Equipment operator jobs in Bayonne, New JerseyCreate job alerts

Job Description JOB TITLE: Motor Assistance Vehicle (MAVT)/ Motor Assistance Vehicle Operator (MAVO) REPORTS TO: Operations Manager WAGE/HOUR STATUS: Nonexempt The Motor Assistance Vehicle Technician/Operator (MAVT/MAVO) is responsible for all aspects of patients’ care within the scope of certification. This position transports ambulatory patients to and from residences and/or skilled nursing facilities to medical treatments and/or appointments in a professional and caring manner. All employees of Mass Transportation Services LLC are expected to act with integrity, support organizational goals, communicate in a clear and respectful manner, championing the needs of our patients & staff and drive continuous improvement. QUALIFICATIONS: Required: • High School graduate or GED from an accredited institution, • Valid and clean driving record, • Clear and valid NJ commercial driver’s license (CDL), • Current MAVT/MAVO Certification, • Ability to receive and give verbal instructions clearly and effectively, • Ability to work as a team, • Ability to multi-task, • Ability to maintain customer-oriented attitude and emotional control under stress MAJOR RESPONSIBILITIES AND DUTIES: • Safely load, secure and unload wheelchaired-bound patients, • Provide patients with emergency care as needed by utilizing appropriate techniques and equipment, • Must be able to push, pull and turn wheelchair with patients into and out of facilities following appropriate protocols, • Document patient information, condition, and care, • Operate and drive company vehicle in conjunction with applicable safety policies and laws, • Maintain all required physical and computerized logs, worksheets, files, and reports, • Perform all other duties as assigned. WORKING CONDITIONS: The usual and customary methods of performing the job’s functions require the following physical demands: physical mobility, prolonged sitting, repetitive hand and arm motions, carrying, pushing, and/or pulling and lifting up to 200 pounds. Able to drive long distances daily. Mental demands: Maintain emotional control, ability to effectively communicate. Environmental Conditions: Work outside and inside; moderate exposure to extreme temperature (hot and cold) and vehicle fumes. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The foregoing statements describe the general purpose and responsibilities assigned to this job and are not an exhaustive list of all responsibilities and duties that may be assigned or skills that may be required.

Job Description The Opportunity We’re expanding and as our business grows and our product range broadens, we’ve found it necessary to make significant investments in our organization. Similarly, we’re investing in our people and are looking for someone who’s personally supportive of our customers and equally driven to deliver exceptional products for our market. We're looking to add a Production assistant to our team to help streamline our manufacturing processes. This role will be directly reporting to Production Manager, it demands high attention to detail and a proactive approach to overcoming challenges and facilitating smooth workflow during daily manufacturing activities. As a Production Assistant, you will support day-to-day operations, adhere to safety standards, and contribute to the success of our team and our products. Job Responsibilities • Processing "End of Day" transfers and assemblies within the ERP systems and other databases and tracking tools. This includes recording incoming assemblies and transfers from subcontractor as well as internal production assemblies and transfers to sales. This requires remaining in close communication with the assembly and packaging teams as well as troubleshooting with the Finished Goods Warehouse Team as needed to resolve issues/discrepancies., • Support assembly line Managers, ensuring materials are replenished as needed, and any needs are met., • Work collaboratively with Line Managers and other team members to meet production targets., • Compile production documents, reports and schedules, accurately and timely., • Perform office administrative duties as required by the Production Department, including but not limited to data entry for daily inputs and outputs, internal and external transfers., • First point of contact for Line Mangers material needs and other missing supplies., • Assisting the Production Team members in collecting and managing production line data. This includes data related to line headcount, operator timings, output and others., • General data entry and production assistance as needed. Required Experience & Qualifications • High school diploma or equivalent., • Experience in a manufacturing setting, ideally 1-2 years in garment manufacturing., • Strong organizational and communication skills., • Proficiency with Excel, previous experience with ERP systems (NetSuite) is a plus., • Ability to stand for extended periods., • A keen eye for detail and commitment to quality.

Job DescriptionMay Ship Repair is seeking a Plasma Cutting Table Operator to join our team at our shipyard facility. The ideal candidate will have experience operating CNC plasma cutting equipment and reading technical drawings in a fast-paced industrial environment. Key Responsibilities: • Operate CNC plasma cutting table to cut steel plates according to work orders and drawings, • Load and unload materials on the cutting table using overhead cranes or forklifts, • Interpret technical drawings, nesting layouts, and cutting programs, • Perform daily equipment checks and preventative maintenance, • Ensure parts are labeled, organized, and ready for welding or fitting, • Maintain accurate records of material usage and part traceability, • Follow all safety protocols and report any equipment or safety issueQualifications:, • 2+ years of experience operating CNC plasma or oxy-fuel cutting tables, • Ability to read and interpret blueprints and CAD-generated cut files, • Familiarity with steel plate types, grades, and thicknesses used in marine work, • Basic computer skills to load and adjust programs on the controller, • Experience using measuring tools (tape measure, calipers, etc.), • Ability to safely operate forklifts and overhead cranes (preferred), • Strong attention to detail and commitment to quality workPhysical Requirements:, • Ability to stand, bend, and lift heavy materials (50+ lbs), • Comfortable working in an open-air or industrial environment, often near heavy equipment, • Capable of wearing appropriate PPE (Personal Protective Equipment)Work Schedule:, • Monday to Friday, 7:30 AM – 4:00 PMEOE

Job Description Now is a great time to join our growing company! The Millennium Group (TMG) is an award-winning business process outsourcing firm focused on print, mail, document scanning, reception, and related office support services for Fortune 500 companies, professional service firms, and institutions of higher education. TMG is looking for highly motivated, enthusiastic team players interested in a career rather than just a job. With a team of over 1,500 nationwide associates, TMG is seeking an individual who can uniquely contribute to our 30+ years of success in the industry. Responsibilities: • Collect data for reports and prepare monthly reports., • Maintain records and files., • Train, monitor and discipline employees., • Prepare employee appraisals and evaluates employee performance., • Interview candidates for open positions., • Ability to demonstrate a high level of problem solving skills., • Ability to deal with difficult or irate customer periodically., • Maintain, review and update site Operations Manual., • Educate client staff regarding available services., • Interact with various vendors on client's behalf and maintain vendor relationships., • Review departmental charges and post client chargeback's., • Reviewing and coding of courier invoices., • Ensure priority handling of all incoming accountable deliveries including messenger packages., • Ensure equipment is in good working order and have the ability to perform key operator maintenance., • Maintain inventory and oversee distribution of client office supplies, • Interface with the client contact daily and attend meetings as required., • Keep Operations Manager informed of operational efficiencies and potential problems., • Resolve staff interpersonal conflicts., • Other duties as assigned. Qualifications: • Must have good working knowledge of mail, shipping, receiving & scanning., • Excellent administration and computer skills., • Knowledge of US Postal, UPS shipping and other shipping software as needed., • Ability to lift up to 50 pounds., • Must be flexible to adapt to changes and multi-task., • Able to nurture and foster team work from subordinates and client., • Must demonstrate leadership qualities. Able to set priorities and motivate others., • Must have strong written and verbal communication skills., • Excellent customer service skills and ability to deal with difficult or irate customer periodically., • Ability to demonstrate a high level of problem-solving skills., • Must be able to perform the work of those whom they oversee., • Must have good working knowledge of mail, shipping, receiving & scanning, • Please acknowledge your acceptance by signing and returning this letter to me via email. Job Posted by ApplicantPro

Job Description We are urgently hiring for several CNC Press Brake Operators with Amada or TRUMPF machine experience. The CNC Press Brake Operator will set up and operate their CNC Press Brake machine to bend and form sheet metal components for telecommunications equipment. This is a Direct Hire opportunity with company and Union benefits. CNC Press Brake Responsibilities • Set up CNC Press Brake machine to appropriate tooling, adjusting back gauge, and inputting bending parameters, according to specifications, • Load sheet metal material onto Press Brake and position in place using clamps or fixtures, • Operate Press Brake to bend, shape, and process sheet metal components, • Inspect finished parts for quality and accuracy, • At least 2 years of experience as CNC Press Brake Operator, • Knowledge of Sheet Metal Manufacturing, • Inspect parts with micrometers, calipers, and gauges, • Interpret blueprint readings, technical drawings, and specifications Hours: 3rd Shift overnight Pay: $26.40 – $29.70

Job Description Job Title: Reach Truck Operator Location: Elizabeth, NJ Shift: 2nd Shift Pay: $18.50 per hour Job Summary: A busy distribution facility in Elizabeth, NJ is seeking a skilled Reach Truck Operator for the 2nd shift. This position is responsible for moving, stacking, and organizing products throughout the warehouse while ensuring safety and accuracy in all tasks. Key Responsibilities: * Operate a reach truck to move pallets and materials safely and efficiently * Load and unload trucks and containers as needed * Accurately pick and stage orders for shipment * Perform regular equipment checks and report maintenance needs * Assist with cycle counts and inventory control * Maintain a clean and organized warehouse environment * Follow all safety protocols and company policies Qualifications: * Prior experience operating a reach truck required (certification preferred) * Ability to lift up to 50 lbs and perform physical work throughout the shift * Previous warehouse/distribution experience strongly preferred * Strong attention to detail and commitment to workplace safety * Dependable and punctual with a team-oriented attitude Schedule: 2nd shift, full-time. Overtime opportunities may be available depending on workload. Apply Today! Call Express Employment Professionals of Union, NJ at 908-493-5890 to learn more.

Job Description Job Title: Traffic Operator- Over Nights Salary: $30/hr-$35/hrLocation: Northern New Jersey / New York City Company Overview:Drive Integration, LLC (DI) is a certified Disadvantaged Business Enterprise (DBE) and Women-Owned Small Business (WOSB) specializing in infrastructure design, network engineering, hardware/software integration, installation, and equipment vending services. We support agencies and businesses with innovative technology solutions and are proud to serve major clients including NJDOT, SEPTA, PennDOT, and others across the Mid-Atlantic region. Position Description:The technician will play a key role in monitoring closed-circuit TVs, radio communications, police and fire scanners, incident detector devices, and assess roadway conditions for traffic, weather, and overall operations. Provides traveler information in the event of an accident by activation of highway advisory radio devices and dynamic/variable message boards. Reports and notifies maintenance personnel of highway incidents or weather conditions. Notifies State Police of vehicles that must be removed that may pose a safety hazard. Performs other related duties as assigned. Responsibilities include: • Maintaining and troubleshooting network devices, camera systems, access control, and vehicle tag readers., • Performing firmware and configuration updates on network systems., • Incident coordination in ITSM tool, • Collaborating with support teams to ensure systems are fully functional and aligned with customer needs., • Remote technical support for systems users, • Explaining issues and solutions clearly to clients., • Building and maintaining customer relationships., • Performing additional duties as assigned.Requirements:, • Valid driver’s license and clean driving record., • Relevant experience in traffic or road construction, or similar fields., • Availability for flexible shifts, including weekends and on-call rotation., • Physical capability to perform tasks that include bending, lifting up to 50 lbs., and working in confined spaces., • Proficiency in MS Word, Outlook, Excel, and Teams., • Knowledge of LAN/WAN fundamentals and troubleshooting experience with Windows and MS Office., • Strong English communication skills, with additional languages (Spanish, French, or German) as a plus. Drive Integration, LLC is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description What You Will Do: Southern Cross has immediate openings for Entry-Level Technicians that will be in areas in/around Tarrytown, Bronx and Queens, NY to include all boroughs. Responsibilities include: • Manage daily assigned tasks for safety, quality, and efficiency to exceed customer expectations, • Schedule and plan work efficiently, • Follow all safety rules, • Follow organizational policies and procedures, • Keep Operator Qualifications current, • Interact with the public, client’s customers, and client’s personnel professionally, respectfully, and cordially, • Accurately complete task reports and work-related reports in a timely manner, • Technical aptitude and past/former technical training is a plus, • Computer and Smart Phone literate, • Field Technicians must be able to read maps and navigate congested areas in large cities, • **All Field Technicians are Required to successfully pass all Operator Qualification training, and testing pertaining to meter work/meter reading to proceed with employment., • High school diploma or GED, • Must have a good driving record and hold a valid driver’s license., • Good vision with or without correction., • Physically able to bend, squat and move heavy objects and use a pipe wrench and other hand tools and to lift and reach overhead, • Hours are 7-3:30 M-F (work hours may vary dependent on client needs to include weekends), • Compensation: Starting Pay of $22.00 - $24.00/hour (depending on experience) There are also .50 cent raises after 60 days and 180 days Southern Cross Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability, or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

Job Description Job Description: 3rd Shift Industrial Maintenance Technician Full-time Shift(s): MON - SUN 11:00pm - 7:00am Location: Hillside, New Jersey OVERVIEW: You will be responsible for doing maintenance and also being an operator who is responsible for the overall reliability/efficiency of assigned production line/equipment. REQUIRED POSITION QUALIFICATIONS: • Make repairs to production equipment as required or directed, • Complete all preventative maintenance as assigned, • Maintain a safe and orderly production equipment area, • Highly motivated, self-directed, • Learn and perform multiple tasks in a fast-paced environment, • Work independently as well as in a team environment, • Willingness to work a flexible schedule, • Perform operator preventative maintenance on production equipment, • All other duties as assigned EDUCATION / SKILLS / EXPERIENCE: • High school diploma, Associates or Trade School, • Minimum of 3-4 years of mechanical experience, electrical skills strongly desired as well, • Troubleshooting, • Preventative maintenance and repairs, • Extreme attention to detail, • Experience in machine operation PREFERRED POSITION QUALIFICATIONS: • Previous experience maintaining industrial equipment, • Mechanically inclined

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under direction performs various tasks in operation and distribution of the water system for the City of Hoboken including but not limited to distribution, sampling and metering. Primary Duties/Responsibilities: • Locate, inspect, test and operate fire hydrants (including flushing), water service line valves, system valves, water meters, and other appliances. Makes repairs or applies maintenance as needed., • Responds to and investigates complaints regarding water quality and system pressure., • Inspects water service repairs to determine if work is done in compliance with local ordinances., • Makes special inspections of water meters and/or water service facilities when complaints are received., • Make inspections of water service installations and make suitable recommendations as to findings, • Keeps needed records as required by Veolia Hoboken., • Utilizes electronic equipment for purpose of record keeping, daily work sheet logs, and mapping and system information updates. This will include GIS / GPS operations., • Maintain and update all reporting databases as required., • Conduct safety audits and inspections of work performed by contractors and third parties., • Performs sampling work for the City of Hoboken; including collection of bacteriological, compliance and analytical samples. Prepares, checks, tests and records data as required. Delivers samples to lab. Maintains necessary supplies to conduct sampling., • Ability to work in emergency situations and remain on the job until repairs have been completed., • Must participate in emergency stand-by rotation and must respond to the job site within 45 minutes of notification. Ability to be on stand-by., • Maintains a detailed and accurate logbook of all sample collection information to ensure accurate chain-of custody information and assumes responsibility for the integrity of all samples collected and of all analyses performed., • Performs all functions relating to meters including setting, changing, disconnecting, repairing, field testing for large meters and reading (final reads, special reads, and high bill investigations)., • Removes, changes, installs and/or repairs MIU's (Meter Interface Units)/ radio., • Locates and operates curb stops and valves, water services, meters, and recording equipment., • This position is based in the water distribution system and work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbent may be exposed to noise, dust, fumes, gases, greases, oils, solvents, and vibrations., • Incumbent may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, and ladder/scaffolding, below ground and may be exposed to water and other liquid materials.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • 3 - 5 years of experience in a utility, preferably similar industry., • 3 - 5 years of experience in construction or maintenance., • Ability to work independently and manage time., • Knowledge in methods, practices, procedures, materials and equipment associated with the construction, maintenance and repair of water distribution systems., • Ability to effectively oversee contractors., • Ability to accurately read and interpret engineering plans and drawings, • Ability to communicate effectively both orally and in writing., • Ability to handle multiple deadlines and multiple projects., • While performing the duties of this job, the employee is frequently required to stand, walk or sit; reach with hands and arms, climb or balance; kneel, crouch or crawl., • The employee must frequently lift and/or move up to 50 pounds., • Specific vision abilities required include close vision and distance vision as well as the ability to distinguish color and shades. Additional Information Pay Range: $27.60 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Who We Are South Oxford Management is a full-service property management company with locations in over five states! We are dedicated to offering an exceptional experience to our residents and team members. Our team brings years of expertise in the industry to South Oxford Management, assuring quality in every aspect of our business. From management to leasing, we are passionate about making positive experiences for people. Putting people first is our mission. When you join South Oxford Management, you become part of a team, where you are encouraged to learn, share ideas, and participate in team building and charitable activities. We reward innovation, fresh perspective, hard work and above all, values. How You Will Contribute The Maintenance Technician serves an integral role in the success of the community. They insure a safe, secure and comfortable living environment for residents, future residents, visitors and team members. They are responsible for maintaining the appearance of the community and the function of each apartment home. Things You Will Do • Provide outstanding customer service to residents and future residents, • Take pride in the apartment community; visually inspect and address areas of concern, keep community clean and make note of service needs, • Be mindful of the condition of the community and initiate action to correct unsafe conditions; e.g. broken gates leading to pool, broken steps, open holes, broken/burned out exterior lights, • Think safety first and ensure that unsafe conditions are corrected promptly, • Diagnose and perform maintenance/repairs including but not limited to HVAC, plumbing, electrical and pool maintenance, • Inspect and help coordinate all make-ready repairs and services, • Report major repairs and needs requisitions to maintenance supervisor and property manager, • Remove and transfer of appliances, abandoned furniture and equipment, • Schedule and perform routine preventive maintenance, • Communicate effectively with residents, future residents, visitors, vendors and team members while presenting a positive, professional image, • High School diploma or equivalent, • You must have a valid driving license., • General knowledge of all things pertaining to property maintenance, • Skill in the safe use and maintenance of hand and power tools, • Willingness to work a flexible work week including weekends and on-call hours, • Able to multitask and meet deadlines, • Knowledgeable of pertinent laws including EPA and OSHA regulations, • Certified Pool Operator, Universal Freon License, including R410A preferable South Oxford Management is proud to provide training and licensing opportunities for experienced individuals ready to take the next step. What We Will Provide You South Oxford Management provides a range of insurance options and benefits for our full-time team members. Including: • Comprehensive training, • Competitive salaries and bonuses, • Paid vacation, sick days and holidays, • 401(k) plan with a company match, • Medical (Low PPO, High PPO), • Dental (PPO, HMO), • Vision, • Employer Paid Basic Life Insurance, • Employer Paid Accidental Death & Dismemberment Insurance, • Employer Paid Long Term Disability, • Employee Referral Program, • Employee Apartment Discounts, • Employee Awards and Recognition South Oxford Management LLC is proud to be an Equal Opportunity Employer EOE/M/F/D/V/SO. South Oxford Management LLC is committed to providing a work place that is free from the use, sale, possession, or distribution of illegal drugs and alcohol as well as free from the abusive use of legal drugs or alcohol. All job applicants are required to take and successfully complete a drug and/or alcohol test before they will be permitted to begin employment. Applicants that refuse to take a test or do not cooperate with the test representatives will not be permitted to begin employment. If a test yields a positive result for drugs or alcohol, the Company may withdraw the offer of employment to an applicant where permitted by state law.

Job DescriptionDescription: Job Overview For more than 70 years, Heatherwood has been committed to building upscale residential rental communities, commercial properties, and luxury urban spaces. Our commitment to quality constructions, striking designs, and providing exemplary service, makes us one of the most highly regarded leaders in the industry. Additionally, we offer a competitive benefits package including health & dental, and vision insurance, 401(k), and paid PTO. Heatherwood is on a mission to create high-quality places that inspire a genuine sense of community. As a Maintenance Tech II for Heatherwood, you are the driving force in providing great service to our residents in a fast-paced, challenging, and rewarding environment. Your Responsibilities: • Apply a “Safety First” approach to every day at Heatherwood., • A minimum experience of 2+ years of multifamily residential, commercial, or hotel maintenance, or similar experience., • Maintain the property's interior and exterior standards., • Openness and approachability to feedback and consistent communication, • Understanding and experience with the following mechanical systems, but not limited to: HVAC equipment, plumbing (water heaters, drain clearing, fixture replacement and repair), minor electrical repair, appliance repair, drywall prep and repair, painting, and carpentry., • Knowledge of building systems including fire sprinklers, fire alarms, and central mechanical/HVAC systems, • Solid understanding of general building maintenance, work order management, and apartment make-ready process., • Ability to effectively troubleshoot and problem-solve maintenance issues., • Shared responsibility of “On-Call” schedule with your property and other Heatherwood property teammates., • Job responsibility requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, kneeling, stooping, crawling, and climbing. This list is an example of the Maintenance Technician II's responsibilities but is not an all-inclusive list of job descriptions. Business needs will dictate additional responsibilities. Requirements: What you bring to Heatherwood: • A positive attitude, • Reliability and dependability, • Team first approach to every day, • Willingness to learn new tasks., • A customer-first approach to providing world-class maintenance and service., • Ability to take direction from a supervisor and work independently through task completion., • Commitment to completion of time-sensitive tasks., • Computer and smartphone skills are required., • Effective written and verbal communication., • Ability to work independently and complete assigned tasks., • Safe understanding of hand/power tools and use of PPE (Personal Protective Equipment), • Flexibility to work overtime and weekends., • Attention to detail and consistently doing the job right the first time., • Valid driver's license. Your Development: • Heatherwood Safety Culture – monthly team safety training, • CPR certification is required at locations with Level 4 Pool Supervision Requirements, • How your success in maintenance contributes to the community's goals, • How to effectively manage your time and communicate in a fast-paced setting., • Pool and Spa training. Support in obtaining CPO (Certified Pool Operator) certificate., • HVAC training and support in obtaining HVAC Universal License., • Ongoing maintenance training and development and internal company growth opportunities.

Job Description Equipment Delivery Driver (Mini Crawler Cranes) - Hillside, NJ We are currently looking for equipment delivery driver that have the ability to work as part of a small, fast-moving team. To work with us, you must be able to operate independently, with limited oversight and have the needed communications- and service-based skills to interface with our customers. As a driver, you will be responsible for customer equipment (Mini Crawler Cranes) delivery and pickup, and basic training. In support of those responsibilities, you will need to provide end-customer equipment familiarization and equipment pre- and post-rental inspections. Driver Primary Responsibilities: Customer Support: • Transport rental equipment (mini-crawler cranes and boom trucks) to customer location in a safe, timely manner, • Report to Expediter to schedule customer service deliveries, • Inspect rental equipment with customer and provide training before handover, • Maintain satellite location inventory, parts, and consumables, • Report to supervising Expediter to schedule customer service deliveries and support, • Perform corrective maintenance actions, as required and post rental inspections, • Willingness to drive in New York City and surrounding areas., • Certificate, diploma, degree, or proof of education or applicable experience with a focus in a transport field, • Ability to work independently, • Willingness to learn, • Attention to detail, • Self-motivating personality, • Good communication skills, • Well-spoken when addressing customers and other employees Please email a cover letter and resume to to be considered for an interview. Company DescriptionSmiley Lifting Solutions is the exclusive North American distributor for UNIC Cranes and SPYDERCRANE Mini-Crawlers. With our lineup of Boom Trucks, SPYDERCRANE Mini-Crawlers, MAVLift Mobile Glass Lifts, Marine Cranes, Pick and Carry Cranes and Aerial Lifts, we provide thousands of industries with extremely useful tools.Smiley Lifting Solutions is the exclusive North American distributor for UNIC Cranes and SPYDERCRANE Mini-Crawlers. With our lineup of Boom Trucks, SPYDERCRANE Mini-Crawlers, MAVLift Mobile Glass Lifts, Marine Cranes, Pick and Carry Cranes and Aerial Lifts, we provide thousands of industries with extremely useful tools.

Job Description Overview With venues in 74 countries, including 183 cafes, 27 hotels and 12 casinos, Hard Rock International (HRI) is one of the most globally recognized companies. Beginning with an Eric Clapton guitar, Hard Rock owns the world's most valuable collection of music memorabilia, which is displayed at its locations around the globe. Hard Rock is also known for its collectible fashion and music-related merchandise and Hard Rock Live performance venues. HRI owns the global trademark for all Hard Rock brands. The company owns, operates and franchises Cafes across Europe, Asia, and the Americas, as well as owns, licenses and/or manages hotel/casino properties worldwide. Destinations include the company’s two most successful Hotel and Casino properties in Florida, both owned and operated by HRI parent entity The Seminole Tribe of Florida. In 2018, Hard Rock International was recognized as a Forbes Magazine Top Employer for Women and Land Operator of the Year at the Global Gaming Awards. For more information on Hard Rock International visit . Responsibilities Even though kitchen employees may not come into direct contact with guests, their responsibilities are key to the Cafe’s success. At Hard Rock, cooks will be considered all-around culinary employees. • Making prep recipes and menu products to spec, • Properly labeling, dating, covering and refrigerating prepped items for the line, • Performing opening, closing & side duties – setting up, stocking, and breaking down all kitchen equipment and prep, and line stations, • Maintaining a clean and organized kitchen, and line, • Practicing safety and sanitation standards, • Having a sense of urgency, • Properly reading items printed on order tickets or automated Kitchen Display System, • Assembling orders - double checking product quality and specs, • Demonstrating impeccable product knowledge, • Involved in handling all re-cook, special prep, long ticket, large party/voucher group procedures, • Communicating professionally with co-workers and Front-of-the-House staff This job description reflects the position’s essential functions; it does not encompass all of the tasks that may be assigned. Qualifications EXPERIENCE, EDUCATION, & CERTIFICATIONS • Minimum 1-2 years of experience (experience requirements may vary by location), • High School diploma or GED equivalent, • Remaining calm in a hectic, fast-paced atmosphere, • Demonstrating a high level of organization, attention-to-detail and a sense-of-urgency, • Displaying a positive and outwardly friendly attitude toward guests and co-workers, • Maintaining HRC’s 5 core Values and Mission Statement PHYSICAL DEMANDS • Ability to move throughout the Corporate office and Cafes during visits (standing, walking, kneeling, bending, etc.) for extended periods of time, • Ability to make repeating movements of the arms, hands, and wrists, • Ability to express or exchange ideas verbally and perceive sound by ear, • Manual dexterity, hand-eye coordination, and ability to work with hand above shoulders, • Ability to occasionally, regularly, frequently move objects (lift, push, pull, balance, carry) up to 10 pounds, • Ability to turn or twist body parts in a circular motion, • Ability to tolerate exposure to heat, cold, chemicals, and loud/noisy environment ADDITIONAL REQUIREMENTS • Must be at least 19 years old, • Maintaining a well-groomed appearance (“having a plan”), • Following all uniform guidelines, • Practicing all general safety & sanitation standards, • Recycling products, where possible

Job Description Overview NYY Steakhouse is part of the Hard Rock International brand. With venues in 74 countries, including 183 cafes, 27 hotels and 12 casinos, Hard Rock International (HRI) is one of the most globally recognized companies. Beginning with an Eric Clapton guitar, Hard Rock owns the world's most valuable collection of music memorabilia, which is displayed at its locations around the globe. Hard Rock is also known for its collectible fashion and music-related merchandise and Hard Rock Live performance venues. HRI owns the global trademark for all Hard Rock brands. The company owns, operates and franchises Cafes across Europe, Asia, and the Americas, as well as owns, licenses and/or manages hotel/casino properties worldwide. Destinations include the company’s two most successful Hotel and Casino properties in Florida, both owned and operated by HRI parent entity The Seminole Tribe of Florida. In 2018, Hard Rock International was recognized as a Forbes Magazine Top Employer for Women and Land Operator of the Year at the Global Gaming Awards. For more information on Hard Rock International visit . Responsibilities Even though kitchen employees may not come into direct contact with guests, their responsibilities are key to the Cafe’s success. At Hard Rock, cooks will be considered all-around culinary employees. • Making prep recipes and menu products to spec, • Properly labeling, dating, covering and refrigerating prepped items for the line, • Performing opening, closing & side duties – setting up, stocking, and breaking down all kitchen equipment and prep, and line stations, • Maintaining a clean and organized kitchen, and line, • Practicing safety and sanitation standards, • Having a sense of urgency, • Properly reading items printed on order tickets or automated Kitchen Display System, • Assembling orders - double checking product quality and specs, • Demonstrating impeccable product knowledge, • Involved in handling all re-cook, special prep, long ticket, large party/voucher group procedures, • Communicating professionally with co-workers and Front-of-the-House staff This job description reflects the position’s essential functions; it does not encompass all of the tasks that may be assigned. Qualifications EXPERIENCE, EDUCATION, & CERTIFICATIONS • Minimum 1-2 years of experience (experience requirements may vary by location), • High School diploma or GED equivalent, • Remaining calm in a hectic, fast-paced atmosphere, • Demonstrating a high level of organization, attention-to-detail and a sense-of-urgency, • Displaying a positive and outwardly friendly attitude toward guests and co-workers, • Maintaining HRC’s 5 core Values and Mission Statement PHYSICAL DEMANDS • Ability to move throughout the Corporate office and Cafes during visits (standing, walking, kneeling, bending, etc.) for extended periods of time, • Ability to make repeating movements of the arms, hands, and wrists, • Ability to express or exchange ideas verbally and perceive sound by ear, • Manual dexterity, hand-eye coordination, and ability to work with hand above shoulders, • Ability to occasionally, regularly, frequently move objects (lift, push, pull, balance, carry) up to 10 pounds, • Ability to turn or twist body parts in a circular motion, • Ability to tolerate exposure to heat, cold, chemicals, and loud/noisy environment ADDITIONAL REQUIREMENTS • Must be at least 19 years old, • Maintaining a well-groomed appearance (“having a plan”), • Following all uniform guidelines, • Practicing all general safety & sanitation standards, • Recycling products, where possible

Job Description NPC Global is a distribution company in Carteret, NJ looking to add a Forklift Operator to our expanding team! Job Responsibilities Responsibilities Include (but not limited to): • Unload materials and merchandise from incoming vehicles and stack them to assigned places, • Locate and move stock of products to pallets or crates for storage or shipment, • Identify damages and report shortages or quality deficiencies, • Transport raw materials to production workstations, • Inspect machinery to determine the need for repairs and guarantee safety by performing regular maintenance, • Keep updated records of inventory and activity logs, • Comply with company policies and legal guidelines, • 5 years’ experience in both, Distribution and Warehouse, • Proven experience as a forklift operator, • Proven experience as a reach truck forklift operator, • Attention to detail and familiarity with industrial equipment, • Excellent physical condition and coordination, • Full-Time Position, • Insurance, • Life Insurance, • 401K, • PTO, • Paid Holidays

Job Description Express Employment Professionals is hiring for a reputable sheet metal company in Brooklyn, NY. We are seeking a skilled Senior Forklift Operator (Sit Down or Stand Up) to ensure the safe and efficient movement of materials within our facility. If you are an experienced forklift operator with a strong commitment to safety and efficiency, we want to hear from you! Key Responsibilities: • Operate sit-down or stand up forklifts to move, stack, and load sheet metal products and materials within the warehouse., • Perform routine inspections of forklifts and equipment to ensure safe operation., • Assist in inventory management by accurately tracking and recording the movement of goods., • Collaborate with warehouse staff to fulfill orders and maintain optimal workflow., • Follow safety protocols and company policies to prevent accidents and injuries., • Conduct regular inventory checks and assist with cycle counting as needed., • Train and mentor junior forklift operators, promoting best practices in forklift operation., • Minimum of 2 years of experience operating sit-down forklifts in a warehouse or manufacturing environment., • Wide load experience preferred., • Valid forklift operator certification (must be current and valid)., • Strong understanding of warehouse safety practices and procedures., • Ability to lift heavy items and perform physical tasks as required., • Excellent communication and teamwork skills., • Attention to detail and commitment to safety and quality., • High school diploma or equivalent preferred.

Job Description Maximum Quality Foods, Inc. Job Description Job Title: Forklift Operator FLSA/Grade: Non-Exempt/Hourly Reports to: Warehouse Supervisor Department: Operations Position Summary: The Forklift Operator is responsible for maintaining all stock inventory and pulling orders for manufacturing per designated work orders by performing the following duties. The position of Forklift Operator is not exempt from the overtime provisions of the Federal Fair Labor Standards Act and shall be entitled to overtime compensation for hours worked more than 40 in any one work week. The Forklift Operator shall be accountable and supervised by the Warehouse Manager. Essential Duties & Responsibilities: Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Oversees and maintains all stock inventories for warehouse daily., • Follows daily manufacturing work orders giving special attention to various materials., • Maneuvers heavy materials with the use of forklift, pallet and hand truck as required., • Unloads shipping trucks as required., • Maintains and ensures all machines are functioning per established work standards., • Assists shipping area with package procedures as requested., • Reports any concerns or discrepancies to management., • Maintains tools and equipment in a clean, orderly and safe manner., • Complies with company policies and procedures giving special attention to safety regulations., • Oral Communication Skills, • Written Communication Skills, • Reading Skills, • Dexterity Skills, • Math Skills, • Professionalism, • RF/WMS experience preferred.

Job DescriptionDescription: For more than 75 years, Heatherwood has been committed to building upscale residential rental communities, commercial properties, and luxury urban spaces. Our commitment to quality constructions, striking designs, and providing exemplary service, makes us one of the most highly regarded leaders in the industry. Additionally, we offer a competitive benefits package including health & dental, and vision insurance, 401(k), and paid PTO. Heatherwood is on a mission to create high-quality places that inspire a genuine sense of community. As a Maintenance Supervisor for Heatherwood, you are the driving force in providing great service to our residents in a fast-paced, challenging, and rewarding environment. Responsibilities and Duties • Apply a “Safety First” approach to every day at Heatherwood., • Maintain the properties’ interior and exterior standards., • Openness and approachability to feedback and consistent communication with your team and management., • Advanced understanding and experience with the following mechanical systems, but not limited to: several types of HVAC equipment, plumbing (boilers, water heaters, drain clearing, fixture replacement), electrical repair and troubleshooting, appliance repair, painting, and carpentry., • Ability to use multiple building and property management applications and software including or similar functionality to; Yardi, Suite Spot, InCheck Microsoft Outlook, Word, and Excel., • Ability to assume the responsibilities of the Maintenance Manager in their absence., • Train and develop Maintenance Technicians on both technical and administrative skill sets to support growth., • Ensure Heatherwood’s standards and core values are consistently met., • Ability to effectively troubleshoot and problem-solve maintenance issues in a fast-paced setting., • Supporting the performance management of all maintenance associates., • Shared responsibility of “On-Call” schedule with your property and other Heatherwood properties., • Ability to learn or oversee a Sewer Treatment Plant and Swimming Pools where applicable., • A positive attitude., • Team first approach to every day., • A history of being a proven peer leader., • A minimum experience of 3+ years in a supervisory role in multifamily residential, commercial, or hotel maintenance, or similar field experience., • A proven track record of managing maintenance associates., • Operate with professionalism and integrity., • A customer-first approach to providing world class maintenance and service., • Ability to work directly with the Maintenance Manager to drive effective day-to-day operations of the maintenance operations at the community., • Strong time management routines and timely task execution of workload., • Vendor management experience includes communicating schedules, providing materials, project execution, and vendor accountability., • Advanced understanding of computer and smartphone skills., • Experience in managing a work order system, purchasing, and understanding a budget., • Balance between field and administrative workload., • Safe understanding of hand/power tools/mechanical systems and use of PPE (Personal Protective Equipment)., • Attention to detail and consistently doing the job right the first time., • Universal HVAC Refrigerant Certificate and CPO Certificate., • Heatherwood Safety Culture – monthly team safety training., • How your success in maintenance contributes to the communities’ goals., • How to effectively manage your time and communicate in a fast-paced setting., • Support in obtaining CPO (Certified Pool Operator) certificate if required., • HVAC training and support in obtaining HVAC Universal License., • Attention to detail and supporting Heatherwood’s maintenance standards., • Ongoing maintenance training and development and internal company growth opportunities.

Job Description About the Role: This is a seasonal position. The Pool Operations Technician plays a crucial role in ensuring the safety, cleanliness, and overall functionality of swimming pools and aquatic facilities. This position involves regular monitoring and maintenance of pool water quality, equipment, and surrounding areas to provide a safe and enjoyable environment for all users. The technician will be responsible for troubleshooting and repairing pool systems, including filtration and heating equipment, to ensure optimal performance. Additionally, the role requires adherence to health and safety regulations, as well as effective communication with facility management and patrons. Ultimately, the Pool Operations Technician contributes to a positive recreational experience by maintaining high standards of pool operation and safety. Minimum Qualifications: • High school diploma or equivalent., • Certification in pool operation and maintenance (e.g., Certified Pool Operator)., • Basic knowledge of pool chemistry and water treatment processes., • Experience as a service technician in the pool maintenance industry is preferred., • Strong Mechanical Background, • Driver's License, • Conduct regular water quality tests and adjust chemical levels as necessary to maintain safe swimming conditions., • Perform routine maintenance and repairs on pool equipment, including pumps, filters, and heaters., • Ensure cleanliness of pool decks, changing areas, and surrounding facilities by performing daily cleaning tasks., • Monitor pool usage and enforce safety rules and regulations to ensure the well-being of all patrons. The required skills for this position include a strong understanding of pool chemistry, which is essential for maintaining safe water conditions. Technical skills are utilized daily to troubleshoot and repair various pool systems, ensuring they operate efficiently. Attention to detail is critical when conducting water tests and performing maintenance tasks, as even minor discrepancies can affect safety. Communication skills are important for interacting with patrons and addressing their concerns effectively. Preferred skills, such as first aid knowledge, enhance the technician's ability to respond to emergencies, further ensuring a safe environment for all users.

Job Description General Description: Contact point for all shift team members with effective communication skills. Ability, to motivate, be proactive and ensure smooth operations with collaboration in effort to meet the department goals and objectives. Think logically and display technical aptitude to solve problems with creativity, diligence, and achievement. Produce machined parts by programming, setting up and operating a computer numerical control (CNC) machine. Maintaining equipment, adhering to quality and safety standards, saving, and updating parts programing, are some of the core responsibilities of a CNC operator. Reports to: Department Manager Responsibilities: • Programming, program selection, & program editing on CNC multi-axis turning centers., • Interpret engineering drawings to manufacture parts using CNC machinery, • Ability to make correct tool selection for parts manufacture, • Demonstrate ability to process work orders independently or with minimal instructions., • Perform preventative maintenance on machinery and equipment, • Identify quality, process, machinery, or equipment defects, • Delegate Operator tasks, set clear team performance expectations., • Oversee day-to-day shift operation, promoting a Safe work environment., • Improve the quality output of parts and work hands on with the quality department, • Implement continual training for teammates., • Troubleshoot equipment when there is a problem., • Other duties as assigned Minimum Educational Qualifications (If Applicable): • 7+ years working in a manufacturing environment/machine shop, • Proficiency with heavy machinery including lathe, drill press, grinding wheel, chop saw, and mill., • Ability to sequence or edit programs on lathe and CNC. • Read measuring tape, gauges, and calipers • Must be able to lift and move up to 40 lbs. Minimum Additional Training (If Applicable): • Company’s Quality Management System., • ISO 9001:2015 awareness., • Other Skills:, • Hand-eye coordination., • Attention to detail.

Job DescriptionAbout Crossmint Stablecoins and blockchains are upgrading the world’s financial system — and Crossmint lets companies harness their power with ease. Crossmint is a one-stop-shop developer platform for building modern financial applications, from the next generation of fintechs to applications that leverage AI agent–driven commerce. With just a few lines of code, developers can integrate programmable wallets, stablecoin payments, tokenization, on/off ramps, compliance, and agentic commerce tools — all from a single vendor, without the need for a large team of blockchain engineers. From companies like MoneyGram and Visa to entire nation states, our more than 40,000 clients use Crossmint to launch new financial products, tokenize assets, and build applications for agentic commerce — all on fully managed infrastructure across 50+ chains. If you want to help build the backbone of programmable finance and agentic systems, we’d love to work with you! Location New York City. Office located in SoHo. Type of Employment Full-time. Hybrid setting. About the Role We’re looking for a strategic operator to define how Crossmint grows: What we build, how we package it, and how we capture value. This is a cross-functional leadership role that blends product intuition, business acumen, and analytical depth. You’ll own pricing and monetization across our suite, partner with product and GTM teams to inform roadmap direction, and bring clarity to complex questions about what drives usage, revenue, and retention. You’ll help shape our operating model, how we build, and how we scale intelligently. If you think in systems, obsess over clarity, and want to architect the business behind the product, this is your role. What You Will Do • Product Strategy: Help define what we build, for whom, and why. Partner with product, sales, and marketing to set roadmap priorities., • Pricing & Packaging: Own pricing strategy, monetization models, and product-tier design across the platform., • Revenue Intelligence: Model usage, forecast revenue, and drive insights that guide growth and investment., • Strategic Projects: Spin up and drive execution on initiatives that sit between product, ops, and GTM—like regulatory strategy, partner identification & enablement, and more., • You bring 7+ years of experience in management consulting, product strategy, bizops, pricing, or GTM at a high-growth startup., • You’ve worked in crypto, fintech, or dev tools, and know what it takes to move from early adopters to scaled adoption., • You have a sharp business and analytical mind, with the ability to move between revenue models, roadmap tradeoffs, and customer feedback., • You understand how to build pricing and packaging from first principles, and not simply inherit what came before. As Head of Product Strategy, you’ll help define how that value gets packaged, priced, and scaled. You’ll be joining at a moment when our products are gaining traction across multiple verticals, and we need a clear strategic lens to guide what’s next. You’ll work directly with founders and senior leaders to shape roadmap priorities, own monetization strategy, and bring structure to high-impact, cross-functional questions. If you’ve been looking for a role where you can combine product instincts with business depth, and leave your fingerprints on a fast-moving, high-conviction company, this is it. Compensation & Benefits • We’re offering competitive and generous compensation, with meaningful equity and upside., • Unlimited, flexible PTO., • Flexible work schedule., • Company laptop and allowance for any necessary home equipment., • Daily stipend for commuting to the office and/or meals., • Three company-paid off-sites per year., • Health, dental, vision, life, short-term disability (STD), and long-term disability (LTD) insurances., • 401(k) Plan.Our Principles, • Results and delivery: Ship high quality work fast., • Build for the long term: Build scalable, secure, and reliable solutions. Use AI., • Extreme Ownership: Be an effective Directly Responsible Individual (DRI). Be proactive. We work to foster a respectful environment where each person can be their authentic self, free from harassment, racism, and any form of discrimination. We proudly uphold our commitment to diversity and inclusion as an equal opportunity employer, and this policy applies to all employment practices within our organization. Please note that Crossmint never conducts AI-based interviews, and all of our processes include an initial video call with a team member. Crossmint will not request your personal identification documents or any payment at any point during your interview process. Please stay vigilant about potential fraud. If you receive an email that claims to be from Crossmint but ends with any domain other than @crossmint.com, @crossmint.io or @paella.dev, it is not from us. We own these three domains listed before, and they are the only legitimate ones. Please let our Talent Team know if you need any assistance completing any forms, or participating in the process. Follow us on Linkedin and Twitter to keep updated with our latest activity! ????

Job DescriptionAbout Crossmint Stablecoins and blockchains are upgrading the world’s financial system — and Crossmint lets companies harness their power with ease. Crossmint is a one-stop-shop developer platform for building modern financial applications, from the next generation of fintechs to applications that leverage AI agent–driven commerce. With just a few lines of code, developers can integrate programmable wallets, stablecoin payments, tokenization, on/off ramps, compliance, and agentic commerce tools — all from a single vendor, without the need for a large team of blockchain engineers. From companies like MoneyGram and Visa to entire nation states, our more than 40,000 clients use Crossmint to launch new financial products, tokenize assets, and build applications for agentic commerce — all on fully managed infrastructure across 50+ chains. If you want to help build the backbone of programmable finance and agentic systems, we’d love to work with you! Location New York City. Office located in SoHo. Type of Employment Full-time. Hybrid setting. About the Role We’re looking for a high-context operator to own and scale everything that happens after the deal is signed. This is a customer-facing, technically-involved role at the core of how we deliver value. You’ll lead our post-sales function: Building the infrastructure, team, and strategy to ensure customers are onboarded successfully, technically enabled, and growing with us long-term. From enterprise support to CSE playbooks, you’ll help us move from high-potential partnerships to high-performing deployments. This is about building trust, driving outcomes, and turning complex blockchain integrations into seamless experiences. What You Will Do • Own the Customer Lifecycle: From onboarding to renewal, manage the full customer journey and post-sales operations., • Build & Scale the CSE Function: Lead and grow a team of Customer Success Engineers, Technical Account Managers, and Support Specialists., • Drive Retention and Expansion: Design success plans and engagement models that drive outcomes and NRR., • Customer Enablement: Build playbooks, training programs, and resources to help customers succeed independently., • You have 7+ years of experience in customer success, solutions engineering, or technical account management., • You've worked in crypto, and understand how technical complexity can become a barrier, or a wedge., • You've built or scaled post-sales or customer success teams at a high-growth startup., • You’re confident speaking to technical stakeholders, and know how to manage both urgency and long-term trust. As Head of Post-Sales & Customer Success, you’ll inherit a high-trust environment with major logos already in motion, and the opportunity to build the post-sales engine that drives long-term growth. You’ll be shaping how we deliver at enterprise scale while keeping our startup velocity intact. You’ll work closely with product, engineering, and GTM to unblock technical integrations, launch mission-critical projects, and ensure customers stay deeply engaged. If you’ve been looking for a chance to lead where success is measured by real usage and retention, not slide decks, this is for you. Compensation & Benefits • We’re offering competitive and generous compensation, with meaningful equity and upside., • Unlimited, flexible PTO., • Flexible work schedule., • Company laptop and allowance for any necessary home equipment., • Daily stipend for commuting to the office and/or meals., • Three company-paid off-sites per year., • Health, dental, vision, life, short-term disability (STD), and long-term disability (LTD) insurances., • 401(k) Plan.Our Principles, • Results and delivery: Ship high quality work fast., • Build for the long term: Build scalable, secure, and reliable solutions. Use AI., • Extreme Ownership: Be an effective Directly Responsible Individual (DRI). Be proactive. We work to foster a respectful environment where each person can be their authentic self, free from harassment, racism, and any form of discrimination. We proudly uphold our commitment to diversity and inclusion as an equal opportunity employer, and this policy applies to all employment practices within our organization. Please note that Crossmint never conducts AI-based interviews, and all of our processes include an initial video call with a team member. Crossmint will not request your personal identification documents or any payment at any point during your interview process. Please stay vigilant about potential fraud. If you receive an email that claims to be from Crossmint but ends with any domain other than @crossmint.com, @crossmint.io or @paella.dev, it is not from us. We own these three domains listed before, and they are the only legitimate ones. Please let our Talent Team know if you need any assistance completing any forms, or participating in the process. Follow us on Linkedin and Twitter to keep updated with our latest activity! ????

Job Description Fairstead is a purpose-driven real estate firm dedicated to building sustainable communities across the country. Headquartered in New York, with offices in Colorado, Florida, and Washington DC, Fairstead owns a portfolio of more than 25,000 apartments across 28 states that includes 25,000 units under management. Fairstead's commitment to communities is realized through a comprehensive platform that leverages in-house expertise in acquisitions, development, design and construction, asset management, and property management. Fairstead's primary mission is to provide high quality housing to all regardless of income, and to make our stakeholders feel "Right at Home." We accomplish this through an empathetic and innovative approach, and by utilizing our interdisciplinary platform as an investor, developer, owner, and operator. Fairstead's Core Values: Innovation, Determination, Integrity, Humility, Empathy and Partnerships Affordable internet access is a right: It is a necessary utility in our communities, just like water or heat. You need it for work, school, checking the latest weather report, streaming your favorite shows, and staying connected to loved ones. ResiBridge delivers reliable, fast, and affordable high-speed broadband options that meet your budget. ResiBridge is an independent Internet Service Provider of low-cost connectivity options that make sure you can stay connected at an affordable price. It's easy: We deliver a router to your home, with free installation, to get you connected. ResiBridge is currently serving Covington Kentucky and the New York City metro area including Newark, New Jersey with other cities following shortly. ResiBridge designs, builds, and operates a hybrid network of fiber optic and high-capacity wireless links for multi-dwelling units (MDUs). We are pushing the limits of available technology and over-delivering lightning-fast bandwidth using equipment only previously seen on commercial buildings. ResiBridge prides itself in delivering a superior customer experience, from sign-up, to installation, to industry-leading customer care. ResiBridge is seeking a highly skilled and motivated Wireless Network Field Engineer to join our dynamic and fast-paced team. This role is pivotal in maintaining network reliability, troubleshooting issues, and ensuring optimal performance across our infrastructure. The successful candidate will combine technical expertise in networking with a proactive approach to field-based maintenance and support within New York City and its boroughs. The ideal candidate will possess a strong understanding of network protocols, advanced wireless technologies, and field operations, demonstrate a proven ability to resolve complex technical challenges, and thrive under pressure in both collaborative and independent settings. This position requires approximately 20% travel and may involve off-hours deployments. Responsibilities: • Proactively monitor and ensure network stability utilizing advanced tools such as Grafana, Prometheus, and Wireshark., • Diagnose and resolve network issues related to routers, switches, and high-capacity wireless bridge systems., • Execute Linux system administration tasks and manage Docker container environments., • Develop and maintain comprehensive documentation for network configurations, processes, and incident responses., • Streamline operations through the development of automation scripts using Python and Bash., • Conduct on-site technical interventions, including:, • Installing, upgrading, and patching network infrastructure, including OLTs, ONTs, and high-capacity wireless bridges., • Setting up and configuring wireless systems, including 5GHz, 24GHz, 60GHz, and 70/80GHz mmWave technologies., • Performing structured cabling installations and testing at data centers and customer locations., • Managing hardware installations, replacements, and configurations for critical network infrastructure., • Collaborating with vendors for on-site technical support., • Optimize wireless links by analyzing and configuring radio parameters, including channel capacity, frequency coordination, and beam alignment., • Bachelor's degree in a related field or equivalent professional experience., • Minimum of 3 years of experience in network operations, wireless bridge systems, or related roles., • Proficiency in network telemetry tools (Grafana, Prometheus, rsyslog, NetBox)., • Advanced knowledge of networking protocols (TCP/IP, HTTP, DNS, DHCP, SNMP, BGP) and routing/switching concepts., • Expertise in wireless technologies, including 5GHz, 24GHz, 60GHz, and 70/80GHz mmWave, with a solid understanding of link optimization techniques., • Hands-on experience with Linux system administration and containerization technologies (Docker)., • Strong scripting skills with Python and Bash for automation., • Familiarity with cloud platforms such as AWS., • Knowledge of network security best practices., • Demonstrated ability to manage multiple tasks effectively and solve complex problems collaboratively and independently., • Excellent written and verbal communication skills with a detail-oriented approach to documentation., • Physically capable of lifting and transporting equipment weighing up to 50 lbs., • This position operates in a 24/7 NOC environment. Candidates must be willing to work flexible hours, including nights, weekends, and holidays as required., • This role may require occasional travel to data centers or client sites. Exact compensation may vary based on skills, experience, and location. Salary Range$85,000—$100,000 USD Diversity in backgrounds and experiences is key to Fairstead's success. Being an equal opportunity employer is a central tenet of our philosophy that shapes who we are and the communities we serve. Our goal is to ensure competitive total compensation that is commensurate with experience, location, and other market benchmarks. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at

Job Description Job Responsibilities: • Perform routine and documented Quality Control checks on raw materials, in-process materials and finished products according to required specifications and written Standard Operating Procedures., • Provide product quality feedback to Production Supervisor and/or Lead Operator during production run. Must report and communicate any QC issues to QC/Lab Manager, Shift Supervisor and line operator during a production run and trouble shoot collectively., • Provide clear instruction when product quality is not within required specifications and implement QC hold procedures and undertake corrective actions as required. Must report any QC hold material to QC/Lab Manager and Shift Supervisor., • Organize and upload QC Test Inspection forms on Google-drive in accordance to production schedule. Enter QC data on timely basis and audit process data during production run., • Audit raw materials used, in process materials, finished good roll weights and product labelling during a production run., • Audit QC Report for completed production runs and ensure all testing are completed. Issue Manufacturer Certificate of Analysis and Certificate of Compliance as required., • Maintain proper use of lab equipment and perform equipment calibration as required., • Assist in maintaining compliance to ISO900I quality management system standards. This includes maintaining and overseeing the document control system, ensuring all quality and ISO9001 documents are accurate, up to date, and compliant., • Manage full document lifecycle which includes creation, review, revision, distribution and archival., • Train team members and end-users on document control procedures and electronic document management systems., • Assist with internal and external audits., • Must act as a back up to the other QA / Lab Technicians which includes working on different shifts as required., • Perform all duties safely and keep lab area clean and organized., • Perform other duties assigned by the QC/Lab Manager. Skills & Knowledge Required • Good time management skills, • Good organization skills and attention to detail, • Problem analysis and problem-solving skills, • Team work, • Professional integrity, • Ability to work independently Qualifications • Experience in document control or quality assurance., • Working knowledge of compliance standards (e.g., ISO 9001)., • Proficiency in Microsoft Office and electronic document management systems (EDMS)., • High school diploma or GED certificate, • Associate degree or QC experience preferred, • Experience in a manufacturing environment a plus, • Communication and computer skills

Job Description MG+M The Law Firm (MG+M) has an immediate opening for a Trial Graphics & Logistics Analyst to sit in any of our 16 offices. The Trial Graphics & Logistics Analyst will assist the firm’s national trial team with producing trial and deposition presentations, as well as other trial related media and logistical needs. MG+M is a nationally renowned litigation law firm concentrating on complex civil matters. The firm's expertise is diverse but focused in the areas of toxic tort, complex product liability, local government, general liability, and commercial litigation. We approach litigation as a unified team, integrating our efforts with those of our clients to advance their interests wherever they do business. Our goal is always to deliver optimal results at the best possible value. Essential Duties & Responsibilities: • Design presentation templates, create/maintain slide decks of commonly used slides and produce new slides for use at trial or in depositions, • Assist with editing/formatting various media for use as evidence during trial, • Conceptualize, design, and oversee the completion of high-level graphics, illustrations, and animations, • Provide trial tech support as the “hot seat operator” during trial, • Collaborate closely with trial teams to provide recommendations for case themes, • Create, revise, and reformat PowerPoint presentations at an expert level, • Lead discussions and coordinate with trial teams and plaintiffs on courtroom setup and requirements, • Manage video editing during trial, • Create and oversee the production of graphics, animations, videos, and other demonstrative evidence for use in trial, • Conduct ongoing research into new hardware and software technologies that can benefit trial teams, • Deliver exceptional customer service to all team members during trial, • Lead negotiations with third-party vendors regarding costs and timing for various services at trial, including hotel accommodations, conference room arrangements, and printing services, • Manage on-site services such as internet connectivity and handle all related invoicing, • Assist paralegals with document production, • Provide support to attorneys and legal staff with media and document production, • Respond to requests for trial technology and coordinate pre-trial and in-trial after hours support collaboration, • Provide all levels of technology litigation support based on priority and urgency, • Work directly with the trial graphics/logistics team regarding equipment requirements and IT resources (internal and external) to ensure pre-trial testing and trial production processes are available throughout the lifecycle of the trial. Specific responsibilities include but are not limited to:, • Provide comprehensive pre-trial and onsite litigation technology support for all trial graphic/logistics including: resource oversight and coordination with MG+M litigation teams and vendors as deemed appropriate, • Participate in internal team meetings regarding the litigation lifecycle (identification, preservation, collection, processing, analysis, review, production, and presentation of ESI and paper documents), • Responsible for the production of pre-trial and in-trial support process documentation and workflows (e.g., litigation intake forms, check lists etc.); implement best practices related to litigation practice technology, document management and litigation workflow, • Monitor litigation practice support technology trends and make recommendations to improve litigation support services, • Assist with additional trial related needs and special projects as required Candidate Qualifications: • Experience in a courtroom during trial and knowledge of preparing a courtroom with technology, • Experience in a role that involved producing presentations for a law firm or other professional services organization, • Experience in a role providing technology litigation support services is a plus, • Expert proficiency in Microsoft PowerPoint is required, • The ideal candidate will also have a high level of competency in the following:, • Microsoft Excel, Adobe Creative Suite (particularly infographic production), • PDF reading and editing software (Kofax and/or Adobe Acrobat), • Basic video editing capabilities and graphic design skills Personal Attributes: • This position involves significant contact with attorneys and staff and requires excellent interpersonal, verbal and written communication skills. Frequent travel is required to provide on-site support at trials nationwide, • Demonstrate willingness to be flexible with work schedule, • Ability to manage competing priorities and requirements from trial teams by creating effective workflow to ensure the litigation requirements are effectively met, • Anticipate and proactively problem-solve case team needs and effectively solve unexpected problems or issues that arise Why Should You Apply? MG+M offers competitive compensation and a comprehensive benefits package including medical, dental, vision, life, disability, and 401(k). MG+M will not discriminate in its employment practices due to an applicant’s age, race, color, religion, sex, sexual orientation, gender identity, national origin, and veteran or disability status. We are committed to cultivating an environment that embraces and promotes diversity as a fundamental value.

Job Description Reporting to the Show Director of Overland Expo, the sales director is responsible for leading the sales strategy and team, forecasting and managing all sales revenue streams across the brand’s consumer events and content properties. The role will focus on growing existing revenue channels and delivering new products to deliver topline portfolio growth. The sales director is a strong, strategic, and experienced leader, with a proven track record using Salesforce to manage sales teams and pacing, while also managing key customer accounts. Collaborating with the marketing team, the sales director oversees sales marketing and prospecting campaigns. Responsibilities • Hires and develops staff and sales contractors, managing performance to deliver profitable growth against revenue goals, • Hosts weekly sales meetings and 1:1 pipeline meetings with sellers, • Promotes a culture of success and collaboration, characterized by an emphasis on coaching, learning and development, • Defines and manages sales staff targets, territories, compensation and incentive programs that motivate desired behavior, • Manage all sales CRMs including but not limited to Salesforce, A2Z, Hubspot, holding sales team accountable for CRM adoption and utilization, • Defines the customer success and retention strategy paying attention to the customer experience and building strategies for sellers to close accounts, • Manages effective rebooking processes, rebook marketing and onsite sales strategies, • Contributes to the strategic brand operating plan and writes sales plans to achieve revenue goals, • Development + presentation of sales pacing & strategy for meetings with upper management, • Manage sales pricing strategy collaborating with show director and working with Pricing Director to create effective pricing strategies for media and events, • Provides detailed and accurate sales reforecasting, budgeting and actuals for month-end close., • Ensures product range, value proposition and performance align with exhibitor, sponsor and advertiser objectives, • Identifies opportunities to introduce new products and services to benefit customers and deliver incremental revenue, • Collaborate with marketing to oversee sales marketing and lead gen/prospecting strategies including email, SEO, social, etc, and to develop sales materials, sales packaging, and pitch decks., • Provides detailed and accurate sales budgeting and forecasting including proactive sharing of updates, risks and opportunities, • Manages key customer relationships and participates in closing key accounts, • Builds and maintains relationships with key personnel and partners in the industry., • Manage sales operations team on the build out of show floor plans, exhibitor move in strategy, client trouble shooting with billing, collections process, post event reporting and the development of sales correspondence templates., • Produce weekly sales revenue and pacing reports for management Requirements • 8+ years’ experience leading a sales team and managing a revenue business of $10M+, • Proven B2C digital media sales and strategy experience; events experience is a plus, • Proven experience using Salesforce to manage a sales team and sales pacing., • Takes a data-driven approach to problem solving, • An ability to engage effectively with the senior leadership team, customers and internal team, • Expert at problem solving especially under time constraints and in challenging situations, • A strategic leader with a collaborative mindset, • Strong interpersonal skills and ability to cultivate an atmosphere of collaboration, integrity, trust, diversity, and respect, • Strong conflict management skills in dealing with complex sales related issues and personnel management, • Ability to work in a self-directed manner; strong ability to motivate, influence and lead a team, • Team player with a "no task is too small" attitude, • Energized by the opportunity to create lasting and impactful change to our sales planning approach PHYSICAL DEMANDS + ENVIRONMENTAL FACTORS • Workstation, mouse, keyboard, dual monitors, • Live video meetings, • Travel required to all Overland Expo events and other industry events as needed. ABOUT OVERLAND EXPO Founded in 2009, Overland Expo is the world's premier event series for do-it-yourself adventure travel enthusiasts and consumers. Hundreds of exhibitors of adventure travel equipment, camping gear, bikes, vehicles, and services convene at every Overland Expo event. Each Expo hosts hundreds of session hours of classes, including off-road driving techniques, adventure motorcycling, inspirational programs, roundtable discussions, demonstrations and the Overland Film Festival. Overland Expo is a consumer event series that rolls into Emerald’s outdoor portfolio. ABOUT EMERALD Emerald Holding, Inc. (NYSE: EEX) is the largest U.S.-based B2B event organizer, empowering businesses to succeed year-round by expanding meaningful connections, developing influential content, and delivering powerful commerce-driven solutions. As the owner and operator of a curated portfolio of B2B events spanning trade shows, conferences, B2C showcases and a scaled hosted buyer platform, Emerald delivers dynamic solutions across leading industries through its robust content and e-commerce marketplace. Emerald is a trusted partner for its thousands of customers, predominantly small and medium-sized businesses, playing a pivotal role in driving year-round commerce through streamlined buying, selling, and networking opportunities. Powered by an experienced team, Emerald is fostering meaningful engagement and delivering unparalleled market access with a commitment to driving business growth 365 days a year. Join Us at Emerald At Emerald, we are dedicated to building a workplace where everyone feels valued and included. We actively seek out diverse talent and fresh perspectives, embracing a wide range of professional backgrounds and experiences. Our skills-based hiring approach focuses on capabilities and potential. Over 90% of our roles don’t require a college degree, except for specialized fields like legal, finance, and accounting. Come grow with us! COMPENSATION & BENEFITS Target Compensation: $90,000-100,000 (sales incentive eligible) Please note that this range reflects a reasonable estimate of the target compensation for this position. This range may ultimately vary based on a candidate’s qualifications and may be higher where required by applicable law. We offer a competitive benefits package designed to strengthen our employees’ physical and mental health, including unlimited vacation for exempt employees, 401(k) plan with a company match, medical/dental/vision coverage, parental and caregiver leave, dependent, commuter and FSA benefits, professional development programs, and mental wellness tools such as weekly guided meditation programs. If you need accommodation in our application process or have questions about our posted salary range, please email our Talent Acquisition team at Careers@EmeraldX. com.

Job Description Job Title: Scrap Yard Crane Operator Location: Jersey City Job Type: Full-time Summary: We are seeking a skilled and safety-conscious Crane Operator to join our team at our recycling facility. The Crane Operator will be responsible for the safe and efficient movement and sorting of various types of scrap metal using a mobile crane (Excavator) . This role requires precision, attention to detail, and a strong commitment to safety regulations. Responsibilities: • Operate a mobile crane (excavator) equipped with a grapple, magnet, or other attachments to load, unload, sort, and move scrap metal materials., • Efficiently organize, stack and load scrap metal according to material type, size, and destination within the yard., • Inspect crane daily for any mechanical issues, safety hazards, or needed repairs; report any deficiencies immediately to supervision., • Perform routine maintenance checks on the crane and attachments as required., • Adhere strictly to all company safety policies, procedures, and OSHA regulations., • Communicate effectively with ground personnel, truck drivers, and other team members to ensure smooth operations., • Maintain a clean and organized work area around the crane., • Assist with other yard duties as needed, including general labor, equipment cleaning, or material handling., • Operate other heavy equipment as directed and qualified. Qualifications: • Previous experience as a crane operator, preferably in a scrap yard, demolition, or heavy industrial environment., • Strong understanding of crane operations, load limits, rigging techniques, and hand signals., • Ability to perform pre-operational checks and minor maintenance on equipment., • Strong commitment to safety and ability to follow strict safety protocols., • Ability to work in various weather conditions and a dusty, outdoor environment., • Must be able to pass a pre-employment drug screen and physical., • High school diploma or equivalent. Physical Requirements: • Ability to sit for extended periods of time while operating the crane., • Capable of climbing ladders and stairs to access the crane cab., • Good vision and hearing are essential for safe operation. Benefits: • Paid Parental Leave, • Health insurance, • Dental insurance, • Vision insurance, • HSA/ FSA, • Paid time off, • Employee Assistance Program, • 401k matching, • Tuition Reimbursement

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Senior Project Engineer – Performs & plans commissioning of electrical systems. Must be a self-motivated & energetic professional. Must have understanding of building electrical systems design & construction. Must have experience with commissioning process of electrical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of electrical systems and related controls. Candidate will be responsible for reviewing project information; coordinating and executing daily field activities; maintaining project documentation; assisting the Project Manager with schedule and planning of resources; and providing guidance to Project Engineers. May perform as team lead on small to medium sized projects. Will be expected to assess and test at a high technical level. This role requires the candidate to have technical competency, organizational skills, good communication skills, and to work well in a team environment where leadership is necessary. Primary Duties/Responsibilities: • Commission electrical distribution equipment and related controls, primarily in data center environments, including high voltage and medium voltage systems., • Review system designs for compliance with client facility goals., • Prepare plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment., • Perform analysis of test results using instrumentation and prepare reports., • Understand critical power quality requirements and test procedures., • Perform thermographic surveys and analyze results., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with the Project Manager and project teams to coordinate and execute field activities., • Prepare and provide input on commissioning project documentation and schedules., • Draft comprehensive test procedures for a variety of equipment and systems., • Attend relevant project coordination and schedule meetings as necessary., • May be required to lead commissioning meetings or speak on technical topics., • Assist with submitting and maintaining daily commissioning reports., • Train and guide both Associate Project Engineers and Project Engineers on roles & responsibilities., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with building equipment, including, but not limited to:, • Generator, • Generator Paralleling Switchgear, • High / Medium / Low Voltage Transformer (XFMR), • Uninterruptible Power Supply (UPS Systems), • Battery Systems, • High / Medium / Low Voltage Switchgear (SWGR), • Low Voltage Main Switchboards (MSB), • PLC Control, • Automatic and Semi-Automatic Switching Controls, • Electrical Power Monitoring System (EPMS), • Automatic Transfer Switch (ATS), • Static Transfer Switch (STS), • Power Distribution Unit (PDU), • Busways, • Remote Power Panel (RPP), • Grounding Systems, • Hybrid Work Environment., • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation.Qualifications Education/Experience/Background: • Minimum of 7 or more years of experience in commissioning with mission critical project experience, or relevant and applicable industry experience., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously, work with limited supervision and manage junior engineers on day-to-day tasks., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Knowledge & experience with InterNational Electrical Testing Association (NETA) test specifications., • Distributed control system experience a plus., • Good understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $120000 to $140000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description🚀 About PermitFlow PermitFlow is building AI agents for the $1.6T construction industry. We’re creating the leading pre-construction platform, starting with the $12B permitting market. Our platform automates the slow, manual permitting process for builders, handling everything from jurisdiction research to application preparation, submission, and real-time tracking. By turning fragmented regulations and workflows into structured, intelligent systems, we help contractors move faster, reduce risk, and scale with confidence. We've raised over $36.5M with Kleiner Perkins leading our Series A, with participation from Initialized Capital, Y Combinator, Felicis Ventures, and Altos Ventures. Our backers include founders and executives from OpenAI, Google, Procore, ServiceTitan, Zillow, PlanGrid, Uber, and more. We are a team of architects, engineers, permitting experts, and product builders who know the pain of pre-construction firsthand and are committed to solving it. Demand is growing faster than we can keep up, and we’re looking for top talent to help us scale. Our HQ is in New York City with a hybrid schedule (3 in-office days per week). We prefer NYC-based candidates or those open to relocation. ✋ Who you are? * Proven Account Manager: You have experience managing a portfolio of 5–6 figure B2B SaaS accounts, with a strong track record of renewals and upsells. * Revenue-Driven: You view customer management through the lens of growth — identifying expansion opportunities and working cross-functionally to drive account value. * Strategic Partner: You excel at understanding customer business needs and translating them into actionable account plans that generate mutual success. * Process-Oriented Operator: You thrive in an early-stage environment, helping to shape account management playbooks and contributing to scalable systems. * Analytical Communicator: You're confident using data to influence customer conversations, evaluate health signals, and identify churn or upsell risks early. ✅ What You’ll Do: As an early Account Manager at PermitFlow, you’ll be responsible for owning the commercial relationship with a portfolio of construction and real estate development clients — driving value, revenue, and retention. * Manage a book of business consisting of contractors and developers; build and deepen relationships with decision-makers and influencers. * Own the full account lifecycle — from implementation oversight to ongoing engagement, renewal, and expansion. * Develop strategic account plans that identify growth opportunities (e.g., new projects, regions, or service lines). * Lead renewal negotiations and coordinate expansion discussions in partnership with Sales and Customer Success leadership. * Collaborate closely with Permit Operations to ensure high-quality onboarding and ongoing service delivery. * Monitor account health and proactively mitigate churn risk through structured interventions. * Partner with Product and Ops to advocate for customer needs and influence our roadmap. * Help build our GTM foundation by contributing to processes, playbooks, and future hiring as the team scales. This is a foundational role — perfect for someone eager to take ownership, influence company direction, and be a driving force behind PermitFlow’s growth. 🙌 Qualifications & Fit: * 4+ years of experience in a B2B SaaS Account Management, Sales, or Customer Success role (startup experience preferred) * Proven track record of renewals, upsells, or account growth * Strong negotiation and presentation skills * Self-starter who thrives in ambiguous and evolving environments * Experience in construction, permitting, or real estate tech is a major plus 💙 Benefits: * 📈 Equity packages * 💰 Competitive Salary * 🩺 100% Paid health, dental & vision coverage * 💻 Company issued laptop. * 🎧 Home office & equipment stipend * 🍽️ Lunch & Dinner provided via UberEats w/ a fully stocked kitchen * 🚍 Commuter benefits * 🎤 Team building events * 🌴 Unlimited PTO ✏️ Interview Process * 20 minute initial assessment * 20 minute interview with recruiter * 30 minute hiring manager interview * 30 minute role playing interview with hiring manager * 30 minute interview with our CEO * Reference check * Offer! Compensation Range: $110K - $150K

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Watch Engineer is responsible for the safe and efficient operation of the Veolia Energy CoGen facility at Kings Plaza, Brooklyn, NY. This includes chilled water production, Deutz engines, electrical generating equipment, satellite facilities, and the utility distribution system. The Watch Engineer will support the Chief Engineer in daily operations and routine operating maintenance to ensure reliability, compliance, and optimal performance of all plant systems. Primary Duties/Responsibilities: • Operate, monitor, and maintain chilled water systems, Deutz engines, electrical generating equipment, utility distribution systems, pumps, cooling towers, and auxiliary equipment., • Participate in plant start-up, control, shutdown, and inspections., • Monitor instrumentation and the Distributed Control System (DCS) to ensure safe and efficient operations; identify causes of alarms or issues and take corrective action., • Perform routine inspections, log readings, and prepare operating reports., • Conduct preventive and routine maintenance, including valve adjustments, cylinder head replacements, spark plug changes, and cleaning of pumps and water conditioning equipment., • Troubleshoot operational issues and complete minor repairs as needed., • Perform regular inspection tours of the plant and distribution system, including electrical systems., • Ensure compliance with company policies, safety regulations, and environmental requirements., • Support energy efficiency, reliability, and continuous improvement initiatives., • Provide clear turnover reports and communication between shifts., • Any other operational or mechanical task assigned by management, chief or foreman., • Emergency response: Respond to plant emergencies, alarms, and abnormal conditions in accordance with established procedures., • Able to work in variable temperature/noise environments.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • 5 years of experience in operating stationary or marine boilers., • Proficient in Lock-out/Tag-out and Safety Tagging (STS) systems., • Working knowledge of computerized maintenance management systems (CMMS), such as Maximo, and building automation/distributed control systems., • Ability to troubleshoot both mechanical and electrical systems., • Capable of working all shifts, weekends, and holidays as required., • Must hold and maintain a valid Q-01 refrigeration license, S-95, S-12, S13 and A-35 certification and other additional COF’s required by Plant management., • The job can be physically demanding involving movement of heavy equipment and carrying materials up and down stairs., • Candidates should be able to lift a 50-lb load. Additional Information Pay Range: $59.00 to $62.36 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Senior Project Engineer – Performs & plans commissioning of mechanical systems. Must be a self-motivated & energetic professional. Must have understanding of building mechanical systems design, construction & operation. Must have experience with commissioning process of mechanical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of mechanical systems and related controls. Candidate will be responsible for reviewing project information; executing daily field activities; maintaining project documentation; assisting the Project Manager with schedule and planning of resources, and providing guidance to Project Engineers. May perform as team lead on small to medium sized projects. Will be expected to assess and test at a high technical level. This role requires the candidate to have technical competency, organizational skills, good communication skills, and to work well in a team environment where leadership is necessary. Primary Duties/Responsibilities: • Commission mechanical, plumbing & fire alarm and suppression equipment and related controls, primarily in data center environments., • Review system designs for compliance with client facility goals., • Prepare plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment., • Perform analysis of test results using instrumentation and prepare reports., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with the Project Manager and project teams to coordinate and execute field activities., • Prepare and provide input on commissioning project documentation and schedules., • Draft comprehensive test procedures for a variety of equipment and systems., • Attend relevant project coordination and schedule meetings as necessary., • May be required to lead commissioning meetings or speak on technical topics., • Assist with submitting and maintaining daily commissioning reports., • Train and guide both Associate Project Engineers and Project Engineers on roles & responsibilities., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with Mechanical, Plumbing & FLS building systems & equipment, including, but not limited to:, • Air Cooled Chiller, • Water Cooled Chiller, • Cooling Tower, • Direct Evaporative Cooling System, • Air Handling Unit, • Computer Room Air Conditioning Unit, • Process Water Plants, • Boilers, • Fuel Systems, • Backup generators, • Gas turbines, • Reciprocating engines, • Steam turbines, • Selective catalytic reduction systems, • Fan Coil Unit, • DX Split System, • Fan Array, • Chemical Injection System, • Variable Frequency Drive, • Variable Refrigerant Volume System, • Rooftop Unit, • Variable Air Volume Unit, • Makeup Air Unit, • Hydronic Pump, • Leak Detection, • Heat Trace, • DDC & PLC Controls, • Fire Pumps & Controller, • Pre‐Action Fire Suppression System, • Fire Alarm Control Panel, • VESDA System, • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation., • Hybrid Work Environment.Qualifications Education/Experience/Background: • Minimum of 7 or more years of experience in commissioning with mission critical project experience, or relevant and applicable mechanical and/or controls experience., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously, work with limited supervision and manage junior engineers on day-to-day tasks., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Distributed control system experience a plus., • Good understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Team player and a “client-first” mentality., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $120000 to $140000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Fairstead is a purpose-driven real estate firm dedicated to building sustainable communities across the country. Headquartered in New York, with offices in Colorado, Florida, and Washington DC, Fairstead owns a portfolio of more than 25,000 apartments across 28 states that includes 25,000 units under management. Fairstead's commitment to communities is realized through a comprehensive platform that leverages in-house expertise in acquisitions, development, design and construction, asset management, and property management. Fairstead's primary mission is to provide high quality housing to all regardless of income, and to make our stakeholders feel "Right at Home." We accomplish this through an empathetic and innovative approach, and by utilizing our interdisciplinary platform as an investor, developer, owner, and operator. Fairstead's Core Values: Innovation, Determination, Integrity, Humility, Empathy and Partnerships The Service Manager manages and supervises the repair and maintenance of property buildings. They ensure the timely installation of mechanical equipment and upkeep of Fairstead's property to ensure operational effectiveness. The Service Manager oversees operational efficiency of all electrical equipment and mechanical systems through inspection and repair and ensure that property's premises and facilities are kept clean and hygienic in alignment with Fairstead safety policies and standards. RESPONSIBILITIES: • Supervision of other maintenance employees., • Taking a leadership position on special projects., • Perform a variety of skilled maintenance and repair tasks., • Strong knowledge of accident and safety precautions., • Proficient in a specific trade with general maintenance and repair skills., • Work independently on routine projects and receive assistance for more complex projects., • Occasional need to work overtime for special projects or emergencies. BENEFITS: • Generous employer contribution for Medical and Dental through United Healthcare., • Employer Paid Vision Plans., • Company Matched 401(k) Retirement Plan: 100% of the first 3%; 50% of the next 2%., • 12+ paid Holidays., • 15 days of PTO., • 7 Sick days., • Employer Paid Life Insurance., • Flexible Spending Account., • Nationwide Pet Insurance., • Disability Insurance., • Laser Correction Discount., • Employee Discounts on appliances, apparel, and more. QUALIFICATIONS: • Three (3) years experience in property maintenance., • Proficient in a specific trade with general maintenance and repair skills., • Knowledge of tools, techniques, and terminology of building and mechanical trades., • Strong knowledge of accident and safety precautions., • Knowledge and experience using a variety of tools and equipment to complete tasks., • Great organization and project management skills., • Able to implement and improve policies and procedures., • Proficient in Microsoft Office Suite. Salary Range$24—$28 USD Diversity in backgrounds and experiences is key to Fairstead's success. Being an equal opportunity employer is a central tenet of our philosophy that shapes who we are and the communities we serve. Our goal is to ensure competitive total compensation that is commensurate with experience, location, and other market benchmarks. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at

Job DescriptionSalary: $30-35/hr Construction material wholesaler has the following opportunity for a team player with motivation to succeed to join our team in Jersey City, NJ. We are in search of an experienced Heavy Equipment Operator. • Must have a minimum of 2-3 years experience with excavators and wheel loaders., • Experience with crushing and/or screening equipment a plus. Must be ableto pass background, motor vehicle, and drug screens. OSHA 10-Hour or OSHA 30-hour Construction certification a plus. Medical, Dental, and vision insurance available. Retirement plan.

Job Description Job Position: Water Well Driller Location: Oahu and Kauai Pay: ($55,000 - $100,000 per year) based on experience Overview We are seeking a skilled and dedicated Drill Rig Operator to join our team in the water well industry located in Hawaii. The ideal candidate must have a strong mechanical background and experience with various drilling Methods (mud and air rotary) and experience with submersible pump installation. As a Driller, you will play a crucial role in the maintenance and operation of drilling equipment and ensure the safe and efficient execution of drilling projects. CDL is required. Forklift certification required. Duties Operate drilling rigs and associated equipment, ensuring compliance with safety regulations and OSHA standards. Perform routine maintenance on drilling equipment, including and support equipment. Maintain accurate records of drilling operations, including depth, and other relevant data. Apply housekeeping skills and have a positive work ethic to promote safety and efficiency. Please submit a resume. This is an opportunity to work throughout the state of Hawaii Job Type: Full-time Pay: negotiable based on experience 30 day evaluation period. Must have the ability to commute or relocate. Position available immediately. #hc195234

Job Description🚀 About PermitFlow PermitFlow is building AI agents for the $1.6T construction industry. We’re creating the leading pre-construction platform, starting with the $12B permitting market. Our platform automates the slow, manual permitting process for builders, handling everything from jurisdiction research to application preparation, submission, and real-time tracking. By turning fragmented regulations and workflows into structured, intelligent systems, we help contractors move faster, reduce risk, and scale with confidence. We've raised over $36.5M with Kleiner Perkins leading our Series A, with participation from Initialized Capital, Y Combinator, Felicis Ventures, and Altos Ventures. Our backers include founders and executives from OpenAI, Google, Procore, ServiceTitan, Zillow, PlanGrid, Uber, and more. We are a team of architects, engineers, permitting experts, and product builders who know the pain of pre-construction firsthand and are committed to solving it. Demand is growing faster than we can keep up, and we’re looking for top talent to help us scale. ✋ Who you are? * Proven Account Manager: You have experience managing a portfolio of 5–6 figure B2B SaaS accounts, with a strong track record of renewals and upsells. * Revenue-Driven: You view customer management through the lens of growth — identifying expansion opportunities and working cross-functionally to drive account value. * Strategic Partner: You excel at understanding customer business needs and translating them into actionable account plans that generate mutual success. * Process-Oriented Operator: You thrive in an early-stage environment, helping to shape account management playbooks and contributing to scalable systems. * Analytical Communicator: You're confident using data to influence customer conversations, evaluate health signals, and identify churn or upsell risks early. ✅ What You’ll Do: As an early Account Manager at PermitFlow, you’ll be responsible for owning the commercial relationship with a portfolio of construction and real estate development clients — driving value, revenue, and retention. * Manage a book of business consisting of contractors and developers; build and deepen relationships with decision-makers and influencers. * Own the full account lifecycle — from implementation oversight to ongoing engagement, renewal, and expansion. * Develop strategic account plans that identify growth opportunities (e.g., new projects, regions, or service lines). * Lead renewal negotiations and coordinate expansion discussions in partnership with Sales and Customer Success leadership. * Collaborate closely with Permit Operations to ensure high-quality onboarding and ongoing service delivery. * Monitor account health and proactively mitigate churn risk through structured interventions. * Partner with Product and Ops to advocate for customer needs and influence our roadmap. * Help build our GTM foundation by contributing to processes, playbooks, and future hiring as the team scales. This is a foundational role — perfect for someone eager to take ownership, influence company direction, and be a driving force behind PermitFlow’s growth. 🙌 Qualifications & Fit: * 4+ years of experience in a B2B SaaS Account Management, Sales, or Customer Success role (startup experience preferred) * Proven track record of renewals, upsells, or account growth * Strong negotiation and presentation skills * Self-starter who thrives in ambiguous and evolving environments * Experience in construction, permitting, or real estate tech is a major plus 💙 Benefits: * 📈 Equity packages * 💰 Competitive Salary * 🩺 100% Paid health, dental & vision coverage * 💻 Company issued laptop. * 🎧 Home office & equipment stipend * 🍽️ Lunch & Dinner provided via UberEats w/ a fully stocked kitchen * 🚍 Commuter benefits * 🎤 Team building events * 🌴 Unlimited PTO ✏️ Interview Process * 20 minute initial assessment * 20 minute interview with recruiter * 30 minute hiring manager interview * 30 minute role playing interview with hiring manager * 30 minute interview with our CEO * Reference check * Offer! Compensation Range: $110K - $150K

Job Description Fairstead is a purpose-driven real estate firm dedicated to building sustainable communities across the country. Headquartered in New York, with offices in Colorado, Florida, and Washington DC, Fairstead owns a portfolio of more than 25,000 apartments across 28 states that includes 25,000 units under management. Fairstead's commitment to communities is realized through a comprehensive platform that leverages in-house expertise in acquisitions, development, design and construction, asset management, and property management. Fairstead's primary mission is to provide high quality housing to all regardless of income, and to make our stakeholders feel "Right at Home." We accomplish this through an empathetic and innovative approach, and by utilizing our interdisciplinary platform as an investor, developer, owner, and operator. Fairstead's Core Values: Innovation, Determination, Integrity, Humility, Empathy and Partnerships ResiBridge is an independent Internet Service Provider of low-cost connectivity options that empower communities to stay connected. Our mission is simple: provide seamless internet access through professional-grade routers, free installation, and unparalleled service. Currently serving portions of Maryland, Ohio, Kentucky and the New York City metropolitan area including Newark, New Jersey, ResiBridge is rapidly expanding to other cities across the US. We design, build, and manage a cutting-edge hybrid network comprising fiber-optic technology and high-capacity wireless links, optimized for multi-dwelling units (MDUs). Leveraging innovative technologies traditionally reserved for commercial applications, ResiBridge delivers exceptional performance and bandwidth, ensuring a superior customer experience from initial onboarding to ongoing support. At ResiBridge, we value innovation, collaboration, and customer-first solutions. We strive to create an inclusive and supportive workplace where every team member can thrive and make a meaningful impact. ResiBridge is hiring a Lead Network Deployment Technician to supervise field teams across multiple sites and markets. This role blends hands-on technical expertise with field leadership and logistics coordination. The Lead Technician will oversee senior and standard technicians, support market launch efforts, ensure deployment consistency, and own accountability for execution quality in the field. Responsibilities: • Supervise and coordinate teams of Senior and Network Deployment Technicians across concurrent projects, • Travel to new markets to lead deployment crews and establish local operational rhythm, • Act as escalation point for technical field challenges, resolving issues quickly and thoroughly, • Ensure all deployments meet ResiBridge standards for cable routing, labeling, equipment installation, and documentation, • Work closely with the Network Deployment Manager to align daily deployment activities with production goals, • Provide field-level feedback to improve tools, training, and process documentation, • Track progress on deployments, materials usage, and crew performance, escalating risks proactively, • Support and enforce safety practices and jobsite professionalism at all times Requirements: • 5+ years of network deployment experience, including 2+ years in a leadership or supervisory role, • Mastery of structured cabling, fiber optic installation/testing, and wireless equipment provisioning, • Experience leading remote deployments, managing travel crews, and launching new markets, • Strong organizational skills and ability to coordinate multiple field teams simultaneously, • Skilled in reading plans, marking up as-builts, and ensuring documentation is submitted accurately, • Excellent communicator—able to interface with field teams, office staff, vendors, and property management, • Willingness to travel (up to 40%), including overnight stays, to support deployments outside NYC Nice-to-Haves: While not required, the following qualifications will be considered a significant plus: Salary Range$60,000—$75,000 USD Diversity in backgrounds and experiences is key to Fairstead's success. Being an equal opportunity employer is a central tenet of our philosophy that shapes who we are and the communities we serve. Our goal is to ensure competitive total compensation that is commensurate with experience, location, and other market benchmarks. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at

Job DescriptionDescriptionThe Ceramics / Materials Science Front End (FE) Process Engineer is responsible for supporting front-end ceramic processing and manufacturing. This includes not only keeping manufacturing processes fully functional and efficient, but also managing and implementing paths to higher part quality, increasing throughput, and providing higher yields. This position would focus on all aspects of plate manufacturing through firing and finishing. Key Responsibilities • Perform and lead tasks, projects and all processes for plate ceramic plate fabrication in support of manufacturing (batching, casting, green plate fab, bakeout, firing and finishing., • Focus will be on driving yields improvements and process efficiency, • Instill proper data collection and statistical process control, • Through expertise and the above, guide improvements to production processes, • High level of collaboration with Ceramics and Process Transfer Teams, and with Front End Operations Manager, • Significant collaborative engagement with engineers in back end processing (such as metallization) to help ensure that process improvements are fully vetted through final product., • Provide and execute qualification plans for process improvements, • Provide and execute qualification plans for new equipment, • Update operators (and technicians) on procedure changes, production and quality issues, • Direct, train, and transfer skills/knowledge to operator, engineers and engineering technicians, • Investigate new suppliers, technologies for improving production, quality, end cost and throughput., • Evaluate impact of Preventative Maintenance on yield/quality and co-ordinate execution of P.M. schedules; evaluate all maintenance and its possible indicators of problems., • Assist Purchasing, Maintenance, and Operations to determine proper purchase/supply of spare parts, maintenance equipment, and manufacturing equipment., • Update procedures based on changes in manufacturing or engineering improvements as well as environmental issues (ISO9001, ISO14001)., • Execute FMEA, SPC, MSA processesConduct problem troubleshooting (fishbone analysis etc) Skills, Knowledge and Expertise • BS or MS degree in engineering with an emphasis in industrial engineering, materials science, ceramic, or process engineering, • Strong data management skills (data management, interpretation and SPC evaluations to guide improvements, • Self-directed, highly professional and collaborative, • Direct engagement with process transfer group, • Strong verbal and written communication skills, • Strong attention to detail and propensity for accuracy of work product, • Accountability to the timelines of task completion, • Able to manage multiple tasks and priorities within a fast-paced workplace, • Strong problem solving skills, • Experience in total quality, six sigma or other similar environments preferred. BenefitsWhat’s in it for you on Day 1: • Medical, dental and vision insurance plans, • Prescription Drug Plans, • Basic Life Insurance, • 401k plan with company match, • Tuition Reimbursement Program, • Security Clearance Incentive Program, • Employee Referral Program, • Overtime opportunities, • Alternate work schedules available, • Flex PTO and NYS Sick and Safe Leave, • Paid HolidaysExciting Onsite Perks:, • Free Starbucks coffee available at our café, • Free access to our Fitness Center, • Fresh food is available for purchase in the cafeteria store. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

Job Description Be the growth engine behind a Legaltech company on the rise. Orbital is transforming how lawyers and property professionals understand risk in real estate. We’re building the go-to platform for real estate legal due diligence used by some of the most respected law firms and investors in the UK. Now, we’re bringing that momentum to the US, and we’re looking for a Demand Generation Manager to help make it happen. This is not a “plug-and-play” marketing job. We’re not handing you a playbook, we’re asking you to help write it. As our first dedicated Demand Gen hire in the US, you’ll build full-funnel programs from the ground up: testing, iterating, and scaling what works. You’ll work hand-in-hand with our Sales team to turn awareness into qualified pipeline, and with Product Marketing to sharpen our message and market fit. If you’ve built demand gen functions in early-stage SaaS before, especially in complex, high-account-value B2B environments, you’ll know the thrill (and chaos) of figuring it out as you go. That’s exactly what we need, someone who thrives in ambiguity but brings analytical rigour, consistently using data to bring clarity, spot what’s working, and double down with precision. Why this role matters • You’ll be powering up our inbound growth engine, turning curiosity into conversations and conversations into deals, driven by a deep understanding of what the data is telling us at every stage of the funnel., • You’ll be a strategic partner to our Sales and BDR teams, not just a lead machine, bringing structure, insight, and measurable impact to how we attract, nurture, and convert prospects., • You’ll have real ownership, working closely with our Director of Marketing and a small but mighty (and growing) Marketing team (Product Marketing + Marketing Exec). The team is currently based in London, with plans to expand and establish a presence in both London and NYC., • You’ll shape how we scale in a new market, with the freedom to build campaigns, processes, and tooling that actually work for this ICP, backed by data, optimised through iteration, and measured by pipeline contribution. What you’ll do • Build and own the roadmap for demand generation, from awareness to acquisition, • Design and launch multi-channel campaigns, including email, paid search and paid social, alongside SEO and webinars efforts to drive qualified pipeline, • Run ABM experiments to engage high-value target firms based on geography, firm size, and use case, • Define and track key metrics across the funnel (MQLs, SQLs, conversion rates), continually working to improve performance, • Partner with Sales to align targeting, lead scoring, and nurture flows, • Manage our Martech stack (paid media tools, analytics) and recommend what to add, or ditch, as we grow Requirements We think you’ll love this role if: • You’ve built a demand gen function before, ideally in a Series A–B B2B SaaS company targeting professional services, legal buyers or similar industries, • You’re obsessed with data. You are able to build dashboards, diagnose funnel bottlenecks and conversion drop-offs, track campaign performance in real time, allocate spend dynamically based on CPL/CAC and pipeline efficiency, and deliver crisp reporting and forecasting that ties marketing activity to revenue impact, • You’re a hands-on operator who thrives in the builder phase: testing, learning, adjusting, • You’ve run successful paid media campaigns (LinkedIn, Google Ads) and know how to manage a Martech stack end to end, • You can talk in terms of results, what you delivered, how you did it, and what you learned along the way, • You understand the difference between any leads and the right leads, extended buying cycles and you know how to reach hard-to-find buyers with a high-touch approach You’ll thrive here if you are: • Scrappy and self-starting, you get energy from building, not waiting, • Calm under pressure, you don’t get overwhelmed, even when there’s a lot to figure out, • Collaborative and coachable, you love working with smart teammates across functions, • Excited about the journey, not just the outcome. You want to help shape something big from an early stage. The team you’ll join You’ll be part of our growing Marketing team working closely with: • Our Director of Marketing (your manager), setting strategy and priorities, • Our Senior Product Marketing Manager, helping you nail the right positioning and messaging, • Our Marketing Executive, supporting campaign ops and execution, • Compensation: Base salary of $140,000-160,000 depending on experience., • Comprehensive health benefits: Your well-being is important to us. We provide competitive medical, dental, and vision coverage to help you stay healthy and supported., • Flexible Work: We believe in flexibility, but we’re also big on in-person collaboration. This role is based in our Manhattan office three days a week (Monday, Wednesday, and Thursday)., • Preparing for your future: We offer a healthy 401(k) match., • Ownership: We give you real ownership in the company through stock options, so you share in our success., • Rest and Recharge: You’ll receive 20 days of paid vacation, in addition to 11 public holidays. We encourage real breaks so you can show up as your best self., • Equipment & Development: We invest in your growth with top-quality gear, a $1,200 annual development budget, and ongoing training to help you build skills and confidence from day one., • Commuter Benefits: We support your commute. Whether you’re taking the bus, train, or subway, by helping you use pre-tax dollars to offset the cost.

Job DescriptionDescriptionThis position is responsible for supporting front-end ceramic processing and manufacturing. This includes not only keeping manufacturing processes fully functional and efficient, but also managing and implementing paths to higher part quality, increasing throughput, and providing higher yields. This position would focus on all aspects of plate manufacturing (batching, calcination, tape casting, binder bake out, green plate fabrication, firing and finishing. This role includes mentorship of other engineers in the Front End group. Key Responsibilities • Perform and lead tasks, projects and all processes for plate ceramic plate fabrication in support of manufacturing (batching, casting, green plate fab, bake out, firing and finishing., • Focus will be on driving yields improvements and process efficiency, • Instill proper data collection and statistical process control, • Through expertise and the above, guide improvements to production processes, • Mentor and guide other process engineers in this group, • High level of collaboration with Ceramics and Process Transfer Teams, and with Front End Operations Supervisor, directed towards process improvements, • Significant collaborative engagement with engineers in back end processing (such as metallization) to help ensure that process improvements are fully vetted through final product., • Provide and execute qualification plans for process improvements, • Provide and execute qualification plans for new equipment, • Update operators (and technicians) on procedure changes, production and quality issues, • Direct, train, and transfer skills/knowledge to operator, engineers and engineering technicians, • Investigate new suppliers, technologies for improving production, quality, end cost and throughput., • Evaluate impact of Preventative Maintenance on yield/quality and co-ordinate execution of P.M. schedules; evaluate all maintenance and its possible indicators of problems., • Assist Purchasing, Maintenance, and Operations to determine proper purchase/supply of spare parts, maintenance equipment, and manufacturing equipment., • Update procedures based on changes in manufacturing or engineering improvements as well as environmental issues (ISO9001, ISO14001)., • Execute FMEA, SPC, MSA processes, • BS or MS degree in engineering with an emphasis in materials science, ceramic, or process engineering, • 5 years successful ceramic process engineering experience with a high performing passive components company (including direct experience with ceramic processes noted above)., • Serve as a key subject matter expert in ceramic processing for the KCC site, • Strong data management skills (data management, interpretation and SPC evaluations to guide improvements, • Self-directed, highly professional and collaborative, • Direct engagement with process transfer group, • Strong verbal and written communication skills, • Strong attention to detail and propensity for accuracy of work product, • Accountability to the timelines of task completion, • Able to manage multiple tasks and priorities within a fast-paced workplace, • Strong problem solving skills, • Medical, dental and vision insurance plans, • Prescription Drug Plans, • Basic Life Insurance, • 401k plan with company match, • Tuition Reimbursement Program, • Security Clearance Incentive Program, • Employee Referral Program, • Overtime opportunities, • Alternate work schedules available, • Flex PTO and NYS Sick and Safe Leave, • Paid HolidaysExciting Onsite Perks:, • Free Starbucks coffee available at our café, • Free access to our Fitness Center, • Fresh food is available for purchase in the cafeteria store. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

Job Description Electrical and Instrumentation Technician installs, services, troubleshoots and performs preventive and predictive maintenance functions on plant equipment. This equipment includes but is not limited to; plant lighting equipment, electrical circuits, motors, starters, motor control centers, programmable controllers, control panels, transformers, switches, transmitters, automatic valves, regulators, guide systems, distributed control systems, PLC's, overhead cranes etc. May perform additional duties as assigned. Minimum Requirements: Must have a high school diploma or general equivalency diploma (GED). Must have basic math skills. Must be mechanically inclined and a minimum of 2 years of electrical / instrumentation training and/or experience. Essential Job Functions: • Able to troubleshoot, repair and wire 120 volt and (3) phase 460 volt circuits and electrical equipment., • Basic understanding of Electricity and Instrumentation., • Able to troubleshoot, repair and install distribution systems up to 460 volts., • Able to troubleshoot, repair and install controls: coils contactors, relays, brakes etc. LANGUAGE SKILLS: Able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS: Able to read a tape measure with speed and accuracy. Able to calculate figures and amounts such as percentages, measurement, volume and rate. Able to apply concepts of high school math. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form. Ability to deal with problems involving several concrete variables in standardized situations. Leading root cause analysis and problem solving teams. Analytical and field troubleshooting skills. TECHNICAL SKILLS: Working knowledge of mechanical and electrical machinery, including conveyer systems, breakers, boilers, hydraulic and pneumatic systems, etc. Knowledge of computer systems and the ability to learn new complex applications. CERTIFICATES, LICENSES, REGISTRATIONS: May be required to maintain a current Lift Truck Operator License and/or other appropriate certification to work in certain areas or on certain equipment. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand, walk, and talk or hear. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and vibration. The noise level in the work environment is usually loud. • Able to install transformers up to 460 volt, • Able to interpret wiring drawings / diagrams., • Able to wire motors single phase, 3 phase 460 volt and 3 phase 4160 volt as per NEC / OSHA codes and Pratt standard operating procedures., • Able to use and interpret a Megohm meter., • Able to use and interpret a multimeter; volts, amps and ohms, • Able to troubleshoot and install switches; proximity, speed, limit, pressure etc., • Able to run and bend conduit and pull wire., • Able to troubleshoot control valves and transmitters., • General knowledge of electrical and pneumatic systems in mill., • Understanding of pneumatic controls including controllers, actuators, positioners and valves.

Job DescriptionCompany Description The CIMA Group LLC doing business as Wana Brands is a subsidiary of Canopy USA, LLC, a leading vertically integrated, multi-state operator in the United States cannabis industry. With the transition of Acreage Holdings to Canopy USA, LLC in December 2024, Canopy USA, LLC is now positioned to consolidate operations across its three business units – Wana, Jetty, and Acreage – realizing synergies, cost savings, and supporting growth in state-legal markets across the U.S. Through coverage of key market segments including flower via Superflux, vape and concentrates via Jetty, edibles and beverages via Wana, and retail through The Botanist, Canopy USA, LLC is well positioned to accelerate growth with an emphasis on the Midwestern and Northeastern U.S. markets. As newly formed Canopy USA, LLC, we are building a stronger, more agile organization that will unlock greater opportunities across the growing US cannabis market. Summary The Field & Trade Marketing Manager position leads promotion of all company and related subsidiary and affiliate company brands and executes marketing campaigns and promotions that align with our brands goals. This person will work closely with marketing, their designated regional sales team, and our distribution partners to promote lead generation and create upsell opportunities. This role will be responsible for overseeing all field marketing efforts in their region. Essential Functions & Responsibilities • Collaborate with sales and marketing to develop, implement, and analyze marketing initiatives and strategies specific to the region for our brands and related company brands., • Partner with regional sales and distribution partners on strategies to drive revenue through budtender and account engagement including field activities, merchandising, budtender education, and community engagement., • Produce and assist with the execution of local monthly marketing calendar that includes any activations, paid/earned media, and support around any national campaigns., • Educate, engage, and inspire customers and dispensary staff as the face of our brands with knowledgeable insights about our products and promotions, including but not limited to scheduling and conducting budtender trainings and consumer-facing pop-up events with preferred retail partners., • Support national and regional initiatives to drive sales performance and build brand loyalty., • Lead and manage territory Brand Ambassador team including schedule for in-store activations and store visits., • Lead, deploy, and manage in store visual execution and brand standards for themselves and their field team., • Develop, collect and share monthly marketing and sales recaps with key stakeholders., • Create and manage key brand partnerships with local businesses and non-profit organizations who can foster our goal to build community relations and awareness., • Work with Sales Director, and Regional Field & Trade Marketing Manager, and team to develop metrics to measure the success of all initiatives with the goal of increasing effectiveness and driving the scale of programs., • Collaborate and share best practices and lessons with other Field Marketing Reps on a monthly call., • Track results of all national and regional campaign activity and make recommendations for future activity., • Additional responsibilities as requested or required by the Regional Field & Trade Marketing Manager.Job Requirements:, • Passion for company and related company our brands and the industry., • Must be licensed/badged according to state requirements., • Ability to give dynamic product and marketing presentations., • Ability to build relationships and rapport with internal and external partners., • Excellent writing skills., • Presentation building skills through Canva, PowerPoint or other visual presentation software., • Knowledge of digital marketing, advertising, event planning, out of home media, and other advertising mediums., • Ability to help plan, execute, and analyze an overall marketing strategy., • Ability to multi-task and work effectively with a variety of tasks and partners (both internal and external); must be able to work cross-functionally with sales and operations teams to effectively generate, execute and report on marketing programs., • Ability to interact with various levels of stakeholders and make decisions based on data and insights., • Excellent knowledge of marketing planning tools and strategies., • A reliable vehicle or transportation for travel to in-state events, retail locations and any field related work. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications Education & Experience: • BA Degree in Business, Marketing or related field required., • Minimum 3-5 years of relevant work experience in field marketing/brand ambassadorship and implementing integrated campaigns across multiple locations., • Dispensary or related retail experience.Benefits, • Annual compensation commensurate with experience from $60,000 - $90,000, plus potential bonuses, • Full suite of medical, dental, and vision insurance, • Paid parental leave, • 401(k), • Paid Time Off, • Long-Term Disability, • Employee Assistance Program, • Employee life insurance and supplemental life, • Spouse and child life and AD&D, • Pet insurance, • FSA and HSA availableSchedule:, • This position regularly works 5 days a week, average 40 hours per week, with hours that meet the needs of the business and our accounts. This position does require evening and weekend work depending on the event schedule. Please confirm with the supervisor regarding the expected working schedule. CODE OF CONDUCT All employees are expected to represent the values and maintain the standards contained in the Company’s Code of Conduct. CHANGES TO THIS JOB DESCRIPTION The Company may amend this job description in whole or part, at any time, without notice based on business needs. E-Verify Participation Notice This Employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. What is E-Verify? E-Verify is an internet-based system that compares information from and employee’s Form I-9, Employment Eligibility Verification, to data from the U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility. AAP/EEO Statement The CIMA Group LLC is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, disability, or protected Veteran status. We appreciate your interest in The CIMA Group LLC. If you need assistance with completing an online application due to a disability, please send a request to . Please be sure to include “Accommodation Request” in the subject line. We anticipate filling this position by July 31st, 2025. Powered by JazzHR emkW7iJig0

Job Description Lioni cheese manufacturer is seeking a qualified and motivated full-time Wastewater Operator to join our operations team. Candidate must hold a valid N1 Wastewater Treatment License and have a strong understanding of wastewater treatment processes, safety protocols, and maintenance of related equipment. Requirement Valid driver’s license Please submit your resume and copies of relevant certifications.

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. BENEFITS Nexpera's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE The Chemical Operator will monitor and operate equipment and facilities, including field equipment, ensuring quality and conformance with standard operating procedures. Additional responsibilities include always maintaining safety standards and initiating and following emergency procedures when necessary. The Operator will perform basic maintenance repair and upkeep on area equipment. Job tasks are performed in control room, lab areas, and throughout various operation areas of the site. The site operates a process safety management-covered process that produces sulfuric acid in multiple concentrations. Product is shipped in rail cars, tank trucks and portable totes. PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Start up and shut down (normal and emergency) plant systems and components., • Operate, monitor and control plant systems; visually inspect, monitor equipment and process conditions., • Prepares equipment for maintenance work by isolating, clearing and locking out., • Reviews, follows and, if qualified, revises detailed process operating procedures, maintenance procedures and safety procedures., • Troubleshoots equipment to restore to normal operation., • Analyzes charts and logs to identify potential or actual problems., • Identifies system problems to stabilize plant to normal conditions., • Trains new operators in the area, reinforcing safety and environmental principles., • Performs loading and unloading of railcars, tank trucks and totes., • Perform laboratory analysis of products., • Clerical duties as required., • Shipping duties as required., • Operate mobile equipment including manlifts, fork trucks, yard-dog and trackmobile., • Participate/Lead various site teams., • Recognize abnormalities in a High Hazard work area and promptly initiate action to secure the safety of all personnel along with protection of the environment and local community. Qualifications In order to be qualified for this role, the following is required: • High School Diploma/GED equivalent, • Minimum of 2 years’ experience in an industrial or manufacturing environment, • Ability to navigate the tools of Microsoft Office Suite (Outlook, Word, Excel, etc.) and Google Suite (Sheets, Docs, etc.) and learn new computer systems and software applications, • Willing and able to work 12-hour rotating shifts, including overtime, nights, weekends, holidays and short notice call-in if required, • Willing and able to lift up to 50 lbs, • Willing and able to work in a High Hazard environment; outdoors, indoors, elevated heights and confined spaces, • Willing and able to wear required PPE (personal protective equipment) such as steel toe shoes, hardhat, protective eyewear, face shields, respirator, chemical acid suit, etc., • Willing and able to climb stairs, ladders; stand, walk, stoop, bend, kneel, crawl; visual acuity for close work; able to reach overhead; able to hear and respond to alarms, • Willing and able to acquire a boiler’s license, • Current and valid driver’s license – willing and able to obtain powered industrial truck (i.e., fork trucks and manlifts) certification, • Willing and able to operate a trackmobile to move railcars on-site and a yard-dog to move product trailers as needed on the site., • High Hazard/Chemical operations experience, • Experience reading and interpreting Schematics, Pipe & Instrumentation Diagrams, Procedures, Manufactures’ Literature, Safety Requirements, General Instructions; ability to learn and detect process deviations, • Experience operating fork trucks, • Experience with SAP or equivalent Manufacturing Operations software Successful candidates must be able to perform the essential functions of the job with or without accommodation. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job DescriptionSports (Dance) Videographer / Camera Operator Duration: February – June 2026 Location: Nationwide travel across the U.S. Compensation: $25/hr + overtime + guaranteed daily minimum + all expenses paid About DanceBUG DanceBUG is the industry leader in Dance Media and Software, with nearly 25 years of innovation serving the dance community. From groundbreaking products like Video Judge to our full suite of Registration, Scheduling, Tabulation, and Streaming tools, we’re trusted nationwide as the gold standard for dance videography and photography. 🌐 Learn more about us here: What We Do at DanceBUG The Role We’re looking for passionate and skilled Videographers/Camera Operators to join our seasonal team. In this role, you’ll travel nationwide to capture and stream dance competitions, recitals, and workshops—helping us deliver high-quality media to studios and dancers across the country. Key Responsibilities • Set up and operate video, audio, and streaming equipment on-site, • Conduct daily video/audio checks to ensure broadcast quality, • Film and log performances, manage live streams, and upload daily footage, • Handle data transfers (FTP/shipping) after events, • Experience filming live events, sports, or action performances, • Strong technical skills with camera operation (exposure, white balance, audio), • Able to lift 50 lbs, work 12–16-hour days, and travel Thurs–Mon as needed, • Must live within 1 hour of an airport and hold a valid U.S. driver’s license, • Comfortable with loud music, flashing lights, and extended stationary periods, • Must pass a Criminal Background and Vulnerable Sector checkPerks, • Paid training in Jan/Feb 2026, • All travel and hotel accommodations covered (single-occupancy rooms), • Travel time is paid, • All equipment providedKey Dates Virtual Training: 1 day each week in January (4 days total) Infield Training: 2 weekends onsite at an event in January and February Mandatory Dates: You must be available to work on the following weekends (Fri–Sun, with travel on Thurs/Mon as needed): • Feb 27–Mar 1, Mar 6–8, Mar 13–15, Mar 20–22, Mar 27–29, • Apr 10–12, Apr 17–19, Apr 24–26, • May 1–3, May 8–10, May 15–17, May 29-31 Apply Now: Become part of DanceBUG Inc. and help us set the standard in dance media! Powered by JazzHR sGoeVUYOTe

Job Description The Building People has an opportunity available for a Senior Chief Engineer to oversee approximately 1,000,000 SF in Kings Point, NY (North-Western Nassau County). The Senior Chief Engineer will cover the following duties: Duties/Responsibilities: • As a member of the contract PMO, to oversee the maintenance and continuous operation of all building systems, • Supervisory and management support to Preventive Maintenance Supervisor, engineers and maintenance staff, • Create and routinely update a documented plan that includes preventive, predictive and reactive maintenance procedures, • Participate regularly in client-facing and property team communications, • Lead, create and manage the engineering budget and participate in the overall operating budget process, • Assist in the development of a capital improvement plan, • Select, schedule, supervise and direct contractors/vendors, monitor and document performance, • Respond effectively to emergencies and service calls, • Provide timely update to Property Management Team, • Assist with soliciting proposals from vendors for assigned projects., • Lead and organize ongoing technical, safety, and operational process training programs and procedures, • Other duties as requested by property management team and/or client, • Oversee large, complex facilities and maintenance projects, • Contributes to the organization through strategy definition and implementation of directed initiatives, • Develops or assists with documentation and information maintenance, • Ensure all facilities systems are in proper working order by ensuring preventative maintenance is conducted and issues are addressed promptly, • Leads complex facilities projects, • Accurately estimates building costs and project timelines, • Communicates status of facilities projects to supervisor and others impacted in the facility, • Oversee maintenance and operations contracts with vendors, • Secures and maintains maintenance and operations contracts, • Ensure contracts are maintained and services are scheduled as needed to maintain continuity of operations, • Prepares reports and maintains records associated with vendor operation and maintenance, and facility operation and maintenance, • Produces written reports as requested or needed and by specified deadline, • Develop and Implement Facility Related Standard Operating Procedures (SOP), • Prepares and/or implements a detailed preventative maintenance plan for equipment to include routine testing of critical systems and equipment, • Leads or assists in coordinating or performing inspections, • Assists with safety equipment, inspection, certification, and maintenance, • Assists with establishing emergency contact procedures for unscheduled system interruptions or equipment malfunctions, • Assist as necessary with activities related to safety and operations committee meetings, • Provides technical assistance during emergency response incidents as necessary, • Minimum 15 years of progressive related experience in Building Infrastructure Operations and Management, • Ability to prepare clear strategic planning procedures and user-friendly templates to assist entities in undertaking forward, strategic planning., • Broad knowledge of all phases of engineering, field activities, production techniques, building materials, and construction methods for development of various work areas., • Understands technical issues and costs related to selection of design features and unique requirements., • Broad knowledge of building industry, government compliance & regulatory standards and environmental compliance laws and requirements., • Experienced with engineering work planning, scheduling and cost estimating., • Experienced managing knowledge of sustainability and its integration into the design and the construction of various buildings., • Must have excellent interpersonal skills, be a team player and have a knowledge sharing approach., • Ability to solve problems by thinking laterally and be able to understand the needs and requirements of the client and various entities – to provide planning / design / feasibility solutions in a multi -disciplinary / multi - sectional context., • Must be self-driven and able to plan and execute work without direct supervision from senior management and/or peers., • Must be flexible and adapt to working in a demanding environment, including the need to travel and work remotely if / when required., • Vocational or technical training in MEP fields., • Professional licensing in aligned MEP and Construction trades., • Experience in managing and maintaining Fire Life Safety systems and Fire Suppression, • Substantial experience in the maintenance and operation of a highly technical facility as well dispersed buildings with systems integration., • Significant experience in managing multiple projects and tasks simultaneously., • Supervisory experience, demonstrated experience planning, scheduling, and supervising complex maintenance projects., • A well-rounded background in all the building trades., • Experience with high pressure steam boilers., • Knowledge and experience with Geothermal Heat Pump systems and infrastructure., • Demonstrated knowledge of Direct Digital Control (DDC) systems., • Skill in problem solving and critical thinking associated with HVAC, Electricity, Plumbing; and other building maintenance., • Demonstrated skill in leadership., • Demonstrated oral and written communication skills., • Demonstrated interpersonal skills and ability to engage with a diverse group of people., • Demonstrated computer skills including Microsoft word, Excel, software for building equipment and control systems, familiarity with programmable logic controllers; basic computer hardware troubleshooting skills., • Ability to coordinate a large building and/or grounds program., • Ability to effectively read and interpret blueprints, construction plans and written specifications., • Universal CFC, • EPA 608, • Journeyman License (or equivalent) for one or more of the following: Electrical, Plumbing, Mechanical, • Boiler Operator certification, • CFM (IFMA), • PMP, • NATE (North American Technician Excellence) w/ specialty, • NICET certified, • UA Star HVAC Mastery Certification, • HVAC Excellence Professional Level Certification

Job Description Ronald Mark Associates is looking for a 2nd and 3rd Shift Quality Assurance Technician. Come join our team! Job Description -Quality Assurance Technician Position Time - 3:00pm - 11:00pm/11:00pm - 7:00am Duties and Responsibilities: * Perform routine and documented Quality Control checks on raw materials, in-process materials and finished products according to required specifications and written Standard Operating Procedures. * Provide product quality feedback to the Production Supervisor and/or Lead Operator during production run. Must report and communicate any QC issues to QC/Lab Manager, Shift Supervisor and line operator during a production run and troubleshoot collectively. * Provide clear instruction when product quality is not within required specifications and implement QC hold procedures and undertake corrective actions as required. Must report any QC hold material to QC/Lab Manager and Shift Supervisor. * Organize and upload QC Test Inspection forms on Google-drive in accordance with the production schedule. Enter QC data on a timely basis and audit process data during production run. * Audit raw materials used, in process materials, finished good roll weights and product labeling during a production run. * Audit QC Report for completed production runs and ensure all testing is completed. Issue Manufacturer Certificate of Analysis and Certificate of Compliance as required. * Maintain / improve Quality Manuals and compliance to Quality Objectives. This includes organizing retain samples and Vendor’s certificate of analysis. * Maintain Material Safety Data Sheet documentation. Update folders when new materials are qualified and approved. * Maintain proper use of lab equipment and perform equipment calibration as required. * Assist with QA site audits as required. * Must act as a back up to the other QA / Lab Technicians which includes working on different shifts as required. * Assist with Product Development and R&D works as required. * Perform all duties safely and keep the lab area clean and organized. * Perform other duties assigned by the QC/Lab Manager. Skills & Knowledge Required * Good time management skills * Good organization skills and attention to detail * Problem analysis and problem-solving skills * Team work * Professional integrity * Ability to work independently * Must be flexible to alternate between shifts when required Qualifications * High school diploma or GED certificate * Associate degree or QC experience preferred * Experience in a manufacturing environment a plus * Communication and computer skills

Job Description Assembly is a fast-growing, venture-backed company with the ambition to transform the way we design and deliver imaginative, innovative urban architecture. We combine technology, design, architecture, and manufacturing to create mid/high-rise urban buildings that are greener and higher-quality, using a system that is faster and more efficient. As our pipeline grows and the system is refined, we unlock increasing cost efficiencies, ensuring long-term value for developers and the industry. As the Director of Manufacturing Engineering, you will define and implement the playbook for fabricating and assembling Assembly modular units within both existing and new manufacturing facilities. You and your team will codify the entire manufacturing process, ensuring that third-party factories can efficiently and precisely build our high-rise modules. This includes developing repeatable, scalable work instructions, designing transportable and reusable tooling, integrating digital manufacturing technologies, and serving as sustaining engineers to drive continuous improvement. While the goal is to scale through external partners, you must also be prepared to establish and manage temporary in-house assembly operations when necessary, requiring adaptability and strategic problem-solving. This role is essential to executing Assembly’s vision for distributed manufacturing, ensuring seamless integration between design, engineering, and production. You will be responsible for standardizing processes across third-party factories while also maintaining the technical and operational readiness to establish rapid-deployment assembly facilities when needed. Your leadership will ensure that every Assembly module is built with precision, efficiency, and consistency, regardless of location. You Will: Shape the future of industrialized construction by applying advanced manufacturing principles to an industry ripe for transformation. Design a first-of-its-kind manufacturing system that scales modular high-rise construction across multiple factories, integrating automation and digital workflows. Lead the convergence of aerospace- and automotive-grade manufacturing with building construction, developing processes that drive quality, efficiency, and scalability. Develop and implement a scalable manufacturing system that enables partner factories to efficiently fabricate and assemble modular units while maintaining the capability to launch in-house assembly operations when needed. Create a standardized manufacturing playbook, defining labor requirements, detailed work instructions, and quality control measures to ensure consistent production across multiple facilities Leverage digital manufacturing technologies (MES, ERP, and factory automation tools) to optimize assembly processes, monitor production quality, and drive operational efficiency. Lead process innovation and continuous improvement, acting as sustaining engineers to refine manufacturing workflows based on feedback from production partners. Establish and oversee pilot programs and first-article builds to validate new processes, tooling, and quality standards at partner facilities. Collaborate cross-functionally with supply chain, logistics, and design teams to seamlessly integrate manufacturability with design intent Define and track key performance indicators (KPIs) to measure production efficiency, scalability, and quality performance. Develop and lead a high-performing manufacturing engineering team, fostering a culture of trust, innovation, and professional growth. Work closely with executive leadership to align manufacturing strategies with overall business objectives while maintaining cost-effectiveness through Capex and Opex forecasting. Champion lean manufacturing principles in collaboration with partner factories, improving efficiency, quality, and cost-effectiveness at scale. You Have: Experience in high-precision, scalable manufacturing industries such as aerospace, automotive, or industrial equipment, with an interest in applying these skills to the built environment. A Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Aerospace Engineering, or a related discipline. 10+ years of experience in manufacturing engineering, process development, or production engineering in industries such as aerospace, automotive, or industrial manufacturing. The ability to think beyond traditional factory models and implement distributed, flexible manufacturing strategies that scale across multiple production sites. A background in designing and optimizing manufacturing processes for complex, large-scale products, with a focus on modularization and efficiency. Strong problem-solving skills with a systems engineering mindset—able to connect design, supply chain, production, and logistics into a seamless workflow. Experience designing transportable and reusable tooling and fixtures to optimize manufacturing efficiency and scalability. Proficiency with Manufacturing Execution Systems (MES), ERP systems, and digital factory tools, along with the ability to develop detailed work instructions and labor requirement documents for production teams. The ability to work with cross-functional teams, external suppliers, and manufacturing partners to drive scalable production solutions. You Are: A strategic planner and a hands-on operator, comfortable working in both partner-driven and in-house assembly environments. Capable of building and launching a rapid-deployment assembly facility. A clear communicator who can translate complex manufacturing requirements into actionable plans for both internal teams and external partners. Passionate about solving engineering challenges that blend digital and physical manufacturing, bringing industrialized processes to an industry in transformation. A manager of complex challenges with a solutions-oriented mindset, ensuring agility and efficiency in a rapidly evolving industry. A proven leader who leverages emotional intelligence and empathy to create an inclusive, high-trust work environment, enabling teams to perform at their best. Compensation Range: $170k- $250k / year Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills and experience. Equal Employment Opportunity (EEO) Statement Our company does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor. To Apply Submit: To apply, submit your application at the top of this page or visit our Careers Page.