Government contract jobs in Austin, Texas - Page 5Create job alerts

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior FPGA Engineer II - Network to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for FPGA designs and systems through all phases of the development process. The ideal candidate will have experience in FPGA design, verification, test, and deployment at the HDL level. FPGA HDL designs will include high-speed serial interfaces and data streams, digital processing cores, multiple clocks and clock domains, and management interfaces. Testing, validation, and verification will also be central tasks for any FPGA design. Experience in board-level hardware design is also desirable. The successful candidate will present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering or Computer Engineering from an accredited university or institution., • Minimum of 6 years of industry or university research experience in the design, analysis, and implementation of FPGA systems., • Production experience in design, implementation, and integration of OSI Layers 2 and 3 networking systems, including protocols such as Ethernet, IP, and MPLS., • Experience in networking system design, especially in determining throughput and memory requirements., • Expertise in writing and reviewing VHDL., • Proficiency in writing and reviewing SystemVerilog for block and system verification., • Expertise in FPGA design and verification tools for modern complex FPGA and SoC platforms such as Xilinx Vivado and Siemens Questa., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Deep understanding of network design and an ability to derive requirements based on high-level objectives., • Familiarity with non-FPGA networking platforms including ASICs and general-purpose processors., • Aerospace design and qualification., • Worst-case analysis, failure method and criticality analyses, and reliability analysis., • Experience with board-level hardware design., • Familiarity with communications systems, such as digital signal processing.

Job DescriptionDescription: TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK’s ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Quality Control Coordinator to join our team in Austin, TX. In this role you will be responsible for all aspects of quality control throughout all phases of assigned projects as well as develop and maintain the quality control plan for assigned projects. Why TAK? • Full Time, • Paid Weekly, • Compensation: $20 - $25 per hour, DOE, • Company provided vehicle, laptop, & phone, • Full Benefits Package (Medical, Dental & Vision), • Paid Time Off, • 401(k) with Company Match!, • 25K Company Paid Life Insurance, • Independent Work & Team Collaboration, • Responsible for all aspects of quality control throughout all phases of assigned projects, • Develop and maintain the quality control plan for assigned projects, • Visit project sites routinely, performing inspections to ensure work is completed in compliance with contract requirements, • Prepare and submit quality control reports, • Communicate with internal and external leadership, escalating out of compliance work, safety, or quality control concerns, • Conduct quality control meetings as needed, • Other duties as assignedRequirements:, • 1-2 years of telecommunications construction quality control experience required (i.e. must have worked in a cable install/construction role for a cabling company, an electrician position where cabling projects were completed, ISP or OSP underground or aerial construction experience, etc.), • Ability to travel daily to job sites in the area and open to a variety of schedules; evenings and/or weekends as needed, • Ability to develop an understanding of company quality control program, company standards, procedures, codes etc., • Ability to learn how to read and interpret construction drawings and blueprints, • Ability to learn and understand OSHA safety requirements and NESC (National Electrical Safety Commission) safety guidelines, • Ability to work in a fast-paced environment with multiple priorities, • Ability to lift and carry 70lbs consistently, • Ability to complete work outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time, • Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools, • Must provide a valid government-issued photo ID for verification; a driver’s license is required if the role involves driving, • Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting .

Job Description Skyways designs, builds, and operates fully autonomous long-range cargo aircraft. We have been flying real missions with real customers since 2017. Our V2 carries 30 lbs up to 500 miles and our V3 carries 100 lbs over 1,000 miles with 20+ hours of endurance. Both use a dual-hybrid design that takes off like a helicopter and cruises like a plane. We are currently flying on three continents, in controlled national airspace under FAA oversight, and in support of U.S. military operations. Backed by Y Combinator and a $37M STRATFI contract from the U.S. Air Force, we are moving from prototype to full-rate production with a path to Program of Record. Based in Austin, we are scaling fast and hiring people who want to build the world's largest fleet of autonomous logistics aircraft. The OpportunitySkyways is hiring a Senior Manufacturing Engineer to lead the development of manufacturing processes as aircraft move from prototype builds toward repeatable production. This role sits at the intersection of engineering and production, ensuring aircraft designs can be built efficiently and consistently. You will work closely with mechanical, electrical, and flight teams to improve manufacturability, develop tooling and build processes, and support aircraft production as deployments grow. This role requires strong problem solving skills and the ability to work directly with hardware during aircraft builds.What You'll Do: • Develop manufacturing processes for aircraft components and assemblies, • Create and maintain work instructions, build documentation, and manufacturing workflows, • Design fixtures and tooling that improve aircraft assembly efficiency, • Lead troubleshooting and resolution of manufacturing issues during aircraft builds and integration, • Work closely with engineering teams to improve design for manufacturability, • Collaborate with suppliers and vendors to support hardware production, • Identify process improvements that increase build efficiency, quality, and repeatability, • Help transition aircraft from prototype builds toward scalable productionWhat You'll Bring:, • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related field, • Experience developing manufacturing processes for complex hardware systems, • Experience working with composite structures, • Experience creating work instructions and production documentation, • Strong troubleshooting and problem solving skills related to hardware builds, • Comfort working directly with production teams and prototype builds, • Ability to collaborate closely with engineering teams to improve manufacturabilityBonus Points:, • Experience with aerospace, robotics, or autonomous systems manufacturing, • Experience supporting early stage hardware companies scaling production Due to U.S. government contract requirements, this role is limited to U.S. citizens, U.S. permanent residents, or candidates from specific countries authorized under applicable export control regulations. Skyways is an Equal Opportunity employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, national origin, sex, sexual orientation, gender identity, disability, protected veteran status or any other factor protected by applicable local, state or federal laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Skyways designs, builds, and operates fully autonomous long-range cargo aircraft. We have been flying real missions with real customers since 2017. Our V2 carries 30 lbs up to 500 miles and our V3 carries 100 lbs over 1,000 miles with 20+ hours of endurance. Both use a dual-hybrid design that takes off like a helicopter and cruises like a plane. We are currently flying on three continents, in controlled national airspace under FAA oversight, and in support of U.S. military operations. Backed by Y Combinator and a $37M STRATFI contract from the U.S. Air Force, we are moving from prototype to full-rate production with a path to Program of Record. Based in Austin, we are scaling fast and hiring people who want to build the world's largest fleet of autonomous logistics aircraft. The Opportunity Skyways has built a highly automated, long-range, cargo-delivery aircraft ready for the regulator's approval across a wide range of use-cases. This role owns how we make that transition real. As Regulatory and Certification Lead, you will shape the certification strategy for novel automated aircraft and operations, working directly with senior regulators and internal technical leaders. You will influence aircraft design, safety architecture, and operational concepts along the way. This is a high-ownership role for someone who wants to help define how highly automated aircraft are approved, deployed, and scaled globally.Certification & Regulatory Leadership: • Own, with the VP, the end-to-end certification and validation strategy for Skyways aircraft and operations, from early regulatory engagement through approval., • Serve as a technical and strategic interface with aviation authorities (FAA, EASA, and other global regulators), leading familiarization briefings, technical interchange meetings, and certification roadmap alignment., • Lead development of certification artifacts, including certification bases, White Papers, Means of Compliance, Issue Papers, and Instructions for Continued Airworthiness., • Provide authoritative guidance across engineering, manufacturing, maintenance, and operations to ensure design and program decisions align with certification and operational approval outcomes.Standards, Policy & Global Engagement:, • Represent Skyways in international standards bodies and working groups, influencing emerging UAS standards and policy to enable future operations and market access., • Translate evolving regulatory and standards landscapes into clear technical direction for internal teams and customers., • Design and lead regulator and ANSP demonstration programs to validate operational concepts using real-world data, including advanced and non-traditional operations, • .Author regulatory research proposals and synthesize flight test results into actionable design, safety, and policy recommendations.Performance & Safety Integration:, • Define system-level performance envelopes across normal, degraded, and contingency conditions in collaboration with engineering and safety teams., • Integrate system safety analyses, assumptions, and metrics into certification strategies, operational limitations, and approval packages., • Guide test planning, metrics, and validation methods to support regulatory acceptance and scalable operations.What You’ll Bring:, • Demonstrated experience leading complex aviation or UAS certification programs, including engagement with civil aviation authorities at a senior technical level., • Ability to operate effectively in regulatory ambiguity and shape certification strategies where precedent is limited or evolving., • Proven skill translating between policy, safety, and detailed technical domains without loss of intent or rigor., • A strategic mindset that views regulation as a tool to enable safe, scalable, and commercially viable operations.Bonus Points: Due to U.S. government contract requirements, this role is limited to U.S. citizens, U.S. permanent residents, or candidates from specific countries authorized under applicable export control regulations. Skyways is an Equal Opportunity employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, national origin, sex, sexual orientation, gender identity, disability, protected veteran status or any other factor protected by applicable local, state or federal laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Vestwell is the financial technology company powering the new savings economy. The New York City-based fintech platform redefines how people save for the critical aspects of life across retirement, education, and healthcare savings needs. Today, Vestwell enables over 350,000 businesses and nearly 1.5 Million active savers, with over $30 billion in assets saved across all 50 United States. Vestwell offers a range of products, including workplace-delivered retirement plans, employer-offered student loan repayment benefits, and various savings accounts for education, emergencies, and individuals with disabilities. Vestwell's platform serves a diverse clientele, including financial advisers, employers, third-party administrators, financial institutions, payroll providers, government agencies, and individual savers. To learn more, visit vestwell.com Who Are We Looking For? Vestwell is expanding and we're excited to onboard a Director of Enterprise Relationship Management to our team, supporting our strategic and enterprise partnerships. At a high level, we're looking for someone who is client-focused, pays attention to detail, has great communication and problem solving skills, can successfully juggle multiple priorities at once, and is a confident self-starter. What Will You Be Doing? Vestwell's Enterprise Relationship Management team plays a key role in supporting Sales in securing new partnerships, driving ongoing partnership revenue growth, and ensuring continued partnership success and retention throughout the partnership lifecycle. You will support new and existing partners from implementation to custom product development and ongoing support. This role requires ownership and accountability for relationship management and program/project management. Day-to-Day You May Also Be Expected To: • Own the success of the strategic partnerships in your remit, from both the revenue generation and retention perspectives., • Follow up with all enterprise partners and national accounts with which Vestwell has a preferred or exclusive provider, referral fee, national account, or similar agreement to confirm that they are satisfying and exceeding all plan and revenue commitments and all other commitments included in their contracts with Vestwell. Make sure Vestwell is prominently featured on their website, new client onboarding workflow, webinars and live events, and marketing collateral., • Diligently and proactively contact all accounts in contract with Vestwell to identify and implement ways to expand our business relationship and revenue opportunities., • Cross-functionally collaborate to ensure partners are efficiently and effectively onboarded within Vestwell, enabling revenue recognition as expediently as possible., • Collaborate with the team to ensure implementation and ongoing partnership strategies are optimized to enable Vestwell to achieve its Enterprise goals., • Support the timely and successful delivery of our solutions according to our partners' needs and objectives., • Coordinate across multiple internal teams to ensure compliance with enterprise partner Service Level Agreements., • Collaborate cross functionally with sales, operations, product, marketing, legal & compliance, and other teams to drive the team's projects and initiatives., • Drive business requirements, scope, and resource alignment for partner specific initiatives, including project plan, workstreams, and timelines., • Own successful delivery of partner specific initiatives, ensuring objectives are met, risks mitigated, and expected outcomes are achieved. Requirements The Necessities • 7+ years experience in client-facing Retirement, Wealth Management, Client Success, roles at a Financial Services SaaS company., • Self starter requiring minimal direction, with a "get it done" mindset., • Strong critical thinker, able to prioritize and problem solve effectively., • Excellent project management and organizational skills., • Excellent written and verbal communication skills., • An entrepreneurial spirit that allows you to be nimble and adapt to changing company needs, pivoting into new initiatives with ease., • Strategic and outside of the box thinker., • Proven success working with senior management, both internally and externally., • Proficiency in Asana, Excel, Powerpoint, as well as Google Workspace equivalents., • Ability to identify and implement solutions for process improvement., • Ability to work independently and manage workload to achieve desired goals. This role will be based in Vestwell's New York, Austin, King of Prussia, or Scottsdale office, and will be part of Vestwell's hybrid in-office operation. The expected base salary range for this position is a minimum of $120K - $135K, plus performance based bonus. This position is eligible to receive new hire equity in the Company. Please note that salary bands are based on NY and other similar metro areas and may differ based on where the role is ultimately hired. OUR BENEFITS We're an innovative, high-growth company, with lots of exciting milestones ahead. We value health and wellness at Vestwell and in addition to a dedicated Employee Wellbeing Committee, we offer competitive health coverage and generous vacation offering. We have adopted a hybrid office policy, but all employees are welcome at our bright, comfortable office with many workspace options in our Midtown Manhattan, Austin, King of Prussia, and Phoenix offices, so everyone has a setting that is the most productive for them. Oh, and naturally we have a great 401(k) plan! OUR PROCESS It starts the same for every candidate: getting to know the team members through 1-2 conversations about Vestwell, your experience, and your interests. Next steps can vary by role, but the usual next steps are a skill or experience screen (e.g. a coding interview for an Engineer, a portfolio review for a Designer, deeper experience call for other roles) which leads to a virtual or in-person interview panel after that if the screens go well. Before making an offer, our interview process concludes with a references check stage for your recruiter to meet with a current or former supervisor and peer. We prioritize transparency and lack of surprise throughout the process. For your awareness you will only receive correspondence from any other domain not ending in Vestwell.com is not our Recruitment team. Vestwell's Privacy Policy. Attention California residents: In the course of conducting our business and complying with federal, state, and local government regulations governing such matters as employment, tax, insurance, etc., we must collect Personal Information from you. Should you accept employment with Vestwell you may view our California Privacy Rights Act here: Vestwell's California Privacy Rights Policy.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal RF Test Engineer I to our team. If you enjoy working in a startup environment and are passionate about developing critical test systems for leading-edge satellite, spacecraft, and aerospace communication systems, we would like to hear from you. In this position, you are responsible for the design, analysis, and implementation of engineering test plans and procedures. The ideal candidate possesses a strong combination of hardware and software knowledge with proficiencies in RF measurements, test equipment (VSAs, VSGs, VNAs, etc.), test architectures, and automation. The successful candidate will work closely with multi-disciplinary teams to address company-wide hardware test needs. Experience with phased array testing is preferred. Core day-to-day responsibilities include collaborating with design and test engineering teams to develop test requirements, mapping requirements to reusable test architectures and procedures, implementing test plans and procedures, and logging and presenting results to key stakeholders. Additional responsibilities include lab and equipment management and guiding key equipment purchase decisions. Principal-level test engineers are distinguished by an ability to architect RF test systems, to draw insightful conclusions from test results, and to participate in “design for test” planning and review from the early stages of RF product development. Test engineers are core members of the Cesium technical team. The successful candidate will present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) or higher degree in Electrical Engineering or Computer Engineering from an accredited university or institution., • Minimum of 9 years of industry or university research experience in design, analysis, and implementation of RF test systems., • High proficiency with RF measurements (Linearity, NSD, EVM, etc.)., • Test architecture design and development including scripting, test executives, hardware, and measurement abstraction layers., • Proficient in performing conducted RF measurements including S-parameters, AM/PM, compression, noise figure, harmonics/spurious emission, phase noise, switching speed, bit error rate, adjacent channel power, and group delay., • Hands-on experience with lab instruments such as digital oscilloscopes, multimeters, electronic loads, source measurement units, RF signal generators, spectrum analyzers, network analyzers, and vector signal analyzers., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Familiarity or hands-on experience with phased array over the air range testing, including phase/amplitude calibration, EIRP, G/T, axial ratio, scan loss and pattern cuts., • Programming or scripting experience (Python, MATLAB, C/C++, etc.)

Job Description At TerraFirma, we’re redefining how the world moves earth for construction. Founded by former SpaceX engineers and backed by Bain Capital Ventures, TerraFirma is automating construction to make it faster, cheaper, and safer. Our Story & Mission At SpaceX, we were part of the teams that built the largest rocket in human history, launched the largest constellation of satellites ever made, and delivered connectivity to millions of people worldwide. What we learned was simple: infrastructure is everything. At Starbase, the biggest barrier to launching missions to Mars was not building the rocket. It was how slow, expensive, and complex it was to build the infrastructure around it. We lacked buildings, roads, water, power, communications, and waste management, and constructing them took far more time and resources than it should have. From a first-principles perspective, that doesn't make sense. It shouldn't be this hard or costly to create the foundations for progress. That’s when we realized something important: the same engineering mindset that enabled us to tackle space exploration and mass manufacturing could be applied to infrastructure. By bringing the principles of simplification, iteration, acceleration, and automation to construction, we can unlock a new era in how the world builds. Accelerating infrastructure unlocks progress across every domain, creating a self-sustaining engine for tackling humanity’s toughest challenges. The innovations we develop on Earth will lay the groundwork for the technologies that one day make settlement on Mars possible. Job Overview Lead a major U.S. Government program delivering remote-controlled heavy equipment for high-impact construction and remediation missions around the world. You will lead global deployments and field execution, scaling a proven teleoperation capability into reliable operations across real-world sites. Responsibilities * Own end-to-end program execution for a major U.S. Government contract, including scope, schedule, budget, compliance, and performance * Lead global field deployment for remote-controlled heavy equipment operations, including staffing, equipment staging, logistics, maintenance, and day-to-day operations across international sites * Serve as primary interface to U.S. Government stakeholders and partners and translate requirements into executable plans, milestones, and operational rhythms * Drive safety and risk management in hazardous environments and enforce a strong safety culture across all field activities * Build and lead multidisciplinary teams including operators, field engineers, technicians, and subcontractors with clear accountability and high execution standards * Own reporting cadence and performance tracking and drive continuous improvement based on lessons learned and government feedback Qualifications & Requirements * 10+ years of experience leading large-scale construction, remediation, disaster relief, or heavy civil operations * Experience managing U.S. Government overseas construction or contingency operations such as DoW, USACE, DOS, USAID, or similar agencies * Bachelor’s degree in engineering, construction management, or related field * Ability to obtain and maintain a U.S. security clearance * Willing and able to spend significant time in Austin, TX (TerraFirma HQ) and travel internationally as needed, including extended in-country deployments Compensation & Benefits Base compensation will vary based on factors such as relevant experience, demonstrated skills, and the scope of responsibilities for the role. Salaries and leveling will be determined on a case-by-case basis if an offer is extended. This position includes a competitive benefits package, which may include medical, dental, and vision coverage, paid time off, and company holidays. Travel required for the role will be supported in accordance with company policy.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. In this role, a systems engineer is responsible for utilizing commercial modeling and simulation tools to synthesize conceptual aerospace and defense systems into executable digital models to aid multi-disciplined design teams in quickly and accurately evaluating expected performance against design requirements. This candidate will be expected to build expertise across commercial digital modeling and simulation tools, in particular leveraging Ansys STK (System Tool Kit) software which delivers a physics-based, mission-centric digital design and test environment for analyzing and designing systems across various domains like space, air, sea, and ground missions. This candidate will be expected to continually expand and build their knowledge and use of this systems modeling and simulation environment while also incorporating external simulation artifacts from other multi-physics modeling and simulation tools commonly utilized by domain-centric design engineering groups such a CFD tools, mechanical CAD solutions, RF systems design and test tools, optics, and many other engineering discipline focus areas. It will be critically important for this candidate to be able to communicate with colleagues across multi-disciplines and help incorporate their designs, analysis results, and model anticipated system behaviors through a fully integrated digital simulation approach. Familiarity with Model Based Systems Engineering (MBSE) practices is highly desired.JOB DUTIES AND RESPONSIBILITIES • Effectively leverage a digital modeling and simulation ecosystem of tools to support the design, test, validation and verification needs of internal project team leaders., • Proactively identify workflow automations to help establish streamlined processes for repeatable modeling and simulation chains for efficient re-use of established our organization's unique mod/sim techniques., • Support briefings to design team leaders to demonstrate/share results during design review milestones., • Proactively investigate interoperability across existing design tools that our engineering organization leverages, and suggest/lead identified improvements to help establish and build our end-to-end digital engineering toolchains., • Working closely with development and engineering design teams to inject digital modeling and simulation tools into their workflows in non-disruptive ways by helping to lead data pipeline integrations, automations, and routines that increase overall efficiency and shorten design lifecycles., • Collaborating with software developers, DevOps, and infrastructure teams to ensure application stability and performance.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • A minimum of 2 years of experience with a bachelor's degree in aerospace engineering, or a related field is required., • Demonstrable experience or familiarity with digital systems engineering methodologies., • Familiarity with STK and its modules (e.g., Astrogator, SOLIS, TETK) for digital mission engineering is critical., • Knowledge of various operating systems, devices, and software applications is expected., • Proficiency with common engineering scripting languages (MATLAB, Python, Javascript, and similar)., • Familiarity (or ability to gain necessary skills) with general engineering design tools commonly used across disciplines such as Fluids, Electronics, Thermal, Optics, and Mechanical tools such as the Ansys tool suites., • Experience with Model Based Systems Engineering practices and languages (SysML), • Proficiency in functional digital systems engineering and understanding of design, test, review methodologies., • Experience with test case design and execution, as well as defect tracking and reporting tools., • Strong understanding of product design/test workflows in a commercial production environment, • Excellent analytical and problem-solving skills to interpret technical data and information, and resolve complex issues., • Ability to perform root cause analysis and develop effective solutions., • Exceptional written and verbal communication skills are essential for interacting with customers, development teams, and other stakeholders., • Strong teamwork and collaboration skills to work effectively with diverse teams., • Customer-focused mindset and commitment to customer satisfaction., • Organizational skills to manage workload, prioritize tasks, and keep track of documentation and records., • Ability to manage simulation and process data management holistically and document configuration changes.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior FPGA Engineer II to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for FPGA circuits and systems through all phases of the development process. The ideal candidate will have experience in FPGA design, verification, test, and deployment at the HDL level. FPGA HDL designs will include high-speed serial interfaces and data streams, digital processing cores, multiple clocks and clock domains, and management interfaces. Testing, validation, and verification will also be central tasks for any FPGA design. Experience in digital signal processing or board-level hardware design is also desirable. The successful candidate will present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering or Computer Engineering from an accredited university or institution., • Minimum of 6 years of industry or university research experience in the design, analysis, and implementation of FPGA systems at the HDL level., • Expertise in FPGA design and verification (Verilog/VHDL, HDL coder, Xilinx’s Vivado, Modelsim, etc.)., • Hands-on experience with lab instruments such as digital oscilloscopes, spectrum analyzers, RF signal generators, and vector signal analyzers., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Aerospace design and qualification., • Worst-case analysis, failure method and criticality analyses, and reliability analysis., • Experience with board-level hardware design.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a meticulous and detail-oriented Production Planner to join our dynamic team. As a Production Planner, you will play a crucial role in optimizing the production scheduling processes for an aerospace manufacturing facility. You will work closely with cross-functional teams to champion value add scheduling practices that mirror reality to identify symbiotic relationships, capacity constraints and critical path deliverables for manufacturing and supply chain. The basic function of the Production Planner is to ensure all material is available and on time in accordance with the master production schedule.JOB DUTIES AND RESPONSIBILITIES • Develop and maintain floor production schedules for space-related projects, taking into account resource availability, project timelines, and customer requirements., • Review material shortages, stock outages, and safety stock levels while working with Purchasing and Manufacturing to meet customer requirements. Propose changes when needed., • Monitor production progress and proactively address any deviations from the schedule, ensuring on-time delivery of deliverables., • Coordinates and expedites the flow of materials within internal work centers., • Develops work statements and sequencing of data driven supply chain processes through collaboration and partnership with internal business shareholders., • Reviews, maintains, and monitors ERP production data integrity to continuously improve product delivery., • Develop a tool and process to identify and manage production capacity slots which are allocated to program management requirements, support delivery to milestones and inform impact to delivery dates where the production demand changes., • Be the subject-matter-expert for cross-functional stakeholders determining Capacity based make vs. buy, forward scheduling and lead times analysis., • Prepare reports and presentations to communicate production status, performance metrics, and recommendations for improvement to senior management.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Minimum of 5 or more years of experience in engineering/manufacturing environment., • Bachelor's degree in engineering, supply chain management, or related field., • Proven experience in production planning or manufacturing operations, preferably in the aerospace/space/automotive industry., • Strong analytical skills with the ability to interpret data, identify trends, and make data-driven decisions., • Proficiency in production planning software and tools (e.g., ERP, MES…etc)., • Experience with Smartsheet, Microsoft Project and development of a Master Production Schedule, • Excellent communication and interpersonal skills, with the ability to effectively collaborate with cross-functional teams., • Detail-oriented mindset with a focus on accuracy and precision in planning and execution.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Electronics Test Engineer II to our team. If you are excited about working in a startup environment and are passionate about developing critical test systems for leading-edge satellite, spacecraft, and aerospace communication systems, we would like to hear from you. Senior Electronics Test Engineer II engineers are core members of the Cesium technical team. As a member of our Test Engineering, you are responsible for the design, analysis, and implementation of engineering test plans and procedures for board-level electronics products, including power, digital, and RF electronics. The ideal candidate possesses a strong combination of hardware and software knowledge with proficiencies in measurement techniques, test equipment, test architectures, automation, and integrated system testing. The successful candidate will work closely with multi-disciplinary teams to address company-wide test needs. This role will be responsible for software products necessary throughout all phases of test and integration. Key projects will include developing and managing software for interfacing with flight hardware and test equipment in an abstract and flexible manner that can be quickly implemented into a variety of test campaigns, developing methods to store and access generated data, and equipping the test team with other software tools necessary to efficiently accomplish ambitious testing goals. Additionally, designing test solutions for flight hardware optimizing for reliability and efficiency, and developing modular, reusable test and automation software in Python (or similar languages) implemented in a variety of test applications to verify design and build quality. A Senior Test Engineer II is distinguished by an ability to architect test systems, to draw insightful conclusions from test results, and to participate in “design for test” planning and review from the early stages of product development. The successful candidate will present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required. JOB DUTIES AND RESPONSIBILITIES • Developing test architectures and test systems, including equipment selection, test fixtures, data logging methodology, and interfaces., • Designing and executing tests at the prototype, qualification, and acceptance stages., • Developing test requirements for new products., • Designing tests for compliance with standards, such as NASA GEVS (GSFC-STD-7000)., • Planning and executing board-level verification tests, such as high-speed signal integrity, digital link characterization, power supply performance, and performance over temperature., • Designing and developing systems for testing complex integrated hardware and software, such as phased array products that combine radios, computers, and phased array antennas., • Advising design engineering team on design-for-testability (DFT)., • Evaluating and documenting test results, presenting them to key stakeholders., • Contributing to the continuous improvement of in-house tools, such as test software and documentation templates., • Training technicians and operators to perform tests., • Contributing to lab buildout and lab management. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • A Bachelor of Science (BS) or higher degree in Electrical Engineering or similar from an accredited university., • A minimum of 6 years of industry or university research experience in design, analysis, and implementation of electronic products and/or test systems., • Experience designing and executing test plans for custom board-level electronics., • Hands-on experience with lab instruments such as digital oscilloscopes, spectrum analyzers, RF signal generators, and vector signal analyzers., • Programming or scripting experience, such as Python, LabVIEW, SQL, MATLAB, or Embedded C., • Excellent written and verbal communication skills. PREFERRED EXPERIENCE, • Experience working in a version-controlled environment (Git or SVN)., • Knowledge of Windows and Linux operating systems, VLANs, and network security., • Experience developing graphical user interfaces for a production environment., • Extensive knowledge of a range of digital and analog interfaces including GPIB, USB, VISA, TCP/IP, VLAN, CAN bus, SPI, I2C, and analog-to-digital conversion.

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup, founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced engineers. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders' successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop will have a real-world impact. Position Overview We are seeking a Buyer III responsible for sourcing, procurement, and supplier management of electrical components, including PCBAs, connectors, wire harness components, and complete wire harness assemblies, to support the production and delivery of autonomous turret systems for the DoD. This role will focus on managing complex electrical supply chains, ensuring technical compliance, and driving cost, quality, and delivery performance. A key aspect of this role is strategically scaling the supply chain to align with aggressive production ramp goals—ensuring suppliers, capacity, and material strategies are established early to support transition from development into full-rate production. You will work closely with engineering and manufacturing teams to enable a smooth and predictable scale-up. This position offers a unique opportunity to contribute to cutting-edge technology and strengthen national defense capabilities. What You’ll Do: * Supplier Management: Build and maintain strong relationships with suppliers of PCBAs, connectors, cables, and wire harness assemblies. Ensure suppliers meet quality, cost, and delivery expectations, including adherence to IPC/WHMA standards where applicable. Monitor supplier performance and drive corrective actions as needed * Sourcing: Identify, evaluate, and qualify suppliers for electrical components and assemblies, with a focus on technical capability, scalability, and reliability. Continuously develop a resilient and diversified supply base that can support both prototype and high-volume production needs * Technical Procurement: Partner closely with engineering to understand drawings, BOMs, specifications, and revision changes for PCBAs and harness assemblies. Ensure suppliers fully understand technical requirements, including testing, traceability, and configuration control * Strategic Scaling: Develop and execute sourcing strategies that proactively align supplier capacity, lead times, and inventory positioning with forecasted production ramps. Establish long-term supplier partnerships, capacity agreements, and dual-sourcing strategies to support rate increases and mitigate bottlenecks * Negotiation: Lead negotiations on pricing, lead times, minimum order quantities, and long-term agreements for electrical components and assemblies. Balance cost targets with quality and supply continuity, especially in the context of scaling volumes * Cost Analysis: Conduct detailed cost analysis for PCBAs and harnesses, including should-cost modeling (labor, components, test, yield). Identify opportunities for cost reduction through design feedback, alternate sourcing, and volume leverage * Risk Management: Identify and mitigate supply chain risks specific to electronics (e.g., component obsolescence, long lead-time semiconductors, single-source connectors). Develop strategies such as alternate parts, last-time buys, and buffer stock to ensure uninterrupted production * Compliance: Ensure procurement activities comply with applicable government regulations (FAR/DFAR), as well as industry standards such as IPC-A-610, IPC/WHMA-A-620, and ITAR where applicable * Collaboration: Work cross-functionally with engineering, manufacturing, quality, and planning teams to support NPI builds, production ramp, and ongoing delivery commitments. Act as the primary supply chain interface for electrical assemblies * Continuous Improvement: Drive improvements in sourcing strategies, supplier performance, and internal procurement processes. Support initiatives such as supplier consolidation, lead-time reduction, and scalability of procurement operations What You Need: * Bachelor’s degree in Supply Chain Management, Business, Engineering, or a related field, or equivalent work experience * 5+ years of experience in procurement and supplier management, specifically with electrical components such as PCBAs, connectors, cables, and wire harness assemblies * Proven experience supporting production ramp and scaling supply chains from prototype to higher-rate manufacturing * Strong understanding of electrical drawings, BOM structures, and configuration control * Experience working with contract manufacturers (CMs) and electronics suppliers * Strong negotiation, communication, and problem-solving skills * Familiarity with government procurement regulations (e.g., FAR, DFAR) and industry standards (e.g., IPC-A-610, IPC/WHMA-A-620) is a plus * Experience managing component lifecycle risks (e.g., obsolescence, allocation, long lead items) * Proficiency in ERP/MRP systems and procurement tools Physical Demands: * Occasional standing and walking within the office. * Manual dexterity to operate a computer keyboard, mouse, and other office equipment. * Visual acuity to read screens, documents, and reports. * Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies. * Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages). What We Offer: * Competitive salary * ACS Equity Package * Health, Dental, and Vision Insurance * Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #LI-AS1 #ZR

Job Description Senior Accountant/Accounting Manager Work from Home within the Continental United States About Us: @Orchard LLC is a WOSB mission-driven professional services firm supporting federal and commercial clients across scientific, environmental, and technical domains. We support our customers while building a lean, entrepreneurial business. We’re looking for a hands-on Senior Accountant/Accounting Manager to own our accounting, finance, and compliance functions. About the Role: This position is a hands-on, one-person accounting function designed to bridge the gap between transactional data and executive decision-making. The primary objective is to transform the existing accounting foundation into a source of reliable financial intelligence. This individual will personally manage the full spectrum of accounting & financial operations, from ensuring the accuracy of initial coding to delivering high-level strategic projections. You’ll be the cornerstone of our back office - working directly in QuickBooks, Paylocity, and Beebole to process transactions, close the books, manage cash, and ensure compliance with government contracting requirements. You’ll also maintain our profiles in government systems (SAM.gov, IPP, etc.), manage insurance programs, and keep our records audit-ready. Responsibilities: • Own all day-to-day accounting functions, ensuring precision in a lean, small-business environment., • Standardize the month-end close and re-engineer accounting process architectures to ensure data integrity and scalable workflows., • Engineer advanced management reporting packages, including granular cost visibility, task order, and customer P&Ls, cash flow forecasting, and annual budgeting., • Manage full-lifecycle GovCon accounting, specifically complex task-order setups, compliant billing cycles, and DCAA reporting., • Manage company profiles in SAM.gov, IPP, and other government systems., • Keep all financial, insurance, and compliance records organized, backed up, and audit-ready., • Maintain compliance with DCAA, FAR/DFARS, indirect rates, and contract billing., • Oversee insurance renewals and risk management. Requirements: • Bachelor’s degree in Accounting, Finance, or a related field., • CPA, CMA, or comparable professional certification/license is strongly preferred., • 5-10 years of hands-on accounting experience, including a proven track record of owning the accounting function for a small business, • Strong reporting skills with the ability to build complex reconciliations and custom reports outside of standard accounting software., • Advanced proficiency in MS Excel, QuickBooks, and Paylocity; experience with integrated timekeeping systems is required., • Comfortable working in a small, entrepreneurial business where you will own the work, not just manage it., • Preference: Significant experience in government contracting (familiarity with DCAA, FAR/DFARS, indirect rate, and billing) is a major plus. Why Join Us? If you want to be the key accounting, finance, and compliance leader in a small business where your work has an immediate impact, this is the role. You’ll own the systems, re-architect the processes, and ensure the company is always financially sound and audit-ready. Compensation: The base salary is dependent on qualifications and experience and is expected to be in the range of $80,000-$90,000 annually. Benefits are provided, including PTO, health, dental, and vision. @Orchard LLC is an equal opportunity employer. We encourage all qualified candidates to apply, regardless of race, gender, age, disability, or other protected characteristics.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Staff Accountant to our team. If you enjoy working in a startup environment and are passionate about making an impact in a growing company, we would like to hear from you. The Senior Staff Accountant is responsible for supporting the Company’s month-end close, account reconciliation processes, and financial reporting in a public company environment. This role ensures the accuracy, completeness, and integrity of financial data in compliance with U.S. GAAP and internal controls, within the aerospace and defense regulatory environment. JOB DUTIES AND RESPONSIBILITIES • Perform revenue accounting under ASC 606 and inventory accounting processes., • Execute and support month-end, quarter-end, and year-end close activities., • Prepare and post journal entries, including accruals, prepaids, and reclassifications., • Ensure timely and accurate completion of close activities in accordance with reporting deadlines., • Analyze financial results and investigate variances., • Prepare and review balance sheet account reconciliations (cash, inventory, prepaid expenses, accruals, fixed assets, intercompany, etc.)., • Ensure reconciliations are completed accurately in a timely manner with appropriate supporting documentation., • Identify and resolve discrepancies and aged reconciling items., • Maintain reconciliation schedules and support continuous improvement of reconciliation processes., • Support external audits and quarterly reviews, including preparation of audit schedules and documentation., • Assist with SOX compliance, including control execution, documentation, and testing support., • Ensure adherence to internal accounting policies and procedures., • Maintain strong documentation to support audit readiness., • Partner with FP&A and other cross-functional teams to ensure accurate financial reporting., • Support accounting for operational activities including inventory, cost accounting, and project/program-related transactions., • Assist in the implementation and improvement of accounting systems and processes.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in Accounting, Finance, or related field required., • Minimum of 5-8 years of progressive accounting experience, including month-end close and account reconciliation responsibilities., • Strong knowledge of U.S. GAAP and general accounting principles., • Understanding of ASC 606 and long-term contract accounting a plus., • Experience with month-end close and account reconciliation processes., • Familiarity with public company reporting and SEC requirements., • Advanced proficiency with Microsoft Excel; working knowledge of Word and PowerPoint., • Experience with enterprise ERP systems (e.g., NetSuite, Oracle, SAP, or equivalent)., • Ability to work with financial reporting and data analysis tools.PREFERRED EXPERIENCE, • Experience in aerospace, defense, manufacturing, or regulated environments., • CPA, or equivalent advanced certification a plus., • Experience in a public company or IPO-ready environment., • Public accounting experience (Big 4 or national firm)., • Experience with account reconciliation tools (e.g., FloQast or similar).

Job Description Company Overview Allen Control Systems (ACS) is a cutting-edge defense startup founded by two former Navy electrical engineers with a proven track record in robotics and software. We are developing a small, autonomous gun turret that employs advanced computer vision and control systems to precisely target and neutralize small drones and loitering munitions. Our innovative approach requires overcoming significant technical challenges, making this an exciting and dynamic environment for experienced professionals. With an engineering-first culture, ACS values technical excellence and innovation. Backed by our founders’ successful exits from two previous ventures acquired for a combined $180M in 2022, we are committed to ensuring that the groundbreaking technologies we develop have a real-world impact. Position Overview: We are seeking an experienced Technical Writer to develop, organize, and maintain comprehensive technical documentation for ACS’s autonomous counter-drone system. This role requires a strong ability to translate complex engineering concepts across robotics, computer vision, and embedded control systems into clear, accurate, and compliant publications that support operators, field users, and government customers. What You’ll Do: * Work directly with ACS engineers and founders to gather and document technical information on the autonomous turret platform, including computer vision systems, control systems, robotics hardware, and embedded software. * Create and maintain operator manuals, user guides, system integration documents, maintenance procedures, and safety documentation for ACS’s counter-drone system. * Develop government-facing technical deliverables compliant with applicable DoD and MIL-SPEC standards (e.g., MIL-STD-40051, S1000D, or applicable Technical Orders). * Collaborate with mechanical and electrical engineers to document hardware assembly, wiring, and maintenance procedures for the autonomous turret platform. * Support proposal efforts and contract deliverables by producing technical narratives, SOWs, and program documentation for government customers. * Manage document version control and maintain consistency across all publication types as the ACS product evolves rapidly. * Prepare and submit documentation deliverables to government agencies and program offices, ensuring compliance with contractual requirements and review timelines. What You’ll Need: * 3-7 years of experience in technical writing, with at least some focus on defense, aerospace, robotics, or hardware systems. * Start-up exposure: comfortable working in a fast-moving environment with limited process and high autonomy. * Familiarity with DoD documentation standards, ITAR compliance requirements, and MIL-SPEC writing guidelines (e.g., MIL-STD-40051, S1000D). * Experience managing technical illustrations, system diagrams, and schematics within documentation for complex hardware or electromechanical systems. * Proficiency in documentation tools (Adobe FrameMaker, MS Office Suite, Confluence, XML editors). * Excellent attention to detail, organizational skills, and ability to manage multiple deliverables in a fast-paced environment. What We Offer * Competitive salary * Health, Dental, Vision Insurance * Paid Time Off Allen Control Systems is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment. Allen Control Systems prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #LI-AS1

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior RF Engineer II to our team. The ideal candidate has experience in board-level RF electronics design. If you enjoy working in a startup environment and are passionate about developing leading-edge RF hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for RF circuits and systems through all phases of the development process. The ideal candidate will be proficient in board-level schematic design and PCB layout of RF circuits, and system-level communications concepts such as link budgets and modulation schemes. The work will include many aspects of phased array communication systems, including RF front-ends, frequency converters and synthesizers, filters, beamformers, power dividers, and phased array antennas. As a Cesium hardware team member, you will be responsible for RF hardware designs from initial concept through requirements definition, part selection, detailed design, analysis, manufacturing, testing, qualification, and in-orbit support of Cesium's products. Hardware design tasks will include block diagrams, detailed schematics, PCB layout and routing, simulations, and test design. The successful candidate will also present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • A Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering (EE) from an accredited university or institution., • 6+ years of industry experience in design and analysis of RF electronics design, analysis, test, and troubleshooting., • Experience with professional simulation tools such as CST and ADS, as well as EDA tools such Altium., • Hands-on experience with lab instruments such as vector network analyzers, spectrum analyzers, signal generators, and oscilloscopes., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Experience with MATLAB or other programming languages., • Experience in aerospace electronics design, development, and qualification., • Knowledge of worst-case circuit analysis, failure method and criticality analyses, and reliability analysis., • Experience with antenna design.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Principal Power Electronics Engineer I to join our growing satellite communication (SATCOM) terminal development team. In this position, you will contribute across the entire development lifecycle of next-generation power electronics hardware for military and commercial power systems—from leading the definition of power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support. JOB DUTIES AND RESPONSIBILITIES • Lead the development of power system architectures and derive power subsystem requirements, • Design DC-DC power converters, power supplies, and power distribution systems ranging from a few watts to more than 20 kW of power in the 0.8 V to 400 V range, • Design single-phase and three-phase AC-DC power supplies and power distribution systems ranging from a few kilowatts to more than 20 kW, • Perform comprehensive analysis of AC-DC and DC-DC power supplies including worst-case circuit analysis (WCA), stress analysis, small signal modeling analysis, failure modes and effects analysis (FMEA), reliability analysis, and power integrity analysis, • Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supplies, • Lead board bring-up and design verification testing of analog and power electronics circuits, • Lead system integration, qualification campaigns, and production release of power supply modules and power systems, • Mentor younger engineers and foster knowledge sharing, • Lead a small team of power electronics engineers to drive project execution JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 9 years of experience designing analog and power electronics, • Experience working with electrical power systems and subsystems, including developing power architecture and power requirements, performing trade studies for size, weight, power, and cost optimization (SWAP-C), selecting power converter topologies, and defining power management and control blocks, • Experience designing, testing and qualifying single-phase and three-phase off-line AC-DC power supplies, and DC-DC power supplies for industrial, airborne, or military systems, • Knowledge of control theory and stability of power electronics, including experience characterizing control loops and impedances in the laboratory, • Experience designing power filters for low noise outputs and for power line electromagnetic compatibility (EMC), • Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans, • Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies, • Extensive hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators, • Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx, • Experience with isolation and grounding, failure mode effects analysis and fault tolerant design, and thermal management of power electronics, • Experience designing and testing power electronics units to meet industry standards and requirements in the automotive, industrial, aircraft, or military markets (e.g., FCC, CISPR, UL safety standards, ECSS, NASA, MIL standards), • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • Experience designing and testing isolated and non-isolated DC-DC power converters (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback, Forward), • Experience designing or specifying custom power magnetics for power supplies and power line filters, • Knowledge of power stage design and control methods for power factor correction (PFC) converters and active rectifiers, • Experience generating statements of work and requirements for external vendors, vendor selection, and vendor management for power supply and power system rack developments, • Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition, • Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx, • Knowledge of soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.)

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior PCB Designer II (RF) to our team. If you are excited about working in a startup environment, have a strong work ethic, and are passionate about cutting-edge electronics, we would like to hear from you. In this position, you will perform PCB layout and library management for state-of-the-art power, digital, and RF electronics for aerospace applications. Electronics design is a core part of the company’s business, and as such, these functions are critical. You will have the opportunity to work with and learn from a highly talented team with state-of-the-art tools. As a small company, the Cesium team “wears many hats.” Candidates should be comfortable with a varied workflow that may involve multitasking between PCB layout, library management, schematic capture, review, and other related tasks.JOB DUTIES AND RESPONSIBILITIES • Perform complex RF and mixed-signal PCB layout in Altium Designer, working closely with engineers on staff., • Own intricate and challenging PCB layouts that often feature 30 GHz RF, power, and digital on the same board, with high density and complex stackups., • Generate and revise drawings and release packages for PCBs and assemblies., • Manage and maintain electronic component libraries in Altium Enterprise., • Generate and review schematic symbols and footprints., • Maintain templates for schematics, layouts, bills-of-materials (BOMs), and other documents.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • An Associate degree in Electronics Engineering Technology or similar., • 7 years of experience as a PCB Designer., • Strong experience with Altium Designer., • Strong understanding of the technical principles of PCB layout, with a focus on high-frequency RF. This includes shielding and impedance matching among others., • Experience with high-reliability, aerospace, and/or IPC Class 3 designs., • Experience with advanced PCB manufacturing techniques such as blind vias and microvias., • Strong organizational skills., • An eye for detail and commitment to excellence., • Comfortability with collaboration tools such as MS Teams, Confluence, and Jira., • The ability to work well under deadlines., • Strong digital, written, and spoken communication skills, especially in the context of working with hardware engineers and mechanical engineers to complete a layout.PREFERRED EXPERIENCE, • Experience managing an electronic component library.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a highly driven Senior Project Engineer I to lead the planning and execution of test milestones for our space product portfolio. In this role, you will create and maintain integrated program timelines across multiple product lines, ensuring alignment and proactively identifying conflicts. You will oversee the management of test vendors and deliverables, including test station deployments, fixture procurement, harness fabrication, and other critical hardware. This position will also own the tracking and communication of project risks and underlying assumptions, clearly articulating their impact to stakeholders and driving informed decision-making within the team. This is a pivotal role for ensuring our test capabilities are delivered on time, on budget, and to the highest standards of performance for our space systems. The Senior Project Engineer is accountable for driving schedule alignment, vendor deliverables, and cross-team coordination to ensure test milestones are met across all space product lines. While this role is responsible for verifying that test planning, data analysis, and problem resolution activities are completed on time and to quality standards, the technical depth and engineering authority for these activities remains with the assigned subject matter experts and test engineers. The Senior Project Engineer is empowered to challenge assumptions, escalate risks, and ensure clarity in decision-making, but does not serve as the primary technical owner for test methods, data, or design quality.JOB DUTIES AND RESPONSIBILITIES • Serve as the primary point of contact for assigned test projects, ensuring alignment between engineering, manufacturing, quality, and test operations teams., • Develop and maintain project schedules, resource plans, and risk assessments for test campaigns., • Ensure engineering requirements are translated into actionable test plans, procedures, and acceptance criteria by the responsible engineering teams, tracking progress and resolving roadblocks., • Coordinate design and fabrication of test fixtures, instrumentation, and support equipment., • Oversee test execution, ensuring adherence to safety protocols, engineering specifications, and regulatory requirements., • Review and validate that test data is analyzed and interpreted appropriately, and that technical reports and presentations are completed and communicated to stakeholders on schedule., • Facilitate and track issue resolution efforts, ensuring root cause analyses, corrective actions, and continuous improvement initiatives are implemented by the owning teams., • Own budgeting, procurement, and vendor coordination for assigned programs. Manage allocated budgets, escalate potential overruns, and lead vendor relationships to ensure timely delivery of test assets.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in Mechanical, Aerospace, Electrical Engineering, or a related field (Master’s degree a plus)., • 4+ years of engineering experience in an aerospace, defense, or high-technology environment, preferably in a test-focused role., • Strong understanding of mechanical, electrical, and/or structural test methods, instrumentation, and data acquisition systems., • Experience with project management tools and methodologies (PMP certification a plus)., • Excellent organizational, communication, and problem-solving skills., • Ability to work in a fast-paced, multidisciplinary environment and manage multiple projects simultaneously., • Familiarity with space industry standards, safety protocols, and regulatory requirements (e.g., NASA GEVS, SMC-S-16, MIL-STD environmental, & EMI/EMC standards).PREFERRED EXPERIENCE, • Experience with environmental test systems (thermal, vibration, shock, vacuum, etc.)., • Knowledge of CAD tools (e.g., SolidWorks, CATIA) for test fixture design., • Knowledge of data analysis in software language like MATLAB, LabVIEW, Python.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior RF Engineer I to our team. The ideal candidate has experience in board-level RF electronics design. If you enjoy working in a startup environment, and are passionate about developing leading-edge RF hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for RF circuits and systems through all phases of the development process. The ideal candidate will be proficient in board-level schematic design and PCB layout of RF circuits, and system-level communications concepts such as link budgets and modulation schemes. The work will include many aspects of phased array communication systems, including RF front-ends, frequency converters and synthesizers, filters, beamformers, power dividers, and phased array antennas. As a Cesium hardware team member, you will be responsible for RF hardware designs from initial concept through requirements definition, part selection, detailed design, analysis, manufacturing, testing, qualification, and in-orbit support of Cesium's products. Hardware design tasks will include block diagrams, detailed schematics, PCB layout and routing, simulations, and test design. The successful candidate will also present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering (EE) from an accredited university or institution., • Minimum of 4 years of industry experience in design and analysis of RF electronics design, analysis, test, and troubleshooting., • Experience with professional simulation tools such as CST and ADS, as well as EDA tools such Altium., • Hands-on experience with lab instruments such as vector network analyzers, spectrum analyzers, signal generators, and oscilloscopes., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • MATLAB or other programming languages., • Aerospace electronics design, development, and qualification., • Worst-case circuit analysis, failure method and criticality analyses, and reliability analysis., • Antenna design.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a CAD Designer I to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this role, you will be responsible for a wide range of CAD design assignments in support of the mechanical engineering team including the creation of models and/or drawings from CAD, sketches, notes, and other documentation provided by engineering staff. You will ensure that design documentation complies with the program requirements, organizational processes and industry standards, and will prepare accurate drawings with proper tolerances, dimensions, and instructions. As a small company, the Cesium team “wears many hats.” Candidates should be comfortable with a varied workflow that may involve multitasking between library management, CAD design, review, and other related tasks.JOB DUTIES AND RESPONSIBILITIES • Provide CAD drawing support (SolidWorks Drawings) throughout the product development process., • Generate and/or modify product’s models, drawings, and documentation., • Identify problems or issues in CAD designs and drawings and provide corrective actions., • Manage and control mechanical digital data files and drawings., • Prepare and incorporate engineering change orders., • Input data and manage hardware structures in a Product Data Management tool (SolidWorks PDM).JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Associates or Technical degree in Computer Aided Design or Engineering related field, • Minimum of 1 year of experience in Computer Aided Design., • Proficiency in using SolidWorks., • Experience generating and/or modifying product models, drawings, and documentation., • Ability to read schematics, assembly drawings, and product specifications., • Comfortable with collaboration tools such as MS Teams, Confluence, and Jira., • Ability to work well under deadlines., • Strong organizational skills., • An eye for detail., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Strong mechanical proficiency and general understanding of manufacturing (CNC, 3D printing, etc.) and mechanical assembly techniques., • Knowledge of applicable government and industry standards including ASME Y14.5 (Geometric Dimensioning and Tolerancing) and ASME Y14.100 (Engineering Drawing Practices), and its application techniques., • Previous experience in supporting the design of electronic packages, ground structures, mechanisms, and/or composite structures.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add an Information Technology (IT) Systems Administrator II to our team. In this position, you will be the face of the IT department for our Colorado office. You will interact with staff of all levels, from onboarding new hires to assisting seasoned engineers. Responsible for IT systems, including hardware management, user support, administration, software licensing, compliance with federal standards, and implementing IT processes and procedures. Daily responsibilities include upgrading and maintaining data management systems, choosing computers and hardware upgrades, setting up new users, maintaining the local servers, and assisting users with IT tasks and issues. The ideal candidate is extremely organized, articulate, flexible, quick to grasp business needs, a team player, an excellent written and oral communicator, and eager to learn.JOB DUTIES AND RESPONSIBILITIES • Build, deploy, and administer Windows and Ubuntu desktops, laptops, servers, and lab systems, including virtual machines., • Support Windows and Linux machines in an Active Directory environment., • Manage network and online file storage., • Respond to issues in a timely manner via our ticketing system., • Maintain hardware, software, and licensing inventory and baselines., • Configure and maintain conferencing A/V setups and digital signage., • Keep documentation up to date., • Identify software and infrastructure needs and suggest solutions.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • 1-3 years of experience in corporate information technology., • Associate degree or formal occupational training or certification required., • Extensive experience with the administration of both Windows and Linux systems., • Good base knowledge of networking., • Strong oral and written communication skills., • Solid troubleshooting and problem-solving skills., • Strong customer service orientation, • Proficiency with Ubuntu, Windows 11, Windows Server 2019 & 2022, VMware ESXi, Microsoft 365, SharePoint, WSL, and Active Directory., • Experience with automated management tools.PREFERRED EXPERIENCE, • Implementing government standards and requirements for IT systems (e.g. NIST 800-171, ITAR/EAR).

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Manufacturing Test Engineer II to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge manufacturing processes for high-reliability, high-volume satellites, we would like to hear from you. In this position, you are responsible for the analysis, and implementation, execution of engineering test plans and procedures. The ideal candidate possesses a strong combination of hardware and software knowledge with proficiencies in test equipment, test architectures, and automation. The successful candidate will work closely with multi-disciplinary teams to address company-wide hardware test needs. Engineers on this team must have working knowledge of overall schematics, operations, manufacturing, testing. Core day-to-day responsibilities include collaborating with engineering teams to lead and develop test requirements, mapping requirements to reusable test architectures and procedures, implementing test plans and procedures, and logging and presenting results to key stakeholders. Additional responsibilities include lab and equipment management and guiding key equipment purchase decisions. Evaluate non-conformances to determine root cause and create actionable items and system improvements.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • A Bachelor of Science (BS) with 2+ years of experience in Mechanical, Electrical, Industrial, or Manufacturing Engineering., • Demonstrated experience in the development and implementation of test systems., • Applied experience in test optimization for manufacturing environments., • Test architecture design and development including scripting, test executives, hardware, and measurement abstraction layers., • Programming or scripting experience (Python or C#)., • Excellent written and verbal communication skills., • Demonstrated engineering intuition, critical thinking, and comfort with ambiguity., • Experience writing test plans, procedures and providing go/no-go judgment and rationale., • Experience in a production environment.PREFERRED EXPERIENCE, • Programming or scripting experience (MATLAB, C/C++, etc.)., • Proficiency with statistics and metrology.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are building, iterating, and getting to space—fast. Our team thrives on action. We leverage deep experience in the space industry with engineering reimagined for speed and agility. We design, test, and deploy real systems that fly. If you want to own critical communications for a satellite mission, keep reading. We’re looking for builders, problem-solvers, and system thinkers. We are seeking a Senior Communication Engineer II to lead the end-to-end integration and verification of communication functions for our communication payload products. This highly technical role combines deep domain expertise in communication systems with hands-on integration and test execution and technical leadership responsibilities. You will play a critical role in the architecture definition, execution, and delivery of our communication payload products leading requirement definitions, contributing to algorithm development, driving Special Test Equipment (STE) design, and owning verification and final sell-off. You will operate with a high degree of autonomy and provide technical leadership across integration and verification activities. JOB DUTIES AND RESPONSIBILITIES • Lead the development of Cesium Astro’s Communication System and Subsystems Integration and Tests and validate space systems requirements and interfaces., • Collaborate with System Engineering processes for requirements management, flow down, and traceability., • Lead selection and definition modem configuration, • Lead selection and definition of data layer configuration, • Own lab and equipment strategy, including management and optimization, and guiding key equipment purchase decisions., • Architect and Develop Communication test systems and collaborate with System Engineering developing test plans, and implementation of test plans and procedures., • Lead execution of verification/validation tests, ensuring completeness, quality, and traceability of results; present findings to key stakeholders., • Work closely with design teams to verify and evaluate system level performance., • Independently draw conclusions from test results, debug complex system-level issues, and provide actionable feedback to design and verification teams., • Adapt and optimize test plans based on evolving hardware/software capabilities and test infrastructure constraints., • Design and oversee time-synchronized test setups using signal generators and spectrum analyzers to validate timing budgets., • Thrive in a fast-paced startup environment and take ownership of critical test systems for leading-edge satellite communication systems., • Provide technical leadership and mentorship to junior engineers; establish best practices for integration and verification, • Drive continuous improvement in test methodologies, automation, and lab infrastructureJOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Master’s degree (MS) or higher degree in Electrical Engineering or related discipline from an accredited university or institution, or equivalent experience, • Minimum 5-7 years relevant job experience, • Very strong background in Communication theory., • Experience with and understanding of satellite-communications standards (NR NTN, DVB-S2x, CCSDS)., • Hands-on experience with lab instruments such as digital oscilloscopes, multimeters, source measurement units, RF signal generators, spectrum analyzers, vector network analyzers (VNAs), and vector signal analyzers, • Hands-on experience in developing hardware and measurement abstraction layers, and test automation setups using basic scripting and SW development with common programming/scripting languages (Python, MATLAB, etc.), • Good understanding of RF and mixed-signal hardware (e.g. amplifiers, filters, ADCs/DACs, antennas) and its impact on system performance and test design, • Proficient in performing measurements and data analysis including S-parameters, AM/PM, compression, noise figure, harmonics/spurious emission, phase noise, switching speed, bit error rate, adjacent channel power, linearity, EVM and group delay, • Hands-on experience with designing test setups and working in anechoic chambers for antenna systems evaluation, • Proven experience designing and leading complex test setups and integration efforts, • Experience independently debugging complex system-level issues and driving resolution across teamsPREFERRED QUALIFICATIONS, • Knowledge of satellite and wireless communication systems and protocols, • Experience in wireless synchronization and parameter sensing techniques, • Familiarity with phased array antenna architectures and array calibration

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add several Senior Applications Engineer II to our rapidly growing customer-facing team. In this position, you will represent Cesium as a technical expert on our products, building relationships with our customers from the marketing stage all the way through in-orbit support. A major part of CesiumAstro’s mission is to deliver space communication systems that work out of the box, and the Applications Engineering Team will play a crucial role in delivering that seamless user experience. As a CesiumAstro Applications Engineer, you can expect a varied and dynamic day-to-day workflow. Some days will be spent in the lab with CesiumAstro design engineers, learning the ins and outs of our hardware and software. Some days will be spent helping shape the Cesium product roadmap by providing feedback on customer needs, goals, and user experience; you will act as the “Voice of the Customer” to provide insight and clarity to developers. Some days will be spent at customers’ labs or on video calls, teaching customers how to use our products. Some days will be spent crafting app notes and diagrams to provide users with a space communication system that truly works out of the box. This role is heavily focused on technical customer interaction. As such, exceptional technical communication skills are required. Candidates with relevant work samples, such as public app notes or user manuals, will be highly preferred. This role may require up to 20% travel to customer facilities and trade shows.JOB DUTIES AND RESPONSIBILITIES • Guide technical customers through the use and integration of CesiumAstro products., • Author technical application notes, user manuals, and white papers., • Transfer customer feedback to our product development teams., • Build long-term relationships with technical customers., • Rapidly understand, troubleshoot, recreate, and solve customer-reported anomalies., • Develop processes and procedures to structure product development and application., • Become a technical expert in Cesium’s products in depth to execute the above. This includes state-of-the-art RF, digital, and power electronics; embedded software; FPGAs; DSP; mechanical integration; and end-to-end wireless communication links., • Provide technical leadership and direction to the Business Development TeamJOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • At least 7 years of relevant experience in technical product development or application support., • Working knowledge of RF electronics and communication systems., • Experience with FPGA and embedded software for applications with software-defined radios., • Exceptional technical communication skills., • Experience building relationships with technical customers., • Experience with the methodical troubleshooting of electronics and software., • Working software proficiency in C/C++ or Python., • In-depth experience with RF electronics and communication systems, including link budgets., • Experience with a broad range of technical areas, such as high-speed digital systems (10+ Gbps), power electronics, FPGAs, DSP, embedded software, and mechanical interfaces (i.e. thermal, dynamics).PREFERRED EXPERIENCE, • Work samples of technical communication, such as public app notes or user manuals., • Experience with high-reliability electronics, such as aerospace., • Experience with small satellites., • Experience in technical product planning, marketing, or sales.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a dedicated and talented Quality Control Inspector to our team on second shift. In this position, you will work closely on an integrated team of Cesium managers, engineers, and other cross-functional personnel in the production of state-of-the-art satellite communication systems.JOB DUTIES AND RESPONSIBILITIES • Executing Quality Control processes associated with purchased product, manufacturing operations, and customer quality requirements., • Inspection of printed circuit boards / assemblies (PCB / PCBAs), verification of electrical, electronic, and electromechanical (EEE) components, and cable assemblies., • Inspection using calipers, height gauges, thread gauges, and VMMs (Vision Measuring Machine)., • Documentation of inspection activities using electronic information systems, written logs, and labels., • Assist in the development, maintenance, and improvements of inspection methods, inspection plans, and internal quality procedures and processes., • Assist with the resolution to internal/external nonconformance using root cause, corrective action, and 8D methodologies., • Assist in data analysis and reporting of department metrics as required., • Assist with the continuous improvement initiatives., • Assist in the resolution of audit findings, observations, and recommendations., • Assist with the control and disposition of non-conforming material (MRB)., • Drive scheduling of day-to-day processes; ensure timely and accurate turnaround., • Other QC duties as assigned.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Associate degree in a technical field preferred. H.S. Diploma or equivalent required., • Minimum of 5 years relevant work experience including a minimum of 2 years of experience in PCB/PCBA inspection required., • Experience with AS9100 or ISO9001 Quality Management Systems., • Experience with microscopic visual inspection., • IPC-A-610 / J-STD-001 certification., • Experience with ERP and PLM software systems., • Proficiency with reading engineering documents, CAD drawings, and detailed work instructions., • Strong digital, written, and verbal communication skills., • Strong attention to detail and ability to follow procedures., • Strong interpersonal skills and ability to work with others in a positive and collaborative manner.PREFERRED EXPERIENCE

Job Description Type: Full Time Location: Austin, TX Overtime Exempt: Yes Reports To: ARMADA HQ Travel Requirement: YES, nationwide to support onsite credentialing operations as mission needs require. Security Clearance Required: N/A *CONTINGENT UPON AWARDING OF GOVERNMENT CONTRACT Credentialing Specialists will provide credentialing service and support to operate IRS credentialing sites utilizing the GSA scheduling tool to manage credentialing appointments, run reports through the USAccess system, and use credentialing equipment to conduct post issuance and enrollment activities. These duties and responsibilities include, but are not limited to the following: Duties & Responsibilities: The Credentialing Specialists shall: • View, manage, and check daily appointments in time trade scheduling tool, • Credentialing Specialists shall perform enrollment and Issuance of Identification Cards to include PIV/Smart IDs, Access Cards, PAC Cards, issue and activate SmartID Cards,, • Perform Certificate Rekey, Pin Reset, and Card Update, • Credentialing Specialists shall perform card inventory and log cards on the Credential Inventory Tool (CIT), • Store cards in a lockable container (file cabinet), • Credentialing Specialists shall contact employees and contractors to schedule pick-up and activate SmartID, • Credentialing Specialists shall issue PAC Cards and Access Cards, • Issue Pocket Commission Credentials Collect SmartID Cards and PAC Cards; return terminated credentials to the Security Officer for destruction, • Credentialing Specialists shall keep a log of Cards issued and collected, • Perform Registrar and Activator duties as required, • Credentialing Specialists shall perform Card Custodian duties, • Credentialing Specialists shall mail SmartID Cards to Light Activation Kit Operators, • Applicant Communications regarding credential status, • Credentialing Specialists shall take photo, capture digital signatures, and assemble Pocket Commission inserts, and other ID Media duties as directed by ICAM, • Credentialing Specialists shall perform IRS credentialing functions and may be required to travel up to 40% of their annual work hours to support IRS credentialing and activation efforts. Short-term shiftwork to support the standard workday, night shift and weekend hours, shall be required, • Ability to complete required online credentialing training and maintain compliance with PIV-II SmartID credential requirements., • Knowledge of ICAM and USAccess credentialing processes, including enrollment, activation, and verification procedures., • Ability and willingness to travel nationwide to support onsite credentialing operations as mission needs require., • Knowledge of credentialing hardware such as FCUs, MCUs, and LAKs., • Knowledge of PII handling and federal credentialing policies., • Skill in managing daily credential operations, workstations and equipment., • Strong customer service and communication skills., • Skill in preparing and submitting daily site reports., • Strong attention to detail and documentation accuracy., • Experience with or ability to complete USAccess Registrar and Activator training or a comparable credentialing program., • Experience preparing, reviewing, and submitting required reports and documentation in accordance with established procedures. The above information has been designed to indicate the general nature and level of work to be performed. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of the contractor assigned to this position. Applying: If you feel you have the knowledge, skills and abilities for this position visit our careers page at . Special Notes: Relocation is not available for these jobs. ARMADA provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. ARMADA complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Must be able to successfully pass a background check, and pre-employment drug testing. Job offers are contingent upon results of background check and drug testing.

Job Description Job Notice Date Posted: April 23, 2026 Position: Procurement Manager Starting Rate: $75,000 – 85,000/year Job # 15-26 DEADLINE FOR APPLICATIONS: Open Until Filled Established in 1937, the Housing Authority of the City of Austin (HACA) is a national leader in providing safe, healthy and affordable housing options for the Austin community. HACA's mission is to cultivate sustainable affordable housing communities and partnerships that inspire self-reliance, growth and optimism. The Housing Authority of the City of Austin (HACA) is seeking a strategic and leadership-oriented Procurement Manager to join our high-performing team. This position plays a key role in the administration of the Procurement Department, including the purchasing and issuance of all materials and supplies for the agency. The successful candidate will perform senior-level buying functions and provide high-level administrative support to the Director. Notably, the Procurement Manager is responsible for stepping in to fulfill the duties of the Director in any capacity during their absence. In partnership with the U.S. Department of Housing and Urban Development, local government entities, and numerous non-profit agencies, HACA provides access to safe, stable housing to over 20,000 individuals. What you will do: Procurement Compliance & Strategic Sourcing • Regulatory Adherence: You will ensure every purchase made by the agency strictly follows the U.S. Department of Housing and Urban Development (HUD) procurement regulations, as well as state and local laws., • Solicitation Leadership: You will coordinate the entire solicitation process, including drafting technical bid specifications, managing public advertisements, and leading pre-bid and bid conferences to ensure a transparent and competitive process., • Contract Development: You will assist in the assembly of complex Invitation for Bids (IFB) and Request for Proposals (RFP) to secure high-value services from qualified contractors., • Director-Level Continuity: You are responsible for stepping in to fulfill the duties of the Director in any capacity during their absence, ensuring the department remains operational and compliant without interruption., • Staff Supervision: You will provide general supervision, guidance, and evaluation for Procurement Department staff, setting priorities and deadlines for daily tasks., • Vendor Performance: You will interview prospective vendors to vet their products and pricing, and perform ongoing evaluations of current vendor performance to maintain high standards for continued participation., • Workflow Automation: You will leverage procurement automation tools and technology to streamline purchasing workflows, reducing manual data entry and improving data management., • Fiscal Accountability: You will reconcile department credit cards, verifying that every charge correlates accurately with valid receipts and authorized purchase orders., • Inventory Auditing: You will conduct periodic physical inventories of supplies and equipment and manage the legal disposal of obsolete or exhausted materials., • Reporting & Legal Interface: You will prepare routine and special procurement reports and work closely with Legal staff to ensure the legal aspects of every contract and purchase are satisfied More about this position: Qualified candidates must possess: • Bachelor's degree in Business Administration, Management, or a related field., • Five (5) years of experience in purchasing and inventory control., • At least two (2) years of experience in a supervisory position., • Comprehensive knowledge of HUD, City, State, and Housing Authority procurement and contracting policies., • High proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Access), Yardi, or similar ERP systems., • Valid Texas driver's license., • Eligibility for coverage under HACA fleet auto insurance. Benefits: • Paid sick leave, annual leave, birthday leave & federal holidays, • 100% of employee health insurance premiums paid by the agency, • Supplemental health, dental, vision, and life insurance options for employees and family APPLICATIONS FOR EMPLOYMENT: Application for the open posted position must be submitted via online at the following website: However, we will accept applications at the Housing Authority of the City of Austin, 1124 S. IH-35, Austin, Texas 78704. No applications will be accepted after the noted closing dates on the job announcement. We encourage you to visit our website often to view and apply for vacant positions with the Housing Authority of the City of Austin or sign up for job alerts at our career site. The HACA is a drug-free workplace. A Criminal Background Check including a sex offender registry check. A Driving Record, Texas Driver's License, and a Physical/Drug Screening will be required upon offer of employment. EQUAL OPPORTUNITY EMPLOYER Job Posted by ApplicantPro

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal FPGA Engineer I to our team. If you enjoy working in a startup environment, and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for FPGA circuits and systems through all phases of the development process. The ideal candidate will have experience in FPGA design, verification, test, and deployment at the HDL level. FPGA HDL designs will include high-speed serial interfaces and data streams, digital processing cores, multiple clocks and clock domains, and management interfaces. Testing, validation, and verification will also be central tasks for any FPGA design. Experience in digital signal processing or board-level hardware design is also helpful in the role. As a principal level employee, you will present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Lead FPGA design and verification efforts for space-based programs ensuring compliance with industry standards and program requirements., • Work with cross-functional teams (system engineering, hardware designers, and software engineers) to define FPGA architecture, partitioning, interface definitions, and specifications., • Develop FPGA architecture based on high level system requirements to formulate part selections and SWAP-C estimates with an emphasis on FPGA utilizations and power consumption., • Act as the subject matter expert when participating in design reviews and bringing technical expertise and insight to the team., • Mentor and guide junior FPGA designers to drive for efficiency, quality, and consistency., • Maintain pulse on emerging technologies to drive future product development for space applications.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • A Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering or Computer Engineering from an accredited university or institution., • 9 years of industry or university research experience in the design, analysis, and implementation of FPGA systems at the HDL level., • Proficiency in VHDL and/or Verilog design capture., • Familiarity with radiation-tolerant FPGA devices (Xilinx Versal, Xilinx UltraScale+, Xilinx RFSoC, Micorsemi PolarFire, RTG-4)., • Expertise in FPGA implementation (synthesis, place and route and timing closure) and verification., • Proficient in HDL coder, Modelsim RTL simulation tools, Xilinx and Microsemi tool flows., • Strong understanding of space environment considerations and radiation effects on FPGA parts to develop mitigation techniques., • Hands-on experience with lab instruments such as digital oscilloscopes, spectrum analyzers, RF signal generators, and vector signal analyzers., • Experience with high-speed interfaces and power optimization techniques for space applications., • Proven track record of successful FPGA designs deployed in space programs., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Experience with worst-case analysis, failure method and criticality analyses, and reliability analysis., • Familiarity with digital communications and digital signal processing., • Experience with board-level hardware design., • Demonstrated ability to work efficiently with a distributed team., • Proficiency with git source code control.

Job DescriptionSalary: $89,000 - $122,900/year About SENTRYSIX International SENTRYSIX International is a veteran-owned and operated security consulting and technology firm specializing in comprehensive protection solutions, remote video surveillance, and high-level risk management services. We are trusted by public institutions and private enterprises to deliver mission-ready support in critical environments. Our values are rooted in integrity, service, and innovation. Position Summary The Regional Director of Business Development is a high-impact leadership role responsible for driving growth, building strategic partnerships, and expanding the SENTRYSIX footprint within a designated region. This role requires a self-motivated, experienced professional who can identify new business opportunities, manage client relationships, and lead regional sales and development efforts in alignment with company goals. Key Responsibilities • Develop and execute a strategic business development plan to grow the companys client base and regional market share., • Identify, qualify, and secure new contracts in the public and private sectors related to security operations, remote monitoring, and consulting services., • Foster and maintain long-term client relationships through regular communication, trust-building, and solution-focused support., • Collaborate with executive leadership, marketing, and operations to ensure alignment of sales strategies with business objectives., • Represent SENTRYSIX International at industry events, conferences, and community engagements., • Lead proposal development, presentations, and contract negotiations with prospective clients., • Monitor regional performance metrics and provide regular reporting to company leadership. Required: • Minimum 5 years of experience in business development, sales leadership, or strategic growth rolespreferably in security, defense contracting, law enforcement technology, or risk management industries., • Proven track record of meeting or exceeding sales and revenue targets., • Strong leadership, communication, and interpersonal skills., • Deep understanding of regional market dynamics and B2B sales cycles., • Prior experience in military, law enforcement, or homeland security sectors., • Existing relationships within government agencies, educational institutions, or enterprise-level clients., • Bachelors degree in Business, Marketing, Security Management, or related field (Masters degree a plus)., • Knowledge of remote surveillance, physical security systems, or security consulting services.

Job Description Skyways designs, builds, and operates fully autonomous long-range cargo aircraft. We have been flying real missions with real customers since 2017. Our V2 carries 30 lbs up to 500 miles and our V3 carries 100 lbs over 1,000 miles with 20+ hours of endurance. Both use a dual-hybrid design that takes off like a helicopter and cruises like a plane. We are currently flying on three continents, in controlled national airspace under FAA oversight, and in support of U.S. military operations. Backed by Y Combinator and a $37M STRATFI contract from the U.S. Air Force, we are moving from prototype to full-rate production with a path to Program of Record. Based in Austin, we are scaling fast and hiring people who want to build the world's largest fleet of autonomous logistics aircraft. The OpportunitySkyways is hiring a Senior Mechanical Engineer to own major aircraft subsystems from concept through flight. You will design hardware, build and test prototypes, and iterate quickly based on real-world performance. This role sits at the intersection of engineering, manufacturing, and flight operations, ensuring systems are both reliable in the air and practical to build at scale. We are looking for someone with strong technical judgment who is comfortable working hands-on with hardware and moving quickly through design, build, and test cycles.What You'll Do: • Own mechanical subsystems from concept through build, testing, and flight validation, • Design structural and mechanical components for autonomous aircraft, • Develop prototypes and iterate designs based on ground testing and flight data, • Lead subsystem design reviews and drive system level integration across structures, avionics, propulsion, and payload systems, • Partner with manufacturing early in the design process to ensure systems are buildable and capable of scaling to production, • Help define design standards and engineering practices as the team growsWhat You'll Bring:, • Bachelor’s or Master’s degree in Mechanical Engineering or a related field, • Experience working on complex hardware systems such as aircraft, robotics, or autonomous vehicles, • Strong CAD and mechanical design experience, • Experience taking hardware from concept through build, integration, testing, and deployment, • Comfort working closely with prototype builds and resolving integration issues, • Strong collaboration skills across engineering, manufacturing, and operations teamsBonus Points:, • Experience designing aircraft structures or flight hardware, • Experience working with composite materials or lightweight structures, • Experience supporting prototype builds, system integration, or flight testing Due to U.S. government contract requirements, this role is limited to U.S. citizens, U.S. permanent residents, or candidates from specific countries authorized under applicable export control regulations. Skyways is an Equal Opportunity employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, national origin, sex, sexual orientation, gender identity, disability, protected veteran status or any other factor protected by applicable local, state or federal laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Principal Flight Dynamics Engineer I to lead orbit design, trajectory analysis, and orbit determination analysis efforts across our spacecraft operations. You will own the flight dynamics function from early mission concept through launch, commissioning, and on-orbit operations. This role requires deep technical expertise, strong cross-functional collaboration, and the ability to build scalable tools and processes in a fast-paced startup environment. You will play a critical role in shaping mission architecture, ensuring orbital safety and compliance, and enabling reliable spacecraft operations. You will work closely with the engineering team, program management to ensure the successful build and launch of our satellite. Element will be the largest, most powerful rideshare satellite in LEO. We’re launching eight of them in the next four years, starting with our first launch this year. Together, our small team will design, build, and iterate to reduce mass and cost while increasing performance, reliability, and manufacturability of a new generation of satellites. Let’s build! JOB DUTIES AND RESPONSIBILITIES • Lead orbit design, trade studies, and trajectory optimization for LEO/GEO/cislunar/deep space missions (as applicable)., • Develop and maintain high-fidelity mission analysis models., • Perform launch window analysis, injection targeting, and dispersions analysis., • Define and validate ΔV budgets across all mission phases., • Support constellation design, station-keeping strategies, and end-of-life disposal planning., • Develop orbit determination strategies using tracking data (GNSS, radiometric, optical, etc.)., • Support maneuver planning, targeting, and execution analysis., • Establish conjunction assessment and collision avoidance processes., • Support mission readiness reviews, launch campaigns, and on-orbit anomaly resolution., • Build, validate, and maintain flight dynamics tools and simulation environments., • Automate analysis workflows to scale with company growth., • Integrate tools with GNC, FSW, and mission operations pipelines., • Evaluate and implement industry-standard tools (e.g., GMAT, STK, ODTK, MONTE, custom Python/C++ frameworks)., • Collaborate closely with GNC, propulsion, systems engineering, and mission operations teams., • Provide technical mentorship to junior engineers., • Contribute to technical roadmaps and long-term mission strategy., • Interface with customers, partners, and regulatory agencies as needed.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • B.S. in Aerospace Engineering, Astrodynamics, Physics, or related field (M.S. or Ph.D. preferred)., • 9 years of experience in flight dynamics, mission analysis, or astrodynamics., • Deep understanding of orbital mechanics and perturbation modeling, orbit determination and estimation techniques, maneuver design and optimization, and conjunction assessment and space traffic management, • Experience supporting real spacecraft missions through launch and operations., • Strong programming skills (Python required; MATLAB, C++, or similar a plus)., • Experience with industry-standard astrodynamics tools., • Ability to work independently in a high-ownership environment.PREFERRED EXPERIENCE, • Experience with small satellite or constellation missions., • Background in autonomous navigation or onboard orbit determination., • Familiarity with regulatory compliance (FCC, NOAA, ITU, Space-Track, etc.).

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a dedicated and talented Senior Quality Engineer to our team. In this position, you will work closely with an integrated team of Cesium managers, engineers, and other cross-functional personnel in the production of state-of-the-art satellite communication systems.JOB DUTIES AND RESPONSIBILITIES • Establish, implement, and maintain quality management system procedures and processes., • Resolve nonconformances with cross-functional teams using failure analysis, root cause, corrective action, and 8D methodologies., • Conduct supplier performance evaluations and supplier audits including metrics reporting., • Investigate, evaluate, and resolve supplier nonconformances and corrective actions., • Lead process improvement projects to drive results across the organization., • Develop and drive quality objectives and measurable metrics., • Manage and conduct QMS training., • Support internal and external QMS audits in accordance with AS9100 and applicable requirements., • Support and interface across functional disciplines including Supply Chain, Manufacturing, and Engineering personnel.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in a technical field required., • 8+ years relevant work experience., • Experience with continuous quality improvement activities in a manufacturing environment., • Experience with AS9100 or ISO9001 Quality Management Systems compliance., • Strong attention to detail and ability to follow procedures., • Strong interpersonal skills and ability to work with others in a positive and collaborative manner.PREFERRED EXPERIENCE, • Experience in the aerospace or electronics industry.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior PCB Designer II (RF) to our team. If you are excited about working in a startup environment, have a strong work ethic, and are passionate about cutting-edge electronics, we would like to hear from you. In this position, you will perform PCB design for modern digital, analog, and power electronics circuits for ground, airborne, and space applications. Candidates should be comfortable with a varied workflow that may involve multitasking between different PCB designs, schematic symbol review, PCB footprint creation, library management, design file release into product lifecycle management (PLM) systems, and production support. This position will work closely with analog and power electronics engineers, mechanical and manufacturing engineers to implement PCB designs for quick prototyping and volume production that meet design for manufacturability (DFM), design for cost (DFC), and design for testability (DFT). JOB DUTIES AND RESPONSIBILITIES • Own PCB designs for power supply modules and mixed-signal cards from beginning to end, including conducting design reviews for component placement, routing, and fabrication file reviews for DFM, DFC, and DFT., • Perform complex digital, analog and power electronics PCB design in Altium Designer, working closely with power electronics, manufacturing, and mechanical design engineers., • Generate mechanical 3D models and work with mechanical engineers to ensure compliance with mechanical and environmental requirements., • Generate and release Assembly Drawings, Fabrication Drawings, and PCB fabrication files (Gerbers, ODB++)., • Review schematic symbols and generate IPC compliant PCB component footprints., • Participate in full product lifecycle development from board design to release into manufacturing and production support.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Associate’s degree in Electronics Engineering Technology or similar., • +7 years of experience as a PCB Designer., • Strong experience with Altium Designer., • Strong experience with PCB design with a focus on digital and power electronics. This includes understanding of critical component placement and routing for analog and power electronics circuits that include power converters, gate driver, EMI filter, analog and digital controllers., • Experience with shielding and PCB design to mitigate EMI and crosstalk., • Knowledge of current density requirements for high current circuits, including strong understanding of via selection and power/ground plane design to meet signal integrity, power integrity, and thermal management., • Experience with high-reliability, aerospace, and/or IPC Class 3 designs., • Strong experience with design for manufacturability (DFM), design for cost (DFC), and design for testability (DFT)., • Strong organizational skills.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking for a Senior Machine Learning Engineer II to contribute to the development and deployment of machine learning solutions for our advanced distributed processing platforms. This role is highly collaborative, working closely with product, backend, and systems engineering teams to design, integrate, and maintain robust ML applications that support CesiumAstro’s mission. JOB DUTIES AND RESPONSIBILITIES • Design, develop, and maintain deep learning pipelines for real-time data processing., • Evaluate and curate relevant datasets; establish model benchmarks to measure performance., • Improve observability and monitoring for deployed ML systems., • Develop, deploy, and maintain microservices that deliver ML capabilities to production systems., • Enhance tooling and orchestration for tuning, deployment, and scaling of ML pipelines., • Collaborate in research and development initiatives, contributing to new ML capabilities for aerospace and defense applications., • Document designs, workflows, and operational best practices to ensure maintainable and resilient ML systems. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s or higher degree in Computer Science, Engineering, or related technical field., • 6+ years of professional experience developing production-ready ML systems in small to medium-sized organizations (additional experience required for larger organizations)., • Proficiency in Python with demonstrated experience implementing ML algorithms in production environments., • Experience designing and maintaining APIs for ML services., • Hands-on experience deploying and managing ML workflows in Kubernetes environments., • Strong communication skills with the ability to clearly articulate complex technical ideas., • Ability to work effectively in a collaborative, Agile engineering team. PREFERRED EXPERIENCE, • Knowledge of microservice architectures and distributed data systems., • Familiarity with aerospace or defense applications of ML systems.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Supplier Quality Engineer II to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you.JOB DUTIES AND RESPONSIBILITIES • Implement and maintain supplier quality processes and documentation in accordance with AS9100, leveraging business systems functionalities to drive process efficiency and effectiveness., • Work cross-functionally with engineering, operations, supply chain to ensure supplier flow down and compliance to QMS, customer, industry, regulatory/statutory, and any applicable requirements., • Maintain approved suppliers including supplier qualification, periodic performance review, supplier relationship management, risk assessment, and removal, if needed., • Provide technical guidance, support, and training to suppliers to ensure alignment to CesiumAstro requirements for execution., • Collaborate with design engineering to ensure suppliers design for manufacturability (DFM) considerations are incorporated., • Perform nonconformance investigation and drive root cause corrective action when supplier issues occur., • Support disposition of nonconformances including rework, scrap, and RMA., • Monitor and drive supplier corrective actions requests (SCARs) when escalated., • Establish and analyze supplier performance metrics including defect rate, nonconformances, on-time delivery, cost of rework/scrap, and supplier corrective action resolution., • Use performance data to drive strategic partnerships and develop supplier capability with key suppliers., • Perform supplier site audits and source inspection as needed., • Identify and implement continuous improvement initiatives.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in engineering, quality, or a related technical field., • Minimum of 3 years of supplier quality experience in aerospace and defense industries., • Experience managing suppliers for space-grade machining, PCBs, PCBAs, integrated assemblies, and test., • Demonstrated skills in supplier management, leadership, communication, and interpersonal skills, • Ability to interpret engineering documentation, requirements, and other supplier flow downs., • Experience with certified quality management systems such as AS9100 or ISO 9001., • Expertise in root cause analysis methodologies and corrective action implementation., • Experience with aerospace and electronics manufacturing.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Electronics Engineer II to our Digital/Mixed-Signal Electronics team. If you enjoy working in a startup environment and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. At the Senior II level, you will be tasked with full-stack hardware development for complex modules and small systems. You will have the opportunity to start at concept development and progress through detailed design, analysis, layout, build, test, and delivery, doing hands-on work at each phase. The Senior II level also introduces technical leadership opportunities, gaining responsibility for small teams of hardware engineers developing new products and systems. At a small company and a startup, your work will make direct contributions to the success of the business. The work is challenging and impactful, requiring both breadth and depth of technical knowledge. Our products are made for high-reliability space and airborne applications, so designs require high levels of technical rigor while maintaining the agility of a startup environment. The successful candidate will also present engineering design review materials to our customers and executive team. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Own end-to-end design of complex electronics modules and small systems, from concept and architecture through schematic, layout, test, and production., • This role focuses on digital and mixed-signal hardware development for space applications. Product lines include state-of-the-art software-defined radios (SDRs), single-board computers (SBCs), and control & telemetry subsystems for complex phased array antenna payloads., • Lead small teams of hardware engineers to develop new products with multiple electronics modules., • Develop hardware architecture and write hardware requirements for systems of moderate complexity., • Perform detailed and complete schematic design for complex boards, ranging from key components to supporting passives., • Perform detailed PCB layout in Altium Designer for complex boards, often working with a PCB Designer., • Complete board-level and box-level analysis such as worst-case circuit analysis, signal integrity analysis, and power integrity analysis, and guide interpretation of results., • Develop bring-up plans and design verification plans for new hardware and systems., • Perform bring-up and key verification testing of modules and small integrated systems, often working with a technician to complete validation., • Release modules and assemblies to production, working with the Manufacturing and Test Engineering teams., • Mentor junior and senior engineers to build technical understanding and professional development., • Use working knowledge of adjacent fields, such as software and mechanical, to streamline development of electronics modules and systems.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 6 years of relevant experience in board-level electronics design, analysis, and test., • Significant experience designing electronics with rigor, in teams that value thorough analysis and testing. Aerospace design experience preferred but not required., • Expertise in aspects of digital and mixed-signal electronics, such as signal integrity, implementing FPGAs on boards, ADCs/DACs, and telemetry subsystems. Experience with high-speed digital (e.g. 10+ Gbps SerDes) and SDR applications are preferred but not required., • Experience owning the design phase of complex board-level electronics, including trade studies, key part selection, and detailed design., • Experience delivering hardware designs through production and deployment., • Expertise in PCB layout, including high-density interconnect (HDI) stackup design and high-speed routing., • Experience running board-level signal integrity and/or power integrity simulation tools such as Ansys SIwave, ADS SIPro, or Mentor Hyperlynx., • Proven success in debugging, root cause analysis, and design reviews., • Strong working knowledge of adjacent fields, such as software and mechanical, that guides hardware design and system design., • Expert-level proficiency in electronics design tools such as Altium., • Extensive lab experience for bring-up and verification of new hardware., • Excellent written and spoken communication skills.PREFERRED EXPERIENCE, • 8+ years of professional electronics design experience., • Experience leading small teams of hardware engineers to develop multi-module assemblies, including hardware architecture, requirements, make/buy decisions, and interconnects., • Expertise in high-speed digital electronics (e.g. 10+ Gbps SerDes), including signal integrity simulation and lab verification, SerDes optimization (e.g. emphasis and drive level), and high-speed interconnect solutions., • Expertise in software-defined radio (SDR) applications., • Direct experience designing high-reliability electronics for space or defense applications, including part derating, worst-case analysis, and thermal constraints.

Job DescriptionDescription: The JF Petroleum Group stands as a premier leader in the North American fueling infrastructure industry, offering comprehensive turn-key solutions for distribution, construction, and service needs. We serve a diverse clientele including retail fueling stations, commercial and government fleets, and emergency power customers. The Construction Project Coordinator will oversee the administrative duties as it relates to construction projects. Typically, a Construction Project Coordinator is involved from the early stages of development until the project is completed. Construction Project coordinators are responsible for ensuring all construction documents and regulatory forms are completed and provided to customers in a timely fashion. The Construction Project Coordinator is also responsible for all coordination and retrieval of all project documents for a project as well as assisting in the management of the project documents. The Construction Project Coordinator will also be called upon to assist the Project Managers in logistics of projects and equipment verification. The Construction Project Coordinator will also be responsible for the management of smaller projects. • Sets up new projects on bid list and provision new projects and bids in SmartSheet., • Sets up new project folders and sub-folders for each new project on Server, • Sends out and manages bid requests to sub-contractors and vendors for new bid opportunities., • Assists with procurement of fire hydrant meters when required on a project., • Assists in the procurement of permits for projects., • Submit construction notifications to TCEQ., • Assists in the preparation of all contract documents for a project., • Prepares PO issuance documents for accounting department to issue Purchase Orders., • Assures materials are received into warehouse and staged for projects prior to start date., • Assures materials that are received for project are correct per equipment order., • Assists in logistics of project equipment., • Assists in overall management of individual projects as needed., • Assists in regulatory notifications and scheduling of inspections with city and state., • Manages and coordinates smaller service construction projects and keep updated using SmartSheet log., • Manages and initiates billing cycle for service construction projects with billing team., • Assists in management of spill bucket program and spill bucket replacements., • Assists in procurement and ordering of equipment., • Manages closeout document process for completed projects., • Presents closeout and other required documents to customers., • Assists in billing of construction projects.Requirements:, • Highschool Diploma or GED required, • Proficient with Microsoft Office, • Proficient with SmartSheet, • Computer Skills (will require lots of reporting), able to type 40 WPM, • Willingness to show initiative, • Ability to think alone and make quick decisions, • Ability to think “outside the box”, • Must be able to meet company’s employment requirements, which includes passing a drug screen, criminal background check, and MVR, if driving for the company, • Physical Requirements: include occasional lifting/carrying of 10 pounds; visual acuity, speech and hearing; hand and eye coordination and manual dexterity necessary to operate a computer keyboard and basic office equipment. Subject to sitting, standing, reaching, walking, twisting, and kneeling to perform the essential functions. Working conditions are primarily inside an office environment. Prolonged periods sitting at a desk and working on a computer. JF Petroleum offers: • Competitive pay, • 401(k) with company match, • Paid time off, • Paid holidays, • Health benefits (eligible 1st of the month following 30 days) including Medical, Vision, Dental, Disability, • Life insurance-company provided, • Bonus program eligibility, • Paid training for field personnel, • Uniforms provided for field personnel, • Relocation Assistance will be considered for qualified candidates *JF Petroleum Group is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or any other legally protected status.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. CesiumAstro is seeking an RF Systems Architect to lead the definition and development of next-generation ISR (Intelligence, Surveillance, and Reconnaissance) RF payloads, with emphasis on radar systems, RF sensing, and wideband signal collection. This role is highly strategic and technical, focused on end-to-end RF payload architecture—from antenna and front-end design through system-level performance, signal processing considerations, and mission integration. The ideal candidate demonstrates deep experience in phased array systems, wideband RF architectures, and space-based sensing payloads. KEY RESPONSIBILITIES • Define and lead system architecture for advanced ISR RF payloads, including radar and RF sensing systems for space and airborne platforms., • Translate mission objectives into end-to-end RF payload architectures, including antenna systems, RF front-end, digitization, and downstream processing., • Drive architectural trade studies across performance, SWaP, scalability, and mission constraints., • Lead concept development for wideband, multi-beam, and multi-function RF payloads, including electronically steered arrays and digital beamforming systems., • Partner with business development to shape technical strategy, support proposals, and secure new program opportunities., • Serve as a Subject Matter Expert (SME) in RF payload architecture, supporting internal reviews and customer engagements., • Guide cross-functional teams through architecture definition, prototyping, and system validation., • Stay at the forefront of emerging ISR, radar, and RF sensing technologies and incorporate advancements into product roadmaps., • Mentor engineers and establish best practices in RF system architecture and payload development., • Communicate complex technical concepts, architectures, and trade-offs to internal stakeholders and external customers. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Master’s degree in Electrical Engineering, Physics, or a related technical discipline (advanced degree preferred)., • 15+ years of professional experience in RF engineering, radar systems, or RF sensing technologies., • Demonstrated expertise in RF system design fundamentals, including link budgets, noise analysis, and RF propagation., • Strong technical background in phased array antennas, beamforming techniques, and wideband RF systems., • Experience working with RF hardware components such as antennas, LNAs, mixers, ADCs/DACs, and frequency conversion chains., • Proficiency with RF and electromagnetic simulation tools (e.g., MATLAB, ADS, HFSS, CST, or similar)., • Solid understanding of radar principles and/or signal processing techniques relevant to RF sensing applications., • Experience in aerospace, defense, or space-based systems environments., • Demonstrated technical leadership experience or progression into senior/architect-level roles., • Strong analytical and problem-solving skills in complex engineering environments., • Effective written and verbal communication skills for technical collaboration. PREFERRED EXPERIENCE, • Experience contributing to or leading successful program captures and technical strategy., • Demonstrated innovation, including patents or novel RF/antenna system developments.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add an Electronics Assembly Technician I to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. As an Electronics Assembly Technician at Cesium Astro, The Electronics Assembly Technician I supports the build, quality, and on-time delivery of electronic hardware by performing routine assembly, inspection, and production tasks under close supervision. This entry-level role follows established work instructions, drawings, and quality standards to assemble circuit card and final electronic assemblies used in advanced aerospace and communications products. The technician develops foundational technical skills while contributing to a fast-paced manufacturing environment and may assist with inventory, material movement, or other production support activities as needed.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • A high school diploma or GED., • 0-1 years of experience in electronic assembly operations such as SMT, AOI, Prepping Components, X-Ray, De-Panel, and Soldering., • Experience in interpreting schematics, drawings, diagrams, and other visual aides for assembly., • Ability to work with team members to ensure production roles are clear., • Ability to regularly communicate with engineers and design staff to ensure designs are being implemented correctly., • Experience using tools to make or repair parts and products., • Excellent hand-eye coordination., • Ability to differentiate between colors to identify colored electrical wires., • Attention to detail and the maintenance of a clean workspace., • Ability to read parts lists and make sure all are present., • Familiarity with undergoing routine preventive maintenance., • Experience maintaining inventory and placing orders for more supplies as needed., • Basic computer skills to complete quality control forms., • Familiarity working in an ESD and FOD-controlled environment.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Electronics Engineer I to our Digital and Mixed-Signal Electronics team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. At the Senior level, you will be tasked with full-stack hardware development for complex modules. You will have the opportunity to start at concept development and progress through detailed design, analysis, layout, build, test, and delivery, doing hands-on work at each phase. At a small company and a startup, your work will make direct contributions to the success of the business. The work is challenging and impactful, requiring both breadth and depth of technical knowledge. Our products are made for high-reliability space and airborne applications, so designs require high levels of technical rigor while maintaining the agility of a startup environment. The successful candidate will also present engineering design review materials to our customers and executive team. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Own end-to-end design of electronics modules, from concept and architecture through schematic, layout, test, and production, • Own the digital and mixed-signal portions of complex RF electronics, such as phased array control circuitry, • Design circuits with FPGAs, processors, microcontrollers, and other complex programmable targets, • Design mixed-signal electronics ranging from software-defined radios to telemetry subsystems, • Perform detailed and complete schematic design for complex boards, ranging from key components to supporting passives, • Perform detailed PCB layout in Altium Designer for complex boards, sometimes working with a PCB Designer, • Complete analysis such as worst-case circuit analysis, signal integrity analysis, and power integrity analysis, • Develop bring-up plans and design verification plans for new electronics modules, • Perform bring-up and key verification testing of modules, often working with a technician to complete validation, • Release modules to production, working with the Manufacturing and Test Engineering teams, • Mentor junior engineers to build technical understanding and professional development, • Use working knowledge of adjacent fields, such as software and mechanical, to streamline development of electronics modulesJOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 4 years of industry or university research experience in board-level electronics design, analysis, and test., • Direct experience designing high-reliability electronics for space or defense applications, including part derating, worst-case analysis, and thermal constraints., • Experience owning the design phase of circuits or boards, including trade studies, key part selection, and detailed design., • Experience delivering subcircuit or board designs to production and deployment., • Experience performing complex PCB layout, such as high-density interconnect (HDI) and high-speed digital or power electronics., • Experience running board-level signal integrity and/or power integrity simulation tools such as Ansys SIwave, ADS SIPro, or Mentor Hyperlynx., • Working knowledge of adjacent fields, such as software and mechanical., • Proficiency in electronics design tools such as Altium., • Strong lab experience for bring-up and verification of new hardware., • Excellent written and spoken communication skills.PREFERRED EXPERIENCE

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a highly experienced Principal Quality Systems Engineer to lead the architecture, standardization, and continuous improvement of our enterprise Quality Management System (QMS). This senior individual contributor will drive transformation initiatives to ensure alignment with ISO 9001 and AS9100 standards, building a scalable, data-driven quality framework across the organization. This role operates at the intersection of quality, engineering, and operations, enhancing process consistency, documentation usability, and system effectiveness. The ideal candidate will also define and govern information architecture and content strategy for internal documentation systems, enabling efficient knowledge transfer, audit readiness, and improved diagnosability and serviceability. JOB DUTIES AND RESPONSIBILITIES • Lead enterprise-wide QMS transformation and standardization initiatives across product lines, engineering, and support functions, • Influence cross-functional teams to adopt consistent processes, quality practices, and knowledge systems, • Serve as a senior technical authority on quality systems, process governance, and documentation architecture, • Architect and maintain a centralized, controlled repository for process documentation, templates, and standards, • Define and implement information architecture and content strategy for internal documentation systems, • Ensure compliance with AS9100 requirements, including document control, traceability, revision management, and records retention, • Design intuitive site maps, user flows, and documentation structures, • Establish enterprise process frameworks that reduce reliance on inconsistent or informal practices, • Define project scope, goals, deliverables, timelines, and task assignments, • Monitor progress, identify risks, and implement mitigation strategies, • Ensure deliverables meet quality standards and organizational requirements, • Evaluate outcomes, capture lessons learned, and drive continuous improvement, • Develop training materials and continuous learning programs for employees, • Facilitate knowledge transfer to ensure awareness of QMS updates and process improvements, • Analyze documentation usability and implement enhancements based on user feedback, • Analyze workflows and user behavior to improve efficiency and accessibility, • Conduct usability testing to refine information architecture and documentation systems, • Partner with engineering and support teams to improve diagnosability, serviceability, and product qualityJOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in Engineering, Information Science, or a related field (or equivalent experience), • 12–15 years of experience in Quality Systems, Systems Engineering, or enterprise process architecture, • Strong knowledge of ISO 9001 and/or AS9100 standards and audit practices, • Deep understanding of QMS frameworks, configuration management, and process governance, • Experience designing and managing information architecture and content strategy, • Proven ability to develop training, onboarding, and continuous learning programs, • Expertise in usability analysis, workflow optimization, and process improvement, • Demonstrated success collaborating across engineering and support teams, • Familiarity with project management tools (e.g., Jira, MS Project, Smartsheet), • Strong analytical thinking, problem-solving, and decision-making skills

Job DescriptionBusiness Analyst 3 Location: Austin, TX Duration: 3-Month Contract Position Overview We are seeking an experienced Business Analyst 3 to support enterprise modernization initiatives involving the conversion of legacy systems into modern web-based applications. Working under the direction of the IT Applications Director, this role will lead business and technical analysis efforts, collaborating closely with stakeholders, developers, architects, and database teams to ensure successful modernization outcomes. The ideal candidate will have extensive experience in legacy system analysis, requirements gathering, SDLC processes, and translating complex business functionality into actionable technical requirements for .NET and SQL-based solutions. Key Responsibilities • Lead and execute business and technical analysis activities supporting modernization projects, • Analyze legacy applications, workflows, and SQL-based systems to document current-state functionality, • Gather, document, validate, and manage business, functional, and technical requirements, • Translate legacy system behaviors into requirements for modern web-based applications, • Conduct gap analyses between current systems and future-state solutions, • Collaborate with developers, architects, and database teams to support .NET and SQL-based development efforts, • Facilitate stakeholder meetings, walkthroughs, and requirements review sessions, • Track project tasks, milestones, issues, and risks, • Support development and QA teams by clarifying requirements and validating delivered functionality, • Communicate project status, dependencies, and risks to leadership and stakeholders, • Develop clear, complete, and testable requirements documentationRequired Qualifications, • 12+ years of experience in legacy system analysis and modernization strategies, • 12+ years of SDLC experience, particularly in web-based application development, • 12+ years of experience gathering and documenting business, functional, and technical requirements, • 12+ years translating legacy application functionality into modern system requirements, • 12+ years of stakeholder facilitation, communication, and project coordination experience, • Strong knowledge of SQL-based data models and system integrations, • Experience reviewing workflows and identifying modernization opportunities, • Excellent written, verbal, and presentation communication skills, • Ability to work independently and collaborate across technical and business teams, • Experience identifying compliance and system gaps and proposing effective solutions, • Ability to manage multiple priorities in fast-paced project environmentsPreferred Qualifications, • Bachelor’s degree in Business, Computer Science, Information Systems, or related field, • 12+ years of experience in Business Analysis or PM/BA roles, • 8+ years of experience converting legacy applications into web-based solutions, • 8+ years of experience working with .NET development teams and SQL databases, • 8+ years supporting large-scale IT systems in government or regulated environments, • Experience with project management methodologies

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Communications Systems Engineer to our team. If you enjoy working in a startup environment and are passionate about developing Python-based simulations, modeling tools, and software-enabled analysis for leading-edge phased arrays, satellites, spacecraft, and aerospace systems, we would like to hear from you. The ideal candidate will have a strong background in systems engineering, experience with space-based communication systems, and hands-on Python development skills for modeling and simulation. In this position, you will help develop and maintain Python simulations and other analysis tools used to model how our communications hardware functions, evaluate SATCOM constellation performance, support link budgets and system trade studies, and inform requirements development, concept of operations (CONOPS), verification planning, and risk assessment. You will work across multidiscipline engineering teams, contribute to technical decision-making, and support program execution with clear analysis, modeling results, and practical engineering judgment. JOB DUTIES AND RESPONSIBILITIES • Develop, maintain, and validate Python-based simulations and modeling tools to characterize communications hardware, RF payloads, phased arrays, and SATCOM constellation behavior., • Model end-to-end system performance, including link budgets, coverage and capacity, pointing and geometry, operational scenarios, and hardware/software trade studies., • Evaluate customer and operational needs and help translate them into system requirements, technical assumptions, interfaces, and verification approaches., • Collaborate with RF, antenna, hardware, software, cloud/platform, manufacturing, and program management teams to support system design and technical execution., • Contribute to cloud-hosted Python tooling, data processing workflows, APIs, or simulation infrastructure as needed to support modeling and analysis activities., • Participate in the development of systems engineering processes for requirements management, flow down, traceability, and model-based analysis., • Support risk analysis, trade studies, and mitigation planning with quantitative analysis and simulation results., • Identify and help resolve technical issues that may impede engineering progress; communicate analysis methods, assumptions, results, and recommendations clearly to internal stakeholders and, as needed, external customers. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in electrical engineering, aerospace engineering, computer science, or a related field., • A minimum of 6 years of experience with emphasis on communications systems, SATCOM, RF systems, aerospace systems, or related modeling and simulation work., • Strong Python development experience, including writing maintainable analysis, modeling, simulation, or automation code., • Practical experience with communication systems analysis such as link budgets, RF propagation, antenna or phased array performance, payload modeling, or constellation-level trade studies., • Experience working with hardware, RF, software, or product/component developers to understand interfaces, assumptions, and system-level impacts., • Familiarity with common scientific Python libraries and workflows such as NumPy, SciPy, pandas, plotting/visualization tools, testing, version control, and code review., • Ability to support cloud-based Python development, simulation infrastructure, data pipelines, APIs, or backend services when needed., • Excellent written and verbal technical communication skills, including the ability to document models, assumptions, results, and recommendations., • Proficiency with, or willingness to work in, requirements management tools such as DOORS or Jama.

Job Description Skyways designs, builds, and operates fully autonomous long-range cargo aircraft. We have been flying real missions with real customers since 2017. Our V2 carries 30 lbs up to 500 miles and our V3 carries 100 lbs over 1,000 miles with 20+ hours of endurance. Both use a dual-hybrid design that takes off like a helicopter and cruises like a plane. We are currently flying on three continents, in controlled national airspace under FAA oversight, and in support of U.S. military operations. Backed by Y Combinator and a $37M STRATFI contract from the U.S. Air Force, we are moving from prototype to full-rate production with a path to Program of Record. Based in Austin, we are scaling fast and hiring people who want to build the world's largest fleet of autonomous logistics aircraft. The Opportunity We’re hiring a CTO to take what already works and make it scale. Right now, the system flies. The team is strong. The pieces exist. What’s missing is tight ownership across the full stack to turn this into a production system that is reliable, repeatable, and fast to iterate on. This role owns that. You will run engineering across autonomy, software, hardware, and systems integration. You will work directly with flight ops and manufacturing. You will decide where we invest, what we cut, and how we move faster without breaking things that matter. This is not a role where you inherit a clean system. It’s a role where you shape it. What You'll Do: * Own engineering execution across the full system * Turn a working aircraft into a production-ready, repeatable platform * Scale the team without turning it into a slow, process-heavy organization * Make fast, high-quality decisions that unblock the team * Work closely with flight ops and manufacturing so what we build actually works in the field * Be the technical counterpart to the CEO in customer and investor conversations What You'll Bring: * You’ve built and shipped real systems, not just led teams that talk about them * You’ve taken something from prototype to production and dealt with the mess that comes with it * You can operate across disciplines and connect the system end-to-end * You know how to increase speed without losing reliability * You’re comfortable owning outcomes, not just direction Bonus Points: * You’ve worked on aircraft, UAVs, or other safety-critical systems that operate in the real world * You’ve dealt with certification, regulatory constraints, or government customers * You’ve built systems that combine hardware, software, and autonomy into one integrated product * You’ve scaled a team from early stage to production without losing speed * You’ve seen what breaks when you go from “it works once” to “it works every time” Want to join our mission? Apply to learn more! Due to U.S. government contract requirements, this role is limited to U.S. citizens, U.S. permanent residents, or candidates from specific countries authorized under applicable export control regulations. Skyways is an Equal Opportunity employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, national origin, sex, sexual orientation, gender identity, disability, protected veteran status or any other factor protected by applicable local, state or federal laws. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking an Information Systems Security Officer to assist with the development, implementation, and maintenance of our information security strategy. The Information Systems Security Officer (ISSO) is responsible for supporting the execution, maintenance, and continuous monitoring of information system security controls for classified and unclassified systems within an aerospace and defense environment. This role supports compliance with DoD cybersecurity requirements including NIST SP 800-53, NIST SP 800-171, RMF, and CMMC Level 2. The ISSO works under the direction of the ISSM and serves as a contributing team member, providing hands-on system security support, assisting with authorization and accreditation activities, and supporting ongoing compliance monitoring. JOB DUTIES AND RESPONSIBILITIES • Assist with implementation and maintenance of security controls in accordance with NIST SP 800-53, NIST SP 800-171, RMF, and CMMC requirements., • Support system authorization activities including SSPs, POA&Ms, and security documentation., • Perform vulnerability tracking and support remediation efforts., • Support internal and external audits, assessments, and customer reviews., • Provide support for classified systems and SCIF environments under ISSM guidance., • Ensure adherence to classified system handling, marking, and access control requirements., • Assist with SCIF sustainment and compliance activities., • Assist in identifying, assessing, and documenting cybersecurity risks., • Support cybersecurity incident response, reporting, and remediation activities., • Participate in configuration change reviews to assess security impact., • Partner with IT, engineering, and program teams to support secure system operations., • Provide guidance to users on cybersecurity policies and procedures., • Support onboarding of systems and technologies into compliant environments., • Maintain accurate system security documentation., • Track compliance metrics and support audit readiness., • Contribute to continuous improvement of cybersecurity processes.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in Information Security, Computer Science, Engineering, or a related field, or equivalent practical experience., • Minimum of 2 years of experience in information system security, cybersecurity compliance, or ISSO-related roles within aerospace, defense, or government environments., • Experience supporting CMMC Level 2 compliance., • Experience supporting classified and unclassified information systems in a DoD or aerospace and defense environment., • Understanding of system authorization, continuous monitoring, and risk management processes., • Understanding of cybersecurity compliance and risk management principles., • Familiarity with SCIF operations and classified system security requirements., • Exposure to vulnerability scanning and assessment tools, security monitoring and logging tools, and GRC and compliance tools (e.g., eMASS or equivalent)., • Working knowledge of of NIST SP 800-171, NIST SP 800-53 and RMF concepts., • Experience with Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)., • Strong analytical, documentation, and communication skills., • Ability to operate independently while collaborating effectively with cross-functional teams., • Must be eligible to obtain and maintain a security clearance.PREFERRED EXPERIENCE, • Experience supporting NIST SP 800-171 or CMMC Level 2 compliance is preferred.

Job DescriptionLitigation Systems AnalystEmployment Type: Full Time, Mid-levelDepartment: Litigation Support CGS is seeking a Systems Analyst to join our team supporting a wide-ranging technical support initiative for a large Federal agency’s ongoing litigation efforts. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:- May work directly with Government staff and/or under the direction of the Contract IT Manager, Systems Manager, Senior Systems Analyst, or Lead Project Manager. Based on information gathered from the COR, Government Case Managers, and trial staff, defines system and project requirements.- Designs entire system to meet defined requirements. Works out the details of functional and design requirements, systems design, programming specifications, data elements, data validation specifications, data capture mechanisms, and data conversion procedures through discussions with Government staff and own superiors.- Translates the functional requirements into systems designs suitable for development of appropriate computer programs. Tests software, including preparation and use of sample data for testing purposes. - Makes presentations of findings, recommendations, and specifications in formal reports and in oral presentations. - Develops systems documentation required in the task orders. - Consults with Government staff and with other Contractor staff to ensure understanding of task objectives, identifies problems and suggests improvements. - Provides technical expertise, direction, and supervision to lower-level personnel.- May sometimes function as a technical supervisor or team leader for a project. - Reports on progress to Government staff and to superiors. - Provides user and technical documentation and training for systems developed. Qualifications:- Must demonstrate substantial, hands-on, successful experience in doing the work on the systems being used, usually at least three years of such experience. For example, if the work requires setting up interconnected Oracle databases in a UNIX environment, the Systems Analyst must have substantial experience in doing the work of setting up Oracle databases in a UNIX environment, including designing, implementing, troubleshooting, populating, maintaining, documenting, and training users on such systems. - Other systems environments and specific project requirements will call for other specific sets of technical skills. - Must demonstrate ability to analyze system requirements and translate those requirements into a coherent system design. - Requires broad knowledge of the Government's IT environments, including office automation networks, and PC and server based databases and applications. - Supervisory or team leader experience very useful. Requires excellent oral and written communication skills. - Experience in automated litigation support very helpful.- Assist CFPB with extracting data from media received by the Bureau, manipulating the data to conform to CFPB standard requirements, loading the data to the appropriate database platform, perform intake of data from outside parties, and review data and route for processing.- The Systems Analysts should have experience with Relativity, ReadySuite (Compiled/KLDiscovery) and I-Pro eCapture. Ideally, you will also have:An undergraduate degree strongly preferred; preferably in the computer science or information management/technology disciplines.It is preferred that onsite personnel have a Relativity Certified Administrator certification. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and delivering the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact: Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Outbound Sales Development Representative (MSP / IT Services) We’re a growing Managed Service Provider (MSP) looking for an Outbound Sales Development Representative (SDR) to generate new business opportunities for our managed IT services, cybersecurity, and cloud solutions. This role is focused on net-new logo acquisition through proactive outbound efforts and is ideal for someone who understands (or wants to specialize in) selling IT services to SMB and mid-market organizations. You’ll be the front line of our sales motion—opening doors, starting conversations, and qualifying prospects for long-term managed services relationships. Location: Austin, TX - In Office Employment Type: Full-Time What We Offer • Competitive base salary plus commission and performance bonuses, • Clear path to Account Executive or Senior Sales roles, • Training on MSP offerings, common buyer objections, and consultative selling, • Direct access to leadership and real influence on sales strategy Responsibilities: What We’re Looking For • Proactively prospect SMB and mid-market companies via cold calls, email, and LinkedIn, • Identify IT decision-makers (Owners, CEOs, COOs, IT Managers, Directors of Operations), • Qualify prospects based on MSP-relevant criteria (environment size, pain points, compliance needs, contract readiness), • Managed IT Services & Helpdesk, • Cybersecurity & Endpoint Protection, • Cloud Services (Microsoft 365, Azure, backups, DR), • Compliance-driven IT (HIPAA, SOC 2, CJIS, nonprofit/government, etc.), • Maintain clean, up-to-date activity tracking and pipeline notes in the CRM, • Collaborate with leadership to refine outbound messaging, vertical focus, and ideal client profile, • 1–3 years of outbound sales, SDR, or BDR experience (MSP, IT services, or SaaS preferred), • Comfortable with cold calling and objection handling, • Strong ability to translate technical services into business outcomes (risk reduction, uptime, scalability, cost control), • Organized, self-directed, and metrics-driven, • Experience working CRM-driven sales processes, • Coachable mindset with a desire to grow into a full-cycle sales role Nice to Have • Prior experience selling managed services or recurring revenue contracts, • Familiarity with MSP pricing models (per-user, per-device, bundled offerings), • Understanding of common SMB IT pain points: security gaps, unreliable vendors, aging infrastructure Systemverse is a leading provider of IT support services and technology solutions with headquarters in Austin, Texas. We specialize in providing outsourced IT Services: On-premises and remote, 24/7 remote helpdesk, IT consulting, cloud hosting, and cloud services. We become the client’s IT Department. We are a fast-paced and high-growth Information Technology consulting company. We perform high-level virtualization conversion projects, server migrations, network management/monitoring, business technology analysis, and day-to-day technical support. We do the implementations others can't do and are very aggressive in project success and completion. We are an equal-opportunity employer and value diversity at our company. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.