Maintenance supervisor jobs in Columbia, South CarolinaCrear alertas

Job Description Summary MUSC Community Physicians (MCP) is an entity within the Medical University of South Carolina that provides healthcare to patients within the rural health network throughout the state of South Carolina. Perform routine diagnostic radiographs and are responsible for performing minor interventional procedures under the supervision of a radiologist and/or licensed fluoroscopic supervisor while Radiologic Technologists independently perform the most complex technical and/or invasive procedures. Entity MUSC Community Physicians (MCP) Worker Type Employee Worker Sub-Type Regular Cost Center CC001862 MCP - Columbia Medical Assoc Pay Rate Type Hourly Pay Grade Health-27 Scheduled Weekly Hours 40 Work Shift Job Description Perform routine diagnostic radiographs and are responsible for performing minor interventional procedures under the supervision of a radiologist and/or licensed fluoroscopic supervisor while Radiologic Technologists independently perform the most complex technical and/or invasive procedures. Duties include: -Ability to utilize portable x-ray equipment •Performs radiographic examinations. •Checks equipment, supplies and accessories on a regular basis. •Maintains x-ray and other equipment in efficient operating order; performs preventive maintenance on a regularly scheduled basis; contacts outside service for major malfunctions. •Maintains orderliness and cleanliness of work area, requests and orders supplies as necessary to keep materials on hand at all times. •Performs other miscellaneous and related duties as required including lifting and transporting patients Minimum Education and Experience: -High school diploma or equivalent. Completion of an accredited radiology program, usually a two-year associate degree in radiology. •Required Licensure, Certifications, Registrations: •Radiographer certification (ARRT) such as the one offered by the American Registry of Radiologic Technologists Additional Job Description Benefits: ·Health, dental, vision, and life insurance·Employer Sponsored Retirement Plan·Paid time off and extended sick leave·Paid Parental Leave·Disability insurance plan options·Continuous professional and clinical training·Competitive pay ·Annual Merit Increase·Wellbeing resources·Tuition Reimbursement ·Employee perks and discounts·Employee referral program·Flexible schedule options·Certification incentive program Physical Requirements -Ability to perform job functions while standing and sitting. Ability to perform job functions while walking and climb stairs. Ability to work from elevated areas. Ability to work in confined/cramped spaces. Ability to perform job functions from kneeling positions. Ability to bend and twist at the waist. Ability to squat and perform job functions. Ability to perform gross motor activities with fingers and hands. Ability to perform firm grasping with fingers and hands. Ability to reach overhead. Ability to perform repetitive motions with hands/wrists/elbows and shoulders. Ability to use lower extremities for balance and coordination. Ability to reach in all directions. Ability to lift and carry 50 lbs. unassisted. Ability to lift/lower objects 50 lbs. from/to floor from/to 36 inches unassisted. Ability to lift from 36" to overhead 25 lbs. Ability to exert up to 50 lbs. of force. Examples include: To transfer a 100 lb. patient that cannot assist in the transfer requires 50 lbs. of force. For every 100 additional pounds, assistance will be required from another healthcare worker. 20 lbs. of force are needed to push a 400 lb. patient in a wheelchair on carpet. 25 lbs. of force are required to push a stretcher with a patient with one hand. Ability to maintain 20/40 vision, corrected, in one eye or with both eyes. Ability to see and recognize objects close at hand or at a distance. Ability to match or discriminate between colors. Ability to determine distance/relationship between objects; depth perception. Ability to maintain hearing acuity, with correction. Ability to perform gross motor functions with frequent fine motor movements. Ability to deal effectively with stressful situations. Ability to work rotating shifts. Ability to work overtime as required. Ability to work in a latex safe environment. Ability to maintain tactile sensory functions. * *Ability to maintain good olfactory sensory function. * *Ability to be qualified physically for respirator use, initially and as required. If you like working with energetic enthusiastic individuals, you will enjoy your career with us! The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: ___

Overview: CoolSys solves the most complex challenges in refrigeration, air conditioning, heating, engineering, and energy management. With over 3,700 associates nationwide, we deliver tailored solutions to help businesses cut costs, improve equipment performance, and reduce emissions. Our services include HVAC and refrigeration equipment sourcing, installation, repair, maintenance, monitoring, and optimization. We also offer engineering design, energy resilience and consumption optimization, asset recycling, and seamless multi-site rollouts across states. Based in Southern California since 2007, CoolSys serves over 45,000 customer locations in industries like retail, food service, commercial, data centers, industrial, and pharmaceuticals. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! We understand that hiring great people is the foundation of everything we do. Our employee benefits packages include: • Competitive pay $35/HR - $50/HR, • Benefits: Medical, Dental, Vision and Prescription coverage., • Paid vacation, holidays, and floating holiday., • 401(K) with Company match., • Company sponsored life insurance, as well as optional AD&D, short and long-term disability., • Tuition reimbursement., • Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more., • Pet Insurance. ESSENTIAL DUTIES AND RESPONSIBILITIES · Participates in managing the Installation P/L for a specific geography. · Oversees and ensures project level profitability. · Coordinates and plans Installation projects: o Oversees procurement of materials, permits, supplies; o Orchestrates schedule; o Forecasts manpower requirements. · Reports on job status/performance. · Ensures customer expectations are met. · Effectively resolves issues and problems. · Develops and maintains productive relationships with customers, GCs and subcontractors. · Interviews, selects, hires and oversees onboarding of Foremen and Installation crews. · Manages performance and provides training, coaching and performance feedback to Apprentices, Journeyman and Foreman. · Uses metrics to drive accountability and performance. · Ensures compliance of Installation policies and procedures, including project tracking, safety, time and attendance, etc. · Ensures use of PPE and the application of safe behavior, including driving, by all employees. · May oversee 3rd party resources. · Performs other duties as assigned. Qualifications: Education / Training · High school diploma, GED, or completion of trade program or technical school. · College degree, a plus. Work Experience / Skills · 5 + years of experience in commercial construction, or a related industry. · Knowledge of construction principles and practices, including labor hour estimation, forecasting, and multiple disciplines involved in area of responsibility. · 2+ years of experience as a Foreman or other supervisory position. · Experience in hiring and managing subcontractors preferred. · Strong leadership skills, with demonstrated experience managing a diverse and multi-discipline workforce. · Proficient in coaching, training, developing and building a team. · Proficient in managing time, delegating assignments and following through to ensure good results. · Proficiency in understanding and managing P&L. · Proficient in managing multiple assignments, setting and balancing competing priorities with strong organizational skills and ability to multitask. · Ability to solve problems and apply good judgement. · Excellent verbal/nonverbal and written communication and presentation skills. · Strong customer service skills, including an ability to proactively address customer issues and concerns and ability to forge strong working relationships with customers. · Knowledge of jobsite safety, ability to oversee work activities to ensure safe work practices and safety rule compliance. · Good driving record. · Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. · Ability to use typical business tools including E-Mail, Word, Excel, Work Order/Dispatch Software, Enterprise Resource Planning (ERP) software, etc. PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment This job operates in a clean, well-lit and climate-controlled professional office environment with minimal physical hazards and noise. This role routinely uses standard office equipment such as computers, phones, printers, etc. Physical Demands While performing the duties of this job, the employee is regularly required to stand, sit, walk, talk, hear, drive, and use hands and fingers. The employee is occasionally required to reach, stoop and kneel. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on ___ and ___. Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Journeyman-HVAC, Journeyman-EMS, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, Electrical, start-up, startup

About this Position: Job Title: GIS Analyst Responsibilities: • Produce digital/hard copy maps in advanced GIS/Mapping applications., • Perform GIS data collection, maintenance and analysis., • Update database tables to reflect changes to the GIS features used in GIS analysis and in mapping as assigned by the supervisor., • Perform quality control on the new and existing data to maintain correctness and spatial accuracy standards., • Assist in the development and maintenance of procedure manuals., • Completes software/procedures research/testing as assigned by the manager., • Performs related tasks as assigned by the manager. Required Skills: • Knowledge and experience working with GIS/Mapping software and applications, Experience working with a spatial database, Microsoft Office, experience with cartography, experience with database design. Preferred Skills: • Knowledge and experience with ArcGIS Pro, experience with a SQL database, Experience with ArcGIS roads and highways extension. Required Education: • Bachelor’s degree, Preferred field of study includes Geography, Computer Science, GIS, or Physical Science. "No phone calls please."

PURPOSE AND SCOPE: The registered professional nurse Home Therapies RN CAP 1 is an entry level designation into the Clinical Advancement Program (CAP). This position is accountable and responsible for the provision and coordination of clinically competent care including assessment, planning, intervention and evaluation for an assigned group of patients. Assesses and manages patients’ response to home dialysis training and treatment therapy by following prescribed predetermined protocols and communicates patient related issues to the physician as needed. As a member of the End Stage Kidney Disease (ESKD) health care team, this position participates in decision-making, teaching, leadership functions, and quality improvement activities that enhance patient care outcomes and facility operations. PRINCIPAL DUTIES AND RESPONSIBILITIES: All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care policy, procedures, standards of nursing practice, state and federal regulations. · Performs all essential functions under the direction of the Supervisor with guidance from the Educator, Preceptor or in collaboration with another Registered Nurse. · Performs ongoing, systematic collection and analysis of dialysis data for assigned patients and documents in the patient medical record, makes adjustments or modifications to treatment plan as indicated and notifies Supervisor or physician as needed. · Assesses, collaborates and documents patient/family’s basic learning needs to provide initial and ongoing education to patients and family. · Directs and provides, in collaboration with the patient, home care partner, direct and ancillary patient care staff, all aspects of the provision of safe and effective delivery of dialysis therapy to assigned patients. · Administers medications as prescribed or in accordance with approved algorithm(s), and documents appropriate medical justification and effectiveness. · Initiates or assists with emergency response measures. · Serves as a resource for health care team, participates in staff training and orientation of new staff as assigned. · Ensures correct laboratory collection, processing and shipping procedures are performed and reschedules missed or insufficient laboratory collections. · Identifies expected outcomes, documents and updates the nursing assessment and plan of care for assigned patients through collaboration with the Interdisciplinary Team. · Ensures patient awareness related to transplant and treatment modality options. · Assists in the identification, evaluation, selection and education of Home Dialysis candidates and Home Partners. · Performs assessment and identifies barriers of the Home Dialysis candidate’s home environment and partner / family readiness and ability to perform dialysis treatments in the home. · Trains Home Dialysis patients and / or Home Partners on the safe, effective operation and maintenance of all Home Dialysis equipment and treatment supplies through an organized and formal Home Dialysis Training Program. · Required to complete CAP requirements to advance. · Performs all other duties as assigned by Supervisor. PHYSICAL DEMANDS AND WORKING CONDITIONS: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · The position provides direct patient care that regularly involves heavy lifting, moving of equipment, patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. · This position requires frequent, prolonged periods of standing and the employee must be able to bend over. · The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet. · The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. · May be exposed to infectious and contagious diseases/materials. · Rotates coverage with other licensed home therapies staff as assigned to ensure reliable and adequate coverage. · Position requires participation in on-call rotation, night, weekend, holiday or as defined by individual program needs. · The position may require travel to training sites, other facilities or patient homes. · May be asked to provide essential functions of this position in other locations including patient’s home with the same physical demands and working conditions as described above. · Day to day work includes desk work, computer work, interaction with patients, facility/hospital staff and physicians. SUPERVISION: Assigned oversight of LPNs/LVNs, RNs, Patient Care Technicians and Home Therapy Care Team Assistants as a Team Leader or designated Nurse in charge, after meeting all the following: · Successful completion of all FKC education and training requirements for new employees. · Must have a minimum of 12 months experience as a RN. · Successful completion of 3 months experience as a RN in home peritoneal dialysis and / or hemodialysis. EDUCATION and LICENSURE: · Graduate of an accredited School of Nursing. · Current appropriate state licensure. · Current or successful completion of CPR BLS Certification · Must meet the practice requirements in the state in which he or she is employed. EXPERIENCE AND REQUIRED SKILLS: · Entry level for RNs with less than 2 years of Nephrology Nursing experience as a Registered Nurse. · Minimum of 1-year experience as a Registered Nurse (preferred) · Home dialysis therapy experience (preferred). ACKNOWLEDGEMENT: I acknowledge that I have read and accepted this job description. I understand what is expected of me in this position, and I am able to perform the essential functions as outlined with or without reasonable accommodation. Furthermore, I understand that the duties and responsibilities listed in this job description are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. If I have any questions about duties and responsibilities not specified in this job description that I am asked to perform, I should discuss them with my immediate Supervisor or my Human Resources representative. Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

Job Position: Maintenance Location: West Columbia, SC 29169 Pay Rate: $23 - $25/hr Shift: Description: Advance Your Career as an Apartment Maintenance Technician! InterSolutions is looking for dependable and skilled maintenance professionals to join our team! If you have versatile handyman skills and want to gain valuable experience in the property management industry, this is the perfect opportunity for you. Why Join InterSolutions? • Fast and easy hiring process apply, interview, and get hired online!, • Opportunities for permanent placement with top property management companies Primary Responsibilities Include: Complete service tickets and work orders efficiently and accurately Prepare vacant apartments for new residents by managing the turnover process Keep grounds and common areas clean and free of debris Deliver exceptional customer service to residents Perform electrical, plumbing, appliance, and carpentry repairs, including: • Repairing electrical circuits, switches, and breakers, • Servicing and installing light fixtures and appliances (stoves, refrigerators, washers, dryers), • Fixing and replacing toilets, sinks, vanities, disposals, and caulking, • Handling minor carpentry repairs, including doors, window screens, and blinds, • Painting and drywall repair as needed, • Removing bulk trash, including discarded appliances Requirements: Basic knowledge of maintenance repair and service across multiple areas Previous apartment maintenance experience preferred HVAC Certification is a plus Capable of lifting up to 40 pounds and safely using ladders Strong verbal and written communication skills Ability to work weekends as required null

Job Position: Maintenance Location: Columbia, SC 29209 Pay Rate: $18 - $21/hr Shift: Description: Jumpstart Your Career with InterSolutions Now Hiring Apartment Maintenance Technicians! Put your maintenance skills to work! InterSolutions is hiring Apartment Maintenance Technicians and looking for motivated, quick learners with a positive attitude to join our team. Why Join InterSolutions? • Fast and simple hiring process apply online today!, • Opportunities for permanent placement, • Referral bonuses for bringing in new talent Primary Responsibilities Include: Complete service tickets and work orders efficiently and accurately Prepare vacant apartments for new residents by managing the turnover process Keep grounds and common areas clean and free of debris Deliver exceptional customer service to residents Perform electrical, plumbing, appliance, and carpentry repairs, including: • Repairing electrical circuits, switches, and breakers, • Servicing and installing light fixtures and appliances (stoves, refrigerators, washers, dryers), • Fixing and replacing toilets, sinks, vanities, disposals, and caulking, • Handling minor carpentry repairs, including doors, window screens, and blinds, • Painting and drywall repair as needed, • Removing bulk trash, including discarded appliances Requirements: Basic knowledge of maintenance repair and service across multiple areas Previous apartment maintenance experience preferred HVAC Certification is a plus Capable of lifting up to 40 pounds and safely using ladders Strong verbal and written communication skills Ability to work weekends as required null

107 Saxe Gotha Dr. West Columbia, SC 29172 What’s the Job? Ready to accelerate your career while helping our customers move forward? As a Fleet Maintenance Fueler Washer at Penske, you’ll do exactly that. You will make sure vehicles are fueled, clean and safe before they hit the road again. You will be the face of Penske—the person greeting our customers when they arrive and the one sending them off with a smile. Why join Penske as a Fleet Maintenance Fueler Washer, you ask? It’s simple. Maybe you’ve always had an interest in vehicle maintenance but haven’t had the chance to pursue it. This is the perfect place to start. No experience is required. We will introduce you to our vehicle maintenance processes. We will teach you how to use our leading-edge technology. In fact, the training and experience you get here will help you advance to become a technician. And you’ll get to do that learning at a company that offers career stability and competitive benefits. Talk about an amazing opportunity. It’s about going above and beyond for our customers—the way Penske goes above and beyond for you. It’s about building meaningful relationships. It’s about keeping our customers moving forward. Main Responsibilities: • Greeting our customers and making sure they have a great experience as you fuel and wash vehicles, • Performing vehicle readiness inspections to make sure tires, fluids, and other basic maintenance items are done, • Helping make sure our facilities are clean, safe environments for our customers and associates, • Building your skills through training and hands-on coaching to perform minor repairs such as installing mounted tires, replacing or rotating tires and performing preventive maintenance repairs, • Completing other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary, • Shift Premiums 2nd Shift ($2), 3rd Shift ($3), Weekends ($2), • Career stability, • Opportunity for growth, • Excellent benefits, including lots of time off, • Strong, well-rounded training programs, • Advanced vehicle maintenance technology, • Location and schedule flexibility General Requirements: • High school diploma, equivalent, or prior work experience preferred, • Valid driver’s license required, • Excellent customer service and communication skills, • The ability to work well as part of a team, • The ability and willingness to work outside, • Basic mechanical ability and tool usage (preferred), • Basic computer skills, • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management, • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice., • Regular, predictable, full attendance is an essential function of the job, • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review., • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required. This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period., • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls., • The associate must be able to work safely at heights using applicable ladders and elevated working platforms., • The associate must be able to safely work in all weather conditions., • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment., • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. This position also requires the ability to push/pull truck tires on a regular basis that exceed 100 pounds. Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Family: Vehicle Maintenance Address: 107 Saxe Gotha Dr Primary Location: US-SC-West Columbia Employer: Penske Truck Leasing Co., L.P. Req ID: 2512605

Job Description Summary MUSC Community Physicians (MCP) is an entity within the Medical University of South Carolina that provides healthcare to patients within the rural health network throughout the state of South Carolina. Perform routine diagnostic radiographs and are responsible for performing minor interventional procedures under the supervision of a radiologist and/or licensed fluoroscopic supervisor while Radiologic Technologists independently perform the most complex technical and/or invasive procedures. Entity MUSC Community Physicians (MCP) Worker Type Employee Worker Sub-Type Regular Cost Center CC001862 MCP - Columbia Medical Assoc Pay Rate Type Hourly Pay Grade Health-27 Scheduled Weekly Hours 40 Work Shift Job Description Perform routine diagnostic radiographs and are responsible for performing minor interventional procedures under the supervision of a radiologist and/or licensed fluoroscopic supervisor while Radiologic Technologists independently perform the most complex technical and/or invasive procedures. Duties include: Ability to utilize portable x-ray equipment Performs radiographic examinations. Checks equipment, supplies and accessories on a regular basis. Maintains x-ray and other equipment in efficient operating order; performs preventive maintenance on a regularly scheduled basis; contacts outside service for major malfunctions. Maintains orderliness and cleanliness of work area, requests and orders supplies as necessary to keep materials on hand at all times. Performs other miscellaneous and related duties as required including lifting and transporting patients Minimum Education and Experience: High school diploma or equivalent.Completion of an accredited radiology program, usually a two-year associate degree in radiology. Required Licensure, Certifications, Registrations: Radiographer certification (ARRT) such as the one offered by the American Registry of Radiologic Technologists Additional Job Description Benefits: Health, dental, vision, and life insuranceEmployer Sponsored Retirement PlanPaid time off and extended sick leavePaid Parental LeaveDisability insurance plan optionsContinuous professional and clinical trainingCompetitive pay Annual Merit IncreaseWellbeing resourcesTuition Reimbursement Employee perks and discountsEmployee referral programFlexible schedule optionsCertification incentive program Physical Requirements Ability to perform job functions while standing and sitting. Ability to perform job functions while walking and climb stairs. Ability to work from elevated areas. Ability to work in confined/cramped spaces. Ability to perform job functions from kneeling positions. Ability to bend and twist at the waist. Ability to squat and perform job functions. Ability to perform gross motor activities with fingers and hands. Ability to perform firm grasping with fingers and hands. Ability to reach overhead. Ability to perform repetitive motions with hands/wrists/elbows and shoulders. Ability to use lower extremities for balance and coordination. Ability to reach in all directions. Ability to lift and carry 50 lbs. unassisted. Ability to lift/lower objects 50 lbs. from/to floor from/to 36 inches unassisted. Ability to lift from 36 to overhead 25 lbs. Ability to exert up to 50 lbs. of force. Examples include: To transfer a 100 lb. patient that cannot assist in the transfer requires 50 lbs. of force. For every 100 additional pounds, assistance will be required from another healthcare worker. 20 lbs. of force are needed to push a 400 lb. patient in a wheelchair on carpet. 25 lbs. of force are required to push a stretcher with a patient with one hand. Ability to maintain 20/40 vision, corrected, in one eye or with both eyes. Ability to see and recognize objects close at hand or at a distance. Ability to match or discriminate between colors. Ability to determine distance/relationship between objects; depth perception. Ability to maintain hearing acuity, with correction. Ability to perform gross motor functions with frequent fine motor movements. Ability to deal effectively with stressful situations. Ability to work rotating shifts. Ability to work overtime as required. Ability to work in a latex safe environment. Ability to maintain tactile sensory functions. * *Ability to maintain good olfactory sensory function. * *Ability to be qualified physically for respirator use, initially and as required. If you like working with energetic enthusiastic individuals, you will enjoy your career with us! The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: ___

Job Description Summary of Primary Functions: Dobbs Equipment is seeking an experienced Shop Service Technician. Technicians are responsible for the repair, diagnosis, overhaul, and reconditioning maintenance of customer and company heavy equipment and components. Depending on the location and assignment, the technician will be responsible for some, or all the functions and duties listed below. These repairs may require working hours in addition to the normal work schedule for emergency calls or routine service as required. This job description does not include a complete listing of all the duties and functions of the position. Management reserves the right to assign other duties or projects as necessary. Essential Functions and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. (Other duties may be assigned) • Follow all safety rules and regulations in performing work assignments while maintaining a safe work environment and safe work habits., • Recondition, repair, service, and assemble any machines/industrial equipment., • Diagnose problems and determine what repairs are needed., • Perform any inspections as required., • Check and report any shortages and malfunctions to the Service Manager., • Maintain records and account for all time, parts, and supplies used in repairing and servicing both customer and dealership equipment., • Handle customer problems both objectively and tactfully., • Assist in directing work of helpers or on the job trainees and provide instructions as required., • Complete dis-assembly and inspection, as efficiently as possible, so parts may be ordered, and machine work can be scheduled promptly., • Perform all service tasks as assigned by the Service Manager, Supervisor, or Shop Foreman., • Prepare all reports and forms required in conjunction with job assignments., • Report to Service Manager any additional work required to ensure proper operation and safety of equipment., • Participate in service training programs required for development of skills and knowledge., • Maintain a clean work area and perform work in a neat and orderly fashion., • Bring to the attention of the Service Manager any shop tools, equipment or vehicle that is not in a serviceable condition or is unsafe to use., • Represent the dealership as a professional Service Technician at all times., • Operate trucks and equipment with extreme care and caution., • Maintain and care for shop tools, equipment, vehicles, and other employee’s belongings., • Reports to work on time, as scheduled., • Ability to work up to 12-hour days, varying shifts, weekends, and holidays as needed., • Ability to operate company vehicles and follow all motor vehicle state safety laws (if necessary)., • All employees are expected to adhere to the safety policies of Dobbs Equipment and the clients for whom we work., • Following the safety policies of Dobbs is a condition of employment and is everyone’s responsibility. Qualification: The requirements listed below represent the knowledge, skill, and/or ability required. • Valid Driver’s License and maintain a clean driving record., • Knowledge of industrial equipment maintenance and operation., • Ability to perform basic repairs and required maintenance using special tools and equipment following Technical Manual procedures, • Ability to operate heavy equipment safely around shop. Education, Skill, and/or Experience Requirements: • Associate degree or equivalent from two-year college or technical school or a minimum of 2 years related experience and/or equivalent combination (preferred)., • Stay current with technical changes., • Proficient knowledge of mechanical, electrical, and hydraulic systems., • Maintains current product knowledge of John Deere and competitive products., • Forklift Certification (preferred)., • Ability to communicate effectively with teammates., • Strong problem-solving skills., • Excellent time management skills., • Must be able to self-manage/self-motivate., • Flexible schedule (sometimes weekends or overtime)., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write diagnosis and work completed on routine reports and correspondence., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Develop skills in disassembly, assembly and repair of components and machines., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Quick learner with the ability to think out of the box., • Overnight travel less than 5% (Training)., • Bilingual a plus. Work Environment: While performing the functions of this job, the employee regularly works in a service shop setting and is exposed to frequently changing temperatures, wet or humid conditions, noise, vibration, fumes, odors, dust, and close proximity to moving mechanical parts. Physical Demands: The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is continuously required to: • Ability to work using Personal Protective Equipment, including respirators, welding shields, hard hats, vests, safety glasses, goggles, gloves and etc., • Ability to use full range of motion for back, arms, hands, and fingers., • Able to use full range of motion for both legs, including climbing, twisting, squatting, and pushing with both legs., • Able to use hand tools, fuel hoses, lubrication systems on all equipment, • Able to climb onto or down from mobile construction equipment, typically 3-4 feet of climbing, for service and inspection., • The employee is frequently required to lift or carry loads greater than 50 lbs but less than 75 lbs., • Specific vision abilities required by this job include close, distance and color vision., • The employee is regularly required to talk or hear at moderate noise levels. We’re an Equal Employment Opportunity and Affirmative Action Employer Dobbs Equipment is an Equal Employment Opportunity (EEO) and Affirmative Action employer. We are committed to providing an environment free of discrimination, harassment and retaliation both for our employees and applicants. We make all employment related decisions on the basis of an individual’s qualifications and job performance. We recruit, hire, promote, train, transfer, and make compensation decisions without regard to race, religion, color, creed, national origin, ancestry or citizenship status, sex, sexual orientation, gender, genetic information, marital status, pregnancy status, age, disability, protected veteran status, or any other characteristic protected by federal, state or local law. Notice to Applicants: We participate in E-Verify in the United States. Drug Free and Alcohol-Free Workplace Notice. Dobbs Equipment is an Equal Opportunity and At-Will Employer.

Job Description Overview A Diesel Technician specializes in diagnosing, repairing, and maintaining diesel-powered vehicles and equipment. This role is essential in industries like trucking, construction, and agriculture, where diesel engines are commonly used. Why Join? We believe our people are our greatest asset. We're committed to your success, development, and career longevity. As a proud International® truck dealership and a leader in commercial truck solutions, we offer you the tools, training, and environment you need to thrive. What You'll Do: * Perform work as outlined on a repair order with efficiency and accuracy, in accordance with dealership and factory standards * Diagnose and repair diesel trucks and commercial vehicles * Perform preventive maintenance and safety inspections * Complete repairs efficiently in a flat rate pay environment * Use state-of-the-art diagnostic tools and OEM software * Work on a wide range of makes and models, specializing in International® Trucks * Observe and record any malfunction and performs repair, as directed by a supervisor. * Complete and assist other technicians on major repairs. * Communicate with parts department to obtain needed parts. * Document all work performed and recommended on the repair order. * Road test vehicles when required. CDL License required for this task. * Maintain a safe and clean work environment. * Display the ability to work in a team environment. What You Bring: * 2+ years of diesel mechanic experience (preferred) * Familiarity with medium to heavy-duty trucks and diesel systems * Strong diagnostic and problem-solving skills * Valid driver’s license (CDL a plus) * Positive attitude and team-oriented mindset What We Offer: * Ongoing OEM & In-House Training – Stay current and grow your expertise * Access to the latest tools and diagnostic technology * Opportunities for advancement and ASE certification support * Comprehensive benefits package: * Health, Dental & Vision Insurance * Company provided basic life insurance * Optional supplemental plans * 401(k) with company match * Paid Time Off & Holidays * Uniforms and Boot allowance * Annual work boot assistance Qualifications: * Must be able to pass a pre-employment drug screening and physical examination. * Must be able to work in a fast-paced environment while providing a superior customer service experience. * Must have a minimum of two year of technical experience in the medium-/heavy-duty truck industry. * Must be physically capable of performing the duties of technician per dealer requirements. * Ability to produce quality work in a Flat Rate structure environment. * Cummins Certified Technician highly preferred. (x15, isb series 6.7, and L9) About Carolina International Trucks Founded in 1992, Carolina International Trucks is the largest commercial truck dealer in South Carolina. We sell, service and support medium, heavy and severe service International Trucks, IC Buses, Hino Trucks, and Mitsubishi Fuso medium duty commercial work trucks. We move our customers forward with innovative products backed by quality service. The dealership has more than 270 employees, a state-of-the-art paint booth and body shop in Columbia, more than 130 service bays and over $7 million in stocked parts to support vehicle uptime. Carolina International Trucks Idealease provides trucks for lease and rental supported by mobile maintenance services. With locations in Columbia, Charleston, Conway, Florence, Greenville, and Greer, South Carolina International Trucks, we have a presence covering the entire state to help keep your business moving. We have prided ourselves on being one of the region’s premiere dealers for more than 30 years. A reputation built through the hard work of each employee at our company, and through customers that continually challenge us to find new transportation solutions. We look forward to providing the same great service to you. Carolina International Trucks is an equal opportunity employer and values diversity. We encourage all qualified candidates to apply. This is not necessarily a list of all the duties, responsibilities and requirements associated with this position. While the accountabilities noted herein are intended to be an accurate reflection of the current job, the dealership reserves the right to revise the functions and duties as circumstances dictate. We are an Equal Opportunity Employer.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Company car, • Employee discounts, • Free uniforms, • Health insurance, • Paid time off Position Summary The Facilities Technician is responsible for the service, repair, and preventative maintenance of exercise machines, spa amenities, and general facility assets across multiple locations. This may include, but is not limited to, basic plumbing, electrical, carpentry, flooring, and other maintenance tasks to ensure optimal functionality and a positive member experience. The role requires daily travel to several locations, physical labor, and interaction with club staff and vendors. Essential Duties & Responsibilities • Perform repairs and preventative maintenance on cardio and strength equipment., • Troubleshoot and repair spa equipment (e.g., tanning units, HydroMassage, red light recovery units, etc)., • Perform minor plumbing tasks (e.g., valve replacements, flange tightening, water fountain repairs)., • Conduct basic electrical work (e.g., replacing outlets, wire mold, ballasts, and light bulbs)., • Repair drywall, FRP, paint touch-ups, tile, and rubber flooring as needed., • Install and replace televisions, monitors, computer equipment, and address IT issues as needed., • Perform club walk-throughs to identify and address facility issues (e.g., gym floor, storage, exterior)., • Track, complete and update written communication on Work Orders; Maintain a service log using our maintenance management system (Woven)., • Track vehicle inventory and cleanliness; adhere to GPS monitoring requirements., • Maintain clear communication with club leadership and Facilities management., • Provide on-call support and assist during emergencies., • Escalate unresolved issues to Supervisor., • Maintain clear and concise communication with AGMs, GMs, RMs and Director of Operations, as needed., • Participate in new club builds, relocations, remodels, and equipment setups., • Participate in regular training and certification programs to stay current with industry standards and best practices. This may include required travel (air and hotel), sometimes outside normal work hours, and attendance at regional or national workshops, classes, or vendor-led sessions. Maintain and document completion of required credentials and refresher courses., • Maintain strong vendor relationships and coordinate with external service providers., • Embrace company values, service culture, and demonstrate professional, team-first behavior., • High School Diploma or GED required; trade school or technical training preferred., • Minimum 3 years of experience in maintenance, construction, or mechanical repair., • Mechanical/electrical service background highly desirable., • Prior experience in fitness or hospitality settings preferred., • Forklift certification a plus., • Must have a valid drivers license and clean driving record., • Ability to submit an annual Motor Vehicle Record (MVR) check., • Basic computer skills (Google Office Suite, Microsoft Word, Excel, Gmail)., • Strong organizational, problem-solving, and time-management abilities., • Effective verbal and written communication skills., • Positive attitude and adaptability in a fast-paced environment., • Maintain a neat appearance and be courteous and approachable when interacting with Team Members, guests, and vendors., • Willingness to work flexible hours including early mornings, evenings, weekends, and holidays., • Willingness and ability to travel for training and certification purposes, including air travel and overnight stays, when necessary. Commitment to ongoing professional development and maintaining up-to-date industry certifications. Physical Demands & Work Environment • Ability to lift, carry, push, or pull up to 80 lbs independently and up to 2,500 lbs with assistance., • Frequent standing, walking, bending, stooping, kneeling, reaching, twisting, and climbing ladders (up to 12)., • Regular exposure to cleaning chemicals, tools, sharp objects, and noisy environments., • Must be able to operate tools and machinery safely., • Occasional work outdoors in inclement weather., • Must have visual acuity and auditory ability for accurate communication and task execution., • Regular travel by vehicle, sometimes up to 4 hours one-way.

Job DescriptionDescription: POSITION SUMMARY: The Shop Technician provides timely completion of repairs and maintenance to various construction equipment and machinery within shop at Ascendum Branch locations, according to established procedures, while maintaining good working relationships with customers and co-workers. FLSA STATUS: The U.S. Fair Labor Standards Act (FLSA) requires employers to classify their employees as being either exempt or non-exempt for the purpose of being paid overtime wages. The essential duties of this job are such that the employee is classified according to the FLSA as a Non-Exempt employee. TRAVEL REQUIREMENTS: Up to 10% To perform the job successfully, the employee must be able to perform each essential duty of the job in a satisfactory manner, with or without reasonable accommodation. The essential duties of the job include the Responsibilities, Experience, Proficiencies, and Physical Demands described below. RESPONSIBILITIES: Satisfactorily performing and/or achieving the following Responsibilities are essential duties of the job. • Repair and service machinery for complete customer satisfaction., • Maintain, safely operate, and care for company-owned tools and equipment per company requirements., • Maintain up to date knowledge of all safety training, product training, and service department goals., • Complete assigned work with minimum re-work., • Order parts and materials through Ascendum Parts to complete work assignments., • Ensure all company safety requirements are followed at all times., • Complete all required paperwork and maintain records/photos/other materials as required, for example, time clocking or collection records, SOC reports., • Maintain shop and yard cleanliness., • Promptly report any unsafe conditions, including those related to tools, the facility, or employee actions., • Adhere to instruction/direction of supervisor., • Seek formal and informal performance assessments, including performance versus expectations., • Actively participate in required training, development programs, and electives as suits one’s needs., • Experience and/or Education: Technical school completion in appropriate field., • Computer Skills: The employee can use the equipment and software required to accomplish the responsibilities of this position. Knowledge of Microsoft products such as Word, Excel, and Outlook., • Possess ability to communicate with customers and co-workers in a positive and enthusiastic manner. Maintain an approachable and friendly demeanor., • Knowledge of safe job practices & regulations related to OSHA, MSHA and Ascendum Machinery requirements., • Possess aptitude for repairing, trouble shooting, and servicing equipment in changing environments., • Possess mechanical knowledge of tools and mechanical work for repairing equipment., • Possess above average knowledge of hydraulics, electronics, diesel engines., • Possess strong attention to detail., • Raise issues and concerns promptly., • Possess good verbal and written communication skills., • Document work in a clear and concise manner., • Proven ability to complete work with energy and enthusiasm., • Customer orientation toward service and building relationships., • Compatible to working branch hours and extended days as needed., • While performing this job, employee is regularly required to talk or hear., • The position requires the ability to sit, stand and walk for long periods., • The position requires the ability to kneel, stoop, bend, climb and crawl without restrictions., • The position requires the continuous use of wrists, hands and/or fingers., • The position requires the ability to lift up to 75 pounds., • The position requires the ability to work in varying outdoor/indoor environments with various terrain., • Employees are expected to meet the Physical Dmands of the job. If requested and deemed necessary, Ascendum Machinery will provide reasonable accommodation to a disabled employee to meet the Physical Demands of the job.

Job Description About Easlan Management Company: Easlan Management Company, based in Greenville, South Carolina, has been committed to delivering exceptional service in the multi-family housing industry since 1987. The company’s mission emphasizes delivering outstanding value and satisfaction to its clients, residents, and associates by building trust. Easlan Management Company focuses on exceptional customer service, value, attention to detail, and effective communication, creating a solid foundation and tradition that stands out in the industry. Easlan Management is seeking a highly motivated and enthusiastic individual to serve as a Maintenance Technician for Alera West Apartments in Columbia, SC. Position Summary The Maintenance Technician is responsible for general maintenance tasks, responding to service requests, executing repairs, troubleshooting, ensuring apartment turnovers, and performing preventative maintenance. This position reports directly to the Maintenance Supervisor. Essential Functions • Respond promptly to maintenance requests., • Perform repairs and maintenance on vacated apartments, including minor painting, repair walls, doors, woodwork, plumbing, pressure washing, gutter cleaning, landscape pruning, and electrical work., • After hours on call for emergencies is mandatory., • 2 years of previous maintenance experience in multi-family/residential properties or equivalent., • CPO certification is preferred but not required., • EPA 608 type 1 & 2 or Universal certification required., • Must pass the Maintenance Skills Competency Test., • Valid driver's license, insurance, and reliable transportation., • Comfortable with duties related to maintaining apartment units., • Ownership and provision of necessary tools for assigned duties., • Proficient use of hand tools and maintenance equipment., • Excellent verbal and written communication skills., • Positive attitude and professionalism, • Self-motivated with the ability to work independently, • Strong work ethic and attention to detail, • Exposure to indoor and outdoor environments with varying noise levels., • Regular use of hands and arms; standing and occasional walking., • Ability to move/drag/lift up to 50 lbs. regularly., • Specific vision abilities, including accurate color vision., • Paid Time Off and Paid Holidays, • 401(k), • Medical, • Dental, • Vision, • Life Insurance, • Short Term Disability Our company provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionProperty Management is presently accepting resumes for a full-time Maintenance Technician for one of our apartment communities in. This is an excellent opportunity to join a growing and dynamic company with a broad future and a promote-from-within company culture. We are seeking polished, engaging and professional maintenance technicians with skilled advanced trade experiences and a commitment to apply their very best in a fast moving environment that rewards your efforts. Through training, coaching and continued education we develop our maintenance technicians to become the best in the industry! In addition to a competitive hourly salary, we offer a generous commission structure, full medical and dental benefits, paid holidays, vacation time, continued training, advancement opportunities and much more! General Summary Under the immediate supervision of the Maintenance Supervisor, the Maintenance Technician is responsible for all aspects of maintenance and repairs at an apartment community. Essential Job Duties and Responsibilities • Make ready units for new move-ins, • Complete grounds work such as: grounds pick up, blowing of breezeways and light landscaping, • Coordinates with Maintenance Supervisor to complete projects and work orders efficiently, • Performs minor electrical maintenance including, but not limited to replacement or repair of fixtures (e.g. wall switches and outlets, incandescent and fluorescent bulbs and tubes, ballast, sockets, fuses, minor appliances, cords, etc.) using appropriate hand, power and specialty tools., • Performs minor plumbing maintenance (e.g. replacement or repair of leaks in drains and faucets, unclogging of drains, adding new lines, etc.), • Performs minor painting, carpentry and masonry work (e.g. preparing surfaces and using brush, sprayer, or roller to apply paints, stains, and varnishes, hanging doors, fitting locks and handles, etc.)., • HVAC certified having knowledge on systems and be able to maintain, repair and replace HVAC systems., • Diagnose problems, replace or repair parts, test and make adjustments., • Schedule and complete preventative maintenance program, • Read and interpret equipment manuals to perform required maintenance and service., • Responds to emergency situations during and after hours for the purpose of resolving immediate concerns., • Able to work flexible hours, • Comply with safety regulations and maintain clean and orderly work areas. ed2skumnhh

Job Description 3rd Shift 10:00pm - 7:00am The Inventory Cycle Counter is responsible for maintaining accurate inventory data in PRMS and providing support as needed in the Inventory department. This requires daily cycle counting and inventory maintenance, packaging, film, condiment, trailers and Finished Goods inventories. Duties and Responsibilities: • Timely and accurate inventory of raw materials, packaging, film, and condiments., • Accurate data entry and file maintenance in PRMS., • Follow proper documentation procedures in accordance with SOX requirements and other company procedures., • Interface with production, warehouse, scheduling, purchasing, etc., as needed., • Inventory variance review, research, and explanation as needed. Also, follow-up on findings of that research as corrective actions where appropriate. This also includes MUV research and reports as required or requested by the Accounting Department or Inventory Supervisor., • Report Peco Inventory on a weekly basis and an explanation for any variances., • Maintain files so that they are readily available for review., • Communicate with Production, Scheduling, Purchasing, Transportation, Customer Service, and Logistic team on a regular basis (proactive communication and information sharing as needed)., • Good communication skills, • Computer Knowledge: MS Word and Excel, • Highly motivated individual who is a self-starter, • Ability to Multi-task and work in a fast-changing environment with minimal supervision, • Team oriented with good interpersonal skills, • Ability to work, days, nights, and weekends as necessary, • Bilingual English/Spanish, • Forklift Certified, • Computer: AS400 The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed, as an exhaustive list of responsibilities, duties and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Job Posted by ApplicantPro

Job Description Electronic Technician PRIMARY FUNCTION: The Electronic Tech’s primary responsibility is to preserve the excellent condition and functionality of the equipment and facility. Duties include PLC, VFD and PID troubleshooting, electrical and electronic repairs, maintaining and developing equipment improvements and solving daily manufacturing equipment issues, as well as conducting quality assessments. SPECIFIC RESPONSIBILITIES: Knowledge and solid understanding of Programmable Logic Controls (PLCs), variable frequency drives, motors, encoders, electromechanical systems, and electronic sensors of all types. ● Work closely with mechanical maintenance personnel during breakdowns and improvement projects. ● Ability to read and use schematics, manuals, technical drawings, work orders, etc. ● Excellent electrical troubleshooting skills. ● Keep the work area safe, clean, and organized. ● Maintain and create procedures and documentation. ● Develop and maintain a knowledge of the processes and materials utilized in the manufacture of products in the cable industry. ● Develop and maintain a level of professionalism in verbal and written communication with internal and external customers/suppliers. ● Perform other duties as designated by the direct supervisor and engineering management. ● Under the direction of the supervisor, be available to work overtime assignments as required to fulfill the position requirements and responsibilities. ● Participate in and lead continuous improvement. ● Communicate shift-to-shift information to the manufacturing technician on the following shift. REQUIREMENTS: ● High School Diploma Required. ● 3 years of manufacturing experience ● Associate degree preferred. Company DescriptionOur passion geared for your success. CIS is committed to helping you succeed whether you are a client needing qualified candidates or an individual looking for a new opportunity. We make it our mission to help you succeed.Our passion geared for your success.\r\n\r\nCIS is committed to helping you succeed whether you are a client needing qualified candidates or an individual looking for a new opportunity.\r\n\r\n We make it our mission to help you succeed.

Job Description CMM Realty is seeking a qualified Maintenance Technician in the Columbia SC area. The Maintenance Technician works to prepare recently vacated apartments for market readiness and availability to rent to another tenant. This position will also respond to service work orders, perform HVAC repairs/troubleshooting, painting and pressure washing duties, grounds keeping, etc. Essential Duties and Responsibilities: • Receives “make ready” assignment; gathers all necessary tools, equipment, and supplies needed to make an apartment unit available to rent., • Checks air conditioning unit, heating unit, water heater, and all appliances; makes minor repairs if needed, • Checks lighting and plumbing fixtures; makes minor repairs and replacements as needed., • Repairs or replaces baseboards or trim as needed., • Checks all doors and windows and re-keys all locks., • Repairs holes in walls and performs painting duties as needed., • Responds to service calls to make less technical repairs or replacements, • Universal EPA license, ability to handle Freon and work on HVAC, • Ability to read and understand written instructions and complete standard paperwork., • Able to work in moderately difficult environments and to regularly lift items weighing up to and occasionally above 50 lbs., • Ability to perform basic work in HVAC, electrical, plumbing, painting, and carpentry, • Ability to understand basic instructions and follow a checklist of tasks, • Skill in using basic hand tools, • Knowledge of safety procedures While performing the duties of the Maintenance Technician, the employee is required to sit, stand, bend, walk, use hands and fingers to control objects, reach with hands and arms, climb stairs and ladders, balance, stoop, kneel, crouch, crawl, talk, and hear. The employee must be able to lift 25 pounds individually and up to 50 pounds with assistance devices (dollies, hand trucks, additional persons). While performing the duties of this job the employee normally works primarily in an outdoor environment exposed to adverse weather conditions. It should not be construed that these requirements are the exclusive standards of the position. Employee will follow any other instructions and perform any other related duties and tasks as may be required by supervisor. Our company provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description 2nd Shift - 4:15pm - Until The Machine Operator should be able to independently operate identified/assigned packaging machines installed at the site. Duties and Responsibilities: • Regular and reliable attendance is an essential function of this position., • Compliance to SOP's, GMPs, Housekeeping, Safety, and all other FE policies., • Must inspect settings for codes, dates, leaks, oxygen levels, and seals to ensure proper operation of the assigned equipment., • Completes all required safety, Food safety, production, maintenance, etc. documentation as required. These forms which include, but are not limited to packaging machine forms, quality forms, packaging downtime forms, forming tube inspection and Teflon tape related forms., • Be able to participate in process improvement projects or new product testing., • Report any equipment malfunction to the PMO, floor coordinator or supervisor immediately., • Report any unsafe condition immediately., • An Operator III is able to independently run, and support assigned designated packaging machines and support equipment., • Assists higher level Operators as needed., • Executes necessary changeovers in equipment, film, printers, and related ancillary processes while ensuring production expectations are met., • Assure that all date coding and bag labeling is correct i.e., packages, boxes, etc., • Plan ahead on supplies needed for upcoming products per schedule., • Keep work area and equipment clean and free of garbage/debris at all times., • Able to assist in different lines or baggers as needed., • Works as directed and as a team, • Supports teammates, • Contributes to goals, • Ability to set up multiple machines for startup and during production, • Must be able and willing to assist in all jobs on line to keep machines running at all times., • Works cooperatively with process owners to maintain quality standards, • Assures quality products are being produced by meeting quality specifications for production on assigned line(s). Uses a variety of means for measurement such as equipment setting confirmation along with probes, tanks, and meters to monitor such things as bag atmospheres, leaker rates, weights, etc., • Makes machine adjustments as needed to achieve and maintain expected equipment performance., • Employees may be assigned to perform other tasks such as packing, palletizing, trimming, inserting master packs, housekeeping, rework, general labor activities, etc. on a temporary basis., • Responsible for actively supporting the other members of the employee's work team including assisting with cross-training, new-hire/buddy assignments, and process support during breaks, meal periods, and other staff coverage as needed., • Able to pass both written and hands-on LOTO (Lock-Out Tag-Out) training on a yearly basis and be able to successfully lock out machinery as needed., • Can advance to Machine operator II through training and education after 1 year. Required Qualifications/Skills: • Must have basic mechanical troubleshooting skills and know basic math such as addition, subtraction, multiplication, division, percentages, simple formulas, and conversions., • Must take a written test to demonstrate proficiency., • Must have ability to accurately track downtime and performance indicators., • Must be able to successfully speak, read and write English at the level of work instructions, diagrams and related equipment documentation and support materials., • Must adhere to GMP's (Good Manufacturing Practices) and PPE's (Personal Protection Equipment). Must be able to lift 75 pounds (dead lift) continual and box opening for 8 hours a day or more. • Must pass a math aptitude test and must pass the required strength physical examination., • Must have repetitive hand and eye movement skills., • Must be able to stand for the duration of the shift (8 hours or more), perform repetitive motions throughout the shift such as push/pull/lift, twist, stoop, and bend continuously through the shift, • Be able to climb stairs or step up onto a platform several times throughout the shift., • Must be able to work in a noisy, wet, and cold environment of approximately 30-34 degrees Fahrenheit, • Must be able to work 6 or more consecutive days including overtime, any shift, late nights, weekends, and holidays if necessary Other Desired Qualifications/Skills: • Prior experience in a similar temperature/strenuous work environment preferred., • Bilingual English/Spanish Experience: Must have previous experience operating related food processing equipment or equivalent. Must pass the written exam before being assigned to Operator III. Prior experience in a packing environment Education/Training: High School diploma/GED, some Technical School coursework, or Mechanical/Vocational Certification Other Information: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed, as an exhaustive list of responsibilities, duties and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Job Posted by ApplicantPro

Job Description Position Summary The Food Services Supervisor role supervises and manages the preparation and serving of Program meals while teaching and supervising Youth within the Culinary Arts curriculum. Essential Job Duties • Plan, supervise and manage kitchen operations and services based on sound principals of nutrition, Hazard Analysis and Critical Control Points (HACCP), and culinary techniques to ensure food quality,, • Instruct and supervise youth in the Culinary Arts curriculum, including meal preparation, health, and hygiene, serving and storage and maintenance of all equipment within compliance standards,, • Adhere to and maintain all applicable Federal laws, School Board policies, and Food Service directives, nutrition, and safety rules, regulations, and departmental guidelines,, • Operate all food preparation equipment in accordance with applicable sanitation and safety guidelines and regulations of the appropriate Health District,, • Ensure safe storage of perishable items and maintain secure storage of kitchen area facility, equipment, and supplies, store food according to health requirements and standardized food storage practices,, • Provide effective leadership to Team Members by maintaining and promoting a positive culture, provide Team Member recognition, and development opportunities,, • Responsible for interviewing, hiring, and training Team Members; planning, assigning, and directing work; appraising performance to include coaching and performance development; manage training needs through learning management system; reward and coach Team Members; address complaints and resolve problems timely,, • Oversee and encourage recycling practices and waste disposal according to policies and procedures,, • Ensure all food, supplies and equipment are ordered and received on a timely basis while maintaining financial integrity,, • Maintain and submit accurate record keeping as required, i.e., daily/weekly/monthly reports, production records, inventories, contract audit documentation and equipment, supply, maintenance log,, • Utilize various cleaning agents, mixing according to label instructions, and using in accordance with prescribed safety precautions and directions,, • Actively participate in Administrative Reviews, Health Inspections, audits, and inspections relating to food service operation,, • Attend and maintain appropriate crisis intervention and physical restraint training and certification as defined by state and contract requirements,, • Prevent and intervene in youth altercations and incidents, using the authorized state mandated training methods,, • Attend and maintain CPR and First Aid certification by a nationally recognized organization,, • Administer first aid and CPR during emergencies in accordance with National standards,, • Maintain ServSafe Certification,, • May transport youth and drive for other work-related tasks,, • Position requires driving on a regular basis,, • High School Diploma or equivalent (GED),, • Current ServSafe certification preferred; ability to obtain and maintain ServSafe Certification required,, • Minimum of three (3) years’ experience in the food service industry, preparing and serving meals to groups of 25-50 people,, • Prior food service experience within a school environment preferred,, • Minimum of two (2) years’ experience in a supervisory capacity,, • Growth opportunities – we pride ourselves on developing our leaders from within, • Health Benefits – Medical, Dental, Vision, & Prescription Drug plan options; Health Spending Account, Company paid Life Insurance and AD&D, • PTO & Paid Holidays, • Wellness Benefits – EAP, Health Coaching, Stress Management Programs, etc., • Employer Funded Pension Plan, Voluntary 403(B) Retirement Plan, Student Loan Forgiveness Program, • Pet Insurance, World Travel Assistance, Car Rental discounts, Gym Membership discounts, and more.

Job Description JOB PURPOSE This position is responsible for maintaining the grounds and outer appearance of all JJE’s buildings and affiliate properties as requested. Supervise and performs groundskeeping, landscaping, and maintenance duties on all assigned grounds, properties, parking lots, and roadway areas. DUTIES AND RESPONSIBILITIES • Ensures all safety procedures and policies are followed on the site at all times, • Inspects and reviews work in assigned areas to ensure that cleanliness, efficiency, safety standards, and completion is met., • Trains staff in the proper use of cleaning equipment, chemicals, equipment use, methodology and techniques., • Checks for and reports any repairs needed in assigned work areas., • Cuts lawns, Trims edges around walks, flowerbeds, and walls, including unimproved areas. Must be able to operate mowers, weed eaters, edgers, blowers, rototillers, blade, bucket, utility vehicle, lot vacuum, trailers and additional equipment pertaining to groundskeeping., • Must be able to repair minor irrigation systems issues (learn more complex systems), • Scheduled preventive maintenance on lawn care equipment, • Ability to maintain grounds by trimming, de-weeding and general clean-up, • Must perform planting, mulching, and edging of lawns, • Remove weeds and debris from pathways and flower beds, • Trim hedges, bushes, and shrubs as needed or on a monthly cycle, • Ensure that all work areas and equipment are free of obstructions and debris, • Must have high awareness and strong commitment to professionalism and safety, • Remove and dispose of debris from work sites and keep areas and equipment well- organized, • Be accountable and responsible for the proper use and care of company equipment, • All other duties, as assigned QUALIFICATIONS Required Qualifications: • High School Diploma or equivalent, • Dependability, Detail- & Deadline-Oriented, Time Management Skills, Safety Awareness, • Always maintains professionalism and a positive attitude, • Career driven with a desire to grow with the company., • A good team player with the ability to take direction and follow through on tasks, • Strong attention to detail, • Maintain confidentiality as required Preferred Qualifications: • Functional knowledge of various commercial lawn care equipment, • Edger, • Hedge trimmers, • Pole trimmers, • Chain saw, • Brush cutter, • Grass trimmers, • Ability to train all employees to safely operate a commercial zero turn mowers and all other powered equipment WORKING CONDITIONS The job requires a person to work in conditions that include extreme heat and cold; a high noise level, which may, at times, require normal hearing protection in the form of ear plugs; heights; and dealing with chemicals. Hours may vary based on business needs, including working regular shifts as outlined and/or occasional weekends, or overtime, if needed. PHYSICAL REQUIREMENTS Team members are constantly standing, walking, carrying, pulling/pushing, bending, seeing, kneeling, stooping, reaching, hearing, as well as operating machinery. Team members will be lifting/maneuvering objects weighing 50 lbs. or less regularly. DIRECT REPORTS Not Applicable. Must be at least 18 years old. WE ARE AN EQUAL OPPORTUNITY EMPLOYER Export Control Compliance Notice This position may involve access to technology or software source code subject to U.S. export control laws (ITAR/EAR). Employment is contingent on verifying U.S. Person status or obtaining any necessary export license/confirming the availability of a license exception. Applicants must provide information for export control screening, which will be reviewed for compliance. Ferrous E&T may elect not to pursue a license or exception and may decline to proceed with an applicant on that basis.

Job Description Job Title: Client Services Associate Reports To: The Client Services Associate will report to the Client Services Supervisor, Client Services Manager, or equivalent leadership. Job Overview: The Client Services Associate provides exceptional office and mail services, delivering operational functions in the following areas: processing of inbound/outbound mail, distributing/delivering of mail, shipping and receiving product and supplies to support onsite business service center, replenishing/organizing/ordering office supplies (pens, paper, toner), insuring copy/print machines are functional and stocked, serving as a backup to the front of office (reception/concierge), and providing light maintenance/cleaning. Overall, this position continuously offers the highest level of service to all client and SPS employees while maintaining a professional image of the company by providing prompt, courteous and efficient service. Duties and Responsibilities: • Provides 5-star customer service to all employees (in all forms of communication)., • Receives inbound mail/packages and sorts incoming mail and inputs into chain of custody software package., • Manages outgoing mail/package transactions., • Performs duties associated with shipping and receiving of materials., • Notifies employees upon receipt of inbound deliveries., • Distributes mail/packages to company personnel., • Acts as point of contact for company personnel on mail/package inquiries., • Performs daily key ops of convenience multi-function devices (ensuring functionality, replenish toner/paper)., • Submit work orders for certain requests., • Service and replenish the barista, pantry, conference, kitchen, or meetings areas., • Will perform meeting room and conference room set ups., • May perform building occupant moves within assigned facilities., • Will perform light maintenance and cleaning duties as assigned., • Maintains the Business Service Center area in a neat and orderly fashion., • Monitors level of office supplies on the floor, and replenishing and orders accordingly., • Assists with copy/print orders and/or monitoring the copy/print equipment for satisfactory functionality., • Proactively seeks out additional work during downtime., • Builds professional relationships with customers and other teams., • Maintains professionalism and composure when interacting with all employees., • Trains back-up and providing guidance on policies and procedures., • Determines what additional support is needed when handling sensitive inquiries., • Provides exceptional customer service to client., • Strong verbal and written communication skills., • Excellent customer service skills., • PC skills MS Office Suite experience., • Ability to handle multiple tasks simultaneously., • Good organizational skills., • Working knowledge of MFD equipment., • Requires knowledge and understanding of shipping/receiving procedures and ability to comprehend instructions., • Possesses ability to work independently and capable of completing projects., • High School Diploma (or equivalent) required., • 1+ years prior work experience preferred., • Ability to work assigned work hours determined by manager., • Excellent organizational and time management skills., • Analytical abilities and aptitude in problem-solving., • Superb written and verbal communication skills., • Current knowledge or ability to learn computer-based systems required for functions of position., • Required to maintain an overall professional appearance and attitude., • Approximately 50% of the time this position requires the below physical demands., • Fine and/or gross motor skills, including the ability to grasp, lift and/or carry or otherwise move packages on a standard wheeled cart with a load capacity of 60 lbs., • Ability to walk, bend, kneel, stand, and/or sit for an extended period of time., • Manual dexterity required for operating office machinery (phone, copy machines, binding equipment, etc.). Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. WHAT WE OFFER • Career Growth: An opportunity to enter a job that allows you to learn new skills or use a variety of them that may lead you to uncover other career opportunities!, • Learning & Development: At SPS, we promote a work culture of learning so that you can develop to be the best at what you do!, • We Recognize Talent: We offer a variety of recognition programs for all levels of employees!, • Benefit Offerings: Medical, Dental, Vision, HCFSA, DCFSA, HSA, Commuter Transit and Parking, Supplemental Life Insurance, Accident Insurance, Critical Illness, Hospital Indemnity, Legal Program, Identify Theft Protection, Pet Discounts, Pet Insurance, Group Home and Auto Insurance, EAP, Short Term Disability, Life Insurance, Education Discounts, 401k w/ matching, Entertainment Discounts, & Paid Time Off. SPS is an award-winning employer of choice offering outsourcing solutions that leverage Intelligent Automation (Artificial Intelligence & Robotic Process Automation) in more than 22 countries across the globe. In North America, our services include Mailroom Management (both physical and digital), Office Services such as Reception, Lobby Concierge and Conference Room Management in addition to Document Processing Services utilizing leading edge technologies. Our clients today are companies in sectors such as banking, insurance, legal, higher education, advertising and other professional services, including many Fortune 500 companies. SPS is committed to delivering high caliber outsourcing experience to our clients and offering our employees challenging and exciting career opportunities throughout the North America region and globally. SPS is committed to investing in the professional development of our employees and offers competitive comprehensive benefits and diverse development training programs that lead to building careers. At SPS we embrace the uniqueness of our employees and are committed to the fair and equal treatment of all people, applicants, and employees by promoting a culture of access, inclusion, equity and diversity. SPS provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual and reproductive health choices, national origin, age, disability, genetics, military status, gender identity or expression, sexual orientation and/or any other status protected by applicable law. Colorado only: We accept applications for an expected minimum of 5 days from the date it is posted. The posting may remain open longer as needed to ensure a robust and inclusive applicant pool. Applicants are prohibited from using real-time AI (Artificial Intelligence) tools, prompts, scripts, or real-time assistance (including but not limited to chatbots, AI-generated responses, or transcription-based tools) during any and all interviews over any forum or platform. SPS offers reasonable accommodations in the hiring and employment process for individuals with disabilities. If you need assistance in the application or hiring process to accommodate a disability, you may request an accommodation at any time. To view our privacy policy, click on the link below: Data Privacy Statement Acknowledgement Section: By submitting an application, by hitting "Submit Application", you certify that the information contained in this application is true and complete. You attest to the fact that the answers provided are correct to the best of your knowledge and ability. You certify that you have not knowingly withheld any information that might affect your chances for hiring. You understand that any false information or omission (including any misstatement) on this application or on any document used to secure this employment can be grounds for rejection of application or, if you are employed by SPS can be grounds for immediate termination from this company.

Job Description TerraBella Senior Living is the proud operator of more than 20, amenity-, care- and lifestyle-focused communities located throughout the Carolinas, Virginia and Georgia. TerraBella communities together account for more than 1,500 units and span a full spectrum of senior living and care options, including Active Independent Living, Assisted Living, Memory Care and available, short-term Respite Care. TerraBella Senior Living is looking to add Security staff to our community_______________________. Responsibilities: • Promoting and guarding the community property and assets against fire, theft, vandalism and illegal entry by unauthorized persons while meeting and/or exceeding service standards., • Conducts safety and security inspections of all community property to include common areas, resident corridors, parking areas and perimeter access., • Patrols community property to prevent and discover activity in violation of criminal, fire or safety codes., • Watches for and reports irregularities such as fire hazards, leaking water pipes and security doors left unsecured., • Investigates and reports all acts of unlawful or safety hazards that would endanger persons or property., • Investigates all incidents and suspicious occurrences, filing incident report appropriately., • Responds to all security calls and complaints, taking necessary action and handling on-scene emergency situations until relieved by a Supervisor., • Inspects and reports all dangerous conditions and any damaged or defective equipment, machinery and property., • Secures and unlocks areas and buildings in accordance with policy and community expectation., • Assist in emergency response procedures as per community policy., • May be required to drive the community vehicle if necessary., • High School diploma or Equivalent., • State Security Officer License., • One-year job related experience preferred., • Ability to communicate effectively speaking the primary language of the residents., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Basic computer skills required., • Must demonstrate an interest in working with a senior population., • Interacts with guests, residents and staff in a courteous and friendly manner. In addition to a rewarding career and competitive salary, TerraBella offers a comprehensive benefits package. Eligible team members are offered a comprehensive benefits package including medical, dental, vision, life and disability insurances, paid time off, and paid holidays. Team members are eligible to participate in our outstanding 401(k) plan with company match our Employee Assistance Program and accident insurance policies. Thank you for your interest in TerraBella Senior Living careers. If you have any questions about the position you are applying for, please contact the community directly. EOE D/V

Job Description POSITION SUMMARY Utilizes a delivery vehicle to deliver parts and products to all customers. Maintains a neat, pleasant and professional appearance to all business contacts. Ensures all paperwork associated with the task assigned is completed in its entirety and is placed in the proper location for further processing or filing. ESSENTIAL DUTIES and RESPONSIBILITIES • Delivers Parts and Accessories to Retail, Fleet, Wholesale and Internal Customers • Verifies parts noted on the invoices to be delivered match the parts taken for delivery • Reviews with the customer the parts delivered match the part numbers invoiced • Ensures ALL invoices are signed by the customer • Picks up Stock orders and other locally sourced products as needed • Represents the company in a neat, polite and professional manner • Assists other areas within the dealership when all deliveries are completed • Performs routine maintenance on bin locations and re-bins SKU’s as needed. • Other Duties as assigned by Supervisor SUPERVISORY RESPONSIBILITIES / ORGANIZATIONAL STRUCTURE • Reports to the Assigned Department Manager QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE • High School diploma or equivalent a must • Basic inventory knowledge to include receiving practices • Experience in a retail operation dealing with customers REQUIRED SKILLS • Ability to work with others in a team environment and fosters healthy working relationships • Ability to take directions in a fast-paced work environment • Stays focused on and completes assigned tasks in a timely manner • Customer friendly appearance and mannerism, Represent the company in a professional manner PHYSICAL DEMANDS Position requires extended periods of standing, sitting and driving a vehicle. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. WE ARE AN AT-WILL, EQUAL OPPORTUNITY EMPLOYER WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Mark Anthony Brewing is hiring an Industrial Maintenance Technician to be responsible for the daily completion of tasks integral to the operation and overall performance of the Brewery. The maintenance technician performs highly diversified duties to install, troubleshoot, repair and maintain highly automated and advanced production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the plant’s business goals and objectives. The Industrial Maintenance Technician will make certain that Safety and Quality are at the forefront of all activities for both them and their teammates. This role will work closely with other maintenance team members as well as other departments including Operations, Quality and Logistics to ensure daily and weekly tasks are being completed on-time and according to standard operating procedures. This is your opportunity to be a part of an innovative team in a brand new, state-of-the-art brewing facility in Columbia, SC. Accountabilities & Impact: Safety / Food Safety: • Adhere to all Plant and Safety policies and procedures, including wearing Personal Protective Equipment (PPE), as well as adhering to Good Manufacturing Practices (GMPs)., • Ability to effectively troubleshoot equipment to minimize unplanned equipment downtime., • Plan and execute predictive/preventative maintenance efforts to minimize equipment downtime., • Demonstrate effective root-cause problem solving to identify and perform equipment repairs and improvements., • Participate in special projects on equipment upgrades or installations., • Utilize skills in fabrication capabilities such as cutting and welding (mig, tig or stick), and work with electrical systems including 480VAC & 24VDC power., • Maintain accurate records of maintenance activities, including work performed, parts used, and any additional observations., • Ensure PM’s/ work order paperwork is completed before departure from plant., • Follow-up with any team members when passing along ongoing work to the next shift., • Finding parts in the CMMS system., • Ensure parts used from inventory are reported and documented in accordance with inventory control program guidelines., • Ensure smooth shift changes by communicating important information to incoming shifts, including updates on work in progress, equipment conditions, and any outstanding issues or concerns., • Collaborate with your peers and team members to transfer specialist technical knowledge., • Work directly with leadership to develop and execute projects involving continuous improvement, equipment and/or facility upgrades, and the permanent corrective measures of reoccurring problems., • High School diploma or equivalent required. Associates degree, certification or higher within in a technical field preferred, • 1 – 3 of industrial maintenance experience in high-speed manufacturing. Experience in one of the following fields: beverage or packaging (preferred)., • Safe use of various hand and power tools, welders, lifts, multi-meters, industrial shop equipment, • Read and interpret schematics for process and instrumentation diagrams, and repair variable frequency drives, servo motors and controllers, communication systems, PLC input/output cards, and safety modules., • Forklift experience a plus (certification not required)., • Ability to manage well under pressure while staying true to the company values., • Strong work ethic and willingness to take on any task., • Reliable and punctual - must adhere to attendance and absenteeism policy., • Ability to work in a fast-paced environment and prioritize work while multitasking., • Excellent communication skills both orally and written., • Ability to demonstrate and maintain a “can-do” and positive attitude., • Ability to provide and receive open and regular feedback and adjust accordingly., • Works collaboratively within various teams. Ability to adjust communication/leadership style as needed and when appropriate. This position is exposed to occupational hazards, including but not limited to, high noise levels, physical obstacles, exposure to chemicals, etc. * Subject to extreme heat/cold temperatures * Must have sufficient endurance to perform tasks over long periods of time. * Fast-paced and constantly changing work environment. * Ability to lift up to 50 lbs. * Ability to stand/move 8-12 hours per day. * Ability to ascend/descend stairs/ladders throughout shift. * Fine motor skills and dexterity for manipulation * Must wear Personal Protective Equipment (PPE) including (but not limited to) bump cap, safety steel toe shoes, safety glasses, dust masks or PAPRs. * Must adhere to Good Manufacturing Practices (GMPs). What we value here at Mark Anthony: Sense of Urgency • We value sense of urgency because we are a fast-paced company in a fast-paced industry, • We value authenticity because we need to stay real, • We value simplicity; why use 50 words when you can use 5?, • We value humility; there is no room for egos here, • We value trust because unless we are both trusted and trusting, we will not succeed as a team You should be proficient in: • PLC Troubleshooting Skills, • Electrical Troubleshooting Skills, • Mechanical Troubleshooting Skills, • Hydraulics Experience, • PLC Programming Experience, • Variable Frequency Drives (VFD), • Programmable Logic Controller (PLC) (Allen Bradley, Siemens), • Conveyor Systems, • Servo Motors

Job DescriptionDescription: Responsibilities: • Professionally communicate with coworkers, vendors, and residents, • Must possess positive attitude and desire to lead by example, • Be able to work both independently and as a member of a team, • Must be organized and able to prioritize, • Identify and report to management issues involving the employees, property or residents, • Timely complete service requests in occupied apartments, • Maintain common hallways and community room areas, • Turn vacant apartments to make them ready for leasing, • Remove trash and debris from vacant units, assist bailiff with evictions, • Repair or replace window glass and screens, • Paint and/or touch up paint as needed, • Carpentry tasks including: Repairing/replacing drywall, doors, trim molding, cabinets, countertops, tile work, etc., • Basic electrical work including: Replacing light switches, receptacles, GFCIs; Installing light fixtures and ceiling fans; Locating shorts and open circuits, • Basic appliance repairs including replacing: stove burners, switches, and oven elements; refrigerator thermostats, defrost timers, and fan motors; dishwasher switches and pumps; washer and dryer repair, etc., • Basic plumbing work including: Repairing/replacing faucets, tubs, commodes, water heaters, showers, sinks, garbage disposals; unclogging drains; Repairing leaks of all kinds, etc., • HVAC repairs including troubleshooting and replacement of components, etc. Should have or be able to achieve EPA Refrigerant Recovery Certification preferred, • Maintain operable exterior and common area lighting including replacing bulbs, timers, photocells, starters, ballasts, fixtures, and locating shorts, etc., • Remove ice and snow from walkways, porches, and drives as deemed necessary for safety, • Perform general grounds duties, including picking up trash, planting flowers, pulling weeds, laying dirt and mulch, growing grass, moving hoses, fixing fences, sweeping walkways, etc., • Perform routine preventative maintenance to ensure that machines, tools and equipment continue to run properly., • Complete work required by municipalities and building inspectors, • Perform after-hours on-call services for designated maintenance emergencies and customer convenience issues, • Work overtime when needed, • Lifting up to 50 lbs. and climbing ladders to various heights is required, • Competitive wages within the industry., • Health, dental, and vision benefits., • Life insurance and AD&D, • AFLAC, • 401(k) and 401(k) Roth, • Allyhealth Tele-Medicine, • Flexible Spending Accounts, • Paid Holidays and PTO Time, • Training and professional development opportunities., • Positive and inclusive work environment.

Job DescriptionDescription: DASMEN is seeking an experienced and hard-working Groundskeepers to take ownership of the upkeep and maintenance of our property grounds. Responsibilities: • Performs daily cleaning and maintenance of grounds and common areas., • Maintains pool, pool areas, and pool furniture., • May assist with door-to-door trash pick up on communities that offer service., • Trashes out vacant apartments., • Moves appliances, with assistance, using appliance dolly., • Assists maintenance in maintaining a clean and orderly shop., • Accompanies vendors to apartments., • Adheres to company key procedures., • Cleans and shampoos carpet., • Waters plants and grass as required., • Participates in an ongoing community improvement plan and a preventive maintenance program., • Reports any maintenance problems., • Distributes resident notices to residents., • Assists with resident functions as required., • Must be prompt, on time to work and have good, regular attendance., • Adheres to and complies with company safety policies and rules and wears personal protective equipment (PPE) as directed., • Adheres to OSHA safety standards that are applicable to the safe performance of the job., • Maintains courteous and helpful demeanor with residents, prospective residents, co-workers, vendors, etc., • Works overtime, weekend, holiday and evening work as required., • Wears company uniform with photo I.D. badge during work hours., • May be transferred or assigned to work at another DASMEN community., • Must have a mode of communication in which to be contacted at home and to respond in cases of emergency., • Acts as a team member with all associates of the management staff., • Performs other duties as assigned by Property Manager and Maintenance Supervisor. Why You Should Work for DASMEN: • Competitive salary & high bonus potential, • Medical, Dental, Vision Insurance, • Generous vacation and sick leave policy, • Extensive Paid Holidays, • Employee recognition and awards, • Free life insurance, • Short term disability, • Company-wide events, • A work family you can always rely on, • Employee Mentorship program, • Reimbursement program for industry schooling, • Employee housing discount, • Awarded Best Places to Work by multiple organizations, • Associate referral bonus, • Paid maternal and paternal leave, • Ongoing training, • Internal growth opportunities Requirements: • Must have good communication skills to be able to understand and follow directions., • Prefer knowledge of pool maintenance and general grounds care., • Reliable transportation to get to and from work., • Frequent lifts and carries up to 45 pounds., • Occasionally lifts and carries up to 80 pounds. (i.e. bag of concrete)., • Pushes and/or pulls (appliances) using appliance dolly up to 200 pounds., • Moves objects from one floor to another. $13-$17/hourly

Job Description Position Summary: As part of a team, assist in maintaining both the guest and heart of house areas. To perform repairs and preventative maintenance as necessary in accordance with company standards and within safety guidelines. We offer Medical/Dental/Vision benefits, a generous PTO program Established in 1988 as a family-owned business, we have grown into a fully integrated development, management, and investment company that develops, operates, and owns the world’s leading hotel brands as well as boutique hotels. Raines has maintained a family-oriented culture that believes in building relationships with our associates, with our partners and within the communities where we operate. Essential Job Functions: • Respond to guest and staff needs in a timely manner. Prioritizes to ensure guest experience is minimally impacted. Operations to be assisted if within skill set, otherwise immediate supervisor to be updated with needs., • Assist in preventative maintenance program by helping maintain guest rooms and common space areas. Not limited to, but including painting, plumbing, electrical, hardware, small appliances and wall treatment and light HVAC. Experience in one or more fields preferred., • Maintains a current certification in CPR/First Aid/AED training., • Must complete emergency procedures training withing 90 days of hire., • Proficient in use of light power and hand tools in a safe manner., • Reports building system checks and updates team with any deficiencies., • Works with team to complete departmental tasks assigned by Director of Engineering. Projects are prioritized by impact to safety and operation of building., • Maintains and assists in the cleanliness of individual/department work areas., • Adheres to company policies and procedures., • Keep immediate supervisor promptly and fully informed of all problems or unusual matters of significance which require corrective action., • Works with Engineering Team, local authority and 3rd party security based on business demands., • High School Diploma or GED equivalent, • Experience and/or Certification in HVAC, building maintenance technology or relevant field preferred, • EPA, CPO, or similar trade certifications recommended but not required. Experience (2) year of experience in a hotel engineering function or similar role in relevant trade Hours required – Full time position. Scheduled days and time vary based on hotel needs. Must be able to work weekends and holidays. Physical Demands • Employee is regularly required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. This description is a summary of primary responsibilities and qualifications. The job description is not intended to include all duties or qualifications that may be required now or in the future. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Pre-employment background check required.

Job Description Journeyman Electrician East Coast Construction Services, LLC (ECCS) Charleston, SC & Raleigh, NC & Charlotte, NC & High Point, NC Full-Time | Compensation based on experience About Us East Coast Construction Services, LLC (ECCS) is a leading industrial electrical contracting firm serving the Southeastern U.S. We specialize in complex electrical construction projects across diverse sectors including pharmaceuticals, water treatment, biofuels, textiles, and food-grade manufacturing. Our team is growing rapidly as we continue to prioritize safety, innovation, and excellence in delivering high-quality electrical, instrumentation, and control systems. Today, ECCS successfully manages projects ranging from $500K to $20M, driving industrial progress across the region. Role Summary The Journeyman Electrician is responsible for installing, maintaining, and repairing electrical systems and equipment in manufacturing and industrial environments. This role requires expertise in industrial controls, low-to-medium voltage systems, and the ability to interpret blueprints, schematics, and electrical codes. Collaboration with engineers and other trades is key to ensuring safe and efficient operations. This position is based in the Charleston, SC/St. George, SC area, with potential to travel to surrounding project sites. Travel teams receive per diem. Key Responsibilities • Install wiring, conduit, and control panels per blueprints and supervisor direction, • Set up, troubleshoot, and repair motor controls, transformers, and switchgear, • Install and integrate PLCs, VFDs, sensors, relays, and actuators into automated systems, • Ensure compliance with National Electrical Code (NEC), OSHA regulations, and company safety standards, • Perform lockout/tagout (LOTO) procedures during maintenance, • Inspect electrical installations for quality and code compliance, • Document work performed and maintain accurate service and maintenance records, • Collaborate with other trades and engineering teams on site Qualifications ✅ 3+ years of industrial electrical experience (construction or project-based) ✅ NC Apprentice Electrician certification required (NCCER) ✅ NC Electrician License preferred ✅ PLC/automation experience is a plus ✅ Valid driver’s license required ✅ Bilingual (English/Spanish) preferred ✅ Familiarity with OSHA 1910.147, NEC 2023, and safety best practices ✅ Basic proficiency in Excel or Google Sheets ✅ Experience with Procore a plus Compensation & Benefits Competitive pay: based on experience Health insurance ️Paid time off (PTO) 401(k) retirement plan Ongoing training and professional development Career Growth As a growing firm, ECCS offers clear career advancement opportunities into field management or operations roles. We also provide reimbursement for professional certifications (such as NC Electrical License or PMP) and continuous training in emerging areas like sustainable construction and advanced project management tools. Join Our Team Be part of a company that values craftsmanship, safety, and innovation. If you’re an experienced electrician looking to take the next step in your industrial career, apply today and grow with East Coast Construction Services, LLC.

Job Description NON-CDL Universal Delivery Merchandiser $43,000-$50,000 / Year 401K – Medical – Dental- Vision & Life Enjoy a MINIMUM of (20) 4-day weekends per year, AND PTO accrual day ONE Enjoy an incredible WORK/LIFE balance – HOME EVERY NIGHT POSITION PURPOSE Beverage South (GA/SC) is looking for a Delivery Merchandiser to join the Beverage South Family! This position will deliver our products to our local accounts Monday through Friday and be home every night. If you are an experienced delivery driver then please apply and have fun while you work with BEER. The Delivery Merchandiser – Non CDL works under regular supervision Monday through Friday, starting no later than 5:30 am to completion delivering product to licensed accounts on assigned routes. Duties include collection of payment and strict adherence to Beverage South and supplier quality assurance procedures. Essential Duties and Responsibilities: Adheres to all check-in/check-out policies and procedures. Assumes full responsibility for all products assigned to be delivered daily to include safeguards of same along with vehicles, and equipment from theft, abuse, or loss. Sign for load sheet and verify number of pallets and equipment. Review stop sheets daily and contact Delivery Supervisor or Distribution Manager regarding missing accounts. Drives truck to deliver all ordered products to daily assigned accounts. Honors all customer requests authorized by management. Stock and rotates all existing and delivered products on shelves and back stock. Sets up all promotional displays as assigned by specific salesperson. Adds and replaces all POS material as directed via daily hand held communication. Collects empty kegs and out-of-date products. Pick up product damaged by a Beverage South employee or is a manufacture defect. Collects payments for the delivery in checks or money order. Provides customer with invoice of transaction for product sold, notes all adjustments on the invoice, obtains signature of customer on the invoice and as a driver signs the invoice for verification before leaving the account. Completes daily check-in procedure and reconciliation. Completes daily deposit and verifies with computer totals. Reports market trends and competitive activity to supervisor and recommends response, if appropriate. Any time a truck is backed into a Beverage South dock the wheels must be chocked. Performs daily check equipment daily, including vehicle fluid levels, and reports any maintenance or performance problems. This includes cleaning the cab of trash and sweeping out the trailer daily. Operates Company vehicle according to Fleet Safety Manual to include reporting any and all (company and personal) vehicle accidents immediately to Delivery Supervisor and follow the Beverage South accident policy as outlined therein and additionally adheres to all DOT regulations. Performs other duties as determined by the Distribution Manager/Supervisor. Qualifications: Completion of Company training program. Possess in-depth knowledge of company products: every brand and package sold and benefits of each product; policies; procedures, and operations. Knowledge of State laws regarding the sale of alcohol. Possess grooming and hygiene practices consistent with maintaining good customer relations. Adapts well and is flexible with not having a daily routine. Education/Experience: High school degree or equivalent. Prefer 3-6 months commercial driving experience and prior route sales or delivery experience. Language Ability: Interpersonal skills to deal with customers effectively and in a professional, business-like manner. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions, and decimals. Basic understanding of completing and balancing a deposit with product sold. Reasoning Ability: Ability to understand the basic operation of handheld units and associated software. Certificates and Licenses: A valid driver's license and DOT Medical Card. Supervisory Responsibilities: None Physical Demands: The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Heavy work. While performing the duties of this job, the employee will handle or feel; reach with hands and arms; talk and hear. Requires continuous standing, walking, bending, kneeling, climbing, routine and repetitive pushing/pulling 150-500pds. and lifting/carrying 26-50 pounds and occasionally up to 160 pounds. Individual must be physically capable of occasionally moving product into and out of customers’ establishments in large volumes in a relatively short period of time. Employee is exposed to outside weather conditions and deals with sudden temperature changes when entering and exiting refrigerated coolers. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus to read information on electronic devices and on paper, and to operate a motor vehicle. Continuous jostling from riding and driving a truck. Measures: 1. Attendance., 2. Route reconciliation including long and shorts on cash and product., 3. Rotation and Quality Assurance of all delivered and stocked product., 4. Safety, related to all aspects of daily assigned responsibilities., 5. Maintaining consistent professional customer relationships., 6. Vehicle Inspections. Success Factors: 1. Drive and energy, 2. Team work, 3. Honesty and Integrity, 4. Accountability and ownership, 5. Pride in the Beverage South product line Pride in your Job! Drug Free Workplace and Equal Employment Opportunity

Job Description Looking for outgoing well rounded individuals who are experienced in either Locating or Drilling. Candidates should have at least 1-3 years experience and a CDL is a plus. Directional Driller/Locator Responsibilities • Operate Horizontal Directional Drill, • Assist in potholing and remediation, • Assist with setting hand holes and completing tie ins, • Drive equipment to job site, • Confirms with locator/lead the bore path to drill, • Set equipment up including the drill, water tanks and grounding the machine, • Drill out following the predetermined drill path to the exit pit, • Communicate with the locator/lead via radio to confirm the location of the drill head, • Assist with the install of proper pulling gear and hook up product, • Reverse process to install product, • Oversee laborers and/or crew member’s work and monitor time usage, • Conduct post-job quality checks, • Clean, check fluid levels and conduct a visual inspection of vehicle/equipment to assure your vehicle/equipment is performing at optimum safety, perform the required pre-trip, post trip inspections and the required paperwork, perform needed maintenance including winterizing equipment., • Communicates with Supervisor daily to turn in required paperwork (i.e. Dailies labor hours, F and D tickets, vehicle maintenance reports, etc.), • Follows specifications for the job and company policies, • Complies with safety procedures while driving and at job site, • Strive for optimal production while working safely and performing quality work, • 1 to 3 years demonstrated Horizontal Directional Drilling experience, • Strong knowledge of underground utilities, • Familiar with Ditch Witch equipment, • Knowledge of underground pot holing is a plus, • Working knowledge of DOT regulations (Vehicle and Operator Qualifications), • Understanding of client and company work specifications, • Ability to comply with the “Operator’s Manual” for your particular equipment, • Self-motivated, safety, quality and production minded, • Ability to read and comprehend and follow all quality/safety policies and procedures, • Maintain valid Commercial Driver’s License (CDL Class A, with airbrake endorsement and tanker endorsement), • Willing to travel

Job Description The Certified Weld Inspector will perform inspections of welded, lined, and coated assemblies to verify that they meet required standards. • Perform visual inspections of welded assemblies to verify that standards are met., • Verify and ensure that appropriate welding equipment is used for the work., • Verify and ensure that the welding is performed in compliance with the applicable welding procedure., • Witness and supervise performance testing of outside agencies (as appropriate)., • Verify documentation of procedure qualification test results., • Document results of inspections., • Ensure requalification requirements are maintained., • Interpret drawings and documents., • Inspect and test welded joints of work currently in progress and work that is completed., • Inspect to ensure that dimensions, linings and coatings are in conformance with contract drawings and work order specifications., • Perform inspection and testing of production weld samples, linings and coatings., • Must be reliable and punctual., • Must follow and enforce all safety standards., • Must be physically able to perform the essential functions of the job, with or without reasonable accommodations., • Must have a high school diploma or general education degree (GED); three or more years related experience and/or training; or equivalent combination of education and experience., • Must have valid Certificate of Welding Inspector (AWS QC1 CWI)., • Must be able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Must be able to write routine reports and correspondence., • Must be able to speak effectively before managers or groups of employees., • Must be able to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals., • Must be able to compute ratio and percent and to interpret bar graphs., • Must be able to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Must be able to deal with problems involving several concrete variables in standardized situations., • Must be able to read, understand, and interpret job drawings and specifications., • Certification as ASNT-SNT-TC-1A Level II in Magnetic Particle (MT), Dye Penetrate (PT), and Ultrasonic Testing (UT) NDE preferred., • The employee is regularly required to use hands to finger, handle, or feel, and talk or hear., • The employee is frequently required to stand; walk; reach with hands and arms; and stoop, kneel, crouch, or crawl., • The employee is occasionally required to climb or balance., • The employee must regularly lift and /or move up to 25 pounds, and occasionally lift and/or move up to 100 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus.

Job Description Job description: We are looking for a detail-oriented HVAC Technician to help us install, maintain and repair heating/cooling systems. The ideal candidate will have experience in cleaning air quality equipment and performing maintenance procedures as well as providing emergency repairs when necessary. HVAC Technician responsibilities include Troubleshooting issues, performing maintenance and installations as needed and prioritizing calls based on business goals. Ultimately, you will work with various sites to ensure their HVAC units run smoothly at all times and perform necessary installations and repairs as needed. Responsibilities • Discuss various repair/replacement options with supervisor or Regional team when it comes to heating and cooling systems, • Troubleshoot issues with a current system as they are identified, • Conduct performance tests with specialized tools and adjust system settings, • Travel to different sites throughout the day and determine problems, • Categorize and organize inventory to limit unnecessary losses to the companyRequirements and skills, • Proven work experience as an HVAC Technician or similar role, • Current driver’s license and ability to drive to different locations, • Required state licensing for HVAC technicians if required ka6tyITTAr

Job DescriptionCompany Description Harsco is recognized for technical leadership and worldwide experience in virtually all major aspects of railway track maintenance. We enable railroads to operate at peak efficiency over smooth, precisely aligned track that increases railway safety while reducing fuel consumption and other key operating costs. Our broad array of equipment and services support every type of railway operator, from major national and international railway systems to short lines and high-speed urban transit networks. Job Description Reporting to the Machining Supervisor, the Machinist A is responsible for performing advanced machining operations with a high degree of precision, efficiency, and safety. This role requires expert knowledge of machining practices, strong technical skills in CNC programming and setup, and the ability to produce quality parts that meet engineering specifications and production requirements. Key Responsibilities • Demonstrate expert-level knowledge of machining practices, including part creation, quality assurance, and safe work methods., • Independently interpret complex blueprints and technical drawings., • Set up, program, and operate CNC lathes, vertical mills, and horizontal mills., • Write CNC programs from scratch, select appropriate tooling, and verify part quality to specification., • Apply advanced knowledge of machine tools, feeds, speeds, and tooling applications to optimize machining processes., • Adjust and edit CNC programs and offsets as required to maintain precision tolerances., • Collaborate with process engineering to develop setup sheets, document programs, and support future repeatability., • Maintain production goals while upholding strict quality standards., • Accurately perform shop math and machining calculations., • Follow written and verbal instructions, ensuring proper documentation and workflow continuity., • Uphold all safety and 5S standards in the machine shop environment.Qualifications, • High School Diploma or equivalent (required)., • Minimum of 8 years of machining experience in a job shop or manufacturing environment., • Experience with horizontal machining centers (preferred)., • Associate degree or technical certification in Machine Tool Technology (preferred)., • Can be relied upon to work regularly and on time, and maintain consistent attendance., • Ability to work effectively and cooperatively with team members and other departments., • Ability to manage multiple tasks and priorities in a fast-paced environment., • Proficiency with computers and CNC programming software for communication, documentation, and data entry., • Ability to lift up to 40 pounds safely. Additional Information We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status or genetics. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. If you have a difficulty applying for any job posted on Harsco Rail’s website because a disability prevents you from using the online system, Harsco Rail offers the following alternate application procedure: Contact Matthew Fink, HR, at 803-822-7589 and Harsco Rail will arrange for an alternate method of applying and will consider your application together with all other applications received for the job. Please call only for disability application.All your information will be kept confidential according to EEO guidelines.

Job Description JOB PURPOSE: Each Leasing Consultant has primary marketing responsibility as it pertains to interfacing with prospective residents at the community, handling day-to-day issues with current residents, and coordinating the renewals of existing leases. In this position, Leasing Consultants are the community’s most important personnel as they can determine how well a community does in a very competitive marketplace. Specific training for Leasing Consultants centers on Fair Housing, closing techniques, and overcoming objections. PRIMARY DUTIES & RESPONSIBILITIES: Will always include those specifically assigned by the immediate supervisor. * Provide excellent service to all residents, prospects, and visitors to the community. * Effectively lease apartments in accordance with occupancy goals. * Follow Fair Housing Standards in all dealings with prospects and residents. * Conduct outside marketing under the direction of the Assistant Manager and the Community Manager. * Conduct the application review for each lease including credit and income verifications and background checks. * Complete lease paperwork and files for each resident to include the lease, all addendums and other proper documentation and signatures. * Ensure the condition of leased apartments prior to move-in, including a final inspection. * Follow up with residents throughout their lease terms, promote the annual renewal campaign for the community, manage lease renewals and complete lease documents. * Complete all tasks necessary to successfully operate the leasing office. Specific Responsibilities: Daily/Weekly: * Daily Opening and Closing Procedures: Perform a daily “marketing” inspection, including the check of the model, the condition of the leasing path, and amenities areas. Pick up trash while carrying a trash bag and sparkle kit. * Answer all phone calls, emails, and voicemails that come in throughout the day. * Signage Inspection: Inspect bootlegs, banners, balloons, and brochures. * Leasing Office/Clubroom Appearance: Vacuum and clean clubroom as needed, if not performed by housekeeper. * Refreshments: Prepare cookies or restock candy, beverages, and coffee each morning. Notify Community Manager when supplies are needed. * Leasing: Greet prospects and show apartments and coordinate the leasing process. Review applications from applicants and provide information to Assistant Community Manager for verification. * Leads: Maintain Guest Cards and maintain leasing notebook. Follow-up on all traffic with a Thank You email the same day as their visit and a phone call within 24 hours of their visit. Review all Leads on a weekly basis and ensure that they are complete with notes on follow-up communication. * Applications: Enter prospect information into Entrata as directed by Assistant Community Manager. Follow up with applicant to retrieve any incomplete information. * Lease Files: Once Lease file is complete and all signatures have been provided, ensure that a completed lease file is forwarded to Assistant Community Manager for review and approval. Once approved, send a copy to resident and file lease properly. * Work Orders: In conjunction with Maintenance Team, enter work orders into Entrata. Provide a follow-up call if work cannot be completed within 24 hours. File work orders. Notify Community Manager of problems. * Renewals: complete renewal effort tasks as necessary. Monthly/On-Going: * Leads: Archive inactive Leads. Ensure Leads and Applicants in Entrata are up to date. * Outside Marketing: Conduct outside marketing under the direction of the Assistant Manager and Community Manager. * Audit: Complete audits of lease files and Entrata data as instructed by the Assistant Manager and Community Manager. * Market Knowledge: Stay up to date with competitor rental rates, features, and specials to effectively overcome objections while marketing apartments to prospective residents. TURN: * Roommate Matching: Assist Assistant Community Manager with roommate matching processes and communication. * Move-In Communication: Communicate to Assistant Manager and to the Maintenance Supervisor any resident requests or issues during the Turn process. * Move-In Process: Coordinate Move-In process with new residents. In addition to completing lease packet at time of move-in: * Enter gate codes, distribute parking decals. * Obtain utility hook-up verification from resident (or no mail key). * Forward Water submetering hook-up sheet to Assistant Community Manager for processing (if property submeters). * Confirm Resident Contact Information & Demographics in Entrata QUALIFICATIONS: * Professional and enthusiastic demeanor resulting from sales, leasing, marketing, and customer service experience. * Able to demonstrate a positive attitude and to enthusiastically and effectively communicate the benefits of the apartment community to prospective students, their parents, and University personnel. * Excellent customer service, sales, and negotiation skills. * Good communication and listening skills. * Able to speak effectively before groups of customers or employees of organization. * Able to read and understand lease documents. * Able to be an effective team player and interact well with others. * Organized and detail oriented. * Patient, even-tempered and works well under pressure. * Able to read and interpret documents such as safety rules, legal correspondence, and procedure manuals. * Able to write routine reports and correspondence. * Able to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Able to compute rate, ratio, percentage, discounts, and pro-rations. * Able to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. * Effective time management skills. * Able to maintain confidentiality. * Able to follow directions from a supervisor. * Able to understand and follow posted work rules and procedures. * Able to accept constructive criticism. * Able to work weekends or overtime as job requires. EDUCATION AND EXPERIENCE REQUIREMENTS: * Bachelor’s Degree preferred; or High School diploma or General Education Degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. OTHER AND/OR PREFERRED EDUCATION/EXPERIENCE: * Knowledgeable in Microsoft Word and Excel. * Knowledge in Entrata preferred. CERTIFICATES, LICENSES, REGISTRATIONS: * None JOB PERFORMANCE AND SUCCESS FACTOR REQUIREMENTS: (These are the quantitative and qualitative measures that this role will be evaluated and held accountable for). Cooperation, Influence, Teamwork & Business Relationships – 25% □ Collaboration & Teamwork – 20% □ Cooperation – 20% □ Customer Service – 20% □ Influence – 20% □ Internal/External Relationships – 20% Decision Making/Initiative – 25% □ Analytical & Problem Solving – 16.67% □ Decisive – 16.67% □ Practical Judgment – 16.67% □ Action-Oriented – 16.67% □ Confidence & Risk Taking – 16.67% □ Effort & Self Development – 16.67% Job Knowledge and/or Job Specific Skills – 25% □ Job Knowledge – 16.67% □ Multi-Tasking – 16.67% □ Reporting – 16.67% □ Work Quality– 16.67% □ Work Quantity – 16.67% □ Creativity & Productivity – 16.67% Professional/Technical/Communication Skills – 25% □ Ethics & Values – 14.29% □ Integrity – 14.29% □ Perseverance& Determination – 14.29% □ Reliability & Punctuality – 14.29% □ Time Management – 14.29% □ Approachability & Composure – 14.29% □ Verbal & Written Communication – 14.29% WORKING ENVIRONMENT AND PHYSICAL DEMANDS: Check (□) one or more of the following that best describes the environment and types of exposures of the job: X Office environment X Outdoors environment _ Mechanical facility X Changing weather conditions _ Toxic or caustic chemicals _ Odors or fumes _ Electrical current _ Loud machine/Equipment noise _Above ground level _ Confining spaces Physical Demands: Over 2/3 Time Between 1/3 and 2/3 Under 1/3 Walking X Sitting X Standing X Climb or balance X Lifting under 10 lbs. X Lifting over 10 lbs. X Reach with hands & arms X Stoop, kneel, crouch or crawl X Talk or hear X Travel Outside the area X SUPERVISORY RESPONSIBILITY: Does this job have supervisory responsibilities? No Powered by JazzHR pyySADs270

Job DescriptionDescription: Dasmen Residential is seeking to hire a full-time Property Manager. This position is fully accountable for all day-to-day property operations, overseeing and enhancing the value of the property. Property Manager must embrace the concepts of Level 5 Leadership, Group Responsibility and Servant Leadership. Reports To: Regional Property Manager. Duties & Responsibilities: • In conjunction with the RPM, the property manager will assist in the formulation of budgets for each upcoming calendar year. The property manager is responsible for staying within the established budget guidelines throughout the year., • Actively maintain and report monthly variances and narratives., • Ensure that all rents are collected when due, and posted in a timely manner. Make sure that all bank deposits are made immediately and deposits are reported to the corporate office on a daily basis., • Perform evictions, utility cut-offs and landlord liens as required on delinquent rents., • Constant vendor/contractor communications concerning work scheduling, billings, vendor relations and certificates of insurance. The property manager is responsible for approving and submitting all invoices to the corporate office for payment., • Hire, train, motivate and supervise all on-site staff in order to achieve operational goals of assigned community. This includes new employee orientation and training, ongoing formal and informal performance evaluation, review and approval of timesheets, and instructing and advising on-site staff of employee procedures and guidelines., • Provide comprehensive feedback to non-performing employees. Facilitate disciplinary procedures and documentation up to and including terminations of employment if necessary., • Report all liability and community incidents to the corporate office immediately. Ensure that all workers’ compensations claims are reported and proper paperwork is completed., • Ensure that lease files are complete and that completion of leases is being executed properly. Approve in writing all leases on the property., • Responsible for offices opening on schedule, the condition of the office and model apartment., • Maintain a positive customer service attitude., • Periodic inspection with resident move-ins/move-outs., • Review all notices to vacate to determine the cause of the move-out., • Physically walk and inspect community on a regular basis; check on vacant apartments., • Update board indicating vacancy status on a daily basis. Coordinate with maintenance and make-ready staff to ensure the timely cleaning of apartments after move-out., • Conduct market surveys monthly and provide trend report information. Shop competition and be aware of neighborhood market conditions., • Welcome and show community to prospective new residents. Also, handle incoming phone calls from prospective new residents and complete appropriate paperwork., • Maintain awareness of market/industry conditions and trends via trade publications, professional organizations, etc. Requirements: Qualifications: • Prefer 3 years experience in on-site property management; 2 as a property manager., • Must have a background in supervision and successful track record of accomplishments., • Computer Skills: Microsoft Office (Word, Excel, Outlook, etc.), proficiency with Yardi Voyager, able to learn new systems quickly and utilize them in daily work, • Work Hours: Full-time - salaried position. Must be available on weekends for staffing needs and emergencies., • Some financial/accounting experience preferred., • Frequent need (20% to 25% of the time) to utilize personal transportation to inspect apartment community and surrounding neighborhood, make trips to the bank, and visit the corporate office., • Occasional use of golf cart may be necessary., • Must have valid driver’s license, automobile insurance, and a clean driving record., • Competitive salary & high bonus potential, • Medical, Dental, Vision Insurance, • Generous vacation and sick leave policy, • Extensive Paid Holidays, • Employee recognition and awards, • Free life insurance, • Short term disability, • Company-wide events, • A work family you can always rely on, • Employee Mentorship program, • Reimbursement program for industry schooling, • Employee housing discount, • Awarded Best Places to Work by multiple organizations, • Associate referral bonus, • Paid maternal and paternal leave, • Ongoing training, • Internal growth opportunities

Job Description orm Tool Technology, Inc. has an opening for a CNC Precision Tool Cutter-Grinder. Job Description: Operate and maintain a state of the art ultra precision grinding cell producing parts to micro-tolerances Qualifications: • High School diploma or General education degree (GED), • 6+ months industry related experience and/or training; or equivalent combination of education or experience including but not limited to Tool Grinding, Machining, Computer Science or Design, • Hardware and software experience is preferred, • Must be comfortable navigating any Windows based computer program, • Must be able to communicate effectively with supervisor and co-workers, • Strong geometry knowledge is foundational. Must also be able to convert metric to inch and do decimal to fraction conversions and must be impeccable with decimal placement, • Must have a strong analytical trouble shooting ability, • Ability to multi-task in a fast paced manufacturing environment., • Good work ethics, attendance, transportation, hygiene and teamwork, • College degree (AS or BS) in related field (Machine Tool Technology, Computer Science, Mfg. Engineering Technology, etc), • Experience in using Walter Tool Studio, Anca ToolRoom, NUM, AutoCAD, and other precision inspection tools, • Familiarity with Zoller product lines, comparators and calipers, • Standing 90 percent of the day, some bending into the machinesCompany DescriptionForm Tool Technology, Inc is a privately owned business that specializes in the manufacturing and reconditioning of precision rotary cutting tools for various metal working industries for over 50 years. We pride ourselves on delivering high-quality products and exceptional service to our clients. Join our dynamic team and contribute to our mission of innovation and excellence.Form Tool Technology, Inc is a privately owned business that specializes in the manufacturing and reconditioning of precision rotary cutting tools for various metal working industries for over 50 years. We pride ourselves on delivering high-quality products and exceptional service to our clients. Join our dynamic team and contribute to our mission of innovation and excellence.

Job Description Delivery Merchandiser Driver (Class A-CDL) $50,000 - $55,000 / Year 401K – Medical – Dental- Vision & Life Enjoy a MINIMUM of (20) 4-day weekends per year AND PTO accrual day ONE Enjoy an incredible WORK/LIFE balance – HOME EVERY NIGHT POSITION PURPOSE Beverage South (GA/SC) is looking for a Delivery Merchandiser Driver (Class A-CDL) to join the Beverage South Family! This position will deliver our products to our local accounts Monday through Friday or Tuesday through Saturday and be home every night. If you are an experienced delivery driver with a Class A-CDL then please apply and have fun while you work with BEER. The Delivery Merchandiser Driver works under regular supervision Monday through Friday or Tuesday through Saturday, delivering product to licensed accounts on assigned routes. Duties include collection of payment and strict adherence to Beverage South and supplier quality assurance procedures. Essential Duties and Responsibilities: Adheres to all check-in/check-out policies and procedures. Assumes full responsibility for all products assigned to be delivered daily to include safeguards of same along with vehicles, and equipment from theft, abuse, or loss. Sign for load sheet and verify number of pallets. Review stop sheets daily and contact Delivery Supervisor or Distribution Manager regarding missing accounts. Drives truck to deliver all ordered products to daily assigned accounts. Honors all customer requests authorized by management. Stock and rotates all existing and delivered products on shelves and back stock. Sets up all promotional displays as assigned by specific salesperson. Adds and replaces all POS material as directed via daily hand held communication. Collects empty kegs and out-of-date products. Pick up product damaged by a Beverage South employee or is a manufacture defect. Collects payments for the delivery in checks or money order. Provides customer with invoice of transaction for product sold, notes all adjustments on the invoice, obtains signature of customer on the invoice and as a driver signs the invoice for verification before leaving the account. Completes daily check-in procedure and reconciliation. Completes daily deposit and verifies with computer totals. Reports market trends and competitive activity to supervisor and recommends response, if appropriate. Any time a truck is backed into a Beverage South dock the wheels must be chocked. Performs daily check equipment daily, including vehicle fluid levels, and reports any maintenance or performance problems. This includes cleaning the cab of trash and sweeping out the trailer daily. Operates Company vehicle according to Fleet Safety Manual to include reporting any and all (company and personal) vehicle accidents immediately to Delivery Supervisor and follow the Beverage South accident policy as outlined therein and additionally adheres to all DOT regulations. Performs other duties as determined by the Distribution Manager/Supervisor. Qualifications: Completion of Company training program. Possess in-depth knowledge of company products: every brand and package sold and benefits of each product; policies; procedures, and operations. Knowledge of State laws regarding the sale of alcohol. Possess grooming and hygiene practices consistent with maintaining good customer relations. Adapts well and is flexible with not having a daily routine. Education/Experience: High school degree or equivalent. Prefer 3-6 months commercial driving experience and prior route sales or delivery experience. Language Ability: Interpersonal skills to deal with customers effectively and in a professional, business-like manner. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions, and decimals. Basic understanding of completing and balancing a deposit with product sold. Reasoning Ability: Ability to understand the basic operation of handheld units and associated software. Certificates and Licenses: Class A CDL and DOT Medical Card. Supervisory Responsibilities: None Physical Demands: The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Heavy work. While performing the duties of this job, the employee will handle or feel; reach with hands and arms; talk and hear. Requires continuous standing, walking, bending, kneeling, climbing, routine and repetitive pushing/pulling 150-500 lbs., and lifting/carrying 26-50 pounds and occasionally up to 160 pounds. Individual must be physically capable of occasionally moving product into and out of customers’ establishments in large volumes in a relatively short period of time. Employee is exposed to outside weather conditions and deals with sudden temperature changes when entering and exiting refrigerated coolers. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus to read information on electronic devices and on paper, and to operate a motor vehicle. Continuous jostling from riding and driving a truck. Measures: Attendance Route reconciliation including long and shorts on cash and product. Rotation and Quality Assurance of all delivered and stocked product. Safety, related to all aspects of daily assigned responsibilities. Maintaining consistent professional customer relationships. Vehicle Inspections. Success Factors: Drive and energy Team work Honesty and Integrity Accountability and ownership Pride in the Beverage South product line Pride in your Job! Drug Free Workplace and Equal Employment Opportunity

Job DescriptionThe Manager in Training is responsible for creating a positive staff & member experience by providing a superior level of customer service to Planet Fitness employees, members, prospective members, and guests. Characteristics that will make you a perfect match for our Manager in Training position: You: • Exhibit a positive and upbeat attitude., • Have a passion for delivering a consistent and exceptional experience to employees, members, guests, and fellow PF team members., • Pride yourself on your work while being punctual, reliable, and dependable., • Handle all interactions with diplomacy and exhibit a genuine motivation for helping others., • Act with integrity and show respect to everyone around you., • Exhibit strong communication skills and have an ability to listen and empathize., • Inspire and motivate others to achieve their goals. As a Manager In Training, you will be responsible for leading your team, while providing a superior level of customer service to Planet Fitness members, prospective members and guests while ensuring an exceptional Judgement Free member experience! Daily responsibilities for the Manager In Training will also include: • Assists GM in creating staffing schedules with the assurance that all shifts are regularly covered., • Leads by example and maintain consistent accountability for direct reports by training and coaching staff members to provide exceptional customer service., • Leads a team through systems and operations to achieve common sales and membership goals., • Assists in preparation of all HR related forms in a timely manner., • Works with GM to resolve employee and member issues or concerns in a professional manner., • Assists GM in disciplinary/termination activities., • Provides 24/7 backup support for any employee who is absent and reachable by phone, • Upholds integrity and security of staff files and sensitive company documents., • Is a brand ambassador by leading a judgement free lifestyle., • Assists GM in the training and development of staff to include providing day to day coaching., • Assists GM in pre-screening, hiring, onboarding and recruiting., • Perform membership related functions such as sign-ups, contact/billing information updates, cancellations, collecting unpaid balances and transferring memberships., • Perform prospective member calls and tours; assessing their membership needs., • Delegate and oversee regular, consistent cleaning and sanitizing of restrooms, locker rooms, tanning areas, all exercise equipment, etc., • Frequently perform a comprehensive walk of all club areas; quickly fix any safety/policy issues and address cleanliness concerns., • Promptly address maintenance and facility concerns such as broken and/or missing equipment (i.e., Dispensers, leaky faucets, fixtures etc.), • Oversees the ordering of club supplies uses specific budget based on club requirements., • Tracks Key Performance Indicators such as signups, guest counts, cancels, info calls (daily, weekly, monthly, annually) etc., • Manages marketing efforts by ensuring that staff is aware and trained on all marketing promotions., • Assists in the completion of recorded info call inspections.Qualifications/Requirements:, • High school diploma or general education degree (GED), or one to three months related experience and/or training, or equivalent combination of education and experience., • Prior management or supervisor experience preferred., • Must be willing to become CPR/AED certified, • Must be available to oversee staff and operations of a 24 hour facility, • Must be willing to complete a background check, • Must be willing to occasionally travel for training and to support other locations., • Customer service background preferred., • Basic computer proficiency., • Superior problem-solving skills., • Exceptional leadership and diplomacy skills., • Must complete required ASM Reading List and PFU courses on Leadership., • A passion for fitness and health., • Upbeat and positive attitude!, • Punctuality and reliability is a must., • Exceptional customer service skills; able to interact in a positive and professional way with staff, members and co-workers, exceeding the members expectations., • Strong listener with the ability to empathize and problem solve., • Demonstrate diplomacy in all interactions while using appropriate behavior and language., • Must be 18 years of age or older.Physical Demands:, • Continual standing and walking during shift., • Continual talking in person or on the phone during shift., • Must be able to occasionally lift up to 50 lbs. We offer: • Career advancement opportunities, • Weekly pay with monthly bonus opportunities, • Black Card membership, employee perks, rewards, and discounts, • Paid breaks, • Paid time off, • 401(k) & Roth Retirement savings plan (with employer match), • Engaging team-building competitions, sales contests, and social eventsLev Management LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Lev Management, developing Columbia and the Midlands of South Carolina. Click for more info on our Midlands Area locations!

Job Description JOB TITLE: Sr. Controls Service Technician STATUS: Full Time, Non-Exempt (Eligible for overtime) DEPARTMENT: Service REPORTS TO: Service Manager or Operations Supervisor JOB SUMMARY: The Sr. Controls Service Technician perform preventive maintenance, troubleshooting, and repair of building automation systems and their components. As a Sr. Controls Service Technician you will provide analysis of building control and HVAC system performance in buildings; provide accurate and complete documentation in a timely manner; perform DDC controls startup/programming as required and cct as liaison to customer, and electrical installer. Employment at Will: Nothing herein is intended to create a contract of employment or to guarantee employment for a definite duration. SR. CONTROLS SERVICE TECHNICIAN DUTIES AND RESPONSIBILITIES: • Preventative Maintenance Tasking (Database Back-ups, Control System Analysis, Network Analysis and Optimization, Central Equipment Controls Performance Testing, Customer Training), • Execute Service Quoted Projects, • Troubleshoot DDC Control and Mechanical Systems when necessary, • Replace Failed Components as necessary, • Provide Consistent Communications (Supervisor, Service Coordinator, Account Managers, and Customer), • On call as scheduled SKILLS AND ABILITIES: • Knowledge of HVAC DDC Control Theory & Applications, • Proficient with Alerton, Distech, Delta, Niagara, or Tridium programming, • Experience with electronics and basic electrical circuits, • Strong troubleshooting skills, • Computer hardware and software skills, • Ability to work independently and unsupervised, • Strong communications and interactive skills CREDENTIALS AND EXPERIENCE: • AA degree in applied technology (preferred), • Equivalent combination of education and experience, • HVAC and/or Mechanical systems experience, • Computer programming experience, • Troubleshooting experience, • 5+ years of BACnet controls experience. This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Building Technologies, Inc. No phone calls or drop-ins please. EEO Employer/Vets/Disabled

Job Description Join the dynamic world of Mark Anthony Group, a spirited and innovative drinks company. We’re driven by our family-oriented principles and a pioneering spirit that started in 1972. Our journey includes renowned brands such as White Claw® Hard Seltzer, Mike’s Hard Lemonade, Cayman Jack and Más+ by Messi™. Purpose of the Role: As a Technical Maintenance Supervisor, you'll be at the helm of our maintenance team, ensuring efficient operations and fostering a culture of safety and quality. Collaborate with senior managers and technicians to achieve plant performance goals while you lead with initiative and integrity. • Reinforce a no-tolerance stance on safety hazards within the team., • Provide forefront leadership to the maintenance squad during shifts., • Deliver a standout maintenance agenda, covering predictive to reactive maintenance., • Promote interaction between quality, production, and warehouse leaders in repair processes., • Empower team members through personal development and skill-building., • Associates qualification or comparable expertise., • Proficiency in maintenance programs and reliability analysis tools., • Leadership skills that empower and inspire., • Adept in fast-paced collaborative work settings. Craft Masters: We set the gold standard across our undertakings and partnerships. Curiosity Champions: Embracing new challenges with an open mind. Humility Heroes: We celebrate wins and nurture camaraderie. Innovative Insurgents: Swift, strategic, and adaptive—our mantra against convention. Skills You Should Possess: • Advanced Mechanical Troubleshooting, • Voltage System Proficiency, • Skilled in Electrical Trouble shooting, • Expertise in Safety Evaluations

Job Description SUMMARY: The HVAC Service Technician serves customers by installing and servicing systems and products. This position fosters positive customer interactions by identifying system issues and completing repairs to the satisfaction of the customer and the company. ESSENTIAL DUTIES AND RESPONSIBILITIES:The requirements listed below are representative of the knowledge, skill, and/or ability, and physical demands required. • Serves existing accounts by analyzing service orders, planning daily travel schedules, investigating complaints, conducting tests and resolving problems., • Establishes service by studying system requirements, ordering and gathering components and parts, completing installation and performing acceptance tests., • Maintains rapport with customers by examining complaints, identifying solutions, suggesting improved methods and techniques and recommending system improvements., • Keeps personal equipment operating by following operating instructions, troubleshooting breakdowns, maintaining supplies, performing preventive maintenance and calling for repairs., • Documents service and installation actions by completing forms, reports, logs, and records., • Updates job knowledge by participating in educational opportunities and reading professional publications., • Completes required paperwork accurately and timely for Customer and Company., • Follows all safety restrictions required by Company, Customer, and OSHA., • Ability to understand wiring diagrams., • Performs all other duties as assigned. COMPETENCIES: • Job Knowledge- Includes awareness and possession or mastery of special facts, practices, manual skills and techniques and decision-making methods., • Time Management- Uses time effectively and efficiently. Values time. Concentrates efforts on the more important priorities. Gets more done in less time than others. Can attend to a broader range of activities., • Communication Oral- Speaks clearly and persuasively. Listens and gets clarification. Responds well to questions. Demonstrates group presentation skills. Participates in meetings., • Problem Solving- Solves difficult problems with effective solutions. QUALIFICATIONS: • Language Skills- Ability to read, analyze, and interpret sales/ticket orders and other documents in English. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to interact clearly and effectively, in both written and oral communication, with supervisor, customers, co-workers, vendors, etc., • Computer Skills- To perform this job successfully, an individual should be proficient in personal computer skills including electronic mail, record keeping, routine database activity, word processing, spreadsheet, etc. This role requires an intermediate level of knowledge of Microsoft Office. Other industry platforms are also utilized., • Other Qualifications- Valid in-state Driver’s License and clean driving record required. Carrier requirements are 21 years of age with a minimum of 2 years driving experience. Extensive travel is required with occasional overnight stays. PHYSICAL DEMANDS: While performing the duties of this job, the individual will be standing, climbing, balancing, stooping, kneeling, crouching and crawling 80 percent of the time. This individual will frequently move about inside tight and cramped spaces. This individual is frequently required to walk, use hands and fingers to reach, feel, grasp/manipulate and be able to reach with hands and arms. Specific vision abilities include the ability to see well up close and at a distance, the ability to distinguish, colors, good peripheral vision and depth perception, and the ability to adjust focus. The employee is regularly required to talk and hear. The employee must regularly lift and/or move up to 50 pounds, occasionally lift and/or move up to 100 pounds. The individual must be capable of reviewing their work for errors and making adjustments as necessary. The individual must be able to remain in a stationary position for 20 percent of the time while operating their computer and performing office work in their Company vehicle. They must be able to exchange accurate information with customers and others in the office while interacting. They may occasionally operate a computer and other office productivity machinery, such as a calculator, copy machine, fax machine, and computer. WORK ENVIRONMENT: This position requires working outdoors, in mechanical/equipment rooms and in possible extreme weather conditions. The employee is regularly exposed to moving mechanical parts and heavy equipment. The employee is frequently exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, outside weather conditions, risk of electrical shock (high voltage) and vibration. The employee is occasionally exposed to toxic or caustic chemicals, extreme cold and extreme heat. The noise level in the work environment is usually moderate to high depending on customer job sites. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization. #zr

Job Description Is AMERICAN the right fit for you? AMERICAN SpiralWeld Pipe Company is hiring for a Warehouse Supervisor at our East Coast Operation in Columbia, SC. At AMERICAN, we believe in doing things THE RIGHT WAY. That's why our employees earn competitive pay, receive excellent benefits and have opportunities to grow. All this while making products the world needs. We are seeking a hands-on Facility Warehouse Supervisor to lead daily warehouse operations at our facility. This role ensures safe, accurate, and efficient material handling and inventory control, supervises warehouse staff, executes facility-level MRO purchasing under divisional guidance, and partners closely with production and maintenance to maintain material availability. The ideal candidate is WMS/ERP proficient, safety-focused, and experienced in continuous improvement. Responsibilities include: Purchasing • Execute facility-level purchasing of MRO supplies and consumables under divisional guidance., • Track order status, deliveries, and vendor communications for local needs., • Supervise receiving, storage, picking, staging, and issuing of materials., • Maintain warehouse layout, housekeeping, and compliance with safety standards., • Maintain inventory accuracy through WMS use, cycle counts, and periodic audits., • Lead, train, and develop warehouse associates in standard operating procedures., • Assign daily tasks, monitor productivity, and provide performance feedback and coaching., • Identify and implement opportunities to improve warehouse processes and increase WMS utilization. 1. Must be physically able to perform the essential functions of the job, with or without reasonable accommodations., 2. Must be able to to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, employees, government, and industry representatives., 3. Must be able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., 4. Must be able to to calculate figures and amounts such as discounts, interest, proportions, and percentages; apply concepts of basic algebra., 5. Must be able to define problems, collect data, establish facts, and draw valid conclusions., 6. Must be able to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., 7. Must be able to use Microsoft Office Suite; Maintenance CMMS, and ERP System (Oracle/JD Edwards preferred)., 8. Must demonstrate strong leadership, communication, and organizational skills., 9. Must have experience in communication with all levels of employees in a manufacturing setting., 10. Must be able to work alone in a self-directed environment., 11. Must be able to establish and maintain effective relationships with those contacted in the scope of performing the essential functions and responsibilities of role., 12. Must be able to effectively perform multiple, concurrent tasks with constant interruptions. PREFERRED QUALIFICATIONS: 1. Knowledge of JD Edwards/CAM software, 2. Knowledge of MaintainX software ESSENTIAL PHYSICAL FUNCTIONS This role requires physical mobility in both warehouse and office settings, including lifting items up to 50 lbs. and operating or overseeing warehouse equipment. They must adapt to variable temperatures, noise, and dust in the warehouse and follow safety protocols. BENEFITS AMERICAN SpiralWeld Pipe Company provides competitive wages and benefits including: • Medical (PPO or HDHP options), • Prescription, • Teladoc, • Employee Assistance Program, • Dental, • Vision, • Basic Life Policy (Company Paid), • Short-Term Disability Policy (Company Paid), • Long-Term Disability Policy (Company Paid), • 401k

Job Description The Parts Clerk will maintain and control incoming parts and repairs in day-to-day operation, ensure proper inventory, and continue to improve the quality of services and deliveries provided by suppliers and OEM Position Functions • Maintain Maintenance Inventory Stock room - ensure proper inventory, • Manage EAM D7i system counts and rotation of the stock items, • Organize stock room and utilize proper square footage, • Prepare parts for projects and PM's, • Continually evaluate and improve stock availability, • Maintain proper level of the spare stock parts and supplies, • Provide supervisor with cost reductions on a weekly basis, • Generate monthly inventory report and other activities reports in stock room, • Must ensure compliance with all Fresh Express policies and procedures (Personal Safety, etc.) as required, • Perform other duties as assigned, • Perform parts sourcing and walk-down activities, • Perform receiving activities (opening boxes, checking packing slips, and noting discrepancies), • Labeling inventories and storage locations Physical Requirements: the employee is required to stand for extended periods of time (duration of the shift, 8 hours or more); walk; reach with hands and arms; climb or balance; stoop; kneel; crouch; bend continuously; or crawl. The incumbent must be able to climb stairs and ladders or step up onto a platform several times throughout the shift; and is occasionally required to sit. The employee must be able to push/pull/lift and/or move 50 pounds. Work Environment: The employee is occasionally exposed to wet/cold conditions of 34 36 degrees and also at times hot conditions. The noise level in the work environment is usually moderate to occasionally loud, which may require hearing protection. • Computer skills MS Office (Excel and Access), • Negotiation skills, • Basic business requirements such as attendance, punctuality, and good work ethics, • Mechanical knowledge and basic math skills required, • Must be fluent in English: oral and written, • Must be able to occasionally work in a cold/wet environment of approximately 34 degrees Fahrenheit, • Familiarity with SQL, • Previous experience with EAM (version D7i), • Working knowledge of AS400 and/or Oracle, • One-year inventory experience The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed, as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Job Posted by ApplicantPro

Job Description UNITED CEREBRAL PALSY OF SOUTH CAROLINA, INC. POSITION DESCRIPTION JOB TITLE: Community Living Manager Division: Residential SUPERVISOR: Associate Managing Director FLSA STATUS: Non exempt JOB SUMMARY: Provide overall management of the day-to-day operation of supported independent living residential services. Position requires on-call support via cell phone for staffing issues/conflicts related to scheduling and must have reliable transportation. EDUCATION OR TRAINING REQUIREMENT: High School diploma or equivalent. Associates degree preferred. EXPERIENCE REQUIREMENT: Minimum 2 years’ experience working with individuals with disabilities and/or related field; 1 year of supervisory experience minimum. SPECIAL LICENSES, REGISTRATION OR CERTIFICATION: South Carolina driver’s license and vehicle insurance; must have ability to utilize Microsoft Office Suite (Word, Excel, Power Point, Outlook, etc.). Bachelor’s Degree preferred SUPERVISORY RESPONSIBILITY: Supervises direct support professionals for the assigned residence. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: I. Administration : A. Ensures daily operation of residential sites is in compliance with the policies of UCP and DDSN and provide quality care, oversight and support to individuals served. B. Creates weekly house schedule to ensure the daily activities and needs of individuals served are met and secures coverage for any shift during absences and vacations based on the rates of each home. C. Ensure all home/agency operations systems are working properly, to include: van cell, cable, computer, fax, security system and phone. D. Provides direct support to individuals living in residential and supported living. E. Investigate and resolve any issues of misuse of agency equipment or theft of finances, to include credit cards, house petty cash and Cash on Hand. F. Monitor and ensure compliance in all aspects of agency vehicle, to include: registration, insurance, repairs, regular maintenance, vehicle accidents and van log usage. G. Reports any emergency/crisis situation to supervisor and follows up by completing appropriate incident report as well as reports to SLED any violations of individual rights, abuse, neglect or exploitation within 24 hours. H. Works cooperatively with all contract providers, vendors, and agency staff, meets routinely with Area Director. I. Monitors and ensures all daily household cleaning chores are completed. Home is comfortable, safe and free from hazards. J. Attends Quarterly Psychotropic Medication Review at least quarterly or as needed. K. Collaborates with individuals served to create a weekly menu. Ensures that groceries and house supplies are purchased weekly in accordance with the menu and there is ample product/choice for individuals served. L. Provides on-call support to staff regarding house scheduling/leave issues and safety or operational issues. II. Staff Development: A. Screens and interviews staff in respect to the needs of the clients served. Assists HR with obtaining necessary information and ensuring completion of new-hire training for staff with AD or designee. B. Collaborates with Community Mentor to ensure staff receive training to reach optimum potential in the field. C. Ensures that all staff complete required training including: CPR, CPI, First Aid, and mediation administration. D. Attends all in-services and trainings, as necessary. E. Conducts CLC house meetings to ensure on-going skill development and compliance/understanding of all policy and procedures, at least monthly. F. Provides direct supervision of all Community Living Coaches to include evaluations, coaching’s and required annual trainings, with approval of AD or designee. G. Provides quarterly wheelchair tie-down and van safety training to all staff. H. Attends annual Residential Plan meeting and ensures staff follow all guidelines in the plan. III. Responsibilities Relating to Health and Safety: A. Inspects home at beginning of shift to ensure that home meets all safety requirements, checking for clutter and dangerous objects. Correct hazard/deficiencies or completes a Maintenance/Operation Work order or submits written report to supervisor outlining deficiencies by end of shift. B. Uses appropriate body mechanics to lift, move and position individuals in residential and supported living. Also provides guidance for exercise and physical care for the individuals served. C. Conducts evacuation drills, both fire (quarterly for CTH-II and annually for SLP/CTH-I) and severe weather (annually). Records results of each drill and corrects any findings. D. Conducts monthly inspections of all safety equipment, to include: first aid kits, smoke detectors, emergency lights, emergency food supplies, flashlights, carbon monoxide detector and security system. Ensure emergency phone numbers are posted by any phone. E. Follow program plan for meeting all potential emergencies and disasters, such as medical, fire, severe weather and missing persons. Report any occurrence to Area Director. F. Notifies Medical Service Coord/Area Director of all medical emergencies as outlined by policies and procedures. G. Checks to ensure that all flammable materials or household supplies are clearly labeled, properly stored and safeguarded. H. Checks to ensure that food is protected from contamination and spoilage. Checks freezer and refrigerator to ensure that food is properly dated, wrapped and/or covered. Corrects any problem and reports to AD for further corrective action. I. Checks to ensure all appliances, exhaust hood utensils and cooking/work surfaces are in good working condition. Complete Work Order to correct any issue. J. Ensures the appropriate disposal of garbage, daily sanitizing of trash containers and lids, hauling off of unnecessary items to prevent hazard within or around the home. K. Checks plasticware, chinaware, glassware or other similar items for ships or cracks. Places in a box to be picked up and removed from inventory in accordance with policy/procedure of UCP Residential Services. IV. Record Keeping Responsibilities: A. Monitors expenditures on a routine basis, dependent on the individuals’ needs, to ensure funds are properly planned for, managed and accounted for on the Consumer Statement of Account, in accordance with licensing standards and UCP policy/procedure. B. Ensures all client choices are provided and personal belongings are kept safe and available as well as logged completely on Personal Property Inventories as required by DDSN standards. C. Reviews quarterly CFA statements with the individual and/or family/legal guardian, obtaining signatures from all necessary parties per DDSN standards. D. Monitors and maintains all house petty cash, receipts and monthly reconciliations while staying within the approved annual budget. E. Ensures menus are posted on a weekly basis, in accordance with client preferences and within guidelines of any dietary restrictions. F. All Credit card purchases are logged, documented and monitored to ensure limits are within house budget. Distributions are turned in monthly and discrepancies are investigated and findings submitted to AD. G. Maintains records in the home to meet local, state and federal guidelines. H. Makes client related entries in daily logs that are legible, dated, authenticated by signature and positions, in ink and without use of symbols or abbreviations. I. Records contacts with client’s family or guardian. J. Maintains appropriate documentation relating to health, safety and infection control. K. Maintains records of van log data sheets and monitors to ensure they are completed correctly by all staff. V. Compliance: A. Complies with the organization policies and procedures governing the use of behavior management programs for controlling maladaptive or problem behavior. B. Complies with policies/procedures to ensure that confidentiality requirements are upheld. C. Supports and protects the fundamental human, civil, constitutional and statutory rights of clients and families as defined by agency. D. Demonstrates competence in handling medical emergencies in accordance with UCP policies and procedures. E. Reports to work promptly and on time and does not leave work until assigned shift ends or has approval from supervisor. Observes policies/procedures governing requests for annual, sick or other leave time. F. Observes all other personnel policies and works closely with supervisor to ensure compliance. G. Abides by code of ethics and serves as a good role model for clients. H. Ensures services provided are in compliance with local, state/federal rules and regulations and UCP Residential Services in the area of supervision/accountability for each client served and documented. I. Administers medications in accordance with all Medication Technician Certification. VI. Other: A. Develop and maintain positive and productive relationship with individuals served, families, co-workers, and community members. B. Maintain objectivity in position in order to set appropriate limits while working within the residential and supported living settings. C. Support individuals in their personal growth and development, respecting cultural, ethnic, spiritual, and individual differences. D. Obtains annual Tb test and ensures results are signed by appropriate medical staff. E. Other duties as assigned. F. Must be able to lift at least 50lbs. United Cerebral Palsy provides direct care services to convalescing and disabled clients. In addition to the job duties listed above, please advise regarding the following essential functions of a Community Living Liaison: VI. Other: A. Physical Description: B. ____Lifting C. ____Transferring D. ____Walking E. ____Standing F. ____Stooping G. ____Bending H. ____Running I. ____Lifting Overhead J. ____Driving/Transportation

Job Description Stoa Group is seeking a full-time Senior Community Manager to join our team in Columbia, SC! Stoa Group is recognized as National Apartment Association (NAA) Top Employers; we pride ourselves on having a great company culture where we put our employees first. Our Community Managers are smart, savvy team leaders with a passion for customer service and strong business acumen. They are accountable for all aspects of their property's operations, including financial performance, resident satisfaction and retention, and developing an engaged and productive team. They monitor a wide array of performance metrics, implement strategies to meet operational and leasing goals, analyze and respond to changing market conditions, and identify areas for improvement. As a Community Manager, you will direct sales activities, leasing administration, and maintenance initiatives at your property, exemplifying Stoa's Residential's brand - Service, Lifestyle, Excellence - each and every day by thinking like an owner and ensuring that your team members have the resources they need to be successful. WHO YOU ARE • A Leader. You will provide leadership and mentoring to your team, promoting a positive work environment that encourages collaboration and teamwork., • A Strong Communicator. Your writing and speaking skills are clear and effective, helping you connect well with others., • A Team Player. You are united with teammates in delivering the best experience to current and prospective residents., • Organized and Accountable. You have exceptional time management abilities and are able to juggle the needs of changing priorities in the community while accomplishing objectives through training and motivating a high-performing team., • Creative. You are an idea person and like coming up with smart solutions to new challenges., • Levelheaded. You keep your cool during stressful situations and quickly find solutions., • Flexible and Adaptable. You understand that the world does not exist through black-and-white lenses and embrace the opportunity to live in the gray., • Confident and Decisive. You take initiative, trust your gut, and are not afraid to make a decision or deliver a difficult message., • Motivated. You invest extra energy to reach your goals and help your team reach theirs., • Build community and industry knowledge by identifying trends to prepare for future occupancy needs and offering recommendations and training., • Connect people to the community through effective leasing administration and training of your team., • Show off our community by prioritizing curb appeal and maintaining accurate and in-depth knowledge of all aspects of the property and market., • Manage the leasing process by guiding the team through effective sales strategies and follow-through., • Support maintenance operations by partnering with your Maintenance Supervisor to provide a sparkling product through preventive maintenance, timely and efficient repairs, and a highly organized make-ready process., • Orchestrate all accounting functions associated with the property, including processing invoices, paying bills, assisting with collections evictions, and managing resident accounts and charges., • Train and collaborate with talented teammates to identify and solve any issues that arise., • Drive the community to continued operational success by proposing income-producing opportunities such as competitive pricing and value-add community enhancements., • Minimum 4 years of residential property management experience with working knowledge of tenant and eviction laws, Fair Housing, ADA, Fair Credit Reporting Act, OSHA, EPA, and all other Federal, State, and Local laws pertaining to Multifamily Housing, • Experience leading a high-performing team, • Familiarity and comfort with performance metrics, sales quotas, and financial concepts, • Demonstrated proficiency in working with computers, including word processing, calendar management, software/database, OneSite experience is highly preferred., • Excellent communication, interpersonal, and organizational skills, • High school diploma or equivalent, • College degree or related coursework in business, accounting, hospitality, or property management, • Demonstrated ability to secure leases and exceed sales goals, • Bi-lingual abilities (written and verbal) may be required based on the specific needs of the property. Stoa was established in 2017 to construct large-scale multifamily developments throughout the Gulf Coast. We are headquartered in Hammond, LA. Stoa Group develops meaningful relationships and extraordinary communities throughout Louisiana and beyond. We are a values-driven organization that views all employees as our greatest asset. At Stoa Group, we recognize the importance of investing in our employees and putting our people first. When we hire, we look for people who exemplify our core values and contribute positive energy to our culture. Stoa Group empowers our people through an employee-driven culture that delivers more than baseline benefits: • Competitive Salaries + commissions, • Retirement Plan with matching, • Paid Time Off and paid holidays, • 100% Employer-paid Health Insurance for employees, • Dental & Vision Insurance, • Employee Rental Discount

Job DescriptionThe General Manager is responsible for creating a positive staff & member experience by providing a superior level of customer service to Planet Fitness employees, members, prospective members, and guests. Characteristics that will make you a perfect match for our General Manager position: You: • Exhibit a positive and upbeat attitude., • Have a passion for delivering a consistent and exceptional experience to employees, members, guests, and fellow PF team members., • Pride yourself on your work while being punctual, reliable, and dependable., • Handle all interactions with diplomacy and exhibit a genuine motivation for helping others., • Act with integrity and show respect to everyone around you., • Exhibit strong communication skills and have an ability to listen and empathize., • Inspire and motivate others to achieve their goals. As General Manager, you will be responsible for leading your team, while providing a superior level of customer service to Planet Fitness members, prospective members and guests while ensuring an exceptional Judgement Free member experience! Daily responsibilities for the General Manager will also include: • Oversees staffing schedules with the assurance that all shifts are regularly covered., • Leads by example and maintain consistent accountability for direct reports by training and coaching staff members to provide exceptional customer service., • Leads a team through systems and operations to achieve common sales and membership goals., • Assists in preparation of all HR related forms in a timely manner., • Resolves employee and member issues or concerns in a professional manner., • Provides 24/7 backup support for any employee who is absent and reachable by phone, • Is a brand ambassador by leading a judgement free lifestyle., • Participates in the training and development of staff to include providing day to day coaching., • Oversees pre-screening, hiring, onboarding and recruiting., • Perform membership related functions such as sign-ups, contact/billing information updates, cancellations, collecting unpaid balances and transferring memberships., • Perform prospective member calls and tours; assessing their membership needs., • Delegate and oversee regular, consistent cleaning and sanitizing of restrooms, locker rooms, tanning areas, all exercise equipment, etc., • Frequently perform a comprehensive walk of all club areas; quickly fix any safety/policy issues and address cleanliness concerns., • Promptly address maintenance and facility concerns such as broken and/or missing equipment (i.e., Dispensers, leaky faucets, fixtures etc.), • Oversees the ordering of club supplies uses specific budget based on club requirements., • Tracks Key Performance Indicators such as signups, guest counts, cancels, info calls (daily, weekly, monthly, annually) etc., • Manages marketing efforts by ensuring that staff is aware and trained on all marketing promotions., • Assists in the completion of recorded info call inspections.Qualifications/Requirements:, • High school diploma or general education degree (GED), or one to three months related experience and/or training, or equivalent combination of education and experience., • Prior management or supervisor experience preferred., • Must be willing to become CPR/AED certified, • Must be available to oversee staff and operations of a 24 hour facility, • Must be willing to complete a background check, • Must be willing to occasionally travel for training and to support other locations., • Customer service background preferred., • Basic computer proficiency., • Superior problem-solving skills., • Exceptional leadership and diplomacy skills., • Must complete required ASM Reading List and PFU courses on Leadership., • A passion for fitness and health., • Upbeat and positive attitude!, • Punctuality and reliability is a must., • Exceptional customer service skills; able to interact in a positive and professional way with staff, members and co-workers, exceeding the members expectations., • Strong listener with the ability to empathize and problem solve., • Demonstrate diplomacy in all interactions while using appropriate behavior and language., • Must be 18 years of age or older.Physical Demands:, • Continual standing and walking during shift., • Continual talking in person or on the phone during shift., • Must be able to occasionally lift up to 50 lbs. We offer: • Career advancement opportunities, • Weekly pay with monthly bonus opportunities, • Black Card membership, employee perks, rewards, and discounts, • Paid breaks, • Paid time off, • 401(k) & Roth Retirement savings plan (with employer match), • Engaging team-building competitions, sales contests, and social eventsLev Management LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Lev Management, developing Columbia and the Midlands of South Carolina. Click for more info on our Midlands Area locations!

Job DescriptionDescription: PURPOSE OF THE POSITION Contour is hiring an experienced field mechanic with diagnostic and troubleshooting skills for multiple brands including Caterpillar and Komatsu. The Ideal Candidate has experience with Crushing Equipment as well as Tractor/Trailer and Light Vehicle experience. RESPONSIBILITIES At all times, display a high degree of professionalism. Must be able to perform diagnostics and repairs in a timely manner. This position will require the technician to have and maintain a clean driving record, free of any major infractions to operate company vehicles for their daily duties as it will require the candidate to drive to various locations to perform duties at the respective job sites when not working in a shop environment. KNOWLEDGE, SKILLS AND ABILITIES Knowledge and Skills The incumbent must have proficient knowledge in the following areas or be willing to learn: • Must have experience with diagnostic tools and on-board systems., • Must have experience with Caterpillar and Komatsu products., • Must have welding experience., • Ability to read and understand operation and service manuals, system schematics and technical drawings., • Ability to research and request parts as necessary for the jobs at hand., • Perform required repairs to systems such as, Engines, Transmissions, Final Drives, Brakes, Hydraulics, Pneumatics and Electrical Systems., • Operate and test equipment after repair or assembly to ensure proper performance and compliance to prevent re-work from occurring., • Record and report usage of all components, parts, consumables, and other resources on their daily paperwork turned into their immediate supervisor., • Aid as necessary to the Contour, Carolina Wrecking, Carolina Concrete operations personnel with regards to G.E.T. removal and installation as well as other duties as required. The incumbent must demonstrate the following personal attributes: • Strong Organizational skills, • Be honest and trustworthy, and respectful., • Able to communicate effectively., • Possess cultural awareness and sensitivity., • Be willing to work flexible hours as needed by the business, • 5 yr Light/Heavy Equipment Maintenance work experience, • Pre-employment background check, drug/alcohol screen and physical, • Random Drug Screenings, • Clean MVR, as stated by our insurance company, • No more than 3 MV in a 3 yr period, • CDL required, • Positive attitude, • Paperwork completed neatly and on time, • Team Player willing to share experience and knowledgeRequirements:

Job Description At Miller Valentine, our culture is anchored in high-performance and high-values, and serves as the foundation for every position within our organization. With our core values as our guiding light, each team member not only adopts these principles but lives them out collaboratively, contributing to an environment where we work together to achieve outcomes and build certainty. • We are open and HONEST. Our relationships are built on trust and thrive on communication., • We hold ourselves and each other ACCOUNTABLE; united by our commitment to the team and to the customer., • We are people on the front lines, ensuring the SAFETY of our teammates and the success of every project., • We are building a place where ideas are born; diversity is celebrated, and CONTINUOUS IMPROVEMENT is the only path., • We are PASSIONATE. About our work. About having fun. And about becoming a better, smarter, stronger version of ourselves. PURPOSE: Assist in the overall administrative and technical direction of one or more projects. Will have responsibility for specific portions of a construction project on a day-to-day basis by assisting the Superintendent in execution of projects with overview and guidance by their Supervisor. In addition, assist the project team in the pursuit of new projects, project design, and estimate/scope preparation. RESPONSIBILITIES: • Assist in strategy sessions for projects, offering insights and aiding in strategic planning processes., • Create conceptual designs using AutoCAD to visualize project concepts and requirements effectively., • Support in creating estimates, conducting quantity takeoffs, bid solicitations, and comparisons for informed decision-making., • Aid in establishing and maintaining project schedules using Microsoft Project for efficient time management., • Assist in generating and managing billings, cost projections, contracts, and purchase orders in Viewpoint for financial accuracy., • Collaborate on scope change estimates and assist in developing bid forms, scopes of work, specifications, and subcontracts., • Participate in shop drawing review, submittal tracking in Procore, and RFI generation for streamlined project processes., • Maintain project files, drawings, and documentation to ensure organizational efficiency and accessibility., • Support in managing design and project issues to resolution, ensuring project continuity., • Help create meeting notes and agendas, facilitating effective communication within the project team., • Assist the Project Team with project execution tasks to meet project milestones effectively., • Support in coordinating and facilitating subcontractor project meetings for collaboration and progress., • Maintain regular communication with various project stakeholders on a day-to-day basis to address project-related issues., • Aid in creating Operation and Maintenance (O&M) manuals and As-Built drawings for comprehensive project documentation., • Assist in optimizing the project team's time allocation and contribute to identifying cost-saving opportunities and process improvements., • Manage multiple projects simultaneously, assisting in project coordination and task prioritization., • Develop verbal and written communication skills while understanding their proper application in project-related contexts., • Support in enforcing safety protocols on all projects to maintain a secure working environment for all involved parties., • The job description outlines primary responsibilities but does not limit additional duties that may be assigned by authorized personnel. All tasks are essential functions subject to modification for accommodation purposes. CORE COMPETENCIES: Experience Proficiency Performance Accountability Professional position meeting education or equivalent experience qualifications. Capable of training and advising others. Quickly grasps new systems, processes, or market sectors; communicates effectively with diverse teams; trains and supports colleagues. Performance exceeding expectations in a level I position for at least 12 months for promotion eligibility Individual Contributor w/Training and Advisory expectations QUALIFICATIONS & EXPERIENCE: • Requires a 4-year degree in Engineering, Construction, or Architecture from an accredited College or University or equivalent experience. Other related degrees accepted if supported by construction-oriented coursework or relevant experience., • Proficient knowledge of Excel, Word, Microsoft Project, AutoCAD, as well as estimating and project management utilizing cost accounting software (Viewpoint preferred) and Procore., • Capable of training and advising others effectively., • Quick to grasp new systems, processes, or market sectors., • Demonstrates effective communication skills with diverse teams., • Able to train and support colleagues efficiently., • Individual Contributor with Training and Advisory responsibilities., • Ability to comprehend and communicate effectively with diverse audiences through various mediums, including written reports, business correspondence, and presentations., • Proficiency in numerical calculations, including discounts, percentages, and basic algebraic concepts., • Capacity to analyze problems, gather data, and make informed decisions based on factual evidence, while also interpreting technical instructions.