Trabajos inspection en Fresno, CaliforniaCrear alertas

Job Description PAY RATE: $20.00 PH The Salvation Army, an international movement, is an evangelical part of the universal Christian Church. Its message is based on the Bible. Its ministry is motivated by the love of God. Its mission is to preach the Gospel of Jesus Christ and to meet human needs in His name without discrimination. ABOUT THE ARC The Salvation Army (TSA) Adult Rehabilitation Center (ARC) is a no-fee program to assist men & women in their journey to complete our rehabilitation program. We are grateful for the contributions our valued employees make toward the maintenance and effectiveness of the programs. The organization is indebted to and dependent on the diligence and devotion of its employees. ABOUT OUR OPERATIONS TEAM Become part of the dedicated Operations Team at The Salvation Army! Together we can continue to serve and impact our local community, through the commitment to “Do The Most Good” at our Fresno ARC Distribution Center, which supports the Adult Rehabilitation Program. This is an opportunity to work as team and utilize your skills as a driver, while contributing to the success of our Program and its participants. ESSENTIAL JOB DUTIES: • Follow daily routing directions and avoid going off route without exception, unless directed by the Transportation Supervisor or their designee., • Manage time daily to ensure route is completed within the approved work schedule. Routes are to be 100% completed each day, without exception, unless approved by the Transportation Supervisor or their designee., • Responsible for the safe loading and unloading of assigned truck. Assist in the safe loading or unloading of other trucks as requested., • Handle all donated material with safe handling procedures and assigned personal protective equipment at all times. Donations must be handled properly to ensure they return damage free to their destination., • Train, instruct and supervise truck helper in their WTA, keeping in mind that helper is in a rehabilitation program and that good personal and professional work habits are taught by example, as well as by instruction., • Responsible for Bag & Tag as instructed by Supervisor and procedure., • All pre and post checks must be completed daily. Any exceptions found during the pre-check inspection must be reviewed by the Transportation Supervisor prior to operating the vehicle. Any post-check exceptions must be reviewed with the Transportation Supervisor prior to clocking out for the day. All equipment on the truck must be in working order and properly secured for transport., • As a representative of The Salvation Army, ensure that all customers are treated courteously and with good customer service. Immediately report all donor problems and concerns that occur during donation pick-ups to supervisor, through dispatch., • Promptly report to immediate supervisor all accidents involving truck, personal injury or property damage., • Abide by all DOT regulations and state and local laws while maintaining a safe driving record. Attend all driver safety meetings as required., • Report all infractions of safety procedures to the Transportation Supervisor., • Adhere to all meal and rest breaks per state law and company policy., • Other duties and responsibilities as may be assigned, from time to time, by the Transportation Supervisor, Director of Production or their designated representatives. QUALIFICATIONS: • High School diploma or equivalent., • Valid driver’s license, • Clean Driving Record, • Strong time management and customer service skills, • Ability to operate electronic equipment used for daily route information, • Strong oral and written communication skills PHYSICAL REQUIREMENTS: • Ability to sit, walk, stand, bend, squat, climb, kneel, and twist on an intermittent or continuous basis., • Ability to grasp, push, pull objects such as files, file cabinet drawers, clothing carts, merchandise carts, rolling clothing racks, fixtures, furniture dollies, platform trucks and carts, hand trucks and miscellaneous carts., • Ability to operate a motor vehicle, • Ability to lift up to 100lbs, • Ability to perform various repetitive motion tasks

Job Description WAWONA FROZEN FOODS ABOUT THIS COMPANY We pride ourselves on being family-owned and operated and treating our employees like family. Working at a company where safety and quality are top priorities. Every day, Wawona Frozen Foods' commitment to excellence justifies its reputation for delivering superior quality, value, and service. Wawona's state-of-the-art production methods and facilities ensure consistent high-quality products – all while maintaining the highest food safety standards as required by the USDA and state regulators. ABOUT THIS ROLE The role of a general production laborer with Wawona Frozen Foods provides a wide range of activities including housekeeping, stacking, moving product, dumping product, weight testing, assisting operators and batchers, or helping in other departments as needed. This role is essential to our operations and candidates must be able to follow clear directions, work in a loud, cold environment, and perform repetitive work as part of a team. DUTIES INCLUDE • Active participation in Wawona Frozen Foods safety program to maintain a healthy and injury-free environment., • Participate in training and company meetings to facilitate individual and company growth., • Follow all GMP, HAACP, Food Safety, Food Defense, and SQF policies and procedures., • Stacking of product in accordance with finished product specifications., • Assist with production., • Clean-up work areas including removing debris, mop, sweep, or other housekeeping duties as assigned or needed., • Load and unload items from cart and dollies., • Mix, measure or pour ingredients. Ensure conformance to specifications., • Inspect fruit by feel and visual inspection., • Notify supervisors or lead of any issues with equipment., • Package, sort, and stack finished goods., • Complete box counts and ensure stacking according to directions., • Efficiently and safely move product to proper areas for use following all department and QA procedures., • Transfer finished goods to pallets or holding freezers. REQUIREMENTS • 0-2 years' experience working in a manufacturing or similar setting., • Ability to read, write, follow instructions, and recognize similarities and difference., • Ability to perform operations using units of weight measurements, quality standards, and quantity measurements., • Ability to do continuous repetitive work., • Ability to work independently with minimal supervision., • Excellent listening skills and strong communication skills, • A strong work ethic and a can-do attitude, • Self-motivated and self-starter, • Ability to work with various employees and employee levels while building rapport and respect., • Must be punctual and regular attendance is required., • Understand and follow all color-coding rules as stated in procedures for utensils, containers, and other equipment. LOCATION • This position will work out of our Cedar or Alluvial location. WHY SHOULD YOU APPLY • We learn together. We believe in supporting all employees with all the training, resources, and tools to be successful. We invest in our people, we learn together, we take the time to train, and we grow together. We celebrate OUR people and want each employee to have a long career with Wawona Frozen Foods., • We focus on building and keeping relationships, going above and beyond, and offering world-class service. Empowering each team member to make Wawona Frozen Foods better every day, come up with improvements and suggest suggestions, and help us be innovative. We are proud of our history and want to continue to leave a legacy., • Wawona Frozen Foods promotes a work environment that encourages problem-solving, collaboration, and a culture of growth. We roll up our sleeves, we get dirty, we exemplify true grit, and we support each other because we truly care about our people., • We pride ourselves on having a diverse team matching our diverse product base. We have an inclusive culture where different professional and personal perspectives, ideas, and suggestions are respected and welcomed., • We pride ourselves on the fast-paced environment that our season creates, and we recognize that if it was not for our people working hard that we would not be as successful., • We strive to deliver the best fruit products available and to be a valued partner in every one of our customer's successes., • We take the time to build a relationship with our customers and make sure we are producing and delivering the best products specific to your needs. PHYSICAL AND/OR MENTAL DEMANDS While performing the duties of this job, the employee is required to: • Work in an environment where there can be medium to loud noise and in cold temperatures., • Stand and walk, feel, reach with hands and arms. Occasionally requested to sit and talk or hear., • A fast-paced environment that requires high attention to details and minimal down time., • Occasional lifting and transporting of moderately heavy objects, such as buckets of fruit, boxes, pails, etc. Lifting requirement: Must be able to lift up to 40 lbs. independently., • Other duties as assigned requiring repetitive tasks, duties, or assignments such as sorting, packing, stacking, or cutting., • Work flexible/varying schedules to support the team, customers, and deadlines., • Specific vision abilities required by this job include peripheral vision and ability to see all colors., • You will be regularly exposed to moving mechanical parts, extreme cold, and vibration. Exposure to cleaning products and agents for the sanitation of equipment and machinery regularly., • Wear appropriate personal protection equipment and adhere to dress code as outlined for working in a food manufacturing facility. ADDITIONAL INFORMATION Applicants must be fully authorized to work in the U.S. and physically be in the U.S. Wawona Frozen Foods is an equal opportunity employer and considers qualified applicants for employment without regard to race, gender, age, color, religion, disability, veteran status, sexual orientation, gender identity, or any other protected factor. NOTICE TO RECRUITERS, EMPLOYMENT AGENCIES, AND/OR VENDORS Please note that Wawona Frozen Foods does not accept unsolicited resumes from recruiters, employment agencies, or vendors. Without a signed Recruitment Fee Agreement, Wawona Frozen Foods will not consider or agree to payment of any referral compensation or recruiter fee. If a recruiter or agency submits a resume or candidate without Wawona Frozen Foods' authorization, Wawona Frozen Foods is without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Wawona Frozen Foods. Verbal commitments from any Wawona Frozen Food employees will not be considered binding terms. This applies to all Wawona Frozen Foods locations and offices. It is the responsibility of all third-party recruiters and vendors to know this policy.

Job DescriptionHIRING!!!!!! $16.90/HR - General Production Worker – 1st Shift Job Description This role supports a high-volume fruit production facility by packing, stacking, and inspecting products on the production line. You will work at the Cedar and Alluvial locations, helping ensure fruit is packaged safely, efficiently, and to quality standards. English comprehension is required to follow instructions, safety procedures, and production guidelines. Responsibilities • Pack and stack fruit on the production line according to established procedures and quality standards., • Assist with general production tasks, including loading, unloading, and organizing materials as needed., • Inspect fruit and packaging for quality, cleanliness, and correct labeling, reporting any issues to the appropriate personnel., • Operate within both Cedar and Alluvial facilities as assigned, maintaining flexibility to move between locations., • Lift, carry, push, and pull materials and products, including lifting up to 40 pounds and pushing or pulling up to 400 pounds with equipment support., • Maintain a clean and organized work area, following all food safety and sanitation guidelines., • Follow all safety protocols, including proper use of personal protective equipment such as smocks, hair nets, beard nets, bump caps, and non-slip shoes., • Work efficiently in a fast-paced, repetitive production environment while meeting production targets and deadlines., • Adapt to varying production needs, including different lines, tasks, and schedules as required., • Communicate effectively in English to understand instructions, safety information, and production updates. Essential Skills • Ability to perform general production, packing, and stacking tasks in a food manufacturing environment., • Capability to lift at least 40 pounds and to push or pull up to 400 pounds using appropriate equipment., • Willingness and ability to perform physical, repetitive work for the duration of the shift., • Flexibility to work different schedules, including day and night shifts and weekends as needed., • English comprehension skills sufficient to understand instructions, safety guidelines, and production requirements., • Ability to work in extreme temperatures, including hot and cold environments., • Reliability and punctuality to support consistent production operations., • Attention to detail for basic inspection of products and packaging. Additional Skills & Qualifications • Previous experience in general production, packaging, or food processing environments., • Experience with packing, stacking, and general labor in manufacturing or warehouse settings., • Comfort working in a structured, process-driven environment with set procedures and standards., • Willingness to work in different roles on the production floor, including stacking, packing, and inspection. Why Work Here? You will join a well-regarded food production organization that is building a strong presence in the local community. The company offers seasonal work with the potential to transition toward year-round operations, providing opportunities for ongoing employment. You will gain hands-on experience in food manufacturing, develop practical production skills, and work in a team-oriented environment where reliability and hard work are recognized. Work Environment The role is based in a peach and strawberry food production facility operating at Cedar and Alluvial locations. You will work on a production floor that involves exposure to extreme temperatures, including both hot and cold areas. The environment is fast-paced, with physical and repetitive tasks such as lifting, stacking, and moving products. Personal protective equipment is required and provided, including smocks, hair nets, beard nets if needed, bump caps, and non-slip shoes. The facility operates multiple shifts, with a 1st shift from 6:00 a.m. to 2:30 p.m. and a 2nd shift from 3:00 p.m. to 11:30 p.m., and schedules may include day or night (graveyard for sanitation only) and weekend work as needed. Job Type & Location This is a Contract position based out of Clovis, CA. Pay and Benefits The pay range for this position is $16.90 - $16.90/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clovis,CA. Application Deadline This position is anticipated to close on Jul 25, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionHIRING!!!!!! $16.90/HR General Production Worker – 1st Shift Job Description This role supports a high-volume fruit production facility by packing, stacking, and inspecting products on the production line. You will work at the Cedar and Alluvial locations, helping ensure fruit is packaged safely, efficiently, and to quality standards. English comprehension is required to follow instructions, safety procedures, and production guidelines. Responsibilities • Pack and stack fruit on the production line according to established procedures and quality standards., • Assist with general production tasks, including loading, unloading, and organizing materials as needed., • Inspect fruit and packaging for quality, cleanliness, and correct labeling, reporting any issues to the appropriate personnel., • Operate within both Cedar and Alluvial facilities as assigned, maintaining flexibility to move between locations., • Lift, carry, push, and pull materials and products, including lifting up to 40 pounds and pushing or pulling up to 400 pounds with equipment support., • Maintain a clean and organized work area, following all food safety and sanitation guidelines., • Follow all safety protocols, including proper use of personal protective equipment such as smocks, hair nets, beard nets, bump caps, and non-slip shoes., • Work efficiently in a fast-paced, repetitive production environment while meeting production targets and deadlines., • Adapt to varying production needs, including different lines, tasks, and schedules as required., • Communicate effectively in English to understand instructions, safety information, and production updates. Essential Skills • Ability to perform general production, packing, and stacking tasks in a food manufacturing environment., • Capability to lift at least 40 pounds and to push or pull up to 400 pounds using appropriate equipment., • Willingness and ability to perform physical, repetitive work for the duration of the shift., • Flexibility to work different schedules, including day and night shifts and weekends as needed., • English comprehension skills sufficient to understand instructions, safety guidelines, and production requirements., • Ability to work in extreme temperatures, including hot and cold environments., • Reliability and punctuality to support consistent production operations., • Attention to detail for basic inspection of products and packaging. Additional Skills & Qualifications • Previous experience in general production, packaging, or food processing environments., • Experience with packing, stacking, and general labor in manufacturing or warehouse settings., • Comfort working in a structured, process-driven environment with set procedures and standards., • Willingness to work in different roles on the production floor, including stacking, packing, and inspection. Why Work Here? You will join a well-regarded food production organization that is building a strong presence in the local community. The company offers seasonal work with the potential to transition toward year-round operations, providing opportunities for ongoing employment. You will gain hands-on experience in food manufacturing, develop practical production skills, and work in a team-oriented environment where reliability and hard work are recognized. Work Environment The role is based in a peach and strawberry food production facility operating at Cedar and Alluvial locations. You will work on a production floor that involves exposure to extreme temperatures, including both hot and cold areas. The environment is fast-paced, with physical and repetitive tasks such as lifting, stacking, and moving products. Personal protective equipment is required and provided, including smocks, hair nets, beard nets if needed, bump caps, and non-slip shoes. The facility operates multiple shifts, with a 1st shift from 6:00 a.m. to 2:30 p.m. and a 2nd shift from 3:00 p.m. to 11:30 p.m., and schedules may include day or night (graveyard for sanitation only) and weekend work as needed. Job Type & Location This is a Contract position based out of Clovis, CA. Pay and Benefits The pay range for this position is $16.90 - $16.90/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clovis,CA. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Location: Tuolumne Meadows, Yosemite National Park, CA Period of Performance: One (1) base year and four (4) option years Join a team of ever-growing professionals who look to make a difference on projects both domestically and internationally. Our organization is growing, and we believe your career should too. Project Overview: Project Solutions Inc. is seeking an experienced, full- time Construction Management Representative for the replacement of the existing wastewater treatment plant at Tuolumne Meadows in Yosemite National Park, including new piping, a holding tank, and related site and utility work. It is a multi-year construction effort expected to take place over several construction seasons due to the project’s scale and remote location. The role is to serve as an on-site Construction Manager Representative (CMR), providing construction management support such as monitoring work, reviewing documents, and facilitating communication between stakeholders. This role is contingent upon award of project. Responsibilities and Duties: • Observe and monitor construction activities to ensure work is performed in accordance with contract requirements and quality standard, • Document daily field activities, including material deliveries, work progress, and deficiencies, and prepare regular reports, • Review and analyze project documentation, including submittals, RFIs, schedules, payrolls, payment requests, and as-built drawings, • Verify construction work and materials, ensuring they meet contract specifications before and during installation, • Monitor construction quality and safety compliance, and report accidents or issues to the Government, • Facilitate and lead meetings, including weekly progress meetings, and prepare agendas and meeting minutes, • Coordinate and document inspections, including preparatory, initial, and follow-up inspections, • Review construction schedules and updates, including Time Impact Analyses and recovery plans, • Perform or support cost estimating and proposal evaluations, including preparation of Independent Government Estimates, • Support contract administration and negotiations, including scope development, field investigations, and documentation of negotiations, • Maintain and organize project records, including contract documents, reports, change orders, and closeout documentation, • Communicate with Government representatives (COR/CO) on technical issues and project status while not directing the construction contractor Required Education, Skills, and Abilities: Education/Certification: • Minimum of a four-year Bachelor’s degree in either one of these- Engineering, Construction Technology, Construction Management or a related field, • Degree must be from an ABET-accredited engineering college or university, • OSHA 30-hour Construction Safety training (required), • Construction Quality Management for Contractors (CQM-C) certification (required) Experience: • Minimum of five (5) years of relevant construction and/or engineering experience demonstrating knowledge of construction-related activities, • Experience in construction management and project coordination, including documentation and communication across stakeholders, • Proven ability in ensuring compliance with contract documents, including reviewing requirements and verifying adherence during construction, • Experience with inspection and verification of construction work, including reviewing as-built drawings and validating installed work, • Experience reviewing payment invoices and construction documentation, ensuring accuracy and completeness, • Demonstrated experience in leading and facilitating meetings, including progress meetings and general coordination sessions, • Experience in cost estimating and proposal analysis, including use of industry-standard estimating tools and preparation of independent cost estimates, • Experience in schedule review and analysis, including baseline schedules, progress updates, Time Impact Analyses (TIA), and recovery schedules using tools like Primavera or Microsoft Project, • Experience working on projects of similar scope and complexity, including wastewater treatment plants, remote projects, and projects involving coordination with federal government personnel (PMs, COs, CORs) Key Attributes & Skills: • Strong construction management knowledge, including understanding of construction processes, quality control, and project execution, • Effective communication and coordination skills for interacting with Government representatives and facilitating meetings, • Ability to interpret and apply contract documents, ensuring compliance with specifications and requirements, • Inspection and observation skills to verify construction work, identify deficiencies, and ensure adherence to plans, • Proficiency in cost estimating and analysis, including preparation of independent government estimates using industry-standard tools, • Strong schedule analysis capabilities, including reviewing baseline schedules, updates, Time Impact Analyses (TIA), and recovery plans, • Computer literacy and software proficiency, including Microsoft Office (Word, Excel, Project, Teams), Adobe Acrobat, and construction management tools like Primavera and ProjectTeam, • Knowledge of safety and compliance standards, including OSHA requirements and construction safety practices, • Effective communication and coordination skills, including facilitating meetings and maintaining professional, neutral communication, • Ability to observe, inspect, and evaluate construction work for quality, progress, and compliance, • Physical ability to walk and climb regularly on-site to monitor construction activities., • Ability to work independently in a field-based environment, • Strong attention to detail and documentation accuracy for construction records and reports What Does PSI Offer You? • Three options for medical plans plus dental and vision insurance offerings, • 24/7 healthcare access to telehealth services for your convenience, • HSA, • Company life insurance options for you and your family, • Short-term and long-term disability offerings, • PLUS an $800 monthly allowance is provided to offset your PSI insurance premium costs, • 401(k) with a 4% employer match, • Generous PTO, paid-federal holidays, and sick leave, • Always the opportunity for professional development The information contained herein is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time. Benefit offerings subject to change. Project Solutions, Inc. is an equal opportunity employer, women, individuals with disabilities, protected veterans and minorities are encouraged to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. EEO/M/F/Vets Powered by JazzHR ML04g1o3Qa

Job Summary: Provide security details as outlined in the post orders and establish working relationships with customers, local law enforcement, and fire departments at the Save Mart Center. Security personnel will always perform their job duties with a constant awareness of their surroundings, taking note of all activity that takes place in the assigned area. Security Officers must maintain a professional image and always demonstrate excellent customer service. Basic Functions: • Control of entrances and movement of pedestrian and vehicle traffic., • Patrol of buildings and perimeters., • Escort of material and personnel., • Inspection of security and fire exposures., • Special assignments. Responsibilities: Duties may vary depending on department size, organizational structure, geographic location and post assignments. Reasonable accommodations may be made to allow for certain ADA requirements. The overall general function of officers is to provide security detail as described below (Note: duties may vary depending on post orders): • Be on time and report to post in full uniform., • Maintain professional image that includes greeting customers, visitors and employees in a polite and friendly manner., • Be proactive in knowing all revisions to post orders and general information distributed by the customer and AFS., • Patrol physical property or maintain fixed post position, being diligent to report any suspicious activity and investigate accidents and criminal acts., • Monitor cameras or equipment in a continuous fashion as outlined in the post orders., • Maintain a working knowledge of all emergency policies, procedures and regulations to be able to respond to alarms, incidents and emergency situations., • Complete Daily Activity Reports, Log Book entries, Incident Reports and all relevant reports related to job assignment., • Make recommendations to management on better safety and loss prevention processes as identified during daily routine., • Have knowledge of any life safety systems, fire panels, CCTV system computer, and other such equipment to complete job assignments. Ensure continuous and safe operation of all elevators and access doors. Know authorized contractor personnel who are responsible for maintenance and upkeep of equipment., • Ensure training and compliance guidelines are met as outlined by AFS and other agencies regulating the customer / market., • Communicate on a daily basis with Security Supervisor any new Security Issues or changes that need to be considered or implemented. Skills and Abilities:, • A security officer is to be honest, alert and well-disciplined as the custodians of employee and customer property and safety., • Constant and dedicated vigilance., • Strong customer service skills, exemplifying Andy Frain Services Mission Statement., • Ability to be a hands-on, results oriented employee, handling multiple priorities simultaneously., • Ability to facilitate progressive change, work as part of a team and follow directions., • Work with a sense of urgency., • Strong oral and written communications skills. Prefered Qualifications Active Guard Card certification through the California Bureau of Security and Investigative Services (BSIS) is strongly preferred. Prior experience in security, crowd management, or guest services. Candidates without a Guard Card must be willing to obtain certification prior to assignment This description portrays in general terms the type and level(s) of work performed and is not intended to be all-inclusive, nor the specific duties of any one incumbent. Andy Frain Services reserves the right to modify, supplement, delete or augment the duties and responsibilities specified in the position description, in the Company's sole and absolute discretion. Duties other than those expressly specified may be assigned from time to time. License #: PPO14167 3200 Guasti Road Suite 100 Ontario, CA 91764

Job Description We are a family-owned trash company in the Clovis Foothill area. We are looking for a full time rear-loader refuse driver. Qualification: • Must have 1 year of Commercial driving experience., • Clean driving record, • Able to pass a random drug test, • Live within 30-45 minutes from our yard in Auberry, CA, • Work independently with minimal or no supervision, • Able to perform routine inspection and maintenance on vehicles. Monthly bonus based on 100% attendance each month. Company DescriptionWe are a family-owned trash company in the Clovis Foothill area that has been in business for the last 45 years. We value our employees, treat them like family and really believe teamwork leads to a successful partnership.We are a family-owned trash company in the Clovis Foothill area that has been in business for the last 45 years. We value our employees, treat them like family and really believe teamwork leads to a successful partnership.

Take your CDL-A career further! Our drivers work hard to move, supply, and provide for America's favorite brands. Being reliable and dedicated to safety has defined our success as an industry leader for 130+ years. Join McLane and discover the driving difference-we provide you with industry-leading pay, strong and secure client relationships, and get you home safely and more often. That's why our drivers build long-lasting careers with us. Benefits you can count on: • Pay Rate: Drivers make $80,000 to $90,000., • Day 1 Benefits: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance., • Paid holidays: earn vacation time, and sick leave accrual from day one., • 401(k) Profit Sharing Plan after 90 days., • Additional benefits: pet insurance, maternity/paternity leave, employee assistance programs, discount programs, tuition reimbursement program, and more! What you'll do as a CDL-A Delivery Driver: • Inspect tractor-trailer for defects pre/post trip and submit DOT inspection report indicating condition., • Inspect bill of lading and store keys for accuracy in off-hour delivery., • Drive tractor-trailer to destination, applying knowledge of commercial driving regulations and skill in maneuvering vehicle on the road and on customer premises., • Maintain driver log (Manual or Peoplenet) according to DOT regulations, documenting delivery receipt, product temperatures and exceptions., • Unload trailer, delivering product into customer premises., • Other duties as assigned. Qualifications you'll bring as a CDL-A Teammate: • At least 21 years of age, • Valid Class A commercial driver's license (CDL-A), • At least 1 year or 50,000 verifiable miles of tractor-trailer driving experience, • Must meet McLane's MVR and risk rating qualifications, • This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards. Fit the following? We want you here! • Safety-focused, • Reliable, • Adaptable, • Dedicated Moving America forward - together. We've been forging our path as a leader in the distribution industry since 1894. Building an expansive nationwide network of team members for 130+ years has allowed us to stay agile for our clients across the restaurant, retail, and e-commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing team member training, and emphasizing our people-centered culture. Candidates may be subject to a background check and drug screen, in accordance with applicable laws. All applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. For our complete EEO and Pay Transparency statement, please visit https://www.mclaneco.com/legal/employment/

Job Description Traveling Maintenance Technician - Inland Empire Based Job Summary: SoCal Property Management, Inc. is seeking a skilled Traveling Maintenance Technician to join our elite Maintenance Strike Team based out of the Fresno area. As a key member of our team, you will travel to properties across multiple regions to provide maintenance support and property stabilization. If you are a hands-on professional with a strong background in multi-family maintenance or construction, and a passion for delivering high-quality work in a fast-paced environment, we encourage you to apply. Key Responsibilities: Travel to properties across multiple regions to provide maintenance support and property stabilization Perform unit turns, repairs, capital improvement projects, and emergency maintenance work Complete skilled tasks including plumbing, electrical, carpentry, drywall, painting, appliance repair, and basic HVAC Troubleshoot and resolve maintenance issues efficiently with minimal oversight Support inspection preparation and rapid project completion timelines Work alongside regional teams to maintain company standards and improve property performance Maintain accurate work order documentation and project updates Properly use and maintain tools, equipment, and materials Maintain a safe, clean work environment and follow OSHA/company safety standards Represent the strike team professionally while onsite and provide excellent service to residents and site teams Qualifications: Minimum 3-5 years of multifamily maintenance or construction experience Strong skills across multiple trades; ability to work independently Experience with unit turns, renovation projects, or high-volume maintenance environments preferred Valid driver's license with clean driving record Ability to lift 50+ lbs, climb ladders, and work in varying environmental conditions Strong communication and teamwork skills Willingness to travel up to 75%, including overnight stays and occasional extended hours Compensation & Benefits: Full-time position Paid mileage for travel Health, dental, and vision insurance Paid time off Retirement plan Work Location: Based in the Fresno Area with frequent travel to other regions as needed. If you are a driven and detail-oriented professional looking for a challenging and rewarding role, we encourage you to apply to this exciting opportunity.

Job Description SUMMARY Reports to the Community Manager or Maintenance Supervisor (if applicable). Keeps property in clean and orderly condition; repairs and maintains various exterior and interior common areas, buildings, and streets by performing the following duties. $23.00 per hour with a $500 potential yearly bonus. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Knows and adheres to all safety procedures. Maintains sidewalks, common areas, courtyards, stairways, vacant lots, and trash enclosures in clean and presentable condition. Removes pallets, trash, and other debris from common areas. Performs routine building, grounds, and equipment maintenance under direction of Community Manager or Maintenance Supervisor. Operates or assists the Maintenance Supervisor in the operation of park equipment and systems to ensure proper park operations. Follows instructions re: priority of maintenance work orders given by Community Manager or Maintenance Supervisor. As directed by Community Manager or Maintenance Supervisor, makes a thorough inspection of entire property, noting any maintenance or mechanical problems requiring repair, including such items as the following: asphalt paving, concrete, sidewalks, resident driveways, parking bumpers and walls, landscaping, irrigation, trash enclosures and bins, building structure and walls, windows, electrical panels, building security alarm system (if applicable), interior and exterior lighting, signage, excess trash in common areas, painting, and similar issues. Reports to Community Manager or Maintenance Supervisor any need for repairs or maintenance, and any mechanical problems; recommends an action plan for addressing issues. Also observes and reports all resident lot violations and health and safety issues to Property Manager promptly—especially emergency and/or liability issues. Provides guidance to and supervision of service providers and contractors in the performance of their duties at the park. In conjunction with Community Manager or Maintenance Supervisor, assists in obtaining bids on contracted repair work, as needed. Oversees third-party park improvement projects to protect existing flooring, walls, etc. from worker damage, and to ensure proper completion of contracted work. Responds immediately to resident complaints and after-hours issues as dispatched by the Community Manager or Maintenance Supervisor. Takes corrective action, as instructed. Maintenance personnel may receive after-hour calls to handle emergency issues at the park. A rotating schedule may be established if sufficient personnel are available. Establishes and maintains an HVAC maintenance schedule, for park’s common areas. In conjunction with Community Manager or Maintenance Supervisor, keeps an accurate log of all plumbing, HVAC, roofing, asphalt, and electric work performed at the property. When applicable, coordinates and executes 10% annual meter change-out program for gas, water, and electric meters. In conjunction with Property Manager or Maintenance Supervisor, keeps detailed log of meter change-outs. When applicable, tours all park-owned homes to perform cleanup and ensure that home and lot are in compliance with park’s Rules & Regulations. Participates in staff meetings. Ensures that storage equipment and electrical rooms are in compliance with all safety requirements. Stores all paint and similar hazardous materials in fire-proof storage cabinets. Has a working knowledge of the Mobile Home Residency Law (the “MRL”, California Civil Code Section 798). Knows and understands the park’s Rules & Regulations. Performs other tasks as directed by the Community Manager or Maintenance Supervisor. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); or two (2) years related experience and/or training; or equivalent combination of education and experience. Must have knowledge of safety procedures related to job tasks. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS N/A OTHER SKILLS AND ABILITIES Computer skills (basic level): Office 365 – Outlook, Word, Excel Must be detail-oriented, flexible, and multi-task oriented Strong organization and people skills Ability to appear for work on time Ability to follow directions from a supervisor Ability to interact well with co-workers and customers (includes tenants, vendors, etc.) Ability to understand and follow posted work rules and procedures Ability to accept constructive criticism PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls and reach with hands and arms. The employee frequently is required to stand, climb or balance, stoop, kneel, crouch, or crawl; hear; and smell. The employee must frequently lift and/or move up to 40 pounds and occasionally lift and/or move up to 50 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee occasionally works near moving mechanical parts; in high, precarious places; and in outside weather conditions and is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and risk of electrical shock. The noise level in the work environment is generally moderate. COMMENTS Goals and Objectives are established within thirty (30) days of hire, and annually thereafter.

Job DescriptionDescription: Position: FABRICATION TECHNICIAN FOREMAN Classification: FULL-TIME / NON-EXEMPT Location: FRESNO, CA Reports To: FABRICATION & RENTAL MANAGER Summary/Objective The role of the Fabrication Technician Foreman position is to ensure the field personnel are operating within the guidelines and rules as established by the company. The Foreman shall promote, enforce, monitor and assist in establishing any new or current policies for the Service Department. Our expectation of the Fabrication Technician Foreman is for all the inspections, preventive maintenance, repairs, and installations performed on all boilers, pumps, and other equipment at client sites. The foreman oversees jobsites, coordinates manpower, helps process all required paperwork and work along with crew using tools when time permits or the project dictates. Be fully prepared to install the equipment called for on the job site under the RFM product lines such as Cleaver Brooks, Vapor Power, Camus, Industrial Combustion, and others. Performs other related duties as required and assigned. Essential Functions: The following reflects management’s definition of essential functions for this job but does not restrict the tasks that may be assigned. Management may assign or reassign duties and responsibilities to this job at any time due to reasonable accommodation or other reasons. • Must be willing to attend trainings for boiler pressure vessel welders as the schedule permits. Will keep the adequate personnel informed of ongoing tasks and problems with new and existing projects., • In general will do what it takes to make our company successful with the product lines we represent and the customers we serve. It is expected that this effort will complement and result in high quality build out and repairs of Skid Projects and the repair/installation of Boiler accessories and repairs., • Ability to work extended hours including nights and weekends as needed., • Will understand the requirements of ASME Code repairs and its impact on estimating, inspections, welding procedures and material control., • Will attend all required bi-monthly safety meetings and training as requested., • Must have good communication skills and the ability to work in a team atmosphere., • Must be certified in the 6G welding position and able to be certified as an employee of our company., • Opening and inspection of boilers, with the understanding of the design and construction., • Cleaning of the fire and watersides along with installing new gaskets. Performing refractory repairs and replacement., • Capable of reading and understanding mechanical drawings. Along with the ability to make modifications to the equipment per these drawings., • Capable of pipe fitting to ASME, state and local codes., • Evaluate basic boiler room systems (steam and hydronic), gather information and help solve problems., • Must be detail oriented in completing work orders, all required forms, summaries, and checklist daily or as required in procedures manual. Requirements: 1. Must have strong Communication skills, 2. Proficient in communications both verbal and written, 3. Interpersonal Skills, 4. Safety Focus, 5. Critical Thinking/Evaluation, 6. Reasoning skills, 7. Ethical conduct & practices, 8. Time Management, 9. Personal Effectiveness/Credibility, 10. Flexibility, 11. Timeliness, 12. Initiative, 13. Change Agent Competencies • Must have strong language skills as well as industry specific vocabulary., • Basic mathematics, algebra, and formula knowledge are required., • Must have very strong reasoning and problem solving skills., • A valid driver's license is required. Must be insurable with no major infractions. Job will require some travel., • Must be a team player., • Must be able and willing to work the hours necessary to fulfill the needs and expectations of the position and our customers., • Must have the ability to provide some ASME boiler code application support as needed on the various boilers, • Must display a willingness to learn, and to expand in the position. ·, • Must be very detailed in paperwork. ·, • Must have scheduling skills.·, • Must have some computer skills.·, • Other duties assigned. Supervisory Responsibility This position has no direct supervisory responsibilities. Work Environment This job operates in internal and external environments which may include inclement weather conditions. Environment will or can include working with hot steam, liquids tight spaces and other conditions. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk, hear, listen, bend, squat, walk, lift, pull, push, crawl, climb stairs and operate various equipment. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 6:00 a.m. to 2:30 p.m. This position regularly requires long hours, weekends and occasional travel work as job duties demand. Required Education and Experience · Position requires 5-10 years’ experience in the industry. · Completed High School diploma or equivalent · Two years of technical school, community college or trade school · Computer knowledge a plus. · Basic mathematics, algebra and formula knowledge are required. Preferred Education and Experience · Position requires 5-10 years’ experience in the industry. · Required: High school Diploma · Desired: AA/BA/BS/MA degree in XX or related field, or X years related experience. · Experience with Low Emission burners and related equipment is a plus. Other duties: Please note, this job description is not a comprehensive listing of activities, duties or responsibility that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job DescriptionReports to the Sales Manager Qualifications Education High school diploma or the equivalent. Licenses Driver's License Sales License Other Ability to read and comprehend instructions and information. Professional personal appearance. Excellent communication skills. Ability to meet company's production and quality standards. Physical Requirements Surroundings spend time outdoors in the weather and elements. spend time indoors in air-conditioned areas. Sitting on a regular basis Standing on a regular basis Walking on a regular basis Bending, twisting and/or stooping infrequently on a regular basis Kneeling and/or Squatting infrequently Lifting 25 lbs to 50 lbs infrequently Reaching and/or lifting overhead infrequently Climbing stairs Repetitive hand/finger movement on a regular basis Grasping/grabbing with hands infrequently Pushing and Pulling infrequently Expectations General Expectations Devote himself/herself to insuring satisfaction to customers. Determine management, production and quality requirements by asking questions and listening. Attend company meetings as required. Maintain a follow-up system that encourages follow through with assigned projects. Establish personal performance goals that are consistent with company standards of productivity and devise a strategy to meet those goals. Review and analyze actions at the end of each day, week, month, and year to determine how to better utilize time and plans more effectively. Understand the terminology of the business and keep abreast of technology changes in products and services. Know and understand the federal, state and local requirements which govern the company’s business. Follow lawful directions from supervisors. Understand and follow work rules and procedures. Participate in performance management. Interact well with others and be a positive influence on employee morale. Uphold the company’s non-disclosure and confidentiality policies and agreements. Work evening, weekend and holiday work hours as required. Job-Specific Expectations Be directly responsible for selling vehicles at dealership gross profit, volume and customer satisfaction standards, as set at the sole discretion of the dealership. Coordinate with the sales manager to set and meet new and used sales quotas. Meet the profit margin goals for vehicle sales. Be polite and friendly and greet customers promptly. Consistently follow the outlined sales process. Utilize floor time effectively in meeting the customers needs and soliciting sales. Determine each customer’s vehicle needs by asking questions and listening. Demonstrate and test drive vehicles. Verify that customers are qualified for their wants, needs, and ability to buy. Maintain current knowledge and familiarity with new products, features, accessories, etc., and their benefits to customers. Maintain an owner follow-up system that encourages repeat and referral business and contributes to customer satisfaction. Understand the terminology of the automobile business and keep abreast of technology changes in the product. Perform pre-delivery inspection and road test before delivery to customer. Deliver vehicles to customers after purchase. This process ensures that the customer understands the vehicle’s operating features, warranty and paperwork, and it lays the foundation for customer loyalty. Utilize the delivery of any new or used vehicle to create an event that will facilitate customer loyalty to the dealership.Understand equity and values, and be able to explain depreciation to customer. Conduct telephone transactions courteously and promptly. Utilize a consistent quotation process for purchases, trade-ins, and vehicle sales. Move and arrange display vehicles on showroom and on lot as directed by management. Deal with customer complaints in a sensible manner by showing empathy and a pleasant attitude to show our commitment to excellent customer service and to increase customer satisfaction and loyalty. Know and understand the federal, state and local laws which govern retail auto sales Attend pertinent training and stay current with with sales department concerns and sales techniques. Attend sales meetings. This is not necessarily an exhaustive list of responsibilities, skills, duties, requirements, efforts, or working conditions associated with the job. While this list is intended to be an accurate reflection of the current job, the Dealership reserves the right to revise the functions and duties of the job or to require that additional or different tasks be performed when circumstances change (i.e., emergencies, changes in personnel, work load, rush jobs, technological developments, etc...).

Job DescriptionNON-CDL Box Truck Owner-Operator (OTR)$6,000 – $8,000 Weekly Gross | No Forced Dispatch | Nationwide Freight We are currently partnering with experienced Non-CDL 24’ and 26’ Box Truck Owner-Operators who are ready to run OTR and maximize their weekly revenue. If you’re looking for consistent freight, transparent rates, and full operational support, we want to work with you. Compensation Weekly gross: $6,000 – $8,000 (solo) Top performers can exceed $8,500+ per week No factoring fees No forced dispatch No hidden deductions Transparent rate confirmations Competitive load rates Consistent freight availability Freight & Schedule OTR loads across all 48 states General freight (mostly no-touch) Typically 2–3 weeks out Bi-weekly home time Dedicated dispatch team focused on maximizing your revenue 24/7 dispatch support 24/7 ELD and safety assistance Support & Partnership Benefits Onboarding completed in as little as 24 hours Option to run under our MC authority or your own Fuel card program with $0.30 per gallon discount Sign-on bonus available Clean DOT inspection bonus Assistance with obtaining your own MC authority if needed Experienced back-office team handling paperwork and compliance so you can stay on the road Requirements 24’ or 26’ box truck (2013 model year or newer) Minimum 6 months of verifiable OTR experience Valid standard driver’s license (Non-CDL) No more than 1 moving violation in the past 2 years Professional attitude and strong commitment to safety Info: 872-259-1406 If you are a motivated owner-operator ready for steady OTR freight and strong weekly revenue, apply today to learn more about available routes.

Job Description Hiring CDL Class A OTR Rent - New Semi Trucks SAP Friendly Net $2,500+ a week! Loads & Equipment: • 2024–2026 Trucks • Volvo • Freightliner Fully Equipped: Microwave, Fridge, Inverter, APU • Trailer: 2022+ Dry Van trailer, • Speed: 70mph, • Running area: OTR, • Home Time: 2-3 weeks out, 4 days home, • Dry Van No Touch Freight, all miles paid empty and loaded, with an avg weekly 3500+ miles Pay & Benefits Owner-Operator Position Rent&Lease: • 88% of Gross, • $8.000 - $11.000, • Referral Bonuses, • Cash Advances, • 1099 Position, • DOT Inspection Bonuses, • No Forced Dispatch, • Unlimited Miles – You Decide How Far You Go, • 1-Day Orientation – Fast Start, • 24/7 support - dispatch and maintenance, • Quick Pay - Getting paid after every 48 hours Company Driver Position: • 70 CPM all miles paid - empty and loaded, • 3500 miles average Requirements: • 2+ Years Verifiable CDL A Experience, • Willing to Stay on the Road at Least 3 Weeks, • No Major Violations / No DUI, • SAP Friendly, • For any info, you can reach our team: (872) 259-1406

Job Description Revivn is a profitable and rapidly growing company that helps enterprises manage their technology through our end of life software platform. We take electronic recycling one step further by repurposing hardware that still has remaining life and providing it to people who lack dedicated computer access and make it more affordable for people who may not be able to purchase new technology. Working with companies like Instacart, Lyft, Qualtrics, X, Gensler, and Spotify, we are changing the way companies view used technology with a new model that focuses on repurposing instead of recycling. As a Driver at Revivn, you'll play a critical role in our mission to give new life to old technology. This position is much more than driving—you're one of the primary faces of Revivn, providing white glove service to our customers while ensuring the secure collection, transportation, and handling of enterprise IT assets. You'll operate a 26-foot box truck to complete scheduled pickups throughout the Fresno area and surrounding regions, averaging 7-10 collection trips each week. You'll regularly interact with building management, security personnel, and client representatives to coordinate pickups, maintain chain of custody, and deliver an exceptional customer experience. When you're not on the road, you'll support warehouse and facilities operations by receiving and processing incoming hardware, preparing equipment for future pickups, maintaining inventory accuracy, and contributing to the overall efficiency of our operations. This is an in-person position based in Fresno, California. The schedule is Monday through Friday, 7:30am-4:00pm. Responsibilities • Safely operate 26-foot box trucks to transport IT equipment throughout the Fresno area and regional locations., • Coordinate and execute white glove pickups of enterprise IT equipment from customer offices, data centers, and commercial buildings., • Serve as a professional representative of Revivn during every customer interaction, demonstrating excellent communication, professionalism, and sound judgment., • Load, unload, secure, and transport unboxed electronics and other technology equipment while maintaining chain of custody and protecting customer assets., • Assist with inventory tracking, including scanning, documenting, and accurately processing hardware as required., • Support facilities operations, including equipment cleaning, hardware processing, and maintaining an organized warehouse., • Help maintain inventory accuracy and prepare materials for shipment or customer collection., • Follow all DOT regulations, company safety procedures, and vehicle inspection requirements. Schedule & Travel Expectations This position is primarily scheduled Monday through Friday from 7:30am to 4:00pm; however, flexibility is essential to meet customer pickup schedules. • Overtime is regularly available and expected based on business needs., • Some pickup routes require an earlier start time than the standard schedule., • Regional trips may involve extended workdays, with drivers typically returning by or before 7:00pm., • Occasional travel throughout Central California, Greater Los Angeles Area, the Bay Area, and surrounding regions is required., • Candidates should be comfortable with varying daily schedules while maintaining a high level of professionalism and customer service throughout each trip. What We're Looking For • Valid driver's license with a clean driving record., • Minimum of 2 years of experience operating commercial vehicles, including box trucks (up to 26 feet) or larger., • Comfortable driving throughout Fresno, the greater Bay Area, and regional destinations., • Strong customer service and communication skills with the ability to interact professionally with clients, building management, and security personnel., • Experience working in customer-facing environments while representing an organization professionally., • Ability to safely lift, move, and transport equipment weighing 50 pounds or more., • Comfortable standing, walking, bending, and performing physical work throughout the day., • Strong attention to detail with the ability to accurately handle inventory and follow operational processes., • Self-motivated, dependable, and able to work independently with minimal supervision., • Working knowledge of DOT rules and regulations. If this sounds like you, apply! If you don't meet all of the qualifications but think you could be a match, we'd still love the chance to review your application. We embrace diversity and are committed to fostering an inclusive environment. At Revivn, we encourage people from all ages, abilities, and experiences to apply. Revivn does not discriminate on the basis of race, color, ancestry, religion, national origin, sexual orientation, age, citizenship, marital or family status, disability, gender, gender identity or expression, pregnancy or caregiver status, veteran status, or any other legally protected status. The salary for a Driver and Facilities Associate is $23-27/hr. Actual compensation packages are based on several factors that are unique to each specific candidate; including but not limited to skill set, depth of experience, applicable certifications, and geographic work location. This may vary depending on living location and market rate.

Job DescriptionReports to the Sales Manager Qualifications Education High school diploma or the equivalent. Licenses Driver's License Sales License Other Ability to read and comprehend instructions and information. Professional personal appearance. Excellent communication skills. Ability to meet company's production and quality standards. Physical Requirements Surroundings spend time outdoors in the weather and elements. spend time indoors in air-conditioned areas. Sitting on a regular basis Standing on a regular basis Walking on a regular basis Bending, twisting and/or stooping infrequently on a regular basis Kneeling and/or Squatting infrequently Lifting 25 lbs to 50 lbs infrequently Reaching and/or lifting overhead infrequently Climbing stairs Repetitive hand/finger movement on a regular basis Grasping/grabbing with hands infrequently Pushing and Pulling infrequently Expectations General Expectations Devote himself/herself to insuring satisfaction to customers. Determine management, production and quality requirements by asking questions and listening. Attend company meetings as required. Maintain a follow-up system that encourages follow through with assigned projects. Establish personal performance goals that are consistent with company standards of productivity and devise a strategy to meet those goals. Review and analyze actions at the end of each day, week, month, and year to determine how to better utilize time and plans more effectively. Understand the terminology of the business and keep abreast of technology changes in products and services. Know and understand the federal, state and local requirements which govern the company’s business. Follow lawful directions from supervisors. Understand and follow work rules and procedures. Participate in performance management. Interact well with others and be a positive influence on employee morale. Uphold the company’s non-disclosure and confidentiality policies and agreements. Work evening, weekend and holiday work hours as required. Job-Specific Expectations Be directly responsible for selling vehicles at dealership gross profit, volume and customer satisfaction standards, as set at the sole discretion of the dealership. Coordinate with the sales manager to set and meet new and used sales quotas. Meet the profit margin goals for vehicle sales. Be polite and friendly and greet customers promptly. Consistently follow the outlined sales process. Utilize floor time effectively in meeting the customers needs and soliciting sales. Determine each customer’s vehicle needs by asking questions and listening. Demonstrate and test drive vehicles. Verify that customers are qualified for their wants, needs, and ability to buy. Maintain current knowledge and familiarity with new products, features, accessories, etc., and their benefits to customers. Maintain an owner follow-up system that encourages repeat and referral business and contributes to customer satisfaction. Understand the terminology of the automobile business and keep abreast of technology changes in the product. Perform pre-delivery inspection and road test before delivery to customer. Deliver vehicles to customers after purchase. This process ensures that the customer understands the vehicle’s operating features, warranty and paperwork, and it lays the foundation for customer loyalty. Utilize the delivery of any new or used vehicle to create an event that will facilitate customer loyalty to the dealership.Understand equity and values, and be able to explain depreciation to customer. Conduct telephone transactions courteously and promptly. Utilize a consistent quotation process for purchases, trade-ins, and vehicle sales. Move and arrange display vehicles on showroom and on lot as directed by management. Deal with customer complaints in a sensible manner by showing empathy and a pleasant attitude to show our commitment to excellent customer service and to increase customer satisfaction and loyalty. Know and understand the federal, state and local laws which govern retail auto sales Attend pertinent training and stay current with with sales department concerns and sales techniques. Attend sales meetings. This is not necessarily an exhaustive list of responsibilities, skills, duties, requirements, efforts, or working conditions associated with the job. While this list is intended to be an accurate reflection of the current job, the Dealership reserves the right to revise the functions and duties of the job or to require that additional or different tasks be performed when circumstances change (i.e., emergencies, changes in personnel, work load, rush jobs, technological developments, etc...).

Overview: Goodguys Tire and Auto strives to create a family-like atmosphere for our team, and our customers. We have been servicing cars and assisting drivers since 1976 making us your best choice for tires and service in San Diego. For over 40 years, we have been helping the drivers of the San Diego area keep their cars on the road. Our service team has over 50 years of combined experience maintaining a variety of makes and models of cars and trucks. The General Service Technician is responsible for conducting non-technical automotive service repairs such as oil changes, tire and wheel related services as well as driving customers, picking up parts, and maintaining the cleanliness of the shop as needed. COMPENSATION: $17 to $20/Hr - DEPENDING UPON EXPERIENCE Benefits: • Competitive Bi-Weekly Pay, • Tuition Reimbursement, up to $3,000 annually, • Paid Vacation and Sick Time, • 6 Paid Holidays, • Medical, Dental and Vision Insurance, • Life Insurance (Company paid), • 401(k) Retirement Savings Plan with Company Match, • Discounted Services on Personal and Immediate Family Vehicles, • Opportunity for Advancement!!! Principal Duties and Responsibilities: • Performs tire mounting/dismounting, wheel balance and tire rotation., • Performs oil changes and other basic services at the direction of the Shop Manager or Store Manager., • While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Manager or Store Manager. Utilizes the company’s Multi-point Inspection and/or Repair Order to properly document the vehicle condition., • Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance., • Safely transports customers to and from their place of residence or business using the company vehicle., • Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle., • Operates company vehicle in a safe and courteous manner obeying all traffic laws., • Conducts State Safety and Emission Inspections on vehicles in an ethical manner following all company and state guidelines., • Follows all safety procedures and reports any concerns to the Shop Manager or Store Manager. The General Service Technician should also adhere to all company policies and procedures as outlined in the Employee Handbook. Qualifications: • High School Diploma or equivalent, • Must be at least 18 years old, • Possess current, valid driver’s license, • Possess current or expired State Inspector License or ability to obtain a State Inspector License within 30 days of hire date, • Possesses a general understanding of under the hood, mechanical and under carriage assemblies, • Ability to work Monday - Saturday Working Conditions and Physical Demands: The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The General Service Technician must be able to meet the following physical requirements: • Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building, • Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently, • Lift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently., • Hear and speak, • Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

The problem: Every minute matters in fire response. As climate change amplifies the intensity of wildfires—with longer fire seasons, dryer fuels, and faster winds—new ignitions spread faster and put more communities at risk. Today, most wildfires are detected by bystanders and reported via 911, meaning it can take hours to detect a fire, verify its exact location and size, and dispatch first responders. Fire authorities need a faster way to detect, confirm, and pinpoint fires so that they can quickly respond—preventing small flare-ups from becoming devastating infernos. About Pano: We are a 175+ person growth-stage hybrid-remote start-up, headquartered in San Francisco. We are the leader in early wildfire detection and intelligence, helping fire professionals respond to fires faster and more safely—with the right equipment, timely information, and enhanced coordination—so that they can stop a new ignition before it grows. Pano AI combines advanced hardware, software, and artificial intelligence into an easy-to-use, web-based platform. Leveraging a network of ultra-high-definition, 360-degree cameras atop high vantage points, as well as satellite and other data feeds, Pano AI produces a real-time picture of threats in a geographic region and delivers immediate, actionable intelligence. Pano AI has been recognized by Fast Company as one of the and as one of the —ranking #1 in the Sustainability category. The company was also named to list of the and identified by MIT Technology Review as one of the Pano AI has been featured in leading publications, including The and The company serves dozens of government and enterprise customers across 16 U.S. states, five Australian states, and British Columbia, Canada, and currently monitors more than 50 million acres of land worldwide. It has raised from investors including Giant Ventures, Liberty Mutual Ventures, Tokio Marine Future Fund, Congruent Ventures, Initialized Capital, Salesforce Ventures, and T-Mobile Ventures. Learn more at. We are looking for a Strategic Accounts Sales Manager / Senior Manager to lead our account growth and expansion organization. In this role, you will focus entirely on maximizing revenue retention and driving deep strategic partnerships within Pano's most valuable existing enterprise accounts. This is a dedicated revenue-growth position focused on unlocking significant expansion and upsell opportunities. You will directly manage a team of six account professionals, driving strategic commercial execution and scaling our footprint across critical infrastructure sectors—including Utilities (IOUs), Insurance, Energy, Data Centers, and Oil & Gas. Net Revenue Retention (NRR) Expansion: Own and execute the commercial strategy to aggressively scale revenue within Pano's existing enterprise account base. Forecasting & Revenue Predictability: Own an accurate, rolling revenue forecast across the strategic account portfolio—managing commit and best-case calls, driving predictability, and delivering against quarterly and annual expansion targets. Pipeline Inspection & Management: Run a disciplined cadence of pipeline inspection—ensuring opportunity hygiene, accurate stage progression, and sufficient pipeline coverage to hit NRR and net-new expansion goals. Deal Strategy & Account Planning: Inspect and coach complex, multi-year expansion opportunities; lead account and territory planning to systematically map whitespace, identify upsell and cross-sell paths, and prioritize the highest-value plays. Team Leadership: Manage, coach, and elevate a team of account professionals to achieve ambitious account expansion targets. Executive Engagement & Deal Support: Support your team in critical C-level discussions, complex deal structures, and high-stakes negotiations as needed—navigating multi-stakeholder corporate structures to establish executive partnerships and expand contract values. Cross-Functional Handoff: Partner with the New Business team to seamlessly transition newly acquired accounts into the expansion pipeline. Cross-Functional Partnership: Partner closely with Product, Customer Success, Marketing, and Deal Desk to remove friction from the expansion motion, surface customer needs, and ensure renewals and upsells are delivered seamlessly. Field Engagement: Travel up to 50% of the time to interface directly with key stakeholders and support your team on-site. Enterprise Expansion Track Record: Proven experience managing sales or account teams in a high-growth B2B environment, with a measurable history of driving corporate account growth. Pure Management Experience: Multiple years of experience directly leading and developing enterprise account teams in a dedicated leadership capacity. Industrial Sector Acumen: Deep familiarity navigating the procurement, regulatory, or operational structures of utilities, energy companies, data centers, or the insurance sector. Willingness to Travel: Mobility and enthusiasm to travel up to 50% for high-impact customer engagements. Final compensation for full-time employees is determined by a variety of factors, including job-related qualifications, education, experience, skills, knowledge, and geographic location. In addition to base salary, full-time roles are eligible for stock options. Our benefits package also includes comprehensive medical, dental, and vision coverage, a matching 401(k) plan, and flexible paid time off.

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Utility Technician will operate various Class A, B, and/or C vehicles (pumper truck, P&D truck, fence truck, container truck, etc.) in support of the operation's needs Responsibilities: • Conducts daily pre-shift & post-shift vehicle inspection & report deficiencies to shop immediately., • Also, report improper operation, faulty equipment, and unusual conditions to the Operations. Manager., • Operates service truck to and from pre-designated work sites based on daily routing information., • Services portable restrooms, holding tanks, septic tanks, sinks, showers, etc., at various work sites by following the Company's servicing guidelines., • Notifies management of any issues encountered on back-up route assigned., • Maintains telephone or radio contact with dispatch to receive additional instructions, changes to work locations, etc., • Maintains truck log according to state and federal regulations., • Follow all established safety rules & regulations., • Operates flat bed truck to and from pre-designated work sites based on daily routing information to deliver or pick-up portable restroom units, hand sinks, holding tanks or containers., • Updates tickets with relevant delivery or pick-up detail., • Operates fence truck to and from pre-designated work sites based on daily routing information to deliver or pick-up fence (chain link, panel, materials, etc.), • Will also act as a lead on fence jobs where a crew is assigned to the job/truck and will operate fence installation equipment., • Operates tanker/transfer truck to and from local dump and completes required paperwork as necessary., • Special projects as assigned by management. Qualifications:, • Minimum two years of commercial driving experience., • Valid Driver License (CDL or non-commercial)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision-making skills. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Push 100lbs and pull 100lbs horizontally Benefit Summary: All full-time employees working an average of 30 hours or more per week are eligible for the following benefits: • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: – / hour EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Attentive® is the AI marketing platform for 1:1 personalization redefining the way brands and people connect. We’re the only marketing platform that combines powerful technology with human expertise to build authentic customer relationships. By unifying SMS, RCS, email, and push notifications, our AI-powered personalization engine delivers bespoke experiences that drive performance, revenue, and loyalty through real-time behavioral insights. Recognized as the #1 provider in SMS Marketing by G2, Attentive partners with more than 8,000 customers across 70+ industries. Leading global brands like Crate and Barrel, Urban Outfitters, and Carter’s work with us to enable billions of interactions that power tens of billions in revenue for our customers. With a distributed global workforce and employee hubs in New York City, San Francisco, London, and Sydney, Attentive’s team has been consistently recognized for its performance and culture. We’re proud to be included in (four years running!), , (five years running!), and . About the RoleAs the Director of Customer Success Operations at Attentive, you will lead and optimize the rhythm around revenue and retention performance for our Customer Success team. This role reports to the VP of Revenue Operations, partnering closely with CS Leadership. You will own the cadence, forecasting rigor, segmentation and capacity model, and data integrity required to run the CS business with clarity and accountability. You’ll combine strategic thinking with hands-on operational leadership–building scalable processes, delivering actionable insights, and ensuring our teams have the goals, tools, and customer health signal infrastructure to proactively reduce churn and accelerate growth. • CS Quota & Goal-Setting: Own the end-to-end annual and quarterly goal-setting process for CS (retention/renewals and expansion, as applicable), including target methodology, goal allocation, and ongoing calibration in partnership with CS Leadership, RevOps, and Finance, • Renewals Forecasting & Model Operations: Build and run a high-rigor renewals forecasting operating rhythm—owning the renewal forecast model, inspection cadence, risk taxonomy, and early-warning mechanisms to improve predictability and drive proactive intervention, • Customer Revenue Model & Operations: Own the underlying customer revenue operating model (what renews when, where risk sits, what drives NDR/GRR outcomes) and translate it into clear operating mechanisms, dashboards, and processes that CS teams can run weekly, • Post-Sale Performance Insights: Deliver clear performance storytelling for the CS organization—drivers of churn/retention/expansion, cohort trends, and recommended actions—and partner with CS Leadership to turn insights into execution, • Customer Segmentation & Territory / Book Management: Define and maintain customer segmentation and book-of-business management principles; partner with CS Leadership to align coverage models to customer needs and business goals, • CS Capacity Planning: Own CS capacity and coverage planning (ratios, book sizing, ramp assumptions, workload drivers) and translate it into hiring/coverage recommendations in partnership with CS Leadership and FP&A, • CS Data Integrity & Operating Hygiene: Own post-sale data integrity standards (definitions, required fields, lifecycle stages) and enforce operating hygiene so forecasting, reporting, and workflows are reliable and scalable, • Team Leadership & Development: Lead a team of 5, defining the right org structure and assessing current coverage and operating mode. Build an enablement and quality bar that scales with the business, • Proven experience (8+ years) in Revenue Operations, Business Analytics, or related roles, preferably in a B2B SaaS company, • Excellent analytical skills, with the ability to analyze complex data sets and market dynamics, • Exceptional communication and presentation skills, with the ability to effectively articulate complex concepts, • Strong understanding of SaaS business models, go-to-market strategies, and customer success processes, • Demonstrated success in leading teams and driving cross-functional alignment across multiple stakeholders across all levels, • Strong leadership capabilities, with experience in building and developing high-performing teamsYou'll get competitive _, from health & wellness to equity, to help you bring your best self to work. US based applicants:- The US base salary range for this full-time position is $190,000-$240,000 annually + equity + benefits- Our salary ranges are determined by role, level and location #LI-AR1 Attentive Company ValuesDefault to Action - Move swiftly and with purposeBe One Unstoppable Team - Rally as each other’s championsChampion the Customer - Our success is defined by our customers' successAct Like an Owner - Take responsibility for Attentive’s success Learn more about _, Attentive’s collective of employee resource groups. If you do not meet all the requirements listed here, we still encourage you to apply! No job description is perfect, and we may also have another opportunity that closely matches your skills and experience. At Attentive, we know that our Company's strength lies in the diversity of our employees. Attentive is an Equal Opportunity Employer and we welcome applicants from all backgrounds. Our policy is to provide equal employment opportunities for all employees, applicants and covered individuals regardless of protected characteristics. We prioritize and maintain a fair, inclusive and equitable workplace free from discrimination, harassment, and retaliation. Attentive is also committed to providing reasonable accommodations for candidates with disabilities. If you need any assistance or reasonable accommodations, please let your recruiter know.

Overview esVolta, LP is a leading developer, owner, and operator of utility-scale energy storage projects across North America. We are at the forefront of the fast-growing battery energy storage market, and our projects are helping to transition the nation’s electric grid to a cleaner and more reliable future. Our storage projects provide major utilities with a multitude of important services including reliable fast-ramping capacity, energy and ancillary grid services including renewable energy integration support. esVolta is independently owned, and we are among the largest players in the US energy storage sector with about 2.0 GWh of projects in operation or construction, and a 25+ GWh development pipeline. We are headquartered in Newport Beach, California, with employees in multiple regions across the U.S. Our diverse management team has many decades of experience in the renewable energy, utility, and independent power sectors. esVolta is an innovative industry leader in development, design, construction, financing, and management of utility scale energy storage projects. At esVolta, every employee makes an impact on the company’s growth and profitability, every day. We have a fast-paced, high-performance and team-oriented culture. We value quality of life and flexibility for our employees and strive to help our team members achieve their career goals. About The Role We are seeking motivated and energetic individuals to join as a Project Engineer to support the construction of several sequential utility-scale battery energy storage projects from late-stage development through commissioning. The Project Engineer is the primary technical point of contact for esVolta, vendors, and the internal project team. The role is to be the liaison between the EPC contractor’s engineering team, owners, engineers and the esVolta EPC (project, commissioning and engineering) team. This position is responsible for ensuring the timely completion of project deliverables that may include civil, structural, mechanical, instrumentation and electrical. Core Responsibilities • Assist management team in completing engineering projects by organizing and overseeing project engineering activities during pre-construction and construction., • Support project objectives by reviewing project engineering proposals and design documents and conferring with engineering management and project management during pre-construction and construction., • Responsible for maintaining an engineering issues log, RFI log and submittal log during project execution, and identifying project responsibilities and assigning personnel to tasks with definitive due dates., • Responsible for reviewing all product and project design specifications by studying product/major material design, customer requirements, and performance standards and ensuring compliance with company design standards., • Collaborate with project manager and construction manager on project schedule by studying execution plan and schedule to insure feasibility with engineering activities and specifications., • Responsible for reviewing manufacturers’ specifications to determine extent of scope for multiple disciplines of the project and ensuring design documentation and construction documentation are consistent., • Responsible for reviewing and recommending engineering expenditures to management for approval during project execution., • Participate in regular project team meetings to ensure specific engineering requirements are being met on a timely basis., • Responsible for preparing project engineering status reports on a weekly basis by collecting, analyzing, and summarizing information and recommending actions., • Responsible for ensuring project design is in compliance with federal, state and local regulations., • Complete technical studies, such as load flow, fault current calculation, arc flash analysis, device coordination, motor starting and harmonic studies using ETAP and SKM and prepare cost estimates as directed., • Facilitate preparation of design criteria, specifications, datasheets, One-Line diagrams and elementaries for electrical equipment such as PV panels, inverters, trackers, transformers, • Maintain project engineering budgets and collaborate with project manager on overall project budget., • Track performance and analyze the completion of key goals during project execution. Maintain production logs for work put in place for future reference for project engineering lessons learned., • Support the inventory and inspection process as major materials arrive to site: inspection, offload, receiving, and storage.Quality Assurance, • Responsible for verifying that project execution during construction agrees with all IFC design drawings., • Assists third party/IE partners in confirming product performance by meeting with them during site visits and overseeing tests., • Document control including management of all IFC and Redlined esVolta prints, manufacturer and as-built drawings., • Support the final inspections and punch list process with contractors, vendors, independent engineers and management.Safety, • Assist project management and HSE team in developing and executing site specific safety program and activities., • Monitor and review trade partner work plans and activities for safety concerns., • Participate in and contribute to project planning and hazard analysis., • Maintains safe and clean working environment by enforcing procedures, rules, and regulations., • Maintain operational knowledge of construction safety, OSHA, ANSI, NFPA, and other applicable standards, regulations, laws, and procedures., • Serve as resource for safety issues or concerns for all project team members. Skills & Qualifications • 3 years of experience in electrical engineering, power delivery, substation, transmission line, interconnect, renewable energy or energy storage is required., • ABET accredited bachelor’s degree in electrical engineering or related field is required. EIT Certification preferred., • Familiarity with applicable standards including IBC, NFPA 855, CEC, CFC, IEEE, NEMA, NEC, OSHA, and UL., • Familiarity with battery energy storage design and technical standards preferred., • Strong proficiency with Microsoft Word and Excel, Primavera, Microsoft Project, and Smartsheets., • Superior communication and presentation skills, both written and verbal., • Outstanding interpersonal skills, including an ability to maintain calm and effective exchanges by all parties during stressful situations, and executive level reporting that ensures timely action and decision making in time-pressured scenarios. Compensation, Location & Benefits The salary offered will depend on the specific skills and experience of the selected candidate. This position is also eligible to participate in our annual bonus program. $120,00020% • 401k program with 6% match, • 20 vacation days, 5 sick days and 9 observed holidays, • Medical, dental and vision care benefits, • Monthly cell phone stipendThis position is classified as remote; however, periodic travel to company offices, project sites or other meeting locations may be required on an as-needed basis. esVolta is an Equal Opportunity Employer. We celebrate all forms of diversity and are committed to creating an inclusive environment for all employees. However you identify or whatever your path here, we encourage you to apply. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the hiring process, perform essential job functions, and receive other benefits and privileges of employment.

Job Description JOB REQUIREMENT SUMMARY: Proper completion of all front office duties. Complete the activities of Night Shift staff. Effectively, properly, and accurately analyze the days operating results and perform daily assigned duties including: • Conduct the Night Audit in accordance with the SOCH standards, • Operations Analysis & Reporting: o Accounts Payable o Accounts Receivable and direct billing o End of day statistics o Labor Productivity o Daily Flash Report o Credit Check/Balance Batch Settlements o Operations statistics report – labor cost/room, etc. Ensure the proper appearance of the lobby and all public areas, including the complimentary breakfast area. Act as the Manager on Duty (MOD). QUALIFICATION STANDARDS: Education & Experience: High School diploma equivalent required. 1 year Hotel front office experience with a minimum of 1 year as Night Experience preferred. Computer experience required. Customer services experience preferred. Must work the Night shift. General Requirements: Effectively communicate both verbally and written, with all levels of employees and guests in an attentive, friendly, courteous, and service oriented manner. Must be able to work with and understand financial information and data, and basic arithmetic functions. Must be able to multitask and prioritize departmental functions to meet deadlines. Approach all encounters with guests and employees in an attentive, friendly, courteous, and service-oriented manner. Attend all hotel required meetings and trainings. Maintain regular attendance in compliance with Soch Standards, as required by scheduling. Maintain high standards of personal appearance and grooming, which includes wearing the proper uniform and nametag. Comply with Soch Standards and regulations to encourage safe and efficient hotel operations. Maximize efforts towards productivity, identify problem areas and assist in implementing solutions. Must be able to understand and apply complex information, data, etc. from various sources to meet appropriate objectives. Must be able to cross-train in other hotel related areas. Must be able to maintain confidentiality of information. Must be able to show initiative, including anticipating guest or operational needs. Perform other duties as requested by management. Willing to work on weekends and holidays as required. Always maintain a warm and friendly demeanor. Physical requirements: Ability to stand during entire shift. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently or constantly to lift, carry, push, pull or otherwise move objects. Long hours and flexibility occasionally required. RESPONSIBILITIES & FUNCTIONS: Primary Functions: Accounting: • Properly and accurately conduct the audit and accounting functions in a timely manner and transmit the information to the corporate office. • Prepare and transmit the payroll information and statistics., • Prepare and distribute the Daily Flash Report Profit: • Prepare and distribute the daily cost per occupied room (CPOR) data and statistics. Quality: • Compile and enter the data from the Front Office Room Inspection forms., • Perform the regular Front Office duties. Work Ethic: • Demonstrate a high level of integrity, take ownership of personal and team actions, communicate effectively, nurture a positive, professional work environment, and adhere to SOCH’s Standard Operating Procedures.

As a member of the ShipBob Team, you will... • Grow with an Ownership Mindset: We champion continuous learning and innovation. You'll take on real problems, create tangible solutions, and drive results that move the needle for ShipBob, our merchants, and for your own professional growth. If you're ready to do the most meaningful work of your career, this is the place., • Collaborate with Peers and Leaders Alike: At ShipBob, leaders are accessible; feedback flows in both directions, and everyone, regardless of their seniority or role, steps up to help when needed. We hold each other to high standards because we trust each other to meet them. That combination of transparency and mutual respect is what makes the work here feel worth doing., • Experience a High-Performance Culture and Clear Purpose: We are results-driven and clear about what that means: our goals are specific, accountability is shared, and every team member can see how their work connects to our mission. When we hit milestones, we celebrate them together. When we fall short, we learn and move forward. Location: Remote in these states: AL, AZ, CA, CO, FL, GA, KS, KY, IA, ID, IL, IN, LA, MA, ME, MI, MN, MO, NC, NH, NJ, NV, NY, OH, OK, OR, PA, RI, SC, TN, TX, UT, VA, VT, WA, WI Role Description: As a Senior AI Product Builder – FC Automation at ShipBob, you own the full build loop for Automation Product and Strategy — defining how ShipBob's WMS integrates with automation hardware to lift productivity and quality across the fulfillment network, and shipping the WMS-side product, integrations, and workflows that turn that strategy into operating reality. You own the full build loop for this domain: discovery, story/specs, AI-augmented prototypes, and production-ready PRs. This is not the traditional PM role — you are a builder and an automation strategist. You use the AI development toolchain (e.g., Claude Code, Driver.ai) to understand ShipBob's codebase architecture, generate working code against the actual repo, and ship to production with minimum engineering rework. The minimum technical floor for this role is real: you must read ShipBob's data model, evaluate AI-generated scaffolding for correctness, identify which manual workflows are ready for automation, and write story/specs precise enough that AI tools can act on them without follow-up questions. This role is for someone energized by speed, uncomfortable with waste, and who measures success by outcomes shipped — not documents approved. You will set the automation strategy for your domain — evaluating automation hardware options, deciding which are the right fit for ShipBob, and shipping the WMS integrations, workflows, and operator experience that make them productive on the floor. As ShipBob embraces new automation technologies, you are the person turning that strategy into measurable productivity and quality gains. You operate in an AI-native pod alongside an AI Engineer, AI/Prompt Engineer, and Designer. This role reports to a Director, AI Product Builder. What you'll do: • Own the full product loop independently: AI-augmented discovery → story/spec → prototype → production PR → outcome measurement. You are accountable for the outcome, not just the handoff., • Independently conduct customer discovery and use AI tools to synthesize research across tickets, interviews, behavioral data, and competitive signals., • Demonstrate deep functional and technical knowledge of owned products end-to-end. Independently demo to merchants and partners; understand competitive landscape and key differentiators., • Use AI tools independently to analyze product metrics, identify usage patterns, and surface anomalies. Define success metrics and kill thresholds at spec time without coaching., • Maintain a prioritized automation roadmap ranked by impact × speed. Use AI tools to synthesize competitive intelligence, market trends, emerging warehouse automation capabilities, and customer insight into strategic inputs., • Identify the highest-leverage productivity and quality opportunities in ShipBob’s fulfillment operations. Evaluate automation hardware options, recommend the right strategic fit, and own the WMS-side product work that integrates them into the floor., • Independently evaluate whether a proposed solution fits ShipBob's architecture without Engineering translation. Understand service boundaries, data structures, and how merchant and partner API usage shapes data contracts., • Independently route changes through prototype-then-PR. Write clear story/specs and review AI-generated code before raising. PR promotion rate improves consistently., • Set experiment hypotheses with explicit kill thresholds. Make day-7 rollout/kill decisions on AI-surfaced data., • Additional duties and responsibilities as necessary. What you'll bring to the table: • 5+ years of product management, product engineering, or equivalent experience, with demonstrated hands-on AI tool usage in a professional context., • Proven ability to write story/specs that AI tools can act on directly — state machines, business rules, data contracts, edge cases — not narrative PRDs., • Technical fluency: can read a data model, evaluate an API contract, and identify when AI-generated code deviates from the target architecture., • Track record of shipping working prototypes or production code, not just Figma mocks or slide decks., • Strong outcome ownership: sets success metrics and kill thresholds at spec time and tracks them after launch., • Experience working in supply chain, fulfillment, logistics, transportation, or e-commerce technology., • Demonstrated experience shaping automation product strategy in a fulfillment, warehouse, or manufacturing context — selecting automation hardware, integrating it with a WMS or shop floor system, and shipping measurable productivity and quality gains., • Comfortable operating in a fail-fast culture. Being wrong fast is a feature here — staying slow to look right is the failure mode., • Excellent written communication: you write specs, not meeting notes. Nice to have: • Hands-on experience with the AI development toolchain (e.g., Claude Code, Driver.ai, Cursor, Replit, V0, Figma AI)., • Working knowledge of TypeScript, React, or Python — enough to debug AI-generated code and understand what the Engineer is reviewing., • Experience with warehouse management systems, order management, carrier integration, or fulfillment operations at scale., • Prior experience transitioning a product team from traditional SDLC to an AI-native operating model., • Working knowledge of warehouse automation hardware — person-to-goods, goods-to-person, AS/RS, robotics, sortation, conveyance, pick-to-light, palletization (robotic and semi-automated), computer vision (dimensioning, item recognition, quality inspection), and similar systems — and direct experience integrating automation hardware into a WMS to lift productivity and quality. ShipBob believes in transparency while providing a competitive total compensation package with a pay for performance approach. We are targeting a salary range of $151,080 - $251,800 for this role. The full base pay range for this position in our compensation architecture is $151,080 - $289,570. In addition to base salary, this role includes the opportunity to be eligible for participation in the Company's discretionary bonus plan based on Company's plans and in accordance with Company’s policies. Perks & Benefits: • Medical, Dental, Vision & Basic Life Insurance, • Paid Maternity/Parental Leave Program, • Paid Holidays & Flexible Time Off Program, • Paid Sick Leave, • Wellness Days (1 day/quarter), • 401K Match, • Comprehensive Benefits Package >>> _, • See Our High-Performing Culture >>> (@lifeatshipbob) We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. Diversity of experience and skills combined with passion is a key to innovation and excellence; therefore, we encourage people from all backgrounds to apply to our positions. About You: Building the world’s leading full-stack fulfillment platform is challenging work. The problems we solve are complex, the pace is fast, and the bar is high. That means ShipBob’s environment isn’t the right fit for everyone, and that’s okay. If you are ready to take ownership, push boundaries, and grow alongside a team that genuinely supports each other, we would love to hear from you. Learn more about our core values and how we perform at a high level in our day-to-day work on our Culture page (_). About Us: ShipBob is a leading global supply chain and fulfillment technology platform designed for SMB and Mid-Market ecommerce merchants to provide them access to best-in-class capabilities and to deliver a delightful shopper experience. Merchants can outsource their entire fulfillment operations, utilize ShipBob’s proprietary warehouse management system for in-house fulfillment, or take advantage of a hybrid solution across ShipBob’s dozens of fulfillment center network in the United States, Canada, United Kingdom, Europe, and Australia. ShipBob is backed by leading investors like Menlo Ventures, Bain Capital Ventures, Hyde Park Venture Partners, and SoftBank Vision Fund 2, and is one of the fastest-growing tech companies headquartered in Chicago. At ShipBob, every full-time employee gets access to our best-in-class AI and productivity tools from Day 1 at no cost. This isn't a pilot or a perk for select teams. It's standard for everyone. We believe innovation isn't owned by one department. Whether you're in Talent, Operations, Finance, Engineering, or Customer Success, we expect you to ask: how can this be done better, faster, or smarter? These tools are our investment in your ability to find those answers. We may use AI-powered tools during our interview process to support things like notetaking and organizing feedback so our teams can stay focused on getting to know you. These tools help create a more consistent and thoughtful experience. That said, every hiring decision is made by a human. ShipBob provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. There is no deadline to apply for this position, as ShipBob accepts applications on an ongoing basis.

ngrok is an all-in-one cloud networking platform that secures, transforms, and routes traffic to services running anywhere. Instead of cobbling together nginx, NLBs, VPNs, model routers, and oodles other tools, developers solve every networking problem with one gateway. Doesn’t matter if they’re sharing localhost or running AI workloads in production. We're trusted by more than 9 million developers at companies like GitHub, Okta, HashiCorp, and Twilio. What started as a way to put your local app on a public URL has grown into a universal gateway for API delivery, AI inference, device fleets, and site-to-site connectivity. It’s the same ngrok that millions of developers have loved and leaned on every day for years, now with the power to run production traffic at scale. A few things you should know: • Our mascot is a rock, • We are obsessed with our pets, Viper sunglasses and Bufo (yes, the toad), • We have a designated Chief Emoji Officer - they are vital to our success!, • We like software that’s serious and culture that’s not Most people skim to 'requirements' and bounce. You're actually reading this. That's the kind of thoroughness we respect, or you're just procrastinating. Either way, same same and you should keep reading. Our Customer Data team builds the systems that ensure customers see fair, clear billing and reliable consumption data. We handle billing, metering, limits, and usage tracking—the systems that make sure every byte is counted correctly and every invoice is accurate. Our systems must be correct, explainable, and defensible under real-world conditions: traffic spikes, partial failures, customers changing behavior mid-stream, and someone always asks: "Why does my bill look like this?" When things work, nobody notices. When they don't, suddenly everyone has opinions about distributed data systems. Is the bug due to caching? You'll be the one who actually knows. • Build the billing backbone: You'll maintain and evolve our billing and metering infrastructure—Stripe Orb integrations, usage aggregation systems, and everything that turns traffic into invoices. Accurate invoices. The kind customers don't dispute., • Track everything that matters: You'll build event tracking pipelines for traffic events, session logging, and usage patterns. You'll develop traffic inspection systems for compliance and analytics. Every request counted, every session tracked, no "lost" data explaining why the numbers don't match., • Own customer-visible usage and billing insights. Build and evolve the systems that turn raw product usage into clear, accurate, and trusted views of what customers are using and why they’re charged—eliminating billing confusion before it happens., • Handle the infrastructure details: You'll manage IP metadata services and the systems that connect traffic patterns to customer accounts. You'll ensure billing reliability—accurate invoices, automated refund processing, and reconciliation that actually reconciles., • Ship systems people trust: You'll work closely with product, platform, finance, and support. Finance will have questions. They always do. You'll make their day by actually having the data they need., • You’ve built backend or data-heavy systems that were held to high standards of correctness, • You’re comfortable in a statically typed, compiled language such as Go, Rust, C++, or Java (with bonus points for Go), • You’ve worked with event streams, usage data, or high-volume pipelines, • You enjoy thinking about data models, invariants, and failure modes, • You care about developer experience, including for people consuming your data, • You're the person people ping when the numbers don't add up and nobody else can explain why Extra credit if you’ve worked on: • Metering, billing, or pricing systems (but not limited to them), • Event-driven or streaming architectures, • Customer-facing analytics or usage reporting, • Systems where small discrepancies become large conversations ngrok runs entirely on AWS. Engineers develop by using remote development tools and/or ssh to connect to remote EC2 environments that run a full Kubernetes cluster of the ngrok stack, closely mirroring production. The codebase is primarily Go and TypeScript. We use Postgres for persistence, Kafka for streaming, Protobuf for service boundaries, and Kubernetes, Terraform, Helm, and Buildkite to operate and ship reliably. React is used for user interfaces, and GitHub supports our development workflows and remembers everything. This is a remote position for candidates outside of the Bay Area and a hybrid role for candidates within commuting distance to San Francisco. Our Bay Area employees commute to the office on Tuesdays and Wednesdays. All candidates must be US-based, and legally authorized to work in the United States. At this time, ngrok is unable to provide visa sponsorship for this position. Applicants must be authorized to work in the United States on a permanent, ongoing basis without the need for current or future sponsorship. Senior Software Engineer • Tier 1 (SF, LA, Seattle, NYC): $180,000 – $225,000, • Tier 2 (rest of US): $165,600 – $207,000 Software Engineer III • Tier 1 (SF, LA, Seattle, NYC): $160,000 – $200,000, • Tier 2 (rest of US): $147,200 – $184,000 Job level and actual compensation will be evaluated based on factors including, but not limited to, qualifications objectively assessed during the interview process (including skills and prior relevant experience, potential impact, and scope of role), internal equity with other team members, market data, and specific work location. We provide an attractive mix of salary and equity. #LI-Remote Compensation for this role depends on level, but we provide a competitive mix of salary and equity. We provide a 401(k) with a 100% match up to 3% of your salary and a 50% match up to another 2%. We provide healthcare, dental, and vision with premiums fully covered on the base plan for employees. Half of premiums are covered for dependents. We offer unlimited PTO and a culture in which the overwhelming majority of employees take more than four weeks. Your manager is also on the hook for encouraging you to do the same.

A beloved local landmark for over 150 years, White Barn Inn, Auberge Collection is synonymous with warm New England hospitality, rustic charm, and uncompromising attention to detail. Just a 90-minute drive north of Boston in the charming coastal town of Kennebunk, Maine, the 28-room property is renowned as one of the country’s most distinctive getaways offering supreme levels of quality, luxury, and gracious service. The hotel's four waterfront cottages and one-of-a-kind houseboat boast coastal views and access to White Barn Marina. Amenities include an outdoor infinity pool, coastal views, an award-winning spa, two restaurants, convenient access to fine shopping and art galleries in Kennebunkport, as well as a variety of experiences from bike riding to local apple orchards to traditional Maine lobster bakes. The White Barn Restaurant, a culinary legend, Forbes Five Star and AAA Five Diamond fine dining destination, offers seasonal, contemporary New England cuisine while the new Little Barn is a casual eatery highlighting the local Maine farmstead and fisheries to the table in flavorful, approachable dishes. In summer 2020, White Barn Inn unveiled a property-wide redesign led by New York-based _ that refreshed guest rooms and public spaces with playful contemporary touches and elements from local Maine purveyors. For more information: _ Follow White Barn Inn on and @WhiteBarnAuberge The Area Sales Coordinator assumes a pivotal role, providing support for the remote and on-site group sales team for The White Barn Inn, Mayflower, The Vanderbilt and Wildflower Farms. This role curates a seamless experience. As a guardian of operational excellence, the Area Sales Coordinator works in tandem with the systems coordinator and the leisure sales coordinator. Duties include the coordination of all daily needs required to assist the group sales managers and the area director of sales; including prospecting and qualifying group leads, managing Delphi bookings, advanced planning and preparation of site inspection and VIP visits, working in cooperation with the events team to host planning sites, working in cooperation with other departments, and assisting with pop-up site visits as needed. Face-to-face interactions with guests and staff and written communications with clients are primary job functions. Sales Representative Job Functions • Create contacts, accounts and bookings in Delphi., • Create expenses reports, trip reports and group invoices., • Create Amenities for upcoming clients, • Planning, preparation and hosting group site visits, which may include client entertainment. Sales Coordination • Assist sales team with Delphi accounts Lead Entry/bookings management, contracts, proposals, lead qualification, prospecting, expenses reports, trip reports, group invoicing, etc., • Assist with advanced sales trip planning and post-trip follow-up., • Monitor daily glitch reports for in-house groups, VIP clients and site guests on behalf of sales managers. Site Visits • Assist with site/VIP reservations, required site documentation and partner with reservations as needed., • Pre-planning and preparation for site visits and VIP stays in collaboration with sales managers., • Participate in planning sites in tandem with the events department as needed to assist with room shows., • Conduct site inspections when the sales manager is not on property or otherwise not available, • Meet/Greet group clients and VIPs upon arrival and departure., • 2 years experience as a sales/catering assistant, preferably with use of Delphi and Opera systems, • Excellent verbal, written, presentation, and interpersonal communications skills, • Strong attention to detail, ability to multi-task and manage time efficiently, • Demonstrated ability to work with and support cross-functional project teams About Auberge Collection Auberge Collection is a portfolio of extraordinary hotels, resorts, residences and private clubs. While each property is unique, all share a crafted approach to luxury and bring the soul of the locale to life through captivating design, exceptional cuisine, innovative wellbeing, and gracious yet unobtrusive service. With 30 one-of-a-kind hotels, resorts, and residences, Auberge invites guests to create unforgettable stories in some of the world’s most desirable destinations. For more information: _ Connect with Auberge Collection on , , , and @Auberge and #AlwaysAuberge About Friedkin Friedkin is a privately held family of global brands spanning automotive, entertainment, hospitality, investments, and sports. Founded in 1969 and headquartered in Houston, Texas, the company is led by Chief Executive Dan Friedkin, and united by a mission to build breakthrough brands that redefine the status quo. The Friedkin portfolio includes Gulf States Toyota, 30WEST, Accelerated Solutions Group, AS Roma, Ascent Automotive Group, Auberge Collection, Congaree, Copilot Capital, Diamond Creek, Everton Football Club, GSFSGroup, Imperative Entertainment, Legendary Expeditions, NEON, Northside Lexus, Pursuit Sports, The Friedkin Group International, USAL and Westside Lexus. For more information, please visit _ US Hotels New England LLC is an Equal Opportunity Employer, M/F/D/V. WBI Operations LLC provides equal employment opportunities (EEO) to all team members and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, WBI Operations LLC complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

For years, _ has been a trusted partner in providing world-class data center solutions. With a focus on sustainable, secure, and reliable infrastructure, Stream empowers businesses to scale their digital operations while prioritizing environmental and social responsibility. Stream Data Centers continues to set new standards for innovation, operational excellence, and sustainability in the data center industry, having provided premium data center services since 1999. Now, with 90% of its inventory leased to Fortune 100 customers, the company has acquired, developed and managed more than 27 data center projects nationally, while leadership has remained consistent for over two decades. From site selection to data center construction and operations, Stream develops wholesale colocation capacity and build-to-suit facilities for hyperscale and enterprise users in major markets across the United States. Additionally, Stream sources and develops low-risk land sites for optimum data center development and provides energy procurement services with a focus on reducing market risk and providing low-cost renewable energy options. POSITION OVERVIEW: Seasoned director-level leader to coordinate development, operations, maintenance and regulatory compliance for high-voltage infrastructure (transmission lines and substations). This role will lead cross-functional teams, serve as a key utility and stakeholder liaison, drive project delivery and ensure assets meet performance, safety and regulatory requirements. RESPONSIBILITIES: • Develops and executes company-wide program for delivery of high voltage infrastructure supporting scale data center campus developments. Includes strategic leadership and day-to-day coordination for planning, design, construction, operation and maintenance of high-voltage transmission lines and substations., • Serve as a key interface with investor-owned utilities, municipalities and cooperatives, RTO/ISOs, state utility commissions and other regulatory bodies; prepare and oversee filings, testimony and compliance materials., • Lead project portfolio management: scope, schedule, budget, risk mitigation, procurement, contractor oversight, safety procedures and quality assurance for multi-year capital and O&M programs., • Develop and implement asset management, inspection, testing, and emergency response programs specific to substation facilities and equipment., • Ensure compliance with NERC/CIP, FERC, state PSC/PUC requirements and applicable regional transmission planning rules; coordinate reliability studies and outage planning., • Support technical and commercial discussions and contractual negotiations with utilities, ISOs and transmission owners., • Drive continuous improvement initiatives: standardization, cost optimization, digital monitoring (SCADA/telemetry), asset health analytics and lifecycle planning., • Represent the organization in stakeholder meetings, permitting negotiations, landowner and community engagement when required., • Collaborate with Development and Design & Construction teams to provide oversight of high voltage infrastructure facilities construction and commissioning. MINUMUM QUALIFICATIONS: • Bachelor’s degree in Electrical Engineering, Power Systems, or related technical field. Master’s preferred., • 10+ years of progressively responsible experience in high-voltage transmission and substation engineering, operations or asset management, with at least 5 years in a leadership/director-level role., • Direct experience working for, with, or within an electric utility (preferred) or for an independent transmission developer/consultant with significant utility interaction., • Strong working knowledge of NERC reliability standards, FERC regulations, regional market rules (RTO/ISO) and state-level regulatory processes., • Proven experience managing large capital projects (>$10M), multi-discipline teams, contractors and third-party stakeholders., • Demonstrated success in regulatory filings, permitting processes, and presenting technical testimony or position statements to regulators., • Excellent communication, negotiation and stakeholder-management skills; comfortable interacting with executive leadership, regulators, utilities, contractors and community stakeholders., • Ability to travel up to 25% and work flexible hours during emergency response or critical project phases. PREFERRED QUALIFICATIONS: • Professional Engineer (PE) license or equivalent technical certification., • Experience with protection & control systems, relay coordination, SCADA/RTU, and HV testing practices., • Familiarity with right-of-way acquisition and landowner relations., • Strong financial acumen — budgeting, cost control and value engineering., • Experience implementing digital asset management, condition-based monitoring or predictive analytics., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Training & Development, • Work From Home, • Wellness Resources

Compensation/Benefits: • Base Salary, +Progressive Sales Commission Plan (12-16%), +Production Commission Plan (10%), • Potential 1st year earnings $60-$90,000+, • Company Vehicle, Company Phone, • Health, Dental, Vision, & Life Insurance • Paid Holidays • Paid Vacation and Personal Time • Retirement Plan with Employer Match Are you a Sales Professional with a hunter mentality? Our Outside Sales Representative position is the foundation for an amazing career. As an Outside Sales Representative with Orkin Pest Control, you will be provided the opportunity to grow your sales career and serve a vital need for your clients. Job Title: Outside Sales Representative; B2B Account Manager Company: Orkin Pest Control/Sawyer, Inc. Responsibilities: • Uphold our brand standards and service-oriented culture • Build strong relationships and create Orkin Clients for life • Prospect and develop new business in a designated territory, both B2B and B2C • Achieve sales performance objectives through prospecting new business and assigned leads • Develop a daily schedule of productive activity from creative sources and qualified leads • Schedule sales appointments and meet with potential clients to explain Orkin products and services • Conduct a thorough inspection of interior and exterior areas of potential client’s property • Serve as a problem solver for clients by utilizing the in-depth training provided to decide on the most efficient and best overall pest solution for each client’s needs • Make sales presentations to clients based on inspection and issues identified by addressing any questions, explaining the process and setting expectations • Grow the business by finding potential clients that both need and want our services and providing the correct solution to fill those needs and desires Qualifications: • Minimum of 3-years outside sales, B2B sales with proven track record • Associates degree required, Bachelors degree preferred • Required to live in designated/surrounding area (no more than 10 miles outside city limits), • Must be willing to travel., • Mastery of commonly used CRM software • High degree of professionalism with exceptional follow-up and organizational skills • Flexibility in a multi-managed working environment • Ambitious, results-driven, and not afraid of healthy competition • Resourceful and able to learn new products, services, and processes quickly • Strong team skills • Ability to write clear, concise communications: excellent grammar, spelling, and editing skills • Safely use a ladder • Lift and carry up to 50 pounds • Safely access crawl spaces, attics, rooftops, etc. • Ability to work in all types of weather and temperature conditions • Obtain and maintain required state licensing • Qualified candidates must pass a background check and drug screening

Consumer Edge is redefining consumer data analytics for the world’s leading investment firms and global brands. We deliver privacy-compliant, real-time intelligence on consumer spending across markets, helping clients make faster, smarter decisions with confidence. Our merchant-level benchmarks and differentiated datasets provide a true edge—and our commercial team is at the center of bringing that value to market. Consumer Edge is seeking a high-performing Business Development Manager to drive new logo growth across financial services accounts (investors using alternative data within hedge funds, asset managers, family offices, etc) in the North American region (NAMER). This is a strategic hunting role for a seller who knows how to build a market, prioritize a book of target accounts, create a robust pipeline through direct outreach, and convert opportunities into profitable, long-term client relationships. This person will be exceptional at strategic account planning, with a keen understanding of the competitive landscape and our products. They will use a structured approach to segment and prioritize prospects, map buying committees, identify triggers, and focus time on the highest-value opportunities. They will be highly effective at outbound prospecting, consistently securing meetings through their own efforts while also partnering closely with SDRs and Marketing to maximize campaign, event, and nurture-driven pipelines. Success in this role requires strong commercial judgment, a proactive operating cadence, and best-in-class sales execution across storytelling, discovery, negotiation, and closing. As the latest NAMER hire, this individual will play a critical role in shaping our regional growth strategy and establishing Consumer Edge as a trusted partner to the investment community as we further scale in both $1B+ investors and the long tail of investors below $1B and across new investor types in Family Offices and other firm types. Strategic Planning & Account Prioritization • Build and manage a focused book of target accounts, prioritizing prospects based on market opportunity, fit, urgency, and likelihood to convert., • Develop thoughtful account plans that map key stakeholders, buying processes, competitive dynamics, whitespace, and next best actions., • Use data, market intelligence, and disciplined pipeline reviews to allocate time and effort against the highest-potential opportunities., • Maintain a rigorous operating cadence around territory planning, pipeline inspection, and forecast accuracy. Outbound Prospecting & Pipeline Creation • Generate qualified meetings through proactive outbound activity including email, phone, LinkedIn, referrals, events, and other creative prospecting channels., • Own personal pipeline creation targets and consistently build sufficient early-stage pipelines to support quota attainment., • Create relevant outreach strategies and messaging tailored to investor workflows, market conditions, and Consumer Edge’s differentiated value proposition., • Convert market insight and trigger events into timely, high-quality prospecting plays. Internal Partnering with SDR & Marketing • Partner closely with SDRs to improve target account penetration, campaign follow-up, and meeting conversion., • Work with Marketing to translate territory priorities into campaigns, events, content activation, and outbound themes that generate meetings., • Be a part of shaping our GTM and Product, • Provide frontline feedback to help sharpen messaging, improve lead quality, and increase conversion across the funnel., • Collaborate cross-functionally with management, product, insights, solutions, and customer success to present a unified and high-impact commercial motion. Client Engagement, Storytelling & Sales Execution • Lead compelling discovery conversations that uncover client priorities, workflows, pain points, and evaluation criteria., • Deliver clear, persuasive storytelling that connects Consumer Edge’s data and insights to measurable client outcomes., • Run opportunities with strong deal control, including multithreading, objection handling, business case development, and stakeholder alignment., • Lead negotiations in partnership with internal stakeholders and close deals effectively while protecting long-term value., • Own newly won relationships during the first 12 months, including identifying cross-sell and upsell opportunities and setting the foundation for durable growth. Market Intelligence & Commercial Excellence • Maintain strong knowledge of the alternative data landscape, buy-side use cases, competitive positioning, and market developments across NAMER., • Capture and maintain high-quality CRM data, including account plans, opportunity progression, activity, and forecasts., • Ensure smooth post-sale transition to Client Success for a strong onboarding experience of new clients., • 4+ years of successful new business sales experience with a consistent track record of winning new logos and exceeding quotas., • 3+ years selling alternative data, data analytics, research, or adjacent solutions into financial services clients, ideally buy-side investors including hedge funds, asset managers, family offices, pension funds, etc., • Proven ability to build, prioritize, and execute against a target account book with strong account planning discipline., • Demonstrated success in self-sourced outbound prospecting and securing meetings through proactive outreach., • Strong experience partnering with SDR and Marketing teams to generate pipeline and improve conversion., • Excellent sales skills across discovery, storytelling, objection handling, negotiation, and closing., • Strong command of the full sales cycle, from prospecting through contract execution and early account growth., • Experience working in Salesforce performing CRM hygiene and applying forecast discipline as core parts of the role., • Strong understanding of the investment landscape and, ideally, an existing network within the institutional investor, financial services ecosystem., • Clear, concise written and verbal communication skills, with the ability to simplify complex data concepts for senior commercial and investment audiences., • High integrity, strong ownership mentality, and comfort operating in a fast-paced, “build-the-plane” environment. At Consumer Edge, you’ll join a high-performance team at the forefront of data-driven decision-making for the world’s leading investors and brands. You’ll have the opportunity to shape an important growth market, work alongside smart and ambitious colleagues, and directly influence how we scale internationally. We offer competitive compensation, commission upside, company equity, 401(k) matching, work-from-home flexibility, and subsidized health benefits. The annual base salary for this role is $110,000 - $140,000, depending on experience, plus commissions, company equity, 401(k) matching, work-from-home flexibility, and subsidized health benefits. Note: Consumer Edge is currently hiring employees who reside in the following states or in Washington, DC: CA, CO, CT, FL, ID, IL, LA, MA, MD, NC, NJ, NY, PA, RI, TN, TX, UT, VA, WA, WI. #LI-Remote #LI-DN

ON.energy is building the power infrastructure that makes the AI era possible. As AI demand surges past what the grid and traditional data centers can support, ON.energy provides a new class of power technology proven at gigawatt scale and trusted by the world’s leading cloud and AI companies. Our systems are already deployed across 2.5 GW of hyper-scale campuses, validated by top U.S. national labs, and certified for grid-safe operation by major utilities. With real products in the field, we’re scaling faster than the grid can, transforming power from a bottleneck into a competitive advantage for the companies building the future. Senior Electrical Specialist AI UPS — Mission-Critical Data Center Power & Energy Storage Location: Remote U.S. (with travel to active project sites across the U.S.) Travel Requirement: ~50%+ on average, with higher field deployment during active commissioning windows Position Type: Full-Time, Salaried (Exempt) + per diem eligible while traveling — Individual Contributor (no direct reports) Reports To: Senior Commissioning Manager ON.energy is building the power infrastructure that makes the AI era possible. As AI demand surges past what the grid and traditional data centers can support, ON.energy provides a new class of power technology proven at gigawatt scale and trusted by the world’s leading cloud and AI companies. Our systems are already deployed across 2.5 GW of hyper-scale campuses, validated by top U.S. national labs, and certified for grid-safe operation by major utilities. With real products in the field, we’re scaling faster than the grid can, transforming power from a bottleneck into a competitive advantage for the companies building the future. Overview The Senior Electrical Specialist serves as ON.energy’s qualifying master electrician of record in the State of Texas and the on-site electrical subject matter expert for AI UPS deployments at hyperscale data center campuses. Holding (and “hanging”) an active Texas Master Commercial Electrician license under ON.energy for the duration of employment is a core function of the role and a condition of hire. This is a high-travel, hands-on field role and an individual contributor position with no direct reports. The Specialist is the primary escalation path for electrical issues during commissioning — validating workmanship and code compliance, witnessing and signing off on key electrical tests, and driving issues to resolution with EPCs, AHJs, utilities, and OEMs on aggressive schedules. The ideal candidate brings deep field electrical experience and the authority to hold the line on safety and code compliance. Key Responsibilities License of Record & Electrical Authority • Serve as ON.energy’s qualifying master electrician of record in the State of Texas, holding (and “hanging”) your active Texas Master Commercial Electrician license under ON.energy for the duration of employment. This is a core function of the role and a condition of hire., • Act as the on-site electrical subject matter expert and primary escalation path for electrical issues that arise during the commissioning phase of ON.energy AI UPS deployments at hyperscale data center campuses., • Coach EPC field crews and ON.energy field staff on electrical safety, code compliance, and quality standards. This role carries technical authority and is the team’s electrical escalation point but does not include direct people-management responsibility. Field Inspection & Verification • Travel to project sites across the U.S., typically 50% or more of the time, to investigate, document, and drive resolution of electrical issues in the field, working outdoors in active construction environments in all weather., • Validate that medium- and low-voltage installations, terminations, grounding, bonding, conduit, cable management, and overall electrical workmanship meet NEC, NFPA 70E, IEEE, AHJ, and ON.energy internal standards prior to energization., • Witness, verify, and sign off on key electrical commissioning activities including insulation resistance / megger testing, continuity testing, torque verification, phasing, polarity, and pre-energization inspections., • Ensure all work is compliant with relevant codes (NEC, IEEE, NFPA 70E, OSHA) and ON.energy’s internal standards. Coordination & Issue Resolution • Partner with EPC contractors, electrical subcontractors, utility representatives, AHJs, and OEM field service engineers (inverters, switchgear, transformers, BESS) to push electrical issues to resolution on aggressive commissioning schedules., • Review electrical drawings, single-line diagrams, panel schedules, grounding plans, and protective device coordination submittals from a constructability and code-compliance perspective, and flag issues back to engineering before they reach the field. Permits & Documentation • Pull, sponsor, and close out electrical permits as required by AHJs across project jurisdictions, and coordinate inspections., • Capture electrical findings, deficiencies, root-cause analyses, and corrective actions through punch lists, daily field reports, photo documentation, and as-built redlines — leaving a clear paper trail behind every site visit. Required Qualifications • Active Texas Master Electrician license — Commercial (in good standing, no current disciplinary actions)., • Willingness to serve as ON.energy’s qualifying master electrician of record in Texas — i.e., to “hang” your license with ON.energy — for the duration of your employment., • 10+ years of progressive electrical experience, including significant time working as a licensed journeyman prior to obtaining your master license., • Hands-on experience installing, terminating, and/or troubleshooting medium-voltage (up to 35 kV) and low-voltage commercial or industrial electrical systems., • Direct field experience with large-scale electrical equipment such as inverters, switchgear, switchboards, transformers, MCCs, battery energy storage systems, or comparable utility-scale infrastructure., • Strong working knowledge of the NEC, NFPA 70E, IEEE, and OSHA standards as they apply to commercial and utility-scale installations., • Ability to read and interpret electrical drawings, single-line diagrams, schematics, panel schedules, grounding plans, and protective device coordination documentation., • Comfort working outdoors in all weather conditions on active construction sites — including walking uneven terrain, climbing ladders, working at elevation or in confined spaces where required, and lifting up to 50 lbs., • Comfortable wearing all required PPE, including arc flash gear, for extended periods., • Strong written documentation skills and proficiency with Microsoft Office and common field/construction documentation tools (e.g., Procore, Bluebeam, or similar)., • Ability to travel to project sites across the U.S. at least 50% of the time, including occasional extended deployments during commissioning peaks., • Valid U.S. driver’s license and willingness to drive to/from sites and rental vehicles between airports and remote project locations., • Excellent communication, problem-solving, and cross-functional coordination skills, with the ability to hold the line on safety and code compliance with contractors, OEMs, and customers. Preferred Qualifications • Experience commissioning BESS, AI UPS, solar, wind, or other utility-scale energy infrastructure projects., • Experience working on EPC or design-build projects in critical infrastructure, data center, or hyperscale environments., • Familiarity with commissioning protocols and QA/QC procedures for electrical systems, including FAT/SAT, IST, and energization sequencing., • Reciprocal master electrician licenses in additional U.S. states, or willingness to pursue reciprocity where ON.energy operates., • Familiarity with power system study tools such as ETAP or SKM (no need to be a power-systems engineer — but comfort reading their outputs is useful)., • OSHA 30, NFPA 70E qualified person training, CPR/First Aid, and similar field safety certifications., • Prior experience as the qualifying master electrician of record for an electrical contractor, EPC, or developer. Soft Skills • Authoritative yet collaborative — able to hold the line on safety and code compliance with contractors, OEMs, and customers., • Strong problem-solver and cross-functional coordinator., • Meticulous documentarian who leaves a clear paper trail behind every site visit., • Comfortable operating autonomously as the on-site electrical authority., • Calm and effective under aggressive commissioning schedules. For US-Based Roles — What You’ll Get • Competitive base salary + annual performance-based bonus eligibility, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and company holidays, • Per diem eligibility while traveling to project sites For All Roles • Professional development and growth opportunities, • Opportunity to grow with a mission-driven team shaping the future of clean energy Equal Opportunity: ON.energy is committed to equal employment opportunity and to maintaining a work environment free of harassment, discrimination, or retaliation. Accommodations: If you need an accommodation during the application process, email recruitment@on.energy. Benefits vary by role and location and are subject to change. For US-based roles - What you’ll get: • Competitive salary + annual performance-based bonus eligibility, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off and company holidays For Mexico-based roles - What you’ll get: • Competitive salary + annual performance bonus eligibility, • Christmas Bonus (Aguinaldo): 30 days, • Major medical expenses and life insurance, • Paid time off and holidays (per local policy) For all roles: • Professional development and growth opportunities, • Opportunity to grow with a mission-driven team shaping the future of clean energy, • Equal Opportunity: ON.energy is committed to equal employment opportunity and to maintaining a work environment free of harassment, discrimination, or retaliation., • Accommodations: If you need an accommodation during the application process, email _, • Benefits vary by role and location and are subject to change.

Our client provides application engineering, technical services, and manufacturing to supply the components you need for your machinery. Their experience and knowledge about your equipment allows us to design parts that truly work… for you! They have over 80 years of combined experience in the paper industry helping customers identify and solve their drive train problems. See below to learn more about our philosophy. The Industrial Sales Representative will provide, support and perform work relating to customer needs through “best practices” in the field. To maintain the highest integrity in representing the company while working with little to no supervision. Deliver a high quality of sale and workmanship while representing the company at all times in the highest standards of professionalism. • Outstanding organizational skills with high attention to detail, • Participate in on-site sales and gear inspections, allowing you to become familiar with our product and your territory, • Develop technical knowledge to effectively communicate products and gear inspection services to customers in your territory, • Build and maintain strong relationships with your customers, understanding their needs and communicating solutions, • Maintain consistent contact with existing customers and make cold calls to prospective customers in your territory, • Responsible for making in-person visits to prospects and existing customers, generating leads and quotes all the way to sale, • Create, submit and follow up on Quotes and RFQ’s, • Document and track progress for new and existing business opportunities; rate high, medium, and low potential, • Maintain accurate records of all interactions with new and existing customers and update the information in the Database, • Provide regular updates on progress, challenges, and opportunities, • Technological capabilities and understanding to communicate in today’s business environment, • 50% Travel., • Maintain monthly itinerary: wall calendar, outlook calendar, • Submit daily briefs and weekly reports (defined at hire), • Ability to read blueprints and drawings, • Ability to descend/ascend on ladders or any other needs to elevate/descend in a safe manner, • Provide services and customer support during field visits, • Tie workflow to schedule, • Manage on-site projects in expected time schedule with little supervision, • Diagnose errors or technical problems and determine proper and cost-effective solutions, • Follow all requirements for time-keeping and billing purposes, • Must hold a valid driver license in good standings, • Operate the vehicle in a safe manner, • Cooperate with technical team and share all information to the company, • Comprehend customer requirements make appropriate recommendations, • Maintain a professional appearance at all times, • Other duties as assigned, • This individual must be a team player and flexible to his(her) job assignments, • Work required hours, • This individual will follow all Company Policies and Standard Operating Procedures, • High School diploma/trade school or College degree (experience also will do in lieu of degree), • Must have 2 years of technical troubleshooting (paper industry experience preferred), • Ability to follow directions with minimal supervision, • Must be able to work individually and as a part of a team, • Must have good sense of smell, hearing, and including good vision as these are of vital importance as safety issues in the Shop, normal working conditions in main office, • Must be able to lift up to 60 pounds$55,000 - $65,000 a yearAbove base plus uncapped commissions with company vehicle. Established customer base that should lead to 6 figure income in first year. Core Values and Beliefs We know that quality relationships with our employees, customers, vendors, and community are the key components to our long term survival. Mission StatementWe will produce quality products at a fair price and on time. We will also provide outstanding customer service. IntegrityOur words and actions will be honest and ethical.RespectWe treat all people with courtesy and respect, valuing their contributions.ResponsibilityWe take responsibility for our actions and honor our obligations while meeting individual, organizational, and community needs.Customer ServiceWe are committed to understanding our customers which allows us to meet or exceed their needs.InnovationWe are constantly looking for ways to improve. We embrace change as an opportunity. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

* THIS JOB IS ONLY AVAILABLE TO INDIVIDUALS LIVING IN USA. NO RECRUITERS OR AGENCIES, PLEASE.* About AssetIntel AssetIntel is a software company that develops asset management software products for the transportation infrastructure industry. Our clients include state transportation agencies, city governments, toll authorities, transit agencies, the Federal Highway Administration (FHWA), and civil engineering firms. For more information, _. Job Description We are looking for passionate and experienced software developers with 5+ years of industry experience. You will be working in an agile and highly energetic startup to build a portfolio of products, reporting solutions, and more. By joining the AssetIntel team, you will have the opportunity to lead the development of a variety of toolsets spanning backend and mobile apps across different areas, including asset management, inspection management, capital management, IoT, and more. Our infrastructure primarily runs on Azure. As a Software Developer, you will work on multiple projects, analyze requirements, provide estimates, and be involved in the complete software development lifecycle. At Asset Intel, we believe that every developer is responsible for code ownership and works on the product's complete lifecycle, including design, development, testing, deployment, and support. Technical Stack Technical Stack • Database: SQL Server on Azure Cloud, Azure Table Storage, • Backend: .NET Core, • DevOps: Azure Pipelines, • Cloud: Azure Responsibilities ur team is looking for strong developers to help us build the aforementioned set of tools and deliver high-quality solutions in an agile environment. in a highly agile environment. Some of the core responsibilities include: • Design, develop, implement, and maintain web and/or mobile applications in a highly collaborative environment., • Contributing to the complete technology stack, especially the backend and databases., • Continuously innovate and strategize on making our applications faster and more resilient., • Prioritize and manage work while adhering to critical project timelines in a fast-paced environment., • Share a passion for design and technology. Skills and Experience • Minimum 4 years of experience as a backend or full-stack developer. Applications with less than 4 years of experience will not be considered., • Knowledge of data structures and object-oriented programming (OOP)., • Knowledge of database design and understanding of SQL queries., • Experience working with cloud-based systems., • Strong analytical and problem-solving skills., • Self-driven and able to contribute as part of a small team.Benefits and Perks, • Work remotely from anywhere in the U.S., • Market-competitive total compensation package and performance-based bonus., • Generous vacation policy., • 401(K) Match., • Plenty of opportunities for growth, working alongside some of the brightest minds in the industry.

Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques that allow power-hungry systems to do more with less. Job Summary: We are seeking a Senior Interactive Simulation Developer to lead the development of an immersive simulation environment for mission planning, training, UI/UX testing, and more. The ideal candidate will have a proven track record in developing high-quality products and simulations, particularly in Unreal Engine. As a senior team member, you will oversee the technical development, guide the project, and shape the simulation roadmap. • Interpret electrical schematics, wiring diagrams, and harness drawings to independently build and troubleshoot complex harness assemblies., • Manufacture prototype and production harnesses—including shielded, twisted pair, coaxial, high-voltage, and multi-branch—following Epirus work instructions and prescribed standards., • Install, route, and rework harnesses within mechanical assemblies, enclosures, and vehicles., • Perform continuity, resistance, insulation, and functional testing using multimeters, oscilloscopes, hipot testers, and network analyzers or other specialized in process equipment., • Setup and operate crimping tools (manual, pneumatic, and hydraulic) to perform precision crimps on a variety of contacts and terminals per IPC/WHMA-A-620 and MIL-spec standards., • Inspect and verify crimp quality using pull testing, crimp micrometers, and visual inspection under magnification., • Support First Article Inspection (FAI), development builds, rapid prototyping, and final acceptance of electrical harnesses., • Ensure workmanship quality, maintain build traceability, and uphold zero-defect standards through proper documentation and process control., • Collaborate with production, test, and quality teams to resolve build issues and implement corrective actions., • Mentor and train Junior Harnessing Technicians., • Maintain accurate records of builds, rework, and inspections in accordance with AS9100 and ISO9001 quality standards., • 5+ years of hands-on experience building aerospace/defense or high-reliability electrical harness assemblies., • Expert knowledge of hand tools and equipment used for crimping, stripping, cutting, and soldering., • Strong soldering skills. Ability to hand solder lap and lash splices, and fine pitch soldering cups., • Strong understanding of IPC/WHMA-A-620 standards, J-STD-001, and NASA workmanship standards., • Ability to read and interpret complex electrical and mechanical drawings, BOMs, and manufacturing plans., • Proficient with test equipment such as multimeters, hipot testers, and oscilloscopes., • Proven track record of building complex harnesses., • Comfortable in a fast-paced, iterative, and high-standards environment., • Minimum 8+ years' experience as a technician in defense, aerospace, or equivalent high‐reliability field, • Certified to J-STD-100, IPC-620, and IPC-610 or NASA STD8739.4, • Strong knowledge and experience in manufacturing, troubleshooting, testing, rework and repair of harnessing, • Experience with connectors (e.g., D38999, Glenair, Micro-D, Nano-D, MIL-spec coax)., • Familiarity with spacecraft, UAV, missile, or ground combat system harnessing practices., • Experience with cleanroom protocols and ESD-safe practices, • Experience with PLM and MES systems such as Oracle, Epicor, Ion, JIRA etc., • Ability to support light CAD work for layout and harness routing (SolidWorks Electrical, E3, or similar)., • May be to retain a TS Clearance ITAR REQUIREMENTS: • To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR _. At Epirus, you’ll work with technical peers and great people—and get first crack at some of the defining technology challenges of our time. Here, “impossible” is just a challenge. We're a diverse, fast-growing team of change-makers fueling the future of energy with revolutionary solutions. _ As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is:$76,500—$96,900 USD

Critical Key requirements o The proposed QA Engineer shall possess a minimum of ten (10) years prior work experience, with at least seven (7) of those years working in Quality Assurance, Auditing, Project Management or Construction Management. o Hold at least a Bachelor’s degree in a relevant field of Science, or Applied Science (e.g. – engineering, Engineering Technology) Preferred structural background Working knowledge of Microsoft Office Suite and Office 365 Experience with construction Quality systems, design quality processes, auditing, report writing, quality testing and NYSBC o Experience with the design and construction of projects for structural, civil, electrical or communications and signal Highly desired: Worked with ACI, NFPA, ASTM, AASHTO, NYSBC/International Building Code, OSHA, AREMA, ISO, UL, AISC, FTA, FRA SUMMARY OF THE FUNCTION/ROLE The objective of this contract is to augment C&D Metro-North Railroad’s Quality Assurance (QA) staff with one (1) full time Quality Assurance (QA) Engineer to work out of Metro-North Offices at 420 Lexington Avenue, Mid-town Manhattan. The QA Engineer shall be under the supervision of and report directly to Director of Quality Assurance or his’s/her’s designated authorized representative. The QA Engineer shall work five days a week, eight hours a day. A railroad pass for transportation to field meetings along the right of way will be provided. The overall duration of the contract shall be approximately twelve (12) months. I. DETAILED DESCRIPTION OF SERVICES REQUIRED The QA Engineer shall provide various related services to support the Capital Programs Department, which is comprised of the following areas: Line Structures, Buildings, Shops and Yards, Passenger Stations, Electrical/Power, Security Enhancements, Parking Lots, Site Work, plumbing, Mechanical, and Environmental. The work is predominantly field work. The type of tasks required of the Consultant shall include but are not limited to the following: A. Immediate Needs Project Quality submittals o Oversight of construction consultants and the Contractor’s Quality personnel to ensure contract quality requirements are being followed. o Review, comment, and monitor status of Consultant or Contractor’s Quality Manual and Contract Quality Plan (CQP) and, where applicable Software QA Plan, to ISO 9001 standards o Review, comment, and monitor the status of Inspection & Test Plan and Quality Work Plans o Review and comment on Commissioning and Systems Integration Plan and testing procedures o Review and comment on Contractor QC procedures, forms, matrixes o Review, comment, and monitor the status of Inspections, Tests, and Nonconformances Chapter 2 Project Contract Quality Activities o Perform inspection walkthroughs alongside the Project Management Team and provide technical recommendation o Attend periodic Quality Work Group Meetings and other project meetings to plan out future Quality events, resolve quality breakdowns and non-conformances, make decisions concerning the disposition to non-conformances, etc. o Participate in FAI / FAT for critical equipment and/or systems, such as on-site inspection of the quality control process o Monitor submission of required Quality submittals. o Perform audits/assessment/inspections of suppliers or manufacturers. Chapter 3 System Level Oversight of Quality Management Activities o Monitoring of compliance to the Consultant or Contractor’s QM/ CQP, such as calibration practices, approved procedures, documented work, performed testing and approvals o QA audits of jobsite activities as well as project surveillances. o System level oversight of personnel performing special processes (for special processes where applicable Code requires certified skills) II. RELEVANT PRIOR EXPERIENCE The proposed QA Engineer shall possess a minimum of ten (10) years prior work experience, with at least seven (7) of those years working in Quality Assurance, Project Management or Construction Management. Hold at least a Bachelor’s degree in a relevant field of Science, or Applied Science (e.g. – Engineering, Engineering Technology) Working knowledge of Microsoft Office Suite and Office 365 Experience with the design and construction of projects around an operating railroad is highly desirable Experience with training, systems development, construction or construction management, and quality management practices III. PERSONNEL QUALIFICATIONS: Personal abilities of being well-organized, a self-starter, a team player, a multitasker Strong oral and written communication skills are required to develop policies and guidelines, chair meetings, as well as provide technical and administrative support as needed Strong interpersonal skills Strong technical, analytical and problem solving skills Must have valid driver’s license IV. PREFERRED: Completed training in the principles and practices of Quality Management Systems or Quality Management System audits under a program sanctioned by a National or International Standards organization Completed training in the principles and practices of Project Management or Construction Management under a program sanctioned by a National or International Standards organization Training in and experience in implementing quality management systems Active NYS Professional Engineering License Experienced in quality control in the construction environment. Experience with Supplier Qualification, At-source product quality inspections Industry experience: o Railroad infrastructure o Railroad field work practices o Any government-regulated industry requiring Quality Management Systems Flexible work from home options available. Compensation: $70.00 - $80.00 per hour WORKING FOR YOUR SUCCESS! "Empowering Excellence, Enabling Growth: Transforming Businesses through Expertise, Collaboration and Innovation!" At Kumar Consulting, our vision is to be a pioneering force in transforming businesses through a unique blend of expertise, collaboration, and innovation. With decades of experience in diverse sectors such as Health & Human Services, Transportation, Logistics, Media & Advertising, Insurance, and State and Federal Programs, we are committed to driving positive change and growth. Our unwavering dedication to excellence propels us forward as we shape the future of Enterprise Architecture, Business Architecture, Business Process Management, Process Improvement, Project Management, Solution Architecture, Software Development, and IT Staffing. We envision a world where businesses and organizations thrive, powered by our comprehensive insights and holistic solutions. Guided by integrity, collaboration, and continuous learning, we strive to be the trusted partner for public and private sector companies seeking transformational success. With each endeavor, we aim to redefine possibilities, exceed expectations, and leave an indelible mark on industries worldwide. Join us as we redefine the boundaries of innovation, create lasting value, and foster growth that resonates across sectors and generations. At Kumar Consulting, we believe in a future where expertise and innovation converge to shape a world of limitless opportunities. Looking for Opportunity to grow? "For over a decade, we have been empowering excellence, enabling growth, and transforming businesses through expertise, collaboration, and innovation. Join our dynamic consulting team and contribute to shaping the future of business."

Our client provides application engineering, technical services, and manufacturing to supply the components you need for your machinery. Their experience and knowledge about your equipment allows us to design parts that truly work… for you! They have over 80 years of combined experience in the paper industry helping customers identify and solve their drive train problems. See below to learn more about our philosophy. The Industrial Sales Representative will provide, support and perform work relating to customer needs through “best practices” in the field. To maintain the highest integrity in representing the company while working with little to no supervision. Deliver a high quality of sale and workmanship while representing the company at all times in the highest standards of professionalism. • Outstanding organizational skills with high attention to detail, • Participate in on-site sales and gear inspections, allowing you to become familiar with our product and your territory, • Develop technical knowledge to effectively communicate products and gear inspection services to customers in your territory, • Build and maintain strong relationships with your customers, understanding their needs and communicating solutions, • Maintain consistent contact with existing customers and make cold calls to prospective customers in your territory, • Responsible for making in-person visits to prospects and existing customers, generating leads and quotes all the way to sale, • Create, submit and follow up on Quotes and RFQ’s, • Document and track progress for new and existing business opportunities; rate high, medium, and low potential, • Maintain accurate records of all interactions with new and existing customers and update the information in the Database, • Provide regular updates on progress, challenges, and opportunities, • Technological capabilities and understanding to communicate in today’s business environment, • 50% + Travel., • Maintain monthly itinerary: wall calendar, outlook calendar, • Submit daily briefs and weekly reports (defined at hire), • Ability to read blueprints and drawings, • Ability to descend/ascend on ladders or any other needs to elevate/descend in a safe manner, • Provide services and customer support during field visits, • Tie workflow to schedule, • Manage on-site projects in expected time schedule with little supervision, • Diagnose errors or technical problems and determine proper and cost-effective solutions, • Follow all requirements for time-keeping and billing purposes, • Must hold a valid driver license in good standings, • Operate the vehicle in a safe manner, • Cooperate with technical team and share all information to the company, • Comprehend customer requirements make appropriate recommendations, • Maintain a professional appearance at all times, • This individual must be a team player and flexible to his(her) job assignments, • This individual will follow all Company Policies and Standard Operating Procedures, • High School diploma/trade school or College degree (experience also will do in lieu of degree), • Must have 2 years of service in technical troubleshooting (paper industry experience preferred), • Ability to follow directions with minimal supervision, • Must be able to work individually and as a part of a team, • Must have good sense of smell, hearing, and including good vision as these are of vital importance as safety issues in the Shop; normal working conditions in main office, • Must be able to lift up to 60 pounds$55,000 - $65,000 a yearAbove base plus uncapped commissions with company vehicle Established customer base - six figure income possible in first yearCore Values and Beliefs We know that quality relationships with our employees, customers, vendors, and community are the key components to our long term survival. Mission StatementWe will produce quality products at a fair price and on time. We will also provide outstanding customer service. IntegrityOur words and actions will be honest and ethical.RespectWe treat all people with courtesy and respect, valuing their contributions.ResponsibilityWe take responsibility for our actions and honor our obligations while meeting individual, organizational, and community needs.Customer ServiceWe are committed to understanding our customers which allows us to meet or exceed their needs.InnovationWe are constantly looking for ways to improve. We embrace change as an opportunity. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

About SewerAI Corporation SewerAI is transforming underground infrastructure management through AI-powered inspection and risk analysis. Our platform helps contractors, engineering firms, and utilities unlock valuable insights from sewer inspection data—turning hours of manual video review into actionable intelligence in minutes. After doubling our customer base over the past year, we’re now entering an exciting phase of accelerated growth. The Customer Support Technician II is an entry-level technical support role responsible for assisting customers with day-to-day use of SewerAI’s SaaS platforms, PIONEER and AutoCode. This role focuses on resolving common technical issues, answering product usage questions, and ensuring customers receive timely, accurate support. As part of the Customer Enablement organization, this role works closely with Support, Product, Engineering, and Professional Services teams to triage issues, follow established troubleshooting processes, and escalate more complex problems with clear documentation and context. The ideal candidate is detail-oriented, curious, and comfortable communicating with customers while learning new technical systems. Reports to: Director of Customer Enablement Bay Area candidates will be prioritized. Candidates local to the Bay Area should expect a hybrid schedule based out of our Walnut Creek, CA location. We are open to remote candidates as well (depending on experience and role fit). Respond to customer support requests via Pylon, Slack, in-app chat, and email. Diagnose and resolve common, documented issues related to: User access and permissions Platform usage and workflows Data visibility or expected system outputs Follow established troubleshooting guides and support playbooks. Clearly communicate findings, next steps, and resolutions to customers. Accurately classify and document incoming support requests. Escalate issues to Engineering, Product, or Professional Services with clear summaries, relevant context, and reproduction details when available. Track escalated issues and communicate status updates back to customers. Use and contribute to internal and customer-facing documentation, including FAQs and troubleshooting guides. Identify recurring issues and flag documentation or process gaps to the team. Maintain clean, well-documented tickets that support efficient collaboration. Meet defined first response time (FRT) and resolution SLAs. Deliver professional, clear, and customer-focused support interactions. Support overall team goals for customer satisfaction and ticket backlog health. 2–4 years of experience in technical support, SaaS support, IT helpdesk, or a related role. Strong written communication skills and attention to detail. Comfort working in ticketing systems and real-time support environments. Ability to learn technical products, workflows, and tools quickly. Experience with ticketing platforms such as Pylon, Zendesk, Jira, or similar. Basic familiarity with software troubleshooting, data concepts, APIs, or technical workflows. Exposure to SaaS products serving operational or technical users. 2-4 years of experience in the Underground Infrastructure Industry Compensation: $82,000 base salary + up to $93,000 OTE Base pay may be higher for candidates who live in the Bay Area, in alignment with location-based compensation practices and state-specific pay transparency requirements. Actual compensation will be determined based on job-related skills, experience, and location. Benefits include: Medical, Dental, Vision, Basic Life, 401(k), and more Unlimited PTO Tools you need to get the job done Competitive salary and potential equity-based remuneration Budget for courses, books, conferences—your development is important to us _ SewerAI is proud to be an Equal Opportunity Employer. We are committed to providing a workplace free from discrimination or harassment on the basis of age, disability, sex, race, religion or belief, gender reassignment, marriage/civil partnership, pregnancy/maternity, or sexual orientation. All your information will be kept confidential according to EEO guidelines.

Airwallex is the only unified payments and financial platform for global businesses. Powered by our unique combination of proprietary infrastructure and software, we empower over 200,000 businesses worldwide – including Brex, Rippling, Navan, Qantas, SHEIN and many more – with fully integrated solutions to manage everything from business accounts, payments, spend management and treasury, to embedded finance at a global scale. Proudly founded in Melbourne, we have a team of over 2,200 of the brightest and most innovative people in tech across 26 offices around the globe. Valued at US$8 billion and backed by world-leading investors including T. Rowe Price, Visa, Mastercard, Robinhood Ventures, Sequoia, Salesforce Ventures, DST Global, and Lone Pine Capital, Airwallex is leading the charge in building the global payments and financial platform of the future. If you’re ready to do the most ambitious work of your career, join us. We hire successful builders with founder-like energy who want real impact, accelerated learning, and true ownership. You bring strong role-related expertise and sharp thinking, and you’re motivated by our mission and _. You move fast with good judgment, dig deep with curiosity, and make decisions from first principles, balancing speed and rigor. You're humble and collaborative; turn zero‑to‑one ideas into real products, and you “get stuff done” end-to-end. You use AI to work smarter and solve problems faster. Here, you’ll tackle complex, high‑visibility problems with exceptional teammates and grow your career as we build the future of global banking. If that sounds like you, let’s build what’s next. The SME & Growth Business team at Airwallex is a passionate group of collaborators and business champions dedicated to empowering small and medium-sized enterprises (SMEs) to thrive in the global economy. We combine deep financial expertise with a growth mindset, working closely with our clients to understand their unique needs and develop tailored solutions that streamline cross-border payments and unlock new revenue streams. As a team, we are driven by a desire to make a positive impact and are constantly innovating to find new ways to support the success of our SME customers. Airwallex aspires to serve the fastest-growing businesses globally. As the Sales Manager, SME & Growth, you will lead and scale a team of full-cycle Account Executives responsible for acquiring and closing customers within SMB segments. You will be accountable for revenue, pipeline health, deal quality, and execution velocity. This role requires a hands-on sales leader who can coach AEs on discovery, deal strategy, and closing, while also building the processes, metrics, and operating cadence needed to scale a high-performing SMB sales motion. If you are a data-driven leader who thrives on intensity, accountability, and continuous improvement and developing strong closers. This role offers the opportunity to shape one of Airwallex’s most important growth engines. This role is Remote in the US. Lead, coach, and develop a team of full-cycle Account Executives, with a strong focus on closing excellence and consistent revenue delivery Partner closely with the outbound sales leader and cross-functional team leaders to continuously explore, test, and refine ICPs, evaluate new SMB verticals, and provide structured feedback based on deal quality, win/loss insights, and revenue outcomes Coach AEs on prioritizing leads and opportunities effectively, ensuring time and effort are focused on the highest-conversion, highest-revenue deals Drive best-in-class pipeline management practices, including deal qualification, stage progression discipline, pipeline coverage, and forecast accuracy Develop AEs ability to run strong discovery, identify economic buyers, and manage multi-stakeholder deal cycles within SMB organizations Coach and inspect deals on negotiation strategy, objection handling, pricing conversations, and close planning to improve win rates Instill structured deal management habits, including clear next steps, mutual action plans, and close plans for every active opportunity Drive a metrics-led operating cadence focused on deal velocity, stage conversion, win rates, and pipeline quality Leverage data, AI, and sales tools to improve account research, deal strategy, and pipeline visibility Maintain high standards of CRM hygiene, deal inspection, and sales process adherence We're looking for people who meet the minimum requirements for this role. The preferred qualifications are great to have, but are not mandatory. Minimum of 5 years of experience in B2B sales, with at least 2 years of experience managing/coaching Account Executives Proven track record closing deals and managing complex SMB pipelines end-to-end Strong commercial judgment with the ability to prioritize leads, assess deal quality, and forecast accurately Deep experience coaching AEs on closing, negotiation, objection handling, and pipeline management Comfortable managing multi-stakeholder deal cycles, including traditional business owners and finance teams Excellent communication skills - structured, persuasive, and credible in commercial negotiations Experience operating in fast-paced, high-growth environments with high accountability Experience leading SMB sales teams in fintech, payments, or trade-related platforms Strong intuition for mapping customer payment flows and identifying expansion or revenue opportunities Demonstrated ability to improve close rates, deal velocity, and win consistency Experience leveraging AI and sales tools to improve deal strategy, pipeline visibility, and forecasting accuracy Relationship-first leadership style with a strong coaching and talent-development mindset To protect you from recruitment scams, please be aware that Airwallex will not ask for bank details, sensitive ID numbers (i.e. passport), or any form of payment during the application or interview process. All official communication will come from an @ email address. Please apply only through or our official LinkedIn page. Airwallex does not accept unsolicited resumes from search firms/recruiters. Airwallex will not pay any fees to search firms/recruiters if a candidate is submitted by a search firm/recruiter unless an agreement has been entered into with respect to specific open position(s). Search firms/recruiters submitting resumes to Airwallex on an unsolicited basis shall be deemed to accept this condition, regardless of any other provision to the contrary. Airwallex is proud to be an equal opportunity employer. We value diversity and anyone seeking employment at Airwallex is considered based on merit, qualifications, competence and talent. We don’t regard color, religion, race, national origin, sexual orientation, ancestry, citizenship, sex, marital or family status, disability, gender, or any other legally protected status when making our hiring decisions. If you have a disability or special need that requires accommodation, please let us know.

Charleston Home Inspection (CHI) is a leading provider of professional home inspections serving the Charleston, SC market. We help local homeowners and buyers make confident, informed decisions about one of the biggest purchases of their lives. We're looking for an Inside Sales Representative to join our Growth Team and help drive that mission forward. This is a great opportunity for someone who loves connecting with people over the phone, thrives in a fast-paced sales environment, and wants to build a career with a company that values hard work and results. This role is all about building relationships with real estate agents in the Charleston area and turning those relationships into home inspection referrals. You'll spend your day on the phone and using electronic communication to generate new business and keep existing partnerships strong. • Build positive relationships with real estate agents through phone calls and electronic communication, • Identify and work through obstacles that get in the way of a sale, • Drive new business and home inspection referrals through agent relationships, • Schedule and confirm in-person meetings, events, and presentations at real estate offices for our Outside Sales team, • Maintain strong existing partnerships through consistent, professional follow-up, • Attend weekly team meetings and support fellow team members as needed, • Someone who genuinely enjoys talking on the phone and isn't afraid to make cold calls, • A self-starter with real ambition and the drive to succeed, • A service-minded team player who's passionate about building relationships and growing business, • A track record of meeting or exceeding sales goals, • Strong verbal and written communication skills, • A working knowledge of marketing strategies and consumer psychology, • Comfort with word processing, spreadsheet, and presentation software, • Excellent follow-through, organization, and time management, • Real estate industry experience is a plus, • Proficiency with word processing, spreadsheet, and presentation software, • Reliable, high-speed internet connection, • A quiet, distraction-free work environment, • 1-2 years of inside sales experience preferred, • Experience working with a remote, distributed team is a plus

Job DescriptionSalary: $33.00 - $38.00 / Hour SureSite Consulting Group, LLC provides complete infrastructure deployment services through its teams of real estate, planning, and engineering, environmental, project management and construction management experts. We are currently looking for a Construction Field Technician III / Foreman to be responsible for network element deployment during the telecom implementation (TI) phase of the project. Typically, the Construction Field Technician III / Foreman will run a 2 or 3 construction field technician crew that performs mostly hardware delivery and installation of the product. The Construction Field Technician III / Foreman will ensure that all work is completed to the satisfaction of the customer in accordance with defined specifications and technical standards and those requirements for health, safety and quality are maintained at the highest levels throughout the implementation cycle. The responsibility of this position is managing specialized work efficiently, with confidence and competence. The position requires above average attention to details, concern for the exact correctness of work, and strong commitment to tasks completed on time. The person in this position will take work seriously, has a strong sense of duty, and is disciplined.A somewhat faster-than-average pace will be the norm for this position. Detailed, specialized work is the major focus. The person in this position will require clearly defined work, responsibilities, and reporting relationships, ongoing and thorough training opportunities to develop expertise and increase confidence, and frequently expressed appreciation of the person's competence, conscientiousness, and loyalty. The position will provide security in a stable work environment, allowing the person to plan for, focus on and complete tasks on hand. When changes in the nature of the work occur, the person in this position will need direction, training and support. The position will generally be task oriented, requiring someone with a conservative, careful, and cautious approach to work.The Construction Field Technician III / Foreman will embrace our internal core values of ethical behavior, integrity, respect for one another and commitment to fulfill our work with confidence, progressive thinking and unwavering quality. These internal values ensure our customers experience a relationship-based approach, driven to meet project goals through personnel who are trusted, professional and accountable for achieving results based on expertise and innovation. Essential Functions: • Hardware Installation Management (40%) - Lead and manage multiple crews of three or four field technicians that will be installing, erecting, maintaining, repairing, removing, or retrofit towers and rooftop antenna systems. Will also perform third party inspections., • Hardware Commissioning (10%) - Commission (test) hardware in accordance with the prevailing contractual share of the responsibility, specifications and quality requirements and document progress in the applicable Site Folder., • Documentation (20%) - Construction Field Technicians III / Foreman are responsible to log all installation, test, close out and inspection results. The Construction Field Technician III / Foreman will be responsible for reporting the crew hours for employees assigned on their crew., • Quality (20%) As the last representative on-site, the Construction Field Technician III / Foreman is responsible to assist in escalating all QA deficiencies to the Construction Field Manager or clearing the issue., • Fault and Discrepancy Reporting (10%) The Construction Field Technician III / Foreman will be responsible for managing the contents of an assigned commissioning kit for the issuance of fault and/or discrepancy reports to document kit churn. He/she will assist in ensuring defective components are promptly returned for replacement processing and will document and report equipment and material shortages immediately. The Construction Field Technician III / Foreman will be responsible for assisting the Construction Field Manager on the installation of all network elements installed on site and other equipment as applicable and directed by the Construction Field Manager. Job Requirements: • At least five years of wireless industry experience., • Job related certifications safety, rescue, CPR, etc., • A High School Diploma/GED or higher., • Anritzu / PIM / fiber testing certification, • Connector certification (Andrew, PPC, CommScope, etc.), • Previous experience working as a tower climber or in man lifts., • Computer skills and knowledge of SWEEP and PIM equipment., • Know basic architecture of GSM, UMTS and LTE., • Ability to review and fix discrepancies., • Understand basic RF Design for sites., • RFDS knowledge., • Ability to fabricate tower hardware and accessories to maintain, repair, and retrofit towers and antenna systems in order to support communication system operation using fixed and portable power tools and equipment., • Develop leadership skills as part of the continuous improvement in order to gain the necessary knowledge and skills in the future to train and transfer knowledge to less experienced field technicians., • Must know the basic RF and grounding safety standards for installation., • Good communication skills (interpersonal and oral)., • Good English speaking and writing skills., • Reports to: Field Construction Manager, • Supervises: Construction Field Technician I and II crew(s) Other Duties: • Some work will occasionally be under adverse conditions (e.g. high towers, inclement weather, remote sites, etc.) throughout the US using safety equipment and hand, power and specialty tools., • Able to transport required equipment and materials to work locations including remote areas to perform functions of the job using appropriate company and specialty vehicles., • In-depth understanding of telecommunications hardware installation and turfing., • Must be able to maintain constant communication and interact successfully with team and customer alike to understand project requirements., • Must work well in a team environment and be able to work with a diverse group of people., • Possess and exhibit a strong positive attitude toward customer service and be diplomatic in resolving issues., • Overtime required as needed., • Must have the ability to lift 50 lbs of equipment., • Requires the ability to work for long periods of time in a strong RF environment area., • Requires working during the maintenance window hours (9:00 pm to 6:00 am), • Job's Normal Work Environment:, • The work environment involves some physical risks and hazardous conditions., • The position requires the use of standard installation equipment for cell sites. (Power tools, DC crimpers, thermoweld, hand tools, etc.), • The position will requireworking aloft on cell towers, either in a man-lift or climbing. AAP/EEO Statement: • We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are committed to providing a workplace free from discrimination and harassment, fostering a diverse and inclusive environment where all employees can thrive.

Job Description About MGE MGE Underground is a growing utility infrastructure contractor serving utility companies from our Paso Robles headquarters and regional hubs throughout California. Our mission is to support our clients’ expanding utility and infrastructure requirements by positioning MGE as the leading provider of innovative construction solutions at the best value. Our Core Values Safety | Continuous Development | Respect | Integrity | Performance | Trust | Fun How You Can Make an Impact The Mechanic is experienced in a wide range of mechanical skills. This position will be responsible for but not limited to troubleshooting hydraulic, electrical, and gas/diesel problems, including some fabrication. Additional responsibilities also include the maintenance, inspection, and repair of company owned vehicles and equipment, assisting with audits, inspections, and general upkeep of the shop. This position has the potential for promotion and wage advancement within the department with continued on the job experience and the completion of relevant certification programs. Also, the ability to travel throughout California is required, as well as the ability to work weekends and overtime as needed. How You Will Contribute • Coach and mentor entry level Mechanics, oversee daily work/performance, inspect installations/repairs, ensure all safety standards and practices are met., • Ability to make repairs on job sites as needed., • Conduct inspection of vehicles and equipment to diagnose and troubleshoot problems for repair., • Repair and maintain construction equipment of various types and sizes from light-duty to over the road trucks and from light-duty to heavy-duty operating equipment., • Perform preventative maintenance following operations manuals as well as electrical and hydraulic diagrams/ air condition units., • Remove and replace defective parts by dismantling devices using hand and power tools., • Test repaired equipment to ensure proper performance when used., • May fabricate, weld, and cut parts, using arc-welding/ wire feed and flame cutting equipment., • Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery., • Perform Department of Transportation (DOT) ninety-day inspections. What You Bring to the Table • Required: Ability to quickly learn and understand various processes regarding MGE’s policies, procedures, and software programs., • Excellent communication skills., • Ability to read, write and follow oral and written instructions., • Ability work and drive safely in all weather and road conditions., • Ability to work flexible hours and days, to include nights, weekends, and extended hours., • Ability to read and interpret schematics., • Valid Class C Driver’s License with a clean driving record., • Desired: Valid Class A Driver’s License with a clean driving record., • Certifications in: Air Conditioning, Computer Diagnostics, Boom Inspections, Welding, Hydraulics, BIT, and Air Brakes. Your Prior Experience • High School Diploma or General Equivalency Diploma (GED), • Minimum 4 years of experience in heavy-duty equipment service and repair., • Minimum 4 years of experience with hydraulics, diesel engines, and DOT/BIT., • One year experience with air brakes., • One year experience with vehicle electrical and computer controlled systems., • Welding and fabrication experience Our Competitive Package Pay: $40.00 - $53.00 per hour This pay range is our competitive compensation at the time of this job posting. Your pay will be determined based on experience, education, skills, and applicable knowledge. Above and Beyond Benefits • Medical, dental, vision, and life insurance., • 401K, • Vacation accrual for all non-exempt employees in addition to ten paid company holidays., • Flexible Time-off Policy that promotes a culture of freedom and responsibility for paid time-off., • Multiple monitors, standing desks, and other ergonomic equipment to match your work style., • Monthly birthday celebrations, team lunches, company-wide employee recognition events, and other employee engagement opportunities., • Employer-sponsored learning/career development opportunities and conferences/seminars., • Employee Assistance Program: no-cost counseling, legal consultation, financial consultation, ID recovery, emotional well-being resources, dependent care resources, and crisis consultation. Additional Information Job Type: Full-Time, On-Site Affirmative Action/EEO MGE Underground is an equal opportunity employer and does not discriminate based on any protected characteristics. Pre-Employment and Physical Requirements Successful applicants must pass a drug screen and background check before beginning employment. The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions • Employee is frequently required to walk, use hands to finger, handle, or feel objects, tools, or controls, and talk or hear. The employee is often required to stand and walk for prolonged periods of time; reach with hands and arms; and stoop, kneel, crouch, or crawl., • Employee must be able to lift to 50 pounds individually, push, pull or carry objects, use abdominal and lower back muscles to provide support over time without fatigue and to effectively jump, sprint or throw an object., • Must be able to bend, stretch, push, pull, and move as needed to reach, clean, and service machinery., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to visually inspect machines., • Employee may be required to drive a motor vehicle and travel to various locations. Other Duties Your duties and responsibilities may change at any time, with or without notice, based on the company’s needs. Powered by JazzHR 0qZZm4yawm

Job Description We're looking for entry-level Lot Attendants to build an exciting career at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500! As a Lot Attendant, you will be focused on maintaining the cleanliness and appearance of the vehicles at our Market Hubs. As part of this role, you will be expected to coordinate with fellow employees to ensure timely deliveries and the highest level of customer satisfaction. Interested in joining the team? Check out more below: • This is a part-time position, • PTO and paid holidays + your birthday is a holiday Unlock Your Earning Potential! We offer a competitive starting hourly rate of $19/hr with significant growth opportunities based on performance. You can boost your earnings within a short timeframe: • Pay Range: $19-$20 hourly, • Starting Pay: $19/hr, • At 3 Months: $19.25/hr, • At 6 Months: $19.50/hr, • At 9 Months: $19.75/hr, • At 12 Months: $20/hr In your first year, you can progress from $19hr to $20hr through our performance-based Careers Not Jobs program, which provides four merit opportunities annually. Through this program, eligible team members can enjoy an additional $0.25 increase in their pay every 90 days. We're looking for enthusiastic, energetic, and self-motivated team players to: • Ensure each vehicle is inspected for mechanical, drivability or cosmetic concerns, • Wash and vacuum all inventory on a regular basis, • Complete multi-point inspection on arriving inventory to include fuel level, safety features, drivability test and proper display of all company and state disclosures, • Maintain positive relationships with coworkers and external vendors, • Interact and communicate with team members and management across all lines of the business., • Must adhere to regular and predictable attendance. General qualifications and requirements • High School Diploma or equivalent is desirable, • Must be 18 years of age and have a valid driver's license, • Must have a valid driver's license and clean driving record for the past 3 years, • Must be able to lift up to 60 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels., • Must be able to carry and transport up to 60 pounds up to 20 feet., • Requires standing for an extended period of time with frequent stretching, reaching, walking and stooping, pushing and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance., • Requires working outdoors in all weather conditions., • Requires excellent visual acuity and manual dexterity., • Requires use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment., • Requires frequent driving and some typing., • Must adhere to regular and predictable attendance. About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. Being a brand ambassador of Carvana means having a passion for our vision and having a motor that never quits when it comes to representing our brand and values. Our Market Operations team members work as a team to deliver awesome customer experiences in their markets, while also remaining agile enough to keep up with the ever-changing beat and cadence of your daily activities. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description COMPANY OVERVIEW: Certerra is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, Certerra has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Certerra is a consulting firm with over 65 years of quality service that offers professional services in the southwestern United States in the fields of geotechnical engineering, environmental engineering, construction materials engineering and testing, nondestructive testing, and welding inspection. Job Description: Certerra Southwest, a leading engineering consulting firm, has an excellent opportunity for an Environmental Scientist/Project Manager in our Fresno, CA office. The successful candidate will conduct a variety of field and office duties to support senior team leaders. Project assignments will take you to locations throughout the southwestern United States, but primarily in Arizona. This position requires a hard-working, safe, efficient and dedicated employee that is excited to receive training on the job and expand their current skill set. General responsibilities: (Include but are not limited to:) • Conduct field sampling and inspections for soil, groundwater, air, and building materials. • Conduct Phase I Environmental Site Assessments (ASTM E1527-21) including historical records review, site reconnaissance, and preparation of technical reports., • Perform Phase II environmental investigations including soil, groundwater, and soil vapor sampling under the direction of project managers., • Perform asbestos building inspections and bulk sampling in accordance with AHERA and state regulatory requirements., • Conduct lead-based paint inspections and risk assessments using XRF analyzers and paint chip sampling techniques., • Perform indoor air quality (IAQ) monitoring including collection of samples for VOCs, mold spores, particulate matter, and other indoor contaminants., • Document field activities through field notes, photographs, and site sketches., • Communicate with clients and contractors during field activities. Required Job Qualifications: • • Environmental science, biology, chemistry, industrial hygiene or similar background., • • 3-5 years of experience in environmental or industrial hygiene consulting., • • Experience with environmental sampling techniques including soil, groundwater, air, and building materials., • • Knowledge of federal and state environmental regulations (EPA, OSHA, ADEQ, etc.)., • • Strong technical writing and data organization skills., • Build business clients, • Manage staff through projects, • • Certifications such as AHERA Building Inspector, AHERA Contractor/Supervisor, Lead Inspector/Risk Assessor, or 40-hour HAZWOPER are preferred., • • A valid driver’s license with a clean driving record • Pass a pre-employment drug screen Physical Demands: • Physical examination required to obtain medical clearance to work, • Ability to stoop, kneel and to routinely lift and carry 50 pounds, • Ability to travel for field work and some overnight stays, • Able to work in variable outside conditions, including extreme heat or cold EOC Statement: We are an Equal Opportunity Employer. This Company is dedicated to both the letter and the spirit of the equal opportunity employment laws. All applicants and all employees will be evaluated on the basis of their ability, competence, and performance of the essential functions of their positions. There will be no discrimination on the basis of race, sex, national origin, religion, age 40 and over, disability, sexual orientation, marital status, or any other classification which may be protected by federal, state, or local laws. In compliance with the Americans with Disabilities Act, we specifically offer equal opportunity for all employees or job applicants who may have a physical or mental disability. Such persons will be hired on the basis of their ability to perform the essential functions of the job in question. Likewise, their work will be evaluated on their performance of these essential functions. We will offer reasonable accommodation to individuals with disabilities, to the extent that Company resources allow without undue hardship. As part of our equal employment policy, there will be no wage differentials based on gender, between men and women employed in the same establishment, on jobs that require equal skill, effort, and responsibility, and which are performed under similar working conditions

Job DescriptionClinica Sierra Vista is excited to be one of the largest Federally Qualified Health Centers in the Nation! We’re honored to serve the men and women of the fields. We also offer care and support to the inner city, the rural and isolated, those of low, moderate, and fixed incomes, and families from an array of cultural backgrounds who speak several languages. We don’t inquire about immigration status because we simply don’t need to know. If you come to us, we will treat you like any other patient. As we grow our team, we are looking for individuals who believe the patient is always #1. Why work for us? • Competitive pay which matches your abilities and experience, • Health coverage for you and your family, • Generous number of vacation days per year, • A robust wellness plan and health club discounts, • Continuing education assistance to grow and further your talents, • 403(B) plan with company matching Intrigued? We’d love to hear from you! Please review the job details below and then click “apply.” We're looking for someone to join our team as a Laboratory Specialist who: Under the direction of the Associate Director of Nursing, the Laboratory Specialist is responsible for knowledge of all point of care testing. The Laboratory Specialist provides technical resources and direction to nurses and medical assistants regarding lab policies, procedures, and regulatory requirements. The Laboratory Specialist will be familiar with CLIA performance regulations and take the lead role during regulatory audits. Essential Functions: • Promotes the mission, vision, and values of Clinica Sierra Vista., • Acts as a liaison for CSV with multiple lab vendors and other partnering agencies., • Create and deactivate multiple lab vendor accounts for CSV staff., • Disseminates lab educational programs, courses and other content based on lab vendor, regulatory and legal updates., • Collaborates with nursing department to update waived testing policies and procedures using current standards to maintain compliance., • Collaborates with nursing educator to implement updated waived testing procedures and policies., • Collaborates with interdisciplinary departments to ensure patients are receiving safe, high-quality care., • Monitors lab vendor electronic trailers and coding related issues for completion and submission of data needed., • Report and resolve vendor related issues to multiple interdisciplinary departments., • Participates in infection control programs and regulatory audits., • Assist nursing with the ordering, inventory, and inspection of material to assure the valid dates of use., • After consulting the ADON, appropriately destroys or repurpose outdated supplies as required by state licenses, common practices, and procedures. Assist in receiving, identifying, accessioning, processing, and transporting of specimens and testing equipment when necessary., • Coordinates with nursing department and vendors to provide resolution regarding specimens in question or tests not performed. Keeps current with methods, trends, technology, or other topics pertaining to local, state, and federal CLIA Waived Testing and lab requirements., • Work closely with Health IT and Billing Director to ensure appropriate Lab CPT Codes in E.H.R. system., • Reports and reconciles labs ordered vs labs resulted. Collaborates with nursing department on emergency preparations, including plans for ensuring safety of controls and lab specimens during emergencies., • Maintains work area in safe, aseptic, and organized manner., • Maintains enrollment status of CSV health centers with lab vendor(s) as needed., • Reasonable and predictable in person attendance., • Other duties as assigned. You'll be successful with the following qualifications: • Medical Assistant or Licensed Vocational Nurse with over 3 years of lab experience acquired through a Federally Qualified Health Center performing CLIA Waived Testing and lab ordering and/or processing preferred., • Knowledgeable CLIA Waived laboratory equipment, operation, maintenance, and performance of such equipment., • Phlebotomy Certification (PBT) preferred., • BLS certification required., • Ability to communicate professionally and effectively both orally and written., • Possess clinical knowledge of CLIA Waived Testing and lab ordering and/or processing standards and applicable policies., • Experience with EHR systems Ability to establish and maintain effective and cooperative working relationships with staff and others contacted in daily activities., • Ability to complete task within established time limits., • Ability to effectively prioritize multiple task and deadlines., • Valid California driver’s license, auto insurance, and personal transportation. Clinica Sierra Vista values human rights, goodwill, respect, inclusivity, equality, and recognizes that the organization derives its strength from a rich diversity of thoughts, ideas, and contributions. As leaders in healthcare industry, we aspire to be an employer of choice by promoting an organizational culture that reflects these core values. We seek to attract, develop, and retain a talented and dedicated workforce where people of diverse races, genders, religions, cultures, political affiliations and lifestyles thrive. Our goal is to create a welcoming and inclusive environment that empowers our employees to provide the highest level of service to our community of residents and businesses; they’re counting on us. Clinica Sierra Vista is an equal opportunity employer and strives to attract qualified applicants from all walks of life without regard to race, color, ethnicity, religion, national origin, age, sex, sexual orientation, gender identity, gender expression, marital status, ancestry, physical disability, mental disability, medical condition, genetic information, military and veteran status, or any other status protected under federal, state and/or local law. We aim to create an environment that celebrates and embraces the diversity of our workforce. We welcome you to join our team!

Job DescriptionToyota Maintenance Service AdvisorAbout Us If you're looking for an opportunity to be appreciated and grow your career, then your search is complete. At Blackstone Toyota, we have a long history of providing outstanding career opportunities for motivated, energetic individuals who are passionate about delivering exceptional customer service. We believe our employees are the foundation of our success and are committed to providing the training, support, and opportunities needed to build a rewarding career. Benefits • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Retirement Plan, • Paid Time Off, • Opportunities for Advancement, • Employee DiscountsPosition Summary Blackstone Toyota is seeking a motivated and customer-focused Maintenance Service Advisor to join our service team. This position is responsible for creating an exceptional customer experience by greeting guests, assisting with their vehicle maintenance needs, providing maintenance recommendations, and guiding customers throughout the service process from check-in to vehicle delivery. The ideal candidate is organized, dependable, works well in a fast-paced environment, and enjoys working as part of a team. Responsibilities • Greet customers promptly and professionally upon arrival., • Assist customers with scheduled maintenance and service recommendations., • Educate customers on Toyota factory maintenance requirements and available services., • Review and explain Multi-Point Inspection (MPI) results with customers., • Present maintenance recommendations and additional services based on vehicle condition., • Keep customers informed throughout the repair process with timely updates., • Coordinate with technicians to ensure accurate communication and efficient workflow., • Close repair orders, process payments, and complete the customer checkout process., • Ensure all repair orders and documentation meet Toyota and company standards., • Build long-term relationships by providing outstanding customer service., • Maintain a clean, organized, and professional work environment., • Work closely with fellow advisors, technicians, and support staff to achieve department goals.Qualifications, • Previous automotive service advisor or customer service experience preferred., • Toyota experience is a plus but not required., • Excellent customer service and communication skills., • Strong sales and upselling abilities while maintaining a customer-first approach., • Ability to multitask and stay organized in a fast-paced environment., • Strong attention to detail and accuracy with paperwork and documentation., • Positive attitude and team-oriented mindset., • Self-motivated with excellent time management skills., • Reliable attendance and punctuality are required., • Available to work flexible hours, including Saturdays., • Professional appearance and demeanor., • Valid driver's license with a clean driving record.Why Join Blackstone Toyota? At Blackstone Toyota, we invest in our employees and promote from within whenever possible. If you're looking for a career with opportunities for growth, enjoy helping customers, and thrive in a fast-paced environment, we'd love to hear from you.

Job Description About the Role About the Role Interested in joining us? We’re hiring for several roles with a July 2026 start date, and we’ll be reviewing applications and scheduling interviews in the coming weeks.What Makes You Successful in This Role Responsibilities Vehicle Diagnostics & Repair Maintenance Operations & Quality Control Safety & Compliance Qualifications Basic Qualifications: Preferred Qualifications: You should be proficient in: • Diesel & Heavy Equipment Systems, • DOT & Equipment Inspection Compliance

Job DescriptionSalary: $31.02 - $43.65 DEFINITION: Under varying degrees of direction, performs a variety of office and field duties including planning, design and coordinating construction and maintenance of District facilities; develops construction plans and drawings; prepares reports, easements, contract documents and other engineering documents, provide assistance to other engineering staff, customers, construction personnel, outside agencies and others as necessary; and performs other related duties as required. DISTINGUISHING CHARACTERISTICS: Engineering Technician I: This is the entry-journey level class of the Engineering Technician series. Incumbents work under immediate supervision performing assigned tasks. Incumbents may have a limited job related experience, are trained on the job; and as they gain more experience, incumbents are assigned tasks requiring some degree of independent initiate and judgment. Employee must successfully complete Level I Core Values training. Engineering Technician II: This is the intermediate-journey level class of the Engineering Technician series. Incumbents are distinguished from the Engineering Technician I by performing assigned tasks requiring some degree of independent initiative and judgment but still working under immediate supervision. To qualify for this position, employee must have successfully completed Level I Core Values training and consistently demonstrated FID Core Values in the workplace. Incumbent must successfully complete Level II Core Values training. Engineering Technician III: This is the advanced-journey level class of the Engineering Technician series. Incumbents are distinguished from the Engineering Technician II by performing assigned tasks requiring a high degree of technical knowledge, supervisory ability, independent initiative and judgment. Incumbents at this level require only occasional instruction or assistance as new or unusual situations arise; and are fully aware of the operating procedures and policies of the District. To qualify for the III position, incumbent must have successfully completed Level II Core Values training and consistently demonstrated FID Core Values in the workplace. As an Engineering Technician III, incumbent must successfully complete Level III Core Values training. SUPERVISION EXERCISED: This position does not supervise. However, all employees are expected to orientate, train, and assist other employees within the department and general office. EXAMPLES OF DUTIES: The duties listed below represent the various types of work and essential functions that may be performed. The omission of specific statements of duties does not exclude them if the work is related or a logical assignment to this class. • Developer/agency reviews:, • Respond to public agency reviews, including reviewing and responding to city/county development projects; reviews parcel maps, conditional use permits, environmental impact reports, public right of way vacations, etc., • Provide assistance and coordination to other engineering staff, customers, construction personnel, municipalities, consulting engineers, utilities and other entities in matters relating to District facilities. Provide feedback and evaluation of project designs, reports, specifications, and recommendations from third-party engineering companies., • Review construction plans, contract specifications, cost estimates, agreements and documents developed by the Developer, or Agency, or Consultant., • Prepare reports, easements, contract documents, and other engineering documents., • Evaluate and coordinate engineering and administration of construction between utilities, engineering firms, developers, and agencies., • Developer/agency construction projects:, • Inspect construction and maintenance projects for conformity to construction plans and District standards., • Manage developer/agency projects., • Coordinates with other departments., • Landowner Projects:, • Prepare and/or review construction plans, contract specifications, cost estimates, agreements and documents developed by the landowner/grower., • Surface and Ground Water, • Groundwater and surface water sampling., • Prepare water quality and groundwater reports., • Monitoring well network measurements (including coordination with other Engineering staff and NKGSA for data management)., • Monitoring well data logger operation and maintenance., • Implement banking facility monitoring plan, including coordination with consultant and other District departments., • General, • Serve as a right of way agent protecting the Districts rights of way and easements., • Research District and other agency agreements., • Prepare/coordinate legal descriptions, District agreements and easements., • Review encroachments and prepare response letters., • Handle developer, grower, realtor, and other public inquiries over the phone and at the counter., • Coordinate FID pipeline location services., • Prepare and issue FID permits for third parties, • Represents the District at various meetings and before various state and local agencies., • Assists in general data gathering and analysis., • Assist District Engineers with development of construction drawings, specifications, and exhibits., • Surveying, • Conduct field surveys, review field data, and incorporate data into construction drawings., • Inspection, • Assists in the completion of construction diaries and record-keeping pertaining to District construction projects and provides record drawing information to Project Manager/Chief Engineer for permanent record., • Interprets construction plans and specifications in accordance with District standards, and verifies construction is consistent with plans and specifications., • Assists in the inspection and recommendation of maintenance or repair of District facilities., • Conduct inspections including agency, developer, and District projects., • Perform other duties as assigned. EMPLOYMENT STANDARDS: Education, Training, and Experience: Any combination of experience and education that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Education Engineering Technician III position requires an Associates degree or equivalent from an accredited vocational school, college or university with major course work in mathematics, engineering, and/or drafting. Equivalent course work in related fields may be considered for the Engineering Technician III position; High School diploma or equivalent required for the Engineering Technician I and II positions. Training Engineering Technician I: Must have knowledge of mathematics including algebra; modern office procedures, computer programs and applications software. Must have the ability to prepare and maintain accurate records and files; prepare basic construction estimates, prepare reports and correspondence; read and prepare maps and engineering plans; and perform groundwater well measurements, survey assistance, and other field-related tasks. Engineering Technician II: In addition to the qualifications for the Engineering Technician I, incumbent must have knowledge of: trigonometry and geometry; engineering drafting methods and procedures (manual and computer based); contracts and agreements; nomenclature, symbols, methods, practices, techniques and instruments used in engineering, mapping and drafting; basic principles of hydraulic engineering; and methods and equipment related to surveying; rights-of-way and real estate law relating to easement and encroachment; incumbent must have ability to interpret policies, rules and procedures; prepare written documents incorporating information from engineering and other departments; prepare basic engineering plans; and read and interpret legal descriptions and maintain accurate records and files; prepare reports and correspondence; prepare complex estimates, and read and prepare maps and engineering plans. Engineering Technician III: In addition to the qualifications for the Engineering Technician II, must have knowledge of: land survey methods, equipment, and techniques; principles of designing and constructing irrigation structures; must have ability to prepare complex written documents incorporating information from engineering and other departments; and write legal descriptions; operate and adjust survey equipment; prepare complex reports and correspondence; prepare complex budgetary and financial reports, prepare recommendations and plans to implement decisions; and read and prepare complex maps and engineering plans. Experience Technician I - Two (2) years of related technical or construction experience. Technician II - Four (4) years of related technical and construction experience. Technician III - Six (6) years of related technical and construction experience. An associates degree with major course work in mathematics, engineering, and/or drafting may count towards the required years of experience. Licenses and Certificates: Possession of a valid California class C drivers license may be required at the time of appointment. Failure to obtain or maintain such required license(s) may be cause for disciplinary action. Individuals who do not meet this requirement due to physical disability will be considered for accommodation on a case-by-case basis. Possession and proof of a good driving record as evidenced by freedom from multiple or serious traffic violations or accidents for at least two (2) years duration. The driving record will not contribute to an increase in the Districts automobile rates. One way to achieve competence at all three Technician levels is obtaining inspection credentials through a reputable source, to be determined by the department head. Knowledge of: • Mathematics including algebra, trigonometry, and geometry., • Basic principles of hydraulic engineering., • Principles of designing and constructing irrigation structures., • Modern office procedures, computer programs and applications software., • Proficiency in Microsoft Office suite of software with emphasis in Excel, Word, PowerPoint, and Outlook., • Contracts and agreements., • Rights of way and real estate law relating to easement and encroachment., • Legal descriptions of land easements., • Land survey methods, equipment, and techniques., • Nomenclature, symbols, methods, practices, procedures, techniques and instruments used in engineering, mapping and drafting., • Issues affecting water districts., • Groundwater well construction and related measurement tools/dataloggers. Ability to: • Prepare and maintain accurate records and files., • Prepare construction estimates, • Read, interpret, and/or prepare engineering plans and specifications., • Read and prepare maps., • Proficient in computer aided drafting. Ability to use GIS software to develop basic maps., • Prepare complex reports and correspondence, which may include information from Engineering and other departments., • Read, interpret, and/or prepare legal descriptions., • Interpret policies, rules and procedures., • Operate and maintain land survey equipment., • Operate and maintain groundwater well measurement tools and systems., • Prepare recommendations to assist with decision making., • Handle and deescalate difficult/confrontational situations., • Interact with the general public, contractors, and agencies. Physical and Mental Standards The physical and mental demands described here are representative of those that must be met by employees to successfully perform the essential functions of this class. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Travels frequently by motor vehicle in conducting and coordinating surveys and other District business., • Communicates verbally with management, co-workers, and the public in face to face, one on one and group settings., • Regularly uses a telephone for communication., • Uses office equipment such as computers, tablets, plotters, and copy machines., • Frequently walks on uneven terrain, in an outdoor environment, in varied weather conditions, conducting field reconnaissance, meetings, and engineering surveys., • Occasionally required to climb, balance, stoop, kneel, crouch, or crawl., • Sits for extended periods of time., • Walk for extended distances., • Hearing within normal ranges., • Operates field survey instruments requiring acute vision and excellent eye-hand coordination., • Regularly lift and/or move up to 10 pounds, occasionally lift or move up to 40 pounds. Other Conditions of Employment: • Employee will follow all safety rules., • Employee will observe and follow all District policies and regulations., • Employee will report to work at the appointed time for each day he or she is scheduled to work., • During paid work time, employee will perform all work tasks and responsibilities to the best of his or her ability with the focus on quality and timely completion., • Employee will work cooperatively with co-workers and supervisors. TYPICAL WORKING CONDITIONS: Work is performed both in an office environment and in the field.

Job Description Build Your Career at Foundation Repair of CA Foundation Repair of CA, a leader in the foundation, crawl space, and concrete repair industry, is expanding its outside sales team. We’re on a mission to help more homeowners by delivering a remarkable contractor experience at scale. This position allows you to help homeowners fix and protect their most valuable asset—their home—and strengthen community infrastructure the right way. About the Role As an Outside Sales Representative, you will meet with homeowners through pre-scheduled appointments. Your goal is to uncover the customer’s needs, diagnose foundation or concrete issues, recommend the best repair solutions, and guide them toward making confident, informed buying decisions. Top performers in our industry can earn $200K or more annually while helping provide permanent, creative repair solutions. What We Provide • $700 per month vehicle fuel allowance, • Training base pay during onboarding and business ramp-up period, • High-quality, warm leads — no cold calling, • Dedicated inside sales support to help close sales, • Comprehensive benefits package including medical, dental, vision, and 401(k), • Best-in-class training, including manufacturer-led sessions and cutting-edge software tools • A trusting, respectful, and fun company culture, • A company you’ll be proud to represent — one of the top authorized Supportworks dealers by sales volume, with a 4-star average rating across Yelp, Home Advisor, and Google Reviews • Professional growth opportunities within a growing organization What We’re Looking For • 1+ years of experience in residential real estate, home inspection, construction, concrete, or home improvement industries (preferred but not required) • 2+ years of in-home sales experience (preferred but not required), • Strong listening, closing, follow-up, and self-marketing skills, • Ability to walk, kneel, and crawl in confined spaces, • Valid driver’s license, safe driving record, and ability to obtain a CSLB Home Improvement Salesperson card (background check required) • Reliable personal vehicle for sales appointments, • Proficiency using tablet-based software (training provided), • Comfort and confidence working on a 100% commission-based pay structure Our Purpose Our purpose is to redefine what it means to work with a contractor by creating a truly remarkable experience for every customer. Just as importantly, we walk alongside our team members, redefining what it means to work together as One Team. We care deeply about people — building genuine relationships, supporting one another’s growth, and making lasting connections. For more information, visit: www.foundationrepairofca.com Company DescriptionAt Foundation Repair of CA, we are motivated as "One Team" to redefine the construction industry by pushing beyond the status quo and constantly surpassing new challenges. If you are a natural leader, who likes hard work while maintaining the highest dedication to the customer then apply today and join our team and test your limits as a leader.At Foundation Repair of CA, we are motivated as "One Team" to redefine the construction industry by pushing beyond the status quo and constantly surpassing new challenges. If you are a natural leader, who likes hard work while maintaining the highest dedication to the customer then apply today and join our team and test your limits as a leader.

Job Description 1. Represent the Company in a professional and courteous manner in all interactions with client/patients., 2. Deliver and set up respiratory therapy (RT) equipment, including (but not limited to) oxygen therapy, CPAP/BIPAP, nebulization therapy, apnea monitoring, suctioning, and ventilation., 3. Demonstrate the use of RT equipment in the client/patient's home, and ensure that the client/patient and/or caregiver demonstrate knowledge of proper operation of the equipment., 4. Provide ongoing client visits for RT equipment maintenance and revisions to Plan of Care., 5. Pick up and clean RT equipment as needed., 6. Assist in resolving RT equipment problems under emergency conditions when appropriate., 7. Assume on-call responsibilities in accordance with Company policy., 8. Complete appropriate documentation of client visits, including reports as needed to physicians with regard to client/patient clinical progress., 9. Perform routine preventive maintenance and simple repairs on RT equipment as required; arrange for repair by manufacturer when necessary., 10. Report RT equipment hazards and/or product incidents as required in compliance with Company policy. 11 Participate in surveys conducted by authorized inspection agencies. 1. Participate in the Company's Performance Management program as requested by the Performance Management Coordinator., 2. Participate in Company committees when requested., 3. Pursue continuing education programs appropriate to job responsibilities., 4. Perform other duties as assigned by Chief Executive Officer (CEO)

Job Description Build Your Career at Foundation Repair of CA Foundation Repair of CA, a leader in the foundation, crawl space, and concrete repair industry, is expanding its outside sales team. We’re on a mission to help more homeowners by delivering a remarkable contractor experience at scale. This position allows you to help homeowners fix and protect their most valuable asset—their home—and strengthen community infrastructure the right way. About the Role As an Outside Sales Representative, you will meet with homeowners through pre-scheduled appointments. Your goal is to uncover the customer’s needs, diagnose foundation or concrete issues, recommend the best repair solutions, and guide them toward making confident, informed buying decisions. Top performers in our industry can earn $200K or more annually while helping provide permanent, creative repair solutions. What We Provide • $700 per month vehicle fuel allowance, • Training base pay during onboarding and business ramp-up period, • High-quality, warm leads — no cold calling, • Dedicated inside sales support to help close sales, • Comprehensive benefits package including medical, dental, vision, and 401(k), • Best-in-class training, including manufacturer-led sessions and cutting-edge software tools • A trusting, respectful, and fun company culture, • A company you’ll be proud to represent — one of the top authorized Supportworks dealers by sales volume, with a 4-star average rating across Yelp, Home Advisor, and Google Reviews • Professional growth opportunities within a growing organization What We’re Looking For • 1+ years of experience in residential real estate, home inspection, construction, concrete, or home improvement industries (preferred but not required) • 2+ years of in-home sales experience (preferred but not required), • Strong listening, closing, follow-up, and self-marketing skills, • Ability to walk, kneel, and crawl in confined spaces, • Valid driver’s license, safe driving record, and ability to obtain a CSLB Home Improvement Salesperson card (background check required) • Reliable personal vehicle for sales appointments, • Proficiency using tablet-based software (training provided), • Comfort and confidence working on a 100% commission-based pay structure Our Purpose Our purpose is to redefine what it means to work with a contractor by creating a truly remarkable experience for every customer. Just as importantly, we walk alongside our team members, redefining what it means to work together as One Team. We care deeply about people — building genuine relationships, supporting one another’s growth, and making lasting connections. For more information, visit: www.foundationrepairofca.com Company DescriptionAt Foundation Repair of CA, we are motivated as "One Team" to redefine the construction industry by pushing beyond the status quo and constantly surpassing new challenges. If you are a natural leader, who likes hard work while maintaining the highest dedication to the customer then apply today and join our team and test your limits as a leader.At Foundation Repair of CA, we are motivated as "One Team" to redefine the construction industry by pushing beyond the status quo and constantly surpassing new challenges. If you are a natural leader, who likes hard work while maintaining the highest dedication to the customer then apply today and join our team and test your limits as a leader.