate project status, delays, material shortages, or technical concerns to the appropriate Supervisor or Production Manager., • Help identify and resolve production issues that could impact project schedules or quality., • Work closely with Engineering, Production, Quality, and other departments to resolve installation and technical issues., • Provide hands-on assistance with complex electrical installations and difficult integration tasks., • Consult blueprints, work orders, schematics, one-line diagrams, and engineering drawings to safely construct and integrate electrical systems., • Interpret customer specifications and engineering requirements to determine proper installation methods., • Perform and oversee conduit bending, threading, and installation, including EMT, RGS, and RAL., • Design and install conduit systems within space restrictions in accordance with one-line diagrams, NEC requirements, and customer specifications., • Install electrical panels, breakers, fuses, disconnects, and related electrical equipment., • Install and terminate electrical wiring, outlets, switches, junction boxes, terminal boards, and wall boxes., • Install electrical systems including security systems, fire detection systems, UPS systems, and other building or equipment systems., • Install fiber optic cable, communication lines, power systems, and other electrical infrastructure as required., • Install electrical components in buildings, machinery, computers, equipment, and custom enclosures., • Install heating and cooling electrical systems in industrial buildings and enclosures., • Install cable tray and open wiring systems., • Install utility fixtures, outlets, terminal boards, switches, and wall boxes using appropriate hand and power tools., • Cut openings and drill holes for fixtures, outlet boxes, fuse holders, panels, and other electrical components., • Measure, cut, and install frameworks and supports for conduit, control panels, junction boxes, and other electrical devices., • Connect electrical systems to power sources in accordance with applicable electrical requirements., • Use mechanical, electrical, and hydraulic conduit benders to complete installations., • Ensure electrical systems are properly grounded and installed according to applicable NEC requirements., • Use test meters, meggers, and other diagnostic equipment to test and troubleshoot electrical systems., • Consult with engineers, engineering technicians, line installers, industrial machinery mechanics, and other technical personnel when required., • Identify installation discrepancies and communicate required corrections to the appropriate personnel., • Inspect completed electrical work to ensure installations meet drawings, specifications, Panelmatic standards, and applicable codes., • Verify wiring, conduit, equipment, and components are installed correctly before requesting inspection., • Notify the appropriate Lead, Supervisor, or Inspector when work is ready for inspection, as applicable., • Assist with troubleshooting and correcting inspection findings., • Maintain a clean, organized, and safe work area throughout the workday., • Ensure tools, equipment, materials, and work areas are properly maintained and returned to their designated locations., • Follow all company safety policies, procedures, and required PPE requirements., • Promote a culture of safety and accountability among team members., • Assist leadership in monitoring project progress and identifying potential schedule concerns., • Help ensure materials and components are available when needed to maintain production flow., • Review work completed by team members and provide guidance when corrections are needed., • Assist with final electrical assembly, testing, and preparation for customer inspection or shipment., • Perform additional duties as assigned to support project completion and overall production goals. Requirements • Industrial Electrical Certification preferred, • 4+ years of experience in industrial electrical installation, electrical integration, industrial construction, or a related field., • Forklift certification preferred, • Experience in RIE and PEC Building preferred, • Experience in Electrical Racks preferred, • Extensive knowledge and comprehension of NEC and UL codes preferred, • Extensive knowledge of conduit bending preferred, • High school diploma or equivalent required, • Three plus years of experience in industrial electrical in a manufacturing environment required, • Three plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle grinder, conduit bender, etc.) required, • Knowledge of NEC codes and comprehension of general electrical standard required, • Three plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • Excellent communication skills both written and verbal required, • Ability to convert decimals to fractions and utilize conversion charts required, • Ability to read a tape measure and prints required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Excellent color vision and eyesight required, • Alignment with company core values required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid by Panelmatic for employee-only coverage, • 80% Panelmatic-paid / 20% employee-paid dependent coverage, • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and professional development, • PTO and paid holidays, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description Who We AreThermon is a diversified technology company and a global leader in industrial process heating, temperature maintenance, environmental monitoring and temporary power distribution solutions. We deliver engineered solutions that enhance operational awareness, safety, reliability and efficiency to deliver the lowest total cost of ownership.Thermon offers over 250 products, software and services across multiple brands, providing a range of offerings from boilers, transportation heaters, and liquid load banks to tubing bundles and heat trace. We are the silent guardians of critical infrastructure. From the relentless demands of chemical plants and the intricate networks of rail and transit to the vital pulse of power generation, we innovate solutions that ensure optimal operation, protect critical assets, and maximize efficiency.We care deeply about the success of our customers, the well-being of our people, and the reliability of every product we design. This drives our unwavering commitment to safety and integrity in everything we do. Through collaboration, we unite a rich legacy of expertise with a trusted global team, partnering side-by-side with our customers. We transfer the warmth needed to make life work. The RoleMust be able to maintain an orderly in-field stock of materials, deliver materials to work stations in a prompt and precise manner, and assist/make cable pulls, running conduit, and erecting cable tray. Rate will depend on experience and passing electrician test.What You Will DoTesting electrical and mechanical circuits for efficiency.Testing, Reading, Operating, Maintaining, Repairing Electrical and Heat Trace systems.Reading and comprehending electrical blue prints, schematics, one-line diagrams.Install, test, and commission Electric Heat Tracing.Following electrical codes and regulations set by the State of Texas and the US Gov. Proficient in reading and following directions, writing reports.Unload delivery trucks.Assembling, installing, maintaining, and repairing electrical and mechanical systems.Performing maintenance and repair of electrical, interior, and exterior electrical components.Available for Schooling and training.Have your own hand tools.To be successful in this role you will possessIndustrial Construction Experience in a fast-paced business environment is a plusHigh school and or trade school required.Must put safety above allElectrical LicenseNCCER certification/or equivalent work experience.TWIC card required (Transportation worker Identification card) Industrial experience. SCADA, PLC and Control Automation i.e. Energy Management Controls preferredProven history of leading, teaching, developing, and mentoring others successfully is a plus.Professional, Organized and dedicatedAbility to handle stressful situationsExcellent communication and personal skillsMust be able to understand and communicate in EnglishAbility to perform work in industrial facilities in extreme ambient conditions including climbing staircases, or laddersWe wish to thank all applicants for their interest, however, only those invited for an interview will be contacted.

Job Description We are seeking skilled and experienced Apprentice and Journeyman Electricians with expertise in commercial construction. The ideal candidates will be responsible for installing, maintaining, and repairing electrical systems, with a strong focus on working with conduit pipe and ensuring compliance with safety and building codes. Key Responsibilities: • Install, repair, and maintain electrical systems in commercial construction projects., • Work with various types of conduit pipe, including EMT, PVC, and rigid conduit., • Read and interpret blueprints, electrical schematics, and technical drawings., • Perform wiring, grounding, and panel installations according to code requirements., • Test electrical systems and components for safety, efficiency, and compliance., • Troubleshoot electrical issues and perform necessary repairs., • Ensure all work meets NEC (National Electrical Code) and local regulations., • Collaborate with other trades and contractors to complete projects on time., • Maintain a safe and organized work environment, adhering to OSHA guidelines. Qualifications:, • High school diploma or equivalent., • Valid Apprentice or Journeyman Electrician license. (Varies by State), • Minimum of 5 years of experience in commercial electrical work., • Extensive experience working with conduit pipe and electrical installations., • Strong knowledge of NEC and local electrical codes., • Ability to read and interpret blueprints and electrical diagrams., • Excellent problem-solving and troubleshooting skills., • Ability to lift and carry heavy equipment and work in various environmental conditions., • Valid driver’s license., • Ability to pass background check. Preferred Skills:, • Experience with fire alarm systems, lighting controls, and emergency power systems., • Ability to operate power tools and testing equipment., • Strong attention to detail and organizational skills., • Effective communication and teamwork abilities. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Lead Industrial Electrician to provide hands-on leadership and technical direction within our electrical integration team. The Lead Industrial Electrician will lead and support a team responsible for the electrical installation, wiring, and integration of equipment within custom metal buildings and enclosures. This position will ensure electrical installations are completed safely, accurately, and in accordance with engineering drawings, customer specifications, Panelmatic standards, and applicable NEC codes. The Lead Industrial Electrician will coordinate daily work activities, provide technical guidance to team members, inspect completed work, troubleshoot issues, and help ensure projects remain on schedule. The Lead Industrial Electrician will remain hands-on in the installation and integration process while serving as a technical resource and leader for the team. Job Duties: • Provide day-to-day direction, guidance, and technical support to Electrical Integration Technicians., • Help coordinate daily assignments and prioritize work based on project schedules and production requirements., • Lead by example and maintain high standards for safety, quality, productivity, and workmanship., • Train, coach, and mentor team members on electrical installation practices, tools, equipment, and Panelmatic standards., • Assist with onboarding and training new employees., • Monitor team progress and communicate project status, delays, material shortages, or technical concerns to the appropriate Supervisor or Production Manager., • Help identify and resolve production issues that could impact project schedules or quality., • Work closely with Engineering, Production, Quality, and other departments to resolve installation and technical issues., • Provide hands-on assistance with complex electrical installations and difficult integration tasks., • Consult blueprints, work orders, schematics, one-line diagrams, and engineering drawings to safely construct and integrate electrical systems., • Interpret customer specifications and engineering requirements to determine proper installation methods., • Perform and oversee conduit bending, threading, and installation, including EMT, RGS, and RAL., • Design and install conduit systems within space restrictions in accordance with one-line diagrams, NEC requirements, and customer specifications., • Install electrical panels, breakers, fuses, disconnects, and related electrical equipment., • Install and terminate electrical wiring, outlets, switches, junction boxes, terminal boards, and wall boxes., • Install electrical systems including security systems, fire detection systems, UPS systems, and other building or equipment systems., • Install fiber optic cable, communication lines, power systems, and other electrical infrastructure as required., • Install electrical components in buildings, machinery, computers, equipment, and custom enclosures., • Install heating and cooling electrical systems in industrial buildings and enclosures., • Install cable tray and open wiring systems., • Install utility fixtures, outlets, terminal boards, switches, and wall boxes using appropriate hand and power tools., • Cut openings and drill holes for fixtures, outlet boxes, fuse holders, panels, and other electrical components., • Measure, cut, and install frameworks and supports for conduit, control panels, junction boxes, and other electrical devices., • Connect electrical systems to power sources in accordance with applicable electrical requirements., • Use mechanical, electrical, and hydraulic conduit benders to complete installations., • Ensure electrical systems are properly grounded and installed according to applicable NEC requirements., • Use test meters, meggers, and other diagnostic equipment to test and troubleshoot electrical systems., • Consult with engineers, engineering technicians, line installers, industrial machinery mechanics, and other technical personnel when required., • Identify installation discrepancies and communicate required corrections to the appropriate personnel., • Inspect completed electrical work to ensure installations meet drawings, specifications, Panelmatic standards, and applicable codes., • Verify wiring, conduit, equipment, and components are installed correctly before requesting inspection., • Notify the appropriate Lead, Supervisor, or Inspector when work is ready for inspection, as applicable., • Assist with troubleshooting and correcting inspection findings., • Maintain a clean, organized, and safe work area throughout the workday., • Ensure tools, equipment, materials, and work areas are properly maintained and returned to their designated locations., • Follow all company safety policies, procedures, and required PPE requirements., • Promote a culture of safety and accountability among team members., • Assist leadership in monitoring project progress and identifying potential schedule concerns., • Help ensure materials and components are available when needed to maintain production flow., • Review work completed by team members and provide guidance when corrections are needed., • Assist with final electrical assembly, testing, and preparation for customer inspection or shipment., • Perform additional duties as assigned to support project completion and overall production goals. Requirements • Industrial Electrical Certification preferred, • 4+ years of experience in industrial electrical installation, electrical integration, industrial construction, or a related field., • Forklift certification preferred, • Experience in RIE and PEC Building preferred, • Experience in Electrical Racks preferred, • Extensive knowledge and comprehension of NEC and UL codes preferred, • Extensive knowledge of conduit bending preferred, • High school diploma or equivalent required, • Three plus years of experience in industrial electrical in a manufacturing environment required, • Three plus years of experience in the use basic tools (squares, clamps, fillet gauge, angle grinder, conduit bender, etc.) required, • Knowledge of NEC codes and comprehension of general electrical standard required, • Three plus years of experience in applicable QAPs (Quality Assurance Procedures) required, • Excellent communication skills both written and verbal required, • Ability to convert decimals to fractions and utilize conversion charts required, • Ability to read a tape measure and prints required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to stoop and bend required, • Ability to sit, stand, and walk for four plus hours at a time required, • Excellent color vision and eyesight required, • Alignment with company core values required Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid by Panelmatic for employee-only coverage, • 80% Panelmatic-paid / 20% employee-paid dependent coverage, • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and professional development, • PTO and paid holidays, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and experienced Wiring Technician Lead to provide hands-on leadership and technical support within our wiring department. The Lead Wiring Technician will lead and support a team of Wiring Technicians in the assembly and wiring of custom electrical control panels while ensuring work is completed safely, accurately, and according to engineering drawings, project specifications, and Panelmatic standards. This role is responsible for helping coordinate daily work, providing technical guidance, inspecting completed work, troubleshooting wiring issues, and supporting the team in meeting project schedules and quality requirements. The Lead Wiring Technician will work closely with Production Supervisors, Engineering, and other team members to ensure projects are completed correctly and efficiently. Job Duties: • Lead and provide day-to-day direction and technical support to Wiring Technicians., • Review engineering drawings, wiring diagrams, schematics, and project specifications to determine assembly and wiring requirements., • Help assign and prioritize daily work based on project schedules and production needs., • Layout, measure, drill, and tap subpanels for initial assembly preparation., • Install DIN rail, equipment, SEL relays, lockout relays, test switches, terminal blocks, nameplates, wire duct, and other electrical components., • Cut, tag, route, and terminate wires according to project drawings and Panelmatic standards., • Inspect wiring and panel assemblies to ensure proper routing, labeling, termination, workmanship, and overall quality., • Troubleshoot wiring issues and assist technicians in resolving assembly and electrical discrepancies., • Identify drawing, material, or production issues and communicate them to the appropriate Supervisor or Engineering team., • Train and mentor Wiring Technicians on proper wiring techniques, tools, equipment, safety practices, and Panelmatic standards., • Provide hands-on assistance with complex or difficult wiring and panel assembly tasks., • Alter and cut steel, plastic, and other materials as required for panel fabrication and assembly., • Ensure work is completed in accordance with applicable safety requirements, quality standards, and project specifications., • Monitor progress and communicate project status, delays, material shortages, or other concerns to production leadership., • Help maintain an organized, clean, and safe work area., • Support testing, inspection, and final quality checks as needed., • Assist with onboarding and training new Wiring Technicians., • Promote teamwork, accountability, and a positive work environment., • Perform additional duties as needed to support project schedules, production goals, and overall department operations. Requirements • High school diploma or equivalent preferred., • 3+ years of experience in electrical panel wiring, electrical assembly, industrial wiring, or a related manufacturing environment., • Previous lead, senior technician, or informal leadership experience preferred., • Ability to read and interpret electrical schematics, wiring diagrams, engineering drawings, and assembly instructions., • Strong understanding of electrical panel assembly and wiring practices., • Experience using hand tools, power tools, wire strippers, crimpers, drills, and other electrical assembly equipment., • Ability to accurately measure, cut, route, label, and terminate electrical wiring., • Strong attention to detail and commitment to quality., • Ability to troubleshoot wiring and assembly issues., • Ability to communicate effectively with technicians, supervisors, engineering, and other departments., • Ability to provide direction, training, and support to less-experienced team members., • Ability to work independently while also functioning effectively as part of a team., • Ability to prioritize tasks and help keep projects on schedule. Benefits Benefits: • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family), • 401K Retirement, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Position Description Ryder is hiring a Expereinced Level Diesel Technician in Houston, Texas— offering weekly pay, excellent benefits, and a Technician career you can feel good about. Hear it from a Ryder Technician Employee Here: https://RyderCareers.video/T4Bob • Hourly Pay: $34.00 Per Hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Monday through Friday, • Hours: First Shift 6:00 am – 2:30 pm, • Reefer Certification Required We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles Spots are filling fast — click apply now to secure your spot. Questions? Call Victor or text “Houston” to 904-659-3844 to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • 80 hours PTO your first year, starting Day 1, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Build your skills - paid training, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians At Ryder, you will be recognized and respected for your expertise and skill by joining a community of proud women and men in logistics, including many Military Reservists and Veterans. Ryder provides a clear path for career development and advancement. Share Ryder jobs with people you know-get paid for it. Ryder offers unlimited bonuses up to $1,500 for every hired Diesel Mechanic Technician and Fuel Service Employee. EEO/AA/Female/Minority/Disabled/Veteran Requirements • High School diploma or equivalent, • Vocational or Technical Certification in related field preferred, • Two (2) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment, • Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02, • Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years, • Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred, • Must be able to drive Ryder vehicles, • Ability to understand and adhere to Company policies in all areas, • Proven hands-on mechanic, customer service, and account management skills, • Ability to complete repair orders with the Company established systems, • Demonstrates customer service skills. Strong relationship management skills, • Strong verbal and written communication skills, • Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors), • Ability to work independently and as a member of a team, • Ability to prioritize workload, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Self-starter and self-sufficient approach, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detailed oriented with excellent follow-up practices, • Entrepreneurial spirit, • Other Service Island support - SBTIII trained - SBT220 within 180 Days, • Other Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mix (predominant OEM of fleet mix) within 1 year, • Other Tire & Wheel safety - TW220 within 90 Days, • Other Preventive Maintenance: qualified - (PM230&PM298) within 90 Days, • Other Brakes-Air qualified - (BA220&BA298) within 90 Days, • Other Must meet qualifications of brake mechanic and inspectors (FMCS 396.25), • Other Brake Hydraulic qualified - (BH220&BH298) where appropriate within 90 Days, • Other A/C recycling/recovery certified - CF609 within 90 Days, • Other A/C qualified - (AC220&AC298) within 180 Days, • Other HD electrical trained - DR208 within 90 Days, • Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required, • DOT Safety Regulated Position, • Safety Sensitive Position Regulated Tech: • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:, • A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks, • Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified, • Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes, • Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions, • Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check, • Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation, • Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems, • Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables, • Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights, • Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers, • Driveline: Lubricate drive line; Inspect components for wear or damage, • Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks, • Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition, • Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors, • Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal, • Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc., • Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298), • Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism, • Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents, • Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements, • Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer, • Act as a mentor for the Mobile Technician II level, • Performs other duties as assigned Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 3 hours ago (10/13/2026 5:11 PM) Requisition ID 2026-213051 Location (Posting Location) : State/Province TX Location (Posting Location) : City HOUSTON Location (Posting Location) : Postal Code 77061 Category Technicians/Service Employees8 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000127 Min Pay USD $34.00/Hr. Max Pay USD $34.00/Hr.

Job Description Advanced Containment Systems, Inc. believes in providing an atmosphere that provides an individual the ability to exercise their talents and abilities in a fair and respectful workplace. As a manufacturer of custom transportable products to address the restroom/shower trailer, homeland security, abatement, first responder and military industries, we offer a stable work environment that is not impacted by the oil and gas sector and as an EEO/AA employer we welcome all individuals an opportunity to come and join our growing team in South Houston! Multiple Openings Available! Purpose for the position: Perform skilled work involving plumbing under the direction of area supervisor and/or lead man in assigned department, including but not limited to Water supply lines assemblies, DWV line assemblies and common plumbing connection (connection sinks, toilets exc.). Essential job functions: • Verifies conformance of finished goods., • Ensures quality in every task performed., • Builds product to design specification utilizing drawings., • Maintains a clean and safe work environment., • Adheres to all company general and safety policies Knowledge, skills and abilities: • Ability to carry out not only simple but complex oral and written instructions., • basic math skills, • Ability to read and understand English., • Ability to operate hand tools including but not limited to drills; grinders; heat guns; rivet guns., • Ability to comprehend additional training in relation to the performing of the work duties., • Ability to cross train and perform many different tasks across multiple departments., • High level of attentiveness and physical coordination to perform the work activities safely and productively. Schedule & Physical demands: Most of the work tasks are performed in-door and subjected to environmental and weather condition changes. Hours: 8 or more hours per day Week: 40 or more Lunch: Half hour Sitting/standing: Stands 100 % of the time Environment: Shop is not air-conditioned Stress: Medium Physical task: Must bend, squat, lift, push or pull material up to 50 lbs frequently. Job Posted by ApplicantPro

Job Description We are seeking highly skilled and experienced Apprentice and Journeyman Plumbers with a minimum of 5 years of experience in commercial construction plumbing. The ideal candidates will be responsible for installing, maintaining, and repairing plumbing systems in commercial buildings, ensuring high-quality craftsmanship and compliance with industry standards. Key Responsibilities: • Install, repair, and maintain plumbing systems in commercial construction projects., • Measure, cut, and assemble pipes and fittings according to specifications., • Work with various plumbing materials, including PVC, copper, and cast iron., • Interpret blueprints, schematics, and technical drawings to determine project requirements., • Test plumbing systems for leaks and ensure compliance with local building codes., • Operate hand and power tools used in plumbing installation and repair., • Lead and supervise a small crew of apprentices and helpers, ensuring work is completed efficiently and to quality standards., • Collaborate with other trades to ensure seamless project completion., • Perform quality control checks and ensure compliance with all plumbing regulations and safety standards., • Maintain a safe and organized work environment, adhering to OSHA guidelines.Qualifications:, • Valid Apprentice or Journeyman Plumbers License. (Varies by State), • Minimum of 5 years of experience in commercial plumbing installation., • Strong knowledge of plumbing systems, installation techniques, and local plumbing codes., • Ability to read and interpret blueprints and technical specifications., • Experience working with various hand and power tools used in plumbing., • Ability to lift and carry heavy materials and work in various environmental conditions., • Valid driver’s license., • Ability to pass background check.Preferred Skills:, • Familiarity with local plumbing codes and regulations., • Experience with soldering, brazing, and welding plumbing components., • Strong problem-solving and organizational skills., • Effective communication and leadership abilities. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Job Description Key Tasks and Responsibilities: • Safely operate truck to destination arriving on schedule, • Inspect truck for defects before and after trips and submit reports indicating truck conditions., • Maintains driver log according to D.O.T. regulations, • Assists in loading and unloading truck. Always secures loads to trailers, • Verifies contents of load with manifest before leaving, • Inspects truck equipment and supplies such as tires, lights, brakes, fuel, oil and water and reports daily with inspection logs, • Maintain regular and predictable attendance, • Performs all assignments as directed, • To safely maneuver vehicle on jobsite, • To conduct all operation of vehicle in a professional manner, • To operate vehicle in a courteous, efficient manner at all times, • To keep accurate and dependable vehicle documents (i.e. Insurance cards, cab cards, permits, registrations for trailers, etc.), • Ability to identify minor maintenance issues that may occur on the road and manage repairs utilizing company resources within company policy for the same, • To adhere to appropriate safety procedures for securing of panels while unloading (i.e. safety chains, straps, etc.), • Relevant documents or administrative work for assigned routes, • Other duties as assigned Skills and Attributes: • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals, • Ability to write routine reports and correspondence, • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals, • Ability to apply common sense understanding to carry out instruction furnished in written, oral or diagram form, • Ability to deal with problems in a calm and rational manner, • Valid Commercial Driver’s License (CDL) Class A or B with HAZMAT endorsement, • Ability to back into tight areas where pavement may not exist, • Ability to qualify for a D.O.T. Medical Card, • Ability to pass drug screening Experience Requirement: Two to five years with driving CDL Education Requirement: High School education Pay: $25.00 to $32 + per hour \nCompany Description Earth Smart Environmental Solutions (ES2) is a Service-Disabled Veteran Owned Small Business that provides recycling, reuse and/or disposal of hazardous, universal, medical, pharmaceutical, non-hazardous, and solid waste while meeting or exceeding customer expectations for all of the United States. ES2 follows all local, state, and federal requirements and has maintained zero safety finding or notice of violations. ES2 is an equal opportunity employer. We do not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity, or any other characteristic protected by law. Service members and veterans, and the spouses and family members of the service members and veterans are encouraged to apply. Earth Smart Environmental Solutions (ES2) is a Service-Disabled Veteran Owned Small Business that provides recycling, reuse and/or disposal of hazardous, universal, medical, pharmaceutical, non-hazardous, and solid waste while meeting or exceeding customer expectations for all of the United States. ES2 follows all local, state, and federal requirements and has maintained zero safety finding or notice of violations. ES2 is an equal opportunity employer. We do not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity, or any other characteristic protected by law. Service members and veterans, and the spouses and family members of the service members and veterans are encouraged to apply.

Job Description MUST HAVE AT LEAST 2 YEARS OF EXPERIENCE. MUST HAVE A CLASS A CDL. MUST BE ABLE TO PASS A DRUG SCREEN. MUST BE WILLING TO WORK HARD AND BE RESPECTFUL. 30% PER LOAD PAY Job Type: Full-time HIRING ASAP!! Pay: 55cents a mile • Perform job duties in a safe manner compliant with policies, procedures and practices., • MUST be able to operate a manual and automatic transmission, • Comply with DOT (Department of Transportation), EPA (Environmental Protection Agency), industry, state and local government regulations., • Safely drive, maneuver and operate commercial vehicles and equipment., • Inspect work order and shipping paperwork, verify for accuracy., • Load plastic/resin onto truck; ensure correct equipment is present to safely perform job., • Perform jobs tasks which may include: Safely use manual tools (rack, water hoses) to remove materials; prepare, properly attached and operate hoses on vacuum trucks; safely operate., • Inspect equipment (including pre-check and post-check equipment protocols) including lights, hoses, equipment connections, and pumps; ensure deficiencies are correct equipment or replaced to ensure safety and compliance., • Maintain, complete and submit appropriate paper work and reports timely as required including: travel logs, time sheets and, maintenance documents., • Maintain a safe, neat and clean work environment, this includes: work area and equipment., • Model professional behavior at all times; report to work as scheduled, on time and prepared to work., • Comply with appearance and dress policies to ensure a safe and professional work environment., • Wear personnel protective equipment (PPE) as defined by policy, regulations, practice, and customer, • Work flexible schedule that may include nights, weekends and holidays., • Work effectively in team environment and provide support and assistance., • Commitment to promoting and creating a safety culture and positive work environment Qualifications Requirements: • Valid Driver’s License., • CDL Class A, • Effective communication skills, both written and verbal., • Read and understand instructions/signs/directions ., • Pass drug screen, physical and safety sensitive background check., • Refer a new driver and earn up to a $1000 bonus after completing 90days. Physical Requirements - Able to: • Wear required personnel protective equipment including; gloves, respirators, safety glasses, foot protection and hard hat, • Sit periodically and for extended periods of time; climb ladders and stairs, reach below knees and above shoulders; kneel and crawl to access work areas., • Stand, walk, bend, stoop; reach forward and grasp for periods of time., • Balance while walking on wet and slick surfaces, metal grates, narrow platforms, and uneven surfaces., • Work in loud, cold, hot, wet and dry environments; both indoors and outdoors in inclement weather., • Enter and exit industrial vehicles and equipment without assistance.

We are searching for Staff Nurses for our NICU 2 Team! We are looking for someone who works well in a fast-paced setting. In this position you'll provide quality nursing care to patients by assessing, planning, educating, implementing, and evaluating age appropriate care in a manner that incorporates family-centered principles and cost-effective care. We need someone who can collect and analyze data from the medical record in order to coordinate patient care. Think you've got what it takes? QUALIFICATIONS • Bachelor's degree in nursing or other degree in nursing with acceptance or current enrollment in a BSN program and signed agreement, • Current licensure with the Board of Nursing for the State of Texas or Nurse Licensure Compact and BLS certification are required, • 9 months of professional nursing experience, • The ability to demonstrate positive and appropriate interpersonal skills, good time and resource management skills, flexibility, strong oral and written communication skills, knowledge of unit-specific equipment, and knowledge of the nursing process, critical thinking skills, PALS, and interdisciplinary collaboration, • Previous NICU or ICU experience highly preferred! As part of our commitment to maintaining a safe and healthy workplace, all successful candidates will be required to undergo respiratory fit testing in compliance with occupational health and safety standards. RESPONSIBILITIES • Perform and document assessments of the patient/family including biophysical, psychosocial, developmental, cultural, spiritual, and environmental needs, • Collect and analyze data from the medical record in order to coordinate patient care, • Analyze situations, anticipate potential problems, and detect changes in patient status, • Identify each patient's needs pertaining to patient teaching, discharge planning, growth and development, nutritional screening, functional status, and pain management, • Develop an individualized plan of care based upon the nursing assessment and re-prioritize and change as necessary, • Determine which standards of care and practice apply to the patient and coordinate among other health team members as appropriate, • Participate in interdisciplinary rounds and/or patient care conferences, • Execute therapeutic physician or nurse interventions according to established standards, • Evaluate and document the patient's response to the care provided and recognize their progress towards the desired outcome, • Identify actual/potential barriers to learning and utilize various teaching strategies to overcome them as appropriate, • Maintain confidentiality concerning patient/family issues, • Act as a resource in educating new employees/team members, • Participate in achieving hospital/unit goals, structures, and priorities ABOUT US Since 1954, Texas Children's has been leading the charge in patient care, education and research to accelerate health care for children and women around the world. When you love what you do, it truly shows in the smiles of our patient families, employees and our numerous accolades such as being consistently ranked as the best children's hospital in Texas, and among the top in the nation by U.S. News & World Report as well as recognition from Houston Business Journal as one of this city's Best Places to Work for ten consecutive years. Texas Children's comprehensive health care network includes our primary hospital in the Texas Medical Center with expertise in over 40 pediatric subspecialties; the Jan and Dan Duncan Neurological Research Institute (NRI); the Feigin Tower for pediatric research; Texas Children's Pavilion for Women, a comprehensive obstetrics/gynecology facility focusing on high-risk births; Texas Children's Hospital West Campus, a community hospital in suburban West Houston; Texas Children's Hospital The Woodlands, the first hospital devoted to children's care for communities north of Houston; and Texas Children's Hospital North Austin, the new state-of-the-art facility providing world-class pediatric and maternal care to Austin and Central Texas families. We have also created Texas Children's Health Plan, the nation's first HMO focused on children; Texas Children's Pediatrics, the largest pediatric primary care network in the country; Texas Children's Urgent Care clinics that specialize in after-hours care tailored specifically for children; and a global health program that is channeling care to children and women all over the world. Texas Children's Hospital is affiliated with Baylor College of Medicine, one of the largest, most diverse and successful pediatric programs in the nation. To join our community of 15,000+ dedicated team members, visit texaschildrenspeople.org for career opportunities. Texas Children's is proud to be an equal opportunity employer. All applicants and employees are considered and evaluated for positions at Texas Children's without regard to mental or physical disability, race, color, religion, gender, national origin, age, genetic information, military or veteran status, sexual orientation, gender identity, marital status or any other protected Federal, State/Province or Local status unrelated to the performance of the work involved.

Aramark Sports & Entertainment is hiring for an Executive Chef for Reliant Park in Houston, Texas. Reliant Stadium is home of the Houston Texans and the Houston Livestock Show and Rodeo. The Executive Chef is a management position overseeing chef managers as well as hourly culinary staff, responsible for developing and executing culinary solutions to meet customer needs and tastes. Offers a wide variety of culinary solutions to meet customer and client needs and tastes. Oversees and manages culinary operations to meet production, presentation, and service standards. Applies culinary techniques to food preparation and manages the final presentation and service of food. • Ensures culinary production appropriately connects to the Executional Framework, • Ensures proper culinary standards and techniques are in place for preparation of food items, including production, presentation, and service standards, • Manages a culinary team, including chef managers and hourly staff, to ensure quality in final presentation of food, • Train and manage culinary and kitchen employees to use best practice food production techniques, • Coach employees by creating a shared understanding about what needs to be achieved and how it is to be achieved, • Reward and recognize employees, • Plan and execute team meetings and daily huddles, • Complete and maintain all staff records including training records, shift opening/closing checklists and performance data, • Develop and maintain effective client and guest rapport for mutually beneficial business relationships, • Interact directly with guests daily, • Aggregate and communicate regional culinary and ingredient trends, • Responsible for delivering food and labor targets, • Consistent focus on margin improvement; understanding performance metrics, data, order, and inventory trends, • Ensure efficient execution and delivery of all culinary products in line with the daily menu, • Maintain integrity of the standard Aramark food offer; responsible for always maintaining food quality and safety of items, • Full compliance with Operational Excellence fundamentals: managing waste, standard menus, recipes and ingredients through managing customer driven menus and labor standards, • Understand end to end supply chain and procurement process and systems, ensuring only authorized suppliers are used, • Full knowledge and implementation of the Food Framework, • Ensure accuracy of estimated food consumption for appropriate requisitions and/or food purchase, • Ensure proper equipment operation and maintenance, • Ensure compliance with Aramark SAFE food and Quality Assurance standards, occupational and environmental safety policies in all culinary and kitchen operations, • Comply with all applicable policies, rules and regulations, including but not limited to those relating to safety, health, wage and hour At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice.- Requires at least 4 years of culinary experience At least 2 years in a management role preferred Requires a culinary degree or equivalent experience Ability to multi-task Ability to simplify the agenda for the team Requires advanced knowledge of the principles and practices within the food profession. This includes experiential knowledge required for management of people and/or problems. Requires oral, reading, and written communication skills Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on , and .

ResCare Community Living, a part of the Sevita family, provides quality services that empower individuals, enhance independence, and help people live well. Since 1974, we’ve supported individuals with intellectual and developmental disabilities to live more independently at home and in their community. With our dedicated team and experienced staff, we provide person-centered services that help people build skills, overcome challenges, and reach their full potential. Salary: $35,568/yr. SUMMARY The Day Program Manager is responsible to manage the services delivered to a designated program or set of programs, and the operation of programs including organization and implementation of direct supports, person-centered planning and implementation, health care, advocacy, stakeholder relations, regulatory compliance, staffing, training, financial management and maintenance of the physical environment. ESSENTIAL JOB FUNCTIONS To perform this job successfully, an individual must be able to satisfactorily perform each essential function listed below. Staff Management: Oversees implementation of human resource practices including recruitment, retention, training, scheduling, processing, record keeping, and management of program employees; 1. Recruitment & Hiring: • Participates in the recruitment and interviewing of all staff; • Hires direct staff members in consultation with the PM’s manager; and approves the hiring of direct support professionals and other indirect staff members. 2. Meetings & Training: • Organizes and implements on-site orientation and training for assigned programs; and monitors training compliance and documentation. • Conducts monthly staff meetings; attends monthly regional meetings. 3. Employee Scheduling: • Designs and monitors schedules to assure that all shifts are covered; • Monitors and minimizes overtime. 4. Performance Evaluation: • Conducts annual performance evaluations for direct reports in consultation with the PM’s manager; • Reviews and approves annual Direct Support Professional and other staff member’s performance evaluations. 5. Coaching, Discipline and Termination: • Coaches employees, correcting or directing employee behavior where required; • May remove employees in the event of emergency; • May recommend and participate in decisions regarding discipline and termination in consultation with the PM’s manager and Human Resources; • Manages the termination of Direct Support Professionals or other staff members as necessary; 6. Employee Safety: • Responsible for employee safety and workers’ compensation programs; • Monitors compliance; and assists in returning employees to work; • Implements, oversees, and trains employees about safety. Program Management: Manages the implementation of program planning; monitors delivery of services and supports; ensures services are consistent, engaging and relevant to the individuals served. 1. Program Planning: • Writes and approves individual program plans (as appropriate); • Trains and assists appropriate staff members with implementation of plans across all shifts. 2. Records: • Periodically audits individual records and other program documentation for accuracy and completion. 3. Program Team Meetings: • Conducts progress meetings and (quarterly, annual and/or other) reviews as appropriate or determined by the interdisciplinary team; • Provides and approves written and progress reviews. 4. Compliance: • Oversees licensing compliance for program services and supports; • Ensures timely and accurate program documentation; • Implements the Network compliance plan; and manages individual rights implementation. 5. Management of Individuals’ Assets: • Implements system and oversees management of individual’s funds and property, assuring safety and accuracy; audits, monitors and reviews individual’s financial accounts (as applicable) 6. Stakeholder Relations: • Maintains productive and professional relations with individuals, families, case managers and other stakeholders; • Provides regular communication to stakeholders; and acts as point of contact for all stakeholders; • Implements satisfaction improvement plans. 7. Incidents: • Implements proactive strategies to reduce or eliminate serious incidents; • Takes immediate steps to correct potential safety concerns and limit the potential for continued concern or incident; • Reviews all incidents and directs appropriate response; ensures timely incident reporting; and signs and submits all incident reports as required. Health Care: Oversees implementation of individual health care while in Day Program’s care; implements strategies to limit illness or serious incident; oversees and reviews health care documentation. 1. Medications: • Oversees system for medication administration, documentation and security; • Reviews documentation for accuracy and completeness; • Assures all applicable employees are certified or trained in medication administration. 2. Medical Supplies and Equipment: • Approves purchases of medical supplies and equipment; and ensures training on proper use to all employees. 3. Dietary planning: • Monitors food service in accordance with dietary plans and to meet regulatory compliance; • Ensures consideration for special needs, occasions and individual choice. Finance: Responsible for the financial performance of the program, from billing to staff budgets, as well as reviewing and approving purchases 1. Purchasing: • Approves purchase of food, supplies and equipment; and reviews and monitors monthly invoices for accuracy and budgetary compliance. • Attests to company credit card statements and monthly invoices in accordance with company policy. 2. Billing and utilization: • Oversees census, attendance information or other required documentation to assure accurate billing; • Monitors utilization between authorization and provision of services and supports. 3. Staffing: • Monitors staffing hours for budgetary compliance. 4. Growth: • Maximizes census, average daily attendance and utilization. Maintenance: Oversees the maintenance and cleanliness of the program’s facilities and vehicles. 1. Vehicles: • Ensures vehicles are properly maintained, clean, and safe by consulting with maintenance personnel; • Implements training procedures for maintenance and safe operation of company-owned vehicles; • Addresses known safety concerns with employee vehicles or other means of transportation, for the safe transport of individuals. 2. Housekeeping: • Monitors and implements strategies to assure neat, clean, and safe program environments (internal and external); • Ensures age appropriate and esthetic decoration. 3. Maintenance and Repair: • Oversees environmental safety program; establishes preventive maintenance schedule; maintains furnishings, equipment and facilities in good repair and compliant with regulatory standards. Other: • Attends monthly regional meetings and additional meetings as needed • Performs other related duties and activities as required. SUPERVISORY RESPONSIBILITIES • Manages the direct or indirect staff members of the program including performance evaluations, scheduling, orientation, and training. Makes recommendations and/or decisions on employee hires, transfers, promotions, salary changes, discipline, terminations, and similar actions. Resolves employee problems within position responsibilities. Minimum Knowledge and Skills required by the Job The requirements listed below are representative of the knowledge, skill, and/or abilities required to perform the job. Education and Experience: • Bachelor's degree and two to three years of related experience in the Human Services Industry preferred. • An equivalent combination of education and experience which provides proficiency in the areas of responsibility listed above may be substituted for the above education and experience requirements. • Other education and experience as required by applicable regulations. Certificates, Licenses, and Registrations: • Current driver's license, car registration and auto insurance if driving on the behalf of the Company or providing transportation to individuals receiving services. • Licensure as required by state. • Medication Management Certificate issued with the completion of Company provided training. • Mandatory Reporter Certificate issued with the completion of Company provided training • Other training and/or certification per state requirements and/or service line. Other Skills and Abilities: Other Requirements: • Travel as needed Physical Requirements: • Medium Work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. AMERICANS WITH DISABILITIES STATEMENT External and internal applicants, as well as position incumbents who become disabled, must be able to perform the essential job functions either unaided or with assistance of a reasonable accommodations to be determined on a case by case basis via the interactive process. Sevita is a leading provider of home and community-based specialized health care. We believe that everyone deserves to live a full, more independent life. We provide people with quality services and individualized supports that lead to growth and independence, regardless of the physical, intellectual, or behavioral challenges they face. We’ve made this our mission for more than 50 years. And today, our 40,000 team members continue to innovate and enhance care for the 50,000 individuals we serve all over the U.S. As an equal opportunity employer, we do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, citizenship, or any other characteristic protected by law.

Calpine, a business unit of Constellation Energy Corporation (Nasdaq: CEG), is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. With 79 energy facilities in operation, Calpine’s fleet has the capacity to generate approximately 27,000 MW of electricity – enough to power approximately 27 million homes. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (including but not limited to the following; other duties may be assigned) Directs overall management of the Battery Energy Storage Systems (BESS) project and is fully responsible for BESS engineering and technology. Lead BESS team efforts to support the construction, operation and maintenance planning, and supporting project development. This position will be involved in day-to-day operations; such as budgets, schedules, and making sure performance standards are set, maintained and achieved. This includes project conceptualization, management of design engineering, development fatal flaw analysis, equipment and vendor selection analysis, vendor and EPC negotiation and management, support construction management, and operations and maintenance planning and analysis. In this role, it is imperative to collaborate with an interdisciplinary team involved in all stages of project development and commercialization. Maintains the efficiency of important aspects of the Battery Energy Storage Systems project management process such as planning, scheduling, and budget and risk assessment. Defines and develops the BESS project management best practices, processes, and policy to ensure alignment with corporate strategy and goals. Partners with multi-departmental leadership and other stakeholders to locate opportunities and develop and prioritize projects according to relevant measurement criteria. Responsible for the supervision of others to ensure that all projects are delivered within the defined scope, quality, time and cost requirements. Job Responsibilities • Development Engineering: o Responsible for leading conceptual designs and layouts for development projects currently in the pipeline as well as new green field developments. o Responsible for leading technical analysis, internal and external, for different feasibility studies and project assessment during the development phase. o Collaborate and give technical support in matters related to the connection to the grid and regulation capabilities of the storage. o Manage the engineering team to ensure compliance with local regulations while optimizing the project design in efficiency and performance. o Responsible for lead the technical and techno-commercial development activities to support Development to assure timely and cost-effective resolution to regulatory, permitting and technical issues associated with the execution and delivery of BESS projects. o Collaborates with the Development team in the preparation and coordination of proposals, proposal materials, and other marketing efforts in support of the market segment. This may include gathering, verifying, and formatting proposal information. • Technology: o Establish and lead the relationships with BESS vendors and coordinate with their technical personnel to stay up to date with technology trends and products specifications o Actively engage in industry standards committees such as NFPA, IEEE, etc. to be on the forefront of industry standards and specifications o Understand the various battery technologies and industry practices to provide guidance to the organization on the application of technology. Educate the procurement, engineering, and operations teams on latest industry technology. o Evaluate available and emerging storage technologies and communicate new technology development and risks associated with the new technology. • Project Tenders: o Lead the development of technical specifications for the procurement, RFI/RFP/RFQ process, of ES systems, subcontractors, and support services. o Responsible for leading the development of key contracting strategies, terms, and implementation of energy storage systems o Responsible for overseeing the team to review technical aspects of OEMs and EPCs proposals pertaining to energy storage during the selection with a tabulation of the received bids in order to ensure the selection of the best offer from the engineering point of view. • Engineering and Standards: o Lead the team to establish and maintain the engineering, design criteria and applicable standards and specifications for BESS projects. o Responsible for the development, review and technical oversight of engineering requirements and design of energy storage projects. o Review/approve the work of consultants used on BESS projects to ensure consistent and cost-effective designs and timely delivery. o Responsible for ensuring the highest level of environmental health and safety in all engineering and design aspects of energy storage projects. o Lead the value-engineering approach when designing energy storage systems in multiple project-specific use cases. • Others: o Provide technical support in evaluating potential M&A efforts for additional ES projects. o Provide support to construction team in relation to ES technology implementation. o Support construction team in developing and enhancing installation and commissioning procedures. o Support the O&M team in developing work procedures and best practices to optimize the operation of the ES systems. o Provide cross-organization training on ES technologies. Job Requirements o 10+ years of experience in the renewable industry o Bachelors Degree Required; Preferred Engineering, Masters or PhD. o Grid connected BESS or any inverter-based generation experience o Working experience in AutoCad and other CAD software to produce conceptual layouts o Knowledge of the National Electric Code, NFPA and UL standards o Proven experience in design and delivery of grid scale bulk energy storage technology solutions. o Proficient knowledge of the full Microsoft Office suite high proficiency in Word, Excel, PowerPoint required o Strong technical, analytical, quantitative, strategic, and management skills o Strong organizational skills and high attention to detail o Strong written and verbal communication, interpersonal, and teamwork skills o Ability to work productively with limited supervision o Strong time-management skills and ability to multi-task o Strong interest in renewable energy and utility business o Business acumen and demonstrated strong project management skills o Ability and willingness to travel Preferred Skills: o Strong understanding of control systems, SCADA, HMI, EMS, and networking protocols o Strong understanding of mechanical systems including HVAC and fire protection systems needed in the ES systems. o Experience performing power systems analysis in software packages such as PSS/E, ETAP or PSCAD is a plus o Knowledge of engineering and market economics and design optimization o Wind and/or Solar system installation or design experience is a plus o Professional Engineer (PE) registration Salary Information o Range - $172,739 to $220,243 / yearly Additional Calpine Information: Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to hrrecruitment@calpine.com. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP _ Education Preferred • Bachelor of Science or better in Engineering - Electrical Licenses & Certifications Preferred • Engineer - Mechanical Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description ESSENTIAL DUTIES and RESPONSIBILITIES Greet and assist passengers in navigating through, and around the airport. Direct taxicabs to any and all persons requesting one. Dispatch a sufficient number of taxicabs to the terminal or to other loading points and the terminal. Assist passengers in acquiring their luxury limousines. Provide information to passengers who need assistance in getting to other forms of ground transportation. · Greet passengers at taxi curbside in Ground Transportation area of airport and offer them assistance or directions. Information provided to passengers must be accurate. • Direct passengers to the appropriate taxi/limo service., • Ensure that a sufficient number of taxicabs are available for the traveling passengers, and dispatch taxicabs to various loading points at terminal., • Communicate with drivers, co-workers, and supervisors and address any concerns., • Write factual reports regarding items that deviate from normal operation. · Direct Rideshare Drivers to appropriate area while waiting on passenger(s). · Identify and report Rideshare operators not in compliance (i.e.) failing to display Trade Addresses, visible issues/damage to Rideshare vehicles. · Report Rideshare violations. • Identify and report any safety issues immediately to supervisor. EDUCATION / QUALIFICATIONS • Must be 18 years of age or older at time of hire., • Minimum of high school education or GED and related factory experience, • Knowledge of metro area is desirable., • Customer service experience preferred., • Prior airport experience is preferred., • Must have an excellent attendance and arrive to work on time when scheduled and have access to reliable transportation., • Must have a good English language, written and verbal AVAILABILTY TO WORK Special shift requirements, if any, will vary depending on a location's hiring needs. If applicable, availability to work 2nd shift, 3rd shift and/or week-ends may be required. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; talk and listen. Employees are regularly exposed to outside weather conditions including snow storms, and extreme heat. This position is 100% outside work. WORK ENVIRONMENT Employees work in and around traffic situations, and employees are to be safety conscious at all times. Employees are frequently required to reach and or sign (communicate) with hands and arms. Employees on occasion must lift/move up to 50 lbs. Employees are regularly exposed to high levels of noise and/or fumes from either vehicles or airplanes. WILL BE REQUIRED TO PERFORM OTHER DUTIES AS REQUESTED, DIRECTED OR ASSIGNED \nCompany Description Engineering and Logistics Firm that provides service sectors include planning, civil, environmental, transportation, structural, water resources and water and wastewater engineering, program and construction management, the development of plans, specifications and estimates along with a cadre of other design engineering and construction phase services. Engineering and Logistics Firm that provides service sectors include planning, civil, environmental, transportation, structural, water resources and water and wastewater engineering, program and construction management, the development of plans, specifications and estimates along with a cadre of other design engineering and construction phase services.

CDL‑A Driver – Local Routes Steady Work | 29.00/hour | Home After Every Shift - Monday-Friday – 5am start time (Some Saturdays) Liquid Environmental Solutions (LES) is hiring experienced CDL‑A drivers who want reliable, year‑round work and don’t mind getting their hands dirty. If you’re looking for a stable early morning role with solid pay, overtime, and full benefits, this could be a great fit. This is local overnight field service work operating tanker and vacuum trucks at commercial and industrial sites. It’s hands‑on, physical work — but it’s honest, essential, and recession‑resistant. And yes… it pays well. What You’ll Do • Operate CDL‑A tanker/vacuum trucks safely and efficiently, • Perform overnight service work at customer facilities, • Use industrial equipment such as hoses, pumps, and tanks, • Complete DVIRs, safety checks, and service documentation, • Work outdoors or industrial environments, • Represent LES professionally with customers and teammates Schedule & Work Environment • 5am daily start required, • Overnight / night shift availability preferred, • Local routes — no long-haul, no hotels, • Overtime, weekends, and longer shifts available, • Year‑round work — no seasonal layoffs What We’re Looking For • Valid CDL‑A license (Tanker endorsement required), • 1 year of verifiable CDL driving experience, • Manual transmission driving (unrestricted license), • Ability to perform physical work: lifting, pulling, climbing, bending, • Comfort working in dirty, greasy, industrial settings, • Strong safety mindset and acceptable driving record, • Dependable, self‑directed, and accountable What You Get · Competitive hourly pay + overtime opportunities · Full benefits package: medical, dental, vision, 401(k), PTO · Well‑maintained, modern equipment · Local work — go home when your shift ends • A stable company doing essential work that doesn’t slow down Why Drivers Stay At LES, our drivers value job security, consistency, and being treated with respect. You’ll work hard — but you’ll be paid fairly, supported by a team, and have dependable work you can count on. Apply today if you’re ready for steady overnight driving with real earning potential. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description Works with various raw materials in the manufacture of products. Responsible for following specific instructions outlining designated quantities to be used and production times required. Operates various equipment in the manufacture of products; utilizes basic repair tools in performing routine mechanical repairs; operates forklift to load and/or unload raw materials and finished products. Also, coordinates manufacturing efforts and conducts quality control initiatives. Qualifications • Must be able to read, understand and communicate in English to operate machines and interface with PLC control screens, read and complete process orders, complete safety tests., • Must be able to solve simple math problems, +, -, x, /, to accurately record chemical additions, lot numbers, record scale readings., • Must have mechanical ability to operate automated packaging equipment., • Must be able to work with chemicals and machinery safely., • Must have strength and flexibility to bend, push, pull, lift, and climb., • Must be able to work without constant supervision., • Must be able to think ahead and prepare for upcoming batches. Additional Information • 401k with Generous Company Match Bonuses Medical, Dental, and Vision Benefits Paid Parental Leave Life Insurance Disability Insurance Paid time off, Paid holidays Floating holidays + Paid Volunteer Time Wellness/Fitness Reimbursements Education Assistance Professional Development Opportunities Employee Referral Program & More! Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at http://cornerstonebuildingbrands.com. Job Description JOB DETAILS Base pay rate is $18.50 per hour plus $1.00 shift differential 2nd Shift: 5:00PM - 3:30AM, hours may vary depending on operations The shifts are 8 hours, 10 hours, and 12 hours long depending on work orders for the day and season of the year. DUTIES AND RESPONSIBILITIES • Set up and operate heavy machinery and related gauges to perform various cutting, punching, forming, blocking, and processing operations, • Knowledge of production techniques and have the ability to produce quality-building parts, • Knows and understands all safety rules and precautions necessary for working in and about a manufacturing environment, • Ability to operate computerized equipment and material handling equipment, • Perform routine preventive maintenance, adjustments, and lubrication on equipment and production tools as required to maintain proper operation, • Mark part number, order number, number of pieces on parts. Attach identification tags as required for customer to have the ability to locate correct parts, • Interpret blueprints, specifications, and other technical data and select correct raw material or semi-finished parts, • Maintains continuous improvement practices in work area, • Standing and walking 8-12 hrs. every day, • Repetitive material handling. Some in awkward body positioning., • Repetitive climbing on and off of equipment and ladders, • Varying and extreme working conditions inside and outside (Hot, Cold, Rain, Shine)Qualifications, • High School Diploma or equivalent (GED), • A minimum of one year of related work experience in manufacturing or comparable work environment, • Good Communication Skills, • Basic Computer Skills, • Experience with hand tools, wrenches, banding equipment and nail guns, • Able to use of measuring gauges, • Able to read a tape measure, • Forklift experience a plus / Must be trainable on forklift, • Crane experience a plus / Must be trainable on crane, • Flexible with working overtime and weekends when needed, • Ability to lift up to 50 pounds on a continual basis above shoulder height and below the waist Additional Information Site Address: 7301 Fairview St. Houston, TX 77041 This is a position with the potential overtime. The shifts are 8 hours, 10 hours, and 12 hours long depending on work orders for the day and season of the year. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at http://cornerstonebuildingbrands.com. Job Description Base pay rate is $19.00 per hour Day Shift: 6:00AM - 2:30PM, hours may vary depending on operations This is a position with the potential overtime. The shifts are 8 hours, 10 hours, and 12 hours long depending on work orders for the day and season of the year. Responsible for operating machinery that produces metal roofing components for Fortify Building Solutions customers in a fast-paced environment. You should be able to produce basic products without supervision and know when to ask for assistance. Understand that safety and quality are essential to success in our manufacturing shop. You must be a team player; some of our products are ordered the same day the customer receives them. • Must understand the workflow of the metal roofing and related components manufacturing process to be able to complete all tasks in an orderly and timely manner to meet customer satisfaction, • Demonstrate the willingness to be cross trained on all machines in the shop and always follow specific directions and instructions to produce orders correctly, • Setup machinery with little assistance to perform requested operations for customer orders requiring the ability to read a tape measure and have basic math and computer skills, • Constantly work safely and comply with all safety regulations, • Operate machines to produce the correct items for orders while standing in an upright position for extended periods of time and moving about on foot, • Will be trained to use forklift to transport heavy weight metal coils, • Willingness to participate daily in shop cleaning responsibilitiesQualifications, • High School Graduate or General Education Degree, • 3+ years of experience in fabrication/manufacturing is preferred, • Ability to maintain a constant state of alertness and in a safe manner, • Must have a high attention to detail to consistently produce quality product, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Will lift and carry objects up to 50 pounds and more with assistance, • The physical demands of the job include standing, walking, lifting, pulling, pushing, carrying, grasping, reaching, stooping, crouching, and near acuity Additional Information Site Address: 14031 W Hardy Rd., Houston, TX 77060 This is a position with the potential overtime. The shifts are 8 hours, 10 hours, and 12 hours long depending on work orders for the day and season of the year. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job DescriptionDescriptionAbout Us: The Caturus platform founded by Kimmeridge – an alternative asset manager focused on the energy sector – supports Kimmeridge’s overarching goal of providing low-cost energy on demand with the lowest carbon footprint. Kimmeridge’s vision in creating Caturus is to build the only independent, fully integrated natural gas and LNG export platform in the U.S. through a combination of its upstream operations and via Commonwealth LNG, a 9.5 million tonnes per annum liquefied natural gas export terminal in southwestern Louisiana on the U.S. Gulf Coast. The combined entities are committed to delivering responsibly sourced, low-emission fuel to domestic and international markets. Caturus is a Houston-based, private exploration and production company seeking to materially grow production through development of deep, high pressure, dry gas windows of the Eagle Ford and Austin Chalk, as well as Haynesville formations located in Texas and Louisiana while maintaining a relentless focus on safety. Commonwealth LNG was founded by industry veterans who decided to re-engineer the LNG construction model. Using proven best practices, Commonwealth is committed to building a world-class LNG export facility while focusing on safety, managing risk and achieving best-in-class environmental standards. Job DescriptionPosition Summary: The Control Room Operator supports safe, compliant, and efficient operations by identifying production interruptions and equipment issues early, escalating appropriately, and maintaining accurate operational records. While this role does not have formal supervisory responsibility, it is essential for maintaining situational awareness across the asset base, coordinating information between field and corporate teams, and supporting the Production Superintendent in executing operational plans. Key Responsibilities: Lead with Safety • Make safety the foundation of all monitoring decisions and operational communications., • Follow and support company safety policies, procedures, and regulatory requirements., • Recognize abnormal or unsafe conditions through SCADA data and notify field personnel immediately., • Support Stop Work Authority by escalating safety concerns promptly and without hesitation., • Ensure emergency notifications and callout procedures are executed accurately and without delay. SCADA Monitoring and Surveillance • Continuously monitor production, equipment, and flow conditions via SCADA, dashboards, and trend data., • Track wells, tank batteries, compression, gathering systems and facilities for abnormal pressures, temperatures, levels, rates, and run status., • Identify deviations from expected operating conditions and investigate root causes., • Perform remote operations such as starts, stops, setpoint changes, and resets within approved procedures and authority limits., • Monitor tank levels and coordinate with field personnel and haulers to prevent overfills and lost production. Alarm Management and Response • Acknowledge, prioritize, and respond to SCADA alarms according to established procedures., • Distinguish between actionable alarms, nuisance alarms, and instrumentation or communication faults., • Notify Lease Operators, Leads, and Supervisors of alarms requiring field response and confirm resolution., • Escalate unresolved, recurring, or high-consequence alarms to the Production Superintendent and Production Supervisors as appropriate., • Report suspected instrumentation, communication, or automation failures to the Automation team.Communication and Collaboration, • Communicate clearly, proactively, and respectfully with Lease Operators, Leads, Supervisors, Automation, Engineering, and corporate teams., • Provide concise, accurate operational updates and status reports throughout the shift., • Ensure thorough and documented shift handovers, including open alarms, ongoing issues, and pending actions., • Serve as a reliable point of contact for field personnel during after-hours and weekend operations.Data Integrity and Reporting, • Ensure production, downtime, and operational data is entered accurately and on schedule., • Maintain a complete and accurate shift log of alarms, events, actions taken, and communications., • Document downtime events with accurate causes, start and end times, and volumes., • Reinforce attention to detail and accountability in all data entry and reporting. Commitment to Continuous Improvement • Identify opportunities to improve alarm rationalization, monitoring practices, and response procedures., • Recommend improvements to dashboards, screens, and reporting tools to enhance situational awareness., • Participate in post-event reviews and contribute observations and lessons learned., • Demonstrate a growth mindset by seeking guidance when needed and pursuing ongoing professional development., • Practice humility and remain open to alternative approaches, feedback, and guidance. Qualifications • 5+ years of experience in upstream oil and gas operations, control room operations, or a related technical field., • Previous experience in a control room, SCADA, or remote monitoring role is a plus., • Working knowledge of production equipment, facilities, and field processes, including separators, tank batteries, and compression., • Experience with compression, plunger lift, and gas lift is a plus., • Proficiency with SCADA systems, dashboards, trend analysis, and standard computer applications., • Ability to remain focused and make sound decisions during high-alarm volume or emergency conditions., • Solid understanding of upstream oil and gas safety practices, environmental compliance, and regulatory requirements., • Excellent communication skills, with the ability to relay technical information clearly and calmly under pressure., • Strong organizational, problem-solving, and multitasking skills with a high level of attention to detail., • Ability to work independently with minimal supervision while collaborating across multiple teams., • Comfortable working in a fast-paced environment with rotating shifts, nights, weekends, and on-call or after-hours responsibilities., • Shall require occasional holiday coverage, • Ability to sit and monitor multiple screens for extended periods and to occasionally visit field locations in a variety of South Texas weather conditions.

Job DescriptionCompany description Terry Soot Management Group (TSMG) is a field data collection company founded in 2017 in Europe. We collect data where automation is not possible. We count features, take pictures, make videos, record speech, and scan areas for every detail you need to make more informed decisions. Our field data collection teams are spread across Europe and North America, ready to accept new challenges. Role Overview: The Autonomous Vehicle Test Operator is responsible for operating and evaluating a self-driving vehicle in autonomous mode, including collecting data and providing feedback, and offering ride hail service to the general public. Eligibility: • Must be at least twenty-one (21) years old, possess a valid CDL driver’s license, and have at least three (3) years of experience as a Class C licensed driver to operate Class C vehicles.Key responsibilities:, • Operate/Drive autonomous vehicles on both defined and undefined routes, including a variety of environmental conditions - driving (some manual driving but primarily monitoring the vehicle's behavior in autonomous mode) and (ii) software monitoring and logging responsibilities and providing verbal feedback/directions about the autonomous vehicles (AV) environment., • Test other aspects of our autonomous vehicles, • Complete timely and detailed ride reports for our operations and engineering teams, • Must be able to work specific shifts, including early mornings, evenings, and/or weekends, as well as overnight shifts, • Maintain high standard of safety, inside and outside of the vehicle.Necessary skills:, • CDL Driver's License, • Proficiency with a laptop and Office apps (i.e., Gmail, Sheets and Docs), • Proficiency using a handheld device/touchscreen smartphone, • Must have good attention to detail and be able to quickly and concisely describe their thoughts.Physical requirements:, • Occasional standing, walking, and long periods of sitting., • Use hands to finger; handle or feel; and talk or hear; climb stairs and/or ladders., • Occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl., • Must be able to occasionally lift and/or move up to 45 pounds., • Must use close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus., • Most work is accomplished outdoors in a vehicle. We would be happy to get to know you and your skills better and see how we can support each other's growth. Please apply and let's meet! We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Manufacturing Assembler **Job Description Title Manufacturing Assembler Position Information Division Service Reports to (Position) Manufacturing Supervisor FLSA Status Non-Exempt Overtime Eligibility Eligible Position Summary A Manufacturing Assembler is responsible for putting together components or parts to create finished products. They follow blueprints, work instructions, or diagrams to assemble products using various tools and equipment. Assemblers may work in manufacturing or production environments and may be required to perform quality checks and ensure that products meet specifications. They may also be responsible for maintaining a clean and organized work area and reporting any issues or defects to supervisors. Attention to detail, manual dexterity, and the ability to work as part of a team are important skills for an Assembler. Supervision None Essential Responsibilities Build and assemble mechanical components for Switchgear and/or Breaker units according to engineering drawings and customer specifications using master copy, spec sheet, front elevation and WO files Perform maintenance and proper use of tools. Perform in process inspections; ensure quality by following standard work instructions and identifying any potential risks to product quality. Identify and track shortages Perform all ship prep functions including splitting gear. Assist in Root Cause Analysis on engineering changes and correct discrepancies Assist a small team of employees to complete a specific task assigned by lead assembler and/or supervisor Perform final "in process inspections" Perform mechanical adjustments for switchgear Promote a safety culture as well as attend all safety meetings. Ensure that work areas remain clean and well organized. Minimum Qualifications Minimum education level of a High School Diploma or General Education Equivalent Diploma is preferred. 2-4 years of experience in a manufacturing environment preferably assembling medium to large sized metal boxes/enclosures or electrical switchgear Ability to read a tape measure (including conversions from fraction to decimal and conversely from decimal to fraction and metric to imperial). Must have a basic command of the English language, both written and verbal. Basic knowledge of operating desktop computer. Safely use variety of hand/power tools. Lift up to 50lbs using proper lifting techniques. Preferred Qualifications • Basic MES system knowledge, Oracle preferred. Skills, Abilities & Other Requirements Read and understand spec sheets and follow proper use of hardware by spec requirements. Able to read and understand single and three-line drawings, including symbols Able to interpret and execute change orders Able to identify part discrepancies and properly write HFDs for corrections Knowledge of mechanical drawings and designs Ability to follow direction from Lead Assemblers. Effectively demonstrates on-time delivery and the ability to stay focused on goals and responsibilities. Self-starter with ability to take on multiple tasks with a drive to succeed. Challenges the status quo; looks for better or more efficient ways to get results. Ability to adapt to new ideas, technology, processes or product changes. Believes and displays through actions that our customers represent our current success and remain vital to our future growth. Demonstrates integrity and ethical decision making. Conscientious, thorough, accurate, and reliable when performing and completing job tasks. Able to work effectively within your team and around other departments and their activities. Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Working & Environmental Conditions Working Conditions · Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. · Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required. · Must be able to work from all type of ladders (step ladders, "A" frame ladders, etc.) · Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment. Physical Requirements · Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders · Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction · Continuous standing and walking · Able to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently. · Must be able to meet physical lifting demand up to 50lbs. · Frequent use of hand tools and power tools More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. You should be proficient in: • Electrical Schematics, • Machine Building/Assembling, • Tape Measure Reading, • Maintenance and Repair Skills, • Mechanical Assembly Skills, • Equipment Installation, • High School / GED, • Blueprint Reading

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at http://cornerstonebuildingbrands.com. Job Description JOB DETAILS Base pay rate is $19.00 per hour Day Shift: 6:00AM - 2:30PM, hours may vary depending on operations This is a position with the potential overtime. The shifts are 8 hours, 10 hours, and 12 hours long depending on work orders for the day and season of the year. DUTIES AND RESPONSIBILITIES • Set up and operate heavy machinery and related gauges to perform various cutting, punching, forming, blocking, and processing operations, • Knowledge of production techniques and have the ability to produce quality-building parts, • Knows and understands all safety rules and precautions necessary for working in and about a manufacturing environment, • Ability to operate computerized equipment and material handling equipment, • Perform routine preventive maintenance, adjustments, and lubrication on equipment and production tools as required to maintain proper operation, • Mark part number, order number, number of pieces on parts. Attach identification tags as required for customer to have the ability to locate correct parts, • Interpret blueprints, specifications, and other technical data and select correct raw material or semi-finished parts, • Maintains continuous improvement practices in work area, • Standing and walking 8-12 hrs. every day, • Repetitive material handling. Some in awkward body positioning., • Repetitive climbing on and off of equipment and ladders, • Varying and extreme working conditions inside and outside (Hot, Cold, Rain, Shine)Qualifications, • High School Diploma or equivalent (GED), • A minimum of one year of related work experience in manufacturing or comparable work environment, • Good Communication Skills, • Basic Computer Skills, • Experience with hand tools, wrenches, banding equipment and nail guns, • Able to use of measuring gauges, • Able to read a tape measure, • Forklift experience a plus / Must be trainable on forklift, • Crane experience a plus / Must be trainable on crane, • Flexible with working overtime and weekends when needed, • Ability to lift up to 50 pounds on a continual basis above shoulder height and below the waist Additional Information Site Address: 14031 W Hardy Rd., Houston, TX 77060 This is a position with the potential overtime. The shifts are 8 hours, 10 hours, and 12 hours long depending on work orders for the day and season of the year. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description General Assembler Performs duties under the direction of area supervisor and/or lead man in assigned department. This could include the following departments. • Assembly, • Paint, • Fabrication, • Doors Final Assembly Essential job functions: • Plays key role in department metrics including safety; cost; quality and delivery., • Verifies conformance of finished goods., • Ensures quality in every task performed., • Builds product to design specification utilizing drawings., • Maintains a clean and safe work environment., • Adheres to all company general and safety policies. Marginal job functions: • Perform other tasks as assigned by supervisor Knowledge, skills and abilities: • Ability to carry out not only simple but complex oral and written instructions., • basic math skills, • Ability to read and understand English sufficiently., • Ability to operate hand tools including but not limited to drills; grinders; heat guns; rivet guns., • Ability to comprehend additional training in relation to the performing of the work duties., • Ability to cross train and perform many different tasks across multiple departments., • High level of attentiveness and physical coordination to perform the work activities safely and productively. Physical demands: Most of the work tasks are performed in-door and subjected to environmental and weather condition changes. Hours: 8 or more hours per day Week: 40 or more Lunch: Half hour. Sitting/standing: Stands 100 % of the time Environment: Shop is not air-conditioned Stress: Medium Physical task: Must bend, squat, lift, push or pull material up to 50 lbs frequently. Qualifications Standards: • Prior experience in a fast paced manufacturing environment is preferred. Performance Standards: The criteria for evaluation in this position include, but are not limited to, the following: • The ability to communicate effectively with and work with other personnel., • Proper operation of equipment., • Visual observation and periodic verification. Job Posted by ApplicantPro

Job Description Summary Spectrum has been a trusted name for over 50 years, with installations across a multitude of states. In 2023, Spectrum was acquired by Watchfire, one of the largest and most respected LED display manufacturers in the United States. Together, Spectrum by Watchfire continues to set new standards across K–16 education, municipal, professional sports, and recreational facilities. The Assembly Technician is responsible for assembling, testing, and inspecting scoreboards and accessory products to ensure they meet established engineering specifications, quality standards, and customer requirements. This position requires strong attention to detail, the ability to interpret technical documentation, and a commitment to producing safe, high-quality products. The Assembly Technician works collaboratively with production team members, engineers, and other departments to support manufacturing goals while maintaining a safe and efficient work environment. Responsibilities/Essential Functions The following responsibilities are representative of the primary duties of the position and are not intended to be all-inclusive. Additional duties may be assigned by management as business needs require. Product Assembly • Assemble scoreboards, accessories, and related components according to engineering drawings, blueprints, technical documents, and work instructions., • Utilize hand tools and assembly equipment including drills, clamps, pop rivet guns, and other production tools to complete assemblies accurately and efficiently., • Verify that components and materials are assembled in accordance with established specifications and quality requirements. Quality Inspection and Testing • Inspect paint finishes, components, and completed assemblies to ensure compliance with quality and safety standards., • Perform functional testing of assembled products to verify proper operation and identify defects or issues., • Make adjustments, repairs, or modifications as required to achieve product quality standards., • Report quality concerns and assist in implementing corrective actions when necessary. Equipment Operation and Maintenance • Safely operate assembly tools and equipment in accordance with established procedures., • Conduct routine equipment checks and notify appropriate personnel of maintenance or repair needs., • Maintain tools and work areas in a clean, organized, and safe condition. Documentation and Process Support • Maintain accurate production records, inspection results, testing documentation, and modification records., • Follow written work instructions, engineering documents, and production schedules., • Support continuous improvement efforts by identifying opportunities to enhance product quality, safety, and efficiency. Teamwork and Cross-Training • Collaborate effectively with engineers, designers, supervisors, and fellow production employees to achieve production objectives., • Participate in cross-training activities and provide support in other manufacturing areas as needed., • Demonstrate flexibility in job assignments to meet changing production demands. Safety and Compliance • Adhere to all company safety policies, procedures, and Environmental, Health & Safety (EHS) requirements., • Maintain awareness of workplace safety hazards and immediately report unsafe conditions, incidents, or behaviors., • Use tools, equipment, and personal protective equipment (PPE) properly and consistently., • Complete and maintain all required training, qualifications, and certifications. Physical Requirements • Ability to stand and remain on your feet for up to 8 hours per shift., • Ability to frequently bend, reach, push, pull, and perform repetitive motions., • Ability to lift and carry up to 75 pounds without assistance., • Ability to use hand tools and assembly equipment safely and effectively., • Ability to work in a manufacturing environment with exposure to noise, moving equipment, and varying temperatures. Required Qualifications/Skills: • Ability to read, interpret, and apply information from blueprints, engineering drawings, and technical documents., • Ability to read, understand, and follow written work instructions and production plans., • Demonstrated attention to detail and commitment to producing high-quality work., • Strong mechanical aptitude and ability to use hand tools and assembly equipment safely., • Ability to operate Windows-based computers, mobile devices, and company software applications including PYRO, Outlook, Word, Excel, and other assigned business systems., • Demonstrated ability to work effectively in a team-oriented environment., • Strong sense of urgency and ability to meet production deadlines., • Flexibility to adjust work assignments and schedules to support production requirements., • Commitment to workplace safety and compliance with all company policies and procedures. Benefits • Medical, • Dental, • Vision, • Company Paid Life/ ADD, • Voluntary Life/ ADD, • 401K with Employer Match, • Vacation, • Personal Time *Watchfire is an Equal Opportunity Employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. *Legal authorization to work in the US required. We will not consider candidates who need sponsorship, now or in the future, to be legally employed in the US. No H1B, OPT, CPT or other “temporary work authorization” candidates will be considered.

Job DescriptionDescription: Assembly Associate Job Description COMPANY OVERVIEW AlpHa Measurement Solutions is a liquid sensor technology platform serving the complex testing needs of water quality, pharmaceutical, laboratory, and industrial markets with an unmatched combination of precision, reliability, innovation, and flexibility. We are a vertically integrated manufacturer, creating thousands of units and processing several hundred orders and shipments each day for customers throughout the world. We approach the market as both an OEM manufacturer and with our own brands: Van London, ANDalyze, and Aurora Scientific Instruments Our company has over 100 years of liquid sensing experience and is accelerating growth through its recent acquisition by Enpro Inc. (NYSE: NPO). Enpro is a leading industrial technology company manufacturing high-performance proprietary products for the semiconductor, aerospace, and compositional analysis sectors. Enpro companies employ nearly 4,000 associates globally, while AlpHa’s team consists of over 350 employees, including 235 team members in Houston, Texas and 120 in Shanghai, China. Our global headquarters is conveniently located in Houston at the southwest intersection of I-69 and Sam Houston Tollway, just north of Sugar Land. WHAT MAKES ALPHA MEASUREMENT SOLUTIONS SPECIAL At AlpHa Measurement Solutions, we make analytical sensors and instruments that are essential to everyday life. What we do matters; our products are used to test and monitor water quality in industrial, health, and safety applications worldwide. Our sensors are critical for wastewater and drinking water processing, environmental monitoring, pharmaceutical (vaccine) manufacturing, food & beverage supply, power generation, and many other fundamental applications. Municipalities, multinational organizations, and system integrators rely upon our sensors as critical, consumable components of their systems around the globe. We at AlpHa understand the important role we play in ensuring safe drinking water, clean aqueous environments, and the general health and safety of communities worldwide. BENEFITS & PERKS · Medical, Dental & Vision Insurance · Health Savings Accounts (HSAs) · Short-Term Disability · 401k · Life insurance · Paid Vacation · 8 Paid Holidays per year · Paid Jury Duty Leave · Recognition and Reward Programs · Diverse & Inclusive Work Culture Position Summary The Assembly Associate performs all tasks involved in the production of the company’s products. This includes fabrication, filling, sub-assembly, soldering, potting, final assembly, testing, screening, packaging, and packing to established methods and work instructions. The position follows standard work methods and practices safe work habits to ensure production is as efficient and safe as possible. Essential Functions Reasonable accommodation may be made to enable individuals with disabilities to perform the following essential functions: • Read routing and perform work as assigned by department supervisor, • Assemble units per specifications or work instructions, by product number and product type, • Fabricate or modify parts, using provided shop equipment and tools, • Attach appropriate labels to wires, products and packages, • Test product functional performance to ensure conformance to specifications before passing to next operation, • Record any defects or other data as requested by supervisors or managers, • Where applicable, understand serialized processes and trace data through products serial number, • Pack finished goods into correct packages and boxes, • Notify supervisor of any mechanical or material issues, • Maintain a clean and safe work area, • Performs other duties as required and assigned; duties and activities may change over time Required Key Competencies • Ability to Work Quickly and Methodically, • Thoroughness and Attention to Details, • Ability to Follow Instructions, • Willingness to Work Flexibly, • Teamwork Orientation, • Technical Capacity Work Environment While performing the duties of this job, the employee may be exposed to fumes or airborne particles, various temperatures, and moving mechanical equipment. Physical Demands While performing the duties of this job, the employee is required to talk or hear. The position requires the ability to concentrate while doing repetitive tasks. The employee is required to sit, stand, walk, use hands and fingers to handle or feel, and reach with hands and arms. EEO AND CULTURE STATEMENT: AlpHa Measurement Solutions is a subsidiary of Enpro, a leading industrial technology company focused on critical applications across many end-markets, including semiconductor, industrial process, commercial vehicle, sustainable power generation, aerospace, food and pharma, photonics and life sciences. At Enpro, we believe that diversity drives innovation and inclusion fosters growth. We are committed to creating a workplace where everyone feels valued and respected. Our employment decisions are based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, military service, or any other status protected by applicable law. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Human Resources, and we will make all reasonable efforts to accommodate your request. *Enpro Inc. is an equal opportunity employer. Legal authorization to work in the United States is required. We will not sponsor employment visas now or in the future for this job. Requirements: Required Qualifications and Experience High school diploma or GED Preferred Previous production experience Previous experience in production of electrochemical or electronic equipment a plus Must be able to routinely lift 25 pounds Must be able to work in fast-paced environments Occasional overtime to meet business needs Must be conversant in English for safe and effective performance of the job Must be eligible to work in the U.S.

Job DescriptionPosition Summary The Machine Operator may operate a variety of machines in the shop including angle line machine, beveller, saw, shear, oxy or plasma burner, laser cutter, rolling machine, flattening press or machine, shot blaster, manual and robotic welders, press brake, machining center or lathe, and tube or custom laser. Duties and Responsibilities • Commitment to workplace safety., • Set-up and operate machines including adjustment and/or replacement of expendable tooling, guides, jigs and fixtures., • Operate an angle line machine, beveller, saw, shear, oxy or plasma burner, laser cutter, rolling machine, flattening press or machine, shot blaster, manual and robotic welders, press brake, machining center or lathe, and tube or custom laser., • Support the safety and quality programs by following all accompanying rules and established processes., • Other duties as assigned.Skills and Qualifications, • Ability to operate forklift and cranes., • Ability to read and interpret forming blueprints., • Ability to understand customer tolerances, • Ability to use a variety of hand tools such as hammer, pliers, screwdriver, wrench, drill, grinder and bander., • Ability to use measuring tools such as tape measure, square and caliper and micrometer., • Ability to convert fractions to decimals and vice versa., • Ability to convert metric to English., • Provide high quality work to all internal and external customers as related to the output of their position., • Capable of setting up and operating one or more processing machines., • Speak, write and comprehend conversational English., • Strong attention to detail., • High School Diploma or equivalent (preferred). Physical Requirements Ability to lift 20-50lbs. repetitively throughout the course of a shift Ability to bend, sit, stand, twist, and stoop for long periods of time Ability to walk 2-5 miles throughout the course of a shift Have good vision 20/30 with corrective lenses Ability to maintain coordination of hand and finger movements to grasp and manipulate objects of precision Subject to environmental conditions that occur indoors and outdoors which includes but is not limited to exposure to changing temperatures, loud noises and vibration from use of equipment and the following: • Hazards: Variety of physical conditions, such as proximity to moving mechanical parts, electrical parts, electrical current, exposure to high heat or exposure to chemicals., • Atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin fumes, odor, dusts, mists, gases, or poor ventilation., • Oils: There is air and/or skin exposure to oils and other cutting fluids. You should be proficient in: • Blueprint Reading Machines & technologies you'll use: • Press Brake (Accurpress)

Job Description *Work Schedule: Monday-Friday, onsite 5 days a week, Hours: 6am-2:30pm or 7am-3:30pm, Overtime eligible Job Responsibilities: • Follow detailed assembly instructions and processes., • Perform machine setup where applicable; run machines and processes., • Follow Quality Policy and Procedures, OSHA guidelines and regulations governing workplace safety., • Train other employees on job functions and safety requirements, as needed., • Perform other duties as requested by team lead., • Follow all company Quality, Health, Safety and Environmental policies and procedures., • Respond to change productively and handle other duties as required., • Work independently and employ effective time management skills., • Over-time as required. Education and Experience: • Minimum 1-year experience with manufacturing processes., • High School diploma or equivalent preferred but not required. Other: • Physical Requirements: This position requires frequent standing, walking, sitting, balancing, stooping, kneeling, crouching, and crawling activities. In addition, there is frequent reaching and climbing of stairs. There is pushing and lifting / carrying of boxes weighing 35 lbs. Average vision and hearing is sufficient., • Working Conditions: Individual will generally be working in the production area. Noise levels encountered will vary from heavy machining to minimum noise level. Likewise, individual may be exposed to fumes from chemicals, paints, and assembly glues in the manufacturing areas. Please refer to the MSDS Notebook in this department for specific details regarding chemical exposure. Disclaimer: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. EOE/AA/M/F/Vet/Disability

Job DescriptionMachine Operator Position Snapshot We are a seeking a highly motivated, safety-minded individual who wants to work as a machine operator in an industrial manufacturing setting. If you enjoy being hands-on with machinery and utilizing your mechanical interests and skills in a manufacturing environment and being a part of a team, then this position is for you. Essential Duties and Responsibilities A machine operator is commonly expected to know how his/her equipment operates and be able to identify and repair simple mechanical problems like stalls or jams. Workers hired into this position will be trained to operate various machines and learn processes related to manufacturing steel wire products. Mechanical and analytical skills are required for this job. To be successful in this role you will: • Practice safe work habits as an individual and with co-workers., • Work effectively in a team environment., • Adhere to guidelines related to PPE (Personal Protective Equipment)., • Know safety equipment and be aware of machine safety procedures., • Know and understand basic mechanical processes and equipment function principles., • Conduct equipment inspections for proper operation and mechanical integrity., • Assist in the repair and maintenance of machines and facilities as required., • Document production information on tally sheets and make basic production entries into a computer., • Must understand basic mathematical principles and know measurement processes such as length, diameter, weights, and counts., • Assume duties of other operators as required and assist in other areas of the facility as needed. Experience and Education: • Manufacturing experience is a preferred but not required, • Forklift experience preferred, but will provide certification training, • High School diploma or equivalent, • Ability to complete simple forms and understand simple written instructions., • Ability to perform simple arithmetic skills involving addition, subtraction, multiplication, division, fractions, and decimals., • An equivalent combination of education and work-related experience may be acceptable. Physical Demands Workers are frequently required to stand, walk, bend, stoop, crouch, and lift or carry heavy materials—often over 50 pounds—throughout their shift. Tasks will involve operating or working near heavy machinery, using hand and power tools, and performing repetitive motions. Employees must also be able to tolerate exposure to heat, cold, loud noise, and other environmental factors such as dust, vibration, and slippery surfaces. Personal protective equipment (PPE) is required, and physical agility, coordination, and situational awareness are critical to performing job duties safely and effectively in our industrial setting. Work Environment The work environment for this position is an industrial manufacturing plant, with employees regularly exposed to physical and environmental challenges. Workers are continuously (70–100% of the time) around moving and potentially dangerous machinery and are subject to loud noise levels that require hearing protection. Frequently (30–70% of the time), they may encounter heat from both weather and industrial processes, as well as cold weather conditions. Occasionally (up to 30% of the time), the environment may include wet or humid conditions, slippery floors or ramps, vibration from equipment, exposure to outside weather, dust, electrical shock hazards, and contact with oil, grease, or solvents. Proper personal protective equipment (PPE) and adherence to safety protocols are essential in maintaining a safe and productive workspace in this industrial setting. For your hard work, you receive: • Competitive base pay based on experience., • Bonus eligibility based on organizational performance, safety, and attendance, • Paid time off including holidays and vacation, • Excellent benefits to include medical, dental, vision, company paid life/short-term disability/long-term disability insurance, flexible spending accounts (FSA), health savings account (HSA), 401(k) with match, company paid tele-health, stock purchase plan, tuition reimbursement assistance, and Employee Assistance Plan (EAP) These duties may be modified or changed at any time at the sole discretion of management either orally or in writing. The above statements are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of this position. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. INSTEEL is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. If you are qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request accommodation, contact a Human Resources Representative. Applicants must be authorized to work for ANY employer in the U.S. We are unable to consider applicants residing in locations outside the US requiring Visa sponsorship at this time. About the Company: Insteel Industries is the nation’s largest manufacturer of steel wire reinforcing products for concrete construction, including prestressed concrete strand and welded wire reinforcement such as engineered structural mesh and concrete pipe reinforcement. Founded in 1953 and headquartered in Mount Airy, NC, Insteel operates 11 manufacturing plants across the U.S. and has a dedicated engineering services division. As a publicly traded company, our goal is to be the supplier of choice by delivering superior value to our customers. Learn more at insteel.com/careers. Fraud Prevention Notice: Please note that Insteel Industries will never ask applicants to purchase equipment, send money, or provide payment information at any point in the hiring process. We may request certain personal information only after an official offer has been extended and the background check and drug screen have been successfully completed. If you receive a request for sensitive information or payment before these steps, it is not from our company. To protect yourself, please report any suspicious activity to our HR team by calling us at (336) 786-2141. Powered by JazzHR Kushq9G6qF

Job Description About Metrix Metrix is a global leader in industrial condition monitoring and machinery protection solutions. Headquartered in Houston, Texas, we serve customers in more than 40 countries through direct sales and service professionals, along with a strategic network of instrumentation partners. For over 50 years, we have helped leading manufacturers and operators protect critical rotating and reciprocating machinery used in power generation, oil & gas, manufacturing, and other industrial applications. Our innovative products are trusted worldwide for their reliability, simplicity, and performance. Position Summary Perform any combination of the following duties to assemble parts of various materials. Assemble parts in specified relationship to each other, using hand, hand tools, or bench test equipment to meet required quantity and quality parameters. Package products as required for shipping. RESPONSIBILITIES: • Follows detailed assembly instructions and processes., • Performs machine setup where applicable; runs machines and processes., • Follows Quality Policy and Procedures, OSHA guidelines and regulations governing workplace safety., • Trains other employees on job functions and safety requirements, as needed., • Performs other duties as requested by team lead and supervisor., • Participation in Continuous Improvement process, • Participation in Near Miss program, • Must remain up to date on all training (i.e. safety, 5’S ) Additional Responsibilities: • Follow all company Quality, Health, Safety and Environmental policies and procedures., • Respond to change productively and handle other duties as required., • Work independently and employ effective time management skills., • Over-time as required. QUALIFICATIONS: Knowledge & Skills: • Assembly, Testing., • Ability to work independently and as part of a team., • Good communication (written and oral) and interpersonal skills., • Must be a self-starter., • Strong organizational skills., • Demonstrated problem-solving skills., • Working knowledge of manufacturing processes and equipment., • Ability to read and interpret technical drawings and prints., • Ability to read, understand, and follow relevant assembly, testing, and QMS procedures. Education Minimum Requirements/Equivalent: • High School degree or equivalent. Experience: • Minimum 2 years experience with manufacturing processes and electronic soldering experience WORKING CONDITIONS: Individual will generally be working in the production area. Noise levels encountered will vary from heavy machining to minimum noise level. Likewise, individual may be exposed to fumes from chemicals, paints, and assembly glues in the manufacturing areas. Please refer to the MSDS Notebook in this department for specific details regarding chemical exposure. PHYSICAL REQUIREMENTS: This position requires frequent standing, walking, sitting, balancing, stooping, kneeling, crouching, and crawling activities. In addition, there is frequent reaching and climbing of stairs. There is pushing and lifting / carrying of boxes weighing 35 lbs. Average vision and hearing is sufficient. Disclaimer: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Privacy We are committed to the protection and promotion of your privacy. In connection with your application for employment with us at Metrix, please click on this link to view our Applicant Privacy Notice. (metrixvibration.com) Metrix is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description CenTrio is looking for a dynamic Plant Operator to help support our Houston Operations! Onsite- Plant Downtown Houston Must be open to rotating shift work Fulltime & Permanent Who is CenTrio? CenTrio is a fully integrated, innovative and sustainable energy services provider to a wide range of industries such as higher education & healthcare campuses, cities, and communities. It serves more with utility infrastructures serving more than 170+ million square feet of space and operations in 10 cities across the United States and growing. In each community, the company operates highly efficient and innovative utility infrastructures that produce and distribute electricity, steam, hot water and/or chilled water to customer buildings and campuses. Customers connected to these systems enjoy multiple benefits including reduced operating costs, lower emissions and unmatched reliability. CenTrio is a wholly owned subsidiary of a global Infrastructure Investment Consortium with unmatched financial wherewithal and manages a portfolio of long-life, high quality infrastructure assets with high barriers to entry that generate stable and growing cash flows. Job Summary The Plant Operator will be a key member of Houston Plant Operations reporting directly to the Director of Operations. They are responsible for the day-to-day operations, repair and maintenance support duties and troubleshooting of the central utility plants and building mechanical systems. Core Responsibilities • Develop competency in operations of One and Three Houston Center existing plant facilities to ensure that unplanned outages are minimized. Make recommendations to the Operations Supervisor or Lead Operating Engineer to enhance reliability and plant performance., • Coordinate with One and Three Houston Center Building Engineers all things pertaining to daily plant operation. And any planned/unplanned maintenance and/or plant shutdowns., • Develop competency in operations of existing plant facilities to ensure that unplanned outages are minimized. Make recommendations to the Operations Supervisor or Lead Operating Engineer to enhance reliability and plant performance., • Work with the Operations Supervisor and Lead Operating Engineer to perform maintenance programs and procedures., • Develop an understanding of troubleshooting of the plant, distribution system, interface systems and energy transfer stations. Work in a safe manner while following applicable regulatory requirements., • Follow plant operational procedures to ensure the accomplishment of plant production goals. Monitor and report on system performance to meet or exceed plant production goals., • Investigate, take corrective action, and report on plant outages in an effort to minimize impact to customer services. Manage outage timetables that optimize cost effectiveness while insuring reliability., • Develop proficiency as a plant operator in conjunction with cultivating skills in the, • Calibration and troubleshooting of automation, power, and interface systems., • Will be available on a 24-hour basis, to assist in emergency situations and fill vacancies in the shift rotation as directed by the Operations Supervisor., • Track and log operational system status using applicable journals and control system tools. Understand system-operating requirements, identify trends, perform routine analysis and make recommendations for operating adjustments., • Perform maintenance and repairs on building mechanical, electrical and plumbing systems., • Must learn to operate USP plant Working Style to Be Successful in This Role: • Demonstrates exceptional initiative and execution skills, • Must be self-motivated and proactive to seek methods to change and /or enhance plant environment, • Able to work independently with minimal supervision, • Strong commitment to deadlines and team, • High professional and ethical standards are expected., • Collaborative with excellent interpersonal skills. Capable of developing and maintaining positive relationships internally and externally, • Willing to work any hours necessary to ensure plant operations are conducted in a reliable method . flexibility is shift work is a must., • Ability to work in a dynamic, complex, fast-paced environment, to adapt quickly and to manage changing priorities. Professional Experience & Knowledge: • High School Diploma or GED is required. Additional studies and courses in a technical discipline would be a plus. Training, licenses, or certifications in plant operations considered advantageous., • One (1) to five (5) years’ experience in operations, maintenance and troubleshooting of central heating and cooling plants. Technical Skills & Requirements: • Highly analytical with a keen attention to detail, • Process oriented, • Delivers high-quality work with speed and accuracy, • Demonstrated strong oral and written communication abilities, • Excellent foundation in the maintenance and troubleshooting of central heating and cooling plants, • Understanding of mechanical, electrical, and plumbing systems is required Why Join CenTrio? CenTrio offers a dynamic and friendly work environment, dedicated to nurturing a top-notch team culture! Additionally, CenTrio offers an array of fabulous benefits and perks. • Medical Benefits first day of hire, • Medical, dental, vision, Life & AD&D benefits, • Option of supplemental Life & AD&D benefits, • Company paid High Deductible Healthcare Benefit Plan, • 401k plan with 5% match, • Training Opportunities and career progression, • Competitive salaries that reflect the value of skills and experience, • Dynamic and friendly work environment in a rapidly expanding industry with a national presence, • Remote, Hybrid, and In Office schedules available dependent on job responsibilities, • 24-hour Employee Assistance Program/Hotline, • Corporate discounts (Travel, Entertainment, Home, Auto, Apparel, Health and Wellbeing, and other various retail options) Conditions of Employment: • Successful completion of pre-employment screenings, • Valid Texas State Driver’s License, • All certifications/licenses must be up to date, • CenTrio strives to create a culture of health and wellness. As of December 1, 2021, and consistent with applicable state law, CenTrio will decline to hire individuals who use nicotine products. (WASHINGTON, COLORDAO, MICHIGAN and TEXAS ONLY) Health, Safety & Environment (HSE) CenTrio maintains a steadfast commitment to a proactive safety culture, with HSE being a collective responsibility throughout the organization. Your HSE accountability also encompasses: • Promote, ensure, and maintain a safe and healthy environment for your fellow workers and yourself so that everyone goes home injury-free, • Work in compliance with the provisions of the Occupational Health and Safety Act, Industrial Regulations, Environmental Protection Act and Regulations and HSE policies, programs, and procedures, • Responsible for identifying and reporting workplace HSE hazards and concerns to your supervisor immediately and providing solutions (if aware of any) to address these concerns as requested, • Immediate reporting of all work-related injuries/illness to your supervisor, • Adhere to various PPE requirements of the position which may include hearing protection, eye protection, hand protection, steel toe footwear, head protection, fall-protection, respirators (half-face and full-face) DISCLAIMER The preceding position description is intended to provide the general nature and level of work to be performed by employees within this classification. It is not intended to be a detailed description of the position or be interpreted as a comprehensive listing of all duties, responsibilities, and qualifications required for this position. DIVERSITY STATEMENT We know that our greatest strengths come from the people who make up our team. CenTrio is committed to the creation and nurturing of a diverse community of individuals through inclusive excellence. Diversity involves recognizing the value of differences and the inclusion of all members of the community including those that experience discrimination or under representation. This is a core value of the organization as we strive for a culturally diverse work force that reflect the multicultural nature of the nation and our world and bring unique strengths and abilities which contribute to CenTrio.

Job Description Full Job Description – Extrusion Machine Operator LOCATION Missouri City, TX (Greater Houston Region) https://goo.gl/maps/FHMM8MHNxJCRj1DS6 COMPANY BACKGROUND The 3D printing industry is one of the most exciting and fastest-growing industries in the world today and Polymaker is part of the momentum. Polymaker develops, produces and markets high value materials for 3D printing. Our company is growing rapidly and can be described as young, open and energetic. Polymaker has been active in the US since 2013. We have built up a network of channel partners who serve end-users from all over the United States. Our end-users are hobbyists, professionals and industrial customers who 3D print high quality parts using our filaments. From our 40,000 SF facility in Missouri City, TX, we currently manage the production, sales, marketing, planning, and distribution of 3D printing filament for the North America region. POSITION SUMMARY The Extrusion Machine Operator is responsible for operating all equipment on an extrusion line. Extrusion line equipment consists of pellet hopper, pellet feeder, extruder, extrusion bath, tensioner, winder, and spool take-off. POSITION TYPE Full Time, Hourly The Extrusion Machine Operator reports directly to the Shift Lead. Key Responsibilities • Operation of a single or twin-screw plastic extruder, including material preparation, equipment setup, winding, and cleaning, • Document production rate against shift plan and complete work order information, • Document all equipment, material, and quality issues during shift, • Follow all process work instructions, • Follow all company environmental, health, and safety standards, • Stop work authority – STOPS all work if unsafe conditions are identified, • Communicate areas of improvement Key Expectations: • 12 Hour Shifts; from 3 – 4 shifts/week (alternating schedule), • Reliable transportation to and from the facility, • Occasionally lift up to 50 lbs, • Walking, standing, bending, lifting, and reaching are normal expected movements during a shift, • Previous experience working in a manufacturing or refinery facility, • Willingness to learn and teach others, • Open to taking both direction and feedback from others, • Willingness to learn and adopt core values of the company Preferred Experience Background • Previous extrusion experience, • Previous plastic manufacturing experience To learn more about Polymaker, please go to • www.polymaker.com, • Linkedin.com/company/polymaker-3d

Job Description 1ST Shift - 7AM - 3PM This position is responsible for working in at least one (1) production area to ensure customer requirements are met. This person will also follow all safety procedures and assist fellow co-workers as needed. This person will work with moderate supervision and will receive most directions from the Shift Leader or Supervisor. Essential Duties And Responsibilities Will Include The Following: Additional duties are described in the Quality System Procedures Manual, Work Instructions, and/or Job Training Checklist as applicable. Other duties may be assigned as required to fulfill the objectives of the department and the Company. Scope General cleaning removing all the debris and powder that has built up around the processing machines, floor and on items around the facility Removing discarded material from the internal floor drains so the washdown water can flow properly in the drains Using pneumatic air tools to chisel years of built-up paint and resins that has built up over the years Cleaning of the machines i.e., grime using solvent cleaners and scrapers and power tools to prep ready for painting again challenging in this climate Painting of machines using rollers and brushes etc., also floor markings to be carried and supporting the 5S process with housekeeping activities Changing of Filters to ensure proper air flow to dust collector and air handling units. Here are the Basic Skills Required: Knowledge of basic safety practices and proper PPE usage Ability to follow work instructions, procedures, and supervisor direction (Read in English) Basic understanding of production processes and equipment operation Ability to maintain clean and organized work areas (5S/housekeeping) Willingness to perform physically demanding tasks (cleaning, scraping, lifting) Basic mechanical aptitude and ability to use hand and power tools Ability to identify and report equipment, product, or safety issues Effective communication skills, especially during shift handovers (Speak and understand English) Teamwork mindset and willingness to assist co-workers and maintenance Ability to work with moderate supervision and stay on task Awareness of environmental requirements (dust control, waste handling) Basic problem recognition and escalation skills Reliability, accountability, and adherence to company policies Must be able to lift 55lbs Forklift experience is preferred Responsibilities Maintains clean, safe work areas and minimizes material spillage Strives to achieve all production and quality goals. Assists maintenance when directed by Shift Leader. Communicates with all employees, particularly those from a proceeding/following shift to ensure everyone understands the status of products, equipment, quality, etc. Follows all Company policies, practices, and procedures. Immediately alerts Shift Leader when a problem (equipment, product, personnel issue) is encountered. Empties process dust collectors, dust collectors and central vacuum systems and ensure area stays in compliance with environmental permits Cleans equipment between products to ensure there is no cross contamination from product to product.