Maintenance jobs in San Diego, California - Page 3Create job alerts

Job Description General Summary Provide support for daily branch operations, i.e. make deliveries, pull orders, and put away stock. Essential Job Functions 1. Have and maintain a valid driver’s license, 2. Make deliveries to and pick-ups from customers, other branches/warehouses, and vendors/suppliers, 3. Pull orders for customers, 4. Load and unload shipments/deliveries using proper equipment, 5. Perform pre-trip and post-trip vehicle inspections and maintenance functions according to DOT regulations., 6. Comply with all federal, state and company requirements pertaining to motor vehicle laws and accident reporting., 7. Keep up daily trip logs, pre and post inspection reports, monthly fuel reports, 8. Prepare product for shipment via UPS, FedEx and common carrier, 9. Receive shipments from UPS, FedEx and common carrier, 10. Handle and process paperwork on damaged product., 11. Prepare Returns and Reclaims for shipment including appropriate paperwork, 12. Break down and put away stock using proper equipment, 13. Greet customers promptly and courteously by name (if known), 14. Answer telephones promptly and courteously identifying yourself and the company Other Job Functions 1. Assist at counter as needed, 2. Assist in maintaining a clean and safe work environment inside and out; i.e., empty trash, sweep floors, clean bathroom(s), etc., 3. Perform related jobs as required Skills and Physical Abilities . Meet the following physical requirements · All DOT medical and drug-free requirements · Ability to carry at least 75 pounds · Lift boxes up to 3.6 cubic feet/105 lbs (4-5 hours daily) · Sit in, get into/out of vehicle cab (2-3 hours daily) · Steer and drive vehicle (also shift a standard transmission) (as required) · Ability to climb ladders . Ability to use computer system as pertains to the job . Ability to get along with customers and other employees, follow directions and work under pressure Equipment 1. Forklift Education/Knowledge 1. Geography of the area Licenses Required 1. Commercial Driver’s License (CDL) with hazmat endorsement Work Environment 1. Overtime required during off-season and mandatory during season and inventory, 2. Heated store area, 3. Unheated warehouse area

Title Shipfitter About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Shipfitter Reports to: Structural Superintendent PAY RANGE: $25 - $34 per hour (DOE) Responsible for the use of various tools and equipment in the fabrication, assembly, and erection of steel structure. This position includes drawing reading, steel structure removal shipboard and reinstall. The position requires a working knowledge of technical to include 1689 and 1688. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Ensure work is done safely and meets quality standards., • Must have own basic skill related tools and equipment if not supplied by the workplace., • Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames., • Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools., • Locate and mark reference lines, such as center, buttock, and frame lines., • Position parts in hull of ship., • Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls., • Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding., • Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips., • May prepare molds and templates for fabrication of nonstandard parts., • May tack weld clips and brackets in place prior to permanent welding., • May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines., • Ensure work is done safely and meets quality standards., • Assemble items as instructed by floor supervisor., • Keep work areas clean and organized and take proper care of all equipment and facilities., • Follow all company rules and policies., • Provide a great level of attention to detail and focus on the given task., • Work with team members to maximize productivity and efficiency., • Prepare product for shipment., • Report any unsafe work conditions or practice to supervisor., • Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals., • Familiarity with the metric system, • Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents., • Ability to stand continuously for long periods of time., • Ability to identify and measure material., • Ability to follow instructions given both verbally and in written form., • Willingness to learn and work to the best of his/her abilities as well as dependable work ethic., • Knowledge of machines and tools, including their designs and uses., • High school graduate, or GED preferred., • Six months to one-year related experience and/or training, • Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime., • Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions., • Work over extended periods of time in tightly configured confined spaces., • May be made to enable qualified individuals with disabilities to perform essential job functions. Location California Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications. Apply Now

Job Description The Shipper/Packer will help ensure sufficient inventory levels while reducing losses and inefficiencies. A Shipper/Packer will perform the below duties in accordance with ASRC Federal ISO certified processes under direct guidance ASRC Federal Site Management personnel and others as assigned. Location: Naval Air Station (NAS) North Island, San Diego, California Schedule: Monday-Friday, 5:30am-2:00pm Hourly Rate: $21.19 Health & Welfare: $4.98/hr (as required by the SCA for the sole purpose of purchasing benefits.) Primary Duties and Responsibilities • Will perform Kind, Count and Condition (KCC) validation while processing receipts. Will segregate, stage and deliver bench stock material from Central staging area to designated depot shop., • Places bench stock material into bins or other storage locations as designated by site management., • Perform a Visual check inventory of all assigned bin locations daily and scan bins at or below the reorder point listed on the bin label., • Makes entries into computer via keyboard and scanners., • Apply bar code labels to bins as required., • IMS IV will be expected to quickly route customer concerns to site management for resolution., • 3-5 years of customer service experience., • Previous experience in customer service, inventory, shipping/receiving or administration is preferred., • Ability to obtain SECRET clearance., • Daily requirement to lift a minimum of 40 pounds., • Requires individual to stand or walk for extended periods of time., • May be required to operate material handling equipment such as pallet jack, delivery cart, etc., on a daily basis., • Must understand and read basic instructions., • May be required to wear hearing protection, safety goggles. Must wear OSHA approved safety shoes., • Must be energetic and confident with sound practical judgement and good communications skills., • Prior DOD bench stock experience highly desirable., • High school diploma or equivalent, • Access to Medical, Dental, Vision, STD & Life Insurance, • Access to 401k, • Paid Time Off, • Sick Leave, • Paid Federal Holidays, • Retention Bonuses Monday-Friday, 5:30am-2:00pm

Job Description Location: San Diego, CA ( Sorrento Valley) Job Type: Full-time Salary: $18-$22 per hour About Us: We are a full-service staffing agency committed to finding the perfect candidates for our clients. Our client, a prominent event company, is seeking a dedicated Event Inventory/Maintenance Associate who is ready to work hard and grow within the company. Are you a hard worker looking for longevity within a company? If you’re comfortable using hand tools and ready for a physically demanding role, we want to hear from you! Job Description: This position focuses on inventory and quality control, ensuring that event supplies are organized, functioning, and ready for action. Key responsibilities include: • Following a checklist to inventory and organize event supplies, • Counting items and preparing them for loading onto trucks, • Testing games by playing them to check for quality and functionality, • Covering games with blankets and shrink wrap to prevent damage during transport, • Assembling and disassembling rides using small hand tools, • Cleaning equipment, such as inflatables, and pulling items for delivery, • Loading and unloading trucks while efficiently arranging inventory in the facility, • Moving inventory around the warehouse, • Covering and protecting items for transport, • Collaborating with team members to lift heavy equipment (up to 100 lbs) as a team, • Valid driver’s license and reliable transportation, • Ability to follow directions and work independently, • Strong attention to detail for quality control tasks, • Comfortable lifting heavy items and performing physical tasks We have a remarkably high success rate in placing the right person in the right job. What’s our secret? We go out of our way to make personal connections to find the right staff right now. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Arbitration is a condition of employmentGo-Staff, Inc. is a family owned and operated full-service staffing company serving all of Southern California. We excel at placing job seekers in positions that are right for them, and we help employers in a wide variety of fields find talented employees that meet their needs.\r\n\r\nWe have a remarkably high success rate in placing the right person in the right job. What’s our secret? We go out of our way to make personal connections to find the right staff right now.\r\n\r\nWe are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.\r\n\r\nArbitration is a condition of employment

Job Description Pay Range: $18-$20 hourly Financial Opportunities: • At 12 months in role, earn an additional $.50 per hour by gaining your first certification, • At an additional 6 months in role, earn an additional $.50 per hour by gaining your second certification, • Ask me how you can make an additional $1 per hour by learning how to load/unload our stingers, • Company-paid medical insurance, • Dental & vision insurance available at a low cost, • 401K with company match, • 104 hours of PTO in the first year RESPONSIBILITIES • Use handheld scanning equipment to log vehicle locations and troubleshoot inventory location, • Accurately receive, organize, locate, and stage inventory vehicles on-lot consistent with processing and safety standards, • Multi-point inspections of inventory vehicles and accurately complete inspection reports, • Consistently meet processing and quality standards, • Maintain lot and workspace areas, • Safely operate company-owned vehicles, • High School Diploma or equivalent., • At least 18 years of age and a valid driver's license with a clean driving record, • Ability to operate a computer and company issued tablet and mobile devices, • Ability to work as a team player and interact with customers, managers and coworkers in a professional and courteous manner, • Ability to frequently and safely operate automatic and manual transmission vehicles, • Capable of walking 5 to 10 miles per shift, • Ability to work outdoors in various weather conditions such as rain, snow, heat, etc., • Frequently getting in and out of vehicles., • Bend, twist, stoop, squat, and stand Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Summary A top hospital system and healthcare provider on the West Coast is seeking a Service Center Representative to support the Medicare and Special Projects team. This is a detail‑heavy, fast‑paced role that requires strong critical thinking, attention to detail, computer proficiency, and the ability to make independent decisions. This position supports health plan enrollment through heavy data entry (approximately 80%) and outbound phone calls (approximately 20%). Key Responsibilities The Service Center Representative will support account maintenance, billing, reconciliation, reporting, and customer service related activities, including but not limited to: • Perform high‑volume data entry to support health plan enrollment and member maintenance, • Maintain and update member records, including enrollments, corrections, retroactive adjustments, and terminations, • Identify, research, and reconcile billing and payment discrepancies to ensure accurate eligibility, revenue, and membership records, • Support eligibility inquiries and ensure billing accuracy and timely distribution, • Interact with purchaser benefit administrators to explain health plan policies and contractual provisions, • Resolve membership and billing‑related issues with internal teams, purchasers, and sales/service representatives, • Assist with sales process support and membership accounting issue resolution, • Resolve payment delinquencies and discrepancies, • Identify, code, batch, scan, and index documents into the imaging system, • Provide general office support (mail handling, filing, document retrieval, supply ordering, and copier maintenance), • Work with internal and external customers and vendors to resolve support service issues, • Track productivity and customer service quality metrics, • Participate in team‑based projects and operational improvement initiatives, • Assist with training as required, • Coordinate and facilitate communication across departments and lines of business, • Participate in purchaser performance evaluations and target‑setting activities, • Perform additional duties as assigned Onsite / Remote Details • This role starts onsite for a minimum of 6 weeks of training, • After training, there is an opportunity to transition to fully remote work, pending performance, • Candidates must live within 1 hour of the 92108 zip code and be willing to commute onsite if equipment issues arise, • This is not a hybrid role, though full‑time onsite work is available if preferred Schedule • Monday–Friday, 8:00 AM – 5:00 PM PT, • Breaks included, • No time off permitted during the 7‑week training period or during holidays, • Missing time during training or restricted periods may result in termination Assessment Requirement • All candidates must complete and pass a pre‑employment assessment, • High scores are required in Data Entry, Learning Potential, and Thoroughness, • Assessment duration: 50–75 minutes, • Candidates should plan accordingly and consult with their recruiter for preparation tips Important Notes • This is one of the top hospital systems and healthcare employers in the United States, offering strong resume‑building and transferable skills, • No flexibility on start date: 7/6/2026, • No time off is permitted during the first 90 days or during holidays, • Overtime opportunities may be available once open enrollment begins, • Anticipated contract end date is 12/31/2026, with possible extension or conversion (not guaranteed)

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Shipfitter Reports to: Structural Superintendent PAY RANGE: $25 - $34 per hour (DOE) Responsible for the use of various tools and equipment in the fabrication, assembly, and erection of steel structure. This position includes drawing reading, steel structure removal shipboard and reinstall. The position requires a working knowledge of technical to include 1689 and 1688. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Ensure work is done safely and meets quality standards., • Must have own basic skill related tools and equipment if not supplied by the workplace., • Lay-out, fabricate and brace metal structural parts, such as plates, bulkheads, and frames., • Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools., • Locate and mark reference lines, such as center, buttock, and frame lines., • Position parts in hull of ship., • Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls., • Mark location of holes to be drilled and install temporary fasteners to hold part(s) in place for welding., • Install packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips., • May prepare molds and templates for fabrication of nonstandard parts., • May tack weld clips and brackets in place prior to permanent welding., • May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines., • Ensure work is done safely and meets quality standards., • Assemble items as instructed by floor supervisor., • Keep work areas clean and organized and take proper care of all equipment and facilities., • Follow all company rules and policies., • Provide a great level of attention to detail and focus on the given task., • Work with team members to maximize productivity and efficiency., • Prepare product for shipment., • Report any unsafe work conditions or practice to supervisor., • Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals., • Familiarity with the metric system, • Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents., • Ability to stand continuously for long periods of time., • Ability to identify and measure material., • Ability to follow instructions given both verbally and in written form., • Willingness to learn and work to the best of his/her abilities as well as dependable work ethic., • Knowledge of machines and tools, including their designs and uses., • High school graduate, or GED preferred., • Six months to one-year related experience and/or training, • Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime., • Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions., • Work over extended periods of time in tightly configured confined spaces., • May be made to enable qualified individuals with disabilities to perform essential job functions.\n\n Location California Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Position: Operations Supervisor Compensation: $75,000.00 annually Available Schedule: Monday through Friday, 2:00 PM- Midnight Job Description: Forward Air is looking for a capable and dedicated individual to work as an Operations Supervisor. The qualified candidate will coordinate all activities of dockworkers, drivers and other support personnel. The Operations Supervisor will provide planning for, direction to, and will control available resources associated with the timely, damage-free, and safe loading/unloading of freight on assigned shifts. In addition, the supervisor will provide dockworker and driver training, performance feedback, and provide disciplinary recommendations when necessary. Previous experience with cargo operations is plus. Core Responsibilities & Duties: • Ensure all work is performed according to Forward Air approved procedures, standards, and specifications for dock operations, • Directly supervise all activities of dockworkers and support personnel engaged in loading and unloading trucks and trailers, • Assign job tasks to workers according to unloading and loading schedules, • Provide guidance to subordinates on goals and objectives on a weekly basis, • Maintain appropriate load plans, • Ensure proper maintenance of facility, forklift equipment, trailers and handling supplies, • Execute appropriate load plans and proper load balance to ensure safe vehicle operation, • Coordinate work assignments, monitor performance, and provide training on relevant job duties, • Maintain facility appearance, condition and security, • Perform facility inspections, • Assist in the loading and unloading of trailers, • Other duties as assigned Qualifications: • Must have management experience (5-7 years preferred), in a high-volume, fast distribution environment, • Bachelor’s degree or higher in Management, Logistics, or Industrial Engineering preferred, • Previous route planning experience, • Strong team player that thrives in a fast-paced environment, • Ability to drive performance of direct reports and lead a team in a lean manufacturing environment, • Prior air freight experience is required, • International/Import experience is a plus, • Must possess demonstrated leadership ability, • Knowledge of proper freight handling techniques, • Ability to communicate effectively with all levels of operations, • Must be flexible to work weekends and nights, • Forklift and general freight handling experience, • Knowledge of Department of Transportation (DOT) rules and regulations, • Experience with a contingent workforce during peak seasons, • Must be able to frequently lift and/or move up to fifty (50) pounds, • Must be able to occasionally lift and/or move up to ninety (90) pounds Skills: • Ideal candidate will possess a “can do” attitude with a “will do” work ethic, • Must have the ability to work in a fast paced environment, • Have strong time management skills and the ability to work well under pressure, • Ability to communicate effectively with all levels of operations, • Strong team player that thrives in a fast-paced environment, • General computer skills - Microsoft Office, Outlook, AS400, • Excellent communication and problem solving skills Forward Air is an Equal Opportunity employer. #LI-TK1 #LI-Onsite Forward Air is a leading asset-light provider of transportation services across the United States, Canada, and Latin America. We provide expedited less-than-truckload services, including local pick-up and delivery, shipment consolidation/deconsolidation, warehousing, and customs brokerage by utilizing a comprehensive national network of terminals. In addition, we offer truckload brokerage services, including dedicated fleet services, and intermodal, first and last-mile, high-value drayage services, both to and from seaports and railheads, dedicated contract and Container Freight Station warehouse and handling services. Forward also operates a full portfolio of multimodal solutions, both domestically and internationally, via Omni Logistics. Omni Logistics is a global provider of air, ocean, and ground services for mission-critical freight. We are more than a transportation company. Forward is a single resource for your shipping needs We move freight, but we’re powered by people. Whether you’re in the warehouse, on the road, or behind the screen, every teammate keeps our global business in motion and brings logistics to life.

Location: San Diego, CA Field Service/Installation Technician at Benco Dental At Benco Dental, our company is our family, and we are looking for a new addition to assist us in Driving Dentistry Forward. Please review the description below carefully to ensure that this position is the perfect match for you! What's in it for YOU? * Excellent Compensation Packages * Medical, Dental and Vision Benefits Effective on Day 1 * 401k Package, Paid Time Off Program, and Profit Sharing * Associate Discounts and Community Giveback Programs * College Tuition Savings Program * Caring Family Culture Toward all Associates * Certified as a FORTUNE Great Place to Work * Opportunities to Build a Better Benco through Diversity and Inclusion Resource Groups * Family owned for 90+ years Position Summary: The Field Service/Installation Technician is a vital part of our company providing hands-on support to our customers. Service Technicians are independent team players who want to be customer focused. As the Service Technician, you will offer solutions to our clients that extend beyond repairs and maintenance to exemplify our number one goal: driving dentistry forward. Benco Dental offers service technicians career development and will provide a strong sense of accomplishment. Do YOU Possess These Skills and Attributes? * Computer proficiency, including knowledge of Windows-based programs * Organizational skills * Problem solving skills * Exceptional communication skills No Bio-Medical (dental) Device repair experience? No problem! Other relevant experience includes: * Mechanical or Technical experience/education * Electrical, Customer service, Military, or Software/hardware experience * Pneumatics * HVAC Do These Responsibilities Interest YOU? * Providing maintenance and repair services out in the field * Training staff on using equipment * Training customers on using equipment Do YOU Meet These Requirements? * High School Diploma or equivalent * Valid driver's license and clean driving record (Required) * Technical training in the bio-medical or electronics field (Preferred) * Physical: * Routine walking, bending, kneeling, and squatting, sitting, standing, reaching, and twisting * Must frequently lift/lower/carry/push/pull 1 to 55 pounds, occasionally lift/lower/carry/push/pull 56 to 100 pounds * Position requires routine pushing, pulling, grasping and manual dexterity in the use of hands, arms and shoulders * Able to work in tight spaces * Frequent travel to customer sites (daily) and occasional use of power tools The base pay range of $23.80-27.50/hour represents the low and high end of the hiring salary range for applicants that meet the minimum qualifications (Tech-in-Training). Actual salaries will vary and may be above the range based on factors including but not limited to location, experience, and performance. The range listed is just one component of our total compensation package for employees. Other financial rewards may include bonuses, profit sharing, and Paid Time Off. Who We Are: It's our Mission to Drive Dentistry Forward Benco Dental, the largest privately owned, full-service dental distributor in the United States, has remained in the family since 1930-a family that now includes our more than 40,000 customers and over 1,500 associates in the 48 contiguous states. We provide more supply and equipment options than any other full-service distributor, an offering enhanced by a comprehensive suite of services, including office design, equipment repair, practice coaching, financing and project management, wealth management and dental-specific technology solutions. These services are supported by over 400 professionally trained sales representatives and 300 factory-trained service technicians who begin every task by asking "What does the customer want?" If you enjoy working for a progressive company, who is committed to diversity in our workforce, who values all customers and associates, who also provides the opportunity for growth and development- we encourage you to learn more about our Benco family. We are looking for driven professionals who want to play a key role in our future success, while making a positive impact within our industry. Thank you for your interest in Benco Dental. We look forward to hearing from you! We're proud to be an equal opportunity and affirmative action employer. At Benco Dental we celebrate our associates' differences to foster a culture of diversity and inclusion every day. Click here to learn more about how we promote Equal Opportunity and Diversity and Inclusion at Benco. *This position is a field-based / territory-based / virtually- based / remote-based position that does not require consistently reporting to a physical Benco location.

Job Title: Aviation Operations & Support (Enlisted) Category / Component: Enlisted • Active Overview Aviation Boatswain's Mates in Aviation Operations & Support help launch and recover naval aircraft quickly and safely from ships and shore stations, handling aircraft on flight decks and in hangar bays and operating the support equipment that keeps aviation operations moving. With experience, some personnel may earn advanced designations that involve leading and supervising multiple aviation boatswain's mate specialties. Key Responsibilities Support aircraft launch and recovery operations in operational environments; assist with aircraft handling, movement, spotting, and securing of aircraft and equipment on flight decks and flight lines; operate aviation support equipment and systems used in aircraft operations; perform inspections and operational checks before and after equipment use; conduct preventive and corrective maintenance on assigned aviation support equipment; support safety practices including foreign object damage (FOD) prevention and emergency readiness; assist with emergency response and training drills related to aviation operations; support administrative and maintenance control activities as required. What to Expect Duties directly support aviation operations both on land and at sea; work includes a mix of operational support and hands on equipment and maintenance tasks; you gain increased responsibility over time as you qualify on equipment and watchstations, complete personnel qualification standards, and develop leadership skills through structured training and progression. Work Environment Work primarily in shipboard and shore station aviation environments, including flight decks, hangar bays, and flight lines; exposure to jet blast, rotor wash, noise, heat, weather, and moving equipment is routine; operations occur in a wide range of climates at sea and ashore and often follow the tempo of flight operations, including nights, weekends, and deployments. Pathways, Training & Advancement Recruit Training followed by rating specific training such as Aviation Boatswain's Mate (H) A School as assigned; continued development through Personnel Qualification Standards and similar programs; refresher and advanced training such as non skid quality assurance, crash and salvage, and advanced shipboard firefighting as required; training is documented through systems such as the Joint Services Transcript, and professional growth is reinforced through Navy e learning, college network opportunities, and leadership development focused on technical skill, professional knowledge, and intellectual growth. Enlist as an Aviation Boatswain's Mate candidate to enter the aviation operations and support pipeline; Reserve opportunities may exist for Selected Reserve billets when authorized and may require specific Navy Enlisted Classifications or a willingness to attend required training upon SELRES accession. Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy. Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter. Additional qualifications for this job may include: Ability to work safely around aircraft, support equipment, and moving machinery in high noise and sometimes harsh weather environments; physical fitness and stamina to stand for long periods, lift and move equipment, and perform duties on flight decks and flight lines; willingness to work in a team in fast paced, safety critical situations and to follow detailed procedures and checklists. Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities. Specific options depend on the Sailor's status, training, and current Navy policy. Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options. Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance. Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed. Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source. Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community. It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes. Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

M1 Support Services, LP 1500 Solana Blvd Suite 5200 Westlake, TX 76262 m1services.com Aircraft Mechanic II (Airframes) Location San Diego, CA Job Posting 114000 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date 06/08/2026 Contract CFT HSM - 41 North Island Salary Range $45.27/Hour Posting Date 04/27/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: As an Aircraft Mechanic II (Airframes) you will be responsible for maintaining and repairing various aircraft systems, including engines, avionics, hydraulics, armament, landing gear, and more. You will also perform inspections, troubleshooting, and repairs for both structural and functional components, while managing other mechanics to ensure timely task completion Primary responsibilities include but are not limited to the following: * Aircraft Maintenance: Repair and rebuild aircraft systems, including engines, avionics, hydraulics, and structural components. Perform troubleshooting, inspections, and repairs as required. * Leadership: Manage and supervise mechanics, ensuring timely completion of tasks and compliance with safety standards. You will also approve time cards for team members. * Technical Expertise: Interpret technical manuals and data to determine repair methods. Perform various types of inspections on engines, systems, and components. * Specialized Areas: You may specialize in specific areas, such as engine, airframe, electrical, or armament repair. You will be responsible for modifications, inspections, and keeping aircraft in safe, mission-ready condition. * Support Equipment Compliance: Ensure that Technical Directives (TDs) are followed for aircraft maintenance and equipment management. Ensure compliance with safety and quality standards. * Safety & Quality: Ensure that all safety and quality procedures are adhered to, including hazardous materials handling, FOD prevention, and completing required training. * Certifications: CDQAR (Collateral Duty Quality Assurance Representative) Page 2 of 3 Qualifications and Experience: * Education & Experience: High school diploma or equivalent, with at least eight (8) years of recent experience in rotary aircraft maintenance, specifically with the H-60 series (including experience as a CDQAR/QAR). * MH60-R experience is preferred, along with prior experience in U.S. Navy aircraft maintenance. * Leadership: At least two years of management experience overseeing a team of mechanics. * Technical Knowledge: Ability to interpret complex technical manuals, perform inspections, and use specialized tools/equipment. * Certifications: CDQAR (Collateral Duty Quality Assurance Representative) equivalent experience. and complete aviation ordnance qualifications. * Candidate must be AS9100 qualified. * Ability to obtain a Tier 3 Background Investigation and possibly a Secret Clearance. * Shift Flexibility: Availability to work all shifts as needed based on flight schedules and task requirements. * Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards Additional Requirements: * Ability to work with foreign cultures and languages. * Successfully pass a pre-employment drug screen and medical examination. * Ability to meet physical requirements for the position. * Compliance with safety, quality, and environmental regulations. * Must be able to handle and dispose of hazardous materials as required. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing for a long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. Page 3 of 3 * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Westlake, Texas, provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic I - Aviation Ordnance (Plus Up) Location San Diego, CA Job Posting No 113843 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM-41 North Island Salary Range $43.11/Hour Posting Date 01/27/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: Aircraft Mechanic I - Aviation Ordnance will be responsible for performing maintenance on various components of military aircraft, specifically focusing on H-60 series helicopters, including the MH60-R. Your duties will span across a variety of systems, including airframes, engines, avionics, landing gear, rotor systems, and more. Primary responsibilities include but are not limited to the following: 1. Aircraft System Repair & Rebuilding: o Perform repairs and rebuilds across all aircraft systems, including structure, engines, rotors, avionics, hydraulic units, and flight surfaces. o Use tools and equipment such as welders, drills, rivet guns, and sheet metal brakes to maintain aircraft parts. 2. Technical Document Interpretation: o Read and interpret maintenance manuals, technical data, and service bulletins to plan and execute repairs on malfunctioning or damaged aircraft components. 3. Aircraft Inspections & Testing: o Conduct regular maintenance inspections (175-hour, progressive, phase, and periodic Hourly and calendar inspections) to detect cracks, leaks, corrosion, or wear on components like engines, turbine blades, and hydraulic systems. o Use testing equipment for engine operations and replace damaged parts. 4. Flight Support Maintenance: o Perform preflight, thru-flight, and post-flight inspections. o Service aircraft (flushing gearboxes, cleaning filters, greasing moving parts, checking brakes). 5. Aircraft Handling: o Jack, tow, moving aircraft, spotting aircraft and maintain aircraft in safe operational condition. o Enter maintenance records and ensure all repairs are documented correctly. 6. Leadership & Supervision: o Lead and supervise junior mechanics, ensuring safety and quality during all tasks. 7. Specialization Areas: o Potential to specialize in areas like engine repair, airframe maintenance, or avionics. All MH60-R Aviation Ordnance 8. Safety & Quality Compliance: o Ensure compliance with all safety and quality procedures, including Hazmat handling and FOD (Foreign Object Damage) prevention. o Participate in safety programs and perform housekeeping duties in the shop. Page 2 of 3 o Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. Additional Responsibilities: * Participate in Aviation Gas Free Program and obtain necessary support equipment licenses. * Comply with all safety protocols, training requirements, and emergency response duties. * Maintain necessary certifications such as Collateral Duty Inspector (CDI) or Quality Assurance Representative (QAR). Qualifications and Experience: * Education: High school diploma or equivalent. * Experience: o Minimum 5 years of experience with H-60 series aircraft (or equivalent rotary aircraft experience). MH-60R experience preferred. o At least 5 years Aviation Ordnance, MH60-R CDI/CDQAR experience. * Certifications: Ability to obtain and maintain qualifications in line with U.S. Navy instructions (e.g., CDI, QAR). Ordnance certification shall be required to obtain. * Security Clearance: Must be able to pass and maintain a Tier 3 Background Check. Some roles may require a secret clearance. * Technical Skills: Ability to read and interpret technical data, manuals, and special operating instructions. * Language Skills: Must be able to read, write, and understand English. Additional Requirements: * Ability to work with foreign cultures and languages. * Successfully pass a pre-employment drug screen and medical examination. * Ability to meet physical requirements for the position. * Compliance with safety, quality, and environmental regulations. * Must be able to handle and dispose of hazardous materials as required. * Must possess a valid state driver's license. Working Conditions: * Occasional lifting up to 50 pounds. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organizing skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. Page 3 of 3 * Standing long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Promote Safety. Take an active role prioritizing safety for yourself and others to ensure all assigned plants have zero accidents and are in total compliance with all Vulcan policies and procedures. Organize and Plan Production. Plan the daily operation scheduling of plant production to ensure optimal utilization of plant equipment, personnel, and inventory requirements. Ensure optimal utilization of work procedures in regards to stripping, mining, processing, stockpiling, loading, and shipping. Maintain responsibility for all aspects of site planning and pit development. Manage Employee Relations. Provide strong leadership, training, team building, and supervision to all employees at the plant in order to support the operational function of the business. Work cross-functionally with HR to recruit new employees, provide merit increases, perform disciplinary actions, and evaluate the performance of employees in order to develop talent. Monitor Processes and Materials. Analyze production and quality control to ensure a quality product for our customers. Monitor operational reports to ensure best practices in extraction, processing, stockpiling, and re-handling and that product remains within target specifications. Implement and monitor a preventive maintenance program to limit work stoppages, downtime, and other disruptions. Ensure Economic Profit. Manage financial decisions for the plant, including budgets, forecasts, inventory management, and labor and capital planning to ensure adherence to all budgets and financial goals. Seek improvement activities to reduce costs and improve operating efficiency across the plant. Maintain Compliance. Build a strong safety culture to ensure the plant is in compliance with Vulcan's safety, operations, and environmental policies and procedures. Manage the health and safety of employees to continuously improve Vulcan's health & safety performance. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Experience in supervising production employees at an aggregate, sand/gravel, or asphalt plant is preferred. Leadership and Management Skills. Must be able to provide strong leadership and guidance to employees, both direct and indirect reports, to motivate and maintain social relationships. Operational Knowledge. Must demonstrate knowledge and understanding of rock and sand mining, ready-mix concrete and/or asphalt operations and equipment, MSHA regulations, engineering principles and procedures, and quality control systems and processes. Interpersonal Skills. Must be an excellent motivator and team builder. Must be able to form strong social relationships and effectively communicate with both internal and external audiences. Financial Knowledge. Must possess knowledge and experience managing financial performance to established targets. Flexibility. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. What You'll Like About Us: Salary Range. The base salary range for this role is between $120,000 - 140,000 annual salary. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Great Company Culture. Our people share a competitive drive for ___ in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. ___ to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing ___. Health Benefits. Medical, Dental, Vision programs, ___. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see ___ and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. : Plant Management : California-San Diego : GM - SO CAL : Full-time : Apr 17, 2026, 7:19:44 PM

Olgoonik is an Equal Opportunity Employer Overview: Perform full range of duties in the receipt, stow and issue of material. Ensure items being stowed meet requirements of MIL-STD 129N. Primary Responsibilities: • Identify, examine, classify, accept, reject, and dispose of material as per DLA regulations. Examinations may be visual or require measuring devices and techniques under supervision of senior staff or management., • Load material on and off skids, pallets, and stands., • Operate tools and equipment in performance of duties., • Receive data from and input data to DSS and other automated supply systems in performance of duties., • Operate Material Handling Equipment (MHE) as assigned and hold appropriate license., • Count, weigh, record data, apply tags and labels., • Able to use basic processes of inspection/examination procedures for material., • Able to read specifications, drawings, prints, schematics and photographs., • Able to prepare reports relating to distribution functions., • Able to make preventive maintenance adjustments to related equipment., • Perform all other duties as assigned working with and around Hazardous Material., • Have and maintain a CDL, Class A with a HAZMAT endorsement. Education and/or Experience: • Must have High School Diploma or GED., • Minimum three years' specific experience in material handling, supply, distribution, inspection, or related areas., • Must be able to acquire license to use Material Handling Equipment (MHE)., • Must be proficient in the use of Distribution Standard System (DSS) and other automated distribution systems used at site., • Must be proficient with Microsoft Suite of products including, Word, Excel, Access and E-mail business software., • Must demonstrate a good attitude and ability to work as a member of a team., • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail., • Excellent driving record. Certificates, Licenses, Registrations: • Material Handling Equipment (MHE)., • Valid driver's license., • Provide continuous support for Hazardous materials (HM). Packaging and Shipping of hazardous material needs to be completed within 1 day of receipt. All packaging must be conducted by a HM certifier certified to Defense Transportation Regulations, Part III, Appendix J. All received HM will be processed in RDS and delivered to the NIWC HAZMAT Center according to current guidelines., • Affix proper shipping documentation, labels, and HM labels, as well as HM Dangerous Goods Declaration or Certification to material to be shipped. Security Clearance: Position requires U.S. Citizenship, a US Government background check and may require a US Government SECRET Clearance. If the SECRET Clearance Level is required, the candidate must also: • Have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered investigation., • Be able to maintain a US Government SECRET clearance. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs overhead and/or repetitively. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Number ICIMS-2026-10080 Job function QA&RA Job type Temporary Location Werfen - San Diego - AID - 9900 Old Grove Road San Diego, California 92131-1638 United States Country United States Shift 1st Introduction Werfen Werfen is a growing, family-owned, innovative company founded in 1966 in Barcelona, Spain. We are a worldwide leader in specialized diagnostics in the areas of Hemostasis, Acute Care Diagnostics, Transfusion, Autoimmunity, and Transplant. Through our Original Equipment Manufacturing (OEM) business line, we research, develop, and manufacture customized assays and biomaterials. We operate directly in 30 countries, and in more than 100 territories through distributors. Our Headquarters and Technology Centers are located in the US and Europe, and our workforce is more than 7,000 strong. Our success comes from a specific focus in these rapidly evolving diagnostic areas, our commitment to customers, and our dedication to innovation and quality. We're passionate about providing healthcare professionals the most valuable and complete solutions to improve hospital efficiency and enhance patient care. Overview Job Summary The Temporary Document Control Specialist III guides, executes, and improves Document Control processes including document changes, quality records control, labeling creation, SAP master data entry, and training record maintenance activities. This role ensures compliance with organizational standards and regulatory requirements and improves the efficiency and quality of Document Control processes. The Document Control Specialist III demonstrates subject matter expertise in document control processes and regulatory requirements. The position is responsible for carrying out activities and facilitating processing associated with change orders, SAP training sessions, quality plan tasks, document and record processing, metrics, artwork for labeling, and other tasks to achieve department objectives. The Document Control Specialist III works closely with department management and other Quality teams to ensure activities and tasks are accurately and efficiently completed and also works independently; uses professional judgement to make decisions with in areas of authority. Completes work in accordance with Inova Quality Management System. Responsibilities Key Accountabilities The main activities for this role include: • Document and Data Processing and Entry - Initiate and process change orders: review change orders verbiage and content for errors, inconsistencies, and incompleteness; confirm documents and records comply with standardized formats and file naming conventions; and affected items; confirm approvers are appropriate to the change; communicate proactively with stakeholders to ensure efficiency of change order processing; work with change owners and reviewers on required corrections and clarifications; monitor aging change orders and facilitate issues resolution in a timely manner; ensure completion of implementation actions prior to effective status of the change; and coordinate periodic review. Maintain signature and delegation records. Create and maintain SAP master data. Ensure physical controlled copies are maintained at point of use., • Document and Record Lifecycle Management- Optimize processes while performing creation, acceptance, review, storage, distribution, and archiving controlled documents and records from initiation through obsolescence and disposal., • Department Procedures - Create and revise document and record lifecycle management, training, and product labeling SOPs, work instructions, checklists, forms, and templates. Maintain accuracy and compliancy of procedures., • Process Improvement - Lead and implement Document Control department process improvements for accuracy, efficiency, effectiveness, and cycle times. Make process corrections based on process data trends. Represent Document Control in cross-functional projects., • Training & Support - SME for training in Document Control department activities and requirements. Develop, deliver and maintain training materials for document control practices to the organization. Train new team members to procedures. Assist in creation of training sessions, and follow-up on completion of training by users., • Metrics & Reporting - Maintain tracking data and reporting documents, labeling, and training metrics, reports, and dashboards. Analyze and respond to trends., • Product Labeling - Optimize processes while performing creation, review, maintenance, and archiving product labeling from initiation through obsolescence. Print restricted product labeling., • Quality Records Management - Optimize processes while performing scanning, filing, archival and disposal of paper and electronic quality records through required retain durations as well as processing quality records for off-site storage., • Audit Support - Support internal and external audits and regulatory inspections. At minimum, pull requested audit documents and records, respond to auditor queries, represent Document Control in audits and inspections., • Compliance - Follow applicable Werfen standard operating procedures (SOPs), national and international and other Quality System regulations, ISO standards, as well as applicable Environmental Health & Safety, Human Resources and all other regulatory and administrative policies.., • Perform other duties and responsibilities as assigned. Networking/Key relationships • Quality Teams, • Regulatory Teams, • Manufacturing Teams, • Operations Teams, • Marketing Teams, • Supply Chain Teams, • Legal & Human Resources Minimum Knowledge & Experience required for the position: Education: Bachelor's degree in a relevant field (e.g., Life Sciences) or equivalent experience required. • Advanced knowledge of document lifecycle management and maintaining documents within quality system requirements., • Advanced knowledge of Quality Management System regulations ISO 13485, and related standards as pertain to document, quality record, training records, labeling artwork control., • Advanced experience in drafting, updating, and implementing SOPs, work instructions, forms, templates, and other QMS controlled documents., • Advanced experience in document control configuration and document lifecycle management within a regulated quality management system., • Advanced experience with SAP for document control and material master management., • Experience leading departmental projects as well as providing representation in interdepartmental projects., • Experience with quality-related training systems., • Experience with computerized information systems (e.g., ERP, eDMS, LMS) required. Skills & Capabilities: • Attention to Detail & Accuracy: Thorough attention to detail and commitment to accuracy; ensures completeness and precision in documentation., • Organization & Time Management: Proficient organizational skills with the ability to manage multiple priorities and meet deadlines in a fast-paced environment., • Communication: Proficient written and verbal communication skills in English; able to effectively communicate and train on document control requirements and processes., • Collaboration & Interpersonal Skills: Advanced interpersonal skills for cross-functional collaboration; able to influence and negotiate to achieve optimal outcomes., • Customer Service Orientation: Responds promptly to requests and drives stakeholder satisfaction., • Process Improvement: Ability to analyze current processes, identify gaps, and implement effective solutions., • Adaptability: Ability to support changing business needs and work effectively in dynamic environments., • Problem-Solving: Proficient in identifying and resolving complex issues and problems; seeks help and guidance for cross-functional issues and problems. Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to communicate. Must be able to detect, identify and inspect scientific data. The employee will be required to stand and/or walk up to 8 hours per day and/or sit for up to 8 hours per day. Must be able to use hands to feel objects, including keyboard, telephone and pipettes or other lab equipment. May need to reach with hands and arms, climb stairs, balance, stoop, kneel or crouch. Will be required to talk and hear and have specific vision abilities, including close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. May occasionally have to lift and/or move up to 25 pounds. The noise level in the work environment will vary but is usually moderate. This position is very active and requires varying levels of mobility. The annual base salary range for this role is currently $24.00 range to $34.00 range. Individual employee compensation will ultimately depend on factors including education, relevant experience, skillset, knowledge, and particular business needs. This is a 3-12-month job contract. This role is eligible for medical, dental, and vision insurance, 401k plan retirement benefits with an employer match, as well as paid vacation and sick leave. Our sales roles are eligible for participation in a commission plan and our management, and select professional roles, are eligible for a performance-based bonus. If you are interested in constantly learning and being challenged on a daily basis we encourage you to submit your resume or CV. Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen strictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact for assistance. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team. If you are interested in constantly learning and being challenged on a daily basis we encourage you to submi Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen s trictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact for assistance.t your resume or CV. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team.

Community: Canyon Rim Number of Units: 504 If you're driven and seek a collaborative workplace that makes a difference, Fairfield might be the place for you. As a leader in the multifamily housing industry, we're passionate about creating exceptional apartment living. As we continue to grow, we're dedicated to investing in our people. Our culture is built on trust, support, and the drive to do great work. Whether you're launching your career or bringing years of experience, you'll find opportunities to make an impact, develop your skills, and be part of something bigger. Come build your future with us! As a Maintenance Technician II, you will play a crucial role in ensuring the smooth operation and maintenance of our residential community. You will be responsible for performing daily maintenance tasks, diagnosing and repairing issues in electrical, plumbing, and appliances, and preparing vacant apartments for new residents. You will also participate in the emergency on-call rotation. Your work will directly impact the safety, cleanliness, and overall appeal of the property, contributing to a positive living experience for our residents. Below is a snapshot of what this role is all about. While there is more to it, this is the core focus. Maintenance Tasks • Perform daily maintenance and repairs in electrical, plumbing, and appliances., • Respond promptly to maintenance requests., • Prepare vacant apartments for new residents using the Make Ready Checklist., • Maintain the exterior of the property and pool areas. Property Inspection and Safety • Inspect buildings and grounds for safety and cleanliness., • Conduct regular inspections of common area systems. Communication and Reporting • Communicate with vendors and contractors., • Report inventory needs and potential liabilities. Compliance and Safety • Ensure compliance with Fairfield policies and procedures., • Respond to on-call emergencies and assist with resident notices., • Follow safe work practices and participate in training. We're all about creating communities that people are proud to call home. Being a part of Fairfield means more than a rewarding career with personal growth. It's a partnership, working alongside colleagues in an open-dialogue environment that encourages growth and the sharing of ideas. We know that our associates are a key ingredient to our success, and we're proud to reflect that in our culture. • Driven by Vision: We are a vertically integrated operator and investment manager in the multifamily sector with in-house development, construction, acquisition, and property and asset management services. As we continue to grow, we want you to grow with us., • Career Growth & Learning: Fairfield values new ideas at every level. We offer training, coaching, and mentoring to help associates develop their careers and inspire them to create change for the better., • Culture of Collaboration: Enjoy a professional, supportive environment where we work together to drive meaningful impact., • A Company that Cares: We are proud to offer robust benefit packages with a focus on both quality of care and affordability. We offer competitive compensation plans, 401(k) matching, and paid time off, including sick days and volunteer time off (VTO) to support causes that matter to you. Education and Certifications • High school diploma or equivalent required, • Valid Driver's License is required Experience • Minimum one year of previous experience in property management maintenance, other building maintenance, or related trade required Skills and Competencies • Ability to read, write, understand, and communicate in English, • General computer skills, including operating a mobile device, • Strong attention to detail, organizational, time-management, and problem-solving skills, • Superior customer service skills, including the ability to manage difficult customers and situations, • Working knowledge of plumbing, electrical, and appliance repair, • Professional verbal and written communication skills, • Ability to work independently, • Ability to be on-call for after-hours emergencies, • Ability to work a flexible schedule, including weekends, evenings, and holidays Ready to make an impact and take your career to the next level? Apply today! #LI-MARSHALL Estimated Rate of Pay: $23.25 - $26.00 This position is non-exempt; the range above reflects hourly rates. The pay range displayed for this position is determined by skills and experience required, location and job complexity*. Potential job offers may vary based on the skills, education, and experience an individual candidate holds. This range reflects base rate only, and does not include allowances, perks, commissions or bonuses applicable to this position (if any). In addition to base salary, Fairfield offers all full time associates the following, upon meeting eligibility requirements: • Paid time off, paid holidays and sick days, paid time off for volunteering activities (optional), • Matched 401(k), • Medical, dental & vision insurance, • Flexible spending account, • Life insurance, • Pay range is a calculation based on a midpoint price. Fairfield complies with all wage and hour laws, including minimum wage and salary exempt requirements. Job duties for this position include: work safely and cooperatively with others, including supervisors; adhere to performance standards despite stressful conditions; communicate effectively and respectfully to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations. The material duties of this position involve access to our residents' homes, both when they are present and when they are not. The material duties of this position also involve access to the confidential information of our residents, including their financial information. Criminal history may have a direct, adverse, and negative relationship with this job duty. Pursuant to the Los Angeles, San Francisco, and San Diego County Fair Chance Ordinances, the California Fair Chance Act, and any other applicable law, we will consider for employment qualified applicants with arrest and conviction records.

Olgoonik is an Equal Opportunity Employer Overview: Perform full range of duties in the receipt, stow and issue of material. Ensure items being stowed meet requirements of MIL-STD 129N. Primary Responsibilities: • Identify, examine, classify, accept, reject, and dispose of material as per DLA regulations. Examinations may be visual or require measuring devices and techniques under supervision of senior staff or management., • Load material on and off skids, pallets, and stands., • Operate tools and equipment in performance of duties., • Receive data from and input data to DSS and other automated supply systems in performance of duties., • Operate Material Handling Equipment (MHE) as assigned and hold appropriate license., • Count, weigh, record data, apply tags and labels., • Able to use basic processes of inspection/examination procedures for material., • Able to read specifications, drawings, prints, schematics and photographs., • Able to prepare reports relating to distribution functions., • Able to make preventive maintenance adjustments to related equipment., • Perform all other duties as assigned working with and around Hazardous Material., • Have and maintain a CDL, Class A with a HAZMAT endorsement. Education and/or Experience: • Must have High School Diploma or GED., • Minimum three years' specific experience in material handling, supply, distribution, inspection, or related areas., • Must be able to acquire license to use Material Handling Equipment (MHE)., • Must be proficient in the use of Distribution Standard System (DSS) and other automated distribution systems used at site., • Must be proficient with Microsoft Suite of products including, Word, Excel, Access and E-mail business software., • Must demonstrate a good attitude and ability to work as a member of a team., • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail., • Excellent driving record. Certificates, Licenses, Registrations: • Material Handling Equipment (MHE)., • Valid driver's license., • Provide continuous support for Hazardous materials (HM). Packaging and Shipping of hazardous material needs to be completed within 1 day of receipt. All packaging must be conducted by a HM certifier certified to Defense Transportation Regulations, Part III, Appendix J. All received HM will be processed in RDS and delivered to the NIWC HAZMAT Center according to current guidelines., • Affix proper shipping documentation, labels, and HM labels, as well as HM Dangerous Goods Declaration or Certification to material to be shipped. Security Clearance: Position requires U.S. Citizenship, a US Government background check and may require a US Government SECRET Clearance. If the SECRET Clearance Level is required, the candidate must also: • Have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered investigation., • Be able to maintain a US Government SECRET clearance. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs overhead and/or repetitively. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic I - Airframes (Plus Up) Location San Diego, CA Job Posting No 113844 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM-41 North Island Salary Range $43.11/Hour Posting Date 01/27/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: The Aircraft Mechanic I (Airframes) role involves performing maintenance on aircraft systems, including structures, landing gear, flight surfaces, engines, avionics, hydraulic systems, and more, as part of the HSM-41 Navy or Multi-Foreign component. This position works closely with foreign and U.S. personnel to maintain and ensure aircraft safety and mission readiness. Primary responsibilities include but are not limited to the following: * Aircraft Maintenance & Repair: o Repair and rebuild aircraft systems (structure, engines, rotor systems, avionics, etc.). o Work with tools such as shears, welding equipment, rivet guns, drills, and more to ensure proper maintenance of systems. o Handle and repair components like hydraulic units, plumbing, and surface controls. * Inspection & Troubleshooting: o Perform 175-hour, isochronal, phase, and periodic inspections. o Examine engines for cracks, corrosion, leaks, and other defects; test engine operations and repair or replace components as needed. o Inspect and service various aircraft parts including turbines, generators, fuel pumps, and more. * Electrical & Accessory Maintenance: o Perform repairs and replacements of electrical wiring systems and aircraft accessories. o Conduct preflight, through-flight, and post-flight maintenance inspections. o Service the aircraft by cleaning filters, greasing parts, and ensuring brake and corrosion prevention. * Jacking, Towing & Records: o Participate in aircraft jacking and towing. * Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. * Leadership & Specialization: o May specialize in specific areas such as engines, airframes, electrical, or armament repair. o Monitor safety procedures and ensure the aircraft remain in safe, mission-ready condition. * Maintain necessary certifications such as Collateral Duty Inspector (CDI) or Quality Assurance Representative (QAR). * Other Responsibilities: o Housekeeping in the work area. o Participate in FOD (Foreign Object Damage) program. o Handle hazardous materials (Hazmat) and work in compliance with safety requirements. o Obtain necessary licenses for specialized equipment. Page 2 of 3 Qualifications and Experience: * Education & Experience: o High school diploma or equivalent. o Minimum of 3 years of H-60S/R/F/H Aircraft Maintenance experience or equivalent rotary aircraft maintenance experience. o Experience with MH60-R Aircraft highly preferred. o Minimum of 3 years of experience as CDI/CDQAR (Collateral Duty Inspector/Quality Assurance Representative) for H-60 aircraft. * Technical Skills: o In-depth knowledge of aircraft and maintenance procedures. o Ability to read and interpret technical data, manuals, and special operating instructions. * Certifications: o Must be able to obtain and maintain CDI or QAR qualifications. o Must be able to obtain and maintain all required qualifications as per CNAFINST 4790.2 (series). * Clearance & Licensing: o Must be able to obtain and maintain a T3 Security Clearance. o Must be able to obtain a Common Access Card (CAC). o Must have a valid state driver's license. * Work Schedule: o Ability to work all shifts as per the flight schedule. o Flexibility in start and end times based on operational needs. * Language Skills: Must be proficient in reading, writing, and understanding English. Additional Requirements: * Ability to work with foreign cultures and languages. * Successfully pass a pre-employment drug screen and medical examination. * Ability to meet physical requirements for the position. * Compliance with safety, quality, and environmental regulations. * Must be able to handle and dispose of hazardous materials as required. Working Conditions: * Occasional lifting up to 50 pounds. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organizing skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper Page 3 of 3 safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

Olgoonik is an Equal Opportunity Employer Overview: The Heavy Truck Driver drives gas or diesel powered trucks. Picks up, transports and deliver parts, material, equipment and components to pre-determined destinations. Vehicles typically weigh less than 1 tons. Drives vehicles both on and off of Government installations and in light to heavy traffic conditions. Transports Hazardous Material (HAZMAT) as necessary in performance of depot mission. Primary Responsibilities: • Drives trucks up to 26,000 pounds to destination for pickup and delivery based on instructions or directions received and by using maps., • Inspects truck for defects before and after trips., • Monitors vehicle during operation and reports maintenance/repair requirements to Dispatcher., • Secures loads being transported to ensure safe and undamaged arrival at destination., • Reports and receives direction via radio or cellular phone., • Assists in loading and unloading of material transported., • Must be able to hook up and/or disconnect tractor-trailer combination vehicles., • Maintains driver log according to ICC regulations., • Performs daily preventive maintenance adjustments to truck., • Performs all other duties as assigned. Supervisory Responsibilities: • Perform supervisory duties as assigned. Education and/or Experience: • Must have High School Diploma or GED (May substitute experience for education on a year-by-year basis)., • Must be able to obtain license to use any equipment for which a current license is not held within 30 days of selection., • Minimum six months general experience., • Minimum of six months specific experience demonstrating knowledge required to perform duties of position. Knowledge, Skills, and Abilities: • Must be proficient with Microsoft Suite of products including, Word, Excel, Access and E-mail business software., • Must demonstrate a good attitude and ability to work as a member of a Team., • Must be self-motivated and have the ability to work effectively under a minimum of supervision., • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail. Certificates, Licenses, Registrations: • Must have valid Commercial Driver's License (CDL). Security Clearance: SECRET Level Required • Must have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered Investigation., • Must be a U.S. Citizen., • Must also be able to maintain a US Government SECRET clearance. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs. overhead and/or repetitively. Outside work in hot and cold or wet weather is occasionally required.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Promote Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Repair and Maintain Electronic Equipment. Service, repair, calibrate, regulate, fine-tune, and test machines, devices, electrical systems, conductors, and associated equipment at aggregate, asphalt, ready-mix concrete, ship, and rail unloading systems. Troubleshoot and Diagnose Equipment. Detect and diagnose all electrical wiring, appliance, fixture, and machinery problems, failing components, and malfunctions while making corrections and striving to improve equipment reliability. Inspect Equipment, Structures, and Material. Complete scheduled checks of all electrical equipment and systems in order to detect any malfunctions and unsafe conditions throughout the plant. Interpret Blueprints, Schematics, and other Documentation. Work with blueprints, schematics, manuals, and other specifications to determine safe and effective installation procedures. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Previous experience in construction or industrial electrical work is preferred. Knowledge of Best Practices. Must demonstrate a strong knowledge of electrical codes and electrical theory. Motor control is preferred (NEC, NESC, & MSHA). Flexibility. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Must be willing to work overtime and extended hours depending on customer and company demands. Mechanical Skills. Must have some knowledge of electrical tools, their uses, and maintenance. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for ___ in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. ___ to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impact daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing ___. Health Benefits. Medical, Dental, Vision programs, ___. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see ___ and helping our employees meet their goals as a key part of our business. Salary Range. The base hourly range for this role is between $40.00 - $55.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our ___ as it relates to the use of temporary staffing agencies, placement services and professional recruiters. : Equipment Maintenance : California-Chula Vista : GM - SO CAL : Full-time : Nov 10, 2025, 9:39:14 PM

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Supply Technician (Plus Up) Location San Diego, CA Job Posting No 113888 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM-41 North Island Salary Range $40.70/Hour Posting Date 02/18/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: M1 is looking for a Supply Technician. This role involves managing various supply activities for the US Navy, such as inventory management, material coordination, cataloging, and tool control. The ideal candidate will have strong experience in aviation supply systems and Navy logistics, with a focus on maintaining stock levels, managing tools, and ensuring the timely delivery of required parts and materials to support operations. Primary responsibilities include but are not limited to the following: * Inventory Management: Manage inventory for decentralized and decontrolled items, including supplies and equipment, ensuring accurate tracking and reporting. * Material Coordination: Coordinate the supply of materials for special programs, maintenance or production shops. * Cataloging and Supply Channels: Catalog supply items and manage supply channels according to agency regulations. * Supply Regulations Compliance: Ensure all actions are carried out within the framework of established supply regulations, policies, and procedures. * Communication and Coordination: Interact with operating officials and representatives of government agencies or commercial firms regarding supply needs, material descriptions, or procurement lead time. * Tool Control Program Management: Serve as the program manager for the tool control program, ensuring tools are properly maintained and accounted for. * Quality Assurance: Perform inspections and checks to ensure materials meet quality standards and correspond to receiving documents. * Aviation Material Control: Support aviation maintenance material control functions, ensuring the proper materials are available for aircraft maintenance. * OPTAR and AFM Compliance: Ensure proper management of Operational Target (OPTAR) and Aviation Fleet Maintenance (AFM) funding requirements. * Material Ordering and Expediting: Order parts and expedite the requisition process for aircraft parts, ensuring timely delivery and status updates to Maintenance Control. * Fuel and Flight Gear Tracking: Track daily fuel expenditures, produce reports, and maintain accurate inventories of flight gear and aircraft material readiness. Page 2 of 3 * Hazardous Material Control: Oversee hazardous material control and management functions in accordance with relevant regulations. * Tool Room Management: Perform tool room management tasks in compliance with established procedures, including metrology, calibration, and inventory tracking. * Reconciliation and Reporting: Assist with reconciliation of fuel expenditures, monthly reporting, and the end-of-year financial close-out. * Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. Qualifications and Experience: * High school diploma or equivalent. * Must be able to read, write, and understand English. * Minimum of three (3) years of H-60 series aircraft maintenance experience (or equivalent rotary aircraft experience), with at least three (3) years of experience as a CDI/CDQAR. * MH60-R experience is preferred. * Obtain necessary certifications like CDI (Collateral Duty Inspector) or QAR (Quality Assurance Representative) * Ability to obtain and maintain required qualifications in line with US Navy maintenance guidelines. * Must have strong leadership skills and the ability to work collaboratively with a diverse team, often in cross-cultural environments. * Proficiency with computer programs, including Word, Excel, Outlook, and NALCOMIS/OOMA. * Must be able to work various shifts depending on the flight schedule. * Required to obtain and maintain a favorably adjudicated Tier-3 Background Investigation and possible secret clearance. * Must be able to work all shifts. Full time employment: however, 40-hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. * Current valid U.S. Driver's License. Working Conditions: * Occasional lifting from 5 to 50 pounds with mechanical help or help from other employees, 5 pounds is normal everyday lift. * Ability to work under pressure and deadlines, with a need for strong organizational skills and mental alertness M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. Page 3 of 3 M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

Background Information:___ (IDT), provider of cutting-edge cloud-based integration, automated testing and data analysis for complex, mission-critical systems in the US Department of Defense (DOD), is seeking a Field Test Engineer to be based in our Arlington, VA or San Diego, CA office. Leveraging advanced software automation, model-based systems engineering (MBSE), and AI-driven capabilities, IDT accelerates capability development, enhances operational readiness, and reduces lifecycle costs for the Department of Defense. The company is dedicated to transforming defense systems through innovation, efficiency, and mission-critical results.Overview:The Field Test Engineer will work in a fast paced, customer-focused team that understands the customer's goals and needs. The Field Test Engineer must possess the desire and skills to work with the team of IDT designers, learn and utilize product features and capabilities and assist in the fielding, testing and operational execution during test and experimentation. They will participate in developing, testing and operating experimental technologies and capabilities for rapid deployment and testing in various test environments. The selected engineer must have sufficient experience working with both hardware and software systems and must be familiar with deploying and operating hardware and applications in a mission critical environment.The ideal candidate will have skills applicable to instrumentation and data recording, operational monitoring and assessment against requirements, and training/documentation methods to help the test execution lead understand results and take corrective actions. The Field Test Engineer will learn IDT's technologies and how to execute them at deployed test sites to accelerate the pace of install, test, deployment, and in-service operation.All applicants must currently possess an active U.S. Security Clearance.Responsibilities Include: • Provide operational and maintenance support of deployed software/hardware infrastructure supporting various DoD and Navy operational and developmental testing and experimentation., • Perform deployment, installation, training and operational support of new software/hardware infrastructure across various test sites and Navy platforms., • Coordinate with senior warfighters and government sponsors to plan, schedule and accomplish installation checkouts, operational testing and mission execution., • Review software designs, generate test plans and procedures, and troubleshoot discrepancies during test events., • Communicate directly with customers and users to understand needs and drive cross-functional technical issues/challenges during test events.Minimum Required Qualifications:, • Bachelor's degree in engineering, computer science, mathematics, physics, or other STEM field; or equivalent full-time professional experience, • 1-3 years of related experienceRequired Skills:, • Ability to learn unique hardware/software deployment configuration and operations to be tested on-site., • Hands-on experience in deploying and maintaining applications in a mission critical operational environment., • Ability to communicate with senior warfighters and test leads and assist with the test execution., • Understanding of performing test and integration, applying best engineering practices, and developing test and operational methodologies, • Ability to apply troubleshooting techniques to systems, network, and processes to determine if exhibited behavior is expected., • Ability to travel up to 50%Preferred Skills:, • Experience working with complex Navy surface warfare systems and applications in an operational setting., • ExperienceSystem integration and test experience for tactical applications (Aegis Weapon System, CEC, Link16, etc.)., • Have experience working with Aegis Weapon System or NAVSEA tactical applications., • Demonstrated knowledge in related disciplines (e.g., Software Engineering, IT, Networking)., • Experience running and testing complex SW systems, especially DoD Systems or large distributed SW Solutions., • Experience developing or testing large, complex systems (e.g., DOD related lab environment)., • Experience running codes or scripts in Python, Java, C++ or other languages., • Experience performing test and integration, applying best engineering practices, and executing test methodologies.Competencies:, • Ability to perform concurrent assignments and adapt to changing priorities, • Excellent verbal and written communication skills, • Strong team-centric execution and coordination skillsPay Range*: $74,000 - $116,000 or $90,000 - $150,000This amount may not be reflective of actual compensation that may be earned as pay is dependent on a candidate's experience, skills, and education. The posted range does not include bonuses, commissions, tips, or other benefits. IDT is often looking to place multiple candidates at various levels. Therefore, more than one pay range has been included, commensurate with experience.EEO Statement:IDT is an Equal Opportunity employer.

Job Locations US-CA-San Diego Job ID 2026-6014 Category Maintenance Location US-CA-San Diego Location Name Mission Trails We are growing! Sares Regis Group of Newport Beach, California, is a privately held real estate development, investment and management firm that focuses on commercial properties and multifamily communities in the western U.S. Since its founding in 1993, SRG has developed and acquired more than $7 billion in commercial and residential assets. The company manages a combined portfolio of approximately 25 million square feet of office and industrial space and 42,000 apartment units. OPPORTUNITY: SHORT-TERM MAINTENANCE TECHNICIAN I - SAN DIEGO, CA (6 MONTH DURATION) DAYS/HOURS REQUIRED: TUESDAY - SATURDAY, 8:30AM - 5:30AM Sares Regis Group is seeking an experienced maintenance professional for our beautiful communities, Mission Trails and Driftwood. This is an excellent opportunity for someone looking to grow their career in the property management industry! Duties include but aren't limited to: • Works in turnover and renovation units, as well as responds to maintenance service requests., • Works on external, as well as internal repairs which may include, but is not limited to, drywall repairs, painting, fence and gate repairs, plumbing installation or repairs, appliance repairs, boilers and HVAC systems, and common area clean-up., • Participates in emergency and after hours coverage based on the established schedule or as required., • Sets up and operates machine tools such as lathe, grinder, drill, and milling machine to repair or fabricate machine parts, jigs and fixtures, and tools., • Fabricates and repairs cabinets, counters, benches, partitions, and other wooden structures., • Maintains or assists in maintaining inventory and prepares related paperwork., • Keeps storage facilities and equipment in an orderly, working condition. QUALIFICATIONS • Must have experience in all trades (electrical, plumbing, drywall, paint, appliances, etc.), • Demonstrated knowledge and skill in performing quality work; able to use required tools and machinery; professional interaction with co-workers, residents and vendors; knowledge and continued education of OSHA requirements; knowledge of MSDS requirements appropriate to the scope of work., • Ability to read and interpret service orders and documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to effectively present information and respond to questions from employees, managers, clients, customers, and the general public., • High school diploma or GED, technical school, or three to six months related experience and/or training; or equivalent combination of education and experience., • Excellent customer service skills a must!, • Ability to work weekends required. Salary range is $21.00-$23.00/hour. We offer a competitive compensation package that includes a 401(K) match, rental incentive and renewal compensation, bonuses, and rental discounts depending on location. Regular full-time employees who work between 30-40 hours a week are eligible for medical, dental, vision, other voluntary benefits and vacation accrual. Sick time accrual is provided in accordance with law. PLEASE APPLY ONLINE AT: SARES REGIS CAREERS WEBSITE EQUAL OPPORTUNITY EMPLOYER All positions contingent on completion of successful background screen and drug test.

Oceaneering Technologies (OTECH) develops, manufactures, and operates customized marine systems, shipboard equipment, subsea vehicles, and engineered solutions for commercial and U.S. military vessels. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilical's, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering International Inc. Oceaneering Technologies (OII-OTECH) supports the US Navy's submarine rescue mission through the Submarine Rescue Operations and Maintenance Contract (SROMC). Oceaneering partners with the Navy's Undersea Rescue Command (URC) to provide 24/7 world-wide submarine rescue capability to US, allied and other foreign navy requests to assist disabled submarines (DISSUB) or submersible intervention and rescue. OII-OTECH is seeking an Mechanical Technician who will execute mechanical, life support systems, and hydraulic maintenance and repair work on all submarine rescue assets and supporting equipment. The Mechanical Technician will perform scheduled and corrective maintenance, integration, testing, field installation, and troubleshooting of mechanical, life support, and hydraulic equipment and systems. Work primarily occurs at URC in San Diego and will require travel to various locations in the US, at sea and abroad. ESSENTIAL: • Provide sound and seasoned technical judgement that follows company policies and procedures in meeting SROMC obligations., • Conduct mechanical and hydraulic maintenance and operation of all USN submarine rescue systems and support equipment (SRDRS, SRCFS, ROV, SILOS, LWMS). Maintain rescue teams and systems in the highest state of readiness in order to meet Fleet requirements., • Works within and supports a safety culture that is in compliance with Oceaneering's Life Safety Rules and HSE program., • Working knowledge of applicable technical requirements from NAVSEA SS800-AG-MAN-010/P9290 (Systems Certification, • Procedures and Criteria Manual for Deep Submergence Systems), NAVSEA SS521-AA-MAN-010 (U.S. Navy Diving and Manned, • Hyperbaric System Safety Certification Manual), and American Bureau of Shipping rules., • Be able to document maintenance and operational activities in accordance with applicable procedures to sustain certification of submarine rescue system equipment., • Work within a team to resolve technical issues., • Formulate methods and processes which will increase safety, efficiency and readiness., • Hydraulic, piping, mechanical, and small valve maintenance and repair., • Life support piping systems, oxygen systems and/or diver breathing gas systems maintenance and repair., • Additional duties as assigned. REQUIRED: • High school diploma or equivalent., • Technical Associates Degree or tech trade school preferred., • Minimum two years formal training or four years of progressively responsible, on-scene experience in fabricating, assembling, troubleshooting, maintaining, and repairing hydraulic, life support and mechanical systems, and small valve maintenance., including high pressure gas/liquid power and control equipment (pumps, valves, etc.)., • Able to interpret complex mechanical and hydraulic schematics and drawings., • Skills in use of piping system test sets, flow/pressure meters, and NDT., • Proficient in the use of common hand and power-driven tools including drills, grinders, drill presses, cut saws, etc., • Proficient in hydraulic system operation/repair/maintenance and troubleshooting. Some formal hydraulic system training preferred., • Proficient in the use of fluid and gas test equipment., • Fork-lift, overhead crane, and rigging experience., • Good communication skills and the ability to work as a team player in a fast-paced environment., • Able to work with minimum supervision under a variety of conditions., • A current valid U.S. passport is required., • Must be a U.S. citizen, • Experience with Deep Submergence Systems - Scope of Certification (DSS-SOC) and/or Diving and Manned Hyperbaric Systems - Scope of Certification is considered a plus., • Experience troubleshooting to the component level is preferred., • Experience with MIL-STD-1330 and/or MIL-STD-1622 cleaning and testing standards, • Certified Oxygen Clean Worker or equivalent This position may be expected to qualify: • For Intervention: ROV Pilot/Copilot, ROV Technician, ROV LARS Operator, Crane/Winch Operator, ROV Deck Captain, ROV Tender, SILOS Operator, SILOS LARS Operator, SILOS Technician, SILOS Deck Tender., • For PRMS/SRS RCS Operations: PRM LARS/Umbilical Operator, Umbilical Winch Operator, Master Control Station Operator, Deck Cradle Operator, Diesel Operator., • For SRDRS Operations: SDS Auxiliary Van Operator/Technician, Gas Rack Operator/Technician, PFM Operator/Technician., • For SRCFS Operations: SRC Line and Umbilical Operator, SRC Technician., • For LWMS Operations: LWMS Line Handler, LWMS Technician. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. Base pay rate for this position : $28 - 39/Hour. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Service Lead Sunstate Equipment Co.: Where Safety and People are Core Values! We take care of our People and it shows! Location: El Cajon, CA 92020 Pay Range: $35.50 - $41.65/Hr, dependent on experience. Description: The Service Lead's daily primary objective is to assist the Branch Manager and/or Service Manager with shop flow and service quality to ensure timely, accurate service and repair to the rental and delivery fleet. Prioritize and assign repairs of all "downed" equipment to ensure it is quickly brought back into service within company guidelines. The position also consists of performing regular preventative maintenance and major repairs approximately 75% of the time. Ensure that all mechanics properly and timely complete documentation, monitor part orders and expenses. Monitor and provide appropriate safety, process, and technical performance and training. Provide frequent feedback to service leadership on shop activities and individual performance. Duties and Responsibilities: • Collaborate to establish daily work priorities of shop and yard employees, • Facilitate effective communication with shop via huddles, meetings, and one-on-one interactions, • Assist with key decisions regarding all major equipment repairs, ensuring that any warranty or customer damage issues are promptly addressed and communicated to the Service and/or Branch Manager, • Ensure adequate availability of essential shop supplies for seamless operations, • Serve as a liaison between the shop and office, addressing equipment issues such as breakdowns, customer damage, etc., • Demonstrate and instruct advanced troubleshooting /diagnoses and repair techniques for equipment, • Demonstrate and provide training on repairing gas and diesel engines, complex hydraulic systems, electrical systems, and drive trains to include manual and power shift transmissions on equipment and trucks, • Provide instruction in welding techniques including electric arc 'stick', gas welding and brazing, • Conduct thorough inspections, servicing, testing, and refueling equipment prior to tagging it "Ready to Rent", • Ensure upkeep of all decals, safety warnings and company ID stickers, • Maintain accurate records documenting equipment maintenance and repair, including field service paperwork, • Utilize part books and requisition forms to accurately order parts as needed, • Maintain and ensure a safe working environment, • Maintain a clean and orderly shop environment, particularly in personal work areas, by returning tools to designated location, clearing benches, and sweeping or mopping the shop area at the end of each workday, • May assist with general yard person duties including customer assistance, • May assist with the washing and staging of equipment, • May deliver or pick-up equipment to or from job sites as needed, • Promptly report safety incidents/violations to Branch and/or Service Manager, • Assist in training new mechanics, • Maintain company vehicles in accordance with established standards, • May perform other duties as assigned Qualifications/Requirements: • Consistently adhere to safety policies, procedures, and guidelines, • Possess mechanical knowledge of construction equipment, • Ability to demonstrate basic computer and typing skills, • Ability to grasp and apply new information quickly, • Ability to focus on details and complete tasks with accuracy, • Ability to read, write, and speak English, bilingual is a plus, • Ability to grasp and apply new information quickly, • Full range of motion, agility, and strength to lift one's body into/out of large vehicles, trailers, equipment., • Capable of normally lifting 25 lbs., frequently lifting 50 lbs., and occasionally lifting 90 lbs. with the assistance of mechanical aid or lift assistance, • Minimum age of 21 years required to drive Company vehicles, requires a valid driver license and ability to maintain a good driving record qualifying to safely drive a Company vehicle for work purposes Why Choose Us? At Sunstate, every employee is valued, respected, and fairly compensated. More importantly, every employee has a voice that deserves to be heard. We are working hard to challenge the typical ways of business and develop an environment where our employees feel safe, comfortable, and look forward to coming to work. No matter which location you visit, you can't help but feel the close-knit work-family environment. We have strategically and organically grown our company from within, promoting from the ground up and providing employees with opportunities to explore their different passions within our own walls. This culture allows our people to develop valuable, marketable skills they can use throughout their career. Plus, with benefits like Baby Bonding, My Holiday vacation time, and discounts on everything from movie tickets to cell phone bills, we're constantly evolving our resources to provide our people with tools to make their lives easier! Be YOU at Sunstate At Sunstate Equipment, we are actively fostering a workplace culture where individuals of all identities and life experiences feel genuinely valued, respected, and appreciated. As a proud equal-opportunity employer, we wholeheartedly welcome candidates from diverse backgrounds and cultures. We recognize and celebrate the unique perspectives they bring, with the understanding that they are the fuel for the innovative ideas that drive the evolution of our industry. Sunstate Equipment Co. is an Equal Opportunity Employer A Drug Free Workplace and Participates in E-Verify #LI-AG1 #WESTIND

General Job Description: Under the direction of the Regional Service Sales Manager, this position will be primarily responsible for matching ACCO as the premier service and maintenance provider with a select clientele for the purpose of providing them maintenance solutions and increasing ACCO's market share in the area. Essential Duties and Responsibilities: • Recommend and attend sales and technical training courses, as approved by management., • Prospect, cold-call and network to develop leads and sales opportunities., • Identify, pre-qualify and call on non-contract customers to introduce our company and services we offer., • Write proposals and contracts for maintenance to the above-described customers., • Learn maintenance estimating software., • Obtain immediate technical abilities in discussing HVAC equipment and their maintenance requirements., • Using acceptable software and other internal resources, prepare estimates for those maintenance contracts you will be proposing., • Follow-up on sales leads and lists generated by management and others., • As scheduling allows, accompany field maintenance technicians as they perform preventive maintenance for contract customers., • Minimum of five years of experience in the marketing and sales of services related to technical products and/or systems. Experience in the HVAC industry is a plus., • Must have an understanding of customer needs and service delivery., • Strong interpersonal relationship skills and the ability relate well with a variety of personality types., • The ability to work well with others and in a team environment., • Be proficient with contact management software or system., • Proven ability to prospect and network to generate leads and sales opportunities., • Self-discipline to maintain a steady, strong work ethic in a flexible work environment., • Client entertainment, including lunches, ballgames, gifts, etc., • Experience selling and presenting intangible service products., • Strong organizational and time management skills., • Willingness and ability to work as long as it takes meet deadlines., • Proactivity / Initiative: Recognizes what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision., • Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity., • Insight: The ability to gather and make sense of information that suggests new possibilities., • Engagement: Shows a knack for using emotion and logic to communicate a persuasive vision and connect with people., • Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner., • Big Picture: Understands and contributes to organizations' short- and long-term business strategy. On a personal level has independently developed a vision for short- and long-term career success., • Motivation / Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals, takes responsibility and shows personal humility., • Technical Curiosity / Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feed, back; demonstrating an openness to learning and change. (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) • Regularly lift, push, pull, carry, and/or move up to 10-15 pounds, and occasionally up to 30 pounds., • Regularly required to walk, stand, and sit., • Frequently use hands and fingers to handle, grasp, and feel., • Regularly talk, hear, and use specific vision abilities of Close vision and Distance vision., • Frequently operate computer keyboard, telephone, and mobile device., • Operate and drive a motor vehicle., • Frequently required to reach with hands and arms and at times reach above shoulder height to access storage cabinets., • Occasionally required to balance, stoop, kneel, crouch, and/or crawl (for reviewing a job site and/or of filling photocopier/printers)., • Ability to climb both fixed and extension ladders and raise a roof hatch., • Possess a range of motion sufficient to look into the interior of air conditioning equipment. Monday to Friday, 8:00 am to 5:00 pm Travel: 25% of the time to and from the primary office to regional branch offices and customer job site. Competitive Wages: $80,000 to $120,000 annually. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others. The offered wage or salary is only one aspect of an employee's total compensation. #ACCO #LI-RN1

Number ICIMS-2025-9301 Job function QA&RA Job type Full-time Location Werfen - San Diego - AID - 9900 Old Grove Road San Diego, California 92131-1638 United States Country United States Shift 1st Introduction Werfen Werfen is a growing, family-owned, innovative company founded in 1966 in Barcelona, Spain. We are a worldwide leader in specialized diagnostics in the areas of Hemostasis, Acute Care Diagnostics, Transfusion, Autoimmunity, and Transplant. Through our Original Equipment Manufacturing (OEM) business line, we research, develop, and manufacture customized assays and biomaterials. We operate directly in 30 countries, and in more than 100 territories through distributors. Our Headquarters and Technology Centers are located in the US and Europe, and our workforce is more than 7,000 strong. Our success comes from a specific focus in these rapidly evolving diagnostic areas, our commitment to customers, and our dedication to innovation and quality. We're passionate about providing healthcare professionals the most valuable and complete solutions to improve hospital efficiency and enhance patient care. Overview Job Summary The Document Control Specialist III guides, executes, and improves Document Control processes including document changes, quality records control, labeling creation, SAP master data entry, and training record maintenance activities. This role ensures compliance with organizational standards and regulatory requirements and improves the efficiency and quality of Document Control processes. The Document Control Specialist III demonstrates subject matter expertise in document control processes and regulatory requirements. The position is responsible for carrying out activities and facilitating processing associated with change orders, SAP training sessions, quality plan tasks, document and record processing, metrics, artwork for labeling, and other tasks to achieve department objectives. The Document Control Specialist III works closely with department management and other Quality teams to ensure activities and tasks are accurately and efficiently completed and also works independently; uses professional judgement to make decisions with in areas of authority. Completes work in accordance with Inova Quality Management System. Responsibilities Key Accountabilities The main activities for this role include: • Document and Data Processing and Entry - Initiate and process change orders: review change orders verbiage and content for errors, inconsistencies, and incompleteness; confirm documents and records comply with standardized formats and file naming conventions; and affected items; confirm approvers are appropriate to the change; communicate proactively with stakeholders to ensure efficiency of change order processing; work with change owners and reviewers on required corrections and clarifications; monitor aging change orders and facilitate issues resolution in a timely manner; ensure completion of implementation actions prior to effective status of the change; and coordinate periodic review. Maintain signature and delegation records. Create and maintain SAP master data. Ensure physical controlled copies are maintained at point of use., • Document and Record Lifecycle Management- Optimize processes while performing creation, acceptance, review, storage, distribution, and archiving controlled documents and records from initiation through obsolescence and disposal., • Department Procedures - Create and revise document and record lifecycle management, training, and product labeling SOPs, work instructions, checklists, forms, and templates. Maintain accuracy and compliancy of procedures., • Process Improvement - Lead and implement Document Control department process improvements for accuracy, efficiency, effectiveness, and cycle times. Make process corrections based on process data trends. Represent Document Control in cross-functional projects., • Training & Support - SME for training in Document Control department activities and requirements. Develop, deliver and maintain training materials for document control practices to the organization. Train new team members to procedures. Assist in creation of training sessions, and follow-up on completion of training by users., • Metrics & Reporting - Maintain tracking data and reporting documents, labeling, and training metrics, reports, and dashboards. Analyze and respond to trends., • Product Labeling - Optimize processes while performing creation, review, maintenance, and archiving product labeling from initiation through obsolescence. Print restricted product labeling., • Quality Records Management - Optimize processes while performing scanning, filing, archival and disposal of paper and electronic quality records through required retain durations as well as processing quality records for off-site storage., • Audit Support - Support internal and external audits and regulatory inspections. At minimum, pull requested audit documents and records, respond to auditor queries, represent Document Control in audits and inspections., • Compliance - Follow applicable Werfen standard operating procedures (SOPs), national and international and other Quality System regulations, ISO standards, as well as applicable Environmental Health & Safety, Human Resources and all other regulatory and administrative policies.., • Perform other duties and responsibilities as assigned. Networking/Key relationships • Quality Teams, • Regulatory Teams, • Manufacturing Teams, • Operations Teams, • Marketing Teams, • Supply Chain Teams, • Legal & Human Resources Minimum Knowledge & Experience required for the position: Education: Bachelor's degree in a relevant field (e.g., Life Sciences) or equivalent experience required. • Advanced knowledge of document lifecycle management and maintaining documents within quality system requirements., • Advanced knowledge of Quality Management System regulations ISO 13485, and related standards as pertain to document, quality record, training records, labeling artwork control., • Advanced experience in drafting, updating, and implementing SOPs, work instructions, forms, templates, and other QMS controlled documents., • Advanced experience in document control configuration and document lifecycle management within a regulated quality management system., • Advanced experience with SAP for document control and material master management., • Experience leading departmental projects as well as providing representation in interdepartmental projects., • Experience with quality-related training systems., • Experience with computerized information systems (e.g., ERP, eDMS, LMS) required. Skills & Capabilities: • Attention to Detail & Accuracy: Thorough attention to detail and commitment to accuracy; ensures completeness and precision in documentation., • Organization & Time Management: Proficient organizational skills with the ability to manage multiple priorities and meet deadlines in a fast-paced environment., • Communication: Proficient written and verbal communication skills in English; able to effectively communicate and train on document control requirements and processes., • Collaboration & Interpersonal Skills: Advanced interpersonal skills for cross-functional collaboration; able to influence and negotiate to achieve optimal outcomes., • Customer Service Orientation: Responds promptly to requests and drives stakeholder satisfaction., • Process Improvement: Ability to analyze current processes, identify gaps, and implement effective solutions., • Adaptability: Ability to support changing business needs and work effectively in dynamic environments., • Problem-Solving: Proficient in identifying and resolving complex issues and problems; seeks help and guidance for cross-functional issues and problems. Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to communicate. Must be able to detect, identify and inspect scientific data. The employee will be required to stand and/or walk up to 8 hours per day and/or sit for up to 8 hours per day. Must be able to use hands to feel objects, including keyboard, telephone and pipettes or other lab equipment. May need to reach with hands and arms, climb stairs, balance, stoop, kneel or crouch. Will be required to talk and hear and have specific vision abilities, including close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. May occasionally have to lift and/or move up to 25 pounds. The noise level in the work environment will vary but is usually moderate. This position is very active and requires varying levels of mobility. The annual base salary range for this role is currently $24.00 range to $34.00 range. Individual employee compensation will ultimately depend on factors including education, relevant experience, skillset, knowledge, and particular business needs. This role is eligible for medical, dental, and vision insurance, 401k plan retirement benefits with an employer match, as well as paid vacation and sick leave. Our sales roles are eligible for participation in a commission plan and our management, and select professional roles, are eligible for a performance-based bonus. If you are interested in constantly learning and being challenged on a daily basis we encourage you to submit your resume or CV. Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen strictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact for assistance. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team. If you are interested in constantly learning and being challenged on a daily basis we encourage you to submi Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen s trictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact for assistance.t your resume or CV. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic II - Airframes (Plus Up) Location San Diego, CA Job Posting 113846 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM - 41 North Island Salary Range $45.27/Hour Posting Date 01/28/2026 Union No FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: As an Aircraft Mechanic II (Airframes) you will be responsible for maintaining and repairing various aircraft systems, including engines, avionics, hydraulics, armament, landing gear, and more. You will also perform inspections, troubleshooting, and repairs for both structural and functional components, while managing other mechanics to ensure timely task completion Primary responsibilities include but are not limited to the following: * Aircraft Maintenance: Repair and rebuild aircraft systems, including engines, avionics, hydraulics, and structural components. Perform troubleshooting, inspections, and repairs as required. * Leadership: Manage and supervise mechanics, ensuring timely completion of tasks and compliance with safety standards. You will also approve time cards for team members. * Technical Expertise: Interpret technical manuals and data to determine repair methods. Perform various types of inspections on engines, systems, and components. * Specialized Areas: You may specialize in specific areas, such as engine, airframe, electrical, or armament repair. You will be responsible for modifications, inspections, and keeping aircraft in safe, mission-ready condition. * Support Equipment Compliance: Ensure that Technical Directives (TDs) are followed for aircraft maintenance and equipment management. Ensure compliance with safety and quality standards. * Safety & Quality: Ensure that all safety and quality procedures are adhered to, including hazardous materials handling, FOD prevention, and completing required training. * Certifications: CDQAR (Collateral Duty Quality Assurance Representative) Page 2 of 3 Qualifications and Experience: * Education & Experience: High school diploma or equivalent, with at least eight (8) years of recent experience in rotary aircraft maintenance, specifically with the H-60 series (including experience as a CDQAR/QAR). * MH60-R experience is preferred, along with prior experience in U.S. Navy aircraft maintenance. * Leadership: At least two years of management experience overseeing a team of mechanics. * Technical Knowledge: Ability to interpret complex technical manuals, perform inspections, and use specialized tools/equipment. * Certifications: CDQAR (Collateral Duty Quality Assurance Representative) equivalent experience.and complete aviation ordnance qualifications. * Ability to obtain a Tier 3 Background Investigation and possibly a Secret Clearance. * Shift Flexibility: Availability to work all shifts as needed based on flight schedules and task requirements. * Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards Additional Requirements: * Ability to work with foreign cultures and languages. * Successfully pass a pre-employment drug screen and medical examination. * Ability to meet physical requirements for the position. * Compliance with safety, quality, and environmental regulations. * Must be able to handle and dispose of hazardous materials as required. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing for a long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. Page 3 of 3 * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

Job Locations US-CA-San Diego Job ID 2025-5305 Category Maintenance Location US-CA-San Diego Location Name San Diego, CA We are expanding in San Diego! Sares Regis Group of Newport Beach, California, is a privately held real estate development, investment and management firm that focuses on commercial properties and multifamily communities in the western U.S. Since its founding in 1993, SRG has developed and acquired more than $7 billion in commercial and residential assets. The company manages a combined portfolio of approximately 25 million square feet of office and industrial space and 42,000 apartment units. OPPORTUNITY: MAINTENANCE TECHNICIAN II - SAN DIEGO, CA Sares Regis Group is seeking an experienced maintenance professional for our beautiful communities! This is an excellent opportunity for someone looking to grow their career in the property management industry! Duties include but aren't limited to: • Works in turnover and renovation units, as well as responds to maintenance service requests., • Works on external, as well as internal repairs which may include, but is not limited to, drywall repairs, painting, fence and gate repairs, plumbing installation or repairs, appliance repairs, boilers and HVAC systems, and common area clean-up., • Participates in emergency and after hours coverage based on the established schedule or as required., • Sets up and operates machine tools such as lathe, grinder, drill, and milling machine to repair or fabricate machine parts, jigs and fixtures, and tools., • Fabricates and repairs cabinets, counters, benches, partitions, and other wooden structures., • Maintains or assists in maintaining inventory and prepares related paperwork., • Keeps storage facilities and equipment in an orderly, working condition. QUALIFICATIONS • Must have 2 years of experience in all trades (electrical, plumbing, drywall, paint, appliances, etc.), • Demonstrated knowledge and skill in performing quality work; able to use required tools and machinery; professional interaction with co-workers, residents and vendors; knowledge and continued education of OSHA requirements; knowledge of MSDS requirements appropriate to the scope of work., • Ability to read and interpret service orders and documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to effectively present information and respond to questions from employees, managers, clients, customers, and the general public., • High school diploma or GED, technical school, or three to six months related experience and/or training; or equivalent combination of education and experience., • Excellent customer service skills a must!, • Ability to work weekends required. Salary range is $24.00-$29.00/hour. We offer a competitive compensation package that includes a 401(K) match, rental incentive and renewal compensation, bonuses, and rental discounts depending on location. Regular full-time employees who work between 30-40 hours a week are eligible for medical, dental, vision, other voluntary benefits and vacation accrual. Sick time accrual is provided in accordance with law. PLEASE APPLY ONLINE AT: SARES REGIS CAREERS WEBSITE EQUAL OPPORTUNITY EMPLOYER All positions contingent on completion of successful background screen and drug test.

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. The Role QuidelOrtho has implemented a state-of-the-art SAP solution with the S/4 HANA platform, GTS, Simple Finance, APO, BI/ BW, ARIBA, Hybris and BPC with SAP Rapid Deployment solutions. As the organization is embarking on extending functional use of these SAP Modules and launching other cutting-edge tools, we are looking for a SAP Logistics and Operations Lead for design, implementation and ongoing support of core SAP functionality and best of breed applications for Logistics, Plant Maintenance, Quality Management and Manufacturing execution. The position is a part of the Supply Chain team of QuidelOrtho that is responsible overall for ERP system implementation and support for Supply Chain Planning, Procure to Pay, Master Data, Logistics Execution, Plant Maintenance, Manufacturing Operations and Quality Management functions. This position is remote eligible, with a strong preference for candidates who reside in Rochester, NY, Pompano, FL or Raritan, NJ. The Responsibilities * Subject matter expertise in SAP Logistics Execution, Quality Management, Production Planning and execution modules. * Cross functional integration experience with Sales Distribution, Finance and other functions. * Exposure to SAP Plant Maintenance, Quality Management, and Extended Warehouse Management functions is preferred. * Triages Business challenges to Design and develop SAP Supply chain solutions through creating requirements definition documentation and functional specifications by accurately capturing business needs using advanced business processes. * Creates Business and System Process flow diagrams to document current and future business environment, validates with the customer and aligns/informs with project stakeholders. * Responsible for design validation, configuration, testing, implementation, end user training, functional/technical support and maintenance. * Hands-on role to configure and maintain SAP Logistics processes supporting Process manufacturing, Inbound / Outbound Logistics execution, Shop floor Integrations, production planning/scheduling, Quality management, and Plant Maintenance. * Work closely with project teams to ensure integrated system solutions. * Function as key member of project teams throughout full project lifecycle (blueprinting, realization, testing, final prep, go-live, and support) including the operate phase. * Provide guidance to the businesses on appropriate use of the SAP system and data. * Demonstrate problem solving ability that allows for effective and timely resolution of end user tickets for system issues including but not limited to production outages, break/fix, enhancement, and end user inquiries. * Maintain proper change control for the SAP system. * Perform other work-related duties as assigned. * The Individual Required: * Bachelor's degree preferably in Computer Science, Information Technology, Mathematics, Engineering or Business or equivalent experience. * Minimum of 5 years in a technical IT role with SAP full lifecycle experience developing, configuring and implementing business applications. * Experience with SAP PP/QM modules and integration with WM / EWM required, SAP Plant Maintenance experience is preferred. * A proven track record of performance with increasing technical responsibility and demonstrated ability to adapt and thrive within a fast-paced and dynamic environment. * Strong verbal and written communication skills with an ability to express complex technical concepts in business terms. * Effectively communicate & coordinate project work and related information to cross functional/international IT team members and leadership. * Challenge existing processes, concepts or requirements and identify and assess new techniques / technology that can add value to the business/IT. * Strong SAP Logistics execution skills in a Process or Discrete manufacturing. * Experience working with SAP Technical ABAP, Integration, User interface. * Understanding and experience with EDI/ALE connectivity and RFC based integration across SAP modules. * This position is not currently eligible for visa sponsorship. Preferred: * Prior experience in the life sciences industry * Knowledge of Digital Supply Chain, Supply Chain Analytics and Supply Chain Master data Management The Key Working Relationships Internal Partners: * All levels of the organization. External Partners: * Vendors, customers and contractors. The Work Environment No strenuous physical activity, though occasional light lifting of files and related materials is required. 30% of time in meetings, working with team, or talking on the phone, 70% of the time at the desk on computer, doing analytical work. Minimal travel required. Travel includes airplane, automobile travel and overnight hotel. Salary Transparency The salary range for this position takes into account a wide range of factors including education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on the facts and circumstances of each case. The salary range for this position is $125,000 to $145,000 and is bonus eligible. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time), and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. Equal Opportunity QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform the duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ___.

Olgoonik is an Equal Opportunity Employer Overview: Perform full range of duties in the receipt, stowing, kitting, and issuing of material. Ensure items being stowed or shipped meet requirements of MIL-STD 129N. Must use anti-static devices. Provide first article inspection, if required, as depot contract agreement. Comply and input Distribution Standard System (DSS) data, count, sort, weigh incoming articles to verify receipt of items on requisition or invoice. Primary Responsibilities: • Identifies, examines, classifies, accepts, rejects, and disposes of material as per DLA regulations. Examinations may be visual or require measuring devices., • Loads material on and off skids, pallets, and stands., • Prepares labels as required., • Fills Materiel Request Orders (MROs) on a timely basis., • Prepares various reports relating to distribution., • Operates tools and equipment in performance of duties., • Receives data from, and input data to, DSS and other automated systems., • Operates MHE as assigned and hold appropriate license., • Counts, weighs, records data, applies tags and labels., • Makes preventive maintenance adjustments to equipment., • Ensures integrity of tools and equipment inventory., • Performs all other duties as assigned. Supervisory Responsibilities: • N/A Education and/or Experience: • High school diploma or GED required., • Two plus years of college or technical school highly desirable. (May substitute experience for education on a year-by-year basis)., • Minimum one-year general experience., • Minimum of one-year specific experience in material handling, supply, distribution, inspection, Quality Assurance (QA), or related area. Knowledge, Skills, and Abilities: • Must possess knowledge of inspection/examination procedures for material., • Must possess knowledge of research techniques for unmarked/defective material requiring identification., • Must be able to read contractual specifications, drawings, prints, schematics, and photographs., • Must be proficient with Microsoft Suite products including, Word, Excel, Access and E-mail business software., • Must demonstrate a good attitude and ability to work as a member of a Team., • Position requires self-motivation and the ability to work effectively under a minimum of supervision., • Must be able to multi-task efficiently, work in a fast-paced environment on multiple projects and have a strong attention for detail. Certificates, Licenses, Registrations: • None Required. Security Clearance: • N/A Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: General office environment. Travel may be required based on business demands. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Oceaneering Technologies (OTECH) develops, manufactures, and operates customized marine systems, shipboard equipment, subsea vehicles, and engineered solutions for commercial and U.S. military vessels. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Oceaneering International Inc. Oceaneering Technologies (OII-OTECH) supports the US Navy's submarine rescue mission through the Submarine Rescue Operations and Maintenance Contract (SROMC). Oceaneering partners with the Navy's Undersea Rescue Command (URC) to provide 24/7 world-wide submarine rescue capability to US, allied and other foreign navy requests to assist disabled submarines (DISSUB) or submersible intervention and rescue. OII-OTECH is seeking an Electrical Technician who will execute electrical/electronic maintenance and repair work on all submarine rescue assets and supporting equipment. The Electrical Technician will perform scheduled and corrective maintenance, integration, testing, field installation, and troubleshooting of electrical equipment and systems. Work primarily occurs at URC in San Diego and will require travel to various locations in the US, at sea and abroad. ESSENTIAL: • Provide sound and seasoned technical judgement that follows company policies and procedures in meeting SROMC obligations., • Conduct electrical and electronic maintenance and operation of all USN submarine rescue systems and support equipment (SRDRS, ROV, SILOS, LWMS). Maintain rescue teams and systems in the highest state of readiness in order to meet Fleet requirements., • Works within and supports a safety culture that is in compliance with Oceaneering's Life Safety Rules and HSE program., • Working knowledge of applicable technical requirements from NAVSEA SS800-AG-MAN-010/P9290 (Systems Certification, • Procedures and Criteria Manual for Deep Submergence Systems), NAVSEA SS521-AA-MAN-010 (U.S. Navy Diving and Manned, • Hyperbaric System Safety Certification Manual), and American Bureau of Shipping rules., • Be able to document maintenance and operational activities in accordance with applicable procedures to sustain certification of submarine rescue system equipment., • Resolve technical, procedural, and schedule issues., • Formulate methods and processes which will increase safety, efficiency and readiness., • Soldering, electrical assembly, power/comm cable testing, fiber optics termination and troubleshooting., • Some light mechanical assembly associated with submarine rescue systems and supporting equipment, including ROV electronic enclosures and diesel generators., • Use electrical meters, high voltage meggers, fiber optic sources and power meters, and similar test equipment., • Desirable for candidate to be familiar with the operation and use of oscilloscopes, electrical and optical time domain reflectometers (TDRs), logic and frequency analyzers, spectrum analyzers., • Additional duties as assigned. REQUIRED: • High school diploma or equivalent., • Technical Associates Degree or tech trade school preferred., • Minimum two years formal electronics training or four years of progressively responsible, on-scene experience in electrical/electronic assembly., • Able to interpret complex electrical schematics., • Above average skills in soldering and electrical assembly., • Electrical/electronic assembly/inspection and/or soldering certificate (IPC-WHMA-620, IPC J-STD, etc.) desired, or equivalent skill in lieu of certificate., • Experience with cable assembly/wire harness assembly., • Experience with fiber optic cable assembly, troubleshooting and repair., • Good communication skills and the ability to work as a team player in a fast-paced environment., • Able to work with minimum supervision under a variety of conditions., • A current valid U.S. passport is required., • Must be able to obtain security clearance., • Experience with PWB/PCB assembly including thru-hole and surface mount is considered a plus., • Experience with Deep Submergence Systems - Scope of Certification (DSS-SOC) is considered a plus., • Experience troubleshooting to the component level is preferred., • Knowledge of shipboard wiring and/or subsea systems (ROVs/AUVs) is preferred. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. The Base Pay rate for this position is $28.90 - $39.01/Hour All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Community: The Resort at Encinitas Number of Units: 198 If you're driven and looking for a collaborative workplace that makes a difference, you just might be a fit for Fairfield! We are a leader in the multifamily housing industry and we're passionate about creating exceptional apartment living. As we continue to grow, we're dedicated to investing in our people. Our culture is built on trust, support, and the drive to do great work. Whether you're launching your career or bringing years of experience, you'll find opportunities to make an impact, develop your skills, and be part of something bigger. Come build your future with us! As a Floating Maintenance Technician II, you'll ensure the smooth operation and upkeep of multiple residential communities throughout the San Diego, CA region. From repairing electrical and plumbing systems to preparing apartments for new residents, your work will directly impact the quality of life for our residents. Below is a snapshot of what this role is all about. While there is more to it, this is the core focus. • Perform daily maintenance and repairs in electrical, plumbing, and appliances, • Respond promptly to maintenance requests, • Troubleshoot and resolve technical issues, • Prepare vacant apartments for new residents using the Make Ready Checklist, • Ensure units meet Fairfield quality standards, • Inspect buildings and grounds for safety and cleanliness, • Follow safe work practices and participate in training, • Respond to on-call emergencies, • Communicate with vendors and contractors, • Report inventory needs and potential liabilities We're all about creating communities that people are proud to call home. Being a part of Fairfield means more than a rewarding career with personal growth. It's a partnership, working alongside colleagues in an open-dialogue environment that encourages growth and the sharing of ideas. We know that our associates are a key ingredient to our success, and we're proud to reflect that in our culture. • Driven by Vision: We are a vertically integrated operator and investment manager in the multifamily sector with in-house development, construction, acquisition, and property and asset management services. As we continue to grow, we want you to grow with us., • Career Growth & Learning: Fairfield values new ideas at every level. We offer training, coaching, and mentoring to help associates develop their careers and inspire them to create change for the better., • Culture of Collaboration: Enjoy a professional, supportive environment where we work together to drive meaningful impact., • A Company that Cares: We are proud to offer robust benefit packages with a focus on both quality of care and affordability. We offer competitive compensation plans, 401(k) matching, and paid time off, including sick days and volunteer time off (VTO) to support causes that matter to you., • High school diploma or equivalent required, • Valid Driver's License is required, • Minimum one year of previous experience in property management maintenance, other building maintenance, or related trade required, • Ability to read, write, understand, and communicate in English, • General computer skills, including operating a mobile device, • Strong attention to detail, organizational, time-management, and problem-solving skills, • Superior customer service skills, including the ability to manage difficult customers and situations, • Working knowledge of plumbing, electrical, and appliance repair, • Professional verbal and written communication skills, • Ability to work independently, • Ability to be on-call for after-hours emergencies, • Ability to work a flexible schedule, including weekends, evenings, and holidays Ready to make an impact? Apply today! #LI-MARSHALL Estimated Rate of Pay: $29.14 - $31.93 This position is non-exempt; the range above reflects hourly rates. The pay range displayed for this position is determined by skills and experience required, location and job complexity*. Potential job offers may vary based on the skills, education, and experience an individual candidate holds. This range reflects base rate only, and does not include allowances, perks, commissions or bonuses applicable to this position (if any). In addition to base salary, Fairfield offers all full time associates the following, upon meeting eligibility requirements: • Paid time off, paid holidays and sick days, paid time off for volunteering activities (optional), • Matched 401(k), • Medical, dental & vision insurance, • Flexible spending account, • Life insurance, • Pay range is a calculation based on a midpoint price. Fairfield complies with all wage and hour laws, including minimum wage and salary exempt requirements. Job duties for this position include: work safely and cooperatively with others, including supervisors; adhere to performance standards despite stressful conditions; communicate effectively and respectfully to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations. The material duties of this position involve access to our residents' homes, both when they are present and when they are not. The material duties of this position also involve access to the confidential information of our residents, including their financial information. Criminal history may have a direct, adverse, and negative relationship with this job duty. Pursuant to the Los Angeles, San Francisco, and San Diego County Fair Chance Ordinances, the California Fair Chance Act, and any other applicable law, we will consider for employment qualified applicants with arrest and conviction records.

General Job Description: This position will collaborate closely with a dedicated Project Manager, reporting to the Sales Manager, and be responsible for the technical coordination of assigned projects. This includes fostering clear and consistent communication among all disciplines and project team members, including clients, architects, and vendors. This role offers the opportunity to further hone your expertise in estimating, scheduling, and design within our dynamic design-built construction process, leveraging the latest technologies and BIM methodologies. Supervises: None Essential Duties & Responsibilities: Assist the Project Manager with the following: • Writing of proposals, letters, memos, subcontracts, change orders, and other documents related to project execution., • Manage and/or significantly contribute to the development, maintenance, and submission of critical project documents including: RFIs, Submittals, Procurement Logs, Shop Drawings, etc. under the Project Manager's direction., • Coordination of and participation in regular meetings both internal and external (i.e. project kickoff meetings, BIM meetings, schedule meetings, etc.)., • Estimating tasks such as performing takeoffs, soliciting quotes from vendors and subcontractors, compiling complete bid estimates, and developing change order packages., • Management of job progress and quality onsite as required, including leveraging your design and construction expertise in a hands-on capacity to solve emergent operational and installation challenges., • Provide interpretation of technical plans and specifications., • Purchasing processes including vendor and subcontractor buyout, procurement tracking, and delivery of purchased items., • Project financial management responsibilities such as installation tracking, labor forecasting, invoice review, billing development, etc., • Job closeout efforts such as submission of O&Ms, Commissioning, As-Builts, Warranty processing, etc., • Collaborate with the Project Management team to keep them informed on all issues affecting project timeline and budget. Escalate potential problems to the Project Manager to help drive solutions to complete resolution., • Utilize ACCO standard Engineering technologies, provide technical support for the construction effort including participating in the planning and design, interpretation of the design, value engineering and alternate solution reviews, etc., • Develop and maintain viable relationships with our partners outside of ACCO including customers, prime contractors, trade partners, subcontractors, and suppliers., • Foster a strong relationship with ACCO's internal departments (i.e. Construction, Fabrication Shops, Engineering, Accounting, Purchasing, Legal, etc.), • BS in Engineering; Construction Management, or related field. Mechanical and/or related engineering concentration strongly preferred., • Experience and Career Progression: Progression from Project Engineer I to Project Engineer II, III, or a Senior role is based on performance, experience, and demonstrated leadership potential., • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Project), • Proactivity/Initiative: Recognizes and anticipates what needs to be done and accomplishes it in a manner appropriate for one's level/position and with minimal supervision., • Perseverance: Shows the wherewithal to fight for difficult goals despite challenges and to bounce back from adversity., • Insight: The ability to gather and make sense of information that suggests new possibilities., • Engagement: Shows a knack for using emotion and logic to communicate a persuasive vision and connect with people., • Teamwork: The ability to effectively work toward common goals with others by supporting, encouraging, and sharing information in an authentic and approachable manner., • Big Picture: Understands and contributes to organizations' short- and long-term business strategy. On a personal level has independently developed a vision for short- and long-term career success., • Motivation/Dedication: Commits to excellence in pursuing unselfish goals. Initiates action with collective goals, takes responsibility, and shows personal humility., • Technical Curiosity/Willingness to Learn: Interest in seeking out new experiences, knowledge, and candid feedback; demonstrating an openness to learning and change. (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.) • While performing the duties of this job, the employee is regularly required to sit, use hands to operate a computer keyboard and telephone, talk, and listen., • The employee frequently reaches with hands and arms, and at times reaches above shoulder height to access storage cabinets. The employee is occasionally required to stand, walk, climb, or balance, and stoop, kneel, crouch, or crawl (for purposes such as filling photocopiers/printers)., • Specific vision abilities required by this job include close vision and distance vision., • The employee must occasionally lift and/or move up to 10 pounds and occasionally lift and/or move up to 20 pounds., • While performing the duties of this job, the employee is regularly required to sit, use hands to operate a computer keyboard and telephone, talk, and hear., • The employee frequently reaches with hands and arms, and at times reaches above shoulder height to access storage cabinets. The employee is occasionally required to stand, walk, climb, or balance, and stoop, kneel, crouch, or crawl (for purposes such as filling photocopiers/printers)., • Specific vision abilities required by this job include close vision and distance vision. This is a non-exempt position, Monday through Friday. Work hours begin and end between 6:00 am and 5:00 pm, with a one-hour break for lunch and two breaks. Eight hours per day are required, and occasional overtime may be necessary for business needs. Travel: Based on business needs to and from the primary office to regional branch offices & job sites. Varying work in varying locations. Competitive Wages: $28.84 to $57.69 per hour. Applicants please note that actual compensation is determined by several factors that are unique to each candidate, including but not limited to job-related skills, depth of experience, certifications, relevant education or training, and specific work location, among others. The offered wage or salary is only one aspect of an employee's total compensation. #ACCO #LI-CL1

Olgoonik is an Equal Opportunity Employer Overview: Contingent Upon Contract Award Directly controls all operational departments. Interfaces with all functional elements to establish and modify processes, anticipate or solve problems, internal customer needs and meet all Acceptable Performance Level (APL) metrics. This position is contingent upon contract award. Primary Responsibilities: • Have full authority to act for the Contractor on all matters relating to Contract Performance., • Provide overall supervision for the Contractor employees to include, planning and managing the contract professionally; coaching and mentoring supervisors and leads to ensure that work is scheduled properly to obtain maximum use of resources; ensuring that accurate and timely reports are provided; effective supervision to prevent inefficient or wasteful methods in the performance of services ordered; and execute cost saving factors and quality controls to ensure work is performed as scheduled and at a fair and reasonable cost., • Provide overall management coordination and serve as the central point of contract (POC) with the Government for all work under the contract., • Work independently in implementing sound personnel and operational management policies and procedures to ensure successful accomplishment of the operational control and planning systems., • Interface and coordinate with all elements of the organization to have a full and complete understanding of the real time capabilities which impact mission execution., • Work semi-independently implementing sound personnel management policies and procedures to ensure successful accomplishment of the depot mission., • Strive to ensure that all operational goals, objectives, and production requirements are met., • Manage and supervise employees in accordance with the organization's policies and applicable laws. Train subordinate leaders; appraise performance; address complaints and resolve problems., • Ensure that the responsibilities of authority and accountability of all direct subordinates are defined and understood., • Promote effective two-way communications throughout the business operation., • Initiate changes designed to improve control and efficiency of the receipt, store, issue, and packaging, Care of Supplies in Storage (COSIS), inventory and transportation processes and operations., • Serve as a key member of the Olgoonik quality effort. Share ideas and issues as a member of a cross-functional team(s) assigned to improve standards and performance across the operation., • Implements employee incentives and mentors/trains employees., • Implements employee incentives and mentors/trains employees, • Manage daily site activities to ensure smooth, safe, and efficient operations., • Monitor and enforce compliance with site-specific procedures, safety protocols, and relevant regulatory requirements., • Conduct regular site inspections and audits to identify and address deficiencies or risks., • Coordinate maintenance and upkeep of site infrastructure, equipment, and facilities., • Ensure all contract deliverables are met on time, within scope, and in accordance with quality standards., • Develop and maintain a contract compliance matrix to track deliverables, deadlines, and responsibilities., • Prepare and submit required reports, data, and documentation in line with contractual and stakeholder requirements., • Identify and resolve potential risks to successful delivery of contract obligations., • Serve as the primary point of contact for on-site client representatives, subcontractors, and other stakeholders., • Participate in contract reviews, client meetings, and performance discussions., • Bachelor's degree in Distribution Management, Business Management, or Business Administration and at least five (5) years of experience in Distribution Management., • If there is no degree, must have ten (10) years of management experience in distribution operations similar to the size and complexity of a distribution center., • Experience shall include as a minimum three (3) years' experience using automated warehouse management systems within the past five (5) years., • Must be articulate, creative, a problem solver, a decision maker, and a change agent., • Must have excellent organizational and planning skills., • Proficient with Microsoft Suite including, Word, Excel, Access and Outlook., • Demonstrate a good attitude and ability to work as a member of a team., • Position requires self-motivation and the ability to work effectively under a minimum of supervision. N/A Security Clearance: • Have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered Investigation The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: General office environment. Some domestic travel may be required based on business demands. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Olgoonik is an Equal Opportunity Employer Overview: Perform full range of duties in the receipt, stow and issue of material. Ensure items being stowed meet the requirements of MIL-STD 129N. Primary Responsibilities: • Perform inventory actions., • Identify, examine, classify, accept, reject, and dispose of material as per DLA regulations., • Examinations may be visual or require measuring devices and techniques under supervision of senior staff or management., • Load material on and off skids, pallets, and stands., • Operate tools and equipment in performance of duties., • Receive data from and input data to DSS and other automated supply systems in performance of duties., • Operate Material Handling Equipment (MHE) as assigned and hold appropriate license., • Count, weight, record data, apply tags and labels., • Use basic processes of inspection/examination procedures for material., • Read specifications, drawings, prints, schematics and photographs., • Prepare reports relating to distribution functions., • Make preventive maintenance adjustments to related equipment. There are no supervisory duties associated with this position. Education and/or Experience: • High School Diploma or GED required, • Proficient in the use of Distribution Standard System (DSS) and other automated distribution systems used at site., • Proficient with Microsoft Suite products including Word, Excel, Access and Outlook software., • Demonstrate a good attitude and ability to work as a member of a team., • Ability to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail., • Material Handling Equipment (MHE) license. Must be certified to operate MHE in accordance with manufacturer guidelines. Operators must be able to safely access, control, and operate the equipment within all physical design and safety limitations defined by the manufacturer. Position requires U.S. Citizenship and a US Government background check . If the SECRET Clearance Level is required, the candidate must also: • Have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered investigation. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs overhead and/or repetitively. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic II - Electronics (Plus Up) Location San Diego, CA Job Posting 113847 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM - 41 North Island Salary Range $45.27/Hour Posting Date 01/28/2026 Union No FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: As an Aircraft Mechanic II (Electronics) you will be responsible for maintaining and repairing various aircraft systems, including engines, avionics, hydraulics, armament, landing gear, and more. You will be responsible for ensuring aircraft readiness, inspecting and repairing systems, and managing other mechanics to ensure tasks are completed on time Primary responsibilities include but are not limited to the following: 1. Aircraft Maintenance: Overseeing repairs on aircraft systems (engine, gearbox, rotor, avionics, etc.) using appropriate tools and equipment. This includes structural work, rigging, surface controls, and hydraulic systems. 2. Certifications: CDQAR (Collateral Duty Quality Assurance Representative). 3. Inspection and Repair: Conducting regular inspections, including 175-hour, isochronal, and phase inspections, to identify issues such as cracks, leaks, corrosion, and other defects. 4. System Modifications and Adjustments: Adjusting, repairing, or replacing electrical wiring systems, accessories, and various aircraft components, ensuring aircraft remains mission-ready. 5. Leadership: Assigning tasks, monitoring progress, ensuring compliance with safety procedures, and managing a team of mechanics. 6. Recordkeeping: Maintaining accurate maintenance records and verifying that work was performed satisfactorily. 7. Specialization: Specializing in areas such as engine/airframe repair, and completing additional qualifications as necessary, including ordnance qualifications. 8. Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. Page 2 of 2 Qualifications and Experience: * Experience: A minimum of 5 years of recent O-level H-60S/R/F/H aircraft maintenance or equivalent rotary aircraft experience, including 5 years of H60 CDQAR/QAR experience. * MH60-R Experience is preferred, along with prior experience with US Navy aircraft maintenance. * Leadership Experience: At least 2 years in a management or leadership role. * Technical Knowledge: Ability to interpret technical manuals and publications and perform complex repairs and inspections on aircraft systems. * Flexibility: Must be willing to work all shifts, as required by the flight schedule and tasking. * Security Clearance: Ability to obtain and maintain a Tier 3 Background Investigation and possibly a Secret Clearance. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing for a long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

Olgoonik is an Equal Opportunity Employer Overview: Perform full range of duties in the receipt, stow and issue of material. Ensure items being stowed meet the requirements of MIL-STD 129N. Primary Responsibilities: • Perform inventory actions., • Identify, examine, classify, accept, reject, and dispose of material as per DLA regulations., • Examinations may be visual or require measuring devices and techniques under supervision of senior staff or management., • Load material on and off skids, pallets, and stands., • Operate tools and equipment in performance of duties., • Receive data from and input data to DSS and other automated supply systems in performance of duties., • Operate Material Handling Equipment (MHE) as assigned and hold appropriate license., • Count, weight, record data, apply tags and labels., • Use basic processes of inspection/examination procedures for material., • Read specifications, drawings, prints, schematics and photographs., • Prepare reports relating to distribution functions., • Make preventive maintenance adjustments to related equipment. There are no supervisory duties associated with this position. Education and/or Experience: • High School Diploma or GED required, • Proficient in the use of Distribution Standard System (DSS) and other automated distribution systems used at site., • Proficient with Microsoft Suite products including Word, Excel, Access and Outlook software., • Demonstrate a good attitude and ability to work as a member of a team., • Ability to multi-task efficiently, work in a fast-paced environment on multiple projects, and have a strong attention for detail., • Material Handling Equipment (MHE). Position requires U.S. Citizenship, a US Government background check and may require a US Government SECRET Clearance If the SECRET Clearance Level is required, the candidate must also: • Have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered investigation. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 50 pounds. Work Environment: Works in shop/warehouse environment. Work involves repetitive motions and standing for long periods of time. Work is of a physical nature and requires the incumbent be able to lift 50 lbs overhead and/or repetitively. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic I - Electronics (AT) (Plus Up) Location San Diego, CA Job Posting No 113841 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM-41 North Island Salary Range $43.11/Hour Posting Date 01/27/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: The Aircraft Mechanic I - Electronics (AT) will perform maintenance on various aircraft systems including structure, landing gear, flight surfaces, hydraulic systems, engines, avionics, armament, rotor systems, and others. This position involves working with multi-national teams, and ensuring safe and mission-ready aircraft operations.Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. Primary responsibilities include but are not limited to the following: * Aircraft Repairs: o Maintenance on engine/gearbox/rotor systems, avionics, fuselage, rigging, plumbing, and hydraulic systems. * Technical Knowledge: o Interpret maintenance manuals, specifications, and service bulletins for repairs and replacements. * Engine Inspections & Repairs: o Conduct inspections, remove, repair, or replace defective engine parts, documentation of all tasking in OOMA. * Electrical & Aircraft Systems: o Adjust, repair, and replace electrical wiring and aircraft accessories. * Record Keeping: o Accurately document all maintenance performed in compliance with regulations. * Leadership: o Ensure safety and quality in maintenance activities and monitor subordinates. * Specializations: o May specialize in engine repair, airframes, electrical, or armament. o Maintain necessary certifications such as Collateral Duty Inspector (CDI) or Quality Assurance Representative (QAR). o Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. Qualifications and Experience: * Experience: o 3+ years of recent experience in H-60S/R/F/H aircraft maintenance, including CDI/CDQAR experience. ALFS qualification is required. * Technical Knowledge: o In-depth knowledge of applicable aircraft, maintenance manuals, and systems. * Clearance: o Must obtain and maintain a T3 background check, and some positions may require a secret clearance. * Physical Requirements: o Must meet medical and physical fitness standards. Page 2 of 2 * Shift Flexibility: o Must be available to work on shifts, based on flight schedules and operational needs. * Experience with MH60-R aircraft highly preferred. Working Conditions: * Must be able to lift up to 50lbs. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eyesight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills. Must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing for long periods of time and minimal sitting. * Ability to work under extreme weather conditions. * Ability to meet physical demands and pass any required medical examinations. * Work site has head, hand, hearing, eye, slip and trip hazards. Proper PPE shall be used and proper safety procedures followed. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Promote Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Plant Operation. Load hot mix asphalt into haul trucks. Manufacture various asphalt products according to mix design and customer jobsite specifications. Operate plant equipment to regulate flow of materials to and from conveyors, chutes, pumps, and storage bins. Control inventory of materials. Inspect Equipment, Structures, and Material. Perform daily inspections of the auxiliary equipment and document items in need of repair or service. Maintain stationary hot mix asphalt equipment, including but not limited to conveyors, shakers, drives, and screws. Diagnose problems and perform mechanical repair and maintenance. Monitor Processes and Materials. Monitor and review plant equipment systems to ensure continuous flow of materials and maintain certified products. Remove clogged materials when applicable. Document and Record Information. Assist plant management with record keeping and daily production schedules for submitting reports on production and maintenance. Read and write delivery tickets to determine the mix design called for each load. Issue delivery tickets to customers. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Previous experience in the aggregate or construction industry is preferred. Knowledge of Best Practices. A basic knowledge of the asphalt or construction industry is preferred. Flexibility. Must be willing to work overtime and extended hours depending on customer and company demands. Must be able to sit for long periods of time, work outside in all types of weather conditions, and tolerate being exposed to loud noises. Mechanical Skills. Must have some knowledge of industrial tools, their uses, and maintenance. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for ___ in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. ___ to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impact daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing ___. Health Benefits. Medical, Dental, Vision programs, ___. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see ___ and helping our employees meet their goals as a key part of our business. Salary Range. The base hourly range for this role is between $38.00 - $46.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our ___ as it relates to the use of temporary staffing agencies, placement services and professional recruiters. : Manufacturing : California-San Diego : GM - SO CAL : Full-time : Apr 15, 2026, 6:48:09 PM

M1 Support Services, LP 1500 Solana Blvd Suite 5200 Westlake, TX 76262 m1services.com Aircraft Mechanic I - Power Plants Location San Diego, CA Job Posting No 113983 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date 06/08/2026 Contract CFT HSM-41 North Island Salary Range $43.11/Hour Posting Date 04/1/62026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: M1 is looking for an Aircraft Mechanic I (Power Plants) This is a maintenance role focused on the upkeep of H-60 series aircraft, including the MH60-R model. This role involves supporting the maintenance and repair of various aircraft systems, performing inspections, and ensuring the readiness of the aircraft in a fast-paced, mission-critical environment. As a Mechanic I you will be responsible for repairing and maintaining aircraft components, including engines, avionics, landing gear, hydraulic systems, flight surfaces, and more. You will work with hand and power tools, interpret technical data, and perform inspections and repairs as part of routine and emergency maintenance tasks. Additionally, you will be expected to handle specialized tasks such as engine testing and part replacements. Primary responsibilities include but are not limited to the following: * Aircraft System Repairs and Rebuilds: Perform maintenance on aircraft structure, engines, gearboxes, rotor systems, and avionics. This includes using various tools (e,g., welding, shear metal brakes, rivet guns, and drills) to ensure all components are properly maintained. * Inspections and Troubleshooting: Conduct inspections (e.g., 175-hour, isochronal, and phase inspections), focusing on engine components, hydraulic systems and more. Use testing equipment to assess engine function and replace damaged parts as needed. * System Adjustments and Repair: Adjust, repair, and replace electrical wiring systems and other accessories. Ensure all aircraft systems are in safe operating condition. * Flight Support: Perform pre-flight, thru-flight, and post flight maintenance inspections, ensuring the aircraft is properly serviced and safe for operation. * Aircraft Handling: Participate in jacking, towing, and moving aircraft. Record all maintenance activities, ensuring safety of flight items are addressed. * Specialization Areas: Potential for specialization in areas like engine repair, airframe maintenance, electrical systems, or armament. * Safety and Quality Compliance: Follow safety procedures, maintain a clean work environment, and ensure compliance with quality standards. Participate in programs like FOD (Foreign Object Damage) prevention and HAZMAT handling. * Record Keeping and Documentation: Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. * Leadership and Supervision: Assign tasks, monitor work completion, and ensure safety procedures are followed during repairs and inspections. In this role you may also manage and supervise junior mechanics as needed. Additional Duties: * Maintain a clean and safe work environment (shop housekeeping). * Obtain and maintain: Certification CDI (Collateral Duty Inspector) * Participate in safety programs and ensure the proper disposal of hazardous materials. * Manage or coordinate maintenance programs as assigned. Page 2 of 2 Qualifications and Experience: * Education: High school diploma or equivalent. * Language: Must be able to read, write, and understand English. * Experience: Minimum of three (3) years of H-60 series aircraft maintenance experience (or equivalent rotary aircraft experience), with at least three (3) years of experience as a CDI/CDQAR. * MH60-R experience is preferred. * Obtain necessary certifications like CDI (Collateral Duty Inspector) or QAR (Quality Assurance Representative) * Qualifications: Ability to obtain and maintain required qualifications in line with US Navy maintenance guidelines. * Must have strong leadership skills and the ability to work collaboratively with a diverse team, often in cross-cultural environments. * Proficiency with computer programs, including Word, Excel, Outlook, and NALCOMIS/OOMA. * Security: Required to obtain and maintain a favorably adjudicated Tier-3 Background Investigation and possible secret clearance. * Current valid U.S. Driver's License. Working Conditions: * Must be able to lift up to 50lbs. * Must meet the physical standards and pass a medical exam. * Ability to work under pressure and deadlines, with a need for strong organizational skills and mental alertness * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Westlake, Texas. provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 1500 Solana Blvd Suite 5200 Westlake, TX 76262 m1services.com Aircraft Mechanic III Location San Diego, CA Job Posting 113982 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date 05/26/2026 Contract CFT HSM -41 North Island Salary Range $47.49/Hour Posting Date 04/16/2026 Union No FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: The Aircraft Mechanic 3 is responsible for overseeing the maintenance and safety of aircraft, ensuring they are released as safe for flight. This position involves managing all shop tasks, assigning workloads, and maintaining proper manning in work centers. The mechanic will perform a wide range of maintenance, from structural and engine repairs to inspecting systems such as hydraulic, flight controls, and auxiliary power units. The role also includes working with foreign cultures and participating in team leadership for maintenance operations. Primary responsibilities include but are not limited to the following: * Aircraft Repairs & Maintenance: o Perform repairs on aircraft structures and functional components, including rigging, surface controls, and hydraulic units. o Use hand tools, power tools, and machines to repair and rebuild parts such as blades, fuselage, and gearboxes. o Inspect turbine engines for cracks, corrosion, wear, and other damage, and test engine operations using specialized equipment. o Remove, repair, and reassemble engine components. * Aircraft Inspections: o Perform 175-hour, progressive, isochronal, phase, periodic, and other inspections. o Inspect engines, structural components, and other aircraft systems for wear, corrosion, or other defects. o Service aircraft, including gearbox flushing, cleaning filters, greasing moving parts, and checking brakes. * Documentation & Compliance: o Accurately document maintenance activities in NALCOMIS/OOMA and ensure all inspections are recorded properly. o Follow local work site instructions and Navy regulations for maintenance and safety. * Leadership & Team Coordination: o Supervise and assign tasks to team members, ensuring safety and quality standards are met. o Manage shop operations and ensure proper manpower is allocated to various maintenance tasks. * Hazmat Handling & Safety: o Handle hazardous materials (Hazmat) in accordance with safety protocols. o Participate in the FOD program, maintaining a clean and safe work environment. o Comply with all safety requirements and guidelines for aircraft maintenance. Page 2 of 3 Qualifications and Experience: * Experience: o 10 years of recent O-level H-60S/R/F/H Aircraft Maintenance or equivalent rotary aircraft experience. o 5 years of H60 Safe for Flight (release aircraft safe to fly) and CDQAR/QAR experience, with at least 2 years in management capacity. * Skills & Qualifications: o Ability to read, interpret, and apply technical data and special operating instructions. o Proficiency in using computer programs such as NALCOMIS/OOMA, Word, Excel, PowerPoint, and Outlook. o Good leadership and communication skills. o Ability to obtain and maintain all necessary qualifications and certifications. * Other Requirements: o Ability to work flexible shifts based on flight schedules. o Must be able to pass a pre-employment drug screen. o Must be able to meet physical requirements associated with assigned tasks. o Must be able to obtain a US government Common Access Card (CAC) and meet background investigation requirements. * Preferred Qualifications: o Prior experience with MH60 Safe for Flight (release aircraft safe to fly). o Experience in U.S. Navy aircraft maintenance operations. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing long periods of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per- week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. Page 3 of 3 M1 Support Services, headquartered in Westlake, Texas, provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic II - Power Plants (Plus Up) Location San Diego, CA Job Posting 113850 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM - 41 North Island Salary Range $45.27/Hour Posting Date 01/28/2026 Union No FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: As an Aircraft Mechanic II (Power Plants) you will be responsible for maintaining and repairing various aircraft systems, including engines, avionics, hydraulics, armament, landing gear, and more. You will be responsible for ensuring aircraft readiness, inspecting and repairing systems, and managing other mechanics to ensure tasks are completed on time Primary responsibilities include but are not limited to the following: Aircraft System Repairs & Rebuilds: Perform maintenance on aircraft structure, engines, gearboxes, rotor systems, and avionics. This includes using various tools (e.g., welding, sheet metal brakes, rivet guns, and drills) to ensure all components are properly maintained. Inspections & Troubleshooting: Conduct inspections (e.g., 175-hour, isochronal, and phase inspections), focusing on engine components, hydraulic systems, and more. Use testing equipment to assess engine function and replace damaged parts as needed. System Adjustments & Repairs: Adjust, repair, and replace electrical wiring systems and other accessories. Ensure all aircraft systems are in safe operating condition. Flight Support: Perform preflight, thru-flight, and post-flight maintenance inspections, ensuring the aircraft is properly serviced and safe for operation. Aircraft Handling: Participate in jacking, towing, and moving aircraft. Record all maintenance activities, ensuring safety of flight items are addressed. Leadership & Supervision: Assign tasks, monitor work completion, and ensure safety procedures are followed during repairs and inspections. You may also manage and supervise junior mechanics as needed. Specialization Areas: Potential for specialization in areas like engine repair, airframe maintenance, electrical systems, or armament. Safety & Quality Compliance: Follow safety procedures, maintain a clean work environment, and ensure compliance with quality standards. Participate in programs like FOD (Foreign Object Damage) prevention and Hazmat handling. Record Keeping & Documentation: Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. Additional Duties: Maintain a clean and safe work environment (shop housekeeping). Obtain and maintain certifications: CDQAR (Collateral Duty Quality Assurance Representative). Participate in safety programs and ensure the proper disposal of hazardous materials. Manage or coordinate maintenance programs as assigned. Page 2 of 2 Qualifications and Experience: Education: High school diploma or equivalent. Experience: Minimum of three years of H-60 series aircraft maintenance experience (or equivalent rotary aircraft experience), with at least three years of experience as a CDI/CDQAR. MH60-R experience is preferred. Qualifications: Ability to obtain and maintain required qualifications in line with U.S. Navy maintenance guidelines. Security: Ability to obtain and maintain a Tier 3 Background Check (and possible secret clearance). Physical Requirements: Must meet the physical standards and pass a medical exam. Language: Must be able to read, write, and understand English. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing for a long period of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Promote Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Repair and Maintain Mobile Equipment. Service, repair, adjust, and test all mobile equipment that operates throughout the plant in order to maximize performance and limit downtime. Inspect Equipment and Material. Inspect all mobile equipment to identify and troubleshoot the cause of errors. Perform repairs to address problems when necessary. Handle and Move Objects. Handle, install, position, and move parts, materials, and industrial hand tools in a safe manner throughout the shop and plant. Document and Record Information. Ensure correct and accurate documentation is completed on a daily and monthly basis regarding all mobile equipment. Enter and maintain service reports for all the mobile equipment in written or electronic form. Operate Equipment. Assist in driving heavy equipment and vehicles throughout the plant when necessary in order to ensure production continues in an efficient manner. Perform General Physical Activities. Perform physical activities that require moving your whole body and considerable use of your arms and legs, such as climbing, lifting, balancing, walking, stooping, and handling materials. Additional Responsibilities. Other duties as assigned. Skills and Experience you must have: Experience. Previous Maintenance and Welding experience working on Industrial or heavy construction equipment referred to as Yellow Iron: • Industrial or construction Welding, • Excavators, • Dozers, • Backhoes, • Loaders Knowledge of Best Practices. Must demonstrate knowledge of best practices related to using electric, gas, arc, or other welding equipment. General knowledge of the occupational hazards involved in welding is preferred. Knowledge of general principles and practices of servicing heavy construction equipment is a MUST. • Tier 4 Finals -on Heavy Equipment Standards, • Troubleshooting, • Understand Diagnostic and Heavy Equipment Computer-based Troubleshooting, • Engine, • Hydraulics Mechanical Skills. Must have knowledge of industrial tools, their uses, and maintenance. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impact daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Training and Development. We see our development programs and helping our employees meet their goals, as a key part of our business. Salary Range. The base hourly range for this role is between $35.00 - $48.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our ___ as it relates to the use of temporary staffing agencies, placement services and professional recruiters. : Operations : California-San Diego : GM - SO CAL : Full-time : Apr 1, 2026, 3:32:19 PM

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic III (Plus Up) Location San Diego, CA Job Posting 113851 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date TBD Contract CFT HSM -41 North Island Salary Range $47.49/Hour Posting Date 01/28/2026 Union No FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: The Aircraft Mechanic 3 is responsible for overseeing the maintenance and safety of aircraft, ensuring they are released as safe for flight. This position involves managing all shop tasks, assigning workloads, and maintaining proper manning in work centers. The mechanic will perform a wide range of maintenance, from structural and engine repairs to inspecting systems such as hydraulic, flight controls, and auxiliary power units. The role also includes working with foreign cultures and participating in team leadership for maintenance operations. Primary responsibilities include but are not limited to the following: * Aircraft Repairs & Maintenance: o Perform repairs on aircraft structures and functional components, including rigging, surface controls, and hydraulic units. o Use hand tools, power tools, and machines to repair and rebuild parts such as blades, fuselage, and gearboxes. o Inspect turbine engines for cracks, corrosion, wear, and other damage, and test engine operations using specialized equipment. o Remove, repair, and reassemble engine components. * Aircraft Inspections: o Perform 175-hour, progressive, isochronal, phase, periodic, and other inspections. o Inspect engines, structural components, and other aircraft systems for wear, corrosion, or other defects. o Service aircraft, including gearbox flushing, cleaning filters, greasing moving parts, and checking brakes. * Documentation & Compliance: o Accurately document maintenance activities in NALCOMIS/OOMA and ensure all inspections are recorded properly. o Follow local work site instructions and Navy regulations for maintenance and safety. * Leadership & Team Coordination: o Supervise and assign tasks to team members, ensuring safety and quality standards are met. o Manage shop operations and ensure proper manpower is allocated to various maintenance tasks. * Hazmat Handling & Safety: o Handle hazardous materials (Hazmat) in accordance with safety protocols. o Participate in the FOD program, maintaining a clean and safe work environment. o Comply with all safety requirements and guidelines for aircraft maintenance. Page 2 of 3 Qualifications and Experience * Experience: o 10 years of recent O-level H-60S/R/F/H Aircraft Maintenance or equivalent rotary aircraft experience. o 5 years of H60 Safe for Flight (release aircraft safe to fly) and CDQAR/QAR experience, with at least 2 years in management capacity. * Skills & Qualifications: o Ability to read, interpret, and apply technical data and special operating instructions. o Proficiency in using computer programs such as NALCOMIS/OOMA, Word, Excel, PowerPoint, and Outlook. o Good leadership and communication skills. o Ability to obtain and maintain all necessary qualifications and certifications. * Other Requirements: o Ability to work flexible shifts based on flight schedules. o Must be able to pass a pre-employment drug screen. o Must be able to meet physical requirements associated with assigned tasks. o Must be able to obtain a US government Common Access Card (CAC) and meet background investigation requirements. * Preferred Qualifications: o Prior experience with MH60 Safe for Flight (release aircraft safe to fly). o Experience in U.S. Navy aircraft maintenance operations. Working Conditions: * Must be capable of lifting 50lbs and performing physical tasks as required. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eye sight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills, and must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing long periods of time with minimal sitting. * Ability to work under extreme weather conditions. * Work site has head, hand, hearing, eye, slip and trip hazards shall use proper PPE and proper safety procedures. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per- week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. Page 3 of 3 M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

M1 Support Services, LP 1500 Solana Blvd, Suite 5200 Westlake, TX 76262 m1services.com Aircraft Mechanic I - Electronics (AT) Location San Diego, CA Job Posting No 114010 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date 06/15/2026 Contract CFT HSM-41 North Island Salary Range $43.11/Hour Posting Date 04/30/2026 Union Yes FLSA Status Non-Exempt Shift Work Possible FT/PT Full-time Relocation No Travel Possible Job Summary: The Aircraft Mechanic I - Electronics (AT) will perform maintenance on various aircraft systems including structure, landing gear, flight surfaces, hydraulic systems, engines, avionics, armament, rotor systems, and others. This position involves working with multi-national teams, and ensuring safe and mission-ready aircraft operations.Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. Primary responsibilities include but are not limited to the following: * Aircraft Repairs: o Maintenance on engine/gearbox/rotor systems, avionics, fuselage, rigging, plumbing, and hydraulic systems. * Technical Knowledge: o Interpret maintenance manuals, specifications, and service bulletins for repairs and replacements. * Engine Inspections & Repairs: o Conduct inspections, remove, repair, or replace defective engine parts, documentation of all tasking in OOMA. * Electrical & Aircraft Systems: o Adjust, repair, and replace electrical wiring and aircraft accessories. * Record Keeping: o Accurately document all maintenance performed in compliance with regulations. * Leadership: o Ensure safety and quality in maintenance activities and monitor subordinates. * Specializations: o May specialize in engine repair, airframes, electrical, or armament. o Maintain necessary certifications such as Collateral Duty Inspector (CDI) or Quality Assurance Representative (QAR). o Maintain detailed records of all maintenance performed in OOMA or similar to OOMA systems ensuring compliance with 4790 and safety standards. Qualifications and Experience: * Experience: o 3+ years of recent experience in H-60S/R/F/H aircraft maintenance, including CDI/CDQAR experience. ALFS qualification is required. * Technical Knowledge: o In-depth knowledge of applicable aircraft, maintenance manuals, and systems. * Clearance: o Must obtain and maintain a T3 background check, and some positions may require a secret clearance. * Physical Requirements: o Must meet medical and physical fitness standards. Page 2 of 2 * Shift Flexibility: o Must be available to work on shifts, based on flight schedules and operational needs. * Experience with MH60-R aircraft highly preferred. Working Conditions: * Must be able to lift up to 50lbs. * Computer usage for documentation using codes and clear written and verbal English language required. * Constant use of eyesight abilities while reviewing documents, walking around work areas and constant use of English language speech/hearing abilities for communication. * Constant mental alertness around all work areas, must possess planning/organization skills. Must be able to work under deadlines. * Climbing aircraft using aircraft step and all types of ladders or stands. * Standing for long periods of time and minimal sitting. * Ability to work under extreme weather conditions. * Ability to meet physical demands and pass any required medical examinations. * Work site has head, hand, hearing, eye, slip and trip hazards. Proper PPE shall be used and proper safety procedures followed. * Must be able to work all shifts. Full-time employment: however, 40 hours is not guaranteed per-week. Working hours; must be able to be flexible, start time and end time will be dependent on flight schedule and or overall tasking. M1 Support Services, headquartered in Westlake, Texas, provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

Number ICIMS-2026-9968 Job function Manufacturing Job type Full-time Location Werfen - San Diego - AID - 9900 Old Grove Road San Diego, California 92131-1638 United States Country United States Shift 1st Introduction Werfen is a growing, family-owned, innovative company founded in 1966 in Barcelona, Spain. We are a worldwide leader in specialized diagnostics in the areas of Hemostasis, Acute Care Diagnostics, Transfusion, Autoimmunity, and Transplant. Through our Original Equipment Manufacturing (OEM) business line, we research, develop, and manufacture customized assays and biomaterials. We operate directly in 30 countries, and in more than 100 territories through distributors. Our Headquarters and Technology Centers are located in the US and Europe, and our workforce is more than 7,000 strong. Our success comes from a specific focus in these rapidly evolving diagnostic areas, our commitment to customers, and our dedication to innovation and quality. We're passionate about providing healthcare professionals the most valuable and complete solutions to improve hospital efficiency and enhance patient care Overview Job Summary The Research Associate IV contributes to the current and future Inova Diagnostic product lines by designing and performing a wide variety of laboratory techniques to assist in the development and transfer of new assays and/or improve on market assays. The individual in this role will be instrumental in driving robustness in assays being transferred from R&D into manufacturing. He/she is responsible for working independently to complete complex laboratory activities, where analysis of situations or data requires an in-depth evaluation of a variety of factors. The individual will exercise judgment in selecting methods and evaluation criteria for obtaining results. He/she will serve as a technical lead and provides training and guidance to junior members of the team and provides administrative support to department management, as needed. The person in this role will follow good laboratory documentation practices and in accordance with Standard Operating Procedures and other Research and Quality System requirements. Responsibilities Key Accountabilities • Designs and executes complex experiments for assay development, transfer, and on-market sustaining support; performs data analysis and interpretation., • Develops and executes protocols for the generation of results using multiple technologies (e.g. ELISA, Chemiluminescence, Indirect Immunofluorescence, Bead-based assays)., • Establishes acceptance criteria by analyzing current data and generating additional data, taking into consideration regulatory guidance documents and technical literature., • Independently plans and performs a variety of laboratory bench work., • Leads or supports root cause investigation activities for R&D or on market assays using structured problem solving methodologies (e.g. DMAIC) and implements the associated corrective actions., • Performs statistical analysis for the design of experiments (DOE), analysis of data, and process monitoring., • Executes and designs process characterization studies (e.g. in process stability, mixing parameters) to support manufacturing specifications and the identification of critical to quality attributes., • Ensures appropriate assay specifications are included in the manufacturing documentation to enable robust product manufacturing., • Conducts guard banding and process characterization studies for assays in collaboration with R&D and manufacturing teams., • Coordinates initial production of assays transferring from R&D into manufacturing., • Stays current on related scientific literature and regulatory/quality documents., • Understands and executes all relevant quality documents. Writes new manufacturing documents, Standard Operating Procedures, CAPAs, and other quality documents and processes documents through the company enterprise resource planning (ERP) system, SAP., • Coordinates aspects of the design control process related to development and transfer by conducting meetings, drafting design control documents and design reviews according to appropriate SOPs independently., • Generates or supports design control deliverables such trace matrices, manufacturing documents, and transfer deliverables., • Coordinates and facilitates assay development and transfer related meetings involving cross-functional groups by preparing agendas, meeting minutes and action item tracking., • Develops and maintains training materials and providing training to other staff., • Coordinates tasks associated with assay development accountabilities for other team members. Includes the ability to prioritize workload and potential changes in required work, for self and for team, as required., • Interprets and utilizes information from V&V reports., • Coordinates maintenance and/or calibration process equipment and instrumentation, including tracking and traceability for GLP studies and preventive maintenance and calibration, • Coordinates and facilitates the upkeep of laboratory equipment and other supplies required to avoid interruptions to workflow and maintain material availability., • Accurately maintains lab records and scientific reports with attention to detail. Proficient in data collection and analysis independently., • Provides support to department management on a variety of administrative activities, which may include schedule coordination, training, distribution of workflow through the team/department, serving as a subject matter expert, etc., • Understands the safety, technical, recordkeeping and Quality Systems Regulations (QSR) aspects of their position., • Ensures compliance with applicable Inova standard operating procedures (SOPs), ISO, FDA and other Quality System regulations, as well as applicable Environmental Health & Safety, Human Resources and all other regulatory and administrative policies., • Reflects the values of Werfen and Inova in the quality of work and in working relationships., • Support for regulatory submissions, audits, and inspections. Networking/Key relationships • Research & Development Teams, • Manufacturing Teams, • Quality Teams, • Sales and Marketing Teams Minimum Knowledge & Experience for the position: Education: • Bachelor's degree in related field (ex: Biology, Microbiology, Cellular Biology, Biochemistry) required plus at least 8+ years of experience working in a research and/or manufacturing lab required., • Master's degree in related field (ex: Biology, Microbiology, Cellular Biology, Biochemistry) required plus at least 5+ years of experience working in a research and/or manufacturing lab required., • Experience working in the field of immunology diagnostic research and/or medical device development strongly preferred., • Proficient using structured problem solving and basic statistical methods., • Deep knowledge and experience following lab protocols, safety requirements and procedures., • Demonstrated experience using a variety of laboratory equipment. Skills & Capabilities: • Adaptability and Resilience, • Organizational and multi-tasking skills., • Team Focus & Collaboration, • Initiative, • Detail Oriented, • Time Management Less than 5% Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to communicate. Must be able to detect, identify and inspect scientific data. The employee will be required to stand and/or walk up to 8 hours per day and/or sit for up to 8 hours per day. Must be able to use hands to feel objects, including keyboard, telephone and pipettes or other lab equipment. May need to reach with hands and arms, climb stairs, balance, stoop, kneel or crouch. Will be required to talk and hear and have specific vision abilities, including close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. May occasionally have to lift and/or move up to 25 pounds. The noise level in the work environment will vary but is usually moderate. Other Duties and Acknowledgement: The above statements are intended to describe the general nature and level of work being performed by the incumbent. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of this position. Note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. This job description does not constitute or contain a contract or employment promise of any kind. Nothing contained herein modifies the at-will nature of employment with Werfen. The annual base salary range for this role is currently $86,000 range to $110,000 range. Individual employee compensation will ultimately depend on factors including education, relevant experience, skillset, knowledge, and particular business needs. This role is eligible for medical, dental, and vision insurance, 401k plan retirement benefits with an employer match, as well as paid vacation and sick leave. Our sales roles are eligible for participation in a commission plan and our management, and select professional roles, are eligible for a performance-based bonus. If you are interested in constantly learning and being challenged on a daily basis we encourage you to submit your resume or CV. Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen strictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact for assistance. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team. If you are interested in constantly learning and being challenged on a daily basis we encourage you to submit your resume or CV. Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen strictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact for assistance. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team.

Olgoonik is an Equal Opportunity Employer Overview: Interface with all functional elements to establish and modify processes, anticipate or solve problems and determine internal customer needs. Receive guidance, direction, and assistance from the Program/Site Manager. Point of contact for employment, training, benefits, hiring, and disciplinary action. Schedule training to meet certification requirements, provide interface with Team Olgoonik Human Resources personnel. Use phone, email, letter, and personal contact to understand/resolve specific employee issues. Primary Responsibilities: • Work independently in implementing sound personnel management and material management policies and procedures, to ensure successful accomplishment of the production control, planning, and maintenance management systems., • Interface and coordinate with all elements of the organization to have a full and complete understanding of the real-time capabilities which impact mission execution., • Manage and supervise employees in accordance with the Company's policies and applicable laws including: interviewing, hiring, training, planning, assigning work, directing work, appraising performance, counseling, addressing complaints, and resolving problems., • In conjunction with Safety Manager, initiate post-accident urinalysis process., • Serve as a key member of the Team Olgoonik quality effort. Share ideas and issues as a member of cross-functional team(s) assigned to improve standards and performance across the operation., • Schedule applicant interviews. Maintain applicant tracking, conduct reference checks, and arrange for applicant testing. Prepare offer letter requests., • Coordinator, scheduling, documenting training, managing employee and training folders, which includes collecting training certificates, • Assist with ordering and managing supplies, • Schedule and conduct new employee orientation., • Prepare reports as required., • Answer employee inquiries on a variety of Human Resources (HR) related issues. Assist in counseling employees as required. N/A Education and/or Experience: • Bachelor's degree or equivalent. (May substitute experience for education on a year-by-year basis)., • Three years of general experience in Human Resources, logistics, management, business or a related field., • Must be proficient with Microsoft Suite of products including, Word, Excel, Access and E-mail business software., • Ability to respond effectively and rapidly to sensitive inquiries., • Must demonstrate a good attitude and ability to work as a member of a Team., • Position requires self-motivation and the ability to work effectively under a minimum of supervision. None Required Security Clearance: IF SECRET Level May be Required • Must have a current US Government SECRET Personnel Security Clearance or be able to successfully complete a U.S. government administered Investigation., • Must be a U.S. Citizen. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: General office environment. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.