Trabajos lift operator en Ontario, CaliforniaCrear alertas

Job DescriptionOur Inland Empire Street cleaning company is hiring a lot porter and equipment operator. Our company is over 28 years old and established in the community. We are seeking a hardworking, reliable person to join our operation. The successful candidate will report directly to the Lead Operator. This is a long term position. Our schedule varies but is usually 5AM-4PM Sunday through Thursday. This is a labor type job requiring outdoor work 12-months a year, in all weather conditions. Salary is dependent upon experience, ranging from $19-22 per hour. Benefits include 401K plan, and paid vacation. This position has the following requirements: · A valid Class C California Drivers License · A clean 10-year driving record. No alcohol related convictions within the past 10-years. · Must be able to read, write and understand English. · Must be able to follow written and oral directions · Must be able to lift 50-lbs · Must be at least 23-years old · Must pass insurance check, pre-employment physical, drug test, and background check. · Must be able to climb in and out of vehicles up to 100 times per day. Job will include alot of walking. · Must possess general mechanical knowledge. Our equipment has many moving parts and may require adjustment in the field. Applicants should provide a resume with a brief work history and include salary history. Job Type: Full-time Salary: $19.00 - $24.00 per hour Benefits: • 401(k) matching, • Paid time off Schedule: • 8 hour shift, • Day shift, • Overtime, • Sunday to Thursday

Job DescriptionProduction Worker – Aerospace Position: Production Worker / Production Operator Pay: $19.50/Hr. to 20/Hr. (DOE) Schedule: Monday–Friday Hours: 7:00 AM–3:30 PM Industry: Aerospace Manufacturing Position Summary We are seeking a dependable and detail-oriented Production Worker to join our Aerospace team. This position will support the manufacturing and assembly of aerospace components while following established production procedures, quality standards, and safety requirements. Sewing experience is preferred but not required. Depending on project needs, this position may also involve working with fiberglass and other manufacturing materials. Responsibilities • Perform a variety of production and assembly tasks according to established procedures., • Operate basic production tools and equipment safely and efficiently., • Perform sewing and fabric-related tasks when applicable., • Work with fiberglass and other materials on designated projects, following appropriate safety procedures., • Inspect finished work for quality, accuracy, and workmanship., • Follow work instructions, production schedules, and quality standards., • Maintain a clean, organized, and safe work area., • Work effectively as part of a team to meet production goals., • Perform other duties related to production as assigned.Qualifications, • Previous manufacturing or production experience is a plus., • Sewing experience is preferred, but not required., • Ability to follow written and verbal instructions., • Strong attention to detail and commitment to quality., • Ability to work consistently in a fast-paced production environment., • Must be dependable and punctual., • Ability to safely handle materials and perform repetitive production tasks., • Bilingual English/Spanish communication skills are a plus.Physical Requirements, • Ability to stand and work for extended periods., • Ability to use hands for repetitive production and assembly tasks., • Ability to lift, carry, and move materials as required for the position., • Ability to wear required personal protective equipment (PPE)., • Ability to work safely with fiberglass and other production materials when assigned.What We Offer:, • Opportunity to gain experience in the aerospace manufacturing industry., • Team-oriented and hands-on work environment. About Kimco/MediQuest/Advantex "Kimco Staffing Services is a rapidly growing, award-winning staffing firm whose purpose is to add real value to our clients and candidates while "Changing lives, One Job at a Time". We have won Best of Staffing Client and Talent satisfaction awards from Clearly Rated for the last 10 years. Only 2% of staffing companies nationwide receive this recognition! We support our teams, candidates, and clients with strong operational excellence and state-of-the-art industry software platforms.PandoLogic. Keywords: Production Worker, Location: Jurupa Valley, CA - 92509 , PL: 604180152

Job Description Job Title: Production Operator Reports To: Production Supervisor Employment Type: Full-Time (Non-Exempt) Department: Production Position Summary: Operate and optimize the wrapper section (including Presto robots and check weighers) to consistently wrap bars to specification. Maintain proper machine speeds/settings to minimize waste, ensure accurate coding, coordinate with upstream/downstream teams, and follow GMP/PPE and safety procedures. Main Job Functions: • Optimize wrapper, robots, and check weighers for performance and minimal loss., • Execute clean shift handoffs; communicate critical watch points to incoming/outgoing operators., • Maintain immediate communication with upstream/downstream operations, team leads, supervisor, and maintenance., • Verify bar coding/printing accuracy; validate encoder operation and update codes when required., • Make simple HMI adjustments and mechanical fine-tuning to maintain proper setup and speeds., • Ensure seal integrity meets visual and vacuum test specifications; document results., • Remove unrelated materials from the room; stage correct materials, tools, and documents for each job., • Ensure wrapper film is properly threaded and downstream packaging equipment is ready to receive product., • Check codes at the packing machine at required frequency and complete the FR-Checking Codes form; change codes per quality specs and validate with supervisor before QC release., • Keep a spare roll prepped and ready; use small/partial rolls first to avoid accumulating incomplete rolls., • Prepare product samples at QC-requested intervals., • Recycle off-spec product using designated bins and return to mixing in a timely manner., • Identify and report unusual noises/mechanical issues immediately; unlock/clear robots to minimize downtime., • Maintain cleanliness of equipment and area; support sanitation/changeover cleaning and correct reassembly., • Continuously scan the work zone for issues that require immediate attention., • Complete all required paperwork accurately and on time; follow all GMP and PPE requirements., • Perform other duties as assigned. Physical Requirements: • Lift up to 50 lbs; frequent pushing/pulling of materials., • Make minor equipment adjustments using basic hand tools., • Stand for extended periods; frequent squatting/bending to make line adjustments. Required Competencies: • Food Safety training; working knowledge of GMP and PPE practices., • Mechanical aptitude; able to make simple HMI and mechanical adjustments., • Intermediate communication skills; able to read/interpret documents and write routine entries., • Bilingual (English/Spanish) preferred., • Ability to work in a high-speed environment and remain calm during emergencies., • Basic math (add, subtract, multiply, divide; decimals/fractions; ratios/percentages); calculator proficient., • Strong teamwork; positive, productive attitude; commitment to company values., • Reliable, on time, takes initiative, meets productivity standards; adapts well to change. Work Environment & Safety: • Food/CPG manufacturing environment with moving equipment, film, sealers, printers, and robotics., • Follow all plant safety rules, GMP, sanitation, and required PPE at all times.

Job Description Auto Case Packer Operator Department: Production Reports To: Production Supervisor Position Summary The Auto Case Pacerk Operator is responsible for the safe and efficient operation of packaging equipment in a high-volume tortilla manufacturing environment. This role ensures product is packaged accurately, meets quality standards, and production targets are achieved with minimal downtime. Key Duties & Responsibilities Machine Operation • Set up, operate, monitor, and adjust packaging equipment on tortilla production lines., • Ensure proper feed, alignment, sealing, weighing, and labeling of finished products., • Perform changeovers for different products, bag sizes, or packaging formats., • Run machinery according to daily production schedules while adhering to quality standards. Quality & Compliance • Inspect packaged product for defects, package integrity, weight accuracy, and labeling accuracy., • Adhere to food safety and Good Manufacturing Practices (GMPs), including HACCP, allergen control, and sanitation procedures., • Report quality issues to supervisors and assist in root-cause identification. Maintenance & Troubleshooting • Conduct routine machine checks and minor corrective adjustments to maintain continuous operations., • Identify mechanical issues and escalate to maintenance teams when required., • Clean packaging equipment following standardized procedures at shift end. Safety • Follow all plant and OSHA safety policies and procedures., • Wear required PPE (hair net, gloves, safety shoes, etc.) and maintain a clean, organized work area., • Participate in daily safety briefings and continuous improvement initiatives. Education & Experience • High school diploma or equivalent is preferred., • Prior experience operating packaging machinery in food manufacturing (tortilla/bakery experience preferred)., • Experience with automated packaging systems is a plus. Skills & Abilities • Mechanical aptitude and attention to detail., • Ability to read basic production documents and follow standard operating procedures., • Strong teamwork, communication skills, and reliability., • Ability to lift up to 50 lbs and stand for extended periods. Working Conditions • Manufacturing environment: moderate noise, fast pace.

Job Description Connect Staffing is hiring a Furnace Operator for a wire manufacturing facility in Fontana, CA. This is a temp-to-hire position paying $19.66/hr. with the possibility of on first shift before transitioning to 2nd shift. In this role, you will operate and monitor industrial furnace equipment used in the wire manufacturing process, loading and unloading wire and production materials and maintaining temperature settings to meet quality standards. This position offers stable hours and long-term placement potential. Pay: $19.66/hr. Schedule: 2nd shift: Sunday–Saturday, 2pm–10:30pm (training on 1st shift) Location: Fontana, CA Job Type: Temp-to-Hire Primary workplace language(s): English / Spanish Work Environment: Manufacturing Plant / Factory Responsibilities • Load and unload wire and production materials into furnace areas safely., • Inspect finished material for quality and notify supervisors of any concerns., • Read and follow production work orders and manufacturing specification sheets., • Record production activity and complete required shift documentation. Minimum Requirements • 6+ months of experience in a metal manufacturing, machine operation, or an industrial environment. Preferred Qualifications • Previous experience operating industrial machinery or manufacturing equipment., • Background in wire, metal, cable, or industrial production environments., • Experience reading production work orders or manufacturing specification sheets., • Forklift or material handling experience., • Ability to communicate effectively in English and Spanish., • You may be a great fit if you've held any of these titles: Production Furnace Operator, Furnace Operator, Heat Treat Operator, Annealing Operator, Industrial Machine Operator, Manufacturing Operator, Metal Processing Operator, Wire Manufacturing Operator, Production Associate, Industrial Production Worker. Pre-Employment Requirements • E-Verify / work authorization required., • Steel toe boots required (employee-provided)., • Ability to stand, bend, lift, and move throughout the shift., • Ability to work in a hot industrial environment around furnace equipment., • Ability to communicate effectively in English and Spanish. Benefits • Weekly pay., • Direct deposit / Paycard., • Health and dental benefits available., • Earn referral bonuses., • CalSavers retirement program available. After you apply, please check your email for a short screening questionnaire from us. Candidates who complete it promptly will be reviewed faster. See all our current openings at jobs.connectstaffing.com #CONHV

Job Description Overview As a Saw Shop Operator, you’ll get to setup our builders for success by setting up and operating power saws to slot, cut, and trim wood for pallet creation! You’ll be the a vital piece of our pallet manufacturing process, and we’re looking for a motivated individual to fill this role! Hourly Pay: $19.00/hr. Shift(s): Monday - Friday 5:00AM - 1:30PM Location: 2641 Hall Ave Riverside, CA 92509 Responsibilities Operate power saws to cut & trim wood pallets Follow and adhere to all safety rules and regulations Communicate to plant management effectively on a regular basis Ability to work overtime as needed Qualifications High School Diploma or GED Ability to lift wooden pallets which weigh about 50 lbs. on a regular basis Previous lumber, warehouse, construction, carpentry, landscaping, roofing, experience highly preferred Quick hands, attention to detail, commitment to quality Ability to communicate effectively Ability to work overtime as needed

Job Description Location: Rhino Container 13950 Ramona Ave. Chino, CA 91710 Reports to: Warehouse Team Leads & Warehouse Manager Employee Type: Full-Time, Hourly Job Objective: Drives gasoline, liquefied gas, or electric powered industrial truck equipped with lifting devices such as forklift, clamps, and elevating platform to push, pull, lift, stack, tier, or move products, equipment, or materials by performing the following duties. Responsibilities: • Load and unload trailers, including pallets and drums, • Put products in the proper areas with rows straight and no leaning product, • Dispose of trash & debris in the correct trash bin, • Keep warehouse neat and organized at all times (Ex: Report Damaged Product, keep aisle straight, sweep floors, clean up messes immediately, etc.), • Work as a packer when needed, • Fill out all paperwork and forms completely (Ex: Lot Documents, Receiving Paperwork, Outbound Packing slips, Etc.), • Responsible for keeping emergency exits cleared at all times, • Keep scale area and racks organized, • Work overtime and weekends as needed, • Other duties as required Relationships and Roles: Internal / External Cooperation • Proactively establishes and maintains effective working team relationships with all support departments and management levels., • Maintains a strong work ethic to maintain competitive positioning and ensure high levels of customer satisfaction. Job Specifications and Education Requirements: • High School Diploma or equivalent required., • Able to communicate well and work in a team environment., • Must be able to work Monday – Friday 8am-4:30pm and overtime/weekends when needed. ENVIRONMENT AND PHYSICAL DEMANDS The following describes the physical activities and work conditions required to perform the essential functions of this Forklift Operator position. A qualified employee may perform the essential functions with or without reasonable accommodation. Frequency definitions: Never (N): 0% of the workday; Occasionally (O): up to 33%; Frequently (F): 34%–66%; Continuously (C): 67%–100%. Actual duration may vary based on production volume, line assignments, material flow, equipment availability, and business needs.

Job Description Certified Forklift Operator / General Labor Location: Ontario, CA Pay: $21.00 per hour Schedule: Full-Time Employment Type: Temporary / Temp-to-Hire Job Summary Employee Force Provider (EFP) is seeking a reliable and experienced Certified Forklift Operator for a client in Ontario, CA. The ideal candidate will have previous forklift and heavy machinery experience, a strong commitment to workplace safety, and the ability to work efficiently in a fast-paced environment. Current forklift certification is required. Heavy machinery experience is a strong plus. This position will also include General Labor (GL) duties as needed. Candidates must be willing and able to assist with general warehouse and labor tasks in addition to operating a forklift. Key Responsibilities • Safely operate a forklift to move, load, unload, and organize materials., • Load and unload trucks and move materials throughout the facility., • Perform general labor and warehouse duties as assigned., • Assist with material handling, staging, sorting, and organizing products., • Inspect forklift and equipment before use and report any safety or maintenance concerns., • Follow all company safety policies, procedures, and OSHA requirements., • Maintain a clean and organized work area., • Assist team members and supervisors with daily warehouse operations., • Perform additional duties as assigned. Qualifications • Current forklift certification is required., • Previous forklift operating experience required., • Heavy machinery experience is strongly preferred., • Must be willing to perform General Labor (GL) duties when needed., • Must be reliable, punctual, and dependable., • Strong understanding of workplace safety procedures., • Ability to safely operate warehouse equipment., • Ability to work independently and as part of a team., • Good communication and attention to detail., • Ability to lift and move materials as required., • Must be willing to follow all company safety policies and procedures. Ideal Candidate We are looking for a reliable, safety-conscious, and hardworking forklift operator who is comfortable operating equipment while also being willing to assist with general labor duties. The right candidate should be flexible, dependable, and willing to help wherever needed to support daily warehouse operations. Pay: $19-21 per hour Location: Ontario, CA Forklift Certification: Required Heavy Machinery Experience: Preferred General Labor Duties: Required as needed \nCompany Description Our company strives to find our associates the right position where they can utilize their skills and experience. Our company strives to find our associates the right position where they can utilize their skills and experience.

Job DescriptionCompany Description $5,000 Sign On Bonus Veolia has acquired Clean Earth. As Clean Earth completes its integration into Veolia, recruiting and hiring for this role is being managed in partnership with the Clean Earth talent acquisition team. Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description In the CDL Driver role, you will be traveling to locations along an assigned route where you will be responsible for packing, transporting, and properly disposing of waste materials in accordance with our environmentally responsible policies and procedures. This position requires the maintenance of records with accuracy and attention to detail, the ability to follow instruction, and to work independently once provided proper training. This position will be mainly local route, occasional overnights. Job Details • Package and transport waste safely according to all federal, state, and local rules and regulations., • Complete required paperwork in accordance with appropriate regulations and customer policies, practices, and procedures., • Load and secure materials and waste or unload truck at various customer sites or Clean Earth locations., • Prepare and load truck with necessary supplies., • Provide the highest level of customer service to assigned accounts daily while communicating any issues to the Manager or Dispatcher for resolution., • Perform a documented pre-trip and post-trip check on assigned truck prior to leaving and closing each day., • Plan schedule/route based on customer needs by reviewing daily paperwork (e.g. manifests, route sheets, etc.)., • Follow routing software route schedule., • Follow all DOT guidelines while driving., • Perform other duties and responsibilities as needed. Qualifications Basic Requirements: • At least 21 years of age, • High School diploma or GED, • Understand, read, and write English, • Able to repeatedly lift and carry up to 75 lbs., • Able to stand, bend, and walk for extended periods of time, • Basic knowledge of Windows-based software (Word, Excel, etc), • Willing and able to wear company-provided personal protective equipment such as eye protection, foot protection, Tyvek coveralls, and respirator (as needed), • Valid Class B Commercial Driver’s License (CDL), • Hazmat and Tanker endorsement, • Able to pass a DOT physical, drug test, and DEA background check Preferred Requirements: • Valid TWIC Card, • At least 1 year of route driving experience, • Knowledge of hazardous materials and OSHA regulations Additional Information Pay range $29.00 - $30.00 hourly Benefits: Comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, tuition reimbursement, paid volunteering and more. In addition, commencing no later than January 1, 2027, benefits package will include participation in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Job Title: Laborer Reports To: Construction Manager Employment Status: Hourly (Non-exempt) We will determine salary based on skills and experience in relation to the function of the role, as well as equity to any other employees in the same or similar role. Job Summary: The Laborer works on the construction site and is responsible for cleaning the site to prepare it, removing hazards, loading and unloading materials, and operating and using various tools and equipment to complete assigned tasks. Duties/Responsibilities: · Attend and participate in morning and afternoon job specific safety / huddle meetings as needed · Operate various tamping machines as per specifications · Inspect machines, equipment and assist with everyday maintenance · Assist with loading, unloading, and preparing of jobsite materials · Maintain neat and clean work area · Inspect and operate hand tools for various activities · Assist the operator with excavation of trenches, placement of shoring and backfilling procedures · Dig entry and exit pits · Placement of conduit in open trenches · Proofing conduits · Potholing existing utilities · Assist with rigging and setting of structures · Forming and pouring of concrete · Prep and placement of asphalt · Maintain safety of company vehicles and ensured optimal utilization · Ensure compliance to customer requirements and completed activities · Observe and promote safety compliance · Complete required safety training annually · Report injuries and other accidents to the foreman · Assist coworkers in ensuring site is clean and organized at the end of each shift · Performs other duties as assigned Required Skills/Abilities: · Valid Driver’s license · Reliable transportation to various jobsites in the area · Subject to pre-employment background check, drug test, and MVR o Subject to random drug screenings · Ability to follow instruction · Strong interpersonal and communication skills with the ability to interact with crew, leadership and clients · Strong understanding of safety procedures and policies · Must be able to meet physical demands of the position; ability to lift up to 75 pounds · Excellent vision or the use of prescription lenses · Exceptional manual dexterity and hand-eye coordination · Perform a variety of manual tasks for extended periods of time in unfavorable weather conditions · Willing to work overtime, nights, and weekends · Willing to work in inclement weather · Willing to work at heights Education and Experience: · High school or equivalent education · Previous experience and knowledge of underground utility construction · Experience in operating small equipment and hand tools Physical Requirements: • Must be able and willing to work outdoors and in inclement weather conditions, • Ability to work a flexible schedule to include: nights, weekends, holidays, and on-call as needed., • Must be able to lift and carry materials of all shapes and sizes, weighing 40 to 90 pounds, • Must be able to maintain visual and audible contact with other crewman and all moving or stationary persons/vehicles/objects to ensure safe coordination of movement, • Must be able to safely operate company vehicles or workaround heavy equipment and machinery, • Must be able to stand or walk for long periods of time, • Must be able to stoop, kneel, crouch and crawl while performing work, • Must be able to ascend and descend ladders, • Must be able to work in small/confined areas, • Must be able to work while wearing safety boots, safety glasses, hardhat, and any applicable safety gear Minimum Required Licenses/Certificates/Registrations: · Valid driver’s license · OSHA 10 All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Job Description: Now Hiring Owner Operator CDL-A Flatbed Truck Drivers! If you are looking for big company resources with a small company feel, you have found the right place to call home. Take your Owner Operator transport business to the next level, by becoming a contractor for System Transport! You call the shots - and not just from the driver seat. We pay special attention to the unique business needs of our owner/operators, providing support for the professional truck driver. Ready to run now? System Transport has exciting flatbed routes ready for the O/O looking to grow their business, and haul vital goods and materials throughout the US. We offer a Great Earning Package, Consistent Freight, a Driver Portal App, 24/7 Support, Generous Fuel Discount Program and so much more! System Transport has been hauling what builds America since 1972! Today, we are still keeping the country running with great drivers like you behind the wheel. You belong here, come drive with us! OPPORTUNITY FOR CDL-A FLATBED TRUCK DRIVER • Driver Type: Owner Operator CDL-A Truck Drivers, • Freight: Flatbed, • Route Type: Regional & OTR Routes FINANCIAL PACKAGE Pay Package: Truck only - 70% of the load Truck and trailer - 80% of the load Weekly settlements by ACH(no factoring) Benefits: Great Earning Package, Consistent Freight, a Driver Portal App, 24/7 Support, Generous Fuel Discount Program, and so much more! Call 1- for more information about our generous pay package. HOW TO GET HIRED! HIRING QUALIFICATIONS: • Required: Must have a valid Class A CDL, • Required: Must be 21 years of age or older, • Required: 4+ monthsof driving experience required, • Required: A safe driving record on the road, • Required: Equipment must be newer than 7 years old, • Required: No more than 6 jobs in the last 3 years, • Preferred: 1 year truck driving experience, but not necessary, • Required: A Background Check is required, • Required: A Clean Drug Test is required, • Required: A Clean Clearinghouse result is required, • Required: For all flatbed driver opportunities, the driver must be physically able to lift a 90-pound tarp onto a 5-foot high platform twice. System Transport will test this during orientation, and flatbed drivers tarp about 70% of our loads. (this is required)System Transport is an Equal Opportunity Employer. We are committed to fair pay and equal opportunity for all employees. Qualified Applicants with arrest or conviction records will be considered for Employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. EQUIPMENT: • We accept both tractor-only and tractor/trailer GREAT EARNING PACKAGE: • Truck only - 70% of the load, • Truck and trailer - 80% of the load, • Weekly settlements by ACH (no factoring) ADDITIONAL BENEFITS: • DRIVER PORTAL: SUPPORT 24/7- Supporting you on the road 24/7 AMERICA PROUD, FLATBED STRONG. COME DRIVE WITH SYSTEM TRANSPORT! CLICK HERE TO APPLY Fill out our short-form application - takes 2 minutes to complete! CALL TODAY! 1- Speak with a System Transport Recruiter, and let us help you find the flatbed route that fits you best! APPLICATION DEADLINE 10/31/2026

Job DescriptionJOB DESCRIPTION Job Title: Warehouse Associate Department: Warehouse Reports to: Warehouse Manager FLSA Status: Non-Exempt Date prepared: 11/19/2025 Travel Requirements: None Summary This position is responsible for maintaining production and distribution of products by picking orders from inventory, replenishing, loading, receiving incoming shipments, delivering production materials and supplies to production utilizing our ERP system. This position works directly with the department supervisor, manager, and team members to ensure uninterrupted supplies thereby enhancing overall team performance. Must be knowledgeable in 3 or more of the following areas OR Crossed Trained in all functions and have responsibilities in Freezer area: • Sales order picking, • Work in sub-zero environments, • Shipping, • Put away, • Inventory cycle counts, • Raw materials picking and delivery. Essential Duties & Job Responsibilities • Storage freezer forklift operator (-10°ree;), • Perform sale and production order fulfillment, • Inventory stock rotation, • Ensures all products are picked using correct stock rotation, • Fill in when other team members are absent (cross-trained in other warehouse functions)., • Pick of ingredients and raw materials for production, • Operates forklift 90% of the time, • Put away/ replenishment, • Report to work as scheduled; be on time from lunch, breaks. And at the beginning of the shift., • Supports internal customers with an excellent customer service attitude, • Follow GMP rules and safety rules., • Complies with all plant, federal, state, OSHA, EPA, FDA, HACCP, and SQF regulations and local warehousing, material handling, and shipping requirements Education & experience • Demonstrate full knowledge of Good Manufacturing Practices policies and procedures., • Must be able to work in a team environment., • Reading (English required and/or Spanish a plus) - High School Level English., • Writing in English- legible., • Forklift certification- status required., • Warehouse knowledge (minimum 2 years required)., • WMS/ERP experience preferred., • Experience in stand-up, and sit-downs, and pallet jacks (2 years required)., • Ability to work in a fast-paced work environment. Communication, Interpersonal and Professional Skills • Must be fluent in English (written and oral). Fluency in Spanish is a plus., • Must be an attentive listener with effective written and verbal communication skills., • Has a sense of urgency and understands the difference between being proactive and reactive. Organizational Skills • Must be detail-oriented and capable of managing multiple tasks at one time., • Can work independently and as a member of a team., • Must be capable of working with deadlines. Initiative • Must be a motivated self-starter., • Must be solution-oriented with a willingness to solve problems or assist in solving problems without hesitation. Physical Demands/work environment • Must be able to stand for a long period of the day., • Must be able to lift 50 pounds cases of product., • Must be able to work in a cold environment (-10°ree;) Must be able to take on other responsibilities that are not part of their regular tasks in the event it is deemed necessary to benefit the organization Essential Physical Requirements: • Forklift Certification preferred (reach truck, rider pallet jack) must be able to pass the forklift certification test, • Experienced in order picking Powered by JazzHR kTVlalJyVH

Job Description Material Flow Specialist – DC Forklift Operations Based in Chino, CA, this role anchors safe, accurate, and efficient product movement across our facility. Is this you? • Do you excel at operating stand-up, sit-down, and cherry picker forklifts with precision?, • Do you enjoy keeping counts accurate, aisles clear, and freight moving?, • Are teamwork, communication, and safety second nature to you? Role snapshot, • Operate forklifts and material handling equipment to move goods through receiving, storage, and shipping., • Load/unload trailers with accuracy; verify quantities and condition of materials., • Maintain a clean, organized workspace while complying with all safety rules., • Assist inventory control by tracking stock levels and reporting discrepancies., • Work cross-functionally to improve processes and throughput., • Complete routine equipment checks and minor upkeep to ensure readiness., • Attend safety and best-practice trainings to remain up to date. Minimum qualifications, • High school diploma or equivalent preferred., • Prior experience as a material handler or similar warehouse position., • Current forklift operator certification (required)., • Knowledge of warehouse safety procedures and compliance standards., • Ability to lift heavy items and handle physical demands., • Strong communicator; effective collaborator on a team., • Detail-focused with dependable organizational habits. Skills and credentials we value, • OSHA 10-Hour Certification (OSHA 10), • Material Handler Experience, • Distribution Experience, • Heavy Material Handling, • Forklift Licensed, • High School / GED, • Excellent Communication Skills, • Experience in a Manufacturing Environment Equipment you’ll operate, • Palletizer, • Forklifts (stand-up, sit-down, cherry picker)

Job Description The statements below are intended to describe the general nature and level of work being performed by associates assigned to this job. This job description is not intended to be an exhaustive list of all responsibilities and skills required of associates so classified. USALCO, LLC is a leading provider of aluminum-based component products used in water treatment, pulp and paper manufacturing, the making of catalysts for oil refining, the housing market and other sectors. The right individual will have a can-do attitude, the ability to be part of a team while operating independently and consistently performs to very high standards. JOB SUMMARY: The person in this role is responsible for manufacturing chemical products while assuring compliance is achieved in all company associated policies. The position requires a motivated, detail oriented, and results driven team player who: • Incorporates safety and quality into every decision while performing day-to-day activities, • Effectively communicates with Supervisor and peers, • Can efficiently operate chemical processes and equipment to safely manufacture quality products., • Will actively seek out opportunities for process improvement and take full responsibility for collaborating with management and peers to implement approved changes in a timely manner. The employee in this position will be a positive-natured, task-oriented individual with chemical manufacturing experience and significant mechanical aptitude. The Chemical Operator is responsible for the safe and efficient operation of plant processes and equipment. The person must possess excellent communication skills necessary to keep Supervisor and peers informed of process status. This person must be personally and professionally motivated to work constructively with team members at all levels within the company, to execute job responsibilities ROLES AND RESPONSIBITIES: 1. Overseeing the safe and efficient operation of the process or processes assigned, including the safe transfer of hazardous chemicals., 2. Apply all plant safety rules, work guidelines / practices, and procedures, 3. Wearing and maintenance of personal protective equipment required for working with hazardous chemicals, 4. Developing and applying improvements in processes, equipment and procedures Daily Responsibilities: • Complete walk-thru of the process and equipment to audit safety and housekeeping, • Perform quality assurance checks for manufactured products, • Adjust formulations to ensure finished products meet specifications, • Assist in loading trailers with products, • Unload raw materials as needed, • Complete Certificates of Compliance for loaded trailers, • Complete all paperwork accurately including batch sheets, run sheets and shift reports, • Maintain and communicate in Daily Management practices for the facility, • Maintenance, • Complete MaintainX work order requests for maintenance issues, • Inspect plant equipment daily and report any issues to Supervisor, • Must be able to work overtime, provide physical labor and work changing shifts as required to meet business requirements., • Perform other duties as assigned in support of business goals and objectives. MINIMUM QUALIFICATIONS: KNOWLEDGE AND SKILLS • Requires planning skills to prioritize daily process operation, • Must be able to pay attention to detail, • Knowledge of chemical manufacturing and equipment, • Must be dependable, flexible and able to respond on short notice to satisfy requirements of customers., • Requires good interpersonal and communication skills., • The ability to clearly and succinctly communicate with others, both verbally and in written form, • Strong Analytical and Mathematical aptitude, • Ability to effectively work with Microsoft Office Applications – Word, Excel and Outlook, • Must be able to obtain Fork Lift certification through USALCO within 30 calendar days of being hired if applicable to site., • Must be able to learn the chemical operator position within 60 calendar days of being hired. EDUCATION: • A High School Diploma or equivalent EXPERIENCE: • Chemical, Pharmaceutical or Food manufacturing environment, preferred, • Chemical manufacturing experience, • Prior Forklift driving experience ESSENTIAL FUNCTIONS: The Ability to: • Must be able to participate in site respirator program (if applicable), pass Spirometry test, and comply to wear one, as required., • Routinely lift up to 75 lbs. throughout the shift, • Routinely stand up to 80% of shift, • Routinely traverse the site to various buildings, • Routinely traverse ship ladders, catwalks and close quarters, • Work at elevated platforms without hesitation or fear USALCO is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As a general policy, USALCO does not offer employment visa sponsorships upon hire or in the future.

Job DescriptionCompany Description Veolia has acquired Clean Earth. As Clean Earth completes its integration into Veolia, recruiting and hiring for this role is being managed in partnership with the Clean Earth talent acquisition team. Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description PRINCIPAL DUTIES AND RESPONSIBILITIES: • Handles hazardous materials including inventorying, identifying, segregating, and packaging waste material in accordance with Lab Pack policies, procedures and practices and all applicable regulations., • Perform onsite services which may include waste collection, consolidation (i.e., bulking, repackaging), sampling, safety/compliance inspections, and other related activities required by the customer/contract., • Assists other business groups, i.e., Depack, Retail and HHW, for both internally and onsite as needed. • Preparing shipment of packaged waste by inspecting, labeling, marking, and loading into the transport vehicle, • Properly completes documentation including shipping papers, Land Disposal Restrictions (LDR’s), evaluations/certifications and other required documentation in accordance with appropriate regulations and procedures., • May require obtaining and maintaining a Commercial Driver’s License (CDL) with Hazmat Endorsement to legally operate Clean Earth vehicles necessary for transporting personnel and waste to and from customers’ job locations., • Follows, understands, and promotes by example, all Health & Safety /Job Safety Analysis (JSA’s) procedures including development of on-site Health &Safety plans/JSA’s as outlined in the procedures and policies., • Performs other duties as assigned. Qualifications Basic Requirements: • An associate’s degree in general science (BS preferred) is required for the Lab Pack Chemist., • Driver’s License with clear record, • Moderate to extensive travel with 2% overnight travel, • Physical ability to lift and move material of various weights frequently exceeding 55 lbs., • Basic understanding of chemistry through general chemistry or biology This position requires a CDL B to be obtained within a 6-month period from your start date. Selected candidates will receive paid training during standard working hours, with Veolia covering the cost of the program. Failure to obtain a CDL B within the 6-month period will mean you are no longer eligible for the Lab Pack Chemist position. This position is also contingent upon successful completion of a DOT physical, DOT Drug Screen and any other DOL or company requirements. Must be willing to travel and Layover when the job requires it. Additional Information Pay range $30.00 - $30.00 Benefits: Comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, tuition reimbursement, paid volunteering and more. In addition, commencing no later than January 1, 2027, benefits package will include participation in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionJob Description: Multicam CNC Router Operator Position Summary: • The Multicam CNC Router Operator is responsible for setting up, operating, and maintaining Multicam CNC routing equipment to accurately cut, shape, and fabricate a variety of materials used in sign manufacturing and Sign products. The operator works closely with production manager, designers, and production personnel to ensure quality standards, production schedules, and safety requirements are consistently met. Essential Duties and Responsibilities: • Set up and operate Multicam CNC routers to produce components according to engineering drawings, work orders, and production schedules., • Load, position, and secure materials including aluminum, acrylic, PVC, wood, ACM, and other sign fabrication materials., • Read and interpret shop drawings, blueprints, CAD files, and production specifications., • Verify material dimensions and inspect finished parts for quality, accuracy, and compliance with specifications., • Make machine adjustments and tool changes as required to maintain quality and efficiency., • Perform routine maintenance and cleaning of CNC equipment and work areas., • Monitor machine performance and troubleshoot basic operational issues., • Collaborate with design and production teams to optimize machining processes and improve efficiency., • Maintain accurate production records and report completed work orders., • Follow all company safety policies and procedures, including proper use of personal protective equipment., • Assist with other fabrication and production activities as needed. Qualifications: • Minimum of 2 years of CNC router operating experience preferred., • Experience operating Multicam CNC routers strongly preferred., • Knowledge of CNC programming software and CAD/CAM systems., • Ability to read and interpret technical drawings and specifications., • Mechanical aptitude and troubleshooting skills., • Ability to work independently and as part of a team., • Physical Requirements, • Ability to stand and walk for extended periods., • Ability to lift and move materials weighing up to 50 pounds., • Ability to bend, stoop, reach, and perform repetitive motions., • Ability to work safely in a manufacturing environment. Preferred Skills: • Experience in the sign manufacturing industry., • Familiarity with EnRoute, or similar CNC programming software. Work Environment:This position operates in a manufacturing facility and may be exposed to machinery noise, dust, and varying temperatures. The employee must adhere to all safety standards and maintain a clean and organized work area.

Job Description Connect Staffing is hiring a CNC Machinist for a medical device and optical lens manufacturing facility in Ontario, CA. This is a temp-to-hire first-shift position paying $20/hr. In this role, you will operate Optoform lathes and mills to machine intraocular lenses (IOLs), then inspect them using microscopes and comparators for surface defects and dimensional accuracy. This is a long-term placement with a globally recognized optical and medical technology company. Pay: $20/hr Schedule: Monday–Friday, 4:00 AM–12:30 PM, must be available to work overtime (10 or 12 hour shift, and Saturdays) as needed Location: Ontario, CA Job Type: Temp-to-Hire Primary workplace language(s): English Work Environment: Manufacturing Plant / Factory Responsibilities • Machine hydrophobic and multifocal intraocular lenses (IOLs) using Optoform lathes and mills in 1PC or 3PC machining cells., • Read and interpret lens drawings and overlays to guide machining and in-process quality inspections., • Measure IOL dimensions, diopter, back focal length (BFL), and image quality to verify parts meet specifications., • Complete work orders and production documentation accurately in accordance with Good Documentation Practices (GDP)., • Monitor, control, and adjust equipment temperature; maintain vacuum lines and troubleshoot utility connections., • Communicate equipment concerns or process issues to leads and supervisors. Minimum Requirements • 1+ year of machining, CNC operation, or precision manufacturing experience. Preferred Qualifications • Experience operating CNC lathes, mills, or similar precision machining equipment., • Familiarity with optical, medical device, or cleanroom manufacturing environments., • Experience using microscopes, comparators, or other optical inspection equipment., • Knowledge of Good Manufacturing Practices (GMP) or Good Documentation Practices (GDP)., • Experience performing in-process quality inspections and recording production data., • Ability to read and interpret technical drawings or manufacturing specifications., • You may be a great fit if you've held any of these titles: CNC Machinist, Precision Machinist, Optical Machinist, Manufacturing Machinist, Machine Operator, CNC Operator, Production Machinist, Lens Machinist, Medical Device Machinist, Quality Control Machinist. Pre-Employment Requirements • Must be authorized to work in the United States, • Background check required., • Drug screen required., • Pre-employment physical exam required., • Must communicate effectively in English., • Ability to lift up to 10 lbs. frequently., • Ability to work at a fast pace in a production environment., • Steel toe boots required (employee-provided). Benefits • Weekly pay., • Direct deposit / Paycard., • Health and dental benefits available., • Earn referral bonuses., • CalSavers retirement program available. #CONHV

Job Description $150/day Per Diem paid all 7 50 hours a week for 2 months We are seeking an experienced Crane Operator to operate a 160-ton Kobelco lattice boom crawler crane. The crane is configured with a 160' main boom and 40' fixed jib. The ideal candidate will have extensive experience operating lattice boom crawler cranes and safely performing heavy lifts in a construction environment. Responsibilities • Safely operate a 160-ton Kobelco lattice boom crawler crane, • Operate with 160' main boom + 40' fixed jib configuration, • Perform heavy lifts, structural steel placement, equipment setting, and other critical lifts, • Follow load charts, lift plans, and manufacturer operating procedures, • Conduct daily crane inspections and complete required documentation, • Work closely with riggers, signalpersons, foremen, and project supervision, • Verify load weights, rigging configurations, clearances, and ground conditions, • Safely position and move loads according to established lift plans, • Monitor crane performance and immediately report mechanical or safety concerns, • Maintain safe operating distances around personnel, structures, power lines, and other equipment, • Follow OSHA, site-specific, and company safety requirements Qualifications • Proven experience operating lattice boom crawler cranes, • Experience operating 160-ton-class cranes preferred, • Experience with Kobelco equipment is a strong plus, • Comfortable operating with long boom and fixed jib configurations, • Ability to read and understand crane load charts and lift plans, • Strong knowledge of crane setup, capacity, radius, and operating limitations, • NCCCO LAT designation, • OSHA 10 certification is a plus, • Strong understanding of rigging and signaling practices, • Excellent safety record and dependable attendance, • Ability to pass a drug screen and site-specific requirements #ITS13

Job Description The CNC Operator II produces machined parts by independently operating computer numerical control (CNC) Punch, Plasma, and Laser combination machines with little to no supervision. This position runs production lots, troubleshoots and edits code as necessary, keeps records, communicates with co-workers and managers regarding production runs, and maintains quality and safety standards. Responsible for operating one or more types of computer numeric- controlled production equipment. Selects appropriate settings and makes adjustments as necessary. Compensation: $26 - $30 hourly Responsibilities: Troubleshoot machine issues and perform tool changes, tool wear offsets, or change inserts. Identify opportunities to reduce machining time through process improvements. Understand, interpret, and edit programming code. Advise the maintenance department or supervisor of any machine issues, crashes, or needed repairs. Complete partial or pre-setups and tear-downs as assigned. Load and unload materials and parts manually or using appropriate equipment or tools. Independently operate CNC equipment and observe operations with focused attention. Operate grinding and related tools to remove excess material or burrs from surfaces. Assure quality by inspecting finished parts; report irregularities or tolerance deviations to supervisor or quality control personnel. Perform tool wear offsets or change inserts to meet tolerance requirements. Monitor progress toward and meet production goals. Follow, create, and help maintain work instructions; complete required daily paperwork. Maintain equipment and worksite by completing housekeeping, preventive maintenance, and daily inspection tasks. Responsible for properly identifying, labeling, and managing hazardous waste generated from machining operations, such as oils, coolants, and contaminated wipes. Ensure all waste is collected in properly labeled, closed containers and stored in designated hazardous waste areas. Report any spills, leaks, or damaged containers. Properly dispose of metal dust and slag as directed by Facilities and EH&S. Other duties as assigned. Qualifications: Required Skills/Abilities: Proficiency with CNC controls. Experience operating CNC punch, plasma, laser, or combination machines. Experience reading part prints or drawings and/or machining work orders. Experience using standard quality inspection tools and gauges. Ability to perform basic mathematical computations, including the ability to apply concepts such as fractions, percentages, ratios, proportions, geometry, and trigonometry to practical situations. Ability to follow written and verbal instructions. Interpersonal communication skills are characterized by honest, professional, respectful communication and effective listening skills. High level of dependability. Flexibility with time and schedule, and availability for overtime. Education and Experience: High school diploma or GED equivalent. 3–5 years of related experience. Physical Requirements: Frequently required to sit and stoop, kneel, crouch, or crawl. Occasionally required to sit and climb or balance. Must be able to occasionally lift and/or move up to 50+ pounds. Specific vision abilities required by this job include the ability to adjust focus. Adaptable and able to maintain performance in loud areas where machines frequently operate. A Statement From Scott Manufacturing Solutions Human Resources Department Scott Manufacturing Solutions has partnered with E-Verify to verify work eligibility in the United States. E-Verify compares employee data from Form I-9 and Employment Eligibility Verification to records held by the DHS and SSA. What Is E-Verify? E-Verify is an Internet-based system that compares information entered by an employer from an employee’s Form I-9, Employment Eligibility Verification, to records available to the U.S. Department of Homeland Security and the Social Security Administration to confirm employment eligibility. E-Verify is administered by SSA and U.S. Citizenship and Immigration Services. About Company Scott Manufacturing Solutions, Inc., a leader in designing and producing medium-voltage pole- and pad-mounted equipment for the American utility and adjacent industries, provides customers with complete, fully customized power distribution solutions built to the highest quality standards. At Scott Manufacturing Solutions, Inc., we see our ESOP (Employee Stock Ownership Plan) structure as a competitive advantage. Each of our employees is a "business owner" with a vested interest in our success. We're also proud of our status as an MBE (Minority Business Enterprise)/DBE Disadvantaged Business Enterprise) supplier that complies with these requirements. We are building a world-class company at Scott Manufacturing Solutions, Inc., and the way we do that is by living our core values, supporting our company's vision, and working together towards one common goal to always be at our best through continuous and never-ending improvements.

Job Description From Engine Bay to Payload, we protect vital structures and systems. Hera Technologies is a premier contract manufacturer specializing in high-precision metallic and non-metallic solutions for the Aerospace, Defense, and Space sectors. Our commitment to quality, innovation, and customer satisfaction has positioned us as an industry leader in the design, manufacturing and maintenance of thermal support systems. Our team is driven by excellence, integrity, and a passion for advancing aerospace technology. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized. Hera Technologies is seeking a dedicated, hands-on OPEX Engineer (Operational Excellence Engineer) to support factory flow optimization and drive continuous improvement across our manufacturing facility. Reporting to the Operational Excellence Lead, this role serves as an engineering engine to advance our site’s continuous improvement (CI) strategy, directly supporting our mission to deliver superior quality, high-precision aerospace solutions on time while fostering a culture grounded in operational excellence, integrity, safety, and teamwork. The ideal candidate brings a solid foundation in industrial or manufacturing engineering principles, practical knowledge of the Toyota Production System (TPS), and a true passion for shop-floor execution. You will spend significant time on the floor conducting time and motion studies, validating process maturity, gathering data, and authoring standard work that drives throughput, quality, cost reduction, and continuous value for our customers. Key Responsibilities • Time & Motion Studies: Conduct rigorous time studies, cycle time evaluations, and process observations to establish accurate baseline metrics, track labor routing, and identify production bottlenecks., • Standard Work Development: Author, optimize, and maintain highly detailed Standard Work, Standard Operating Procedures (SOPs), and work instructions, ensuring they promote strict quality compliance, repeatability, and operator safety., • Site CI Deployment & Process Maturity: Serve as a shop-floor focal for Hera’s continuous improvement initiatives. Assist in conducting process analysis, shop-floor evaluations, and workflow validations to identify waste, improve throughput, and elevate site-wide process maturity., • Kaizen & Root-Cause Problem Solving: Act as a tactical driver for Kaizen events, CI workshops, and root-cause problem solving initiatives (DMAIC / 8D / 5-Why). Perform comprehensive pre-event data collection, analyze current state workflows, and execute ground-level implementations., • TPS & Lean Application: Apply core principles of the Toyota Production System (TPS) daily to identify and eliminate waste in processes, cellular layout configurations, and manufacturing methods., • Visual Factory & 5S Culture: Support the physical rollout and daily maintenance of visual management systems (kanban, production tracking boards) and strictly enforce 5S methodologies across all production work centers to maintain a clean, organized, and safe workplace., • Data Analytics & Productivity Tracking: Meticulously collect, validate, and analyze operational data (routing, labor tracking, yield) to support project selection, root-cause analysis, and project validation. Assist in tracking and reporting out site productivity project funnels to leadership., • Cross-Functional Collaboration & Frontline Coaching: Partner closely with operators, Production, Quality, and Supply Chain teams to ensure smooth rollouts of new standards. Coach frontline employees in basic CI methodologies to strengthen overall site competency, build trust, and drive a proactive continuous improvement cultureRequired Qualifications, • Education: Bachelor of Science degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering, or a related engineering field., • Experience: 1–4 years of practical experience in a continuous improvement, manufacturing engineering, industrial engineering, or operational excellence role., • Methodologies: Solid understanding of Toyota Production System (TPS) principles, Kaizen methodologies, and foundational Lean tools (Value Stream Mapping, 5S, DMAIC)., • Technical Skills: Hands-on experience performing Time & Motion Studies, authoring comprehensive Standard Work, and utilizing process mapping to identify process waste and automation opportunities., • Analytical Mindset: High attention to detail when collecting, validating, and interpreting shop-floor data, with a strong personal commitment to quality and accountability. Proficient in MS Office Suite (Excel, PowerPoint, Word)., • Boots-on-the-Ground Operational Approach: Willingness and desire to spend most of the workday on the production floor observing processes, listening to frontline feedback, and executing practical solutions., • Communication & Teamwork: Strong written and verbal communication skills with the ability to influence cross-functional teams, engage operators constructively, and align with Hera’s collaborative culture.Preferred Qualifications, • Experience in a high-mix, low-to-medium volume aerospace or defense manufacturing environment, • Familiarity with AS9100 quality standards and regulated manufacturing environments, • Exposure to ERP systems and shop floor data integration, • Lean Six Sigma certification (Yellow or Green Belt)Additional Requirements, • Willingness to work overtime (weekdays or weekends), • Ability to use a computer for submitting reports and tracking work orders, • Ability to maintain a clean environment, • Ability to work at heights using a ladder or scissor lift, • Ability to lift, carry, push, and pull up to 50lbs., • Ability to stand and walk for extended periods throughout the shift., • Ability to bend, stoop, and kneel. The above statements are intended to describe the general nature and level of work performed. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. Management may modify or assign additional duties as needed.Job DetailsSalary Range: $80,000 to $100,000Type: Full TimeBusiness Hours: Core Business HoursReports to: Operational Excellence LeadFLSA Classifications: Salary (Exempt) Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Total compensation will also include a comprehensive set of benefits including but not limited to: Company paid employee medical, dental and vision insurance. 401K company match (eligibility required), paid sick leave, paid vacation, paid holidays and discretionary bonuses. EXPORT CONTROL REQUIREMENTS: To conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. Canopy A&D is an Equal Opportunity Employer, employment with Canopy A&D is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description From Engine Bay to Payload, we protect vital structures and systems. Hera Technologies is a premier contract manufacturer specializing in high-precision metallic and non-metallic solutions for the Aerospace, Defense, and Space sectors. Our commitment to quality, innovation, and customer satisfaction has positioned us as an industry leader in the design, manufacturing and maintenance of thermal support systems. Our team is driven by excellence, integrity, and a passion for advancing aerospace technology. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized. Hera Technologies, LLC (the "Company") is seeking a highly motivated CNC Router Machinist/Operator to join its team working in a hands-on, collaborative environment. The candidate must be familiar with a manufacturing environment, have working computer knowledge and be a self-starter who pays attention to detail and accuracy and take responsibility for his/her work. The successful candidate will be responsible for producing machined parts by setting up and operating CNC routers, maintaining quality and safety standards, keeping accurate records, maintaining equipment and other duties as assigned. Key Responsibiliites • Set up and operate machines to produce parts by using work orders, blueprints, material lists, and specifications., • Interprets job instructions such as CNC programs, tool list, job routing, part drawings and in-process quality instructions., • Locates the appropriate tool holders, tools, and fixtures and loads them into the machine., • Staging and prepping of material for cutting., • Determines proper tooling and feed rates per material/Job., • Ensures that the work piece and tools are properly cooled., • Runs the program, takes measurements, and makes any adjustments necessary to produce quality parts., • Modifies programs in response to problems., • Cleans/deburrs parts before transfer to next department., • Inspects first run piece and checks succeeding pieces for conformance to specifications., • Keeping work area clean and organized., • Support 5-S and adhere to health, safety and environmental company guidelines., • Perform cross-functional operations.Required Qualifications, • High school diploma or general education diploma (GED)., • Minimum 2 years' experience in related area., • Ability to read and interpret complex blueprints, drawings, and work orders., • Knowledge of a variety of cutting tools., • Ability to work with shop math., • Ability to use standard measuring tools (i.e. micrometers, calipers), • Ability to communicate effectively in oral and written English., • Ability to learn to perform cross-functional operations., • Willingness to learn.Preferred Qualifications, • Experience with machining of metallics, composites, and plastics., • Experience with Multicam CNC Routers., • Experience with EnRoute CAD/CAM Software. Additional Requirements, • Must have professional working proficiency reading, writing, and speaking English, • Ability to work in office, lab, and manufacturing environments with occasional exposure to noise, chemicals, dust, industrial equipment, and temperature variations, • Ability to sit or stand for extended periods while working at a computer workstation, • Frequent use of hands and fingers for data entry, keyboarding, and mouse use, • Ability to view computer screens for prolonged periods, • Ability to communicate effectively in person, by phone, and via email, • Ability to use a computer to complete assignments, • Ability to work extended hours and weekends as necessary, • Ability to obtain and maintain a US Government Secret security clearance, • Work environment: Machinists spend most of the day on their feet and must follow strict safety rules. They wear safety glasses to protect their eyes from airborne debris. Loud noise from machinery requires use of hearing protectors. They wear hard toe shoes or boots to protect their feet from potentially dropped objects., • Physical demands: Use their hands to handle, control, or feel objects, tools, or controls. Stand for long periods of time. Repeat the same movements. Bend or twist their body. The employee must regularly lift and/or move up to 40 pounds and occasionally lift/or move up to 50 pounds The above statements are intended to describe the general nature and level of work performed. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. Management may modify or assign additional duties as needed. Job Details FLSA Classification: Hourly Non-Exempt Type: Full-time Hourly Pay Range: $20 to $24 Schedule: 1nd shift- Monday to Friday, 6:00am – 2:30pm. OT and weekend work may be necessary based on business demands. Hours may be adjusted at the discretion of your supervisor. Location: 100% onsite at 1055 E. Francis, Ontario, CA 91761 Travel: This role will not typically require travel Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Total compensation will also include a comprehensive set of benefits including but not limited to: Company paid employee medical, dental and vision insurance. 401K company match (eligibility required), paid sick leave, paid vacation, paid holidays and discretionary bonuses. EXPORT CONTROL REQUIREMENTS: To conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. Canopy A&D is an Equal Opportunity Employer, employment with Canopy A&D is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Hot Job LA VERNE, CA 91750 Salary Range $20.00 - $25.00 Hourly Position Type Seasonal Production Driver Seasonal Los Angeles, CA 90015 Thirteenth Floor Entertainment Group is the nation's leading creator of immersive, story-driven entertainmentand proudly the world's largest operator of Halloween attractions. With eighteen markets spanning Florida to California and millions of guests thrilled each year, we don't just produce events. We redefine what's possible. Headquartered in Denver and powered by a team of fearless creators, we've built a culture where curiosity, collaboration, and a relentless drive to go beyond expectations are the standardnot the exception. When you join Thirteenth Floor, you're not just taking a job. You're stepping into the magic behind the screams. Position Summary As a Seasonal Production Driver / Laborer, you will support local event deliveries and assist with loading, unloading, organizing, and handling scenic set pieces, production equipment, tools, and event materials. This role is ideal for someone who is dependable, safety-conscious, physically capable, and comfortable working in a fast-paced production environment. What You'll Do • Safely operate company vehicles for deliveries to and from local event locations., • Drive 15- to 26-foot box trucks, 16- to 26-foot stake-bed trucks, Ford F-250s, and other assigned company vehicles., • Assist with loading and unloading scenic set pieces, production equipment, tools, and event materials., • Secure all loads before transportation using straps, tie-downs, moving blankets, and other appropriate equipment., • Inspect vehicles and loads before departure and report any safety, mechanical, or maintenance concerns., • Follow assigned delivery schedules, routes, parking instructions, loading-dock procedures, and event-site requirements., • Assist production crews with staging, organizing, moving, and placing materials at the shop and event locations., • Handle scenic pieces and production equipment carefully to prevent damage during loading, transportation, and unloading., • Maintain clear communication with the Production Manager, Shop Lead, event staff, and other members of the production team., • Keep company vehicles clean, organized, fueled, and ready for use., • Complete required mileage, fuel, vehicle inspection, and delivery documentation., • Follow all company safety policies, traffic laws, and vehicle-use procedures., • Assist with general production labor and shop-support duties when not actively making deliveries. What You'll Bring • Previous experience driving 15- to 26-foot box trucks., • Previous experience driving 16- to 26-foot stake-bed trucks., • Previous experience operating Ford F-250s or similar work vehicles., • Valid driver's license appropriate for the vehicles being operated., • Clean and acceptable driving record., • Ability to pass a company motor vehicle record review and any required driving qualification process., • Knowledge of safe loading, weight distribution, cargo securement, and transportation practices., • Ability to safely lift and carry up to 50 pounds., • Ability to perform physical labor for extended periods., • Ability to follow written and verbal instructions., • Dependable attendance and punctuality., • Strong awareness of roadway, vehicle, shop, and event-site safety., • Professional attitude and conduct when representing the company., • Ability to work independently and as part of a production team., • Availability to work a flexible seasonal schedule, including early mornings, evenings, weekends, and changing event schedules. Physical Requirements • Ability to repeatedly lift and carry up to 50 pounds., • Ability to stand, walk, bend, reach, kneel, climb, push, and pull for extended periods., • Ability to safely enter and exit trucks, truck beds, loading areas, docks, and event spaces., • Ability to work indoors and outdoors in varying weather and site conditions., • Ability to safely use liftgates, ramps, carts, dollies, pallet jacks, straps, and other loading equipment when assigned., • Ability to work around large scenic pieces, vehicles, machinery, and active production environments. What's Preferred • Previous experience supporting live events, haunted attractions, scenic fabrication, entertainment production, warehouse operations, or event logistics., • Experience transporting large, fragile, heavy, or irregularly shaped scenic elements., • Experience using liftgates, pallet jacks, dollies, carts, ratchet straps, and moving blankets., • Familiarity with Southern California roads, event venues, loading docks, and delivery procedures., • Forklift certification or related material-handling experience is a plus. Driver Requirements Selected candidates must review and sign the company's Driver Conduct and Responsibility Agreement before operating any company vehicle. All driving assignments are contingent upon compliance with company safety and vehicle-use policies. Compensation & Employment Details Hourly Rate: $20 - $25 based on experience. Pursuant to California law, the pay scale for this position is listed above. Thirteenth Floor Entertainment Group will not request or consider salary history in making compensation decisions. Employment Type: Seasonal/Temporary Expected Season Duration: August- November 2026 Work Schedule: Evenings, weekends, and holidays required during the operational season. This is a seasonal/temporary position with an anticipated end date. Employment beyond the stated season is not guaranteed. California Applicant Notices • Thirteenth Floor Entertainment Group will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act, where applicable., • Applicants are entitled to a California applicant privacy notice describing what personal information is collected and how it is used. E-Verify Thirteenth Floor Entertainment Group participates in E-Verify. As required by federal law, we will verify the identity and employment eligibility of all hired individuals. Equal Opportunity Employer Thirteenth Floor Entertainment Group is an equal opportunity employer and complies with all applicable federal, state, and local employment laws. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, sexual orientation, gender identity, gender expression, marital status, national origin, ancestry, disability, age, genetic information, military or veteran status, or any other characteristic protected by law. Reasonable Accommodations Applicants with disabilities may request reasonable accommodations at any point in the hiring process by contacting hr@thirteenthfloor.com.

Veolia has acquired Clean Earth. As Clean Earth completes its integration into Veolia, recruiting and hiring for this role is being managed in partnership with the Clean Earth talent acquisition team. Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. In the CDL Driver role, you will be traveling to locations along an assigned route where you will be responsible for packing, transporting, and properly disposing of waste materials in accordance with our environmentally responsible policies and procedures. This position requires the maintenance of records with accuracy and attention to detail, the ability to follow instruction, and to work independently once provided proper training. This position will be mainly local route, occasional overnights. Job Details • Package and transport waste safely according to all federal, state, and local rules and regulations., • Complete required paperwork in accordance with appropriate regulations and customer policies, practices, and procedures., • Load and secure materials and waste or unload truck at various customer sites or Clean Earth locations., • Prepare and load truck with necessary supplies., • Provide the highest level of customer service to assigned accounts daily while communicating any issues to the Manager or Dispatcher for resolution., • Perform a documented pre-trip and post-trip check on assigned truck prior to leaving and closing each day., • Plan schedule/route based on customer needs by reviewing daily paperwork (e.g. manifests, route sheets, etc.)., • Follow routing software route schedule., • Follow all DOT guidelines while driving., • Perform other duties and responsibilities as needed. Pay range $29.00 $30.00 hourly Qualifications Basic Requirements • At least 21 years of age, • High School diploma or GED, • Understand, read, and write English, • Able to repeatedly lift and carry up to 75 lbs., • Able to stand, bend, and walk for extended periods of time, • Basic knowledge of Windows-based software (Word, Excel, etc), • Willing and able to wear company-provided personal protective equipment such as eye protection, foot protection, Tyvek coveralls, and respirator (as needed), • Valid Class B Commercial Driver's License (CDL), • Hazmat and Tanker endorsement, • Able to pass a DOT physical, drug test, and DEA background check Preferred Requirements • Valid TWIC Card, • At least 1 year of route driving experience, • Knowledge of hazardous materials and OSHA regulations Additional Information Benefits: Comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, tuition reimbursement, paid volunteering and more. In addition, commencing no later than January 1, 2027, benefits package will include participation in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

PrideStaff is currently seeking a 1st Shift Plate Mounter/Forklift Operator for a plastics manufacturing company located in Ontario, CA. This is a full-time, temp to hire opportunity with opportunity for growth! Please see job requirements below to be considered. Pay range: Starting pay is $20 per hour. After an initial training period (usually 1-2 months), pay will increase to as much as $24 per hour depending on proficiency. Shift: 5:00 am to 5:00 pm on an alternative work schedule Responsible for receiving orders, place a plate onto a sleeve, and ensure it is properly aligned. The role requires lifting sleeves that weigh 15-50 lbs. and can be up to 10 feet long. Will also work with solvents (Acetone based) for cleaning plates and sleeves. Will operate a sit-down forklift to help move product. • Maintains inventory of finished goods and production support materials, • Maintains all aspects of housekeeping according to plan policies and procedures, • Responsible for ensuring that the day-to-day operation is consistent with the policies and procedures that make up the Quality System, • Continuously improve the process as an individual and as a team member, • Ensures work area is kept clean according to facility/corporate standards., • Ensure all environmental standards and requirements are met, • Adhere all GMPs, compliance/regulatory mandates and quality requirements., • Must have recent experience in a manufacturing or production environment., • Must have at least 1 to 2 years of related material handling experience in a manufacturing environment., • Must be able to work with cleaning solvents and acetone-based products., • Must be able to lift, stand, walk, lift, and pull throughout the shift., • Must be willing to submit to a drug test and criminal background check prior to start., • Regular, predictable, full attendance is an essential function of the job., • Client requires a resume and interview. The client also requires 2 positive work references., • Competitive pay, • Comprehensive benefits package, • Health Benefits, • Paid Holidays after 1500 hours Compensation / Pay Rate (Up to): $20.00 - $24.00 Per Hour All compensation and pay rates are dependent upon skills and experience. PrideStaff is an equal opportunity employer.

Warehouse & Logistics Temporary On-Site Posted 9 hours, 59 minutes ago Wage negotiable W2 Forklift Operator 2nd Shift Location: Ontario, CA 90620 Schedule: 2nd Shift - Pay: $19.75 Monday - Friday 1:30 PM - 10:00 PM Job Description We are currently seeking experienced Reach Forklift Operators for a clean, professional warehouse facility in Ontario, CA. This is a long-term opportunity for qualified candidates with hands-on experience operating Reach Down Forklift. Candidates must successfully demonstrate and pass equipment skill testing prior to placement. Key Responsibilities Safely and efficiently operate Stand-Up Reach forklifts Perform order picking, put-away, and material movement Meet established productivity and accuracy standards Follow all warehouse safety policies and procedures Maintain a clean, organized, and safe work environment Requirements Ability to pass forklift equipment testing Previous warehouse experience preferred Ability to lift up to 50 lbs as needed Reliable attendance and strong work ethic Why Apply? Competitive pay at $19.75 Opportunity for long-term placement Clean, professional, and safety-focused warehouse environment Fast hiring process for qualified candidates What We Offer Midway Staffing offers a comprehensive benefits package offering Medical, Dental, Vision and Life/AD&D benefit options to all eligible employees About Midway Staffing Midway Staffing is a dynamic and rapidly growing enterprise dedicated to connecting top talent with leading organizations. Specializing in innovative staffing solutions, we are committed to delivering exceptional service to both clients and candidates. With a strong presence spanning multiple locations nationwide and recognition on the prestigious Inc. 5000 list of Fastest-Growing Private Companies in America from 2019 to 2025, Midway Staffing exemplifies excellence and growth. We are equally dedicated to fostering internal development and supporting career advancement opportunities for our team members. Midway Staffing is proud to be an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability status, protected veteran status, or any other legally protected characteristic or group status. We are committed to creating a culturally diverse and inclusive workplace where individuals of all abilities are welcomed and supported. If you require a reasonable accommodation during the application or interview process, please contact us at HR@midwaystaffing.com Include the nature of your request and your contact information, and we will be happy to assist you. CATEGORY Warehouse & Logistics LOCATION Ontario, California PAY RATE Wage negotiable EMPLOYMENT TYPE Temporary W2 POSTED September 18, 2026

We are seeking a skilled and safety-conscious Cherry Picker Forklift Operator to join our dynamic team at our athletic apparel distribution center in Ontario, CA. This role is responsible for efficiently moving, locating, relocating, and stacking merchandise using a cherry picker forklift, while maintaining accuracy and safety standards. Forklift Operators, you'll play a key role in operating cherry pickers and other material handling equipment as needed. This is a fast-paced, hands-on role where accuracy, reliability, and teamwork matter most. Job Duties: • Operate cherry picker forklifts to retrieve and store apparel inventory at various rack heights., • Perform daily equipment inspections and report any issues to maintenance., • Accurately pick, pack, and stage orders for shipment., • Maintain clean and organized work areas in accordance with safety and operational standards., • Assist with cycle counts and inventory audits as needed. Requirements: • High School Diploma or Equivalent, • Technologically literate, with the ability to use a computer and RF scanner, • Must be comfortable working at heights, wearing fall protection equipment, and other personal protective equipment (protective footwear, high visibility vest), • Ability to perform repetitive, precise movements (push, pull, lift), • Lift, push, or pull up to 50 lbs with assistance; 2550 lbs unassisted, • Ability to stand in one area for extended periods of time, • Ability to stand, walk, twist, bend, stoop, and reach frequently

PrideStaff is currently seeking a 1st Shift Stand Up Forklift Operator for a refrigerated/freezer distribution warehouse located in Ontario, CA. This is a full-time, contract to permanent position with opportunity to grow. Please see job requirements below to be considered. Pay Rate: $20.50 - $21.50 per hour to start Monday Friday 4am to 12:30pm, Tuesday - Saturday Job Duties: * MUST BE ABLE TO WORK IN A COLD ENVIRONMENT * Environment is typically 34 degrees and freezers are below zero! • Operate equipment safely and efficiently (equipment to include, but not limited to stand up forklifts, stand up straddle trucks, walk behinds, pallet jacks, double pallet jacks and radio frequency equipment, yard trucks), • Load and unload freight using equipment in an efficient and safe manner, • No case selection or case pick, all freight is handled in full-pallet quantity., • Move product to storage areas with proper equipment., • Check or count freight for accuracy and/or damage, • Assist in maintaining the security of the warehouse, • Conduct operations in a manner, which promotes safety, • Maintain a clean, neat, and orderly work environment, • Comply with OSHA standards, • Report all safety malfunctions on equipment, • Participate in physical inventories, as needed, • Perform labeling, sorting, wrapping, packing, and repacking as needed, • Must be able to meet production standards, • Charge or change forklift battery, as needed, • Perform other duties as assigned, may be required to perform duties outside of their normal responsibilities from time to time, as needed Job Requirements: • Must have at least 3 years of experience on the Stand Up Forklift within a warehouse environment. Must be able to pass a forklift performance test prior to start., • Racking-3 years' experience, • Must have experience working in a refrigerated warehouse., • Must be able to lift up to 50lbs, at a regular pace, throughout the assigned shift, • Must be able to stand, walk, lift, bend, and pull throughout the shift., • Job stability and positive, verifiable work references, • Must have steel toe/composite protective-toe boots., • Outstanding attendance is critical for success in this position. Follow the attendance policy: show up for work on time and ready to work assigned shift, • Must be willing to submit to a background check and drug screening Benefits with PrideStaff: • Competitive pay, • Comprehensive benefits package, • Health Benefits, • Paid Holidays after 1500 hours Compensation / Pay Rate (Up to): $20.50 - $21.50 Per Hour

Humano, a third-party warehouse provider, is seeking Warehouse Order Selectors / Stand Up Fork Lift Operators to join their team. The selected candidates will be responsible for accurately and safely hand selecting orders using electric pallet jacks and stand up fork lifts within various warehouse environments. Shift Information: Sunday 2:00pm until work is completed, Monday-Friday Base pay: $18.25/hour with bonus incentives: • $1/hour for 2nd shift, • $1/hour for working one weekend day Responsibilities: • Operate electric pallet jacks to hand select orders, • Stack products on pallets following operating procedures, • Stage pallets for loading at assigned dock locations, • Maintain selection rates per temperature zones, • Shrink-wrap products to secure loads for transit, manually or using shrink-wrap machines, • Ability to lift up to 55 lbs Qualifications: • Previous experience as a warehouse order selector or picker preferred, • Familiarity with operating electric pallet jacks, • Ability to work in various warehouse temperature environments, • Physical strength and stamina to lift up to 55 lbs, • Strong attention to detail and accuracy in order selection Benefits: • Competitive hourly pay based on productivity metrics, • Medical, dental, vision, 401k, and paid time off benefits, • Opportunities for flexible schedules, overtime, part-time, or full-time positions, • Career growth opportunities with over 90% of the management team promoted from within Company Culture: Humano offers a supportive work environment where employees have the opportunity to grow and develop. The company values teamwork, safety, and provides training on the job. Join a team of dedicated warehouse professionals and become part of a community that promotes career advancement and personal success. Equal Employment Opportunity: Humano is an equal opportunity employer and encourages applicants from diverse backgrounds to apply. Employment decisions are made without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status.

Job Description Lead the Way as a Store Manager at Rebel Convenience Stores! At Rebel Convenience Stores, we don’t just keep things running — we keep them thriving. As a Store Manager Trainee, you’ll gain the skills, knowledge, and hands-on experience needed to step into a leadership role while helping maintain the facilities, equipment, and systems that power our stores. This is more than just a job — it’s the start of a career path designed to prepare you for future management opportunities with one of the fastest-growing convenience store brands in the nation. If you’re ready to inspire a team, elevate the customer experience, and make an impact every day, Rebel is the place to grow your career. What You’ll Do As a Store Manager Trainee, you’ll wear many hats and learn every aspect of our operations: • Hands-On Maintenance & Operations: Learn to diagnose, repair, and maintain store equipment, from pumps and dispensers to HVAC, refrigeration, lighting, and POS systems., • Leadership Development: Gain experience scheduling and prioritizing tasks, reporting on projects, and guiding team members., • Customer & Safety Focus: Ensure our stores are safe, clean, and operating smoothly to deliver the best guest experience., • Problem Solving: Work with contractors, vendors, and team members to resolve maintenance issues quickly and cost-effectively., • Training & Growth: Attend company training programs (local and out-of-area) to build technical and leadership skills for your future management role. Requirements What You Bring • We’re searching for motivated individuals who are ready to take their careers to the next level., • Education: High School Diploma or GED required., • Experience: Maintenance, trade (plumbing, electrical, HVAC), or foodservice background preferred., • Skills: Strong communication, problem-solving, and MS Office knowledge., • Physical Ability: Lift up to 80 lbs, climb ladders, crawl into tight spaces, and work in all weather conditions., • Availability: On-call for emergencies, flexible to work various shifts., • Licensing: Valid Driver’s License and ability to obtain Class “B” UST System Operator Certification (training provided). Benefits Why You’ll Love Working at Rebel • Flexible scheduling, • Paid, hands-on training, • Career growth—we promote from within, • Positive, team-driven culture, • Competitive pay + benefits for full-time employees This position is hourly during training and will pay $19-22 per hour.

eComm Whse Logistics #4093 6720 Kimball Ave Chino, CA 91708-9177 5 open positions CP-4093-11012 $36.65 - $40.15/hr Full time Shift may start between 11:00am - 5:30pm Shift may start between 3:00am - 10:30am Must be at least 18 years old Career opportunities in Distribution Warehouse Maintenance include Battery Changer, Custodial, Licensed Electricians, Maintenance Technicians providing repairs and proactive maintenance on facility equipment. As a member of the Maintenance team, you will be responsible for repairs and preventative maintenance on Distribution Center equipment and the building. This role will Utilize Computerized Maintenance Management System (CMMS) to perform work (e.g., record work history, identify parts usage, identify warranties) in a timely and effective manner. Jobs Include: • General Maintenance Associate, • Maintenance Technician, • Multi Skilled Technician, • Ammonia Refrigeration Technician, • Maintenance Planner Your attention to detail and focus on safety will be critical in these roles. At Walmart, we offer competitive pay as well as performance-based incentive awards and other great benefits for a happier mind, body, and wallet. Health benefits include medical, vision and dental coverage. Financial benefits include 401(k), stock purchase and company-paid life insurance. Paid time off benefits include parental leave, family care leave, bereavement, jury duty, and voting. Other benefits include short-term and long-term disability, company discounts, Military Leave Pay, adoption and surrogacy expense reimbursement, and more. You will also receive PTO and/or PPTO that can be used for vacation, sick leave, holidays, or other purposes. The amount you receive depends on your job classification and length of employment. It will meet or exceed the requirements of paid sick leave laws, where applicable. For information about PTO, see https://one.walmart.com/notices. Live Better U is a Walmart-paid education benefit program for full-time and part-time associates in Walmart and Sam's Club facilities. Programs range from high school completion to bachelor's degrees, including English Language Learning and short-form certificates. Tuition, books, and fees are completely paid for by Walmart. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to a specific plan or program terms. For information about benefits and eligibility, see One.Walmart.com. *The actual hourly rate will equal or exceed the required minimum wage applicable to the job location. Additional compensation includes annual or quarterly performance incentives. Additional compensation in the form of premiums may be paid in amounts ranging from $0.35 per hour to $3.00 per hour in specific circumstances. Premiums may be based on schedule, facility, season, or specific work performed. Multiple premiums may apply if applicable criteria are met. Maintenance Operations • Maintains, repairs, and conducts preventative maintenance on material handling and building equipment in safe and efficient manner., • Utilizes established PM and repair policies and procedures to return equipment to fully operational status, • Read and understand technical drawings (e.g., blueprints, electronic/mechanical schematics) to repair/maintain equipment., • Troubleshoot complex problems with equipment where the repair is not immediately visible or obvious., • Work as a team member with operations and other technicians to support the facility in the repair and maintenance of equipment., • Utilize Computerized Maintenance Management System (CMMS) to understand workload and record actions (e.g., workorders, asset/labor history, inventory usage), • Communicate with (or to) individuals or groups verbally and/or in writing (e.g., customers, suppliers, associates)., • Operate material handling equipment, battery equipment, moving machinery, and other powered equipment., • Daily perform preventive maintenance and repairs on equipment (e.g., lift trucks, pneumatic systems, material handling equipment, hydraulic equipment, dock equipment, banana room equipment, electronic and electrical equipment, etc.) according to procedures. Must Have Maintenance technician positions will require specific qualifications to be met in order to compete for these position. Minimum requirement examples are: • Maintenance Technician, • Coursework or certification in electronic technology and 2 years industrial maintenance experience specializing in electronic technology (e.g. troubleshooting and repairing automated equipment) OR 3 years industrial maintenance experience specializing in electronic technology (e.g. troubleshooting and repairing automated equipment). Ammonia Refrigeration Technician • 1 year experience in industrial refrigeration (e.g. valve rebuilds, working with refrigeration systems); OR 1 year experience with HVAC, • Will obtain the Refrigerating Engineers & Technicians Association (RETA) Certified Assistant Refrigeration Operator (CARO) and Certified Industrial Refrigeration Operator (CIRO) certifications within 30 months of job entry date and will maintain them while employed in this position, • 1 year experience with ammonia refrigeration

Pridestaff is currently seeking a Material Handler/Forklift Operator for a steel manufacturing company located in Rancho Cucamonga, CA. This is a full-time, contract to permanent position with opportunity to grow. Please see job requirements below to be considered. Pay Rate: $18-19 Shift: Monday Friday, 6:30am to 3pm Job Duties: Assist the shipping coordinator with various tasks during the shipping process, such as gathering parts and assemblies and using the InfoSpring tank load builder (shipping app) to create pallets for easier QA tracking, wrapping pallets and transporting materials from one warehouse to another. Roles and responsibilities: • Support the shipment of goods produced to aid in the production/storage of goods destined for sale to our customer base., • Responsible for aiding the final inspector, to ensure product quantities and part numbers match as specified on the job number and drawings and the shipping list., • Must report defective materials or questionable conditions to the department supervisor., • Responsible for keeping an adequate supply of shipping materials on hand at all times., • Required to forward a requisition for shipping materials to the Department Supervisor for approval., • Maintain the work area and equipment in a clean and orderly condition and follow prescribed safety regulations., • General coordination of parts to be cleaned in preparation for coating processes., • (Grinding area) Capable of being part of the internal auditor's team., • Perform Inventory and Cycle Counting., • Replenish materials for the various departments throughout the shift. Physical Demands: • Physical ability to stand for a significant period of time and walk continuously., • Physical ability to occasionally bend, kneel, crouch, reach, or crawl., • Able to lift up to 50lbs Job Requirements: • Must have at least 6 months to 1 year of Warehousing and Forklift experience., • Must be able to operate a propane sit-down forklift safely., • Ability to work outside yard to load and unload when needed., • May assistant in loading and unloading truck deliveries/pick-up., • Ability to utilize computer and related industry software., • Must have Inventory and Cycle counting experience., • Regular, predictable, full attendance is an essential function of the job., • Must have and wear steel toe shoes or boots or composite shoes throughout shift as well as assigned PPE (Ear plugs, safety glasses, etc.), • Must be willing to submit to a drug test and criminal background check prior to start. Benefits with PrideStaff: • Competitive pay, • Comprehensive benefits package, • Health Benefits, • Paid Holidays after 1500 hours Compensation / Pay Rate (Up to): $18.00 - $19.00 Per Hour

2nd Shift: Monday Friday / Start time 1pm - 9:30pm These positions require 6-day work weeks and shifts exceeding 10+ hours per day based on volume. Compensation to Start: $20.00 -$22.00 (Plus a $1/hour shift differential that is exclusive to the 2nd shift.) Responsibilities of the Forklift Operator: • Read and accurately fill customer orders, shipping orders, or requisitions to determine items to be moved, gathered, distributed, and/or shipped., • Unload trucks, check-in products, match purchase orders to sale orders, and assist shipping and receiving. Verifies list of products unloaded against a purchase order to determine if all product was received and note if there are discrepancies (overages, shortages, damages)., • Assemble customer orders on pallets and relocate them to holding or outbound staging areas. May weigh and count items for distribution within the warehouse to ensure the company standards., • Ensure the warehouse is accessible and safe for company and customer traffic. May be assigned facilities maintenance duties as needed (ex: sweep, dust, and mop). Including racking, re-configuration, and product consolidation. Minimum Requirements: • Must be able to do the following with or without reasonable accommodation: stand, walk, lift, twist, turn, lift/push/pull 50 pounds consistently throughout the shift., • Must be able to work required overtime regularly, including 10+ hour shifts, weekends, and holidays., • Good attendance and punctuality: must show up on time, work scheduled shifts, work mandatory overtime, etc., • Ability to multi-task in a fast-moving warehouse environment., • Able to speak and read work orders and understand/clarify verbal instructions. Additional Benefits: • Advancement Opportunities- No degree required!, • Merit increases for performance., • Paid Time Off (Vacation Accrued starting with first check; sick and holiday after 90 days of employment)., • Holiday Premiums for holidays worked (no wait time for this benefit! If your shift starts on a holiday, you will receive a holiday premium even if you are in your first 90 days!), • Low medical premiums for you and your family The company covers 70%, • Paid Life Insurance and AD&D., • Employee Stock Ownership Plan (ESOP) & 401K with Company Matching. (Employees own 42% stock in the company.) E-Verify States Logistics Services Inc participates in E-Verify. All newly hired associates are queried through this electronic system established by the Department of Homeland Security (DHS) and the Social Security Administration (SSA) to verify identity and employment eligibility. A little about who we are: States Logistics Services, Inc. is a third-party logistics company (3PL) specializing in all aspects of supply chain management. Started in 1958, as a warehousing and trucking company with two customers, we have since grown to a fully integrated provider of third-party logistics services with an extensive client base. States Logistics currently has a combination of 13 public and contract warehouses in Southern California and Arizona servicing a wide range of industries. Our focus on service and operational execution has enabled us to be rated the "Best of the Best" within our customers' distribution networks. As an ESOP (Employee Stock Ownership Plan) organization our employees are the shared owners of the company and are dedicated to delivering exceptional levels of service to our customers. States Logistics Services, Inc. is an equal opportunity employer and a drug-free workplace.

MINIMUM 12 MONTHS OF RECENT FORKLIFT EXPERIENCE Connect Staffing is seeking an experienced Forklift Operator to fill an opening at a manufacturing facility in Riverside, CA that produces consumer lawn and garden products, including fertilizers, plant foods, and pest and weed control solutions. Schedule: Monday Friday, 4am12:30pm, plus Saturday OT as needed Requirements for Forklift Operator: 12 months of recent forklift experience (sit-down or stand-up). Pass a background check, E-Verify, and drug screen. Ability to safely lift up to 50 lbs. as needed. Ability to operate forklifts in a warehouse or production setting. Must have steel toe shoes other PPE provided on site. Prior experience in roles such as Forklift Driver, Material Handler, Lift Truck Operator, Warehouse Associate, or Shipping/Receiving Clerk is a big plus! Benefits of the Forklift Operator: Affordable health and dental benefits available CalSavers retirement program available Earn referral bonuses Responsibilities of the Forklift Operator: Operate a forklift or other equipment to move, stack, load, and unload materials. Safely transport finished goods and raw materials within the warehouse and production areas. Perform product counts, checks, and verification of inventory. May perform Order Filler or Checker duties as needed. Maintain a clean and organized work area and follow all safety guidelines. Support production operations as directed by supervisors. All candidates meeting the minimum requirements will receive an SMS invite to an AI-based interview. This interview helps us understand your qualifications and experience, and candidates who complete it will receive first consideration. Please expect a text message from (302) 405-6282 within 30 minutes of submitting your application. See all our current openings and waitlists at jobs.connectstaffing.com! #CONRP

eComm Whse Logistics #4093 6720 Kimball Ave Chino, CA 91708-9177 2 open positions CP-4093-11014 $23.30 - $26.80/hr* Full time Shift may start between 3:00am - 10:30am Must be at least 18 years old Career opportunities in Power Equipment Operator roles include Lift Driver, Motorized Pallet Jack, Stock Picker, Clamp Lift and On Property Yard Driver.

Job DescriptionDescription: About GLS: GLS Group is one of the largest parcel services providers in Europe, with a strong local presence in almost all countries across the continent. It also operates through wholly owned subsidiaries in Canada and on the USA’s West Coast within one GLS network. This allows GLS to seamlessly connect its customers and communities with millions of parcels and stories every day. GLS’ network connects its markets with high velocity and flexibility to respond to their fast-changing and dynamic nature. The company provides high quality service tailored to its customers’ needs across more than 50 countries. The GLS network consists of over 120 hubs and more than 1,600 depots, supported by more than 36,700 vans, light vehicles and walkers, and 6,400 trucks. This offers network resilience, superior flexibility, and extended reach. In 2024/25, GLS generated record revenues of 5.9 billion euros and delivered 926 million parcels across the markets. For more information, visit www.gls-group.com. Purpose of Position: Forklift Operator to safely and efficiently operate a forklift to move, load, and unload materials within our warehouse or production facility. The ideal candidate will have experience with warehouse operations, attention to safety standards, and the ability to follow company procedures. Essential Job Functions: Work directly with the Depot Manager, Depot Supervisor and Cross Dock Supervisor in coordinating the receiving and processing of all inbound freight; supervise, guide, and direct leads and warehouse personnel to ensure all inbound freight is offloaded, processed, sorted, palletized and loaded in a timely manner; inspect pallet quality to reduce damages and miss-routed packages; communicate with managers, leads, and package handlers; coordinate warehouse changes and make adjustments as needed; assist with training new personnel as well as review current/new procedures with staff; estimate pallets weights prior to loading to ensure trucks are below GVWR requirements; communicate with inbound drivers to estimate volumes, assign dock doors, and ensure timely arrivals to the office; perform other related duties as required. The Cross Dock Operations Coordinator is also expected to meet performance standards set by management and to comply with all company policies and procedures. Other duties as assigned. Work Environment: Characteristics are relatively stable and frequently wet and/or humid. Maybe exposed to fumes, airborne particles, extreme heat and vibrations. The noise level is usually loud and the exposure risk to hazardous environmental conditions is moderate. Listed below are applicable special environmental conditions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Standing for prolonged periods of time is required., • Regularly works in outside weather conditions Requirements: Requirements: • High school diploma or equivalent., • Valid forklift operator certification., • Proven experience operating a forklift in a warehouse or manufacturing environment., • Ability to lift heavy materials (up to [insert weight])., • Strong attention to detail and safety protocols., • Good communication and teamwork skills EEO Commitment: General Logistics Systems US is an Equal Employment Opportunity (EEO) employer and is committed to a diverse workforce. We welcome all qualified applicants to apply to at GLS and we strive to select the best qualified applicant for each position in our organization. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. GLS complies with all laws and regulations relating to employment discrimination and is always committed to doing what's right.

Job Description The Fork Lift Reach Operator plays a crucial role in efficiently handling bulk materials and palletized goods within a dynamic warehouse setting. This position requires adept operation of forklifts in 10-hour shifts, ensuring safe load stacking, inventory movement, and order picking. The operator regularly interacts with automated warehouse systems to maintain smooth and safe warehouse navigation. Responsibilities • Handle bulk materials and palletized goods safely and efficiently, • Operate forklift equipment to move and stack loads accurately, • Maintain compliance with safety protocols and procedures, • Perform routine equipment maintenance to ensure reliable operation, • Navigate the warehouse environment, including automated systems, • Pick orders accurately according to instructions, • Assist in managing inventory movement and organization Preferred Qualifications • 1+ years experience in forklift operation, • Forklift operator certification training, • Valid forklift operator license, • Knowledge of safety procedures and load securing techniques, • Basic forklift maintenance skills, • Strong communication and teamwork abilities, • Attention to detail and effective time management\nCompany Description If Interested give us a call ( 951) 482-0082 If Interested give us a call ( 951) 482-0082

Job Description Location: Chino, CA Shift: 3rd Shift | 10:00 PM – 6:30 AM Pay: $17.50–$18.00 per hour, depending on experience. Opportunities for pay increases are available based on performance, attendance, and reliability. Job Summary We are currently seeking a Certified Reach Forklift Operator to join a fast-paced warehouse and distribution team in Chino, CA. This position is ideal for experienced forklift operators who are safety-focused, dependable, and comfortable working in a high-volume warehouse environment. The facility specializes in the manufacturing and distribution of disposable foodservice products, beverage supplies, restaurant packaging, drinkware, cups, straws, containers, and other food packaging solutions. Reach operators play a critical role in moving inventory safely and efficiently throughout the warehouse to support shipping, receiving, and order fulfillment. Responsibilities • Operate a stand-up reach forklift safely and efficiently., • Put away, replenish, and retrieve palletized inventory from high rack locations., • Load and unload products from trailers as needed., • Pick and stage materials for outbound orders., • Transport materials throughout the warehouse while following all safety procedures., • Perform daily forklift inspections and report any equipment issues., • Maintain accurate inventory locations using RF scanners or warehouse management systems., • Keep work areas clean, organized, and free of hazards., • Follow company safety policies and productivity standards., • Assist with general warehouse duties as assigned. Qualifications • Current Reach Forklift Certification required., • Previous experience operating a reach forklift in a warehouse environment., • Ability to lift up to 50 pounds when needed., • Comfortable working in a fast-paced distribution environment., • Strong attention to detail and commitment to workplace safety., • Reliable attendance and punctuality., • Ability to work the full 3rd shift schedule. Benefits • Opportunity for wage increases based on performance and attendance., • Full-time, stable employment., • Supportive team environment., • Opportunities for growth and advancement. Apply today if you're an experienced and certified Reach Forklift Operator looking to join a growing warehouse team in Chino, CA! Company DescriptionOur company strives to find our associates the right position where they can utilize their skills and experience.Our company strives to find our associates the right position where they can utilize their skills and experience.

Job Description Job Summary We are seeking an experienced and dependable Forklift Operator to join our warehouse team. Our company specializes in kitchen products, and this position is responsible for operating various types of material handling equipment to safely move, store, and transport products throughout the warehouse. The ideal candidate has experience operating multiple types of forklifts and enjoys working in a fast-paced environment. Pay Rate: $22.00/hour Schedule: Monday – Friday | 7:00 AM – 3:30 PM Responsibilities • Safely operate sit-down forklifts, stand-up forklifts, and electric pallet jacks., • Load and unload incoming and outgoing shipments., • Move, store, and organize inventory throughout the warehouse., • Pull, stage, and replenish materials for production and shipping., • Perform order picking and material handling as needed., • Inspect equipment before each shift and report any maintenance issues., • Ensure products are handled safely to prevent damage., • Maintain accurate inventory movement and warehouse organization., • Follow all company safety procedures and OSHA regulations., • Assist with general warehouse duties as assigned. Qualifications • Minimum 2 years of recent experience operating:, • Sit-Down Forklift, • Stand-Up Forklift, • Electric Pallet Jack, • Previous warehouse experience required., • Ability to lift up to 50 lbs., • Comfortable working in a fast-paced warehouse environment., • Strong attention to detail and commitment to safety., • Reliable attendance and punctuality., • Forklift certification is a plus (if applicable). \nCompany Description Specializing in the placement of professionals in the logistics & manufacturing world, People First Employment can help you find the job you need to get to the next level! Our goal is to help you with all of your individual needs and give you amazing customer service because we do care about you, hence our company name- People First Employment. Specializing in the placement of professionals in the logistics & manufacturing world, People First Employment can help you find the job you need to get to the next level! Our goal is to help you with all of your individual needs and give you amazing customer service because we do care about you, hence our company name- People First Employment.

Job DescriptionHigh-Reach Warehouse Forklift Operator Location: Ontario, CA 91761 A day in the life Step into our busy distribution floor and take charge of safe, precise product movement. You’ll navigate high-bay racking with a stand-up reach forklift, put away inbound goods, and pull accurate picks for outbound orders. Trucks arrive, containers open, and you’re the one loading and unloading with care. Between moves, you’ll assist with cycle counts and rotate stock so inventory stays accurate. You keep aisles clear, your station orderly, and you never compromise on safety. If a machine isn’t performing right, you flag it immediately. And through it all, you communicate with teammates to meet daily goals and time-sensitive deadlines. What you’ll do • Operate a stand-up reach forklift to place, retrieve, and stage products throughout the warehouse., • Load and unload trailers and containers efficiently and safely., • Support inventory accuracy via counts and first-in/first-out stock rotation., • Follow all equipment protocols, safety rules, and company procedures., • Work closely with the team to hit production targets and timelines., • Keep your work area clean and organized to promote a safe environment., • Report equipment issues or hazards to your supervisor right away.What you’ll bring, • Hands-on experience operating stand-up reach forklifts in a warehouse environment., • Valid forklift certification preferred (training may be available for the right candidate)., • Strong attention to detail and the ability to follow standard operating instructions., • Comfort working in a fast-paced setting with shifting priorities., • Ability to meet key performance indicators (KPIs)., • Clear communication skills and a collaborative attitude., • Physical capability to lift and move heavy items as needed., • High school diploma or GED preferred.Proficiencies, • Warehouse Experience, • Material Handler Experience, • Distribution Experience, • Loading and Unloading Vehicles, • Heavy Material Handling, • Forklift Licensed, • High School / GEDEquipment you’ll handle, • Reach Forklift, • Dock Stocker (Stand-Up Reach or Counterbalance Forklift), • Reach Truck, • Forklifts

Job Description For those who want to keep growing, learning, and evolving. We at Kelly® hear you, and we're here for you! We're seeking a Forklift Operator to work at a leading manufacturing company in Chino, CA. • Pay Rate: $17.75/hr, • Shift: Monday-Friday; 10AM - 6:30PM What's a typical day as a Fork Lift Operator? You'll be: • Operating reach trucks and other material handling equipment to transport, store, and retrieve inventory safely within the warehouse, • Loading, unloading, and transporting materials to designated storage or staging areas, • Accurately picking and replenishing inventory from high-racking locations, • Utilizing warehouse management systems (WMS) and RF scanners to record inventory movement and ensure real-time transaction accuracy, • Following all safety guidelines, protocols, and equipment operating procedures at all times, • Conducting routine equipment safety checks and immediately reporting any maintenance needs or hazards, • Supporting inventory control initiatives, including regular cycle counts and stock reorganization, • Maintaining an organized, clean, and hazard-free work area, • Collaborating with warehouse teammates to hit daily productivity and operational benchmarks, • Adapting to changing floor priorities and assisting with other general warehouse duties as requiredThis job might be an outstanding fit if you:, • Have 1–3 years of experience in warehouse operations or material handling roles, • Possess hands-on experience safely operating reach trucks or similar material handling equipment, • Bring strong knowledge of standard warehouse operations, product handling, and inventory storage procedures, • Can confidently and safely maneuver equipment in high-racking aisles and tight, confined spaces, • Have experience with or exposure to warehouse management systems (WMS) and RF scanning devices, • Demonstrate sharp attention to detail, accuracy, and a commitment to quality, • Are capable of handling the physical requirements of the job, including standing, bending, lifting, and extended equipment operation, • Thrive in a fast-paced, collaborative team environment and bring a reliable, adaptable work ethic, • Have a High School Diploma or equivalent (equipment operator certification preferred) Helping you discover what's next in your career is what we're all about, so let's get to work. Apply to be a Forklift Operator today! As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Please note: The following benefits reflect Kelly's general offerings. Eligibility may vary by assignment, location, and job type. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Find what’s next with Kelly®. As a worker today, it’s up to you to take charge of your career and look for opportunities to learn, grow, and achieve your potential. Helping you find what’s next is what we’re all about. We know what’s going on in the evolving world of work-just ask the 440,000 people we employ each year. Connecting with us means getting the support, guidance, and opportunities needed to take your career where you may have never imagined. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description Pay: $18.00 - $19.00 per hour Job description: Location: Ontario, CA Schedule: Full-Time Job Summary Join our dynamic warehouse team as a Forklift Operator and Warehouse Worker, where your energy and precision will drive our logistics operations forward! In this vital role, you will operate various heavy equipment including forklifts, reach trucks, Hi-Lo, clamp trucks, Cherry picker and pallet jacks to efficiently load, unload, and move materials throughout our distribution center. Your expertise in warehouse management systems and order picking will ensure accurate shipments and inventory control. This position offers an exciting opportunity to contribute to a fast-paced environment that values safety, teamwork, and operational excellence. Duties • Safely operate forklifts, reach trucks, clamp trucks, Hi-Lo equipment, and other heavy machinery to load and unload goods., • Manage order picking processes using warehouse management systems to fulfill customer orders accurately and efficiently., • Conduct routine equipment inspections and perform basic mechanical repairs or notify maintenance for repairs to ensure optimal operation., • Assist with shipping and receiving tasks by verifying inbound and outbound shipments against documentation., • Handle materials with care using pallet jacks and other handling tools to prevent damage and ensure safety., • Support warehouse distribution activities by organizing inventory, stacking pallets, and maintaining a clean work environment in compliance with OSHA standards., • Collaborate with warehouse supervisors to optimize storage layouts, improve workflow processes, and implement safety protocols. Qualifications • Proven experience operating forklifts, reach trucks, Hi-Lo’s, clamp trucks, or similar heavy equipment in a warehouse setting., • Strong knowledge of warehouse management systems (WMS) and order picker technology., • Mechanical aptitude with the ability to perform basic equipment repairs or troubleshoot issues., • Familiarity with OSHA safety standards related to heavy equipment operation and materials handling., • Ability to lift heavy loads safely repeatedly throughout the shift; physical stamina is essential., • Basic math skills for inventory counts, measurements, and documentation accuracy., • Previous experience in shipping & receiving or warehouse distribution is highly preferred., • Valid certification for forklift operation; additional certifications such as warehouse supervisor experience or heavy equipment operation are a plus. Embark on a rewarding career where your skills make a real impact! We prioritize safety, efficiency, and teamwork in every task you undertake—help us keep our operations running smoothly while advancing your professional growth in a vibrant warehouse environment.

You will almost always be the first contact our guests have in the restaurant. The positive first impression made at this point of contact with the guest - where it really counts - will set the standard for making the guest feel welcome. Your professional appearance, smile, great knowledge and positive attitude are just the beginning for our guests great dining experience. Must exemplify our standards of knowledge, skill-service and hospitality. • Greet guests upon arrival, • Taking accurate orders at POS register, processing payment, • Answer guests questions about menu, • Service and hospitality is #1, • Passion to serve others, • Must be reliable and punctual, • Be team-oriented, • Be multi-tasking, • Have organizational skills, • Have excellent communication skills, • Ability to thrive in the fast-paced environment, • Have positive attitude, • Have professional appearance and meet company grooming standards, • Food experience preferred, but not required, • Current food handler certificate, • Ability to carry / lift 15 lbs Compensation: $16.90 per hour BMW Management, Inc. is an independent family operator of Sizzler restaurants in California with locations spanning from San Diego to the Greater Sacramento Area. Since our humble beginning in 1983, BMW's exclusive New Generation Sizzler restaurants have enchanted the hearts and minds of our guests. BMW is a cutting edge and visionary restaurant company developing a legendary dining experience for its guests. Their extreme remodels and new ground up buildings demonstrate a hefty dose of innovation and renovation, which has enhanced the brand, and today, resonates with all generations. BMW's secret to Great, Great Service is a Caring Team! If you believe and live by these personal attributes please apply to Join our Team today: • Heart of service!, • Passion for the guest!, • Teachable!, • Focused on creating positive and memorable relationships!, • Love to smile! BMW's Sizzler steakhouse restaurants proudly serves Certified Angus Beef brand steaks that are cut fresh daily on our premises. Our steaks have unrivaled flavor, juiciness and tenderness and are raised by dedicated family ranchers. Sizzler is where America comes to eat with fresh seafood, delicious chicken and pasta dishes, hand-crafted burgers and sandwiches, slow-cooked BBQ baby back ribs, plus Sizzler's world famous unlimited craft salad bar featuring premium home-style soups, fresh fruit, healthy craft salads all prepared fresh daily, plus a fun ice cream sundae bar enjoyed by all ages! A favorite slogan we love to say is, "Hello appetite, we've been expecting you"! Real food. Made fresh in real kitchens.

Actively Hiring Immediate Openings Hours: Full-time position. Competitive pay & benefits: paid overtime, health, dental, vision, paid time off, 401k with matchand more! WHAT YOU WILL DO: "Quality & Safety are Top Comar Priorities" • Be able to effectively operate equipment as required., • Learning to and with supervision can set up molds and establish process parameters in various molding machines using established documentation, tools, quality and production concepts in accordance with established safety procedures., • Learning to and with supervision can start up machines to produce quality product within validated molding processes., • Learning to and with supervision can operates Injection molding machines and auxiliary equipment to manufacture product which conforms to quality specifications, at the rated output., • Learning to and with supervision can perform and maintain safe and efficient tool and machine set-up, operation, and process capabilities to meet customer on-time delivery and quality expectations., • Learning to and with supervision can perform startups including completion of all required quality management system documentation., • For end- to-end molding through secondary packaging equipment Learning to and with supervision can troubleshoot quality/part issues by confirming plastic conditions and performing root cause analysis to determine true root cause solutions., • Learning to and with supervision can verify process parameters prior to start up and assure process is running to validated parameters., • Learning to and with supervision can Identify machine problems and communicate to maintenance as required., • Learning to and with supervision can resolve basic mold issues and/or secondary packing equipment issues., • Learning to and with supervision can Work with other molding team members to keep equipment running during breaks and callouts., • Learning to and with supervision can Perform thorough product inspections and make appropriate decisions relative to product quality requirements., • Work flexible shifts and overtime as needed and maintain reliable attendance., • Maintain a clean and safe work environment., • Adhere to and communicate to others all plant Health, Safety and Quality guidelines and GMP., • Other duties as assigned. Additional Responsibilities & Skills for our SQF Certified Sites: • Have a basic understanding of the cGMPs and Good Hygiene Personnel Practices, • Notify SQF Practitioner and/or Supervisor of any repairs or adjustments that are required., • Perform Basic Sanitation Functions, • Perform all duties necessary to meet Company, and or Regulatory Requirements / standards as prioritized by the Company, HACCP, and SQF., • Notify SQF Practitioner/Quality Manager or any other Management personnel of ANY Food Safety or Quality issues., • Identify problems relating to Food Safety and the Quality of the raw material, processes, quality system, or safety system, by performing Production/Quality Checks as assigned., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system. Be able to execute and follow the HOLD SOP., • Controls further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected., • Employee follows all Food Fraud/food Defense Policies while on company property., • Thorough understanding of all Company policies, including GMP's and safety policies, HACCP & SQF. Safety and Cleanliness • Adhere to safety policies., • Maintain a clean and safe work area and report any unsafe conditions to supervisor., • Wear company issued personal protective equipment (PPE) such as uniforms, gloves, hairnets. WHO WE ARE LOOKING FOR: "A Comar employee who will represent the customer and be the consumer's advocate" Are You? • A High school or equivalent graduate with a minimum of 2 years of related experience as a Manufacturing Production Operator III or Set Up Mechanic., • Proficient in basic computer use with the ability to learn new systems quickly and efficiently., • Knowledge of raw materials and product quality specifications., • Proficient producing product with molds, mold, and packaging equipment., • Proficient with controlled documents (Work Instructions, Forms, Standard Operating Procedures, Safety & Quality specifications, etc.), preventative maintenance task lists and equipment manuals which pertain to operation of equipment., • An understanding of continuous improvement, six sigma or lean manufacturing concepts. Preferred: • Vocational or trade school in related trade., • Pursuing RJG certification, • 2+ years of experience working in a manufacturing environment using Injection or Extrusion Blow Molding mold machines., • Self-motivated, conscientious, with a results-oriented mindset., • Good time management, organizational and communication skills to work independently and also in a team environment., • Ability to read and follow verbal and written instructions; write simple correspondence., • Proficient with computers Can log in to IQ and accurately enter production data and complete production forms (batch record), • Basic math skills - add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, percentages and decimals., • Ability to use measuring devices such as Comparator, Dial indicator, Go/No Go gauges., • Use Quality Control instruments such as calipers, gram scales and magna mike., • Ability to work in a fast-paced manufacturing environment with demonstrated ability to handle and prioritize multiple tasks and demands., • Strong technical aptitude, as well as analytical and problem-solving skills., • Sound judgment - ability to work efficiently with many competing demands., • Effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization., • Effectively communicate with supervisor., • The ability to read, write, and comprehend information provided. Do you Enjoy Physical Work where you will? • Stand for most of the work shift., • Use hands and fingers to handle or feel; reach with hands and arms; stoop, crouch, bend, twist, and only occasionally sit., • Lift and/or move up to 10 pounds. Heavier amounts can be moved with assistance of equipment. If YES, don't delay, Apply Today! Compensation The compensation entry point for this role is $ 20.07 /hour This position is eligible for a comprehensive benefits package including medical, dental, 401(k), tuition reimbursement, and additional ancillary benefits available upon request. EEOC Comar is an EOE/Veterans/Disabled/LGBT employer and all qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex or any other legally protected category. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Flynn Group, founded by Greg Flynn started its journey with the acquisition of 8 Applebee's in 1999. Over the next two decades we grew by building new stores and acquiring other franchise operators to become the largest Applebee's franchisee in the world. This strong foundation is what allowed Flynn Group to expand into other brands, countries, and industries. We have over 460 Applebee's restaurants in 24 states. Flynn Applebee's is one of seven premier brands of Flynn Group, which has grown to be the largest franchise operator in the world. Flynn owns and operates a diversified portfolio of restaurants in iconic, world class brands across diverse segments, including Applebee's, Arby's, Panera Bread, Pizza Hut, Taco Bell, Wendy's and Planet Fitness. Our primary mission is to be the premier operator within each of these brands. We will achieve this by focusing on our core values; Care Genuinely for People, Play like a Champion, and Win as One. Position Description As an Applebee's Assistant Manager, you will be engaged in all aspects of the day-to-day operations at the restaurant. You are responsible for getting guests and staff passionate about their experience every day at Applebee's. You will need to be team leader, excellent problem solver, handle stress and rise above. You will work hard, but have an outstanding time doing it! Essential Duties and Responsibilities • Ensures timely, friendly service according to company guidelines, achieving established objectives of the unit., • Cultivates a culture in accordance with the Flynn Applebee's Premier Card of our core values and beliefs., • Ensures the immediate response and correction of all verbal guest complaints to self and staff., • Ensures guest contact as a priority with completion of required table visits established by Flynn Applebee's standards., • Maintains departmental inventory levels., • Ensures product preparation and presentation uncompromisingly meeting company standards by performing line checks., • Effectively schedules employees to meet sales demands., • Maintains effective safety and security programs., • Promotes and leads restaurant organization, cleanliness and sanitation., • Performs routine maintenance and immediately reports to the General Manager/Area Director of needed repairs., • Promotes quality recruitment and referrals of potential team member and management candidates., • Promotes Flynn | Applebee's training procedures for new managers., • Helps maintain a trained staff through effective use of employment orientation, individual training sessions, employee meetings and implementation of company policy and training systems., • Participates in the constant development of employees using One-on-One and performance documentation, and contributes to the completion of written evaluations., • Assesses the efficiency of employees, provides fair feedback on a regular basis, and continuously works with employees on their areas of development., • Monitors acceptable employee performance and documents situations that require or could lead to disciplinary or corrective action., • Assures compliance with company policies, practices and procedures., • Responsible for controlling cost in assigned department., • Compliance with local, state and federal laws, regulations and guidelines., • Drives bi-weekly / weekly food and liquor inventories at the AD/GM's request and is accountable for completion., • Responsible for preparing and submitting accurate daily paperwork., • Assures sanitation standards meet or exceed Health Department and Flynn Applebee's standards., • Provides a role model for managers and employees., • Develops self on all store related technology., • Must be willing and able to work in all positions and assist in a team member position as needed when in a restaurant. This includes cooking on the line, expo, seating guests, bartending, etc., • Uses the Management Development Program for continuous growth of leadership skills and proficiencies. Education and Experience • At least 2-3 years restaurant management experience, • Serve Safe Food and Serve Safe Alcohol Certifications also a plus Physical Standards: Must have the ability to: • Work various shifts ranging in hours, including weekends., • Stand and exert well-paced mobility for up to ten (10) hours in length., • Safely lift pots, pans, glassware, boxes, etc. up to 50 pounds in weight., • Read and write to facilitate communication. Must possess finger and hand dexterity for using small tools and equipment. Average annual earnings based off of a 50-hour week $65,000-$78,000 Flynn Group is an equal opportunity employer. We are committed to creating a diverse and inclusive workforce and providing reasonable accommodations/adjustments for individuals with disabilities. If you require any accommodation or adjustments throughout the application process, please let us know. We look forward to reviewing your application and potentially welcoming you to our premier team!

As a Dunkin' franchisee, we are committed to our employees as much as we are committed to our customers. We value hardworking and enthusiastic employees and we make it a priority to ensure their success. The Assistant Manager will be responsible for directing the overall operation of the restaurant, from hiring and overseeing a team of employees that deliver exceptional guest service to managing the financial performance of the store. This location is inside the Ontario Airport and it is required that you pass a background check/screening in order to work here as each employee will need a badge to enter into the Airport. As the day-to-day operator of the store, the Assistant Manager is expected to: • Drive sales and profitability through effective execution of the Company's business plan, • Create a positive working environment by fostering teamwork among Team Members through effective training, communication and relationship building, • Conduct himself/herself in a professional manner when dealing with customers, Team Members, and corporate management, • Act as a role model for other Team Members by adhering to all state and Federal labor and health laws and upholding the policies and standards of performance and conduct that is set by the Company and the Dunkin brand, • Work with integrity, honesty and accountability in all situations Benefits of working for a Dunkin' franchisee: • Competitive wages, • Awesome team-oriented environment, • Lots of potential for growth within the company for those who work hard Required qualifications: • Previous managerial experience preferred but not required, • Previous fast food/quick service restaurant experience required, • Top-notch customer service skills, • Strong verbal and written communication skills, • Excellent leadership skills, • Works well under pressure and is able to multi-task, • Financial literacy and analytical/problem solving skills, • Access to a vehicle and a valid Driver's License required, • Ability to lift 50 lbs, • Must submit to a background check

Job Description RedBuilt is hiring immediately for Production Associates at our Chino, CA facility. We offer a safety-first work environment, opportunities for growth, and great benefits! PLUS, earn an additional $2,000 during your first six months of employment! Wage Range: $19.75 to $27.00 hourly – We pay to reflect your prior applicable work experience! Industry Leading Benefits: 11 Paid Holidays, Paid Time Off, Health Benefits, 401k, PPE Reimbursement. See below for a FULL list of the benefits we offer! Positions Available: Driller, Gluer, Grader, Pinner, Punch Press Operator, Truss Assembler Shifts Available: • Monday through Friday (5:00am – 1:30pm) with overtime and occasional weekends. Don’t want to Apply Online? Stop by our office Monday through Friday between 7:00am and 1:30pm. We’re located at 5088 Edison Ave, Chino, CA and are excited to meet you! A Production Associate’s typical day may include… • Assembly of RedBuilt Open-Web Trusses., • Setup and operation of machinery, such as a punch press, pinner, gluer, and/or drill., • Setup and use of various tools such as circular saws, nail guns, and staple guns., • Assembly of various construction accessories for comprehensive framing packages., • Reading product design paperwork and plans., • Inputting information into computers to track material and work orders. What does RedBuilt do? Our Chino manufacturing facility builds engineered wood trusses, constructs wood wall panels, and assembles job packages for delivery direct to the construction site. What do we look for in a Production Associate? We are looking for full-time Production Associates with previous construction and/or production experience preferred but not required. Knowledge, Skills, and Abilities (Minimum Qualifications) • Must be safety and quality conscious and motivated to achieve excellence in both., • Team player with positive attitude, help achieve department production goals., • Read and understand shop details and job instructions., • Ability to read a basic tape measure., • Maintains excellent working relationships and has strong communication skills., • Must be able to work overtime when scheduled., • Must be 18 years of age., • High School Diploma or GED (not required, but a plus!), • Ability to work independently with minimal supervision., • Must be on time and ready to work., • Bilingual in English/Spanish (not required, but a plus!) Physical Demands/Work Environment • Ability to occasionally lift and/or move up to 50 pounds., • Ability to frequently walk and/or stand for prolonged periods of time., • Ability to occasionally bend, squat and/or stoop., • Manual and finger dexterity as required to perform daily job duties., • Frequently works near or around moving mechanical parts., • Exposed to a high level of noise in the work environment., • Exposed to airborne particles., • Work environment: Wood processing, manufacturing operation., • Occasionally exposed to outside weather conditions, including variations in temperature and precipitation., • Work in non-climate controlled environments Comprehensive Benefits Package: • 11 Paid Holidays, • Paid Time Off, • Paid Community Service, • Health Benefits (Medical, Dental, Vision), • FSA/HSA Options, • Discounted Pet Insurance, • 401k Retirement Plan with Employer Matching, • Discretionary Profit Sharing, • Paid Parental Leave, • Flexible Dependent Care Account, • Employee Assistance Program (EAP), • Company Paid Basic Life and AD&D Insurance, • Company Paid Short Term Disability, • Voluntary Long-Term Disability, • Voluntary Life and AD&D Insurance, • $2,000 Signing Bonus, • PPE Support: We provide our associates with all basic PPE required for the job. We also have a PPE reimbursement policy to support our associates with the cost of prescription safety glasses, custom molded hearing protection, and safety boots. FLSA Classification: Non-Exempt Job Type: Full-time Work Location: Chino, CA RedBuilt is an equal opportunity employer. Must take pre-employment drug test and a background check which includes criminal records to be considered for the position. Please note that the job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required for the Production Associate role. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. #RBPB

Job Description N O W H I R I N G Elias & Co. Staffing is interviewing now for the following positions: Fontana Position: Anneal Furnace Operator - Feeds raw material from a bulk wire carrier into an oven to heat the wire. The machine then pulls and stretches the heated wire to the desired and reduced diameter. Job Location: Fontana 2nd Shift: 2:00pm 10:30pm M-F +OT & Weekends if needed Training: Training will be done on the 1st shift 6:00am – 2:30pm or 7:30am – 4:00pm Pay Rate: while training on the 1st shift $18/hr once move to 2nd shift $19/hr Must have: • A Resume -English or Bilingual proficiency -Ability to lift up to 50 lbs -Basic Math Skills -3+ years of machine operating experience (within the last 5 years) -Comfortable performing minor maintenance and fast-paced product changeovers. Position: Dry Wire Draw Operator – Feeds raw material from a bulk wire carrier into the first die. The machine then pushes the wire through progressively smaller dies to reduce the diameter to the desired gauge. Job Location: Fontana 3rd Shift: 9:30pm – 6:00am M-F +OT & Weekends as needed Pay Rate: $20.66/hr Must have: • A resume -English or Bilingual proficiency -Ability to lift up to 50 lbs -Basic Math Skills -3+ years of machine operating experience (within the last 5 years), ideally in paper, packaging, or continuous-web manufacturing. -Comfortable performing minor maintenance and fast-paced product changeovers. Rancho Cucamonga Position: Machine operator -Operating a VFFS machine & packing nicotine pouches Job Location: Rancho Cucamonga Schedule: 1st shift - 5:00am-1:30pm 2nd Shift - 1:15 PM to 9:45 PM Monday-Friday + Overtime & weekends as needed Pay Rate:$20/hr-$21.00/hr depending on shift. Important: Because this role involves nicotine products, you MUST be at least 21 years old Requirements: 21+ years old Able to pass E-Verify Able to pass a background check English or Bilingual Recent machine operator experience REQUIRED Position: Quality Control -Visual inspection packing nicotine pouches and other assigned tasks Job Location: Rancho Cucamonga Schedule: 1st shift - 5:00am-1:30pm 2nd Shift - 1:15 PM to 9:45 PM Monday-Friday + Overtime & weekends as needed Pay Rate:$18/hr-$19/hr depending on shift. Important: Because this role involves nicotine products, you MUST be at least 21 years old Requirements: 21+ years old Able to pass E-Verify Able to pass a background check English or Bilingual Recent QC experience REQUIRED Ontario Position: Hooper Operator- Responsible for completing all facets of orders in accordance with quality, safety, and customer specifications. As well as for logging lot numbers of ingredients being used and pouring ingredients into hopper. Job Location: Ontario Schedule: 7:30am-4:00pm Mon-Fri Pay: $18/hr Must have: • -English or Bilingual proficiency, • -Ability to lift up to 50 lbs, • -Basic Math Skills, • -Previous material handler experience Position: Packer-The company packages dietary supplements like protein, collagen, coffee, matcha, and Oatmeal. Job Location: Ontario The schedule is Mon-Fri 7:30am-4pm Pay: $16.90/hr The position requires: • Ability to lift up to 25 lbs, • Previous packing experience, • E-Verify & background check. For more info text Michelle at 909-2187272 \nCompany Description We're the highest rated staffing company in California and have vast experience specializing in warehouse, manufacturing, assembly, and food industry labor. Our Values: -\tSelf-Actualization Self-Actualization is the fulfillment or realization of one’s own potential. We strongly believe that businesses exist to maximize people, not just profits. -\tFeedback & Courage Giving and receiving feedback effectively requires both courage and vulnerability. Feedback is a powerful tool that we use to see ourselves and grow. -\tTransparency & Trust Transparency builds trust. Trust is the belief and confidence in the integrity, reliability and fairness of a person or organization. Trust is the foundation of relationships and it is essential to high-performing teams. -\tExcellence & Humility Our business strategy is based on providing excellent service and we must have the humility necessary to recognize when we must improve. We're the highest rated staffing company in California and have vast experience specializing in warehouse, manufacturing, assembly, and food industry labor. \r\nOur Values: \r\n•\tSelf-Actualization\r\nSelf-Actualization is the fulfillment or realization of one’s own potential. We strongly believe that businesses exist to maximize people, not just profits. \r\n•\tFeedback & Courage\r\nGiving and receiving feedback effectively requires both courage and vulnerability. Feedback is a powerful tool that we use to see ourselves and grow. \r\n•\tTransparency & Trust\r\nTransparency builds trust. Trust is the belief and confidence in the integrity, reliability and fairness of a person or organization. Trust is the foundation of relationships and it is essential to high-performing teams. \r\n•\tExcellence & Humility \r\nOur business strategy is based on providing excellent service and we must have the humility necessary to recognize when we must improve.

Job DescriptionCoating Machine Operator – 2nd Shift Location: Irvine, CA Pay: $18.75/hour Schedule: Monday–Friday, 1:30 PM–10:00 PM Overtime: Saturdays available About the Role Want to build a career in specialized optical manufacturing? We are looking for a hands-on Coating Technician to join our 2nd shift team in Irvine. No prior coating experience required! We are willing to train the right candidate. If you are mechanically inclined, comfortable working with tools and equipment, and interested in learning technical manufacturing processes, we want to hear from you. What You’ll Do Learn to operate and assist with dip coating and AR (Anti-Reflective) coating processes for optical lenses. Clean, maintain, and dismantle chamber tooling to help keep equipment operating properly. Measure coating solutions and accurately record production data in company software. Unload parts from coating chambers and prepare them for Quality Control (QC). Inspect lenses and components for quality and defects. Follow safety, quality, and production procedures. Keep work areas and equipment clean and organized. What We’re Looking For Mechanically inclined with a willingness to learn technical processes. Comfortable using basic hand tools and working with machinery. Strong attention to detail and ability to follow instructions. Reliable attendance and punctuality. Able to stand and/or walk for extended periods. Able to lift and handle up to 50 lbs. Comfortable working a 2nd shift schedule. High school diploma or equivalent preferred. Why Apply? No previous coating experience required – training provided. Monday–Friday schedule. Opportunity to learn specialized optical manufacturing skills. Overtime opportunities available on Saturdays. If you're dependable, hands-on, and ready to learn a new technical skill, apply today! PandoLogic. Keywords: Coating Machine Operator, Location: Chino Hills, CA - 91709 , PL: 604441624