Trabajos heavy equipment operator en Kansas City, MissouriCrear alertas

Job Description Pay: $27.00 - $35.00 Hourly Job Overview: We are seeking Heavy Equipment Operators with experience operating multiple types of construction heavy equipment, specifically graders, excavators, dozers, loaders, and skid steers to support Civil construction operations. We are looking to hire immediately (ASAP). Candidates must be willing and able to travel as required for local & nationwide projects. Travel is a mandatory requirement for this role and there are no exceptions. Safety is our top priority. This is a safety-sensitive position that requires a thorough understanding of equipment operation, jobsite hazards, and adherence to strict safety protocols at all times. Duties/Responsibilities: Operate heavy equipment including graders, excavators, dozers, and loaders. Perform mainline excavation, grading, backfilling, and related construction activities. Learn and strictly follow all safety regulations. Identify and avoid hazards (e.g., utility lines, workers, overhead obstructions). Locate underground services such as pipes or wires before work begins. Monitor equipment operations to ensure safety standards are met. Conduct routine inspections and perform basic maintenance on equipment. Use and operate hand and power tools safely. Work collaboratively with field crews and perform general labor when needed IS A MUST! Follow verbal and written instructions from supervisors and project leads. Carry out other duties as assigned in support of field operations. Required Skills/Abilities: Experience operating graders, excavators, dozers, and loaders is required. 2 to 5+ years of heavy equipment operating experience preferred. Prior experience in Heavy Civil construction is preferred (site grading, excavation, utilities, etc.). Must be willing and able to travel extensively for projects. Travel is a required condition of employment with no exceptions. Work collaboratively with field crews and perform general labor when needed IS A MUST! Valid driver’s license with a clean driving record. Ability to understand and follow verbal and written instructions. Must be able to lift up to 50 lbs and perform physical labor (kneeling, climbing, twisting, etc.). Must have reliable transportation. High School Diploma or GED required. Physical Requirements: Must be able to stand, walk, and operate equipment for extended periods. Must be capable of performing physically demanding tasks in various weather conditions, including extreme heat. Physical stamina to operate machinery during long shifts and travel for out-of-town projects. Compliance with company safety procedures, including daily safety briefings, proper PPE usage, and participation in safety audits. Must be able to pass a pre-employment background check & drug screening. Pay: Competitive hourly wage, based on experience (Paid weekly) Benefits: Competitive wages based on experience and qualifications. Opportunities for overtime and advancement within the company. Comprehensive benefits package, including health insurance, retirement plans, and paid time off. Training and development opportunities to enhance skills and advance career. Equal Opportunity Employment Statement: Your job is important—and so are you! Pacific West is an equal opportunity employer and does not discriminate against any employee or applicant for employment because of race, color, creed, religion, national origin, gender, sexual orientation, age, identity, genetic information, disability, or protected veteran status. We encourage all qualified candidates to apply. Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance

Launch Your Career with ConGlobal ConGlobal is hiring immediately for a key role in our global supply chain operations. Whether you’re looking to grow your career or gain new skills, this role offers paid training, competitive pay, excellent benefits, and long-term advancement opportunities. 📍 Location: 32880 West 191st Street Edgerton, Kansas 66021 💲 Starting Pay: $25.65, with a $0.75 differential for 2nd shift and $1.50 differential for 3rd shift are available after training and when 2nd and 3rd shifts are regularly worked. 🕐 Status: Full-Time | Immediate Hire 🕔 Schedule: Open availability required, including all shifts, weekends, and holidays. 🚗 IMPORTANT: A VALID DRIVER’S LICENSE IS REQUIRED FOR THIS POSITION 🚗 Applications without a valid driver’s license will not be considered. About the Role: As an Intermodal Equipment Operator (also known as a Terminal Operator), you'll play a critical role in the safe and efficient movement of shipping containers within our intermodal yard. You’ll operate specialized equipment—such as hostlers, cranes, top loaders, and side loaders—to load, unload, and relocate containers as part of our daily logistics operations. Your work ensures containers are handled accurately and safely, keeping freight moving on time. Key Responsibilities: Operate heavy equipment to load and unload shipping containers from railcars and trucks. Drive hostlers to position containers and chassis within the yard. Use top loaders, side loaders, and/or cranes to stack, move, and organize containers. Perform equipment inspections before and after use to ensure operational safety. Communicate with yard personnel and supervisors to coordinate moves and tasks. Maintain a safe work environment by following established protocols and procedures. Qualifications: • Previous experience operating heavy equipment or machinery in a logistics or industrial environment preferred, • Strong commitment to safety and attention to detail., • Ability to work outdoors in all weather conditions and perform physically demanding tasks., • Willingness to work flexible schedules, including weekends and holidays., • Basic communication skills and ability to work as part of a team., • Ability to lift up to 50lbs, • Ability to climb ladders and stairs both off and on railcars, • Valid driver’s license, • Must pass a pre-employment background verification, physical and drug screening, • The Federal Rail Administration sets and enforces safety regulations and standards for railroad operations. If applicable for the position you are applying to, and if you are offered the position, you will have to take and pass a drug screen., • Open availability Preferred Qualifications: Experience in intermodal or rail yard operations. Familiarity with container handling equipment such as hostlers, top loaders, or cranes. CDL or equipment certifications a plus, but not required. We offer competitive pay, medical/dental/vision benefits, 401(k), paid training, career advancement and more.

Job Info \n\n • Job Location: Kansas City, Missouri\n, • Route Type: Local\n, • Type of Assignment: Direct Hire\n, • Transmission Type: Automatic\n\n \n Job Requirements \n\n • Experience: 2+ years\n, • Handling: Light Touch\n\n \n Additional Information Local CDL A Flatbed Driver — $30+ Per Hour (DOE) + Overtime\n Kansas City, Missouri \n About the Position\n Our client is seeking a dependable Local CDL A Flatbed Driver for a home-daily position hauling heavy steel equipment. This role requires a strong work ethic, independent judgment, and the ability to work in a hot industrial environment. Pay & Schedule Details\n\n • Pay starts at $30 per hour, depending on experience.\n, • Overtime paid after 40 hours.\n, • Start time is 5:00 a.m. sharp with no exceptions.\n, • Typical workdays may last 10–12 hours.\n, • Home daily.\n\n Job Details\n\n • Route type: Local deliveries, with routes extending up to approximately 250 miles in any direction.\n, • Freight: Heavy steel equipment and oversized loads.\n, • Equipment: Newer 2023–2024 International and Freightliner day cabs.\n, • Handling: Light-touch work. Loads are generally handled by a forklift operator, while the driver assists with spotting as needed.\n, • Tarping is not required.\n\n Key Responsibilities\n\n • Operate a CDL A flatbed truck safely on local routes.\n, • Spot and strap loads as required.\n, • Secure loads appropriately before transport.\n, • Strap and unstrap freight at delivery locations.\n, • Coordinate with forklift operators during loading and unloading.\n, • Work independently while maintaining reliable and trustworthy performance.\n, • Perform job duties safely in a hot industrial environment.\n\n Minimum Requirements\n\n • 2+ years of recent, relevant, and verifiable driving experience.\n, • Valid CDL A license.\n, • Clean Motor Vehicle Record with no major traffic violations or preventable accidents in the last 3 years.\n, • Must meet all DOT and FMCSA requirements.\n, • Experience spotting and strapping loads.\n, • Ability to work independently and handle physically demanding job conditions.\n\n Preferred Qualifications\n\n • 6–12 months of experience hauling heavy steel equipment.\n, • At least 6 months of oversized-load experience.\n Why Work With TransForce\n TransForce connects professional CDL drivers with quality opportunities that match their skills, experience, and career goals. Join a team committed to dependable service, driver support, and finding the right local driving position for you. \n TransForce accepts applications on an ongoing basis. Apply now or call your recruiter today!!! 816-231-0403 Option 1 \n

Job Description We have been in business for over 25 years. We are looking for individuals who would like to continue to grow with our company. The ability to move up in position and pay is entirely up to the individual. Looking for motivated and responsible individuals that will show up every day and on time. Bash Excavating is looking to hire a new operator. We are a small company that does a lot of site work and site utilities. YOU WILL BE ASKED TO DO: • Set up lasers, • check grade, • cut grade, • final grade, • load trucks, • dig a clean and safe ditch, • install piping, • set precast products. YOU MUST HAVE: • Drivers License, • Vehicle, • Basic Knowledge of Grading, • Basic Knowledge of Site Utilities, • Pass a Drug Screening, • Mechanically Inclined, • 3 Years Experience in Operating. EQUIPMENT YOU WILL HAVE TO RUN: • Track loader, • Excavator, • Backhoe, • Dozer, • Roller, • Scrapers. Do you have any site utility experience? if so how many years? Have you ran heavy equipment before (this does not mean a forklift) if so how many years? Where did you graduate from high school? What is your birth date? Do you have your own vehicle? \nCompany Description Bash Excavating is a 3rd generation family owned business that is quickly growing. Bash Excavating is a 3rd generation family owned business that is quickly growing.

Job DescriptionDescription: Forklift/Hilo Operator – Steel Manufacturing The Diez Group Kansas City Location: Kansas City, Missouri Job Type: Full-Time Schedule: Multiple shifts; overtime, weekends, and extended hours as needed About the Position The Diez Group Kansas City is a tier-one metal parts supplier, warehousing, and logistics center serving the automotive industry. With more than 45 years of experience, we are committed to quality, on-time delivery, and competitive service. We are seeking a dependable Forklift/Hilo Operator to safely and efficiently move, stage, load, and unload materials throughout the facility. Key Responsibilities • Safely operate forklifts and other powered industrial equipment., • Follow safety policies and procedures., • Pick, move, sort, and stage products., • Load and unload materials., • Follow work instructions and SOPs., • Work with production employees, forklift operators, and supervisors., • Inspect forklifts before use and report maintenance or safety concerns., • Maintain a clean, organized, and safe work area., • Report unsafe conditions., • Assist with training team members when assigned., • Perform other duties as assigned.Requirements: Qualifications • High school diploma or equivalent preferred., • Manufacturing or warehouse experience preferred., • 2+ years of forklift/Hilo experience preferred., • Ability to obtain and maintain forklift certification., • OSHA forklift certification is a plus., • Strong written and verbal communication skills., • Basic math skills., • Alert, safety-conscious, and detail-oriented., • Ability to work independently and as part of a team., • Ability to lift, push, and pull heavy materials., • Ability to work in varying weather conditions., • Flexible to work overtime as needed., • Reliable attendance and adherence to company policies.Work Environment & Physical Requirements Heavy industrial steel manufacturing, warehouse, and logistics environment. PPE is required on the plant floor. Frequent standing, walking, forklift operation, and movement of equipment and materials. Ability to lift, push, and pull heavy materials and work in varying weather conditions. Schedule Full-time with multiple shifts. Overtime, weekends, and extended hours may be required based on business needs. Supervisory Responsibility No direct supervisory responsibilities. Why Join The Diez Group? Join a growing manufacturing and logistics team with more than 45 years of experience serving the automotive industry. We are looking for dependable, safety-focused team members who take pride in their work. Equal Employment Opportunity The Diez Group is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Job Summary: As a skilled Forklift Operator and Forklift Driver, you will be essential to our warehouse operations, responsible for the safe and efficient movement of pallets and materials. You will primarily focus on loading and unloading trailers, organizing inventory, and ensuring all movements are accurately documented. If you are a dependable individual with forklift experience and a strong commitment to safety and precision, we encourage you to apply! Our Story… So Far Founded in 1989 and headquartered in Dallas, Texas, PLA is a national supply chain solutions provider offering Pallet Management Services, 3PL Services, Reverse Logistics Services, and Freight Brokerage & Transportation Management Services, handling over 115 million pallets per year for over 1,500 customers. Now one of the largest pallet manufacturing and recycling companies in the United States, PLA has over 76 facilities, employing upwards of 3500 employees across 23 states, and is still looking for opportunities for growth, both organically and through acquisition. Work Schedule: • 4th Shift: 4:00 pm to 4:30 am (Friday -Sun) every other ThursdayPay Rate: $20.00 an hour Guaranteed Progression: 50-cent per hour increases at 90 days, 1 year, and annually thereafter for a total of 5 years, reaching the maximum rate at 5 years in this role. Here's What We Offer: • Daily Pay Option – Access your earnings before payday., • Weekly Pay – Get paid on time, every week., • PTO (Paid Time Off)., • Full Benefits: Medical, Dental, and Vision Insurance – 3 medical plan options through Blue Cross Blue Shield with low weekly premiums starting at $28.75., • Health Savings Account (HSA) – Company contribution up to $750 annually with tax-advantaged savings., • 401(k) retirement plan featuring up to a 4% employer match, eligibility the first of the month after 90 days, and access to a Financial Wellness Consultant., • Flexible Benefits – Multiple plan options to fit your needs and budget., • Prescription Drug Coverage – Low copays starting at $10 for generic medications., • FREE Life Insurance & AD&D – Basic coverage provided at no cost upon employment., • Vision Benefits – $10 eye exams and $150 frame allowance through Superior Vision by MetLife starting at $1.46 per week., • Dental Coverage – 100% preventive care coverage with MetLife plans starting at $5.76 per week., • Voluntary Short-Term Disability (STD) – Income replacement up to 60% of weekly covered earnings for a non-work-related injury or illness., • Employee Assistance Program (EAP) – Free and confidential support for work stress, grief, legal/financial issues, and more., • Additional Voluntary Benefits – MetLife Legal and Identity Theft Services and Pet Insurance with ASPCA., • LifeMart employee discounts (through ADP) on everyday stuff and larger purchases., • Dell Employee Purchase Program (EPP) discounts available for personal use.What You'll Be Doing: Reporting to the Supervisor or Manager, the Forklift Driver is responsible for operating and maintaining a sit-down forklift to move and organize pallets within a warehouse environment. As a Forklift Operator, your responsibilities will include: • Operating a sit-down (electric) forklift to move pallets in and out of trailers and designated areas., • Performing daily safety inspections of the forklift., • Refueling or charging forklift tanks as needed., • Verifying and completing load documentation (paper or digital)., • Moving pallets with accuracy and maintaining clear records., • Maintaining a clean, organized, and safe workspace., • Following all safety policies and procedures., • Adapting to new schedules, team structures, or tasks based on operational needs.What We're Looking For:, • Prior forklift experience is required., • Must be at least 18 years old., • Ability to lift 70–100 lbs throughout the day., • High School diploma or GED preferred., • Must pass PLA forklift certification (certification provided on-site if current is not transferable).Physical Requirements:, • Ability to stand, walk, bend, stoop, and lift for extended periods., • Capable of lifting and moving heavy materials regularly throughout the shift (e.g., lumber, pallets)., • Comfortable working in a warehouse environment that may include varying temperatures, noise, and dust., • Requires good manual dexterity and tactile sensitivity for operating tools, handling materials, and inspecting pallet quality., • Ability to hear and understand verbal instructions in a noisy environment, as well as alarms and equipment sounds., • Excellent vision (including close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus) for detailed work, reading measurements, identifying defects, and operating machinery safely.Work Environment:

Job Description Job Summary: As a skilled Forklift Operator and Forklift Driver, you will be essential to our warehouse operations, responsible for the safe and efficient movement of pallets and materials. You will primarily focus on loading and unloading trailers, organizing inventory, and ensuring all movements are accurately documented. If you are a dependable individual with forklift experience and a strong commitment to safety and precision, we encourage you to apply! Our Story… So Far Founded in 1989 and headquartered in Dallas, Texas, PLA is a national supply chain solutions provider offering Pallet Management Services, 3PL Services, Reverse Logistics Services, and Freight Brokerage & Transportation Management Services, handling over 115 million pallets per year for over 1,500 customers. Now one of the largest pallet manufacturing and recycling companies in the United States, PLA has over 76 facilities, employing upwards of 3500 employees across 23 states, and is still looking for opportunities for growth, both organically and through acquisition. Work Schedule: • 4th Shift: 4:00 pm to 4:30 am (Friday -Sun) every other ThursdayPay Rate: $20.00 an hour Guaranteed Progression: 50-cent per hour increases at 90 days, 1 year, and annually thereafter for a total of 5 years, reaching the maximum rate at 5 years in this role. Here's What We Offer: • Daily Pay Option – Access your earnings before payday., • Weekly Pay – Get paid on time, every week., • PTO (Paid Time Off)., • Full Benefits: Medical, Dental, and Vision Insurance – 3 medical plan options through Blue Cross Blue Shield with low weekly premiums starting at $28.75., • Health Savings Account (HSA) – Company contribution up to $750 annually with tax-advantaged savings., • 401(k) retirement plan featuring up to a 4% employer match, eligibility the first of the month after 90 days, and access to a Financial Wellness Consultant., • Flexible Benefits – Multiple plan options to fit your needs and budget., • Prescription Drug Coverage – Low copays starting at $10 for generic medications., • FREE Life Insurance & AD&D – Basic coverage provided at no cost upon employment., • Vision Benefits – $10 eye exams and $150 frame allowance through Superior Vision by MetLife starting at $1.46 per week., • Dental Coverage – 100% preventive care coverage with MetLife plans starting at $5.76 per week., • Voluntary Short-Term Disability (STD) – Income replacement up to 60% of weekly covered earnings for a non-work-related injury or illness., • Employee Assistance Program (EAP) – Free and confidential support for work stress, grief, legal/financial issues, and more., • Additional Voluntary Benefits – MetLife Legal and Identity Theft Services and Pet Insurance with ASPCA., • LifeMart employee discounts (through ADP) on everyday stuff and larger purchases., • Dell Employee Purchase Program (EPP) discounts available for personal use.What You'll Be Doing: Reporting to the Supervisor or Manager, the Forklift Driver is responsible for operating and maintaining a sit-down forklift to move and organize pallets within a warehouse environment. As a Forklift Operator, your responsibilities will include: • Operating a sit-down (electric) forklift to move pallets in and out of trailers and designated areas., • Performing daily safety inspections of the forklift., • Refueling or charging forklift tanks as needed., • Verifying and completing load documentation (paper or digital)., • Moving pallets with accuracy and maintaining clear records., • Maintaining a clean, organized, and safe workspace., • Following all safety policies and procedures., • Adapting to new schedules, team structures, or tasks based on operational needs.What We're Looking For:, • Prior forklift experience is required., • Must be at least 18 years old., • Ability to lift 70–100 lbs throughout the day., • High School diploma or GED preferred., • Must pass PLA forklift certification (certification provided on-site if current is not transferable).Physical Requirements:, • Ability to stand, walk, bend, stoop, and lift for extended periods., • Capable of lifting and moving heavy materials regularly throughout the shift (e.g., lumber, pallets)., • Comfortable working in a warehouse environment that may include varying temperatures, noise, and dust., • Requires good manual dexterity and tactile sensitivity for operating tools, handling materials, and inspecting pallet quality., • Ability to hear and understand verbal instructions in a noisy environment, as well as alarms and equipment sounds., • Excellent vision (including close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus) for detailed work, reading measurements, identifying defects, and operating machinery safely.Work Environment:

Job Description Founded in Kansas City, Missouri, in 1880, Clarkson Construction Company is a leader in delivering innovative solutions to some of the biggest infrastructure projects in the Midwest. Now in its sixth generation, family-owned Clarkson is one of the largest and most diverse contractors in the Kansas City region and proudly performs highway construction, site development and grading, bridge construction, parking garage construction, concrete paving, and airfield paving operations with its own labor and equipment forces. Position: Operator Reports to: Foreman or Superintendent Job Type: Full-time, Union Essential Functions / Key Responsibilities: • Operate heavy machinery and equipment such as excavators, bulldozers, loaders, graders, and cranes on heavy civil construction projects., • Perform daily equipment inspections to ensure operational safety and reliability., • Coordinate with the construction team to excavate, move, and grade earth, erect structures, and pave roads and highways., • Adhere to and promote safety protocols, ensuring a safe working environment for yourself and your team., • Identify and report potential safety hazards, concerns, or incidents immediately., • Communicate and work with team members to coordinate tasks and maintain a productive work environment., • Regular and punctual attendance. Qualifications and Requirements: • Experience operating heavy vehicles in a construction environment., • OSHA 10 certification., • Additional certifications for specialized equipment may be required (crane, boom truck)., • Ability and willingness to work outdoors in various weather conditions., • Ability to walk, stand, balance, stoop, kneel, crouch or crawl, sit, climb, work in challenging environments and on uneven surfaces, and perform physically demanding tasks, including lifting heavy materials (up to 50 pounds)., • Ability to remain alert and see, hear, and respond to team members and the surrounding environment in highly safety sensitive working conditions and near large heavy civil equipment and/or live traffic., • High school diploma or equivalent., • Excellent teamwork, communication skills and ability to follow instructions., • Reliable transportation to and from construction sites., • Commitment to maintaining a safe working environment for yourself and others. To learn more about the Operating Engineers Local 101 and related apprenticeships, please visit www.iuoelocal101.org. Clarkson Construction is an Equal Opportunity Employer (EOE). We provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disabled status or any other legally recognized status entitled to protection under applicable federal, state, or local law.

Job DescriptionDescription: Scrap Management Industries is looking for a Material Handler/Equipment Operator to add to our growing team. This position requires the expert, safe operation of various types of heavy equipment to move, organize, stack, load and unload processed and unprocessed scrap metal. The ideal candidate will have grapple and magnet experience. Requirements: • Operates heavy equipment in compliance with the company operating safety policies and procedures, • Moves and positions raw materials and finished components with use of material moving equipment, • Conducts routine equipment inspections and preventative maintenance on equipment; maintains accurate records in the form of pre and post shift inspections, • Monitor and maintain all production equipment, i.e. material handlers, front end wheel loaders, track excavator with shear attachment, semi tractors, rail car mover, skid steer, balers, shears, etc., • Properly follow company and OSHA safety procedures, • Expected to report any defects or needed repairs to supervisor immediately, • Willing to cross-train in other positions and assists other employees as needed, • Ensure a clean, safe and orderly workplace; clean and prepare sites by removing debris and possible hazards, • Follow instructions from Shredder & Maintenance Superintendent, • Must be able to identify and sort various scrap metal commodities, • Safely categorize and stack scrap metal material, • Attend all scheduled training and meetings, • All other duties as assigned Education and Experience: The minimum level of education and experience required to perform the job at a satisfactory level. • High school diploma or equivalent, • Minimum of 3 years previous experience operating heavy equipment, • Expert knowledge of heavy-equipment operating principles Knowledge, Skills, and Abilities: The minimum level of knowledge, skills, and abilities to perform the job at a satisfactory level. • Ability to adhere to scheduled hours with dependability and consistency, • Ability to adapt to a constantly changing landscape, • Ability to work well under the pressure of meeting demands and deadlines, • Excellent professional presence and work ethic, • Must be able to identify scrap metal commodities, • Ability to work in a fast-paced, non-stop environment, • Ability to understand and carry out written and oral instructions, • Ability to operate equipment under varying working conditions, • Working knowledge of hazards and safety precautions common to heavy equipment operations, • English (preferred); Bilingual a plus Safety: Environmental or atmospheric conditions commonly associated with the performance of the functions of this job. • Strictly adhere to all health, safety, and environmental standards, • Follow all safety guidelines and protocol, including wearing of all PPE, • Adhere to all local, state, OSHA, and environmental regulations

Job DescriptionVeolia has acquired Clean Earth. As Clean Earth completes its integration into Veolia, recruiting and hiring for this role is being managed in partnership with the Clean Earth talent acquisition team.Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. In this role, the Environmental Technician II will perform routine and frequent manual and heavy labor tasks to properly treat, store, pack, move and/or dispose of hazardous waste in accordance with environmentally responsible and cost-effective practices along with Clean Earth policies and procedures. Primary Responsibilities (Essential Functions): • Supervise and operate fork trucks and other heavy equipment when properly trained to move materials for storage / loading and off-loading / production., • Collecting samples of inbound waste for laboratory analysis.Complete required paperwork in accordance with our practices and procedures., • Perform other reasonably related tasks as assigned by management., • Performs other reasonably related duties as assigned by management., • Separate and pack materials for transport and disposal. Requirements: • Must be 18 years of age or older., • 1+ years related work experience., • Ability to operate equipment, including a forklift and pallet jack., • Have the ability to read, write and speak in English., • Ability to wear company provided personal protection equipment including eye protection, steel toed shoes, hard hat, gloves, Tyvek coveralls, and respirator. Preferred Qualifications: • 2+ years of experience sampling and receiving hazardous waste. Benefits: Comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, tuition reimbursement, paid volunteering and more. In addition, commencing no later than January 1, 2027, benefits package will include participation in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law

Job Description Get to Know Us With a company built on family—by family—it’s no surprise that working here is so much more than just putting on a hard hat and work boots. At Crossland, you join a group of Real Builders who care about bringing long-lasting facilities to our clients and providing the best culture and opportunities for our employees. With our own in-house education program, you’ll find the resources, support, and training necessary to put you on the path to success. Benefits + Paid Time Off When you want the best team, you offer benefits accordingly. Competitive pay, a family atmosphere, and great benefits are part of our culture of celebrating and appreciating our people. • Health, Dental and Vision Insurance, • Life Insurance, • 401(k) retirement plan with guaranteed match, • Flexible Spending Account, • Paid time off, • Holiday pay, • Paid education opportunities Perks • Company Apparel, • Safety Incentives for Field Employees, • Milestone Anniversary Gifts, • Company Events (Picnics and Christmas Party), • Diaper Bundle Program for new parents, • Flu Shots, and so much more! About the Role We are looking for candidates with a minimum of 3-5 years of experience operating heavy equipment machinery. This position can be physically demanding at times and includes long seat hours. Some travel may be necessary, and you must have your own transportation. If you're a hard worker, love being outdoors, and enjoy a team atmosphere and camaraderie, this is the job for you! Essential Responsibilities Performs any combination of the following duties on construction projects, usually working in a utility capacity and by transferring from one task to another. • Operating heavy equipment including excavators, dozers, scrapers, backhoes, rollers, blade and skid steer., • Operate routinely used tools and equipment., • Perform routine inspection and preventive maintenance on assigned equipment., • Load and unload equipment from vehicles and trailers., • Complete required paperwork, forms and records as required., • Coordinate machine actions with crew members in response to hand or audio signals., • Ability to work without close supervision once directed on task., • Obeys and follows all safety rules on the job site and encourages others to do the same., • Maintains a good relationship with co-workers and works well with others to accomplish a task. EOE M/F/D/V

Job Description POSITION TITLE: Laser Operator (2nd Shift) REPORTS TO: Industrial Supervisor POSITION SUMMARY: The function of the Laser Operator is to ensure that all laser machines at Martinrea are maintained and in proper safe working order. Load parts, select program, run program. Preferrred forklift certified. RESPONSIBILITIES Must work in accordance with Health & Safety regulations, Company rules, policies and procedures Must use or wear equipment, protective devices or clothing as required by the company Ensure Machine Set-up meets production and quality goals Training and monitoring of all operators in the correct and safe use of equipment Ensure all machines are operating at maximum efficiency and utilization Physically maintain laser machines and equipment at Martinrea Must ensure all paperwork and logs are completed prior to shift end Follow Machine Safety Guidelines, ensure proper lock out procedure are followed at all times Maintain proper Martinrea housekeeping standards Responsible to provide own tools as required to fulfill duties On call for emergencie All other duties as assigned by Supervisors and Managers Abide by all Company policies including, but not limited to Health & Safety, Quality & Environmental Systems, HR policies and Martinrea Employee Handbook COMPETENCIES (Job Knowledge/Skill, Education and related experience) • High degree of Mechanical aptitude and complete understanding of Mechanical and Electrical procedures, • Complete understanding and knowledge of lock out procedures, • Ability to read drawings, blueprints, schematics and manuals, • Ability to incorporate technical reports, • Vast knowledge of laser equipment required, • able to use measurement tools WORKING CONDITIONS Working in a plant environment Frequent distractions and interruptions Multiple demands, challenging, fast paced, team orientated environment, can be noisy Lift up to 50lbs EFFORT - PHYSICAL/MENTAL DEMANDS • Constant standing, walking, bending and lifting (light to heavy), ocassional climbing, • Warm/Cold temperatures, • Communication with Supervisors and Management, • Overtime as required PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS • Steel toe safety shoes, • Safety glasses, • Ear Plugs, • Gloves

Job DescriptionAbout Accu-Crete Since our founding in 1980, Accu-Crete has been dedicated to providing the best service for our clients nationwide through building concrete foundations in a timely, cost-effective manner. Accu-Crete began by specializing in post-tension slab-on-grade multi family apartment foundations and has easily become a leading developer of the slab on grade process. Over the years, we’ve evolved to reflect the needs of our customers and their products. By streamlining the entire process through the use of drive-through animations, parametric cost-estimating system, multi-dimensional models and resource-loaded schedules, we ensure direct communication between our architects, clients, and laborers. We work directly with some of the industry’s leading engineering firms to provide a valuable, cost-effective engineering service. We specialize in: design build concrete services, value engineering, pre-construction services, and our product types include slab on grade including structural and PT SOG concrete frames including light and heavy podium. We are an equal opportunity employer and pride ourselves on recruiting the best and the brightest, then providing a great work environment in which to build a long-term career. About You 5+ years of experience in construction project management, with focus on multi-family or commercial projects. A degree in Construction Science, Construction Engineering or similar or/ equivalent work experience is required. Candidates with proven experience to manage multiple projects at once will be given priority. Software proficiency in the following is expected: Outlook, Excel, Bluebeam, Adobe, Procore, PlanGrid, AutoCAD, and Primavera P6/MS Project/other Construction scheduling software. Experience requirements: • 5+ years working with structural concrete (Tilt-up, post-tension, podium deck, foundational pouring, pre-cast, and other concrete forms), • Contractor and vendor selection and oversight, • Scope coverage, • Contract negotiation, • OSHA training and safety, • QC and schedule accountability, • Material& equipment procurement, • Change orders, • RFI support, • Field daily reports, close out About the Job The Assistant Project Manager (APM) provides overall management direction for structured concrete projects. The APM is responsible for establishing project objectives through effective planning and monitoring all construction activity in collaboration with the project Superintendent. They are responsible for production results of the project, as well as safety on the project. We offer a competitive base salary, a strong bonus program, and a generous benefits package. This APM position is for projects/work sites in Kansas City, KS. Duties (including but not limited to): Responsible for Pre-Construction Duties: Works with Project Manager to plan project sequencing, equipment, manpower, etc. Examine the scope of work and reviews contract drawings and project specifications to fully understand the project requirements. Coordinates Project Start-Up Process: Facilitates project operations start-up. Provides input on project staffing plans. Schedules and facilitates pre-con meetings with the Superintendent, client representative(s), testing lab representative(s), subcontractors, and suppliers. Collaborates with the Project Team to: • Maintain weekly a detailed/critical path project schedule to support construction process, updated on a weekly basis (at minimum), • Collect production data daily by project specific work breakdown structure (WBS), • Submit all material tickets for the project, • Communicate project needs to greater Project Management team, • Develop shop drawings when required Responsibilities (including but not limited to): Project Management Support: • Coordinate Architectural, Structural, and Civil drawings, • Review project constructability with Superintendent and PM, • Create RFIs for discrepancies and maintain RFIs in Procore, • Collect and distribute three-week lookahead schedules from superintendents, • Distribute latest drawings to Rebar, PT and formwork drafters through Procore, • Review project specifications and submit all required items for approval, • Review and submit Rebar, PT and Formwork Shop drawings, • Update drawings in the Office Trailers and save latest drawings in Procore, • Prepare stressing log and review stressing results, • Collect and distribute formwork stripping letters, • Submit Project specific Safety Program(s), Operator Licenses, Rigging and Spotter Licenses, OSHA cards and Quality control plan(s) as required, • Update Concrete Breakdown by Element and by Pour, • Review weekly labor chart, MH/CY and $/CY Estimates and Actuals, • Collect & compile signed field change directives to submit to the PM, • Complete price change requests based on signed change directives, • Review timesheets and coding for field personnel, • Fill out concrete and gravel usage forms and attach delivery tickets while recording both estimated amounts and actual amounts, • Collect and code all other delivery tickets and submit them to AC Office, • Prepare accident reports and submit them to GC and AC offices in a timely manner, • Support the Superintendents with the daily reports., • Prepare bill of lading from the job sites to the vendors (equipment rental) / AC yards, • Collect and compile third party concrete break results., • Check all deliveries against bills of lading and report any/all discrepancies Yard Support: • Assist in the scheduling of material and equipment delivery dates, per Superintendent and Yard Manager, • Assist the Yard Manager in procuring and tracking equipment status (small tools and machinery) Physical Requirements of the Job: Ability to communicate orally in person and over devices with peers, vendors, contractors, clients, and construction workers is crucial. Regular use of mobile devices (talking or texting) and email for communication is essential and required for everyday tasks. Hearing and vision within normal ranges is essential for normal conversations, to receive ordinary information, and prepare, inspect, or review documents. A pre-employment drug test is required for all personnel. Daily job duties and responsibilities require the ability to: remain in a stationary position, move about an office and/or work site efficiently, and move between locations (office, work sites, vendors, etc) frequently. Physical requirements include: the ability to ascend and descend ladders and stairs on occasion, regular exertion of up to 10 lbs. of force, occasional heavy lifting (30+ lb. / 13.6+ kg), and good manual dexterity for use of common office equipment (e.g., computers, mobile devices, copiers).

Job Description Excavator Operator Pickles Plumbing, Electrical & HVAC – Kansas City Metro Area Join a Growing, Family-Owned Company! Pickles Plumbing, Electrical & HVAC is looking for an experienced HVAC Service Technician to join our growing team! We are a family-owned and operated company that believes in taking care of our employees while providing exceptional service to our customers. If you're a motivated technician who takes pride in quality workmanship and outstanding customer service, we'd love to meet you. What You'll Do Operate excavators, skid steers, backhoes, and other heavy equipment Dig and excavate trenches for underground plumbing and sewer lines Install and repair water lines, sewer lines, and underground plumbing Locate and safely expose existing utility lines Prepare trenches for proper pipe installation and grading Remove dirt, concrete, and other materials during excavation Backfill and compact trenches after plumbing work is completed Assist plumbers with underground plumbing installations and repairs Work around residential and commercial properties Read and follow excavation plans, measurements, and utility layouts Maintain and perform basic inspections of equipment Help load, unload, and transport equipment and materials Keep work areas clean, organized, and safe Follow OSHA and job-site safety procedures Communicate with plumbers, supervisors, and other crew members Occasionally assist with general plumbing/construction tasks as needed Qualifications 2+ years of experience operating excavators, backhoes, skid steers, or similar equipment Experience digging trenches and underground lines Experience with sewer, water, plumbing, or underground utility work Ability to safely operate heavy equipment around existing utility lines Experience with pipe installation or underground construction Ability to read basic measurements, grades, and layouts Valid driver's license and reliable transportation Ability to work outdoors in varying weather conditions Ability to lift, carry, and move heavy materials Strong awareness of job-site safety Ability to work independently and as part of a crew • Competitive hourly pay plus commission opportunities., • Take-home company vehicle., • Fully stocked work van., • 100% employer-paid health insurance for employees., • Paid vacation and holidays., • Ongoing training and career advancement opportunities., • Year-round work with a steady schedule., • Supportive, family-oriented work environment., • No private equity ownership—we're locally owned and focused on our employees and customers. Why Pickles? At Pickles Plumbing, Electrical & HVAC, you're more than just an employee—you become part of our family. We invest in our team, reward hard work, and provide the tools and support you need to build a successful career. If you're looking for a company that values honesty, integrity, and quality workmanship, we'd love to have you on our team. Apply today and grow your career with Pickles Plumbing, Electrical & HVAC!

Job DescriptionDescription: Scrap Management Industries is looking for a Material Handler/Equipment Operator to add to our growing team. This position requires the expert, safe operation of various types of heavy equipment to move, organize, stack, load and unload processed and unprocessed scrap metal. The ideal candidate will have grapple and magnet experience. Requirements: • Operates heavy equipment in compliance with the company operating safety policies and procedures, • Moves and positions raw materials and finished components with use of material moving equipment, • Conducts routine equipment inspections and preventative maintenance on equipment; maintains accurate records in the form of pre and post shift inspections, • Monitor and maintain all production equipment, i.e. material handlers, front end wheel loaders, track excavator with shear attachment, semi tractors, rail car mover, skid steer, balers, shears, etc., • Properly follow company and OSHA safety procedures, • Expected to report any defects or needed repairs to supervisor immediately, • Willing to cross-train in other positions and assists other employees as needed, • Ensure a clean, safe and orderly workplace; clean and prepare sites by removing debris and possible hazards, • Follow instructions from Shredder & Maintenance Superintendent, • Must be able to identify and sort various scrap metal commodities, • Safely categorize and stack scrap metal material, • Attend all scheduled training and meetings, • All other duties as assigned Education and Experience: The minimum level of education and experience required to perform the job at a satisfactory level. • High school diploma or equivalent, • Minimum of 3 years previous experience operating heavy equipment, • Expert knowledge of heavy-equipment operating principles Knowledge, Skills, and Abilities: The minimum level of knowledge, skills, and abilities to perform the job at a satisfactory level. • Ability to adhere to scheduled hours with dependability and consistency, • Ability to adapt to a constantly changing landscape, • Ability to work well under the pressure of meeting demands and deadlines, • Excellent professional presence and work ethic, • Must be able to identify scrap metal commodities, • Ability to work in a fast-paced, non-stop environment, • Ability to understand and carry out written and oral instructions, • Ability to operate equipment under varying working conditions, • Working knowledge of hazards and safety precautions common to heavy equipment operations, • English (preferred); Bilingual a plus Safety: Environmental or atmospheric conditions commonly associated with the performance of the functions of this job. • Strictly adhere to all health, safety, and environmental standards, • Follow all safety guidelines and protocol, including wearing of all PPE, • Adhere to all local, state, OSHA, and environmental regulations

Job Description Are you passionate about working with your hands and transforming raw steel into precision-cut parts? Do you take pride in doing things right the first time? At Trinity Products, we’re not just cutting steel pipe — we’re shaping the backbone of America's infrastructure. And the best part? You’ll be part of a 100% employee-owned company where every shift you work is an investment in your own future. Exciting opportunity to operate our new CNC Pipe Profiling Machine. This is a 1st Shift position (Monday - Friday, 7:00am - 3:30pm) at our Kansas City location. As a CNC Pipe Profiling Operator, you'll safety set-up and operate a plasma pipe profiling system. The Operator loads and verifies approved cutting programs, positions and processes steel pipe, monitors machine operation and cut quality, verifies finished components against drawings and work instructions, and maintains accurate material and production records. What You'll Do: • Safely operate, inspect, clean and perform operator-level maintenance on the plasma pipe profiling system., • Read and understand work orders, fabrication drawings, cut lists, mechanical drawings and other technical documents., • Verify pipe diameter, wall thickness, grade, length, identification, orientation and quantity before cutting., • Select, load, verify and execute the correct approved CNC cutting program for the assigned work order., • Verify machine setup and cutting parameters and make authorized adjustments to support safe operation and acceptable cut quality., • Use proper material-handling techniques and approved equipment to load, position, support and unload steel pipe and finished components., • Follow proper procedures for machine start-up, setup, operation and shutdown., • Ability to operate the CNC machine through its graphical interface; select, load, verify and execute approved cutting programs and make authorized process adjustments as required., • Monitor machine operation and identify abnormal cutting conditions, consumable wear, material movement or equipment problems., • Inspect finished components for dimensions, profiles, holes, bevels, markings and overall cut quality using appropriate measuring tools., • Maintain material identification and traceability throughout the cutting process and properly identify nonconforming material or parts., • Maintain accurate production, scrap, remnant and material-use records as required by company procedures., • Comply with all safety guidelines and protocols and maintain a clean and organized work area. Requirements: • High school diploma or equivalent qualifications required., • 1-3 years of experience operating CNC, automated cutting, fabrication or similar industrial equipment., • Ability to read and understand fabrication drawings, mechanical documents, dimensions and work instructions., • Strong attention to detail with a quality- and safety-focused attitude., • Basic computer skills and the ability to learn CNC and CAD/CAM machine interfaces., • Working knowledge of shop math, measurements, fractions, decimals and tolerances., • Ability to safely work around and handle large, heavy steel pipe using approved material-handling equipment such as an overhead crane., • Plasma cutting, pipe fabrication, structural steel, CNC profiling or similar automated fabrication experience preferred, but not required., • Analytical and math skills to understand drawings, verify machine parameters, measure dimensions and confirm part tolerances and quality requirements., • Mechanical aptitude and willingness to develop a strong working understanding of machine operation, routine maintenance and consumable replacement., • Problem-solving and communication skills to identify and respond to drawing, material, quality, program and machine issues., • Ability to assist with training and improving the skills of new and existing qualified machine operators. Founded in January 1979 by Robert Griggs and a team of visionary partners, Trinity Products began as a bold dream fueled by hard work, innovation, and an unwavering entrepreneurial spirit. From those humble beginnings, we’ve grown into a national leader in steel and steel fabrication—thanks to our commitment to continuous improvement and delivering exceptional value to our customers. Today, Trinity is proud to be a 100% Employee-Owned Company, with nearly 280 employee-owners who are directly invested in our success. With six strategic locations across the country and a broad, flexible product line, we proudly serve a wide range of industries and markets nationwide. At Trinity, we believe our strength lies in our people. Our employee-owners are not just workers—they’re stakeholders, innovators, and the driving force behind our continued growth. If you’re looking to join a company where your contributions truly matter and your voice can shape the future, Trinity Products is the place for you. Why You'll Love Working Here: • Employee-Owned – Your hard work builds your future. As an employee-owner, you're not just part of the team—you have a stake in the company's success., • Shift Premium Pay – Get rewarded for working 2nd shift with competitive shift differentials., • Outstanding Benefits Package – Enjoy comprehensive benefits including health, dental, vision, 401(k) with match, paid time off, and more—we invest in your well-being on and off the job., • Modern Facility & Equipment – Work in a well-maintained environment with top-tier tools and machines., • Career Growth Opportunities – We promote from within and offer continuous learning and development., • Supportive Team Culture – You’re not just a number here—you're part of a tight-knit crew that values teamwork, safety, and craftsmanship.

Job Description CNC Machine Operator Company: Dimensional Stoneworks Job Type: Full-Time Schedule: Monday–Friday, 8-hour shift Work Location: In Person Position Overview Dimensional Stoneworks is seeking a skilled, dependable, and motivated CNC Machine Operator to join our stone fabrication team. The ideal candidate has hands-on experience operating CNC machinery, preferably in a stone fabrication environment, and takes pride in producing precise, high-quality work. As a CNC Machine Operator, you will be responsible for setting up, operating, and maintaining CNC equipment used to cut, shape, machine, and finish natural and engineered stone. This position works in a fast-paced production environment where the ability to prioritize tasks, meet deadlines, adapt to changing priorities, and maintain consistent quality is essential. The successful candidate will have strong attention to detail, mechanical aptitude, and a commitment to safety, quality, productivity, and teamwork. This is an excellent opportunity for an experienced CNC operator who wants to build a long-term career in the stone fabrication industry. Key Responsibilities • Operate CNC machinery to cut, shape, drill, profile, polish, and finish stone materials according to project specifications., • Set up, calibrate, and adjust CNC equipment to ensure accurate and consistent production., • Read and interpret shop drawings, CAD drawings, work orders, and production specifications as required., • Verify dimensions, tooling, machine settings, and material prior to machining., • Monitor machine operation and make adjustments as needed to maintain quality and production standards., • Inspect completed pieces for accuracy, finish, and overall quality., • Identify and troubleshoot machine or production issues and perform routine maintenance as needed., • Work efficiently and maintain productivity while meeting established production schedules and deadlines., • Communicate effectively with fabrication, design, and installation teams to ensure projects are completed accurately and on schedule., • Maintain accurate production and quality records as required., • Minimize material waste through proper machine setup, material utilization, and efficient production practices., • Maintain a clean, organized, and safe work area., • Follow all company safety policies, operating procedures, and required PPE guidelines., • Adapt to changing production priorities and deadlines in a fast-paced work environment., • Willingness to take on additional responsibilities and perform other duties as requested to support the team and company’s operational needs. Qualifications & Skills • Previous experience operating CNC machinery is required; stone fabrication experience is strongly preferred., • Experience working with materials such as marble, quartz, quartzite, porcelain, or other natural and engineered stone is a plus., • Ability to read and interpret shop drawings, and work orders as required., • Strong understanding of CNC machine setup, operation, tooling, and basic troubleshooting., • Excellent attention to detail and commitment to accuracy., • Strong mechanical aptitude and problem-solving skills., • Ability to work independently while also contributing effectively as part of a team., • Dependable, punctual, and able to maintain a consistent production schedule., • Ability to work effectively in a, • Ability to prioritize multiple tasks and adjust to changing production needs., • Ability to maintain a high standard of quality while working efficiently and meeting deadlines., • Ability to adapt to changing priorities and take on additional responsibilities as needed., • Willingness to learn new equipment, processes, and fabrication techniques., • Ability to safely lift, move, and handle stone and other heavy materials with appropriate equipment and assistance. Physical & Work Environment Requirements • Ability to stand and work for extended periods during an 8-hour shift., • Ability to safely lift and maneuver materials and perform repetitive physical tasks., • Work is performed in a fast-paced stone fabrication and manufacturing environment where priorities and production demands may change throughout the day., • Work may involve exposure to noise, water, machinery, and varying temperatures., • Must follow all required personal protective equipment (PPE) and workplace safety procedures., • Must be able to maintain focus, accuracy, and safe work practices while working at a steady production pace. What We Offer • Competitive pay based on experience and qualifications, • Health insurance, • Dental insurance, • Vision insurance, • Simple IRA, • Paid time off, • Holiday pay, • Opportunities for career advancement and professional growth, • Supportive, team-oriented work environment Schedule • Full-time, • Monday–Friday 7:00am – 4:00pm Additional hours may be required based on production demands, project deadlines, and business needs. Work Location In person About Dimensional Stoneworks At Dimensional Stoneworks, we take pride in delivering high-quality stone fabrication with precision, craftsmanship, and attention to detail. We are looking for team members who share our commitment to quality, productivity, safety, and teamwork and who want to grow with a company that values skilled workmanship and dependable performance. If you have CNC experience, thrive in a fast-paced environment, take pride in your work, and are looking for an opportunity to grow with a skilled fabrication team, we encourage you to apply.

Job DescriptionProcurement and Expediting Manager - Lake City Microgrid and CHP LC-ERP-13 | Lake City Microgrid and CHP | Awarded project recruiting WORK LOCATION: Hybrid planning possible; regular Independence site presence and travel as project needs require REQUISITION: LC-ERP-13 DUTY LOCATION: Lake City Army Ammunition Plant, Independence, Missouri REPORTS TO: ERP Project Manager EMPLOYMENT: ERP full-time, project-based position CSS CAM LCAT: 442 - Senior Business Manager (provisional classification) PLANNED OPENINGS: 1 REQUIREMENT BASIS: Project execution and staffing plan; qualifications verified against assigned work About ERP and the Project Energy Resilience Partners, LLC (ERP) is a tribally led SBA 8(a) federal contractor advancing energy resilience and mission assurance. ERP was awarded the Lake City Army Ammunition Plant Microgrid and Combined Heat and Power construction contract in Independence, Missouri. ERP is recruiting its prime-contractor team to direct and oversee the work. The project integrates a 15 MW dual-fuel turbine CHP system, HRSGs and steam interfaces, natural-gas and backup propane systems, 12.47 kV distribution and substations, SEL-based protection, microgrid controls, cybersecurity, operator training, and full commissioning at an operating industrial facility. The contract allows 1,014 calendar days after notice to proceed. Recruiting begins now; assignment and site mobilization depend on the required bonds, Government NTP, access, and role-specific onboarding. Position Summary Own ERP procurement register, buyout dates, vendor document milestones, manufacturing surveillance, FAT dates, shipment and receipt. Integrate RICHARD purchase orders and OEM risks into forecast and baseline schedule. What You Will Do • Build the long-lead register for turbines, HRSGs, switchgear/MSEs, SEL, MGCS, fuel and security equipment., • Verify submittal approvals, quotations, supplier commitments, manufacturing dates, factory tests, logistics and storage plans., • Coordinate RICHARD buyout, supplier expediting, alternate evaluation, and ERP procurement approval limits., • Escalate late vendor drawings or fabrication slippage with documented critical-path impact., • Reconcile receipts, inspections, invoices, warranties and spares with the equipment-in-place register.Minimum Qualifications, • Eight years industrial equipment procurement, expediting and commercial bid evaluation, including long-lead generation or power-distribution packages., • Industrial EPC equipment procurement and commercial bid-tab experience., • Ability to validate a supplier milestone independently and maintain an auditable procurement file., • Ability to meet the applicable installation access, safety, information-handling, and assignment requirements.Preferred Qualifications, • Power-generation OEM and MV switchgear procurement., • Import or heavy-haul logistics and factory surveillance., • Relevant military, Tribal, apprenticeship, or nontraditional experience that demonstrates equivalent capability where the role permits it.What Success Looks Like An accurate long-lead register with committed dates and actionable mitigation for slippage. Field, Travel and Employment Conditions • Work at an operating industrial installation may involve outdoor weather, uneven ground, stairs or ladders, construction noise, PPE, and coordination around ongoing plant operations. The actual essential functions will be reviewed for the assigned role., • Project needs may include scheduled outages, factory testing, startup travel, or occasional weekend and alternate-shift work, subject to employer policies and approved site plans., • Final assignment follows approved work packages, qualifications, installation access, and project authorization. Personnel who handle FCI/CUI must use only approved systems and procedures., • ERP will provide the approved compensation range, benefits, and any travel terms through its normal hiring process. The internal CSS compensation category is not a promise of a particular rate., • ERP welcomes qualified Turtle Mountain Band of Chippewa Indians members, local Missouri candidates, veterans, military spouses, people with disabilities, and applicants from all backgrounds. Hiring decisions follow applicable law and the requirements of the actual employer.Application Materials, • Resume with month/year dates, employers, responsibilities, and relevant project types., • Current licenses, training, trade qualifications, or certifications needed for the assigned work, with expiration dates if applicable., • A concise example of comparable work, availability to work in Independence, and earliest possible start after NTP. References may be requested later. ENERGY RESILIENCE PARTNERS, LLC | BUILDING ENERGY SOVEREIGNTY AND MISSION RESILIENCE Powered by JazzHR FXgiZBRURn

Job DescriptionState Tractor Trucking is seeking an experienced Excavator Heavy Equipment Operator Hours Monday - Friday - Day shift Starting pay $30 an hour (depending on experience) Overtime available Details - Moving rock and aggregate operating Sany Excavator, loading rock crusher. Must apply online at www.statetractor.com Weekly pay every Friday Benefits after 60 days Retirement plan offered after 90 company matches up to 3% 80 hours PTO after one year of employment 7 paid holidays a year

Job Description: Missouri Organic Recycling is seeking a safety-focused Heavy Equipment Operator to join our team.In this role, you will be responsible for operating wheel-loaders and skid-steers while helping to maintain a clean, organized, and customer-friendly recycling yard.USD per hour Key Resp

Job DescriptionDescription: Machine Operator – Steel Manufacturing The Diez Group Kansas City Location: Kansas City, Missouri Job Type: Full-Time Schedule: Monday–Friday; overtime, weekends, and extended hours as needed About the Position The Diez Group Kansas City is a tier-one manufacturing supplier of blanked steel and aluminum material serving the automotive industry. We are seeking a Stacker/Press Operator to safely and efficiently set up, change over, operate, and troubleshoot press equipment while maintaining production and quality standards. Key Responsibilities • Set up, change over, and safely operate press machines., • Read and follow work instructions, blueprints, and specifications., • Prepare workstations and equipment for production., • Perform die changeovers and select appropriate materials., • Troubleshoot setup, tooling, and equipment issues., • Make adjustments to dies, springs, pins, hold-down bolts, and other equipment., • Operate presses to punch and form parts according to specifications., • Lubricate materials and parts as required., • Complete required production and quality paperwork., • Perform first- and last-part inspections and required quality checks., • Maintain production, quality, and housekeeping standards., • Report material shortages, equipment issues, and production concerns., • Perform rework as needed., • Identify problems proactively and take appropriate corrective action., • Follow all safety and company policies.Requirements: Qualifications • High school diploma required., • 1–2 years of relevant manufacturing experience preferred., • Previous press or warehouse experience preferred; training may be available for motivated candidates., • Ability to read and interpret blueprints, schematics, and work instructions., • Ability to perform basic mathematical calculations for machine setup and production., • Ability to obtain and maintain certifications for powered industrial equipment, including hilo, crane, and manlift., • Professional crane operator certification is a plus., • Strong communication and problem-solving skills., • Ability to identify problems, determine root causes, and communicate corrective actions., • Excellent coordination, focus, and attention to safety., • Strong attendance and work history., • Self-motivated, dependable, and willing to take initiative., • Ability to work independently and as part of a team.Work Environment & Physical Requirements Heavy industrial steel manufacturing environment. PPE is required on the plant floor. Position requires frequent standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing stairs. Frequent lifting and movement of heavy materials, including items over 50 pounds, may be required. Ability to operate powered industrial equipment such as hilos, cranes, and manlifts is required. Schedule Full-time, Monday–Friday. Overtime, weekends, and extended hours may be required based on business needs. Supervisory Responsibility No direct supervisory responsibilities. Why Join The Diez Group? Join an experienced manufacturing team supporting automotive production through quality steel and aluminum processing. We are looking for dependable, safety-focused team members who take initiative, value quality, and take pride in their work. Equal Employment Opportunity The Diez Group is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Aerotek - JobID: JP-005851907 [Heavy Equipment Operator / Loader Operator] As an Operator at Aerotek, you'll: Operate equipment of various sizes and weights safely and efficiently; Be responsible for various day-to-day functions, from set-up and loading to operating machinery with efficiency; Ensure

Field Service Engineer II/III LOCATION: Field-based within priority service regions, including: • New England (Hybrid & Boston-based), • Northeast (PA/NY/NJ) EMPLOYMENT TYPE: Full-Time TRAVEL: 75-100% COMPENSATION: $85,000-$110,000 DOE BENEFITS: Medical, Dental, Vision, PTO, 401(k), and additional company-sponsored benefits. Company Description A provider of precision measurement and dimensional metrology solutions, delivering equipment, calibration, repair, software support, and technical services to manufacturers and laboratories throughout North America. About the Job Independently perform calibration, repair, troubleshooting, installation, and service support for advanced dimensional metrology equipment in the field. This role supports complex installations, commissioning activities, preventive maintenance, service contract execution, customer training, and advanced software implementation while serving as a senior technical resource within the field organization. Successful candidates are highly independent problem-solvers who can diagnose complex technical issues, support customers in demanding environments, and provide technical leadership across multiple product families. This role is expected to contribute beyond day-to-day service execution by mentoring junior engineers, supporting process improvements, and helping strengthen overall field service capabilities. What You’ll Do • Troubleshoot, diagnose, and repair advanced dimensional metrology equipment, • Perform complex mechanical, electrical, and software troubleshooting, • Lead installation, commissioning, and system validation activities, • Install, configure, and troubleshoot measurement software, • Perform software upgrades and advanced system configuration, • Execute preventive maintenance and repair activities under service contracts, • Prepare service plans, including parts identification and technical readiness, • Manage repair parts usage and ensure preparedness for field assignments, • Provide operator training and technical guidance to customers, • Communicate technical findings, recommendations, and service outcomes to customers, • Support advanced customer discussions and technical demonstrations, • Serve as a senior technical resource during escalated or high-complexity service events, • Provide technical guidance during challenging service situations Qualifications Required: • 3+ years of field service, repair, or closely related technical experience, • Strong troubleshooting skills across mechanical, electrical, software, and system-level issues, • Advanced installation and commissioning experience, • Strong customer service and communication skills, • Demonstrated ability to work independently in a travel-heavy field service environment, • Ability to serve as a senior technical resource and mentor less-experienced engineers, • Ability to travel extensively (75%+) Preferred: • Associate degree or equivalent technical experience, • Experience supporting dimensional metrology equipment or other precision technical systems, • Experience with CMMs, vision systems, or similarly complex precision measurement platforms, • Experience with installation, commissioning, preventive maintenance, and field diagnostics, • Familiarity with measurement software, calibration workflows, and structured service execution, • Experience supporting semiconductor equipment, laboratory instrumentation, automation systems, medical equipment, or other complex technical platforms, • Interest in helping build, improve, and scale field service processes and team capability

SA Recycling LLC in Missouri is seeking a Heavy Equipment Crane Operator to safely operate hydraulic grapple or magnetic cranes to lift, sort, load and unload scrap metal and debris for processing.

Date: Nov 12, 2026 Location: Kansas City, MO, US Company: Snow Creek Ski Area Shift Type: Winter Seasonal 2026/2027 Create Your Experience of a Lifetime! Come work and play in the mountains! Whether it's your first-time seeing snow or you were born on the slopes, joining our team means discovering (or re-discovering!) a passion for the outdoors while building lifelong connections with teammates and guests from around the world. With 40+ resorts across 3 continents, you can join our team for a season or stay to build a career. From day one, you'll receive some of the highest compensation rates in the industry, free pass(es) along with free ski and snowboard lessons, 40% retail discounts, the chance to grow through Epic Service - our leading training and development experience, and wellness benefits to fuel your success. Hiring for our seasonal positions occurs on a rolling basis. Applications will be accepted until December 15th or until the positions are filled (whichever is first). Employee Benefits Ski/Mountain Perks! Free passes for employees, employee discounted lift tickets for friends and family AND free ski lessons MORE employee discounts on lodging, food, gear, and mountain shuttles 401(k) Retirement Plan Employee Assistance Program Excellent training and professional development Referral Program To Learn More, please review the Benefits Eligibility Summary Job Summary: The Snowmaking Manager will provide strategic direction and leadership to build a strong team to execute snowmaking during production season (October-January) and maintain and upgrade equipment the remainder of the year (February-September). In partnership with the Director of Mountain Operations and VP of Mountain Operations, this role will develop and execute capital projects in compliance with company and USFS guidelines and regulations. This position will also ensure adherence to all safety protocols, financial budgets and leadership development of the entire snowmaking team. Job Specifications: Starting Wage: $25.00 /hr - $35.20 /hr Employment Type: Winter Seasonal 2026/2027 Shift Type: Full Time hours available Minimum Age: At least 18 years of age Housing Availability: No Job Responsibilities: Responsible for the safety, training, and management of snowmakers, winter snowmaking operations and summer snowmaking maintenance and construction at all levels. Will oversee the proper installation and maintenance of snowmaking equipment. Lead winter snowmaking operations and summer construction projects from start to finish with assistance from the Mtn Ops Manager. Problem solve various issues to ensure an efficient and safe operation year-round. Must be proactive and look for improvements in all aspects of the operation on a consistent basis. Responsible for ensuring compliance with all mandated policies, programs in addition to managing operating and capital budgets. Responsible for the identification and development of talent and leadership on the snowmaking team. Responsible for the engagement, moral and welfare of the snowmaking team. Provide excellent and effective communication to departments across the mountain and resort, treating other departments as your 'internal guests'. Job Requirements: Required: High School diploma, Bachelor's degree preferred or equivalent work experience Previous snowmaking or mountain operations experience Minimum three years supervisory experience Must have a valid driver's license Must have general computer skills, including Microsoft Office & VRI Software programs preferred Must be able to read, speak, write and understand English required Preferred: Previous heavy equipment and/or cat operating experience Previous electrical and mechanical (pumps, motors, compressors) experience highly preferred Previous snowmaking installation experience Previous knowledge of XXX Mountain Competent snowmobile operator Previous experience budgeting at departmental level Physical Requirements: Advanced skier/snowboarder required Able to withstand inclement weather conditions for extended periods of time. Able to work and supervise day, grave shifts, weekends depending upon need. Able to lift and carry 75 pounds in a rugged alpine environment. Must be able to stand, walk and ski in boots for long portions of your shift. The expected pay range is $25.00 /hr - $35.20 /hr. This is the pay range we reasonably expect to pay for this position. Individual compensation decisions are based on a variety of factors. In completing this application, and when submitting related documentation, applicants may redact information that identifies their age, date of birth, and/or dates of attendance at or graduation from an educational institution. We follow all federal, state, and local laws including restrictions on child/minor labor. Minors hired into this position will not be asked or permitted to engage in any activities restricted to adult workers. Vail Resorts is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other status protected by applicable law.

Corman is currently seeking a Heavy Equipment Operator to join our team in Kansas City, Kansas. Perform advanced equipment maneuvers, including lifting, rerailing, and stabilizing derailed railcars or heavy components. Perform preventative maintenance on heavy or specialized equipment.

About the PositionWe are seeking a dependable CDL-A Heavy Equipment Operator & Field Technician to support specialized field operations, heavy equipment handling, and transportation activities. Preferred Experience3+ years of experience operating heavy equipment, including:BackhoesBulldozersExcavato

Are you looking for stable work as a Heavy Equipment Operator II with benefits that provide financial security for you and your family? Aspiring to advance in your heavy equipment career at a site that prides itself on employee safety? Searching for a company that prioritizes its employees' well-bei

Heavy Equipment Operators work closely with other team members and follow safety protocols to ensure efficient project completion while minimizing risks. Proficient in operating the minimum required equipment at an expert level based on site operations, which may include: Tipper, ADTs, Compactors, V

We are seeking an experienced Heavy Equipment Operator to work on our construction projects. Operate heavy equipment, including bulldozers, excavators, and loaders, to move materials, earth, and other heavy objects. High school diploma or equivalent; vocational training in heavy equipment operation

PerksCompany ApparelSafety Incentives for Field EmployeesMilestone Anniversary GiftsCompany Events (Picnics and Christmas Party)Diaper Bundle Program for new parentsFlu Shots, and so much more!About the RoleWe are looking for candidates with a minimum of 3-5 years of experience operating heavy equip

Skid Steer OperatorRecycling company, located in Kansas City, Mo. Job title: Skid Steer Operator. Machine Operator Job Description Summary: Material handling, sorting, machine operation.

Health, Dental and Vision InsuranceLife Insurance401(k) retirement plan with guaranteed matchFlexible Spending AccountPaid time offHoliday payPaid education opportunitiesPerksCompany ApparelSafety Incentives for Field EmployeesMilestone Anniversary GiftsCompany Events (Picnics and Christmas Party)Di

Kansas City, a CRH Company, is looking for a Heavy Equipment Operator in Bonner Springs, Kansas, United States. This position involves operating heavy, off-road type equipment found in quarry applications and providing manual labor at ground level, including welding. The job is outdoors, weather rel

Job Description Keep communities flowing Picture this: after a heavy rain, you’re the professional who ensures Kansas City’s underground infrastructure stays clear and safe. With a Class B CDL and a commitment to craft, you’ll operate jetting, vacuum, and CCTV trucks to clean and inspect pipelines—protecting roads, homes, and businesses. Your impact • Deliver essential field services in a construction environment, • Inspect and clean underground utilities using high-pressure jetting and vacuum systems, • Deploy CCTV cameras to assess pipeline condition and pinpoint issues Tools of the trade, • Class B fleet: Vacuum Trucks, Jetting Trucks, CCTV Trucks, and Combo Trucks, • Hydroblaster and vacuum truck technology Career pathway, • On-the-job training with a clear growth track, • Opportunities to gain industry-recognized certifications, • Advancement based on skill and initiative What you’ll need, • Class B CDL (Tanker and Air Brakes preferred), • High school diploma or equivalent; minimum age 21, • Ability to work in confined spaces and perform physical tasks (squat, crawl, lift up to 100 lbs), • Comfort traveling as needed (most work is local; 25%–50% travel overall), • Proficiency: Current CDL License, • Nice to have: Construction and/or OSHA certifications Compensation & benefits, • $25–$29 per hour, depending on experience, • Per diem of $1,260 weekly while traveling, • Comprehensive medical and dental coverage, plus 401(k), • Significant overtime available, • Paid time off Where you’ll work Kansas City, MO and nearby project sites. Physical & field essentials • Work outdoors in a construction setting, • Assist with setup and breakdown of inspection and cleaning equipment Also called Utility Inspector, Jetter Operator, Jet-vac Operator, Combo Truck Operator Compliance • Pass a Background check/MVR check/drug test