Trabajos heavy equipment mechanic en Yonkers, New YorkCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: We are seeking a skilled and safety-focused Tractor Trailer Chassis Mechanic to inspect, diagnose, maintain, and repair intermodal chassis, trailers, and related equipment. This position is responsible for ensuring equipment meets all applicable industry, regulatory, and company safety standards while maximizing fleet reliability, minimizing downtime, and supporting operational efficiency. The ideal candidate possesses strong mechanical aptitude, excellent troubleshooting skills, attention to detail, and the ability to work independently in a fast-paced environment. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform inspections, preventive maintenance, and repairs on chassis, trailers, and related equipment., • Diagnose and repair brake, suspension, axle, electrical, wheel-end, and structural systems., • Conduct annual, pre-repair, and post-repair inspections in compliance with AAR, IICL, FMCSA, DOT, and company standards., • Identify and document equipment defects using mobile inspection technology., • Perform quality control inspections and verify repairs are completed to standard., • Address DVIR deficiencies and ensure equipment is safe and road-ready., • Maintain accurate maintenance records and work orders., • Operate company vehicles safely and comply with all company and safety policies., • Support vendor audits, special projects, and other duties as assigned Requirements and Qualifications::, • High school diploma or GED required., • Minimum 6 months of mechanical, fleet maintenance, trailer, or chassis repair experience required., • Experience with intermodal chassis maintenance preferred., • Valid driver’s license with acceptable driving record., • IICL Chassis Inspector Certification preferred (or ability to obtain)., • Ability to obtain TWIC, ERailSafe, and other required site credentials., • Basic knowledge of DOT, FMCSA, and OSHA regulations. Physical Requirements • Ability to stand, bend, kneel, crawl, and work in confined spaces., • Ability to lift and move heavy equipment components, including truck tires., • Ability to work outdoors in varying weather conditions., • Ability to work in an environment with loud noises and strong odors., • Occasional travel may be required Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $28.30/Hr. Salary Range Maximum: USD $28.30/Hr.

Overview: Interstate Waste Services is looking for a CLASS A Full- Time Diesel Truck Mechanic Full Time Monday thru Friday. 1st shift. Maintain 10+ trucks. $35 to $52 per hour. Fantastic benefits package. Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process, • Conducts safety checks on vehicles and equipment during Safety Lane and PM's., • Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule, • Ability to learn and utilize brake inspection procedures and complete documentation daily, • Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body., • Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs., • Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner., • Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas., • Conducts repairs utilizing Factory Service Manuals., • Maintain high standard of Ethics and Dependability., • Follows all safety policies and procedures. Requirements and Qualifications::, • Ability to assist drivers with Pre/Post trip process, • Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc., • Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid, • Knowledge of tire inspections and air pressure adjustments, • Ability to support technicians in repair of lights, wipers, mirrors., • Ability to understand and use lubrication charts for waste trucks, • Ability to lubricate components on trucks as scheduled (training provided), • Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks., • Knowledge of all tools required to perform repairs and maintenance on vehicles., • Basic computer skills as required. OTHER JOB RESPONSIBILITIES: • Employees in this job classification must attend and participate in corporation sponsored training courses as assigned., • Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate., • Any additional job duties that may be assigned by the Supervisor. Special Considerations/Physical Work Requirements: • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job., • Exposure to chemical and residential waste., • Walking, Jogging, Twisting, Crouching, Lifting, • Sufficient stamina for steady work pace throughout the day, • Able to utilize all Personal Protective Equipment as mandated by company, • Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day, • Physically able to lift 50 to 75 pounds from the floor to waist height unassisted, • Physically able to lift 50 pounds from the floor to shoulder height unassisted, • Physically able to lift 50 pounds form the floor to overhead unassisted, • Physically able to push and pull 50 pounds unassisted, • Physically able to frequently (100-200 times) bend at the knees and waist Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $35.00/Hr. Salary Range Maximum: USD $52.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level A Fleet Mechanic/Technician is the top-tier technical expert in the shop, responsible for advanced diagnostics, complex repairs, and technical leadership across refuse trucks, heavy trucks/tractors, and support assets. This role sets the standard for safety, quality, productivity, and training, and partners with maintenance leadership to drive up time and regulatory compliance across the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other duties may be assigned. Advanced Diagnostics & Complex Repairs • Lead diagnosis and resolution of complex, intermittent, or chronic issues involving:, • Engine performance and emissions/aftertreatment (DPF, DOC, SCR, sensors, dosing systems)., • CAN-bus and multiplex electrical systems, electronic control modules, and communication networks., • Advanced hydraulics for refuse bodies, auto-load arms, high-pressure systems, and heavy truck power take-offs., • Plan and execute major component work including major engine reparis, transmission and differential R&R, frame-off repairs, and complex hydraulic rebuilds. Technical Leadership & Training • Serve as the go-to technical resource for Level B and Level C technicians; provide on-the-job training, coaching, and quality checks., • Assist in training on:, • Diagnostic software and tools., • New equipment technology, safety systems, and telematics., • Company maintenance standards, PM strategies, and repair procedures. Fleet Reliability, Compliance & Continuous Improvement • Analyze repeat repairs, failure trends, and PM findings; recommend changes to PM intervals, inspection checklists, or parts specifications., • Ensure all work complies with DOT, FMCSA, OSHA, BIC, DEP and environmental regulations, as well as state/local requirements in NY, NYC, NJ, and CT., • Perform and sign off on the most critical inspections (e.g., PDI, PM and Annual inspections, accident damage assessments, major repair QC). Operational & Customer Support • Support complex road calls and on-site repairs on the road, at transfer stations, MRFs, or customer locations throughout the NYC tri-state area., • Partner with Operations and Dispatch to minimize downtime, sequence repairs effectively, and prioritize critical units i.e. NYC dense-route refuse units, specialized collection assets., • Provide clear feedback to leadership on equipment condition, replacement candidates, and chronic issues affecting uptime or safety. Administrative & Leadership Duties (as assigned) • Help plan daily shop workload and allocate jobs according to technician skill level., • Assist in specifying parts, evaluating vendor options, and supporting warranty recovery efforts., • Support audits, safety inspections, and external regulatory reviews as the technical representative for the shop. Schedule: 8am to 4:30pm Requirements and Qualifications:: • High school diploma or GED required; additional technical training strongly preferred., • A minimum of 5 years of proven hands-on experience as a diesel mechanic as a diesel/heavy-equipment mechanic/technician, including advanced diagnostics and major component overhaul., • CDL Class B or A with air brake endorsement required or strongly preferred due to frequent road tests and movement of collection vehicles on public roads., • Demonstrated expert-level knowledge of:, • Heavy truck and refuse systems., • Refuse hydraulic, electrical, and powertrain systems., • Diagnostic software, scan tools, and OEM service information., • Proven track record of performing complex diagnostics and repairs independently., • Must provide own professional-grade tools required for diagnostic and repair work., • ASE Master Medium/Heavy Truck Technician or equivalent combination of ASE certifications (T series) and/or OEM advanced certifications preferred., • Possession of a valid driver’s license is required., • Experience in a lead or senior technician role in a refuse, municipal, or large private fleet environment preferred., • Experience with CNG/LNG, hybrid, or EV drivetrains for heavy vehicles preferred., • Strong communication skills and the ability to coach, influence, and drive standards across multiple shifts or locations preferred. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $36.50/Hr.

Overview: Action Carting Environmental Services/ Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customers and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Must be able to provide own tools., • A valid driver’s license is required., • Assists with service calls for breakdowns, • Preform other duties as assigned. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $24.70/Hr. Salary Range Maximum: USD $50.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of components. Additional responsibilities include: Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Performs all work in accordance with established safety procedures., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assists in the repair and adjustment of equipment., • Washes vehicles and equipment., • Conducts safety checks on vehicles., • Assists with service calls for breakdowns., • Perform other maintenance related work as required., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications::, • 3-5+ years’ experience as class A or B mechanic, • Computer diagnostic experience is required, • Prior experience from waste management industry or heavy equipment/yellow iron dealership experience is a plus, • Trade school or similar training is a plus, • Knowledge of safety procedures and practices Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $35.00/Hr. Salary Range Maximum: USD $52.00/Hr.

Job Description Position Overview: The position of the Mechanic is to maintain, diagnose and repair fleet vehicles, specializing on buses. The mechanic is responsible for repairing and troubleshooting mechanical and electrical issues, striving toward maximum reliability, functionality and safety. General Duties/Responsibilities: • Responsible for preventative maintenance such as changing tires, batteries, lights, controls, safety equipment, power steering, fluids, filters, etc., • Responsible for fleet condition by performing diagnostic testing repairs and rebuild of fleet vehicle components such as engines, transmissions, brake systems, electrical, mechanical, internal and external components, etc., • Responsible for scheduled preventive maintenance inspections, including body repairs, HVAC systems, electrical systems, steering, suspension systems, brake systems and drivetrain components., • Responsible for DOT inspections and document results to insure that vehicles meet N.Y. State DOT regulations., • Performs and analyzes diagnostic testing., • Responsible for operating vehicles while in strict compliance with Company policies, directives, and procedures and all traffic laws and regulations., • Conducts road tests to ensure fleet vehicles are operating in a safe and reliable manner, salt roads and participates in snow removal as needed., • Performs on-the-road repairs and road calls when necessary., • Effectively communicates with supervisors regarding equipment concerns and observations., • Utilizes various types of tools such as hand and power tools to perform repairs., • Maintains and repairs shop equipment as needed., • Responsible for performing all tasks in a safe manner, in an effort to reduce or eliminate accidents., • Interprets and applies knowledge from vehicle service manual and schematics to assist in the completion of repairs., • Performs system upgrades, campaigns and modifications on fleet vehicles as needed., • Participates in safety and educational training as required., • Assists fellow mechanics with repairs as needed., • Maintains equipment and work space safety and cleanliness Position Qualifications: • Required a minimum High School Diploma, GED or equivalent., • ASE certification preferred., • Minimum of 2 years’ experience as a mechanic preferred., • Must have and maintain an excellent Driver’s License, valid CDL preferred. CDL license required preceding the 5th month of employment as a mechanic., • Must have knowledge of technical and diagnostic equipment, including computer comprehension., • Must have a complete set of hand tools, in accordance with the department’s tools list., • Must be able to work any scheduled hours such as dayshift, nightshift, weekends, holidays, floater and overtime as needed., • Must have the ability to operate all mechanical equipment., • Must be able to document repairs, and diagnosis on assigned transit vehicles., • Must have a basic understanding of the design, adjustment, overhaul operation and maintenance of transmissions, heavy-duty engines and other fleet components., • Required to read schematics, maintenance manuals and interpret safety documents., • Must have excellent communication skills. Physical and Sensory Requirements: • Ability to climb stairs, reaches above shoulder level, walk extended distance, stand, kneel, sit for an undefined amount of time., • Ability to work in an environment with dust, fumes, exhaust, various noise levels, various temperatures, indoor and outdoor weather conditions for an undefined amount of time., • Ability to read, write and converse in English., • Ability to have discretion., • Ability to bend and lift without assistance up to 50 lbs., • Ability to push and pull a wide range of equipment, up to 100 lbs. without assistance., • Must be able to work in extreme heat, cold and in a damp environment., • Ability to physically and visually inspect equipment and fleet vehicles., • Ability to pass a DOT physical examination for Maintenance and 19A for part-time driving.

_ Join Our Community of Food People! BASIC PURPOSE To provide a safe and reliable fleet by performing preventative maintenance and proper repairs on all fleet equipment. COME WORK FOR US FOODS®! Ready to build a career with a company that’s leading the foodservice industry? We help YOU make it! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Schedule: Sunday - Thursday Nights 3:00 PM - 11:30 PM OT Available, not required Pay range is $39 - $42 hourly based on certifications and experience. Excellent Benefits starting DAY ONE! Including: $250 Quarterly tool allowance, that's $1,000 extra per year! Low-cost Medical, Dental, and Vision for Family Coverage. Paid vacation time, sick, and personal time. Employee uniforms provided. Employee referral program. $1,000 per referral 401K with FANTASTIC company match! Strong Safety Culture, newer equipment, and excellent local leadership and great place to work! Basic Purpose: Independently troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.). ESSENTIAL DUTIES AND RESPONSIBILITIES Perform preventative maintenance within company standards. Complete documentation of all repair orders, PM list and parts accountability. Handle road service calls; perform road rescue/transport equipment as needed. Keep track of assigned repairs by logging in and out of the software system. Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines. Maintain inventory and proper recordkeeping. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and Certifications. Performs other duties as assigned. MINIMUM QUALIFICATIONS: Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting ability using fleet maintenance software. Successfully demonstrated independent analytical and problem-solving skills. Must furnish own personal hand tools. Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet. Ability to read and understand technical and service manuals. Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills. Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision. Ability to adapt to changing organizational and operational needs. Computer and software experience. High school diploma or equivalent required. Must possess a valid driver's license. PREFERRED QUALIFICATIONS: JPRO software experience. Welding ability Knowledge with electrical schematics Basic Microsoft Excel and Word skills. Leadership experience or qualifications Valid Class A CDL license and DOT certification EPA 608 (Type 2 or Universal) certification Physical Requirements: JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting Occasionally 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law (for example: state minimum wage thresholds). The expected base rate for this role is between $39 and $42. This role may also receive overtime compensation and shift differential where applicable. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: _. #LI-ED1 *EOE – Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status*

Job DescriptionDescription: Gas Distribution Mechanic (A-Tech) • Prevailing wage varies between $70-$90 per hour (No Dues), • This Position supports Dutchess, Rockland and Orange Counties, in New York State, • Monday - Friday, 6:30 am – 2:30 pm with OT available, • Paid Training, • Medical, Dental & Vision Insurance, • 401k with company match, • Voluntary Short/Long Term Disability, • Life Insurance, • 9 Paid Holidays, • Accrued Vacation Time, • Sick Time, • $750 Referral Bonus Program, • $100 Annual Boot Voucher, • $100 Annual Rx Safety Eyewear Voucher Job Description: (A-Tech) is required to perform intensive physical construction labor duties such as hand digging while utilizing various tools and methods around all underground utilities for service and main work that is being performed. This will include but not limited to digging trenches and/or ditches, backfill and compacting in addition to skilled technical work that is related to the installation, maintenance, and operation of natural gas facilities which will be performed under the supervision of a gas foreman. In addition, as a A-Tech it is imperative to have proficient Safety skills, Quality workmanship and a Trustworthy reputation to provide the utmost degree of value in every task that you perform. Responsibilities: • Assist the crew with the construction and installation of natural gas mains and service lines utilizing various pipe joining methods., • Maintain a high level of expertise in the installation and repair of underground gas facilities., • Operate construction equipment such as, Dump Trucks, Loaders, Tampers, Air Compressors, and Fusion equipment., • Must maintain the cleanliness of all company owned and rented vehicles/equipment that you operate is required. In addition, all fluids need to be checked prior to operation and any fitting that requires grease needs to be checked and/or greased daily., • Thorough knowledge of the hazards associated with working around natural gas, heavy equipment at/near trenches and all the additional safety precautions., • The ability to navigate through the gas construction standards and O&Ms associated with each task that is being performed., • Must be willing to listen, learn and communicate effectively with the project manager, superintendent, foreman or other general laborers to complete each given task and overall job successfully., • Lift/carry materials and performs other duties involving the use of hand and power tools., • Must be able to hand dig with a shovel and dig bars., • Ability to work in all types of weather conditions., • The ability to travel to a new location upon request at any time throughout Central Hudson, Orange and Rockland and Pike territories., • Avoiding the use of a cell phone while working., • Adhere to the safety standards as defined by Precision Pipeline Solutions, safety standards and procedures., • Proper utilization of your Stop Work/Time Out Responsibility, this needs to be utilized when there is a change in work conditions that hasn’t been communicated, when equipment is improperly used, or even if there is a lack of knowledge for a task that is being performed., • Pass all NGA A-Tech qualifications that are required to perform each task. About Us: With Precision Pipeline Solutions in New Windsor, New York, you’ll be working for one of the nation’s fastest-growing private companies in the natural gas and electric utility contracting industry. Our mission at PPS is to be the premier provider of the development and implementation of single source, multi-dimensional, problem-solving techniques, driving the most effective SOLUTIONS to our utility clients. Our customers will choose us because of our diverse expertise, quality workmanship and reputation to provide the utmost degree of value. This job description is not intended to be all-inclusive. Employee may perform other related duties as delegated to meet the ongoing needs of PPS. Requirements: Qualifications: • Gas Mechanic (A-Technician): Minimum of 2 years gas experience, • Valid driver’s license for at least 1 year., • Must have the ability to safely operate a motorized vehicle, • High school diploma or equivalent, • Ability to climb, balance, bend, stoop, squat, kneel, crouch, crawl, reach, push and/or pull, twist and make repetitive hand movements. Ability to load, carry, lift, push and/or pull objects weighing up to 50 pounds. Sitting or standing for prolonged period of time required, • Effective communication skills and ability to speak clearly with team members, • Ability to understand and carry out oral and written instructions, • Ability to act with integrity and respect of personal and public property, • Ability to work in all types of weather

Job DescriptionAddresses jobs in US Army Mechanics. Tasked with keeping the Army's vehicles and machines in proper running order. MOSs ranges from heating and cooling mechanics to vehicle mechanics who service aircraft, wheeled and tracked vehicles, heavy equipment and watercraft. Why the U.S. Army: • Professional Growth: Engage in continued learning, training, and career advancement opportunities., • Diverse Opportunities: From combat medic specialists to medical officers, choose a role that fits your passion and expertise., • Community: Join a tight-knit community prioritizing camaraderie, service, and mutual support. Job Duties As a Wheeled Vehicle Mechanic, you’ll supervise and perform maintenance, repair, and recovery operations on wheeled vehicles and select armored vehicles that serve the Army in a variety of mission-critical roles. You’ll inspect, service, maintain, repair, replace, adjust, and test wheeled vehicles, material handling equipment systems, subsystems and components, and automotive electrical systems, including wiring harnesses and starting and charging systems.

Job Description Overview Travel Diesel Technician/Mechanic – Maywood, NJ. $40.00 - $46.00 hr | Weekly Pay | Full Benefits within 30 Days Amerit Fleet Solutions, a leader in fleet maintenance across the U.S., is hiring a skilled Travel Diesel Technician/Mechanic to join our team in Maywood, NJ. If you enjoy troubleshooting mechanical issues and keeping fleet vehicles running reliably, this is a great opportunity to grow your career with a stable national company. Shift: Monday - Friday (Flexible with some weekend travel required) * 100% Travel Involved * This is a Travel Tech position that requires Diesel and Automotive Experience. This role requires flexibility, as travel may be scheduled on short notice and can result in sudden changes to your work schedule. Candidates should be comfortable adapting to shifting priorities and working in fast-paced, dynamic, and sometimes ambiguous environments. Pay & Schedule Pay: $40.00 – $46.00/hour (based on experience) Pay Frequency: Weekly pay – every Friday Shift: Monday - Friday (Flexible with some weekend travel required) * 100% Travel Involved * Why Technicians Choose Amerit ✔ Weekly Pay – Reliable paycheck every Friday ✔ Benefits Start Fast – Medical, dental, vision within 30 days ✔ 401(k) Match – Plan for your future ✔ Paid Time Off – Vacation, holidays, and sick time ✔ Boot Allowance & Safety Gear Reimbursement ✔ Training Through Amerit University ✔ ASE Certification Reimbursement & Bonuses ✔ Employee Referral Bonuses (Up to $500) ✔ Career Advancement Opportunities Nationwide What You’ll Do • Perform preventive maintenance and repairs on medium to heavy duty fleet vehicles, • Diagnose mechanical and electrical issues, • Conduct inspections to ensure vehicles meet safety and compliance standards, • Accurately document repairs and complete work orders, • Maintain a clean and organized work area, including your tools and equipment, • Follow all safety procedures and company policies, • Collaborate with supervisors and team members to support fleet operations, • Non travel weeks will be spent building Mobile Service Center trucks and completing other projects, • Working closely with Fleet Managers and Senior Fleet Managers., • Perform other duties as required, • Up to 100% travel time What We’re Looking For • 5+ years’ of hands-on experience performing diesel vehicle maintenance and repairs, • Strong diagnostic and troubleshooting skills, • Valid driver’s license, • Ability to own and maintain the personal tools and toolbox required for the role, • Ability to work effectively both independently and as part of a team, • Willingness and ability to meet the physical demands of the position (detailed below), • Ability to successfully pass a DOT physical if required for the role Working Conditions This role involves working in a mobile and or shop environment that may include exposure to dust, diesel fumes, noise, and mechanical irritants such as oils and greases. Technicians must be able to perform essential functions that include lifting heavy objects, accessing tight spaces, and bending, stooping, crouching, or crawling as needed to complete repairs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Ready to Join a Growing Team? Apply today to join Amerit Fleet Solutions and build a career with a company that values safety, reliability, and skilled technicians. https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #DieselMechanic #NowHiring #DieselTechnicianCareer #MechanicJobs #DieselTechnician #NewTravelDiesel #MediumDuty #HeavyDuty #Ford

false false false EN-US X-NONE X-NONE H.O. Penn Machinery HIRING IMMEDIATELY Construction Equipment Mechanic Seeking Shop & Road Mechanics Bronx, NY Pay:$45.71 - $60.19/hour Benefits: • UP TO $25,000 SIGN-ON BONUS, • UNION Shop!, • Pension, welfare, annuity, vacation funds, & competitive employer contributions, • Medical/dental/vision insurance, • Paid company holidays Key qualifications: Experience in troubleshooting and repair of Heavy Construction Equipment, CAT preferred • Must be computer proficient to be able to run diagnostic software and prepare service communications, • Must have excellent verbal and written communication skills, • Must be able to troubleshoot technical problems, meet or exceed labor repair guidelines, possesses the ability to plan and efficiently complete assigned tasks, • CDL License preferred Responsibilities: Successfully provide service of recognized superior value • Troubleshoot problems, • Efficiently utilize resources to correct problems, • Document steps taken to correct problems Maximize the efficient use of service and repair processes to provide fast accurate service and minimize unnecessary expense • Plan proper repair procedures for efficiency, • Efficiently utilize tooling and technical resources, • Continually improve key processes, • Effectively communicate status of repair work with supervisor Successfully contribute towards building a culture of safety through completion of all safety initiatives and demonstrating safe work habits • Complete/attend all safety meetings, computer-based safety training, safety audits, and other safety training as assigned, • Work in a proactive, safe manner in compliance with all safety practices, policies, and training, • Immediately resolve and/or report all safety issues to supervisor, • Maintain a clean and safe work area in compliance with all Contamination Control Initiatives Qualifications: Experience in troubleshooting and repair of Heavy Construction Equipment, CAT preferred • Must be computer proficient to be able to run diagnostic software and prepare service communication, • Must have excellent verbal and written communication skills, • Must be able to troubleshoot technical problems, meet or exceed labor repair guidelines, possesses the ability to plan and efficiently complete assigned tasks, • CDL License preferred Physical Requirements: • Standing and walking (including on uneven surfaces), • Sitting, body rotation, and forward bending (in both sitting and standing positions), • Lifting up to 60 lbs. (machine or team lift for items over 50 lbs.), • Carrying up to 50 lbs. for short distances, • Push/pull tasks requiring up to 75 lbs. of force, • Climbing stairs and ladders (including non-standard access points), • Crawling, kneeling (low work), and working in awkward/tight positions, • Strong grip strength (up to 80 lbs. with both hands; up to 30 lbs. with one hand), • Hand coordination and overhead/extended reaching, • Operating equipment, machinery, foot pedals, and hand tools, • Outdoor work as required (exposure to weather and varying environments), • Wearing up to 20 lbs. of PPE, including flame-resistant clothing, welding helmets/shields, and ANSI-rated protective footwear as required We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, national origin, ancestry, age, marital status, citizenship, sexual orientation, gender or gender status, disability, genetic information, otherwise qualified disabled or veteran status, or any other protected class as designated by Federal, State and/or local law.

Forklift Field Service Technician / Mechanic.Come work for the largest equipment dealer in North America! Are you a Technician/Mechanic with auto, diesel, agricultural, material handling, lift truck or heavy equipment repair experience? If so, then we want you on our team!.Technicians are at the bac

Come work for the largest equipment dealer in North America! Are you a Technician/Mechanic with auto, diesel, agricultural, material handling, lift truck or heavy equipment repair experience? If so, then we want you on our team!.Technicians are at the backbone of our organization; therefore, we prov

Job DescriptionDescription: Are you a skilled mechanic or technician looking to take your career to the next level? Kinsley Power Systems is hiring Field Service Technicians to service stand-by generators throughout the Northeast. If you have experience with engines, electrical systems, or heavy equipment—especially in automotive, trucking, marine, or construction—you may already have what it takes to thrive in this role. We offer specialized training to help you transition into the power generation industry and build a long-term, rewarding career. Kinsley Power Systems, a family-owned business, has been a trusted leader in generator service, sales, and rentals for over 60 years. We’re committed to exceeding customer expectations in a workplace that’s both enjoyable and supportive—where your hard work is recognized and your growth is prioritized. Key Responsibilities and Preferred Experience: • Performing preventative maintenance and repairs on standby generator systems (Ranging from 8kW-1mW), • Troubleshooting, diagnostic testing, load-bank testing and start-ups on generators, • Preparing accurate quotes for repairs and completing/submitting work orders, • Previous experience working on residential or industrial generators, • Exceptional communication and customer service skills, • The ability to participate in an on call, rotating schedule, • Must provide your own tools (multi-meter, hand-tools, etc.), • Very safety focused with an OSHA 10 (or the ability to attain one), • Valid DOT Card (or the ability to attain one) and a valid driver’s license Benefits: • Competitive pay and PTO to keep your work-life balance in check, • Full health benefits package (Medical, Dental, Vision, etc.) + 401(k) with match, • Company-paid certifications and specialized training to grow your skills, • Company vehicle and gas card so you’re always ready to roll, • Uniforms provided, plus annual boot and uniform stipends, • Real advancement opportunities—grow your career with a team that wants to see you succeed, • A chance to work alongside some of the best technicians in the industry in a company that feels like family All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements:

Job Description WHO WE ARE Consumer Reports is an independent, nonprofit organization dedicated to a fair and just marketplace for all. CR is known for our rigorous testing and trusted ratings on thousands of products and services. We report extensively on consumer trends and challenges, and survey millions of people in the U.S. each year. We leverage our evidence-based approach to advocate for consumer rights, working with policymakers and companies to find solutions for safer products and fair practices. Our mission starts with you. We offer medical benefits that start on your first day as a CR employee that include behavioral health coverage, family planning and a generous 401K match. Learn more about how CR advocates on behalf of our employees. OVERVIEW CR's consumer product and service testing center, in Yonkers, New York, is the largest nonprofit educational and consumer product testing center in the world. It is here where, in any one of our 63 labs, we test, rate, and review 10,000+ products and services. As a Mechanic on the team, you will report to the Director of Facilities to focus on routine maintenance, responding to occasional off-hour emergency calls and ensuring safety regulations are met and all equipment is in good working order. This is an on-site position located in Yonkers, New York. This position is not eligible for sponsorship or relocation assistance. How You'll Make An Impact Our dedicated facility team is instrumental in maintaining and repairing our organization's headquarters so our testing and research experts can provide consumers with the information they need to make informed decisions. In this position, you will be responsible for: • Performing maintenance tasks, • Repairing equipment, machinery, and building, • Responding to "on demand" and timely staff requests, event set-ups / emergency calls Complying with safety regulations, and assisting with facility inspections., • Handling inventory management, • Overseeing the emergency evacuations of staff during fire or safety events, • Repairing and installation of furniture, fixtures, and equipment, • Upkeep of grounds & equipment ABOUT YOU You'll Be Highly Rated If: • You have the degree. A high school diploma or equivalent is required., • You have the experience. A minimum of 5-years experience in maintenance or a similar role., • You are a subject matter expert. You have knowledge of buildings, machinery, and equipment., • You are a jack-of-all-trades. You have basic carpentry, painting, plumbing and electrical skills., • You are self-motivated and a problem solver., • You value teamwork and collaboration. You'll Be One of Our Top Picks If: • You are certified in a trade or equivalent field., • You have experience working in a larger facility or multiple facilities. Physical requirements include those associated with trade work including working in an office environment, utilization of safe work practices, use of material handling equipment, ladders, lifts and tools & equipment typical for working on systems, ability to lift or move heavy equipment (up to 50 lbs), work outdoors in a variety of weather conditions typical to the region and the ability to operate large equipment including that used for grounds upkeep and snow removal. FAIR PAY AND A JUST WORKPLACE At Consumer Reports, we are committed to fair, transparent pay and we strive to provide competitive, market-informed compensation.The target salary range for this position is $69,074.30 - $80K. It is anticipated that most qualified candidates will fall near the middle of this range. Compensation for the successful candidate will be informed by the candidate's particular combination of knowledge, skills, competencies, and experience. Consumer Reports has three locations: Yonkers, NY, Washington, DC and Colchester, CT. We are registered to do business in and can only hire from the following states and federal district: Arizona, California, Connecticut, Illinois, Maryland, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Texas, Vermont, Virginia and Washington, DC. Consumer Reports is an equal opportunity employer and does not discriminate in employment on the basis of actual or perceived race, color, creed, religion, age, national origin, ancestry, citizenship status, sex or gender (including pregnancy, childbirth, related medical conditions or lactation), gender identity and expression (including transgender status), sexual orientation, marital status, military service or veteran status, protected medical condition as defined by applicable state or local law, disability, genetic information, or any other basis protected by applicable federal, state or local laws. Consumer Reports will provide you with any reasonable assistance or accommodation for any part of the application and hiring process.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Our team members continue to stay ahead of the technological curve through continuing education seminars, equipment training, installation of new technology and keeping up to date on the latest industry literature. Phoenix Mechanical partners with leading HVAC and plumbing companies throughout the U

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Enter and exit equipment by stepping and kneeling.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Operate forklifts and material handling equipment safely. Inspect equipment and report maintenance needs. Proven experience operating forklifts and warehouse equipment.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Operate forklifts and material handling equipment safely. Inspect equipment and report maintenance needs. Proven experience operating forklifts and warehouse equipment.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Experience utilizing various warehouse equipment, including, but not limited to, forklift, pallet jack, and shrink wrap machinery. Assist in warehouse equipment cleanliness. Maintain and handle large moving pieces of equipment in an efficient and safe manner.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Job Summary:Under the supervision of the Department Supervisor, uses equipment to create images using high frequency sound waves into specific areas of the patient's body to obtain cardiovascular diagnostic information.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Strong troubleshooting skills in electrical systems (high-voltage preferred), mechanical components, and basic PLC controls. Experience with electro-mechanical systems. Advanced troubleshooting of electro-mechanical and disinfection systems.

Take the next step as our new Costco Forklift Operator to operate forklifts to move pallets, load trucks, and organize warehouse inventory.Ensure compliance with safety and quality standards.Stay adaptable in a fast-paced environment.Perks include competitive pay, flexible shifts, hands-on training,

Comfortable with heights while on power equipment raising self, equipment, and merchandise up to 40ft in the air. As a Power Equipment Operator, you're an essential part of our behind-the-scenes teamkeeping things moving so customers get what they need, when they need it. Operate Equipment Safely: U

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

This role is primarily responsible for providing aviation ground support services to crew members by performing all facets of the ground handling operation, including, but not limited to: baggage/cargo handling, lavatory/potable water service and maintenance, ground support equipment operation, and

Job Description**: The Forklift Operator at FedEx is responsible for safely operating forklifts to move, load, and unload heavy items and pallets within the warehouse.

High Voltage Systems: A core requirement is understanding the risks involved with high voltage systems and the ability to safely power them down and work on them using appropriate personal protective equipment (PPE). The role requires the ability to diagnose mechanical suspension components and prog

Job Description**: The Forklift Operator at DHL is responsible for safely operating forklifts to move, load, and unload heavy items and pallets within the warehouse.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Move forward with Home Depot Forklift Operator and make a real impact in day-to-day operations.In this role, youll support the team with consistent work and clear follow-through, staying on schedule and working with care.Success comes from people who bring reliability, focus, and a willingness to le