Trabajos inspection en San Bernardino, CaliforniaCrear alertas

Job Description Job Title: Manufacturing General Laborer 2nd Shift 2:30pm- 11pm Job Description This general labor position focuses on performing quality inspections on door hardware components produced by machines. You will visually inspect parts, take measurements, accurately count items, and document inspection results to ensure products meet established quality standards. Responsibilities • Perform visual quality inspections on door hardware pieces produced by machines., • Use measuring tools, including a tape measure, to verify product dimensions and specifications., • Accurately count parts and record quantities in logs or on required documentation., • Document inspection findings clearly and legibly according to established procedures., • Identify and separate defective or nonconforming parts based on inspection criteria., • Maintain a clean and organized work area to support efficient production and inspection., • Follow all safety guidelines and standard operating procedures while working on the production floor., • Sit or stand for extended periods while performing repetitive inspection and counting tasks., • Work collaboratively with production and inspection team members to meet quality and output goals. Essential Skills • Experience performing general labor or production work in a manufacturing or similar environment., • Ability to use a tape measure accurately for basic measurements., • Basic quality control skills, including visual inspection and measuring., • Strong attention to detail to identify defects and ensure accurate counts., • Ability to sit or stand for long periods of time while performing repetitive tasks., • Capability to complete basic documentation and record inspection results clearly. Additional Skills & Qualifications • Previous experience as a production worker or inspector in a hardware or manufacturing setting., • Comfort working in a small team environment., • Reliability and consistency in following established procedures and quality standards. Why Work Here? You will join a small, close-knit team where your attention to detail and reliability directly contribute to the quality of the final product. The environment offers the opportunity to develop hands-on experience in quality inspection and production, with clear procedures and expectations that support success in the role. Work Environment This role is based in a small hardware production facility with a team of approximately nine people. The work is performed on-site in a production and inspection area, requiring extended periods of sitting or standing while inspecting, counting, and documenting door hardware pieces. The facility operates on a 1st and 2nd shift schedule, and you will work closely with a tight-knit team in a structured, task-focused environment. Job Type & Location This is a Contract to Hire position based out of Fontana, CA. Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fontana,CA. Application Deadline This position is anticipated to close on Jul 17, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Under direction of the Sous Chef, the Cook III (Specialty Cook) prepares specialty cuisine items for guest consumption on designated shifts. Utilize specialty skill sets in specific cuisine and uses only approved recipes, cooking methods and ingredients as set by Food & Beverage/Culinary Management. Maintains all food, equipment and kitchens to set health codes and casino standards. Maintains a positive, team oriented and accommodating attitude toward guests (internal as well as external), fellow team members and management at all times. Operates in representation of the culinary team’s best in class culture, while championing the goals and priorities of the Tribe in a manner that reflects and upholds the Tribal Community’s vision, mission and values. ESSENTIAL DUTIES AND RESPONSIBILITIES 1. Assists with maintaining designated workstation throughout all levels of business flow; ensures that recipes, flavor profiles, consistency in quality, appearance and production time frames are adhered to for all menu/food items being produced on assigned station; ensures food service lines are fully stocked for forecasted business flow and restock before end of shift., 2. Possesses an advanced knowledge of basic and specialty food products (meat, poultry, fish, produce, dry goods, etc.), and standard food production equipment; possesses excellent knife skills and is responsible for understanding and performing advance and specialized cooking methods. Responsible for multitasking within those basic cooking methods to ensure no interruption in servicing of the guests., 3. Possesses good understanding of the food rotation method “FIFO” and is directly responsible for ensuring labels and dating all food items on their designated stations as well as the kitchen as a whole. Ensures all food items are within expiration dates or if not that they are disposed of and properly logged on waste sheets. Possesses the ability to read recipes, production lists and any other necessary collateral paperwork, such as diagrams and logs, to be able to perform necessary duties as well as explain to and train cook staff on how to use these items efficiently., 4. Reports any injuries, accidents or possible unsafe work environment issues to management immediate when identified, at all times., 5. Performs other duties as assigned to support the efficient operation of the department. EDUCATIONAL, EXPERIENCE AND QUALIFICATIONS • High School Diploma or GED required., • Culinary arts degree from accredited school preferred., • Minimum five (5) years’ experience working in high-volume line cooking or production cooking in a full-service dining establishment or food service establishment required. KNOWLEDGE, SKILLS AND ABILITIES (KSA) • Demonstrates advance knowledge of food preparation and presentation., • Capable of following procedures and taking direction., • Possesses the ability to read recipes, production lists and any other necessary collateral paperwork, such as diagrams and logs, to be able to perform necessary duties. REQUIRED LICENSES, CERTIFICATIONS AND REGISTRATIONS • At the discretion of the San Manuel Tribal Gaming Commission, you may be required to obtain and maintain a gaming license., • Must obtain and maintain a Food Handler’s Card., • Select One of the Following for Driving Responsibilities: o No Driving Responsibilities: Role does not require a driver’s license or insurance. PHYSICAL REQUIREMENTS/ WORKING CONDITIONS – ENVIRONMENT The physical demands and working environment described here are representative of those that an employee encounters and must be met by an employee to successfully perform the essential functions of this job. • Primary work environment is in a climate-controlled commercial kitchen setting., • Work requires travel to attend meetings, trade shows, and conferences., • Incumbents may be required to work evening, weekend and holiday shifts., • Must be able to work in a fast-paced, high-demand environment., • Strength sufficient to exert up to 10 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects and/or move up to 40 pounds occasionally., • Sedentary work: involves sitting some of the time. Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine, and computer printer. • Physical activities that apply to the essential functions of the position are balancing, stooping, kneeling, crouching, reaching, pushing, pulling, lifting, grasping, talking, hearing, and repetitive motions., • Hearing sufficient to hear conversational levels in person, via videoconference and over the telephone., • Speech sufficient to make oneself heard and understood in person, in front of groups, in meetings, via videoconference and over the telephone. • Visual acuity that meets the requirements of the position: The worker is required to have close visual acuity to perform an activity such as preparing and analyzing data and figures; transcribing; viewing a computer terminal; expansive reading and visual inspection of employees, visitors or facility., • Mobility sufficient to safely move in an office environment, walk, stoop, bend and kneel, and enter, exit and operate a motor vehicle in the course of travel to promotional events, meetings, conferences, trade shows and San Manuel properties., • Endurance sufficient to sit, walk and stand for extended periods, and maintain efficiency throughout the entire work shift and during extended work hours., • Must present a neat, clean, and well-groomed appearance in accordance with departmental policy., • The employee may be exposed to fumes or airborne particles including secondhand smoke. Reasonable accommodation will be made in compliance with all applicable law.

Job Description --Come be an essential worker at E-Z Mix Inc.-- Interested candidates can complete an application onsite from 07:00am to 04:30pm Monday through Friday at: 3355 S. Industrial Dr. Rialto, Ca 92316 • please make sure to sign and date all of application and include job history or resume. General Plant Laborer Position Responsibilities: Perform a range of physical/manual labor duties including, but not limited to, equipment maintenance, pallet repair, loading and unloading, and other miscellaneous labor work as needed (including repetitive lifting and moving of 80+ pound objects). Perform general clean up around Plant, and maintains appearance of equipment. Completes visual and daily safety inspection of equipment to ensure safe operations. Other duties as assigned by Plant Management. Education: Other Related Experiences Required or Preferred: Minimum of one year of related experience or equivalent combination of education and experience. Ability to read, write and speak English. Must have the ability to understand and abide by Company policies and safety rules. Bilingual English/Spanish is highly preferred but, not required. Experience working in the building materials industry is preferred. · Must have the physical stamina to perform continuously with full body motion for climbing, reaching, pushing and lifting, etc. · Constant- Seeing, carrying, gripping objects under 20lbs. · Frequent- Bending, reaching, sitting, lifting objects under 20lbs. · Occasional- feeling, climbing, balancing, hearing, stooping, standing, walking, driving, twisting, hand tools. Pushing and pulling objects under 20 lbs. Carrying, lifting, pushing, pulling items from 20 lbs up to 94 lbs. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. E-Z Mix offers a competitive salary and excellent benefits. E-Z Mix is an Equal Opportunity Employer. Company DescriptionEstablished in 1995, E-Z Mix, Inc. is the leading producer of preblended, cementitious products in Southern California. Offering a full line of reputable products, from Spec Mix© masonry mortars to Riverside and CPC Cements, E-Z Mix prides itself in providing excellent customer service with a knowledgeable staff ready to assist you with any of your masonry needs.Established in 1995, E-Z Mix, Inc. is the leading producer of preblended, cementitious products in Southern California. Offering a full line of reputable products, from Spec Mix© masonry mortars to Riverside and CPC Cements, E-Z Mix prides itself in providing excellent customer service with a knowledgeable staff ready to assist you with any of your masonry needs.

Job Description Summary Our client is a leading retail general contractor delivering innovative, high-quality construction projects throughout California and the western United States. They are seeking an experienced Construction Superintendent to oversee field operations, coordinate subcontractors, and ensure projects are completed safely, on schedule, within budget, and in compliance with all quality and regulatory standards. The ideal candidate is a hands-on construction leader with experience in retail construction, remodels, hospitality, fuel stations, open-store remodels, or fast-food projects. This individual will possess strong leadership, organizational, and problem-solving skills, with the ability to manage multiple subcontractors, maintain project schedules, and drive successful project completion from start to finish. Duties & Responsibilities • Project Leadership & Site Management Manage and direct all job site activities from project startup through completion. Coordinate and supervise subcontractors, vendors, and field personnel to ensure work is completed safely, efficiently, and according to project specifications. Lead daily jobsite meetings with clients, subcontractors, inspectors, and project teams. Monitor project schedules and proactively address issues that may impact timelines or budgets. Oversee projects valued at $5M+ while maintaining quality, safety, and profitability goals. Step into existing projects when needed and effectively assume leadership responsibilities. • Construction Operations Review construction plans, specifications, and project documents daily. Conduct regular site walks to monitor progress, verify quality, and coordinate upcoming work. Create, submit, and track RFIs and change order requests. Coordinate inspections and ensure compliance with local building codes and project requirements. Ensure completed work is inspection-ready and meets quality standards. • Safety & Compliance Enforce company and OSHA safety standards on all projects. Conduct and participate in safety meetings and training programs. Hold subcontractors accountable for adhering to all safety procedures and regulations. Maintain accident-free job sites and proactively identify potential safety concerns. • Documentation & Reporting Utilize Procore to document project progress and maintain project records. Submit daily reports and communicate project updates to the project management team. Maintain accurate documentation of schedules, RFIs, inspections, change orders, and project milestones. Qualifications & Requirements • Construction Experience Minimum 5 years of experience as a Construction Superintendent. Minimum 3 years of recent experience in retail construction, retail remodels, hospitality, fuel stations, open-store remodels, or fast-food construction projects. Strong understanding of construction methods, sequencing, and scheduling. • Technical Skills Ability to read and interpret construction drawings, specifications, and project documents. Proficient with Microsoft Office Suite, including Outlook, Excel, Word, and Microsoft Project. Experience with Procore preferred. Strong mathematical skills, including material takeoffs and square footage calculations. • Leadership & Communication Proven ability to lead and motivate subcontractors and field teams. Strong organizational, problem-solving, and decision-making skills. Excellent communication skills with the ability to interact professionally with clients, inspectors, and project stakeholders. Ability to maintain accountability and drive projects to successful completion. • Certifications & Additional Requirements Valid California Driver’s License with a clean driving record. Reliable transportation required. OSHA 10 certification preferred. CPR certification preferred. Must be able to pass a background check. Willingness and ability to travel extensively, including overnight stays as required. • Physical Requirements Ability to lift up to 50 pounds. Ability to stand, walk, kneel, bend, climb, and perform general construction-related physical activities. Ability to work in active construction environments and varying weather conditions. Compensation & Benefits • Competitive salary based on experience., • Annual performance-based bonus opportunities., • Medical, dental, and vision insurance., • 401(k) retirement plan., • Vehicle allowance or company vehicle provided., • Gas card., • Company-issued cell phone., • Laptop and mobile hotspot., • Paid holidays., • Paid vacation., • Paid sick time.

CRST The Transportation Solution Inc. is one of the nation's largest transportation companies, providing total transportation solutions and comprehensive logistics services to customers all over North America. We are looking for CDL A Truck Drivers to run a Dedicated Account Regionally • CDL A Truck Drivers, • Dedicated Account, • Weekly Hometime, • CDL A Drivers Average $76,000 to $82,000 per year, • Weekly Payroll, • Some Drop and Hook, • Some Live unload at customer, • Safety first culture, • WorkStep– submit your anonymous feedback every week (optional), • Great Benefits! Medical, Dental and Vision, • $100 for every clean inspection CRST The Transportation Solution Inc. offers all our drivers the following benefits after 60 Days of Employment: • Major Medical, • Dental, • Vision, • Life Insurance and 401K, • All employees must enroll in benefits within 60 days of hire, • All benefits provide Nationwide coverage, • 21 years or older, • 6 Months of CDL A Experieince, • Qualified applicants with arrest and conviction records will be considered for employment pursuant to applicable federal, state, and local laws.

Job Summary: Provides nursing care to patients under the direction of a Registered Nurse of physician/advanced practice provider. Utilizes observational skills to observe nursing intervention and assists medical staff to insure optimal care within established policies, procedures, and standards. Under the direct supervision of a Registered Nurse or provider provides nursing care in accordance with the legal scope of practice and within established standards of care, policies, and procedures. Demonstrates performance consistent with the Mission, Vision, and Strategic Plan of the organization. Demonstrates quality and effectiveness in work habits and clinical practice and treats coworkers, patients, families, and all members of the health care team with dignity and respect. This position represents multiple openings in the San Bernardino Service Area. Essential Responsibilities: • Exhibits excellent customer relations with patients, visitors, providers, and co-workers; shows courtesy, compassion, and respect; conforms to the critical service standards established for the department., • Provides therapeutic patient care in accordance with the patients established by physician/advanced practice providers and/or a registered nurse within the scope of practice., • Transcribes physician/advanced practice providers orders and directed by policy., • Communicates directly with a registered nurse to institute changes in the plan of care; assists with and contributes to the development of a nursing care plan., • Administer specified medication appropriately and accurately following the providers order and or standing orders within scope of practice., • Executes treatments such as urinary catheterizations, placement of intravenous catheters, bladder irrigations and instillations, suctioning procedures, throat irrigations and enemas, and utilizing equipment as required. Adheres to infection prevention and control policies and procedures., • Adheres to high level of disinfectant, point of use, peel packs policies, and procedures., • Perform related patient care functions such as taking temperature, pulse, respiration and blood pressure readings, wound care, may instruct patient in various self-administered treatment or procedures; obtain specimens; assures correct culture collection., • Assist physician/advance practice providers or other medical staff personnel with examinations and treatments by selecting and passing instruments, providing support and restraint to the patient, draping, and other assistance as directed or required., • Within scope observes and documents patients condition by gathering signs, symptoms, and reactions to therapy, to identify unexpected and/or significant findings, initiates appropriate emergency procedures as necessary, and reports unusual conditions to the registered nurse/advanced practice providers as established by policy and procedure in a timely manner., • Collects and processes specimens per policy, procedures, guidelines, and protocols., • Provides non-0compoicated teaching following the registered nurse/advanced practice provider/physician plan for education. Report any identified learning needs and discharge barriers., • Ensures cleanliness of nursing module/station, patient exam room, and proper functioning of patient care equipment by visual inspection, routine testing, and other related methods. Provides a safe and therapeutic environment for patients and staff., • Utilizes effective verbal and non-verbal forms of communication., • Performs in other departments or modules to which assigned as required by the nursing/department administration to provide and maintain the established standards of care and safety., • Performs departmental back-office workflows including but not limited to proactive office encounter, successfully closing care gaps, patient outreach, access and/or nurse visits., • Participates in staff meetings, and in-service programs., • Assists in ordering and distribution/stocking of module/department supplies and equipment., • Accepts verbal and telephone orders from the physician/advanced practice providers., • Supports patient communication and message management including but not limited to patient emails, call center messages, and all other back-office messages., • Administers pulse oximetry, humidification therapy, spirometer, oxygen therapy via mask or nasal cannula, oral, nasal, and trach suctioning, and sputum induction., • Documents care in Health Connect per policy, procedures, guidelines, and protocols., • Performs other related duties as assigned and required, including orientation of new employees., • Assists in coordinating the discharge process., • Performs all job functions within license certification and scope of practice., • Promotes, ensures, and improves customer service to internal/external customers by demonstrating skills which are consistent with the organizations philosophy of providing extraordinary customer relations and quality service., • Consistently supports compliance and the Principles of Responsibilities (Kaiser Permanentes Code of Conduct) by maintaining the privacy and confidentiality of information, protecting the assets of the organization, acting with ethics and integrity, reporting non-compliance, and adhering to applicable federal, state, and local laws and regulations, accreditation, and licenser requirements (if applicable), and kaiser Permanentes policies and procedures., • Age Related Competencies: Skills assessments and validations are utilized to ensure that employees providing patient care to specific age groups (i.e., infants, adolescents, elderly, etc.) are proficient in identifying the special needs and behaviors associated with a particular patient population. Basic Qualifications: Experience • Minimum Six (6) months recent (in the last three (3) years) experience in direct patient care as an LVN (i.e., Skilled Nursing, Home Healthcare, Acute Care, or Clinical Medical Offices) Education • High School Diploma or GED. License, Certification, Registration • Vocational Nurse License (California), • Basic Life Support from American Heart Association Additional Requirements: • Extraordinary customer relations and quality service are critical to our success. We seek candidates who can demonstrate these skills and provide the highest quality of services to our health plan members. Preferred Qualifications: • IV Certification and Blood Withdrawal Certification preferred. Notes: • This is a temporary position for approximately six (6) months., • This position may be scheduled up to 40 hours weekly., • Variable hours & days worked., • May travel to outlying MOBs, community events, outreach events., • May travel to any location within the SBC Service Areas.

Job Summary: Provides nursing care to patients under the direction of a Registered Nurse of physician/advanced practice provider. Utilizes observational skills to observe nursing intervention and assists medical staff to insure optimal care within established policies, procedures, and standards. Under the direct supervision of a Registered Nurse or provider provides nursing care in accordance with the legal scope of practice and within established standards of care, policies, and procedures. Demonstrates performance consistent with the Mission, Vision, and Strategic Plan of the organization. Demonstrates quality and effectiveness in work habits and clinical practice and treats coworkers, patients, families, and all members of the health care team with dignity and respect. Essential Responsibilities: • Exhibits excellent customer relations with patients, visitors, providers, and co-workers; shows courtesy, compassion, and respect; conforms to the critical service standards established for the department., • Provides therapeutic patient care in accordance with the patients established by physician/advanced practice providers and/or a registered nurse within the scope of practice., • Transcribes physician/advanced practice providers orders and directed by policy., • Communicates directly with a registered nurse to institute changes in the plan of care; assists with and contributes to the development of a nursing care plan., • Administer specified medication appropriately and accurately following the providers order and or standing orders within scope of practice., • Executes treatments such as urinary catheterizations, placement of intravenous catheters, bladder irrigations and instillations, suctioning procedures, throat irrigations and enemas, and utilizing equipment as required. Adheres to infection prevention and control policies and procedures., • Adheres to high level of disinfectant, point of use, peel packs policies, and procedures., • Perform related patient care functions such as taking temperature, pulse, respiration and blood pressure readings, wound care, may instruct patient in various self-administered treatment or procedures; obtain specimens; assures correct culture collection., • Assist physician/advance practice providers or other medical staff personnel with examinations and treatments by selecting and passing instruments, providing support and restraint to the patient, draping, and other assistance as directed or required., • Within scope observes and documents patients condition by gathering signs, symptoms, and reactions to therapy, to identify unexpected and/or significant findings, initiates appropriate emergency procedures as necessary, and reports unusual conditions to the registered nurse/advanced practice providers as established by policy and procedure in a timely manner., • May volunteer to start and maintain intravenous flow rate with Certifications, notifies registered nurse/advanced practice/physician of any problems. May discontinue IV therapy except intra-cath and central venous lines., • May volunteer to start perform venipuncture/blood withdrawal with Certifications., • Collects and processes specimens per policy, procedures, guidelines, and protocols., • Provides non-compoicated teaching following the registered nurse/advanced practice provider/physician plan for education. Report any identified learning needs and discharge barriers., • Ensures cleanliness of nursing module/station, patient exam room, and proper functioning of patient care equipment by visual inspection, routine testing, and other related methods. Provides a safe and therapeutic environment for patients and staff., • Utilizes effective verbal and non-verbal forms of communication., • Performs in other departments or modules to which assigned as required by the nursing/department administration to provide and maintain the established standards of care and safety., • Performs departmental back-office workflows including but not limited to proactive office encounter, successfully closing care gaps, patient outreach, access and/or nurse visits., • Participates in staff meetings, and in-service programs., • Assists in ordering and distribution/stocking of module/department supplies and equipment., • Accepts verbal and telephone orders from the physician/advanced practice providers., • Supports patient communication and message management including but not limited to patient emails, call center messages, and all other back-office messages., • Administers pulse oximetry, humidification therapy, spirometer, oxygen therapy via mask or nasal cannula, oral, nasal, and trach suctioning, and sputum induction., • Documents care in Health Connect per policy, procedures, guidelines, and protocols., • Performs other related duties as assigned and required, including orientation of new employees., • Assists in coordinating the discharge process., • Performs all job functions within license certification and scope of practice., • Promotes, ensures, and improves customer service to internal/external customers by demonstrating skills which are consistent with the organizations philosophy of providing extraordinary customer relations and quality service., • Consistently supports compliance and the Principles of Responsibilities (Kaiser Permanentes Code of Conduct) by maintaining the privacy and confidentiality of information, protecting the assets of the organization, acting with ethics and integrity, reporting non-compliance, and adhering to applicable federal, state, and local laws and regulations, accreditation, and licenser requirements (if applicable), and kaiser Permanentes policies and procedures., • Age Related Competencies: Skills assessments and validations are utilized to ensure that employees providing patient care to specific age groups (i.e., infants, adolescents, elderly, etc.) are proficient in identifying the special needs and behaviors associated with a particular patient population. Basic Qualifications:Experience • Minimum Twelve (12) months or greater LVN direct patient care experience within the last three (3) years. Direct patient care experience may include medical office, acute care, home care services, and skilled nursing facility.Education, • High School Diploma or GEDLicense, Certification, Registration Vocational Nurse License (California) • Basic Life Support Additional Requirements: • Extraordinary customer relations and quality service are critical to our success., • We seek candidates who can demonstrate these skills and are dedicated to providing the highest quality of service to our health plan members. Bilingual (English/Spanish) Level II required. Preferred Qualifications: • IV Certification and Blood Withdrawal Certification preferred. Notes: • May travel to CSI Clinic Must successfully pass or have passed the bilingual test (within the last 12 months), or be active in the QBS program.

Job Summary: Provides nursing care to patients under the direction of a Registered Nurse of physician/advanced practice provider. Utilizes observational skills to observe nursing intervention and assists medical staff to insure optimal care within established policies, procedures, and standards. Under the direct supervision of a Registered Nurse or provider provides nursing care in accordance with the legal scope of practice and within established standards of care, policies, and procedures. Demonstrates performance consistent with the Mission, Vision, and Strategic Plan of the organization. Demonstrates quality and effectiveness in work habits and clinical practice and treats coworkers, patients, families, and all members of the health care team with dignity and respect. Essential Responsibilities: • Exhibits excellent customer relations with patients, visitors, providers, and co-workers; shows courtesy, compassion, and respect; conforms to the critical service standards established for the department., • Provides therapeutic patient care in accordance with the patients established by physician/advanced practice providers and/or a registered nurse within the scope of practice., • Transcribes physician/advanced practice providers orders and directed by policy., • Communicates directly with a registered nurse to institute changes in the plan of care; assists with and contributes to the development of a nursing care plan., • Administer specified medication appropriately and accurately following the providers order and or standing orders within scope of practice., • Executes treatments such as urinary catheterizations, placement of intravenous catheters, bladder irrigations and instillations, suctioning procedures, throat irrigations and enemas, and utilizing equipment as required. Adheres to infection prevention and control policies and procedures., • Adheres to high level of disinfectant, point of use, peel packs policies, and procedures., • Perform related patient care functions such as taking temperature, pulse, respiration and blood pressure readings, wound care, may instruct patient in various self-administered treatment or procedures; obtain specimens; assures correct culture collection., • Assist physician/advance practice providers or other medical staff personnel with examinations and treatments by selecting and passing instruments, providing support and restraint to the patient, draping, and other assistance as directed or required., • Within scope observes and documents patients condition by gathering signs, symptoms, and reactions to therapy, to identify unexpected and/or significant findings, initiates appropriate emergency procedures as necessary, and reports unusual conditions to the registered nurse/advanced practice providers as established by policy and procedure in a timely manner., • May volunteer to start and maintain intravenous flow rate with Certifications, notifies registered nurse/advanced practice/physician of any problems. May discontinue IV therapy except intra-cath and central venous lines., • May volunteer to start perform venipuncture/blood withdrawal with Certifications., • Collects and processes specimens per policy, procedures, guidelines, and protocols., • Provides non-compoicated teaching following the registered nurse/advanced practice provider/physician plan for education. Report any identified learning needs and discharge barriers., • Ensures cleanliness of nursing module/station, patient exam room, and proper functioning of patient care equipment by visual inspection, routine testing, and other related methods. Provides a safe and therapeutic environment for patients and staff., • Utilizes effective verbal and non-verbal forms of communication., • Performs in other departments or modules to which assigned as required by the nursing/department administration to provide and maintain the established standards of care and safety., • Performs departmental back-office workflows including but not limited to proactive office encounter, successfully closing care gaps, patient outreach, access and/or nurse visits., • Participates in staff meetings, and in-service programs., • Assists in ordering and distribution/stocking of module/department supplies and equipment., • Accepts verbal and telephone orders from the physician/advanced practice providers., • Supports patient communication and message management including but not limited to patient emails, call center messages, and all other back-office messages., • Administers pulse oximetry, humidification therapy, spirometer, oxygen therapy via mask or nasal cannula, oral, nasal, and trach suctioning, and sputum induction., • Documents care in Health Connect per policy, procedures, guidelines, and protocols., • Performs other related duties as assigned and required, including orientation of new employees., • Assists in coordinating the discharge process., • Performs all job functions within license certification and scope of practice., • Promotes, ensures, and improves customer service to internal/external customers by demonstrating skills which are consistent with the organizations philosophy of providing extraordinary customer relations and quality service., • Consistently supports compliance and the Principles of Responsibilities (Kaiser Permanentes Code of Conduct) by maintaining the privacy and confidentiality of information, protecting the assets of the organization, acting with ethics and integrity, reporting non-compliance, and adhering to applicable federal, state, and local laws and regulations, accreditation, and licenser requirements (if applicable), and kaiser Permanentes policies and procedures., • Age Related Competencies: Skills assessments and validations are utilized to ensure that employees providing patient care to specific age groups (i.e., infants, adolescents, elderly, etc.) are proficient in identifying the special needs and behaviors associated with a particular patient population. Basic Qualifications:Experience • Minimum Twelve (12) months or greater LVN direct patient care experience within the last three (3) years. Direct patient care experience may include medical office, acute care, home care services, and skilled nursing facility.Education, • High School Diploma or GEDLicense, Certification, Registration Vocational Nurse License (California) • Basic Life Support Additional Requirements: • Extraordinary customer relations and quality service are critical to our success., • We seek candidates who can demonstrate these skills and are dedicated to providing the highest quality of service to our health plan members., • Preferred Qualifications:, • IV Certification and Blood Withdrawal Certification preferred. Notes:\ • Will work multiple locations: Redlands, Fontana, or Victorville This is a temporary position for approximately for 6 months

Job Summary: Provides nursing care to patients under the direction of a Registered Nurse of physician/advanced practice provider. Utilizes observational skills to observe nursing intervention and assists medical staff to insure optimal care within established policies, procedures, and standards. Under the direct supervision of a Registered Nurse or provider provides nursing care in accordance with the legal scope of practice and within established standards of care, policies, and procedures. Demonstrates performance consistent with the Mission, Vision, and Strategic Plan of the organization. Demonstrates quality and effectiveness in work habits and clinical practice and treats coworkers, patients, families, and all members of the health care team with dignity and respect. Essential Responsibilities: • Exhibits excellent customer relations with patients, visitors, providers, and co-workers; shows courtesy, compassion, and respect; conforms to the critical service standards established for the department., • Provides therapeutic patient care in accordance with the patients established by physician/advanced practice providers and/or a registered nurse within the scope of practice., • Transcribes physician/advanced practice providers orders and directed by policy., • Communicates directly with a registered nurse to institute changes in the plan of care; assists with and contributes to the development of a nursing care plan., • Administer specified medication appropriately and accurately following the providers order and or standing orders within scope of practice., • Executes treatments such as urinary catheterizations, placement of intravenous catheters, bladder irrigations and instillations, suctioning procedures, throat irrigations and enemas, and utilizing equipment as required. Adheres to infection prevention and control policies and procedures., • Adheres to high level of disinfectant, point of use, peel packs policies, and procedures., • Perform related patient care functions such as taking temperature, pulse, respiration and blood pressure readings, wound care, may instruct patient in various self-administered treatment or procedures; obtain specimens; assures correct culture collection., • Assist physician/advance practice providers or other medical staff personnel with examinations and treatments by selecting and passing instruments, providing support and restraint to the patient, draping, and other assistance as directed or required., • Within scope observes and documents patients condition by gathering signs, symptoms, and reactions to therapy, to identify unexpected and/or significant findings, initiates appropriate emergency procedures as necessary, and reports unusual conditions to the registered nurse/advanced practice providers as established by policy and procedure in a timely manner., • May volunteer to start and maintain intravenous flow rate with Certifications, notifies registered nurse/advanced practice/physician of any problems. May discontinue IV therapy except intra-cath and central venous lines., • May volunteer to start perform venipuncture/blood withdrawal with Certifications., • Collects and processes specimens per policy, procedures, guidelines, and protocols., • Provides non-compoicated teaching following the registered nurse/advanced practice provider/physician plan for education. Report any identified learning needs and discharge barriers., • Ensures cleanliness of nursing module/station, patient exam room, and proper functioning of patient care equipment by visual inspection, routine testing, and other related methods. Provides a safe and therapeutic environment for patients and staff., • Utilizes effective verbal and non-verbal forms of communication., • Performs in other departments or modules to which assigned as required by the nursing/department administration to provide and maintain the established standards of care and safety., • Performs departmental back-office workflows including but not limited to proactive office encounter, successfully closing care gaps, patient outreach, access and/or nurse visits., • Participates in staff meetings, and in-service programs., • Assists in ordering and distribution/stocking of module/department supplies and equipment., • Accepts verbal and telephone orders from the physician/advanced practice providers., • Supports patient communication and message management including but not limited to patient emails, call center messages, and all other back-office messages., • Administers pulse oximetry, humidification therapy, spirometer, oxygen therapy via mask or nasal cannula, oral, nasal, and trach suctioning, and sputum induction., • Documents care in Health Connect per policy, procedures, guidelines, and protocols., • Performs other related duties as assigned and required, including orientation of new employees., • Assists in coordinating the discharge process., • Performs all job functions within license certification and scope of practice., • Promotes, ensures, and improves customer service to internal/external customers by demonstrating skills which are consistent with the organizations philosophy of providing extraordinary customer relations and quality service., • Consistently supports compliance and the Principles of Responsibilities (Kaiser Permanentes Code of Conduct) by maintaining the privacy and confidentiality of information, protecting the assets of the organization, acting with ethics and integrity, reporting non-compliance, and adhering to applicable federal, state, and local laws and regulations, accreditation, and licenser requirements (if applicable), and kaiser Permanentes policies and procedures., • Age Related Competencies: Skills assessments and validations are utilized to ensure that employees providing patient care to specific age groups (i.e., infants, adolescents, elderly, etc.) are proficient in identifying the special needs and behaviors associated with a particular patient population. Basic Qualifications:Experience • Minimum Twelve (12) months or greater LVN direct patient care experience within the last three (3) years. Direct patient care experience may include medical office, acute care, home care services, and skilled nursing facility.Education, • High School Diploma or GEDLicense, Certification, Registration Vocational Nurse License (California) • Basic Life Support Additional Requirements: • Extraordinary customer relations and quality service are critical to our success., • We seek candidates who can demonstrate these skills and are dedicated to providing the highest quality of service to our health plan members., • Preferred Qualifications:, • IV Certification and Blood Withdrawal Certification preferred. Notes: • Will work throughout IM Specialty Services, • This is a temporary position for approximately 6 months.

Job Description Burrtec Waste Industries, Inc. is a well-established refuse and recycling collection company serving over fifteen municipalities throughout Southern California and employing over 1900 full time employees. Burrtec continues to grow through acquisitions and successful bid proposals. Burrtec is a family-owned company that firmly believes the key element to our success is knowing how important each employee is in the organization. We have a Maintenance Manager position opening at our Fontana, CA division: POSITION SUMMARY: The Maintenance Manager oversees and maintains an effective fleet maintenance program to ensure that fleet vehicles are maintained in an effective and safety conscious manner. The Maintenance Manager will be able to perform duties in a timely manner and advise leadership of any potential issues that could affect the overall performance and longevity of the fleet. ESSENTIAL DUTIES: • Provide daily guidance and support to on-site technicians to ensure all maintenance work is performed in a safe, efficient and timely manner., • Responsible for maintenance, service, diagnosing, major repair of fleet vehicles and monthly PM compliance (in multiple yards when required), • Ensure shop or facility is clean and kept in a safe, professional working manner, • Plan and schedule team workloads based on preventative maintenance tasks, utilizing budget and personnel, • Manage and maintain company RTA maintenance program, work order data and recurring preventative maintenance schedules., • Ensure vehicle documentation (i.e., registration, insurance, etc.) is current and kept in vehicle as required., • Track and provide recurring maintenance data reports to Management, • Review DVIR (Driver Vehicle Inspection Reports) and distribute the noted defects via work orders to the correct personnel for repair/defect correction and confirmation of Mechanic sign off’s on the DVIR., • Ensure all company safety policies are frequently reviewed, tailgated & enforced. (LOTO, Hot Works, Fall Protection etc.), • Ensure OSHA and DOT & SWPPP compliance, • Report any in yard(s) spills, falls, incidents to Division Manager as required, • Coordinate and direct the activities of all shop personnel including mechanics and welders, • Assign tasks for the mechanical repair of heavy duty refuse trucks, • Maintain parts inventory and container tracking, • Conduct monthly safety training, tailgates, and periodic inspections on maintenance personnel, • Monitor maintenance work flow and ensures tasks are completed in a timely manner and to company standards, • Administer DOT and preventative maintenance programs while ensuring shop personnel is following safe work practices KNOWLEDGE, SKILLS AND ABILITIES: • Strong organizational skills and ability to motivate large groups, • Good decision making, problem solving and communication skills, • Familiarity with DOT and OSHA regulations, • A valid California Driver’s license, required, • Commercial Driver’s license preferred TRAINING AND EXPERIENCE: • Minimum of 5 years’ experience managing a fleet repair facility and heavy duty Mechanics as well as thorough knowledge of HD engines, transmissions and mechanical repairs., • ASE certification for alternative fuels is a plus PHYSICAL: • This position requires that the individual drive, walk, sit, stand, touch, stoop, lift and climb or move heavy objects. WORKING CONDITIONS: • Will be exposed to outdoor weather conditions (heat, rain, wind) and noise levels in the shop We offer competitive wages and an excellent benefits package including 401k and 100% paid medical/dental/life insurance and holidays/vacation/PSL.

Job DescriptionBenefits: • 5 sick days a year, • Opportunity for advancement, • Training & development The duties and responsibilities include, but are not limited to, the following: Demonstrate capability to interact with children in a therapeutic manner that will enhance the lessening of escalation (using restraint as a last resort in accordance with crisis management training). Transport minors, in an agency vehicle, as needed. Be able to effectively organize, motivate and carry out recreational activities that will meet the needs of the children served. Be able to prepare a menu, purchase food, prepare and serve food in an orderly, healthy and appealing manner, in accordance with Title 22, and the ability to teach the children in their charge, the same. Be able to respond appropriately, and in accordance with State and EVC regulations, in crisis or emergent situations as part of a treatment or care team member. Make every effort to maintain a supportive, working relationship with fellow workers, supervisory and clinical staff, families of children, outside agency workers, and other persons in the community involved with our children. Be able to effectively communicate in both written and verbal forms and meet all logging, report, and summary writing responsibilities, including daily mental health notes and SIR's. All reports must be turned in to the appropriate staff personnel in a timely manner. Be able to follow specific procedures and directions in the dispensing and record keeping of medications as directed by Consulting Psychiatrist, and according to Title 22. Be able to ensure that all assigned housekeeping duties are done daily (during assigned shift) allowing for an inspection ready facility. Fully comply with all operational memorandums/policies in effect. Perform other duties as directed by the Facility Supervisor/Administrator or EVC Authorized Staff. Must have a bachelor's in Psychology, 2 years experience working with children, or 12 units of child development.

Job Description Responsibilities The Service Advisor sells and schedules needed service work on commercial trucks and equipment for the dealership service department. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Gather customer complaint details and expectations., • Perform vehicle walk around inspection, verify vehicle information., • Connect to J-Pro and perform on the spot vehicle diagnostics. Print report. Refer to service history (IE:SIR), recommend additional needed service., • Advise customers on the care of their vehicles and the value of maintaining their vehicles in accordance with manufacturer’s specifications., • Write up customer’s vehicle problems accurately and clearly on a service input card, verify customer information. Obtain customer’s signature., • Establish “promised time” based on shop workflow, communicate with foreman., • Establish customer’s method of payment. Obtain credit approval, if necessary., • Create repair order in the business system, create repair order file and secure service input card with customer signatures in standardized repair order jacket., • Check on progress of repair throughout the day. Contact customers regarding any changes in the estimate or promised time, explains cost and time requirements in detail, and gets proper authorization before any additional repairs are performed. Benefits: We offer exceptional compensation and benefits, 401K and stock purchase, incentives for performance, training, and opportunity for advancement - all in a culture that appreciates and rewards excellence, a positive attitude and integrity. Basic Qualifications: • High school diploma or general education degree (GED)., • One year service experience; or equivalent experience and/or education., • Appropriate manufacturer training., • Valid CDL license., • Driving record that will allow insurability by the company’s carrier. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description**Mobile Diesel Technician at Transwest Mobile **Ready to Lead the Way? Join Transwest Mobile! At Transwest Mobile, we’re innovators and problem-solvers, delivering top-tier mobile repair solutions across Arizona, California, Nevada, Texas, and Utah. With over 25 years of trusted service, we keep contractors, municipalities, and fleet operators moving with minimal downtime. We’re seeking skilled technicians with a passion for excellence to join our dynamic team. If you’re ready to take on more responsibility, solve complex challenges, and grow with us, let’s connect! What You’ll Do • Perform advanced maintenance and repairs on heavy-duty diesel engines, hydraulics, electrical systems, and farm machinery., • Diagnose complex mechanical issues using advanced diagnostic tools and service manuals., • Execute both scheduled and unscheduled repairs with minimal supervision, ensuring safety and performance standards., • Operate cranes and specialized equipment to support repair and maintenance tasks., • Communicate clearly with customers, providing detailed service recommendations and updates., • Maintain accurate, detailed records of all repairs and maintenance activities., • Mentor entry-level technicians and collaborate with teams to enhance service delivery., • Stay current on industry advancements and apply expertise to improve repair processes.What You Bring, • High school diploma or GED., • 5+ years of hands-on experience with diesel engines, hydraulic, or electrical systems., • Advanced knowledge of diagnostic tools and service manuals., • Strong troubleshooting skills and ability to work under pressure in fast-paced settings., • Ability to provide own tools suitable for the job., • Capability to prioritize and multitask effectively., • Valid driver’s license and ability to drive a company vehicle (mobile role)., • Ability to pass background checks., • Ability to lift 50+ pounds and work in indoor/outdoor environments.Preferred Qualifications, • ASE certifications or OEM-specific training (e.g., Freightliner, Detroit, Cummins)., • Experience with field service or mobile repair., • Strong communication and customer service skills., • Proven customer-facing experience or project leadership on job sites.Why Transwest Mobile?, • Impactful Work: Tackle challenging repairs to keep critical equipment operational., • Growth Opportunities: Work with industry leaders like Cummins, Eaton, and Ford, and mentor others., • Supportive Culture: Join a team that values innovation, collaboration, and your expertise., • Top Benefits:- Health, Vision, and Dental Insurance- 401(k)- Health Savings Account with Company Match, • Life and Disability Insurance, • Holidays and Paid Time Off, • Referral Bonus Program, • Overtime opportunities based on performance, • On-the-job training, • Work boot allowance, uniforms, and cleaning provided, • Company vehicle for mobile rolesAbout Us Since 2009, Transwest Mobile has redefined fleet productivity with innovative mobile repair services across Arizona, California, Nevada, Texas, and Utah. Our flawless safety record, $3M liability insurance, and 24/7 availability make us the trusted choice for field-ready repairs. Join us to drive efficiency, capability, and safety in every job. Ready to Step Up? Apply now to join a team that values your skills and pushes the industry forward. Let’s keep fleets moving together! Visit transwestmobile.com Equal Opportunity Employer Transwest Mobile Truck Repair is an equal opportunity employer and value diversity at our company. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, protected veteran status, or any other characteristic protected by applicable law. Employment may be contingent upon successful completion of a background check and/or drug screening, where permitted by law. We are committed to providing reasonable accommodations to qualified individuals with disabilities and to individuals with sincerely held religious beliefs, in accordance with applicable law. You should be proficient in: • Troubleshooting Skills, • Electrical Systems Diagnostics & Repair, • Vehicle Electronics & Computer Controls, • Diesel Engine Systems, • Brake & Suspension Systems, • Preventive Maintenance & Inspection, • Transmission & Drivetrain Systems, • ASE Automobile and Light Truck Certification Tests, • Engine Repair, • Suspension and Steering, • Brakes, • Tire Service

Job Description**Mobile Diesel Technician at Transwest Mobile **Ready to Lead the Way? Join Transwest Mobile! At Transwest Mobile, we’re innovators and problem-solvers, delivering top-tier mobile repair solutions across Arizona, California, Nevada, Texas, and Utah. With over 25 years of trusted service, we keep contractors, municipalities, and fleet operators moving with minimal downtime. We’re seeking skilled technicians with a passion for excellence to join our dynamic team. If you’re ready to take on more responsibility, solve complex challenges, and grow with us, let’s connect! What You’ll Do • Perform advanced maintenance and repairs on heavy-duty diesel engines, hydraulics, electrical systems, and farm machinery., • Diagnose complex mechanical issues using advanced diagnostic tools and service manuals., • Execute both scheduled and unscheduled repairs with minimal supervision, ensuring safety and performance standards., • Operate cranes and specialized equipment to support repair and maintenance tasks., • Communicate clearly with customers, providing detailed service recommendations and updates., • Maintain accurate, detailed records of all repairs and maintenance activities., • Mentor entry-level technicians and collaborate with teams to enhance service delivery., • Stay current on industry advancements and apply expertise to improve repair processes.What You Bring, • High school diploma or GED., • 5+ years of hands-on experience with diesel engines, hydraulic, or electrical systems., • Advanced knowledge of diagnostic tools and service manuals., • Strong troubleshooting skills and ability to work under pressure in fast-paced settings., • Ability to provide own tools suitable for the job., • Capability to prioritize and multitask effectively., • Valid driver’s license and ability to drive a company vehicle (mobile role)., • Ability to pass background checks., • Ability to lift 50+ pounds and work in indoor/outdoor environments.Preferred Qualifications, • ASE certifications or OEM-specific training (e.g., Freightliner, Detroit, Cummins)., • Experience with field service or mobile repair., • Strong communication and customer service skills., • Proven customer-facing experience or project leadership on job sites.Why Transwest Mobile?, • Impactful Work: Tackle challenging repairs to keep critical equipment operational., • Growth Opportunities: Work with industry leaders like Cummins, Eaton, and Ford, and mentor others., • Supportive Culture: Join a team that values innovation, collaboration, and your expertise., • Top Benefits:- Health, Vision, and Dental Insurance- 401(k)- Health Savings Account with Company Match, • Life and Disability Insurance, • Holidays and Paid Time Off, • Referral Bonus Program, • Overtime opportunities based on performance, • On-the-job training, • Work boot allowance, uniforms, and cleaning provided, • Company vehicle for mobile rolesAbout Us Since 2009, Transwest Mobile has redefined fleet productivity with innovative mobile repair services across Arizona, California, Nevada, Texas, and Utah. Our flawless safety record, $3M liability insurance, and 24/7 availability make us the trusted choice for field-ready repairs. Join us to drive efficiency, capability, and safety in every job. Ready to Step Up? Apply now to join a team that values your skills and pushes the industry forward. Let’s keep fleets moving together! Visit transwestmobile.com Equal Opportunity Employer Transwest Mobile Truck Repair is an equal opportunity employer and value diversity at our company. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, protected veteran status, or any other characteristic protected by applicable law. Employment may be contingent upon successful completion of a background check and/or drug screening, where permitted by law. We are committed to providing reasonable accommodations to qualified individuals with disabilities and to individuals with sincerely held religious beliefs, in accordance with applicable law. You should be proficient in: • Troubleshooting Skills, • Electrical Systems Diagnostics & Repair, • Vehicle Electronics & Computer Controls, • Diesel Engine Systems, • Brake & Suspension Systems, • Preventive Maintenance & Inspection, • Transmission & Drivetrain Systems, • ASE Automobile and Light Truck Certification Tests, • Engine Repair, • Suspension and Steering, • Brakes, • Tire Service

Job Description TCI RENTAL AND LEASING – If you are a Diesel Mechanic with an expert touch and attention to detail, WE WANT YOU! We are looking for Diesel Mechanics with 2 to 3+ years' Experience - $29.51 to $34.01 an hour depending on skills and experience Shift - Start time 8:30am to 5:00pm Monday through Friday Key Skills: Diagnose and trouble shoot with laptop Suspension and steering components Brake replacement Tire dismount and mount. 90 day dot inspection Preventative maintenance Transmission service Electrical diagnostics Level Up Has Launched! New Career Growth Program for Diesel Technicians We're excited to introduce our Level Up Program, our new initiative designed to help diesel technicians take their careers to the next level. Through personalized career path planning, skills development, and support for training and certifications, Level Up empowers our team to grow, succeed, and thrive—right here at TCI. Apply now and we can schedule your in-person interview and show you around our shop while getting to know each other! https://careers.tcitransportation.com/ Minimum Requirements 2 to 3+ years Diesel Engine Repair Must possess a valid driver's license and meet insurability Self-motivated & Leadership skills Benefits: Weekly Paychecks / Direct Deposit Available Safety Incentives up to $300 Quarterly upon meeting requirements Medical, Dental & Vision Coverage / Critical Illness Insurance Employer Paid Life and AD&D Insurance 401K with Company Match Holiday Pay Employee Discount Programs Uniforms provided Yearly Boot Allowance About Us: We are a family-owned company doing business since 1978. We are dedicated and committed to safety, each other, and our customers. Our team is positive and passionate and come to work each day with a "Can Do" attitude. We strive to be creative problem solvers who bring innovative thinking in all our work. Being ethical, transparent, and accountable has helped shape our team and how we do business. We are looking for more people that match our core values to join our team.

Job Description Compensation: Wage Rate Range: Full-time salary non-exempt, plus benefits. Starting wage rate varies by education, prior relevant experience, wage parity, and other bonafide factors. About Climet In operation since 1962, Climet Instruments is a leading global manufacturer and provider of airborne particle counters and microbial air samplers, which have applications predominantly in pharmaceutical and biotechnology manufacturing. As a valuable member of our team, you will quickly learn that "Quality is in our DNA." This applies not simply to the products we manufacture but our desire that employees be mentally challenged to learn and grow their skillset within the company and constantly improve. Climet offers new employees a team-based friendly work environment with a very stable organization. Climet is actively seeking sharp candidates that are loyal, self-disciplined, and are looking for an opportunity for career development. Qualifications: • EDUCATION: High school diploma (required). Associate's degree in electronics or a related field (preferred), • PRIOR WORK EXPERIENCE:, • 1+ years of manufacturing, electronics, assembly, or quality experience (preferred), • Prior experience using a calculator, calipers, micrometers, tape measure, and drop indicators (preferred), • ISO 9001 Internal Auditor Certified (preferred), • Must have the ability to differentiate between colors., • Excellent Math and English skills (required). Bilingual is a plus., • Strong Interpersonal Communication Skills: verbal and written (required), • Excellent organizational skills and attention to detail, • Proficient in Microsoft Office Suite, • Prior stable employment history (required) Responsibilities: • Perform visual and dimensional inspections of in-process and finished goods, sub-assemblies, and components, • Maintain records and other documentation of inspection/test methods, procedures, and results, • Conduct and report internal audits and evaluations (as assigned), • Conduct final inspections, • Identify and troubleshoot equipment problems and defects, • Review calibration certificates for accuracy, • Maintain a clean and safe work environment, • Must follow procedures established for ISO 9001 Quality Management System, • Other duties as assigned Physical Requirements • Ability to type and work efficiently on a computer, • Must be able to lift 30 lbs., • Sitting or standing for extended periods (required), • Ability to differentiate between colors Climet is proud to be an Equal Opportunity Employer. Applicants are considered for all positions without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, ancestry, marital or veteran status. Job descriptions are not all-inclusive. Tasks, duties, and responsibilities may change for personal growth, organizational development, and/or the evolution of new technologies. Notification to Recruiters and Staffing Agencies: Please note that Climet Instruments Company has an internal recruitment department and does not work with external recruiters or "headhunters." Climet may supplement that internal capability from time to time with assistance from temporary staffing agencies that have a written agreement with Climet. Recruiters and staffing agencies are directed NOT to contact Climet (or any of our employees) directly to present candidates. Climet will not accept resumes from any source other than directly from our internal HR department. Climet will not pay a fee for any placement resulting from the receipt of a resume for which Climet does not previously have a written contract or agreement signed by Climet's General Manager. Any candidate for whom an agency has submitted a resume will be considered to have been referred by the organization to Climet free of any charges or fees. Climet disclaims and rejects any liability under any agreement purporting to be accepted based on negative consent, negotiation with a candidate, performance, or any means other than the signature of the General Manager of Climet. Company DescriptionIn operation since 1962, Climet Instruments Company, A Venturedyne Ltd. Company, has been in operation since 1962 and is a leading global manufacturer of airborne particle counters and microbial air samplers used primarily in biopharmaceutical, medical device, and life science applications to measure the air cleanliness of cleanrooms, isolators, RABS, and biosafety cabinets. Our mission is three words - - Value, Quality, and Innovation, which are the hallmark principles and core values in everything we do. As a valuable member of our team, you will quickly learn that "Quality is in our DNA." This applies to the products we manufacture, as well as our desire that employees be challenged to grow their skillset, develop their career with Climet, and constantly strive for improvement. Climet offers employees a team-based friendly work environment with a very stable organization. Climet is actively seeking sharp candidates that are loyal, self-disciplined, and motivated by a love for their work.In operation since 1962, Climet Instruments Company, A Venturedyne Ltd. Company, has been in operation since 1962 and is a leading global manufacturer of airborne particle counters and microbial air samplers used primarily in biopharmaceutical, medical device, and life science applications to measure the air cleanliness of cleanrooms, isolators, RABS, and biosafety cabinets.\r\n\r\nOur mission is three words - - Value, Quality, and Innovation, which are the hallmark principles and core values in everything we do. \r\n\r\nAs a valuable member of our team, you will quickly learn that "Quality is in our DNA." This applies to the products we manufacture, as well as our desire that employees be challenged to grow their skillset, develop their career with Climet, and constantly strive for improvement. Climet offers employees a team-based friendly work environment with a very stable organization. Climet is actively seeking sharp candidates that are loyal, self-disciplined, and motivated by a love for their work.

Job Description Rush Isuzu Trucks of Fontana, California is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job Description Job Title: Maintenance Technician Department: Linehaul Reports To: Maintenance Supervisor Summary: Daylight Transport is looking for a maintenance compliance inspector and technician. The role is based in Fontana, CA. As the Maintenance Technician, you will assist the Maintenance Team with compliance and statutory inspections of truck and trailing equipment, perform routine maintenance tasks, diagnose and fix mechanical issues, and ensure that all equipment operates efficiently and safely. This role will be pivotal to ensuring Federal and State compliance of our owned and leased equipment. Strong communication skills and commitment to maintaining a safe work environment are essential. Cummins Engine Diagnostics a plus. Key Responsibilities: • Perform PM, DOT, 90-day inspections on trucks and trailers, completing and submitting necessary compliance documents to Safety and Maintenance, • Diagnostics experience (Cummins Engines a plus), • Conduct vehicle inspections in accordance with Part 393 and Appendix G, including:, • Identifying defective vehicle components., • Utilizing appropriate inspection methods, procedures, tools, and equipment effectively., • Perform brake service and inspections, including:, • Applying advanced knowledge of brake systems., • Mastering the use of methods, procedures, tools, and equipment required for brake maintenance and inspection., • Perform daily yard walks and identify any visible, necessary repairs needed done primarily on trucks and trailers (Forklifts and yard hostler experience a plus), • Utilize internal program (Fleetio) to update service and inspection reminders, • Assist with part inventory and part runs as needed, • Willing to receive CARB Clean Air Truck Check certification to perform as needed, • Perform minor maintenance repairs, such as lights, brakes, shock absorbers, glad hands, and tires as needed, • Maintain on-site service truck as needed Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: A preferred combination of training and experience totaling at least 3 years, including: · Participation in a truck manufacturer or commercial training program. · Experience as a mechanic or inspector in a motor carrier maintenance program. · Experience in truck maintenance at a commercial garage, fleet leasing company, or similar facility. · Experience as a commercial vehicle inspector for a State, Provincial, or Federal agency. · Knowledge of Cummins engines and Peterbilt equipment Training and experience completing statutory and regulatory compliance inspections such as DOT and BIT Inspections required. LTL or Truckload Transportation/logistics experience highly preferred. Must be willing to learn new technical skills as needed. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Bilingual in Spanish as a second language preferred. Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in, both, standardized and custom scenarios. Other Skills/Qualifications: Computer literate, PC and mainframe. Effective oral and written communication skills, especially when working with teams. Entrepreneurial spirit: desire and willingness to produce and implement new solutions to old or new problems. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; and talk or hear. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Daylight Transport is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, gender identity, and/or gender expression, sexual orientation, age, disability, pregnancy, genetic information, military status, Vietnam Era and/or veteran status, or any other characteristic protected by applicable law(s).

Job Description Hexagon Agility, a business of Hexagon Composites, is a leading global provider of clean fuel solutions for commercial vehicles and bulk gas transportation with more than $400 million of revenues. Our product offerings include (renewable) natural gas bulk distribution systems of compressed gases, lightweight Type 4 composite natural gas cylinders, and (renewable) natural gas fuel systems. These products transport clean gaseous fuels and enable vehicles to reduce emissions while lowering operating costs. We're looking for a Quality Inspector for our Rialto, CA location. This role has a schedule of 6AM - 2:30PM M-F (overtime and possible Saturday work will be required depending on production needs). Job Summary: Ensures consistent quality of production by enforcing the Quality system, validating processes, and following documentation. Duties and Responsibilities: • Conduct dimensional and cosmetic inspections of purchased components, mechanical assemblies and installed assemblies., • Conduct First Article Inspections of purchased components and mechanical assemblies., • Interpret mechanical drawings and specifications in order to measure complex dimensions such as weld symbols, bend angles/locations, squareness, radius, thread sizes, and port depths., • Completing inspection sections of the Receiving process in ERP system, • Write Nonconformance Reports (MRB Case) in ERP system and Power Business applications., • Creating inspection plans for purchased components and mechanical assemblies, • Frequent verification that control plans are adequate and effective in all phases of production., • Assist manufacturing operations to resolve quality issues quickly and permanently as they arise., • Interface with suppliers on quality issues., • Coordinate containment and improvement actions to resolve issues in a timely manner., • Other duties as assigned by management. Knowledge, Skills and Abilities • Ability to use basic inspection tools such as: height gage, weld gage, radius gage, thread gages, drop indicator, pi tape, calipers and micrometers, • Utilizing basic inspection techniques for Geometric Design and Tolerancing call outs, • Support in the facilities general tool calibration program, • Intermediate knowledge/use of an ERP system., • Intermediate knowledge of Microsoft Office products (Word, Excel, & Power Point), • Ability to understand complex situations, collect data, establish facts and draw valid conclusions., • Ability to write Quality task related work instructions., • Inspires, motivates, and collaborates with others, • Self-motivated; able to work with minimal direction, • Anticipates needs and problems while creating solutions Credentials and Experience • High School diploma or GED required, • Minimum of 2 years’ experience as inspector (or greater role) in an ISO 9001 or AS9100 quality manufacturing environment required., • Proficiency in the use of basic inspection tools is required, • Ability to use Microsoft Office products required, • Ability to read and interpret mechanical Engineering drawings is required, • Ability to use ERP systems is preferred, • Basic knowledge of Gage Repeatability and Reproducibility studies is preferred, • Basic understanding of automotive repair is preferred, • Basic understanding of electrical principles is preferred Physical Demand & Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand for long periods of time and use hands to finger, handle, or feel. The employee is frequently required to stand, walk, reach with hands and arms; stoop, kneel or crouch; talk and hear. The employee must occasionally lift and/or move up to 50 pounds (with assistance). Specific vision abilities required by this job include close vision, and ability to adjust focus. Hexagon Agility is an equal opportunity and affirmative action employer and ensures that all qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, national origin, disability or veteran status.

Job Description Responsibilities The Mobile Diesel Mechanic is responsible for maintaining the fleet for clients and to handle service calls at client locations. Provide service to our customers while maintaining exceptional customer service. This can include: cleaning, maintenance, visual inspection, and removal of parts and attachments. Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning. Rush Truck Leasing opens the door to the world of opportunity. We are the premier commercial transportation solutions provider for businesses across North America. Our network of Idealease and PacLease partners allow us to offer our customers complete truck leasing and rental solutions across our network of dealerships. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility., • Have a current and valid CDL and Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job DescriptionHIRING IMMEDIATELY: QUALITY ASSURANCE SUPERVISOR IN SAN BERNARDINO, CAAccurate Personnel is hiring immediately for a Quality Assurance Supervisor to join our team in San Bernardino, California. This individual will be responsible for maintaining and supervising Quality Assurance procedures in Food manufacturing operations of Ready to Eat Products. The ideal candidate will possess 1-3 years of experience in Food QA, strong computer skills, and more listed below. Apply online and kickstart your career today! Pay, Schedule, and Location • Starting at $33.80/hour, • Excellent benefits package, including medical, dental, and vision, • Full time schedule, • Located in San Bernardino, California Duties and Responsibilities • Responsible for the Kitchen QA team during processing, which verifies GMP’s, HACCP, Risk Based Preventive Controls, Allergen Control and SSOP’s., • Help train associates in kitchen policies, departmental procedures and duties., • Responsible for ensuring compliance with Customers minimum vendor requirements of Food Safety, Strict Personal Hygiene, Product Specifications throughout the entire Kitchen and verifying proper completion of required, Kitchen QA documentation., • Assist in researching and updating state Food Code Regulations and maintaining Public Health Inspection Reports., • Reports: Kitchen QA Technicians, Sanitation Lead, • Regular interaction with: Kitchen & Cheese Production Supervisors, Kitchen and Cheese Production Supervisors, National QA Manager as well as Kitchens/QA GM, Cheese GM, National Kitchen Manager, R&D Supervisor Requirements and Qualifications • 1-3 years of experience in Food QA, • HACCP certification, • Allergen, GMP training preferred, • SQF Practitioner, Food Defense Coordinator, PCQI, • HACCP Certification, • Food Defense Certification, • SQF Practitioner, • College Degree in Food Science/ Microbiology or similar, • Strong computer skills required; with knowledge in MS Office, Excel and WMS system literacy, • SAP, • WMS/Gold system literacy, • Must be able to interact with all levels of management and have excellent written and verbal communication skills. Must be able to manage and lead a diverse workforce., • Must be able to work in spaces with 72 inches of headroom, • Requires tolerance of standing posture up to 2 hours, over an 8-hour shift, • Occasionally work overtime, evenings, or weekends in order to complete work. --(Salary range based on experience)--ABOUT ACCURATE PERSONNELDo you need your next job fast? Accurate Personnel is here to help! As an industry-leading full-service staffing agency, we have all the tools you need to start earning that next paycheck soon. Send us your application and our team will instantly get to work on finding you the right placement to fit your needs. Accurate Personnel has provided temporary job services and direct hire searches for 45 years. Our expertise has allowed us to grow from a regional Chicagoland office into a nationwide search firm that services over 500 clients while never losing sight of personalized service. Let Accurate work for you. Apply with us today!--Accurate Personnel provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. (WBB)

Job DescriptionPermit CoordinatorLocation: Fontana, CA Schedule: Full-Time, 4/10 Schedule (Monday through Thursday, 7:00 AM to 5:30 PM) Compensation: $38.46 - $57.69 per hour Position Summary:We are seeking an experienced Permit Coordinator to support engineering and construction projects by managing the permitting process from application through approval. This role serves as the primary liaison between project teams and regulatory agencies, ensuring permits are obtained efficiently while maintaining compliance with all applicable requirements.The ideal candidate will have extensive experience coordinating permits for utility, public works, infrastructure, engineering, or construction projects and will possess strong organizational, communication, and project coordination skills. Key Responsibilities: • Research, prepare, submit, and track engineering and construction permit applications., • Coordinate permit approvals with municipal, county, state, and regulatory agencies., • Maintain permit logs, records, and documentation throughout the project lifecycle., • Monitor permit status and proactively resolve issues that could impact project schedules., • Coordinate plan check comments, agency responses, and permit resubmittals., • Serve as the primary point of contact with agencies having jurisdiction., • Support permitting efforts related to environmental clearances and regulatory approvals., • Coordinate with consultants, contractors, and project teams to facilitate permit processing., • Manage permit fees, applications, authorizations, and related documentation., • Attend project meetings and provide permitting status updates., • Identify permitting risks and support mitigation strategies to maintain project schedules., • Assist with utility coordination, right-of-way permits, street use permits, encroachment permits, and related approvals. Required Qualifications:, • Associate's or Bachelor's degree in Urban Planning, Civil Engineering, Construction Management, Architecture, Building Inspection, Public Works Administration, Environmental Studies, or a closely related field. Bachelor's degree preferred., • Minimum five (5) years of progressively responsible permitting, administrative, technical, or regulatory coordination experience supporting engineering, construction, utility, infrastructure, or public works projects., • Demonstrated experience preparing, submitting, tracking, and coordinating permits for construction and engineering projects, including managing permit records, tracking logs, regulatory documentation, and compliance requirements., • Experience coordinating with municipal, county, state, and regulatory agencies having jurisdiction, including managing agency comments, permit revisions, resubmittals, and approval processes., • Experience managing multiple concurrent projects, permit applications, deadlines, and agency requirements in a fast-paced environment., • Working knowledge of utility-related infrastructure improvements, including water mains, water services, fire lines, hydrants, valves, appurtenances, utility crossings, and related construction activities., • Familiarity with encroachment permits, street opening permits, right-of-way permits, utility coordination, and other public agency permitting processes., • Ability to identify permitting risks and support schedule recovery or mitigation efforts to maintain project timelines., • Proficiency with Microsoft Office Suite, including Word, Excel, Outlook, and permit tracking logs., • Experience using online permitting portals, electronic plan review systems, document management platforms, and permit tracking databases., • Familiarity with permitting software such as Accela, EPIC LA, Caltrans CEPS, Cityworks, Bluebeam, or similar systems., • Strong organizational, communication, and problem-solving skills, with the ability to manage complex permit applications and effectively coordinate with agencies, consultants, contractors, and project stakeholders., • Ability to read and interpret engineering plans, construction drawings, project specifications, and permitting requirements., • Ability to learn and adapt to new software applications, permitting platforms, and agency-specific systems. Preferred Qualifications: • Certified Permit Technician (ICC), or ability to obtain certification within 12 months of hire., • Experience supporting water utility, public works, civil infrastructure, transportation, environmental, or utility construction projects., • Knowledge of environmental permitting, CEQA processes, Division of Drinking Water requirements, and regulatory compliance programs., • Familiarity with GIS systems, utility mapping platforms, or related technologies. Ideal Background:Candidates with experience in utilities, water infrastructure, public works, civil engineering, construction management, municipal agencies, transportation, environmental services, or related infrastructure environments are highly encouraged to apply.

Job Description Job Title: Quality Control Inspector Location: Fontana, CA Shift: TBD Employment Type: TBD Reports To: Quality Control Manager Job Overview We are seeking a Quality Inspector to ensure our products and processes meet company and customer standards. This role supports daily quality operations, assists the Quality Control Manager, and works closely with production and engineering teams. Key Responsibilities • Follow all safety, quality, and company policies, • Inspect materials, components, and finished products, • Read and use blueprints, drawings, and work orders, • Record inspection results and maintain reports, • Identify quality issues and recommend solutions, • Assist with updating inspection procedures (SOPs), • Perform product and process audits, • Support production teams as needed, • Communicate and help resolve quality concerns, • Complete other duties as assigned Qualifications • High school diploma or equivalent preferred, • Minimum 3 years of experience in a similar role, • Manufacturing experience preferred (plastics industry a plus), • Familiarity with SQF, HACCP, and GMP is a plus, • Ability to read blueprints and technical drawings Skills • Strong attention to detail, • Ability to multitask and meet deadlines, • Self-motivated and able to work independently, • Basic computer skills (Microsoft Office), • Good English communication skills (read, write, speak), • Willingness to work overtime and weekends as needed, • Bilingual (Spanish) Physical Requirements • Stand and walk for extended periods, • Lift and carry up to 50 lbs, • Perform physical tasks such as bending, climbing, and reaching, • Use ladders when needed, • Work in a warehouse environment with varying temperatures #SLY123

Job Description Now Hiring a Quality Control Manager in Fontana, CA . Join our team! Shift: TBD Pay: $76-$83K Benefits: Medical, Dental, Merit Pay, AD & D, Discretionary Bonus Job Purpose:Responsible for ensuring vendor compliance with clients minimum vendor requirements for food safety, posting required documentation in GOLD, researching and updating state food code regulations, maintaining public health inspection reports and supporting Quality Assurance Department projects Essential Duties and Responsibilities: Research and maintain State level Food Code regulations to include requirements for Distribution demo crew members, weights and measures, retail unit pricing and general public health programs Review, follow up and file distribution public health inspection reports Have cheese inventory 100% accurate Maintain finished goods inventory 100% QA program Checking dock temperatures and maintaining high quality throughout the DC Ensure current, accurate PSIs are uploaded for each Item Document file in GOLD Input relevant PSI information into Trader Joe's Allergen Database Posting and tracking of annual 3 rd party vendor audits in GOLD Flag non-compliant vendors for Quality Assurance follow up Track daily warehouse product rejections and save in QA share file Maintain FDA vendor tracking sheet and send to FDA compliance team quarterly Assist with Quality Assurance special projects Minimum Requirements: Strong data entry and computer skills Excellent time management and organizational skills Ability to operate and be certified on all warehouse equipment Ability to communicate effectively orally to resolve issues with other parties throughout the DC Understanding of common distribution practices throughout the DC Ability to work flexible hours, including weekends Computer Skills: Strong computer skills required;i.E., All Microsoft Office, (Excel, Word, Power Point) Reasoning Ability: Must be able to interact with all levels of management and have excellent written and verbal communication skills. Must be able to manage and lead a diverse workforce. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Lifting up to 40lbs Sitting at a computer for long periods of time Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to work in a Distribution Center environment with a variation of temperatures.

Job Description POSITION SUMMARY A fuel transportation company operating across California and neighboring states is seeking an experienced HSSE Compliance Manager – Hazmat to lead all safety, hazardous materials, and regulatory compliance functions. This role is the organization’s primary authority on DOT, FMCSA, EPA, OSHA, CalOSHA, CARB, and PHMSA compliance. The HSSE Manager will oversee driver safety programs, hazmat compliance, spill response, vehicle/tank regulatory requirements, and the development of a strong safety culture across all operations. This position requires a decisive, highly knowledgeable compliance leader capable of operating independently, making rapid decisions under pressure, and holding all levels of the organization accountable to safety standards. KEY RESPONSIBILITIES 1. Regulatory Compliance & Agency Interface • Maintain expert-level knowledge of all regulations governing petroleum fuel transportation, including 49 CFR Parts 100–199, FMCSA, EPA, OSHA 29 CFR, CalOSHA Title 8, and CARB ATCM requirements., • Serve as the primary point of contact for DOT, FMCSA, EPA, OSHA, CalOSHA, CARB, and local agencies., • Prepare and maintain all required filings (MCS‐150, BOC‐3, USDOT updates, state operating authority)., • Monitor regulatory changes and update internal policies, SOPs, and training programs., • Maintain a satisfactory DOT safety rating and proactively manage CSA BASIC scores., • Lead corrective action plans for any regulatory findings or violations. 1. Hazardous Materials Compliance • Ensure full compliance with 49 CFR Parts 171–180 for gasoline, diesel, biodiesel, jet fuel, ethanol, and other petroleum products., • Maintain accurate hazmat shipping papers, placarding, and emergency response documentation., • Verify all drivers maintain valid Hazmat endorsements and current hazmat training., • Conduct hazmat audits at terminals, yards, and active loads; correct deficiencies immediately., • Serve as the on‐call escalation contact for spills, leaks, cross‐contamination, or product releases., • Coordinate with CHEMTREC, NRC, and emergency response agencies., • Complete all required spill reporting within mandated timeframes., • Document incidents, root cause analyses, and corrective actions. 1. Driver Safety, HOS & ELD Oversight • Oversee the Hours of Service (HOS) compliance program; review ELD data daily., • Investigate all HOS violations and determine root cause (driver vs. dispatch)., • Manage the company’s ELD platform and ensure full compliance with 49 CFR Part 395., • Conduct driver safety meetings, coaching sessions, and road observations., • Review DVIRs and ensure all defects are repaired and documented., • Lead accident investigations and near‐miss reviews within 24 hours. 1. Vehicle, Tank & Equipment Compliance • Oversee fleet inspection and maintenance programs to meet FMCSA out‐of‐service criteria., • Manage the 90‐Day BIT program for all tanker trailers., • Ensure vapor recovery systems meet CARB requirements., • Oversee annual tank certifications and pressure tests., • Maintain accurate OOS tracking for all trucks and trailers., • Conduct periodic yard inspections across all terminal locations. 1. Safety Programs, Training & Culture Development • Develop and maintain the company’s Safety Management Program., • Deliver training on hazmat transport, emergency response, HOS/ELD, defensive driving, spill prevention, fatigue management, and product handling., • Maintain training records per FMCSA retention requirements., • Oversee new driver safety orientation; no driver operates independently without completion., • Partner with operations to maintain a “Train the Trainer” program., • Promote a safety‐first culture across all departments. 1. Driver Qualification & DOT Drug & Alcohol Program • Maintain all Driver Qualification files per 49 CFR Part 391., • Conduct annual MVR reviews and address disqualifying violations., • Manage the DOT Drug & Alcohol program under 49 CFR Part 382 and Part 40., • Conduct reasonable suspicion determinations and remove drivers from service when required., • Ensure all supervisors complete required reasonable suspicion training. 1. Incident Investigation & Reporting • Lead investigations for accidents, spills, contamination events, near‐misses, and regulatory violations., • Produce written incident reports including root cause, corrective actions, and timelines., • Manage all regulatory reporting: EPA spill notifications, PHMSA hazmat reports, OSHA logs, FMCSA accident register., • Present monthly safety performance reports to senior leadership., • Review and resolve fitness‐for‐duty concerns. MINIMUM QUALIFICATIONS Education & Certifications • Bachelor’s degree in Transportation, Logistics, Safety Management, or related field OR equivalent experience., • DOT Hazmat Employee Training certification (49 CFR 172.700)., • PHMSA hazmat training required., • OSHA 30‐Hour General Industry preferred., • HAZWOPER 8‐Hour FRO preferred (40‐Hour not required)., • CDS or CTSP certification preferred., • Preferred but not required: Class A CDL with Hazmat/Tanker endorsements. Experience • 5+ years of safety/compliance experience in petroleum fuel transportation or bulk liquid trucking., • 3+ years in a supervisory or management role., • Direct experience managing DOT/FMCSA programs (CSA, HOS, ELD, DQ files, drug/alcohol)., • Hands‐on experience with petroleum products and emergency response., • Experience interfacing with DOT, FMCSA, EPA, OSHA, and CARB inspectors., • Experience managing spill reporting, SPCC plans, CHEMTREC/NRC coordination., • Experience managing BIT inspections and tanker certification programs., • Experience working with MROs and adjudicating DOT drug/alcohol test results. Skills & Competencies • Expert knowledge of 49 CFR Parts 40, 382, 383, 390–396, and 171–180., • Strong understanding of CARB vapor recovery and ATCM requirements., • Proficiency with FMCSA SMS/CSA portal., • Strong written and verbal communication., • Ability to make independent decisions under pressure., • High integrity and accountability., • Proficiency with ELD systems, fleet management platforms, and Microsoft Office., • Bilingual English/Spanish preferred. PHYSICAL DEMANDS & WORK ENVIRONMENT • Standing/walking in terminal yards — frequent, • Climbing on/around tanker trailers — occasional, • Lifting up to 25 lbs — occasional, • Road observations and driving — regular, • Outdoor yard environments — frequent, • Computer/documentation work — daily, • Travel up to 25%, • On‐call availability for spill/incident response DOT SAFETY‐SENSITIVE POSITION NOTICE This role is subject to DOT drug and alcohol testing under 49 CFR Parts 40 and 382. Federal testing requirements supersede California AB 2188 cannabis protections. Location: Inland Empire, CA Employment Type: Full-Time, Exempt Travel: Up to 25% across terminals and yard locations Industry: Petroleum Fuel Transportation / Bulk Liquid Trucking PERFORMANCE METRICS • CSA BASIC scores below intervention thresholds, • 100% BIT compliance, • Zero missed random drug/alcohol tests, • HOS violations trending toward zero, • 100% training completion, • Timely incident reporting (within 72 hours), • Zero late regulatory filings, • Accident preventability trending downward EQUAL EMPLOYMENT OPPORTUNITY The hiring company is an Equal Opportunity Employer and provides reasonable accommodations in accordance with ADA, PWFA, and California FEHA.

Job Description The FSQA Technician reports to the FSQA Supervisor and is responsible for performing all required FSQA functions properly and on time to ensure consistency in producing Safe & High-Quality products that conform to the regulatory, 3rd party certification, company, and customer standards. The FSQA Technician also participates in special projects and assignments as specified by the FSQA Supervisor or Management. Responsibilities include, but are not limited to: • Perform the following FSQA functions as trained, as per established procedures and on time:, • Incoming raw material, ingredients, packaging material, and pallet inspection., • Daily functions such as thermometer calibration inspection, scale calibration verification, water activity meter calibration, ATP swabbing and reader calibration, pre-operational / operational / GMP monitoring, HACCP CCP record review, fill weight Monitoring, X-ray and/or metal detector calibration verification and monitoring, label printing and review, retention sample collection and data entry as per established procedures., • Periodic functions such as lab sample submission, gluten test, environmental swabbing, air quality collection, potable water quality collection, pest control device inspection, facility GMP audit, retention sample shelf-life evaluation, and allergen validation as per established procedures., • Place non-conforming material on hold and facilitate hold disposition as per FSQA Management’s instructions., • Perform pre-shipment record review as assigned by FSQA Supervisor or Management., • Assist FSQA Management in troubleshooting, corrective and preventive action development, and implementation., • Perform job / GMP / food safety training for new employees, as required by FSQA Supervisor or Management., • Proactively communicating important findings, observations, and results with concerned personnel., • Participate in special projects and assignments as specified by the FSQA Supervisor or Management., • Collaborate with company-operated sites, co-manufacturers, and 3rd party locations to achieve and maintain regulatory compliance and 3rd party certifications like those for SQF, Gluten Free, Organic, etc. Education: • High School Diploma / GED / Associate’s degree Experience: • 1 -3 years of food or beverage QA/C experience in the USDA and/or FDA-regulated manufacturing facilities., • Basic mathematical skills., • Effective English written and verbal communication skills., • Spanish language skills (verbal and/or written) are a plus, • Proficient user of PC, including MS Outlook / Excel / Word / PowerPoint / Chats., • SafetyChain / Redzone / TraceGains / MasterControl or other FSQA and productivity software user experience. Certifications: • HACCP certification, SQF or BRC knowledge. Key Competencies & Traits: • Strong analytical and critical thinking skills., • Effective communicator and collaborator across all levels of the organization., • Proven ability to lead and develop high-performing teams., • Skilled at managing complex projects in a fast-paced environment., • Proficiency in Microsoft Office and data analysis tools., • Willingness to travel occasionally to support cross-site initiatives or project implementation., • Willing to work different/extended hours as required., • High integrity and strong work ethics., • A go-getter with a can-do attitude., • Self-motivated, articulate, detail-oriented, and organized., • Resourceful, tenacious, and creative. Physical Requirements • This role requires frequent presence on the production floor and may involve exposure to noise, temperature fluctuations, and other manufacturing conditions., • Must be able to lift up to 50 pounds occasionally., • Requires the ability to walk, stand, bend, stoop, and reach., • Visual acuity requirements include close vision, distance vision, color vision, and depth perception, particularly for work with computers and troubleshooting equipment.

Job Description Design Engineer Position is located in Apple Valley CA. JOB SUMMARY Provides engineering support in a dynamic manufacturing environment. Draws on experience and engineering knowledge to resolve technical problems related to production. Interprets blueprints, industry standards, and customer requirements to design manufacturing tooling and fixtures, develop processes, create manufacturing blueprints, 1:1 scale print, and other supplementary manufacturing data. Performs other administrative support functions as needed. ESSENTIAL FUNCTIONS • Assist in creating a work environment that effectively engages all associates at all levels to continuously improve the company processes and QMS., • Research and draft blueprints, engineering plans, and graphics., • Use SolidWorks to develop solid models and drawings of new products., • DFM (Design for Manufacturing) experience, • Maintain engineering records and designs., • Assists in resolving TBT process issues., • Assess all engineering prototypes to determine issues or risks and communicate customer requirements to TBT personnel., • Thoroughly understand blueprints, part configurations, GD&T, and other aspects of engineering drawings., • Possess knowledge of machining processes, welding knowledge is a plus, • DPD, (Digital Product Definition), Procedure (WI 3080059), • Solve complex technical problems in a collaborative environment., • Perform mathematical calculations to solve problems utilizing knowledge of algebraic and geometric principles., • Drive a project to completion, including production planning, work instructions, and process development., • Maintain skills in project management., • Maintain knowledge of mechanical inspection and measurement equipment., • Develop work instructions., • Assist in resolving customer technical and application problems as related to company’s focus and capabilities., • Arrive to work, meetings, appointments, and other work-related functions on time and as scheduled., • Follow procedures and use common sense to maintain a safe working environment., • Ability to work with limited supervision., • Maintain a clean and organized workspace., • Meet goals and objectives in a timely manner., • Perform other duties and tasks as assigned., • Maintain a professional relationship with customers and suppliers. PERIPHERAL DUTIES • Interact with organizational team members and other departments in a professional manner., • Assists in formulating strategic plans., • Assist the quality and engineering employees in their duties as needed., • Perform other duties as assigned. WORKING CONDITIONS Manufacturing environment: may be exposed to loud noises, unique smells, changing temperatures, machinery with moving parts and other dangers associated with manufacturing (cutting, deburring, etc.). TBT has safety equipment and safety standards in place to help maintain a safe work environment. WORKING HOURS Monday – Thursday 6:00 AM – 4:30 PM. Overtime maybe required on an as needed basis. PHYSICAL REQUIREMENTS • Good manual dexterity and visual acuity., • Lifting up to 75lbs, pushing, pulling, standing for long periods of time may occasionally be required. EMPLOYER’S RIGHTS This job description does not list all the duties of the job. You may be asked by management to perform other duties. Tube Bending Technology, LLC has the right to revise this job description at any time. This job description is not a contract for employment. Your continued employment with Tube Bending Technology, LLC is by mutual consent. BENEFITS Tube Bending Inc Technology, LLC is proud to offer the following competitive benefits package: Alternative Work Week (M-Th) 75/50% Health Insurance paid by employer 401k Over Time Paid Time Off Paid Holidays Paid Sick Leave Company events Salary based on experience https://tubebendingtechnology.com/ Job Type: Full-time EEOC Tube Bending Technology LLC is an Equal Opportunity Employer. Employment with Tube Bending Technology is not influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. ITAR REQUIREMENTS To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Position is located in Apple Valley CA. Company DescriptionTube Bending Technology, LLC has been serving the aerospace and defense industries for over 50 years. With roots in the Apollo space program, it is considered the premier tube bending shop in the region. Our dedication to high quality standards and exceptional customer service, has led the company into an era of continual growth and expansion. Tube Bending Technology, LLC. is ISO 9001 and AS9100 Registered and Nadcap certified. Following our core values, we have created a challenging and satisfying work environment for all team members by providing great working conditions, exciting projects, excellent benefits, and opportunities for advancement.Tube Bending Technology, LLC has been serving the aerospace and defense industries for over 50 years. With roots in the Apollo space program, it is considered the premier tube bending shop in the region. Our dedication to high quality standards and exceptional customer service, has led the company into an era of continual growth and expansion. Tube Bending Technology, LLC. is ISO 9001 and AS9100 Registered and Nadcap certified. Following our core values, we have created a challenging and satisfying work environment for all team members by providing great working conditions, exciting projects, excellent benefits, and opportunities for advancement.

Job DescriptionTrailer Mechanic / Registered Tank Inspector Company: Depot Connect International (DCI) Industry: Tank Trailer & ISO Tank Container Services Location: Bloomington, CA Pay Range: $22.00 – $42.00 per hour (Starting rate based on experience) Build a Career That Keeps America Moving Depot Connect International (DCI) is a global leader in Tank/ISO Tank Container Services and Tank Trailer Parts. Formed by the combined expertise of industry leaders Quala, Boasso Global, and PSC, DCI operates over 120 locations worldwide with more than 3,500 employees delivering mission-critical transportation services. We are currently seeking DOT inspection-certified Trailer Mechanics with specialized tank trailer repair experience who take pride in their craft and understand the importance of safety, precision, and reliability. If you enjoy diagnosing problems, solving complex mechanical challenges, and working on heavy-duty equipment that truly matters, this is the opportunity to grow your career within a stable, expanding global company. Role Overview The Trailer Mechanic / Registered Inspector is responsible for inspecting, diagnosing, repairing, and maintaining a diverse fleet of specialized tank trailers in strict compliance with DOT and HM183 (hazmat) regulations. This role requires strong mechanical aptitude, advanced troubleshooting ability, and an absolute commitment to safety and quality workmanship. Key Responsibilities DOT & HM183 Inspections: Conduct rigorous, compliant inspections on various cargo tank specifications, including low-pressure liquid and chemical trailers (MC 306/406, MC 307/407) and high-pressure/cryogenic gas trailers (MC 331, MC 338). Diagnostics & Repairs: Diagnose failures and perform high-quality repairs on mechanical, electrical, structural, and tank piping/valve systems. Brakes & Suspension: Inspect, service, install, and repair trailer suspension systems and air brake systems. Compliance & Documentation: Ensure all structural repairs and testing align perfectly with federal hazmat safety standards; maintain meticulously detailed inspection logs. Safety & Environment: Follow all OSHA and confined space safety procedures while maintaining a clean, organized shop floor. Welding (Plus): TIG welding experience (aluminum, stainless steel, or carbon steel) is highly preferred to align with our shop's ASME "R" Stamp capabilities. Qualifications DOT Inspection Certification Required (Meets FMCSA criteria for a Registered Cargo Tank Inspector). Experience: 2+ years of dedicated tank trailer repair and testing experience preferred (ideal candidate has 3–5 years). Technical Knowledge: Deep familiarity with DOT HM183 cargo tank testing requirements (V, I, L, P, T, K testing methodologies). System Mechanics: Proven experience troubleshooting and repairing heavy-duty air brake systems, suspensions, and industrial piping. Quality Focus: Ability to read, understand, and execute repairs according to technical manuals, blue-prints, and federal compliance standards. Physical Requirements Regularly lift and/or move up to 50 lbs (and occasionally up to 75 lbs with assistance). Ability to safely enter, exit, and work inside tank trailer manholes (Confined Space environment). Ability to stand, bend, kneel, and work in physically demanding shop conditions. Career Growth & Development At DCI, we believe in investing heavily in our mechanics. We offer: Skill-Based Pay Reviews: Earn automatic pay rate evaluations every 6 months as you level up your skills until you hit top pay! Production Bonuses: Earn extra compensation based on your efficiency and output. Advanced Certifications: Access to resources and training to become a National Board ASME Certified Welder. Tool Support: Take advantage of our Tool Purchase Program to build your professional kit. Clear Pathways: Transparent career advancement tracks within a massive, global logistics footprint. DCI Benefits Competitive pay ($22.00 – $42.00/hr) with built-in Tier Levels. Partially employer-paid medical, dental, and vision insurance. 401(k) with a generous employer match (Traditional and Roth options). 100% employer-paid short-term/long-term disability and group life insurance (up to 1.25x annual salary). Paid Time Off (PTO) plus 10 paid holidays. Optional HSA & FSA accounts. Tuition Reimbursement & Employee Referral Programs. An effective, award-winning, and proven shop safety culture. APPLY NOW and START A NEW CAREER WITH THE TANK PROS!

Title: Box Truck Driver Reports to: Branch Manager Responsibilities: • Collect and verify delivery instructions including tickets, back orders, pickups, etc. for the day., • Complete cargo inspection to ensure it’s loaded to match paperwork and delivery sequence., • Assist with safely loading materials as needed., • Map deliveries, checking for delays and plan route to effectively meet customer deadlines., • Complete pre and post-trip safety inspection of vehicle, recording and reporting any defects or hazards., • Follow all DOT, OSHA, and company safety protocols, • Safely navigate cargo to customer sites or intercompany transfers, pickups., • Maneuver vehicles into loading or unloading positions., • Unload cargo safely at delivery site, verifying all items are delivered to customer specifications., • Communicate delivery status, delays, or issues promptly to dispatch and branches., • Pick-up return-to-warehouse items, empty pallets, recalls, damaged/recycled material with appropriate paperwork and communication, • Review deliveries with customers to ensure they meet their needs., • Acquire signatures and/or delivery confirmations for each customer before leaving site(s)., • Update paperwork, logs and reports and process in neat, organized, and timely manner., • Provide ongoing communication of changes and location to customers, dispatch, and supervisor., • Report any accidents or problems immediately., • Maintain a clean, organized, and roadworthy vehicle at all times., • Assist with special projects as assigned by management. Skill Requirements: • Good communication skills in both written and spoken form., • Ability to follow specific verbal and written instructions., • Work overtime as required by business needs., • Follow traffic laws and read maps for directions., • Maintains a positive and professional demeanor as a trusted AC Pro represenative., • Must be organized and able to multi-task in a fast-paced environment., • Comfortable navigating construction sites and tight delivery areas., • Ability to use mobile delivery apps and GPS., • Dependable, punctual, and able to work independently. Education and/or Experience Preferred Requirements: • High School Diploma or GED, • Valid Class C Driver License with a clean driving record., • Minimum 2 years of professional driving experience (box truck or similar). Physical Requirements: • Ability to sit for extended periods of time for driving., • Frequent standing, walking, bending, reaching, and climbing in/out of vehicles, • Ability to stand on two feet, walk, twist, bend, reach, stoop, kneel, and crouch for extended periods, • Must be able to consistently lift up to 50 lbs.; any item over 50 lbs. requires assistance from a team member or use of equipment such as a manual pallet jack, • Ability to use both arms and hands fully for tasks such as reaching, feeling, grasping, gripping, carrying, pushing, and pulling., • Must be able to work in various warehouse conditions, including cold, heat, wind, dust, wet environments, and noisy surroundings, • Ability to pass a Pre-Employment drug and physical screen As a member of our team, you will enjoy: • Medical: HMO & PPO options, • Dental: HMO & Dental PPO In-Network, • Vision Plan, • Company-Paid Life Insurance, • Health Flex Spending Account (FSA), • 401(k) Plan Match, • Employee Assistance Program (EAP), • Vacation & Sick Pay, • Paid Holidays Schedule: Morning shift, plus overtime and Saturdays as needed Pay Range: $22.00 - $25.00 per hour (DOE) *Required - Applicants must be at least 21 years of age. All candidates are required to pass a pre-employment drug screen following an offer of employment, as well as provide documentation of eligibility to work in the U.S. Equal Opportunity Employer

If you are a current associate, you will need to apply through our internal career site. Please log into Workday and click on the Jobs Hub app or search for Browse Jobs. AREA CHIEF OF STAFF The pay range for this role (full-time) is $148,946 - $215,144 annually. This role is also eligible for variable pay based on production. The pay range listed reflects a general hiring range for the area, with the specific rate determined based on the candidate’s experience, skill level, abilities, and education, and may vary depending on location and schedule. SUMMARY OF JOB PURPOSE AND FUNCTION The primary purpose and function of the Area Chief of Staff is to lead, develop and manage associate veterinarians in their hospitals to ensure Banfield can attract, develop, engage and retain doctors that will deliver quality care and meet expected hospital performance measures. This position drives the culture and delivery of quality care by the veterinary provider team (DVM, CVT, VA) in their assigned hospitals to ensure that every pet receives consistent care aligning with our six domains of quality (safe, effective, patient/client centered, timely, efficient and equitable care.) The Area Chief of Staff partners with the Practice Manager (if applicable) to drive the culture and delivery of quality care by the veterinary provider team (DVM, CVT, VA) in their assigned hospitals to ensure that every pet receives consistent care aligning with our six domains of quality (safe, effective, patient/client centered, timely, efficient and equitable care. ESSENTIAL RESPONSIBILITIES Live and exemplify the Five Principles of Mars, Inc. within self and team. Act as Responsible Veterinarian for Veterinary and Pharmacy Board Permits, as required by federal, state, or local law. Responsible for the ownership and management of the controlled substance inventory for relief doctors. Own doctor engagement and retention by consistently assessing risk, ensuring a proactive retention strategy, and creating a culture of community and engagement where doctors feel supported and can be successful. Provide effective medical leadership to their hospital teams by driving an inclusive and collaborative work environment in their assigned hospitals in partnership with the practice managers. Validate the clinical skillset and alignment with quality standards of doctors, veterinary assistants, and veterinary technicians by performing medical record reviews, veterinary quality assignments, audits and patient safety event reviews in their assigned hospitals. Provide veterinary services. The amount of time spent in clinical role, seeing patients, will depend on various factors. These include the numbers of hospitals, number of direct reports, the productivity and performance of each hospital. All ACOS should expect to spend a percentage of their time in role, and this will be aligned upon a case-by-case basis in partnership with the DVQ. This role is 100% hospital based and considered a working manager role. Oversee the coaching program for newly hired veterinarians to ensure an engaging experience which results in a productive doctor knowledgeable in Banfield quality standards, Optimum Wellness Plans, processes, and workflows. Ensure experiential learning to develop clinical, surgical, and dental skills based on individual veterinarian needs. Partner with the Director of Veterinary Quality and Talent Acquisition team to recruit veterinary talent. Act as a brand ambassador in the local veterinary community. Deliver an excellent hospital experience to student externs, student job program participants, and veterinary candidates during hospital observations. Work with associate doctors to ensure they have the skills to achieve their productivity goals through delivery of high-quality medicine, a focus on preventive care, providing a great client experience, and partnership with the hospital team. Deliver veterinary operations KPI's of assigned hospitals through their leadership of the hospital and their partnership with the practice managers. Partner with practice manager to develop, execute, and revise plans which achieve targeted KPI's through hospital performance. Accountable to hospital OGSM performance as quality medicine delivers operational outcomes. Develop a veterinary leadership talent bench and have a succession plan in place for assigned hospital pod. Ensure compliance to Banfield's clinical essentials, government regulations and legislation, and veterinary industry standards through veterinary quality assessments, medical record reviews, audits, and patient safety event reviews. Hospital operations must meet all local, state and federal regulatory requirements including but not limited to compliance with controlled substance management and radiation safety. Create and execute timely plans to resolve identified gaps. Champion preventive care culture by communicating, demonstrating, and validating behaviors which drive optimum wellness plan growth and retention. Create a say yes culture by driving access to care and superior client service resulting in meeting or exceeding client experience scorecard goals. Responsible for the appropriate and timely resolution of client complaints related to medical standard of care. Manage the medical equipment inventory and new medical equipment requests in partnership with their Director of Veterinary Quality in their assigned hospitals. Deliver the highest level of veterinary care to every pet in a professional and ethical manner while ensuring that the client and their pet have an exceptional experience. Establish trust and gain the confidence and compliance of clients through effectively delivering appropriate preventive care, performing complete diagnostic workups, developing thorough treatment plans, communicating home care instructions, and planning follow-up visits. Other job duties as assigned. THE FIVE PRINCIPLES Quality – The consumer is our boss, quality is our work, and value for money is our goal. Responsibility – As individuals, we demand total responsibility from ourselves; as associates, we support the responsibility of others. Mutuality – A mutual benefit is a shared benefit; a shared benefit will endure. Efficiency – We use resources to the full, waste nothing and do only what we can do best. Freedom – We need freedom to shape our future; we need profit to remain free. HIRING QUALIFICATIONS / COMPETENCIES Leadership Plans and Aligns Drives Vision and Purpose Develops Talent Manages Conflict Financial Acumen Managers Complexity Functional Attracts Top Talent Communicates Effectively Drives Results Ensures Accountability Functional/Technical Skills CAPABILITIES AND EXPERIENCE (CAN DO) Ability to multi-task – Manages multiple tasks at one time; quickly and accurately shifts attention among multiple tasks under distracting conditions without loss of accuracy or appearance of frustration. Organizational ability – Demonstrates a systematic approach in carrying out assignments. Is very orderly and excels at cutting through confusion and turning chaos into order. Surgical skills – Proven ability to perform all basic surgeries, including use of all standard medical instruments and equipment. Problem solving skills - Demonstrates a strong ability to identify, analyze and solve problems. Translates problems into practical solutions. Intellectual ability - Accurately and consistently follows instructions delivered in an oral, written or diagram format. Can provide directions. Commitment to continual learning. Mathematical ability - Ability to add, subtract, multiply and divide, and to compute rate, ratio and percent; ability to convert units of measurement. Computer skills - Comfortably and confidently uses a computer and specialized software. ATTITUDES (WILL DO) Initiative – Shows willingness and aptitude to use own discretion in taking appropriate steps in finding solutions to problems; presents options and ideas to enhance current processes or procedures. Takes on additional responsibility when both big and small tasks need to be done; seeks out the most valuable work to do during times when the hospital faces low client demand. Integrity – Firmly adheres to the values and ethics of Banfield Pet Hospitals. Exhibits honesty, discretion, and sound judgment. Cooperativeness – Willing to work with others, collaborating and compromising where necessary; promptly shares relevant information with others. Flexibility – Is open to changing situations and opportunities and is willing to perform all tasks assigned. Independence – Able and willing to perform tasks and duties without supervision. Tolerance for Stress / Resiliency – Maintains a positive “can do” outlook, rebounds quickly from frustrations and unpleasantness, and maintains composure and friendly demeanor while dealing with stressful situations. SPECIAL WORKING CONDITIONS Ability to work at a computer for long periods of time. Project timelines and work volume / deadlines may often require more than 40 hours per week to complete essential duties of this job. Must have mental processes for reasoning, remembering, mathematics and language ability (reading, writing, and speaking the English language) to perform the duties proficiently. Ability to carry out instructions furnished in written, oral, or diagram form and to solve problems involving several variables. Requires sufficient ambulatory skills in order to perform duties while at hospital. Ability to stand, walk, stoop, kneel, crouch, and climb as well as manipulate (lift, carry, move) up to 50 pounds. Requires good hand-eye coordination, finger-hand-arm dexterity with the ability to reach and grasp, and visual acuity to use a keyboard and operate necessary equipment. The noise level in the work environment is moderately high. Associate is routinely exposed to a variety of pets that may bite or scratch, and on occasion, exposed to anesthesia, radiation, biological hazards and medication/controlled substances. Some travel required, to assist other area hospitals as well as for vendor visits and associate education. Banfield policies and protocols are not intended to supersede the associate's legal responsibilities and medical judgment. In the event of a conflict, applicable laws and regulations will control. DEA: Candidate must obtain state-controlled substance and federal DEA license within 3 months of employment, unless otherwise required by the state in which working. USDA: Accredited by the USDA Animal and Plant Health Inspection Service, National Veterinary Accreditation Program within 3 months of employment. EXPERIENCE, EDUCATION AND/OR TRAINING Doctor of Veterinary Medicine (DVM/VMD) or equivalent foreign degree required. Veterinary license in good standing or eligibility for licensure with all applicable state veterinary boards for assigned hospitals. 3 years of experience in small animal medicine and surgery practice. BENEFITS Here at Banfield, we prioritize your well-being and professional growth by offering a comprehensive total rewards package, including health, wellness, and financial support for you, your family, and even your pets. Check out some of our “Meow-velous” benefits: Comprehensive Medical, Dental, and Vision Insurance: Enjoy peace of mind knowing your health and wellness are our top priorities. We've got your essential medical, dental, and vision care covered. Generous Retirement Plans (401(k) and Roth): Invest in your future and enjoy a generous company match to help you build a secure financial future.* Best-in-Class Student Debt Relief Program (for Full-Time DVMs): At Banfield, we understand the significant financial burden of student debt on veterinarians. We are committed to supporting our veterinary professionals and believe that addressing student debt is crucial for the long-term health of the veterinary profession. Paid Time Off and Holidays:...

Job DescriptionDescription: JOB SUMMARY: Technicians are responsible for performing vehicle repair and maintenance as assigned in accordance with dealer and factory standards with a focus on customer service excellence. ESSENTIAL FUNCTIONS: Primary Responsibility, Scope of Work, KPI Management, complexity: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Perform assigned work with excellence and high quality as efficiently as possible., • Receive work orders and perform assigned tasks as required., • Inventory and maintain issued and required company service tools in safe condition to perform jobs assigned., • Communicate with parts department to obtain necessary parts to complete work., • Inspect assigned vehicle thoroughly to determine condition of vehicle requires any if additional and/or safety items require attention; report any problems., • Accurately track the time spent on each job using the NetSuite application and record times in various segments of the work order., • Write clear and concise descriptions or “stories” of the repairs performed on various segments of work order using the three “3” C method., • Concern, • Cause, • Correction, • Accurately track all parts and material needed to perform repairs using the NetSuite application., • Road Service Calls – If qualified, travel to a customer’s location in a company service truck or with another authorized company driver to perform repairs at the customer’s location., • Inform Service Management of any delays or problems with the assigned tasks., • Maintain proper housekeeping of all work areas and tools., • Verify security of all supplies and parts., • Maintain all industry related and required Certifications., • Conform with all regulations, policies, work procedures and instructions., • Conform to all safety rules and use of appropriate safety equipment., • All other reasonable duties assigned within a Service Technician role. Management-related: This position has no supervisory responsibilities. Key Performance Indicators: • Technician Performance Efficiency (minimum 80%)., • OEM Certification Maintenance., • Comeback Percentage (Less than 2.0%)., • Adherence to Core Values., • Completion rate of assigned company training., • Compliance to company safety policies. Leadership: Level 4 Technician has no management responsibilities. Competencies • Technical Capacity., • Problem Solving/Analysis., • Leadership., • Discretion. Supervisory Responsibilities: This position may include limited supervisory responsibilities. (Training and Development) Work Environment: While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of ambient weather conditions. The noise level in the work environment can be loud. Position Type/Expected Hours of Work This is a full-time position. Operations days and hours are Monday through Friday, 6 a.m. to 2:30 p.m. Shifts may vary. Occasional overtime and weekend work may be required. Travel Some travel may be required for this position. ADDITIONAL RESPONSIBILITIES: • Assist in New Bus Deliveries., • Assist in Facility Maintenance., • Perform Monthly Safety Inspection. Requirements: JOB SPECIFICATIONS: (Please describe what is required for satisfactory job performance in each category.) Education and Experience: • High school diploma, • Class B Commercial Driver’s License, • Passenger Endorsement requirement., • Air-Brake requirement., • NFPA 70 – High Voltage Safety Certification (E.V.), • E.V. Power Drive Certified., • Obtain the Blue-Bird Associate Level Certification. (1-Year), • EPA 609 Certification., • CNG Fuel System Inspection Certification. (1 of the 2 below), • ASE Certification (F-1), • NGVI Certification., • Wheelchair Training one (1) of the following., • Braun, • Ricon, • A/C Training. At least one (1) of the following., • MCC/Carrier, • Valeo, • Trans-Air, • ACT Preferred Education and Experience: • Vocational College or Trade/Technical School Diploma/Certificate, • 6 + Years Professional Heavy Duty Automotive Mechanics Experience, • 5 + Years Electrical System Diagnosis and Repair Experience, • ASE School Bus Certification., • S1-Body Systems & special Equipment, • S2-Diesel Engine, • S3-Drive Train, • S4-Brakes, • S5-Suspension & Steering, • S6-Electrical/Electronic Systems, • S7-Air Conditioning Systems & Controls

Job DescriptionDescription: Our dealership is now seeking a dynamic team member with a proven track record in a new & used car automotive environment for our family-owned and operated dealership. We are hiring an experienced Advanced Lube Technician or Automotive Technician to join our team! Now is the time to take your career to the next level. Prospective candidates will possess a desire to be the best of the best. We are focused on the customer and focused on your long-term success. When you join our team, you'll have access to a total compensation package, which includes great career growth, a friendly work environment, and outstanding benefits....and more: • Competitive Wages, • Paid Time Off for Volunteer Time, • Paid Vacation, Sick and Holidays, • Paid Basic Life Insurance, • 401K, • Health, Dental, Vision Insurance, • Other Supplemental Insurance options such as:, • Additional access to Term Life Insurance Policy, • Short Term and Long-Term Disability, • Health care, dependent care, and family reimbursement accounts, • Pet Insurance In this position you would be responsible for performing work outlined on a repair order; and performs lubrication, safety inspections and other related services. You would report directly to the Service Director. Qualifications: • High School Diploma or equivalent, • Minimum 2 year of relevant experience, • Minimum 2 year of working knowledge and experience of automotive products, repairs and parts, • Secondary education in the automotive field or equivalent work experience, preferred, • Ability to multitask in a demanding environment, • Strong communication skills and the ability to translate customer needs to workable technician orders, • All applicants must be authorized to work in the USA, • Ability to demonstrate the ability to pass pre-employment testing including background checks, MVR, drug test, and valid driver's license, • Must have a valid driver’s license with a minimum of 3 years driving experience and be eligible for coverage under shop insurance policy (Not an excluded driver), • Bilingual preferred but not required Essential Duties, but not limited to: • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Sells lubrication, safety inspection and other related services., • Maintains records on regular customers, following up periodically with telephone, mail or personal reminders., • Drains oil from crankcase and refills with required amount of oil., • Replaces oil and air filters., • Inspects vehicle fluid levels, replaces or replenishes as necessary., • Checks tire pressure and adds air if needed., • Lubricates moving parts with specified lubricants., • Communicates with parts department to obtain needed parts., • Reports machinery defects or malfunctions to supervisor., • Documents all work performed on the repair order., • Participates in manufacturer-sponsored training programs as assigned by service manager., • Keeps abreast of manufacturer technical bulletins., • Ensures that customers' cars are kept clean. Notifies service advisor immediately of anything that has happened to change the appearance or condition of the vehicle., • Keeps shop area neat and clean., • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as when they were received., • Understands, keeps abreast of and complies with federal, state and local regulations, such as hazardous waste disposal, OSHA Right-to-Know etc., • Operates all tools and equipment in a safe manner., • Reports any safety issues immediately to management. Apply today and find out all our dealership has to offer! Requirements:

Job Description Traveling Maintenance Technician - Inland Empire Based Job Summary: SoCal Property Management, Inc. is seeking a skilled Traveling Maintenance Technician to join our elite Maintenance Strike Team based out of the San Bernardino area. As a key member of our team, you will travel to properties across multiple regions to provide maintenance support and property stabilization. If you are a hands-on professional with a strong background in multi-family maintenance or construction, and a passion for delivering high-quality work in a fast-paced environment, we encourage you to apply. Key Responsibilities: Travel to properties across multiple regions to provide maintenance support and property stabilization Perform unit turns, repairs, capital improvement projects, and emergency maintenance work Complete skilled tasks including plumbing, electrical, carpentry, drywall, painting, appliance repair, and basic HVAC Troubleshoot and resolve maintenance issues efficiently with minimal oversight Support inspection preparation and rapid project completion timelines Work alongside regional teams to maintain company standards and improve property performance Maintain accurate work order documentation and project updates Properly use and maintain tools, equipment, and materials Maintain a safe, clean work environment and follow OSHA/company safety standards Represent the strike team professionally while onsite and provide excellent service to residents and site teams Qualifications: Minimum 3-5 years of multifamily maintenance or construction experience Strong skills across multiple trades; ability to work independently Experience with unit turns, renovation projects, or high-volume maintenance environments preferred Valid driver's license with clean driving record Ability to lift 50+ lbs, climb ladders, and work in varying environmental conditions Strong communication and teamwork skills Willingness to travel up to 75%, including overnight stays and occasional extended hours Compensation & Benefits: Full-time position Paid mileage for travel Health, dental, and vision insurance Paid time off Retirement plan Work Location: Based in the San Bernardino Area with frequent travel to other regions as needed. If you are a driven and detail-oriented professional looking for a challenging and rewarding role, we encourage you to apply to this exciting opportunity.

Job Description Martin Automotive Group is looking for a Service Technician to join our team at our Volkswagen San Bernardino dealership. We are looking for certified technicians to join our team. Come be part of a team determined to be the best! Up to $3,000 sign-on bonus, dependent upon certifications and experience Responsibilities: • Perform work specified on the repair order with efficiency and in accordance with dealership policies, • Test components and systems, using diagnostic tools and special service equipment; test drive vehicles, • Diagnose, maintain, and repair vehicle automotive systems, • Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Complete online multi-point inspection report, • Execute repairs under warranty to manufacturer specifications Requirements • Must have at least 2 years of experience as an auto technician, • Knowledge in all aspects of automotive repair and maintenance, • Computer literate, • Able to operate electronic diagnostic equipment, • Valid driver’s license, • OEM certifed technician preferred, • Manufacturer certifications preferred Benefits • Medical, Dental, Vision, Life Insurance, • 401k, • Paid Holidays, • Weekly Paychecks, • Up to $50.00 hourly flat rate + productivity incentives (depending on certifications), • Sign on bonus for Master Certified Technicians, • President’s Club (see details below) President’s Club for Technicians The President’s Club is an exclusive club for our most elite technicians. The criteria are based on both flag hours and clock hours. Any technician that clocks at least 1900 hours and flags at least 2000 hours within a calendar year is eligible. To honor this huge achievement, the technician is invited to attend the Martin Group’s annual Awards Banquet. At the banquet, the hard working team members will be given a recognition plaque and a check based on his or her years with the organization, and are eligible for a company demo. #R4 Service Technician, Service, Mechanic, Automotive Technician, Kia Technician, Kia Tech, Kia Certification, EOE

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Utility Technician will operate various Class A, B, and/or C vehicles (pumper truck, P&D truck, fence truck, container truck, etc.) in support of the operation's needs Responsibilities: • Conducts daily pre-shift & post-shift vehicle inspection & report deficiencies to shop immediately., • Also, report improper operation, faulty equipment, and unusual conditions to the Operations. Manager., • Operates service truck to and from pre-designated work sites based on daily routing information., • Services portable restrooms, holding tanks, septic tanks, sinks, showers, etc., at various work sites by following the Company's servicing guidelines., • Notifies management of any issues encountered on back-up route assigned., • Maintains telephone or radio contact with dispatch to receive additional instructions, changes to work locations, etc., • Maintains truck log according to state and federal regulations., • Follow all established safety rules & regulations., • Operates flat bed truck to and from pre-designated work sites based on daily routing information to deliver or pick-up portable restroom units, hand sinks, holding tanks or containers., • Updates tickets with relevant delivery or pick-up detail., • Operates fence truck to and from pre-designated work sites based on daily routing information to deliver or pick-up fence (chain link, panel, materials, etc.), • Will also act as a lead on fence jobs where a crew is assigned to the job/truck and will operate fence installation equipment., • Operates tanker/transfer truck to and from local dump and completes required paperwork as necessary., • Special projects as assigned by management. Qualifications:, • Minimum two years of commercial driving experience., • Valid Driver License (CDL or non-commercial)., • Excellent time management, customer service and communication skills., • Strong problem-solving and decision-making skills. Physical Requirements:, • Sit while driving and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Push 100lbs and pull 100lbs horizontally Benefit Summary: All full-time employees working an average of 30 hours or more per week are eligible for the following benefits: • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $22.80 – $31.92 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers. #GoPlaces

Job Description The Gas Station attendant is the first point of contact for our gas station customers and we're looking for talented new attendants/cashiers to join us at our Fontana location for part time/full time shifts - now hiring for morning shifts, Afternoon shifts and Night shifts - IMMEDIATE AVAILABILITY - you may apply online or come in person to fill out an application. Minimum Qualifications: Must be 21 years of age. • High school education preferred or equivalent combination of education and experience. Essential Job Functions: • Provide high-quality customer service in accordance with our company standards. • Operate computerized cash register and debit card scanner inside the cashier area, completing customer transactions as well as properly maintaining a cash drawer. • Receive, verify and stock delivered merchandise and place in appropriate storage area. • Perform daily inventory counts, as applicable. • Assist customers with pump issues and propane. • Receive gas delivery from our fuel distributor/tanker truck. • Clean fuel or oil spills from parking area using absorbent materials. • Perform safety inspection of tanks and pumps once per day, checking gaskets, locks, etc. • Maintain and clean various areas of the gas station to include but not limited to restrooms inside convenient store, parking perimeter and dispensers. Job duties and responsibilities may vary by location and employees may be assigned additional duties than those listed above. Must have flexible schedule and ability to work on weekends and Holidays. You must be capable to take on high volumes of customers while attending to other daily tasks that can include lifting up to 25 lbs, preparing hot food, cleaning, stocking, and all the while being friendly. Applicants with FOOD HANDLING CERTIFICATE and REFERENCES are preferred. Practicing suggestive sale is continual as well as ID checks for alcohol and tobacco sale that are automated. Sales are made quickly and efficiently to move traffic inside and outside gas fill-ups. When entering the vicinity there is a sense of organization, high pace procedures in stocking, cleaning, sweeping, mopping, and making sure shelves and racks are free of dust-buildup. Arco ampm gas station and convenience store is one of the top franchise in the market. Value and Commitment makes Arco ampm the brand customer know and approve. Our goal is to service a fast, clean, friendly, and safe environment. Our Core program prefers a 95% or higher team score where individual's tasks are held accountable for point deductions. Security, Robbery, and theft deterrence is practice all the time. Reporting to the sheriff department for robbery, theft, or removal of any business hinderance. Follow company policy with regard to excessive cash. Be alert to shoplifting prevention procedures. • Being fluent in Spanish is a plus., • Military candidates are encouraged to apply, • Pay Frequency: • Bi weekly

Job Description Job Title: Manufacturing General Laborer 2nd Shift 2:30pm- 11pm Job Description This general labor position focuses on performing quality inspections on door hardware components produced by machines. You will visually inspect parts, take measurements, accurately count items, and document inspection results to ensure products meet established quality standards. Responsibilities • Perform visual quality inspections on door hardware pieces produced by machines., • Use measuring tools, including a tape measure, to verify product dimensions and specifications., • Accurately count parts and record quantities in logs or on required documentation., • Document inspection findings clearly and legibly according to established procedures., • Identify and separate defective or nonconforming parts based on inspection criteria., • Maintain a clean and organized work area to support efficient production and inspection., • Follow all safety guidelines and standard operating procedures while working on the production floor., • Sit or stand for extended periods while performing repetitive inspection and counting tasks., • Work collaboratively with production and inspection team members to meet quality and output goals. Essential Skills • Experience performing general labor or production work in a manufacturing or similar environment., • Ability to use a tape measure accurately for basic measurements., • Basic quality control skills, including visual inspection and measuring., • Strong attention to detail to identify defects and ensure accurate counts., • Ability to sit or stand for long periods of time while performing repetitive tasks., • Capability to complete basic documentation and record inspection results clearly. Additional Skills & Qualifications • Previous experience as a production worker or inspector in a hardware or manufacturing setting., • Comfort working in a small team environment., • Reliability and consistency in following established procedures and quality standards. Why Work Here? You will join a small, close-knit team where your attention to detail and reliability directly contribute to the quality of the final product. The environment offers the opportunity to develop hands-on experience in quality inspection and production, with clear procedures and expectations that support success in the role. Work Environment This role is based in a small hardware production facility with a team of approximately nine people. The work is performed on-site in a production and inspection area, requiring extended periods of sitting or standing while inspecting, counting, and documenting door hardware pieces. The facility operates on a 1st and 2nd shift schedule, and you will work closely with a tight-knit team in a structured, task-focused environment. Job Type & Location This is a Contract to Hire position based out of Fontana, CA. Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fontana,CA. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description:\n\nDescription: CLASS A DRIVER NOW OFFERING A $2,000.00 BONUS - CONTACT OUR TALENT ACQUISITION TEAM FOR MORE INFORMATION (562)832-8640 Department: Transportation - Biosolids - Biosolids Operations Location: Bloomington, CA Approximate Hours/Days: 0200-1600 (M-Sat) Classification: Full-Time, Non-Exempt Reports To Operations Manager Position Summary Ecology Auto Parts Inc. is looking for a Commercial Driver to operate a tractor-trailer combination to transport and deliver non-hazardous material (biosolids) using roll off/belt trailers. May be required to load and/or unload truck. Requires a Current Class A Commercial Drivers' License. Hazmat endorsement NOT required. Roll Off experience a plus, will train. Belt trailer and walking floor experience also a plus. This position is a safety sensitive position and requires a clear mind and diligence. The employee has the responsibility for his/her own safety as well as the safety of others. Our trucks are equipped with Video and GPS monitoring systems. This is to ensure your safety, the safety of the company and public. 7 day per week operation with multiple shifts available. ResponsibilitiesServe as a company advocate and ambassador in every interaction with clients and the public.Complete ELD entries.Conduct daily inspections (Pre and Post trip inspections) and perform preventative maintenance on the truck/equipment.Comply with all DOT, state, local and company regulations, procedures, and rules.Always operate Tractor/Trailer in a safe manner.Perform loading, unloading, and timely delivery material to destination.Maintain a clean Tractor/Trailer. Clean off material as needed. Do not travel on the roadway with the product on equipment.Transport materials to various destinations, placing special focus on safety, traffic rules and regulationsAccurately filling out paperwork, including: daily trip reports, vehicle condition reports and customer work order ticketsOperates vehicle in accordance with Ecology Auto Parts, Inc safety and Life Critical Rules, OSHA (Occupational and Safety Health Act) and DOT (Department of Transportation) requirements as well as all local, state and federal laws.Performs pre- and post-trip inspections of assigned vehicle and documents checks utilizing the standard DVIR (Driver Vehicle Inspection Report)Immediately reports all unsafe situations or service-related issues to Operations Manager or DispatchAttends and participates in all scheduled training programs, briefings, and meetings as required by Ecology Auto Parts, Inc. or directed by the Operations Manager.Works closely with Operations Manager to improve route efficiencies and identify best practices.Notifies Operations Manager and Safety Manager of any incidents, accidents, injures, or property damage.Notifies Operations Manager or Dispatch of service interruptions, including blocked containers, closed lots, streets, alleyways or potential safety hazards.Communicates customer requests to Dispatch or Operations ManagerOther duties as assigned DESCRIPCIÓN COMPLETA DEL EMPLEO CHOFER DE BIOSÓLIDOS (CLASE A) AHORA OFRECEMOS UN BONO DE $ 2,000.00 - COMUNÍQUESE CON NUESTRO EQUIPO DE ADQUISICIÓN DE TALENTO PARA OBTENER MÁS INFORMACIÓN (562)832-8640 Departamento: Transportación - Biosólidos - Operaciones de Biosólidos Ubicación: Bloomington, CA – Thermal, CA – Mesa, AZ – Yuma, AZ Horas y Dias Aproximadas: 0200-1600 (Lunes - Sabado) Clasificación: Tiempo Completo, No Exento Reporta a Gerente de Operaciones Resumen del Puesto Ecology Auto Parts, Inc. está buscando Choferes Comerciales para operar una combinación de tractor-remolque y transportar materiales no peligrosos (biosólidos) utilizando remolques roll-off o de banda. Puede ser necesario cargar y/o descargar el camión. Este puesto requiere una licencia comercial Clase A (CDL) válida. No se requiere endoso Hazmat. Se valora experiencia con remolques roll-off; estamos dispuestos a capacitar. También es una ventaja tener experiencia con remolques de banda y pisos móviles. Este puesto es sensible a la seguridad y requiere una mente clara y diligente. El empleado es responsable de su propia seguridad y de la de los demás. Nuestros camiones están equipados con sistemas de monitoreo de video y GPS para garantizar su seguridad, la de la empresa y del público. Este es un puesto en una operación que funciona los 7 días de la semana, con múltiples turnos disponibles. Responsabilidades · Servir como representante y embajador de la empresa en cada interacción con clientes y el público. · Completar registros electrónicos de conducción (ELD). · Realizar inspecciones diarias (inspecciones antes y después del viaje) y realizar mantenimiento preventivo del camión/equipo. · Cumplir con todas las regulaciones del DOT, estatales, locales y políticas de la empresa. · Operar siempre el tractor/remolque de manera segura. · Cargar, descargar y entregar materiales de manera oportuna en el destino. · Mantener limpio el tractor/remolque. Retirar el material según sea necesario y evitar viajar con producto en el equipo. · Transportar materiales a varios destinos, enfocándose especialmente en la seguridad y las reglas de tráfico. · Llenar correctamente la documentación, incluyendo: reportes diarios de viaje, reportes de condición del vehículo y boletos de órdenes de trabajo del cliente. · Operar el vehículo en cumplimiento con las normas de seguridad de Ecology Auto Parts, Inc., las reglas críticas de vida, y los requisitos de OSHA y DOT, así como todas las leyes locales, estatales y federales. · Realizar inspecciones antes y después del viaje del vehículo asignado y documentarlas utilizando el informe estándar de inspección del vehículo (DVIR). · Informar de inmediato cualquier situación insegura o problema relacionado con el servicio al Gerente de Operaciones o Despacho. · Asistir y participar en todos los programas de capacitación, reuniones y sesiones informativas programadas por Ecology Auto Parts, Inc. o indicadas por el Gerente de Operaciones. · Trabajar en estrecha colaboración con el Gerente de Operaciones para mejorar la eficiencia de las rutas e identificar mejores prácticas. · Notificar al Gerente de Operaciones o al Gerente de Seguridad sobre cualquier incidente, accidente, lesión o daño a la propiedad. · Informar al Gerente de Operaciones o Despacho sobre interrupciones del servicio, como contenedores bloqueados, lotes cerrados, calles o callejones intransitables o posibles peligros de seguridad. · Comunicar las solicitudes de los clientes al Despacho o al Gerente de Operaciones. · Otras tareas asignadas. Requirements: Qualifications/Knowledge/Critical SkillsMinimum HS Diploma or equivalent (GED)Current Class A CDL With Tanker endorsement (Valid)Must pass pre-employment drug screen.Must pass pre-employment background check.Must have Clean Driving RecordAbility to haul 40’ to 53’ trailersExperience with Roll Off, Belt, & Walking Floor trailers (HIGHLY PREFERRED)Ability to read and understand a map/GPSAbility to perform physical requirements of the jobAbility to drive truck with a manual and automatic transmissionsAbility to work in all weather conditionsPrevious CDL truck driving experience preferredWaste industry experience, a plusAbility to backup tractor trailer or equipmentAbility to establish and maintain effective working relationships with employees, and clients.Ability to effectively communicate verbally and in writing.Ability to work overtime hours, and/or weekend.Ability to understand and follow instructions.Ability to operate tractor/trailer or equipment in a safe manner. Physical Demands/Environmental FactorsWhile performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hearOccasionally required to stand and walkSitting, Climbing, Balancing, Reaching, Standing, Walking, Lift 50 lbs., Feeling, Talking, Hearing, Visual, and Road hazards.Subject to outside environmental conditions: No effective protection from weather.Subject to hazards: Includes a variety of physical conditions such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to bio-solids.Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focusSome travel required Schedule Monday - Saturday 2:00 AM - 4:00 PM *MUST BE AVAILABLE TO WORK 14 HOUR SHIFTS Compensation The Biosolids Driver position offers a competitive hourly rate of $23.00 - $25.00 per hour. Additionally, we provide a comprehensive benefits package, including medical, dental, and vision insurance, a 401k plan with employer matching, and generous paid time off, and life insurance coverage. The compensation package reflects our commitment to providing a rewarding and competitive remuneration to attract top talent in the industry. PLEASE NOTE: This job description is not exhaustive and is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Ecology Auto Parts Inc. is committed to providing a workplace and culture of respect, diversity, equity, inclusion, and belonging. We are dedicated to ensuring equal employment opportunity without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Should you have a disability or specific needs requiring accommodation, please inform us. Thank you for your interest in opportunities with Ecology Auto Parts, Inc. We appreciate the enthusiasm and professionalism demonstrated by individuals seeking to join our team. Please be advised that Ecology Auto Parts, Inc. does not engage with or entertain solicitations from third-party recruiting firms for our hiring needs. We have a dedicated internal recruitment team managing our talent acquisition process. We kindly request that third-party recruitment firms refrain from submitting candidates for our open positions. Ecology Auto Parts, Inc. will not consider or entertain candidates represented by headhunter agencies for our current requisitions. Our commitment to fair and equitable hiring practices includes working directly with candidates who apply through our official channels. We believe in fostering a transparent and direct relationship with potential team members. We appreciate your understanding and compliance with this policy. If you are interested in joining Ecology Auto Parts, Inc., please visit our official careers page here: EAP, Inc. | Career Center for a list of our current job opportunities and application instructions. Requisitos, Cualificaciones y Habilidades CríticasDiploma de escuela secundaria o equivalente (GED).Licencia CDL Clase A válida con endoso de Tanque.Aprobar prueba de drogas antes del empleo.Aprobar verificación de antecedentes antes del empleo.Historial de conducción limpio.Capacidad para manejar remolques de 40’ a 53’.Experiencia con remolques roll-off, de banda y pisos móviles (ALTAMENTE PREFERIDO).Habilidad para leer y entender mapas/GPS.Capacidad para cumplir con los requisitos físicos del trabajo.Habilidad para conducir camiones con transmisiones manuales y automáticas.Capacidad para trabajar en todas las condiciones climáticas.Experiencia previa como chofer CDL, preferida.Experiencia en la industria de residuos, un plus.Habilidad para retroceder con remolques o equipo.Capacidad para establecer y mantener relaciones de trabajo efectivas con empleados y clientes.Capacidad para comunicarse eficazmente de manera verbal y escrita.Disponibilidad para trabajar horas extra y/o fines de semana.Capacidad para entender y seguir instrucciones.Habilidad para operar tractor/remolque o equipo de manera segura. Demandas Físicas y Factores Ambientales · Durante las funciones del puesto, el empleado deberá sentarse regularmente; usar las manos para tocar, manejar o sentir; extender las manos y brazos; y hablar o escuchar. · Ocasionalmente se requiere estar de pie y caminar. · Incluye sentarse, escalar, mantener el equilibrio, alcanzar, estar de pie, caminar, levantar hasta 50 lbs., tocar, hablar, escuchar, visión y peligros en carretera. · Exposición a condiciones ambientales externas sin protección efectiva contra el clima. · Exposición a riesgos como proximidad a partes mecánicas móviles, vehículos en movimiento, corriente eléctrica, trabajo en andamios y lugares altos, exposición a calor extremo o a biosólidos. · Las habilidades de visión específicas requeridas incluyen visión cercana, lejana, percepción de profundidad y capacidad para ajustar el enfoque. · Se requieren viajes frecuentes. Compensación y Beneficios El puesto de Chofer de Biosólidos ofrece una tarifa competitiva de $23.00 hasta $25.00 por hora. Además, proporcionamos un paquete integral de beneficios, que incluye seguro médico, dental y de visión, un plan 401k con contribución del empleador, generosos días libres pagados y cobertura de seguro de vida. Este paquete refleja nuestro compromiso de proporcionar una remuneración competitiva para atraer al mejor talento de la industria Horario del trabajo Lunes - Sábado 2AM - 4PM DEBE ESTAR DISPONIBLE PARA TURNOS DE 14 HORAS POR FAVOR TOME NOTA: Esta descripción de trabajo no es exhaustiva y no está diseñada para cubrir o contener una lista completa de actividades, deberes o responsabilidades requeridas del empleado. Ecology Auto Parts Inc. está comprometida a proporcionar un entorno laboral y una cultura de respeto, diversidad, equidad, inclusión y sentido de pertenencia. Nos dedicamos a garantizar igualdad de oportunidades de empleo sin importar raza, color, ascendencia, religión, sexo, origen nacional, orientación sexual, edad, ciudadanía, estado civil, discapacidad, identidad de género o condición de veterano. Si tiene alguna discapacidad o necesidades específicas que requieran ajustes, por favor infórmenos. Agradecemos su interés en las oportunidades de Ecology Auto Parts, Inc. Apreciamos el entusiasmo y profesionalismo demostrado por las personas que buscan unirse a nuestro equipo. AVISO IMPORTANTE: Ecology Auto Parts, Inc. no colabora ni considera solicitudes de firmas de reclutamiento de terceros para nuestras necesidades de contratación. Contamos con un equipo interno dedicado a la adquisición de talento que gestiona todo nuestro proceso de reclutamiento. Pedimos amablemente que las firmas de reclutamiento externas se abstengan de enviar candidatos para nuestras vacantes. Ecology Auto Parts, Inc. no considerará ni aceptará candidatos representados por agencias de cazatalentos para nuestras vacantes actuales. Nuestro compromiso con prácticas de contratación justas y equitativas incluye trabajar directamente con los candidatos que apliquen a través de nuestros canales oficiales. Creemos en fomentar una relación transpa

Job DescriptionThe position is based in Bloomington, CA and delivers lubrication and chemical supplies to customers within our geographic region. ESSENTIAL DUTIES & RESPONSIBILITIES: • Perform vehicle pre/post-trip inspection in alignment with corporate and federal regulations, • Operate all equipment within guidelines of corporate or jurisdictional requirements, including all regulations, • Every truck is loaded with the correct product and quantity before exiting the yard, • Deliver bulk and packaged product to the customer after first verifying capacity and product accuracy, • Maintain all required paperwork, including delivery tickets, bills of lading, retain transactions, and logbook if applicable, • Work cooperatively with co-workers and contribute to a pleasant and accommodating work environment through a spirit of teamwork, • Perform all reasonable work-related assignments as requested by the supervisor QUALIFICATIONS: The selected individual must at all times maintain the following in good status: • DOT Medical Certification, • CDL (Class B), • Minimum 2 years related to a commercial driving experience, • Must possess excellent customer service skills including telephone communication PHYSICAL DEMANDS: • Ability to continually lift up to 75+, • Must be able to transition from driver to loader/unloader continuously Job Type: Full-time Experience: Driving: 1 year (Preferred) License: CDL Class B (Required)

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off Competitive pay, great benefits, solid team and family environment! Equal Opportunity Employer Home Every Night! 10-12 Hour Shifts, Roll Off Bins and Compactor Swaps. 5-6 Days Weekly. The position we have available is for experienced Roll Off Drivers and the duties are critical to our continued growth and success. We are looking for a strong minded, intelligent, hardworking, resilient individual with experience and a grasp of trucking, DOT rules and regulations and strong ability to complete proper trucking paperwork. We have our own well-maintained fleet. JOB DUTIES INCLUDE: • Drive Roll off Trucks and drop, switch and dump bins, compactors and roll off flatbeds, • Complete all necessary paperwork for picking up loads, • Execute loads in a timely manner and follow the schedule, • Communicate regularly to dispatch of any issues and status of loads completed, • Complete all daily pre & post trip inspection and report any issues to Dispatch, Management and Mechanics, • Complete 12-hour sheet for proper reporting purposes, • Southern California driving only, • Weigh Vehicle for both heavy and light weights, • Understand and comply with DOT regulations THE RIGHT CANDIDATE WILL POSSESS: • 3 Years CDL Experience, • Knowledge in DOT Guidelines, • Experience with swapping compactors and bins, • Ability to Manually Tarp Roll Off Bins, • Ability to work long hours, in accordance with DOT guidelines, • Quick learner and intelligent, • Team Player, • Ability to work weekends and holidays, • Effective communication and interpersonal skills, • The desire to do the job right every time COMPENSATION PACKAGE: • Starting At $25.00 - $26.50 Depending on Experience, • Health Benefits: Medical, Dental, Vision, Life, • 2 Weeks Accruable Vacation Time, • Paid Holidays

Job DescriptionDescription: JOB SUMMARY: The Bus Driver position will primarily consist of operating gas, diesel, electric, propane or CNG buses while observing state and city speed and safety regulations, as well as company customer service and safety policies. ESSENTIAL FUNCTIONS: Primary Responsibility, Scope of Work, KPI Management, complexity: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Deliver bus to scheduled destination., • Observe any visual defects and checks operating systems before and after all deliveries., • Report emergency or imminent safety conditions to dispatcher., • Report accidents immediately to dispatcher and complete company accident report., • Maintain all required certifications required by DOT and OSHA and company safety programs., • Maintain and protect all property in excellent condition., • Perform any other tasks assigned to support and improve the overall team operations., • Conform with and abide by all regulations, policies, work procedures and instructions., • Conform to all safety rules and use of appropriate safety equipment., • All other duties assigned Management-related: None required for this position. Personnel-Related: None required for this position. Key Performance Indicators (KPI) • Pre-delivery inspection, • On time deliveries, • Form accuracy (delivery, fuel, driver log, timecards, etc.) Leadership: This position has no supervisory responsibilities. Competencies • Technical Capacity., • Customer/Client Focus., • Ethical Conduct., • Time Management Supervisory Responsibilities: This position has no supervisory responsibilities. Work Environment: This position is performed in outside weather conditions including extreme heat and cold. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 7 a.m. to 5 p.m. Occasional overtime may be required. Travel Travel is primarily local during the business day, although some out-of-the-area and overnight travel may be expected. ADDITIONAL RESPONSIBILITIES: Training: • Delivery process, • Driver forms process Requirements: JOB SPECIFICATIONS: (Please describe what is required for satisfactory job performance in each category.) Education and Experience: • Current, Valid Commercial Driver’s License (Class B), • Current Passenger Endorsement., • Current Air Brake Endorsement / Certification., • Current Medical certificate., • 2 or more year(s) of driving experience. Preferred Education and Experience: • High school diploma or GED. Other Duties: • Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Note: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job.

Job Description Hiring CDL Class A OTR Rent - New Semi Trucks SAP Friendly Net $2,500+ a week! Loads & Equipment: • 2024–2026 Trucks • Volvo • Freightliner Fully Equipped: Microwave, Fridge, Inverter, APU • Trailer: 2022+ Dry Van trailer, • Speed: 70mph, • Running area: OTR, • Home Time: 2-3 weeks out, 4 days home, • Dry Van No Touch Freight, all miles paid empty and loaded, with an avg weekly 3500+ miles Pay & Benefits Owner-Operator Position Rent&Lease: • 88% of Gross, • $8.000 - $11.000, • Referral Bonuses, • Cash Advances, • 1099 Position, • DOT Inspection Bonuses, • No Forced Dispatch, • Unlimited Miles – You Decide How Far You Go, • 1-Day Orientation – Fast Start, • 24/7 support - dispatch and maintenance, • Quick Pay - Getting paid after every 48 hours Company Driver Position: • 70 CPM all miles paid - empty and loaded, • 3500 miles average Requirements: • 2+ Years Verifiable CDL A Experience, • Willing to Stay on the Road at Least 3 Weeks, • No Major Violations / No DUI, • SAP Friendly, • For any info, you can reach our team: (872) 259-1406

Job DescriptionDescription: JOB SUMMARY: The Bus Driver position will primarily consist of operating gas, diesel, electric, propane or CNG buses while observing state and city speed and safety regulations, as well as company customer service and safety policies. ESSENTIAL FUNCTIONS: Primary Responsibility, Scope of Work, KPI Management, complexity: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Deliver bus to scheduled destination., • Observe any visual defects and checks operating systems before and after all deliveries., • Report emergency or imminent safety conditions to dispatcher., • Report accidents immediately to dispatcher and complete company accident report., • Maintain all required certifications required by DOT and OSHA and company safety programs., • Maintain and protect all property in excellent condition., • Perform any other tasks assigned to support and improve the overall team operations., • Conform with and abide by all regulations, policies, work procedures and instructions., • Conform to all safety rules and use of appropriate safety equipment., • All other duties assigned Management-related: None required for this position. Personnel-Related: None required for this position. Key Performance Indicators (KPI) • Pre-delivery inspection, • On time deliveries, • Form accuracy (delivery, fuel, driver log, timecards, etc.) Leadership: This position has no supervisory responsibilities. Competencies • Technical Capacity., • Customer/Client Focus., • Ethical Conduct., • Time Management Supervisory Responsibilities: This position has no supervisory responsibilities. Work Environment: This position is performed in outside weather conditions including extreme heat and cold. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 7 a.m. to 5 p.m. Occasional overtime may be required. Travel Travel is primarily local during the business day, although some out-of-the-area and overnight travel may be expected. ADDITIONAL RESPONSIBILITIES: Training: • Delivery process, • Driver forms process Requirements: JOB SPECIFICATIONS: (Please describe what is required for satisfactory job performance in each category.) Education and Experience: • Current, Valid Commercial Driver’s License (Class B), • Current Passenger Endorsement., • Current Air Brake Endorsement / Certification., • Current Medical certificate., • 2 or more year(s) of driving experience. Preferred Education and Experience: • High school diploma or GED. Other Duties: • Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Note: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job.

Job Description GrayMar Environmental Services continues to expand its national footprint while remaining firmly grounded in the values that define who we are. We live by Respect, Integrity, Safe Work Practices, Excellence in Service, and a deep sense of Family - a commitment we proudly call RISE through Caring. We specialize in environmental remediation, health and safety, hazardous materials management, waste disposal, and environmental emergency response. Through comprehensive and sustainable solutions, we help our clients and the communities we serve manage risk, maintain compliance, and protect the environment. Safety is our top priority, and we take pride in our highly skilled, dedicated team that works together to get the job done safely—every time. At GrayMar, every employee is seen, heard, and valued, not as a number, but as a member of our family. Our culture supports continuous learning, professional development, and long-term career growth. We offer a robust benefits package that includes wellness programs, a 401(k) with company matching, spending account options, and comprehensive medical, dental, and vision coverage. We also provide company-paid life and disability coverage (long and short-term), ensuring our employees are supported both in and out of the field. Inclusion at GrayMar is not just an initiative; it is fundamental to how we innovate and grow. We draw strength from diverse experiences and perspectives and foster an inclusive environment where every voice matters. As we continue to grow nationwide, we remain committed to delivering exceptional service to our customers while building a workplace where people feel safe, supported, and proud to belong. Position Overview The CDL A Driver “Driver” reports to the Remediation Department. The Driver is responsible for the transportation of non-hazardous and hazardous waste materials via multiple vehicle types including but not limited to Roll-Offs, Tankers, Box Vans, Air Movers, etc. The Driver also performs tasks under the direct guidance of a supervisor including non-emergency and emergency response activities involving confined space entry such as manholes, tank cleaning, oil spill cleanup, drum handling, decontamination, sweeping and shoveling, high pressure washing and various other remedial activities. This position will support our Remediation projects across the country and must be based out of one of our field offices. This role will include heavy amounts of travel, as needed, along with local work to support the branch's ongoing operations. Key Responsibilities • Ensure Health and Safety is the number one goal by following policies, processes, and always acting in a safe manner., • Adherence and documentation of all transportation compliance requirements including inspection reports, mileage logs, trip reports, etc., • Predominately local work with occasional mandatory out-of-town travel. Additional opportunities to volunteer for extra OTR routes., • Ability to load and unload different types of waste effectively., • Capability to operate light and heavy equipment including skid steers, forklifts, pressure washer, preferred. Providing administrative support to operations team, • Wear personal protective equipment (PPE) properly and adhere to all safety procedures., • Performs labor intensive activities in all weather conditions., • Works in atmospheres with low clearances, confined spaces, and at heights., • Operates light and heavy equipment, not limited to forklifts, aerial lifts, boom lifts, skid steers, excavators, pressure washers, pumps, and other company work vehicles., • Attends mandatory training to earn certifications and obtain information specific to responsibilities., • Ensure all proper paperwork is signed and submitted., • Works “on-call” based on a rotating “on-call” schedule for Emergency Responses. May require out-of-town travel. Length of travel will vary, based on service center and on-going project requirements., • Works “on call” based on a rotating schedule for emergency response., • May require out-of-town travel. Length of travel will be dependent on the service center and ongoing projects., • Willing to comply with ongoing and random drug testing and health physicals as required by the company and our clients., • Perform other related duties as assigned. Desired Qualifications • Strong work ethic with a safety-first mindset., • Ability to work independently or part of a team while managing multiple tasks and deadlines., • Strong work ethic with a safety-first mindset., • Ability to work independently or part of a team while managing multiple tasks and deadlines., • Operation of multiple vehicle types such as Roll-Offs, Tankers, Box Vans and Air Movers, Preferred., • Safety oriented mindset with the determination to follow all procedures and policies., • Hazmat transportation, including placarding and manifesting., • Active listening, coordination, social perceptiveness, and effective operation monitoring., • Able to read, write, and comprehend English, in accordance with DOT guidelines., • Must be able to get to the field office within one hour while on-call., • Demonstrates accountability and punctuality. Education and Experience Required • High school diploma, GED, or equivalent required., • At least 2 years of Class A Driving experience., • Current CDL A with a clean driving record., • Current Tanker and Hazmat Endorsements., • No manual or airbrake restrictions., • One year of previous hazardous materials, contaminated soil, or environmental remediation experience., • 40-hour HAZWOPER experience/certification preferred. Other Requirements • Must be able to pass pre-employment physical, drug screen, and alcohol testing., • Must be able to pass pre-employment background checks., • Must be able to successfully complete OSHA HAZWOPER 40-hour and other mandatory training courses., • Ability to work a rotating shift, including days, nights, weekends, and holidays., • Ability and willingness to travel for extended periods of time, overnight, and on an on-call basis., • Able to read, write, and understand the English language, and able to follow verbal and written instructions., • Must be able to withstand exposure to dust (chemical and environmental), fumes (chemical and fluids), exhaust and highly pressurized fluids., • Must be able to perform physical labor including lifting, pulling, and pushing heavy objects., • Must be able to lift up to 50 pounds repetitively at times., • Must be able to wear PPE., • Must be able to work under adverse conditions (heat & cold). Benefits • Comprehensive health benefits coverage after 60 days of full-time employment., • 401(k) with possible yearly company match., • Company paid STD, LTD, and life insurance., • Company paid time off and holidays., • Career path programs and ongoing company paid training., • Family culture with positive and safe work environments. Disclaimer: This job description may not include all assigned duties, responsibilities, or aspects of the job described and may be amended at any time at the sole discretion of GrayMar Environmental Services, LLC. GrayMar Environmental Services, LLC is an Equal Opportunity Employer. Employment opportunities at GrayMar are based on one’s qualifications and capabilities to perform the essential functions of a particular job. All employment opportunities are provided without regard to race, religion, sex, pregnancy, childbirth or related medical conditions, victims of a QAOV and those with a family member who is a victim of a QAOV, national origin, age, veteran status, disability, genetic information, or any other characteristics protected by law.

Job Description Join the XRG Team: Where Passion for Hospitality Meets Limitless Opportunities! At Xperience Restaurant Group (XRG), our foundation is built on the unwavering dedication of team members who exude a relentless passion for hospitality. We have set our standards high, never settling for anything less than the extraordinary, because at XRG, we believe in delivering not just meals but unforgettable eXperiences. If you're one of those individuals, we invite you to join our XRG Team! Why XRG? Here's a Taste of What We Offer: • Competitive pay: Your hard work deserves more than just a paycheck. Enjoy competitive pay that recognizes your dedication and skills., • Flexibility: Strike the perfect balance between work and life with our flexible hours. Your time matters, and we value your well-being., • Career Growth Opportunities: We thrive on promoting from within, fostering #XperienceRealGrowth for every team member., • Unique Culture: Our Core Values set us apart, making the XRG culture truly unmatched. Join the #XRGFam and eXperience the difference., • Team Member Dining Discounts: Savor the perks of being part of our team with exclusive dining discounts for you and up to 5 guests., • Employee Referral Program: Share the joy of being part of the XRG team with others., • Financial Well-Being: Exclusive Credit Union Benefits, including Checking/Savings, Loans, and Financial Education., • Partner Perks: Unlock discounted rates on theme parks, travel, apparel, sports tickets, and more!, • Sick Time: Offered in eligible states (CA, CO, AZ, MA, MD, WA, NY, NV, IL), we've got you covered!, • Health Insurance: Take care of your well-being with comprehensive health insurance for our full-time team members. Join XRG, where every team member is a valued part of our journey. Discover a workplace that goes beyond expectations, a place where your passion meets endless possibilities. Certified Top Workplaces- 7 years running! Compensation Range: $16.90-19.00/Hour *Range(s) - DOE PURPOSE The janitor is responsible for cleaning buildings, removing debris, and keeping areas neat and tidy. Vacuums and buffs floors, shampoo carpets, empty trash receptacles, and replace the lining of trash cans. DUTIES & RESPONSABILITIES • Clean and supply designated building areas (dusting, sweeping, vacuuming, mopping, cleaning ceiling vents, restroom cleaning, etc), • Perform and document routine inspection and maintenance activities, • Carry out heavy cleansing tasks and special projects, • Notify management of occurring deficiencies or needs for repairs, • Make adjustments and minor repairs, • Stock and maintain supply rooms, • Cooperate with the rest of the staff, • Committed to holding the upmost safety and sanitation standards, • Perform other duties/ tasks/ projects as assigned QUALIFICATIONS & SKILLS • Ability to observe safety and security procedures and to comply with policies, • Ability to read and interpret written information; ability to write clear statements; ability to communicate orally, • Must be able to do physical work and operate power equipment normally found in janitorial operations, • Attention to detail, • Ability to follow schedules and keep commitments, • Ability to follow directions from a supervisor, • Ability to demonstrate professionalism, • Must be able to manage time efficiently and to work individually as well as within a team WORKING CONDITIONS The working conditions described below are representative of those a team member encounters while performing the essential duties and responsibilities of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties and responsibilities of this job. • Excellent communication skills., • Effective verbal and written communication skills, • Work varied shifts to include days, nights, weekends and holidays, • Xperience Restaurant Group is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, disability, sexual orientation, genetic information, veteran status, or any other characteristic protected by state or federal law. PHYSICAL REQUIREMENTS • Proof of eligibility to work in the United States, • 18+years of age Qualified applicants are considered for employment without regard to race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, disability, sexual orientation, genetic information, veteran status, or any other characteristic protected by state or federal law. DISCLAIMER This job description is a summary of duties, which you as a Janitor are expected to perform in your normal course of work. It is by no means an all-inclusive list but is merely a broad guide of expected duties. You should understand that a job description is neither complete nor permanent; it can be modified at any time with or without notice.

Job description HIRING EXPERIENCED ROOFING SALESPERSON ONLY! A&M Premier Roofing & Construction is currently seeking a full-time Roofing Salesperson. We pay extremely well, and Salespeople can expect to make 100k - 350k per year. Our top Salesperson currently makes over 350k, annually.We believe in working for our sales force, versus having our sales force work for us. All of our builds are completed inside of a weeks time, and our turnaround time for each individual job averages less than a month, ensuring commissions are paid quicker than anywhere else. We pay the highest commissions in the Raleigh market and surrounding areas. Benefits: 2022 GMC Truck, Sign on bonus, Phone, incentives/Bonuses, career Advancement, paid in advanced when selling Roofing services and receive referral Bonus.Requirements: • MUST HAVE EXPERIENCE SELLING ROOFING, • Must submit a minimum of 5 jobs per month, • Our Sales personnel are only required to sell. The jobs are managed by our project managers., • Train with a veteran sales representative to learn the process of identifying homes with potential storm damage., • Setting customer appointments for no cost roofing inspection, • Obtain referrals from customers on approved sales/networking., • Methodically manage your sales pipeline via our CRM, • Maintain constant communication with Sales leadership, homeowners and office staff., • Enters Sales/client data into the Client Relationship Management System (CRM)., • Driving to Inspections and adjuster appointments, • Do full roof inspections, • Maintaining a professional appearance, • Excellent customer service and communication skills., • Memorize and recite sales scripts and statements prepared and provided by the employer, • Get information, such as contact details from potential leads and clients for follow-up., • Confidently answer questions and rebuff excuses to meet objectives, • Consistently meet daily and weekly quotas for client information. OTHER REASONS TO APPLY • Relaxed work environment, • We pay off a percentage of the RCV, • Certified Master Elite Contractor, • Best online prescence in the Raleigh metro area, • Leads are provided to our Sales Representatives, • Our CRM plus our sytems and process is more efficient than our competitors This is a remote position. Compensation: $100,000.00 - $350,000.00 per year As a _, A & M Premier Roofing & Construction, LLC is run on principles taught in the military. We conduct our business with integrity and we always treat customers with respect and dignity. We are always on the look-out for highly motivated people who are ready to work in a fun, exciting and dynamic environment. You can expect to be paid above industry standards, because we expect above industry standards from our team. At A & M Premier Roofing & Construction, LLC, we cultivate a family working environment and we treat each other as such. If you are seeking employment with leading local roofers, we would love to meet you!

Burrtec Waste Industries, Inc. is a well-established refuse and recycling collection company serving over fifteen municipalities throughout Southern California and employing over 1900 full time employees. Burrtec continues to grow through acquisitions and successful bid proposals. Burrtec is a family-owned company that firmly believes the key element to our success is knowing how important each employee is in the organization. We have a Maintenance Manager position opening at our Fontana, CA division: POSITION SUMMARY: The Maintenance Manager oversees and maintains an effective fleet maintenance program to ensure that fleet vehicles are maintained in an effective and safety conscious manner. The Maintenance Manager will be able to perform duties in a timely manner and advise leadership of any potential issues that could affect the overall performance and longevity of the fleet. ESSENTIAL DUTIES: • Provide daily guidance and support to on-site technicians to ensure all maintenance work is performed in a safe, efficient and timely manner., • Responsible for maintenance, service, diagnosing, major repair of fleet vehicles and monthly PM compliance (in multiple yards when required), • Ensure shop or facility is clean and kept in a safe, professional working manner, • Plan and schedule team workloads based on preventative maintenance tasks, utilizing budget and personnel, • Manage and maintain company RTA maintenance program, work order data and recurring preventative maintenance schedules., • Ensure vehicle documentation (i.e., registration, insurance, etc.) is current and kept in vehicle as required., • Track and provide recurring maintenance data reports to Management, • Review DVIR (Driver Vehicle Inspection Reports) and distribute the noted defects via work orders to the correct personnel for repair/defect correction and confirmation of Mechanic sign off’s on the DVIR., • Ensure all company safety policies are frequently reviewed, tailgated & enforced. (LOTO, Hot Works, Fall Protection etc.), • Ensure OSHA and DOT & SWPPP compliance, • Report any in yard(s) spills, falls, incidents to Division Manager as required, • Coordinate and direct the activities of all shop personnel including mechanics and welders, • Assign tasks for the mechanical repair of heavy duty refuse trucks, • Maintain parts inventory and container tracking, • Conduct monthly safety training, tailgates, and periodic inspections on maintenance personnel, • Monitor maintenance work flow and ensures tasks are completed in a timely manner and to company standards, • Administer DOT and preventative maintenance programs while ensuring shop personnel is following safe work practices KNOWLEDGE, SKILLS AND ABILITIES: • Strong organizational skills and ability to motivate large groups, • Good decision making, problem solving and communication skills, • Familiarity with DOT and OSHA regulations, • A valid California Driver’s license, required, • Commercial Driver’s license preferred TRAINING AND EXPERIENCE: • Minimum of 5 years’ experience managing a fleet repair facility and heavy duty Mechanics as well as thorough knowledge of HD engines, transmissions and mechanical repairs., • ASE certification for alternative fuels is a plus PHYSICAL: • This position requires that the individual drive, walk, sit, stand, touch, stoop, lift and climb or move heavy objects. WORKING CONDITIONS: • Will be exposed to outdoor weather conditions (heat, rain, wind) and noise levels in the shop, • We offer competitive wages and an excellent benefits package including 401k and 100% paid medical/dental/life insurance and holidays/vacation/PSL.

Our client provides application engineering, technical services, and manufacturing to supply the components you need for your machinery. Their experience and knowledge about your equipment allows us to design parts that truly work… for you! They have over 80 years of combined experience in the paper industry helping customers identify and solve their drive train problems. See below to learn more about our philosophy. The Industrial Sales Representative will provide, support and perform work relating to customer needs through “best practices” in the field. To maintain the highest integrity in representing the company while working with little to no supervision. Deliver a high quality of sale and workmanship while representing the company at all times in the highest standards of professionalism. • Outstanding organizational skills with high attention to detail, • Participate in on-site sales and gear inspections, allowing you to become familiar with our product and your territory, • Develop technical knowledge to effectively communicate products and gear inspection services to customers in your territory, • Build and maintain strong relationships with your customers, understanding their needs and communicating solutions, • Maintain consistent contact with existing customers and make cold calls to prospective customers in your territory, • Responsible for making in-person visits to prospects and existing customers, generating leads and quotes all the way to sale, • Create, submit and follow up on Quotes and RFQ’s, • Document and track progress for new and existing business opportunities; rate high, medium, and low potential, • Maintain accurate records of all interactions with new and existing customers and update the information in the Database, • Provide regular updates on progress, challenges, and opportunities, • Technological capabilities and understanding to communicate in today’s business environment, • 50% Travel., • Maintain monthly itinerary: wall calendar, outlook calendar, • Submit daily briefs and weekly reports (defined at hire), • Ability to read blueprints and drawings, • Ability to descend/ascend on ladders or any other needs to elevate/descend in a safe manner, • Provide services and customer support during field visits, • Tie workflow to schedule, • Manage on-site projects in expected time schedule with little supervision, • Diagnose errors or technical problems and determine proper and cost-effective solutions, • Follow all requirements for time-keeping and billing purposes, • Must hold a valid driver license in good standings, • Operate the vehicle in a safe manner, • Cooperate with technical team and share all information to the company, • Comprehend customer requirements make appropriate recommendations, • Maintain a professional appearance at all times, • Other duties as assigned, • This individual must be a team player and flexible to his(her) job assignments, • Work required hours, • This individual will follow all Company Policies and Standard Operating Procedures, • High School diploma/trade school or College degree (experience also will do in lieu of degree), • Must have 2 years of technical troubleshooting (paper industry experience preferred), • Ability to follow directions with minimal supervision, • Must be able to work individually and as a part of a team, • Must have good sense of smell, hearing, and including good vision as these are of vital importance as safety issues in the Shop, normal working conditions in main office, • Must be able to lift up to 60 pounds$55,000 - $65,000 a yearAbove base plus uncapped commissions with company vehicle. Established customer base that should lead to 6 figure income in first year. Core Values and Beliefs We know that quality relationships with our employees, customers, vendors, and community are the key components to our long term survival. Mission StatementWe will produce quality products at a fair price and on time. We will also provide outstanding customer service. IntegrityOur words and actions will be honest and ethical.RespectWe treat all people with courtesy and respect, valuing their contributions.ResponsibilityWe take responsibility for our actions and honor our obligations while meeting individual, organizational, and community needs.Customer ServiceWe are committed to understanding our customers which allows us to meet or exceed their needs.InnovationWe are constantly looking for ways to improve. We embrace change as an opportunity. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.