Trabajos industrial maintenance en Buffalo, New YorkCrear alertas

Job Description The Role General Motors has needs for qualified Industrial Electrician Journeypersons. Working under minimal supervision, the skilled trades Electrician Journeyperson is responsible for layout, installation, repair and preventative maintenance of complicated electrical equipment and circuits, troubleshooting and technical expertise on control systems. Primary Responsibilities: • Follow established safety procedures according to OSHA standards and company procedures, • Responsible for the maintenance and repair of electrical equipment, • Analyze and troubleshoot electrical malfunctions in equipment and related components, diagnosing and correcting the problems quickly to avoid production delays, • Perform electrical preventative and corrective maintenance on all plant equipment, • Promote teamwork and show a willingness to work with other departments, • Participate in continuous improvement activities, • Read and interpret drawings and wiring schematics, • Demonstrate strong problem-solving skills Interested individuals must meet the following minimum qualifications: • At least six (6) years of related experience as an Electrician or a U.S. Department of Labor Certificate of Completion in the Electrical trade., • Must be able to satisfactorily complete the General Motors hiring process requirements which includes comprehensive assessments, drug testing, and a background check, • At least 18 years of age, • Eligible to work in the United States, • Must be willing to work flexible shift hours and day, afternoon, or night shift as well as overtime hours daily, weekends and holidays on those shifts with little notice, • GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU NEED OR WILL NEED GM IMMIGRATION SPONSORSHIP TO WORK OR TO REMAIN EMPLOYED AT GM (e.g., H-1B, TN, STEM OPT, etc.)., • If you are a current GM employee operating under a collective bargaining agreement, please contact your local HR/LR for employee placement opportunities., • This position may be filled with a Journeyperson or Journeyperson In Training, the compensation ranges for a JIT include ($38.90-$45.38) or Journeyperson rate of $46.31. Certificates/credentials and scoring in interview will determine your status and pay. Physical Requirements • Quick response to safety instructions, alarms, and signals are a must, • Ability to work and stand for extended periods, • Comfortably wear personal protective equipment, • Navigate a busy environment, • Bend, twist, kneel, crouch, and reach, • May need to lift or carry materials weighing up to 50 lbs. depending on department, • Occasional sitting during certain tasks, • Drive mobile equipment when needed General Motors UAW hourly employment offers a very competitive compensation and benefit package. An annual incentive payout is also available, as qualified. Relocation and travel expenses will be the responsibility of the applicant. Please note – per the labor agreement between GM and the UAW, GM may share information and documentation relating to the credentials of applicants for this position (e.g., resumes, journeyperson cards, interview notes, certificates, etc.) with UAW personnel who have a need to know as part of their role on the UAW skilled trades team. About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day – individually and collectively – to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being–at work and at home–so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting _. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit _. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, _ us or call us at 1-800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Job Description The Role General Motors has a need for qualified Mechanical Journeypersons (Pipefitter). You will work under minimal supervision with a high level of independent judgement and problem solving. You should be flexible enough to take on and tackle multiple job assignments in a shift. Preferred Experience Includes: • Experience with planned maintenance systems and predictive technologies, • Experience with industrial robotics, automation, and conveyance systems Primary Responsibilities: • Follow established safety procedures according to OSHA standards and company procedures, • Maintain, dismantle, repair, and replace mechanical and hydraulic components (e. g. bearings, seals, details, carriers, etc.) on industrial machinery such as shafting, motors, generators, air compressors, engines, pumps, cylinders, gears, couplings, linkages, ball screws, high speed CNC spindles, coolant systems and filters, and combustion equipment and valves, • Layout, assemble, fabricate, maintain, and repair piping systems, • Use various hand or power tools for measuring, cutting, threading, grooving, bending, soldering, assembling, joining, and installing pipes, valves, and fittings, • Read and interpret blueprints for the mechanical operation and assembly of conveyor systems, material handling systems, robots, and other automation, • Operate mobile equipment (e.g. forklifts, vertical lifts, cranes), • Determine loading requirements to rig equipment and material for lifting, • Set up and operate conventional or computer numerically controlled (CNC) machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes, • Fabricate punches, tools, steel rule tools and t-sets to exact specifications, • Plan sequences of operations for fabricating tools or assemblies using blueprints, sketches, or models, • Determine quality of finished products, ensuring defect-free parts, by verifying dimensions, alignment, and clearances for conformance to specifications using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators Interested individuals must meet the following minimum qualifications: • At least six (6) years of related experience in a Mechanical trade (millwright, pipefitter, toolmaker, machine repair) or a U.S. Department of Labor Certificate of Completion in a Mechanical trade (millwright, pipefitter, toolmaker, machine repair)., • Must be able to satisfactorily complete the General Motors hiring process requirements which includes comprehensive assessments, drug testing, and a background check, • At least 18 years of age, • Eligible to work in the United States, • Must be willing to work flexible shift hours and day, afternoon, or night shifts as well as overtime hours daily, weekend and holidays on those shifts with little notice, • GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU NEED OR WILL NEED GM IMMIGRATION SPONSORSHIP TO WORK OR TO REMAIN EMPLOYED AT GM (e.g., H-1B, TN, STEM OPT, etc.)., • If you are a current GM employee operating under a collective bargaining agreement, please contact your local HR/LR for employee placement opportunities., • This position may be filled with a Journeyperson or Journeyperson In Training, the compensation ranges for a JIT include ($38.55 - $44.97) or Journeyperson rate of $45.89. Certificates/credentials and scoring in interview will determine your status and pay. Physical Requirements • Quick response to safety instructions, alarms, and signals are a must, • Ability to work and stand for extended periods, • Comfortably wear personal protective equipment, • Navigate a busy environment, • Bend, twist, kneel, crouch, and reach, • May need to lift or carry materials weighing up to 50 lbs. depending on department, • Occasional sitting during certain tasks, • Drive mobile equipment when needed General Motors UAW hourly employment offers a very competitive compensation and benefit package. An annual incentive payout is also available, as qualified. Relocation and travel expenses will be the responsibility of the applicant. Please note – per the labor agreement between GM and the UAW, GM may share information and documentation relating to the credentials of applicants for this position (e.g., resumes, journeyperson cards, interview notes, certificates, etc.) with UAW personnel who have a need to know as part of their role on the UAW skilled trades team. About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day – individually and collectively – to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being–at work and at home–so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting _. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit _. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, _ us or call us at 1-800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Job Description General Motors has a need for qualified Mechanical Journeypersons (Toolmaker). You will work under minimal supervision with a high level of independent judgement and problem solving. You should be flexible enough to take on and tackle multiple job assignments in a shift. Preferred Experience Includes: • Experience with planned maintenance systems and predictive technologies, • Experience with industrial robotics, automation, and conveyance systems Primary Responsibilities: • Follow established safety procedures according to OSHA standards and company procedures, • Maintain, dismantle, repair, and replace mechanical and hydraulic components (e. g. bearings, seals, details, carriers, etc.) on industrial machinery such as shafting, motors, generators, air compressors, engines, pumps, cylinders, gears, couplings, linkages, ball screws, high speed CNC spindles, coolant systems and filters, and combustion equipment and valves, • Layout, assemble, fabricate, maintain, and repair piping systems, • Use various hand or power tools for measuring, cutting, threading, grooving, bending, soldering, assembling, joining, and installing pipes, valves, and fittings, • Read and interpret blueprints for the mechanical operation and assembly of conveyor systems, material handling systems, robots, and other automation, • Operate mobile equipment (e.g. forklifts, vertical lifts, cranes), • Determine loading requirements to rig equipment and material for lifting, • Set up and operate conventional or computer numerically controlled (CNC) machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes, • Fabricate punches, tools, steel rule tools and t-sets to exact specifications, • Plan sequences of operations for fabricating tools or assemblies using blueprints, sketches, or models Determine quality of finished products, ensuring defect-free parts, by verifying dimensions, alignment, and clearances for conformance to specifications using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators Interested individuals must meet the following minimum qualifications: • At least six (6) years of related experience in a Mechanical trade (millwright, pipefitter, toolmaker, machine repair) or a U.S. Department of Labor Certificate of Completion in a Mechanical trade (millwright, pipefitter, toolmaker, machine repair)., • Must be able to satisfactorily complete the General Motors hiring process requirements which includes comprehensive assessments, drug testing, and a background check, • At least 18 years of age, • Eligible to work in the United States, • Must be willing to work flexible shift hours and day, afternoon, or night shifts as well as overtime hours daily, weekend and holidays on those shifts with little notice, • GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU NEED OR WILL NEED GM IMMIGRATION SPONSORSHIP TO WORK OR TO REMAIN EMPLOYED AT GM (e.g., H-1B, TN, STEM OPT, etc.)., • If you are a current GM employee operating under a collective bargaining agreement, please contact your local HR/LR for employee placement opportunities., • This position may be filled with a Journeyperson or Journeyperson In Training, the compensation ranges for a JIT include ($38.92-$45.40) or Journeyperson rate of $46.33. Certificates/credentials and scoring in interview will determine your status and pay. Physical Requirements • Quick response to safety instructions, alarms, and signals are a must, • Ability to work and stand for extended periods, • Comfortably wear personal protective equipment, • Navigate a busy environment, • Bend, twist, kneel, crouch, and reach, • May need to lift or carry materials weighing up to 50 lbs. depending on department, • Occasional sitting during certain tasks, • Drive mobile equipment when needed General Motors UAW hourly employment offers a very competitive compensation and benefit package. An annual incentive payout is also available, as qualified. Relocation and travel expenses will be the responsibility of the applicant. Please note – per the labor agreement between GM and the UAW, GM may share information and documentation relating to the credentials of applicants for this position (e.g., resumes, journeyperson cards, interview notes, certificates, etc.) with UAW personnel who have a need to know as part of their role on the UAW skilled trades team. About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day – individually and collectively – to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being–at work and at home–so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting _. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit _. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, _ us or call us at 1-800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Job Description General Motors has needs for qualified Industrial Electrician Journeypersons. Working under minimal supervision, the skilled trades Electrician Journeyperson is responsible for layout, installation, repair and preventative maintenance of complicated electrical equipment and circuits, troubleshooting and technical expertise on control systems. Primary Responsibilities: • Follow established safety procedures according to OSHA standards and company procedures, • Responsible for the maintenance and repair of electrical equipment, • Analyze and troubleshoot electrical malfunctions in equipment and related components, diagnosing and correcting the problems quickly to avoid production delays, • Perform electrical preventative and corrective maintenance on all plant equipment, • Promote teamwork and show a willingness to work with other departments, • Participate in continuous improvement activities, • Read and interpret drawings and wiring schematics, • Demonstrate strong problem-solving skills Interested individuals must meet the following minimum qualifications: At least six (6) years of related experience as an Electrician or a U.S. Department of Labor Certificate of Completion in the Electrical trade. Must be able to satisfactorily complete the General Motors hiring process requirements which includes comprehensive assessments, drug testing, and a background check At least 18 years of age Eligible to work in the United States Must be willing to work flexible shift hours and day, afternoon, or night shift as well as overtime hours daily, weekends and holidays on those shifts with little notice GM DOES NOT PROVIDE IMMIGRATION-RELATED SPONSORSHIP FOR THIS ROLE. DO NOT APPLY FOR THIS ROLE IF YOU NEED OR WILL NEED GM IMMIGRATION SPONSORSHIP TO WORK OR TO REMAIN EMPLOYED AT GM (e.g., H-1B, TN, STEM OPT, etc.). If you are a current GM employee operating under a collective bargaining agreement, please contact your local HR/LR for employee placement opportunities. This position may be filled with a Journeyperson or Journeyperson In Training, the compensation ranges for a JIT include ($37.77-$44.06) or Journeyperson rate of $44.96. Certificates/credentials and scoring in interview will determine your status and pay. Physical Requirements • Quick response to safety instructions, alarms, and signals are a must, • Ability to work and stand for extended periods, • Comfortably wear personal protective equipment, • Navigate a busy environment, • Bend, twist, kneel, crouch, and reach, • May need to lift or carry materials weighing up to 50 lbs. depending on department, • Occasional sitting during certain tasks, • Drive mobile equipment when needed General Motors UAW hourly employment offers a very competitive compensation and benefit package. An annual incentive payout is also available, as qualified. Relocation and travel expenses will be the responsibility of the applicant. Please note – per the labor agreement between GM and the UAW, GM may share information and documentation relating to the credentials of applicants for this position (e.g., resumes, journeyperson cards, interview notes, certificates, etc.) with UAW personnel who have a need to know as part of their role on the UAW skilled trades team. About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day – individually and collectively – to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Total Rewards | Benefits Overview From day one, we're looking out for your well-being–at work and at home–so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us Careers.Accommodations@GM.com or call us at 1-800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. You should be proficient in: • Electrical Troubleshooting Skills, • Electrical Installation, • Electrical Troubleshooting, • Electrical Repair, • Electrical / Electronic Systems, • Industrial Electrical Experience, • Industrial Electrical Systems, • Electrical Systems & Diagnostics (Heavy Equipment)

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Electrician Full-Time Position Overview GTI Fabrication is seeking an Electrician to install, maintain, troubleshoot, and repair electrical systems and components across manufacturing operations. The Electrician I \u007C Journeyman Electrician will support production equipment, plant electrical systems, and infrastructure to ensure safe, reliable, and efficient operation. This role will also support manufacturing operations tied to modular data center builds, electrical integration areas, power distribution equipment, and system-level production environments. The Electrician I \u007C Journeyman Electrician must have strong knowledge of industrial electrical systems, the ability to read blueprints and schematics, and hands-on experience working in a fast-paced industrial environment. Key Responsibilities Electrical Installation & System Support • Install, maintain, and enhance electrical systems and components including wiring, lighting, panels, breakers, conduit, disconnects, and control systems, • Perform preventative maintenance on electrical systems, equipment, and infrastructure to ensure reliability and uptime, • Calibrate equipment to provided specifications and verify proper operation, • Support power distribution systems serving modular data center production, assembly lines, and manufacturing equipment Troubleshooting & Repair • Inspect, test, and diagnose issues with electrical systems and components, • Troubleshoot electrical problems and perform timely repairs to minimize downtime, • Test electrical systems and components to verify proper functionality after repair, • Respond quickly to equipment failures impacting production schedules or plant operations Blueprints, Codes & Standards • Perform all work in accordance with electrical codes, OSHA requirements, safety standards, and company procedures, • Read and interpret electrical blueprints, schematics, one-lines, panel layouts, and diagrams, • Ensure installations and repairs meet required specifications and compliance standards, • Support lockout/tagout practices and safe energized work protocols where permitted Documentation & Inventory • Complete required documentation for repairs, maintenance activities, PM records, and service logs, • Maintain accurate records of work performed, downtime events, and system performance, • Ensure adequate inventory of electrical supplies, spare parts, tools, and replacement components, • Support MRO inventory planning for electrical consumables and critical spare parts Safety & Operational Support • Follow OSHA safety standards and internal safety protocols at all times, • Support safe operation of electrical systems across the facility, • Assist production teams by ensuring electrical systems support manufacturing operations, • Help maintain uptime for welding, fabrication, paint, assembly, testing, and electrical integration areas Continuous Improvement • Identify recurring failures and support Root Cause Analysis using structured problem-solving methods, • Support improvements to reliability, preventative maintenance, energy efficiency, and equipment uptime, • Participate in Lean Manufacturing, 5S, and Continuous Improvement initiatives Required Qualifications • 3–5 years of experience as an Electrician, Industrial Electrician, or Journeyman Electrician, • Strong ability to read and interpret electrical blueprints, schematics, diagrams, and one-lines, • Working knowledge of electrical theory, materials, controls, motors, and industrial equipment, • Experience using hand and power tools associated with electrical work, • Ability to troubleshoot and repair electrical systems in an industrial environment, • Ability to lift, carry, push, and pull up to 50 pounds, • Ability to bend, climb, squat, reach, and kneel, • Valid driver’s license Preferred Qualifications • Completion of an electrician apprenticeship, technical school, or trade program, • Journeyman Electrician license preferred, • Experience in industrial manufacturing, modular manufacturing, or contract manufacturing environments, • Familiarity with preventative maintenance programs, electrical calibration, and equipment reliability systems, • Experience supporting modular data center infrastructure, power systems, or electrical integration operations, • PLC troubleshooting or controls experience preferred, • Willingness to work overtime as needed GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionWe have openings for electricians in the Buffalo area. Some of these jobs are high profile projects. We are especially in need of journey level and supervisory level workers.All of our positions include:Great PayGuaranteed raisesFamily HealthcareRetirementAll Benefits are 100% employer paidOpportunity for every skill levelFree upgrade and leadership trainingContractor provided power toolsOvertime opportunitiesJob Responsibilities for Commercial and Industrial Electrician:Installation and Maintenance: Install, maintain, and repair electrical systems in commercial and industrial settings, including wiring, panels, circuits, motors, and equipment.Troubleshooting and Repairs: Diagnose and troubleshoot electrical issues, using a variety of tools and techniques to identify and resolve problems efficiently.Compliance with Codes and Standards: Ensure all electrical work adheres to local, state, and federal electrical codes, safety standards, and building regulations.Blueprint Interpretation: Read and interpret blueprints, schematics, and technical drawings to plan and execute electrical installations and upgrades.System Upgrades and Modifications: Upgrade and modify existing electrical systems to improve performance or meet new requirements, such as adding outlets or equipment.Safety Protocols: Adhere to strict safety protocols, including lockout/tagout procedures, to ensure the safety of the work environment.Collaboration: Work closely with other contractors, engineers, and team members to complete projects on time and within budget.Preventive Maintenance: Conduct regular inspections and preventive maintenance on electrical systems and equipment to reduce downtime and increase operational efficiency.Emergency Response: Provide on-call support for emergency electrical repairs, ensuring quick response and resolution of critical issues. Job Posted by ApplicantPro

Overview: The Testing and Commissioning Specialist will support Lemartec data center projects from initial design through project closeout. This role is responsible for executing and coordinating all startup, commissioning, testing, and training activities to ensure systems operate according to design intent and client expectations. The Specialist collaborates with the team to ensure the successful and safe commissioning of all critical systems. Location & Travel Details You’ll get the opportunity to travel across the US, helping our team build infrastructure projects. This is a traveling position, requiring travel up to 100% of the time. You may support projects located in various states throughout the US. Potential project locations may include, but are not limited to, PA, KS, NC, SC, VA, GA, TX, FL, IA, WY, and additional locations are added frequently as our organization continues to grow. COMPANY OVERVIEW Founded in 1979, Lemartec is a national general contractor and construction management firm and is part of the General Building group within MasTec’s Clean Energy and Infrastructure segment. As MasTec’s vertical construction arm, Lemartec delivers complex projects across industrial, aviation, power, and large commercial markets. Led at the segment level by Manny García-Tuñón, the General Building Operating Group represents MasTec’s vertical construction capabilities and serves as the platform for future growth in this space. As a MasTec company, Lemartec maintains international capabilities and strategic partnerships throughout the Americas and the Caribbean, enabling the execution of some of the most complex projects in the industries we serve. Through MasTec’s network of more than 22,000 professionals and subject matter experts in Engineering, Procurement, and Construction across over 400 locations throughout North America and the Caribbean, Lemartec is uniquely positioned to serve a diversified customer base. With experience across all 16 disciplines of construction, Lemartec combines deep technical expertise with the strength, scale, and financial backing of MasTec to successfully deliver projects of any size and complexity. The General Building operating group is part of the MasTec Clean Energy & Infrastructure (CE&I) business segment. The CE&I segment generates over $4.5 billion in annual revenue, providing construction services across our renewables, industrial, infrastructure, and general building operating groups. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Join one of the largest construction firms in the country (Engineering News-Record [ENR]: #1 in Power, #17 Top 50 Domestic Heavy Contractors, #20 Transportation Contractor). Responsibilities: • Support and execute the startup and commissioning plan from construction turnover through final handoff to operations., • Follow and apply MPC's lock-out/tag-out procedures during the transition from construction to commissioning until turnover to the client., • Ensure startup and commissioning deliverables are met in accordance with site-specific procedures, project schedules, contract requirements, and safety protocols., • Review engineering drawings and specifications to confirm adequate provisions for flushing, cleaning, testing, and other pre-commissioning activities., • Coordinate with Engineering, Quality Assurance, and Operations to confirm that equipment and services provided through subcontracts meet project specifications during and after commissioning., • Facilitate and support OEM and vendor training sessions for client personnel, including plant operations and maintenance teams., • Collaborate with subcontractors and vendor representatives during start-up, commissioning, and performance testing activities., • Organize and lead daily start-up Plan of the Day (POD) meetings; prepare and distribute meeting minutes., • Support the system turnover process by scheduling and participating in system walkdowns and initial system operations., • Maintain daily logs of operational, maintenance, and safety activities including test results, instrument readings, and details of equipment issues and resolution., • Coordinate commissioning-related subcontractor support and field labor in collaboration with site construction management. Qualifications: Work Experience and Education: • Bachelor’s degree from an accredited college, • 5+ years of experience in testing and commissioning projects., • Experience in commissioning mechanical, electrical, and controls systems in mission-critical environments such as data centers., • Understanding of utility systems (water, fuel, steam), electrical distribution systems, PLCs, DCS platforms, and rotating equipment (e.g., boilers, turbines)., • Working knowledge of safety regulations, testing protocols, project schedules, and commissioning milestones., • Ability to interpret engineering drawings, technical specifications, and system control narratives. Knowledge/Skills/Abilities: • Familiarity with local specifications and supplements to each and with reading blueprints and, • Proficiency in planning, scheduling, and production, in P6, Microsoft Project or equivalent software and in Microsoft, • Office suite of software-Excel/Word/Outlook also needed along with estimating software knowledge., • Excellent organizational, presentation and interpersonal skills., • High degree of professionalism and strong work ethic, • Multi-tasks and stay focused on the big picture while addressing daily issues In addition to the above listed minimum requirements, candidates who poses the following skills, experience, and capabilities may receive greater consideration during the evaluation process: • Ability to travel within the U.S What's in it for you: Financial Wellbeing • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Flexible spending account (Healthcare & Dependent care) Health & Wellness • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance Family & Lifestyle • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Employee Assistance Program Planning for the Unexpected • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at _. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-SL1 #LI-ONSITE Appcast (For Export): #appyellow

Overview: The Testing and Commissioning Specialist will support Lemartec data center projects from initial design through project closeout. This role is responsible for executing and coordinating all startup, commissioning, testing, and training activities to ensure systems operate according to design intent and client expectations. The Specialist collaborates with the team to ensure the successful and safe commissioning of all critical systems. Location & Travel Details You’ll get the opportunity to travel across the US, helping our team build infrastructure projects. This is a traveling position, requiring travel up to 100% of the time. You may support projects located in various states throughout the US. Potential project locations may include, but are not limited to, PA, KS, NC, SC, VA, GA, TX, FL, IA, WY, and additional locations are added frequently as our organization continues to grow. COMPANY OVERVIEW Founded in 1979, Lemartec is a national general contractor and construction management firm and is part of the General Building group within MasTec’s Clean Energy and Infrastructure segment. As MasTec’s vertical construction arm, Lemartec delivers complex projects across industrial, aviation, power, and large commercial markets. Led at the segment level by Manny García-Tuñón, the General Building Operating Group represents MasTec’s vertical construction capabilities and serves as the platform for future growth in this space. As a MasTec company, Lemartec maintains international capabilities and strategic partnerships throughout the Americas and the Caribbean, enabling the execution of some of the most complex projects in the industries we serve. Through MasTec’s network of more than 22,000 professionals and subject matter experts in Engineering, Procurement, and Construction across over 400 locations throughout North America and the Caribbean, Lemartec is uniquely positioned to serve a diversified customer base. With experience across all 16 disciplines of construction, Lemartec combines deep technical expertise with the strength, scale, and financial backing of MasTec to successfully deliver projects of any size and complexity. The General Building operating group is part of the MasTec Clean Energy & Infrastructure (CE&I) business segment. The CE&I segment generates over $4.5 billion in annual revenue, providing construction services across our renewables, industrial, infrastructure, and general building operating groups. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Join one of the largest construction firms in the country (Engineering News-Record [ENR]: #1 in Power, #17 Top 50 Domestic Heavy Contractors, #20 Transportation Contractor). Responsibilities: • Support and execute the startup and commissioning plan from construction turnover through final handoff to operations., • Follow and apply MPC's lock-out/tag-out procedures during the transition from construction to commissioning until turnover to the client., • Ensure startup and commissioning deliverables are met in accordance with site-specific procedures, project schedules, contract requirements, and safety protocols., • Review engineering drawings and specifications to confirm adequate provisions for flushing, cleaning, testing, and other pre-commissioning activities., • Coordinate with Engineering, Quality Assurance, and Operations to confirm that equipment and services provided through subcontracts meet project specifications during and after commissioning., • Facilitate and support OEM and vendor training sessions for client personnel, including plant operations and maintenance teams., • Collaborate with subcontractors and vendor representatives during start-up, commissioning, and performance testing activities., • Organize and lead daily start-up Plan of the Day (POD) meetings; prepare and distribute meeting minutes., • Support the system turnover process by scheduling and participating in system walkdowns and initial system operations., • Maintain daily logs of operational, maintenance, and safety activities including test results, instrument readings, and details of equipment issues and resolution., • Coordinate commissioning-related subcontractor support and field labor in collaboration with site construction management. Qualifications: Work Experience and Education: • Bachelor’s degree from an accredited college, • 5+ years of experience in testing and commissioning projects., • Experience in commissioning mechanical, electrical, and controls systems in mission-critical environments such as data centers., • Understanding of utility systems (water, fuel, steam), electrical distribution systems, PLCs, DCS platforms, and rotating equipment (e.g., boilers, turbines)., • Working knowledge of safety regulations, testing protocols, project schedules, and commissioning milestones., • Ability to interpret engineering drawings, technical specifications, and system control narratives. Knowledge/Skills/Abilities: • Familiarity with local specifications and supplements to each and with reading blueprints and, • Proficiency in planning, scheduling, and production, in P6, Microsoft Project or equivalent software and in Microsoft, • Office suite of software-Excel/Word/Outlook also needed along with estimating software knowledge., • Excellent organizational, presentation and interpersonal skills., • High degree of professionalism and strong work ethic, • Multi-tasks and stay focused on the big picture while addressing daily issues In addition to the above listed minimum requirements, candidates who poses the following skills, experience, and capabilities may receive greater consideration during the evaluation process: • Ability to travel within the U.S What's in it for you: Financial Wellbeing • Compensation $110k-$150k+ / year, commensurate with experience, • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Flexible spending account (Healthcare & Dependent care) Health & Wellness • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance Family & Lifestyle • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Employee Assistance Program Planning for the Unexpected • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at _. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-SL1 #LI-ONSITE Appcast (For Export): #appyellow

Overview: Responsible in managing, leading, coordinating, and administering multiple projects at separate locations from the conceptual stages through planning, engineering, procurement, construction, start-up, performance testing, initial operations, and prime contract close-out. Responsible for assisting Business Development in expanding current work scope, developing proposal technical and pricing strategies and preparing proposal execution strategies/plans. Also supports communications and presentations to customers. Supervises the development of budgets and schedules, manages performance, reports progress, and initiates action to assure project objectives and schedules are met and work is performed within budget and according to specifications. Resolves problems and manages the final turnover of the project to the customer. Provides leadership for the development and maintenance of a high-performance project team. Has overall management responsibility for project execution, ensuring the project is delivered within contract requirements, standards of ethics, quality and safety and to Customer and Lemartec performance expectations. The Project Director (PD), will lead a team of senior project managers, project managers, field staff and assigned support staff across various projects, and is responsible for managing those projects at a strategic level. The PD is the primary point of contact, managing the project teams, resources and financials, to ensure that the projects deliver value to stakeholders, are delivered to industry best standards of quality and safety, on schedule, on budget, and meet technical and contractual requirements required. The PD regularly reviews progress reports and acts to align the development of the project within the broader goals of the organization through staffing, financial, or other adjustments. The PD will provide coaching, guidance, direction, and leadership to the project teams in relation to various issues, risks, activities, general management and project approach. Location & Travel Details You’ll get the opportunity to travel across the US, helping our team build infrastructure projects. This is a traveling position, requiring travel up to 100% of the time. You may support projects located in various states throughout the US. Potential project locations may include, but are not limited to, PA, KS, NC, SC, VA, GA, TX, FL, IA, WY, and additional locations are added frequently as our organization continues to grow. Company Overview Founded in 1979, Lemartec is a national general contractor and construction management firm and is part of the General Building group within MasTec’s Clean Energy and Infrastructure segment. As MasTec’s vertical construction arm, Lemartec delivers complex projects across industrial, aviation, power, and large commercial markets. Led at the segment level by Manny García-Tuñón, the General Building Operating Group represents MasTec’s vertical construction capabilities and serves as the platform for future growth in this space. As a MasTec company, Lemartec maintains international capabilities and strategic partnerships throughout the Americas and the Caribbean, enabling the execution of some of the most complex projects in the industries we serve. Through MasTec’s network of more than 22,000 professionals and subject matter experts in Engineering, Procurement, and Construction across over 400 locations throughout North America and the Caribbean, Lemartec is uniquely positioned to serve a diversified customer base. With experience across all 16 disciplines of construction, Lemartec combines deep technical expertise with the strength, scale, and financial backing of MasTec to successfully deliver projects of any size and complexity. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables, and infrastructure sectors. In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects, and commercial buildings. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Join one of the largest construction firms in the country (Engineering News-Record [ENR]: #1 in Power, #17 Top 50 Domestic Heavy Contractors, #20 Transportation Contractor). Responsibilities: Supervision Received • Reports to and receives strategic project (P&L) guidance from the assigned Vice President of Strategic Operations., • Receives functional and technical guidance from the Director of Project Services. Supervision Exercised • Provides direction to assigned project reports, including senior project managers, project managers, field staff, and assigned support staff across various projects. Contacts • Acts as the principal contact for the project scope of work with Customers and Lemartec management throughout the duration of the project., • Maintains contact with management personnel from suppliers, subcontractors, and governmental agencies as appropriate., • Maintains management-level relationships with other participating entities responsible for performing services in connection with the project, including organizations in the community. Project Planning & Execution • Assists Business Development in developing win plans, preliminary project execution plans, estimating plans, proposal plans, proposals, and contract formulation., • Reviews draft prime contract and proposal documents; develops prime contract strategy and plan., • Participates in prime contract negotiations, including client/customer deliverables and schedules., • Ensures proper and clear Division of Responsibility (DOR) and integrated work processes., • Establishes an appropriate, integrated organizational structure, including off-project functional and specialist support., • Defines and communicates roles, responsibilities, and authorities to project team members and the Customer to ensure project completion safely, on budget, on schedule, and in compliance with standards and regulations., • Ensures scope, design basis, and objectives are defined, best practices/lessons learned reviewed, and detailed work plans, schedules, budgets, and procedures are established, including Project Execution Plan and Contract Management Plan., • Promotes constructability reviews during project execution. Project Monitoring & Control • Monitors and controls all contractual commitments to ensure compliance with specifications, drawings, and terms of the contract., • Implements and maintains a change management control system; ensures all Customer communications on the prime contract are documented., • Facilitates development, communication, implementation, update, and continual use of the Project Execution Plan., • Reviews and approves Project Control systems to measure progress/performance, provide early warning of deviations, and identify corrective actions., • Identifies quality requirements and ensures processes achieve contractual quality commitments; assesses customer perception of quality periodically., • Oversees the Environmental, Health & Safety program for office, field, and subcontractor activities., • Ensures design complies with applicable EH&S laws and regulations., • Oversees Document Control and Records Management; coordinates documentation and software turnover packages to the client., • Reviews and approves bid tabulations for major purchase orders, contracts, and subcontracts; approves critical changes per delegated authority., • Directs the preparation and presentation of Project Status Reports (PSR) to Lemartec management., • Monitors cash flow, informs the Customer of cash requirements, and controls budget for non-reimbursable costs., • Assists in training new project managers and personnel; establishes plans for ongoing training opportunities., • Promotes Continuous Improvement (CI) and Total Installed Cost (TIC) concepts across project teams; encourages team building., • Conducts periodic project and Customer meetings to promote communication, review progress, discuss issues, and facilitate problem resolution., • Manages documentation Project / Program Management • Manages strategic aspects of large engagements and mitigates risk., • Oversees Project Managers and managers on client engagements., • Reviews high-level deliverables across practice., • Ensures engagement reviews and quality assurance procedures occur., • Provides leadership across all assigned projects., • Develops, implements, and maintains sound business practices and strategic objectives aligned with Lemartec initiatives. Project Financial Reporting • Reports profit and loss figures; consolidates and analyzes profitability, revenue, margins, bill rates, and utilization., • Creates pipeline forecasts and broad-based financial pictures., • Addresses and resolves billing issues., • Ensures practice meets or exceeds budgeted financial objectives., • Develops and meets revenue and financial goals; negotiates contract pricing when necessary. Business Development • Provides leadership and guidance throughout the sales cycle., • Leads strategic account identification and development., • Engages Business Development as appropriate to achieve sales goals., • Manages business development at a strategic level., • Grows long-term client relationships and capitalizes on partnership opportunities. Communication • Keeps practice informed of changes and newsworthy events within Lemartec., • Communicates relevant practice information to the Director of Construction Operations., • Handles difficult personnel situations with discretion, HR advice, and respect., • Promotes Lemartec via industry conferences and local business organizations., • Technical Understanding, • Evaluates and redesigns practice offerings., • Guides clients on technical solutions. Teamwork • Reinforces a team approach on client projects and internal initiatives., • Supports and solicits input from all team levels., • Ensures regular team and practice events occur outside the office. Client Management • Communicates with clients to identify needs and evaluate business solutions., • Continuously seeks to increase customer satisfaction and deepen relationships., • Maintains lasting client relationships and resolves issues at a senior level. Innovator Development • Enforces performance evaluation and career development programs., • Guides Project Managers on career planning importance., • Creates an environment for professional growth., • Assigns tasks to managers that enable growth opportunities. Internal Operations • Reviews status reports of Project Managers; addresses issues as appropriate., • Provides expertise to internal teams and task forces., • Enforces standard policies and procedures., • Maintains knowledge of Lemartec organization, policies, QA/QC, Safety, and industry processes., • Organizes and staffs project teams effectively within a matrix organization., • Applies knowledge of front-end activities, including Best Practices, Constructability, Risk Analysis, Contingency Evaluation, and Estimate/Proposal Review Process., • Uses Lemartec standard tools and procedures for Project Controls, Financial Management (PSR, Sage), Automation, Records Management (Procore), and Root Cause Analysis., • Develops and implements project baselines: Scope Definition, Roles/Responsibilities, Estimates, Resource-Loaded Schedules, Progress/Performance Metrics, Reports, and Action Tracking., • Demonstrates business and commercial awareness, including cash flow management and conserving Lemartec capital., • Experienced in Project Execution Plan development, Continuous Improvement, Schedule Management, Prime Contract/Subcontract formulation, Risk Analysis, Negotiations, Change Control, Cost Trend Programs, Documentation Management, Insurance, and Bonding., • Possesses strong oral, written, graphic communication, and presentation skills., • Conducts effective meetings. Qualifications: Work Experience and Education Bachelor’s degree in Architecture, Engineering, or Construction Management. 15 years of experience as a Senior Project Manager on commercial and/or industrial projects. 5 years of experience as a Project Director. Knowledge, Skills, and Abilities • Ability to travel within the U.S., • Experience managing projects exceeding $250M in value., • Design-build project experience., • Experience with budget control and value engineering., • In-depth knowledge of all design disciplines, specifications, and drawings., • Proficiency in planning and scheduling using Primavera P6., • Advanced skills with Microsoft Office Suite – Excel, Word, Outlook., • Working knowledge of standard construction accounting software – Viewpoint Vista, Sage 300 CRE, etc., • Working knowledge of standard Project Management software – Procore., • Excellent communication, presentation, and interpersonal skills., • High degree of professionalism and strong work ethic., • Preferred Bilingual: English/Spanish What's in it for You Financial Wellbeing • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Flexible spending account (Healthcare & Dependent care) Health & Wellness • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance, Weight Management Drug Discount Discounted National Gym Membership Network Family & Lifestyle • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Benefits Continuation, • Employee Assistance Program Planning for the Unexpected • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, and hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact ceicareers@mastec.com. Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at _. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-SL1 #LI-ONSITE Appcast (For Export): #appyellow

Job Description SHIFTS: ROTATING CONTINENTAL Bericap is a privately held family-owned company founded in 1926, and is one of the leading manufacturers of plastic closures for food, beverage and industrial markets. As a result of continued growth Bericap has multiple full-time, hourly openings for Injection Operators reporting to the Production Supervisor. Operation and monitoring of injection molding and packaging machines to ensure plastic closures meet production schedules, safety standards, and quality specifications. This role is responsible for maintaining organized inventory levels, ensuring packaging supplies are readily available, performing routine equipment inspections, and addressing minor mechanical issues to minimize downtime and support uninterrupted production and packaging operations. Responsibilities Packaging & Material Handling • Package and label finished products, • Ensure proper packaging is utilized as per the Bill of Material and that labeling of WIP and finished goods are completed and accurate, • Document materials used during changeovers, • Maintain material supplies to machines, • Daily and weekly machine sanitizing, • Documentation of quality checks at set intervals, • Initiate action for non-conformances, • Documentation of production paperwork, • Packaging, tagging, and stamping boxes of products with stretch wrap and check packaging and labeling of WIP/ Finished goods, • Perform daily preventative maintenance checks on machines, • Request work orders for machine and safety issues, • Ability to lift 50 pounds unassisted and to work while standing for 12 hours, • Ensure proper disposal of scrap materials into the designated containers, • Empty scrap bins at vision system and assembly fault outlets as necessary and record accurately in the system, • Enter downtime into MRP software (Freedom), • Collaborate with different departments as required to ensure production demands are met Injection Machine Operation • Ensure machines run according to the production schedule, Bill of Materials and Bericap standards, • Respond promptly to machine alarms and take preventative action, • Maintain material supplies to machines, • Verify cavitation and complete Injection Verification Log at the start of each shift, • Update production information on WE3 when necessary, • Perform and document quality checks at prescribed intervals, • Issue work orders for machine, mold, and safety concerns, • Enter scrap and downtime into WE3 system Machine Maintenance Housekeeping • Conduct timely preventative maintenance for injection machines, molds, and accessorial equipment, • Ensure the Masterbatch room is maintained in an orderly fashion and scan masterbatch accurately, • Ensure proper disposal of scrap materials into designated containers, • Dispose of scrap and record it in the system Process Control and Troubleshooting Support the Level 2 Injection Operators in the following areas as required and for training purposes: • Troubleshoot injection and accessory equipment, involving the Process and Maintenance teams as necessary, • Initiate corrective actions for non-conformances, • Set up for changeovers, color changes, document adjustments and initiate changeover sheets and first-off red flags, • Perform cavity plate transfers and improve cycle times -, • Perform and document quality checks at prescribed intervals, • Issue work orders for machine, mold, and safety concerns, • Enter scrap and downtime into WE3 system Documentation & Reporting • Maintain accurate production paperwork, • Record any adjustments and quality checks, • Document scrap and downtime entries, • Ensure all logs and reports are up to date and accurate Other • Ensure all quality, food safety, safety, environmental as well as all other Company policies and procedures are followed, • Ensure that all quality, food safety, safety, and environmental issues are reported to the appropriate manager or supervisor, • Maintain a clean work area, • Identify opportunities for improvement and enter into the See It, Sort It, Report It system, • Collaborate with different departments as required, • Support communication and coordination across teams to ensure smooth operations, • Attend communication meetings Skills & Abilities • Basic mathematical skills, • Good computer skills, • Mechanical aptitude, • Ability to work effectively and efficiently in a team environment, • Good verbal, written communication, and interpersonal skills with coworkers, supervisors, and management, • Strong attention to detail, • Ability to use material handling equipment including but not limited to forklifts, manual pallet jacks, electric stackers (if trained) and bar code scanners, • Effective time management skills to keep production running smoothly Education • High School Diploma or equivalent preferred. Experience • 1-2 years of manufacturing experience, • Working knowledge of injection molding an asset, • Experience running multiple machines simultaneously preferred Reporting Structure • Position reports to the Production Supervisor Benefits Medical, dental and vision insurance FSA and Dependent Care Accounts Company paid short term, long term and life insurance 401(k) plans with company matching contributions Paid Time Off Tuition Reimbursement Employee Recognition Program Employee Fitness Reimbursement About Bericap Bericap is a privately held family-owned company founded in 1926, and is one of the leading manufacturers of plastic closures for food, beverage and industrial markets. Bericap’s plastic closures incorporate tamper evidency, sealing features, pouring features, and are backed by our R & D centers in the U.S. and Europe. Bericap produces more than 91 billion closures annually with 26 plants operating in 21 countries and employs more than 4,000 people. The quality of people is the one element that distinguishes one company from others; Bericap recognizes that it is the total sum of its employees' talent and professionalism that is responsible for its success. For this reason, the Company makes every effort to attract the finest professionals, nurture their growth, and place their capabilities at the service of its customers. Bericap NY, LLC is an Equal Opportunity Employer and administers all personnel practices without regard to race, color, religion, sex, age, national origin, disability, sexual orientation, gender identity or expression, marital status, veteran status, genetics or any other category protected under applicable law. You should be proficient in: • Troubleshooting Skills, • Food and Beverage Manufacturing, • Material Handler Experience, • Packaging Experience, • Precision Measurement & Inspection, • Machine Setups for Production Runs, • Excellent Communication Skills, • Shop Math Skills Machines & technologies you'll use: • Injection Molding Machine

Job Description GTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safety I Quality I Customer Obsession I Speed I Agility Position Overview We’re seeking reliable Machine Operators skilled in CNC machinery and/or brake press operation to join our growing fabrication team. Operators will be responsible for setting up, running, and monitoring production equipment to shape, cut, bend, and finish metal components to strict specifications. This role supports end-to-end fabrication processes within GTI’s advanced manufacturing environment, contributing to production efficiency, quality output, and workplace safety. Key Responsibilties • Prepare, set up, and operate CNC machines (e.g., milling, routing, punching) according to work orders and engineering drawings., • Set up and operate press brake equipment for bending and forming sheet/plate metal to required dimensions and angles., • Load and align tooling, fixtures, and program parts based on engineering specs., • Inspect finished parts for quality, dimensional accuracy, and adherence to tolerances using measuring tools (calipers, micrometers, gauges)., • Perform routine maintenance and cleaning of machinery; report issues to maintenance/lead personnel., • Follow established safety protocols and maintain a clean, organized work area., • Collaborate with production team members and supervisors to meet daily production goals., • Document machine run times, material usage, and production data accurately.Requirements Required • Prior experience operating CNC machines and/or press brakes in a manufacturing or fabrication setting., • Basic understanding of machine setup, tooling changes, and part measurement., • Ability to read and interpret blueprints, technical drawings, and standard work instructions., • Comfortable using precision measuring tools., • Commitment to safety standards and quality outcomes., • Capacity to stand for extended periods and lift up to ~50 lbs. Preferred • Formal technical training or certification in machining, fabrication, or related fields., • Experience with industrial metal fabrication processes (sheet/plate steel).Familiarity with CAD/CAM or CNC programming fundamentals. Benefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. Perks & Benefits GTI offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy Policy Terms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Are you a skilled mechanic or technician looking to take your career to the next level? Kinsley Power Systems is hiring Field Service Technicians to service stand-by generators throughout the Northeast. If you have experience with engines, electrical systems, or heavy equipment—especially in automotive, trucking, marine, or construction—you may already have what it takes to thrive in this role. We offer specialized training to help you transition into the power generation industry and build a long-term, rewarding career. Kinsley Power Systems, a family-owned business, has been a trusted leader in generator service, sales, and rentals for over 60 years. We’re committed to exceeding customer expectations in a workplace that’s both enjoyable and supportive—where your hard work is recognized and your growth is prioritized. Key Responsibilities and Preferred Experience: • Performing preventative maintenance and repairs on standby generator systems (Ranging from 8kW-1mW), • Troubleshooting, diagnostic testing, load-bank testing and start-ups on generators, • Preparing accurate quotes for repairs and completing/submitting work orders, • Previous experience working on residential or industrial generators, • Exceptional communication and customer service skills, • The ability to participate in an on call, rotating schedule, • Must provide your own tools (multi-meter, hand-tools, etc.), • Very safety focused with an OSHA 10 (or the ability to attain one), • Valid DOT Card (or the ability to attain one) and a valid driver’s license Benefits: • Competitive pay and PTO to keep your work-life balance in check, • Full health benefits package (Medical, Dental, Vision, etc.) + 401(k) with match, • Company-paid certifications and specialized training to grow your skills, • Company vehicle and gas card so you’re always ready to roll, • Uniforms provided, plus annual boot and uniform stipends, • Real advancement opportunities—grow your career with a team that wants to see you succeed, • A chance to work alongside some of the best technicians in the industry in a company that feels like family All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. The anticipated compensation range for this position is $22.00 to $45.00 hourly. Actual compensation may vary based on skills, experience, certifications, location, and other business-related factors. Kinsley Group offers a comprehensive benefits package that may include medical, dental, and vision insurance, company-paid life insurance, disability coverage, paid time off, paid holidays, 401(k) with company match, employee assistance programs, and other company-sponsored benefits. Compensation details: 22-45 Hourly Wage PIa176278a1bd8-25405-40545836

Job Description Power Drives, Inc. is a Buffalo‑based manufacturer specializing in custom‑engineered hose, tube, and fluid conveyance systems for a wide range of industrial and mobile equipment applications. Founded in 1946, PDI is known for delivering high‑quality, reliable solutions backed by strong engineering expertise and decades of industry experience. Pay Rate: $17.50 per hour. Employees have opportunities for salary increases through our tiered training program, as well as monthly performance incentives. Schedule: 7:00 AM -5:30 Monday- Thursday This role is 100% onsite CLIMATE CONTROLLED ENVIRONMENT Objective: To assemble, test and tag hoses, tubes, fittings, and accessories with the highest level of quality and efficiency. Minimum Requirements • High School Diploma or equivalent Job Requirements • Ability to comprehend and execute work assignments with minimal follow up supervision, • Ability to stand throughout entire shift, • Be customer service and quality driven, • Ability to read and comprehend blueprints, • Ability to be cross trained in other functions, • Observant, attentive to detail, and quality conscious, • Self-motivated and task driven, • Basic math, reasoning, and problem-solving skills, • Ability to work independently or in a team environment, • Ability to lift up to 40lbs. Essential Duties and Responsibilities • Execute assignments as given by the supervisor or group leader, • Meet or exceed quality of work and quantity expectations, • Follow all work instructions, policies, work rules, safety guidelines, and work procedures, • Utilize measurement devices like calipers, digital scales, and gage clocks to perform quality checks as required, • Perform basic preventative equipment maintenance as assigned, • Participate in problem solving, continuous improvement, and customer complaint resolution efforts, • Immediately inform supervisor or group leader of all equipment, process, material, safety, or quality concerns, • Training other team members as assigned, • Participate in daily area clean up and more significantly facility clean-up efforts as assigned, • Read and understand product blueprints and technical data sheets as required, • Set up machinery and properly use protractors and other jigs and fixtures as required, • Ensure completed product and left-over materials are returned to proper locations, • Accept reassignments to other departments as workload dictates Physical Requirements This position demands physical strength, endurance, using industrial tools and machinery. Candidates must be comfortable with repetitive tasks, bending, twisting, pushing, pulling, heavy lifting (up to 40 lbs.) and standing for a long period of time while working in a fast-paced industrial manufacturing environment. 2026 Buffalo's Business First Best Places To Work Finalist

Job DescriptionDescription:Are you a skilled HVAC/R Service Technician? We at Tri-R Mechanical are currently seeking an experienced and dedicated professional to join our team. As an HVAC/R Service Technician, you will be responsible for maintaining, repairing, and installing heating, ventilation, air conditioning, and refrigeration systems in commercial/ industrial buildings. Your position will play a crucial role in ensuring the comfort and safety of our clients by providing exceptional service and quality workmanship. Responsibilities: • Conduct regular inspections and preventive maintenance on HVAC/R systems., • Diagnose and troubleshoot malfunctions in heating, air conditioning, and refrigeration systems., • Repair or replace defective components in HVAC/R systems., • Install new heating, air conditioning, and refrigeration systems., • Collaborate with other technicians to solve complex problems., • Maintain accurate documentation of all service and repair activities., • Respond to emergency service calls in a timely manner., • Ensure compliance with industry regulations and safety standards. Requirements: • High school diploma or equivalent., • Certification or license as an HVAC/R technician., • Minimum of 3 years of experience in the HVAC/R industry., • Strong knowledge of HVAC/R systems and their components., • Proficient in diagnosing and repairing HVAC/R systems., • Excellent troubleshooting skills., • Ability to read and interpret technical manuals and blueprints., • Strong communication and customer service skills., • Valid driver's license and clean driving record., • Ability to work independently and as part of a team., • Physical stamina and strength to perform manual labor and lift heavy equipment., • Flexibility to work evenings, weekends, and on-call shifts as needed., • Attention to detail and commitment to quality workmanship.

Job DescriptionDescription$30-$40+/Hour | Company Vehicle | Full Benefits | Year-Round Commercial Work Join One of Western New York's Most Respected Mechanical Contractors Looking for more than just another HVAC job? At DWC Mechanical, we're looking for experienced Commercial HVAC Service Technicians who take pride in their craft, enjoy solving complex mechanical challenges, and want to build a long-term career with a company that values and invests in its people. For over 30 years, DWC Mechanical has been a trusted name in commercial HVAC and mechanical services throughout Western New York. As a proud NexCore partner, we're backed by a growing national platform with 18+ operating companies across the United States, providing long-term stability, career growth opportunities, and access to industry-leading resources while maintaining the local culture and reputation that make DWC a great place to work. If you're looking for a company that recognizes your experience, respects your expertise, and provides opportunities to grow, we want to hear from you. Why Technicians Choose DWC Mechanical Competitive Compensation • $30-$40+ per hour based on experience, certifications, and skill level, • Higher compensation opportunities available for advanced technicians with extensive commercial experienceCareer Growth, • Ongoing technical training and professional development, • Opportunities to advance into senior technician, lead technician, foreman, and management rolesStability & Opportunity, • Consistent year-round commercial service work, • Growing company with strong local roots and national backing, • Diverse commercial and industrial customer baseTools for Success, • Company vehicle, • Modern technology and support, • Experienced leadership team, • Strong safety cultureTeam Environment, • Work alongside highly skilled technicians, • Supportive culture focused on teamwork and development, • Company that values craftsmanship, accountability, and customer serviceWhat You'll Be Working On Our technicians work on a wide variety of commercial and industrial HVAC systems, providing challenging and rewarding work every day. Equipment & Systems Include: • Rooftop Units (RTUs), • Make-Up Air Units, • Heat Pumps, • Condensers, • Split Systems, • Building Controls, • Boiler Systems, • Variable Frequency Drives (VFDs), • Variable Refrigerant Flow (VRF) Systems, • Variable Air Volume (VAV) Systems, • Cooling Towers, • CRAC Units, • Chiller Systems What You'll Do • Diagnose, troubleshoot, repair, and maintain commercial HVAC equipment, • Perform preventative maintenance and system inspections, • Identify electrical, mechanical, and controls-related issues, • Communicate professionally with customers and facility personnel, • Complete service documentation accurately and on time, • Maintain company vehicle, tools, and equipment, • Follow all company safety procedures and PPE requirements, • Deliver exceptional customer service during every interaction, • Mentor apprentices and junior technicians as needed, • Represent DWC Mechanical with professionalism and integrity What We're Looking ForRequired • 3+ years of HVAC service experience, • Strong troubleshooting and diagnostic abilities, • Knowledge of commercial HVAC systems and controls, • Ability to work independently and manage service calls effectively, • Strong customer service and communication skills, • Valid driver's license with acceptable driving recordPreferred, • Commercial HVAC experience, • EPA Certification, • HVAC trade school or technical training, • Experience with building automation systems and advanced controls, • Boiler, chiller, VRF, or controls experience BenefitsWe offer a comprehensive benefits package to support you and your family: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA) with Company Contribution, • Company-Paid Life Insurance, • 401(k) with Company Match, • Paid Holidays, • Generous Paid Time Off, • Professional Development Assistance, • Employee DiscountsAbout DWC Mechanical Since 1995, DWC Mechanical has proudly served commercial customers throughout Western New York and has recently expanded into the Tampa, Florida market. Our success is built on technical expertise, strong customer relationships, and a commitment to doing the job right. We believe great companies are built by great people, and we are committed to creating an environment where employees can grow professionally, develop their skills, and build rewarding careers. Ready to Take the Next Step? Whether you're an experienced service technician looking for a better opportunity or a skilled HVAC professional ready to advance your career, we'd love to speak with you.

Job DescriptionAbout the Role:Are you a foodie? Do you love thinking about what you are making for dinner? Battistoni Italian Specialty Meats has been around for 95 years and we are looking for someone to help maintain a clean environment for our artisan meat production facility. We make pepperoni, salamis and other artisan specialty meats. This year, the company was taken over by a new team that is focused on eliminating preservatives from everything we make. The energy in the building is pretty amazing. Cup and Char Pepperoni Inc is seeking a dependable, hardworking Sanitation Associate to join our team. This position is responsible for cleaning and sanitizing food production equipment, utensils, and facility areas to maintain a safe and sanitary food manufacturing environment. Responsibilities: • Clean and sanitize production equipment, machinery, and food contact surfaces according to established protocols, • Perform deep cleaning of processing floors, walls, drains, and facility areas throughout shifts, • Mix, handle, and apply cleaning chemicals and sanitizing solutions safely and correctly, • Follow GMP (Good Manufacturing Practices) and food safety regulations at all times, • Inspect and verify cleanliness of areas before and after production runs, • Remove waste, dispose of trash, and maintain sanitary conditions throughout the facility, • Document sanitation activities and report any maintenance or safety concerns to supervisorsRequirements:, • Prior experience in sanitation, janitorial, or food manufacturing environments preferred, • Knowledge of food safety standards, HACCP, and GMP guidelines is a plus, • Ability to handle and safely use industrial cleaning chemicals and sanitation equipment, • Must be able to stand, bend, and lift up to 50 lbs for extended periods in a fast-paced environment, • Reliable, punctual, and detail-oriented with a strong work ethic, • Ability to work flexible shifts, including early mornings, evenings, or weekends as needed, • Ability to follow written and verbal instructions and work effectively as part of a teamSchedule:, • Monday–Friday, 2:00 PM–10:30 PM About Us:Cup and Char Pepperoni Inc is a Buffalo, NY-based meat processing company proud to produce high-quality pepperoni products loved by customers across the region. We are committed to food safety, product excellence, and building a team that takes pride in every step of the production process. Our employees enjoy a stable work environment, a supportive team culture, and the satisfaction of being part of a company that truly delivers quality.

Job Description Job Title: Warehouse Associate – Material Handler Department: Warehouse Reports To: Warehouse Manager Job Status: Full-time FLSA Classification: Non-exempt Hours: 6 a.m. – 4:30 p.m. Monday – Thursday Location: Cheektowaga, NY (onsite) Tectran Manufacturing Inc. is an industry-leading manufacturer and marketer of air, hydraulic, and electrical systems for the transportation industry. The primary market focus includes the heavy-duty tractor-trailer and bus industries. Our commitment to quality and durability assures us a leading edge in product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to customer needs. Job Summary The candidate in this position is responsible for coordinating activities to move product throughout the warehouse and within the company’s computer software systems. The Material Handler is also responsible for ensuring that accuracy, quality, and efficiency are achieved. Responsibilities: • Load and unload trucks in staging areas as required, weigh LTL shipments, and stage large orders, • Stage raw material for production and ensure continuous replenishment, • Ensure all inventory movement is accurately recorded in the company system, • Organize stock bins and replenish shelves to ensure accuracy and efficiency for order pickers, • Assist order pickers by putting away large items received and pulling stock down from upper racking, • Maintain fork trucks, pallet jacks, or industrial trucks, including conducting and recording daily inspections, • Follow all company policies, complete all safety training required, and report any unsafe work practices and concerns, • Assist team members with projects or tasks assigned by manager Education & Experience: • In possession of a high school diploma or equivalent (preferred), • 2-5 years’ experience driving a forklift (preferred), • Experience in packaging and shipping, and using weight tools and equipment (preferred) Required Skills & Abilities: • Familiar with computer software programs, • Attention to detail, • Organized, • Works well with deadlines, • Good math and analytical skills, • Adapts well to change, • Works in close quarters with others – ability to be a team player, • Desire for a clean and safe work environment Safety Requirements: • Employee will be required to wear the provided PPE per the role requirements, • Follow site safety and any department-specific protocols, • Report safety hazards or potential safety hazards to the reporting Supervisor, • Attend company safety meetings Physical Requirements: • Ability to lift and/or carry up to 50 lbs often, • Ability to stand for long periods of time, • Must be able to frequently kneel, squat, and climb, • Must be able to walk the warehouse floor on a regular basis Perks: • Health, Dental, Vision, Life and AD&D, and Voluntary insurance coverages, • 401(k) program and company match, • Wellness program, • $500 referral bonus TECTRAN is an equal opportunity employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors. \nCompany Description Our Story Over a period of 50+ years, Tectran has become a manufacturer and marketer of air, hydraulic and electrical components and systems for the transportation equipment industry. Our primary market focus includes the heavy truck, trailer and bus industries though our continuous product line expansion has begun to draw us into other mobile equipment markets. Our primary mission is to supply products that offer maintenance, operating, security and safety solutions to equipment operators and to make these readily available on new equipment and for service needs through an extensive network of professional parts marketers across the continent. Our active participation in the industry’s major technical specification groups and our commitment to quality and durability assure leading edge product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to the needs of the end user. While we’re best known for our innovative tractor-trailer hook-up lines, Tectran offers a wide range of products enabling “one-stop” purchasing. In addition to our own unique items, we provide extensive interchanges to popular market brands and are constantly broadening our product offering and working with supplier partners to provide added convenience to our customers. Our Story\n\nOver a period of 50+ years, Tectran has become a manufacturer and marketer of air, hydraulic and electrical components and systems for the transportation equipment industry. Our primary market focus includes the heavy truck, trailer and bus industries though our continuous product line expansion has begun to draw us into other mobile equipment markets.\n\nOur primary mission is to supply products that offer maintenance, operating, security and safety solutions to equipment operators and to make these readily available on new equipment and for service needs through an extensive network of professional parts marketers across the continent.\n\nOur active participation in the industry’s major technical specification groups and our commitment to quality and durability assure leading edge product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to the needs of the end user.\n\nWhile we’re best known for our innovative tractor-trailer hook-up lines, Tectran offers a wide range of products enabling “one-stop” purchasing. In addition to our own unique items, we provide extensive interchanges to popular market brands and are constantly broadening our product offering and working with supplier partners to provide added convenience to our customers.

Job DescriptionIndustrial Electrician We are seeking an Industrial Electrician to join our team. This position is responsible for troubleshooting, repairing, installing, and maintaining electrical equipment. Responsibilities: • Troubleshoot and repair electrical systems, machinery, motors, controls, and production equipment., • Perform preventive and corrective maintenance on industrial equipment., • Install, wire, and modify electrical components, conduits, and control panels., • Read and interpret electrical schematics, blueprints, and technical drawings., • Diagnose equipment failures and work with production personnel to minimize downtime., • Maintain compliance with company safety policies and electrical codes., • Document maintenance activities and completed repairs.Qualifications:, • Experience working as an electrician in an industrial, commercial, manufacturing, or production environment., • Ability to read electrical schematics and blueprints., • Familiarity with lockout/tagout procedures and safe work practices., • Strong mechanical aptitude and problem-solving skills., • Ability to work independently and as part of a team.Schedule & Compensation:, • First shift hours (7:00AM-3:30PM, Monday through Friday), • Overtime opportunities available., • Competitive pay based on experience., • Benefits package available. Job Type & Location This is a Permanent position based out of Buffalo, NY. Pay and Benefits The pay range for this position is $22.00 - $40.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Permanent position based out of Buffalo, NY. Application Deadline This position is anticipated to close on Oct 23, 2026. Workplace Type This is a fully onsite position in Buffalo,NY. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionGTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safey I Quality I Customer Obsession I Speed I Agility Position Overview GTI Fabrication is seeking an Electrician to install, maintain, troubleshoot, and repair electrical systems and components across manufacturing operations. The Electrician I \u007C Journeyman Electrician will support production equipment, plant electrical systems, and infrastructure to ensure safe, reliable, and efficient operation. This role will also support manufacturing operations tied to modular data center builds, electrical integration areas, power distribution equipment, and system-level production environments. The Electrician I \u007C Journeyman Electrician must have strong knowledge of industrial electrical systems, the ability to read blueprints and schematics, and hands-on experience working in a fast-paced industrial environment. Key Responsibilities Electrical Installation & System Support • Install, maintain, and enhance electrical systems and components including wiring, lighting, panels, breakers, conduit, disconnects, and control systems, • Perform preventative maintenance on electrical systems, equipment, and infrastructure to ensure reliability and uptime, • Calibrate equipment to provided specifications and verify proper operation, • Support power distribution systems serving modular data center production, assembly lines, and manufacturing equipment Troubleshooting & Repair • Inspect, test, and diagnose issues with electrical systems and components, • Troubleshoot electrical problems and perform timely repairs to minimize downtime, • Test electrical systems and components to verify proper functionality after repair, • Respond quickly to equipment failures impacting production schedules or plant operations Blueprints, Codes & Standards • Perform all work in accordance with electrical codes, OSHA requirements, safety standards, and company procedures, • Read and interpret electrical blueprints, schematics, one-lines, panel layouts, and diagrams, • Ensure installations and repairs meet required specifications and compliance standards, • Support lockout/tagout practices and safe energized work protocols where permitted Documentation & Inventory • Complete required documentation for repairs, maintenance activities, PM records, and service logs, • Maintain accurate records of work performed, downtime events, and system performance, • Ensure adequate inventory of electrical supplies, spare parts, tools, and replacement components, • Support MRO inventory planning for electrical consumables and critical spare parts Safety & Operational Support • Follow OSHA safety standards and internal safety protocols at all times, • Support safe operation of electrical systems across the facility, • Assist production teams by ensuring electrical systems support manufacturing operations, • Help maintain uptime for welding, fabrication, paint, assembly, testing, and electrical integration areas Continuous Improvement • Identify recurring failures and support Root Cause Analysis using structured problem-solving methods, • Support improvements to reliability, preventative maintenance, energy efficiency, and equipment uptime, • Participate in Lean Manufacturing, 5S, and Continuous Improvement initiatives Requirements • 3–5 years of experience as an Electrician, Industrial Electrician, or Journeyman Electrician, • Strong ability to read and interpret electrical blueprints, schematics, diagrams, and one-lines, • Working knowledge of electrical theory, materials, controls, motors, and industrial equipment, • Experience using hand and power tools associated with electrical work, • Ability to troubleshoot and repair electrical systems in an industrial environment, • Ability to lift, carry, push, and pull up to 50 pounds, • Ability to bend, climb, squat, reach, and kneel, • Valid driver’s license Preferred Qualifications • Completion of an electrician apprenticeship, technical school, or trade program, • Journeyman Electrician license preferred, • Experience in industrial manufacturing, modular manufacturing, or contract manufacturing environments, • Familiarity with preventative maintenance programs, electrical calibration, and equipment reliability systems, • Experience supporting modular data center infrastructure, power systems, or electrical integration operations, • PLC troubleshooting or controls experience preferred, • Willingness to work overtime as needed Benefits & Perks GTI Energy offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. #ZR GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy PolicyTerms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. Company DescriptionGTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job DescriptionProduction Technician 1st Shift | Amherst, NY $1,500 Sign-On Bonus 7:00 AM - 3:30 PM | Optional Overtime Looking for a hands-on manufacturing role in a clean, climate-controlled environment? We're hiring Production Technicians to assemble, test, and inspect high-precision sensor products used in aerospace, automotive, industrial automation, and advanced manufacturing industries. What You'll Do • Assemble, test, calibrate, and inspect precision electronic products, • Follow work instructions, blueprints, and engineering drawings, • Perform soldering, mechanical assembly, and adhesive bonding, • Use microscopes and small hand tools for detailed assembly work, • Conduct quality inspections and functional testing, • Operate basic production and calibration equipment, • Document work performed and report quality issues as neededWhat We're Looking For, • High School Diploma or GED, • Strong attention to detail, • Ability to work with small, precision components, • Good hand dexterity and fine motor skills, • Ability to follow written instructions and procedures, • Comfortable working in a quality-focused manufacturing environmentPreferred Experience, • Soldering electronic components, • Electronics or sensor manufacturing, • Working with oscilloscopes or testing equipment, • Experience in regulated manufacturing environments, • Inspection, testing, or calibration experienceWhy Work Here?, • $1,500 sign-on bonus, • 1st shift schedule, • Full medical benefits, • Optional overtime opportunities, • Extensive hands-on training, • Weekly variety through custom projects, • Clean, climate-controlled facility, • Team-oriented environment with long-tenured employees, • Employee appreciation events and strong company cultureWork Environment, • Precision electronics manufacturing facility, • Climate-controlled and well-maintained workspace, • ISO-regulated production environment, • Individual assembly workstations, • ESD-controlled manufacturing setting, • Supportive supervision and trainingGreat Fit For: Someone with strong attention to detail, steady hands, and an interest in electronics, assembly, or quality inspection. This role is ideal for candidates looking to develop technical skills in a clean manufacturing environment with excellent training and long-term career potential. Job Type & Location This is a Contract to Hire position based out of Amherst, NY. Pay and Benefits The pay range for this position is $20.83 - $22.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Amherst, NY. Application Deadline This position is anticipated to close on Nov 4, 2026. Workplace Type This is a fully onsite position in Amherst,NY. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description GTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safety I Quality I Customer Obsession I Speed I Agility Role Overview GTI Fabrication is launching a new Service & Field Operations business unit to deliver on-site installation, aftermarket maintenance, repair, and technical field support across our equipment product lines. The Vice President of Service & Field Operations will own the strategy, go-to-market execution, organizational scale, operational infrastructure, and full P&L accountability for this business unit. This is a "0-to-1" startup leadership role within an established and rapidly growing manufacturer. Partnering closely with executive leadership, the VP will transform service delivery into a high-margin, scalable growth engine and a core competitive differentiator for GTI. Key Responsibilities Business Strategy, Go-To-Market & P&L Ownership Strategy & GTM Execution: Define market demand, customer segmentation, and competitive positioning across GTI’s manufacturing portfolio; establish target verticals, service tiers, pricing models, and service level agreements (SLAs). P&L & Commercial Integration: Build and manage the service P&L to achieve revenue growth, gross margin expansion, and profitability targets; partner with Business Development to integrate service packages, warranties, and SLAs into new equipment contracts. Capability Roadmap: Determine in-house vs. third-party partner network capabilities and drive multi-year geographic and service footprint expansion. Field Operations & Infrastructure Operating Model: Build the operational delivery model from scratch, including field service playbooks, dispatch systems, work order management, fleet logistics, tooling, and parts inventory. Quality & Safety Governance: Establish site access protocols, risk liability protections, customer sign-off procedures, and strict field safety and quality standards. Facilities & Logistics: Implement required support infrastructure, including regional service centers, mobile units, and support equipment. Team Building & Organizational Leadership Talent Strategy: Partner with HR/TA to recruit, onboard, and structure a high-performing field organization, directly hiring service sales managers, operations coordinators, and frontline technicians. Training & Development: Create technical training curricula covering product diagnostics, safety protocols, and customer service to support career progression and technical competency. Culture & Performance: Drive a customer-centric, safety-first culture centered on rapid response times, first-call resolution, and operational excellence. Technology, Analytics & Feedback Loops Systems Integration: Select and deploy Field Service Management (FSM), CRM, mobile delivery, and remote diagnostic platforms, integrating them with GTI’s ERP and finance systems. Cross-Functional Feedback: Establish closed-loop reporting systems to route field installation issues, quality trends, and customer insights back to Engineering and Operations for product improvement. KPI Management: Define and track key performance indicators, including CSAT/NPS, SLA compliance, commissioning quality, first-time fix rate, and customer lifetime value. Key Success Measures • Successful startup and launch of the service business unit within 6–12 months, achieving early customer acquisition and revenue realization., • Attainment of defined service revenue and gross margin targets, establishing a clear path to P&L profitability within 24 months., • Establishment of a scalable field operating model, robust system integrations, and a high-performing technical field team., • High customer retention, SLA compliance, and strong CSAT/NPS benchmark scores.Qualifications Required • 15+ years of progressive experience in field service, aftermarket operations, or customer support within an industrial equipment OEM or heavy manufacturing environment., • 5+ years in an executive leadership role (Director, Sr. Director, or VP) with direct P&L responsibility., • Demonstrated track record of launching, scaling, or transforming a service line from initial concept to commercial profitability., • Deep functional expertise in field service execution, technician network management, spare parts logistics, service pricing, and SLA architecture., • Strong financial acumen with proven experience managing P&L statements, pricing strategy, and capital allocations., • Proven track record recruiting, structuring, and leading technical field teams. Preferred • Experience establishing field infrastructure, such as regional service centers or mobile technician networks.

Job Description Are you looking for a rewarding career where your contributions truly matter? At Uniland, we offer a culture focused on people, growth, and community. We foster an environment that empowers team members at all levels, supports professional development, encourages volunteerism, and values collaborative innovation - so you can make a meaningful impact while building your future with us. Who we are: Uniland is a leading family-owned and operated real estate development firm headquartered in Amherst, NY. For more than five decades, we’ve built a reputation for excellence in commercial real estate, offering a full range of services including development, construction, leasing, property management, and more. Our commitment to quality, innovation, and long-term relationships sets us apart in the industry. At Uniland, we value integrity, teamwork, and continuous improvement—and we’re proud to offer a workplace where associates can grow their careers while making a lasting impact on the communities we serve. Uniland is a caring employer, offering comprehensive, high-quality benefits to help our associates maintain a healthy, well-balanced lifestyle. Our associates enjoy: • Multiple medical plan options including a high deductible, low-cost HSA health plan with a generous employer contribution, • Company-sponsored (paid) Life Insurance and Long-Term Disability, • Comprehensive optional benefits such as Dental, Vision, Supplemental Life and Short-Term Disability, Legal/ID Protection, and Accident and Critical Illness Insurance, • Paid time off options, 8 paid company holidays, Voluntary Time Off (VTO), bereavement leave, jury duty leave, parental leave, voting leave, and other forms of paid leave as required by applicable law or regulation, • Retirement planning through the Company’s 401(k) with employer match Candidates must have a valid driver’s license to meet the essential functions of the job. JOB SUMMARY The HVAC Maintenance Mechanic is a skilled professional responsible for performing a wide range of HVAC, mechanical, and general maintenance tasks in support of Uniland Maintenance Company, Inc. and the Property Management Department. This role ensures safe, efficient, and fully operational facilities across Uniland’s portfolio and third-party managed sites. Responsibilities include responding to service requests, conducting preventive maintenance, and addressing emergencies. A primary focus of this role is ensuring operational performance and reliability of heating, ventilation, and air conditioning systems. With a strong emphasis on technical excellence, customer service, and professionalism, the HVAC Maintenance Mechanic upholds Uniland’s reputation for high-quality property management and tenant satisfaction. ESSENTIAL FUNCTIONS • Responds promptly and professionally to emergency, routine, curative, and preventive maintenance work orders, ensuring timely and thorough completion., • Performs skilled maintenance, diagnostics, and repairs on a variety of HVAC systems, including rooftop units, split systems, and heat pumps., • Identifies and resolves HVAC-related issues such as refrigerant leaks, electrical/control failures, mechanical malfunctions, and airflow problems, ensuring minimal disruption to tenants and operations., • Completes general facility maintenance tasks as needed, including basic plumbing, electrical, lighting, carpentry, and general repairs to support building operations., • Conducts property and equipment inspections during site visits; proactively identifies and initiates necessary maintenance or repair actions to uphold facility standards., • Maintains a clean, organized, and safe work environment; adheres to all safety protocols, regulatory standards, and company policies. Ensures full cleanup of work areas after each task., • Communicates professionally and courteously with tenants, vendors, and internal teams, demonstrating respect, discretion, and a commitment to exceptional service., • Accurately documents maintenance activities through work orders, refrigerant logs, equipment service records, and other required reports in accordance with compliance standards., • Operates and maintains HVAC tools and diagnostic equipment; reports any tools or equipment needing repair or replacement., • Drives company vehicles between various job sites in compliance with traffic laws and company policies; maintains vehicle cleanliness and readiness., • Participates in after-hours on-call rotation; responds to maintenance and HVAC-related emergencies in alignment with department protocols. OTHER DUTIES • Purchases and tracks HVAC and maintenance-related materials in accordance with company purchasing procedures and budget guidelines., • Assists with property readiness tasks such as inspections, turnover work, and coordination with the Property Management and Sales teams., • Engages in ongoing professional development and training to stay current with HVAC technologies, refrigerant regulations, and building maintenance best practices., • Actively participates in and contributes to any/all initiatives when requested and/or required. EDUCATION & EXPERIENCE • High School Diploma or GED required., • A minimum of three years of experience in HVAC installation, maintenance, and repair; general building maintenance experience also required., • Commercial property or multi-tenant facility experience strongly preferred., • At a minimum, OSHA 10-Hour Safety Certification is required or must be obtained., • EPA Section 608 Certification Universal required., • Completion of an HVAC trade school program or formal apprenticeship preferred., • Valid driver's license with a clean driving record required. KNOWLEDGE, SKILLS & ABILITIES • Strong working knowledge of building systems, including HVAC, plumbing, electrical, carpentry, and general facility maintenance., • In-depth understanding of commercial HVAC systems, including refrigeration cycles, thermostatic controls, variable air volume (VAV) systems, and rooftop units., • Comprehensive understanding of safety standards, building codes, refrigerant handling procedures, and best practices for HVAC and general maintenance work., • Familiarity with preventive maintenance software systems; experience with platforms such as Yardi is preferred., • Proficiency with, or the ability to learn, Building Management Systems (BMS), used to monitor and control HVAC equipment., • Proficient in the use of computers and mobile devices for work order management, timekeeping, and internal communication., • Experienced in using HVAC-specific tools such as manifold gauges, recovery machines, vacuum pumps, and electrical testers., • Skilled in diagnosing and resolving maintenance issues, particularly HVAC-related problems, with a focus on cost-effective and practical solutions., • Proficient in the safe operation of hand tools, power tools, diagnostic equipment, and general maintenance supplies., • Effective time management and organizational skills, with the ability to adapt to changing priorities., • Professional communication and interpersonal skills, with a strong emphasis on tenant and customer service., • Ability to perform maintenance and repair work across a variety of property types, including office, industrial, retail, and residential spaces., • Capable of working independently and managing tasks across multiple sites with minimal supervision., • Ability to read, interpret, and apply information from technical manuals, HVAC schematics, and diagrams., • Ability to accurately document work performed, complete required reports, such as refrigerant logs, and follow both written and verbal instructions., • Comfortable using tablets, mobile apps, or computer systems for receiving and managing tasks., • Demonstrates strong initiative, reliability, and a commitment to maintaining clean, safe, and functional properties., • Maintains professionalism, confidentiality, and represents the company with integrity in all interactions., • Willingness to work flexible hours and respond to after-hours emergency calls as part of an on-call rotation. PHYSICAL DEMANDS & WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this position at multiple commercial properties. Reasonable accommodation may be made to enable individuals with disabilities to safely perform the essential functions. • Frequently required to stand, walk, bend, squat, crouch, kneel, twist, and reach (including overhead) for extended periods while performing repairs and preventive maintenance across multiple sites., • Regularly lifts, carries, pushes, and pulls tools, equipment, and materials; frequently up to 50 pounds and occasionally greater weights with assistance, carts, dollies, or other mechanical means., • Must be able to safely use and climb ladders of various classifications (including step ladders, straight/single ladders, extension ladders, and fixed ladders) and stairs; work from elevated surfaces (including roofs, lifts, and mezzanines); and access mechanical rooms, basements, crawlspaces, and other restricted or confined areas as job duties require., • Requires frequent use of hands and fingers for repetitive tasks such as gripping, pinching, turning, and manipulating small parts while operating hand and power tools, test instruments, valves, and controls; regular use of a phone/tablet for work orders and communication., • Visual acuity (near and distance) and hearing sufficient to diagnose equipment issues, read meters/gauges/prints, interpret written instructions and safety signage, and communicate effectively with tenants, vendors, and coworkers., • Work is performed across multiple commercial properties in varied environments including tenant-occupied spaces, common areas, loading docks, parking lots, rooftops, mechanical/electrical rooms, and outdoor areas; work may occur in all weather conditions., • Regular exposure to conditions typical of commercial maintenance work, which may include moving mechanical parts, electrical hazards, work at heights, confined spaces, vibration, dust, fumes, odors, cleaning chemicals/solvents, and moderate to high noise levels; required to wear appropriate PPE and follow all safety procedures., • Regularly travels between properties during the workday and operates a company vehicle to respond to work orders and emergencies; must be able to safely drive in varying traffic and weather conditions and comply with all driving safety protocols., • Must maintain a valid driver’s license and an acceptable driving record in accordance with company policy., • May be required to work evenings, weekends, and holidays and to participate in an on-call rotation; must be able to respond promptly to emergency calls, which may require travel to various properties outside of normal business hours., • Ability to sit for extended periods while driving and to frequently enter/exit a vehicle and carry tools and materials into and through commercial buildings, including navigating stairs and uneven surfaces. Uniland Development Company is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Protected veterans and individuals with disabilities are encouraged to apply. Applicants must be legally authorized to work in the United States at the time of hire. No visa sponsorship is available for this position.

Job Description Are you looking for a career with a business that places value on their employees? Do you want to work where you are treated as family and not just a number? Then Sun Environmental is the place for you! The team at Sun has a passion for their work which surpasses most in the industry. Throughout the company history, our record for safety, quality, and service has made Sun Environmental Corp. a top competitor in New York. The company is continuously expanding. Completing projects throughout New York State. Wherever the company’s services are needed, we will go. We’re currently seeking an Asbestos Abatement Supervisors for our branches in Albany, Syracuse, Rochester and Buffalo, NY to assist with asbestos abatement, site-remediation, equipment decontamination, and handling of asbestos materials. Job Summary The Supervisor must be able to manage all aspects of remediation & abatement. This is a working supervisor position; you will be assisting the workers on site as well as ensuring all safety, industry and regulatory standards are met and exceeded. The Asbestos Handlers must hold a NYS DOL Asbestos License. Job Responsibilities • Understand and enforce project’s detailed scope of work to maintain strict compliance with contract documents, project schedules, and corporate policies and procedures., • Direct and supervise employees to maintain competent completion of their duties., • Correct completion of all job-specific, employee-related paperwork including safety, toolbox talks, daily timesheets, pictures, etc., • Ensure that the crew is working safely during all phases of performing their job duties., • Participate with the training of newly hired employees: Following training guidelines and realizing the importance of a well-trained employee to the success of the company/team morale., • Responsible for equipment and materials on the job site., • Perform job duties in projects not related in asbestos abatement, if needed. MUST HAVE QUALIFICATIONS. • 2-3 years of experience supervising remediation and/or industrial maintenance projects., • Current Asbestos Supervisor License, • High School Diploma or GED (or equivalent reading, writing and reasoning skills), • A valid driver's license, • Ability to manage time efficiently, • Ability to maintain professionalism toward customers and co-workers, • Ability to perform work inside areas of varying dimensions., • Ability to follow directions; read/speak and understand English; read and understand common danger placards / labels and hazardous warning literature including site safety plans., • This position requires varying levels of physical activities and physical extremes such as long periods of standing, walking, crouching, use of hands, and heavy lifting of up to 50 pounds or more. Preferred Qualifications • 40-hr HAZWOPER certification., • Confined Space Entry certification Pre-Employment Requirement Successful completion of a pre-employment background and substance screening process including, but not limited to, employment verifications, criminal search and Motor Vehicle Record (MVR) search as well continued verifications throughout employment to ensure that all records meet company policy standards. It’s about give and take. If you put in the work, this is what you get: • A competitive salary and annual increases., • Bonuses, • Personal growth leading to promotions., • Health, Dental and Vision Insurance, • Retirement Savings Plan, • Paid Time Off, • Yearly Clothing and Boot Allowances Benefits: • 401(k), • Dental & vision insurance, • Disability insurance, • Health insurance, • Paid time off, • Paid sick time, • Life insurance, • Employee referral program, • Health savings account Join our team today! Sun Environmental Corp. is an equal opportunity employer, and as such, all qualified applicants will receive consideration for employment without regard to race, color, religion, age, genetic information, ancestry, sex, sexual orientation, gender identity, disability, status as a protected veteran, or national origin.

Job Description TEXT "GOMILES" to 720-459-4415 to APPLY! GO Car Wash is one of the fastest growing car wash operators in the United States, with locations in multiple states from coast to coast. And we keep adding more! If you have a knack for fixing things and a passion for ensuring everything runs smoothly, then join us as a Maintenance Technician! As a Maintenance Technician at GO Car Wash, you’ll be responsible for installing, repairing, and servicing equipment at multiple car washes. You’ll work with your leader and site managers to ensure the day-to-day maintenance and equipment is maintained while managing costs, necessary to give our customers a convenient, consistent, exceptional car wash experience. For you to be successful, we’re looking for: • 2+ years’ experience in industrial/ commercial equipment troubleshooting., • Experience with air compressors, electrical, 3 phase motors, VFDs, motor controls, hydraulics, pluming, and pneumatics., • Demonstrate proficiency in the safe use of power tools and heavy equipment., • Forklift, welding and electrical experience and/or certification preferred, but not required., • Car wash experience preferred, but not required., • High School Diploma or Equivalent You must also be able to: • Deliver excellent customer service, • Communicate clearly, engage, and lead others by example, • Organize time and work to effectively and efficiently complete varying responsibilities, • Comply with all safety policies, procedures, and PPE requirements Base wage is starting at $30 per hour. We also offer competitive health, 401(k), and paid time off benefits, plus free car washes, as well as an opportunity to grow your career with us You will be paid for commute, drive time along with a company provided vehicle, fuel card and power tools. Offer will depend on location and level of job-related knowledge, skills, abilities, and experience. To learn more about us, go to www.gocarwash.com (http://www.gocarwash.com). NOTE: You'll be required to complete a satisfactory criminal background and motor vehicle check after being hired for this job. All qualified applicants will be considered for employment without regard to age, race, color, national origin, religion, gender, gender identity, sexual orientation, disability or veteran status, or any other actual or perceived basis protected by law. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.

Job Description CSI Sands (N.E.) operates state of the art processing facilities to produce industrial silica sand products in Brevort, MI, Buffalo, NY and Cleveland, OH. We are currently searching for a Maintenance Technician to complement our team in Buffalo, NY. Reporting to the Buffalo Plant Maintenance Manager, the Maintenance Technician will be responsible for: • Abiding by and enforcing compliance with safety rules, policies, and procedures., • Repairing, maintaining, installing production equipment., • Troubleshooting machine problems and making necessary repairs., • Performing preventive maintenance following standards and schedules on scales, equipment and conveyors. This includes lubrication, adjustments, and cleaning., • Recommending improvements and modifications to production equipment and machines., • Maintaining equipment repair history records., • Determining the cause of breakdowns and providing improvement recommendations to reduce downtime and costs., • Performing general plant maintenance duties., • Other duties as assigned. Skills and Requirements: · Minimum 2 to 5 years solid experience as a Mechanical Technician. · Experience in a manufacturing or industrial setting is preferred. · Must have own tools and vehicle. · Ability to read and understand drawings, blueprints, and schematics. · Ability to organize, plan daily tasks, and make decisions with minimal supervision. · Ability to utilize the Microsoft Office suite. The hours of work will be flexible with weekends and nights as based on business needs. We encourage all who are qualified and interested to apply in confidence; however, only those in consideration will be contacted.

Job DescriptionJob Summary MacLean-Fogg is hiring a Maintenance Technician at our Buffalo, New York manufacturing facility. In this role, you will maintain, troubleshoot, and repair production machinery, equipment, and support systems across mechanical, electrical, hydraulic, and pneumatic systems. This position supports 2nd and 3rd shift operations and offers continued development through the maintenance training program. Location: Buffalo, NY Work Arrangement: On-site Schedule: 2nd or 3rd Shift Pay: $26.88/hour Other Compensation: 5% shift differential for 2nd Shift; 6% shift differential for 3rd Shift Employment Type: Full-time / Hourly Overtime: Occasional overtime may be required. What You'll Do as a Maintenance Technician Maintain a safe, clean work area in accordance with 6S standards and report unusual or unsafe conditions to your supervisor. Read and interpret electrical, hydraulic, pneumatic, and mechanical schematics and component drawings to complete repairs with minimal guidance. Safely start, stop, and shut down production machinery, equipment, and support systems as needed to perform maintenance work. Maintain and repair production machinery and equipment, including basic electrical and hydraulic repairs, clutch and bearing repairs, and basic gas and electric welding. Perform more advanced repairs with guidance. Diagnose machine malfunctions, identify equipment, material, and tooling problems, and recommend corrective or preventive actions. Build and modify part chutes and support building and grounds maintenance, including seasonal outdoor work such as debris removal, snow removal, and salting. Maintain accurate documentation and communicate effectively across shifts and departments, including Quality, Engineering, and Maintenance. Follow applicable Quality Management System procedures and work instructions and use Visual Factory and JIRA as required. Provide orientation support when requested by your supervisor and contribute to effective coordination across the maintenance team. What You'll BringRequired Qualifications Ability to use shop math appropriate for industrial maintenance work. Ability to read and interpret electrical, hydraulic, pneumatic, and mechanical schematics and component drawings. Working knowledge of common tools used in industrial maintenance and repair. Basic electrical and hydraulic repair skills, with the ability to perform more advanced work with guidance. Basic gas and electric welding skills. Ability to perform clutch and bearing repairs. Ability to troubleshoot and diagnose production equipment and machine malfunctions with guidance. Ability to maintain clear documentation and communicate effectively across shifts and departments. Work Environment & Physical Requirements This role involves hands-on maintenance and repair of production machinery, equipment, and support systems within a manufacturing facility. Work may include electrical and hydraulic repair, welding, clutch and bearing repair, fabrication or modification of part chutes, and building and grounds maintenance. The position also includes seasonal outdoor responsibilities such as sweeping, removing trash, debris and leaves, clearing snow using a snow plow, snow blower or shovel, and applying salt. The physical requirements described above represent those needed to perform the essential functions of the position, with or without reasonable accommodation. Benefits Eligible employees across MacLean-Fogg and its affiliated companies have access to a comprehensive benefits program designed to support health, financial well-being, time away, and development. This position is eligible for benefits that include: Medical, dental, and vision coverage 401(k) with company match and potential profit sharing Paid time off and paid holidays Health Savings Account contributions for eligible plans Company-paid life insurance and short-term disability coverage Paid parental leave Employee Assistance Program and mental health resources Virtual healthcare resources Tuition reimbursement and development opportunities Additional wellness, financial, and employee programs Benefits are subject to applicable plan terms and eligibility requirements. Explore our full benefits and interactive resources: https://explore.benefits.macleanfogg.app Pre-Employment Requirements After a conditional offer, this position requires a pre-employment drug screen. Testing and employment decisions are administered consistent with applicable law. About MacLean-Fogg MacLean-Fogg is a fourth-generation, family-owned American manufacturing company headquartered in Mundelein, Illinois. Founded in 1925, we design and manufacture engineered components and solutions for automotive and industrial markets. Our portfolio includes MacLean-Fogg Component Solutions, OMCO, Mallard Manufacturing, and Threadstrong. Across our companies, we share a commitment to Integrity, People, Customers, and Stewardship while investing in our people, manufacturing capabilities, customers, and communities. Equal Employment Opportunity & Accommodations MacLean-Fogg and its affiliated companies are equal opportunity employers. We provide equal employment opportunities to qualified applicants and employees without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, ancestry, age, disability, genetic information, military or veteran status, marital status, or any other characteristic protected by applicable law. If you need a reasonable accommodation to apply, complete an assessment, or participate in the hiring process, contact careers@macleanfogg.com. #ind-nonexempt

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Maintenance Mechanic installs, maintains, and repairs machinery, equipment, physical structures, pipes, electrical and hydraulic systems by performing the following duties. Must be available for all shifts (1st, 2nd & 3rd). Must also be available on weekends and holidays. Sign-on Bonus: $10,000 ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Listens for unusual sound from machines or equipment to detect malfunction and discuss machine operation variations with operators, supervisors or other maintenance workers to diagnose problem and repair machine., • Shuts down machine or equipment and "Locks Out" all energy sources after starting repairs. Installs new or repaired parts. Tests to ensure proper operation., • Cleans and lubricates shafts, bearings, gears, and other parts of machinery according to company procedures or schedules., • Installs and repairs electrical wiring and electrical and/or electronic components on machinery and equipment., • Lays out, assembles, installs, repairs and maintains pipe systems and related hydraulic and pneumatic equipment, repairs and replaces gauges, valves, pressure regulators, and related equipment., • Repairs and maintains physical condition of facility. e.g.: May have to fabricate and/or repair counters, benches, walls, partitions, and other structures as deemed necessary., • Installs, programs and repairs automated machinery and equipment such as, programmable controllers, pumps, separators, homogenizers, packaging machines, compressors, refrigeration systems and other equipment as needed and trained to repair., • Sets up and operates machine tools such as lathe, grinder, drill, to repair or fabricate machine parts, jigs, fixtures and tools., • Operates cutting torch or welding equipment to cut or join metal parts. QUALIFICATION REQUIREMENTS: • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required., • Ability to read and interpret work orders, safety rules, operating and maintenance instructions and procedure manuals. Ability to fill out routine reports and correspondence. Ability to speak effectively and convey information to other employees., • Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. EDUCATION and/or EXPERIENCE: • High school diploma or general education degree (GED) or one to three years related experience and/or training or equivalent combination of education and experience. Must be a minimum of 18 years of age. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • While performing the duties of this job the employee is regularly required to walk, stand, use hands to finger, handle, or feel objects, tools, or controls, reach with hands and arms above shoulder height, climb or balance, stoop, kneel, crouch, talk and hear and taste and smell. The employee is occasionally required to sit., • The employee may have to get on top of machinery as well as crawling under machinery., • The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 55 pounds, and occasionally lift and/or move up to 100 pounds. With other mechanics may have to occasionally lift parts in excess of 100 pounds., • Specific vision abilities required by this job include close, distance, color and peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job., • While performing the duties of this job the employee regularly works near moving mechanical equipment. The employee often works in high, precarious places and in outside weather conditions. Is occasionally exposed to fumes or airborne particles and cleaning chemicals. Personal protective Equipment (PPE) must be worn per company policies., • The noise level in the work environment is usually moderate. Hearing protection may be required with some jobs. EARNING POTENTIAL & CERTIFICATION INCENTIVES: Base pay starting at $28.53–$31.53/hr., with total potential earnings up to $42.53/hr. Earn more as you grow: Up to $11/hour in skill-based incentives for qualifying certifications and licenses. Employees may increase their hourly rate by holding, earning, or maintaining the following certifications and licenses: Certification for Ammonia Refrigeration License for Boiler, First Class or Higher License for Industrial Electrical Certification for PLC Programming Operation and Trouble Shooting HTST Respirator Instrumentation and Control Technician Upstate Niagara Cooperative supports ongoing training and certification development to help employees grow their skills and maximize their earning potential. *The hourly rate as indicated in the CBA. The posted pay rate reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Candidates must have a valid driver’s license to meet the essential functions of the job. JOB SUMMARY The Maintenance Mechanic is responsible for delivering skilled maintenance and repair services in support of Uniland Maintenance Company, Inc., and the Property Management Department. This role ensures safe, functional, and well-maintained properties across both Uniland’s portfolio and third-party managed properties, by responding to service requests, completing scheduled preventive maintenance, and promptly addressing emergencies. The Maintenance Mechanic plays a key role in maintaining building systems, supporting tenant satisfaction, and representing Uniland with professionalism, technical expertise, and a strong commitment to quality service. ESSENTIAL FUNCTIONS • Responds promptly to all maintenance requests, including emergency, routine, curative, and preventive work orders with professionalism and thoroughness., • Travels between multiple properties to perform skilled maintenance and repairs on a variety of building systems, such as HVAC, plumbing, electrical, and general facilities., • Diagnoses and resolves maintenance issues accurately, ensuring repairs are completed timely with minimum disruption to tenants and business operations., • Maintains a clean and safe work environment, including thorough cleanup of work areas after each task, while adhering to all safety standards, regulations, and company policies., • Monitors property conditions during site visits and proactively reports or initiates service requests for any needed repairs or improvements., • Communicates professionally and courteously with tenants, vendors, and internal teams while maintaining confidentiality and upholding Uniland’s commitment to high-quality service., • Accurately completes documentation, including work orders, timecards, service logs, and other required reports., • Participates in after-hours on-call coverage and responds to emergency maintenance requests in accordance with departmental protocols., • Properly uses, secures, and maintains company tools, equipment, and inventory; promptly reports any repair or replacement needs. OTHER DUTIES • Operates company vehicles in compliance with all traffic laws and company policy; ensures vehicles remain clean, organized, and road-ready condition., • Actively participates in and contributes to any/all initiatives when requested and/or required., • Participates in ongoing training and professional development to stay current with evolving building systems, codes, and industry best practices., • Supports overall property condition by assisting with routine inspections, preparing vacant units for occupancy, and coordinating with the Property Management and Sales teams to ensure smooth operations., • Procures maintenance supplies as needed, following company procedures and ensuring accurate documentation of costs. EDUCATION & EXPERIENCE • High School Diploma or general education degree required., • A minimum of three years of experience in general building maintenance or a related skilled trade (e.g., HVAC, plumbing, electrical)., • Experience working in commercial, multi-tenant or property management environments preferred., • At a minimum, OSHA 10-Hour Safety Certification is required or must be obtained., • Valid driver's license with a clean driving record required. KNOWLEDGE, SKILLS & ABILITIES • Strong working knowledge of building systems, including HVAC, plumbing, electrical, carpentry, and general facility maintenance., • Strong understanding of applicable safety standards, building codes, and industry best practices for facility maintenance., • Familiarity with preventive maintenance software systems; experience with platforms such as Yardi is preferred., • Basic knowledge of computers and mobile devices for managing work orders, timekeeping, and communication., • Proficient in the safe and effective use of hand tools, power tools, diagnostic instruments, and general maintenance equipment., • Strong troubleshooting and diagnostic skills with the ability to implement practical, timely, and cost-effective solutions., • Strong communication and interpersonal skills with a focus on professionalism and customer service., • Effective time management and organizational skills with the ability to prioritize multiple tasks in a fast-paced work environment., • Ability to perform work across a variety of property types, including office, industrial, retail, and residential environments., • Ability to accurately complete documentation, maintain service records, and follow both written and verbal instructions., • Ability to work independently and manage responsibilities across multiple locations with minimal supervision., • Demonstrates initiative, reliability, and a strong commitment to maintaining clean, safe, and fully operational properties., • Maintains confidentiality when handling sensitive information and represents the company with integrity and professionalism., • Willingness to work flexible hours and respond to emergency calls as part of an on-call rotation. PHYSICAL DEMANDS & WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this position at multiple commercial properties. Reasonable accommodation may be made to enable individuals with disabilities to safely perform the essential functions. • Frequently required to stand, walk, bend, squat, crouch, kneel, twist, and reach (including overhead) for extended periods while performing repairs and preventive maintenance across multiple sites., • Regularly lifts, carries, pushes, and pulls tools, equipment, and materials; frequently up to 50 pounds and occasionally greater weights with assistance, carts, dollies, or other mechanical means., • Must be able to safely use and climb ladders of various classifications (including step ladders, straight/single ladders, extension ladders, and fixed ladders) and stairs; work from elevated surfaces (including roofs, lifts, and mezzanines); and access mechanical rooms, basements, crawlspaces, and other restricted or confined areas as job duties require., • Requires frequent use of hands and fingers for repetitive tasks such as gripping, pinching, turning, and manipulating small parts while operating hand and power tools, test instruments, valves, and controls; regular use of a phone/tablet for work orders and communication., • Visual acuity (near and distance) and hearing sufficient to diagnose equipment issues, read meters/gauges/prints, interpret written instructions and safety signage, and communicate effectively with tenants, vendors, and coworkers., • Work is performed across multiple commercial properties in varied environments including tenant-occupied spaces, common areas, loading docks, parking lots, rooftops, mechanical/electrical rooms, and outdoor areas; work may occur in all weather conditions., • Regular exposure to conditions typical of commercial maintenance work, which may include moving mechanical parts, electrical hazards, work at heights, confined spaces, vibration, dust, fumes, odors, cleaning chemicals/solvents, and moderate to high noise levels; required to wear appropriate PPE and follow all safety procedures., • Regularly travels between properties during the workday and operates a company vehicle to respond to work orders and emergencies; must be able to safely drive in varying traffic and weather conditions and comply with all driving safety protocols., • Must maintain a valid driver’s license and an acceptable driving record in accordance with company policy., • May be required to work evenings, weekends, and holidays and to participate in an on-call rotation; must be able to respond promptly to emergency calls, which may require travel to various properties outside of normal business hours., • Ability to sit for extended periods while driving and to frequently enter/exit a vehicle and carry tools and materials into and through commercial buildings, including navigating stairs and uneven surfaces. Uniland Development Company is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Protected veterans and individuals with disabilities are encouraged to apply. Applicants must be legally authorized to work in the United States at the time of hire. No visa sponsorship is available for this position.

Job DescriptionMaintenance Technician Buffalo, NY | 1st Shift | 7:00 AM - 3:30 PM Why Work Here? Comprehensive Medical, Dental & Vision Insurance 401(k) with Company Match 2 Weeks Paid Vacation Supportive Leadership Team with Strong Shop Floor Presence High Level of Autonomy and Independent Decision-Making Work on Unique, Custom-Built Equipment and Projects Company-Sponsored Holiday & Employee Appreciation Events Stable Manufacturing Environment with Long-Term Career Growth Daily Responsibilities • Troubleshoot and repair electrical, mechanical, hydraulic, and pneumatic systems, • Diagnose and resolve PLC-related equipment issues, • Maintain and repair 480V electrical systems, motor controls, and AC/DC components, • Service pumps, hydraulic systems, furnaces, presses, and other manufacturing equipment, • Perform preventative and predictive maintenance activities, • Inspect equipment and identify issues before they impact production, • Read and interpret electrical schematics and technical drawings, • Conduct root cause analysis to solve recurring equipment problems, • Prioritize maintenance tasks to support production schedules, • Work independently while collaborating with production and maintenance teamsWhat We're Looking For, • 3+ years of industrial maintenance experience, • Strong PLC troubleshooting experience, • Experience working with 480V electrical systems, • Electrical and mechanical troubleshooting skills, • Experience with pumps, hydraulics, pneumatics, and motor controls, • Preventative and predictive maintenance knowledge, • Ability to read electrical schematics and technical drawings, • Strong problem-solving abilitiesPreferred Qualifications, • Experience maintaining large industrial presses and furnaces, • Root cause analysis experience, • Ability to manage multiple priorities in a production environment, • Self-motivated and able to work with minimal supervision, • Welding or fabrication experience is a plusWork Environment, • Industrial manufacturing facility in Buffalo, NY, • Produces advanced technical ceramics and specialty materials, • Supports the defense, aerospace, and energy industries, • Fast-paced production environment, • Non-climate-controlled facility, • Work around large presses, furnaces, automated equipment, and industrial electrical systems, • Strong focus on equipment reliability and production uptime Apply today! Job Type & Location This is a Contract to Hire position based out of Buffalo, NY. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Job Type & Location This is a Contract to Hire position based out of Buffalo, NY. Application Deadline This position is anticipated to close on Nov 4, 2026. Workplace Type This is a fully onsite position in Buffalo,NY. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Maintenance Mechanic Department: Maintenance Reports To: Operations Manager Job Status: Full-Time FLSA Classification: Non-Exempt Hours: Monday – Friday, 7 a.m. – 3 p.m. Location: Cheektowaga, NY (onsite) Tectran Manufacturing Inc. is an industry-leading manufacturer and marketer of air, hydraulic, and electrical systems for the transportation industry. The primary market focus includes the heavy-duty tractor-trailer and bus industries. Our commitment to quality and durability assures us a leading edge in product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to customer needs. Job Summary This position is responsible for the high-standard performance of the company’s production equipment, as well as the upkeep, troubleshooting, and repair of mechanical systems throughout the company’s main facility. This role offers the opportunity to apply your knowledge by working with the engineering and quality teams on equipment design, testing, and modifications. The successful candidate must be proactive and flexible, able to respond competently to urgent situations, and handle stressful conditions calmly and decisively. Responsibilities: • Perform preventative, predictive, and corrective maintenance on production machinery and facility equipment., • Troubleshoot and repair mechanical equipment, including motors, gearboxes, bearings, hydraulic and pneumatic systems., • Perform MIG, TIG, and/or stick welding as required., • Design, build, modify, and repair jigs, fixtures, tooling, work holding devices, machine guards, brackets, frames, platforms, and other manufacturing aids., • Work closely with production and engineering personnel to identify opportunities to improve equipment reliability, productivity, ergonomics, safety, and product quality., • Develop practical solutions to manufacturing problems through mechanical design, fabrication, and equipment modification., • Take measurements and create sketches or basic drawings for custom parts, fixtures, and equipment modifications., • Build and test jigs and fixtures to ensure proper fit, function, repeatability, and operator usability., • Modify existing tooling and fixtures to improve production efficiency, quality, and ease of use., • Fabricate components from steel, stainless steel, aluminum, and other materials as required., • Diagnose equipment failures and determine the appropriate repair or replacement of components., • Perform equipment alignments, adjustments, lubrication, and component replacement., • Use hand tools, power tools, welding equipment, cutting equipment, drill presses, grinders, and other shop machinery safely and effectively., • Assist with installation, relocation, and modification of machinery and production equipment., • Respond promptly to equipment breakdowns and minimize production downtime., • Maintain accurate maintenance records and document completed repairs, projects, and preventative maintenance activities., • Inspect equipment and tools for potential safety, mechanical, or operational issues and recommend corrective actions., • Maintain a clean, organized, and safe maintenance and fabrication work area., • Follow all company safety procedures, OSHA requirements, lockout/tagout procedures, and applicable welding and hot-work practices., • Work cooperatively with production, engineering, quality, and other maintenance personnel., • Perform other maintenance, fabrication, and improvement projects as assigned. Education & Experience: • High school diploma or equivalent (preferred), • Skills training at vocational college, • Minimum 2 years of job-related experience, • Experience working in the manufacturing industry, • Demonstrated welding and metal fabrication experience. Required Skills & Abilities: • Proficient in welding, electrical, machining, fabrication, and facilities, • ·Strong mechanical troubleshooting and repair skills., • Ability to design and build jigs, fixtures, tooling, and other custom devices used in a manufacturing environment., • Ability to visualize mechanical solutions and translate concepts into functional fabricated components., • Basic knowledge of hydraulic and pneumatic systems., • Ability to safely operate common maintenance and fabrication tools and equipment., • Ability to work independently, prioritize tasks, and respond effectively to equipment breakdowns and manufacturing needs., • Expert knowledge of standard equipment and facility safety regulations, • Ability to read and interpret mechanical drawings, equipment manuals and schematics, • Preferred CAD i.e. SolidWorks knowledge, • Ability to troubleshoot equipment issues, • Ability to effectively communicate with facility managers and visiting contractors, • Strong attention to detail and commitment to workplace safety. Safety Responsibilities: • Wear the appropriate PPE in the required areas of the building and according to the scope of work being performed, • Follow site safety and any department specific protocols, • Report safety hazards or potential safety hazards to reporting Supervisor, • Attend company safety meetings Physical Requirements: • Must be able to stand for long periods of time, • Ability to walk the entire facility without difficulty, • Must be able to occasionally carry or lift up to 50 pounds, • Possesses strong coordination and dexterity, • Ability to work around machinery, noise, heat, dust, and other industrial conditions., • Ability to work overtime, weekends, or respond to emergency maintenance needs when required. Perks: • Health, Dental, Vision, Life and AD&D, and Voluntary Insurance Coverages, • 401(k) program with company match, • Wellness Program, • ASTM-Approved Safety Shoe Balance Program, • $500 referral bonus TECTRAN is an equal opportunity employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors. \nCompany Description Our Story Over a period of 50+ years, Tectran has become a manufacturer and marketer of air, hydraulic and electrical components and systems for the transportation equipment industry. Our primary market focus includes the heavy truck, trailer and bus industries though our continuous product line expansion has begun to draw us into other mobile equipment markets. Our primary mission is to supply products that offer maintenance, operating, security and safety solutions to equipment operators and to make these readily available on new equipment and for service needs through an extensive network of professional parts marketers across the continent. Our active participation in the industry’s major technical specification groups and our commitment to quality and durability assure leading edge product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to the needs of the end user. While we’re best known for our innovative tractor-trailer hook-up lines, Tectran offers a wide range of products enabling “one-stop” purchasing. In addition to our own unique items, we provide extensive interchanges to popular market brands and are constantly broadening our product offering and working with supplier partners to provide added convenience to our customers. Our Story\n\nOver a period of 50+ years, Tectran has become a manufacturer and marketer of air, hydraulic and electrical components and systems for the transportation equipment industry. Our primary market focus includes the heavy truck, trailer and bus industries though our continuous product line expansion has begun to draw us into other mobile equipment markets.\n\nOur primary mission is to supply products that offer maintenance, operating, security and safety solutions to equipment operators and to make these readily available on new equipment and for service needs through an extensive network of professional parts marketers across the continent.\n\nOur active participation in the industry’s major technical specification groups and our commitment to quality and durability assure leading edge product designs and superior performance for demanding market applications. We hold several patents and make it a practice to listen closely to the needs of the end user.\n\nWhile we’re best known for our innovative tractor-trailer hook-up lines, Tectran offers a wide range of products enabling “one-stop” purchasing. In addition to our own unique items, we provide extensive interchanges to popular market brands and are constantly broadening our product offering and working with supplier partners to provide added convenience to our customers.

Job Description SHIFTS: ROTATING CONTINENTAL Bericap is a privately held family-owned company founded in 1926, and is one of the leading manufacturers of plastic closures for food, beverage and industrial markets. As a result of continued growth Bericap has a full-time, hourly opening for a Production Team lead - Process Technician reporting to the Plant Manager. Position Purpose Ensure manufacturing operations run smoothly by keeping a close eye on machine performance, performing regular maintenance, troubleshooting technical problems, and actively working on process improvements. This role ensures production targets, quality standards and safety protocols are met while promoting a positive team environment and a continuous improvement culture. This position is a primary point of contact between front-line production staff and management, ensuring effective communication, workflow, and resource management throughout the shift. Responsibilities Injection Process Operation • Monitor daily process parameters on the injection machines, • Optimize cycle time while ensuring conforming product, • Establish optimum baseline process and calculated alarm parameters, • Responsible for advanced process analyses, • Lead or participate in mold and product design/drawing reviews when required, • Liaise with outside suppliers and machine manufacturers to develop process improvements, • Participate in tooling buy offs, • Operate injection molding machines, vision systems, down-stream equipment, and material feed equipment, • Assist with the start-up of new equipment by developing process parameters and implementing operator training plans, • Monitor critical process parameters on the injection machines, vision systems, color feeders, color blenders and secondary systems to include scheduled process and equipment audits, • Lead role in advanced process analysis: identifying process improvements that result in cost savings, improved part quality, and improvement of related KPI’s, • Conduct process related training for operators, • Participating in sample requests issued, and process related activities focused on identifying root causes Production • Monitor shift output to ensure schedule and delivery target attainment, • Issue repair and other required work orders, ensuring timely follow-up, • Partner with planning and maintenance to ensure that scheduled or emergency maintenance on equipment is achieved as quickly as possible, • Respond to incidents and implement preventative measures, • Enforce 5S standards across the plant floor to ensure a clean, organized, and efficient work environment, • Ensure that any Joint Health and Safety Committee (JHSC) members are afforded adequate time to meet their committee responsibilities, • Monitor shift quality to ensure closures meet Bericap standards and respond to identified quality issues on a timely basis Personnel Supervision • Handle all employee data with the upmost confidentiality and discretion, • Manage time off requests and flag any staffing gaps with HR and Production Team Leader, • Ensure employees, temporary personnel and visitors on the plant floor are compliant with GMP and safety policies and procedures, • Plan, document and carry out sufficient cross training to provide adequate backup of all job functions in partnership with the Production Team Leader and HR, • Ensure all employees sign in and out using On-Location System (WOL), • Facilitate onboarding for new hires and temporary personnel, ensuring proper documentation, • Track employee attendance and ensure any such issues are identified in accordance with the policies outlined in the Employee Handbook, • Ensure all Bericap policies and procedures are followed, • Arrange shift coverage for Production personnel when necessary, • Review and approve time-off requests and payroll timesheets with accuracy and within prescribed deadlines, • Motivate production personnel to work as a team, both within production as well as other departments, • Work with employees to further develop their skills and identify future areas of career interest, • Participate in the management of employee performance through regular feedback, coaching and annual performance reviews, • Partner with HR and the Plant Manager with respect to potential disciplinary actions, • Document and deliver any disciplinary actions, • Conduct a shift huddle prior to shift start emphasize on safety concerns, production targets, any major changes, coordinate workflow and assign tasks to team members Other • Conduct evacuation drills as required, • Attend communication and production meetings, • Champion and participate in the See It, Sort It, Report It program, • Ensure all quality, food safety, safety, environmental as well as all other Company policies and procedures are followed, • Ensure that all quality, food safety, safety, and environmental issues are reported to the appropriate manager or supervisor, • Ensure all work is conducted safely and without injury. Skills & Abilities • Effective written and verbal communication skills, • Effective organizational skills with attention to detail, • Advanced injection molding knowledge related to troubleshooting and resin behavior, • Advanced problem-solving skills focused on root cause analysis and lessons learned, • Working knowledge of basic hydraulic/electric/pneumatic/vision systems, • Effective time management skills, • Blueprint reading, • Proficiency in Microsoft Excel and Word, • Ability to thrive in a dynamic collaborative team environment, • Adaptability, • Proven leadership and team management skills, • Excellent communication skills Education • Degree or technical certification preferred, • Related production/leadership courses and seminars an asset Experience • 5-7 years’ experience with injection mold machines Reporting Structure • Position reports to the Plant Manager Benefits Medical, dental and vision insurance FSA and Dependent Care Accounts Company paid short term, long term and life insurance 401(k) plans with company matching contributions Paid Time Off Tuition Reimbursement Employee Recognition Program Employee Fitness Reimbursement About Bericap Bericap is a privately held family-owned company founded in 1926, and is one of the leading manufacturers of plastic closures for food, beverage and industrial markets. Bericap’s plastic closures incorporate tamper evidency, sealing features, pouring features, and are backed by our R & D centers in the U.S. and Europe. Bericap produces more than 91 billion closures annually with 26 plants operating in 21 countries and employs more than 4,000 people. The quality of people is the one element that distinguishes one company from others; Bericap recognizes that it is the total sum of its employees' talent and professionalism that is responsible for its success. For this reason, the Company makes every effort to attract the finest professionals, nurture their growth, and place their capabilities at the service of its customers. Bericap NY, LLC is an Equal Opportunity Employer and administers all personnel practices without regard to race, color, religion, sex, age, national origin, disability, sexual orientation, gender identity or expression, marital status, veteran status, genetics or any other category protected under applicable law. You should be proficient in: • Continuous Improvement, • Food and Beverage Manufacturing, • Food Safety and Quality Assurance (FSQA), • Programming Machine Vision Systems, • ISO 9001 Certification Experience, • Root Cause Analysis, • Blueprint Reading, • Microsoft Excel

Job DescriptionDescription: JOB SUMMARY Driving responsibilities involve delivery/pick up, reporting, operations, service, safety and maintenance, and other duties as assigned by management. The truck driver will maintain a positive attitude that promotes teamwork within the company and a favorable image of the company. When performing warehouse duties under the Supervision of the Warehouse Manager, will perform material receiving; order processing; use of company ERP System; product packaging for shipment to ensure error-free packaging; efficient loading and unloading of trucks. Verify and keep records on incoming and outgoing inventory. This position is classified as a Safety Sensitive Position due to the work environment and equipment utilized by staff. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES Driver • Deliver/Pick-up, • Assist in loading cargo as necessary., • Conduct Pre-trip inspection and complete paperwork., • Inspect freight, paperwork, and vehicle for compliance with regulations., • Check fuel and oil level before leaving., • Ensure cargo is well secured and not damaged., • Deliver the cargo in the most efficient and safest manner possible., • Ensure accuracy of the invoice and order before unloading., • Unload and/or assist in unloading cargo at the respective customer locations., • Assist in loading cargo as necessary from customers., • Collect COD payments as required., • Reporting, • Report any discrepancies in vehicle, cargo, or paperwork to your supervisor prior to leaving., • Complete all DOT regulated paperwork as required., • Report any customer complaints or refusals to your supervisor., • Return all required documentation to the company daily to include but not limited to: signed delivery receipts, pick up slips, driver’s logs, pre-trip inspection sheets., • Service, • Greet customers promptly and courteously., • Assist customers with unloading and loading cargo as necessary., • Actively work to increase personal skills and product knowledge., • Maintain a neat appearance., • Safety and Maintenance, • Operate the vehicle safely., • Obey all traffic laws, including proper use of Electronic Log Device [ELD], • Follow FMCSA Clearinghouse Regulations, • Allow no riders except those approved by your supervisor. Warehouse • Unload incoming trucks and move products to proper staging areas using a forklift, pallet jack or crane., • Receive incoming materials and compare information on packing slip with purchase orders, invoices, or other documents to verify accuracy of shipment., • Prepare orders for shipment by retrieving inventory and packaging appropriately for damage free delivery., • Maintain a neat and clean work area by sweeping floors, disposing of cardboard, banding, or packing materials, and removing debris., • Perform related duties as requested to meet department and/or business objectives., • After training, use equipment to accurately measure materials, color code, catalog, log inventory, and put product away., • With training, may operate industrial cutting equipment to cut materials as requested and perform miscellaneous duties as assigned, • After training, when required, may operate a non-CDL F450 truck for delivery, to meet production needs., • Regular and reliable on-site attendance is a requirement of employment. Requirements: QUALIFICATION STANDARDS • Valid NYS Drivers' License in good standing with Non-CDL Medical Card, • Obtain and maintain a valid Non -DOT Medical Certification., • Valid Real ID or eligible identification proof may be mandatory based on customer requirements for specific delivery territories., • Registration on FMCSA Clearinghouse and knowledge of State/Federal transport regulations., • High School Diploma or High School Equivalent strongly preferred., • Competent driving skills with one year of driving experience preferred., • Knowledge of vehicles and all their parts., • Mathematical ability to sort, check, count, measure, and verify numbers and or product shipped or received., • Demonstrated computer skills in the use of the company ERP System as required., • Ability to operate material handling equipment after training., • Ability to read and write English., • Good communication skills., • Ability to prepare routine administrative paperwork and perform math calculations. SUPERVISORY RESPONSIBILITIES • This position does not have any supervisory responsibilities. ACCOUNTABILITIES • Contribute to the overall success of the company by performing all assigned duties in a professional, timely and accurate manner., • Follow all Company safety policies and procedures set forth in the Employee Handbook, Safety Policies, and any local/regional/state/national regulations. EQUIPMENT, MACHINES AND SOFTWARE USED: • Ability to operate industrial fork trucks/lifts, overhead crane, back saw, and computer to send/receive email messages, post information to a database, and perform basic email and/or data entry in ERP System., • Accurately read calipers and measuring instruments determine inventory amounts and customer requirements. With training ability to machinery (saw and/or lathe)., • You must wear appropriate personal protective equipment including safety shoes, gloves, and safety glasses when performing certain job duties. MENTAL AND VISUAL REQUIREMENTS • Moderate mental and visual attention required for performing manual work, machine operations, setups, inspections, and adjustments that require frequent decisions to detect and adjust for variance from proper operation., • May be required to operate equipment in congested areas involving considerable variety of movement. PHYSICAL ACTIVITIES AND REQUIREMENTS • Ability with or without reasonable accommodation performs the physical requirements of the job which include but are not limited to walking, climb, stoop, kneel, crouch, bend, talk, hear, and perform repetitive motion of hands and/or wrists to finger, grasp, handle, feel, push, pull, reach., • Visual acuity to perform inspection of materials, reading of caliper and other measuring devices and operating motorized material handling equipment., • Ability to exert more than 20 pounds of force constantly, and/or more than 50 pounds of force frequently, and/or 100 pounds of force occasionally to move objects. ENVIRONMENTAL CONDITIONS • Work involves minimal exposure to unusual elements, such as temperature changes, outdoor exposure to weather conditions, fumes, odors, gases, mists, and/or smoke, oils and/or lubricating fluids. (SDS sheets on file and available for review)., • Work environment involves exposure to physical risks, such as operating dangerous equipment and proximity to moving mechanical parts. COMPENSATION • The hourly range is $19.00/hour wage up to $27.50/hour, plus discretionary incentive. EMPLOYER'S DISCLAIMER • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Furthermore, the company reserves the right to add to or revise an employee's job duties at any time at its sole discretion., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship.

Job DescriptionDescription: Carrier Process Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment solutions. Please visit us at https://www.cpeg.com/ to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are seeking a full-time Warehouse Clerk at our Tonawanda, NY location. The Warehouse Clerk is responsible for receiving, shipping, storing and distributing material, equipment and products within the facility, ensuring accuracy and timeliness of all job functions. Responsibilities • Assist shipping and receiving unloading trucks, checking in merchandise, matching purchase orders, • Read work orders, shipping orders or requisitions to determine items to be moved, gathered or distributed and/or shipped., • Move materials and items from receiving or storage areas to shipping or other designated areas., • Sort and place materials or items on racks, shelves or in bins according to predetermined sequence such as size, type, style, color or product code., • File requisitions, work orders or requests for materials, tools or other stock items., • Assemble customer orders from stock and place orders on pallets or shelves, or relocate orders to a holding area or fabrication department., • Mark materials with identifying information using appropriate method., • Open bales, crates and other containers., • Record amounts of materials or items received or distributed via appropriate ERP system., • Assist in counting of physical inventory., • Weigh and count items for distribution within plant to ensure conformance to company standards., • May be assigned facilities maintenance duties as needed, • Prepare parcels for mailing., • Performs related duties as assigned by supervision, • Safety and housekeepingRequirements:, • High School Diploma, or equivalent, • One year prior warehouse clerk experience, • SYTELINE ERP Experience is a plus, • Develop professional and process expertise to provide improved assistance to internal and external customers;, • Knowledge of the workplace safety system;, • Able to work under little supervision;, • Understands and able to utilize mathematical formulas required to perform job., • Able to use a level and tape measures;, • Knowledge of general manufacturing safety rules; proper use and handling of job related safety equipment;, • Able to safely operate forklift and overhead crane;, • Able to understand and carry out detailed written or oral instructions;, • Demonstrates team building, problem solving, communication, time management skills;, • Excellent communication skills both written and verbal; Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them., • Cash Balance Pension Plan. We contribute to this retirement savings on your behalf—no employee contribution required. Combined with a guaranteed 4% rate of return, this means you receive a consistent and valuable retirement benefit every year. CPEG Buffalo LLC is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to actual or perceived: race (including traits historically associated with race, such as hair texture and protective hairstyles), color, creed, religion (including wearing attire, clothing or facial hair in accordance with the tenets of religion), sex (including pregnancy, childbirth or related medical conditions and transgender status), gender identity or expression, reproductive health decisions, familial status, national origin, physical or mental disability (including gender dysphoria and being a certified medical marijuana patient), genetic information (including predisposing genetic characteristics), age (18 and over), veteran status, military status, sexual orientation, marital status, certain arrest or conviction records, domestic violence victim status and any other status protected by law. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job Description CSI Sands (N.E.) provides a full range of aggregate and resource materials production services. We are equipped to handle every phase of the materials engineering process, from initial exploration to delivery of the end-product. We are currently searching for a Materials Dispatch Coordinator (Night Shift) to complement our team at our site in Buffalo, NY. This position will report to the Operations Manager. Responsibilities: • Take sand samples at various locations in the plant facility., • Complete sieve analysis of all plant operational sand samples., • Ensure sample containers are properly labeled and ready for sampling of all boat loads., • Complete analysis of all boat load shipments., • Complete all calibration testing on required lab equipment., • Report to Facility Manager and Shift Supervisors all Quality Control Issues., • Serve as the first point of contact for operational issues involving drivers and railyard personnel, escalating matters to management as required., • Coordinate work schedules for drivers and rail crews, communicate assignments, and obtain required signoffs., • Review and verify transportation documentation, including daily logs, inspection reports, delivery receipts, and shipping paperwork., • Monitor job progress, operational performance, and transportation costs, providing regular reports to Management., • Assist in resolving product, material, and equipment issues that impact fulfillment or delivery., • Identify operational challenges and recommend process improvements to increase productivity, safety, and service quality., • Perform other duties as assigned. Additional Responsibilities: • Provide on-the-job training to new employees for working in the lab., • Complete testing on various samples from new raw material sources as needed., • Complete other tasks as assigned to maintain plant safety and maintenance control. Skills: • Ability to read and interpret schematics of the plant process., • Communicating effectively with co-workers, subordinates, and superiors., • Basic reading, writing, and arithmetic skill required. This is normally acquired through a high school diploma or equivalent., • Ability to complete Quality Control sampling required in all plant areas., • Basic mechanic skills needed to open and close all sampling points., • Manual dexterity required for operating lab equipment and computers. License Requirements • The position requires the possession and maintenance of a valid New York driver’s license and a satisfactory driving record. Physical Requirements and Working Conditions: • Must possess mobility to work in an operating industrial minerals plant / plant trailer., • Must be able to use standard office equipment including a computer and calculator., • Must be able to read materials in print and on a computer screen., • Must be able to communicate in person, over the telephone and radio., • Must be able to lift 50 pounds. Education and Experience: • High School diploma or GED We encourage all who are qualified and interested to apply in confidence; however, only those in consideration will be contacted.

Job DescriptionJob Title: Warehouse Associate Location: Tonawanda, NY Hire Type: Direct Hire Pay Range: $18.00 - $19.00/hour Work Type: Full-time Work Model: Onsite Work Schedule: Monday – Friday, 8:30am – 5pm Recruiter Contact: Blanca Vega, bvega@imaginestaffing.net Nature & Scope:Positional Overview The Imagine Group is recruiting for a Warehouse Associate on behalf of our client, a leading manufacturer and distributor of engineered fastening solutions. This company serves a wide range of industries including automotive, aerospace, and industrial manufacturing. In this role, you will be responsible for receiving, storing and organizing inventory. In addition, you will assist with picking and packing orders for shipment, performing regular inventory counts and ensuring all products are handled and shipped according to company quality and safety guidelines. As part of our team, you will enjoy a comprehensive benefits package, including: • Medical & Employer Paid: Dental & Vision starting May 1, 2025, • Paid Parental Leave, • 401K and Employer Match, • Paid time off and holidays, • Tuition Reimbursement, • Paid on-the-job Training, • Performance Incentive Bonuses, • Community Volunteering, • Employee Centric Culture Role & Responsibility:Tasks That Will Lead To Your Success, • Receive products and other goods. Use ERP system, JD Edwards, as required for receiving direct finished goods., • Pick orders using our ERP system, JD Edwards, utilizing a Microsoft tablet, • Verify quantity of products received by reading shipping information and box quantities., • Identify and stock products accurately and timely into warehouse bin locations utilizing scanning equipment., • Re-package products as needed by counting items and ensuring the accurate quantity is in each box., • Maintain and process order using tool assembly, bagging machine, rework, and quality sorting., • Prepare and ship product per customer requirements and shipping orders (including bar codes), or secondary process requirements., • Maintain equipment checklists and minimal equipment upkeep. Including scales, forklifts, etc., • Complete required daily and monthly maintenance checklist. Report issues to manager(s)., • Maintain clean warehouse area- following policies and procedures for housekeeping and safety., • Verify returned material authorization (RMA) quantities, part numbers, customer names etc. and close RMA in Syspro., • Become and maintain Penn Engineering approved Forklift certification within 3 months of employment., • Other duties as assigned Skills & ExperienceQualifications That Will Help You Thrive, • High school diploma or equivalent, • 1+ Years of warehouse experience preferred, • Ability to read and communicate both verbally and written in English, • Skill in adding, subtracting, multiplying and dividing numbers, • Ability to use a computer for data entry, data retrieval and updating orders appropriately, • Ability to utilize barcode scanning technology, • Experience with JD Edwards ERP System or another ERP System preferred, • Frequent lifting and carrying of items, often ranging from 10 to 50 pounds (sometimes heavier)., • Frequent lifting as a team for items over 50 pounds, • Standing and walking for extended periods, often 8–12 hours per shift., • Bending, stooping, and crouching to pick up or move items., • Reaching overhead and at various angles to access shelves or storage areas., • Pushing and pulling carts, pallet jacks, or other equipment., • Climbing ladders or stairs to reach high storage areas., • Operating machinery such as forklifts, pallet jacks, or conveyor belts (may require certification)., • Repetitive motions such as scanning, packing, or sorting items., • Working in varying temperatures, including cold storage or hot environments., • Manual dexterity for handling small items, labeling, or packaging.

Job DescriptionDescription: ABOUT US Since 1935, Ferguson Electric has been providing the Western New York region with exceptional electric repair and construction services. We have the experience and skill to be our customer’s “connection to quality”. Our professional team has handled a majority of the construction and service contracts for the commercial and industrial facilities in the area. We have the skill, experience, and the dedication to properly address all electrical repair and construction needs. ABOUT THE ROLE Ferguson Electric’s Material Specialist reports to the Warehouse/Shop Manager and performs duties associated with warehouse operations, including receiving, storing, and distributing products and materials, as well as driving to deliver materials to job sites. The ideal candidate will possess excellent organizational skills, a strong work ethic, and the ability to thrive in a fast-paced environment. all while strongly upholding and promoting the organization's core values. WHAT YOU WILL DO • Warehouse Operations:, • Receive and inspect incoming shipments, ensuring accuracy and quality., • Maintain accurate inventory records and perform regular counts., • Pick, pack, and prepare orders for shipment, meeting customer deadlines., • Safely operate warehouse equipment and follow proper handling procedures., • Driving and Delivery:, • Drive company vehicles to deliver supplies to project sites., • Load and unload products, ensuring proper handling and security., • Verify the accuracy of outbound shipments against order documentation., • Adhere to traffic laws, safe driving practices, and delivery schedules., • Warehouse Maintenance and Safety:, • Keep the warehouse clean, organized, and optimized for space utilization., • Adhere to safety protocols, including handling hazardous materials., • Identify and report safety hazards or equipment malfunctions., • Collaboration and Communication:, • Collaborate with team members to streamline warehouse operations., • Communicate effectively with colleagues, supervisors, and project managers., • Provide support to other departments and participate in team meetings. ABOUT YOUR QUALIFICATIONS • High school diploma or equivalent., • Proven experience in a warehousing or logistics role is preferred., • Proficiency in operating forklifts and other warehouse equipment., • Strong attention to detail and accuracy., • Ability to perform physical tasks such as lifting, carrying, and moving heavy items., • Excellent organizational and time management skills., • Good communication and interpersonal abilities., • Adherence to safety protocols and procedures. Ferguson Electric recognizes the value of diversity in our workforce. We are committed to equal opportunity. We consider all qualified employment applicants without regard to race, religion, color, gender, age, national origin, sexual orientation, gender identity, partnership status, protected veteran status, disability, or any other status protected by federal, state, or local law. Individuals who hold legal work authorization applicable to employment at Ferguson Electric in the United States will be considered without regard to citizenship/alienage. Requirements: ABOUT YOUR QUALIFICATIONS • High school diploma or equivalent., • Proven experience in a warehousing or logistics role is preferred., • Proficiency in operating forklifts and other warehouse equipment., • Strong attention to detail and accuracy., • Ability to perform physical tasks such as lifting, carrying, and moving heavy items., • Excellent organizational and time management skills., • Good communication and interpersonal abilities., • Adherence to safety protocols and procedures.

Are you looking to start your career as an Estimator? This company is willing to train! This Jobot Job is hosted by: Melissa Todd Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $55,000 - $70,000 per year A bit about us: We are a national leader in commercial and industrial painting, coatings, and joint sealant services, known for delivering large-scale projects with precision, reliability, and safety at the forefront. From new construction to maintenance and restoration, our team partners with top general contractors, developers, and building owners across the country to bring their visions to life—on time and on budget. Our success is built on a foundation of craftsmanship, accountability, and long-term relationships. With a focus on innovation, rigorous quality control, and a commitment to exceeding expectations, we take pride in being a trusted partner for some of the most recognized names in industrial, retail, and distribution construction. Why join us? • Upward mobility, • Positive company culture, • Great training, • Competitive benefits Job Details Job Details: As an Estimator, you will play a crucial role in our dynamic, growth-oriented construction company. This entry-level position is an exciting opportunity for an individual with a keen eye for detail and a passion for numbers. Your primary role will be to accurately forecast the cost, time, materials, and labor required for construction projects. You will work closely with project managers, architects, and engineers to ensure the most cost-effective solutions without compromising quality. Responsibilities: Your day-to-day responsibilities will include: 1. Analyzing blueprints, specifications, proposals, and other construction documents to prepare time, cost, materials, and labor estimates., 2. Consulting with clients, vendors, personnel in other departments, or construction foremen to discuss and formulate estimates and resolve issues., 3. Conducting special studies to develop and establish standard hour and related cost data or effect cost reductions., 4. Preparing estimates for use in selecting vendors or subcontractors., 5. Reviewing material and labor requirements to decide whether it is more cost-effective to produce or purchase components., 6. Preparing cost and expenditure statements and other necessary documentation at regular intervals for the duration of the project., 7. Working with the project management team to develop a construction schedule and budget. Qualifications: The ideal candidate for the Permanent Estimator position should possess the following qualifications: 1. A Bachelor's degree in Construction Management, Engineering, or related field., 2. A minimum of 2 years of experience with construction documents., 3. Strong understanding of construction processes, materials, and a keen eye for detail., 4. Proficiency in Microsoft Office Suite (particularly Excel) and estimating software., 5. Excellent analytical skills with the ability to interpret construction blueprints and technical documents., 6. Strong communication and interpersonal skills to effectively collaborate with team members and negotiate with vendors and subcontractors., 7. Ability to work under pressure, prioritize tasks, and meet deadlines. This is an exciting opportunity to develop your career in a supportive, fast-paced environment with plenty of opportunities for growth and development. If you are a detail-oriented professional with a passion for construction and a knack for numbers, we would love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description GTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safety I Quality I Customer Obsession I Speed I Agility Overview The Electrical Lead at GTI Fabrication’s Buffalo manufacturing site is responsible for leading and overseeing all electrical work within an industrial production environment. This role supports both new construction and ongoing maintenance of manufacturing equipment, energy systems, and facility infrastructure. The Electrical Lead will supervise a team of electricians and electrical technicians, coordinate closely with maintenance leadership, engineering, and production teams, and ensure all electrical work is completed safely, efficiently, and in compliance with applicable codes and standards. This position plays a key role in minimizing downtime, improving reliability, and supporting continuous manufacturing operations. Minimum Qualifications High school diploma or GED required Completion of a recognized electrical apprenticeship program Valid electrician license or certification per New York State requirements Minimum 5 years of hands-on electrical experience in installation, maintenance, and troubleshooting Previous experience leading or supervising electricians in an industrial or manufacturing environment Strong working knowledge of NEC and OSHA safety standards Preferred Qualification Associate’s or Bachelor’s degree in Electrical Engineering or a related field Experience with industrial manufacturing equipment, motor controls, and power distribution Working knowledge of PLCs, automation systems, and industrial controls Familiarity with preventive maintenance programs Experience with electrical schematics, digital documentation, and CMMS systems Project management experience or certification (PMP a plus) Key Responsibilities Lead, mentor, and supervise a team of electricians and electrical technicians within the manufacturing facility Plan, schedule, and assign electrical work to support production, maintenance, and capital projects Ensure all electrical installations, repairs, and modifications comply with NEC, OSHA, and company safety policies Troubleshoot complex electrical issues related to manufacturing equipment, controls, and facility systems Perform and oversee inspections, testing, and commissioning of electrical systems Collaborate with maintenance, engineering, and production teams to minimize downtime and support operational goals Train team members on safe work practices, procedures, and technical skills Maintain accurate documentation including work orders, inspections, safety records, and compliance reports Manage electrical materials, tools, and inventory to ensure availability and cost control Skills & Competency Strong technical expertise in industrial electrical systems and controls Proven leadership and team management skills Excellent communication skills for coordinating with cross-functional teams Strong problem-solving and troubleshooting abilities Thorough understanding of electrical codes and safety regulations Ability to prioritize work in a fast-paced manufacturing environment Strong organizational skills to manage schedules, resources, and documentation Shift 2nd: Monday - Friday 3:30pm - 12am #ZR Perks & Benefits GTI offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy Policy Terms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. \nCompany Description GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description Location: Buffalo, NY Salary: $100,000-$125,000 Benefits: Medical, dental, vision, 401k, PTO The Controls Engineer will design, maintain, and improve industrial automation systems supporting manufacturing operations. This role requires strong PLC programming, troubleshooting, and system-level problem-solving skills. Key Responsibilities • Design, program, and maintain PLC-based control systems and HMI applications., • Troubleshoot electrical, controls, and automation issues in a production environment., • Support equipment commissioning, startups, upgrades, and continuous improvement projects., • Interpret electrical schematics, wiring diagrams, control drawings, and P&IDs., • Partner with Engineering, Maintenance, and Production to resolve equipment and process issues., • Document PLC logic, I/O changes, software revisions, and system modifications., • Ensure controls systems comply with applicable safety standards and engineering practices., • Evaluate emerging technologies, including robotics, motion control, and vision systems. Qualifications • Bachelor’s degree in Electrical Engineering or a related discipline preferred., • Industrial automation and controls experience within a manufacturing environment., • Proficiency in PLC programming, troubleshooting, and HMI development., • Ability to read and interpret electrical schematics and control drawings., • Experience with multiple PLC platforms, robotics, motion control, or vision systems is a plus., • Strong analytical, communication, documentation, and problem-solving skills., • Detail-oriented, adaptable, and comfortable supporting high-uptime production operations.

Job Description GTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safety I Quality I Customer Obsession I Speed I Agility As a Mechanical/Electrical Assembler, you will support the assembly, installation, and integration of mechanical, electrical, and HVAC components into energy storage enclosures and modular industrial structures. This role is ideal for individuals with experience in mechanical assembly, electrical assembly, HVAC installation, construction labor, or general industrial assembly. Key Responsibilities Component & System Assembly The Mechanical Assembler will assemble, install, and integrate mechanical, electrical, and structural components into energy storage enclosures and modular units. Follow assembly drawings, blueprints, schematics, and written work instructions. Mechanical Assembly (Main Focus) Perform hands-on tasks: cutting, drilling, mounting, bolting, fastening, and structural integration. Install mechanical components, hardware, ducting, frames, and industrial parts. Electrical Assembly & Wiring (Secondary Focus) A Mechanical Assembler will assist with running conduit, pulling wire, cable routing, and installing electrical components. Use multimeters, meters, and diagnostic tools to test and troubleshoot circuits. Perform basic electrical installation, maintenance, and repairs (as qualified). HVAC Installation (Secondary Focus) Install HVAC units, ducting, vents, and climate control systems for modular enclosures. Blueprint Interpretation Read and follow simple blueprints, diagrams, and assembly drawings to ensure accurate integration. Power Tools & Equipment Operate drills, saws, grinders, impacts, and other power tools safely. Support material handling, staging, and workspace organization. Required Qualifications Experience as a Mechanical Assembler, Electrical Assembler, construction laborer, HVAC installer, or industrial assembler. Proficiency with power tools, tape measures, hand tools, and diagnostic equipment. Ability to read and interpret basic blueprints and diagrams. Experience with electrical tasks (conduit, wiring, testing) or HVAC installation (preferred). Ability to lift 50 lbs+, stand for long periods, and work in an industrial manufacturing environment. Strong attention to detail, quality, and safety. Experienced in blueprint interpretation. Preferred Experience Modular construction, containerized structures, or energy storage system assembly. Mechanical, electrical, HVAC, or fabrication background. • OSHA, safety training, or industrial construction experience. #ZR Perks & Benefits GTI offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy Policy Terms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us. \nCompany Description GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more.

Job Description Job Summary: The Controls Technician ensures the reliability and efficiency of production processes by installing, maintaining, troubleshooting, and repairing electrical and automation systems. This role also involves minor design, programming, and maintenance of PLC systems, including Allen Bradley. The position includes diagnosing equipment issues, making necessary repairs, and upholding high technical standards, safety, and quality. Must have holiday and weekend availability. Must also be available to work all shifts (1st,2nd,3rd). Key Responsibilities: • Perform routine inspections, preventive maintenance, and repairs on electrical and control systems to minimize downtime and ensure optimal performance., • Develop, modify, and troubleshoot Programmable Logic Controller (PLC) programs to control production equipment and processes., • Create and update Human-Machine Interface (HMI) screens for operator interaction and process monitoring., • Calibrate and maintain sensors, transmitters, and other instrumentation devices used in production processes., • Install, troubleshoot, and repair electrical wiring, circuits, and components in accordance with safety standards., • Collaborate with engineers and production teams to identify opportunities for process improvement and automation., • Maintain accurate records of maintenance activities, equipment manuals, and electrical drawings., • Ensure that all work is performed in compliance with relevant safety, environmental, and regulatory standards., • Provide training and guidance to production personnel on the safe operation and basic troubleshooting of control systems., • Installs, troubleshoots, repairs the following systems: PLC’s, HMI’s, VFD Drives, Vision Systems, Motor Control Centers, Power Distribution Centers, Motors (DC, AC, Stepper, Servo, etc.), Three Phase/Single Phase - power and control circuits, Control Panel layout and component installation., • First responder to troubleshooting activities, leading, and assigning crew members and utilizing all available resources to correct controls issues and/or equipment/system breakdowns in an expedient manner., • Works with Maintenance Mechanics on shift to trouble shoot root cause of problems and puts preventative controls in place to mitigate further issue., • Collaborate with all business partners to maintain an ongoing, uninterrupted operation to produce high quality products, while maintaining the department in an acceptable manner., • Proactively evaluate obsolete equipment within the plant making recommendations for repair and/or replacement., • Other duties as assigned. Experience & Education Required: • Associates degree with 3-5 years of experience or equivalent combination of education and experience., • Technical degree or certification in electrical or controls-related field preferred., • Proficiency in PLC programming (e.g., Allen-Bradley, Siemens) and HMI development., • Strong knowledge of electrical systems, industrial controls, and instrumentation., • Familiarity with food safety regulations (e.g., HACCP, GMP) is a plus., • Excellent problem-solving and troubleshooting skills., • Commitment to safety and adherence to safety protocols., • Flexibility to work off-hours and weekends when necessary for maintenance and emergencies. Knowledge & Skills - Required • Proficient in troubleshooting PLC-based control systems; preferably Rockwell Software., • Competence in digital and analog temperature, pressure, flow, speed, and weight measurement., • Familiarity with discrete sensors., • Skilled in process loop calibration and equipment., • Proficient in configuring industrial control networks like Ethernet, Device Net, and DH+., • Experienced in working with 480V 3-phase power distribution., • Capable of working with Allen Bradley motor controls and VFDs., • Proficient in using electrical test equipment., • Prior manufacturing experience with PLCs and automation controls., • Possesses a working knowledge of electrical schematics, power distribution and controls, motor and motor controls, PLC logic controls, HMIs, and other industrial controls., • Must be a minimum of 18 years of age. Preferred • Dairy and/or food processing expertise, particularly in Mixing & Blending, Retort operations, automatic packaging, system and equipment mechanics, and sanitation and safety., • Proficiency in setting IP addresses using BOOTP and familiarity with software programs such as RSLogix 5, RSLogix 500, RSLogix 5000, Factory Talk for programming PLCs, HMIs, and Drive. Experience with WonderWare is a bonus. Confidentiality • The Controls Technician is exposed to and entrusted confidential information relative to production methods, customers and company strategy. Management Responsibility • The Controls Technician is an individual contributor role that operates under the general direction of the Maintenance Manager. Work Environment • While performing the duties of this job, the employee frequently works near moving mechanical parts, high speed and processing equipment; is occasionally exposed to wet and/or humid conditions and toxic or caustic chemicals; is frequently exposed to moderate to high noise levels in the work environment., • Must be able to see, grasp hold, walk, climb, bend, and stretch, lift up to 40 lbs., • Will spend significant time in the production environment where temperatures fluctuate, floors may be wet, and noise is a constant factor. Pay: $30-$45/hr.* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Overview Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety, ambition, optimism, reliability, ownership, diversity, & respect. Wieland is hiring an Electrical Engineer. The Electrical Engineer will be responsible for directing daily activity of Industrial Electricians to minimize equipment downtime. Additionally, this person will provide electrical/electronic expertise to troubleshoot and upgrade all plant equipment. This role is located in Buffalo, NY, and will be fully on-site. Base Salary Range: $85,000 - $105,000 May be eligible for a variable compensation plan bonus based upon company performance within the fiscal year cycle. At Wieland, we recognize that attracting the best talent is key to our strategy and success as a company. As a result, our ranges reflect our good-faith estimate to pay fairly. The final pay offered to a successful candidate will be based upon various factors unique to each individual that may include, but are not limited to, years of experience, industry knowledge, technical skills, education, qualifications, etc. Responsibilities Electrical Engineer Responsibilities: • Analyze recurring equipment problems, recommend and implement long-term solutions to increase plant productivity and efficiency., • Duties include the planning, scheduling, design, supervision, implementation, commissioning, and creating/modifying documentation and drawings of electrical/electronic projects on a small/medium scale., • Maintain and enhance plant electrical/electronic schematics and literature to provide sufficient technical resources of information and minimize electrical/electronic breakdown time., • Maintain system software backups and system documentation., • Instruct peers on updated troubleshooting techniques and attend pertinent training programs and seminars to acquire state-of-the-art knowledge of electrical/electronic industrial systems., • Maintain spare parts and test equipment to ensure effective maintenance and repair of all plant electrical/electronic equipment., • Ensure a safe and healthy work environment by adhering to company policies. Promote a climate of positive labor relations by adhering to the labor contract., • Work alongside mechanical trades and engineers in troubleshooting machine issues., • Work with production employees in understanding and resolving obstacles., • Participate in continuous improvement of ISO 14001, ISO 45001, ISO 50001, ISO 9001, IATF 16949 programs and procedures though active participation in the near miss program., • Handles containerizing and labeling universal wastes, including batteries and lamps, as well as spent aerosol cans (HW). Electrical Engineer Qualifications: • BS/BT degree in Electrical Engineering., • Two (2) years of industrial experience, including PLC, AC/DC drives, industrial instrumentation, motor controls experience required; Five (5) years industrial experience preferred., • Experience with Allen-Bradley PLCs is required., • Experience with high-power applications is required., • Six Sigma certification preferred. Qualifications Joining Wieland’s team gives you… • Benefits - Including Medical, Dental, Vision, Disability, Life & more!, • Retirement Savings - 401(k) contribution + match., • Work/Life Balance - Paid Vacation & Holidays., • Growth Opportunities - We have over 9,000+ employees worldwide and 40+ locations in North America alone. Growth opportunities are limitless!, • Wellness Programs – Wieland encourages participation in our unique and personalized approach to wellness, where you are eligible to earn healthcare premium discounts as well as HSA employer contributions based on your status within the program., • Sustainability- Wieland continues to break ground with eco-friendly solutions and push the barrier in sustainability for future generations. Wieland Buffalo Inc. is an equal opportunity employer. We strive to be a leader in diversity and inclusion, to continually lead with our values, to allow our team to develop their potential, bring their full selves to work, and fully engage with each other.

Job Description Process Control Engineer - Chemicals Location Niagara Falls, Ontario, Canada Assignment Type Direct Hire Compensation CAD $100,000-$170,000 annually Work Schedule Onsite Benefits This position is eligible for medical, dental, vision, and 401(k). About The Opportunity A large chemical and manufacturing organization is seeking a Process Control Engineer to support control systems, process automation, and operational reliability within a chemical manufacturing environment. This role is ideal for an engineer with hands-on distributed control systems experience who enjoys solving technical problems, supporting plant operations, and improving system performance. The position offers long-term growth, mentorship, and the opportunity to support highly visible manufacturing operations. Job Description The Process Control Engineer will be responsible for supporting distributed control systems, process automation, system configuration, troubleshooting, documentation, and continuous improvement initiatives. This role will work closely with plant operations, engineering, maintenance, and technology teams to ensure safe, reliable, and efficient manufacturing operations. Key Responsibilities • Develop, configure, and support distributed control system applications and related operator interfaces., • Troubleshoot control system issues and implement solutions to improve reliability and performance., • Support control system hardware, software, network components, workstations, and related infrastructure., • Assist with system lifecycle planning, upgrades, patches, and maintenance activities., • Support process safety activities, including change management, hazard reviews, and startup readiness., • Develop and maintain control system documentation, drawings, procedures, and training materials., • Support alarm management, system testing, preventive maintenance, and configuration verification., • Partner with operations, maintenance, engineering, and IT teams to support plant-wide projects., • Identify opportunities for process optimization and continuous improvement., • Provide technical support for instrumentation, automated equipment, and related plant systems. Qualifications • Experience with distributed control systems in a manufacturing or industrial environment., • Process engineering or process controls experience within chemical manufacturing or a similar industrial setting., • Experience configuring, troubleshooting, and maintaining control system applications., • Strong understanding of plant operations, process safety, and manufacturing systems., • Ability to prepare and maintain technical documentation., • Strong troubleshooting, analytical, organizational, and communication skills., • Ability to work independently and collaboratively with cross-functional teams. Preferred Qualifications • Experience with Emerson DeltaV hardware and software., • Experience with batch logic or batch processing environments., • Familiarity with industrial networking concepts and control system cybersecurity., • Experience with process historians, CAD tools, SAP, or similar plant systems., • Experience supporting instrumentation, automated valves, or related field equipment. Perks • Direct hire opportunity., • Long-term growth opportunity within a stable manufacturing environment., • Mentorship from experienced control systems leadership., • Opportunity to support process improvement and plant reliability initiatives., • Competitive compensation package. Addison Group is an Equal Opportunity Employer. Addison Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Addison Group complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. Reasonable accommodation is available for qualified individuals with disabilities, upon request.

Job Description GTI is a contract manufacturing partner supporting customers in renewable energy, power generation, infrastructure, and industrial systems. We fabricate custom designed, purpose-built enclosures and skids for our customers and perform mechanical and electrical integration in-house, delivering a true turn-key product to our customers. Our scope spans Engineering, prototype builds, through full production, requiring teams that can move fast, adapt, and execute with precision. GTI Values: Safety I Quality I Customer Obsession I Speed I Agility Overview The Electrical Lead at GTI Fabrication’s Buffalo manufacturing site is responsible for leading and overseeing all electrical work within an industrial production environment. This role supports both new construction and ongoing maintenance of manufacturing equipment, energy systems, and facility infrastructure. The Electrical Lead will supervise a team of electricians and electrical technicians, coordinate closely with maintenance leadership, engineering, and production teams, and ensure all electrical work is completed safely, efficiently, and in compliance with applicable codes and standards. This position plays a key role in minimizing downtime, improving reliability, and supporting continuous manufacturing operations. Minimum Qualifications High school diploma or GED required Completion of a recognized electrical apprenticeship program Valid electrician license or certification per New York State requirements Minimum 5 years of hands-on electrical experience in installation, maintenance, and troubleshooting Previous experience leading or supervising electricians in an industrial or manufacturing environment Strong working knowledge of NEC and OSHA safety standards Preferred Qualification Associate’s or Bachelor’s degree in Electrical Engineering or a related field Experience with industrial manufacturing equipment, motor controls, and power distribution Working knowledge of PLCs, automation systems, and industrial controls Familiarity with preventive maintenance programs Experience with electrical schematics, digital documentation, and CMMS systems Project management experience or certification (PMP a plus) Key Responsibilities Lead, mentor, and supervise a team of electricians and electrical technicians within the manufacturing facility Plan, schedule, and assign electrical work to support production, maintenance, and capital projects Ensure all electrical installations, repairs, and modifications comply with NEC, OSHA, and company safety policies Troubleshoot complex electrical issues related to manufacturing equipment, controls, and facility systems Perform and oversee inspections, testing, and commissioning of electrical systems Collaborate with maintenance, engineering, and production teams to minimize downtime and support operational goals Train team members on safe work practices, procedures, and technical skills Maintain accurate documentation including work orders, inspections, safety records, and compliance reports Manage electrical materials, tools, and inventory to ensure availability and cost control Skills & Competency Strong technical expertise in industrial electrical systems and controls Proven leadership and team management skills Excellent communication skills for coordinating with cross-functional teams Strong problem-solving and troubleshooting abilities Thorough understanding of electrical codes and safety regulations Ability to prioritize work in a fast-paced manufacturing environment Strong organizational skills to manage schedules, resources, and documentation #ZR Perks & Benefits GTI offers a competitive compensation and benefits package designed to support employees and their families while providing long-term career growth opportunities within a fast-growing manufacturing organization. Benefits may include: • Medical, dental, and vision insurance, • 401(k) with company match (where applicable), • Paid Time Off (PTO) and paid holidays, • Sick time in accordance with state and local requirements, • Company-paid life insurance and disability coverage, • Career advancement opportunities within a rapidly growing organization, • Exposure to advanced manufacturing, modular infrastructure, and large-scale industrial projects, • Collaborative, fast-paced environment with strong operational and engineering leadership, • Employee-focused culture centered on safety, quality, accountability, and continuous improvement Benefits eligibility and offerings may vary based on position, location, and employment classification. GTI promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all employees and work hard to maintain a Drug Free Workplace. Privacy Policy Terms & Conditions We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: Since 1935, Ferguson Electric has been providing the Western New York region with exceptional electric repair and construction services. We have the experience and skill to be our customer’s “connection to quality”. Our professional team has handled a majority of the construction and service contracts for the commercial and industrial facilities in the area. We have the skill, experience, and the dedication to properly address all electrical repair and construction needs. ABOUT THE ROLE Ferguson Electric’s Accounts Receivable Specialist reports to the Chief Financial Officer and is responsible to ensure accuracy and efficiency of operations, processing and monitoring incoming payments, and securing revenue by verifying and posting receipts all while strongly upholding and promoting the organization's core values. WHAT YOU MAY DO • Prepare and submit job invoicing using Salesforce and NetSuite., • Prepare and submit supplemental invoices for jobs using Salesforce and NetSuite., • Maintain customer billing details and contact information., • Ensure accurate and timely billing of electrical maintenance contracts., • Weekly billing of completed time and material projects. ABOUT YOUR QUALIFICATIONS • 2 + years’ experience in accounting or a field related to accounting and customer service., • Associates degree preferred., • Excellent organizational and communication skills (written and verbal) with a high level of attention to detail and professionalism., • Computer literate preferably in MS Word/Excel. Ferguson Electric recognizes the value of diversity in our workforce. We are committed to equal opportunity. We consider all qualified employment applicants without regard to race, religion, color, gender, age, national origin, sexual orientation, gender identity, partnership status, protected veteran status, disability, or any other status protected by federal, state, or local law. Individuals who hold legal work authorization applicable to employment at Ferguson Electric in the United States will be considered without regard to citizenship/alienage. Requirements:

Job DescriptionDescription: Since 1935, Ferguson Electric has been providing the Western New York region with exceptional electric repair and construction services. We have the experience and skill to be our customer’s “connection to quality”. Our professional team has handled a majority of the construction and service contracts for the commercial and industrial facilities in the area. We have the skill, experience, and the dedication to properly address all electrical repair and construction needs. ABOUT THE ROLE Ferguson Electric’s Safety Professional, reporting to the Director of Safety, will lead the development, implementation, and enforcement of Ferguson Electric’s safety program to ensure safe operations across all projects and company activities. This role focuses on fostering a proactive culture of safety, overseeing field inspections and training initiatives, and driving compliance with federal, state, county, and local safety regulations all while strongly upholding and promoting the organization's core values. WHAT YOU WILL DO Safety Program Leadership: o Lead the development, implementation, and enforcement of company safety policies, procedures, and programs in collaboration with the Director of Safety. o Oversee the maintenance and enhancement of the safety management system, including updating safety manuals, documents, and customer portals. o Establish, track, and report on safety goals, objectives, and key performance indicators to senior leadership. Field Safety Oversight: o Direct regular site inspections to ensure compliance with safety standards, identify potential hazards, and recommend corrective measures. o Guide project managers and field teams in developing and implementing project-specific safety plans and procedures. o Supervise the proper use, maintenance, and procurement of personal protective equipment (PPE) on job sites. Training and Education: o Develop and deliver comprehensive safety training programs for employees, subcontractors, and other stakeholders. o Mentor field staff on OSHA standards, company safety policies, and industry best practices. · o Lead awareness initiatives through toolbox talks, safety briefings, and ongoing education campaigns. · Compliance and Documentation: o Ensure full compliance with Occupational Safety and Health Administration (OSHA) standards and other applicable regulations. o Oversee the maintenance of accurate records for safety inspections, incidents, and training sessions. o Prepare and review project-specific safety plans, reports, and documentation for clients and regulatory agencies. Incident Response and Investigation: o Lead investigations of workplace incidents, near-misses, and accidents, determining root causes and implementing corrective actions. o Document incident reports and communicate findings to the Director of Safety, senior leadership, and relevant stakeholders. Collaboration: o Partners with project managers, field crews, and subcontractors to cultivate a culture of safety and accountability. o Coordinate with the Director of Safety and cross-functional teams to address safety concerns and drive continuous improvements. o Communicate effectively with internal teams and external partners to align safety objectives and best practices. Requirements: ABOUT YOUR QUALIFICATIONS • Education and Experience:, • Associate’s degree in Occupational Health and Safety, Environmental Health, or a related field; Bachelor’s degree preferred., • 5+ years of occupational health and safety experience, preferably in the construction or electrical contracting industry with at least 2 years in a leadership role., • OSHA 10 or 30-hour certification in Construction Safety is highly desirable., • Technical Skills:, • Proficiency in Microsoft Office Suite (Word, Excel, Outlook) and familiarity with safety management software or systems., • Basic knowledge of asset management/work order systems or GIS applications is a plus., • Soft Skills:, • Strong communication skills, both oral and written, to engage with employees, subcontractors, and management., • Excellent organizational and time management skills to handle multiple tasks and priorities., • Ability to work collaboratively in a team environment and build rapport with diverse stakeholders., • Proactive problem-solving skills with a focus on attention to detail and accountability., • Other Requirements:, • Working knowledge of OSHA standards and construction safety practices., • Ability to conduct field inspections and training sessions in various work environments., • Willingness to travel to job sites as needed., • Attributes: Strategic thinker, detail-oriented, proactive, and able to thrive in a fast-paced environment.

Job Description Power Drives, Inc. is a Buffalo‑based manufacturer specializing in custom‑engineered hose, tube, and fluid conveyance systems for a wide range of industrial and mobile equipment applications. Founded in 1946, PDI is known for delivering high‑quality, reliable solutions backed by strong engineering expertise and decades of industry experience. Quality EngineerObjective Perform analysis, research and testing to promote a technical understanding of the processes involved in quality. Promote and be actively involved in the process improvement activities, perform duties as assigned by management in regard to new product development, part approval processes, and calibrations and test methodologies. This role is 100% onsiteMinimum Requirements • 2 Year Technical Degree, • 4 Year Degree Preferred, • 2 Years Manufacturing Quality Experience, • Experience in Automotive Quality Systems ISO/TS, • Experience writing and maintaining Control Plans, PFMEAs, Process Flow Diagrams and Quality Work Instructions, • Experience in problem solving techniques, specifically 3 Legged, 5 Why and 8D, • Experience in PPAP processJob Requirements, • Working knowledge of MS office suite (Excel, Word, PowerPoint, etc.…), • High level of verbal and written communications skills, • Ability to manage and prioritize multiple priorities, • Working knowledge of AIAG standard practices, • Ability to work with minimal supervision, • Working knowledge of calibration systemEssential Duties and Responsibilities, • Verification and validation APQP activities, • Management of PDI's calibration system, • Review and submission of all customer PPAP requests, • Review and approval of all vendor PPAP submissions, • Vendor returns and associated Corrective Actions, • Participating in PDI's LPA and internal system audit processes, • Supervising facility Quality Technicians, • Maintenance of PDI's PFD, Control Plans, Gage R&R's, and Inspection Systems, • Communicating with the customer in regards to APQP, Corrective Action, Product/Process Improvement, • Participating in PDI's supplier improvement program, • Performing on site vendor evaluations, • Participating in PDI's continuous improvement process, • Other duties as assigned by the facility Quality Manager, • Manage and maintain the planning and execution of PDI's verification and validation processes from RFQ through production to ensure proper controls are consistently utilized by both PDI and our vendors. Pay Range Starting at $65,000-90,000 plus annual incentive plan The referenced pay range represents the minimum and maximum compensation for this job. Individual salaries will be set within the compensation range and determined by factors such as market data, education, experience, qualifications, expertise, and internal equity considerations. 2026 Buffalo's Business First Best Places To Work Finalist

Job Description We are seeking an experienced, dynamic experienced Manufacturing Engineer to drive manufacturing excellence, optimize production processes, and implement continuous improvement initiatives. This position offers a unique opportunity for an individual who wants to make positive, welcome changes to our manufacturing operations. For the right candidate, this role provides a direct pathway to professional growth and future management opportunities. Pay: up to $95k/year Why we are different: Since 2006, this Manufacturer has been 100% employee-owned. Through our Employee Stock Ownership Plan (ESOP), our team members directly share in our growth—in fact, our ESOP share value increased by nearly 24% last year. We are a tight-knit team of 34 employees where every team member has the opportunity to make a visible impact, take ownership, and truly value their work. Key Responsibilities Process Engineering function: • Responsible for process engineering functions which includes preparation of all necessary information required to run any job including master files, blueprints, specifying material, any outside service vendors, tooling requirements, accurate machine standards, clarification of any notes and/or exceptions, and all necessary customer contact required to complete the job., • Lead/participate in Kaizen events and use Lean manufacturing techniques as required to make processes more efficient., • Develop and implement optimal, cost-effective manufacturing methods on new and existing products., • Revise methods suggested by new equipment, process changes, and special requirements. Make recommendations to improve manufacturing methods for cost-reduction, quality improvement and efficiency., • Create a work order establishing the initial job schedule. Consults with manufacturing to develop accurate lead time and shipping schedules., • Order entry and maintenance of customer record files in accordance with established policies and procedures., • Calculate materials for new orders and review any material certifications and if acceptable, pass them on to Quality Control for filing with the job., • Perform related duties as assigned, within the scope of the Engineering/Purchasing Department. Estimating & Customer Relations • Review Requests for Quote (RFQs) and prepare detailed estimate sheets (time standards, material specs, outside services, tooling)., • Maintain and develop inside sales relationships with customers through proactive quote follow-up., • Serve as the customer technical contact to clarify job notes, exceptions, and order requirements. Operations Support • Create work orders, establish initial job schedules, and consult with production on accurate lead times., • Manage order entry and maintain customer record files per company policies., • Calculate material requirements for new orders and review material certifications for Quality Control. Qualifications & Skills • Experience: 4–6 years of experience in a metal manufacturing environment (Required)., • Education: Bachelor’s degree in manufacturing, Industrial, or Mechanical Engineering preferred. Associates degree with significant relevant experience will be fully considered., • Software Skills: Proficiency in AutoCAD and Microsoft Office (Word, Excel, Outlook) is required. Experience with SolidWorks is highly helpful., • Core Competencies: Strong mechanical aptitude, excellent problem-solving skills, and a high level of attention to detail., • Teamwork: A collaborative mindset with a willingness to "pitch in" across departments in a smaller shop environment. Benefits & Perks • 100% Employee Ownership (ESOP): Receive company-funded shares annually., • Career Growth: Direct visibility by leadership with pathways into engineering management., • Impact: A smaller operation where your ideas are valued and quickly implemented. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Retirement plan, • Vision insurance \nCompany Description Express Employment Professionals of Buffalo is a locally owned staffing agency that connects job seekers with short-term, long-term, and permanent employment opportunities across a variety of industries. As part of the global Express Employment Professionals franchise network, we help businesses find qualified talent while providing associates with meaningful work opportunities. Express Employment Professionals of Buffalo is a locally owned staffing agency that connects job seekers with short-term, long-term, and permanent employment opportunities across a variety of industries. As part of the global Express Employment Professionals franchise network, we help businesses find qualified talent while providing associates with meaningful work opportunities.