Trabajos manufacturing engineer en Rochester, New YorkCrear alertas

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Scientist, Systems Engineering (Chief Systems Engineer) Job Code: 35637 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: As a Chief Systems Engineer (CSE) and Chief Systems Architect (CSA), the candidate will lead technical concept development and architecture designs for Tactical Communication products and will interact with both internal and external customers. The candidate will be required to provide technical support to Business Development teams and Product Development teams. Strong communication and interpersonal skills, coupled with the ability work within a large engineering team are required. The successful candidate must be able to describe complex system solutions to audiences of varying technical backgrounds and establish support/enthusiasm for a proposed solution. The CSE/CSA will be responsible for all technical, cost and schedule performance, including technical oversight of engineering design and development, integration, test and maintenance of the system. Essential Functions: • Technical leadership of a cross-functional engineering team throughout the full program lifecycle including design, development, manufacturing, formal hardware/software qualification, integration and test, and issue resolution, • Technical, cost, and schedule accountability for technical program execution., • Ability to direct and oversee seamless integration of mechanical, electrical, and software subsystems and systems; including internal and external stakeholders, • Provide guidance and support to achieve project goals including leading major design and milestone reviews (CoR, SRR, PDR, etc), technical meetings, and project planning sessions, • Provide leadership and guidance on contracts of all phases of the portfolio from capture to sustaining including reviewing and approving estimate to complete (ETCs) of the engineering content of the program., • CAM activities, including budgeting, scheduling, and resource allocation for the system aspects of the program., • Represent engineering both within the organization and with major customers through clear communication; ability to influence changes to practices, processes and approaches., • Responsible for establishing the direction for new processes, systems, solutions, and products using significant conceptualization, reason, and interpretation., • Lead and conduct trade studies to compare different hardware/software design options and select the most appropriate solutions. Perform analyses of subcomponents to identify potential issues and ensure optimal performance., • Develop and maintain documentation related to system design, analysis, and testing., • Ensure compliance with industry standards, regulations, and best practices., • Support new business pursuits and proposal cost reviews to ensure proper technology readiness, Design to Cost, and resource alignment., • Work closely with Business Development teams, Engineering Project teams and Engineering Discipline Team leads to ensure consistent strategy, direction, and alignment with the Segment Strategic Growth Plan (SGP)., • Lead technology initiatives beyond their own core technical specialty, relying on team members from other specific disciplines as required., • Work collaboratively across the engineering organization to focus on the Requirements Management, Technical Baseline Creation, Review and Approval, Technical Roadmap Creation and aspects of System Engineering process compliance including, but not limited to, process artifact review and approval, leading solution design reviews, and Risk Management/Analysis., • Maintain a climate of fostering a high level of team motivation, performance, and commitment., • Ability to work on ITAR and CUI projects Qualifications: • Bachelor’s Degree in Engineering with a minimum of 15 years of prior relevant experience. Graduate Degree in Engineering and a minimum of 13 years of prior related experience. In lieu of a degree, minimum of 19 years of prior related experience., • 10 years of communications & systems engineering experience with SATCOM, LOS, and/or HF waveforms is essential for this role., • 10 years of product & system architecture experience with SATCOM, LOS, and/or HF radios and systems., • 10 years of experience developing, managing, and verifying requirements for components or systems, • Technical expertise in Electrical, Mechanical, and Software engineering disciplines, • Experience with space, airborne, and ground systems architecture and implementation, • Experience with requirements management, preferably with DOORS, • Experience with Model-based design, preferably with SysML using Cameo Systems Modeler., • Experience with data analysis and/or modeling and simulation (e.g. with MATLAB/python), • Experience with project management aspects of cost plus and fixed-price programs with government customers (cost accounting standards, cost account management/earned value management system, estimating costs, managing schedules), • Experience with estimating and managing costs for large product and system developments, • Experience describing complex system solutions to audiences of varying technical backgrounds and establishing support/enthusiasm for a proposed solution., • Demonstrated leadership, communication, and interpersonal skills, • Office-based with occasional travel (<20%) to project sites or meetings as required., • Active Secret clearance preferred. In compliance with pay transparency requirements, the salary range for this role in New York state is $160,000- $297,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer-RF Job Code: 36749 Job Location: Rochester, NY Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week Job Description: The successful candidate will join a team of dedicated professionals who are responsible for supporting military communication products from pre-release to obsolescence. As a member of the Product Support Engineering team you will be tasked with investigating a variety of problems including RF/Analog, digital, assembly, SMT and test related. You will collaborate across multifunctional teams to diagnose problems to component level, determining solutions via simulation and experimentation and implementing corrective actions. As new products are launched you will interface with design engineering, assisting with root cause analysis, troubleshooting of prototypes and ensuring a successful launch into full rate production. Typical tasks include: • Mitigating component shortages through qualifying alternatives or redesigning circuits and sub-assemblies., • Determining design, process, and test improvements to increase test yields and product quality., • Working in cross-functional teams to meet manufacturability, testability and other DFx requirements for volume production., • Working with design engineering and manufacturing teams to introduce new designs into manufacturing., • Working with design engineering to make necessary circuit changes prior to and during the launch of new products., • Working to mitigate component obsolescence throughout the product lifecycle., • Provide guidance to junior staff. Assisting them as they investigate problems. Leading investigations and coordinating tasks., • Working with vendors, Quality and Supply Chain to address material discrepancies., • Hardware troubleshooting ability including analog and RF components and circuits., • Ability to work independently with general supervision., • Ability to design and conduct engineering experiments and act upon test results., • Design and analysis of circuits and components utilizing ADS, Matlab and various design and simulation tools., • Experienced in leading small technical design or troubleshoot team, providing direction and prioritizing tasks to meet target yields and shipments., • Generate and deliver presentations for various levels of management regarding issues, investigations, improvements or cost savings in a concise manner., • Ability to work in a fast-paced environment interfacing with multiple teams across the organization., • Ability to use typical lab equipment: Oscilloscope, DMM, Spectrum & Network analyzers, and signal generators., • Must be a quick learner, able to problem solve and be self-motivated., • Able to analyze designs and communicate technical information to support staff., • Bachelor’s Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience in RF., • Electrical engineering degree., • Experience with tactical Radio and Power Amplifier HW., • Experience troubleshooting to component level., • Working knowledge of LabVIEW, ADS and Jira., • Experience with MS Office including advanced spreadsheet manipulation and presentation creation. #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, System Engineering (Space Optics) Job Code: 36095 Job Location: Rochester, NY Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Job Description: The L3Harris space superiority and imaging systems engineering department is seeking a systems engineer to join our team and support programs that we have recently won. The department specializes in space-based, small and large aperture visible and infrared telescopes with integrated electromechanical devices used for motion and focus control. The successful candidate will be a technical point of contact and IPT, performing technical analysis, managing specifications, and generating design review and technical documents. Additional responsibilities include leading the test and design verification, requirements sell off, and end item data package (EIDP) generation efforts. Essential Functions: • Systems engineering experience in passive/active electro-optical hardware, • Perform technical analysis, manage specifications, and generate design review, requirements, specifications, interface, and technical documents., • Support product test and design verification, requirements sell-off, risk assessments and mitigations, end item data package generation efforts, • Engage in continuous process improvement initiatives to enhance engineering efficiency and effectiveness., • Coordinate with cross-functional teams to ensure integration and compatibility of all system components and provide technical leadership and guidance throughout the entire project lifecycle., • Utilize systems engineering tools and methodologies to support model-based systems engineering (MBSE)., • Contribute to proposal development and program planning activities. Qualifications: • Bachelor’s Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience., • Professional experience in a systems engineering role supporting requirements, design, manufacturing, and integration of systems, • Professional experience working with MBSE tools and methodologies, • Experience working on aerospace products Preferred Additional Skills: • Candidate with an active Top Secret/SCI clearance is highly desirable., • Technical Subject Matter Expertise in optical, electro-optical, electrical, mechanical, electromechanical, or equivalent engineering discipline., • Relevant experience with the design, manufacture, integration, test and sell-off of space-based EO/IR subsystems., • Cameo Systems/No Magic Model-based systems engineering (MBSE), SysML, • Ability to manage multiple and competing priorities., • Ability to support program milestone reviews (SRR, SDR, PDR, CDR, FCA/PCA, PSR)., • Ability to collaborate across all levels of leadership., • Work collaboratively with others and complete assignments with a team-oriented approach., • Strong communication and interpersonal skills – taking complex concepts and sharing with others., • Ability to architect an end-to-end space system with a full understanding of the product lifecycle., • Experience with project management aspects of technology development programs., • Experience with estimating and managing costs & creating and managing schedules In compliance with pay transparency requirements, the salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, and Vermont is $80,500.00 - $149,500.00 This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer Job Code: 36888 Job Location: Rochester, NY Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week Job Description: The successful candidate will join a team of dedicated professionals who are responsible for supporting military communication products throughout their lifecycle. As a Product Support Engineer you will be tasked with investigating a variety of problems related to Analog, Digital, and RF. Candidates with experience in any of these areas will be considered. Working from our lab adjacent to manufacturing you will collaborate across multifunctional teams to diagnose problems to component level, determine solutions via experimentation and simulation and implement corrective actions. As an extension of design engineering, you will have the opportunity to learn and grow while providing electrical engineering support to technicians and junior engineers. As new products are launched you will interface across engineering, assisting with root cause analysis, troubleshooting of prototypes and ensuring a successful launch into full-rate production. Typical tasks include: • Monitoring daily factory yields, investigating failures, and determining corrective actions., • Mitigating component shortages through selecting and qualifying alternatives or redesigning circuits and sub-assemblies., • Determining design, process, and test improvements to increase test yields and product quality., • Working as part of a cross-functional team to meet manufacturability, testability and other DFx requirements for volume production., • Working with other engineering teams to make necessary circuit changes prior to and during the launch of new products., • Working to mitigate component obsolescence throughout the product lifecycle., • Provide guidance to junior staff by providing assistance as they investigate problems., • Lead investigations, coordinate tasks, and direct junior staff as required., • Work with Quality and Supply Chain to address material discrepancies., • Troubleshooting unit, modules, and boards to the component level., • Support digital and related analog hardware designs., • Hardware troubleshooting ability to component level for analog and digital circuits., • Ability to work independently and within a team setting., • Ability to design and conduct engineering experiments and act upon test results., • Design and analysis of circuits and components utilizing various simulation tools., • Experienced in leading small technical design or troubleshooting team, providing direction and prioritizing tasks to meet target yields and shipments., • Ability to work in a fast-paced environment interfacing with multiple teams across the organization., • Ability to use typical lab equipment: Oscilloscope, DMM, Spectrum & Network analyzers, logic analyzers and signal generators., • A driven person that wants to learn and is a proven problem solver., • Able to analyze designs and communicate technical information to support staff., • Experience with tactical radios is a plus., • Experience reading schematics and datasheets, probing circuits and understanding proper circuit operation., • Troubleshoot circuit assemblies to component level, • Ability to select alternate electronic components and know what testing is required to qualify them., • Working knowledge of LabVIEW and Jira a plus. #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Sr Associate, Systems Engineer (Space Optics) Job Code: 36093 Job Location: Rochester, NY Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Job Description: The L3Harris space superiority and imaging systems engineering department is seeking a systems engineer to join our team and support programs that we have recently won. The department specializes in space-based, small and large aperture visible and infrared telescopes with integrated electromechanical devices used for motion and focus control. The successful candidate will assist in performing technical analysis, managing specifications, and generating design reviews and technical documents. Additional responsibilities include leading the test and design verification, requirements sell off, and end item data package (EIDP) generation efforts. Essential Functions: • Support product test and design verification, requirements sell-off, risk assessments and mitigations, end item data package generation efforts, • Excellent oral and written communication skills., • Strong organizational and time management skills., • Ability to work independently as a member of a multi-disciplined integrated product team., • Engage in continuous process improvement initiatives to enhance engineering efficiency and effectiveness., • Utilize systems engineering tools and methodologies to support model-based systems engineering (MBSE). Qualifications: • Bachelor’s Degree and a minimum of 2 years of prior related experience. Graduate Degree or equivalent with 0 to 2 years of prior related experience. In lieu of a degree, minimum of 6 years of prior related experience., • Professional experience in systems engineering role supporting requirements, design, manufacturing, and integration of systems, • Professional experience working with MBSE tools and methodologies, • Experience working on aerospace products Preferred Additional Skills: • Active Secret or Top Secret/SCI clearance is preferred, • Technical Subject Matter Expertise in optical, electro-optical, electrical, mechanical, electromechanical, or equivalent engineering discipline., • Relevant experience with the design, manufacture, integration, test and sell-off of space-based EO/IR subsystems., • Cameo Systems/No Magic Model-based systems engineering (MBSE), SysML, • Ability to manage multiple and competing priorities., • Ability to support program milestone reviews (SRR, SDR, PDR, CDR, FCA/PCA, PSR)., • Ability to collaborate across all levels of leadership., • Work collaboratively with others and complete assignments with a team-oriented approach., • Strong communication and interpersonal skills – taking complex concepts and sharing with others., • Ability to architect an end-to-end space system with a full understanding of the product lifecycle., • Experience with project management aspects of technology development programs., • Experience with estimating and managing costs & creating and managing schedules In compliance with pay transparency requirements, the salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, and Vermont is $70,500.00 - $130,500.00 This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Embedded Software Engineering - DSP Job Code: 34665 Job Location: Rochester, NY Job Schedule: 9/80; Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: The L3Harris Communications and Mission Critical Communications sector is seeking a highly motivated, team oriented digital signal processing software design engineer who will lead a cross functional team with hands on responsibility for all phases of the software development process from requirements definition through integration and testing of completed product. Emphasis will be on waveform design and digital signal processing for digital communications. Other responsibilities will include high-level design, detailed design, simulation, implementation, testing and documentation. Experience with leading collaborative software design/development/test teams is expected. Experience with digital signal processing (DSP), embedded C++/C and MATLAB is expected. Experience working with Agile Scrum, and DevOps-based software development is desired. Experience in engineering requirements analysis, development, and testing is desired. Essential Functions: The responsibilities and duties of this position include but are not limited to: • Research, design, develop, modify and evaluate embedded software for electronic or other communications systems in conjunction with hardware product development., • Lead and contribute to the execution of the assigned portion of the entire product development cycle in an Agile Scrum framework., • Perform detailed analysis including: requirements analysis, use case scenarios, conceptual design, trade studies, test, operation, maintenance, and reliability analysis of radio communications products, internal subsystems, and external systems., • Work with test, manufacturing, product and program management and others to define and execute radio product development and deliver high-quality radio products., • Ensure the conversion of customer requirements, including informal requirements, into total systems solutions that balance the technical, schedule and cost constraints of the program., • Consult with electrical engineers and other engineering staff to evaluate interface between hardware and software and operational performance requirements of the overall system., • Develop software system testing procedures and design documentation., • Exhibit effective interpersonal skills and the ability to convey technical matters in a clear and logical manner., • Have the opportunity to stay up to date with the latest advancements in DSP technology and apply new techniques and methodologies., • Contribute to the strategic direction of DSP solutions and identify opportunities for innovation and improvement., • Work closely with an Agile team of experienced software engineers on projects that involve the development and analysis of innovative real-time signal processing solutions., • Ability to Obtain US Security Clearance Qualifications: • Bachelors degree in Engineering discipline with a minimum 9 years of relevant experience developing real-time embedded software in C or C++. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience. Preferred Additional Skills: • Experience developing designing, developing, and implementing DSP algorithms., • Experience simulating and analyzing DSP algorithms., • Ability to interpret hardware schematics, circuit designs, and datasheets., • Proficiency with multi-threaded, multi-core design and/or real-time operating systems., • Experience with all phases of the software project development life cycle, including software analysis, design, development, testing (including software unit testing), and automation tools., • Experience in Agile software development methodologies using an iterative, time-boxed development process (SCRUM)., • Experience/knowledge of Capability Maturity Model Integration (CMMI) systems and software development processes or other defined SW development processes., • Strong verbal and written communication skills., • Demonstrated ability to analyze and debug software and related hardware issues., • Experience working in or with FPGA design, development and test teams., • Radio communications or IP networking experience., • Experience with small team leadership including planning, coaching, tracking performance and identifying and applying course corrections to keep the team on track. In compliance with pay transparency requirements, the salary range for this role in New York State is $117,000 - $218,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-RK2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Sr. Specialist, Electrical Engineer (Digital Design) Job Code: 35551 Job Location: Rochester, NY Job Schedule: 9/80; Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: Successful candidate will have a strong Analog & Digital Electrical Engineering background and experience to support critical component shortages and other design activities for L3Harris tactical radio products and accessories. The individual will work closely with both the design engineering community and all operational resources to enable continuous manufacturing. Additional program support is also required to enable new business opportunities. Essential Functions: • Responsible for architecting, designing, developing, modifying, evaluating and integrating electronic equipment, electronic parts, components, or integrated circuitry for complex, high performance digital hardware systems., • Ability to prioritize tasks and issues based on technical challenge and revenue impact., • Diverse product development knowledge from component selection through change orders and factory implementation., • Analyzes electrical requirements to determine feasibility of design within time and cost constraints., • Hands-on experience with test equipments including oscilloscopes, spectrum analyzers, network analyzers, signal generators etc. to establish operating data, conducts experimental tests and evaluate results., • Includes the application of specialized skill sets including digital, analog, FPGA, DSP, CCA, power, antenna, and control systems knowledge as required. Provide timely and thorough response to issues that impact continuous production and generation of revenue in the JROC focus factories with staffing and problem-solving expertise., • Exposure to electronic circuit elements such as: ASICs, PLLs, DACs, Amplifiers and Power Supplies desirable, • Experience designing state of the art Analog & Digital electronic circuits, • Proven and effective communications skills and interpersonal skills, • Experience with Analog & Digital design, tuning, analysis and optimization, • Ability to utilize signal processing algorithms in FPGAs and software, • Experience with part selection and interfacing with manufacturers, • Able to test and support initial bring-up of prototype hardware, • Experience with detailed circuit level design verification testing, power savings analysis and optimization, • Perform electronic circuit design including schematic capture and layout knowledge, • Bachelors Degree in Digital Electrical Engineering preferred In compliance with pay transparency requirements, the salary range for this role in New York state is $92,500- $171,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Systems Engineering Job Code: 33684 Job Location: Rochester, NY Job Schedule: 9/80; Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: Join L3Harris Communication Systems as a Lead Systems Engineer, where you’ll play a critical role in designing and integrating advanced RF and networking solutions that enable mission-critical communications around the world. In this role, you’ll join our Network Engineering team, helping to shape advanced networked communication systems for our customers and helping support our proprietary platforms that model, test, and validate the performance of our cutting-edge tactical communication systems. You’ll work hands-on with both RF and networking technologies, bridging the gap between hardware and system-level design, while collaborating with diverse engineering teams across the organization. This is an opportunity to lead technical initiatives, influence architecture decisions, and see your work directly impact systems used in the most demanding operational environments. Essential Functions: • Lead networking system designs for next-generation communication products and systems., • Troubleshoot at both RF and system levels, supporting integration across multiple platforms., • Collaborate with Chief Engineers, program managers, and cross-functional teams to deliver robust, scalable solutions., • Prepare and deliver technical briefings for leadership and customers., • Drive continuous improvement, applying lessons learned from programs to future designs., • Oversee product development technical activities and system integration activities to ensure designs are technically sound and meet system level requirements., • Collaborate with other design, test, manufacturing, product service, program and product management teams, providing responsive services as part of the Netsim Team., • Ability to obtain a US Security Clearance. Technical Skills: • Comprehensive knowledge of LAN routing/switching protocols and standards, • Operational experience in Linux Operating Systems, • Operational experience in Windows/Windows Server Operating Systems, • RF and System Level Troubleshooting, • Basic mechanical and soldering skills Qualifications: • Bachelor’s Degree in Engineering or another STEM discipline and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience in networking., • Experience in Enterprise Networking and Applications Deployment, • Experience in RF troubleshooting and system-level integration. Preferred Additional Skills: • Cisco CCNA or greater certification, • Experience with Enterprise network services and hardware design, • Operational experience with Active Directory, DNS, Exchange, SharePoint, etc, • LAN routing/switching protocols and standards., • Experience in Linux and Windows operating systems., • Operation experience with military radio systems., • Demonstrated ability to work in a dynamic, team-oriented environment., • Demonstrated self-starter - efficient in achieving goals and proactive in pursuing subsequent tasks., • Proven team leadership skills, providing the technical voice for a project, program, or pursuit., • Demonstrated excellent verbal and written communication skills. Excellent inter-personal and communication skills, ability to interact with a cross functional team and act as customer interface for technical aspects., • Active US DoD Secret Clearance or Ability to obtain a US DoD Secret Clearance In compliance with pay transparency requirements, the salary range for this role in New York State is $110,500 - $205,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-RK2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

Job Description Krones Process Group North America (KPGNA) is a company specializing in process engineering and control system integration, employing Chemical, Mechanical, and Electrical engineers. We focus on providing automated process system solutions tailored for the food, beverage, and dairy sectors, offering custom designs and professional services aimed at optimizing manufacturing operations. KPGNA operates as a subsidiary of Krones AG, a global entity with a workforce exceeding 16,000 employees worldwide. We are currently looking for an Automation & Controls Engineer to become part of our expanding team. This position necessitates excellent communication abilities, adaptability in a dynamic environment, and a robust understanding of engineering principles. Position Overview As a Senior Automation Engineer, you will lead full project lifecycle (design through commissioning). Provide technical leadership and mentorship to entry and mid-level engineers. Serve as the primary client contact for automation scope. Contribute to standards developments and process improvements. 10+ years’ experience programming industrial controls in food, dairy, or beverage industries preferred. Job Duties and Responsibilities: • Develop control system architecture diagrams, • Design control panels and creating electrical schematics using AutoCAD, • Specify control system components, • Prepare system documentation, • Develop PLC I/O assignments, • Program PLCs using Allen-Bradley Logix platforms (5, 500, 5000), • Develop HMI/SCADA applications (FactoryTalk, Wonderware, iFix, Ignition), • Support clients on new and existing systems (remote and on-site), • Design industrial networks and specify data infrastructure, • Develop custom applications using VB.NET and SQL databases, • Participate in commissioning and startup activities at client sites, • Train client operations and maintenance personnel Qualifications: Education: Bachelor’s degree in electrical engineering or related discipline preferred Experience/Training: 10+ years’ experience programming industrial control systems in food, dairy, or beverage industries preferred. Technical Skills: • PLC and HMI programming (required), • AutoCAD (required), • Industrial networking concepts, • Database and application development (VB.NET, SQL), • Strong written and verbal communication skills, • Problem-solving and analytical thinking, • Ability to work independently and in team environments, • The work environment is a professional office environment where a conservative business dress code is in effect. The noise level in the work environment is usually moderate. While performing the duties of this job, the employee is regularly required to sit, use hands to type, handle, or feel; and talk or hear. Specific vision abilities required by this job include close vision, distance vision, and ability to adjust focus., • Equipment use includes computer, calculator, and telephone., • Ability to understand both spoken and written directions and good vision required., • Personal protective equipment required includes protective toed safety shoes and safety glasses with side shields, hardhat., • Appropriate OSHA and/or Krones Process Group North America safety training(s) are required., • Maintain a safe working environment and comply with all safety and environmental policies/procedures. Each employee is to place environment, health, and safety requirements as the first priority in the performance of their work duties. An employee is responsible for notifying their immediate supervisor of a violation or deficiency in working conditions and for recommending corrective measures, if possible. Additionally, the employee’s immediate supervisor is to be notified of every injury, illness or near miss., • Travel using automobile, planes, or other modes of transportation as needed up to 25%. Compensation details: 110000-145000 Yearly Salary PIf13fdbf1cea1-25405-40515273

Field Service Blow Mold Machinery - Greece, NY Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain Extrusion Blow Molding Injection Blow Molding or Injection Stretch Blow Molding Equipment Extruders Injection Molder Blow Molders Screw Plasticizers Screw Rotating Motors Guide Rails Moving Platens Heater Bands Hydraulic Pumping Systems Pneumatic systems Die Heads Dies Molds Mold Clamps Cold and Hot Cutters Blow Pins Control Panels Instrumentation Motion Controllers Motors Actuators Sensors Pumps Valves Gearboxes Cooling Fans Heating Bands _. Requires Field Service Engineer with experience on Blow Mold and track record installing, repairing, troubleshooting, and maintenance for new and prior installs of custom Bottle Molding Machinery. Activities: • Join and support commissioning team in field for customer machinery installation projects. • Train end users on start up, operation and shut down procedures. • Recommend after-sale parts and components to compliment production line set up and manufacturing capabilities. • Conduct follow-up visits for preventative and escalated maintenance issues. Experience: • 3+ years troubleshooting and repairing industrial manufacturing machinery and auxiliary equipment. • Track record with servo motion systems in machines. • Ability to use electrical, pneumatic and hydraulic diagrams and schematics to diagnose problems in Computer Controlled machinery. • Hands-on experience setting up and operating programable controls including updating software. • Re-routing three phase wiring for new product line requirements. Excellent hourly compensation and generous overtime rates, end of year bonus, full medical, dental and vision benefits, matched 401(k), almost no weekend requirements. Employee perks include tuition reimbursement, travel reimbursement, paid training and paid time off for personal days, sick days, and vacations, company pays for holidays. For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: Or email to: Please reference #43042NY454 when responding. Diedre Moire Corporation Education Requirements: High School Minimum Experience Requirements: 2-5 years Job City Location: Greece Job State Location: NY Job Country Location: USA Salary Range: $80,000 to $140,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain Extrusion Blow Molding Injection Blow Molding or Injection Stretch Blow Molding Equipment Extruders Injection Molder Blow Molders Screw Plasticizers Screw Rotating Motors Guide Rails Moving Platens Heater Bands Hydraulic Pumping Systems Pneumatic systems Die Heads Dies Molds Mold Clamps Cold and Hot Cutters Blow Pins Control Panels Instrumentation Motion Controllers Motors Actuators Sensors Pumps Valves Gearboxes Cooling Fans Heating Bands #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #fieldservicejobs #technicianjobs #MaintenanceMechanicJobs #PlasticJobs #BlowMoldingJobs DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call (609) 584-5499.

Key Responsibilities Project & Process Leadership • Lead cross-functional improvement projects focused on material flow, inventory control, and overall operational efficiency, • Collaborate with manufacturing, engineering, supply chain, and leadership teams to develop and implement practical, high-impact solutions, • Design and coordinate tooling and fixtures used in manufacturing operations, • Lead cost-reduction initiatives including consumable CNC tooling, raw material usage, labor efficiency, and variable overhead reduction, • Analyze operational data to identify trends, inefficiencies, and improvement opportunities, • Implement data-driven solutions that improve productivity, reduce waste, and lower operating costs, • Lead and sustain continuous improvement initiatives using Lean methodologies, including but not limited to:, • Value Stream Mapping, • Kaizen events, • Cycle Time vs. TAKT Time analysis, • 5S and Visual Management, • Cell and line design, • Material flow optimization, • TPM (Total Productive Maintenance), • Support new product introductions with a focus on manufacturability, process control, equipment capability, and scalability, • Partner with engineering and operations teams to ensure smooth transition from development into production, • Bachelor’s degree in Engineering or related discipline or equivalent experience (5+ years) in manufacturing environments such as:, • Manufacturing or Industrial Engineering, • Operations or Supply Chain, • Quality or Process Improvement, • Hands-on experience in CNC metals manufacturing is required, • Demonstrated ability to coach, mentor, and influence leaders and teams in the deployment of continuous improvement strategies, • Strong leadership, organizational, project management, and interpersonal skills, • CAD experience required; SolidWorks experience preferred

iWorld Professionals is seeking a Manufacturing Engineer to play a key role in bringing new products from concept through full-scale production while strengthening and advancing our manufacturing capabilities. This position is on site in Rochester New York. If you are interested to partner closely with Operations, Quality, and Engineering to ensure efficient, cost-effective, and high-performing production systems, then this is the position for you! Manufacturing Engineer Responsibilities: • Partner with cross-functional teams to transition new products into manufacturing, ensuring scalable, repeatable, and efficient production processes, • Develop, refine, and standardize assembly and test methods to improve throughput, quality, and cost performance, • Lead process improvement initiatives using data-driven analysis to identify trends, and enhance operational performance, • Design and implement tooling, fixtures, and automation solutions to support production and testing requirements, • Evaluate, justify, and manage capital equipment projects, including vendor coordination, specification development, and full project execution, • Establish and validate robust manufacturing processes through structured problem-solving and statistical analysis (DOE, SPC, capability studies), • Create and maintain clear manufacturing documentation, including work instructions, process flows, and standard operating procedures, • Optimize production layouts, workflow, and labor utilization to support capacity and efficiency goals Manufacturing Engineer Qualifications: • Bachelor’s degree in engineering or technical degree required., • 2+ years experience in a related engineering role, • Proficient in 3D Modeling, • Equipment integration, data collection, and process control, • Tooling, fixture design, and engineering drawing interpretation (GD&T), • Engineering design and modeling software proficiency, • Design for Manufacturing/Assembly and lean manufacturing principle, • Strong process and detail orientation., • Ability to work onsite in Rochester NY. Salary based on experience from $75,000 - $95,000 plus an excellent comprehensive benefits package. Apply today to iWorld Professionals for immediate confidential consideration. The salary or compensation shown is not a final offer amount as this may vary based on factors, including but not limited to, experience and geographic location. iWorld Professionals is an equal opportunity employer and considers employment to qualified applicants regardless of race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, or any other consideration made unlawful by federal, state, or local laws.

We are seeking a high performing Engineer to support R&D, scale-up, and process optimization in the energy and advanced materials sector. The ideal candidate brings hands-on experience across thin film coatings, polymer chemistry, electrochemistry, and lab-to-pilot scale operations. This is an onsite role in Rochester, New York. Annual salary is commensurate with experience. This role is well-suited for engineers passionate about next‑generation technologies such as: Thin‑film solar materials Solid-state or polymer electrolytes Advanced membranes and coatings Energy storage materials Sustainable fuels and catalytic processes Key Responsibilities: -Conduct experimental research on energy-relevant polymer systems, thin film coatings, and advanced material formulations. -Operate and troubleshoot laboratory thin-film fabrication tools. -Scale up chemistries from benchtop synthesis to liter-scale and continuous roll-to-roll manufacturing. -Use electrochemical characterization techniques such as cyclic voltammetry and EIS to characterize new materials. -Execute Design of Experiments (DoE) to improve material quality, purity, yield, and process reproducibility. Characterize materials using: UV/Vis spectroscopy Optical density measurements Rheology Mechanical/tensile testing Produce detailed documentation Present research findings and optimization results to engineering teams, technical sponsors, and external partners. Required Qualifications: -B.S. in Chemical Engineering, Mechanical Engineering, Chemistry or related discipline Strong academic foundation in: Transport phenomena Reaction engineering Thermodynamics Mass transfer Hands-on experience with: Thin-film coatings and materials processing Polymer formulation and testing Proficiency in: MATLAB Excel (including VBA) Microsoft Office Suite Strong communication skills, with experience presenting results to sponsors or stakeholders. Preferred Qualifications: -Experience with coin cell and/or pouch cell assembly -Familiarity with electrochemical characterization techniques such as electrochemical impedance spectroscopy and cyclic voltammetry. -Familiarity with roll-to-roll processing, scalable coating systems, or pilot-scale manufacturing. Knowledge of materials used in: Photovoltaics Hydrogen and energy systems Batteries or electrochemical devices Sustainable chemical processes

Senior Diamond Turning Engineering Technician Industry: Ultra-Precision Manufacturing | Advanced Optical Systems Location: Rochester, NY (Onsite) Travel: 10-15% (As needed) Reports to: Engineering Manager Compensation: $90-110K annual salary + variable compensation About the Opportunity A highly respected, growth-oriented advanced manufacturing organization is seeking a Senior Diamond Turning Engineering Technician to lead and elevate its Single Point Diamond Turning (SPDT) operations. This is not a standard CNC role. This position sits at the intersection of ultra-precision machining, tooling engineering, motion control optimization, and process innovation, supporting the production of optically functional surfaces manufactured at the limits of tolerancing. This is a role for someone who thrives on solving complex manufacturing challenges and pushing the limits of what’s possible in precision machining. The organization serves demanding, high-technology markets where precision is non-negotiable and performance expectations are extreme. This is a highly visible, high-impact role within a technically sophisticated environment. Why This Role is Unique • Work on optically critical components requiring extreme form and finish precision., • Influence machining strategy, tooling design, and machine control at a systems level., • Drive measurable improvements in yield, throughput, and process capability., • Operate in a collaborative, engineering-driven culture., • Mentor and shape the next generation of ultra-precision technicians., • Be the technical authority in a high-performance SPDT environment. Key Responsibilities Ultra-Precision Machining & Process Development • Lead setup, programming, and operation of SPDT machine tools for ultra-precision optical components., • Develop and optimize machining processes to meet extreme form and surface finish requirements., • Generate and refine advanced CNC toolpaths using Mastercam and related platforms. Diamond Tool & Fixturing Engineering • Design and optimize custom diamond cutting tools (geometry, edge prep, application tuning)., • Engineer advanced fixturing/workholding systems to ensure alignment and repeatability., • Collaborate with internal teams and external vendors to improve tool performance and lifecycle. Machine Performance & Controls Optimization • Analyze machine dynamics including vibration, spindle behavior, and thermal effects., • Perform PID tuning and motion control optimization., • Troubleshoot process deviations using structured root cause analysis. Technical Leadership & Continuous Improvement • Partner with Quality, Metrology, and Production teams to ensure inspection alignment., • Drive improvements in cycle time, yield, and process capability., • Provide technical mentorship to diamond turning technicians across shifts. Maintenance & Process Governance • Ensure preventative maintenance and machine condition monitoring., • Maintain rigorous process documentation and parameter control., • Uphold precision manufacturing safety and cleanliness standards. Required Qualifications • 5+ years of diamond turning experience in ultra-precision manufacturing., • Advanced proficiency in Diffsys and Mastercam., • Proven expertise in diamond tool design and optimization., • Experience designing advanced fixturing for tight-tolerance components., • Strong knowledge of motion control systems and PID tuning., • Demonstrated ability to improve process capability and surface quality. Preferred Qualifications • Background in optical component manufacturing., • CNC machining and advanced metrology experience., • Experience with closed-loop compensation strategies or automation integration. Precision Talent Partners, LLC values diversity and is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive workplace where all employees feel respected, supported, and empowered to contribute. This description reflects management’s assignment of essential functions and does not restrict the tasks that may be assigned. Employment is at-will, and this job description does not constitute a contract of employment.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Lead, Systems Engineering Job Code: 33684 Job Location: Rochester, NY Job Schedule: 9/80; Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: Join L3Harris Communication Systems as a Lead Systems Engineer, where you’ll play a critical role in designing and integrating advanced RF and networking solutions that enable mission-critical communications around the world. In this role, you’ll join our Network Engineering team, helping to shape advanced networked communication systems for our customers and helping support our proprietary platforms that model, test, and validate the performance of our cutting-edge tactical communication systems. You’ll work hands-on with both RF and networking technologies, bridging the gap between hardware and system-level design, while collaborating with diverse engineering teams across the organization. This is an opportunity to lead technical initiatives, influence architecture decisions, and see your work directly impact systems used in the most demanding operational environments. Essential Functions: • Lead networking system designs for next-generation communication products and systems., • Troubleshoot at both RF and system levels, supporting integration across multiple platforms., • Collaborate with Chief Engineers, program managers, and cross-functional teams to deliver robust, scalable solutions., • Prepare and deliver technical briefings for leadership and customers., • Drive continuous improvement, applying lessons learned from programs to future designs., • Oversee product development technical activities and system integration activities to ensure designs are technically sound and meet system level requirements., • Collaborate with other design, test, manufacturing, product service, program and product management teams, providing responsive services as part of the Netsim Team., • Comprehensive knowledge of LAN routing/switching protocols and standards, • Operational experience in Linux Operating Systems, • Operational experience in Windows/Windows Server Operating Systems, • RF and System Level Troubleshooting, • Bachelor’s Degree in Engineering or another STEM discipline and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experience in networking., • Experience in Enterprise Networking and Applications Deployment, • Cisco CCNA or greater certification, • Experience with Enterprise network services and hardware design, • Operational experience with Active Directory, DNS, Exchange, SharePoint, etc, • LAN routing/switching protocols and standards., • Experience in Linux and Windows operating systems., • Operation experience with military radio systems., • Demonstrated ability to work in a dynamic, team-oriented environment., • Demonstrated self-starter - efficient in achieving goals and proactive in pursuing subsequent tasks., • Proven team leadership skills, providing the technical voice for a project, program, or pursuit., • Demonstrated excellent verbal and written communication skills. Excellent inter-personal and communication skills, ability to interact with a cross functional team and act as customer interface for technical aspects. #LI-RK2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer Job Code: 36888 Job Location: Rochester, NY Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week Job Description: The successful candidate will join a team of dedicated professionals who are responsible for supporting military communication products throughout their lifecycle. As a Product Support Engineer you will be tasked with investigating a variety of problems related to Analog, Digital, and RF. Candidates with experience in any of these areas will be considered. Working from our lab adjacent to manufacturing you will collaborate across multifunctional teams to diagnose problems to component level, determine solutions via experimentation and simulation and implement corrective actions. As an extension of design engineering, you will have the opportunity to learn and grow while providing electrical engineering support to technicians and junior engineers. As new products are launched you will interface across engineering, assisting with root cause analysis, troubleshooting of prototypes and ensuring a successful launch into full-rate production. Typical tasks include: • Monitoring daily factory yields, investigating failures, and determining corrective actions., • Mitigating component shortages through selecting and qualifying alternatives or redesigning circuits and sub-assemblies., • Determining design, process, and test improvements to increase test yields and product quality., • Working as part of a cross-functional team to meet manufacturability, testability and other DFx requirements for volume production., • Working with other engineering teams to make necessary circuit changes prior to and during the launch of new products., • Working to mitigate component obsolescence throughout the product lifecycle., • Provide guidance to junior staff by providing assistance as they investigate problems., • Lead investigations, coordinate tasks, and direct junior staff as required., • Work with Quality and Supply Chain to address material discrepancies., • Troubleshooting unit, modules, and boards to the component level., • Support digital and related analog hardware designs., • Hardware troubleshooting ability to component level for analog and digital circuits., • Ability to work independently and within a team setting., • Ability to design and conduct engineering experiments and act upon test results., • Design and analysis of circuits and components utilizing various simulation tools., • Experienced in leading small technical design or troubleshooting team, providing direction and prioritizing tasks to meet target yields and shipments., • Ability to work in a fast-paced environment interfacing with multiple teams across the organization., • Ability to use typical lab equipment: Oscilloscope, DMM, Spectrum & Network analyzers, logic analyzers and signal generators., • A driven person that wants to learn and is a proven problem solver., • Able to analyze designs and communicate technical information to support staff., • Experience with tactical radios is a plus., • Experience reading schematics and datasheets, probing circuits and understanding proper circuit operation., • Troubleshoot circuit assemblies to component level, • Ability to select alternate electronic components and know what testing is required to qualify them., • Working knowledge of LabVIEW and Jira a plus. #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Sr Associate, Systems Engineer (Space Optics) Job Code: 36093 Job Location: Rochester, NY Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Job Description: The L3Harris space superiority and imaging systems engineering department is seeking a systems engineer to join our team and support programs that we have recently won. The department specializes in space-based, small and large aperture visible and infrared telescopes with integrated electromechanical devices used for motion and focus control. The successful candidate will assist in performing technical analysis, managing specifications, and generating design reviews and technical documents. Additional responsibilities include leading the test and design verification, requirements sell off, and end item data package (EIDP) generation efforts. Essential Functions: • Support product test and design verification, requirements sell-off, risk assessments and mitigations, end item data package generation efforts, • Excellent oral and written communication skills., • Strong organizational and time management skills., • Ability to work independently as a member of a multi-disciplined integrated product team., • Engage in continuous process improvement initiatives to enhance engineering efficiency and effectiveness., • Bachelor’s Degree and a minimum of 2 years of prior related experience. Graduate Degree or equivalent with 0 to 2 years of prior related experience. In lieu of a degree, minimum of 6 years of prior related experience., • Professional experience in systems engineering role supporting requirements, design, manufacturing, and integration of systems, • Professional experience working with MBSE tools and methodologies, • Active Secret or Top Secret/SCI clearance is preferred, • Technical Subject Matter Expertise in optical, electro-optical, electrical, mechanical, electromechanical, or equivalent engineering discipline., • Relevant experience with the design, manufacture, integration, test and sell-off of space-based EO/IR subsystems., • Cameo Systems/No Magic Model-based systems engineering (MBSE), SysML, • Ability to manage multiple and competing priorities., • Ability to support program milestone reviews (SRR, SDR, PDR, CDR, FCA/PCA, PSR)., • Ability to collaborate across all levels of leadership., • Work collaboratively with others and complete assignments with a team-oriented approach., • Strong communication and interpersonal skills – taking complex concepts and sharing with others., • Ability to architect an end-to-end space system with a full understanding of the product lifecycle., • Experience with project management aspects of technology development programs. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

We're seeking industrial or mechanical engineers to help train AI-powered robotics systems for commercial and manufacturing environments. The ideal candidate is an industrial or mechanical engineer with hands-on experience in manufacturing floor operations, sensor reading, equipment monitoring, and

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, System Engineering (Space Optics) Job Code: 36095 Job Location: Rochester, NY Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Job Description: The L3Harris space superiority and imaging systems engineering department is seeking a systems engineer to join our team and support programs that we have recently won. The department specializes in space-based, small and large aperture visible and infrared telescopes with integrated electromechanical devices used for motion and focus control. The successful candidate will be a technical point of contact and IPT, performing technical analysis, managing specifications, and generating design review and technical documents. Additional responsibilities include leading the test and design verification, requirements sell off, and end item data package (EIDP) generation efforts. Essential Functions: • Systems engineering experience in passive/active electro-optical hardware, • Perform technical analysis, manage specifications, and generate design review, requirements, specifications, interface, and technical documents., • Support product test and design verification, requirements sell-off, risk assessments and mitigations, end item data package generation efforts, • Engage in continuous process improvement initiatives to enhance engineering efficiency and effectiveness., • Coordinate with cross-functional teams to ensure integration and compatibility of all system components and provide technical leadership and guidance throughout the entire project lifecycle., • Utilize systems engineering tools and methodologies to support model-based systems engineering (MBSE)., • Bachelor’s Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience., • Professional experience in a systems engineering role supporting requirements, design, manufacturing, and integration of systems, • Professional experience working with MBSE tools and methodologies, • Candidate with an active Top Secret/SCI clearance is highly desirable., • Technical Subject Matter Expertise in optical, electro-optical, electrical, mechanical, electromechanical, or equivalent engineering discipline., • Relevant experience with the design, manufacture, integration, test and sell-off of space-based EO/IR subsystems., • Cameo Systems/No Magic Model-based systems engineering (MBSE), SysML, • Ability to manage multiple and competing priorities., • Ability to support program milestone reviews (SRR, SDR, PDR, CDR, FCA/PCA, PSR)., • Ability to collaborate across all levels of leadership., • Work collaboratively with others and complete assignments with a team-oriented approach., • Strong communication and interpersonal skills – taking complex concepts and sharing with others., • Ability to architect an end-to-end space system with a full understanding of the product lifecycle., • Experience with project management aspects of technology development programs. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Welding Engineer to join our team. We are looking for individuals that will be responsible for developing welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Key Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred. • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification. • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding. • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements. • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organizations safety, quality, operational performance, customer satisfaction, and overall financial health of the company.Qualifications:, • Experience in welding process development, • Experience in use of robotics. Computer Skills: To perform this job successfully, an individual should have knowledge and proficiency in the use of Microsoft Word, Microsoft Excel, Outlook, and Solidworks. Experience with robotic programming. * Other Requirements: To perform this job successfully, an individual must have the ability to read blueprints, knowledge of business practices/protocols, and be able to maintain confidential information. * Good communication skills with the ability to develop reports and verbally communicate with different levels inside and outside the organization. * • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point., • Experience with MRP software, PLEX preferred. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. * Reasoning Ability: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit, use of computer keyboard, maneuver through the office and factory, use a 10-key calculator, and communicate with customer and management in person, by email or via telephone, and the Associate is occasionally required to lift and/or move up to 50 pounds. * PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. * Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Aerospace Engineer Job Duties: Contributes to the design, manufacturing, and testing of aircraft and aerospace products.

Develops manufacturing processes by designing and modifying equipment for building and assembling electrical components; soliciting observations from operators. Assures product quality by designing electrical testing methods; testing finished products and system capabilities. Electrical Engineer Job

Akkodis is seeking a Manufacturing Engineer for a 12+ Contract position with a client located in Rochester, NY. Familiarity with machinery, machine building, and precision engineering.

Job Description Xactra Technologies is looking to add a 1st Shift CMM Programmer/Quality Engineer to our growing company! We are looking for someone with an Aerospace and Defense background to join our talented team! The CMM Programmer/Quality Engineer will work collaboratively with the Quality Assurance and Engineering personnel to support quality engineering requirements for customers, suppliers, and internal QMS systems. Responsible for providing statistical information for quality improvement by identifying testing methods and samples and ensuring customer requirements are satisfied Job Requirements • Computer Skills, • GD&T Codes, • CAD, • QMS (AS9100, ISO 9001, ISO 13485) System standards and internal audit experience, • Knowledge of various vision systems (Smart-Scope, Oasis, Keyence) and Zeiss Calypso & PC-DMIS CMM Programming, • Works closely with the manufacturing team to ensure quality protocols are followed documentation is correctly maintained and implement any new changes or adaptations based on quality review., • Identifies and records any problem relating to the product, process, and QMS., • Provide inspection support that includes: first article, in-process, and end item quality., • Associate degree, technical/trade school training or equivalent with a minimum of 5 years related experience., • Knowledge of computer operations and applications is required., • Must be able to read and comprehend engineering drawings, sketches, and verbal and written communications to accomplish the job at hand., • GD&T, • Precision Measurement & Hand Metrology, • Coordinate Measuring Machine (CMM) (Zeiss)

Job Description ESTIMATOR Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. DUTIES & RESPONSIBILITIES Estimators accurately project the cost of upcoming projects, to ensure that a project is handled in a way that is profitable. The Estimator is responsible for establishing how long a project will take to complete and how much it will cost. The Estimator also collects material and finish costs and is able to function as a Process Engineer, as needed. • Establish and maintain accurate cycle times for CNC machining operations, including mills and lathes., • Generate and analyze cost estimates for production jobs., • Collect and track material costs to support accurate pricing and budgeting., • Functions as a member of a customer-driven quality team, ensuring product quality requirements are met with limited supervision and a strong commitment to quality., • Demonstrates strong communication, teamwork, and interpersonal skills, with the ability to remain diplomatic and work effectively with others., • Takes accountability for meeting project commitments, effectively prioritizing tasks, multitasking, and maintaining flexibility to meet deadlines in a fast-paced environment., • Possesses thorough operational knowledge of assigned equipment and the ability to operate it safely and efficiently., • Accurately tracks and records time spent and materials used., • High school diploma or equivalent required, associate's degree preferred., • Vocational or Trade School a plus, but not required., • At least five year's experience in manufacturing or related field., • Working knowledge of CNC machining processes, including mills and lathes, with the ability to estimate cycle times and tooling requirements., • Ability to interpret technical drawings, blueprints, and GD&T., • Vacation, • Paid Sick Leave, • Holidays, • Medical, • Dental, • Vision, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with Company Match According to the New York Pay Transparency law, pay range for this job is $90,000 - $125,000 / annual salary. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Gender/Sexual Orientation/Gender Identity/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job DescriptionResponsibilities: • Check for completeness, • Verification against contractual requirements, • Proof of functionality by either a conventional function test or simulation, • Final inspection of equipment and components, • Conducts quality control inspections of in-process and pre-shipment products at local facilities., • Inspection duties include, but are not limited to: visual (workmanship) evaluation, functional testing as applicable (measurements, assembly, etc.), packaging & labeling verification, etc., • Provides timely, detailed reports and photographic evidence of product, packaging, labeling, defects noted, etc.Technical & Industry Experience:, • 5 years of Mechanical Quality Engineer experience, • Mechanical engineering degree, • Experience with Visual/Dimensional/Welding inspection., • Knowledgeable on Metrology, know how to handle Calipers / Micrometers., • Experience with Factory Acceptance Test (FAT) in industrial equipment, machinery, components, products and materials., • Experience as a quality inspector, or applicable manufacturing experience in specified industries (CQE preferred), • Experience with ANSI Z1.4 sample size determination and AQLs (training available), • Ability to lift at least 20lbs as necessary, • Must be able to use MS Word and Excel to submit documents and reports within the time specified (usually within 24 hours after job completion), • Ability to work well in independent and group problem-solving situations, • Ability to maintain a positive, professional disposition when adapting to occasional disruptions and unexpected events, • Flexibility in scheduling Job Type: 1099 Contractor Project Duration: • Note: This is a 1099 contract role project duration may vary based on client needsShift Hours: shift time may fluctuate., • Note: As a 1099 contractor, project schedules may vary depending on site availabilityLocation:, • Must be able to travel to Buffalo, NY and nearby areas

Bachelors degree in mechanical engineering, Material Science, Engineering Physics, or equivalent AND 3+ years of experience in fabrication, packaging, or manufacturing of semiconductor devices. Position Summary, Packaging Process Engineer. NY Creates is looking for a Packaging Process Engineer to wo

Job Description Job Summary: We are seeking a highly skilled Senior Mechanical Engineer specializing in HVAC systems within manufacturing environments. This role is responsible for the design, optimization, and maintenance of HVAC systems that support production processes, environmental control, and regulatory compliance. The ideal candidate has strong experience in industrial ventilation, process cooling/heating, and contamination control, with a focus on reliability, efficiency, and safety in manufacturing operations. Key Responsibilities: • Lead the design and engineering of HVAC systems for manufacturing facilities, including process ventilation, dust collection, cleanrooms (if applicable), and thermal control systems., • Perform heating and cooling load calculations based on process requirements, occupancy, and equipment heat loads., • Design ductwork, piping, and equipment layouts to support production efficiency and environmental standards., • Select and size HVAC equipment such as chillers, boilers, air handling units (AHUs), exhaust systems, and filtration systems., • Ensure systems meet regulatory requirements (e.g., OSHA, EPA) and industry standards (e.g., ASHRAE)., • Support plant operations by troubleshooting system issues, improving performance, and minimizing downtime., • Collaborate with production, maintenance, EHS (Environmental Health & Safety), and facilities teams., • Lead or support capital projects, including system upgrades, retrofits, and new facility expansions., • Conduct energy assessments and implement efficiency improvements to reduce operating costs., • Oversee installation, commissioning, and validation of HVAC systems in manufacturing settings., • Develop and maintain engineering documentation, SOPs, and preventive maintenance strategies., • Mentor junior engineers and provide technical leadership across projects. Qualifications: • Bachelor’s degree in Mechanical Engineering., • 7+ years of HVAC engineering experience, with a strong focus on manufacturing or industrial environments., • In-depth knowledge of industrial HVAC systems, including process ventilation, make-up air systems, and environmental controls., • Proficiency in engineering and design tools (e.g., Solid Works, AutoCAD, Revit, HAP, TRACE or similar tools., • Familiarity with energy codes and sustainability standards (e.g., UL 60335-2-40, LEED). Skills & Competencies: • Strong analytical and problem-solving abilities in complex industrial systems., • Excellent project management and organizational skills., • Ability to work cross-functionally with operations and engineering teams., • Strong communication skills, both technical and non-technical., • Focus on safety, compliance, and continuous improvement. Work Environment: • Mix of office, production floor, and fieldwork in manufacturing facilities., • Exposure to industrial conditions such as noise, heat, dust, and mechanical equipment., • May require occasional travel between plant sites. Preferred Experience: • Experience with large-scale commercial or industrial HVAC systems, • Knowledge of building automation systems (BAS), • Experience in sustainable design and energy efficiency projects

Job Description QUALITY ENGINEER Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are looking for a Quality Engineer to monitor and improve the quality of our operational processes and outputs. The Quality Engineer’s responsibilities include designing quality standards, equipment, process, and products, developing quality control systems, and determining corrective actions. You will also work with managers and supervisors to implement quality measures. A successful Quality Engineer should have excellent troubleshooting skills and be able to ensure that processes and products consistently meet established quality standards. DUTIES & RESPONSIBILITIES: • Review customer quality specification/PO flow downs, codes and technical design documents/drawings to provide an accurate inspection plan., • Participate in contract review meetings to initiate and advise on inspection plans., • Utilize HQA Inspection Manager software to bubble drawings, create FAI reports, and identify critical dimensions to be verified and recorded on an in-process inspection report., • Develop quality plans for manufacturing based on customer RFQ., • Collaborate with operations managers to develop and implement controls and improvements., • Ensure that workflows, processes, and products comply with safety regulations., • Investigate and troubleshoot product or production issues., • Develop corrective actions, solutions, and improvements., • Monitor and analyze quality performance., • Update our Quality Management System (QMS) with incidents, fixes and improvements., • Manage calibration system in Inspection Manager Software., • Assign gauging to check critical dimensions., • Work with customers regarding quality questions and issues. SKILLS & QUALIFICATIONS: • Hands on experience with Quality Management Systems (QMS) and testing methodologies., • In-depth understanding of technical documentation., • In-depth understanding of machining and sheet metal fabrication including print reading and GD&T., • Strong analytical and problem-solving skills., • Excellent project management skills., • Solid computer and organizational skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Superior communication skills and ability to develop teamwork among staff., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • High school diploma or GED., • 5 years of experience in Quality Engineering, Quality Assurance, or a similar role., • Additional certification in Quality Assurance is a plus. JOB BENEFITS: • Vacation, • Paid Sick Leave, • Holidays, • Health, • Dental, • Vision, • Life Insurance, • Voluntary Disability Insurance, • 401(k) Plan with company match According to the New York Pay Transparency law, pay range for this job is $25.00 - $35.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week) Monday through Friday 7:30 am to 4:00 pm Full-Time employment (39.75 hours per week)

Job Description Insero Talent Solutions is recruiting a Supplier Quality Engineer for a manufacturing company in Rochester, NY. General Responsibilities: Responsible for supporting supplier quality and development, supplier strategic initiatives, assessing QMS systems, and proactively working on improved incoming components / material (reduced DPPM). Specific Duties: • Work Cross-functionally with Engineering, Manufacturing, Purchasing, and internal Quality Engineers to assess risk and approve suppliers for new and existing products, • Works with suppliers to ensure compliance to requirements, assessing risk, identification of critical characteristics, approval and verification of corrective and preventative actions, • Review and approve supplier Production Part Approval Process (PPAP) and First Article Inspection Reports (FAIR) for new part introduction and existing part revisions, • Facilitates Advanced Product Quality Planning (APQP) requirements including, determination of control plans, process instructions, inspection and testing requirements, statistical process control (SPC), and calibration & measurement system analysis, PFMEAs, • Participate in the MRB process to identify, evaluate, and dispose of nonconforming product, • Lead root cause analysis and corrective action with suppliers, • Process Supplier Waivers, • Conduct timely and compliant supplier audits as required, • Ability to work effectively in a fast-paced environment with short deadlines, • Works with various quality systems: ISO 9001, AS 9100, IATF 16949 and ISO 14001, • Support Company's internal quality auditing process as required, • Strong knowledge of Six Sigma methodology, problem solving tools, and advocates utilization throughout the organization, • Travel to suppliers as needed (approximately 30%) Qualifications: • 5-7 years minimum experience functioning in a quality or supplier quality role with a strong knowledge in commodities including machining, electronics, raw materials, hardware, and special processes required, • Bachelor's degree in an engineering or technical field required, • Familiarity with manufacturing of components (i.e. ; Machining, Castings/Forgings, Injection Molding, Metal fabrication stampings, electronics, plating) as well as raw materials including various metals and plastics, • Experience with APQP and PPAP including the use of Control Plans and Process Flow Diagrams Comprehensive understanding of Failure Mode Effect Analysis (FMEA) including Design (DFMEA) and Process (PFMEA), • Experience with advanced Quality Management Systems: AS9100 and IATF 16949, • Strong background with various supplier tools/activities including corrective actions, problem solving supplier audits, supplier score cards and risk assessments, • Strong statistical analysis and mathematical ability including Measurement Systems Analysis and Capability Studies, • Experience with GD&T metrology, inspection/testing procedures and methodology, • Problem solving tools such as the Shainin System (Red-X method) and 8D Analysis highly desirable, • Maintain positive supplier relations, which will require some travel to customers and supplier (up to 30%), • Black Belt certification is preferred, • Excellent communication skills (written and verbal), • Self-starter with minimal supervision, • ASQ certification (CQE & CQA) is a plus

Job Description Job Summary: The Coating Engineer provides engineering support for vacuum thin-film coating processes used in the manufacturing of optical components. This role working closely with other engineers and manufacturing staff. Essential Duties and Responsibilities: • Provide engineering support for PVD optical coating production, spanning development, production support, and process sustainment., • Work closely with design, and other manufacturing teams to transition coating solutions into stable and repeatable production processes., • Support Operations through guidance on substrate preparation, cleaning methods, coating materials, process parameters, tooling, and manufacturing improvements., • Assist shop-floor personnel with the setup, operation, and interpretation of optical thin-film measurement and characterization tools., • Investigate and resolve coating-related challenges in a production setting, including process evaluation, data analysis, and documentation of findings., • Present technical considerations, risks, and tradeoffs to leadership to aid project planning and operational decision-making., • Enhance coating designs and deposition processes with a focus on yield, performance consistency, scalability, and cost control., • Drive problem-solving and corrective action efforts for coating process issues using structured analysis methods., • Develop and deliver training to technicians on optical coating processes, equipment use, and standard operating practices., • Track process performance and lead initiatives aimed at continuous improvement and manufacturing efficiency., • Support the optimization and troubleshooting of optical coating equipment and associated processes., • Raises individual performance to a level that results in proactive responses to problem solving and continuous improvement., • Performs other related duties and assignments as required, depending on candidate skill set and on an as-needed basis to support evolving business needs. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 40 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate. Education, Skills and Experience: • Bachelor’s degree in optical, electrical, manufacturing or mechanical engineering. Experience will be considered in lieu of degree., • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Proficiency in coating design software and optical simulation tools., • Basic analytical skills, including basic statistical analysis., • Basic computer skills, including Microsoft Office and Windows operating systems., • Must possess experience related to troubleshooting and repairing optical coating chambers., • Availability outside of normal business hours to answer technical related questions., • Good oral and written communication skills., • Strong time management skills., • Work independently with minimal supervision.

Job DescriptionDescription: About Us G&H is a world leader in optical designing, testing and manufacturing. As experts in the technology of light, G&H works with customers to provide optical systems, assemblies, and components for demanding applications. Headquartered in Ilminster Somerset, UK with primary operations in the USA and Europe, G&H is recognized for the breadth of their acousto-optic, electro-optic, crystal-optic, fiber optic, and precision optic products. G&H is recognized as the preferred source for OEMs in the life sciences, industrial, and aerospace and defense industries, with a history of quality and excellence that dates back over seventy-five years. G&H offers exciting and rewarding opportunities for motivated and talented people to join a team of like-minded, highly skilled colleagues who want to grow and succeed with our company. Hiring talent to complement and grow our current teams’ skills and capabilities is a strategic priority to enable our plans for growth. Our seven business locations in the United States and four UK-based businesses employ across a broad range of functions including engineering and process, manufacturing, product management, supply chain and customer services, quality assurance, continuous improvement, compliance and finance. Position Summary This is a hands-on Quality Engineering role supporting high-precision optical manufacturing. The Quality Engineer is responsible for verifying product conformance to customer specifications, developing inspection and test methods, and partnering closely with manufacturing teams to drive process improvement and root cause analysis. The role requires strong analytical skills, engineering aptitude, and the ability to work across cross-functional teams in a fast-paced production environment. Key Responsibilities Quality Assurance & Inspection • Develop and implement inspection and test protocols to ensure product conformance, • Perform dimensional and functional measurements using advanced metrology equipment, • Validate test methods, fixturing, and measurement systems, • Analyze inspection data and present findings to internal stakeholders, • Create First Article Inspection Reports (FAIR) and communicate results and recommendations New Product Introduction (NPI) Support, • Partner with Program Management and Engineering to support new product launches, • Develop work instructions, inspection methods, and custom fixtures, • Support inspection activities during new tool and process development, • Analyze measurement data to identify trends, correlations, and improvement opportunities, • Apply statistical methods to support decision-making and process validation Production & Continuous Improvement, • Collaborate with Quality and Production teams to support ongoing manufacturing, • Troubleshoot quality issues and support disposition of nonconforming material, • Participate in Material Review Board (MRB) activities, including root cause and corrective actions, • Drive continuous improvement in inspection methods, fixtures, and documentation, • Apply knowledge gained from new products to improve existing processes Quality Systems & Compliance, • Support ISO 9001 Quality Management System requirements, • Perform internal audits and support external audits as needed, • Manage calibration programs for inspection equipment, • Ensure adherence to quality standards and regulatory requirements Technical Expertise & Training, • Become a subject matter expert in inspection and metrology equipment, • Program and operate measurement systems (e.g., CMMs, interferometers, profilometers), • 3–5 years of experience in manufacturing and/or metrology, • Experience in precision component manufacturing (optics or injection molding preferred), • Experience with quality tools (root cause analysis, SPC, Six Sigma, variation control), • Experience working in an ISO 9001 and/or ISO 13485 environment, • Internal or supplier auditing experience preferred Technical Skills, • Working knowledge of GD&T (Geometric Dimensioning & Tolerancing), • Experience with 3D CAD (SolidWorks preferred), • Hands-on experience with metrology equipment such as:, • CMM (Mitutoyo, Zeiss, OGP or similar), • Interferometers (e.g., Zygo), • Profilometers and optical test systems, • Proficiency in Microsoft Excel (advanced skills preferred), • Familiarity with ERP/MRP systems (Syspro or similar preferred) Core Competencies, • Strong analytical and problem-solving skills, • Ability to interpret technical drawings and specifications, • Effective communication and cross-functional collaboration, • Continuous improvement mindset with strong attention to detail, • Ability to translate data into actionable insights, • Strong organizational and time management skills Physical Requirements, • Ability to stand and walk for extended periods (up to 8 hours), • Frequent use of hands and fine motor skills for inspection tasks, • Ability to lift up to 30 lbs occasionally, • Visual acuity including close vision, depth perception, and focus adjustment Work Environment, • Manufacturing environment with exposure to production equipment and machinery, • Use of precision measurement tools and inspection systems ADDITIONAL NOTES This job description is not intended to be exhaustive in every respect, but rather to clearly define the fundamental purpose, responsibilities and dimensions for the role. Therefore, this job description does not describe any individual role holder. In addition to the contents of this job description, employees are expected to undertake all other reasonable and related tasks allocated by their line manager. The Company is committed to providing equal employment opportunities for all employees and applicants for employment. The Company does not discriminate in employment opportunity or practices on the grounds of gender, race, religion or belief, age, disability, sexual orientation, gender identity, protected veteran status, or any other characteristic protected by national laws under which the Company operates. Please note that this position will involve having access to items and technical data that may be controlled under U.S. export laws and regulations ("U.S. Export Control Laws"), including but not limited to the Export Administration Regulations ("EAR") and the International Traffic in Arms Regulations ("ITAR"). To comply with the U.S. Export Control Laws, G&H must assess whether candidates are "U.S. persons" as defined under the EAR (15 C.F.R. Part 772) and the ITAR (22 C.F.R. § 120.15). Certain questions asked during the application process are intended to assess this and will be used for compliance purposes only. Requirements:

Job Description Job Title: QED Optics Manufacturing Engineer Grade: 10 QED Technologies serves the precision optics industry. QED’s customers span the globe and include the world’s leading precision optics manufacturers. Based in Rochester, NY, QED is able to capitalize on the area's academic and industrial resources in the field of precision optics manufacturing and engineering to provide innovative products that set new standards in manufacturing precision optics. Please visit our web site for more information on QED Technologies. Summary Conducts the manufacture of precision optical components for a wide variety of customers by performing the following duties: Quoting • Works closely with customers to gain an understanding of their technical and schedule needs, the details of their application, and any cost / performance trades., • Creates work instructions and monitors their execution by technician staff during optical component fabrication, • Independently executes production work instructions from start to finish, • Drives manufacturing process efficiencies through process parameter optimization, • Designs metrology setups to support full aperture metrology of optical components, including fixturing and tooling that may be required. Develops error budgets to validate optical tests against customer requirements., • Analyzes surface/wavefront data acquired from various metrology setups to optimize process decisions., • Designs fixturing and tooling to support subaperture polishing processes, • Trains others on the proper use and application of metrology and subaperture polishing equipment, • Interacts with other engineering groups (software, systems, optical, mechanical, applications, etc) as needed to support project goals., • Prepares written technical reports and new technical proposals as needed for projects., • Interacts with customers to provide periodic status updates and support technical discussions., • Takes part in authoring technical papers and presenting at conferences. An individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Critical Skills: • Ability and experience with hand tools, measurement devices (calipers, Micrometers, Indicators, Gages etc)., • Understanding of metrology setups and conventional fabrication techniques, • Ability to draft work procedures and coordinate with technicians regarding processes and process improvements Bachelor's degree in Optics, Optical Engineering, Mechanical Engineering or Manufacturing Engineering or related field is preferred; 1 to 2 years of related experience in the aforementioned areas is desired*. (* An equivalent combination of education and experience will be considered.). Computer Skills To perform this job successfully, an individual should have knowledge of the Microsoft Office Suite and Database software. Experience with CAD software to support fixture and tooling design is desired. The manufacturing engineer will be expected to become proficient with QED’s manufacturing and analysis software tools. The candidate should be able to provide a minimum of 2 references. Any technical papers a candidate has authored should also be submitted The position will be based in Rochester, NY. Relocation will not be provided for this position. QED Technologies International is an equal opportunity employer. We value diversity, but due to our ITAR status, we do not provide visa sponsorship. All applicants must be authorized to work in the United States and not require visa sponsorship now of in the future. When not traveling, the Associate Field Service Engineer will be expected to work from the 1040 University Avenue, Rochester, NY location QED offers a generous benefit package which in includes a discretionary bonus.

Job DescriptionProcess Development Engineer – SolarSummaryThe Process Development Engineer is responsible for developing, implementing, and optimizing thin-film coating processes to support stable, high-volume production of photovoltaic (solar) modules.Reporting StructureReports to: VP, ManufacturingLocationRochester, NY areaKey ResponsibilitiesProduct R&D • Design and execute experiments to develop and improve materials and manufacturing processes for enhanced product performance, • Conduct lab and pilot-scale testing; analyze results and recommend next steps, • Monitor product and process performance throughout development cycles, • Evaluate data and identify continuous improvement opportunities, • Perform material characterization using tools such as SEM, AFM, XRF, and profilometry, • Support implementation of in-line metrology tools to ensure coating quality and consistencyManufacturing Development, • Optimize processes for high-volume, stable production environments, • Develop and maintain process documentation and SOPs, • Define equipment requirements and assist with vendor selection, • Support production cost estimation and process efficiency improvements, • Ensure compliance with environmental, health, and safety regulations, • Assist with production line layout and scale-up activitiesRequired Qualifications, • Experience developing thin-film products and manufacturing processes, • Knowledge of roll-to-roll processing (unwinding/winding, splicing, coating, laminating, web handling), • Exposure to manufacturing or production environments, • Experience with at least one of the following:, • Gravure coating, • Slot die coating, • Flexographic printing, • Laser patterningPreferred Qualifications, • Experience with thin-film solar technologies (e.g., perovskite solar cells), • Ink formulation experience, • Design of Experiments (DOE), • Vacuum deposition or atomic layer deposition, • Lean manufacturing knowledge, • Project management experienceEducation & Experience, • Bachelor’s degree in Engineering, Science, or related technical field (advanced degree preferred), • Experience supporting production environments, • Experience with process or product scale-upCore Competencies, • Strong technical and analytical problem-solving skills, • Ability to collaborate across teams and with external partners, • Familiarity with process simulation tools and standard operating procedures, • Experience with CAD/AutoCAD preferred, • Understanding of health and safety regulationsPhysical Requirements, • Ability to bend, twist, push, and pull as needed, • Ability to lift up to 40 lbs #DHIR26

Job Description Senior Specialist, Electrical Engineer (Digital Hardware Design) Rochester, NY Why this role stands out: • Work on next-generation embedded digital hardware supporting advanced Software Defined Radio (SDR) systems, • Full hardware lifecycle ownership from concept through manufacturing and deployment, • Opportunity to solve complex integration challenges in a highly technical aerospace and defense environment, • Strong exposure to high-speed digital design, signal integrity, EMI/EMC compliance, and hardware validation, • 9/80 schedule offering every other Friday off, • Design and develop embedded digital hardware for SDR platforms and accessories, • Work with ARM processors, DDR memory, USB, and Ethernet interfaces, • Lead schematic capture, hardware architecture, and high-speed PCB design analysis, • Perform simulation and analysis using tools such as LTSpice, HyperLynx, and MATLAB, • Execute subsystem and system-level verification and validation testing, • Troubleshoot hardware using oscilloscopes, logic analyzers, and lab instrumentation, • Ensure compliance with MIL-STD-461 and IPC reliability standards, • Bachelor’s degree in Electrical Engineering, Computer Engineering, or related field, • 6+ years of digital hardware design experience, • Strong experience with embedded microprocessor integration and high-speed digital protocols, • Experience with schematic capture tools such as Mentor VX/DxDesigner, • Familiarity with signal integrity analysis and PCB layout concepts, • Ability to obtain a U.S. Security Clearance, • SDR, RF, VHDL, Python, JTAG, or Agile PLM experience is a plus

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Electrical Engineer Your Role: The Electrical Engineer is responsible for machine control hardware and software design, procurement of components, startup, debugging, calibration and verification. This individual will assist with the designing of electrical power and control systems for industrial and commercial equipment used in medical, pharmaceutical, alternative energy, semi-conductor and other industries. They will be supporting the NPI (New Product Introduction) group in the development of new product design and introduction, functional specifications, technical design, automated assembly, development and testing within PEKO and for our customers. Essential Functions: • Create and review electrical schematics, wiring diagrams, and other technical documentation., • Develop and maintain PLC software for various applications, including automation, process control, and robotics., • Assist in creating specifications, critical parameters and statement of work., • Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development., • Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies., • Bachelor's degree in Electrical Engineering or a related field., • 3 years of experience in electromechanical hardware and software design and development., • Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell)., • Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN)., • Experience with electrical testing equipment and procedures., • Excellent analytical, problem-solving, and troubleshooting skills., • Strong communication, interpersonal, and teamwork skills., • Ability to work independently and as part of a team., • Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing)., • Knowledge of text-based languages; C, Java, Python a plus., • Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. Reports To: NPI Engineering Manager Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Compassion: We care about our talented and loyal PEKO family., • Safety: We are committed to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to maintaining an agile and financially prudent organization., • Endurance:We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $80,000 - $90,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR N4jTrb8oH0

Job Description PEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Quality Engineer Your Role: Under the direction of the Quality Director, you will assist in elevating and systematizing engineering and manufacturing processes. Daily activities will require you to proactively identify potential issues to mitigate risk, improve product quality, manage industry and regulatory compliance and assist in delivering corporate strategic initiatives. Essential Functions: • Analyzes quality performance data and metrics to identify and drive improvement opportunities. Actively promote and participate in a cross-functional teamwork environment. * Facilitate and promote the use of appropriate problem-solving techniques for effective root cause analysis and successful corrective action for customer complaints and internal nonconformances. * Understand and promote overall compliance with AS9100/ISO9001 and 13485 specifications as they relate to product conformance and contractual requirements. * Understanding of inspection methodologies used to determine compliance for machined and assembled products. * Manage, conduct, and support internal and external audits, publishing findings and recommendations. * Lead in the implementation of assurances, process controls, and corrective and preventative actions (CAPA) related systems designed to meet or exceed internal and external requirements. * Drives continuous improvement and prevention of future failures by helping facilitate the implementation of corrective action. * May be accountable for projects/ programs and developing methods and parameters, project methodology, and/ or project proposals. * Demonstrate a productive work ethic and commitment to quality that sets the standard for PEKO Standards. Associate degree in Engineering or equivalent. * 2+ years of quality control experience in a manufacturing environment * 4+ years of experience utilization of Quality Management Systems (QMS) * 4+ years of creating and/or managing Design History Files (DHF) and Device Master Records (DMR). * Knowledge of ISO 13485 and AS9100; ability to establish quality protocols and procedures that align with requirements. Preferred Qualifications: * Bachelor’s degree in engineering or equivalent * Strong communication, negotiation, team moderation skills, and ability to manage time and workload constraints. * Good understanding of QA methodologies, tools, and processes. * Knowledge in the application of quality methods and problem-solving tools (TQM, Six Sigma, 8D, 5-Why, Lean Manufacturing, or other continuous improvement methodologies). Work Authorization: US Persons PEKO Perks: * Competitive Compensation * Tuition Reimbursement (IRS Allowable pre-tax Max) * 401K, Medical, Dental, Vision * Flexible Spending & Health Savings Accounts * Life, Short and Long-Term Disability * Recognition Awards & Discretionary Benefits Our Core Values: * Compassion: We care about our talented and loyal PEKO family. * Safety: We are committed to providing a safe, clean, and positive workplace. * Integrity: We believe in transparency, honesty, and respect for all stakeholders. * Agility: We are dedicated to maintaining an agile and financially prudent organization. * Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future. * Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: * This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice A reasonable estimate of the compensation range for this position is $60,000 - $89,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements.. Powered by JazzHR bprvXbhRjI

Job DescriptionDescription: Position Summary: The Quality Engineer performs a variety of quality-related functions in support of regulatory, customer, and company requirements/objectives. In collaboration with the Quality Assurance Manager and the quality team, they will coordinate, develop, monitor, and maintain all necessary procedures, controls, and/or programs to assure compliance with regulatory, customer and company requirements. This position will also support the functions of the Quality Assurance Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties & Responsibilities: • Lead or perform product quality audits to assure compliance with customer, drawing, internal, and regulatory requirements., • Lead or perform system audits in support of the Quality Management System., • Provides liaison activities with customers and suppliers on all quality issues., • Perform review of customer quality documents., • Support operations to ensure that products and processes comply with the relevant requirements of the quality management system., • Analyze product and process failures to ensure effective root cause analysis and implementation of corrective and preventive actions for customers., • Review trend analyses related to field returns, MRBs, supplier defects and provide recommendations for improvement., • Participate or lead root cause corrective action investigations and implementation to address internal, external, customer and/or supplier issues to improve overall product and process quality., • Participate in Engineering and Operations to ensure transfer to Production of new products are in accordance with approved data., • Responsible for leading and/or participating in continual improvement activities to enhance the quality system., • Meets required ISO 9001:2015 standards and necessary training based on the relevant Quality Objectives. Competencies: To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Bachelor’s degree in Quality, Technology, Manufacturing, Mechanical, or related technical field., • 5+ years’ equivalent experience in a Quality Engineering, Quality Assurance, or Quality Control role, or, 3+ years’ equivalent experience with a Graduate degree., • Working knowledge of quality management systems (QMS)., • Experience with root cause analysis and corrective/preventive action (CAPA) methodologies., • Proficiency in quality tools and techniques (e.g., SPC, FMEA, control plans, Pareto analysis, 8D)., • Ability to read and interpret engineering drawings, specifications, and technical documentation., • Experience conducting internal audits and supporting external customer or regulatory audits., • Strong analytical, problem-solving, and organizational skills., • Proficiency with Microsoft Office (Excel, Word, PowerPoint) and basic data analysis Preferred Qualifications: • Master’s degree in Engineering, Quality, or a related technical field., • Quality certification such as CQE, CQA, Six Sigma Green Belt or Black Belt., • Experience in a regulated industry (medical devices, aerospace, automotive, defense, pharmaceutical)., • Knowledge of statistical analysis software (e.g., Minitab, JMP)., • Familiarity with risk management standards (e.g., ISO 14971)., • Hands-on experience with process validation, PPAP, APQP, or production launch support., • Knowledge of Lean manufacturing principles and continuous improvement methodologies. Supervisory Responsibilities: None. Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable. Compensation: In compliance with Pay Transparency requirements, the salary range for this role in New York State is $90,000 - $100,000. This is not a guarantee of compensation or salary, as final offer may vary based on various factors including but not limited to experience and geographic location. Equal Employment Opportunity: Vuzix is committed to a policy of Equal Employment Opportunity with respect to all employees, interns, and applicants for employment. Consistent with this commitment, our policy is to comply with all applicable federal, state, and local laws concerning employment discrimination.

Job DescriptionJob Overview: Join our team as a Digital Hardware Engineer will take ownership of the full hardware lifecycle—from conceptualizing high-level requirements to seeing your designs move through manufacturing and into the field. Key Responsibilities: High-Speed Digital Protocols: • Proficient use of simulation tools such as LTSpice for circuitry, HyperLynx for signal integrity, and MATLAB for system-level modeling., • Advanced Architecture & PCB Design:, • Ability to obtain and maintain a US Security Clearance.Qualifications:, • Bachelor's degree in electrical/computer engineering or a related field. Specialized Knowledge: • Familiarity with SDR architectures, embedded SW/VHDL, and configuration management tools like Agile., • Proficiency with Agile PLM software to manage product data and streamline manufacturing introduction., • Diagnostic Tool Proficiency: Familiarity with Boundary Scan tools (JTAG) for testing high-density PCBAs where physical probe access is limited. Hours:, • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job Description Research Engineer Founded in 2017 and headquartered in Rochester, NY, REMADE℠ is a 170+ member public-private partnership funded in part by the U.S. Department of Energy’s Office of Advanced Materials and Manufacturing Technologies (AMMTO) with an initial investment of $140 million. REMADE is the only national institute focused entirely on developing innovative technologies to accelerate the U.S.’s transition to a Circular Economy. In partnership with industry, academia, trade organizations, and national laboratories, REMADE enables early-stage applied research and development that will create jobs, dramatically reduce embodied energy and greenhouse gas emissions, and increase the supply and use of recycled materials. For more information about REMADE (Reducing EMbodied Energy And Decreasing Emissions), visit . Position Summary The primary responsibility of this position is to support the development and administration of state grant programs that support the creation of technologies to expand the waste tire market and fund demonstration projects aimed at increasing the use of waste tires. This role is vital for driving innovation and fostering sustainable solutions for waste tire management throughout New York State and beyond. The successful candidate will play a major role in managing these grant programs, collaborate with stakeholders, and guide the development of both technology initiatives and demonstration projects focused on expanding the use of waste tires. In addition to managing the tire recycling program, the research engineer will support the broader mission of the Institute by fostering relationships with stakeholders in industry, academia, and government, conducting research on market trends, opportunities, and barriers to new technologies, assisting in the preparation of proposals for securing government or private funding, and contributing to other Institute initiatives as needed. This job is based in the Rochester, NY office. Salary Range: $75k to $90k Primary Responsibilities • Support the development and oversight of a state-funded grant program for waste tire management and the expansion of recycling markets. This includes designing and administering the grant application process, establishing criteria and evaluating proposals, and overseeing the selection and contracting of recipients., • Establish clear objectives, timelines, and milestones for grant recipients. Monitor progress and ensure that projects remain within scope, budget, and timeframe. Conduct site visits and inspections as necessary to evaluate project outcomes and compliance., • Provide technical expertise and guidance to applicants and stakeholders, ensuring that the proposed technologies or solutions meet industry needs and demonstrate feasibility, scalability, and sustainability., • Submit all necessary reporting to state and regulatory bodies. Ensure all activities comply with state laws, regulations, and grant guidelines., • Build strong relationships and promote engagement with stakeholders from industry, academia, and government agencies., • Promote knowledge sharing and best practices in the rubber and tire recycling industry., • Conduct online research to identify market trends, evaluate market opportunities and identify technical, economic, environmental and institutional barriers to the implementation and deployment of new technologies relevant to building a circular economy, • Assist in the preparation of proposals to obtain government and/or private funding of new projects or initiatives, • Experience in one of the following areas:, • Markets for recycled products, preferably rubber, • Technologies for tire recycling, • Rubber compound formulations and manufacturing processes, • Regulations governing waste tire disposal, • Familiarity with New York State businesses involved in tire disposal, recycling, and related activities, • Experience working with federal and/or state agencies, with a preference for candidates who have managed government-funded grant programs, • Project management experience with technical projects in a research environment preferred, • Capable of conducting technology assessments for new and emerging technologies using tools such as technoeconomic analysis, net energy analysis, Lifecyle analysis, and market opportunity analysis., • Benchmarking of new or emerging technology relative to the state-of-the-art, • Ability to systematically analyze complex, technology centric problems, identify technical, economic, market, and institutional barriers to the adoption of emerging technologies, and develop and implement effective solutions., • Strong verbal and written communication skills, and ability to convey complex information in a way that others can readily understand, • Strong attention to detail, ability to multi-task and work effectively in a fast-paced environment, • Grant/proposal writing experience a plus, • Bachelor’s Degree required in engineering or other technical related fieldThe REMADE Institute does not discriminate in the screening or submission of candidates on the basis of race, color, religion, sex, age, national origin, marital status, disability, or other protected status. All applicants must be U.S. citizens or lawful permanent residents Powered by JazzHR pIoDypAmPf

Job Description Applications Engineer - Innovations Team Brinkman Products Brinkman Products is looking for an Applications Engineer to join our Innovations Team. This role is open to entry-level and mid-level engineers who are excited to work hands-on with manufacturing equipment and help deliver complete, turnkey manufacturing solutions for our customers. Whether you're early in your career and eager to learn, or you already have experience and are ready to take on more ownership, this role offers the opportunity to work on real projects that move from concept to production. What You'll Do As part of the Innovations Team, you'll help turn ideas into working manufacturing solutions: • Support the development, testing, and implementation of turnkey manufacturing solutions, • Work hands-on with manufacturing equipment, tooling, fixtures, and processes, • Assist with application development from concept through validation and production handoff, • Collaborate with customers to understand application needs and performance requirements, • Work closely with internal engineering, manufacturing, and sales teams, • Troubleshoot and improve processes to enhance quality, efficiency, and reliability, • Support new product introductions, customer trials, and demonstrations, • Travel to customer facilities as needed to support training, implementation, and startup of manufacturing solutions What We're Looking For • Entry-level: Strong interest in manufacturing, process development, and hands-on engineering, • Mid-level: 3-7 years of experience in manufacturing, applications engineering, process engineering, or similar roles, • Mechanical aptitude and comfort working in a shop or manufacturing environment, • Proficiency with SolidWorks is desired (experience creating or modifying models, fixtures, or tooling), • Lathe/Machining Experience is desired, • Curiosity, problem-solving mindset, and willingness to learn, • Hands-on work: This is not a desk-only engineering role, • Real impact: You'll work on solutions that go into production and directly support customers, • Growth path: Entry-level engineers receive mentorship and training; mid-level engineers gain increased ownership, • Respect for balance: We value sustainable workloads and clear expectations, • Competitive salary based on experience, • Comprehensive medical, dental, and vision benefits, • 401(k) with company match Job Posted by ApplicantPro

Job Description Job Summary: We are seeking an Optical Systems Automation Engineer to design, implement, and maintain automated systems for optical alignment, calibration, and test of imaging and optical assemblies. This role bridges optics, motion control, machine vision, and software, enabling scalable, repeatable, and high-yield manufacturing of optical systems and camera modules. Essential Duties and Responsibilities: Optical Automation & Alignment • Design and implement automated optical alignment systems (active and passive), • Develop focus, centering, tilt, and spacing alignment algorithms, • Integrate cameras, light sources, collimators, targets, and metrology tools, • Optimize alignment speed, accuracy, and yield for production use Test & Calibration Systems • Develop automated optical test stations (MTF, SFR, distortion, FOV, CRA, focus), • Implement calibration routines for imaging systems and optical assemblies, • Automate pass/fail criteria, data capture, and traceability, • Support thermal, vibration, and environmental test automation as needed Software & Controls • Develop automation software (Python, C/C++, LabVIEW, or similar), • Interface with motion controllers, PLCs, frame grabbers, and DAQ hardware, • Implement closed-loop optimization using image-based feedback, • Develop GUIs and operator workflows for manufacturing environments Manufacturing Integration • Transition automation from lab to pilot line to production, • Support yield improvement, cycle time reduction, and process stabilization, • Develop fixtures, tooling, and work instructions, • Support GR&R, Cp/Cpk, and process capability studies Cross-Functional Collaboration • Work closely with optical design, camera systems, mechanical, and quality teams, • Support DFM/DFA decisions related to optical tolerances and assembly strategy, • Troubleshoot optical, mechanical, and software issues in production Education, Skills and Experience: • Bachelor’s or Master’s degree in Optical Engineering, Physics, Mechatronics, Robotics, or related field, • 5+ years experience in optical systems automation or optical manufacturing, • Strong knowledge of optical fabrication, coatings, assembly, and testing methods., • Familiarity with optical design software (Zemax, Code V) or metrology systems (interferometry, profilometry, MTF testing)., • U.S. citizenship or permanent residency required (ITAR compliance)., • Strong understanding of Optical alignment principles and tolerancing, Imaging performance metrics (MTF/SFR, distortion, focus), Motion control systems (stages, encoders, actuators).

Job Description Job Summary: The CNC Programmer is responsible for driving improvements in the performance and capabilities of our precision machining operations that include CNC Milling and Turning equipment. They will lead focused projects to optimize cycle times, improve yields, increase machine efficiencies, and introduce new products into the factory. They will also support the manufacturing operations to deliver quality products on-time to customers. Essential Duties and Responsibilities: • Process development, machine programming, and prototype development work., • Provide technical support to machinists and operators to ensure smooth production runs., • Troubleshooting of equipment issues and resolution of problems related to tooling, setup, and machine performance., • Use CAD and CAM software to create part models, toolpaths, and detailed machining instructions for CNC machines., • Consulting with Chief Manufacturing Engineer, Program Management, Quality, and Engineering regarding part quality requirements and to ensure that designs are manufacturable and meet tolerance requirements., • Consulting with customers and internal applications engineering regarding current projects and upcoming projects., • Participate in strategic improvement events focused on improving throughput, profit margins, and overall manufacturing efficiency., • Lead Quality improvement efforts for assigned work areas / programs., • While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to operate machinery and tools., • The employee may be required to lift up to 50 pounds occasionally., • The work environment includes exposure to noise from machinery and a variety of physical demands, including the use of precision instruments., • Protective equipment such as safety goggles, hearing protection and other safety equipment required to perform the job effectively and in a safe manor., • Bachelor’s of Engineering Degree from a four year college or >5 years related work experience in cnc programming, • Relevant certifications (i.e. MasterCam programming) highly desired., • Hands-on experience with CNC machines, milling machines, lathes, grinders, and other precision machining equipment. Expertise with horizontal and vertical 5 axis milling as well as multi axis turning and mill turn is a must., • Experience using precision measurement instruments (e.g. micrometers, calipers, height gauges, CMM machines), • Solid knowledge of manufacturing quality control processes and standards., • Ability to work independently and in teams in a fast-paced, high-tech environment., • Excellent communication and interpersonal skills aligned with our Mission-Vision-Values., • Proficient in Microsoft Office Suite (Excel, Word, Outlook) and other relevant software for managing production and performance metrics.

Job Description Title Manufacturing Engineer Department Manufacturing Engineering Reports to Director of Production Engineering SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview: As a Manufacturing Engineer, you’ll play a critical role in turning innovative designs into efficient, high‑quality production. You’ll optimize workflows, equipment layouts, and assembly methods to maximize throughput while ensuring products meet exacting standards. Working closely with engineering, production staff, and other manufacturing support personnel, you’ll lead the transition from prototype to volume manufacturing and drive continuous improvements that reduce costs, increase efficiency, and elevate performance. This role blends technical expertise with project leadership, making you a key force in shaping the future of our manufacturing operations. Key Responsibilities: • Lead manufacturing projects end‑to‑end — from planning and scope definition through execution and delivery., • Translate goals into actionable plans by defining tasks, resources, timelines, and success metrics., • Develop and manage detailed project schedules and budgets, ensuring milestones are met on time and within cost targets., • Coordinate cross‑functional teams to align priorities, resolve resource conflicts, and maintain accountability., • Monitor progress with the right tools, tracking deliverables and proactively addressing risks or roadblocks., • Partner with quality assurance to confirm specifications, documentation, and compliance before product release., • Communicate clearly with stakeholders, providing regular updates, reports, and solutions to challenges., • Implement process changes and improvements that enhance efficiency, reduce costs, and strengthen output quality., • Evaluate project outcomes to capture lessons learned and drive continuous improvement across manufacturing operations. Required Qualifications: • Bachelor’s degree in Mechanical, Manufacturing, Industrial, Optical, or Aerospace Engineering. (other closely related engineering disciplines may be considered)., • 3 - 5 years of experience in manufacturing engineering within a precision manufacturing environment, preferably supporting high-precision production processes., • Strong proficiency in Geometric Dimensioning & Tolerancing (GD&T) methods., • Hands‑on experience with 3D modeling software; SolidWorks strongly preferred., • Advanced skills in Microsoft Excel for data analysis and reporting., • Proven ability to read, analyze, and interpret complex technical documents and specifications., • Excellent communication skills with the ability to collaborate effectively across engineering, production, and management teams., • Background in optical assembly processes and precision optics manufacturing techniques a plus. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Work Environment & Physical Demands: • Works in a precision manufacturing environment supporting optical assembly and production operations, with regular time spent on the manufacturing floor and in engineering or office settings., • Frequent interaction with production personnel, manufacturing equipment, tooling, and assembly processes in support of troubleshooting, process development, and continuous improvement activities., • Requires prolonged periods of standing, walking, and moving throughout production areas, with occasional sitting for engineering, documentation, and project-related work., • Regular use of hands for computer work, documentation, handling components, tooling, fixtures, and measurement equipment., • Requires visual acuity for reviewing technical documentation, inspecting components and assemblies, and supporting process verification activities., • Exposure to typical manufacturing conditions, including moving mechanical equipment, moderate noise levels, airborne particles, cleaning agents, adhesives, oils, and solvents., • Required use of personal protective equipment (PPE), including safety glasses and cleanroom or controlled-environment garments, as required by specific production areas., • Occasional lifting or movement of materials, tooling, fixtures, or equipment, typically up to 50 pounds., • May require schedule flexibility or extended hours to support production priorities, troubleshooting activities, or project implementation deadlines. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. This position is scheduled for Monday through Friday, 7:00 AM – 3:30 PM. As a professional engineering role supporting production operations, occasional flexibility outside normal business hours may be required to support manufacturing priorities, project implementation, troubleshooting activities, or critical production needs.

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with manufacturing, quality and engineering departments in developing appropriate quality and manufacturing practices and documentation to meet and exceed customer expectations. Essential Duties and Responsibilities: • Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements., • Assists with work instructions, quality plans and appropriate training documents for manufacturing and quality departments., • May consult with customer’s technical personnel regarding current and upcoming projects or concepts., • Assists with preparation of accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Able to make decisions on new production quotes and expansion of product lines for customers., • Consult with Chief Manufacturing Engineer to improve throughput, profit margins, and efficiency in manufacturing., • Works with manufacturing, quality, and engineering to reduce non-conforming material., • Provide engineering support and input to departments within company., • Assists manufacturing department in development of processes for production., • Authority to cease or allow production on parts that do not meet specs., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency, and makes recommendations., • May represent Manufacturing/Management Department on cross-function teams., • When requested, may work on special projects and various related assignments. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Bachelors’ of Engineering Degree from a four-year college or 5 years related experience and/or training; or equivalent combination of education and experience., • The Manufacturing Engineer is expected to know customer and company requirements by reading, interpreting and understanding the necessary specifications and procedures., • Excellent written and oral communication skills. Must have the ability to translate technical data into a format and language suitable for shop floor personnel., • Strong computer skills used to create elaborate work instructions (CAD, Microsoft Office), • Ability to provide feedback to drive behaviors of employees., • Able to deal with a variety of abstract and concrete variables.

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with manufacturing, quality and engineering departments in developing appropriate quality and manufacturing practices and documentation to meet and exceed customer expectations. Essential Duties and Responsibilities: • Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements., • Assists with work instructions, quality plans and appropriate training documents for manufacturing and quality departments., • May consult with customer’s technical personnel regarding current and upcoming projects or concepts., • Assists with preparation of accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Able to make decisions on new production quotes and expansion of product lines for customers., • Consult with Chief Manufacturing Engineer to improve throughput, profit margins, and efficiency in manufacturing., • Works with manufacturing, quality, and engineering to reduce non-conforming material., • Provide engineering support and input to departments within company., • Assists manufacturing department in development of processes for production., • Authority to cease or allow production on parts that do not meet specs., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency, and makes recommendations., • May represent Manufacturing/Management Department on cross-function teams., • When requested, may work on special projects and various related assignments. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Bachelors’ of Engineering Degree from a four-year college or 5 years related experience and/or training; or equivalent combination of education and experience., • The Manufacturing Engineer is expected to know customer and company requirements by reading, interpreting and understanding the necessary specifications and procedures., • Excellent written and oral communication skills. Must have the ability to translate technical data into a format and language suitable for shop floor personnel., • Strong computer skills used to create elaborate work instructions (CAD, Microsoft Office), • Ability to provide feedback to drive behaviors of employees., • Able to deal with a variety of abstract and concrete variables.

Job Description JOB SUMMARY Under the direct supervision of the Quality Director, with input from the Quality Engineer(s), the CMM Technician performs inspection of machined parts using the multiple CMM’s available to provide data for First Article, In-Process and Final Inspections. JOB REQUIREMENTS Requirements of this position include, but are not limited to: • Pull the correct CMM program and load into the CMM., • Stage the part on the CMM and provide detailed information pertaining to if the machine parts meet all Engineering Drawing / Model / Customer requirements., • Communication of inspection results to machine operators, quality management, engineering team and customers when required., • Understanding of the NCMR process including creating and communicating the NCMR information during a Material review board meeting., • Set up the CMM for inspection based upon priorities established by the Quality Director., • Ability to make minor program adjustments when required and once verified by Senior CMM Technician, or CMM Programmer., • Open plate inspection when required to validate CMM data that may be questionable., • Daily maintenance of CMM’s., • With limited supervision and quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Ability to understand and carry out oral and written directives., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Thorough operational knowledge and skills of specific equipment to be operated, including inspection equipment., • Ability to operate assigned equipment safely and efficiently., • Ability to keep record of time spent and material used., • Ability to use precision measuring tools such as calipers, micrometers and gages., • Ability to read drawings and blueprints and be familiar with common machine tools., • Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals., • Must be able to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems., • Must have a working knowledge of Geometric Dimensioning and Tolerancing, Statistical Process Control, Microsoft Word, Microsoft Excel, and Pc-DMIS., • Must be able to program coordinate measuring machine using Pc-DMIS., • 5 years of experience in inspecting precision machined metal parts, • Vacation, • Sick Days, • Holidays, • Health Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • Voluntary Disability Insurance Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Gender/Sexual Orientation/Gender Identity/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodation for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.